Trim trailing whitespace

374 files changed, 7336 insertions, 7336 deletions

diff --git a/Makefile.am b/Makefile.am
index 9689b58..8565788 100644
--- a/Makefile.am
+++ b/Makefile.am
@@ -13,7 +13,7 @@
 ## Makefile.am
 ## Run automake to generate a Makefile.in from this file.
 ##
-# 
+#
 # This makefile mostly just reinvokes make in the various subdirectories
 # but does so in the correct order.  You can alternatively invoke make from
 # each subdirectory manually.
@@ -45,7 +45,7 @@ include $(top_srcdir)/config/commence.am
 # Since we're explicitly listing DIST_SUBDIRS, we also need to list
 # directories that are only conditionally built (so that their Makefiles
 # are cleaned as well).
-# Note that `make clean' will not affect the examples or doc directories. 
+# Note that `make clean' will not affect the examples or doc directories.
 
 # Conditionals.  These conditionals are defined during configure
 # Define each variable to empty if it is not used to placate pmake
@@ -133,7 +133,7 @@ mostlyclean-local:
 # 'make install' will now install examples, the same as 'make install-all'.
 # 'make-install-all' will be redundant but will still work.
 install: install-recursive install-examples
-uninstall: uninstall-recursive uninstall-examples 
+uninstall: uninstall-recursive uninstall-examples
 
 # 'make install-all' also installs examples
 install-all:
@@ -154,7 +154,7 @@ install-doc:
 uninstall-doc:
 	@echo "docs no longer live in this tree.  Use install-examples to install examples."
 
-# `make check-install' or `make installcheck' checks that examples can 
+# `make check-install' or `make installcheck' checks that examples can
 #  be successfully built
 installcheck-local:
 	if test -n "${DESTDIR}"; then                                  \
diff --git a/README.txt b/README.txt
index 88f1df0..021f217 100644
--- a/README.txt
+++ b/README.txt
@@ -7,8 +7,8 @@ Please refer to the release_docs/INSTALL file for installation instructions.
 THE HDF GROUP
 ---------------
 
-The HDF Group is the developer of HDF5®, a high-performance software library and 
-data format that has been adopted across multiple industries and has become a 
+The HDF Group is the developer of HDF5®, a high-performance software library and
+data format that has been adopted across multiple industries and has become a
 de facto standard in scientific and research communities.
 
 More information about The HDF Group, the HDF5 Community and the HDF5 software
@@ -19,21 +19,21 @@ project, tools and services can be found at the Group's website.
 
 DOCUMENTATION
 -------------
-This release is fully functional for the API described in the documentation. 
+This release is fully functional for the API described in the documentation.
     https://portal.hdfgroup.org/display/HDF5/The+HDF5+API
 
 Full Documentation and Programming Resources for this release can be found at
     https://portal.hdfgroup.org/display/HDF5
 
-See the RELEASE.txt file in the release_docs/ directory for information specific 
-to the features and updates included in this release of the library. 
+See the RELEASE.txt file in the release_docs/ directory for information specific
+to the features and updates included in this release of the library.
 
-Several more files are located within the release_docs/ directory with specific 
+Several more files are located within the release_docs/ directory with specific
 details for several common platforms and configurations.
 
     INSTALL - Start Here. General instructions for compiling and installing the library
     INSTALL_CMAKE  - instructions for building with CMake (Kitware.com)
-    INSTALL_parallel - instructions for building and configuring Parallel HDF5 
+    INSTALL_parallel - instructions for building and configuring Parallel HDF5
     INSTALL_Windows and INSTALL_Cygwin - MS Windows installations.
 
 
@@ -48,7 +48,7 @@ Information regarding Help Desk and Support services is available at
 
 FORUM and NEWS
 --------------
-The following public forums are provided for public announcements and discussions 
+The following public forums are provided for public announcements and discussions
 of interest to the general HDF5 Community.
 
     Homepage of the Forum
@@ -59,10 +59,10 @@ of interest to the general HDF5 Community.
 
     HDF5 and HDF4 Topics
         https://forum.hdfgroup.org/c/hdf5
- 
-These forums are provided as an open and public service for searching and reading. 
-Posting requires completing a simple registration and allows one to join in the 
-conversation.  Please read the following instructions pertaining to the Forum's 
+
+These forums are provided as an open and public service for searching and reading.
+Posting requires completing a simple registration and allows one to join in the
+conversation.  Please read the following instructions pertaining to the Forum's
 use and configuration
     https://forum.hdfgroup.org/t/quickstart-guide-welcome-to-the-new-hdf-forum
 
diff --git a/acsite.m4 b/acsite.m4
index 9d04d1a..9477009 100644
--- a/acsite.m4
+++ b/acsite.m4
@@ -21,9 +21,9 @@ dnl -------------------------------------------------------------------------
 dnl _AC_SYS_LARGEFILE_MACRO_VALUE
 dnl
 dnl The following macro overrides the autoconf macro of the same name
-dnl with this custom definition. This macro performs the same checks as 
+dnl with this custom definition. This macro performs the same checks as
 dnl autoconf's native _AC_SYS_LARGEFILE_MACRO_VALUE, but will also set
-dnl AM_CPPFLAGS with the appropriate -D defines so additional configure 
+dnl AM_CPPFLAGS with the appropriate -D defines so additional configure
 dnl sizeof checks do not fail.
 dnl
 # _AC_SYS_LARGEFILE_MACRO_VALUE(C-MACRO, VALUE,
diff --git a/bin/batch/ctestP.sl.in.cmake b/bin/batch/ctestP.sl.in.cmake
index 6399de7..1069fa9 100644
--- a/bin/batch/ctestP.sl.in.cmake
+++ b/bin/batch/ctestP.sl.in.cmake
@@ -10,5 +10,5 @@
 cd @HDF5_BINARY_DIR@
 ctest . -R MPI_TEST_ -C Release -T test >& ctestP.out
 
-echo "Done running ctestP.sl" 
+echo "Done running ctestP.sl"
 
diff --git a/bin/h5cc.in b/bin/h5cc.in
index d6b7a12..62a0884 100644
--- a/bin/h5cc.in
+++ b/bin/h5cc.in
@@ -83,10 +83,10 @@ CLINKERBASE="@CC@"
 # CFLAGS, CPPFLAGS and LDFLAGS are reserved for use by the script user.
 # FLAGS brought from the hdf5 build are put in H5BLD_*FLAGS.
 
-# User's CPPFLAGS and CFLAGS come after their H5BLD counterparts.  User's 
-# LDFLAGS come just before clibpath, user's LIBS come after $link_objs and 
-# before the hdf5 libraries in $link_args, followed by any external library 
-# paths and libraries from AM_LDFLAGS, LDFLAGS, AM_LIBS or LIBS carried in 
+# User's CPPFLAGS and CFLAGS come after their H5BLD counterparts.  User's
+# LDFLAGS come just before clibpath, user's LIBS come after $link_objs and
+# before the hdf5 libraries in $link_args, followed by any external library
+# paths and libraries from AM_LDFLAGS, LDFLAGS, AM_LIBS or LIBS carried in
 # from the hdf5 build. The order of the flags is intended to give precedence
 # to the user's flags.
 H5BLD_CFLAGS="@AM_CFLAGS@ @CFLAGS@"
@@ -102,9 +102,9 @@ LDFLAGS="${HDF5_LDFLAGS:-$LDFLAGSBASE}"
 LIBS="${HDF5_LIBS:-$LIBSBASE}"
 
 # If a static library is available, the default will be to use it.  If the only
-# available library is shared, it will be used by default.  The user can 
+# available library is shared, it will be used by default.  The user can
 # override either default, although choosing an unavailable library will result
-# in link errors.  
+# in link errors.
 STATIC_AVAILABLE="@enable_static@"
 if test "${STATIC_AVAILABLE}" = "yes"; then
   USE_SHARED_LIB="${HDF5_USE_SHLIB:-no}"
@@ -140,7 +140,7 @@ usage() {
   echo "   HDF5_CC                  -  use a different C compiler"
   echo "   HDF5_CLINKER             -  use a different linker"
   echo "   HDF5_USE_SHLIB=[yes|no]  -  use shared or static version of the HDF5 library"
-  echo "                                 [default: no except when built with only" 
+  echo "                                 [default: no except when built with only"
   echo "                                           shared libraries]"
   echo " "
   echo " You can also add or change paths and flags to the compile line using"
@@ -318,7 +318,7 @@ fi
 
 if test "x$do_link" = "xyes"; then
   shared_link=""
-# conditionnaly link with the hl library  
+# conditionnaly link with the hl library
   if test "X$HL" = "Xhl"; then
    libraries=" $libraries -lhdf5_hl -lhdf5 "
   else
@@ -379,10 +379,10 @@ if test "x$do_link" = "xyes"; then
   # module. It's okay if they're included twice in the compile line.
   link_args="$link_args $H5BLD_LDFLAGS $H5BLD_LIBS"
 
-  # User's CPPFLAGS and CFLAGS come after their H5BLD counterparts.  User's 
-  # LDFLAGS come just before clibpath, user's LIBS come after $link_objs and 
-  # before the hdf5 libraries in $link_args, followed by any external library 
-  # paths and libraries from AM_LDFLAGS, LDFLAGS, AM_LIBS or LIBS carried in 
+  # User's CPPFLAGS and CFLAGS come after their H5BLD counterparts.  User's
+  # LDFLAGS come just before clibpath, user's LIBS come after $link_objs and
+  # before the hdf5 libraries in $link_args, followed by any external library
+  # paths and libraries from AM_LDFLAGS, LDFLAGS, AM_LIBS or LIBS carried in
   # from the hdf5 build. The order of the flags is intended to give precedence
   # to the user's flags.
   $SHOW $CLINKER $H5BLD_CPPFLAGS $CPPFLAGS $H5BLD_CFLAGS $CFLAGS $LDFLAGS $clibpath $link_objs $LIBS $link_args $shared_link
diff --git a/c++/Makefile.am b/c++/Makefile.am
index 319ce6e..6bd682d 100644
--- a/c++/Makefile.am
+++ b/c++/Makefile.am
@@ -14,7 +14,7 @@
 ## Run automake to generate a Makefile.in from this file.
 #
 # Top-level HDF5-C++ Makefile(.in)
-# 
+#
 
 include $(top_srcdir)/config/commence.am
 
diff --git a/c++/examples/h5tutr_cmprss.cpp b/c++/examples/h5tutr_cmprss.cpp
index 9531bdd..e3cf978 100644
--- a/c++/examples/h5tutr_cmprss.cpp
+++ b/c++/examples/h5tutr_cmprss.cpp
@@ -42,7 +42,7 @@ int main (void)
         // handle the errors appropriately
         Exception::dontPrint();
 
-        // Create a new file using the default property lists. 
+        // Create a new file using the default property lists.
         H5File file(FILE_NAME, H5F_ACC_TRUNC);
 
         // Create the data space for the dataset.
@@ -60,9 +60,9 @@ int main (void)
         // unsigned szip_options_mask = H5_SZIP_NN_OPTION_MASK;
         // unsigned szip_pixels_per_block = 16;
         // plist->setSzip(szip_options_mask, szip_pixels_per_block);
-     
-        // Create the dataset.      
-        DataSet *dataset = new DataSet(file.createDataSet( DATASET_NAME, 
+
+        // Create the dataset.
+        DataSet *dataset = new DataSet(file.createDataSet( DATASET_NAME,
                                 PredType::STD_I32BE, *dataspace, *plist) );
 
         for (i = 0; i< DIM0; i++)
@@ -79,10 +79,10 @@ int main (void)
         file.close();
 
         // -----------------------------------------------
-        // Re-open the file and dataset, retrieve filter 
+        // Re-open the file and dataset, retrieve filter
         // information for dataset and read the data back.
         // -----------------------------------------------
-        
+
         int        rbuf[DIM0][DIM1];
         int        numfilt;
         size_t     nelmts={1}, namelen={1};
@@ -113,7 +113,7 @@ int main (void)
                    cout << "H5Z_FILTER_DEFLATE" << endl;
                    break;
               case H5Z_FILTER_SZIP:
-                   cout << "H5Z_FILTER_SZIP" << endl; 
+                   cout << "H5Z_FILTER_SZIP" << endl;
                    break;
               default:
                    cout << "Other filter type included." << endl;
@@ -123,7 +123,7 @@ int main (void)
         // Read data.
         dataset->read(rbuf, PredType::NATIVE_INT);
 
-        delete plist; 
+        delete plist;
         delete dataset;
         file.close();   // can be skipped
 
diff --git a/c++/examples/h5tutr_crtatt.cpp b/c++/examples/h5tutr_crtatt.cpp
index fcf6c27..409bd62 100644
--- a/c++/examples/h5tutr_crtatt.cpp
+++ b/c++/examples/h5tutr_crtatt.cpp
@@ -31,7 +31,7 @@ int main (void)
 {
    int attr_data[2] = { 100, 200};
    hsize_t dims[1] = { DIM1 };
-   
+
 
    // Try block to detect exceptions raised by any of the calls inside it
    try
@@ -47,11 +47,11 @@ int main (void)
         // Create the data space for the attribute.
         DataSpace attr_dataspace = DataSpace (1, dims );
 
-        // Create a dataset attribute. 
-        Attribute attribute = dataset.createAttribute( ATTR_NAME, PredType::STD_I32BE, 
+        // Create a dataset attribute.
+        Attribute attribute = dataset.createAttribute( ATTR_NAME, PredType::STD_I32BE,
                                                   attr_dataspace);
-     
-        // Write the attribute data. 
+
+        // Write the attribute data.
         attribute.write( PredType::NATIVE_INT, attr_data);
 
    }  // end of try block
diff --git a/c++/examples/h5tutr_crtdat.cpp b/c++/examples/h5tutr_crtdat.cpp
index 985f6ac..3257223 100644
--- a/c++/examples/h5tutr_crtdat.cpp
+++ b/c++/examples/h5tutr_crtdat.cpp
@@ -37,7 +37,7 @@ int main (void)
         // handle the errors appropriately
         Exception::dontPrint();
 
-        // Create a new file using the default property lists. 
+        // Create a new file using the default property lists.
         H5File file(FILE_NAME, H5F_ACC_TRUNC);
 
         // Create the data space for the dataset.
@@ -46,7 +46,7 @@ int main (void)
         dims[1] = NY;
         DataSpace dataspace(RANK, dims);
 
-        // Create the dataset.      
+        // Create the dataset.
         DataSet dataset = file.createDataSet(DATASET_NAME, PredType::STD_I32BE, dataspace);
 
     }  // end of try block
diff --git a/c++/examples/h5tutr_crtgrp.cpp b/c++/examples/h5tutr_crtgrp.cpp
index e35cb46..43af08a 100644
--- a/c++/examples/h5tutr_crtgrp.cpp
+++ b/c++/examples/h5tutr_crtgrp.cpp
@@ -37,12 +37,12 @@ int main(void)
 
         // Create a new file using default property lists.
         H5File file(FILE_NAME, H5F_ACC_TRUNC);
-        
+
         // Create a group named "/MygGroup" in the file
         Group group(file.createGroup("/MyGroup"));
 
         // File and group will be closed as their instances go out of scope.
-   
+
     } // end of try block
 
     // catch failure caused by the H5File operations
@@ -57,6 +57,6 @@ int main(void)
         error.printErrorStack();
         return -1;
     }
- 
+
     return 0;
 }
diff --git a/c++/examples/h5tutr_crtgrpar.cpp b/c++/examples/h5tutr_crtgrpar.cpp
index 76ec9e5..15cf1df 100644
--- a/c++/examples/h5tutr_crtgrpar.cpp
+++ b/c++/examples/h5tutr_crtgrpar.cpp
@@ -32,7 +32,7 @@ int main(void)
     // Try block to detect exceptions raised by any of the calls inside it
     try
     {
-      
+
         // Turn off the auto-printing when failure occurs so that we can
         // handle the errors appropriately.
 
@@ -43,26 +43,26 @@ int main(void)
         H5File file(FILE_NAME, H5F_ACC_TRUNC);
 
         // Create group "MyGroup" in the root group using an absolute name.
-         
+
         Group group1(file.createGroup( "/MyGroup"));
- 
+
         // Create group "Group_A" in group "MyGroup" using an
         // absolute name.
 
-        Group group2(file.createGroup("/MyGroup/Group_A"));   
+        Group group2(file.createGroup("/MyGroup/Group_A"));
 
         // Create group "Group_B" in group "MyGroup" using a
         // relative name.
-  
+
         Group group3(group1.createGroup ("Group_B"));
- 
+
         // Close the groups and file.
 
         group1.close();
         group2.close();
         group3.close();
         file.close();
-    
+
     } // end of try block
 
     // catch failure caused by the File operations
diff --git a/c++/examples/h5tutr_crtgrpd.cpp b/c++/examples/h5tutr_crtgrpd.cpp
index e3bb1b1..c28b666 100644
--- a/c++/examples/h5tutr_crtgrpd.cpp
+++ b/c++/examples/h5tutr_crtgrpd.cpp
@@ -45,12 +45,12 @@ int main(void)
         // handle the errors appropriately
         Exception::dontPrint();
 
-        // Initialize the first dataset. 
+        // Initialize the first dataset.
         for (i = 0; i < D1DIM1; i++)
             for (j = 0; j < D1DIM2; j++)
                dset1_data[i][j] = j + 1;
 
-        //  Initialize the second dataset. 
+        //  Initialize the second dataset.
         for (i = 0; i < D2DIM1; i++)
           for (j = 0; j < D2DIM2; j++)
               dset2_data[i][j] = j + 1;
@@ -69,7 +69,7 @@ int main(void)
 
         // Create the dataset in group "MyGroup".  Same note as for the
         // dataspace above.
-        DataSet *dataset = new DataSet (file.createDataSet(DATASET_NAME1, 
+        DataSet *dataset = new DataSet (file.createDataSet(DATASET_NAME1,
                                          PredType::STD_I32BE, *dataspace));
 
         // Write the data to the dataset using default memory space, file
@@ -89,7 +89,7 @@ int main(void)
         Group group(file.openGroup("/MyGroup/Group_A"));
 
         // Create the second dataset in group "Group_A".
-        dataset = new DataSet (group.createDataSet(DATASET_NAME2, 
+        dataset = new DataSet (group.createDataSet(DATASET_NAME2,
                                          PredType::STD_I32BE, *dataspace));
 
         // Write the data to the dataset using default memory space, file
@@ -100,7 +100,7 @@ int main(void)
         delete dataspace;
         delete dataset;
         group.close();
-    
+
     } // end of try block
 
     // catch failure caused by the H5File operations
@@ -129,6 +129,6 @@ int main(void)
         error.printErrorStack();
         return -1;
     }
- 
+
      return 0;
 }
diff --git a/c++/examples/h5tutr_extend.cpp b/c++/examples/h5tutr_extend.cpp
index b6927ea..94e9acf 100644
--- a/c++/examples/h5tutr_extend.cpp
+++ b/c++/examples/h5tutr_extend.cpp
@@ -30,17 +30,17 @@ const H5std_string      DATASETNAME("ExtendibleArray");
 int main (void)
 {
      hsize_t dims[2] = {3,3};           // dataset dimensions at creation
-     hsize_t maxdims[2] = {H5S_UNLIMITED, H5S_UNLIMITED}; 
+     hsize_t maxdims[2] = {H5S_UNLIMITED, H5S_UNLIMITED};
      hsize_t chunk_dims[2] ={2, 5};
-     int           data[3][3] = { {1, 1, 1},    // data to write 
+     int           data[3][3] = { {1, 1, 1},    // data to write
                                   {1, 1, 1},
                                   {1, 1, 1} };
 
-     // Variables used in extending and writing to the extended portion of dataset 
+     // Variables used in extending and writing to the extended portion of dataset
 
      hsize_t size[2];
      hsize_t offset[2];
-     hsize_t dimsext[2] = {7, 3};         // extend dimensions 
+     hsize_t dimsext[2] = {7, 3};         // extend dimensions
      int     dataext[7][3] = { {2, 3, 4},
                                       {2, 3, 4},
                                       {2, 3, 4},
@@ -56,7 +56,7 @@ int main (void)
         // handle the errors appropriately
         Exception::dontPrint();
 
-        // Create a new file using the default property lists. 
+        // Create a new file using the default property lists.
         H5File file(FILE_NAME, H5F_ACC_TRUNC);
 
         // Create the data space for the dataset.  Note the use of pointer
@@ -70,23 +70,23 @@ int main (void)
         prop.setChunk(2, chunk_dims);
 
         // Create the chunked dataset.  Note the use of pointer.
-        DataSet *dataset = new DataSet(file.createDataSet( DATASETNAME, 
+        DataSet *dataset = new DataSet(file.createDataSet( DATASETNAME,
                                  PredType::STD_I32BE, *dataspace, prop) );
- 
+
         // Write data to dataset.
         dataset->write(data, PredType::NATIVE_INT);
 
         // Extend the dataset. Dataset becomes 10 x 3.
         size[0] = dims[0] + dimsext[0];
         size[1] = dims[1];
-        dataset->extend(size); 
+        dataset->extend(size);
 
         // Select a hyperslab in extended portion of the dataset.
         DataSpace *filespace = new DataSpace(dataset->getSpace ());
         offset[0] = 3;
         offset[1] = 0;
         filespace->selectHyperslab(H5S_SELECT_SET, dimsext, offset);
-        
+
         // Define memory space.
         DataSpace *memspace = new DataSpace(2, dimsext, NULL);
 
@@ -101,9 +101,9 @@ int main (void)
         delete dataset;
         file.close();
 
-        // --------------------------------------- 
+        // ---------------------------------------
         // Re-open the file and read the data back
-        // --------------------------------------- 
+        // ---------------------------------------
 
         int        rdata[10][3];
         int        i,j, rank, rank_chunk;
@@ -111,7 +111,7 @@ int main (void)
 
         // Open the file and dataset.
         file.openFile(FILE_NAME, H5F_ACC_RDONLY);
-        dataset = new DataSet(file.openDataSet( DATASETNAME)); 
+        dataset = new DataSet(file.openDataSet( DATASETNAME));
 
         // Get the dataset's dataspace and creation property list.
         filespace = new DataSpace(dataset->getSpace());
@@ -127,7 +127,7 @@ int main (void)
 
         memspace = new DataSpace(rank, dimsr, NULL);
         dataset->read(rdata, PredType::NATIVE_INT, *memspace, *filespace);
-      
+
         cout << endl;
         for (j = 0; j < dimsr[0]; j++) {
             for (i = 0; i < dimsr[1]; i++)
@@ -141,7 +141,7 @@ int main (void)
         delete memspace;
         delete dataset;
         file.close();
-      
+
     }  // end of try block
 
     // catch failure caused by the H5File operations
diff --git a/c++/examples/h5tutr_rdwt.cpp b/c++/examples/h5tutr_rdwt.cpp
index f17e6a5..e9b76ad 100644
--- a/c++/examples/h5tutr_rdwt.cpp
+++ b/c++/examples/h5tutr_rdwt.cpp
@@ -28,9 +28,9 @@ const int       DIM1 = 6;
 
 int main (void)
 {
-    
+
     // Data initialization.
-     
+
     int i, j;
     int data[DIM0][DIM1];           // buffer for data to write
 
diff --git a/c++/examples/h5tutr_subset.cpp b/c++/examples/h5tutr_subset.cpp
index 0747880..f7d0513 100644
--- a/c++/examples/h5tutr_subset.cpp
+++ b/c++/examples/h5tutr_subset.cpp
@@ -46,19 +46,19 @@ int main (void)
         Exception::dontPrint();
 
         // ---------------------------------------------------
-        // Create a new file using the default property lists. 
-        // Then create a dataset and write data to it. 
+        // Create a new file using the default property lists.
+        // Then create a dataset and write data to it.
         // Close the file and dataset.
         // ---------------------------------------------------
-      
+
         H5File file(FILE_NAME, H5F_ACC_TRUNC);
 
-        hsize_t dims[2];              
+        hsize_t dims[2];
         dims[0] = DIM0;
         dims[1] = DIM1;
         DataSpace dataspace = DataSpace (RANK, dims);
 
-        DataSet dataset(file.createDataSet( DATASET_NAME, 
+        DataSet dataset(file.createDataSet( DATASET_NAME,
                                          PredType::STD_I32BE, dataspace) );
 
 
@@ -94,7 +94,7 @@ int main (void)
         file.openFile(FILE_NAME, H5F_ACC_RDWR);
         dataset = file.openDataSet(DATASET_NAME);
 
-        // Specify size and shape of subset to write. 
+        // Specify size and shape of subset to write.
 
         offset[0] = 1;
         offset[1] = 2;
@@ -107,7 +107,7 @@ int main (void)
 
         block[0] = 1;
         block[1] = 1;
-  
+
         // Define Memory Dataspace. Get file dataspace and select
         // a subset from the file dataspace.
 
@@ -117,7 +117,7 @@ int main (void)
         DataSpace memspace(RANK, dimsm, NULL);
 
         dataspace = dataset.getSpace();
-        dataspace.selectHyperslab(H5S_SELECT_SET, count, offset, stride, block); 
+        dataspace.selectHyperslab(H5S_SELECT_SET, count, offset, stride, block);
 
         // Write a subset of data to the dataset, then read the
         // entire dataset back from the file.
@@ -127,15 +127,15 @@ int main (void)
         for (j = 0; j < DIM0_SUB; j++) {
             for (i = 0; i < DIM1_SUB; i++)
                sdata[j][i] = 5;
-        } 
-        
+        }
+
         dataset.write(sdata, PredType::NATIVE_INT, memspace, dataspace);
         dataset.read(rdata, PredType::NATIVE_INT);
 
- 
+
         cout << endl << "Data in File after Subset is Written:" << endl;
         for (i = 0; i < DIM0; i++) {
-            for (j = 0; j < DIM1; j++) 
+            for (j = 0; j < DIM1; j++)
                cout << " " <<  rdata[i][j];
             cout << endl;
         }
diff --git a/c++/examples/run-c++-ex.sh.in b/c++/examples/run-c++-ex.sh.in
index 03e1eac..7ff8506 100644
--- a/c++/examples/run-c++-ex.sh.in
+++ b/c++/examples/run-c++-ex.sh.in
@@ -141,5 +141,5 @@ rm *.o
 rm *.h5
 echo
 
-exit $EXIT_VALUE 
+exit $EXIT_VALUE
 
diff --git a/c++/src/H5CppDoc.h b/c++/src/H5CppDoc.h
index 5e80408..1108181 100644
--- a/c++/src/H5CppDoc.h
+++ b/c++/src/H5CppDoc.h
@@ -25,7 +25,7 @@
  * \section intro_sec Introduction
  *
  * The C++ API provides C++ wrappers for the HDF5 C Library.
- * 
+ *
  * It is assumed that the user has knowledge of the HDF5 file format and its
  * components.  For more information on the HDF5 C Library, please refer to
  * the HDF5 Software Documentation page.
@@ -54,9 +54,9 @@
  * \section install_sec Installation
  *
  * The HDF5 C++ API is included with the HDF5 source code.
- * 
- * Please refer to the release_docs/INSTALL file under the top directory 
- * of the HDF5 source code for information about installing, building, 
+ *
+ * Please refer to the release_docs/INSTALL file under the top directory
+ * of the HDF5 source code for information about installing, building,
  * and testing the C++ API.
  *
  * <br />
diff --git a/c++/src/H5DataType.cpp b/c++/src/H5DataType.cpp
index 081cc03..0472975 100644
--- a/c++/src/H5DataType.cpp
+++ b/c++/src/H5DataType.cpp
@@ -122,7 +122,7 @@ DataType::DataType(const H5Location& loc, const void* ref, H5R_type_t ref_type,
 {
     id = H5Location::p_dereference(attr.getId(), ref, ref_type, plist, "constructor - by dereference");
 }
- */ 
+ */
 
 //--------------------------------------------------------------------------
 // Function:    DataType copy constructor
diff --git a/c++/src/H5Exception.cpp b/c++/src/H5Exception.cpp
index cf9e577..7431e6c 100644
--- a/c++/src/H5Exception.cpp
+++ b/c++/src/H5Exception.cpp
@@ -60,7 +60,7 @@ H5std_string Exception::getMajorString(hid_t err_major) const
 {
     // Preliminary call to H5Eget_msg() to get the length of the message
     ssize_t mesg_size = H5Eget_msg(err_major, NULL, NULL, 0);
- 
+
     // If H5Eget_msg() returns a negative value, raise an exception,
     if (mesg_size < 0)
         throw IdComponentException("Exception::getMajorString",
diff --git a/c++/src/H5IntType.cpp b/c++/src/H5IntType.cpp
index 49c638e..01c20e9 100644
--- a/c++/src/H5IntType.cpp
+++ b/c++/src/H5IntType.cpp
@@ -83,7 +83,7 @@ IntType::IntType(const DataSet& dataset) : AtomType()
 {
     // Calls C function H5Dget_type to get the id of the datatype
     id = H5Dget_type(dataset.getId());
- 
+
     if (id < 0)
     {
         throw DataSetIException("IntType constructor", "H5Dget_type failed");
diff --git a/c++/src/H5Location.cpp b/c++/src/H5Location.cpp
index 764aa12..89a7890 100644
--- a/c++/src/H5Location.cpp
+++ b/c++/src/H5Location.cpp
@@ -568,7 +568,7 @@ void H5Location::dereference(const H5Location& loc, const void* ref, H5R_type_t
 {
    p_setId(p_dereference(attr.getId(), ref, ref_type, plist, "dereference"));
 }
- */ 
+ */
 
 #ifndef H5_NO_DEPRECATED_SYMBOLS
 //--------------------------------------------------------------------------
diff --git a/c++/src/H5Location.h b/c++/src/H5Location.h
index 3bad8bc..3c30715 100644
--- a/c++/src/H5Location.h
+++ b/c++/src/H5Location.h
@@ -72,7 +72,7 @@ class H5_DLLCPP H5Location : public IdComponent {
 
         // Creates a reference to a named object or to a dataset region
         // in this object.
-        void reference(void* ref, const char* name, 
+        void reference(void* ref, const char* name,
                         H5R_type_t ref_type = H5R_OBJECT) const;
         void reference(void* ref, const H5std_string& name,
                         H5R_type_t ref_type = H5R_OBJECT) const;
diff --git a/c++/src/H5Object.h b/c++/src/H5Object.h
index 033b1b7..a63229c 100644
--- a/c++/src/H5Object.h
+++ b/c++/src/H5Object.h
@@ -31,7 +31,7 @@ namespace H5 {
                 H5Object is H5File is not an HDF5 object, and renaming H5Object
                 to H5Location will risk breaking user applications.
                 -BMR
-        Apr 2, 2014: Added wrapper getObjName for H5Iget_name 
+        Apr 2, 2014: Added wrapper getObjName for H5Iget_name
         Sep 21, 2016: Rearranging classes (HDFFV-9920) moved H5A wrappers back
                 into H5Object.  This way, C functions that takes attribute id
                 can be in H5Location and those that cannot take attribute id
diff --git a/c++/src/h5c++.in b/c++/src/h5c++.in
index f068f51..5a542f9 100644
--- a/c++/src/h5c++.in
+++ b/c++/src/h5c++.in
@@ -311,7 +311,7 @@ fi
 
 if test "x$do_link" = "xyes"; then
   shared_link=""
-  # conditionally link with the hl library  
+  # conditionally link with the hl library
   if test "X$HL" = "Xhl"; then
    libraries=" $libraries -lhdf5_hl_cpp -lhdf5_cpp -lhdf5_hl -lhdf5 "
   else
diff --git a/c++/test/dsets.cpp b/c++/test/dsets.cpp
index fc29307..76e4424 100644
--- a/c++/test/dsets.cpp
+++ b/c++/test/dsets.cpp
@@ -268,7 +268,7 @@ static herr_t test_simple_io( H5File& file)
 /*-------------------------------------------------------------------------
  * Function:    test_datasize
  *
- * Purpose      Tests DataSet::getInMemDataSize().  
+ * Purpose      Tests DataSet::getInMemDataSize().
  *
  * Return       Success: 0
  *
@@ -901,7 +901,7 @@ static herr_t test_multiopen (H5File& file)
         if (cur_size[0]!=tmp_size[0])
         {
             cerr << "    Got " << static_cast<int>(tmp_size[0])
-                 << " instead of " << static_cast<int>(cur_size[0]) 
+                 << " instead of " << static_cast<int>(cur_size[0])
                  << "!" << endl;
             throw Exception("test_multiopen", "Failed in multi-open with extending");
         }
diff --git a/c++/test/h5cpputil.h b/c++/test/h5cpputil.h
index 18fd44f..6664d0c 100644
--- a/c++/test/h5cpputil.h
+++ b/c++/test/h5cpputil.h
@@ -55,7 +55,7 @@ class TestFailedException : public Exception {
 
 // Overloaded/Template functions to verify values and display proper info
 
-// Verifies 
+// Verifies
 void verify_val(const char* x, const char* value, const char* where, int line, const char* file_name);
 
 template <class Type1, class Type2>
diff --git a/c++/test/tarray.cpp b/c++/test/tarray.cpp
index fccc556..f079780 100644
--- a/c++/test/tarray.cpp
+++ b/c++/test/tarray.cpp
@@ -210,7 +210,7 @@ static void test_array_compound_array()
         // Verify the compound datatype info
         CompType ctype_check(base_type.getId());
         base_type.close();
-        
+
         // Check the number of members
         nmemb = ctype_check.getNmembers();
         verify_val(nmemb, 2, "ctype_check.getNmembers", __LINE__, __FILE__);
@@ -282,11 +282,11 @@ static void test_array_compound_array()
  */
 H5::DataType getArr()
 {
-    hsize_t *dims = new hsize_t; 
-    *dims = 5; 
-    H5::ArrayType ret; 
-    ret = H5::ArrayType(H5::PredType::NATIVE_INT, 1, dims); 
-    delete dims; 
+    hsize_t *dims = new hsize_t;
+    *dims = 5;
+    H5::ArrayType ret;
+    ret = H5::ArrayType(H5::PredType::NATIVE_INT, 1, dims);
+    delete dims;
     return ret;
 }
 
diff --git a/c++/test/tattr.cpp b/c++/test/tattr.cpp
index 9485ec6..f432723 100644
--- a/c++/test/tattr.cpp
+++ b/c++/test/tattr.cpp
@@ -282,7 +282,7 @@ static void test_attr_getname()
         if (attr_exists == false)
             throw InvalidActionException("H5File::attrExists", "Attribute should exist but does not");
 
-        // Open attribute 
+        // Open attribute
         Attribute fattr1(fid1.openAttribute(FATTR1_NAME));
 
         // A. Get attribute name with
@@ -1221,7 +1221,7 @@ static void test_attr_delete()
         attr_name = fattr.getName();
         verify_val(attr_name, FATTR1_NAME, "Attribute::getName", __LINE__, __FILE__);
         fattr.close();
-        
+
         // Test deleting non-existing attribute
 
         // Open the dataset
diff --git a/c++/test/tfile.cpp b/c++/test/tfile.cpp
index a0231a6..f5625a3 100644
--- a/c++/test/tfile.cpp
+++ b/c++/test/tfile.cpp
@@ -633,7 +633,7 @@ static void test_file_attribute()
         verify_val(num_objs, 0, "H5File::getObjCount(H5F_OBJ_DATATYPE)", __LINE__, __FILE__);
         num_objs = file5.getObjCount(H5F_OBJ_FILE);
         verify_val(num_objs, 1, "H5File::getObjCount(H5F_OBJ_FILE)", __LINE__, __FILE__);
-        
+
         // Get the file name using the attributes
         H5std_string fname = fattr1.getFileName();
         verify_val(fname, FILE5, "H5File::getFileName()", __LINE__, __FILE__);
@@ -984,7 +984,7 @@ static void test_file_info()
     /*  ret=H5Pget_shared_mesg_nindexes(fcpl2,&nindexes);
     CHECK(ret, FAIL, "H5Pget_shared_mesg_nindexes");
     VERIFY(nindexes, MISC11_NINDEXES, "H5Pget_shared_mesg_nindexes");
- */ 
+ */
 
         // Get and verify the file space info from the creation property list */
         fcpl2.getFileSpaceStrategy(out_strategy, out_persist, out_threshold);
diff --git a/c++/test/titerate.cpp b/c++/test/titerate.cpp
index c689087..d69e8d2 100644
--- a/c++/test/titerate.cpp
+++ b/c++/test/titerate.cpp
@@ -400,7 +400,7 @@ static void test_HDFFV_9920()
 {
     int attr_data[2] = { 100, 200};
     hsize_t dims[1] = { DIM1 };
-    
+
     try
     {
         // Create a new file and a group in it
@@ -414,13 +414,13 @@ static void test_HDFFV_9920()
         DataSet fds = file.createDataSet(FDATASET_NAME, PredType::STD_I32BE, dspace);
         DataSet gds = gr1.createDataSet(GDATASET_NAME, PredType::STD_I32BE, dspace);
 
-        // Create a file attribute and a group attribute. 
-        Attribute fa1 = file.createAttribute(FATTR_NAME, PredType::STD_I32BE, 
+        // Create a file attribute and a group attribute.
+        Attribute fa1 = file.createAttribute(FATTR_NAME, PredType::STD_I32BE,
                                                   dspace);
-        Attribute ga1 = gr1.createAttribute(GATTR_NAME, PredType::STD_I32BE, 
+        Attribute ga1 = gr1.createAttribute(GATTR_NAME, PredType::STD_I32BE,
                                                   dspace);
-     
-        // Write the attribute data. 
+
+        // Write the attribute data.
         fa1.write( PredType::NATIVE_INT, attr_data);
         ga1.write( PredType::NATIVE_INT, attr_data);
 
diff --git a/c++/test/trefer.cpp b/c++/test/trefer.cpp
index 8a6fb51..b46ae29 100644
--- a/c++/test/trefer.cpp
+++ b/c++/test/trefer.cpp
@@ -476,7 +476,7 @@ static void test_reference_group()
         // Check getting file name given the group dereferenced via constructor
         H5std_string fname = refgroup.getFileName();
         verify_val(fname, FILE1, "H5Group::getFileName",__LINE__,__FILE__);
-    
+
         // Check getting file name given the group dereferenced by ::reference
         fname = group.getFileName();
         verify_val(fname, FILE1, "H5Group::getFileName",__LINE__,__FILE__);
diff --git a/c++/test/ttypes.cpp b/c++/test/ttypes.cpp
index 0de66d7..ae79653 100644
--- a/c++/test/ttypes.cpp
+++ b/c++/test/ttypes.cpp
@@ -54,7 +54,7 @@ using namespace H5;
     H5T_NATIVE_##TYPE##_ALIGN_g=MAX(H5T_NATIVE_##TYPE##_ALIGN_g, VAL)
 #endif
  /* #include "H5Tpkg.h"
- */ 
+ */
 
 const char *FILENAME[] = {
     "dtypes1.h5",
@@ -392,7 +392,7 @@ static void test_vltype()
     try
     {
         VarLenType vltype(PredType::NATIVE_INT);
-        
+
         bool in_class = vltype.detectClass(H5T_VLEN);
         verify_val(in_class, true, "VarLenType::detectClass() with H5T_VLEN", __LINE__, __FILE__);
         in_class = vltype.detectClass(H5T_INTEGER);
diff --git a/config/cmake/ConfigureChecks.cmake b/config/cmake/ConfigureChecks.cmake
index 5a401f7..2930969 100644
--- a/config/cmake/ConfigureChecks.cmake
+++ b/config/cmake/ConfigureChecks.cmake
@@ -172,7 +172,7 @@ option (HDF5_ENABLE_ROS3_VFD "Build the ROS3 Virtual File Driver" OFF)
 endif ()
 
 # ----------------------------------------------------------------------
-# Check whether we can build the Mirror VFD 
+# Check whether we can build the Mirror VFD
 # Header-check flags set in config/cmake_ext_mod/ConfigureChecks.cmake
 # ----------------------------------------------------------------------
 option (HDF5_ENABLE_MIRROR_VFD "Build the Mirror Virtual File Driver" OFF)
diff --git a/config/cmake/PkgInfo.in b/config/cmake/PkgInfo.in
index e530f88..ae54035 100644
--- a/config/cmake/PkgInfo.in
+++ b/config/cmake/PkgInfo.in
@@ -1 +1 @@
-FMWK????
\ No newline at end of file
+FMWK????
diff --git a/config/commence.am b/config/commence.am
index 830c494..41e0f3f 100644
--- a/config/commence.am
+++ b/config/commence.am
@@ -44,15 +44,15 @@ LIBH5CPP_HL=$(top_builddir)/hl/c++/src/libhdf5_hl_cpp.la
 # Install directories that automake doesn't know about
 docdir = $(exec_prefix)/doc
 
-# Note that in svn revision 19400 the '/' after DESTDIR in H5* variables below  
-# has been removed. According to the official description of DESTDIR by Gnu at 
-# http://www.gnu.org/prep/standards/html_node/DESTDIR.html, DESTDIR is 
-# prepended to the normal and complete install path that it precedes for the 
-# purpose of installing in a temporary directory which is useful for building 
-# rpms and other packages.  The '/' after ${DESTDIR} will be followed by another 
-# '/' at the beginning of the normal install path.  When DESTDIR is empty the  
-# path then begins with '//', which is incorrect and causes problems at least for 
-# Cygwin.   
+# Note that in svn revision 19400 the '/' after DESTDIR in H5* variables below
+# has been removed. According to the official description of DESTDIR by Gnu at
+# http://www.gnu.org/prep/standards/html_node/DESTDIR.html, DESTDIR is
+# prepended to the normal and complete install path that it precedes for the
+# purpose of installing in a temporary directory which is useful for building
+# rpms and other packages.  The '/' after ${DESTDIR} will be followed by another
+# '/' at the beginning of the normal install path.  When DESTDIR is empty the
+# path then begins with '//', which is incorrect and causes problems at least for
+# Cygwin.
 
 # Scripts used to build examples
 # If only shared libraries have been installed, have h5cc build examples with
@@ -62,11 +62,11 @@ H5CC_PP=${DESTDIR}$(bindir)/h5pcc
 H5FC=${DESTDIR}$(bindir)/h5fc
 H5FC_PP=${DESTDIR}$(bindir)/h5pfc
 H5CPP=${DESTDIR}$(bindir)/h5c++
-  
+
 
 # H5_CFLAGS holds flags that should be used when building hdf5,
 # but which should not be exported to h5cc for building other programs.
-# AM_CFLAGS is an automake construct which should be used by Makefiles 
+# AM_CFLAGS is an automake construct which should be used by Makefiles
 # instead of CFLAGS, as CFLAGS is reserved solely for the user to define.
 # This applies to FCFLAGS, CXXFLAGS, CPPFLAGS, and LDFLAGS as well.
 
diff --git a/config/conclude.am b/config/conclude.am
index 58c2934..3f05a69 100644
--- a/config/conclude.am
+++ b/config/conclude.am
@@ -25,8 +25,8 @@ LIB = $(lib_LIBRARIES) $(lib_LTLIBRARIES) $(noinst_LIBRARIES)                 \
       $(noinst_LTLIBRARIES) $(check_LIBRARIES) $(check_LTLIBRARIES) $(EXTRA_LIB)
 PROGS = $(bin_PROGRAMS) $(bin_SCRIPTS) $(noinst_PROGRAMS) $(noinst_SCRIPTS)   \
         $(EXTRA_PROG)
-chk_TESTS = $(check_PROGRAMS) $(check_SCRIPTS) $(EXTRA_TEST) 
-TESTS = $(TEST_PROG) $(TEST_SCRIPT) $(EXTRA_TEST) 
+chk_TESTS = $(check_PROGRAMS) $(check_SCRIPTS) $(EXTRA_TEST)
+TESTS = $(TEST_PROG) $(TEST_SCRIPT) $(EXTRA_TEST)
 
 TEST_EXTENSIONS = .sh
 SH_LOG_COMPILER = $(SHELL)
@@ -198,7 +198,7 @@ $(TEST_PROG_CHKEXE) $(TEST_PROG_PARA_CHKEXE) dummy.chkexe_:
               fi; \
 	   fi; \
 	fi
- 
+
 # The dummysh.chkexe here prevents the target from being
 # empty if there are no tests in the current directory.
 # $${log} is the log file.
diff --git a/config/examples.am b/config/examples.am
index 247dfa8..e06f4ea 100644
--- a/config/examples.am
+++ b/config/examples.am
@@ -33,7 +33,7 @@
 ## INSTALL_TOP_FILES
 ##
 ## EXAMPLEDIR
-## The directory into which examples should be installed. 
+## The directory into which examples should be installed.
 ##
 ## Build rules for $(EXTRA_PROG).
 ## Dependencies for example programs.
@@ -62,7 +62,7 @@ install-data-local:
 uninstall-local:
 	@$(MAKE) $(AM_MAKEFLAGS) uninstall-examples
 
-install-examples: $(EXAMPLEDIR) $(INSTALL_FILES) 
+install-examples: $(EXAMPLEDIR) $(INSTALL_FILES)
 	@for f in X $(INSTALL_FILES); do                                     \
 	  if test $$f != X; then                                             \
 	    (set -x; $(INSTALL) $(srcdir)/$$f $(EXAMPLEDIR)/. || exit 1);    \
@@ -109,7 +109,7 @@ installcheck-local:
 	  H5CCFLAGS="-shlib" $(MAKE) $(AM_MAKEFLAGS) check;                \
 	else                                                              \
 	  $(MAKE) $(AM_MAKEFLAGS) check;                                   \
-	fi 
+	fi
 	@if test "$(INSTALL_FILES)" -a $(TEST_EXAMPLES_SCRIPT) -a -d $(EXAMPLEDIR); then \
 	    echo "============================";                                         \
 	    echo "Testing $(TEST_EXAMPLES_SCRIPT)";                                      \
diff --git a/config/toolchain/build32.cmake b/config/toolchain/build32.cmake
index deb5899..207d03e 100644
--- a/config/toolchain/build32.cmake
+++ b/config/toolchain/build32.cmake
@@ -72,4 +72,4 @@ else ()
 # for libraries and headers in the target directories
   set (CMAKE_FIND_ROOT_PATH_MODE_LIBRARY ONLY)
   set (CMAKE_FIND_ROOT_PATH_MODE_INCLUDE ONLY)
-endif ()
\ No newline at end of file
+endif ()
diff --git a/examples/Attributes.txt b/examples/Attributes.txt
index 0f25f68..6cba42b 100644
--- a/examples/Attributes.txt
+++ b/examples/Attributes.txt
@@ -1,4 +1,4 @@
-Attribute Examples: 
+Attribute Examples:
 
 H5Acreate2 example: Show how to create an attribute for a dataset and a group
 ----------------
@@ -19,7 +19,7 @@ H5Acreate2 example: Show how to create an attribute for a dataset and a group
     rank=2;
     dimsf[0] = H5S_UNLIMITED;
     dimsf[1] = H5S_UNLIMITED;
-    dataspace = H5Screate_simple(rank, dimsf, NULL); 
+    dataspace = H5Screate_simple(rank, dimsf, NULL);
 
     /* Create a dataset */
     dataset = H5Dcreate2(file, "Dataset1", H5T_UINT8, dataspace, H5P_DEFAULT, H5P_DEFAULT, H5P_DEFAULT);
@@ -122,7 +122,7 @@ H5Alink Example: Shows how to share an attribute between two datasets.
     /* Get the OID of the attribute */
     attr=H5Aopen(dataset1, "Foo", H5P_DEFAULT);
 
-    /* 
+    /*
      * Create an attribute in the second dataset to the attribute in dataset1,
      * changing the name of the attribute information in dataset2.
      */
diff --git a/examples/Makefile.am b/examples/Makefile.am
index 5b428cd..b7850a7 100644
--- a/examples/Makefile.am
+++ b/examples/Makefile.am
@@ -39,7 +39,7 @@ EXAMPLE_PROG = h5_write h5_read h5_extend_write h5_chunk_read h5_compound \
             h5_ref2reg_deprec h5_extlink h5_elink_unix2win h5_shared_mesg h5_vds h5_vds-exc \
             h5_vds-exclim h5_vds-eiger h5_vds-simpleIO h5_vds-percival \
             h5_vds-percival-unlim h5_vds-percival-unlim-maxmin
-TEST_SCRIPT=testh5cc.sh 
+TEST_SCRIPT=testh5cc.sh
 TEST_EXAMPLES_SCRIPT=$(INSTALL_SCRIPT_FILES)
 
 # Install files
diff --git a/examples/h5_cmprss.c b/examples/h5_cmprss.c
index b51ec44..5feadd3 100644
--- a/examples/h5_cmprss.c
+++ b/examples/h5_cmprss.c
@@ -11,10 +11,10 @@
  * help@hdfgroup.org.                                                        *
  * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * */
 
-/* 
+/*
  *  This example illustrates how to create a compressed dataset.
  *  It is used in the HDF5 Tutorial.
- */ 
+ */
 
 #include "hdf5.h"
 
@@ -22,11 +22,11 @@
 #define RANK    2
 #define DIM0    100
 #define DIM1    20
- 
+
 int main () {
 
     hid_t    file_id, dataset_id, dataspace_id; /* identifiers */
-    hid_t    plist_id; 
+    hid_t    plist_id;
 
     size_t   nelmts;
     unsigned flags, filter_info;
@@ -35,12 +35,12 @@ int main () {
     herr_t   status;
     hsize_t  dims[2];
     hsize_t  cdims[2];
- 
+
     int      i,j, numfilt;
     int      buf[DIM0][DIM1];
     int      rbuf [DIM0][DIM1];
 
-    /* Uncomment these variables to use SZIP compression 
+    /* Uncomment these variables to use SZIP compression
     unsigned szip_options_mask;
     unsigned szip_pixels_per_block;
     */
@@ -62,21 +62,21 @@ int main () {
     status = H5Pset_chunk (plist_id, 2, cdims);
 
     /* Set ZLIB / DEFLATE Compression using compression level 6.
-     * To use SZIP Compression comment out these lines. 
-    */ 
-    status = H5Pset_deflate (plist_id, 6); 
+     * To use SZIP Compression comment out these lines.
+    */
+    status = H5Pset_deflate (plist_id, 6);
 
-    /* Uncomment these lines to set SZIP Compression 
+    /* Uncomment these lines to set SZIP Compression
     szip_options_mask = H5_SZIP_NN_OPTION_MASK;
     szip_pixels_per_block = 16;
     status = H5Pset_szip (plist_id, szip_options_mask, szip_pixels_per_block);
     */
-    
-    dataset_id = H5Dcreate2 (file_id, "Compressed_Data", H5T_STD_I32BE, 
-                            dataspace_id, H5P_DEFAULT, plist_id, H5P_DEFAULT); 
 
-    for (i = 0; i< DIM0; i++) 
-        for (j=0; j<DIM1; j++) 
+    dataset_id = H5Dcreate2 (file_id, "Compressed_Data", H5T_STD_I32BE,
+                            dataspace_id, H5P_DEFAULT, plist_id, H5P_DEFAULT);
+
+    for (i = 0; i< DIM0; i++)
+        for (j=0; j<DIM1; j++)
            buf[i][j] = i+j;
 
     status = H5Dwrite (dataset_id, H5T_NATIVE_INT, H5S_ALL, H5S_ALL, H5P_DEFAULT, buf);
@@ -92,10 +92,10 @@ int main () {
 
     /* Retrieve filter information. */
     plist_id = H5Dget_create_plist (dataset_id);
-    
+
     numfilt = H5Pget_nfilters (plist_id);
     printf ("Number of filters associated with dataset: %i\n", numfilt);
-     
+
     for (i=0; i<numfilt; i++) {
        nelmts = 0;
        filter_type = H5Pget_filter2 (plist_id, 0, &flags, &nelmts, NULL, 0, NULL,
@@ -113,9 +113,9 @@ int main () {
          }
     }
 
-    status = H5Dread (dataset_id, H5T_NATIVE_INT, H5S_ALL, H5S_ALL, 
-                      H5P_DEFAULT, rbuf); 
-    
+    status = H5Dread (dataset_id, H5T_NATIVE_INT, H5S_ALL, H5S_ALL,
+                      H5P_DEFAULT, rbuf);
+
     status = H5Dclose (dataset_id);
     status = H5Pclose (plist_id);
     status = H5Fclose (file_id);
diff --git a/examples/h5_crtatt.c b/examples/h5_crtatt.c
index ade17ba..aa997e7 100644
--- a/examples/h5_crtatt.c
+++ b/examples/h5_crtatt.c
@@ -41,7 +41,7 @@ int main() {
    dataspace_id = H5Screate_simple(1, &dims, NULL);
 
    /* Create a dataset attribute. */
-   attribute_id = H5Acreate2 (dataset_id, "Units", H5T_STD_I32BE, dataspace_id, 
+   attribute_id = H5Acreate2 (dataset_id, "Units", H5T_STD_I32BE, dataspace_id,
                              H5P_DEFAULT, H5P_DEFAULT);
 
    /* Write the attribute data. */
diff --git a/examples/h5_crtdat.c b/examples/h5_crtdat.c
index 4a876d2..9fcb186 100644
--- a/examples/h5_crtdat.c
+++ b/examples/h5_crtdat.c
@@ -12,7 +12,7 @@
  * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * */
 
 /*
- *  This example illustrates how to create a dataset that is a 4 x 6 
+ *  This example illustrates how to create a dataset that is a 4 x 6
  *  array.  It is used in the HDF5 Tutorial.
  */
 
@@ -29,18 +29,18 @@ int main() {
    file_id = H5Fcreate(FILE, H5F_ACC_TRUNC, H5P_DEFAULT, H5P_DEFAULT);
 
    /* Create the data space for the dataset. */
-   dims[0] = 4; 
-   dims[1] = 6; 
+   dims[0] = 4;
+   dims[1] = 6;
    dataspace_id = H5Screate_simple(2, dims, NULL);
 
    /* Create the dataset. */
-   dataset_id = H5Dcreate2(file_id, "/dset", H5T_STD_I32BE, dataspace_id, 
+   dataset_id = H5Dcreate2(file_id, "/dset", H5T_STD_I32BE, dataspace_id,
                           H5P_DEFAULT, H5P_DEFAULT, H5P_DEFAULT);
 
    /* End access to the dataset and release resources used by it. */
    status = H5Dclose(dataset_id);
 
-   /* Terminate access to the data space. */ 
+   /* Terminate access to the data space. */
    status = H5Sclose(dataspace_id);
 
    /* Close the file. */
diff --git a/examples/h5_crtgrp.c b/examples/h5_crtgrp.c
index 89bddce..1b110c2 100644
--- a/examples/h5_crtgrp.c
+++ b/examples/h5_crtgrp.c
@@ -12,7 +12,7 @@
  * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * */
 
 /*
- *  This example illustrates how to create and close a group. 
+ *  This example illustrates how to create and close a group.
  *  It is used in the HDF5 Tutorial.
  */
 
diff --git a/examples/h5_crtgrpar.c b/examples/h5_crtgrpar.c
index 6f8c6e8..21a37c5 100644
--- a/examples/h5_crtgrpar.c
+++ b/examples/h5_crtgrpar.c
@@ -12,7 +12,7 @@
  * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * */
 
 /*
- *  This example illustrates the creation of groups using absolute and 
+ *  This example illustrates the creation of groups using absolute and
  *  relative names.  It is used in the HDF5 Tutorial.
  */
 
diff --git a/examples/h5_crtgrpd.c b/examples/h5_crtgrpd.c
index 35c4389..d0d535b 100644
--- a/examples/h5_crtgrpd.c
+++ b/examples/h5_crtgrpd.c
@@ -67,7 +67,7 @@ int main() {
    dataspace_id = H5Screate_simple(2, dims, NULL);
 
    /* Create the second dataset in group "Group_A". */
-   dataset_id = H5Dcreate2(group_id, "dset2", H5T_STD_I32BE, dataspace_id, 
+   dataset_id = H5Dcreate2(group_id, "dset2", H5T_STD_I32BE, dataspace_id,
                           H5P_DEFAULT, H5P_DEFAULT, H5P_DEFAULT);
 
    /* Write the second dataset. */
diff --git a/examples/h5_extend.c b/examples/h5_extend.c
index 6e3cff2..6018e65 100644
--- a/examples/h5_extend.c
+++ b/examples/h5_extend.c
@@ -12,9 +12,9 @@
  * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * */
 
 /*
- *  This example how to work with extendible datasets. The dataset 
+ *  This example how to work with extendible datasets. The dataset
  *  must be chunked in order to be extendible.
- * 
+ *
  *  It is used in the HDF5 Tutorial.
  */
 
@@ -29,28 +29,28 @@ int
 main (void)
 {
     hid_t        file;                          /* handles */
-    hid_t        dataspace, dataset;  
+    hid_t        dataspace, dataset;
     hid_t        filespace, memspace;
-    hid_t        prop;                     
+    hid_t        prop;
 
-    hsize_t      dims[2]  = {3, 3};           /* dataset dimensions at creation time */		
+    hsize_t      dims[2]  = {3, 3};           /* dataset dimensions at creation time */
     hsize_t      maxdims[2] = {H5S_UNLIMITED, H5S_UNLIMITED};
-    herr_t       status;                             
+    herr_t       status;
     hsize_t      chunk_dims[2] = {2, 5};
     int          data[3][3] = { {1, 1, 1},    /* data to write */
                                 {1, 1, 1},
-                                {1, 1, 1} };      
+                                {1, 1, 1} };
 
     /* Variables used in extending and writing to the extended portion of dataset */
     hsize_t      size[2];
     hsize_t      offset[2];
     hsize_t      dimsext[2] = {7, 3};         /* extend dimensions */
-    int          dataext[7][3] = { {2, 3, 4}, 
-                                   {2, 3, 4}, 
-                                   {2, 3, 4}, 
-                                   {2, 3, 4}, 
-                                   {2, 3, 4}, 
-                                   {2, 3, 4}, 
+    int          dataext[7][3] = { {2, 3, 4},
+                                   {2, 3, 4},
+                                   {2, 3, 4},
+                                   {2, 3, 4},
+                                   {2, 3, 4},
+                                   {2, 3, 4},
                                    {2, 3, 4} };
 
     /* Variables used in reading data back */
@@ -58,11 +58,11 @@ main (void)
     hsize_t      dimsr[2];
     hsize_t      i, j;
     int          rdata[10][3];
-    herr_t       status_n;                             
+    herr_t       status_n;
     int          rank, rank_chunk;
 
     /* Create the data space with unlimited dimensions. */
-    dataspace = H5Screate_simple (RANK, dims, maxdims); 
+    dataspace = H5Screate_simple (RANK, dims, maxdims);
 
     /* Create a new file. If file exists its contents will be overwritten. */
     file = H5Fcreate (FILENAME, H5F_ACC_TRUNC, H5P_DEFAULT, H5P_DEFAULT);
@@ -71,7 +71,7 @@ main (void)
     prop = H5Pcreate (H5P_DATASET_CREATE);
     status = H5Pset_chunk (prop, RANK, chunk_dims);
 
-    /* Create a new dataset within the file using chunk 
+    /* Create a new dataset within the file using chunk
        creation properties.  */
     dataset = H5Dcreate2 (file, DATASETNAME, H5T_NATIVE_INT, dataspace,
                          H5P_DEFAULT, prop, H5P_DEFAULT);
@@ -90,10 +90,10 @@ main (void)
     offset[0] = 3;
     offset[1] = 0;
     status = H5Sselect_hyperslab (filespace, H5S_SELECT_SET, offset, NULL,
-                                  dimsext, NULL);  
+                                  dimsext, NULL);
 
     /* Define memory space */
-    memspace = H5Screate_simple (RANK, dimsext, NULL); 
+    memspace = H5Screate_simple (RANK, dimsext, NULL);
 
     /* Write the data to the extended portion of dataset  */
     status = H5Dwrite (dataset, H5T_NATIVE_INT, memspace, filespace,
@@ -120,7 +120,7 @@ main (void)
 
     prop = H5Dget_create_plist (dataset);
 
-    if (H5D_CHUNKED == H5Pget_layout (prop)) 
+    if (H5D_CHUNKED == H5Pget_layout (prop))
        rank_chunk = H5Pget_chunk (prop, rank, chunk_dimsr);
 
     memspace = H5Screate_simple (rank, dimsr, NULL);
diff --git a/examples/h5_rdwt.c b/examples/h5_rdwt.c
index 6cd7f0f..f7196c0 100644
--- a/examples/h5_rdwt.c
+++ b/examples/h5_rdwt.c
@@ -11,7 +11,7 @@
  * help@hdfgroup.org.                                                        *
  * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * */
 
-/* 
+/*
  *  This example illustrates how to write and read data in an existing
  *  dataset.  It is used in the HDF5 Tutorial.
  */
@@ -37,10 +37,10 @@ int main() {
    dataset_id = H5Dopen2(file_id, "/dset", H5P_DEFAULT);
 
    /* Write the dataset. */
-   status = H5Dwrite(dataset_id, H5T_NATIVE_INT, H5S_ALL, H5S_ALL, H5P_DEFAULT, 
+   status = H5Dwrite(dataset_id, H5T_NATIVE_INT, H5S_ALL, H5S_ALL, H5P_DEFAULT,
                      dset_data);
 
-   status = H5Dread(dataset_id, H5T_NATIVE_INT, H5S_ALL, H5S_ALL, H5P_DEFAULT, 
+   status = H5Dread(dataset_id, H5T_NATIVE_INT, H5S_ALL, H5S_ALL, H5P_DEFAULT,
                     dset_data);
 
    /* Close the dataset. */
diff --git a/examples/h5_ref_extern.c b/examples/h5_ref_extern.c
index 17082ba..5403814 100644
--- a/examples/h5_ref_extern.c
+++ b/examples/h5_ref_extern.c
@@ -14,7 +14,7 @@
   * The example below illustrates the use of the new API with files that are
   * opened read-only. Created references to the objects in that file are
   * stored into a separate file, and accessed from that file, without the user
-  * explicitly opening the original file that was referenced. 
+  * explicitly opening the original file that was referenced.
   */
 
 #include <stdlib.h>
diff --git a/examples/h5_subset.c b/examples/h5_subset.c
index 904d3f8..ad2eaba 100644
--- a/examples/h5_subset.c
+++ b/examples/h5_subset.c
@@ -11,44 +11,44 @@
  * help@hdfgroup.org.                                                        *
  * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * */
 
-/* 
- *  This example illustrates how to read/write a subset of data (a slab) 
+/*
+ *  This example illustrates how to read/write a subset of data (a slab)
  *  from/to a dataset in an HDF5 file.  It is used in the HDF5 Tutorial.
  */
- 
+
 #include "hdf5.h"
 
 #define FILE        "subset.h5"
-#define DATASETNAME "IntArray" 
+#define DATASETNAME "IntArray"
 #define RANK  2
 
-#define DIM0_SUB  3                         /* subset dimensions */ 
-#define DIM1_SUB  4 
+#define DIM0_SUB  3                         /* subset dimensions */
+#define DIM1_SUB  4
 
 
-#define DIM0     8                          /* size of dataset */       
-#define DIM1     10 
+#define DIM0     8                          /* size of dataset */
+#define DIM1     10
 
 int
 main (void)
 {
-    hsize_t     dims[2], dimsm[2];   
+    hsize_t     dims[2], dimsm[2];
     int         data[DIM0][DIM1];           /* data to write */
     int         sdata[DIM0_SUB][DIM1_SUB];  /* subset to write */
     int         rdata[DIM0][DIM1];          /* buffer for read */
- 
+
     hid_t       file_id, dataset_id;        /* handles */
-    hid_t       dataspace_id, memspace_id; 
+    hid_t       dataspace_id, memspace_id;
+
+    herr_t      status;
 
-    herr_t      status;                             
-   
     hsize_t     count[2];              /* size of subset in the file */
     hsize_t     offset[2];             /* subset offset in the file */
     hsize_t     stride[2];
     hsize_t     block[2];
     int         i, j;
 
-    
+
     /*****************************************************************
      * Create a new file with default creation and access properties.*
      * Then create a dataset and write data to it and close the file *
@@ -59,7 +59,7 @@ main (void)
 
     dims[0] = DIM0;
     dims[1] = DIM1;
-    dataspace_id = H5Screate_simple (RANK, dims, NULL); 
+    dataspace_id = H5Screate_simple (RANK, dims, NULL);
 
     dataset_id = H5Dcreate2 (file_id, DATASETNAME, H5T_STD_I32BE, dataspace_id,
                             H5P_DEFAULT, H5P_DEFAULT, H5P_DEFAULT);
@@ -71,7 +71,7 @@ main (void)
 	       data[j][i] = 1;
             else
                data[j][i] = 2;
-    }     
+    }
 
     status = H5Dwrite (dataset_id, H5T_NATIVE_INT, H5S_ALL, H5S_ALL,
                       H5P_DEFAULT, data);
@@ -89,7 +89,7 @@ main (void)
 
     /*****************************************************
      * Reopen the file and dataset and write a subset of *
-     * values to the dataset. 
+     * values to the dataset.
      *****************************************************/
 
     file_id = H5Fopen (FILE, H5F_ACC_RDWR, H5P_DEFAULT);
@@ -100,7 +100,7 @@ main (void)
     offset[0] = 1;
     offset[1] = 2;
 
-    count[0]  = DIM0_SUB;  
+    count[0]  = DIM0_SUB;
     count[1]  = DIM1_SUB;
 
     stride[0] = 1;
@@ -109,18 +109,18 @@ main (void)
     block[0] = 1;
     block[1] = 1;
 
-    /* Create memory space with size of subset. Get file dataspace 
+    /* Create memory space with size of subset. Get file dataspace
        and select subset from file dataspace. */
 
     dimsm[0] = DIM0_SUB;
     dimsm[1] = DIM1_SUB;
-    memspace_id = H5Screate_simple (RANK, dimsm, NULL); 
+    memspace_id = H5Screate_simple (RANK, dimsm, NULL);
 
     dataspace_id = H5Dget_space (dataset_id);
     status = H5Sselect_hyperslab (dataspace_id, H5S_SELECT_SET, offset,
                                   stride, count, block);
 
-    /* Write a subset of data to the dataset, then read the 
+    /* Write a subset of data to the dataset, then read the
        entire dataset back from the file.  */
 
     printf ("\nWrite subset to file specifying:\n");
@@ -128,11 +128,11 @@ main (void)
     for (j = 0; j < DIM0_SUB; j++) {
 	for (i = 0; i < DIM1_SUB; i++)
 	   sdata[j][i] = 5;
-    }     
+    }
 
     status = H5Dwrite (dataset_id, H5T_NATIVE_INT, memspace_id,
                        dataspace_id, H5P_DEFAULT, sdata);
-    
+
     status = H5Dread (dataset_id, H5T_NATIVE_INT, H5S_ALL, H5S_ALL,
                        H5P_DEFAULT, rdata);
 
@@ -147,5 +147,5 @@ main (void)
     status = H5Sclose (dataspace_id);
     status = H5Dclose (dataset_id);
     status = H5Fclose (file_id);
- 
+
 }
diff --git a/examples/h5_vds-eiger.c b/examples/h5_vds-eiger.c
index 13b5d93..a02f4f8 100644
--- a/examples/h5_vds-eiger.c
+++ b/examples/h5_vds-eiger.c
@@ -12,7 +12,7 @@
 /************************************************************
 
   This example illustrates the concept of the virtual dataset.
-  Eiger use case. Every 5 frames 10x10 are in the source 
+  Eiger use case. Every 5 frames 10x10 are in the source
   dataset "/A" in file with the name f-<#>.h5
   This file is intended for use with HDF5 Library version 1.10
 
@@ -25,13 +25,13 @@
 
 #define FILE         "vds-eiger.h5"
 #define DATASET      "VDS-Eiger"
-#define VDSDIM0       5 
-#define VDSDIM1       10 
-#define VDSDIM2       10 
-#define DIM0          5 
-#define DIM1          10 
-#define DIM2          10 
-#define RANK          3 
+#define VDSDIM0       5
+#define VDSDIM1       10
+#define VDSDIM2       10
+#define DIM0          5
+#define DIM1          10
+#define DIM2          10
+#define RANK          3
 
 int
 main (void)
@@ -69,7 +69,7 @@ main (void)
 
     /* Create VDS creation property */
     dcpl = H5Pcreate (H5P_DATASET_CREATE);
-     
+
     /* Initialize hyperslab values */
 
     start[0] = 0;
@@ -85,13 +85,13 @@ main (void)
     block[1] = DIM1;
     block[2] = DIM2;
 
-   /* 
-    * Build the mappings 
+   /*
+    * Build the mappings
     *
     */
       status = H5Sselect_hyperslab (vspace, H5S_SELECT_SET, start, stride, count, block);
       status = H5Pset_virtual (dcpl, vspace, "f-%b.h5", "/A", src_space);
-   
+
 
 
    /* Create a virtual dataset */
@@ -100,8 +100,8 @@ main (void)
       status = H5Sclose (vspace);
       status = H5Sclose (src_space);
       status = H5Dclose (dset);
-      status = H5Fclose (file);    
-     
+      status = H5Fclose (file);
+
 
     /*
      * Now we begin the read section of this example.
@@ -123,7 +123,7 @@ main (void)
      */
     layout = H5Pget_layout (dcpl);
 
-    if (H5D_VIRTUAL == layout) 
+    if (H5D_VIRTUAL == layout)
         printf(" Dataset has a virtual layout \n");
     else
         printf(" Wrong layout found \n");
@@ -134,15 +134,15 @@ main (void)
      status = H5Pget_virtual_count (dcpl, &num_map);
      printf(" Number of mappings is %d\n", (int)num_map);
 
-     /* 
+     /*
       * Get mapping parameters for each mapping.
       */
-      for (i = 0; i < (int)num_map; i++) {   
+      for (i = 0; i < (int)num_map; i++) {
       printf(" Mapping %d \n", i);
       printf("         Selection in the virtual dataset \n");
       /* Get selection in the virttual  dataset */
           vspace = H5Pget_virtual_vspace (dcpl, (size_t)i);
-          if (H5Sget_select_type(vspace) == H5S_SEL_HYPERSLABS) { 
+          if (H5Sget_select_type(vspace) == H5S_SEL_HYPERSLABS) {
               if (H5Sis_regular_hyperslab(vspace)) {
                    status = H5Sget_regular_hyperslab (vspace, start_out, stride_out, count_out, block_out);
                    printf("         start  = [%llu, %llu, %llu] \n", (unsigned long long)start_out[0], (unsigned long long)start_out[1], (unsigned long long)start_out[2]);
diff --git a/examples/h5_vds-exc.c b/examples/h5_vds-exc.c
index aaf1fa8..b113c36 100644
--- a/examples/h5_vds-exc.c
+++ b/examples/h5_vds-exc.c
@@ -24,16 +24,16 @@
 
 #define FILE         "vds-exc.h5"
 #define DATASET      "VDS-Excalibur"
-#define VDSDIM0         0 
-#define VDSDIM1         15 
-#define VDSDIM2         6 
-#define KDIM0           0 
-#define KDIM1           2 
-#define KDIM2           6 
-#define NDIM0           0 
-#define NDIM1           3 
-#define NDIM2           6 
-#define RANK            3 
+#define VDSDIM0         0
+#define VDSDIM1         15
+#define VDSDIM2         6
+#define KDIM0           0
+#define KDIM1           2
+#define KDIM2           6
+#define NDIM0           0
+#define NDIM1           3
+#define NDIM2           6
+#define RANK            3
 
 const char *SRC_FILE[] = {
     "a.h5",
@@ -96,7 +96,7 @@ main (void)
 
     /* Create VDS creation property */
     dcpl = H5Pcreate (H5P_DATASET_CREATE);
-     
+
     /* Initialize hyperslab values */
 
     start[0] = 0;
@@ -109,7 +109,7 @@ main (void)
     block[1] = k;
     block[2] = VDSDIM2;
 
-   /* 
+   /*
     * Build the mappings for A, C and E source datasets.
     * Unlimited hyperslab selection is the same in the source datasets.
     * Unlimited hyperslab selections in the virtual dataset have different offsets.
@@ -124,7 +124,7 @@ main (void)
    /* Reinitialize start[1] and block[1] to build the second set of mappings. */
    start[1] = 0;
    block[1] = n;
-   /* 
+   /*
     * Build the mappings for B, D and F source datasets.
     * Unlimited hyperslab selection is the same in the source datasets.
     * Unlimited hyperslab selections in the virtual dataset have different offsets.
@@ -143,8 +143,8 @@ main (void)
       status = H5Sclose (nsrc_space);
       status = H5Sclose (ksrc_space);
       status = H5Dclose (dset);
-      status = H5Fclose (file);    
-     
+      status = H5Fclose (file);
+
 
     /*
      * Now we begin the read section of this example.
@@ -166,7 +166,7 @@ main (void)
      */
     layout = H5Pget_layout (dcpl);
 
-    if (H5D_VIRTUAL == layout) 
+    if (H5D_VIRTUAL == layout)
         printf(" Dataset has a virtual layout \n");
     else
         printf("Wrong layout found \n");
@@ -177,15 +177,15 @@ main (void)
      status = H5Pget_virtual_count (dcpl, &num_map);
      printf(" Number of mappings is %lu\n", (unsigned long)num_map);
 
-     /* 
+     /*
       * Get mapping parameters for each mapping.
       */
-      for (i = 0; i < (int)num_map; i++) {   
+      for (i = 0; i < (int)num_map; i++) {
       printf(" Mapping %d \n", i);
       printf("         Selection in the virtual dataset \n");
       /* Get selection in the virttual  dataset */
           vspace = H5Pget_virtual_vspace (dcpl, (size_t)i);
-          if (H5Sget_select_type(vspace) == H5S_SEL_HYPERSLABS) { 
+          if (H5Sget_select_type(vspace) == H5S_SEL_HYPERSLABS) {
               if (H5Sis_regular_hyperslab(vspace)) {
                    status = H5Sget_regular_hyperslab (vspace, start_out, stride_out, count_out, block_out);
                    printf("         start  = [%llu, %llu, %llu] \n", (unsigned long long)start_out[0], (unsigned long long)start_out[1], (unsigned long long)start_out[2]);
@@ -209,7 +209,7 @@ main (void)
       /* Get selection in the source dataset */
           printf("         Selection in the source dataset \n");
           src_space = H5Pget_virtual_srcspace (dcpl, (size_t)i);
-          if (H5Sget_select_type(src_space) == H5S_SEL_HYPERSLABS) { 
+          if (H5Sget_select_type(src_space) == H5S_SEL_HYPERSLABS) {
               if (H5Sis_regular_hyperslab(vspace)) {
                    status = H5Sget_regular_hyperslab (src_space, start_out, stride_out, count_out, block_out);
                    printf("         start  = [%llu, %llu, %llu] \n", (unsigned long long)start_out[0], (unsigned long long)start_out[1], (unsigned long long)start_out[2]);
diff --git a/examples/h5_vds-exclim.c b/examples/h5_vds-exclim.c
index fea096a..152731c 100644
--- a/examples/h5_vds-exclim.c
+++ b/examples/h5_vds-exclim.c
@@ -25,16 +25,16 @@
 
 #define FILE         "vds-exclim.h5"
 #define DATASET      "VDS-Excaliburlim"
-#define VDSDIM0         3 
-#define VDSDIM1         15 
-#define VDSDIM2         6 
-#define KDIM0           3 
-#define KDIM1           2 
-#define KDIM2           6 
-#define NDIM0           3 
-#define NDIM1           3 
-#define NDIM2           6 
-#define RANK            3 
+#define VDSDIM0         3
+#define VDSDIM1         15
+#define VDSDIM2         6
+#define KDIM0           3
+#define KDIM1           2
+#define KDIM2           6
+#define NDIM0           3
+#define NDIM1           3
+#define NDIM2           6
+#define RANK            3
 
 const char *SRC_FILE[] = {
     "a.h5",
@@ -94,7 +94,7 @@ main (void)
 
     /* Create VDS creation property */
     dcpl = H5Pcreate (H5P_DATASET_CREATE);
-     
+
     /* Initialize hyperslab values */
 
     start[0] = 0;
@@ -107,7 +107,7 @@ main (void)
     block[1] = k;
     block[2] = VDSDIM2;
 
-   /* 
+   /*
     * Build the mappings for A, C and E source datasets.
     *
     */
@@ -121,7 +121,7 @@ main (void)
    /* Reinitialize start[0] and block[1] */
    start[0] = 0;
    block[1] = n;
-   /* 
+   /*
     * Build the mappings for B, D and F source datasets.
     *
     */
@@ -139,8 +139,8 @@ main (void)
       status = H5Sclose (nsrc_space);
       status = H5Sclose (ksrc_space);
       status = H5Dclose (dset);
-      status = H5Fclose (file);    
-     
+      status = H5Fclose (file);
+
 
     /*
      * Now we begin the read section of this example.
@@ -162,7 +162,7 @@ main (void)
      */
     layout = H5Pget_layout (dcpl);
 
-    if (H5D_VIRTUAL == layout) 
+    if (H5D_VIRTUAL == layout)
         printf(" Dataset has a virtual layout \n");
     else
         printf("Wrong layout found \n");
@@ -173,15 +173,15 @@ main (void)
      status = H5Pget_virtual_count (dcpl, &num_map);
      printf(" Number of mappings is %lu\n", (unsigned long)num_map);
 
-     /* 
+     /*
       * Get mapping parameters for each mapping.
       */
-      for (i = 0; i < (int)num_map; i++) {   
+      for (i = 0; i < (int)num_map; i++) {
       printf(" Mapping %d \n", i);
       printf("         Selection in the virtual dataset \n");
       /* Get selection in the virttual  dataset */
           vspace = H5Pget_virtual_vspace (dcpl, (size_t)i);
-          if (H5Sget_select_type(vspace) == H5S_SEL_HYPERSLABS) { 
+          if (H5Sget_select_type(vspace) == H5S_SEL_HYPERSLABS) {
               if (H5Sis_regular_hyperslab(vspace)) {
                    status = H5Sget_regular_hyperslab (vspace, start_out, stride_out, count_out, block_out);
                    printf("         start  = [%llu, %llu, %llu] \n", (unsigned long long)start_out[0], (unsigned long long)start_out[1], (unsigned long long)start_out[2]);
diff --git a/examples/h5_vds-percival-unlim-maxmin.c b/examples/h5_vds-percival-unlim-maxmin.c
index 0273bbc..7b0d532 100644
--- a/examples/h5_vds-percival-unlim-maxmin.c
+++ b/examples/h5_vds-percival-unlim-maxmin.c
@@ -12,8 +12,8 @@
 /************************************************************
 
   This example illustrates the concept of the virtual dataset.
-  Percival use case. Every fifth 10x10 plane in VDS is stored in 
-  the corresponding 3D unlimited dataset. 
+  Percival use case. Every fifth 10x10 plane in VDS is stored in
+  the corresponding 3D unlimited dataset.
   There are 4 source datasets total.
   Each of the source datasets is extended to different sizes.
   VDS access property can be used to get max and min extent.
@@ -28,15 +28,15 @@
 
 #define VFILE        "vds-percival-unlim-maxmin.h5"
 #define DATASET      "VDS-Percival-unlim-maxmin"
-#define VDSDIM0       H5S_UNLIMITED 
-#define VDSDIM1       10 
-#define VDSDIM2       10 
+#define VDSDIM0       H5S_UNLIMITED
+#define VDSDIM1       10
+#define VDSDIM2       10
 
-#define DIM0          H5S_UNLIMITED 
+#define DIM0          H5S_UNLIMITED
 #define DIM0_1        4  /* Initial size of the source datasets */
-#define DIM1          10 
-#define DIM2          10 
-#define RANK          3 
+#define DIM1          10
+#define DIM2          10
+#define RANK          3
 #define PLANE_STRIDE  4
 
 const char *SRC_FILE[] = {
@@ -61,7 +61,7 @@ main (void)
     hid_t        dcpl, dapl;
     herr_t       status;
     hsize_t      vdsdims[3] = {4*DIM0_1, VDSDIM1, VDSDIM2},
-                 vdsdims_max[3] = {VDSDIM0, VDSDIM1, VDSDIM2}, 
+                 vdsdims_max[3] = {VDSDIM0, VDSDIM1, VDSDIM2},
                  dims[3] = {DIM0_1, DIM1, DIM2},
                  memdims[3] = {DIM0_1, DIM1, DIM2},
                  extdims[3] = {0, DIM1, DIM2}, /* Dimensions of the extended source datasets */
@@ -96,7 +96,7 @@ main (void)
         for (j = 0; j < DIM0_1*DIM1*DIM2; j++) wdata[j] = i+1;
 
         /*
-         * Create the source files and  datasets. Write data to each dataset and 
+         * Create the source files and  datasets. Write data to each dataset and
          * close all resources.
          */
 
@@ -112,7 +112,7 @@ main (void)
         status = H5Pclose (dcpl);
         status = H5Dclose (dset);
         status = H5Fclose (file);
-    }    
+    }
 
     vfile = H5Fcreate (VFILE, H5F_ACC_TRUNC, H5P_DEFAULT, H5P_DEFAULT);
 
@@ -124,7 +124,7 @@ main (void)
 
     /* Create VDS creation property */
     dcpl = H5Pcreate (H5P_DATASET_CREATE);
-     
+
     /* Initialize hyperslab values */
 
     start[0] = 0;
@@ -143,18 +143,18 @@ main (void)
     block[1] = DIM1;
     block[2] = DIM2;
 
-    /* 
-     * Build the mappings 
+    /*
+     * Build the mappings
      *
      */
     status = H5Sselect_hyperslab (src_space, H5S_SELECT_SET, start, NULL, src_count, block);
     for (i=0; i < PLANE_STRIDE; i++) {
         status = H5Sselect_hyperslab (vspace, H5S_SELECT_SET, start, stride, count, block);
         status = H5Pset_virtual (dcpl, vspace, SRC_FILE[i], SRC_DATASET[i], src_space);
-        start[0]++; 
-    } 
+        start[0]++;
+    }
 
-    H5Sselect_none(vspace); 
+    H5Sselect_none(vspace);
 
     /* Create a virtual dataset */
     vdset = H5Dcreate2 (vfile, DATASET, H5T_NATIVE_INT, vspace, H5P_DEFAULT,
@@ -174,14 +174,14 @@ main (void)
         for (j = 0; j < (i+1)*DIM1*DIM2; j++) wdata[j] = 10*(i+1);
 
         /*
-         * Open the source files and datasets. Appen data to each dataset and 
+         * Open the source files and datasets. Appen data to each dataset and
          * close all resources.
          */
 
         file = H5Fopen (SRC_FILE[i], H5F_ACC_RDWR, H5P_DEFAULT);
         dset = H5Dopen2 (file, SRC_DATASET[i], H5P_DEFAULT);
         extdims[0] = DIM0_1+i+1;
-        status = H5Dset_extent (dset, extdims);       
+        status = H5Dset_extent (dset, extdims);
         src_space = H5Dget_space (dset);
         start[0] = DIM0_1;
         start[1] = 0;
@@ -194,7 +194,7 @@ main (void)
         block[2] = DIM2;
 
         memdims[0] = i+1;
-        mem_space = H5Screate_simple(RANK, memdims, NULL); 
+        mem_space = H5Screate_simple(RANK, memdims, NULL);
         status = H5Sselect_hyperslab (src_space, H5S_SELECT_SET, start, NULL, count, block);
         status = H5Dwrite (dset, H5T_NATIVE_INT, mem_space, src_space, H5P_DEFAULT,
                     wdata);
@@ -204,8 +204,8 @@ main (void)
       }
 
     status = H5Dclose (vdset);
-    status = H5Fclose (vfile);    
-     
+    status = H5Fclose (vfile);
+
     /*
      * Now we begin the read section of this example.
      */
@@ -214,8 +214,8 @@ main (void)
      * Open file and dataset using the default properties.
      */
     vfile = H5Fopen (VFILE, H5F_ACC_RDONLY, H5P_DEFAULT);
-    
-    /* 
+
+    /*
      * Open VDS using different access properties to use max or
      * min extents depending on the sizes of the underlying datasets
      */
@@ -252,7 +252,7 @@ main (void)
      */
     layout = H5Pget_layout (dcpl);
 
-    if (H5D_VIRTUAL == layout) 
+    if (H5D_VIRTUAL == layout)
         printf(" Dataset has a virtual layout \n");
     else
         printf(" Wrong layout found \n");
@@ -263,15 +263,15 @@ main (void)
      status = H5Pget_virtual_count (dcpl, &num_map);
      printf(" Number of mappings is %lu\n", (unsigned long)num_map);
 
-     /* 
+     /*
       * Get mapping parameters for each mapping.
       */
-      for (i = 0; i < (int)num_map; i++) {   
+      for (i = 0; i < (int)num_map; i++) {
       printf(" Mapping %d \n", i);
       printf("         Selection in the virtual dataset \n");
       /* Get selection in the virttual  dataset */
           vspace = H5Pget_virtual_vspace (dcpl, (size_t)i);
-          if (H5Sget_select_type(vspace) == H5S_SEL_HYPERSLABS) { 
+          if (H5Sget_select_type(vspace) == H5S_SEL_HYPERSLABS) {
               if (H5Sis_regular_hyperslab(vspace)) {
                    status = H5Sget_regular_hyperslab (vspace, start_out, stride_out, count_out, block_out);
                    printf("         start  = [%llu, %llu, %llu] \n", (unsigned long long)start_out[0], (unsigned long long)start_out[1], (unsigned long long)start_out[2]);
diff --git a/examples/h5_vds-percival-unlim.c b/examples/h5_vds-percival-unlim.c
index f6a5f50..0823f40 100644
--- a/examples/h5_vds-percival-unlim.c
+++ b/examples/h5_vds-percival-unlim.c
@@ -12,8 +12,8 @@
 /************************************************************
 
   This example illustrates the concept of the virtual dataset.
-  Percival use case. Every fifth 10x10 plane in VDS is stored in 
-  the corresponding 3D unlimited dataset. 
+  Percival use case. Every fifth 10x10 plane in VDS is stored in
+  the corresponding 3D unlimited dataset.
   There are 4 source datasets total.
   This file is intended for use with HDF5 Library version 1.10
 
@@ -26,15 +26,15 @@
 
 #define VFILE        "vds-percival-unlim.h5"
 #define DATASET      "VDS-Percival-unlim"
-#define VDSDIM0       H5S_UNLIMITED 
-#define VDSDIM1       10 
-#define VDSDIM2       10 
+#define VDSDIM0       H5S_UNLIMITED
+#define VDSDIM1       10
+#define VDSDIM2       10
 
-#define DIM0          H5S_UNLIMITED 
+#define DIM0          H5S_UNLIMITED
 #define DIM0_1        10  /* Initial size of the datasets */
-#define DIM1          10 
-#define DIM2          10 
-#define RANK          3 
+#define DIM1          10
+#define DIM2          10
+#define RANK          3
 #define PLANE_STRIDE  4
 
 const char *SRC_FILE[] = {
@@ -59,7 +59,7 @@ main (void)
     hid_t        dcpl;
     herr_t       status;
     hsize_t      vdsdims[3] = {4*DIM0_1, VDSDIM1, VDSDIM2},
-                 vdsdims_max[3] = {VDSDIM0, VDSDIM1, VDSDIM2}, 
+                 vdsdims_max[3] = {VDSDIM0, VDSDIM1, VDSDIM2},
                  dims[3] = {DIM0_1, DIM1, DIM2},
                  extdims[3] = {2*DIM0_1, DIM1, DIM2},
                  chunk_dims[3] = {DIM0_1, DIM1, DIM2},
@@ -95,7 +95,7 @@ main (void)
         for (j = 0; j < DIM0_1*DIM1*DIM2; j++) wdata[j] = i+1;
 
         /*
-         * Create the source files and  datasets. Write data to each dataset and 
+         * Create the source files and  datasets. Write data to each dataset and
          * close all resources.
          */
 
@@ -111,7 +111,7 @@ main (void)
         status = H5Pclose (dcpl);
         status = H5Dclose (dset);
         status = H5Fclose (file);
-    }    
+    }
 
     vfile = H5Fcreate (VFILE, H5F_ACC_TRUNC, H5P_DEFAULT, H5P_DEFAULT);
 
@@ -123,7 +123,7 @@ main (void)
 
     /* Create VDS creation property */
     dcpl = H5Pcreate (H5P_DATASET_CREATE);
-     
+
     /* Initialize hyperslab values */
 
     start[0] = 0;
@@ -142,18 +142,18 @@ main (void)
     block[1] = DIM1;
     block[2] = DIM2;
 
-    /* 
-     * Build the mappings 
+    /*
+     * Build the mappings
      *
      */
     status = H5Sselect_hyperslab (src_space, H5S_SELECT_SET, start, NULL, src_count, block);
     for (i=0; i < PLANE_STRIDE; i++) {
         status = H5Sselect_hyperslab (vspace, H5S_SELECT_SET, start, stride, count, block);
         status = H5Pset_virtual (dcpl, vspace, SRC_FILE[i], SRC_DATASET[i], src_space);
-        start[0]++; 
-    } 
+        start[0]++;
+    }
 
-    H5Sselect_none(vspace); 
+    H5Sselect_none(vspace);
 
     /* Create a virtual dataset */
     vdset = H5Dcreate2 (vfile, DATASET, H5T_NATIVE_INT, vspace, H5P_DEFAULT,
@@ -179,13 +179,13 @@ main (void)
         for (j = 0; j < DIM0_1*DIM1*DIM2; j++) wdata[j] = 10*(i+1);
 
         /*
-         * Create the source files and  datasets. Write data to each dataset and 
+         * Create the source files and  datasets. Write data to each dataset and
          * close all resources.
          */
 
         file = H5Fopen (SRC_FILE[i], H5F_ACC_RDWR, H5P_DEFAULT);
         dset = H5Dopen2 (file, SRC_DATASET[i], H5P_DEFAULT);
-        status = H5Dset_extent (dset, extdims);       
+        status = H5Dset_extent (dset, extdims);
         src_space = H5Dget_space (dset);
         start[0] = DIM0_1;
         start[1] = 0;
@@ -197,7 +197,7 @@ main (void)
         block[1] = DIM1;
         block[2] = DIM2;
 
-        mem_space = H5Screate_simple(RANK, dims, NULL); 
+        mem_space = H5Screate_simple(RANK, dims, NULL);
         status = H5Sselect_hyperslab (src_space, H5S_SELECT_SET, start, NULL, count, block);
         status = H5Dwrite (dset, H5T_NATIVE_INT, mem_space, src_space, H5P_DEFAULT,
                     wdata);
@@ -207,8 +207,8 @@ main (void)
       }
 
     status = H5Dclose (vdset);
-    status = H5Fclose (vfile);    
-     
+    status = H5Fclose (vfile);
+
     /*
      * Now we begin the read section of this example.
      */
@@ -229,7 +229,7 @@ main (void)
      */
     layout = H5Pget_layout (dcpl);
 
-    if (H5D_VIRTUAL == layout) 
+    if (H5D_VIRTUAL == layout)
         printf(" Dataset has a virtual layout \n");
     else
         printf(" Wrong layout found \n");
@@ -240,15 +240,15 @@ main (void)
      status = H5Pget_virtual_count (dcpl, &num_map);
      printf(" Number of mappings is %lu\n", (unsigned long)num_map);
 
-     /* 
+     /*
       * Get mapping parameters for each mapping.
       */
-      for (i = 0; i < (int)num_map; i++) {   
+      for (i = 0; i < (int)num_map; i++) {
       printf(" Mapping %d \n", i);
       printf("         Selection in the virtual dataset \n");
       /* Get selection in the virttual  dataset */
           vspace = H5Pget_virtual_vspace (dcpl, (size_t)i);
-          if (H5Sget_select_type(vspace) == H5S_SEL_HYPERSLABS) { 
+          if (H5Sget_select_type(vspace) == H5S_SEL_HYPERSLABS) {
               if (H5Sis_regular_hyperslab(vspace)) {
                    status = H5Sget_regular_hyperslab (vspace, start_out, stride_out, count_out, block_out);
                    printf("         start  = [%llu, %llu, %llu] \n", (unsigned long long)start_out[0], (unsigned long long)start_out[1], (unsigned long long)start_out[2]);
@@ -300,7 +300,7 @@ main (void)
     /* Read all VDS data */
 
     /* EIP We should be able to do it by using H5S_ALL instead of making selection
-     * or using H5Sselect_all from vspace. 
+     * or using H5Sselect_all from vspace.
      */
     start[0] = 0;
     start[1] = 0;
@@ -315,12 +315,12 @@ main (void)
     status = H5Sselect_hyperslab (vspace, H5S_SELECT_SET, start, NULL, count, block);
     mem_space = H5Screate_simple(RANK, vdsdims_out, NULL);
     status = H5Dread (vdset, H5T_NATIVE_INT, mem_space, vspace, H5P_DEFAULT,
-                    rdata);   
+                    rdata);
     printf (" All data: \n");
     for (i=0; i < (int)vdsdims_out[0]; i++) {
         for (j=0; j < (int)vdsdims_out[1]; j++) {
              printf ("(%d, %d, 0)", i, j);
-             for (k=0; k < (int)vdsdims_out[2]; k++) 
+             for (k=0; k < (int)vdsdims_out[2]; k++)
                  printf (" %d ", rdata[i][j][k]);
              printf ("\n");
         }
@@ -338,16 +338,16 @@ main (void)
     block[0] = 1;
     block[1] = vdsdims_out[1];
     block[2] = vdsdims_out[2];
-    dims[0] = 2*DIM0_1; 
+    dims[0] = 2*DIM0_1;
     status = H5Sselect_hyperslab (vspace, H5S_SELECT_SET, start, stride, count, block);
     mem_space = H5Screate_simple(RANK, dims,  NULL);
     status = H5Dread (vdset, H5T_NATIVE_INT, mem_space, vspace, H5P_DEFAULT,
-                    a_rdata);   
+                    a_rdata);
     printf (" All data: \n");
     for (i=0; i < 2*DIM0_1; i++) {
         for (j=0; j < (int)vdsdims_out[1]; j++) {
              printf ("(%d, %d, 0)", i, j);
-             for (k=0; k < (int)vdsdims_out[2]; k++) 
+             for (k=0; k < (int)vdsdims_out[2]; k++)
                  printf (" %d ", a_rdata[i][j][k]);
              printf ("\n");
         }
diff --git a/examples/h5_vds-percival.c b/examples/h5_vds-percival.c
index 11a974b..aeca368 100644
--- a/examples/h5_vds-percival.c
+++ b/examples/h5_vds-percival.c
@@ -12,8 +12,8 @@
 /************************************************************
 
   This example illustrates the concept of the virtual dataset.
-  Percival use case. Every fifth 10x10 plane in VDS is stored in 
-  the corresponding 3D unlimited dataset. 
+  Percival use case. Every fifth 10x10 plane in VDS is stored in
+  the corresponding 3D unlimited dataset.
   EIP: For now we will use finite dimension.
   There are 4 source datasets total.
   This file is intended for use with HDF5 Library version 1.10
@@ -28,18 +28,18 @@
 #define FILE         "vds-percival.h5"
 #define DATASET      "VDS-Percival"
 /* later
-#define VDSDIM0       H5S_UNLIMITED 
+#define VDSDIM0       H5S_UNLIMITED
 */
 #define VDSDIM0       40
-#define VDSDIM1       10 
-#define VDSDIM2       10 
+#define VDSDIM1       10
+#define VDSDIM2       10
 /* later
-#define DIM0          H5S_UNLIMITED 
+#define DIM0          H5S_UNLIMITED
 */
-#define DIM0          10 
-#define DIM1          10 
-#define DIM2          10 
-#define RANK          3 
+#define DIM0          10
+#define DIM1          10
+#define DIM2          10
+#define RANK          3
 #define PLANE_STRIDE  4
 
 const char *SRC_FILE[] = {
@@ -64,7 +64,7 @@ main (void)
     hid_t        dcpl;
     herr_t       status;
     hsize_t      vdsdims[3] = {VDSDIM0, VDSDIM1, VDSDIM2},
-                 vdsdims_max[3] = {VDSDIM0, VDSDIM1, VDSDIM2}, 
+                 vdsdims_max[3] = {VDSDIM0, VDSDIM1, VDSDIM2},
                  dims[3] = {DIM0, DIM1, DIM2},
                  dims_max[3] = {DIM0, DIM1, DIM2},
                  start[3],                   /* Hyperslab start parameter for VDS */
@@ -94,7 +94,7 @@ main (void)
         for (j = 0; j < DIM0*DIM1*DIM2; j++) wdata[j] = i+1;
 
         /*
-         * Create the source files and  datasets. Write data to each dataset and 
+         * Create the source files and  datasets. Write data to each dataset and
          * close all resources.
          */
 
@@ -107,7 +107,7 @@ main (void)
         status = H5Sclose (src_space);
         status = H5Dclose (dset);
         status = H5Fclose (file);
-    }    
+    }
 
     file = H5Fcreate (FILE, H5F_ACC_TRUNC, H5P_DEFAULT, H5P_DEFAULT);
 
@@ -119,7 +119,7 @@ main (void)
 
     /* Create VDS creation property */
     dcpl = H5Pcreate (H5P_DATASET_CREATE);
-     
+
     /* Initialize hyperslab values */
 
     start[0] = 0;
@@ -144,18 +144,18 @@ main (void)
     block[1] = DIM1;
     block[2] = DIM2;
 
-    /* 
-     * Build the mappings 
+    /*
+     * Build the mappings
      *
      */
     status = H5Sselect_hyperslab (src_space, H5S_SELECT_SET, start, NULL, src_count, block);
     for (i=0; i < PLANE_STRIDE; i++) {
         status = H5Sselect_hyperslab (vspace, H5S_SELECT_SET, start, stride, count, block);
         status = H5Pset_virtual (dcpl, vspace, SRC_FILE[i], SRC_DATASET[i], src_space);
-        start[0]++; 
-    } 
+        start[0]++;
+    }
 
-    H5Sselect_none(vspace); 
+    H5Sselect_none(vspace);
 
     /* Create a virtual dataset */
     dset = H5Dcreate2 (file, DATASET, H5T_NATIVE_INT, vspace, H5P_DEFAULT,
@@ -163,8 +163,8 @@ main (void)
     status = H5Sclose (vspace);
     status = H5Sclose (src_space);
     status = H5Dclose (dset);
-    status = H5Fclose (file);    
-     
+    status = H5Fclose (file);
+
     /*
      * Now we begin the read section of this example.
      */
@@ -185,7 +185,7 @@ main (void)
      */
     layout = H5Pget_layout (dcpl);
 
-    if (H5D_VIRTUAL == layout) 
+    if (H5D_VIRTUAL == layout)
         printf(" Dataset has a virtual layout \n");
     else
         printf(" Wrong layout found \n");
@@ -196,15 +196,15 @@ main (void)
      status = H5Pget_virtual_count (dcpl, &num_map);
      printf(" Number of mappings is %lu\n", (unsigned long)num_map);
 
-     /* 
+     /*
       * Get mapping parameters for each mapping.
       */
-      for (i = 0; i < (int)num_map; i++) {   
+      for (i = 0; i < (int)num_map; i++) {
       printf(" Mapping %d \n", i);
       printf("         Selection in the virtual dataset \n");
       /* Get selection in the virttual  dataset */
           vspace = H5Pget_virtual_vspace (dcpl, (size_t)i);
-          if (H5Sget_select_type(vspace) == H5S_SEL_HYPERSLABS) { 
+          if (H5Sget_select_type(vspace) == H5S_SEL_HYPERSLABS) {
               if (H5Sis_regular_hyperslab(vspace)) {
                    status = H5Sget_regular_hyperslab (vspace, start_out, stride_out, count_out, block_out);
                    printf("         start  = [%llu, %llu, %llu] \n", (unsigned long long)start_out[0], (unsigned long long)start_out[1], (unsigned long long)start_out[2]);
diff --git a/examples/h5_vds-simpleIO.c b/examples/h5_vds-simpleIO.c
index 56fa72b..5fd5c52 100644
--- a/examples/h5_vds-simpleIO.c
+++ b/examples/h5_vds-simpleIO.c
@@ -14,7 +14,7 @@
   This example illustrates the concept of virtual dataset I/O
   The program  creates 2-dim source dataset and writes
   data to it. Then it creates 2-dim virtual dataset that has
-  the same dimension sizes and maps the all elements of the 
+  the same dimension sizes and maps the all elements of the
   virtual dataset to all elements of the source dataset.
   Then VDS is read back.
 
@@ -30,7 +30,7 @@
 #define FILE         "vds-simpleIO.h5"
 #define DATASET      "VDS"
 #define DIM1            6
-#define DIM0            4 
+#define DIM0            4
 #define RANK            2
 
 #define SRC_FILE      "a.h5"
@@ -40,27 +40,27 @@
 int
 main (void)
 {
-    hid_t        file, space, src_space, vspace, dset; /* Handles */ 
+    hid_t        file, space, src_space, vspace, dset; /* Handles */
     hid_t        dcpl;
     herr_t       status;
     hsize_t      vdsdims[2] = {DIM0, DIM1},     /* Virtual dataset dimension */
                  dims[2] = {DIM0, DIM1};        /* Source dataset dimensions */
     int          wdata[DIM0][DIM1],             /* Write buffer for source dataset */
                  rdata[DIM0][DIM1],             /* Read buffer for virtual dataset */
-                 i, j;  
+                 i, j;
     H5D_layout_t layout;                        /* Storage layout */
     size_t       num_map;                       /* Number of mappings */
     ssize_t      len;                           /* Length of the string; also a return value */
-    char         *filename;                  
+    char         *filename;
     char         *dsetname;
     /*
      * Initialize data.
      */
-        for (i = 0; i < DIM0; i++) 
+        for (i = 0; i < DIM0; i++)
             for (j = 0; j < DIM1; j++) wdata[i][j] = i+1;
-         
+
      /*
-      * Create the source file and the dataset. Write data to the source dataset 
+      * Create the source file and the dataset. Write data to the source dataset
       * and close all resources.
       */
 
@@ -82,12 +82,12 @@ main (void)
 
     /* Set VDS creation property. */
     dcpl = H5Pcreate (H5P_DATASET_CREATE);
-     
-    /* 
+
+    /*
      * Build the mappings.
      * Selections in the source datasets are H5S_ALL.
-     * In the virtual dataset we select the first, the second and the third rows 
-     * and map each row to the data in the corresponding source dataset. 
+     * In the virtual dataset we select the first, the second and the third rows
+     * and map each row to the data in the corresponding source dataset.
      */
     src_space = H5Screate_simple (RANK, dims, NULL);
     status = H5Pset_virtual (dcpl, vspace, SRC_FILE, SRC_DATASET, src_space);
@@ -98,8 +98,8 @@ main (void)
     status = H5Sclose (vspace);
     status = H5Sclose (src_space);
     status = H5Dclose (dset);
-    status = H5Fclose (file);    
-     
+    status = H5Fclose (file);
+
     /*
      * Now we begin the read section of this example.
      */
@@ -118,7 +118,7 @@ main (void)
      * Get storage layout.
      */
     layout = H5Pget_layout (dcpl);
-    if (H5D_VIRTUAL == layout) 
+    if (H5D_VIRTUAL == layout)
         printf(" Dataset has a virtual layout \n");
     else
         printf(" Wrong layout found \n");
@@ -129,10 +129,10 @@ main (void)
      status = H5Pget_virtual_count (dcpl, &num_map);
      printf(" Number of mappings is %lu\n", (unsigned long)num_map);
 
-     /* 
+     /*
       * Get mapping parameters for each mapping.
       */
-    for (i = 0; i < (int)num_map; i++) {   
+    for (i = 0; i < (int)num_map; i++) {
         printf(" Mapping %d \n", i);
         printf("         Selection in the virtual dataset ");
         /* Get selection in the virttual  dataset */
diff --git a/examples/h5_vds.c b/examples/h5_vds.c
index 76b849a..cce7b88 100644
--- a/examples/h5_vds.c
+++ b/examples/h5_vds.c
@@ -16,15 +16,15 @@
   This example illustrates the concept of virtual dataset.
   The program  creates three 1-dim source datasets and writes
   data to them. Then it creates a 2-dim virtual dataset and
-  maps the first three rows of the virtual dataset to the data 
-  in the source datasets. Elements of a row are mapped to all 
+  maps the first three rows of the virtual dataset to the data
+  in the source datasets. Elements of a row are mapped to all
   elements of the corresponding source dataset.
-  The fourth row is not mapped and will be filled with the fill 
-  values when virtual dataset is read back. 
-   
+  The fourth row is not mapped and will be filled with the fill
+  values when virtual dataset is read back.
+
   The program closes all datasets, and then reopens the virtual
   dataset, and finds and prints its creation properties.
-  Then it reads the values. 
+  Then it reads the values.
 
   This file is intended for use with HDF5 Library version 1.10
 
@@ -37,9 +37,9 @@
 
 #define FILE         "vds.h5"
 #define DATASET      "VDS"
-#define VDSDIM1         6 
-#define VDSDIM0         4 
-#define DIM0            6 
+#define VDSDIM1         6
+#define VDSDIM0         4
+#define DIM0            6
 #define RANK1           1
 #define RANK2           2
 
@@ -58,7 +58,7 @@ const char *SRC_DATASET[] = {
 int
 main (void)
 {
-    hid_t        file, space, src_space, vspace, dset; /* Handles */ 
+    hid_t        file, space, src_space, vspace, dset; /* Handles */
     hid_t        dcpl;
     herr_t       status;
     hsize_t      vdsdims[2] = {VDSDIM0, VDSDIM1},      /* Virtual datasets dimension */
@@ -73,12 +73,12 @@ main (void)
                  block_out[2];
     int          wdata[DIM0],                /* Write buffer for source dataset */
                  rdata[VDSDIM0][VDSDIM1],    /* Read buffer for virtual dataset */
-                 i, j, k, l;  
+                 i, j, k, l;
     int          fill_value = -1;            /* Fill value for VDS */
     H5D_layout_t layout;                     /* Storage layout */
     size_t       num_map;                    /* Number of mappings */
     ssize_t      len;                        /* Length of the string; also a return value */
-    char         *filename;                  
+    char         *filename;
     char         *dsetname;
     hsize_t      nblocks;
     hsize_t      *buf;                       /* Buffer to hold hyperslab coordinates */
@@ -91,9 +91,9 @@ main (void)
          * Initialize data for i-th source dataset.
          */
         for (j = 0; j < DIM0; j++) wdata[j] = i+1;
-        
+
         /*
-         * Create the source files and  datasets. Write data to each dataset and 
+         * Create the source files and  datasets. Write data to each dataset and
          * close all resources.
          */
 
@@ -117,7 +117,7 @@ main (void)
     /* Set VDS creation property. */
     dcpl = H5Pcreate (H5P_DATASET_CREATE);
     status = H5Pset_fill_value (dcpl, H5T_NATIVE_INT, &fill_value);
-     
+
     /* Initialize hyperslab values. */
     start[0] = 0;
     start[1] = 0;
@@ -126,11 +126,11 @@ main (void)
     block[0] = 1;
     block[1] = VDSDIM1;
 
-    /* 
+    /*
      * Build the mappings.
      * Selections in the source datasets are H5S_ALL.
-     * In the virtual dataset we select the first, the second and the third rows 
-     * and map each row to the data in the corresponding source dataset. 
+     * In the virtual dataset we select the first, the second and the third rows
+     * and map each row to the data in the corresponding source dataset.
      */
     src_space = H5Screate_simple (RANK1, dims, NULL);
     for (i = 0; i < 3; i++) {
@@ -146,8 +146,8 @@ main (void)
     status = H5Sclose (space);
     status = H5Sclose (src_space);
     status = H5Dclose (dset);
-    status = H5Fclose (file);    
-     
+    status = H5Fclose (file);
+
     /*
      * Now we begin the read section of this example.
      */
@@ -167,7 +167,7 @@ main (void)
      * Get storage layout.
      */
     layout = H5Pget_layout (dcpl);
-    if (H5D_VIRTUAL == layout) 
+    if (H5D_VIRTUAL == layout)
         printf(" Dataset has a virtual layout \n");
     else
         printf(" Wrong layout found \n");
@@ -178,26 +178,26 @@ main (void)
      status = H5Pget_virtual_count (dcpl, &num_map);
      printf(" Number of mappings is %lu\n", (unsigned long)num_map);
 
-     /* 
+     /*
       * Get mapping parameters for each mapping.
       */
-    for (i = 0; i < (int)num_map; i++) {   
+    for (i = 0; i < (int)num_map; i++) {
         printf(" Mapping %d \n", i);
         printf("         Selection in the virtual dataset ");
         /* Get selection in the virttual  dataset */
         vspace = H5Pget_virtual_vspace (dcpl, (size_t)i);
 
         /* Make sure that this is a hyperslab selection and then print information. */
-        if (H5Sget_select_type(vspace) == H5S_SEL_HYPERSLABS) { 
+        if (H5Sget_select_type(vspace) == H5S_SEL_HYPERSLABS) {
             nblocks = H5Sget_select_hyper_nblocks (vspace);
             buf = (hsize_t *)malloc(sizeof(hsize_t)*2*RANK2*nblocks);
             status = H5Sget_select_hyper_blocklist (vspace, (hsize_t)0, nblocks, buf);
             for (l=0; l<nblocks; l++) {
                 printf("(");
-                for (k=0; k<RANK2-1; k++) 
+                for (k=0; k<RANK2-1; k++)
                     printf("%d,", (int)buf[k]);
                 printf("%d ) - (", (int)buf[k]);
-                for (k=0; k<RANK2-1; k++) 
+                for (k=0; k<RANK2-1; k++)
                     printf("%d,", (int)buf[RANK2+k]);
                 printf("%d)\n", (int)buf[RANK2+k]);
             }
diff --git a/examples/run-c-ex.sh.in b/examples/run-c-ex.sh.in
index 90d5c6a..b649d98 100644
--- a/examples/run-c-ex.sh.in
+++ b/examples/run-c-ex.sh.in
@@ -53,7 +53,7 @@ fi
 )
 
 # Where the tool is installed.
-# default is relative path to installed location of the tools 
+# default is relative path to installed location of the tools
 prefix="${prefix:-../${prefix_relto_examplesdir}}"
 PARALLEL=@PARALLEL@             # Am I in parallel mode?
 AR="@AR@"
@@ -179,5 +179,5 @@ rm *.h5
 rm -rf red blue u2w
 echo
 
-exit $EXIT_VALUE 
+exit $EXIT_VALUE
 
diff --git a/examples/testh5cc.sh.in b/examples/testh5cc.sh.in
index 40ca466..9f766dd 100644
--- a/examples/testh5cc.sh.in
+++ b/examples/testh5cc.sh.in
@@ -100,9 +100,9 @@ main (void)
 
     printf("HDF5 C Sample program ran successfully. File %s generated.\n", H5FILE_NAME);
     remove(H5FILE_NAME);
- 
+
     return 0;
-}     
+}
 EOF
 
 # generate prog1
@@ -143,7 +143,7 @@ main (void)
     remove(H5FILE_NAME);
 
     return 0;
-}     
+}
 EOF
 
 # Generate HDF5 v1.6 Main Program:
diff --git a/fortran/examples/compound_complex_fortran2003.f90 b/fortran/examples/compound_complex_fortran2003.f90
index 6d0f291..9f0cc9f 100644
--- a/fortran/examples/compound_complex_fortran2003.f90
+++ b/fortran/examples/compound_complex_fortran2003.f90
@@ -11,8 +11,8 @@
 !   help@hdfgroup.org.                                                        *
 ! * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * *
 !
-! This example shows how to create an array of a compound datatype which 
-! contains an array of type complex and how to write it to hdf5 
+! This example shows how to create an array of a compound datatype which
+! contains an array of type complex and how to write it to hdf5
 ! and how to read it back into a compound datatype for hdf5.
 !
 
@@ -85,7 +85,7 @@ PROGRAM compound_complex_fortran2003
   ! Open the file and the dataset.
   !
   CALL H5Fopen_f("test.h5", H5F_ACC_RDONLY_F, file_id, error)
-  
+
   CALL H5Dopen_f(file_id, "samples", dset_id, error)
   !
   ! Create the memory data type.
diff --git a/fortran/examples/compound_fortran2003.f90 b/fortran/examples/compound_fortran2003.f90
index 0168177..09e1b04 100644
--- a/fortran/examples/compound_fortran2003.f90
+++ b/fortran/examples/compound_fortran2003.f90
@@ -77,10 +77,10 @@ PROGRAM main
   INTEGER(SIZE_T) :: offset, sizeof_compound
   INTEGER :: hdferr
   TYPE(C_PTR) :: f_ptr
-  
-  INTEGER(SIZE_T) :: type_sizei  ! Size of the integer datatype 
-  INTEGER(SIZE_T) :: type_sizer  ! Size of the real datatype 
-  INTEGER(SIZE_T) :: type_sized  ! Size of the double datatype 
+
+  INTEGER(SIZE_T) :: type_sizei  ! Size of the integer datatype
+  INTEGER(SIZE_T) :: type_sizer  ! Size of the real datatype
+  INTEGER(SIZE_T) :: type_sized  ! Size of the double datatype
   INTEGER(hid_t) :: tid3      ! /* Nested Array Datatype ID	*/
   INTEGER(HSIZE_T), DIMENSION(1) :: tdims1=(/13/)
   !
@@ -133,7 +133,7 @@ PROGRAM main
   !
   ! Write data to the dataset
   !
-  
+
   f_ptr = C_LOC(s1(1))
   CALL H5Dwrite_f(dataset, s1_tid, f_ptr, hdferr)
 
@@ -150,7 +150,7 @@ PROGRAM main
   !
 
   CALL H5Fopen_f(H5FILE_NAME, H5F_ACC_RDONLY_F, file, hdferr)
-  
+
   CALL H5Dopen_f(file, DATASETNAME, dataset,hdferr)
 
   !
diff --git a/fortran/examples/h5_cmprss.f90 b/fortran/examples/h5_cmprss.f90
index 61dd7b0..f543024 100644
--- a/fortran/examples/h5_cmprss.f90
+++ b/fortran/examples/h5_cmprss.f90
@@ -10,17 +10,17 @@
 !   If you do not have access to either file, you may request a copy from     *
 !   help@hdfgroup.org.                                                        *
 ! * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * *
-! 
+!
 !  This example illustrates how to create a compressed dataset.
 !  It is used in the HDF5 Tutorial.
-! 
+!
 PROGRAM h5_cmprss
 
-  USE HDF5 ! This module contains all necessary modules 
+  USE HDF5 ! This module contains all necessary modules
 
   IMPLICIT NONE
   !
-  ! The dataset is stored in file "h5_cmprss.h5" 
+  ! The dataset is stored in file "h5_cmprss.h5"
   !
   CHARACTER(LEN=12), PARAMETER :: filename = "h5_cmprss.h5"
   INTEGER, PARAMETER  :: rank = 2   ! Rank of the data set
@@ -33,7 +33,7 @@ PROGRAM h5_cmprss
   INTEGER :: error
   INTEGER(hsize_t), DIMENSION(1:rank) :: dims ! dimensions of data
   INTEGER(hsize_t), DIMENSION(1:rank) :: cdims ! sizes of chunked data
- 
+
   INTEGER :: i,j, numfilt
   INTEGER, DIMENSION(1:dim0,1:dim1) :: buf ! write buffer
   INTEGER, DIMENSION(1:dim0,1:dim1) :: rbuf ! read buffer
@@ -63,15 +63,15 @@ PROGRAM h5_cmprss
   CALL h5screate_simple_f(rank, dims, dataspace_id, error)
   CALL h5pcreate_f(H5P_DATASET_CREATE_F, plist_id, error)
   !
-  ! Dataset must be chunked for compression 
+  ! Dataset must be chunked for compression
   cdims(1:2) = 20
   CALL h5pset_chunk_f(plist_id, 2, cdims, error)
 
   ! Set ZLIB / DEFLATE Compression using compression level 6.
-  ! To use SZIP Compression comment out these lines. 
+  ! To use SZIP Compression comment out these lines.
   CALL h5pset_deflate_f(plist_id, 6, error)
 
-  ! Uncomment these lines to set SZIP Compression 
+  ! Uncomment these lines to set SZIP Compression
   !szip_options_mask = H5_SZIP_NN_OM_F
   !szip_pixels_per_block = 16
   !CALL H5Pset_szip_f(plist_id, szip_options_mask, szip_pixels_per_block, error)
@@ -86,7 +86,7 @@ PROGRAM h5_cmprss
      ENDDO
   ENDDO
 
-  data_dims(1:2) = (/dim0,dim1/) 
+  data_dims(1:2) = (/dim0,dim1/)
   CALL h5dwrite_f(dataset_id, H5T_NATIVE_INTEGER, buf, data_dims, error)
 
   ! Close resources
@@ -99,12 +99,12 @@ PROGRAM h5_cmprss
   CALL h5fopen_f(filename, H5F_ACC_RDONLY_F, file_id, error)
   CALL h5dopen_f(file_id, "Compressed_Data", dataset_id, error)
 
-  ! Retrieve filter information. 
+  ! Retrieve filter information.
   CALL h5dget_create_plist_f(dataset_id, plist_id, error)
-    
+
   CALL h5pget_nfilters_f(plist_id, numfilt, error)
   WRITE(*,'(A, I0)') "Number of filters associated with dataset: ", numfilt
-     
+
   DO i = 1, numfilt
      nelmts = 1
      CALL h5pget_filter_f(plist_id, 0, flags, nelmts, cd_values, &
@@ -121,7 +121,7 @@ PROGRAM h5_cmprss
    ENDDO
   data_dims(1:2) = (/dim0,dim1/)
   CALL h5dread_f(dataset_id, H5T_NATIVE_INTEGER, rbuf, data_dims, error)
-    
+
   CALL h5dclose_f(dataset_id, error)
   CALL h5pclose_f(plist_id, error)
   CALL h5fclose_f(file_id, error)
diff --git a/fortran/examples/h5_extend.f90 b/fortran/examples/h5_extend.f90
index 20b91ff..93bfea8 100644
--- a/fortran/examples/h5_extend.f90
+++ b/fortran/examples/h5_extend.f90
@@ -15,12 +15,12 @@
 
 PROGRAM H5_EXTEND
 
-  USE HDF5 ! This module contains all necessary modules 
+  USE HDF5 ! This module contains all necessary modules
 
   IMPLICIT NONE
 
   !
-  !the dataset is stored in file "extend.h5" 
+  !the dataset is stored in file "extend.h5"
   !
   CHARACTER(LEN=9), PARAMETER :: filename = "extend.h5"
 
@@ -30,11 +30,11 @@ PROGRAM H5_EXTEND
   CHARACTER(LEN=15), PARAMETER :: dsetname = "ExtendibleArray"
   INTEGER :: RANK = 2
 
-  INTEGER(HID_T) :: file_id       ! File identifier 
-  INTEGER(HID_T) :: dset_id       ! Dataset identifier 
-  INTEGER(HID_T) :: dataspace     ! Dataspace identifier 
-  INTEGER(HID_T) :: memspace      ! Memory dataspace identifier 
-  INTEGER(HID_T) :: crp_list      ! Dataset creation property identifier 
+  INTEGER(HID_T) :: file_id       ! File identifier
+  INTEGER(HID_T) :: dset_id       ! Dataset identifier
+  INTEGER(HID_T) :: dataspace     ! Dataspace identifier
+  INTEGER(HID_T) :: memspace      ! Memory dataspace identifier
+  INTEGER(HID_T) :: crp_list      ! Dataset creation property identifier
 
   !
   !dataset dimensions at creation time
@@ -42,7 +42,7 @@ PROGRAM H5_EXTEND
   INTEGER(HSIZE_T), DIMENSION(1:2) :: dims = (/3,3/)
 
   !
-  !data dimensions 
+  !data dimensions
   !
   INTEGER(HSIZE_T), DIMENSION(1:2) :: dimsc = (/2,5/)
   INTEGER(HSIZE_T), DIMENSION(1:2) :: dimsm = (/3,7/)
@@ -50,49 +50,49 @@ PROGRAM H5_EXTEND
   !
   !Maximum dimensions
   !
-  INTEGER(HSIZE_T), DIMENSION(1:2) :: maxdims 
+  INTEGER(HSIZE_T), DIMENSION(1:2) :: maxdims
 
   INTEGER(HSIZE_T), DIMENSION(1:2) :: offset
-  INTEGER(HSIZE_T), DIMENSION(1:2) :: count 
+  INTEGER(HSIZE_T), DIMENSION(1:2) :: count
 
   !
-  ! Variables for reading and writing 
+  ! Variables for reading and writing
   !
-  INTEGER, DIMENSION(1:3,1:3)  :: data1 
+  INTEGER, DIMENSION(1:3,1:3)  :: data1
   INTEGER, DIMENSION(1:21) :: data2 = &
        (/2, 3, 4, 2, 3, 4, 2, 3, 4, 2, 3, 4, 2, 3, 4, 2, 3, 4, 2, 3, 4/)
   INTEGER(HSIZE_T), DIMENSION(1:2) :: data_dims
 
   !
-  !Size of data in the file 
+  !Size of data in the file
   !
   INTEGER(HSIZE_T), DIMENSION(1:2) :: size
 
   !
-  !general purpose integer 
+  !general purpose integer
   !
   INTEGER(HSIZE_T) :: i, j
 
   !
-  !flag to check operation success 
+  !flag to check operation success
   !
-  INTEGER :: error 
+  INTEGER :: error
 
   !
   !Variables used in reading data back
-  !  
+  !
   INTEGER(HSIZE_T), DIMENSION(1:2) :: dimsr, maxdimsr
   INTEGER :: rankr
-  INTEGER, DIMENSION(1:3,1:10)  :: rdata 
+  INTEGER, DIMENSION(1:3,1:10)  :: rdata
 
   !
   !Initialize FORTRAN predifined datatypes
   !
-  CALL h5open_f(error) 
+  CALL h5open_f(error)
 
   !
   !Create a new file using default properties.
-  ! 
+  !
   CALL h5fcreate_f(filename, H5F_ACC_TRUNC_F, file_id, error)
 
   !
@@ -117,7 +117,7 @@ PROGRAM H5_EXTEND
   CALL h5sclose_f(dataspace, error)
 
   !
-  !Fill data array with 1's 
+  !Fill data array with 1's
   !
   DO i = 1, dims(1)
      DO j = 1, dims(2)
@@ -128,7 +128,7 @@ PROGRAM H5_EXTEND
   !
   !Write data array to dataset
   !
-  data_dims(1:2) = (/3,3/) 
+  data_dims(1:2) = (/3,3/)
   CALL h5dwrite_f(dset_id, H5T_NATIVE_INTEGER, data1, data_dims, error)
 
   !
@@ -144,7 +144,7 @@ PROGRAM H5_EXTEND
 
   !
   !Write to 3x7 extended part of dataset
-  !   
+  !
   CALL h5dget_space_f(dset_id, dataspace, error)
   CALL h5sselect_hyperslab_f(dataspace, H5S_SELECT_SET_F, &
        offset, count, error)
@@ -185,7 +185,7 @@ PROGRAM H5_EXTEND
 
   !
   !Get dataspace's dimensions.
-  ! 
+  !
   CALL h5sget_simple_extent_dims_f(dataspace, dimsr, maxdimsr, error)
 
   !
@@ -204,15 +204,15 @@ PROGRAM H5_EXTEND
   CALL h5screate_simple_f(rankr, dimsr, memspace, error)
 
   !
-  !Read data 
+  !Read data
   !
   data_dims(1:2) = (/3,10/)
   CALL H5dread_f(dset_id, H5T_NATIVE_INTEGER, rdata, data_dims, &
        error, memspace, dataspace)
 
-  WRITE(*,'(A)') "Dataset:" 
+  WRITE(*,'(A)') "Dataset:"
   DO i = 1, dimsr(1)
-     WRITE(*,'(100(I0,1X))') rdata(i,1:dimsr(2))    
+     WRITE(*,'(100(I0,1X))') rdata(i,1:dimsr(2))
   END DO
 
   !
diff --git a/fortran/examples/h5_subset.f90 b/fortran/examples/h5_subset.f90
index ab33c86..9bebce5 100644
--- a/fortran/examples/h5_subset.f90
+++ b/fortran/examples/h5_subset.f90
@@ -11,23 +11,23 @@
 !   help@hdfgroup.org.                                                        *
 ! * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * *
 !
-! This example shows how to write and read a hyperslab.  
+! This example shows how to write and read a hyperslab.
 ! It is used in the HDF5 Tutorial.
 !
 
-PROGRAM H5_SUBSET 
+PROGRAM H5_SUBSET
 
-  USE HDF5 ! This module contains all necessary modules 
+  USE HDF5 ! This module contains all necessary modules
 
   IMPLICIT NONE
 
   CHARACTER(LEN=9), PARAMETER :: filename = "subset.h5"  ! File name
   CHARACTER(LEN=8), PARAMETER :: dsetname = "IntArray"   ! Dataset name
 
-  INTEGER(HID_T) :: file_id       ! File identifier 
-  INTEGER(HID_T) :: dset_id       ! Dataset identifier 
-  INTEGER(HID_T) :: dataspace     ! Dataspace identifier 
-  INTEGER(HID_T) :: memspace      ! memspace identifier 
+  INTEGER(HID_T) :: file_id       ! File identifier
+  INTEGER(HID_T) :: dset_id       ! Dataset identifier
+  INTEGER(HID_T) :: dataspace     ! Dataspace identifier
+  INTEGER(HID_T) :: memspace      ! memspace identifier
 
   !
   ! To change the subset size, modify size of dimsm, sdata, dim0_sub,
@@ -35,57 +35,57 @@ PROGRAM H5_SUBSET
   !
   INTEGER(HSIZE_T), DIMENSION(1:2) :: dimsm = (/4,3/) ! Dataset dimensions
   INTEGER, DIMENSION(1:4,1:3) :: sdata                  ! Subset buffer
-  INTEGER :: dim0_sub = 4   
-  INTEGER :: dim1_sub = 3 
+  INTEGER :: dim0_sub = 4
+  INTEGER :: dim1_sub = 3
   INTEGER(HSIZE_T), DIMENSION(1:2) :: count = (/4,3/)  ! Size of hyperslab
   INTEGER(HSIZE_T), DIMENSION(1:2) :: offset = (/2,1/) ! Hyperslab offset
-  INTEGER(HSIZE_T), DIMENSION(1:2) :: stride = (/1,1/) ! Hyperslab stride 
-  INTEGER(HSIZE_T), DIMENSION(1:2) :: block = (/1,1/)  ! Hyperslab block size 
+  INTEGER(HSIZE_T), DIMENSION(1:2) :: stride = (/1,1/) ! Hyperslab stride
+  INTEGER(HSIZE_T), DIMENSION(1:2) :: block = (/1,1/)  ! Hyperslab block size
 
   INTEGER(HSIZE_T), DIMENSION(1:2) :: dimsf = (/10,8/) ! Dataset dimensions
 
 
   INTEGER, DIMENSION(1:10,1:8) :: data     ! Data to write
-  INTEGER, DIMENSION(1:10,1:8) :: rdata    ! Data to read 
+  INTEGER, DIMENSION(1:10,1:8) :: rdata    ! Data to read
 
   INTEGER :: rank = 2      ! Dataset rank ( in file )
   INTEGER :: dim0 = 10     ! Dataset size in file
-  INTEGER :: dim1 = 8 
+  INTEGER :: dim1 = 8
 
-  INTEGER :: i, j 
+  INTEGER :: i, j
 
   INTEGER :: error         ! Error flag
   INTEGER(HSIZE_T), DIMENSION(2) :: data_dims
 
   !
-  ! Write data to the HDF5 file.  
+  ! Write data to the HDF5 file.
   !
 
   !
-  ! Data initialization. 
+  ! Data initialization.
   !
-  DO i = 1, dim0 
+  DO i = 1, dim0
      DO j = 1, dim1
         IF (i .LE. (dim0 / 2)) THEN
-           data(i,j) = 1 
-        ELSE 
-           data(i,j) = 2 
+           data(i,j) = 1
+        ELSE
+           data(i,j) = 2
         END IF
      END DO
   END DO
 
   !
-  ! Initialize FORTRAN interface. 
+  ! Initialize FORTRAN interface.
   !
-  CALL h5open_f(error) 
+  CALL h5open_f(error)
 
   !
   ! Create a new file using default properties.
-  ! 
+  !
   CALL h5fcreate_f(filename, H5F_ACC_TRUNC_F, file_id, error)
 
   !
-  ! Create the data space for the  dataset. 
+  ! Create the data space for the  dataset.
   !
   CALL h5screate_simple_f(rank, dimsf, dataspace, error)
 
@@ -98,12 +98,12 @@ PROGRAM H5_SUBSET
   !
   ! Write the dataset.
   !
-  data_dims(1) = dim0 
-  data_dims(2) = dim1 
+  data_dims(1) = dim0
+  data_dims(2) = dim1
   CALL h5dwrite_f(dset_id, H5T_NATIVE_INTEGER, data, data_dims, error)
 
   !
-  ! Data Written to File 
+  ! Data Written to File
   !
   WRITE(*,'(/,A)') "Original Data Written to File:"
   DO i = 1, dim0
@@ -138,7 +138,7 @@ PROGRAM H5_SUBSET
   !
   CALL h5dget_space_f(dset_id, dataspace, error)
   CALL h5sselect_hyperslab_f(dataspace, H5S_SELECT_SET_F, &
-       offset, count, error, stride, BLOCK) 
+       offset, count, error, stride, BLOCK)
   !
   ! Create memory dataspace.
   !
@@ -148,9 +148,9 @@ PROGRAM H5_SUBSET
   WRITE(*,'(A,/)') "   offset=2x1 stride=1x1 count=4x3 block=1x1"
 
   !
-  ! Write subset to dataset  
+  ! Write subset to dataset
   !
-  data_dims(1:2) = (/dim0_sub, dim1_sub/) 
+  data_dims(1:2) = (/dim0_sub, dim1_sub/)
   CALL h5dwrite_f(dset_id, H5T_NATIVE_INTEGER, sdata, data_dims, error, &
        memspace, dataspace)
 
@@ -158,10 +158,10 @@ PROGRAM H5_SUBSET
   CALL h5dread_f(dset_id, H5T_NATIVE_INTEGER, rdata, data_dims, error)
 
   !
-  ! Read entire dataset back 
+  ! Read entire dataset back
   !
   WRITE(*,'(A)') "Data in File after Subset Written:"
-  DO i = 1, dim0 
+  DO i = 1, dim0
     WRITE(*,'(100(1X,I0,1X))') rdata(i,1:dim1)
   END DO
   PRINT *, " "
diff --git a/fortran/examples/nested_derived_type.f90 b/fortran/examples/nested_derived_type.f90
index 68354ac..651830c 100644
--- a/fortran/examples/nested_derived_type.f90
+++ b/fortran/examples/nested_derived_type.f90
@@ -1,4 +1,4 @@
-! 
+!
 ! * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * *
 ! Copyright by the Board of Trustees of the University of Illinois.         *
 ! All rights reserved.                                                      *
@@ -82,10 +82,10 @@ PROGRAM main
   INTEGER(SIZE_T) :: offset, sizeof_compound
   INTEGER :: hdferr
   TYPE(C_PTR) :: f_ptr
-  
-  INTEGER(SIZE_T) :: type_sizei  ! Size of the integer datatype 
-  INTEGER(SIZE_T) :: type_sizer  ! Size of the real datatype 
-  INTEGER(SIZE_T) :: type_sized  ! Size of the double datatype 
+
+  INTEGER(SIZE_T) :: type_sizei  ! Size of the integer datatype
+  INTEGER(SIZE_T) :: type_sizer  ! Size of the real datatype
+  INTEGER(SIZE_T) :: type_sized  ! Size of the double datatype
   INTEGER(hid_t) :: tid3      ! /* Nested Array Datatype ID	*/
   INTEGER(HSIZE_T), DIMENSION(1) :: tdims1=(/7/)
   INTEGER(HSIZE_T), DIMENSION(1) :: tdims1a=(/4/)
@@ -136,7 +136,7 @@ PROGRAM main
   !
   ! Write data to the dataset
   !
-  
+
   f_ptr = C_LOC(s1(1))
   CALL H5Dwrite_f(dataset, s1_tid, f_ptr, hdferr)
 
@@ -153,7 +153,7 @@ PROGRAM main
   !
 
   CALL H5Fopen_f(H5FILE_NAME, H5F_ACC_RDONLY_F, file, hdferr)
-  
+
   CALL H5Dopen_f(file, DATASETNAME, dataset,hdferr)
   !
   ! Create a data type for s2
diff --git a/fortran/examples/rwdset_fortran2003.f90 b/fortran/examples/rwdset_fortran2003.f90
index 36ebf0d..f79c8fe 100644
--- a/fortran/examples/rwdset_fortran2003.f90
+++ b/fortran/examples/rwdset_fortran2003.f90
@@ -1,4 +1,4 @@
-! * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * 
+! * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * *
 !   Copyright by The HDF Group.                                               *
 !   Copyright by the Board of Trustees of the University of Illinois.         *
 !   All rights reserved.                                                      *
@@ -9,12 +9,12 @@
 !   distribution tree, or in https://support.hdfgroup.org/ftp/HDF5/releases.  *
 !   If you do not have access to either file, you may request a copy from     *
 !   help@hdfgroup.org.                                                        *
-! * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * 
+! * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * *
 !
 !
-! The following example shows how to write and read to/from an existing dataset. 
-! It opens the file created in the previous example, obtains the dataset 
-! identifier, writes the data to the dataset in the file, 
+! The following example shows how to write and read to/from an existing dataset.
+! It opens the file created in the previous example, obtains the dataset
+! identifier, writes the data to the dataset in the file,
 ! then reads the dataset to memory. Uses updated Fortran 2003 interface
 ! with different KINDs of integers and reals.
 !
@@ -22,8 +22,8 @@ PROGRAM RWDSET_FORTRAN2003
 
   USE ISO_C_BINDING
 
-  USE HDF5 ! This module contains all necessary modules 
-        
+  USE HDF5 ! This module contains all necessary modules
+
   IMPLICIT NONE
 
   INTEGER, PARAMETER :: int_kind_1 = SELECTED_INT_KIND(2)  !should map to INTEGER*1 on most modern processors
@@ -42,13 +42,13 @@ PROGRAM RWDSET_FORTRAN2003
   CHARACTER(LEN=6), PARAMETER :: dsetnamer4 = "dsetr4"     ! Dataset name
   CHARACTER(LEN=6), PARAMETER :: dsetnamer8 = "dsetr8"     ! Dataset name
 
-  INTEGER(HID_T) :: file_id       ! File identifier 
-  INTEGER(HID_T) :: dset_id1      ! Dataset identifier  
-  INTEGER(HID_T) :: dset_id4      ! Dataset identifier   
-  INTEGER(HID_T) :: dset_id8      ! Dataset identifier  
-  INTEGER(HID_T) :: dset_id16     ! Dataset identifier  
-  INTEGER(HID_T) :: dset_idr4      ! Dataset identifier   
-  INTEGER(HID_T) :: dset_idr8      ! Dataset identifier 
+  INTEGER(HID_T) :: file_id       ! File identifier
+  INTEGER(HID_T) :: dset_id1      ! Dataset identifier
+  INTEGER(HID_T) :: dset_id4      ! Dataset identifier
+  INTEGER(HID_T) :: dset_id8      ! Dataset identifier
+  INTEGER(HID_T) :: dset_id16     ! Dataset identifier
+  INTEGER(HID_T) :: dset_idr4      ! Dataset identifier
+  INTEGER(HID_T) :: dset_idr8      ! Dataset identifier
 
   INTEGER :: error ! Error flag
   INTEGER :: i
@@ -65,15 +65,15 @@ PROGRAM RWDSET_FORTRAN2003
   REAL(real_kind_7), DIMENSION(1:4), TARGET :: dset_data_r7, data_out_r7
   REAL(real_kind_15), DIMENSION(1:4), TARGET :: dset_data_r15, data_out_r15
 
-  INTEGER(HSIZE_T), DIMENSION(1:1) :: data_dims = (/4/) 
+  INTEGER(HSIZE_T), DIMENSION(1:1) :: data_dims = (/4/)
   INTEGER(HID_T) :: dspace_id     ! Dataspace identifier
-  
+
   TYPE(C_PTR) :: f_ptr
 
   !
   ! Initialize FORTRAN interface.
   !
-  CALL h5open_f(error) 
+  CALL h5open_f(error)
   !
   ! Initialize the dset_data array.
   !
@@ -130,7 +130,7 @@ PROGRAM RWDSET_FORTRAN2003
   !
   ! Read the dataset.
   !
-  ! Read data back into an integer size that is larger then the original size used for 
+  ! Read data back into an integer size that is larger then the original size used for
   ! writing the data
   f_ptr = C_LOC(data_out_i8a(1))
   CALL h5dread_f(dset_id1, h5kind_to_type(int_kind_8,H5_INTEGER_KIND), f_ptr,  error)
@@ -172,5 +172,5 @@ PROGRAM RWDSET_FORTRAN2003
 
 END PROGRAM RWDSET_FORTRAN2003
 
-               
+
 
diff --git a/fortran/examples/testh5fc.sh.in b/fortran/examples/testh5fc.sh.in
index f384909..200f311 100644
--- a/fortran/examples/testh5fc.sh.in
+++ b/fortran/examples/testh5fc.sh.in
@@ -71,13 +71,13 @@ temp_FILES="a.out $applib"
 # An application Main that calls hdf5 and application's own functions.
 cat > $appmain <<EOF
      PROGRAM FILEEXAMPLE
-     USE HDF5 ! This module contains all necessary modules 
-        
+     USE HDF5 ! This module contains all necessary modules
+
      IMPLICIT NONE
 
      CHARACTER(LEN=8), PARAMETER :: filename = "apptmp.h5" ! File name
      INTEGER(HID_T) :: file_id                            ! File identifier
- 
+
      INTEGER     ::   error  ! Error flag
 
      CALL sub1
@@ -86,7 +86,7 @@ cat > $appmain <<EOF
      CALL h5fclose_f(file_id, error)
      CALL h5close_f(error)
      CALL sub2
-     END PROGRAM FILEEXAMPLE 
+     END PROGRAM FILEEXAMPLE
 EOF
 
 # generate prog1
@@ -107,20 +107,20 @@ EOF
 # An HDF5 sample program that calls hdf5 functions.
 cat > $hdf5main <<EOF
      PROGRAM FILEEXAMPLE
-     USE HDF5 ! This module contains all necessary modules 
-        
+     USE HDF5 ! This module contains all necessary modules
+
      IMPLICIT NONE
 
      CHARACTER(LEN=8), PARAMETER :: filename = "apptmp.h5" ! File name
      INTEGER(HID_T) :: file_id                            ! File identifier
- 
+
      INTEGER     ::   error  ! Error flag
 
      CALL h5open_f (error)
      CALL h5fcreate_f(filename, H5F_ACC_TRUNC_F, file_id, error)
      CALL h5fclose_f(file_id, error)
      CALL h5close_f(error)
-     END PROGRAM FILEEXAMPLE 
+     END PROGRAM FILEEXAMPLE
 EOF
 
 
diff --git a/fortran/src/H5Df.c b/fortran/src/H5Df.c
index 827baa1..8ef7936 100644
--- a/fortran/src/H5Df.c
+++ b/fortran/src/H5Df.c
@@ -1286,16 +1286,16 @@ h5dget_access_plist_c (hid_t_f *dset_id, hid_t_f *plist_id)
  * PURPOSE
  *  Call H5Treclaim
  * INPUTS
- *  type_id   - Identifier of the datatype. 
- *  space_id  - Identifier of the dataspace. 
- *  plist_id  - Identifier of the property list used to create the buffer. 
- *  buf       - Pointer to the buffer to be reclaimed.    
+ *  type_id   - Identifier of the datatype.
+ *  space_id  - Identifier of the dataspace.
+ *  plist_id  - Identifier of the property list used to create the buffer.
+ *  buf       - Pointer to the buffer to be reclaimed.
  *
  * RETURNS
  *  0 on success, -1 on failure
  * AUTHOR
  *   M. Scot Breitenfeld
- *  January 15, 2011 
+ *  January 15, 2011
  *
  * SOURCE
 */
diff --git a/fortran/src/H5Ef.c b/fortran/src/H5Ef.c
index 0a2f2a3..6631d3a 100644
--- a/fortran/src/H5Ef.c
+++ b/fortran/src/H5Ef.c
@@ -164,7 +164,7 @@ h5eget_major_c(int_f* error_no, _fcd name, size_t_f* namelen)
     size_t c_namelen = (size_t)*namelen;
     int_f ret_value = 0;
 
-    if(c_namelen > 0) 
+    if(c_namelen > 0)
         c_name = (char *)HDmalloc(c_namelen + 1);
 
     if(!c_name)
@@ -212,7 +212,7 @@ h5eget_minor_c(int_f* error_no, _fcd name, size_t_f* namelen)
     size_t c_namelen = (size_t)*namelen;
     int_f ret_value = 0;
 
-    if(c_namelen > 0) 
+    if(c_namelen > 0)
         c_name = (char *)HDmalloc(c_namelen + 1);
 
     if(!c_name)
@@ -242,7 +242,7 @@ done:
  *  estack_id   - Error stack identifier.
  *  func 	- Function to be called upon an error condition.
  *  client_data - Data passed to the error function.
- *   
+ *
  * RETURNS
  *  0 on success, -1 on failure
  * AUTHOR
diff --git a/fortran/src/H5Ff.c b/fortran/src/H5Ff.c
index 12fb7ed..7123f1d 100644
--- a/fortran/src/H5Ff.c
+++ b/fortran/src/H5Ff.c
@@ -486,11 +486,11 @@ h5fget_obj_count_c ( hid_t_f *file_id , int_f *obj_type, size_t_f * obj_count)
  *  Changed type of max_obj to size_t_f; added parameter for the
  *  number of open objects
  *  Thursday, September 25, 2008 EIP
- *	
+ *
  * SOURCE
 */
 int_f
-h5fget_obj_ids_c ( hid_t_f *file_id , int_f *obj_type, size_t_f *max_objs, 
+h5fget_obj_ids_c ( hid_t_f *file_id , int_f *obj_type, size_t_f *max_objs,
     hid_t_f *obj_ids, size_t_f *num_objs)
 /******/
 {
@@ -693,7 +693,7 @@ h5fget_file_image_c(hid_t_f *file_id, void *buf_ptr, size_t_f *buf_len, size_t_f
     /*
      * Call h5fget_file_image function
      */
-    
+
     if ( (c_buf_req = H5Fget_file_image((hid_t)*file_id, buf_ptr, (size_t)*buf_len)) < 0)
          HGOTO_DONE(FAIL);
 
diff --git a/fortran/src/H5Lf.c b/fortran/src/H5Lf.c
index b5ff7f2..1fee5e8 100644
--- a/fortran/src/H5Lf.c
+++ b/fortran/src/H5Lf.c
@@ -939,7 +939,7 @@ int_f
 h5lget_val_c(hid_t_f *link_loc_id, _fcd link_name, size_t_f *link_namelen, size_t_f *size,
 	      void *linkval_buff, hid_t_f *lapl_id)
 /******/
-{    
+{
     char *c_link_name = NULL; /* Buffer to hold C string */
     int_f ret_value = 0;       /* Return value */
 
diff --git a/fortran/src/H5Of.c b/fortran/src/H5Of.c
index 9780814..edbfcbe 100644
--- a/fortran/src/H5Of.c
+++ b/fortran/src/H5Of.c
@@ -27,7 +27,7 @@ fill_h5o_info_t_f(H5O_info2_t Oinfo, H5O_info_t_f *object_info);
 int_f
 fill_h5o_info_t_f(H5O_info2_t Oinfo, H5O_info_t_f *object_info) {
 
-  /* This function does not used the field parameter because we want 
+  /* This function does not used the field parameter because we want
    * this function to fill the unfilled fields with C's default values.
    */
 
@@ -184,7 +184,7 @@ h5oopen_c (hid_t_f *loc_id, _fcd name, size_t_f *namelen, hid_t_f *lapl_id, hid_
  * PURPOSE
  *  Call H5Oclose
  * INPUTS
- *  object_id   - Object identifier  
+ *  object_id   - Object identifier
  * RETURNS
  *  0 on success, -1 on failure
  * AUTHOR
@@ -197,10 +197,10 @@ h5oclose_c ( hid_t_f *object_id )
 /******/
 {
   int_f ret_value=0;          /* Return value */
-  
+
   if (H5Oclose((hid_t)*object_id) < 0)
     HGOTO_DONE(FAIL);
-  
+
  done:
   return ret_value;
 }
@@ -312,7 +312,7 @@ h5oget_info_by_name_c (hid_t_f *loc_id, _fcd name, size_t_f *namelen, hid_t_f *l
   char *c_name = NULL;          /* Buffer to hold C string */
   int_f ret_value = 0;          /* Return value */
   H5O_info2_t Oinfo;
-  
+
   /*
    * Convert FORTRAN name to C name
    */
@@ -356,7 +356,7 @@ h5oget_info_by_name_c (hid_t_f *loc_id, _fcd name, size_t_f *namelen, hid_t_f *l
  * SOURCE
 */
 int_f
-h5oget_info_by_idx_c (hid_t_f *loc_id, _fcd  group_name, size_t_f *namelen, 
+h5oget_info_by_idx_c (hid_t_f *loc_id, _fcd  group_name, size_t_f *namelen,
                       int_f *index_field, int_f *order, hsize_t_f *n, hid_t_f *lapl_id, H5O_info_t_f *object_info, int_f *fields)
 /******/
 {
@@ -432,12 +432,12 @@ h5oget_info_c (hid_t_f *object_id, H5O_info_t_f *object_info, int_f *fields)
  *  H5Ocopy_c
  * PURPOSE
  *  Calls H5Ocopy
- * INPUTS  
- *  src_loc_id   - Object identifier indicating the location of the source object to be copied 
- *  src_name     - Name of the source object to be copied 
+ * INPUTS
+ *  src_loc_id   - Object identifier indicating the location of the source object to be copied
+ *  src_name     - Name of the source object to be copied
  *  src_name_len - Length of src_name
- *  dst_loc_id   - Location identifier specifying the destination 
- *  dst_name     - Name to be assigned to the new copy 
+ *  dst_loc_id   - Location identifier specifying the destination
+ *  dst_name     - Name to be assigned to the new copy
  *  dst_name_len - Length of dst_name
  *  ocpypl_id    - Object copy property list
  *  lcpl_id      - Link creation property list for the new hard link
@@ -451,15 +451,15 @@ h5oget_info_c (hid_t_f *object_id, H5O_info_t_f *object_info, int_f *fields)
 */
 int_f
 h5ocopy_c (hid_t_f *src_loc_id, _fcd src_name, size_t_f *src_name_len,
-           hid_t_f *dst_loc_id, _fcd dst_name, size_t_f *dst_name_len, 
+           hid_t_f *dst_loc_id, _fcd dst_name, size_t_f *dst_name_len,
            hid_t_f *ocpypl_id, hid_t_f *lcpl_id )
 /******/
 {
   char *c_src_name = NULL;  /* Buffer to hold C string */
   char *c_dst_name = NULL;  /* Buffer to hold C string */
-  
+
   int_f ret_value = 0;      /* Return value */
-  
+
   /*
    * Convert FORTRAN name to C name
    */
@@ -471,7 +471,7 @@ h5ocopy_c (hid_t_f *src_loc_id, _fcd src_name, size_t_f *src_name_len,
   /*
    * Call H5Ocopy function.
    */
-  if(H5Ocopy( (hid_t)*src_loc_id, c_src_name, (hid_t)*dst_loc_id, c_dst_name, 
+  if(H5Ocopy( (hid_t)*src_loc_id, c_src_name, (hid_t)*dst_loc_id, c_dst_name,
               (hid_t)*ocpypl_id, (hid_t)*lcpl_id) < 0)
     HGOTO_DONE(FAIL);
 
@@ -689,8 +689,8 @@ h5oset_comment_c (hid_t_f *object_id, _fcd comment, size_t_f *commentlen)
  *  Calls H5Oset_comment_by_name
  * INPUTS
  *  object_id  - Identifier of the target object.
- *  name       - Name of the object whose comment is to be set or reset, 
- *  specified as a path relative to loc_id. 
+ *  name       - Name of the object whose comment is to be set or reset,
+ *  specified as a path relative to loc_id.
  *  namelen    - Length of the name.
  *  comment    - The new comment.
  *  commentlen - Length of the comment.
@@ -757,7 +757,7 @@ h5oset_comment_by_name_c (hid_t_f *object_id, _fcd name, size_t_f *namelen,  _fc
  * SOURCE
 */
 int_f
-h5oopen_by_idx_c (hid_t_f *loc_id, _fcd  group_name, size_t_f *group_namelen, 
+h5oopen_by_idx_c (hid_t_f *loc_id, _fcd  group_name, size_t_f *group_namelen,
                   int_f *index_type, int_f *order, hsize_t_f *n, hid_t_f *obj_id, hid_t_f *lapl_id)
 /******/
 {
@@ -765,7 +765,7 @@ h5oopen_by_idx_c (hid_t_f *loc_id, _fcd  group_name, size_t_f *group_namelen,
   int_f ret_value = 0;
   H5_index_t c_index_type;
   H5_iter_order_t c_order;
-  
+
   /*
    * Convert FORTRAN string to C string
    */
@@ -818,13 +818,13 @@ h5oget_comment_c (hid_t_f *object_id, _fcd comment, size_t_f *commentsize,  hssi
   /*
    * Allocate buffer to hold comment name
    */
-  
+
   if(NULL == (c_comment = (char *)HDmalloc(c_commentsize)))
     HGOTO_DONE(FAIL);
 
   /*
    * Call H5Oget_comment function.
-   */ 
+   */
 
   if((*bufsize = (hssize_t_f)H5Oget_comment((hid_t)*object_id, c_comment, (size_t)*commentsize)) < 0)
     HGOTO_DONE(FAIL);
@@ -862,7 +862,7 @@ h5oget_comment_c (hid_t_f *object_id, _fcd comment, size_t_f *commentsize,  hssi
  * SOURCE
 */
 int_f
-h5oget_comment_by_name_c (hid_t_f *loc_id, _fcd name, size_t_f *name_size, 
+h5oget_comment_by_name_c (hid_t_f *loc_id, _fcd name, size_t_f *name_size,
                           _fcd comment, size_t_f *commentsize, size_t_f *bufsize, hid_t_f *lapl_id)
 /******/
 {
@@ -883,13 +883,13 @@ h5oget_comment_by_name_c (hid_t_f *loc_id, _fcd name, size_t_f *name_size,
   /*
    * Allocate buffer to hold comment name
    */
-  
+
   if(NULL == (c_comment = (char *)HDmalloc(c_commentsize)))
     HGOTO_DONE(FAIL);
 
   /*
    * Call H5Oget_comment_by_name function.
-   */ 
+   */
 
   if((c_bufsize = H5Oget_comment_by_name((hid_t)*loc_id, c_name, c_comment, (size_t)*commentsize,(hid_t)*lapl_id )) < 0)
     HGOTO_DONE(FAIL);
diff --git a/fortran/src/H5Pf.c b/fortran/src/H5Pf.c
index a931903..7cb3db8 100644
--- a/fortran/src/H5Pf.c
+++ b/fortran/src/H5Pf.c
@@ -1831,7 +1831,7 @@ DONE:
  *  Wednesday, February 23, 2000
  * HISTORY
  *  Changed type of 'offset' from int_f to off_t_f -- MSB January 9, 2012
- *  
+ *
  * SOURCE
 */
 int_f
@@ -3153,7 +3153,7 @@ h5pget_class_name_c(hid_t_f *cls, _fcd name, int_f *name_len)
      char *c_name;
 
      /*
-      * Call H5Pget_class_name function. c_name is allocated by the library, 
+      * Call H5Pget_class_name function. c_name is allocated by the library,
       * has to be freed by application.
       */
      if(NULL == (c_name = H5Pget_class_name((hid_t)*cls)))
@@ -3216,7 +3216,7 @@ DONE:
  *  plist   - property list class identifier
  *  name     - name of the new property
  *  name_len - length of the "name" buffer
- *  Output:  
+ *  Output:
  *  value - property value
  * RETURNS
  *  0 on success, -1 on failure
@@ -5177,7 +5177,7 @@ h5pget_chunk_cache_c(hid_t_f *dapl_id, size_t_f *rdcc_nslots, size_t_f *rdcc_nby
  *
  *  Inputs:
  *  fapl_id - File access property list identifier
- *  buf_ptr - Pointer to the initial file image, 
+ *  buf_ptr - Pointer to the initial file image,
  *  or NULL if no initial file image is desired
  *  buf_len - Size of the supplied buffer, or 0 (zero) if no initial image is desired
  *
@@ -5207,7 +5207,7 @@ h5pset_file_image_c(hid_t_f *fapl_id, void *buf_ptr, size_t_f *buf_len)
  *  Inputs:
  *  fapl_id - File access property list identifier
  *  Outputs:
- *  buf_ptr - Pointer to the initial file image, 
+ *  buf_ptr - Pointer to the initial file image,
  *  or NULL if no initial file image is desired
  *  buf_len - Size of the supplied buffer, or 0 (zero) if no initial image is desired
  *
diff --git a/fortran/src/H5Rf.c b/fortran/src/H5Rf.c
index 6a3181f..df2ded4 100644
--- a/fortran/src/H5Rf.c
+++ b/fortran/src/H5Rf.c
@@ -351,7 +351,7 @@ h5rget_name_ptr_c (hid_t_f *loc_id, int_f *ref_type, void *ref, _fcd name, size_
  * OUTPUTS
  *  obj_type - Type of referenced object. These are defined in H5Opublic.h,
  *  enum H5O_type_t
- *              
+ *
  * RETURNS
  *  0 on success, -1 on failure
  * AUTHOR
diff --git a/fortran/src/H5_f.c b/fortran/src/H5_f.c
index ced5049..8044b78 100644
--- a/fortran/src/H5_f.c
+++ b/fortran/src/H5_f.c
@@ -101,7 +101,7 @@ h5init_types_c( hid_t_f * types, hid_t_f * floatingtypes, hid_t_f * integertypes
       if (sizeof(int_f) == sizeof(long long)) {
 	if ((types[5] = (hid_t_f)H5Tcopy(H5T_NATIVE_LLONG)) < 0) return ret_value;
     } /*end else */
-    
+
     /* Find appropriate size to store Fortran REAL */
     if(sizeof(real_f)==sizeof(float)) {
       if ((types[6] = (hid_t_f)H5Tcopy(H5T_NATIVE_FLOAT)) < 0) return ret_value;
@@ -230,7 +230,7 @@ h5init_types_c( hid_t_f * types, hid_t_f * floatingtypes, hid_t_f * integertypes
     if ((integertypes[12] = (hid_t_f)H5Tcopy(H5T_STD_U32BE)) < 0) return ret_value;
     if ((integertypes[13] = (hid_t_f)H5Tcopy(H5T_STD_U32LE)) < 0) return ret_value;
     if ((integertypes[14] = (hid_t_f)H5Tcopy(H5T_STD_U64BE)) < 0) return ret_value;
-    if ((integertypes[15] = (hid_t_f)H5Tcopy(H5T_STD_U64LE)) < 0) return ret_value;	
+    if ((integertypes[15] = (hid_t_f)H5Tcopy(H5T_STD_U64LE)) < 0) return ret_value;
     if ((integertypes[17] = (hid_t_f)H5Tcopy(H5T_STD_B8BE)) < 0) return ret_value;
     if ((integertypes[18] = (hid_t_f)H5Tcopy(H5T_STD_B8LE)) < 0) return ret_value;
     if ((integertypes[19] = (hid_t_f)H5Tcopy(H5T_STD_B16BE)) < 0) return ret_value;
@@ -359,12 +359,12 @@ h5close_types_c( hid_t_f * types, int_f *lentypes,
  * SOURCE
  */
 int_f
-h5init_flags_c( int_f *h5d_flags, size_t_f *h5d_size_flags, 
+h5init_flags_c( int_f *h5d_flags, size_t_f *h5d_size_flags,
 		int_f *h5e_flags, hid_t_f *h5e_hid_flags, int_f *h5f_flags,
                 int_f *h5fd_flags, hid_t_f *h5fd_hid_flags,
                 int_f *h5g_flags, int_f *h5i_flags, int_f *h5l_flags, int_f *h5o_flags,
-                hid_t_f *h5p_flags, int_f *h5p_flags_int, int_f *h5r_flags, 
-                int_f *h5s_flags, hid_t_f *h5s_hid_flags, hsize_t_f *h5s_hsize_flags, 
+                hid_t_f *h5p_flags, int_f *h5p_flags_int, int_f *h5r_flags,
+                int_f *h5s_flags, hid_t_f *h5s_hid_flags, hsize_t_f *h5s_hsize_flags,
 		int_f *h5t_flags, int_f *h5z_flags, int_f *h5_generic_flags,
                 haddr_t_f *h5_haddr_generic_flags)
 /******/
diff --git a/fortran/src/H5config_f.inc.in b/fortran/src/H5config_f.inc.in
index 8921493..71eb936 100644
--- a/fortran/src/H5config_f.inc.in
+++ b/fortran/src/H5config_f.inc.in
@@ -12,7 +12,7 @@
 ! fortran/src/H5config_f.inc. Generated from fortran/src/H5config_f.inc.in by configure
 
 ! The script to replace the defines in H5config_f.inc.in is
-! located in configure.ac in the Fortran section. 
+! located in configure.ac in the Fortran section.
 
 ! Define if we have parallel support
 #undef HAVE_PARALLEL
@@ -47,7 +47,7 @@
 ! If C has quad precision
 #undef HAVE_FLOAT128
 
-! Define if INTEGER*16 is available 
+! Define if INTEGER*16 is available
 #undef HAVE_Fortran_INTEGER_SIZEOF_16
 
 ! Maximum decimal precision for C
diff --git a/fortran/src/H5f90proto.h b/fortran/src/H5f90proto.h
index fe616d3..695efcd 100644
--- a/fortran/src/H5f90proto.h
+++ b/fortran/src/H5f90proto.h
@@ -160,9 +160,9 @@ H5_FCDLL int_f h5dfill_c(void * fill_value, hid_t_f *fill_type_id, hid_t_f *spac
 H5_FCDLL int_f h5dget_space_status_c( hid_t_f *dset_id, int_f *flag);
 H5_FCDLL int_f h5dcreate_anon_c(hid_t_f *loc_id, hid_t_f *type_id, hid_t_f *space_id,
 				  hid_t_f *dcpl_id, hid_t_f *dapl_id, hid_t_f *dset_id);
-H5_FCDLL int_f h5dwrite_f_c(hid_t_f *dset_id, hid_t_f *mem_type_id, hid_t_f *mem_space_id, 
+H5_FCDLL int_f h5dwrite_f_c(hid_t_f *dset_id, hid_t_f *mem_type_id, hid_t_f *mem_space_id,
 				   hid_t_f *file_space_id, hid_t_f *xfer_prp, void *buf);
-H5_FCDLL int_f h5dread_f_c( hid_t_f *dset_id ,  hid_t_f *mem_type_id, hid_t_f *mem_space_id, 
+H5_FCDLL int_f h5dread_f_c( hid_t_f *dset_id ,  hid_t_f *mem_type_id, hid_t_f *mem_space_id,
 				   hid_t_f *file_space_id, hid_t_f *xfer_prp, void *buf);
 H5_FCDLL int_f h5dvlen_reclaim_c(hid_t_f *type_id ,  hid_t_f *space_id, hid_t_f *plist_id, void *buf);
 
@@ -323,22 +323,22 @@ H5_FCDLL int_f h5ovisit_c(hid_t_f *group_id, int_f *index_type, int_f *order, H5
 H5_FCDLL int_f h5ovisit_by_name_c(hid_t_f *loc_id,  _fcd object_name, size_t_f *namelen, int_f *index_type, int_f *order,
 				   H5O_iterate2_t op, void *op_data, hid_t_f *lapl_id, int_f *fields );
 H5_FCDLL int_f h5oget_info_c(hid_t_f *object_id, H5O_info_t_f *object_info, int_f *fields);
-H5_FCDLL int_f h5oget_info_by_idx_c(hid_t_f *loc_id, _fcd  group_name, size_t_f *namelen, 
+H5_FCDLL int_f h5oget_info_by_idx_c(hid_t_f *loc_id, _fcd  group_name, size_t_f *namelen,
 				      int_f *index_field, int_f *order, hsize_t_f *n, hid_t_f *lapl_id, H5O_info_t_f *object_info, int_f *fields);
 H5_FCDLL int_f h5oget_info_by_name_c(hid_t_f *loc_id, _fcd name, size_t_f *namelen, hid_t_f *lapl_id,
 				       H5O_info_t_f *object_info, int_f *fields);
 H5_FCDLL int_f h5ocopy_c(hid_t_f *src_loc_id, _fcd src_name, size_t_f *src_name_len,
-			   hid_t_f *dst_loc_id, _fcd dst_name, size_t_f *dst_name_len, 
+			   hid_t_f *dst_loc_id, _fcd dst_name, size_t_f *dst_name_len,
 			   hid_t_f *ocpypl_id, hid_t_f *lcpl_id );
 H5_FCDLL int_f h5odecr_refcount_c(hid_t_f *object_id);
 H5_FCDLL int_f h5oincr_refcount_c(hid_t_f *object_id);
 H5_FCDLL int_f h5oexists_by_name_c(hid_t_f *loc_id, _fcd name, size_t_f *namelen, hid_t_f *lapl_id);
 H5_FCDLL int_f h5oset_comment_c(hid_t_f *object_id, _fcd comment, size_t_f *commentlen);
 H5_FCDLL int_f h5oset_comment_by_name_c(hid_t_f *object_id, _fcd name, size_t_f *namelen,  _fcd comment, size_t_f *commentlen, hid_t_f *lapl_id);
-H5_FCDLL int_f h5oopen_by_idx_c(hid_t_f *loc_id, _fcd  group_name, size_t_f *group_namelen, 
+H5_FCDLL int_f h5oopen_by_idx_c(hid_t_f *loc_id, _fcd  group_name, size_t_f *group_namelen,
 				      int_f *index_type, int_f *order, hsize_t_f *n, hid_t_f *obj_id, hid_t_f *lapl_id);
 H5_FCDLL int_f h5oget_comment_c(hid_t_f *object_id, _fcd comment, size_t_f *commentsize, hssize_t_f *bufsize);
-H5_FCDLL int_f h5oget_comment_by_name_c(hid_t_f *loc_id, _fcd name, size_t_f *name_size, 
+H5_FCDLL int_f h5oget_comment_by_name_c(hid_t_f *loc_id, _fcd name, size_t_f *name_size,
 					  _fcd comment, size_t_f *commentsize, size_t_f *bufsize, hid_t_f *lapl_id);
 H5_FCDLL int_f h5otoken_cmp_c(hid_t_f *loc_id, H5O_token_t *token1,
                                 H5O_token_t *token2, int_f *cmp_value);
@@ -528,12 +528,12 @@ H5_FCDLL int_f h5open_c(void);
 H5_FCDLL int_f h5close_c(void);
 H5_FCDLL int_f h5init_types_c(hid_t_f *types, hid_t_f *floatingtypes, hid_t_f *integertypes);
 H5_FCDLL int_f h5close_types_c(hid_t_f *types, int_f *lentypes, hid_t_f *floatingtypes, int_f *floatinglen, hid_t_f *integertypes, int_f *integerlen);
-H5_FCDLL int_f h5init_flags_c( int_f *h5d_flags, size_t_f *h5d_size_flags, 
+H5_FCDLL int_f h5init_flags_c( int_f *h5d_flags, size_t_f *h5d_size_flags,
 		int_f *h5e_flags, hid_t_f *h5e_hid_flags, int_f *h5f_flags,
                 int_f *h5fd_flags, hid_t_f *h5fd_hid_flags,
                 int_f *h5g_flags, int_f *h5i_flags, int_f *h5l_flags, int_f *h5o_flags,
-                hid_t_f *h5p_flags, int_f *h5p_flags_int, int_f *h5r_flags, 
-                int_f *h5s_flags, hid_t_f *h5s_hid_flags, hsize_t_f *h5s_hsize_flags, 
+                hid_t_f *h5p_flags, int_f *h5p_flags_int, int_f *h5r_flags,
+                int_f *h5s_flags, hid_t_f *h5s_hid_flags, hsize_t_f *h5s_hsize_flags,
 		int_f *h5t_flags, int_f *h5z_flags, int_f *h5_generic_flags,
                 haddr_t_f *h5_haddr_generic_flags);
 H5_FCDLL int_f h5init1_flags_c(int_f *h5lib_flags);
diff --git a/fortran/src/H5match_types.c b/fortran/src/H5match_types.c
index ec2d66f..231b90d 100644
--- a/fortran/src/H5match_types.c
+++ b/fortran/src/H5match_types.c
@@ -150,7 +150,7 @@ int main(void)
   int RealKinds[] = H5_FORTRAN_REAL_KINDS;
   int RealKinds_SizeOf[] = H5_FORTRAN_REAL_KINDS_SIZEOF;
   char Real_C_TYPES[10][32];
-  
+
   int FORTRAN_NUM_INTEGER_KINDS=H5_FORTRAN_NUM_INTEGER_KINDS;
   int H5_FORTRAN_NUM_REAL_KINDS;
 #if H5_FORTRAN_HAVE_C_LONG_DOUBLE!=0
@@ -208,13 +208,13 @@ int main(void)
     }
     else if(sizeof(double) == RealKinds_SizeOf[i]) {
       writeTypedef("float", "double", RealKinds[i]);
-      strcpy(Real_C_TYPES[i], "C_DOUBLE"); 
+      strcpy(Real_C_TYPES[i], "C_DOUBLE");
     }
 #if H5_FORTRAN_HAVE_C_LONG_DOUBLE!=0
     else if(sizeof(long double) == RealKinds_SizeOf[i] && found_long_double == 0) {
       writeTypedef("float", "long double", RealKinds[i]);
       strcpy(Real_C_TYPES[i], "C_LONG_DOUBLE");
-      found_long_double = 1; 
+      found_long_double = 1;
     }
 #  ifdef H5_HAVE_FLOAT128
     /* Don't select a higher precision than Fortran can support */
@@ -329,7 +329,7 @@ int main(void)
 /* Defined different KINDs of integers */
 
   fprintf(fort_header,"        INTEGER, DIMENSION(1:%d), PARAMETER :: Fortran_INTEGER_AVAIL_KINDS = (/", FORTRAN_NUM_INTEGER_KINDS);
-  
+
   for(i=0;i<FORTRAN_NUM_INTEGER_KINDS;i++) {
     fprintf(fort_header,"%d",(int)IntKinds[i]);
     if(i==FORTRAN_NUM_INTEGER_KINDS-1) {
@@ -337,7 +337,7 @@ int main(void)
     } else {
       fprintf(fort_header,",");
     }
-    
+
   }
 
   /* real_4, real_8, real_16 */
diff --git a/fortran/src/Makefile.am b/fortran/src/Makefile.am
index 4009439..f8ef02b 100644
--- a/fortran/src/Makefile.am
+++ b/fortran/src/Makefile.am
@@ -48,7 +48,7 @@ libhdf5_fortran_la_SOURCES=H5f90global.F90 \
           H5f90kit.c H5_f.c H5Af.c H5Df.c H5Ef.c H5Ff.c H5Gf.c           \
           H5If.c H5Lf.c H5Of.c H5Pf.c H5Rf.c H5Sf.c H5Tf.c H5Zf.c HDF5.F90
 
-# HDF5 Fortran library depends on HDF5 Library. 
+# HDF5 Fortran library depends on HDF5 Library.
 libhdf5_fortran_la_LIBADD=$(LIBHDF5)
 
 # h5fc is generated during configure.
diff --git a/fortran/src/h5fc.in b/fortran/src/h5fc.in
index 29ef83f..080f7ff 100644
--- a/fortran/src/h5fc.in
+++ b/fortran/src/h5fc.in
@@ -75,12 +75,12 @@ SHOW="eval"
 FCBASE="@FC@"
 FLINKERBASE="@FC@"
 
-# FCFLAGS and LDFLAGS are reserved for use by the script user.  
+# FCFLAGS and LDFLAGS are reserved for use by the script user.
 # FLAGS brought from the hdf5 build are put in H5BLD_*FLAGS.
 
-# User's FCFLAGS come after their H5BLD counterparts. User's LDFLAGS come just 
-# before clibpath, user's LIBS come after $link_objs and before the hdf5 
-# libraries in $link_args, followed by any external library paths and libraries 
+# User's FCFLAGS come after their H5BLD counterparts. User's LDFLAGS come just
+# before clibpath, user's LIBS come after $link_objs and before the hdf5
+# libraries in $link_args, followed by any external library paths and libraries
 # from AM_LDFLAGS, LDFLAGS, AM_LIBS or LIBS carried in from the hdf5 build.
 # The order of the flags is intended to give precedence to the user's flags.
 H5BLD_FCFLAGS="@AM_FCFLAGS@ @FCFLAGS@"
@@ -358,9 +358,9 @@ if test "x$do_link" = "xyes"; then
   # module. It's okay if they're included twice in the compile line.
   link_args="$link_args $H5BLD_LDFLAGS $H5BLD_LIBS"
 
-  # User's FCFLAGS come after their H5BLD counterparts. User's LDFLAGS come just 
-  # before clibpath, user's LIBS come after $link_objs and before the hdf5 
-  # libraries in $link_args, followed by any external library paths and libraries 
+  # User's FCFLAGS come after their H5BLD counterparts. User's LDFLAGS come just
+  # before clibpath, user's LIBS come after $link_objs and before the hdf5
+  # libraries in $link_args, followed by any external library paths and libraries
   # from AM_LDFLAGS, LDFLAGS, AM_LIBS or LIBS carried in from the hdf5 build.
   # The order of the flags is intended to give precedence to the user's flags.
   $SHOW $FLINKER $FCFLAGS $H5BLD_FCFLAGS $F9XSUFFIXFLAG $LDFLAGS $fmodules $link_objs $LIBS $link_args $shared_link
diff --git a/fortran/test/Makefile.am b/fortran/test/Makefile.am
index f0d7f03..0236e19 100644
--- a/fortran/test/Makefile.am
+++ b/fortran/test/Makefile.am
@@ -91,7 +91,7 @@ tf_gen.F90: H5_test_buildiface$(EXEEXT)
 
 H5_test_buildiface_SOURCES = H5_test_buildiface.F90
 
-# The build of the H5_test_buildiface does not depend on any libraries, so set it 
+# The build of the H5_test_buildiface does not depend on any libraries, so set it
 # to nothing.
 
 H5_test_buildiface_LDADD =
diff --git a/fortran/testpar/hyper.f90 b/fortran/testpar/hyper.f90
index c07636f..605d69b 100644
--- a/fortran/testpar/hyper.f90
+++ b/fortran/testpar/hyper.f90
@@ -135,7 +135,7 @@ SUBROUTINE hyper(length,do_collective,do_chunk, mpi_size, mpi_rank, nerrors)
      ! Collective metadata READ API calling requirement
      CALL h5pset_all_coll_metadata_ops_f(fapl_id, is_coll_true, hdferror)
      CALL check("h5pset_all_coll_metadata_ops_f", hdferror, nerrors)
-   
+
      CALL h5fcreate_f(filename, H5F_ACC_TRUNC_F, file_id, hdferror, access_prp = fapl_id)
      CALL check("h5fcreate_f", hdferror, nerrors)
 
@@ -144,7 +144,7 @@ SUBROUTINE hyper(length,do_collective,do_chunk, mpi_size, mpi_rank, nerrors)
      CALL check("h5pclose_f", hdferror, nerrors)
      CALL h5fget_access_plist_f(file_id, fapl_id, hdferror)
      CALL check("h5fget_access_plist_f", hdferror, nerrors)
-    
+
      ! verify settings for file access properties
 
      ! Collective metadata writes
diff --git a/fortran/testpar/ptest.f90 b/fortran/testpar/ptest.f90
index 3b07f21..0721244 100644
--- a/fortran/testpar/ptest.f90
+++ b/fortran/testpar/ptest.f90
@@ -18,8 +18,8 @@
 PROGRAM parallel_test
   USE HDF5
   USE MPI
-  USE TH5_MISC 
-  
+  USE TH5_MISC
+
   IMPLICIT NONE
 
   INTEGER :: mpierror                             ! MPI hdferror flag
diff --git a/hl/Makefile.am b/hl/Makefile.am
index ded7aa0..0bf8dac 100644
--- a/hl/Makefile.am
+++ b/hl/Makefile.am
@@ -10,7 +10,7 @@
 # If you do not have access to either file, you may request a copy from
 # help@hdfgroup.org.
 #
-# 
+#
 # This makefile mostly just reinvokes make in the various subdirectories
 # but does so in the correct order.  You can alternatively invoke make from
 # each subdirectory manually.
diff --git a/hl/c++/Makefile.am b/hl/c++/Makefile.am
index f9ea328..6239a4c 100644
--- a/hl/c++/Makefile.am
+++ b/hl/c++/Makefile.am
@@ -14,7 +14,7 @@
 ## Run automake to generate a Makefile.in from this file.
 #
 # High-Level API C++ Makefile(.in)
-# 
+#
 
 include $(top_srcdir)/config/commence.am
 
diff --git a/hl/c++/examples/run-hlc++-ex.sh.in b/hl/c++/examples/run-hlc++-ex.sh.in
index 43831f5..4aa231f 100644
--- a/hl/c++/examples/run-hlc++-ex.sh.in
+++ b/hl/c++/examples/run-hlc++-ex.sh.in
@@ -98,5 +98,5 @@ rm *.o
 rm *.h5
 echo
 
-exit $EXIT_VALUE 
+exit $EXIT_VALUE
 
diff --git a/hl/examples/run-hlc-ex.sh.in b/hl/examples/run-hlc-ex.sh.in
index e6d0cc9..f2eec5d 100644
--- a/hl/examples/run-hlc-ex.sh.in
+++ b/hl/examples/run-hlc-ex.sh.in
@@ -138,5 +138,5 @@ rm *.o
 rm *.h5
 echo
 
-exit $EXIT_VALUE 
+exit $EXIT_VALUE
 
diff --git a/hl/fortran/Makefile.am b/hl/fortran/Makefile.am
index 7d24770..801702c 100644
--- a/hl/fortran/Makefile.am
+++ b/hl/fortran/Makefile.am
@@ -10,7 +10,7 @@
 # If you do not have access to either file, you may request a copy from
 # help@hdfgroup.org.
 #
-# 
+#
 # This makefile mostly just reinvokes make in the various subdirectories
 # but does so in the correct order.  You can alternatively invoke make from
 # each subdirectory manually.
diff --git a/hl/fortran/examples/ex_ds1.f90 b/hl/fortran/examples/ex_ds1.f90
index 14e2b0c..b31ac8e 100644
--- a/hl/fortran/examples/ex_ds1.f90
+++ b/hl/fortran/examples/ex_ds1.f90
@@ -18,7 +18,7 @@ PROGRAM example_ds
 
   IMPLICIT NONE
 
-  INTEGER, PARAMETER :: RANK      = 2 ! rank of DATA dataset 
+  INTEGER, PARAMETER :: RANK      = 2 ! rank of DATA dataset
   INTEGER, PARAMETER :: DIM_DATA  = 12
   INTEGER, PARAMETER :: DIM1_SIZE = 3
   INTEGER, PARAMETER :: DIM2_SIZE = 4
@@ -33,13 +33,13 @@ PROGRAM example_ds
   INTEGER(hid_t) :: fid    ! file ID
   INTEGER(hid_t) :: did    ! dataset ID
   INTEGER(hid_t) :: dsid   ! DS dataset ID
-  INTEGER :: rankds = 1    ! rank of DS dataset 
-  INTEGER(hsize_t), DIMENSION(1:rank) ::  dims  = (/DIM2_SIZE,DIM1_SIZE/) ! size of data dataset 
-  INTEGER, DIMENSION(1:DIM_DATA) :: buf = (/1,2,3,4,5,6,7,8,9,10,11,12/)  ! data of data dataset 
-  INTEGER(hsize_t), DIMENSION(1:1) ::  s1_dim  = (/DIM1_SIZE/)  ! size of DS 1 dataset 
-  INTEGER(hsize_t), DIMENSION(1:1) ::  s2_dim  = (/DIM2_SIZE/)  ! size of DS 2 dataset 
-  REAL, DIMENSION(1:DIM1_SIZE) :: s1_wbuf = (/10,20,30/)     ! data of DS 1 dataset 
-  REAL, DIMENSION(1:DIM2_SIZE) :: s2_wbuf = (/10,20,50,100/) ! data of DS 2 dataset 
+  INTEGER :: rankds = 1    ! rank of DS dataset
+  INTEGER(hsize_t), DIMENSION(1:rank) ::  dims  = (/DIM2_SIZE,DIM1_SIZE/) ! size of data dataset
+  INTEGER, DIMENSION(1:DIM_DATA) :: buf = (/1,2,3,4,5,6,7,8,9,10,11,12/)  ! data of data dataset
+  INTEGER(hsize_t), DIMENSION(1:1) ::  s1_dim  = (/DIM1_SIZE/)  ! size of DS 1 dataset
+  INTEGER(hsize_t), DIMENSION(1:1) ::  s2_dim  = (/DIM2_SIZE/)  ! size of DS 2 dataset
+  REAL, DIMENSION(1:DIM1_SIZE) :: s1_wbuf = (/10,20,30/)     ! data of DS 1 dataset
+  REAL, DIMENSION(1:DIM2_SIZE) :: s2_wbuf = (/10,20,50,100/) ! data of DS 2 dataset
   INTEGER :: err
   INTEGER :: num_scales
   INTEGER(size_t) :: name_len
@@ -56,7 +56,7 @@ PROGRAM example_ds
   ! create a file using default properties
   CALL H5Fcreate_f("ex_ds1.h5",H5F_ACC_TRUNC_F, fid, err)
 
-  ! make a dataset 
+  ! make a dataset
   CALL H5LTmake_dataset_int_f(fid, DSET_NAME, rank,dims,buf, err)
 
   ! make a DS dataset for the first dimension
@@ -69,7 +69,7 @@ PROGRAM example_ds
   ! attach the DS_1_NAME dimension scale to DSET_NAME at dimension 1
   ! and then detach it.
   !-------------------------------------------------------------------------
- 
+
   ! get the dataset id for DSET_NAME
   CALL H5Dopen_f(fid, DSET_NAME, did, err)
 
@@ -82,11 +82,11 @@ PROGRAM example_ds
   ! attach the DS_1_NAME dimension scale to DSET_NAME at dimension index 1
   CALL H5DSattach_scale_f(did, dsid, DIM1, err)
 
-  ! Test if dimension Scale Attached 
+  ! Test if dimension Scale Attached
   CALL H5DSis_attached_f(did, dsid, DIM1, is_attached, err)
   WRITE(*,'(/,5X,3(A,1X),I0,A,L1)') 'Is',TRIM(DS_1_NAME),&
        'attached to dimension',DIM1,' ... ',is_attached
-  
+
 
   ! Check to see how many Dimension Scales are attached
 
@@ -103,11 +103,11 @@ PROGRAM example_ds
   CALL H5DSis_attached_f(did, dsid, DIM1, is_attached, err)
   WRITE(*,'(/,5X,3(A,1X),I0,A,L1)') 'Is',TRIM(DS_1_NAME),&
        'attached to dimension',DIM1,' ... ',is_attached
-  
+
   !-------------------------------------------------------------------------
   ! set the DS_1_NAME dimension scale to DSET_NAME at dimension 1
   !-------------------------------------------------------------------------
- 
+
   WRITE(*,'(/,5A,I0)') &
        'Set Dimension Scale "', TRIM(DS_1_NAME), '" to "', TRIM(DSET_NAME), '" at dimension ', DIM1
 
@@ -123,11 +123,11 @@ PROGRAM example_ds
   name = ''
   CALL H5DSget_scale_name_f(dsid, name, name_len, err)
 
-  WRITE(*,'(/,5X,A,A)') 'The Dimension Scale name is ... ', name(1:name_len) 
+  WRITE(*,'(/,5X,A,A)') 'The Dimension Scale name is ... ', name(1:name_len)
 
   ! Setting Dimension Scale Label
 
-  WRITE(*,'(/,A,I0)') "Setting Dimension Scale label ""X"" for dimension ", DIM1 
+  WRITE(*,'(/,A,I0)') "Setting Dimension Scale label ""X"" for dimension ", DIM1
 
   CALL H5DSset_label_f(did, DIM1, "X", err)
 
@@ -139,11 +139,11 @@ PROGRAM example_ds
 
   ! close DS id
   CALL H5Dclose_f(dsid, err)
-  
+
   !-------------------------------------------------------------------------
   ! attach the DS_2_NAME dimension scale to DSET_NAME
   !-------------------------------------------------------------------------
- 
+
   ! get the DS dataset id
   CALL H5Dopen_f(fid, DS_2_NAME, dsid, err)
 
@@ -163,7 +163,7 @@ PROGRAM example_ds
   name = ''
   CALL H5DSget_scale_name_f(dsid, name(1:name_len), name_len, err)
 
-  WRITE(*,'(/,5X,A,A)') 'The Dimension Scale name is ... ', name(1:name_len) 
+  WRITE(*,'(/,5X,A,A)') 'The Dimension Scale name is ... ', name(1:name_len)
 
 
   ! Setting Dimension Scale Label
@@ -177,13 +177,13 @@ PROGRAM example_ds
   label_len = 25
   label = ''
   CALL H5DSget_label_f(did, DIM2, label, label_len, err)
-  
+
   WRITE(*,'(/,5X,A,I0,2A,/)') 'Dimension Scale Label for dimension ', DIM2, ' is ... ', label(1:label_len)
 
  ! close DS id
   CALL H5Dclose_f(dsid, err)
 
- ! close file 
+ ! close file
   CALL H5Fclose_f(fid, err)
 
 END PROGRAM example_ds
diff --git a/hl/fortran/examples/run-hlfortran-ex.sh.in b/hl/fortran/examples/run-hlfortran-ex.sh.in
index d7de8e3..86acd27 100644
--- a/hl/fortran/examples/run-hlfortran-ex.sh.in
+++ b/hl/fortran/examples/run-hlfortran-ex.sh.in
@@ -80,5 +80,5 @@ rm *.o
 rm *.h5
 echo
 
-exit $EXIT_VALUE 
+exit $EXIT_VALUE
 
diff --git a/hl/fortran/src/H5DSfc.c b/hl/fortran/src/H5DSfc.c
index 0bb594d..f99fa4d 100644
--- a/hl/fortran/src/H5DSfc.c
+++ b/hl/fortran/src/H5DSfc.c
@@ -33,15 +33,15 @@
 *-------------------------------------------------------------------------
 */
 int_f
-h5dsset_scale_c(hid_t_f *dsid, _fcd dimname, size_t_f *dimnamelen) 
+h5dsset_scale_c(hid_t_f *dsid, _fcd dimname, size_t_f *dimnamelen)
 {
   char *c_dimname = NULL;
   int_f ret_value = 0;
-  
+
   /*
    * convert FORTRAN name to C name
    */
-  
+
   if(*dimnamelen != 0)
     if(NULL == (c_dimname = (char *)HD5f2cstring(dimname, (size_t)*dimnamelen)))
       HGOTO_DONE(FAIL)
@@ -78,17 +78,17 @@ h5dsset_scale_c(hid_t_f *dsid, _fcd dimname, size_t_f *dimnamelen)
 *-------------------------------------------------------------------------
 */
 int_f
-h5dsattach_scale_c( hid_t_f *did, hid_t_f *dsid, int_f *idx) 
+h5dsattach_scale_c( hid_t_f *did, hid_t_f *dsid, int_f *idx)
 {
   int_f ret_value = 0;
-  
+
   /*
    * call H5DSset_scale function.
    */
-  
+
   if(H5DSattach_scale( (hid_t)*did, (hid_t)*dsid, (unsigned)*idx ) < 0)
     HGOTO_DONE(FAIL)
-      
+
   done:
     return ret_value;
 
@@ -111,17 +111,17 @@ h5dsattach_scale_c( hid_t_f *did, hid_t_f *dsid, int_f *idx)
 *-------------------------------------------------------------------------
 */
 int_f
-h5dsdetach_scale_c( hid_t_f *did, hid_t_f *dsid, int_f *idx) 
+h5dsdetach_scale_c( hid_t_f *did, hid_t_f *dsid, int_f *idx)
 {
   int_f ret_value = 0;
-  
+
   /*
    * call H5DSset_scale function.
    */
-  
+
   if(H5DSdetach_scale( (hid_t)*did, (hid_t)*dsid, (unsigned)*idx ) < 0)
     HGOTO_DONE(FAIL)
-      
+
   done:
     return ret_value;
 
@@ -144,11 +144,11 @@ h5dsdetach_scale_c( hid_t_f *did, hid_t_f *dsid, int_f *idx)
 *-------------------------------------------------------------------------
 */
 int_f
-h5dsis_attached_c( hid_t_f *did, hid_t_f *dsid, int_f *idx, int_f *is_attached) 
+h5dsis_attached_c( hid_t_f *did, hid_t_f *dsid, int_f *idx, int_f *is_attached)
 {
   int_f ret_value = 0;
   htri_t c_is_attached;
-  
+
   /*
    * call H5DSis_attached function.
    */
@@ -157,7 +157,7 @@ h5dsis_attached_c( hid_t_f *did, hid_t_f *dsid, int_f *idx, int_f *is_attached)
     HGOTO_DONE(FAIL)
 
   *is_attached = (int_f)c_is_attached;
-      
+
   done:
       return ret_value;
 
@@ -179,20 +179,20 @@ h5dsis_attached_c( hid_t_f *did, hid_t_f *dsid, int_f *idx, int_f *is_attached)
 *-------------------------------------------------------------------------
 */
 int_f
-h5dsis_scale_c( hid_t_f *did, int_f *is_scale) 
+h5dsis_scale_c( hid_t_f *did, int_f *is_scale)
 {
   int_f ret_value = 0;
   htri_t c_is_scale;
-  
+
   /*
    * call H5DSis_scale function.
    */
-  
+
   if((c_is_scale=H5DSis_scale( (hid_t)*did )) < 0)
     HGOTO_DONE(FAIL)
 
   *is_scale = (int_f)c_is_scale;
-      
+
   done:
     return ret_value;
 
@@ -215,15 +215,15 @@ h5dsis_scale_c( hid_t_f *did, int_f *is_scale)
 *-------------------------------------------------------------------------
 */
 int_f
-h5dsset_label_c(hid_t_f *did, int_f *idx, _fcd label, size_t_f *labellen) 
+h5dsset_label_c(hid_t_f *did, int_f *idx, _fcd label, size_t_f *labellen)
 {
   char *c_label = NULL;
   int_f ret_value = 0;
-  
+
   /*
    * convert FORTRAN name to C name
    */
-  
+
   if(NULL == (c_label = (char *)HD5f2cstring(label, (size_t)*labellen)))
     HGOTO_DONE(FAIL)
 
@@ -258,7 +258,7 @@ h5dsset_label_c(hid_t_f *did, int_f *idx, _fcd label, size_t_f *labellen)
 *-------------------------------------------------------------------------
 */
 int_f
-h5dsget_label_c(hid_t_f *did, int_f *idx, _fcd label, size_t_f *size) 
+h5dsget_label_c(hid_t_f *did, int_f *idx, _fcd label, size_t_f *size)
 {
   char *c_label = NULL;
   ssize_t size_c = -1;
@@ -273,18 +273,18 @@ h5dsget_label_c(hid_t_f *did, int_f *idx, _fcd label, size_t_f *size)
   /*
    * call H5DSget_label function.
    */
-      
+
   if( (size_c = H5DSget_label( (hid_t)*did, (unsigned)*idx, c_label, (size_t)*size+1)) < 0)
     HGOTO_DONE(FAIL)
 
   /*
    * Convert C name to FORTRAN and place it in the given buffer
    */
-      
+
   HD5packFstring(c_label, _fcdtocp(label), (size_t)*size);
 
 done:
-     *size = (size_t_f)size_c; /* Don't subtract '1'  because H5DSget_label doesn't include the 
+     *size = (size_t_f)size_c; /* Don't subtract '1'  because H5DSget_label doesn't include the
                                 * trailing NULL in the length calculation, Ref. HDFFV-7596 */
      if(c_label) HDfree(c_label);
      return ret_value;
@@ -307,7 +307,7 @@ done:
 *-------------------------------------------------------------------------
 */
 int_f
-h5dsget_scale_name_c(hid_t_f *did, _fcd name, size_t_f *size) 
+h5dsget_scale_name_c(hid_t_f *did, _fcd name, size_t_f *size)
 {
   char *c_scale_name = NULL;
   ssize_t size_c = -1;
@@ -322,7 +322,7 @@ h5dsget_scale_name_c(hid_t_f *did, _fcd name, size_t_f *size)
   /*
    * call H5DSget_scale_name function.
    */
-      
+
   if( (size_c = H5DSget_scale_name( (hid_t)*did, c_scale_name, (size_t)*size+1)) < 0)
     HGOTO_DONE(FAIL)
 
@@ -354,17 +354,17 @@ done:
 *-------------------------------------------------------------------------
 */
 int_f
-h5dsget_num_scales_c( hid_t_f *did, int_f *idx, int_f *num_scales) 
+h5dsget_num_scales_c( hid_t_f *did, int_f *idx, int_f *num_scales)
 {
   int_f ret_value = 0;
-  
+
   /*
    * call H5DSset_scale function.
    */
-  
+
   if( (*num_scales = (int_f)H5DSget_num_scales( (hid_t)*did, (unsigned)*idx)) < 0)
     HGOTO_DONE(FAIL)
-      
+
   done:
     return ret_value;
 
diff --git a/hl/fortran/src/H5LTf90proto.h b/hl/fortran/src/H5LTf90proto.h
index 031db2c..44a2fee 100644
--- a/hl/fortran/src/H5LTf90proto.h
+++ b/hl/fortran/src/H5LTf90proto.h
@@ -174,9 +174,9 @@ h5ltread_dataset_string_c (hid_t_f *loc_id,
 
 HDF5_HL_F90CSTUBDLL
 int_f
-h5ltpath_valid_c(hid_t_f *loc_id, 
-                  _fcd path, 
-                  size_t_f *pathlen, 
+h5ltpath_valid_c(hid_t_f *loc_id,
+                  _fcd path,
+                  size_t_f *pathlen,
                   int_f *check_object_valid_c);
 
 /*-------------------------------------------------------------------------
@@ -429,7 +429,7 @@ h5tbget_field_info_c(hid_t_f *loc_id,
                       size_t_f *namelen2,
                       size_t_f *lenmax,
                       _fcd field_names,
-                      size_t_f *maxlen_out);    
+                      size_t_f *maxlen_out);
 
 
 #endif /* _H5LTf90proto_H */
diff --git a/hl/fortran/src/H5LTfc.c b/hl/fortran/src/H5LTfc.c
index 0f8a58f..3597c3a 100644
--- a/hl/fortran/src/H5LTfc.c
+++ b/hl/fortran/src/H5LTfc.c
@@ -438,7 +438,7 @@ h5ltget_attribute_c(hid_t_f *loc_id,
       else
         goto done;
     }
- 
+
     if (ret < 0)
         goto done;
 
@@ -512,7 +512,7 @@ h5ltget_attribute_string_c(hid_t_f *loc_id,
     /*
      * Convert C name to FORTRAN and place it in the given buffer
      */
-    HD5packFstring(c_buf, _fcdtocp(buf), (size_t)*buf_size); 
+    HD5packFstring(c_buf, _fcdtocp(buf), (size_t)*buf_size);
 
     ret_value = 0;
 
@@ -893,9 +893,9 @@ done:
 */
 
 int_f
-h5ltpath_valid_c(hid_t_f *loc_id, 
-                  _fcd path, 
-                  size_t_f *pathlen, 
+h5ltpath_valid_c(hid_t_f *loc_id,
+                  _fcd path,
+                  size_t_f *pathlen,
                   int_f *check_object_valid_c)
 {
     htri_t ret = -1;
@@ -907,7 +907,7 @@ h5ltpath_valid_c(hid_t_f *loc_id,
      */
     if( NULL == (c_path = (char *)HD5f2cstring(path, (size_t)*pathlen)))
       goto done;
-    
+
     check_object_valid = FALSE;
     if(*check_object_valid_c == 1)
       check_object_valid = TRUE;
diff --git a/hl/fortran/src/H5TBfc.c b/hl/fortran/src/H5TBfc.c
index 331f0bc..285cd84 100644
--- a/hl/fortran/src/H5TBfc.c
+++ b/hl/fortran/src/H5TBfc.c
@@ -142,7 +142,7 @@ int_f
 h5tbmake_table_ptr_c(size_t_f *namelen1, _fcd name1, hid_t_f *loc_id, size_t_f *namelen,
 		     _fcd name, hsize_t_f *nfields, hsize_t_f *nrecords, size_t_f *type_size,
 		     size_t_f *field_offset, hid_t_f *field_types, hsize_t_f *chunk_size,
-		     void *fill_data, int_f *compress, 
+		     void *fill_data, int_f *compress,
 		     size_t_f *char_len_field_names, /* field_names lengths */
 		     size_t_f *max_char_size_field_names, /* char len of fields */
 		     char *field_names,
@@ -233,7 +233,7 @@ done:
 /*-------------------------------------------------------------------------
 * Function: h5tbread_table_c
 *
-* Purpose: Call H5TBread_table using F2003 features 
+* Purpose: Call H5TBread_table using F2003 features
 *
 * Return: Success: 0, Failure: -1
 *
@@ -261,7 +261,7 @@ h5tbread_table_c(hid_t_f *loc_id, _fcd name, size_t_f *namelen, hsize_t_f *nfiel
      */
     if(NULL == (c_name = (char *)HD5f2cstring(name, (size_t)*namelen)))
         HGOTO_DONE(FAIL)
-	  
+
     if(NULL == (c_dst_offset = (size_t *)HDmalloc(sizeof(size_t) * (size_t)c_nfields)))
         HGOTO_DONE(FAIL)
     if(NULL == (c_dst_sizes = (size_t *)HDmalloc(sizeof(size_t) * (size_t)c_nfields)))
@@ -270,7 +270,7 @@ h5tbread_table_c(hid_t_f *loc_id, _fcd name, size_t_f *namelen, hsize_t_f *nfiel
     for(i = 0; i < c_nfields; i++) {
       c_dst_offset[i] = (size_t)dst_offset[i];
       c_dst_sizes[i] = (size_t)dst_sizes[i];
-    } /* end for */	  
+    } /* end for */
 
     /*
      * call H5TBread_table function.
@@ -514,7 +514,7 @@ h5tbinsert_field_c(hid_t_f *loc_id, size_t_f *namelen, _fcd name, size_t_f *name
      * call H5TBinsert_field function.
      */
 
-    if(H5TBinsert_field((hid_t)*loc_id, c_name, c_name1, (hid_t)*field_type, 
+    if(H5TBinsert_field((hid_t)*loc_id, c_name, c_name1, (hid_t)*field_type,
             (hsize_t)*position, NULL, buf) < 0)
         HGOTO_DONE(FAIL)
 
@@ -683,7 +683,7 @@ h5tbget_field_info_c(hid_t_f *loc_id, size_t_f *namelen, _fcd name, hsize_t_f *n
     if(H5TBget_field_info((hid_t)*loc_id, c_name, c_field_names, c_field_sizes,
             c_field_offsets, &c_type_size) < 0)
         HGOTO_DONE(FAIL)
-   
+
     /* return values */
 
     /* names array */
@@ -709,7 +709,7 @@ h5tbget_field_info_c(hid_t_f *loc_id, size_t_f *namelen, _fcd name, hsize_t_f *n
         field_offsets[i] = (size_t_f)c_field_offsets[i];
     } /* end for */
 
-    *maxlen_out = (size_t_f)length; 
+    *maxlen_out = (size_t_f)length;
 
 done:
     if(c_name)
diff --git a/hl/fortran/test/Makefile.am b/hl/fortran/test/Makefile.am
index 0552aaa..5d1ab2e 100644
--- a/hl/fortran/test/Makefile.am
+++ b/hl/fortran/test/Makefile.am
@@ -36,7 +36,7 @@ check_PROGRAMS=$(TEST_PROG)
 
 LIBOBJS=$(top_builddir)/fortran/test/tf_gen.o
 
-LDADD=$(LIBOBJS) $(LIBH5F_HL) $(LIBH5F) $(LIBH5_HL)  $(LIBHDF5) 
+LDADD=$(LIBOBJS) $(LIBH5F_HL) $(LIBH5F) $(LIBH5_HL)  $(LIBHDF5)
 
 # Source files for the programs
 tstds_SOURCES=tstds.F90
diff --git a/hl/src/H5DO.c b/hl/src/H5DO.c
index 057c43b..0fbdab3 100644
--- a/hl/src/H5DO.c
+++ b/hl/src/H5DO.c
@@ -90,7 +90,7 @@ H5DOread_chunk(hid_t dset_id, hid_t dxpl_id, const hsize_t *offset, uint32_t *fi
  * 	This routine is copied from the fast forward feature branch: features/hdf5_ff
  *	src/H5FF.c:H5DOappend() with the following modifications:
  * 	1) Remove and replace macro calls such as
- *		FUNC_ENTER_API, H5TRACE, HGOTO_ERROR 
+ *		FUNC_ENTER_API, H5TRACE, HGOTO_ERROR
  * 	   accordingly because hl does not have these macros
  *	2) Replace H5I_get_type() by H5Iget_type()
  *	3) Replace H5P_isa_class() by H5Pisa_class()
@@ -103,7 +103,7 @@ H5DOread_chunk(hid_t dset_id, hid_t dxpl_id, const hsize_t *offset, uint32_t *fi
  *-------------------------------------------------------------------------
  */
 herr_t
-H5DOappend(hid_t dset_id, hid_t dxpl_id, unsigned axis, size_t extension, 
+H5DOappend(hid_t dset_id, hid_t dxpl_id, unsigned axis, size_t extension,
            hid_t memtype, const void *buf)
 {
     hbool_t created_dxpl = FALSE;       /* Whether we created a DXPL */
@@ -161,7 +161,7 @@ H5DOappend(hid_t dset_id, hid_t dxpl_id, unsigned axis, size_t extension,
     if(H5Sget_simple_extent_dims(space_id, size, NULL) < 0)
         goto done;
 
-    /* Adjust the dimension size of the requested dimension, 
+    /* Adjust the dimension size of the requested dimension,
      * but first record the old dimension size
      */
     old_size = size[axis];
diff --git a/hl/src/H5IM.c b/hl/src/H5IM.c
index a4818b8..2a7ed9b 100644
--- a/hl/src/H5IM.c
+++ b/hl/src/H5IM.c
@@ -44,7 +44,7 @@ herr_t H5IMmake_image_8bit( hid_t loc_id,
     hsize_t  dims[IMAGE8_RANK];
 
     /* check the arguments */
-    if (dset_name == NULL) 
+    if (dset_name == NULL)
         return -1;
 
     /* Initialize the image dimensions */
@@ -104,9 +104,9 @@ herr_t H5IMmake_image_24bit( hid_t loc_id,
     hsize_t  dims[IMAGE24_RANK];
 
     /* check the arguments */
-    if (interlace == NULL) 
+    if (interlace == NULL)
         return -1;
-    if (dset_name == NULL) 
+    if (dset_name == NULL)
         return -1;
 
 
@@ -180,7 +180,7 @@ static herr_t find_palette(hid_t loc_id,
     int ret = H5_ITER_CONT;
 
     /* check the arguments */
-    if (name == NULL) 
+    if (name == NULL)
         return -1;
 
     /* Shut compiler up */
@@ -261,9 +261,9 @@ herr_t H5IMget_image_info( hid_t loc_id,
     int         has_attr;
 
     /* check the arguments */
-    if (dset_name == NULL) 
+    if (dset_name == NULL)
       return -1;
-    if (interlace == NULL) 
+    if (interlace == NULL)
       return -1;
 
     /*assume initially we have no palettes attached*/
@@ -430,7 +430,7 @@ herr_t H5IMread_image( hid_t loc_id,
     hid_t   did;
 
     /* check the arguments */
-    if (dset_name == NULL) 
+    if (dset_name == NULL)
       return -1;
 
     /* Open the dataset. */
@@ -483,7 +483,7 @@ herr_t H5IMmake_palette( hid_t loc_id,
     int has_pal;
 
     /* check the arguments */
-    if (pal_name == NULL) 
+    if (pal_name == NULL)
       return -1;
 
     /* Check if the dataset already exists */
@@ -548,11 +548,11 @@ herr_t H5IMlink_palette( hid_t loc_id,
     hsize_t     dim_ref;
     int         ok_pal;
 
-    
+
     /* check the arguments */
-    if (image_name == NULL) 
+    if (image_name == NULL)
       return -1;
-    if (pal_name == NULL) 
+    if (pal_name == NULL)
       return -1;
 
     /* The image dataset may or may not have the attribute "PALETTE"
@@ -717,9 +717,9 @@ herr_t H5IMunlink_palette( hid_t loc_id,
     int         ok_pal, has_pal;
 
     /* check the arguments */
-    if(image_name == NULL) 
+    if(image_name == NULL)
       return -1;
-    if(pal_name == NULL) 
+    if(pal_name == NULL)
       return -1;
 
     /* Try to find the palette dataset */
@@ -818,7 +818,7 @@ herr_t H5IMget_npalettes( hid_t loc_id,
     int         has_pal;
 
     /* check the arguments */
-    if(image_name == NULL) 
+    if(image_name == NULL)
       return -1;
 
     /*assume initially we have no palettes attached*/
@@ -916,7 +916,7 @@ herr_t H5IMget_palette_info( hid_t loc_id,
     hsize_t    pal_maxdims[2];
 
     /* check the arguments */
-    if (image_name == NULL) 
+    if (image_name == NULL)
       return -1;
 
     /* Open the dataset. */
@@ -1030,9 +1030,9 @@ herr_t H5IMget_palette( hid_t loc_id,
     hid_t      pal_id;
 
     /* check the arguments */
-    if (image_name == NULL) 
+    if (image_name == NULL)
       return -1;
-    if (pal_data == NULL) 
+    if (pal_data == NULL)
       return -1;
 
 
@@ -1133,7 +1133,7 @@ herr_t H5IMis_image( hid_t loc_id,
     herr_t     ret;
 
     /* check the arguments */
-    if (dset_name == NULL) 
+    if (dset_name == NULL)
       return -1;
 
     /* Assume initially fail condition */
@@ -1237,7 +1237,7 @@ herr_t H5IMis_palette( hid_t loc_id,
     herr_t     ret;
 
     /* check the arguments */
-    if (dset_name == NULL) 
+    if (dset_name == NULL)
       return -1;
 
     /* Assume initially fail condition */
diff --git a/hl/src/H5LD.c b/hl/src/H5LD.c
index 1669a30..3106ea8 100644
--- a/hl/src/H5LD.c
+++ b/hl/src/H5LD.c
@@ -209,7 +209,7 @@ H5LD_construct_vector(char *fields, H5LD_memb_t *listv[]/*OUT*/, hid_t par_tid)
                         valid = FALSE;
                     end_of_fields = TRUE;
                     break;
-	
+
                 case '\\': /* escape character */
                     ++fields_ptr; /* skip it */
                     if(*fields_ptr == '\0')
@@ -241,7 +241,7 @@ H5LD_construct_vector(char *fields, H5LD_memb_t *listv[]/*OUT*/, hid_t par_tid)
                     gotcomma = TRUE;
                     break;
 
-                default: 
+                default:
                     *cur++ = *fields_ptr++;
                     gotmember = TRUE;
                     break;
@@ -438,7 +438,7 @@ H5LD_get_dset_elmts(hid_t did, const hsize_t *prev_dims, const hsize_t *cur_dims
     /* Get dataset's dataspace */
     if((sid = H5Dget_space(did)) < 0)
 	goto done;
-    
+
     /* Get the number of dimensions */
     if((ndims = H5Sget_simple_extent_ndims(sid)) < 0)
 	goto done;
@@ -508,7 +508,7 @@ H5LD_get_dset_elmts(hid_t did, const hsize_t *prev_dims, const hsize_t *cur_dims
 	/* Get the total size of the dataset's datatypes */
 	if(0 == (tot_tsize = H5LD_get_dset_type_size(did, NULL)))
 	    goto done;
-	
+
 	/* Allocate memory for reading in the elements in the dataset selection */
 	if(NULL == (sav_buf = tmp_buf = (char *)HDcalloc((size_t)num_elmts, tot_tsize)))
 	    goto done;
diff --git a/hl/src/H5LT.c b/hl/src/H5LT.c
index 1caa881..a631533 100644
--- a/hl/src/H5LT.c
+++ b/hl/src/H5LT.c
@@ -29,19 +29,19 @@ char *myinput;
 size_t  indent = 0;
 
 
-/* File Image operations					
-	
-   A file image is a representation of an HDF5 file in a memory	 
-   buffer. In order to perform operations on an image in a similar way	
+/* File Image operations
+
+   A file image is a representation of an HDF5 file in a memory
+   buffer. In order to perform operations on an image in a similar way
    to a  file, the application buffer is copied to a FAPL buffer, which
-   in turn is copied to a VFD buffer. Buffer copying can decrease	
-   performance, especially when using large file images. A solution to	
-   this issue is to simulate the copying of the application buffer,	
-   when actually the same buffer is used for the FAPL and the VFD.	
-   This is implemented by using callbacks that simulate the standard	
-   functions for memory management (additional callbacks are used for	
-   the management of associated data structures). From the application	
-   standpoint, a file handle can be obtained from a file image by using	
+   in turn is copied to a VFD buffer. Buffer copying can decrease
+   performance, especially when using large file images. A solution to
+   this issue is to simulate the copying of the application buffer,
+   when actually the same buffer is used for the FAPL and the VFD.
+   This is implemented by using callbacks that simulate the standard
+   functions for memory management (additional callbacks are used for
+   the management of associated data structures). From the application
+   standpoint, a file handle can be obtained from a file image by using
    the API routine H5LTopen_file_image(). This function takes a flag
    argument that indicates the HDF5 library how to handle the given image;
    several flag values can be combined by using the bitwise OR operator.
@@ -61,9 +61,9 @@ size_t  indent = 0;
    well. The application is responsible to release the image buffer.
 */
 
-/* Data structure to pass application data to callbacks. */ 
+/* Data structure to pass application data to callbacks. */
 typedef struct {
-    void *app_image_ptr;	/* Pointer to application buffer */ 
+    void *app_image_ptr;	/* Pointer to application buffer */
     size_t app_image_size;	/* Size of application buffer */
     void *fapl_image_ptr;	/* Pointer to FAPL buffer */
     size_t fapl_image_size;	/* Size of FAPL buffer */
@@ -88,17 +88,17 @@ static herr_t udata_free(void *udata);
 
 
 /*-------------------------------------------------------------------------
-* Function: image_malloc 
+* Function: image_malloc
 *
 * Purpose: Simulates malloc() function to avoid copying file images.
 *          The application buffer is set to the buffer on only one FAPL.
 *          Then the FAPL buffer can be copied to other FAPL buffers or
-*          to only one VFD buffer. 
+*          to only one VFD buffer.
 *
 * Return: Address of "allocated" buffer, if successful. Otherwise, it returns
 *         NULL.
 *
-* Programmer: Christian Chilan 
+* Programmer: Christian Chilan
 *
 * Date: October 3, 2011
 *
@@ -109,23 +109,23 @@ image_malloc(size_t size, H5FD_file_image_op_t file_image_op, void *_udata)
 {
     H5LT_file_image_ud_t *udata = (H5LT_file_image_ud_t *)_udata;
     void * return_value = NULL;
-    
+
     /* callback is only used if the application buffer is not actually copied */
-    if (!(udata->flags & H5LT_FILE_IMAGE_DONT_COPY)) 
+    if (!(udata->flags & H5LT_FILE_IMAGE_DONT_COPY))
         goto out;
 
     switch ( file_image_op ) {
         /* the app buffer is "copied" to only one FAPL. Afterwards, FAPLs can be "copied" */
         case H5FD_FILE_IMAGE_OP_PROPERTY_LIST_SET:
-            if (udata->app_image_ptr == NULL) 
+            if (udata->app_image_ptr == NULL)
                 goto out;
-            if (udata->app_image_size != size) 
+            if (udata->app_image_size != size)
                 goto out;
-            if (udata->fapl_image_ptr != NULL) 
+            if (udata->fapl_image_ptr != NULL)
                 goto out;
-            if (udata->fapl_image_size != 0) 
+            if (udata->fapl_image_size != 0)
                 goto out;
-            if (udata->fapl_ref_count != 0) 
+            if (udata->fapl_ref_count != 0)
                 goto out;
 
             udata->fapl_image_ptr = udata->app_image_ptr;
@@ -135,11 +135,11 @@ image_malloc(size_t size, H5FD_file_image_op_t file_image_op, void *_udata)
 	    break;
 
 	case H5FD_FILE_IMAGE_OP_PROPERTY_LIST_COPY:
-            if (udata->fapl_image_ptr == NULL) 
+            if (udata->fapl_image_ptr == NULL)
                 goto out;
-            if (udata->fapl_image_size != size) 
+            if (udata->fapl_image_size != size)
                 goto out;
-            if (udata->fapl_ref_count == 0) 
+            if (udata->fapl_ref_count == 0)
                 goto out;
 
             return_value = udata->fapl_image_ptr;
@@ -151,17 +151,17 @@ image_malloc(size_t size, H5FD_file_image_op_t file_image_op, void *_udata)
 
         case H5FD_FILE_IMAGE_OP_FILE_OPEN:
             /* FAPL buffer is "copied" to only one VFD buffer */
-            if (udata->vfd_image_ptr != NULL) 
+            if (udata->vfd_image_ptr != NULL)
                 goto out;
-            if (udata->vfd_image_size != 0) 
+            if (udata->vfd_image_size != 0)
                 goto out;
-            if (udata->vfd_ref_count != 0) 
+            if (udata->vfd_ref_count != 0)
                 goto out;
-            if (udata->fapl_image_ptr == NULL) 
+            if (udata->fapl_image_ptr == NULL)
                 goto out;
-            if (udata->fapl_image_size != size) 
+            if (udata->fapl_image_size != size)
                 goto out;
-            if (udata->fapl_ref_count == 0) 
+            if (udata->fapl_ref_count == 0)
                 goto out;
 
             udata->vfd_image_ptr = udata->fapl_image_ptr;
@@ -189,15 +189,15 @@ out:
 /*-------------------------------------------------------------------------
 * Function: image_memcpy
 *
-* Purpose:  Simulates memcpy() function to avoid copying file images. 
+* Purpose:  Simulates memcpy() function to avoid copying file images.
 *           The image buffer can be set to only one FAPL buffer, and
 *           "copied" to only one VFD buffer. The FAPL buffer can be
-*           "copied" to other FAPLs buffers. 
+*           "copied" to other FAPLs buffers.
 *
 * Return: The address of the destination buffer, if successful. Otherwise, it
 *         returns NULL.
 *
-* Programmer: Christian Chilan 
+* Programmer: Christian Chilan
 *
 * Date: October 3, 2011
 *
@@ -210,31 +210,31 @@ image_memcpy(void *dest, const void *src, size_t size, H5FD_file_image_op_t file
     H5LT_file_image_ud_t *udata = (H5LT_file_image_ud_t *)_udata;
 
     /* callback is only used if the application buffer is not actually copied */
-    if (!(udata->flags & H5LT_FILE_IMAGE_DONT_COPY)) 
+    if (!(udata->flags & H5LT_FILE_IMAGE_DONT_COPY))
         goto out;
 
     switch(file_image_op) {
         case H5FD_FILE_IMAGE_OP_PROPERTY_LIST_SET:
-            if (dest != udata->fapl_image_ptr) 
+            if (dest != udata->fapl_image_ptr)
                 goto out;
-            if (src != udata->app_image_ptr) 
+            if (src != udata->app_image_ptr)
                 goto out;
-            if (size != udata->fapl_image_size) 
+            if (size != udata->fapl_image_size)
                 goto out;
-            if (size != udata->app_image_size) 
+            if (size != udata->app_image_size)
                 goto out;
-            if (udata->fapl_ref_count == 0) 
+            if (udata->fapl_ref_count == 0)
                 goto out;
             break;
 
         case H5FD_FILE_IMAGE_OP_PROPERTY_LIST_COPY:
-            if (dest != udata->fapl_image_ptr) 
+            if (dest != udata->fapl_image_ptr)
                 goto out;
-            if (src != udata->fapl_image_ptr) 
+            if (src != udata->fapl_image_ptr)
                 goto out;
-            if (size != udata->fapl_image_size) 
+            if (size != udata->fapl_image_size)
                 goto out;
-            if (udata->fapl_ref_count < 2) 
+            if (udata->fapl_ref_count < 2)
                 goto out;
             break;
 
@@ -242,17 +242,17 @@ image_memcpy(void *dest, const void *src, size_t size, H5FD_file_image_op_t file
             goto out;
 
         case H5FD_FILE_IMAGE_OP_FILE_OPEN:
-            if (dest != udata->vfd_image_ptr) 
+            if (dest != udata->vfd_image_ptr)
                 goto out;
-            if (src != udata->fapl_image_ptr) 
+            if (src != udata->fapl_image_ptr)
                 goto out;
-            if (size != udata->vfd_image_size) 
+            if (size != udata->vfd_image_size)
                 goto out;
-            if (size != udata->fapl_image_size) 
+            if (size != udata->fapl_image_size)
                 goto out;
-            if (udata->fapl_ref_count == 0) 
+            if (udata->fapl_ref_count == 0)
                 goto out;
-            if (udata->vfd_ref_count != 1) 
+            if (udata->vfd_ref_count != 1)
                 goto out;
             break;
 
@@ -273,15 +273,15 @@ out:
 
 
 /*-------------------------------------------------------------------------
-* Function: image_realloc 
+* Function: image_realloc
 *
 * Purpose: Reallocates the shared application image buffer and updates data
-*          structures that manage buffer "copying". 
-*           
+*          structures that manage buffer "copying".
+*
 * Return: Address of reallocated buffer, if successful. Otherwise, it returns
-*         NULL.  
+*         NULL.
 *
-* Programmer: Christian Chilan 
+* Programmer: Christian Chilan
 *
 * Date: October 3, 2011
 *
@@ -294,29 +294,29 @@ image_realloc(void *ptr, size_t size, H5FD_file_image_op_t file_image_op, void *
     void * return_value = NULL;
 
     /* callback is only used if the application buffer is not actually copied */
-    if (!(udata->flags & H5LT_FILE_IMAGE_DONT_COPY)) 
+    if (!(udata->flags & H5LT_FILE_IMAGE_DONT_COPY))
         goto out;
 
-    /* realloc() is not allowed when the HDF5 library won't release the image 
+    /* realloc() is not allowed when the HDF5 library won't release the image
        buffer because reallocation may change the address of the buffer. The
        new address cannot be communicated to the application to release it. */
-    if (udata->flags & H5LT_FILE_IMAGE_DONT_RELEASE) 
-        goto out; 
+    if (udata->flags & H5LT_FILE_IMAGE_DONT_RELEASE)
+        goto out;
 
     /* realloc() is not allowed if the image is open in read-only mode */
-    if (!(udata->flags & H5LT_FILE_IMAGE_OPEN_RW)) 
-        goto out; 
+    if (!(udata->flags & H5LT_FILE_IMAGE_OPEN_RW))
+        goto out;
 
     if (file_image_op == H5FD_FILE_IMAGE_OP_FILE_RESIZE) {
-        if (udata->vfd_image_ptr != ptr) 
-            goto out; 
+        if (udata->vfd_image_ptr != ptr)
+            goto out;
 
-        if (udata->vfd_ref_count != 1) 
+        if (udata->vfd_ref_count != 1)
             goto out;
 
         if (NULL == (udata->vfd_image_ptr = HDrealloc(ptr, size)))
-            goto out; 
-            
+            goto out;
+
         udata->vfd_image_size = size;
         return_value = udata->vfd_image_ptr;
     } /* end if */
@@ -337,9 +337,9 @@ out:
 *          reference counters. Shared application buffer is actually
 *          deallocated if there are no outstanding references.
 *
-* Return: SUCCEED or FAIL 
+* Return: SUCCEED or FAIL
 *
-* Programmer: Christian Chilan 
+* Programmer: Christian Chilan
 *
 * Date: October 3, 2011
 *
@@ -351,19 +351,19 @@ image_free(void *ptr, H5FD_file_image_op_t file_image_op, void *_udata)
     H5LT_file_image_ud_t *udata = (H5LT_file_image_ud_t *)_udata;
 
     /* callback is only used if the application buffer is not actually copied */
-    if (!(udata->flags & H5LT_FILE_IMAGE_DONT_COPY)) 
+    if (!(udata->flags & H5LT_FILE_IMAGE_DONT_COPY))
         goto out;
 
     switch(file_image_op) {
         case H5FD_FILE_IMAGE_OP_PROPERTY_LIST_CLOSE:
-	    if (udata->fapl_image_ptr != ptr) 
+	    if (udata->fapl_image_ptr != ptr)
                 goto out;
-            if (udata->fapl_ref_count == 0) 
+            if (udata->fapl_ref_count == 0)
                 goto out;
 
             udata->fapl_ref_count--;
 
-            /* release the shared buffer only if indicated by the respective flag and there are no outstanding references */ 
+            /* release the shared buffer only if indicated by the respective flag and there are no outstanding references */
             if (udata->fapl_ref_count == 0 && udata->vfd_ref_count == 0 &&
                     !(udata->flags & H5LT_FILE_IMAGE_DONT_RELEASE)) {
                 HDfree(udata->fapl_image_ptr);
@@ -374,14 +374,14 @@ image_free(void *ptr, H5FD_file_image_op_t file_image_op, void *_udata)
             break;
 
         case H5FD_FILE_IMAGE_OP_FILE_CLOSE:
-            if (udata->vfd_image_ptr != ptr) 
+            if (udata->vfd_image_ptr != ptr)
                 goto out;
-            if (udata->vfd_ref_count != 1) 
+            if (udata->vfd_ref_count != 1)
                 goto out;
 
             udata->vfd_ref_count--;
 
-            /* release the shared buffer only if indicated by the respective flag and there are no outstanding references */ 
+            /* release the shared buffer only if indicated by the respective flag and there are no outstanding references */
             if (udata->fapl_ref_count == 0 && udata->vfd_ref_count == 0 &&
                     !(udata->flags & H5LT_FILE_IMAGE_DONT_RELEASE)) {
                 HDfree(udata->vfd_image_ptr);
@@ -410,7 +410,7 @@ out:
 
 
 /*-------------------------------------------------------------------------
-* Function: udata_copy 
+* Function: udata_copy
 *
 * Purpose: Simulates the copying of the user data structure utilized in the
 *          management of the "copying" of file images.
@@ -418,7 +418,7 @@ out:
 * Return: Address of "newly allocated" structure, if successful. Otherwise, it
 *         returns NULL.
 *
-* Programmer: Christian Chilan 
+* Programmer: Christian Chilan
 *
 * Date: October 3, 2011
 *
@@ -430,9 +430,9 @@ udata_copy(void *_udata)
     H5LT_file_image_ud_t *udata = (H5LT_file_image_ud_t *)_udata;
 
     /* callback is only used if the application buffer is not actually copied */
-    if (!(udata->flags & H5LT_FILE_IMAGE_DONT_COPY)) 
+    if (!(udata->flags & H5LT_FILE_IMAGE_DONT_COPY))
         goto out;
-    if (udata->ref_count == 0) 
+    if (udata->ref_count == 0)
         goto out;
 
     udata->ref_count++;
@@ -449,11 +449,11 @@ out:
 *
 * Purpose: Simulates deallocation of the user data structure utilized in the
 *          management of the "copying" of file images. The data structure is
-*          actually deallocated when there are no outstanding references. 
+*          actually deallocated when there are no outstanding references.
 *
-* Return: SUCCEED or FAIL 
+* Return: SUCCEED or FAIL
 *
-* Programmer: Christian Chilan 
+* Programmer: Christian Chilan
 *
 * Date: October 3, 2011
 *
@@ -465,9 +465,9 @@ udata_free(void *_udata)
     H5LT_file_image_ud_t *udata = (H5LT_file_image_ud_t *)_udata;
 
     /* callback is only used if the application buffer is not actually copied */
-    if (!(udata->flags & H5LT_FILE_IMAGE_DONT_COPY)) 
+    if (!(udata->flags & H5LT_FILE_IMAGE_DONT_COPY))
         goto out;
-    if (udata->ref_count == 0) 
+    if (udata->ref_count == 0)
         goto out;
 
     udata->ref_count--;
@@ -479,7 +479,7 @@ udata_free(void *_udata)
 
     return(SUCCEED);
 
-out:        
+out:
     return(FAIL);
 } /* end udata_free */
 
@@ -522,7 +522,7 @@ H5LT_make_dataset_numerical( hid_t loc_id,
     hid_t   did = -1, sid = -1;
 
     /* check the arguments */
-    if (dset_name == NULL) 
+    if (dset_name == NULL)
       return -1;
 
     /* Create the data space for the dataset. */
@@ -801,7 +801,7 @@ herr_t H5LTmake_dataset_string(hid_t loc_id,
     size_t  size;
 
     /* check the arguments */
-    if (dset_name == NULL) 
+    if (dset_name == NULL)
       return -1;
 
     /* create a string data type */
@@ -852,11 +852,11 @@ out:
 /*-------------------------------------------------------------------------
 * Function: H5LTopen_file_image
 *
-* Purpose: Open a user supplied file image using the core file driver. 
+* Purpose: Open a user supplied file image using the core file driver.
 *
 * Return: File identifier, Failure: -1
 *
-* Programmer: Christian Chilan 
+* Programmer: Christian Chilan
 *
 * Date: October 3, 2011
 *
@@ -871,22 +871,22 @@ hid_t H5LTopen_file_image(void *buf_ptr, size_t buf_size, unsigned flags)
     size_t              min_incr = 65536;       /* Minimum buffer increment */
     double              buf_prcnt = 0.1f;       /* Percentage of buffer size to set
                                                     as increment */
-    static long         file_name_counter; 
-    H5FD_file_image_callbacks_t callbacks = {&image_malloc, &image_memcpy, 
-                                           &image_realloc, &image_free, 
-                                           &udata_copy, &udata_free, 
+    static long         file_name_counter;
+    H5FD_file_image_callbacks_t callbacks = {&image_malloc, &image_memcpy,
+                                           &image_realloc, &image_free,
+                                           &udata_copy, &udata_free,
                                            (void *)NULL};
 
     /* check arguments */
-    if (buf_ptr == NULL) 
+    if (buf_ptr == NULL)
         goto out;
-    if (buf_size == 0) 
+    if (buf_size == 0)
         goto out;
     if (flags & (unsigned)~(H5LT_FILE_IMAGE_ALL))
         goto out;
 
     /* Create FAPL to transmit file image */
-    if ((fapl = H5Pcreate(H5P_FILE_ACCESS)) < 0) 
+    if ((fapl = H5Pcreate(H5P_FILE_ACCESS)) < 0)
         goto out;
 
     /* set allocation increment to a percentage of the supplied buffer size, or
@@ -898,7 +898,7 @@ hid_t H5LTopen_file_image(void *buf_ptr, size_t buf_size, unsigned flags)
         alloc_incr = min_incr;
 
     /* Configure FAPL to use the core file driver */
-    if (H5Pset_fapl_core(fapl, alloc_incr, FALSE) < 0) 
+    if (H5Pset_fapl_core(fapl, alloc_incr, FALSE) < 0)
         goto out;
 
     /* Set callbacks for file image ops ONLY if the file image is NOT copied */
@@ -932,10 +932,10 @@ hid_t H5LTopen_file_image(void *buf_ptr, size_t buf_size, unsigned flags)
     } /* end if */
 
     /* Assign file image in user buffer to FAPL */
-    if (H5Pset_file_image(fapl, buf_ptr, buf_size) < 0) 
+    if (H5Pset_file_image(fapl, buf_ptr, buf_size) < 0)
         goto out;
 
-    /* set file open flags */  
+    /* set file open flags */
     if (flags & H5LT_FILE_IMAGE_OPEN_RW)
         file_open_flags = H5F_ACC_RDWR;
     else
@@ -943,17 +943,17 @@ hid_t H5LTopen_file_image(void *buf_ptr, size_t buf_size, unsigned flags)
 
     /* define a unique file name */
     HDsnprintf(file_name, (sizeof(file_name) - 1), "file_image_%ld", file_name_counter++);
-   
-    /* Assign file image in FAPL to the core file driver */ 
-    if ((file_id = H5Fopen(file_name, file_open_flags, fapl)) < 0) 
+
+    /* Assign file image in FAPL to the core file driver */
+    if ((file_id = H5Fopen(file_name, file_open_flags, fapl)) < 0)
         goto out;
 
     /* Close FAPL */
-    if (H5Pclose(fapl) < 0) 
+    if (H5Pclose(fapl) < 0)
         goto out;
 
-    /* Return file identifier */ 
-    return file_id; 
+    /* Return file identifier */
+    return file_id;
 
 out:
     H5E_BEGIN_TRY {
@@ -983,7 +983,7 @@ H5LT_read_dataset_numerical(hid_t loc_id, const char *dset_name, hid_t tid, void
     hid_t   did;
 
     /* check the arguments */
-    if (dset_name == NULL) 
+    if (dset_name == NULL)
       return -1;
 
     /* Open the dataset. */
@@ -1178,7 +1178,7 @@ herr_t H5LTread_dataset_string( hid_t loc_id,
     hid_t   tid = -1;
 
     /* check the arguments */
-    if (dset_name == NULL) 
+    if (dset_name == NULL)
       return -1;
 
     /* Open the dataset. */
@@ -1231,7 +1231,7 @@ herr_t H5LTget_dataset_ndims( hid_t loc_id,
     hid_t       sid = -1;
 
     /* check the arguments */
-    if (dset_name == NULL) 
+    if (dset_name == NULL)
       return -1;
 
     /* Open the dataset. */
@@ -1291,7 +1291,7 @@ herr_t H5LTget_dataset_info( hid_t loc_id,
     hid_t       sid = -1;
 
     /* check the arguments */
-    if (dset_name == NULL) 
+    if (dset_name == NULL)
       return -1;
 
     /* open the dataset. */
@@ -1368,9 +1368,9 @@ find_dataset(hid_t loc_id, const char *name, const H5L_info2_t *linfo, void *op_
     int ret = 0;
 
     /* check the arguments */
-    if (name == NULL) 
+    if (name == NULL)
       return ret;
-    
+
     /* Shut the compiler up */
     loc_id = loc_id;
     linfo = linfo;
@@ -1460,11 +1460,11 @@ herr_t H5LTset_attribute_string( hid_t loc_id,
     size_t     attr_size;
 
     /* check the arguments */
-    if (obj_name == NULL) 
+    if (obj_name == NULL)
       return -1;
-    if (attr_name == NULL) 
+    if (attr_name == NULL)
       return -1;
-    if (attr_data == NULL) 
+    if (attr_data == NULL)
       return -1;
 
     /* Open the object */
@@ -1557,9 +1557,9 @@ herr_t H5LT_set_attribute_numerical( hid_t loc_id,
     int        has_attr;
 
     /* check the arguments */
-    if (obj_name == NULL) 
+    if (obj_name == NULL)
       return -1;
-    if (attr_name == NULL) 
+    if (attr_name == NULL)
       return -1;
 
     /* Open the object */
@@ -1974,7 +1974,7 @@ find_attr(hid_t loc_id, const char *name, const H5A_info_t *ainfo,
     int ret = H5_ITER_CONT;
 
     /* check the arguments */
-    if (name == NULL) 
+    if (name == NULL)
       return H5_ITER_CONT;
 
     /* Shut compiler up */
@@ -2076,9 +2076,9 @@ herr_t H5LTget_attribute_ndims( hid_t loc_id,
     hid_t       obj_id;
 
     /* check the arguments */
-    if (obj_name == NULL) 
+    if (obj_name == NULL)
       return -1;
-    if (attr_name == NULL) 
+    if (attr_name == NULL)
       return -1;
 
     /* Open the object */
@@ -2149,9 +2149,9 @@ herr_t H5LTget_attribute_info( hid_t loc_id,
     hid_t       obj_id;
 
     /* check the arguments */
-    if (obj_name == NULL) 
+    if (obj_name == NULL)
       return -1;
-    if (attr_name == NULL) 
+    if (attr_name == NULL)
       return -1;
 
     /* Open the object */
@@ -2230,7 +2230,7 @@ hid_t H5LTtext_to_dtype(const char *text, H5LT_lang_t lang_type)
     hid_t   type_id;
 
     /* check the arguments */
-    if (text == NULL) 
+    if (text == NULL)
       return -1;
 
     if(lang_type <= H5LT_LANG_ERR || lang_type >= H5LT_NO_LANG)
@@ -2273,7 +2273,7 @@ out:
 *
 *-------------------------------------------------------------------------
 */
-static char* 
+static char*
 realloc_and_append(hbool_t _no_user_buf, size_t *len, char *buf, const char *str_to_add)
 {
     size_t size_str_to_add, size_str;
@@ -2298,7 +2298,7 @@ realloc_and_append(hbool_t _no_user_buf, size_t *len, char *buf, const char *str
       /* find the size of the current buffer */
       size_str = HDstrlen(buf);
 
-      /* Check to make sure the appended string does not 
+      /* Check to make sure the appended string does not
        * extend past the allocated buffer; if it does then truncate the string
        */
       if(size_str < *len - 1) {
@@ -2555,7 +2555,7 @@ char* H5LT_dtype_to_text(hid_t dtype, char *dt_str, H5LT_lang_t lang, size_t *sl
 
     if(!(dt_str = realloc_and_append(no_user_buf, slen, dt_str, NULL)))
         goto out;
-    
+
     if(lang != H5LT_DDL) {
         HDsnprintf(dt_str, *slen, "only DDL is supported for now");
         goto out;
@@ -3122,9 +3122,9 @@ herr_t H5LTget_attribute_string( hid_t loc_id,
     hid_t      obj_id;
 
     /* check the arguments */
-    if (obj_name == NULL) 
+    if (obj_name == NULL)
       return -1;
-    if (attr_name == NULL) 
+    if (attr_name == NULL)
       return -1;
 
     /* Open the object */
@@ -3132,9 +3132,9 @@ herr_t H5LTget_attribute_string( hid_t loc_id,
         return -1;
 
     /* Get the attribute */
-    if ( H5LT_get_attribute_disk( obj_id, attr_name, data ) < 0 ) 
+    if ( H5LT_get_attribute_disk( obj_id, attr_name, data ) < 0 )
     {
-      H5Oclose(obj_id); 
+      H5Oclose(obj_id);
       return -1;
     }
 
@@ -3548,9 +3548,9 @@ static herr_t H5LT_get_attribute_mem(hid_t loc_id,
     hid_t attr_id = -1;
 
     /* check the arguments */
-    if (obj_name == NULL) 
+    if (obj_name == NULL)
       return -1;
-    if (attr_name == NULL) 
+    if (attr_name == NULL)
       return -1;
 
     /* Open the object */
@@ -3790,7 +3790,7 @@ H5LTpath_valid(hid_t loc_id, const char *path, hbool_t check_object_valid)
 	 ret_value = FALSE;
 	 goto done;
        }
-       
+
        /* Determine if link resolves to an actual object */
        if((obj_exists = H5Oexists_by_name(loc_id, tmp_path, H5P_DEFAULT)) < 0) {
 	 ret_value = FAIL;
diff --git a/hl/src/H5LTanalyze.c b/hl/src/H5LTanalyze.c
index 7288498..c05db67 100644
--- a/hl/src/H5LTanalyze.c
+++ b/hl/src/H5LTanalyze.c
@@ -1,25 +1,25 @@
-#if defined __GNUC__ && 402 <= __GNUC__ * 100 + __GNUC_MINOR__    
-#pragma GCC diagnostic ignored "-Wconversion"                     
-#pragma GCC diagnostic ignored "-Wimplicit-function-declaration"  
-#pragma GCC diagnostic ignored "-Wlarger-than="                   
-#pragma GCC diagnostic ignored "-Wmissing-prototypes"             
-#pragma GCC diagnostic ignored "-Wnested-externs"                 
-#pragma GCC diagnostic ignored "-Wold-style-definition"           
-#pragma GCC diagnostic ignored "-Wredundant-decls"                
-#pragma GCC diagnostic ignored "-Wsign-compare"                   
-#pragma GCC diagnostic ignored "-Wsign-conversion"                
-#pragma GCC diagnostic ignored "-Wstrict-overflow"                
-#pragma GCC diagnostic ignored "-Wstrict-prototypes"              
-#pragma GCC diagnostic ignored "-Wsuggest-attribute=pure"         
-#pragma GCC diagnostic ignored "-Wswitch-default"                 
-#pragma GCC diagnostic ignored "-Wunused-function"                
-#pragma GCC diagnostic ignored "-Wunused-macros"                  
-#pragma GCC diagnostic ignored "-Wunused-parameter"               
-#elif defined __SUNPRO_CC                                         
-#pragma disable_warn                                              
-#elif defined _MSC_VER                                            
-#pragma warning(push, 1)                                          
-#endif                                                            
+#if defined __GNUC__ && 402 <= __GNUC__ * 100 + __GNUC_MINOR__
+#pragma GCC diagnostic ignored "-Wconversion"
+#pragma GCC diagnostic ignored "-Wimplicit-function-declaration"
+#pragma GCC diagnostic ignored "-Wlarger-than="
+#pragma GCC diagnostic ignored "-Wmissing-prototypes"
+#pragma GCC diagnostic ignored "-Wnested-externs"
+#pragma GCC diagnostic ignored "-Wold-style-definition"
+#pragma GCC diagnostic ignored "-Wredundant-decls"
+#pragma GCC diagnostic ignored "-Wsign-compare"
+#pragma GCC diagnostic ignored "-Wsign-conversion"
+#pragma GCC diagnostic ignored "-Wstrict-overflow"
+#pragma GCC diagnostic ignored "-Wstrict-prototypes"
+#pragma GCC diagnostic ignored "-Wsuggest-attribute=pure"
+#pragma GCC diagnostic ignored "-Wswitch-default"
+#pragma GCC diagnostic ignored "-Wunused-function"
+#pragma GCC diagnostic ignored "-Wunused-macros"
+#pragma GCC diagnostic ignored "-Wunused-parameter"
+#elif defined __SUNPRO_CC
+#pragma disable_warn
+#elif defined _MSC_VER
+#pragma warning(push, 1)
+#endif
 #line 2 "hl/src/H5LTanalyze.c"
 
 #line 4 "hl/src/H5LTanalyze.c"
@@ -75,7 +75,7 @@
 #if defined (__STDC_VERSION__) && __STDC_VERSION__ >= 199901L
 
 /* C99 says to define __STDC_LIMIT_MACROS before including stdint.h,
- * if you want the limit (max/min) macros for int types. 
+ * if you want the limit (max/min) macros for int types.
  */
 #ifndef __STDC_LIMIT_MACROS
 #define __STDC_LIMIT_MACROS 1
@@ -92,7 +92,7 @@ typedef uint32_t flex_uint32_t;
 typedef signed char flex_int8_t;
 typedef short int flex_int16_t;
 typedef int flex_int32_t;
-typedef unsigned char flex_uint8_t; 
+typedef unsigned char flex_uint8_t;
 typedef unsigned short int flex_uint16_t;
 typedef unsigned int flex_uint32_t;
 
@@ -209,7 +209,7 @@ extern FILE *H5LTyyin, *H5LTyyout;
 #define EOB_ACT_LAST_MATCH 2
 
     #define YY_LESS_LINENO(n)
-    
+
 /* Return all but the first "n" matched characters back to the input stream. */
 #define yyless(n) \
 	do \
@@ -266,7 +266,7 @@ struct yy_buffer_state
 
     int yy_bs_lineno; /**< The line count. */
     int yy_bs_column; /**< The column count. */
-    
+
 	/* Whether to try to fill the input buffer when we reach the
 	 * end of it.
 	 */
@@ -893,7 +893,7 @@ char *H5LTyytext;
 /* Turn off suggest const & malloc attribute warnings in gcc */
 #if defined __GNUC__ && 402 <= __GNUC__ * 100 + __GNUC_MINOR__
 #pragma GCC diagnostic ignored "-Wsuggest-attribute=const"
-#endif 
+#endif
 
 int my_yyinput(char *, int);
 #undef YY_INPUT
@@ -996,7 +996,7 @@ extern int H5LTyywrap (void );
 #endif
 
     static void yyunput (int c,char *buf_ptr  );
-    
+
 #ifndef yytext_ptr
 static void yy_flex_strncpy (char *,yyconst char *,int );
 #endif
@@ -1117,7 +1117,7 @@ YY_DECL
 	register yy_state_type yy_current_state;
 	register char *yy_cp, *yy_bp;
 	register int yy_act;
-    
+
 #line 82 "hl/src/H5LTanalyze.l"
 
 
@@ -1411,17 +1411,17 @@ YY_RULE_SETUP
 case 40:
 YY_RULE_SETUP
 #line 127 "hl/src/H5LTanalyze.l"
-{return token(H5T_STR_NULLTERM_TOKEN);} 
+{return token(H5T_STR_NULLTERM_TOKEN);}
 	YY_BREAK
 case 41:
 YY_RULE_SETUP
 #line 128 "hl/src/H5LTanalyze.l"
-{return token(H5T_STR_NULLPAD_TOKEN);} 
+{return token(H5T_STR_NULLPAD_TOKEN);}
 	YY_BREAK
 case 42:
 YY_RULE_SETUP
 #line 129 "hl/src/H5LTanalyze.l"
-{return token(H5T_STR_SPACEPAD_TOKEN);} 
+{return token(H5T_STR_SPACEPAD_TOKEN);}
 	YY_BREAK
 case 43:
 YY_RULE_SETUP
@@ -1486,12 +1486,12 @@ YY_RULE_SETUP
 case 55:
 YY_RULE_SETUP
 #line 145 "hl/src/H5LTanalyze.l"
-{    
-                        if( is_str_size || (is_enum && is_enum_memb) || 
+{
+                        if( is_str_size || (is_enum && is_enum_memb) ||
                             is_opq_size || (asindex>-1 && arr_stack[asindex].is_dim) ||
                             (csindex>-1 && cmpd_stack[csindex].is_field) ) {
                             H5LTyylval.ival = atoi(H5LTyytext);
-                            return NUMBER; 
+                            return NUMBER;
                         } else
                             REJECT;
                  }
@@ -1501,7 +1501,7 @@ YY_RULE_SETUP
 #line 155 "hl/src/H5LTanalyze.l"
 {
                     /*if it's first quote, and is a compound field name or an enum symbol*/
-                    if((is_opq_tag || is_enum || (csindex>-1 && cmpd_stack[csindex].is_field)) 
+                    if((is_opq_tag || is_enum || (csindex>-1 && cmpd_stack[csindex].is_field))
                         && first_quote) {
                         first_quote = 0;
                         BEGIN TAG_STRING;
@@ -1821,7 +1821,7 @@ static int yy_get_next_buffer (void)
 {
 	register yy_state_type yy_current_state;
 	register char *yy_cp;
-    
+
 	yy_current_state = (yy_start);
 
 	(yy_state_ptr) = (yy_state_buf);
@@ -1851,7 +1851,7 @@ static int yy_get_next_buffer (void)
     static yy_state_type yy_try_NUL_trans  (yy_state_type yy_current_state )
 {
 	register int yy_is_jam;
-    
+
 	register YY_CHAR yy_c = 1;
 	while ( yy_chk[yy_base[yy_current_state] + yy_c] != yy_current_state )
 		{
@@ -1870,7 +1870,7 @@ static int yy_get_next_buffer (void)
     static void yyunput (int c, register char * yy_bp )
 {
 	register char *yy_cp;
-    
+
     yy_cp = (yy_c_buf_p);
 
 	/* undo effects of setting up H5LTyytext */
@@ -1913,7 +1913,7 @@ static int yy_get_next_buffer (void)
 
 {
 	int c;
-    
+
 	*(yy_c_buf_p) = (yy_hold_char);
 
 	if ( *(yy_c_buf_p) == YY_END_OF_BUFFER_CHAR )
@@ -1980,12 +1980,12 @@ static int yy_get_next_buffer (void)
 
 /** Immediately switch to a different input stream.
  * @param input_file A readable stream.
- * 
+ *
  * @note This function does not reset the start condition to @c INITIAL .
  */
     void H5LTyyrestart  (FILE * input_file )
 {
-    
+
 	if ( ! YY_CURRENT_BUFFER ){
         H5LTyyensure_buffer_stack ();
 		YY_CURRENT_BUFFER_LVALUE =
@@ -1998,11 +1998,11 @@ static int yy_get_next_buffer (void)
 
 /** Switch to a different input buffer.
  * @param new_buffer The new input buffer.
- * 
+ *
  */
     void H5LTyy_switch_to_buffer  (YY_BUFFER_STATE  new_buffer )
 {
-    
+
 	/* TODO. We should be able to replace this entire function body
 	 * with
 	 *		H5LTyypop_buffer_state();
@@ -2042,13 +2042,13 @@ static void H5LTyy_load_buffer_state  (void)
 /** Allocate and initialize an input buffer state.
  * @param file A readable stream.
  * @param size The character buffer size in bytes. When in doubt, use @c YY_BUF_SIZE.
- * 
+ *
  * @return the allocated buffer state.
  */
     YY_BUFFER_STATE H5LTyy_create_buffer  (FILE * file, int  size )
 {
 	YY_BUFFER_STATE b;
-    
+
 	b = (YY_BUFFER_STATE) H5LTyyalloc(sizeof( struct yy_buffer_state )  );
 	if ( ! b )
 		YY_FATAL_ERROR( "out of dynamic memory in H5LTyy_create_buffer()" );
@@ -2071,11 +2071,11 @@ static void H5LTyy_load_buffer_state  (void)
 
 /** Destroy the buffer.
  * @param b a buffer created with H5LTyy_create_buffer()
- * 
+ *
  */
     void H5LTyy_delete_buffer (YY_BUFFER_STATE  b )
 {
-    
+
 	if ( ! b )
 		return;
 
@@ -2096,7 +2096,7 @@ static void H5LTyy_load_buffer_state  (void)
 
 {
 	int oerrno = errno;
-    
+
 	H5LTyy_flush_buffer(b );
 
 	b->yy_input_file = file;
@@ -2112,13 +2112,13 @@ static void H5LTyy_load_buffer_state  (void)
     }
 
         b->yy_is_interactive = file ? (isatty( fileno(file) ) > 0) : 0;
-    
+
 	errno = oerrno;
 }
 
 /** Discard all buffered characters. On the next scan, YY_INPUT will be called.
  * @param b the buffer state to be flushed, usually @c YY_CURRENT_BUFFER.
- * 
+ *
  */
     void H5LTyy_flush_buffer (YY_BUFFER_STATE  b )
 {
@@ -2147,7 +2147,7 @@ static void H5LTyy_load_buffer_state  (void)
  *  the current state. This function will allocate the stack
  *  if necessary.
  *  @param new_buffer The new state.
- *  
+ *
  */
 void H5LTyypush_buffer_state (YY_BUFFER_STATE new_buffer )
 {
@@ -2177,7 +2177,7 @@ void H5LTyypush_buffer_state (YY_BUFFER_STATE new_buffer )
 
 /** Removes and deletes the top of the stack, if present.
  *  The next element becomes the new top.
- *  
+ *
  */
 void H5LTyypop_buffer_state (void)
 {
@@ -2201,7 +2201,7 @@ void H5LTyypop_buffer_state (void)
 static void H5LTyyensure_buffer_stack (void)
 {
 	yy_size_t num_to_alloc;
-    
+
 	if (!(yy_buffer_stack)) {
 
 		/* First allocation is just for 2 elements, since we don't know if this
@@ -2214,9 +2214,9 @@ static void H5LTyyensure_buffer_stack (void)
 								);
 		if ( ! (yy_buffer_stack) )
 			YY_FATAL_ERROR( "out of dynamic memory in H5LTyyensure_buffer_stack()" );
-								  
+
 		memset((yy_buffer_stack), 0, num_to_alloc * sizeof(struct yy_buffer_state*));
-				
+
 		(yy_buffer_stack_max) = num_to_alloc;
 		(yy_buffer_stack_top) = 0;
 		return;
@@ -2244,13 +2244,13 @@ static void H5LTyyensure_buffer_stack (void)
 /** Setup the input buffer state to scan directly from a user-specified character buffer.
  * @param base the character buffer
  * @param size the size in bytes of the character buffer
- * 
- * @return the newly allocated buffer state object. 
+ *
+ * @return the newly allocated buffer state object.
  */
 YY_BUFFER_STATE H5LTyy_scan_buffer  (char * base, yy_size_t  size )
 {
 	YY_BUFFER_STATE b;
-    
+
 	if ( size < 2 ||
 	     base[size-2] != YY_END_OF_BUFFER_CHAR ||
 	     base[size-1] != YY_END_OF_BUFFER_CHAR )
@@ -2279,14 +2279,14 @@ YY_BUFFER_STATE H5LTyy_scan_buffer  (char * base, yy_size_t  size )
 /** Setup the input buffer state to scan a string. The next call to H5LTyylex() will
  * scan from a @e copy of @a str.
  * @param yystr a NUL-terminated string to scan
- * 
+ *
  * @return the newly allocated buffer state object.
  * @note If you want to scan bytes that may contain NUL values, then use
  *       H5LTyy_scan_bytes() instead.
  */
 YY_BUFFER_STATE H5LTyy_scan_string (yyconst char * yystr )
 {
-    
+
 	return H5LTyy_scan_bytes(yystr,strlen(yystr) );
 }
 
@@ -2294,7 +2294,7 @@ YY_BUFFER_STATE H5LTyy_scan_string (yyconst char * yystr )
  * scan from a @e copy of @a bytes.
  * @param yybytes the byte buffer to scan
  * @param _yybytes_len the number of bytes in the buffer pointed to by @a bytes.
- * 
+ *
  * @return the newly allocated buffer state object.
  */
 YY_BUFFER_STATE H5LTyy_scan_bytes  (yyconst char * yybytes, yy_size_t  _yybytes_len )
@@ -2303,7 +2303,7 @@ YY_BUFFER_STATE H5LTyy_scan_bytes  (yyconst char * yybytes, yy_size_t  _yybytes_
 	char *buf;
 	yy_size_t n;
 	int i;
-    
+
 	/* Get memory for full buffer, including space for trailing EOB's. */
 	n = _yybytes_len + 2;
 	buf = (char *) H5LTyyalloc(n  );
@@ -2357,16 +2357,16 @@ static void yy_fatal_error (yyconst char* msg )
 /* Accessor  methods (get/set functions) to struct members. */
 
 /** Get the current line number.
- * 
+ *
  */
 int H5LTyyget_lineno  (void)
 {
-        
+
     return H5LTyylineno;
 }
 
 /** Get the input stream.
- * 
+ *
  */
 FILE *H5LTyyget_in  (void)
 {
@@ -2374,7 +2374,7 @@ FILE *H5LTyyget_in  (void)
 }
 
 /** Get the output stream.
- * 
+ *
  */
 FILE *H5LTyyget_out  (void)
 {
@@ -2382,7 +2382,7 @@ FILE *H5LTyyget_out  (void)
 }
 
 /** Get the length of the current token.
- * 
+ *
  */
 yy_size_t H5LTyyget_leng  (void)
 {
@@ -2390,7 +2390,7 @@ yy_size_t H5LTyyget_leng  (void)
 }
 
 /** Get the current token.
- * 
+ *
  */
 
 char *H5LTyyget_text  (void)
@@ -2400,18 +2400,18 @@ char *H5LTyyget_text  (void)
 
 /** Set the current line number.
  * @param line_number
- * 
+ *
  */
 void H5LTyyset_lineno (int  line_number )
 {
-    
+
     H5LTyylineno = line_number;
 }
 
 /** Set the input stream. This does not discard the current
  * input buffer.
  * @param in_str A readable stream.
- * 
+ *
  * @see H5LTyy_switch_to_buffer
  */
 void H5LTyyset_in (FILE *  in_str )
@@ -2470,7 +2470,7 @@ static int yy_init_globals (void)
 /* H5LTyylex_destroy is for both reentrant and non-reentrant scanners. */
 int H5LTyylex_destroy  (void)
 {
-    
+
     /* Pop the buffer stack, destroying each element. */
 	while(YY_CURRENT_BUFFER){
 		H5LTyy_delete_buffer(YY_CURRENT_BUFFER  );
@@ -2546,8 +2546,8 @@ void H5LTyyfree (void * ptr )
 int my_yyinput(char *buf, int max_size)
 {
    int ret;
-    
-   memcpy(buf, myinput, input_len); 
+
+   memcpy(buf, myinput, input_len);
    ret = (int)input_len;
    return ret;
 }
diff --git a/hl/src/H5LTparse.c b/hl/src/H5LTparse.c
index 0275917..d8661a7 100644
--- a/hl/src/H5LTparse.c
+++ b/hl/src/H5LTparse.c
@@ -1,41 +1,41 @@
-#if defined __GNUC__ && 402 <= __GNUC__ * 100 + __GNUC_MINOR__    
-#pragma GCC diagnostic ignored "-Wconversion"                     
-#pragma GCC diagnostic ignored "-Wimplicit-function-declaration"  
-#pragma GCC diagnostic ignored "-Wlarger-than="                   
-#pragma GCC diagnostic ignored "-Wmissing-prototypes"             
-#pragma GCC diagnostic ignored "-Wnested-externs"                 
-#pragma GCC diagnostic ignored "-Wold-style-definition"           
-#pragma GCC diagnostic ignored "-Wredundant-decls"                
-#pragma GCC diagnostic ignored "-Wsign-compare"                   
-#pragma GCC diagnostic ignored "-Wsign-conversion"                
-#pragma GCC diagnostic ignored "-Wstrict-overflow"                
-#pragma GCC diagnostic ignored "-Wstrict-prototypes"              
-#pragma GCC diagnostic ignored "-Wsuggest-attribute=pure"         
-#pragma GCC diagnostic ignored "-Wswitch-default"                 
-#pragma GCC diagnostic ignored "-Wunused-function"                
-#pragma GCC diagnostic ignored "-Wunused-macros"                  
-#pragma GCC diagnostic ignored "-Wunused-parameter"               
-#elif defined __SUNPRO_CC                                         
-#pragma disable_warn                                              
-#elif defined _MSC_VER                                            
-#pragma warning(push, 1)                                          
-#endif                                                            
+#if defined __GNUC__ && 402 <= __GNUC__ * 100 + __GNUC_MINOR__
+#pragma GCC diagnostic ignored "-Wconversion"
+#pragma GCC diagnostic ignored "-Wimplicit-function-declaration"
+#pragma GCC diagnostic ignored "-Wlarger-than="
+#pragma GCC diagnostic ignored "-Wmissing-prototypes"
+#pragma GCC diagnostic ignored "-Wnested-externs"
+#pragma GCC diagnostic ignored "-Wold-style-definition"
+#pragma GCC diagnostic ignored "-Wredundant-decls"
+#pragma GCC diagnostic ignored "-Wsign-compare"
+#pragma GCC diagnostic ignored "-Wsign-conversion"
+#pragma GCC diagnostic ignored "-Wstrict-overflow"
+#pragma GCC diagnostic ignored "-Wstrict-prototypes"
+#pragma GCC diagnostic ignored "-Wsuggest-attribute=pure"
+#pragma GCC diagnostic ignored "-Wswitch-default"
+#pragma GCC diagnostic ignored "-Wunused-function"
+#pragma GCC diagnostic ignored "-Wunused-macros"
+#pragma GCC diagnostic ignored "-Wunused-parameter"
+#elif defined __SUNPRO_CC
+#pragma disable_warn
+#elif defined _MSC_VER
+#pragma warning(push, 1)
+#endif
 /* A Bison parser, made by GNU Bison 2.7.  */
 
 /* Bison implementation for Yacc-like parsers in C
-   
+
       Copyright (C) 1984, 1989-1990, 2000-2012 Free Software Foundation, Inc.
-   
+
    This program is free software: you can redistribute it and/or modify
    it under the terms of the GNU General Public License as published by
    the Free Software Foundation, either version 3 of the License, or
    (at your option) any later version.
-   
+
    This program is distributed in the hope that it will be useful,
    but WITHOUT ANY WARRANTY; without even the implied warranty of
    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
    GNU General Public License for more details.
-   
+
    You should have received a copy of the GNU General Public License
    along with this program.  If not, see <http://www.gnu.org/licenses/>.  */
 
@@ -48,7 +48,7 @@
    special exception, which will cause the skeleton and the resulting
    Bison output files to be licensed under the GNU General Public
    License without this special exception.
-   
+
    This special exception was added by the Free Software Foundation in
    version 2.2 of Bison.  */
 
@@ -127,7 +127,7 @@ struct arr_info {
 };
 /*stack for nested array type*/
 struct arr_info arr_stack[STACK_SIZE];
-int asindex = -1;               /*pointer to the top of array stack*/ 
+int asindex = -1;               /*pointer to the top of array stack*/
 
 hbool_t     is_str_size = 0;        /*flag to lexer for string size*/
 hbool_t     is_str_pad = 0;         /*flag to lexer for string padding*/
@@ -135,7 +135,7 @@ H5T_str_t   str_pad;                /*variable for string padding*/
 H5T_cset_t  str_cset;               /*variable for string character set*/
 hbool_t     is_variable = 0;        /*variable for variable-length string*/
 size_t      str_size;               /*variable for string size*/
-   
+
 hid_t       enum_id;                /*type ID*/
 hbool_t     is_enum = 0;            /*flag to lexer for enum type*/
 hbool_t     is_enum_memb = 0;       /*flag to lexer for enum member*/
@@ -1868,9 +1868,9 @@ yyreduce:
   case 48:
 /* Line 1792 of yacc.c  */
 #line 161 "hl/src/H5LTparse.y"
-    { (yyval.hid) = cmpd_stack[csindex].id; 
+    { (yyval.hid) = cmpd_stack[csindex].id;
                               cmpd_stack[csindex].id = 0;
-                              cmpd_stack[csindex].first_memb = 1; 
+                              cmpd_stack[csindex].first_memb = 1;
                               csindex--;
                             }
     break;
@@ -1884,7 +1884,7 @@ yyreduce:
   case 52:
 /* Line 1792 of yacc.c  */
 #line 172 "hl/src/H5LTparse.y"
-    {   
+    {
                             size_t origin_size, new_size;
                             hid_t dtype_id = cmpd_stack[csindex].id;
 
@@ -1898,7 +1898,7 @@ yyreduce:
                                 cmpd_stack[csindex].first_memb = 0;
                             } else {
                                 origin_size = H5Tget_size(dtype_id);
-                                
+
                                 if((yyvsp[(6) - (7)].ival) == 0) {
                                     new_size = origin_size + H5Tget_size((yyvsp[(1) - (7)].hid));
                                     H5Tset_size(dtype_id, new_size);
@@ -1915,7 +1915,7 @@ yyreduce:
                             }
                             cmpd_stack[csindex].is_field = 0;
                             H5Tclose((yyvsp[(1) - (7)].hid));
-                             
+
                             new_size = H5Tget_size(dtype_id);
                         }
     break;
@@ -1951,7 +1951,7 @@ yyreduce:
   case 58:
 /* Line 1792 of yacc.c  */
 #line 223 "hl/src/H5LTparse.y"
-    { 
+    {
                           (yyval.hid) = H5Tarray_create2((yyvsp[(5) - (6)].hid), arr_stack[asindex].ndims, arr_stack[asindex].dims);
                           arr_stack[asindex].ndims = 0;
                           asindex--;
@@ -1969,9 +1969,9 @@ yyreduce:
 /* Line 1792 of yacc.c  */
 #line 234 "hl/src/H5LTparse.y"
     { unsigned ndims = arr_stack[asindex].ndims;
-                                  arr_stack[asindex].dims[ndims] = (hsize_t)yylval.ival; 
+                                  arr_stack[asindex].dims[ndims] = (hsize_t)yylval.ival;
                                   arr_stack[asindex].ndims++;
-                                  arr_stack[asindex].is_dim = 0; 
+                                  arr_stack[asindex].is_dim = 0;
                                 }
     break;
 
@@ -1990,10 +1990,10 @@ yyreduce:
   case 67:
 /* Line 1792 of yacc.c  */
 #line 251 "hl/src/H5LTparse.y"
-    {   
+    {
                                 size_t size = (size_t)yylval.ival;
                                 (yyval.hid) = H5Tcreate(H5T_OPAQUE, size);
-                                is_opq_size = 0;    
+                                is_opq_size = 0;
                             }
     break;
 
@@ -2006,7 +2006,7 @@ yyreduce:
   case 69:
 /* Line 1792 of yacc.c  */
 #line 257 "hl/src/H5LTparse.y"
-    {  
+    {
                                 H5Tset_tag((yyvsp[(7) - (13)].hid), yylval.sval);
                                 free(yylval.sval);
                                 yylval.sval = NULL;
@@ -2029,12 +2029,12 @@ yyreduce:
   case 74:
 /* Line 1792 of yacc.c  */
 #line 272 "hl/src/H5LTparse.y"
-    {  
+    {
                                 if((yyvsp[(5) - (6)].ival) == H5T_VARIABLE_TOKEN)
                                     is_variable = 1;
-                                else 
+                                else
                                     str_size = yylval.ival;
-                                is_str_size = 0; 
+                                is_str_size = 0;
                             }
     break;
 
@@ -2054,7 +2054,7 @@ yyreduce:
   case 76:
 /* Line 1792 of yacc.c  */
 #line 289 "hl/src/H5LTparse.y"
-    {  
+    {
                                 if((yyvsp[(13) - (14)].ival) == H5T_CSET_ASCII_TOKEN)
                                     str_cset = H5T_CSET_ASCII;
                                 else if((yyvsp[(13) - (14)].ival) == H5T_CSET_UTF8_TOKEN)
@@ -2076,7 +2076,7 @@ yyreduce:
   case 78:
 /* Line 1792 of yacc.c  */
 #line 303 "hl/src/H5LTparse.y"
-    {   
+    {
                                 hid_t str_id = (yyvsp[(19) - (20)].hid);
 
                                 /*set string size*/
@@ -2085,12 +2085,12 @@ yyreduce:
                                     is_variable = 0;
                                 } else
                                     H5Tset_size(str_id, str_size);
-                                
+
                                 /*set string padding and character set*/
                                 H5Tset_strpad(str_id, str_pad);
                                 H5Tset_cset(str_id, str_cset);
 
-                                (yyval.hid) = str_id; 
+                                (yyval.hid) = str_id;
                             }
     break;
 
@@ -2160,9 +2160,9 @@ yyreduce:
     {
                                                 is_enum_memb = 1; /*indicate member of enum*/
 #ifdef H5_HAVE_WIN32_API
-                                                enum_memb_symbol = _strdup(yylval.sval); 
+                                                enum_memb_symbol = _strdup(yylval.sval);
 #else /* H5_HAVE_WIN32_API */
-                                                enum_memb_symbol = strdup(yylval.sval); 
+                                                enum_memb_symbol = strdup(yylval.sval);
 #endif  /* H5_HAVE_WIN32_API */
                                                 free(yylval.sval);
                                                 yylval.sval = NULL;
@@ -2182,32 +2182,32 @@ yyreduce:
                                 hid_t native = H5Tget_native_type(super, H5T_DIR_ASCEND);
                                 H5T_order_t super_order = H5Tget_order(super);
                                 H5T_order_t native_order = H5Tget_order(native);
- 
+
                                 if(is_enum && is_enum_memb) { /*if it's an enum member*/
                                     /*To handle machines of different endianness*/
                                     if(H5Tequal(native, H5T_NATIVE_SCHAR) || H5Tequal(native, H5T_NATIVE_UCHAR)) {
                                         if(super_order != native_order)
-                                            H5Tconvert(native, super, 1, &char_val, NULL, H5P_DEFAULT); 
+                                            H5Tconvert(native, super, 1, &char_val, NULL, H5P_DEFAULT);
                                         H5Tenum_insert(enum_id, enum_memb_symbol, &char_val);
                                     } else if(H5Tequal(native, H5T_NATIVE_SHORT) || H5Tequal(native, H5T_NATIVE_USHORT)) {
                                         if(super_order != native_order)
-                                            H5Tconvert(native, super, 1, &short_val, NULL, H5P_DEFAULT); 
+                                            H5Tconvert(native, super, 1, &short_val, NULL, H5P_DEFAULT);
                                         H5Tenum_insert(enum_id, enum_memb_symbol, &short_val);
                                     } else if(H5Tequal(native, H5T_NATIVE_INT) || H5Tequal(native, H5T_NATIVE_UINT)) {
                                         if(super_order != native_order)
-                                            H5Tconvert(native, super, 1, &int_val, NULL, H5P_DEFAULT); 
+                                            H5Tconvert(native, super, 1, &int_val, NULL, H5P_DEFAULT);
                                         H5Tenum_insert(enum_id, enum_memb_symbol, &int_val);
                                     } else if(H5Tequal(native, H5T_NATIVE_LONG) || H5Tequal(native, H5T_NATIVE_ULONG)) {
                                         if(super_order != native_order)
-                                            H5Tconvert(native, super, 1, &long_val, NULL, H5P_DEFAULT); 
+                                            H5Tconvert(native, super, 1, &long_val, NULL, H5P_DEFAULT);
                                         H5Tenum_insert(enum_id, enum_memb_symbol, &long_val);
                                     } else if(H5Tequal(native, H5T_NATIVE_LLONG) || H5Tequal(native, H5T_NATIVE_ULLONG)) {
                                         if(super_order != native_order)
-                                            H5Tconvert(native, super, 1, &llong_val, NULL, H5P_DEFAULT); 
+                                            H5Tconvert(native, super, 1, &llong_val, NULL, H5P_DEFAULT);
                                         H5Tenum_insert(enum_id, enum_memb_symbol, &llong_val);
                                     }
 
-                                    is_enum_memb = 0; 
+                                    is_enum_memb = 0;
                                     if(enum_memb_symbol) free(enum_memb_symbol);
                                 }
 
diff --git a/hl/src/H5LTparse.h b/hl/src/H5LTparse.h
index 30c5ea8..0ecd15d 100644
--- a/hl/src/H5LTparse.h
+++ b/hl/src/H5LTparse.h
@@ -1,19 +1,19 @@
 /* A Bison parser, made by GNU Bison 2.7.  */
 
 /* Bison interface for Yacc-like parsers in C
-   
+
       Copyright (C) 1984, 1989-1990, 2000-2012 Free Software Foundation, Inc.
-   
+
    This program is free software: you can redistribute it and/or modify
    it under the terms of the GNU General Public License as published by
    the Free Software Foundation, either version 3 of the License, or
    (at your option) any later version.
-   
+
    This program is distributed in the hope that it will be useful,
    but WITHOUT ANY WARRANTY; without even the implied warranty of
    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
    GNU General Public License for more details.
-   
+
    You should have received a copy of the GNU General Public License
    along with this program.  If not, see <http://www.gnu.org/licenses/>.  */
 
@@ -26,7 +26,7 @@
    special exception, which will cause the skeleton and the resulting
    Bison output files to be licensed under the GNU General Public
    License without this special exception.
-   
+
    This special exception was added by the Free Software Foundation in
    version 2.2 of Bison.  */
 
diff --git a/hl/src/H5LTpublic.h b/hl/src/H5LTpublic.h
index 47be98a..6df7c4b 100644
--- a/hl/src/H5LTpublic.h
+++ b/hl/src/H5LTpublic.h
@@ -20,7 +20,7 @@
 /* user supplied image buffer. The same image is open with the core driver.  */
 #define H5LT_FILE_IMAGE_DONT_RELEASE 0x0004 /* The HDF5 lib won't        */
 /* deallocate user supplied image buffer. The user application is reponsible */
-/* for doing so.                                                             */ 
+/* for doing so.                                                             */
 #define H5LT_FILE_IMAGE_ALL          0x0007
 
 typedef enum H5LT_lang_t {
diff --git a/hl/src/H5TB.c b/hl/src/H5TB.c
index a4bcbd4..c54c41f 100644
--- a/hl/src/H5TB.c
+++ b/hl/src/H5TB.c
@@ -102,7 +102,7 @@ herr_t H5TBmake_table(const char *table_title,
     if (field_names == NULL) {
       goto out;
     }
-    
+
     dims[0]       = nrecords;
     dims_chunk[0] = chunk_size;
 
@@ -300,7 +300,7 @@ herr_t H5TBappend_records(hid_t loc_id,
     herr_t   ret_val = -1;
 
     /* check the arguments */
-    if (dset_name == NULL) 
+    if (dset_name == NULL)
         goto out;
 
     /* get the original number of records and fields  */
@@ -374,7 +374,7 @@ herr_t H5TBwrite_records(hid_t loc_id,
     herr_t   ret_val = -1;
 
     /* check the arguments */
-    if (dset_name == NULL) 
+    if (dset_name == NULL)
         goto out;
 
     /* open the dataset. */
@@ -477,9 +477,9 @@ herr_t H5TBwrite_fields_name(hid_t loc_id,
     herr_t   ret_val = -1;
 
     /* check the arguments */
-    if (dset_name == NULL) 
+    if (dset_name == NULL)
         goto out;
-    if (field_names == NULL) 
+    if (field_names == NULL)
         goto out;
 
     /* create xfer properties to preserve initialized data */
@@ -640,7 +640,7 @@ herr_t H5TBwrite_fields_index(hid_t loc_id,
     herr_t   ret_val = -1;
 
     /* check the arguments */
-    if (dset_name == NULL) 
+    if (dset_name == NULL)
         goto out;
 
     /* create xfer properties to preserve initialized data */
@@ -801,7 +801,7 @@ herr_t H5TBread_table(hid_t loc_id,
     herr_t   ret_val = -1;
 
     /* check the arguments */
-    if (dset_name == NULL) 
+    if (dset_name == NULL)
         goto out;
 
     /* open the dataset. */
@@ -878,7 +878,7 @@ herr_t H5TBread_records(hid_t loc_id,
     herr_t   ret_val = -1;
 
     /* check the arguments */
-    if (dset_name == NULL) 
+    if (dset_name == NULL)
         goto out;
 
     /* get the number of records and fields  */
@@ -959,9 +959,9 @@ herr_t H5TBread_fields_name(hid_t loc_id,
 
 
     /* check the arguments */
-    if (dset_name == NULL) 
+    if (dset_name == NULL)
         goto out;
-    if (field_names == NULL) 
+    if (field_names == NULL)
         goto out;
 
     /* open the dataset */
@@ -1029,7 +1029,7 @@ herr_t H5TBread_fields_name(hid_t loc_id,
     /* check to make sure field was found, no reason to continue if it does not exist */
     if(j == 0)
       goto out;
-    
+
     /* get the dataspace handle */
     if((sid = H5Dget_space(did)) < 0)
         goto out;
@@ -1121,7 +1121,7 @@ herr_t H5TBread_fields_index(hid_t loc_id,
     herr_t   ret_val = -1;
 
     /* check the arguments */
-    if (dset_name == NULL) 
+    if (dset_name == NULL)
         goto out;
 
     /* open the dataset. */
@@ -1281,9 +1281,9 @@ herr_t H5TBdelete_record(hid_t loc_id,
     unsigned char *tmp_buf = NULL;
     herr_t   ret_val = -1;
 
-    
+
     /* check the arguments */
-    if (dset_name == NULL) 
+    if (dset_name == NULL)
         goto out;
 
     /*-------------------------------------------------------------------------
@@ -1446,7 +1446,7 @@ herr_t H5TBinsert_record(hid_t loc_id,
     herr_t   ret_val = -1;
 
     /* check the arguments */
-    if (dset_name == NULL) 
+    if (dset_name == NULL)
         goto out;
 
     /*-------------------------------------------------------------------------
@@ -1601,9 +1601,9 @@ herr_t H5TBadd_records_from(hid_t loc_id,
     herr_t   ret_val = -1;
 
     /* check the arguments */
-    if (dset_name1 == NULL) 
+    if (dset_name1 == NULL)
       goto out;
-    if (dset_name2 == NULL) 
+    if (dset_name2 == NULL)
       goto out;
 
     /*-------------------------------------------------------------------------
@@ -1754,11 +1754,11 @@ herr_t H5TBcombine_tables(hid_t loc_id1,
     herr_t   ret_val = -1;
 
     /* check the arguments */
-    if (dset_name1 == NULL) 
+    if (dset_name1 == NULL)
       goto out;
-    if (dset_name2 == NULL) 
+    if (dset_name2 == NULL)
       goto out;
-    if (dset_name3 == NULL) 
+    if (dset_name3 == NULL)
       goto out;
 
     /*-------------------------------------------------------------------------
@@ -2117,9 +2117,9 @@ herr_t H5TBinsert_field(hid_t loc_id,
     herr_t   ret_val = -1;
 
     /* check the arguments */
-    if (dset_name == NULL) 
+    if (dset_name == NULL)
         goto out;
-    if (field_name == NULL) 
+    if (field_name == NULL)
         goto out;
 
     /* get the number of records and fields  */
@@ -2532,9 +2532,9 @@ herr_t H5TBdelete_field(hid_t loc_id,
 
 
     /* check the arguments */
-    if (dset_name == NULL) 
+    if (dset_name == NULL)
         goto out;
-    if (field_name == NULL) 
+    if (field_name == NULL)
         goto out;
 
     /* get the number of records and fields  */
@@ -2982,7 +2982,7 @@ htri_t H5TBAget_fill(hid_t loc_id,
     htri_t   ret_val = -1;
 
     /* check the arguments */
-    if (dset_name == NULL) 
+    if (dset_name == NULL)
         goto out;
 
     /* get the number of records and fields  */
@@ -3014,7 +3014,7 @@ htri_t H5TBAget_fill(hid_t loc_id,
 out:
     if(src_offset)
         HDfree(src_offset);
-    
+
     return ret_val;
 } /* end H5TBAget_fill() */
 
@@ -3054,7 +3054,7 @@ herr_t H5TBget_table_info(hid_t loc_id,
     herr_t     ret_val = -1;
 
     /* check the arguments */
-    if (dset_name == NULL) 
+    if (dset_name == NULL)
         goto out;
 
     /* open the dataset. */
@@ -3145,7 +3145,7 @@ herr_t H5TBget_field_info(hid_t loc_id,
     herr_t      ret_val = -1;
 
     /* check the arguments */
-    if (dset_name == NULL) 
+    if (dset_name == NULL)
         goto out;
 
     /* open the dataset. */
@@ -3253,9 +3253,9 @@ hbool_t H5TB_find_field(const char *field, const char *field_list)
     const char *end;
 
     /* check the arguments */
-    if (field == NULL) 
+    if (field == NULL)
       return FALSE;
-    if (field_list == NULL) 
+    if (field_list == NULL)
       return FALSE;
 
     while((end = HDstrstr(start, ",")) != 0) {
diff --git a/hl/test/gen_test_ld.c b/hl/test/gen_test_ld.c
index d717a47..981aded 100644
--- a/hl/test/gen_test_ld.c
+++ b/hl/test/gen_test_ld.c
@@ -13,23 +13,23 @@
 #include "H5LDprivate.h"
 
 /*
- *  WATCH.h5: file with various types of datasets for testing--                                   
+ *  WATCH.h5: file with various types of datasets for testing--
  *
- *  The following datasets are chunked, H5D_ALLOC_TIME_INCR, max. dimensional setting:       
- *      DSET_ONE: one-dimensional dataset                                                   
- *      DSET_TWO: two-dimensional dataset                                                  
- *      DSET_CMPD: one-dimensional dataset with compound type                             
+ *  The following datasets are chunked, H5D_ALLOC_TIME_INCR, max. dimensional setting:
+ *      DSET_ONE: one-dimensional dataset
+ *      DSET_TWO: two-dimensional dataset
+ *      DSET_CMPD: one-dimensional dataset with compound type
  *      DSET_CMPD_ESC: one-dimensional dataset with compound type and member names with
- *		       escape/separator characters 
- *      DSET_CMPD_TWO: two-dimensional dataset with compound type                             
- *                                                                                           
- *  The following datasets are one-dimensional, chunked, max. dimension setting:              
- *      DSET_ALLOC_EARLY: dataset with H5D_ALLOC_TIME_EARLY                                  
- *      DSET_ALLOC_LATE: dataset H5D_ALLOC_TIME_LATE                                        
- *                                                                                       
- *  The following datasets are one-dimensional:                                           
- *      DSET_NONE: fixed dimension setting, contiguous, H5D_ALLOC_TIME_LATE              
- *      DSET_NOMAX: fixed dimension setting, chunked, H5D_ALLOC_TIME_INCR      
+ *		       escape/separator characters
+ *      DSET_CMPD_TWO: two-dimensional dataset with compound type
+ *
+ *  The following datasets are one-dimensional, chunked, max. dimension setting:
+ *      DSET_ALLOC_EARLY: dataset with H5D_ALLOC_TIME_EARLY
+ *      DSET_ALLOC_LATE: dataset H5D_ALLOC_TIME_LATE
+ *
+ *  The following datasets are one-dimensional:
+ *      DSET_NONE: fixed dimension setting, contiguous, H5D_ALLOC_TIME_LATE
+ *      DSET_NOMAX: fixed dimension setting, chunked, H5D_ALLOC_TIME_INCR
  */
 #define ONE_DIMS0	10
 #define MAX_ONE_DIMS0	100
diff --git a/hl/tools/gif2h5/Makefile.am b/hl/tools/gif2h5/Makefile.am
index 9ffde58..9de2135 100644
--- a/hl/tools/gif2h5/Makefile.am
+++ b/hl/tools/gif2h5/Makefile.am
@@ -29,9 +29,9 @@ bin_PROGRAMS=gif2h5 h52gif
 h52gif_LDFLAGS = $(LT_STATIC_EXEC) $(AM_LDFLAGS)
 gif2h5_LDFLAGS = $(LT_STATIC_EXEC) $(AM_LDFLAGS)
 
-gif2h5_SOURCES=gif2hdf.c gif2mem.c decompress.c gifread.c writehdf.c 
+gif2h5_SOURCES=gif2hdf.c gif2mem.c decompress.c gifread.c writehdf.c
 
-h52gif_SOURCES=hdf2gif.c hdfgifwr.c 
+h52gif_SOURCES=hdf2gif.c hdfgifwr.c
 
 
 # Programs all depend on the hdf5 library, the tools library, and the HL
@@ -42,7 +42,7 @@ if BUILD_TESTS_CONDITIONAL
   TEST_SCRIPT=h52giftest.sh
   check_SCRIPTS=$(TEST_SCRIPT)
   noinst_PROGRAMS=h52gifgentst
-  h52gifgentst_SOURCES=h52gifgentst.c 
+  h52gifgentst_SOURCES=h52gifgentst.c
 endif
 
 CHECK_CLEANFILES+=*.h5
diff --git a/hl/tools/gif2h5/h52giftest.sh.in b/hl/tools/gif2h5/h52giftest.sh.in
index 5643e30..02c9e89 100644
--- a/hl/tools/gif2h5/h52giftest.sh.in
+++ b/hl/tools/gif2h5/h52giftest.sh.in
@@ -70,20 +70,20 @@ echo ""
 
 # Positive tests for h52gif
 echo "**validate the h52gif tool processes input correctly..."
-TESTING "./h52gif h52giftst.h5 image1.gif -i image" 
+TESTING "./h52gif h52giftst.h5 image1.gif -i image"
 TOOLTEST ./h52gif $TESTFILE1 image1.gif -i image
 echo ""
 
 # Negative tests.
 echo "**verify that the h52gif tool handles error conditions correctly..."
 # nonexisting dataset name
-TESTING "./h52gif h52giftst.h5 image.gif -i nosuch_image" 
-TOOLTESTFAIL "./h52gif $TESTFILE1 image.gif -i nosuch_image" 
+TESTING "./h52gif h52giftst.h5 image.gif -i nosuch_image"
+TOOLTESTFAIL "./h52gif $TESTFILE1 image.gif -i nosuch_image"
 # this test should have failed but it did not. Comment it out for now.
-#TESTING "./h52gif h52giftst.h5 image.gif -i palette" 
-#TOOLTESTFAIL "./h52gif $TESTFILE1 image.gif -i palette" 
-TESTING "./h52gif h52giftst.h5 image24.gif -i image24bitpixel" 
-TOOLTESTFAIL "./h52gif $TESTFILE3 image24.gif -i image24bitpixel" 
+#TESTING "./h52gif h52giftst.h5 image.gif -i palette"
+#TOOLTESTFAIL "./h52gif $TESTFILE1 image.gif -i palette"
+TESTING "./h52gif h52giftst.h5 image24.gif -i image24bitpixel"
+TOOLTESTFAIL "./h52gif $TESTFILE3 image24.gif -i image24bitpixel"
 echo ""
 
 # all done. summarize results.
diff --git a/hl/tools/h5watch/extend_dset.c b/hl/tools/h5watch/extend_dset.c
index 4dcf25e..6b59ea1 100644
--- a/hl/tools/h5watch/extend_dset.c
+++ b/hl/tools/h5watch/extend_dset.c
@@ -66,7 +66,7 @@ typedef struct set_t {
  *
  * Extending a two-dimensional dataset by action1 and action2.
  *        --action1 and action2 can be a positive # or negative # or 0.
- *  
+ *
  ***********************************************************************
  */
 static herr_t
@@ -399,12 +399,12 @@ main(int argc, const char *argv[])
     if(!HDstrcmp(dname, DSET_CMPD) || !HDstrcmp(dname, DSET_CMPD_ESC)) {
         if(extend_dset_one(fname, dname, action1) < 0)
             goto error;
-    } else if(!HDstrcmp(dname, DSET_ONE) || 
-              !HDstrcmp(dname, DSET_ALLOC_LATE) || 
+    } else if(!HDstrcmp(dname, DSET_ONE) ||
+              !HDstrcmp(dname, DSET_ALLOC_LATE) ||
               !HDstrcmp(dname, DSET_ALLOC_EARLY)) {
         if(extend_dset_one(fname, dname, action1) < 0)
             goto error;
-    } else if(!HDstrcmp(dname, DSET_TWO) || 
+    } else if(!HDstrcmp(dname, DSET_TWO) ||
               !HDstrcmp(dname, DSET_CMPD_TWO)) {
         if(extend_dset_two(fname, dname, action1, action2) < 0)
             goto error;
diff --git a/hl/tools/h5watch/h5watchgentest.c b/hl/tools/h5watch/h5watchgentest.c
index 18e15fc..19c9876 100644
--- a/hl/tools/h5watch/h5watchgentest.c
+++ b/hl/tools/h5watch/h5watchgentest.c
@@ -15,23 +15,23 @@
 #include "H5HLprivate2.h"
 
 /*
- *  WATCH.h5: file with various types of datasets for testing--                                   
+ *  WATCH.h5: file with various types of datasets for testing--
  *
- *  The following datasets are chunked, H5D_ALLOC_TIME_INCR, max. dimensional setting:       
- *      DSET_ONE: one-dimensional dataset                                                   
- *      DSET_TWO: two-dimensional dataset                                                  
- *      DSET_CMPD: one-dimensional dataset with compound type                             
+ *  The following datasets are chunked, H5D_ALLOC_TIME_INCR, max. dimensional setting:
+ *      DSET_ONE: one-dimensional dataset
+ *      DSET_TWO: two-dimensional dataset
+ *      DSET_CMPD: one-dimensional dataset with compound type
  *      DSET_CMPD_ESC: one-dimensional dataset with compound type and member names with
- *		       escape/separator characters 
- *      DSET_CMPD_TWO: two-dimensional dataset with compound type                             
- *                                                                                           
- *  The following datasets are one-dimensional, chunked, max. dimension setting:              
- *      DSET_ALLOC_EARLY: dataset with H5D_ALLOC_TIME_EARLY                                  
- *      DSET_ALLOC_LATE: dataset H5D_ALLOC_TIME_LATE                                        
- *                                                                                       
- *  The following datasets are one-dimensional:                                           
- *      DSET_NONE: fixed dimension setting, contiguous, H5D_ALLOC_TIME_LATE              
- *      DSET_NOMAX: fixed dimension setting, chunked, H5D_ALLOC_TIME_INCR      
+ *		       escape/separator characters
+ *      DSET_CMPD_TWO: two-dimensional dataset with compound type
+ *
+ *  The following datasets are one-dimensional, chunked, max. dimension setting:
+ *      DSET_ALLOC_EARLY: dataset with H5D_ALLOC_TIME_EARLY
+ *      DSET_ALLOC_LATE: dataset H5D_ALLOC_TIME_LATE
+ *
+ *  The following datasets are one-dimensional:
+ *      DSET_NONE: fixed dimension setting, contiguous, H5D_ALLOC_TIME_LATE
+ *      DSET_NOMAX: fixed dimension setting, chunked, H5D_ALLOC_TIME_INCR
  */
 #define ONE_DIMS0	10
 #define MAX_ONE_DIMS0	100
diff --git a/hl/tools/h5watch/swmr_check_compat_vfd.c b/hl/tools/h5watch/swmr_check_compat_vfd.c
index 26f76cb..608f4a8 100644
--- a/hl/tools/h5watch/swmr_check_compat_vfd.c
+++ b/hl/tools/h5watch/swmr_check_compat_vfd.c
@@ -13,7 +13,7 @@
 
 /* Purpose:     This is a small program that checks if the HDF5_DRIVER
  *              environment variable is set to a value that supports SWMR.
- *              
+ *
  *              It is intended for use in shell scripts.
  */
 
diff --git a/java/Makefile.am b/java/Makefile.am
index 51398f2..4426e3e 100644
--- a/java/Makefile.am
+++ b/java/Makefile.am
@@ -10,7 +10,7 @@
 # If you do not have access to either file, you may request a copy from
 # help@hdfgroup.org.
 #
-# 
+#
 # This makefile mostly just reinvokes make in the various subdirectories
 # but does so in the correct order.  You can alternatively invoke make from
 # each subdirectory manually.
diff --git a/java/examples/Makefile.am b/java/examples/Makefile.am
index 8ca49f2..054407c 100644
--- a/java/examples/Makefile.am
+++ b/java/examples/Makefile.am
@@ -10,7 +10,7 @@
 # If you do not have access to either file, you may request a copy from
 # help@hdfgroup.org.
 #
-# 
+#
 # This makefile mostly just reinvokes make in the various subdirectories
 # but does so in the correct order.  You can alternatively invoke make from
 # each subdirectory manually.
diff --git a/java/examples/datasets/Makefile.am b/java/examples/datasets/Makefile.am
index b442603..c5b8a5d 100644
--- a/java/examples/datasets/Makefile.am
+++ b/java/examples/datasets/Makefile.am
@@ -34,7 +34,7 @@ jarfile = jar$(PACKAGE_TARNAME)datasets.jar
 
 AM_JAVACFLAGS = $(H5_JAVACFLAGS) -deprecation
 
-TESTPACKAGE = 
+TESTPACKAGE =
 
 noinst_JAVA = \
 	H5Ex_D_Alloc.java \
diff --git a/java/examples/datatypes/Makefile.am b/java/examples/datatypes/Makefile.am
index 5e0e971..f695528 100644
--- a/java/examples/datatypes/Makefile.am
+++ b/java/examples/datatypes/Makefile.am
@@ -34,7 +34,7 @@ jarfile = jar$(PACKAGE_TARNAME)datatypes.jar
 
 AM_JAVACFLAGS = $(H5_JAVACFLAGS) -deprecation
 
-TESTPACKAGE = 
+TESTPACKAGE =
 
 noinst_JAVA = \
     H5Ex_T_Array.java \
diff --git a/java/examples/groups/Makefile.am b/java/examples/groups/Makefile.am
index 09df743..d5824e8 100644
--- a/java/examples/groups/Makefile.am
+++ b/java/examples/groups/Makefile.am
@@ -34,7 +34,7 @@ jarfile = jar$(PACKAGE_TARNAME)groups.jar
 
 AM_JAVACFLAGS = $(H5_JAVACFLAGS) -deprecation
 
-TESTPACKAGE = 
+TESTPACKAGE =
 
 noinst_JAVA = \
     H5Ex_G_Create.java \
diff --git a/java/examples/intro/Makefile.am b/java/examples/intro/Makefile.am
index 33f44c2..8c3716a 100644
--- a/java/examples/intro/Makefile.am
+++ b/java/examples/intro/Makefile.am
@@ -34,7 +34,7 @@ jarfile = jar$(PACKAGE_TARNAME)intro.jar
 
 AM_JAVACFLAGS = $(H5_JAVACFLAGS) -deprecation
 
-TESTPACKAGE = 
+TESTPACKAGE =
 
 noinst_JAVA = \
     H5_CreateAttribute.java \
diff --git a/java/src/Makefile.am b/java/src/Makefile.am
index b7ad4bd..0df48bd 100644
--- a/java/src/Makefile.am
+++ b/java/src/Makefile.am
@@ -10,7 +10,7 @@
 # If you do not have access to either file, you may request a copy from
 # help@hdfgroup.org.
 #
-# 
+#
 # This makefile mostly just reinvokes make in the various subdirectories
 # but does so in the correct order.  You can alternatively invoke make from
 # each subdirectory manually.
diff --git a/java/src/hdf/hdf5lib/structs/H5O_hdr_info_t.java b/java/src/hdf/hdf5lib/structs/H5O_hdr_info_t.java
index 8d0cc24..73aaa47 100644
--- a/java/src/hdf/hdf5lib/structs/H5O_hdr_info_t.java
+++ b/java/src/hdf/hdf5lib/structs/H5O_hdr_info_t.java
@@ -74,7 +74,7 @@ public class H5O_hdr_info_t implements Serializable {
         if (this.mesg_present != info.mesg_present)
         	return false;
         if (this.mesg_shared != info.mesg_shared)
-        	return false;        
+        	return false;
 
         return true;
     }
diff --git a/java/src/hdf/hdf5lib/structs/H5O_native_info_t.java b/java/src/hdf/hdf5lib/structs/H5O_native_info_t.java
index 4e80849..f410a7f 100644
--- a/java/src/hdf/hdf5lib/structs/H5O_native_info_t.java
+++ b/java/src/hdf/hdf5lib/structs/H5O_native_info_t.java
@@ -22,7 +22,7 @@ public class H5O_native_info_t implements Serializable {
     public H5O_hdr_info_t hdr_info; /* Object header information */
 
     /* Extra metadata storage for obj & attributes */
-    public H5_ih_info_t obj_info;   /* v1/v2 B-tree & local/fractal heap for groups, B-tree for chunked datasets */ 
+    public H5_ih_info_t obj_info;   /* v1/v2 B-tree & local/fractal heap for groups, B-tree for chunked datasets */
     public H5_ih_info_t attr_info;  /* v2 B-tree & heap for attributes */
 
     H5O_native_info_t (H5O_hdr_info_t oheader_info, H5_ih_info_t obj_info, H5_ih_info_t attr_info)
@@ -49,4 +49,4 @@ public class H5O_native_info_t implements Serializable {
 
         return true;
     }
-}
\ No newline at end of file
+}
diff --git a/java/src/hdf/hdf5lib/structs/H5O_token_t.java b/java/src/hdf/hdf5lib/structs/H5O_token_t.java
index 8ec0b7f..e6d2474 100644
--- a/java/src/hdf/hdf5lib/structs/H5O_token_t.java
+++ b/java/src/hdf/hdf5lib/structs/H5O_token_t.java
@@ -42,4 +42,4 @@ public class H5O_token_t implements Serializable {
 
         return Arrays.equals(this.data, token.data);
     }
-}
\ No newline at end of file
+}
diff --git a/java/src/jni/h5sImp.c b/java/src/jni/h5sImp.c
index 33d3c2b..3498392 100644
--- a/java/src/jni/h5sImp.c
+++ b/java/src/jni/h5sImp.c
@@ -165,7 +165,7 @@ done:
 /* 10/28/99 -- added code to copy the array -- this is not used,
  * but serves as a reminder in case we try to implement this in
  * the future....
- */ 
+ */
 /*
  *  Note:  the argument coord is actually long coord[][], which has been
  *         flattened by the caller.
diff --git a/java/src/jni/h5sImp.h b/java/src/jni/h5sImp.h
index a07d4c5..cea2ebf 100644
--- a/java/src/jni/h5sImp.h
+++ b/java/src/jni/h5sImp.h
@@ -52,7 +52,7 @@ Java_hdf_hdf5lib_H5__1H5Scopy
 /* 10/28/99 -- added code to copy the array -- this is not used,
  * but serves as a reminder in case we try to implement this in
  * the future....
- */ 
+ */
 /*
  *  Note:  the argument coord is actually long coord[][], which has been
  *         flattened by the caller.
diff --git a/java/test/Makefile.am b/java/test/Makefile.am
index 3f11933..46e6a7e 100644
--- a/java/test/Makefile.am
+++ b/java/test/Makefile.am
@@ -34,7 +34,7 @@ jarfile = jar$(PACKAGE_TARNAME)test.jar
 
 AM_JAVACFLAGS = $(H5_JAVACFLAGS) -deprecation
 
-TESTPACKAGE = 
+TESTPACKAGE =
 
 noinst_JAVA = \
 	TestH5.java \
diff --git a/java/test/TestH5Tparams.java b/java/test/TestH5Tparams.java
index 8baccd1..f2b5ab5 100644
--- a/java/test/TestH5Tparams.java
+++ b/java/test/TestH5Tparams.java
@@ -274,7 +274,7 @@ public class TestH5Tparams {
     public void testH5Tpack_invalid() throws Throwable {
         H5.H5Tpack(-1);
     }
-    
+
     @Test(expected = HDF5LibraryException.class)
     public void testH5Treclaim_invalid() throws Throwable {
         byte[] buf = new byte[2];
diff --git a/m4/aclocal_fc.f90 b/m4/aclocal_fc.f90
index 7e81a52..f0c6d68 100644
--- a/m4/aclocal_fc.f90
+++ b/m4/aclocal_fc.f90
@@ -11,12 +11,12 @@
 !   help@hdfgroup.org.                                                        *
 ! * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * *
 !
-! This file contains all the configure test programs 
+! This file contains all the configure test programs
 ! used by autotools and cmake. This avoids having to
 ! duplicate code for both cmake and autotool tests.
 ! For autotools, a program below is chosen via a
 ! sed command in aclocal_fc.m4. For cmake, a program
-! below is chosen via the macro READ_SOURCE in 
+! below is chosen via the macro READ_SOURCE in
 ! HDF5UseFortran.cmake
 !
 
@@ -88,7 +88,7 @@ PROGRAM FC_AVAIL_KINDS
       INTEGER, DIMENSION(1:10) :: list_ikinds = -1
       INTEGER, DIMENSION(1:10) :: list_rkinds = -1
       LOGICAL :: new_kind
-  
+
       OPEN(8, FILE='pac_fconftest.out', FORM='formatted')
 
       ! Find integer KINDs
@@ -157,6 +157,6 @@ END PROGRAM FC_AVAIL_KINDS
 PROGRAM FC_MPI_CHECK
   INCLUDE 'mpif.h'
   INTEGER :: comm, amode, info, fh, ierror
-  CHARACTER(LEN=1) :: filename 
+  CHARACTER(LEN=1) :: filename
   CALL MPI_File_open( comm, filename, amode, info, fh, ierror)
 END PROGRAM FC_MPI_CHECK
diff --git a/m4/aclocal_fc.m4 b/m4/aclocal_fc.m4
index ab45bbc..950d457 100644
--- a/m4/aclocal_fc.m4
+++ b/m4/aclocal_fc.m4
@@ -30,7 +30,7 @@ dnl fortran compilers for use with AC_PROG_FC that is more suitable for HPC
 dnl software packages
 AC_DEFUN([PAC_FC_SEARCH_LIST],
          [gfortran ifort pgf90 pathf90 pathf95 xlf90 xlf95 xlf2003 f90 epcf90 f95 fort lf95 g95 ifc efc gfc])
-dnl 
+dnl
 dnl PAC_PROG_FC([COMPILERS])
 dnl
 dnl COMPILERS is a space separated list of Fortran compilers to search for.
@@ -54,10 +54,10 @@ dnl ifc - An older Intel compiler
 dnl fc  - A compiler on some unknown system.  This has been removed because
 dnl       it may also be the name of a command for something other than
 dnl       the Fortran compiler (e.g., fc=file system check!)
-dnl gfortran - The GNU Fortran compiler (not the same as g95) 
+dnl gfortran - The GNU Fortran compiler (not the same as g95)
 dnl gfc - An alias for gfortran recommended in cygwin installations
 dnl NOTE: this macro suffers from a basically intractable "expanded before it
-dnl was required" problem when libtool is also used 
+dnl was required" problem when libtool is also used
 dnl [1] MPICH.org
 dnl
 
@@ -66,7 +66,7 @@ dnl See if the fortran compiler supports the intrinsic module "ISO_FORTRAN_ENV"
 AC_DEFUN([PAC_PROG_FC_ISO_FORTRAN_ENV],[
   HAVE_ISO_FORTRAN_ENV="no"
   AC_MSG_CHECKING([if Fortran compiler supports intrinsic module ISO_FORTRAN_ENV])
-  TEST_SRC="`sed -n '/PROGRAM PROG_FC_ISO_FORTRAN_ENV/,/END PROGRAM PROG_FC_ISO_FORTRAN_ENV/p' $srcdir/m4/aclocal_fc.f90`"	
+  TEST_SRC="`sed -n '/PROGRAM PROG_FC_ISO_FORTRAN_ENV/,/END PROGRAM PROG_FC_ISO_FORTRAN_ENV/p' $srcdir/m4/aclocal_fc.f90`"
   AC_LINK_IFELSE([$TEST_SRC],[AC_MSG_RESULT([yes])
      	HAVE_ISO_FORTRAN_ENV="yes"],
       [AC_MSG_RESULT([no])])
@@ -122,11 +122,11 @@ dnl Check if C_LONG_DOUBLE is different from C_DOUBLE
 
 if  test "X$FORTRAN_HAVE_C_LONG_DOUBLE" = "Xyes"; then
 AC_DEFUN([PAC_PROG_FC_C_LONG_DOUBLE_EQ_C_DOUBLE],[
-  C_LONG_DOUBLE_IS_UNIQUE_FORTRAN="no"	
+  C_LONG_DOUBLE_IS_UNIQUE_FORTRAN="no"
   AC_MSG_CHECKING([if Fortran C_LONG_DOUBLE is different from C_DOUBLE])
   TEST_SRC="`sed -n '/MODULE type_mod/,/END PROGRAM PROG_FC_C_LONG_DOUBLE_EQ_C_DOUBLE/p' $srcdir/m4/aclocal_fc.f90`"
-  AC_COMPILE_IFELSE([$TEST_SRC], [AC_MSG_RESULT([yes]) 
-            C_LONG_DOUBLE_IS_UNIQUE_FORTRAN="yes"], 
+  AC_COMPILE_IFELSE([$TEST_SRC], [AC_MSG_RESULT([yes])
+            C_LONG_DOUBLE_IS_UNIQUE_FORTRAN="yes"],
          [AC_MSG_RESULT([no])])
 ])
 fi
@@ -138,8 +138,8 @@ AC_DEFUN([PAC_PROG_FC_HAVE_F2003_REQUIREMENTS],[
    HAVE_F2003_REQUIREMENTS="no"
    AC_MSG_CHECKING([if Fortran compiler version compatible with Fortran 2003 HDF])
    TEST_SRC="`sed -n '/PROG_FC_HAVE_F2003_REQUIREMENTS/,/END PROGRAM PROG_FC_HAVE_F2003_REQUIREMENTS/p' $srcdir/m4/aclocal_fc.f90`"
-   AC_COMPILE_IFELSE([$TEST_SRC], [AC_MSG_RESULT([yes]) 
-            HAVE_F2003_REQUIREMENTS="yes"], 
+   AC_COMPILE_IFELSE([$TEST_SRC], [AC_MSG_RESULT([yes])
+            HAVE_F2003_REQUIREMENTS="yes"],
          [AC_MSG_RESULT([no])])
 ])
 
@@ -262,7 +262,7 @@ TEST_SRC="`sed -n '/PROGRAM FC_AVAIL_KINDS/,/END PROGRAM FC_AVAIL_KINDS/p' $srcd
 AC_RUN_IFELSE([$TEST_SRC],
  [
     if test -s pac_fconftest.out ; then
-	
+
      dnl The output from the above program will be:
      dnl    -- LINE 1 --  valid integer kinds (comma seperated list)
      dnl    -- LINE 2 --  valid real kinds (comma seperated list)
@@ -453,7 +453,7 @@ rm -f pac_Cconftest.out
                 #define C_FLT128_DIG 0
                 #endif
                 #if defined (__STDC_VERSION__) && __STDC_VERSION__ >= 199901L
-                #define C_LDBL_DIG DECIMAL_DIG 
+                #define C_LDBL_DIG DECIMAL_DIG
                 #else
                 #define C_LDBL_DIG LDBL_DIG
                 #endif
@@ -465,7 +465,7 @@ rm -f pac_Cconftest.out
         ])
         AC_RUN_IFELSE([],[
             if test -s pac_Cconftest.out ; then
-	        LDBL_DIG="`sed -n '1p' pac_Cconftest.out`" 
+	        LDBL_DIG="`sed -n '1p' pac_Cconftest.out`"
 	        FLT128_DIG="`sed -n '2p' pac_Cconftest.out`"
             else
                 AC_MSG_ERROR([No output from C decimal precision program!])
diff --git a/release_docs/HISTORY-1_0-1_8_0_rc3.txt b/release_docs/HISTORY-1_0-1_8_0_rc3.txt
index 964d374..9c1ba12 100644
--- a/release_docs/HISTORY-1_0-1_8_0_rc3.txt
+++ b/release_docs/HISTORY-1_0-1_8_0_rc3.txt
@@ -27,7 +27,7 @@ CONTENTS
 4.      Changes from Release 1.0.0 to Release 1.0.1
 3.      Changes from the Beta 1.0.0 Release to Release 1.0.0
 2.      Changes from the Second Alpha 1.0.0 Release to the Beta 1.0.0 Release
-1.      Changes from the First Alpha 1.0.0 Release to the 
+1.      Changes from the First Alpha 1.0.0 Release to the
                 Second Alpha 1.0.0 Release
 
 [Search on the string '%%%%' for per-release section breaks.]
@@ -35,15 +35,15 @@ CONTENTS
 %%%%1.8.0-rc3%%%%   Changes from 1.6.0 to 1.8.0-rc3
 
 
-HDF5 version 1.8.0-rc3 
+HDF5 version 1.8.0-rc3
 ================================================================================
 
 
 INTRODUCTION
 
 This document describes the differences between HDF5-1.6.* and
-Hdf5 1.8.0 release candidate "HDF5-1.8.0-rc3", and contains information 
-on the platforms tested and known problems in HDF5-1.8.0-rc3. 
+Hdf5 1.8.0 release candidate "HDF5-1.8.0-rc3", and contains information
+on the platforms tested and known problems in HDF5-1.8.0-rc3.
 For more details check the HISTORY.txt file in the HDF5 source.
 
 
@@ -51,7 +51,7 @@ Links to HDF5 1.8.0-rc3 source code, documentation, and additional materials
 can be found on THG's development server (www.hdfgroup.uiuc.edu) at the
 following location:
      http://www.hdfgroup.uiuc.edu/HDF5/release/beta/obtain518.html
-User documentation for the beta can be accessed directly at this location: 
+User documentation for the beta can be accessed directly at this location:
      http://www.hdfgroup.uiuc.edu/HDF5/doc_1.8pre/doc/
 
 New features of the upcoming 1.8.0 release are described in
@@ -66,7 +66,7 @@ and will be listed in the "HDF5 Software Changes" document:
 
 
 For more information, see the HDF5 home page:
-   
+
     http://www.hdfgroup.org/HDF5/
 
 If you have any questions or comments, please send them to the HDF Help Desk:
@@ -89,13 +89,13 @@ New Features
     Configuration:
     --------------
         - Removed stream-vfd from the HDF5 library. - AKC 2007/11/19.
-        - Updated versions of autotools. HDF5 now uses automake 1.10.0, 
+        - Updated versions of autotools. HDF5 now uses automake 1.10.0,
           autoconf 2.61, and libtool 1.5.22. MAM - 2007/7/25.
         - Changed default fortran compiler to g95 when gcc is used. - AKC
           2007/2/17.
         - 'make check-vfd' can now be run from the top level directory. Not all
           tests that 'make check' invokes work with certain Virtual File Drivers,
-          so those tests have been skipped. - MAM 2006/7/17  
+          so those tests have been skipped. - MAM 2006/7/17
         - Added the variable HDF5TestExpress to control how long tests run.
           Setting it to a value between 0 and 3 controls how thoroughly the
           library is tested, with 0 being an "exhaustive run" and 3 being a
@@ -105,8 +105,8 @@ New Features
           tested during 'make install'. -MAM 2006/06/21
         - Added support to explicity enable stream_vfd or shared libraries
           when using parallel via the '--enable-stream_vfd' and
-          '--enable-shared' options, respectively. If not explicity defined, 
-          These settings default to enabled when parallel is not used, 
+          '--enable-shared' options, respectively. If not explicity defined,
+          These settings default to enabled when parallel is not used,
           and disabled when parallel is used. -MAM 2006/06/17
         - Remove the flexible parallel code and the --enable-fphdf5
           configure option, it was never up to production standards
@@ -187,7 +187,7 @@ New Features
 	  JML 2005/01 - 2005/03
         - Hardware conversion between long double and integers is also added.
           SLU 2005/02/10
-        - Started to support software conversion between long double and 
+        - Started to support software conversion between long double and
           integers.  Hardware conversion will come very soon.  SLU - 2005/1/6
 	- Intel v8.0 compiler would infinite loop when compiling some test
 	  code with -O3 option.  Changed enable-production default compiler
@@ -214,8 +214,8 @@ New Features
             be used as the "location ID".  If a file ID is used, the attribute
             operation will occur on the root group of the file.
             - QAK - 2007/02/09
-       - Enabled the CORE driver to read an existing file depending on 
-            the setting of the backing_store for H5Pset_fapl_core and file 
+       - Enabled the CORE driver to read an existing file depending on
+            the setting of the backing_store for H5Pset_fapl_core and file
             open flags. - SLU - 2006/11/30
        - Added new H5Gget_info_by_idx() routine to query the information about
             a group according to the order within an index.
@@ -309,10 +309,10 @@ New Features
             application by building one MPI derived datatype accross all
             chunks.
          2) Implemented the decision-making support to do collective IO inside
-            MPI-IO per chunk. 
+            MPI-IO per chunk.
          3) Added the decision-making support to do one IO accross all chunks
             or to do multiple IOs with each IO per chunk.
-         4) Added the support to handle the case some processes won't do any IOs in 
+         4) Added the support to handle the case some processes won't do any IOs in
             collectively.
          5) Some MPI-IO package(mpich 1.2.6 or lower, e.g.) cannot handle
             collective IO correctly for the case when some processes have no
@@ -320,8 +320,8 @@ New Features
             collective IO mode to independent IO mode inside HDF5 library.
 
             Currently we find that MPICH at Linux and vender MPI-IO package at NCSA
-            Altix cannot handle this case. 
-            
+            Altix cannot handle this case.
+
              "hdf5_mpi_special_collective_io_works=${hdf5_mpi_special_collective_io_works='no'}"
               has been added at the end of file <ia64-linux-gnui> and
                                                  <linux-gnulibc1>.
@@ -329,8 +329,8 @@ New Features
              If MPI-IO packages at your Linux and Altix support this case,
              please comment out the last line and report to us at
              help@hdfgroup.org. We can tune in our configuration to
-             support this.                                                     
- 
+             support this.
+
              KY - 2006/02/16
        - Added character encoding to attribute creation property lists.
             JML - 2006/01/02
@@ -352,7 +352,7 @@ New Features
          more than once for the same dataset.
          Currently, not all MPI-IO packages support complicated MPI derived
                      datatype used in the implementation of irregular
-                     selection INSIDE HDF5. 
+                     selection INSIDE HDF5.
                      1) DEC 5.x is not supporting complicated derived datatype.
                      2) For AIX 5.1,
                      if your poe version number is 3.2.0.19 or lower,
@@ -362,39 +362,39 @@ New Features
                      and UNCOMMENT this line before the configure.
                      check poe version with the following command:
                      lpp -l all | grep ppe.poe
-                     3) For Linux cluster, 
+                     3) For Linux cluster,
                         if mpich version is 1.2.5 or lower, collective irregular selection
                         IO is not supported, internally independent IO is used.
                      4) For IRIX 6.5,
                         if C compiler version is 7.3 or lower, collective irregular selection
                         IO is not supported, internally independent IO is used.
                      5) For platforms which internally used mpich, if the
-                        mpich version is 1.2.5 or lower, please find the 
+                        mpich version is 1.2.5 or lower, please find the
                         corresponding config file and add
                         hdf5_mpi_complex_derived_datatype_works='no' at the
                         end of the configuration file. For example, at NCSA
-                        SGI Altix, the internal mpich library is 1.2.5. So 
+                        SGI Altix, the internal mpich library is 1.2.5. So
                         hdf5_mpi_complex_derived_datatype_works='no' should be
                         added at the end of the config file ia64-linux-gnu.
                      KY - 2005/09/12
         We also found not all MPI-IO packages support collective IO with one
                     or more processes to have no contributions to IO.
-                     For mpich version 1.2.6 or lower and all IRIX machine, 
+                     For mpich version 1.2.6 or lower and all IRIX machine,
                      if the library  checks that there are no IO contributions for some
                      processes, collective IO request is replaced with
                      independent inside HDF5.
                      KY - 2006/05/04
-                    
-        - HDF5 N-bit filter 
-          HDF5 support N-bit filter from this version,  
+
+        - HDF5 N-bit filter
+          HDF5 support N-bit filter from this version,
           The N-Bit filter is used effectively for compressing data of N-Bit
-          datatype as well as compound and array datatype with N-Bit fields. 
+          datatype as well as compound and array datatype with N-Bit fields.
           KY - 2005/04/15
         - HDF5 scaleoffset filter
           HDF5 supports scaleoffset filter for users to do data
-          compression through HDF5 library. 
+          compression through HDF5 library.
           Scale-Offset compression performs a scale and/or offset operation
-          on each data value and truncates the resulting value to a minimum 
+          on each data value and truncates the resulting value to a minimum
           number of bits and then stores the data.
           Scaleoffset filter supports floating-point and integer datatype.
           Please check the HDF5 reference manual for this.
@@ -410,9 +410,9 @@ New Features
 	- Added function H5Pget_data_transform, together with the previously
 	    added H5Pset_data_transform, to support the data transform
 	    feature. AKC - 2004/10/26
-        - Compound datatype has been enhanced with a new feature of size 
+        - Compound datatype has been enhanced with a new feature of size
             adjustment.  The size can be increased and decreased(without
-            cutting the last member) as long as it doesn't go down to zero.  
+            cutting the last member) as long as it doesn't go down to zero.
             No API change is involved.  SLU - 2004/10/1
         - Put back 6 old error API functions to be backward compatible with
             version 1.6.  They are H5Epush, H5Eprint, H5Ewalk, H5Eclear,
@@ -421,14 +421,14 @@ New Features
             H5Eclear_stack, H5Eset_auto_stack, H5Eget_auto_stack.  SLU -
             2004/9/2
         - 4 new API functions, H5Tencode, H5Tdecode, H5Sencode, H5Sdecode were
-            added to the library.  Given object ID, these functions encode and 
-            decode HDF5 objects(data type and space) information into and from 
+            added to the library.  Given object ID, these functions encode and
+            decode HDF5 objects(data type and space) information into and from
             binary buffer.        SLU - 2004/07/21
-        - Modified the way how HDF5 calculates 'pixels_per_scanline' parameter for 
+        - Modified the way how HDF5 calculates 'pixels_per_scanline' parameter for
             SZIP compression. Now there is no restriction on the size and shape of the
-            chunk except that the total number of elements in the chunk cannot be 
-            bigger than 'pixels_per_block' parameter provided by the user.  
-                                                                     EIP - 2004/07/21  
+            chunk except that the total number of elements in the chunk cannot be
+            bigger than 'pixels_per_block' parameter provided by the user.
+                                                                     EIP - 2004/07/21
         - Added support for SZIP without encoder.  Added H5Zget_filter_info
             and changed H5Pget_filter and H5Pget_filter_by_id to support this
             change.  JL/NF - 2004/06/30
@@ -443,19 +443,19 @@ New Features
         - A new API function H5Fget_filesize was added.  It returns the
             actual file size of the opened file.  SLU - 2004/06/24
 	- New Feature of Data transformation is added.  AKC - 2004/05/03.
-        - New exception handler for datatype conversion is put in to 
+        - New exception handler for datatype conversion is put in to
             replace the old overflow callback function.  This exception
             handler is set through H5Pset_type_conv_cb function.
             SLU - 2004/4/27
         - Added option that if $HDF5_DISABLE_VERSION_CHECK is set to 2,
 	    will suppress all library version mismatch warning messages.
 	    AKC - 2004/4/14
-	- A new type of dataspace, null dataspace(dataspace without any 
+	- A new type of dataspace, null dataspace(dataspace without any
             element) was added.  SLU - 2004/3/24
         - Data type conversion(software) from integer to float was added.
-            SLU - 2004/3/13 
+            SLU - 2004/3/13
         - Data type conversion(software) from float to integer was added.
-            Conversion from integer to float will be added later.  
+            Conversion from integer to float will be added later.
             SLU -2004/2/4
         - Added new H5Premove_filter routine to remove I/O pipeline filters
             from dataset creation property lists.  PVN - 2004/01/26
@@ -469,7 +469,7 @@ New Features
             object's object header.  QAK 2003/10/06
         - Added new H5Fget_freespace() routine to query the free space in a
             given file.  QAK 2003/10/06
-        - Added backward compatability with v1.6 for new Error API. SLU - 
+        - Added backward compatability with v1.6 for new Error API. SLU -
             2003/09/24
         - Changed 'objno' field in H5G_stat_t structure from 'unsigned long[2]'
             to 'haddr_t'.  QAK - 2003/08/08
@@ -503,18 +503,18 @@ New Features
     ----------------
          - added support for shared Fortran libraries.  -JML 2005/09/20
          - added missing h5tget_member_class_f function
-                                                 EIP 2005/04/06         
-         - added new functions h5fget_name_f and h5fget_filesize_f 
+                                                 EIP 2005/04/06
+         - added new functions h5fget_name_f and h5fget_filesize_f
                                                  EIP 2004/07/08
          - h5dwrite/read_f and h5awrite/read_f functions only accept dims parameter
             of the type INTEGER(HSIZE_T).
          - added support for native integers of 8 bytes (i.e. when special
            compiler flag is specified to set native fortran integers to 8 bytes,
-           for example, -i8 flag for PGI and Absoft Fortran compilers, 
+           for example, -i8 flag for PGI and Absoft Fortran compilers,
            -qintsize=8 flag for IBM xlf compiler).
                                                  EIP 2005/06/20
          - added support for "big" REAL and DOUBLE PRECISION types
-           (usually the size is specified by compilers flags like 
+           (usually the size is specified by compilers flags like
             -r8, -r16, etc.)
            Known problem: multi file test fails when REAL is 16 bytes.
                                                 EIP 2005/09/8
@@ -540,9 +540,9 @@ New Features
     ------
         - h5repack and h5diff changed command line parameter syntax to be
            similar to h5dump, adding also long switch names. PVN - 2008/1/16
-        - h5repack now supports adding multiple filters to all objects. 
+        - h5repack now supports adding multiple filters to all objects.
 	     PVN - 2008/1/16
-        - h5dump lists groups and attributes in requested orders (by name and 
+        - h5dump lists groups and attributes in requested orders (by name and
            creation order, both ascending and descending). PVN - 2007/10/5
         - h5import imports string (text) data. PVN - 2007/10/5
         - h52gif and gif2h5: Both these tools were revised to include the High
@@ -605,21 +605,21 @@ New Features
         - There are two new functions in the Lite library, H5LTtext_to_dtype
             and H5LTdtype_to_text.  H5LTtext_to_dtype creates a HDF5 data type
             given a text description; H5LTdtype_to_text converts a data type
-            to text description.  Only DDL definition is supported as text 
+            to text description.  Only DDL definition is supported as text
             desciption now. SLU - 2006/05/17
         - Added Packet Table API for creating tables with less overhead than
             H5TB API.  Added C++ wrapper for Packet Tables.  See documentation.
             JML - 2004/03/28
-    
-    Documentation 
-    ------------- 
-        - The documentation for this release is largely complete, but 
-            trails the source code.  A few of the newer functions are 
+
+    Documentation
+    -------------
+        - The documentation for this release is largely complete, but
+            trails the source code.  A few of the newer functions are
             not yet documented.                       FMB - 2007/04/18
         - The user documents for this release can be accessed directly at
             this location:
                http://www.hdfgroup.uiuc.edu/HDF5/doc_1.8pre/doc/
-            The most recent document versions (updated daily) in the 
+            The most recent document versions (updated daily) in the
             1.8 development branch can be accessed at this location:
                http://www.hdfgroup.uiuc.edu/HDF5/doc_dev_snapshot/H5_dev/
                                                       FMB - 2007/04/18
@@ -633,7 +633,7 @@ Support for new platforms, languages and compilers.
         - Added support for sequential and parallel libraries for Intel 64 Linux
           cluster (abe.ncsa.uiuc.edu).  Among three MPICH packages available on
           this machine, only Open MPI works.  The VMI has seg fault in hyperslab.c
-          and bittests.c tests.  The MVAPICH2 complained about mpd not running 
+          and bittests.c tests.  The MVAPICH2 complained about mpd not running
           the parallel test.  (see Known Problems section for more info)
                                                      EIP - 2007/06/25
         - Added support for HPUX11.23 for both 32 and 64-bit; HDF5 C++
@@ -762,12 +762,12 @@ Bug Fixes since HDF5-1.6.0 release
             particular file ID being closed, instead of operating on all open
             file IDs for a given file.  QAK - 2005/06/01
         - For family driver, the library didn't save member size in file.
-          When file is reopened, the size of 1st member file determine the 
-          member size.  Now member size is saved in file and is used to 
+          When file is reopened, the size of 1st member file determine the
+          member size.  Now member size is saved in file and is used to
           define member file size.  Wrong file access property of member size
-          will result in a failure.  Using any other driver except family 
-          will cause library to return error.  So is multi driver. SLU - 
-          2005/05/24  
+          will result in a failure.  Using any other driver except family
+          will cause library to return error.  So is multi driver. SLU -
+          2005/05/24
         - Fixed error in opening object in group that was opened in mounted
           file which has been unmounted.  QAK - 2005/03/17
         - Fixed a racing condition in MPIPOSIX virtual file drive close
@@ -776,8 +776,8 @@ Bug Fixes since HDF5-1.6.0 release
 	  accessing the file for another purpose (e.g., open with truncate)
 	  while other "slower" processes have not closed the same file with
 	  the previous purpose.  AKC - 2005/03/01
-        - H5Tget_member_value calls for enum datatype didn't return correct 
-            value if H5Tenum_valueof was called first.  It's fixed.  SLU - 
+        - H5Tget_member_value calls for enum datatype didn't return correct
+            value if H5Tenum_valueof was called first.  It's fixed.  SLU -
             2005/02/08
         - For variable-length string, H5Tget_class returned H5T_STRING as its
             class.  But H5Tdetect_class and H5Tget_member_class considered it
@@ -785,12 +785,12 @@ Bug Fixes since HDF5-1.6.0 release
             as H5T_STRING.  SLU - 2005/02/08
         - The byte order of 1-byte integer types was fixed as little endian
             even on a big-endian machine.  This has been corrected.  SLU -
-            2005/02/07 
+            2005/02/07
         - Fix segmentation fault when calling H5Fflush with an attribute that
             hasn't had a value written to it open.  QAK - 2004/10/18
-        - Back up supporting bitfield and time types in H5Tget_native_type.  
-            Leave it to future support.  The function simply returns error 
-            message of "not support" for bitfield and time types.  
+        - Back up supporting bitfield and time types in H5Tget_native_type.
+            Leave it to future support.  The function simply returns error
+            message of "not support" for bitfield and time types.
             SLU - 2004/10/5
         - Fixed address check in Core VFL driver to avoid spurious address/size
             overflows for odd valued addresses and/or sizes.  QAK - 2004/09/27
@@ -799,10 +799,10 @@ Bug Fixes since HDF5-1.6.0 release
 	    processes used point selections, and others didn't.  JRM - 2004/9/15
         - Corrected error where dataset region references were written in an
             incorrect way on Cray machines.  PVN & QAK - 2004/09/13
-        - The H5Tget_native_type now determines the native type for integers 
-	    based on the precision. This is to avoid cases of wrongly converting 
-            an int to a short in machines that have a short of 8 bytes but with 
-	    32bit precision (e.g Cray SV1). PVN - 2004/09/07  
+        - The H5Tget_native_type now determines the native type for integers
+	    based on the precision. This is to avoid cases of wrongly converting
+            an int to a short in machines that have a short of 8 bytes but with
+	    32bit precision (e.g Cray SV1). PVN - 2004/09/07
         - Changed H5Dread() to not overwrite data in an application's buffer
             with garbage when accessing a chunked dataset with an undefined
             fill value and an unwritten chunk is uncountered.  QAK - 2004/08/25
@@ -844,10 +844,10 @@ Bug Fixes since HDF5-1.6.0 release
             variable-length string as field.  SLU - 2004/06/10
         - Fixed potential file corruption bug when a block of metadata could
             overlap the end of the internal metadata accumulator buffer and
-            the buffer would be extended correctly, but would incorrectly 
+            the buffer would be extended correctly, but would incorrectly
             change it's starting address.  QAK - 2004/06/09
         - Opaque datatype with no tag failed for some operations.  Fixed.
-            SLU - 2004/6/3 
+            SLU - 2004/6/3
         - Fixed potential file corruption bug where dimensions that were
             too large (a value greater than could be represented in 32-bits)
             could cause the incorrect amount of space to be allocated in a
@@ -903,7 +903,7 @@ Bug Fixes since HDF5-1.6.0 release
             but were interspersed with dimensions that could not be flattened
             were not correctly handled, causing core dumps.  QAK - 2003/10/25
         - Fixed incorrect datatype of the third parameter to the Fortran90
-            h5pset(get)_cache_f subroutine (INTEGER to INTEGER(SIZE_T)) 
+            h5pset(get)_cache_f subroutine (INTEGER to INTEGER(SIZE_T))
             EIP - 2003/10/13
         - Fixed problems with accessing variable-length data datatypes on
             Crays.  QAK - 2003/10/10
@@ -994,10 +994,10 @@ Bug Fixes since HDF5-1.6.0 release
            selections. PVN 2008/01/16
         - Fixed h5diff regarding the display of NaN (Not a Number)
            values. PVN 2008/01/16
-	- Fixed h5dump regarding the parsing of binary output parameters. 
+	- Fixed h5dump regarding the parsing of binary output parameters.
            PVN 2008/01/16
 	- Fixed memory problems in h52gif and gif2h5. PVN 2008/01/16
-	- Fixed h5repack dealing with NULL references. PVN 2008/01/16 
+	- Fixed h5repack dealing with NULL references. PVN 2008/01/16
         - Fixed h5dump & h5ls to display attributes in "name" order, rather
            than the order they are encountered in the object header.
            QAK - 2007/10/04
@@ -1005,7 +1005,7 @@ Bug Fixes since HDF5-1.6.0 release
            attributes. PVN 2007/03/13
         - Fixed h5dump regarding the display of group comments. PVN
            2007/03/13
-        - Fixed h5dump regarding the display of hardlinks pointing 
+        - Fixed h5dump regarding the display of hardlinks pointing
            to the root group. PVN 2007/03/13
         - Fixed h5diff percentage option -p. PVN 2007/03/05
         - Fixed h5dump that caused array indices greater than 2 ^32-1
@@ -1023,14 +1023,14 @@ Bug Fixes since HDF5-1.6.0 release
             H5Tget_native_type() internally.  QAK - 2003/08/25
 
 
-    Documentation 
-    ------------- 
+    Documentation
+    -------------
 
 
     F90 APIs
     --------
         - h5pget_driver_f was returning information that could not be
-          interpreted by fortran application program; fixed. EIP - 2005/04/10 
+          interpreted by fortran application program; fixed. EIP - 2005/04/10
 
 
 Platforms Tested
@@ -1041,7 +1041,7 @@ Platforms marked with * were not tested for hdf5-1.8.0-rc* release
 
 *   AIX 5.2 (32/64 bit)           xlc 8.0.0.11
                                   xlC 8.0
-                                  xlf 10.01.0000.0 
+                                  xlf 10.01.0000.0
                                   mpcc_r 6.0.0.8
                                   mpxlf_r 8.1.1.7
 *    AIX 5.3 (32/64 bit)           xlc 7.0.0.8
@@ -1065,9 +1065,9 @@ Platforms marked with * were not tested for hdf5-1.8.0-rc* release
                                   HP F90 v2.9.2
                                   HP aC++/ANSI C B3910B A.06.00
     IRIX64 6.5 (64 & n32)         MIPSpro cc 7.4.4m
-                                  F90 MIPSpro 7.4.4m 
+                                  F90 MIPSpro 7.4.4m
                                   C++ MIPSpro cc 7.4.4m
-				 
+
 *   Linux 2.6.9 (RHEL4)           Intel 10.0 compilers
     (abe.ncsa.uiuc.edu)
     Linux 2.4.21-47               gcc 3.2.3 20030502
@@ -1078,9 +1078,9 @@ Platforms marked with * were not tested for hdf5-1.8.0-rc* release
     Linux 2.6.16.27 x86_64 AMD    gcc 4.1.0 (SuSE Linux), g++ 4.1.0, g95 (GCC 4.0.3)
     (smirom)                      PGI 6.2-5 (pgcc, pgf90, pgCC)
                          	  Intel 9.1 (icc, iort, icpc)
-    Linux 2.6.5-7.252.1-rtgfx #1 
+    Linux 2.6.5-7.252.1-rtgfx #1
           SMP ia64                Intel(R) C++ Version 9.0
-    (cobalt)                      Intel(R) Fortran Itanium(R) Version 9.0 
+    (cobalt)                      Intel(R) Fortran Itanium(R) Version 9.0
                                   SGI MPI
     SunOS 5.8 32,46               Sun WorkShop 6 update 2 C 5.3
      (Solaris 2.8)                Sun WorkShop 6 update 2 Fortran 95 6.2
@@ -1088,9 +1088,9 @@ Platforms marked with * were not tested for hdf5-1.8.0-rc* release
 *   SunOS 5.10 i86pc              Sun C 5.7
                                   Sun Fortran 95 8.1
                                   Sun C++ 5.7
-    SunOS 5.10                    cc: Sun C 5.8 
-    (linew)                       f90: Sun Fortran 95 8.2 
-                                  CC: Sun C++ 5.8 
+    SunOS 5.10                    cc: Sun C 5.8
+    (linew)                       f90: Sun Fortran 95 8.2
+                                  CC: Sun C++ 5.8
     Xeon Linux 2.4.21-32.0.1.ELsmp-perfctr-lustre
     (tungsten)	                  gcc 3.2.2 20030222
                                   Intel(R) C++ Version 9.0
@@ -1100,17 +1100,17 @@ Platforms marked with * were not tested for hdf5-1.8.0-rc* release
                                   Intel(R) C++ Version 8.1
                                   Intel(R) Fortran Compiler Version 8.1
 				  mpich-gm-1.2.5..10-intel-r2
-    Windows XP                    
+    Windows XP
 				  Visual Studio .NET
                                   Visual Studio 2005 w/ Intel Fortran 9.1
                                   Cygwin(native gcc compiler and g95)
 				  MinGW(native gcc compiler and g95)
-    Windows XP x64                
+    Windows XP x64
 			          Visual Studio 2005 w/ Intel Fortran 9.1
-    Windows Vista			
+    Windows Vista
 			          Visual Studio 2005
 
-    MAC OS  10.4 (Intel)          gcc i686-apple-darwin8-gcc-4.0.1 (GCC) 4.0.1 
+    MAC OS  10.4 (Intel)          gcc i686-apple-darwin8-gcc-4.0.1 (GCC) 4.0.1
                                   G95 (GCC 4.0.3 (g95 0.91!) Nov 21 2006)
 *    Alpha Open VMS 7.3
 
@@ -1125,7 +1125,7 @@ Supported Configuration Features Summary
           x   = not working in this release
           dna = does not apply
           ( ) = footnote appears below second table
-          <blank> = testing incomplete on this feature or platform 
+          <blank> = testing incomplete on this feature or platform
 
 Platform                 C        F90    F90      C++   zlib  SZIP
                          parallel        parallel
@@ -1149,57 +1149,57 @@ RedHat EL3  W PGI   (3)  n        y      n        y     y     n
 SuSe x86_64 gcc  (3,12)  y(1a)    y(11)  n        y     y     y
 SuSe x86_64 Int  (3,12)  n        y(13)  n        y     y     n
 SuSe x86_64 PGI  (3,12)  n        y(8)   n        y     y     y
-Linux 2.4 Xeon C 
+Linux 2.4 Xeon C
     Lustre Intel  (3,6)  n        y      n        y     y     n
-Linux 2.6 SuSE ia64 C 
+Linux 2.6 SuSE ia64 C
     Intel         (3,7)  y        y      y        y     y     n
-Linux 2.6 SGI Altix 
+Linux 2.6 SGI Altix
     ia64 Intel      (3)  y        y      y        y     y     y
 Alpha OpenVMS 7.3.2      n        y      n        y     n     n
 
 
 
-Platform                 Shared  Shared    Shared    static-  Thread-  
-                         C libs  F90 libs  C++ libs  exec     safe     
-Solaris2.8 64-bit        y       y         y         x        y        
-Solaris2.8 32-bit        y       y         y         x        y        
-Solaris2.10 64-bit       y                           x        y        
-Solaris2.10 32-bit       y                           x        y        
-IRIX64_6.5 64-bit        y       y         n         y        y        
-IRIX64_6.5 32-bit        y       dna       y         y        y        
-HPUX11.00                y       n         y         x        n        
-HPUX11.23-32bit          y       n         n         y        n        
-HPUX11.23-64bit          y       dna       n         y        n        
-Cray XT3           (16)  n       n         n         n        n        
-AIX-5.2 & 5.3 32-bit     n       n         n         y        n        
-AIX-5.2 & 5.3 64-bit     n       n         n         y        n        
-Windows XP               y       y(15)     y         y        y        
-Windows XP x64           y       y(15)     y         y        y        
-Windows Vista            y       n         n         y        y        
-Mac OS X 10.3            y                           y        n        
+Platform                 Shared  Shared    Shared    static-  Thread-
+                         C libs  F90 libs  C++ libs  exec     safe
+Solaris2.8 64-bit        y       y         y         x        y
+Solaris2.8 32-bit        y       y         y         x        y
+Solaris2.10 64-bit       y                           x        y
+Solaris2.10 32-bit       y                           x        y
+IRIX64_6.5 64-bit        y       y         n         y        y
+IRIX64_6.5 32-bit        y       dna       y         y        y
+HPUX11.00                y       n         y         x        n
+HPUX11.23-32bit          y       n         n         y        n
+HPUX11.23-64bit          y       dna       n         y        n
+Cray XT3           (16)  n       n         n         n        n
+AIX-5.2 & 5.3 32-bit     n       n         n         y        n
+AIX-5.2 & 5.3 64-bit     n       n         n         y        n
+Windows XP               y       y(15)     y         y        y
+Windows XP x64           y       y(15)     y         y        y
+Windows Vista            y       n         n         y        y
+Mac OS X 10.3            y                           y        n
 Mac OS X 10.4 PowerPC
-FreeBSD 4.11             y       n         y         y        y        
-RedHat EL3  W       (3)  y       y(10)     y         y        y        
-RedHat EL3  W Intel (3)  y       y         y         y        n        
-RedHat EL3  W PGI   (3)  y       y         y         y        n        
-SuSe x86_64 W GNU (3,12) y       y         y         y        y        
-SuSe x86_64 W Int (3,12) y       y         y         y(14)    n        
-SuSe x86_64 W PGI (3,12) y       y         y         y(14)    n        
-Linux 2.4 Xeon C 
-    Lustre Intel    (6)  y       y         y         y        n        
-Linux 2.4 SuSE 
-    ia64 C Intel    (7)  y       y         y         y        n        
-Linux 2.4 SGI Altix 
-    ia64 Intel           y                           y        n        
-Alpha OpenVMS 7.3.2      n       n         n         y        n        
+FreeBSD 4.11             y       n         y         y        y
+RedHat EL3  W       (3)  y       y(10)     y         y        y
+RedHat EL3  W Intel (3)  y       y         y         y        n
+RedHat EL3  W PGI   (3)  y       y         y         y        n
+SuSe x86_64 W GNU (3,12) y       y         y         y        y
+SuSe x86_64 W Int (3,12) y       y         y         y(14)    n
+SuSe x86_64 W PGI (3,12) y       y         y         y(14)    n
+Linux 2.4 Xeon C
+    Lustre Intel    (6)  y       y         y         y        n
+Linux 2.4 SuSE
+    ia64 C Intel    (7)  y       y         y         y        n
+Linux 2.4 SGI Altix
+    ia64 Intel           y                           y        n
+Alpha OpenVMS 7.3.2      n       n         n         y        n
 
     Notes: (1)  Using mpich 1.2.6.
            (1a) Using mpich2 1.0.6.
            (2)  Using mpt and mpich 1.2.6.
-           (3)  Linux 2.6 with GNU, Intel, and PGI compilers, as indicated.  
+           (3)  Linux 2.6 with GNU, Intel, and PGI compilers, as indicated.
                   W or C indicates workstation or cluster, respectively.
 
-           (6)  Linux 2.4.21-32.0.1.  Xeon cluster with ELsmp_perfctr_lustre 
+           (6)  Linux 2.4.21-32.0.1.  Xeon cluster with ELsmp_perfctr_lustre
                   and Intel compilers
            (7)  Linux 2.4.21, SuSE_292.till.  Ia64 cluster with Intel compilers
            (8)  pgf90
@@ -1218,14 +1218,14 @@ Alpha OpenVMS 7.3.2      n       n         n         y        n
 
 Known Problems
 ==============
-* We discovered two problems when running collective IO parallel HDF5 tests 
-  with chunking storage on  ChaMPIon MPI compiler on tungsten, a linux 
+* We discovered two problems when running collective IO parallel HDF5 tests
+  with chunking storage on  ChaMPIon MPI compiler on tungsten, a linux
   cluster at NCSA.
-  Under some complex selection cases, 
+  Under some complex selection cases,
   1) MPI_Get_element returns the wrong value.
   2) MPI_Type_struct also generates wrong derived data type and corrupt data
      may be generated.
-  This only happens when turning on collective IO with chunking storage 
+  This only happens when turning on collective IO with chunking storage
   with some complex selections. We haven't found these problems on other
   MPI-IO compilers. If you encounter these problems, you may use Independent IO
   instead.
@@ -1241,22 +1241,22 @@ Known Problems
 * For SNL, spirit/liberty/thunderbird: The serial tests pass but parallel
   tests failed with MPI-IO file locking message. AKC - 2007/6/25.
 * On Intel 64 Linux cluster (RH 4, Linux 2.6.9) with Intel 10.0 compilers use
-  -mp -O1 compilation flags to build the libraries. Higher level of optimization 
-  causes failures in several HDF5 library tests. 
+  -mp -O1 compilation flags to build the libraries. Higher level of optimization
+  causes failures in several HDF5 library tests.
 * For HPUX 11.23 many tools tests failed for 64-bit version when linked to the
   shared libraries (tested for 1.8.0-beta2)
 * For SNL, Red Storm: only paralle HDF5 is supported.  The serial tests pass
   and the parallel tests also pass with lots of non-fatal error messages.
 * For LLNL, uP: both serial and parallel pass.  Zeus: serial passes but
   parallel fails with a known proglem in MPI.  ubgl: serial passes but
-  parallel fails. 
-* on SUN 5.10 C++ test fails in the "Testing Shared Datatypes with Attributes" test 
+  parallel fails.
+* on SUN 5.10 C++ test fails in the "Testing Shared Datatypes with Attributes" test
 * configuring with --enable-debug=all produces compiler errors on most
   platforms.  Users who want to run HDF5 in debug mode should use
   --enable-debug rather than --enable-debug=all to enable debugging
   information on most modules.
 * On Mac OS 10.4, test/dt_arith.c has some errors in conversion from long
-  double to (unsigned) long long and from (unsigned)long long to long double. 
+  double to (unsigned) long long and from (unsigned)long long to long double.
 * On Altix SGI with Intel 9.0 testmeta.c would not compile with -O3
   optimization flag.
 * On VAX, Scaleoffset filter isn't supported. The filter cannot be applied to
@@ -1270,23 +1270,23 @@ Known Problems
   that when using 4 processors, a simple collective write will be hung
   sometimes. This can be verified with t_mpi test under testpar.
 * On IRIX6.5, when C compiler version >7.4, the complicate MPI derived data type
-  code will work. However, the user should be aware to enlarge MPI_TYPE_MAX environment 
+  code will work. However, the user should be aware to enlarge MPI_TYPE_MAX environment
   variable to some certian value in order to use collective irregular selection code.
-  For example, the current parallel HDF5 test needs to enlarge MPI_TYPE_MAX to 
+  For example, the current parallel HDF5 test needs to enlarge MPI_TYPE_MAX to
   200,000 to make the test pass.
-* The dataset created or rewritten with the v1.6.3 library or after can't 
-  be read with the v1.6.2 library or before when Fletcher32 EDC(filter) is 
-  enabled.  There was a bug in the calculating code of the Fletcher32 
-  checksum in the library before v1.6.3.  The checksum value wasn't consistent 
-  between big-endian and little-endian systems.  This bug was fixed in 
-  Release 1.6.3.  However, after fixing the bug, the checksum value is no 
-  longer the same as before on little-endian system.  The library release 
+* The dataset created or rewritten with the v1.6.3 library or after can't
+  be read with the v1.6.2 library or before when Fletcher32 EDC(filter) is
+  enabled.  There was a bug in the calculating code of the Fletcher32
+  checksum in the library before v1.6.3.  The checksum value wasn't consistent
+  between big-endian and little-endian systems.  This bug was fixed in
+  Release 1.6.3.  However, after fixing the bug, the checksum value is no
+  longer the same as before on little-endian system.  The library release
   after 1.6.4 can still read the dataset created or rewritten with the library
   of v1.6.2 or before.  SLU - 2005/6/30
 * For the version 6(6.02 and 6.04) of Portland Group compiler on AMD Opteron
   processor, there's a bug in the compiler for optimization(-O2).  The library
-  failed in several tests but all related to multi driver.  The problem has 
-  been reported to the vendor.  
+  failed in several tests but all related to multi driver.  The problem has
+  been reported to the vendor.
 * On IBM AIX systems, parallel HDF5 mode will fail some tests with error
   messages like "INFO: 0031-XXX ...".  This is from the command poe.
   Set the environment variable MP_INFOLEVEL to 0 to minimize the messages
@@ -1300,7 +1300,7 @@ Known Problems
   to provide a mean to run poe without the debug socket.
 
 * The C++ library's tests fails when compiling with PGI C++ compiler.  The
-  workaround until the problem is correctly handled is to use the 
+  workaround until the problem is correctly handled is to use the
   flag "--instantiate=local" prior to the configure and build steps, as:
         setenv CXX "pgCC --instantiate=local"  for pgCC 5.02 and higher
 
@@ -1318,7 +1318,7 @@ Known Problems
   The --enable-static-exec configure flag also fails to correctly compile
   on IBM SP2 platform for the serial mode. The parallel mode works fine
   with this option.
-  
+
   It is suggested that you don't use this option on these platforms
   during configuration.
 
@@ -1327,7 +1327,7 @@ Known Problems
   able to handle the `long long' datatype with the warning:
 
         warning: ANSI C does not support `long long'
-  
+
   This warning is innocuous and can be safely ignored.
 
 
@@ -1347,7 +1347,7 @@ Known Problems
       the different precision in the values displayed and h5ls appears to
       be dumping floating-point numbers correctly.
 
-* Before building HDF5 F90 Library from source on Crays 
+* Before building HDF5 F90 Library from source on Crays
   replace H5Aff.f90, H5Dff.f90 and H5Pff.f90 files in the fortran/src
   subdirectory in the top level directory with the Cray-specific files
   from this site:
@@ -1362,7 +1362,7 @@ Known Problems
 
 * On some platforms that use Intel and Absoft compilers to build HDF5 fortran library,
   compilation may fail for fortranlib_test.f90, fflush1.f90 and fflush2.f90
-  complaining about exit subroutine. Comment out the line 
+  complaining about exit subroutine. Comment out the line
   IF (total_error .ne. 0) CALL exit (total_error)
 
 * On IA32 and IA64 systems, if you use a compiler other than GCC (such as
@@ -1386,28 +1386,28 @@ Known Problems
   INSTALL file sections 5.7 and 5.8
 
 * On at least one system, (SDSC DataStar), the scheduler (in this case
-  LoadLeveler) sends job status updates to standard error when you run 
+  LoadLeveler) sends job status updates to standard error when you run
   any executable that was compiled with the parallel compilers.
 
-  This causes problems when running "make check" on parallel builds, as 
+  This causes problems when running "make check" on parallel builds, as
   many of the tool tests function by saving the output from test runs,
-  and comparing it to an exemplar.  
+  and comparing it to an exemplar.
 
   The best solution is to reconfigure the target system so it no longer
   inserts the extra text.  However, this may not be practical.
 
-  In such cases, one solution is to "setenv HDF5_Make_Ignore yes" prior to 
-  the configure and build.  This will cause "make check" to continue after 
+  In such cases, one solution is to "setenv HDF5_Make_Ignore yes" prior to
+  the configure and build.  This will cause "make check" to continue after
   detecting errors in the tool tests.  However, in the case of SDSC DataStar,
   it also leaves you with some 150 "failed" tests to examine by hand.
 
   A second solution is to write a script to run serial tests and filter
   out the text added by the scheduler.  A sample script used on SDSC
-  DataStar is given below, but you will probably have to customize it 
-  for your installation.  
+  DataStar is given below, but you will probably have to customize it
+  for your installation.
 
-  Observe that the basic idea is to insert the script as the first item 
-  on the command line which executes the the test.  The script then 
+  Observe that the basic idea is to insert the script as the first item
+  on the command line which executes the the test.  The script then
   executes the test and filters out the offending text before passing
   it on.
 
@@ -1429,11 +1429,11 @@ Known Problems
 	exit $RETURN_VALUE
 
   You get the HDF make files and test scipts to execute your filter script
-  by setting the environment variable "RUNSERIAL" to the full path of the 
-  script prior to running configure for parallel builds.  Remember to 
+  by setting the environment variable "RUNSERIAL" to the full path of the
+  script prior to running configure for parallel builds.  Remember to
   "unsetenv RUNSERIAL" before running configure for a serial build.
 
-  Note that the RUNSERIAL environment variable exists so that we can 
+  Note that the RUNSERIAL environment variable exists so that we can
   can prefix serial runs as necessary on the target system.  On DataStar,
   no prefix is necessary.  However on an MPICH system, the prefix might
   have to be set to something like "/usr/local/mpi/bin/mpirun -np 1" to
@@ -1453,16 +1453,16 @@ HDF5 version 1.6.7 released on Thu Jan 31 21:09:10 CST 2008
 
 INTRODUCTION
 ============
-This document describes the differences between HDF5-1.6.6 and HDF5-1.6.7  
+This document describes the differences between HDF5-1.6.6 and HDF5-1.6.7
 It contains information on the platforms tested and known problems in
 HDF5-1.6.7. For more details, check the HISTORY.txt file in the HDF5 source.
 
 HDF5 documentation can be found in the distributed release source code
-in the subdirectory doc/html/ or on the THG (The HDF Group) FTP server: 
+in the subdirectory doc/html/ or on the THG (The HDF Group) FTP server:
 
      ftp://ftp.hdfgroup.org/HDF5/docs/
 
-Documentation for the current release in the HDF5 Release 1.6.x series is 
+Documentation for the current release in the HDF5 Release 1.6.x series is
 also on the HDF web site:
 
      http://hdfgroup.org/HDF5/doc1.6/
@@ -1492,7 +1492,7 @@ New Features
 ============
     Configuration:
     -------------------------
-    '--enable-stream-vfd' and '--disable-stream-vfd' are no longer valid 
+    '--enable-stream-vfd' and '--disable-stream-vfd' are no longer valid
     configure options because the stream I/O driver has ben removed from
     the distribution.
 
@@ -1502,12 +1502,12 @@ New Features
     --------
     The stream I/O driver is not included with the HDF5 Library in this
     release.  The source code files hdf5/src/H5FDstream.c and
-    hdf5/src/H5FDstream.h and the driver ENUM value H5FD_STREAM have been 
+    hdf5/src/H5FDstream.h and the driver ENUM value H5FD_STREAM have been
     removed.
 
     Parallel Library:
     -----------------
-    None      
+    None
 
     Tools:
     ------
@@ -1533,9 +1533,9 @@ Bug Fixes since HDF5-1.6.6 Release
 
     Library
     -------
-        - H5Iget_name could not be used with an object identifier returned  
-            by H5Rdereference; the function would not be able to determine 
-            a valid object name.  It has been fixed.  SLU - 2008/1/30 
+        - H5Iget_name could not be used with an object identifier returned
+            by H5Rdereference; the function would not be able to determine
+            a valid object name.  It has been fixed.  SLU - 2008/1/30
         - Changed library's behavior for reading files that might have
             corrupted object header information from a previous (buggy)
             version of the library.  By default, the library now rebuilds the
@@ -1557,15 +1557,15 @@ Bug Fixes since HDF5-1.6.6 Release
     Performance
     -------------
      None
-   
+
 
     Tools
     -----
      None
 
 
-    Documentation 
-    ------------- 
+    Documentation
+    -------------
      None
 
 
@@ -1573,7 +1573,7 @@ Bug Fixes since HDF5-1.6.6 Release
     -------
      None
 
-                                
+
     C++ API
     -------
      None
@@ -1581,13 +1581,13 @@ Bug Fixes since HDF5-1.6.6 Release
 
 Documentation
 =============
-    HDF5 documentation can be found in the distributed release source 
-    code in the subdirectory doc/html/ (start with index.html) or on the 
-    THG (The HDF Group) FTP server: 
+    HDF5 documentation can be found in the distributed release source
+    code in the subdirectory doc/html/ (start with index.html) or on the
+    THG (The HDF Group) FTP server:
 
          ftp://ftp.hdfgroup.org/HDF5/docs/
 
-    Online documentation for the current release in the HDF5 Release 1.6.x 
+    Online documentation for the current release in the HDF5 Release 1.6.x
     series can be found on the THG web site:
 
          http://hdfgroup.org/HDF5/doc1.6/
@@ -1596,9 +1596,9 @@ Documentation
     in the document "HDF5 Software Changes from Release to Release":
 
          http://hdfgroup.org/HDF5/doc1.6/ADGuide/Changes.html
- 
-    Since the stream I/O driver is not included in this release, the 
-    functions H5Pset_fapl_stream and H5Pget_fapl_stream and the stream 
+
+    Since the stream I/O driver is not included in this release, the
+    functions H5Pset_fapl_stream and H5Pget_fapl_stream and the stream
     ENUM value H5FD_STREAM have been removed from the documentation.
 
 
@@ -1622,20 +1622,20 @@ Platforms Tested
 
     Linux 2.6.9-42.0.10.ELsmp #1  gcc (GCC) 3.4.6
          SMP i686 i386             G95 (GCC 4.0.3 (g95 0.91!) April 18 2007)
-    (kagiso)                      PGI C, Fortran, C++ 7.0-7 32-bit 
-                                  Intel(R) C Compiler for 32-bit 
-                                      applications, Version 9.1 
-                                  Intel(R) C++ Compiler for 32-bit 
+    (kagiso)                      PGI C, Fortran, C++ 7.0-7 32-bit
+                                  Intel(R) C Compiler for 32-bit
+                                      applications, Version 9.1
+                                  Intel(R) C++ Compiler for 32-bit
+                                      applications, Version 9.1
+                                  Intel(R) Fortran Compiler for 32-bit
                                       applications, Version 9.1
-                                  Intel(R) Fortran Compiler for 32-bit 
-                                      applications, Version 9.1 
                                   Absoft 32-bit Fortran 95 10.0.4
-                                  MPICH mpich2-1.0.6p1 compiled with  
-                                  gcc 4.2.1 and G95 (GCC 4.0.3 (g95 0.91!) 
+                                  MPICH mpich2-1.0.6p1 compiled with
+                                  gcc 4.2.1 and G95 (GCC 4.0.3 (g95 0.91!)
 
     Linux 2.6.16.46-0.12-debug #1 Intel(R) C++ Version 10.0.025
         SMP ia64 GNU/Linux        Intel(R) Fortran Itanium(R) Version 10.0.025
-    (ucar hir1)                   
+    (ucar hir1)
 
     Linux 2.6.16.46-0.14-smp #1   Intel(R) C++ for Intel(R) EM64T Ver. 9.1.037
         SMP x86_64 GNU/Linux      Intel(R) Fortran Intel(R) EM64T Ver. 9.1.031
@@ -1654,7 +1654,7 @@ Platforms Tested
     SunOS 5.10 32- and 64-bit     Sun WorkShop 6 update 2 C 5.8
     (linew)                       Sun WorkShop 6 update 2 Fortran 95 8.2
                                   Sun WorkShop 6 update 2 C++ 5.8
-                                  Patch 121019-06 
+                                  Patch 121019-06
 
     Xeon Linux 2.4.21-32.0.1.ELsmp-perfctr-lustre
     (tungsten)                    Intel(R) C++ Version 9.0
@@ -1724,34 +1724,34 @@ SuSE Linux 2.4 ia64              C    y        y    y        y    y     y
 SuSe Linux 2.6.5 SGI Altix ia64       n        y    n        y    y     y
 
 
-Platform                              Shared        static-  Thread-  
-                                      libraries(4)  exec     safe     
-Solaris2.8 32- and 64-bit             y             n        y        
-Solaris2.10 32- and 64-bit            y             n        y        
-IRIX64_6.5 32-bit                     y             n        y        
-IRIX64_6.5 64-bit                     y             n        y        
-WinXP Visual Studio 6.0               y             n        n        
-WinXP CYGWIN                          y             n        n        
-WinXP 2005                            y             n        n        
-WinXP .Net                            y             n        n        
-WinVista 2005                         y             n        n        
-Mac OS X 10.4.10                      y             n        n        
-AIX-5.2 & 5.3 32- and 64-bit          n             n        n        
-FreeBSD 6.2 32- and 64-bit            y             n        n        
-RedHat Linux 2.4.21              W    y             n        n        
-SuSE Linux 2.6.9-42 i686 GNU (1) W    y             n        y        
-SuSE Linux 2.6.9-42 i686 Intel   W    y             n        n        
-SuSE Linux 2.6.9-42 i686 PGI     W    n             n        n        
-SuSE Linux 2.6.16 x86_64 GNU (1) W    y             n        y        
-SuSE Linux 2.6.16 x86_64 Intel   W    y             n        n        
-SuSE Linux 2.6.16 x86_64 PGI     W    n             n        n        
-RHEL 4 Linux 2.6.9 Xeon Lustre   C    y             n        n        
-RedHat Linux 2.4 Xeon Lustre     C    y             n        n        
-SuSE Linux 2.4 ia64              C    y             n        n        
-SuSe Linux 2.6.5 SGI Altix ia64       n             n        n        
-
-Compiler versions for each platform are listed in the "Platforms Tested" 
-table found elsewhere in this file (RELEASE.txt).  Unless otherwise noted, 
+Platform                              Shared        static-  Thread-
+                                      libraries(4)  exec     safe
+Solaris2.8 32- and 64-bit             y             n        y
+Solaris2.10 32- and 64-bit            y             n        y
+IRIX64_6.5 32-bit                     y             n        y
+IRIX64_6.5 64-bit                     y             n        y
+WinXP Visual Studio 6.0               y             n        n
+WinXP CYGWIN                          y             n        n
+WinXP 2005                            y             n        n
+WinXP .Net                            y             n        n
+WinVista 2005                         y             n        n
+Mac OS X 10.4.10                      y             n        n
+AIX-5.2 & 5.3 32- and 64-bit          n             n        n
+FreeBSD 6.2 32- and 64-bit            y             n        n
+RedHat Linux 2.4.21              W    y             n        n
+SuSE Linux 2.6.9-42 i686 GNU (1) W    y             n        y
+SuSE Linux 2.6.9-42 i686 Intel   W    y             n        n
+SuSE Linux 2.6.9-42 i686 PGI     W    n             n        n
+SuSE Linux 2.6.16 x86_64 GNU (1) W    y             n        y
+SuSE Linux 2.6.16 x86_64 Intel   W    y             n        n
+SuSE Linux 2.6.16 x86_64 PGI     W    n             n        n
+RHEL 4 Linux 2.6.9 Xeon Lustre   C    y             n        n
+RedHat Linux 2.4 Xeon Lustre     C    y             n        n
+SuSE Linux 2.4 ia64              C    y             n        n
+SuSe Linux 2.6.5 SGI Altix ia64       n             n        n
+
+Compiler versions for each platform are listed in the "Platforms Tested"
+table found elsewhere in this file (RELEASE.txt).  Unless otherwise noted,
 compilers used are the system compilers.
 
 Footnotes:
@@ -1763,13 +1763,13 @@ Known Problems
 * We discovered two problems when running collective IO parallel HDF5 tests
   with chunking storage with the ChaMPIon MPI compiler on tungsten, a Linux
   cluster at NCSA.
-  Under some complex selection cases, 
+  Under some complex selection cases,
   1) MPI_Get_element returns the wrong value.
-  2) MPI_Type_struct also generates the wrong derived datatype and corrupt 
+  2) MPI_Type_struct also generates the wrong derived datatype and corrupt
      data may be generated.
   This only happens when turning on collective IO with chunking storage
-  with some complex selections. We haven't found these problems on other 
-  MPI-IO compilers. If you encounter these problems, you may use Independent 
+  with some complex selections. We haven't found these problems on other
+  MPI-IO compilers. If you encounter these problems, you may use Independent
   IO instead.
 
   To avoid this problem, change the following line in your code:
@@ -1777,7 +1777,7 @@ Known Problems
 
   to
   H5Pset_dxpl_mpio(xfer_plist, H5FD_MPIO_INDEPENDENT);
- 
+
   KY - 2007/08/24
 
 * QSC (an HP alpha-based OSF1 cluster) does not create h5pfc correctly. It
@@ -1790,7 +1790,7 @@ Known Problems
   "523648:lt-h5repacktst: rld: Fatal Error: Cannot Successfully map soname
   'libh5test.so.1' under any of the filenames .......(bunch of directories)
   "
-  And the testing will fail. 
+  And the testing will fail.
 
   We believe this is a libtool problem. One way to get rid of this is to
   add the paths of libh5test.so.1 and libh5.so.1 to the shared library path.
@@ -1804,15 +1804,15 @@ Known Problems
   setenv LD_LIBRARY64_PATH ......(existing paths):[full path of HDF5
   directory/test/.libs]:[full path of HDF5 directory/src/.libs]
 
-  NOTE: This problem ONLY affects the testing of the HDF5 library when you 
-  build from source. It won't affect any applications that would like to link 
-  with the HDF5 shared library since the shared library path needs to be set 
+  NOTE: This problem ONLY affects the testing of the HDF5 library when you
+  build from source. It won't affect any applications that would like to link
+  with the HDF5 shared library since the shared library path needs to be set
   anyway.  KY - 2007/8/2
 
 * QSC (an HP alpha-based OSF1 cluster) failed the testpar/testphdf5 sub-test
-  "calloc".  All other tests passed.  This indicates that a dataset using 
-  chunked storage created by serial HDF5 may not work properly with parallel 
-  HDF5.  The calloc test can be skipped by running "prun ... testphdf5 -x 
+  "calloc".  All other tests passed.  This indicates that a dataset using
+  chunked storage created by serial HDF5 may not work properly with parallel
+  HDF5.  The calloc test can be skipped by running "prun ... testphdf5 -x
   calloc".  AKC - 2007/7/12.
 
 * The Intel C Compiler for the Linux x86_64 platform (EM64T-based, v8.1) has
@@ -1821,30 +1821,30 @@ Known Problems
   PROD_CFLAGS from -O3 to -O0.  Then run configure.  AKC - 2005/11/10.
 
 * When testing parallel HDF5 with the C compiler version MIPSpro 7.4.3 on IRIX
-  6.5, set the environment variable MPI_TYPE_MAX to be a bigger number, for 
-  example 120000, in order to pass the complicated collective IO tests inside 
-  the parallel HDF5 library. This is not a problem inside the parallel HDF5 
+  6.5, set the environment variable MPI_TYPE_MAX to be a bigger number, for
+  example 120000, in order to pass the complicated collective IO tests inside
+  the parallel HDF5 library. This is not a problem inside the parallel HDF5
   library. You can always set a bigger number on your system.  KY - 2005/10/6
 
-* A contiguous or chunked dataset created by a sequential version of HDF5 
-  might not be able to be modified with a parallel version of the library. 
-  Use the H5Pset_alloc_time function with H5D_ALLOC_TIME_EARLY to set up the 
+* A contiguous or chunked dataset created by a sequential version of HDF5
+  might not be able to be modified with a parallel version of the library.
+  Use the H5Pset_alloc_time function with H5D_ALLOC_TIME_EARLY to set up the
   dataset creation property list to avoid the problem.  EIP - 2005/09/09
 
-* A dataset created or rewritten with the v1.6.3 library or after can't 
-  be read with the v1.6.2 library or before when Fletcher32 EDC (a filter) is 
-  enabled.  There was a bug in the calculating code of the Fletcher32 
-  checksum in the library before v1.6.3.  The checksum value wasn't consistent 
-  between big-endian and little-endian systems.  This bug was fixed in 
-  Release 1.6.3.  However, after fixing the bug, the checksum value is no 
-  longer the same as before on little-endian system.  HDF5 library releases 
-  after 1.6.4 can still read datasets created or rewritten with an HDF5 
+* A dataset created or rewritten with the v1.6.3 library or after can't
+  be read with the v1.6.2 library or before when Fletcher32 EDC (a filter) is
+  enabled.  There was a bug in the calculating code of the Fletcher32
+  checksum in the library before v1.6.3.  The checksum value wasn't consistent
+  between big-endian and little-endian systems.  This bug was fixed in
+  Release 1.6.3.  However, after fixing the bug, the checksum value is no
+  longer the same as before on little-endian system.  HDF5 library releases
+  after 1.6.4 can still read datasets created or rewritten with an HDF5
   library of v1.6.2 or before.  SLU - 2005/7/8
 
 * For version 6 (6.02 and 6.04) of the Portland Group compiler on AMD Opteron
   processor, there's a bug in the compiler for optimization(-O2).  The library
-  failed in several tests, all related to the multi driver.  The problem has 
-  been reported to the vendor.  
+  failed in several tests, all related to the multi driver.  The problem has
+  been reported to the vendor.
 
 * test/big fails sometimes with the message "Possible overlap with another
   region."  The test selects regions randomly, and this error occurs when
@@ -1852,7 +1852,7 @@ Known Problems
   HDF5.  Since the error is triggered by a random situation, it will
   usually disappear if the test is re-run.
 
-* Newer SGI MIPSpro compilers (version 7.4.x) support C99 features but 
+* Newer SGI MIPSpro compilers (version 7.4.x) support C99 features but
   have a "guard" statement in stdint.h that will #error and skip the rest
   of the header file if the C99 option is not used explicitly.  Hardsetting
   $CC to c99 will resolve the problem. AKC - 2004/12/13
@@ -1863,11 +1863,11 @@ Known Problems
   and run the tests again.
 
   The tests may also fail with messages like "The socket name is already
-  in use".  HDF5 does not use sockets.  This is due to problems of the 
-  poe command trying to set up the debug socket.  Check whether there are 
-  many old /tmp/s.pedb.* files staying around.  These are sockets used by 
-  the poe command and left behind due to failed commands.  Ask your system 
-  administrator to clean them out.  Lastly, request IBM to provide a means 
+  in use".  HDF5 does not use sockets.  This is due to problems of the
+  poe command trying to set up the debug socket.  Check whether there are
+  many old /tmp/s.pedb.* files staying around.  These are sockets used by
+  the poe command and left behind due to failed commands.  Ask your system
+  administrator to clean them out.  Lastly, request IBM to provide a means
   to run poe without the debug socket.
 
 * The h5dump tests may fail to match the expected output on some platforms
@@ -1885,7 +1885,7 @@ Known Problems
 
   The --enable-static-exec configure flag also fails to correctly compile
   on the HPUX 11.00.
-  
+
   It is suggested that you don't use this option on these platforms
   during configuration.
 
@@ -1899,9 +1899,9 @@ Known Problems
   long long (absolute values less than 1**-308) to double.  This triggers
   the test/dtypes to report failure in the following test:
       Testing random sw long double -> double conversions
-  If -ieee is used, the converted doubles spread over the range 0.0 to 
-  10**-308.  If -ieee is not used, the converted double values are mostly 
-  0.0, but occasionally appear as 10**-308.  This has been reported to the 
+  If -ieee is used, the converted doubles spread over the range 0.0 to
+  10**-308.  If -ieee is not used, the converted double values are mostly
+  0.0, but occasionally appear as 10**-308.  This has been reported to the
   system staff.
 
   All other tests have passed.
@@ -1975,8 +1975,8 @@ HDF5-1.6.6  It contains information on the platforms tested and
 known problems in HDF5-1.6.6. For more details, check the HISTORY.txt
 file in the HDF5 source.
 
-HDF5 documentation can be found in the distributed release source 
-code in the subdirectory doc/html/ or on the THG (The HDF Group) 
+HDF5 documentation can be found in the distributed release source
+code in the subdirectory doc/html/ or on the THG (The HDF Group)
 ftp server (ftp.hdfgroup.org) in the directory:
 
      /HDF5/docs/
@@ -2020,28 +2020,28 @@ New Features
     Parallel Library:
     -----------------
         - None
-      
+
     Tools:
     ------
         - h52gif and gif2h5: Both these tools were revised to include High
             Level Image API support.  Tests were added to /hl/tools/gif2h5.
             PVN - 2007/04/13
-        - h5dump: Added support for double long type H5T_NATIVE_LDOUBLE. 
+        - h5dump: Added support for double long type H5T_NATIVE_LDOUBLE.
             PVN - 2007/03/13
         - h5dump: Added support for binary output; see usage. PVN 2007/03/13
         - h5repack: Added support for reading and writing by hyperslabs for
             large files. PVN - 2007/03/01
         - h5repack: A new option allows the copy to use the source file type
-            (default) instead of the previous conversion to native type. 
+            (default) instead of the previous conversion to native type.
             PVN - 2007/03/01
-        - h5repack: Added output of the percentage of compression achieved. 
+        - h5repack: Added output of the percentage of compression achieved.
             PVN - 2007/03/01
         - h5diff: Added support for comparing dataset regions. PVN -
           2007/02/20
-        - h5diff: Added support for reading and comparing by hyperslabs for 
+        - h5diff: Added support for reading and comparing by hyperslabs for
             large files.  PVN - 2007/02/20
         - h5diff: Added printing of dataset dimensions along with dataset
-          name. 
+          name.
             PVN - 2007/02/19
 
     F90 API:
@@ -2057,7 +2057,7 @@ Support for New Platforms, Languages and Compilers
 ==================================================
         - Added support for MAC Intel (Darwin 8.8.2)  (gcc 4.0.1 and g95 0.91)
                                 EIP - 2007/02/13
-        - Added support for GNU C compiler version 4.2.1 for FreeBSD 6.2 
+        - Added support for GNU C compiler version 4.2.1 for FreeBSD 6.2
           (32- and 64-bit)
 
 
@@ -2070,8 +2070,8 @@ Bug Fixes since HDF5-1.6.5 Release
             a variable-length datatype or component datatype.  QAK -
 2007/06/19
         - STDIO driver didn't support files bigger than 2GB because the OFFSET
-            parameter of fseek is of type LONG INT, not big enough for big 
-            files.  Use fseeko instead for big files if it's available on the 
+            parameter of fseek is of type LONG INT, not big enough for big
+            files.  Use fseeko instead for big files if it's available on the
             system.  SLU - 2007/4/5
         - Relaxed restrictions on attribute operations to allow a file ID to
             be used as the "location ID".  If a file ID is used, the attribute
@@ -2129,12 +2129,12 @@ corrupt object header - too few messages
 
     Configuration
     -------------
-        - Changed to default to --disable-shared if parallel is enabled. 
+        - Changed to default to --disable-shared if parallel is enabled.
             AKC - 2007/5/12
         - Corrected a coding error in configure when it tries to locate the
-          needed MPI and MPI-IO library for the fortran interface. 
+          needed MPI and MPI-IO library for the fortran interface.
             AKC - 007/5/9.
-        - Changed default fortran compiler to g95 when gcc is used. 
+        - Changed default fortran compiler to g95 when gcc is used.
             AKC - 007/2/17.
         - Configure can now use any tr command.  No more need for
             defining the variable TR, nor is it supported.  AKC - 2006/05/20
@@ -2142,28 +2142,28 @@ corrupt object header - too few messages
     Performance
     -------------
         - None
-   
+
     Tools
     -----
         - Fixed a bug in h5dump regarding the display of named datatypes
             attributes. PVN - 2007/03/13
-        - Fixed a bug in h5dump regarding the display of group comments. 
+        - Fixed a bug in h5dump regarding the display of group comments.
             PVN - 2007/03/13
-        - Fixed a bug in h5dump regarding the display of hardlinks pointing 
+        - Fixed a bug in h5dump regarding the display of hardlinks pointing
             to the root group.  PVN - 2007/03/13
         - Fixed a bug in the h5diff percentage option -p.  PVN - 2007/03/05
         - Fixed a bug in h5dump that caused array indices greater than 2^32-1
             not to be printed correctly.  PVN - 2007/2/19
 
-    Documentation 
-    ------------- 
-        - Corrected errors and extended the descriptions in Reference Manual 
-            entries for several functions.  
+    Documentation
+    -------------
+        - Corrected errors and extended the descriptions in Reference Manual
+            entries for several functions.
 
     F90 API
     -------
         - None
-                                
+
     C++ API
     -------
           - Changed
@@ -2193,13 +2193,13 @@ DataSpace&
 Documentation
 =============
 
-    HDF5 documentation can be found in the distributed release source 
-    code in the subdirectory doc/html/ (start with index.html) or on the 
+    HDF5 documentation can be found in the distributed release source
+    code in the subdirectory doc/html/ (start with index.html) or on the
     THG (The HDF Group) ftp server (ftp.hdfgroup.org) in the directory:
 
          /HDF5/docs/
 
-    Online documentation for the current release can be found on the THG 
+    Online documentation for the current release can be found on the THG
     web site:
 
          http://hdfgroup.org/HDF5/doc/
@@ -2235,17 +2235,17 @@ Platforms Tested
 
     Linux 2.6.9-42.0.10.ELsmp #1  gcc (GCC) 3.4.6
         SMP i686 i386             G95 (GCC 4.0.3 (g95 0.91!) Nov 21 2006)
-    (kagiso)                      PGI C, Fortran, C++ 6.2-5 32-bit 
-                                  icc (ICC) 9.1 
-                                  Intel(R) C++ Compiler for 32-bit 
+    (kagiso)                      PGI C, Fortran, C++ 6.2-5 32-bit
+                                  icc (ICC) 9.1
+                                  Intel(R) C++ Compiler for 32-bit
+                                      applications, Version 9.1
+                                  Intel(R) Fortran Compiler for 32-bit
                                       applications, Version 9.1
-                                  Intel(R) Fortran Compiler for 32-bit 
-                                      applications, Version 9.1 
                                   Absoft 32-bit Fortran 95 10.0.4
-                                  MPICH mpich2-1.0.4p1 compiled with  
-                                  gcc 3.4.6 and G95 (GCC 4.0.3 (g95 0.91!) 
+                                  MPICH mpich2-1.0.4p1 compiled with
+                                  gcc 3.4.6 and G95 (GCC 4.0.3 (g95 0.91!)
 
-    Linux 2.6.16.46-0.12-debug #1 
+    Linux 2.6.16.46-0.12-debug #1
         SMP ia64 GNU/Linux        Intel(R) C++ Version 10.0.025
     (ucar hir1)                   Intel(R) Fortran Itanium(R) Version 10.0.025
 
@@ -2255,14 +2255,14 @@ Platforms Tested
                                          for 64-bit target on x86-64
                                   tested for both 32- and 64-bit binaries
 
-    Linux 2.6.5-7.283-rtgfx Altix 
+    Linux 2.6.5-7.283-rtgfx Altix
         SMP ia64                  Intel(R) C++ Version 9.0
     (cobalt)                      Intel(R) Fortran Itanium(R) Version 9.0
                                   SGI MPI
 
-    OSF1 V5.1 (QSC)               Compaq C V6.5-011 
+    OSF1 V5.1 (QSC)               Compaq C V6.5-011
     (See "Known Problems.")       HP Fortran V5.5A-3548
-                                  Compaq C++ V6.5-036  
+                                  Compaq C++ V6.5-036
                                   MPIX200_64_r13.4
 
     SunOS 5.8 32- and 64-bit      Sun WorkShop 6 update 2 C 5.3
@@ -2272,7 +2272,7 @@ Platforms Tested
     SunOS 5.10 32- and 64-bit     Sun WorkShop 6 update 2 C 5.8
     (linew)                       Sun WorkShop 6 update 2 Fortran 95 8.2
                                   Sun WorkShop 6 update 2 C++ 5.8
-                                  Patch 121019-06 
+                                  Patch 121019-06
 
     Xeon Linux 2.4.21-32.0.1.ELsmp-perfctr-lustre
     (tungsten)                    Intel(R) C++ Version 9.0
@@ -2371,13 +2371,13 @@ SuSe Linux 2.6.16 SGI Altix ia64      n             n        n        y
 SuSe Linux 2.6.5 SGI Altix ia64       n             n        n        y
 OSF1 v5.1                             n             n        n        y
 
-Compiler versions for each platform are listed in the "Platforms Tested" 
-table found elsewhere in this file (RELEASE.txt).  Unless otherwise noted, 
+Compiler versions for each platform are listed in the "Platforms Tested"
+table found elsewhere in this file (RELEASE.txt).  Unless otherwise noted,
 compilers used are the system compilers.
 
 Footnotes:
 (1) Fortran compiled with g95.
-(2) In most cases, shared libraries are provided only for the C library, 
+(2) In most cases, shared libraries are provided only for the C library,
     except on Windows where they are provided for C, C++, and Fortran.
 (3) C++ works only with static libraries.
 
@@ -2394,7 +2394,7 @@ Known Problems
   "523648:lt-h5repacktst: rld: Fatal Error: Cannot Successfully map soname
   'libh5test.so.1' under any of the filenames .......(bunch of directories)
   "
-  And the testing will fail. 
+  And the testing will fail.
   We believe this is a libtool problem. One way to get rid of this is to
   add the paths of libh5test.so.1 and libh5.so.1 to the shared library path.
 
@@ -2407,15 +2407,15 @@ Known Problems
   setenv LD_LIBRARY64_PATH ......(existing pathes):[full path of HDF5
   directory/test/.libs]:[full path of HDF5 directory/src/.libs]
 
-  NOTE: This problem ONLY affects the testing of the HDF5 library when you 
-  build from source. It won't affect any applications that would like to link 
-  with the HDF5 shared library since the shared library path needs to be set 
+  NOTE: This problem ONLY affects the testing of the HDF5 library when you
+  build from source. It won't affect any applications that would like to link
+  with the HDF5 shared library since the shared library path needs to be set
   anyway.  KY - 2007/8/2
 
 * QSC (an HP alpha-based OSF1 cluster) failed the testpar/testphdf5 sub-test
-  "calloc".  All other tests passed.  This indicates that a dataset using 
-  chunked storage created by serial HDF5 may not work properly with parallel 
-  HDF5.  The calloc test can be skipped by running "prun ... testphdf5 -x 
+  "calloc".  All other tests passed.  This indicates that a dataset using
+  chunked storage created by serial HDF5 may not work properly with parallel
+  HDF5.  The calloc test can be skipped by running "prun ... testphdf5 -x
   calloc".  AKC - 2007/7/12.
 
 * The Intel C Compiler for the Linux x86_64 platform (EM64T-based, v8.1) has
@@ -2424,30 +2424,30 @@ Known Problems
   PROD_CFLAGS from -O3 to -O0.  Then run configure.  AKC - 2005/11/10.
 
 * When testing parallel HDF5 with the C compiler version MIPSpro 7.4.3 on IRIX
-  6.5, set the environment variable MPI_TYPE_MAX to be a bigger number, for 
-  example 120000, in order to pass the complicated collective IO tests inside 
-  the parallel HDF5 library. This is not a problem inside the parallel HDF5 
+  6.5, set the environment variable MPI_TYPE_MAX to be a bigger number, for
+  example 120000, in order to pass the complicated collective IO tests inside
+  the parallel HDF5 library. This is not a problem inside the parallel HDF5
   library. You can always set a bigger number on your system.  KY - 2005/10/6
 
-* A contiguous or chunked dataset created by a sequential version of HDF5 
-  might not be able to be modified with a parallel version of the library. 
-  Use the H5Pset_alloc_time function with H5D_ALLOC_TIME_EARLY to set up the 
+* A contiguous or chunked dataset created by a sequential version of HDF5
+  might not be able to be modified with a parallel version of the library.
+  Use the H5Pset_alloc_time function with H5D_ALLOC_TIME_EARLY to set up the
   dataset creation property list to avoid the problem.  EIP - 2005/09/09
 
-* The dataset created or rewritten with the v1.6.3 library or after can't 
-  be read with the v1.6.2 library or before when Fletcher32 EDC (a filter) is 
-  enabled.  There was a bug in the calculating code of the Fletcher32 
-  checksum in the library before v1.6.3.  The checksum value wasn't consistent 
-  between big-endian and little-endian systems.  This bug was fixed in 
-  Release 1.6.3.  However, after fixing the bug, the checksum value is no 
-  longer the same as before on little-endian system.  The library release 
+* The dataset created or rewritten with the v1.6.3 library or after can't
+  be read with the v1.6.2 library or before when Fletcher32 EDC (a filter) is
+  enabled.  There was a bug in the calculating code of the Fletcher32
+  checksum in the library before v1.6.3.  The checksum value wasn't consistent
+  between big-endian and little-endian systems.  This bug was fixed in
+  Release 1.6.3.  However, after fixing the bug, the checksum value is no
+  longer the same as before on little-endian system.  The library release
   after 1.6.4 can still read the dataset created or rewritten with the library
   of v1.6.2 or before.  SLU - 2005/7/8
 
 * For version 6 (6.02 and 6.04) of the Portland Group compiler on AMD Opteron
   processor, there's a bug in the compiler for optimization(-O2).  The library
-  failed in several tests, all related to the multi driver.  The problem has 
-  been reported to the vendor.  
+  failed in several tests, all related to the multi driver.  The problem has
+  been reported to the vendor.
 
 * test/big fails sometimes with the message "Possible overlap with another
   region."  The test selects regions randomly, and this error occurs when
@@ -2455,7 +2455,7 @@ Known Problems
   HDF5.  Since the error is triggered by a random situation, it will
   usually disappear if the test is re-run.
 
-* Newer SGI MIPSpro compilers (version 7.4.x) support C99 features but 
+* Newer SGI MIPSpro compilers (version 7.4.x) support C99 features but
   have a "guard" statement in stdint.h that will #error and skip the rest
   of the header file if the C99 option is not used explicitly.  Hardsetting
   $CC to c99 will resolve the problem. AKC - 2004/12/13
@@ -2468,7 +2468,7 @@ Known Problems
   The tests may also fail with messages like "The socket name is already
   in use".  HDF5 does not use sockets (except for stream-VFD).  This is
   due to problems of the poe command trying to set up the debug socket.
-  Check whether there are many old /tmp/s.pedb.* files staying around.  These 
+  Check whether there are many old /tmp/s.pedb.* files staying around.  These
   are sockets used by the poe command and left behind due to failed commands.
   Ask your system administrator to clean them out.  Lastly, request IBM
   to provide a means to run poe without the debug socket.
@@ -2494,7 +2494,7 @@ Known Problems
 
   The --enable-static-exec configure flag also fails to correctly compile
   on the HPUX 11.00.
-  
+
   It is suggested that you don't use this option on these platforms
   during configuration.
 
@@ -2510,9 +2510,9 @@ Known Problems
   long long (absolute values less than 1**-308) to double.  This triggers
   the test/dtypes to report failure in the following test:
       Testing random sw long double -> double conversions
-  If -ieee is used, the converted doubles spread over the range 0.0 to 
-  10**-308.  If -ieee is not used, the converted double values are mostly 
-  0.0, but occasionally appear as 10**-308.  This has been reported to the 
+  If -ieee is used, the converted doubles spread over the range 0.0 to
+  10**-308.  If -ieee is not used, the converted double values are mostly
+  0.0, but occasionally appear as 10**-308.  This has been reported to the
   system staff.
 
   All other tests have passed.
@@ -2637,7 +2637,7 @@ New Features
     Library:
     --------
         - Added HSYS_ERROR which retrieves the system error message and pushes
-          it to the error stack.  This provides more information regarding the 
+          it to the error stack.  This provides more information regarding the
 	  failed system call. AKC - 2005/08/04
         - Added H5F_OBJ_LOCAL flag to H5Fget_obj_count() & H5Fget_obj_ids(), to
           allow querying for objects in a file that was opened with a particular
@@ -2650,9 +2650,9 @@ New Features
 	- HDF5 supports collective MPI-IO for irregular selection with HDF5
 	  dataset. Irregular selection is when users use API H5Sselect_hyperslab
 	  more than once for the same dataset.
-	  Currently, not all MPI-IO packages support the complicated 
-	  MPI derived datatypes used in the implementation of irregular 
-	  selections INSIDE HDF5. 
+	  Currently, not all MPI-IO packages support the complicated
+	  MPI derived datatypes used in the implementation of irregular
+	  selections INSIDE HDF5.
 	  1) DEC 5.x wdoes not support complicated derived datatypes.
 	  2) For AIX 5.1:
 	     If your poe version number is 3.2.0.20 or lower,
@@ -2666,15 +2666,15 @@ New Features
 	     If mpich version is 1.2.5 or lower, collective irregular selection
 	     IO is not supported; internally independent IO is used.
 	  4) For IRIX 6.5:
-	     if C compiler version is 7.3 or lower, collective irregular 
+	     if C compiler version is 7.3 or lower, collective irregular
 	     selection IO is not supported; internally independent IO is used.
-	  5) For platforms which internally used mpich: 
-	     If the mpich version is 1.2.5 or lower, please find the 
+	  5) For platforms which internally used mpich:
+	     If the mpich version is 1.2.5 or lower, please find the
 	     corresponding config (in hdf5/config) file and add
-	         hdf5_mpi_complex_derived_datatype_works='no' 
-	     at the end of the configuration file. For example, on the 
-	     NCSA SGI Altix, the internal mpich library is 1.2.5. So 
-	         hdf5_mpi_complex_derived_datatype_works='no' 
+	         hdf5_mpi_complex_derived_datatype_works='no'
+	     at the end of the configuration file. For example, on the
+	     NCSA SGI Altix, the internal mpich library is 1.2.5. So
+	         hdf5_mpi_complex_derived_datatype_works='no'
 	     should be added at the end of the config file ia64-linux-gnu.
 	     KY - 2005/09/12
 
@@ -2708,9 +2708,9 @@ Support for New Platforms, Languages and Compilers
     - Added support for RedStorm platform (serial only.)  AKC 2005/11/10
     - Added support for BG/L platform (serial only.)  LA 2005/11/10
     - Added support for HPUX 11.23 (IA64); only C and C++ are supported
-      with the +DD64 flag 
+      with the +DD64 flag
                                              EIP 2005/10/05
- 
+
 
     Configuration
     -------------
@@ -2722,8 +2722,8 @@ Bug Fixes since HDF5-1.6.4 Release
 
     Library
     -------
-        - Fixed collective IO in chunking-storage.  HDF5 may have called the 
-            wrong routine when the shape of the dataspace in the file and in 
+        - Fixed collective IO in chunking-storage.  HDF5 may have called the
+            wrong routine when the shape of the dataspace in the file and in
             the bufferred chunk were different. This bug was fixed to make sure
             the correct routine is called. KY - 2005/10/19
         - Fixed core dump when closing root groups opened through two different
@@ -2777,23 +2777,23 @@ Bug Fixes since HDF5-1.6.4 Release
 
     Performance
     -------------
-        - Optimized I/O for enumerated datatypes that are a superset of a 
+        - Optimized I/O for enumerated datatypes that are a superset of a
             source enumerated datatype.  QAK - 2005/03/19
-   
+
     Tools
     -----
 
-    Documentation 
-    ------------- 
+    Documentation
+    -------------
 
     F90 API
     -------
        - h5pget_driver_f was returning information that could not be
          interpreted by a Fortran application program; fixed. EIP - 2005/04/10
-                                
+
     C++ API
     -------
-	- Several member functions' prototype changed due to the 
+	- Several member functions' prototype changed due to the
 	  "int -> unsigned" change in the main library.  They are:
 		H5::CompType::getMemberDataType(unsigned member_num)
 		H5::CompType::getMemberCompType(unsigned member_num)
@@ -2805,7 +2805,7 @@ Bug Fixes since HDF5-1.6.4 Release
 
 
 
-   
+
 
 Platforms Tested
 ================
@@ -2839,7 +2839,7 @@ Platforms Tested
     FreeBSD 4.11                  gcc 2.95.4
                                   g++ 2.95.4
                                   gcc 3.2.3, 3.3.6, 3.4.4, 4.0.0
-    HP-UX B.11.00                 HP C  HP92453-01 A.11.01.20 
+    HP-UX B.11.00                 HP C  HP92453-01 A.11.01.20
                                   HP F90 v2.4
                                   HP ANSI C++ B3910B A.03.13
     HP-UX B.11.23                 HP aC++/ANSI C B3910B A.06.00
@@ -2854,27 +2854,27 @@ Platforms Tested
 				  mpt 1.6
     Linux 2.4.20-28.7             gcc 2.96
     (eirene, verbena)             gcc 3.3.2
-                                  PGI compilers (pgcc, pgf90, pgCC) 
+                                  PGI compilers (pgcc, pgf90, pgCC)
                                   version 5.2-1
                                   Absoft Fortran compiler v9.0
                          	  Intel(R) C++ 32-bit Version 8.1
     				  Intel(R) Fortran 32-bit Version 8.1
                                   MPIch 1.2.6
     Linux 2.4.21-268-smp x86_64   gcc 3.3.1 (SuSE Linux, AMD)
-    (mir)                         PGI 5.2-1 C and F90 (with k3-32) 
+    (mir)                         PGI 5.2-1 C and F90 (with k3-32)
                          	  Intel(R) C++ 32-bit Version 8.1
     				  Intel(R) Fortran 32-bit Version 8.1
-    Linux 2.4.21-sgi306rp21 Altix 
+    Linux 2.4.21-sgi306rp21 Altix
           SMP ia64                Intel(R) C++ Version 8.1
     (cobalt)                      Intel(R) Fortran Itanium(R) Version 8.1
                                   SGI MPI
-    OSF1 V5.1 (QSC)               Compaq C V6.5-011 
+    OSF1 V5.1 (QSC)               Compaq C V6.5-011
                                   HP Fortran V5.5A-3548
-				  Compaq C++ V6.5-036  
+				  Compaq C++ V6.5-036
 				  MPIX200_64_r13.4
-    OSF1 V5.1 (PSC)               Compaq C V6.5-303 
+    OSF1 V5.1 (PSC)               Compaq C V6.5-303
                                   HP Fortran V5.5A-3548
-				  Compaq C++ V6.5-040  
+				  Compaq C++ V6.5-040
     SunOS 5.8 32,46               Sun WorkShop 6 update 2 C 5.3
      (Solaris 2.8)                Sun WorkShop 6 update 2 Fortran 90
                                   Sun WorkShop 6 update 2 C++ 5.3
@@ -2884,7 +2884,7 @@ Platforms Tested
     SunOS 5.10                    Sun WorkShop 6 update 2 C 5.3
                                   Sun WorkShop 6 update 2 Fortran 95 6.2
                                   Sun WorkShop 6 update 2 C++ 5.3
-                                  Patch 111685-13 
+                                  Patch 111685-13
     Xeon Linux 2.4.21-32.0.1.ELsmp-perfctr-lustre
     (tungsten)	                  Intel(R) C++ Version 9.0
                                   Intel(R) Fortran Compiler Version 9.0
@@ -2896,9 +2896,9 @@ Platforms Tested
                                   MSVC++ 6.0
                                   Intel 8.1 C++
     MAC OS X                      Darwin 7.5
-                                  gcc and g++ Apple Computer, Inc. GCC 
+                                  gcc and g++ Apple Computer, Inc. GCC
                                   version 1175, based on gcc version 3.3.2
-                                  IBM XL Fortran version 8.1 
+                                  IBM XL Fortran version 8.1
                                   Absoft Fortran compiler v8.2
 
 
@@ -2912,7 +2912,7 @@ Key:   y   = tested and supported
        ( ) = footnote appears below second table
 
 Platform                             C        F90    F90      C++  zlib  SZIP
-                                     parallel        parallel      
+                                     parallel        parallel
 IBM BG/L (16)			     n        n      n        n    y     y
 Solaris2.8 64-bit                    y        y      y(1)     y    y     y
 Solaris2.8 32-bit                    y        y      y(1)     y    y     y
@@ -2944,8 +2944,8 @@ Linux 2.4 SuSE ia64 C Intel (3,7)    y        y      y        y    y     y
 Linux 2.4 SGI Altix ia64 Intel (3)   y        y      y        y    y     y
 
 
-Platform                             Shared        static-  Thread-  STREAM- 
-                                     libraries(4)  exec     safe     VFD    
+Platform                             Shared        static-  Thread-  STREAM-
+                                     libraries(4)  exec     safe     VFD
 IBM BG/L 			     n              y       n        n
 Solaris2.8 64-bit                    y              x       y        y
 Solaris2.8 32-bit                    y              x       y        y
@@ -2976,28 +2976,28 @@ Linux 2.4 SuSE ia64 C Intel (3,7)    y              y       n        n
 Linux 2.4 SGI Altix ia64 Intel  (3)  y              y       n        y
 
 
-Compiler versions for each platform are listed in the "Platforms Tested" 
-table found elsewhere in this file (RELEASE.txt).  Unless otherwise noted, 
+Compiler versions for each platform are listed in the "Platforms Tested"
+table found elsewhere in this file (RELEASE.txt).  Unless otherwise noted,
 compilers used are the system compilers.
 
 Footnotes:  (1) Using mpich 1.2.6
             (2) Using mpt and mpich 1.2.6.
-            (3) Linux 2.4 with GNU, Intel, and PGI compilers, as indicated.  
+            (3) Linux 2.4 with GNU, Intel, and PGI compilers, as indicated.
                   W or C indicates workstation or cluster, respectively.
-            (4) Shared libraries are provided only for the C library, 
+            (4) Shared libraries are provided only for the C library,
                 except on Windows where they are provided for C and C++.
             (5) Using mpt.
-            (6) Linux 2.4.21-32.0.1.  Xeon cluster with ELsmp-perfctr-lustre 
+            (6) Linux 2.4.21-32.0.1.  Xeon cluster with ELsmp-perfctr-lustre
                 and Intel compilers
             (7) Linux 2.4.21, SuSE_292.til1.  Ia64 cluster with Intel compilers
             (8) Intel 8.1
             (9) One test of this release failed with Compaq Visual Fortran 6.6c.
                 No binary fortran release will be provided. Users should build
-                the library by themselves and use it at their own risk. 
-                We recommend that users use HDF5 1.7 instead 
+                the library by themselves and use it at their own risk.
+                We recommend that users use HDF5 1.7 instead
                 or use Compaq Visual Fortran 6.0.
            (10) IBM XLF and Absoft
-           (11) PGI, Absoft.  No shared libraries with Absoft; 
+           (11) PGI, Absoft.  No shared libraries with Absoft;
                 use '--disable-shared'.
            (12) PGI and Intel compilers for both C and Fortran
            (13) AMD Opteron x86_64
@@ -3014,43 +3014,43 @@ Known Problems
   configure, edit the file config/intel-flags by changing the setting of
   PROD_CFLAGS from -O3 to -O0, then run configure.  AKC - 2005/11/10.
 
-* Fortran testing and compiling failures on windows XP 
+* Fortran testing and compiling failures on windows XP
   1. Compaq visual fortran 6.6c with VS 6.0
      The Fortran tests failed for both release, release dll, debug and debug
      dll. The failure is a random one. We won't provide fortran libraries. The
-     same test passed with the 1.7.51 snapshot. You may find the 1.7.51 
+     same test passed with the 1.7.51 snapshot. You may find the 1.7.51
      snapshot under ftp://hdf.ncsa.uiuc.edu/pub/outgoing/hdf5/snapshots/.
   2. Intel fortran 8.1 under .Net environment
      The fortran library cannot even be compiled. Some users have pointed this
      to intel forum.
 
 * When testing parallel HDF5 with the C compiler version MIPSpro 7.4.3 at IRIX
-  6.5, set enviroment variable MPI_TYPE_MAX to be a bigger number, for example 
-  120000, in order to pass the complicated collective IO tests inside parallel 
-  HDF5 library. This is not a problem inside parallel HDF5 library. You can 
+  6.5, set enviroment variable MPI_TYPE_MAX to be a bigger number, for example
+  120000, in order to pass the complicated collective IO tests inside parallel
+  HDF5 library. This is not a problem inside parallel HDF5 library. You can
   always set a bigger number in your system.
                                   KY - 2005/10/6
 
 * A contiguous or chunked dataset created by a sequential version may
-  not be modified with a parallel version of the library. 
-  Use the H5Pset_alloc_time function with H5D_ALLOC_TIME_EARLY to set up the 
+  not be modified with a parallel version of the library.
+  Use the H5Pset_alloc_time function with H5D_ALLOC_TIME_EARLY to set up the
   dataset creation property list to avoid the problem.
                                     EIP - 2005/09/09
 
-* The dataset created or rewritten with the v1.6.3 library or after can't 
-  be read with the v1.6.2 library or before when Fletcher32 EDC(filter) is 
-  enabled.  There was a bug in the calculating code of the Fletcher32 
-  checksum in the library before v1.6.3.  The checksum value wasn't consistent 
-  between big-endian and little-endian systems.  This bug was fixed in 
-  Release 1.6.3.  However, after fixing the bug, the checksum value is no 
-  longer the same as before on little-endian system.  The library release 
+* The dataset created or rewritten with the v1.6.3 library or after can't
+  be read with the v1.6.2 library or before when Fletcher32 EDC(filter) is
+  enabled.  There was a bug in the calculating code of the Fletcher32
+  checksum in the library before v1.6.3.  The checksum value wasn't consistent
+  between big-endian and little-endian systems.  This bug was fixed in
+  Release 1.6.3.  However, after fixing the bug, the checksum value is no
+  longer the same as before on little-endian system.  The library release
   after 1.6.4 can still read the dataset created or rewritten with the library
   of v1.6.2 or before.  SLU - 2005/7/8
 
 * For version 6 (6.02 and 6.04) of the Portland Group compiler on AMD Opteron
   processor, there's a bug in the compiler for optimization(-O2).  The library
-  failed in several tests but all related to multi driver.  The problem has 
-  been reported to the vendor.  
+  failed in several tests but all related to multi driver.  The problem has
+  been reported to the vendor.
 
 * test/big fails sometimes with the message "Possible overlap with another
   region."  The test selects regions randomly, and this error occurs when
@@ -3075,9 +3075,9 @@ Known Problems
   Ask your system administrator to clean them out.  Lastly, request IBM
   to provide a means to run poe without the debug socket.
 
-* Two h5dump xml tests(h5dump --xml thlink.h5 and h5dump --xml tmany.h5) 
-  failed on windows xp with .NET for debug and debug dll. Release and 
-  Release dll work fine. 
+* Two h5dump xml tests(h5dump --xml thlink.h5 and h5dump --xml tmany.h5)
+  failed on windows xp with .NET for debug and debug dll. Release and
+  Release dll work fine.
 
 * The h5dump tests may fail to match the expected output on some platforms
   (e.g. parallel jobs, Windows) where the error messages directed to
@@ -3100,14 +3100,14 @@ Known Problems
 
   The --enable-static-exec configure flag also fails to correctly compile
   on the HPUX 11.00.
-  
+
   It is suggested that you don't use this option on these platforms
   during configuration.
 
 * The Stream VFD was not tested yet under Windows.
 
 
-* Before building HDF5 F90 Library from source on Crays 
+* Before building HDF5 F90 Library from source on Crays
   replace H5Aff.f90, H5Dff.f90 and H5Pff.f90 files in the fortran/src
   subdirectory in the top level directory with the Cray-specific files
   from the site:
@@ -3129,10 +3129,10 @@ Known Problems
   All other tests have passed.
 
 * Fortran release DLL randomly failed with Compaq Visual Fortran 6.6c on
-  Windows. 
+  Windows.
 
 * Fortran DLL built with Intel 8.1 in .NET environment crushed the compiler,
-  Building Fortran static library with Intel 8.1 in .NET environment 
+  Building Fortran static library with Intel 8.1 in .NET environment
   requires manually setting the project file.
   Please contact to hdfhelp@ncsa.uiuc.edu if you need to build
   Fortran static library with Intel 8.1 with .NET environment.
@@ -3213,7 +3213,7 @@ The HDF5 documentation can be found on the NCSA ftp server
      /HDF/HDF5/docs/
 
 For more information look at the HDF5 home page at:
-   
+
     http://hdf.ncsa.uiuc.edu/HDF5/
 
 If you have any questions or comments, please send them to:
@@ -3241,19 +3241,19 @@ New Features
     For HL documentation, see
     http://hdf.ncsa.uiuc.edu/HDF5/hdf5_hl/doc/RM_hdf5hl.html.
 
-    The HL library, libhdf5_hl.a(so), is built and installed by default. 
+    The HL library, libhdf5_hl.a(so), is built and installed by default.
     Use --disable-hl configure flag to disable the HL library.
 
     Library:
     --------
-        - We recommend you to use SZIP v2.0 with this release. 
+        - We recommend you to use SZIP v2.0 with this release.
           For more information see
-          http://hdf.ncsa.uiuc.edu/doc_resource/SZIP/ 
-        - The compound datatype has been enhanced with a new feature of size 
+          http://hdf.ncsa.uiuc.edu/doc_resource/SZIP/
+        - The compound datatype has been enhanced with a new feature of size
             adjustment.  The size can be increased and decreased (without
-            cutting the last member).  No API change is involved.  SLU - 
+            cutting the last member).  No API change is involved.  SLU -
             2004/10/1
-        - Removed PABLO support.  2005/01/20 EIP 
+        - Removed PABLO support.  2005/01/20 EIP
 
     Parallel Library:
     -----------------
@@ -3262,7 +3262,7 @@ New Features
 
     Tools:
     ------
-	- New tool, h5jam.  See HDF5 Reference Manual.  2004/10/08	      
+	- New tool, h5jam.  See HDF5 Reference Manual.  2004/10/08
 
     F90 API:
     --------
@@ -3271,7 +3271,7 @@ New Features
     C++ API:
     --------
 	- Started using C library's reference counting in place of the class
-	  RefCounter, which existed before the C mechanism was available.  
+	  RefCounter, which existed before the C mechanism was available.
 	  As a result, RefCounter has been removed.  2005/03/12 BMR
 
 
@@ -3294,8 +3294,8 @@ Bug Fixes since HDF5-1.6.3 release
 	  accessing the file for another purpose (e.g., open with truncate)
 	  while other "slower" processes have not closed the same file with
 	  the previous purpose.  AKC - 2005/03/01
-	- H5Tget_member_value calls for enum datatype didn't return correct 
-          value if H5Tenum_valueof was called first.  It's fixed.  SLU - 
+	- H5Tget_member_value calls for enum datatype didn't return correct
+          value if H5Tenum_valueof was called first.  It's fixed.  SLU -
           2005/02/08
         - For variable-length string, H5Tget_class returned H5T_STRING as its
           class.  But H5Tdetect_class and H5Tget_member_class considered it
@@ -3307,7 +3307,7 @@ Bug Fixes since HDF5-1.6.3 release
         - Fixed segmentation fault when calling H5Fflush with an attribute that
           hasn't had a value written to it open.  QAK - 2004/10/18
         - Backed out support for bitfield and time types in H5Tget_native_type.
-          Leave it to future support.  The function simply returns error 
+          Leave it to future support.  The function simply returns error
           message of "not support" for bitfield and time types. SLU - 2004/10/5
         - Fixed address check in Core VFL driver to avoid spurious address/size
           overflows for odd valued addresses and/or sizes.  QAK - 2004/09/27
@@ -3328,18 +3328,18 @@ Bug Fixes since HDF5-1.6.3 release
     -------------
     Many changes were made to the library to improve performance,
     especially for the variable-length datatypes and metadata cache.
-   
+
     Tools
     -----
         - h5fc and h5c++ work correctly when -c compiler flag
-          is used.  EIP - 2005/03/14        
+          is used.  EIP - 2005/03/14
 	- Fixed h5dump to print attributes data in ASCII if -r option is used.
 	  AKC - 2004/11/18
-        - Fixed space utilization reported in h5ls to correct error 
+        - Fixed space utilization reported in h5ls to correct error
           in formula used.  QAK - 2004/10/22
 
-    Documentation 
-    ------------- 
+    Documentation
+    -------------
 
     F90 API
     -------
@@ -3356,7 +3356,7 @@ Documentation
 
     HDF5 Library documentation
     --------------------------
-    No substantive changes to the structure or types of content in the 
+    No substantive changes to the structure or types of content in the
     HDF5 Library documentation.
 
     Windows installation documentation
@@ -3365,10 +3365,10 @@ Documentation
        either http://www.zlib.net/zlib122-dll.zip or
               ftp://hdf.ncsa.uiuc.edu/lib-external/zlib/bin/windows
 
-    2. Only DLLs of external libraries (zlib and szip) are linked with the 
-       HDF5 Library. We will no longer provide binary to link static library 
+    2. Only DLLs of external libraries (zlib and szip) are linked with the
+       HDF5 Library. We will no longer provide binary to link static library
        with HDF5. For details, please check INSTALL_Windows in this directory.
-        
+
 
 Platforms Tested
 ================
@@ -3400,7 +3400,7 @@ Platforms Tested
     FreeBSD 4.9                   gcc 2.95.4
                                   g++ 2.95.4
                                   gcc 3.2.3, 3.3.6, 3.4.4, 4.0.0
-    HP-UX B.11.00                 HP C  HP92453-01 A.11.01.20 
+    HP-UX B.11.00                 HP C  HP92453-01 A.11.01.20
                                   HP F90 v2.4
                                   HP ANSI C++ B3910B A.03.13
                                   MPIch 1.2.4
@@ -3413,29 +3413,29 @@ Platforms Tested
 				  mpt 1.6
     Linux 2.4.20-28.7             gcc 2.96
     (eirene, verbena)             gcc 3.3.2
-                                  PGI compilers (pgcc, pgf90, pgCC) 
+                                  PGI compilers (pgcc, pgf90, pgCC)
                                   version 5.2-1
                                   Absoft Fortran compiler v9.0
                          	  Intel(R) C++ 32-bit Version 8.1
     				  Intel(R) Fortran 32-bit Version 8.1
                                   MPIch 1.2.6
     Linux 2.4.21-268-smp x86_64   gcc 3.3.1 (SuSE Linux, AMD)
-    (mir)                         PGI 5.2-1 C and F90 (with k3-32) 
+    (mir)                         PGI 5.2-1 C and F90 (with k3-32)
                          	  Intel(R) C++ 32-bit Version 8.1
     				  Intel(R) Fortran 32-bit Version 8.1
-    Linux 2.4.21-sgi303r2 Altix 
+    Linux 2.4.21-sgi303r2 Altix
           SMP ia64                Intel(R) C++ Version 8.1
     (cobalt)                      Intel(R) Fortran Itanium(R) Version 8.1
                                   SGI MPI
-    OSF1 V5.1 (QSC)               Compaq C V6.5-011 
+    OSF1 V5.1 (QSC)               Compaq C V6.5-011
                                   HP Fortran V5.5A-3548
-				  Compaq C++ V6.5-036  
+				  Compaq C++ V6.5-036
 				  MPIX200_64_r13.4
-    OSF1 V5.1 (PSC)               Compaq C V6.5-303 
+    OSF1 V5.1 (PSC)               Compaq C V6.5-303
                                   HP Fortran V5.5A-3548
-				  Compaq C++ V6.5-040  
+				  Compaq C++ V6.5-040
 				  MPIX200_64_r13.4
-                                  FORTRAN 90 2.0 Patch 107356-04 
+                                  FORTRAN 90 2.0 Patch 107356-04
     SunOS 5.8 32,46               Sun WorkShop 6 update 2 C 5.3
      (Solaris 2.8)                Sun WorkShop 6 update 2 Fortran 90
                                   Sun WorkShop 6 update 2 C++ 5.3
@@ -3456,9 +3456,9 @@ Platforms Tested
                                   Compaq Visual Fortran 6.6C
                                   Intel 8.1 C++
     MAC OS X                      Darwin 7.5
-                                  gcc and g++ Apple Computer, Inc. GCC 
+                                  gcc and g++ Apple Computer, Inc. GCC
                                   version 1175, based on gcc version 3.3.2
-                                  IBM XL Fortran version 8.1 
+                                  IBM XL Fortran version 8.1
                                   Absoft Fortran compiler v8.2
 
 
@@ -3472,7 +3472,7 @@ Key:   y   = tested and supported
        ( ) = footnote appears below second table
 
 Platform                             C        F90    F90      C++  zlib  SZIP
-                                     parallel        parallel      
+                                     parallel        parallel
 Solaris2.8 64-bit                    y        y      y(1)     y    y     y
 Solaris2.8 32-bit                    y        y      y(1)     y    y     y
 Solaris2.9 64-bit                    y(1)     y      y(1)     y    y     y
@@ -3500,8 +3500,8 @@ Linux 2.4 SuSE ia64 C Intel (3,7)    y        y      y        y    y     y
 Linux 2.4 SGI Altix ia64 Intel (3)   y        y      y        y    y     y
 
 
-Platform                             Shared        static-  Thread-  STREAM- 
-                                     libraries(4)  exec     safe     VFD    
+Platform                             Shared        static-  Thread-  STREAM-
+                                     libraries(4)  exec     safe     VFD
 Solaris2.8 64-bit                    y              x       y        y
 Solaris2.8 32-bit                    y              x       y        y
 Solaris2.9 64-bit                    y              x       y        y
@@ -3529,24 +3529,24 @@ Linux 2.4 SuSE ia64 C Intel (3,7)    y              y       n        n
 Linux 2.4 SGI Altix ia64 Intel  (3)  y              y       n        y
 
 
-Compiler versions for each platform are listed in the "Platforms Tested" 
-table found elsewhere in this file (RELEASE.txt).  Unless otherwise noted, 
+Compiler versions for each platform are listed in the "Platforms Tested"
+table found elsewhere in this file (RELEASE.txt).  Unless otherwise noted,
 compilers used are the system compilers.
 
 Footnotes:  (1) Using mpich 1.2.6
             (2) Using mpt and mpich 1.2.6.
-            (3) Linux 2.4 with GNU, Intel, and PGI compilers, as indicated.  
+            (3) Linux 2.4 with GNU, Intel, and PGI compilers, as indicated.
                   W or C indicates workstation or cluster, respectively.
-            (4) Shared libraries are provided only for the C library, 
+            (4) Shared libraries are provided only for the C library,
                 except on Windows where they are provided for C and C++.
             (5) Using mpt.
-            (6) Linux 2.4.20-31.9.  Xeon cluster with smp_perfctr_lustre 
+            (6) Linux 2.4.20-31.9.  Xeon cluster with smp_perfctr_lustre
                 and Intel compilers
             (7) Linux 2.4.21, SuSE_128.befl.  Ia64 cluster with Intel compilers
             (8) Intel 8.1
             (9) Compaq Visual Fortran 6.6C
            (10) IBM XLF and Absoft
-           (11) PGI, Absoft.  No shared libraries with Absoft; 
+           (11) PGI, Absoft.  No shared libraries with Absoft;
                 use '--disable-shared'.
            (12) PGI and Intel compilers for both C and Fortran
            (13) AMD Opteron x86_64
@@ -3583,12 +3583,12 @@ Known Problems
   Ask your system administrator to clean them out.  Lastly, request IBM
   to provide a mean to run poe without the debug socket.
 
-* Fortran subroutine h5pget_driver_f doesn't return a correct driver 
+* Fortran subroutine h5pget_driver_f doesn't return a correct driver
   information.
 
-* There are two h5dump xml tests(h5dump --xml thlink.h5 and 
-  h5dump --xml tmany.h5) failed on windows xp with .NET for debug and 
-  debug dll. Release and Release dll work fine. 
+* There are two h5dump xml tests(h5dump --xml thlink.h5 and
+  h5dump --xml tmany.h5) failed on windows xp with .NET for debug and
+  debug dll. Release and Release dll work fine.
 
 * The h5dump tests may fail to match the expected output on some platforms
   (e.g. parallel jobs, Windows) where the error messages directed to
@@ -3608,7 +3608,7 @@ Known Problems
   The --enable-static-exec configure flag also fails to correctly compile
   on IBM SP2 platform for the serial mode. The parallel mode works fine
   with this option.
-  
+
   It is suggested that you don't use this option on these platforms
   during configuration.
 
@@ -3627,15 +3627,15 @@ Known Problems
       the different precision in the values displayed.
       h5ls appears to be dumping floating-point numbers correctly.
 
-* Before building HDF5 F90 Library from source on Crays 
+* Before building HDF5 F90 Library from source on Crays
   replace H5Aff.f90, H5Dff.f90 and H5Pff.f90 files in the fortran/src
   subdirectory in the top level directory with the Cray-specific files
   from the site:
   ftp://ftp.ncsa.uiuc.edu/HDF/HDF5/current/src/patches/
 
-* On some platforms that use Intel and Absoft compilers to build HDF5 fortran 
-  library, compilation may fail for fortranlib_test.f90, fflush1.f90 and 
-  fflush2.f90 complaining about exit subroutine. Comment out the line 
+* On some platforms that use Intel and Absoft compilers to build HDF5 fortran
+  library, compilation may fail for fortranlib_test.f90, fflush1.f90 and
+  fflush2.f90 complaining about exit subroutine. Comment out the line
   IF (total_error .ne. 0) CALL exit (total_error)
 
 * Use --disable-shared configure flag if building with Absoft Fortran
@@ -3660,10 +3660,10 @@ Known Problems
         setenv CXX "pgCC -tlocal" for others
 
 * Fortran release DLL randomly failed with compaq visual fortran 6.6c on
-  windows. 
+  windows.
 
 * Fortran DLL built with Intel 8.1 in .NET environment crushed the compiler,
-  To build Fortran Static library with Intel 8.1 in .NET environment 
+  To build Fortran Static library with Intel 8.1 in .NET environment
   needs manually setting the project file,
   please contact to hdfhelp@ncsa.uiuc.edu if you need to build
   fortran static library with Intel 8.1 with .NET environment.
@@ -3745,7 +3745,7 @@ The HDF5 documentation can be found on the NCSA ftp server
      /HDF/HDF5/docs/
 
 For more information look at the HDF5 home page at:
-   
+
     http://hdf.ncsa.uiuc.edu/HDF5/
 
 If you have any questions or comments, please send them to:
@@ -3776,36 +3776,36 @@ New Features
 
         - WINDOWS building,testing and installing improvements
 
-          - On Windows, FORTRAN,C++ and C projects are merged into one zip file, 
-            users can choose an option to build either FORTRAN or C++ or both 
+          - On Windows, FORTRAN,C++ and C projects are merged into one zip file,
+            users can choose an option to build either FORTRAN or C++ or both
             with basic C library.For detailed information,
             please read INSTALL_Windows.txt.
 
           - On Windows, szip compression library with or without encoder can be easily
             turned off or on when building HDF5.  For detailed information,
-            please read INSTALL_Windows.txt, especially section V. 
-  
+            please read INSTALL_Windows.txt, especially section V.
+
           - On Windows, an optional procedure for building,testing and installing
             HDF5 from command line is provided. This procedure is supposed to be
-            convenient for experienced users, please read 
+            convenient for experienced users, please read
             INSTALL_windows_From_Command_Line.txt for details.
 
           - On Windows, an alternative short instruction document for building,
             testing and installing HDF5 is provided. This instruction is supposed to
-            be convenient for general users, please read 
+            be convenient for general users, please read
             INSTALL_Windows_Short.txt for details.
 
           - On Windows, h5repack,h5diff,h5ls and h5import tool tests have been added.
           KY - 2004/9/16
-  
+
 
     Library:
     --------
         - Modified the way how HDF5 calculates 'pixels_per_scanline' parameter for
-          SZIP compression. Now there is no restriction on the size and shape of the 
-          chunk except that the total number of elements in the chunk cannot be 
+          SZIP compression. Now there is no restriction on the size and shape of the
+          chunk except that the total number of elements in the chunk cannot be
           bigger than 'pixels_per_block' parameter provided by the user.
-                                                                    EIP - 2004/07/21 
+                                                                    EIP - 2004/07/21
         - HDF5 can now link to SZIP with or without szip's encoder.
           The new API function H5Zget_filter_info can be used to check
           szip's status.  Attempting to assign szip to a dataset property
@@ -3829,9 +3829,9 @@ New Features
 
     Tools:
     ------
-        - h5repack was added to the tools suite. h5repack regenerates an HDF5 file 
-	  from another HDF5 file, optionally applying HDF5 filters (compression) 
-	  and/or chunking to the copied file. The filters options are read from 
+        - h5repack was added to the tools suite. h5repack regenerates an HDF5 file
+	  from another HDF5 file, optionally applying HDF5 filters (compression)
+	  and/or chunking to the copied file. The filters options are read from
 	  the command line. See /doc/html/Tools.html for more details.
 	  PVN - 2004/9/13
 
@@ -3843,7 +3843,7 @@ New Features
 	   5) Print array indices with the data (the default).
 	  These options are all switch controlled. See /doc/html/Tools.html for more details.
 	  PVN - 2004/9/13
-	      
+
 
     F90 API:
     --------
@@ -3853,7 +3853,7 @@ New Features
                 h5premove_filter_f
                 h5zget_filter_info_f
                                          EIP 2004/9/21
- 
+
         - added new h5fget_name_f and h5fget_filesize_f subroutines
                                          EIP 2004/07/08
 
@@ -3872,7 +3872,7 @@ Support for new platforms, languages and compilers.
         - Added PGI Fortran support for Linux64 (x86_64) systems
                             EIP - 2004/08/19
         - Absoft compiler f95 v9.0 is supported on Linux 2.4 32bit
-                            EIP - 2004/07/29 
+                            EIP - 2004/07/29
         - HDF5 Fortran APIs are supported on Mac OSX with IBM XL Fortran
           compiler version 8.1. This is a default compiler.
         - HDF5 Fortran APIs are supported on MAC OSX with Absoft F95 compiler
@@ -3893,9 +3893,9 @@ Bug Fixes since HDF5-1.6.2 release
         - Corrected error where dataset region references were written in an
           incorrect way on Cray machines.  PVN & QAK - 2004/09/13
         - The H5Tget_native_type now determines the native type for integers
-          based on the precision. This is to avoid cases of wrongly converting        
+          based on the precision. This is to avoid cases of wrongly converting
           an int to a short in machines that have a short of 8 bytes but with
-	  32bit precision (e.g Cray SV1). PVN - 2004/09/07 
+	  32bit precision (e.g Cray SV1). PVN - 2004/09/07
         - Changed H5Dread() to not overwrite data in an application's buffer
           with garbage when accessing a chunked dataset with an undefined fill
           value and an unwritten chunk is uncountered.  QAK - 2004/08/25
@@ -3938,7 +3938,7 @@ Bug Fixes since HDF5-1.6.2 release
           Fixed.  SLU - 2004/06/11
         - Fixed potential file corruption bug when a block of metadata could
           overlap the end of the internal metadata accumulator buffer and
-          the buffer would be extended correctly, but would incorrectly 
+          the buffer would be extended correctly, but would incorrectly
           change it's starting address.  QAK - 2004/06/09
         - Opaque datatype with no tag failed for some operations.  Fixed.
           SLU - 2004/6/3
@@ -3961,33 +3961,33 @@ Bug Fixes since HDF5-1.6.2 release
     -----
         - On SGI h5dump displayed only part of the data due to the bug
           in the system printf; fixed.
-                                             EIP - 2004/09/21 
-    Documentation 
-    ------------- 
-        - Several descriptive errors have been fixed throughout the 
+                                             EIP - 2004/09/21
+    Documentation
+    -------------
+        - Several descriptive errors have been fixed throughout the
           documentation, particularly in the reference manual (RM).
-          A selection particularly worthy of note would be these: 
+          A selection particularly worthy of note would be these:
         - The H5Pset_szip description in the RM has been expanded and
           corrected to facilitate use of SZIP compression.
         - A note has been added to the H5Dcreate description that an
-          unexplained failure is likely to be due to a property list error 
+          unexplained failure is likely to be due to a property list error
           that is detected only at the time of dataset creation.
         -
         FMB - 2004/09/21
 
     F90 API
     -------
-    
+
     Fortran functions h5dwrite/read_f and h5awrite/read_f do not
     accept dims parameter of INTEGER type anymore. Code was removed.
                                                     2004/04/15
     C++ API
     -------
-	- H5::Exception's and its subclasses' constructors that were 
+	- H5::Exception's and its subclasses' constructors that were
 	  overloaded to take char pointers are removed and constructors
-	  that passed in reference of 'string' are changed to pass 
+	  that passed in reference of 'string' are changed to pass
 	  by value.  In addition, the default value of the data member
-	  H5::Exception::detailMessage is changed from 0/NULL to 
+	  H5::Exception::detailMessage is changed from 0/NULL to
 	  DEFAULT_MSG ("No detailed information provided".)
 	- Prototype for DSetCreatPropList::setLayout is changed: 1st parameter
           is removed because it was there only by mistake.
@@ -3998,35 +3998,35 @@ Documentation
     HDF5 Library documentation
     --------------------------
         - HDF5 C++ API Reference Manual
-          This document has been added to the HDF5 document set.  
+          This document has been added to the HDF5 document set.
           The predecessor document, "HDF5 C++ Interfaces," has been removed.
         - HDF5 C++ API Design Specification
-          A first draft of this document has been added to the HDF5 document 
-          set.  The draft has been posted on the HDF5 website and a link 
-          has been added to the HDF5 documents index (index.html at the top 
+          A first draft of this document has been added to the HDF5 document
+          set.  The draft has been posted on the HDF5 website and a link
+          has been added to the HDF5 documents index (index.html at the top
           level of the document set).
         - Parallel HDF5
           In prior releases, the HDF5 document set included two parallel
-          HDF5 documents.  Those documents have been deleted and the 
-          HDF5 documents index (index.html) now links to a "Parallel HDF5" 
+          HDF5 documents.  Those documents have been deleted and the
+          HDF5 documents index (index.html) now links to a "Parallel HDF5"
           page on the HDF5 website (http://hdf.ncsa.uiuc.edu/HDF5/PHDF5/).
         - HDF5 High Level APIs
-          Links to the HDF5 High Level APIs and to the HDF5 High Level 
+          Links to the HDF5 High Level APIs and to the HDF5 High Level
           Reference Manual have been added to the HDF5 documents index
           (index.html).
         - HDF5 Reference Manual
-          Tools: h5repack -- A description of the new h5repack tool has been 
+          Tools: h5repack -- A description of the new h5repack tool has been
               added to the Tools page.
           Tools: h5dump -- Several new options have been added to h5dump.
           New functions -- All new functions have been added to the RM.
           API changes -- Relevant function descriptions have been updated in
-              instances where programming interfaces have changed. 
+              instances where programming interfaces have changed.
         FMB - 2004/09/21
 
     Windows installation documentation
     ----------------------------------
-        -  INSTALL_Windows.txt has been enhanced to include instructions building 
-           HDF5 with FORTRAN and C++. 
+        -  INSTALL_Windows.txt has been enhanced to include instructions building
+           HDF5 with FORTRAN and C++.
         -  Two optional installation documents have been added. They are
            INSTALL_Windows_Short.txt and INSTALL_Windows_From_Command_Line.txt.
            INSTALL_Windows_Short.txt is supposed to help general users who
@@ -4036,7 +4036,7 @@ Documentation
         -  INSTALL_Windows_withcpp.txt and INSTALL_Windows_withF90.txt became
            obsolete. Files are deleted from the release_docs directory.
         KY 2004/09/16, EIP 2004/9/21
-        
+
 
 
 Platforms Tested
@@ -4065,7 +4065,7 @@ Platforms Tested
                                   Cray Fortran Version 3.6.0.3.1
     FreeBSD 4.9                   gcc 2.95.4
                                   g++ 2.95.4
-    HP-UX B.11.00                 HP C  HP92453-01 A.11.01.20 
+    HP-UX B.11.00                 HP C  HP92453-01 A.11.01.20
                                   HP F90 v2.4
                                   HP ANSI C++ B3910B A.03.13
                                   MPIch 1.2.4
@@ -4092,20 +4092,20 @@ Platforms Tested
     Linux 2.4.19-SMP  x86_64      gcc (GCC) 3.2.2 (SuSE Linux)
                                   g++ 3.2.2
     Linux 2.6.4-52smp x86_64      gcc 3.3.3 (SuSE Linux 9.1 AMD64))
-                                  PGI 5.2-1 C and F90 
+                                  PGI 5.2-1 C and F90
 
-    Linux 2.4.21-sgi Altix 
+    Linux 2.4.21-sgi Altix
           SMP ia64                Intel(R) C++ Version 8.0
                                   Intel(R) Fortran Itanium(R) Version 8.0
                                   SGI MPI
-    OSF1 V5.1                     Compaq C V6.5-303 
+    OSF1 V5.1                     Compaq C V6.5-303
                                   HP Fortran V5.5A-3548
-				  Compaq C++ V6.5-040  
+				  Compaq C++ V6.5-040
 				  MPI_64bit_R13
     SunOS 5.7(32 and 64 bit)      WorkShop Compilers 5.0 98/12/15 C 5.0
-     (Solaris 2.7)                WorkShop Compilers 5.0 98/12/15 C++ 5.0 
-                                  WorkShop Compilers 5.0 98/10/25 
-                                  FORTRAN 90 2.0 Patch 107356-04 
+     (Solaris 2.7)                WorkShop Compilers 5.0 98/12/15 C++ 5.0
+                                  WorkShop Compilers 5.0 98/10/25
+                                  FORTRAN 90 2.0 Patch 107356-04
     SunOS 5.8(32 and 64 bit)      Sun WorkShop 6 update 2 C 5.3
      (Solaris 2.8)                Sun WorkShop 6 update 2 Fortran 90
                                   Sun WorkShop 6 update 2 C++ 5.3
@@ -4118,7 +4118,7 @@ Platforms Tested
     Xeon Linux 2.4.20-31.9smp_perfctr_lustre
 	                          Intel(R) C++ Version 8.0
                                   Intel(R) Fortran Compiler Version 8.0
-                                  
+
     IA-64 Linux 2.4.16 ia64       gcc version 3.0.4
                                   Intel(R) C++ Version 7.1
                                   Intel(R) Fortran Compiler Version 7.1
@@ -4138,11 +4138,11 @@ Platforms Tested
                                   DEC Visual Fortran 6.0
 
     MAC OS X                      Darwin 7.5
-                                  gcc and g++ Apple Computer, Inc. GCC 
+                                  gcc and g++ Apple Computer, Inc. GCC
                                   version 1175, based on gcc version 3.3.2
-                                  IBM XL Fortran version 8.1 
+                                  IBM XL Fortran version 8.1
                                   Absoft Fortran compiler v8.2
-                                  
+
 
 
 Supported Configuration Features Summary
@@ -4155,7 +4155,7 @@ Key:   y = tested and supported
        ( ) = footnote appears below second table
 
 Platform                             C        F90    F90      C++  zlib  SZIP
-                                     parallel        parallel      
+                                     parallel        parallel
 Solaris2.7 64-bit                    y (1)    y      y (1)    y    y     y
 Solaris2.7 32-bit                    y (1)    y      y (1)    y    y     y
 Solaris2.8 64-bit                    y (1)    y      y (1)    y    y     y
@@ -4187,8 +4187,8 @@ Linux 2.4 SuSE ia64 C   Intel (3,8)  y        y      y        y    y     y
 Linux 2.4 SGI Altix ia64 Intel (3)   y        y      y        y    y     y
 
 
-Platform                             Shared         static-  Thread-  STREAM- 
-                                     libraries (4)  exec     safe     VFD    
+Platform                             Shared         static-  Thread-  STREAM-
+                                     libraries (4)  exec     safe     VFD
 Solaris2.7 64-bit                    y              x        y        y
 Solaris2.7 32-bit                    y              x        y        y
 Solaris2.8 64-bit                    y              x        y        y
@@ -4221,19 +4221,19 @@ Linux 2.4 SGI Altix ia64 Intel (3)   y              y        n        y
 
 
 
-Compiler versions for each platform are listed in the "Platforms Tested" 
-table found elsewhere in this file (RELEASE.txt).  Unless otherwise noted, 
+Compiler versions for each platform are listed in the "Platforms Tested"
+table found elsewhere in this file (RELEASE.txt).  Unless otherwise noted,
 compilers used are the system compilers.
 
 Footnotes:  (1) Using mpich 1.2.4
             (2) Using mpt and mpich 1.2.4
-            (3) Linux 2.4 with GNU, Intel, and PGI compilers, as indicated  
+            (3) Linux 2.4 with GNU, Intel, and PGI compilers, as indicated
                 W or C indicates workstation or cluster, respectively
-            (4) Shared libraries are provided only for the C library, 
+            (4) Shared libraries are provided only for the C library,
                 except on Windows where they are provided for C and C++
             (5) Using mpt
             (6) Intel 7.1 compilers in Visual Studio 6.0 environment
-            (7) Linux 2.4.20-31.9.  Xeon cluster with smp_perfctr_lustre 
+            (7) Linux 2.4.20-31.9.  Xeon cluster with smp_perfctr_lustre
                 and Intel compilers
             (8) Linux 2.4.21, SuSE_128.befl.  Ia64 cluster with Intel compilers
             (9) DEC Visual Fortran 6.0 and Intel 7.1
@@ -4249,14 +4249,14 @@ Known Problems
 ==============
 * h5fc and h5c++ compilation scripts have a bug: object files (*.o) cannot be
   created when source code is compiled using h5fc or h5c++. We will provide
-  a fix. Please check ftp://ftp.ncsa.uiuc.edu/HDF/HDF5/current/src/patches/ 
+  a fix. Please check ftp://ftp.ncsa.uiuc.edu/HDF/HDF5/current/src/patches/
   for the patches.
 
 * Fortran subroutine h5pget_driver_f doesn't return a correct driver information.
 
 * There are two h5dump xml tests(h5dump --xml thlink.h5 and h5dump --xml tmany.h5)
   failed on windows xp with .NET for debug and debug dll. Release and Release
-  dll work fine. 
+  dll work fine.
 
 * The h5dump tests may fail to match the expected output on some platforms
   (e.g. parallel jobs, Windows) where the error messages directed to
@@ -4276,7 +4276,7 @@ Known Problems
   The --enable-static-exec configure flag also fails to correctly compile
   on IBM SP2 platform for the serial mode. The parallel mode works fine
   with this option.
-  
+
   It is suggested that you don't use this option on these platforms
   during configuration.
 
@@ -4295,7 +4295,7 @@ Known Problems
       the different precision in the values displayed and h5ls appears to
       be dumping floating-point numbers correctly.
 
-* Before building HDF5 F90 Library from source on Crays 
+* Before building HDF5 F90 Library from source on Crays
   replace H5Aff.f90, H5Dff.f90 and H5Pff.f90 files in the fortran/src
   subdirectory in the top level directory with the Cray-specific files
   from the site:
@@ -4303,7 +4303,7 @@ Known Problems
 
 * On some platforms that use Intel and Absoft compilers to build HDF5 fortran library,
   compilation may fail for fortranlib_test.f90, fflush1.f90 and fflush2.f90
-  complaining about exit subroutine. Comment out the line 
+  complaining about exit subroutine. Comment out the line
   IF (total_error .ne. 0) CALL exit (total_error)
 
 * On IA32 and IA64 systems, if you use a compiler other than GCC (such as
@@ -4411,7 +4411,7 @@ The HDF5 documentation can be found on the NCSA ftp server
      /HDF/HDF5/docs/
 
 For more information look at the HDF5 home page at:
-   
+
     http://hdf.ncsa.uiuc.edu/HDF5/
 
 If you have any questions or comments, please send them to:
@@ -4469,8 +4469,8 @@ New Features
 Support for new platforms, languages and compilers.
 =======================================
         - HDF5 Fortran APIs are supported on MAC OSX with IBM XL Fortran compiler
-          version 8.1 Beta  
-          Use --disbale-shared --enable-static flags with configure when 
+          version 8.1 Beta
+          Use --disbale-shared --enable-static flags with configure when
           building HDF5 Fortran Library on MAC OSX.
         - C and C++ Libraries are available for Linux64 RH8
         - C, C++ and Fortran sequential Libraries, and C and Fortran parallel
@@ -4551,8 +4551,8 @@ Bug Fixes since HDF5-1.6.1 release
 	  test command. (The complain did not hinder the h5redploy to proceed
 	  correctly.) AKC - 2003/11/03
 
-    Documentation 
-    ------------- 
+    Documentation
+    -------------
 
 
 Documentation
@@ -4580,7 +4580,7 @@ Platforms Tested
                                   Cray Fortran Version 3.4.0.0
     FreeBSD 4.9                   gcc 2.95.4
                                   g++ 2.95.4
-    HP-UX B.11.00                 HP C  HP92453-01 A.11.01.20 
+    HP-UX B.11.00                 HP C  HP92453-01 A.11.01.20
                                   HP F90 v2.4
                                   HP ANSI C++ B3910B A.03.13
                                   MPIch 1.2.4
@@ -4601,7 +4601,7 @@ Platforms Tested
     Linux 2.4.19-SMP  x86_64      gcc (GCC) 3.2.2 (SuSE Linux)
                                   g++ 3.2.2
 
-    Linux 2.4.21-sgi Altix 
+    Linux 2.4.21-sgi Altix
           SMP ia64                Intel(R) C++ Version 7.1
                                   Intel(R) Fortran Itanium(R) Version 7.1
                                   SGI MPI
@@ -4612,9 +4612,9 @@ Platforms Tested
 				  Compaq C++ V6.5-030
 				  MPI_64bit_R13
     SunOS 5.7(32 and 64 bit)      WorkShop Compilers 5.0 98/12/15 C 5.0
-     (Solaris 2.7)                WorkShop Compilers 5.0 98/12/15 C++ 5.0 
-                                  WorkShop Compilers 5.0 98/10/25 
-                                  FORTRAN 90 2.0 Patch 107356-04 
+     (Solaris 2.7)                WorkShop Compilers 5.0 98/12/15 C++ 5.0
+                                  WorkShop Compilers 5.0 98/10/25
+                                  FORTRAN 90 2.0 Patch 107356-04
     SunOS 5.8(32 and 64 bit)      Sun WorkShop 6 update 2 C 5.3
      (Solaris 2.8)                Sun WorkShop 6 update 2 Fortran 90
                                   Sun WorkShop 6 update 2 C++ 5.3
@@ -4623,7 +4623,7 @@ Platforms Tested
     IA-32 Linux 2.4.18            gcc 2.96
                                   Intel(R) C++ Version 7.0
                                   Intel(R) Fortran Compiler Version 7.0
-                                  
+
     IA-64 Linux 2.4.16 ia64       gcc version 3.0.4
                                   Intel(R) C++ Version 7.1
                                   Intel(R) Fortran Compiler Version 7.1
@@ -4639,10 +4639,10 @@ Platforms Tested
 				  Code Warrior 8.0
     Windows XP                    MSVC++.NET
     MAC OS X                      Darwin 7.2
-                                  gcc and g++ Apple Computer, Inc. GCC 
+                                  gcc and g++ Apple Computer, Inc. GCC
                                   version 1175, based on gcc version 3.3.2
                                   IBM XL Fortran version 8.1 Beta
-                                  
+
 
 
 Supported Configuration Features Summary
@@ -4686,10 +4686,10 @@ RedHat 7.1 ia64 C Intel (3) y   n        y      n        y    n             y
 RedHat 8 & SuSe x86_64      y   n        n      n        y    n             y
     gcc (3)
 Linux 2.4 SGI Altix ia64    y   n        y      n        y    y             y
-    Intel (3) 
+    Intel (3)
 
 
-Platform                    static-  Thread-  SZIP  GASS  STREAM-  High-  H4/H5 
+Platform                    static-  Thread-  SZIP  GASS  STREAM-  High-  H4/H5
                             exec     safe                 VFD      level  tools
                                                                    APIs   (6)
 Solaris2.7 64-bit           x        y        y     n     y        y      n
@@ -4722,21 +4722,21 @@ RedHat 7.1 ia64 C Intel (3) y        n        y     n     y        y      y
 RedHat 8 & SuSe x86_64      y        n        y     n     y        y      y
     gcc (3)
 Linux 2.4 SGI Altix ia64    y        n        y     n     y        y      y
-    Intel (3) 
+    Intel (3)
 
 
-Compiler versions for each platform are listed in the "Platforms Tested" 
-table found elsewhere in this file (RELEASE.txt).  Unless otherwise noted, 
+Compiler versions for each platform are listed in the "Platforms Tested"
+table found elsewhere in this file (RELEASE.txt).  Unless otherwise noted,
 compilers used are the system compilers.
 
 Footnotes:  (1) Using mpich 1.2.4.
             (2) Using mpt and mpich 1.2.4.
-            (3) Linux 2.4 with GNU, Intel, and PGI compilers, as indicated.  
+            (3) Linux 2.4 with GNU, Intel, and PGI compilers, as indicated.
                 W or C indicates workstation or cluster, respectively.
-            (4) Shared libraries are provided only for the C library, 
+            (4) Shared libraries are provided only for the C library,
                 except on Windows where they are provided for C and C++.
             (5) Using mpt.
-            (6) Includes the H4toH5 Library and the h4toh5 and h5toh4 
+            (6) Includes the H4toH5 Library and the h4toh5 and h5toh4
                 utilities.
 
 
@@ -4746,7 +4746,7 @@ Known Problems
 
 * There are two h5dump xml tests(h5dump --xml thlink.h5 and h5dump --xml tmany.h5)
   failed on windows xp with .NET for debug and debug dll. Release and Release
-  dll work fine. 
+  dll work fine.
 
 * The h5dump tests may fail to match the expected output on some platforms
   (e.g. parallel jobs, Windows) where the error messages directed to
@@ -4766,7 +4766,7 @@ Known Problems
   The --enable-static-exec configure flag also fails to correctly compile
   on IBM SP2 platform for the serial mode. The parallel mode works fine
   with this option.
-  
+
   It is suggested that you don't use this option on these platforms
   during configuration.
 
@@ -4786,7 +4786,7 @@ Known Problems
       the different precision in the values displayed and h5ls appears to
       be dumping floating-point numbers correctly.
 
-* Before building HDF5 F90 Library from source on Crays 
+* Before building HDF5 F90 Library from source on Crays
   replace H5Aff.f90, H5Dff.f90 and H5Pff.f90 files in the fortran/src
   subdirectory in the top level directory with the Cray-specific files
   from the site:
@@ -4794,7 +4794,7 @@ Known Problems
 
 * On some platforms that use Intel compilers to build HDF5 fortran library,
   compilation may fail for fortranlib_test.f90, fflush1.f90 and fflush2.f90
-  complaining about exit subroutine. Comment out the line 
+  complaining about exit subroutine. Comment out the line
   IF (total_error .ne. 0) CALL exit (total_error)
 
 * On IA32 and IA64 systems, if you use a compiler other than GCC (such as
@@ -4848,7 +4848,7 @@ The HDF5 documentation can be found on the NCSA ftp server
      /HDF/HDF5/docs/
 
 For more information look at the HDF5 home page at:
-   
+
     http://hdf.ncsa.uiuc.edu/HDF5/
 
 If you have any questions or comments, please send them to:
@@ -4921,7 +4921,7 @@ New Features
 Support for new platforms, languages and compilers.
 =======================================
          - gcc 3.3.1 is supported on Linux.
-  
+
 
 Bug Fixes since HDF5-1.6.0 release
 ==================================
@@ -5008,20 +5008,20 @@ Bug Fixes since HDF5-1.6.0 release
         - Switched away from tools using internal "fixtype" function(s) to use
             H5Tget_native_type() internally.  QAK - 2003/08/25
 
-    Documentation 
-    ------------- 
-        - Added two missing Fortran APIs (h5pget_fapl_mpiposix_f and 
+    Documentation
+    -------------
+        - Added two missing Fortran APIs (h5pget_fapl_mpiposix_f and
             h5pset_fapl_mpiposix_f) to the reference manual.
             FMB - 2003/10/15
-        - Corrected the reference manual descriptions of H5open/h5open_f and 
-            H5close/h5close_f to indicate that these calls are required in 
+        - Corrected the reference manual descriptions of H5open/h5open_f and
+            H5close/h5close_f to indicate that these calls are required in
             Fortran90 applications.   FMB - 2003/10/15
 
 
 Documentation
 =============
 
-    Fortran90 APIs are being integrated into the main body of the 
+    Fortran90 APIs are being integrated into the main body of the
     HDF5 Reference Manual (RM).  This process is complete in all RM sections
     except H5P.
 
@@ -5050,7 +5050,7 @@ Platforms Tested
                                   Cray Fortran Version 3.4.0.3
     FreeBSD 4.9                   gcc 2.95.4
                                   g++ 2.95.4
-    HP-UX B.11.00                 HP C  HP92453-01 A.11.01.20 
+    HP-UX B.11.00                 HP C  HP92453-01 A.11.01.20
                                   HP F90 v2.4
                                   HP ANSI C++ B3910B A.03.13
                                   HP MPI 01.07.00.00
@@ -5072,9 +5072,9 @@ Platforms Tested
 				  MPI_64bit_R5
                                   g++ version 3.0 for C++
     SunOS 5.7(32 and 64 bit)      WorkShop Compilers 5.0 98/12/15 C 5.0
-     (Solaris 2.7)                WorkShop Compilers 5.0 98/12/15 C++ 5.0 
-                                  WorkShop Compilers 5.0 98/10/25 
-                                  FORTRAN 90 2.0 Patch 107356-04 
+     (Solaris 2.7)                WorkShop Compilers 5.0 98/12/15 C++ 5.0
+                                  WorkShop Compilers 5.0 98/10/25
+                                  FORTRAN 90 2.0 Patch 107356-04
     SunOS 5.8(32 and 64 bit)      Sun WorkShop 6 update 2 C 5.3
      (Solaris 2.8)                Sun WorkShop 6 update 2 Fortran 90
                                   Sun WorkShop 6 update 2 C++ 5.3
@@ -5083,7 +5083,7 @@ Platforms Tested
     IA-32 Linux 2.4.9             gcc 2.96
                                   Intel(R) C++ Version 7.0
                                   Intel(R) Fortran Compiler Version 7.0
-                                  
+
     IA-64 Linux 2.4.16 ia64       gcc version 2.96 20000731
                                   Intel(R) C++ Version 7.0
                                   Intel(R) Fortran Compiler Version 7.0
@@ -5093,9 +5093,9 @@ Platforms Tested
 				  Code Warrior 8.0
     Windows XP                    MSVC++.NET
     MAC OS X                      Darwin 6.8
-                                  gcc and g++ Apple Computer, Inc. GCC 
+                                  gcc and g++ Apple Computer, Inc. GCC
                                   version 1175, based on gcc version 3.1
-                                  
+
 
 
 Supported Configuration Features Summary
@@ -5114,7 +5114,7 @@ Solaris2.7 64-bit     y   y (1)     y        y (1)     y    y             y
 Solaris2.7 32-bit     y   y (1)     y        y (1)     y    y             y
 Solaris2.8 64-bit     y   y (1)     y        y (1)     y    y             y
 Solaris2.8 32-bit     y   y         y        y (1)     y    y             y
-IRIX6.5               y   y (1)     n        n         n    y             y 
+IRIX6.5               y   y (1)     n        n         n    y             y
 IRIX64_6.5 64-bit     y   y (2)     y        y         y    y             y
 IRIX64_6.5 32-bit     y   y (2)     n        n         n    y             y
 HPUX11.00             y   y (1)     y        y         y    y             y
@@ -5141,7 +5141,7 @@ Linux 2.4 IA64 Intel  y   n         y        n         y    n             y
 
 ASCII Table 2 -- for RELEASE.txt
 
-Platform              static- Thread- SZIP GASS STREAM-  High-level  H4/H5 
+Platform              static- Thread- SZIP GASS STREAM-  High-level  H4/H5
                       exec    safe              VFD      APIs        tools (7)
 Solaris2.7 64-bit     x       y       y    n    y        y           n
 Solaris2.7 32-bit     x       y       y    n    y        y           y
@@ -5174,12 +5174,12 @@ Linux 2.4 IA64 Intel  y       n       y    n    y        y           y
     Notes: (1) Using mpich 1.2.4.
            (2) Using mpt and mpich 1.2.4.
            (3) Linux 2.4 with GNU, Intel, and PGI compilers, respectively.
-           (4) Shared libraries are provided only for the C library, except 
+           (4) Shared libraries are provided only for the C library, except
                on Windows where they are provided for C and C++.
            (5) Using mpt.
-           (6) Binaries only; source code for this platform is not being 
+           (6) Binaries only; source code for this platform is not being
                released at this time.
-           (7) Includes the H4toH5 Library and the h4toh5 and h5toh4 
+           (7) Includes the H4toH5 Library and the h4toh5 and h5toh4
                utilities.
     Compiler versions for each platform are listed in the preceding
     "Platforms Tested" table.
@@ -5189,10 +5189,10 @@ Linux 2.4 IA64 Intel  y       n       y    n    y        y           y
 Known Problems
 ==============
 * Fortran subroutine h5pget_driver_f doesn't return a correct driver information.
-  The fix willl be available in the 1.6.2 release. 
+  The fix willl be available in the 1.6.2 release.
 * There are two h5dump xml tests(h5dump --xml thlink.h5 and h5dump --xml tmany.h5)
   failed on windows xp with .NET for debug and debug dll. Release and Release
-  dll work fine. 
+  dll work fine.
 
 * The h5dump tests may fail to match the expected output on some platforms
   (e.g. parallel jobs, Windows) where the error messages directed to
@@ -5212,7 +5212,7 @@ Known Problems
   The --enable-static-exec configure flag also fails to correctly compile
   on IBM SP2 platform for the serial mode. The parallel mode works fine
   with this option.
-  
+
   It is suggested that you don't use this option on these platforms
   during configuration.
 
@@ -5221,7 +5221,7 @@ Known Problems
   able to handle the `long long' datatype with the warning:
 
         warning: ANSI C does not support `long long'
-  
+
   This warning is innocuous and can be safely ignored.
 
 
@@ -5241,14 +5241,14 @@ Known Problems
       the different precision in the values displayed and h5ls appears to
       be dumping floating-point numbers correctly.
 
-* Before building HDF5 F90 Library from source on Crays 
+* Before building HDF5 F90 Library from source on Crays
   replace H5Aff.f90, H5Dff.f90 and H5Pff.f90 files in the fortran/src
   subdirectory in the top level directory with the Cray-specific files
   from the site:
 
 * On some platforms that use Intel compilers to build HDF5 fortran library,
   compilation may fail for fortranlib_test.f90, fflush1.f90 and fflush2.f90
-  complaining about exit subroutine. Comment out the line 
+  complaining about exit subroutine. Comment out the line
   IF (total_error .ne. 0) CALL exit (total_error)
 
   ftp://hdf.ncsa.uiuc.edu/pub/outgoing/hdf5/hdf5-1.6.0/F90_source_for_Crays
@@ -5291,7 +5291,7 @@ The HDF5 documentation can be found on the NCSA ftp server
      /HDF/HDF5/docs/
 
 For more information look at the HDF5 home page at:
-   
+
     http://hdf.ncsa.uiuc.edu/HDF5/
 
 If you have any questions or comments, please send them to:
@@ -5336,8 +5336,8 @@ Library:
     For more information see
     http://hdf.ncsa.uiuc.edu/HDF5/doc_resource/SZIP/index.html
     http://hdf.ncsa.uiuc.edu/HDF5/doc/ADGuide.html
-    http://hdf.ncsa.uiuc.edu/HDF5/doc/ADGuide/Changes.html 
-    
+    http://hdf.ncsa.uiuc.edu/HDF5/doc/ADGuide/Changes.html
+
     Complete list of changes:
 
     * Changed dataset modification time to _not_ be updated when raw data is
@@ -5365,16 +5365,16 @@ Library:
       I/O filters: H5Pmodify_filter, H5Pget_filter_by_id and
       H5Pall_filters_avail.  Also changed H5Zregister to use new method
       of registering filters with library.  QAK - 2003/04/08
-    * The first version of szip compression support were implemented. 
+    * The first version of szip compression support were implemented.
       User should have static szlib library installed. Using function
       H5Pset_szip to pass the szip parameters to the HDF5 library.
       More detailed decription of the process will be followed.
       KY-2003/04/01
-    * Added Fletcher32 checksum as a filter in pipeline.  It only works in 
+    * Added Fletcher32 checksum as a filter in pipeline.  It only works in
       chunked dataset.  SLU - 2003/2/11
     * MPICH/MPE instrumentation feature added.  Use --with-mpe[=DIR] to configure
       it.  AKC - 2003/1/3
-    * New functions H5Gget_num_objs, H5Gget_objname_by_idx and H5Gget_objtype_by_idx 
+    * New functions H5Gget_num_objs, H5Gget_objname_by_idx and H5Gget_objtype_by_idx
       are added to the library.  SLU - 2002/11/25
     * H5Dget_offset is added to return the offset of a dataset's data relative
       to the beginning of the file.  SLU - 2002/11/7
@@ -5399,7 +5399,7 @@ Library:
       H5D_SPACE_ALLOC_LATE for H5Dset_space_time().  This allows chunked
       datasets to be incrementally allocated as in the 1.4.x branch.
       QAK - 2002/08/27
-    * Compact dataset is added to the library.  The data will be stored in 
+    * Compact dataset is added to the library.  The data will be stored in
       the header message of dataset layout.  Space allocation time has to be
       EARLY.  No hyperslab is supported for parallel collective write.  There
       is no API changes except activating H5Pset_layout and H5Pget_layout for
@@ -5413,9 +5413,9 @@ Library:
       This can improve parallel I/O performance for chunked
       datasets.  QAK - 2002/05/17
     * New functions H5Glink2 and H5Gmove2 were added to allow link and move to
-      be in different locations in the same file.  The old functions H5Glink 
-      and H5Gmove remain valid.  SLU - 2002/04/26 
-    * Fill-value's behaviors for contiguous dataset have been redefined.  
+      be in different locations in the same file.  The old functions H5Glink
+      and H5Gmove remain valid.  SLU - 2002/04/26
+    * Fill-value's behaviors for contiguous dataset have been redefined.
       Basicly, dataset won't allocate space until it's necessary.  Full details
       are available at http://hdf.ncsa.uiuc.edu/RFC/Fill_Value, at this moment.
       SLU - 2002/04/11
@@ -5436,14 +5436,14 @@ Library:
       in order to correctly handle dataset region references.  Moved
       H5Rget_object_type() to be only compiled into the library when v1.4
       compatibility is enabled.
-    * Added a new file access property, file close degree, to control file 
+    * Added a new file access property, file close degree, to control file
       close behavior.  It has four values, H5F_CLOSE_WEAK, H5F_CLOSE_SEMI,
-      H5F_CLOSE_STRONG, and H5F_CLOSE_DEFAULT.  Two correspont functions 
-      H5Pset_fclose_degree and H5Pget_fclose_degree are also provided.  Two 
+      H5F_CLOSE_STRONG, and H5F_CLOSE_DEFAULT.  Two correspont functions
+      H5Pset_fclose_degree and H5Pget_fclose_degree are also provided.  Two
       new functions H5Fget_obj_count and H5Fget_obj_ids are offerted to assist
-      this new feature.  For full details, please refer to the reference 
-      manual under the description of H5Fcreate, H5Fopen, H5Fclose and the 
-      functions mentioned above. 
+      this new feature.  For full details, please refer to the reference
+      manual under the description of H5Fcreate, H5Fopen, H5Fclose and the
+      functions mentioned above.
     * Removed H5P(get|set)_hyper_cache API function, since the property is no
       longer used.
     * Improved performance of non-contiguous hyperslabs (built up with
@@ -5481,19 +5481,19 @@ Tools:
         QAK - 2003/06/06
     * h5diff to compare two HDF5 files was added
     * h5import to import ascii and binary data to an HDF5 file was added.
-      Old h5import tool in the tools/misc directory was renamed to 
-      h5createU8 to reflect its purpose. h5createU8 will be deleted in 
-      1.6.1 release. 
+      Old h5import tool in the tools/misc directory was renamed to
+      h5createU8 to reflect its purpose. h5createU8 will be deleted in
+      1.6.1 release.
     * Two new scripts h5fc and h5c++ were added to compile F90 and C++
       HDF5 applications.
 
 Support for new platforms, languages and compilers.
 =======================================
     * Added C++ API support on HPUX11.00.  BMR - 2003/03/19
-    * Absoft compiler is supported for Fortran HDF5 Library. 
+    * Absoft compiler is supported for Fortran HDF5 Library.
       When building with Absoft compiler, add -DH5_ABSOFT to
       C compilation flags to get correct names of C functions
-      called by Fortran APIs. 
+      called by Fortran APIs.
 
 
 Bug Fixes since HDF5-1.4.0 release
@@ -5527,7 +5527,7 @@ Library
       for floating point data). This adds a new API function: H5Pset_shuffle.
       KY - 2002/11/13
     * Allow scalar dataspaces to be used for parallel I/O.  QAK - 2002/11/05
-    * New functions H5Gget_comment(modification), H5Aget_storage_size, 
+    * New functions H5Gget_comment(modification), H5Aget_storage_size,
       H5Arename.  SLU - 2002/10/29
     * Fixed an assertion of H5S_select_iterate that did not account for scalar
       type that has no dimension sizes.   AKC - 2002/10/15
@@ -5536,10 +5536,10 @@ Library
     * Fixed data corruption problem which could occur when fill values were
       written to a contiguously stored dataset in parallel.  QAK - 2002/08/27
     * Fixed VL memory leak when data is overwritten.  The heap objects holding
-      old data are freed.  If the fill value writting time is set to 
+      old data are freed.  If the fill value writting time is set to
       H5D_FILL_TIME_NEVER, the library prohibits user to create VL type dataset.
-      The library free all the heap objects storing VL type if there is nested 
-      VL type(a VL type contains another VL type).  SLU - 2002/07/10 
+      The library free all the heap objects storing VL type if there is nested
+      VL type(a VL type contains another VL type).  SLU - 2002/07/10
     * Tweaked a few API functions to use 'size_t' instead of 'unsigned' or
       'hsize_t', which may cause errors in some cases.
 
@@ -5563,17 +5563,17 @@ Performance
 Tools
 -----
 
-    * Added a -force option to h5redeploy.  AKC - 2003/03/04 
+    * Added a -force option to h5redeploy.  AKC - 2003/03/04
     * The VL string bug(data and datatype cannot be shown) in h5dump is fixed.
       -SLU - 2002/11/18
-    * Fixed segfault if h5dump was invoked with some options but no file 
+    * Fixed segfault if h5dump was invoked with some options but no file
       (e.g., h5dump -H). -AKC, 2002/10/15
     * Fixed so that the "-i" flag works correctly with the h5dumper.
     * Fixed segfault when "-v" flag was used with the h5dumper.
 
 
-Documentation 
-------------- 
+Documentation
+-------------
 
 
 
@@ -5603,7 +5603,7 @@ Platforms Tested
                                   mpt 2.1.0.0
     FreeBSD 4.7                   gcc 2.95.4
                                   g++ 2.95.5
-    HP-UX B.11.00                 HP C  HP92453-01 A.11.01.20 
+    HP-UX B.11.00                 HP C  HP92453-01 A.11.01.20
                                   HP F90 v2.4
                                   HP ANSI C++ B3910B A.03.13
                                   MPIch 1.2.4
@@ -5624,9 +5624,9 @@ Platforms Tested
 				  MPI_64bit_R5
                                   g++ version 3.0 for C++
     SunOS 5.7                     WorkShop Compilers 5.0 98/12/15 C 5.0
-     (Solaris 2.7)                WorkShop Compilers 5.0 98/12/15 C++ 5.0 
-                                  WorkShop Compilers 5.0 98/10/25 
-                                  FORTRAN 90 2.0 Patch 107356-04 
+     (Solaris 2.7)                WorkShop Compilers 5.0 98/12/15 C++ 5.0
+                                  WorkShop Compilers 5.0 98/10/25
+                                  FORTRAN 90 2.0 Patch 107356-04
     SunOS 5.8/32                  Sun WorkShop 6 update 2 C 5.3
      (Solaris 2.8)                Sun WorkShop 6 update 2 Fortran 90
                                   Sun WorkShop 6 update 2 C++ 5.3
@@ -5638,7 +5638,7 @@ Platforms Tested
     IA-32 Linux 2.4.9             gcc 2.96
                                   Intel(R) C++ Version 7.0
                                   Intel(R) Fortran Compiler Version 7.0
-                                  
+
     IA-64 Linux 2.4.16 ia64       gcc version 2.96 20000731
                                   Intel(R) C++ Version 7.0
                                   Intel(R) Fortran Compiler Version 7.0
@@ -5648,9 +5648,9 @@ Platforms Tested
 				  Code Warrior 8.0
     Windows XP                    MSVC++.NET
     MAC OS X                      Darwin 6.5
-                                  gcc and g++ Apple Computer, Inc. GCC 
+                                  gcc and g++ Apple Computer, Inc. GCC
                                   version 1161, based on gcc version 3.1
-                                  
+
 
 
 Supported Configuration Features Summary
@@ -5669,7 +5669,7 @@ Solaris2.7 64-bit     y   y (1)     y        y (1)     y    y             y
 Solaris2.7 32-bit     y   y (1)     y        y (1)     y    y             y
 Solaris2.8 64-bit     y   y (1)     y        y (1)     y    y             y
 Solaris2.8 32-bit     y   y         y        y (1)     y    y             y
-IRIX6.5               y   y (1)     n        n         n    y             y 
+IRIX6.5               y   y (1)     n        n         n    y             y
 IRIX64_6.5 64-bit     y   y (2)     y        y         y    y             y
 IRIX64_6.5 32-bit     y   y (2)     n        n         n    y             y
 HPUX11.00             y   y (1)     y        y         y    y             y
@@ -5696,7 +5696,7 @@ Linux 2.4 IA64 Intel  y   n         y        n         y    n             y
 
 ASCII Table 2 -- for RELEASE.txt
 
-Platform              static- Thread- SZIP GASS STREAM-  High-level  H4/H5 
+Platform              static- Thread- SZIP GASS STREAM-  High-level  H4/H5
                       exec    safe              VFD      APIs        tools (7)
 Solaris2.7 64-bit     x       y       y    n    y        y           n
 Solaris2.7 32-bit     x       y       y    n    y        y           y
@@ -5729,12 +5729,12 @@ Linux 2.4 IA64 Intel  y       n       y    n    y        y           y
     Notes: (1) Using mpich 1.2.4.
            (2) Using mpt and mpich 1.2.4.
            (3) Linux 2.4 with GNU, Intel, and PGI compilers, respectively.
-           (4) Shared libraries are provided only for the C library, except 
+           (4) Shared libraries are provided only for the C library, except
                on Windows where they are provided for C and C++.
            (5) Using mpt.
-           (6) Binaries only; source code for this platform is not being 
+           (6) Binaries only; source code for this platform is not being
                released at this time.
-           (7) Includes the H4toH5 Library and the h4toh5 and h5toh4 
+           (7) Includes the H4toH5 Library and the h4toh5 and h5toh4
                utilities.
     Compiler versions for each platform are listed in the preceding
     "Platforms Tested" table.
@@ -5766,7 +5766,7 @@ Known Problems
   The --enable-static-exec configure flag also fails to correctly compile
   on IBM SP2 platform for the serial mode. The parallel mode works fine
   with this option.
-  
+
   It is suggested that you don't use this option on these platforms
   during configuration.
 
@@ -5775,7 +5775,7 @@ Known Problems
   able to handle the `long long' datatype with the warning:
 
         warning: ANSI C does not support `long long'
-  
+
   This warning is innocuous and can be safely ignored.
 
 
@@ -5795,14 +5795,14 @@ Known Problems
       the different precision in the values displayed and h5ls appears to
       be dumping floating-point numbers correctly.
 
-* Before building HDF5 F90 Library from source on Crays 
+* Before building HDF5 F90 Library from source on Crays
   replace H5Aff.f90, H5Dff.f90 and H5Pff.f90 files in the fortran/src
   subdirectory in the top level directory with the Cray-specific files
   from the site:
 
 * On some platforms that use Intel compilers to build HDF5 fortran library,
   compilation may fail for fortranlib_test.f90, fflush1.f90 and fflush2.f90
-  complaining about exit subroutine. Comment out the line 
+  complaining about exit subroutine. Comment out the line
   IF (total_error .ne. 0) CALL exit (total_error)
 
   ftp://hdf.ncsa.uiuc.edu/pub/outgoing/hdf5/hdf5-1.6.0/F90_source_for_Crays
@@ -5838,7 +5838,7 @@ INTRODUCTION
 
 This document describes the differences between HDF5-1.4.4 and
 HDF5-1.4.5, and contains information on the platforms tested and
-known problems in HDF5-1.4.5. For additional information check the 
+known problems in HDF5-1.4.5. For additional information check the
 HISTORY.txt file in the HDF5 source.
 
 The HDF5 documentation can be found on the NCSA ftp server
@@ -5847,7 +5847,7 @@ The HDF5 documentation can be found on the NCSA ftp server
     /HDF/HDF5/docs/
 
 For more information, see the HDF5 home page at:
-   
+
     http://hdf.ncsa.uiuc.edu/HDF5/
 
 If you have any questions or comments, please send them to:
@@ -5880,7 +5880,7 @@ New Features
   o Library
   =========
     o General
-    --------- 
+    ---------
       * Allow scalar dataspaces to be used for parallel I/O.  QAK - 2002/11/05
       * Added environment variable "HDF5_DISABLE_VERSION_CHECK", which disables
         the version checking between the header files and the library linked
@@ -5903,7 +5903,7 @@ New Features
     ------
       * Several missing fortran APIs have been added to the library:
 
-        h5get_libversion_f        h5tget_member_index_f  h5dget_storage_size_f 
+        h5get_libversion_f        h5tget_member_index_f  h5dget_storage_size_f
         h5check_version_f         h5tvlen_create_f       h5dvlen_get_max_len_f
         h5garbage_collect_f                              h5dwrite_vl_f
         h5dont_atexit_f                                  h5dread_vl_f
@@ -5937,11 +5937,11 @@ New Features
   =========================================
     * C++ API now works on the Origin2000 (IRIX6.5.14.)  BMR - 2002/11/14
 
-  
+
   o Misc.
   =========================================
-    HDF5 1.4.5 works with Portland Group Compilers (pgcc, pgf90 and pgCC 
-    version 4.0-2) on Linux 2.4 
+    HDF5 1.4.5 works with Portland Group Compilers (pgcc, pgf90 and pgCC
+    version 4.0-2) on Linux 2.4
 
 
 Bug Fixes since HDF5-1.4.4 Release
@@ -5955,8 +5955,8 @@ Bug Fixes since HDF5-1.4.4 Release
         QAK - 2003/01/21
     * Added improved error assertion for nil VL strings.  It return error
         stack instead of a simple assertion.  SLU - 2002/12/16
-    * Fixed h5dump bug(cannot dump data and datatype) for VL string. 
-        SLU - 2002/11/18 
+    * Fixed h5dump bug(cannot dump data and datatype) for VL string.
+        SLU - 2002/11/18
     * Fixed error condition where "none" selections were not being handled
         correctly in serial & parallel.  QAK - 2002/10/29
     * Fixed problem where optimized hyperslab routines were incorrectly
@@ -5980,15 +5980,15 @@ Platforms Tested
     AIX 5.1  (32 and 64-bit)      C for AIX Compiler, Version 6
                                   xlf 8.1.0.2
                                   poe 3.2.0.11
-    Cray T3E sn6606 2.0.6.08      Cray Standard C Version 6.6.0.1.3 
-                                  Cray Fortran Version 3.6.0.0.12 
+    Cray T3E sn6606 2.0.6.08      Cray Standard C Version 6.6.0.1.3
+                                  Cray Fortran Version 3.6.0.0.12
     Cray SV1 10.0.1. 0            Cray Standard C Version 6.6.0.1.3
                                   Cray Fortran Version 3.6.0.0.12
     Cray T90IEEE 10.0.1.01u       Cray Standard C Version 6.4.0.2.3
                                   Cray Fortran Version 3.4.0.3
     FreeBSD 4.7                   gcc 2.95.4
                                   g++ 2.95.5
-    HP-UX B.11.00                 HP C  HP92453-01 A.11.01.20 
+    HP-UX B.11.00                 HP C  HP92453-01 A.11.01.20
                                   HP F90 v2.4
     IRIX 6.5                      MIPSpro cc 7.30
     IRIX64 6.5 (64 & n32)         MIPSpro cc 7.3.1.3m
@@ -6003,16 +6003,16 @@ Platforms Tested
                                   Compaq Fortran X5.4A-1684
                                   gcc version 3.0 for C++
     SunOS 5.7                     WorkShop Compilers 5.0 98/12/15 C 5.0
-     (Solaris 2.7)                WorkShop Compilers 5.0 98/12/15 C++ 5.0 
-                                  WorkShop Compilers 5.0 98/10/25 
-                                  FORTRAN 90 2.0 Patch 107356-04 
+     (Solaris 2.7)                WorkShop Compilers 5.0 98/12/15 C++ 5.0
+                                  WorkShop Compilers 5.0 98/10/25
+                                  FORTRAN 90 2.0 Patch 107356-04
     SunOS 5.8/32                  Sun WorkShop 6 update 1 C 5.2 2000/09/11
-     (Solaris 2.8)                Sun WorkShop 6 update 1 Fortran 95 6.1 
+     (Solaris 2.8)                Sun WorkShop 6 update 1 Fortran 95 6.1
                                           Patch 109503-07 2001/08/11
                                   Sun WorkShop 6 update 1 C++ 5.2 Patch
                                         109508-04 2001/07/11
     SunOS 5.8/64                  Sun WorkShop 6 update 1 C 5.2 2000/09/11
-     (Solaris 2.8)                Sun WorkShop 6 update 1 Fortran 95 6.1 
+     (Solaris 2.8)                Sun WorkShop 6 update 1 Fortran 95 6.1
                                           Patch 109503-07 2001/08/11
                                   Sun WorkShop 6 update 1 C++ 5.2 Patch
                                         109508-04 2001/07/11
@@ -6021,7 +6021,7 @@ Platforms Tested
     IA-32 Linux 2.4.9             gcc 2.96
                                   Intel(R) C++ Version 7.0
                                   Intel(R) Fortran Compiler Version 7.0
-                                  
+
     IA-64 Linux 2.4.16 ia64       gcc version 2.96 20000731
                                   Intel(R) C++ Version 7.0
                                   Intel(R) Fortran Compiler Version 7.0
@@ -6030,9 +6030,9 @@ Platforms Tested
     Windows XP                    .NET
     Windows NT4.0                 Code Warrior 6.0
     MAC OS X                      Darwin 6.2
-                                  gcc and g++ Apple Computer, Inc. GCC 
+                                  gcc and g++ Apple Computer, Inc. GCC
                                   version 1161, based on gcc version 3.1
-                                  
+
 
 
 Supported Configuration Features Summary
@@ -6053,7 +6053,7 @@ Supported Configuration Features Summary
     Solaris2.7 32-bit    y   y (1)     y    y (1)     y    y              y
     Solaris2.8 64-bit    y   n         y    y (1)     y    y              y
     Solaris2.8 32-bit    y   n         y    y (1)     y    y              y
-    IRIX6.5              y   y (1)     n    n         n    y              y 
+    IRIX6.5              y   y (1)     n    n         n    y              y
     IRIX64_6.5 64-bit    y   y (2)     y    y         y    y              y
     IRIX64_6.5 32-bit    y   y (2)     n    n         n    y              y
     HPUX11.00            y   y (1)     y    n         n    y              y
@@ -6075,7 +6075,7 @@ Supported Configuration Features Summary
     Linux 2.4 PGI   (3)  y   n         y    n         y    n              y
     Linux 2.4 IA32       y   n         y    n         n    n              y
     Linux 2.4 IA64       y   n         y    n         n    n              y
-    
+
 
     Platform             static-  Thread-  SRB  GASS  STREAM-
                          exec     safe                VFD
@@ -6111,23 +6111,23 @@ Supported Configuration Features Summary
            (2) Using mpt and mpich 1.2.4.
            (3) Linux 2.4 with GNU, Intel, and PGI compilers.
            (4) No HDF4-related tools.
-           (5) Shared libraries are provided only for the C library, 
+           (5) Shared libraries are provided only for the C library,
                except on Windows where they are provided for all languages.
            (6) Debug mode only.
-           (7) Binaries only; source code for this platform is not being 
+           (7) Binaries only; source code for this platform is not being
                released at this time.
 
 
 Known Problems
 ==============
 
-    * On Linux 2.4 IA64, Fortran test fails for h5dwrite_vl_f 
+    * On Linux 2.4 IA64, Fortran test fails for h5dwrite_vl_f
       for integer and real base datatypes.
 
     * When fortran library is built with Intel compilers, compilation
-      for fflush1.f90, fflush2.f90 and fortanlib_test.f90 will fail 
+      for fflush1.f90, fflush2.f90 and fortanlib_test.f90 will fail
       complaining about EXEC function. Comment the call to EXEC subroutine
-      in each program, or get a patch for the HDF5 Fortran source code. 
+      in each program, or get a patch for the HDF5 Fortran source code.
 
     * Fortran external dataset test fails on Linux 2.4 with pgf90 compiler.
 
@@ -6137,11 +6137,11 @@ Known Problems
     * Datasets or attributes which have a variable-length string datatype are
       not printing correctly with h5dump and h5ls.
 
-    * When a dataset with the variable-length datatype is overwritten, 
-      the library can develop memory leaks that cause the file to become 
+    * When a dataset with the variable-length datatype is overwritten,
+      the library can develop memory leaks that cause the file to become
       unnecessarily large.  This is planned to be fixed in the next release.
 
-    * On the SV1, the h5ls test fails due to a difference between the 
+    * On the SV1, the h5ls test fails due to a difference between the
       SV1 printf precision and the printf precision on other platforms.
 
     * The h5dump tests may fail to match the expected output on some
@@ -6152,17 +6152,17 @@ Known Problems
     * The --enable-static-exec configure flag fails to compile for HP-UX
       11.00 platforms.
 
-    * The executables are always dynamic on IRIX64 6.5(64 and n32) and 
+    * The executables are always dynamic on IRIX64 6.5(64 and n32) and
       IRIX 6.5 even if they are configured with --enable-static-exec.
 
     * IRIX 6.5 fails to compile if configured with --enable-static-exec.
 
     * The executables are always dynamic on Solaris 2.7 ans 2.8(64 and n32)
       even if they are configured with --enable-static-exec.
-    
+
     * The HDF5_MPI_OPT_TYPES optimization code in the parallel HDF5 will cause
       a hang in some cases when chunked storage is used.  This is now set to
-      be off by default.  One may turn it on by setting the environment 
+      be off by default.  One may turn it on by setting the environment
       variable HDF5_MPI_OPT_TYPES to a non-zero value such as 1.
 
     * On OSF1 v5.1 and IA32 h5dumpgentst program that generates test files
@@ -6173,10 +6173,10 @@ Known Problems
 
     * On Cray T3E (sn6606 2.0.6.08 unicosmk CRAY T3E) with Cray Standard C Version 6.6.0.1.3
       compiler optimization causes errors in many HDF5 Library tests. Use -g -h zero flags
-      to build HDF5 Library. 
+      to build HDF5 Library.
 
     * On Cray SV1 10.0.1. 0 datatype convertion test fails. Please check HDF FTP site
-      if patch is available. We will try to provide one in the nearest future. 
+      if patch is available. We will try to provide one in the nearest future.
 
     * For configuration, building and testing with Intel and PGI compilers see
       corresponding section in INSTALL file.
@@ -6200,7 +6200,7 @@ The HDF5 documentation can be found on the NCSA ftp server
     /HDF/HDF5/docs/
 
 For more information, see the HDF5 home page at:
-   
+
     http://hdf.ncsa.uiuc.edu/HDF5/
 
 If you have any questions or comments, please send them to:
@@ -6223,32 +6223,32 @@ New Features
 ============
   o Configuration
   ================
-    * The H4 to H5 tools have been removed from the main source and placed 
+    * The H4 to H5 tools have been removed from the main source and placed
       in a separate package. You can get these tools from the HDF ftp site
-      (ftp://hdf.ncsa.uiuc.edu/). The "--with-hdf4" command-line option 
+      (ftp://hdf.ncsa.uiuc.edu/). The "--with-hdf4" command-line option
       during configure is no longer valid.  BW - 2002/06/25
 
   o Library
   =========
     o General
-    --------- 
+    ---------
       * Fill-value forward-compatibility with release 1.5 was added.  SLU -
         2002/04/11
       * A new query function H5Tget_member_index has been added for compound
-        and enumeration data types.  This function retrieves a member's index 
+        and enumeration data types.  This function retrieves a member's index
         by name.  SLU - 2002/04/05
       * Added serial multi-gigabyte file size test.  "test/big -h" shows
         the help page.  AKC - 2002/03/29
- 
+
     o APIs
     ------
-      * The F90 subroutines h5dwrite_f, h5dread_f, h5awrite_f, and h5aread_f 
-        were overloaded with a "dims" argument of type INTEGER(HSIZE_T) to 
-        specify the size of the array.  We recommend using these subroutines 
+      * The F90 subroutines h5dwrite_f, h5dread_f, h5awrite_f, and h5aread_f
+        were overloaded with a "dims" argument of type INTEGER(HSIZE_T) to
+        specify the size of the array.  We recommend using these subroutines
         with the new type; module subroutines that accept "dims" as an i
-        INTEGER array of size 7 will be deprecated in release 1.6.  
+        INTEGER array of size 7 will be deprecated in release 1.6.
         EIP - 2002/05/06
- 
+
     o Performance
     -------------
       * Added internal "small data" aggregation, which can reduce the number of
@@ -6305,15 +6305,15 @@ New Features
     * Intel C++ and F90 compilers Version 6.0 are supported on Linux 2.4.
     * Intel C++ compilers Version 6.0 are supported on Windows 2000.
 
-  
+
   o Misc.
   =========================================
    * zlib has been moved out of the Windows source release. Users should go to
-     the ZLIB homepage(http://www.zlib.org) to download the corresponding 
+     the ZLIB homepage(http://www.zlib.org) to download the corresponding
      zlib library.
-   * The Windows binary release is built with the old version of the zlib 
-     library.  We expect users to use zlib 1.1.4 to build with the source 
-     release.  
+   * The Windows binary release is built with the old version of the zlib
+     library.  We expect users to use zlib 1.1.4 to build with the source
+     release.
    * In the Windows-specific install document, we specify how to test backward
      compatibility. However, in this release, we are not testing the backward
      compatibility of HDF5.
@@ -6337,7 +6337,7 @@ Bug Fixes since HDF5-1.4.3 Release
         library to go into infinite loop.  QAK - 2002/06/10
     * Fixed bug (#699, fix provided by a user) where a scalar dataspace was
         written to the file and then subsequently queried with the
-        H5Sget_simple_extent_type function; type was reported as H5S_SIMPLE 
+        H5Sget_simple_extent_type function; type was reported as H5S_SIMPLE
         instead of H5S_SCALAR. EIP - 2002/06/04
     * Clear symbol table node "dirty" flag when flushing symbol tables to
         disk, to reduce I/O calls made & improve performance.  QAK - 2002/06/03
@@ -6390,11 +6390,11 @@ address it.
 Documentation
 =============
     * Documentation was updated for the hdf5-1.4.4 release.
-    * A new "HDF5 User's Guide" is under development.  See 
+    * A new "HDF5 User's Guide" is under development.  See
       http://hdf.ncsa.uiuc.edu/HDF5/doc_dev_snapshot/H5_NewUG/current/.
-    * A "Parallel HDF5 Tutorial" is available at 
+    * A "Parallel HDF5 Tutorial" is available at
       http://hdf.ncsa.uiuc.edu/HDF5/doc/Tutor/.
-    * The "HDF5 Tutorial" is not distributed with this release.  It is 
+    * The "HDF5 Tutorial" is not distributed with this release.  It is
       available at http://hdf.ncsa.uiuc.edu/HDF5/doc/Tutor/.
 
 
@@ -6408,20 +6408,20 @@ Platforms Tested
     AIX 4.3 (IBM SP RS6000)       C for AIX Compiler, Version 5.0.2.0
                                   xlf 7.1.0.2
                                   poe 3.1.0.12 (includes mpi)
-    AIX 5.1                       xlc 5.0.2.0 
+    AIX 5.1                       xlc 5.0.2.0
                                   xlf 07.01.0000.0002
                                   mpcc_r 5.0.2.0; mpxlf_r 07.01.0000.0002
     Cray T3E sn6711 2.0.5.57      Cray Standard C Version 6.5.0.3
                                   Cray Fortran Version 3.5.0.4
-    Cray SV1 10.0.1.1             Cray Standard C Version 6.5.0.3 
+    Cray SV1 10.0.1.1             Cray Standard C Version 6.5.0.3
                                   Cray Fortran Version 3.5.0.4
     FreeBSD 4.6                   gcc 2.95.4
                                   g++ 2.95.4
     HP-UX B.10.20                 HP C  HP92453-01 A.10.32.30
                                   HP F90 v2.3
-    HP-UX B.11.00                 HP C  HP92453-01 A.11.01.20 
+    HP-UX B.11.00                 HP C  HP92453-01 A.11.01.20
                                   HP F90 v2.4
-    HP-UX B.11.00 SysV            HP C  HP92453-01 A.11.01.20 
+    HP-UX B.11.00 SysV            HP C  HP92453-01 A.11.01.20
                                   HP F90 v2.4
                                   HP MPI [not a product] (03/24/2000) B6060BA
     IRIX 6.5                      MIPSpro cc 7.30
@@ -6440,16 +6440,16 @@ Platforms Tested
                                   Compaq Fortran V5.5-1877-48BBF
                                   gcc version 3.0 for C++
     SunOS 5.7                     WorkShop Compilers 5.0 98/12/15 C 5.0
-     (Solaris 2.7)                WorkShop Compilers 5.0 98/12/15 C++ 5.0 
-                                  WorkShop Compilers 5.0 98/10/25 
-                                  FORTRAN 90 2.0 Patch 107356-04 
+     (Solaris 2.7)                WorkShop Compilers 5.0 98/12/15 C++ 5.0
+                                  WorkShop Compilers 5.0 98/10/25
+                                  FORTRAN 90 2.0 Patch 107356-04
     SunOS 5.8/32                  Sun WorkShop 6 update 1 C 5.2 2000/09/11
-     (Solaris 2.8)                Sun WorkShop 6 update 1 Fortran 95 6.1 
+     (Solaris 2.8)                Sun WorkShop 6 update 1 Fortran 95 6.1
                                           Patch 109503-07 2001/08/11
                                   Sun WorkShop 6 update 1 C++ 5.2 Patch
                                         109508-04 2001/07/11
     SunOS 5.8/64                  Sun WorkShop 6 update 1 C 5.2 2000/09/11
-     (Solaris 2.8)                Sun WorkShop 6 update 1 Fortran 95 6.1 
+     (Solaris 2.8)                Sun WorkShop 6 update 1 Fortran 95 6.1
                                           Patch 109503-07 2001/08/11
                                   Sun WorkShop 6 update 1 C++ 5.2 Patch
                                         109508-04 2001/07/11
@@ -6459,7 +6459,7 @@ Platforms Tested
                                   gcc 2.96
                                   Intel(R) C++ Version 6.0
                                   Intel(R) Fortran Compiler Version 6.0
-                                  
+
     IA-64 Linux 2.4.16 ia64       gcc version 2.96 20000731
                                   Intel(R) C++ Version 6.0
                                   Intel(R) Fortran Compiler Version 6.0
@@ -6540,10 +6540,10 @@ Supported Configuration Features Summary
 
     Footnotes: (1) Using mpich.
                (2) Using mpt and mpich.
-               (3) When configured with static-exec enabled, tests fail in 
+               (3) When configured with static-exec enabled, tests fail in
                    serial mode.
                (4) No HDF4-related tools.
-               (5) Shared libraries are provided only for the C library, 
+               (5) Shared libraries are provided only for the C library,
                    except on Windows where they are provided for all languages.
                (6) Linux 2.4 with Intel compilers.
 
@@ -6554,11 +6554,11 @@ Known Problems
     * Datasets or attributes which have a variable-length string datatype are
       not printing correctly with h5dump and h5ls.
 
-    * When a dataset with the variable-length datatype is overwritten, 
-      the library can develop memory leaks that cause the file to become 
+    * When a dataset with the variable-length datatype is overwritten,
+      the library can develop memory leaks that cause the file to become
       unnecessarily large.  This is planned to be fixed in the next release.
 
-    * On the SV1, the h5ls test fails due to a difference between the 
+    * On the SV1, the h5ls test fails due to a difference between the
       SV1 printf precision and the printf precision on other platforms.
 
     * The h5dump tests may fail to match the expected output on some
@@ -6569,14 +6569,14 @@ Known Problems
     * The --enable-static-exec configure flag fails to compile for HP-UX
       11.00 platforms.
 
-    * The executables are always dynamic on IRIX64 6.5(64 and n32) and 
+    * The executables are always dynamic on IRIX64 6.5(64 and n32) and
       IRIX 6.5 even if they are configured with --enable-static-exec.
 
     * IRIX 6.5 fails to compile if configured with --enable-static-exec.
-    
+
     * The HDF5_MPI_OPT_TYPES optimization code in the parallel HDF5 will cause
       a hang in some cases when chunked storage is used.  This is now set to
-      be off by default.  One may turn it on by setting the environment 
+      be off by default.  One may turn it on by setting the environment
       variable HDF5_MPI_OPT_TYPES to a non-zero value such as 1.
 
     * On IA32 and IA64 systems, if you use a compiler other than GCC (such as
@@ -6592,7 +6592,7 @@ Known Problems
           # How to pass a linker flag through the compiler.
           wl="-Wl,"
 
-    * To build the Fortran library using Intel compilers, one has to 
+    * To build the Fortran library using Intel compilers, one has to
           x modify the source code in the fortran/src directory to remove the
             !DEC and !MS compiler directives.
           x The build will fail in the fortran/test directory and then in the
@@ -6600,7 +6600,7 @@ Known Problems
             those directories to contain two lines
 
                     work.pc
-                    ../src/work.pc 
+                    ../src/work.pc
 
     * To build the Fortran library on IA64 use
                    setenv CC "ecc -DIA64"
@@ -6627,7 +6627,7 @@ The HDF5 documentation can be found on the NCSA ftp server
      /HDF/HDF5/docs/
 
 For more information look at the HDF5 home page at:
-   
+
     http://hdf.ncsa.uiuc.edu/HDF5/
 
 If you have any questions or comments, please send them to:
@@ -6655,7 +6655,7 @@ New Features
   o Library
   =========
    o General
-   --------- 
+   ---------
     * Added a new test to verify the information provided by the configure
       command.
     * Changed internal error handling macros to reduce code size of library by
@@ -6756,7 +6756,7 @@ Bug Fixes since HDF5-1.4.2 Release
 Documentation
 =============
     * Documentation was updated for the hdf5-1.4.3 release.
-    * A new "HDF5 User's Guide" is under development.  See 
+    * A new "HDF5 User's Guide" is under development.  See
       http://hdf.ncsa.uiuc.edu/HDF5/doc_dev_snapshot/H5_NewUG/current/.
     * Parallel Tutorial is available at http://hdf.ncsa.uiuc.edu/HDF5/doc/Tutor/
 
@@ -6773,15 +6773,15 @@ Platforms Tested
                                   poe 3.1.0.12 (includes mpi)
     Cray T3E sn6711 2.0.5.57      Cray Standard C Version 6.5.0.3
                                   Cray Fortran Version 3.5.0.4
-    Cray SV1 10.0.0.8             Cray Standard C Version 6.5.0.3 
+    Cray SV1 10.0.0.8             Cray Standard C Version 6.5.0.3
                                   Cray Fortran Version 3.5.0.4
     FreeBSD 4.5                   gcc 2.95.3
                                   g++ 2.95.3
     HP-UX B.10.20                 HP C  HP92453-01 A.10.32.30
                                   HP F90 v2.3
-    HP-UX B.11.00                 HP C  HP92453-01 A.11.01.20 
+    HP-UX B.11.00                 HP C  HP92453-01 A.11.01.20
                                   HP F90 v2.4
-    HP-UX B.11.00 SysV            HP C  HP92453-01 A.11.01.20 
+    HP-UX B.11.00 SysV            HP C  HP92453-01 A.11.01.20
                                   HP F90 v2.4
                                   HP MPI [not a product] (03/24/2000) B6060BA
     IRIX 6.5                      MIPSpro cc 7.30
@@ -6792,19 +6792,19 @@ Platforms Tested
                                   gcc 2.95.2 with mpich 1.2.1
                                   g++ 2.95.2
                                   pgf90 3.2-4
-    OSF1 V5.1                     Compaq C V6.3-028         
+    OSF1 V5.1                     Compaq C V6.3-028
                                   Compaq Fortran V5.4-1283
     SunOS 5.7                     WorkShop Compilers 5.0 98/12/15 C 5.0
-     (Solaris 2.7)                Workshop Compilers 5.0 98/12/15 C++ 5.0 
-                                  Workshop Compilers 5.0 98/10/25 
-                                  FORTRAN 90 2.0 Patch 107356-04 
+     (Solaris 2.7)                Workshop Compilers 5.0 98/12/15 C++ 5.0
+                                  Workshop Compilers 5.0 98/10/25
+                                  FORTRAN 90 2.0 Patch 107356-04
     SunOS 5.8/32                  Sun WorkShop 6 update 1 C 5.2 2000/09/11
-     (Solaris 2.8)                Sun WorkShop 6 update 1 Fortran 95 6.1 
+     (Solaris 2.8)                Sun WorkShop 6 update 1 Fortran 95 6.1
                                           Patch 109503-07 2001/08/11
                                   Sun WorkShop 6 update 1 C++ 5.2 Patch
                                         109508-04 2001/07/11
     SunOS 5.8/64                  Sun WorkShop 6 update 1 C 5.2 2000/09/11
-     (Solaris 2.8)                Sun WorkShop 6 update 1 Fortran 95 6.1 
+     (Solaris 2.8)                Sun WorkShop 6 update 1 Fortran 95 6.1
                                           Patch 109503-07 2001/08/11
                                   Sun WorkShop 6 update 1 C++ 5.2 Patch
                                         109508-04 2001/07/11
@@ -6813,9 +6813,9 @@ Platforms Tested
     IA-32 Linux 2.2.10smpx        cc Intel 5.0.1
                                   egcs-2.91.66
     IA-64 Linux 2.4.16 ia64       gcc version 2.96 20000731
-                                  Intel(R) C++ Itanium(TM) Compiler 
+                                  Intel(R) C++ Itanium(TM) Compiler
                                   for the Itanium(TM)-based applications,
-                                  Version 6.0 Beta, Build 20010905       
+                                  Version 6.0 Beta, Build 20010905
     Windows 2000 (NT5.0)          MSVC++ 6.0
                                   DEC Visual Fortran 6.0
     Windows NT4.0                 MSVC++ 6.0
@@ -6841,7 +6841,7 @@ Supported Configuration Features Summary
     Solaris2.7     y  y (1)     y    n         y     y          y     y
     Solaris2.8 64  y  n         y    n         y     y          y     y
     Solaris2.8 32  y  n         y    n         y     y          y     y
-    IA-64          y  n         n    n         n     n          y     y 
+    IA-64          y  n         n    n         n     n          y     y
     IRIX6.5        y  y (1)     n    n         n     y          y     y
     IRIX64_6.5 64  y  y (2)     y    y         n     y          y     y
     IRIX64_6.5 32  y  y (2)     n    n         n     y          y     y
@@ -6868,7 +6868,7 @@ Supported Configuration Features Summary
     Solaris2.7     n              x         y        n    n     y
     Solaris2.8 64  n              y         n        n    n     y
     Solaris2.8 32  n              x         n        n    n     y
-    IA-64          n              n         n        n    n     y   
+    IA-64          n              n         n        n    n     y
     IRIX6.5        n              x         y        n    n     y
     IRIX64_6.5 64  n              x         y        n    y     y
     IRIX64_6.5 32  n              x         y        n    y     y
@@ -6892,7 +6892,7 @@ Supported Configuration Features Summary
 
     Footnotes:  (1) Using mpich.
                 (2) Using mpt and mpich.
-                (3) When configured with static-exec enabled, tests fail 
+                (3) When configured with static-exec enabled, tests fail
                     in serial mode.
                 (4) No HDF4-related tools.
                 (5) Shared libraries are provided only for the C library.
@@ -6905,11 +6905,11 @@ Known Problems
     * Datasets or attributes which have a variable-length string datatype are
       not printing correctly with h5dump and h5ls.
 
-    * When a dataset with the variable-legth datatype is overwritten, 
-      the library can develop memory leaks that cause the file to become 
+    * When a dataset with the variable-legth datatype is overwritten,
+      the library can develop memory leaks that cause the file to become
       unnecessarily large.  This is planned to be fixed in the next release.
 
-    * On the SV1, the h5ls test fails due to a difference between the 
+    * On the SV1, the h5ls test fails due to a difference between the
       SV1 printf precision and the printf precision on other platforms.
 
 
@@ -6921,11 +6921,11 @@ Known Problems
     * The --enable-static-exec configure flag fails to compile for HP-UX
       11.00 platforms.
 
-    * The executables are always dynamic on IRIX64 6.5(64 and n32) and 
+    * The executables are always dynamic on IRIX64 6.5(64 and n32) and
       IRIX 6.5 even if they are configured with --enable-static-exec.
 
     * IRIX 6.5 fails to compile if configured with --enable-static-exec.
-    
+
     * The HDF5_MPI_OPT_TYPES optimization code in the parallel HDF5 will cause
       a hang in some cases when chunked storage is used.  This is now set to
       be off by default.  One may turn it on by setting environment variable
@@ -6933,12 +6933,12 @@ Known Problems
 
     * On IA64 systems one has to use -DIA64 compilation flag to compile
       h4toh5 and h5toh4 utilites. After configuration step manually modify
-      Makefile in the tools/h4toh4 and tools/h5toh4 directories to add 
+      Makefile in the tools/h4toh4 and tools/h5toh4 directories to add
       -DIA64 to the compilation flags.
 
-    * On IA32 ansd IA64 systems, if you use a compiler other than GCC 
+    * On IA32 ansd IA64 systems, if you use a compiler other than GCC
       (such as Intel's ecc compiler), you will need to modify the generated
-      "libtool" program after configuration is finished. On or around line 102 
+      "libtool" program after configuration is finished. On or around line 102
       of the libtool file, there are lines which look like:
 
           # How to pass a linker flag through the compiler.
@@ -6952,7 +6952,7 @@ Known Problems
 
 %%%%1.4.2%%%%   Release Information for hdf5-1.4.2 (31/July/01)
 
-10.   Release Information for hdf5-1.4.2 
+10.   Release Information for hdf5-1.4.2
 =================================================================
 
 
@@ -6968,7 +6968,7 @@ The HDF5 documentation can be found on the NCSA ftp server
      /HDF/HDF5/docs/
 
 For more information look at the HDF5 home page at:
-   
+
     http://hdf.ncsa.uiuc.edu/HDF5/
 
 If you have any questions or comments, please send them to:
@@ -6999,33 +6999,33 @@ New Features
     * Parallel HDF5 now runs on the HP V2500 and HP N4000 machines.
     * F90 API:
         - Added aditional parameter "dims" to the h5dread_f/h5dwrite_f and
-          h5aread_f/h5awrite_f subroutines.  This parameter is a 1-D array 
-          of size 7 and contains the sizes of the data buffer dimensions. 
+          h5aread_f/h5awrite_f subroutines.  This parameter is a 1-D array
+          of size 7 and contains the sizes of the data buffer dimensions.
           This change enables portability between Windows and UNIX platforms.
-          In previous versions of the F90 APIs, the data buffer parameters of 
-          the above functions were declared as assumed-shape arrays, which 
-          were passed to the C functions by a descriptor.  There is no 
-          portable means, however, of passing descriptors from F90 to C, 
+          In previous versions of the F90 APIs, the data buffer parameters of
+          the above functions were declared as assumed-shape arrays, which
+          were passed to the C functions by a descriptor.  There is no
+          portable means, however, of passing descriptors from F90 to C,
           causing portability problems between Windows and UNIX and among
           UNIX platforms.  With this change, the data buffers are assumed-
           size arrays, which can be portably passed to the C functions.
-    * F90 static library is available on Windows platforms. 
+    * F90 static library is available on Windows platforms.
       See INSTALL_Windows_withF90.txt for details.
     * F90 APIs are available on HPUX 11.00 and 10.20 and IBM SP platforms.
-    * H5 <-> GIF convertor has been added. This is available under 
+    * H5 <-> GIF convertor has been added. This is available under
       tools/gifconv. The convertor supports the ability to create animated
       gifs as well.
     * Verified correct operation of library on Solaris 2.8 in both 64-bit and
       32-bit compilation modes.  See INSTALL document for instructions on
       compiling the distribution with 64-bit support.
-    * Added support for the Metrowerks Code Warrior compiler for Windows.  
+    * Added support for the Metrowerks Code Warrior compiler for Windows.
     * For H4->H5 converter utility, added a new option to choose not to convert
       HDF4 specified attributes(reference number, class) into HDF5 attributes.
-    * Added support chunking and compression in SDS and image in H4->H5 converter. 
-      Currently HDF5 only supports gzip compression, so by default an HDF4 file 
-      with any other compression method will be converted into an HDF5 file in 
-      gzip compression. 
-    * correct the order or reading HDF4 image array in H4->H5 conversion.  
+    * Added support chunking and compression in SDS and image in H4->H5 converter.
+      Currently HDF5 only supports gzip compression, so by default an HDF4 file
+      with any other compression method will be converted into an HDF5 file in
+      gzip compression.
+    * correct the order or reading HDF4 image array in H4->H5 conversion.
     * Added new parallel hdf5 tests in t_mpi.  The new test checks if the
       filesystem or the MPI-IO can really handle greater than 2GB files.
       If it fails, it prints information message only without failing the
@@ -7040,8 +7040,8 @@ New Features
     * Added new checking in H5check_version() to verify the five HDF5 version
       information macros (H5_VERS_MAJOR, H5_VERS_MINOR, H5_VERS_RELEASE,
       H5_VERS_SUBRELEASE and H5_VERS_INFO) are consistent.
-      
-         
+
+
 Bug Fixes since HDF5-1.4.1 Release
 ==================================
 
@@ -7050,21 +7050,21 @@ Bug Fixes since HDF5-1.4.1 Release
     * Fixed problems with Pablo build and linking with non-standard MPI I/O.
     * Fixed build on Linux systems with --enable-static-exec flag. It now
       works correctly.
-    * IMPORTANT: Fixed file metadata corruption bug which could cause 
+    * IMPORTANT: Fixed file metadata corruption bug which could cause
       metadata data loss in certain situations.
     * The allocation by alignment (H5Pset_alignment) feature code somehow
       got dropped in some 1.3.x version. Re-implemented it with "new and
       improved" algorithm.  It keeps track of "wasted" file-fragment in
       the free-list too.
     * Removed limitation that the data transfer buffer size needed to be
-      set for datasets whose dimensions were too large for the 'all' 
-      selection code to handle.  Any size dimensioned datasets should be 
+      set for datasets whose dimensions were too large for the 'all'
+      selection code to handle.  Any size dimensioned datasets should be
       handled correctly now.
     * Changed behavior of H5Tget_member_type to correctly emulate HDF5 v1.2.x
       when --enable-hdf5v1_2 configure flag is enabled.
-    * Added --enable-linux-lfs flag to allow more control over whether to 
+    * Added --enable-linux-lfs flag to allow more control over whether to
       enable or disable large file support on Linux.
-    * Fixed various bugs releated to SDS dimensional scale conversions in H4->H5 
+    * Fixed various bugs releated to SDS dimensional scale conversions in H4->H5
       converter.
     * Fixed a bug to correctly convert HDF4 objects with fill value into HDF5.
     * Fixed a bug of H5pubconf.h causing repeated definitions if it is included
@@ -7082,18 +7082,18 @@ Documentation
 =============
 
     * The H5T_conv_t and H5T_cdata_t structures are now properly defined
-      in the H5Tregister entry in the "H5T" section of the "HDF5 Reference 
-      Manual" and described in detail in section 12, "Data Conversions," in 
+      in the H5Tregister entry in the "H5T" section of the "HDF5 Reference
+      Manual" and described in detail in section 12, "Data Conversions," in
       the "Datatypes" chapter of the "HDF5 User's Guide."
     * The new tools h52gif and gif2h5 have been added to the "Tools" section
       of the Reference Manual.
-    * A "Freespace Management" section has been added to the "Performance" 
+    * A "Freespace Management" section has been added to the "Performance"
       chapter of the User's Guide.
     * Several user-reported bugs have been fixed since Release 1.4.1.
     * The "HDF5 Image and Palette Specification" (in the "HDF5 Application
-      Developer's Guide") has been heavily revised.  Based on extensive user 
-      feedback and input from visualization software developers, Version 1.2 
-      of the image specification is substantially different from prior 
+      Developer's Guide") has been heavily revised.  Based on extensive user
+      feedback and input from visualization software developers, Version 1.2
+      of the image specification is substantially different from prior
       versions.
 
 
@@ -7108,15 +7108,15 @@ Platforms Tested
                                   xlf 7.1.0.2
                                   poe 2.4.0.14 (includes mpi)
     Cray T3E sn6711 2.0.5.49a     Cray Standard C Version 6.5.0.1
-    Cray SV1 10.0.0.2             Cray Standard C Version 6.5.0.1  
+    Cray SV1 10.0.0.2             Cray Standard C Version 6.5.0.1
                                   Cray Fortran Version 3.5.0.1
     FreeBSD 4.3                   gcc 2.95.3
                                   g++ 2.95.3
     HP-UX B.10.20                 HP C  HP92453-01 A.10.32.30
                                   HP F90 v2.3
-    HP-UX B.11.00                 HP C  HP92453-01 A.11.01.20 
+    HP-UX B.11.00                 HP C  HP92453-01 A.11.01.20
                                   HP F90 v2.4
-    HP-UX B.11.00 SysV            HP C  HP92453-01 A.11.01.20 
+    HP-UX B.11.00 SysV            HP C  HP92453-01 A.11.01.20
                                   HP F90 v2.4
     IRIX 6.5                      MIPSpro cc 7.30
     IRIX64 6.5 (64 & n32)         MIPSpro cc 7.3.1.2m
@@ -7128,19 +7128,19 @@ Platforms Tested
                                   pgf90 3.2-4
     OSF1 V4.0                     DEC-V5.2-040 on Digital UNIX V4.0 (Rev 564)
                                   Digital Fortran 90 V4.1-270
-    SunOS 5.6                     WorkShop Compilers 5.0 98/12/15 C 5.0 
-     (Solaris 2.6)                WorkShop Compilers 5.0 98/10/25 FORTRAN 90 
+    SunOS 5.6                     WorkShop Compilers 5.0 98/12/15 C 5.0
+     (Solaris 2.6)                WorkShop Compilers 5.0 98/10/25 FORTRAN 90
                                           2.0 Patch 107356-04
     SunOS 5.7                     WorkShop Compilers 5.0 98/12/15 C 5.0
-     (Solaris 2.7)                Workshop Compilers 5.0 98/12/15 C++ 5.0 
+     (Solaris 2.7)                Workshop Compilers 5.0 98/12/15 C++ 5.0
                                   Workshop Compilers 5.0 98/10/25 FORTRAN 90
-                                          2.0 Patch 107356-04 
+                                          2.0 Patch 107356-04
     SunOS 5.8/32                  Sun WorkShop 6 update 1 C 5.2 2000/09/11
-     (Solaris 2.8)                Sun WorkShop 6 update 1 Fortran 95 6.1 
+     (Solaris 2.8)                Sun WorkShop 6 update 1 Fortran 95 6.1
                                           2000/09/11
                                   Sun WorkShop 6 update 1 C++ 5.2 2000/09/11
     SunOS 5.8/64                  Sun WorkShop 6 update 1 C 5.2 2000/09/11
-     (Solaris 2.8)                Sun WorkShop 6 update 1 Fortran 95 6.1 
+     (Solaris 2.8)                Sun WorkShop 6 update 1 Fortran 95 6.1
                                           2000/09/11
                                   Sun WorkShop 6 update 1 C++ 5.2 2000/09/11
     TFLOPS r1.0.4 v4.0.7 i386     pgcc Rel 3.1-4i with mpich-1.2.1 with
@@ -7220,7 +7220,7 @@ Supported Configuration Features Summary
 
     Footnotes:  (1) Using mpich.
                 (2) Using mpt and mpich.
-                (3) When configured with static-exec enabled, tests fail 
+                (3) When configured with static-exec enabled, tests fail
                     in serial mode.
                 (4) No HDF4-related tools.
                 (5) Shared libraries are provided only for the C library.
@@ -7229,11 +7229,11 @@ Supported Configuration Features Summary
 Known Problems
 ==============
 
-    * When a dataset with the variable-legth datatype is overwritten, 
-      the library can develop memory leaks that cause the file to become 
+    * When a dataset with the variable-legth datatype is overwritten,
+      the library can develop memory leaks that cause the file to become
       unnecessarily large.  This is planned to be fixed in the next release.
 
-    * On the SV1, the h5ls test fails due to a difference between the 
+    * On the SV1, the h5ls test fails due to a difference between the
       SV1 printf precision and the printf precision on other platforms.
 
     * The h5dump tests may fail to match the expected output in some
@@ -7244,13 +7244,13 @@ Known Problems
     * The --enable-static-exec configure flag fails to compile for HP-UX
       11.00 platforms.
 
-    * The executables are always dynamic on IRIX64 6.5(64 and n32) and 
+    * The executables are always dynamic on IRIX64 6.5(64 and n32) and
       IRIX 6.5 even if they are configured with --enable-static-exec.
 
     * IRIX 6.5 fails to compile if configured with --enable-static-exec.
-    
+
     * For 24-bit image conversion from H4->H5, the current conversion is
-      not consistent with HDF5 image specification. 
+      not consistent with HDF5 image specification.
 
     * In some cases, and SDS with an UNLIMITED dimension that has not
       been written (current size = 0) is not converted correctly.
@@ -7269,7 +7269,7 @@ Known Problems
 =====================================================================
 
 
- 
+
                        HDF5 Release 1.4.1
 
 
@@ -7285,7 +7285,7 @@ The HDF5 documentation can be found on the NCSA ftp server
      /HDF/HDF5/docs/
 
 For more information look at the HDF5 home page at:
-   
+
     http://hdf.ncsa.uiuc.edu/HDF5/
 
 If you have any questions or comments, please send them to:
@@ -7307,10 +7307,10 @@ New Features
 ============
 
    * XML output option for h5dump utility.
-  
+
      A new option --xml to output data in XML format has been added. The
      XML output contains a complete description of the file, marked up in
-     XML. 
+     XML.
 
      The XML conforms to the HDF5 Document Type Definition (DTD), which
      is available at:
@@ -7353,25 +7353,25 @@ Bug Fixes since HDF5-1.4.0 Release
 Documentation
 =============
 
-    PDF and Postscript versions of the following documents are available 
+    PDF and Postscript versions of the following documents are available
     for this release:
         Document                                 Filename
         --------                                 --------
         Introduction to HDF5                     H5-R141-Introduction.pdf
-        HDF5 Reference Manual                    H5-R141-RefManual.pdf 
+        HDF5 Reference Manual                    H5-R141-RefManual.pdf
         C++ APIs to HDF5 documents               H5-R141-Cplusplus.pdf
         Fortran90 APIs to HDF5 documents         H5-R141-Fortran90.pdf
 
         PDF and Postscript files containing      H5-R141-DocSet.pdf
             all of the above                     H5-R141-DocSet.ps
 
-    These files are not included in this distribution, but are available 
+    These files are not included in this distribution, but are available
     via the Web or FTP at the following locations:
         http://hdf.ncsa.uiuc.edu/HDF5/doc/PSandPDF/
         ftp://ftp.ncsa.uiuc.edu/HDF/HDF5/docs/
 
-    While these documents are labeled Release 1.4.1, they describe 
-    Release 1.4.0 as well.  
+    While these documents are labeled Release 1.4.1, they describe
+    Release 1.4.0 as well.
 
 
 Platforms Tested
@@ -7392,8 +7392,8 @@ Due to the nature of this release only C, C++ libraries and tools were tested.
                                   g++ 2.95.2
     OSF1 V4.0                     DEC-V5.2-040
                                   Digital Fortran 90 V4.1-270
-    SunOS 5.6                     WorkShop Compilers 5.0 98/12/15 C 5.0 
-     (Solaris 2.6)                
+    SunOS 5.6                     WorkShop Compilers 5.0 98/12/15 C 5.0
+     (Solaris 2.6)
 
     SunOS 5.7                     WorkShop Compilers 5.0 98/12/15 C 5.0
      (Solaris 2.7)                Workshop Compilers 5.0 98/12/15 C++ 5.0
@@ -7419,11 +7419,11 @@ Known Problems
     * The --enable-static-exec configure flag fails to compile for HP-UX
       11.00 platforms.
 
-    * The executable are always dynamic on IRIX64 6.5(64 and n32) and 
+    * The executable are always dynamic on IRIX64 6.5(64 and n32) and
       IRIX 6.5 even if they are configured with --enable-static-exec.
 
     * The shared library failed compilation on IRIX 6.5.
-    
+
     * After "make install" or "make install-doc" one may need to reload the source
       from the tar file before doing another build.
 
@@ -7434,7 +7434,7 @@ Known Problems
 
 8.  Release Information for hdf5-1.4.0
 ===================================================================
- 
+
                        HDF5 Release 1.4.0
 
 
@@ -7451,7 +7451,7 @@ The HDF5 documentation can be found on the NCSA ftp server
      /HDF/HDF5/docs/
 
 For more information look at the HDF5 home page at:
-   
+
     http://hdf.ncsa.uiuc.edu/HDF5/
 
 If you have any questions or comments, please send them to:
@@ -7462,11 +7462,11 @@ If you have any questions or comments, please send them to:
 CONTENTS
 
 - New Features
-- h4toh5 Utility 
+- h4toh5 Utility
 - F90 Support
 - C++ Support
-- Pablo Support 
-- Bug Fixes since HDF5-1.2.0 
+- Pablo Support
+- Bug Fixes since HDF5-1.2.0
 - Bug Fixes since HDF5-1.4.0-beta2
 - Bug Fixes since HDF5-1.4.0
 - Documentation
@@ -7495,15 +7495,15 @@ New Features
    * Added new Virtual File Driver, Stream VFD, to send/receive entire
      HDF5 files via socket connections.
    * As parts of VFL, HDF-GASS and HDF-SRB are also added to this
-     release. To find out details, please read INSTALL_VFL file. 
+     release. To find out details, please read INSTALL_VFL file.
    * Increased maximum number of dimensions for a dataset (H5S_MAX_RANK)
      from 31 to 32 to align with HDF4 & netCDF.
    * Added 'query' function to VFL drivers.  Also added 'type' parameter to
      VFL 'read' & 'write' calls, so they are aware of the type of data
      being accessed in the file.  Updated the VFL document also.
    * A new h4toh5 utility, to convert HDF4 files to analogous HDF5 files.
-   * Added a new array datatype to the datatypes which can be created.  
-     Removed "array fields" from compound datatypes (use an array datatype 
+   * Added a new array datatype to the datatypes which can be created.
+     Removed "array fields" from compound datatypes (use an array datatype
      instead).
    * Parallel HDF5 works correctly with mpich-1.2.1 on Solaris, SGI, Linux.
    * You can now install the HDF5 documentation using the
@@ -7514,26 +7514,26 @@ New Features
      Check doc/html/TechNotes/openmp-hdf5.html for details.
 
 
-h4toh5 Utility 
+h4toh5 Utility
 ==============
-    The h4toh5 utility is a new utility that converts an HDF4 file to an 
-    HDF5 file.  For details, see the document, "Mapping HDF4 Objects to 
+    The h4toh5 utility is a new utility that converts an HDF4 file to an
+    HDF5 file.  For details, see the document, "Mapping HDF4 Objects to
     HDF5 Objects":
        http://hdf.ncsa.uiuc.edu/HDF5/papers/H4-H5MappingGuidelines.pdf
 
     Known Bugs:
 
       The h4toh5 utility produces images that do not correctly conform
-      to the HDF5 Image and Palette Specification. 
+      to the HDF5 Image and Palette Specification.
 
         http://hdf.ncsa.uiuc.edu/HDF5/doc/ImageSpec.html
 
-      Several required HDF5 attributes are omitted, and the dataspace 
-      is reversed (i.e., the ht. and width of the image dataset is 
+      Several required HDF5 attributes are omitted, and the dataspace
+      is reversed (i.e., the ht. and width of the image dataset is
       incorrectly described.)  For more information, please see:
 
         http://hdf.ncsa.uiuc.edu/HDF5/H5Image/ImageDetails.html
- 
+
       This bug has been fixed for the snapshot of hdf5 1.4 release. March 12th,2001
 
     Known Limitations of the h4toh5 release
@@ -7555,7 +7555,7 @@ h4toh5 Utility
          be an H5T_INTEGER type.
        * For attributes of any HDF4 object, data of type 'DFNT_CHAR8'
          will be converted to an HDF5 'H5T_STRING' type.
-       * For an HDF4 Vdata, it is difficult to determine whether data 
+       * For an HDF4 Vdata, it is difficult to determine whether data
          of type 'DFNT_CHAR8' is intended to be bytes or characters. The
          h4toh5 utility will consider them to be C characters, and will
          convert them to an HDF5 'H5T_STRING' type.
@@ -7569,10 +7569,10 @@ h4toh5 Utility
     with analogous chunked storage.
 
     An HDF4 object that uses compression will be converted to an
-    uncompressed HDF5 object.  
+    uncompressed HDF5 object.
 
     An HDF4 object that uses external storage will be converted to an
-    HDF5 object without external storage.  
+    HDF5 object without external storage.
 
     4. Memory Use
 
@@ -7589,29 +7589,29 @@ h4toh5 Utility
 
     The h4toh5 utility requires HDF5-1.4.0 and HDF4r1.4
 
-    h4toh5 utility has been tested on all platforms listed below (see 
+    h4toh5 utility has been tested on all platforms listed below (see
     section "Platforms Tested") except TFLOPS.
 
- 
+
 F90 Support
 ===========
-    This is the first release of the HDF5 Library with fully integrated 
-    F90 API support.  The Fortran Library is created when the 
+    This is the first release of the HDF5 Library with fully integrated
+    F90 API support.  The Fortran Library is created when the
     --enable-fortran flag is specified during configuration.
 
-    Not all F90 subroutines are implemented. Please refer to the HDF5 
+    Not all F90 subroutines are implemented. Please refer to the HDF5
     Reference Manual for more details.
-   
-    F90 APIs are available for the Solaris 2.6 and 2.7, Linux, DEC UNIX, 
-    T3E, SV1 and O2K (64 bit option only) platforms. The Parallel version of 
+
+    F90 APIs are available for the Solaris 2.6 and 2.7, Linux, DEC UNIX,
+    T3E, SV1 and O2K (64 bit option only) platforms. The Parallel version of
     the HDF5 F90 Library is supported on the O2K and T3E platforms.
 
     Changes since the last prototype release (July 2000)
     ----------------------------------------------------
-       * h5open_f and h5close_f must be called instead of h5init_types and 
+       * h5open_f and h5close_f must be called instead of h5init_types and
          h5close_types.
 
-       * The following subroutines are no longer available: 
+       * The following subroutines are no longer available:
 
              h5pset_xfer_f
              h5pget_xfer_f
@@ -7625,45 +7625,45 @@ F90 Support
              h5pget_core_f
              h5pset_family_f
              h5pget_family_f
-             
+
        * The following functions have been added:
 
              h5pset_fapl_mpio_f
              h5pget_fapl_mpio_f
              h5pset_dxpl_mpio_f
              h5pget_dxpl_mpio_f
-        
-       * In the previous HDF5 F90 releases, the implementation of object 
-         references and dataset region references was not portable. This 
-         release introduces a portable implementation, but it also introduces 
-         changes to the read/write APIs that handle references.  If object or 
-         dataset region references are written or read to/from an HDF5 file, 
-         h5dwrite_f and h5dread_f must use the extra parameter, n, for the 
+
+       * In the previous HDF5 F90 releases, the implementation of object
+         references and dataset region references was not portable. This
+         release introduces a portable implementation, but it also introduces
+         changes to the read/write APIs that handle references.  If object or
+         dataset region references are written or read to/from an HDF5 file,
+         h5dwrite_f and h5dread_f must use the extra parameter, n, for the
          buffer size:
 
             h5dwrite(read)_f(dset_id, mem_type_id, buf, n, hdferr, &
-                                                       ^^^ 
+                                                       ^^^
                              mem_space_id, file_space_id, xfer_prp)
 
-         For other datatypes the APIs were not changed. 
-              
-             
+         For other datatypes the APIs were not changed.
+
+
 C++ Support
 ===========
-    This is the first release of the HDF5 Library with fully integrated 
+    This is the first release of the HDF5 Library with fully integrated
     C++ API support. The HDF5 C++ library is built when the --enable-cxx
     flag is specified during configuration.
 
     Check the HDF5 Reference Manual for available C++ documentation.
 
-    C++ APIs are available for Solaris 2.6 and 2.7, Linux, and FreeBSD. 
+    C++ APIs are available for Solaris 2.6 and 2.7, Linux, and FreeBSD.
 
 
 Pablo Support
 =============
     This version does not allow proper building of the Pablo-instrumented
     version of the library.  A version supporting the pablo build is
-    available on the Pablo Website at 
+    available on the Pablo Website at
     www-pablo.cs.uiuc.edu/pub/Pablo.Release.5/HDFLibrary/hdf5_v1.4.tar.gz
 
 
@@ -7724,7 +7724,7 @@ Library
 Configuration
 -------------
    * The hdf5.h include file was fixed to allow the HDF5 Library to be
-     compiled with other libraries/applications that use GNU autoconf. 
+     compiled with other libraries/applications that use GNU autoconf.
    * Configuration for parallel HDF5 was improved. Configure now attempts
      to link with libmpi.a and/or libmpio.a as the MPI libraries by
      default. It also uses "mpirun" to launch MPI tests by default. It
@@ -7774,14 +7774,14 @@ Tools
    * h5dump correctly displays the committed copy of predefined types
      correctly.
    * Added an option, -V, to show the version information of h5dump.
-   * Fixed a core dumping bug of h5toh4 when executed on platforms like 
+   * Fixed a core dumping bug of h5toh4 when executed on platforms like
      TFLOPS.
    * The test script for h5toh4 used to not able to detect the hdp
      dumper command was not valid.  It now detects and reports the
      failure of hdp execution.
    * Merged the tools with the 1.2.2 branch. Required adding new
      macros, VERSION12 and VERSION13, used in conditional compilation.
-     Updated the Windows project files for the tools.            
+     Updated the Windows project files for the tools.
    * h5dump displays opaque and bitfield data correctly.
    * h5dump and h5ls can browse files created with the Stream VFD
      (eg. "h5ls <hostname>:<port>").
@@ -7794,10 +7794,10 @@ Tools
 
 Bug Fixes since HDF5-1.4.0-beta2
 ================================
-   * Fixed a bug in the conversion from a little endian double to a big 
+   * Fixed a bug in the conversion from a little endian double to a big
      endian float in some special cases.
-   * Corrected configuration error which was not including compression 
-     support correctly. 
+   * Corrected configuration error which was not including compression
+     support correctly.
    * Cleaned up lots of warnings.
    * Changed a few h5dump command line switches and added long versions of
      the switches.
@@ -7806,7 +7806,7 @@ Bug Fixes since HDF5-1.4.0-beta2
    * Fixed fairly obscure bug in hyperslab I/O which could (in rare cases)
      not copy all the data during a transfer.
    * Removed ragged array code from library.
-   * F90 library and module files are installed properly now on all supported 
+   * F90 library and module files are installed properly now on all supported
      platforms.
 
 
@@ -7822,26 +7822,26 @@ Bug Fixes since HDF5-1.4.0 Release
 
 Documentation
 =============
-   * A new document summarizing the changes in the library leading up to 
-     the current release has been added: 
+   * A new document summarizing the changes in the library leading up to
+     the current release has been added:
            HDF5 Software Changes from Release to Release
-     This document is in the Application Developer's Guide and is of 
-     particular interest to developers who must keep an application 
+     This document is in the Application Developer's Guide and is of
+     particular interest to developers who must keep an application
      synchronized with the library.
    * The documentation for the Fortran90 and C++ APIs is linked to the
-     opening page of the Reference Manual.  Fortran90 functions are 
+     opening page of the Reference Manual.  Fortran90 functions are
      individually referenced from the corresponding C functions through-
      out the Reference Manual.
-   * User's Guide and Reference Manual were updated to reflect changed 
-     function syntax and to fix reported bugs. 
-   * Functions that are new at this release were added to the Reference 
-     Manual.  
-   * Functions that have been removed from the library were removed from 
+   * User's Guide and Reference Manual were updated to reflect changed
+     function syntax and to fix reported bugs.
+   * Functions that are new at this release were added to the Reference
+     Manual.
+   * Functions that have been removed from the library were removed from
      the User's Guide and the Reference Manual.
-   * PostScript and PDF versions of the Release 1.4 document set are 
+   * PostScript and PDF versions of the Release 1.4 document set are
      not available at the time of Release 1.4.0.
 
-   
+
 Platforms Tested
 ================
     AIX 4.3.3.0 (IBM SP powerpc)  xlc 3.6.6
@@ -7865,7 +7865,7 @@ Platforms Tested
                                   mpich-1.2.1
     OSF1 V4.0                     DEC-V5.2-040
                                   Digital Fortran 90 V4.1-270
-    SunOS 5.6                     WorkShop Compilers 5.0 98/12/15 C 5.0 
+    SunOS 5.6                     WorkShop Compilers 5.0 98/12/15 C 5.0
     (Solaris 2.6)                 WorkShop Compilers 5.0 99/10/25 Fortran 90
                                          2.0 Patch 107356-04
                                   Workshop Compilers 5.0 98/12/15 C++ 5.0
@@ -7874,7 +7874,7 @@ Platforms Tested
                                          2.0 Patch 107356-04
                                   Workshop Compilers 5.0 98/12/15 C++ 5.0
                                   mpich-1.2.1
-    SunOS 5.5.1                   gcc-2.7.2 
+    SunOS 5.5.1                   gcc-2.7.2
      (Solaris 2.5.1 (x86))
     TFLOPS r1.0.4 v4.0            mpich-1.2.1 with local changes
     Windows NT4.0, 2000 (NT5.0)   MSVC++ 6.0
@@ -7931,17 +7931,17 @@ Supported Configuration Features Summary
 
     Footnotes:  (1) Using mpich.
                 (2) Using mpt and mpich.
-                (3) When configured with static-exec enabled, tests fail 
+                (3) When configured with static-exec enabled, tests fail
                     in serial mode.
                 (4) No HDF4-related tools.
 
 
 Known Problems
 ==============
-   * The stream-vfd test uses ip port 10007 for testing.  If another 
-     application is already using that port address, the test will hang 
-     indefinitely and has to be terminated by the kill command.  To try the 
-     test again, change the port address in test/stream_test.c to one not 
+   * The stream-vfd test uses ip port 10007 for testing.  If another
+     application is already using that port address, the test will hang
+     indefinitely and has to be terminated by the kill command.  To try the
+     test again, change the port address in test/stream_test.c to one not
      being used in the host.
 
    * The --enable-static-exec configure flag fails to compile for Solaris
@@ -7950,7 +7950,7 @@ Known Problems
 
      The --enable-static-exec configure flag also fails to correctly compile
      on Linux platforms using the gcc-2.95.2 compiler.
-   
+
      The --enable-static-exec configure flag also fails to correctly compile
      on IBM SP2 platform for the serial mode.  The parallel mode works fine
      with this option.
@@ -7959,7 +7959,7 @@ Known Problems
 
      The executable files in hdf5/bin are dynamic-linked for IRIX64 6.5(64 and
      n32 modes) and IRIX 6.5, even though they are compiled with static library.
-  
+
      It is suggested that you don't use this option on these platforms
      during configuration.
 
@@ -7971,10 +7971,10 @@ Known Problems
      able to handle the `long long' datatype with the warning:
 
            warning: ANSI C does not support `long long'
-  
+
      This warning is innocuous and can be safely ignored.
 
-   * SunOS 5.6 with C WorkShop Compilers 4.2:  Hyperslab selections will 
+   * SunOS 5.6 with C WorkShop Compilers 4.2:  Hyperslab selections will
      fail if library is compiled using optimization of any level.
 
    * When building hdf5 tools and applications on windows platform, a linking
@@ -7982,8 +7982,8 @@ Known Problems
      on debug version when running VC++6.0. This warning doesn't affect building
      and testing hdf5 applications. We will continue investigating this.
 
-   * h5toh4 converter fails two cases(tstr.h5 and tmany.h5) for release dll 
-     version on windows 2000 and NT.  The reason is possibly due to Windows NT 
+   * h5toh4 converter fails two cases(tstr.h5 and tmany.h5) for release dll
+     version on windows 2000 and NT.  The reason is possibly due to Windows NT
      DLL convention on freeing memory. It seems that memory cannot be freed
      across library or DLL. It is still under investigation.
 
@@ -7991,7 +7991,7 @@ Known Problems
      the configured with --with-gass.
 
    * HDF-SRB testing got segmentation error on Solaris 2.7.
-    
+
    * The Stream VFD was not tested yet under Windows.
      It is not supported in the TFLOPS machine.
 
@@ -8006,7 +8006,7 @@ Known Problems
 
    * Certain platforms give false negatives when testing h5ls:
        - Solaris x86 2.5.1, Cray T3E and Cray J90 give errors during testing
-         when displaying object references in certain files.  These are benign 
+         when displaying object references in certain files.  These are benign
          differences due to the difference in sizes of the objects created on
          those platforms.  h5ls appears to be dumping object references
          correctly.
@@ -8015,18 +8015,18 @@ Known Problems
          different precision in the values displayed and h5ls appears to be
          dumping floating-point numbers correctly.
 
-   * Before building HDF5 F90 Library from source on Crays (T3E and SV1) 
-     replace H5Aff.f90, H5Dff.f90 and H5Pff.f90 files in the fortran/src 
-     subdirectory in the top level directory with the Cray-specific files from 
+   * Before building HDF5 F90 Library from source on Crays (T3E and SV1)
+     replace H5Aff.f90, H5Dff.f90 and H5Pff.f90 files in the fortran/src
+     subdirectory in the top level directory with the Cray-specific files from
      the ftp://ftp.ncsa.uiuc.edu/HDF/HDF5/hdf5-1.4.0/src/crayf90/  directory.
 
    * The h4toh5 utility produces images that do not correctly conform
-     to the HDF5 Image and Palette Specification. 
+     to the HDF5 Image and Palette Specification.
 
          http://hdf.ncsa.uiuc.edu/HDF5/doc/ImageSpec.html
 
-     Several required HDF5 attributes are omitted, and the dataspace 
-     is reversed (i.e., the ht. and width of the image dataset is 
+     Several required HDF5 attributes are omitted, and the dataspace
+     is reversed (i.e., the ht. and width of the image dataset is
      incorrectly described.)  For more information, please see:
 
          http://hdf.ncsa.uiuc.edu/HDF5/H5Image/ImageDetails.htm
@@ -8037,17 +8037,17 @@ Known Problems
 =================================================================
 INTRODUCTION
 
-This document describes the differences between HDF5-1.2.1 and 
+This document describes the differences between HDF5-1.2.1 and
 HDF5-1.2.2, and contains information on the platforms where HDF5-1.2.2
-was tested and known problems in HDF5-1.2.2. 
+was tested and known problems in HDF5-1.2.2.
 
-The HDF5 documentation can be found on the NCSA ftp server 
+The HDF5 documentation can be found on the NCSA ftp server
 (ftp.ncsa.uiuc.edu) in the directory:
 
      /HDF/HDF5/docs/
 
 For more information look at the HDF5 home page at:
-   
+
     http://hdf.ncsa.uiuc.edu/HDF5/
 
 If you have any questions or comments, please send them to:
@@ -8057,7 +8057,7 @@ If you have any questions or comments, please send them to:
 
 CONTENTS
 
-- Features Added since HDF5-1.2.1 
+- Features Added since HDF5-1.2.1
 - Bug Fixes since HDF5-1.2.1
 - Known Problems
 - Platforms Tested
@@ -8108,10 +8108,10 @@ Bug Fixes since HDF5-1.2.1
 Known Problems
 ==============
 
-o SunOS 5.6 with C WorkShop Compilers 4.2:  hyperslab selections will 
+o SunOS 5.6 with C WorkShop Compilers 4.2:  hyperslab selections will
   fail if library is compiled using optimization of any level.
 o TFLOPS: dsets test fails if compiled with optimization turned on.
-o J90: tools fail to dispay data for the datasets with a compound datatype. 
+o J90: tools fail to dispay data for the datasets with a compound datatype.
 
 Platforms Tested
 ================
@@ -8125,13 +8125,13 @@ Platforms Tested
                                 mpt.1.3
   FreeBSD 4.0                   gcc 2.95.2
   HP-UX B.10.20                 HP C  HP92453-01 A.10.32
-  HP-UX B.11.00                 HP92453-01 A.11.00.13 HP C Compiler 
-                                (static library only, h5toh4 tool is not available) 
+  HP-UX B.11.00                 HP92453-01 A.11.00.13 HP C Compiler
+                                (static library only, h5toh4 tool is not available)
   IRIX 6.5                      MIPSpro cc 7.30
   IRIX64 6.5 (64 & n32)         MIPSpro cc 7.3.1m
                                 mpt.1.4
 
-  Linux 2.2.10 SMP              gcc 2.95.1 
+  Linux 2.2.10 SMP              gcc 2.95.1
                                 mpicc(gcc-2.95.1)
                                 gcc (egcs-2.91.66)
                                 mpicc (egcs-2.91.66)
@@ -8162,7 +8162,7 @@ Configuration
 -------------
 
    * The hdf5.h include file was fixed to allow the HDF5 Library to be compiled
-     with other libraries/applications that use GNU autoconf. 
+     with other libraries/applications that use GNU autoconf.
    * Configuration for parallel HDF5 was improved. Configure now attempts to
      link with libmpi.a and/or libmpio.a as the MPI libraries by default.
      It also uses "mpirun" to launch MPI tests by default.  It tests to
@@ -8195,7 +8195,7 @@ Tools
 ------
 
    * Added an option, -V, to show the version information of h5dump.
-   * Fixed a core dumping bug of h5toh4 when executed on platforms like 
+   * Fixed a core dumping bug of h5toh4 when executed on platforms like
      TFLOPS.
    * The test script for h5toh4 used to not able to detect the hdp
      dumper command was not valid.  It now detects and reports the
@@ -8204,10 +8204,10 @@ Tools
 Documentation
 -------------
 
-   * User's Guide and Reference Manual were updated. 
-     See doc/html/PSandPDF/index.html for more details. 
+   * User's Guide and Reference Manual were updated.
+     See doc/html/PSandPDF/index.html for more details.
+
 
-   
 Platforms Tested:
 ================
 Note: Due to the nature of bug fixes, only static versions of the library and tools were tested.
@@ -8224,7 +8224,7 @@ Note: Due to the nature of bug fixes, only static versions of the library and to
 
   Linux 2.2.10 SuSE             egcs-2.91.66               configured with
   (i686-pc-linux-gnu)                                      --disable-hsizet
-                                mpich-1.2.0 egcs-2.91.66 19990314/Linux 
+                                mpich-1.2.0 egcs-2.91.66 19990314/Linux
 
   OSF1 V4.0                     DEC-V5.2-040
   SunOS 5.6                     cc WorkShop Compilers 4.2  no optimization
@@ -8236,13 +8236,13 @@ Note: Due to the nature of bug fixes, only static versions of the library and to
 Known Problems:
 ==============
 
-o SunOS 5.6 with C WorkShop Compilers 4.2:  Hyperslab selections will 
+o SunOS 5.6 with C WorkShop Compilers 4.2:  Hyperslab selections will
   fail if library is compiled using optimization of any level.
 
 
 
 %%%%1.2.0%%%%   Release Information for hdf5-1.2.0
-         
+
 5. Release Information for hdf5-1.2.0
 ===================================================================
 
@@ -8254,13 +8254,13 @@ applicable, are systems that HDF5 1.2.0 was tested on.
 
                            Compiler & libraries
   Platform                      Information              Comment
-  --------                      ----------               -------- 
-                                
+  --------                      ----------               --------
+
   AIX 4.3.2 (IBM SP)            3.6.6
 
   Cray J90 10.0.0.6             cc 6.3.0.0
 
-  Cray T3E 2.0.4.61             cc 6.2.1.0 
+  Cray T3E 2.0.4.61             cc 6.2.1.0
                                 mpt.1.3
 
   FreeBSD 3.2                   gcc 2.95.1
@@ -8268,7 +8268,7 @@ applicable, are systems that HDF5 1.2.0 was tested on.
   HP-UX B.10.20                 HP C  HP92453-01 A.10.32
                                 gcc 2.8.1
 
-  IRIX 6.5                      MIPSpro cc 7.30 
+  IRIX 6.5                      MIPSpro cc 7.30
 
   IRIX64 6.5 (64 & n32)         MIPSpro cc 7.3.1m
   			        mpt.1.3 (SGI MPI 3.2.0.0)
@@ -8279,19 +8279,19 @@ applicable, are systems that HDF5 1.2.0 was tested on.
 
   OSF1 V4.0                     DEC-V5.2-040
 
-  SunOS 5.6                     cc WorkShop Compilers 4.2   
+  SunOS 5.6                     cc WorkShop Compilers 4.2
                                                            no optimization
   			        gcc 2.8.1
 
   SunOS 5.7                     cc WorkShop Compilers 5.0
                                 gcc 2.8.1
- 
+
   TFLOPS 2.7.1                  cicc (pgcc Rel 3.0-4i)
   			        mpich-1.1.2 with local changes
 
   Windows NT4.0 intel           MSVC++ 5.0 and 6.0
 
-  Windows NT alpha 4.0          MSVC++ 5.0 
+  Windows NT alpha 4.0          MSVC++ 5.0
 
   Windows 98                    MSVC++ 5.0
 
@@ -8306,7 +8306,7 @@ B. Known Problems
   Hyperslab selections will fail if library is compiled using optimization
   of any level.
 
- 
+
 C. Changes Since Version 1.0.1
    ---------------------------
 
@@ -8320,7 +8320,7 @@ C. Changes Since Version 1.0.1
 * Self-contained documentation for installations isolated from the
   Internet.
 
-* HDF5 Tutorial was added to the documentation  
+* HDF5 Tutorial was added to the documentation
 
 2. Configuration
    -------------
@@ -8352,7 +8352,7 @@ C. Changes Since Version 1.0.1
 
 * Optimizations to compound datatype conversions and I/O operations.
 
-* Added nearly 100 optimized conversion functions for native datatypes 
+* Added nearly 100 optimized conversion functions for native datatypes
   including support for non-aligned data.
 
 * Added support for bitfield, opaque, and enumeration types.
@@ -8404,23 +8404,23 @@ C. Changes Since Version 1.0.1
 * Improved the algorithm that translates an HDF5 hyperslab selection
   into an MPI type for better collective I/O performance.
 
-8. New API functions 
+8. New API functions
    -----------------
 
   a. Property List Interface:
      ------------------------
 
   H5Pset_xfer		- set data transfer properties
-  H5Pset_preserve      - set dataset transfer property list status 
+  H5Pset_preserve      - set dataset transfer property list status
   H5Pget_preserve      - get dataset transfer property list status
   H5Pset_hyper_cache   - indicates whether to cache hyperslab blocks during I/O
-  H5Pget_hyper_cache   - returns information regarding the caching of 
+  H5Pget_hyper_cache   - returns information regarding the caching of
                          hyperslab blocks during I/O
-  H5Pget_btree_ratios  - sets B-tree split ratios for a dataset 
+  H5Pget_btree_ratios  - sets B-tree split ratios for a dataset
                          transfer property list
   H5Pset_btree_ratios  - gets B-tree split ratios for a dataset
                          transfer property list
-  H5Pset_vlen_mem_manager - sets the memory manager for variable-length 
+  H5Pset_vlen_mem_manager - sets the memory manager for variable-length
                             datatype allocation
   H5Pget_vlen_mem_manager - sets the memory manager for variable-length
                             datatype allocation
@@ -8435,26 +8435,26 @@ C. Changes Since Version 1.0.1
   c. Dataspace Interface:
      --------------------
   H5Sget_select_hyper_nblocks   - get number of hyperslab blocks
-  H5Sget_select_hyper_blocklist - get the list of hyperslab blocks 
+  H5Sget_select_hyper_blocklist - get the list of hyperslab blocks
                                   currently selected
-  H5Sget_select_elem_npoints    - get the number of element points 
+  H5Sget_select_elem_npoints    - get the number of element points
                                   in the current selection
-  H5Sget_select_elem_pointlist  - get the list of element points 
+  H5Sget_select_elem_pointlist  - get the list of element points
                                   currently selected
-  H5Sget_select_bounds          - gets the bounding box containing 
+  H5Sget_select_bounds          - gets the bounding box containing
                                   the current selection
 
   d. Datatype Interface:
      -------------------
-  H5Tget_super         - return the base datatype from which a 
+  H5Tget_super         - return the base datatype from which a
                          datatype is derived
   H5Tvlen_create       - creates a new variable-length dataype
   H5Tenum_create       - creates a new enumeration datatype
   H5Tenum_insert       - inserts a new enumeration datatype member
-  H5Tenum_nameof       - returns the symbol name corresponding to a 
+  H5Tenum_nameof       - returns the symbol name corresponding to a
+                         specified member of an enumeration datatype
+  H5Tvalueof           - return the value corresponding to a
                          specified member of an enumeration datatype
-  H5Tvalueof           - return the value corresponding to a 
-                         specified member of an enumeration datatype 
   H5Tget_member_value  - return the value of an enumeration datatype member
   H5Tset_tag           - tags an opaque datatype
   H5Tget_tag           - gets the tag associated with an opaque datatype
@@ -8468,7 +8468,7 @@ C. Changes Since Version 1.0.1
   H5Rcreate            - creates a reference
   H5Rdereference       - open the HDF5 object referenced
   H5Rget_region        - retrieve a dataspace with the specified region selected
-  H5Rget_object_type   - retrieve the type of object that an 
+  H5Rget_object_type   - retrieve the type of object that an
                          object reference points to
 
   g. Ragged Arrays (alpha) (names of those API functions were changed):
@@ -8486,7 +8486,7 @@ C. Changes Since Version 1.0.1
 * Enhancements to the h5ls tool including the ability to list objects
   from more than one file, to display raw hexadecimal data, to
   show file addresses for raw data, to format output more reasonably,
-  to show object attributes, and to perform a recursive listing, 
+  to show object attributes, and to perform a recursive listing,
 
 * Enhancements to h5dump: support new data types added since previous
   versions.
@@ -8496,7 +8496,7 @@ C. Changes Since Version 1.0.1
 
 
 %%%%1.0.1%%%%   Release Information for hdf5-1.0.1
-         
+
 4.  Changes from Release 1.0.0 to Release 1.0.1
 =====================================================================
 
@@ -8506,7 +8506,7 @@ C. Changes Since Version 1.0.1
 * [Bug-Fix]: Configure failed for all IRIX versions other than 6.3.
   It now configures correctly for all IRIX 6.x version.
 
-* Released Parallel HDF5 
+* Released Parallel HDF5
 
      Supported Features:
      ------------------
@@ -8526,7 +8526,7 @@ C. Changes Since Version 1.0.1
      IBM SP2
      SGI Origin 2000
 
-     Changes In This Release: 
+     Changes In This Release:
      -----------------------
 
    o Support of Access to Extendable Dimension Datasets.
@@ -8570,7 +8570,7 @@ C. Changes Since Version 1.0.1
 ====================================================================
 
 * Added fill values for datasets.  For contiguous datasets fill value
-  performance may be quite poor since the fill value is written to the 
+  performance may be quite poor since the fill value is written to the
   entire dataset when the dataset is created.  This will be remedied
   in a future version.  Chunked datasets using fill values do not
   incur any additional overhead. See H5Pset_fill_value().
@@ -8621,17 +8621,17 @@ C. Changes Since Version 1.0.1
 
 %%%%1.0.0 Alpha 2%%%%   Release Information for hdf5-1.0.0 Alpha 2
 
-1.  Changes from the First Alpha 1.0.0 Release to 
+1.  Changes from the First Alpha 1.0.0 Release to
      the Second Alpha 1.0.0 Release
 =====================================================================
 
 * Two of the packages have been renamed.  The data space API has been
-  renamed from `H5P' to `H5S' and the property list (template) API has 
+  renamed from `H5P' to `H5S' and the property list (template) API has
   been renamed from `H5C' to `H5P'.
 
-* The new attribute API `H5A' has been added.  An attribute is a small 
+* The new attribute API `H5A' has been added.  An attribute is a small
   dataset which can be attached to some other object (for instance, a
-  4x4 transformation matrix attached to a 3-dimensional dataset, or an 
+  4x4 transformation matrix attached to a 3-dimensional dataset, or an
   English abstract attached to a group).
 
 * The error handling API `H5E' has been completed.  By default, when an
@@ -8643,7 +8643,7 @@ C. Changes Since Version 1.0.1
 * Support for large files and datasets (>2GB) has been added.  There
   is an html document that describes how it works.  Some of the types
   for function arguments have changed to support this: all arguments
-  pertaining to sizes of memory objects are `size_t' and all arguments 
+  pertaining to sizes of memory objects are `size_t' and all arguments
   pertaining to file sizes are `hsize_t'.
 
 * More data type conversions have been added although none of them are
@@ -8669,7 +8669,7 @@ C. Changes Since Version 1.0.1
 * Data types can be stored in the file as independent objects and
   multiple datasets can share a data type.
 
-* The raw data I/O stream has been implemented and the application can 
+* The raw data I/O stream has been implemented and the application can
   control meta and raw data caches, so I/O performance should be
   improved from the first alpha release.
 
@@ -8681,14 +8681,14 @@ C. Changes Since Version 1.0.1
   applications or I/O libraries and described and accessed through
   HDF5.
 
-* Hard and soft (symbolic) links are implemented which allow groups to 
+* Hard and soft (symbolic) links are implemented which allow groups to
   share objects. Dangling and recursive symbolic links are supported.
 
 * User-defined data compression is implemented although we may
   generalize the interface to allow arbitrary user-defined filters
   which can be used for compression, checksums, encryption,
   performance monitoring, etc.  The publicly-available `deflate'
-  method is predefined if the GNU libz.a can be found at configuration 
+  method is predefined if the GNU libz.a can be found at configuration
   time.
 
 * The configuration scripts have been modified to make it easier to
@@ -8786,16 +8786,16 @@ Property Lists
    H5Pset_mpi		- set MPI-IO properties
    H5Pget_xfer		- get data transfer properties
  + H5Pset_xfer		- set data transfer properties
- + H5Pset_preserve      - set dataset transfer property list status 
+ + H5Pset_preserve      - set dataset transfer property list status
  + H5Pget_preserve      - get dataset transfer property list status
  + H5Pset_hyper_cache   - indicates whether to cache hyperslab blocks during I/O
- + H5Pget_hyper_cache   - returns information regarding the caching of 
+ + H5Pget_hyper_cache   - returns information regarding the caching of
                           hyperslab blocks during I/O
- + H5Pget_btree_ratios  - sets B-tree split ratios for a dataset 
+ + H5Pget_btree_ratios  - sets B-tree split ratios for a dataset
                           transfer property list
  + H5Pset_btree_ratios  - gets B-tree split ratios for a dataset
                           transfer property list
- + H5Pset_vlen_mem_manager - sets the memory manager for variable-length 
+ + H5Pset_vlen_mem_manager - sets the memory manager for variable-length
                              datatype allocation
  + H5Pget_vlen_mem_manager - sets the memory manager for variable-length
                              datatype allocation
@@ -8885,13 +8885,13 @@ Dataspaces
    H5Soffset_simple	- set selection offset
    H5Sselect_valid	- determine if selection is valid for extent
  + H5Sget_select_hyper_nblocks   - get number of hyperslab blocks
- + H5Sget_select_hyper_blocklist - get the list of hyperslab blocks 
+ + H5Sget_select_hyper_blocklist - get the list of hyperslab blocks
                                    currently selected
- + H5Sget_select_elem_npoints    - get the number of element points 
+ + H5Sget_select_elem_npoints    - get the number of element points
                                    in the current selection
- + H5Sget_select_elem_pointlist  - get the list of element points 
+ + H5Sget_select_elem_pointlist  - get the list of element points
                                    currently selected
- + H5Sget_select_bounds          - gets the bounding box containing 
+ + H5Sget_select_bounds          - gets the bounding box containing
                                    the current selection
 
 Datatypes
@@ -8942,15 +8942,15 @@ Datatypes
    H5Tset_sign		- set integer sign type
    H5Tset_size		- set size in bytes
    H5Tset_strpad	- set string padding
- + H5Tget_super         - return the base datatype from which a 
+ + H5Tget_super         - return the base datatype from which a
                           datatype is derived
  + H5Tvlen_create       - creates a new variable-length dataype
  + H5Tenum_create       - creates a new enumeration datatype
  + H5Tenum_insert       - inserts a new enumeration datatype member
- + H5Tenum_nameof       - returns the symbol name corresponding to a 
+ + H5Tenum_nameof       - returns the symbol name corresponding to a
+                          specified member of an enumeration datatype
+ + H5Tvalueof           - return the value corresponding to a
                           specified member of an enumeration datatype
- + H5Tvalueof           - return the value corresponding to a 
-                          specified member of an enumeration datatype 
  + H5Tget_member_value  - return the value of an enumeration datatype member
  + H5Tset_tag           - tags an opaque datatype
  + H5Tget_tag           - gets the tag associated with an opaque datatype
@@ -8959,10 +8959,10 @@ Datatypes
  - H5Tregister_soft	- register general type conversion function
 
 Filters
-   H5Tregister		- register a conversion function 
+   H5Tregister		- register a conversion function
 
 Compression
-   H5Zregister		- register new compression and uncompression 
+   H5Zregister		- register new compression and uncompression
                           functions for a method specified by a method number
 
 Identifiers
@@ -8972,7 +8972,7 @@ References
  + H5Rcreate            - creates a reference
  + H5Rdereference       - open the HDF5 object referenced
  + H5Rget_region        - retrieve a dataspace with the specified region selected
- + H5Rget_object_type   - retrieve the type of object that an 
+ + H5Rget_object_type   - retrieve the type of object that an
                           object reference points to
 
 Ragged Arrays (alpha)
diff --git a/release_docs/HISTORY-1_10.txt b/release_docs/HISTORY-1_10.txt
index ad8beb2..2ddbe7a 100644
--- a/release_docs/HISTORY-1_10.txt
+++ b/release_docs/HISTORY-1_10.txt
@@ -7,7 +7,7 @@ This file contains development history of the HDF5 1.10 branch
 05.      Release Information for hdf5-1.10.3
 04.      Release Information for hdf5-1.10.2
 03.      Release Information for hdf5-1.10.1
-02.      Release Information for hdf5-1.10.0-patch1 
+02.      Release Information for hdf5-1.10.0-patch1
 01.      Release Information for hdf5-1.10.0
 
 [Search on the string '%%%%' for section breaks of each release.]
@@ -134,7 +134,7 @@ Bug Fixes since HDF5-1.10.3 release
     Java Library:
     ----------------
     - JNI native library dependencies
-    
+
       The build for the hdf5_java native library used the wrong
       hdf5 target library for CMake builds. Correcting the hdf5_java
       library to build with the shared hdf5 library required testing
@@ -291,7 +291,7 @@ The following platforms are not supported but have been tested for this release.
     #1 SMP x86_64 GNU/Linux          Version 4.8.5 20150623 (Red Hat 4.8.5-4)
     (jelly)                       with NAG Fortran Compiler Release 6.1(Tozai)
                                   GCC Version 7.1.0
-                                  OpenMPI 3.0.0-GCC-7.2.0-2.29, 
+                                  OpenMPI 3.0.0-GCC-7.2.0-2.29,
                                      3.1.0-GCC-7.2.0-2.29
                                   Intel(R) C (icc) and C++ (icpc) compilers
                                      Version 17.0.0.098 Build 20160721
@@ -3204,7 +3204,7 @@ This release supports the following features:
 
     - Version 3 Metadata Cache
 
-      The version 3 metadata cache moves management of metadata I/O from 
+      The version 3 metadata cache moves management of metadata I/O from
       the clients to the metadata cache proper.  This change is essential for
       SWMR and other features that have yet to be released.
 
@@ -3265,7 +3265,7 @@ This release supports the following features:
     - New Public Functions: H5PTget_dataset and H5PTget_type
 
       Two accessor functions have been added. H5PTget_dataset returns
-      the identifier of the dataset associated with the packet table, 
+      the identifier of the dataset associated with the packet table,
       and H5PTget_type returns the identifier of the datatype used by
       the packet table.
 
@@ -3391,28 +3391,28 @@ Issues Addressed in this Release Since 1.10.0
 
      - Configure fails to detect valid real KINDs on FreeBSD 9.3 (i386) with Fortran enabled.
 
-       Fixed. Added the exponential option to SELECTED_REAL_KIND to distinguish 
+       Fixed. Added the exponential option to SELECTED_REAL_KIND to distinguish
        KINDs of same precision
        (MSB - 2016/05/14,HDFFV-9912)
 
 
      - Corrected the f90 H5AWRITE_F integer interface's buf to be INTENT(IN).
-       (MSB - 2016/05/14) 
+       (MSB - 2016/05/14)
 
      - Configure fails in sed command on FreeBSD 9.3 (i386) with Fortran enabled.
-  
+
        Fixed.
        (MSB - 2016/05/14,HDFFV-9912)
 
      - Compile time error in H5f90global.F90 with IBM XL Fortran 14.1.0.13 on BG/Q with Fortran
        enabled.
-    
+
        Fixed.
        (MSB - 2016/05/16,HDFFV-9917)
 
      - A cmake build with Fortran enabled does not install module h5fortkit
 
-       Fixed. 
+       Fixed.
        (MSB - 2016/05/23,HDFFV-9923)
 
 
@@ -3916,7 +3916,7 @@ This release supports the following features:
 
     - Version 3 Metadata Cache
 
-      The version 3 metadata cache moves management of metadata I/O from 
+      The version 3 metadata cache moves management of metadata I/O from
       the clients to the metadata cache proper.  This change is essential for
       SWMR and other features that have yet to be released.
 
@@ -3977,7 +3977,7 @@ This release supports the following features:
     - New Public Functions: H5PTget_dataset and H5PTget_type
 
       Two accessor functions have been added. H5PTget_dataset returns
-      the identifier of the dataset associated with the packet table, 
+      the identifier of the dataset associated with the packet table,
       and H5PTget_type returns the identifier of the datatype used by
       the packet table.
 
@@ -4378,16 +4378,16 @@ known issues if it is a new issue.
  - When building HDF5 with Java using CMake and specifying Debug for CMAKE_BUILD_TYPE,
    there is a missing command argument for the tests of the examples.
 
-   This error can be avoided by not building Java with Debug, HDF5_BUILD_JAVA:BOOL=OFF, 
+   This error can be avoided by not building Java with Debug, HDF5_BUILD_JAVA:BOOL=OFF,
    or not building Examples, HDF5_BUILD_EXAMPLES:BOOL=OFF.
-   (LRK - 2016/03/30, HDFFV-9743) 
+   (LRK - 2016/03/30, HDFFV-9743)
 
- - The H5Lexists API changed behavior in HDF5-1.10 when used with a file handle 
+ - The H5Lexists API changed behavior in HDF5-1.10 when used with a file handle
    and root group name ("/"):
 
    H5Lexists(fileid, "/")
 
-   In HDF5-1.8 it returns false (0) and in HDF5-1.10 it returns true (1). 
+   In HDF5-1.8 it returns false (0) and in HDF5-1.10 it returns true (1).
    The documentation will be updated with information regarding this change.
    (LRK - 2016/03/30, HDFFV-8746)
 
diff --git a/release_docs/HISTORY-1_8.txt b/release_docs/HISTORY-1_8.txt
index 4465d06..e6df15b 100644
--- a/release_docs/HISTORY-1_8.txt
+++ b/release_docs/HISTORY-1_8.txt
@@ -90,17 +90,17 @@ New Features
     Configuration
     -------------
     - Cmakehdf5: Added Ability to Run Multiple Make Commands
-    
+
       Added option --njobs to specify up to how many jobs to launch during
       build (cmake) and testing (ctest).
-      
+
       (AKC - 2015/12/13, HDFFV-9612)
 
     - Cmakehdf5: Added Szip Support and Verbose Option
-      
-      Added --with-szlib to support the Szip library; and 
+
+      Added --with-szlib to support the Szip library; and
       --enable/disable-verbose to display all CMake process output.
-      
+
       (AKC - 2015/11/16, HDFFV-8932 and DAILYTEST-195)
 
     - CMake minimum is now 3.1.0. (ADB - 2015/11/14)
@@ -122,13 +122,13 @@ New Features
     Library
     -------
     - New API Calls for Searching for External Dataset Storage
-      
+
       API calls that determine the search path for dataset external
-      storage were added. H5Pset/get_efile_prefix() API calls were added 
-      to the library. These functions give control over the search path 
-      for dataset external storage that has been configured with 
+      storage were added. H5Pset/get_efile_prefix() API calls were added
+      to the library. These functions give control over the search path
+      for dataset external storage that has been configured with
       H5Pset_external().
-      
+
       Additionally, the HDF5_EXTFILE_PREFIX environment variable can be
       used to control the search path.
 
@@ -160,7 +160,7 @@ New Features
       H5PTcreate has been added to replace H5PTcreate_fl. H5PTcreate
       takes a property list identifier to provide flexibility on
       creation properties.  This also removes the following warning:
-      "deprecated conversion from string constant to "char*" 
+      "deprecated conversion from string constant to "char*"
       [-Wwrite-strings]".
 
       (BMR - 2016/04/25, HDFFV-9708, HDFFV-8615)
@@ -201,7 +201,7 @@ New Features
       Two accessor wrappers were added to class PacketTable.
 
       PacketTable::GetDataset() returns the identifier of the dataset
-      associated with the packet table, and PacketTable::GetDatatype() 
+      associated with the packet table, and PacketTable::GetDatatype()
       returns the identifier of the datatype that the packet table uses.
 
       (BMR - 2016/04/25, HDFFV-8623 patch 4)
@@ -211,7 +211,7 @@ New Features
       Overloaded functions were added to provide the "const char*"
       argument; the existing version will be deprecated in future
       releases. This also removes the following warning:
-      "deprecated conversion from string constant to "char*" 
+      "deprecated conversion from string constant to "char*"
       [-Wwrite-strings]".
 
       (BMR - 2016/04/25, HDFFV-8623 patch 1, HDFFV-8615)
@@ -247,9 +247,9 @@ New Features
       The two following functions were added:
         ArrayType::getArrayNDims() const
         ArrayType::getArrayDims() const
-      to provide const version, and the non-const version was marked 
-      deprecated. In-memory array information, ArrayType::rank and 
-      ArrayType::dimensions, were removed. This is an implementation 
+      to provide const version, and the non-const version was marked
+      deprecated. In-memory array information, ArrayType::rank and
+      ArrayType::dimensions, were removed. This is an implementation
       detail and should not affect applications.
 
       (BMR, 2016/04/25, HDFFV-9725)
@@ -264,8 +264,8 @@ New Features
 
 Support for New Platforms, Languages, and Compilers
 ===================================================
-    - Mac OS X El Capitan 10.11.4 with compilers Apple clang/clang++ 
-      version 7.3.0 from Xcode 7.3, gfortran GNU Fortran (GCC) 5.2.0 
+    - Mac OS X El Capitan 10.11.4 with compilers Apple clang/clang++
+      version 7.3.0 from Xcode 7.3, gfortran GNU Fortran (GCC) 5.2.0
       and Intel icc/icpc/ifort version 16.0.2
 
 
@@ -293,7 +293,7 @@ Bug Fixes since HDF5-1.8.16
 
       (DER - 2015/12/08, HDFFV-9627)
 
-    - The --enable-clear-file-buffers configure Option was Non-functional 
+    - The --enable-clear-file-buffers configure Option was Non-functional
       so the Feature was Always Enabled (its default value).
 
       Regardless of the configure flag, the setting was always enabled when
@@ -311,7 +311,7 @@ Bug Fixes since HDF5-1.8.16
 
       (DER - 2016/02/03, HDFFV-9676)
 
-    - Added a patch to remove '"'s from arguments for MPI compilers that 
+    - Added a patch to remove '"'s from arguments for MPI compilers that
       were causing errors compiling H5lib_settings.c with SGI MPT.
 
       (LRK - 2016/04/20, HDFFV-9439)
@@ -354,19 +354,19 @@ Bug Fixes since HDF5-1.8.16
     -----
     - h5dump: Sub-setting Fixed for Dimensions Greater than Two
 
-      When a dataset has more than two dimensions, sub-setting would 
-      incorrectly calculate the data that needed to be displayed. 
-      Added in block and stride calculations that account for dimensions 
-      greater than two. NOTE: lines that have line breaks inserted 
-      because of display length calculations may have index info that 
+      When a dataset has more than two dimensions, sub-setting would
+      incorrectly calculate the data that needed to be displayed.
+      Added in block and stride calculations that account for dimensions
+      greater than two. NOTE: lines that have line breaks inserted
+      because of display length calculations may have index info that
       is incorrect until the next dimension break.
 
       (ADB - 2016/03/07, HDFFV-9698)
 
     - h5dump: Issue with Argument Segmentation Fault
 
-      When an argument with an optional value was at the end of the command 
-      line with a value, h5dump would crash. Reworked check for remaining 
+      When an argument with an optional value was at the end of the command
+      line with a value, h5dump would crash. Reworked check for remaining
       arguments.
 
       (ADB - 2016/03/07, HDFFV-9570, HDFFV-9684)
@@ -378,7 +378,7 @@ Bug Fixes since HDF5-1.8.16
       (ADB -, 2016/03/07, HDFFV-9241)
 
     - h5dump: Clarified Help
-      
+
       Clarified usage of -O F option in h5dump utility help.
 
       (ADB - 2016/03/07, HDFFV-9066)
@@ -391,7 +391,7 @@ Bug Fixes since HDF5-1.8.16
 
     - VS2015 Release Changed how Timezone was Handled
 
-      Created a function, HDget_timezone, in H5system.c. Replaced 
+      Created a function, HDget_timezone, in H5system.c. Replaced
       timezone variable usage with function call.
 
       (ADB - 2015/11/02, HDFFV-9550)
@@ -408,7 +408,7 @@ Bug Fixes since HDF5-1.8.16
     -------
     - Removal of Obsolete Methods
 
-      The overloaded methods which had parameters that should be const 
+      The overloaded methods which had parameters that should be const
       but were not have been removed.
 
       (BMR - 2016/01/13, HDFFV-9789)
@@ -419,7 +419,7 @@ Bug Fixes since HDF5-1.8.16
     ---------------
     - Fixed Memory Leak in Packet Table API
 
-      Applied user's patch to fix memory leak in the creation of a 
+      Applied user's patch to fix memory leak in the creation of a
       packet table.
 
       (BMR - 2016/04/25, HDFFV-9700)
@@ -1421,7 +1421,7 @@ Known Problems
   (SLU - 2005/06/30)
 
 
-%%%%1.8.15%%%%   
+%%%%1.8.15%%%%
 
 
 HDF5 version 1.8.15 released on 2015-05-04
@@ -1430,9 +1430,9 @@ HDF5 version 1.8.15 released on 2015-05-04
 INTRODUCTION
 ============
 
-This document describes the differences between HDF5-1.8.14 and 
-HDF5-1.8.15, and contains information on the platforms tested and 
-known problems in HDF5-1.8.15. 
+This document describes the differences between HDF5-1.8.14 and
+HDF5-1.8.15, and contains information on the platforms tested and
+known problems in HDF5-1.8.15.
 
 Links to the HDF5 source code, documentation, and additional materials
 can be found on the HDF5 web page at:
@@ -1443,11 +1443,11 @@ The HDF5 release can be obtained from:
 
      http://www.hdfgroup.org/HDF5/release/obtain5.html
 
-User documentation for HDF5 can be accessed directly at this location: 
+User documentation for HDF5 can be accessed directly at this location:
 
      http://www.hdfgroup.org/HDF5/doc/
 
-All new and modified APIs are listed in detail in the "HDF5 Software Changes 
+All new and modified APIs are listed in detail in the "HDF5 Software Changes
 from Release to Release" document at this location:
 
      http://www.hdfgroup.org/HDF5/doc/ADGuide/Changes.html
@@ -1475,18 +1475,18 @@ New Features
     Configuration
     -------------
     - CMake
-    
+
       Improvements made to the CMake build system.
-        
+
       The default options were changed to align with the Autotools configure
       defaults. CMake configure files now support components when packaged
       with CPack. Windows CPack supports WiX packaging, and will look for
-      WiX and NSIS in the standard locations. 
-      
+      WiX and NSIS in the standard locations.
+
       The CMake minimum has been changed to 3.1.
-      
+
       (ADB - 2015/04/01 HDFFV-8074, 8968, 9006)
-      
+
     - cmakehdf5 for Cmake building.
       Added configure options to support the building of Fortran or CXX API,
       to enable/disable testings. Use "cmakehdf5 --help" for details.
@@ -1516,10 +1516,10 @@ New Features
       (MSC - 2015/02/19 HDFFV-9068)
 
     - Large File Support Configuration Option
-      
+
       Removed the option to enable or disable large file support. It will
       always be enabled.
-      
+
       (MSC - 2015/02/19 HDFFV-9097)
 
     - Removed Configuration Feature
@@ -1576,11 +1576,11 @@ New Features
 
       (DER - 2015-02-26, HDFFV-9057, 7567, 9088, 7566)
 
-    - _POSIX_C_SOURCE, _GNU_SOURCE, and _BSD_SOURCE No Longer Exported 
+    - _POSIX_C_SOURCE, _GNU_SOURCE, and _BSD_SOURCE No Longer Exported
       to h5cc and Other Compiler Wrappers
 
-      The _POSIX_C_SOURCE, _GNU_SOURCE, and _BSD_SOURCE definitions are 
-      not required for using API functions and may conflict with user 
+      The _POSIX_C_SOURCE, _GNU_SOURCE, and _BSD_SOURCE definitions are
+      not required for using API functions and may conflict with user
       code requirements.
 
       (DER - 2015-03-08, HDFFV-9152)
@@ -1664,33 +1664,33 @@ New Features
       separately from the library.
 
       (DER - 2015-04-01, HDFFV-9100)
- 
+
     - H5Pset_istore_k and H5Pset_sym_k
 
-      These two functions didn't check the value of the input parameter "ik". 
-      When 2*ik exceeded 2 bytes of storage, data was lost in the file; 
-      for example, some chunks would be overwritten.  
+      These two functions didn't check the value of the input parameter "ik".
+      When 2*ik exceeded 2 bytes of storage, data was lost in the file;
+      for example, some chunks would be overwritten.
 
       Added validation of "ik" to not exceed the max v1 btree entries (2 bytes)
       to these two routines.
 
       (VC - 2015-03-24, HDFFV-9173)
 
-    - Added Functions to Control the Value of H5PL_no_plugin_g without 
+    - Added Functions to Control the Value of H5PL_no_plugin_g without
       Using an Environment Variable
-      
-      Sometimes it is necessary for an application to disable the use of 
-      dynamically loaded plugin libraries without requiring the library to 
-      be built with plugin support disabled or to set an environment 
+
+      Sometimes it is necessary for an application to disable the use of
+      dynamically loaded plugin libraries without requiring the library to
+      be built with plugin support disabled or to set an environment
       variable to disable plugin support globally.
-      
+
       Two new functions (H5PLset_loading_state() and H5PLget_loading_state())
-      were added to the HDF5 C Library. These functions require a parameter 
-      that indicates which type of dynamically loaded plugin is enabled or 
+      were added to the HDF5 C Library. These functions require a parameter
+      that indicates which type of dynamically loaded plugin is enabled or
       disabled.
-      
+
       (ADB - 2015-03-17, HDFFV-8520)
-      
+
     Parallel Library
     ----------------
     - MPI_Finalize and HDF5 Library Shutdown
@@ -1701,12 +1701,12 @@ New Features
 
       Attached an attribute destroy callback to MPI_COMM_SELF that
       shuts down the HDF5 library when MPI_COMM_SELF is destroyed,
-      in other words, on MPI_Finalize. This should fix several issues 
-      that users see when they forget to close HDF5 objects before 
-      calling MPI_Finalize().  
+      in other words, on MPI_Finalize. This should fix several issues
+      that users see when they forget to close HDF5 objects before
+      calling MPI_Finalize().
 
       (MSC - 2015/02/25, HDFFV-883)
- 
+
     Tools
     -----
     - None
@@ -1717,19 +1717,19 @@ New Features
 
     Fortran API
     -----------
-    - Added Global Variables 
-    
-      These new global variables are equivalent to the C definitions 
+    - Added Global Variables
+
+      These new global variables are equivalent to the C definitions
       without the '_F':
-      
-      H5G_UDLINK_F  
+
+      H5G_UDLINK_F
       H5G_SAME_LOC_F
       H5O_TYPE_UNKNOWN_F
       H5O_TYPE_GROUP_F
       H5O_TYPE_DATASET_F
       H5O_NAMED_DATATYPE_F
       H5O_TYPE_NTYPES_F
-      
+
       (MSB - 2015/02/03, HDFFV-9040)
 
 
@@ -1737,7 +1737,7 @@ New Features
     -------
     - New Wrappers for C Functions H5P[s/g]et_libver_bounds
 
-      Wrappers were added to class H5::FileAccPropList for the 
+      Wrappers were added to class H5::FileAccPropList for the
       C Functions H5Pget_libver_bounds and H5Pset_libver_bounds.
 
       (BMR, 2015/04/06, Part of HDFFV-9167)
@@ -1747,7 +1747,7 @@ New Features
       The following wrappers are added to class H5::CommonFG
       Returns the object header version of an object in a file or group,
       given the object's name.
-      
+
       unsigned childObjVersion(const char* objname) const;
       unsigned childObjVersion(const H5std_string& objname) const;
 
@@ -1756,7 +1756,7 @@ New Features
     - New DataType Constructor
 
       Added a DataType constructor that takes a PredType object, and this
-      constructor will invoke H5Tcopy to generate another datatype id 
+      constructor will invoke H5Tcopy to generate another datatype id
       from a predefined datatype.
 
       (BMR, 2015/04/06)
@@ -1764,7 +1764,7 @@ New Features
 
 Support for New Platforms, Languages, and Compilers
 ===================================================
-    - Support for Linux 3.10.0-123.20.1.el7 added (LK - 2015/04/01) 
+    - Support for Linux 3.10.0-123.20.1.el7 added (LK - 2015/04/01)
     - Support for Mac OS X Yosemite 10.10 added (AKC - 2015/03/04, HDFFV-9007)
     - Support for AIX 6.1 added and AIX 5.3 is retired. (AKC - 2015/01/09)
 
@@ -1778,19 +1778,19 @@ Bug Fixes since HDF5-1.8.14
 
       Fixed by assign it with the proper value.
 
-      (AKC - 2015/04/29, HDFFV-9298) 
+      (AKC - 2015/04/29, HDFFV-9298)
 
     - Windows Installer Incorrect Display of PATH Environment Variable
-    
+
       In the Windows installer, the dialog box where the user can elect to
       add the product's bin path to the %PATH% environment variable displayed
       an incorrect path. This path was missing the C:\Program Files part
       and used the POSIX file separator '/' before the bin (<path>/bin,
       instead of <path>\bin).
-      
+
       The dialog box text was changed to simply say that the product's bin
       path would be added instead of explicitly displaying the path.
-      This is in line with most installers. The reason for not fixing the 
+      This is in line with most installers. The reason for not fixing the
       displayed path instead is that it is difficult to pass the correct
       path from CPack to the NSIS installer for display.
 
@@ -1803,34 +1803,34 @@ Bug Fixes since HDF5-1.8.14
     Library
     -------
     - Incorrect Usage of List in CMake COMPILE_DEFINITIONS set_property
-    
+
       The CMake command set_property with COMPILE_DEFINITIONS property
       needs a quoted semi-colon separated list of values. CMake will
       transform the list to a series of -D{value} for the compile.
-      
+
       (ADB - 2014/12/09, HDFV-9041)
-      
+
     - Fixed Compile Errors on Windows w/ Visual Studio and CMake When
       UNICODE is Defined
-    
+
       The HDF5 Library could not be built on Windows with Visual Studio when
-      UNICODE was defined. This was due to the incorrect use of the TEXT() 
+      UNICODE was defined. This was due to the incorrect use of the TEXT()
       macro and some Win32 API functions that take TCHAR parameters. The faulty
       code was a part of the filter plugin functionality. This was a
       compile-time error that only affected users who build HDF5 from source
       and define UNICODE, usually when HDF5 is being built as a part of a
       larger product. There were no run-time effects.
-      
+
       These errors caused no problems when UNICODE was not defined. HDF5 is
       normally not built with UNICODE defined and the binaries were
       unaffected.
-      
+
       The fix was to remove the TEXT() macro and explicitly use the
       'A' form of the Win32 API calls, which expect char strings instead of
       wchar_t strings.
-      
+
       Note that HDF5 currently does not support Unicode file paths on Windows.
-      
+
       (DER - 2015/02/22, HDFFV-8927)
 
     - Addition of Error Tracing Functionality to Several C API Calls
@@ -1846,11 +1846,11 @@ Bug Fixes since HDF5-1.8.14
 
     - H5Rdereference Now Checks for HADDR_UNDEF or Uninitialized References
 
-      When passed HADDR_UNDEF or uninitialized references, the previous 
-      behavior of H5Rdereference was to continue to process the reference 
-      as a valid address. 
-      
-      H5Rdereference was changed to return immediately (with an error 
+      When passed HADDR_UNDEF or uninitialized references, the previous
+      behavior of H5Rdereference was to continue to process the reference
+      as a valid address.
+
+      H5Rdereference was changed to return immediately (with an error
       message) if the references are HADDR_UNDEF or uninitialized.
 
       (MSB - 2015/3/10, HDFFV-7959)
@@ -1868,19 +1868,19 @@ Bug Fixes since HDF5-1.8.14
     Parallel Library
     ----------------
     - Fixed a Potential Memory Error
-      
-      Fixed a potential memory error when performing parallel I/O on a 
-      dataset with a single chunk, and at least one process has nothing 
+
+      Fixed a potential memory error when performing parallel I/O on a
+      dataset with a single chunk, and at least one process has nothing
       to do.
-      
+
       (NAF - 2015/02/16)
 
     - Parallel Test Problem Fixed
-      
+
       Fixed problem with parallel tests where they failed beyond a
       certain number of ranks. All tests should work for any arbitrary
-      number of ranks. 
-      
+      number of ranks.
+
       (MSC - 2014/11/06, HDFFV-1027,8962,8963)
 
     - MPE Support
@@ -1889,7 +1889,7 @@ Bug Fixes since HDF5-1.8.14
       dropped at some point in time.
 
       Fixed problem with enabling MPE. Users should use the community
-      maintained MPE on github (http://git.mpich.org/mpe.git/). 
+      maintained MPE on github (http://git.mpich.org/mpe.git/).
 
       (MSC - 2015/02/20, HDFFV-9135)
 
@@ -1925,28 +1925,28 @@ Bug Fixes since HDF5-1.8.14
     - Source perform/ directory moved to tools/perform.
       The perform directory is moved to tools/perform for easier maintenance.
       (AKC - 2014/12/17, HDFFV-9046)
-      
+
     Fortran API
     ------------
     - Fortran Fails with --enable-fortran2003 and Intel 15.x Compilers
-      
-      Added BIND(C) to the offending APIs. 
 
-      The Fortran Library (--enable-fortran2003) now works using Intel 15.x 
-      without the need for any additional compilers flags. 
-      
+      Added BIND(C) to the offending APIs.
+
+      The Fortran Library (--enable-fortran2003) now works using Intel 15.x
+      without the need for any additional compilers flags.
+
       (MSB - 2015/1/26, HDFFV-9049)
 
-    - h5tenum_insert_f Does Not Work with Default 8 Byte Integers 
+    - h5tenum_insert_f Does Not Work with Default 8 Byte Integers
       (xlf compiler)
-      
-      In the Fortran 90 API, 'value' is no longer cast into the C int type. 
-      Therefore, if h5tenum_insert_f is passed an 8 byte integer (via -i8) 
-      then 'value' is written as the same type as the default Fortran 
+
+      In the Fortran 90 API, 'value' is no longer cast into the C int type.
+      Therefore, if h5tenum_insert_f is passed an 8 byte integer (via -i8)
+      then 'value' is written as the same type as the default Fortran
       integer type (which can be 8 bytes).
-      
-      A new Fortran 2003 API was added which is more in line with the C 
-      API and users are strongly encouraged to use the Fortran 2003 API 
+
+      A new Fortran 2003 API was added which is more in line with the C
+      API and users are strongly encouraged to use the Fortran 2003 API
       instead of the Fortran 90 API.
 
       SUBROUTINE h5tenum_insert_f(type_id, name, value, hdferr)
@@ -1958,29 +1958,29 @@ Bug Fixes since HDF5-1.8.14
       (MSB - 2015/2/19, HDFFV-8908)
 
     - Some Fortran APIs Never Returned the Error State
-      
-      Some Fortran APIs never returned the error state: they 
-      would always return a positive number. The APIs include 
+
+      Some Fortran APIs never returned the error state: they
+      would always return a positive number. The APIs include
       the following:
-      
+
       h5fget_file_image_f
       h5lget_name_by_idx_f
       h5oget_comment_by_name_f
 
-      They were corrected to return a negative number as described in 
-      the Reference Manual if an error occurred. 
+      They were corrected to return a negative number as described in
+      the Reference Manual if an error occurred.
 
       (MSB - 2015/3/19, HDF5-239)
 
-    - Fixed h5pget_class_f 
+    - Fixed h5pget_class_f
 
-      h5pget_class_f never correlated the class identifier to the property 
-      list class name as indicated in the HDF5 Reference Manual; it instead 
-      returned a property list class identifier as an INTEGER. The INTEGER 
+      h5pget_class_f never correlated the class identifier to the property
+      list class name as indicated in the HDF5 Reference Manual; it instead
+      returned a property list class identifier as an INTEGER. The INTEGER
       needed to be of type INTEGER(HID_T) to be correct.
 
-      The h5pget_class_f API was changed to return an INTEGER(HID_T) 
-      property list class identifier instead of an INTEGER. This mimics the 
+      The h5pget_class_f API was changed to return an INTEGER(HID_T)
+      property list class identifier instead of an INTEGER. This mimics the
       intended behavior of the C API.
 
       (MSB - 2015/3/16, HDFFV5-9162)
@@ -1990,12 +1990,12 @@ Bug Fixes since HDF5-1.8.14
     - Combined Two H5File::getObjCount Overloaded Methods
 
       The following two methods
-      
+
       ssize_t getObjCount(unsigned types) const;
       ssize_t getObjCount() const;
-      
+
       were combined into one:
-      
+
       ssize_t getObjCount(unsigned types = H5F_OBJ_ALL) const;
 
       (BMR - 2015/04/06)
@@ -2003,7 +2003,7 @@ Bug Fixes since HDF5-1.8.14
     - Many Warnings Were Removed
 
       Many warnings such as conversion, unused variables, missing base
-      class initialization, and initializing base classes in wrong order 
+      class initialization, and initializing base classes in wrong order
       were removed.
 
       (BMR, 2015/04/06)
@@ -2014,10 +2014,10 @@ Bug Fixes since HDF5-1.8.14
       H5Location, and H5Object are no longer appropriate after the data member
       "id" had been moved from IdComponent to the sub-classes in previous
       releases.
-      
+
       <Classname>(const hid_t h5_id);
       <Classname>(const <Classname>& original);
-      
+
       The copy constructors were no-op and removed in 1.8.15.  The other
       constructors will be removed from 1.10 release, and then from 1.8.17
       if their removal does not cause any problems.
@@ -2041,39 +2041,39 @@ Bug Fixes since HDF5-1.8.14
 
       (MSB - 2015/2/14, HDFFV-8685)
 
-   
+
     - H5PTcreate_fl Does Not Convert to Memory Datatype
 
-      H5PTcreate_fl now converts to the table's native memory datatype 
+      H5PTcreate_fl now converts to the table's native memory datatype
       to fix the problem of handling BE and LE packet tables.
 
       (MSB - 2015/2/26 - HDFFV-9042)
 
     - Fix for H5LT Attribute Functions
-      
-      H5LT attribute functions fail to create attributes whose name 
+
+      H5LT attribute functions fail to create attributes whose name
       is a substring of an existing attribute.
 
-      H5LT attribute functions can now create attributes whose name 
+      H5LT attribute functions can now create attributes whose name
       is a substring of an existing attribute.
 
       (MSB - 2015/2/24, HDFFV-9132)
-    
+
 
     Fortran High-Level APIs:
     ------------------------
 
     - Internal Library Fix for Missing Argument Declaration
-    
-      In Interface block for h5tbmake_table_c, "max_char_size_field_names" 
-      is listed as an input, but in the argument definitions it is 
-      "INTEGER :: max_char_size". This caused no known problems with the 
+
+      In Interface block for h5tbmake_table_c, "max_char_size_field_names"
+      is listed as an input, but in the argument definitions it is
+      "INTEGER :: max_char_size". This caused no known problems with the
       Fortran HL API.
 
       Fixed missing argument definition.
-       
+
       (MSB - 2015/2/18, HDFFV-8559)
-      
+
 
     Testing
     -------
@@ -2104,17 +2104,17 @@ They are built with the configure process unless specified otherwise.
     #1 SMP x86_64 GNU/Linux       compilers for 64-bit applications;
     (koala)                           Version 4.1.2 20080704 (Red Hat 4.1.2-55)
                                       Version 4.8.4, 4.9.2
-                                  Intel(R) C, C++, Fortran Compilers for 
-                                  applications running on Intel(R) 64; 
+                                  Intel(R) C, C++, Fortran Compilers for
+                                  applications running on Intel(R) 64;
                                       Version 15.0.1.133 Build 20141023
 
     Linux 2.6.32-431.11.2.el6     GNU C (gcc), Fortran (gfortran), C++ (g++)
     #1 SMP x86_64 GNU/Linux       compilers:
     (platypus)                       Version 4.4.7 20120313
                                      Version 4.8.2, Version 4.9.2
-                                  PGI C, Fortran, C++ for 64-bit target on 
+                                  PGI C, Fortran, C++ for 64-bit target on
                                   x86-64;
-                                      Version 14.10-0 
+                                      Version 14.10-0
                                   Intel(R) C (icc), C++ (icpc), Fortran (icc)
                                   compilers:
                                      Version 15.0.1.133 Build 20141023
@@ -2123,7 +2123,7 @@ They are built with the configure process unless specified otherwise.
     #1 SMP x86_64 GNU/Linux       compilers:
     (moohan)                         Version 4.8.2 20140120 (Red Hat 4.8.2-16)
                                   Intel(R) C Intel(R) 64 Compiler XE for
-                                  applications running on Intel(R) 64, 
+                                  applications running on Intel(R) 64,
                                      Version 15.0.1.133 Build 20141023
 
     Linux 2.6.32-431.29.2.el6.ppc64 gcc (GCC) 4.4.7 20120313 (Red Hat 4.4.7-4)
@@ -2147,7 +2147,7 @@ They are built with the configure process unless specified otherwise.
                                   Visual Studio 2010 w/ Intel Fortran 14 (cmake)
                                   Visual Studio 2012 w/ Intel Fortran 15 (cmake)
                                   Visual Studio 2013 w/ Intel Fortran 15 (cmake)
-                                  
+
     Windows 8.1                   Visual Studio 2012 w/ Intel Fortran 15 (cmake)
                                   Visual Studio 2013 w/ Intel Fortran 15 (cmake)
 
@@ -2171,14 +2171,14 @@ Tested Configuration Features Summary
 =====================================
 
     In the tables below
-          y   = tested 
+          y   = tested
           n   = not tested in this release
           C   = Cluster
           W   = Workstation
           x   = not working in this release
           dna = does not apply
           ( ) = footnote appears below second table
-          <blank> = testing incomplete on this feature or platform 
+          <blank> = testing incomplete on this feature or platform
 
 Platform                              C         F90/   F90      C++  zlib  SZIP
                                       parallel  F2003  parallel
@@ -2186,7 +2186,7 @@ SunOS 5.11 32-bit                       n        y/y    n        y    y     y
 SunOS 5.11 64-bit                       n        y/y    n        y    y     y
 Windows 7                               y        y/y    n        y    y     y
 Windows 7 x64                           y        y/y    n        y    y     y
-Windows 7 Cygwin                        n        y/y    n        y    y     n 
+Windows 7 Cygwin                        n        y/y    n        y    y     n
 Windows 8.1                             n        y/y    n        y    y     y
 Windows 8.1 x64                         n        y/y    n        y    y     y
 Mac OS X Mountain Lion 10.8.5 64-bit    n        y/y    n        y    y     y
@@ -2205,30 +2205,30 @@ CentOS 7.0 Linux 3.10.0 x86_64 GNU      y        y/y    y        y    y     y
 CentOS 7.0 Linux 3.10.0 x86_64 Intel    n        y/y    n        y    y     y
 Linux 2.6.32-431.11.2.el6.ppc64         n        y/n    n        y    y     y
 
-Platform                                 Shared  Shared    Shared    Thread-  
-                                         C libs  F90 libs  C++ libs  safe     
-SunOS 5.11 32-bit                          y       y         y         y        
-SunOS 5.11 64-bit                          y       y         y         y        
+Platform                                 Shared  Shared    Shared    Thread-
+                                         C libs  F90 libs  C++ libs  safe
+SunOS 5.11 32-bit                          y       y         y         y
+SunOS 5.11 64-bit                          y       y         y         y
 Windows 7                                  y       y         y         y
 Windows 7 x64                              y       y         y         y
 Windows 7 Cygwin                           n       n         n         y
 Windows 8.1                                y       y         y         y
 Windows 8.1 x64                            y       y         y         y
-Mac OS X Mountain Lion 10.8.5 64-bit       y       n         y         y        
+Mac OS X Mountain Lion 10.8.5 64-bit       y       n         y         y
 Mac OS X Mavericks 10.9.5 64-bit           y       n         y         y
 Mac OS X Yosemeti 10.10.2 64-bit           y       n         y         y
-AIX 6.1 32- and 64-bit                     y       n         n         y        
-CentOS 5.9 Linux 2.6.18-308 i686 GNU       y       y         y         y        
-CentOS 5.9 Linux 2.6.18-308 i686 Intel     y       y         y         n        
-CentOS 5.9 Linux 2.6.18-308 i686 PGI       y       y         y         n        
-CentOS 5.9 Linux 2.6.18 x86_64 GNU         y       y         y         y        
-CentOS 5.9 Linux 2.6.18 x86_64 Intel       y       y         y         n        
+AIX 6.1 32- and 64-bit                     y       n         n         y
+CentOS 5.9 Linux 2.6.18-308 i686 GNU       y       y         y         y
+CentOS 5.9 Linux 2.6.18-308 i686 Intel     y       y         y         n
+CentOS 5.9 Linux 2.6.18-308 i686 PGI       y       y         y         n
+CentOS 5.9 Linux 2.6.18 x86_64 GNU         y       y         y         y
+CentOS 5.9 Linux 2.6.18 x86_64 Intel       y       y         y         n
 CentOS 6.4 Linux 2.6.32 x86_64 GNU         y       y         y         n
 CentOS 6.4 Linux 2.6.32 x86_64 Intel       y       y         y         n
-CentOS 6.4 Linux 2.6.32 x86_64 PGI         y       y         y         n     
+CentOS 6.4 Linux 2.6.32 x86_64 PGI         y       y         y         n
 CentOS 7.0 Linux 3.10.0 x86_64 GNU         y       y         y         n
 CentOS 7.0 Linux 3.10.0 x86_64 Intel       y       y         y         n
-Linux 2.6.32-431.11.2.el6.ppc64            y       y         y         n 
+Linux 2.6.32-431.11.2.el6.ppc64            y       y         y         n
 
 Compiler versions for each platform are listed in the preceding
 "Supported Platforms" table.
@@ -2244,7 +2244,7 @@ The following platforms are not supported but have been tested for this release.
 
     Linux 2.6.18-431.11.2.el6     MPICH mpich 3.1.3 compiled with
     #1 SMP x86_64 GNU/Linux           gcc 4.9.2 and gfortran 4.9.2
-    (platypus)                    g95 (GCC 4.0.3 (g95 0.94!)   
+    (platypus)                    g95 (GCC 4.0.3 (g95 0.94!)
 
     FreeBSD 8.2-STABLE i386       gcc 4.5.4 [FreeBSD] 20110526
     (loyalty)                     gcc 4.6.1 20110527
@@ -2275,7 +2275,7 @@ The following platforms are not supported but have been tested for this release.
                                   gcc (Ubuntu/Linaro 4.9.1-0ubuntu1) 4.9.1
                                   GNU Fortran (Ubuntu/Linaro 4.9.1-0ubuntu1) 4.9.1
                                   (cmake and autotools)
-    
+
     hopper.nersc.gov              PrgEnv-gnu/5.2.40
                                   gcc (GCC) 4.9.2 20141030 (Cray Inc.)
                                   GNU Fortran (GCC) 4.9.2 20141030 (Cray Inc.)
@@ -2285,7 +2285,7 @@ The following platforms are not supported but have been tested for this release.
 Known Problems
 ==============
 * On Windows platforms in debug configurations, the VFD flush1 tests will fail
-  with the split and multi VFD drivers. These tests will display a modal debug 
+  with the split and multi VFD drivers. These tests will display a modal debug
   dialog which must be answered or wait for the test timeout to expire.
   (ADB - 2014/06/23 - HDFFV-8851)
 
@@ -2309,7 +2309,7 @@ Known Problems
 
    h5dump --no-compact-subset -d "AHFINDERDIRECT::ah_centroid_t[0] it=0 tl=0"
      tno-subset.h5
-  
+
   This is due to the embedded spaces in the dataset name being interpreted
   by the command script launcher as meta-characters, thus passing three
   arguments to h5dump's -d flag. The command passes if run by hand, just
@@ -2336,7 +2336,7 @@ Known Problems
   that "make prefix=XXX install" no longer works for shared libraries. It
   still works correctly for static libraries. Therefore, if you want to
   install the HDF5 shared libraries in a location such as /usr/local/hdf5,
-  you need to specify the location via the --prefix option during configure 
+  you need to specify the location via the --prefix option during configure
   time. E.g, ./configure --prefix=/usr/local/hdf5 ...
   (AKC - 2011/05/07 - HDFFV-7583)
 
@@ -2344,15 +2344,15 @@ Known Problems
   be terminated by the alarm signal.  If that happens, one can increase the
   alarm seconds (default is 1200 seconds = 20 minutes) by setting the
   environment variable, $HDF5_ALARM_SECONDS, to a larger value such as 3600
-  (60 minutes).  Note that the t_shapesame test may fail in some systems 
-  (see the "While working on the 1.8.6 release..." problem below).  If 
+  (60 minutes).  Note that the t_shapesame test may fail in some systems
+  (see the "While working on the 1.8.6 release..." problem below).  If
   it does, it will waste more time if $HDF5_ALARM_SECONDS is set
   to a larger value.
   (AKC - 2011/05/07)
 
 * Shared Fortran libraries are not quite working on AIX. While they are
   generated when --enable-shared is specified, the fortran and hl/fortran
-  tests fail. the issue. HL and C++ shared libraries should now be 
+  tests fail. the issue. HL and C++ shared libraries should now be
   working as intended, however.
   (MAM - 2011/04/20)
 
@@ -2374,32 +2374,32 @@ Known Problems
   get_eoa and set_eoa callback functions.  A new callback function
   get_type_map was added in.  The public function H5FDrealloc was taken
   out in 1.8.  The problem only happens when users define their own driver
-  for 1.6 and try to plug in 1.8 library.  Because there's only one user 
-  complaining about it, we (Elena, Quincey, and I) decided to leave it as 
+  for 1.6 and try to plug in 1.8 library.  Because there's only one user
+  complaining about it, we (Elena, Quincey, and I) decided to leave it as
   it is (see bug report #1279).  Quincey will make a plan for 1.10.
   (SLU - 2010/02/02)
 
 * The --enable-static-exec configure flag will only statically link libraries
   if the static version of that library is present. If only the shared version
   of a library exists (i.e., most system libraries on Solaris, AIX, and Mac,
-  for example, only have shared versions), the flag should still result in a 
-  successful compilation, but note that the installed executables will not be 
-  fully static. Thus, the only guarantee on these systems is that the 
+  for example, only have shared versions), the flag should still result in a
+  successful compilation, but note that the installed executables will not be
+  fully static. Thus, the only guarantee on these systems is that the
   executable is statically linked with just the HDF5 library.
   (MAM - 2009/11/04)
-  
-* A dataset created or rewritten with a v1.6.3 library or after cannot be read 
+
+* A dataset created or rewritten with a v1.6.3 library or after cannot be read
   with the v1.6.2 library or before when the Fletcher32 EDC filter is enabled.
-  There was a bug in the calculation of the Fletcher32 checksum in the 
+  There was a bug in the calculation of the Fletcher32 checksum in the
   library before v1.6.3; the checksum value was not consistent between big-
-  endian and little-endian systems.  This bug was fixed in Release 1.6.3.  
-  However, after fixing the bug, the checksum value was no longer the same as 
-  before on little-endian system.  Library releases after 1.6.4 can still read 
-  datasets created or rewritten with an HDF5 library of v1.6.2 or before.  
+  endian and little-endian systems.  This bug was fixed in Release 1.6.3.
+  However, after fixing the bug, the checksum value was no longer the same as
+  before on little-endian system.  Library releases after 1.6.4 can still read
+  datasets created or rewritten with an HDF5 library of v1.6.2 or before.
   (SLU - 2005/06/30)
 
 
-%%%%1.8.14%%%%   
+%%%%1.8.14%%%%
 
 
 HDF5 version 1.8.14 released on 2014-11-12
@@ -2408,11 +2408,11 @@ HDF5 version 1.8.14 released on 2014-11-12
 INTRODUCTION
 ============
 
-This document describes the differences between HDF5-1.8.13 and 
-HDF5-1.8.14, and contains information on the platforms tested and 
-known problems in HDF5-1.8.14. 
+This document describes the differences between HDF5-1.8.13 and
+HDF5-1.8.14, and contains information on the platforms tested and
+known problems in HDF5-1.8.14.
 
-All new and modified APIs are listed in the "HDF5 Software Changes 
+All new and modified APIs are listed in the "HDF5 Software Changes
 from Release to Release" document along with details about previous
 releases at:
 
@@ -2427,7 +2427,7 @@ The HDF5 1.8.14 release can be obtained from:
 
      http://www.hdfgroup.org/HDF5/release/obtain5.html
 
-User documentation for 1.8.14 can be accessed directly at this location: 
+User documentation for 1.8.14 can be accessed directly at this location:
 
      http://www.hdfgroup.org/HDF5/doc/
 
@@ -2456,7 +2456,7 @@ New Features
     - bin/cmakehdf5 configures, builds and installs C, C++, Fortran and High
       level API's. (It used to build the C API only).
       (AKC 2014/10/17 HDFFV-8932).
-    
+
     Library
     -------
     - None
@@ -2464,17 +2464,17 @@ New Features
     Parallel Library
     ----------------
      - Chunk Fill Writes Changed to Collective
-    
-      Slow performance in chunk fill writes. Chunk fills 
-      in the past were written independently by rank 0 one block 
-      at a time. 
-      
-      Optimized the chunk fill write algorithm so that all 
-      chunk fill values will be written collectively in a single MPI-IO 
-      call. This should show a great performance improvement when 
-      creating chunked datasets in parallel when the chunk dimensions 
+
+      Slow performance in chunk fill writes. Chunk fills
+      in the past were written independently by rank 0 one block
+      at a time.
+
+      Optimized the chunk fill write algorithm so that all
+      chunk fill values will be written collectively in a single MPI-IO
+      call. This should show a great performance improvement when
+      creating chunked datasets in parallel when the chunk dimensions
       are fairly small.
-      
+
       (MSC - 2014/08/22, HDFFV-8878)
 
     Tools
@@ -2496,7 +2496,7 @@ New Features
       The data member "id" in classes that represent HDF5 objects were
       initialized to 0, which caused problem for some users.
 
-      Replaced 0 with H5I_INVALID_HID to initialize these "id"s.  For the 
+      Replaced 0 with H5I_INVALID_HID to initialize these "id"s.  For the
       PropList class, H5P_DEFAULT is used instead of H5I_INVALID_HID.
 
       (BMR - 2014/09/30, HDFFV-4259)
@@ -2505,7 +2505,7 @@ New Features
 
 Support for New Platforms, Languages, and Compilers
 ===================================================
-    - None                                  
+    - None
 
 Bug Fixes since HDF5-1.8.13
 ===========================
@@ -2513,26 +2513,26 @@ Bug Fixes since HDF5-1.8.13
     Configuration
     -------------
     - CMake and SVN URLs
-    
+
       The SVN URLs will be different when the HDF Group domain name changes.
-    
+
       Removed the SVN URL references in the cacheinit.cmake and release_docs files.
-      
+
       (ADB - 2014/10/27, HDFFV-8953)
 
     - CMake Packaging
-    
+
       A Fortran module was not generated if the compiler was not F2003
       compliant.
-    
+
       Removed the module name from the package list of Fortran modules because
       that module was never generated. This was only an issue for Fortran
       compliers that are not F2003 compatible.
-      
+
       (ADB - 2014/10/16, HDFFV-8932)
 
     - Shared Library Interface Version Number (soname)
-      
+
       In order to increase the maintainability of HDF5, an architectural
       change was made which required the renaming of several public symbols in
       H5Ppublic.h.
@@ -2543,71 +2543,71 @@ Bug Fixes since HDF5-1.8.13
       the 'HDF5 Software Changes from Release to Release' document:
 
           http://www.hdfgroup.org/HDF5/doc/ADGuide/Changes.html
-      
+
       (AKC - 2014/10/03, HDFFV-8937)
 
-    - Configure Settings for Mac OSX Need Defaults for PROD_XXX, DEBUG_XXX, 
+    - Configure Settings for Mac OSX Need Defaults for PROD_XXX, DEBUG_XXX,
       and PROFILE_XXX
-      
-      The configure setting files for Mac OSX (config/apple) did not 
-      have the default settings of PROD_XXX, DEBUG_XXX, PROFILE_XXX. 
-      
-      Added the default settings. Mac platforms now builds library with 
-      "-O3" optimization when the default clang compiler is used. 
-      
+
+      The configure setting files for Mac OSX (config/apple) did not
+      have the default settings of PROD_XXX, DEBUG_XXX, PROFILE_XXX.
+
+      Added the default settings. Mac platforms now builds library with
+      "-O3" optimization when the default clang compiler is used.
+
       (AKC - 2014/10/01, HDFFV-8933)
 
     - CMake ConfigureChecks
-    
+
       Two include files were missing from two C tests.
-    
+
       Propagated the configure test changes to H5_LDOUBLE_TO_INTEGER_WORKS_TEST
       and H5_ULLONG_TO_LDOUBLE_PRECISION_TEST to ConfigureChecks.cmake (added
       stdlib.h and string.h in the HDFTests.c file).
-      
+
       (ADB - 2014/09/02 HDFFV-8845)
-      
+
     - CMake Parallel Test Missing
-    
-      The source file was removed in the previous release but the parallel 
+
+      The source file was removed in the previous release but the parallel
       test t_posix_compliant was not.
-    
-      Removed the t_posix_compliant parallel test from the library. 
-      
+
+      Removed the t_posix_compliant parallel test from the library.
+
       (ADB - 2014/8/14 HDFFV-8880)
 
     - Autotools Reconfigure. Bison. Flex.
-    
-      The Bison and Flex files were out of date. 
-    
-      Bison was upgraded to 2.7, and Flex was upgraded to 2.5.37. The 
-      bin/reconfigure script now will execute Bison and Flex and update 
-      the hl/src files. 
-      
+
+      The Bison and Flex files were out of date.
+
+      Bison was upgraded to 2.7, and Flex was upgraded to 2.5.37. The
+      bin/reconfigure script now will execute Bison and Flex and update
+      the hl/src files.
+
       (ADB - 2014/06/16 HDFFV-8709)
 
     - Autotools Reconfigure. m4.
 
       The m4 macro processor was out of date.
-      
-      Reconfigured Autotools with m4 upgraded to 1.4.17. 
-    
+
+      Reconfigured Autotools with m4 upgraded to 1.4.17.
+
       (ADB - 2014/06/12 HDFFV-8743)
-    
-    - Autotools: Modified configure to add an entry at the beginning of AM_LDFLAGS 
-      for the hdf5 install directory.  Without this entry the relink commands 
-      invoked by "make install" to create libraries dependent on libhdf5.so added 
-      a dependency on the first libhdf5.so found in any directory in AM_LDFLAGS 
+
+    - Autotools: Modified configure to add an entry at the beginning of AM_LDFLAGS
+      for the hdf5 install directory.  Without this entry the relink commands
+      invoked by "make install" to create libraries dependent on libhdf5.so added
+      a dependency on the first libhdf5.so found in any directory in AM_LDFLAGS
       regardless of its version.  (LRK - 2014/10/17 HDFFV-8944)
 
     - Changed Autotools Build Behavior. Fortran High-level Library.
 
-      The Fortran high-level (HL) library did not compile if the default 
-      size of a REAL is DOUBLE PRECISION; the build would fail during 
+      The Fortran high-level (HL) library did not compile if the default
+      size of a REAL is DOUBLE PRECISION; the build would fail during
       compilation.
 
-      Configure now checks to see if REAL is DOUBLE PRECISION, Fortran is 
-      enabled, and HL library is enabled. If this is true, then configure 
+      Configure now checks to see if REAL is DOUBLE PRECISION, Fortran is
+      enabled, and HL library is enabled. If this is true, then configure
       will stop with an error message.
 
       (MSB - 2014/8/11, HDFFV-8883/HDFFV-889)
@@ -2617,36 +2617,36 @@ Bug Fixes since HDF5-1.8.13
     Library
     -------
     - Fixed Identifier Management Code
-      
-      Opening an object returns an identifier; closing the object should 
-      free up the identifier. A problem was found where the identifiers 
+
+      Opening an object returns an identifier; closing the object should
+      free up the identifier. A problem was found where the identifiers
       were not being freed up correctly.
-      
-      Fixed the problem so that identifiers that have been used can be 
+
+      Fixed the problem so that identifiers that have been used can be
       used again after their object has been closed.
-      
+
       (QAK - 2014/10/16, HDFFV-8930)
 
-    - Removal of DllMain() from Static Windows Builds 
+    - Removal of DllMain() from Static Windows Builds
 
-      A DllMain() function was added in HDF5 1.8.13 in order to handle 
-      win32 thread cleanup. The preprocessor #ifdefs around the DllMain 
-      function allowed it to be compiled when the static library is built, 
-      which is incorrect behavior that can cause linkage problems in 
+      A DllMain() function was added in HDF5 1.8.13 in order to handle
+      win32 thread cleanup. The preprocessor #ifdefs around the DllMain
+      function allowed it to be compiled when the static library is built,
+      which is incorrect behavior that can cause linkage problems in
       clients.
 
-      The fix was to change the preprocessor #ifdefs to exclude compiling 
-      DllMain() in static builds. Our DllMain function is now only 
+      The fix was to change the preprocessor #ifdefs to exclude compiling
+      DllMain() in static builds. Our DllMain function is now only
       compiled when the shared, thread-safe library is built on Windows.
 
       (DER - 2014/06/13, HDFFV-8837)
 
     - Enforce Constraint on page_size Parameter in H5Pset_core_write_tracking()
 
-      The reference manual states that the page_size parameter cannot be 
+      The reference manual states that the page_size parameter cannot be
       zero.
 
-      This change checks the page_size parameter to see it is zero and 
+      This change checks the page_size parameter to see it is zero and
       returns an error code if it is.
 
       (DER - 2014/08/11, HDFFV-8891)
@@ -2655,31 +2655,31 @@ Bug Fixes since HDF5-1.8.13
       (MSC - 2014/07/31, HDFFV-8888)
 
     - H5Ldelete_by_idx() Seg Fault on Non-existent Group Name
-      
-      If a non-existent group name was used by H5Ldelete_by_idx(), a 
-      segmentation fault would result. 
-      
+
+      If a non-existent group name was used by H5Ldelete_by_idx(), a
+      segmentation fault would result.
+
       Bug was fixed.
-      
+
       (MSC - 2014/07/31, HDFFV-8888)
 
     - Bug in Test When Building Parallel HDF5 on PVFS2
-      
+
       There was a bug in a test when building Parallel HDF5 on PVFS2.
-      
+
       The build now uses MPI_File_get_size() instead of stat().
-      
+
       (MSC - 2014/07/14, HDFFV-8856)
 
     - MPI-IO Driver Tried to Allocate Space for Zero-length Dataset
-      
+
       MPI-IO driver tried to allocate space for zero-length dataset
-      and asserts. 
-      
+      and asserts.
+
       Fixed driver and added a regression test.
-      
+
       (MSC - 2014/07/03, HDFFV-8761)
-      
+
 
     Parallel Library
     ----------------
@@ -2695,48 +2695,48 @@ Bug Fixes since HDF5-1.8.13
 
     Fortran API
     -------
-    - SIZEOF Replaced by C_SIZEOF and STORAGE_SIZE. 
-  
-      The intrinsic function SIZEOF is non-standard and should be replaced with a 
+    - SIZEOF Replaced by C_SIZEOF and STORAGE_SIZE.
+
+      The intrinsic function SIZEOF is non-standard and should be replaced with a
       standard intrinsic function.
 
-      If the F2008 intrinsic C_SIZEOF and STORAGE_SIZE are available, then they will 
-      be used instead of the non-standard SIZEOF intrinsic, even when the SIZEOF 
+      If the F2008 intrinsic C_SIZEOF and STORAGE_SIZE are available, then they will
+      be used instead of the non-standard SIZEOF intrinsic, even when the SIZEOF
       function is available.
 
       (MSB - 2014/6/16, HDFFV-8653)
 
     - Non-functional API: h5pget_fill_value_f
- 
+
       The Fortran wrapper h5pget_fill_value_f was calling the wrong C API.
 
-      The correct C API, H5Pget_fill_value, is now called by the Fortran 
+      The correct C API, H5Pget_fill_value, is now called by the Fortran
       wrapper.
 
       (MSB - 2014/9/25, HDFFV-8879)
 
     - Interoperability with C HDF5: H5Literate and h5literate_f
 
-      h5literate_f assumes the return value for the callback function to 
-      be of type int (or int_f in C). However, in the C wrapper the return 
-      value of H5Literate is type herr_t, and this could cause 
+      h5literate_f assumes the return value for the callback function to
+      be of type int (or int_f in C). However, in the C wrapper the return
+      value of H5Literate is type herr_t, and this could cause
       interoperability issues.
 
-      The callback function should be declared INTEGER(C_INT) for 
+      The callback function should be declared INTEGER(C_INT) for
       portability. The tests were updated accordingly.
 
       (MSB - 2014/9/26, HDFFV-8909)
 
-    - Interoperability with C HDF5: Constant INTEGER Parameters with the 
+    - Interoperability with C HDF5: Constant INTEGER Parameters with the
       H5FD Interface
 
       Wrong type cast of constant Fortran INTEGER parameters was used.
 
-      The following parameter constant types were changed from INTEGER to 
-      INTEGER(HID_T) to match the C types: H5FD_CORE, H5FD_FAMILY, H5FD_LOG, 
+      The following parameter constant types were changed from INTEGER to
+      INTEGER(HID_T) to match the C types: H5FD_CORE, H5FD_FAMILY, H5FD_LOG,
       H5FD_MPIO, H5FD_MULTI, H5FD_SEC2, and H5FD_STDIO.
 
-      Other internal 'int' types where changed to 'hid_t'; these are 
+      Other internal 'int' types where changed to 'hid_t'; these are
       transparent to the user.
 
       (MSB - 2014/7/18, HDFFV-8748)
@@ -2753,7 +2753,7 @@ Bug Fixes since HDF5-1.8.13
       (BMR - 2014/09/30, HDFFV-8928)
 
     - Disallow H5F_ACC_CREAT
-      
+
       H5F_ACC_CREAT was included in the C++ API but the C library does not
       allow it at this time.
 
@@ -2763,10 +2763,10 @@ Bug Fixes since HDF5-1.8.13
 
     - Missing Flags in Documentation: H5F_ACC_RDONLY and H5F_ACC_RDWR
 
-      The H5F_ACC_RDONLY and H5F_ACC_RDWR flags were missing from the 
+      The H5F_ACC_RDONLY and H5F_ACC_RDWR flags were missing from the
       documentation of the H5File constructors.
 
-      These two flags are now included in the documentation for opening 
+      These two flags are now included in the documentation for opening
       files.
 
       (BMR - 2014/09/29, HDFFV-8852)
@@ -2775,12 +2775,12 @@ Bug Fixes since HDF5-1.8.13
     ------
     - Seg Faults in H5TBread_field_name and H5TBread_field_name_f
 
-      When H5TBread_field_name or H5TBread_field_name_f were used to read a 
-      field and if the name of the field was wrong, a segmentation fault 
+      When H5TBread_field_name or H5TBread_field_name_f were used to read a
+      field and if the name of the field was wrong, a segmentation fault
       would result.
 
-      Both C and Fortran APIs were fixed so they no longer seg fault if 
-      the name of the field is wrong, and both APIs return a negative 
+      Both C and Fortran APIs were fixed so they no longer seg fault if
+      the name of the field is wrong, and both APIs return a negative
       value if the name of the field is wrong.
 
       (MSB - 2014/09/29, HDFFV-8912)
@@ -2788,25 +2788,25 @@ Bug Fixes since HDF5-1.8.13
     - Possible Buffer Overflow in High-level (HL) APIs
 
       Multiple HL APIs (H5DSis_scale is one example) had issues:
-        (1) The datatype from the file was re-used as the memory datatype, 
+        (1) The datatype from the file was re-used as the memory datatype,
             and
-        (2) No effort was made to ensure that strings were actually 
+        (2) No effort was made to ensure that strings were actually
             null-terminated.
-     
-      All of the HL routines now check for NULL pointers, for null-terminated 
-      strings, and to see if string buffers are short enough not to overflow 
-      the buffer. The minimum length of the buffers is now used in strncmp 
+
+      All of the HL routines now check for NULL pointers, for null-terminated
+      strings, and to see if string buffers are short enough not to overflow
+      the buffer. The minimum length of the buffers is now used in strncmp
       to avoid overflow.
 
       (MSB - 2014/9/29, HDFFV-8670)
 
     - Behavior Change of H5LTdtype_to_text
 
-      If a user buffer was passed in to H5LTdtype_to_text along with the 
-      length, then the function would not truncate at the end of the 
+      If a user buffer was passed in to H5LTdtype_to_text along with the
+      length, then the function would not truncate at the end of the
       buffer, but would exceed the end of the user buffer.
 
-      H5LTdtype_to_text was changed to truncate the string if the user 
+      H5LTdtype_to_text was changed to truncate the string if the user
       buffer is too small.
 
       (MSB - 2014/9/29, HDFFV-8855)
@@ -2826,7 +2826,7 @@ Bug Fixes since HDF5-1.8.13
       used by several test programs. (AKC - 2014/07/22 HDFFV-8881)
 
     - Fixed Incorrect Exit Code Values in Testframe
-      The testframe which is commonly used by several test programs 
+      The testframe which is commonly used by several test programs
       had some incorrect exit code values.  Fixed the incorrect exit code
       values.  (AKC - 2014/07/22, HDFFV-8881)
 
@@ -2854,17 +2854,17 @@ They are built with the configure process unless specified otherwise.
     #1 SMP x86_64 GNU/Linux       compilers for 64-bit applications;
     (koala)                           Version 4.1.2 20080704 (Red Hat 4.1.2-54)
                                       Version 4.8.2
-                                  Intel(R) C, C++, Fortran Compilers for 
-                                  applications running on Intel(R) 64; 
+                                  Intel(R) C, C++, Fortran Compilers for
+                                  applications running on Intel(R) 64;
                                       Version 14.0.2 (Build 20140120)
 
     Linux 2.6.32-431.11.2.el6    GNU C (gcc), Fortran (gfortran), C++ (g++)
     #1 SMP x86_64 GNU/Linux       compilers:
     (platypus)                       Version 4.4.7 20120313
                                      Version 4.8.2
-                                  PGI C, Fortran, C++ for 64-bit target on 
+                                  PGI C, Fortran, C++ for 64-bit target on
                                   x86-64;
-                                      Version 13.7-0 
+                                      Version 13.7-0
                                   Intel(R) C (icc), C++ (icpc), Fortran (icc)
                                   compilers:
                                      Version 14.0.2 (Build 20140120)
@@ -2890,7 +2890,7 @@ They are built with the configure process unless specified otherwise.
                                   Visual Studio 2010 w/ Intel Fortran 14 (cmake)
                                   Visual Studio 2012 w/ Intel Fortran 14 (cmake)
                                   Visual Studio 2013 w/ Intel Fortran 14 (cmake)
-                                  
+
     Windows 8.1                   Visual Studio 2012 w/ Intel Fortran 14 (cmake)
                                   Visual Studio 2013 w/ Intel Fortran 14 (cmake)
 
@@ -2914,14 +2914,14 @@ Tested Configuration Features Summary
 =====================================
 
     In the tables below
-          y   = tested 
+          y   = tested
           n   = not tested in this release
           C   = Cluster
           W   = Workstation
           x   = not working in this release
           dna = does not apply
           ( ) = footnote appears below second table
-          <blank> = testing incomplete on this feature or platform 
+          <blank> = testing incomplete on this feature or platform
 
 Platform                              C         F90/   F90      C++  zlib  SZIP
                                       parallel  F2003  parallel
@@ -2929,7 +2929,7 @@ Solaris2.11 32-bit                      n        y/y    n        y    y     y
 Solaris2.11 64-bit                      n        y/y    n        y    y     y
 Windows 7                               y        y/y    n        y    y     y
 Windows 7 x64                           y        y/y    n        y    y     y
-Windows 7 Cygwin                        n        y/y    n        y    y     n 
+Windows 7 Cygwin                        n        y/y    n        y    y     n
 Windows 8.1                             n        y/y    n        y    y     y
 Windows 8.1 x64                         n        y/y    n        y    y     y
 Mac OS X Lion 10.7.5 64-bit             n        y/y    n        y    y     y
@@ -2946,28 +2946,28 @@ CentOS 6.4 Linux 2.6.32 x86_64 Intel    n        y/y    n        y    y     y
 CentOS 6.4 Linux 2.6.32 x86_64 PGI      n        y/y    n        y    y     y
 Linux 2.6.32-431.11.2.el6.ppc64         n        y/n    n        y    y     y
 
-Platform                                 Shared  Shared    Shared    Thread-  
-                                         C libs  F90 libs  C++ libs  safe     
-Solaris2.11 32-bit                         y       y         y         y        
-Solaris2.11 64-bit                         y       y         y         y        
+Platform                                 Shared  Shared    Shared    Thread-
+                                         C libs  F90 libs  C++ libs  safe
+Solaris2.11 32-bit                         y       y         y         y
+Solaris2.11 64-bit                         y       y         y         y
 Windows 7                                  y       y         y         y
 Windows 7 x64                              y       y         y         y
 Windows 7 Cygwin                           n       n         n         y
 Windows 8.1                                y       y         y         y
 Windows 8.1 x64                            y       y         y         y
-Mac OS X Lion 10.7.5 64-bit                y       n         y         y        
-Mac OS X Mountain Lion 10.8.5 64-bit       y       n         y         y        
+Mac OS X Lion 10.7.5 64-bit                y       n         y         y
+Mac OS X Mountain Lion 10.8.5 64-bit       y       n         y         y
 Mac OS X Mavericks 10.9.5 64-bit           y       n         y         y
-AIX 5.3 32- and 64-bit                     y       n         n         y        
-CentOS 5.9 Linux 2.6.18-308 i686 GNU       y       y         y         y        
-CentOS 5.9 Linux 2.6.18-308 i686 Intel     y       y         y         n        
-CentOS 5.9 Linux 2.6.18-308 i686 PGI       y       y         y         n        
-CentOS 5.9 Linux 2.6.18 x86_64 GNU         y       y         y         y        
-CentOS 5.9 Linux 2.6.18 x86_64 Intel       y       y         y         n        
+AIX 5.3 32- and 64-bit                     y       n         n         y
+CentOS 5.9 Linux 2.6.18-308 i686 GNU       y       y         y         y
+CentOS 5.9 Linux 2.6.18-308 i686 Intel     y       y         y         n
+CentOS 5.9 Linux 2.6.18-308 i686 PGI       y       y         y         n
+CentOS 5.9 Linux 2.6.18 x86_64 GNU         y       y         y         y
+CentOS 5.9 Linux 2.6.18 x86_64 Intel       y       y         y         n
 CentOS 6.4 Linux 2.6.32 x86_64 GNU         y       y         y         n
 CentOS 6.4 Linux 2.6.32 x86_64 Intel       y       y         y         n
-CentOS 6.4 Linux 2.6.32 x86_64 PGI         y       y         y         n     
-Linux 2.6.32-431.11.2.el6.ppc64            y       y         y         n 
+CentOS 6.4 Linux 2.6.32 x86_64 PGI         y       y         y         n
+Linux 2.6.32-431.11.2.el6.ppc64            y       y         y         n
 
 Compiler versions for each platform are listed in the preceding
 "Supported Platforms" table.
@@ -2983,7 +2983,7 @@ The following platforms are not supported but have been tested for this release.
 
     Linux 2.6.18-431.11.2.el6     MPICH mpich 3.1.2 compiled with
     #1 SMP x86_64 GNU/Linux           gcc 4.9.1 and gfortran 4.9.1
-    (platypus)                    g95 (GCC 4.0.3 (g95 0.94!)   
+    (platypus)                    g95 (GCC 4.0.3 (g95 0.94!)
 
     FreeBSD 8.2-STABLE i386       gcc 4.5.4 [FreeBSD] 20110526
     (loyalty)                     gcc 4.6.1 20110527
@@ -3014,7 +3014,7 @@ The following platforms are not supported but have been tested for this release.
                                   gcc (Ubuntu/Linaro 4.9.1-0ubuntu1) 4.9.1
                                   GNU Fortran (Ubuntu/Linaro 4.9.1-0ubuntu1) 4.9.1
                                   (cmake and autotools)
-    
+
     Cray Linux Environment (CLE)  PrgEnv-pgi/4.2.34
     hopper.nersc.gov              pgcc 13.6-0 64-bit target on x86-64 Linux -tp istanbul
                                   pgf90 13.6-0 64-bit target on x86-64 Linux -tp istanbul
@@ -3029,7 +3029,7 @@ Known Problems
   (ADB - 2014/11/04 - HDFFV-8736)
 
 * On windows platforms in debug configurations, the VFD flush1 tests will fail
-  with the split and multi VFD drivers. These tests will display a modal debug 
+  with the split and multi VFD drivers. These tests will display a modal debug
   dialog which must be answered or wait for the test timeout to expire.
   The flush1 and flush2 tests will be skipped under debug for this release.
   (ADB - 2014/06/23 - HDFFV-8851)
@@ -3077,7 +3077,7 @@ Known Problems
   that "make prefix=XXX install" no longer works for shared libraries. It
   still works correctly for static libraries. Therefore, if you want to
   install the HDF5 shared libraries in a location such as /usr/local/hdf5,
-  you need to specify the location via the --prefix option during configure 
+  you need to specify the location via the --prefix option during configure
   time. E.g, ./configure --prefix=/usr/local/hdf5 ...
   (AKC - 2011/05/07 - HDFFV-7583)
 
@@ -3085,8 +3085,8 @@ Known Problems
   be terminated by the alarm signal.  If that happens, one can increase the
   alarm seconds (default is 1200 seconds = 20 minutes) by setting the
   environment variable, $HDF5_ALARM_SECONDS, to a larger value such as 3600
-  (60 minutes).  Note that the t_shapesame test may fail in some systems 
-  (see the "While working on the 1.8.6 release..." problem below).  If 
+  (60 minutes).  Note that the t_shapesame test may fail in some systems
+  (see the "While working on the 1.8.6 release..." problem below).  If
   it does, it will waste more time if $HDF5_ALARM_SECONDS is set
   to a larger value.
   (AKC - 2011/05/07)
@@ -3118,38 +3118,38 @@ Known Problems
   get_eoa and set_eoa callback functions.  A new callback function
   get_type_map was added in.  The public function H5FDrealloc was taken
   out in 1.8.  The problem only happens when users define their own driver
-  for 1.6 and try to plug in 1.8 library.  Because there's only one user 
-  complaining about it, we (Elena, Quincey, and I) decided to leave it as 
+  for 1.6 and try to plug in 1.8 library.  Because there's only one user
+  complaining about it, we (Elena, Quincey, and I) decided to leave it as
   it is (see bug report #1279).  Quincey will make a plan for 1.10.
   (SLU - 2010/02/02)
 
 * The --enable-static-exec configure flag will only statically link libraries
   if the static version of that library is present. If only the shared version
   of a library exists (i.e., most system libraries on Solaris, AIX, and Mac,
-  for example, only have shared versions), the flag should still result in a 
-  successful compilation, but note that the installed executables will not be 
-  fully static. Thus, the only guarantee on these systems is that the 
+  for example, only have shared versions), the flag should still result in a
+  successful compilation, but note that the installed executables will not be
+  fully static. Thus, the only guarantee on these systems is that the
   executable is statically linked with just the HDF5 library.
   (MAM - 2009/11/04)
-  
+
 * Parallel tests failed with 16 processes with data inconsistency at testphdf5
   / dataset_readAll. Parallel tests also failed with 32 and 64 processes with
   collective abort of all ranks at t_posix_compliant / allwrite_allread_blocks
   with MPI IO.
   (CMC - 2009/04/28)
 
-* A dataset created or rewritten with a v1.6.3 library or after cannot be read 
+* A dataset created or rewritten with a v1.6.3 library or after cannot be read
   with the v1.6.2 library or before when the Fletcher32 EDC filter is enabled.
-  There was a bug in the calculation of the Fletcher32 checksum in the 
+  There was a bug in the calculation of the Fletcher32 checksum in the
   library before v1.6.3; the checksum value was not consistent between big-
-  endian and little-endian systems.  This bug was fixed in Release 1.6.3.  
-  However, after fixing the bug, the checksum value was no longer the same as 
-  before on little-endian system.  Library releases after 1.6.4 can still read 
-  datasets created or rewritten with an HDF5 library of v1.6.2 or before.  
+  endian and little-endian systems.  This bug was fixed in Release 1.6.3.
+  However, after fixing the bug, the checksum value was no longer the same as
+  before on little-endian system.  Library releases after 1.6.4 can still read
+  datasets created or rewritten with an HDF5 library of v1.6.2 or before.
   (SLU - 2005/06/30)
 
 
-%%%%1.8.13%%%%   
+%%%%1.8.13%%%%
 
 
 HDF5 version 1.8.13 released on 2014-05-05
@@ -3158,10 +3158,10 @@ HDF5 version 1.8.13 released on 2014-05-05
 INTRODUCTION
 ============
 
-This document describes the differences between HDF5-1.8.12 and 
-HDF5-1.8.13, and contains information on the platforms tested and 
-known problems in HDF5-1.8.13. 
-For more details, see the files HISTORY-1_0-1_8_0_rc3.txt 
+This document describes the differences between HDF5-1.8.12 and
+HDF5-1.8.13, and contains information on the platforms tested and
+known problems in HDF5-1.8.13.
+For more details, see the files HISTORY-1_0-1_8_0_rc3.txt
 and HISTORY-1_8.txt in the release_docs/ directory of the HDF5 source.
 
 Links to the HDF5 1.8.13 source code, documentation, and additional materials
@@ -3173,18 +3173,18 @@ The HDF5 1.8.13 release can be obtained from:
 
      http://www.hdfgroup.org/HDF5/release/obtain5.html
 
-User documentation for 1.8.13 can be accessed directly at this location: 
+User documentation for 1.8.13 can be accessed directly at this location:
 
      http://www.hdfgroup.org/HDF5/doc/
 
-New features in the HDF5-1.8.x release series, including brief general 
-descriptions of some new and modified APIs, are described in the "What's New 
+New features in the HDF5-1.8.x release series, including brief general
+descriptions of some new and modified APIs, are described in the "What's New
 in 1.8.0?" document:
 
      http://www.hdfgroup.org/HDF5/doc/ADGuide/WhatsNew180.html
 
-All new and modified APIs are listed in detail in the "HDF5 Software Changes 
-from Release to Release" document, in the section "Release 1.8.13 (current 
+All new and modified APIs are listed in detail in the "HDF5 Software Changes
+from Release to Release" document, in the section "Release 1.8.13 (current
 release) versus Release 1.8.12":
 
      http://www.hdfgroup.org/HDF5/doc/ADGuide/Changes.html
@@ -3215,37 +3215,37 @@ New Features
 
     - CMake: Moved minimum CMake version to 2.8.11 which enables better library
       include processing. (ADB - 2014/03/26)
-    
-    - When configuring a thread-safe HDF5 Library it is no longer necessary 
-      to specify --enable-threadsafe with --with-pthreads if the Pthreads 
+
+    - When configuring a thread-safe HDF5 Library it is no longer necessary
+      to specify --enable-threadsafe with --with-pthreads if the Pthreads
       library is in a standard location.  (DER - 2014/04/11 HDFFV-8693)
 
     Library
     -------
-    - Added an H5free_memory API call. This should be used to free memory 
-      that has been allocated by HDF5 API calls. H5Tget_member_name and 
-      H5Pget_class_name are two examples. The main motivation for this call 
-      is Windows, where it is common for application code and the HDF5 Library 
-      to be using different C run-time libraries (CRT). Using the new call 
-      ensures that the same CRT handles both the allocation and free. This 
-      new function can also be useful in any case where the library uses a 
-      different memory manager than the application, such as when a debug 
-      memory manager is in use or when the HDF5 Library is wrapped for use 
-      in a managed language like Python or Java. Fixes HDFFV-7710, 8519, 
+    - Added an H5free_memory API call. This should be used to free memory
+      that has been allocated by HDF5 API calls. H5Tget_member_name and
+      H5Pget_class_name are two examples. The main motivation for this call
+      is Windows, where it is common for application code and the HDF5 Library
+      to be using different C run-time libraries (CRT). Using the new call
+      ensures that the same CRT handles both the allocation and free. This
+      new function can also be useful in any case where the library uses a
+      different memory manager than the application, such as when a debug
+      memory manager is in use or when the HDF5 Library is wrapped for use
+      in a managed language like Python or Java. Fixes HDFFV-7710, 8519,
       and 8851. (DER - 2014/04/11)
 
-    - The Core VFD (aka Memory VFD) can now be configured to track dirty 
-      regions in the file and only write out the changed regions on 
-      flush/close. Additionally, a "page aggregation" size can be set that 
-      will aggregate small writes into larger writes. For example, setting 
-      a 1 MiB page aggregation size will logically partition the the 
-      in-memory file into 1 MiB pages that will be written out in their 
-      entirety if even a single byte is dirtied. The feature is controlled 
-      via the new H5Pset/get_core_write_tracking() API call. A new 
-      "core_paged" target has been added to the check-vfd target in 
+    - The Core VFD (aka Memory VFD) can now be configured to track dirty
+      regions in the file and only write out the changed regions on
+      flush/close. Additionally, a "page aggregation" size can be set that
+      will aggregate small writes into larger writes. For example, setting
+      a 1 MiB page aggregation size will logically partition the the
+      in-memory file into 1 MiB pages that will be written out in their
+      entirety if even a single byte is dirtied. The feature is controlled
+      via the new H5Pset/get_core_write_tracking() API call. A new
+      "core_paged" target has been added to the check-vfd target in
       test/Makefile.am that exercises the feature over all HDF5 VFD-aware
       tests. (DER - 2014/04/12)
- 
+
     Parallel Library
     ----------------
     - Removed MPI-POSIX VFD, as it wasn't helping anyone and was just
@@ -3255,7 +3255,7 @@ New Features
 
     - Improved parallel I/O support to allow collective I/O on point
       selections. (QAK - 2014/03/15)
- 
+
     Tools
     -----
     - None
@@ -3266,7 +3266,7 @@ New Features
 
     Fortran API
     -----------
-    - Wrappers h5pset_file_image_f and h5pget_file_image_f were added to the 
+    - Wrappers h5pset_file_image_f and h5pget_file_image_f were added to the
       library. (MSB - 2014/1/2014)
 
     C++ API
@@ -3283,7 +3283,7 @@ New Features
             H5O_type_t childObjType(hsize_t index,
                 H5_index_t index_type=H5_INDEX_NAME,
                 H5_iter_order_t order=H5_ITER_INC, const char* objname=".")
-      + Wrappers to class DSetMemXferPropList for setting/getting a transform 
+      + Wrappers to class DSetMemXferPropList for setting/getting a transform
         property list (HDFFV-7907).
             DSetMemXferPropList(const char* expression);
             void setDataTransform(const char* expression)
@@ -3292,7 +3292,7 @@ New Features
             H5std_string getDataTransform()
       + Wrapper to CompType for setting size to compound datatype (HDFFV-8642).
             void setSize(size_t size)
-      + Overloaded functions to provide prototypes that declare constant 
+      + Overloaded functions to provide prototypes that declare constant
         arguments const (HDFFV-3384).  These include:
             DataSet::fillMemBuf
             DataSet::getVlenBufSize
@@ -3307,7 +3307,7 @@ New Features
             ssize_t getName(char* attr_name, size_t buf_size=0)
             ssize_t getName(H5std_string& attr_name, size_t buf_size=0)
             (BMR, 2014/04/15)
-      + A static wrapper to Exception for printing the error stack without an 
+      + A static wrapper to Exception for printing the error stack without an
 	instance of Exception
 	    static void printErrorStack(FILE* stream = stderr,
 						hid_t err_stack = H5E_DEFAULT);
@@ -3321,7 +3321,7 @@ Support for New Platforms, Languages, and Compilers
     supported platforms. (AKC - 2014/03/14 HDFFV-8704)
 
     Mac OS X 10.9 Mavericks is supported. (AKC - 2014/03/04 HDFFV-8694)
-                                  
+
 
 Bug Fixes since HDF5-1.8.12
 ===========================
@@ -3331,42 +3331,42 @@ Bug Fixes since HDF5-1.8.12
     - CMake: When CMake commands are executed individually on the command line
       and the external filters are being built, the CMAKE_BUILD_TYPE define
       must be set to the same value as the configuration
-      (-DCMAKE_BUILD_TYPE:STRING=Release if using -C Release). This is needed 
+      (-DCMAKE_BUILD_TYPE:STRING=Release if using -C Release). This is needed
       by the the szip and zlib filter build commands. (ADB - HDFFV-8695)
 
-    - CMake: Removed use of the XLATE_UTILITY program. 
+    - CMake: Removed use of the XLATE_UTILITY program.
       (ADB - 2014/03/28 HDFFV-8640)
 
     - CMake: Added missing quotes in setting the CMAKE_EXE_LINKER_FLAGS for the
       MPI option. (ADB - 2014/02/27 HDFFV-8674)
 
-    - CMake: Configuration of the HDF5 C++ or Fortran libraries with the 
+    - CMake: Configuration of the HDF5 C++ or Fortran libraries with the
       thread-safety feature.
 
       C++ and/or Fortran + thread-safe is enforced as a non-supported
       configuration. This matches the autotools. (DER - 2014/04/11)
 
     - CMake: Configuration of static HDF5 C library with the thread-safety
-      feature. 
+      feature.
 
       Static + thread-safe + Win32 threads is not a supported configuration
-      due to the inability to automatically clean up thread-local storage. 
-      This is expected to be fixed in a future release. In the meantime, a 
-      work-around that uses internal functionality may allow the combination 
-      to be used without resource leaks. Contact the help desk for more 
+      due to the inability to automatically clean up thread-local storage.
+      This is expected to be fixed in a future release. In the meantime, a
+      work-around that uses internal functionality may allow the combination
+      to be used without resource leaks. Contact the help desk for more
       information. (DER - 2014/04/11)
 
-    - Autotools: Several changes were done to configure and installcheck. 
+    - Autotools: Several changes were done to configure and installcheck.
 
       An export of LD_LIBRARY_PATH=<szip library location> was
       removed from configure; make installcheck was revised to run
-      scripts installed in share/hdf5_examples to use the installed h5cc, etc. 
-      to compile and run example source files also installed there. 
+      scripts installed in share/hdf5_examples to use the installed h5cc, etc.
+      to compile and run example source files also installed there.
 
-      Make installcheck will now fail when a shared szip or other external lib 
-      file cannot be found in the same manner that executables compiled and 
-      linked with h5cc will fail to run when those lib files cannot be found 
-      after install. Make installcheck should pass after setting 
+      Make installcheck will now fail when a shared szip or other external lib
+      file cannot be found in the same manner that executables compiled and
+      linked with h5cc will fail to run when those lib files cannot be found
+      after install. Make installcheck should pass after setting
       LD_LIBRARY_PATH to the szip location. (LRK - 2014/04/16)
 
     Library
@@ -3378,50 +3378,50 @@ Bug Fixes since HDF5-1.8.12
       either do not use parallel make or install Gnu Make to build the library.
       (AKC 2014/04/08 HDFFV-8738)
 
-    - H5R.c: H5Rget_name gave an assertion failure if the "name" parameter 
+    - H5R.c: H5Rget_name gave an assertion failure if the "name" parameter
       was NULL.
 
       Fixed H5Rget_name to return the size of the buffer needed to read a
-      name of the referenced object in this case. The size doesn't include 
-      the NULL terminator. H5Rget_name returns negative on failure. 
+      name of the referenced object in this case. The size doesn't include
+      the NULL terminator. H5Rget_name returns negative on failure.
       (MSB - 2014/01/22 HDFFV-8620)
 
     - H5Z.c: H5Zfilter_avail didn't check if a filter was available as a
       dynamically loaded filter. The error manifested itself in the h5repack
       tool when removing user-defined dynamically loaded filter.
 
-      Added a code to find the filter among the dynamically loaded filters 
-      after the function fails to find it among the registered filters. 
+      Added a code to find the filter among the dynamically loaded filters
+      after the function fails to find it among the registered filters.
       (ADB - 2014/03/03 HDFFV-8629)
 
-    - Memory leak: a memory leak was observed in conjunction to the 
-      H5TS_errstk_key_g thread-local variable allocated in the H5E_get_stack 
-      function in H5E.c. 
+    - Memory leak: a memory leak was observed in conjunction to the
+      H5TS_errstk_key_g thread-local variable allocated in the H5E_get_stack
+      function in H5E.c.
 
-      The shared HDF5 thread-safe library now no longer leaks thread-local 
-      storage resources on Windows with Win32 threads. Currently, there is 
-      no solution for this problem when HDF5 is statically built. We 
-      disabled the build of the static HDF5 thread-safe library with 
+      The shared HDF5 thread-safe library now no longer leaks thread-local
+      storage resources on Windows with Win32 threads. Currently, there is
+      no solution for this problem when HDF5 is statically built. We
+      disabled the build of the static HDF5 thread-safe library with
       Win32 threads. (DER - 2014/04/11 HDFFV-8518)
 
-    - H5Dio.c: Improved handling of NULL pointers to H5Dread/H5Dwrite 
+    - H5Dio.c: Improved handling of NULL pointers to H5Dread/H5Dwrite
       calls. Credit to Jason Newton (nevion@gmail.com) for the original patch.
 
-      H5Dwrite/read failed when a NULL pointer was passed for a data buffer 
+      H5Dwrite/read failed when a NULL pointer was passed for a data buffer
       and 0 elements were selected. Fixed. (QAK - 2014/04/16 HDFFV-8705)
 
     - Deprecated API (1_6 API): Improved handling of closing the library and
       re-accessing it with a deprecated routine.
 
-      When a program used a deprecated API (for example, H5Gcreate1), 
-      closed the library, and reopened it again to access a group, dataset, 
-      datatype, dataspace, attribute, or property list, HDF5 failed to 
+      When a program used a deprecated API (for example, H5Gcreate1),
+      closed the library, and reopened it again to access a group, dataset,
+      datatype, dataspace, attribute, or property list, HDF5 failed to
       provide an identifier for the object. Fixed.
       (NAF, QAK - 2014/04/16 HDFFV-8232)
 
     Parallel Library
     ----------------
-    - Fixed a missing H5F_Provisional module in HDF5mpio.f90 
+    - Fixed a missing H5F_Provisional module in HDF5mpio.f90
       (MSB - 2014/2/7 HDFFV-8651)
 
     Performance
@@ -3437,11 +3437,11 @@ Bug Fixes since HDF5-1.8.12
 
     - The h5dump and h5diff utilities occasionally produced different output
       between Linux and Windows systems. This has been fixed.
- 
-      This happened to datasets that used chunked storage, with default fill 
-      values, and some of the chunks had not been written. 
-      When the dataset was read, the library failed to write the default fill 
-      values to parts of the use buffer that were associated with the unwritten 
+
+      This happened to datasets that used chunked storage, with default fill
+      values, and some of the chunks had not been written.
+      When the dataset was read, the library failed to write the default fill
+      values to parts of the use buffer that were associated with the unwritten
       chunks.  (JP - 2014/05/01 HDFFV-8247)
 
     - The compress option is retired from bin/release.
@@ -3450,8 +3450,8 @@ Bug Fixes since HDF5-1.8.12
     - bin/release has a new option "zip" that produces a release zip file for
       the Windows platform. (AKC - 2014/04/24 HDFFV-8433)
 
-    - h5diff: Several failures relating to handling of strings attributes 
-      are fixed. 
+    - h5diff: Several failures relating to handling of strings attributes
+      are fixed.
 
       The tool crashed or gave an error message when one of the strings had
       fixed size type and another variable-length size type. h5diff now flags such
@@ -3460,13 +3460,13 @@ Bug Fixes since HDF5-1.8.12
       (AKC - 2014/04/18 HDFFV-8625, 8639, 8745)
 
     - h5repack: h5repack would not remove user-defined filters.
-      Fixed by modifying h5repack to check if the filter is registered or 
+      Fixed by modifying h5repack to check if the filter is registered or
       can be dynamically loaded. (ADB - 2014/03/03 HDFFV-8629)
 
     F90 API
     -------
-    - H5D_CHUNK_CACHE_NSLOTS_DFLT_F and H5D_CHUNK_CACHE_NBYTES_DFLT_F were 
-      changed from the default KIND for INTEGER to INTEGER of KIND size_t. 
+    - H5D_CHUNK_CACHE_NSLOTS_DFLT_F and H5D_CHUNK_CACHE_NBYTES_DFLT_F were
+      changed from the default KIND for INTEGER to INTEGER of KIND size_t.
       (MSB - 2014/3/31 HDFFV-8689)
 
     C++ API
@@ -3487,14 +3487,14 @@ Bug Fixes since HDF5-1.8.12
 
     Testing
     -------
-    - testhdf5 now exits with EXIT_SUCCESS(0) if no errors, else 
+    - testhdf5 now exits with EXIT_SUCCESS(0) if no errors, else
       EXIT_FAILURE(1). (AKC - 2014/01/27 HDFFV-8572)
 
     - The big test now pays attention to the HDF5_DRIVER environment variable.
       Previously, it would run all tests with the family, stdio, and sec2
-      virtual file drivers (VFDs) for each VFD in the check-vfd make target, 
-      regardless of the variable setting. It now checks the variable and 
-      either runs the appropriate VFD-specific tests or skips as needed. 
+      virtual file drivers (VFDs) for each VFD in the check-vfd make target,
+      regardless of the variable setting. It now checks the variable and
+      either runs the appropriate VFD-specific tests or skips as needed.
       This saves much testing time. Fixes HDFFV-8554. (DER - 2014/04/11)
 
 Supported Platforms
@@ -3522,20 +3522,20 @@ They are built with the configure process unless specified otherwise.
     #1 SMP x86_64 GNU/Linux       compilers for 64-bit applications;
     (koala)                           Version 4.1.2 20080704 (Red Hat 4.1.2-54)
                                       Version 4.8.2
-                                  PGI C, Fortran, C++ for 64-bit target on 
+                                  PGI C, Fortran, C++ for 64-bit target on
                                   x86-64;
-                                      Version 13.7-0 
-                                  Intel(R) C, C++, Fortran Compilers for 
-                                  applications running on Intel(R) 64; 
+                                      Version 13.7-0
+                                  Intel(R) C, C++, Fortran Compilers for
+                                  applications running on Intel(R) 64;
                                       Version 14.0.2 (Build 20140120)
 
     Linux 2.6.32-431.11.2.el6    GNU C (gcc), Fortran (gfortran), C++ (g++)
     #1 SMP x86_64 GNU/Linux       compilers:
     (platypus)                       Version 4.4.7 20120313
                                      Version 4.8.2
-                                  PGI C, Fortran, C++ for 64-bit target on 
+                                  PGI C, Fortran, C++ for 64-bit target on
                                   x86-64;
-                                      Version 13.7-0 
+                                      Version 13.7-0
                                   Intel(R) C (icc), C++ (icpc), Fortran (icc)
                                   compilers:
                                      Version 14.0.2 (Build 20140120)
@@ -3559,7 +3559,7 @@ They are built with the configure process unless specified otherwise.
     Windows 7 x64                 Visual Studio 2008 w/ Intel Fortran 14 (cmake)
                                   Visual Studio 2010 w/ Intel Fortran 14 (cmake)
                                   Visual Studio 2012 w/ Intel Fortran 14 (cmake)
-                                  
+
     Windows 8.1                   Visual Studio 2012 w/ Intel Fortran 14 (cmake)
 
     Windows 8.1 x64               Visual Studio 2012 w/ Intel Fortran 14 (cmake)
@@ -3581,14 +3581,14 @@ Tested Configuration Features Summary
 =====================================
 
     In the tables below
-          y   = tested 
+          y   = tested
           n   = not tested in this release
           C   = Cluster
           W   = Workstation
           x   = not working in this release
           dna = does not apply
           ( ) = footnote appears below second table
-          <blank> = testing incomplete on this feature or platform 
+          <blank> = testing incomplete on this feature or platform
 
 Platform                              C         F90/   F90      C++  zlib  SZIP
                                       parallel  F2003  parallel
@@ -3614,28 +3614,28 @@ CentOS 6.4 Linux 2.6.32 x86_64 PGI      n        y/y    n        y    y     y
 Linux 2.6.32-431.11.2.el6.ppc64         n        y/n    n        y    y     y
 OpenVMS IA64 V8.4                       n        y/n    n        y    y     n
 
-Platform                                 Shared  Shared    Shared    Thread-  
-                                         C libs  F90 libs  C++ libs  safe     
-Solaris2.11 32-bit                         y       y         y         y        
-Solaris2.11 64-bit                         y       y         y         y        
+Platform                                 Shared  Shared    Shared    Thread-
+                                         C libs  F90 libs  C++ libs  safe
+Solaris2.11 32-bit                         y       y         y         y
+Solaris2.11 64-bit                         y       y         y         y
 Windows 7                                  y       y         y         y
 Windows 7 x64                              y       y         y         y
 Windows 7 Cygwin                           n       n         n         y
 Windows 8.1                                y       y         y         y
 Windows 8.1 x64                            y       y         y         y
-Mac OS X Lion 10.7.3 64-bit                y       n         y         y        
-Mac OS X Mountain Lion 10.8.1 64-bit       y       n         y         y        
+Mac OS X Lion 10.7.3 64-bit                y       n         y         y
+Mac OS X Mountain Lion 10.8.1 64-bit       y       n         y         y
 Mac OS X Mavericks 10.9.1 64-bit           y       n         y         y
-AIX 5.3 32- and 64-bit                     y       n         n         y        
-CentOS 5.9 Linux 2.6.18-308 i686 GNU       y       y         y         y        
-CentOS 5.9 Linux 2.6.18-308 i686 Intel     y       y         y         n        
-CentOS 5.9 Linux 2.6.18-308 i686 PGI       y       y         y         n        
-CentOS 5.9 Linux 2.6.18 x86_64 GNU         y       y         y         y        
-CentOS 5.9 Linux 2.6.18 x86_64 Intel       y       y         y         n        
+AIX 5.3 32- and 64-bit                     y       n         n         y
+CentOS 5.9 Linux 2.6.18-308 i686 GNU       y       y         y         y
+CentOS 5.9 Linux 2.6.18-308 i686 Intel     y       y         y         n
+CentOS 5.9 Linux 2.6.18-308 i686 PGI       y       y         y         n
+CentOS 5.9 Linux 2.6.18 x86_64 GNU         y       y         y         y
+CentOS 5.9 Linux 2.6.18 x86_64 Intel       y       y         y         n
 CentOS 6.4 Linux 2.6.32 x86_64 GNU         y       y         y         n
 CentOS 6.4 Linux 2.6.32 x86_64 Intel       y       y         y         n
-CentOS 6.4 Linux 2.6.32 x86_64 PGI         y       y         y         n     
-Linux 2.6.32-431.11.2.el6.ppc64            y       y         y         n 
+CentOS 6.4 Linux 2.6.32 x86_64 PGI         y       y         y         n
+Linux 2.6.32-431.11.2.el6.ppc64            y       y         y         n
 OpenVMS IA64 V8.4                          n       n         n         n
 
 Compiler versions for each platform are listed in the preceding
@@ -3652,7 +3652,7 @@ The following platforms are not supported but have been tested for this release.
 
     Linux 2.6.18-431.11.2.el6     MPICH mpich 3.1 compiled with
     #1 SMP x86_64 GNU/Linux           gcc 4.8.2 and gfortran 4.8.2
-    (platypus)                    g95 (GCC 4.0.3 (g95 0.94!)   
+    (platypus)                    g95 (GCC 4.0.3 (g95 0.94!)
 
     FreeBSD 8.2-STABLE i386       gcc 4.5.4 [FreeBSD] 20110526
     (loyalty)                     gcc 4.6.1 20110527
@@ -3683,7 +3683,7 @@ The following platforms are not supported but have been tested for this release.
                                   gcc (Ubuntu/Linaro 4.8.1-10ubuntu8) 4.8.1
                                   GNU Fortran (Ubuntu/Linaro 4.8.1-10ubuntu8) 4.8.1
                                   (cmake and autotools)
-    
+
     Cray Linux Environment (CLE)  PrgEnv-pgi/4.0.46
     hopper.nersc.gov              pgcc 12.5-0 64-bit target on x86-64 Linux -tp shanghai
                                   pgf90 12.5-0 64-bit target on x86-64 Linux -tp shanghai
@@ -3704,20 +3704,20 @@ Known Problems
   (AKC 2014/05/02 HDFFV-8479)
 
 * Due to an Intel compiler bug introduced in version 14.0.1, the HDF5 FORTRAN
-  wrappers do not work with configure option --enable-fortran2003. 
-  However, the option --enable-fortran works with Intel 14.0.1. The compiler 
-  bug was fixed in Intel version 14.0.2 and resolved the issue. 
+  wrappers do not work with configure option --enable-fortran2003.
+  However, the option --enable-fortran works with Intel 14.0.1. The compiler
+  bug was fixed in Intel version 14.0.2 and resolved the issue.
   (MSB - 2014/4/15)
 
-* Due to a PGI compiler bug introduced in versions before 13.3 and versions 
-  after 14.2, the FORTRAN test 'Testing get file image' will fail. 
+* Due to a PGI compiler bug introduced in versions before 13.3 and versions
+  after 14.2, the FORTRAN test 'Testing get file image' will fail.
   (MSB - 2014/4/15)
 
-* On CYGWIN, when building the library dynamically, testing will fail on 
-  dynamically loaded filters. The test process will build dynamic filter 
-  libraries with the *.dll.a extension, and the HDF5 Library will be looking 
+* On CYGWIN, when building the library dynamically, testing will fail on
+  dynamically loaded filters. The test process will build dynamic filter
+  libraries with the *.dll.a extension, and the HDF5 Library will be looking
   for *.so libraries. Entered as issue HDFFV-8736. (ADB - 2014/04/14)
-  
+
 * A Gnu Make directive (.NOTPARALLEL) is added to fortran/test/Makefile.
   AIX native make does not support this directive and would fail if
   parallel make (e.g. make -j4) is used to build the library. AIX users
@@ -3742,7 +3742,7 @@ Known Problems
 
 * On OpenVMS, ZLIB 1.2.8 library doesn't work properly.  ZLIB 1.2.5 works
   fine.  So please use ZLIB 1.2.5 to build HDF5 library. (Issue VMS-5;
-  SLU 2013/09/19)  
+  SLU 2013/09/19)
 
 * When building using the Cray compilers on Cray machines, HDF5
   configure mistakenly thinks the compiler is an intel compiler and
@@ -3751,15 +3751,15 @@ Known Problems
   INSTALL_parallel for building on Hopper.
   (MSC - 2013/04/26 - HDFFV-8429)
 
-* The 5.9 C++ compiler on Sun failed to compile a C++ test ttypes.cpp.  It 
+* The 5.9 C++ compiler on Sun failed to compile a C++ test ttypes.cpp.  It
   complains with this message:
       "/home/hdf5/src/H5Vprivate.h", line 130: Error: __func__ is not defined.
-  
+
   The reason is that __func__ is a predefined identifier in C99 standard.  The
-  HDF5 C library uses it in H5private.h.  The test ttypes.cpp includes 
+  HDF5 C library uses it in H5private.h.  The test ttypes.cpp includes
   H5private.h (H5Tpkg.h<-H5Fprivate.h<-H5Vprivate.h<-H5private.h).  Sun's 5.9
   C++ compiler doesn't support __func__, thus fails to compile the C++ test.
-  But Sun's 5.11 C++ compiler does.  To check whether your Sun C++ compiler 
+  But Sun's 5.11 C++ compiler does.  To check whether your Sun C++ compiler
   knows this identifier, try to compile the following simple C++ program:
       #include<stdio.h>
 
@@ -3780,7 +3780,7 @@ Known Problems
 
    h5dump --no-compact-subset -d "AHFINDERDIRECT::ah_centroid_t[0] it=0 tl=0"
      tno-subset.h5
-  
+
   This is due to the embedded spaces in the dataset name being interpreted
   by the command script launcher as meta-characters, thus passing three
   arguments to h5dump's -d flag. The command passes if run by hand, just
@@ -3791,21 +3791,21 @@ Known Problems
   to aprun -np X, because the H5lib_settings.c file was not generated
   properly. Not setting those environment variables works, because
   configure was able to automatically detect that it's a Cray system
-  and used the proper launch commands when necessary. 
+  and used the proper launch commands when necessary.
   (MSC - 2012/04/18)
 
 * The data conversion test dt_arith.c fails in "long double" to integer
   conversion on Ubuntu 11.10 (3.0.0.13 kernel) with GCC 4.6.1 if the library
   is built with optimization -O3 or -O2.  The older GCC (4.5) or newer kernal
-  (3.2.2 on Fedora) doesn't have the problem.  Users should lower the 
-  optimization level (-O1 or -O0) by defining CFLAGS in the command line of 
+  (3.2.2 on Fedora) doesn't have the problem.  Users should lower the
+  optimization level (-O1 or -O0) by defining CFLAGS in the command line of
   "configure" like:
 
       CFLAGS=-O1 ./configure
 
   This will overwrite the library's default optimization level.
   (SLU - 2012/02/07 - HDFFV-7829)
-  This issue is no longer present on Ubuntu 12.10 (3.5.0 kernel) with 
+  This issue is no longer present on Ubuntu 12.10 (3.5.0 kernel) with
   gcc 4.7.2.
 
 * The STDIO VFD does not work on some architectures, possibly due to 32/64
@@ -3828,7 +3828,7 @@ Known Problems
   that "make prefix=XXX install" no longer works for shared libraries. It
   still works correctly for static libraries. Therefore, if you want to
   install the HDF5 shared libraries in a location such as /usr/local/hdf5,
-  you need to specify the location via the --prefix option during configure 
+  you need to specify the location via the --prefix option during configure
   time. E.g, ./configure --prefix=/usr/local/hdf5 ...
   (AKC - 2011/05/07 - HDFFV-7583)
 
@@ -3836,8 +3836,8 @@ Known Problems
   be terminated by the alarm signal.  If that happens, one can increase the
   alarm seconds (default is 1200 seconds = 20 minutes) by setting the
   environment variable, $HDF5_ALARM_SECONDS, to a larger value such as 3600
-  (60 minutes).  Note that the t_shapesame test may fail in some systems 
-  (see the "While working on the 1.8.6 release..." problem below).  If 
+  (60 minutes).  Note that the t_shapesame test may fail in some systems
+  (see the "While working on the 1.8.6 release..." problem below).  If
   it does, it will waste more time if $HDF5_ALARM_SECONDS is set
   to a larger value.
   (AKC - 2011/05/07)
@@ -3872,42 +3872,42 @@ Known Problems
   get_eoa and set_eoa callback functions.  A new callback function
   get_type_map was added in.  The public function H5FDrealloc was taken
   out in 1.8.  The problem only happens when users define their own driver
-  for 1.6 and try to plug in 1.8 library.  Because there's only one user 
-  complaining about it, we (Elena, Quincey, and I) decided to leave it as 
+  for 1.6 and try to plug in 1.8 library.  Because there's only one user
+  complaining about it, we (Elena, Quincey, and I) decided to leave it as
   it is (see bug report #1279).  Quincey will make a plan for 1.10.
   (SLU - 2010/02/02)
 
 * The --enable-static-exec configure flag will only statically link libraries
   if the static version of that library is present. If only the shared version
   of a library exists (i.e., most system libraries on Solaris, AIX, and Mac,
-  for example, only have shared versions), the flag should still result in a 
-  successful compilation, but note that the installed executables will not be 
-  fully static. Thus, the only guarantee on these systems is that the 
+  for example, only have shared versions), the flag should still result in a
+  successful compilation, but note that the installed executables will not be
+  fully static. Thus, the only guarantee on these systems is that the
   executable is statically linked with just the HDF5 library.
   (MAM - 2009/11/04)
-  
+
 * Parallel tests failed with 16 processes with data inconsistency at testphdf5
   / dataset_readAll. Parallel tests also failed with 32 and 64 processes with
   collective abort of all ranks at t_posix_compliant / allwrite_allread_blocks
   with MPI IO.
   (CMC - 2009/04/28)
 
-* On an Intel 64 Linux cluster (RH 4, Linux 2.6.9) with Intel 10.0 compilers, 
-  use -mp -O1 compilation flags to build the libraries. A higher level of 
-  optimization causes failures in several HDF5 library tests. 
+* On an Intel 64 Linux cluster (RH 4, Linux 2.6.9) with Intel 10.0 compilers,
+  use -mp -O1 compilation flags to build the libraries. A higher level of
+  optimization causes failures in several HDF5 library tests.
 
-* A dataset created or rewritten with a v1.6.3 library or after cannot be read 
+* A dataset created or rewritten with a v1.6.3 library or after cannot be read
   with the v1.6.2 library or before when the Fletcher32 EDC filter is enabled.
-  There was a bug in the calculation of the Fletcher32 checksum in the 
+  There was a bug in the calculation of the Fletcher32 checksum in the
   library before v1.6.3; the checksum value was not consistent between big-
-  endian and little-endian systems.  This bug was fixed in Release 1.6.3.  
-  However, after fixing the bug, the checksum value was no longer the same as 
-  before on little-endian system.  Library releases after 1.6.4 can still read 
-  datasets created or rewritten with an HDF5 library of v1.6.2 or before.  
+  endian and little-endian systems.  This bug was fixed in Release 1.6.3.
+  However, after fixing the bug, the checksum value was no longer the same as
+  before on little-endian system.  Library releases after 1.6.4 can still read
+  datasets created or rewritten with an HDF5 library of v1.6.2 or before.
   (SLU - 2005/06/30)
 
 
-%%%%1.8.12%%%%   
+%%%%1.8.12%%%%
 
 
 HDF5 version 1.8.12 released on 2013-11-04
@@ -3916,10 +3916,10 @@ HDF5 version 1.8.12 released on 2013-11-04
 INTRODUCTION
 ============
 
-This document describes the differences between HDF5-1.8.11 and 
-HDF5-1.8.12, and contains information on the platforms tested and 
-known problems in HDF5-1.8.12. 
-For more details, see the files HISTORY-1_0-1_8_0_rc3.txt 
+This document describes the differences between HDF5-1.8.11 and
+HDF5-1.8.12, and contains information on the platforms tested and
+known problems in HDF5-1.8.12.
+For more details, see the files HISTORY-1_0-1_8_0_rc3.txt
 and HISTORY-1_8.txt in the release_docs/ directory of the HDF5 source.
 
 Links to the HDF5 1.8.12 source code, documentation, and additional materials
@@ -3931,18 +3931,18 @@ The HDF5 1.8.12 release can be obtained from:
 
      http://www.hdfgroup.org/HDF5/release/obtain5.html
 
-User documentation for 1.8.12 can be accessed directly at this location: 
+User documentation for 1.8.12 can be accessed directly at this location:
 
      http://www.hdfgroup.org/HDF5/doc/
 
-New features in the HDF5-1.8.x release series, including brief general 
-descriptions of some new and modified APIs, are described in the "What's New 
+New features in the HDF5-1.8.x release series, including brief general
+descriptions of some new and modified APIs, are described in the "What's New
 in 1.8.0?" document:
 
      http://www.hdfgroup.org/HDF5/doc/ADGuide/WhatsNew180.html
 
-All new and modified APIs are listed in detail in the "HDF5 Software Changes 
-from Release to Release" document, in the section "Release 1.8.12 (current 
+All new and modified APIs are listed in detail in the "HDF5 Software Changes
+from Release to Release" document, in the section "Release 1.8.12 (current
 release) versus Release 1.8.11":
 
      http://www.hdfgroup.org/HDF5/doc/ADGuide/Changes.html
@@ -3974,25 +3974,25 @@ New Features
       The cmake option is -DH5_DEFAULT_PLUGINDIR:PATH=location.
       HDFFV-8513.  (ADB 2013/09/04)
     - Renamed FFLAGS to FCFLAGS in configure. (ADB 2013/08/13)
-    - CMake can now package a compressed examples file, the default for 
+    - CMake can now package a compressed examples file, the default for
       Windows binaries from HDF Group.  (ADB  - 2013/07/22)
-    
+
     Library
     -------
     - None
- 
+
     Parallel Library
     ----------------
     - None
- 
+
     Tools
     -----
-    - h5repack: Added the ability to use plugin filters to read and write 
-              files. The option uses the filter number. HDFFV-8345 
+    - h5repack: Added the ability to use plugin filters to read and write
+              files. The option uses the filter number. HDFFV-8345
               (ADB - 2013/09/04).
-    - h5dump: Added the option -N --any_path, which searches the file for 
+    - h5dump: Added the option -N --any_path, which searches the file for
               paths that match the search path. HDFFV-7989 (ADB - 2013/08/12).
-    - h5dump: Added the optional arg 0 to -A, which excludes attributes 
+    - h5dump: Added the optional arg 0 to -A, which excludes attributes
               from display. HDFFV-8134 (ADB - 2013/08/01).
 
     High-Level APIs
@@ -4033,7 +4033,7 @@ Bug Fixes since HDF5-1.8.11
     Configuration
     -------------
     - Modified H5detect.c to scan floating point types for padding bits before
-      analyzing the type further.  This should fix problems with gcc 4.8. 
+      analyzing the type further.  This should fix problems with gcc 4.8.
       (NAF - 2013/09/19 - HDFFV-8523/HDFFV-8500)
     - HDF5 rpaths are no longer encoded in the library files when configured
       with --disable-sharedlib-rpath. (LRK-2013-09-23 - HDFFV-8276)
@@ -4043,7 +4043,7 @@ Bug Fixes since HDF5-1.8.11
     - Added const qualifier to source buffer parameters in H5Dgather and
       H5D_scatter_func_t (H5Dscatter callback).  (NAF - 2013/7/09)
 
-    - CMake now creates *.so.{lt_version} files with the same version as 
+    - CMake now creates *.so.{lt_version} files with the same version as
       configure.  (ADB  - 2013/06/05 HDFFV-8437)
 
     Parallel Library
@@ -4056,14 +4056,14 @@ Bug Fixes since HDF5-1.8.11
 
     Tools
     -----
-    - h5dump: Added the option -N --any_path, which searches the file for 
+    - h5dump: Added the option -N --any_path, which searches the file for
               paths that match the search path. HDFFV-7989 (ADB - 2013/08/12).
-    - h5dump: Added the optional arg 0 to -A, which excludes attributes 
+    - h5dump: Added the optional arg 0 to -A, which excludes attributes
               from display. HDFFV-8134 (ADB - 2013/08/01).
     - h5dump correctly exports subsetted data to a file, using the --output
       option.  (ADB  - 2013/06/07 HDFFV-8447)
     - h5cc and other compile scripts now default to linking shared libraries
-      when HDF5 is configured with the --disable-static option.  
+      when HDF5 is configured with the --disable-static option.
       (LRK - 2013-09-23 - HDFFV-8141)
 
     F90 API
@@ -4114,20 +4114,20 @@ They are built with the configure process unless specified otherwise.
     #1 SMP x86_64 GNU/Linux       compilers for 64-bit applications;
     (koala)                           Version 4.1.2 20080704 (Red Hat 4.1.2-54)
                                       Version 4.8.1
-                                  PGI C, Fortran, C++ for 64-bit target on 
+                                  PGI C, Fortran, C++ for 64-bit target on
                                   x86-64;
-                                      Version 13.7-0 
-                                  Intel(R) C, C++, Fortran Compilers for 
-                                  applications running on Intel(R) 64; 
+                                      Version 13.7-0
+                                  Intel(R) C, C++, Fortran Compilers for
+                                  applications running on Intel(R) 64;
                                       Version 13.1.3 (Build 20130607)
 
     Linux 2.6.32-358.18.1.el6      GNU C (gcc), Fortran (gfortran), C++ (g++)
     #1 SMP x86_64 GNU/Linux       compilers:
     (platypus)                       Version 4.4.7 20120313
                                      Version 4.8.1
-                                  PGI C, Fortran, C++ for 64-bit target on 
+                                  PGI C, Fortran, C++ for 64-bit target on
                                   x86-64;
-                                      Version 13.7-0 
+                                      Version 13.7-0
                                   Intel(R) C (icc), C++ (icpc), Fortran (icc)
                                   compilers:
                                      Version 13.1.3 (Build 20130607)
@@ -4170,22 +4170,22 @@ They are built with the configure process unless specified otherwise.
     64-bit                        gfortran GNU Fortran (GCC) 4.6.2
     (wren)                        Intel icc/icpc/ifort version 13.0.3
 
-    OpenVMS  IA64 V8.4            HP C V7.3-018         
+    OpenVMS  IA64 V8.4            HP C V7.3-018
                                   HP Fortran V8.2-104939-50H96
-                                  HP C++ V7.4-004 
+                                  HP C++ V7.4-004
 
 Tested Configuration Features Summary
 =====================================
 
     In the tables below
-          y   = tested 
+          y   = tested
           n   = not tested in this release
           C   = Cluster
           W   = Workstation
           x   = not working in this release
           dna = does not apply
           ( ) = footnote appears below second table
-          <blank> = testing incomplete on this feature or platform 
+          <blank> = testing incomplete on this feature or platform
 
 Platform                              C         F90/   F90      C++  zlib  SZIP
                                       parallel  F2003  parallel
@@ -4211,28 +4211,28 @@ CentOS 6.4 Linux 2.6.32 x86_64 Intel    n        y/y    n        y    y     y
 Linux 2.6.32-358.2.1.el6.ppc64          n        y/n    n        y    y     y
 OpenVMS IA64 V8.4                       n        y/n    n        y    y     n
 
-Platform                                 Shared  Shared    Shared    Thread-  
-                                         C libs  F90 libs  C++ libs  safe     
-Solaris2.11 32-bit                         y       y         y         y        
-Solaris2.11 64-bit                         y       y         y         y        
+Platform                                 Shared  Shared    Shared    Thread-
+                                         C libs  F90 libs  C++ libs  safe
+Solaris2.11 32-bit                         y       y         y         y
+Solaris2.11 64-bit                         y       y         y         y
 Windows 7                                  y       y         y         y
 Windows 7 x64                              y       y         y         y
 Windows 7 Cygwin                           n       n         n         y
 Windows 8.1                                y       y         y         y
 Windows 8.1 x64                            y       y         y         y
-Mac OS X Snow Leopard 10.6.8 64-bit        y       n         y         n        
-Mac OS X Lion 10.7.3 64-bit                y       n         y         y        
-Mac OS X Mountain Lion 10.8.1 64-bit       y       n         y         y        
-AIX 5.3 32- and 64-bit                     y       n         n         y        
-CentOS 5.9 Linux 2.6.18-308 i686 GNU       y       y         y         y        
-CentOS 5.9 Linux 2.6.18-308 i686 Intel     y       y         y         n        
-CentOS 5.9 Linux 2.6.18-308 i686 PGI       y       y         y         n        
-CentOS 5.9 Linux 2.6.18 x86_64 GNU         y       y         y         y        
-CentOS 5.9 Linux 2.6.18 x86_64 Intel       y       y         y         n        
-CentOS 5.9 Linux 2.6.18 x86_64 PGI         y       y         y         n     
+Mac OS X Snow Leopard 10.6.8 64-bit        y       n         y         n
+Mac OS X Lion 10.7.3 64-bit                y       n         y         y
+Mac OS X Mountain Lion 10.8.1 64-bit       y       n         y         y
+AIX 5.3 32- and 64-bit                     y       n         n         y
+CentOS 5.9 Linux 2.6.18-308 i686 GNU       y       y         y         y
+CentOS 5.9 Linux 2.6.18-308 i686 Intel     y       y         y         n
+CentOS 5.9 Linux 2.6.18-308 i686 PGI       y       y         y         n
+CentOS 5.9 Linux 2.6.18 x86_64 GNU         y       y         y         y
+CentOS 5.9 Linux 2.6.18 x86_64 Intel       y       y         y         n
+CentOS 5.9 Linux 2.6.18 x86_64 PGI         y       y         y         n
 CentOS 6.4 Linux 2.6.32 x86_64 GNU         y       y         y         n
 CentOS 6.4 Linux 2.6.32 x86_64 Intel       y       y         y         n
-Linux 2.6.32-358.2.1.el6.ppc64             y       y         y         n 
+Linux 2.6.32-358.2.1.el6.ppc64             y       y         y         n
 OpenVMS IA64 V8.4                          n       n         n         n
 
 Compiler versions for each platform are listed in the preceding
@@ -4250,7 +4250,7 @@ The following platforms are not supported but have been tested for this release.
     Linux 2.6.18-308.16.1.el5     MPICH mpich2-1.4.1p1 compiled with
     #1 SMP x86_64 GNU/Linux           gcc 4.1.2 and gfortran 4.1.2
     (koala)                       g95 (GCC 4.0.3 (g95 0.94!)
-                                  
+
     FreeBSD 8.2-STABLE i386       gcc 4.5.4 [FreeBSD] 20110526
     (loyalty)                     gcc 4.6.1 20110527
                                   g++ 4.6.1 20110527
@@ -4273,14 +4273,14 @@ The following platforms are not supported but have been tested for this release.
 
     SUSE 12.3 3.7.10-1.16-desktop #1 SMP PREEMPT x86_64 x86_64 x86_64 GNU/Linux
                                   gcc (SUSE Linux) 4.7.2
-                                  GNU Fortran (SUSE Linux) 4.7.2 
+                                  GNU Fortran (SUSE Linux) 4.7.2
                                   (cmake and autotools)
 
     Ubuntu 13.04 3.8.0-30-generic #44-Ubuntu SMP x86_64 GNU/Linux
                                   gcc (Ubuntu/Linaro 4.7.3-1ubuntu1) 4.7.3
                                   GNU Fortran (Ubuntu/Linaro 4.7.3-1ubuntu1) 4.7.3
                                   (cmake and autotools)
-    
+
     Cray Linux Environment (CLE)  PrgEnv-pgi/4.0.46
     hopper.nersc.gov              pgcc 12.5-0 64-bit target on x86-64 Linux -tp shanghai
                                   pgf90 12.5-0 64-bit target on x86-64 Linux -tp shanghai
@@ -4294,22 +4294,22 @@ Known Problems
   is built in place. The issue will be addressed in the 1.8.13 release. We
   recommend to use build directory to compile and test HDF5 as described
   in the INSTALL file, section 4.2.
- 
+
 * Source directory names with spaces in them will cause failures in configure
-  or make on Mac (HDFFV-8152), Linux, and probably all other platforms.  If a 
-  configure command with a space is run from a build directory, it will exit 
-  with an error message:  "checking whether build environment is sane... 
-  configure: error: unsafe srcdir value: '/scr/lrknox/hdf5 v1.8.12'".  If 
-  configure is run inside or below the directory with the space in the name, 
-  libtool will get the directory path from the system, put the part of the 
-  path before the space in the libdir variable in .../src/libhdf5.la, and 
-  then fail to find the nonexistent directory.  This is a known libtool issue 
-  and the suggested workaround is to rename the directory without spaces. 
+  or make on Mac (HDFFV-8152), Linux, and probably all other platforms.  If a
+  configure command with a space is run from a build directory, it will exit
+  with an error message:  "checking whether build environment is sane...
+  configure: error: unsafe srcdir value: '/scr/lrknox/hdf5 v1.8.12'".  If
+  configure is run inside or below the directory with the space in the name,
+  libtool will get the directory path from the system, put the part of the
+  path before the space in the libdir variable in .../src/libhdf5.la, and
+  then fail to find the nonexistent directory.  This is a known libtool issue
+  and the suggested workaround is to rename the directory without spaces.
   (LRK - 2013/10/22)
 
 * CLANG compiler with the options -fcatch-undefined-behavior and -ftrapv
-  catches some undefined behavior in the alignment algorithm of the macro 
-  DETECT_I in H5detect.c (HDFFV-8147). This issue will be addressed in the 
+  catches some undefined behavior in the alignment algorithm of the macro
+  DETECT_I in H5detect.c (HDFFV-8147). This issue will be addressed in the
   next release.  (SLU - 2013/10/16)
 
 * Running make check for the tools can fail in the tools tests if make was not
@@ -4327,7 +4327,7 @@ Known Problems
 
 * On OpenVMS, ZLIB 1.2.8 library doesn't work properly.  ZLIB 1.2.5 works
   fine.  So please use ZLIB 1.2.5 to build HDF5 library. (Issue VMS-5;
-  SLU 2013/09/19)  
+  SLU 2013/09/19)
 
 * When building using the Cray compilers on Cray machines, HDF5
   configure mistakenly thinks the compiler is an intel compiler and
@@ -4344,15 +4344,15 @@ Known Problems
   spurious data values has only been encountered on Windows 32-bit systems.
   (Issue HDFFV-8247; JP - 2013/03/27)
 
-* The 5.9 C++ compiler on Sun failed to compile a C++ test ttypes.cpp.  It 
+* The 5.9 C++ compiler on Sun failed to compile a C++ test ttypes.cpp.  It
   complains with this message:
       "/home/hdf5/src/H5Vprivate.h", line 130: Error: __func__ is not defined.
-  
+
   The reason is that __func__ is a predefined identifier in C99 standard.  The
-  HDF5 C library uses it in H5private.h.  The test ttypes.cpp includes 
+  HDF5 C library uses it in H5private.h.  The test ttypes.cpp includes
   H5private.h (H5Tpkg.h<-H5Fprivate.h<-H5Vprivate.h<-H5private.h).  Sun's 5.9
   C++ compiler doesn't support __func__, thus fails to compile the C++ test.
-  But Sun's 5.11 C++ compiler does.  To check whether your Sun C++ compiler 
+  But Sun's 5.11 C++ compiler does.  To check whether your Sun C++ compiler
   knows this identifier, try to compile the following simple C++ program:
       #include<stdio.h>
 
@@ -4373,7 +4373,7 @@ Known Problems
 
    h5dump --no-compact-subset -d "AHFINDERDIRECT::ah_centroid_t[0] it=0 tl=0"
      tno-subset.h5
-  
+
   This is due to the embedded spaces in the dataset name being interpreted
   by the command script launcher as meta-characters, thus passing three
   arguments to h5dump's -d flag. The command passes if run by hand, just
@@ -4384,21 +4384,21 @@ Known Problems
   to aprun -np X, because the H5lib_settings.c file was not generated
   properly. Not setting those environment variables works, because
   configure was able to automatically detect that it is a Cray system
-  and used the proper launch commands when necessary. 
+  and used the proper launch commands when necessary.
   (MSC - 2012/04/18)
 
 * The data conversion test dt_arith.c fails in "long double" to integer
   conversion on Ubuntu 11.10 (3.0.0.13 kernel) with GCC 4.6.1 if the library
   is built with optimization -O3 or -O2.  The older GCC (4.5) or newer kernel
-  (3.2.2 on Fedora) do not have the problem.  Users should lower the 
-  optimization level (-O1 or -O0) by defining CFLAGS in the command line of 
+  (3.2.2 on Fedora) do not have the problem.  Users should lower the
+  optimization level (-O1 or -O0) by defining CFLAGS in the command line of
   "configure" like:
 
       CFLAGS=-O1 ./configure
 
   This will overwrite the library's default optimization level.
   (SLU - 2012/02/07 - HDFFV-7829)
-  This issue is no longer present on Ubuntu 12.10 (3.5.0 kernel) with 
+  This issue is no longer present on Ubuntu 12.10 (3.5.0 kernel) with
   gcc 4.7.2.
 
 * The STDIO VFD does not work on some architectures, possibly due to 32/64
@@ -4421,7 +4421,7 @@ Known Problems
   that "make prefix=XXX install" no longer works for shared libraries. It
   still works correctly for static libraries. Therefore, if you want to
   install the HDF5 shared libraries in a location such as /usr/local/hdf5,
-  you need to specify the location via the --prefix option during configure 
+  you need to specify the location via the --prefix option during configure
   time. E.g, ./configure --prefix=/usr/local/hdf5 ...
   (AKC - 2011/05/07 - HDFFV-7583)
 
@@ -4429,8 +4429,8 @@ Known Problems
   be terminated by the alarm signal.  If that happens, one can increase the
   alarm seconds (default is 1200 seconds = 20 minutes) by setting the
   environment variable, $HDF5_ALARM_SECONDS, to a larger value such as 3600
-  (60 minutes).  Note that the t_shapesame test may fail in some systems 
-  (see the "While working on the 1.8.6 release..." problem below).  If 
+  (60 minutes).  Note that the t_shapesame test may fail in some systems
+  (see the "While working on the 1.8.6 release..." problem below).  If
   it does, it will waste more time if $HDF5_ALARM_SECONDS is set
   to a larger value.
   (AKC - 2011/05/07)
@@ -4465,42 +4465,42 @@ Known Problems
   get_eoa and set_eoa callback functions.  A new callback function
   get_type_map was added in.  The public function H5FDrealloc was taken
   out in 1.8.  The problem only happens when users define their own driver
-  for 1.6 and try to plug in 1.8 library.  Because there's only one user 
-  complaining about it, we (Elena, Quincey, and I) decided to leave it as 
+  for 1.6 and try to plug in 1.8 library.  Because there's only one user
+  complaining about it, we (Elena, Quincey, and I) decided to leave it as
   it is (see bug report #1279).  Quincey will make a plan for 1.10.
   (SLU - 2010/02/02)
 
 * The --enable-static-exec configure flag will only statically link libraries
   if the static version of that library is present. If only the shared version
   of a library exists (i.e., most system libraries on Solaris, AIX, and Mac,
-  for example, only have shared versions), the flag should still result in a 
-  successful compilation, but note that the installed executables will not be 
-  fully static. Thus, the only guarantee on these systems is that the 
+  for example, only have shared versions), the flag should still result in a
+  successful compilation, but note that the installed executables will not be
+  fully static. Thus, the only guarantee on these systems is that the
   executable is statically linked with just the HDF5 library.
   (MAM - 2009/11/04)
-  
+
 * Parallel tests failed with 16 processes with data inconsistency at testphdf5
   / dataset_readAll. Parallel tests also failed with 32 and 64 processes with
   collective abort of all ranks at t_posix_compliant / allwrite_allread_blocks
   with MPI IO.
   (CMC - 2009/04/28)
 
-* On an Intel 64 Linux cluster (RH 4, Linux 2.6.9) with Intel 10.0 compilers, 
-  use -mp -O1 compilation flags to build the libraries. A higher level of 
-  optimization causes failures in several HDF5 library tests. 
+* On an Intel 64 Linux cluster (RH 4, Linux 2.6.9) with Intel 10.0 compilers,
+  use -mp -O1 compilation flags to build the libraries. A higher level of
+  optimization causes failures in several HDF5 library tests.
 
-* A dataset created or rewritten with a v1.6.3 library or after cannot be read 
+* A dataset created or rewritten with a v1.6.3 library or after cannot be read
   with the v1.6.2 library or before when the Fletcher32 EDC filter is enabled.
-  There was a bug in the calculation of the Fletcher32 checksum in the 
+  There was a bug in the calculation of the Fletcher32 checksum in the
   library before v1.6.3; the checksum value was not consistent between big-
-  endian and little-endian systems.  This bug was fixed in Release 1.6.3.  
-  However, after fixing the bug, the checksum value was no longer the same as 
-  before on little-endian system.  Library releases after 1.6.4 can still read 
-  datasets created or rewritten with an HDF5 library of v1.6.2 or before.  
+  endian and little-endian systems.  This bug was fixed in Release 1.6.3.
+  However, after fixing the bug, the checksum value was no longer the same as
+  before on little-endian system.  Library releases after 1.6.4 can still read
+  datasets created or rewritten with an HDF5 library of v1.6.2 or before.
   (SLU - 2005/06/30)
 
 
-%%%%1.8.11%%%%   
+%%%%1.8.11%%%%
 
 
 HDF5 version 1.8.11 released on 2013-05-08
@@ -4509,10 +4509,10 @@ HDF5 version 1.8.11 released on 2013-05-08
 INTRODUCTION
 ============
 
-This document describes the differences between HDF5-1.8.10 and 
-HDF5-1.8.11-*, and contains information on the platforms tested and 
-known problems in HDF5-1.8.11-*. 
-For more details, see the files HISTORY-1_0-1_8_0_rc3.txt 
+This document describes the differences between HDF5-1.8.10 and
+HDF5-1.8.11-*, and contains information on the platforms tested and
+known problems in HDF5-1.8.11-*.
+For more details, see the files HISTORY-1_0-1_8_0_rc3.txt
 and HISTORY-1_8.txt in the release_docs/ directory of the HDF5 source.
 
 Links to the HDF5 1.8.11 source code, documentation, and additional materials
@@ -4524,18 +4524,18 @@ The HDF5 1.8.11 release can be obtained from:
 
      http://www.hdfgroup.org/HDF5/release/obtain5.html
 
-User documentation for 1.8.11 can be accessed directly at this location: 
+User documentation for 1.8.11 can be accessed directly at this location:
 
      http://www.hdfgroup.org/HDF5/doc/
 
-New features in the HDF5-1.8.x release series, including brief general 
-descriptions of some new and modified APIs, are described in the "What's New 
+New features in the HDF5-1.8.x release series, including brief general
+descriptions of some new and modified APIs, are described in the "What's New
 in 1.8.0?" document:
 
      http://www.hdfgroup.org/HDF5/doc/ADGuide/WhatsNew180.html
 
-All new and modified APIs are listed in detail in the "HDF5 Software Changes 
-from Release to Release" document, in the section "Release 1.8.11 (current 
+All new and modified APIs are listed in detail in the "HDF5 Software Changes
+from Release to Release" document, in the section "Release 1.8.11 (current
 release) versus Release 1.8.10":
 
      http://www.hdfgroup.org/HDF5/doc/ADGuide/Changes.html
@@ -4570,11 +4570,11 @@ New Features
     - A new tool, cmakehdf5, which is a build command script similar to
       buildhdf5 is added and is available in the bin directory.
       (AKC - 2013/01/16 HDFFV-8336)
-    
+
     Library
     -------
     - The library can load filter libraries dynamically during runtime.  Users
-      can set the search path through environment variable HDF5_PLUGIN_PATH 
+      can set the search path through environment variable HDF5_PLUGIN_PATH
       and call H5Pset_filter to enable a dynamic filter. (SLU - 2013/04/08)
     - Added new API functions H5Dscatter and H5Dgather to scatter data to and
       and gather data from a selection within a memory buffer.
@@ -4582,11 +4582,11 @@ New Features
     - The library now supports the data conversion from enumeration to numeric
       (integer and floating-point number) datatypes. See Issue HDFFV-8221.
       (SLU - 2012/10/23)
- 
+
     Parallel Library
     ----------------
     - None
- 
+
     Tools
     -----
     - h5dump: added new option -O or -ddl to output the ddl text to a file. This
@@ -4595,8 +4595,8 @@ New Features
 
     High-Level APIs
     ---------------
-    - A new API function, H5DOwrite_chunk.  This function writes a data chunk 
-      directly into a file, bypassing hyperslab selection, data conversion, 
+    - A new API function, H5DOwrite_chunk.  This function writes a data chunk
+      directly into a file, bypassing hyperslab selection, data conversion,
       and the filter pipeline.  The user must be careful with the function and
       clearly understand the I/O process of the library. (SLU - 2013/2/11)
 
@@ -4605,11 +4605,11 @@ New Features
     - New API functions added (MSB - 2013/3/23):
 
       h5odecr_refcount_f, h5oexists_by_name_f, h5oget_comment_f,
-      h5oget_comment_by_name_f, h5oincr_refcount_f, h5oopen_by_idx_f, 
+      h5oget_comment_by_name_f, h5oincr_refcount_f, h5oopen_by_idx_f,
       h5oset_comment_f, h5oset_comment_by_name_f, h5oset_comment_by_name_f
 
       F2003: h5oget_info_f, h5oget_info_by_idx_f, h5ovisit_by_name_f
-    
+
 
     C++ API
     -------
@@ -4631,24 +4631,24 @@ Bug Fixes since HDF5-1.8.10
     - Fixed Thread-safe configure failure for the AIX platform.
       (AKC - 2013/04/19 HDFFV-8390)
     - Configure will check the result of header searches before searching for
-      the library. 
+      the library.
       Fixes HDFFV-8257 (ADB 2013/03/04)
-    - HDF does not support building SHARED Fortran libraries on OSX. Added 
-      CMake code to check for this condition. 
+    - HDF does not support building SHARED Fortran libraries on OSX. Added
+      CMake code to check for this condition.
       Fixes HDFFV-8227 (ADB 2013/03/04)
-    - CMake builds on Windows will no longer use legacy naming for libraries. 
+    - CMake builds on Windows will no longer use legacy naming for libraries.
       The "dll" tag will no longer be added to the name of *.lib and *.dll.
       The option HDF_LEGACY_NAMING is now OFF by default.
       Fixes HDFFV-8292 (ADB 2013/01/30)
 
     Library
     -------
-    - The library now behaves correctly when performing large I/O operations 
-      on Mac OS-X.  Previously, single I/O operations > 2 GB would fail 
-      since the Darwin read/write calls cannot handle the number of bytes 
+    - The library now behaves correctly when performing large I/O operations
+      on Mac OS-X.  Previously, single I/O operations > 2 GB would fail
+      since the Darwin read/write calls cannot handle the number of bytes
       that their parameter types imply.
       Fixes HDFFV-7975 and HDFFV-8240 (DER 2013/01/07)
-    - Fixed a bug in the core VFD that causes failures when opening files 
+    - Fixed a bug in the core VFD that causes failures when opening files
       > 2 GB.
       Fixes HDFFV-8124 and HDFFV-8158 (DER 2013/01/07)
     - Fixed a bug where unintialized memory was read during variable-length
@@ -4656,9 +4656,9 @@ Bug Fixes since HDF5-1.8.10
       (DER 2013/03/30)
     - Removed the H5Pset/get_dxpl_multi functions from the library.  The
       intended functionality for them was never fully implemented, and they
-      have always been fundamentally broken.  NOTE: This does not affect 
-      setting the multi VFD or any expected VFD functionality.  Multi VFD 
-      usage remains unchanged.  
+      have always been fundamentally broken.  NOTE: This does not affect
+      setting the multi VFD or any expected VFD functionality.  Multi VFD
+      usage remains unchanged.
       Fixes HDFFV-8296.  (DER 2013/03/30)
 
     Parallel Library
@@ -4679,15 +4679,15 @@ Bug Fixes since HDF5-1.8.10
 	includedir   header files, default is <prefix/include>.
       This allows users to just change the first line of prefix=<...> and the
       effect will change libdir and includedir too.  (AKC 2013/04/05 HDFFV-8358)
-    - h5repack: Fixed failure to convert the layout of a small chunked 
+    - h5repack: Fixed failure to convert the layout of a small chunked
       dataset (size < 1K) to contiguous layout.  HDFFV-8214 (JKM 2013/03/26)
-    - h5dump: Fixed displaying compression ratio for unknown or user-defined 
+    - h5dump: Fixed displaying compression ratio for unknown or user-defined
       filters. HDFFV-8344 (XCAO 2013/03/19)
-    - h5dump: Changed UNKNOWN_FILTER to USER_DEFINED_FILTER for user defined 
+    - h5dump: Changed UNKNOWN_FILTER to USER_DEFINED_FILTER for user defined
       filter. HDFFV-8346 (XCAO 2013/03/19)
-    - h5diff: Fixed to return the correct exit code 1 when the program 
-      detects a unique extra attribute. Prior to this fix, h5diff returned 
-      exit code 0 indicating the two files are identical.   
+    - h5diff: Fixed to return the correct exit code 1 when the program
+      detects a unique extra attribute. Prior to this fix, h5diff returned
+      exit code 0 indicating the two files are identical.
       HDFFV-7643 (JKM 2013/02/15)
     - h5dump: Fixed writing nulls to a binary file when exporting a dataset
       with compound string datatype. HDFFV-8169 (ADB 2013/1/31)
@@ -4695,10 +4695,10 @@ Bug Fixes since HDF5-1.8.10
       other machines that display extra output if an MPI task returns with a
       non-zero code.)
         Testing h5stat notexist.h5
-      The test script was fixed to ignore the extra output.  HDFFV-8233 
+      The test script was fixed to ignore the extra output.  HDFFV-8233
       (AKC - 2012/11/30)
     - h5diff: Improved speed when comparing HDF5 files with lots of
-      attributes. Much slower performance was identified with release versions 
+      attributes. Much slower performance was identified with release versions
       from 1.8.7 to 1.8.10 compared to 1.8.6. (JKM 2012/10/19)
 
     F90 API
@@ -4706,28 +4706,28 @@ Bug Fixes since HDF5-1.8.10
     - The integer type of the 'offset' argument in h5pset_external_f and
       h5pget_external_f was changed to INTEGER(KIND=OFF_T) to support 8-byte
       integers, matching the C type definition of off_t. (MSB - 2013/3/23)
-    - h5fc updated to recognize .f95, .f03 and .f08 file extensions. 
+    - h5fc updated to recognize .f95, .f03 and .f08 file extensions.
 
     C++ API
     ------
-    - The C++ wrappers DSetMemXferPropList::setMulti/getMulti were removed 
-      because the C functions H5Pset/get_dxpl_multi functions are removed 
+    - The C++ wrappers DSetMemXferPropList::setMulti/getMulti were removed
+      because the C functions H5Pset/get_dxpl_multi functions are removed
       from the library. Fixes HDFFV-8296 by DER.  (BMR 2013/03/30)
     - An exception thrown by an internal function was not propagating to the
       test program during stack unwinding, so it couldn't be caught by the
-      test, and the program terminated "without an active exception."  It 
-      seemed that the problem happened when c_str() was used to generate 
-      an equivalent const char* from a std::string and the resulting string 
-      was passed to the internal function.  As a work-around, we added a 
-      try/catch around the the call to the internal function and when the 
-      exception is caught there, it is re-thrown.  Fixes HDFFV-8067.  
+      test, and the program terminated "without an active exception."  It
+      seemed that the problem happened when c_str() was used to generate
+      an equivalent const char* from a std::string and the resulting string
+      was passed to the internal function.  As a work-around, we added a
+      try/catch around the the call to the internal function and when the
+      exception is caught there, it is re-thrown.  Fixes HDFFV-8067.
       (BMR 2013/03/30)
 
     High-Level APIs:
     ------
-    - Fixed a problem with H5DSget_scale_name including the NULL terminator 
-      in the size calculation returned by the function. The API was changed 
-      to NOT include the NULL terminator in the size of name returned 
+    - Fixed a problem with H5DSget_scale_name including the NULL terminator
+      in the size calculation returned by the function. The API was changed
+      to NOT include the NULL terminator in the size of name returned
       (MSB- 2013/2/10)
 
     Fortran High-Level APIs:
@@ -4773,12 +4773,12 @@ They are built with the configure process unless specified otherwise.
     #1 SMP x86_64 GNU/Linux       compilers for 64-bit applications;
     (koala)                           Version 4.1.2 20080704 (Red Hat 4.1.2-52)
                                       Version 4.6.3
-                                  PGI C, Fortran, C++ for 64-bit target on 
+                                  PGI C, Fortran, C++ for 64-bit target on
                                   x86-64;
-                                      Version 11.9-0 
+                                      Version 11.9-0
                                       Version 12.5-0
-                                  Intel(R) C, C++, Fortran Compilers for 
-                                  applications running on Intel(R) 64; 
+                                  Intel(R) C, C++, Fortran Compilers for
+                                  applications running on Intel(R) 64;
                                       Version 12.1 (Build 20110811)
                                       Version 12.1 (Build 20120212)
 
@@ -4830,14 +4830,14 @@ Tested Configuration Features Summary
 =====================================
 
     In the tables below
-          y   = tested 
+          y   = tested
           n   = not tested in this release
           C   = Cluster
           W   = Workstation
           x   = not working in this release
           dna = does not apply
           ( ) = footnote appears below second table
-          <blank> = testing incomplete on this feature or platform 
+          <blank> = testing incomplete on this feature or platform
 
 Platform                              C         F90/   F90      C++  zlib  SZIP
                                       parallel  F2003  parallel
@@ -4862,27 +4862,27 @@ CentOS 6.4 Linux 2.6.32 x86_64 Intel    n        y/y    n        y    y     y
 Linux 2.6.32-358.2.1.el6.ppc64          n        y/n    n        y    y     y
 
 
-Platform                                 Shared  Shared    Shared    Thread-  
-                                         C libs  F90 libs  C++ libs  safe     
-Solaris2.11 32-bit                         y       y         y         y        
-Solaris2.11 64-bit                         y       y         y         y        
+Platform                                 Shared  Shared    Shared    Thread-
+                                         C libs  F90 libs  C++ libs  safe
+Solaris2.11 32-bit                         y       y         y         y
+Solaris2.11 64-bit                         y       y         y         y
 Windows 7                                  y       y         y         y
 Windows 7 x64                              y       y         y         y
 Windows 7 Cygwin                           n       n         n         y
 Windows 7 x64 Cygwin                       n       n         n         y
-Mac OS X Snow Leopard 10.6.8 64-bit        y       n         y         n        
-Mac OS X Lion 10.7.3 64-bit                y       n         y         y        
-Mac OS X Mountain Lion 10.8.1 64-bit       y       n         y         y        
-AIX 5.3 32- and 64-bit                     y       n         n         y        
-CentOS 5.9 Linux 2.6.18-308 i686 GNU       y       y         y         y        
-CentOS 5.9 Linux 2.6.18-308 i686 Intel     y       y         y         n        
-CentOS 5.9 Linux 2.6.18-308 i686 PGI       y       y         y         n        
-CentOS 5.9 Linux 2.6.18 x86_64 GNU         y       y         y         y        
-CentOS 5.9 Linux 2.6.18 x86_64 Intel       y       y         y         n        
-CentOS 5.9 Linux 2.6.18 x86_64 PGI         y       y         y         n     
+Mac OS X Snow Leopard 10.6.8 64-bit        y       n         y         n
+Mac OS X Lion 10.7.3 64-bit                y       n         y         y
+Mac OS X Mountain Lion 10.8.1 64-bit       y       n         y         y
+AIX 5.3 32- and 64-bit                     y       n         n         y
+CentOS 5.9 Linux 2.6.18-308 i686 GNU       y       y         y         y
+CentOS 5.9 Linux 2.6.18-308 i686 Intel     y       y         y         n
+CentOS 5.9 Linux 2.6.18-308 i686 PGI       y       y         y         n
+CentOS 5.9 Linux 2.6.18 x86_64 GNU         y       y         y         y
+CentOS 5.9 Linux 2.6.18 x86_64 Intel       y       y         y         n
+CentOS 5.9 Linux 2.6.18 x86_64 PGI         y       y         y         n
 CentOS 6.4 Linux 2.6.32 x86_64 GNU         y       y         y         n
 CentOS 6.4 Linux 2.6.32 x86_64 Intel       y       y         y         n
-Linux 2.6.32-358.2.1.el6.ppc64             y       y         y         n 
+Linux 2.6.32-358.2.1.el6.ppc64             y       y         y         n
 
 Compiler versions for each platform are listed in the preceding
 "Supported Platforms" table.
@@ -4899,7 +4899,7 @@ The following platforms are not supported but have been tested for this release.
     Linux 2.6.18-308.16.1.el5     MPICH mpich2-1.4.1p1 compiled with
     #1 SMP x86_64 GNU/Linux           gcc 4.1.2 and gfortran 4.1.2
     (koala)                       g95 (GCC 4.0.3 (g95 0.94!)
-                                  
+
     FreeBSD 8.2-STABLE i386       gcc 4.2.1 [FreeBSD] 20070719
     (loyalty)                     gcc 4.6.1 20110422
                                   g++ 4.6.1 20110422
@@ -4922,14 +4922,14 @@ The following platforms are not supported but have been tested for this release.
 
     SUSE 12.3 3.7.10-1.1-desktop #1 SMP PREEMPT x86_64 x86_64 x86_64 GNU/Linux
                                   gcc (SUSE Linux) 4.7.2
-                                  GNU Fortran (SUSE Linux) 4.7.2 
+                                  GNU Fortran (SUSE Linux) 4.7.2
                                   (cmake and autotools)
 
     Ubuntu 12.10 3.5.0-25-generic #39-Ubuntu SMP x86_64 GNU/Linux
                                   gcc (Ubuntu/Linaro 4.7.2-2ubuntu1) 4.7.2
                                   GNU Fortran (Ubuntu/Linaro 4.7.2-2ubuntu1) 4.7.2
                                   (cmake and autotools)
-    
+
     Cray Linux Environment (CLE)  PrgEnv-pgi/4.0.46
     hopper.nersc.gov              pgcc 12.5-0 64-bit target on x86-64 Linux -tp shanghai
                                   pgf90 12.5-0 64-bit target on x86-64 Linux -tp shanghai
@@ -4954,15 +4954,15 @@ Known Problems
   spurious data values has only been encountered on Windows 32-bit systems.
   (Issue HDFFV-8247; JP - 2013/03/27)
 
-* The 5.9 C++ compiler on Sun failed to compile a C++ test ttypes.cpp.  It 
+* The 5.9 C++ compiler on Sun failed to compile a C++ test ttypes.cpp.  It
   complains with this message:
       "/home/hdf5/src/H5Vprivate.h", line 130: Error: __func__ is not defined.
-  
+
   The reason is that __func__ is a predefined identifier in C99 standard.  The
-  HDF5 C library uses it in H5private.h.  The test ttypes.cpp includes 
+  HDF5 C library uses it in H5private.h.  The test ttypes.cpp includes
   H5private.h (H5Tpkg.h<-H5Fprivate.h<-H5Vprivate.h<-H5private.h).  Sun's 5.9
   C++ compiler doesn't support __func__, thus fails to compile the C++ test.
-  But Sun's 5.11 C++ compiler does.  To check whether your Sun C++ compiler 
+  But Sun's 5.11 C++ compiler does.  To check whether your Sun C++ compiler
   knows this identifier, try to compile the following simple C++ program:
       #include<stdio.h>
 
@@ -4983,7 +4983,7 @@ Known Problems
 
    h5dump --no-compact-subset -d "AHFINDERDIRECT::ah_centroid_t[0] it=0 tl=0"
      tno-subset.h5
-  
+
   This is due to the embedded spaces in the dataset name being interpreted
   by the command script launcher as meta-characters, thus passing three
   arguments to h5dump's -d flag. The command passes if run by hand, just
@@ -4994,21 +4994,21 @@ Known Problems
   to aprun -np X, because the H5lib_settings.c file was not generated
   properly. Not setting those environment variables works, because
   configure was able to automatically detect that it's a Cray system
-  and used the proper launch commands when necessary. 
+  and used the proper launch commands when necessary.
   (MSC - 2012/04/18)
 
 * The data conversion test dt_arith.c fails in "long double" to integer
   conversion on Ubuntu 11.10 (3.0.0.13 kernel) with GCC 4.6.1 if the library
   is built with optimization -O3 or -O2.  The older GCC (4.5) or newer kernal
-  (3.2.2 on Fedora) doesn't have the problem.  Users should lower the 
-  optimization level (-O1 or -O0) by defining CFLAGS in the command line of 
+  (3.2.2 on Fedora) doesn't have the problem.  Users should lower the
+  optimization level (-O1 or -O0) by defining CFLAGS in the command line of
   "configure" like:
 
       CFLAGS=-O1 ./configure
 
   This will overwrite the library's default optimization level.
   (SLU - 2012/02/07 - HDFFV-7829)
-  This issue is no longer present on Ubuntu 12.10 (3.5.0 kernel) with 
+  This issue is no longer present on Ubuntu 12.10 (3.5.0 kernel) with
   gcc 4.7.2.
 
 * The STDIO VFD does not work on some architectures, possibly due to 32/64
@@ -5031,7 +5031,7 @@ Known Problems
   that "make prefix=XXX install" no longer works for shared libraries. It
   still works correctly for static libraries. Therefore, if you want to
   install the HDF5 shared libraries in a location such as /usr/local/hdf5,
-  you need to specify the location via the --prefix option during configure 
+  you need to specify the location via the --prefix option during configure
   time. E.g, ./configure --prefix=/usr/local/hdf5 ...
   (AKC - 2011/05/07 - HDFFV-7583)
 
@@ -5039,8 +5039,8 @@ Known Problems
   be terminated by the alarm signal.  If that happens, one can increase the
   alarm seconds (default is 1200 seconds = 20 minutes) by setting the
   environment variable, $HDF5_ALARM_SECONDS, to a larger value such as 3600
-  (60 minutes).  Note that the t_shapesame test may fail in some systems 
-  (see the "While working on the 1.8.6 release..." problem below).  If 
+  (60 minutes).  Note that the t_shapesame test may fail in some systems
+  (see the "While working on the 1.8.6 release..." problem below).  If
   it does, it will waste more time if $HDF5_ALARM_SECONDS is set
   to a larger value.
   (AKC - 2011/05/07)
@@ -5071,7 +5071,7 @@ Known Problems
   (NAF - 2011/01/19)
 
 * The library's test dt_arith.c showed a compiler's rounding problem on
-  Cygwin when converting from unsigned long long to long double.  The 
+  Cygwin when converting from unsigned long long to long double.  The
   library's own conversion works fine.  We defined a macro for Cygwin to
   skip this test until we can solve the problem.
   (SLU - 2010/05/05 - HDFFV-1264)
@@ -5081,42 +5081,42 @@ Known Problems
   get_eoa and set_eoa callback functions.  A new callback function
   get_type_map was added in.  The public function H5FDrealloc was taken
   out in 1.8.  The problem only happens when users define their own driver
-  for 1.6 and try to plug in 1.8 library.  Because there's only one user 
-  complaining about it, we (Elena, Quincey, and I) decided to leave it as 
+  for 1.6 and try to plug in 1.8 library.  Because there's only one user
+  complaining about it, we (Elena, Quincey, and I) decided to leave it as
   it is (see bug report #1279).  Quincey will make a plan for 1.10.
   (SLU - 2010/02/02)
 
 * The --enable-static-exec configure flag will only statically link libraries
   if the static version of that library is present. If only the shared version
   of a library exists (i.e., most system libraries on Solaris, AIX, and Mac,
-  for example, only have shared versions), the flag should still result in a 
-  successful compilation, but note that the installed executables will not be 
-  fully static. Thus, the only guarantee on these systems is that the 
+  for example, only have shared versions), the flag should still result in a
+  successful compilation, but note that the installed executables will not be
+  fully static. Thus, the only guarantee on these systems is that the
   executable is statically linked with just the HDF5 library.
   (MAM - 2009/11/04)
-  
+
 * Parallel tests failed with 16 processes with data inconsistency at testphdf5
   / dataset_readAll. Parallel tests also failed with 32 and 64 processes with
   collective abort of all ranks at t_posix_compliant / allwrite_allread_blocks
   with MPI IO.
   (CMC - 2009/04/28)
 
-* On an Intel 64 Linux cluster (RH 4, Linux 2.6.9) with Intel 10.0 compilers, 
-  use -mp -O1 compilation flags to build the libraries. A higher level of 
-  optimization causes failures in several HDF5 library tests. 
+* On an Intel 64 Linux cluster (RH 4, Linux 2.6.9) with Intel 10.0 compilers,
+  use -mp -O1 compilation flags to build the libraries. A higher level of
+  optimization causes failures in several HDF5 library tests.
 
-* A dataset created or rewritten with a v1.6.3 library or after cannot be read 
+* A dataset created or rewritten with a v1.6.3 library or after cannot be read
   with the v1.6.2 library or before when the Fletcher32 EDC filter is enabled.
-  There was a bug in the calculation of the Fletcher32 checksum in the 
+  There was a bug in the calculation of the Fletcher32 checksum in the
   library before v1.6.3; the checksum value was not consistent between big-
-  endian and little-endian systems.  This bug was fixed in Release 1.6.3.  
-  However, after fixing the bug, the checksum value was no longer the same as 
-  before on little-endian system.  Library releases after 1.6.4 can still read 
-  datasets created or rewritten with an HDF5 library of v1.6.2 or before.  
+  endian and little-endian systems.  This bug was fixed in Release 1.6.3.
+  However, after fixing the bug, the checksum value was no longer the same as
+  before on little-endian system.  Library releases after 1.6.4 can still read
+  datasets created or rewritten with an HDF5 library of v1.6.2 or before.
   (SLU - 2005/06/30)
 
 
-%%%%1.8.10-patch1%%%%   
+%%%%1.8.10-patch1%%%%
 
 
 HDF5 version 1.8.10-patch1 released on 2013-01-22
@@ -5125,10 +5125,10 @@ HDF5 version 1.8.10-patch1 released on 2013-01-22
 INTRODUCTION
 ============
 
-This document describes the differences between HDF5-1.8.9 and 
-HDF5 1.8.10, and contains information on the platforms tested and 
-known problems in HDF5-1.8.10. 
-For more details, see the files HISTORY-1_0-1_8_0_rc3.txt 
+This document describes the differences between HDF5-1.8.9 and
+HDF5 1.8.10, and contains information on the platforms tested and
+known problems in HDF5-1.8.10.
+For more details, see the files HISTORY-1_0-1_8_0_rc3.txt
 and HISTORY-1_8.txt in the release_docs/ directory of the HDF5 source.
 
 Links to the HDF5 1.8.10 source code, documentation, and additional materials
@@ -5140,18 +5140,18 @@ The HDF5 1.8.10 release can be obtained from:
 
      http://www.hdfgroup.org/HDF5/release/obtain5.html
 
-User documentation for 1.8.10 can be accessed directly at this location: 
+User documentation for 1.8.10 can be accessed directly at this location:
 
      http://www.hdfgroup.org/HDF5/doc/
 
-New features in the HDF5-1.8.x release series, including brief general 
-descriptions of some new and modified APIs, are described in the "What's New 
+New features in the HDF5-1.8.x release series, including brief general
+descriptions of some new and modified APIs, are described in the "What's New
 in 1.8.0?" document:
 
      http://www.hdfgroup.org/HDF5/doc/ADGuide/WhatsNew180.html
 
-All new and modified APIs are listed in detail in the "HDF5 Software Changes 
-from Release to Release" document, in the section "Release 1.8.10 (current 
+All new and modified APIs are listed in detail in the "HDF5 Software Changes
+from Release to Release" document, in the section "Release 1.8.10 (current
 release) versus Release 1.8.9":
 
      http://www.hdfgroup.org/HDF5/doc/ADGuide/Changes.html
@@ -5194,25 +5194,25 @@ New Features
       size.  Now the library picks the smaller one between the dataset size
       and the sieve buffer size from the file access property. See Issue 7934.
       (SLU - 2012/4/11)
- 
+
     Parallel Library
     ----------------
-    - Added the H5Pget_mpio_no_collective_cause() function that retrieves 
-      reasons why the collective I/O was broken during read/write IO access. 
+    - Added the H5Pget_mpio_no_collective_cause() function that retrieves
+      reasons why the collective I/O was broken during read/write IO access.
       (JKM - 2012/08/30 HDFFV-8143)
 
     - Added H5Pget_mpio_actual_io_mode_f (MSB - 2012/09/27)
- 
+
     Tools
     -----
-    - h5import: Changed to allow the use of h5dump output as input files to 
-      h5import. h5dump must include the "-p" option to print the properties; 
-      configuration file is captured output of h5dump. The restrictions are 
-      that only one dataset with a simple datatype (integer, floating-point, 
-      or string) can be processed. Integers and floating-point imports from 
-      h5dump must use the "binary" option for the data file. The string version 
-      uses the h5dump "-y --width=1" options to disable the indexing printouts, 
-      print single columns, and obviously NOT use the "binary" option. 
+    - h5import: Changed to allow the use of h5dump output as input files to
+      h5import. h5dump must include the "-p" option to print the properties;
+      configuration file is captured output of h5dump. The restrictions are
+      that only one dataset with a simple datatype (integer, floating-point,
+      or string) can be processed. Integers and floating-point imports from
+      h5dump must use the "binary" option for the data file. The string version
+      uses the h5dump "-y --width=1" options to disable the indexing printouts,
+      print single columns, and obviously NOT use the "binary" option.
       (ADB - 2012/07/19 HDFFV-721)
 
     High-Level APIs
@@ -5221,7 +5221,7 @@ New Features
 
     Fortran API
     -----------
-    - Fixed a typo in return value of the nh5dread_f_c function (was 1 
+    - Fixed a typo in return value of the nh5dread_f_c function (was 1
       instead of 0 on success); fixed the return value to make it consistent
       with other Fortran functions; cleaned debug statements from the code.
       (EIP - 2012/06/23)
@@ -5255,9 +5255,9 @@ Bug Fixes since HDF5-1.8.10
         Testing h5stat notexist.h5
       The test script was fixed to ignore the extra output.
       HDFFV-8233 (AKC - 2012/12/17)
-    - h5diff: Fixed slowness when comparing HDF5 files with many attributes. 
-      Much slower performance was identified with later release version 
-      (from 1.8.7 to 1.8.10) compared to 1.8.6. The issue was introduced 
+    - h5diff: Fixed slowness when comparing HDF5 files with many attributes.
+      Much slower performance was identified with later release version
+      (from 1.8.7 to 1.8.10) compared to 1.8.6. The issue was introduced
       from fixing an attribute related bug for 1.8.7 release in the past.
       HDFFV-8145 (JKM 2012/12/13)
 
@@ -5276,7 +5276,7 @@ Bug Fixes since HDF5-1.8.9
       the hard conversion code in test/dt_arith.c to fail. HDFFV-8017.
       (AKC - 2012/10/10)
     - Fixed AIX Fortran compiler flags to use appropriate settings for
-      debugging, profiling, and optimization situations. HDFFV-8069. 
+      debugging, profiling, and optimization situations. HDFFV-8069.
       (AKC 2012/09/27)
 
     Library
@@ -5287,7 +5287,7 @@ Bug Fixes since HDF5-1.8.9
       the core VFD" sub-test if the source directory is read-only as the test
       fails to create its test files in the build directory. This has been
       fixed. HDFFV-8009 (AKC - 2012/07/06)
-  
+
 
     Parallel Library
     ----------------
@@ -5306,27 +5306,27 @@ Bug Fixes since HDF5-1.8.9
     Tools
     -----
     - h5repack: "h5repack -f NONE file1.h5 out.h5" command failed if
-      source file contains chunked dataset and a chunk dim is bigger than 
+      source file contains chunked dataset and a chunk dim is bigger than
       the dataset dim. Another issue is that the command changed max dims
-      if chunk dim is smaller than the dataset dim. These issue occurred 
+      if chunk dim is smaller than the dataset dim. These issue occurred
       when dataset size is smaller than 64k (compact size limit)  Fixed both.
       HDFFV-8012 (JKM 2012/09/24)
-    - h5diff: Fixed the counter in verbose mode (-v, -r) so that it will no 
-      longer add together the differences between datasets and the differences 
-      between attributes of those datasets. This change makes the output of 
-      verbose mode consistent for datasets, groups, and committed datatypes. 
+    - h5diff: Fixed the counter in verbose mode (-v, -r) so that it will no
+      longer add together the differences between datasets and the differences
+      between attributes of those datasets. This change makes the output of
+      verbose mode consistent for datasets, groups, and committed datatypes.
       HDFFV-5919 (JKM 2012/09/10)
-    - h5diff: Fixed the incorrect result when comparing attribute data 
+    - h5diff: Fixed the incorrect result when comparing attribute data
       values and the data type has the same class but different sizes.
       HDFFV-7942  (JKM 2012/08/15)
     - h5dump: Replaced single element fwrite with block writes.
       HDFFV-1208 (ADB 2012/08/13)
-    - h5diff: Fixed test failure for "make check" due to failure of 
+    - h5diff: Fixed test failure for "make check" due to failure of
       copying test files when performed in HDF5 source tree. Also applied
       to other tools.  HDFFV-8107 (JKM 2012/08/01)
-    - ph5diff: Fixed intermittent hang issue on a certain operation in 
-      parallel mode. It was detected by daily test for comparing 
-      non-comparable objects, but it could have occurred in other 
+    - ph5diff: Fixed intermittent hang issue on a certain operation in
+      parallel mode. It was detected by daily test for comparing
+      non-comparable objects, but it could have occurred in other
       operations depending on machine condition.  HDFFV-8003 (JKM 2012/08/01)
     - h5diff: Fixed the function COPY_TESTFILES_TO_TESTDIR() of testh5diff.sh
       to better report when there is an error in the file copying.
@@ -5334,22 +5334,22 @@ Bug Fixes since HDF5-1.8.9
     - h5dump: Fixed the sort by name display to maintain correct parent/child
       relationships between ascending/descending order.
       HDFFV-8095 (ADB 2012/07/12)
-    - h5dump: Fixed the display by creation order when using option -n 
+    - h5dump: Fixed the display by creation order when using option -n
       (print contents).
       HDFFV-5942 (ADB 2012/07/09)
-    - h5dump: Changed to allow H5T_CSET_UTF8 to be displayed in h5dump output. 
-      Used technique similar to what was done in h5ls (matches library 
+    - h5dump: Changed to allow H5T_CSET_UTF8 to be displayed in h5dump output.
+      Used technique similar to what was done in h5ls (matches library
       options).
       HDFFV-7999 (ADB 2012/05/23)
-    - h5diff: Fixed the tool so that it will not check and display the status 
-      of dangling links without setting the --follow-symlinks option. This 
-      also improved performance when comparing lots of external links without 
-      the --follow-symlinks option.  
+    - h5diff: Fixed the tool so that it will not check and display the status
+      of dangling links without setting the --follow-symlinks option. This
+      also improved performance when comparing lots of external links without
+      the --follow-symlinks option.
       HDFFV-7998 (JKM 2012/04/26)
 
     F90 API
     -------
-    
+
     - Fixed a typo in return value of the nh5dread_f_c function (was 1
       instead of 0 on success); fixed the return value to make it consistent
       with other Fortran functions; cleaned debug statements from the code.
@@ -5372,15 +5372,15 @@ Bug Fixes since HDF5-1.8.9
     High-Level APIs:
     ------
 
-    - Fixed problem with H5TBdelete_record destroying all data following the 
+    - Fixed problem with H5TBdelete_record destroying all data following the
       deletion of a row. (MSB- 2012/7/26)
 
-    - Fixed H5LTget_attribute_string not closing an object identifier when an 
+    - Fixed H5LTget_attribute_string not closing an object identifier when an
       error occurs. (MSB- 2012/7/21)
 
-    - Corrected the return type of H5TBAget_fill from herr_t to htri_t to 
-      reflect that a return value of 1 indicates that a fill value is 
-      present, 0 indicates a fill value is not present, and <0 indicates an 
+    - Corrected the return type of H5TBAget_fill from herr_t to htri_t to
+      reflect that a return value of 1 indicates that a fill value is
+      present, 0 indicates a fill value is not present, and <0 indicates an
       error.
 
     Fortran High-Level APIs:
@@ -5410,19 +5410,19 @@ Supported Platforms
     #1 SMP x86_64 GNU/Linux       compilers for 32-bit applications;
     (koala)                           Version 4.1.2 20080704 (Red Hat 4.1.2-52)
                                       Version 4.6.3
-                                  PGI C, Fortran, C++ for 64-bit target on 
+                                  PGI C, Fortran, C++ for 64-bit target on
                                   x86-64;
-                                      Version 11.9-0 
+                                      Version 11.9-0
                                       Version 12.5-0
-                                  Intel(R) C, C++, Fortran Compilers for 
-                                  applications running on Intel(R) 64; 
+                                  Intel(R) C, C++, Fortran Compilers for
+                                  applications running on Intel(R) 64;
                                       Version 12.1 (Build 20110811)
                                       Version 12.1 (Build 20120212)
                                   MPICH mpich2-1.4.1p1 compiled with
                                       gcc 4.1.2 and gfortran 4.1.2
 
-    Linux 2.6.32-220.7.1.el6.ppc64 gcc (GCC) 4.4.6 20110731 (Red Hat 4.4.6-3) 
-    #1 SMP ppc64 GNU/Linux        g++ (GCC) 4.4.6 20110731 
+    Linux 2.6.32-220.7.1.el6.ppc64 gcc (GCC) 4.4.6 20110731 (Red Hat 4.4.6-3)
+    #1 SMP ppc64 GNU/Linux        g++ (GCC) 4.4.6 20110731
     (ostrich)                     GNU Fortran (GCC) 4.4.6 20110731 (Red Hat 4.4.6-3)
 
     Linux 2.6.32-220.23.1.1chaos  Intel C, C++, Fortran Compilers
@@ -5481,14 +5481,14 @@ Tested Configuration Features Summary
 =====================================
 
     In the tables below
-          y   = tested 
+          y   = tested
           n   = not tested in this release
           C   = Cluster
           W   = Workstation
           x   = not working in this release
           dna = does not apply
           ( ) = footnote appears below second table
-          <blank> = testing incomplete on this feature or platform 
+          <blank> = testing incomplete on this feature or platform
 
 Platform                              C         F90/   F90      C++  zlib  SZIP
                                       parallel  F2003  parallel
@@ -5496,7 +5496,7 @@ Solaris2.10 32-bit                      n        y/y    n        y    y     y
 Solaris2.10 64-bit                      n        y/n    n        y    y     y
 Windows 7                               y        y/n    n        y    y     y
 Windows 7     x64                       y        y/n    n        y    y     y
-Mac OS X Snow Leopard 10.6.8 32-bit     n        y/y    n        y    y     n 
+Mac OS X Snow Leopard 10.6.8 32-bit     n        y/y    n        y    y     n
 Mac OS X Snow Leopard 10.6.8 64-bit     n        y/y    n        y    y     y
 Mac OS X Lion 10.7.3 32-bit             n        y/y    n        y    y     n
 Mac OS X Lion 10.7.3 64-bit             n        y/y    n        y    y     y
@@ -5511,25 +5511,25 @@ CentOS 5.5 Linux 2.6.18 x86_64 PGI      n        y/y    n        y    y     y
 Linux 2.6.32-220.7.1.el6.ppc64          n        y/n    n        y    y     y
 
 
-Platform                                 Shared  Shared    Shared    Thread-  
-                                         C libs  F90 libs  C++ libs  safe     
-Solaris2.10 32-bit                         y       y         y         y        
-Solaris2.10 64-bit                         n       n         n         n        
+Platform                                 Shared  Shared    Shared    Thread-
+                                         C libs  F90 libs  C++ libs  safe
+Solaris2.10 32-bit                         y       y         y         y
+Solaris2.10 64-bit                         n       n         n         n
 Windows 7                                  y       y         y         y
 Windows 7 x64                              y       y         y         y
-Mac OS X Snow Leopard 10.6.8 32-bit        y       n         y         n        
-Mac OS X Snow Leopard 10.6.8 64-bit        y       n         y         n        
-Mac OS X Lion 10.7.3 32-bit                y       n         y         y        
-Mac OS X Lion 10.7.3 64-bit                y       n         y         y        
-Mac OS X Mountain Lion 10.8.1 64-bit       y       n         y         y        
-AIX 5.3 32- and 64-bit                     n       n         n         y        
-CentOS 5.5 Linux 2.6.18-308 i686 GNU       y       y         y         y        
-CentOS 5.5 Linux 2.6.18-308 i686 Intel     y       y         y         n        
-CentOS 5.5 Linux 2.6.18-308 i686 PGI       y       y         y         n        
-CentOS 5.5 Linux 2.6.18 x86_64 GNU         y       y         y         y        
-CentOS 5.5 Linux 2.6.18 x86_64 Intel       y       y         y         n        
-CentOS 5.5 Linux 2.6.18 x86_64 PGI         y       y         y         n        
-Linux 2.6.32-220.7.1.el6.ppc64             y       y         y         n 
+Mac OS X Snow Leopard 10.6.8 32-bit        y       n         y         n
+Mac OS X Snow Leopard 10.6.8 64-bit        y       n         y         n
+Mac OS X Lion 10.7.3 32-bit                y       n         y         y
+Mac OS X Lion 10.7.3 64-bit                y       n         y         y
+Mac OS X Mountain Lion 10.8.1 64-bit       y       n         y         y
+AIX 5.3 32- and 64-bit                     n       n         n         y
+CentOS 5.5 Linux 2.6.18-308 i686 GNU       y       y         y         y
+CentOS 5.5 Linux 2.6.18-308 i686 Intel     y       y         y         n
+CentOS 5.5 Linux 2.6.18-308 i686 PGI       y       y         y         n
+CentOS 5.5 Linux 2.6.18 x86_64 GNU         y       y         y         y
+CentOS 5.5 Linux 2.6.18 x86_64 Intel       y       y         y         n
+CentOS 5.5 Linux 2.6.18 x86_64 PGI         y       y         y         n
+Linux 2.6.32-220.7.1.el6.ppc64             y       y         y         n
 
 Compiler versions for each platform are listed in the preceding
 "Supported Platforms" table.
@@ -5576,7 +5576,7 @@ The following platforms are not supported but have been tested for this release.
 
     SUSE 12.2 3.4.6-2.10-desktop #1 SMP PREEMPT x86_64 x86_64 x86_64 GNU/Linux
                                   gcc (SUSE Linux) 4.7.1
-                                  GNU Fortran (SUSE Linux) 4.7.1 
+                                  GNU Fortran (SUSE Linux) 4.7.1
                                   (cmake and autotools)
 
     Ubuntu 12.04 3.2.0-29-generic #46-Ubuntu SMP i686 GNU/Linux
@@ -5589,12 +5589,12 @@ The following platforms are not supported but have been tested for this release.
                                   GNU Fortran (Ubuntu/Linaro 4.6.3-1ubuntu5) 4.6.3
                                   (cmake and autotools)
                                   (Use optimization level -O1)
-    
+
     Cray Linux Environment (CLE)  PrgEnv-pgi/4.0.46
     hopper.nersc.gov              pgcc 12.5-0 64-bit target on x86-64 Linux -tp shanghai
                                   pgf90 12.5-0 64-bit target on x86-64 Linux -tp shanghai
                                   pgCC 12.5-0 64-bit target on x86-64 Linux -tp shanghai
-    
+
 
 Known Problems
 ==============
@@ -5608,7 +5608,7 @@ Known Problems
 
    h5dump --no-compact-subset -d "AHFINDERDIRECT::ah_centroid_t[0] it=0 tl=0"
      tno-subset.h5
-  
+
   This is due to the embedded spaces in the dataset name being interpreted
   by the command script launcher as meta-characters, thus passing three
   arguments to h5dump's -d flag. The command passes if run by hand, just
@@ -5619,14 +5619,14 @@ Known Problems
   to aprun -np X, because the H5lib_settings.c file was not generated
   properly. Not setting those environment variables works, because
   configure was able to automatically detect that it's a Cray system
-  and used the proper launch commands when necessary. 
+  and used the proper launch commands when necessary.
   (MSC - 2012/04/18)
 
 * The data conversion test dt_arith.c fails in "long double" to integer
   conversion on Ubuntu 11.10 (3.0.0.13 kernal) with GCC 4.6.1 if the library
   is built with optimization -O3 or -O2.  The older GCC (4.5) or newer kernal
-  (3.2.2 on Fedora) doesn't have the problem.  Users should lower the 
-  optimization level (-O1 or -O0) by defining CFLAGS in the command line of 
+  (3.2.2 on Fedora) doesn't have the problem.  Users should lower the
+  optimization level (-O1 or -O0) by defining CFLAGS in the command line of
   "configure" like:
 
       CFLAGS=-O1 ./configure
@@ -5654,7 +5654,7 @@ Known Problems
   that "make prefix=XXX install" no longer works for shared libraries. It
   still works correctly for static libraries. Therefore, if you want to
   install the HDF5 shared libraries in a location such as /usr/local/hdf5,
-  you need to specify the location via the --prefix option during configure 
+  you need to specify the location via the --prefix option during configure
   time. E.g, ./configure --prefix=/usr/local/hdf5 ...
   (AKC - 2011/05/07 - HDFFV-7583)
 
@@ -5662,8 +5662,8 @@ Known Problems
   be terminated by the alarm signal.  If that happens, one can increase the
   alarm seconds (default is 1200 seconds = 20 minutes) by setting the
   environment variable, $HDF5_ALARM_SECONDS, to a larger value such as 3600
-  (60 minutes).  Note that the t_shapesame test may fail in some systems 
-  (see the "While working on the 1.8.6 release..." problem below).  If 
+  (60 minutes).  Note that the t_shapesame test may fail in some systems
+  (see the "While working on the 1.8.6 release..." problem below).  If
   it does, it will waste more time if $HDF5_ALARM_SECONDS is set
   to a larger value.
   (AKC - 2011/05/07)
@@ -5694,7 +5694,7 @@ Known Problems
   (NAF - 2011/01/19)
 
 * The library's test dt_arith.c showed a compiler's rounding problem on
-  Cygwin when converting from unsigned long long to long double.  The 
+  Cygwin when converting from unsigned long long to long double.  The
   library's own conversion works fine.  We defined a macro for Cygwin to
   skip this test until we can solve the problem.
   (SLU - 2010/05/05 - HDFFV-1264)
@@ -5704,42 +5704,42 @@ Known Problems
   get_eoa and set_eoa callback functions.  A new callback function
   get_type_map was added in.  The public function H5FDrealloc was taken
   out in 1.8.  The problem only happens when users define their own driver
-  for 1.6 and try to plug in 1.8 library.  Because there's only one user 
-  complaining about it, we (Elena, Quincey, and I) decided to leave it as 
+  for 1.6 and try to plug in 1.8 library.  Because there's only one user
+  complaining about it, we (Elena, Quincey, and I) decided to leave it as
   it is (see bug report #1279).  Quincey will make a plan for 1.10.
   (SLU - 2010/02/02)
 
 * The --enable-static-exec configure flag will only statically link libraries
   if the static version of that library is present. If only the shared version
   of a library exists (i.e., most system libraries on Solaris, AIX, and Mac,
-  for example, only have shared versions), the flag should still result in a 
-  successful compilation, but note that the installed executables will not be 
-  fully static. Thus, the only guarantee on these systems is that the 
+  for example, only have shared versions), the flag should still result in a
+  successful compilation, but note that the installed executables will not be
+  fully static. Thus, the only guarantee on these systems is that the
   executable is statically linked with just the HDF5 library.
   (MAM - 2009/11/04)
-  
+
 * Parallel tests failed with 16 processes with data inconsistency at testphdf5
   / dataset_readAll. Parallel tests also failed with 32 and 64 processes with
   collective abort of all ranks at t_posix_compliant / allwrite_allread_blocks
   with MPI IO.
   (CMC - 2009/04/28)
 
-* On an Intel 64 Linux cluster (RH 4, Linux 2.6.9) with Intel 10.0 compilers, 
-  use -mp -O1 compilation flags to build the libraries. A higher level of 
-  optimization causes failures in several HDF5 library tests. 
+* On an Intel 64 Linux cluster (RH 4, Linux 2.6.9) with Intel 10.0 compilers,
+  use -mp -O1 compilation flags to build the libraries. A higher level of
+  optimization causes failures in several HDF5 library tests.
 
-* A dataset created or rewritten with a v1.6.3 library or after cannot be read 
+* A dataset created or rewritten with a v1.6.3 library or after cannot be read
   with the v1.6.2 library or before when the Fletcher32 EDC filter is enabled.
-  There was a bug in the calculation of the Fletcher32 checksum in the 
+  There was a bug in the calculation of the Fletcher32 checksum in the
   library before v1.6.3; the checksum value was not consistent between big-
-  endian and little-endian systems.  This bug was fixed in Release 1.6.3.  
-  However, after fixing the bug, the checksum value was no longer the same as 
-  before on little-endian system.  Library releases after 1.6.4 can still read 
-  datasets created or rewritten with an HDF5 library of v1.6.2 or before.  
+  endian and little-endian systems.  This bug was fixed in Release 1.6.3.
+  However, after fixing the bug, the checksum value was no longer the same as
+  before on little-endian system.  Library releases after 1.6.4 can still read
+  datasets created or rewritten with an HDF5 library of v1.6.2 or before.
   (SLU - 2005/06/30)
 
 
-%%%%1.8.10%%%%   
+%%%%1.8.10%%%%
 
 
 HDF5 version 1.8.10 released on 2012-10-26
@@ -5748,10 +5748,10 @@ HDF5 version 1.8.10 released on 2012-10-26
 INTRODUCTION
 ============
 
-This document describes the differences between HDF5-1.8.9 and 
-HDF5 1.8.10, and contains information on the platforms tested and 
-known problems in HDF5-1.8.10. 
-For more details, see the files HISTORY-1_0-1_8_0_rc3.txt 
+This document describes the differences between HDF5-1.8.9 and
+HDF5 1.8.10, and contains information on the platforms tested and
+known problems in HDF5-1.8.10.
+For more details, see the files HISTORY-1_0-1_8_0_rc3.txt
 and HISTORY-1_8.txt in the release_docs/ directory of the HDF5 source.
 
 Links to the HDF5 1.8.10 source code, documentation, and additional materials
@@ -5763,18 +5763,18 @@ The HDF5 1.8.10 release can be obtained from:
 
      http://www.hdfgroup.org/HDF5/release/obtain5.html
 
-User documentation for 1.8.10 can be accessed directly at this location: 
+User documentation for 1.8.10 can be accessed directly at this location:
 
      http://www.hdfgroup.org/HDF5/doc/
 
-New features in the HDF5-1.8.x release series, including brief general 
-descriptions of some new and modified APIs, are described in the "What's New 
+New features in the HDF5-1.8.x release series, including brief general
+descriptions of some new and modified APIs, are described in the "What's New
 in 1.8.0?" document:
 
      http://www.hdfgroup.org/HDF5/doc/ADGuide/WhatsNew180.html
 
-All new and modified APIs are listed in detail in the "HDF5 Software Changes 
-from Release to Release" document, in the section "Release 1.8.10 (current 
+All new and modified APIs are listed in detail in the "HDF5 Software Changes
+from Release to Release" document, in the section "Release 1.8.10 (current
 release) versus Release 1.8.9":
 
      http://www.hdfgroup.org/HDF5/doc/ADGuide/Changes.html
@@ -5802,7 +5802,7 @@ New Features
     Configuration
     -------------
     - None
-    
+
     Library
     -------
     - Updated to latest autotools and changed all hard *.sh scripts to
@@ -5814,25 +5814,25 @@ New Features
       size.  Now the library picks the smaller one between the dataset size
       and the sieve buffer size from the file access property. See Issue 7934.
       (SLU - 2012/4/11)
- 
+
     Parallel Library
     ----------------
-    - Added the H5Pget_mpio_no_collective_cause() function that retrieves 
-      reasons why the collective I/O was broken during read/write IO access. 
+    - Added the H5Pget_mpio_no_collective_cause() function that retrieves
+      reasons why the collective I/O was broken during read/write IO access.
       (JKM - 2012/08/30 HDFFV-8143)
 
     - Added H5Pget_mpio_actual_io_mode_f (MSB - 2012/09/27)
- 
+
     Tools
     -----
-    - h5import: Changed to allow the use of h5dump output as input files to 
-      h5import. h5dump must include the "-p" option to print the properties; 
-      configuration file is captured output of h5dump. The restrictions are 
-      that only one dataset with a simple datatype (integer, floating-point, 
-      or string) can be processed. Integers and floating-point imports from 
-      h5dump must use the "binary" option for the data file. The string version 
-      uses the h5dump "-y --width=1" options to disable the indexing printouts, 
-      print single columns, and obviously NOT use the "binary" option. 
+    - h5import: Changed to allow the use of h5dump output as input files to
+      h5import. h5dump must include the "-p" option to print the properties;
+      configuration file is captured output of h5dump. The restrictions are
+      that only one dataset with a simple datatype (integer, floating-point,
+      or string) can be processed. Integers and floating-point imports from
+      h5dump must use the "binary" option for the data file. The string version
+      uses the h5dump "-y --width=1" options to disable the indexing printouts,
+      print single columns, and obviously NOT use the "binary" option.
       (ADB - 2012/07/19 HDFFV-721)
 
     High-Level APIs
@@ -5841,7 +5841,7 @@ New Features
 
     Fortran API
     -----------
-    - Fixed a typo in return value of the nh5dread_f_c function (was 1 
+    - Fixed a typo in return value of the nh5dread_f_c function (was 1
       instead of 0 on success); fixed the return value to make it consistent
       with other Fortran functions; cleaned debug statements from the code.
       (EIP - 2012/06/23)
@@ -5866,7 +5866,7 @@ Bug Fixes since HDF5-1.8.9
       the hard conversion code in test/dt_arith.c to fail. HDFFV-8017.
       (AKC - 2012/10/10)
     - Fixed AIX Fortran compiler flags to use appropriate settings for
-      debugging, profiling, and optimization situations. HDFFV-8069. 
+      debugging, profiling, and optimization situations. HDFFV-8069.
       (AKC 2012/09/27)
 
     Library
@@ -5877,7 +5877,7 @@ Bug Fixes since HDF5-1.8.9
       the core VFD" sub-test if the source directory is read-only as the test
       fails to create its test files in the build directory. This has been
       fixed. HDFFV-8009 (AKC - 2012/07/06)
-  
+
 
     Parallel Library
     ----------------
@@ -5896,27 +5896,27 @@ Bug Fixes since HDF5-1.8.9
     Tools
     -----
     - h5repack: "h5repack -f NONE file1.h5 out.h5" command failed if
-      source file contains chunked dataset and a chunk dim is bigger than 
+      source file contains chunked dataset and a chunk dim is bigger than
       the dataset dim. Another issue is that the command changed max dims
-      if chunk dim is smaller than the dataset dim. These issue occurred 
+      if chunk dim is smaller than the dataset dim. These issue occurred
       when dataset size is smaller than 64k (compact size limit)  Fixed both.
       HDFFV-8012 (JKM 2012/09/24)
-    - h5diff: Fixed the counter in verbose mode (-v, -r) so that it will no 
-      longer add together the differences between datasets and the differences 
-      between attributes of those datasets. This change makes the output of 
-      verbose mode consistent for datasets, groups, and committed datatypes. 
+    - h5diff: Fixed the counter in verbose mode (-v, -r) so that it will no
+      longer add together the differences between datasets and the differences
+      between attributes of those datasets. This change makes the output of
+      verbose mode consistent for datasets, groups, and committed datatypes.
       HDFFV-5919 (JKM 2012/09/10)
-    - h5diff: Fixed the incorrect result when comparing attribute data 
+    - h5diff: Fixed the incorrect result when comparing attribute data
       values and the data type has the same class but different sizes.
       HDFFV-7942  (JKM 2012/08/15)
     - h5dump: Replaced single element fwrite with block writes.
       HDFFV-1208 (ADB 2012/08/13)
-    - h5diff: Fixed test failure for "make check" due to failure of 
+    - h5diff: Fixed test failure for "make check" due to failure of
       copying test files when performed in HDF5 source tree. Also applied
       to other tools.  HDFFV-8107 (JKM 2012/08/01)
-    - ph5diff: Fixed intermittent hang issue on a certain operation in 
-      parallel mode. It was detected by daily test for comparing 
-      non-comparable objects, but it could have occurred in other 
+    - ph5diff: Fixed intermittent hang issue on a certain operation in
+      parallel mode. It was detected by daily test for comparing
+      non-comparable objects, but it could have occurred in other
       operations depending on machine condition.  HDFFV-8003 (JKM 2012/08/01)
     - h5diff: Fixed the function COPY_TESTFILES_TO_TESTDIR() of testh5diff.sh
       to better report when there is an error in the file copying.
@@ -5924,22 +5924,22 @@ Bug Fixes since HDF5-1.8.9
     - h5dump: Fixed the sort by name display to maintain correct parent/child
       relationships between ascending/descending order.
       HDFFV-8095 (ADB 2012/07/12)
-    - h5dump: Fixed the display by creation order when using option -n 
+    - h5dump: Fixed the display by creation order when using option -n
       (print contents).
       HDFFV-5942 (ADB 2012/07/09)
-    - h5dump: Changed to allow H5T_CSET_UTF8 to be displayed in h5dump output. 
-      Used technique similar to what was done in h5ls (matches library 
+    - h5dump: Changed to allow H5T_CSET_UTF8 to be displayed in h5dump output.
+      Used technique similar to what was done in h5ls (matches library
       options).
       HDFFV-7999 (ADB 2012/05/23)
-    - h5diff: Fixed the tool so that it will not check and display the status 
-      of dangling links without setting the --follow-symlinks option. This 
-      also improved performance when comparing lots of external links without 
-      the --follow-symlinks option.  
+    - h5diff: Fixed the tool so that it will not check and display the status
+      of dangling links without setting the --follow-symlinks option. This
+      also improved performance when comparing lots of external links without
+      the --follow-symlinks option.
       HDFFV-7998 (JKM 2012/04/26)
 
     F90 API
     -------
-    
+
     - Fixed a typo in return value of the nh5dread_f_c function (was 1
       instead of 0 on success); fixed the return value to make it consistent
       with other Fortran functions; cleaned debug statements from the code.
@@ -5962,15 +5962,15 @@ Bug Fixes since HDF5-1.8.9
     High-Level APIs:
     ------
 
-    - Fixed problem with H5TBdelete_record destroying all data following the 
+    - Fixed problem with H5TBdelete_record destroying all data following the
       deletion of a row. (MSB- 2012/7/26)
 
-    - Fixed H5LTget_attribute_string not closing an object identifier when an 
+    - Fixed H5LTget_attribute_string not closing an object identifier when an
       error occurs. (MSB- 2012/7/21)
 
-    - Corrected the return type of H5TBAget_fill from herr_t to htri_t to 
-      reflect that a return value of 1 indicates that a fill value is 
-      present, 0 indicates a fill value is not present, and <0 indicates an 
+    - Corrected the return type of H5TBAget_fill from herr_t to htri_t to
+      reflect that a return value of 1 indicates that a fill value is
+      present, 0 indicates a fill value is not present, and <0 indicates an
       error.
 
     Fortran High-Level APIs:
@@ -6000,19 +6000,19 @@ Supported Platforms
     #1 SMP x86_64 GNU/Linux       compilers for 32-bit applications;
     (koala)                           Version 4.1.2 20080704 (Red Hat 4.1.2-52)
                                       Version 4.6.3
-                                  PGI C, Fortran, C++ for 64-bit target on 
+                                  PGI C, Fortran, C++ for 64-bit target on
                                   x86-64;
-                                      Version 11.9-0 
+                                      Version 11.9-0
                                       Version 12.5-0
-                                  Intel(R) C, C++, Fortran Compilers for 
-                                  applications running on Intel(R) 64; 
+                                  Intel(R) C, C++, Fortran Compilers for
+                                  applications running on Intel(R) 64;
                                       Version 12.1 (Build 20110811)
                                       Version 12.1 (Build 20120212)
                                   MPICH mpich2-1.4.1p1 compiled with
                                       gcc 4.1.2 and gfortran 4.1.2
 
-    Linux 2.6.32-220.7.1.el6.ppc64 gcc (GCC) 4.4.6 20110731 (Red Hat 4.4.6-3) 
-    #1 SMP ppc64 GNU/Linux        g++ (GCC) 4.4.6 20110731 
+    Linux 2.6.32-220.7.1.el6.ppc64 gcc (GCC) 4.4.6 20110731 (Red Hat 4.4.6-3)
+    #1 SMP ppc64 GNU/Linux        g++ (GCC) 4.4.6 20110731
     (ostrich)                     GNU Fortran (GCC) 4.4.6 20110731 (Red Hat 4.4.6-3)
 
     Linux 2.6.32-220.23.1.1chaos  Intel C, C++, Fortran Compilers
@@ -6071,14 +6071,14 @@ Tested Configuration Features Summary
 =====================================
 
     In the tables below
-          y   = tested 
+          y   = tested
           n   = not tested in this release
           C   = Cluster
           W   = Workstation
           x   = not working in this release
           dna = does not apply
           ( ) = footnote appears below second table
-          <blank> = testing incomplete on this feature or platform 
+          <blank> = testing incomplete on this feature or platform
 
 Platform                              C         F90/   F90      C++  zlib  SZIP
                                       parallel  F2003  parallel
@@ -6086,7 +6086,7 @@ Solaris2.10 32-bit                      n        y/y    n        y    y     y
 Solaris2.10 64-bit                      n        y/n    n        y    y     y
 Windows 7                               y        y/n    n        y    y     y
 Windows 7     x64                       y        y/n    n        y    y     y
-Mac OS X Snow Leopard 10.6.8 32-bit     n        y/y    n        y    y     n 
+Mac OS X Snow Leopard 10.6.8 32-bit     n        y/y    n        y    y     n
 Mac OS X Snow Leopard 10.6.8 64-bit     n        y/y    n        y    y     y
 Mac OS X Lion 10.7.3 32-bit             n        y/y    n        y    y     n
 Mac OS X Lion 10.7.3 64-bit             n        y/y    n        y    y     y
@@ -6101,25 +6101,25 @@ CentOS 5.5 Linux 2.6.18 x86_64 PGI      n        y/y    n        y    y     y
 Linux 2.6.32-220.7.1.el6.ppc64          n        y/n    n        y    y     y
 
 
-Platform                                 Shared  Shared    Shared    Thread-  
-                                         C libs  F90 libs  C++ libs  safe     
-Solaris2.10 32-bit                         y       y         y         y        
-Solaris2.10 64-bit                         n       n         n         n        
+Platform                                 Shared  Shared    Shared    Thread-
+                                         C libs  F90 libs  C++ libs  safe
+Solaris2.10 32-bit                         y       y         y         y
+Solaris2.10 64-bit                         n       n         n         n
 Windows 7                                  y       y         y         y
 Windows 7 x64                              y       y         y         y
-Mac OS X Snow Leopard 10.6.8 32-bit        y       n         y         n        
-Mac OS X Snow Leopard 10.6.8 64-bit        y       n         y         n        
-Mac OS X Lion 10.7.3 32-bit                y       n         y         y        
-Mac OS X Lion 10.7.3 64-bit                y       n         y         y        
-Mac OS X Mountain Lion 10.8.1 64-bit       y       n         y         y        
-AIX 5.3 32- and 64-bit                     n       n         n         y        
-CentOS 5.5 Linux 2.6.18-308 i686 GNU       y       y         y         y        
-CentOS 5.5 Linux 2.6.18-308 i686 Intel     y       y         y         n        
-CentOS 5.5 Linux 2.6.18-308 i686 PGI       y       y         y         n        
-CentOS 5.5 Linux 2.6.18 x86_64 GNU         y       y         y         y        
-CentOS 5.5 Linux 2.6.18 x86_64 Intel       y       y         y         n        
-CentOS 5.5 Linux 2.6.18 x86_64 PGI         y       y         y         n        
-Linux 2.6.32-220.7.1.el6.ppc64             y       y         y         n 
+Mac OS X Snow Leopard 10.6.8 32-bit        y       n         y         n
+Mac OS X Snow Leopard 10.6.8 64-bit        y       n         y         n
+Mac OS X Lion 10.7.3 32-bit                y       n         y         y
+Mac OS X Lion 10.7.3 64-bit                y       n         y         y
+Mac OS X Mountain Lion 10.8.1 64-bit       y       n         y         y
+AIX 5.3 32- and 64-bit                     n       n         n         y
+CentOS 5.5 Linux 2.6.18-308 i686 GNU       y       y         y         y
+CentOS 5.5 Linux 2.6.18-308 i686 Intel     y       y         y         n
+CentOS 5.5 Linux 2.6.18-308 i686 PGI       y       y         y         n
+CentOS 5.5 Linux 2.6.18 x86_64 GNU         y       y         y         y
+CentOS 5.5 Linux 2.6.18 x86_64 Intel       y       y         y         n
+CentOS 5.5 Linux 2.6.18 x86_64 PGI         y       y         y         n
+Linux 2.6.32-220.7.1.el6.ppc64             y       y         y         n
 
 Compiler versions for each platform are listed in the preceding
 "Supported Platforms" table.
@@ -6166,7 +6166,7 @@ The following platforms are not supported but have been tested for this release.
 
     SUSE 12.2 3.4.6-2.10-desktop #1 SMP PREEMPT x86_64 x86_64 x86_64 GNU/Linux
                                   gcc (SUSE Linux) 4.7.1
-                                  GNU Fortran (SUSE Linux) 4.7.1 
+                                  GNU Fortran (SUSE Linux) 4.7.1
                                   (cmake and autotools)
 
     Ubuntu 12.04 3.2.0-29-generic #46-Ubuntu SMP i686 GNU/Linux
@@ -6179,12 +6179,12 @@ The following platforms are not supported but have been tested for this release.
                                   GNU Fortran (Ubuntu/Linaro 4.6.3-1ubuntu5) 4.6.3
                                   (cmake and autotools)
                                   (Use optimization level -O1)
-    
+
     Cray Linux Environment (CLE)  PrgEnv-pgi/4.0.46
     hopper.nersc.gov              pgcc 12.5-0 64-bit target on x86-64 Linux -tp shanghai
                                   pgf90 12.5-0 64-bit target on x86-64 Linux -tp shanghai
                                   pgCC 12.5-0 64-bit target on x86-64 Linux -tp shanghai
-    
+
 
 Known Problems
 ==============
@@ -6192,7 +6192,7 @@ Known Problems
   machines that display extra output if an MPI task returns with a non-zero
   code.)
     Testing h5stat notexist.h5
-  
+
   The test actually runs and passes as expected. It is the extra output from
   the MPI process that causes the test script to fail. This will be fixed
   in the next release.  (AKC - 2012/10/25 - HDFFV-8233)
@@ -6207,7 +6207,7 @@ Known Problems
 
    h5dump --no-compact-subset -d "AHFINDERDIRECT::ah_centroid_t[0] it=0 tl=0"
      tno-subset.h5
-  
+
   This is due to the embedded spaces in the dataset name being interpreted
   by the command script launcher as meta-characters, thus passing three
   arguments to h5dump's -d flag. The command passes if run by hand, just
@@ -6218,14 +6218,14 @@ Known Problems
   to aprun -np X, because the H5lib_settings.c file was not generated
   properly. Not setting those environment variables works, because
   configure was able to automatically detect that it's a Cray system
-  and used the proper launch commands when necessary. 
+  and used the proper launch commands when necessary.
   (MSC - 2012/04/18)
 
 * The data conversion test dt_arith.c fails in "long double" to integer
   conversion on Ubuntu 11.10 (3.0.0.13 kernal) with GCC 4.6.1 if the library
   is built with optimization -O3 or -O2.  The older GCC (4.5) or newer kernal
-  (3.2.2 on Fedora) doesn't have the problem.  Users should lower the 
-  optimization level (-O1 or -O0) by defining CFLAGS in the command line of 
+  (3.2.2 on Fedora) doesn't have the problem.  Users should lower the
+  optimization level (-O1 or -O0) by defining CFLAGS in the command line of
   "configure" like:
 
       CFLAGS=-O1 ./configure
@@ -6253,7 +6253,7 @@ Known Problems
   that "make prefix=XXX install" no longer works for shared libraries. It
   still works correctly for static libraries. Therefore, if you want to
   install the HDF5 shared libraries in a location such as /usr/local/hdf5,
-  you need to specify the location via the --prefix option during configure 
+  you need to specify the location via the --prefix option during configure
   time. E.g, ./configure --prefix=/usr/local/hdf5 ...
   (AKC - 2011/05/07 - HDFFV-7583)
 
@@ -6261,8 +6261,8 @@ Known Problems
   be terminated by the alarm signal.  If that happens, one can increase the
   alarm seconds (default is 1200 seconds = 20 minutes) by setting the
   environment variable, $HDF5_ALARM_SECONDS, to a larger value such as 3600
-  (60 minutes).  Note that the t_shapesame test may fail in some systems 
-  (see the "While working on the 1.8.6 release..." problem below).  If 
+  (60 minutes).  Note that the t_shapesame test may fail in some systems
+  (see the "While working on the 1.8.6 release..." problem below).  If
   it does, it will waste more time if $HDF5_ALARM_SECONDS is set
   to a larger value.
   (AKC - 2011/05/07)
@@ -6293,7 +6293,7 @@ Known Problems
   (NAF - 2011/01/19)
 
 * The library's test dt_arith.c showed a compiler's rounding problem on
-  Cygwin when converting from unsigned long long to long double.  The 
+  Cygwin when converting from unsigned long long to long double.  The
   library's own conversion works fine.  We defined a macro for Cygwin to
   skip this test until we can solve the problem.
   (SLU - 2010/05/05 - HDFFV-1264)
@@ -6303,42 +6303,42 @@ Known Problems
   get_eoa and set_eoa callback functions.  A new callback function
   get_type_map was added in.  The public function H5FDrealloc was taken
   out in 1.8.  The problem only happens when users define their own driver
-  for 1.6 and try to plug in 1.8 library.  Because there's only one user 
-  complaining about it, we (Elena, Quincey, and I) decided to leave it as 
+  for 1.6 and try to plug in 1.8 library.  Because there's only one user
+  complaining about it, we (Elena, Quincey, and I) decided to leave it as
   it is (see bug report #1279).  Quincey will make a plan for 1.10.
   (SLU - 2010/02/02)
 
 * The --enable-static-exec configure flag will only statically link libraries
   if the static version of that library is present. If only the shared version
   of a library exists (i.e., most system libraries on Solaris, AIX, and Mac,
-  for example, only have shared versions), the flag should still result in a 
-  successful compilation, but note that the installed executables will not be 
-  fully static. Thus, the only guarantee on these systems is that the 
+  for example, only have shared versions), the flag should still result in a
+  successful compilation, but note that the installed executables will not be
+  fully static. Thus, the only guarantee on these systems is that the
   executable is statically linked with just the HDF5 library.
   (MAM - 2009/11/04)
-  
+
 * Parallel tests failed with 16 processes with data inconsistency at testphdf5
   / dataset_readAll. Parallel tests also failed with 32 and 64 processes with
   collective abort of all ranks at t_posix_compliant / allwrite_allread_blocks
   with MPI IO.
   (CMC - 2009/04/28)
 
-* On an Intel 64 Linux cluster (RH 4, Linux 2.6.9) with Intel 10.0 compilers, 
-  use -mp -O1 compilation flags to build the libraries. A higher level of 
-  optimization causes failures in several HDF5 library tests. 
+* On an Intel 64 Linux cluster (RH 4, Linux 2.6.9) with Intel 10.0 compilers,
+  use -mp -O1 compilation flags to build the libraries. A higher level of
+  optimization causes failures in several HDF5 library tests.
 
-* A dataset created or rewritten with a v1.6.3 library or after cannot be read 
+* A dataset created or rewritten with a v1.6.3 library or after cannot be read
   with the v1.6.2 library or before when the Fletcher32 EDC filter is enabled.
-  There was a bug in the calculation of the Fletcher32 checksum in the 
+  There was a bug in the calculation of the Fletcher32 checksum in the
   library before v1.6.3; the checksum value was not consistent between big-
-  endian and little-endian systems.  This bug was fixed in Release 1.6.3.  
-  However, after fixing the bug, the checksum value was no longer the same as 
-  before on little-endian system.  Library releases after 1.6.4 can still read 
-  datasets created or rewritten with an HDF5 library of v1.6.2 or before.  
+  endian and little-endian systems.  This bug was fixed in Release 1.6.3.
+  However, after fixing the bug, the checksum value was no longer the same as
+  before on little-endian system.  Library releases after 1.6.4 can still read
+  datasets created or rewritten with an HDF5 library of v1.6.2 or before.
   (SLU - 2005/06/30)
 
 
-%%%%1.8.9%%%%   
+%%%%1.8.9%%%%
 
 
 HDF5 version 1.8.9 released on 2012-05-09
@@ -6347,11 +6347,11 @@ HDF5 version 1.8.9 released on 2012-05-09
 INTRODUCTION
 ============
 
-This document describes the differences between HDF5-1.8.8 and 
-HDF5 1.8.9. It also contains information on the platforms tested and 
-known problems in HDF5-1.8.9. 
+This document describes the differences between HDF5-1.8.8 and
+HDF5 1.8.9. It also contains information on the platforms tested and
+known problems in HDF5-1.8.9.
 
-For more details, see the files HISTORY-1_0-1_8_0_rc3.txt 
+For more details, see the files HISTORY-1_0-1_8_0_rc3.txt
 and HISTORY-1_8.txt in the release_docs/ directory of the HDF5 source.
 
 Links to the HDF5 1.8.9 source code, documentation, and additional materials
@@ -6363,18 +6363,18 @@ The HDF5 1.8.9 release can be obtained from:
 
      http://www.hdfgroup.org/HDF5/release/obtain5.html
 
-User documentation for 1.8.9 can be accessed directly at this location: 
+User documentation for 1.8.9 can be accessed directly at this location:
 
      http://www.hdfgroup.org/HDF5/doc/
 
-New features in the HDF5-1.8.x release series, including brief general 
-descriptions of some new and modified APIs, are described in the "What's New 
+New features in the HDF5-1.8.x release series, including brief general
+descriptions of some new and modified APIs, are described in the "What's New
 in 1.8.0?" document:
 
      http://www.hdfgroup.org/HDF5/doc/ADGuide/WhatsNew180.html
 
-All new and modified APIs are listed in detail in the "HDF5 Software Changes 
-from Release to Release" document, in the section "Release 1.8.9 (current 
+All new and modified APIs are listed in detail in the "HDF5 Software Changes
+from Release to Release" document, in the section "Release 1.8.9 (current
 release) versus Release 1.8.8":
 
      http://www.hdfgroup.org/HDF5/doc/ADGuide/Changes.html
@@ -6401,7 +6401,7 @@ New Features
     Configuration
     -------------
     - None
-    
+
     Library
     -------
     - Added new feature to merge committed datatypes when copying objects,
@@ -6409,12 +6409,12 @@ New Features
       routines: H5Padd_merge_committed_dtype_path(),
       H5Pfree_merge_committed_dtype_paths(), H5Pset_mcdt_search_cb() and
       H5Pget_mcdt_search_cb().  (QAK - 2012/03/30)
-    - Added new feature which allows working with files in memory in the 
-      same ways files are worked with on disk. New API routines include 
-      H5Pset_file_image, H5Pget_file_image, H5Pset_file_image_callbacks, 
-      H5Pget_file_image_callbacks, H5Fget_file_image, and 
+    - Added new feature which allows working with files in memory in the
+      same ways files are worked with on disk. New API routines include
+      H5Pset_file_image, H5Pget_file_image, H5Pset_file_image_callbacks,
+      H5Pget_file_image_callbacks, H5Fget_file_image, and
       H5LTopen_file_image. (QAK - 2012/04/17)
- 
+
     Parallel Library
     ----------------
     - Corrected memory allocation error in MPI datatype construction code.
@@ -6423,7 +6423,7 @@ New Features
       MPI library to perform atomic operations. Some file systems (for
       example PVFS2) do not support atomic updates, so those routines
       would not be supported. (MSC - 2012/03/27 - HDFFV-7961)
- 
+
     Tools
     -----
     - h5repack: Added ability to set the metadata block size of the output
@@ -6431,29 +6431,29 @@ New Features
       (QAK - 2012/03/30)
     - h5stat: Added ability to display a summary of the file space usage for a
       file, with the '-S'/'--summary' command line parameter.  (QAK - 2012/03/28)
-    - h5dump: Added capability for "-a" option to show attributes containing "/" 
-      by using an escape character. For example, for a dataset "/dset" 
-      containing attribute "speed(m/h)", use "h5dump -a "/dset/speed(\/h)" 
+    - h5dump: Added capability for "-a" option to show attributes containing "/"
+      by using an escape character. For example, for a dataset "/dset"
+      containing attribute "speed(m/h)", use "h5dump -a "/dset/speed(\/h)"
       to show the content of the attribute. (PC - 2012/03/12 - HDFFV-7523)
     - h5dump: Added ability to apply command options across multiple files using a
       wildcard in the filename. Unix example; "h5dump -H -d Dataset1 tarr*.h5".
       Cross platform example; "h5dump -H -d Dataset1 tarray1.h5 tarray2.h5 tarray3.h5".
       (ADB - 2012/03/12 - HDFFV-7876).
     - h5dump: Added new option --no-compact-subset. This option will not
-      interpret the '[' character as starting the compact form of 
-      subsetting. This is useful when the "h5dump error: unable to 
+      interpret the '[' character as starting the compact form of
+      subsetting. This is useful when the "h5dump error: unable to
       open dataset "datset_name"" message is output because a dataset
       name contains a '[' character. (ADB - 2012/03/05 - HDFFV-7689).
     - h5repack: Improved performance for big chunked datasets (size > 128MB)
-      when used with the layout (-l) or compression (-f) options. 
-      Before this change, repacking datasets with chunks with a large first 
-      dimension would take extremely long. For example, repacking a dataset 
-      with chunk dimensions of 1024x5x1 might take many hours to process 
-      while changing a dataset with chunk dimensions set to 1x5x1024 
-      might take under an hour. After this change, processing the dataset 
-      with chunk dimensions of 1024x5x1 takes about 15 minutes, and processing 
+      when used with the layout (-l) or compression (-f) options.
+      Before this change, repacking datasets with chunks with a large first
+      dimension would take extremely long. For example, repacking a dataset
+      with chunk dimensions of 1024x5x1 might take many hours to process
+      while changing a dataset with chunk dimensions set to 1x5x1024
+      might take under an hour. After this change, processing the dataset
+      with chunk dimensions of 1024x5x1 takes about 15 minutes, and processing
       a dataset with chunk dimensions of 1x5x1024 takes about 14 minutes.
-      (JKM - 2012/03/01 - HDFFV-7862) 
+      (JKM - 2012/03/01 - HDFFV-7862)
 
     High-Level APIs
     ---------------
@@ -6483,7 +6483,7 @@ Bug Fixes since HDF5-1.8.8
     -------------
     - Fixed Makefile issue in which "-Wl," was not properly specified
       prior to -rpath when building parallel Fortran libraries with
-      an Intel compiler. (MAM - 2012/03/26) 
+      an Intel compiler. (MAM - 2012/03/26)
     - Makefiles generated by other packages using h5cc as the compiler
       no longer error when 'make' is invoked more than once in order
       to 'rebuild' after changes to source. (MAM - 2012/03/26)
@@ -6514,30 +6514,30 @@ Bug Fixes since HDF5-1.8.8
       runs out of memory, the library had a segmentation fault.  The fix is to
       return the error stack with proper information.
       (SLU - 2012/03/23 - HDFFV-7785)
-    - H5Pset_data_transform had a segmentation fault in some cases like x*-100.  
+    - H5Pset_data_transform had a segmentation fault in some cases like x*-100.
       It works correctly now and handles other cases like 100-x or 2/x.
       (SLU - 2012/03/15 - HDFFV-7922)
     - Fixed rare corruption bugs that could occur when using the new object
       header format. (NAF - 2012/03/15 - HDFFV-7879)
-    - Fixed an error that occurred when creating a contiguous dataset with a 
-      zero-sized dataspace and space allocation time set to 'early'. 
+    - Fixed an error that occurred when creating a contiguous dataset with a
+      zero-sized dataspace and space allocation time set to 'early'.
       (QAK - 2012/03/12)
     - Changed Windows thread creation to use _beginthread() instead of
       CreateThread().  Threads created by the latter can be killed in
       low-memory situations. (DER - 2012/02/10 - HDFFV-7780)
-    - Creating a dataset in a read-only file caused a segmentation fault when 
-      the file is closed.  It's fixed. The attempt to create a dataset will 
+    - Creating a dataset in a read-only file caused a segmentation fault when
+      the file is closed.  It's fixed. The attempt to create a dataset will
       fail with an error indicating the file is read-only.
-      (SLU - 2012/01/25 - HDFFV-7756) 
-    - Fixed a segmentation fault that could occur when shrinking a dataset 
+      (SLU - 2012/01/25 - HDFFV-7756)
+    - Fixed a segmentation fault that could occur when shrinking a dataset
       with chunks larger than 1 MB. (NAF - 2011/11/30 - HDFFV-7833)
     - Fixed a bug that could cause H5Oget_info to return the wrong address
       after copying a committed (named) datatype. (NAF - 2011/11/14)
     - The library allowed the conversion of strings between ASCII and UTF8
       We have corrected it to report an error under this situation.
       (SLU - 2011/11/8 - HDFFV-7582)
-    - Fixed a segmentation fault when the library tried to shrink the size 
-      of a compound datatype through H5Tset_size immediately after the 
+    - Fixed a segmentation fault when the library tried to shrink the size
+      of a compound datatype through H5Tset_size immediately after the
       datatype was created. (SLU - 2011/11/4 - HDFFV-7618)
 
     Parallel Library
@@ -6546,43 +6546,43 @@ Bug Fixes since HDF5-1.8.8
 
     Tools
     -----
-    - h5unjam: Fixed a segmentation fault that occurred when h5unjam was used 
+    - h5unjam: Fixed a segmentation fault that occurred when h5unjam was used
       with the -V (show version) option. (JKM - 2012/04/19 - HDFFV-8001)
-    - h5repack: Fixed a failure that occurred when repacking the chunk size 
-      of a specified chunked dataset with unlimited max dims. 
-      (JKM - 2012/04/11 - HDFFV-7993) 
-    - h5diff: Fixed a failure when comparing groups. Before the fix, if an 
-      object in a group was compared with an object in another group where 
+    - h5repack: Fixed a failure that occurred when repacking the chunk size
+      of a specified chunked dataset with unlimited max dims.
+      (JKM - 2012/04/11 - HDFFV-7993)
+    - h5diff: Fixed a failure when comparing groups. Before the fix, if an
+      object in a group was compared with an object in another group where
       both had the same name but the object type was different, then h5diff
       would fail. After the fix, h5diff detects such cases as non-comparable
-      and displays appropriate error messages. 
+      and displays appropriate error messages.
       (JKM - 2012/03/28 - HDFFV-7644)
-    - h5diff: If unique objects exist only in one file and if h5diff is set to 
-      exclude the unique objects with the --exclude-path option, then h5diff 
-      might miss excluding some objects. This was fixed to correctly exclude 
+    - h5diff: If unique objects exist only in one file and if h5diff is set to
+      exclude the unique objects with the --exclude-path option, then h5diff
+      might miss excluding some objects. This was fixed to correctly exclude
       objects. (JKM - 2012/03/20 - HDFFV-7837)
-    - h5diff: When two symbolic dangling links are compared with the 
-      --follow-symlinks option, the result should be the same. This worked when 
+    - h5diff: When two symbolic dangling links are compared with the
+      --follow-symlinks option, the result should be the same. This worked when
       comparing two files, but didn't work when comparing two objects.
       h5diff now works when comparing two objects.
       (JKM - 2012/03/09 - HDFFV-7835)
     - h5dump: Added the tools library error stack to properly catch error
       information generated within the library. (ADB - 2012/03/12 - HDFFV-7958)
-    - h5dump: Changed the process where an open link used to fail. Now dangling 
+    - h5dump: Changed the process where an open link used to fail. Now dangling
       links no longer throw error messages. (ADB - 2012/03/12 - HDFFV-7839)
-    - h5dump: Refactored code to remove duplicated functions. Split XML 
+    - h5dump: Refactored code to remove duplicated functions. Split XML
       functions from DDL functions. Corrected indentation and formatting
       errors. Also fixed subsetting counting overflow (HDFFV-5874). Verified
       all tools call tools_init() in main. The USER_BLOCK data now correctly
       displays within the SUPER_BLOCK info. NOTE: WHITESPACE IN THE OUTPUT
       HAS CHANGED. (ADB - 2012/02/17 - HDFFV-7560)
-    - h5diff: Fixed to prevent from displaying error stack message when 
+    - h5diff: Fixed to prevent from displaying error stack message when
       comparing two dangling symbolic links with the follow-symlinks option.
       (JKM - 2012/01/13 - HDFFV-7836)
-    - h5repack: Fixed a memory leak that occurred with the handling of 
+    - h5repack: Fixed a memory leak that occurred with the handling of
       variable length strings in attributes.
       (JKM - 2012/01/10 - HDFFV-7840)
-    - h5ls: Fixed a segmentation fault that occurred when accessing region 
+    - h5ls: Fixed a segmentation fault that occurred when accessing region
       reference data in an attribute. (JKM - 2012/01/06 - HDFFV-7838)
 
     F90 API
@@ -6599,9 +6599,9 @@ Bug Fixes since HDF5-1.8.8
 
     Fortran High-Level APIs:
     ------
-    - h5ltget_attribute_string_f: The h5ltget_attribute_string_f used to return 
-      the C NULL character in the returned character buffer. The returned 
-      charactor buffer now does not return the C NULL character; the buffer 
+    - h5ltget_attribute_string_f: The h5ltget_attribute_string_f used to return
+      the C NULL character in the returned character buffer. The returned
+      charactor buffer now does not return the C NULL character; the buffer
       is blank-padded if needed. (MSB - 2012/03/23)
 
 
@@ -6644,19 +6644,19 @@ The following platforms and compilers have been tested for this release.
     #1 SMP x86_64 GNU/Linux       compilers for 32-bit applications;
     (koala)                           Version 4.1.2 20080704 (Red Hat 4.1.2-52)
                                       Version 4.5.2
-                                  PGI C, Fortran, C++ for 64-bit target on 
+                                  PGI C, Fortran, C++ for 64-bit target on
                                   x86-64;
                                       Version 11.9-0 (64-bit)
                                       Version 11.8-0 (32-bit)
-                                  Intel(R) C, C++, Fortran Compilers for 
-                                  applications running on Intel(R) 64; 
+                                  Intel(R) C, C++, Fortran Compilers for
+                                  applications running on Intel(R) 64;
                                       Version 12.0
                                       Version 12.1
                                   MPICH mpich2-1.3.1 compiled with
                                       gcc 4.1.2 and gfortran 4.1.2
 
-    Linux 2.6.32-220.7.1.el6.ppc64 gcc (GCC) 4.4.6 20110731 (Red Hat 4.4.6-3) 
-    #1 SMP ppc64 GNU/Linux        g++ (GCC) 4.4.6 20110731 
+    Linux 2.6.32-220.7.1.el6.ppc64 gcc (GCC) 4.4.6 20110731 (Red Hat 4.4.6-3)
+    #1 SMP ppc64 GNU/Linux        g++ (GCC) 4.4.6 20110731
     (ostrich)                     GNU Fortran (GCC) 4.4.6 20110731 (Red Hat 4.4.6-3)
 
     Linux 2.6.18-108chaos         Intel C, C++, Fortran Compilers Version 11.1
@@ -6677,7 +6677,7 @@ The following platforms and compilers have been tested for this release.
     SGI Altix UV                  Intel(R) C, Fortran Compilers
     SGI ProPack 7 Linux               Version 11.1 20100806
     2.6.32.24-0.2.1.2230.2.PTF-   SGI MPT 2.02
-    default #1 SMP                
+    default #1 SMP
     (NCSA ember)
 
     Dell NVIDIA Cluster           Intel(R) C, Fortran Compilers
@@ -6741,7 +6741,7 @@ The following platforms and compilers have been tested for this release.
 
     SUSE 12.1 3.1.9-1.4-desktop #1 SMP PREEMPT x86_64 x86_64 x86_64 GNU/Linux
                                   gcc (SUSE Linux) 4.6.2
-                                  GNU Fortran (SUSE Linux) 4.6.2 
+                                  GNU Fortran (SUSE Linux) 4.6.2
 
     Ubuntu 11.10 3.0.0-16-generic #29-Ubuntu SMP i686 GNU/Linux
                                   gcc (Ubuntu/Linaro 4.6.1-9ubuntu3) 4.6.1
@@ -6755,20 +6755,20 @@ The following platforms and compilers have been tested for this release.
     hopper.nersc.gov              pgcc 11.9-0 64-bit target on x86-64 Linux -tp k8e
                                   pgf90 11.9-0 64-bit target on x86-64 Linux -tp k8e
                                   pgCC 11.9-0 64-bit target on x86-64 Linux -tp k8e
-    
+
 
 Tested Configuration Features Summary
 =====================================
 
     In the tables below
-          y   = tested 
+          y   = tested
           n   = not tested in this release
           C   = Cluster
           W   = Workstation
           x   = not working in this release
           dna = does not apply
           ( ) = footnote appears below second table
-          <blank> = testing incomplete on this feature or platform 
+          <blank> = testing incomplete on this feature or platform
 
 Platform                                 C        F90    F90      C++   zlib  SZIP
                                          parallel        parallel
@@ -6778,7 +6778,7 @@ Windows XP                                 n        y(4)   n        y     y
 Windows XP x64                             n        y(4)   n        y     y     y
 Windows Vista                              n        y(4)   n        y     y     y
 Windows Vista x64                          n        y(4)   n        y     y     y
-Mac OS X Snow Leopard 10.6.8 32-bit        n        y      n        y     y     n 
+Mac OS X Snow Leopard 10.6.8 32-bit        n        y      n        y     y     n
 Mac OS X Snow Leopard 10.6.8 64-bit        n        y      n        y     y     y
 Mac OS X Lion 10.7.3 32-bit                n        y      n        y     y     n
 Mac OS X Lion 10.7.3 64-bit                n        y      n        y     y     y
@@ -6796,28 +6796,28 @@ Red Hat Enterprise Linux 6                 y        y      y        y     y
 CLE hopper.nersc.gov                       y        y(3)   y        y     y     n
 
 
-Platform                                 Shared  Shared    Shared    Thread-  
-                                         C libs  F90 libs  C++ libs  safe     
-Solaris2.10 32-bit                         y       y         y         y        
-Solaris2.10 64-bit                         n       n         n         n        
-Windows XP                                 y       y(4)      y         n        
-Windows XP x64                             y       y(4)      y         n        
+Platform                                 Shared  Shared    Shared    Thread-
+                                         C libs  F90 libs  C++ libs  safe
+Solaris2.10 32-bit                         y       y         y         y
+Solaris2.10 64-bit                         n       n         n         n
+Windows XP                                 y       y(4)      y         n
+Windows XP x64                             y       y(4)      y         n
 Windows Vista                              y       y(4)      y         y
 Windows Vista x64                          y       y(4)      y         y
-Mac OS X Snow Leopard 10.6.8 32-bit        y       n         y         n        
-Mac OS X Snow Leopard 10.6.8 64-bit        y       n         y         n        
-Mac OS X Lion 10.7.3 32-bit                y       n         y         y        
-Mac OS X Lion 10.7.3 64-bit                y       n         y         y        
-AIX 5.3 32- and 64-bit                     n       n         n         y        
-FreeBSD 8.2-STABLE 32&64 bit               y       x         x         y        
-CentOS 5.5 Linux 2.6.18-194 i686 GNU (1)W  y       y(2)      y         y        
-CentOS 5.5 Linux 2.6.18-194 i686 Intel  W  y       y         y         n        
-CentOS 5.5 Linux 2.6.18-194 i686 PGI    W  y       y         y         n        
-CentOS 5.5 Linux 2.6.18 x86_64 GNU (1)  W  y       y         y         y        
-CentOS 5.5 Linux 2.6.18 x86_64 Intel    W  y       y         y         n        
-CentOS 5.5 Linux 2.6.18 x86_64 PGI      W  y       y         y         n        
-Linux 2.6.32-220.7.1.el6.ppc64             y       y         y         n 
-SGI ProPack 7 Linux 2.6.32.24              y       y         y         n 
+Mac OS X Snow Leopard 10.6.8 32-bit        y       n         y         n
+Mac OS X Snow Leopard 10.6.8 64-bit        y       n         y         n
+Mac OS X Lion 10.7.3 32-bit                y       n         y         y
+Mac OS X Lion 10.7.3 64-bit                y       n         y         y
+AIX 5.3 32- and 64-bit                     n       n         n         y
+FreeBSD 8.2-STABLE 32&64 bit               y       x         x         y
+CentOS 5.5 Linux 2.6.18-194 i686 GNU (1)W  y       y(2)      y         y
+CentOS 5.5 Linux 2.6.18-194 i686 Intel  W  y       y         y         n
+CentOS 5.5 Linux 2.6.18-194 i686 PGI    W  y       y         y         n
+CentOS 5.5 Linux 2.6.18 x86_64 GNU (1)  W  y       y         y         y
+CentOS 5.5 Linux 2.6.18 x86_64 Intel    W  y       y         y         n
+CentOS 5.5 Linux 2.6.18 x86_64 PGI      W  y       y         y         n
+Linux 2.6.32-220.7.1.el6.ppc64             y       y         y         n
+SGI ProPack 7 Linux 2.6.32.24              y       y         y         n
 Red Hat Enterprise Linux 6                 y       y         y         n
 CLE hopper.nersc.gov                       n       n         n         n
 
@@ -6850,7 +6850,7 @@ Known Problems
   fails to create its test files in the build directory. This will be
   resolved in a future release.
   (AKC - 2012/05/05 - HDFFV-8009)
-  
+
 * The dt_arith test reports several errors involving "long double" on
   Mac OS X 10.7 Lion when any level of optimization is enabled. The test does
   not fail in debug mode. This will be addressed in a future release.
@@ -6861,7 +6861,7 @@ Known Problems
 
    h5dump --no-compact-subset -d "AHFINDERDIRECT::ah_centroid_t[0] it=0 tl=0"
      tno-subset.h5
-  
+
   This is due to the embedded spaces in the dataset name being interpreted
   by the command script launcher as meta-characters, thus passing three
   arguments to h5dump's -d flag. The command passes if run by hand, just
@@ -6877,14 +6877,14 @@ Known Problems
   to aprun -np X, because the H5lib_settings.c file was not generated
   properly. Not setting those environment variables works, because
   configure was able to automatically detect that it's a Cray system
-  and used the proper launch commands when necessary. 
+  and used the proper launch commands when necessary.
   (MSC - 2012/04/18)
 
 * The data conversion test dt_arith.c fails in "long double" to integer
   conversion on Ubuntu 11.10 (3.0.0.13 kernal) with GCC 4.6.1 if the library
   is built with optimization -O3 or -O2.  The older GCC (4.5) or newer kernal
-  (3.2.2 on Fedora) doesn't have the problem.  Users should lower the 
-  optimization level (-O1 or -O0) by defining CFLAGS in the command line of 
+  (3.2.2 on Fedora) doesn't have the problem.  Users should lower the
+  optimization level (-O1 or -O0) by defining CFLAGS in the command line of
   "configure" like:
 
       CFLAGS=-O1 ./configure
@@ -6912,7 +6912,7 @@ Known Problems
   that "make prefix=XXX install" no longer works for shared libraries. It
   still works correctly for static libraries. Therefore, if you want to
   install the HDF5 shared libraries in a location such as /usr/local/hdf5,
-  you need to specify the location via the --prefix option during configure 
+  you need to specify the location via the --prefix option during configure
   time. E.g, ./configure --prefix=/usr/local/hdf5 ...
   (AKC - 2011/05/07 - HDFFV-7583)
 
@@ -6920,8 +6920,8 @@ Known Problems
   be terminated by the alarm signal.  If that happens, one can increase the
   alarm seconds (default is 1200 seconds = 20 minutes) by setting the
   environment variable, $HDF5_ALARM_SECONDS, to a larger value such as 3600
-  (60 minutes).  Note that the t_shapesame test may fail in some systems 
-  (see the "While working on the 1.8.6 release..." problem below).  If 
+  (60 minutes).  Note that the t_shapesame test may fail in some systems
+  (see the "While working on the 1.8.6 release..." problem below).  If
   it does, it will waste more time if $HDF5_ALARM_SECONDS is set
   to a larger value.
   (AKC - 2011/05/07)
@@ -6952,7 +6952,7 @@ Known Problems
   (NAF - 2011/01/19)
 
 * The library's test dt_arith.c showed a compiler's rounding problem on
-  Cygwin when converting from unsigned long long to long double.  The 
+  Cygwin when converting from unsigned long long to long double.  The
   library's own conversion works fine.  We defined a macro for Cygwin to
   skip this test until we can solve the problem.
   (SLU - 2010/05/05 - HDFFV-1264)
@@ -6962,8 +6962,8 @@ Known Problems
   get_eoa and set_eoa callback functions.  A new callback function
   get_type_map was added in.  The public function H5FDrealloc was taken
   out in 1.8.  The problem only happens when users define their own driver
-  for 1.6 and try to plug in 1.8 library.  Because there's only one user 
-  complaining about it, we (Elena, Quincey, and I) decided to leave it as 
+  for 1.6 and try to plug in 1.8 library.  Because there's only one user
+  complaining about it, we (Elena, Quincey, and I) decided to leave it as
   it is (see bug report #1279).  Quincey will make a plan for 1.10.
   (SLU - 2010/02/02)
 
@@ -6975,18 +6975,18 @@ Known Problems
 * The --enable-static-exec configure flag will only statically link libraries
   if the static version of that library is present. If only the shared version
   of a library exists (i.e., most system libraries on Solaris, AIX, and Mac,
-  for example, only have shared versions), the flag should still result in a 
-  successful compilation, but note that the installed executables will not be 
-  fully static. Thus, the only guarantee on these systems is that the 
+  for example, only have shared versions), the flag should still result in a
+  successful compilation, but note that the installed executables will not be
+  fully static. Thus, the only guarantee on these systems is that the
   executable is statically linked with just the HDF5 library.
   (MAM - 2009/11/04)
-  
+
 * The PathScale MPI implementation, accessing a Panasas file system, would
   cause H5Fcreate() with H5F_ACC_EXCL to fail even when the file does not
   exist. This is due to the MPI_File_open() call failing if the mode has
   the MPI_MODE_EXCL bit set.
   (AKC - 2009/08/11 - HDFFV-988)
- 
+
 * Parallel tests failed with 16 processes with data inconsistency at testphdf5
   / dataset_readAll. Parallel tests also failed with 32 and 64 processes with
   collective abort of all ranks at t_posix_compliant / allwrite_allread_blocks
@@ -7022,30 +7022,30 @@ Known Problems
   echo SKIP H5LSTEST $FILEOUT
   ==================================================
   (AKC - 2008/11/10)
-  
+
 * For Red Storm, a Cray XT3 system, the yod command sometimes gives the
   message,  "yod allocation delayed for node recovery".  This interferes with
   test suites that do not expect to see this message.  See the section of "Red
   Storm" in file INSTALL_parallel for a way to deal with this problem.
   (AKC - 2008/05/28)
 
-* On an Intel 64 Linux cluster (RH 4, Linux 2.6.9) with Intel 10.0 compilers, 
-  use -mp -O1 compilation flags to build the libraries. A higher level of 
-  optimization causes failures in several HDF5 library tests. 
+* On an Intel 64 Linux cluster (RH 4, Linux 2.6.9) with Intel 10.0 compilers,
+  use -mp -O1 compilation flags to build the libraries. A higher level of
+  optimization causes failures in several HDF5 library tests.
 
-* On mpich 1.2.5 and 1.2.6, if more than two processes contribute no IO and 
-  the application asks to do collective IO, we have found that when using 4 
-  processors, a simple collective write will sometimes be hung. This can be 
+* On mpich 1.2.5 and 1.2.6, if more than two processes contribute no IO and
+  the application asks to do collective IO, we have found that when using 4
+  processors, a simple collective write will sometimes be hung. This can be
   verified with t_mpi test under testpar.
 
-* A dataset created or rewritten with a v1.6.3 library or after cannot be read 
+* A dataset created or rewritten with a v1.6.3 library or after cannot be read
   with the v1.6.2 library or before when the Fletcher32 EDC filter is enabled.
-  There was a bug in the calculation of the Fletcher32 checksum in the 
+  There was a bug in the calculation of the Fletcher32 checksum in the
   library before v1.6.3; the checksum value was not consistent between big-
-  endian and little-endian systems.  This bug was fixed in Release 1.6.3.  
-  However, after fixing the bug, the checksum value was no longer the same as 
-  before on little-endian system.  Library releases after 1.6.4 can still read 
-  datasets created or rewritten with an HDF5 library of v1.6.2 or before.  
+  endian and little-endian systems.  This bug was fixed in Release 1.6.3.
+  However, after fixing the bug, the checksum value was no longer the same as
+  before on little-endian system.  Library releases after 1.6.4 can still read
+  datasets created or rewritten with an HDF5 library of v1.6.2 or before.
   (SLU - 2005/06/30)
 
 * On IBM AIX systems, parallel HDF5 mode will fail some tests with error
@@ -7053,17 +7053,17 @@ Known Problems
   Set the environment variable MP_INFOLEVEL to 0 to minimize the messages
   and run the tests again.
 
-  The tests may fail with messages like "The socket name is already in use",  
-  but HDF5 does not use sockets.  This failure is due to problems with the 
-  poe command trying to set up the debug socket.  To resolve this problem, 
-  check to see whether there are many old /tmp/s.pedb.* files staying around.  
-  These are sockets used by the poe command and left behind due to failed 
-  commands.  First, ask your system administrator to clean them out.  
+  The tests may fail with messages like "The socket name is already in use",
+  but HDF5 does not use sockets.  This failure is due to problems with the
+  poe command trying to set up the debug socket.  To resolve this problem,
+  check to see whether there are many old /tmp/s.pedb.* files staying around.
+  These are sockets used by the poe command and left behind due to failed
+  commands.  First, ask your system administrator to clean them out.
   Lastly, request IBM to provide a means to run poe without the debug socket.
   (AKC - 2004/12/08)
 
 
-%%%%1.8.8%%%%   
+%%%%1.8.8%%%%
 
 
 HDF5 version 1.8.8 released on 2011-11-15
@@ -7072,10 +7072,10 @@ HDF5 version 1.8.8 released on 2011-11-15
 INTRODUCTION
 ============
 
-This document describes the differences between HDF5-1.8.7 and 
-HDF5 1.8.8, and contains information on the platforms tested and 
-known problems in HDF5-1.8.8. 
-For more details, see the files HISTORY-1_0-1_8_0_rc3.txt 
+This document describes the differences between HDF5-1.8.7 and
+HDF5 1.8.8, and contains information on the platforms tested and
+known problems in HDF5-1.8.8.
+For more details, see the files HISTORY-1_0-1_8_0_rc3.txt
 and HISTORY-1_8.txt in the release_docs/ directory of the HDF5 source.
 
 Links to the HDF5 1.8.8 source code, documentation, and additional materials
@@ -7087,18 +7087,18 @@ The HDF5 1.8.8 release can be obtained from:
 
      http://www.hdfgroup.org/HDF5/release/obtain5.html
 
-User documentation for 1.8.8 can be accessed directly at this location: 
+User documentation for 1.8.8 can be accessed directly at this location:
 
      http://www.hdfgroup.org/HDF5/doc/
 
-New features in the HDF5-1.8.x release series, including brief general 
-descriptions of some new and modified APIs, are described in the "What's New 
+New features in the HDF5-1.8.x release series, including brief general
+descriptions of some new and modified APIs, are described in the "What's New
 in 1.8.0?" document:
 
      http://www.hdfgroup.org/HDF5/doc/ADGuide/WhatsNew180.html
 
-All new and modified APIs are listed in detail in the "HDF5 Software Changes 
-from Release to Release" document, in the section "Release 1.8.8 (current 
+All new and modified APIs are listed in detail in the "HDF5 Software Changes
+from Release to Release" document, in the section "Release 1.8.8 (current
 release) versus Release 1.8.7":
 
      http://www.hdfgroup.org/HDF5/doc/ADGuide/Changes.html
@@ -7124,15 +7124,15 @@ New Features
 
     Configuration
     -------------
-    - Added the --enable-fortran2003 flag to enable Fortran2003 support 
+    - Added the --enable-fortran2003 flag to enable Fortran2003 support
       in the HDF5 Fortran library. The flag should be used along with the
-      --enable-fortran flag and takes affect only when the Fortran compiler 
+      --enable-fortran flag and takes affect only when the Fortran compiler
       is Fortran2003 compliant. (EIP - 2011/11/14)
     - Added checks for clock_gettime and mach/mach_time.h to both configure and
       CMake.  This will support the move from gettimeofday to clock_gettime's
       monotonic timer in the profiling code in a future release.
       (DER - 2011/10/12)
-    
+
     Library
     -------
     - The Windows VFD code has been removed with the exception of the functions
@@ -7144,13 +7144,13 @@ New Features
       (DER - 2011/10/12 - HDFFV-7740, HDFFV-7744)
     - H5Tcreate now supports the string type (fixed-length and variable-
       length). (SLU - 2011/05/20)
- 
+
     Parallel Library
     ----------------
     - Added new H5Pget_mpio_actual_chunk_opt_mode and
       H5Pget_mpio_actual_io_mode API routines for querying whether/how
       a collective I/O operation completed.  (QAK - 2011/10/12)
- 
+
     Tools
     -----
     - None
@@ -7187,8 +7187,8 @@ New Features
           h5rderefrence_f
           h5rget_name_f
           h5rget_obj_type_f
-      - Subroutines overloaded with the C_PTR derived type 
-        and simplified signatures: 
+      - Subroutines overloaded with the C_PTR derived type
+        and simplified signatures:
           h5aread_f
           h5awrite_f
           h5dread_f
@@ -7228,7 +7228,7 @@ Bug Fixes since HDF5-1.8.7
       trace statement fixup. (DER - 2011/08/25)
     - The --enable-h5dump-packed-bits configure option has been removed.
       The h5dump code that this option conditionally enabled is now always
-      compiled into h5dump. Please refer to the h5dump reference manual for 
+      compiled into h5dump. Please refer to the h5dump reference manual for
       usage of the packed bits feature. (MAM - 2011/06/23 - HDFFV-7592)
     - Configure now uses the same flags and symbols in its tests that are
       used to build the library. (DER - 2011/05/24)
@@ -7250,14 +7250,14 @@ Bug Fixes since HDF5-1.8.7
       I/O sizes (and remove compiler warnings) between Windows and true POSIX
       systems.  (DER - 2011/10/12)
     - Corrected some Windows behavior in the SEC2 and log VFDs.  This mainly
-      involved datatype correctness fixes, Windows API call error checks, 
+      involved datatype correctness fixes, Windows API call error checks,
       and adding the volume serial number to the VFD cmp functions.
       (DER - 2011/10/12)
-    - Converted post-checks for the appropriate POSIX I/O sizes to pre-checks 
-      in order to avoid platform-specific or undefined behavior.  
+    - Converted post-checks for the appropriate POSIX I/O sizes to pre-checks
+      in order to avoid platform-specific or undefined behavior.
       (DER - 2011/10/12)
-    - #ifdef _WIN32 instances have been changed to #ifdef H5_HAVE_WIN32_API. 
-      H5_HAVE_VISUAL_STUDIO checks have been added where necessary. This is in 
+    - #ifdef _WIN32 instances have been changed to #ifdef H5_HAVE_WIN32_API.
+      H5_HAVE_VISUAL_STUDIO checks have been added where necessary. This is in
       CMake only as configure never sets _WIN32. (ADB - 2011/09/12)
     - CLANG compiler with the options -fcatch-undefined-behavior and -ftrapv
       discovered 3 problems in tests and tools' library:
@@ -7265,7 +7265,7 @@ Bug Fixes since HDF5-1.8.7
            caused undefined behavior.
         2. In dt_arith.c, the INIT_INTEGER macro definition has an overflow
            when the value is a negative minimal and is being subtracted from one.
-        3. In tools/lib/h5tools_str.c, right shifting an int value for 32 bits 
+        3. In tools/lib/h5tools_str.c, right shifting an int value for 32 bits
            or more caused undefined behavior.
       All the problems have been corrected. (SLU - 2011/09/02 - HDFFV-7674)
     - H5Epush2() now has the correct trace functionality (this is related to the
@@ -7273,17 +7273,17 @@ Bug Fixes since HDF5-1.8.7
       (DER - 2011/08/25)
     - Corrected mismatched function name typo of h5pget_dxpl_mpio_c and
       h5pfill_value_defined_c. (AKC - 2011/08/22 - HDFFV-7641)
-    - Corrected an internal error in the library where objects that use committed 
+    - Corrected an internal error in the library where objects that use committed
       (named) datatypes and were accessed from two different file IDs could confuse
       the two and cause erroneous failures. (QAK - 2011/07/18 - HDFFV-7638)
-    - In v1.6 of the library, there was an EOA for the whole MULTI file saved in the 
-      super block.  We took it out in v1.8 of the library because it's meaningless 
-      for the MULTI file. v1.8 of the library saves the EOA for the metadata file 
+    - In v1.6 of the library, there was an EOA for the whole MULTI file saved in the
+      super block.  We took it out in v1.8 of the library because it's meaningless
+      for the MULTI file. v1.8 of the library saves the EOA for the metadata file
       instead, but this caused a backward compatibility problem.
       A v1.8 library couldn't open the file created with the v1.6 library. We
       fixed the problem by checking the EOA value to detect the file
-      created with v1.6 library. (SLU - 2011/06/22) 
-    - When a dataset had filters and reading data failed, the error message 
+      created with v1.6 library. (SLU - 2011/06/22)
+    - When a dataset had filters and reading data failed, the error message
       didn't say which filter wasn't registered. It's fixed now. (SLU - 2011/06/03)
 
     Parallel Library
@@ -7298,71 +7298,71 @@ Bug Fixes since HDF5-1.8.7
 
     Tools
     -----
-    - h5diff: fixed segfault over non-comparable attribute with different 
+    - h5diff: fixed segfault over non-comparable attribute with different
       dimention or rank, along with '-c' option to display details.
       (JKM - 2011/10/24 - HDFFV-7770)
-    - Fixed h5diff to display all the comparable objects and attributes 
+    - Fixed h5diff to display all the comparable objects and attributes
       regardless of detecting non-comparables. (JKM - 2011/09/16 - HDFFV-7693)
-    - Fixed h5repack to update the values of references(object and region) of 
-      attributes in h5repack for 1) references, 2) arrays of references, 
-      3) variable-length references, and 4) compound references. 
+    - Fixed h5repack to update the values of references(object and region) of
+      attributes in h5repack for 1) references, 2) arrays of references,
+      3) variable-length references, and 4) compound references.
       (PC - 2011/09/14 - HDFFV-5932)
-    - h5diff: fixed a segfault over a dataset with container types 
-      array and variable-length (vlen) along with multiple nested compound types. 
+    - h5diff: fixed a segfault over a dataset with container types
+      array and variable-length (vlen) along with multiple nested compound types.
       Example: compound->array->compound, compound->vlen->compound.
       (JKM - 2011/09/01 - HDFFV-7712)
     - h5repack: added macro to handle a failure in H5Dread/write when memory
       allocation failed inside the library. (PC - 2011/08/19)
-    - Fixed h5jam to not to allow the specifying of an HDF5 formatted file as 
-      an input file for the -u (user block file) option. The original HDF5 file 
-      would not be accessible if this behavior was allowed. 
+    - Fixed h5jam to not to allow the specifying of an HDF5 formatted file as
+      an input file for the -u (user block file) option. The original HDF5 file
+      would not be accessible if this behavior was allowed.
       (JKM - 2011/08/19 - HDFFV-5941)
     - Revised the command help pages of h5jam and h5unjam. The descriptions
-      were not up to date and some were missing. 
+      were not up to date and some were missing.
       (JKM - 2011/08/15 - HDFFV-7515)
-    - Fixed h5dump to correct the schema location: 
-      <hdf5:HDF5-File 
-      xmlns:hdf5="http://hdfgroup.org/HDF5/XML/schema/HDF5-File" 
-      xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" 
-      xsi:schemaLocation="http://hdfgroup.org/HDF5/XML/schema/HDF5-File 
+    - Fixed h5dump to correct the schema location:
+      <hdf5:HDF5-File
+      xmlns:hdf5="http://hdfgroup.org/HDF5/XML/schema/HDF5-File"
+      xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
+      xsi:schemaLocation="http://hdfgroup.org/HDF5/XML/schema/HDF5-File
       http://www.hdfgroup.org/HDF5/XML/schema/HDF5-File.xsd">
       (ADB - 2011/08/10)
-    - h5repack: h5repack failed to copy a dataset if the layout is changed 
+    - h5repack: h5repack failed to copy a dataset if the layout is changed
       from chunked with unlimited dimensions to contiguous.
       (PC - 2011/07/15 - HDFFV-7649)
-    - Fixed h5diff: the "--delta" option considers two NaN of the same type 
-      are different. This is wrong based on the h5diff description in the 
+    - Fixed h5diff: the "--delta" option considers two NaN of the same type
+      are different. This is wrong based on the h5diff description in the
       Reference Manual. (PC - 2011/07/15 - HDFFV-7656)
     - Fixed h5diff to display an instructive error message and exit with
-      an instructive error message when mutually exclusive options 
-      (-d, -p and --use-system-epsilon) are used together. 
+      an instructive error message when mutually exclusive options
+      (-d, -p and --use-system-epsilon) are used together.
       (JKM - 2011/07/07 - HDFFV-7600)
     - Fixed h5dump so that it displays the first line of each element in correct
-      position for multiple dimention array types. Before this fix, 
+      position for multiple dimention array types. Before this fix,
       the first line of each element in an array was
       displayed after the last line of previous element without
       moving to the next line (+indentation).
       (JKM - 2011/06/15 - HDFFV-5878)
-    - Fixed h5dump so that it will display the correct value for 
-      H5T_STD_I8LE datasets on the Blue-gene system (ppc64, linux, Big-Endian, 
+    - Fixed h5dump so that it will display the correct value for
+      H5T_STD_I8LE datasets on the Blue-gene system (ppc64, linux, Big-Endian,
       clustering). (AKC & JKM - 2011/05/12 - HDFFV-7594)
     - Fixed h5diff to compare a file to itself correctly. Previously h5diff
-      reported either the files were different or not compatible in certain 
-      cases even when comparing a file to itself. This fix also improves 
-      performance when comparing the same target objects through verifying 
-      the object and file addresses before comparing the details 
-      in the objects. Examples of details are datasets and attributes. 
+      reported either the files were different or not compatible in certain
+      cases even when comparing a file to itself. This fix also improves
+      performance when comparing the same target objects through verifying
+      the object and file addresses before comparing the details
+      in the objects. Examples of details are datasets and attributes.
       (XCAO & JKM - 2011/05/06 - HDFFV-5928)
 
     F90 API
     -------
-    - Modified the h5open_f and h5close_f subroutines to not to call H5open 
-      and H5close correspondingly. While the H5open call just adds overhead, 
-      the H5close call called by a Fortran application shuts down the HDF5 
-      library. This makes the library inaccessible to the application. 
+    - Modified the h5open_f and h5close_f subroutines to not to call H5open
+      and H5close correspondingly. While the H5open call just adds overhead,
+      the H5close call called by a Fortran application shuts down the HDF5
+      library. This makes the library inaccessible to the application.
       (EIP & SB - 2011/10/13 - HDFFV-915)
-    - Fixed h5tget_tag_f where the length of the C string was used to 
-      repack the C string into the Fortran string. This lead to memory 
+    - Fixed h5tget_tag_f where the length of the C string was used to
+      repack the C string into the Fortran string. This lead to memory
       corruption in the calling program. (SB - 2011/07/26)
     - Added defined constants:
         H5T_ORDER_MIXED_F (HDFFV-2767)
@@ -7382,13 +7382,13 @@ Bug Fixes since HDF5-1.8.7
 
     High-Level APIs:
     ------
-    - Fixed the H5LTdtype_to_text function.  It had some memory problems when 
+    - Fixed the H5LTdtype_to_text function.  It had some memory problems when
       dealing with some complicated data types. (SLU - 2011/10/19 - HDFFV-7701)
-    - Fixed H5DSset_label seg faulting when retrieving the length of a 
+    - Fixed H5DSset_label seg faulting when retrieving the length of a
       dimension label that was not set. (SB - 2011/08/07 - HDFFV-7673)
-    - Fixed a dimension scale bug where if you create a dimscale, attach two 
-      datasets to it, and then unattach them, you get an error if they are 
-      unattached in order, but no error if you unattach them in reverse order. 
+    - Fixed a dimension scale bug where if you create a dimscale, attach two
+      datasets to it, and then unattach them, you get an error if they are
+      unattached in order, but no error if you unattach them in reverse order.
       (SB - 2011/06/07 - HDFFV-7605)
 
     Fortran High-Level APIs:
@@ -7422,7 +7422,7 @@ The following platforms and compilers have been tested for this release.
 
     Linux 2.6.16.60-0.54.5-smp    Intel(R) C, C++, Fortran Compilers
     x86_64                            Version 11.1 20090630
-    (INL Icestorm)                   
+    (INL Icestorm)
 
     Linux 2.6.18-194.el5 x86_64   Intel(R) C, C++, Fortran Compilers
     (INL Fission)                     Version 12.0.2 20110112
@@ -7432,11 +7432,11 @@ The following platforms and compilers have been tested for this release.
 
     Linux 2.6.18-194.3.1.el5PAE   gcc (GCC) 4.1.2 and 4.4.2
     #1 SMP i686 i686 i386         GNU Fortran (GCC) 4.1.2 20080704
-    (jam)                             (Red Hat 4.1.2-48) and 4.4.2 
+    (jam)                             (Red Hat 4.1.2-48) and 4.4.2
                                   PGI C, Fortran, C++ 10.4-0 32-bit
                                   PGI C, Fortran, C++ 10.6-0 32-bit
                                   Intel(R) C Compiler for 32-bit
-                                      applications, Version 11.1 
+                                      applications, Version 11.1
                                   Intel(R) C++ Compiler for 32-bit
                                       applications, Version 11.1
                                   Intel(R) Fortran Compiler for 32-bit
@@ -7448,8 +7448,8 @@ The following platforms and compilers have been tested for this release.
     #1 SMP x86_64 GNU/Linux       GNU Fortran (GCC) 4.1.2 20080704
     (koala)                           (Red Hat 4.1.2-46) and 4.4.2
                                       tested for both 32- and 64-bit binaries
-                                  Intel(R) C, C++, Fortran Compilers for 
-                                      applications running on Intel(R) 64, 
+                                  Intel(R) C, C++, Fortran Compilers for
+                                      applications running on Intel(R) 64,
                                       Version 11.1.
                                   PGI C, Fortran, C++ Version 9.0-4
                                       for 64-bit target on x86-64
@@ -7459,7 +7459,7 @@ The following platforms and compilers have been tested for this release.
     SGI Altix UV                  Intel(R) C, Fortran Compilers
     SGI ProPack 7 Linux               Version 11.1 20100806
     2.6.32.24-0.2.1.2230.2.PTF-   SGI MPT 2.02
-    default #1 SMP                
+    default #1 SMP
     (NCSA ember)
 
     Dell NVIDIA Cluster           Intel(R) C, Fortran Compilers
@@ -7532,7 +7532,7 @@ The following platforms and compilers have been tested for this release.
     Ubuntu 11.10 3.0.0-12-generic #20-Ubuntu SMP x86_64 GNU/Linux
                                   gcc (Ubuntu/Linaro 4.6.1-9ubuntu3) 4.6.1
                                   GNU Fortran (Ubuntu/Linaro 4.6.1-9ubuntu3) 4.6.1
-    
+
     OpenVMS Alpha 8.3             HP C V7.3-009
                                   HP Fortran V8.2-104679-48H9K
                                   HP C++ V7.3-009
@@ -7546,14 +7546,14 @@ Tested Configuration Features Summary
 =====================================
 
     In the tables below
-          y   = tested 
+          y   = tested
           n   = not tested in this release
           C   = Cluster
           W   = Workstation
           x   = not working in this release
           dna = does not apply
           ( ) = footnote appears below second table
-          <blank> = testing incomplete on this feature or platform 
+          <blank> = testing incomplete on this feature or platform
 
 Platform                                 C        F90    F90      C++   zlib  SZIP
                                          parallel        parallel
@@ -7577,31 +7577,31 @@ CentOS 5.5 Linux 2.6.16 x86_64 PGI      W  n        y      n        y     y    y
 Fedora 12 Linux 2.6.32.16-150.fc12.ppc64   n        y      n        y     y    y
 SGI ProPack 7 Linux 2.6.32.24              y        y      y        y     y    y
 Red Hat Enterprise Linux 6                 y        y      y        y     y    y
-CLE hopper.nersc.gov                       y        y(3)   y        y     y    n  
-CLE franklin.nersc.gov                     y        y(3)   y        y     y    n  
+CLE hopper.nersc.gov                       y        y(3)   y        y     y    n
+CLE franklin.nersc.gov                     y        y(3)   y        y     y    n
 
 
-Platform                                 Shared  Shared    Shared    Thread-  
-                                         C libs  F90 libs  C++ libs  safe     
-Solaris2.10 32-bit                         y       y         y         y        
-Solaris2.10 64-bit                         y       y         y         y        
-Windows XP                                 y       y(4)      y         n        
-Windows XP x64                             y       y(4)      y         n        
+Platform                                 Shared  Shared    Shared    Thread-
+                                         C libs  F90 libs  C++ libs  safe
+Solaris2.10 32-bit                         y       y         y         y
+Solaris2.10 64-bit                         y       y         y         y
+Windows XP                                 y       y(4)      y         n
+Windows XP x64                             y       y(4)      y         n
 Windows Vista                              y       y(4)      y         y
 Windows Vista x64                          y       y(4)      y         y
 OpenVMS Alpha                              n       n         n         n
-Mac OS X 10.8 Intel 32-bit                 y(5)    n         y         n        
-Mac OS X 10.8 Intel 64-bit                 y(5)    n         y         n        
-AIX 5.3 32- and 64-bit                     n       n         n         y        
-FreeBSD 8.2-STABLE 32&64 bit               y       x         x         y        
-CentOS 5.5 Linux 2.6.18-128 i686 GNU (1)W  y       y(2)      y         y        
-CentOS 5.5 Linux 2.6.18-128 i686 Intel  W  y       y         y         n        
-CentOS 5.5 Linux 2.6.18-128 i686 PGI    W  y       y         y         n        
-CentOS 5.5 Linux 2.6.16 x86_64 GNU (1)  W  y       y         y         y        
-CentOS 5.5 Linux 2.6.16 x86_64 Intel    W  y       y         y         n        
-CentOS 5.5 Linux 2.6.16 x86_64 PGI      W  y       y         y         n        
-Fedora 12 Linux 2.6.32.16-150.fc12.ppc64   y       y         y         y 
-SGI ProPack 7 Linux 2.6.32.24              y       y         y         n 
+Mac OS X 10.8 Intel 32-bit                 y(5)    n         y         n
+Mac OS X 10.8 Intel 64-bit                 y(5)    n         y         n
+AIX 5.3 32- and 64-bit                     n       n         n         y
+FreeBSD 8.2-STABLE 32&64 bit               y       x         x         y
+CentOS 5.5 Linux 2.6.18-128 i686 GNU (1)W  y       y(2)      y         y
+CentOS 5.5 Linux 2.6.18-128 i686 Intel  W  y       y         y         n
+CentOS 5.5 Linux 2.6.18-128 i686 PGI    W  y       y         y         n
+CentOS 5.5 Linux 2.6.16 x86_64 GNU (1)  W  y       y         y         y
+CentOS 5.5 Linux 2.6.16 x86_64 Intel    W  y       y         y         n
+CentOS 5.5 Linux 2.6.16 x86_64 PGI      W  y       y         y         n
+Fedora 12 Linux 2.6.32.16-150.fc12.ppc64   y       y         y         y
+SGI ProPack 7 Linux 2.6.32.24              y       y         y         n
 Red Hat Enterprise Linux 6                 y       y         y         n
 CLE hopper.nersc.gov                       n       n         n         n
 CLE franklin.nersc.gov                     n       n         n         n
@@ -7638,7 +7638,7 @@ Known Problems
   that "make prefix=XXX install" no longer works for shared libraries. It
   still works correctly for static libraries. Therefore, if you want to
   install the HDF5 shared libraries in a location such as /usr/local/hdf5,
-  you need to specify the location via the --prefix option during configure 
+  you need to specify the location via the --prefix option during configure
   time. E.g, ./configure --prefix=/usr/local/hdf5 ...
   (AKC - 2011/05/07 - HDFFV-7583)
 
@@ -7646,8 +7646,8 @@ Known Problems
   be terminated by the alarm signal.  If that happens, one can increase the
   alarm seconds (default is 1200 seconds = 20 minutes) by setting the
   environment variable, $HDF5_ALARM_SECONDS, to a larger value such as 3600
-  (60 minutes).  Note that the t_shapesame test may fail in some systems 
-  (see the "While working on the 1.8.6 release..." problem below).  If 
+  (60 minutes).  Note that the t_shapesame test may fail in some systems
+  (see the "While working on the 1.8.6 release..." problem below).  If
   it does, it will waste more time if $HDF5_ALARM_SECONDS is set
   to a larger value. (AKC - 2011/05/07)
 
@@ -7675,7 +7675,7 @@ Known Problems
   (NAF - 2011/01/19)
 
 * The library's test dt_arith.c showed a compiler's rounding problem on
-  Cygwin when converting from unsigned long long to long double.  The 
+  Cygwin when converting from unsigned long long to long double.  The
   library's own conversion works fine.  We defined a macro for Cygwin to
   skip this test until we can solve the problem.
   (SLU - 2010/05/05 - HDFFV-1264)
@@ -7685,8 +7685,8 @@ Known Problems
   get_eoa and set_eoa callback functions.  A new callback function
   get_type_map was added in.  The public function H5FDrealloc was taken
   out in 1.8.  The problem only happens when users define their own driver
-  for 1.6 and try to plug in 1.8 library.  Because there's only one user 
-  complaining about it, we (Elena, Quincey, and I) decided to leave it as 
+  for 1.6 and try to plug in 1.8 library.  Because there's only one user
+  complaining about it, we (Elena, Quincey, and I) decided to leave it as
   it is (see bug report #1279).  Quincey will make a plan for 1.10.
   (SLU - 2010/02/02)
 
@@ -7697,17 +7697,17 @@ Known Problems
 * The --enable-static-exec configure flag will only statically link libraries
   if the static version of that library is present. If only the shared version
   of a library exists (i.e., most system libraries on Solaris, AIX, and Mac,
-  for example, only have shared versions), the flag should still result in a 
-  successful compilation, but note that the installed executables will not be 
-  fully static. Thus, the only guarantee on these systems is that the 
+  for example, only have shared versions), the flag should still result in a
+  successful compilation, but note that the installed executables will not be
+  fully static. Thus, the only guarantee on these systems is that the
   executable is statically linked with just the HDF5 library.
   (MAM - 2009/11/04)
-  
+
 * The PathScale MPI implementation, accessing a Panasas file system, would
   cause H5Fcreate() with H5F_ACC_EXCL to fail even when the file does not
   exist. This is due to the MPI_File_open() call failing if the mode has
   the MPI_MODE_EXCL bit set. (AKC - 2009/08/11 - HDFFV-988)
- 
+
 * Parallel tests failed with 16 processes with data inconsistency at testphdf5
   / dataset_readAll. Parallel tests also failed with 32 and 64 processes with
   collective abort of all ranks at t_posix_compliant / allwrite_allread_blocks
@@ -7742,30 +7742,30 @@ Known Problems
   echo SKIP H5LSTEST $FILEOUT
   ==================================================
   (AKC - 2008/11/10)
-  
+
 * For Red Storm, a Cray XT3 system, the yod command sometimes gives the
   message,  "yod allocation delayed for node recovery".  This interferes with
   test suites that do not expect to see this message.  See the section of "Red
   Storm" in file INSTALL_parallel for a way to deal with this problem.
   (AKC - 2008/05/28)
 
-* On an Intel 64 Linux cluster (RH 4, Linux 2.6.9) with Intel 10.0 compilers, 
-  use -mp -O1 compilation flags to build the libraries. A higher level of 
-  optimization causes failures in several HDF5 library tests. 
+* On an Intel 64 Linux cluster (RH 4, Linux 2.6.9) with Intel 10.0 compilers,
+  use -mp -O1 compilation flags to build the libraries. A higher level of
+  optimization causes failures in several HDF5 library tests.
 
-* On mpich 1.2.5 and 1.2.6, if more than two processes contribute no IO and 
-  the application asks to do collective IO, we have found that when using 4 
-  processors, a simple collective write will sometimes be hung. This can be 
+* On mpich 1.2.5 and 1.2.6, if more than two processes contribute no IO and
+  the application asks to do collective IO, we have found that when using 4
+  processors, a simple collective write will sometimes be hung. This can be
   verified with t_mpi test under testpar.
 
-* A dataset created or rewritten with a v1.6.3 library or after cannot be read 
+* A dataset created or rewritten with a v1.6.3 library or after cannot be read
   with the v1.6.2 library or before when the Fletcher32 EDC filter is enabled.
-  There was a bug in the calculation of the Fletcher32 checksum in the 
+  There was a bug in the calculation of the Fletcher32 checksum in the
   library before v1.6.3; the checksum value was not consistent between big-
-  endian and little-endian systems.  This bug was fixed in Release 1.6.3.  
-  However, after fixing the bug, the checksum value was no longer the same as 
-  before on little-endian system.  Library releases after 1.6.4 can still read 
-  datasets created or rewritten with an HDF5 library of v1.6.2 or before.  
+  endian and little-endian systems.  This bug was fixed in Release 1.6.3.
+  However, after fixing the bug, the checksum value was no longer the same as
+  before on little-endian system.  Library releases after 1.6.4 can still read
+  datasets created or rewritten with an HDF5 library of v1.6.2 or before.
   (SLU - 2005/06/30)
 
 * On IBM AIX systems, parallel HDF5 mode will fail some tests with error
@@ -7773,17 +7773,17 @@ Known Problems
   Set the environment variable MP_INFOLEVEL to 0 to minimize the messages
   and run the tests again.
 
-  The tests may fail with messages like "The socket name is already in use",  
-  but HDF5 does not use sockets.  This failure is due to problems with the 
-  poe command trying to set up the debug socket.  To resolve this problem, 
-  check to see whether there are many old /tmp/s.pedb.* files staying around.  
-  These are sockets used by the poe command and left behind due to failed 
-  commands.  First, ask your system administrator to clean them out.  
+  The tests may fail with messages like "The socket name is already in use",
+  but HDF5 does not use sockets.  This failure is due to problems with the
+  poe command trying to set up the debug socket.  To resolve this problem,
+  check to see whether there are many old /tmp/s.pedb.* files staying around.
+  These are sockets used by the poe command and left behind due to failed
+  commands.  First, ask your system administrator to clean them out.
   Lastly, request IBM to provide a means to run poe without the debug socket.
   (AKC - 2004/12/08)
 
 
-%%%%1.8.7%%%%   
+%%%%1.8.7%%%%
 
 
 HDF5 version 1.8.7 released on Tue May 10 09:24:44 CDT 2011
@@ -7792,10 +7792,10 @@ HDF5 version 1.8.7 released on Tue May 10 09:24:44 CDT 2011
 INTRODUCTION
 ============
 
-This document describes the differences between HDF5-1.8.6 and 
-HDF5 1.8.7, and contains information on the platforms tested and 
-known problems in HDF5-1.8.7. 
-For more details, see the files HISTORY-1_0-1_8_0_rc3.txt 
+This document describes the differences between HDF5-1.8.6 and
+HDF5 1.8.7, and contains information on the platforms tested and
+known problems in HDF5-1.8.7.
+For more details, see the files HISTORY-1_0-1_8_0_rc3.txt
 and HISTORY-1_8.txt in the release_docs/ directory of the HDF5 source.
 
 Links to the HDF5 1.8.7 source code, documentation, and additional materials
@@ -7807,18 +7807,18 @@ The HDF5 1.8.7 release can be obtained from:
 
      http://www.hdfgroup.org/HDF5/release/obtain5.html
 
-User documentation for 1.8.7 can be accessed directly at this location: 
+User documentation for 1.8.7 can be accessed directly at this location:
 
      http://www.hdfgroup.org/HDF5/doc/
 
-New features in the HDF5-1.8.x release series, including brief general 
-descriptions of some new and modified APIs, are described in the "What's New 
+New features in the HDF5-1.8.x release series, including brief general
+descriptions of some new and modified APIs, are described in the "What's New
 in 1.8.0?" document:
 
      http://www.hdfgroup.org/HDF5/doc/ADGuide/WhatsNew180.html
 
-All new and modified APIs are listed in detail in the "HDF5 Software Changes 
-from Release to Release" document, in the section "Release 1.8.7 (current 
+All new and modified APIs are listed in detail in the "HDF5 Software Changes
+from Release to Release" document, in the section "Release 1.8.7 (current
 release) versus Release 1.8.6":
 
      http://www.hdfgroup.org/HDF5/doc/ADGuide/Changes.html
@@ -7856,50 +7856,50 @@ New Features
     - Added a new configure option, "--enable-unsupported", which can
       be used to stop configure from preventing the use of unsupported
       configure option combinations, such as c++ in parallel or Fortran
-      with threadsafe. Use at your own risk, as it may result in a 
+      with threadsafe. Use at your own risk, as it may result in a
       library that won't compile or run as expected!
       (MAM - 2010/11/17 - Bug 2061)
 
     Library
     -------
-    - The library allows the dimension size of a dataspace to be zero.  In 
-      the past, the library would allow this only if the maximal dimension 
-      size was unlimited. Now there is no such restriction, but no data 
+    - The library allows the dimension size of a dataspace to be zero.  In
+      the past, the library would allow this only if the maximal dimension
+      size was unlimited. Now there is no such restriction, but no data
       can be written to this kind of dataset. (SLU - 2011/4/20)
     - We added two new macros, H5_VERSION_GE and H5_VERSION_LE, to let users
       compare certain version numbers with the library being used. (SLU -
-      2011/4/20) 
+      2011/4/20)
     - Added ability to cache files opened through external links.  Added new
       public functions H5Pset_elink_file_cache_size(),
       H5Pget_elink_file_cache_size(), and H5Fclear_elink_file_cache().
       (NAF - 2011/02/17)
     - Finished implementing all options for 'log' VFD.  (QAK - 2011/1/25)
     - Removed all old code for Metrowerks compilers, bracketed by
-      __MWERKS__). Metrowerks compiler is long gone. (AKC - 2010/11/17) 
+      __MWERKS__). Metrowerks compiler is long gone. (AKC - 2010/11/17)
 
     Parallel Library
     ----------------
     - None
- 
+
     Tools
     -----
      - h5diff: Added new "verbose with levels" option, '-vN, --verbose=N'.
        The old '-v, --verbose' option is deprecated but remains available;
        it is exactly equivalent to '-v0, --verbose=0'.
-       The new levels 1 ('-v1' or '--verbose=1') and 2 ('-v2' or 
-       '--verbose=2') can be specified to view more information regarding 
+       The new levels 1 ('-v1' or '--verbose=1') and 2 ('-v2' or
+       '--verbose=2') can be specified to view more information regarding
        attributes differences.  Bug #2121 (JKM 2011/3/23)
-     - h5dump: Added new option --enable-error-stack. This option will 
-       display error stack information in the output stream. This is 
+     - h5dump: Added new option --enable-error-stack. This option will
+       display error stack information in the output stream. This is
        useful when the "h5dump: Unable to print data" message is output.
        (ADB - 2011/03/03)
 
     High-Level APIs
     ---------------
-    - Fortran LT make datasets routines (H5LTmake_dataset_f, 
-      h5ltmake_dataset_int_f, h5ltmake_dataset_float_f, h5ltmake_dataset_double_f) 
+    - Fortran LT make datasets routines (H5LTmake_dataset_f,
+      h5ltmake_dataset_int_f, h5ltmake_dataset_float_f, h5ltmake_dataset_double_f)
       and LT read datasets routines (h5ltread_dataset_f,h5ltread_dataset_int_f,
-      h5ltread_dataset_float_f, 5ltread_dataset_double_f) can now handle 
+      h5ltread_dataset_float_f, 5ltread_dataset_double_f) can now handle
       4-dimensional to 7-dimensional rank datasets. HDFFV-1217 (MSB-2011/4/24/2011)
 
     F90 API
@@ -7914,7 +7914,7 @@ New Features
 Support for New Platforms, Languages, and Compilers
 ===================================================
     - Intel V11.1 uses now -O3 optimization in production mode (EIP - 2010/10/08)
-             
+
 
 
 Bug Fixes since HDF5-1.8.6
@@ -7923,7 +7923,7 @@ Bug Fixes since HDF5-1.8.6
     Configuration
     -------------
     - Shared C++ and HL libraries on AIX should now be working correctly.
-      Note that Fortran shared libraries are still not working on AIX. 
+      Note that Fortran shared libraries are still not working on AIX.
       (See the Known Problems section, below). (MAM - 2011/4/20)
     - Removed config/ibm-aix6.x. All IBM-AIX settings are in one file,
       ibm-aix. (AKC - 2011/4/14)
@@ -7931,7 +7931,7 @@ Bug Fixes since HDF5-1.8.6
       is enabled. Shared Fortran libraries are still not supported on Mac,
       so configure will disable them by default, but this is overrideable
       with the new --enable-unsupported configure option. The configure
-      summary has been updated to reflect the fact that the shared-ness of 
+      summary has been updated to reflect the fact that the shared-ness of
       the C++/Fortran wrapper libraries may not align with the C library.
       (MAM - 2011/04/11 - HDFFV-4353).
 
@@ -7940,12 +7940,12 @@ Bug Fixes since HDF5-1.8.6
     - Changed assertion failure when decoding a compound datatype with no
       fields into a normal error failure.  Also prohibit using this sort
       of datatype for creating an attribute (as is already the case for
-      datasets and committed (named) datatypes).  (QAK - 2011/04/15, Jira 
+      datasets and committed (named) datatypes).  (QAK - 2011/04/15, Jira
       issue #HDFFV-2766)
     - Tell the VFL flush call that the file will be closing, allowing
       the VFDs to avoid sync'ing the file (particularly valuable in parallel).
       (QAK - 2011/03/09)
-    - The datatype handler created with H5Tencode/decode used to have the 
+    - The datatype handler created with H5Tencode/decode used to have the
       reference count 0 (zero); it now has the reference count 1 (one).
       (SLU - 2011/2/18)
     - Fixed the definition of H5_HAVE_GETTIMEOFDAY on Windows so that
@@ -7960,20 +7960,20 @@ Bug Fixes since HDF5-1.8.6
 
     Tools
     -----
-    - Updated h5dump test case script to prevent entire test failure when 
+    - Updated h5dump test case script to prevent entire test failure when
       source directory is read-only. Bug #HDFFV-4342 (JKM 2011/4/12)
     - Fixed h5dump displaying incorrect values for H5T_STD_I8BE type data in
       attribute on Big-Endian machine. H5T_STD_I8BE is unsigned 8bit type,
       so h5dump is supposed to display -2 instead of 254. It worked correctly
       on Little-Endian system , but not on Big-Endian system.  Bug #HDFFV-4358
       (JKM 04/08/2011)
-    - Updated some HDF5 tools to standardize the option name as 
-      '--enable-error-stack' for printing HDF5 error stack messages. h5ls and 
-      h5dump have been updated. For h5ls, this replaces "-e/--errors" option, 
-      which is deprecated. For h5dump, this is a new option. Bug #2182 
+    - Updated some HDF5 tools to standardize the option name as
+      '--enable-error-stack' for printing HDF5 error stack messages. h5ls and
+      h5dump have been updated. For h5ls, this replaces "-e/--errors" option,
+      which is deprecated. For h5dump, this is a new option. Bug #2182
       (JKM 2011/3/30)
-    - Fixed the h5diff --use-system-epsilon option. The formula used in the 
-      calculation was changed from ( |a - b| / b ) to ( |a - b| ). 
+    - Fixed the h5diff --use-system-epsilon option. The formula used in the
+      calculation was changed from ( |a - b| / b ) to ( |a - b| ).
       This was done to improve performance. Bug #2184 (JKM 2011/3/24)
     - Fixed output for H5T_REFERENCE in h5dump. According to the BNF document
       the output of a H5T_REFERENCE should be followed by the type;
@@ -7981,41 +7981,41 @@ Bug Fixes since HDF5-1.8.6
       <ref_type> ::= H5T_STD_REF_OBJECT | H5T_STD_REF_DSETREG
       Previously this was only displayed if the -R option was used.
       Bug #1725 (ADB 2011/3/28)
-    - Fixed two h5diff issues. 1) h5diff compared attributes correctly only 
-      when two objects had the same number of attributes and the attribute 
-      names were identical. 2) h5diff did not display useful information about 
+    - Fixed two h5diff issues. 1) h5diff compared attributes correctly only
+      when two objects had the same number of attributes and the attribute
+      names were identical. 2) h5diff did not display useful information about
       attribute differences. Bug #2121 (JKM 2011/3/17)
-    - Fixed a memory leak in h5diff that occurred when accessing symbolic links 
+    - Fixed a memory leak in h5diff that occurred when accessing symbolic links
       with the --follow-symlink option. Bug #2214  (JKM 2011/3/18)
-    - Fixed a memory leak in h5diff that occurred when accessing variable length 
+    - Fixed a memory leak in h5diff that occurred when accessing variable length
       string data. Bug #2216 (JKM 2011/3/18)
-    - Fixed and improved the help page for h5ls -a, --address option. 
+    - Fixed and improved the help page for h5ls -a, --address option.
       Bug #1904 (JKM 2011/3/11)
     - Fixed h5copy to enable copying an object into the same HDF5 file.
-      Previously h5copy displayed an error message when the target file 
+      Previously h5copy displayed an error message when the target file
       was the same as the source file. (XCAO 2011/3/8)
-    - Fixed an h5dump problem that caused the tool to skip some data elements 
-      in large datasets with a large array datatype on Windows. This issue 
-      arose only on Windows due to the different return behavior of the 
+    - Fixed an h5dump problem that caused the tool to skip some data elements
+      in large datasets with a large array datatype on Windows. This issue
+      arose only on Windows due to the different return behavior of the
       _vsnprintf() function.  Bug #2161 (JKM 2011/3/3)
-    - Fixed h5dump which was skipping some array indices in large datasets 
+    - Fixed h5dump which was skipping some array indices in large datasets
       with a relatively large array datatype. The interval of skipped indices
       varied according to the size of the array. Bug #2092 (JKM 2011/2/15)
     - Fixed h5diff which was segfaulting when comparing compound datasets
       with a combination of fixed-length string datatypes and variable-length
       string datatypes in certain orders. Bug #2089 (JKM 2010/12/28)
-    - Improved h5diff performance. 1) Now use HDmemcmp() before comparing two 
+    - Improved h5diff performance. 1) Now use HDmemcmp() before comparing two
       elements. 2) Replace expensive H5Tequals() calls. 3) Retrieve datatype
-      information at dataset level, not at each element level for compound 
-      datasets. HDFFV-7516 (JKM 2011/4/18) 
-    - Fixed h5ls to display nested compound types with curly brackets 
-      when -S (--simple) option is used with -l (--label), so it shows  
-      which members (in curly brackets) belong to which nested compound type, 
+      information at dataset level, not at each element level for compound
+      datasets. HDFFV-7516 (JKM 2011/4/18)
+    - Fixed h5ls to display nested compound types with curly brackets
+      when -S (--simple) option is used with -l (--label), so it shows
+      which members (in curly brackets) belong to which nested compound type,
       making the output clearer.  Bug #1979 (JKM 2010/11/09)
-    - Fixed h5diff to handle variable-length strings in a compound dataset 
+    - Fixed h5diff to handle variable-length strings in a compound dataset
       and variable-length string arrays in a compound dataset correctly.
-      Garbage values were previously displayed when h5diff compared multiple 
-      variable-length strings in a compound type dataset. 
+      Garbage values were previously displayed when h5diff compared multiple
+      variable-length strings in a compound type dataset.
       Bug #1989 (JKM 2010/10/28)
     - Fixed h5copy to fail gracefully when copying an object to a non-
       existing group without the -p option. Bug #2040 (JKM 2010/10/18)
@@ -8034,10 +8034,10 @@ Bug Fixes since HDF5-1.8.6
 
     Fortran High-Level APIs:
     ------
-    -  h5tbmake_table_f: Fixed error in passing an array of characters with different 
+    -  h5tbmake_table_f: Fixed error in passing an array of characters with different
        length field names.
-    -  h5tget_field_info_f: Fixed error with packing the C strings into a Fortran 
-       array of strings. Added optional argument called 'maxlen_out' which returns 
+    -  h5tget_field_info_f: Fixed error with packing the C strings into a Fortran
+       array of strings. Added optional argument called 'maxlen_out' which returns
        the maximum string character length in a field name element.
        Bug HDFFV-1255 (MSB- 4/17/2011)
 
@@ -8068,12 +8068,12 @@ The following platforms and compilers have been tested for this release.
 
     Linux 2.6.18-194.3.1.el5PAE   gcc (GCC) 4.1.2 and 4.4.2
     #1 SMP i686 i686 i386         G95 (GCC 4.0.3 (g95 0.93!) Apr 21 2010)
-    (jam)                         GNU Fortran (GCC) 4.1.2 20080704 
+    (jam)                         GNU Fortran (GCC) 4.1.2 20080704
                                       (Red Hat 4.1.2-48) and 4.4.2
                                   PGI C, Fortran, C++ 10.4-0 32-bit
                                   PGI C, Fortran, C++ 10.6-0 32-bit
                                   Intel(R) C Compiler for 32-bit
-                                      applications, Version 11.1 
+                                      applications, Version 11.1
                                   Intel(R) C++ Compiler for 32-bit
                                       applications, Version 11.1
                                   Intel(R) Fortran Compiler for 32-bit
@@ -8087,8 +8087,8 @@ The following platforms and compilers have been tested for this release.
     (amani)                           tested for both 32- and 64-bit binaries
                                   GNU Fortran (GCC) 4.1.2 20080704
                                       (Red Hat 4.1.2-46) and 4.4.2
-                                  Intel(R) C, C++, Fortran Compilers for 
-                                      applications running on Intel(R) 64, 
+                                  Intel(R) C, C++, Fortran Compilers for
+                                      applications running on Intel(R) 64,
                                       Version 11.1.
                                   PGI C, Fortran, C++ Version 9.0-4
                                       for 64-bit target on x86-64
@@ -8137,7 +8137,7 @@ The following platforms and compilers have been tested for this release.
                                   Intel C, C++ and Fortran compilers 12.0.1.122 20101110
 
     Mac OS X 10.7.0 (Intel 32-bit) i686-apple-darwin10-gcc-4.2.1 (GCC) 4.2.1 (Apple Inc. build 5666) (dot 3)
-    Darwin Kernel Version 10.7.0  GNU Fortran (GCC) version 4.4.0 20090123 (experimental) 
+    Darwin Kernel Version 10.7.0  GNU Fortran (GCC) version 4.4.0 20090123 (experimental)
 							[trunk revision 143587]
 
     Fedora 12 2.6.32.16-150.fc12.ppc64 #1 SMP ppc64 GNU/Linux
@@ -8175,7 +8175,7 @@ The following platforms and compilers have been tested for this release.
     Ubuntu 10.10 2.6.35-28-generic #50-Ubuntu SMP x86_64 GNU/Linux
                                   gcc (Ubuntu/Linaro 4.4.4-14ubuntu5) 4.4.5
                                   GNU Fortran (Ubuntu/Linaro 4.4.4-14ubuntu5) 4.4.5
-    
+
     OpenVMS Alpha 8.3             HP C V7.3-009
                                   HP Fortran V8.2-104679-48H9K
                                   HP C++ V7.3-009
@@ -8184,14 +8184,14 @@ Tested Configuration Features Summary
 ========================================
 
     In the tables below
-          y   = tested 
+          y   = tested
           n   = not tested in this release
           C   = Cluster
           W   = Workstation
           x   = not working in this release
           dna = does not apply
           ( ) = footnote appears below second table
-          <blank> = testing incomplete on this feature or platform 
+          <blank> = testing incomplete on this feature or platform
 
 Platform                                 C        F90    F90      C++   zlib  SZIP
                                          parallel        parallel
@@ -8217,28 +8217,28 @@ Fedora 12 Linux 2.6.32.16-150.fc12.ppc64   n        y      n        y     y
 SGI Linux 2.6.32.19                        y        y      y        y     y     y
 
 
-Platform                                 Shared  Shared    Shared    Thread-  
-                                         C libs  F90 libs  C++ libs  safe     
-Solaris2.10 32-bit                         y       y         y         y        
-Solaris2.10 64-bit                         y       y         y         y        
-Windows XP                                 y       y(4)      y         n        
-Windows XP x64                             y       y(4)      y         n        
+Platform                                 Shared  Shared    Shared    Thread-
+                                         C libs  F90 libs  C++ libs  safe
+Solaris2.10 32-bit                         y       y         y         y
+Solaris2.10 64-bit                         y       y         y         y
+Windows XP                                 y       y(4)      y         n
+Windows XP x64                             y       y(4)      y         n
 Windows Vista                              y       y(4)      y         y
 Windows Vista x64                          y       y(4)      y         y
 OpenVMS Alpha                              n       n         n         n
-Mac OS X 10.7 Intel 32-bit                 y(5)    n         y         n        
-Mac OS X 10.7 Intel 64-bit                 y(5)    n         y         n        
-AIX 6.1 32- and 64-bit                     n       n         n         y        
-FreeBSD 8.2-STABLE 32&64 bit               y       x         x         y        
-CentOS 5.5 Linux 2.6.18-128 i686 GNU (1)W  y       y(2)      y         y        
-CentOS 5.5 Linux 2.6.18-128 i686 Intel  W  y       y         y         n        
-CentOS 5.5 Linux 2.6.18-128 i686 PGI    W  y       y         y         n        
-CentOS 5.5 Linux 2.6.16 x86_64 GNU (1)  W  y       y         y         y        
-CentOS 5.5 Linux 2.6.16 x86_64 Intel    W  y       y         y         n        
-CentOS 5.5 Linux 2.6.16 x86_64 PGI      W  y       y         y         n        
+Mac OS X 10.7 Intel 32-bit                 y(5)    n         y         n
+Mac OS X 10.7 Intel 64-bit                 y(5)    n         y         n
+AIX 6.1 32- and 64-bit                     n       n         n         y
+FreeBSD 8.2-STABLE 32&64 bit               y       x         x         y
+CentOS 5.5 Linux 2.6.18-128 i686 GNU (1)W  y       y(2)      y         y
+CentOS 5.5 Linux 2.6.18-128 i686 Intel  W  y       y         y         n
+CentOS 5.5 Linux 2.6.18-128 i686 PGI    W  y       y         y         n
+CentOS 5.5 Linux 2.6.16 x86_64 GNU (1)  W  y       y         y         y
+CentOS 5.5 Linux 2.6.16 x86_64 Intel    W  y       y         y         n
+CentOS 5.5 Linux 2.6.16 x86_64 PGI      W  y       y         y         n
 RedHat EL4 2.6.18 Xeon Lustre           C  y       y         y         n
-Fedora 12 Linux 2.6.32.16-150.fc12.ppc64   y       y         y         y 
-SGI Linux 2.6.32.19                        y       y         y         y 
+Fedora 12 Linux 2.6.32.16-150.fc12.ppc64   y       y         y         y
+SGI Linux 2.6.32.19                        y       y         y         y
 
            (1) Fortran compiled with gfortran.
            (2) With PGI and Absoft compilers.
@@ -8255,7 +8255,7 @@ Known Problems
   that "make prefix=XXX install" no longer works for shared libraries. It
   still works correctly for static libraries. Therefore, if you want to
   install the HDF5 shared libraries in a location such as /usr/local/hdf5,
-  you need to specify the location via the --prefix option during configure 
+  you need to specify the location via the --prefix option during configure
   time. E.g, ./configure --prefix=/usr/local/hdf5 ...
   (AKC - 2011/05/07 HDFFV-7583)
 
@@ -8263,8 +8263,8 @@ Known Problems
   be terminated by the alarm signal.  If that happens, one can increase the
   alarm seconds (default is 1200 seconds = 20 minutes) by setting the
   environment variable, $HDF5_ALARM_SECONDS, to a larger value such as 3600
-  (60 minutes).  Note that the t_shapesame test may fail in some systems 
-  (see the "While working on the 1.8.6 release..." problem below).  If 
+  (60 minutes).  Note that the t_shapesame test may fail in some systems
+  (see the "While working on the 1.8.6 release..." problem below).  If
   it does, it will waste more time if $HDF5_ALARM_SECONDS is set
   to a larger value. (AKC - 2011/05/07)
 
@@ -8297,30 +8297,30 @@ Known Problems
   http://www.hdfgroup.org/ftp/HDF5/examples/known_problems/
 
 * The library's test dt_arith.c showed a compiler's rounding problem on
-  Cygwin when converting from unsigned long long to long double.  The 
+  Cygwin when converting from unsigned long long to long double.  The
   library's own conversion works fine.  We defined a macro for Cygwin to
   skip this test until we can solve the problem.  Please see bug #1813.
-  SLU - 2010/5/5 
+  SLU - 2010/5/5
 
 * All the VFL drivers aren't backward compatible.  In H5FDpublic.h, the
   structure H5FD_class_t changed in 1.8.  There is new parameter added to
   get_eoa and set_eoa callback functions.  A new callback function
   get_type_map was added in.  The public function H5FDrealloc was taken
   out in 1.8.  The problem only happens when users define their own driver
-  for 1.6 and try to plug in 1.8 library.  Because there's only one user 
-  complaining about it, we (Elena, Quincey, and I) decided to leave it as 
+  for 1.6 and try to plug in 1.8 library.  Because there's only one user
+  complaining about it, we (Elena, Quincey, and I) decided to leave it as
   it is (see bug report #1279).  Quincey will make a plan for 1.10.
   SLU - 2010/2/2
 
 * MinGW has a missing libstdc++.dll.a library file and will not successfully link
   C++ applications/tests. Do not use the enable-cxx configure option. Read all of
   the INSTALL_MINGW.txt file for all restrictions. ADB - 2009/11/11
-  
+
 * The PathScale MPI implementation, accessing a Panasas file system, would
   cause H5Fcreate() with H5F_ACC_EXCL to fail even when the file does not
   exist. This is due to the MPI_File_open() call failing if the mode has
   the MPI_MODE_EXCL bit set. (See bug 1468 for details.) AKC - 2009/8/11
- 
+
 * Parallel tests failed with 16 processes with data inconsistency at testphdf5
   / dataset_readAll. Parallel tests also failed with 32 and 64 processes with
   collective abort of all ranks at t_posix_compliant / allwrite_allread_blocks
@@ -8362,23 +8362,23 @@ Known Problems
   Storm" in file INSTALL_parallel for a way to deal with this problem.
   AKC - 2008/05/28
 
-* On an Intel 64 Linux cluster (RH 4, Linux 2.6.9) with Intel 10.0 compilers, 
-  use -mp -O1 compilation flags to build the libraries. A higher level of 
-  optimization causes failures in several HDF5 library tests. 
+* On an Intel 64 Linux cluster (RH 4, Linux 2.6.9) with Intel 10.0 compilers,
+  use -mp -O1 compilation flags to build the libraries. A higher level of
+  optimization causes failures in several HDF5 library tests.
 
-* On mpich 1.2.5 and 1.2.6, if more than two processes contribute no IO and 
-  the application asks to do collective IO, we have found that when using 4 
-  processors, a simple collective write will sometimes be hung. This can be 
+* On mpich 1.2.5 and 1.2.6, if more than two processes contribute no IO and
+  the application asks to do collective IO, we have found that when using 4
+  processors, a simple collective write will sometimes be hung. This can be
   verified with t_mpi test under testpar.
 
-* A dataset created or rewritten with a v1.6.3 library or after cannot be read 
+* A dataset created or rewritten with a v1.6.3 library or after cannot be read
   with the v1.6.2 library or before when the Fletcher32 EDC filter is enabled.
-  There was a bug in the calculation of the Fletcher32 checksum in the 
+  There was a bug in the calculation of the Fletcher32 checksum in the
   library before v1.6.3; the checksum value was not consistent between big-
-  endian and little-endian systems.  This bug was fixed in Release 1.6.3.  
-  However, after fixing the bug, the checksum value was no longer the same as 
-  before on little-endian system.  Library releases after 1.6.4 can still read 
-  datasets created or rewritten with an HDF5 library of v1.6.2 or before.  
+  endian and little-endian systems.  This bug was fixed in Release 1.6.3.
+  However, after fixing the bug, the checksum value was no longer the same as
+  before on little-endian system.  Library releases after 1.6.4 can still read
+  datasets created or rewritten with an HDF5 library of v1.6.2 or before.
   SLU - 2005/6/30
 
 * On IBM AIX systems, parallel HDF5 mode will fail some tests with error
@@ -8386,23 +8386,23 @@ Known Problems
   Set the environment variable MP_INFOLEVEL to 0 to minimize the messages
   and run the tests again.
 
-  The tests may fail with messages like "The socket name is already in use",  
-  but HDF5 does not use sockets.  This failure is due to problems with the 
-  poe command trying to set up the debug socket.  To resolve this problem, 
-  check to see whether there are many old /tmp/s.pedb.* files staying around.  
-  These are sockets used by the poe command and left behind due to failed 
-  commands.  First, ask your system administrator to clean them out.  
+  The tests may fail with messages like "The socket name is already in use",
+  but HDF5 does not use sockets.  This failure is due to problems with the
+  poe command trying to set up the debug socket.  To resolve this problem,
+  check to see whether there are many old /tmp/s.pedb.* files staying around.
+  These are sockets used by the poe command and left behind due to failed
+  commands.  First, ask your system administrator to clean them out.
   Lastly, request IBM to provide a means to run poe without the debug socket.
 
 * The --enable-static-exec configure flag will only statically link libraries
   if the static version of that library is present. If only the shared version
   of a library exists (i.e., most system libraries on Solaris, AIX, and Mac,
-  for example, only have shared versions), the flag should still result in a 
-  successful compilation, but note that the installed executables will not be 
-  fully static. Thus, the only guarantee on these systems is that the 
+  for example, only have shared versions), the flag should still result in a
+  successful compilation, but note that the installed executables will not be
+  fully static. Thus, the only guarantee on these systems is that the
   executable is statically linked with just the HDF5 library.
 
-* There is also a configure error on Altix machines that incorrectly reports 
+* There is also a configure error on Altix machines that incorrectly reports
   when a version of Szip without an encoder is being used.
 
 * On cobalt, an SGI Altix SMP ia64 system, Intel compiler version 10.1 (which
@@ -8418,7 +8418,7 @@ Known Problems
   and it will be fixed in 1.8.8. DER - 2011/04/27
 
 
-%%%%1.8.6%%%%   
+%%%%1.8.6%%%%
 
 
 HDF5 version 1.8.6 released on Mon Feb 14 10:26:30 CST 2011
@@ -8427,10 +8427,10 @@ HDF5 version 1.8.6 released on Mon Feb 14 10:26:30 CST 2011
 INTRODUCTION
 ============
 
-This document describes the differences between HDF5-1.8.5 and 
-HDF5 1.8.6, and contains information on the platforms tested and 
-known problems in HDF5-1.8.6. 
-For more details, see the files HISTORY-1_0-1_8_0_rc3.txt 
+This document describes the differences between HDF5-1.8.5 and
+HDF5 1.8.6, and contains information on the platforms tested and
+known problems in HDF5-1.8.6.
+For more details, see the files HISTORY-1_0-1_8_0_rc3.txt
 and HISTORY-1_8.txt in the release_docs/ directory of the HDF5 source.
 
 Links to the HDF5 1.8.6 source code, documentation, and additional materials
@@ -8442,18 +8442,18 @@ The HDF5 1.8.6 release can be obtained from:
 
      http://www.hdfgroup.org/HDF5/release/obtain5.html
 
-User documentation for 1.8.6 can be accessed directly at this location: 
+User documentation for 1.8.6 can be accessed directly at this location:
 
      http://www.hdfgroup.org/HDF5/doc/
 
-New features in the HDF5-1.8.x release series, including brief general 
-descriptions of some new and modified APIs, are described in the "What's New 
+New features in the HDF5-1.8.x release series, including brief general
+descriptions of some new and modified APIs, are described in the "What's New
 in 1.8.0?" document:
 
      http://www.hdfgroup.org/HDF5/doc/ADGuide/WhatsNew180.html
 
-All new and modified APIs are listed in detail in the "HDF5 Software Changes 
-from Release to Release" document, in the section "Release 1.8.6 (current 
+All new and modified APIs are listed in detail in the "HDF5 Software Changes
+from Release to Release" document, in the section "Release 1.8.6 (current
 release) versus Release 1.8.5":
 
      http://www.hdfgroup.org/HDF5/doc/ADGuide/Changes.html
@@ -8481,43 +8481,43 @@ New Features
     -------------
     - CMake: Improved CPack packaging, added parallel commands, improved
       configuration options (better similarity to configure), added more
-      tests, better support for use in external cmake projects. 
+      tests, better support for use in external cmake projects.
       (ADB - 2010/10/07)
-    - The default configuration setting for official releases is 
-      --enable-production. For unofficial releases, the default configuration 
+    - The default configuration setting for official releases is
+      --enable-production. For unofficial releases, the default configuration
       setting has been --disable-production. (AKC  - 2010/05/28)
     Library
     -------
-    - Added support for thread safety on Windows using the Windows threads 
-      library. Use the HDF5_ENABLE_THREADSAFE option in CMake on a Windows 
-      platform to enable this functionality. This is supported on Windows 
+    - Added support for thread safety on Windows using the Windows threads
+      library. Use the HDF5_ENABLE_THREADSAFE option in CMake on a Windows
+      platform to enable this functionality. This is supported on Windows
       Vista and newer Windows operating systems. (MAM - 2010/09/10)
-    - H5Tset_order and H5Tget_order now support all datatypes.  A new byte 
-      order, H5T_ORDER_MIXED, has been added specifically for a compound 
-      datatype and its derived type.  (SLU - 2010/8/23) 
-    - Improved performance of metadata I/O by changing the default algorithm 
-      to perform I/O from all processes (instead of just process 0) when using 
+    - H5Tset_order and H5Tget_order now support all datatypes.  A new byte
+      order, H5T_ORDER_MIXED, has been added specifically for a compound
+      datatype and its derived type.  (SLU - 2010/8/23)
+    - Improved performance of metadata I/O by changing the default algorithm
+      to perform I/O from all processes (instead of just process 0) when using
       parallel I/O drivers. (QAK - 2010/07/19)
-    - Improved performance of I/O on datasets with the same shape, but 
+    - Improved performance of I/O on datasets with the same shape, but
       different rank. (QAK - 2010/07/19)
-    - Improved performance of the chunk cache by avoiding unnecessary b-tree 
-      lookups of chunks already in cache. (NAF - 2010/06/15) 
-      
+    - Improved performance of the chunk cache by avoiding unnecessary b-tree
+      lookups of chunks already in cache. (NAF - 2010/06/15)
+
     Parallel Library
     ----------------
     - None
- 
+
     Tools
     -----
-    - h5diff: Added a new flag: --exclude-path.  The specified path to an 
-      object will be excluded when comparing two files or two groups. If a 
-      group is specified to be excluded, all member objects of that group 
+    - h5diff: Added a new flag: --exclude-path.  The specified path to an
+      object will be excluded when comparing two files or two groups. If a
+      group is specified to be excluded, all member objects of that group
       will be excluded.  (JKM - 2010/09/16).
-    - h5ls: Added a new flag: --no-dangling-links.  See --help output for 
+    - h5ls: Added a new flag: --no-dangling-links.  See --help output for
       details. (JKM - 2010/06/15)
-    - h5ls: Added a new flag --follow-symlinks.  See --help output for 
+    - h5ls: Added a new flag --follow-symlinks.  See --help output for
       details. (JKM - 2010/05/25)
-      
+
     High-Level APIs
     ---------------
     - None
@@ -8542,9 +8542,9 @@ Bug Fixes since HDF5-1.8.5
 
     Configuration
     -------------
-    - The default number of MPI processes for testing purposes has been 
+    - The default number of MPI processes for testing purposes has been
       changed from 3 to 6.  (AKC - 2010/11/11)
-    - Some tests in tools/h5repack may fail in AIX systems when -q32 mode is 
+    - Some tests in tools/h5repack may fail in AIX systems when -q32 mode is
       used. The error is caused by not requesting enough memory in default.
       Added "env LDR_CNTRL=MAXDATA=0x20000000@DSA" into the $RUNSERIAL and
       $RUNPARALLE in the AIX config file so that executables are tested with
@@ -8552,10 +8552,10 @@ Bug Fixes since HDF5-1.8.5
     - Removed recognition of the parallel compilers of LAM(hcc) and
       ChMPIon(cmpicc) since we have no access to these two MPI implementations
       and cannot verify their correctness. (AKC - 2010/07/14 - Bug 1921)
-    - PHDF5 was changed to use "mpiexec" instead of mpirun as the default 
-      MPI applications startup command as defined in the MPI-2 definition, 
+    - PHDF5 was changed to use "mpiexec" instead of mpirun as the default
+      MPI applications startup command as defined in the MPI-2 definition,
       section 4.1. (AKC - 2010/06/11 - Bug 1921)
-      
+
     Library
     -------
     - Fixed a bug that caused big endian machines to generate corrupt files
@@ -8563,15 +8563,15 @@ Bug Fixes since HDF5-1.8.5
       values.  Note that such datasets will no longer be readable by any
       by any machine after this patch.  (NAF - 2010/02/02 - Bug 2131)
     - Retrieving a link's name by index in the case where the link is external
-      and the file that the link refers to doesn't exist will now fail 
+      and the file that the link refers to doesn't exist will now fail
       gracefully rather than cause a segmentation fault. (MAM - 2010/11/17)
-    - Modified metadata accumulator to better track accumulated dirty metadata 
-      in an effort to reduce unnecessary I/O in certain situations and to 
+    - Modified metadata accumulator to better track accumulated dirty metadata
+      in an effort to reduce unnecessary I/O in certain situations and to
       fix some other corner cases which were prone to error. (MAM - 2010/10/15)
-    - Added a new set of unit tests that are run during 'make check' to verify 
+    - Added a new set of unit tests that are run during 'make check' to verify
       the behavior of the metadata accumulator. (MAM - 2010/10/15)
     - Modified library to always cache symbol table information.  Libraries
-      from version 1.6.3 and earler have a bug which causes them to require 
+      from version 1.6.3 and earler have a bug which causes them to require
       this information for some operations. (NAF - 2010/09/21 - Bug 1864)
     - Fixed a bug where the library could generate an assertion/core dump when
       a file that had been created with H5Pset_libver_bounds(fapl,
@@ -8585,9 +8585,9 @@ Bug Fixes since HDF5-1.8.5
       CMake to build the library. (ADB - 2010/09/13 - Bug 1938)
     - When a mandatory filter failed to write data chunks, the dataset
       couldn't close (bug 1260).  The fix releases all resources and closes
-      the dataset but returns a failure. (SLU - 2010/09/08) 
-    - H5Eset_current_stack now also closes the error stack set as the 
-      default. This is to avoid a potential problem. 
+      the dataset but returns a failure. (SLU - 2010/09/08)
+    - H5Eset_current_stack now also closes the error stack set as the
+      default. This is to avoid a potential problem.
       (SLU - 2010/09/07 - Bug 1799)
     - Corrected situation where 1-D chunked dataset could get created by an
       application without calling H5Pset_chunk().  H5Pset_chunk is now
@@ -8595,12 +8595,12 @@ Bug Fixes since HDF5-1.8.5
     - Fixed many memory issues that valgrind exposed.  (QAK - 2010/08/24)
     - Fixed the bug in the filter's public CAN_APPLY function.  The return
       value should be htri_t not herr_t. (SLU - 2010/08/05 - Bug 1239)
-    - Fixed the STDIO VFD to use fseeko64 instead of fseek64 for 64-bit I/O 
+    - Fixed the STDIO VFD to use fseeko64 instead of fseek64 for 64-bit I/O
       support. (AKC - 2010/7/30)
     - Fixed a bug in the direct I/O driver that could render files with certain
       kinds of unaligned data unreadable or corrupt them. (NAF - 2010/07/28)
-    - valgrind reported an error of copying data to itself when a new attribute 
-      is written.  Fixed by taking out the memcpy step in the attribute code. 
+    - valgrind reported an error of copying data to itself when a new attribute
+      is written.  Fixed by taking out the memcpy step in the attribute code.
       (SLU - 2010/07/28 - Bug 1956)
     - Corrected various issues in the MPI datatype creation code which could
       cause resource leaks or incorrect behavior (and may improve the
@@ -8616,23 +8616,23 @@ Bug Fixes since HDF5-1.8.5
 
     Tools
     -----
-    - Fixed h5diff to compare member objects and groups recursively when 
+    - Fixed h5diff to compare member objects and groups recursively when
       two files or groups are compared. (JKM - 2010/9/16 - Bug 1975)
     - Fixed h5repack to be able to convert a dataset to COMPACT layout.
       (JKM - 2010/09/15 - Bug 1896)
     - Changed h5ls to not interpret special characters in object or attribute
       names for output. (JKM - 2010/06/28 - Bug 1784)
-    - Revised the order of arguments for h5cc, h5fc, h5c++, h5pcc and h5pfc. 
-      CPPFLAGS, CFLAGS, LDFLAGS, and LIBS have been duplicated with an H5BLD_ 
-      prefix to put the flags and paths from the hdf5 build in the correct 
-      places and allow the script user to add entries in CPPFLAGS, CFLAGS, 
-      LDFLAGS, and LIBS that will take precedence over those from the hdf5 
-      build. The user can make these entries persistent by editing 
-      CFLAGSBASE, CPPFLAGSBASE, LDFLAGSBASE, and LIBSBASE near the top of 
-      the script or temporary by setting HDF5_CFLAGS, HDF5_CPPFLAGS, 
-      HDF5_LDFLAGS, or HDF5_LIBS in the environment. The new order of 
-      arguments in these scripts is $CLINKER $H5BLD_CPPFLAGS $CPPFLAGS 
-      $H5BLD_CFLAGS $CFLAGS $LDFLAGS $clibpath $link_objs $LIBS $link_args 
+    - Revised the order of arguments for h5cc, h5fc, h5c++, h5pcc and h5pfc.
+      CPPFLAGS, CFLAGS, LDFLAGS, and LIBS have been duplicated with an H5BLD_
+      prefix to put the flags and paths from the hdf5 build in the correct
+      places and allow the script user to add entries in CPPFLAGS, CFLAGS,
+      LDFLAGS, and LIBS that will take precedence over those from the hdf5
+      build. The user can make these entries persistent by editing
+      CFLAGSBASE, CPPFLAGSBASE, LDFLAGSBASE, and LIBSBASE near the top of
+      the script or temporary by setting HDF5_CFLAGS, HDF5_CPPFLAGS,
+      HDF5_LDFLAGS, or HDF5_LIBS in the environment. The new order of
+      arguments in these scripts is $CLINKER $H5BLD_CPPFLAGS $CPPFLAGS
+      $H5BLD_CFLAGS $CFLAGS $LDFLAGS $clibpath $link_objs $LIBS $link_args
       $shared_link. (LRK - 2010/10/25 - Bug 1973)
 
     F90 API
@@ -8676,12 +8676,12 @@ The following platforms and compilers have been tested for this release.
 
     Linux 2.6.18-194.3.1.el5PAE   gcc (GCC) 4.1.2 and 4.4.2
     #1 SMP i686 i686 i386         G95 (GCC 4.0.3 (g95 0.93!) Apr 21 2010)
-    (jam)                         GNU Fortran (GCC) 4.1.2 20080704 
+    (jam)                         GNU Fortran (GCC) 4.1.2 20080704
                                       (Red Hat 4.1.2-48) and 4.4.2
                                   PGI C, Fortran, C++ 10.4-0 32-bit
                                   PGI C, Fortran, C++ 10.6-0 32-bit
                                   Intel(R) C Compiler for 32-bit
-                                      applications, Version 11.1 
+                                      applications, Version 11.1
                                   Intel(R) C++ Compiler for 32-bit
                                       applications, Version 11.1
                                   Intel(R) Fortran Compiler for 32-bit
@@ -8695,8 +8695,8 @@ The following platforms and compilers have been tested for this release.
     (amani)                           tested for both 32- and 64-bit binaries
                                   GNU Fortran (GCC) 4.1.2 20080704
                                       (Red Hat 4.1.2-46) and 4.4.2
-                                  Intel(R) C, C++, Fortran Compilers for 
-                                      applications running on Intel(R) 64, 
+                                  Intel(R) C, C++, Fortran Compilers for
+                                      applications running on Intel(R) 64,
                                       Version 11.1.
                                   PGI C, Fortran, C++ Version 9.0-4
                                       for 64-bit target on x86-64
@@ -8743,7 +8743,7 @@ The following platforms and compilers have been tested for this release.
     Windows 7 x64                 Visual Studio 2008 w/ Intel Fortran 11.1 (cmake)
 
     Mac OS X 10.6.3 (Intel 64-bit) i686-apple-darwin10-gcc-4.2.1 (GCC) 4.2.1
-    Darwin Kernel Version 10.3.1  GNU Fortran (GCC) 4.5.0 20090910  
+    Darwin Kernel Version 10.3.1  GNU Fortran (GCC) 4.5.0 20090910
                                   Intel C, C++ and Fortran compilers 11.1 20100806
 
     Mac OS X 10.6.4 (Intel 32-bit) i686-apple-darwin10-gcc-4.2.1 (GCC) 4.2.1
@@ -8751,7 +8751,7 @@ The following platforms and compilers have been tested for this release.
                                   Intel C, C++ and Fortran compilers 12.0.0 20101110
 
     Mac OS X 10.6.4 (Intel 64-bit) i686-apple-darwin10-gcc-4.2.1 (GCC) 4.2.1 (Apple Inc. build 5659)
-    Darwin Kernel Version 10.6.0   GNU Fortran (GCC) 4.5.0 20090910 
+    Darwin Kernel Version 10.6.0   GNU Fortran (GCC) 4.5.0 20090910
                                    Intel C, C++ and Fortran compilers 11.1 20100806
 
     Fedora 12 2.6.32.16-150.fc12.ppc64 #1 SMP ppc64 GNU/Linux
@@ -8789,7 +8789,7 @@ The following platforms and compilers have been tested for this release.
     Ubuntu 10.10 2.6.35-25-generic #44-Ubuntu SMP x86_64 GNU/Linux
                                   gcc (Ubuntu/Linaro 4.4.4-14ubuntu5) 4.4.5
                                   GNU Fortran (Ubuntu/Linaro 4.4.4-14ubuntu5) 4.4.5
-    
+
     OpenVMS Alpha 8.3             HP C V7.3-009
                                   HP Fortran V8.2-104679-48H9K
                                   HP C++ V7.3-009
@@ -8798,14 +8798,14 @@ Tested Configuration Features Summary
 ========================================
 
     In the tables below
-          y   = tested 
+          y   = tested
           n   = not tested in this release
           C   = Cluster
           W   = Workstation
           x   = not working in this release
           dna = does not apply
           ( ) = footnote appears below second table
-          <blank> = testing incomplete on this feature or platform 
+          <blank> = testing incomplete on this feature or platform
 
 Platform                                 C        F90    F90      C++   zlib  SZIP
                                          parallel        parallel
@@ -8830,27 +8830,27 @@ Fedora 12 Linux 2.6.32.16-150.fc12.ppc64   n        y      n        y     y
 SGI Linux 2.6.32.19                        y        y      y        y     y     y
 
 
-Platform                                 Shared  Shared    Shared    Thread-  
-                                         C libs  F90 libs  C++ libs  safe     
-Solaris2.10 32-bit                         y       y         y         y        
-Solaris2.10 64-bit                         y       y         y         y        
-Windows XP                                 y       y(4)      y         n        
-Windows XP x64                             y       y(4)      y         n        
+Platform                                 Shared  Shared    Shared    Thread-
+                                         C libs  F90 libs  C++ libs  safe
+Solaris2.10 32-bit                         y       y         y         y
+Solaris2.10 64-bit                         y       y         y         y
+Windows XP                                 y       y(4)      y         n
+Windows XP x64                             y       y(4)      y         n
 Windows Vista                              y       y(4)      y         y
 Windows Vista x64                          y       y(4)      y         y
 OpenVMS Alpha                              n       n         n         n
-Mac OS X 10.6                              y(5)    n         y         n        
-AIX 6.1 32- and 64-bit                     n       n         n         y        
-FreeBSD 6.3-STABLE 32&64 bit               y       n         y         y        
-CentOS 5.5 Linux 2.6.18-128 i686 GNU (1)W  y       y(2)      y         y        
-CentOS 5.5 Linux 2.6.18-128 i686 Intel  W  y       y         y         n        
-CentOS 5.5 Linux 2.6.18-128 i686 PGI    W  y       y         y         n        
-CentOS 5.5 Linux 2.6.16 x86_64 GNU (1)  W  y       y         y         y        
-CentOS 5.5 Linux 2.6.16 x86_64 Intel    W  y       y         y         n        
-CentOS 5.5 Linux 2.6.16 x86_64 PGI      W  y       y         y         n        
+Mac OS X 10.6                              y(5)    n         y         n
+AIX 6.1 32- and 64-bit                     n       n         n         y
+FreeBSD 6.3-STABLE 32&64 bit               y       n         y         y
+CentOS 5.5 Linux 2.6.18-128 i686 GNU (1)W  y       y(2)      y         y
+CentOS 5.5 Linux 2.6.18-128 i686 Intel  W  y       y         y         n
+CentOS 5.5 Linux 2.6.18-128 i686 PGI    W  y       y         y         n
+CentOS 5.5 Linux 2.6.16 x86_64 GNU (1)  W  y       y         y         y
+CentOS 5.5 Linux 2.6.16 x86_64 Intel    W  y       y         y         n
+CentOS 5.5 Linux 2.6.16 x86_64 PGI      W  y       y         y         n
 RedHat EL4 2.6.18 Xeon Lustre           C  y       y         y         n
-Fedora 12 Linux 2.6.32.16-150.fc12.ppc64   y       y         y         y 
-SGI Linux 2.6.32.19                        y       y         y         y 
+Fedora 12 Linux 2.6.32.16-150.fc12.ppc64   y       y         y         y
+SGI Linux 2.6.32.19                        y       y         y         y
 
            (1) Fortran compiled with gfortran.
            (2) With PGI and Absoft compilers.
@@ -8876,7 +8876,7 @@ Known Problems
   library.  We have fixed these failures.  But it's too late to put the fixes
   into this release.  If you install the 1.8.6 library, it should still work
   despite of these test failures.  If you want the working copy without any
-  test failure, you can request it from us.  SLU - 2011/01/26 
+  test failure, you can request it from us.  SLU - 2011/01/26
 
 * If parallel gmake (e.g., gmake -j 4) is used, the "gmake clean" command
   sometimes fails in the perform directory due to the attempt to remove the
@@ -8896,41 +8896,41 @@ Known Problems
   These programs can be found at:
   http://www.hdfgroup.org/ftp/HDF5/examples/known_problems/
 
-* The h5diff tool can display garbage values when variable-length strings in 
-  a compound type dataset are compared. This also occurs with variable-length 
-  string arrays in a compound type dataset. See bug #1989. This will be fixed 
+* The h5diff tool can display garbage values when variable-length strings in
+  a compound type dataset are compared. This also occurs with variable-length
+  string arrays in a compound type dataset. See bug #1989. This will be fixed
   in the next release. JKM - 2010/11/05
 
-* The AIX --enable-shared setting does not quite work. It can produce a shared 
-  library, but there cannot be more than one shared library that is 
-  interlinked. This means that the high level APIs will not work which is not 
-  very useful. We hope to have a solution in the next release. 
+* The AIX --enable-shared setting does not quite work. It can produce a shared
+  library, but there cannot be more than one shared library that is
+  interlinked. This means that the high level APIs will not work which is not
+  very useful. We hope to have a solution in the next release.
   (AKC - 2010/10/15)
-  
+
 * H5Eset_auto can cause a seg fault for a library API call if the application
-  compiles with -DH5_USE_16_API (see bug 1707).  It will be fixed in the 
+  compiles with -DH5_USE_16_API (see bug 1707).  It will be fixed in the
   next release. SLU - 2010/10/5
-  
-* The library's test dt_arith.c showed a compiler's rounding problem on 
-  Cygwin when converting an unsigned long long to a long double.  The 
-  library's own conversion works fine.  We defined a macro for Cygwin to 
-  skip this test until we can solve the problem.  Please see bug #1813. 
+
+* The library's test dt_arith.c showed a compiler's rounding problem on
+  Cygwin when converting an unsigned long long to a long double.  The
+  library's own conversion works fine.  We defined a macro for Cygwin to
+  skip this test until we can solve the problem.  Please see bug #1813.
   SLU - 2010/5/5
-  
-* All the VFL drivers aren't backwardly compatible.  In H5FDpublic.h, the 
-  structure H5FD_class_t changed in 1.8.  A new parameter was added to the 
-  get_eoa and set_eoa callback functions, and a new callback function 
-  get_type_map was added. The public function H5FDrealloc was taken out in 
-  1.8.  The problem only happens when users define their own driver for 1.6 
+
+* All the VFL drivers aren't backwardly compatible.  In H5FDpublic.h, the
+  structure H5FD_class_t changed in 1.8.  A new parameter was added to the
+  get_eoa and set_eoa callback functions, and a new callback function
+  get_type_map was added. The public function H5FDrealloc was taken out in
+  1.8.  The problem only happens when users define their own driver for 1.6
   and try to plug in a 1.8 library. This will be fixed in 1.10. SLU - 2010/2/2
 
 * MinGW has a missing libstdc++.dll.a library file and will not successfully link
   C++ applications/tests. Do not use the enable-cxx configure option. Read all of
   the INSTALL_MINGW.txt file for all restrictions. ADB - 2009/11/11
-  
-* The PathScale MPI implementation, accessing a Panasas file system, would 
-  cause H5Fcreate() with H5F_ACC_EXCL to fail even when the file does not 
-  exist. This is due to the MPI_File_open() call failing if the amode has 
+
+* The PathScale MPI implementation, accessing a Panasas file system, would
+  cause H5Fcreate() with H5F_ACC_EXCL to fail even when the file does not
+  exist. This is due to the MPI_File_open() call failing if the amode has
   the MPI_MODE_EXCL bit set. (See bug 1468 for details.) AKC - 2009/8/11
 
 * Parallel tests failed with 16 processes with data inconsistency at testphdf5
@@ -8938,15 +8938,15 @@ Known Problems
   collective abort of all ranks at t_posix_compliant / allwrite_allread_blocks
   with MPI IO. CMC - 2009/04/28
 
-* For Red Storm, a Cray XT3 system, the tools/h5ls/testh5ls.sh and 
-  tools/h5copy/testh5copy.sh will fail some of their sub-tests. These 
-  sub-tests are expected to fail and should exit with a non-zero code but 
-  the yod command does not propagate the exit code of the executables. Yod 
-  always returns 0 if it can launch the executable.  The test suite shell 
-  expects a non-zero for this particular test. Therefore, it concludes the 
-  test has failed when it receives 0 from yod.  To skip all the "failing" 
+* For Red Storm, a Cray XT3 system, the tools/h5ls/testh5ls.sh and
+  tools/h5copy/testh5copy.sh will fail some of their sub-tests. These
+  sub-tests are expected to fail and should exit with a non-zero code but
+  the yod command does not propagate the exit code of the executables. Yod
+  always returns 0 if it can launch the executable.  The test suite shell
+  expects a non-zero for this particular test. Therefore, it concludes the
+  test has failed when it receives 0 from yod.  To skip all the "failing"
   tests for now, change them as shown below.
-  
+
   ======== Original tools/h5ls/testh5ls.sh =========
   TOOLTEST tgroup-1.ls 1 -w80 -r -g tgroup.h5
   ======== Change to ===============================
@@ -8968,71 +8968,71 @@ Known Problems
   ==================================================
   AKC - 2008/11/10
 
-* For Red Storm, a Cray XT3 system, the yod command sometimes gives the 
-  message  "yod allocation delayed for node recovery."  This interferes 
-  with test suites that do not expect to see this message.  See the "Red Storm" 
-  section in file INSTALL_parallel for a way to deal with this problem. 
+* For Red Storm, a Cray XT3 system, the yod command sometimes gives the
+  message  "yod allocation delayed for node recovery."  This interferes
+  with test suites that do not expect to see this message.  See the "Red Storm"
+  section in file INSTALL_parallel for a way to deal with this problem.
   AKC - 2008/05/28
-  
-* On an Intel 64 Linux cluster (RH 4, Linux 2.6.9) with Intel 10.0 compilers, 
-  use the -mp -O1 compilation flags to build the libraries. A higher level 
+
+* On an Intel 64 Linux cluster (RH 4, Linux 2.6.9) with Intel 10.0 compilers,
+  use the -mp -O1 compilation flags to build the libraries. A higher level
   of optimization causes failures in several HDF5 library tests.
-  
-* On mpich 1.2.5 and 1.2.6 on a system using four processors, if more than 
-  two processes contribute no I/O and the application asks to do collective 
-  I/O, we have found that a simple collective write will sometimes hang. This 
+
+* On mpich 1.2.5 and 1.2.6 on a system using four processors, if more than
+  two processes contribute no I/O and the application asks to do collective
+  I/O, we have found that a simple collective write will sometimes hang. This
   can be verified with the t_mpi test under testpar.
-  
-* A dataset created or rewritten with a v1.6.3 or later library cannot be 
-  read with the v1.6.2 or earlier library when the Fletcher32 EDC filter 
-  is enabled. There was a bug in the calculation of the Fletcher32 checksum 
-  in the library before v1.6.3; the checksum value was not consistent 
-  between big-endian and little-endian systems.  This bug was fixed in 
-  Release 1.6.3. However, after fixing the bug, the checksum value was no 
-  longer the same as before on little-endian system.  Library releases after 
-  1.6.4 can still read datasets created or rewritten with an HDF5 library of 
+
+* A dataset created or rewritten with a v1.6.3 or later library cannot be
+  read with the v1.6.2 or earlier library when the Fletcher32 EDC filter
+  is enabled. There was a bug in the calculation of the Fletcher32 checksum
+  in the library before v1.6.3; the checksum value was not consistent
+  between big-endian and little-endian systems.  This bug was fixed in
+  Release 1.6.3. However, after fixing the bug, the checksum value was no
+  longer the same as before on little-endian system.  Library releases after
+  1.6.4 can still read datasets created or rewritten with an HDF5 library of
   v1.6.2 or earlier. SLU - 2005/6/30
-  
-* On IBM AIX systems, parallel HDF5 mode will fail some tests with error 
-  messages like "INFO: 0031-XXX ...".  This is from the command `poe'. To 
-  work around this, set the environment variable MP_INFOLEVEL to 0 to 
-  minimize the messages and run the tests again. The tests may fail with 
-  messages like "The socket name is already in use", but HDF5 does not use 
-  sockets. This failure is due to problems with the poe command trying to 
-  set up the debug socket.  To resolve this problem, check to see whether 
-  there are any old /tmp/s.pedb.* files around. These are sockets used by 
-  the poe command and left behind if the command failed at some point. To 
-  resolve this, ask your system administrator to remove the 
-  old/tmp/s.pedb.* files, and then ask IBM to provide a means to run poe 
+
+* On IBM AIX systems, parallel HDF5 mode will fail some tests with error
+  messages like "INFO: 0031-XXX ...".  This is from the command `poe'. To
+  work around this, set the environment variable MP_INFOLEVEL to 0 to
+  minimize the messages and run the tests again. The tests may fail with
+  messages like "The socket name is already in use", but HDF5 does not use
+  sockets. This failure is due to problems with the poe command trying to
+  set up the debug socket.  To resolve this problem, check to see whether
+  there are any old /tmp/s.pedb.* files around. These are sockets used by
+  the poe command and left behind if the command failed at some point. To
+  resolve this, ask your system administrator to remove the
+  old/tmp/s.pedb.* files, and then ask IBM to provide a means to run poe
   without the debug socket.
 
-* The --enable-static-exec configure flag will only statically link 
-  libraries if the static version of that library is present. If only the 
-  shared version of a library exists (i.e., most system libraries on 
-  Solaris, AIX, and Mac, for example, only have shared versions), the flag 
-  should still result in a successful compilation, but note that the 
-  installed executables will not be fully static. Thus, the only guarantee 
-  on these systems is that the executable is statically linked with just 
+* The --enable-static-exec configure flag will only statically link
+  libraries if the static version of that library is present. If only the
+  shared version of a library exists (i.e., most system libraries on
+  Solaris, AIX, and Mac, for example, only have shared versions), the flag
+  should still result in a successful compilation, but note that the
+  installed executables will not be fully static. Thus, the only guarantee
+  on these systems is that the executable is statically linked with just
   the HDF5 library.
-  
-* On an SGI Altix SMP ia64 system, the Intel compiler version 10.1 (which 
-  is the default on that system) does not work properly and results in 
-  failures during the make check (in a static build) and the make 
-  installcheck (in a shared build). This appears to be a compiler 
-  optimization problem. Reducing the optimization by setting CFLAGS to 
-  -O1 or below resolves the issue. Using a newer version of the compiler 
+
+* On an SGI Altix SMP ia64 system, the Intel compiler version 10.1 (which
+  is the default on that system) does not work properly and results in
+  failures during the make check (in a static build) and the make
+  installcheck (in a shared build). This appears to be a compiler
+  optimization problem. Reducing the optimization by setting CFLAGS to
+  -O1 or below resolves the issue. Using a newer version of the compiler
   (11.0) avoids the issue. MAM - 2010/06/01
-  
+
 * On solaris systems, when running the examples with the scripts installed in
-  .../share/hdf5_examples, two of the c tests, h5_extlink and h5_elink_unix2win 
-  may fail or generate HDF5 errors because the script commands in c/run-c-ex.sh 
-  fail to create test directories red, blue, and u2w.  Moving the '!' in lines 
-  67, 70, 73 of run-c-ex.sh will fix the problem.  For example the script command 
-  "if ! test -d red; then" will work on solaris if changed to 
+  .../share/hdf5_examples, two of the c tests, h5_extlink and h5_elink_unix2win
+  may fail or generate HDF5 errors because the script commands in c/run-c-ex.sh
+  fail to create test directories red, blue, and u2w.  Moving the '!' in lines
+  67, 70, 73 of run-c-ex.sh will fix the problem.  For example the script command
+  "if ! test -d red; then" will work on solaris if changed to
   "if test ! -d red; then".
 
 
-%%%%1.8.5%%%%   
+%%%%1.8.5%%%%
 
 
 HDF5 version 1.8.5 released on Fri Jun  4 13:27:31 CDT 2010
@@ -9042,8 +9042,8 @@ INTRODUCTION
 ============
 
 This document describes the differences between HDF5-1.8.4 and HDF5 1.8.5, and
-contains information on the platforms tested and known problems in HDF5-1.8.5. 
-For more details, see the files HISTORY-1_0-1_8_0_rc3.txt and HISTORY-1_8.txt 
+contains information on the platforms tested and known problems in HDF5-1.8.5.
+For more details, see the files HISTORY-1_0-1_8_0_rc3.txt and HISTORY-1_8.txt
 in the release_docs/ directory of the HDF5 source.
 
 Links to the HDF5 1.8.5 source code, documentation, and additional materials
@@ -9055,18 +9055,18 @@ The HDF5 1.8.5 release can be obtained from:
 
      http://www.hdfgroup.org/HDF5/release/obtain5.html
 
-User documentation for 1.8.5 can be accessed directly at this location: 
+User documentation for 1.8.5 can be accessed directly at this location:
 
      http://www.hdfgroup.org/HDF5/doc/
 
-New features in the HDF5-1.8.x release series, including brief general 
-descriptions of some new and modified APIs, are described in the "What's New 
+New features in the HDF5-1.8.x release series, including brief general
+descriptions of some new and modified APIs, are described in the "What's New
 in 1.8.0?" document:
 
      http://www.hdfgroup.org/HDF5/doc/ADGuide/WhatsNew180.html
 
-All new and modified APIs are listed in detail in the "HDF5 Software Changes 
-from Release to Release" document, in the section "Release 1.8.5 (current 
+All new and modified APIs are listed in detail in the "HDF5 Software Changes
+from Release to Release" document, in the section "Release 1.8.5 (current
 release) versus Release 1.8.4":
 
      http://www.hdfgroup.org/HDF5/doc/ADGuide/Changes.html
@@ -9098,11 +9098,11 @@ New Features
       2.8.1 of CMake is required.
     - Configure now adds appropriate defines for supporting large (64-bit)
       files on all systems, where supported, by default, instead of only Linux.
-      This large file support is controllable with the --enable-largefile 
-      configure option. The Linux-specific --enable-linux-lfs option has been 
+      This large file support is controllable with the --enable-largefile
+      configure option. The Linux-specific --enable-linux-lfs option has been
       deprecated in favor of this new option. Please note that specifying
       --disable-large does NOT attempt to "turn off" largefile support if it
-      is natively supported by the compiler, but rather just disables 
+      is natively supported by the compiler, but rather just disables
       configure from actively trying to add any additional compiler flags.
       (MAM - 2010/05/05 - Bug # 1772/1434)
     - Fixed an signal handling mask error in H5detect that might result in
@@ -9112,7 +9112,7 @@ New Features
       of compiler optimization (in particular, allowing '-O3' to work
       with recent versions of GCC).  (QAK - 2010/04/26)
     - Upgraded versions of autotools used to generate configuration suite.
-      We now use Automake 1.11.1, Autoconf 2.65, and Libtool 2.2.6b. 
+      We now use Automake 1.11.1, Autoconf 2.65, and Libtool 2.2.6b.
       (MAM - 2010/04/15)
     - Added the xlc-* and mpcc_r-* BASENAME patterns to be recognized as IBM
       compilers so that the IBM compiler options can be added properly.  This
@@ -9121,7 +9121,7 @@ New Features
 
     Library
     -------
-    - Performance is substantially improved when extending a dataset with early 
+    - Performance is substantially improved when extending a dataset with early
       allocation. (NAF - 2010/03/24 - Bug # 1637)
     - Added support for filtering densely stored groups.  Many of the API
       functions related to filters have been extended to support dense groups
@@ -9131,18 +9131,18 @@ New Features
     Parallel Library
     ----------------
     - None
- 
+
     Tools
     -----
     - h5dump: Added the new packed bits feature which prints packed bits stored
-      in an integer dataset. (AKC/ADB - 2010/5/7) 
-    - h5diff: Fixed incorrect behavior (hang) in parallel mode when specifying 
+      in an integer dataset. (AKC/ADB - 2010/5/7)
+    - h5diff: Fixed incorrect behavior (hang) in parallel mode when specifying
       invalid options (ex: -v and -q). (JKM - 2010/02/17)
     - h5diff: Added new flag --no-dangling-links (see --help for details).
-      (JKM - 2010/02/10) 
+      (JKM - 2010/02/10)
     - h5diff: Added new flag --follow-symlinks (see --help for details).
       (JKM - 2010/01/25)
-    - h5diff: Added a fix to correct the display of garbage values when 
+    - h5diff: Added a fix to correct the display of garbage values when
       displaying big-endian data on a little-endian machine. (JKM - 2009/11/20)
 
     High-Level APIs
@@ -9183,12 +9183,12 @@ Bug Fixes since HDF5-1.8.4
       dataset. (NAF - 2010/05/20)
     - Fixed some memory leaks in VL datatype conversion when strings are
       used as fill values. (MAM - 2010/05/12 - Bug # 1826)
-    - Fixed an H5Rcreate failure when passing in a -1 for the dataspace 
+    - Fixed an H5Rcreate failure when passing in a -1 for the dataspace
       identifier. (ADB - 2010/4/28)
     - Fixed a bug when copying objects with NULL references with the
       H5O_COPY_EXPAND_REFERENCE_FLAG flag set. (NAF - 2010/04/08 - Bug # 1815)
-    - Added a mechanism to the H5I interface to save returned object identifier 
-      structures for immediate re-use if needed. This addresses a potential 
+    - Added a mechanism to the H5I interface to save returned object identifier
+      structures for immediate re-use if needed. This addresses a potential
       performance issue by delaying the case when the next identifier to be
       registered has grown so large that it wraps around and needs to be
       checked to see whether it is available for distribution.
@@ -9200,18 +9200,18 @@ Bug Fixes since HDF5-1.8.4
       (NAF - 2010/03/05 - Bug # 1733)
     - Fixed a bug where the library, when traversing an external link, would
       reopen the source file if nothing else worked. (NAF - 2010/03/05)
-    - Fixed a bug where fractal heap identifiers for attributes and shared 
-      object header messages could be incorrectly encoded in the file for 
-      files created on big-endian platforms.  
-      Please see http://www.hdfgroup.org/HDF5/release/known_problems if you 
-      suspect you have a file with this problem.  
+    - Fixed a bug where fractal heap identifiers for attributes and shared
+      object header messages could be incorrectly encoded in the file for
+      files created on big-endian platforms.
+      Please see http://www.hdfgroup.org/HDF5/release/known_problems if you
+      suspect you have a file with this problem.
       (QAK - 2010/02/23 - Bug # 1755)
     - Fixed an intermittent bug in the b-tree code which could be triggered
       by expanding and shrinking chunked datasets in certain ways.
       (NAF - 2010/02/16)
     - H5Tdetect_class said a VL string is a string type.  But when it's in
-      a compound type, it said it's a VL type.  THis has been fixed to be 
-      consistent; it now always returns a string type. 
+      a compound type, it said it's a VL type.  THis has been fixed to be
+      consistent; it now always returns a string type.
       (SLU - 2009/12/10 - Bug # 1584)
     - Allow "child" files from external links to be correctly located when
       relative to a "parent" file that is opened through a symbolic link.
@@ -9227,23 +9227,23 @@ Bug Fixes since HDF5-1.8.4
     -----
     - Fixed h5ls to return exit code 1 (error) when a non-existent file is
       specified. (JKM - 2010/04/27 - Bug # 1793)
-    - Fixed h5copy failure when copying a dangling link that is specified 
+    - Fixed h5copy failure when copying a dangling link that is specified
       directly. (JKM - 2010/04/22 - Bug # 1817)
-    - Fixed an h5repack failure that lost attributes from a dataset of 
+    - Fixed an h5repack failure that lost attributes from a dataset of
       reference type. (JKM - 2010/3/25 - Bug # 1726)
     - Fixed h5repack error that set NULL for object reference values for
       datasets, groups, or named datatypes. (JKM - 2010/03/19 - Bug # 1814)
 
     F90 API
     ------
-    - None 
+    - None
 
     C++ API
     ------
     - The constructor PropList::PropList(id) was fixed to act properly
-      according to the nature of 'id'.  When 'id' is a property class 
-      identifier, a new property list will be created.  When 'id' is a 
-      property list identifier, a copy of the property list will be made. 
+      according to the nature of 'id'.  When 'id' is a property class
+      identifier, a new property list will be created.  When 'id' is a
+      property list identifier, a copy of the property list will be made.
       (BMR - 2010/5/9)
     - The parameters 'size' and 'bufsize' in CommonFG::getLinkval and
       CommonFG::getComment, respectively, now have default values for the
@@ -9257,17 +9257,17 @@ Bug Fixes since HDF5-1.8.4
     - Fixed a bug in H5DSattach_scale, H5DSis_attached, and H5DSdetach_scale
       caused by using the H5Tget_native_type function to determine the native
       type for reading the REFERENCE_LIST attribute. This bug was exposed
-      on Mac PPC.  (EIP - 2010/05/22 - Bug # 1851) 
-    - Fixed a bug in the H5DSdetach_scale function when 0 bytes were   
-      allocated after the last reference to a dimension scale was removed         
-      from the list of references in a VL element of the DIMENSION_LIST 
-      attribute.  Modified the function to comply with the specification: 
-      the DIMENSION_LIST attribute is now deleted when no dimension scales 
+      on Mac PPC.  (EIP - 2010/05/22 - Bug # 1851)
+    - Fixed a bug in the H5DSdetach_scale function when 0 bytes were
+      allocated after the last reference to a dimension scale was removed
+      from the list of references in a VL element of the DIMENSION_LIST
+      attribute.  Modified the function to comply with the specification:
+      the DIMENSION_LIST attribute is now deleted when no dimension scales
       are left attached.  (EIP - 2010/05/14 - Bug # 1822)
 
     Fortran High-Level APIs:
     ------
-    - None 
+    - None
 
 
 Platforms Tested
@@ -9311,12 +9311,12 @@ The following platforms and compilers have been tested for this release.
                                   MPICH mpich2-1.0.8 compiled with
                                      gcc 4.1.2 and GNU Fortran (GCC) 4.1.2
 
-    Linux 2.6.18-164.el5 #1 SMP   gcc 4.1.2 20080704 and gcc 4.4.2 
+    Linux 2.6.18-164.el5 #1 SMP   gcc 4.1.2 20080704 and gcc 4.4.2
     x86_64 GNU/Linux              GNU Fortran (GCC) 4.1.2 20080704 and 4.4.2
-    (amani)                       g++ (GCC) 4.1.2 20080704 and 4.4.2 
+    (amani)                       g++ (GCC) 4.1.2 20080704 and 4.4.2
                                   G95 (GCC 4.0.3 (g95 0.93!) Apr 21 2010)
-                                  Intel(R) C, C++, Fortran Compilers for 
-                                     applications running on Intel(R) 64, 
+                                  Intel(R) C, C++, Fortran Compilers for
+                                     applications running on Intel(R) 64,
                                      Version 11.1 Build 20090827.
                                   PGI C, Fortran, C++ Version 10.4-0
                                          for 32 & 64-bit target on x86-64
@@ -9328,22 +9328,22 @@ The following platforms and compilers have been tested for this release.
     (cobalt)                      SGI MPI 1.38
 
     SunOS 5.10 32- and 64-bit     Sun C 5.9 SunOS_sparc Patch 124867-14
-    (linew)                       Sun Fortran 95 8.3 SunOS_sparc 
-                                     Patch 127000-13 
+    (linew)                       Sun Fortran 95 8.3 SunOS_sparc
+                                     Patch 127000-13
                                   Sun C++ 5.9 SunOS_sparc Patch 124863-23
-                                  
+
     Intel Xeon Linux 2.6.18-      Intel(R) C++ Version 10.0.026
     92.1.10.el5_lustre.1.6.6smp-  Intel(R) Fortran Compiler Version 10.0.026
     perfctr #7 SMP                Open MPI 1.2.2
     (abe)                         MVAPICH2-0.9.8p28p2patched-intel-ofed-1.2
                                   compiled with icc v10.0.026 and ifort 10.0.026
-                                  
-    Linux 2.6.18-76chaos #1 SMP   Intel(R) C, C++, Fortran Compilers for 
-    SMP x86_64 GNU/Linux          applications running on Intel(R) 64, 
+
+    Linux 2.6.18-76chaos #1 SMP   Intel(R) C, C++, Fortran Compilers for
+    SMP x86_64 GNU/Linux          applications running on Intel(R) 64,
     (SNL Glory)                   Versions 11.1.
-    
+
     Windows XP                    Visual Studio 2008 w/ Intel Fortran 10.1
-                                  Cygwin(1.7.5 native gcc(4.3.4) compiler and 
+                                  Cygwin(1.7.5 native gcc(4.3.4) compiler and
                                   gfortran)
 
     Windows XP x64                Visual Studio 2008 w/ Intel Fortran 10.1
@@ -9352,11 +9352,11 @@ The following platforms and compilers have been tested for this release.
 
     Windows Vista x64             Visual Studio 2008 w/ Intel Fortran 10.1
 
-    MAC OS  10.6.3 (Intel)        i686-apple-darwin10-gcc-4.2.1 (GCC) 4.2.1 
+    MAC OS  10.6.3 (Intel)        i686-apple-darwin10-gcc-4.2.1 (GCC) 4.2.1
     (pahra)                       GNU Fortran (GCC) 4.5.0 20090910
-                                  i686-apple-darwin10-g++-4.2.1 (GCC) 4.2.1 
+                                  i686-apple-darwin10-g++-4.2.1 (GCC) 4.2.1
                                   Intel C, C++ and Fortran compilers 11.1
-    
+
     MAC OS  10.5.8 (Intel)        i686-apple-darwin9-gcc-4.0.1 (GCC) 4.0.1
     (tejeda)
 
@@ -9365,7 +9365,7 @@ The following platforms and compilers have been tested for this release.
 
     OpenVMS Alpha V8.3            HP C V7.3-009
                                   HP C++ V7.3-009
-                                  HP Fortran V8.0-1-104669-48GBT      
+                                  HP Fortran V8.0-1-104669-48GBT
 
 Supported Configuration Features Summary
 ========================================
@@ -9378,7 +9378,7 @@ Supported Configuration Features Summary
           x   = not working in this release
           dna = does not apply
           ( ) = footnote appears below second table
-          <blank> = testing incomplete on this feature or platform 
+          <blank> = testing incomplete on this feature or platform
 
 Platform                           C        F90    F90      C++   zlib  SZIP
                                    parallel        parallel
@@ -9388,7 +9388,7 @@ Windows XP                           n        y(4)   n(4)     y     y     y
 Windows XP x64                       n        y(4)   n(4)     y     y     y
 Windows Vista                        n        y(4)   n(4)     y     y     y
 Windows Vista x64                    n        y(4)   n(4)     y     y     y
-Mac OS X 10.5 PPC                    n        n      n        n     y     n 
+Mac OS X 10.5 PPC                    n        n      n        n     y     n
 Mac OS X 10.5 Intel                  n        y      n        y     y     y
 Mac OS X 10.6 Intel                  n        y      n        y     y     y
 AIX 5.3 32- and 64-bit               n        y      n        y     y     n
@@ -9406,28 +9406,28 @@ RedHat EL4 2.6.18 Xeon Lustre     C  y        y      y        y     y     n
 Cray XT3 2.1.56                      y        y      y        y     y     n
 OpenVMS Alpha V8.3                   n        y      n        y     y     n
 
-Platform                           Shared  Shared    Shared    Thread-  
-                                   C libs  F90 libs  C++ libs  safe     
-Solaris2.10 32-bit                   y       y         y         y        
-Solaris2.10 64-bit                   y       y         y         y        
-Windows XP                           y       y(4)      y         n        
-Windows XP x64                       y       y(4)      y         n        
-Windows Vista                        y       y(4)      y         n        
-Windows Vista x64                    y       y(4)      y         n        
-Mac OS X 10.5 PPC                    y       n         n         n        
-Mac OS X 10.5 (Intel)                y(5)    n         y         n        
-Mac OS X 10.6 (Intel)                y(5)    n         y         n        
-AIX 5.3 32- and 64-bit               n       n         n         n        
-AIX 6.1 32- and 64-bit               n       n         n         n        
-FreeBSD 6.3-STABLE 32&64 bit         y       n         y         y        
-RedHat EL4 2.6.9-42 i686 GNU (1)  W  y       y         y         y        
-RedHat EL5 2.6.18-128 i686 GNU (1)W  y       y(2)      y         y        
-RedHat EL5  2.6.18-128 i686 Intel W  y       y         y         n        
-RedHat EL5 2.6.18-128 i686 PGI    W  y       y         y         n        
-SuSe Linux 2.6.16 x86_64 GNU (1)  W  y       y         y         y        
-SuSe Linux 2.6.16 x86_64 Intel    W  y       y         y         n        
-SuSe Linux 2.6.16 x86_64 PGI      W  y       y         y         n        
-SuSe Linux 2.6.16 SGI Altix ia64  C  y                           n 
+Platform                           Shared  Shared    Shared    Thread-
+                                   C libs  F90 libs  C++ libs  safe
+Solaris2.10 32-bit                   y       y         y         y
+Solaris2.10 64-bit                   y       y         y         y
+Windows XP                           y       y(4)      y         n
+Windows XP x64                       y       y(4)      y         n
+Windows Vista                        y       y(4)      y         n
+Windows Vista x64                    y       y(4)      y         n
+Mac OS X 10.5 PPC                    y       n         n         n
+Mac OS X 10.5 (Intel)                y(5)    n         y         n
+Mac OS X 10.6 (Intel)                y(5)    n         y         n
+AIX 5.3 32- and 64-bit               n       n         n         n
+AIX 6.1 32- and 64-bit               n       n         n         n
+FreeBSD 6.3-STABLE 32&64 bit         y       n         y         y
+RedHat EL4 2.6.9-42 i686 GNU (1)  W  y       y         y         y
+RedHat EL5 2.6.18-128 i686 GNU (1)W  y       y(2)      y         y
+RedHat EL5  2.6.18-128 i686 Intel W  y       y         y         n
+RedHat EL5 2.6.18-128 i686 PGI    W  y       y         y         n
+SuSe Linux 2.6.16 x86_64 GNU (1)  W  y       y         y         y
+SuSe Linux 2.6.16 x86_64 Intel    W  y       y         y         n
+SuSe Linux 2.6.16 x86_64 PGI      W  y       y         y         n
+SuSe Linux 2.6.16 SGI Altix ia64  C  y                           n
 RedHat EL4 2.6.18 Xeon Lustre     C  y       y         y         n
 Cray XT3 2.1.56                      n       n         n         n
 OpenVMS Alpha V8.3                   n       n         n         n
@@ -9435,7 +9435,7 @@ OpenVMS Alpha V8.3                   n       n         n         n
            (1) Fortran compiled with g95.
            (2) With PGI and Absoft compilers.
            (3) With PGI compiler for Fortran.
-           (4) Using Visual Studio 2008. (Cygwin shared libraries are not 
+           (4) Using Visual Studio 2008. (Cygwin shared libraries are not
                supported.)
            (5) Shared C and C++ are disabled when Fortran is configured in.
     Compiler versions for each platform are listed in the preceding
@@ -9445,10 +9445,10 @@ OpenVMS Alpha V8.3                   n       n         n         n
 Known Problems
 ==============
 * The library's test dt_arith.c exposed a compiler's rounding problem on
-  Cygwin when converting from unsigned long long to long double.  The 
-  library's own conversion works correctly.  A macro is defined for Cygwin 
+  Cygwin when converting from unsigned long long to long double.  The
+  library's own conversion works correctly.  A macro is defined for Cygwin
   to skip this test until we can solve the problem.  (Please see bug #1813.)
-  SLU - 2010/5/5 
+  SLU - 2010/5/5
 
 * All the VFL drivers aren't backward compatible.  In H5FDpublic.h, the
   structure H5FD_class_t changed in 1.8.  There is a new parameter added to
@@ -9458,11 +9458,11 @@ Known Problems
   for 1.6 and try to plug it into a 1.8 library.  This affects a very small
   number of users.  (See bug report #1279.)  SLU - 2010/2/2
 
-* MinGW has a missing libstdc++.dll.a library file and will not successfully 
-  link C++ applications/tests. Do not use the enable-cxx configure option. 
-  Read all of the INSTALL_MINGW.txt file for all restrictions. 
+* MinGW has a missing libstdc++.dll.a library file and will not successfully
+  link C++ applications/tests. Do not use the enable-cxx configure option.
+  Read all of the INSTALL_MINGW.txt file for all restrictions.
   ADB - 2009/11/11
-  
+
 * Some tests in tools/h5repack may fail in AIX systems when -q32 mode is used.
   The error is due to insufficient memory requested. Request a large amount
   of runtime memory by setting the following environment variable for more
@@ -9474,7 +9474,7 @@ Known Problems
   cause H5Fcreate() with H5F_ACC_EXCL to fail even when the file is not
   existing. This is due to the MPI_File_open() call failing if the amode has
   the MPI_MODE_EXCL bit set. (See bug 1468 for details.) AKC - 2009/8/11
- 
+
 * Parallel tests failed with 16 processes with data inconsistency at testphdf5
   / dataset_readAll. Parallel tests also failed with 32 and 64 processes with
   collective abort of all ranks at t_posix_compliant / allwrite_allread_blocks
@@ -9523,23 +9523,23 @@ Known Problems
   Storm" in file INSTALL_parallel for a way to deal with this problem.
   AKC - 2008/05/28
 
-* On Intel 64 Linux cluster (RH 4, Linux 2.6.9) with Intel 10.0 compilers, 
-  use -mp -O1 compilation flags to build the libraries. A higher level of 
-  optimization causes failures in several HDF5 library tests. 
+* On Intel 64 Linux cluster (RH 4, Linux 2.6.9) with Intel 10.0 compilers,
+  use -mp -O1 compilation flags to build the libraries. A higher level of
+  optimization causes failures in several HDF5 library tests.
 
-* On mpich 1.2.5 and 1.2.6, if more than two processes contribute no IO and 
-  the application asks to do collective IO, we have found that when using 4 
-  processors, a simple collective write will sometimes be hung. This can be 
+* On mpich 1.2.5 and 1.2.6, if more than two processes contribute no IO and
+  the application asks to do collective IO, we have found that when using 4
+  processors, a simple collective write will sometimes be hung. This can be
   verified with t_mpi test under testpar.
 
-* A dataset created or rewritten with a v1.6.3 library or after cannot be read 
+* A dataset created or rewritten with a v1.6.3 library or after cannot be read
   with the v1.6.2 library or before when the Fletcher32 EDC filter is enabled.
-  There was a bug in the calculation of the Fletcher32 checksum in the 
+  There was a bug in the calculation of the Fletcher32 checksum in the
   library before v1.6.3; the checksum value was not consistent between big-
-  endian and little-endian systems.  This bug was fixed in Release 1.6.3.  
-  However, after fixing the bug, the checksum value was no longer the same as 
-  before on little-endian system.  Library releases after 1.6.4 can still read 
-  datasets created or rewritten with an HDF5 library of v1.6.2 or before.  
+  endian and little-endian systems.  This bug was fixed in Release 1.6.3.
+  However, after fixing the bug, the checksum value was no longer the same as
+  before on little-endian system.  Library releases after 1.6.4 can still read
+  datasets created or rewritten with an HDF5 library of v1.6.2 or before.
   SLU - 2005/6/30
 
 * On IBM AIX systems, parallel HDF5 mode will fail some tests with error
@@ -9547,23 +9547,23 @@ Known Problems
   Set the environment variable MP_INFOLEVEL to 0 to minimize the messages
   and run the tests again.
 
-  The tests may fail with messages like "The socket name is already in use,"  
-  but HDF5 does not use sockets.  This failure is due to problems with the 
-  poe command trying to set up the debug socket.  To resolve this problem, 
-  check to see whether there are many old /tmp/s.pedb.* files staying around.  
-  These are sockets used by the poe command and left behind due to failed 
-  commands.  First, ask your system administrator to clean them out.  
+  The tests may fail with messages like "The socket name is already in use,"
+  but HDF5 does not use sockets.  This failure is due to problems with the
+  poe command trying to set up the debug socket.  To resolve this problem,
+  check to see whether there are many old /tmp/s.pedb.* files staying around.
+  These are sockets used by the poe command and left behind due to failed
+  commands.  First, ask your system administrator to clean them out.
   Lastly, request IBM to provide a means to run poe without the debug socket.
 
 * The --enable-static-exec configure flag will only statically link libraries
   if the static version of that library is present. If only the shared version
   of a library exists (i.e., most system libraries on Solaris, AIX, and Mac,
-  for example, only have shared versions), the flag should still result in a 
-  successful compilation, but note that the installed executables will not be 
-  fully static. Thus, the only guarantee on these systems is that the 
+  for example, only have shared versions), the flag should still result in a
+  successful compilation, but note that the installed executables will not be
+  fully static. Thus, the only guarantee on these systems is that the
   executable is statically linked with just the HDF5 library.
 
-* There is also a configure error on Altix machines that incorrectly reports 
+* There is also a configure error on Altix machines that incorrectly reports
   when a version of Szip without an encoder is being used.
 
 * On FREE-BSD systems when shared libraries are disabled, make install fails
@@ -9582,7 +9582,7 @@ Known Problems
   intended. MAM - 2010/06/01
 
 
-%%%%1.8.4%%%%   
+%%%%1.8.4%%%%
 
 
 HDF5 version 1.8.4 released on Tue Nov 10 15:33:14 CST 2009
@@ -9591,10 +9591,10 @@ HDF5 version 1.8.4 released on Tue Nov 10 15:33:14 CST 2009
 INTRODUCTION
 ============
 
-This document describes the differences between HDF5-1.8.3 and 
-HDF5 1.8.4, and contains information on the platforms tested and 
+This document describes the differences between HDF5-1.8.3 and
+HDF5 1.8.4, and contains information on the platforms tested and
 known problems in HDF5-1.8.4
-For more details, see the files HISTORY-1_0-1_8_0_rc3.txt 
+For more details, see the files HISTORY-1_0-1_8_0_rc3.txt
 and HISTORY-1_8.txt in the release_docs/ directory of the HDF5 source.
 
 Links to the HDF5 1.8.4 source code, documentation, and additional materials
@@ -9606,18 +9606,18 @@ The HDF5 1.8.4 release can be obtained from:
 
      http://www.hdfgroup.org/HDF5/release/obtain5.html
 
-User documentation for 1.8.4 can be accessed directly at this location: 
+User documentation for 1.8.4 can be accessed directly at this location:
 
      http://www.hdfgroup.org/HDF5/doc/
 
-New features in the HDF5-1.8.x release series, including brief general 
-descriptions of some new and modified APIs, are described in the "What's New 
+New features in the HDF5-1.8.x release series, including brief general
+descriptions of some new and modified APIs, are described in the "What's New
 in 1.8.0?" document:
 
      http://www.hdfgroup.org/HDF5/doc/ADGuide/WhatsNew180.html
 
-All new and modified APIs are listed in detail in the "HDF5 Software Changes 
-from Release to Release" document, in the section "Release 1.8.4 (current 
+All new and modified APIs are listed in detail in the "HDF5 Software Changes
+from Release to Release" document, in the section "Release 1.8.4 (current
 release) versus Release 1.8.3":
 
      http://www.hdfgroup.org/HDF5/doc/ADGuide/Changes.html
@@ -9646,7 +9646,7 @@ New Features
     - Configuration suite now uses Automake 1.11 and Autoconf 2.64.
       MAM 2009/08/31.
     - Changed default Gnu fortran compiler from g95 to gfortran since
-      gfortran is more likely installed with gcc now. -AKC 2009/07/19- 
+      gfortran is more likely installed with gcc now. -AKC 2009/07/19-
 
     Library
     -------
@@ -9662,14 +9662,14 @@ New Features
     Parallel Library
     ----------------
     - None
- 
+
     Tools
     -----
     - h5diff: h5diff treats two INFINITY values different. Fixed by checking
-      (value==expect) before call ABS(...) at h5diff_array.c. This will make 
-      that (INF==INF) is true (INF is treated as an number instead of NaN) 
+      (value==expect) before call ABS(...) at h5diff_array.c. This will make
+      that (INF==INF) is true (INF is treated as an number instead of NaN)
       (PC -- 2009/07/28)
-    - h5diff: add option "--use-system-epsilon" to print difference if 
+    - h5diff: add option "--use-system-epsilon" to print difference if
       (|a-b| > EPSILON).
       Change default to use strict equality (PC -- 2009/09/12)
 
@@ -9698,27 +9698,27 @@ Bug Fixes since HDF5-1.8.3
     Configuration
     -------------
     - Removed the following config files, as we no longer support them:
-        config/dec-osf*, config/hpux11.00, config/irix5.x, 
+        config/dec-osf*, config/hpux11.00, config/irix5.x,
         config/powerpc-ibm-aix4.x config/rs6000-ibm-aix5.x config/unicos*
       MAM - 2009/10/08
     - Modified configure and make process to properly preserve user's CFLAGS
       (and company) environment variables. Build will now properly use
       automake's AM_CFLAGS for any compiler flags set by the configure
-      process. Configure will no longer modify CFLAGS directly, nor will 
+      process. Configure will no longer modify CFLAGS directly, nor will
       setting CFLAGS during make completely replace what configure has set up.
       MAM - 2009/10/08
     - Support for TFLOPS, config/intel-osf1, is removed since the TFLOPS
       machine has long retired. AKC - 2009/10/06.
     - Added $(EXEEXT) extension to H5detect when it's executed in the
-      src/Makefile to generate H5Tinit.c so it works correctly on platforms 
+      src/Makefile to generate H5Tinit.c so it works correctly on platforms
       that require the full extension when running executables.
       MAM - 2009/10/01 - BZ #1613
     - Configure will now set FC and CXX to "no" when fortran and c++
       are not being compiled, respectively, so configure will not run
-      some of the compiler tests for these languages when they are not 
+      some of the compiler tests for these languages when they are not
       being used. MAM - 2009/10/01
     - The --enable-static-exec flag will now properly place the -static flag
-      on the link line of all installed executables. This will force the 
+      on the link line of all installed executables. This will force the
       executable to link with static libraries over shared libraries, provided
       the static libraries are available. MAM - 2009/08/31 - BZ #1583
     - The PathScale compiler (v3.2) was mistaken as gcc v4.2.0 but it fails to
@@ -9756,13 +9756,13 @@ Bug Fixes since HDF5-1.8.3
     -----
     - h5dump/h5ls display buffer resize fixed in tools library.
       ADB - 2009/7/21 - 1520
-    - perf_serial test added to Windows projects and check batch file. 
+    - perf_serial test added to Windows projects and check batch file.
       ADB - 2009/06/11 -1504
 
 
     F90 API
     ------
-    - Fixed bug in h5lget_info_by_idx_f by adding missing arguments, 
+    - Fixed bug in h5lget_info_by_idx_f by adding missing arguments,
       consequently changing the API. New API is:
 
       SUBROUTINE h5lget_info_by_idx_f(loc_id, group_name, index_field, order, n, &
@@ -9770,7 +9770,7 @@ Bug Fixes since HDF5-1.8.3
 
         MSB - 2009/9/17 - 1652
 
-    - Corrected the values for the H5L_flags FORTRAN constants: 
+    - Corrected the values for the H5L_flags FORTRAN constants:
         H5L_LINK_ERROR_F, H5L_LINK_HARD_F, H5L_LINK_SOFT_F, H5L_LINK_EXTERNAL_F
         MSB - 2009-09-17 - 1653
 
@@ -9790,7 +9790,7 @@ Bug Fixes since HDF5-1.8.3
 
     Fortran High-Level APIs:
     ------
-    - Lite: the h5ltread_dataset_string_f and h5ltget_attribute_string_f functions 
+    - Lite: the h5ltread_dataset_string_f and h5ltget_attribute_string_f functions
            had memory problems with the g95 fortran compiler. (PVN � 5/13/2009) 1522
 
 
@@ -9823,7 +9823,7 @@ The following platforms and compilers have been tested for this release.
 
     Linux 2.6.18-164.el5          gcc (GCC) 4.1.2 20080704
     #1 SMP i686 i686 i386         G95 (GCC 4.0.3 (g95 0.92!) Jun 24 2009)
-    (jam)                         GNU Fortran (GCC) 4.1.2 20080704 
+    (jam)                         GNU Fortran (GCC) 4.1.2 20080704
                                   (Red Hat 4.1.2-46)
                                   PGI C, Fortran, C++ 8.0-5 32-bit
                                   PGI C, Fortran, C++ 8.0-1 32-bit
@@ -9835,14 +9835,14 @@ The following platforms and compilers have been tested for this release.
                                       applications, Version 11.0, 11.1
                                   Absoft 32-bit Fortran 95 10.0.7
                                   MPICH mpich2-1.0.8 compiled with
-                                  gcc (GCC) 4.1.2 and G95 
+                                  gcc (GCC) 4.1.2 and G95
                                   (GCC 4.0.3 (g95 0.92!)
 
     Linux 2.6.18-164.el5 #1 SMP   gcc 4.1.2 20080704
     x86_64 GNU/Linux              G95 (GCC 4.0.3 (g95 0.92!) Jun 24 2009)
     (amani)                       tested for both 32- and 64-bit binaries
-                                  Intel(R) C, C++, Fortran Compilers for 
-                                  applications running on Intel(R) 64, 
+                                  Intel(R) C, C++, Fortran Compilers for
+                                  applications running on Intel(R) 64,
                                   Versions 11.1.
                                   PGI C, Fortran, C++ Version 9.0-4
                                          for 64-bit target on x86-64
@@ -9858,10 +9858,10 @@ The following platforms and compilers have been tested for this release.
     (cobalt)                      SGI MPI 1.38
 
     SunOS 5.10 32- and 64-bit     Sun C 5.9 SunOS_sparc Patch 124867-11 2009/04/30
-    (linew)                       Sun Fortran 95 8.3 SunOS_sparc 
+    (linew)                       Sun Fortran 95 8.3 SunOS_sparc
                                   Patch 127000-11 2009/10/06
-                                  Sun C++ 5.9 SunOS_sparc 
-                                  Patch 124863-16 2009/09/15 
+                                  Sun C++ 5.9 SunOS_sparc
+                                  Patch 124863-16 2009/09/15
 
     Intel Xeon Linux 2.6.18-      Intel(R) C++ Version 10.0.026
     92.1.10.el5_lustre.1.6.6smp-  Intel(R) Fortran Compiler Version 10.0.026
@@ -9874,15 +9874,15 @@ The following platforms and compilers have been tested for this release.
     (NCSA tg-login)               Intel(R) Fortran Compiler Version 8.1.033
                                   mpich-gm-1.2.7p1..16-intel-8.1.037-r1
 
-    Linux 2.6.9-55.0.9.EL_lustre  Intel(R) C, C++, Fortran Compilers for 
-    .1.4.11.1smp #1 SMP           applications running on Intel(R) 64, 
+    Linux 2.6.9-55.0.9.EL_lustre  Intel(R) C, C++, Fortran Compilers for
+    .1.4.11.1smp #1 SMP           applications running on Intel(R) 64,
     SMP x86_64 GNU/Linux          Versions 10.1.
-    (SNL Thunderbird)             
-                                  
-    Linux 2.6.18-76chaos #1 SMP   Intel(R) C, C++, Fortran Compilers for 
-    SMP x86_64 GNU/Linux          applications running on Intel(R) 64, 
+    (SNL Thunderbird)
+
+    Linux 2.6.18-76chaos #1 SMP   Intel(R) C, C++, Fortran Compilers for
+    SMP x86_64 GNU/Linux          applications running on Intel(R) 64,
     (SNL Glory)                   Versions 10.1.
-    
+
     Windows XP                    Visual Studio 2005 w/ Intel Fortran 9.1
                                   Cygwin(native gcc compiler and g95)
 
@@ -9909,7 +9909,7 @@ Supported Configuration Features Summary
           x   = not working in this release
           dna = does not apply
           ( ) = footnote appears below second table
-          <blank> = testing incomplete on this feature or platform 
+          <blank> = testing incomplete on this feature or platform
 
 Platform                           C        F90    F90      C++   zlib  SZIP
                                    parallel        parallel
@@ -9933,25 +9933,25 @@ SuSe Linux 2.4.21 ia64 Intel      C  y        y      y        y     y     n
 Cray XT3 2.0.62                      y        y      y        y     y     n
 
 
-Platform                           Shared  Shared    Shared    Thread-  
-                                   C libs  F90 libs  C++ libs  safe     
-Solaris2.10 32-bit                   y       y         y         y        
-Solaris2.10 64-bit                   y       y         y         y        
-Windows XP                           y       y(4)      y         y        
-Windows XP x64                       y       y(4)      y         y        
-Windows Vista                        y       n         n         y        
-Mac OS X 10.5                        y       n         y         n        
-AIX 5.3 32- and 64-bit               n       n         n         n        
-FreeBSD 6.3-STABLE 32&64 bit         y       y         y         y        
-RedHat EL5 2.6.18-164 i686 GNU (1)W  y       y(2)      y         y        
-RedHat EL5 2.6.18-164 i686 Intel  W  y       y         y         n        
-RedHat EL5 2.6.18-164 i686 PGI    W  y       y         y         n        
-RedHat EL5 2.6.18-164 x86_64 GNU(1)W y       y         y         y        
-RedHat EL5 2.6.18-164 x86_64 IntelW  y       y         y         n        
-RedHat EL5 2.6.18-164 x86_64 PGI  W  y       y         y         n        
-SuSe Linux 2.6.16 SGI Altix ia64  C  y                           n        
+Platform                           Shared  Shared    Shared    Thread-
+                                   C libs  F90 libs  C++ libs  safe
+Solaris2.10 32-bit                   y       y         y         y
+Solaris2.10 64-bit                   y       y         y         y
+Windows XP                           y       y(4)      y         y
+Windows XP x64                       y       y(4)      y         y
+Windows Vista                        y       n         n         y
+Mac OS X 10.5                        y       n         y         n
+AIX 5.3 32- and 64-bit               n       n         n         n
+FreeBSD 6.3-STABLE 32&64 bit         y       y         y         y
+RedHat EL5 2.6.18-164 i686 GNU (1)W  y       y(2)      y         y
+RedHat EL5 2.6.18-164 i686 Intel  W  y       y         y         n
+RedHat EL5 2.6.18-164 i686 PGI    W  y       y         y         n
+RedHat EL5 2.6.18-164 x86_64 GNU(1)W y       y         y         y
+RedHat EL5 2.6.18-164 x86_64 IntelW  y       y         y         n
+RedHat EL5 2.6.18-164 x86_64 PGI  W  y       y         y         n
+SuSe Linux 2.6.16 SGI Altix ia64  C  y                           n
 RedHat EL4 2.6.18 Xeon Lustre     C  y       y         y         n
-SuSe Linux 2.4.21 ia64 Intel      C  y       y         y         n        
+SuSe Linux 2.4.21 ia64 Intel      C  y       y         y         n
 Cray XT3 2.0.62                      n       n         n         n
 
            (1) Fortran compiled with g95.
@@ -9979,15 +9979,15 @@ Known Problems
   cause H5Fcreate() with H5F_ACC_EXCL to fail even when the file is not
   existing. This is due to the MPI_File_open() call failing if the amode has
   the MPI_MODE_EXCL bit set. (See bug 1468 for details.) AKC - 2009/8/11
- 
+
 * Parallel tests failed with 16 processes with data inconsistency at testphdf5
   / dataset_readAll. Parallel tests also failed with 32 and 64 processes with
   collective abort of all ranks at t_posix_compliant / allwrite_allread_blocks
   with MPI IO. CMC - 2009/04/28
 
-* There is a known issue in which HDF5 will change the timestamp on a file 
+* There is a known issue in which HDF5 will change the timestamp on a file
   simply by opening it with read/write permissions, even if the file is not
-  modified in any way. This is due to the way in which HDF5 manages the file 
+  modified in any way. This is due to the way in which HDF5 manages the file
   superblock. A fix is currently underway and should be included in the 1.8.4
   release of HDF5. MAM - 2009/04/28
 
@@ -10034,23 +10034,23 @@ Known Problems
   Storm" in file INSTALL_parallel for a way to deal with this problem.
   AKC - 2008/05/28
 
-* On Intel 64 Linux cluster (RH 4, Linux 2.6.9) with Intel 10.0 compilers, 
-  use -mp -O1 compilation flags to build the libraries. A higher level of 
-  optimization causes failures in several HDF5 library tests. 
+* On Intel 64 Linux cluster (RH 4, Linux 2.6.9) with Intel 10.0 compilers,
+  use -mp -O1 compilation flags to build the libraries. A higher level of
+  optimization causes failures in several HDF5 library tests.
 
-* On mpich 1.2.5 and 1.2.6, if more than two processes contribute no IO and 
-  the application asks to do collective IO, we have found that when using 4 
-  processors, a simple collective write will sometimes be hung. This can be 
+* On mpich 1.2.5 and 1.2.6, if more than two processes contribute no IO and
+  the application asks to do collective IO, we have found that when using 4
+  processors, a simple collective write will sometimes be hung. This can be
   verified with t_mpi test under testpar.
 
-* A dataset created or rewritten with a v1.6.3 library or after cannot be read 
+* A dataset created or rewritten with a v1.6.3 library or after cannot be read
   with the v1.6.2 library or before when the Fletcher32 EDC filter is enabled.
-  There was a bug in the calculation of the Fletcher32 checksum in the 
+  There was a bug in the calculation of the Fletcher32 checksum in the
   library before v1.6.3; the checksum value was not consistent between big-
-  endian and little-endian systems.  This bug was fixed in Release 1.6.3.  
-  However, after fixing the bug, the checksum value was no longer the same as 
-  before on little-endian system.  Library releases after 1.6.4 can still read 
-  datasets created or rewritten with an HDF5 library of v1.6.2 or before.  
+  endian and little-endian systems.  This bug was fixed in Release 1.6.3.
+  However, after fixing the bug, the checksum value was no longer the same as
+  before on little-endian system.  Library releases after 1.6.4 can still read
+  datasets created or rewritten with an HDF5 library of v1.6.2 or before.
   SLU - 2005/6/30
 
 * On IBM AIX systems, parallel HDF5 mode will fail some tests with error
@@ -10058,26 +10058,26 @@ Known Problems
   Set the environment variable MP_INFOLEVEL to 0 to minimize the messages
   and run the tests again.
 
-  The tests may fail with messages like "The socket name is already in use",  
-  but HDF5 does not use sockets.  This failure is due to problems with the 
-  poe command trying to set up the debug socket.  To resolve this problem, 
-  check to see whether there are many old /tmp/s.pedb.* files staying around.  
-  These are sockets used by the poe command and left behind due to failed 
-  commands.  First, ask your system administrator to clean them out.  
+  The tests may fail with messages like "The socket name is already in use",
+  but HDF5 does not use sockets.  This failure is due to problems with the
+  poe command trying to set up the debug socket.  To resolve this problem,
+  check to see whether there are many old /tmp/s.pedb.* files staying around.
+  These are sockets used by the poe command and left behind due to failed
+  commands.  First, ask your system administrator to clean them out.
   Lastly, request IBM to provide a means to run poe without the debug socket.
 
 * The --enable-static-exec configure flag will only statically link libraries
   if the static version of that library is present. If only the shared version
-  of a library exists (i.e., most system libraries on Solaris, AIX, and Mac, 
-  for example, only have shared versions), the flag should still result in a 
-  successful compilation, but note that the installed executables will not be 
-  fully static. Thus, the only guarantee on these systems is that the 
+  of a library exists (i.e., most system libraries on Solaris, AIX, and Mac,
+  for example, only have shared versions), the flag should still result in a
+  successful compilation, but note that the installed executables will not be
+  fully static. Thus, the only guarantee on these systems is that the
   executable is statically linked with just the HDF5 library.
 
-* There is also a configure error on Altix machines that incorrectly reports 
+* There is also a configure error on Altix machines that incorrectly reports
   when a version of Szip without an encoder is being used.
 
-%%%%1.8.3%%%%   
+%%%%1.8.3%%%%
 
 
 HDF5 version 1.8.3 released on Mon May  4 09:21:00 CDT 2009
@@ -10086,10 +10086,10 @@ HDF5 version 1.8.3 released on Mon May  4 09:21:00 CDT 2009
 INTRODUCTION
 ============
 
-This document describes the differences between HDF5-1.8.2 and 
-HDF5 1.8.3, and contains information on the platforms tested and 
-known problems in HDF5-1.8.3. 
-For more details, see the files HISTORY-1_0-1_8_0_rc3.txt 
+This document describes the differences between HDF5-1.8.2 and
+HDF5 1.8.3, and contains information on the platforms tested and
+known problems in HDF5-1.8.3.
+For more details, see the files HISTORY-1_0-1_8_0_rc3.txt
 and HISTORY-1_8.txt in the release_docs/ directory of the HDF5 source.
 
 Links to the HDF5 1.8.3 source code, documentation, and additional materials
@@ -10101,18 +10101,18 @@ The HDF5 1.8.3 release can be obtained from:
 
      http://www.hdfgroup.org/HDF5/release/obtain5.html
 
-User documentation for 1.8.3 can be accessed directly at this location: 
+User documentation for 1.8.3 can be accessed directly at this location:
 
      http://www.hdfgroup.org/HDF5/doc/
 
-New features in the HDF5-1.8.x release series, including brief general 
-descriptions of some new and modified APIs, are described in the "What's New 
+New features in the HDF5-1.8.x release series, including brief general
+descriptions of some new and modified APIs, are described in the "What's New
 in 1.8.0?" document:
 
      http://www.hdfgroup.org/HDF5/doc/ADGuide/WhatsNew180.html
 
-All new and modified APIs are listed in detail in the "HDF5 Software Changes 
-from Release to Release" document, in the section "Release 1.8.3 (current 
+All new and modified APIs are listed in detail in the "HDF5 Software Changes
+from Release to Release" document, in the section "Release 1.8.3 (current
 release) versus Release 1.8.2":
 
      http://www.hdfgroup.org/HDF5/doc/ADGuide/Changes.html
@@ -10138,7 +10138,7 @@ New Features
 
     Configuration
     -------------
-    - Added libtool version numbers to generated c++, fortran, and 
+    - Added libtool version numbers to generated c++, fortran, and
       hl libraries. MAM 2009/04/19.
     - Regenerated Makefile.ins using Automake 1.10.2. MAM 2009/04/19.
     - Added a Make target of check-all-install to test the correctness of
@@ -10178,7 +10178,7 @@ New Features
       (chunk allocation), and t_posix_compliant (posix compliance). The rest of
       the parallel tests already use in the code the number of processes
       available in the communicator. (CMC - 2009/04/28)
- 
+
     Tools
     -----
     - h5diff new flag, -c, --compare, list objects that are not comparable.
@@ -10186,16 +10186,16 @@ New Features
     - h5diff new flag, -N, --nan, avoids NaNs detection. PVN - 2009/4/2
     - h5dump correctly specifies XML dtd / schema urls ADB - 2009/4/3 - 1519
     - h5repack now handles group creation order. PVN - 2009/4/2 - 1402
-    - h5repack: When user doesn't specify a chunk size, h5repack now 
-      defines a default chunk size as the same size of the size of the 
-      hyperslab used to read the chunks. The size of the hyperslabs are 
-      defined as the size of each dimension or a predefined constant, 
-      whatever is smaller. This assures that the chunk read fits in the 
+    - h5repack: When user doesn't specify a chunk size, h5repack now
+      defines a default chunk size as the same size of the size of the
+      hyperslab used to read the chunks. The size of the hyperslabs are
+      defined as the size of each dimension or a predefined constant,
+      whatever is smaller. This assures that the chunk read fits in the
       chunk cache. PVN - 2008/11/21
 
     High-Level APIs
     ---------------
-    - Table: In version 3.0 of Table, the writing of the "NROWS" attribute 
+    - Table: In version 3.0 of Table, the writing of the "NROWS" attribute
       (used to store number of records) was deprecated. PVN - 2008/11/24
 
     F90 API
@@ -10221,12 +10221,12 @@ Bug Fixes since HDF5-1.8.2
 
     Configuration
     -------------
-    - The --includedir=DIR configuration option now works as intended, and 
+    - The --includedir=DIR configuration option now works as intended, and
       can be used to specify the location to install C header files. The
       default location remains unchanged, residing at ${prefix}/include.
       MAM - 2009/03/10 - BZ #1381
     - Configure no longer removes the '-g' flag from CFLAGS when in production
-      mode if it has been explicitly set in the CFLAGS environment variable 
+      mode if it has been explicitly set in the CFLAGS environment variable
       prior to configuration. MAM - 2009/03/09 - BZ #1401
 
     Library
@@ -10235,7 +10235,7 @@ Bug Fixes since HDF5-1.8.2
       API. NAF - 2009/04/20 - 1533
     - Fixed a problem with using data transforms with non-native types in the
       file. NAF - 2009/04/20 - 1548
-    - Added direct.h include file to windows section of H5private.h 
+    - Added direct.h include file to windows section of H5private.h
       to fix _getcwd() warning. ADB - 2009/04/14 - 1536
     - Fixed a bug that prevented external links from working after calling
       H5close(). NAF - 2009/04/10 - 1539
@@ -10253,8 +10253,8 @@ Bug Fixes since HDF5-1.8.2
     - Modified library to be able to open files with corrupt root group symbol
       table messages, and correct these errors if they are found.  Such files
       can only be successfully opened with write access. NAF - 2009/03/23 - 1189
-    - Removed the long_long #define and replaced all instances with 
-      "long long". This caused problems with third party products. All 
+    - Removed the long_long #define and replaced all instances with
+      "long long". This caused problems with third party products. All
       currently supported compliers support the type. ADB - 2009/03/05
     - Fixed various bugs that could prevent the fill value from being written
       in certain rare cases. NAF - 2009/02/26 - 1469
@@ -10274,12 +10274,12 @@ Bug Fixes since HDF5-1.8.2
     - Fixed a bug where H5Tpack wouldn't remove trailing space from an otherwise
       packed compound type. NAF - 2009/01/14
     - Fixed up some old v2 btree assertions that get run in debug mode that
-      were previously failing on compilation, and removed some of the 
+      were previously failing on compilation, and removed some of the
       more heavily outdated and non-rewritable ones. MAM - 2008/12/15
     - Fixed a bug that could cause problems when "automatically" unmounting
       multiple files. NAF - 2008/11/17
-    - H5Dset_extent: when shrinking dimensions, some chunks were not deleted.  
-      PVN - 2009/01/8 
+    - H5Dset_extent: when shrinking dimensions, some chunks were not deleted.
+      PVN - 2009/01/8
 
     Parallel Library
     ----------------
@@ -10289,11 +10289,11 @@ Bug Fixes since HDF5-1.8.2
     -----
     - Fixed many problems that could occur when using h5repack with named
       datatypes. NAF - 2009/4/20 - 1516/1466
-    - h5dump, h5diff, h5repack were not reading (by hyperslabs) datasets 
+    - h5dump, h5diff, h5repack were not reading (by hyperslabs) datasets
       that have a datatype datum size greater than H5TOOLS_BUFSIZE, a constant
-      defined as 1024Kb, such as array types with large dimensions. 
+      defined as 1024Kb, such as array types with large dimensions.
       PVN - 2009/4/1 - 1501
-    - h5import: By selecting a compression type, a big endian byte order 
+    - h5import: By selecting a compression type, a big endian byte order
       was being selected. PVN - 2009/3/11 - 1462
     - zip_perf.c had missing argument on one of the open() calls. Fixed.
       AKC - 2008/12/9
@@ -10308,13 +10308,13 @@ Bug Fixes since HDF5-1.8.2
 
     High-Level APIs:
     ------
-    - Dimension scales: The scale index return value in H5DSiterate_scales 
+    - Dimension scales: The scale index return value in H5DSiterate_scales
       was not always incremented. PVN - 2009/4/8 - 1538
 
     Fortran High-Level APIs:
     ------
-    - Lite: The h5ltget_dataset_info_f function (gets information about 
-      a dataset) was not correctly returning the dimension array 
+    - Lite: The h5ltget_dataset_info_f function (gets information about
+      a dataset) was not correctly returning the dimension array
                                    PVN - 2009/3/23
 
 
@@ -10345,7 +10345,7 @@ The following platforms and compilers have been tested for this release.
                                   gfortran 4.4.1 20090421
 
     IRIX64 6.5 (64 & n32)         MIPSpro cc 7.4.4m
-                                  F90 MIPSpro 7.4.4m 
+                                  F90 MIPSpro 7.4.4m
                                   C++ MIPSpro cc 7.4.4m
 
     Linux 2.6.18-128.1.6.el5xen   gcc (GCC) 4.1.2
@@ -10369,8 +10369,8 @@ The following platforms and compilers have been tested for this release.
 
     Linux 2.6.16.60-0.37-smp #1   gcc 4.1.2
     SMP x86_64 GNU/Linux          G95 (GCC 4.0.3 (g95 0.92!) Feb 4 2009)
-    (smirom)                      Intel(R) C, C++, Fortran Compilers for 
-                                  applications running on Intel(R) 64, 
+    (smirom)                      Intel(R) C, C++, Fortran Compilers for
+                                  applications running on Intel(R) 64,
                                   Versions 10.1, 11.0.
                                   PGI C, Fortran, C++ Version 7.2-1, 8.0-1
                                          for 64-bit target on x86-64
@@ -10384,9 +10384,9 @@ The following platforms and compilers have been tested for this release.
     (cobalt)                      SGI MPI 1.38
 
     SunOS 5.10 32- and 64-bit     Sun WorkShop 6 update 2 C 5.9 Patch 124867-09
-    (linew)                       Sun WorkShop 6 update 2 Fortran 95 8.3 
+    (linew)                       Sun WorkShop 6 update 2 Fortran 95 8.3
                                   Patch 127000-07
-                                  Sun WorkShop 6 update 2 C++ 5.8 
+                                  Sun WorkShop 6 update 2 C++ 5.8
                                   Patch 124863-11
 
     Intel Xeon Linux 2.6.18-      gcc 3.4.6 20060404
@@ -10401,22 +10401,22 @@ The following platforms and compilers have been tested for this release.
     (NCSA tg-login)               Intel(R) Fortran Compiler Version 8.1.033
                                   mpich-gm-1.2.7p1..16-intel-8.1.037-r1
 
-    Linux 2.6.9-55.0.9.EL_lustre  Intel(R) C, C++, Fortran Compilers for 
-    .1.4.11.1smp #1 SMP           applications running on Intel(R) 64, 
+    Linux 2.6.9-55.0.9.EL_lustre  Intel(R) C, C++, Fortran Compilers for
+    .1.4.11.1smp #1 SMP           applications running on Intel(R) 64,
     SMP x86_64 GNU/Linux          Versions 9.1.
-    (SNL Spirit)             
-                                  
-    Linux 2.6.9-55.0.9.EL_lustre  Intel(R) C, C++, Fortran Compilers for 
-    .1.4.11.1smp #1 SMP           applications running on Intel(R) 64, 
+    (SNL Spirit)
+
+    Linux 2.6.9-55.0.9.EL_lustre  Intel(R) C, C++, Fortran Compilers for
+    .1.4.11.1smp #1 SMP           applications running on Intel(R) 64,
     SMP x86_64 GNU/Linux          Versions 10.1.
-    (SNL Thunderbird)             
-                                  
-    Linux 2.6.18-63chaos #1 SMP   Intel(R) C, C++, Fortran Compilers for 
-    SMP x86_64 GNU/Linux          applications running on Intel(R) 64, 
+    (SNL Thunderbird)
+
+    Linux 2.6.18-63chaos #1 SMP   Intel(R) C, C++, Fortran Compilers for
+    SMP x86_64 GNU/Linux          applications running on Intel(R) 64,
     (SNL Glory)                   Versions 10.1.
-    
-    Linux 2.6.18-63chaos #1 SMP   Intel(R) C, C++, Fortran Compilers for 
-    SMP x86_64 GNU/Linux          applications running on Intel(R) 64, 
+
+    Linux 2.6.18-63chaos #1 SMP   Intel(R) C, C++, Fortran Compilers for
+    SMP x86_64 GNU/Linux          applications running on Intel(R) 64,
     (LLNL Zeus)                   Versions 9.1.
 				  gcc/gfortran/g++ (GCC) 4.1.2.
 
@@ -10445,7 +10445,7 @@ Supported Configuration Features Summary
           x   = not working in this release
           dna = does not apply
           ( ) = footnote appears below second table
-          <blank> = testing incomplete on this feature or platform 
+          <blank> = testing incomplete on this feature or platform
 
 Platform                           C        F90    F90      C++   zlib  SZIP
                                    parallel        parallel
@@ -10472,28 +10472,28 @@ SuSe Linux 2.4.21 ia64 Intel      C  y        y      y        y     y     n
 Cray XT3 2.0.41                      y        y      y        y     y     n
 
 
-Platform                           Shared  Shared    Shared    Thread-  
-                                   C libs  F90 libs  C++ libs  safe     
-Solaris2.10 32-bit                   y       y         y         y        
-Solaris2.10 64-bit                   y       y         y         y        
-IRIX64_6.5 32-bit                    y       dna       y         y        
-IRIX64_6.5 64-bit                    y       y         n         y        
-Windows XP                           y       y(4)      y         y        
-Windows XP x64                       y       y(4)      y         y        
-Windows Vista                        y       n         n         y        
-Mac OS X 10.5                        y       n         y         n        
-AIX 5.3 32- and 64-bit               n       n         n         n        
-FreeBSD 6.3-STABLE 32&64 bit         y       n         y         y        
-RedHat EL4 2.6.9-42 i686 GNU (1)  W  y       y         y         y        
-RedHat EL5 2.6.18-128 i686 GNU (1)W  y       y(2)      y         y        
-RedHat EL5  2.6.18-128 i686 Intel W  y       y         y         n        
-RedHat EL5 2.6.18-128 i686 PGI    W  y       y         y         n        
-SuSe Linux 2.6.16 x86_64 GNU (1)  W  y       y         y         y        
-SuSe Linux 2.6.16 x86_64 Intel    W  y       y         y         n        
-SuSe Linux 2.6.16 x86_64 PGI      W  y       y         y         n        
-SuSe Linux 2.6.16 SGI Altix ia64  C  y                           n        
+Platform                           Shared  Shared    Shared    Thread-
+                                   C libs  F90 libs  C++ libs  safe
+Solaris2.10 32-bit                   y       y         y         y
+Solaris2.10 64-bit                   y       y         y         y
+IRIX64_6.5 32-bit                    y       dna       y         y
+IRIX64_6.5 64-bit                    y       y         n         y
+Windows XP                           y       y(4)      y         y
+Windows XP x64                       y       y(4)      y         y
+Windows Vista                        y       n         n         y
+Mac OS X 10.5                        y       n         y         n
+AIX 5.3 32- and 64-bit               n       n         n         n
+FreeBSD 6.3-STABLE 32&64 bit         y       n         y         y
+RedHat EL4 2.6.9-42 i686 GNU (1)  W  y       y         y         y
+RedHat EL5 2.6.18-128 i686 GNU (1)W  y       y(2)      y         y
+RedHat EL5  2.6.18-128 i686 Intel W  y       y         y         n
+RedHat EL5 2.6.18-128 i686 PGI    W  y       y         y         n
+SuSe Linux 2.6.16 x86_64 GNU (1)  W  y       y         y         y
+SuSe Linux 2.6.16 x86_64 Intel    W  y       y         y         n
+SuSe Linux 2.6.16 x86_64 PGI      W  y       y         y         n
+SuSe Linux 2.6.16 SGI Altix ia64  C  y                           n
 RedHat EL4 2.6.18 Xeon Lustre     C  y       y         y         n
-SuSe Linux 2.4.21 ia64 Intel      C  y       y         y         n        
+SuSe Linux 2.4.21 ia64 Intel      C  y       y         y         n
 Cray XT3 2.0.41                      n       n         n         n
 
            (1) Fortran compiled with g95.
@@ -10511,9 +10511,9 @@ Known Problems
   collective abort of all ranks at t_posix_compliant / allwrite_allread_blocks
   with MPI IO. CMC - 2009/04/28
 
-* There is a known issue in which HDF5 will change the timestamp on a file 
+* There is a known issue in which HDF5 will change the timestamp on a file
   simply by opening it with read/write permissions, even if the file is not
-  modified in any way. This is due to the way in which HDF5 manages the file 
+  modified in any way. This is due to the way in which HDF5 manages the file
   superblock. A fix is currently underway and should be included in the 1.8.4
   release of HDF5. MAM - 2009/04/28
 
@@ -10560,17 +10560,17 @@ Known Problems
   Storm" in file INSTALL_parallel for a way to deal with this problem.
   AKC - 2008/05/28
 
-* We have discovered two problems when running collective IO parallel HDF5 
-  tests with chunking storage on the ChaMPIon MPI compiler on tungsten, a 
+* We have discovered two problems when running collective IO parallel HDF5
+  tests with chunking storage on the ChaMPIon MPI compiler on tungsten, a
   Linux cluster at NCSA.
 
-  Under some complex selection cases: 
+  Under some complex selection cases:
   1) MPI_Get_element returns the wrong value.
-  2) MPI_Type_struct also generates the wrong derived datatype and corrupt 
+  2) MPI_Type_struct also generates the wrong derived datatype and corrupt
      data may be generated.
-  These issues arise only when turning on collective IO with chunking storage 
-  with some complex selections. We have not found these problems on other 
-  MPI-IO compilers. If you encounter these problems, you may use independent 
+  These issues arise only when turning on collective IO with chunking storage
+  with some complex selections. We have not found these problems on other
+  MPI-IO compilers. If you encounter these problems, you may use independent
   IO instead.
 
   To avoid this behavior, change the following line in your code
@@ -10579,33 +10579,33 @@ Known Problems
       H5Pset_dxpl_mpio(xfer_plist, H5FD_MPIO_INDEPENDENT);
   KY - 2007/08/24
 
-* On Intel 64 Linux cluster (RH 4, Linux 2.6.9) with Intel 10.0 compilers, 
-  use -mp -O1 compilation flags to build the libraries. A higher level of 
-  optimization causes failures in several HDF5 library tests. 
+* On Intel 64 Linux cluster (RH 4, Linux 2.6.9) with Intel 10.0 compilers,
+  use -mp -O1 compilation flags to build the libraries. A higher level of
+  optimization causes failures in several HDF5 library tests.
 
-* For LLNL, uP: both serial and parallel tests pass.  
+* For LLNL, uP: both serial and parallel tests pass.
   Zeus: Serial tests pass but parallel tests fail with a known problem in MPI.
-  ubgl: Serial tests pass but parallel tests fail. 
+  ubgl: Serial tests pass but parallel tests fail.
 
-* On mpich 1.2.5 and 1.2.6, if more than two processes contribute no IO and 
-  the application asks to do collective IO, we have found that when using 4 
-  processors, a simple collective write will sometimes be hung. This can be 
+* On mpich 1.2.5 and 1.2.6, if more than two processes contribute no IO and
+  the application asks to do collective IO, we have found that when using 4
+  processors, a simple collective write will sometimes be hung. This can be
   verified with t_mpi test under testpar.
 
 * On IRIX6.5, when the C compiler version is greater than 7.4, complicated
   MPI derived datatype code will work. However, the user should increase
-  the value of the MPI_TYPE_MAX environment variable to some appropriate value 
-  to use collective irregular selection code.  For example, the current 
-  parallel HDF5 test needs to raise MPI_TYPE_MAX to 200,000 to pass the test. 
+  the value of the MPI_TYPE_MAX environment variable to some appropriate value
+  to use collective irregular selection code.  For example, the current
+  parallel HDF5 test needs to raise MPI_TYPE_MAX to 200,000 to pass the test.
 
-* A dataset created or rewritten with a v1.6.3 library or after cannot be read 
+* A dataset created or rewritten with a v1.6.3 library or after cannot be read
   with the v1.6.2 library or before when the Fletcher32 EDC filter is enabled.
-  There was a bug in the calculation of the Fletcher32 checksum in the 
+  There was a bug in the calculation of the Fletcher32 checksum in the
   library before v1.6.3; the checksum value was not consistent between big-
-  endian and little-endian systems.  This bug was fixed in Release 1.6.3.  
-  However, after fixing the bug, the checksum value was no longer the same as 
-  before on little-endian system.  Library releases after 1.6.4 can still read 
-  datasets created or rewritten with an HDF5 library of v1.6.2 or before.  
+  endian and little-endian systems.  This bug was fixed in Release 1.6.3.
+  However, after fixing the bug, the checksum value was no longer the same as
+  before on little-endian system.  Library releases after 1.6.4 can still read
+  datasets created or rewritten with an HDF5 library of v1.6.2 or before.
   SLU - 2005/6/30
 
 * On IBM AIX systems, parallel HDF5 mode will fail some tests with error
@@ -10613,34 +10613,34 @@ Known Problems
   Set the environment variable MP_INFOLEVEL to 0 to minimize the messages
   and run the tests again.
 
-  The tests may fail with messages like "The socket name is already in use",  
-  but HDF5 does not use sockets.  This failure is due to problems with the 
-  poe command trying to set up the debug socket.  To resolve this problem, 
-  check to see whether there are many old /tmp/s.pedb.* files staying around.  
-  These are sockets used by the poe command and left behind due to failed 
-  commands.  First, ask your system administrator to clean them out.  
+  The tests may fail with messages like "The socket name is already in use",
+  but HDF5 does not use sockets.  This failure is due to problems with the
+  poe command trying to set up the debug socket.  To resolve this problem,
+  check to see whether there are many old /tmp/s.pedb.* files staying around.
+  These are sockets used by the poe command and left behind due to failed
+  commands.  First, ask your system administrator to clean them out.
   Lastly, request IBM to provide a means to run poe without the debug socket.
 
 * The --enable-static-exec configure flag fails to compile for Solaris
-  platforms. This is due to the fact that not all of the system libraries on 
+  platforms. This is due to the fact that not all of the system libraries on
   Solaris are available in a static format.
 
   The --enable-static-exec configure flag also fails to correctly compile
-  on IBM SP2 platforms for serial mode. The parallel mode works fine with 
+  on IBM SP2 platforms for serial mode. The parallel mode works fine with
   this option.
-  
+
   It is suggested that you do not use this option on these platforms
   during configuration.
 
-* There is also a configure error on Altix machines that incorrectly reports 
+* There is also a configure error on Altix machines that incorrectly reports
   when a version of Szip without an encoder is being used.
 
 * Information about building with PGI and Intel compilers is available in
   the INSTALL file sections 4.7 and 4.8.
 
 
-%%%%1.8.2%%%%   
- 
+%%%%1.8.2%%%%
+
 
 HDF5 version 1.8.2 released on Mon Nov 10 15:43:09 CST 2008
 ================================================================================
@@ -10648,9 +10648,9 @@ HDF5 version 1.8.2 released on Mon Nov 10 15:43:09 CST 2008
 INTRODUCTION
 ============
 
-This document describes the differences between HDF5-1.8.1 and HDF5 1.8.2, 
-and contains information on the platforms tested and known problems in 
-HDF5-1.8.2. For more details, see the files HISTORY-1_0-1_8_0_rc3.txt 
+This document describes the differences between HDF5-1.8.1 and HDF5 1.8.2,
+and contains information on the platforms tested and known problems in
+HDF5-1.8.2. For more details, see the files HISTORY-1_0-1_8_0_rc3.txt
 and HISTORY-1_8.txt in the release_docs/ directory of the HDF5 source.
 
 Links to the HDF5 1.8.2 source code, documentation, and additional materials
@@ -10662,18 +10662,18 @@ The HDF5 1.8.2 release can be obtained from:
 
      http://www.hdfgroup.org/HDF5/release/obtain5.html
 
-User documentation for 1.8.2 can be accessed directly at this location: 
+User documentation for 1.8.2 can be accessed directly at this location:
 
      http://www.hdfgroup.org/HDF5/doc/
 
-New features in the HDF5-1.8.x release series, including brief general 
-descriptions of some new and modified APIs, are described in the "What's New 
+New features in the HDF5-1.8.x release series, including brief general
+descriptions of some new and modified APIs, are described in the "What's New
 in 1.8.0?" document:
 
      http://www.hdfgroup.org/HDF5/doc/ADGuide/WhatsNew180.html
 
-All new and modified APIs are listed in detail in the "HDF5 Software Changes 
-from Release to Release" document, in the section "Release 1.8.2 (current 
+All new and modified APIs are listed in detail in the "HDF5 Software Changes
+from Release to Release" document, in the section "Release 1.8.2 (current
 release) versus Release 1.8.1":
 
      http://www.hdfgroup.org/HDF5/doc/ADGuide/Changes.html
@@ -10714,41 +10714,41 @@ New Features
 
         Tools
         -----
-        - h5repack: added new options -u and -b to add a userblock to an HDF5 
+        - h5repack: added new options -u and -b to add a userblock to an HDF5
           file during the repack.  (PVN - 2008/08/26)
-        - h5repack: added options -t and -a to call H5Pset_alignment while 
+        - h5repack: added options -t and -a to call H5Pset_alignment while
           creating a repacked file. (PVN - 2008/08/29)
         - h5ls: added capability to traverse through external links when the -r
           (recursive) flag is given. (NAF - 2008/09/16)
-        - h5ls: added -E option to enable traversal of external links.  
+        - h5ls: added -E option to enable traversal of external links.
           h5ls will not traverse external links without this flag being set.
             (NAF - 2008/10/06)
-        - h5dump: when -b flag is used without a keyword after it, binary 
-          output defaults to NATIVE. MEMORY keyword was deprecated 
+        - h5dump: when -b flag is used without a keyword after it, binary
+          output defaults to NATIVE. MEMORY keyword was deprecated
           and replaced by NATIVE keyword. (PVN - 2008/10/30)
-        - h5diff: returns 1 when file graphs differ by any object.  
+        - h5diff: returns 1 when file graphs differ by any object.
           Error return code was changed to 2 from -1.  (PVN - 2008/10/30)
-        - h5import: TEXTFPE (scientific format) was deprecated. Use TEXTFP 
+        - h5import: TEXTFPE (scientific format) was deprecated. Use TEXTFP
           instead (PVN - 2008/10/30)
 
 
 
         F90 API
         ------
-         - Added optional parameter 'mounted' to H5Gget_info_f, 
+         - Added optional parameter 'mounted' to H5Gget_info_f,
            H5Gget_info_by_idx_f, H5Gget_info_by_name_f (MSB - 2008/09/24)
 	 - Added H5Tget_native_type_f (MSB - 2008/09/30)
-	 
-	 
+
+
         C++ API
         ------
         - These member functions were added as wrapper for H5Rdereference to
           replace the incorrect IdComponent::dereference().
-             void H5Object::dereference(H5Object& obj, void* ref, 
+             void H5Object::dereference(H5Object& obj, void* ref,
                                         H5R_type_t ref_type=H5R_OBJECT)
-             void H5Object::dereference(H5File& h5file, void* ref, 
+             void H5Object::dereference(H5File& h5file, void* ref,
                                         H5R_type_t ref_type=H5R_OBJECT)
-             void H5Object::dereference(Attribute& obj, void* ref, 
+             void H5Object::dereference(Attribute& obj, void* ref,
                                         H5R_type_t ref_type=H5R_OBJECT)
 
           In addition, these constructors were added to create the associated
@@ -10773,13 +10773,13 @@ Support for New Platforms, Languages, and Compilers
           disables the build of shared libraries (i.e., only
           static C and C++ HDF5 libraries will be built
           along with the static HDF5 Fortran library).
-          Intel 10.1 C and C++ compilers require 
+          Intel 10.1 C and C++ compilers require
           "-no-multibyte-chars" compilation flag due to the known
           bug in the compilers.
             (EIP - 2008/10/30)
 
 
-Bug Fixes since HDF5-1.8.1 
+Bug Fixes since HDF5-1.8.1
 ==========================
 
         Configuration
@@ -10810,9 +10810,9 @@ Bug Fixes since HDF5-1.8.1
             (NAF - 2008/10/06)
         - Fixed potential memory leak during compound conversion.
             (NAF - 2008/10/06)
-        - Changed the return value of H5Fget_obj_count from INT to SSIZE_T. 
-            Also changed the return value of H5Fget_obj_ids from HERR_T to 
-            SSIZE_T and the type of the parameter MAX_OBJS from INT to SIZE_T. 
+        - Changed the return value of H5Fget_obj_count from INT to SSIZE_T.
+            Also changed the return value of H5Fget_obj_ids from HERR_T to
+            SSIZE_T and the type of the parameter MAX_OBJS from INT to SIZE_T.
             (SLU - 2008/09/26)
         - Fixed an issue that could cause data to be improperly overwritten
             during compound type conversion.  (NAF - 2008/09/19)
@@ -10827,23 +10827,23 @@ Bug Fixes since HDF5-1.8.1
             (NAF - 2008/08/08)
         - Fixed an issue where mount point traversal would fail when using
             multiple handles for the child.  (NAF - 2008/08/07)
-        - Fixed an issue where mount points were inaccessible when using 
-            multiple file handles for the parent. The mount table is now in 
-            the shared file structure (the parent pointer is still in the 
+        - Fixed an issue where mount points were inaccessible when using
+            multiple file handles for the parent. The mount table is now in
+            the shared file structure (the parent pointer is still in the
             top structure).  (NAF - 2008/08/07)
         - Fixed assertion failure caused by incorrect array datatype version.
             (NAF - 2008/08/04)
         - Fixed issue where a group could have a file mounted on it twice.
             (QAK - 2008/07/15)
-        - When an attribute was opened twice and data was written with 
-            one of the handles, the file didn't have the data. It happened 
-            because each handle had its own object structure, and the empty 
-            one overwrote the data with fill value.  This is fixed by making 
-            some attribute information like the data be shared in the 
+        - When an attribute was opened twice and data was written with
+            one of the handles, the file didn't have the data. It happened
+            because each handle had its own object structure, and the empty
+            one overwrote the data with fill value.  This is fixed by making
+            some attribute information like the data be shared in the
             attribute structure.  (SLU - 2008/07/07)
-        - Fixed a Windows-specific issue in the ohdr test which was causing 
-            users in some timezones to get false errors. This a deficiency in 
-            the Windows mktime() function, and has been handled properly.  
+        - Fixed a Windows-specific issue in the ohdr test which was causing
+            users in some timezones to get false errors. This a deficiency in
+            the Windows mktime() function, and has been handled properly.
             (SJW  - 2008/06/19)
 
         Parallel Library
@@ -10861,46 +10861,46 @@ Bug Fixes since HDF5-1.8.1
           (see bug #1253) (VC- 2008/10/13)
         - Fixed bug in h5ls that prevented relative group listings (like
             "h5ls foo.h5/bar") from working correctly (QAK - 2008/06/03)
-        - h5dump: when doing binary output (-b), the stdout printing of 
-             attributes was done incorrectly. Removed printing of attributes 
+        - h5dump: when doing binary output (-b), the stdout printing of
+             attributes was done incorrectly. Removed printing of attributes
              when doing binary output. (PVN - 2008/06/05)
 
 
         F90 API
         ------
-        - h5sselect_elements_f: Added additional operators H5S_SELECT_APPEND 
+        - h5sselect_elements_f: Added additional operators H5S_SELECT_APPEND
             and H5S_SELECT_PREPEND (MSB - 2008/09/30)
-	- h5sget_select_elem_pointlist: Fixed list of returned points by 
-            rearranging the point list correctly by accounting for C 
+	- h5sget_select_elem_pointlist: Fixed list of returned points by
+            rearranging the point list correctly by accounting for C
             conventions. (MSB - 2008/09/30)
-        - h5sget_select_hyper_blocklist_f: Fixed error in transposed dimension 
+        - h5sget_select_hyper_blocklist_f: Fixed error in transposed dimension
             of arrays.(MSB - 2008/9/30)
-        - h5sget_select_bounds_f: Swapped array bounds to account for C and 
+        - h5sget_select_bounds_f: Swapped array bounds to account for C and
             Fortran reversed array notation (MSB - 2008/9/30)
-	- Changed to initializing string to a blank character instead of a 
-            null type in tH5P.f90 to fix compiling error using AIX 5.3.0 
+	- Changed to initializing string to a blank character instead of a
+            null type in tH5P.f90 to fix compiling error using AIX 5.3.0
             (MSB - 2008/7/29)
-        - Fixed missing commas in H5test_kind.f90 detected by NAG compiler 
+        - Fixed missing commas in H5test_kind.f90 detected by NAG compiler
             (MSB - 2008/7/29)
-        - Fixed passing and array to a scalar in tH5A_1_8.f90 detected by 
+        - Fixed passing and array to a scalar in tH5A_1_8.f90 detected by
             NAG compiler (MSB - 2008/7/29)
-	- Added the ability of the test programs to use the status of 
-            HDF5_NOCLEANUP to determine if the *.h5 files should be removed 
+	- Added the ability of the test programs to use the status of
+            HDF5_NOCLEANUP to determine if the *.h5 files should be removed
             or not after the tests are completed (MSB - 2008/10/1)
 	- In nh5tget_offset_c: (MSB 9/12/2008)
-           If offset was equal to 0 it returned the error code of -1, 
-           this was changed to return an error code of -1 when the offset 
+           If offset was equal to 0 it returned the error code of -1,
+           this was changed to return an error code of -1 when the offset
            value is < 0.
-        - Uses intrinsic Fortran function SIZEOF if available when detecting 
+        - Uses intrinsic Fortran function SIZEOF if available when detecting
            type of INTEGERs and REALs in H5test_kind.f90 (MSB - 2008/9/3)
-        - Put the DOUBLE PRECISION interfaces in a separate module and 
-           added a USE statement for the module. The interfaces are 
+        - Put the DOUBLE PRECISION interfaces in a separate module and
+           added a USE statement for the module. The interfaces are
            included/excluded depending on the state of FORTRAN_DEFAULT_REAL
            is DBLE_F which detects if the default REAL is DOUBLE PRECISION.
-           This allows the library to be compiled with -r8 Fortran flag 
-           without the user needing to edit the source code. 
+           This allows the library to be compiled with -r8 Fortran flag
+           without the user needing to edit the source code.
            (MSB - 200/8/27)
-        - Enable building shared library for fortran by adding the flag -fPIC 
+        - Enable building shared library for fortran by adding the flag -fPIC
           to the compile flags for versions of Intel Fortran compiler >=9
            (MSB  - 2008/8/26)
 
@@ -10946,7 +10946,7 @@ The following platforms and compilers have been tested for this release.
                                   gfortran 4.2.5 20080702
 
     IRIX64 6.5 (64 & n32)         MIPSpro cc 7.4.4m
-                                  F90 MIPSpro 7.4.4m 
+                                  F90 MIPSpro 7.4.4m
                                   C++ MIPSpro cc 7.4.4m
 
     Linux 2.6.9-42.0.10.ELsmp #1  gcc (GCC) 3.4.6
@@ -10964,9 +10964,9 @@ The following platforms and compilers have been tested for this release.
                                   MPICH mpich2-1.0.6p1 compiled with
                                   gcc 3.4.6 and G95 (GCC 4.0.3 (g95 0.92!)
 
-    Linux 2.6.16.46-0.14-smp #1   Intel(R) C++ for Intel(R) EM64T 
+    Linux 2.6.16.46-0.14-smp #1   Intel(R) C++ for Intel(R) EM64T
     SMP x86_64 GNU/Linux          Ver.  10.1.013
-    (smirom)                      Intel(R) Fortran Intel(R) EM64T 
+    (smirom)                      Intel(R) Fortran Intel(R) EM64T
                                   Ver.  10.1.013
                                   PGI C, Fortran, C++ Version 7.2-1
                                          for 64-bit target on x86-64
@@ -10990,7 +10990,7 @@ The following platforms and compilers have been tested for this release.
                                   Intel(R) Fortran Compiler Version 10.0.026
                                   Open MPI 1.2.2
                                   MVAPICH2-0.9.8p28p2patched-intel-ofed-1.2
-                                  compiled with icc v10.0.026 and 
+                                  compiled with icc v10.0.026 and
                                   ifort 10.0.026
 
     IA-64 Linux 2.4.21-309.tg1 #1 SMP
@@ -11017,7 +11017,7 @@ The following platforms and compilers have been tested for this release.
                                   GNU Fortran (GCC) 4.3.0 20070810
                                   G95 (GCC 4.0.3 (g95 0.91!) Apr 24 2008)
                                   Intel C, C++ and Fortran compilers 10.1
-                                  
+
 
 Supported Configuration Features Summary
 ========================================
@@ -11028,7 +11028,7 @@ Supported Configuration Features Summary
           x   = not working in this release
           dna = does not apply
           ( ) = footnote appears below second table
-          <blank> = testing incomplete on this feature or platform 
+          <blank> = testing incomplete on this feature or platform
 
 Platform                 C        F90    F90      C++   zlib  SZIP
                          parallel        parallel
@@ -11041,7 +11041,7 @@ Windows XP x64           n        y(15)  n(15)    y     y     y
 Windows Vista            n        n      n        y     y     y
 Mac OS X 10.5 Intel      n        y      n        y     y     y
 AIX 5.3 32- and 64-bit   n        y      n        y     y     n
-FreeBSD 6.3-STABLE 
+FreeBSD 6.3-STABLE
 32&64 bit                n        y      n        y     y     y
 RedHat EL4       (3)  W  y(1)     y(10)  y(1)     y     y     y
 RedHat EL4 Intel (3)  W  n        y      n        y     y     n
@@ -11049,49 +11049,49 @@ RedHat EL4 PGI   (3)  W  n        y      n        y     y     n
 SuSe x86_64 gcc(3,12) W  y(2)     y(11)  y(2)     y     y     y
 SuSe x86_64 Int(3,12) W  n        y(13)  n        y     y     n
 SuSe x86_64 PGI(3,12) W  n        y(8)   n        y     y     y
-Linux 2.6 SuSE ia64   C 
+Linux 2.6 SuSE ia64   C
     Intel       (3,7)    y        y      y        y     y     n
-Linux 2.6 SGI Altix 
+Linux 2.6 SGI Altix
     ia64 Intel    (3)    y        y      y        y     y     y
 Linux 2.6 RHEL        C
     Lustre Intel  (5)    y(4)     y      y(4)     y     y     n
 Cray XT3 2.0.41          y        y      y        y     y     n
 
 
-Platform                 Shared  Shared    Shared    Thread-  
-                         C libs  F90 libs  C++ libs  safe     
-Solaris2.10 32-bit       y       y         y         y        
-Solaris2.10 64-bit       y       y         y         y        
-IRIX64_6.5 32-bit        y       dna       y         y        
-IRIX64_6.5 64-bit        y       y         n         y        
-Windows XP               y       y(15)     y         y        
-Windows XP x64           y       y(15)     y         y        
-Windows Vista            y       n         n         y        
-Mac OS X 10.5            y       n         y         n        
-AIX 5.3 32- and 64-bit   n       n         n         n        
-FreeBSD 6.2 32&64 bit    y       n         y         y        
-RedHat EL4       (3)  W  y       y(10)     y         y        
-RedHat EL4 Intel (3)  W  y       y         y         n        
-RedHat EL4 PGI   (3)  W  y       y         y         n        
-SuSe x86_64 GNU(3,12) W  y       y         y         y        
-SuSe x86_64 Int(3,12) W  y       y         y         n        
-SuSe x86_64 PGI(3,12) W  y       y         y         n        
+Platform                 Shared  Shared    Shared    Thread-
+                         C libs  F90 libs  C++ libs  safe
+Solaris2.10 32-bit       y       y         y         y
+Solaris2.10 64-bit       y       y         y         y
+IRIX64_6.5 32-bit        y       dna       y         y
+IRIX64_6.5 64-bit        y       y         n         y
+Windows XP               y       y(15)     y         y
+Windows XP x64           y       y(15)     y         y
+Windows Vista            y       n         n         y
+Mac OS X 10.5            y       n         y         n
+AIX 5.3 32- and 64-bit   n       n         n         n
+FreeBSD 6.2 32&64 bit    y       n         y         y
+RedHat EL4       (3)  W  y       y(10)     y         y
+RedHat EL4 Intel (3)  W  y       y         y         n
+RedHat EL4 PGI   (3)  W  y       y         y         n
+SuSe x86_64 GNU(3,12) W  y       y         y         y
+SuSe x86_64 Int(3,12) W  y       y         y         n
+SuSe x86_64 PGI(3,12) W  y       y         y         n
 Linux 2.4 SuSE        C
-    ia64 C Intel (7)     y       y         y         n        
+    ia64 C Intel (7)     y       y         y         n
 Linux 2.4 SGI Altix   C
-    ia64 Intel           y                           n        
+    ia64 Intel           y                           n
 Linux 2.6 RHEL        C
     Lustre Intel (5)     y       y         y         n
 Cray XT3 2.0.41          n       n         n         n
 
     Notes: (1)  Using mpich2 1.0.6.
            (2)  Using mpich2 1.0.7.
-           (3)  Linux 2.6 with GNU, Intel, and PGI compilers, as indicated.  
+           (3)  Linux 2.6 with GNU, Intel, and PGI compilers, as indicated.
                   W or C indicates workstation or cluster, respectively.
            (4)  Using mvapich2 0.9.8.
-           (5)  Linux 2.6.9-42.0.10.  Xeon cluster with ELsmp_perfctr_lustre 
+           (5)  Linux 2.6.9-42.0.10.  Xeon cluster with ELsmp_perfctr_lustre
                   and Intel compilers
-           (6)  Linux 2.4.21-32.0.1.  Xeon cluster with ELsmp_perfctr_lustre 
+           (6)  Linux 2.4.21-32.0.1.  Xeon cluster with ELsmp_perfctr_lustre
                   and Intel compilers
            (7)  Linux 2.4.21, SuSE_292.till.  Ia64 cluster with Intel compilers
            (8)  pgf90
@@ -11145,17 +11145,17 @@ Known Problems
   Storm" in file INSTALL_parallel for a way to deal with this problem.
   AKC - 2008/05/28
 
-* We have discovered two problems when running collective IO parallel HDF5 
-  tests with chunking storage on the ChaMPIon MPI compiler on tungsten, a 
+* We have discovered two problems when running collective IO parallel HDF5
+  tests with chunking storage on the ChaMPIon MPI compiler on tungsten, a
   Linux cluster at NCSA.
 
-  Under some complex selection cases: 
+  Under some complex selection cases:
   1) MPI_Get_element returns the wrong value.
-  2) MPI_Type_struct also generates the wrong derived datatype and corrupt 
+  2) MPI_Type_struct also generates the wrong derived datatype and corrupt
      data may be generated.
-  These issues arise only when turning on collective IO with chunking storage 
-  with some complex selections. We have not found these problems on other 
-  MPI-IO compilers. If you encounter these problems, you may use independent 
+  These issues arise only when turning on collective IO with chunking storage
+  with some complex selections. We have not found these problems on other
+  MPI-IO compilers. If you encounter these problems, you may use independent
   IO instead.
 
   To avoid this behavior, change the following line in your code
@@ -11165,33 +11165,33 @@ Known Problems
 
   KY - 2007/08/24
 
-* On Intel 64 Linux cluster (RH 4, Linux 2.6.9) with Intel 10.0 compilers, 
-  use -mp -O1 compilation flags to build the libraries. A higher level of 
-  optimization causes failures in several HDF5 library tests. 
+* On Intel 64 Linux cluster (RH 4, Linux 2.6.9) with Intel 10.0 compilers,
+  use -mp -O1 compilation flags to build the libraries. A higher level of
+  optimization causes failures in several HDF5 library tests.
 
-* For LLNL, uP: both serial and parallel tests pass.  
+* For LLNL, uP: both serial and parallel tests pass.
   Zeus: Serial tests pass but parallel tests fail with a known problem in MPI.
-  ubgl: Serial tests pass but parallel tests fail. 
+  ubgl: Serial tests pass but parallel tests fail.
 
-* On mpich 1.2.5 and 1.2.6, if more than two processes contribute no IO and 
-  the application asks to do collective IO, we have found that when using 4 
-  processors, a simple collective write will sometimes be hung. This can be 
+* On mpich 1.2.5 and 1.2.6, if more than two processes contribute no IO and
+  the application asks to do collective IO, we have found that when using 4
+  processors, a simple collective write will sometimes be hung. This can be
   verified with t_mpi test under testpar.
 
 * On IRIX6.5, when the C compiler version is greater than 7.4, complicated
   MPI derived datatype code will work. However, the user should increase
-  the value of the MPI_TYPE_MAX environment variable to some appropriate value 
-  to use collective irregular selection code.  For example, the current 
-  parallel HDF5 test needs to raise MPI_TYPE_MAX to 200,000 to pass the test. 
+  the value of the MPI_TYPE_MAX environment variable to some appropriate value
+  to use collective irregular selection code.  For example, the current
+  parallel HDF5 test needs to raise MPI_TYPE_MAX to 200,000 to pass the test.
 
-* A dataset created or rewritten with a v1.6.3 library or after cannot be read 
+* A dataset created or rewritten with a v1.6.3 library or after cannot be read
   with the v1.6.2 library or before when the Fletcher32 EDC filter is enabled.
-  There was a bug in the calculation of the Fletcher32 checksum in the 
+  There was a bug in the calculation of the Fletcher32 checksum in the
   library before v1.6.3; the checksum value was not consistent between big-
-  endian and little-endian systems.  This bug was fixed in Release 1.6.3.  
-  However, after fixing the bug, the checksum value was no longer the same as 
-  before on little-endian system.  Library releases after 1.6.4 can still read 
-  datasets created or rewritten with an HDF5 library of v1.6.2 or before.  
+  endian and little-endian systems.  This bug was fixed in Release 1.6.3.
+  However, after fixing the bug, the checksum value was no longer the same as
+  before on little-endian system.  Library releases after 1.6.4 can still read
+  datasets created or rewritten with an HDF5 library of v1.6.2 or before.
   SLU - 2005/6/30
 
 * On IBM AIX systems, parallel HDF5 mode will fail some tests with error
@@ -11199,26 +11199,26 @@ Known Problems
   Set the environment variable MP_INFOLEVEL to 0 to minimize the messages
   and run the tests again.
 
-  The tests may fail with messages like "The socket name is already in use",  
-  but HDF5 does not use sockets.  This failure is due to problems with the 
-  poe command trying to set up the debug socket.  To resolve this problem, 
-  check to see whether there are many old /tmp/s.pedb.* files staying around.  
-  These are sockets used by the poe command and left behind due to failed 
-  commands.  First, ask your system administrator to clean them out.  
+  The tests may fail with messages like "The socket name is already in use",
+  but HDF5 does not use sockets.  This failure is due to problems with the
+  poe command trying to set up the debug socket.  To resolve this problem,
+  check to see whether there are many old /tmp/s.pedb.* files staying around.
+  These are sockets used by the poe command and left behind due to failed
+  commands.  First, ask your system administrator to clean them out.
   Lastly, request IBM to provide a means to run poe without the debug socket.
 
 * The --enable-static-exec configure flag fails to compile for Solaris
-  platforms. This is due to the fact that not all of the system libraries on 
+  platforms. This is due to the fact that not all of the system libraries on
   Solaris are available in a static format.
 
   The --enable-static-exec configure flag also fails to correctly compile
-  on IBM SP2 platforms for serial mode. The parallel mode works fine with 
+  on IBM SP2 platforms for serial mode. The parallel mode works fine with
   this option.
-  
+
   It is suggested that you do not use this option on these platforms
   during configuration.
 
-* There is also a configure error on Altix machines that incorrectly reports 
+* There is also a configure error on Altix machines that incorrectly reports
   when a version of Szip without an encoder is being used.
 
 * Information about building with PGI and Intel compilers is available in
@@ -11227,7 +11227,7 @@ Known Problems
 
 
 
-%%%%1.8.1%%%%   
+%%%%1.8.1%%%%
 
 
 HDF5 version 1.8.1 released on Thu May 29 15:28:55 CDT 2008
@@ -11236,10 +11236,10 @@ HDF5 version 1.8.1 released on Thu May 29 15:28:55 CDT 2008
 INTRODUCTION
 ============
 
-This document describes the differences between the HDF5-1.8.1 release 
-and HDF5 1.8.0, and contains information on the platforms tested and known 
+This document describes the differences between the HDF5-1.8.1 release
+and HDF5 1.8.0, and contains information on the platforms tested and known
 problems in HDF5-1.8.1.  For more details, see the files
-HISTORY-1_0-1_8_0_rc3.txt and HISTORY-1_8.txt in the release_docs/ directory 
+HISTORY-1_0-1_8_0_rc3.txt and HISTORY-1_8.txt in the release_docs/ directory
 of the HDF5 source.
 
 Links to the HDF5 1.8.1 source code, documentation, and additional materials
@@ -11251,18 +11251,18 @@ The HDF5 1.8.1 release can be obtained from:
 
      http://www.hdfgroup.org/HDF5/release/obtain5.html
 
-User documentation for 1.8.1 can be accessed directly at this location: 
+User documentation for 1.8.1 can be accessed directly at this location:
 
      http://www.hdfgroup.org/HDF5/doc/
 
-New features in the HDF5-1.8.x release series, including brief general 
-descriptions of some new and modified APIs, are described in the "What's New 
+New features in the HDF5-1.8.x release series, including brief general
+descriptions of some new and modified APIs, are described in the "What's New
 in 1.8.0?" document:
 
      http://www.hdfgroup.org/HDF5/doc/ADGuide/WhatsNew180.html
 
-All new and modified APIs are listed in detail in the "HDF5 Software Changes 
-from Release to Release" document, in the section "Release 1.8.1 (current 
+All new and modified APIs are listed in detail in the "HDF5 Software Changes
+from Release to Release" document, in the section "Release 1.8.1 (current
 release) versus Release 1.8.0":
 
      http://www.hdfgroup.org/HDF5/doc/ADGuide/Changes.html
@@ -11291,12 +11291,12 @@ New Features
         - The lib/libhdf5.settings file contains much more configure
           information. (AKC - 2008/05/18)
 
-        - The new configure option "--disable-sharedlib-rpath" disables 
-          embedding the '-Wl,-rpath' information into executables when 
-          shared libraries are produced, and instead solely relies on the 
+        - The new configure option "--disable-sharedlib-rpath" disables
+          embedding the '-Wl,-rpath' information into executables when
+          shared libraries are produced, and instead solely relies on the
           information in LD_LIBRARY_PATH. (MAM - 2008/05/15)
 
-        - Configuration suite now uses Autoconf 2.61, Automake 1.10.1, and 
+        - Configuration suite now uses Autoconf 2.61, Automake 1.10.1, and
           Libtool 2.2.2 (MAM - 2008/05/01)
 
         Source code distribution
@@ -11312,24 +11312,24 @@ New Features
 
         Tools
         -----
-        - h5repack: Reinstated the -i and -o command line flags to specify 
+        - h5repack: Reinstated the -i and -o command line flags to specify
           input and output files.  h5repack now understands both the old
           syntax (with -i and -o) and the new syntax introduced in Release
           1.8.0.  (PVN - 2008/05/23)
-        - h5dump: Added support for external links, displaying the object that 
+        - h5dump: Added support for external links, displaying the object that
           an external link points to. (PVN - 2008/05/12)
-        - h5dump: Added an option, -m, to allow user-defined formatting in the 
+        - h5dump: Added an option, -m, to allow user-defined formatting in the
           output of floating point numbers. (PVN - 2008/05/06)
-        - h5dump, in output of the -p option: Added effective data compression 
-          ratio to the dataset storage layout output when a compression filter 
+        - h5dump, in output of the -p option: Added effective data compression
+          ratio to the dataset storage layout output when a compression filter
           has been applied to a dataset.  (PVN - 2008/05/01)
 
         F90 API
         ------
         New H5A, H5G, H5L, H5O, and H5P APIs to enable 1.8 features were
-        added. See "Release 1.8.1 (current release) versus Release 1.8.0" in 
+        added. See "Release 1.8.1 (current release) versus Release 1.8.0" in
         the document "HDF5 Software Changes from Release to Release"
-        (http://hdfgroup.org/HDF5/doc/ADGuide/Changes.html) for the 
+        (http://hdfgroup.org/HDF5/doc/ADGuide/Changes.html) for the
         complete list of the new APIs.
 
         C++ API
@@ -11339,15 +11339,15 @@ New Features
 
 Support for New Platforms, Languages, and Compilers
 ===================================================
-        - Both serial and parallel HDF5 are supported for the Red Storm machine 
+        - Both serial and parallel HDF5 are supported for the Red Storm machine
           which is a Cray XT3 system.
 
-        - The Fortran library will work correctly if compiled with the -i8 
-          flag.  This has been tested with the g95, PGI and Intel Fortran 
+        - The Fortran library will work correctly if compiled with the -i8
+          flag.  This has been tested with the g95, PGI and Intel Fortran
           compilers.
 
 
-Bug Fixes since HDF5-1.8.0 
+Bug Fixes since HDF5-1.8.0
 ==========================
 
         Configuration
@@ -11359,12 +11359,12 @@ Bug Fixes since HDF5-1.8.0
 
         Library
         -------
-        - Chunking:  Chunks greater than 4GB are disallowed. 
+        - Chunking:  Chunks greater than 4GB are disallowed.
           (QAK - 2008/05/16)
-        - Fixed the problem with searching for a target file when following 
-          an external link.  The search pattern will depend on whether the 
-          target file's pathname is an absolute or a relative path. 
-          Please see the H5Lcreate_external description in the "HDF5 
+        - Fixed the problem with searching for a target file when following
+          an external link.  The search pattern will depend on whether the
+          target file's pathname is an absolute or a relative path.
+          Please see the H5Lcreate_external description in the "HDF5
           Reference Manual" (http://hdfgroup.org/HDF5/doc/RM/RM_H5L.html).
           (VC - 2008/04/08)
         - Fixed possible file corruption bug when encoding datatype
@@ -11372,7 +11372,7 @@ Bug Fixes since HDF5-1.8.0
           256 and 511 bytes and the file was opened with the "use the
           latest format" property enabled (with H5Pset_libver_bounds).
           (QAK - 2008/03/13)
-        - Fixed bug in H5Aget_num_attrs() routine to correctly handle an 
+        - Fixed bug in H5Aget_num_attrs() routine to correctly handle an
           invalid location identifier.  (QAK - 2008/03/11)
 
         Parallel Library
@@ -11384,13 +11384,13 @@ Bug Fixes since HDF5-1.8.0
         - Fixed bug in h5diff that prevented datasets and attributes with
           variable-length string elements from comparing correctly.
           (QAK - 2008/02/28)
-        - Fixed bug in h5dump that caused binary output to be made only for 
+        - Fixed bug in h5dump that caused binary output to be made only for
           the first dataset, when several datasets were requested.
           (PVN - 2008/04/07)
 
         F90 API
         ------
-        - The h5tset(get)_fields subroutines were missing the parameter to 
+        - The h5tset(get)_fields subroutines were missing the parameter to
           specify a sign position; fixed.  (EIP - 2008/05/23)
         - Many APIs were fixed to work with the 8-byte integers in Fortran vs.
           4-byte integers in C. This change is trasparent to user applications.
@@ -11439,7 +11439,7 @@ The following platforms and compilers have been tested for this release.
                                   gfortran 4.2.1 20080123
 
     IRIX64 6.5 (64 & n32)         MIPSpro cc 7.4.4m
-                                  F90 MIPSpro 7.4.4m 
+                                  F90 MIPSpro 7.4.4m
                                   C++ MIPSpro cc 7.4.4m
 
     Linux 2.6.9 (RHEL4)           Intel 10.0 compilers
@@ -11448,26 +11448,26 @@ The following platforms and compilers have been tested for this release.
     Linux 2.4.21-47               gcc 3.2.3 20030502
     (osage)
 
-    Linux 2.6.9-42.0.10           gcc,g++ 3.4.6 20060404, G95 (GCC 4.0.3) 
+    Linux 2.6.9-42.0.10           gcc,g++ 3.4.6 20060404, G95 (GCC 4.0.3)
     (kagiso)                      PGI 7.1-6 (pgcc, pgf90, pgCC)
                                   Intel 9.1 (icc, ifort, icpc)
 
-    Linux 2.6.16.27 x86_64 AMD    gcc 4.1.0 (SuSE Linux), g++ 4.1.0, 
+    Linux 2.6.16.27 x86_64 AMD    gcc 4.1.0 (SuSE Linux), g++ 4.1.0,
     (smirom)                          g95 (GCC 4.0.3)
                                   PGI 7.1-6 (pgcc, pgf90, pgCC)
                                   Intel 9.1 (icc, ifort, icpc)
 
     Linux 2.6.5-7.252.1-rtgfx #1  Intel(R) C++ Version 9.0
-          SMP ia64                Intel(R) Fortran Itanium(R) Version 9.0 
+          SMP ia64                Intel(R) Fortran Itanium(R) Version 9.0
     (cobalt)                      SGI MPI
 
     SunOS 5.8 32,46               Sun WorkShop 6 update 2 C 5.3
      (Solaris 2.8)                Sun WorkShop 6 update 2 Fortran 95 6.2
                                   Sun WorkShop 6 update 2 C++ 5.3
 
-    SunOS 5.10                    cc: Sun C 5.8 
-    (linew)                       f90: Sun Fortran 95 8.2 
-                                  CC: Sun C++ 5.8 
+    SunOS 5.10                    cc: Sun C 5.8
+    (linew)                       f90: Sun Fortran 95 8.2
+                                  CC: Sun C++ 5.8
 
     Xeon Linux 2.4.21-32.0.1.ELsmp-perfctr-lustre
     (tungsten)                    gcc 3.2.2 20030222
@@ -11509,7 +11509,7 @@ Supported Configuration Features Summary
           x   = not working in this release
           dna = does not apply
           ( ) = footnote appears below second table
-          <blank> = testing incomplete on this feature or platform 
+          <blank> = testing incomplete on this feature or platform
 
 Platform                 C        F90    F90      C++   zlib  SZIP
                          parallel        parallel
@@ -11528,52 +11528,52 @@ RedHat EL3  W PGI   (3)  n        y      n        y     y     n
 SuSe x86_64 gcc  (3,12)  y(2)     y(11)  y(2)     y     y     y
 SuSe x86_64 Int  (3,12)  n        y(13)  n        y     y     n
 SuSe x86_64 PGI  (3,12)  n        y(8)   n        y     y     y
-Linux 2.4 Xeon C 
+Linux 2.4 Xeon C
     Lustre Intel  (3,6)  n        y      n        y     y     n
-Linux 2.6 SuSE ia64 C 
+Linux 2.6 SuSE ia64 C
     Intel         (3,7)  y        y      y        y     y     n
-Linux 2.6 SGI Altix 
+Linux 2.6 SGI Altix
     ia64 Intel      (3)  y        y      y        y     y     y
 Linux 2.6 RHEL C
     Lustre Intel    (5)  y(4)     y      y(4)     y     y     n
 Cray XT3 2.0.41          y        y      y        y     y     n
 
 
-Platform                 Shared  Shared    Shared    Thread-  
-                         C libs  F90 libs  C++ libs  safe     
-Solaris2.10 64-bit       y       y         y         y        
-Solaris2.10 32-bit       y       y         y         y        
-IRIX64_6.5 64-bit        y       y         n         y        
-IRIX64_6.5 32-bit        y       dna       y         y        
-Windows XP               y       y(15)     y         y        
-Windows XP x64           y       y(15)     y         y        
-Windows Vista            y       n         n         y        
-Mac OS X 10.3            y                           n        
-FreeBSD 4.11             y       n         y         y        
-RedHat EL3  W       (3)  y       y(10)     y         y        
-RedHat EL3  W Intel (3)  y       y         y         n        
-RedHat EL3  W PGI   (3)  y       y         y         n        
-SuSe x86_64 W GNU (3,12) y       y         y         y        
-SuSe x86_64 W Int (3,12) y       y         y         n        
-SuSe x86_64 W PGI (3,12) y       y         y         n        
-Linux 2.4 Xeon C 
-    Lustre Intel    (6)  y       y         y         n        
-Linux 2.4 SuSE 
-    ia64 C Intel    (7)  y       y         y         n        
-Linux 2.4 SGI Altix 
-    ia64 Intel           y                           n        
+Platform                 Shared  Shared    Shared    Thread-
+                         C libs  F90 libs  C++ libs  safe
+Solaris2.10 64-bit       y       y         y         y
+Solaris2.10 32-bit       y       y         y         y
+IRIX64_6.5 64-bit        y       y         n         y
+IRIX64_6.5 32-bit        y       dna       y         y
+Windows XP               y       y(15)     y         y
+Windows XP x64           y       y(15)     y         y
+Windows Vista            y       n         n         y
+Mac OS X 10.3            y                           n
+FreeBSD 4.11             y       n         y         y
+RedHat EL3  W       (3)  y       y(10)     y         y
+RedHat EL3  W Intel (3)  y       y         y         n
+RedHat EL3  W PGI   (3)  y       y         y         n
+SuSe x86_64 W GNU (3,12) y       y         y         y
+SuSe x86_64 W Int (3,12) y       y         y         n
+SuSe x86_64 W PGI (3,12) y       y         y         n
+Linux 2.4 Xeon C
+    Lustre Intel    (6)  y       y         y         n
+Linux 2.4 SuSE
+    ia64 C Intel    (7)  y       y         y         n
+Linux 2.4 SGI Altix
+    ia64 Intel           y                           n
 Linux 2.6 RHEL C
     Lustre Intel    (5)  y        y        y         n
 Cray XT3 2.0.41          n       n         n         n        n
 
     Notes: (1)  Using mpich2 1.0.6.
            (2)  Using mpich2 1.0.7.
-           (3)  Linux 2.6 with GNU, Intel, and PGI compilers, as indicated.  
+           (3)  Linux 2.6 with GNU, Intel, and PGI compilers, as indicated.
                   W or C indicates workstation or cluster, respectively.
            (4)  Using mvapich2 0.9.8.
-           (5)  Linux 2.6.9-42.0.10.  Xeon cluster with ELsmp_perfctr_lustre 
+           (5)  Linux 2.6.9-42.0.10.  Xeon cluster with ELsmp_perfctr_lustre
                   and Intel compilers
-           (6)  Linux 2.4.21-32.0.1.  Xeon cluster with ELsmp_perfctr_lustre 
+           (6)  Linux 2.4.21-32.0.1.  Xeon cluster with ELsmp_perfctr_lustre
                   and Intel compilers
            (7)  Linux 2.4.21, SuSE_292.till.  Ia64 cluster with Intel compilers
            (8)  pgf90
@@ -11614,17 +11614,17 @@ Known Problems
   ======== end of bypass ========
   AKC - 2008/05/28
 
-* We have discovered two problems when running collective IO parallel HDF5 
-  tests with chunking storage on the ChaMPIon MPI compiler on tungsten, a 
+* We have discovered two problems when running collective IO parallel HDF5
+  tests with chunking storage on the ChaMPIon MPI compiler on tungsten, a
   Linux cluster at NCSA.
 
-  Under some complex selection cases: 
+  Under some complex selection cases:
   1) MPI_Get_element returns the wrong value.
-  2) MPI_Type_struct also generates the wrong derived datatype and corrupt 
+  2) MPI_Type_struct also generates the wrong derived datatype and corrupt
      data may be generated.
-  These issues arise only when turning on collective IO with chunking storage 
-  with some complex selections. We have not found these problems on other 
-  MPI-IO compilers. If you encounter these problems, you may use independent 
+  These issues arise only when turning on collective IO with chunking storage
+  with some complex selections. We have not found these problems on other
+  MPI-IO compilers. If you encounter these problems, you may use independent
   IO instead.
 
   To avoid this behavior, change the following line in your code
@@ -11637,13 +11637,13 @@ Known Problems
 * For SNL, spirit/liberty/thunderbird: The serial tests pass but parallel
   tests failed with MPI-IO file locking message. AKC - 2007/6/25
 
-* On Intel 64 Linux cluster (RH 4, Linux 2.6.9) with Intel 10.0 compilers, 
-  use -mp -O1 compilation flags to build the libraries. A higher level of 
-  optimization causes failures in several HDF5 library tests. 
+* On Intel 64 Linux cluster (RH 4, Linux 2.6.9) with Intel 10.0 compilers,
+  use -mp -O1 compilation flags to build the libraries. A higher level of
+  optimization causes failures in several HDF5 library tests.
 
-* For LLNL, uP: both serial and parallel tests pass.  
+* For LLNL, uP: both serial and parallel tests pass.
   Zeus: Serial tests pass but parallel tests fail with a known problem in MPI.
-  ubgl: Serial tests pass but parallel tests fail. 
+  ubgl: Serial tests pass but parallel tests fail.
 
 * Configuring with --enable-debug=all produces compiler errors on most
   platforms:  Users who want to run HDF5 in debug mode should use
@@ -11651,66 +11651,66 @@ Known Problems
   information on most modules.
 
 * On Mac OS 10.4, test/dt_arith.c has some errors in conversion from long
-  double to (unsigned) long long and from (unsigned) long long to long double. 
+  double to (unsigned) long long and from (unsigned) long long to long double.
 
 * On Altix SGI with Intel 9.0, testmeta.c would not compile with -O3
   optimization flag.
 
-* On VAX, the Scaleoffset filter is not supported.  The Scaleoffset filter 
-  supports only the IEEE standard for floating-point data; it cannot be applied 
-  to HDF5 data generated on VAX. 
+* On VAX, the Scaleoffset filter is not supported.  The Scaleoffset filter
+  supports only the IEEE standard for floating-point data; it cannot be applied
+  to HDF5 data generated on VAX.
 
 * On Cray X1, a lone colon on the command line of h5dump --xml (as in
   the testh5dumpxml.sh script) is misinterpereted by the operating system
   and causes an error.
 
-* On mpich 1.2.5 and 1.2.6, if more than two processes contribute no IO and 
-  the application asks to do collective IO, we have found that when using 4 
-  processors, a simple collective write will sometimes be hung. This can be 
+* On mpich 1.2.5 and 1.2.6, if more than two processes contribute no IO and
+  the application asks to do collective IO, we have found that when using 4
+  processors, a simple collective write will sometimes be hung. This can be
   verified with t_mpi test under testpar.
 
 * On IRIX6.5, when the C compiler version is greater than 7.4, complicated
   MPI derived datatype code will work. However, the user should increase
-  the value of the MPI_TYPE_MAX environment variable to some appropriate value 
-  to use collective irregular selection code.  For example, the current 
-  parallel HDF5 test needs to raise MPI_TYPE_MAX to 200,000 to pass the test. 
+  the value of the MPI_TYPE_MAX environment variable to some appropriate value
+  to use collective irregular selection code.  For example, the current
+  parallel HDF5 test needs to raise MPI_TYPE_MAX to 200,000 to pass the test.
 
-* A dataset created or rewritten with a v1.6.3 library or after cannot be read 
+* A dataset created or rewritten with a v1.6.3 library or after cannot be read
   with the v1.6.2 library or before when the Fletcher32 EDC filter is enabled.
-  There was a bug in the calculation of the Fletcher32 checksum in the 
+  There was a bug in the calculation of the Fletcher32 checksum in the
   library before v1.6.3; the checksum value was not consistent between big-
-  endian and little-endian systems.  This bug was fixed in Release 1.6.3.  
-  However, after fixing the bug, the checksum value was no longer the same as 
-  before on little-endian system.  Library releases after 1.6.4 can still read 
-  datasets created or rewritten with an HDF5 library of v1.6.2 or before.  
+  endian and little-endian systems.  This bug was fixed in Release 1.6.3.
+  However, after fixing the bug, the checksum value was no longer the same as
+  before on little-endian system.  Library releases after 1.6.4 can still read
+  datasets created or rewritten with an HDF5 library of v1.6.2 or before.
   SLU - 2005/6/30
 
-* For version 6 (6.02 and 6.04) of the Portland Group compiler on the AMD 
-  Opteron processor, there is a bug in the compiler for optimization(-O2).  
-  The library failed in several tests, all related to the MULTI driver.  
-  The problem has been reported to the vendor.  
+* For version 6 (6.02 and 6.04) of the Portland Group compiler on the AMD
+  Opteron processor, there is a bug in the compiler for optimization(-O2).
+  The library failed in several tests, all related to the MULTI driver.
+  The problem has been reported to the vendor.
 
 * On IBM AIX systems, parallel HDF5 mode will fail some tests with error
   messages like "INFO: 0031-XXX ...".  This is from the command `poe'.
   Set the environment variable MP_INFOLEVEL to 0 to minimize the messages
   and run the tests again.
 
-  The tests may fail with messages like "The socket name is already in use",  
-  but HDF5 does not use sockets.  This failure is due to problems with the 
-  poe command trying to set up the debug socket.  To resolve this problem, 
-  check to see whether there are many old /tmp/s.pedb.* files staying around.  
-  These are sockets used by the poe command and left behind due to failed 
-  commands.  First, ask your system administrator to clean them out.  
+  The tests may fail with messages like "The socket name is already in use",
+  but HDF5 does not use sockets.  This failure is due to problems with the
+  poe command trying to set up the debug socket.  To resolve this problem,
+  check to see whether there are many old /tmp/s.pedb.* files staying around.
+  These are sockets used by the poe command and left behind due to failed
+  commands.  First, ask your system administrator to clean them out.
   Lastly, request IBM to provide a means to run poe without the debug socket.
 
 * The --enable-static-exec configure flag fails to compile for Solaris
-  platforms. This is due to the fact that not all of the system libraries on 
+  platforms. This is due to the fact that not all of the system libraries on
   Solaris are available in a static format.
 
   The --enable-static-exec configure flag also fails to correctly compile
-  on IBM SP2 platforms for serial mode. The parallel mode works fine with 
+  on IBM SP2 platforms for serial mode. The parallel mode works fine with
   this option.
-  
+
   It is suggested that you do not use this option on these platforms
   during configuration.
 
@@ -11719,7 +11719,7 @@ Known Problems
   able to handle the `long long' datatype with the warning:
 
         warning: ANSI C does not support `long long'
-  
+
   This warning is innocuous and can be safely ignored.
 
 * The ./dsets tests fail on the TFLOPS machine if the test program,
@@ -11731,42 +11731,42 @@ Known Problems
 * Not all platforms behave correctly with Szip's shared libraries. Szip is
   disabled in these cases, and a message is relayed at configure time. Static
   libraries should be working on all systems that support Szip and should be
-  used when shared libraries are unavailable. 
+  used when shared libraries are unavailable.
 
-  There is also a configure error on Altix machines that incorrectly reports 
+  There is also a configure error on Altix machines that incorrectly reports
   when a version of Szip without an encoder is being used.
 
-* On some platforms that use Intel and Absoft compilers to build the HDF5 
-  Fortran library, compilation may fail for fortranlib_test.f90, fflush1.f90 
-  and fflush2.f90 complaining about the exit subroutine. Comment out the line 
+* On some platforms that use Intel and Absoft compilers to build the HDF5
+  Fortran library, compilation may fail for fortranlib_test.f90, fflush1.f90
+  and fflush2.f90 complaining about the exit subroutine. Comment out the line
   IF (total_error .ne. 0) CALL exit (total_error).
 
 * Information about building with PGI and Intel compilers is available in
   the INSTALL file sections 4.7 and 4.8.
 
 * On at least one system, SDSC DataStar, the scheduler (in this case
-  LoadLeveler) sends job status updates to standard error when you run 
+  LoadLeveler) sends job status updates to standard error when you run
   any executable that was compiled with the parallel compilers.
 
-  This causes problems when running "make check" on parallel builds, as 
+  This causes problems when running "make check" on parallel builds, as
   many of the tool tests function by saving the output from test runs,
-  and comparing it to an exemplar.  
+  and comparing it to an exemplar.
 
   The best solution is to reconfigure the target system so it no longer
   inserts the extra text.  However, this may not be practical.
 
-  In such cases, one solution is to "setenv HDF5_Make_Ignore yes" prior to 
-  the configure and build.  This will cause "make check" to continue after 
+  In such cases, one solution is to "setenv HDF5_Make_Ignore yes" prior to
+  the configure and build.  This will cause "make check" to continue after
   detecting errors in the tool tests.  However, in the case of SDSC DataStar,
   it also leaves you with some 150 "failed" tests to examine by hand.
 
   A second solution is to write a script to run serial tests and filter
   out the text added by the scheduler.  A sample script used on SDSC
-  DataStar is given below, but you will probably have to customize it 
-  for your installation.  
+  DataStar is given below, but you will probably have to customize it
+  for your installation.
 
-  Observe that the basic idea is to insert the script as the first item 
-  on the command line which executes the the test.  The script then 
+  Observe that the basic idea is to insert the script as the first item
+  on the command line which executes the the test.  The script then
   executes the test and filters out the offending text before passing
   it on.
 
@@ -11788,11 +11788,11 @@ Known Problems
         exit $RETURN_VALUE
 
   You get the HDF5 make files and test scipts to execute your filter script
-  by setting the environment variable "RUNSERIAL" to the full path of the 
-  script prior to running configure for parallel builds.  Remember to 
+  by setting the environment variable "RUNSERIAL" to the full path of the
+  script prior to running configure for parallel builds.  Remember to
   "unsetenv RUNSERIAL" before running configure for a serial build.
 
-  Note that the RUNSERIAL environment variable exists so that we can 
+  Note that the RUNSERIAL environment variable exists so that we can
   prefix serial runs as necessary on the target system.  On DataStar,
   no prefix is necessary.  However on an MPICH system, the prefix might
   have to be set to something like "/usr/local/mpi/bin/mpirun -np 1" to
@@ -11811,7 +11811,7 @@ Known Problems
   available.
 
 
-%%%%1.8.0%%%%   
+%%%%1.8.0%%%%
 
 
 HDF5 version 1.8.0 released on Tue Feb 12 20:41:19 CST 2008
@@ -11821,9 +11821,9 @@ INTRODUCTION
 ============
 
 This document describes the differences between the HDF5-1.6.x release series
-and HDF5 1.8.0, and contains information on the platforms tested and known 
+and HDF5 1.8.0, and contains information on the platforms tested and known
 problems in HDF5-1.8.0.  For more details, see the HISTORY-1_0-1_8_0_rc3.txt
-file in the 
+file in the
 release_docs/ directory of the HDF5 source.
 
 Links to the HDF5 1.8.0 source code, documentation, and additional materials
@@ -11835,17 +11835,17 @@ The HDF5 1.8.0 release can be obtained from:
 
      http://www.hdfgroup.org/HDF5/release/obtain5.html
 
-User documentation for 1.8.0 can be accessed directly at this location: 
+User documentation for 1.8.0 can be accessed directly at this location:
 
      http://www.hdfgroup.org/HDF5/doc/
 
-New features in 1.8.0, including brief general descriptions of some new 
+New features in 1.8.0, including brief general descriptions of some new
 and modified APIs, are described in the "What's New in 1.8.0?" document:
 
      http://www.hdfgroup.org/HDF5/doc/ADGuide/WhatsNew180.html
 
-All new and modified APIs are listed in detail in the "HDF5 Software Changes 
-from Release to Release" document, in the section "Release 1.8.0 (current 
+All new and modified APIs are listed in detail in the "HDF5 Software Changes
+from Release to Release" document, in the section "Release 1.8.0 (current
 release) versus Release 1.6.x":
 
      http://www.hdfgroup.org/HDF5/doc/ADGuide/Changes.html
@@ -11872,7 +11872,7 @@ New Features
 
    HDF5 Release 1.8.0 is a major release with many changes and new features.
 
-   New format and interface features discussed in the "What's New in 
+   New format and interface features discussed in the "What's New in
    HDF5 1.8.0" document include the following:
 
        Enhanced group object management
@@ -11884,7 +11884,7 @@ New Features
        New I/O filters: n-bit and scale+offset compression
        New link (H5L) and object (H5O) interfaces and features
        External and user-defined links
-       New high-level APIs: 
+       New high-level APIs:
            HDF5 Packet Table (H5PT) and HDF5 Dimension Scale (H5DS)
        C++ and Fortran interfaces for older high-level APIs:
            H5Lite (H5LT), H5Image (H5IM), and H5Table (H5TB)
@@ -11894,33 +11894,33 @@ New Features
        http://hdfgroup.org/HDF5/doc/ADGuide/WhatsNew180.html
 
 
-    New APIs associated with these features, other interface changes 
+    New APIs associated with these features, other interface changes
     (e.g., ENUM and struct definitions), and new library configuration flags
-    are listed in the "Release 1.8.0 (current release) versus Release 1.6.x" 
+    are listed in the "Release 1.8.0 (current release) versus Release 1.6.x"
     section of "HDF5 Software Changes from Release to Release."
 
         http://hdfgroup.org/HDF5/doc/ADGuide/Changes.html
 
 Compatibility
 -------------
-    Many HDF5 users and user communities have existing applications that 
-    they may wish to port to Release 1.8.0.  Alternatively, some users may 
+    Many HDF5 users and user communities have existing applications that
+    they may wish to port to Release 1.8.0.  Alternatively, some users may
     wish to take advantage of Release 1.8.0's improved performance without
     having to port such applications.  To facilitate managing application
-    compatibility and porting applications from release to release, the HDF 
+    compatibility and porting applications from release to release, the HDF
     Team has implemented the following features:
-        Individually-configurable macros that selectively map common 
+        Individually-configurable macros that selectively map common
             interface names to the old and new interfaces
         Library configuration options to configure the macro mappings
 
     Two related documents accompany this release:
-        "API Compatibility Macros in HDF5" discusses the specifics of the 
-        new individually-configurable macros and library configuration 
+        "API Compatibility Macros in HDF5" discusses the specifics of the
+        new individually-configurable macros and library configuration
         options.
         http://hdfgroup.org/HDF5/doc/RM/APICompatMacros.html
- 
+
         "New Features in HDF5 Release 1.8.0 and Backward/Forward Format
-        Compatibility Issues" discusses each new feature with regard to 
+        Compatibility Issues" discusses each new feature with regard to
         its impact on format compatibility.
         http://hdfgroup.org/HDF5/doc/ADGuide/CompatFormat180.html
 
@@ -11943,13 +11943,13 @@ Referenced documents
 
 Removed Feature
 ===============
-The stream virtual file driver (H5FD_STREAM) have been removed in this 
-release. This affects the functions H5Pset_fapl_stream and H5Pget_fapl_stream 
+The stream virtual file driver (H5FD_STREAM) have been removed in this
+release. This affects the functions H5Pset_fapl_stream and H5Pget_fapl_stream
 and the constant H5FD_STREAM.
 
-This virtual file driver will be available at 
-http://hdf5-addons.origo.ethz.ch/. Note that at the time of this release, 
-the transition is still in progress; the necessary integration tools may 
+This virtual file driver will be available at
+http://hdf5-addons.origo.ethz.ch/. Note that at the time of this release,
+the transition is still in progress; the necessary integration tools may
 not be available when HDF5 Release 1.8.0 first comes out.
 
 
@@ -11958,9 +11958,9 @@ Support for New Platforms, Languages, and Compilers
     - Support for Open VMS 7.3 was added.
 
 
-Bug Fixes since HDF5-1.6.0 
+Bug Fixes since HDF5-1.6.0
 ==========================
-    This release contains numerous bug fixes. For details, see the 
+    This release contains numerous bug fixes. For details, see the
     "Changes from 1.6.0 to 1.8.0-rc3" section of the HISTORY.txt file for
     this release.
 
@@ -11971,7 +11971,7 @@ The following platforms and compilers have been tested for for this release.
 
     AIX 5.2 (32/64 bit)           xlc 8.0.0.11
                                   xlC 8.0
-                                  xlf 10.01.0000.0 
+                                  xlf 10.01.0000.0
                                   mpcc_r 6.0.0.8
                                   mpxlf_r 8.1.1.7
 
@@ -11988,7 +11988,7 @@ The following platforms and compilers have been tested for for this release.
                                   gfortran 4.2.1 20080123
 
     IRIX64 6.5 (64 & n32)         MIPSpro cc 7.4.4m
-                                  F90 MIPSpro 7.4.4m 
+                                  F90 MIPSpro 7.4.4m
                                   C++ MIPSpro cc 7.4.4m
 
     Linux 2.6.9 (RHEL4)           Intel 10.0 compilers
@@ -12001,22 +12001,22 @@ The following platforms and compilers have been tested for for this release.
     (kagiso)                      PGI 7.0-7 (pgcc, pgf90, pgCC)
                                   Intel 9.1 (icc, ifort, icpc)
 
-    Linux 2.6.16.27 x86_64 AMD    gcc 4.1.0 (SuSE Linux), g++ 4.1.0, 
+    Linux 2.6.16.27 x86_64 AMD    gcc 4.1.0 (SuSE Linux), g++ 4.1.0,
     (smirom)                          g95 (GCC 4.0.3)
                                   PGI 6.2-5 (pgcc, pgf90, pgCC)
                                   Intel 9.1 (icc, iort, icpc)
 
     Linux 2.6.5-7.252.1-rtgfx #1  Intel(R) C++ Version 9.0
-          SMP ia64                Intel(R) Fortran Itanium(R) Version 9.0 
+          SMP ia64                Intel(R) Fortran Itanium(R) Version 9.0
     (cobalt)                      SGI MPI
 
     SunOS 5.8 32,46               Sun WorkShop 6 update 2 C 5.3
      (Solaris 2.8)                Sun WorkShop 6 update 2 Fortran 95 6.2
                                   Sun WorkShop 6 update 2 C++ 5.3
 
-    SunOS 5.10                    cc: Sun C 5.8 
-    (linew)                       f90: Sun Fortran 95 8.2 
-                                  CC: Sun C++ 5.8 
+    SunOS 5.10                    cc: Sun C 5.8
+    (linew)                       f90: Sun Fortran 95 8.2
+                                  CC: Sun C++ 5.8
 
     Xeon Linux 2.4.21-32.0.1.ELsmp-perfctr-lustre
     (tungsten)                    gcc 3.2.2 20030222
@@ -12038,7 +12038,7 @@ The following platforms and compilers have been tested for for this release.
 
     Windows Vista                 Visual Studio 2005
 
-    MAC OS  10.4 (Intel)          gcc i686-apple-darwin8-gcc-4.0.1 (GCC) 4.0.1 
+    MAC OS  10.4 (Intel)          gcc i686-apple-darwin8-gcc-4.0.1 (GCC) 4.0.1
                                   G95 (GCC 4.0.3 (g95 0.91!) Nov 21 2006)
 
     Alpha Open VMS 7.3            Compaq C V6.5-001-48BCD
@@ -12055,7 +12055,7 @@ Supported Configuration Features Summary
           x   = not working in this release
           dna = does not apply
           ( ) = footnote appears below second table
-          <blank> = testing incomplete on this feature or platform 
+          <blank> = testing incomplete on this feature or platform
 
 Platform                 C        F90    F90      C++   zlib  SZIP
                          parallel        parallel
@@ -12079,52 +12079,52 @@ RedHat EL3  W PGI   (3)  n        y      n        y     y     n
 SuSe x86_64 gcc  (3,12)  y(1a)    y(11)  n        y     y     y
 SuSe x86_64 Int  (3,12)  n        y(13)  n        y     y     n
 SuSe x86_64 PGI  (3,12)  n        y(8)   n        y     y     y
-Linux 2.4 Xeon C 
+Linux 2.4 Xeon C
     Lustre Intel  (3,6)  n        y      n        y     y     n
-Linux 2.6 SuSE ia64 C 
+Linux 2.6 SuSE ia64 C
     Intel         (3,7)  y        y      y        y     y     n
-Linux 2.6 SGI Altix 
+Linux 2.6 SGI Altix
     ia64 Intel      (3)  y        y      y        y     y     y
 Alpha OpenVMS 7.3.2      n        y      n        y     n     n
 
 
 
-Platform                 Shared  Shared    Shared    static-  Thread-  
-                         C libs  F90 libs  C++ libs  exec     safe     
-Solaris2.8 64-bit        y       y         y         x        y        
-Solaris2.8 32-bit        y       y         y         x        y        
-Solaris2.10 64-bit       y                           x        y        
-Solaris2.10 32-bit       y                           x        y        
-IRIX64_6.5 64-bit        y       y         n         y        y        
-IRIX64_6.5 32-bit        y       dna       y         y        y        
-AIX-5.2 & 5.3 32-bit     n       n         n         y        n        
-AIX-5.2 & 5.3 64-bit     n       n         n         y        n        
-Windows XP               y       y(15)     y         y        y        
-Windows XP x64           y       y(15)     y         y        y        
-Windows Vista            y       n         n         y        y        
-Mac OS X 10.3            y                           y        n        
-FreeBSD 4.11             y       n         y         y        y        
-RedHat EL3  W       (3)  y       y(10)     y         y        y        
-RedHat EL3  W Intel (3)  y       y         y         y        n        
-RedHat EL3  W PGI   (3)  y       y         y         y        n        
-SuSe x86_64 W GNU (3,12) y       y         y         y        y        
-SuSe x86_64 W Int (3,12) y       y         y         y(14)    n        
-SuSe x86_64 W PGI (3,12) y       y         y         y(14)    n        
-Linux 2.4 Xeon C 
-    Lustre Intel    (6)  y       y         y         y        n        
-Linux 2.4 SuSE 
-    ia64 C Intel    (7)  y       y         y         y        n        
-Linux 2.4 SGI Altix 
-    ia64 Intel           y                           y        n        
-Alpha OpenVMS 7.3.2      n       n         n         y        n        
+Platform                 Shared  Shared    Shared    static-  Thread-
+                         C libs  F90 libs  C++ libs  exec     safe
+Solaris2.8 64-bit        y       y         y         x        y
+Solaris2.8 32-bit        y       y         y         x        y
+Solaris2.10 64-bit       y                           x        y
+Solaris2.10 32-bit       y                           x        y
+IRIX64_6.5 64-bit        y       y         n         y        y
+IRIX64_6.5 32-bit        y       dna       y         y        y
+AIX-5.2 & 5.3 32-bit     n       n         n         y        n
+AIX-5.2 & 5.3 64-bit     n       n         n         y        n
+Windows XP               y       y(15)     y         y        y
+Windows XP x64           y       y(15)     y         y        y
+Windows Vista            y       n         n         y        y
+Mac OS X 10.3            y                           y        n
+FreeBSD 4.11             y       n         y         y        y
+RedHat EL3  W       (3)  y       y(10)     y         y        y
+RedHat EL3  W Intel (3)  y       y         y         y        n
+RedHat EL3  W PGI   (3)  y       y         y         y        n
+SuSe x86_64 W GNU (3,12) y       y         y         y        y
+SuSe x86_64 W Int (3,12) y       y         y         y(14)    n
+SuSe x86_64 W PGI (3,12) y       y         y         y(14)    n
+Linux 2.4 Xeon C
+    Lustre Intel    (6)  y       y         y         y        n
+Linux 2.4 SuSE
+    ia64 C Intel    (7)  y       y         y         y        n
+Linux 2.4 SGI Altix
+    ia64 Intel           y                           y        n
+Alpha OpenVMS 7.3.2      n       n         n         y        n
 
     Notes: (1)  Using mpich 1.2.6.
            (1a) Using mpich2 1.0.6.
            (2)  Using mpt and mpich 1.2.6.
-           (3)  Linux 2.6 with GNU, Intel, and PGI compilers, as indicated.  
+           (3)  Linux 2.6 with GNU, Intel, and PGI compilers, as indicated.
                   W or C indicates workstation or cluster, respectively.
 
-           (6)  Linux 2.4.21-32.0.1.  Xeon cluster with ELsmp_perfctr_lustre 
+           (6)  Linux 2.4.21-32.0.1.  Xeon cluster with ELsmp_perfctr_lustre
                   and Intel compilers
            (7)  Linux 2.4.21, SuSE_292.till.  Ia64 cluster with Intel
 compilers
@@ -12143,17 +12143,17 @@ compilers
 
 Known Problems
 ==============
-* We have discovered two problems when running collective IO parallel HDF5 
-  tests with chunking storage on the ChaMPIon MPI compiler on tungsten, a 
+* We have discovered two problems when running collective IO parallel HDF5
+  tests with chunking storage on the ChaMPIon MPI compiler on tungsten, a
   Linux cluster at NCSA.
 
-  Under some complex selection cases: 
+  Under some complex selection cases:
   1) MPI_Get_element returns the wrong value.
-  2) MPI_Type_struct also generates the wrong derived datatype and corrupt 
+  2) MPI_Type_struct also generates the wrong derived datatype and corrupt
      data may be generated.
-  These issues arise only when turning on collective IO with chunking storage 
-  with some complex selections. We have not found these problems on other 
-  MPI-IO compilers. If you encounter these problems, you may use independent 
+  These issues arise only when turning on collective IO with chunking storage
+  with some complex selections. We have not found these problems on other
+  MPI-IO compilers. If you encounter these problems, you may use independent
   IO instead.
 
   To avoid this behavior, change the following line in your code
@@ -12167,20 +12167,20 @@ Known Problems
 * For SNL, spirit/liberty/thunderbird: The serial tests pass but parallel
   tests failed with MPI-IO file locking message. AKC - 2007/6/25
 
-* On Intel 64 Linux cluster (RH 4, Linux 2.6.9) with Intel 10.0 compilers, 
-  use -mp -O1 compilation flags to build the libraries. A higher level of 
-  optimization causes failures in several HDF5 library tests. 
+* On Intel 64 Linux cluster (RH 4, Linux 2.6.9) with Intel 10.0 compilers,
+  use -mp -O1 compilation flags to build the libraries. A higher level of
+  optimization causes failures in several HDF5 library tests.
 
 * For SNL, Red Storm: Only parallel HDF5 is supported.  The serial tests pass
   when run against the parallel library; the parallel tests also pass, but
   with lots of non-fatal error messages.
 
-* For LLNL, uP: both serial and parallel tests pass.  
+* For LLNL, uP: both serial and parallel tests pass.
   Zeus: Serial tests pass but parallel tests fail with a known problem in MPI.
-  ubgl: Serial tests pass but parallel tests fail. 
+  ubgl: Serial tests pass but parallel tests fail.
 
-* On SUN 5.10 C++, testing fails in the "Testing Shared Datatypes with 
-  Attributes" test. 
+* On SUN 5.10 C++, testing fails in the "Testing Shared Datatypes with
+  Attributes" test.
 
 * Configuring with --enable-debug=all produces compiler errors on most
   platforms:  Users who want to run HDF5 in debug mode should use
@@ -12188,66 +12188,66 @@ Known Problems
   information on most modules.
 
 * On Mac OS 10.4, test/dt_arith.c has some errors in conversion from long
-  double to (unsigned) long long and from (unsigned) long long to long double. 
+  double to (unsigned) long long and from (unsigned) long long to long double.
 
 * On Altix SGI with Intel 9.0, testmeta.c would not compile with -O3
   optimization flag.
 
-* On VAX, the Scaleoffset filter is not supported. The filter cannot be 
-  applied to HDF5 data generated on VAX. The Scaleoffset filter only supports 
+* On VAX, the Scaleoffset filter is not supported. The filter cannot be
+  applied to HDF5 data generated on VAX. The Scaleoffset filter only supports
   the IEEE standard for floating-point data.
 
 * On Cray X1, a lone colon on the command line of h5dump --xml (as in
   the testh5dumpxml.sh script) is misinterpereted by the operating system
   and causes an error.
 
-* On mpich 1.2.5 and 1.2.6, if more than two processes contribute no IO and 
-  the application asks to do collective IO, we have found that when using 4 
-  processors, a simple collective write will sometimes be hung. This can be 
+* On mpich 1.2.5 and 1.2.6, if more than two processes contribute no IO and
+  the application asks to do collective IO, we have found that when using 4
+  processors, a simple collective write will sometimes be hung. This can be
   verified with t_mpi test under testpar.
 
 * On IRIX6.5, when the C compiler version is greater than 7.4, complicated
   MPI derived datatype code will work. However, the user should increase
-  the value of the MPI_TYPE_MAX environment variable to some appropriate value 
-  to use collective irregular selection code.  For example, the current 
-  parallel HDF5 test needs to raise MPI_TYPE_MAX to 200,000 to pass the test. 
+  the value of the MPI_TYPE_MAX environment variable to some appropriate value
+  to use collective irregular selection code.  For example, the current
+  parallel HDF5 test needs to raise MPI_TYPE_MAX to 200,000 to pass the test.
 
-* A dataset created or rewritten with a v1.6.3 library or after cannot be read 
+* A dataset created or rewritten with a v1.6.3 library or after cannot be read
   with the v1.6.2 library or before when the Fletcher32 EDC filter is enabled.
-  There was a bug in the calculating code of the Fletcher32 checksum in the 
+  There was a bug in the calculating code of the Fletcher32 checksum in the
   library before v1.6.3; the checksum value was not consistent between big-
-  endian and little-endian systems.  This bug was fixed in Release 1.6.3.  
-  However, after fixing the bug, the checksum value was no longer the same as 
-  before on little-endian system.  Library releases after 1.6.4 can still read 
-  datasets created or rewritten with an HDF5 library of v1.6.2 or before.  
+  endian and little-endian systems.  This bug was fixed in Release 1.6.3.
+  However, after fixing the bug, the checksum value was no longer the same as
+  before on little-endian system.  Library releases after 1.6.4 can still read
+  datasets created or rewritten with an HDF5 library of v1.6.2 or before.
   SLU - 2005/6/30
 
-* For version 6 (6.02 and 6.04) of the Portland Group compiler on the AMD 
-  Opteron processor, there is a bug in the compiler for optimization(-O2).  
-  The library failed in several tests, all related to the MULTI driver.  
-  The problem has been reported to the vendor.  
+* For version 6 (6.02 and 6.04) of the Portland Group compiler on the AMD
+  Opteron processor, there is a bug in the compiler for optimization(-O2).
+  The library failed in several tests, all related to the MULTI driver.
+  The problem has been reported to the vendor.
 
 * On IBM AIX systems, parallel HDF5 mode will fail some tests with error
   messages like "INFO: 0031-XXX ...".  This is from the command `poe'.
   Set the environment variable MP_INFOLEVEL to 0 to minimize the messages
   and run the tests again.
 
-  The tests may fail with messages like "The socket name is already in use",  
-  but HDF5 does not use sockets.  This failure is due to problems with the 
-  poe command trying to set up the debug socket.  To resolve this problem, 
-  check to see whether there are many old /tmp/s.pedb.* files staying around.  
-  These are sockets used by the poe command and left behind due to failed 
-  commands.  First, ask your system administrator to clean them out.  
+  The tests may fail with messages like "The socket name is already in use",
+  but HDF5 does not use sockets.  This failure is due to problems with the
+  poe command trying to set up the debug socket.  To resolve this problem,
+  check to see whether there are many old /tmp/s.pedb.* files staying around.
+  These are sockets used by the poe command and left behind due to failed
+  commands.  First, ask your system administrator to clean them out.
   Lastly, request IBM to provide a means to run poe without the debug socket.
 
 * The --enable-static-exec configure flag fails to compile for Solaris
-  platforms. This is due to the fact that not all of the system libraries on 
+  platforms. This is due to the fact that not all of the system libraries on
   Solaris are available in a static format.
 
   The --enable-static-exec configure flag also fails to correctly compile
-  on IBM SP2 platform for the serial mode. The parallel mode works fine with 
+  on IBM SP2 platform for the serial mode. The parallel mode works fine with
   this option.
-  
+
   It is suggested that you do not use this option on these platforms
   during configuration.
 
@@ -12256,7 +12256,7 @@ Known Problems
   able to handle the `long long' datatype with the warning:
 
         warning: ANSI C does not support `long long'
-  
+
   This warning is innocuous and can be safely ignored.
 
 * The ./dsets tests fail on the TFLOPS machine if the test program,
@@ -12268,42 +12268,42 @@ Known Problems
 * Not all platforms behave correctly with Szip's shared libraries. Szip is
   disabled in these cases, and a message is relayed at configure time. Static
   libraries should be working on all systems that support Szip and should be
-  used when shared libraries are unavailable. 
+  used when shared libraries are unavailable.
 
-  There is also a configure error on Altix machines that incorrectly reports 
+  There is also a configure error on Altix machines that incorrectly reports
   when a version of Szip without an encoder is being used.
 
-* On some platforms that use Intel and Absoft compilers to build the HDF5 
-  Fortran library, compilation may fail for fortranlib_test.f90, fflush1.f90 
-  and fflush2.f90 complaining about the exit subroutine. Comment out the line 
+* On some platforms that use Intel and Absoft compilers to build the HDF5
+  Fortran library, compilation may fail for fortranlib_test.f90, fflush1.f90
+  and fflush2.f90 complaining about the exit subroutine. Comment out the line
   IF (total_error .ne. 0) CALL exit (total_error).
 
 * Information about building with PGI and Intel compilers is available in
   the INSTALL file sections 4.7 and 4.8.
 
 * On at least one system, SDSC DataStar, the scheduler (in this case
-  LoadLeveler) sends job status updates to standard error when you run 
+  LoadLeveler) sends job status updates to standard error when you run
   any executable that was compiled with the parallel compilers.
 
-  This causes problems when running "make check" on parallel builds, as 
+  This causes problems when running "make check" on parallel builds, as
   many of the tool tests function by saving the output from test runs,
-  and comparing it to an exemplar.  
+  and comparing it to an exemplar.
 
   The best solution is to reconfigure the target system so it no longer
   inserts the extra text.  However, this may not be practical.
 
-  In such cases, one solution is to "setenv HDF5_Make_Ignore yes" prior to 
-  the configure and build.  This will cause "make check" to continue after 
+  In such cases, one solution is to "setenv HDF5_Make_Ignore yes" prior to
+  the configure and build.  This will cause "make check" to continue after
   detecting errors in the tool tests.  However, in the case of SDSC DataStar,
   it also leaves you with some 150 "failed" tests to examine by hand.
 
   A second solution is to write a script to run serial tests and filter
   out the text added by the scheduler.  A sample script used on SDSC
-  DataStar is given below, but you will probably have to customize it 
-  for your installation.  
+  DataStar is given below, but you will probably have to customize it
+  for your installation.
 
-  Observe that the basic idea is to insert the script as the first item 
-  on the command line which executes the the test.  The script then 
+  Observe that the basic idea is to insert the script as the first item
+  on the command line which executes the the test.  The script then
   executes the test and filters out the offending text before passing
   it on.
 
@@ -12325,11 +12325,11 @@ Known Problems
         exit $RETURN_VALUE
 
   You get the HDF5 make files and test scipts to execute your filter script
-  by setting the environment variable "RUNSERIAL" to the full path of the 
-  script prior to running configure for parallel builds.  Remember to 
+  by setting the environment variable "RUNSERIAL" to the full path of the
+  script prior to running configure for parallel builds.  Remember to
   "unsetenv RUNSERIAL" before running configure for a serial build.
 
-  Note that the RUNSERIAL environment variable exists so that we can 
+  Note that the RUNSERIAL environment variable exists so that we can
   can prefix serial runs as necessary on the target system.  On DataStar,
   no prefix is necessary.  However on an MPICH system, the prefix might
   have to be set to something like "/usr/local/mpi/bin/mpirun -np 1" to
diff --git a/release_docs/HISTORY-1_8_0-1_10_0.txt b/release_docs/HISTORY-1_8_0-1_10_0.txt
index a364274..b0377b1 100644
--- a/release_docs/HISTORY-1_8_0-1_10_0.txt
+++ b/release_docs/HISTORY-1_8_0-1_10_0.txt
@@ -417,7 +417,7 @@ New Features
     ---------------
 
      C Packet Table API
-     ------------------ 
+     ------------------
      - Replacement of a public function
 
       The existing function H5PTcreate_fl limits applications to deflate
@@ -448,7 +448,7 @@ New Features
                                                (BMR, 2016/03/04, HDFFV-442)
 
      C++ Packet Table API
-     -------------------- 
+     --------------------
      - New constructor
 
       An overloaded constructor is added to FL_PacketTable and takes a property
@@ -484,7 +484,7 @@ New Features
 
 
      Internal header file
-     -------------------- 
+     --------------------
      - A new API function H5DOwrite_chunk.  It writes a data chunk directly
             into a file bypassing hyperslab selection, data conversion, and
             filter pipeline.  The user must be careful with the function and
diff --git a/src/H5.c b/src/H5.c
index 59882e3..bd78ca2 100644
--- a/src/H5.c
+++ b/src/H5.c
@@ -138,8 +138,8 @@ H5_init_library(void)
         if (mpi_initialized && !mpi_finalized) {
             int key_val;
 
-            if(MPI_SUCCESS != (mpi_code = MPI_Comm_create_keyval(MPI_COMM_NULL_COPY_FN, 
-                                                                 (MPI_Comm_delete_attr_function *)H5_mpi_delete_cb, 
+            if(MPI_SUCCESS != (mpi_code = MPI_Comm_create_keyval(MPI_COMM_NULL_COPY_FN,
+                                                                 (MPI_Comm_delete_attr_function *)H5_mpi_delete_cb,
                                                                  &key_val, NULL)))
                 HMPI_GOTO_ERROR(FAIL, "MPI_Comm_create_keyval failed", mpi_code)
 
@@ -209,7 +209,7 @@ H5_init_library(void)
      * The link interface needs to be initialized so that link property lists
      * have their properties registered.
      * The FS module needs to be initialized as a result of the fix for HDFFV-10160:
-     *   It might not be initialized during normal file open. 
+     *   It might not be initialized during normal file open.
      *   When the application does not close the file, routines in the module might
      *   be called via H5_term_library() when shutting down the file.
      */
@@ -745,7 +745,7 @@ H5_debug_mask(const char *s)
 /*-------------------------------------------------------------------------
  * Function:	H5_mpi_delete_cb
  *
- * Purpose:	Callback attribute on MPI_COMM_SELF to terminate the HDF5 
+ * Purpose:	Callback attribute on MPI_COMM_SELF to terminate the HDF5
  *              library when the communicator is destroyed, i.e. on MPI_Finalize.
  *
  * Return:	MPI_SUCCESS
@@ -991,7 +991,7 @@ H5close(void)
  * Return:
  *
  *      Success:    A pointer to the allocated buffer.
- *  
+ *
  *      Failure:    NULL
  *
  *-------------------------------------------------------------------------
@@ -1032,7 +1032,7 @@ H5allocate_memory(size_t size, hbool_t clear)
  * Return:
  *
  *      Success:    A pointer to the resized buffer.
- *  
+ *
  *      Failure:    NULL (the input buffer will be unchanged)
  *
  *-------------------------------------------------------------------------
@@ -1093,7 +1093,7 @@ H5is_library_threadsafe(hbool_t *is_ts)
     H5TRACE1("e", "*b", is_ts);
 
     HDassert(is_ts);
- 
+
     /* At this time, it is impossible for this to fail. */
 #ifdef H5_HAVE_THREADSAFE
     *is_ts = TRUE;
diff --git a/src/H5A.c b/src/H5A.c
index f99fb7d..2986466 100644
--- a/src/H5A.c
+++ b/src/H5A.c
@@ -439,7 +439,7 @@ H5Aopen(hid_t loc_id, const char *attr_name, hid_t aapl_id)
 {
     void *attr = NULL;                    /* attr object from VOL connector */
     H5VL_object_t *vol_obj = NULL;        /* object of loc_id */
-    H5VL_loc_params_t loc_params; 
+    H5VL_loc_params_t loc_params;
     hid_t ret_value = H5I_INVALID_HID;
 
     FUNC_ENTER_API(H5I_INVALID_HID)
diff --git a/src/H5AC.c b/src/H5AC.c
index f6243ad..1756107 100644
--- a/src/H5AC.c
+++ b/src/H5AC.c
@@ -228,10 +228,10 @@ H5AC_term_package(void)
  *
  * Function:    H5AC_cache_image_pending()
  *
- * Purpose:     Debugging function that tests to see if the load of a 
+ * Purpose:     Debugging function that tests to see if the load of a
  *              metadata cache image load is pending (i.e. will be executed
  *              on the next protect or insert)
- *              
+ *
  *              Returns TRUE if a cache image load is pending, and FALSE
  *              if not.  Throws an assertion failure on error.
  *
@@ -421,8 +421,8 @@ H5AC_create(const H5F_t *f, H5AC_cache_config_t *config_ptr, H5AC_cache_image_co
         HGOTO_ERROR(H5E_CACHE, H5E_CANTSET, FAIL, "auto resize configuration failed")
 
     /* Don't need to get the current H5C image config here since the
-     * cache has just been created, and thus f->shared->cache->image_ctl 
-     * must still set to its initial value (H5C__DEFAULT_CACHE_IMAGE_CTL).  
+     * cache has just been created, and thus f->shared->cache->image_ctl
+     * must still set to its initial value (H5C__DEFAULT_CACHE_IMAGE_CTL).
      * Note that this not true as soon as control returns to the application
      * program, as some test code modifies f->shared->cache->image_ctl.
      */
@@ -517,10 +517,10 @@ H5AC_dest(H5F_t *f)
         /* Sanity check */
         HDassert(aux_ptr->magic == H5AC__H5AC_AUX_T_MAGIC);
 
-    /* If the file was opened R/W, attempt to flush all entries 
+    /* If the file was opened R/W, attempt to flush all entries
      * from rank 0 & Bcast clean list to other ranks.
      *
-     * Must not flush in the R/O case, as this will trigger the 
+     * Must not flush in the R/O case, as this will trigger the
      * free space manager settle routines.
      */
     if(H5F_ACC_RDWR & H5F_INTENT(f))
@@ -1963,10 +1963,10 @@ done:
  *              and flag an error and return FAIL otherwise.
  *
  *		At present, this function operates by packing the data
- *		from the instance of H5AC_cache_image_config_t into an 
+ *		from the instance of H5AC_cache_image_config_t into an
  *		instance of H5C_cache_image_ctl_t, and then calling
- *		H5C_validate_cache_image_config().  If and when 
- *              H5AC_cache_image_config_t and H5C_cache_image_ctl_t 
+ *		H5C_validate_cache_image_config().  If and when
+ *              H5AC_cache_image_config_t and H5C_cache_image_ctl_t
  *		diverge, we may have to change this.
  *
  * Return:      Non-negative on success/Negative on failure
@@ -1992,7 +1992,7 @@ H5AC_validate_cache_image_config(H5AC_cache_image_config_t *config_ptr)
         HGOTO_ERROR(H5E_CACHE, H5E_BADVALUE, FAIL, "Unknown image config version")
 
     /* don't need to get the current H5C image config here since the
-     * default values of fields not in the H5AC config will always be 
+     * default values of fields not in the H5AC config will always be
      * valid.
      */
     internal_config.version            = config_ptr->version;
@@ -2132,11 +2132,11 @@ done:
 /*------------------------------------------------------------------------------
  * Function:    H5AC_ignore_tags()
  *
- * Purpose:     Override all assertion frameworks and force application of 
+ * Purpose:     Override all assertion frameworks and force application of
  *              global tag everywhere. This should really only be used in the
- *              tests that need to access functions without going through 
+ *              tests that need to access functions without going through
  *              API paths.
- * 
+ *
  * Return:      SUCCEED on success, FAIL otherwise.
  *
  * Programmer:  Mike McGreevy
@@ -2159,7 +2159,7 @@ H5AC_ignore_tags(const H5F_t *f)
     /* Set up a new metadata tag */
     if(H5C_ignore_tags(f->shared->cache) < 0)
         HGOTO_ERROR(H5E_CACHE, H5E_CANTSET, FAIL, "H5C_ignore_tags() failed")
-            
+
 done:
     FUNC_LEAVE_NOAPI(ret_value)
 } /* H5AC_ignore_tags() */
@@ -2169,7 +2169,7 @@ done:
  * Function:    H5AC_tag()
  *
  * Purpose:     Sets the metadata tag property in the provided property list.
- * 
+ *
  * Return:      void
  *
  * Programmer:  Mike McGreevy
@@ -2197,9 +2197,9 @@ H5AC_tag(haddr_t metadata_tag, haddr_t *prev_tag)
  * Function:    H5AC_retag_copied_metadata()
  *
  * Purpose:     Searches through cache index for all entries with the
- *              H5AC__COPIED_TAG, indicating that it was created as a 
+ *              H5AC__COPIED_TAG, indicating that it was created as a
  *              result of an object copy, and applies the provided tag.
- * 
+ *
  * Return:      SUCCEED on success, FAIL otherwise.
  *
  * Programmer:  Mike McGreevy
@@ -2208,7 +2208,7 @@ H5AC_tag(haddr_t metadata_tag, haddr_t *prev_tag)
  *------------------------------------------------------------------------------
  */
 herr_t
-H5AC_retag_copied_metadata(const H5F_t *f, haddr_t metadata_tag) 
+H5AC_retag_copied_metadata(const H5F_t *f, haddr_t metadata_tag)
 {
     herr_t ret_value = SUCCEED;         /* Return value */
 
@@ -2217,7 +2217,7 @@ H5AC_retag_copied_metadata(const H5F_t *f, haddr_t metadata_tag)
     /* Sanity checks */
     HDassert(f);
     HDassert(f->shared);
-     
+
     /* Call cache-level function to re-tag entries with the COPIED tag */
     if(H5C_retag_entries(f->shared->cache, H5AC__COPIED_TAG, metadata_tag) < 0)
         HGOTO_ERROR(H5E_CACHE, H5E_CANTSET, FAIL, "Can't retag metadata")
@@ -2231,8 +2231,8 @@ done:
  * Function:    H5AC_flush_tagged_metadata()
  *
  * Purpose:     Wrapper for cache level function which flushes all metadata
- *              that contains the specific tag. 
- * 
+ *              that contains the specific tag.
+ *
  * Return:      SUCCEED on success, FAIL otherwise.
  *
  * Programmer:  Mike McGreevy
@@ -2245,8 +2245,8 @@ H5AC_flush_tagged_metadata(H5F_t *f, haddr_t metadata_tag)
 {
     /* Variable Declarations */
     herr_t ret_value = SUCCEED;
- 
-    /* Function Enter Macro */   
+
+    /* Function Enter Macro */
     FUNC_ENTER_NOAPI(FAIL)
 
     /* Assertions */
@@ -2266,8 +2266,8 @@ done:
  * Function:    H5AC_evict_tagged_metadata()
  *
  * Purpose:     Wrapper for cache level function which flushes all metadata
- *              that contains the specific tag. 
- * 
+ *              that contains the specific tag.
+ *
  * Return:      SUCCEED on success, FAIL otherwise.
  *
  * Programmer:  Mike McGreevy
@@ -2280,8 +2280,8 @@ H5AC_evict_tagged_metadata(H5F_t *f, haddr_t metadata_tag, hbool_t match_global)
 {
     /* Variable Declarations */
     herr_t ret_value = SUCCEED;
- 
-    /* Function Enter Macro */   
+
+    /* Function Enter Macro */
     FUNC_ENTER_NOAPI(FAIL)
 
     /* Assertions */
@@ -2302,7 +2302,7 @@ done:
  *
  * Purpose:     Wrapper for cache level function which expunge entries with
  *              a specific tag and type id.
- * 
+ *
  * Return:      SUCCEED on success, FAIL otherwise.
  *
  * Programmer:  Vailin Choi; May 2016
@@ -2314,8 +2314,8 @@ H5AC_expunge_tag_type_metadata(H5F_t *f, haddr_t tag, int type_id, unsigned flag
 {
     /* Variable Declarations */
     herr_t ret_value = SUCCEED;
- 
-    /* Function Enter Macro */   
+
+    /* Function Enter Macro */
     FUNC_ENTER_NOAPI(FAIL)
 
     /* Assertions */
@@ -2335,7 +2335,7 @@ done:
  * Function:    H5AC_get_tag()
  *
  * Purpose:     Get the tag for a metadata cache entry.
- * 
+ *
  * Return:      SUCCEED/FAIL
  *
  * Programmer:  Dana Robinson
@@ -2348,8 +2348,8 @@ H5AC_get_tag(const void *thing, haddr_t *tag)
 {
     /* Variable Declarations */
     herr_t ret_value = SUCCEED;
- 
-    /* Function Enter Macro */   
+
+    /* Function Enter Macro */
     FUNC_ENTER_NOAPI(FAIL)
 
     /* Assertions */
diff --git a/src/H5ACdbg.c b/src/H5ACdbg.c
index 1235206..b40f8d0 100644
--- a/src/H5ACdbg.c
+++ b/src/H5ACdbg.c
@@ -253,8 +253,8 @@ H5AC_flush_dependency_exists(H5F_t *f, haddr_t parent_addr, haddr_t child_addr,
  *              type field contains the expected value.
  *
  *              If the specified entry is in cache, *in_cache_ptr is set
- *              to TRUE, and *type_ok_ptr is set to TRUE or FALSE depending 
- *		on whether the entries type field matches the 
+ *              to TRUE, and *type_ok_ptr is set to TRUE or FALSE depending
+ *		on whether the entries type field matches the
  *		expected_type parameter
  *
  *              If the target entry is not in cache, *in_cache_ptr is
@@ -278,8 +278,8 @@ H5AC_flush_dependency_exists(H5F_t *f, haddr_t parent_addr, haddr_t child_addr,
  */
 #ifndef NDEBUG
 herr_t
-H5AC_verify_entry_type(const H5F_t *f, haddr_t addr, 
-    const H5AC_class_t *expected_type, hbool_t *in_cache_ptr, 
+H5AC_verify_entry_type(const H5F_t *f, haddr_t addr,
+    const H5AC_class_t *expected_type, hbool_t *in_cache_ptr,
     hbool_t *type_ok_ptr)
 {
     H5C_t             * cache_ptr;
@@ -304,7 +304,7 @@ done:
 /*-------------------------------------------------------------------------
  * Function:    H5AC_get_serialization_in_progress
  *
- * Purpose:     Return the current value of 
+ * Purpose:     Return the current value of
  *              cache_ptr->serialization_in_progress.
  *
  * Return:      Current value of cache_ptr->serialization_in_progress.
diff --git a/src/H5ACmpio.c b/src/H5ACmpio.c
index fadde28..f097e83 100644
--- a/src/H5ACmpio.c
+++ b/src/H5ACmpio.c
@@ -135,7 +135,7 @@ H5FL_DEFINE_STATIC(H5AC_slist_entry_t);
 /*-------------------------------------------------------------------------
  * Function:    H5AC__set_sync_point_done_callback
  *
- * Purpose:     Set the value of the sync_point_done callback.  This 
+ * Purpose:     Set the value of the sync_point_done callback.  This
  *		callback is used by the parallel test code to verify
  *		that the expected writes and only the expected writes
  *		take place during a sync point.
@@ -204,7 +204,7 @@ H5AC__set_write_done_callback(H5C_t * cache_ptr, void (* write_done)(void))
  * Function:    H5AC_add_candidate()
  *
  * Purpose:     Add the supplied metadata entry address to the candidate
- *		list.  Verify that each entry added does not appear in 
+ *		list.  Verify that each entry added does not appear in
  *		the list prior to its insertion.
  *
  *		This function is intended for used in constructing list
@@ -261,11 +261,11 @@ done:
  *
  * Purpose:     Broadcast the contents of the process 0 candidate entry
  *		slist.  In passing, also remove all entries from said
- *		list.  As the application of this will be handled by 
- *		the same functions on all processes, construct and 
+ *		list.  As the application of this will be handled by
+ *		the same functions on all processes, construct and
  *		return a copy of the list in the same format as that
  *		received by the other processes.  Note that if this
- *		copy is returned in *haddr_buf_ptr_ptr, the caller 
+ *		copy is returned in *haddr_buf_ptr_ptr, the caller
  *		must free it.
  *
  *		This function must only be called by the process with
@@ -317,7 +317,7 @@ H5AC__broadcast_candidate_list(H5AC_t *cache_ptr, unsigned *num_entries_ptr,
         unsigned	 chk_num_entries = 0;
 
         /* convert the candidate list into the format we
-         * are used to receiving from process 0, and also load it 
+         * are used to receiving from process 0, and also load it
          * into a buffer for transmission.
          */
         if(H5AC__copy_candidate_list_to_buffer(cache_ptr, &chk_num_entries, &haddr_buf_ptr) < 0)
@@ -331,7 +331,7 @@ H5AC__broadcast_candidate_list(H5AC_t *cache_ptr, unsigned *num_entries_ptr,
             HMPI_GOTO_ERROR(FAIL, "MPI_Bcast failed", mpi_result)
     } /* end if */
 
-    /* Pass the number of entries and the buffer pointer 
+    /* Pass the number of entries and the buffer pointer
      * back to the caller.  Do this so that we can use the same code
      * to apply the candidate list to all the processes.
      */
@@ -481,10 +481,10 @@ done:
 /*-------------------------------------------------------------------------
  * Function:    H5AC__construct_candidate_list()
  *
- * Purpose:     In the parallel case when the metadata_write_strategy is 
+ * Purpose:     In the parallel case when the metadata_write_strategy is
  *		H5AC_METADATA_WRITE_STRATEGY__DISTRIBUTED, process 0 uses
- *		this function to construct the list of cache entries to 
- *		be flushed.  This list is then propagated to the other 
+ *		this function to construct the list of cache entries to
+ *		be flushed.  This list is then propagated to the other
  *		caches, and then flushed in a distributed fashion.
  *
  *		The sync_point_op parameter is used to determine the extent
@@ -581,22 +581,22 @@ H5AC__copy_candidate_list_to_buffer_cb(void *_item, void H5_ATTR_UNUSED *_key,
  * Function:    H5AC__copy_candidate_list_to_buffer
  *
  * Purpose:     Allocate buffer(s) and copy the contents of the candidate
- *		entry slist into it (them).  In passing, remove all 
- *		entries from the candidate slist.  Note that the 
+ *		entry slist into it (them).  In passing, remove all
+ *		entries from the candidate slist.  Note that the
  *		candidate slist must not be empty.
  *
  *		If MPI_Offset_buf_ptr_ptr is not NULL, allocate a buffer
  *		of MPI_Offset, copy the contents of the candidate
- *		entry list into it with the appropriate conversions, 
- *		and return the base address of the buffer in 
+ *		entry list into it with the appropriate conversions,
+ *		and return the base address of the buffer in
  *		*MPI_Offset_buf_ptr.  Note that this is the buffer
- *		used by process 0 to transmit the list of entries to 
+ *		used by process 0 to transmit the list of entries to
  *		be flushed to all other processes (in this file group).
  *
  *		Similarly, allocate a buffer of haddr_t, load the contents
- *		of the candidate list into this buffer, and return its 
- *		base address in *haddr_buf_ptr_ptr.  Note that this 
- *		latter buffer is constructed unconditionally.  
+ *		of the candidate list into this buffer, and return its
+ *		base address in *haddr_buf_ptr_ptr.  Note that this
+ *		latter buffer is constructed unconditionally.
  *
  *		In passing, also remove all entries from the candidate
  *		entry slist.
@@ -635,8 +635,8 @@ H5AC__copy_candidate_list_to_buffer(const H5AC_t *cache_ptr, unsigned *num_entri
 
     num_entries = (unsigned)H5SL_count(aux_ptr->candidate_slist_ptr);
 
-    /* allocate a buffer(s) to store the list of candidate entry 
-     * base addresses in 
+    /* allocate a buffer(s) to store the list of candidate entry
+     * base addresses in
      */
     buf_size = sizeof(haddr_t) * num_entries;
     if(NULL == (haddr_buf_ptr = (haddr_t *)H5MM_malloc(buf_size)))
@@ -651,7 +651,7 @@ H5AC__copy_candidate_list_to_buffer(const H5AC_t *cache_ptr, unsigned *num_entri
     if(H5SL_free(aux_ptr->candidate_slist_ptr, H5AC__copy_candidate_list_to_buffer_cb, &udata) < 0)
         HGOTO_ERROR(H5E_CACHE, H5E_CANTFREE, FAIL, "Can't build address list for candidate entries")
 
-    /* Pass the number of entries and the buffer pointer 
+    /* Pass the number of entries and the buffer pointer
      * back to the caller.
      */
     *num_entries_ptr = num_entries;
@@ -1131,32 +1131,32 @@ done:
 /*-------------------------------------------------------------------------
  * Function:    H5AC__propagate_and_apply_candidate_list
  *
- * Purpose:     Prior to the addition of support for multiple metadata 
- *		write strategies, in PHDF5, only the metadata cache with 
- *		mpi rank 0 was allowed to write to file.  All other 
- *		metadata caches on processes with rank greater than 0 
- *		were required to retain dirty entries until they were 
+ * Purpose:     Prior to the addition of support for multiple metadata
+ *		write strategies, in PHDF5, only the metadata cache with
+ *		mpi rank 0 was allowed to write to file.  All other
+ *		metadata caches on processes with rank greater than 0
+ *		were required to retain dirty entries until they were
  *		notified that the entry was clean.
  *
- *		This constraint is relaxed with the distributed 
+ *		This constraint is relaxed with the distributed
  *		metadata write strategy, in which a list of candidate
  *		metadata cache entries is constructed by the process 0
  *		cache and then distributed to the caches of all the other
- *		processes.  Once the listed is distributed, many (if not 
- *		all) processes writing writing a unique subset of the 
- *		entries, and marking the remainder clean.  The subsets 
- *		are chosen so that each entry in the list of candidates 
- *		is written by exactly one cache, and all entries are 
+ *		processes.  Once the listed is distributed, many (if not
+ *		all) processes writing writing a unique subset of the
+ *		entries, and marking the remainder clean.  The subsets
+ *		are chosen so that each entry in the list of candidates
+ *		is written by exactly one cache, and all entries are
  *		marked as being clean in all caches.
  *
- *		While the list of candidate cache entries is prepared 
+ *		While the list of candidate cache entries is prepared
  *		elsewhere, this function is the main routine for distributing
- *		and applying the list.  It must be run simultaniously on 
+ *		and applying the list.  It must be run simultaniously on
  *		all processes that have the relevant file open.  To ensure
- *		proper synchronization, there is a barrier at the beginning 
+ *		proper synchronization, there is a barrier at the beginning
  *		of this function.
  *
- *		At present, this function is called under one of two 
+ *		At present, this function is called under one of two
  *		circumstances:
  *
  *		1) Dirty byte creation exceeds some user specified value.
@@ -1167,10 +1167,10 @@ done:
  *                 and therefore the same dirty data creation.
  *
  *		   This fact is used to synchronize the caches for purposes
- *                 of propagating the list of candidate entries, by simply 
- *		   calling this function from all caches whenever some user 
- *		   specified threshold on dirty data is exceeded.  (the 
- *		   process 0 cache creates the candidate list just before 
+ *                 of propagating the list of candidate entries, by simply
+ *		   calling this function from all caches whenever some user
+ *		   specified threshold on dirty data is exceeded.  (the
+ *		   process 0 cache creates the candidate list just before
  *		   calling this function).
  *
  *		2) Under direct user control -- this operation must be
@@ -1185,20 +1185,20 @@ done:
  *
  *		For the process with mpi rank 0:
  *
- *		1) Load the contents of the candidate list 
+ *		1) Load the contents of the candidate list
  *		   (candidate_slist_ptr) into a buffer, and broadcast that
  *		   buffer to all the other caches.  Clear the candidate
  *		   list in passing.
  *
- *		If there is a positive number of candidates, proceed with 
+ *		If there is a positive number of candidates, proceed with
  *		the following:
  *
  *		2) Apply the candidate entry list.
  *
  *		3) Particpate in a closing barrier.
  *
- *		4) Remove from the dirty list (d_slist_ptr) and from the 
- *		   flushed and still clean entries list (c_slist_ptr),  
+ *		4) Remove from the dirty list (d_slist_ptr) and from the
+ *		   flushed and still clean entries list (c_slist_ptr),
  *                 all addresses that appeared in the candidate list, as
  *		   these entries are now clean.
  *
@@ -1207,7 +1207,7 @@ done:
  *
  *		1) Receive the candidate entry list broadcast
  *
- *		If there is a positive number of candidates, proceed with 
+ *		If there is a positive number of candidates, proceed with
  *		the following:
  *
  *		2) Apply the candidate entry list.
@@ -1264,8 +1264,8 @@ H5AC__propagate_and_apply_candidate_list(H5F_t  *f)
     if(num_candidates > 0) {
         herr_t	         result;
 
-        /* all processes apply the candidate list.  
-         * H5C_apply_candidate_list() handles the details of 
+        /* all processes apply the candidate list.
+         * H5C_apply_candidate_list() handles the details of
          * distributing the writes across the processes.
          */
 
@@ -1284,7 +1284,7 @@ H5AC__propagate_and_apply_candidate_list(H5F_t  *f)
             HGOTO_ERROR(H5E_CACHE, H5E_SYSTEM, FAIL, "Can't apply candidate list.")
 
         /* this code exists primarily for the test bed -- it allows us to
-         * enforce posix semantics on the server that pretends to be a 
+         * enforce posix semantics on the server that pretends to be a
          * file system in our parallel tests.
          */
 	if(aux_ptr->write_done)
@@ -1323,16 +1323,16 @@ done:
  * Function:    H5AC__propagate_flushed_and_still_clean_entries_list
  *
  * Purpose:     In PHDF5, if the process 0 only metadata write strategy
- *		is selected, only the metadata cache with mpi rank 0 is 
- *		allowed to write to file.  All other metadata caches on 
- *		processes with rank greater than 0 must retain dirty 
- *		entries until they are notified that the entry is now 
+ *		is selected, only the metadata cache with mpi rank 0 is
+ *		allowed to write to file.  All other metadata caches on
+ *		processes with rank greater than 0 must retain dirty
+ *		entries until they are notified that the entry is now
  *		clean.
  *
- *		This function is the main routine for handling this 
- *		notification procedure.  It must be called 
- *		simultaniously on all processes that have the relevant 
- *		file open.  To this end, it is called only during a 
+ *		This function is the main routine for handling this
+ *		notification procedure.  It must be called
+ *		simultaniously on all processes that have the relevant
+ *		file open.  To this end, it is called only during a
  *		sync point, with a barrier prior to the call.
  *
  *		Note that any metadata entry writes by process 0 will
@@ -1428,7 +1428,7 @@ done:
  *
  * Purpose:     Receive the list of entry addresses from process 0,
  *		and return it in a buffer pointed to by *haddr_buf_ptr_ptr.
- *		Note that the caller must free this buffer if it is 
+ *		Note that the caller must free this buffer if it is
  *		returned.
  *
  *		This function must only be called by the process with
@@ -1479,7 +1479,7 @@ H5AC__receive_haddr_list(MPI_Comm mpi_comm, unsigned *num_entries_ptr,
             HMPI_GOTO_ERROR(FAIL, "MPI_Bcast failed", mpi_result)
     } /* end if */
 
-    /* finally, pass the number of entries and the buffer pointer 
+    /* finally, pass the number of entries and the buffer pointer
      * back to the caller.
      */
     *num_entries_ptr = num_entries;
@@ -1562,7 +1562,7 @@ done:
  *
  * Purpose:     Receive the list of candidate entries from process 0,
  *		and return it in a buffer pointed to by *haddr_buf_ptr_ptr.
- *		Note that the caller must free this buffer if it is 
+ *		Note that the caller must free this buffer if it is
  *		returned.
  *
  *		This function must only be called by the process with
@@ -1612,38 +1612,38 @@ done:
  * Purpose:     Routine for handling the details of running a sync point
  *		that is triggered by a flush -- which in turn must have been
  *		triggered by either a flush API call or a file close --
- *		when the distributed metadata write strategy is selected.  
- *
- *		Upon entry, each process generates it own candidate list, 
- *              being a sorted list of all dirty metadata entries currently 
- *		in the metadata cache.  Note that this list must be idendical 
- *		across all processes, as all processes see the same stream 
- *		of dirty metadata coming in, and use the same lists of 
- *		candidate entries at each sync point.  (At first glance, this 
+ *		when the distributed metadata write strategy is selected.
+ *
+ *		Upon entry, each process generates it own candidate list,
+ *              being a sorted list of all dirty metadata entries currently
+ *		in the metadata cache.  Note that this list must be idendical
+ *		across all processes, as all processes see the same stream
+ *		of dirty metadata coming in, and use the same lists of
+ *		candidate entries at each sync point.  (At first glance, this
  *		argument sounds circular, but think of it in the sense of
  *		a recursive proof).
  *
- *		If this this list is empty, we are done, and the function 
+ *		If this this list is empty, we are done, and the function
  *		returns
  *
- *		Otherwise, after the sorted list dirty metadata entries is 
- *		constructed, each process uses the same algorithm to assign 
- *		each entry on the candidate list to exactly one process for 
+ *		Otherwise, after the sorted list dirty metadata entries is
+ *		constructed, each process uses the same algorithm to assign
+ *		each entry on the candidate list to exactly one process for
  *		flushing.
  *
  *		At this point, all processes participate in a barrier to
  *		avoid messages from the past/future bugs.
  *
- *		Each process then flushes the entries assigned to it, and 
+ *		Each process then flushes the entries assigned to it, and
  *		marks all other entries on the candidate list as clean.
  *
- *		Finally, all processes participate in a second barrier to 
+ *		Finally, all processes participate in a second barrier to
  *		avoid messages from the past/future bugs.
  *
  *		At the end of this process, process 0 and only process 0
- *		must tidy up its lists of dirtied and cleaned entries.   
+ *		must tidy up its lists of dirtied and cleaned entries.
  *		These lists are not used in the distributed metadata write
- *		strategy, but they must be maintained should we shift 
+ *		strategy, but they must be maintained should we shift
  *		to a strategy that uses them.
  *
  * Return:      Success:        non-negative
@@ -1676,7 +1676,7 @@ H5AC__rsp__dist_md_write__flush(H5F_t *f)
     HDassert(aux_ptr->magic == H5AC__H5AC_AUX_T_MAGIC);
     HDassert(aux_ptr->metadata_write_strategy == H5AC_METADATA_WRITE_STRATEGY__DISTRIBUTED);
 
-    /* first construct the candidate list -- initially, this will be in the 
+    /* first construct the candidate list -- initially, this will be in the
      * form of a skip list.  We will convert it later.
      */
     if(H5C_construct_candidate_list__clean_cache(cache_ptr) < 0)
@@ -1692,7 +1692,7 @@ H5AC__rsp__dist_md_write__flush(H5F_t *f)
             HGOTO_ERROR(H5E_CACHE, H5E_CANTFLUSH, FAIL, "Can't construct candidate buffer.")
 
         /* Initial sync point barrier
-         * 
+         *
          * When flushing from within the close operation from a file,
          * it's possible to skip this barrier (on the second flush of the cache).
          */
@@ -1715,7 +1715,7 @@ H5AC__rsp__dist_md_write__flush(H5F_t *f)
             HGOTO_ERROR(H5E_CACHE, H5E_SYSTEM, FAIL, "Can't apply candidate list.")
 
         /* this code exists primarily for the test bed -- it allows us to
-         * enforce posix semantics on the server that pretends to be a 
+         * enforce posix semantics on the server that pretends to be a
          * file system in our parallel tests.
          */
         if(aux_ptr->write_done)
@@ -1752,45 +1752,45 @@ done:
  * Function:    H5AC__rsp__dist_md_write__flush_to_min_clean
  *
  * Purpose:     Routine for handling the details of running a sync point
- *		triggered by the accumulation of dirty metadata (as 
+ *		triggered by the accumulation of dirty metadata (as
  *		opposed to a flush call to the API) when the distributed
  *		metadata write strategy is selected.
  *
  *		After invocation and initial sanity checking this function
- *		first checks to see if evictions are enabled -- if they 
+ *		first checks to see if evictions are enabled -- if they
  *		are not, the function does nothing and returns.
  *
- *		Otherwise, process zero constructs a list of entries to 
+ *		Otherwise, process zero constructs a list of entries to
  *		be flushed in order to bring the process zero cache back
- *		within its min clean requirement.  Note that this list 
+ *		within its min clean requirement.  Note that this list
  *		(the candidate list) may be empty.
  *
  *              Then, all processes participate in a barrier.
  *
- *		After the barrier, process 0 broadcasts the number of 
- *		entries in the candidate list prepared above, and all 
+ *		After the barrier, process 0 broadcasts the number of
+ *		entries in the candidate list prepared above, and all
  *		other processes receive this number.
  *
  *		If this number is zero, we are done, and the function
  *		returns without further action.
  *
- *		Otherwise, process 0 broadcasts the sorted list of 
+ *		Otherwise, process 0 broadcasts the sorted list of
  *		candidate entries, and all other processes receive it.
  *
- *		Then, each process uses the same algorithm to assign 
- *		each entry on the candidate list to exactly one process 
+ *		Then, each process uses the same algorithm to assign
+ *		each entry on the candidate list to exactly one process
  *		for flushing.
  *
- *		Each process then flushes the entries assigned to it, and 
+ *		Each process then flushes the entries assigned to it, and
  *		marks all other entries on the candidate list as clean.
  *
- *		Finally, all processes participate in a second barrier to 
+ *		Finally, all processes participate in a second barrier to
  *		avoid messages from the past/future bugs.
  *
  *		At the end of this process, process 0 and only process 0
- *		must tidy up its lists of dirtied and cleaned entries.   
+ *		must tidy up its lists of dirtied and cleaned entries.
  *		These lists are not used in the distributed metadata write
- *		strategy, but they must be maintained should we shift 
+ *		strategy, but they must be maintained should we shift
  *		to a strategy that uses them.
  *
  * Return:      Success:        non-negative
@@ -1846,25 +1846,25 @@ done:
  *
  * Purpose:     Routine for handling the details of running a sync point
  *		that is triggered a flush -- which in turn must have been
- *		triggered by either a flush API call or a file close -- 
- *		when the process 0 only metadata write strategy is selected.  
+ *		triggered by either a flush API call or a file close --
+ *		when the process 0 only metadata write strategy is selected.
  *
  *              First, all processes participate in a barrier.
  *
  *		Then process zero flushes all dirty entries, and broadcasts
- *		they number of clean entries (if any) to all the other 
+ *		they number of clean entries (if any) to all the other
  *		caches.
  *
  *		If this number is zero, we are done.
  *
- *		Otherwise, process 0 broadcasts the list of cleaned 
+ *		Otherwise, process 0 broadcasts the list of cleaned
  *		entries, and all other processes which are part of this
  *		file group receive it, and mark the listed entries as
  *		clean in their caches.
  *
- *		Since all processes have the same set of dirty 
+ *		Since all processes have the same set of dirty
  *		entries at the beginning of the sync point, and all
- *		entries that will be written are written before 
+ *		entries that will be written are written before
  *		process zero broadcasts the number of cleaned entries,
  *		there is no need for a closing barrier.
  *
@@ -1896,8 +1896,8 @@ H5AC__rsp__p0_only__flush(H5F_t *f)
     HDassert(aux_ptr->magic == H5AC__H5AC_AUX_T_MAGIC);
     HDassert(aux_ptr->metadata_write_strategy == H5AC_METADATA_WRITE_STRATEGY__PROCESS_0_ONLY);
 
-    /* To prevent "messages from the future" we must 
-     * synchronize all processes before we start the flush.  
+    /* To prevent "messages from the future" we must
+     * synchronize all processes before we start the flush.
      * Hence the following barrier.
      *
      * However, when flushing from within the close operation from a file,
@@ -1925,7 +1925,7 @@ H5AC__rsp__p0_only__flush(H5F_t *f)
             HGOTO_ERROR(H5E_CACHE, H5E_CANTFLUSH, FAIL, "Can't flush.")
 
         /* this code exists primarily for the test bed -- it allows us to
-         * enforce POSIX semantics on the server that pretends to be a 
+         * enforce POSIX semantics on the server that pretends to be a
          * file system in our parallel tests.
          */
         if(aux_ptr->write_done)
@@ -1945,32 +1945,32 @@ done:
  * Function:    H5AC__rsp__p0_only__flush_to_min_clean
  *
  * Purpose:     Routine for handling the details of running a sync point
- *		triggered by the accumulation of dirty metadata (as 
+ *		triggered by the accumulation of dirty metadata (as
  *		opposed to a flush call to the API) when the process 0
  *		only metadata write strategy is selected.
  *
  *		After invocation and initial sanity checking this function
- *		first checks to see if evictions are enabled -- if they 
+ *		first checks to see if evictions are enabled -- if they
  *		are not, the function does nothing and returns.
  *
  *              Otherwise, all processes participate in a barrier.
  *
- *		After the barrier, if this is process 0, the function 
- *		causes the cache to flush sufficient entries to get the 
- *		cache back within its minimum clean fraction, and broadcast 
- *		the number of entries which have been flushed since 
+ *		After the barrier, if this is process 0, the function
+ *		causes the cache to flush sufficient entries to get the
+ *		cache back within its minimum clean fraction, and broadcast
+ *		the number of entries which have been flushed since
  *		the last sync point, and are still clean.
  *
  *		If this number is zero, we are done.
  *
- *		Otherwise, process 0 broadcasts the list of cleaned 
+ *		Otherwise, process 0 broadcasts the list of cleaned
  *		entries, and all other processes which are part of this
  *		file group receive it, and mark the listed entries as
  *		clean in their caches.
  *
- *		Since all processes have the same set of dirty 
+ *		Since all processes have the same set of dirty
  *		entries at the beginning of the sync point, and all
- *		entries that will be written are written before 
+ *		entries that will be written are written before
  *		process zero broadcasts the number of cleaned entries,
  *		there is no need for a closing barrier.
  *
@@ -2026,9 +2026,9 @@ H5AC__rsp__p0_only__flush_to_min_clean(H5F_t *f)
         if(0 == aux_ptr->mpi_rank) {
             herr_t	 result;
 
-            /* here, process 0 flushes as many entries as necessary to 
+            /* here, process 0 flushes as many entries as necessary to
              * comply with the currently specified min clean size.
-             * Note that it is quite possible that no entries will be 
+             * Note that it is quite possible that no entries will be
              * flushed.
              */
 
@@ -2066,23 +2066,23 @@ done:
  * Function:    H5AC__run_sync_point
  *
  * Purpose:     Top level routine for managing a sync point between all
- *		meta data caches in the parallel case.  Since all caches 
+ *		meta data caches in the parallel case.  Since all caches
  *		see the same sequence of dirty metadata, we simply count
  *		bytes of dirty metadata, and run a sync point whenever the
  *		number of dirty bytes of metadata seen since the last
  *		sync point exceeds a threshold that is common across all
- *		processes.  We also run sync points in response to 
+ *		processes.  We also run sync points in response to
  *		HDF5 API calls triggering either a flush or a file close.
  *
- *		In earlier versions of PHDF5, only the metadata cache with 
- *		mpi rank 0 was allowed to write to file.  All other 
+ *		In earlier versions of PHDF5, only the metadata cache with
+ *		mpi rank 0 was allowed to write to file.  All other
  *		metadata caches on processes with rank greater than 0 were
- *		required to retain dirty entries until they were notified 
+ *		required to retain dirty entries until they were notified
  *		that the entry is was clean.
  *
- *		This function was created to make it easier for us to 
- *		experiment with other options, as it is a single point 
- *		for the execution of sync points.  
+ *		This function was created to make it easier for us to
+ *		experiment with other options, as it is a single point
+ *		for the execution of sync points.
  *
  * Return:      Success:        non-negative
  *
@@ -2197,13 +2197,13 @@ done:
  *
  * Purpose:     In the distributed metadata write strategy, not all dirty
  *		entries are written by process 0 -- thus we must tidy
- *		up the dirtied, and flushed and still clean lists 
+ *		up the dirtied, and flushed and still clean lists
  *		maintained by process zero after each sync point.
  *
  *		This procedure exists to tend to this issue.
  *
  *		At this point, all entries that process 0 cleared should
- *		have been removed from both the dirty and flushed and 
+ *		have been removed from both the dirty and flushed and
  *		still clean lists, and entries that process 0 has flushed
  *		should have been removed from the dirtied list and added
  *		to the flushed and still clean list.
@@ -2214,7 +2214,7 @@ done:
  *		them to be used should the metadata write strategy change
  *		to one that uses these lists.
  *
- *		Thus for our purposes, all we need to do is remove from 
+ *		Thus for our purposes, all we need to do is remove from
  *		the dirtied and flushed and still clean lists all
  *		references to entries that appear in the candidate list.
  *
@@ -2246,11 +2246,11 @@ H5AC__tidy_cache_0_lists(H5AC_t *cache_ptr, unsigned num_candidates,
     HDassert(num_candidates > 0);
     HDassert(candidates_list_ptr != NULL);
 
-    /* clean up dirtied and flushed and still clean lists by removing 
-     * all entries on the candidate list.  Cleared entries should 
-     * have been removed from both the dirty and cleaned lists at 
-     * this point, flushed entries should have been added to the 
-     * cleaned list.  However, for this metadata write strategy, 
+    /* clean up dirtied and flushed and still clean lists by removing
+     * all entries on the candidate list.  Cleared entries should
+     * have been removed from both the dirty and cleaned lists at
+     * this point, flushed entries should have been added to the
+     * cleaned list.  However, for this metadata write strategy,
      * we just want to remove all references to the candidate entries.
      */
     for(u = 0; u < num_candidates; u++) {
@@ -2260,7 +2260,7 @@ H5AC__tidy_cache_0_lists(H5AC_t *cache_ptr, unsigned num_candidates,
 
         addr = candidates_list_ptr[u];
 
-        /* addr may be either on the dirtied list, or on the flushed 
+        /* addr may be either on the dirtied list, or on the flushed
          * and still clean list.  Remove it.
          */
         if(NULL != (d_slist_entry_ptr = (H5AC_slist_entry_t *)H5SL_remove(aux_ptr->d_slist_ptr, (void *)&addr)))
diff --git a/src/H5ACpkg.h b/src/H5ACpkg.h
index 8997382..86ff385 100644
--- a/src/H5ACpkg.h
+++ b/src/H5ACpkg.h
@@ -153,23 +153,23 @@ H5FL_EXTERN(H5AC_aux_t);
  *
  * Update: When the above was written, I planned to allow the process
  *	0 metadata cache to write dirty metadata between sync points.
- *	However, testing indicated that this allowed occasional 
+ *	However, testing indicated that this allowed occasional
  *	messages from the future to reach the caches on other processes.
  *
  *	To resolve this, the code was altered to require that all metadata
  *	writes take place during sync points -- which solved the problem.
- *	Initially all writes were performed by the process 0 cache.  This 
+ *	Initially all writes were performed by the process 0 cache.  This
  *	approach was later replaced with a distributed write approach
- *	in which each process writes a subset of the metadata to be 
- *	written.  
- *
- *	After thinking on the matter for a while, I arrived at the 
- *	conclusion that the process 0 cache could be allowed to write 
- *	dirty metadata between sync points if it restricted itself to 
- *	entries that had been dirty at the time of the previous sync point.  
- *	
+ *	in which each process writes a subset of the metadata to be
+ *	written.
+ *
+ *	After thinking on the matter for a while, I arrived at the
+ *	conclusion that the process 0 cache could be allowed to write
+ *	dirty metadata between sync points if it restricted itself to
+ *	entries that had been dirty at the time of the previous sync point.
+ *
  *	To date, there has been no attempt to implement this optimization.
- *	However, should it be attempted, much of the supporting code 
+ *	However, should it be attempted, much of the supporting code
  *	should still be around.
  *
  *						JRM -- 1/6/15
@@ -206,14 +206,14 @@ H5FL_EXTERN(H5AC_aux_t);
  *		broadcast.  This field is reset to zero after each such
  *		broadcast.
  *
- * metadata_write_strategy: Integer code indicating how we will be 
- *		writing the metadata.  In the first incarnation of 
+ * metadata_write_strategy: Integer code indicating how we will be
+ *		writing the metadata.  In the first incarnation of
  *		this code, all writes were done from process 0.  This
- *		field exists to facilitate experiments with other 
+ *		field exists to facilitate experiments with other
  *		strategies.
  *
  *		At present, this field must be set to either
- *		H5AC_METADATA_WRITE_STRATEGY__PROCESS_0_ONLY or 
+ *		H5AC_METADATA_WRITE_STRATEGY__PROCESS_0_ONLY or
  *		H5AC_METADATA_WRITE_STRATEGY__DISTRIBUTED.
  *
  * dirty_bytes_propagations: This field only exists when the
@@ -267,7 +267,7 @@ H5FL_EXTERN(H5AC_aux_t);
  *
  * Things have changed a bit since the following four fields were defined.
  * If metadata_write_strategy is H5AC_METADATA_WRITE_STRATEGY__PROCESS_0_ONLY,
- * all comments hold as before -- with the caviate that pending further 
+ * all comments hold as before -- with the caviate that pending further
  * coding, the process 0 metadata cache is forbidden to flush entries outside
  * of a sync point.
  *
@@ -337,16 +337,16 @@ H5FL_EXTERN(H5AC_aux_t);
  *              needed.
  *
  *		Note: This field has been extended for use by all processes
- *		      with the addition of support for the distributed 
- *		      metadata write strategy.        
+ *		      with the addition of support for the distributed
+ *		      metadata write strategy.
  *                                                     JRM -- 5/9/10
  *
  * sync_point_done:  In the parallel test bed, it is necessary to verify
  *		that the expected writes, and only the expected writes,
  *		have taken place at the end of each sync point.
  *
- *		The sync_point_done callback allows t_cache to perform 
- *		this verification.  The field is set to NULL when the 
+ *		The sync_point_done callback allows t_cache to perform
+ *		this verification.  The field is set to NULL when the
  *		callback is not needed.
  *
  * The following field supports the metadata cache image feature.
@@ -402,7 +402,7 @@ typedef struct H5AC_aux_t
 
     void	(* write_done)(void);
 
-    void	(* sync_point_done)(unsigned num_writes, 
+    void	(* sync_point_done)(unsigned num_writes,
                                     haddr_t * written_entries_tbl);
 
     unsigned    p0_image_len;
diff --git a/src/H5ACprivate.h b/src/H5ACprivate.h
index 691f7c6..b932e16 100644
--- a/src/H5ACprivate.h
+++ b/src/H5ACprivate.h
@@ -88,18 +88,18 @@ typedef enum {
  *
  * Hence the following, somewhat odd set of #defines.
  *
- * NOTE: test/cache plays games with the f->shared->cache, and thus 
- *       setting H5AC_DUMP_STATS_ON_CLOSE will generate constant, 
- *	 irrelevant data when run with that test program.  See 
+ * NOTE: test/cache plays games with the f->shared->cache, and thus
+ *       setting H5AC_DUMP_STATS_ON_CLOSE will generate constant,
+ *	 irrelevant data when run with that test program.  See
  * 	 comments on setup_cache() / takedown_cache() in test/cache_common.c.
  *       for details.
  *
  *	 If you need to dump stats at file close in test/cache.c,
- *	 use the dump_stats parameter to takedown_cache(), or call 
+ *	 use the dump_stats parameter to takedown_cache(), or call
  *	 H5C_stats() directly.
  *					JRM -- 4/12/15
  *
- * Added the H5AC_DUMP_IMAGE_STATS_ON_CLOSE #define, which works much 
+ * Added the H5AC_DUMP_IMAGE_STATS_ON_CLOSE #define, which works much
  * the same way as H5AC_DUMP_STATS_ON_CLOSE.  However, the set of stats
  * displayed is much smaller, and directed purely at the cache image feature.
  *
@@ -419,7 +419,7 @@ H5_DLL herr_t H5AC_set_cache_auto_resize_config(H5AC_t *cache_ptr,
 H5_DLL herr_t H5AC_validate_config(H5AC_cache_config_t *config_ptr);
 
 /* Cache image routines */
-H5_DLL herr_t H5AC_load_cache_image_on_next_protect(H5F_t *f, haddr_t addr, 
+H5_DLL herr_t H5AC_load_cache_image_on_next_protect(H5F_t *f, haddr_t addr,
     hsize_t len, hbool_t rw);
 H5_DLL herr_t H5AC_validate_cache_image_config(H5AC_cache_image_config_t *config_ptr);
 H5_DLL hbool_t H5AC_cache_image_pending(const H5F_t *f);
diff --git a/src/H5Adense.c b/src/H5Adense.c
index 7491dd2..a73fcc6 100644
--- a/src/H5Adense.c
+++ b/src/H5Adense.c
@@ -310,17 +310,17 @@ H5A__dense_fnd_cb(const H5A_t *attr, hbool_t *took_ownership, void *_user_attr)
     HDassert(took_ownership);
 
     /*
-     *  If there is an attribute already stored in "user_attr", 
-     *  we need to free the dynamially allocated spaces for the 
-     *  attribute, otherwise we got infinite loop closing library due to 
+     *  If there is an attribute already stored in "user_attr",
+     *  we need to free the dynamially allocated spaces for the
+     *  attribute, otherwise we got infinite loop closing library due to
      *  outstanding allocation. (HDFFV-10659)
      *
      *  This callback is used by H5A__dense_remove() to close/free the
      *  attribute stored in "user_attr" (via H5O__msg_free_real()) after
      *  the attribute node is deleted from the name index v2 B-tree.
-     *  The issue is: 
-     *      When deleting the attribute node from the B-tree, 
-     *      if the attribute is found in the intermediate B-tree nodes, 
+     *  The issue is:
+     *      When deleting the attribute node from the B-tree,
+     *      if the attribute is found in the intermediate B-tree nodes,
      *      which may be merged/redistributed, we need to free the dynamically
      *      allocated spaces for the intermediate decoded attribute.
      */
diff --git a/src/H5Adeprec.c b/src/H5Adeprec.c
index e0a0f55..dd5eae3 100644
--- a/src/H5Adeprec.c
+++ b/src/H5Adeprec.c
@@ -192,7 +192,7 @@ H5Aopen_name(hid_t loc_id, const char *name)
 {
     void    *attr = NULL;       /* attr object from VOL connector */
     H5VL_object_t  *vol_obj = NULL;     /* Object of loc_id */
-    H5VL_loc_params_t loc_params; 
+    H5VL_loc_params_t loc_params;
     hid_t		ret_value = H5I_INVALID_HID;              /* Return value */
 
     FUNC_ENTER_API(H5I_INVALID_HID)
diff --git a/src/H5B2.c b/src/H5B2.c
index 6b0d7a3..c9ed303 100644
--- a/src/H5B2.c
+++ b/src/H5B2.c
@@ -507,7 +507,7 @@ H5B2_find(H5B2_t *bt2, void *udata, H5B2_found_t op, void *op_data)
         if((hdr->cls->compare)(udata, hdr->min_native_rec, &cmp) < 0)
             HGOTO_ERROR(H5E_BTREE, H5E_CANTCOMPARE, FAIL, "can't compare btree2 records")
         if(cmp < 0)
-            HGOTO_DONE(FALSE) 	/* Less than the least record--not found */ 
+            HGOTO_DONE(FALSE) 	/* Less than the least record--not found */
 	else if(cmp == 0) { /* Record is found */
 	    if(op && (op)(hdr->min_native_rec, op_data) < 0)
                 HGOTO_ERROR(H5E_BTREE, H5E_NOTFOUND, FAIL, "'found' callback failed for B-tree find operation")
@@ -518,7 +518,7 @@ H5B2_find(H5B2_t *bt2, void *udata, H5B2_found_t op, void *op_data)
 	if((hdr->cls->compare)(udata, hdr->max_native_rec, &cmp) < 0)
             HGOTO_ERROR(H5E_BTREE, H5E_CANTCOMPARE, FAIL, "can't compare btree2 records")
         if(cmp > 0)
-            HGOTO_DONE(FALSE) 	/* Less than the least record--not found */ 
+            HGOTO_DONE(FALSE) 	/* Less than the least record--not found */
 	else if(cmp == 0) { /* Record is found */
 	    if(op && (op)(hdr->max_native_rec, op_data) < 0)
                 HGOTO_ERROR(H5E_BTREE, H5E_NOTFOUND, FAIL, "'found' callback failed for B-tree find operation")
@@ -1601,7 +1601,7 @@ done:
  * Function:    H5B2_patch_file
  *
  * Purpose:     Patch the top-level file pointer contained in bt2
- *              to point to idx_info->f if they are different.  
+ *              to point to idx_info->f if they are different.
  *		This is possible because the file pointer in bt2 can be
  *		closed out if bt2 remains open.
  *
diff --git a/src/H5B2int.c b/src/H5B2int.c
index ea03ed6..53ac835 100644
--- a/src/H5B2int.c
+++ b/src/H5B2int.c
@@ -57,7 +57,7 @@
 /********************/
 /* Local Prototypes */
 /********************/
-static herr_t H5B2__update_child_flush_depends(H5B2_hdr_t *hdr, 
+static herr_t H5B2__update_child_flush_depends(H5B2_hdr_t *hdr,
     unsigned depth, const H5B2_node_ptr_t *node_ptrs, unsigned start_idx,
     unsigned end_idx, void *old_parent, void *new_parent);
 
@@ -1757,7 +1757,7 @@ H5B2__create_flush_depend(H5AC_info_t *parent_entry, H5AC_info_t *child_entry)
     herr_t ret_value = SUCCEED;         /* Return value */
 
     FUNC_ENTER_NOAPI_NOINIT
-    
+
     /* Sanity check */
     HDassert(parent_entry);
     HDassert(child_entry);
@@ -1794,7 +1794,7 @@ H5B2__update_flush_depend(H5B2_hdr_t *hdr, unsigned depth,
     herr_t ret_value = SUCCEED;         /* Return value */
 
     FUNC_ENTER_PACKAGE
-    
+
     /* Sanity checks */
     HDassert(hdr);
     HDassert(depth > 0);
@@ -1884,14 +1884,14 @@ done:
  */
 static herr_t
 H5B2__update_child_flush_depends(H5B2_hdr_t *hdr, unsigned depth,
-    const H5B2_node_ptr_t *node_ptrs, unsigned start_idx, unsigned end_idx, 
+    const H5B2_node_ptr_t *node_ptrs, unsigned start_idx, unsigned end_idx,
     void *old_parent, void *new_parent)
 {
     unsigned u;                         /* Local index variable */
     herr_t ret_value = SUCCEED;         /* Return value */
 
     FUNC_ENTER_STATIC
-    
+
     /* Sanity checks */
     HDassert(hdr);
     HDassert(depth > 1);
@@ -1929,7 +1929,7 @@ H5B2__destroy_flush_depend(H5AC_info_t *parent_entry, H5AC_info_t *child_entry)
     herr_t ret_value = SUCCEED;         /* Return value */
 
     FUNC_ENTER_NOAPI_NOINIT
-    
+
     /* Sanity check */
     HDassert(parent_entry);
     HDassert(child_entry);
diff --git a/src/H5B2internal.c b/src/H5B2internal.c
index 92c802e..1fee0af 100644
--- a/src/H5B2internal.c
+++ b/src/H5B2internal.c
@@ -388,7 +388,7 @@ H5B2__insert_internal(H5B2_hdr_t *hdr, uint16_t depth, unsigned *parent_cache_in
         size_t      split_nrec; /* Number of records to split node at */
 
         /* Locate node pointer for child */
-        if(H5B2__locate_record(hdr->cls, internal->nrec, hdr->nat_off, internal->int_native, 
+        if(H5B2__locate_record(hdr->cls, internal->nrec, hdr->nat_off, internal->int_native,
                                udata, &idx, &cmp) < 0)
             HGOTO_ERROR(H5E_BTREE, H5E_CANTCOMPARE, FAIL, "can't compare btree2 records")
         if(cmp == 0)
@@ -444,7 +444,7 @@ H5B2__insert_internal(H5B2_hdr_t *hdr, uint16_t depth, unsigned *parent_cache_in
 
             /* Locate node pointer for child (after split/redistribute) */
             /* Actually, this can be easily updated (for 2-node redistrib.) and shouldn't require re-searching */
-            if(H5B2__locate_record(hdr->cls, internal->nrec, hdr->nat_off, internal->int_native, 
+            if(H5B2__locate_record(hdr->cls, internal->nrec, hdr->nat_off, internal->int_native,
                                    udata, &idx, &cmp) < 0)
                 HGOTO_ERROR(H5E_BTREE, H5E_CANTCOMPARE, FAIL, "can't compare btree2 records")
             if(cmp == 0)
diff --git a/src/H5B2leaf.c b/src/H5B2leaf.c
index c1221ba..1fde36d 100644
--- a/src/H5B2leaf.c
+++ b/src/H5B2leaf.c
@@ -1027,7 +1027,7 @@ done:
  *-------------------------------------------------------------------------
  */
 H5_ATTR_PURE herr_t
-H5B2__assert_leaf(const H5B2_hdr_t H5_ATTR_NDEBUG_UNUSED *hdr, 
+H5B2__assert_leaf(const H5B2_hdr_t H5_ATTR_NDEBUG_UNUSED *hdr,
     const H5B2_leaf_t H5_ATTR_NDEBUG_UNUSED *leaf)
 {
     /* General sanity checking on node */
diff --git a/src/H5B2pkg.h b/src/H5B2pkg.h
index 27229f1..338db5a 100644
--- a/src/H5B2pkg.h
+++ b/src/H5B2pkg.h
@@ -433,7 +433,7 @@ H5_DLL herr_t H5B2__remove_internal(H5B2_hdr_t *hdr, hbool_t *depth_decreased,
 H5_DLL herr_t H5B2__remove_leaf(H5B2_hdr_t *hdr, H5B2_node_ptr_t *curr_node_ptr,
     H5B2_nodepos_t curr_pos, void *parent, void *udata, H5B2_remove_t op,
     void *op_data);
-H5_DLL herr_t H5B2__remove_internal_by_idx(H5B2_hdr_t *hdr, 
+H5_DLL herr_t H5B2__remove_internal_by_idx(H5B2_hdr_t *hdr,
     hbool_t *depth_decreased, void *swap_loc, void *swap_parent, uint16_t depth,
     H5AC_info_t *parent_cache_info, unsigned *parent_cache_info_flags_ptr,
     H5B2_node_ptr_t *curr_node_ptr, H5B2_nodepos_t curr_pos, hsize_t n,
diff --git a/src/H5B2test.c b/src/H5B2test.c
index 0f4a39c..7affd49 100644
--- a/src/H5B2test.c
+++ b/src/H5B2test.c
@@ -562,7 +562,7 @@ H5B2__get_node_info_test(H5B2_t *bt2, void *udata, H5B2_node_info_test_t *ninfo)
         } /* end if */
 
         /* Locate node pointer for child */
-        if(H5B2__locate_record(hdr->cls, internal->nrec, hdr->nat_off, internal->int_native, 
+        if(H5B2__locate_record(hdr->cls, internal->nrec, hdr->nat_off, internal->int_native,
                                udata, &idx, &cmp) < 0)
             HGOTO_ERROR(H5E_BTREE, H5E_CANTCOMPARE, FAIL, "can't compare btree2 records")
 
@@ -616,7 +616,7 @@ H5B2__get_node_info_test(H5B2_t *bt2, void *udata, H5B2_node_info_test_t *ninfo)
         } /* end if */
 
         /* Locate record */
-        if(H5B2__locate_record(hdr->cls, leaf->nrec, hdr->nat_off, leaf->leaf_native, 
+        if(H5B2__locate_record(hdr->cls, leaf->nrec, hdr->nat_off, leaf->leaf_native,
                                udata, &idx, &cmp) < 0)
             HGOTO_ERROR(H5E_BTREE, H5E_CANTCOMPARE, FAIL, "can't compare btree2 records")
 
diff --git a/src/H5C.c b/src/H5C.c
index 2a90bd1..91e4158 100644
--- a/src/H5C.c
+++ b/src/H5C.c
@@ -171,7 +171,7 @@ static herr_t H5C__verify_len_eoa(H5F_t *f, const H5C_class_t * type,
     haddr_t addr, size_t *len, hbool_t actual);
 
 #if H5C_DO_SLIST_SANITY_CHECKS
-static hbool_t H5C_entry_in_skip_list(H5C_t * cache_ptr, 
+static hbool_t H5C_entry_in_skip_list(H5C_t * cache_ptr,
                                       H5C_cache_entry_t *target_ptr);
 #endif /* H5C_DO_SLIST_SANITY_CHECKS */
 
@@ -722,10 +722,10 @@ H5C_free_tag_list_cb(void *_item, void H5_ATTR_UNUSED *key, void H5_ATTR_UNUSED
  *
  * Function:    H5C_prep_for_file_close
  *
- * Purpose:     This function should be called just prior to the cache 
- *		flushes at file close.  There should be no protected 
+ * Purpose:     This function should be called just prior to the cache
+ *		flushes at file close.  There should be no protected
  *		entries in the cache at this point.
- *		
+ *
  * Return:      Non-negative on success/Negative on failure
  *
  * Programmer:  John Mainzer
@@ -750,8 +750,8 @@ H5C_prep_for_file_close(H5F_t *f)
     HDassert(cache_ptr);
     HDassert(cache_ptr->magic == H5C__H5C_T_MAGIC);
 
-    /* For now at least, it is possible to receive the 
-     * close warning more than once -- the following 
+    /* For now at least, it is possible to receive the
+     * close warning more than once -- the following
      * if statement handles this.
      */
     if(cache_ptr->close_warning_received)
@@ -767,8 +767,8 @@ H5C_prep_for_file_close(H5F_t *f)
 
 #ifdef H5_HAVE_PARALLEL
     if ( ( H5F_INTENT(f) & H5F_ACC_RDWR ) &&
-         ( ! image_generated ) && 
-         ( cache_ptr->aux_ptr != NULL ) && 
+         ( ! image_generated ) &&
+         ( cache_ptr->aux_ptr != NULL ) &&
          ( f->shared->fs_persist ) ) {
         /* If persistent free space managers are enabled, flushing the
          * metadata cache may result in the deletion, insertion, and/or
@@ -1011,31 +1011,31 @@ done:
  * Programmer:  John Mainzer
  *		6/2/04
  *
- * Changes:	Modified function to test for slist chamges in 
+ * Changes:	Modified function to test for slist chamges in
  *		pre_serialize and serialize callbacks, and re-start
  *		scans through the slist when such changes occur.
  *
  *		This has been a potential problem for some time,
- *		and there has been code in this function to deal 
- *		with elements of this issue.  However the shift 
+ *		and there has been code in this function to deal
+ *		with elements of this issue.  However the shift
  *		to the V3 cache in combination with the activities
- *		of some of the cache clients (in particular the 
+ *		of some of the cache clients (in particular the
  *		free space manager and the fractal heap) have
  *		made this re-work necessary.
  *
  *						JRM -- 12/13/14
  *
- *		Modified function to support rings.  Basic idea is that 
+ *		Modified function to support rings.  Basic idea is that
  *		every entry in the cache is assigned to a ring.  Entries
- *		in the outermost ring are flushed first, followed by 
- *		those in the next outermost ring, and so on until the 
- *		innermost ring is flushed.  See header comment on 
- *		H5C_ring_t in H5Cprivate.h for a more detailed 
+ *		in the outermost ring are flushed first, followed by
+ *		those in the next outermost ring, and so on until the
+ *		innermost ring is flushed.  See header comment on
+ *		H5C_ring_t in H5Cprivate.h for a more detailed
  *		discussion.
  *
  *						JRM -- 8/30/15
  *
- *		Modified function to call the free space manager 
+ *		Modified function to call the free space manager
  *		settling functions.
  *						JRM -- 6/9/16
  *
@@ -1111,7 +1111,7 @@ H5C_flush_cache(H5F_t *f, unsigned flags)
             HGOTO_ERROR(H5E_CACHE, H5E_CANTFLUSH, FAIL, "flush invalidate failed")
     } /* end if */
     else {
-	/* flush each ring, starting from the outermost ring and 
+	/* flush each ring, starting from the outermost ring and
          * working inward.
          */
         ring = H5C_RING_USER;
@@ -2245,7 +2245,7 @@ H5C_protect(H5F_t *		f,
 
         if(entry_ptr->prefetched) {
             /* This call removes the prefetched entry from the cache,
-             * and replaces it with an entry deserialized from the 
+             * and replaces it with an entry deserialized from the
              * image of the prefetched entry.
              */
             if(H5C__deserialize_prefetched_entry(f, cache_ptr, &entry_ptr, type, addr, udata) < 0)
@@ -2314,7 +2314,7 @@ H5C_protect(H5F_t *		f,
         if(cache_ptr->ignore_tags != TRUE) {
             haddr_t tag;              /* Tag value */
 
-            /* The entry is already in the cache, but make sure that the tag value 
+            /* The entry is already in the cache, but make sure that the tag value
              * is still legal. This will ensure that had the entry NOT been in the
              * cache, tagging was still set up correctly and it would have received
              * a legal tag value after getting loaded from disk.
@@ -2322,7 +2322,7 @@ H5C_protect(H5F_t *		f,
 
             /* Get the tag */
             tag = H5CX_get_tag();
-    
+
             if(H5C_verify_tag(entry_ptr->type->id, tag) < 0)
                 HGOTO_ERROR(H5E_CACHE, H5E_CANTGET, NULL, "tag verification failed")
         } /* end if */
@@ -2338,9 +2338,9 @@ H5C_protect(H5F_t *		f,
 
         hit = FALSE;
 
-        if(NULL == (thing = H5C_load_entry(f, 
+        if(NULL == (thing = H5C_load_entry(f,
 #ifdef H5_HAVE_PARALLEL
-                                           coll_access, 
+                                           coll_access,
 #endif /* H5_HAVE_PARALLEL */
                                            type, addr, udata)))
             HGOTO_ERROR(H5E_CACHE, H5E_CANTLOAD, NULL, "can't load entry")
@@ -2449,12 +2449,12 @@ H5C_protect(H5F_t *		f,
          *   *******************************************
          *
          * Set the flush_last field
- 	 * of the newly loaded entry before inserting it into the 
-         * index.  Must do this, as the index tracked the number of 
-         * entries with the flush_last field set, but assumes that 
+ 	 * of the newly loaded entry before inserting it into the
+         * index.  Must do this, as the index tracked the number of
+         * entries with the flush_last field set, but assumes that
          * the field will not change after insertion into the index.
          *
-         * Note that this means that the H5C__FLUSH_LAST_FLAG flag 
+         * Note that this means that the H5C__FLUSH_LAST_FLAG flag
          * is ignored if the entry is already in cache.
          */
         entry_ptr->flush_me_last = flush_last;
@@ -2486,7 +2486,7 @@ H5C_protect(H5F_t *		f,
 	    HDassert(entry_ptr->ro_ref_count > 0);
 	    (entry_ptr->ro_ref_count)++;
 	} /* end if */
-        else 
+        else
             HGOTO_ERROR(H5E_CACHE, H5E_CANTPROTECT, NULL, "Target already protected & not read only?!?")
     } /* end if */
     else {
@@ -2890,7 +2890,7 @@ done:
  *              3/22/06
  *
  * Changes:	Added extreme sanity checks on entry and exit.
-                				JRM -- 4/26/14 
+                				JRM -- 4/26/14
  *
  *-------------------------------------------------------------------------
  */
@@ -3112,7 +3112,7 @@ H5C_unprotect(H5F_t *f, haddr_t	addr, void *thing, unsigned flags)
             if(entry_ptr->flush_dep_nparents > 0)
                 if(H5C__mark_flush_dep_dirty(entry_ptr) < 0)
                     HGOTO_ERROR(H5E_CACHE, H5E_CANTMARKDIRTY, FAIL, "Can't propagate flush dep dirty flag")
-        } /* end if */ 
+        } /* end if */
         /* Check for newly clean entry */
         else if(!was_clean && !entry_ptr->is_dirty) {
             /* If the entry's type has a 'notify' callback send a 'entry cleaned'
@@ -3969,8 +3969,8 @@ H5C__auto_adjust_cache_size(H5F_t *f, hbool_t write_permitted)
     HDassert( (cache_ptr->resize_ctl).min_clean_fraction <= (double)100.0f );
 
     /* check to see if cache_ptr->resize_in_progress is TRUE.  If it, this
-     * is a re-entrant call via a client callback called in the resize 
-     * process.  To avoid an infinite recursion, set reentrant_call to 
+     * is a re-entrant call via a client callback called in the resize
+     * process.  To avoid an infinite recursion, set reentrant_call to
      * TRUE, and goto done.
      */
     if(cache_ptr->resize_in_progress) {
@@ -5157,7 +5157,7 @@ H5C__flush_invalidate_cache(H5F_t *f, unsigned flags)
         while(entry_ptr) {
             /* Check ring */
             HDassert(entry_ptr->ring == H5C_RING_SB);
-            
+
             /* Advance to next entry in pinned entry list */
             entry_ptr = entry_ptr->next;
         } /* end while */
@@ -5199,7 +5199,7 @@ done:
  *		until either the cache is empty, or the number of pinned
  *		entries stops decreasing on each pass.
  *
- *		If flush dependencies appear in the target ring, the 
+ *		If flush dependencies appear in the target ring, the
  *		function makes repeated passes through the cache flushing
  *		entries in flush dependency order.
  *
@@ -5252,8 +5252,8 @@ H5C_flush_invalidate_ring(H5F_t * f, H5C_ring_t ring, unsigned flags)
     /* The flush procedure here is a bit strange.
      *
      * In the outer while loop we make at least one pass through the
-     * cache, and then repeat until either all the pinned entries in 
-     * the ring unpin themselves, or until the number of pinned entries 
+     * cache, and then repeat until either all the pinned entries in
+     * the ring unpin themselves, or until the number of pinned entries
      * in the ring stops declining.  In this later case, we scream and die.
      *
      * Since the fractal heap can dirty, resize, and/or move entries
@@ -5309,9 +5309,9 @@ H5C_flush_invalidate_ring(H5F_t * f, H5C_ring_t ring, unsigned flags)
 
         /* There is also the possibility that entries will be
          * dirtied, resized, moved, and/or removed from the cache
-         * as the result of calls to the flush callbacks.  We use 
-         * the slist_len_increase and slist_size_increase increase 
-         * fields in struct H5C_t to track these changes for purpose 
+         * as the result of calls to the flush callbacks.  We use
+         * the slist_len_increase and slist_size_increase increase
+         * fields in struct H5C_t to track these changes for purpose
          * of sanity checking.
          *
          * To this end, we must zero these fields before we start
@@ -5326,8 +5326,8 @@ H5C_flush_invalidate_ring(H5F_t * f, H5C_ring_t ring, unsigned flags)
          * This flag is set to TRUE by H5C__flush_single_entry if the slist
          * is modified by a pre_serialize, serialize, or notify callback.
          *
-         * H5C_flush_invalidate_ring() uses this flag to detect any 
-         * modifications to the slist that might corrupt the scan of 
+         * H5C_flush_invalidate_ring() uses this flag to detect any
+         * modifications to the slist that might corrupt the scan of
          * the slist -- and restart the scan in this event.
          */
         cache_ptr->slist_changed = FALSE;
@@ -5357,14 +5357,14 @@ H5C_flush_invalidate_ring(H5F_t * f, H5C_ring_t ring, unsigned flags)
 
             entry_ptr = next_entry_ptr;
 
-            /* It is possible that entries will be dirtied, resized, 
+            /* It is possible that entries will be dirtied, resized,
              * flushed, or removed from the cache via the take ownership
-             * flag as the result of pre_serialize or serialized callbacks. 
-             * 
+             * flag as the result of pre_serialize or serialized callbacks.
+             *
              * This in turn can corrupt the scan through the slist.
              *
-             * We test for slist modifications in the pre_serialize 
-             * and serialize callbacks, and restart the scan of the 
+             * We test for slist modifications in the pre_serialize
+             * and serialize callbacks, and restart the scan of the
              * slist if we find them.  However, best we do some extra
              * sanity checking just in case.
              */
@@ -5497,8 +5497,8 @@ H5C_flush_invalidate_ring(H5F_t * f, H5C_ring_t ring, unsigned flags)
             if((!entry_ptr->flush_me_last || (entry_ptr->flush_me_last && cache_ptr->num_last_entries >= cache_ptr->slist_len))
                     && entry_ptr->flush_dep_nchildren == 0 && entry_ptr->ring == ring) {
                 if(entry_ptr->is_protected) {
-                    /* we have major problems -- but lets flush and 
-                     * destroy everything we can before we flag an 
+                    /* we have major problems -- but lets flush and
+                     * destroy everything we can before we flag an
                      * error.
                      */
                     protected_entries++;
@@ -5506,9 +5506,9 @@ H5C_flush_invalidate_ring(H5F_t * f, H5C_ring_t ring, unsigned flags)
                         HDassert(!(entry_ptr->is_dirty));
                 } /* end if */
                 else if(!(entry_ptr->is_pinned)) {
-                    /* if *entry_ptr is dirty, it is possible 
-                     * that one or more other entries may be 
-                     * either removed from the cache, loaded 
+                    /* if *entry_ptr is dirty, it is possible
+                     * that one or more other entries may be
+                     * either removed from the cache, loaded
                      * into the cache, or moved to a new location
                      * in the file as a side effect of the flush.
                      *
@@ -5517,14 +5517,14 @@ H5C_flush_invalidate_ring(H5F_t * f, H5C_ring_t ring, unsigned flags)
                      * entry, allowing it to be removed also and
                      * invalidating the next_entry_ptr.
                      *
-                     * If either of these happen, and one of the target 
-                     * or proxy entries happens to be the next entry in 
+                     * If either of these happen, and one of the target
+                     * or proxy entries happens to be the next entry in
                      * the hash bucket, we could either find ourselves
                      * either scanning a non-existant entry, scanning
                      * through a different bucket, or skipping an entry.
                      *
-                     * Neither of these are good, so restart the 
-                     * the scan at the head of the hash bucket 
+                     * Neither of these are good, so restart the
+                     * the scan at the head of the hash bucket
                      * after the flush if we detect that the next_entry_ptr
                      * becomes invalid.
                      *
@@ -5538,11 +5538,11 @@ H5C_flush_invalidate_ring(H5F_t * f, H5C_ring_t ring, unsigned flags)
                         HGOTO_ERROR(H5E_CACHE, H5E_CANTFLUSH, FAIL, "Entry flush destroy failed")
 
                     /* Restart the index list scan if necessary.  Must
-                     * do this if the next entry is evicted, and also if 
+                     * do this if the next entry is evicted, and also if
                      * one or more entries are inserted, loaded, or moved
                      * as these operations can result in part of the scan
                      * being skipped -- which can cause a spurious failure
-                     * if this results in the size of the pinned entry 
+                     * if this results in the size of the pinned entry
                      * failing to decline during the pass.
                      */
                     if((NULL != next_entry_ptr && NULL == cache_ptr->entry_watched_for_removal)
@@ -5585,7 +5585,7 @@ H5C_flush_invalidate_ring(H5F_t * f, H5C_ring_t ring, unsigned flags)
             entry_ptr = entry_ptr->next;
         } /* end while */
 
-       /* Check if the number of pinned entries in the ring is positive, and 
+       /* Check if the number of pinned entries in the ring is positive, and
         * it is not declining.  Scream and die if so.
         */
         if(cur_ring_pel_len > 0 && cur_ring_pel_len >= old_ring_pel_len) {
@@ -5628,16 +5628,16 @@ done:
 /*-------------------------------------------------------------------------
  * Function:    H5C__flush_ring
  *
- * Purpose:	Flush the entries contained in the specified cache and 
+ * Purpose:	Flush the entries contained in the specified cache and
  *		ring.  All entries in rings outside the specified ring
  *		must have been flushed on entry.
  *
  *		If the cache contains protected entries in the specified
- *		ring, the function will fail, as protected entries cannot 
+ *		ring, the function will fail, as protected entries cannot
  *		be flushed.  However all unprotected entries in the target
  *		ring should be flushed before the function returns failure.
  *
- *		If flush dependencies appear in the target ring, the 
+ *		If flush dependencies appear in the target ring, the
  *		function makes repeated passes through the slist flushing
  *		entries in flush dependency order.
  *
@@ -5703,10 +5703,10 @@ H5C__flush_ring(H5F_t *f, H5C_ring_t ring, unsigned flags)
 
     /* Set the cache_ptr->slist_changed to false.
      *
-     * This flag is set to TRUE by H5C__flush_single_entry if the 
+     * This flag is set to TRUE by H5C__flush_single_entry if the
      * slist is modified by a pre_serialize, serialize, or notify callback.
      * H5C_flush_cache uses this flag to detect any modifications
-     * to the slist that might corrupt the scan of the slist -- and 
+     * to the slist that might corrupt the scan of the slist -- and
      * restart the scan in this event.
      */
     cache_ptr->slist_changed = FALSE;
@@ -5726,8 +5726,8 @@ H5C__flush_ring(H5F_t *f, H5C_ring_t ring, unsigned flags)
          *
          * To make things more entertaining, with the advent of the
          * fractal heap, the entry serialize callback can cause entries
-         * to be dirtied, resized, and/or moved.  Also, the 
-         * pre_serialize callback can result in an entry being 
+         * to be dirtied, resized, and/or moved.  Also, the
+         * pre_serialize callback can result in an entry being
          * removed from the cache via the take ownership flag.
          *
          * To deal with this, we first make note of the initial
@@ -5778,24 +5778,24 @@ H5C__flush_ring(H5F_t *f, H5C_ring_t ring, unsigned flags)
                 HDassert(next_entry_ptr->is_dirty);
                 HDassert(next_entry_ptr->in_slist);
             } /* end if */
-                
+
             entry_ptr = next_entry_ptr;
 
             /* With the advent of the fractal heap, the free space
              * manager, and the version 3 cache, it is possible
-             * that the pre-serialize or serialize callback will 
-             * dirty, resize, or take ownership of other entries 
-             * in the cache.  
+             * that the pre-serialize or serialize callback will
+             * dirty, resize, or take ownership of other entries
+             * in the cache.
              *
              * To deal with this, I have inserted code to detect any
              * change in the skip list not directly under the control
              * of this function.  If such modifications are detected,
-             * we must re-start the scan of the skip list to avoid 
+             * we must re-start the scan of the skip list to avoid
              * the possibility that the target of the next_entry_ptr
              * may have been flushed or deleted from the cache.
              *
              * To verify that all such possibilities have been dealt
-             * with, we do a bit of extra sanity checking on 
+             * with, we do a bit of extra sanity checking on
              * entry_ptr.
              */
             HDassert(entry_ptr->magic == H5C__H5C_CACHE_ENTRY_T_MAGIC);
@@ -5825,20 +5825,20 @@ H5C__flush_ring(H5F_t *f, H5C_ring_t ring, unsigned flags)
             else
                 next_entry_ptr = NULL;
 
-            if((!flush_marked_entries || entry_ptr->flush_marker) 
+            if((!flush_marked_entries || entry_ptr->flush_marker)
                     && (!entry_ptr->flush_me_last ||
-                        (entry_ptr->flush_me_last 
+                        (entry_ptr->flush_me_last
                             && (cache_ptr->num_last_entries >= cache_ptr->slist_len
-                               || (flush_marked_entries && entry_ptr->flush_marker)))) 
+                               || (flush_marked_entries && entry_ptr->flush_marker))))
                     && (entry_ptr->flush_dep_nchildren == 0
-                        || entry_ptr->flush_dep_ndirty_children == 0) 
+                        || entry_ptr->flush_dep_ndirty_children == 0)
                     && entry_ptr->ring == ring) {
 
                 HDassert(entry_ptr->flush_dep_nunser_children == 0);
 
                 if(entry_ptr->is_protected) {
-                    /* we probably have major problems -- but lets 
-                     * flush everything we can before we decide 
+                    /* we probably have major problems -- but lets
+                     * flush everything we can before we decide
                      * whether to flag an error.
                      */
                     tried_to_flush_protected_entry = TRUE;
@@ -5850,9 +5850,9 @@ H5C__flush_ring(H5F_t *f, H5C_ring_t ring, unsigned flags)
 
                     if(cache_ptr->slist_changed) {
                         /* The slist has been modified by something
-                         * other than the simple removal of the 
+                         * other than the simple removal of the
                          * of the flushed entry after the flush.
-                         * 
+                         *
                          * This has the potential to corrupt the
                          * scan through the slist, so restart it.
                          */
@@ -5980,11 +5980,11 @@ H5C__flush_single_entry(H5F_t *f, H5C_cache_entry_t *entry_ptr, unsigned flags)
     else
         write_entry = FALSE;
 
-    /* if we have received close warning, and we have been instructed to 
+    /* if we have received close warning, and we have been instructed to
      * generate a metadata cache image, and we have actually constructed
      * the entry images, set suppress_image_entry_frees to TRUE.
      *
-     * Set suppress_image_entry_writes to TRUE if indicated by the 
+     * Set suppress_image_entry_writes to TRUE if indicated by the
      * image_ctl flags.
      */
     if(cache_ptr->close_warning_received && cache_ptr->image_ctl.generate_image
@@ -6063,11 +6063,11 @@ H5C__flush_single_entry(H5F_t *f, H5C_cache_entry_t *entry_ptr, unsigned flags)
         } /* end if ( ! (entry_ptr->image_up_to_date) ) */
     } /* end if */
 
-    /* Finally, write the image to disk.  
-     * 
-     * Note that if the H5AC__CLASS_SKIP_WRITES flag is set in the 
+    /* Finally, write the image to disk.
+     *
+     * Note that if the H5AC__CLASS_SKIP_WRITES flag is set in the
      * in the entry's type, we silently skip the write.  This
-     * flag should only be used in test code. 
+     * flag should only be used in test code.
      */
     if(write_entry) {
         HDassert(entry_ptr->is_dirty);
@@ -6079,8 +6079,8 @@ H5C__flush_single_entry(H5F_t *f, H5C_cache_entry_t *entry_ptr, unsigned flags)
 
         /* Write the image to disk unless the write is suppressed.
          *
-         * This happens if both suppress_image_entry_writes and 
-         * entry_ptr->include_in_image are TRUE, or if the 
+         * This happens if both suppress_image_entry_writes and
+         * entry_ptr->include_in_image are TRUE, or if the
          * H5AC__CLASS_SKIP_WRITES is set in the entry's type.  This
          * flag should only be used in test code
          */
@@ -6113,7 +6113,7 @@ H5C__flush_single_entry(H5F_t *f, H5C_cache_entry_t *entry_ptr, unsigned flags)
 #endif /* H5_HAVE_PARALLEL */
         } /* end if */
 
-        /* if the entry has a notify callback, notify it that we have 
+        /* if the entry has a notify callback, notify it that we have
          * just flushed the entry.
          */
         if(entry_ptr->type->notify &&
@@ -6125,7 +6125,7 @@ H5C__flush_single_entry(H5F_t *f, H5C_cache_entry_t *entry_ptr, unsigned flags)
      * made if it was appropriate to make them.  Similarly, the entry
      * has been written to disk if desired.
      *
-     * Thus it is now safe to update the cache data structures for the 
+     * Thus it is now safe to update the cache data structures for the
      * flush.
      */
 
@@ -6179,7 +6179,7 @@ H5C__flush_single_entry(H5F_t *f, H5C_cache_entry_t *entry_ptr, unsigned flags)
          *
          * 5) Remove it from the tag list for this object
          *
-         * Finally, if the destroy_entry flag is set, discard the 
+         * Finally, if the destroy_entry flag is set, discard the
          * entry.
          */
         H5C__DELETE_FROM_INDEX(cache_ptr, entry_ptr, FAIL)
@@ -6213,7 +6213,7 @@ H5C__flush_single_entry(H5F_t *f, H5C_cache_entry_t *entry_ptr, unsigned flags)
         /* We are either doing a flush or a clear.
          *
          * A clear and a flush are the same from the point of
-         * view of the replacement policy and the slist.  
+         * view of the replacement policy and the slist.
          * Hence no differentiation between them.
          *
          * 					JRM -- 7/7/07
@@ -6223,8 +6223,8 @@ H5C__flush_single_entry(H5F_t *f, H5C_cache_entry_t *entry_ptr, unsigned flags)
 
         H5C__REMOVE_ENTRY_FROM_SLIST(cache_ptr, entry_ptr, during_flush)
 
-        /* mark the entry as clean and update the index for 
-         * entry clean.  Also, call the clear callback 
+        /* mark the entry as clean and update the index for
+         * entry clean.  Also, call the clear callback
          * if defined.
          */
         entry_ptr->is_dirty = FALSE;
@@ -6256,8 +6256,8 @@ H5C__flush_single_entry(H5F_t *f, H5C_cache_entry_t *entry_ptr, unsigned flags)
        end before the entry_ptr gets freed */
     entry_addr = entry_ptr->addr;
 
-    /* Internal cache data structures should now be up to date, and 
-     * consistent with the status of the entry.  
+    /* Internal cache data structures should now be up to date, and
+     * consistent with the status of the entry.
      *
      * Now discard the entry if appropriate.
      */
@@ -6266,18 +6266,18 @@ H5C__flush_single_entry(H5F_t *f, H5C_cache_entry_t *entry_ptr, unsigned flags)
         HDassert(0 == entry_ptr->flush_dep_nparents);
 
         /* if both suppress_image_entry_frees and entry_ptr->include_in_image
-         * are true, simply set entry_ptr->image_ptr to NULL, as we have 
+         * are true, simply set entry_ptr->image_ptr to NULL, as we have
          * another pointer to the buffer in an instance of H5C_image_entry_t
          * in cache_ptr->image_entries.
          *
          * Otherwise, free the buffer if it exists.
          */
-        if(suppress_image_entry_frees && entry_ptr->include_in_image) 
+        if(suppress_image_entry_frees && entry_ptr->include_in_image)
             entry_ptr->image_ptr = NULL;
         else if(entry_ptr->image_ptr != NULL)
             entry_ptr->image_ptr = H5MM_xfree(entry_ptr->image_ptr);
 
-        /* If the entry is not a prefetched entry, verify that the flush 
+        /* If the entry is not a prefetched entry, verify that the flush
          * dependency parents addresses array has been transferred.
          *
          * If the entry is prefetched, the free_isr routine will dispose of
@@ -6288,8 +6288,8 @@ H5C__flush_single_entry(H5F_t *f, H5C_cache_entry_t *entry_ptr, unsigned flags)
             HDassert(NULL == entry_ptr->fd_parent_addrs);
         } /* end if */
 
-        /* Check whether we should free the space in the file that 
-         * the entry occupies 
+        /* Check whether we should free the space in the file that
+         * the entry occupies
          */
         if(free_file_space) {
             hsize_t fsf_size;
@@ -6326,14 +6326,14 @@ H5C__flush_single_entry(H5F_t *f, H5C_cache_entry_t *entry_ptr, unsigned flags)
         /* Reset the pointer to the cache the entry is within. -QAK */
         entry_ptr->cache_ptr = NULL;
 
-        /* increment entries_removed_counter and set 
-         * last_entry_removed_ptr.  As we are likely abuut to 
-         * free the entry, recall that last_entry_removed_ptr 
+        /* increment entries_removed_counter and set
+         * last_entry_removed_ptr.  As we are likely abuut to
+         * free the entry, recall that last_entry_removed_ptr
          * must NEVER be dereferenced.
          *
          * Recall that these fields are maintained to allow functions
-         * that perform scans of lists of entries to detect the 
-         * unexpected removal of entries (via expunge, eviction, 
+         * that perform scans of lists of entries to detect the
+         * unexpected removal of entries (via expunge, eviction,
          * or take ownership at present), so that they can re-start
          * their scans if necessary.
          *
@@ -6377,15 +6377,15 @@ H5C__flush_single_entry(H5F_t *f, H5C_cache_entry_t *entry_ptr, unsigned flags)
             HDassert(take_ownership);
 
             /* client is taking ownership of the entry.
-             * set bad magic here too so the cache will choke 
+             * set bad magic here too so the cache will choke
              * unless the entry is re-inserted properly
              */
             entry_ptr->magic = H5C__H5C_CACHE_ENTRY_T_BAD_MAGIC;
         } /* end else */
     } /* if (destroy) */
 
-    /* Check if we have to update the page buffer with cleared entries 
-     * so it doesn't go out of date 
+    /* Check if we have to update the page buffer with cleared entries
+     * so it doesn't go out of date
      */
     if(update_page_buffer) {
         /* Sanity check */
@@ -6402,9 +6402,9 @@ H5C__flush_single_entry(H5F_t *f, H5C_cache_entry_t *entry_ptr, unsigned flags)
             HGOTO_ERROR(H5E_CACHE, H5E_CANTFLUSH, FAIL, "log_flush callback failed")
 
 done:
-    HDassert( ( ret_value != SUCCEED ) || ( destroy_entry ) || 
+    HDassert( ( ret_value != SUCCEED ) || ( destroy_entry ) ||
               ( ! entry_ptr->flush_in_progress ) );
-    HDassert( ( ret_value != SUCCEED ) || ( destroy_entry ) || 
+    HDassert( ( ret_value != SUCCEED ) || ( destroy_entry ) ||
               ( take_ownership ) || ( ! entry_ptr->is_dirty ) );
 
     FUNC_LEAVE_NOAPI(ret_value)
@@ -6421,7 +6421,7 @@ done:
  *              If exceed, adjust 'len' accordingly.
  *
  *              Verify that 'len' should not exceed eoa when 'actual' is
- *              true i.e. 'len' is the actual length from get_load_size 
+ *              true i.e. 'len' is the actual length from get_load_size
  *              callback with non-null image pointer.
  *              If exceed, return error.
  *
@@ -6442,7 +6442,7 @@ H5C__verify_len_eoa(H5F_t *f, const H5C_class_t *type, haddr_t addr,
 
     FUNC_ENTER_STATIC
 
-    /* if type == H5FD_MEM_GHEAP, H5F_block_read() forces 
+    /* if type == H5FD_MEM_GHEAP, H5F_block_read() forces
      * type to H5FD_MEM_DRAW via its call to H5F__accum_read().
      * Thus we do the same for purposes of computing the EOA
      * for sanity checks.
@@ -6574,7 +6574,7 @@ H5C_load_entry(H5F_t *              f,
         /* Get the # of read attempts */
         max_tries = tries = H5F_GET_READ_ATTEMPTS(f);
 
-        /* 
+        /*
          * This do/while loop performs the following till the metadata checksum
          * is correct or the file's number of allowed read attempts are reached.
          *   --read the metadata
@@ -6874,8 +6874,8 @@ H5C__make_space_in_cache(H5F_t *f, size_t space_needed, hbool_t	write_permitted)
     HDassert(cache_ptr->index_size == (cache_ptr->clean_index_size + cache_ptr->dirty_index_size));
 
     /* check to see if cache_ptr->msic_in_progress is TRUE.  If it, this
-     * is a re-entrant call via a client callback called in the make 
-     * space in cache process.  To avoid an infinite recursion, set 
+     * is a re-entrant call via a client callback called in the make
+     * space in cache process.  To avoid an infinite recursion, set
      * reentrant_call to TRUE, and goto done.
      */
     if(cache_ptr->msic_in_progress) {
@@ -6947,9 +6947,9 @@ H5C__make_space_in_cache(H5F_t *f, size_t space_needed, hbool_t	write_permitted)
                     }
 #endif /* H5C_COLLECT_CACHE_STATS */
 
-		    /* reset entries_removed_counter and 
-                     * last_entry_removed_ptr prior to the call to 
-                     * H5C__flush_single_entry() so that we can spot 
+		    /* reset entries_removed_counter and
+                     * last_entry_removed_ptr prior to the call to
+                     * H5C__flush_single_entry() so that we can spot
                      * unexpected removals of entries from the cache,
                      * and set the restart_scan flag if proceeding
                      * would be likely to cause us to scan an entry
@@ -6966,7 +6966,7 @@ H5C__make_space_in_cache(H5F_t *f, size_t space_needed, hbool_t	write_permitted)
 
                         restart_scan = TRUE;
 
-                } else if ( (cache_ptr->index_size + space_needed) > cache_ptr->max_cache_size 
+                } else if ( (cache_ptr->index_size + space_needed) > cache_ptr->max_cache_size
 #ifdef H5_HAVE_PARALLEL
                             && !(entry_ptr->coll_access)
 #endif /* H5_HAVE_PARALLEL */
@@ -7124,7 +7124,7 @@ H5C__make_space_in_cache(H5F_t *f, size_t space_needed, hbool_t	write_permitted)
 
             prev_ptr = entry_ptr->aux_prev;
 
-            if ( ( !(entry_ptr->prefetched_dirty) ) 
+            if ( ( !(entry_ptr->prefetched_dirty) )
 #ifdef H5_HAVE_PARALLEL
                  && ( ! (entry_ptr->coll_access) )
 #endif /* H5_HAVE_PARALLEL */
@@ -7174,7 +7174,7 @@ done:
  *
  * Changes:
  *
- *		Added code to verify that the LRU contains no pinned 
+ *		Added code to verify that the LRU contains no pinned
  *		entries.                        JRM -- 4/25/14
  *
  *-------------------------------------------------------------------------
@@ -7254,7 +7254,7 @@ H5C_validate_lru_list(H5C_t * cache_ptr)
             HGOTO_ERROR(H5E_CACHE, H5E_SYSTEM, FAIL, "Check 6 failed")
         }
 
-        if ( ( entry_ptr->is_pinned ) || 
+        if ( ( entry_ptr->is_pinned ) ||
              ( entry_ptr->pinned_from_client ) ||
              ( entry_ptr->pinned_from_cache ) ) {
 
@@ -7290,7 +7290,7 @@ done:
  *
  * Function:    H5C_validate_pinned_entry_list
  *
- * Purpose:     Debugging function that scans the pinned entry list for 
+ * Purpose:     Debugging function that scans the pinned entry list for
  *              errors.
  *
  *		If an error is detected, the function generates a
@@ -7422,7 +7422,7 @@ done:
  *
  * Function:    H5C_validate_protected_entry_list
  *
- * Purpose:     Debugging function that scans the protected entry list for 
+ * Purpose:     Debugging function that scans the protected entry list for
  *              errors.
  *
  *		If an error is detected, the function generates a
@@ -7547,11 +7547,11 @@ done:
  *
  * Function:    H5C_entry_in_skip_list
  *
- * Purpose:     Debugging function that scans skip list to see if it 
- *		is in present.  We need this, as it is possible for 
+ * Purpose:     Debugging function that scans skip list to see if it
+ *		is in present.  We need this, as it is possible for
  *		an entry to be in the skip list twice.
  *
- * Return:      FALSE if the entry is not in the skip list, and TRUE 
+ * Return:      FALSE if the entry is not in the skip list, and TRUE
  *		if it is.
  *
  * Programmer:  John Mainzer, 11/1/14
@@ -7617,7 +7617,7 @@ H5C_entry_in_skip_list(H5C_t * cache_ptr, H5C_cache_entry_t *target_ptr)
  */
 herr_t
 H5C__flush_marked_entries(H5F_t * f)
-{ 
+{
     herr_t ret_value = SUCCEED;
 
     FUNC_ENTER_PACKAGE
@@ -7639,7 +7639,7 @@ done:
  * Function:    H5C_cork
  *
  * Purpose:     To cork/uncork/get cork status of an object depending on "action":
- *		H5C__SET_CORK: 
+ *		H5C__SET_CORK:
  *			To cork the object
  *			Return error if the object is already corked
  *		H5C__UNCORK:
@@ -7648,7 +7648,7 @@ done:
  * 		H5C__GET_CORKED:
  *			To retrieve the cork status of an object in
  *			the parameter "corked"
- *		
+ *
  * Return:      Success:        Non-negative
  *              Failure:        Negative
  *
@@ -7658,7 +7658,7 @@ done:
  *-------------------------------------------------------------------------
  */
 herr_t
-H5C_cork(H5C_t *cache_ptr, haddr_t obj_addr, unsigned action, hbool_t *corked) 
+H5C_cork(H5C_t *cache_ptr, haddr_t obj_addr, unsigned action, hbool_t *corked)
 {
     H5C_tag_info_t *tag_info;	/* Points to a tag info struct */
     herr_t              ret_value = SUCCEED;
@@ -7840,8 +7840,8 @@ done:
 /*-------------------------------------------------------------------------
  * Function:    H5C__mark_flush_dep_serialized()
  *
- * Purpose:     Decrement the flush_dep_nunser_children fields of all the 
- *		target entry's flush dependency parents in response to 
+ * Purpose:     Decrement the flush_dep_nunser_children fields of all the
+ *		target entry's flush dependency parents in response to
  *		the target entry becoming serialized.
  *
  * Return:      Non-negative on success/Negative on failure
@@ -7890,7 +7890,7 @@ done:
  * Function:    H5C__mark_flush_dep_unserialized()
  *
  * Purpose:     Increment the flush_dep_nunser_children fields of all the
- *              target entry's flush dependency parents in response to 
+ *              target entry's flush dependency parents in response to
  *              the target entry becoming unserialized.
  *
  * Return:      Non-negative on success/Negative on failure
@@ -7916,7 +7916,7 @@ H5C__mark_flush_dep_unserialized(H5C_cache_entry_t * entry_ptr)
         /* Sanity check */
         HDassert(entry_ptr->flush_dep_parent);
         HDassert(entry_ptr->flush_dep_parent[u]->magic == H5C__H5C_CACHE_ENTRY_T_MAGIC);
-        HDassert(entry_ptr->flush_dep_parent[u]->flush_dep_nunser_children < 
+        HDassert(entry_ptr->flush_dep_parent[u]->flush_dep_nunser_children <
                  entry_ptr->flush_dep_parent[u]->flush_dep_nchildren);
 
         /* increment parents number of usserialized children */
@@ -7976,11 +7976,11 @@ H5C__assert_flush_dep_nocycle(const H5C_cache_entry_t * entry,
 /*-------------------------------------------------------------------------
  * Function:    H5C__serialize_cache
  *
- * Purpose:	Serialize (i.e. construct an on disk image) for all entries 
- *		in the metadata cache including clean entries.  
+ * Purpose:	Serialize (i.e. construct an on disk image) for all entries
+ *		in the metadata cache including clean entries.
  *
  *		Note that flush dependencies and "flush me last" flags
- *		must be observed in the serialization process.  
+ *		must be observed in the serialization process.
  *
  *		Note also that entries may be loaded, flushed, evicted,
  *		expunged, relocated, resized, or removed from the cache
@@ -7988,17 +7988,17 @@ H5C__assert_flush_dep_nocycle(const H5C_cache_entry_t * entry,
  *		a regular flush.
  *
  *		However, we are given that the cache will contain no protected
- *		entries on entry to this routine (although entries may be 
- *		briefly protected and then unprotected during the serialize 
- *		process).  
+ *		entries on entry to this routine (although entries may be
+ *		briefly protected and then unprotected during the serialize
+ *		process).
  *
- *		The objective of this routine is serialize all entries and 
- *		to force all entries into their actual locations on disk.  
+ *		The objective of this routine is serialize all entries and
+ *		to force all entries into their actual locations on disk.
  *
- *		The initial need for this routine is to settle all entries 
- *		in the cache prior to construction of the metadata cache 
+ *		The initial need for this routine is to settle all entries
+ *		in the cache prior to construction of the metadata cache
  *		image so that the size of the cache image can be calculated.
- *		However, I gather that other uses for the routine are 
+ *		However, I gather that other uses for the routine are
  *		under consideration.
  *
  * Return:      Non-negative on success/Negative on failure or if there was
@@ -8069,10 +8069,10 @@ H5C__serialize_cache(H5F_t *f)
 #endif /* H5C_DO_EXTREME_SANITY_CHECKS */
 
 #ifndef NDEBUG
-    /* if this is a debug build, set the serialization_count field of 
+    /* if this is a debug build, set the serialization_count field of
      * each entry in the cache to zero before we start the serialization.
      * This allows us to detect the case in which any entry is serialized
-     * more than once (a performance issues), and more importantly, the 
+     * more than once (a performance issues), and more importantly, the
      * case is which any flush depencency parent is serializes more than
      * once (a correctness issue).
      */
@@ -8088,10 +8088,10 @@ H5C__serialize_cache(H5F_t *f)
      } /* end block */
 #endif /* NDEBUG */
 
-    /* set cache_ptr->serialization_in_progress to TRUE, and back 
+    /* set cache_ptr->serialization_in_progress to TRUE, and back
      * to FALSE at the end of the function.  Must maintain this flag
-     * to support H5C_get_serialization_in_progress(), which is in 
-     * turn required to support sanity checking in some cache 
+     * to support H5C_get_serialization_in_progress(), which is in
+     * turn required to support sanity checking in some cache
      * clients.
      */
     HDassert(!cache_ptr->serialization_in_progress);
@@ -8169,16 +8169,16 @@ done:
  *
  *              If the cache contains protected entries in the specified
  *              ring, the function will fail, as protected entries cannot
- *              be serialized.  However all unprotected entries in the 
- *		target ring should be serialized before the function 
+ *              be serialized.  However all unprotected entries in the
+ *		target ring should be serialized before the function
  *		returns failure.
  *
  *              If flush dependencies appear in the target ring, the
  *              function makes repeated passes through the index list
  *		serializing entries in flush dependency order.
  *
- *		All entries outside the H5C_RING_SBE are marked for 
- *		inclusion in the cache image.  Entries in H5C_RING_SBE 
+ *		All entries outside the H5C_RING_SBE are marked for
+ *		inclusion in the cache image.  Entries in H5C_RING_SBE
  *		and below are marked for exclusion from the image.
  *
  * Return:      Non-negative on success/Negative on failure or if there was
@@ -8213,76 +8213,76 @@ H5C__serialize_ring(H5F_t *f, H5C_ring_t ring)
     /* The objective here is to serialize all entries in the cache ring
      * in flush dependency order.
      *
-     * The basic algorithm is to scan the cache index list looking for 
+     * The basic algorithm is to scan the cache index list looking for
      * unserialized entries that are either not in a flush dependency
      * relationship, or which have no unserialized children.  Any such
-     * entry is serialized and its flush dependency parents (if any) are 
+     * entry is serialized and its flush dependency parents (if any) are
      * informed -- allowing them to decrement their userialized child counts.
      *
      * However, this algorithm is complicated by the ability
-     * of client serialization callbacks to perform operations on 
-     * on the cache which can result in the insertion, deletion, 
+     * of client serialization callbacks to perform operations on
+     * on the cache which can result in the insertion, deletion,
      * relocation, resize, dirty, flush, eviction, or removal (via the
      * take ownership flag) of entries.  Changes in the flush dependency
      * structure are also possible.
      *
-     * On the other hand, the algorithm is simplified by the fact that 
-     * we are serializing, not flushing.  Thus, as long as all entries 
+     * On the other hand, the algorithm is simplified by the fact that
+     * we are serializing, not flushing.  Thus, as long as all entries
      * are serialized correctly, it doesn't matter if we have to go back
      * and serialize an entry a second time.
      *
-     * These possible actions result in the following modfications to 
+     * These possible actions result in the following modfications to
      * tha basic algorithm:
      *
-     * 1) In the event of an entry expunge, eviction or removal, we must 
-     *    restart the scan as it is possible that the next entry in our 
+     * 1) In the event of an entry expunge, eviction or removal, we must
+     *    restart the scan as it is possible that the next entry in our
      *    scan is no longer in the cache.  Were we to examine this entry,
      *    we would be accessing deallocated memory.
      *
-     * 2) A resize, dirty, or insertion of an entry may result in the 
-     *    the increment of a flush dependency parent's dirty and/or 
-     *    unserialized child count.  In the context of serializing the 
-     *    the cache, this is a non-issue, as even if we have already 
-     *    serialized the parent, it will be marked dirty and its image 
-     *    marked out of date if appropriate when the child is serialized.  
-     *    
+     * 2) A resize, dirty, or insertion of an entry may result in the
+     *    the increment of a flush dependency parent's dirty and/or
+     *    unserialized child count.  In the context of serializing the
+     *    the cache, this is a non-issue, as even if we have already
+     *    serialized the parent, it will be marked dirty and its image
+     *    marked out of date if appropriate when the child is serialized.
+     *
      *    However, this is a major issue for a flush, as were this to happen
      *    in a flush, it would violate the invariant that the flush dependency
-     *    feature is intended to enforce.  As the metadata cache has no 
-     *    control over the behavior of cache clients, it has no way of 
+     *    feature is intended to enforce.  As the metadata cache has no
+     *    control over the behavior of cache clients, it has no way of
      *    preventing this behaviour.  However, it should detect it if at all
-     *    possible.  
+     *    possible.
      *
      *    Do this by maintaining a count of the number of times each entry is
-     *    serialized during a cache serialization.  If any flush dependency 
+     *    serialized during a cache serialization.  If any flush dependency
      *    parent is serialized more than once, throw an assertion failure.
      *
-     * 3) An entry relocation will typically change the location of the 
-     *    entry in the index list.  This shouldn't cause problems as we 
-     *    will scan the index list until we make a complete pass without 
-     *    finding anything to serialize -- making relocations of either 
+     * 3) An entry relocation will typically change the location of the
+     *    entry in the index list.  This shouldn't cause problems as we
+     *    will scan the index list until we make a complete pass without
+     *    finding anything to serialize -- making relocations of either
      *    the current or next entries irrelevant.
      *
-     *    Note that since a relocation may result in our skipping part of 
+     *    Note that since a relocation may result in our skipping part of
      *    the index list, we must always do at least one more pass through
      *    the index list after an entry relocation.
      *
-     * 4) Changes in the flush dependency structure are possible on 
+     * 4) Changes in the flush dependency structure are possible on
      *    entry insertion, load, expunge, evict, or remove.  Destruction
-     *    of a flush dependency has no effect, as it can only relax the 
+     *    of a flush dependency has no effect, as it can only relax the
      *    flush dependencies.  Creation of a flush dependency can create
-     *    an unserialized child of a flush dependency parent where all 
+     *    an unserialized child of a flush dependency parent where all
      *    flush dependency children were previously serialized.  Should
      *    this child dirty the flush dependency parent when it is serialized,
      *    the parent will be re-serialized.
      *
-     *    Per the discussion of 2) above, this is a non issue for cache 
+     *    Per the discussion of 2) above, this is a non issue for cache
      *    serialization, and a major problem for cache flush.  Using the
-     *    same detection mechanism, throw an assertion failure if this 
-     *    condition appears.  
+     *    same detection mechanism, throw an assertion failure if this
+     *    condition appears.
      *
-     * Observe that either eviction or removal of entries as a result of 
-     * a serialization is not a problem as long as the flush depencency 
+     * Observe that either eviction or removal of entries as a result of
+     * a serialization is not a problem as long as the flush depencency
      * tree does not change beyond the removal of a leaf.
      */
     while(!done) {
@@ -8300,7 +8300,7 @@ H5C__serialize_ring(H5F_t *f, H5C_ring_t ring)
 	    HDassert(entry_ptr->magic == H5C__H5C_CACHE_ENTRY_T_MAGIC);
 
 	    /* Verify that either the entry is already serialized, or
-             * that it is assigned to either the target or an inner 
+             * that it is assigned to either the target or an inner
              * ring.
              */
             HDassert((entry_ptr->ring >= ring) || (entry_ptr->image_up_to_date));
@@ -8367,9 +8367,9 @@ H5C__serialize_ring(H5F_t *f, H5C_ring_t ring)
     cache_ptr->entries_relocated_counter  = 0;
 
     /* At this point, all entries not marked "flush me last" and in
-     * the current ring or outside it should be serialized and have up 
-     * to date images.  Scan the index list again to serialize the 
-     * "flush me last" entries (if they are in the current ring) and to 
+     * the current ring or outside it should be serialized and have up
+     * to date images.  Scan the index list again to serialize the
+     * "flush me last" entries (if they are in the current ring) and to
      * verify that all other entries have up to date images.
      */
     entry_ptr = cache_ptr->il_head;
@@ -8422,7 +8422,7 @@ done:
 /*-------------------------------------------------------------------------
  * Function:    H5C__serialize_single_entry
  *
- * Purpose:     Serialize the cache entry pointed to by the entry_ptr 
+ * Purpose:     Serialize the cache entry pointed to by the entry_ptr
  *		parameter.
  *
  * Return:      Non-negative on success/Negative on failure
@@ -8487,12 +8487,12 @@ done:
  * Purpose:     Serialize an entry and generate its image.
  *
  * Note:	This may cause the entry to be re-sized and/or moved in
- *              the cache.  
+ *              the cache.
  *
- *              As we will not update the metadata cache's data structures 
- *              until we we finish the write, we must touch up these 
- *              data structures for size and location changes even if we 
- *              are about to delete the entry from the cache (i.e. on a 
+ *              As we will not update the metadata cache's data structures
+ *              until we we finish the write, we must touch up these
+ *              data structures for size and location changes even if we
+ *              are about to delete the entry from the cache (i.e. on a
  *              flush destroy).
  *
  * Return:      Non-negative on success/Negative on failure
@@ -8528,7 +8528,7 @@ H5C__generate_image(H5F_t *f, H5C_t *cache_ptr, H5C_cache_entry_t *entry_ptr)
     old_addr = entry_ptr->addr;
 
     /* Call client's pre-serialize callback, if there's one */
-    if(entry_ptr->type->pre_serialize && 
+    if(entry_ptr->type->pre_serialize &&
             (entry_ptr->type->pre_serialize)(f, (void *)entry_ptr,
                 entry_ptr->addr, entry_ptr->size, &new_addr, &new_len, &serialize_flags) < 0)
         HGOTO_ERROR(H5E_CACHE, H5E_CANTFLUSH, FAIL, "unable to pre-serialize entry")
@@ -8596,7 +8596,7 @@ H5C__generate_image(H5F_t *f, H5C_t *cache_ptr, H5C_cache_entry_t *entry_ptr)
              */
             H5C__UPDATE_RP_FOR_SIZE_CHANGE(cache_ptr, entry_ptr, new_len);
 
-            /* As we haven't updated the cache data structures for 
+            /* As we haven't updated the cache data structures for
              * for the flush or flush destroy yet, the entry should
              * be in the slist.  Thus update it for the size change.
              */
@@ -8608,8 +8608,8 @@ H5C__generate_image(H5F_t *f, H5C_t *cache_ptr, H5C_cache_entry_t *entry_ptr)
             entry_ptr->size = new_len;
         } /* end if */
 
-        /* If required, udate the entry and the cache data structures 
-         * for a move 
+        /* If required, udate the entry and the cache data structures
+         * for a move
          */
         if(serialize_flags & H5C__SERIALIZE_MOVED_FLAG) {
             /* Update stats and entries relocated counter */
@@ -8641,7 +8641,7 @@ H5C__generate_image(H5F_t *f, H5C_t *cache_ptr, H5C_cache_entry_t *entry_ptr)
 #endif /* H5C_DO_MEMORY_SANITY_CHECKS */
     entry_ptr->image_up_to_date = TRUE;
 
-    /* Propagate the fact that the entry is serialized up the 
+    /* Propagate the fact that the entry is serialized up the
      * flush dependency chain if appropriate.  Since the image must
      * have been out of date for this function to have been called
      * (see assertion on entry), no need to check that -- only check
@@ -8766,8 +8766,8 @@ H5C_remove_entry(void *_entry)
     if(entry == cache->entry_watched_for_removal)
         cache->entry_watched_for_removal = NULL;
 
-    /* Internal cache data structures should now be up to date, and 
-     * consistent with the status of the entry.  
+    /* Internal cache data structures should now be up to date, and
+     * consistent with the status of the entry.
      *
      * Now clean up internal cache fields if appropriate.
      */
diff --git a/src/H5CX.c b/src/H5CX.c
index 160aa84..df335ea 100644
--- a/src/H5CX.c
+++ b/src/H5CX.c
@@ -706,7 +706,7 @@ H5CX__get_context(void)
         /* No associated value with current thread - create one */
 #ifdef H5_HAVE_WIN_THREADS
         /* Win32 has to use LocalAlloc to match the LocalFree in DllMain */
-        ctx = (H5CX_node_t **)LocalAlloc(LPTR, sizeof(H5CX_node_t *)); 
+        ctx = (H5CX_node_t **)LocalAlloc(LPTR, sizeof(H5CX_node_t *));
 #else
         /* Use HDmalloc here since this has to match the HDfree in the
          * destructor and we want to avoid the codestack there.
@@ -1784,7 +1784,7 @@ H5CX_get_mpi_file_flushing(void)
 
 
 /*-------------------------------------------------------------------------
- * Function:    H5CX_get_mpio_rank0_bcast 
+ * Function:    H5CX_get_mpio_rank0_bcast
  *
  * Purpose:     Retrieves if the dataset meets read-with-rank0-and-bcast requirements for the current API call context.
  *
@@ -3120,7 +3120,7 @@ H5CX_set_mpio_actual_chunk_opt(H5D_mpio_actual_chunk_opt_mode_t mpio_actual_chun
 
     /* Sanity checks */
     HDassert(head && *head);
-    HDassert(!((*head)->ctx.dxpl_id == H5P_DEFAULT || 
+    HDassert(!((*head)->ctx.dxpl_id == H5P_DEFAULT ||
             (*head)->ctx.dxpl_id == H5P_DATASET_XFER_DEFAULT));
 
     /* Cache the value for later, marking it to set in DXPL when context popped */
@@ -3152,7 +3152,7 @@ H5CX_set_mpio_actual_io_mode(H5D_mpio_actual_io_mode_t mpio_actual_io_mode)
 
     /* Sanity checks */
     HDassert(head && *head);
-    HDassert(!((*head)->ctx.dxpl_id == H5P_DEFAULT || 
+    HDassert(!((*head)->ctx.dxpl_id == H5P_DEFAULT ||
             (*head)->ctx.dxpl_id == H5P_DATASET_XFER_DEFAULT));
 
     /* Cache the value for later, marking it to set in DXPL when context popped */
@@ -3256,7 +3256,7 @@ H5CX_test_set_mpio_coll_chunk_link_hard(int mpio_coll_chunk_link_hard)
 
     /* Sanity checks */
     HDassert(head && *head);
-    HDassert(!((*head)->ctx.dxpl_id == H5P_DEFAULT || 
+    HDassert(!((*head)->ctx.dxpl_id == H5P_DEFAULT ||
             (*head)->ctx.dxpl_id == H5P_DATASET_XFER_DEFAULT));
 
     H5CX_TEST_SET_PROP(H5D_XFER_COLL_CHUNK_LINK_HARD_NAME, mpio_coll_chunk_link_hard)
@@ -3290,7 +3290,7 @@ H5CX_test_set_mpio_coll_chunk_multi_hard(int mpio_coll_chunk_multi_hard)
 
     /* Sanity checks */
     HDassert(head && *head);
-    HDassert(!((*head)->ctx.dxpl_id == H5P_DEFAULT || 
+    HDassert(!((*head)->ctx.dxpl_id == H5P_DEFAULT ||
             (*head)->ctx.dxpl_id == H5P_DATASET_XFER_DEFAULT));
 
     H5CX_TEST_SET_PROP(H5D_XFER_COLL_CHUNK_MULTI_HARD_NAME, mpio_coll_chunk_multi_hard)
@@ -3324,7 +3324,7 @@ H5CX_test_set_mpio_coll_chunk_link_num_true(int mpio_coll_chunk_link_num_true)
 
     /* Sanity checks */
     HDassert(head && *head);
-    HDassert(!((*head)->ctx.dxpl_id == H5P_DEFAULT || 
+    HDassert(!((*head)->ctx.dxpl_id == H5P_DEFAULT ||
             (*head)->ctx.dxpl_id == H5P_DATASET_XFER_DEFAULT));
 
     H5CX_TEST_SET_PROP(H5D_XFER_COLL_CHUNK_LINK_NUM_TRUE_NAME, mpio_coll_chunk_link_num_true)
@@ -3358,7 +3358,7 @@ H5CX_test_set_mpio_coll_chunk_link_num_false(int mpio_coll_chunk_link_num_false)
 
     /* Sanity checks */
     HDassert(head && *head);
-    HDassert(!((*head)->ctx.dxpl_id == H5P_DEFAULT || 
+    HDassert(!((*head)->ctx.dxpl_id == H5P_DEFAULT ||
             (*head)->ctx.dxpl_id == H5P_DATASET_XFER_DEFAULT));
 
     H5CX_TEST_SET_PROP(H5D_XFER_COLL_CHUNK_LINK_NUM_FALSE_NAME, mpio_coll_chunk_link_num_false)
@@ -3392,7 +3392,7 @@ H5CX_test_set_mpio_coll_chunk_multi_ratio_coll(int mpio_coll_chunk_multi_ratio_c
 
     /* Sanity checks */
     HDassert(head && *head);
-    HDassert(!((*head)->ctx.dxpl_id == H5P_DEFAULT || 
+    HDassert(!((*head)->ctx.dxpl_id == H5P_DEFAULT ||
             (*head)->ctx.dxpl_id == H5P_DATASET_XFER_DEFAULT));
 
     H5CX_TEST_SET_PROP(H5D_XFER_COLL_CHUNK_MULTI_RATIO_COLL_NAME, mpio_coll_chunk_multi_ratio_coll)
@@ -3426,7 +3426,7 @@ H5CX_test_set_mpio_coll_chunk_multi_ratio_ind(int mpio_coll_chunk_multi_ratio_in
 
     /* Sanity checks */
     HDassert(head && *head);
-    HDassert(!((*head)->ctx.dxpl_id == H5P_DEFAULT || 
+    HDassert(!((*head)->ctx.dxpl_id == H5P_DEFAULT ||
             (*head)->ctx.dxpl_id == H5P_DATASET_XFER_DEFAULT));
 
     H5CX_TEST_SET_PROP(H5D_XFER_COLL_CHUNK_MULTI_RATIO_IND_NAME, mpio_coll_chunk_multi_ratio_ind)
@@ -3460,7 +3460,7 @@ H5CX_test_set_mpio_coll_rank0_bcast(hbool_t mpio_coll_rank0_bcast)
 
     /* Sanity checks */
     HDassert(head && *head);
-    HDassert(!((*head)->ctx.dxpl_id == H5P_DEFAULT || 
+    HDassert(!((*head)->ctx.dxpl_id == H5P_DEFAULT ||
             (*head)->ctx.dxpl_id == H5P_DATASET_XFER_DEFAULT));
 
     H5CX_TEST_SET_PROP(H5D_XFER_COLL_RANK0_BCAST_NAME, mpio_coll_rank0_bcast)
diff --git a/src/H5Cdbg.c b/src/H5Cdbg.c
index cb1d0e2..d5599f2 100644
--- a/src/H5Cdbg.c
+++ b/src/H5Cdbg.c
@@ -185,7 +185,7 @@ done:
 /*-------------------------------------------------------------------------
  * Function:    H5C_dump_cache_LRU
  *
- * Purpose:     Print a summary of the contents of the metadata cache 
+ * Purpose:     Print a summary of the contents of the metadata cache
  *              LRU for debugging purposes.
  *
  * Return:      Non-negative on success/Negative on failure
@@ -209,9 +209,9 @@ H5C_dump_cache_LRU(H5C_t *cache_ptr, const char *cache_name)
     HDassert(cache_name != NULL );
 
     HDfprintf(stdout, "\n\nDump of metadata cache LRU \"%s\"\n", cache_name);
-    HDfprintf(stdout, "LRU len = %d, LRU size = %d\n", 
+    HDfprintf(stdout, "LRU len = %d, LRU size = %d\n",
               cache_ptr->LRU_list_len, (int)(cache_ptr->LRU_list_size));
-    HDfprintf(stdout, "index_size = %d, max_cache_size = %d, delta = %d\n\n", 
+    HDfprintf(stdout, "index_size = %d, max_cache_size = %d, delta = %d\n\n",
               (int)(cache_ptr->index_size), (int)(cache_ptr->max_cache_size),
               (int)(cache_ptr->max_cache_size) - (int)(cache_ptr->index_size));
 
@@ -238,12 +238,12 @@ H5C_dump_cache_LRU(H5C_t *cache_ptr, const char *cache_name)
         if(NULL == entry_ptr->tag_info)
             HDfprintf(stdout, "    %16s ", "N/A");
         else
-            HDfprintf(stdout, "  0x%16llx ", 
+            HDfprintf(stdout, "  0x%16llx ",
                       (long long)(entry_ptr->tag_info->tag));
 
         HDfprintf(stdout, "  %5lld ", (long long)(entry_ptr->size));
         HDfprintf(stdout, "    %d  ", (int)(entry_ptr->ring));
-        HDfprintf(stdout, "  %2d %-32s ", (int)(entry_ptr->type->id), 
+        HDfprintf(stdout, "  %2d %-32s ", (int)(entry_ptr->type->id),
                   (entry_ptr->type->name));
         HDfprintf(stdout, " %d", (int)(entry_ptr->is_dirty));
         HDfprintf(stdout, "\n");
@@ -262,8 +262,8 @@ H5C_dump_cache_LRU(H5C_t *cache_ptr, const char *cache_name)
 /*-------------------------------------------------------------------------
  * Function:    H5C_dump_cache_skip_list
  *
- * Purpose:     Debugging routine that prints a summary of the contents of 
- *		the skip list used by the metadata cache metadata cache to 
+ * Purpose:     Debugging routine that prints a summary of the contents of
+ *		the skip list used by the metadata cache metadata cache to
  *		maintain an address sorted list of dirty entries.
  *
  * Return:      Non-negative on success/Negative on failure
@@ -343,9 +343,9 @@ H5C_dump_cache_skip_list(H5C_t * cache_ptr, char * calling_fcn)
 /*-------------------------------------------------------------------------
  * Function:    H5C_dump_coll_write_list
  *
- * Purpose:     Debugging routine that prints a summary of the contents of 
- *		the collective write skip list used by the metadata cache 
- *              in the parallel case to maintain a list of entries to write 
+ * Purpose:     Debugging routine that prints a summary of the contents of
+ *		the collective write skip list used by the metadata cache
+ *              in the parallel case to maintain a list of entries to write
  *              collectively at a sync point.
  *
  * Return:      Non-negative on success/Negative on failure
@@ -381,7 +381,7 @@ H5C_dump_coll_write_list(H5C_t * cache_ptr, char * calling_fcn)
 
     list_len = (int)H5SL_count(cache_ptr->coll_write_list);
 
-    HDfprintf(stdout, "\n\nDumping MDC coll write list from %d:%s.\n", 
+    HDfprintf(stdout, "\n\nDumping MDC coll write list from %d:%s.\n",
               aux_ptr->mpi_rank, calling_fcn);
     HDfprintf(stdout, "	slist len = %u.\n", cache_ptr->slist_len);
 
@@ -773,7 +773,7 @@ H5C_stats(H5C_t * cache_ptr,
             (((double)(cache_ptr->total_dirty_pf_entries_skipped_in_msic)) /
             ((double)(cache_ptr->calls_to_msic)));
 
-    HDfprintf(stdout, 
+    HDfprintf(stdout,
               "%s  MSIC: Average/max dirty pf entries skipped  = %lf / %ld\n",
               cache_ptr->prefix,
               average_dirty_pf_entries_skipped_per_call_to_msic,
@@ -798,9 +798,9 @@ H5C_stats(H5C_t * cache_ptr,
               (long long)(cache_ptr->total_entries_scanned_in_msic -
                             cache_ptr->entries_scanned_to_make_space));
 
-    HDfprintf(stdout, 
+    HDfprintf(stdout,
               "%s  slist/LRU/index scan restarts   = %lld / %lld / %lld.\n",
-              cache_ptr->prefix, 
+              cache_ptr->prefix,
               (long long)(cache_ptr->slist_scan_restarts),
               (long long)(cache_ptr->LRU_scan_restarts),
               (long long)(cache_ptr->index_scan_restarts));
@@ -827,7 +827,7 @@ H5C_stats(H5C_t * cache_ptr,
               (long long)(cache_ptr->evictions[H5AC_PREFETCHED_ENTRY_ID]));
 
     if(cache_ptr->prefetches > 0)
-        prefetch_use_rate = 
+        prefetch_use_rate =
                    (double)100.0f * ((double)(cache_ptr->prefetch_hits)) /
                    ((double)(cache_ptr->prefetches));
     else
@@ -886,7 +886,7 @@ H5C_stats(H5C_t * cache_ptr,
                       (int)(cache_ptr->max_read_protects[i]));
 
             HDfprintf(stdout,
-                      "%s    clears / flushes               = %ld / %ld\n", 
+                      "%s    clears / flushes               = %ld / %ld\n",
                       cache_ptr->prefix,
                       (long)(cache_ptr->clears[i]),
                       (long)(cache_ptr->flushes[i]));
@@ -1158,21 +1158,21 @@ H5C__dump_entry(H5C_t *cache_ptr, const H5C_cache_entry_t *entry_ptr,
 /*-------------------------------------------------------------------------
  * Function:    H5C_flush_dependency_exists()
  *
- * Purpose:	Test to see if a flush dependency relationship exists 
- *          between the supplied parent and child.  Both parties 
+ * Purpose:	Test to see if a flush dependency relationship exists
+ *          between the supplied parent and child.  Both parties
  *          are indicated by addresses so as to avoid the necessity
- *          of protect / unprotect calls prior to this call. 
+ *          of protect / unprotect calls prior to this call.
  *
- *          If either the parent or the child is not in the metadata 
+ *          If either the parent or the child is not in the metadata
  *          cache, the function sets *fd_exists_ptr to FALSE.
  *
- *          If both are in the cache, the childs list of parents is 
+ *          If both are in the cache, the childs list of parents is
  *          searched for the proposed parent.  If the proposed parent
  *          is found in the childs parent list, the function sets
- *          *fd_exists_ptr to TRUE.  In all other non-error cases, 
+ *          *fd_exists_ptr to TRUE.  In all other non-error cases,
  *          the function sets *fd_exists_ptr FALSE.
  *
- * Return:      SUCCEED on success/FAIL on failure.  Note that 
+ * Return:      SUCCEED on success/FAIL on failure.  Note that
  *              *fd_exists_ptr is undefined on failure.
  *
  * Programmer:  John Mainzer
@@ -1355,30 +1355,30 @@ done:
  *
  * Function:    H5C_get_entry_ptr_from_addr()
  *
- * Purpose:     Debugging function that attempts to look up an entry in the 
- *              cache by its file address, and if found, returns a pointer 
- *              to the entry in *entry_ptr_ptr.  If the entry is not in the 
+ * Purpose:     Debugging function that attempts to look up an entry in the
+ *              cache by its file address, and if found, returns a pointer
+ *              to the entry in *entry_ptr_ptr.  If the entry is not in the
  *              cache, *entry_ptr_ptr is set to NULL.
  *
- *              WARNING: This call should be used only in debugging  
- *                       routines, and it should be avoided when 
+ *              WARNING: This call should be used only in debugging
+ *                       routines, and it should be avoided when
  *                       possible.
  *
- *                       Further, if we ever multi-thread the cache, 
- *                       this routine will have to be either discarded 
+ *                       Further, if we ever multi-thread the cache,
+ *                       this routine will have to be either discarded
  *                       or heavily re-worked.
  *
- *                       Finally, keep in mind that the entry whose 
- *                       pointer is obtained in this fashion may not 
- *                       be in a stable state.  
+ *                       Finally, keep in mind that the entry whose
+ *                       pointer is obtained in this fashion may not
+ *                       be in a stable state.
  *
  *              Note that this function is only defined if NDEBUG
  *              is not defined.
  *
- *              As heavy use of this function is almost certainly a 
- *              bad idea, the metadata cache tracks the number of 
- *              successful calls to this function, and (if 
- *              H5C_DO_SANITY_CHECKS is defined) displays any 
+ *              As heavy use of this function is almost certainly a
+ *              bad idea, the metadata cache tracks the number of
+ *              successful calls to this function, and (if
+ *              H5C_DO_SANITY_CHECKS is defined) displays any
  *              non-zero count on cache shutdown.
  *
  * Return:      FAIL if error is detected, SUCCEED otherwise.
@@ -1425,7 +1425,7 @@ done:
 /*-------------------------------------------------------------------------
  * Function:    H5C_get_serialization_in_progress
  *
- * Purpose:     Return the current value of 
+ * Purpose:     Return the current value of
  *              cache_ptr->serialization_in_progress.
  *
  * Return:      Current value of cache_ptr->serialization_in_progress.
@@ -1454,7 +1454,7 @@ H5C_get_serialization_in_progress(const H5C_t *cache_ptr)
  *
  * Function:    H5C_cache_is_clean()
  *
- * Purpose:     Debugging function that verifies that all rings in the 
+ * Purpose:     Debugging function that verifies that all rings in the
  *		metadata cache are clean from the outermost ring, inwards
  *		to the inner ring specified.
  *
@@ -1499,16 +1499,16 @@ done:
  *
  * Function:    H5C_verify_entry_type()
  *
- * Purpose:     Debugging function that attempts to look up an entry in the 
+ * Purpose:     Debugging function that attempts to look up an entry in the
  *		cache by its file address, and if found, test to see if its
  *		type field contains the expted value.
  *
  *		If the specified entry is in cache, *in_cache_ptr is set
- *		to TRUE, and *type_ok_ptr is set to TRUE or FALSE depending 
- *		on whether the entries type field matches the expected_type 
+ *		to TRUE, and *type_ok_ptr is set to TRUE or FALSE depending
+ *		on whether the entries type field matches the expected_type
  *		parameter.
  *
- *		If the target entry is not in cache, *in_cache_ptr is 
+ *		If the target entry is not in cache, *in_cache_ptr is
  *		set to FALSE, and *type_ok_ptr is undefined.
  *
  *		Note that this function is only defined if NDEBUG
diff --git a/src/H5Cepoch.c b/src/H5Cepoch.c
index 8bcab9f..6451019 100644
--- a/src/H5Cepoch.c
+++ b/src/H5Cepoch.c
@@ -58,7 +58,7 @@ static herr_t H5C__epoch_marker_get_initial_load_size(void *udata_ptr,
     size_t *image_len_ptr);
 static herr_t H5C__epoch_marker_get_final_load_size(const void *image_ptr,
     size_t image_len_ptr, void *udata_ptr, size_t *actual_len);
-static htri_t H5C__epoch_marker_verify_chksum(const void *image_ptr, 
+static htri_t H5C__epoch_marker_verify_chksum(const void *image_ptr,
     size_t len, void *udata_ptr);
 static void * H5C__epoch_marker_deserialize(const void * image_ptr,
     size_t len, void * udata, hbool_t * dirty_ptr);
@@ -71,7 +71,7 @@ static herr_t H5C__epoch_marker_serialize(const H5F_t *f,
     void * image_ptr, size_t len, void * thing);
 static herr_t H5C__epoch_marker_notify(H5C_notify_action_t action, void *thing);
 static herr_t H5C__epoch_marker_free_icr(void * thing);
-static herr_t H5C__epoch_marker_fsf_size(const void H5_ATTR_UNUSED * thing, 
+static herr_t H5C__epoch_marker_fsf_size(const void H5_ATTR_UNUSED * thing,
     hsize_t H5_ATTR_UNUSED * fsf_size_ptr);
 
 
@@ -143,8 +143,8 @@ H5C__epoch_marker_get_final_load_size(const void H5_ATTR_UNUSED *image_ptr,
 } /* end H5C__epoch_marker_final_get_load_size() */
 
 
-static htri_t 
-H5C__epoch_marker_verify_chksum(const void H5_ATTR_UNUSED *image_ptr, size_t H5_ATTR_UNUSED len, 
+static htri_t
+H5C__epoch_marker_verify_chksum(const void H5_ATTR_UNUSED *image_ptr, size_t H5_ATTR_UNUSED len,
     void H5_ATTR_UNUSED *udata_ptr)
 {
     FUNC_ENTER_STATIC_NOERR /* Yes, even though this pushes an error on the stack */
@@ -228,7 +228,7 @@ H5C__epoch_marker_free_icr(void H5_ATTR_UNUSED * thing)
 } /* end H5C__epoch_marker_free_icr() */
 
 
-static herr_t 
+static herr_t
 H5C__epoch_marker_fsf_size(const void H5_ATTR_UNUSED * thing, hsize_t H5_ATTR_UNUSED *fsf_size_ptr)
 {
     FUNC_ENTER_STATIC_NOERR /* Yes, even though this pushes an error on the stack */
diff --git a/src/H5Cimage.c b/src/H5Cimage.c
index db44c7a..ee286d9 100644
--- a/src/H5Cimage.c
+++ b/src/H5Cimage.c
@@ -102,11 +102,11 @@ static herr_t H5C__decode_cache_image_header(const H5F_t *f,
 static herr_t H5C__decode_cache_image_entry(const H5F_t *f,
     const H5C_t *cache_ptr, const uint8_t **buf, unsigned entry_num);
 #endif /* NDEBUG */ /* only used in assertions */
-static herr_t H5C__destroy_pf_entry_child_flush_deps(H5C_t *cache_ptr, 
+static herr_t H5C__destroy_pf_entry_child_flush_deps(H5C_t *cache_ptr,
     H5C_cache_entry_t *pf_entry_ptr, H5C_cache_entry_t **fd_children);
 static herr_t H5C__encode_cache_image_header(const H5F_t *f,
     const H5C_t *cache_ptr, uint8_t **buf);
-static herr_t H5C__encode_cache_image_entry(H5F_t *f, H5C_t *cache_ptr, 
+static herr_t H5C__encode_cache_image_entry(H5F_t *f, H5C_t *cache_ptr,
     uint8_t **buf, unsigned entry_num);
 static herr_t H5C__prep_for_file_close__compute_fd_heights(const H5C_t *cache_ptr);
 static void H5C__prep_for_file_close__compute_fd_heights_real(
@@ -146,8 +146,8 @@ H5FL_DEFINE(H5C_cache_entry_t);
  *
  * Function:    H5C_cache_image_pending()
  *
- * Purpose:     Tests to see if the load of a metadata cache image 
- *              load is pending (i.e. will be executed on the next 
+ * Purpose:     Tests to see if the load of a metadata cache image
+ *              load is pending (i.e. will be executed on the next
  *              protect or insert)
  *
  *              Returns TRUE if a cache image load is pending, and FALSE
@@ -179,16 +179,16 @@ H5C_cache_image_pending(const H5C_t *cache_ptr)
 /*-------------------------------------------------------------------------
  * Function:    H5C_cache_image_status()
  *
- * Purpose:     Examine the metadata cache associated with the supplied 
- *              instance of H5F_t to determine whether the load of a 
- *              cache image has either been queued or executed, and if 
+ * Purpose:     Examine the metadata cache associated with the supplied
+ *              instance of H5F_t to determine whether the load of a
+ *              cache image has either been queued or executed, and if
  *              construction of a cache image has been requested.
  *
  *              This done, it set *load_ci_ptr to TRUE if a cache image
  *              has either been loaded or a load has been requested, and
  *              to FALSE otherwise.
  *
- *              Similarly, set *write_ci_ptr to TRUE if construction of 
+ *              Similarly, set *write_ci_ptr to TRUE if construction of
  *              a cache image has been requested, and to FALSE otherwise.
  *
  * Return:      SUCCEED on success, and FAIL on failure.
@@ -213,7 +213,7 @@ H5C_cache_image_status(H5F_t * f, hbool_t *load_ci_ptr, hbool_t *write_ci_ptr)
     HDassert(cache_ptr->magic == H5C__H5C_T_MAGIC);
     HDassert(load_ci_ptr);
     HDassert(write_ci_ptr);
- 
+
     *load_ci_ptr = cache_ptr->load_image || cache_ptr->image_loaded;
     *write_ci_ptr = cache_ptr->image_ctl.generate_image;
 
@@ -224,7 +224,7 @@ H5C_cache_image_status(H5F_t * f, hbool_t *load_ci_ptr, hbool_t *write_ci_ptr)
 /*-------------------------------------------------------------------------
  * Function:    H5C__construct_cache_image_buffer()
  *
- * Purpose:     Allocate a buffer of size cache_ptr->image_len, and 
+ * Purpose:     Allocate a buffer of size cache_ptr->image_len, and
  *		load it with an image of the metadata cache image block.
  *
  *		Note that by the time this function is called, the cache
@@ -330,7 +330,7 @@ H5C__construct_cache_image_buffer(H5F_t * f, H5C_t *cache_ptr)
 	    HDassert((cache_ptr->image_entries)[u].type_id == (fake_cache_ptr->image_entries)[u].type_id);
 	    HDassert((cache_ptr->image_entries)[u].lru_rank == (fake_cache_ptr->image_entries)[u].lru_rank);
 	    HDassert((cache_ptr->image_entries)[u].is_dirty == (fake_cache_ptr->image_entries)[u].is_dirty);
-	    /* don't check image_fd_height as it is not stored in 
+	    /* don't check image_fd_height as it is not stored in
              * the metadata cache image block.
              */
 	    HDassert((cache_ptr->image_entries)[u].fd_child_count == (fake_cache_ptr->image_entries)[u].fd_child_count);
@@ -346,7 +346,7 @@ H5C__construct_cache_image_buffer(H5F_t * f, H5C_t *cache_ptr)
 		(fake_cache_ptr->image_entries)[u].fd_parent_addrs = (haddr_t *)H5MM_xfree((fake_cache_ptr->image_entries)[u].fd_parent_addrs);
 		(fake_cache_ptr->image_entries)[u].fd_parent_count = 0;
 	    } /* end if */
-            else 
+            else
 		HDassert((fake_cache_ptr->image_entries)[u].fd_parent_count == 0);
 
 	    HDassert((cache_ptr->image_entries)[u].image_ptr);
@@ -431,28 +431,28 @@ done:
  * Function:    H5C__deserialize_prefetched_entry()
  *
  * Purpose:     Deserialize the supplied prefetched entry entry, and return
- *		a pointer to the deserialized entry in *entry_ptr_ptr. 
+ *		a pointer to the deserialized entry in *entry_ptr_ptr.
  *		If successful, remove the prefetched entry from the cache,
  *		and free it.  Insert the deserialized entry into the cache.
  *
- *		Note that the on disk image of the entry is not freed -- 
+ *		Note that the on disk image of the entry is not freed --
  *		a pointer to it is stored in the deserialized entries'
  *		image_ptr field, and its image_up_to_date field is set to
  *		TRUE unless the entry is dirtied by the deserialize call.
  *
  *		If the prefetched entry is a flush dependency child,
- *		destroy that flush dependency prior to calling the 
+ *		destroy that flush dependency prior to calling the
  *		deserialize callback.  If appropriate, the flush dependency
  *		relationship will be recreated by the cache client.
  *
  *		If the prefetched entry is a flush dependency parent,
- *		destroy the flush dependency relationship with all its 
+ *		destroy the flush dependency relationship with all its
  *		children.  As all these children must be prefetched entries,
- *		recreate these flush dependency relationships with 
+ *		recreate these flush dependency relationships with
  *		deserialized entry after it is inserted in the cache.
  *
- *		Since deserializing a prefetched entry is semantically 
- *		equivalent to a load, issue an entry loaded nofification 
+ *		Since deserializing a prefetched entry is semantically
+ *		equivalent to a load, issue an entry loaded nofification
  *		if the notify callback is defined.
  *
  * Return:      SUCCEED on success, and FAIL on failure.
@@ -468,22 +468,22 @@ H5C__deserialize_prefetched_entry(H5F_t *f, H5C_t *cache_ptr,
     H5C_cache_entry_t **entry_ptr_ptr, const H5C_class_t *type,
     haddr_t addr, void *udata)
 {
-    hbool_t		dirty = FALSE;  /* Flag indicating whether thing was 
-                                         * dirtied during deserialize 
+    hbool_t		dirty = FALSE;  /* Flag indicating whether thing was
+                                         * dirtied during deserialize
                                          */
     size_t              len;            /* Size of image in file */
     void *		thing = NULL;   /* Pointer to thing loaded */
     H5C_cache_entry_t * pf_entry_ptr;   /* pointer to the prefetched entry   */
                                         /* supplied in *entry_ptr_ptr.       */
-    H5C_cache_entry_t *	ds_entry_ptr;   /* Alias for thing loaded, as cache 
-                                         * entry 
+    H5C_cache_entry_t *	ds_entry_ptr;   /* Alias for thing loaded, as cache
+                                         * entry
                                          */
     H5C_cache_entry_t** fd_children = NULL; /* Pointer to a dynamically      */
                                         /* allocated array of pointers to    */
                                         /* the flush dependency children of  */
                                         /* the prefetched entry, or NULL if  */
                                         /* that array does not exist.        */
-    unsigned            flush_flags = (H5C__FLUSH_INVALIDATE_FLAG | 
+    unsigned            flush_flags = (H5C__FLUSH_INVALIDATE_FLAG |
 				       H5C__FLUSH_CLEAR_ONLY_FLAG);
     int			i;
     herr_t      	ret_value = SUCCEED;      /* Return value */
@@ -513,8 +513,8 @@ H5C__deserialize_prefetched_entry(H5F_t *f, H5C_t *cache_ptr,
 
     /* verify absence of prohibited or unsupported type flag combinations */
     HDassert(!(type->flags & H5C__CLASS_SKIP_READS));
- 
-    /* Can't see how skip reads could be usefully combined with 
+
+    /* Can't see how skip reads could be usefully combined with
      * either the speculative read flag.  Hence disallow.
      */
     HDassert(!((type->flags & H5C__CLASS_SKIP_READS) &&
@@ -535,7 +535,7 @@ H5C__deserialize_prefetched_entry(H5F_t *f, H5C_t *cache_ptr,
         HDassert(pf_entry_ptr->flush_dep_parent[i]->flush_dep_nchildren > 0);
         HDassert(pf_entry_ptr->fd_parent_addrs);
         HDassert(pf_entry_ptr->flush_dep_parent[i]->addr == pf_entry_ptr->fd_parent_addrs[i]);
-        
+
         if(H5C_destroy_flush_dependency(pf_entry_ptr->flush_dep_parent[i], pf_entry_ptr) < 0)
             HGOTO_ERROR(H5E_CACHE, H5E_CANTUNDEPEND, FAIL, "can't destroy pf entry parent flush dependency")
 
@@ -543,11 +543,11 @@ H5C__deserialize_prefetched_entry(H5F_t *f, H5C_t *cache_ptr,
     } /* end for */
     HDassert(pf_entry_ptr->flush_dep_nparents == 0);
 
-    /* If *pf_entry_ptr is a flush dependency parent, destroy its flush 
-     * dependency relationships with all its children (which must be 
+    /* If *pf_entry_ptr is a flush dependency parent, destroy its flush
+     * dependency relationships with all its children (which must be
      * prefetched entries as well).
      *
-     * These flush dependency relationships will have to be restored 
+     * These flush dependency relationships will have to be restored
      * after the deserialized entry is inserted into the cache in order
      * to transfer these relationships to the new entry.  Hence save the
      * pointers to the flush dependency children of *pf_enty_ptr for later
@@ -561,16 +561,16 @@ H5C__deserialize_prefetched_entry(H5F_t *f, H5C_t *cache_ptr,
             HGOTO_ERROR(H5E_CACHE, H5E_CANTUNDEPEND, FAIL, "can't destroy pf entry child flush dependency(s).")
     } /* end if */
 
-    /* Since the size of the on disk image is known exactly, there is 
-     * no need for either a call to the get_initial_load_size() callback, 
+    /* Since the size of the on disk image is known exactly, there is
+     * no need for either a call to the get_initial_load_size() callback,
      * or retries if the H5C__CLASS_SPECULATIVE_LOAD_FLAG flag is set.
      * Similarly, there is no need to clamp possible reads beyond
      * EOF.
      */
     len = pf_entry_ptr->size;
 
-    /* Deserialize the prefetched on-disk image of the entry into the 
-     * native memory form 
+    /* Deserialize the prefetched on-disk image of the entry into the
+     * native memory form
      */
     if(NULL == (thing = type->deserialize(pf_entry_ptr->image_ptr, len, udata, &dirty)))
         HGOTO_ERROR(H5E_CACHE, H5E_CANTLOAD, FAIL, "Can't deserialize image")
@@ -587,14 +587,14 @@ H5C__deserialize_prefetched_entry(H5F_t *f, H5C_t *cache_ptr,
      *
      * 	HDassert( ( dirty == FALSE ) || ( type->id == 5 || type->id == 6 ) );
      *
-     * note that type ids 5 & 6 are associated with object headers in the 
+     * note that type ids 5 & 6 are associated with object headers in the
      * metadata cache.
      *
      * When we get to using H5C for other purposes, we may wish to
      * tighten up the assert so that the loophole only applies to the
      * metadata cache.
      *
-     * Note that at present, dirty can't be set to true with prefetched 
+     * Note that at present, dirty can't be set to true with prefetched
      * entries.  However this may change, so include this functionality
      * against that posibility.
      *
@@ -682,8 +682,8 @@ H5C__deserialize_prefetched_entry(H5F_t *f, H5C_t *cache_ptr,
     /* We have successfully deserialized the prefetched entry.
      *
      * Before we return a pointer to the deserialized entry, we must remove
-     * the prefetched entry from the cache, discard it, and replace it with 
-     * the deserialized entry.  Note that we do not free the prefetched 
+     * the prefetched entry from the cache, discard it, and replace it with
+     * the deserialized entry.  Note that we do not free the prefetched
      * entries image, as that has been transferred to the deserialized
      * entry.
      *
@@ -695,11 +695,11 @@ H5C__deserialize_prefetched_entry(H5F_t *f, H5C_t *cache_ptr,
      *  1) Set pf_entry_ptr->image_ptr to NULL.  Since we have already
      *     transferred the buffer containing the image to *ds_entry_ptr,
      *	   this is not a memory leak.
-     * 
+     *
      *  2) Call H5C__flush_single_entry() with the H5C__FLUSH_INVALIDATE_FLAG
      *     and H5C__FLUSH_CLEAR_ONLY_FLAG flags set.
      */
-    pf_entry_ptr->image_ptr = NULL; 
+    pf_entry_ptr->image_ptr = NULL;
     if(pf_entry_ptr->is_dirty) {
         HDassert(pf_entry_ptr->in_slist);
         flush_flags |= H5C__DEL_FROM_SLIST_ON_DESTROY_FLAG;
@@ -723,7 +723,7 @@ H5C__deserialize_prefetched_entry(H5F_t *f, H5C_t *cache_ptr,
 
     H5C__UPDATE_RP_FOR_INSERTION(cache_ptr, ds_entry_ptr, FAIL)
 
-    /* Deserializing a prefetched entry is the conceptual equivalent of 
+    /* Deserializing a prefetched entry is the conceptual equivalent of
      * loading it from file.  If the deserialized entry has a notify callback,
      * send an "after load" notice now that the deserialized entry is fully
      * integrated into the cache.
@@ -732,9 +732,9 @@ H5C__deserialize_prefetched_entry(H5F_t *f, H5C_t *cache_ptr,
             (ds_entry_ptr->type->notify)(H5C_NOTIFY_ACTION_AFTER_LOAD, ds_entry_ptr) < 0)
         HGOTO_ERROR(H5E_CACHE, H5E_CANTNOTIFY, FAIL, "can't notify client about entry loaded into cache")
 
-    /* Restore flush dependencies with the flush dependency children of 
-     * of the prefetched entry.  Note that we must protect *ds_entry_ptr 
-     * before the call to avoid triggering sanity check failures, and 
+    /* Restore flush dependencies with the flush dependency children of
+     * of the prefetched entry.  Note that we must protect *ds_entry_ptr
+     * before the call to avoid triggering sanity check failures, and
      * then unprotect it afterwards.
      */
     i = 0;
@@ -798,8 +798,8 @@ done:
 /*-------------------------------------------------------------------------
  * Function:    H5C__free_image_entries_array
  *
- * Purpose:     If the image entries array exists, free the image 
- *		associated with each entry, and then free the image 
+ * Purpose:     If the image entries array exists, free the image
+ *		associated with each entry, and then free the image
  *		entries array proper.
  *
  *		Note that by the time this function is called, the cache
@@ -834,7 +834,7 @@ H5C__free_image_entries_array(H5C_t * cache_ptr)
             /* Get pointer to image entry */
  	    ie_ptr = &((cache_ptr->image_entries)[u]);
 
-            /* Sanity checks */ 
+            /* Sanity checks */
 	    HDassert(ie_ptr);
             HDassert(ie_ptr->magic == H5C_IMAGE_ENTRY_T_MAGIC);
 	    HDassert(ie_ptr->image_ptr);
@@ -866,14 +866,14 @@ H5C__free_image_entries_array(H5C_t * cache_ptr)
 /*-------------------------------------------------------------------------
  * Function:    H5C_force_cache_image_load()
  *
- * Purpose:     On rare occasions, it is necessary to run 
+ * Purpose:     On rare occasions, it is necessary to run
  *		H5MF_tidy_self_referential_fsm_hack() prior to the first
- *              metadata cache access.  This is a problem as if there is a 
- *              cache image at the end of the file, that routine will 
+ *              metadata cache access.  This is a problem as if there is a
+ *              cache image at the end of the file, that routine will
  *              discard it.
  *
  *              We solve this issue by calling this function, which will
- *		load the cache image and then call 
+ *		load the cache image and then call
  *              H5MF_tidy_self_referential_fsm_hack() to discard it.
  *
  * Return:      SUCCEED on success, and FAIL on failure.
@@ -1053,12 +1053,12 @@ H5C__read_cache_image(H5F_t *f, H5C_t *cache_ptr)
 
     if ( ( NULL == aux_ptr ) || ( aux_ptr->mpi_rank == 0 ) ) {
 
-	HDassert((NULL == aux_ptr) || 
+	HDassert((NULL == aux_ptr) ||
                  (aux_ptr->magic == H5AC__H5AC_AUX_T_MAGIC));
 #endif /* H5_HAVE_PARALLEL */
 
 	/* Read the buffer (if serial access, or rank 0 of parallel access) */
-        if(H5F_block_read(f, H5FD_MEM_SUPER, cache_ptr->image_addr, 
+        if(H5F_block_read(f, H5FD_MEM_SUPER, cache_ptr->image_addr,
                 cache_ptr->image_len, cache_ptr->image_buffer) < 0)
             HGOTO_ERROR(H5E_CACHE, H5E_READERROR, FAIL, "Can't read metadata cache image block")
 
@@ -1068,9 +1068,9 @@ H5C__read_cache_image(H5F_t *f, H5C_t *cache_ptr)
         if ( aux_ptr ) {
 
 	        /* Broadcast cache image */
-            if ( MPI_SUCCESS != 
-                 (mpi_result = MPI_Bcast(cache_ptr->image_buffer, 
-                                         (int)cache_ptr->image_len, MPI_BYTE, 
+            if ( MPI_SUCCESS !=
+                 (mpi_result = MPI_Bcast(cache_ptr->image_buffer,
+                                         (int)cache_ptr->image_len, MPI_BYTE,
                                          0, aux_ptr->mpi_comm)) )
 
                 HMPI_GOTO_ERROR(FAIL, "MPI_Bcast failed", mpi_result)
@@ -1080,9 +1080,9 @@ H5C__read_cache_image(H5F_t *f, H5C_t *cache_ptr)
     else if ( aux_ptr ) {
 
         /* Retrieve the contents of the metadata cache image from process 0 */
-        if ( MPI_SUCCESS != 
-             (mpi_result = MPI_Bcast(cache_ptr->image_buffer, 
-                                     (int)cache_ptr->image_len, MPI_BYTE, 
+        if ( MPI_SUCCESS !=
+             (mpi_result = MPI_Bcast(cache_ptr->image_buffer,
+                                     (int)cache_ptr->image_len, MPI_BYTE,
                                      0, aux_ptr->mpi_comm)) )
 
             HMPI_GOTO_ERROR(FAIL, "can't receive cache image MPI_Bcast", \
@@ -1128,14 +1128,14 @@ H5C__load_cache_image(H5F_t *f)
     HDassert(cache_ptr);
     HDassert(cache_ptr->magic == H5C__H5C_T_MAGIC);
 
-    /* If the image address is defined, load the image, decode it, 
-     * and insert its contents into the metadata cache. 
+    /* If the image address is defined, load the image, decode it,
+     * and insert its contents into the metadata cache.
      *
-     * Note that under normal operating conditions, it is an error if the 
+     * Note that under normal operating conditions, it is an error if the
      * image address is HADDR_UNDEF.  However, to facilitate testing,
      * we allow this special value of the image address which means that
-     * no image exists, and that the load operation should be skipped 
-     * silently.  
+     * no image exists, and that the load operation should be skipped
+     * silently.
      */
     if(H5F_addr_defined(cache_ptr->image_addr)) {
         /* Sanity checks */
@@ -1184,25 +1184,25 @@ done:
 /*-------------------------------------------------------------------------
  * Function:    H5C_load_cache_image_on_next_protect()
  *
- * Purpose:     Note the fact that a metadata cache image superblock 
+ * Purpose:     Note the fact that a metadata cache image superblock
  *		extension message exists, along with the base address
  *		and length of the metadata cache image block.
  *
- *		Once this notification is received the metadata cache 
- *		image block must be read, decoded, and loaded into the 
+ *		Once this notification is received the metadata cache
+ *		image block must be read, decoded, and loaded into the
  *		cache on the next call to H5C_protect().
  *
- *		Further, if the file is opened R/W, the metadata cache 
- *		image superblock extension message must be deleted from 
+ *		Further, if the file is opened R/W, the metadata cache
+ *		image superblock extension message must be deleted from
  *		the superblock extension and the image block freed
  *
  *		Contrawise, if the file is openened R/O, the metadata
  *		cache image superblock extension message and image block
  *		must be left as is.  Further, any dirty entries in the
- *		cache image block must be marked as clean to avoid 
+ *		cache image block must be marked as clean to avoid
  *		attempts to write them on file close.
  *
- * Return:      SUCCEED 
+ * Return:      SUCCEED
  *
  * Programmer:  John Mainzer
  *		7/6/15
@@ -1291,41 +1291,41 @@ H5C__image_entry_cmp(const void *_entry1, const void *_entry2)
 /*-------------------------------------------------------------------------
  * Function:    H5C__prep_image_for_file_close
  *
- * Purpose:     The objective of the call is to allow the metadata cache 
- *		to do any preparatory work prior to generation of a 
+ * Purpose:     The objective of the call is to allow the metadata cache
+ *		to do any preparatory work prior to generation of a
  *		cache image.
  *
- *		In particular, the cache must 
+ *		In particular, the cache must
  *
  *		1) serialize all its entries,
  *
- *		2) compute the size of the metadata cache image, 
+ *		2) compute the size of the metadata cache image,
  *
  *		3) allocate space for the metadata cache image, and
  *
  *		4) setup the metadata cache image superblock extension
- *		   message with the address and size of the metadata 
+ *		   message with the address and size of the metadata
  *		   cache image.
  *
- *		The parallel case is complicated by the fact that 
- *		while all metadata caches must contain the same set of 
- *		dirty entries, there is no such requirement for clean 
+ *		The parallel case is complicated by the fact that
+ *		while all metadata caches must contain the same set of
+ *		dirty entries, there is no such requirement for clean
  *		entries or the order that entries appear in the LRU.
  *
  *		Thus, there is no requirement that different processes
  *		will construct cache images of the same size.
  *
- *		This is not a major issue as long as all processes include 
- *		the same set of dirty entries in the cache -- as they 
- *		currently do (note that this will change when we implement 
- *		the ageout feature).  Since only the process zero cache 
- *		writes the cache image, all that is necessary is to 
- *		broadcast the process zero cache size for use in the 
- *		superblock extension messages and cache image block 
+ *		This is not a major issue as long as all processes include
+ *		the same set of dirty entries in the cache -- as they
+ *		currently do (note that this will change when we implement
+ *		the ageout feature).  Since only the process zero cache
+ *		writes the cache image, all that is necessary is to
+ *		broadcast the process zero cache size for use in the
+ *		superblock extension messages and cache image block
  *		allocations.
  *
- *		Note: At present, cache image is disabled in the 
- *		parallel case as the new collective metadata write 
+ *		Note: At present, cache image is disabled in the
+ *		parallel case as the new collective metadata write
  *		code must be modified to support cache image.
  *
  * Return:      Non-negative on success/Negative on failure
@@ -1354,8 +1354,8 @@ H5C__prep_image_for_file_close(H5F_t *f, hbool_t *image_generated)
     HDassert(cache_ptr->magic == H5C__H5C_T_MAGIC);
     HDassert(image_generated);
 
-    /* If the file is opened and closed without any access to 
-     * any group or data set, it is possible that the cache image (if 
+    /* If the file is opened and closed without any access to
+     * any group or data set, it is possible that the cache image (if
      * it exists) has not been read yet.  Do this now if required.
      */
     if(cache_ptr->load_image) {
@@ -1365,15 +1365,15 @@ H5C__prep_image_for_file_close(H5F_t *f, hbool_t *image_generated)
     } /* end if */
 
     /* Before we start to generate the cache image (if requested), verify
-     * that the superblock supports superblock extension messages, and 
+     * that the superblock supports superblock extension messages, and
      * silently cancel any request for a cache image if it does not.
      *
      * Ideally, we would do this when the cache image is requested,
-     * but the necessary information is not necessary available at that 
+     * but the necessary information is not necessary available at that
      * time -- hence this last minute check.
      *
-     * Note that under some error conditions, the superblock will be 
-     * undefined in this case as well -- if so, assume that the 
+     * Note that under some error conditions, the superblock will be
+     * undefined in this case as well -- if so, assume that the
      * superblock does not support superblock extension messages.
      * Also verify that the file's high_bound is at least release
      * 1.10.x, otherwise cancel the request for a cache image
@@ -1390,17 +1390,17 @@ H5C__prep_image_for_file_close(H5F_t *f, hbool_t *image_generated)
     /* Generate the cache image, if requested */
     if(cache_ptr->image_ctl.generate_image) {
         /* Create the cache image super block extension message.
-         * 
+         *
          * Note that the base address and length of the metadata cache
          * image are undefined at this point, and thus will have to be
          * updated later.
          *
-         * Create the super block extension message now so that space 
+         * Create the super block extension message now so that space
          * is allocated for it (if necessary) before we allocate space
          * for the cache image block.
          *
-         * To simplify testing, do this only if the 
-         * H5C_CI__GEN_MDCI_SBE_MESG bit is set in 
+         * To simplify testing, do this only if the
+         * H5C_CI__GEN_MDCI_SBE_MESG bit is set in
          * cache_ptr->image_ctl.flags.
          */
         if(cache_ptr->image_ctl.flags & H5C_CI__GEN_MDCI_SBE_MESG)
@@ -1411,20 +1411,20 @@ H5C__prep_image_for_file_close(H5F_t *f, hbool_t *image_generated)
         if(H5C__serialize_cache(f) < 0)
             HGOTO_ERROR(H5E_CACHE, H5E_SYSTEM, FAIL, "serialization of the cache failed")
 
-        /* Scan the cache and record data needed to construct the 
+        /* Scan the cache and record data needed to construct the
          * cache image.  In particular, for each entry we must record:
          *
          * 1) rank in LRU (if entry is in LRU)
          *
-         * 2) Whether the entry is dirty prior to flush of 
+         * 2) Whether the entry is dirty prior to flush of
          *    cache just prior to close.
          *
          * 3) Addresses of flush dependency parents (if any).
          *
-         * 4) Number of flush dependency children (if any).  
+         * 4) Number of flush dependency children (if any).
          *
-         * In passing, also compute the size of the metadata cache 
-         * image.  With the recent modifications of the free space 
+         * In passing, also compute the size of the metadata cache
+         * image.  With the recent modifications of the free space
          * manager code, this size should be correct.
          */
         if(H5C__prep_for_file_close__scan_entries(f, cache_ptr) < 0)
@@ -1432,7 +1432,7 @@ H5C__prep_image_for_file_close(H5F_t *f, hbool_t *image_generated)
         HDassert(HADDR_UNDEF == cache_ptr->image_addr);
 
 #ifdef H5_HAVE_PARALLEL
-        /* In the parallel case, overwrite the image_len with the 
+        /* In the parallel case, overwrite the image_len with the
          * value computed by process 0.
          */
         if(cache_ptr->aux_ptr) { /* we have multiple processes */
@@ -1453,17 +1453,17 @@ H5C__prep_image_for_file_close(H5F_t *f, hbool_t *image_generated)
             else {
                 if(MPI_SUCCESS != (mpi_result = MPI_Bcast(&p0_image_len, 1, MPI_UNSIGNED, 0, aux_ptr->mpi_comm)))
                     HMPI_GOTO_ERROR(FAIL, "MPI_Bcast failed", mpi_result)
-                
+
                 aux_ptr->p0_image_len = p0_image_len;
             } /* end else */
 
-            /* Allocate space for a cache image of size equal to that 
-             * computed by the process 0.  This may be different from 
+            /* Allocate space for a cache image of size equal to that
+             * computed by the process 0.  This may be different from
              * cache_ptr->image_data_len if mpi_rank != 0.  However, since
-             * cache image write is suppressed on all processes other than 
+             * cache image write is suppressed on all processes other than
              * process 0, this doesn't matter.
              *
-             * Note that we allocate the cache image directly from the file 
+             * Note that we allocate the cache image directly from the file
              * driver so as to avoid unsettling the free space managers.
              */
             if(HADDR_UNDEF == (cache_ptr->image_addr = H5FD_alloc(f->shared->lf, H5FD_MEM_SUPER, f,
@@ -1472,8 +1472,8 @@ H5C__prep_image_for_file_close(H5F_t *f, hbool_t *image_generated)
         } /* end if */
         else
 #endif /* H5_HAVE_PARALLEL */
-            /* Allocate the cache image block.  Note that we allocate this 
-             * this space directly from the file driver so as to avoid 
+            /* Allocate the cache image block.  Note that we allocate this
+             * this space directly from the file driver so as to avoid
              * unsettling the free space managers.
              */
             if(HADDR_UNDEF == (cache_ptr->image_addr = H5FD_alloc(f->shared->lf, H5FD_MEM_SUPER, f,
@@ -1497,25 +1497,25 @@ H5C__prep_image_for_file_close(H5F_t *f, hbool_t *image_generated)
          * image block to the next alignment boundary, and then setting
          * the image_data_len to the actual size of the cache_image.
          *
-         * On the off chance that there is some other way to get a 
+         * On the off chance that there is some other way to get a
          * a fragment on a cache image allocation, leave the following
          * assertion in the code so we will find out.
          */
         HDassert((eoa_frag_size == 0) || (f->shared->alignment != 1));
 
         /* Eventually it will be possible for the length of the cache image
-         * block on file to be greater than the size of the data it 
-         * contains.  However, for now they must be the same.  Set 
+         * block on file to be greater than the size of the data it
+         * contains.  However, for now they must be the same.  Set
          * cache_ptr->image_len accordingly.
          */
         cache_ptr->image_len = cache_ptr->image_data_len;
 
-        /* update the metadata cache image superblock extension 
-         * message with the new cache image block base address and 
+        /* update the metadata cache image superblock extension
+         * message with the new cache image block base address and
          * length.
          *
-         * to simplify testing, do this only if the 
-         * H5C_CI__GEN_MDC_IMAGE_BLK bit is set in 
+         * to simplify testing, do this only if the
+         * H5C_CI__GEN_MDC_IMAGE_BLK bit is set in
          * cache_ptr->image_ctl.flags.
          */
         if(cache_ptr->image_ctl.flags & H5C_CI__GEN_MDC_IMAGE_BLK)
@@ -1525,18 +1525,18 @@ H5C__prep_image_for_file_close(H5F_t *f, hbool_t *image_generated)
         /* At this point:
          *
          *   1) space in the file for the metadata cache image
-         *      is allocated, 
+         *      is allocated,
          *
-         *   2) the metadata cache image superblock extension 
-         *      message exists and (if so configured) contains 
+         *   2) the metadata cache image superblock extension
+         *      message exists and (if so configured) contains
          *      the correct data,
          *
-         *   3) All entries in the cache that will appear in the 
+         *   3) All entries in the cache that will appear in the
          *      cache image are serialized with up to date images.
          *
          *      Since we just updated the cache image message,
          *      the super block extension message is dirty.  However,
-         *      since the superblock and the superblock extension 
+         *      since the superblock and the superblock extension
          *      can't be included in the cache image, this is a non-
          *      issue.
          *
@@ -1544,16 +1544,16 @@ H5C__prep_image_for_file_close(H5F_t *f, hbool_t *image_generated)
          *      the cache are marked as such, and we have a count
          *      of same.
          *
-         *   5) Flush dependency heights are calculated for all 
+         *   5) Flush dependency heights are calculated for all
          *      entries that will be included in the cache image.
          *
          * If there are any entries to be included in the metadata cache
-         * image, allocate, populate, and sort the image_entries array.  
+         * image, allocate, populate, and sort the image_entries array.
          *
-         * If the metadata cache image will be empty, delete the 
-         * metadata cache image superblock extension message, set 
+         * If the metadata cache image will be empty, delete the
+         * metadata cache image superblock extension message, set
          * cache_ptr->image_ctl.generate_image to FALSE.  This will
-         * allow the file close to continue normally without the 
+         * allow the file close to continue normally without the
          * unnecessary generation of the metadata cache image.
          */
         if(cache_ptr->num_entries_in_image > 0) {
@@ -1567,9 +1567,9 @@ H5C__prep_image_for_file_close(H5F_t *f, hbool_t *image_generated)
         else { /* cancel creation of metadata cache image */
             HDassert(cache_ptr->image_entries == NULL);
 
-            /* To avoid breaking the control flow tests, only delete 
-             * the mdci superblock extension message if the 
-             * H5C_CI__GEN_MDC_IMAGE_BLK flag is set in 
+            /* To avoid breaking the control flow tests, only delete
+             * the mdci superblock extension message if the
+             * H5C_CI__GEN_MDC_IMAGE_BLK flag is set in
              * cache_ptr->image_ctl.flags.
              */
             if(cache_ptr->image_ctl.flags & H5C_CI__GEN_MDC_IMAGE_BLK)
@@ -1591,8 +1591,8 @@ done:
 /*-------------------------------------------------------------------------
  * Function:    H5C_set_cache_image_config
  *
- * Purpose:	If *config_ptr contains valid data, copy it into the 
- *		image_ctl field of *cache_ptr.  Make adjustments for 
+ * Purpose:	If *config_ptr contains valid data, copy it into the
+ *		image_ctl field of *cache_ptr.  Make adjustments for
  *		changes in configuration as required.
  *
  *              If the file is open read only, silently
@@ -1601,9 +1601,9 @@ done:
  *
  *              Note that in addition to being inapplicable in the
  *              read only case, cache image is also inapplicable if
- *              the superblock does not support superblock extension 
- *              messages.  Unfortunately, this information need not 
- *              be available at this point. Thus we check for this 
+ *              the superblock does not support superblock extension
+ *              messages.  Unfortunately, this information need not
+ *              be available at this point. Thus we check for this
  *              later, in H5C_prep_for_file_close() and cancel the
  *              cache image request if appropriate.
  *
@@ -1638,7 +1638,7 @@ H5C_set_cache_image_config(const H5F_t *f, H5C_t *cache_ptr,
         HGOTO_ERROR(H5E_ARGS, H5E_BADRANGE, FAIL, "invalid cache image configuration")
 
 #ifdef H5_HAVE_PARALLEL
-    /* The collective metadata write code is not currently compatible 
+    /* The collective metadata write code is not currently compatible
      * with cache image.  Until this is fixed, suppress cache image silently
      * if there is more than one process.
      *                                         JRM -- 11/8/16
@@ -1652,15 +1652,15 @@ H5C_set_cache_image_config(const H5F_t *f, H5C_t *cache_ptr,
     else {
 #endif /* H5_HAVE_PARALLEL */
         /* A cache image can only be generated if the file is opened read / write
-         * and the superblock supports superblock extension messages.  
+         * and the superblock supports superblock extension messages.
          *
-         * However, the superblock version is not available at this point -- 
+         * However, the superblock version is not available at this point --
          * hence we can only check the former requirement now.  Do the latter
-         * check just before we construct the image..  
+         * check just before we construct the image..
          *
          * If the file is opened read / write, apply the supplied configuration.
          *
-         * If it is not, set the image configuration to the default, which has 
+         * If it is not, set the image configuration to the default, which has
          * the effect of silently disabling the cache image if it was requested.
          */
         if(H5F_INTENT(f) & H5F_ACC_RDWR)
@@ -1683,7 +1683,7 @@ done:
 /*-------------------------------------------------------------------------
  * Function:    H5C_validate_cache_image_config()
  *
- * Purpose:	Run a sanity check on the provided instance of struct 
+ * Purpose:	Run a sanity check on the provided instance of struct
  *		H5AC_cache_image_config_t.
  *
  *		Do nothing and return SUCCEED if no errors are detected,
@@ -1715,8 +1715,8 @@ H5C_validate_cache_image_config(H5C_cache_image_ctl_t * ctl_ptr)
     if(ctl_ptr->save_resize_status != FALSE)
         HGOTO_ERROR(H5E_CACHE, H5E_BADVALUE, FAIL, "unexpected value in save_resize_status field")
 
-    /* At present, we do not support prefetched entry ageouts.  Thus 
-     * the entry_ageout field must be set to 
+    /* At present, we do not support prefetched entry ageouts.  Thus
+     * the entry_ageout field must be set to
      * H5AC__CACHE_IMAGE__ENTRY_AGEOUT__NONE.
      */
     if(ctl_ptr->entry_ageout != H5AC__CACHE_IMAGE__ENTRY_AGEOUT__NONE)
@@ -1740,7 +1740,7 @@ done:
  * Purpose:     Compute the size of the header of the metadata cache
  *		image block, and return the value.
  *
- * Return:      Size of the header section of the metadata cache image 
+ * Return:      Size of the header section of the metadata cache image
  *		block in bytes.
  *
  * Programmer:  John Mainzer
@@ -1777,7 +1777,7 @@ H5C__cache_image_block_entry_header_size(const H5F_t * f)
  * Purpose:     Compute the size of the header of the metadata cache
  *		image block, and return the value.
  *
- * Return:      Size of the header section of the metadata cache image 
+ * Return:      Size of the header section of the metadata cache image
  *		block in bytes.
  *
  * Programmer:  John Mainzer
@@ -1806,9 +1806,9 @@ H5C__cache_image_block_header_size(const H5F_t * f)
 /*-------------------------------------------------------------------------
  * Function:    H5C__decode_cache_image_header()
  *
- * Purpose:     Decode the metadata cache image buffer header from the 
+ * Purpose:     Decode the metadata cache image buffer header from the
  *		supplied buffer and load the data into the supplied instance
- *		of H5C_t.  Advances the buffer pointer to the first byte 
+ *		of H5C_t.  Advances the buffer pointer to the first byte
  *		after the header image, or unchanged on failure.
  *
  * Return:      Non-negative on success/Negative on failure
@@ -1853,7 +1853,7 @@ H5C__decode_cache_image_header(const H5F_t *f, H5C_t *cache_ptr,
 
     /* Decode flags */
     flags = *p++;
-    if(flags & H5C__MDCI_HEADER_HAVE_RESIZE_STATUS)	
+    if(flags & H5C__MDCI_HEADER_HAVE_RESIZE_STATUS)
 	have_resize_status = TRUE;
     if(have_resize_status)
 	HGOTO_ERROR(H5E_CACHE, H5E_BADVALUE, FAIL, "MDC resize status not yet supported")
@@ -1867,7 +1867,7 @@ H5C__decode_cache_image_header(const H5F_t *f, H5C_t *cache_ptr,
 
     /* Read num entries */
     UINT32DECODE(p, cache_ptr->num_entries_in_image);
-    if(cache_ptr->num_entries_in_image == 0) 
+    if(cache_ptr->num_entries_in_image == 0)
 	HGOTO_ERROR(H5E_CACHE, H5E_BADVALUE, FAIL, "Bad metadata cache entry count")
 
     /* Verify expected length of header */
@@ -1888,13 +1888,13 @@ done:
 /*-------------------------------------------------------------------------
  * Function:    H5C__decode_cache_image_entry()
  *
- * Purpose:     Decode the metadata cache image entry from the supplied 
+ * Purpose:     Decode the metadata cache image entry from the supplied
  *		buffer into the supplied instance of H5C_image_entry_t.
  *		This includes allocating a buffer for the entry image,
- *		loading it, and seting ie_ptr->image_ptr to point to 
+ *		loading it, and seting ie_ptr->image_ptr to point to
  *		the buffer.
  *
- *		Advances the buffer pointer to the first byte 
+ *		Advances the buffer pointer to the first byte
  *		after the entry, or unchanged on failure.
  *
  * Return:      Non-negative on success/Negative on failure
@@ -1998,8 +1998,8 @@ H5C__decode_cache_image_entry(const H5F_t *f, const H5C_t *cache_ptr,
     /* Verify expected length of entry image */
     if((size_t)(p - *buf) != H5C__cache_image_block_entry_header_size(f))
         HGOTO_ERROR(H5E_CACHE, H5E_BADSIZE, FAIL, "Bad entry image len")
-    
-    /* If parent count greater than zero, allocate array for parent 
+
+    /* If parent count greater than zero, allocate array for parent
      * addresses, and decode addresses into the array.
      */
     if(fd_parent_count > 0) {
@@ -2053,9 +2053,9 @@ done:
 /*-------------------------------------------------------------------------
  * Function:    H5C__destroy_pf_entry_child_flush_deps()
  *
- * Purpose:     Destroy all flush dependencies in this the supplied 
+ * Purpose:     Destroy all flush dependencies in this the supplied
  *		prefetched entry is the parent.  Note that the children
- *		in these flush dependencies must be prefetched entries as 
+ *		in these flush dependencies must be prefetched entries as
  *		well.
  *
  *		As this action is part of the process of transferring all
@@ -2063,8 +2063,8 @@ done:
  *		prefetched entry, ensure that the data necessary to complete
  *		the transfer is retained.
  *
- *		Note: The current implementation of this function is 
- *		      quite inefficient -- mostly due to the current 
+ *		Note: The current implementation of this function is
+ *		      quite inefficient -- mostly due to the current
  *		      implementation of flush dependencies.  This should
  *		      be fixed at some point.
  *
@@ -2076,7 +2076,7 @@ done:
  *-------------------------------------------------------------------------
  */
 static herr_t
-H5C__destroy_pf_entry_child_flush_deps(H5C_t *cache_ptr, 
+H5C__destroy_pf_entry_child_flush_deps(H5C_t *cache_ptr,
     H5C_cache_entry_t *pf_entry_ptr, H5C_cache_entry_t **fd_children)
 {
     H5C_cache_entry_t * entry_ptr;
@@ -2103,8 +2103,8 @@ H5C__destroy_pf_entry_child_flush_deps(H5C_t *cache_ptr,
     while(entry_ptr != NULL) {
 	HDassert(entry_ptr->magic == H5C__H5C_CACHE_ENTRY_T_MAGIC);
 
-	/* Here we look at entry_ptr->flush_dep_nparents and not 
-         * entry_ptr->fd_parent_count as it is possible that some 
+	/* Here we look at entry_ptr->flush_dep_nparents and not
+         * entry_ptr->fd_parent_count as it is possible that some
 	 * or all of the prefetched flush dependency child relationships
 	 * have already been destroyed.
          */
@@ -2145,9 +2145,9 @@ H5C__destroy_pf_entry_child_flush_deps(H5C_t *cache_ptr,
 	            HGOTO_ERROR(H5E_CACHE, H5E_CANTUNDEPEND, FAIL, "can't destroy pf entry child flush dependency")
 
 #ifndef NDEBUG
-		/* Sanity check -- verify that the address of the parent 
+		/* Sanity check -- verify that the address of the parent
                  * appears in entry_ptr->fd_parent_addrs.  Must do a search,
-                 * as with flush dependency creates and destroys, 
+                 * as with flush dependency creates and destroys,
                  * entry_ptr->fd_parent_addrs and entry_ptr->flush_dep_parent
                  * can list parents in different order.
                  */
@@ -2181,8 +2181,8 @@ done:
 /*-------------------------------------------------------------------------
  * Function:    H5C__encode_cache_image_header()
  *
- * Purpose:     Encode the metadata cache image buffer header in the 
- *		supplied buffer.  Updates buffer pointer to the first byte 
+ * Purpose:     Encode the metadata cache image buffer header in the
+ *		supplied buffer.  Updates buffer pointer to the first byte
  *		after the header image in the buffer, or unchanged on failure.
  *
  * Return:      Non-negative on success/Negative on failure
@@ -2259,8 +2259,8 @@ done:
 /*-------------------------------------------------------------------------
  * Function:    H5C__encode_cache_image_entry()
  *
- * Purpose:     Encode the metadata cache image buffer header in the 
- *		supplied buffer.  Updates buffer pointer to the first byte 
+ * Purpose:     Encode the metadata cache image buffer header in the
+ *		supplied buffer.  Updates buffer pointer to the first byte
  *		after the entry in the buffer, or unchanged on failure.
  *
  * Return:      Non-negative on success/Negative on failure
@@ -2271,7 +2271,7 @@ done:
  *-------------------------------------------------------------------------
  */
 static herr_t
-H5C__encode_cache_image_entry(H5F_t *f, H5C_t *cache_ptr, uint8_t **buf, 
+H5C__encode_cache_image_entry(H5F_t *f, H5C_t *cache_ptr, uint8_t **buf,
     unsigned entry_num)
 {
     H5C_image_entry_t *	ie_ptr;                 /* Pointer to entry to encode */
@@ -2306,13 +2306,13 @@ H5C__encode_cache_image_entry(H5F_t *f, H5C_t *cache_ptr, uint8_t **buf,
     *p++ = (uint8_t)(ie_ptr->type_id);
 
     /* Compose and encode flags */
-    if(ie_ptr->is_dirty) 
+    if(ie_ptr->is_dirty)
 	flags |= H5C__MDCI_ENTRY_DIRTY_FLAG;
-    if(ie_ptr->lru_rank > 0) 
+    if(ie_ptr->lru_rank > 0)
 	flags |= H5C__MDCI_ENTRY_IN_LRU_FLAG;
     if(ie_ptr->fd_child_count > 0)
 	flags |= H5C__MDCI_ENTRY_IS_FD_PARENT_FLAG;
-    if(ie_ptr->fd_parent_count > 0) 
+    if(ie_ptr->fd_parent_count > 0)
 	flags |= H5C__MDCI_ENTRY_IS_FD_CHILD_FLAG;
     *p++ = flags;
 
@@ -2377,51 +2377,51 @@ done:
  *		flush dependency children. (Recall that the flush dependency
  *		height of an entry in a flush dependency relationship is the
  *		length of the longest path from the entry to a leaf entry --
- *		that is an entry with flush dependency parents, but no 
- *		flush dependency children.  With the introduction of the 
+ *		that is an entry with flush dependency parents, but no
+ *		flush dependency children.  With the introduction of the
  *		possibility of multiple flush dependency parents, we have
- *		a flush partial dependency latice, not a flush dependency 
- *		tree.  But since the partial latice is acyclic, the concept 
+ *		a flush partial dependency latice, not a flush dependency
+ *		tree.  But since the partial latice is acyclic, the concept
  *		of flush dependency height still makes sense.
  *
- *		The purpose of this function is to compute the flush 
+ *		The purpose of this function is to compute the flush
  *		dependency height of all entries that appear in the cache
- *		image.  
+ *		image.
  *
- *		At present, entries are included or excluded from the 
+ *		At present, entries are included or excluded from the
  *		cache image depending upon the ring in which they reside.
  *		Thus there is no chance that one side of a flush dependency
  *		will be in the cache image, and the other side not.
  *
  *		However, once we start placing a limit on the size of the
  *		cache image, or start excluding prefetched entries from
- *		the cache image if they haven't been accessed in some 
- *		number of file close / open cycles, this will no longer 
- *		be the case.  
+ *		the cache image if they haven't been accessed in some
+ *		number of file close / open cycles, this will no longer
+ *		be the case.
  *
  *		In particular, if a flush dependency child is dirty, and
  *		one of its flush dependency parents is dirty and not in
  *		the cache image, then the flush dependency child cannot
  *		be in the cache image without violating flush ordering.
  *
- *		Observe that a clean flush dependency child can be either 
- *		in or out of the cache image without effect on flush 
+ *		Observe that a clean flush dependency child can be either
+ *		in or out of the cache image without effect on flush
  *		dependencies.
  *
- *		Similarly, a flush dependency parent can always be part 
- *		of a cache image, regardless of whether it is clean or 
+ *		Similarly, a flush dependency parent can always be part
+ *		of a cache image, regardless of whether it is clean or
  *		dirty -- but remember that a flush dependency parent can
  *		also be a flush dependency child.
- *		
+ *
  *		Finally, note that for purposes of the cache image, flush
- *		dependency height ends when a flush dependecy relation 
+ *		dependency height ends when a flush dependecy relation
  *		passes off the cache image.
  *
- *		On exit, the flush dependency height of each entry in the 
+ *		On exit, the flush dependency height of each entry in the
  *		cache image should be calculated and stored in the cache
  *		entry.  Entries will be removed from the cache image if
  *		necessary to maintain flush ordering.
- *		
+ *
  * Return:      Non-negative on success/Negative on failure
  *
  * Programmer:  John Mainzer
@@ -2447,10 +2447,10 @@ H5C__prep_for_file_close__compute_fd_heights(const H5C_t *cache_ptr)
     HDassert(cache_ptr);
     HDassert(cache_ptr->magic == H5C__H5C_T_MAGIC);
 
-    /* Remove from the cache image all dirty entries that are 
+    /* Remove from the cache image all dirty entries that are
      * flush dependency children of dirty entries that are not in the
-     * cache image.  Must do this, as if we fail to do so, the parent 
-     * will be written to file before the child.  Since it is possible 
+     * cache image.  Must do this, as if we fail to do so, the parent
+     * will be written to file before the child.  Since it is possible
      * that the child will have dirty children of its own, this may take
      * multiple passes through the index list.
      */
@@ -2484,17 +2484,17 @@ H5C__prep_for_file_close__compute_fd_heights(const H5C_t *cache_ptr)
 
 	    entry_ptr = entry_ptr->il_next;
         } /* while ( entry_ptr != NULL ) */
-    } /* while ( ! done ) */ 
+    } /* while ( ! done ) */
 
     /* at present, entries are included in the cache image if they reside
-     * in a specified set of rings.  Thus it should be impossible for 
-     * entries_removed_from_image to be positive.  Assert that this is 
-     * so.  Note that this will change when we start aging entries out 
+     * in a specified set of rings.  Thus it should be impossible for
+     * entries_removed_from_image to be positive.  Assert that this is
+     * so.  Note that this will change when we start aging entries out
      * of the cache image.
      */
     HDassert(entries_removed_from_image == 0);
 
-    /* Next, remove from entries in the cache image, references to 
+    /* Next, remove from entries in the cache image, references to
      * flush dependency parents or children that are not in the cache image.
      */
     entry_ptr = cache_ptr->il_head;
@@ -2575,14 +2575,14 @@ H5C__prep_for_file_close__compute_fd_heights(const H5C_t *cache_ptr)
         entry_ptr = entry_ptr->il_next;
     } /* while (entry_ptr != NULL) */
 
-    /* At present, no extenal parent or child flush dependency links 
+    /* At present, no extenal parent or child flush dependency links
      * should exist -- hence the following assertions.  This will change
      * if we support ageout of entries in the cache image.
      */
     HDassert(external_child_fd_refs_removed == 0);
     HDassert(external_parent_fd_refs_removed == 0);
 
-    /* At this point we should have removed all flush dependencies that 
+    /* At this point we should have removed all flush dependencies that
      * cross cache image boundaries.  Now compute the flush dependency
      * heights for all entries in the image.
      *
@@ -2600,7 +2600,7 @@ H5C__prep_for_file_close__compute_fd_heights(const H5C_t *cache_ptr)
 	        parent_ptr = entry_ptr->flush_dep_parent[u];
 
 	        HDassert(parent_ptr->magic == H5C__H5C_CACHE_ENTRY_T_MAGIC);
-	        if(parent_ptr->include_in_image && parent_ptr->image_fd_height <= 0) 
+	        if(parent_ptr->include_in_image && parent_ptr->image_fd_height <= 0)
 		    H5C__prep_for_file_close__compute_fd_heights_real(parent_ptr, 1);
 	    } /* end for */
         } /* end if */
@@ -2623,37 +2623,37 @@ done:
  *
  *		The basic observation behind this function is as follows:
  *
- *		Suppose you have an entry E with a flush dependency 
- *		height of X.  Then the parents of E must all have 
+ *		Suppose you have an entry E with a flush dependency
+ *		height of X.  Then the parents of E must all have
  *		flush dependency X + 1 or greater.
  *
  *		Use this observation to compute flush dependency height
  *		of all entries in the cache image via the following
  *		recursive algorithm:
  *
- *		1) On entry, set the flush dependency height of the 
+ *		1) On entry, set the flush dependency height of the
  *		   supplied cache entry to the supplied value.
  *
- *		2) Examine all the flush dependency parents of the 
- *		   supplied entry.  
+ *		2) Examine all the flush dependency parents of the
+ *		   supplied entry.
  *
- *		   If the parent is in the cache image, and has flush 
+ *		   If the parent is in the cache image, and has flush
  *		   dependency height less than or equal to the flush
- *		   dependency height of the current entry, call the 
+ *		   dependency height of the current entry, call the
  *		   recursive routine on the parent with flush dependency
- *		   height equal to the flush dependency height of the 
+ *		   height equal to the flush dependency height of the
  *		   child plus 1.
  *
  *		   Otherwise do nothing.
  *
  *		Observe that if the flush dependency height of all entries
- *		in the image is initialized to zero, and if this recursive 
- *		function is called with flush dependency height 0 on all 
- *		entries in the cache image with FD parents in the image, 
- *		but without FD children in the image, the correct flush 
- *		dependency height should be set for all entries in the 
+ *		in the image is initialized to zero, and if this recursive
+ *		function is called with flush dependency height 0 on all
+ *		entries in the cache image with FD parents in the image,
+ *		but without FD children in the image, the correct flush
+ *		dependency height should be set for all entries in the
  *		cache image.
- *		
+ *
  * Return:      void
  *
  * Programmer:  John Mainzer
@@ -2698,9 +2698,9 @@ H5C__prep_for_file_close__compute_fd_heights_real(H5C_cache_entry_t  *entry_ptr,
  * Function:    H5C__prep_for_file_close__setup_image_entries_array
  *
  * Purpose:     Allocate space for the image_entries array, and load
- *		each instance of H5C_image_entry_t in the array with 
+ *		each instance of H5C_image_entry_t in the array with
  *		the data necessary to construct the metadata cache image.
- *		
+ *
  * Return:      Non-negative on success/Negative on failure
  *
  * Programmer:  John Mainzer
@@ -2758,14 +2758,14 @@ H5C__prep_for_file_close__setup_image_entries_array(H5C_t *cache_ptr)
 	    image_entries[u].ring                 = entry_ptr->ring;
 
 	    /* When a prefetched entry is included in the image, store
-             * its underlying type id in the image entry, not 
+             * its underlying type id in the image entry, not
              * H5AC_PREFETCHED_ENTRY_ID.  In passing, also increment
 	     * the age (up to H5AC__CACHE_IMAGE__ENTRY_AGEOUT__MAX).
              */
 	    if(entry_ptr->type->id == H5AC_PREFETCHED_ENTRY_ID) {
 		image_entries[u].type_id          = entry_ptr->prefetch_type_id;
 		image_entries[u].age              = entry_ptr->age + 1;
-		
+
 		if(image_entries[u].age > H5AC__CACHE_IMAGE__ENTRY_AGEOUT__MAX)
 		    image_entries[u].age = H5AC__CACHE_IMAGE__ENTRY_AGEOUT__MAX;
 	    } /* end if */
@@ -2780,13 +2780,13 @@ H5C__prep_for_file_close__setup_image_entries_array(H5C_t *cache_ptr)
 	    image_entries[u].fd_parent_count      = entry_ptr->fd_parent_count;
 	    image_entries[u].fd_parent_addrs      = entry_ptr->fd_parent_addrs;
 	    image_entries[u].fd_child_count       = entry_ptr->fd_child_count;
-	    image_entries[u].fd_dirty_child_count = 
+	    image_entries[u].fd_dirty_child_count =
 						entry_ptr->fd_dirty_child_count;
 	    image_entries[u].image_ptr            = entry_ptr->image_ptr;
 
-	    /* Null out entry_ptr->fd_parent_addrs and set 
+	    /* Null out entry_ptr->fd_parent_addrs and set
              * entry_ptr->fd_parent_count to zero so that ownership of the
-             * flush dependency parents address array is transferred to the 
+             * flush dependency parents address array is transferred to the
 	     * image entry.
              */
 	    entry_ptr->fd_parent_count = 0;
@@ -2819,8 +2819,8 @@ done:
 /*-------------------------------------------------------------------------
  * Function:    H5C__prep_for_file_close__scan_entries
  *
- * Purpose:     Scan all entries in the metadata cache, and store all 
- *		entry specific data required for construction of the 
+ * Purpose:     Scan all entries in the metadata cache, and store all
+ *		entry specific data required for construction of the
  *		metadata cache image block and likely to be discarded
  *		or modified during the cache flush on file close.
  *
@@ -2838,7 +2838,7 @@ done:
  *
  *		Finally, compute the size of the metadata cache image
  *		block.
- *		
+ *
  * Return:      Non-negative on success/Negative on failure
  *
  * Programmer:  John Mainzer
@@ -2891,7 +2891,7 @@ H5C__prep_for_file_close__scan_entries(const H5F_t *f, H5C_t *cache_ptr)
         HDassert(entry_ptr->image_ptr);
 
 	/* Initially, we mark all entries in the rings included
-         * in the cache image as being included in the in the 
+         * in the cache image as being included in the in the
          * image.  Depending on circumstances, we may exclude some
          * of these entries later.
          */
@@ -2907,7 +2907,7 @@ H5C__prep_for_file_close__scan_entries(const H5F_t *f, H5C_t *cache_ptr)
 	    entry_ptr->image_fd_height = 0;     /* will compute this later */
 
 	    /* Initially, include all flush dependency parents in the
-             * the list of flush dependencies to be stored in the 
+             * the list of flush dependencies to be stored in the
              * image.  We may remove some or all of these later.
              */
 	    if(entry_ptr->flush_dep_nparents > 0) {
@@ -2915,7 +2915,7 @@ H5C__prep_for_file_close__scan_entries(const H5F_t *f, H5C_t *cache_ptr)
                  * as needed.
                  */
 		if(entry_ptr->flush_dep_nparents == entry_ptr->fd_parent_count ) {
-		    /* parent addresses array should already be allocated 
+		    /* parent addresses array should already be allocated
                      * and of the correct size.
                      */
 		    HDassert(entry_ptr->fd_parent_addrs);
@@ -2947,8 +2947,8 @@ H5C__prep_for_file_close__scan_entries(const H5F_t *f, H5C_t *cache_ptr)
 		HDassert(entry_ptr->fd_parent_addrs == NULL);
 
 	    /* Initially, all flush dependency children are included int
-             * the count of flush dependency child relationships to be 
-             * represented in the cache image.  Some or all of these 
+             * the count of flush dependency child relationships to be
+             * represented in the cache image.  Some or all of these
              * may be dropped from the image later.
              */
 	    if(entry_ptr->flush_dep_nchildren > 0) {
@@ -2970,23 +2970,23 @@ H5C__prep_for_file_close__scan_entries(const H5F_t *f, H5C_t *cache_ptr)
     /* Now compute the flush dependency heights of all flush dependency
      * relationships to be represented in the image.
      *
-     * If all entries in the target rings are included in the 
-     * image, the flush dependency heights are simply the heights 
+     * If all entries in the target rings are included in the
+     * image, the flush dependency heights are simply the heights
      * of all flush dependencies in the target rings.
      *
-     * However, if we restrict appearance in the cache image either 
-     * by number of entries in the image, restrictions on the number 
-     * of times a prefetched entry can appear in an image, or image 
+     * However, if we restrict appearance in the cache image either
+     * by number of entries in the image, restrictions on the number
+     * of times a prefetched entry can appear in an image, or image
      * size, it is possible that flush dependency parents or children
      * of entries that are in the image may not be included in the
-     * the image.  In this case, we must prune all flush dependency 
-     * relationships that cross the image boundary, and all exclude 
-     * from the image all dirty flush dependency children that have 
-     * a dirty flush dependency parent that is not in the image. 
+     * the image.  In this case, we must prune all flush dependency
+     * relationships that cross the image boundary, and all exclude
+     * from the image all dirty flush dependency children that have
+     * a dirty flush dependency parent that is not in the image.
      * This is necessary to preserve the required flush ordering.
-     * 
-     * These details are tended to by the following call to 
-     * H5C__prep_for_file_close__compute_fd_heights().  Because the 
+     *
+     * These details are tended to by the following call to
+     * H5C__prep_for_file_close__compute_fd_heights().  Because the
      * exact contents of the image cannot be known until after this
      * call, computation of the image size is delayed.
      */
@@ -2994,7 +2994,7 @@ H5C__prep_for_file_close__scan_entries(const H5F_t *f, H5C_t *cache_ptr)
         HGOTO_ERROR(H5E_CACHE, H5E_SYSTEM, FAIL, "computation of flush dependency heights failed?!?")
 
     /* At this point, all entries that will appear in the cache
-     * image should be marked correctly.  Compute the size of the 
+     * image should be marked correctly.  Compute the size of the
      * cache image.
      */
     entries_visited = 0;
@@ -3031,11 +3031,11 @@ H5C__prep_for_file_close__scan_entries(const H5F_t *f, H5C_t *cache_ptr)
     /* Now scan the LRU list to set the lru_rank fields of all entries
      * on the LRU.
      *
-     * Note that we start with rank 1, and increment by 1 with each 
-     * entry on the LRU.  
+     * Note that we start with rank 1, and increment by 1 with each
+     * entry on the LRU.
      *
      * Note that manually pinned entryies will have lru_rank -1,
-     * and no flush dependency.  Putting these entries at the head of 
+     * and no flush dependency.  Putting these entries at the head of
      * the reconstructed LRU should be appropriate.
      */
     entry_ptr = cache_ptr->LRU_head_ptr;
@@ -3045,11 +3045,11 @@ H5C__prep_for_file_close__scan_entries(const H5F_t *f, H5C_t *cache_ptr)
 
         /* to avoid confusion, don't set lru_rank on epoch markers.
          * Note that we still increment the lru_rank, so that the holes
-         * in the sequence of entries on the LRU will indicate the 
-         * locations of epoch markers (if any) when we reconstruct 
+         * in the sequence of entries on the LRU will indicate the
+         * locations of epoch markers (if any) when we reconstruct
          * the LRU.
          *
-         * Do not set lru_rank or increment lru_rank for entries 
+         * Do not set lru_rank or increment lru_rank for entries
          * that will not be included in the cache image.
          */
 	if(entry_ptr->type->id == H5AC_EPOCH_MARKER_ID)
@@ -3076,9 +3076,9 @@ done:
  * Function:    H5C__reconstruct_cache_contents()
  *
  * Purpose:     Scan the image buffer, and create a prefetched
- *		cache entry for every entry in the buffer.  Insert the 
- *		prefetched entries in the index and the LRU, and 
- *		reconstruct any flush dependencies.  Order the entries 
+ *		cache entry for every entry in the buffer.  Insert the
+ *		prefetched entries in the index and the LRU, and
+ *		reconstruct any flush dependencies.  Order the entries
  *		in the LRU as indicated by the stored lru_ranks.
  *
  * Return:      SUCCEED on success, and FAIL on failure.
@@ -3127,11 +3127,11 @@ H5C__reconstruct_cache_contents(H5F_t *f, H5C_t *cache_ptr)
 	if(NULL == (pf_entry_ptr = H5C__reconstruct_cache_entry(f, cache_ptr, &p)))
             HGOTO_ERROR(H5E_CACHE, H5E_SYSTEM, FAIL, "reconstruction of cache entry failed")
 
-	/* Note that we make no checks on available cache space before 
+	/* Note that we make no checks on available cache space before
          * inserting the reconstructed entry into the metadata cache.
          *
          * This is OK since the cache must be almost empty at the beginning
-         * of the process, and since we check cache size at the end of the 
+         * of the process, and since we check cache size at the end of the
          * reconstruction process.
          */
 
@@ -3147,7 +3147,7 @@ H5C__reconstruct_cache_contents(H5F_t *f, H5C_t *cache_ptr)
 
 	H5C__UPDATE_STATS_FOR_PREFETCH(cache_ptr, pf_entry_ptr->is_dirty)
 
-	/* If the prefetched entry is the child in one or more flush 
+	/* If the prefetched entry is the child in one or more flush
          * dependency relationships, recreate those flush dependencies.
          */
 	for(v = 0; v < pf_entry_ptr->fd_parent_count; v++) {
@@ -3171,7 +3171,7 @@ H5C__reconstruct_cache_contents(H5F_t *f, H5C_t *cache_ptr)
              */
             H5C__UPDATE_RP_FOR_PROTECT(cache_ptr, parent_ptr, FAIL)
             parent_ptr->is_protected = TRUE;
-	    
+
 	    /* Setup the flush dependency */
 	    if(H5C_create_flush_dependency(parent_ptr, pf_entry_ptr) < 0)
 		HGOTO_ERROR(H5E_CACHE, H5E_CANTDEPEND, FAIL, "Can't restore flush dependency")
@@ -3211,7 +3211,7 @@ H5C__reconstruct_cache_contents(H5F_t *f, H5C_t *cache_ptr)
         pf_entry_ptr = pf_entry_ptr->il_next;
     } /* end while */
 
-    /* Scan the LRU, and verify the expected ordering of the 
+    /* Scan the LRU, and verify the expected ordering of the
      * prefetched entries.
      */
     {
@@ -3233,7 +3233,7 @@ H5C__reconstruct_cache_contents(H5F_t *f, H5C_t *cache_ptr)
                 HDassert((entry_ptr->lru_rank == -1) ||
                          (entry_ptr->lru_rank > i));
 
-                if ( ( entry_ptr->lru_rank > 1 ) && 
+                if ( ( entry_ptr->lru_rank > 1 ) &&
                      ( entry_ptr->lru_rank > i + 1 ) )
 
                     lru_rank_holes += entry_ptr->lru_rank - (i + 1);
@@ -3245,9 +3245,9 @@ H5C__reconstruct_cache_contents(H5F_t *f, H5C_t *cache_ptr)
             entry_ptr = entry_ptr->next;
         } /* end while */
 
-	/* Holes in the sequences of LRU ranks can appear due to epoch 
+	/* Holes in the sequences of LRU ranks can appear due to epoch
          * markers.  They are left in to allow re-insertion of the
-         * epoch markers on reconstruction of the cache -- thus 
+         * epoch markers on reconstruction of the cache -- thus
          * the following sanity check will have to be revised when
          * we add code to store and restore adaptive resize status.
          */
@@ -3255,7 +3255,7 @@ H5C__reconstruct_cache_contents(H5F_t *f, H5C_t *cache_ptr)
     } /* end block */
 #endif /* NDEBUG */
 
-    /* Check to see if the cache is oversize, and evict entries as 
+    /* Check to see if the cache is oversize, and evict entries as
      * necessary to remain within limits.
      */
     if(cache_ptr->index_size >= cache_ptr->max_cache_size) {
@@ -3289,7 +3289,7 @@ done:
  *		Return a pointer to the newly allocated cache entry,
  *		or NULL on failure.
  *
- * Return:      Pointer to the new instance of H5C_cache_entry on success, 
+ * Return:      Pointer to the new instance of H5C_cache_entry on success,
  *		or NULL on failure.
  *
  * Programmer:  John Mainzer
@@ -3347,7 +3347,7 @@ H5C__reconstruct_cache_entry(const H5F_t *f, H5C_t *cache_ptr,
         is_fd_child = TRUE;
 #endif /* NDEBUG */ /* only used in assertions */
 
-    /* Force dirty entries to clean if the file read only -- must do 
+    /* Force dirty entries to clean if the file read only -- must do
      * this as otherwise the cache will attempt to write them on file
      * close.  Since the file is R/O, the metadata cache image superblock
      * extension message and the cache image block will not be removed.
@@ -3355,7 +3355,7 @@ H5C__reconstruct_cache_entry(const H5F_t *f, H5C_t *cache_ptr,
      *
      * However, if the dirty entry (marked clean for purposes of the R/O
      * file open) is evicted and then referred to, the cache will read
-     * either invalid or obsolete data from the file.  Handle this by 
+     * either invalid or obsolete data from the file.  Handle this by
      * setting the prefetched_dirty field, and hiding such entries from
      * the eviction candidate selection algorithm.
      */
@@ -3375,7 +3375,7 @@ H5C__reconstruct_cache_entry(const H5F_t *f, H5C_t *cache_ptr,
 
     /* Decode dirty dependency child count */
     UINT16DECODE(p, pf_entry_ptr->fd_dirty_child_count);
-    if(!file_is_rw) 
+    if(!file_is_rw)
         pf_entry_ptr->fd_dirty_child_count      = 0;
     if(pf_entry_ptr->fd_dirty_child_count > pf_entry_ptr->fd_child_count)
         HGOTO_ERROR(H5E_CACHE, H5E_BADVALUE, NULL, "invalid dirty flush dependency child count")
@@ -3401,8 +3401,8 @@ H5C__reconstruct_cache_entry(const H5F_t *f, H5C_t *cache_ptr,
     /* Verify expected length of entry image */
     if((size_t)(p - *buf) != H5C__cache_image_block_entry_header_size(f))
         HGOTO_ERROR(H5E_CACHE, H5E_BADSIZE, NULL, "Bad entry image len")
-    
-    /* If parent count greater than zero, allocate array for parent 
+
+    /* If parent count greater than zero, allocate array for parent
      * addresses, and decode addresses into the array.
      */
     if(pf_entry_ptr->fd_parent_count > 0) {
@@ -3457,7 +3457,7 @@ done:
 /*-------------------------------------------------------------------------
  * Function:    H5C__write_cache_image_superblock_msg
  *
- * Purpose:     Write the cache image superblock extension message, 
+ * Purpose:     Write the cache image superblock extension message,
  *		creating if specified.
  *
  *		In general, the size and location of the cache image block
@@ -3560,7 +3560,7 @@ H5C__write_cache_image(H5F_t *f, const H5C_t *cache_ptr)
     } /* end if */
 } /* end block */
 #endif /* H5_HAVE_PARALLEL */
-	
+
 done:
     FUNC_LEAVE_NOAPI(ret_value)
 } /* H5C__write_cache_image() */
diff --git a/src/H5Clog.c b/src/H5Clog.c
index cf9b7e8..794d6bb 100644
--- a/src/H5Clog.c
+++ b/src/H5Clog.c
@@ -313,7 +313,7 @@ H5C_get_logging_status(const H5C_t *cache, /*OUT*/ hbool_t *is_enabled,
  *-------------------------------------------------------------------------
  */
 herr_t
-H5C_log_write_create_cache_msg(H5C_t *cache, herr_t fxn_ret_value) 
+H5C_log_write_create_cache_msg(H5C_t *cache, herr_t fxn_ret_value)
 {
     herr_t ret_value = SUCCEED;         /* Return value */
 
@@ -348,7 +348,7 @@ done:
  *-------------------------------------------------------------------------
  */
 herr_t
-H5C_log_write_destroy_cache_msg(H5C_t *cache) 
+H5C_log_write_destroy_cache_msg(H5C_t *cache)
 {
     herr_t ret_value = SUCCEED;         /* Return value */
 
diff --git a/src/H5Clog_json.c b/src/H5Clog_json.c
index 5ac354d..ab25a55 100644
--- a/src/H5Clog_json.c
+++ b/src/H5Clog_json.c
@@ -143,7 +143,7 @@ static H5C_log_class_t H5C_json_log_class_g = {
 /*-------------------------------------------------------------------------
  * Function:    H5C__json_write_log_message
  *
- * Purpose:     Write a message to the log file and flush the file. 
+ * Purpose:     Write a message to the log file and flush the file.
  *              The message string is neither modified nor freed.
  *
  * Return:      SUCCEED/FAIL
@@ -171,7 +171,7 @@ H5C__json_write_log_message(H5C_log_json_udata_t *json_udata)
     if((int)n_chars != HDfprintf(json_udata->outfile, json_udata->message))
         HGOTO_ERROR(H5E_CACHE, H5E_LOGGING, FAIL, "error writing log message")
     HDmemset((void *)(json_udata->message), 0, (size_t)(n_chars * sizeof(char)));
-            
+
 done:
     FUNC_LEAVE_NOAPI(ret_value)
 } /* H5C__json_write_log_message() */
@@ -222,7 +222,7 @@ H5C_log_json_set_up(H5C_log_info_t *log_info, const char log_location[], int mpi
     if(NULL == (log_info->udata = H5MM_calloc(sizeof(H5C_log_json_udata_t))))
         HGOTO_ERROR(H5E_CACHE, H5E_CANTALLOC, FAIL, "memory allocation failed")
     json_udata = (H5C_log_json_udata_t *)(log_info->udata);
-    
+
     /* Allocate memory for the message buffer */
     if(NULL == (json_udata->message = (char *)H5MM_calloc(H5C_MAX_JSON_LOG_MSG_SIZE * sizeof(char))))
         HGOTO_ERROR(H5E_CACHE, H5E_CANTALLOC, FAIL, "memory allocation failed")
@@ -341,7 +341,7 @@ H5C__json_write_start_log_msg(void *udata)
     HDassert(json_udata->message);
 
     /* Create the log message string (opens the JSON array) */
-    HDsnprintf(json_udata->message, H5C_MAX_JSON_LOG_MSG_SIZE, 
+    HDsnprintf(json_udata->message, H5C_MAX_JSON_LOG_MSG_SIZE,
 "\
 {\n\
 \"HDF5 metadata cache log messages\" : [\n\
@@ -386,7 +386,7 @@ H5C__json_write_stop_log_msg(void *udata)
     HDassert(json_udata->message);
 
     /* Create the log message string (closes the JSON array) */
-    HDsnprintf(json_udata->message, H5C_MAX_JSON_LOG_MSG_SIZE, 
+    HDsnprintf(json_udata->message, H5C_MAX_JSON_LOG_MSG_SIZE,
 "\
 {\
 \"timestamp\":%lld,\
@@ -399,7 +399,7 @@ H5C__json_write_stop_log_msg(void *udata)
     /* Write the log message to the file */
     if(H5C__json_write_log_message(json_udata) < 0)
         HGOTO_ERROR(H5E_CACHE, H5E_LOGGING, FAIL, "unable to emit log message")
- 
+
 done:
     FUNC_LEAVE_NOAPI(ret_value)
 } /* H5C__json_write_stop_log_msg() */
@@ -418,7 +418,7 @@ done:
  *-------------------------------------------------------------------------
  */
 static herr_t
-H5C__json_write_create_cache_log_msg(void *udata, herr_t fxn_ret_value) 
+H5C__json_write_create_cache_log_msg(void *udata, herr_t fxn_ret_value)
 {
     H5C_log_json_udata_t *json_udata = (H5C_log_json_udata_t *)(udata);
     herr_t ret_value = SUCCEED;         /* Return value */
@@ -430,7 +430,7 @@ H5C__json_write_create_cache_log_msg(void *udata, herr_t fxn_ret_value)
     HDassert(json_udata->message);
 
     /* Create the log message string */
-    HDsnprintf(json_udata->message, H5C_MAX_JSON_LOG_MSG_SIZE, 
+    HDsnprintf(json_udata->message, H5C_MAX_JSON_LOG_MSG_SIZE,
 "\
 {\
 \"timestamp\":%lld,\
@@ -474,7 +474,7 @@ H5C__json_write_destroy_cache_log_msg(void *udata)
     HDassert(json_udata->message);
 
     /* Create the log message string */
-    HDsnprintf(json_udata->message, H5C_MAX_JSON_LOG_MSG_SIZE, 
+    HDsnprintf(json_udata->message, H5C_MAX_JSON_LOG_MSG_SIZE,
 "\
 {\
 \"timestamp\":%lld,\
@@ -517,7 +517,7 @@ H5C__json_write_evict_cache_log_msg(void *udata, herr_t fxn_ret_value)
     HDassert(json_udata->message);
 
     /* Create the log message string */
-    HDsnprintf(json_udata->message, H5C_MAX_JSON_LOG_MSG_SIZE, 
+    HDsnprintf(json_udata->message, H5C_MAX_JSON_LOG_MSG_SIZE,
 "\
 {\
 \"timestamp\":%lld,\
@@ -562,7 +562,7 @@ H5C__json_write_expunge_entry_log_msg(void *udata, haddr_t address,
     HDassert(json_udata->message);
 
     /* Create the log message string */
-    HDsnprintf(json_udata->message, H5C_MAX_JSON_LOG_MSG_SIZE, 
+    HDsnprintf(json_udata->message, H5C_MAX_JSON_LOG_MSG_SIZE,
 "\
 {\
 \"timestamp\":%lld,\
@@ -609,7 +609,7 @@ H5C__json_write_flush_cache_log_msg(void *udata, herr_t fxn_ret_value)
     HDassert(json_udata->message);
 
     /* Create the log message string */
-    HDsnprintf(json_udata->message, H5C_MAX_JSON_LOG_MSG_SIZE, 
+    HDsnprintf(json_udata->message, H5C_MAX_JSON_LOG_MSG_SIZE,
 "\
 {\
 \"timestamp\":%lld,\
@@ -654,7 +654,7 @@ H5C__json_write_insert_entry_log_msg(void *udata, haddr_t address,
     HDassert(json_udata->message);
 
     /* Create the log message string */
-    HDsnprintf(json_udata->message, H5C_MAX_JSON_LOG_MSG_SIZE, 
+    HDsnprintf(json_udata->message, H5C_MAX_JSON_LOG_MSG_SIZE,
 "\
 {\
 \"timestamp\":%lld,\
@@ -705,7 +705,7 @@ H5C__json_write_mark_entry_dirty_log_msg(void *udata, const H5C_cache_entry_t *e
     HDassert(entry);
 
     /* Create the log message string */
-    HDsnprintf(json_udata->message, H5C_MAX_JSON_LOG_MSG_SIZE, 
+    HDsnprintf(json_udata->message, H5C_MAX_JSON_LOG_MSG_SIZE,
 "\
 {\
 \"timestamp\":%lld,\
@@ -752,7 +752,7 @@ H5C__json_write_mark_entry_clean_log_msg(void *udata, const H5C_cache_entry_t *e
     HDassert(entry);
 
     /* Create the log message string */
-    HDsnprintf(json_udata->message, H5C_MAX_JSON_LOG_MSG_SIZE, 
+    HDsnprintf(json_udata->message, H5C_MAX_JSON_LOG_MSG_SIZE,
 "\
 {\
 \"timestamp\":%lld,\
@@ -799,7 +799,7 @@ H5C__json_write_mark_unserialized_entry_log_msg(void *udata,
     HDassert(entry);
 
     /* Create the log message string */
-    HDsnprintf(json_udata->message, H5C_MAX_JSON_LOG_MSG_SIZE, 
+    HDsnprintf(json_udata->message, H5C_MAX_JSON_LOG_MSG_SIZE,
 "\
 {\
 \"timestamp\":%lld,\
@@ -846,7 +846,7 @@ H5C__json_write_mark_serialized_entry_log_msg(void *udata, const H5C_cache_entry
     HDassert(entry);
 
     /* Create the log message string */
-    HDsnprintf(json_udata->message, H5C_MAX_JSON_LOG_MSG_SIZE, 
+    HDsnprintf(json_udata->message, H5C_MAX_JSON_LOG_MSG_SIZE,
 "\
 {\
 \"timestamp\":%lld,\
@@ -892,7 +892,7 @@ H5C__json_write_move_entry_log_msg(void *udata, haddr_t old_addr, haddr_t new_ad
     HDassert(json_udata->message);
 
     /* Create the log message string */
-    HDsnprintf(json_udata->message, H5C_MAX_JSON_LOG_MSG_SIZE, 
+    HDsnprintf(json_udata->message, H5C_MAX_JSON_LOG_MSG_SIZE,
 "\
 {\
 \"timestamp\":%lld,\
@@ -903,7 +903,7 @@ H5C__json_write_move_entry_log_msg(void *udata, haddr_t old_addr, haddr_t new_ad
 \"returned\":%d\
 },\n\
 "
-    , (long long)HDtime(NULL), (unsigned long)old_addr, 
+    , (long long)HDtime(NULL), (unsigned long)old_addr,
       (unsigned long)new_addr, type_id, (int)fxn_ret_value);
 
     /* Write the log message to the file */
@@ -942,7 +942,7 @@ H5C__json_write_pin_entry_log_msg(void *udata, const H5C_cache_entry_t *entry,
     HDassert(entry);
 
     /* Create the log message string */
-    HDsnprintf(json_udata->message, H5C_MAX_JSON_LOG_MSG_SIZE, 
+    HDsnprintf(json_udata->message, H5C_MAX_JSON_LOG_MSG_SIZE,
 "\
 {\
 \"timestamp\":%lld,\
@@ -951,7 +951,7 @@ H5C__json_write_pin_entry_log_msg(void *udata, const H5C_cache_entry_t *entry,
 \"returned\":%d\
 },\n\
 "
-    , (long long)HDtime(NULL), (unsigned long)entry->addr, 
+    , (long long)HDtime(NULL), (unsigned long)entry->addr,
       (int)fxn_ret_value);
 
     /* Write the log message to the file */
@@ -992,7 +992,7 @@ H5C__json_write_create_fd_log_msg(void *udata, const H5C_cache_entry_t *parent,
     HDassert(child);
 
     /* Create the log message string */
-    HDsnprintf(json_udata->message, H5C_MAX_JSON_LOG_MSG_SIZE, 
+    HDsnprintf(json_udata->message, H5C_MAX_JSON_LOG_MSG_SIZE,
 "\
 {\
 \"timestamp\":%lld,\
@@ -1002,7 +1002,7 @@ H5C__json_write_create_fd_log_msg(void *udata, const H5C_cache_entry_t *parent,
 \"returned\":%d\
 },\n\
 "
-    , (long long)HDtime(NULL), (unsigned long)parent->addr, 
+    , (long long)HDtime(NULL), (unsigned long)parent->addr,
       (unsigned long)child->addr, (int)fxn_ret_value);
 
     /* Write the log message to the file */
@@ -1043,11 +1043,11 @@ H5C__json_write_protect_entry_log_msg(void *udata, const H5C_cache_entry_t *entr
 
     if(H5C__READ_ONLY_FLAG == flags)
         HDstrcpy(rw_s, "READ");
-    else 
+    else
         HDstrcpy(rw_s, "WRITE");
 
     /* Create the log message string */
-    HDsnprintf(json_udata->message, H5C_MAX_JSON_LOG_MSG_SIZE, 
+    HDsnprintf(json_udata->message, H5C_MAX_JSON_LOG_MSG_SIZE,
 "\
 {\
 \"timestamp\":%lld,\
@@ -1059,7 +1059,7 @@ H5C__json_write_protect_entry_log_msg(void *udata, const H5C_cache_entry_t *entr
 \"returned\":%d\
 },\n\
 "
-    , (long long)HDtime(NULL), (unsigned long)entry->addr, 
+    , (long long)HDtime(NULL), (unsigned long)entry->addr,
       type_id, rw_s, (int)entry->size, (int)fxn_ret_value);
 
     /* Write the log message to the file */
@@ -1098,7 +1098,7 @@ H5C__json_write_resize_entry_log_msg(void *udata, const H5C_cache_entry_t *entry
     HDassert(entry);
 
     /* Create the log message string */
-    HDsnprintf(json_udata->message, H5C_MAX_JSON_LOG_MSG_SIZE, 
+    HDsnprintf(json_udata->message, H5C_MAX_JSON_LOG_MSG_SIZE,
 "\
 {\
 \"timestamp\":%lld,\
@@ -1108,7 +1108,7 @@ H5C__json_write_resize_entry_log_msg(void *udata, const H5C_cache_entry_t *entry
 \"returned\":%d\
 },\n\
 "
-    , (long long)HDtime(NULL), (unsigned long)entry->addr, 
+    , (long long)HDtime(NULL), (unsigned long)entry->addr,
       (int)new_size, (int)fxn_ret_value);
 
     /* Write the log message to the file */
@@ -1147,7 +1147,7 @@ H5C__json_write_unpin_entry_log_msg(void *udata, const H5C_cache_entry_t *entry,
     HDassert(entry);
 
     /* Create the log message string */
-    HDsnprintf(json_udata->message, H5C_MAX_JSON_LOG_MSG_SIZE, 
+    HDsnprintf(json_udata->message, H5C_MAX_JSON_LOG_MSG_SIZE,
 "\
 {\
 \"timestamp\":%lld,\
@@ -1156,7 +1156,7 @@ H5C__json_write_unpin_entry_log_msg(void *udata, const H5C_cache_entry_t *entry,
 \"returned\":%d\
 },\n\
 "
-    , (long long)HDtime(NULL), (unsigned long)entry->addr, 
+    , (long long)HDtime(NULL), (unsigned long)entry->addr,
       (int)fxn_ret_value);
 
     /* Write the log message to the file */
@@ -1197,7 +1197,7 @@ H5C__json_write_destroy_fd_log_msg(void *udata, const H5C_cache_entry_t *parent,
     HDassert(child);
 
     /* Create the log message string */
-    HDsnprintf(json_udata->message, H5C_MAX_JSON_LOG_MSG_SIZE, 
+    HDsnprintf(json_udata->message, H5C_MAX_JSON_LOG_MSG_SIZE,
 "\
 {\
 \"timestamp\":%lld,\
@@ -1207,7 +1207,7 @@ H5C__json_write_destroy_fd_log_msg(void *udata, const H5C_cache_entry_t *parent,
 \"returned\":%d\
 },\n\
 "
-    , (long long)HDtime(NULL), (unsigned long)parent->addr, 
+    , (long long)HDtime(NULL), (unsigned long)parent->addr,
       (unsigned long)child->addr, (int)fxn_ret_value);
 
     /* Write the log message to the file */
@@ -1245,7 +1245,7 @@ H5C__json_write_unprotect_entry_log_msg(void *udata, haddr_t address,
     HDassert(json_udata->message);
 
     /* Create the log message string */
-    HDsnprintf(json_udata->message, H5C_MAX_JSON_LOG_MSG_SIZE, 
+    HDsnprintf(json_udata->message, H5C_MAX_JSON_LOG_MSG_SIZE,
 "\
 {\
 \"timestamp\":%lld,\
@@ -1256,7 +1256,7 @@ H5C__json_write_unprotect_entry_log_msg(void *udata, haddr_t address,
 \"returned\":%d\
 },\n\
 "
-    , (long long)HDtime(NULL), (unsigned long)address, 
+    , (long long)HDtime(NULL), (unsigned long)address,
       type_id, flags, (int)fxn_ret_value);
 
     /* Write the log message to the file */
@@ -1295,7 +1295,7 @@ H5C__json_write_set_cache_config_log_msg(void *udata, const H5AC_cache_config_t
     HDassert(config);
 
     /* Create the log message string */
-    HDsnprintf(json_udata->message, H5C_MAX_JSON_LOG_MSG_SIZE, 
+    HDsnprintf(json_udata->message, H5C_MAX_JSON_LOG_MSG_SIZE,
 "\
 {\
 \"timestamp\":%lld,\
@@ -1342,7 +1342,7 @@ H5C__json_write_remove_entry_log_msg(void *udata, const H5C_cache_entry_t *entry
     HDassert(entry);
 
     /* Create the log message string */
-    HDsnprintf(json_udata->message, H5C_MAX_JSON_LOG_MSG_SIZE, 
+    HDsnprintf(json_udata->message, H5C_MAX_JSON_LOG_MSG_SIZE,
 "\
 {\
 \"timestamp\":%lld,\
@@ -1351,7 +1351,7 @@ H5C__json_write_remove_entry_log_msg(void *udata, const H5C_cache_entry_t *entry
 \"returned\":%d\
 },\n\
 "
-    , (long long)HDtime(NULL), (unsigned long)entry->addr, 
+    , (long long)HDtime(NULL), (unsigned long)entry->addr,
       (int)fxn_ret_value);
 
     /* Write the log message to the file */
diff --git a/src/H5Clog_trace.c b/src/H5Clog_trace.c
index 713f333..63fe382 100644
--- a/src/H5Clog_trace.c
+++ b/src/H5Clog_trace.c
@@ -138,7 +138,7 @@ static H5C_log_class_t H5C_trace_log_class_g = {
 /*-------------------------------------------------------------------------
  * Function:    H5C__trace_write_log_message
  *
- * Purpose:     Write a message to the log file and flush the file. 
+ * Purpose:     Write a message to the log file and flush the file.
  *              The message string is neither modified nor freed.
  *
  * Return:      SUCCEED/FAIL
@@ -166,7 +166,7 @@ H5C__trace_write_log_message(H5C_log_trace_udata_t *trace_udata)
     if((int)n_chars != HDfprintf(trace_udata->outfile, trace_udata->message))
         HGOTO_ERROR(H5E_CACHE, H5E_LOGGING, FAIL, "error writing log message")
     HDmemset((void *)(trace_udata->message), 0, (size_t)(n_chars * sizeof(char)));
-            
+
 done:
     FUNC_LEAVE_NOAPI(ret_value)
 } /* H5C__trace_write_log_message() */
@@ -217,7 +217,7 @@ H5C_log_trace_set_up(H5C_log_info_t *log_info, const char log_location[], int mp
     if(NULL == (log_info->udata = H5MM_calloc(sizeof(H5C_log_trace_udata_t))))
         HGOTO_ERROR(H5E_CACHE, H5E_CANTALLOC, FAIL, "memory allocation failed")
     trace_udata = (H5C_log_trace_udata_t *)(log_info->udata);
-    
+
     /* Allocate memory for the message buffer */
     if(NULL == (trace_udata->message = (char *)H5MM_calloc(H5C_MAX_TRACE_LOG_MSG_SIZE * sizeof(char))))
         HGOTO_ERROR(H5E_CACHE, H5E_CANTALLOC, FAIL, "memory allocation failed")
@@ -340,7 +340,7 @@ H5C__trace_write_expunge_entry_log_msg(void *udata, haddr_t address,
     HDassert(trace_udata->message);
 
     /* Create the log message string */
-    HDsnprintf(trace_udata->message, H5C_MAX_TRACE_LOG_MSG_SIZE, "H5AC_expunge_entry 0x%lx %d %d\n", 
+    HDsnprintf(trace_udata->message, H5C_MAX_TRACE_LOG_MSG_SIZE, "H5AC_expunge_entry 0x%lx %d %d\n",
             (unsigned long)address, type_id, (int)fxn_ret_value);
 
     /* Write the log message to the file */
@@ -377,7 +377,7 @@ H5C__trace_write_flush_cache_log_msg(void *udata, herr_t fxn_ret_value)
     HDassert(trace_udata->message);
 
     /* Create the log message string */
-    HDsnprintf(trace_udata->message, H5C_MAX_TRACE_LOG_MSG_SIZE, "H5AC_flush %d\n", 
+    HDsnprintf(trace_udata->message, H5C_MAX_TRACE_LOG_MSG_SIZE, "H5AC_flush %d\n",
             (int)fxn_ret_value);
 
     /* Write the log message to the file */
@@ -415,7 +415,7 @@ H5C__trace_write_insert_entry_log_msg(void *udata, haddr_t address,
     HDassert(trace_udata->message);
 
     /* Create the log message string */
-    HDsnprintf(trace_udata->message, H5C_MAX_TRACE_LOG_MSG_SIZE, "H5AC_insert_entry 0x%lx %d 0x%x %d %d\n", 
+    HDsnprintf(trace_udata->message, H5C_MAX_TRACE_LOG_MSG_SIZE, "H5AC_insert_entry 0x%lx %d 0x%x %d %d\n",
             (unsigned long)address, type_id, flags, (int)size, (int)fxn_ret_value);
 
     /* Write the log message to the file */
@@ -454,7 +454,7 @@ H5C__trace_write_mark_entry_dirty_log_msg(void *udata, const H5C_cache_entry_t *
     HDassert(entry);
 
     /* Create the log message string */
-    HDsnprintf(trace_udata->message, H5C_MAX_TRACE_LOG_MSG_SIZE, "H5AC_mark_entry_dirty 0x%lx %d\n", 
+    HDsnprintf(trace_udata->message, H5C_MAX_TRACE_LOG_MSG_SIZE, "H5AC_mark_entry_dirty 0x%lx %d\n",
             (unsigned long)(entry->addr), (int)fxn_ret_value);
 
     /* Write the log message to the file */
@@ -493,7 +493,7 @@ H5C__trace_write_mark_entry_clean_log_msg(void *udata, const H5C_cache_entry_t *
     HDassert(entry);
 
     /* Create the log message string */
-    HDsnprintf(trace_udata->message, H5C_MAX_TRACE_LOG_MSG_SIZE, "H5AC_mark_entry_clean 0x%lx %d\n", 
+    HDsnprintf(trace_udata->message, H5C_MAX_TRACE_LOG_MSG_SIZE, "H5AC_mark_entry_clean 0x%lx %d\n",
             (unsigned long)(entry->addr), (int)fxn_ret_value);
 
     /* Write the log message to the file */
@@ -532,7 +532,7 @@ H5C__trace_write_mark_unserialized_entry_log_msg(void *udata,
     HDassert(entry);
 
     /* Create the log message string */
-    HDsnprintf(trace_udata->message, H5C_MAX_TRACE_LOG_MSG_SIZE, "H5AC_mark_entry_unserialized 0x%lx %d\n", 
+    HDsnprintf(trace_udata->message, H5C_MAX_TRACE_LOG_MSG_SIZE, "H5AC_mark_entry_unserialized 0x%lx %d\n",
             (unsigned long)(entry->addr), (int)fxn_ret_value);
 
     /* Write the log message to the file */
@@ -571,7 +571,7 @@ H5C__trace_write_mark_serialized_entry_log_msg(void *udata, const H5C_cache_entr
     HDassert(entry);
 
     /* Create the log message string */
-    HDsnprintf(trace_udata->message, H5C_MAX_TRACE_LOG_MSG_SIZE, "H5AC_mark_entry_serialized 0x%lx %d\n", 
+    HDsnprintf(trace_udata->message, H5C_MAX_TRACE_LOG_MSG_SIZE, "H5AC_mark_entry_serialized 0x%lx %d\n",
             (unsigned long)(entry->addr), (int)fxn_ret_value);
 
     /* Write the log message to the file */
@@ -609,7 +609,7 @@ H5C__trace_write_move_entry_log_msg(void *udata, haddr_t old_addr, haddr_t new_a
     HDassert(trace_udata->message);
 
     /* Create the log message string */
-    HDsnprintf(trace_udata->message, H5C_MAX_TRACE_LOG_MSG_SIZE, "H5AC_move_entry 0x%lx 0x%lx %d %d\n", 
+    HDsnprintf(trace_udata->message, H5C_MAX_TRACE_LOG_MSG_SIZE, "H5AC_move_entry 0x%lx 0x%lx %d %d\n",
             (unsigned long)old_addr, (unsigned long)new_addr, type_id, (int)fxn_ret_value);
 
     /* Write the log message to the file */
@@ -648,7 +648,7 @@ H5C__trace_write_pin_entry_log_msg(void *udata, const H5C_cache_entry_t *entry,
     HDassert(entry);
 
     /* Create the log message string */
-    HDsnprintf(trace_udata->message, H5C_MAX_TRACE_LOG_MSG_SIZE, "H5AC_pin_protected_entry 0x%lx %d\n", 
+    HDsnprintf(trace_udata->message, H5C_MAX_TRACE_LOG_MSG_SIZE, "H5AC_pin_protected_entry 0x%lx %d\n",
             (unsigned long)(entry->addr), (int)fxn_ret_value);
 
     /* Write the log message to the file */
@@ -689,7 +689,7 @@ H5C__trace_write_create_fd_log_msg(void *udata, const H5C_cache_entry_t *parent,
     HDassert(child);
 
     /* Create the log message string */
-    HDsnprintf(trace_udata->message, H5C_MAX_TRACE_LOG_MSG_SIZE, "H5AC_create_flush_dependency 0x%lx 0x%lx %d\n", 
+    HDsnprintf(trace_udata->message, H5C_MAX_TRACE_LOG_MSG_SIZE, "H5AC_create_flush_dependency 0x%lx 0x%lx %d\n",
             (unsigned long)(parent->addr), (unsigned long)(child->addr), (int)fxn_ret_value);
 
     /* Write the log message to the file */
@@ -728,7 +728,7 @@ H5C__trace_write_protect_entry_log_msg(void *udata, const H5C_cache_entry_t *ent
     HDassert(entry);
 
     /* Create the log message string */
-    HDsnprintf(trace_udata->message, H5C_MAX_TRACE_LOG_MSG_SIZE, "H5AC_protect 0x%lx %d 0x%x %d %d\n", 
+    HDsnprintf(trace_udata->message, H5C_MAX_TRACE_LOG_MSG_SIZE, "H5AC_protect 0x%lx %d 0x%x %d %d\n",
             (unsigned long)(entry->addr), type_id, flags, (int)(entry->size), (int)fxn_ret_value);
 
     /* Write the log message to the file */
@@ -767,7 +767,7 @@ H5C__trace_write_resize_entry_log_msg(void *udata, const H5C_cache_entry_t *entr
     HDassert(entry);
 
     /* Create the log message string */
-    HDsnprintf(trace_udata->message, H5C_MAX_TRACE_LOG_MSG_SIZE, "H5AC_resize_entry 0x%lx %d %d\n", 
+    HDsnprintf(trace_udata->message, H5C_MAX_TRACE_LOG_MSG_SIZE, "H5AC_resize_entry 0x%lx %d %d\n",
             (unsigned long)(entry->addr), (int)new_size, (int)fxn_ret_value);
 
     /* Write the log message to the file */
@@ -806,7 +806,7 @@ H5C__trace_write_unpin_entry_log_msg(void *udata, const H5C_cache_entry_t *entry
     HDassert(entry);
 
     /* Create the log message string */
-    HDsnprintf(trace_udata->message, H5C_MAX_TRACE_LOG_MSG_SIZE, "H5AC_unpin_entry 0x%lx %d\n", 
+    HDsnprintf(trace_udata->message, H5C_MAX_TRACE_LOG_MSG_SIZE, "H5AC_unpin_entry 0x%lx %d\n",
             (unsigned long)(entry->addr), (int)fxn_ret_value);
 
     /* Write the log message to the file */
@@ -847,7 +847,7 @@ H5C__trace_write_destroy_fd_log_msg(void *udata, const H5C_cache_entry_t *parent
     HDassert(child);
 
     /* Create the log message string */
-    HDsnprintf(trace_udata->message, H5C_MAX_TRACE_LOG_MSG_SIZE, "H5AC_destroy_flush_dependency 0x%lx 0x%lx %d\n", 
+    HDsnprintf(trace_udata->message, H5C_MAX_TRACE_LOG_MSG_SIZE, "H5AC_destroy_flush_dependency 0x%lx 0x%lx %d\n",
             (unsigned long)(parent->addr), (unsigned long)(child->addr), (int)fxn_ret_value);
 
     /* Write the log message to the file */
@@ -885,7 +885,7 @@ H5C__trace_write_unprotect_entry_log_msg(void *udata, haddr_t address,
     HDassert(trace_udata->message);
 
     /* Create the log message string */
-    HDsnprintf(trace_udata->message, H5C_MAX_TRACE_LOG_MSG_SIZE, "H5AC_unprotect 0x%lx %d 0x%x %d\n", 
+    HDsnprintf(trace_udata->message, H5C_MAX_TRACE_LOG_MSG_SIZE, "H5AC_unprotect 0x%lx %d 0x%x %d\n",
             (unsigned long)(address), type_id, flags, (int)fxn_ret_value);
 
     /* Write the log message to the file */
@@ -994,7 +994,7 @@ H5C__trace_write_remove_entry_log_msg(void *udata, const H5C_cache_entry_t *entr
     HDassert(entry);
 
     /* Create the log message string */
-    HDsnprintf(trace_udata->message, H5C_MAX_TRACE_LOG_MSG_SIZE, "H5AC_remove_entry 0x%lx %d\n", 
+    HDsnprintf(trace_udata->message, H5C_MAX_TRACE_LOG_MSG_SIZE, "H5AC_remove_entry 0x%lx %d\n",
             (unsigned long)(entry->addr), (int)fxn_ret_value);
 
     /* Write the log message to the file */
diff --git a/src/H5Cmpio.c b/src/H5Cmpio.c
index 2c176e4..0ac4c4f 100644
--- a/src/H5Cmpio.c
+++ b/src/H5Cmpio.c
@@ -60,7 +60,7 @@
 /* Local Prototypes */
 /********************/
 static herr_t H5C__collective_write(H5F_t *f);
-static herr_t H5C__flush_candidate_entries(H5F_t *f, unsigned entries_to_flush[H5C_RING_NTYPES], 
+static herr_t H5C__flush_candidate_entries(H5F_t *f, unsigned entries_to_flush[H5C_RING_NTYPES],
     unsigned entries_to_clear[H5C_RING_NTYPES]);
 static herr_t H5C__flush_candidates_in_ring(H5F_t *f, H5C_ring_t ring,
     unsigned  entries_to_flush, unsigned entries_to_clear);
@@ -87,20 +87,20 @@ static herr_t H5C__flush_candidates_in_ring(H5F_t *f, H5C_ring_t ring,
  *
  * Purpose:     Apply the supplied candidate list.
  *
- *		We used to do this by simply having each process write 
- *		every mpi_size-th entry in the candidate list, starting 
- *		at index mpi_rank, and mark all the others clean.  
+ *		We used to do this by simply having each process write
+ *		every mpi_size-th entry in the candidate list, starting
+ *		at index mpi_rank, and mark all the others clean.
  *
- *		However, this can cause unnecessary contention in a file 
- *		system by increasing the number of processes writing to 
+ *		However, this can cause unnecessary contention in a file
+ *		system by increasing the number of processes writing to
  *		adjacent locations in the HDF5 file.
  *
- *		To attempt to minimize this, we now arange matters such 
- *		that each process writes n adjacent entries in the 
+ *		To attempt to minimize this, we now arange matters such
+ *		that each process writes n adjacent entries in the
  *		candidate list, and marks all others clean.  We must do
- *		this in such a fashion as to guarantee that each entry 
- *		on the candidate list is written by exactly one process, 
- *		and marked clean by all others.  
+ *		this in such a fashion as to guarantee that each entry
+ *		on the candidate list is written by exactly one process,
+ *		and marked clean by all others.
  *
  *		To do this, first construct a table mapping mpi_rank
  *		to the index of the first entry in the candidate list to
@@ -110,7 +110,7 @@ static herr_t H5C__flush_candidates_in_ring(H5F_t *f, H5C_ring_t ring,
  *
  *		Note that the table must be identical on all processes, as
  *		all see the same candidate list, mpi_size, and mpi_rank --
- *		the inputs used to construct the table.  
+ *		the inputs used to construct the table.
  *
  *		We construct the table as follows.  Let:
  *
@@ -118,18 +118,18 @@ static herr_t H5C__flush_candidates_in_ring(H5F_t *f, H5C_ring_t ring,
  *
  *			m = num_candidates % mpi_size;
  *
- *		Now allocate an array of integers of length mpi_size + 1, 
- *		and call this array candidate_assignment_table. 
+ *		Now allocate an array of integers of length mpi_size + 1,
+ *		and call this array candidate_assignment_table.
  *
  *		Conceptually, if the number of candidates is a multiple
  *		of the mpi_size, we simply pass through the candidate list
- *		and assign n entries to each process to flush, with the 
- *		index of the first entry to flush in the location in 
+ *		and assign n entries to each process to flush, with the
+ *		index of the first entry to flush in the location in
  *		the candidate_assignment_table indicated by the mpi_rank
- *		of the process.  
+ *		of the process.
  *
- *		In the more common case in which the candidate list isn't 
- *		isn't a multiple of the mpi_size, we pretend it is, and 
+ *		In the more common case in which the candidate list isn't
+ *		isn't a multiple of the mpi_size, we pretend it is, and
  *		give num_candidates % mpi_size processes one extra entry
  *		each to make things work out.
  *
@@ -138,22 +138,22 @@ static herr_t H5C__flush_candidates_in_ring(H5F_t *f, H5C_ring_t ring,
  *
  *	 	first_entry_to_flush = candidate_assignment_table[mpi_rank]
  *
- *		last_entry_to_flush = 
+ *		last_entry_to_flush =
  *			candidate_assignment_table[mpi_rank + 1] - 1;
- *		
- *		With these values determined, we simply scan through the 
- *		candidate list, marking all entries in the range 
+ *
+ *		With these values determined, we simply scan through the
+ *		candidate list, marking all entries in the range
  *		[first_entry_to_flush, last_entry_to_flush] for flush,
  *		and all others to be cleaned.
  *
- *		Finally, we scan the LRU from tail to head, flushing 
+ *		Finally, we scan the LRU from tail to head, flushing
  *		or marking clean the candidate entries as indicated.
  *		If necessary, we scan the pinned list as well.
  *
- *		Note that this function will fail if any protected or 
+ *		Note that this function will fail if any protected or
  *		clean entries appear on the candidate list.
  *
- *		This function is used in managing sync points, and 
+ *		This function is used in managing sync points, and
  *		shouldn't be used elsewhere.
  *
  * Return:      Success:        SUCCEED
@@ -246,7 +246,7 @@ H5C_apply_candidate_list(H5F_t * f,
         for(i = 1; i < mpi_size; i++)
             candidate_assignment_table[i] = candidate_assignment_table[i - 1] + n;
     } /* end if */
-    else { 
+    else {
         for(i = 1; i <= m; i++)
             candidate_assignment_table[i] = candidate_assignment_table[i - 1] + n + 1;
 
@@ -287,7 +287,7 @@ H5C_apply_candidate_list(H5F_t * f,
     HDsprintf(&(tbl_buf[HDstrlen(tbl_buf)]), "\n");
     HDfprintf(stdout, "%s", tbl_buf);
 
-    HDfprintf(stdout, "%s:%d: flush entries [%u, %u].\n", 
+    HDfprintf(stdout, "%s:%d: flush entries [%u, %u].\n",
               FUNC, mpi_rank, first_entry_to_flush, last_entry_to_flush);
 
     HDfprintf(stdout, "%s:%d: marking entries.\n", FUNC, mpi_rank);
@@ -316,7 +316,7 @@ H5C_apply_candidate_list(H5F_t * f,
         if(entry_ptr->is_protected)
             /* For now at least, we can't deal with protected entries.
              * If we encounter one, scream and die.  If it becomes an
-             * issue, we should be able to work around this. 
+             * issue, we should be able to work around this.
              */
             HGOTO_ERROR(H5E_CACHE, H5E_SYSTEM, FAIL, "Listed entry is protected?!?!?")
 
@@ -328,9 +328,9 @@ H5C_apply_candidate_list(H5F_t * f,
         HDassert(!entry_ptr->clear_on_unprotect);
 
         /* Determine whether the entry is to be cleared or flushed,
-         * and mark it accordingly.  We will scan the protected and 
+         * and mark it accordingly.  We will scan the protected and
          * pinned list shortly, and clear or flush according to these
-         * markings.  
+         * markings.
          */
         if(u >= first_entry_to_flush && u <= last_entry_to_flush) {
             total_entries_to_flush++;
@@ -347,7 +347,7 @@ H5C_apply_candidate_list(H5F_t * f,
          * candidate list to clear from the cache have to be
          * removed from the coll list. This is OK since the
          * candidate list is collective and uniform across all
-         * ranks. 
+         * ranks.
          */
         if(entry_ptr->coll_access) {
             entry_ptr->coll_access = FALSE;
@@ -368,14 +368,14 @@ H5C_apply_candidate_list(H5F_t * f,
 #endif /* H5C_DO_SANITY_CHECKS */
 
 #if H5C_APPLY_CANDIDATE_LIST__DEBUG
-    HDfprintf(stdout, "%s:%d: num candidates/to clear/to flush = %u/%u/%u.\n", 
+    HDfprintf(stdout, "%s:%d: num candidates/to clear/to flush = %u/%u/%u.\n",
               FUNC, mpi_rank, num_candidates, total_entries_to_clear,
               total_entries_to_flush);
 #endif /* H5C_APPLY_CANDIDATE_LIST__DEBUG */
 
-    /* We have now marked all the entries on the candidate list for 
+    /* We have now marked all the entries on the candidate list for
      * either flush or clear -- now scan the LRU and the pinned list
-     * for these entries and do the deed.  Do this via a call to 
+     * for these entries and do the deed.  Do this via a call to
      * H5C__flush_candidate_entries().
      *
      * Note that we are doing things in this round about manner so as
@@ -412,10 +412,10 @@ done:
 /*-------------------------------------------------------------------------
  * Function:    H5C_construct_candidate_list__clean_cache
  *
- * Purpose:     Construct the list of entries that should be flushed to 
+ * Purpose:     Construct the list of entries that should be flushed to
  *		clean all entries in the cache.
  *
- *		This function is used in managing sync points, and 
+ *		This function is used in managing sync points, and
  *		shouldn't be used elsewhere.
  *
  * Return:      Success:        SUCCEED
@@ -448,9 +448,9 @@ H5C_construct_candidate_list__clean_cache(H5C_t * cache_ptr)
      * point, it is possible that some dirty entries may reside on the
      * pinned list at this point.
      */
-    HDassert( cache_ptr->slist_size <= 
+    HDassert( cache_ptr->slist_size <=
               (cache_ptr->dLRU_list_size + cache_ptr->pel_size) );
-    HDassert( cache_ptr->slist_len  <= 
+    HDassert( cache_ptr->slist_len  <=
               (cache_ptr->dLRU_list_len + cache_ptr->pel_len) );
 
     if(space_needed > 0) { /* we have work to do */
@@ -462,7 +462,7 @@ H5C_construct_candidate_list__clean_cache(H5C_t * cache_ptr)
         HDassert( cache_ptr->slist_len > 0 );
 
         /* Scan the dirty LRU list from tail forward and nominate sufficient
-         * entries to free up the necessary space. 
+         * entries to free up the necessary space.
          */
         entry_ptr = cache_ptr->dLRU_tail_ptr;
         while((nominated_entries_size < space_needed) &&
@@ -484,7 +484,7 @@ H5C_construct_candidate_list__clean_cache(H5C_t * cache_ptr)
         } /* end while */
         HDassert( entry_ptr == NULL );
 
-        /* it is possible that there are some dirty entries on the 
+        /* it is possible that there are some dirty entries on the
          * protected entry list as well -- scan it too if necessary
          */
         entry_ptr = cache_ptr->pel_head_ptr;
@@ -521,10 +521,10 @@ done:
 /*-------------------------------------------------------------------------
  * Function:    H5C_construct_candidate_list__min_clean
  *
- * Purpose:     Construct the list of entries that should be flushed to 
+ * Purpose:     Construct the list of entries that should be flushed to
  *		get the cache back within its min clean constraints.
  *
- *		This function is used in managing sync points, and 
+ *		This function is used in managing sync points, and
  *		shouldn't be used elsewhere.
  *
  * Return:      Success:        SUCCEED
@@ -547,7 +547,7 @@ H5C_construct_candidate_list__min_clean(H5C_t * cache_ptr)
     HDassert( cache_ptr != NULL );
     HDassert( cache_ptr->magic == H5C__H5C_T_MAGIC );
 
-    /* compute the number of bytes (if any) that must be flushed to get the 
+    /* compute the number of bytes (if any) that must be flushed to get the
      * cache back within its min clean constraints.
      */
     if(cache_ptr->max_cache_size > cache_ptr->index_size) {
@@ -575,7 +575,7 @@ H5C_construct_candidate_list__min_clean(H5C_t * cache_ptr)
         HDassert( cache_ptr->slist_len > 0 );
 
         /* Scan the dirty LRU list from tail forward and nominate sufficient
-         * entries to free up the necessary space. 
+         * entries to free up the necessary space.
          */
         entry_ptr = cache_ptr->dLRU_tail_ptr;
         while((nominated_entries_size < space_needed) &&
@@ -751,23 +751,23 @@ H5C_mark_entries_as_clean(H5F_t *  f,
      * any protected entries will not be on the LRU, and therefore
      * will not be flushed at this time.
      *
-     * Note that unlike H5C_apply_candidate_list(), 
-     * H5C_mark_entries_as_clean() makes all its calls to 
-     * H5C__flush_single_entry() with the H5C__FLUSH_CLEAR_ONLY_FLAG 
-     * set.  As a result, the pre_serialize() and serialize calls are 
+     * Note that unlike H5C_apply_candidate_list(),
+     * H5C_mark_entries_as_clean() makes all its calls to
+     * H5C__flush_single_entry() with the H5C__FLUSH_CLEAR_ONLY_FLAG
+     * set.  As a result, the pre_serialize() and serialize calls are
      * not made.
      *
-     * This then implies that (assuming such actions were 
-     * permitted in the parallel case) no loads, dirties, 
-     * resizes, or removals of other entries can occur as 
+     * This then implies that (assuming such actions were
+     * permitted in the parallel case) no loads, dirties,
+     * resizes, or removals of other entries can occur as
      * a side effect of the flush.  Hence, there is no need
-     * for the checks for entry removal / status change 
+     * for the checks for entry removal / status change
      * that I ported to H5C_apply_candidate_list().
      *
      * However, if (in addition to allowing such operations
      * in the parallel case), we allow such operations outside
-     * of the pre_serialize / serialize routines, this may 
-     * cease to be the case -- requiring a review of this 
+     * of the pre_serialize / serialize routines, this may
+     * cease to be the case -- requiring a review of this
      * point.
      *					JRM -- 4/7/15
      */
@@ -813,7 +813,7 @@ H5C_mark_entries_as_clean(H5F_t *  f,
                 pinned_entries_cleared++;
                 progress = TRUE;
 
-                if(H5C__flush_single_entry(f, clear_ptr, 
+                if(H5C__flush_single_entry(f, clear_ptr,
                         (H5C__FLUSH_CLEAR_ONLY_FLAG | H5C__GENERATE_IMAGE_FLAG | H5C__UPDATE_PAGE_BUFFER_FLAG)) < 0)
                     HGOTO_ERROR(H5E_CACHE, H5E_CANTFLUSH, FAIL, "can't clear entry")
             } /* end if */
@@ -860,7 +860,7 @@ done:
  *
  * Function:    H5C_clear_coll_entries
  *
- * Purpose:     Clear half or the entire list of collective entries and 
+ * Purpose:     Clear half or the entire list of collective entries and
  *              mark them as independent.
  *
  * Return:      FAIL if error is detected, SUCCEED otherwise.
@@ -872,7 +872,7 @@ done:
  */
 herr_t
 H5C_clear_coll_entries(H5C_t *cache_ptr, hbool_t partial)
-{ 
+{
     uint32_t		clear_cnt;
     H5C_cache_entry_t *	entry_ptr = NULL;
     herr_t              ret_value = SUCCEED;
@@ -1042,8 +1042,8 @@ H5C__collective_write(H5F_t *f)
 
         info = *info_p;
 
-        /* just to match up with the 1st MPI_File_set_view from 
-         * H5FD_mpio_write() 
+        /* just to match up with the 1st MPI_File_set_view from
+         * H5FD_mpio_write()
          */
         if(MPI_SUCCESS != (mpi_code = MPI_File_set_view(mpi_fh, (MPI_Offset)0, MPI_BYTE, MPI_BYTE, "native", info)))
             HMPI_GOTO_ERROR(FAIL, "MPI_File_set_view failed", mpi_code)
@@ -1053,8 +1053,8 @@ H5C__collective_write(H5F_t *f)
         if(MPI_SUCCESS != (mpi_code = MPI_File_write_at_all(mpi_fh, (MPI_Offset)0, NULL, 0, MPI_BYTE, &mpi_stat)))
             HMPI_GOTO_ERROR(FAIL, "MPI_File_write_at_all failed", mpi_code)
 
-        /* just to match up with the 2nd MPI_File_set_view (reset) in 
-         * H5FD_mpio_write() 
+        /* just to match up with the 2nd MPI_File_set_view (reset) in
+         * H5FD_mpio_write()
          */
         if(MPI_SUCCESS != (mpi_code = MPI_File_set_view(mpi_fh, (MPI_Offset)0, MPI_BYTE, MPI_BYTE, "native", info)))
             HMPI_GOTO_ERROR(FAIL, "MPI_File_set_view failed", mpi_code)
diff --git a/src/H5Cpkg.h b/src/H5Cpkg.h
index 6608bc2..8712af5 100644
--- a/src/H5Cpkg.h
+++ b/src/H5Cpkg.h
@@ -149,8 +149,8 @@
  *
  *							JRM - 9/8/05
  *
- *  - Added macros supporting the index list -- a doubly liked list of 
- *    all entries in the index.  This list is necessary to reduce the 
+ *  - Added macros supporting the index list -- a doubly liked list of
+ *    all entries in the index.  This list is necessary to reduce the
  *    cost of visiting all entries in the cache, which was previously
  *    done via a scan of the hash table.
  *
@@ -963,16 +963,16 @@ if ( ( ( ( (head_ptr) == NULL ) || ( (tail_ptr) == NULL ) ) &&             \
  *
  *     						JRM -- 11/5/08
  *
- *   - Updated existing index macros and sanity check macros to maintain 
+ *   - Updated existing index macros and sanity check macros to maintain
  *     the index_ring_len, index_ring_size, clean_index_ring_size, and
  *     dirty_index_ring_size fields of H5C_t.
  *
  *						JRM -- 9/1/15
  *
- *   - Updated existing index macros and sanity checks macros to 
+ *   - Updated existing index macros and sanity checks macros to
  *     maintain an doubly linked list of all entries in the index.
  *     This is necessary to reduce the computational cost of visiting
- *     all entries in the index, which used to be done by scanning 
+ *     all entries in the index, which used to be done by scanning
  *     the hash table.
  *
  *                                              JRM -- 10/15/15
@@ -1561,7 +1561,7 @@ if ( ( (cache_ptr)->index_size !=                                           \
  *		flush.
  *
  *		JRM -- 12/13/14
- *		Added code to set cache_ptr->slist_changed to TRUE 
+ *		Added code to set cache_ptr->slist_changed to TRUE
  *		when an entry is inserted in the slist.
  *
  *		JRM -- 9/1/15
@@ -1762,7 +1762,7 @@ if ( ( (cache_ptr)->index_size !=                                           \
  *		flush.
  *
  *		JRM -- 12/13/14
- *		Note that we do not set cache_ptr->slist_changed to TRUE 
+ *		Note that we do not set cache_ptr->slist_changed to TRUE
  *		in this case, as the structure of the slist is not
  *		modified.
  *
@@ -2243,14 +2243,14 @@ if ( ( (cache_ptr)->index_size !=                                           \
  * Macro:	H5C__UPDATE_RP_FOR_INSERT_APPEND
  *
  * Purpose:     Update the replacement policy data structures for an
- *		insertion of the specified cache entry.  
+ *		insertion of the specified cache entry.
  *
- *		Unlike H5C__UPDATE_RP_FOR_INSERTION below, mark the 
- *		new entry as the LEAST recently used entry, not the 
- *		most recently used.  
+ *		Unlike H5C__UPDATE_RP_FOR_INSERTION below, mark the
+ *		new entry as the LEAST recently used entry, not the
+ *		most recently used.
  *
- *		For now at least, this macro should only be used in 
- *		the reconstruction of the metadata cache from a cache 
+ *		For now at least, this macro should only be used in
+ *		the reconstruction of the metadata cache from a cache
  *		image block.
  *
  *		At present, we only support the modified LRU policy, so
@@ -3491,7 +3491,7 @@ typedef struct H5C_tag_info_t {
  *
  *						JRM - 9/26/05
  *
- * magic:	Unsigned 32 bit integer always set to H5C__H5C_T_MAGIC. 
+ * magic:	Unsigned 32 bit integer always set to H5C__H5C_T_MAGIC.
  * 		This field is used to validate pointers to instances of
  * 		H5C_t.
  *
@@ -3544,7 +3544,7 @@ typedef struct H5C_tag_info_t {
  *              clean data so as to avoid case b) above.  Again, this is
  *              a soft limit.
  *
- * close_warning_received: Boolean flag indicating that a file closing 
+ * close_warning_received: Boolean flag indicating that a file closing
  *		warning has been received.
  *
  *
@@ -3576,7 +3576,7 @@ typedef struct H5C_tag_info_t {
  * 		this flag is set to FALSE, the metadata cache will not
  * 		attempt to evict entries to make space for newly protected
  * 		entries, and instead the will grow without limit.
- * 		
+ *
  * 		Needless to say, this feature must be used with care.
  *
  *
@@ -3586,12 +3586,12 @@ typedef struct H5C_tag_info_t {
  * Addendum:  JRM -- 10/14/15
  *
  * We sometimes need to visit all entries in the cache.  In the past, this
- * was done by scanning the hash table.  However, this is expensive, and 
- * we have come to scan the hash table often enough that it has become a 
- * performance issue.  To repair this, I have added code to maintain a 
- * list of all entries in the index -- call this list the index list.  
+ * was done by scanning the hash table.  However, this is expensive, and
+ * we have come to scan the hash table often enough that it has become a
+ * performance issue.  To repair this, I have added code to maintain a
+ * list of all entries in the index -- call this list the index list.
  *
- * The index list is maintained by the same macros that maintain the 
+ * The index list is maintained by the same macros that maintain the
  * index, and must have the same length and size as the index proper.
  *
  * index_len:   Number of entries currently in the hash table used to index
@@ -3606,12 +3606,12 @@ typedef struct H5C_tag_info_t {
  *              index_size by three should yield a conservative estimate
  *              of the cache's memory footprint.
  *
- * index_ring_len: Array of integer of length H5C_RING_NTYPES used to 
- *		maintain a count of entries in the index by ring.  Note 
- *		that the sum of all the cells in this array must equal 
+ * index_ring_len: Array of integer of length H5C_RING_NTYPES used to
+ *		maintain a count of entries in the index by ring.  Note
+ *		that the sum of all the cells in this array must equal
  *		the value stored in index_len above.
  *
- * index_ring_size: Array of size_t of length H5C_RING_NTYPES used to 
+ * index_ring_size: Array of size_t of length H5C_RING_NTYPES used to
  *		maintain the sum of the sizes of all entries in the index
  *		by ring.  Note that the sum of all cells in this array must
  *		equal the value stored in index_size above.
@@ -3631,8 +3631,8 @@ typedef struct H5C_tag_info_t {
  *                 in the cache.
  *
  * clean_index_ring_size: Array of size_t of length H5C_RING_NTYPES used to
- *		maintain the sum of the sizes of all clean entries in the 
- *		index by ring.  Note that the sum of all cells in this array 
+ *		maintain the sum of the sizes of all clean entries in the
+ *		index by ring.  Note that the sum of all cells in this array
  *		must equal the value stored in clean_index_size above.
  *
  * dirty_index_size: Number of bytes of dirty entries currently stored in
@@ -3642,8 +3642,8 @@ typedef struct H5C_tag_info_t {
  *		dirty_index_size == index_size.
  *
  * dirty_index_ring_size: Array of size_t of length H5C_RING_NTYPES used to
- *		maintain the sum of the sizes of all dirty entries in the 
- *		index by ring.  Note that the sum of all cells in this array 
+ *		maintain the sum of the sizes of all dirty entries in the
+ *		index by ring.  Note that the sum of all cells in this array
  *		must equal the value stored in dirty_index_size above.
  *
  * index:	Array of pointer to H5C_cache_entry_t of size
@@ -3661,52 +3661,52 @@ typedef struct H5C_tag_info_t {
  *		changing the H5C__HASH_FCN macro and the deletion of the
  *		H5C__HASH_MASK #define.  No other changes should be required.
  *
- * il_len:	Number of entries on the index list.  
+ * il_len:	Number of entries on the index list.
  *
- *		This must always be equal to index_len.  As such, this 
- *		field is redundant.  However, the existing linked list 
- *		management macros expect to maintain a length field, so 
+ *		This must always be equal to index_len.  As such, this
+ *		field is redundant.  However, the existing linked list
+ *		management macros expect to maintain a length field, so
  *		this field exists primarily to avoid adding complexity to
  *		these macros.
  *
  * il_size: 	Number of bytes of cache entries currently stored in the
  *		index list.
  *
- *		This must always be equal to index_size.  As such, this 
- *		field is redundant.  However, the existing linked list 
- *		management macros expect to maintain a size field, so 
+ *		This must always be equal to index_size.  As such, this
+ *		field is redundant.  However, the existing linked list
+ *		management macros expect to maintain a size field, so
  *		this field exists primarily to avoid adding complexity to
  *		these macros.
  *
  * il_head:	Pointer to the head of the doubly linked list of entries in
- *              the index list.  Note that cache entries on this list are 
+ *              the index list.  Note that cache entries on this list are
  *		linked by their il_next and il_prev fields.
  *
  *              This field is NULL if the index is empty.
  *
  * il_tail:	Pointer to the tail of the doubly linked list of entries in
- *              the index list.  Note that cache entries on this list are 
+ *              the index list.  Note that cache entries on this list are
  *              linked by their il_next and il_prev fields.
  *
  *              This field is NULL if the index is empty.
  *
  *
- * With the addition of the take ownership flag, it is possible that 
- * an entry may be removed from the cache as the result of the flush of 
- * a second entry.  In general, this causes little trouble, but it is 
- * possible that the entry removed may be the next entry in the scan of 
- * a list.  In this case, we must be able to detect the fact that the 
+ * With the addition of the take ownership flag, it is possible that
+ * an entry may be removed from the cache as the result of the flush of
+ * a second entry.  In general, this causes little trouble, but it is
+ * possible that the entry removed may be the next entry in the scan of
+ * a list.  In this case, we must be able to detect the fact that the
  * entry has been removed, so that the scan doesn't attempt to proceed with
  * an entry that is no longer in the cache.
  *
  * The following fields are maintained to facilitate this.
  *
  * entries_removed_counter:	Counter that is incremented each time an
- *		entry is removed from the cache by any means (eviction, 
+ *		entry is removed from the cache by any means (eviction,
  *		expungement, or take ownership at this point in time).
  *		Functions that perform scans on lists may set this field
- *		to zero prior to calling H5C__flush_single_entry().  
- *		Unexpected changes to the counter indicate that an entry 
+ *		to zero prior to calling H5C__flush_single_entry().
+ *		Unexpected changes to the counter indicate that an entry
  *		was removed from the cache as a side effect of the flush.
  *
  * last_entry_removed_ptr:	Pointer to the instance of H5C_cache_entry_t
@@ -3715,11 +3715,11 @@ typedef struct H5C_tag_info_t {
  *		performing a scan of a list has set this field to NULL prior
  *		to calling H5C__flush_single_entry().
  *
- *		WARNING!!! This field must NEVER be dereferenced.  It is 
+ *		WARNING!!! This field must NEVER be dereferenced.  It is
  *		maintained to allow functions that perform scans of lists
  *		to compare this pointer with their pointers to next, thus
  *		allowing them to avoid unnecessary restarts of scans if the
- *		pointers don't match, and if entries_removed_counter is 
+ *		pointers don't match, and if entries_removed_counter is
  *		one.
  *
  * entry_watched_for_removal:	Pointer to an instance of H5C_cache_entry_t
@@ -3740,11 +3740,11 @@ typedef struct H5C_tag_info_t {
  * are flushed. (this has been changed -- dirty entries are now removed from
  * the skip list as they are flushed.  JRM - 10/25/05)
  *
- * slist_changed: Boolean flag used to indicate whether the contents of 
+ * slist_changed: Boolean flag used to indicate whether the contents of
  *		the slist has changed since the last time this flag was
- *		reset.  This is used in the cache flush code to detect 
+ *		reset.  This is used in the cache flush code to detect
  *		conditions in which pre-serialize or serialize callbacks
- *		have modified the slist -- which obliges us to restart 
+ *		have modified the slist -- which obliges us to restart
  *		the scan of the slist from the beginning.
  *
  * slist_len:   Number of entries currently in the skip list
@@ -3755,14 +3755,14 @@ typedef struct H5C_tag_info_t {
  *              skip list used to maintain a sorted list of
  *              dirty entries in the cache.
  *
- * slist_ring_len: Array of integer of length H5C_RING_NTYPES used to 
- *		maintain a count of entries in the slist by ring.  Note 
- *		that the sum of all the cells in this array must equal 
+ * slist_ring_len: Array of integer of length H5C_RING_NTYPES used to
+ *		maintain a count of entries in the slist by ring.  Note
+ *		that the sum of all the cells in this array must equal
  *		the value stored in slist_len above.
  *
  * slist_ring_size: Array of size_t of length H5C_RING_NTYPES used to
- *              maintain the sum of the sizes of all entries in the 
- *		slist by ring.  Note that the sum of all cells in this 
+ *              maintain the sum of the sizes of all entries in the
+ *		slist by ring.  Note that the sum of all cells in this
  *		array must equal the value stored in slist_size above.
  *
  * slist_ptr:   pointer to the instance of H5SL_t used maintain a sorted
@@ -3826,7 +3826,7 @@ typedef struct H5C_tag_info_t {
  * num_objs_corked: Unsigned integer field containing the number of objects
  *                  that are "corked".  The "corked" status of an object is
  *                  found by searching the "tag_list".  This field is added
- *                  for optimization so that the skip list search on "tag_list" 
+ *                  for optimization so that the skip list search on "tag_list"
  *                  can be skipped if this field is zero, i.e. no "corked"
  *                  objects.
  *
@@ -3867,7 +3867,7 @@ typedef struct H5C_tag_info_t {
  *
  *      2) A pinned entry can be accessed or modified at any time.
  *         This places an additional burden on the associated pre-serialize
- *	   and serialize callbacks, which must ensure the the entry is in 
+ *	   and serialize callbacks, which must ensure the the entry is in
  *	   a consistent state before creating an image of it.
  *
  *      3) A pinned entry can be marked as dirty (and possibly
@@ -3878,7 +3878,7 @@ typedef struct H5C_tag_info_t {
  *         flush.
  *
  * Since pinned entries cannot be evicted, they must be kept on a pinned
- * entry list (pel), instead of being entrusted to the replacement policy 
+ * entry list (pel), instead of being entrusted to the replacement policy
  * code.
  *
  * Maintaining the pinned entry list requires the following fields:
@@ -3907,7 +3907,7 @@ typedef struct H5C_tag_info_t {
  *
  * While there has been interest in several replacement policies for
  * this cache, the initial development schedule is tight.  Thus I have
- * elected to support only a modified LRU (least recently used) policy 
+ * elected to support only a modified LRU (least recently used) policy
  * for the first cut.
  *
  * To further simplify matters, I have simply included the fields needed
@@ -3926,7 +3926,7 @@ typedef struct H5C_tag_info_t {
  * be collective and the other processes will not know to participate.
  *
  * To deal with this issue, I have modified the usual LRU policy by adding
- * clean and dirty LRU lists to the usual LRU list.  In general, these 
+ * clean and dirty LRU lists to the usual LRU list.  In general, these
  * lists are only exist in parallel builds.
  *
  * The clean LRU list is simply the regular LRU list with all dirty cache
@@ -3954,13 +3954,13 @@ typedef struct H5C_tag_info_t {
  *
  * LRU_list_len:  Number of cache entries currently on the LRU list.
  *
- *              Observe that LRU_list_len + pl_len + pel_len must always 
+ *              Observe that LRU_list_len + pl_len + pel_len must always
  *		equal index_len.
  *
  * LRU_list_size:  Number of bytes of cache entries currently residing on the
  *              LRU list.
  *
- *              Observe that LRU_list_size + pl_size + pel_size must always 
+ *              Observe that LRU_list_size + pl_size + pel_size must always
  *		equal index_size.
  *
  * LRU_head_ptr:  Pointer to the head of the doubly linked LRU list.  Cache
@@ -4071,25 +4071,25 @@ typedef struct H5C_tag_info_t {
  *		size is decreased.  The flag triggers a call to
  *		H5C__make_space_in_cache() on the next call to H5C_protect().
  *
- * resize_in_progress: As the metadata cache has become re-entrant, it is 
- *		possible that a protect may trigger a call to 
+ * resize_in_progress: As the metadata cache has become re-entrant, it is
+ *		possible that a protect may trigger a call to
  *		H5C__auto_adjust_cache_size(), which may trigger a flush,
- *		which may trigger a protect, which will result in another 
- *		call to H5C__auto_adjust_cache_size().  
+ *		which may trigger a protect, which will result in another
+ *		call to H5C__auto_adjust_cache_size().
  *
  *		The resize_in_progress boolean flag is used to detect this,
  *		and to prevent the infinite recursion that would otherwise
  *		occur.
  *
- *		Note that this issue is not hypothetical -- this field 
- *		was added 12/29/15 to fix a bug exposed in the testing 
+ *		Note that this issue is not hypothetical -- this field
+ *		was added 12/29/15 to fix a bug exposed in the testing
  *		of changes to the file driver info superblock extension
  *		management code needed to support rings.
  *
  * msic_in_progress: As the metadata cache has become re-entrant, and as
- *              the free space manager code has become more tightly 
- *              integrated with the metadata cache, it is possible that 
- *              a call to H5C_insert_entry() may trigger a call to 
+ *              the free space manager code has become more tightly
+ *              integrated with the metadata cache, it is possible that
+ *              a call to H5C_insert_entry() may trigger a call to
  *              H5C_make_space_in_cache(), which, via H5C__flush_single_entry()
  *              and client callbacks, may trigger an infinite regression
  *              of calls to H5C_make_space_in_cache().
@@ -4098,9 +4098,9 @@ typedef struct H5C_tag_info_t {
  *              and prevent the infinite regression that would otherwise
  *              occur.
  *
- *              Note that this is issue is not hypothetical -- this field 
- *              was added 2/16/17 to address this issue when it was 
- *              exposed by modifications to test/fheap.c to cause it to 
+ *              Note that this is issue is not hypothetical -- this field
+ *              was added 2/16/17 to address this issue when it was
+ *              exposed by modifications to test/fheap.c to cause it to
  *              use paged allocation.
  *
  * resize_ctl:	Instance of H5C_auto_size_ctl_t containing configuration
@@ -4184,45 +4184,45 @@ typedef struct H5C_tag_info_t {
  * 		data for generation of a cache image on file close.
  *
  * serialization_in_progress:  Boolean field that is set to TRUE iff
- *		the cache is in the process of being serialized.  This 
+ *		the cache is in the process of being serialized.  This
  *		field is needed to support the H5C_serialization_in_progress()
  *		call, which is in turn required for sanity checks in some
  *		cache clients.
  *
- * load_image:	Boolean flag indicating that the metadata cache image 
- *		superblock extension message exists and should be 
+ * load_image:	Boolean flag indicating that the metadata cache image
+ *		superblock extension message exists and should be
  *		read, and the image block read and decoded on the next
- *		call to H5C_protect().  
+ *		call to H5C_protect().
  *
- * image_loaded:  Boolean flag indicating that the metadata cache has 
- *              loaded the metadata cache image as directed by the 
+ * image_loaded:  Boolean flag indicating that the metadata cache has
+ *              loaded the metadata cache image as directed by the
  *              MDC cache image superblock extension message.
  *
  * delete_image: Boolean flag indicating whether the metadata cache image
  *		superblock message should be deleted and the cache image
  *		file space freed after they have been read and decoded.
  *
- *		This flag should be set to TRUE iff the file is opened 
+ *		This flag should be set to TRUE iff the file is opened
  *		R/W and there is a cache image to be read.
  *
- * image_addr:  haddr_t containing the base address of the on disk 
- *		metadata cache image, or HADDR_UNDEF if that value is 
- *		undefined.  Note that this field is used both in the 
- *		construction and write, and the read and decode of 
+ * image_addr:  haddr_t containing the base address of the on disk
+ *		metadata cache image, or HADDR_UNDEF if that value is
+ *		undefined.  Note that this field is used both in the
+ *		construction and write, and the read and decode of
  *		metadata cache image blocks.
  *
- * image_len:	hsize_t containing the size of the on disk metadata cache 
- *		image, or zero if that value is undefined.  Note that this 
- *		field is used both in the construction and write, and the 
+ * image_len:	hsize_t containing the size of the on disk metadata cache
+ *		image, or zero if that value is undefined.  Note that this
+ *		field is used both in the construction and write, and the
  *		read and decode of metadata cache image blocks.
  *
- * image_data_len:  size_t containing the number of bytes of data in the 
- *		on disk metadata cache image, or zero if that value is 
+ * image_data_len:  size_t containing the number of bytes of data in the
+ *		on disk metadata cache image, or zero if that value is
  *		undefined.
  *
  *		In most cases, this value is the same as the image_len
  *		above.  It exists to allow for metadata cache image blocks
- *		that are larger than the actual image.  Thus in all 
+ *		that are larger than the actual image.  Thus in all
  *		cases image_data_len <= image_len.
  *
  * To create the metadata cache image, we must first serialize all the
@@ -4232,27 +4232,27 @@ typedef struct H5C_tag_info_t {
  * height in increasing order.
  *
  * This operation is complicated by the fact that entries other the the
- * target may be inserted, loaded, relocated, or removed from the cache 
- * (either by eviction or the take ownership flag) as the result of a 
- * pre_serialize or serialize callback.  While entry removals are not 
+ * target may be inserted, loaded, relocated, or removed from the cache
+ * (either by eviction or the take ownership flag) as the result of a
+ * pre_serialize or serialize callback.  While entry removals are not
  * a problem for the scan of the index, insertions, loads, and relocations
- * are.  Hence the entries loaded, inserted, and relocated counters 
- * listed below have been implemented to allow these conditions to be 
+ * are.  Hence the entries loaded, inserted, and relocated counters
+ * listed below have been implemented to allow these conditions to be
  * detected and dealt with by restarting the scan.
  *
- * The serialization operation is further complicated by the fact that 
- * the flush dependency height of a given entry may increase (as the 
- * result of an entry load or insert) or decrease (as the result of an 
+ * The serialization operation is further complicated by the fact that
+ * the flush dependency height of a given entry may increase (as the
+ * result of an entry load or insert) or decrease (as the result of an
  * entry removal -- via either eviction or the take ownership flag).  The
  * entry_fd_height_change_counter field is maintained to allow detection
  * of this condition, and a restart of the scan when it occurs.
  *
  * Note that all these new fields would work just as well as booleans.
  *
- * entries_loaded_counter: Number of entries loaded into the cache 
+ * entries_loaded_counter: Number of entries loaded into the cache
  *		since the last time this field was reset.
  *
- * entries_inserted_counter: Number of entries inserted into the cache 
+ * entries_inserted_counter: Number of entries inserted into the cache
  *		since the last time this field was reset.
  *
  * entries relocated_counter: Number of entries whose base address has
@@ -4261,32 +4261,32 @@ typedef struct H5C_tag_info_t {
  * entry_fd_height_change_counter: Number of entries whose flush dependency
  *		height has changed since the last time this field was reset.
  *
- * The following fields are used assemble the cache image prior to 
+ * The following fields are used assemble the cache image prior to
  * writing it to disk.
  *
  * num_entries_in_image: Unsigned integer field containing the number of entries
- *		to be copied into the metadata cache image.  Note that 
- *		this value will be less than the number of entries in 
- *		the cache, and the superblock and its related entries 
+ *		to be copied into the metadata cache image.  Note that
+ *		this value will be less than the number of entries in
+ *		the cache, and the superblock and its related entries
  *		are not written to the metadata cache image.
  *
  * image_entries: Pointer to a dynamically allocated array of instance of
  *		H5C_image_entry_t of length num_entries_in_image, or NULL
  *		if that array does not exist.  This array is used to
- *		assemble entry data to be included in the image, and to 
+ *		assemble entry data to be included in the image, and to
  *		sort them by flush dependency height and LRU rank.
- * 
+ *
  * image_buffer: Pointer to the dynamically allocated buffer of length
- *		image_len in which the metadata cache image is assembled, 
+ *		image_len in which the metadata cache image is assembled,
  *		or NULL if that	buffer does not exist.
  *
  *
  * Free Space Manager Related fields:
  *
- * The free space managers must be informed when we are about to close 
+ * The free space managers must be informed when we are about to close
  * or flush the file so that they order themselves accordingly.  This used
- * to be done much later in the close process, but with cache image and 
- * page buffering, this is no longer viable, as we must finalize the on 
+ * to be done much later in the close process, but with cache image and
+ * page buffering, this is no longer viable, as we must finalize the on
  * disk image of all metadata much sooner.
  *
  * This is handled by the H5MF_settle_raw_data_fsm() and
@@ -4300,11 +4300,11 @@ typedef struct H5C_tag_info_t {
  * flush is complete.
  *
  * rdfsm_settled:  Boolean flag indicating whether the raw data free space
- *		manager is settled -- i.e. whether the correct space has 
+ *		manager is settled -- i.e. whether the correct space has
  *		been allocated for it in the file.
  *
- *		Note that the name of this field is deceptive.  In the 
- *		multi file case, the flag applies to all free space 
+ *		Note that the name of this field is deceptive.  In the
+ *		multi file case, the flag applies to all free space
  *		managers that are not involved in allocating space for
  *		free space manager metadata.
  *
@@ -4312,9 +4312,9 @@ typedef struct H5C_tag_info_t {
  *              manager is settled -- i.e. whether the correct space has
  *              been allocated for it in the file.
  *
- *              Note that the name of this field is deceptive.  In the 
- *              multi file case, the flag applies only to free space 
- *		managers that are involved in allocating space for free 
+ *              Note that the name of this field is deceptive.  In the
+ *              multi file case, the flag applies only to free space
+ *		managers that are involved in allocating space for free
  *		space managers.
  *
  *
@@ -4358,7 +4358,7 @@ typedef struct H5C_tag_info_t {
  *		id equal to the array index has been inserted into the
  *		cache in the current epoch.
  *
- * pinned_insertions:  Array of int64 of length H5C__MAX_NUM_TYPE_IDS + 1. 
+ * pinned_insertions:  Array of int64 of length H5C__MAX_NUM_TYPE_IDS + 1.
  * 		The cells are used to record the number of times an entry
  * 		with type id equal to the array index has been inserted
  * 		pinned into the cache in the current epoch.
@@ -4378,9 +4378,9 @@ typedef struct H5C_tag_info_t {
  *		equal to the array index has been evicted from the cache in
  *		the current epoch.
  *
- * take_ownerships: Array of int64 of length H5C__MAX_NUM_TYPE_IDS + 1.  The 
- *		cells are used to record the number of times an entry with 
- *		type id equal to the array index has been removed from the 
+ * take_ownerships: Array of int64 of length H5C__MAX_NUM_TYPE_IDS + 1.  The
+ *		cells are used to record the number of times an entry with
+ *		type id equal to the array index has been removed from the
  *		cache via the H5C__TAKE_OWNERSHIP_FLAG in the current epoch.
  *
  * moves:       Array of int64 of length H5C__MAX_NUM_TYPE_IDS + 1.  The cells
@@ -4388,12 +4388,12 @@ typedef struct H5C_tag_info_t {
  *		id equal to the array index has been moved in the current
  *		epoch.
  *
- * entry_flush_moves: Array of int64 of length H5C__MAX_NUM_TYPE_IDS + 1. 
+ * entry_flush_moves: Array of int64 of length H5C__MAX_NUM_TYPE_IDS + 1.
  * 		The cells are used to record the number of times an entry
  * 		with type id equal to the array index has been moved
  * 		during its pre-serialize callback in the current epoch.
  *
- * cache_flush_moves: Array of int64 of length H5C__MAX_NUM_TYPE_IDS + 1. 
+ * cache_flush_moves: Array of int64 of length H5C__MAX_NUM_TYPE_IDS + 1.
  * 		The cells are used to record the number of times an entry
  * 		with type id equal to the array index has been moved
  * 		during a cache flush in the current epoch.
@@ -4436,7 +4436,7 @@ typedef struct H5C_tag_info_t {
  * entry_flush_size_changes:  Array of int64 of length
  * 		H5C__MAX_NUM_TYPE_IDS + 1.  The cells are used to record
  * 		the number of times an entry with type id equal to the
- * 		array index has changed size while in its pre-serialize 
+ * 		array index has changed size while in its pre-serialize
  *		callback.
  *
  * cache_flush_size_changes:  Array of int64 of length
@@ -4500,7 +4500,7 @@ typedef struct H5C_tag_info_t {
  *              enforcing the min_clean_fraction in H5C__make_space_in_cache().
  *
  * total_dirty_pf_entries_skipped_in_msic: Number of dirty prefetched entries
- *              skipped in H5C__make_space_in_cache().  Note that this can 
+ *              skipped in H5C__make_space_in_cache().  Note that this can
  *              only occur when a file is opened R/O with a cache image
  *              containing dirty entries.
  *
@@ -4512,7 +4512,7 @@ typedef struct H5C_tag_info_t {
  *
  * max_dirty_pf_entries_skipped_in_msic: Maximum number of dirty prefetched
  *              entries skipped in any one call to H5C__make_space_in_cache().
- *              Note that this can only occur when the file is opened 
+ *              Note that this can only occur when the file is opened
  *              R/O with a cache image containing dirty entries.
  *
  * max_entries_scanned_in_msic: Maximum number of entries scanned over
@@ -4522,24 +4522,24 @@ typedef struct H5C_tag_info_t {
  *              for entries to evict in order to make space in cache.
  *
  *
- * The following fields track statistics on cache images.  
+ * The following fields track statistics on cache images.
  *
  * images_created:  Integer field containing the number of cache images
- *		created since the last time statistics were reset.  
+ *		created since the last time statistics were reset.
  *
  *		At present, this field must always be either 0 or 1.
- *		Further, since cache images are only created at file 
+ *		Further, since cache images are only created at file
  *		close, this field should only be set at that time.
  *
- * images_read: Integer field containing the number of cache images 
+ * images_read: Integer field containing the number of cache images
  *              read from file.  Note that reading an image is different
  *              from loading it -- reading the image means just that,
  *              while loading the image refers to decoding it and loading
  *              it into the metadata cache.
  *
- *              In the serial case, image_read should always equal 
- *              images_loaded.  However, in the parallel case, the 
- *              image should only be read by process 0.  All other 
+ *              In the serial case, image_read should always equal
+ *              images_loaded.  However, in the parallel case, the
+ *              image should only be read by process 0.  All other
  *              processes should receive the cache image via a broadcast
  *              from process 0.
  *
@@ -4547,25 +4547,25 @@ typedef struct H5C_tag_info_t {
  *		loaded since the last time statistics were reset.
  *
  *		At present, this field must always be either 0 or 1.
- *		Further, since cache images are only loaded at the 
+ *		Further, since cache images are only loaded at the
  *		time of the first protect or on file close, this value
  *		should only change on those events.
  *
  * last_image_size:  Size of the most recently loaded metadata cache image
  *             loaded into the cache, or zero if no image has been
- *             loaded.  
+ *             loaded.
  *
- *             At present, at most one cache image can be loaded into 
+ *             At present, at most one cache image can be loaded into
  *             the metadata cache for any given file, and this image
  *             will be loaded either on the first protect, or on file
  *             close if no entry is protected before then.
  *
  *
  * Fields for tracking prefetched entries.  Note that flushes and evictions
- * of prefetched entries are tracked in the flushes and evictions arrays 
+ * of prefetched entries are tracked in the flushes and evictions arrays
  * discused above.
  *
- * prefetches:	Number of prefetched entries that are loaded to the 
+ * prefetches:	Number of prefetched entries that are loaded to the
  *		cache.
  *
  * dirty_prefetches:  Number of dirty prefetched entries that are loaded
@@ -4573,30 +4573,30 @@ typedef struct H5C_tag_info_t {
  *
  * prefetch_hits:  Number of prefetched entries that are actually used.
  *
- * 
- * As entries are now capable of moving, loading, dirtying, and deleting 
- * other entries in their pre_serialize and serialize callbacks, it has 
- * been necessary to insert code to restart scans of lists so as to avoid 
- * improper behavior if the next entry in the list is the target of one on 
+ *
+ * As entries are now capable of moving, loading, dirtying, and deleting
+ * other entries in their pre_serialize and serialize callbacks, it has
+ * been necessary to insert code to restart scans of lists so as to avoid
+ * improper behavior if the next entry in the list is the target of one on
  * these operations.
  *
- * The following fields are use to count such occurrences.  They are used 
- * both in tests (to verify that the scan has been restarted), and to 
+ * The following fields are use to count such occurrences.  They are used
+ * both in tests (to verify that the scan has been restarted), and to
  * obtain estimates of how frequently these restarts occur.
  *
  * slist_scan_restarts: Number of times a scan of the slist (that contains
- *		calls to H5C__flush_single_entry()) has been restarted to 
- *		avoid potential issues with change of status of the next 
+ *		calls to H5C__flush_single_entry()) has been restarted to
+ *		avoid potential issues with change of status of the next
  *		entry in the scan.
  *
  * LRU_scan_restarts: Number of times a scan of the LRU list (that contains
- *              calls to H5C__flush_single_entry()) has been restarted to 
- *              avoid potential issues with change of status of the next 
+ *              calls to H5C__flush_single_entry()) has been restarted to
+ *              avoid potential issues with change of status of the next
  *              entry in the scan.
  *
- * index_scan_restarts: Number of times a scan of the index has been 
+ * index_scan_restarts: Number of times a scan of the index has been
  *		restarted to avoid potential issues with load, insertion
- *		or change in flush dependency height of an entry other 
+ *		or change in flush dependency height of an entry other
  *		than the target entry as the result of call(s) to the
  *		pre_serialize or serialize callbacks.
  *
@@ -4850,7 +4850,7 @@ struct H5C_t {
     int32_t                     max_dirty_pf_entries_skipped_in_msic;
     int32_t                     max_entries_scanned_in_msic;
     int64_t                     entries_scanned_to_make_space;
- 
+
     /* Fields for tracking skip list scan restarts */
     int64_t			slist_scan_restarts;
     int64_t			LRU_scan_restarts;
diff --git a/src/H5Cprefetched.c b/src/H5Cprefetched.c
index 0befdf9..954dd60 100644
--- a/src/H5Cprefetched.c
+++ b/src/H5Cprefetched.c
@@ -66,7 +66,7 @@ static herr_t H5C__prefetched_entry_pre_serialize(H5F_t *f, void *thing,
     unsigned *flags_ptr);
 static herr_t H5C__prefetched_entry_serialize(const H5F_t *f, void *image_ptr,
     size_t len, void *thing);
-static herr_t H5C__prefetched_entry_notify(H5C_notify_action_t action, 
+static herr_t H5C__prefetched_entry_notify(H5C_notify_action_t action,
     void *thing);
 static herr_t H5C__prefetched_entry_free_icr(void *thing);
 static herr_t H5C__prefetched_entry_fsf_size(const void *thing,
@@ -111,12 +111,12 @@ const H5AC_class_t H5AC_PREFETCHED_ENTRY[1] = {{
 
 
 /***************************************************************************
- * With two exceptions, these functions should never be called, and thus 
+ * With two exceptions, these functions should never be called, and thus
  * there is little point in documenting them separately as they all simply
  * throw an error.
  *
  * See header comments for the two exceptions (free_icr and notify).
- * 
+ *
  *                                                     JRM - 8/13/15
  *
  ***************************************************************************/
@@ -157,8 +157,8 @@ H5C__prefetched_entry_verify_chksum(const void H5_ATTR_UNUSED *image_ptr,
 
 
 static void *
-H5C__prefetched_entry_deserialize(const void H5_ATTR_UNUSED * image_ptr, 
-    size_t H5_ATTR_UNUSED len, void H5_ATTR_UNUSED * udata, 
+H5C__prefetched_entry_deserialize(const void H5_ATTR_UNUSED * image_ptr,
+    size_t H5_ATTR_UNUSED len, void H5_ATTR_UNUSED * udata,
     hbool_t H5_ATTR_UNUSED * dirty_ptr)
 {
     FUNC_ENTER_STATIC_NOERR /* Yes, even though this pushes an error on the stack */
@@ -182,9 +182,9 @@ H5C__prefetched_entry_image_len(const void H5_ATTR_UNUSED *thing,
 
 
 static herr_t
-H5C__prefetched_entry_pre_serialize(H5F_t H5_ATTR_UNUSED *f, void H5_ATTR_UNUSED *thing, 
+H5C__prefetched_entry_pre_serialize(H5F_t H5_ATTR_UNUSED *f, void H5_ATTR_UNUSED *thing,
     haddr_t H5_ATTR_UNUSED addr, size_t H5_ATTR_UNUSED len,
-    haddr_t H5_ATTR_UNUSED *new_addr_ptr, size_t H5_ATTR_UNUSED *new_len_ptr, 
+    haddr_t H5_ATTR_UNUSED *new_addr_ptr, size_t H5_ATTR_UNUSED *new_len_ptr,
     unsigned H5_ATTR_UNUSED *flags_ptr)
 {
     FUNC_ENTER_STATIC_NOERR /* Yes, even though this pushes an error on the stack */
@@ -196,7 +196,7 @@ H5C__prefetched_entry_pre_serialize(H5F_t H5_ATTR_UNUSED *f, void H5_ATTR_UNUSED
 
 
 static herr_t
-H5C__prefetched_entry_serialize(const H5F_t H5_ATTR_UNUSED *f, 
+H5C__prefetched_entry_serialize(const H5F_t H5_ATTR_UNUSED *f,
     void H5_ATTR_UNUSED *image_ptr,
     size_t H5_ATTR_UNUSED len, void H5_ATTR_UNUSED *thing)
 {
@@ -211,7 +211,7 @@ H5C__prefetched_entry_serialize(const H5F_t H5_ATTR_UNUSED *f,
 /*-------------------------------------------------------------------------
  * Function:    H5C__prefetched_entry_notify
  *
- * Purpose:     On H5AC_NOTIFY_ACTION_BEFORE_EVICT, check to see if the 
+ * Purpose:     On H5AC_NOTIFY_ACTION_BEFORE_EVICT, check to see if the
  *		target entry is a child in a flush dependency relationship.
  *		If it is, destroy that flush dependency relationship.
  *
@@ -243,18 +243,18 @@ H5C__prefetched_entry_notify(H5C_notify_action_t action, void *_thing)
         case H5C_NOTIFY_ACTION_AFTER_INSERT:
         case H5C_NOTIFY_ACTION_AFTER_LOAD:
         case H5C_NOTIFY_ACTION_AFTER_FLUSH:
-        case H5C_NOTIFY_ACTION_ENTRY_DIRTIED: 
-        case H5C_NOTIFY_ACTION_ENTRY_CLEANED: 
-        case H5C_NOTIFY_ACTION_CHILD_DIRTIED: 
-        case H5C_NOTIFY_ACTION_CHILD_CLEANED: 
-        case H5C_NOTIFY_ACTION_CHILD_UNSERIALIZED: 
-        case H5C_NOTIFY_ACTION_CHILD_SERIALIZED: 
+        case H5C_NOTIFY_ACTION_ENTRY_DIRTIED:
+        case H5C_NOTIFY_ACTION_ENTRY_CLEANED:
+        case H5C_NOTIFY_ACTION_CHILD_DIRTIED:
+        case H5C_NOTIFY_ACTION_CHILD_CLEANED:
+        case H5C_NOTIFY_ACTION_CHILD_UNSERIALIZED:
+        case H5C_NOTIFY_ACTION_CHILD_SERIALIZED:
             /* do nothing */
             break;
 
         case H5C_NOTIFY_ACTION_BEFORE_EVICT:
             for(u = 0; u < entry_ptr->flush_dep_nparents; u++) {
-                H5C_cache_entry_t * parent_ptr; 
+                H5C_cache_entry_t * parent_ptr;
 
                 /* Sanity checks */
                 HDassert(entry_ptr->flush_dep_parent);
@@ -268,9 +268,9 @@ H5C__prefetched_entry_notify(H5C_notify_action_t action, void *_thing)
                     HGOTO_ERROR(H5E_CACHE, H5E_CANTUNDEPEND, FAIL, "unable to destroy prefetched entry flush dependency")
 
                 if(parent_ptr->prefetched) {
-                    /* In prefetched entries, the fd_child_count field is 
-                     * used in sanity checks elsewhere.  Thus update this 
-                     * field to reflect the destruction of the flush 
+                    /* In prefetched entries, the fd_child_count field is
+                     * used in sanity checks elsewhere.  Thus update this
+                     * field to reflect the destruction of the flush
                      * dependency relationship.
                      */
                     HDassert(parent_ptr->fd_child_count > 0);
@@ -335,8 +335,8 @@ done:
 } /* end H5C__prefetched_entry_free_icr() */
 
 
-static herr_t 
-H5C__prefetched_entry_fsf_size(const void H5_ATTR_UNUSED *thing, 
+static herr_t
+H5C__prefetched_entry_fsf_size(const void H5_ATTR_UNUSED *thing,
     hsize_t H5_ATTR_UNUSED *fsf_size_ptr)
 {
     FUNC_ENTER_STATIC_NOERR /* Yes, even though this pushes an error on the stack */
diff --git a/src/H5Cprivate.h b/src/H5Cprivate.h
index bd200e0..0ba0234 100644
--- a/src/H5Cprivate.h
+++ b/src/H5Cprivate.h
@@ -150,7 +150,7 @@
  *
  * These flags apply to H5C_protect()
  * 	H5C__READ_ONLY_FLAG
- *	H5C__FLUSH_LAST_FLAG		; super block only 
+ *	H5C__FLUSH_LAST_FLAG		; super block only
  *	H5C__FLUSH_COLLECTIVELY_FLAG	; super block only
  *
  * These flags apply to H5C_unprotect():
@@ -213,8 +213,8 @@
 #define H5C_DO_TAGGING_SANITY_CHECKS	1
 #define H5C_DO_EXTREME_SANITY_CHECKS	0
 #else /* NDEBUG */
-/* With rare execptions, the following defines should be set 
- * to 0 if NDEBUG is defined 
+/* With rare execptions, the following defines should be set
+ * to 0 if NDEBUG is defined
  */
 #define H5C_DO_SANITY_CHECKS		0
 #define H5C_DO_SLIST_SANITY_CHECKS	0
@@ -292,50 +292,50 @@ typedef struct H5C_t H5C_t;
  *	H5C__CLASS_NO_FLAGS_SET: No special processing.
  *
  *	H5C__CLASS_SPECULATIVE_LOAD_FLAG: This flag is used only in
- *              H5C_load_entry().  When it is set, entries are 
- *		permitted to change their sizes on the first attempt 
- *		to load.  
+ *              H5C_load_entry().  When it is set, entries are
+ *		permitted to change their sizes on the first attempt
+ *		to load.
  *
  *		If the new size is larger than the old, the read buffer
- *		is reallocated to the new size, loaded from file, and the 
- *		deserialize routine is called a second time on the 
- *		new buffer.  The entry returned by the first call to 
+ *		is reallocated to the new size, loaded from file, and the
+ *		deserialize routine is called a second time on the
+ *		new buffer.  The entry returned by the first call to
  *		the deserialize routine is discarded (via the free_icr
  *		call) after the new size is retrieved (via the image_len
- *		call).  Note that the new size is used as the size of the 
+ *		call).  Note that the new size is used as the size of the
  *		entry in the cache.
  *
- *		If the new size is smaller than the old, no new loads 
+ *		If the new size is smaller than the old, no new loads
  *		or deserializes are performed, but the new size becomes
  *		the size of the entry in the cache.
  *
- *		When this flag is set, an attempt to read past the 
- *		end of file could occur.  In this case, if the size 
- *		returned get_load_size callback would result in a 
- *		read past the end of file, the size is truncated to 
+ *		When this flag is set, an attempt to read past the
+ *		end of file could occur.  In this case, if the size
+ *		returned get_load_size callback would result in a
+ *		read past the end of file, the size is truncated to
  *		avoid this, and processing proceeds as normal.
  *
  *      The following flags may only appear in test code.
  *
  *	H5C__CLASS_SKIP_READS: This flags is intended only for use in test
  *		code.  When it is set, reads on load will be skipped,
- *		and an uninitialize buffer will be passed to the 
+ *		and an uninitialize buffer will be passed to the
  *		deserialize function.
  *
  *	H5C__CLASS_SKIP_WRITES: This flags is intended only for use in test
- *		code.  When it is set, writes of buffers prepared by the 
+ *		code.  When it is set, writes of buffers prepared by the
  *		serialize callback will be skipped.
  *
  * GET_INITIAL_LOAD_SIZE: Pointer to the 'get initial load size' function.
  *
- *	This function determines the size based on the information in the 
+ *	This function determines the size based on the information in the
  *	parameter "udata" or an initial speculative guess.  The size is
  *	returned in the parameter "image_len_ptr".
  *
  * 	For an entry with H5C__CLASS_NO_FLAGS_SET:
  *	  This function returns in "image_len_ptr" the on disk size of the
  *              entry.
- *	
+ *
  * 	For an entry with H5C__CLASS_SPECULATIVE_LOAD_FLAG:
  *	  This function returns in "image_len_ptr" an initial guess of the
  *              entry's on disk size.  This many bytes will be loaded from
@@ -359,7 +359,7 @@ typedef struct H5C_t H5C_t;
  *              This value is used by the cache to determine the size of
  *              the disk image for the metadata, in order to read the disk
  *              image from the file.
- *	
+ *
  *	Processing in the get_load_size function should proceed as follows:
  *
  *	If successful, the function will place the length in the *image_len_ptr
@@ -420,17 +420,17 @@ typedef struct H5C_t H5C_t;
  *	the same as the checksum stored in the metadata.
  *
  *	It computes the checksum based on the metadata stored in the
- *	parameter "image_ptr" and the actual length of the metadata in the 
+ *	parameter "image_ptr" and the actual length of the metadata in the
  * 	parameter "len"  which is obtained from the "get_load_size" callback.
  *
  *	The typedef for the verify_chksum callback is as follows:
  *
- *	   typedef htri_t (*H5C_verify_chksum_func_t)(const void *image_ptr, 
- *						      size_t len, 
+ *	   typedef htri_t (*H5C_verify_chksum_func_t)(const void *image_ptr,
+ *						      size_t len,
  *						      void *udata_ptr);
  *
  *	The parameters of the verify_chksum callback are as follows:
- *	
+ *
  *	image_ptr: Pointer to a buffer containing the metadata read in.
  *
  *	len: The actual length of the metadata.
@@ -539,23 +539,23 @@ typedef struct H5C_t H5C_t;
  *      responsible for serializing the data structure, not moving it on disk
  *      or resizing it.
  *
- *	In addition, the client may use the pre-serialize callback to 
- *	ensure that the entry is ready to be flushed -- in particular, 
- *	if the entry contains references to other entries that are in 
+ *	In addition, the client may use the pre-serialize callback to
+ *	ensure that the entry is ready to be flushed -- in particular,
+ *	if the entry contains references to other entries that are in
  *	temporary file space, the pre-serialize callback must move those
- *	entries into real file space so that the serialzed entry will 
+ *	entries into real file space so that the serialzed entry will
  *	contain no invalid data.
  *
  *	One would think that the base address and length of
- *	the length of the entry's image on disk would be well known. 
+ *	the length of the entry's image on disk would be well known.
  *	However, that need not be the case as free space section info
- *	entries will change size (and possibly location) depending on the 
- *	number of blocks of free space being manages, and fractal heap 
- *	direct blocks can change compressed size (and possibly location) 
+ *	entries will change size (and possibly location) depending on the
+ *	number of blocks of free space being manages, and fractal heap
+ *	direct blocks can change compressed size (and possibly location)
  *	on serialization if compression is enabled.  Similarly, it may
  *	be necessary to move entries from temporary to real file space.
  *
- *	The pre-serialize callback must report any such changes to the 
+ *	The pre-serialize callback must report any such changes to the
  *	cache, which must then update its internal structures as needed.
  *
  *	The typedef for the pre-serialize callback is as follows:
@@ -575,7 +575,7 @@ typedef struct H5C_t H5C_t;
  *		target entry.
  *
  *	thing:  Pointer to void containing the address of the in core
- *		representation of the target metadata cache entry. 
+ *		representation of the target metadata cache entry.
  *		This is the same pointer returned by a protect of the
  *		addr and len given above.
  *
@@ -587,8 +587,8 @@ typedef struct H5C_t H5C_t;
  *		production mode.
  *
  *	len:    Length in bytes of the in file image of the entry to be
- *		serialized.  Also the size the image passed to the 
- *		serialize callback (discussed below) unless that 
+ *		serialized.  Also the size the image passed to the
+ *		serialize callback (discussed below) unless that
  *		value is altered by this function.
  *
  *		This parameter is supplied mainly for sanity checking.
@@ -599,10 +599,10 @@ typedef struct H5C_t H5C_t;
  *	new_addr_ptr:  Pointer to haddr_t.  If the entry is moved by
  *		the serialize function, the new on disk base address must
  *		be stored in *new_addr_ptr, and the appropriate flag set
- *		in *flags_ptr.  
+ *		in *flags_ptr.
  *
- *		If the entry is not moved by the serialize function, 
- *		*new_addr_ptr is undefined on pre-serialize callback 
+ *		If the entry is not moved by the serialize function,
+ *		*new_addr_ptr is undefined on pre-serialize callback
  *		return.
  *
  *	new_len_ptr:  Pointer to size_t.  If the entry is resized by the
@@ -610,8 +610,8 @@ typedef struct H5C_t H5C_t;
  *		must be stored in *new_len_ptr, and the appropriate flag set
  *              in *flags_ptr.
  *
- *		If the entry is not resized by the pre-serialize function, 
- *		*new_len_ptr is undefined on pre-serialize callback 
+ *		If the entry is not resized by the pre-serialize function,
+ *		*new_len_ptr is undefined on pre-serialize callback
  *		return.
  *
  *	flags_ptr:  Pointer to an unsigned integer used to return flags
@@ -625,27 +625,27 @@ typedef struct H5C_t H5C_t;
  *	        must be stored in *new_len_ptr.
  *
  *	        If the H5C__SERIALIZE_MOVED_FLAG flag is set, the
- *	        new image base address must be stored in *new_addr_ptr. 
+ *	        new image base address must be stored in *new_addr_ptr.
  *
  *	Processing in the pre-serialize function should proceed as follows:
  *
  *	The pre-serialize function must examine the in core representation
  *	indicated by the thing parameter, if the pre-serialize function does
  *      not need to change the size or location of the on-disk image, it must
- *      set *flags_ptr to zero. 
+ *      set *flags_ptr to zero.
  *
  *	If the size of the on-disk image must be changed, the pre-serialize
  *      function must load the length of the new image into *new_len_ptr, and
- *      set the H5C__SERIALIZE_RESIZED_FLAG in *flags_ptr. 
+ *      set the H5C__SERIALIZE_RESIZED_FLAG in *flags_ptr.
  *
  *	If the base address of the on disk image must be changed, the
  *      pre-serialize function must set *new_addr_ptr to the new base address,
  *      and set the H5C__SERIALIZE_MOVED_FLAG in *flags_ptr.
  *
- *	In addition, the pre-serialize callback may perform any other 
+ *	In addition, the pre-serialize callback may perform any other
  *	processing required before the entry is written to disk
  *
- *	If it is successful, the function must return SUCCEED. 
+ *	If it is successful, the function must return SUCCEED.
  *
  *	If it fails for any reason, the function must return FAIL and
  *	push error information on the error stack with the error API
@@ -660,11 +660,11 @@ typedef struct H5C_t H5C_t;
  *
  *	At this point, the base address and length of the entry's image on
  *      disk must be well known and not change during the serialization
- *      process. 
+ *      process.
  *
- *	While any size and/or location changes must have been handled 
- *	by a pre-serialize call, the client may elect to handle any other 
- *	changes to the entry required to place it in correct form for 
+ *	While any size and/or location changes must have been handled
+ *	by a pre-serialize call, the client may elect to handle any other
+ *	changes to the entry required to place it in correct form for
  *	writing to disk in this call.
  *
  *	The typedef for the serialize callback is as follows:
@@ -698,20 +698,20 @@ typedef struct H5C_t H5C_t;
  *		production mode.
  *
  *	thing:  Pointer to void containing the address of the in core
- *		representation of the target metadata cache entry. 
+ *		representation of the target metadata cache entry.
  *		This is the same pointer returned by a protect of the
  *		addr and len given above.
  *
  *	Processing in the serialize function should proceed as follows:
  *
- *	If there are any remaining changes to the entry required before 
+ *	If there are any remaining changes to the entry required before
  *	write to disk, they must be dealt with first.
  *
- *	The serialize function must then examine the in core 
- *	representation indicated by the thing parameter, and write a 
- *	serialized image of its contents into the provided buffer. 
+ *	The serialize function must then examine the in core
+ *	representation indicated by the thing parameter, and write a
+ *	serialized image of its contents into the provided buffer.
  *
- *	If it is successful, the function must return SUCCEED. 
+ *	If it is successful, the function must return SUCCEED.
  *
  *	If it fails for any reason, the function must return FAIL and
  *	push error information on the error stack with the error API
@@ -737,25 +737,25 @@ typedef struct H5C_t H5C_t;
  *	thing:  Pointer to void containing the address of the in core
  *		representation of the target metadata cache entry.  This
  *		is the same pointer that would be returned by a protect
- *		of the addr and len of the entry. 
+ *		of the addr and len of the entry.
  *
  *	Processing in the notify function should proceed as follows:
  *
  *	The notify function may perform any action it would like, including
  *      metadata cache calls.
  *
- *	If the function is successful, it must return SUCCEED. 
+ *	If the function is successful, it must return SUCCEED.
  *
  *	If it fails for any reason, the function must return FAIL and
  *	push error information on the error stack with the error API
- *	routines. 
+ *	routines.
  *
  *
  * FREE_ICR: Pointer to the free ICR callback.
  *
  *	The free ICR callback is invoked by the metadata cache when it
  *	wishes to evict an entry, and needs the client to free the memory
- *	allocated for the in core representation. 
+ *	allocated for the in core representation.
  *
  *	The typedef for the free ICR callback is as follows:
  *
@@ -766,18 +766,18 @@ typedef struct H5C_t H5C_t;
  *	thing:  Pointer to void containing the address of the in core
  *		representation of the target metadata cache entry.  This
  *		is the same pointer that would be returned by a protect
- *		of the addr and len of the entry. 
+ *		of the addr and len of the entry.
  *
  *	Processing in the free ICR function should proceed as follows:
  *
  *	The free ICR function must free all memory allocated to the
- *	in core representation. 
+ *	in core representation.
  *
- *	If the function is successful, it must return SUCCEED. 
+ *	If the function is successful, it must return SUCCEED.
  *
  *	If it fails for any reason, the function must return FAIL and
  *	push error information on the error stack with the error API
- *	routines. 
+ *	routines.
  *
  *	At least when compiled with debug, it would be useful if the
  *	free ICR call would fail if the in core representation has been
@@ -787,30 +787,30 @@ typedef struct H5C_t H5C_t;
  *
  *	In principle, there is no need for the get file space free size
  *	callback.  However, as an optimization, it is sometimes convenient
- *	to allocate and free file space for a number of cache entries 
+ *	to allocate and free file space for a number of cache entries
  *	simultaneously in a single contiguous block of file space.
  *
  *	File space allocation is done by the client, so the metadata cache
  *	need not be involved.  However, since the metadata cache typically
- *      handles file space release when an entry is destroyed, some 
+ *      handles file space release when an entry is destroyed, some
  *	adjustment on the part of the metadata cache is required for this
  *	operation.
  *
- *      The get file space free size callback exists to support this 
+ *      The get file space free size callback exists to support this
  *	operation.
  *
- *	If a group of cache entries that were allocated as a group are to 
+ *	If a group of cache entries that were allocated as a group are to
  *	be discarded and their file space released, the type of the first
- *	(i.e. lowest address) entry in the group must implement the 
- *	get free file space size callback.  
+ *	(i.e. lowest address) entry in the group must implement the
+ *	get free file space size callback.
  *
- *	To free the file space of all entries in the group in a single 
- *	operation, first expunge all entries other than the first without 
- *	the free file space flag.  
+ *	To free the file space of all entries in the group in a single
+ *	operation, first expunge all entries other than the first without
+ *	the free file space flag.
  *
  *	Then, to complete the operation, unprotect or expunge the first
- *	entry in the block with the free file space flag set.  Since 
- *	the get free file space callback is implemented, the metadata 
+ *	entry in the block with the free file space flag set.  Since
+ *	the get free file space callback is implemented, the metadata
  *	cache will use this callback to get the size of the block to be
  *	freed, instead of using the size of the entry as is done otherwise.
  *
@@ -830,12 +830,12 @@ typedef struct H5C_t H5C_t;
  *              call of the associated addr and len.
  *
  *	fs_size_ptr: Pointer to hsize_t in which the callback will return
- *              the size of the piece of file space to be freed.  Note 
- *		that the space to be freed is presumed to have the same 
+ *              the size of the piece of file space to be freed.  Note
+ *		that the space to be freed is presumed to have the same
  *		base address as the cache entry.
  *
  *      The function simply returns the size of the block of file space
- *	to be freed in *fsf_size_ptr.  
+ *	to be freed in *fsf_size_ptr.
  *
  *	If the function is successful, it must return SUCCEED.
  *
@@ -847,16 +847,16 @@ typedef struct H5C_t H5C_t;
 
 /* Actions that can be reported to 'notify' client callback */
 typedef enum H5C_notify_action_t {
-    H5C_NOTIFY_ACTION_AFTER_INSERT,     /* Entry has been added to the cache 
+    H5C_NOTIFY_ACTION_AFTER_INSERT,     /* Entry has been added to the cache
                                          * via the insert call
                                          */
-    H5C_NOTIFY_ACTION_AFTER_LOAD,	/* Entry has been loaded into the 
+    H5C_NOTIFY_ACTION_AFTER_LOAD,	/* Entry has been loaded into the
                                          * from file via the protect call
                                          */
     H5C_NOTIFY_ACTION_AFTER_FLUSH,	/* Entry has just been flushed to
  					 * file.
                                          */
-    H5C_NOTIFY_ACTION_BEFORE_EVICT,     /* Entry is about to be evicted 
+    H5C_NOTIFY_ACTION_BEFORE_EVICT,     /* Entry is about to be evicted
                                          * from cache.
                                          */
     H5C_NOTIFY_ACTION_ENTRY_DIRTIED,    /* Entry has been marked dirty. */
@@ -911,45 +911,45 @@ typedef herr_t (*H5C_log_flush_func_t)(H5C_t *cache_ptr, haddr_t addr,
  *
  * H5C_ring_t & associated #defines
  *
- * The metadata cache uses the concept of rings to order the flushes of 
- * classes of entries.  In this arrangement, each entry in the cache is 
- * assigned to a ring, and on flush, the members of the outermost ring 
+ * The metadata cache uses the concept of rings to order the flushes of
+ * classes of entries.  In this arrangement, each entry in the cache is
+ * assigned to a ring, and on flush, the members of the outermost ring
  * are flushed first, followed by the next outermost, and so on with the
- * members of the innermost ring being flushed last.  
+ * members of the innermost ring being flushed last.
  *
- * Note that flush dependencies are used to order flushes within rings.  
+ * Note that flush dependencies are used to order flushes within rings.
  *
  * Note also that at the conceptual level, rings are argueably superfluous,
- * as a similar effect could be obtained via the flush dependency mechanism.  
- * However, this would require all entries in the cache to participate in a 
- * flush dependency -- with the implied setup and takedown overhead and 
- * added complexity.  Further, the flush ordering between rings need only 
- * be enforced on flush operations, and thus the use of flush dependencies 
- * instead would apply unnecessary constraints on flushes under normal 
+ * as a similar effect could be obtained via the flush dependency mechanism.
+ * However, this would require all entries in the cache to participate in a
+ * flush dependency -- with the implied setup and takedown overhead and
+ * added complexity.  Further, the flush ordering between rings need only
+ * be enforced on flush operations, and thus the use of flush dependencies
+ * instead would apply unnecessary constraints on flushes under normal
  * operating circumstances.
  *
- * As of this writing, all metadata entries pretaining to data sets and 
- * groups must be flushed first, and are thus assigned to the outermost 
- * ring.  
+ * As of this writing, all metadata entries pretaining to data sets and
+ * groups must be flushed first, and are thus assigned to the outermost
+ * ring.
  *
  * Free space managers managing file space must be flushed next,
  * and are assigned to the second and third outermost rings.  Two rings
  * are used here as the raw data free space manager must be flushed before
  * the metadata free space manager.
  *
- * The object header and associated chunks used to implement superblock 
- * extension messages must be flushed next, and are thus assigned to 
+ * The object header and associated chunks used to implement superblock
+ * extension messages must be flushed next, and are thus assigned to
  * the fourth outermost ring.
  *
- * The superblock proper must be flushed last, and is thus assigned to 
+ * The superblock proper must be flushed last, and is thus assigned to
  * the innermost ring.
  *
  * The H5C_ring_t and the associated #defines below are used to define
- * the rings.  Each entry must be assigned to the appropriate ring on 
+ * the rings.  Each entry must be assigned to the appropriate ring on
  * insertion or protect.
  *
- * Note that H5C_ring_t was originally an enumerated type.  It was 
- * converted to an integer and a set of #defines for convenience in 
+ * Note that H5C_ring_t was originally an enumerated type.  It was
+ * converted to an integer and a set of #defines for convenience in
  * debugging.
  */
 
@@ -1015,8 +1015,8 @@ typedef int H5C_ring_t;
  * 		dynamically allocated block of size bytes in which the
  * 		on disk image of the metadata cache entry is stored.
  *
- * 		If the entry is dirty, the pre-serialize and serialize 
- *		callbacks must be used to update this image before it is 
+ * 		If the entry is dirty, the pre-serialize and serialize
+ *		callbacks must be used to update this image before it is
  *		written to disk
  *
  * image_up_to_date:  Boolean flag that is set to TRUE when *image_ptr
@@ -1038,14 +1038,14 @@ typedef int H5C_ring_t;
  * 		dirtied while protected.
  *
  * 		This field is set to FALSE in the protect call, and may
- * 		be set to TRUE by the H5C_mark_entry_dirty() call at any 
+ * 		be set to TRUE by the H5C_mark_entry_dirty() call at any
  *		time prior to the unprotect call.
  *
- * 		The H5C_mark_entry_dirty() call exists as a convenience 
- *		function for the fractal heap code which may not know if 
- *		an entry is protected or pinned, but knows that is either 
- *		protected or pinned.  The dirtied field was added as in 
- *		the parallel case, it is necessary to know whether a 
+ * 		The H5C_mark_entry_dirty() call exists as a convenience
+ *		function for the fractal heap code which may not know if
+ *		an entry is protected or pinned, but knows that is either
+ *		protected or pinned.  The dirtied field was added as in
+ *		the parallel case, it is necessary to know whether a
  *		protected entry is dirty prior to the protect call.
  *
  * is_protected: Boolean flag indicating whether this entry is protected
@@ -1090,9 +1090,9 @@ typedef int H5C_ring_t;
  * 		   policy code (LRU at present).
  *
  * 		2) A pinned entry can be accessed or modified at any time.
- * 		   This places an extra burden on the pre-serialize and 
- *		   serialize callbacks, which must ensure that a pinned 
- *		   entry is consistent and ready to write to disk before 
+ * 		   This places an extra burden on the pre-serialize and
+ *		   serialize callbacks, which must ensure that a pinned
+ *		   entry is consistent and ready to write to disk before
  *		   generating an image.
  *
  * 		3) A pinned entry can be marked as dirty (and possibly
@@ -1121,9 +1121,9 @@ typedef int H5C_ring_t;
  *		flushed from the cache until all other entries without
  *              the flush_me_last flag set have been flushed.
  *
- *		Note: 
- *		
- *		At this time, the flush_me_last 
+ *		Note:
+ *
+ *		At this time, the flush_me_last
  *              flag will only be applied to one entry, the superblock,
  *              and the code utilizing these flags is protected with HDasserts
  *              to enforce this. This restraint can certainly be relaxed in
@@ -1149,11 +1149,11 @@ typedef int H5C_ring_t;
  *		the unprotect, the entry's is_dirty flag is reset by flushing
  *		it with the H5C__FLUSH_CLEAR_ONLY_FLAG.
  *
- * flush_immediately:  Boolean flag used only in Phdf5 -- and then only 
+ * flush_immediately:  Boolean flag used only in Phdf5 -- and then only
  *		for H5AC_METADATA_WRITE_STRATEGY__DISTRIBUTED.
  *
- *		When a distributed metadata write is triggered at a 
- *		sync point, this field is used to mark entries that 
+ *		When a distributed metadata write is triggered at a
+ *		sync point, this field is used to mark entries that
  *		must be flushed before leaving the sync point.  At all
  *		other times, this field should be set to FALSE.
  *
@@ -1167,10 +1167,10 @@ typedef int H5C_ring_t;
  *
  * Fields supporting rings for flush ordering:
  *
- * All entries in the metadata cache are assigned to a ring.  On cache 
+ * All entries in the metadata cache are assigned to a ring.  On cache
  * flush, all entries in the outermost ring are flushed first, followed
- * by all members of the next outermost ring, and so on until the 
- * innermost ring is flushed.  Note that this ordering is ONLY applied 
+ * by all members of the next outermost ring, and so on until the
+ * innermost ring is flushed.  Note that this ordering is ONLY applied
  * in flush and serialize calls.  Rings are ignored during normal operations
  * in which entries are flushed as directed by the replacement policy.
  *
@@ -1211,7 +1211,7 @@ typedef int H5C_ring_t;
  *              this field is nonzero, then this entry cannot be flushed.
  *
  * flush_dep_nunser_children:  Number of flush dependency children
- *		that are either unserialized, or have a non-zero number of 
+ *		that are either unserialized, or have a non-zero number of
  *		positive number of unserialized children.
  *
  *		Note that since there is no requirement that a clean entry
@@ -1219,7 +1219,7 @@ typedef int H5C_ring_t;
  *		to be greater than flush_dep_ndirty_children.
  *
  *		This field exist to facilitate correct ordering of entry
- *		serializations when it is necessary to serialize all the 
+ *		serializations when it is necessary to serialize all the
  *		entries in the metadata cache.  Thus in the cache
  *		serialization, no entry can be serialized unless this
  *		field contains 0.
@@ -1232,7 +1232,7 @@ typedef int H5C_ring_t;
  *
  * Addendum:  JRM -- 10/14/15
  *
- * We have come to scan all entries in the cache frequently enough that 
+ * We have come to scan all entries in the cache frequently enough that
  * the cost of doing so by scanning the hash table has become unacceptable.
  * To reduce this cost, the index now also maintains a doubly linked list
  * of all entries in the index.  This list is known as the index list.
@@ -1251,12 +1251,12 @@ typedef int H5C_ring_t;
  *
  * il_next:	Next pointer used by the index to maintain a doubly linked
  *		list of all entries in the index (and thus in the cache).
- *		This field contains a pointer to the next entry in the 
+ *		This field contains a pointer to the next entry in the
  *		index list, or NULL if there is no next entry.
  *
  * il_prev:	Prev pointer used by the index to maintain a doubly linked
  *		list of all entries in the index (and thus in the cache).
- *		This field contains a pointer to the previous entry in the 
+ *		This field contains a pointer to the previous entry in the
  *		index list, or NULL if there is no previous entry.
  *
  *
@@ -1294,71 +1294,71 @@ typedef int H5C_ring_t;
  * The use of the replacement policy fields under the Modified LRU policy
  * is discussed below:
  *
- * next:	Next pointer in either the LRU, the protected list, or 
- *		the pinned list depending on the current values of 
- *		is_protected and is_pinned.  If there is no next entry 
+ * next:	Next pointer in either the LRU, the protected list, or
+ *		the pinned list depending on the current values of
+ *		is_protected and is_pinned.  If there is no next entry
  *		on the list, this field should be set to NULL.
  *
  * prev:	Prev pointer in either the LRU, the protected list,
- *		or the pinned list depending on the current values of 
- *		is_protected and is_pinned.  If there is no previous 
+ *		or the pinned list depending on the current values of
+ *		is_protected and is_pinned.  If there is no previous
  *		entry on the list, this field should be set to NULL.
  *
  * aux_next:	Next pointer on either the clean or dirty LRU lists.
- *		This entry should be NULL when either is_protected or 
- *		is_pinned is true.  
+ *		This entry should be NULL when either is_protected or
+ *		is_pinned is true.
  *
- *		When is_protected and is_pinned are false, and is_dirty is 
- *		true, it should point to the next item on the dirty LRU 
- *		list.  
+ *		When is_protected and is_pinned are false, and is_dirty is
+ *		true, it should point to the next item on the dirty LRU
+ *		list.
  *
- *		When is_protected and is_pinned are false, and is_dirty is 
- *		false, it should point to the next item on the clean LRU 
- *		list.  In either case, when there is no next item, it 
+ *		When is_protected and is_pinned are false, and is_dirty is
+ *		false, it should point to the next item on the clean LRU
+ *		list.  In either case, when there is no next item, it
  *		should be NULL.
  *
  * aux_prev:	Previous pointer on either the clean or dirty LRU lists.
- *		This entry should be NULL when either is_protected or 
- *		is_pinned is true.  
- *
- *		When is_protected and is_pinned are false, and is_dirty is 
- *		true, it should point to the previous item on the dirty 
- *		LRU list.  
- *	
- *		When is_protected and is_pinned are false, and is_dirty 
- *		is false, it should point to the previous item on the 
- *		clean LRU list.  
- *
- *		In either case, when there is no previous item, it should 
+ *		This entry should be NULL when either is_protected or
+ *		is_pinned is true.
+ *
+ *		When is_protected and is_pinned are false, and is_dirty is
+ *		true, it should point to the previous item on the dirty
+ *		LRU list.
+ *
+ *		When is_protected and is_pinned are false, and is_dirty
+ *		is false, it should point to the previous item on the
+ *		clean LRU list.
+ *
+ *		In either case, when there is no previous item, it should
  *		be NULL.
  *
  * Fields supporting the cache image feature:
  *
- * The following fields are used to store data about the entry which must 
- * be stored in the cache image block, but which will typically be either 
- * lost or heavily altered in the process of serializing the cache and 
+ * The following fields are used to store data about the entry which must
+ * be stored in the cache image block, but which will typically be either
+ * lost or heavily altered in the process of serializing the cache and
  * preparing its contents to be copied into the cache image block.
  *
  * Some fields are also used in loading the contents of the metadata cache
- * image back into the cache, and in managing such entries until they are 
- * either protected by the library (at which point they become regular 
- * entries) or are evicted.  See discussion of the prefetched field for 
+ * image back into the cache, and in managing such entries until they are
+ * either protected by the library (at which point they become regular
+ * entries) or are evicted.  See discussion of the prefetched field for
  * further details.
  *
  * include_in_image: Boolean flag indicating whether this entry should
  *		be included in the metadata cache image.  This field should
  *		always be false prior to the H5C_prep_for_file_close() call.
  *		During that call, it should be set to TRUE for all entries
- *		that are to be included in the metadata cache image.  At 
- *		present, only the superblock, the superblock extension 
- *		object header and its chunks (if any) are omitted from 
+ *		that are to be included in the metadata cache image.  At
+ *		present, only the superblock, the superblock extension
+ *		object header and its chunks (if any) are omitted from
  *		the image.
  *
  * lru_rank:	Rank of the entry in the LRU just prior to file close.
  *
  *		Note that the first entry on the LRU has lru_rank 1,
- *		and that entries not on the LRU at that time will have 
- *		either lru_rank -1 (if pinned) or 0 (if loaded during 
+ *		and that entries not on the LRU at that time will have
+ *		either lru_rank -1 (if pinned) or 0 (if loaded during
  *		the process of flushing the cache.
  *
  * image_dirty: Boolean flag indicating whether the entry should be marked
@@ -1366,125 +1366,125 @@ typedef int H5C_ring_t;
  *		TRUE iff the entry is dirty when H5C_prep_for_file_close()
  *		is called.
  *
- * fd_parent_count: If the entry is a child in one or more flush dependency 
- *		relationships, this field contains the number of flush 
+ * fd_parent_count: If the entry is a child in one or more flush dependency
+ *		relationships, this field contains the number of flush
  *		dependency parents.
  *
  *		In all other cases, the field is set to zero.
  *
- *		Note that while this count is initially taken from the 
- *		flush dependency fields above, if the entry is in the 
+ *		Note that while this count is initially taken from the
+ *		flush dependency fields above, if the entry is in the
  *		cache image (i.e. include_in_image is TRUE), any parents
  *		that are not in the image are removed from this count and
  *		from the fd_parent_addrs array below.
  *
- *		Finally observe that if the entry is dirty and in the 
+ *		Finally observe that if the entry is dirty and in the
  *		cache image, and its parent is dirty and not in the cache
  *		image, then the entry must be removed from the cache image
  *		to avoid violating the flush dependency flush ordering.
  *
- * fd_parent_addrs: If the entry is a child in one or more flush dependency 
- *		relationship when H5C_prep_for_file_close() is called, this 
- *		field must contain a pointer to an array of size 
- *		fd_parent_count containing the on disk addresses of the 
+ * fd_parent_addrs: If the entry is a child in one or more flush dependency
+ *		relationship when H5C_prep_for_file_close() is called, this
+ *		field must contain a pointer to an array of size
+ *		fd_parent_count containing the on disk addresses of the
  *		parent.
  *
  *		In all other cases, the field is set to NULL.
  *
- *		Note that while this list of addresses is initially taken 
- *		from the flush dependency fields above, if the entry is in the 
+ *		Note that while this list of addresses is initially taken
+ *		from the flush dependency fields above, if the entry is in the
  *		cache image (i.e. include_in_image is TRUE), any parents
- *		that are not in the image are removed from this list, and 
+ *		that are not in the image are removed from this list, and
  *		and from the fd_parent_count above.
  *
- *		Finally observe that if the entry is dirty and in the 
+ *		Finally observe that if the entry is dirty and in the
  *		cache image, and its parent is dirty and not in the cache
  *		image, then the entry must be removed from the cache image
  *		to avoid violating the flush dependency flush ordering.
  *
- * fd_child_count: If the entry is a parent in a flush dependency 
- *		relationship, this field contains the number of flush 
+ * fd_child_count: If the entry is a parent in a flush dependency
+ *		relationship, this field contains the number of flush
  *		dependency children.
  *
  *		In all other cases, the field is set to zero.
  *
- *		Note that while this count is initially taken from the 
- *		flush dependency fields above, if the entry is in the 
+ *		Note that while this count is initially taken from the
+ *		flush dependency fields above, if the entry is in the
  *		cache image (i.e. include_in_image is TRUE), any children
  *		that are not in the image are removed from this count.
  *
- * fd_dirty_child_count: If the entry is a parent in a flush dependency 
- *		relationship, this field contains the number of dirty flush 
+ * fd_dirty_child_count: If the entry is a parent in a flush dependency
+ *		relationship, this field contains the number of dirty flush
  *		dependency children.
  *
  *		In all other cases, the field is set to zero.
  *
- *		Note that while this count is initially taken from the 
- *		flush dependency fields above, if the entry is in the 
- *		cache image (i.e. include_in_image is TRUE), any dirty 
- *		children that are not in the image are removed from this 
+ *		Note that while this count is initially taken from the
+ *		flush dependency fields above, if the entry is in the
+ *		cache image (i.e. include_in_image is TRUE), any dirty
+ *		children that are not in the image are removed from this
  *		count.
  *
  * image_fd_height: Flush dependency height of the entry in the cache image.
  *
- *		The flush dependency height of any entry involved in a 
- *		flush dependency relationship is defined to be the 
+ *		The flush dependency height of any entry involved in a
+ *		flush dependency relationship is defined to be the
  *		longest flush dependency path from that entry to an entry
- *		with no flush dependency children.  
+ *		with no flush dependency children.
  *
- *		Since the image_fd_height is used to order entries in the 
- *		cache image so that fd parents preceed fd children, for 
+ *		Since the image_fd_height is used to order entries in the
+ *		cache image so that fd parents preceed fd children, for
  *		purposes of this field, and entry is at flush dependency
  *		level 0 if it either has no children, or if all of its
- *		children are not in the cache image.  
+ *		children are not in the cache image.
  *
- *		Note that if a child in a flush dependency relationship is 
+ *		Note that if a child in a flush dependency relationship is
  *		dirty and in the cache image, and its parent is dirty and
- *		not in the cache image, then the child must be excluded 
+ *		not in the cache image, then the child must be excluded
  *		from the cache image to maintain flush ordering.
  *
  * prefetched:	Boolean flag indicating that the on disk image of the entry
- *		has been loaded into the cache prior any request for the 
+ *		has been loaded into the cache prior any request for the
  *		entry by the rest of the library.
  *
- *		As of this writing (8/10/15), this can only happen through 
- *		the load of a cache image block, although other scenarios 
- *		are contemplated for the use of this feature.  Note that 
- *		unlike the usual prefetch situation, this means that a 
- *		prefetched entry can be dirty, and/or can be a party to 
- *		flush dependency relationship(s).  This complicates matters 
+ *		As of this writing (8/10/15), this can only happen through
+ *		the load of a cache image block, although other scenarios
+ *		are contemplated for the use of this feature.  Note that
+ *		unlike the usual prefetch situation, this means that a
+ *		prefetched entry can be dirty, and/or can be a party to
+ *		flush dependency relationship(s).  This complicates matters
  *		somewhat.
  *
- *		The essential feature of a prefetched entry is that it 
- *		consists only of a buffer containing the on disk image of 
- *		the entry.  Thus it must be deserialized before it can 
- *		be passed back to the library on a protect call.  This 
+ *		The essential feature of a prefetched entry is that it
+ *		consists only of a buffer containing the on disk image of
+ *		the entry.  Thus it must be deserialized before it can
+ *		be passed back to the library on a protect call.  This
  *		task is handled by H5C_deserialized_prefetched_entry().
- *		In essence, this routine calls the deserialize callback 
- *		provided in the protect call with the on disk image, 
+ *		In essence, this routine calls the deserialize callback
+ *		provided in the protect call with the on disk image,
  *		deletes the prefetched entry from the cache, and replaces
  *		it with the deserialized entry returned by the deserialize
  *		callback.
  *
- *		Further, if the prefetched entry is a flush dependency parent, 
- *		all its flush dependency children (which must also be 
- *		prefetched entries), must be transferred to the new cache 
+ *		Further, if the prefetched entry is a flush dependency parent,
+ *		all its flush dependency children (which must also be
+ *		prefetched entries), must be transferred to the new cache
  *		entry returned by the deserialization callback.
  *
- *		Finally, if the prefetched entry is a flush dependency child, 
- *		this flush dependency must be destroyed prior to the 
+ *		Finally, if the prefetched entry is a flush dependency child,
+ *		this flush dependency must be destroyed prior to the
  *		deserialize call.
  *
- *		In addition to the above special processing on the first 
+ *		In addition to the above special processing on the first
  *		protect call on a prefetched entry (after which is no longer
- *		a prefetched entry), prefetched entries also require special 
+ *		a prefetched entry), prefetched entries also require special
  *		tretment on flush and evict.
  *
- *		On flush, a dirty prefetched entry must simply be written 
- *		to disk and marked clean without any call to any client 
+ *		On flush, a dirty prefetched entry must simply be written
+ *		to disk and marked clean without any call to any client
  *		callback.
  *
- *		On eviction, if a prefetched entry is a flush dependency 
+ *		On eviction, if a prefetched entry is a flush dependency
  *		child, that flush dependency relationship must be destroyed
  *		just prior to the eviction.  If the flush dependency code
  *		is working properly, it should be impossible for any entry
@@ -1496,35 +1496,35 @@ typedef int H5C_ring_t;
  *
  *		The value of this field is undefined in prefetched is FALSE.
  *
- * age:		Number of times a prefetched entry has appeared in 
- *		subsequent cache images. The field exists to allow 
- *		imposition of a limit on how many times a prefetched 
+ * age:		Number of times a prefetched entry has appeared in
+ *		subsequent cache images. The field exists to allow
+ *		imposition of a limit on how many times a prefetched
  *		entry can appear in subsequent cache images without being
  *		converted to a regular entry.
  *
- *		This field must be zero if prefetched is FALSE.  
+ *		This field must be zero if prefetched is FALSE.
  *
  * prefetched_dirty:  Boolean field that must be set to FALSE unless the
  *		following conditions hold:
  *
  *		    1) The file has been opened R/O.
  *
- *		    2) The entry is either a prefetched entry, or was 
+ *		    2) The entry is either a prefetched entry, or was
  *                     re-constructed from a prefetched entry.
  *
  *                  3) The base prefetched entry was marked dirty.
  *
- *              This field exists to solve the following problem with 
+ *              This field exists to solve the following problem with
  *              files containing cache images that are opened R/O.
  *
  *              If the cache image contains a dirty entry, that entry
  *              must be marked clean when it is inserted into the cache
- *              in the read-only case, as otherwise the metadata cache 
- *              will attempt to flush it on file close -- which is poor 
+ *              in the read-only case, as otherwise the metadata cache
+ *              will attempt to flush it on file close -- which is poor
  *              form in the read-only case.
  *
- *              However, since the entry is marked clean, it is possible 
- *              that the metadata cache will evict it if the size of the 
+ *              However, since the entry is marked clean, it is possible
+ *              that the metadata cache will evict it if the size of the
  *              metadata in the file exceeds the size of the metadata cache,
  *              and the application visits much of this data.
  *
@@ -1534,24 +1534,24 @@ typedef int H5C_ring_t;
  *              the entry has ever been written to it assigned location in
  *              the file.
  *
- *              With this background, the purpose of this field should be 
- *              obvious -- when set, it allows the eviction candidate 
- *              selection code to skip over the entry, thus avoiding the 
+ *              With this background, the purpose of this field should be
+ *              obvious -- when set, it allows the eviction candidate
+ *              selection code to skip over the entry, thus avoiding the
  *              issue.
  *
- *              Since the issue only arises in the R/O case, there is 
- *              no possible interaction with SWMR.  There are also 
+ *              Since the issue only arises in the R/O case, there is
+ *              no possible interaction with SWMR.  There are also
  *              potential interactions with Evict On Close -- at present,
  *              we deal with this by disabling EOC in the R/O case.
  *
- * serialization_count:  Integer field used to maintain a count of the 
- *		number of times each entry is serialized during cache 
+ * serialization_count:  Integer field used to maintain a count of the
+ *		number of times each entry is serialized during cache
  *		serialization.  While no entry should be serialized more than
- *		once in any serialization call, throw an assertion if any 
- *		flush depencency parent is serialized more than once during 
+ *		once in any serialization call, throw an assertion if any
+ *		flush depencency parent is serialized more than once during
  *		a single cache serialization.
  *
- *		This is a debugging field, and thus is maintained only if 
+ *		This is a debugging field, and thus is maintained only if
  *		NDEBUG is undefined.
  *
  * Fields supporting tagged entries:
@@ -1688,7 +1688,7 @@ typedef struct H5C_cache_entry_t {
  * structure H5C_image_entry_t
  *
  * Instances of the H5C_image_entry_t structure are used to store data on
- * metadata cache entries used in the construction of the metadata cache 
+ * metadata cache entries used in the construction of the metadata cache
  * image block.  In essence this structure is a greatly simplified version
  * of H5C_cache_entry_t.
  *
@@ -1705,17 +1705,17 @@ typedef struct H5C_cache_entry_t {
  *
  * size:	Length of the cache entry on disk in bytes.
  *
- * ring:	Instance of H5C_ring_t indicating the flush ordering ring 
+ * ring:	Instance of H5C_ring_t indicating the flush ordering ring
  *		to which this entry is assigned.
  *
- * age:		Number of times this prefetech entry has appeared in 
- *		the current sequence of cache images.  This field is 
+ * age:		Number of times this prefetech entry has appeared in
+ *		the current sequence of cache images.  This field is
  *		initialized to 0 if the instance of H5C_image_entry_t
- *		is constructed from a regular entry.  
+ *		is constructed from a regular entry.
  *
- *		If the instance is constructed from a prefetched entry 
+ *		If the instance is constructed from a prefetched entry
  *		currently residing in the metadata cache, the field is
- *		set to 1 + the age of the prefetched entry, or to 
+ *		set to 1 + the age of the prefetched entry, or to
  *		H5AC__CACHE_IMAGE__ENTRY_AGEOUT__MAX if that sum exceeds
  *		H5AC__CACHE_IMAGE__ENTRY_AGEOUT__MAX.
  *
@@ -1724,8 +1724,8 @@ typedef struct H5C_cache_entry_t {
  * lru_rank:	Rank of the entry in the LRU just prior to file close.
  *
  *		Note that the first entry on the LRU has lru_rank 1,
- *		and that entries not on the LRU at that time will have 
- *		either lru_rank -1 (if pinned) or 0 (if loaded during 
+ *		and that entries not on the LRU at that time will have
+ *		either lru_rank -1 (if pinned) or 0 (if loaded during
  *		the process of flushing the cache.
  *
  * is_dirty:	Boolean flag indicating whether the contents of the cache
@@ -1757,9 +1757,9 @@ typedef struct H5C_cache_entry_t {
  *              In all other cases, the field is set to zero.
  *
  *              Note that while this count is initially taken from the
- *              flush dependency fields in the associated instance of 
- *		H5C_cache_entry_t, if the entry is in the cache image 
- *		(i.e. include_in_image is TRUE), any parents that are 
+ *              flush dependency fields in the associated instance of
+ *		H5C_cache_entry_t, if the entry is in the cache image
+ *		(i.e. include_in_image is TRUE), any parents that are
  *		not in the image are removed from this count and
  *              from the fd_parent_addrs array below.
  *
@@ -1767,7 +1767,7 @@ typedef struct H5C_cache_entry_t {
  *              cache image, and its parent is dirty and not in the cache
  *              image, then the entry must be removed from the cache image
  *              to avoid violating the flush dependency flush ordering.
- *		This should have happened before the construction of 
+ *		This should have happened before the construction of
  *		the instance of H5C_image_entry_t.
  *
  * fd_parent_addrs: If the entry is a child in one or more flush dependency
@@ -1780,27 +1780,27 @@ typedef struct H5C_cache_entry_t {
  *
  *              Note that while this list of addresses is initially taken
  *              from the flush dependency fields in the associated instance of
- *              H5C_cache_entry_t, if the entry is in the cache image 
- *		(i.e. include_in_image is TRUE), any parents that are not 
- *		in the image are removed from this list, and from the 
+ *              H5C_cache_entry_t, if the entry is in the cache image
+ *		(i.e. include_in_image is TRUE), any parents that are not
+ *		in the image are removed from this list, and from the
  *		fd_parent_count above.
  *
  *              Finally observe that if the entry is dirty and in the
  *              cache image, and its parent is dirty and not in the cache
  *              image, then the entry must be removed from the cache image
  *              to avoid violating the flush dependency flush ordering.
- *		This should have happened before the construction of 
+ *		This should have happened before the construction of
  *		the instance of H5C_image_entry_t.
  *
- * fd_child_count: If the entry is a parent in a flush dependency 
- *		relationship, this field contains the number of flush 
+ * fd_child_count: If the entry is a parent in a flush dependency
+ *		relationship, this field contains the number of flush
  *		dependency children.
  *
  *		In all other cases, the field is set to zero.
  *
  *              Note that while this count is initially taken from the
  *              flush dependency fields in the associated instance of
- *              H5C_cache_entry_t, if the entry is in the cache image 
+ *              H5C_cache_entry_t, if the entry is in the cache image
  *		(i.e. include_in_image is TRUE), any children
  *              that are not in the image are removed from this count.
  *
@@ -1812,16 +1812,16 @@ typedef struct H5C_cache_entry_t {
  *
  *              Note that while this count is initially taken from the
  *              flush dependency fields in the associated instance of
- *              H5C_cache_entry_t, if the entry is in the cache image 
- *		(i.e. include_in_image is TRUE), any dirty children 
+ *              H5C_cache_entry_t, if the entry is in the cache image
+ *		(i.e. include_in_image is TRUE), any dirty children
  *		that are not in the image are removed from this count.
  *
  * image_ptr:	Pointer to void.  When not NULL, this field points to a
  * 		dynamically allocated block of size bytes in which the
  * 		on disk image of the metadata cache entry is stored.
  *
- * 		If the entry is dirty, the pre-serialize and serialize 
- *		callbacks must be used to update this image before it is 
+ * 		If the entry is dirty, the pre-serialize and serialize
+ *		callbacks must be used to update this image before it is
  *		written to disk
  *
  *
@@ -2141,7 +2141,7 @@ typedef struct H5C_auto_size_ctl_t {
  * fields for generation of a metadata cache image on file close.
  *
  * At present control of construction of a cache image is via a FAPL
- * property at file open / create.  
+ * property at file open / create.
  *
  * The fields of the structure are discussed individually below:
  *
@@ -2150,43 +2150,43 @@ typedef struct H5C_auto_size_ctl_t {
  *	H5C_image_ctl_t passed to the cache must have a known
  *	version number, or an error will be flagged.
  *
- * generate_image:  Boolean flag indicating whether a cache image should 
+ * generate_image:  Boolean flag indicating whether a cache image should
  *	be created on file close.
  *
- * save_resize_status:  Boolean flag indicating whether the cache image 
+ * save_resize_status:  Boolean flag indicating whether the cache image
  *      should include the adaptive cache resize configuration and status.
  *      Note that this field is ignored at present.
  *
  * entry_ageout:        Integer field indicating the maximum number of
  *      times a prefetched entry can appear in subsequent cache images.
- *      This field exists to allow the user to avoid the buildup of 
+ *      This field exists to allow the user to avoid the buildup of
  *      infrequently used entries in long sequences of cache images.
  *
  *      The value of this field must lie in the range
- *      H5AC__CACHE_IMAGE__ENTRY_AGEOUT__NONE (-1) to 
+ *      H5AC__CACHE_IMAGE__ENTRY_AGEOUT__NONE (-1) to
  *      H5AC__CACHE_IMAGE__ENTRY_AGEOUT__MAX (100).
  *
- *      H5AC__CACHE_IMAGE__ENTRY_AGEOUT__NONE means that no limit  
+ *      H5AC__CACHE_IMAGE__ENTRY_AGEOUT__NONE means that no limit
  *      is imposed on number of times a prefeteched entry can appear
  *      in subsequent cache images.
  *
- *      A value of 0 prevents prefetched entries from being included 
+ *      A value of 0 prevents prefetched entries from being included
  *      in cache images.
  *
  *      Positive integers restrict prefetched entries to the specified
  *      number of appearances.
- *      
+ *
  *      Note that the number of subsequent cache images that a prefetched
  *      entry has appeared in is tracked in an 8 bit field.  Thus, while
- *      H5AC__CACHE_IMAGE__ENTRY_AGEOUT__MAX can be increased from its  
- *      current value, any value in excess of 255 will be the functional 
+ *      H5AC__CACHE_IMAGE__ENTRY_AGEOUT__MAX can be increased from its
+ *      current value, any value in excess of 255 will be the functional
  *      equivalent of H5AC__CACHE_IMAGE__ENTRY_AGEOUT__NONE.
  *
  * flags: Unsigned integer containing flags controlling which aspects of the
- *	cache image functinality is actually executed.  The primary impetus 
- *	behind this field is to allow development of tests for partial 
- *	implementations that will require little if any modification to run 
- *	with the full implementation.  In normal operation, all flags should 
+ *	cache image functinality is actually executed.  The primary impetus
+ *	behind this field is to allow development of tests for partial
+ *	implementations that will require little if any modification to run
+ *	with the full implementation.  In normal operation, all flags should
  *	be set.
  *
  ****************************************************************************/
@@ -2196,7 +2196,7 @@ typedef struct H5C_auto_size_ctl_t {
 #define H5C_CI__SUPRESS_ENTRY_WRITES	((unsigned)0x0004)
 #define H5C_CI__WRITE_CACHE_IMAGE	((unsigned)0x0008)
 
-/* This #define must set all defined H5C_CI flags.  It is 
+/* This #define must set all defined H5C_CI flags.  It is
  * used in the default value for instances of H5C_cache_image_ctl_t.
  * This value will only be modified in test code.
  */
@@ -2242,7 +2242,7 @@ H5_DLL herr_t H5C_evict(H5F_t *f);
 H5_DLL herr_t H5C_expunge_entry(H5F_t *f, const H5C_class_t *type, haddr_t addr,
     unsigned flags);
 H5_DLL herr_t H5C_flush_cache(H5F_t *f, unsigned flags);
-H5_DLL herr_t H5C_flush_tagged_entries(H5F_t *f, haddr_t tag); 
+H5_DLL herr_t H5C_flush_tagged_entries(H5F_t *f, haddr_t tag);
 H5_DLL herr_t H5C_force_cache_image_load(H5F_t * f);
 H5_DLL herr_t H5C_evict_tagged_entries(H5F_t *f, haddr_t tag, hbool_t match_global);
 H5_DLL herr_t H5C_expunge_tag_type_metadata(H5F_t *f, haddr_t tag, int type_id, unsigned flags);
@@ -2270,7 +2270,7 @@ H5_DLL void * H5C_get_aux_ptr(const H5C_t *cache_ptr);
 H5_DLL herr_t H5C_image_stats(H5C_t * cache_ptr, hbool_t print_header);
 H5_DLL herr_t H5C_insert_entry(H5F_t *f, const H5C_class_t *type, haddr_t addr,
     void *thing, unsigned int flags);
-H5_DLL herr_t H5C_load_cache_image_on_next_protect(H5F_t *f, haddr_t addr, 
+H5_DLL herr_t H5C_load_cache_image_on_next_protect(H5F_t *f, haddr_t addr,
    hsize_t len, hbool_t rw);
 H5_DLL herr_t H5C_mark_entry_dirty(void *thing);
 H5_DLL herr_t H5C_mark_entry_clean(void *thing);
@@ -2309,7 +2309,7 @@ H5_DLL herr_t H5C_get_entry_ring(const H5F_t *f, haddr_t addr, H5C_ring_t *ring)
 H5_DLL herr_t H5C_unsettle_entry_ring(void *thing);
 H5_DLL herr_t H5C_unsettle_ring(H5F_t * f, H5C_ring_t ring);
 H5_DLL herr_t H5C_remove_entry(void *thing);
-H5_DLL herr_t H5C_cache_image_status(H5F_t * f, hbool_t *load_ci_ptr, 
+H5_DLL herr_t H5C_cache_image_status(H5F_t * f, hbool_t *load_ci_ptr,
     hbool_t *write_ci_ptr);
 H5_DLL hbool_t H5C_cache_image_pending(const H5C_t *cache_ptr);
 H5_DLL herr_t H5C_get_mdc_image_info(H5C_t *cache_ptr, haddr_t *image_addr, hsize_t *image_len);
diff --git a/src/H5Cquery.c b/src/H5Cquery.c
index a1267c5..9f1ec31 100644
--- a/src/H5Cquery.c
+++ b/src/H5Cquery.c
@@ -426,7 +426,7 @@ done:
  * Function:    H5C_get_mdc_image_info
  *
  * Purpose:	    To retrieve the address and size of the cache image in the file.
- *              
+ *
  * Return:      SUCCEED on success, and FAIL on failure.
  *
  * Programmer:  Vailin Choi; March 2017
@@ -447,7 +447,7 @@ H5C_get_mdc_image_info(H5C_t * cache_ptr, haddr_t *image_addr, hsize_t *image_le
         *image_addr = cache_ptr->image_addr;
     if(image_len)
         *image_len = cache_ptr->image_len;
-    
+
 done:
     FUNC_LEAVE_NOAPI(ret_value)
 } /* H5C_get_mdc_image_info() */
diff --git a/src/H5Ctag.c b/src/H5Ctag.c
index 807e68d..e92d0e4 100644
--- a/src/H5Ctag.c
+++ b/src/H5Ctag.c
@@ -56,16 +56,16 @@
 /* Typedef for tagged entry iterator callback context - evict tagged entries */
 typedef struct {
     H5F_t *f;                           /* File pointer for evicting entry */
-    hbool_t evicted_entries_last_pass;  /* Flag to indicate that an entry 
-                                         * was evicted when iterating over 
-                                         * cache 
+    hbool_t evicted_entries_last_pass;  /* Flag to indicate that an entry
+                                         * was evicted when iterating over
+                                         * cache
                                          */
-    hbool_t pinned_entries_need_evicted;/* Flag to indicate that a pinned 
-                                         * entry was attempted to be evicted 
+    hbool_t pinned_entries_need_evicted;/* Flag to indicate that a pinned
+                                         * entry was attempted to be evicted
                                          */
-    hbool_t skipped_pf_dirty_entries;   /* Flag indicating that one or more 
+    hbool_t skipped_pf_dirty_entries;   /* Flag indicating that one or more
                                          * entries marked prefetched_dirty
-                                         * were encountered and not 
+                                         * were encountered and not
                                          * evicted.
                                          */
 } H5C_tag_iter_evict_ctx_t;
@@ -113,10 +113,10 @@ H5FL_EXTERN(H5C_tag_info_t);
  * Function:    H5C_ignore_tags
  *
  * Purpose:     Override all assertion frameworks associated with making
- *              sure proper tags are applied to cache entries. 
+ *              sure proper tags are applied to cache entries.
  *
- *              NOTE: This should really only be used in tests that need 
- *              to access internal functions without going through 
+ *              NOTE: This should really only be used in tests that need
+ *              to access internal functions without going through
  *              standard API paths. Since tags are set inside dxpl_id's
  *              before coming into the cache, any external functions that
  *              use the internal library functions (i.e., tests) should
@@ -204,8 +204,8 @@ H5C_get_num_objs_corked(const H5C_t *cache_ptr)
  * Function:    H5C__tag_entry
  *
  * Purpose:     Tags an entry with the provided tag (contained in the API context).
- *              If sanity checking is enabled, this function will perform 
- *              validation that a proper tag is contained within the provided 
+ *              If sanity checking is enabled, this function will perform
+ *              validation that a proper tag is contained within the provided
  *              data access property list id before application.
  *
  * Return:      FAIL if error is detected, SUCCEED otherwise.
@@ -234,10 +234,10 @@ H5C__tag_entry(H5C_t *cache, H5C_cache_entry_t *entry)
 
     if(cache->ignore_tags) {
         /* if we're ignoring tags, it's because we're running
-           tests on internal functions and may not have inserted a tag 
+           tests on internal functions and may not have inserted a tag
            value into a given API context before creating some metadata. Thus,
            in this case only, if a tag value has not been set, we can
-           arbitrarily set it to something for the sake of passing the tests. 
+           arbitrarily set it to something for the sake of passing the tests.
            If the tag value is set, then we'll just let it get assigned without
            additional checking for correctness. */
         if(!H5F_addr_defined(tag))
@@ -399,7 +399,7 @@ H5C__iter_tagged_entries_real(H5C_t *cache, haddr_t tag, H5C_tag_iter_cb_t cb,
             /* Make callback for entry */
             if((cb)(entry, cb_ctx) != H5_ITER_CONT)
                 HGOTO_ERROR(H5E_CACHE, H5E_BADITER, FAIL, "tagged entry iteration callback failed")
-            
+
             /* Advance to next entry */
             entry = next_entry;
         } /* end while */
@@ -441,11 +441,11 @@ H5C__iter_tagged_entries(H5C_t *cache, haddr_t tag, hbool_t match_global,
         HGOTO_ERROR(H5E_CACHE, H5E_BADITER, FAIL, "iteration of tagged entries failed")
 
     /* Check for iterating over global metadata */
-    if(match_global) { 
+    if(match_global) {
         /* Iterate over the entries for SOHM entries */
         if(H5C__iter_tagged_entries_real(cache, H5AC__SOHM_TAG, cb, cb_ctx) < 0)
             HGOTO_ERROR(H5E_CACHE, H5E_BADITER, FAIL, "iteration of tagged entries failed")
-    
+
         /* Iterate over the entries for global heap entries */
         if(H5C__iter_tagged_entries_real(cache, H5AC__GLOBALHEAP_TAG, cb, cb_ctx) < 0)
             HGOTO_ERROR(H5E_CACHE, H5E_BADITER, FAIL, "iteration of tagged entries failed")
@@ -553,29 +553,29 @@ H5C_evict_tagged_entries(H5F_t * f, haddr_t tag, hbool_t match_global)
         /* Keep doing this until we have stopped evicted entries */
     } while(TRUE == ctx.evicted_entries_last_pass);
 
-    /* In most cases, fail if we have finished evicting entries and pinned 
-     * entries still need evicted 
+    /* In most cases, fail if we have finished evicting entries and pinned
+     * entries still need evicted
      *
-     * However, things can get strange if the file was opened R/O and 
-     * the file contains a cache image and the cache image contains dirty 
-     * entries.  
+     * However, things can get strange if the file was opened R/O and
+     * the file contains a cache image and the cache image contains dirty
+     * entries.
      *
-     * Since the file was opened read only, dirty entries in the cache 
+     * Since the file was opened read only, dirty entries in the cache
      * image were marked as clean when they were inserted into the metadata
      * cache.  This is necessary, as if they are marked dirty, the metadata
-     * cache will attempt to write them on file close, which is frowned 
+     * cache will attempt to write them on file close, which is frowned
      * upon when the file is opened R/O.
      *
-     * On the other hand, such entries (marked prefetched_dirty) must not 
+     * On the other hand, such entries (marked prefetched_dirty) must not
      * be evicted, as should the cache be asked to re-load them, the cache
      * will attempt to read them from the file, and at best load an outdated
      * version.
-     * 
-     * To avoid this, H5C__evict_tagged_entries_cb has been modified to 
-     * skip such entries.  However, by doing so, it may prevent pinned 
+     *
+     * To avoid this, H5C__evict_tagged_entries_cb has been modified to
+     * skip such entries.  However, by doing so, it may prevent pinned
      * entries from becoming unpinned.
      *
-     * Thus we must ignore ctx.pinned_entries_need_evicted if 
+     * Thus we must ignore ctx.pinned_entries_need_evicted if
      * ctx.skipped_pf_dirty_entries is TRUE.
      */
     if((!ctx.skipped_pf_dirty_entries) && (ctx.pinned_entries_need_evicted))
@@ -631,7 +631,7 @@ H5C__mark_tagged_entries_cb(H5C_cache_entry_t *entry, void H5_ATTR_UNUSED *_ctx)
  *
  *-------------------------------------------------------------------------
  */
-static herr_t 
+static herr_t
 H5C__mark_tagged_entries(H5C_t *cache, haddr_t tag)
 {
     herr_t ret_value = SUCCEED;         /* Return value */
@@ -698,16 +698,16 @@ H5C_verify_tag(int id, haddr_t tag)
             if(tag == H5AC__SUPERBLOCK_TAG)
                 HGOTO_ERROR(H5E_CACHE, H5E_CANTTAG, FAIL, "H5AC__SUPERBLOCK_TAG applied to non-superblock entry")
         } /* end else */
-    
+
         /* Free Space Manager */
         if(tag == H5AC__FREESPACE_TAG && ((id != H5AC_FSPACE_HDR_ID) && (id != H5AC_FSPACE_SINFO_ID)))
                 HGOTO_ERROR(H5E_CACHE, H5E_CANTTAG, FAIL, "H5AC__FREESPACE_TAG applied to non-freespace entry")
-    
+
         /* SOHM */
         if((id == H5AC_SOHM_TABLE_ID) || (id == H5AC_SOHM_LIST_ID))
             if(tag != H5AC__SOHM_TAG)
                 HGOTO_ERROR(H5E_CACHE, H5E_CANTTAG, FAIL, "sohm entry not tagged with H5AC__SOHM_TAG")
-    
+
         /* Global Heap */
         if(id == H5AC_GHEAP_ID) {
             if(tag != H5AC__GLOBALHEAP_TAG)
@@ -783,7 +783,7 @@ done:
  *-------------------------------------------------------------------------
  */
 herr_t
-H5C_retag_entries(H5C_t *cache, haddr_t src_tag, haddr_t dest_tag) 
+H5C_retag_entries(H5C_t *cache, haddr_t src_tag, haddr_t dest_tag)
 {
     H5C_tag_info_t *tag_info;	        /* Points to a tag info struct */
     herr_t ret_value = SUCCEED;         /* Return value */
@@ -860,7 +860,7 @@ done:
  *
  *-------------------------------------------------------------------------
  */
-herr_t 
+herr_t
 H5C_expunge_tag_type_metadata(H5F_t *f, haddr_t tag, int type_id, unsigned flags)
 {
     H5C_t *cache;                       /* Pointer to cache structure */
@@ -904,7 +904,7 @@ done:
  *
  *-------------------------------------------------------------------------
  */
-herr_t 
+herr_t
 H5C_get_tag(const void *thing, haddr_t *tag /*OUT*/)
 {
     const H5C_cache_entry_t *entry = (const H5C_cache_entry_t *)thing;  /* Pointer to cache entry */
diff --git a/src/H5D.c b/src/H5D.c
index 61a40df..37b3b39 100644
--- a/src/H5D.c
+++ b/src/H5D.c
@@ -332,7 +332,7 @@ H5Dclose(hid_t dset_id)
         HGOTO_ERROR(H5E_ARGS, H5E_BADTYPE, FAIL, "not a dataset ID")
 
     /* Decrement the counter on the dataset.  It will be freed if the count
-     * reaches zero.  
+     * reaches zero.
      */
     if(H5I_dec_app_ref_always_close(dset_id) < 0)
         HGOTO_ERROR(H5E_DATASET, H5E_CANTDEC, FAIL, "can't decrement count on dataset ID")
@@ -814,7 +814,7 @@ H5Dflush(hid_t dset_id)
 
     FUNC_ENTER_API(FAIL)
     H5TRACE1("e", "i", dset_id);
-    
+
     /* Check args */
     if(NULL == (vol_obj = (H5VL_object_t *)H5I_object_verify(dset_id, H5I_DATASET)))
         HGOTO_ERROR(H5E_ARGS, H5E_BADTYPE, FAIL, "dset_id parameter is not a valid dataset identifier")
@@ -873,7 +873,7 @@ done:
 /*-------------------------------------------------------------------------
  * Function:    H5Dformat_convert (Internal)
  *
- * Purpose:     For chunked: 
+ * Purpose:     For chunked:
  *                  Convert the chunk indexing type to version 1 B-tree if not
  *              For compact/contiguous:
  *                  Downgrade layout version to 3 if greater than 3
@@ -892,7 +892,7 @@ H5Dformat_convert(hid_t dset_id)
 {
     H5VL_object_t  *vol_obj;                   /* Dataset for this operation   */
     herr_t          ret_value = SUCCEED;    /* Return value                 */
-    
+
     FUNC_ENTER_API(FAIL)
     H5TRACE1("e", "i", dset_id);
 
diff --git a/src/H5Dbtree2.c b/src/H5Dbtree2.c
index 56554f8..ae98654 100644
--- a/src/H5Dbtree2.c
+++ b/src/H5Dbtree2.c
@@ -11,7 +11,7 @@
  * help@hdfgroup.org.                                                        *
  * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * */
 
-/* 
+/*
  *
  * Purpose: v2 B-tree indexing for chunked datasets with > 1 unlimited dimensions.
  *   Each dataset chunk in the b-tree is identified by its dimensional offset.
@@ -106,7 +106,7 @@ static int H5D__bt2_idx_iterate_cb(const void *_record, void *_udata);
 /* Callback for H5B2_find() which is called in H5D__bt2_idx_get_addr() */
 static herr_t H5D__bt2_found_cb(const void *nrecord, void *op_data);
 
-/*  
+/*
  * Callback for H5B2_remove() and H5B2_delete() which is called
  * in H5D__bt2_idx_remove() and H5D__bt2_idx_delete().
  */
@@ -252,7 +252,7 @@ H5D__bt2_crt_context(void *_udata)
     H5MM_memcpy(my_dim, udata->dim, H5O_LAYOUT_NDIMS * sizeof(uint32_t));
     ctx->dim = my_dim;
 
-    /* 
+    /*
      * Compute the size required for encoding the size of a chunk,
      * allowing for an extra byte, in case the filter makes the chunk larger.
      */
@@ -292,7 +292,7 @@ H5D__bt2_dst_context(void *_ctx)
 
     /* Free array for chunk dimension sizes */
     if(ctx->dim)
-	(void)H5FL_ARR_FREE(uint32_t, ctx->dim); 
+	(void)H5FL_ARR_FREE(uint32_t, ctx->dim);
     /* Release callback context */
     ctx = H5FL_FREE(H5D_bt2_ctx_t, ctx);
 
@@ -569,7 +569,7 @@ H5D__bt2_filt_debug(FILE *stream, int indent, int fwidth,
     const H5D_chunk_rec_t *record = (const H5D_chunk_rec_t *)_record;   /* The native record */
     const H5D_bt2_ctx_t *ctx = (const H5D_bt2_ctx_t *)_ctx; 	/* Callback context */
     unsigned u;		/* Local index variable */
- 
+
     FUNC_ENTER_STATIC_NOERR
 
     /* Sanity checks */
@@ -735,9 +735,9 @@ done:
 
 
 /*-------------------------------------------------------------------------
- * Function:	H5D__bt2_idx_create 
+ * Function:	H5D__bt2_idx_create
  *
- * Purpose:	Create the v2 B-tree for tracking dataset chunks 
+ * Purpose:	Create the v2 B-tree for tracking dataset chunks
  *
  * Return:      SUCCEED/FAIL
  *
@@ -769,7 +769,7 @@ H5D__bt2_idx_create(const H5D_chk_idx_info_t *idx_info)
     if(idx_info->pline->nused > 0) {
 	unsigned chunk_size_len;        /* Size of encoded chunk size */
 
-        /* 
+        /*
 	 * Compute the size required for encoding the size of a chunk,
          * allowing for an extra byte, in case the filter makes the chunk larger.
          */
@@ -837,7 +837,7 @@ H5D__bt2_idx_is_space_alloc(const H5O_storage_chunk_t *storage)
  * Function:	H5D__bt2_mod_cb
  *
  * Purpose:	Modify record for dataset chunk when it is found in a v2 B-tree.
- * 		This is the callback for H5B2_modify() which is called in 
+ * 		This is the callback for H5B2_modify() which is called in
  *		H5D__bt2_idx_insert().
  *
  * Return:	Success:	non-negative
@@ -879,7 +879,7 @@ H5D__bt2_mod_cb(void *_record, void *_op_data, hbool_t *changed)
  * Function:	H5D__bt2_idx_insert
  *
  * Purpose:	Insert chunk address into the indexing structure.
- *		A non-filtered chunk: 
+ *		A non-filtered chunk:
  *		  Should not exist
  *		  Allocate the chunk and pass chunk address back up
  *		A filtered chunk:
@@ -954,7 +954,7 @@ done:
  * Function:	H5D__bt2_found_cb
  *
  * Purpose:	Retrieve record for dataset chunk when it is found in a v2 B-tree.
- * 		This is the callback for H5B2_find() which is called in 
+ * 		This is the callback for H5B2_find() which is called in
  *		H5D__bt2_idx_get_addr() and H5D__bt2_idx_insert().
  *
  * Return:	Success:	non-negative
@@ -1073,7 +1073,7 @@ done:
  * Purpose:	Translate the B-tree specific chunk record into a generic
  *              form and make the callback to the generic chunk callback
  *              routine.
- * 		This is the callback for H5B2_iterate() which is called in 
+ * 		This is the callback for H5B2_iterate() which is called in
  *		H5D__bt2_idx_iterate().
  *
  * Return:	Success:	Non-negative
@@ -1163,7 +1163,7 @@ done:
  *
  * Purpose:	Free space for 'dataset chunk' object as v2 B-tree
  *             	is being deleted or v2 B-tree node is removed.
- * 		This is the callback for H5B2_remove() and H5B2_delete() which 
+ * 		This is the callback for H5B2_remove() and H5B2_delete() which
  *		which are called in H5D__bt2_idx_remove() and H5D__bt2_idx_delete().
  *
  * Return:	Success:	non-negative
diff --git a/src/H5Dcontig.c b/src/H5Dcontig.c
index e48c3b3..655f660 100644
--- a/src/H5Dcontig.c
+++ b/src/H5Dcontig.c
@@ -843,7 +843,7 @@ H5D__contig_readvv_sieve_cb(hsize_t dst_off, hsize_t src_off, size_t len,
                  * the end of the data element, and don't read more than
                  * the buffer size.
                  */
-                min = MIN3(rel_eoa - dset_contig->sieve_loc, max_data, dset_contig->sieve_buf_size); 
+                min = MIN3(rel_eoa - dset_contig->sieve_loc, max_data, dset_contig->sieve_buf_size);
                 H5_CHECKED_ASSIGN(dset_contig->sieve_size, size_t, min, hsize_t);
 
                 /* Read the new sieve buffer */
@@ -1038,7 +1038,7 @@ H5D__contig_writevv_sieve_cb(hsize_t dst_off, hsize_t src_off, size_t len,
             max_data = store_contig->dset_size - dst_off;
 
             /* Compute the size of the sieve buffer */
-            min = MIN3(rel_eoa - dset_contig->sieve_loc, max_data, dset_contig->sieve_buf_size); 
+            min = MIN3(rel_eoa - dset_contig->sieve_loc, max_data, dset_contig->sieve_buf_size);
             H5_CHECKED_ASSIGN(dset_contig->sieve_size, size_t, min, hsize_t);
 
             /* Check if there is any point in reading the data from the file */
@@ -1154,7 +1154,7 @@ H5D__contig_writevv_sieve_cb(hsize_t dst_off, hsize_t src_off, size_t len,
                      * the end of the data element, and don't read more than
                      * the buffer size.
                      */
-                    min = MIN3(rel_eoa - dset_contig->sieve_loc, max_data, dset_contig->sieve_buf_size); 
+                    min = MIN3(rel_eoa - dset_contig->sieve_loc, max_data, dset_contig->sieve_buf_size);
                     H5_CHECKED_ASSIGN(dset_contig->sieve_size, size_t, min, hsize_t);
 
                     /* Check if there is any point in reading the data from the file */
diff --git a/src/H5Dearray.c b/src/H5Dearray.c
index b23ac46..eaa8c46 100644
--- a/src/H5Dearray.c
+++ b/src/H5Dearray.c
@@ -615,7 +615,7 @@ H5D__earray_filt_debug(FILE *stream, int indent, int fwidth, hsize_t idx,
  *		Failure:	NULL
  *
  * Programmer:	Vailin Choi; July 2010
- *		
+ *
  *-------------------------------------------------------------------------
  */
 static void *
@@ -933,7 +933,7 @@ H5D__earray_idx_create(const H5D_chk_idx_info_t *idx_info)
     /* General parameters */
     if(idx_info->pline->nused > 0) {
         unsigned chunk_size_len;        /* Size of encoded chunk size */
-        
+
         /* Compute the size required for encoding the size of a chunk, allowing
          *      for an extra byte, in case the filter makes the chunk larger.
          */
@@ -1349,7 +1349,7 @@ H5D__earray_idx_iterate(const H5D_chk_idx_info_t *idx_info,
         } /* end if */
 	udata.cb = chunk_cb;
 	udata.udata = chunk_udata;
-	
+
         /* Iterate over the extensible array elements */
 	if((ret_value = H5EA_iterate(ea, H5D__earray_idx_iterate_cb, &udata)) < 0)
 	    HERROR(H5E_DATASET, H5E_BADITER, "unable to iterate over fixed array chunk index");
diff --git a/src/H5Dfarray.c b/src/H5Dfarray.c
index 2d85e3b..cbaa52d 100644
--- a/src/H5Dfarray.c
+++ b/src/H5Dfarray.c
@@ -14,8 +14,8 @@
 /* Programmer: 	Vailin Choi <vchoi@hdfgroup.org>
  *	       	Thursday, April 30, 2009
  *
- * Purpose:	Fixed array indexed (chunked) I/O functions.  
- *		The chunk coordinate is mapped as an index into an array of 
+ * Purpose:	Fixed array indexed (chunked) I/O functions.
+ *		The chunk coordinate is mapped as an index into an array of
  *		disk addresses for the chunks.
  *
  */
@@ -910,7 +910,7 @@ H5D__farray_idx_create(const H5D_chk_idx_info_t *idx_info)
     /* Set up the user data */
     udata.f = idx_info->f;
     udata.chunk_size = idx_info->layout->size;
-    
+
     /* Create the fixed array for the chunk index */
     if(NULL == (idx_info->storage->u.farray.fa = H5FA_create(idx_info->f, &cparam, &udata)))
 	HGOTO_ERROR(H5E_DATASET, H5E_CANTINIT, FAIL, "can't create fixed array")
@@ -961,7 +961,7 @@ H5D__farray_idx_is_space_alloc(const H5O_storage_chunk_t *storage)
  * Return:	Non-negative on success/Negative on failure
  *
  * Programmer:	Vailin Choi; 5 May 2014
- *              
+ *
  *-------------------------------------------------------------------------
  */
 static herr_t
@@ -1224,7 +1224,7 @@ H5D__farray_idx_iterate(const H5D_chk_idx_info_t *idx_info,
         } /* end if */
 	udata.cb = chunk_cb;
 	udata.udata = chunk_udata;
-	
+
         /* Iterate over the fixed array elements */
 	if((ret_value = H5FA_iterate(fa, H5D__farray_idx_iterate_cb, &udata)) < 0)
 	    HERROR(H5E_DATASET, H5E_BADITER, "unable to iterate over fixed array chunk index");
diff --git a/src/H5Dfill.c b/src/H5Dfill.c
index f5a5238..94c7b1c 100644
--- a/src/H5Dfill.c
+++ b/src/H5Dfill.c
@@ -565,7 +565,7 @@ done:
  */
 herr_t
 H5D__fill_refill_vl(H5D_fill_buf_info_t *fb_info, size_t nelmts)
-{    
+{
     herr_t	ret_value = SUCCEED;	/* Return value */
     void * buf = NULL;              /* Temporary fill buffer */
 
diff --git a/src/H5Dio.c b/src/H5Dio.c
index 3d49df7..84b7e7a 100644
--- a/src/H5Dio.c
+++ b/src/H5Dio.c
@@ -321,7 +321,7 @@ done:
 /*-------------------------------------------------------------------------
  * Function:    H5Dwrite_chunk
  *
- * Purpose:     Writes an entire chunk to the file directly.	
+ * Purpose:     Writes an entire chunk to the file directly.
  *
  * Return:      Non-negative on success/Negative on failure
  *
@@ -331,13 +331,13 @@ done:
  *-------------------------------------------------------------------------
  */
 herr_t
-H5Dwrite_chunk(hid_t dset_id, hid_t dxpl_id, uint32_t filters, const hsize_t *offset, 
+H5Dwrite_chunk(hid_t dset_id, hid_t dxpl_id, uint32_t filters, const hsize_t *offset,
          size_t data_size, const void *buf)
 {
     H5VL_object_t  *vol_obj = NULL;
     uint32_t        data_size_32;                   /* Chunk data size (limited to 32-bits currently) */
     herr_t          ret_value = SUCCEED;            /* Return value */
-    
+
     FUNC_ENTER_API(FAIL)
     H5TRACE6("e", "iiIu*hz*x", dset_id, dxpl_id, filters, offset, data_size, buf);
 
diff --git a/src/H5Dmpio.c b/src/H5Dmpio.c
index 91557c3..492902b 100644
--- a/src/H5Dmpio.c
+++ b/src/H5Dmpio.c
@@ -364,13 +364,13 @@ H5D__mpio_opt_possible(const H5D_io_info_t *io_info, const H5S_t *file_space,
 
     /* Check to see if the process is reading the entire dataset */
     if(H5S_GET_SELECT_TYPE(file_space) != H5S_SEL_ALL)
-        local_cause[1] |= H5D_MPIO_RANK0_NOT_H5S_ALL; 
+        local_cause[1] |= H5D_MPIO_RANK0_NOT_H5S_ALL;
     /* Only perform this optimization for contigous datasets, currently */
     else if(H5D_CONTIGUOUS != io_info->dset->shared->layout.type)
-        /* Flag to do a MPI_Bcast of the data from one proc instead of 
+        /* Flag to do a MPI_Bcast of the data from one proc instead of
          * having all the processes involved in the collective I/O.
          */
-        local_cause[1] |= H5D_MPIO_RANK0_NOT_CONTIGUOUS; 
+        local_cause[1] |= H5D_MPIO_RANK0_NOT_CONTIGUOUS;
     else if((is_vl_storage = H5T_is_vl_storage(type_info->dset_type)) < 0)
         local_cause[0] |= H5D_MPIO_ERROR_WHILE_CHECKING_COLLECTIVE_POSSIBLE;
     else if(is_vl_storage)
@@ -394,7 +394,7 @@ H5D__mpio_opt_possible(const H5D_io_info_t *io_info, const H5S_t *file_space,
                 dset_size = ((hsize_t)snelmts) * type_size;
 
                /* If the size of the dataset is less than 2GB then do an MPI_Bcast
-                * of the data from one process instead of having all the processes 
+                * of the data from one process instead of having all the processes
                 * involved in the collective I/O.
                 */
                 if(dset_size > ((hsize_t)(2.0F * H5_GB) - 1))
@@ -402,7 +402,7 @@ H5D__mpio_opt_possible(const H5D_io_info_t *io_info, const H5S_t *file_space,
             } /* end else */
         } /* end else */
     } /* end else */
-    
+
     /* Check for independent I/O */
     if(local_cause[0] & H5D_MPIO_SET_INDEPENDENT)
         global_cause[0] = local_cause[0];
@@ -812,7 +812,7 @@ H5D__chunk_collective_io(H5D_io_info_t *io_info, const H5D_type_info_t *type_inf
         io_option = H5D_ONE_LINK_CHUNK_IO;      /*no opt*/
     /* direct request to multi-chunk-io */
     else if(H5FD_MPIO_CHUNK_MULTI_IO == chunk_opt_mode)
-        io_option = H5D_MULTI_CHUNK_IO;         
+        io_option = H5D_MULTI_CHUNK_IO;
     /* via default path. branch by num threshold */
     else {
         unsigned one_link_chunk_io_threshold;   /* Threshold to use single collective I/O for all chunks */
@@ -1123,9 +1123,9 @@ if(H5DEBUG(D))
 
             /* Obtain MPI derived datatype from all individual chunks */
             for(u = 0; u < num_chunk; u++) {
-                hsize_t *permute_map = NULL; /* array that holds the mapping from the old, 
-                                                out-of-order displacements to the in-order 
-                                                displacements of the MPI datatypes of the 
+                hsize_t *permute_map = NULL; /* array that holds the mapping from the old,
+                                                out-of-order displacements to the in-order
+                                                displacements of the MPI datatypes of the
                                                 point selection of the file space */
                 hbool_t is_permuted = FALSE;
 
@@ -1135,8 +1135,8 @@ if(H5DEBUG(D))
                  *              where it will be freed.
                  */
                 if(H5S_mpio_space_type(chunk_addr_info_array[u].chunk_info.fspace,
-                                       type_info->src_type_size, 
-                                       &chunk_ftype[u], /* OUT: datatype created */ 
+                                       type_info->src_type_size,
+                                       &chunk_ftype[u], /* OUT: datatype created */
                                        &chunk_mpi_file_counts[u], /* OUT */
                                        &(chunk_mft_is_derived_array[u]), /* OUT */
                                        TRUE, /* this is a file space,
@@ -1154,9 +1154,9 @@ if(H5DEBUG(D))
                 if(is_permuted)
                     HDassert(permute_map);
                 if(H5S_mpio_space_type(chunk_addr_info_array[u].chunk_info.mspace,
-                                       type_info->dst_type_size, &chunk_mtype[u], 
-                                       &chunk_mpi_mem_counts[u], 
-                                       &(chunk_mbt_is_derived_array[u]), 
+                                       type_info->dst_type_size, &chunk_mtype[u],
+                                       &chunk_mpi_mem_counts[u],
+                                       &(chunk_mbt_is_derived_array[u]),
                                        FALSE, /* this is a memory
                                                  space, so if the file
                                                  space is not
@@ -2016,9 +2016,9 @@ H5D__inter_collective_io(H5D_io_info_t *io_info, const H5D_type_info_t *type_inf
 
     if((file_space != NULL) && (mem_space != NULL)) {
         int  mpi_file_count;         /* Number of file "objects" to transfer */
-        hsize_t *permute_map = NULL; /* array that holds the mapping from the old, 
-                                        out-of-order displacements to the in-order 
-                                        displacements of the MPI datatypes of the 
+        hsize_t *permute_map = NULL; /* array that holds the mapping from the old,
+                                        out-of-order displacements to the in-order
+                                        displacements of the MPI datatypes of the
                                         point selection of the file space */
         hbool_t is_permuted = FALSE;
 
@@ -2027,8 +2027,8 @@ H5D__inter_collective_io(H5D_io_info_t *io_info, const H5D_type_info_t *type_inf
          *              and will be fed into the next call to H5S_mpio_space_type
          *              where it will be freed.
          */
-        if(H5S_mpio_space_type(file_space, type_info->src_type_size, 
-                               &mpi_file_type, &mpi_file_count, &mft_is_derived, /* OUT: datatype created */  
+        if(H5S_mpio_space_type(file_space, type_info->src_type_size,
+                               &mpi_file_type, &mpi_file_count, &mft_is_derived, /* OUT: datatype created */
                                TRUE, /* this is a file space, so
                                         permute the datatype if the
                                         point selection is out of
@@ -2037,13 +2037,13 @@ H5D__inter_collective_io(H5D_io_info_t *io_info, const H5D_type_info_t *type_inf
                                                 the permutation of
                                                 points selected in
                                                 case they are out of
-                                                order */ 
+                                                order */
                                &is_permuted /* OUT */) < 0)
             HGOTO_ERROR(H5E_DATASPACE, H5E_BADTYPE, FAIL, "couldn't create MPI file type")
         /* Sanity check */
         if(is_permuted)
             HDassert(permute_map);
-        if(H5S_mpio_space_type(mem_space, type_info->src_type_size, 
+        if(H5S_mpio_space_type(mem_space, type_info->src_type_size,
                                &mpi_buf_type, &mpi_buf_count, &mbt_is_derived, /* OUT: datatype created */
                                FALSE, /* this is a memory space, so if
                                          the file space is not
@@ -2055,7 +2055,7 @@ H5D__inter_collective_io(H5D_io_info_t *io_info, const H5D_type_info_t *type_inf
                                                generated by the
                                                file_space selection
                                                and applied to the
-                                               memory selection */, 
+                                               memory selection */,
                                &is_permuted /* IN */) < 0)
             HGOTO_ERROR(H5E_DATASPACE, H5E_BADTYPE, FAIL, "couldn't create MPI buffer type")
         /* Sanity check */
@@ -2627,7 +2627,7 @@ H5D__construct_filtered_io_info_list(const H5D_io_info_t *io_info, const H5D_typ
             local_info_array[i].num_writers = 0;
             local_info_array[i].owners.original_owner = local_info_array[i].owners.new_owner = mpi_rank;
             local_info_array[i].buf = NULL;
-            
+
             local_info_array[i].async_info.num_receive_requests = 0;
             local_info_array[i].async_info.receive_buffer_array = NULL;
             local_info_array[i].async_info.receive_requests_array = NULL;
diff --git a/src/H5Dnone.c b/src/H5Dnone.c
index 2093512..5ba3f5b 100644
--- a/src/H5Dnone.c
+++ b/src/H5Dnone.c
@@ -14,7 +14,7 @@
 /* Programmer: 	Vailin Choi <vchoi@hdfgroup.org>
  *	       	September 2010
  *
- * Purpose:	Implicit (Non Index) chunked I/O functions.  
+ * Purpose:	Implicit (Non Index) chunked I/O functions.
  *		This is used when the dataset is:
  *			extendible but with fixed max. dims
  *			with early allocation
@@ -114,8 +114,8 @@ const H5D_chunk_ops_t H5D_COPS_NONE[1] = {{
  * Function:	H5D__none_idx_create
  *
  * Purpose:	Allocate memory for the maximum # of chunks in the dataset.
- *		
- * Return:	Non-negative on success 
+ *
+ * Return:	Non-negative on success
  *		Negative on failure.
  *
  * Programmer:	Vailin Choi; September 2010
@@ -472,7 +472,7 @@ H5D__none_idx_reset(H5O_storage_chunk_t *storage, hbool_t reset_addr)
 /*-------------------------------------------------------------------------
  * Function:	H5D__none_idx_dump
  *
- * Purpose:	Dump 
+ * Purpose:	Dump
  *
  * Return:	Non-negative on success/Negative on failure
  *
diff --git a/src/H5Dpublic.h b/src/H5Dpublic.h
index 281da81..b6ec06d 100644
--- a/src/H5Dpublic.h
+++ b/src/H5Dpublic.h
@@ -150,7 +150,7 @@ H5_DLL herr_t H5Dread(hid_t dset_id, hid_t mem_type_id, hid_t mem_space_id,
 			hid_t file_space_id, hid_t plist_id, void *buf/*out*/);
 H5_DLL herr_t H5Dwrite(hid_t dset_id, hid_t mem_type_id, hid_t mem_space_id,
 			 hid_t file_space_id, hid_t plist_id, const void *buf);
-H5_DLL herr_t H5Dwrite_chunk(hid_t dset_id, hid_t dxpl_id, uint32_t filters, 
+H5_DLL herr_t H5Dwrite_chunk(hid_t dset_id, hid_t dxpl_id, uint32_t filters,
             const hsize_t *offset, size_t data_size, const void *buf);
 H5_DLL herr_t H5Dread_chunk(hid_t dset_id, hid_t dxpl_id,
             const hsize_t *offset, uint32_t *filters, void *buf);
@@ -193,7 +193,7 @@ H5_DLL herr_t H5Dget_chunk_index_type(hid_t did, H5D_chunk_index_t *idx_type);
 #define H5D_XFER_DIRECT_CHUNK_READ_FLAG_NAME        "direct_chunk_read_flag"
 #define H5D_XFER_DIRECT_CHUNK_READ_OFFSET_NAME      "direct_chunk_read_offset"
 #define H5D_XFER_DIRECT_CHUNK_READ_FILTERS_NAME     "direct_chunk_read_filters"
- 
+
 /* Typedefs */
 
 
diff --git a/src/H5Dsingle.c b/src/H5Dsingle.c
index 8efa771..33274bb 100644
--- a/src/H5Dsingle.c
+++ b/src/H5Dsingle.c
@@ -14,7 +14,7 @@
 /* Programmer: 	Vailin Choi <vchoi@hdfgroup.org>
  *	       	May 2011; updated 10/2015
  *
- * Purpose:	Single Chunk I/O functions.  
+ * Purpose:	Single Chunk I/O functions.
  *		This is used when the dataset has only 1 chunk (with or without filter):
  *			cur_dims[] is equal to max_dims[] is equal to the chunk dims[]
  *		non-filter chunk record: [address of the chunk]
@@ -150,8 +150,8 @@ H5D__single_idx_init(const H5D_chk_idx_info_t *idx_info,
  * Function:	H5D__single_idx_create
  *
  * Purpose:	Set up Single Chunk Index: filtered or non-filtered
- *		
- * Return:	Non-negative on success 
+ *
+ * Return:	Non-negative on success
  *		Negative on failure.
  *
  * Programmer:	Vailin Choi; July 2011
diff --git a/src/H5E.c b/src/H5E.c
index 07eaf18..f204864 100644
--- a/src/H5E.c
+++ b/src/H5E.c
@@ -364,7 +364,7 @@ H5E__get_stack(void)
         /* No associated value with current thread - create one */
 #ifdef H5_HAVE_WIN_THREADS
         /* Win32 has to use LocalAlloc to match the LocalFree in DllMain */
-        estack = (H5E_t *)LocalAlloc(LPTR, sizeof(H5E_t)); 
+        estack = (H5E_t *)LocalAlloc(LPTR, sizeof(H5E_t));
 #else
         /* Use HDmalloc here since this has to match the HDfree in the
          * destructor and we want to avoid the codestack there.
@@ -1045,7 +1045,7 @@ done:
  *
  * Programmer:	Raymond Lu
  *              Friday, July 15, 2003
- * 
+ *
  *-------------------------------------------------------------------------
  */
 herr_t
diff --git a/src/H5EAcache.c b/src/H5EAcache.c
index 1d182a4..affa127 100644
--- a/src/H5EAcache.c
+++ b/src/H5EAcache.c
@@ -117,7 +117,7 @@ static herr_t H5EA__cache_dblk_page_get_initial_load_size(void *udata, size_t *i
 static htri_t H5EA__cache_dblk_page_verify_chksum(const void *image_ptr, size_t len, void *udata_ptr);
 static void *H5EA__cache_dblk_page_deserialize(const void *image, size_t len,
     void *udata, hbool_t *dirty);
-static herr_t H5EA__cache_dblk_page_image_len(const void *thing, 
+static herr_t H5EA__cache_dblk_page_image_len(const void *thing,
     size_t *image_len);
 static herr_t H5EA__cache_dblk_page_serialize(const H5F_t *f, void *image, size_t len,
     void *thing);
@@ -1467,12 +1467,12 @@ H5EA__cache_dblock_get_initial_load_size(void *_udata, size_t *image_len))
     HDmemset(&dblock, 0, sizeof(dblock));
 
     /* need to set:
-     * 
+     *
      *    dblock.hdr
      *    dblock.npages
      *    dblock.nelmts
      *
-     * before we invoke either H5EA_DBLOCK_PREFIX_SIZE() or 
+     * before we invoke either H5EA_DBLOCK_PREFIX_SIZE() or
      * H5EA_DBLOCK_SIZE().
      */
     dblock.hdr = udata->hdr;
@@ -1564,7 +1564,7 @@ H5EA__cache_dblock_deserialize(const void *_image, size_t H5_ATTR_NDEBUG_UNUSED
     if(NULL == (dblock = H5EA__dblock_alloc(udata->hdr, udata->parent, udata->nelmts)))
 	H5E_THROW(H5E_CANTALLOC, "memory allocation failed for extensible array data block")
 
-    HDassert(((!dblock->npages) && (len == H5EA_DBLOCK_SIZE(dblock))) || 
+    HDassert(((!dblock->npages) && (len == H5EA_DBLOCK_SIZE(dblock))) ||
              (len == H5EA_DBLOCK_PREFIX_SIZE(dblock)));
 
     /* Set the extensible array data block's information */
diff --git a/src/H5EApkg.h b/src/H5EApkg.h
index 0adcde2..bb3f39c 100644
--- a/src/H5EApkg.h
+++ b/src/H5EApkg.h
@@ -219,10 +219,10 @@ typedef struct H5EA_hdr_t {
                                          * of the extensible array header.
  					 *
  					 * The field is used to avoid duplicate
-					 * setups of the flush dependency 
-					 * relationship, and to allow the 
+					 * setups of the flush dependency
+					 * relationship, and to allow the
 					 * extensible array header to destroy
-					 * the flush dependency on receipt of 
+					 * the flush dependency on receipt of
 					 * an eviction notification from the
 					 * metadata cache.
 					 */
@@ -448,7 +448,7 @@ H5_DLL herr_t H5EA__dblock_dest(H5EA_dblock_t *dblock);
 H5_DLL H5EA_dblk_page_t *H5EA__dblk_page_alloc(H5EA_hdr_t *hdr, H5EA_sblock_t *parent);
 H5_DLL herr_t H5EA__dblk_page_create(H5EA_hdr_t *hdr, H5EA_sblock_t *parent,
     haddr_t addr);
-H5_DLL H5EA_dblk_page_t *H5EA__dblk_page_protect(H5EA_hdr_t *hdr, 
+H5_DLL H5EA_dblk_page_t *H5EA__dblk_page_protect(H5EA_hdr_t *hdr,
     H5EA_sblock_t *parent, haddr_t dblk_page_addr, unsigned flags);
 H5_DLL herr_t H5EA__dblk_page_unprotect(H5EA_dblk_page_t *dblk_page,
     unsigned cache_flags);
diff --git a/src/H5EAtest.c b/src/H5EAtest.c
index 58e255a..8926d6a 100644
--- a/src/H5EAtest.c
+++ b/src/H5EAtest.c
@@ -346,10 +346,10 @@ END_FUNC(STATIC)  /* end H5EA__test_debug() */
  * Function:    H5EA__test_crt_dbg_context
  *
  * Purpose:     Create context for debugging callback
- *              
+ *
  * Return:      Success:        non-NULL
  *              Failure:        NULL
- *              
+ *
  * Programmer:	Vailin Choi; August 2010
  *
  *-------------------------------------------------------------------------
@@ -357,10 +357,10 @@ END_FUNC(STATIC)  /* end H5EA__test_debug() */
 BEGIN_FUNC(STATIC, ERR,
 void *, NULL, NULL,
 H5EA__test_crt_dbg_context(H5F_t H5_ATTR_UNUSED *f, haddr_t H5_ATTR_UNUSED obj_addr))
-    
+
     /* Local variables */
     H5EA__ctx_cb_t *ctx;              /* Context for callbacks */
-    
+
     /* Allocate new context structure */
     if(NULL == (ctx = H5FL_MALLOC(H5EA__ctx_cb_t)))
         H5E_THROW(H5E_CANTALLOC, "can't allocate extensible array client callback context")
diff --git a/src/H5Eint.c b/src/H5Eint.c
index 2aedc17..fe72449 100644
--- a/src/H5Eint.c
+++ b/src/H5Eint.c
@@ -994,7 +994,7 @@ H5E_dump_api_stack(hbool_t is_api)
 #ifdef H5_NO_DEPRECATED_SYMBOLS
             if(estack->auto_op.func2)
                 (void)((estack->auto_op.func2)(H5E_DEFAULT, estack->auto_data));
-#else /* H5_NO_DEPRECATED_SYMBOLS */ 
+#else /* H5_NO_DEPRECATED_SYMBOLS */
         if(estack->auto_op.vers == 1) {
             if(estack->auto_op.func1)
                 (void)((estack->auto_op.func1)(estack->auto_data));
diff --git a/src/H5Epkg.h b/src/H5Epkg.h
index 86b5b73..83f3816 100644
--- a/src/H5Epkg.h
+++ b/src/H5Epkg.h
@@ -79,7 +79,7 @@ typedef struct {
 typedef struct {
     H5E_auto2_t func2;      /* Only the new style callback function is available. */
 } H5E_auto_op_t;
-#endif /* H5_NO_DEPRECATED_SYMBOLS */ 
+#endif /* H5_NO_DEPRECATED_SYMBOLS */
 
 /* Some syntactic sugar to make the compiler happy with two different kinds of callbacks */
 typedef struct {
diff --git a/src/H5FAcache.c b/src/H5FAcache.c
index 922153c..8f5e696 100644
--- a/src/H5FAcache.c
+++ b/src/H5FAcache.c
@@ -669,7 +669,7 @@ H5FA__cache_dblock_deserialize(const void *_image, size_t H5_ATTR_NDEBUG_UNUSED
     if(NULL == (dblock = H5FA__dblock_alloc(udata->hdr)))
         H5E_THROW(H5E_CANTALLOC, "memory allocation failed for fixed array data block")
 
-    HDassert(((!dblock->npages) && (len == (size_t)H5FA_DBLOCK_SIZE(dblock))) 
+    HDassert(((!dblock->npages) && (len == (size_t)H5FA_DBLOCK_SIZE(dblock)))
              || (len == (size_t)H5FA_DBLOCK_PREFIX_SIZE(dblock)));
 
     /* Set the fixed array data block's information */
@@ -954,21 +954,21 @@ END_FUNC(STATIC)   /* end H5FA__cache_dblock_free_icr() */
  *		to free when a dblock entry is destroyed with the free
  *		file space block set.
  *
- *		This function is needed when the data block is paged, as 
+ *		This function is needed when the data block is paged, as
  *		the datablock header and all its pages are allocted as a
- *		single contiguous chunk of file space, and must be 
+ *		single contiguous chunk of file space, and must be
  *		deallocated the same way.
  *
  *		The size of the chunk of memory in which the dblock
  *		header and all its pages is stored in the size field,
  *		so we simply pass that value back to the cache.
  *
- *		If the datablock is not paged, then the size field of 
+ *		If the datablock is not paged, then the size field of
  *		the cache_info contains the correct size.  However this
  *		value will be the same as the size field, so we return
  *		the contents of the size field to the cache in this case
  *		as well.
- *		
+ *
  * Return:	Non-negative on success/Negative on failure
  *
  * Programmer:	John Mainzer
@@ -1158,7 +1158,7 @@ H5FA__cache_dblk_page_image_len(const void *_thing, size_t *image_len))
     HDassert(image_len);
 
     /* Set the image length size */
-    *image_len = dblk_page->size; 
+    *image_len = dblk_page->size;
 
 END_FUNC(STATIC)   /* end H5FA__cache_dblk_page_image_len() */
 
diff --git a/src/H5FApkg.h b/src/H5FApkg.h
index 8f76fc9..2baee88 100644
--- a/src/H5FApkg.h
+++ b/src/H5FApkg.h
@@ -157,10 +157,10 @@ typedef struct H5FA_hdr_t {
                                          * of the fixed array header.
  					 *
  					 * The field is used to avoid duplicate
-					 * setups of the flush dependency 
-					 * relationship, and to allow the 
+					 * setups of the flush dependency
+					 * relationship, and to allow the
 					 * fixed array header to destroy
-					 * the flush dependency on receipt of 
+					 * the flush dependency on receipt of
 					 * an eviction notification from the
 					 * metadata cache.
 					 */
diff --git a/src/H5FDcore.c b/src/H5FDcore.c
index 552b7ca..0551dd0 100644
--- a/src/H5FDcore.c
+++ b/src/H5FDcore.c
@@ -82,7 +82,7 @@ typedef struct H5FD_core_t {
     DWORD           nFileIndexLow;
     DWORD           nFileIndexHigh;
     DWORD           dwVolumeSerialNumber;
-    
+
     HANDLE          hFile;      /* Native windows file handle */
 #endif /* H5_HAVE_WIN32_API */
     hbool_t dirty;                              /* changes not saved?       */
@@ -405,7 +405,7 @@ done:
  *
  * Purpose:     Initializes any interface-specific data or routines.
  *
- * Return:      Non-negative on success/Negative on failure 
+ * Return:      Non-negative on success/Negative on failure
  *
  *-------------------------------------------------------------------------
  */
@@ -757,9 +757,9 @@ H5FD__core_open(const char *name, unsigned flags, hid_t fapl_id, haddr_t maxaddr
     if((file_image_info.buffer != NULL) && !(H5F_ACC_CREAT & flags)) {
         if(HDopen(name, o_flags, H5_POSIX_CREATE_MODE_RW) >= 0)
             HGOTO_ERROR(H5E_FILE, H5E_FILEEXISTS, NULL, "file already exists")
-        
+
         /* If backing store is requested, create and stat the file
-         * Note: We are forcing the O_CREAT flag here, even though this is 
+         * Note: We are forcing the O_CREAT flag here, even though this is
          * technically an open.
          */
         if(fa->backing_store) {
@@ -856,14 +856,14 @@ H5FD__core_open(const char *name, unsigned flags, hid_t fapl_id, haddr_t maxaddr
                 /* Read in existing data, being careful of interrupted system calls,
                  * partial results, and the end of the file.
                  */
-                
+
                 uint8_t *mem = file->mem;       /* memory pointer for writes */
                 HDoff_t offset = (HDoff_t)0;    /* offset for reading */
-                
+
                 while(size > 0) {
                     h5_posix_io_t       bytes_in        = 0;    /* # of bytes to read       */
                     h5_posix_io_ret_t   bytes_read      = -1;   /* # of bytes actually read */
-                    
+
                     /* Trying to read more bytes than the return type can handle is
                      * undefined behavior in POSIX.
                      */
@@ -871,7 +871,7 @@ H5FD__core_open(const char *name, unsigned flags, hid_t fapl_id, haddr_t maxaddr
                         bytes_in = H5_POSIX_MAX_IO_BYTES;
                     else
                         bytes_in = (h5_posix_io_t)size;
-                    
+
                     do {
 #ifdef H5_HAVE_PREADWRITE
                         bytes_read = HDpread(file->fd, mem, bytes_in, offset);
@@ -881,7 +881,7 @@ H5FD__core_open(const char *name, unsigned flags, hid_t fapl_id, haddr_t maxaddr
                         bytes_read = HDread(file->fd, mem, bytes_in);
 #endif /* H5_HAVE_PREADWRITE */
                     } while(-1 == bytes_read && EINTR == errno);
-                    
+
                     if(-1 == bytes_read) { /* error */
                         int myerrno = errno;
                         time_t mytime = HDtime(NULL);
@@ -890,10 +890,10 @@ H5FD__core_open(const char *name, unsigned flags, hid_t fapl_id, haddr_t maxaddr
 
                         HGOTO_ERROR(H5E_IO, H5E_READERROR, NULL, "file read failed: time = %s, filename = '%s', file descriptor = %d, errno = %d, error message = '%s', file->mem = %p, total read size = %llu, bytes this sub-read = %llu, bytes actually read = %llu, offset = %llu", HDctime(&mytime), file->name, file->fd, myerrno, HDstrerror(myerrno), file->mem, (unsigned long long)size, (unsigned long long)bytes_in, (unsigned long long)bytes_read, (unsigned long long)offset);
                     } /* end if */
-                    
+
                     HDassert(bytes_read >= 0);
                     HDassert((size_t)bytes_read <= size);
-                    
+
                     mem += bytes_read;
                     size -= (size_t)bytes_read;
                 } /* end while */
@@ -1467,24 +1467,24 @@ done:
  *              than the end-of-address.
  *
  *              Addendum -- 12/2/11
- *              For file images opened with the core file driver, it is 
+ *              For file images opened with the core file driver, it is
  *              necessary that we avoid reallocating the core file driver's
  *              buffer uneccessarily.
  *
  *              To this end, I have made the following functional changes
- *              to this function.  
+ *              to this function.
  *
- *              If we are closing, and there is no backing store, this 
+ *              If we are closing, and there is no backing store, this
  *              function becomes a no-op.
  *
  *              If we are closing, and there is backing store, we set the
- *              eof to equal the eoa, and truncate the backing store to 
+ *              eof to equal the eoa, and truncate the backing store to
  *              the new eof
  *
- *              If we are not closing, we realloc the buffer to size equal 
- *              to the smallest multiple of the allocation increment that 
- *              equals or exceeds the eoa and set the eof accordingly.  
- *              Note that we no longer truncate	the backing store to the 
+ *              If we are not closing, we realloc the buffer to size equal
+ *              to the smallest multiple of the allocation increment that
+ *              equals or exceeds the eoa and set the eof accordingly.
+ *              Note that we no longer truncate	the backing store to the
  *              new eof if applicable.
  *                                                                  -- JRM
  *
diff --git a/src/H5FDdirect.c b/src/H5FDdirect.c
index ce5e081..d045987 100644
--- a/src/H5FDdirect.c
+++ b/src/H5FDdirect.c
@@ -1344,7 +1344,7 @@ H5FD_direct_lock(H5FD_t *_file, hbool_t rw)
 
     /* Determine the type of lock */
     int lock = rw ? LOCK_EX : LOCK_SH;
-    
+
     /* Place the lock with non-blocking */
     if(HDflock(file->fd, lock | LOCK_NB) < 0)
         HSYS_GOTO_ERROR(H5E_FILE, H5E_BADFILE, FAIL, "unable to flock file")
diff --git a/src/H5FDhdfs.h b/src/H5FDhdfs.h
index 3d4128d..37252f0 100644
--- a/src/H5FDhdfs.h
+++ b/src/H5FDhdfs.h
@@ -43,7 +43,7 @@ extern "C" {
  *
  * `version` (int32_t)
  *
- *     Version number of the `H5FD_hdfs_fapl_t` structure.  Any instance passed 
+ *     Version number of the `H5FD_hdfs_fapl_t` structure.  Any instance passed
  *     to the above calls must have a recognized version number, or an error
  *     will be flagged.
  *
diff --git a/src/H5FDint.c b/src/H5FDint.c
index ea8c4d8..8a2148a 100644
--- a/src/H5FDint.c
+++ b/src/H5FDint.c
@@ -241,7 +241,7 @@ H5FD_write(H5FD_t *file, H5FD_mem_t type, haddr_t addr, size_t size, const void
     if(HADDR_UNDEF == (eoa = (file->cls->get_eoa)(file, type)))
         HGOTO_ERROR(H5E_VFL, H5E_CANTINIT, FAIL, "driver get_eoa request failed")
     if((addr + file->base_addr + size) > eoa)
-        HGOTO_ERROR(H5E_ARGS, H5E_OVERFLOW, FAIL, "addr overflow, addr = %llu, size=%llu, eoa=%llu", 
+        HGOTO_ERROR(H5E_ARGS, H5E_OVERFLOW, FAIL, "addr overflow, addr = %llu, size=%llu, eoa=%llu",
                     (unsigned long long)(addr+ file->base_addr), (unsigned long long)size, (unsigned long long)eoa)
 
     /* Dispatch to driver */
@@ -389,7 +389,7 @@ H5FD_driver_query(const H5FD_class_t *driver, unsigned long *flags/*out*/)
     /* Check for the driver to query and then query it */
     if(driver->query)
         ret_value = (driver->query)(NULL, flags);
-    else 
+    else
         *flags = 0;
 
     FUNC_LEAVE_NOAPI(ret_value)
diff --git a/src/H5FDlog.c b/src/H5FDlog.c
index 60255e5..f649bc4 100644
--- a/src/H5FDlog.c
+++ b/src/H5FDlog.c
@@ -108,7 +108,7 @@ typedef struct H5FD_log_t {
     DWORD           nFileIndexLow;
     DWORD           nFileIndexHigh;
     DWORD           dwVolumeSerialNumber;
-    
+
     HANDLE          hFile;      /* Native windows file handle */
 #endif  /* H5_HAVE_WIN32_API */
 
@@ -1255,7 +1255,7 @@ H5FD_log_read(H5FD_t *_file, H5FD_mem_t type, hid_t H5_ATTR_UNUSED dxpl_id, hadd
     while(size > 0) {
 
         h5_posix_io_t       bytes_in        = 0;    /* # of bytes to read       */
-        h5_posix_io_ret_t   bytes_read      = -1;   /* # of bytes actually read */ 
+        h5_posix_io_ret_t   bytes_read      = -1;   /* # of bytes actually read */
 
         /* Trying to read more bytes than the return type can handle is
          * undefined behavior in POSIX.
@@ -1295,7 +1295,7 @@ H5FD_log_read(H5FD_t *_file, H5FD_mem_t type, hid_t H5_ATTR_UNUSED dxpl_id, hadd
 
         HDassert(bytes_read >= 0);
         HDassert((size_t)bytes_read <= size);
-        
+
         size -= (size_t)bytes_read;
         addr += (haddr_t)bytes_read;
         buf = (char *)buf + bytes_read;
@@ -1472,7 +1472,7 @@ H5FD_log_write(H5FD_t *_file, H5FD_mem_t type, hid_t H5_ATTR_UNUSED dxpl_id, had
     while(size > 0) {
 
         h5_posix_io_t       bytes_in        = 0;    /* # of bytes to write  */
-        h5_posix_io_ret_t   bytes_wrote     = -1;   /* # of bytes written   */ 
+        h5_posix_io_ret_t   bytes_wrote     = -1;   /* # of bytes written   */
 
         /* Trying to write more bytes than the return type can handle is
          * undefined behavior in POSIX.
diff --git a/src/H5FDmirror.c b/src/H5FDmirror.c
index bcbac08..ef035c1 100644
--- a/src/H5FDmirror.c
+++ b/src/H5FDmirror.c
@@ -1091,7 +1091,7 @@ H5FD_mirror_xmit_is_xmit(const H5FD_mirror_xmit_t *xmit)
 {
     LOG_OP_CALL("H5FD_mirror_xmit_is_xmit");
     HDassert(xmit);
-    if ( (H5FD_MIRROR_XMIT_MAGIC != xmit->magic) || 
+    if ( (H5FD_MIRROR_XMIT_MAGIC != xmit->magic) ||
          (H5FD_MIRROR_XMIT_CURR_VERSION != xmit->version) )
     {
         return FALSE;
diff --git a/src/H5FDmpio.c b/src/H5FDmpio.c
index 11f0411..8c7e91a 100644
--- a/src/H5FDmpio.c
+++ b/src/H5FDmpio.c
@@ -1283,7 +1283,7 @@ H5FD__mpio_read(H5FD_t *_file, H5FD_mem_t H5_ATTR_UNUSED type,
 #endif
             HMPI_GOTO_ERROR(FAIL, "MPI_Get_elements failed", mpi_code)
     } /* end if */
- 
+
     /* If the rank0-bcast feature was used, broadcast the # of bytes read to
      * other ranks, which didn't perform any I/O.
      */
@@ -1582,14 +1582,14 @@ done:
  *
  * Purpose:     Make certain the file's size matches it's allocated size
  *
- *              This is a little sticky in the mpio case, as it is not 
+ *              This is a little sticky in the mpio case, as it is not
  *              easy for us to track the current EOF by extracting it from
- *              write calls. 
+ *              write calls.
  *
  *              Instead, we first check to see if the eoa has changed since
- *              the last call to this function.  If it has, we call 
- *              MPI_File_get_size() to determine the current EOF, and 
- *              only call MPI_File_set_size() if this value disagrees 
+ *              the last call to this function.  If it has, we call
+ *              MPI_File_get_size() to determine the current EOF, and
+ *              only call MPI_File_set_size() if this value disagrees
  *              with the current eoa.
  *
  * Return:      SUCCEED/FAIL
@@ -1621,13 +1621,13 @@ H5FD__mpio_truncate(H5FD_t *_file, hid_t H5_ATTR_UNUSED dxpl_id, hbool_t H5_ATTR
         MPI_Offset      size;
         MPI_Offset      needed_eof;
 
-        /* In principle, it is possible for the size returned by the 
-         * call to MPI_File_get_size() to depend on whether writes from 
+        /* In principle, it is possible for the size returned by the
+         * call to MPI_File_get_size() to depend on whether writes from
          * all proceeses have completed at the time process 0 makes the
-         * call.  
+         * call.
          *
          * In practice, most (all?) truncate calls will come after a barrier
-         * and with no interviening writes to the file (with the possible 
+         * and with no interviening writes to the file (with the possible
          * exception of sueprblock / superblock extension message updates).
          *
          * Check the "MPI file closing" flag in the API context to determine
@@ -1658,13 +1658,13 @@ H5FD__mpio_truncate(H5FD_t *_file, hid_t H5_ATTR_UNUSED dxpl_id, hbool_t H5_ATTR
             if(MPI_SUCCESS != (mpi_code = MPI_File_set_size(file->f, needed_eof)))
                 HMPI_GOTO_ERROR(FAIL, "MPI_File_set_size failed", mpi_code)
 
-            /* In general, we must wait until all processes have finished 
-             * the truncate before any process can continue, since it is 
-             * possible that a process would write at the end of the 
+            /* In general, we must wait until all processes have finished
+             * the truncate before any process can continue, since it is
+             * possible that a process would write at the end of the
              * file, and this write would be discarded by the truncate.
              *
-             * While this is an issue for a user initiated flush, it may 
-             * not be an issue at file close.  If so, we may be able to 
+             * While this is an issue for a user initiated flush, it may
+             * not be an issue at file close.  If so, we may be able to
              * optimize out the following barrier in that case.
              */
             if(MPI_SUCCESS != (mpi_code = MPI_Barrier(file->comm)))
diff --git a/src/H5FDmulti.c b/src/H5FDmulti.c
index d7fc88d..72f4da5 100644
--- a/src/H5FDmulti.c
+++ b/src/H5FDmulti.c
@@ -87,7 +87,7 @@ typedef struct H5FD_multi_t {
     haddr_t             memb_next[H5FD_MEM_NTYPES]; /*addr of next member                       */
     H5FD_t             *memb[H5FD_MEM_NTYPES];      /*member pointers                           */
     haddr_t             memb_eoa[H5FD_MEM_NTYPES];  /*EOA for individual files,
-                                                     *end of allocated addresses.  v1.6 library 
+                                                     *end of allocated addresses.  v1.6 library
                                                      *have the EOA for the entire file. But it's
                                                      *meaningless for MULTI file.  We replaced it
                                                      *with the EOAs for individual files        */
@@ -831,9 +831,9 @@ H5FD_multi_sb_decode(H5FD_t *_file, const char *name, const unsigned char *buf)
         if (file->memb[mt])
             if(H5FDset_eoa(file->memb[mt], mt, memb_eoa[mt])<0)
                 H5Epush_ret(func, H5E_ERR_CLS, H5E_INTERNAL, H5E_CANTSET, "set_eoa() failed", -1)
-       
-        /* Save the individual EOAs in one place for later comparison (in H5FD_multi_set_eoa) */ 
-        file->memb_eoa[mt] = memb_eoa[mt]; 
+
+        /* Save the individual EOAs in one place for later comparison (in H5FD_multi_set_eoa) */
+        file->memb_eoa[mt] = memb_eoa[mt];
     } END_MEMBERS;
 
     return 0;
@@ -1001,7 +1001,7 @@ H5FD_multi_open(const char *name, unsigned flags, hid_t fapl_id, haddr_t maxaddr
     /*
      * Initialize the file from the file access properties, using default
      * values if necessary.  Make sure to use CALLOC here because the code
-     * in H5FD_multi_set_eoa depends on the proper initialization of memb_eoa 
+     * in H5FD_multi_set_eoa depends on the proper initialization of memb_eoa
      * in H5FD_multi_t.
      */
     if(NULL == (file = (H5FD_multi_t *)calloc((size_t)1, sizeof(H5FD_multi_t))))
diff --git a/src/H5FDpublic.h b/src/H5FDpublic.h
index 124bac6..61bf212 100644
--- a/src/H5FDpublic.h
+++ b/src/H5FDpublic.h
@@ -207,7 +207,7 @@ typedef enum H5F_mem_t	H5FD_mem_t;
      * the handle for the VFD (returned with the 'get_handle' callback) is
      * of type 'int' and is compatible with POSIX I/O calls.
      */
-#define H5FD_FEAT_POSIX_COMPAT_HANDLE   0x00000080    
+#define H5FD_FEAT_POSIX_COMPAT_HANDLE   0x00000080
     /*
      * Defining H5FD_FEAT_HAS_MPI for a VFL driver means that
      * the driver makes use of MPI communication and code may retrieve
@@ -220,7 +220,7 @@ typedef enum H5F_mem_t	H5FD_mem_t;
      * instead of the default H5D_ALLOC_TIME_LATE
      */
 #define H5FD_FEAT_ALLOCATE_EARLY        0x00000200
-    /* 
+    /*
      * Defining H5FD_FEAT_ALLOW_FILE_IMAGE for a VFL driver means that
      * the driver is able to use a file image in the fapl as the initial
      * contents of a file.
@@ -334,7 +334,7 @@ struct H5FD_t {
 /* Define enum for the source of file image callbacks */
 typedef enum {
     H5FD_FILE_IMAGE_OP_NO_OP,
-    H5FD_FILE_IMAGE_OP_PROPERTY_LIST_SET,     
+    H5FD_FILE_IMAGE_OP_PROPERTY_LIST_SET,
     H5FD_FILE_IMAGE_OP_PROPERTY_LIST_COPY,
     H5FD_FILE_IMAGE_OP_PROPERTY_LIST_GET,
     H5FD_FILE_IMAGE_OP_PROPERTY_LIST_CLOSE,
@@ -345,13 +345,13 @@ typedef enum {
 
 /* Define structure to hold file image callbacks */
 typedef struct {
-    void   *(*image_malloc)(size_t size, H5FD_file_image_op_t file_image_op, 
+    void   *(*image_malloc)(size_t size, H5FD_file_image_op_t file_image_op,
                             void *udata);
     void   *(*image_memcpy)(void *dest, const void *src, size_t size,
                             H5FD_file_image_op_t file_image_op, void *udata);
-    void   *(*image_realloc)(void *ptr, size_t size, 
+    void   *(*image_realloc)(void *ptr, size_t size,
                             H5FD_file_image_op_t file_image_op, void *udata);
-    herr_t  (*image_free)(void *ptr, H5FD_file_image_op_t file_image_op, 
+    herr_t  (*image_free)(void *ptr, H5FD_file_image_op_t file_image_op,
                           void *udata);
     void   *(*udata_copy)(void *udata);
     herr_t  (*udata_free)(void *udata);
diff --git a/src/H5FDsec2.c b/src/H5FDsec2.c
index d718a93..3551905 100644
--- a/src/H5FDsec2.c
+++ b/src/H5FDsec2.c
@@ -85,7 +85,7 @@ typedef struct H5FD_sec2_t {
     DWORD           nFileIndexLow;
     DWORD           nFileIndexHigh;
     DWORD           dwVolumeSerialNumber;
-    
+
     HANDLE          hFile;      /* Native windows file handle */
 #endif  /* H5_HAVE_WIN32_API */
 
@@ -605,7 +605,7 @@ H5FD_sec2_set_eoa(H5FD_t *_file, H5FD_mem_t H5_ATTR_UNUSED type, haddr_t addr)
  *              either the filesystem end-of-file or the HDF5 end-of-address
  *              markers.
  *
- * Return:      End of file address, the first address past the end of the 
+ * Return:      End of file address, the first address past the end of the
  *              "file", either the filesystem file or the HDF5 file.
  *
  * Programmer:  Robb Matzke
@@ -722,7 +722,7 @@ H5FD_sec2_read(H5FD_t *_file, H5FD_mem_t H5_ATTR_UNUSED type, hid_t H5_ATTR_UNUS
             bytes_read = HDread(file->fd, buf, bytes_in);
 #endif /* H5_HAVE_PREADWRITE */
         } while(-1 == bytes_read && EINTR == errno);
-        
+
         if(-1 == bytes_read) { /* error */
             int myerrno = errno;
             time_t mytime = HDtime(NULL);
@@ -731,16 +731,16 @@ H5FD_sec2_read(H5FD_t *_file, H5FD_mem_t H5_ATTR_UNUSED type, hid_t H5_ATTR_UNUS
 
             HGOTO_ERROR(H5E_IO, H5E_READERROR, FAIL, "file read failed: time = %s, filename = '%s', file descriptor = %d, errno = %d, error message = '%s', buf = %p, total read size = %llu, bytes this sub-read = %llu, bytes actually read = %llu, offset = %llu", HDctime(&mytime), file->filename, file->fd, myerrno, HDstrerror(myerrno), buf, (unsigned long long)size, (unsigned long long)bytes_in, (unsigned long long)bytes_read, (unsigned long long)offset);
         } /* end if */
-        
+
         if(0 == bytes_read) {
             /* end of file but not end of format address space */
             HDmemset(buf, 0, size);
             break;
         } /* end if */
-        
+
         HDassert(bytes_read >= 0);
         HDassert((size_t)bytes_read <= size);
-        
+
         size -= (size_t)bytes_read;
         addr += (haddr_t)bytes_read;
         buf = (char *)buf + bytes_read;
@@ -808,7 +808,7 @@ H5FD_sec2_write(H5FD_t *_file, H5FD_mem_t H5_ATTR_UNUSED type, hid_t H5_ATTR_UNU
     while(size > 0) {
 
         h5_posix_io_t       bytes_in        = 0;    /* # of bytes to write  */
-        h5_posix_io_ret_t   bytes_wrote     = -1;   /* # of bytes written   */ 
+        h5_posix_io_ret_t   bytes_wrote     = -1;   /* # of bytes written   */
 
         /* Trying to write more bytes than the return type can handle is
          * undefined behavior in POSIX.
@@ -827,7 +827,7 @@ H5FD_sec2_write(H5FD_t *_file, H5FD_mem_t H5_ATTR_UNUSED type, hid_t H5_ATTR_UNU
             bytes_wrote = HDwrite(file->fd, buf, bytes_in);
 #endif /* H5_HAVE_PREADWRITE */
         } while(-1 == bytes_wrote && EINTR == errno);
-        
+
         if(-1 == bytes_wrote) { /* error */
             int myerrno = errno;
             time_t mytime = HDtime(NULL);
@@ -836,7 +836,7 @@ H5FD_sec2_write(H5FD_t *_file, H5FD_mem_t H5_ATTR_UNUSED type, hid_t H5_ATTR_UNU
 
             HGOTO_ERROR(H5E_IO, H5E_WRITEERROR, FAIL, "file write failed: time = %s, filename = '%s', file descriptor = %d, errno = %d, error message = '%s', buf = %p, total write size = %llu, bytes this sub-write = %llu, bytes actually written = %llu, offset = %llu", HDctime(&mytime), file->filename, file->fd, myerrno, HDstrerror(myerrno), buf, (unsigned long long)size, (unsigned long long)bytes_in, (unsigned long long)bytes_wrote, (unsigned long long)offset);
         } /* end if */
-        
+
         HDassert(bytes_wrote > 0);
         HDassert((size_t)bytes_wrote <= size);
 
diff --git a/src/H5FDstdio.c b/src/H5FDstdio.c
index 861c6a6..d29a1b4 100644
--- a/src/H5FDstdio.c
+++ b/src/H5FDstdio.c
@@ -110,7 +110,7 @@ typedef struct H5FD_stdio_t {
     DWORD           nFileIndexLow;
     DWORD           nFileIndexHigh;
     DWORD           dwVolumeSerialNumber;
-    
+
     HANDLE          hFile;      /* Native windows file handle */
 #endif  /* H5_HAVE_WIN32_API */
 } H5FD_stdio_t;
@@ -824,13 +824,13 @@ H5FD_stdio_read(H5FD_t *_file, H5FD_mem_t /*UNUSED*/ type, hid_t /*UNUSED*/ dxpl
             file->pos = HADDR_UNDEF;
             H5Epush_ret(func, H5E_ERR_CLS, H5E_IO, H5E_READERROR, "fread failed", -1)
         } /* end if */
-        
+
         if(0 == bytes_read && feof(file->fp)) {
             /* end of file but not end of format address space */
             memset((unsigned char *)buf, 0, size);
             break;
         } /* end if */
-        
+
         size -= bytes_read;
         addr += (haddr_t)bytes_read;
         buf = (char *)buf + bytes_read;
@@ -914,7 +914,7 @@ H5FD_stdio_write(H5FD_t *_file, H5FD_mem_t /*UNUSED*/ type, hid_t /*UNUSED*/ dxp
             file->pos = HADDR_UNDEF;
             H5Epush_ret(func, H5E_ERR_CLS, H5E_IO, H5E_WRITEERROR, "fwrite failed", -1)
         } /* end if */
-        
+
         assert(bytes_wrote > 0);
         assert((size_t)bytes_wrote <= size);
 
@@ -1040,7 +1040,7 @@ H5FD_stdio_truncate(H5FD_t *_file, hid_t /*UNUSED*/ dxpl_id,
                 if(dwError != NO_ERROR )
                     H5Epush_ret(func, H5E_ERR_CLS, H5E_FILE, H5E_FILEOPEN, "unable to set file pointer", -1)
             }
-            
+
             bError = SetEndOfFile(file->hFile);
             if(0 == bError)
                 H5Epush_ret(func, H5E_ERR_CLS, H5E_IO, H5E_SEEKERROR, "unable to truncate/extend file properly", -1)
diff --git a/src/H5FDtest.c b/src/H5FDtest.c
index dec0818..2eb176d 100644
--- a/src/H5FDtest.c
+++ b/src/H5FDtest.c
@@ -110,6 +110,6 @@ H5FD__supports_swmr_test(const char *vfd_name)
         ret_value = !HDstrcmp(vfd_name, "log") || !HDstrcmp(vfd_name, "sec2");
 
     FUNC_LEAVE_NOAPI(ret_value)
-    
+
 } /* end H5FD__supports_swmr_test() */
 
diff --git a/src/H5FS.c b/src/H5FS.c
index 1bd56b8..4fe0927 100644
--- a/src/H5FS.c
+++ b/src/H5FS.c
@@ -1171,7 +1171,7 @@ done:
     FUNC_LEAVE_NOAPI(ret_value)
 } /* end H5FS__sinfo_dest() */
 
-herr_t 
+herr_t
 H5FS_get_sect_count(const H5FS_t *frsp, hsize_t *tot_sect_count)
 {
     herr_t ret_value = SUCCEED; /* Return value */
diff --git a/src/H5FScache.c b/src/H5FScache.c
index d5f2817..c3e3998 100644
--- a/src/H5FScache.c
+++ b/src/H5FScache.c
@@ -85,7 +85,7 @@ static void *H5FS__cache_hdr_deserialize(const void *image, size_t len,
 static herr_t H5FS__cache_hdr_image_len(const void *thing, size_t *image_len);
 static herr_t H5FS__cache_hdr_pre_serialize(H5F_t *f, void *thing, haddr_t addr,
     size_t len, haddr_t *new_addr, size_t *new_len, unsigned *flags);
-static herr_t H5FS__cache_hdr_serialize(const H5F_t *f, void *image, 
+static herr_t H5FS__cache_hdr_serialize(const H5F_t *f, void *image,
     size_t len, void *thing);
 static herr_t H5FS__cache_hdr_notify(H5AC_notify_action_t action, void *thing);
 static herr_t H5FS__cache_hdr_free_icr(void *thing);
@@ -241,7 +241,7 @@ H5FS__cache_hdr_verify_chksum(const void *_image, size_t len, void H5_ATTR_UNUSE
  *-------------------------------------------------------------------------
  */
 static void *
-H5FS__cache_hdr_deserialize(const void *_image, size_t H5_ATTR_NDEBUG_UNUSED len, void *_udata, 
+H5FS__cache_hdr_deserialize(const void *_image, size_t H5_ATTR_NDEBUG_UNUSED len, void *_udata,
     hbool_t H5_ATTR_UNUSED *dirty)
 {
     H5FS_t		*fspace = NULL; /* Free space header info */
@@ -303,8 +303,8 @@ H5FS__cache_hdr_deserialize(const void *_image, size_t H5_ATTR_NDEBUG_UNUSED len
     /* Expand percent */
     UINT16DECODE(image, fspace->expand_percent);
 
-    /* Size of address space free space sections are within 
-     * (log2 of actual value) 
+    /* Size of address space free space sections are within
+     * (log2 of actual value)
      */
     UINT16DECODE(image, fspace->max_sect_addr);
 
@@ -378,20 +378,20 @@ H5FS__cache_hdr_image_len(const void *_thing, size_t *image_len)
 /*-------------------------------------------------------------------------
  * Function:	H5FS__cache_hdr_pre_serialize
  *
- * Purpose:	The free space manager header contains the address, size, and 
+ * Purpose:	The free space manager header contains the address, size, and
  *		allocation size of the free space manager section info.  However,
  *		since it is possible for the section info to either not be allocated
  *		at all, or be allocated in temporary (AKA imaginary) files space,
  *		it is possible for the above mentioned fields to contain giberish
  *		when the free space manager header is serialized.
  *
- *		This function exists to prevent this problem.  It does so by 
+ *		This function exists to prevent this problem.  It does so by
  *		forcing allocation of real file space for the section information.
  *
  *		Note that in the Version 2 cache, this problem was dealt with by
  *		simply flushing the section info before flushing the header.  This
- *		was possible, since the clients handled file I/O directly.  As 
- *		this responsibility has moved to the cache in Version 3, this 
+ *		was possible, since the clients handled file I/O directly.  As
+ *		this responsibility has moved to the cache in Version 3, this
  *		solution is no longer directly applicable.
  *
  * Return:	Success:	SUCCEED
@@ -402,9 +402,9 @@ H5FS__cache_hdr_image_len(const void *_thing, size_t *image_len)
  *
  *-------------------------------------------------------------------------
  */
-static herr_t 
+static herr_t
 H5FS__cache_hdr_pre_serialize(H5F_t *f, void *_thing,
-    haddr_t addr, size_t H5_ATTR_UNUSED len, haddr_t H5_ATTR_NDEBUG_UNUSED *new_addr, 
+    haddr_t addr, size_t H5_ATTR_UNUSED len, haddr_t H5_ATTR_NDEBUG_UNUSED *new_addr,
     size_t H5_ATTR_NDEBUG_UNUSED *new_len, unsigned *flags)
 {
     H5FS_t 	*fspace = (H5FS_t *)_thing;     /* Pointer to the object */
@@ -433,23 +433,23 @@ H5FS__cache_hdr_pre_serialize(H5F_t *f, void *_thing,
         /* Set the ring type for the section info in the API context */
         H5AC_set_ring(ring, &orig_ring);
 
-        /* This implies that the header "owns" the section info.  
+        /* This implies that the header "owns" the section info.
          *
-         * Unfortunately, the comments in the code are not clear as to 
+         * Unfortunately, the comments in the code are not clear as to
          * what this means, but from reviewing the code (most particularly
-         * H5FS_close(), H5FS_sinfo_lock, and H5FS_sinfo_unlock()), I 
-         * gather that it means that the header is maintaining a pointer to 
-         * an instance of H5FS_sinfo_t in which free space data is 
+         * H5FS_close(), H5FS_sinfo_lock, and H5FS_sinfo_unlock()), I
+         * gather that it means that the header is maintaining a pointer to
+         * an instance of H5FS_sinfo_t in which free space data is
          * maintained, and either:
          *
          * 1) The instance of H5FS_sinfo_t is not in the metadata cache.
          *
-         *    This will be TRUE iff H5F_addr_defined(fspace->sect_addr) 
+         *    This will be TRUE iff H5F_addr_defined(fspace->sect_addr)
          *    is FALSE, and fspace->sinfo is not NULL.  This is sometimes
          *    referred to as "floating" section info in the comments.
          *
-         *    If the section info structure contains free space data 
-         *    that must be placed on disk eventually, then 
+         *    If the section info structure contains free space data
+         *    that must be placed on disk eventually, then
          *
          *        fspace->serial_sect_count > 0
          *
@@ -458,57 +458,57 @@ H5FS__cache_hdr_pre_serialize(H5F_t *f, void *_thing,
          *        H5F_addr_defined(fspace->addr)
          *
          *    will both be TRUE.  If this contition does not hold, then
-         *    either the free space info is not persistent 
-         *    (!H5F_addr_defined(fspace->addr)???) or the section info 
-         *    contains no free space data that must be written to file 
+         *    either the free space info is not persistent
+         *    (!H5F_addr_defined(fspace->addr)???) or the section info
+         *    contains no free space data that must be written to file
          *    ( fspace->serial_sect_count == 0 ).
          *
          * 2) The instance of H5FS_sinfo_t is in the metadata cache with
          *    address in temporary file space (AKA imaginary file space).
-         *    The entry may or may not be protected, and if protected, it 
-         *    may be protected either RW or RO (as indicated by 
+         *    The entry may or may not be protected, and if protected, it
+         *    may be protected either RW or RO (as indicated by
          *    fspace->sinfo_protected and  fspace->sinfo_accmod).
          *
          * 3) The instance of H5FS_sinfo_t is in the metadata cache with
          *    address in real file space.  As in case 2) above, the entry
-         *    may or may not be protected, and if protected, it 
-         *    may be protected either RW or RO (as indicated by 
+         *    may or may not be protected, and if protected, it
+         *    may be protected either RW or RO (as indicated by
          *    fspace->sinfo_protected and  fspace->sinfo_accmod).
          *
-         * Observe that fspace->serial_sect_count > 0 must be TRUE in 
-         * cases 2) and 3), as the section info should not be stored on 
+         * Observe that fspace->serial_sect_count > 0 must be TRUE in
+         * cases 2) and 3), as the section info should not be stored on
          * disk if it doesn't exist.  Similarly, since the section info
-         * will not be stored to disk unless the header is, 
+         * will not be stored to disk unless the header is,
          * H5F_addr_defined(fspace->addr) must hold as well.
          *
          * As the objective is to touch up the free space manager header
-         * so that it contains sensical data on the size and location of 
+         * so that it contains sensical data on the size and location of
          * the section information, we have to handle each of the above
          * cases differently.
          *
-         * Case 1) If either fspace->serial_sect_count == 0 or 
-         *         ! H5F_addr_defined(fspace->addr) do nothing as either 
-         *         the free space manager data is not persistent, or the 
+         * Case 1) If either fspace->serial_sect_count == 0 or
+         *         ! H5F_addr_defined(fspace->addr) do nothing as either
+         *         the free space manager data is not persistent, or the
          *         section info is empty.
          *
          *         Otherwise, allocate space for the section info in real
-         *         file space, insert the section info at this location, and 
-         *         set fspace->sect_addr, fspace->sect_size, and 
+         *         file space, insert the section info at this location, and
+         *         set fspace->sect_addr, fspace->sect_size, and
          *         fspace->alloc_sect_size to reflect the new location
          *         of the section info.  Note that it is not necessary to
          *         force a write of the section info.
          *
          * Case 2) Allocate space for the section info in real file space,
-         *         and tell the metadata cache to relocate the entry.  
-         *         Update fspace->sect_addr, fspace->sect_size, and 
+         *         and tell the metadata cache to relocate the entry.
+         *         Update fspace->sect_addr, fspace->sect_size, and
          *         fspace->alloc_sect_size to reflect the new location.
          *
          * Case 3) Nothing to be done in this case, although it is useful
          *         to perform sanity checks.
          *
-         * Note that while we may alter the contents of the free space 
-         * header in cases 1) and 2), there is no need to mark the header 
-         * as dirty, as the metadata cache would not be attempting to 
+         * Note that while we may alter the contents of the free space
+         * header in cases 1) and 2), there is no need to mark the header
+         * as dirty, as the metadata cache would not be attempting to
          * serialize the header if it thought it was clean.
          */
         if(fspace->serial_sect_count > 0 && H5F_addr_defined(fspace->addr)) {
@@ -558,7 +558,7 @@ H5FS__cache_hdr_pre_serialize(H5F_t *f, void *_thing,
 
                 HDassert(fspace->sinfo->cache_info.size == fspace->alloc_sect_size);
 
-                /* the metadata cache is now managing the section info, 
+                /* the metadata cache is now managing the section info,
                  * so set fspace->sinfo to NULL.
                  */
                 fspace->sinfo = NULL;
@@ -607,11 +607,11 @@ H5FS__cache_hdr_pre_serialize(H5F_t *f, void *_thing,
         } /* end else */
     } /* end if */
     else if(H5F_addr_defined(fspace->sect_addr)) {
-        /* Here the metadata cache is managing the section info.  
+        /* Here the metadata cache is managing the section info.
          *
-         * Do some sanity checks, and then test to see if the section 
-         * info is in real file space.  If it isn't relocate it into 
-         * real file space lest the header be written to file with 
+         * Do some sanity checks, and then test to see if the section
+         * info is in real file space.  If it isn't relocate it into
+         * real file space lest the header be written to file with
          * a nonsense section info address.
          */
         if(!H5F_POINT_OF_NO_RETURN(f)) {
@@ -623,12 +623,12 @@ H5FS__cache_hdr_pre_serialize(H5F_t *f, void *_thing,
             unsigned sect_status = 0;
             haddr_t new_sect_addr;
 
-            /* we have work to do -- must relocate section info into 
+            /* we have work to do -- must relocate section info into
              * real file space.
              *
              * Since the section info address is in temporary space (AKA
-             * imaginary space), it follows that the entry must be in 
-             * cache.  Further, since fspace->sinfo is NULL, it must be 
+             * imaginary space), it follows that the entry must be in
+             * cache.  Further, since fspace->sinfo is NULL, it must be
              * unprotected and un-pinned.  Start by verifying this.
              */
             if(H5AC_get_entry_status(f, fspace->sect_addr, &sect_status) < 0)
@@ -654,7 +654,7 @@ H5FS__cache_hdr_pre_serialize(H5F_t *f, void *_thing,
             /* Update the internal address for the section info */
             fspace->sect_addr = new_sect_addr;
 
-            /* No need to mark the header dirty, as we are about to 
+            /* No need to mark the header dirty, as we are about to
              * serialize it.
              */
         } /* end if */
@@ -682,7 +682,7 @@ done:
  *
  * Purpose: 	Given an instance of H5FS_t and a suitably sized buffer,
  *      	serialize the contents of the instance of H5FS_t and write
- *      	its contents to the buffer.  This buffer will be used to 
+ *      	its contents to the buffer.  This buffer will be used to
  *      	write the image of the instance to file.
  *
  * Return:      Success:        SUCCEED
@@ -712,19 +712,19 @@ H5FS__cache_hdr_serialize(const H5F_t *f, void *_image, size_t H5_ATTR_NDEBUG_UN
     HDassert(fspace->cache_info.type == H5AC_FSPACE_HDR);
     HDassert(fspace->hdr_size == len);
 
-    /* The section information does not always exits, and if it does, 
-     * it is not always in the cache.  To make matters more interesting, 
+    /* The section information does not always exits, and if it does,
+     * it is not always in the cache.  To make matters more interesting,
      * even if it is in the cache, it may not be in real file space.
      *
-     * The pre-serialize function should have moved the section info 
+     * The pre-serialize function should have moved the section info
      * into real file space if necessary before this function was called.
      * The following asserts are a cursory check on this.
      */
     HDassert((! H5F_addr_defined(fspace->sect_addr)) || (! H5F_IS_TMP_ADDR(f, fspace->sect_addr)));
 
     if(!H5F_POINT_OF_NO_RETURN(f))
-        HDassert((! H5F_addr_defined(fspace->sect_addr)) || 
-                 ((fspace->sect_size > 0) && 
+        HDassert((! H5F_addr_defined(fspace->sect_addr)) ||
+                 ((fspace->sect_size > 0) &&
                  (fspace->alloc_sect_size == (size_t)fspace->sect_size)));
 
     /* Magic number */
@@ -758,8 +758,8 @@ H5FS__cache_hdr_serialize(const H5F_t *f, void *_image, size_t H5_ATTR_NDEBUG_UN
     /* Expand percent */
     UINT16ENCODE(image, fspace->expand_percent);
 
-    /* Size of address space free space sections are within (log2 of 
-     * actual value) 
+    /* Size of address space free space sections are within (log2 of
+     * actual value)
      */
     UINT16ENCODE(image, fspace->max_sect_addr);
 
@@ -808,7 +808,7 @@ H5FS__cache_hdr_notify(H5AC_notify_action_t action, void *_thing)
     herr_t ret_value = SUCCEED;         /* Return value */
 
     FUNC_ENTER_NOAPI_NOINIT
-    
+
     /* Sanity check */
     HDassert(fspace);
 
@@ -893,7 +893,7 @@ done:
 /*-------------------------------------------------------------------------
  * Function:	H5FS__cache_sinfo_get_initial_load_size()
  *
- * Purpose:	Compute the size of the on disk image of the free space 
+ * Purpose:	Compute the size of the on disk image of the free space
  *		manager section info, and place this value in *image_len.
  *
  * Return:	Success:	SUCCEED
@@ -904,7 +904,7 @@ done:
  *
  *-------------------------------------------------------------------------
  */
-static herr_t 
+static herr_t
 H5FS__cache_sinfo_get_initial_load_size(void  *_udata, size_t *image_len)
 {
     const H5FS_t *fspace;        			/* free space manager */
@@ -1108,7 +1108,7 @@ H5FS__cache_sinfo_deserialize(const void *_image, size_t H5_ATTR_NDEBUG_UNUSED l
     UINT32DECODE(chksum_image, stored_chksum);
 
     /* Sanity check */
-    HDassert((image == chksum_image) || 
+    HDassert((image == chksum_image) ||
              ((size_t)((image - (const uint8_t *)_image) + (chksum_image - image))  == old_sect_size));
 
     /* Set return value */
@@ -1163,9 +1163,9 @@ H5FS__cache_sinfo_image_len(const void *_thing, size_t *image_len)
 /*-------------------------------------------------------------------------
  * Function:	H5FS__cache_sinfo_pre_serialize
  *
- * Purpose:	The objective of this function is to test to see if file space 
- *		for the section info is located in temporary (AKA imaginary) file 
- *		space.  If it is, relocate file space for the section info to 
+ * Purpose:	The objective of this function is to test to see if file space
+ *		for the section info is located in temporary (AKA imaginary) file
+ *		space.  If it is, relocate file space for the section info to
  *		regular file space.
  *
  * Return:	Success:	SUCCEED
@@ -1176,9 +1176,9 @@ H5FS__cache_sinfo_image_len(const void *_thing, size_t *image_len)
  *
  *-------------------------------------------------------------------------
  */
-static herr_t 
+static herr_t
 H5FS__cache_sinfo_pre_serialize(H5F_t *f, void *_thing, haddr_t addr,
-    size_t H5_ATTR_NDEBUG_UNUSED len, haddr_t *new_addr, size_t H5_ATTR_NDEBUG_UNUSED *new_len, 
+    size_t H5_ATTR_NDEBUG_UNUSED len, haddr_t *new_addr, size_t H5_ATTR_NDEBUG_UNUSED *new_len,
     unsigned *flags)
 {
     H5FS_sinfo_t 	*sinfo = (H5FS_sinfo_t *)_thing;        /* Pointer to the object */
@@ -1249,8 +1249,8 @@ done:
  * Function:	H5FS__cache_sinfo_serialize
  *
  * Purpose:	Given an instance of H5FS_sinfo_t and a suitably sized buffer,
- *		serialize the contents of the instance of H5FS_sinfo_t and write 
- *		its contents to the buffer.  This buffer will be used to write 
+ *		serialize the contents of the instance of H5FS_sinfo_t and write
+ *		its contents to the buffer.  This buffer will be used to write
  *		the image of the instance to file.
  *
  * Return:	Success:	SUCCEED
@@ -1261,7 +1261,7 @@ done:
  *
  *-------------------------------------------------------------------------
  */
-static herr_t 
+static herr_t
 H5FS__cache_sinfo_serialize(const H5F_t *f, void *_image, size_t len,
     void *_thing)
 {
@@ -1348,7 +1348,7 @@ H5FS__cache_sinfo_notify(H5AC_notify_action_t action, void *_thing)
     herr_t ret_value = SUCCEED;         /* Return value */
 
     FUNC_ENTER_PACKAGE
-    
+
     /* Sanity check */
     HDassert(sinfo);
 
@@ -1396,7 +1396,7 @@ done:
 /*-------------------------------------------------------------------------
  * Function:	H5FS__cache_sinfo_free_icr
  *
- * Purpose:	Free the memory used for the in core representation of the 
+ * Purpose:	Free the memory used for the in core representation of the
  *		free space manager section info.
  *
  * Note:	The metadata cache sets the object's cache_info.magic to
@@ -1411,7 +1411,7 @@ done:
  *
  *-------------------------------------------------------------------------
  */
-static herr_t 
+static herr_t
 H5FS__cache_sinfo_free_icr(void *_thing)
 {
     H5FS_sinfo_t        *sinfo = (H5FS_sinfo_t *)_thing;    /* Pointer to the object */
diff --git a/src/H5FSint.c b/src/H5FSint.c
index 264950d..6ba5748 100644
--- a/src/H5FSint.c
+++ b/src/H5FSint.c
@@ -121,7 +121,7 @@ H5FS__create_flush_depend(H5AC_info_t *parent_entry, H5AC_info_t *child_entry)
     herr_t ret_value = SUCCEED;         /* Return value */
 
     FUNC_ENTER_NOAPI_NOINIT
-    
+
     /* Sanity check */
     HDassert(parent_entry);
     HDassert(child_entry);
@@ -153,7 +153,7 @@ H5FS__destroy_flush_depend(H5AC_info_t *parent_entry, H5AC_info_t *child_entry)
     herr_t ret_value = SUCCEED;         /* Return value */
 
     FUNC_ENTER_NOAPI_NOINIT
-    
+
     /* Sanity check */
     HDassert(parent_entry);
     HDassert(child_entry);
@@ -161,7 +161,7 @@ H5FS__destroy_flush_depend(H5AC_info_t *parent_entry, H5AC_info_t *child_entry)
     /* Destroy a flush dependency between parent and child entry */
     if(H5AC_destroy_flush_dependency(parent_entry, child_entry) < 0)
         HGOTO_ERROR(H5E_FSPACE, H5E_CANTUNDEPEND, FAIL, "unable to destroy flush dependency")
-        
+
 done:
     FUNC_LEAVE_NOAPI(ret_value)
 }   /* end H5FS__destroy_flush_depend() */
diff --git a/src/H5FSsection.c b/src/H5FSsection.c
index cf4a587..d783901 100644
--- a/src/H5FSsection.c
+++ b/src/H5FSsection.c
@@ -307,9 +307,9 @@ HDfprintf(stderr, "%s: fspace->alloc_sect_size = %Hu, fspace->sect_size = %Hu\n"
  * Purpose:     Release the section info, either giving ownership back to
  *              the cache or letting the free space header keep it.
  *
- *              Add the fix in this routine to resolve the potential infinite loop 
- *              problem when allocating file space for the meta data of the 
- *              self-referential free-space managers at file closing. 
+ *              Add the fix in this routine to resolve the potential infinite loop
+ *              problem when allocating file space for the meta data of the
+ *              self-referential free-space managers at file closing.
  *
  *              On file close or flushing, when the section info is modified
  *              and protected/unprotected, does not allow the section info size
@@ -317,8 +317,8 @@ HDfprintf(stderr, "%s: fspace->alloc_sect_size = %Hu, fspace->sect_size = %Hu\n"
  *              --if the current allocated section info size in fspace->sect_size is
  *                larger than the previous section info size in fpsace->alloc_sect_size,
  *                 release the section info
- *              --Otherwise, set the fspace->sect_size to be the same as 
- *                fpsace->alloc_sect_size.  This means fspace->sect_size may be larger 
+ *              --Otherwise, set the fspace->sect_size to be the same as
+ *                fpsace->alloc_sect_size.  This means fspace->sect_size may be larger
  *                than what is actually needed.
  *
  * Return:      SUCCEED/FAIL
@@ -439,7 +439,7 @@ HDfprintf(stderr, "%s: Relinquishing section info ownership\n", FUNC);
                 /* Check if we need to release section info in the file */
                 if(H5F_addr_defined(fspace->sect_addr)) {
                     /* Set flag to release section info space in file */
-                    /* On file close or flushing, only need to release section info with size 
+                    /* On file close or flushing, only need to release section info with size
                        bigger than previous section */
                     if(closing_or_flushing) {
                         if(fspace->sect_size > fspace->alloc_sect_size)
@@ -1248,7 +1248,7 @@ H5FS__sect_merge(H5FS_t *fspace, H5FS_section_info_t **sect, void *op_data)
 
                         /* Retarget section pointer to 'less than' node that was merged into */
                         *sect = tmp_sect;
-			if(*sect == NULL) 
+			if(*sect == NULL)
 			    HGOTO_DONE(ret_value);
 
                         /* Indicate successful merge occurred */
@@ -1293,7 +1293,7 @@ H5FS__sect_merge(H5FS_t *fspace, H5FS_section_info_t **sect, void *op_data)
                             HGOTO_ERROR(H5E_FSPACE, H5E_CANTINSERT, FAIL, "can't merge two sections")
 
                         /* It's possible that the merge caused the section to be deleted (particularly in the paged allocation case) */
-                        if(*sect == NULL) 
+                        if(*sect == NULL)
                             HGOTO_DONE(ret_value);
 
                         /* Indicate successful merge occurred */
@@ -2457,22 +2457,22 @@ done:
  *              The previous hack in this routine to avoid the potential infinite
  *              loops by allocating file space directly from the end of the file
  *              is removed.  The allocation can now be done via the usual
- *              file space allocation call H5MF_alloc().  
+ *              file space allocation call H5MF_alloc().
  *
- *              The design flaw is addressed by not allowing the size 
- *              of section info to shrink.  This means, when trying to allocate 
- *              section info size X via H5MF_alloc() and the section info size 
+ *              The design flaw is addressed by not allowing the size
+ *              of section info to shrink.  This means, when trying to allocate
+ *              section info size X via H5MF_alloc() and the section info size
  *              after H5MF_alloc() changes to Y:
- *              --if Y is larger than X, free the just allocated file space X 
+ *              --if Y is larger than X, free the just allocated file space X
  *                via H5MF_xfree() and set fspace->sect_size to Y.
- *                This routine will be called again later from 
- *                H5MF_settle_meta_data_fsm() to allocate section info with the 
+ *                This routine will be called again later from
+ *                H5MF_settle_meta_data_fsm() to allocate section info with the
  *                larger fpsace->sect_size Y.
- *              --if Y is smaller than X, no further allocation is needed and 
+ *              --if Y is smaller than X, no further allocation is needed and
  *                fspace->sect_size and fspace->alloc_sect_size are set to X.
  *                This means fspace->sect_size may be larger than what is
  *                actually needed.
- *                
+ *
  *              This routine also re-inserts the header and section info in the
  *              metadata cache with this allocation.
  *
@@ -2510,7 +2510,7 @@ H5FS_vfd_alloc_hdr_and_section_info_if_needed(H5F_t *f, H5FS_t *fspace,
     HDassert(f->shared->fs_persist);
 
     /* At present, all free space strategies enable the free space managers.
-     * This will probably change -- at which point this assertion should 
+     * This will probably change -- at which point this assertion should
      * be revisited.
      */
     /* Updated: Only the following two strategies enable the free-space managers */
diff --git a/src/H5Fefc.c b/src/H5Fefc.c
index 264a623..77d29f5 100644
--- a/src/H5Fefc.c
+++ b/src/H5Fefc.c
@@ -895,7 +895,7 @@ H5F__efc_try_close(H5F_t *f)
         HGOTO_DONE(SUCCEED)
 
     /* If the file EFC were locked, that should always mean that there exists
-     * a reference to this file that is not in an EFC (it may have just been 
+     * a reference to this file that is not in an EFC (it may have just been
      * removed from an EFC), and should have been caught by the above check */
     /* If we get here then we must be beginning a new run.  Make sure that the
      * temporary variables in f->shared->efc are at the default value */
diff --git a/src/H5Fint.c b/src/H5Fint.c
index 0000512..e4c8229 100644
--- a/src/H5Fint.c
+++ b/src/H5Fint.c
@@ -3033,7 +3033,7 @@ H5F_set_retries(H5F_t *f)
     /* Initialize the # of bins for retries */
     f->shared->retries_nbins = 0;
     if(f->shared->read_attempts > 1) {
-        /* Use HDceil to ensure that the log10 value is rounded up to the 
+        /* Use HDceil to ensure that the log10 value is rounded up to the
            nearest integer before casting to unsigned */
         tmp = HDceil(HDlog10((double)f->shared->read_attempts));
         f->shared->retries_nbins = (unsigned)tmp;
diff --git a/src/H5Fpkg.h b/src/H5Fpkg.h
index b85305e..46185ff 100644
--- a/src/H5Fpkg.h
+++ b/src/H5Fpkg.h
@@ -80,17 +80,17 @@
         + 1) /* superblock version */
 
 /* The H5F_SUPERBLOCK_MINIMAL_VARLEN_SIZE is the minimal amount of super block
- * variable length data guarnateed to load the sizeof offsets and the sizeof 
+ * variable length data guarnateed to load the sizeof offsets and the sizeof
  * lengths fields in all versions of the superblock.
  *
- * This is necessary in the V3 cache, as on the initial load, we need to 
+ * This is necessary in the V3 cache, as on the initial load, we need to
  * get enough of the superblock to determine its version and size so that
- * the metadata cache can load the correct amount of data from file to 
+ * the metadata cache can load the correct amount of data from file to
  * allow the second deserialization attempt to succeed.
  *
- * The value selected will have to be revisited for each new version 
+ * The value selected will have to be revisited for each new version
  * of the super block.  Note that the current value is one byte larger
- * than it needs to be. 
+ * than it needs to be.
  */
 #define H5F_SUPERBLOCK_MINIMAL_VARLEN_SIZE	7
 
@@ -166,8 +166,8 @@ typedef struct H5F_superblock_cache_ud_t {
     unsigned btree_k[H5B_NUM_BTREE_ID]; /* B-tree key values for each type */
     haddr_t stored_eof;     /* End-of-file in file */
     hbool_t drvrinfo_removed; /* Indicate if the driver info was removed */
-    unsigned    super_vers;   /* Superblock version obtained in get_load_size callback. 
-			       * It will be used later in verify_chksum callback 
+    unsigned    super_vers;   /* Superblock version obtained in get_load_size callback.
+			       * It will be used later in verify_chksum callback
 			       */
 } H5F_superblock_cache_ud_t;
 
@@ -242,16 +242,16 @@ typedef struct H5F_super_t {
 struct H5F_shared_t {
     H5FD_t	*lf; 		/* Lower level file handle for I/O	*/
     H5F_super_t *sblock;        /* Pointer to (pinned) superblock for file */
-    H5O_drvinfo_t *drvinfo;	/* Pointer to the (pinned) driver info 
+    H5O_drvinfo_t *drvinfo;	/* Pointer to the (pinned) driver info
                                  * cache entry.  This field is only defined
                                  * for older versions of the super block,
                                  * and then only when a driver information
                                  * block is present.  At all other times
                                  * it should be NULL.
                                  */
-    hbool_t drvinfo_sb_msg_exists;  /* Convenience field used to track 
-                                     * whether the driver info superblock 
-                                     * extension message has been created 
+    hbool_t drvinfo_sb_msg_exists;  /* Convenience field used to track
+                                     * whether the driver info superblock
+                                     * extension message has been created
                                      * yet. This field should be TRUE iff the
                                      * superblock extension exists and contains
                                      * a driver info message.  Under all other
@@ -278,7 +278,7 @@ struct H5F_shared_t {
                                 /* metadata cache.  This structure is   */
                                 /* fixed at creation time and should    */
                                 /* not change thereafter.               */
-    H5AC_cache_image_config_t 
+    H5AC_cache_image_config_t
 		mdc_initCacheImageCfg;  /* initial configuration for the */
                                         /* generate metadata cache image on     */
                                         /* close option.  This structure is     */
@@ -318,7 +318,7 @@ struct H5F_shared_t {
     hsize_t     fs_threshold;	/* Free space section threshold 	*/
     hbool_t     fs_persist;     /* Free-space persist or not */
     unsigned    fs_version;     /* Free-space version: */
-                                /* It is used to update fsinfo message in the superblock 
+                                /* It is used to update fsinfo message in the superblock
                                    extension when closing down the free-space managers */
     hbool_t     use_tmp_space;  /* Whether temp. file space allocation is allowed */
     haddr_t	tmp_addr;       /* Next address to use for temp. space in the file */
diff --git a/src/H5Fsuper_cache.c b/src/H5Fsuper_cache.c
index f8a40b2..119548c 100644
--- a/src/H5Fsuper_cache.c
+++ b/src/H5Fsuper_cache.c
@@ -268,7 +268,7 @@ H5F__drvrinfo_prefix_decode(H5O_drvinfo_t *drvrinfo, char *drv_name,
     UINT32DECODE(image, drvrinfo->len);
 
     /* Driver name and/or version */
-    if(drv_name) { 
+    if(drv_name) {
         H5MM_memcpy(drv_name, (const char *)image, (size_t)8);
         drv_name[8] = '\0';
         image += 8; /* advance past name/version */
@@ -369,7 +369,7 @@ H5F__cache_superblock_get_final_load_size(const void *_image, size_t H5_ATTR_NDE
     udata->super_vers = sblock.super_vers;
 
     /* Set the final size for the cache image */
-    *actual_len = H5F_SUPERBLOCK_FIXED_SIZE + 
+    *actual_len = H5F_SUPERBLOCK_FIXED_SIZE +
             (size_t)H5F_SUPERBLOCK_VARLEN_SIZE(sblock.super_vers, sblock.sizeof_addr, sblock.sizeof_size);
 
 done:
@@ -380,7 +380,7 @@ done:
 /*-------------------------------------------------------------------------
  * Function:    H5F__cache_superblock_verify_chksum
  *
- * Purpose:	Verify the computed checksum of the data structure is the 
+ * Purpose:	Verify the computed checksum of the data structure is the
  *		same as the stored chksum.
  *
  * Return:      Success:        TRUE/FALSE
@@ -584,14 +584,14 @@ H5F__cache_superblock_deserialize(const void *_image, size_t H5_ATTR_NDEBUG_UNUS
 	H5F_addr_decode(udata->f, (const uint8_t **)&image, &udata->stored_eof/*out*/);
 	H5F_addr_decode(udata->f, (const uint8_t **)&image, &sblock->root_addr/*out*/);
 
-	/* checksum verification already done in verify_chksum cb */		
+	/* checksum verification already done in verify_chksum cb */
 
 	/* Decode checksum */
 	UINT32DECODE(image, read_chksum);
 
 	/* The Driver Information Block may not appear with the version
-	 * 2 super block.  Thus we set the driver_addr field of the in 
-         * core representation of the super block HADDR_UNDEF to prevent 
+	 * 2 super block.  Thus we set the driver_addr field of the in
+         * core representation of the super block HADDR_UNDEF to prevent
          * any attempt to load the Driver Information Block.
 	 */
 	sblock->driver_addr = HADDR_UNDEF;
@@ -675,11 +675,11 @@ H5F__cache_superblock_serialize(const H5F_t *f, void *_image, size_t H5_ATTR_UNU
     HDassert(image);
     HDassert(sblock);
 
-    /* Assert that the superblock is marked as being flushed last (and 
+    /* Assert that the superblock is marked as being flushed last (and
        collectively in parallel) */
     /* (We'll rely on the cache to make sure it actually *is* flushed
        last (and collectively in parallel), but this check doesn't hurt) */
-    HDassert(sblock->cache_info.flush_me_last);    
+    HDassert(sblock->cache_info.flush_me_last);
 
     /* Encode the common portion of the file superblock for all versions */
     H5MM_memcpy(image, H5F_SIGNATURE, (size_t)H5F_SIGNATURE_LEN);
diff --git a/src/H5G.c b/src/H5G.c
index a766e8a..bcc33bb 100644
--- a/src/H5G.c
+++ b/src/H5G.c
@@ -782,7 +782,7 @@ H5Gflush(hid_t group_id)
 
     FUNC_ENTER_API(FAIL)
     H5TRACE1("e", "i", group_id);
-    
+
     /* Check args */
     if(NULL == (vol_obj = (H5VL_object_t *)H5I_object_verify(group_id, H5I_GROUP)))
         HGOTO_ERROR(H5E_ARGS, H5E_BADTYPE, FAIL, "not a group ID")
diff --git a/src/H5Gcache.c b/src/H5Gcache.c
index 0ffdc53..13a33a3 100644
--- a/src/H5Gcache.c
+++ b/src/H5Gcache.c
@@ -114,7 +114,7 @@ H5FL_SEQ_EXTERN(H5G_entry_t);
 /*-------------------------------------------------------------------------
  * Function:    H5G__cache_node_get_initial_load_size()
  *
- * Purpose:	Determine the size of the on-disk image of the node, and 
+ * Purpose:	Determine the size of the on-disk image of the node, and
  *		return this value in *image_len.
  *
  * Return:      Success:        SUCCEED
@@ -150,10 +150,10 @@ H5G__cache_node_get_initial_load_size(void *_udata, size_t *image_len)
  *		node, allocate an instance of H5G_node_t, load the contence of the
  *		image into it, and return a pointer to the instance.
  *
- *		Note that deserializing the image requires access to the file 
- *		pointer, which is not included in the parameter list for this 
- *		callback.  Finesse this issue by passing in the file pointer 
- *		twice to the H5AC_protect() call -- once as the file pointer 
+ *		Note that deserializing the image requires access to the file
+ *		pointer, which is not included in the parameter list for this
+ *		callback.  Finesse this issue by passing in the file pointer
+ *		twice to the H5AC_protect() call -- once as the file pointer
  *		proper, and again as the user data
  *
  * Return:      Success:        Pointer to in core representation
diff --git a/src/H5Gcompact.c b/src/H5Gcompact.c
index 7e2b324..1a76012 100644
--- a/src/H5Gcompact.c
+++ b/src/H5Gcompact.c
@@ -60,7 +60,7 @@ typedef struct {
 
 /* PRIVATE PROTOTYPES */
 static herr_t H5G__compact_build_table_cb(const void *_mesg, unsigned idx, void *_udata);
-static herr_t H5G__compact_build_table(const H5O_loc_t *oloc, 
+static herr_t H5G__compact_build_table(const H5O_loc_t *oloc,
     const H5O_linfo_t *linfo, H5_index_t idx_type, H5_iter_order_t order,
     H5G_link_table_t *ltable);
 static herr_t H5G__compact_lookup_cb(const void *_mesg, unsigned H5_ATTR_UNUSED idx, void *_udata);
diff --git a/src/H5Gint.c b/src/H5Gint.c
index a3849a6..0f9f9cb 100644
--- a/src/H5Gint.c
+++ b/src/H5Gint.c
@@ -496,9 +496,9 @@ H5G_close(H5G_t *grp)
 
         /* Evict group metadata if evicting on close */
         if(!file_closed && H5F_SHARED(grp->oloc.file) && H5F_EVICT_ON_CLOSE(grp->oloc.file)) {
-            if(H5AC_flush_tagged_metadata(grp->oloc.file, grp->oloc.addr) < 0) 
+            if(H5AC_flush_tagged_metadata(grp->oloc.file, grp->oloc.addr) < 0)
                 HGOTO_ERROR(H5E_CACHE, H5E_CANTFLUSH, FAIL, "unable to flush tagged metadata")
-            if(H5AC_evict_tagged_metadata(grp->oloc.file, grp->oloc.addr, FALSE) < 0) 
+            if(H5AC_evict_tagged_metadata(grp->oloc.file, grp->oloc.addr, FALSE) < 0)
                 HGOTO_ERROR(H5E_CACHE, H5E_CANTFLUSH, FAIL, "unable to evict tagged metadata")
         } /* end if */
 
diff --git a/src/H5Gnode.c b/src/H5Gnode.c
index 35b90f3..9faa0b5 100644
--- a/src/H5Gnode.c
+++ b/src/H5Gnode.c
@@ -538,7 +538,7 @@ H5G_node_found(H5F_t *f, haddr_t addr, const void H5_ATTR_UNUSED *_lt_key,
     rt = sn->nsyms;
     while(lt < rt && cmp) {
         idx = (lt + rt) / 2;
-        
+
         if((s = (const char *)H5HL_offset_into(udata->common.heap, sn->entry[idx].name_off)) == NULL)
             HGOTO_ERROR(H5E_SYM, H5E_CANTGET, FAIL, "unable to get symbol table name")
         cmp = HDstrcmp(udata->common.name, s);
@@ -1449,7 +1449,7 @@ done:
  *-------------------------------------------------------------------------
  */
 herr_t
-H5G__node_iterate_size(H5F_t *f, const void H5_ATTR_UNUSED *_lt_key, 
+H5G__node_iterate_size(H5F_t *f, const void H5_ATTR_UNUSED *_lt_key,
     haddr_t H5_ATTR_UNUSED addr, const void H5_ATTR_UNUSED *_rt_key, void *_udata)
 {
     hsize_t     *stab_size = (hsize_t *)_udata;         /* User data */
diff --git a/src/H5Gpkg.h b/src/H5Gpkg.h
index 6dc025c..8ad03d0 100644
--- a/src/H5Gpkg.h
+++ b/src/H5Gpkg.h
@@ -372,7 +372,7 @@ H5_DLL ssize_t H5G__stab_get_name_by_idx(const H5O_loc_t *oloc, H5_iter_order_t
     hsize_t n, char* name, size_t size);
 H5_DLL herr_t H5G__stab_remove(const H5O_loc_t *oloc, H5RS_str_t *grp_full_path_r,
     const char *name);
-H5_DLL herr_t H5G__stab_remove_by_idx(const H5O_loc_t *oloc, 
+H5_DLL herr_t H5G__stab_remove_by_idx(const H5O_loc_t *oloc,
     H5RS_str_t *grp_full_path_r, H5_iter_order_t order, hsize_t n);
 H5_DLL herr_t H5G__stab_lookup(const H5O_loc_t *grp_oloc, const char *name,
     H5O_link_t *lnk);
@@ -434,7 +434,7 @@ H5_DLL ssize_t H5G__compact_get_name_by_idx(const H5O_loc_t *oloc,
     hsize_t idx, char *name, size_t size);
 H5_DLL herr_t H5G__compact_remove(const H5O_loc_t *oloc, H5RS_str_t *grp_full_path_r,
     const char *name);
-H5_DLL herr_t H5G__compact_remove_by_idx(const H5O_loc_t *oloc, 
+H5_DLL herr_t H5G__compact_remove_by_idx(const H5O_loc_t *oloc,
     const H5O_linfo_t *linfo, H5RS_str_t *grp_full_path_r, H5_index_t idx_type,
     H5_iter_order_t order, hsize_t n);
 H5_DLL herr_t H5G__compact_iterate(const H5O_loc_t *oloc,
diff --git a/src/H5Gprivate.h b/src/H5Gprivate.h
index 19b120c..501c883 100644
--- a/src/H5Gprivate.h
+++ b/src/H5Gprivate.h
@@ -216,7 +216,7 @@ H5_DLL herr_t H5G_iterate(H5G_loc_t *loc, const char *group_name,
 H5_DLL herr_t H5G_visit(H5G_loc_t *loc, const char *group_name,
     H5_index_t idx_type, H5_iter_order_t order, H5L_iterate2_t op, void *op_data);
 
-/* 
+/*
  * Functions that understand links in groups
  */
 H5_DLL herr_t H5G_link_to_info(const struct H5O_loc_t *link_loc, const struct H5O_link_t *lnk, H5L_info2_t *linfo);
diff --git a/src/H5Gtraverse.c b/src/H5Gtraverse.c
index 0f27880..5a4380d 100644
--- a/src/H5Gtraverse.c
+++ b/src/H5Gtraverse.c
@@ -843,9 +843,9 @@ H5G_traverse(const H5G_loc_t *loc, const char *name, unsigned target, H5G_traver
 
     /* Set up invalid tag. This is a precautionary step only. Setting an invalid
      * tag here will ensure that no metadata accessed while doing the traversal
-     * is given an improper tag, unless another one is specifically set up 
-     * first. This will ensure we're not accidentally tagging something we 
-     * shouldn't be during the traversal. Note that for best tagging assertion 
+     * is given an improper tag, unless another one is specifically set up
+     * first. This will ensure we're not accidentally tagging something we
+     * shouldn't be during the traversal. Note that for best tagging assertion
      * coverage, setting H5C_DO_TAGGING_SANITY_CHECKS is advised.
      */
     H5_BEGIN_TAG(H5AC__INVALID_TAG);
diff --git a/src/H5HFbtree2.c b/src/H5HFbtree2.c
index 5807c56..479c2bd 100644
--- a/src/H5HFbtree2.c
+++ b/src/H5HFbtree2.c
@@ -360,7 +360,7 @@ H5HF__huge_bt2_indir_compare(const void *_rec1, const void *_rec2, int *result)
 {
     FUNC_ENTER_STATIC_NOERR
 
-    *result = (int)(((const H5HF_huge_bt2_indir_rec_t *)_rec1)->id - 
+    *result = (int)(((const H5HF_huge_bt2_indir_rec_t *)_rec1)->id -
                     ((const H5HF_huge_bt2_indir_rec_t *)_rec2)->id);
 
     FUNC_LEAVE_NOAPI(SUCCEED)
@@ -563,7 +563,7 @@ H5HF__huge_bt2_filt_indir_compare(const void *_rec1, const void *_rec2, int *res
 {
     FUNC_ENTER_STATIC_NOERR
 
-    *result = (int)(((const H5HF_huge_bt2_filt_indir_rec_t *)_rec1)->id - 
+    *result = (int)(((const H5HF_huge_bt2_filt_indir_rec_t *)_rec1)->id -
                     ((const H5HF_huge_bt2_filt_indir_rec_t *)_rec2)->id);
 
     FUNC_LEAVE_NOAPI(SUCCEED)
diff --git a/src/H5HFcache.c b/src/H5HFcache.c
index 4a2ff91..8dbdf25 100644
--- a/src/H5HFcache.c
+++ b/src/H5HFcache.c
@@ -77,35 +77,35 @@ static herr_t H5HF__cache_hdr_get_final_load_size(const void *image_ptr,
     size_t image_len, void *udata, size_t *actual_len);
 static htri_t H5HF__cache_hdr_verify_chksum(const void *image_ptr, size_t len, void *udata_ptr);
 static void *H5HF__cache_hdr_deserialize(const void *image, size_t len,
-    void *udata, hbool_t *dirty); 
+    void *udata, hbool_t *dirty);
 static herr_t H5HF__cache_hdr_image_len(const void *thing, size_t *image_len);
 static herr_t H5HF__cache_hdr_pre_serialize(H5F_t *f, void *thing, haddr_t addr,
-    size_t len, haddr_t *new_addr, size_t *new_len, unsigned *flags); 
+    size_t len, haddr_t *new_addr, size_t *new_len, unsigned *flags);
 static herr_t H5HF__cache_hdr_serialize(const H5F_t *f, void *image,
-    size_t len, void *thing); 
+    size_t len, void *thing);
 static herr_t H5HF__cache_hdr_free_icr(void *thing);
 
 static herr_t H5HF__cache_iblock_get_initial_load_size(void *udata, size_t *image_len);
 static htri_t H5HF__cache_iblock_verify_chksum(const void *image_ptr, size_t len, void *udata_ptr);
 static void *H5HF__cache_iblock_deserialize(const void *image, size_t len,
-    void *udata, hbool_t *dirty); 
+    void *udata, hbool_t *dirty);
 static herr_t H5HF__cache_iblock_image_len(const void *thing, size_t *image_len);
 static herr_t H5HF__cache_iblock_pre_serialize(H5F_t *f, void *thing,
-    haddr_t addr, size_t len, haddr_t *new_addr, size_t *new_len, unsigned *flags); 
+    haddr_t addr, size_t len, haddr_t *new_addr, size_t *new_len, unsigned *flags);
 static herr_t H5HF__cache_iblock_serialize(const H5F_t *f, void *image,
-    size_t len, void *thing); 
-static herr_t H5HF__cache_iblock_notify(H5AC_notify_action_t action, void *thing); 
+    size_t len, void *thing);
+static herr_t H5HF__cache_iblock_notify(H5AC_notify_action_t action, void *thing);
 static herr_t H5HF__cache_iblock_free_icr(void *thing);
 
 static herr_t H5HF__cache_dblock_get_initial_load_size(void *udata, size_t *image_len);
 static htri_t H5HF__cache_dblock_verify_chksum(const void *image_ptr, size_t len, void *udata_ptr);
 static void *H5HF__cache_dblock_deserialize(const void *image, size_t len,
-    void *udata, hbool_t *dirty); 
+    void *udata, hbool_t *dirty);
 static herr_t H5HF__cache_dblock_image_len(const void *thing, size_t *image_len);
 static herr_t H5HF__cache_dblock_pre_serialize(H5F_t *f, void *thing, haddr_t addr,
-    size_t len, haddr_t *new_addr, size_t *new_len, unsigned *flags); 
+    size_t len, haddr_t *new_addr, size_t *new_len, unsigned *flags);
 static herr_t H5HF__cache_dblock_serialize(const H5F_t *f, void *image,
-    size_t len, void *thing); 
+    size_t len, void *thing);
 static herr_t H5HF__cache_dblock_notify(H5AC_notify_action_t action, void *thing);
 static herr_t H5HF__cache_dblock_free_icr(void *thing);
 static herr_t H5HF__cache_dblock_fsf_size(const void *_thing, hsize_t *fsf_size);
@@ -114,14 +114,14 @@ static herr_t H5HF__cache_dblock_fsf_size(const void *_thing, hsize_t *fsf_size)
 #ifndef NDEBUG
 static herr_t H5HF__cache_verify_hdr_descendants_clean(H5F_t *f, H5HF_hdr_t *hdr,
     hbool_t *fd_clean, hbool_t *clean);
-static herr_t H5HF__cache_verify_iblock_descendants_clean(H5F_t *f, 
+static herr_t H5HF__cache_verify_iblock_descendants_clean(H5F_t *f,
     haddr_t fd_parent_addr, H5HF_indirect_t *iblock, unsigned *iblock_status,
     hbool_t *fd_clean, hbool_t *clean);
-static herr_t H5HF__cache_verify_iblocks_dblocks_clean(H5F_t *f, 
-    haddr_t fd_parent_addr, H5HF_indirect_t *iblock, hbool_t *fd_clean, 
+static herr_t H5HF__cache_verify_iblocks_dblocks_clean(H5F_t *f,
+    haddr_t fd_parent_addr, H5HF_indirect_t *iblock, hbool_t *fd_clean,
     hbool_t *clean, hbool_t *has_dblocks);
-static herr_t H5HF__cache_verify_descendant_iblocks_clean(H5F_t *f, 
-    haddr_t fd_parent_addr, H5HF_indirect_t *iblock, 
+static herr_t H5HF__cache_verify_descendant_iblocks_clean(H5F_t *f,
+    haddr_t fd_parent_addr, H5HF_indirect_t *iblock,
     hbool_t *fd_clean, hbool_t *clean, hbool_t *has_iblocks);
 #endif /* NDEBUG */
 
@@ -212,7 +212,7 @@ H5FL_BLK_DEFINE(direct_block);
  *
  *-------------------------------------------------------------------------
  */
-static herr_t 
+static herr_t
 H5HF__hdr_prefix_decode(H5HF_hdr_t *hdr, const uint8_t **image_ref)
 {
     const uint8_t *image = *image_ref;  /* Pointer into into supplied image */
@@ -351,8 +351,8 @@ H5HF__dtable_encode(H5F_t *f, uint8_t **pp, const H5HF_dtable_t *dtable)
  * Purpose:	Determine the size of the fractal heap header on disk,
  *		and set *image_len to this value.
  *
- *		Note also that the value returned by this function presumes that 
- *		there is no I/O filtering data in the header.  If there is, the 
+ *		Note also that the value returned by this function presumes that
+ *		there is no I/O filtering data in the header.  If there is, the
  *		size reported will be too small, and H5C_load_entry()
  *		will have to make two tries to load the fractal heap header.
  *
@@ -364,7 +364,7 @@ H5HF__dtable_encode(H5F_t *f, uint8_t **pp, const H5HF_dtable_t *dtable)
  *
  *-------------------------------------------------------------------------
  */
-static herr_t 
+static herr_t
 H5HF__cache_hdr_get_initial_load_size(void *_udata, size_t *image_len)
 {
     H5HF_hdr_cache_ud_t *udata = (H5HF_hdr_cache_ud_t *)_udata; /* Pointer to user data */
@@ -402,7 +402,7 @@ H5HF__cache_hdr_get_initial_load_size(void *_udata, size_t *image_len)
  *
  *-------------------------------------------------------------------------
  */
-static herr_t 
+static herr_t
 H5HF__cache_hdr_get_final_load_size(const void *_image, size_t H5_ATTR_NDEBUG_UNUSED image_len,
     void *_udata, size_t *actual_len)
 {
@@ -609,11 +609,11 @@ done:
 /*-------------------------------------------------------------------------
  * Function:	H5HF__cache_hdr_image_len
  *
- * Purpose:	Return the actual size of the fractal heap header on 
- *		disk image.  
+ * Purpose:	Return the actual size of the fractal heap header on
+ *		disk image.
  *
- *		If the header contains filter information, this size will be 
- *		larger than the value returned by H5HF__cache_hdr_get_initial_load_size().  
+ *		If the header contains filter information, this size will be
+ *		larger than the value returned by H5HF__cache_hdr_get_initial_load_size().
  *
  * Return:	Success:	SUCCEED
  *		Failure:	FAIL
@@ -623,7 +623,7 @@ done:
  *
  *-------------------------------------------------------------------------
  */
-static herr_t 
+static herr_t
 H5HF__cache_hdr_image_len(const void *_thing, size_t *image_len)
 {
     const H5HF_hdr_t  *hdr = (const H5HF_hdr_t *)_thing;    /* Fractal heap info */
@@ -645,13 +645,13 @@ H5HF__cache_hdr_image_len(const void *_thing, size_t *image_len)
 /*-------------------------------------------------------------------------
  * Function:	H5HF__cache_hdr_pre_serialize
  *
- * Purpose:	As best I can tell, fractal heap header blocks are always 
+ * Purpose:	As best I can tell, fractal heap header blocks are always
  *		allocated in real file space.  Thus this routine simply verifies
  *		this, verifies that the len parameter contains the expected
  *		value, and returns an error if either of these checks fail.
  *
  *		When compiled in debug mode, the function also verifies that all
- *		indirect and direct blocks that are children of the header are 
+ *		indirect and direct blocks that are children of the header are
  *		either clean, or not in the metadata cache.
  *
  * Return:	Success:	SUCCEED
@@ -662,7 +662,7 @@ H5HF__cache_hdr_image_len(const void *_thing, size_t *image_len)
  *
  *-------------------------------------------------------------------------
  */
-static herr_t 
+static herr_t
 H5HF__cache_hdr_pre_serialize(H5F_t *f, void *_thing, haddr_t addr, size_t len,
     haddr_t H5_ATTR_UNUSED *new_addr, size_t H5_ATTR_UNUSED *new_len,
     unsigned *flags)
@@ -706,8 +706,8 @@ H5HF__cache_hdr_pre_serialize(H5F_t *f, void *_thing, haddr_t addr, size_t len,
      * is made during a cache serialization instead of an entry or cache
      * flush.
      *
-     * Note also that with the recent change in the definition of flush 
-     * dependency, not all descendants need be clean -- only direct flush 
+     * Note also that with the recent change in the definition of flush
+     * dependency, not all descendants need be clean -- only direct flush
      * dependency children.
      *
      * Finally, observe that the H5HF__cache_verify_hdr_descendants_clean()
@@ -736,7 +736,7 @@ done:
 /*-------------------------------------------------------------------------
  * Function:	H5HF__cache_hdr_serialize
  *
- * Purpose:	Construct the on disk image of the header, and place it in 
+ * Purpose:	Construct the on disk image of the header, and place it in
  *		the buffer pointed to by image.  Return SUCCEED on success,
  *		and FAIL on failure.
  *
@@ -748,7 +748,7 @@ done:
  *
  *-------------------------------------------------------------------------
  */
-static herr_t 
+static herr_t
 H5HF__cache_hdr_serialize(const H5F_t *f, void *_image, size_t H5_ATTR_NDEBUG_UNUSED len,
     void *_thing)
 {
@@ -846,7 +846,7 @@ done:
  *
  * Purpose:	Free the in core representation of the fractal heap header.
  *
- *		This routine frees just the header itself, not the 
+ *		This routine frees just the header itself, not the
  *		associated version 2 B-Tree, the associated Free Space Manager,
  *		nor the indirect/direct block tree that is rooted in the header.
  *
@@ -865,7 +865,7 @@ done:
  *
  *-------------------------------------------------------------------------
  */
-static herr_t 
+static herr_t
 H5HF__cache_hdr_free_icr(void *_thing)
 {
     H5HF_hdr_t *hdr = (H5HF_hdr_t *)_thing;     /* Fractal heap info */
@@ -890,7 +890,7 @@ done:
 /*-------------------------------------------------------------------------
  * Function:	H5HF__cache_iblock_get_initial_load_size()
  *
- * Purpose:	Compute the size of the on disk image of the indirect 
+ * Purpose:	Compute the size of the on disk image of the indirect
  *		block, and place this value in *image_len.
  *
  * Return:	Success:	SUCCEED
@@ -901,7 +901,7 @@ done:
  *
  *-------------------------------------------------------------------------
  */
-static herr_t 
+static herr_t
 H5HF__cache_iblock_get_initial_load_size(void *_udata, size_t *image_len)
 {
     H5HF_iblock_cache_ud_t *udata = (H5HF_iblock_cache_ud_t *)_udata;   /* User data for callback */
@@ -913,7 +913,7 @@ H5HF__cache_iblock_get_initial_load_size(void *_udata, size_t *image_len)
     HDassert(udata->par_info);
     HDassert(udata->par_info->hdr);
     HDassert(image_len);
-   
+
     /* Set the image length size */
     *image_len = (size_t)H5HF_MAN_INDIRECT_SIZE(udata->par_info->hdr, *udata->nrows);
 
@@ -961,9 +961,9 @@ H5HF__cache_iblock_verify_chksum(const void *_image, size_t len, void H5_ATTR_UN
 /*-------------------------------------------------------------------------
  * Function:	H5HF__cache_iblock_deserialize
  *
- * Purpose:	Given a buffer containing the on disk image of the indirect 
- *		block, allocate an instance of H5HF_indirect_t, load the data 
- *		in the buffer into this new instance, and return a pointer to 
+ * Purpose:	Given a buffer containing the on disk image of the indirect
+ *		block, allocate an instance of H5HF_indirect_t, load the data
+ *		in the buffer into this new instance, and return a pointer to
  *		it.
  *
  *		As best I can tell, the size of the indirect block image is fully
@@ -979,7 +979,7 @@ H5HF__cache_iblock_verify_chksum(const void *_image, size_t len, void H5_ATTR_UN
  *-------------------------------------------------------------------------
  */
 static void *
-H5HF__cache_iblock_deserialize(const void *_image, size_t H5_ATTR_NDEBUG_UNUSED len, 
+H5HF__cache_iblock_deserialize(const void *_image, size_t H5_ATTR_NDEBUG_UNUSED len,
     void *_udata, hbool_t H5_ATTR_UNUSED *dirty)
 {
     H5HF_hdr_t          *hdr;           /* Shared fractal heap information */
@@ -1164,7 +1164,7 @@ done:
  *
  *-------------------------------------------------------------------------
  */
-static herr_t 
+static herr_t
 H5HF__cache_iblock_image_len(const void *_thing, size_t *image_len)
 {
     const H5HF_indirect_t *iblock = (const H5HF_indirect_t *)_thing;    /* Indirect block info */
@@ -1188,11 +1188,11 @@ H5HF__cache_iblock_image_len(const void *_thing, size_t *image_len)
  *
  * Purpose:	The primary objective of this function is to determine if the
  *		indirect block is currently allocated in temporary file space,
- *		and if so, to move it to real file space before the entry is 
+ *		and if so, to move it to real file space before the entry is
  *		serialized.
  *
- *		In debug compiles, this function also verifies that all 
- *		immediate flush dependency children of this indirect block 
+ *		In debug compiles, this function also verifies that all
+ *		immediate flush dependency children of this indirect block
  *		are either clean or are not in cache.
  *
  * Return:	Success:	SUCCEED
@@ -1203,7 +1203,7 @@ H5HF__cache_iblock_image_len(const void *_thing, size_t *image_len)
  *
  *-------------------------------------------------------------------------
  */
-static herr_t 
+static herr_t
 H5HF__cache_iblock_pre_serialize(H5F_t *f, void *_thing, haddr_t addr,
     size_t H5_ATTR_UNUSED len, haddr_t *new_addr, size_t H5_ATTR_UNUSED *new_len,
     unsigned *flags)
@@ -1237,7 +1237,7 @@ H5HF__cache_iblock_pre_serialize(H5F_t *f, void *_thing, haddr_t addr,
     unsigned 		 iblock_status = 0;
 
     /* verify that flush dependencies are working correctly.  Do this
-     * by verifying that all immediate flush dependency children of this 
+     * by verifying that all immediate flush dependency children of this
      * iblock are clean.
      */
     if(H5AC_get_entry_status(f, iblock->addr, &iblock_status) < 0)
@@ -1254,7 +1254,7 @@ H5HF__cache_iblock_pre_serialize(H5F_t *f, void *_thing, haddr_t addr,
 }
 #endif /* NDEBUG */
 
-    /* Check to see if we must re-allocate the iblock from temporary to 
+    /* Check to see if we must re-allocate the iblock from temporary to
      * normal (AKA real) file space.
      */
     if(H5F_IS_TMP_ADDR(f, addr)) {
@@ -1302,7 +1302,7 @@ H5HF__cache_iblock_pre_serialize(H5F_t *f, void *_thing, haddr_t addr,
 	*new_addr = iblock_addr;
         *flags = H5AC__SERIALIZE_MOVED_FLAG;
     } /* end if */
-    else 
+    else
 	*flags = 0;
 
 done:
@@ -1313,8 +1313,8 @@ done:
 /*-------------------------------------------------------------------------
  * Function:	H5HF__cache_iblock_serialize
  *
- * Purpose:	Given a pointer to an iblock, and a pointer to a buffer of 
- *		the appropriate size, write the contents of the iblock to the 
+ * Purpose:	Given a pointer to an iblock, and a pointer to a buffer of
+ *		the appropriate size, write the contents of the iblock to the
  *		buffer in format appropriate for writing to disk.
  *
  * Return:	Success:	SUCCEED
@@ -1325,7 +1325,7 @@ done:
  *
  *-------------------------------------------------------------------------
  */
-static herr_t 
+static herr_t
 H5HF__cache_iblock_serialize(const H5F_t *f, void *_image, size_t H5_ATTR_NDEBUG_UNUSED len,
     void *_thing)
 {
@@ -1390,7 +1390,7 @@ H5HF__cache_iblock_serialize(const H5F_t *f, void *_image, size_t H5_ATTR_NDEBUG
                 /* (either both the address & size are defined or both are
                  *  not defined)
                  */
-                HDassert((H5F_addr_defined(iblock->ents[u].addr) && iblock->filt_ents[u].size) 
+                HDassert((H5F_addr_defined(iblock->ents[u].addr) && iblock->filt_ents[u].size)
                         || (!H5F_addr_defined(iblock->ents[u].addr) && iblock->filt_ents[u].size == 0));
 
                 /* Size of filtered direct block */
@@ -1431,11 +1431,11 @@ H5HF__cache_iblock_serialize(const H5F_t *f, void *_image, size_t H5_ATTR_NDEBUG
 /*-------------------------------------------------------------------------
  * Function:	H5HF__cache_iblock_notify
  *
- * Purpose:	This function is used to create and destroy flush dependency 
+ * Purpose:	This function is used to create and destroy flush dependency
  *		relationships between iblocks and their parents as indirect blocks
  *		are loaded / inserted and evicted from the metadata cache.
  *
- *		In general, the parent will be another iblock, but it may be the 
+ *		In general, the parent will be another iblock, but it may be the
  *		header if the iblock in question is the root iblock.
  *
  * Return:	Success:	SUCCEED
@@ -1446,7 +1446,7 @@ H5HF__cache_iblock_serialize(const H5F_t *f, void *_image, size_t H5_ATTR_NDEBUG
  *
  *-------------------------------------------------------------------------
  */
-static herr_t 
+static herr_t
 H5HF__cache_iblock_notify(H5AC_notify_action_t action, void *_thing)
 {
     H5HF_indirect_t     *iblock = (H5HF_indirect_t *)_thing;    /* Indirect block info */
@@ -1528,7 +1528,7 @@ done:
 /*-------------------------------------------------------------------------
  * Function:	H5HF__cache_iblock_free_icr
  *
- * Purpose:	Unlink the supplied instance of H5HF_indirect_t from the 
+ * Purpose:	Unlink the supplied instance of H5HF_indirect_t from the
  *		fractal heap and free its memory.
  *
  * Note:	The metadata cache sets the object's cache_info.magic to
@@ -1543,7 +1543,7 @@ done:
  *
  *-------------------------------------------------------------------------
  */
-static herr_t 
+static herr_t
 H5HF__cache_iblock_free_icr(void *thing)
 {
     H5HF_indirect_t	*iblock = (H5HF_indirect_t *)thing;     /* Fractal heap indirect block to free */
@@ -1570,7 +1570,7 @@ done:
 /*-------------------------------------------------------------------------
  * Function:	H5HF__cache_dblock_get_initial_load_size()
  *
- * Purpose:	Determine the size of the direct block on disk image, and 
+ * Purpose:	Determine the size of the direct block on disk image, and
  *		return it in *image_len.
  *
  * Return:	Success:	SUCCEED
@@ -1581,7 +1581,7 @@ done:
  *
  *-------------------------------------------------------------------------
  */
-static herr_t 
+static herr_t
 H5HF__cache_dblock_get_initial_load_size(void *_udata, size_t *image_len)
 {
     const H5HF_dblock_cache_ud_t *udata = (const H5HF_dblock_cache_ud_t *)_udata;    /* User data for callback */
@@ -1612,7 +1612,7 @@ H5HF__cache_dblock_get_initial_load_size(void *_udata, size_t *image_len)
     }  /* end if */
     else
         *image_len = udata->dblock_size;
-    
+
     FUNC_LEAVE_NOAPI(SUCCEED)
 } /* end H5HF__cache_dblock_get_initial_load_size() */
 
@@ -1668,7 +1668,7 @@ H5HF__cache_dblock_verify_chksum(const void *_image, size_t len, void *_udata)
         filter_cb.func = NULL;      /* no callback function when failed */
 
         /* Allocate buffer to perform I/O filtering on and copy image into
-         * it.  Must do this as H5Z_pipeline() may re-size the buffer 
+         * it.  Must do this as H5Z_pipeline() may re-size the buffer
          * provided to it.
          */
         if(NULL == (read_buf = H5MM_malloc(len)))
@@ -1801,7 +1801,7 @@ H5HF__cache_dblock_deserialize(const void *_image, size_t len, void *_udata,
     /* Check for I/O filters on this heap */
     if(hdr->filter_len > 0) {
         /* Direct block is already decompressed in verify_chksum callback */
-        if(udata->decompressed) { 
+        if(udata->decompressed) {
             /* Sanity check */
             HDassert(udata->dblk);
 
@@ -1822,7 +1822,7 @@ H5HF__cache_dblock_deserialize(const void *_image, size_t len, void *_udata,
             filter_cb.func = NULL;      /* no callback function when failed */
 
             /* Allocate buffer to perform I/O filtering on and copy image into
-             * it.  Must do this as H5Z_pipeline() may resize the buffer 
+             * it.  Must do this as H5Z_pipeline() may resize the buffer
              * provided to it.
              */
             if (NULL == (read_buf = H5MM_malloc(len)))
@@ -1926,7 +1926,7 @@ done:
  * Function:	H5HF__cache_dblock_image_len
  *
  * Purpose:	Report the actual size of the direct block image on disk.
- *		Note that this value will probably be incorrect if compression 
+ *		Note that this value will probably be incorrect if compression
  *		is enabled and the entry is dirty.
  *
  * Return:	Success:	SUCCEED
@@ -1937,7 +1937,7 @@ done:
  *
  *-------------------------------------------------------------------------
  */
-static herr_t 
+static herr_t
 H5HF__cache_dblock_image_len(const void *_thing, size_t *image_len)
 {
     const H5HF_direct_t    *dblock = (const H5HF_direct_t *)_thing;     /* Direct block info */
@@ -1958,32 +1958,32 @@ H5HF__cache_dblock_image_len(const void *_thing, size_t *image_len)
 
     /* Check for I/O filters on this heap */
     if(hdr->filter_len > 0) {
-        /* 
+        /*
          * If the data is available, set to the compressed
-         * size of the direct block -- otherwise set it equal to the 
-         * uncompressed size.  
+         * size of the direct block -- otherwise set it equal to the
+         * uncompressed size.
          *
          * We have three possible scenarios here.
          *
          * First, the block may never have been flushed.  In this
-         * case, both dblock->file_size and the size stored in the 
-         * parent (either the header or the parent iblock) will all 
-         * be zero.  In this case, return the uncompressed size 
+         * case, both dblock->file_size and the size stored in the
+         * parent (either the header or the parent iblock) will all
+         * be zero.  In this case, return the uncompressed size
          * stored in dblock->size as the size.
          *
          * Second, the block may have just been serialized, in which
-         * case, dblock->file_size should be zero, and the correct 
+         * case, dblock->file_size should be zero, and the correct
          * on disk size should be stored in the parent (again, either
          * the header or the parent iblock as case may be).
-         * 
-         * Third, we may be in the process of discarding this 
+         *
+         * Third, we may be in the process of discarding this
          * dblock without writing it.  In this case, dblock->file_size
-         * should be non-zero and have the correct size.  Note that 
+         * should be non-zero and have the correct size.  Note that
          * in this case, the direct block will have been detached,
          * and thus looking up the parent will likely return incorrect
          * data.
          */
-        if(dblock->file_size != 0) 
+        if(dblock->file_size != 0)
             size = dblock->file_size;
         else {
             const H5HF_indirect_t  *par_iblock = dblock->parent; /* Parent iblock */
@@ -2012,54 +2012,54 @@ H5HF__cache_dblock_image_len(const void *_thing, size_t *image_len)
  * Function:	H5HF__cache_dblock_pre_serialize
  *
  * Purpose:	In principle, the purpose of this function is to determine
- *		the size and location of the disk image of the target direct 
+ *		the size and location of the disk image of the target direct
  *		block.  In this case, the uncompressed size of the block is
- *		fixed, but since the direct block could be compressed, 
+ *		fixed, but since the direct block could be compressed,
  *		we may need to compute and report the compressed size.
  *
- *		This is a bit sticky in the case of a direct block when I/O 
+ *		This is a bit sticky in the case of a direct block when I/O
  *		filters are enabled, as the size of the compressed version
- *		of the on disk image is not known until the direct block has 
- *		been run through the filters.  Further, the location of the 
- *		on disk image may change if the compressed size of the image 
+ *		of the on disk image is not known until the direct block has
+ *		been run through the filters.  Further, the location of the
+ *		on disk image may change if the compressed size of the image
  *		changes as well.
  *
- *		To complicate matters further, the direct block may have been 
- *		initially allocated in temporary (AKA imaginary) file space. 
- *		In this case, we must relocate the direct block's on-disk 
- *		image to "real" file space regardless of whether it has changed 
+ *		To complicate matters further, the direct block may have been
+ *		initially allocated in temporary (AKA imaginary) file space.
+ *		In this case, we must relocate the direct block's on-disk
+ *		image to "real" file space regardless of whether it has changed
  *		size.
  *
- *		One simplifying factor is the direct block's "blk" field, 
+ *		One simplifying factor is the direct block's "blk" field,
  *		which contains a pointer to a buffer which (with the exception
- *		of a small header) contains the on disk image in uncompressed 
+ *		of a small header) contains the on disk image in uncompressed
  *		form.
  *
- *		To square this particular circle, this function does 
- *		everything the serialize function usually does, with the 
- *		exception of copying the image into the image buffer provided 
- *		to the serialize function by the metadata cache.  The data to 
+ *		To square this particular circle, this function does
+ *		everything the serialize function usually does, with the
+ *		exception of copying the image into the image buffer provided
+ *		to the serialize function by the metadata cache.  The data to
  *		copy is provided to the serialize function in a buffer pointed
  *		to by the write_buf field.
  *
- *		If I/O filters are enabled, on exit, 
- *		H5HF__cache_dblock_pre_serialize() sets the write_buf field to 
+ *		If I/O filters are enabled, on exit,
+ *		H5HF__cache_dblock_pre_serialize() sets the write_buf field to
  *		point to a buffer containing the filtered image of the direct
  *		block.  The serialize function should free this block, and set
- *		the write_buf field to NULL after copying it into the image 
+ *		the write_buf field to NULL after copying it into the image
  *		buffer provided by the metadata cache.
  *
- *		If I/O filters are not enabled, this function prepares 
- *		the buffer pointed to by the blk field for copying to the 
- *		image buffer provided by the metadata cache, and sets the 
- *		write_buf field equal to the blk field.  In this case, the 
- *		serialize function should simply set the write_buf field to 
- *		NULL after copying the direct block image into the image 
+ *		If I/O filters are not enabled, this function prepares
+ *		the buffer pointed to by the blk field for copying to the
+ *		image buffer provided by the metadata cache, and sets the
+ *		write_buf field equal to the blk field.  In this case, the
+ *		serialize function should simply set the write_buf field to
+ *		NULL after copying the direct block image into the image
  *		buffer.
  *
- *		In both of the above cases, the length of the buffer pointed 
- *		to by write_buf is provided in the write_len field.  This 
- *		field must contain 0 on entry to this function, and should 
+ *		In both of the above cases, the length of the buffer pointed
+ *		to by write_buf is provided in the write_len field.  This
+ *		field must contain 0 on entry to this function, and should
  *		be set back to 0 at the end of the serialize function.
  *
  * Return:	Success:	SUCCEED
@@ -2070,7 +2070,7 @@ H5HF__cache_dblock_image_len(const void *_thing, size_t *image_len)
  *
  *-------------------------------------------------------------------------
  */
-static herr_t 
+static herr_t
 H5HF__cache_dblock_pre_serialize(H5F_t *f, void *_thing,
     haddr_t addr, size_t len, haddr_t *new_addr, size_t *new_len, unsigned *flags)
 {
@@ -2114,10 +2114,10 @@ H5HF__cache_dblock_pre_serialize(H5F_t *f, void *_thing,
     HDassert(hdr->cache_info.type == H5AC_FHEAP_HDR);
 
     if(dblock->parent) {
-	/* this is the common case, in which the direct block is the child 
+	/* this is the common case, in which the direct block is the child
          * of an indirect block.  Set up the convenience variables we will
-         * need if the address and/or compressed size of the on disk image 
-         * of the direct block changes, and do some sanity checking in 
+         * need if the address and/or compressed size of the on disk image
+         * of the direct block changes, and do some sanity checking in
          * passing.
          */
         par_iblock = dblock->parent;
@@ -2137,8 +2137,8 @@ H5HF__cache_dblock_pre_serialize(H5F_t *f, void *_thing,
     at_tmp_addr = H5F_IS_TMP_ADDR(f, addr);
 
     /* Begin by preping the direct block to be written to disk.  Do
-     * this by writing the correct magic number, the dblock version, 
-     * the address of the header, the offset of the block in the heap, 
+     * this by writing the correct magic number, the dblock version,
+     * the address of the header, the offset of the block in the heap,
      * and the checksum at the beginning of the block.
      */
 
@@ -2172,7 +2172,7 @@ H5HF__cache_dblock_pre_serialize(H5F_t *f, void *_thing,
         UINT32ENCODE(image, metadata_chksum);
     } /* end if */
 
-    /* at this point, dblock->blk should point to an uncompressed image of 
+    /* at this point, dblock->blk should point to an uncompressed image of
      * the direct block.  If I/O filters are not enabled, this image should
      * be ready to hand off to the metadata cache.
      */
@@ -2211,10 +2211,10 @@ H5HF__cache_dblock_pre_serialize(H5F_t *f, void *_thing,
         /* Use the compressed number of bytes as the size to write */
         write_size = nbytes;
 
-        /* If the size and/or location of the on disk image of the 
+        /* If the size and/or location of the on disk image of the
          * direct block changes, we must touch up its parent to reflect
          * these changes.  Do this differently depending on whether the
-         * direct block's parent is an indirect block or (rarely) the 
+         * direct block's parent is an indirect block or (rarely) the
          * fractal heap header.  In this case, the direct block is known
          * as a root direct block.
          */
@@ -2233,7 +2233,7 @@ H5HF__cache_dblock_pre_serialize(H5F_t *f, void *_thing,
                 hdr_changed = TRUE;
             } /* end if */
 
-            /* verify that the cache's last record of the compressed 
+            /* verify that the cache's last record of the compressed
              * size matches the heap's last record.  This value will
              * likely change shortly.
              */
@@ -2241,10 +2241,10 @@ H5HF__cache_dblock_pre_serialize(H5F_t *f, void *_thing,
 
             /* Check if we need to re-size the block on disk */
             if(hdr->pline_root_direct_size != write_size || at_tmp_addr) {
-                /* Check if the direct block is NOT currently allocated 
-                 * in temp. file space 
+                /* Check if the direct block is NOT currently allocated
+                 * in temp. file space
                  *
-                 * (temp. file space does not need to be freed) 
+                 * (temp. file space does not need to be freed)
                  */
                 if(!at_tmp_addr)
                     /* Release direct block's current disk space */
@@ -2255,8 +2255,8 @@ H5HF__cache_dblock_pre_serialize(H5F_t *f, void *_thing,
                 if(HADDR_UNDEF == (dblock_addr = H5MF_alloc((H5F_t *)f, H5FD_MEM_FHEAP_DBLOCK, (hsize_t)write_size)))
                     HGOTO_ERROR(H5E_HEAP, H5E_NOSPACE, FAIL, "file allocation failed for fractal heap direct block")
 
-                /* Update information about compressed direct block's 
-                 * location & size 
+                /* Update information about compressed direct block's
+                 * location & size
                  */
                 HDassert(hdr->man_dtable.table_addr == addr);
                 HDassert(hdr->pline_root_direct_size == len);
@@ -2285,7 +2285,7 @@ H5HF__cache_dblock_pre_serialize(H5F_t *f, void *_thing,
                 par_changed = TRUE;
             } /* end if */
 
-            /* verify that the cache's last record of the compressed 
+            /* verify that the cache's last record of the compressed
              * size matches the heap's last record.  This value will
              * likely change shortly.
              */
@@ -2293,10 +2293,10 @@ H5HF__cache_dblock_pre_serialize(H5F_t *f, void *_thing,
 
             /* Check if we need to re-size the block on disk */
             if(par_iblock->filt_ents[par_entry].size != write_size || at_tmp_addr) {
-                /* Check if the direct block is NOT currently allocated 
-                 * in temp. file space 
+                /* Check if the direct block is NOT currently allocated
+                 * in temp. file space
                  *
-                 * (temp. file space does not need to be freed) 
+                 * (temp. file space does not need to be freed)
                  */
                 if(!at_tmp_addr)
                     /* Release direct block's current disk space */
@@ -2307,8 +2307,8 @@ H5HF__cache_dblock_pre_serialize(H5F_t *f, void *_thing,
                 if(HADDR_UNDEF == (dblock_addr = H5MF_alloc((H5F_t *)f, H5FD_MEM_FHEAP_DBLOCK, (hsize_t)write_size)))
                     HGOTO_ERROR(H5E_HEAP, H5E_NOSPACE, FAIL, "file allocation failed for fractal heap direct block")
 
-                /* Update information about compressed direct block's 
-                 * location & size 
+                /* Update information about compressed direct block's
+                 * location & size
                  */
                 HDassert(par_iblock->ents[par_entry].addr == addr);
                 HDassert(par_iblock->filt_ents[par_entry].size == len);
@@ -2326,21 +2326,21 @@ H5HF__cache_dblock_pre_serialize(H5F_t *f, void *_thing,
         } /* end else */
     } /* end if */
     else {
-        /* I/O filters are not enabled -- thus all we need to do is check to 
-         * see if the direct block is in temporary (AKA imaginary) file 
+        /* I/O filters are not enabled -- thus all we need to do is check to
+         * see if the direct block is in temporary (AKA imaginary) file
          * space, and move it to real file space if it is.
          *
-         * As in the I/O filters case above, we will have to touch up the 
+         * As in the I/O filters case above, we will have to touch up the
          * direct blocks parent if the direct block is relocated.
          *
-         * Recall that temporary file space need not be freed, which 
+         * Recall that temporary file space need not be freed, which
          * simplifies matters slightly.
          */
         write_buf = dblock->blk;
         write_size = dblock->size;
 
-        /* Check to see if we must re-allocate direct block from 'temp.' 
-         * to 'normal' file space 
+        /* Check to see if we must re-allocate direct block from 'temp.'
+         * to 'normal' file space
          */
         if(at_tmp_addr) {
             /* Allocate 'normal' space for the direct block */
@@ -2377,9 +2377,9 @@ H5HF__cache_dblock_pre_serialize(H5F_t *f, void *_thing,
         } /* end if */
     } /* end else */
 
-    /* At this point, write_buf points to a buffer containing the image 
+    /* At this point, write_buf points to a buffer containing the image
      * of the direct block that is ready to copy into the image buffer,
-     * and write_size contains the length of this buffer. 
+     * and write_size contains the length of this buffer.
      *
      * Also, if image size or address has changed, the direct block's
      * parent has been modified to reflect the change.
@@ -2419,14 +2419,14 @@ done:
 /*-------------------------------------------------------------------------
  * Function:	H5HF__cache_dblock_serialize
  *
- * Purpose:	In principle, this function is supposed to construct the on 
- *		disk image of the direct block, and place that image in the 
+ * Purpose:	In principle, this function is supposed to construct the on
+ *		disk image of the direct block, and place that image in the
  *		image buffer provided by the metadata cache.
  *
- *		However, since there are cases in which the pre_serialize 
- *		function has to construct the on disk image to determine its size 
+ *		However, since there are cases in which the pre_serialize
+ *		function has to construct the on disk image to determine its size
  *		and address, this function simply copies the image prepared by
- *		the pre-serialize function into the supplied image buffer, and 
+ *		the pre-serialize function into the supplied image buffer, and
  *		discards a buffer if necessary.
  *
  * Return:	Success:	SUCCEED
@@ -2437,8 +2437,8 @@ done:
  *
  *-------------------------------------------------------------------------
  */
-static herr_t 
-H5HF__cache_dblock_serialize(const H5F_t H5_ATTR_NDEBUG_UNUSED *f, void *image, 
+static herr_t
+H5HF__cache_dblock_serialize(const H5F_t H5_ATTR_NDEBUG_UNUSED *f, void *image,
     size_t H5_ATTR_NDEBUG_UNUSED len, void *_thing)
 {
     H5HF_direct_t       *dblock = (H5HF_direct_t *)_thing;      /* Direct block info */
@@ -2462,8 +2462,8 @@ H5HF__cache_dblock_serialize(const H5F_t H5_ATTR_NDEBUG_UNUSED *f, void *image,
     /* Copy the image from *(dblock->write_buf) to *image */
     H5MM_memcpy(image, dblock->write_buf, dblock->write_size);
 
-    /* Free *(dblock->write_buf) if it was allocated by the 
-     * pre-serialize function 
+    /* Free *(dblock->write_buf) if it was allocated by the
+     * pre-serialize function
      */
     if(dblock->write_buf != dblock->blk)
         H5MM_xfree(dblock->write_buf);
@@ -2490,7 +2490,7 @@ H5HF__cache_dblock_serialize(const H5F_t H5_ATTR_NDEBUG_UNUSED *f, void *image,
  *
  *-------------------------------------------------------------------------
  */
-static herr_t 
+static herr_t
 H5HF__cache_dblock_notify(H5AC_notify_action_t action, void *_thing)
 {
     H5HF_direct_t 	*dblock = (H5HF_direct_t *)_thing;      /* Fractal heap direct block */
@@ -2560,7 +2560,7 @@ done:
  *
  *-------------------------------------------------------------------------
  */
-static herr_t 
+static herr_t
 H5HF__cache_dblock_free_icr(void *_thing)
 {
     H5HF_direct_t       *dblock = (H5HF_direct_t *)_thing;      /* Fractal heap direct block */
@@ -2597,7 +2597,7 @@ done:
  *
  *-------------------------------------------------------------------------
  */
-static herr_t 
+static herr_t
 H5HF__cache_dblock_fsf_size(const void *_thing, hsize_t *fsf_size)
 {
     const H5HF_direct_t *dblock = (const H5HF_direct_t *)_thing;      /* Fractal heap direct block */
@@ -2621,9 +2621,9 @@ H5HF__cache_dblock_fsf_size(const void *_thing, hsize_t *fsf_size)
 /*------------------------------------------------------------------------
  * Function:	H5HF__cache_verify_hdr_descendants_clean
  *
- * Purpose:	Sanity checking routine that verifies that all indirect 
- *		and direct blocks that are descendants of the supplied 
- *		instance of H5HF_hdr_t are clean.  Set *clean to 
+ * Purpose:	Sanity checking routine that verifies that all indirect
+ *		and direct blocks that are descendants of the supplied
+ *		instance of H5HF_hdr_t are clean.  Set *clean to
  *		TRUE if this is the case, and to FALSE otherwise.
  *
  *		Update -- 8/24/15
@@ -2636,41 +2636,41 @@ H5HF__cache_dblock_fsf_size(const void *_thing, hsize_t *fsf_size)
  *		remain dirty.
  *
  *		To address this, updated the sanity checks in this function
- *		to treat entries whose images are up to date as clean if 
+ *		to treat entries whose images are up to date as clean if
  *		a cache serialization is in progress.
  *
  *		Update -- 9/29/16
  *
  *		The implementation of flush dependencies has been changed.
- *		Prior to this change, a flush dependency parent could be 
+ *		Prior to this change, a flush dependency parent could be
  *		flushed if and only if all its flush dependency descendants
- *		were clean.  In the new definition, a flush dependency 
+ *		were clean.  In the new definition, a flush dependency
  *		parent can be flushed if all its immediate flush dependency
- *		children are clean, regardless of any other dirty 
- *		descendants.  
+ *		children are clean, regardless of any other dirty
+ *		descendants.
  *
- *		Further, metadata cache entries are now allowed to have 
- *		multiple flush dependency parents.  
+ *		Further, metadata cache entries are now allowed to have
+ *		multiple flush dependency parents.
  *
- *		This means that the fractal heap is no longer ncessarily 
+ *		This means that the fractal heap is no longer ncessarily
  *		flushed from the bottom up.
  *
- *		For example, it is now possible for a dirty fractal heap 
+ *		For example, it is now possible for a dirty fractal heap
  *		header to be flushed before a dirty dblock, as long as the
- *		there in an interviening iblock, and the header has no 
+ *		there in an interviening iblock, and the header has no
  *		dirty immediate flush dependency children.
  *
- *		Also, I gather that under some circumstances, a dblock 
- *		will be direct a flush dependency child both of the iblock 
+ *		Also, I gather that under some circumstances, a dblock
+ *		will be direct a flush dependency child both of the iblock
  *		that points to it, and of the fractal heap header.
  *
  *		As a result of these changes, the functionality of these
  *		sanity checking routines has been modified significantly.
  *		Instead of scanning the fractal heap from a starting point
- *		down, and verifying that there were no dirty entries, the 
- *		functions now scan downward from the starting point and 
- *		verify that there are no dirty flush dependency children 
- *		of the specified flush dependency parent.  In passing, 
+ *		down, and verifying that there were no dirty entries, the
+ *		functions now scan downward from the starting point and
+ *		verify that there are no dirty flush dependency children
+ *		of the specified flush dependency parent.  In passing,
  *		they also walk the data structure, and verify it.
  *
  *
@@ -2709,16 +2709,16 @@ H5HF__cache_verify_hdr_descendants_clean(H5F_t *f, H5HF_hdr_t *hdr,
 
     /* We have three basic scenarios we have to deal with:
      *
-     * The first, and most common case, is that there is a root iblock.  
-     * In this case we need to verify that the root iblock and all its 
+     * The first, and most common case, is that there is a root iblock.
+     * In this case we need to verify that the root iblock and all its
      * children are clean.
      *
-     * The second, and much less common case, is that in which the 
-     * the fractal heap contains only one direct block, which is 
-     * pointed to by hdr->man_dtable.table_addr.  In this case, all we 
+     * The second, and much less common case, is that in which the
+     * the fractal heap contains only one direct block, which is
+     * pointed to by hdr->man_dtable.table_addr.  In this case, all we
      * need to do is verify that the root direct block is clean.
      *
-     * Finally, it is possible that the fractal heap is empty, and 
+     * Finally, it is possible that the fractal heap is empty, and
      * has neither a root indirect block nor a root direct block.
      * In this case, we have nothing to do.
      */
@@ -2726,15 +2726,15 @@ H5HF__cache_verify_hdr_descendants_clean(H5F_t *f, H5HF_hdr_t *hdr,
     /* There are two ways in which we can arrive at the first scenario.
      *
      * By far the most common is when hdr->root_iblock contains a pointer
-     * to the root iblock -- in this case the root iblock is almost certainly 
+     * to the root iblock -- in this case the root iblock is almost certainly
      * pinned, although we can't count on that.
      *
-     * However, it is also possible that there is a root iblock that 
-     * is no longer pointed to by the header.  In this case, the on 
+     * However, it is also possible that there is a root iblock that
+     * is no longer pointed to by the header.  In this case, the on
      * disk address of the iblock will be in hdr->man_dtable.table_addr
      * and hdr->man_dtable.curr_root_rows will contain a positive value.
      *
-     * Since the former case is far and away the most common, we don't 
+     * Since the former case is far and away the most common, we don't
      * worry too much about efficiency in the second case.
      */
     if(hdr->root_iblock ||
@@ -2748,7 +2748,7 @@ H5HF__cache_verify_hdr_descendants_clean(H5F_t *f, H5HF_hdr_t *hdr,
         /* make note of the on disk address of the root iblock */
         if(root_iblock == NULL)
 	    /* hdr->man_dtable.table_addr must contain address of root
-             * iblock.  Check to see if it is in cache.  If it is, 
+             * iblock.  Check to see if it is in cache.  If it is,
              * protect it and put its address in root_iblock.
              */
 	    root_iblock_addr = hdr->man_dtable.table_addr;
@@ -2786,18 +2786,18 @@ H5HF__cache_verify_hdr_descendants_clean(H5F_t *f, H5HF_hdr_t *hdr,
 
             /* At this point, the root iblock may be pinned, protected,
              * both, or neither, and we may or may not have a pointer
-             * to root iblock in memory.  
+             * to root iblock in memory.
              *
              * Before we call H5HF__cache_verify_iblock_descendants_clean(),
-             * we must ensure that the root iblock is either pinned or 
-             * protected or both, and that we have a pointer to it.  
+             * we must ensure that the root iblock is either pinned or
+             * protected or both, and that we have a pointer to it.
              * Do this as follows:
              */
             if(root_iblock == NULL) {   /* we don't have ptr to root iblock */
                 if(0 == (root_iblock_status & H5AC_ES__IS_PROTECTED)) {
                     /* just protect the root iblock -- this will give us
-                     * the pointer we need to proceed, and ensure that 
-                     * it is locked into the metadata cache for the 
+                     * the pointer we need to proceed, and ensure that
+                     * it is locked into the metadata cache for the
                      * duration.
                      *
                      * Note that the udata is only used in the load callback.
@@ -2808,9 +2808,9 @@ H5HF__cache_verify_hdr_descendants_clean(H5F_t *f, H5HF_hdr_t *hdr,
                      * The tag specified in the API context we received
                      * as a parameter (via API context) may not be correct.
                      * Grab the (hopefully) correct tag from the header,
-                     * and load it into the API context via the H5_BEGIN_TAG and 
+                     * and load it into the API context via the H5_BEGIN_TAG and
                      * H5_END_TAG macros.  Note that any error bracked by
-                     * these macros must be reported with HGOTO_ERROR_TAG. 
+                     * these macros must be reported with HGOTO_ERROR_TAG.
                      */
                     H5_BEGIN_TAG(hdr->heap_addr)
 
@@ -2825,7 +2825,7 @@ H5HF__cache_verify_hdr_descendants_clean(H5F_t *f, H5HF_hdr_t *hdr,
                     /* the root iblock is protected, and we have no
                      * legitimate way of getting a pointer to it.
                      *
-                     * We square this circle by using the 
+                     * We square this circle by using the
                      * H5AC_get_entry_ptr_from_addr() to get the needed
                      * pointer.
                      *
@@ -2846,14 +2846,14 @@ H5HF__cache_verify_hdr_descendants_clean(H5F_t *f, H5HF_hdr_t *hdr,
                      * be unpinned is if none of its children are in cache.
                      * This unfortunately means that if it is protected and
                      * not pinned, the fractal heap is in the process of loading
-                     * or inserting one of its children.  The obvious 
-                     * implication is that there is a significant chance that 
+                     * or inserting one of its children.  The obvious
+                     * implication is that there is a significant chance that
                      * the root iblock is in an unstable state.
                      *
-                     * All this suggests that using 
-                     * H5AC_get_entry_ptr_from_addr() to obtain the pointer 
-                     * to the protected root iblock is questionable here.  
-                     * However, since this is test/debugging code, I expect 
+                     * All this suggests that using
+                     * H5AC_get_entry_ptr_from_addr() to obtain the pointer
+                     * to the protected root iblock is questionable here.
+                     * However, since this is test/debugging code, I expect
                      * that we will use this approach until it causes problems,
                      *  or we think of a better way.
                      */
@@ -2863,8 +2863,8 @@ H5HF__cache_verify_hdr_descendants_clean(H5F_t *f, H5HF_hdr_t *hdr,
                 } /* end else */
             } /* end if */
             else {      /* root_iblock != NULL */
-                /* we have the pointer to the root iblock.  Protect it 
-                 * if it is neither pinned nor protected -- otherwise we 
+                /* we have the pointer to the root iblock.  Protect it
+                 * if it is neither pinned nor protected -- otherwise we
                  * are ready to go.
                  */
                  H5HF_indirect_t *   iblock = NULL;
@@ -2882,9 +2882,9 @@ H5HF__cache_verify_hdr_descendants_clean(H5F_t *f, H5HF_hdr_t *hdr,
                      * The tag associated specified in the API context we received
                      * as a parameter (via API context) may not be correct.
                      * Grab the (hopefully) correct tag from the header,
-                     * and load it into the API context via the H5_BEGIN_TAG and 
+                     * and load it into the API context via the H5_BEGIN_TAG and
                      * H5_END_TAG macros.  Note that any error bracked by
-                     * these macros must be reported with HGOTO_ERROR_TAG. 
+                     * these macros must be reported with HGOTO_ERROR_TAG.
                      */
                     H5_BEGIN_TAG(hdr->heap_addr)
 
@@ -2953,8 +2953,8 @@ H5HF__cache_verify_hdr_descendants_clean(H5F_t *f, H5HF_hdr_t *hdr,
                 HGOTO_ERROR(H5E_HEAP, H5E_SYSTEM, FAIL, "root dblock in cache and is a flush dep parent.")
 
             *clean = !((root_dblock_status & H5AC_ES__IS_DIRTY) &&
-                       (((root_dblock_status & 
-                          H5AC_ES__IMAGE_IS_UP_TO_DATE) == 0) || 
+                       (((root_dblock_status &
+                          H5AC_ES__IMAGE_IS_UP_TO_DATE) == 0) ||
                         (!H5AC_get_serialization_in_progress(f))));
 
             *fd_clean = *clean;
@@ -2965,8 +2965,8 @@ H5HF__cache_verify_hdr_descendants_clean(H5F_t *f, H5HF_hdr_t *hdr,
         } /* end else */
     } /* end else-if */
     else {
-        /* this is scenario 3 -- the fractal heap is empty, and we 
-         * have nothing to do. 
+        /* this is scenario 3 -- the fractal heap is empty, and we
+         * have nothing to do.
          */
         *fd_clean = TRUE;
         *clean = TRUE;
@@ -2981,62 +2981,62 @@ done:
 /*------------------------------------------------------------------------
  * Function:	H5HF__cache_verify_iblock_descendants_clean
  *
- * Purpose:	Sanity checking routine that verifies that all indirect 
- *		and direct blocks that are descendants of the supplied 
- *		instance of H5HF_indirect_t are clean.  Set *clean 
+ * Purpose:	Sanity checking routine that verifies that all indirect
+ *		and direct blocks that are descendants of the supplied
+ *		instance of H5HF_indirect_t are clean.  Set *clean
  *		to TRUE if this is the case, and to FALSE otherwise.
  *
- *		In passing, the function also does a cursory check to 
- *		spot any obvious errors in the flush dependency setup.  
- *		If any problems are found, the function returns failure.  
- *		Note that these checks are not exhaustive, thus passing 
- *		them does not mean that the flush dependencies are 
+ *		In passing, the function also does a cursory check to
+ *		spot any obvious errors in the flush dependency setup.
+ *		If any problems are found, the function returns failure.
+ *		Note that these checks are not exhaustive, thus passing
+ *		them does not mean that the flush dependencies are
  *		correct -- only that there is nothing obviously wrong
  *		with them.
  *
- *		WARNING:  At its top level call, this function is 
- *		intended to be called from H5HF_cache_iblock_flush(), 
- *		and thus presumes that the supplied indirect block 
- *		is in cache.  Any other use of this function and 
- *		its descendants must insure that this assumption is 
+ *		WARNING:  At its top level call, this function is
+ *		intended to be called from H5HF_cache_iblock_flush(),
+ *		and thus presumes that the supplied indirect block
+ *		is in cache.  Any other use of this function and
+ *		its descendants must insure that this assumption is
  *		met.
  *
- *		Note that this function and 
- *		H5HF__cache_verify_descendant_iblocks_clean() are 
+ *		Note that this function and
+ *		H5HF__cache_verify_descendant_iblocks_clean() are
  *		recursive co-routines.
  *
  *		Update -- 9/29/16
  *
  *		The implementation of flush dependencies has been changed.
- *		Prior to this change, a flush dependency parent could be 
+ *		Prior to this change, a flush dependency parent could be
  *		flushed if and only if all its flush dependency descendants
- *		were clean.  In the new definition, a flush dependency 
+ *		were clean.  In the new definition, a flush dependency
  *		parent can be flushed if all its immediate flush dependency
- *		children are clean, regardless of any other dirty 
- *		descendants.  
+ *		children are clean, regardless of any other dirty
+ *		descendants.
  *
- *		Further, metadata cache entries are now allowed to have 
- *		multiple flush dependency parents.  
+ *		Further, metadata cache entries are now allowed to have
+ *		multiple flush dependency parents.
  *
- *		This means that the fractal heap is no longer ncessarily 
+ *		This means that the fractal heap is no longer ncessarily
  *		flushed from the bottom up.
  *
- *		For example, it is now possible for a dirty fractal heap 
+ *		For example, it is now possible for a dirty fractal heap
  *		header to be flushed before a dirty dblock, as long as the
- *		there in an interviening iblock, and the header has no 
+ *		there in an interviening iblock, and the header has no
  *		dirty immediate flush dependency children.
  *
- *		Also, I gather that under some circumstances, a dblock 
- *		will be direct a flush dependency child both of the iblock 
+ *		Also, I gather that under some circumstances, a dblock
+ *		will be direct a flush dependency child both of the iblock
  *		that points to it, and of the fractal heap header.
  *
  *		As a result of these changes, the functionality of these
  *		sanity checking routines has been modified significantly.
  *		Instead of scanning the fractal heap from a starting point
- *		down, and verifying that there were no dirty entries, the 
- *		functions now scan downward from the starting point and 
- *		verify that there are no dirty flush dependency children 
- *		of the specified flush dependency parent.  In passing, 
+ *		down, and verifying that there were no dirty entries, the
+ *		functions now scan downward from the starting point and
+ *		verify that there are no dirty flush dependency children
+ *		of the specified flush dependency parent.  In passing,
  *		they also walk the data structure, and verify it.
  *
  * Return:	Non-negative on success/Negative on failure
@@ -3096,17 +3096,17 @@ done:
  *		direct blocks pointed to by the supplied indirect block
  *		are either clean, or not in the cache.
  *
- *		In passing, the function also does a cursory check to 
- *		spot any obvious errors in the flush dependency setup.  
- *		If any problems are found, the function returns failure.  
- *		Note that these checks are not exhaustive, thus passing 
- *		them does not mean that the flush dependencies are 
+ *		In passing, the function also does a cursory check to
+ *		spot any obvious errors in the flush dependency setup.
+ *		If any problems are found, the function returns failure.
+ *		Note that these checks are not exhaustive, thus passing
+ *		them does not mean that the flush dependencies are
  *		correct -- only that there is nothing obviously wrong
  *		with them.
  *
- *		WARNING:  This function presumes that the supplied 
- *		iblock is in the cache, and will not be removed 
- *		during the call.  Caller must ensure that this is 
+ *		WARNING:  This function presumes that the supplied
+ *		iblock is in the cache, and will not be removed
+ *		during the call.  Caller must ensure that this is
  *		the case before the call.
  *
  *      Update -- 8/24/15
@@ -3125,35 +3125,35 @@ done:
  *		Update -- 9/29/16
  *
  *		The implementation of flush dependencies has been changed.
- *		Prior to this change, a flush dependency parent could be 
+ *		Prior to this change, a flush dependency parent could be
  *		flushed if and only if all its flush dependency descendants
- *		were clean.  In the new definition, a flush dependency 
+ *		were clean.  In the new definition, a flush dependency
  *		parent can be flushed if all its immediate flush dependency
- *		children are clean, regardless of any other dirty 
- *		descendants.  
+ *		children are clean, regardless of any other dirty
+ *		descendants.
  *
- *		Further, metadata cache entries are now allowed to have 
- *		multiple flush dependency parents.  
+ *		Further, metadata cache entries are now allowed to have
+ *		multiple flush dependency parents.
  *
- *		This means that the fractal heap is no longer ncessarily 
+ *		This means that the fractal heap is no longer ncessarily
  *		flushed from the bottom up.
  *
- *		For example, it is now possible for a dirty fractal heap 
+ *		For example, it is now possible for a dirty fractal heap
  *		header to be flushed before a dirty dblock, as long as the
- *		there in an interviening iblock, and the header has no 
+ *		there in an interviening iblock, and the header has no
  *		dirty immediate flush dependency children.
  *
- *		Also, I gather that under some circumstances, a dblock 
- *		will be direct a flush dependency child both of the iblock 
+ *		Also, I gather that under some circumstances, a dblock
+ *		will be direct a flush dependency child both of the iblock
  *		that points to it, and of the fractal heap header.
  *
  *		As a result of these changes, the functionality of these
  *		sanity checking routines has been modified significantly.
  *		Instead of scanning the fractal heap from a starting point
- *		down, and verifying that there were no dirty entries, the 
- *		functions now scan downward from the starting point and 
- *		verify that there are no dirty flush dependency children 
- *		of the specified flush dependency parent.  In passing, 
+ *		down, and verifying that there were no dirty entries, the
+ *		functions now scan downward from the starting point and
+ *		verify that there are no dirty flush dependency children
+ *		of the specified flush dependency parent.  In passing,
  *		they also walk the data structure, and verify it.
  *
  * Return:	Non-negative on success/Negative on failure
@@ -3165,8 +3165,8 @@ done:
  */
 #ifndef NDEBUG
 static herr_t
-H5HF__cache_verify_iblocks_dblocks_clean(H5F_t *f, haddr_t fd_parent_addr, 
-    H5HF_indirect_t *iblock, hbool_t *fd_clean, hbool_t *clean, 
+H5HF__cache_verify_iblocks_dblocks_clean(H5F_t *f, haddr_t fd_parent_addr,
+    H5HF_indirect_t *iblock, hbool_t *fd_clean, hbool_t *clean,
     hbool_t *has_dblocks)
 {
     unsigned	num_direct_rows;
@@ -3224,16 +3224,16 @@ H5HF__cache_verify_iblocks_dblocks_clean(H5F_t *f, haddr_t fd_parent_addr,
                         (((dblock_status & H5AC_ES__IMAGE_IS_UP_TO_DATE) == 0) ||
                         (!H5AC_get_serialization_in_progress(f)))) {
                     *clean = FALSE;
-		    
+
                     if(H5AC_flush_dependency_exists(f, fd_parent_addr, dblock_addr, &fd_exists) < 0)
                         HGOTO_ERROR(H5E_HEAP, H5E_CANTGET, FAIL, "can't check flush dependency")
 
-                    if(fd_exists) 
+                    if(fd_exists)
                         *fd_clean = FALSE;
                 } /* end if */
 
-                /* If a child dblock is in cache, it must have a flush 
-                 * dependency relationship with this iblock.  Test this 
+                /* If a child dblock is in cache, it must have a flush
+                 * dependency relationship with this iblock.  Test this
                  * here.
                  */
                  if(H5AC_flush_dependency_exists(f, iblock_addr, dblock_addr, &fd_exists) < 0)
@@ -3246,7 +3246,7 @@ H5HF__cache_verify_iblocks_dblocks_clean(H5F_t *f, haddr_t fd_parent_addr,
 
         i++;
     } /* end while */
-    
+
 done:
     FUNC_LEAVE_NOAPI(ret_value)
 } /* H5HF__cache_verify_iblocks_dblocks_clean() */
@@ -3260,17 +3260,17 @@ done:
  *		direct blocks pointed to by the supplied indirect block
  *		are either clean, or not in the cache.
  *
- *		In passing, the function also does a cursory check to 
- *		spot any obvious errors in the flush dependency setup.  
- *		If any problems are found, the function returns failure.  
- *		Note that these checks are not exhaustive, thus passing 
- *		them does not mean that the flush dependencies are 
+ *		In passing, the function also does a cursory check to
+ *		spot any obvious errors in the flush dependency setup.
+ *		If any problems are found, the function returns failure.
+ *		Note that these checks are not exhaustive, thus passing
+ *		them does not mean that the flush dependencies are
  *		correct -- only that there is nothing obviously wrong
  *		with them.
  *
- *		WARNING:  This function presumes that the supplied 
- *		iblock is in the cache, and will not be removed 
- *		during the call.  Caller must ensure that this is 
+ *		WARNING:  This function presumes that the supplied
+ *		iblock is in the cache, and will not be removed
+ *		during the call.  Caller must ensure that this is
  *		the case before the call.
  *
  *              Update -- 8/24/15
@@ -3289,35 +3289,35 @@ done:
  *		Update -- 9/29/16
  *
  *		The implementation of flush dependencies has been changed.
- *		Prior to this change, a flush dependency parent could be 
+ *		Prior to this change, a flush dependency parent could be
  *		flushed if and only if all its flush dependency descendants
- *		were clean.  In the new definition, a flush dependency 
+ *		were clean.  In the new definition, a flush dependency
  *		parent can be flushed if all its immediate flush dependency
- *		children are clean, regardless of any other dirty 
- *		descendants.  
+ *		children are clean, regardless of any other dirty
+ *		descendants.
  *
- *		Further, metadata cache entries are now allowed to have 
+ *		Further, metadata cache entries are now allowed to have
  *		multiple flush dependency parents.
  *
- *		This means that the fractal heap is no longer ncessarily 
+ *		This means that the fractal heap is no longer ncessarily
  *		flushed from the bottom up.
  *
- *		For example, it is now possible for a dirty fractal heap 
+ *		For example, it is now possible for a dirty fractal heap
  *		header to be flushed before a dirty dblock, as long as the
- *		there in an interviening iblock, and the header has no 
+ *		there in an interviening iblock, and the header has no
  *		dirty immediate flush dependency children.
  *
- *		Also, I gather that under some circumstances, a dblock 
- *		will be direct a flush dependency child both of the iblock 
+ *		Also, I gather that under some circumstances, a dblock
+ *		will be direct a flush dependency child both of the iblock
  *		that points to it, and of the fractal heap header.
  *
  *		As a result of these changes, the functionality of these
  *		sanity checking routines has been modified significantly.
  *		Instead of scanning the fractal heap from a starting point
- *		down, and verifying that there were no dirty entries, the 
- *		functions now scan downward from the starting point and 
- *		verify that there are no dirty flush dependency children 
- *		of the specified flush dependency parent.  In passing, 
+ *		down, and verifying that there were no dirty entries, the
+ *		functions now scan downward from the starting point and
+ *		verify that there are no dirty flush dependency children
+ *		of the specified flush dependency parent.  In passing,
  *		they also walk the data structure, and verify it.
  *
  *
@@ -3388,54 +3388,54 @@ H5HF__cache_verify_descendant_iblocks_clean(H5F_t *f, haddr_t fd_parent_addr,
                         *fd_clean = FALSE;
                 } /* end if */
 
-                /* if the child iblock is in cache and *fd_clean is TRUE, 
+                /* if the child iblock is in cache and *fd_clean is TRUE,
                  * we must continue to explore down the fractal heap tree
-                 * structure to verify that all descendant blocks that are 
-                 * flush dependency children of the entry at parent_addr are 
-                 * either clean, or not in the metadata cache.  We do this 
-                 * with a recursive call to 
+                 * structure to verify that all descendant blocks that are
+                 * flush dependency children of the entry at parent_addr are
+                 * either clean, or not in the metadata cache.  We do this
+                 * with a recursive call to
                  * H5HF__cache_verify_iblock_descendants_clean().
                  * However, we can't make this call unless the child iblock
-                 * is somehow locked into the cache -- typically via either 
+                 * is somehow locked into the cache -- typically via either
                  * pinning or protecting.
                  *
                  * If the child iblock is pinned, we can look up its pointer
-                 * on the current iblock's pinned child iblock list, and 
+                 * on the current iblock's pinned child iblock list, and
                  * and use that pointer in the recursive call.
                  *
                  * If the entry is unprotected and unpinned, we simply
                  * protect it.
                  *
-                 * If, however, the the child iblock is already protected, 
-                 * but not pinned, we have a bit of a problem, as we have 
+                 * If, however, the the child iblock is already protected,
+                 * but not pinned, we have a bit of a problem, as we have
                  * no legitimate way of looking up its pointer in memory.
                  *
                  * To solve this problem, I have added a new metadata cache
-                 * call to obtain the pointer.  
+                 * call to obtain the pointer.
                  *
-                 * WARNING: This call should be used only in debugging 
-                 * 	    routines, and it should be avoided there when 
-                 *	    possible.  
+                 * WARNING: This call should be used only in debugging
+                 * 	    routines, and it should be avoided there when
+                 *	    possible.
                  *
-                 *          Further, if we ever multi-thread the cache, 
-                 *	    this routine will have to be either discarded 
+                 *          Further, if we ever multi-thread the cache,
+                 *	    this routine will have to be either discarded
                  *	    or heavily re-worked.
                  *
-                 *	    Finally, keep in mind that the entry whose 
-                 *	    pointer is obtained in this fashion may not 
-                 *          be in a stable state.  
+                 *	    Finally, keep in mind that the entry whose
+                 *	    pointer is obtained in this fashion may not
+                 *          be in a stable state.
                  *
-                 * Assuming that the flush dependency code is working 
-                 * as it should, the only reason for the child entry to 
+                 * Assuming that the flush dependency code is working
+                 * as it should, the only reason for the child entry to
                  * be unpinned is if none of its children are in cache.
-                 * This unfortunately means that if it is protected and 
+                 * This unfortunately means that if it is protected and
                  * not pinned, the fractal heap is in the process of loading
                  * or inserting one of its children.  The obvious implication
-                 * is that there is a significant chance that the child 
+                 * is that there is a significant chance that the child
                  * iblock is in an unstable state.
                  *
-                 * All this suggests that using the new call to obtain the 
-                 * pointer to the protected child iblock is questionable 
+                 * All this suggests that using the new call to obtain the
+                 * pointer to the protected child iblock is questionable
                  * here.  However, since this is test/debugging code, I
                  * expect that we will use this approach until it causes
                  * problems, or we think of a better way.
@@ -3491,8 +3491,8 @@ H5HF__cache_verify_descendant_iblocks_clean(H5F_t *f, haddr_t fd_parent_addr,
                         child_iblock = iblock->child_iblocks[i - first_iblock_index];
                     } /* end else */
 
-                    /* At this point, one way or another we should have 
-                     * a pointer to the child iblock.  Verify that we 
+                    /* At this point, one way or another we should have
+                     * a pointer to the child iblock.  Verify that we
                      * that we have the correct one.
                      */
                     HDassert(child_iblock);
@@ -3504,8 +3504,8 @@ H5HF__cache_verify_descendant_iblocks_clean(H5F_t *f, haddr_t fd_parent_addr,
                     if(H5HF__cache_verify_iblock_descendants_clean(f, fd_parent_addr, child_iblock, &child_iblock_status, fd_clean, clean) < 0)
                         HGOTO_ERROR(H5E_HEAP, H5E_SYSTEM, FAIL, "can't verify child iblock clean.")
 
-                    /* if iblock_addr != fd_parent_addr, verify that a flush 
-                     * dependency relationship exists between iblock and 
+                    /* if iblock_addr != fd_parent_addr, verify that a flush
+                     * dependency relationship exists between iblock and
                      * the child iblock.
                      */
                     if(fd_parent_addr != iblock_addr) {
diff --git a/src/H5HFiblock.c b/src/H5HFiblock.c
index 20a62b7..07eb9cd 100644
--- a/src/H5HFiblock.c
+++ b/src/H5HFiblock.c
@@ -1805,7 +1805,7 @@ H5HF__man_iblock_parent_info(const H5HF_hdr_t *hdr, hsize_t block_off,
     /* Sanity check - first lookup must be an indirect block */
     HDassert(row >= hdr->man_dtable.max_direct_rows);
 
-    /* Traverse down, until a direct block at the offset is found, then 
+    /* Traverse down, until a direct block at the offset is found, then
      *	use previous (i.e. parent's) offset, row, and column.
      */
     prev_par_block_off = par_block_off = 0;
diff --git a/src/H5HFman.c b/src/H5HFman.c
index e5b5cb8..ea00546 100644
--- a/src/H5HFman.c
+++ b/src/H5HFman.c
@@ -238,7 +238,7 @@ H5HF_man_get_obj_len(H5HF_hdr_t *hdr, const uint8_t *id, size_t *obj_len_p)
     HDassert(hdr);
     HDassert(id);
     HDassert(obj_len_p);
-    
+
     /* Skip over the flag byte */
     id++;
 
@@ -276,7 +276,7 @@ H5HF__man_get_obj_off(const H5HF_hdr_t *hdr, const uint8_t *id, hsize_t *obj_off
     HDassert(hdr);
     HDassert(id);
     HDassert(obj_off_p);
-    
+
     /* Skip over the flag byte */
     id++;
 
@@ -307,8 +307,8 @@ H5HF__man_op_real(H5HF_hdr_t *hdr, const uint8_t *id,
 {
     H5HF_direct_t *dblock = NULL;       /* Pointer to direct block to query */
     unsigned dblock_access_flags;       /* Access method for direct block */
-                                        /* must equal either 
-                                         * H5AC__NO_FLAGS_SET or 
+                                        /* must equal either
+                                         * H5AC__NO_FLAGS_SET or
                                          * H5AC__READ_ONLY_FLAG
                                          */
     haddr_t dblock_addr;                /* Direct block address */
diff --git a/src/H5HFpkg.h b/src/H5HFpkg.h
index b38a897..83e46fc 100644
--- a/src/H5HFpkg.h
+++ b/src/H5HFpkg.h
@@ -646,9 +646,9 @@ H5_DLL herr_t H5HF_hdr_dest(H5HF_hdr_t *hdr);
 H5_DLL herr_t H5HF_iblock_incr(H5HF_indirect_t *iblock);
 H5_DLL herr_t H5HF__iblock_decr(H5HF_indirect_t *iblock);
 H5_DLL herr_t H5HF_iblock_dirty(H5HF_indirect_t *iblock);
-H5_DLL herr_t H5HF__man_iblock_root_create(H5HF_hdr_t *hdr, 
+H5_DLL herr_t H5HF__man_iblock_root_create(H5HF_hdr_t *hdr,
     size_t min_dblock_size);
-H5_DLL herr_t H5HF__man_iblock_root_double(H5HF_hdr_t *hdr, 
+H5_DLL herr_t H5HF__man_iblock_root_double(H5HF_hdr_t *hdr,
     size_t min_dblock_size);
 H5_DLL herr_t H5HF__man_iblock_alloc_row(H5HF_hdr_t *hdr,
     H5HF_free_section_t **sec_node);
@@ -779,13 +779,13 @@ H5_DLL herr_t H5HF__space_add(H5HF_hdr_t *hdr, H5HF_free_section_t *node,
 H5_DLL htri_t H5HF__space_find(H5HF_hdr_t *hdr, hsize_t request,
     H5HF_free_section_t **node);
 H5_DLL herr_t H5HF__space_revert_root(const H5HF_hdr_t *hdr);
-H5_DLL herr_t H5HF__space_create_root(const H5HF_hdr_t *hdr, 
+H5_DLL herr_t H5HF__space_create_root(const H5HF_hdr_t *hdr,
     H5HF_indirect_t *root_iblock);
 H5_DLL herr_t H5HF__space_size(H5HF_hdr_t *hdr, hsize_t *fs_size);
 H5_DLL herr_t H5HF__space_remove(H5HF_hdr_t *hdr, H5HF_free_section_t *node);
 H5_DLL herr_t H5HF__space_close(H5HF_hdr_t *hdr);
 H5_DLL herr_t H5HF__space_delete(H5HF_hdr_t *hdr);
-H5_DLL herr_t H5HF__space_sect_change_class(H5HF_hdr_t *hdr, 
+H5_DLL herr_t H5HF__space_sect_change_class(H5HF_hdr_t *hdr,
     H5HF_free_section_t *sect, uint16_t new_class);
 
 /* Free space section routines */
diff --git a/src/H5HFsection.c b/src/H5HFsection.c
index c11bc34..a0f984b 100644
--- a/src/H5HFsection.c
+++ b/src/H5HFsection.c
@@ -156,7 +156,7 @@ static hbool_t H5HF_sect_indirect_is_first(H5HF_free_section_t *sect);
 static H5HF_indirect_t * H5HF_sect_indirect_get_iblock(H5HF_free_section_t *sect);
 static hsize_t H5HF_sect_indirect_iblock_off(const H5HF_free_section_t *sect);
 static H5HF_free_section_t * H5HF_sect_indirect_top(H5HF_free_section_t *sect);
-static herr_t H5HF__sect_indirect_merge_row(H5HF_hdr_t *hdr, 
+static herr_t H5HF__sect_indirect_merge_row(H5HF_hdr_t *hdr,
     H5HF_free_section_t *sect1, H5HF_free_section_t *sect2);
 static herr_t H5HF__sect_indirect_build_parent(H5HF_hdr_t *hdr, H5HF_free_section_t *sect);
 static herr_t H5HF__sect_indirect_shrink(H5HF_hdr_t *hdr,
diff --git a/src/H5HFtiny.c b/src/H5HFtiny.c
index 0c27180..113124c 100644
--- a/src/H5HFtiny.c
+++ b/src/H5HFtiny.c
@@ -264,11 +264,11 @@ H5HF_tiny_op_real(H5HF_hdr_t *hdr, const uint8_t *id, H5HF_operator_t op,
     HDassert(hdr);
     HDassert(id);
     HDassert(op);
-    
+
     /* Get the object's encoded length */
     /* H5HF_tiny_obj_len can't fail */
     ret_value = H5HF_tiny_get_obj_len(hdr, id, &enc_obj_size);
-    
+
     /* Advance past flag byte(s) */
     if(!hdr->tiny_len_extended)
         id++;
diff --git a/src/H5HG.c b/src/H5HG.c
index 2d05a2c..f9d780c 100644
--- a/src/H5HG.c
+++ b/src/H5HG.c
@@ -785,14 +785,14 @@ H5HG_remove (H5F_t *f, H5HG_t *hobj)
         HGOTO_ERROR(H5E_HEAP, H5E_CANTPROTECT, FAIL, "unable to protect global heap")
 
     HDassert(hobj->idx < heap->nused);
-    
+
     /* When the application selects the same location to rewrite the VL element by using H5Sselect_elements,
      * it can happen that the entry has been removed by first rewrite.  Here we simply skip the removal of
      * the entry and let the second rewrite happen (see HDFFV-10635).  In the future, it'd be nice to handle
      * this situation in H5T_conv_vlen in H5Tconv.c instead of this level (HDFFV-10648). */
     if(heap->obj[hobj->idx].nrefs == 0 && heap->obj[hobj->idx].size == 0 && !heap->obj[hobj->idx].begin)
         HGOTO_DONE(ret_value)
-        
+
     obj_start = heap->obj[hobj->idx].begin;
     /* Include object header size */
     need = H5HG_ALIGN(heap->obj[hobj->idx].size) + H5HG_SIZEOF_OBJHDR(f);
diff --git a/src/H5HGcache.c b/src/H5HGcache.c
index 18625cc..7485aad 100644
--- a/src/H5HGcache.c
+++ b/src/H5HGcache.c
@@ -64,10 +64,10 @@ static herr_t H5HG__cache_heap_get_initial_load_size(void *udata, size_t *image_
 static herr_t H5HG__cache_heap_get_final_load_size(const void *_image,
     size_t image_len, void *udata, size_t *actual_len);
 static void *H5HG__cache_heap_deserialize(const void *image, size_t len,
-    void *udata, hbool_t *dirty); 
+    void *udata, hbool_t *dirty);
 static herr_t H5HG__cache_heap_image_len(const void *thing, size_t *image_len);
 static herr_t H5HG__cache_heap_serialize(const H5F_t *f, void *image,
-    size_t len, void *thing); 
+    size_t len, void *thing);
 static herr_t H5HG__cache_heap_free_icr(void *thing);
 
 /* Prefix deserialization */
@@ -158,10 +158,10 @@ done:
 /*-------------------------------------------------------------------------
  * Function:    H5HG__cache_heap_get_initial_load_size()
  *
- * Purpose:	Return the initial speculative read size to the metadata 
- *		cache.  This size will be used in the initial attempt to read 
- *		the global heap.  If this read is too small, the cache will 
- *		try again with the correct value obtained from 
+ * Purpose:	Return the initial speculative read size to the metadata
+ *		cache.  This size will be used in the initial attempt to read
+ *		the global heap.  If this read is too small, the cache will
+ *		try again with the correct value obtained from
  *		H5HG__cache_get_final_load_size().
  *
  * Return:      Success:        SUCCEED
@@ -232,7 +232,7 @@ done:
 /*-------------------------------------------------------------------------
  * Function:    H5HG__cache_heap_deserialize
  *
- * Purpose:	Given a buffer containing the on disk image of the global 
+ * Purpose:	Given a buffer containing the on disk image of the global
  *		heap, deserialize it, load its contents into a newly allocated
  *		instance of H5HG_heap_t, and return a pointer to the new instance.
  *
@@ -334,11 +334,11 @@ H5HG__cache_heap_deserialize(const void *_image, size_t len, void *_udata,
             heap->obj[idx].begin = begin;
 
             /*
-             * The total storage size includes the size of the object 
-             * header and is zero padded so the next object header is 
-             * properly aligned. The entire obj array was calloc'ed, 
-             * so no need to zero the space here. The last bit of space 
-             * is the free space object whose size is never padded and 
+             * The total storage size includes the size of the object
+             * header and is zero padded so the next object header is
+             * properly aligned. The entire obj array was calloc'ed,
+             * so no need to zero the space here. The last bit of space
+             * is the free space object whose size is never padded and
              * already includes the object header.
              */
             if(idx > 0) {
@@ -384,7 +384,7 @@ done:
 /*-------------------------------------------------------------------------
  * Function:    H5HG__cache_heap_image_len
  *
- * Purpose:	Return the on disk image size of the global heap to the 
+ * Purpose:	Return the on disk image size of the global heap to the
  *		metadata cache via the image_len.
  *
  * Return:      Success:        SUCCEED
@@ -418,7 +418,7 @@ H5HG__cache_heap_image_len(const void *_thing, size_t *image_len)
 /*-------------------------------------------------------------------------
  * Function:    H5HG__cache_heap_serialize
  *
- * Purpose:	Given an appropriately sized buffer and an instance of 
+ * Purpose:	Given an appropriately sized buffer and an instance of
  *		H5HG_heap_t, serialize the global heap for writing to file,
  *		and copy the serialized version into the buffer.
  *
diff --git a/src/H5HLcache.c b/src/H5HLcache.c
index b0ac05f..cff3942 100644
--- a/src/H5HLcache.c
+++ b/src/H5HLcache.c
@@ -77,16 +77,16 @@ static void *H5HL__cache_prefix_deserialize(const void *image, size_t len,
     void *udata, hbool_t *dirty);
 static herr_t H5HL__cache_prefix_image_len(const void *thing, size_t *image_len);
 static herr_t H5HL__cache_prefix_serialize(const H5F_t *f, void *image,
-    size_t len, void *thing); 
+    size_t len, void *thing);
 static herr_t H5HL__cache_prefix_free_icr(void *thing);
 
 /* Local heap data block */
 static herr_t H5HL__cache_datablock_get_initial_load_size(void *udata, size_t *image_len);
 static void *H5HL__cache_datablock_deserialize(const void *image, size_t len,
-    void *udata, hbool_t *dirty); 
+    void *udata, hbool_t *dirty);
 static herr_t H5HL__cache_datablock_image_len(const void *thing, size_t *image_len);
 static herr_t H5HL__cache_datablock_serialize(const H5F_t *f, void *image,
-    size_t len, void *thing); 
+    size_t len, void *thing);
 static herr_t H5HL__cache_datablock_notify(H5C_notify_action_t action, void *_thing);
 static herr_t H5HL__cache_datablock_free_icr(void *thing);
 
@@ -176,12 +176,12 @@ H5HL__hdr_deserialize( H5HL_t *heap, const uint8_t *image,
     HDassert(udata);
 
     /* Check magic number */
-    if(HDmemcmp(image, H5HL_MAGIC, (size_t)H5_SIZEOF_MAGIC)) 
+    if(HDmemcmp(image, H5HL_MAGIC, (size_t)H5_SIZEOF_MAGIC))
         HGOTO_ERROR(H5E_HEAP, H5E_BADVALUE, FAIL, "bad local heap signature")
     image += H5_SIZEOF_MAGIC;
 
     /* Version */
-    if(H5HL_VERSION != *image++) 
+    if(H5HL_VERSION != *image++)
         HGOTO_ERROR(H5E_HEAP, H5E_VERSION, FAIL, "wrong version number in local heap")
 
     /* Reserved */
@@ -323,7 +323,7 @@ H5HL__fl_serialize(const H5HL_t *heap)
 /*-------------------------------------------------------------------------
  * Function:    H5HL__cache_prefix_get_initial_load_size()
  *
- * Purpose:	Return the initial size of the buffer the metadata cache should 
+ * Purpose:	Return the initial size of the buffer the metadata cache should
  *		load from file and pass to the deserialize routine.
  *
  * Return:      Success:        SUCCEED
@@ -352,7 +352,7 @@ H5HL__cache_prefix_get_initial_load_size(void H5_ATTR_UNUSED *_udata, size_t *im
 /*-------------------------------------------------------------------------
  * Function:    H5HL__cache_prefix_get_final_load_size()
  *
- * Purpose:	Return the final size of the buffer the metadata cache should 
+ * Purpose:	Return the final size of the buffer the metadata cache should
  *		load from file and pass to the deserialize routine.
  *
  * Return:      Success:        SUCCEED
@@ -402,7 +402,7 @@ done:
 /*-------------------------------------------------------------------------
  * Function:    H5HL__cache_prefix_deserialize
  *
- * Purpose:	Given a buffer containing the on disk image of the local 
+ * Purpose:	Given a buffer containing the on disk image of the local
  *		heap prefix, deserialize it, load its contents into a newly allocated
  *		instance of H5HL_prfx_t, and return a pointer to the new instance.
  *
@@ -415,7 +415,7 @@ done:
  *-------------------------------------------------------------------------
  */
 static void *
-H5HL__cache_prefix_deserialize(const void *_image, size_t H5_ATTR_NDEBUG_UNUSED len, 
+H5HL__cache_prefix_deserialize(const void *_image, size_t H5_ATTR_NDEBUG_UNUSED len,
     void *_udata, hbool_t H5_ATTR_UNUSED *dirty)
 {
     H5HL_t               *heap = NULL;  /* Local heap */
@@ -472,8 +472,8 @@ H5HL__cache_prefix_deserialize(const void *_image, size_t H5_ATTR_NDEBUG_UNUSED
                 HGOTO_ERROR(H5E_HEAP, H5E_CANTINIT, NULL, "can't initialize free list")
         } /* end if */
         else
-            /* Note that the heap should _NOT_ be a single 
-             * object in the cache 
+            /* Note that the heap should _NOT_ be a single
+             * object in the cache
              */
             heap->single_cache_obj = FALSE;
     } /* end if */
@@ -501,7 +501,7 @@ done:
 /*-------------------------------------------------------------------------
  * Function:    H5HL__cache_prefix_image_len
  *
- * Purpose:	Return the on disk image size of a local heap prefix to the 
+ * Purpose:	Return the on disk image size of a local heap prefix to the
  *		metadata cache via the image_len.
  *
  * Return:      Success:        SUCCEED
@@ -528,8 +528,8 @@ H5HL__cache_prefix_image_len(const void *_thing, size_t *image_len)
     /* Set the prefix's size */
     *image_len = prfx->heap->prfx_size;
 
-    /* If the heap is stored as a single object, add in the 
-     * data block size also 
+    /* If the heap is stored as a single object, add in the
+     * data block size also
      */
     if(prfx->heap->single_cache_obj)
         *image_len += prfx->heap->dblk_size;
@@ -541,9 +541,9 @@ H5HL__cache_prefix_image_len(const void *_thing, size_t *image_len)
 /*-------------------------------------------------------------------------
  * Function:    H5HL__cache_prefix_serialize
  *
- * Purpose:	Given a pointer to an instance of H5HL_prfx_t and an 
- *		appropriately sized buffer, serialize the contents of the 
- *		instance for writing to disk, and copy the serialized data 
+ * Purpose:	Given a pointer to an instance of H5HL_prfx_t and an
+ *		appropriately sized buffer, serialize the contents of the
+ *		instance for writing to disk, and copy the serialized data
  *		into the buffer.
  *
  * Return:      Success:        SUCCEED
@@ -603,9 +603,9 @@ H5HL__cache_prefix_serialize(const H5_ATTR_NDEBUG_UNUSED H5F_t *f, void *_image,
         if((size_t)(image - (uint8_t *)_image) < heap->prfx_size) {
             size_t gap;         /* Size of gap between prefix and data block */
 
-            /* Set image to the start of the data block.  This is necessary 
-             * because there may be a gap between the used portion of 
-             * the prefix and the data block due to alignment constraints. 
+            /* Set image to the start of the data block.  This is necessary
+             * because there may be a gap between the used portion of
+             * the prefix and the data block due to alignment constraints.
              */
             gap = heap->prfx_size - (size_t)(image - (uint8_t *)_image);
             HDmemset(image, 0, gap);
@@ -636,11 +636,11 @@ H5HL__cache_prefix_serialize(const H5_ATTR_NDEBUG_UNUSED H5F_t *f, void *_image,
 /*-------------------------------------------------------------------------
  * Function:    H5HL__cache_prefix_free_icr
  *
- * Purpose:	Free the supplied in core representation of a local heap 
+ * Purpose:	Free the supplied in core representation of a local heap
  *		prefix.
  *
- *		Note that this function handles the partially initialize prefix 
- *		from a failed speculative load attempt.  See comments below for 
+ *		Note that this function handles the partially initialize prefix
+ *		from a failed speculative load attempt.  See comments below for
  *		details.
  *
  * Note:	The metadata cache sets the object's cache_info.magic to
@@ -681,7 +681,7 @@ done:
 /*-------------------------------------------------------------------------
  * Function:    H5HL__cache_datablock_get_initial_load_size()
  *
- * Purpose:	Tell the metadata cache how large a buffer to read from 
+ * Purpose:	Tell the metadata cache how large a buffer to read from
  *		file when loading a datablock.  In this case, we simply lookup
  *		the correct value in the user data, and return it in *image_len.
  *
@@ -715,7 +715,7 @@ H5HL__cache_datablock_get_initial_load_size(void *_udata, size_t *image_len)
 /*-------------------------------------------------------------------------
  * Function:    H5HL__cache_datablock_deserialize
  *
- * Purpose:	Given a buffer containing the on disk image of a local 
+ * Purpose:	Given a buffer containing the on disk image of a local
  *		heap data block, deserialize it, load its contents into a newly allocated
  *		instance of H5HL_dblk_t, and return a pointer to the new instance.
  *
@@ -826,7 +826,7 @@ H5HL__cache_datablock_image_len(const void *_thing, size_t *image_len)
  *-------------------------------------------------------------------------
  */
 static herr_t
-H5HL__cache_datablock_serialize(const H5F_t H5_ATTR_NDEBUG_UNUSED *f, void *image, 
+H5HL__cache_datablock_serialize(const H5F_t H5_ATTR_NDEBUG_UNUSED *f, void *image,
     size_t H5_ATTR_NDEBUG_UNUSED len, void *_thing)
 {
     H5HL_t      *heap;          /* Pointer to the local heap */
@@ -872,7 +872,7 @@ H5HL__cache_datablock_serialize(const H5F_t H5_ATTR_NDEBUG_UNUSED *f, void *imag
  *
  *-------------------------------------------------------------------------
  */
-static herr_t 
+static herr_t
 H5HL__cache_datablock_notify(H5C_notify_action_t action, void *_thing)
 {
     H5HL_dblk_t *dblk = (H5HL_dblk_t *)_thing;  /* Pointer to the local heap data block */
diff --git a/src/H5HLdblk.c b/src/H5HLdblk.c
index 762a213..c3fcffe 100644
--- a/src/H5HLdblk.c
+++ b/src/H5HLdblk.c
@@ -242,7 +242,7 @@ H5HL__dblk_realloc(H5F_t *f, H5HL_t *heap, size_t new_heap_size))
             /* Insert data block into cache (pinned) */
             if(FAIL == H5AC_insert_entry(f, H5AC_LHEAP_DBLK, new_addr, dblk, H5AC__PIN_ENTRY_FLAG))
                 H5E_THROW(H5E_CANTINIT, "unable to cache local heap data block");
-                
+
             dblk = NULL;
 
             /* Reset 'single cache object' flag */
diff --git a/src/H5HLint.c b/src/H5HLint.c
index e625f3d..cc3e3ea 100644
--- a/src/H5HLint.c
+++ b/src/H5HLint.c
@@ -213,7 +213,7 @@ CATCH
         if(NULL != (fl = H5FL_FREE(H5HL_free_t, fl)))
             H5E_THROW(H5E_CANTFREE, "unable to free local heap free list");
     } /* end while */
-    
+
     if(NULL != (heap = H5FL_FREE(H5HL_t, heap)))
         H5E_THROW(H5E_CANTFREE, "unable to free local heap");
 
diff --git a/src/H5I.c b/src/H5I.c
index b233d23..2ef3601 100644
--- a/src/H5I.c
+++ b/src/H5I.c
@@ -820,7 +820,7 @@ done:
  *
  * Purpose:     Registers an OBJECT in a TYPE with the supplied ID for it.
  *              This routine will check to ensure the supplied ID is not already
- *              in use, and ensure that it is a valid ID for the given type, 
+ *              in use, and ensure that it is a valid ID for the given type,
  *              but will NOT check to ensure the OBJECT is not already
  *              registered (thus, it is possible to register one object under
  *              multiple IDs).
@@ -1361,10 +1361,10 @@ H5I_dec_ref(hid_t id)
      * reference count without calling the free method.
      *
      * Beware: the free method may call other H5I functions.
-     * 
-     * If an object is closing, we can remove the ID even though the free 
+     *
+     * If an object is closing, we can remove the ID even though the free
      * method might fail.  This can happen when a mandatory filter fails to
-     * write when a dataset is closed and the chunk cache is flushed to the 
+     * write when a dataset is closed and the chunk cache is flushed to the
      * file.  We have to close the dataset anyway. (SLU - 2010/9/7)
      */
     if(1 == id_ptr->count) {
@@ -1468,9 +1468,9 @@ H5I_dec_app_ref_always_close(hid_t id)
     /* Check for failure */
     if (ret_value < 0) {
         /*
-         * If an object is closing, we can remove the ID even though the free 
+         * If an object is closing, we can remove the ID even though the free
          * method might fail.  This can happen when a mandatory filter fails to
-         * write when a dataset is closed and the chunk cache is flushed to the 
+         * write when a dataset is closed and the chunk cache is flushed to the
          * file.  We have to close the dataset anyway. (SLU - 2010/9/7)
          */
         H5I_remove(id);
@@ -1949,7 +1949,7 @@ H5Isearch(H5I_type_t type, H5I_search_func_t func, void *key)
     udata.app_key = key;
     udata.ret_obj = NULL;
 
-    /* Note that H5I_iterate returns an error code.  We ignore it 
+    /* Note that H5I_iterate returns an error code.  We ignore it
      * here, as we can't do anything with it without revising the API.
      */
     (void)H5I_iterate(type, H5I__search_cb, &udata, TRUE);
@@ -2100,22 +2100,22 @@ H5I__iterate_cb(void *_item, void H5_ATTR_UNUSED *_key, void *_udata)
 /*-------------------------------------------------------------------------
  * Function:	H5I_iterate
  *
- * Purpose:     Apply function FUNC to each member of type TYPE (with 
- *              non-zero application reference count if app_ref is TRUE).  
- *              Stop if FUNC returns a non zero value (i.e. anything 
- *              other than H5_ITER_CONT).  
+ * Purpose:     Apply function FUNC to each member of type TYPE (with
+ *              non-zero application reference count if app_ref is TRUE).
+ *              Stop if FUNC returns a non zero value (i.e. anything
+ *              other than H5_ITER_CONT).
  *
- *              If FUNC returns a positive value (i.e. H5_ITER_STOP), 
+ *              If FUNC returns a positive value (i.e. H5_ITER_STOP),
  *              return SUCCEED.
  *
- *              If FUNC returns a negative value (i.e. H5_ITER_ERROR), 
+ *              If FUNC returns a negative value (i.e. H5_ITER_ERROR),
  *              return FAIL.
- *		
- *              The FUNC should take a pointer to the object and the 
- *              udata as arguments and return non-zero to terminate 
+ *
+ *              The FUNC should take a pointer to the object and the
+ *              udata as arguments and return non-zero to terminate
  *              siteration, and zero to continue.
  *
- * Limitation:  Currently there is no way to start the iteration from 
+ * Limitation:  Currently there is no way to start the iteration from
  *              where a previous iteration left off.
  *
  * Return:      SUCCEED/FAIL
diff --git a/src/H5L.c b/src/H5L.c
index 47e29c0..15f2b7d 100644
--- a/src/H5L.c
+++ b/src/H5L.c
@@ -304,7 +304,7 @@ H5Lmove(hid_t src_loc_id, const char *src_name, hid_t dst_loc_id,
     H5CX_set_lcpl(lcpl_id);
 
     /* Verify access property list and set up collective metadata if appropriate */
-    if(H5CX_set_apl(&lapl_id, H5P_CLS_LACC, 
+    if(H5CX_set_apl(&lapl_id, H5P_CLS_LACC,
             ((src_loc_id != H5L_SAME_LOC) ? src_loc_id : dst_loc_id), TRUE) < 0)
         HGOTO_ERROR(H5E_LINK, H5E_CANTSET, FAIL, "can't set access property list info")
 
@@ -394,7 +394,7 @@ H5Lcopy(hid_t src_loc_id, const char *src_name, hid_t dst_loc_id,
     H5CX_set_lcpl(lcpl_id);
 
     /* Verify access property list and set up collective metadata if appropriate */
-    if(H5CX_set_apl(&lapl_id, H5P_CLS_LACC, 
+    if(H5CX_set_apl(&lapl_id, H5P_CLS_LACC,
             ((src_loc_id != H5L_SAME_LOC) ? src_loc_id : dst_loc_id), TRUE) < 0)
         HGOTO_ERROR(H5E_LINK, H5E_CANTSET, FAIL, "can't set access property list info")
 
@@ -1325,7 +1325,7 @@ H5Literate2(hid_t group_id, H5_index_t idx_type, H5_iter_order_t order,
     loc_params.obj_type = H5I_get_type(group_id);
 
     /* Iterate over the links */
-    if((ret_value = H5VL_link_specific(vol_obj, &loc_params, H5VL_LINK_ITER, H5P_DATASET_XFER_DEFAULT, H5_REQUEST_NULL, (unsigned)FALSE, (int)idx_type, (int)order, idx_p, 
+    if((ret_value = H5VL_link_specific(vol_obj, &loc_params, H5VL_LINK_ITER, H5P_DATASET_XFER_DEFAULT, H5_REQUEST_NULL, (unsigned)FALSE, (int)idx_type, (int)order, idx_p,
             op, op_data)) < 0)
         HGOTO_ERROR(H5E_LINK, H5E_BADITER, FAIL, "link iteration failed")
 
diff --git a/src/H5M.c b/src/H5M.c
index 4d76574..0866bb7 100644
--- a/src/H5M.c
+++ b/src/H5M.c
@@ -475,7 +475,7 @@ H5Mclose(hid_t map_id)
         HGOTO_ERROR(H5E_ARGS, H5E_BADTYPE, FAIL, "not a map ID")
 
     /* Decrement the counter on the map.  It will be freed if the count
-     * reaches zero.  
+     * reaches zero.
      */
     if(H5I_dec_app_ref_always_close(map_id) < 0)
         HGOTO_ERROR(H5E_MAP, H5E_CANTDEC, FAIL, "can't decrement count on map ID")
@@ -848,7 +848,7 @@ done:
  *              restart iteration at the same location on a subsequent
  *              call to H5Miterate, IDX should be the same value as
  *              returned by the previous call.
- * 
+ *
  *              H5M_iterate_t is defined as:
  *              herr_t (*H5M_iterate_t)(hid_t map_id, const void *key,
  *                      void *ctx)
diff --git a/src/H5MF.c b/src/H5MF.c
index df1c88a..5c31f19 100644
--- a/src/H5MF.c
+++ b/src/H5MF.c
@@ -100,7 +100,7 @@ static herr_t H5MF__close_shrink_eoa(H5F_t *f);
 static herr_t H5MF__get_free_sects(H5F_t *f, H5FS_t *fspace, H5MF_sect_iter_ud_t *sect_udata, size_t *nums);
 static hbool_t H5MF__fsm_type_is_self_referential(H5F_shared_t *f_sh, H5F_mem_page_t fsm_type);
 static hbool_t H5MF__fsm_is_self_referential(H5F_shared_t *f_sh, H5FS_t *fspace);
-static herr_t H5MF__continue_alloc_fsm(H5F_shared_t *f_sh, H5FS_t *sm_hdr_fspace, H5FS_t *sm_sinfo_fspace, 
+static herr_t H5MF__continue_alloc_fsm(H5F_shared_t *f_sh, H5FS_t *sm_hdr_fspace, H5FS_t *sm_sinfo_fspace,
     H5FS_t  *lg_hdr_fspace, H5FS_t *lg_sinfo_fspace, hbool_t *continue_alloc_fsm);
 
 /* Free-space type manager routines */
@@ -1307,7 +1307,7 @@ HDfprintf(stderr, "%s: Entering: alloc_type = %u, addr = %a, size = %Hu, extra_r
     end = addr + size;
 
     /* For paged aggregation:
-     *   To extend a small block: can only extend if not crossing page boundary 
+     *   To extend a small block: can only extend if not crossing page boundary
      *   To extend a large block at EOA: calculate in advance mis-aligned fragment so EOA will still end at page boundary
      */
     if(H5F_PAGED_AGGR(f)) {
@@ -1658,8 +1658,8 @@ HDfprintf(stderr, "%s: Entering\n", FUNC);
     /* check args */
     HDassert(f);
 
-    /* If there have been no file space allocations / deallocation so 
-     * far, must call H5MF_tidy_self_referential_fsm_hack() to float 
+    /* If there have been no file space allocations / deallocation so
+     * far, must call H5MF_tidy_self_referential_fsm_hack() to float
      * all self referential FSMs and release file space allocated to
      * them.  Otherwise, the function will be called after the format
      * conversion, and will become very confused.
@@ -1797,9 +1797,9 @@ HDfprintf(stderr, "%s: Entering\n", FUNC);
          */
         HDassert(H5F_addr_defined(f->shared->sblock->ext_addr));
 
-        /* file space for all non-empty free space managers should be 
+        /* file space for all non-empty free space managers should be
          * allocated at this point, and these free space managers should
-         * be written to file and thus their headers and section info 
+         * be written to file and thus their headers and section info
          * entries in the metadata cache should be clean.
          */
 
@@ -1870,8 +1870,8 @@ HDfprintf(stderr, "%s: Entering\n", FUNC);
         if(HADDR_UNDEF == (final_eoa = H5FD_get_eoa(f->shared->lf, H5FD_MEM_DEFAULT)) )
             HGOTO_ERROR(H5E_FILE, H5E_CANTGET, FAIL, "unable to get file size")
 
-        /* f->shared->eoa_post_fsm_fsalloc is undefined if there has 
-         * been no file space allocation or deallocation since file 
+        /* f->shared->eoa_post_fsm_fsalloc is undefined if there has
+         * been no file space allocation or deallocation since file
          * open.
          */
         HDassert(H5F_NULL_FSM_ADDR(f) || final_eoa == f->shared->eoa_fsm_fsalloc);
@@ -2031,13 +2031,13 @@ HDfprintf(stderr, "%s: Entering\n", FUNC);
          * been no file space allocation or deallocation since file
          * open.
          *
-         * If there is a cache image in the file at file open, 
-         * f->shared->first_alloc_dealloc will always be FALSE unless 
+         * If there is a cache image in the file at file open,
+         * f->shared->first_alloc_dealloc will always be FALSE unless
          * the file is opened R/O, as otherwise, the image will have been
          * read and discarded by this point.
          *
-         * If a cache image was created on file close, the actual EOA 
-         * should be in f->shared->eoa_post_mdci_fsalloc.  Note that in 
+         * If a cache image was created on file close, the actual EOA
+         * should be in f->shared->eoa_post_mdci_fsalloc.  Note that in
          * this case, it is conceivable that f->shared->first_alloc_dealloc
          * will still be TRUE, as the cache image is allocated directly from
          * the file driver layer.  However, as this possibility seems remote,
@@ -2049,8 +2049,8 @@ HDfprintf(stderr, "%s: Entering\n", FUNC);
                   (final_eoa == f->shared->eoa_post_mdci_fsalloc)));
     } /* end if */
     else {
-        /* Iterate over all the free space types that have managers 
-         * and get each free list's space 
+        /* Iterate over all the free space types that have managers
+         * and get each free list's space
          */
         for(ptype = H5F_MEM_PAGE_META; ptype < H5F_MEM_PAGE_NTYPES; ptype++)
             if(H5MF__close_delete_fstype(f, ptype) < 0)
@@ -2365,16 +2365,16 @@ H5MF_get_free_sections(H5F_t *f, H5FD_mem_t type, size_t nsects, H5F_sect_info_t
     HDassert(f->shared);
     HDassert(f->shared->lf);
 
-    /* H5MF_tidy_self_referential_fsm_hack() will fail if any self 
+    /* H5MF_tidy_self_referential_fsm_hack() will fail if any self
      * referential FSM is opened prior to the call to it.  Thus call
      * it here if necessary and if it hasn't been called already.
      *
      * The situation is further complicated if a cache image exists
      * and had not yet been loaded into the metadata cache.  In this
-     * case, call H5AC_force_cache_image_load() instead of 
+     * case, call H5AC_force_cache_image_load() instead of
      * H5MF_tidy_self_referential_fsm_hack().  H5AC_force_cache_image_load()
-     * will load the cache image, and then call 
-     * H5MF_tidy_self_referential_fsm_hack() to discard the cache image 
+     * will load the cache image, and then call
+     * H5MF_tidy_self_referential_fsm_hack() to discard the cache image
      * block.
      */
 
@@ -2529,50 +2529,50 @@ done:
 /*-------------------------------------------------------------------------
  * Function:    H5MF_settle_raw_data_fsm()
  *
- * Purpose: 	Handle any tasks required before the metadata cache 
+ * Purpose: 	Handle any tasks required before the metadata cache
  *		can serialize or flush the raw data free space manager
- *		and any metadata free space managers that reside in the 
+ *		and any metadata free space managers that reside in the
  *		raw data free space manager ring.
  *
- *              Specifically, this means any metadata managers that DON'T 
- *              handle space allocation for free space manager header or 
- *              section info will reside in the raw data free space manager 
+ *              Specifically, this means any metadata managers that DON'T
+ *              handle space allocation for free space manager header or
+ *              section info will reside in the raw data free space manager
  *              ring.
  *
- *              In the absence of page allocation, there is at most one 
+ *              In the absence of page allocation, there is at most one
  *		free space manager per memory type defined in H5F_mem_t.
- *		Of these, the one that allocates H5FD_MEM_DRAW will 
+ *		Of these, the one that allocates H5FD_MEM_DRAW will
  *		always reside in the raw data free space manager ring.
- *		If there is more than one metadata free space manager, 
- *		all that don't handle H5FD_MEM_FSPACE_HDR or 
- *              H5FD_MEM_FSPACE_SINFO (which map to H5FD_MEM_OHDR and 
- *              H5FD_MEM_LHEAP respectively) will reside in the raw 
+ *		If there is more than one metadata free space manager,
+ *		all that don't handle H5FD_MEM_FSPACE_HDR or
+ *              H5FD_MEM_FSPACE_SINFO (which map to H5FD_MEM_OHDR and
+ *              H5FD_MEM_LHEAP respectively) will reside in the raw
  *		data free space manager ring as well
  *
- *		With page allocation, the situation is conceptually 
+ *		With page allocation, the situation is conceptually
  *		identical, but more complex in practice.
  *
- *              In the worst case (multi file driver) page allocation 
- *		can result in two free space managers for each memory 
+ *              In the worst case (multi file driver) page allocation
+ *		can result in two free space managers for each memory
  *		type -- one for small (less than on equal to one page)
  *              allocations, and one for large (greater than one page)
  *              allocations.
  *
  *		In the more common one file case, page allocation will
- *              result in a total of three free space managers -- one for 
- *              small (<= one page) raw data allocations, one for small 
- *              metadata allocations (i.e, all memory types other than 
- *              H5FD_MEM_DRAW), and one for all large (> one page) 
+ *              result in a total of three free space managers -- one for
+ *              small (<= one page) raw data allocations, one for small
+ *              metadata allocations (i.e, all memory types other than
+ *              H5FD_MEM_DRAW), and one for all large (> one page)
  *              allocations.
  *
  *              Despite these complications, the solution is the same in
- *		the page allocation case -- free space managers (be they 
- *              small data or large) are assigned to the raw data free 
+ *		the page allocation case -- free space managers (be they
+ *              small data or large) are assigned to the raw data free
  *              space manager ring if they don't allocate file space for
- *              free space managers.  Note that in the one file case, the 
+ *              free space managers.  Note that in the one file case, the
  *		large free space manager must be assigned to the metadata
- *		free space manager ring, as it both allocates pages for 
- *		the metadata free space manager, and allocates space for 
+ *		free space manager ring, as it both allocates pages for
+ *		the metadata free space manager, and allocates space for
  *		large (> 1 page) metadata cache entries.
  *
  *              At present, the task list for this routine is:
@@ -2582,14 +2582,14 @@ done:
  *		    a) Free both aggregators.  Space not at EOA will be
  *		       added to the appropriate free space manager.
  *
- *		       The raw data aggregator should not be restarted 
+ *		       The raw data aggregator should not be restarted
  *		       after this point.  It is possible that the metadata
  *		       aggregator will be.
  *
  *		    b) Free all file space currently allocated to free
  *		       space managers.
  *
- *		    c) Delete the free space manager superblock 
+ *		    c) Delete the free space manager superblock
  *		       extension message if allocated.
  *
  *		   This done, reduce the EOA by moving it to just before
@@ -2597,23 +2597,23 @@ done:
  *
  *		2) Ensure that space is allocated for the free space
  *                 manager superblock extension message.  Must do this
- *                 now, before reallocating file space for free space 
+ *                 now, before reallocating file space for free space
  *		   managers, as it is possible that this allocation may
  *		   grab the last section in a FSM -- making it unnecessary
  *		   to re-allocate file space for it.
  *
  *		3) Scan all free space managers not involved in allocating
  *		   space for free space managers.  For each such free space
- *		   manager, test to see if it contains free space.  If 
+ *		   manager, test to see if it contains free space.  If
  *		   it does, allocate file space for its header and section
- *		   data.  If it contains no free space, leave it without 
- *		   allocated file space as there is no need to save it to 
+ *		   data.  If it contains no free space, leave it without
+ *		   allocated file space as there is no need to save it to
  *		   file.
  *
  *		   Note that all free space managers in this class should
- *		   see no further space allocations / deallocations as 
- *		   at this point, all raw data allocations should be 
- *		   finalized, as should all metadata allocations not 
+ *		   see no further space allocations / deallocations as
+ *		   at this point, all raw data allocations should be
+ *		   finalized, as should all metadata allocations not
  *		   involving free space managers.
  *
  *		   We will allocate space for free space managers involved
@@ -2648,7 +2648,7 @@ H5MF_settle_raw_data_fsm(H5F_t *f, hbool_t *fsm_settled)
     HDassert(f->shared);
     HDassert(fsm_settled);
 
-    /* 
+    /*
      * Only need to settle things if we are persisting free space and
      * the private property in f->shared->null_fsm_addr is not enabled.
      */
@@ -2683,7 +2683,7 @@ H5MF_settle_raw_data_fsm(H5F_t *f, hbool_t *fsm_settled)
          * Note that while the raw data aggregator should not be restarted during
          * the close process, this need not be the case for the metadata aggregator.
          *
-         * Note also that the aggregators will not exist if page aggregation 
+         * Note also that the aggregators will not exist if page aggregation
          * is enabled -- skip this if so.
          */
         /* Vailin -- is this correct? */
@@ -2719,10 +2719,10 @@ H5MF_settle_raw_data_fsm(H5F_t *f, hbool_t *fsm_settled)
          * referential nature of the problem.  These FSMs are dealt with in
          * H5MF_settle_meta_data_fsm().
          *
-         * Since paged allocation may be enabled, there may be up to two 
+         * Since paged allocation may be enabled, there may be up to two
          * free space managers per memory type -- one for small and one for
          * large allocation.  Hence we must loop over the memory types twice
-         * setting the allocation size accordingly if paged allocation is 
+         * setting the allocation size accordingly if paged allocation is
          * enabled.
          */
         for(pass_count = 0; pass_count <= 1; pass_count++) {
@@ -2783,7 +2783,7 @@ H5MF_settle_raw_data_fsm(H5F_t *f, hbool_t *fsm_settled)
 
                         /* Check if the free space manager has space in the file */
                         if(H5F_addr_defined(fs_stat.addr) || H5F_addr_defined(fs_stat.sect_addr)) {
-                            /* Delete the free space manager in the file.  Will 
+                            /* Delete the free space manager in the file.  Will
                              * reallocate later if the free space manager contains
                              * any free space.
                              */
@@ -2808,7 +2808,7 @@ H5MF_settle_raw_data_fsm(H5F_t *f, hbool_t *fsm_settled)
          *    extension messages will choke if the target message is
          *    unexpectedly either absent or present.
          *
-         *    Update: This is probably unnecessary, as I gather that the 
+         *    Update: This is probably unnecessary, as I gather that the
          *            file space manager info message is guaranteed to exist.
          *            Leave it in for now, but consider removing it.
          */
@@ -2911,9 +2911,9 @@ H5MF_settle_raw_data_fsm(H5F_t *f, hbool_t *fsm_settled)
                     fsm_visited[fsm_type] = TRUE;
 
                     if(f->shared->fs_man[fsm_type]) {
-                        /* Only allocate file space if the target free space manager 
-                         * doesn't allocate file space for free space managers.  Note 
-                         * that this is also the deciding factor as to whether a FSM 
+                        /* Only allocate file space if the target free space manager
+                         * doesn't allocate file space for free space managers.  Note
+                         * that this is also the deciding factor as to whether a FSM
                          * in in the raw data FSM ring.
                          */
                         if(!H5MF__fsm_type_is_self_referential(f->shared, fsm_type)) {
@@ -2995,15 +2995,15 @@ done:
 /*-------------------------------------------------------------------------
  * Function:    H5MF_settle_meta_data_fsm()
  *
- * Purpose: 	If the free space manager is persistent, handle any tasks 
- *		required before the metadata cache can serialize or flush 
- *		the metadata free space manager(s) that handle file space 
+ * Purpose: 	If the free space manager is persistent, handle any tasks
+ *		required before the metadata cache can serialize or flush
+ *		the metadata free space manager(s) that handle file space
  *		allocation for free space managers.
  *
- *		In most cases, there will be only one manager assigned 
+ *		In most cases, there will be only one manager assigned
  *		to this role.  However, since for reasons unknown,
- *		free space manager headers and section info blocks are 
- *		different classes of memory, it is possible that two free 
+ *		free space manager headers and section info blocks are
+ *		different classes of memory, it is possible that two free
  *		space managers will be involved.
  *
  *		On entry to this function, the raw data settle routine
@@ -3020,23 +3020,23 @@ done:
  *		5) Re-created the free space manager superblock extension
  *		   message.
  *
- *		6) Reallocated file space for all non-empty free space 
- *		   managers NOT involved in allocation of space for free 
+ *		6) Reallocated file space for all non-empty free space
+ *		   managers NOT involved in allocation of space for free
  *		   space managers.
  *
  *		   Note that these free space managers (if not empty) should
  *		   have been written to file by this point, and that no
- *		   further space allocations involving them should take 
+ *		   further space allocations involving them should take
  *		   place during file close.
  *
  *		On entry to this routine, the free space manager(s) involved
  *		in allocation of file space for free space managers should
- *		still be floating. (i.e. should not have any file space 
+ *		still be floating. (i.e. should not have any file space
  *		allocated to them.)
  *
- *		Similarly, the raw data aggregator should not have been 
- *		restarted.  Note that it is probable that reallocation of 
- *		space in 5) and 6) above will have re-started the metadata 
+ *		Similarly, the raw data aggregator should not have been
+ *		restarted.  Note that it is probable that reallocation of
+ *		space in 5) and 6) above will have re-started the metadata
  *		aggregator.
  *
  *
@@ -3048,35 +3048,35 @@ done:
  *      2) Free the aggregators.
  *
  *      3) Reduce the EOA to the extent possible, and make note
- *		   of the resulting value.  This value will be stored 
+ *		   of the resulting value.  This value will be stored
  *		   in the fsinfo superblock extension message and be used
  *          in the subsequent file open.
  *
  *		4) Re-allocate space for any free space manager(s) that:
  *
- *		   a) are involved in allocation of space for free space 
- *		      managers, and 
+ *		   a) are involved in allocation of space for free space
+ *		      managers, and
  *
  *		   b) contain free space.
  *
- *		   It is possible that we could allocate space for one 
- *		   of these free space manager(s) only to have the allocation 
- *		   result in the free space manager being empty and thus 
+ *		   It is possible that we could allocate space for one
+ *		   of these free space manager(s) only to have the allocation
+ *		   result in the free space manager being empty and thus
  *		   obliging us to free the space again.  Thus there is the
  *		   potential for an infinite loop if we want to avoid saving
  *		   empty free space managers.
  *
- *		   Similarly, it is possible that we could allocate space 
- *		   for a section info block, only to discover that this 
- *		   allocation has changed the size of the section info -- 
+ *		   Similarly, it is possible that we could allocate space
+ *		   for a section info block, only to discover that this
+ *		   allocation has changed the size of the section info --
  *		   forcing us to deallocate and start the loop over again.
  *
- *		   The solution is to modify the FSM code to 
+ *		   The solution is to modify the FSM code to
  *		   save empty FSMs to file, and to allow section info blocks
  *		   to be oversized.  That is, only allow section info to increase
  *         in size, not shrink.  The solution is now implemented.
  *
- *      5) Make note of the EOA -- used for sanity checking on 
+ *      5) Make note of the EOA -- used for sanity checking on
  *         FSM shutdown.  This is saved as eoa_pre_fsm_fsalloc in
  *         the free-space info message for backward compatibility
  *         with the 1.10 library that has the hack.
@@ -3112,7 +3112,7 @@ H5MF_settle_meta_data_fsm(H5F_t *f, hbool_t *fsm_settled)
     HDassert(f->shared);
     HDassert(fsm_settled);
 
-    /* 
+    /*
      * Only need to settle things if we are persisting free space and
      * the private property in f->shared->null_fsm_addr is not enabled.
      */
@@ -3197,8 +3197,8 @@ H5MF_settle_meta_data_fsm(H5F_t *f, hbool_t *fsm_settled)
                 HDassert(fs_stat.alloc_sect_size == 0);
             } /* end if */
 
-            /* Verify that lg_sinfo_fspace is floating if it 
-             * exists and is distinct 
+            /* Verify that lg_sinfo_fspace is floating if it
+             * exists and is distinct
              */
             if((lg_sinfo_fspace) && (lg_hdr_fspace != lg_sinfo_fspace)) {
                 /* Query free space manager info for this type */
@@ -3217,7 +3217,7 @@ H5MF_settle_meta_data_fsm(H5F_t *f, hbool_t *fsm_settled)
          * H5MF_free_aggrs() call.  Note that the raw data aggregator must
          * have already been freed.  Sanity checks for this?
          *
-         * Note that the aggregators will not exist if paged aggregation 
+         * Note that the aggregators will not exist if paged aggregation
          * is enabled -- don't attempt to free if this is the case.
          */
         /* (for space not at EOF, it may be put into free space managers) */
@@ -3228,30 +3228,30 @@ H5MF_settle_meta_data_fsm(H5F_t *f, hbool_t *fsm_settled)
         if(H5MF__close_shrink_eoa(f) < 0)
             HGOTO_ERROR(H5E_RESOURCE, H5E_CANTSHRINK, FAIL, "can't shrink eoa")
 
-        /* WARNING:  This approach settling the self referential free space 
-         *           managers and allocating space for them in the file will 
-         *           not work as currently implemented with the split and 
-         *           multi file drivers, as the self referential free space 
-         *           manager header and section info can be stored in up to 
-         *           two different files -- requiring that up to two EOA's 
-         *           be stored in the the free space managers super block 
-         *           extension message.  
+        /* WARNING:  This approach settling the self referential free space
+         *           managers and allocating space for them in the file will
+         *           not work as currently implemented with the split and
+         *           multi file drivers, as the self referential free space
+         *           manager header and section info can be stored in up to
+         *           two different files -- requiring that up to two EOA's
+         *           be stored in the the free space managers super block
+         *           extension message.
          *
-         *           As of this writing, we are solving this problem by 
-         *           simply not supporting persistent FSMs with the split 
+         *           As of this writing, we are solving this problem by
+         *           simply not supporting persistent FSMs with the split
          *           and multi file drivers.
          *
-         *           Current plans are to do away with the multi file 
+         *           Current plans are to do away with the multi file
          *           driver, so this should be a non-issue in this case.
          *
-         *           We should be able to support the split file driver 
-         *           without a file format change.  However, the code to 
+         *           We should be able to support the split file driver
+         *           without a file format change.  However, the code to
          *           do so does not exist at present.
          * NOTE: not sure whether to remove or keep the above comments
          */
 
-        /* 
-         * Continue allocating file space for the header and section info until 
+        /*
+         * Continue allocating file space for the header and section info until
          * they are all settled,
          */
         do {
@@ -3288,8 +3288,8 @@ H5MF_settle_meta_data_fsm(H5F_t *f, hbool_t *fsm_settled)
 
         /* All free space managers should have file space allocated for them
          * now, and should see no further allocations / deallocations.
-         * For backward compatibility, store the eoa in f->shared->eoa_fsm_fsalloc 
-         * which will be set to fsinfo.eoa_pre_fsm_fsalloc when we actually write 
+         * For backward compatibility, store the eoa in f->shared->eoa_fsm_fsalloc
+         * which will be set to fsinfo.eoa_pre_fsm_fsalloc when we actually write
          * the free-space info message to the superblock extension.
          * This will allow the 1.10 library with the hack to open the file with
          * the new solution.
@@ -3330,7 +3330,7 @@ done:
  *-------------------------------------------------------------------------
  */
 static herr_t
-H5MF__continue_alloc_fsm(H5F_shared_t *f_sh, H5FS_t *sm_hdr_fspace, H5FS_t *sm_sinfo_fspace, 
+H5MF__continue_alloc_fsm(H5F_shared_t *f_sh, H5FS_t *sm_hdr_fspace, H5FS_t *sm_sinfo_fspace,
     H5FS_t  *lg_hdr_fspace, H5FS_t *lg_sinfo_fspace, hbool_t *continue_alloc_fsm)
 {
     FUNC_ENTER_NOAPI_NOINIT_NOERR
diff --git a/src/H5MFaggr.c b/src/H5MFaggr.c
index d716ae2..0124555 100644
--- a/src/H5MFaggr.c
+++ b/src/H5MFaggr.c
@@ -189,11 +189,11 @@ HDfprintf(stderr, "%s: type = %u, size = %Hu\n", FUNC, (unsigned)type, size);
      * The line in #ifdef REPLACE triggers the following problem:
      *   test/objcopy.c: test_copy_group_deep() test fails with the family driver
      *
-     * When closing the destination file after H5Ocopy, the library flushes the fractal 
+     * When closing the destination file after H5Ocopy, the library flushes the fractal
      * heap direct block via H5HF__cache_dblock_pre_serialize().  While doing so,
      * the cache eventually adjusts/evicts ageout entries and ends up flushing out the
      * same entry that is being serialized (flush_in_progress).
-     */ 
+     */
     if((f->shared->feature_flags & aggr->feature_flag) && f->shared->fs_strategy != H5F_FSPACE_STRATEGY_NONE && (!f->shared->closing || !f->shared->fs_persist)) {
 #ifdef REPLACE
     if((f->shared->feature_flags & aggr->feature_flag) && f->shared->fs_strategy != H5F_FSPACE_STRATEGY_NONE && !f->shared->closing) {
@@ -405,7 +405,7 @@ HDfprintf(stderr, "%s: ret_value = %a\n", FUNC, ret_value);
  *-------------------------------------------------------------------------
  */
 htri_t
-H5MF__aggr_try_extend(H5F_t *f, H5F_blk_aggr_t *aggr, 
+H5MF__aggr_try_extend(H5F_t *f, H5F_blk_aggr_t *aggr,
     H5FD_mem_t type, haddr_t blk_end, hsize_t extra_requested)
 {
     htri_t ret_value = FALSE;           /* Return value */
@@ -419,7 +419,7 @@ H5MF__aggr_try_extend(H5F_t *f, H5F_blk_aggr_t *aggr,
 
     /* Check if this aggregator is active */
     if(f->shared->feature_flags & aggr->feature_flag) {
-        /* 
+        /*
          * If the block being tested adjoins the beginning of the aggregator
          *      block, check if the aggregator can accommodate the extension.
          */
@@ -443,7 +443,7 @@ H5MF__aggr_try_extend(H5F_t *f, H5F_blk_aggr_t *aggr,
                 /*
                  * If extra_requested is above percentage threshold:
                  * 1) "bubble" up the aggregator by aggr->alloc_size or extra_requested
-                 * 2) extend the block into the aggregator 
+                 * 2) extend the block into the aggregator
                  */
                 else {
                     hsize_t extra = (extra_requested < aggr->alloc_size) ? aggr->alloc_size : extra_requested;
diff --git a/src/H5MFdbg.c b/src/H5MFdbg.c
index 7bb77e8..43e2305 100644
--- a/src/H5MFdbg.c
+++ b/src/H5MFdbg.c
@@ -115,8 +115,8 @@ H5MF__sects_debug_cb(H5FS_section_info_t *_sect, void *_udata)
     /* Print generic section information */
     HDfprintf(udata->stream, "%*s%-*s %s\n", udata->indent, "", udata->fwidth,
 	      "Section type:",
-          (sect->sect_info.type == H5MF_FSPACE_SECT_SIMPLE ? "simple" : 
-          (sect->sect_info.type == H5MF_FSPACE_SECT_SMALL ? "small" : 
+          (sect->sect_info.type == H5MF_FSPACE_SECT_SIMPLE ? "simple" :
+          (sect->sect_info.type == H5MF_FSPACE_SECT_SMALL ? "small" :
           (sect->sect_info.type == H5MF_FSPACE_SECT_LARGE ? "large" : "unknown"))));
     HDfprintf(udata->stream, "%*s%-*s %a\n", udata->indent, "", udata->fwidth,
 	      "Section address:",
diff --git a/src/H5MFprivate.h b/src/H5MFprivate.h
index de1bdfb..acd773b 100644
--- a/src/H5MFprivate.h
+++ b/src/H5MFprivate.h
@@ -75,9 +75,9 @@ H5_DLL htri_t H5MF_aggrs_try_shrink_eoa(H5F_t *f);
 H5_DLL herr_t H5MF_settle_raw_data_fsm(H5F_t *f, hbool_t *fsm_settled);
 H5_DLL herr_t H5MF_settle_meta_data_fsm(H5F_t *f, hbool_t *fsm_settled);
 
-/* This function has to be declared in H5MFprivate.h as it is needed 
- * in our test code to allow us to manually start a self referential 
- * free space manager prior to the first file space allocations / 
+/* This function has to be declared in H5MFprivate.h as it is needed
+ * in our test code to allow us to manually start a self referential
+ * free space manager prior to the first file space allocations /
  * deallocation without causing assertion failures on the first
  * file space allocation / deallocation.
  */
diff --git a/src/H5MFsection.c b/src/H5MFsection.c
index f661ef9..715ece4 100644
--- a/src/H5MFsection.c
+++ b/src/H5MFsection.c
@@ -186,7 +186,7 @@ H5FS_section_class_t H5MF_FSPACE_SECT_CLS_LARGE[1] = {{
 /* Declare a free list to manage the H5MF_free_section_t struct */
 H5FL_DEFINE(H5MF_free_section_t);
 
-/* 
+/*
  * "simple/small/large" section callbacks
  */
 
@@ -371,7 +371,7 @@ done:
     FUNC_LEAVE_NOAPI((H5FS_section_info_t *)ret_value)
 } /* end H5MF__sect_split() */
 
-/* 
+/*
  * "simple" section callbacks
  */
 
@@ -615,7 +615,7 @@ done:
     FUNC_LEAVE_NOAPI(ret_value)
 } /* H5MF__sect_simple_shrink() */
 
-/* 
+/*
  * "small" section callbacks
  */
 
@@ -625,7 +625,7 @@ done:
  *
  * Purpose:     Perform actions on a small "meta" action before adding it to the free space manager:
  *              1) Drop the section if it is at page end and its size <= page end threshold
- *              2) Adjust section size to include page end threshold if 
+ *              2) Adjust section size to include page end threshold if
  *                 (section size + threshold) is at page end
  *
  * Return:      Success:        non-negative
@@ -792,7 +792,7 @@ done:
     FUNC_LEAVE_NOAPI(ret_value)
 } /* H5MF__sect_small_merge() */
 
-/* 
+/*
  * "Large" section callbacks
  */
 
diff --git a/src/H5MM.c b/src/H5MM.c
index 0add640..cceac4f 100644
--- a/src/H5MM.c
+++ b/src/H5MM.c
@@ -254,7 +254,7 @@ H5MM_final_sanity_check(void)
  *              difficult to check as a return value. This is still
  *              considered an error condition since allocations of zero
  *              bytes usually indicate problems.
- *  
+ *
  * Return:      Success:    Pointer to new memory
  *              Failure:    NULL
  *
diff --git a/src/H5Oattr.c b/src/H5Oattr.c
index 573bb7a..aeaebea 100644
--- a/src/H5Oattr.c
+++ b/src/H5Oattr.c
@@ -36,7 +36,7 @@ static void *H5O__attr_copy_file(H5F_t *file_src, const H5O_msg_class_t *mesg_ty
     void *native_src, H5F_t *file_dst, hbool_t *recompute_size,
     H5O_copy_t *cpy_info, void *udata);
 static herr_t H5O__attr_post_copy_file(const H5O_loc_t *src_oloc,
-    const void *mesg_src, H5O_loc_t *dst_oloc, void *mesg_dst, 
+    const void *mesg_src, H5O_loc_t *dst_oloc, void *mesg_dst,
     H5O_copy_t *cpy_info);
 static herr_t H5O_attr_get_crt_index(const void *_mesg, H5O_msg_crt_idx_t *crt_idx);
 static herr_t H5O_attr_set_crt_index(void *_mesg, H5O_msg_crt_idx_t crt_idx);
diff --git a/src/H5Oattribute.c b/src/H5Oattribute.c
index a4a746e..d498be5 100644
--- a/src/H5Oattribute.c
+++ b/src/H5Oattribute.c
@@ -830,7 +830,7 @@ H5O__attr_write_cb(H5O_t *oh, H5O_mesg_t *mesg/*in,out*/,
             HGOTO_ERROR(H5E_ATTR, H5E_CANTPROTECT, H5_ITER_ERROR, "unable to load object header chunk")
 
         /* Because the attribute structure is shared now. The only situation that requires
-         * copying the data is when the metadata cache evicts and reloads this attribute. 
+         * copying the data is when the metadata cache evicts and reloads this attribute.
          * The shared attribute structure will be different in that situation. SLU-2010/7/29 */
         if(((H5A_t *)mesg->native)->shared != udata->attr->shared) {
             /* Sanity check */
diff --git a/src/H5Ocache.c b/src/H5Ocache.c
index 8bad181..45c55fd 100644
--- a/src/H5Ocache.c
+++ b/src/H5Ocache.c
@@ -66,17 +66,17 @@ static herr_t H5O__cache_get_final_load_size(const void *image_ptr, size_t image
     void *udata, size_t *actual_len);
 static htri_t H5O__cache_verify_chksum(const void *image_ptr, size_t len, void *udata_ptr);
 static void *H5O__cache_deserialize(const void *image, size_t len,
-    void *udata, hbool_t *dirty); 
+    void *udata, hbool_t *dirty);
 static herr_t H5O__cache_image_len(const void *thing, size_t *image_len);
 static herr_t H5O__cache_serialize(const H5F_t *f, void *image, size_t len,
-    void *thing); 
+    void *thing);
 static herr_t H5O__cache_notify(H5AC_notify_action_t action, void *_thing);
 static herr_t H5O__cache_free_icr(void *thing);
 
 static herr_t H5O__cache_chk_get_initial_load_size(void *udata, size_t *image_len);
 static htri_t H5O__cache_chk_verify_chksum(const void *image_ptr, size_t len, void *udata_ptr);
 static void *H5O__cache_chk_deserialize(const void *image, size_t len,
-    void *udata, hbool_t *dirty); 
+    void *udata, hbool_t *dirty);
 static herr_t H5O__cache_chk_image_len(const void *thing, size_t *image_len);
 static herr_t H5O__cache_chk_serialize(const H5F_t *f, void *image, size_t len,
     void *thing);
@@ -161,7 +161,7 @@ H5FL_SEQ_DEFINE(H5O_cont_t);
 /*-------------------------------------------------------------------------
  * Function:    H5O__cache_get_initial_load_size()
  *
- * Purpose:	Tell the metadata cache how much data to read from file in 
+ * Purpose:	Tell the metadata cache how much data to read from file in
  *		the first speculative read for the object header.
  *
  * Return:      Success:        SUCCEED
@@ -288,12 +288,12 @@ H5O__cache_verify_chksum(const void *_image, size_t len, void *_udata)
 /*-------------------------------------------------------------------------
  * Function:    H5O__cache_deserialize
  *
- * Purpose:	Attempt to deserialize the object header contained in the 
- *		supplied buffer, load the data into an instance of H5O_t, and 
+ * Purpose:	Attempt to deserialize the object header contained in the
+ *		supplied buffer, load the data into an instance of H5O_t, and
  *		return a pointer to the new instance.
  *
- *		Note that the object header is read with with a speculative read.  
- *		If the initial read is too small, make note of this fact and return 
+ *		Note that the object header is read with with a speculative read.
+ *		If the initial read is too small, make note of this fact and return
  *     		without error.  H5C_load_entry() will note the size discrepency
  *		and retry the deserialize operation with the correct size read.
  *
@@ -317,7 +317,7 @@ H5O__cache_deserialize(const void *image, size_t H5_ATTR_NDEBUG_UNUSED len, void
 
     /* Check arguments */
     HDassert(image);
-    HDassert(len > 0); 
+    HDassert(len > 0);
     HDassert(udata);
     HDassert(udata->common.f);
     HDassert(udata->common.cont_msg_info);
@@ -441,15 +441,15 @@ H5O__cache_serialize(const H5F_t *f, void *image, size_t len, void *_thing)
     H5O__assert(oh);
 #endif /* H5O_DEBUG */
 
-    /* Point to raw data 'image' for first chunk, which 
-     * has room for the prefix 
+    /* Point to raw data 'image' for first chunk, which
+     * has room for the prefix
      */
     chunk_image = oh->chunk[0].image;
 
     /* Later versions of object header prefix have different format and
      * also require that chunk 0 always be updated, since the checksum
      * on the entire block of memory needs to be updated if anything is
-     * modified 
+     * modified
      */
     if(oh->version > H5O_VERSION_1) {
         uint64_t chunk0_size;       /* Size of chunk 0's data */
@@ -536,11 +536,11 @@ H5O__cache_serialize(const H5F_t *f, void *image, size_t len, void *_thing)
     HDassert((size_t)(chunk_image - oh->chunk[0].image) == (size_t)(H5O_SIZEOF_HDR(oh) - H5O_SIZEOF_CHKSUM_OH(oh)));
 
     /* Serialize messages for this chunk */
-    if(H5O__chunk_serialize(f, oh, (unsigned)0) < 0) 
+    if(H5O__chunk_serialize(f, oh, (unsigned)0) < 0)
         HGOTO_ERROR(H5E_OHDR, H5E_CANTSERIALIZE, FAIL, "unable to serialize first object header chunk")
 
-    /* copy the chunk into the image -- this is potentially expensive.  
-     * Can we rework things so that the object header and the cache 
+    /* copy the chunk into the image -- this is potentially expensive.
+     * Can we rework things so that the object header and the cache
      * share a buffer?
      */
     H5MM_memcpy(image, oh->chunk[0].image, len);
@@ -651,7 +651,7 @@ done:
  */
 static herr_t
 H5O__cache_free_icr(void *_thing)
-{ 
+{
     H5O_t      *oh = (H5O_t *)_thing;   /* Object header to destroy */
     herr_t      ret_value = SUCCEED;    /* Return value */
 
@@ -674,8 +674,8 @@ done:
 /*-------------------------------------------------------------------------
  * Function:    H5O__cache_chk_get_initial_load_size()
  *
- * Purpose:	Tell the metadata cache how large the on disk image of the 
- *		chunk proxy is, so it can load the image into a buffer for the 
+ * Purpose:	Tell the metadata cache how large the on disk image of the
+ *		chunk proxy is, so it can load the image into a buffer for the
  *		deserialize call.
  *
  * Return:      Success:        SUCCEED
@@ -751,7 +751,7 @@ H5O__cache_chk_verify_chksum(const void *_image, size_t len, void *_udata)
  * Function:    H5O__cache_chk_deserialize
  *
  * Purpose:	Attempt to deserialize the object header continuation chunk
- *		contained in the supplied buffer, load the data into an instance 
+ *		contained in the supplied buffer, load the data into an instance
  *		of H5O_chunk_proxy_t, and return a pointer to the new instance.
  *
  * Return:      Success:        Pointer to in core representation
@@ -780,7 +780,7 @@ H5O__cache_chk_deserialize(const void *image, size_t H5_ATTR_NDEBUG_UNUSED len,
     HDassert(dirty);
 
     /* Allocate space for the object header data structure */
-    if(NULL == (chk_proxy = H5FL_CALLOC(H5O_chunk_proxy_t))) 
+    if(NULL == (chk_proxy = H5FL_CALLOC(H5O_chunk_proxy_t)))
         HGOTO_ERROR(H5E_OHDR, H5E_CANTALLOC, NULL, "memory allocation failed")
 
     /* Check if we are still decoding the object header */
@@ -804,7 +804,7 @@ H5O__cache_chk_deserialize(const void *image, size_t H5_ATTR_NDEBUG_UNUSED len,
         /* Set the chunk number for the chunk proxy */
         chk_proxy->chunkno = udata->chunkno;
 
-        /* Sanity check that the chunk representation we have in memory is 
+        /* Sanity check that the chunk representation we have in memory is
          * the same as the one being brought in from disk.
          */
         HDassert(0 == HDmemcmp(image, udata->oh->chunk[chk_proxy->chunkno].image, udata->oh->chunk[chk_proxy->chunkno].size));
@@ -830,7 +830,7 @@ done:
 /*-------------------------------------------------------------------------
  * Function:    H5O__cache_chk_image_len
  *
- * Purpose:	Return the on disk image size of a object header chunk to the 
+ * Purpose:	Return the on disk image size of a object header chunk to the
  *		metadata cache via the image_len.
  *
  * Return:      Success:        SUCCEED
@@ -864,9 +864,9 @@ H5O__cache_chk_image_len(const void *_thing, size_t *image_len)
 /*-------------------------------------------------------------------------
  * Function:    H5O__cache_chk_serialize
  *
- * Purpose:	Given a pointer to an instance of an object header chunk and an 
- *		appropriately sized buffer, serialize the contents of the 
- *		instance for writing to disk, and copy the serialized data 
+ * Purpose:	Given a pointer to an instance of an object header chunk and an
+ *		appropriately sized buffer, serialize the contents of the
+ *		instance for writing to disk, and copy the serialized data
  *		into the buffer.
  *
  * Return:      Success:        SUCCEED
@@ -1263,19 +1263,19 @@ H5O__prefix_deserialize(const uint8_t *_image, H5O_cache_ud_t *udata)
     /* Verify object header prefix length */
     HDassert((size_t)(image - _image) == (size_t)(H5O_SIZEOF_HDR(oh) - H5O_SIZEOF_CHKSUM_OH(oh)));
 
-    /* If udata->oh is to be freed (see H5O__cache_verify_chksum), 
+    /* If udata->oh is to be freed (see H5O__cache_verify_chksum),
        save the pointer to udata->oh and free it later after setting
        udata->oh with the new object header */
     if(udata->free_oh) {
         H5O_t *saved_oh = udata->oh;
-        HDassert(udata->oh); 
+        HDassert(udata->oh);
 
         /* Save the object header for later use in 'deserialize' callback */
         udata->oh = oh;
         if(H5O__free(saved_oh) < 0)
             HGOTO_ERROR(H5E_OHDR, H5E_CANTRELEASE, FAIL, "can't destroy object header")
         udata->free_oh = FALSE;
-    } else 
+    } else
         /* Save the object header for later use in 'deserialize' callback */
         udata->oh = oh;
 
@@ -1491,7 +1491,7 @@ H5O__chunk_deserialize(H5O_t *oh, haddr_t addr, size_t len, const uint8_t *image
                 mesg->type = H5O_msg_class_g[H5O_UNKNOWN_ID];
 
                 /* Check for "fail if unknown" message flags */
-                if(((udata->file_intent & H5F_ACC_RDWR) && 
+                if(((udata->file_intent & H5F_ACC_RDWR) &&
                         (flags & H5O_MSG_FLAG_FAIL_IF_UNKNOWN_AND_OPEN_FOR_WRITE))
                         || (flags & H5O_MSG_FLAG_FAIL_IF_UNKNOWN_ALWAYS))
                     HGOTO_ERROR(H5E_OHDR, H5E_BADMESG, FAIL, "unknown message with 'fail if unknown' flag found")
diff --git a/src/H5Ocache_image.c b/src/H5Ocache_image.c
index 70d9ef5..6ac04c8 100644
--- a/src/H5Ocache_image.c
+++ b/src/H5Ocache_image.c
@@ -40,10 +40,10 @@
 /* Callbacks for message class */
 static void *H5O__mdci_decode(H5F_t *f, H5O_t *open_oh, unsigned mesg_flags,
     unsigned *ioflags, size_t p_size, const uint8_t *p);
-static herr_t H5O__mdci_encode(H5F_t *f, hbool_t disable_shared, 
+static herr_t H5O__mdci_encode(H5F_t *f, hbool_t disable_shared,
     uint8_t *p, const void *_mesg);
 static void *H5O__mdci_copy(const void *_mesg, void *_dest);
-static size_t H5O__mdci_size(const H5F_t *f, hbool_t disable_shared, 
+static size_t H5O__mdci_size(const H5F_t *f, hbool_t disable_shared,
     const void *_mesg);
 static herr_t H5O__mdci_free(void *mesg);
 static herr_t H5O__mdci_delete(H5F_t *f, H5O_t *open_oh, void *_mesg);
@@ -143,7 +143,7 @@ done:
  *-------------------------------------------------------------------------
  */
 static herr_t
-H5O__mdci_encode(H5F_t *f, hbool_t H5_ATTR_UNUSED disable_shared, 
+H5O__mdci_encode(H5F_t *f, hbool_t H5_ATTR_UNUSED disable_shared,
     uint8_t *p, const void *_mesg)
 {
     const H5O_mdci_t *mesg = (const H5O_mdci_t *)_mesg;
@@ -220,7 +220,7 @@ done:
  *-------------------------------------------------------------------------
  */
 static size_t
-H5O__mdci_size(const H5F_t *f, hbool_t H5_ATTR_UNUSED disable_shared, 
+H5O__mdci_size(const H5F_t *f, hbool_t H5_ATTR_UNUSED disable_shared,
     const void H5_ATTR_UNUSED *_mesg)
 {
     size_t ret_value = 0;       /* Return value */
@@ -228,7 +228,7 @@ H5O__mdci_size(const H5F_t *f, hbool_t H5_ATTR_UNUSED disable_shared,
     FUNC_ENTER_STATIC_NOERR
 
     /* Set return value */
-    ret_value = (size_t)( 1 +                   /* Version number           */ 
+    ret_value = (size_t)( 1 +                   /* Version number           */
                           H5F_SIZEOF_ADDR(f) +  /* addr of metadata cache   */
                                                 /* image block              */
                           H5F_SIZEOF_SIZE(f) ); /* length of metadata cache */
diff --git a/src/H5Odtype.c b/src/H5Odtype.c
index c27ece0..6eaaae9 100644
--- a/src/H5Odtype.c
+++ b/src/H5Odtype.c
@@ -43,7 +43,7 @@ static void *H5O__dtype_copy_file(H5F_t *file_src, const H5O_msg_class_t *mesg_t
     void *native_src, H5F_t *file_dst, hbool_t *recompute_size,
     H5O_copy_t *cpy_info, void *udata);
 static herr_t H5O__dtype_shared_post_copy_upd(const H5O_loc_t *src_oloc,
-    const void *mesg_src, H5O_loc_t *dst_oloc, void *mesg_dst, 
+    const void *mesg_src, H5O_loc_t *dst_oloc, void *mesg_dst,
     H5O_copy_t *cpy_info);
 static herr_t H5O__dtype_debug(H5F_t *f, const void *_mesg, FILE * stream,
     int indent, int fwidth);
diff --git a/src/H5Oflush.c b/src/H5Oflush.c
index b441840..898184b 100644
--- a/src/H5Oflush.c
+++ b/src/H5Oflush.c
@@ -270,11 +270,11 @@ done:
  * Purpose:     Refreshes all buffers associated with an object.
  *
  * Note:	This is based on the original H5O_refresh_metadata() but
- *	        is split into 2 routines.  
+ *	        is split into 2 routines.
  *	        This is done so that H5Fstart_swmr_write() can use these
- *	        2 routines to refresh opened objects.  This may be 
+ *	        2 routines to refresh opened objects.  This may be
  *	        restored back to the original code when H5Fstart_swmr_write()
- *	        uses a different approach to handle issues with opened objects.	
+ *	        uses a different approach to handle issues with opened objects.
  *	 	H5Fstart_swmr_write() no longer calls the 1st routine.	(12/24/15)
  *
  * Return:    	Non-negative on success, negative on failure
@@ -383,7 +383,7 @@ H5O__refresh_metadata_close(hid_t oid, H5O_loc_t oloc, H5G_loc_t *obj_loc)
     herr_t ret_value = SUCCEED; /* Return value */
 
     FUNC_ENTER_STATIC
-    
+
     /* Make deep local copy of object's location information */
     if(obj_loc) {
         H5G_loc_t tmp_loc;
diff --git a/src/H5Olayout.c b/src/H5Olayout.c
index 2a2a07b..8e6e204 100644
--- a/src/H5Olayout.c
+++ b/src/H5Olayout.c
@@ -373,7 +373,7 @@ H5O__layout_decode(H5F_t *f, H5O_t H5_ATTR_UNUSED *open_oh,
                 /* Check version */
                 if(mesg->version < H5O_LAYOUT_VERSION_4)
                     HGOTO_ERROR(H5E_OHDR, H5E_VERSION, NULL, "invalid layout version with virtual layout")
-                
+
                 /* Heap information */
                 H5F_addr_decode(f, &p, &(mesg->storage.u.virt.serial_list_hobjid.addr));
                 UINT32DECODE(p, mesg->storage.u.virt.serial_list_hobjid.idx);
diff --git a/src/H5Opkg.h b/src/H5Opkg.h
index fb08f7d..16ea8e5 100644
--- a/src/H5Opkg.h
+++ b/src/H5Opkg.h
@@ -391,15 +391,15 @@ typedef struct H5O_chunk_proxy_t {
     H5O_t       *oh;                    /* Object header for this chunk */
     unsigned    chunkno;                /* Chunk number for this chunk */
 
-    /* Flush depencency parent information (not stored) 
+    /* Flush depencency parent information (not stored)
      *
-     * The following field is used to store a pointer 
+     * The following field is used to store a pointer
      * to the in-core representation of a new chunk proxy's flush dependency
      * parent -- if it exists.  If it does not exist, this field will
      * contain NULL.
      *
-     * If the file is opened in SWMR write mode, the flush dependency 
-     * parent of the chunk proxy will be either its object header 
+     * If the file is opened in SWMR write mode, the flush dependency
+     * parent of the chunk proxy will be either its object header
      * or the chunk with the continuation message that references this chunk.
      */
     void *fd_parent;                    /* Pointer to flush dependency parent */
diff --git a/src/H5Oprivate.h b/src/H5Oprivate.h
index ceaa96d..0be6d89 100644
--- a/src/H5Oprivate.h
+++ b/src/H5Oprivate.h
@@ -223,7 +223,7 @@ typedef struct H5O_copy_t {
 #define H5O_MDCI_MSG_ID 0x0018		/* Metadata Cache Image Message */
 #define H5O_UNKNOWN_ID  0x0019          /* Placeholder message ID for unknown message.  */
                                         /* (this should never exist in a file) */
-/* 
+/*
  * Note: Must increment H5O_MSG_TYPES in H5Opkg.h and update H5O_msg_class_g
  *      in H5O.c when creating a new message type.  Also bump the value of
  *      H5O_BOGUS_INVALID_ID, below, to be one greater than the value of
@@ -482,7 +482,7 @@ typedef struct H5O_storage_chunk_t {
     const struct H5D_chunk_ops_t *ops;  /* Pointer to chunked storage operations */
     union {
         H5O_storage_chunk_btree_t btree;   /* Information for v1 B-tree index   */
-        H5O_storage_chunk_bt2_t btree2;    /* Information for v2 B-tree index */	
+        H5O_storage_chunk_bt2_t btree2;    /* Information for v2 B-tree index */
         H5O_storage_chunk_earray_t earray; /* Information for extensible array index   */
         H5O_storage_chunk_farray_t farray; /* Information for fixed array index   */
         H5O_storage_chunk_single_filt_t single; /* Information for single chunk w/ filters index */
@@ -583,8 +583,8 @@ typedef struct H5O_storage_t {
 typedef struct H5O_layout_chunk_farray_t {
     /* Creation parameters for fixed array data structure */
     struct {
-        uint8_t max_dblk_page_nelmts_bits;  /* Log2(Max. # of elements in a data block page) - 
-                                               i.e. # of bits needed to store max. # of elements 
+        uint8_t max_dblk_page_nelmts_bits;  /* Log2(Max. # of elements in a data block page) -
+                                               i.e. # of bits needed to store max. # of elements
                                                in a data block page */
     } cparam;
 } H5O_layout_chunk_farray_t;
diff --git a/src/H5P.c b/src/H5P.c
index 09ff7f0..9bc293b 100644
--- a/src/H5P.c
+++ b/src/H5P.c
@@ -820,7 +820,7 @@ done:
     H5Pencode2
  PURPOSE
     Routine to convert the property values in a property list into a binary buffer.
-    The encoding of property values will be done according to the file format 
+    The encoding of property values will be done according to the file format
     setting in fapl_id.
  USAGE
     herr_t H5Pencode(plist_id, buf, nalloc, fapl_id)
@@ -878,7 +878,7 @@ done:
     Failure: H5I_INVALID_HID (negative)
  DESCRIPTION
      Decodes a property list from a binary buffer. The contents of the buffer
-     contain the values for the correponding properties of the plist. The decode 
+     contain the values for the correponding properties of the plist. The decode
      callback of a certain property decodes its value from the buffer and sets it
      in the property list.
  GLOBAL VARIABLES
diff --git a/src/H5PB.c b/src/H5PB.c
index 6c83217..45f24e3 100644
--- a/src/H5PB.c
+++ b/src/H5PB.c
@@ -166,7 +166,7 @@ H5FL_DEFINE_STATIC(H5PB_entry_t);
  *
  *-------------------------------------------------------------------------
  */
-herr_t 
+herr_t
 H5PB_reset_stats(H5PB_t *page_buf)
 {
     FUNC_ENTER_NOAPI_NOERR
@@ -208,7 +208,7 @@ H5PB_reset_stats(H5PB_t *page_buf)
  *
  *-------------------------------------------------------------------------
  */
-herr_t 
+herr_t
 H5PB_get_stats(const H5PB_t *page_buf, unsigned accesses[2], unsigned hits[2],
     unsigned misses[2], unsigned evictions[2], unsigned bypasses[2])
 {
@@ -517,9 +517,9 @@ done:
 /*-------------------------------------------------------------------------
  * Function:	H5PB_add_new_page
  *
- * Purpose:	Add a new page to the new page skip list. This is called 
- *              from the MF layer when a new page is allocated to 
- *              indicate to the page buffer layer that a read of the page 
+ * Purpose:	Add a new page to the new page skip list. This is called
+ *              from the MF layer when a new page is allocated to
+ *              indicate to the page buffer layer that a read of the page
  *              from the file is not necessary since it's an empty page.
  *
  * Return:	Non-negative on success/Negative on failure
@@ -577,9 +577,9 @@ done:
 /*-------------------------------------------------------------------------
  * Function:	H5PB_update_entry
  *
- * Purpose:	In PHDF5, entries that are written by other processes and just 
- *              marked clean by this process have to have their corresponding 
- *              pages updated if they exist in the page buffer. 
+ * Purpose:	In PHDF5, entries that are written by other processes and just
+ *              marked clean by this process have to have their corresponding
+ *              pages updated if they exist in the page buffer.
  *              This routine checks and update the pages.
  *
  * Return:	Non-negative on success/Negative on failure
@@ -588,7 +588,7 @@ done:
  *
  *-------------------------------------------------------------------------
  */
-herr_t 
+herr_t
 H5PB_update_entry(H5PB_t *page_buf, haddr_t addr, size_t size, const void *buf)
 {
     H5PB_entry_t *page_entry;   /* Pointer to the corresponding page entry */
@@ -743,7 +743,7 @@ H5PB_read(H5F_shared_t *f_sh, H5FD_mem_t type, haddr_t addr, size_t size, void *
                 page_buf->bypasses[0] ++;
         } /* end if */
 
-        /* If page buffering is disabled, or if this is a large metadata access, 
+        /* If page buffering is disabled, or if this is a large metadata access,
          * or if this is parallel raw data access, we are done here
          */
         if(NULL == page_buf || (size >= page_buf->page_size && H5FD_MEM_DRAW != type) ||
@@ -769,7 +769,7 @@ H5PB_read(H5F_shared_t *f_sh, H5FD_mem_t type, haddr_t addr, size_t size, void *
         last_page_addr = ((addr + size - 1) / page_buf->page_size) * page_buf->page_size;
 
         /* How many pages does this write span */
-        num_touched_pages = (last_page_addr / page_buf->page_size + 1) - 
+        num_touched_pages = (last_page_addr / page_buf->page_size + 1) -
                 (first_page_addr / page_buf->page_size);
         if(first_page_addr == last_page_addr) {
             HDassert(1 == num_touched_pages);
@@ -822,7 +822,7 @@ H5PB_read(H5F_shared_t *f_sh, H5FD_mem_t type, haddr_t addr, size_t size, void *
                         offset = addr - first_page_addr;
                         HDassert(page_buf->page_size > offset);
 
-                        H5MM_memcpy(buf, (uint8_t *)page_entry->page_buf_ptr + offset, 
+                        H5MM_memcpy(buf, (uint8_t *)page_entry->page_buf_ptr + offset,
                                  page_buf->page_size - (size_t)offset);
 
                         /* move to top of LRU list */
@@ -830,7 +830,7 @@ H5PB_read(H5F_shared_t *f_sh, H5FD_mem_t type, haddr_t addr, size_t size, void *
                     } /* end if */
                     /* special handling for the last page if it is not a full page access */
                     else if(num_touched_pages > 1 && i == num_touched_pages-1 && search_addr < addr+size) {
-                        offset = (num_touched_pages-2)*page_buf->page_size + 
+                        offset = (num_touched_pages-2)*page_buf->page_size +
                             (page_buf->page_size - (addr - first_page_addr));
 
                         H5MM_memcpy((uint8_t *)buf + offset, page_entry->page_buf_ptr,
@@ -843,7 +843,7 @@ H5PB_read(H5F_shared_t *f_sh, H5FD_mem_t type, haddr_t addr, size_t size, void *
                     else {
                         offset = i*page_buf->page_size;
 
-                        H5MM_memcpy((uint8_t *)buf+(i*page_buf->page_size) , page_entry->page_buf_ptr, 
+                        H5MM_memcpy((uint8_t *)buf+(i*page_buf->page_size) , page_entry->page_buf_ptr,
                              page_buf->page_size);
                     } /* end else */
                 } /* end if */
@@ -1039,7 +1039,7 @@ H5PB_write(H5F_shared_t *f_sh, H5FD_mem_t type, haddr_t addr,
                 page_buf->bypasses[0]++;
         } /* end if */
 
-        /* If page buffering is disabled, or if this is a large metadata access, 
+        /* If page buffering is disabled, or if this is a large metadata access,
          * or if this is a parallel raw data access, we are done here
          */
         if(NULL == page_buf || (size >= page_buf->page_size && H5FD_MEM_DRAW != type) ||
@@ -1073,7 +1073,7 @@ H5PB_write(H5F_shared_t *f_sh, H5FD_mem_t type, haddr_t addr,
         last_page_addr = (addr + size - 1) / page_buf->page_size * page_buf->page_size;
 
         /* how many pages does this write span */
-        num_touched_pages = (last_page_addr/page_buf->page_size + 1) - 
+        num_touched_pages = (last_page_addr/page_buf->page_size + 1) -
             (first_page_addr / page_buf->page_size);
         if(first_page_addr == last_page_addr) {
             HDassert(1 == num_touched_pages);
@@ -1114,18 +1114,18 @@ H5PB_write(H5F_shared_t *f_sh, H5FD_mem_t type, haddr_t addr,
                 } /* end if */
             } /* end if */
             /* Special handling for the last page if it is not a full page update */
-            else if(num_touched_pages > 1 && i == (num_touched_pages - 1) && 
+            else if(num_touched_pages > 1 && i == (num_touched_pages - 1) &&
                     (search_addr + page_buf->page_size) != (addr + size)) {
                 HDassert(search_addr+page_buf->page_size > addr+size);
 
                 /* Lookup the page in the skip list */
                 page_entry = (H5PB_entry_t *)H5SL_search(page_buf->slist_ptr, (void *)(&search_addr));
                 if(page_entry) {
-                    offset = (num_touched_pages - 2) * page_buf->page_size + 
+                    offset = (num_touched_pages - 2) * page_buf->page_size +
                         (page_buf->page_size - (addr - first_page_addr));
 
                     /* Update page's data */
-                    H5MM_memcpy(page_entry->page_buf_ptr, (const uint8_t *)buf + offset, 
+                    H5MM_memcpy(page_entry->page_buf_ptr, (const uint8_t *)buf + offset,
                              (size_t)((addr + size) - last_page_addr));
 
                     /* Mark page dirty and push to top of LRU */
@@ -1313,7 +1313,7 @@ done:
 /*-------------------------------------------------------------------------
  * Function:	H5PB__insert_entry()
  *
- * Purpose: ??? 
+ * Purpose: ???
  *
  *          This function was created without documentation.
  *          What follows is my best understanding of Mohamad's intent.
@@ -1334,7 +1334,7 @@ done:
  *
  *-------------------------------------------------------------------------
  */
-static herr_t 
+static herr_t
 H5PB__insert_entry(H5PB_t *page_buf, H5PB_entry_t *page_entry)
 {
     herr_t ret_value = SUCCEED;    /* Return value */
@@ -1399,7 +1399,7 @@ H5PB__make_space(H5F_shared_t *f_sh, H5PB_t *page_buf, H5FD_mem_t inserted_type)
 
         /* check the metadata threshold before evicting metadata items */
         while(1) {
-            if(page_entry->prev && H5F_MEM_PAGE_META == page_entry->type && 
+            if(page_entry->prev && H5F_MEM_PAGE_META == page_entry->type &&
                     page_buf->min_meta_count >= page_buf->meta_count)
                 page_entry = page_entry->prev;
             else
@@ -1416,7 +1416,7 @@ H5PB__make_space(H5F_shared_t *f_sh, H5PB_t *page_buf, H5FD_mem_t inserted_type)
 
         /* check the raw data threshold before evicting raw data items */
         while(1) {
-            if(page_entry->prev && (H5F_MEM_PAGE_DRAW == page_entry->type || H5F_MEM_PAGE_GHEAP == page_entry->type) && 
+            if(page_entry->prev && (H5F_MEM_PAGE_DRAW == page_entry->type || H5F_MEM_PAGE_GHEAP == page_entry->type) &&
                     page_buf->min_raw_count >= page_buf->raw_count)
                 page_entry = page_entry->prev;
             else
@@ -1461,7 +1461,7 @@ done:
 /*-------------------------------------------------------------------------
  * Function:	H5PB__write_entry()
  *
- * Purpose: ??? 
+ * Purpose: ???
  *
  *          This function was created without documentation.
  *          What follows is my best understanding of Mohamad's intent.
diff --git a/src/H5Pdcpl.c b/src/H5Pdcpl.c
index 09ba2ee..7e49c4b 100644
--- a/src/H5Pdcpl.c
+++ b/src/H5Pdcpl.c
@@ -251,25 +251,25 @@ H5P__dcrt_reg_prop(H5P_genclass_t *pclass)
     FUNC_ENTER_STATIC
 
     /* Register the storage layout property */
-    if(H5P__register_real(pclass, H5D_CRT_LAYOUT_NAME, H5D_CRT_LAYOUT_SIZE, &H5D_def_layout_g, 
+    if(H5P__register_real(pclass, H5D_CRT_LAYOUT_NAME, H5D_CRT_LAYOUT_SIZE, &H5D_def_layout_g,
             NULL, H5D_CRT_LAYOUT_SET, H5D_CRT_LAYOUT_GET, H5D_CRT_LAYOUT_ENC, H5D_CRT_LAYOUT_DEC,
             H5D_CRT_LAYOUT_DEL, H5D_CRT_LAYOUT_COPY, H5D_CRT_LAYOUT_CMP, H5D_CRT_LAYOUT_CLOSE) < 0)
         HGOTO_ERROR(H5E_PLIST, H5E_CANTINSERT, FAIL, "can't insert property into class")
 
     /* Register the fill value property */
-    if(H5P__register_real(pclass, H5D_CRT_FILL_VALUE_NAME, H5D_CRT_FILL_VALUE_SIZE, &H5D_def_fill_g, 
+    if(H5P__register_real(pclass, H5D_CRT_FILL_VALUE_NAME, H5D_CRT_FILL_VALUE_SIZE, &H5D_def_fill_g,
             NULL, H5D_CRT_FILL_VALUE_SET, H5D_CRT_FILL_VALUE_GET, H5D_CRT_FILL_VALUE_ENC, H5D_CRT_FILL_VALUE_DEC,
             H5D_CRT_FILL_VALUE_DEL, H5D_CRT_FILL_VALUE_COPY, H5D_CRT_FILL_VALUE_CMP, H5D_CRT_FILL_VALUE_CLOSE) < 0)
         HGOTO_ERROR(H5E_PLIST, H5E_CANTINSERT, FAIL, "can't insert property into class")
 
     /* Register the space allocation time state property */
-    if(H5P__register_real(pclass, H5D_CRT_ALLOC_TIME_STATE_NAME, H5D_CRT_ALLOC_TIME_STATE_SIZE, &H5D_def_alloc_time_state_g, 
+    if(H5P__register_real(pclass, H5D_CRT_ALLOC_TIME_STATE_NAME, H5D_CRT_ALLOC_TIME_STATE_SIZE, &H5D_def_alloc_time_state_g,
             NULL, NULL, NULL, H5D_CRT_ALLOC_TIME_STATE_ENC, H5D_CRT_ALLOC_TIME_STATE_DEC,
             NULL, NULL, NULL, NULL) < 0)
         HGOTO_ERROR(H5E_PLIST, H5E_CANTINSERT, FAIL, "can't insert property into class")
 
     /* Register the external file list property */
-    if(H5P__register_real(pclass, H5D_CRT_EXT_FILE_LIST_NAME, H5D_CRT_EXT_FILE_LIST_SIZE, &H5D_def_efl_g, 
+    if(H5P__register_real(pclass, H5D_CRT_EXT_FILE_LIST_NAME, H5D_CRT_EXT_FILE_LIST_SIZE, &H5D_def_efl_g,
             NULL, H5D_CRT_EXT_FILE_LIST_SET, H5D_CRT_EXT_FILE_LIST_GET, H5D_CRT_EXT_FILE_LIST_ENC, H5D_CRT_EXT_FILE_LIST_DEC,
             H5D_CRT_EXT_FILE_LIST_DEL, H5D_CRT_EXT_FILE_LIST_COPY, H5D_CRT_EXT_FILE_LIST_CMP, H5D_CRT_EXT_FILE_LIST_CLOSE) < 0)
        HGOTO_ERROR(H5E_PLIST, H5E_CANTINSERT, FAIL, "can't insert property into class")
@@ -1512,7 +1512,7 @@ H5P__dcrt_ext_file_list_dec(const void **_pp, void *_value)
         size_t len;
         if(efl->nused >= efl->nalloc) {
             size_t na = efl->nalloc + H5O_EFL_ALLOC;
-            H5O_efl_entry_t *x = (H5O_efl_entry_t *)H5MM_realloc(efl->slot, 
+            H5O_efl_entry_t *x = (H5O_efl_entry_t *)H5MM_realloc(efl->slot,
                                                                  na * sizeof(H5O_efl_entry_t));
             if(!x)
                 HGOTO_ERROR(H5E_RESOURCE, H5E_CANTALLOC, FAIL, "memory allocation failed")
@@ -2222,7 +2222,7 @@ H5Pset_virtual(hid_t dcpl_id, hid_t vspace_id, const char *src_file_name,
     if((ent->psfn_nsubs == 0) && (ent->psdn_nsubs == 0)) {
         if(ent->parsed_source_file_name)
             ent->source_dset.file_name = ent->parsed_source_file_name->name_segment;
-        else 
+        else
             ent->source_dset.file_name = ent->source_file_name;
         if(ent->parsed_source_dset_name)
             ent->source_dset.dset_name = ent->parsed_source_dset_name->name_segment;
@@ -2342,7 +2342,7 @@ done:
  * Purpose:     Takes the dataset creation property list for the virtual
  *              dataset, dcpl_id, and the mapping index, index, and
  *              returns a dataspace identifier for the selection within
- *              the virtual dataset used in the mapping. 
+ *              the virtual dataset used in the mapping.
  *
  * Return:      Returns a dataspace identifier if successful; otherwise
  *              returns a negative value.
@@ -2400,7 +2400,7 @@ done:
  * Purpose:     Takes the dataset creation property list for the virtual
  *              dataset, dcpl_id, and the mapping index, index, and
  *              returns a dataspace identifier for the selection within
- *              the source dataset used in the mapping. 
+ *              the source dataset used in the mapping.
  *
  * Return:      Returns a dataspace identifier if successful; otherwise
  *              returns a negative value.
@@ -2504,7 +2504,7 @@ done:
  *              be the size in bytes of the filename.  That value, plus 1
  *              for a NULL terminator, is then assigned to size for a
  *              second H5Pget_virtual_filename call, which will retrieve
- *              the actual filename. 
+ *              the actual filename.
  *
  * Return:      Returns the length of the name if successful, otherwise
  *              returns a negative value.
@@ -2567,7 +2567,7 @@ done:
  *              be the size in bytes of the dataset name.  That value, plus 1
  *              for a NULL terminator, is then assigned to size for a
  *              second H5Pget_virtual_dsetname call, which will retrieve
- *              the actual dataset name. 
+ *              the actual dataset name.
  *
  * Return:      Returns the length of the name if successful, otherwise
  *              returns a negative value.
diff --git a/src/H5Pdeprec.c b/src/H5Pdeprec.c
index 1b5f581..b9efaee 100644
--- a/src/H5Pdeprec.c
+++ b/src/H5Pdeprec.c
@@ -563,9 +563,9 @@ H5Pset_file_space(hid_t plist_id, H5F_file_space_type_t strategy, hsize_t thresh
         HGOTO_ERROR(H5E_ARGS, H5E_BADVALUE, FAIL, "invalid strategy")
     /*
      *  For 1.10.0 H5Pset_file_space:
-     *      If strategy is zero, the property is not changed; 
+     *      If strategy is zero, the property is not changed;
      *      the existing strategy is retained.
-     *      If threshold is zero, the property is not changed; 
+     *      If threshold is zero, the property is not changed;
      *      the existing threshold is retained.
      */
     if(!in_strategy)
@@ -579,7 +579,7 @@ H5Pset_file_space(hid_t plist_id, H5F_file_space_type_t strategy, hsize_t thresh
             new_persist = TRUE;
             new_threshold = in_threshold;
             break;
-    
+
         case H5F_FILE_SPACE_ALL:
             new_strategy = H5F_FSPACE_STRATEGY_FSM_AGGR;
             new_threshold = in_threshold;
@@ -592,7 +592,7 @@ H5Pset_file_space(hid_t plist_id, H5F_file_space_type_t strategy, hsize_t thresh
         case H5F_FILE_SPACE_VFD:
             new_strategy = H5F_FSPACE_STRATEGY_NONE;
             break;
-        
+
         case H5F_FILE_SPACE_NTYPES:
         case H5F_FILE_SPACE_DEFAULT:
         default:
diff --git a/src/H5Pdxpl.c b/src/H5Pdxpl.c
index 9baa201..3f5754e 100644
--- a/src/H5Pdxpl.c
+++ b/src/H5Pdxpl.c
@@ -128,7 +128,7 @@
 #define H5D_MPIO_ACTUAL_IO_MODE_DEF     H5D_MPIO_NO_COLLECTIVE
 /* Definitions for cause of broken collective io property */
 #define H5D_MPIO_NO_COLLECTIVE_CAUSE_SIZE   sizeof(uint32_t)
-#define H5D_MPIO_NO_COLLECTIVE_CAUSE_DEF   H5D_MPIO_COLLECTIVE 
+#define H5D_MPIO_NO_COLLECTIVE_CAUSE_DEF   H5D_MPIO_COLLECTIVE
 
 /* Definitions for EDC property */
 #define H5D_XFER_EDC_SIZE           sizeof(H5Z_EDC_t)
@@ -245,7 +245,7 @@ static const unsigned H5D_def_mpio_chunk_opt_num_g = H5D_XFER_MPIO_CHUNK_OPT_NUM
 static const unsigned H5D_def_mpio_chunk_opt_ratio_g = H5D_XFER_MPIO_CHUNK_OPT_RATIO_DEF;
 static const H5D_mpio_actual_chunk_opt_mode_t H5D_def_mpio_actual_chunk_opt_mode_g = H5D_MPIO_ACTUAL_CHUNK_OPT_MODE_DEF;
 static const H5D_mpio_actual_io_mode_t H5D_def_mpio_actual_io_mode_g = H5D_MPIO_ACTUAL_IO_MODE_DEF;
-static const H5D_mpio_no_collective_cause_t H5D_def_mpio_no_collective_cause_g = H5D_MPIO_NO_COLLECTIVE_CAUSE_DEF; 
+static const H5D_mpio_no_collective_cause_t H5D_def_mpio_no_collective_cause_g = H5D_MPIO_NO_COLLECTIVE_CAUSE_DEF;
 static const H5Z_EDC_t H5D_def_enable_edc_g = H5D_XFER_EDC_DEF;            /* Default value for EDC property */
 static const H5Z_cb_t H5D_def_filter_cb_g = H5D_XFER_FILTER_CB_DEF;        /* Default value for filter callback */
 static const H5T_conv_cb_t H5D_def_conv_cb_g = H5D_XFER_CONV_CB_DEF;       /* Default value for datatype conversion callback */
@@ -271,96 +271,96 @@ H5P__dxfr_reg_prop(H5P_genclass_t *pclass)
     FUNC_ENTER_STATIC
 
     /* Register the max. temp buffer size property */
-    if(H5P__register_real(pclass, H5D_XFER_MAX_TEMP_BUF_NAME, H5D_XFER_MAX_TEMP_BUF_SIZE, &H5D_def_max_temp_buf_g, 
+    if(H5P__register_real(pclass, H5D_XFER_MAX_TEMP_BUF_NAME, H5D_XFER_MAX_TEMP_BUF_SIZE, &H5D_def_max_temp_buf_g,
             NULL, NULL, NULL, H5D_XFER_MAX_TEMP_BUF_ENC, H5D_XFER_MAX_TEMP_BUF_DEC,
             NULL, NULL, NULL, NULL) < 0)
         HGOTO_ERROR(H5E_PLIST, H5E_CANTINSERT, FAIL, "can't insert property into class")
 
     /* Register the type conversion buffer property */
     /* (Note: this property should not have an encode/decode callback -QAK) */
-    if(H5P__register_real(pclass, H5D_XFER_TCONV_BUF_NAME, H5D_XFER_TCONV_BUF_SIZE, &H5D_def_tconv_buf_g, 
+    if(H5P__register_real(pclass, H5D_XFER_TCONV_BUF_NAME, H5D_XFER_TCONV_BUF_SIZE, &H5D_def_tconv_buf_g,
             NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL) < 0)
         HGOTO_ERROR(H5E_PLIST, H5E_CANTINSERT, FAIL, "can't insert property into class")
 
     /* Register the background buffer property */
     /* (Note: this property should not have an encode/decode callback -QAK) */
-    if(H5P__register_real(pclass, H5D_XFER_BKGR_BUF_NAME, H5D_XFER_BKGR_BUF_SIZE, &H5D_def_bkgr_buf_g, 
+    if(H5P__register_real(pclass, H5D_XFER_BKGR_BUF_NAME, H5D_XFER_BKGR_BUF_SIZE, &H5D_def_bkgr_buf_g,
             NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL) < 0)
         HGOTO_ERROR(H5E_PLIST, H5E_CANTINSERT, FAIL, "can't insert property into class")
 
     /* Register the background buffer type property */
-    if(H5P__register_real(pclass, H5D_XFER_BKGR_BUF_TYPE_NAME, H5D_XFER_BKGR_BUF_TYPE_SIZE, &H5D_def_bkgr_buf_type_g, 
+    if(H5P__register_real(pclass, H5D_XFER_BKGR_BUF_TYPE_NAME, H5D_XFER_BKGR_BUF_TYPE_SIZE, &H5D_def_bkgr_buf_type_g,
              NULL, NULL, NULL, H5D_XFER_BKGR_BUF_TYPE_ENC, H5D_XFER_BKGR_BUF_TYPE_DEC,
              NULL, NULL, NULL, NULL) < 0)
         HGOTO_ERROR(H5E_PLIST, H5E_CANTINSERT, FAIL, "can't insert property into class")
 
     /* Register the B-Tree node splitting ratios property */
-    if(H5P__register_real(pclass, H5D_XFER_BTREE_SPLIT_RATIO_NAME, H5D_XFER_BTREE_SPLIT_RATIO_SIZE, H5D_def_btree_split_ratio_g, 
+    if(H5P__register_real(pclass, H5D_XFER_BTREE_SPLIT_RATIO_NAME, H5D_XFER_BTREE_SPLIT_RATIO_SIZE, H5D_def_btree_split_ratio_g,
             NULL, NULL, NULL, H5D_XFER_BTREE_SPLIT_RATIO_ENC, H5D_XFER_BTREE_SPLIT_RATIO_DEC,
             NULL, NULL, NULL, NULL) < 0)
         HGOTO_ERROR(H5E_PLIST, H5E_CANTINSERT, FAIL, "can't insert property into class")
 
     /* Register the vlen allocation function property */
     /* (Note: this property should not have an encode/decode callback -QAK) */
-    if(H5P__register_real(pclass, H5D_XFER_VLEN_ALLOC_NAME, H5D_XFER_VLEN_ALLOC_SIZE, &H5D_def_vlen_alloc_g, 
+    if(H5P__register_real(pclass, H5D_XFER_VLEN_ALLOC_NAME, H5D_XFER_VLEN_ALLOC_SIZE, &H5D_def_vlen_alloc_g,
             NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL) < 0)
         HGOTO_ERROR(H5E_PLIST, H5E_CANTINSERT, FAIL, "can't insert property into class")
 
     /* Register the vlen allocation information property */
     /* (Note: this property should not have an encode/decode callback -QAK) */
-    if(H5P__register_real(pclass, H5D_XFER_VLEN_ALLOC_INFO_NAME, H5D_XFER_VLEN_ALLOC_INFO_SIZE, &H5D_def_vlen_alloc_info_g, 
+    if(H5P__register_real(pclass, H5D_XFER_VLEN_ALLOC_INFO_NAME, H5D_XFER_VLEN_ALLOC_INFO_SIZE, &H5D_def_vlen_alloc_info_g,
             NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL) < 0)
         HGOTO_ERROR(H5E_PLIST, H5E_CANTINSERT, FAIL, "can't insert property into class")
 
     /* Register the vlen free function property */
     /* (Note: this property should not have an encode/decode callback -QAK) */
-    if(H5P__register_real(pclass, H5D_XFER_VLEN_FREE_NAME, H5D_XFER_VLEN_FREE_SIZE, &H5D_def_vlen_free_g, 
+    if(H5P__register_real(pclass, H5D_XFER_VLEN_FREE_NAME, H5D_XFER_VLEN_FREE_SIZE, &H5D_def_vlen_free_g,
             NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL) < 0)
         HGOTO_ERROR(H5E_PLIST, H5E_CANTINSERT, FAIL, "can't insert property into class")
 
     /* Register the vlen free information property */
     /* (Note: this property should not have an encode/decode callback -QAK) */
-    if(H5P__register_real(pclass, H5D_XFER_VLEN_FREE_INFO_NAME, H5D_XFER_VLEN_FREE_INFO_SIZE, &H5D_def_vlen_free_info_g, 
+    if(H5P__register_real(pclass, H5D_XFER_VLEN_FREE_INFO_NAME, H5D_XFER_VLEN_FREE_INFO_SIZE, &H5D_def_vlen_free_info_g,
             NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL) < 0)
         HGOTO_ERROR(H5E_PLIST, H5E_CANTINSERT, FAIL, "can't insert property into class")
 
     /* Register the vector size property */
-    if(H5P__register_real(pclass, H5D_XFER_HYPER_VECTOR_SIZE_NAME, H5D_XFER_HYPER_VECTOR_SIZE_SIZE, &H5D_def_hyp_vec_size_g, 
+    if(H5P__register_real(pclass, H5D_XFER_HYPER_VECTOR_SIZE_NAME, H5D_XFER_HYPER_VECTOR_SIZE_SIZE, &H5D_def_hyp_vec_size_g,
             NULL, NULL, NULL, H5D_XFER_HYPER_VECTOR_SIZE_ENC, H5D_XFER_HYPER_VECTOR_SIZE_DEC,
             NULL, NULL, NULL, NULL) < 0)
         HGOTO_ERROR(H5E_PLIST, H5E_CANTINSERT, FAIL, "can't insert property into class")
 
     /* Register the I/O transfer mode properties */
-    if(H5P__register_real(pclass, H5D_XFER_IO_XFER_MODE_NAME, H5D_XFER_IO_XFER_MODE_SIZE, &H5D_def_io_xfer_mode_g, 
+    if(H5P__register_real(pclass, H5D_XFER_IO_XFER_MODE_NAME, H5D_XFER_IO_XFER_MODE_SIZE, &H5D_def_io_xfer_mode_g,
             NULL, NULL, NULL, H5D_XFER_IO_XFER_MODE_ENC, H5D_XFER_IO_XFER_MODE_DEC,
             NULL, NULL, NULL, NULL) < 0)
         HGOTO_ERROR(H5E_PLIST, H5E_CANTINSERT, FAIL, "can't insert property into class")
-    if(H5P__register_real(pclass, H5D_XFER_MPIO_COLLECTIVE_OPT_NAME, H5D_XFER_MPIO_COLLECTIVE_OPT_SIZE, &H5D_def_mpio_collective_opt_mode_g, 
+    if(H5P__register_real(pclass, H5D_XFER_MPIO_COLLECTIVE_OPT_NAME, H5D_XFER_MPIO_COLLECTIVE_OPT_SIZE, &H5D_def_mpio_collective_opt_mode_g,
             NULL, NULL, NULL, H5D_XFER_MPIO_COLLECTIVE_OPT_ENC, H5D_XFER_MPIO_COLLECTIVE_OPT_DEC,
             NULL, NULL, NULL, NULL) < 0)
         HGOTO_ERROR(H5E_PLIST, H5E_CANTINSERT, FAIL, "can't insert property into class")
-    if(H5P__register_real(pclass, H5D_XFER_MPIO_CHUNK_OPT_HARD_NAME, H5D_XFER_MPIO_CHUNK_OPT_HARD_SIZE, &H5D_def_mpio_chunk_opt_mode_g, 
+    if(H5P__register_real(pclass, H5D_XFER_MPIO_CHUNK_OPT_HARD_NAME, H5D_XFER_MPIO_CHUNK_OPT_HARD_SIZE, &H5D_def_mpio_chunk_opt_mode_g,
             NULL, NULL, NULL, H5D_XFER_MPIO_CHUNK_OPT_HARD_ENC, H5D_XFER_MPIO_CHUNK_OPT_HARD_DEC,
             NULL, NULL, NULL, NULL) < 0)
         HGOTO_ERROR(H5E_PLIST, H5E_CANTINSERT, FAIL, "can't insert property into class")
-    if(H5P__register_real(pclass, H5D_XFER_MPIO_CHUNK_OPT_NUM_NAME, H5D_XFER_MPIO_CHUNK_OPT_NUM_SIZE, &H5D_def_mpio_chunk_opt_num_g, 
+    if(H5P__register_real(pclass, H5D_XFER_MPIO_CHUNK_OPT_NUM_NAME, H5D_XFER_MPIO_CHUNK_OPT_NUM_SIZE, &H5D_def_mpio_chunk_opt_num_g,
             NULL, NULL, NULL, H5D_XFER_MPIO_CHUNK_OPT_NUM_ENC, H5D_XFER_MPIO_CHUNK_OPT_NUM_DEC,
             NULL, NULL, NULL, NULL) < 0)
         HGOTO_ERROR(H5E_PLIST, H5E_CANTINSERT, FAIL, "can't insert property into class")
-    if(H5P__register_real(pclass, H5D_XFER_MPIO_CHUNK_OPT_RATIO_NAME, H5D_XFER_MPIO_CHUNK_OPT_RATIO_SIZE, &H5D_def_mpio_chunk_opt_ratio_g, 
+    if(H5P__register_real(pclass, H5D_XFER_MPIO_CHUNK_OPT_RATIO_NAME, H5D_XFER_MPIO_CHUNK_OPT_RATIO_SIZE, &H5D_def_mpio_chunk_opt_ratio_g,
             NULL, NULL, NULL, H5D_XFER_MPIO_CHUNK_OPT_RATIO_ENC, H5D_XFER_MPIO_CHUNK_OPT_RATIO_DEC,
             NULL, NULL, NULL, NULL) < 0)
         HGOTO_ERROR(H5E_PLIST, H5E_CANTINSERT, FAIL, "can't insert property into class")
 
     /* Register the chunk optimization mode property. */
     /* (Note: this property should not have an encode/decode callback -QAK) */
-    if(H5P__register_real(pclass, H5D_MPIO_ACTUAL_CHUNK_OPT_MODE_NAME, H5D_MPIO_ACTUAL_CHUNK_OPT_MODE_SIZE, &H5D_def_mpio_actual_chunk_opt_mode_g, 
+    if(H5P__register_real(pclass, H5D_MPIO_ACTUAL_CHUNK_OPT_MODE_NAME, H5D_MPIO_ACTUAL_CHUNK_OPT_MODE_SIZE, &H5D_def_mpio_actual_chunk_opt_mode_g,
             NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL) < 0)
         HGOTO_ERROR(H5E_PLIST, H5E_CANTINSERT, FAIL, "can't insert property into class")
 
     /* Register the actual I/O mode property. */
     /* (Note: this property should not have an encode/decode callback -QAK) */
-    if(H5P__register_real(pclass, H5D_MPIO_ACTUAL_IO_MODE_NAME, H5D_MPIO_ACTUAL_IO_MODE_SIZE, &H5D_def_mpio_actual_io_mode_g, 
+    if(H5P__register_real(pclass, H5D_MPIO_ACTUAL_IO_MODE_NAME, H5D_MPIO_ACTUAL_IO_MODE_SIZE, &H5D_def_mpio_actual_io_mode_g,
             NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL) < 0)
         HGOTO_ERROR(H5E_PLIST, H5E_CANTINSERT, FAIL, "can't insert property into class")
 
@@ -396,7 +396,7 @@ H5P__dxfr_reg_prop(H5P_genclass_t *pclass)
 
     /* Register the data transform property */
     if(H5P__register_real(pclass, H5D_XFER_XFORM_NAME, H5D_XFER_XFORM_SIZE, &H5D_def_xfer_xform_g,
-            NULL, H5D_XFER_XFORM_SET, H5D_XFER_XFORM_GET, H5D_XFER_XFORM_ENC, H5D_XFER_XFORM_DEC, 
+            NULL, H5D_XFER_XFORM_SET, H5D_XFER_XFORM_GET, H5D_XFER_XFORM_ENC, H5D_XFER_XFORM_DEC,
             H5D_XFER_XFORM_DEL, H5D_XFER_XFORM_COPY, H5D_XFER_XFORM_CMP, H5D_XFER_XFORM_CLOSE) < 0)
         HGOTO_ERROR(H5E_PLIST, H5E_CANTINSERT, FAIL, "can't insert property into class")
 
@@ -860,7 +860,7 @@ H5P__dxfr_xform_cmp(const void *_xform1, const void *_xform2, size_t H5_ATTR_UNU
 
     if(*xform1) {
         HDassert(*xform2);
-    
+
         /* Get the transform expressions */
         pexp1 = H5Z_xform_extract_xform_str(*xform1);
         pexp2 = H5Z_xform_extract_xform_str(*xform2);
@@ -1964,7 +1964,7 @@ H5Pget_mpio_actual_chunk_opt_mode(hid_t plist_id, H5D_mpio_actual_chunk_opt_mode
 {
     H5P_genplist_t     *plist;
     herr_t ret_value = SUCCEED;   /* return value */
-    
+
     FUNC_ENTER_API(FAIL)
     H5TRACE2("e", "i*Do", plist_id, actual_chunk_opt_mode);
 
@@ -2000,7 +2000,7 @@ H5Pget_mpio_actual_io_mode(hid_t plist_id, H5D_mpio_actual_io_mode_t *actual_io_
 {
     H5P_genplist_t     *plist;
     herr_t ret_value = SUCCEED;   /* return value */
-    
+
     FUNC_ENTER_API(FAIL)
     H5TRACE2("e", "i*Di", plist_id, actual_io_mode);
 
@@ -2034,7 +2034,7 @@ H5Pget_mpio_no_collective_cause(hid_t plist_id, uint32_t *local_no_collective_ca
 {
     H5P_genplist_t     *plist;
     herr_t ret_value = SUCCEED;   /* return value */
-    
+
     FUNC_ENTER_API(FAIL)
     H5TRACE3("e", "i*Iu*Iu", plist_id, local_no_collective_cause,
              global_no_collective_cause);
diff --git a/src/H5Pencdec.c b/src/H5Pencdec.c
index 2a07a67..d4b6b5f 100644
--- a/src/H5Pencdec.c
+++ b/src/H5Pencdec.c
@@ -687,7 +687,7 @@ done:
         on failure.
  DESCRIPTION
      Decodes a property list from a binary buffer. The contents of the buffer
-     contain the values for the correponding properties of the plist. The decode 
+     contain the values for the correponding properties of the plist. The decode
      callback of a certain property decodes its value from the buffer and sets it
      in the property list.
  GLOBAL VARIABLES
diff --git a/src/H5Pfapl.c b/src/H5Pfapl.c
index 7866464..30b590f 100644
--- a/src/H5Pfapl.c
+++ b/src/H5Pfapl.c
@@ -5780,7 +5780,7 @@ H5P__facc_vol_cmp(const void *_info1, const void *_info2, size_t H5_ATTR_UNUSED
 
     /* Set return value */
     ret_value = cmp_value;
-    
+
 done:
     FUNC_LEAVE_NOAPI(ret_value)
 } /* end H5P__facc_vol_cmp() */
diff --git a/src/H5Pfcpl.c b/src/H5Pfcpl.c
index 56af8b1..3b0ce66 100644
--- a/src/H5Pfcpl.c
+++ b/src/H5Pfcpl.c
@@ -212,38 +212,38 @@ H5P_fcrt_reg_prop(H5P_genclass_t *pclass)
     FUNC_ENTER_NOAPI_NOINIT
 
     /* Register the user block size */
-    if(H5P__register_real(pclass, H5F_CRT_USER_BLOCK_NAME, H5F_CRT_USER_BLOCK_SIZE, &H5F_def_userblock_size_g, 
-            NULL, NULL, NULL, H5F_CRT_USER_BLOCK_ENC, H5F_CRT_USER_BLOCK_DEC, 
+    if(H5P__register_real(pclass, H5F_CRT_USER_BLOCK_NAME, H5F_CRT_USER_BLOCK_SIZE, &H5F_def_userblock_size_g,
+            NULL, NULL, NULL, H5F_CRT_USER_BLOCK_ENC, H5F_CRT_USER_BLOCK_DEC,
             NULL, NULL, NULL, NULL) < 0)
         HGOTO_ERROR(H5E_PLIST, H5E_CANTINSERT, FAIL, "can't insert property into class")
 
     /* Register the 1/2 rank for symbol table leaf nodes */
-    if(H5P__register_real(pclass, H5F_CRT_SYM_LEAF_NAME, H5F_CRT_SYM_LEAF_SIZE, &H5F_def_sym_leaf_k_g, 
-            NULL, NULL, NULL, H5F_CRT_SYM_LEAF_ENC, H5F_CRT_SYM_LEAF_DEC, 
+    if(H5P__register_real(pclass, H5F_CRT_SYM_LEAF_NAME, H5F_CRT_SYM_LEAF_SIZE, &H5F_def_sym_leaf_k_g,
+            NULL, NULL, NULL, H5F_CRT_SYM_LEAF_ENC, H5F_CRT_SYM_LEAF_DEC,
             NULL, NULL, NULL, NULL) < 0)
         HGOTO_ERROR(H5E_PLIST, H5E_CANTINSERT, FAIL, "can't insert property into class")
 
     /* Register the 1/2 rank for btree internal nodes */
-    if(H5P__register_real(pclass, H5F_CRT_BTREE_RANK_NAME, H5F_CRT_BTREE_RANK_SIZE, H5F_def_btree_k_g, 
-            NULL, NULL, NULL, H5F_CRT_BTREE_RANK_ENC, H5F_CRT_BTREE_RANK_DEC, 
+    if(H5P__register_real(pclass, H5F_CRT_BTREE_RANK_NAME, H5F_CRT_BTREE_RANK_SIZE, H5F_def_btree_k_g,
+            NULL, NULL, NULL, H5F_CRT_BTREE_RANK_ENC, H5F_CRT_BTREE_RANK_DEC,
             NULL, NULL, NULL, NULL) < 0)
         HGOTO_ERROR(H5E_PLIST, H5E_CANTINSERT, FAIL, "can't insert property into class")
 
     /* Register the byte number for an address */
-    if(H5P__register_real(pclass, H5F_CRT_ADDR_BYTE_NUM_NAME, H5F_CRT_ADDR_BYTE_NUM_SIZE, &H5F_def_sizeof_addr_g, 
-            NULL, NULL, NULL, H5F_CRT_ADDR_BYTE_NUM_ENC, H5F_CRT_ADDR_BYTE_NUM_DEC, 
+    if(H5P__register_real(pclass, H5F_CRT_ADDR_BYTE_NUM_NAME, H5F_CRT_ADDR_BYTE_NUM_SIZE, &H5F_def_sizeof_addr_g,
+            NULL, NULL, NULL, H5F_CRT_ADDR_BYTE_NUM_ENC, H5F_CRT_ADDR_BYTE_NUM_DEC,
             NULL, NULL, NULL, NULL) < 0)
         HGOTO_ERROR(H5E_PLIST, H5E_CANTINSERT, FAIL, "can't insert property into class")
 
     /* Register the byte number for object size */
-    if(H5P__register_real(pclass, H5F_CRT_OBJ_BYTE_NUM_NAME, H5F_CRT_OBJ_BYTE_NUM_SIZE, &H5F_def_sizeof_size_g, 
-            NULL, NULL, NULL, H5F_CRT_OBJ_BYTE_NUM_ENC, H5F_CRT_OBJ_BYTE_NUM_DEC, 
+    if(H5P__register_real(pclass, H5F_CRT_OBJ_BYTE_NUM_NAME, H5F_CRT_OBJ_BYTE_NUM_SIZE, &H5F_def_sizeof_size_g,
+            NULL, NULL, NULL, H5F_CRT_OBJ_BYTE_NUM_ENC, H5F_CRT_OBJ_BYTE_NUM_DEC,
             NULL, NULL, NULL, NULL) < 0)
         HGOTO_ERROR(H5E_PLIST, H5E_CANTINSERT, FAIL, "can't insert property into class")
 
     /* Register the superblock version number */
     /* (Note: this property should not have an encode/decode callback -QAK) */
-    if(H5P__register_real(pclass, H5F_CRT_SUPER_VERS_NAME, H5F_CRT_SUPER_VERS_SIZE, &H5F_def_superblock_ver_g, 
+    if(H5P__register_real(pclass, H5F_CRT_SUPER_VERS_NAME, H5F_CRT_SUPER_VERS_SIZE, &H5F_def_superblock_ver_g,
             NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL) < 0)
         HGOTO_ERROR(H5E_PLIST, H5E_CANTINSERT, FAIL, "can't insert property into class")
 
@@ -272,8 +272,8 @@ H5P_fcrt_reg_prop(H5P_genclass_t *pclass)
         HGOTO_ERROR(H5E_PLIST, H5E_CANTINSERT, FAIL, "can't insert property into class")
 
     /* Register the file space handling strategy */
-    if(H5P__register_real(pclass, H5F_CRT_FILE_SPACE_STRATEGY_NAME, H5F_CRT_FILE_SPACE_STRATEGY_SIZE, &H5F_def_file_space_strategy_g, 
-            NULL, NULL, NULL, H5F_CRT_FILE_SPACE_STRATEGY_ENC, H5F_CRT_FILE_SPACE_STRATEGY_DEC, 
+    if(H5P__register_real(pclass, H5F_CRT_FILE_SPACE_STRATEGY_NAME, H5F_CRT_FILE_SPACE_STRATEGY_SIZE, &H5F_def_file_space_strategy_g,
+            NULL, NULL, NULL, H5F_CRT_FILE_SPACE_STRATEGY_ENC, H5F_CRT_FILE_SPACE_STRATEGY_DEC,
             NULL, NULL, NULL, NULL) < 0)
         HGOTO_ERROR(H5E_PLIST, H5E_CANTINSERT, FAIL, "can't insert property into class")
 
@@ -284,8 +284,8 @@ H5P_fcrt_reg_prop(H5P_genclass_t *pclass)
         HGOTO_ERROR(H5E_PLIST, H5E_CANTINSERT, FAIL, "can't insert property into class")
 
     /* Register the free space section threshold */
-    if(H5P__register_real(pclass, H5F_CRT_FREE_SPACE_THRESHOLD_NAME, H5F_CRT_FREE_SPACE_THRESHOLD_SIZE, &H5F_def_free_space_threshold_g, 
-            NULL, NULL, NULL, H5F_CRT_FREE_SPACE_THRESHOLD_ENC, H5F_CRT_FREE_SPACE_THRESHOLD_DEC, 
+    if(H5P__register_real(pclass, H5F_CRT_FREE_SPACE_THRESHOLD_NAME, H5F_CRT_FREE_SPACE_THRESHOLD_SIZE, &H5F_def_free_space_threshold_g,
+            NULL, NULL, NULL, H5F_CRT_FREE_SPACE_THRESHOLD_ENC, H5F_CRT_FREE_SPACE_THRESHOLD_DEC,
             NULL, NULL, NULL, NULL) < 0)
         HGOTO_ERROR(H5E_PLIST, H5E_CANTINSERT, FAIL, "can't insert property into class")
 
@@ -1333,7 +1333,7 @@ done:
 /*-------------------------------------------------------------------------
  * Function:	H5Pget_file_space_strategy
  *
- * Purpose:	Retrieves the strategy, persist, and threshold that the library 
+ * Purpose:	Retrieves the strategy, persist, and threshold that the library
  *          uses in managing file space.
  *
  * Return:	Non-negative on success/Negative on failure
diff --git a/src/H5Pfmpl.c b/src/H5Pfmpl.c
index 1e39749..41ad078 100644
--- a/src/H5Pfmpl.c
+++ b/src/H5Pfmpl.c
@@ -124,7 +124,7 @@ H5P_fmnt_reg_prop(H5P_genclass_t *pclass)
     FUNC_ENTER_NOAPI_NOINIT
 
     /* Register property of whether symlinks is local to file */
-    if(H5P__register_real(pclass, H5F_MNT_SYM_LOCAL_NAME, H5F_MNT_SYM_LOCAL_SIZE, &H5F_def_local_g, 
+    if(H5P__register_real(pclass, H5F_MNT_SYM_LOCAL_NAME, H5F_MNT_SYM_LOCAL_SIZE, &H5F_def_local_g,
             NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL) < 0)
         HGOTO_ERROR(H5E_PLIST, H5E_CANTINSERT, FAIL, "can't insert property into class")
 
diff --git a/src/H5Pgcpl.c b/src/H5Pgcpl.c
index e2fdcea..03874c8 100644
--- a/src/H5Pgcpl.c
+++ b/src/H5Pgcpl.c
@@ -133,13 +133,13 @@ H5P__gcrt_reg_prop(H5P_genclass_t *pclass)
     FUNC_ENTER_STATIC
 
     /* Register group info property */
-    if(H5P__register_real(pclass, H5G_CRT_GROUP_INFO_NAME, H5G_CRT_GROUP_INFO_SIZE, &H5G_def_ginfo_g, 
+    if(H5P__register_real(pclass, H5G_CRT_GROUP_INFO_NAME, H5G_CRT_GROUP_INFO_SIZE, &H5G_def_ginfo_g,
             NULL, NULL, NULL, H5G_CRT_GROUP_INFO_ENC, H5G_CRT_GROUP_INFO_DEC,
             NULL, NULL, NULL, NULL) < 0)
         HGOTO_ERROR(H5E_PLIST, H5E_CANTINSERT, FAIL, "can't insert property into class")
 
     /* Register link info property */
-    if(H5P__register_real(pclass, H5G_CRT_LINK_INFO_NAME, H5G_CRT_LINK_INFO_SIZE, &H5G_def_linfo_g, 
+    if(H5P__register_real(pclass, H5G_CRT_LINK_INFO_NAME, H5G_CRT_LINK_INFO_SIZE, &H5G_def_linfo_g,
             NULL, NULL, NULL, H5G_CRT_LINK_INFO_ENC, H5G_CRT_LINK_INFO_DEC,
             NULL, NULL, NULL, NULL) < 0)
         HGOTO_ERROR(H5E_PLIST, H5E_CANTINSERT, FAIL, "can't insert property into class")
@@ -545,7 +545,7 @@ done:
  *
  *-------------------------------------------------------------------------
  */
-static herr_t 
+static herr_t
 H5P__gcrt_group_info_enc(const void *value, void **_pp, size_t *size)
 {
     const H5O_ginfo_t *ginfo = (const H5O_ginfo_t *)value; /* Create local aliases for values */
@@ -558,7 +558,7 @@ H5P__gcrt_group_info_enc(const void *value, void **_pp, size_t *size)
         UINT16ENCODE(*pp, ginfo->max_compact)
         UINT16ENCODE(*pp, ginfo->min_dense)
         UINT16ENCODE(*pp, ginfo->est_num_entries)
-        UINT16ENCODE(*pp, ginfo->est_name_len)      
+        UINT16ENCODE(*pp, ginfo->est_name_len)
     } /* end if */
 
     *size += sizeof(uint16_t) * 4 + sizeof(uint32_t);
@@ -582,7 +582,7 @@ H5P__gcrt_group_info_enc(const void *value, void **_pp, size_t *size)
  *
  *-------------------------------------------------------------------------
  */
-static herr_t 
+static herr_t
 H5P__gcrt_group_info_dec(const void **_pp, void *_value)
 {
     H5O_ginfo_t *ginfo = (H5O_ginfo_t *)_value;     /* Group info settings */
@@ -599,16 +599,16 @@ H5P__gcrt_group_info_dec(const void **_pp, void *_value)
     UINT16DECODE(*pp, ginfo->max_compact)
     UINT16DECODE(*pp, ginfo->min_dense)
     UINT16DECODE(*pp, ginfo->est_num_entries)
-    UINT16DECODE(*pp, ginfo->est_name_len)      
+    UINT16DECODE(*pp, ginfo->est_name_len)
 
     /* Update fields */
-    if(ginfo->max_compact != H5G_CRT_GINFO_MAX_COMPACT || 
+    if(ginfo->max_compact != H5G_CRT_GINFO_MAX_COMPACT ||
             ginfo->min_dense != H5G_CRT_GINFO_MIN_DENSE)
         ginfo->store_link_phase_change = TRUE;
     else
         ginfo->store_link_phase_change = FALSE;
 
-    if(ginfo->est_num_entries != H5G_CRT_GINFO_EST_NUM_ENTRIES || 
+    if(ginfo->est_num_entries != H5G_CRT_GINFO_EST_NUM_ENTRIES ||
             ginfo->est_name_len != H5G_CRT_GINFO_EST_NAME_LEN)
         ginfo->store_est_entry_info = TRUE;
     else
@@ -633,7 +633,7 @@ H5P__gcrt_group_info_dec(const void **_pp, void *_value)
  *
  *-------------------------------------------------------------------------
  */
-static herr_t 
+static herr_t
 H5P__gcrt_link_info_enc(const void *value, void **_pp, size_t *size)
 {
     const H5O_linfo_t *linfo = (const H5O_linfo_t *)value; /* Create local aliases for values */
@@ -675,7 +675,7 @@ H5P__gcrt_link_info_enc(const void *value, void **_pp, size_t *size)
  *
  *-------------------------------------------------------------------------
  */
-static herr_t 
+static herr_t
 H5P__gcrt_link_info_dec(const void **_pp, void *_value)
 {
     H5O_linfo_t *linfo = (H5O_linfo_t *)_value;  /* Link info settings */
diff --git a/src/H5Pint.c b/src/H5Pint.c
index 0810427..3cefb64 100644
--- a/src/H5Pint.c
+++ b/src/H5Pint.c
@@ -111,7 +111,7 @@ static H5P_genprop_t *H5P__create_prop(const char *name, size_t size, H5P_prop_w
 static H5P_genprop_t *H5P__dup_prop(H5P_genprop_t *oprop, H5P_prop_within_t type);
 static herr_t H5P__free_prop(H5P_genprop_t *prop);
 static int H5P__cmp_prop(const H5P_genprop_t *prop1, const H5P_genprop_t *prop2);
-static herr_t H5P__do_prop(H5P_genplist_t *plist, const char *name, H5P_do_plist_op_t plist_op, 
+static herr_t H5P__do_prop(H5P_genplist_t *plist, const char *name, H5P_do_plist_op_t plist_op,
     H5P_do_pclass_op_t pclass_op, void *udata);
 static int H5P__open_class_path_cb(void *_obj, hid_t H5_ATTR_UNUSED id, void *_key);
 static H5P_genprop_t *H5P__find_prop_pclass(H5P_genclass_t *pclass, const char *name);
@@ -1947,7 +1947,7 @@ done:
  PURPOSE
     Internal routine to register a new property in a property list class.
  USAGE
-    herr_t H5P__register_real(class, name, size, default, prp_create, prp_set, 
+    herr_t H5P__register_real(class, name, size, default, prp_create, prp_set,
                              prp_get, prp_close, prp_encode, prp_decode)
         H5P_genclass_t *class;  IN: Property list class to modify
         const char *name;       IN: Name of property to register
@@ -2081,7 +2081,7 @@ done:
 
         The 'encode' callback is called when a property list with this
     property is being encoded.  H5P_prp_encode_func_t is defined as:
-        typedef herr_t (*H5P_prp_encode_func_t)(void *f, size_t *size, 
+        typedef herr_t (*H5P_prp_encode_func_t)(void *f, size_t *size,
         void *value, void *plist, uint8_t **buf);
     where the parameters to the callback function are:
         void *f;            IN: A fake file structure used to encode.
@@ -2090,12 +2090,12 @@ done:
         void *plist;        IN: The property list structure.
         uint8_t **buf;      OUT: The buffer that holds the encoded property;
     The 'encode' routine returns the size needed to encode the property value
-    if the buffer passed in is NULL or the size is zero. Otherwise it encodes 
+    if the buffer passed in is NULL or the size is zero. Otherwise it encodes
     the property value into binary in buf.
 
         The 'decode' callback is called when a property list with this
     property is being decoded.  H5P_prp_encode_func_t is defined as:
-        typedef herr_t (*H5P_prp_encode_func_t)(void *f, size_t *size, 
+        typedef herr_t (*H5P_prp_encode_func_t)(void *f, size_t *size,
         void *value, void *plist, uint8_t **buf);
     where the parameters to the callback function are:
         void *f;            IN: A fake file structure used to decode.
@@ -2150,7 +2150,7 @@ H5P__register_real(H5P_genclass_t *pclass, const char *name, size_t size,
         HGOTO_ERROR(H5E_PLIST, H5E_EXISTS, FAIL, "property already exists")
 
     /* Create property object from parameters */
-    if(NULL == (new_prop = H5P__create_prop(name, size, H5P_PROP_WITHIN_CLASS, 
+    if(NULL == (new_prop = H5P__create_prop(name, size, H5P_PROP_WITHIN_CLASS,
             def_value, prp_create, prp_set, prp_get, prp_encode, prp_decode,
             prp_delete, prp_copy, prp_cmp, prp_close)))
         HGOTO_ERROR(H5E_PLIST, H5E_CANTCREATE, FAIL,"Can't create property")
@@ -2259,7 +2259,7 @@ done:
 
         The 'encode' callback is called when a property list with this
     property is being encoded.  H5P_prp_encode_func_t is defined as:
-        typedef herr_t (*H5P_prp_encode_func_t)(void *f, size_t *size, 
+        typedef herr_t (*H5P_prp_encode_func_t)(void *f, size_t *size,
         void *value, void *plist, uint8_t **buf);
     where the parameters to the callback function are:
         void *f;            IN: A fake file structure used to encode.
@@ -2268,12 +2268,12 @@ done:
         void *plist;        IN: The property list structure.
         uint8_t **buf;      OUT: The buffer that holds the encoded property;
     The 'encode' routine returns the size needed to encode the property value
-    if the buffer passed in is NULL or the size is zero. Otherwise it encodes 
+    if the buffer passed in is NULL or the size is zero. Otherwise it encodes
     the property value into binary in buf.
 
         The 'decode' callback is called when a property list with this
     property is being decoded.  H5P_prp_encode_func_t is defined as:
-        typedef herr_t (*H5P_prp_encode_func_t)(void *f, size_t *size, 
+        typedef herr_t (*H5P_prp_encode_func_t)(void *f, size_t *size,
         void *value, void *plist, uint8_t **buf);
     where the parameters to the callback function are:
         void *f;            IN: A fake file structure used to decode.
@@ -2416,7 +2416,7 @@ H5P__register(H5P_genclass_t **ppclass, const char *name, size_t size,
     } /* end if */
 
     /* Really register the property in the class */
-    if(H5P__register_real(pclass, name, size, def_value, prp_create, prp_set, prp_get, 
+    if(H5P__register_real(pclass, name, size, def_value, prp_create, prp_set, prp_get,
             prp_encode, prp_decode, prp_delete, prp_copy, prp_cmp, prp_close) < 0)
         HGOTO_ERROR(H5E_PLIST, H5E_CANTCREATE, FAIL, "can't register property")
 
@@ -2439,7 +2439,7 @@ done:
  PURPOSE
     Internal routine to insert a new property in a property list.
  USAGE
-    herr_t H5P_insert(plist, name, size, value, prp_set, prp_get, prp_close, 
+    herr_t H5P_insert(plist, name, size, value, prp_set, prp_get, prp_close,
                       prp_encode, prp_decode)
         H5P_genplist_t *plist;  IN: Property list to add property to
         const char *name;       IN: Name of property to add
@@ -2500,7 +2500,7 @@ done:
 
         The 'encode' callback is called when a property list with this
     property is being encoded.  H5P_prp_encode_func_t is defined as:
-        typedef herr_t (*H5P_prp_encode_func_t)(void *f, size_t *size, 
+        typedef herr_t (*H5P_prp_encode_func_t)(void *f, size_t *size,
         void *value, void *plist, uint8_t **buf);
     where the parameters to the callback function are:
         void *f;            IN: A fake file structure used to encode.
@@ -2509,12 +2509,12 @@ done:
         void *plist;        IN: The property list structure.
         uint8_t **buf;      OUT: The buffer that holds the encoded property;
     The 'encode' routine returns the size needed to encode the property value
-    if the buffer passed in is NULL or the size is zero. Otherwise it encodes 
+    if the buffer passed in is NULL or the size is zero. Otherwise it encodes
     the property value into binary in buf.
 
         The 'decode' callback is called when a property list with this
     property is being decoded.  H5P_prp_encode_func_t is defined as:
-        typedef herr_t (*H5P_prp_encode_func_t)(void *f, size_t *size, 
+        typedef herr_t (*H5P_prp_encode_func_t)(void *f, size_t *size,
         void *value, void *plist, uint8_t **buf);
     where the parameters to the callback function are:
         void *f;            IN: A fake file structure used to decode.
@@ -2653,8 +2653,8 @@ H5P_insert(H5P_genplist_t *plist, const char *name, size_t size,
     /* Ok to add to property list */
 
     /* Create property object from parameters */
-    if(NULL == (new_prop = H5P__create_prop(name, size, H5P_PROP_WITHIN_LIST, value, NULL, 
-            prp_set, prp_get, prp_encode, prp_decode, prp_delete, prp_copy, 
+    if(NULL == (new_prop = H5P__create_prop(name, size, H5P_PROP_WITHIN_LIST, value, NULL,
+            prp_set, prp_get, prp_encode, prp_decode, prp_delete, prp_copy,
             prp_cmp, prp_close)))
         HGOTO_ERROR(H5E_PLIST, H5E_CANTCREATE, FAIL, "Can't create property")
 
@@ -2698,7 +2698,7 @@ done:
  REVISION LOG
 --------------------------------------------------------------------------*/
 static herr_t
-H5P__do_prop(H5P_genplist_t *plist, const char *name, H5P_do_plist_op_t plist_op, 
+H5P__do_prop(H5P_genplist_t *plist, const char *name, H5P_do_plist_op_t plist_op,
     H5P_do_pclass_op_t pclass_op, void *udata)
 {
     H5P_genclass_t *tclass;     /* Temporary class pointer */
@@ -2780,7 +2780,7 @@ done:
  REVISION LOG
 --------------------------------------------------------------------------*/
 static herr_t
-H5P__poke_plist_cb(H5P_genplist_t H5_ATTR_NDEBUG_UNUSED *plist, const char H5_ATTR_NDEBUG_UNUSED *name, 
+H5P__poke_plist_cb(H5P_genplist_t H5_ATTR_NDEBUG_UNUSED *plist, const char H5_ATTR_NDEBUG_UNUSED *name,
     H5P_genprop_t *prop, void *_udata)
 {
     H5P_prop_set_ud_t *udata = (H5P_prop_set_ud_t *)_udata;    /* User data for callback */
@@ -3149,7 +3149,7 @@ done:
  COMMENTS, BUGS, ASSUMPTIONS
         The 'get' callback routine registered for this property will _NOT_ be
     called, this routine is designed for internal library use only!
-    
+
         This routine may not be called for zero-sized properties and will
     return an error in that case.
  EXAMPLES
@@ -3203,7 +3203,7 @@ done:
  COMMENTS, BUGS, ASSUMPTIONS
         The 'set' callback routine registered for this property will _NOT_ be
     called, this routine is designed for internal library use only!
-    
+
         This routine may not be called for zero-sized properties and will
     return an error in that case.
 
@@ -4396,7 +4396,7 @@ done:
  REVISION LOG
 --------------------------------------------------------------------------*/
 static herr_t
-H5P__peek_cb(H5P_genplist_t H5_ATTR_NDEBUG_UNUSED *plist, const char H5_ATTR_NDEBUG_UNUSED *name, 
+H5P__peek_cb(H5P_genplist_t H5_ATTR_NDEBUG_UNUSED *plist, const char H5_ATTR_NDEBUG_UNUSED *name,
     H5P_genprop_t *prop, void *_udata)
 {
     H5P_prop_get_ud_t *udata = (H5P_prop_get_ud_t *)_udata;    /* User data for callback */
diff --git a/src/H5Plapl.c b/src/H5Plapl.c
index 6e582fb..3d00c12 100644
--- a/src/H5Plapl.c
+++ b/src/H5Plapl.c
@@ -194,39 +194,39 @@ H5P__lacc_reg_prop(H5P_genclass_t *pclass)
     FUNC_ENTER_STATIC
 
     /* Register property for number of links traversed */
-    if(H5P__register_real(pclass, H5L_ACS_NLINKS_NAME, H5L_ACS_NLINKS_SIZE, &H5L_def_nlinks_g, 
+    if(H5P__register_real(pclass, H5L_ACS_NLINKS_NAME, H5L_ACS_NLINKS_SIZE, &H5L_def_nlinks_g,
             NULL, NULL, NULL, H5L_ACS_NLINKS_ENC, H5L_ACS_NLINKS_DEC,
             NULL, NULL, NULL, NULL) < 0)
          HGOTO_ERROR(H5E_PLIST, H5E_CANTINSERT, FAIL, "can't insert property into class")
 
     /* Register property for external link prefix */
-    if(H5P__register_real(pclass, H5L_ACS_ELINK_PREFIX_NAME, H5L_ACS_ELINK_PREFIX_SIZE, &H5L_def_elink_prefix_g, 
+    if(H5P__register_real(pclass, H5L_ACS_ELINK_PREFIX_NAME, H5L_ACS_ELINK_PREFIX_SIZE, &H5L_def_elink_prefix_g,
             NULL, H5L_ACS_ELINK_PREFIX_SET, H5L_ACS_ELINK_PREFIX_GET, H5L_ACS_ELINK_PREFIX_ENC, H5L_ACS_ELINK_PREFIX_DEC,
             H5L_ACS_ELINK_PREFIX_DEL, H5L_ACS_ELINK_PREFIX_COPY, H5L_ACS_ELINK_PREFIX_CMP, H5L_ACS_ELINK_PREFIX_CLOSE) < 0)
          HGOTO_ERROR(H5E_PLIST, H5E_CANTINSERT, FAIL, "can't insert property into class")
 
     /* Register fapl for link access */
-    if(H5P__register_real(pclass, H5L_ACS_ELINK_FAPL_NAME, H5L_ACS_ELINK_FAPL_SIZE, &H5L_def_fapl_id_g, 
+    if(H5P__register_real(pclass, H5L_ACS_ELINK_FAPL_NAME, H5L_ACS_ELINK_FAPL_SIZE, &H5L_def_fapl_id_g,
              NULL, H5L_ACS_ELINK_FAPL_SET, H5L_ACS_ELINK_FAPL_GET, H5L_ACS_ELINK_FAPL_ENC, H5L_ACS_ELINK_FAPL_DEC,
              H5L_ACS_ELINK_FAPL_DEL, H5L_ACS_ELINK_FAPL_COPY, H5L_ACS_ELINK_FAPL_CMP, H5L_ACS_ELINK_FAPL_CLOSE) < 0)
          HGOTO_ERROR(H5E_PLIST, H5E_CANTINSERT, FAIL, "can't insert property into class")
 
     /* Register property for external link file access flags */
-    if(H5P__register_real(pclass, H5L_ACS_ELINK_FLAGS_NAME, H5L_ACS_ELINK_FLAGS_SIZE, &H5L_def_elink_flags_g, 
+    if(H5P__register_real(pclass, H5L_ACS_ELINK_FLAGS_NAME, H5L_ACS_ELINK_FLAGS_SIZE, &H5L_def_elink_flags_g,
              NULL, NULL, NULL, H5L_ACS_ELINK_FLAGS_ENC, H5L_ACS_ELINK_FLAGS_DEC,
              NULL, NULL, NULL, NULL) < 0)
          HGOTO_ERROR(H5E_PLIST, H5E_CANTINSERT, FAIL, "can't insert property into class")
 
     /* Register property for external link file traversal callback */
     /* (Note: this property should not have an encode/decode callback -QAK) */
-    if(H5P__register_real(pclass, H5L_ACS_ELINK_CB_NAME, H5L_ACS_ELINK_CB_SIZE, &H5L_def_elink_cb_g, 
+    if(H5P__register_real(pclass, H5L_ACS_ELINK_CB_NAME, H5L_ACS_ELINK_CB_SIZE, &H5L_def_elink_cb_g,
              NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL) < 0)
          HGOTO_ERROR(H5E_PLIST, H5E_CANTINSERT, FAIL, "can't insert property into class")
 
 #ifdef H5_HAVE_PARALLEL
     /* Register the metadata collective read flag */
-    if(H5P__register_real(pclass, H5_COLL_MD_READ_FLAG_NAME, H5L_ACS_COLL_MD_READ_SIZE, &H5L_def_coll_md_read_g, 
-            NULL, NULL, NULL, H5L_ACS_COLL_MD_READ_ENC, H5L_ACS_COLL_MD_READ_DEC, 
+    if(H5P__register_real(pclass, H5_COLL_MD_READ_FLAG_NAME, H5L_ACS_COLL_MD_READ_SIZE, &H5L_def_coll_md_read_g,
+            NULL, NULL, NULL, H5L_ACS_COLL_MD_READ_ENC, H5L_ACS_COLL_MD_READ_DEC,
             NULL, NULL, NULL, NULL) < 0)
         HGOTO_ERROR(H5E_PLIST, H5E_CANTINSERT, FAIL, "can't insert property into class")
 #endif /* H5_HAVE_PARALLEL */
diff --git a/src/H5Plcpl.c b/src/H5Plcpl.c
index ace853a..fc1a3b9 100644
--- a/src/H5Plcpl.c
+++ b/src/H5Plcpl.c
@@ -124,7 +124,7 @@ H5P_lcrt_reg_prop(H5P_genclass_t *pclass)
     FUNC_ENTER_NOAPI(FAIL)
 
     /* Register create intermediate groups property */
-    if(H5P__register_real(pclass, H5L_CRT_INTERMEDIATE_GROUP_NAME, H5L_CRT_INTERMEDIATE_GROUP_SIZE, &H5L_def_intmd_group_g, 
+    if(H5P__register_real(pclass, H5L_CRT_INTERMEDIATE_GROUP_NAME, H5L_CRT_INTERMEDIATE_GROUP_SIZE, &H5L_def_intmd_group_g,
             NULL, NULL, NULL, H5L_CRT_INTERMEDIATE_GROUP_ENC, H5L_CRT_INTERMEDIATE_GROUP_DEC,
             NULL, NULL, NULL, NULL) < 0)
         HGOTO_ERROR(H5E_PLIST, H5E_CANTINSERT, FAIL, "can't insert property into class")
diff --git a/src/H5Pocpypl.c b/src/H5Pocpypl.c
index 2dc92f9..7390cae 100644
--- a/src/H5Pocpypl.c
+++ b/src/H5Pocpypl.c
@@ -64,7 +64,7 @@
 #define H5O_CPY_MERGE_COMM_DT_LIST_CLOSE       H5P__ocpy_merge_comm_dt_list_close
 /* Definitions for callback function when completing the search for a matching committed datatype from the committed dtype list */
 #define H5O_CPY_MCDT_SEARCH_CB_SIZE           sizeof(H5O_mcdt_cb_info_t)
-#define H5O_CPY_MCDT_SEARCH_CB_DEF            {NULL,NULL} 
+#define H5O_CPY_MCDT_SEARCH_CB_DEF            {NULL,NULL}
 
 
 /******************/
@@ -161,20 +161,20 @@ H5P__ocpy_reg_prop(H5P_genclass_t *pclass)
     FUNC_ENTER_STATIC
 
     /* Register copy options property */
-    if(H5P__register_real(pclass, H5O_CPY_OPTION_NAME, H5O_CPY_OPTION_SIZE, &H5O_def_ocpy_option_g, 
+    if(H5P__register_real(pclass, H5O_CPY_OPTION_NAME, H5O_CPY_OPTION_SIZE, &H5O_def_ocpy_option_g,
             NULL, NULL, NULL, H5O_CPY_OPTION_ENC, H5O_CPY_OPTION_DEC,
             NULL, NULL, NULL, NULL) < 0)
         HGOTO_ERROR(H5E_PLIST, H5E_CANTINSERT, FAIL, "can't insert property into class")
 
     /* Register merge named dtype list property */
-    if(H5P__register_real(pclass, H5O_CPY_MERGE_COMM_DT_LIST_NAME, H5O_CPY_MERGE_COMM_DT_LIST_SIZE, &H5O_def_merge_comm_dtype_list_g, 
+    if(H5P__register_real(pclass, H5O_CPY_MERGE_COMM_DT_LIST_NAME, H5O_CPY_MERGE_COMM_DT_LIST_SIZE, &H5O_def_merge_comm_dtype_list_g,
             NULL, H5O_CPY_MERGE_COMM_DT_LIST_SET, H5O_CPY_MERGE_COMM_DT_LIST_GET, H5O_CPY_MERGE_COMM_DT_LIST_ENC, H5O_CPY_MERGE_COMM_DT_LIST_DEC,
             H5O_CPY_MERGE_COMM_DT_LIST_DEL, H5O_CPY_MERGE_COMM_DT_LIST_COPY, H5O_CPY_MERGE_COMM_DT_LIST_CMP, H5O_CPY_MERGE_COMM_DT_LIST_CLOSE) < 0)
         HGOTO_ERROR(H5E_PLIST, H5E_CANTINSERT, FAIL, "can't insert property into class")
 
     /* Register property for callback when completing the search for a matching named datatype from the named dtype list */
     /* (Note: this property should not have an encode/decode callback -QAK) */
-    if(H5P__register_real(pclass, H5O_CPY_MCDT_SEARCH_CB_NAME, H5O_CPY_MCDT_SEARCH_CB_SIZE, &H5O_def_mcdt_cb_g, 
+    if(H5P__register_real(pclass, H5O_CPY_MCDT_SEARCH_CB_NAME, H5O_CPY_MCDT_SEARCH_CB_SIZE, &H5O_def_mcdt_cb_g,
             NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL) < 0)
         HGOTO_ERROR(H5E_PLIST, H5E_CANTINSERT, FAIL, "can't insert property into class")
 
@@ -421,7 +421,7 @@ H5P__ocpy_merge_comm_dt_list_enc(const void *value, void **_pp, size_t *size)
  *
  *-------------------------------------------------------------------------
  */
-static herr_t 
+static herr_t
 H5P__ocpy_merge_comm_dt_list_dec(const void **_pp, void *_value)
 {
     H5O_copy_dtype_merge_list_t **dt_list = (H5O_copy_dtype_merge_list_t **)_value;        /* Pointer to merge named datatype list */
@@ -439,7 +439,7 @@ H5P__ocpy_merge_comm_dt_list_dec(const void **_pp, void *_value)
 
     /* Start off with NULL (default value) */
     *dt_list = NULL;
-    
+
     /* Decode the string sequence */
     len = HDstrlen(*(const char **)pp);
     while(len > 0) {
@@ -469,7 +469,7 @@ H5P__ocpy_merge_comm_dt_list_dec(const void **_pp, void *_value)
     /* Advance past terminator for string sequence */
     *pp += 1;
 
-done: 
+done:
     if(ret_value < 0) {
         *dt_list = H5P__free_merge_comm_dtype_list(*dt_list);
         if(tmp_dt_list) {
@@ -874,7 +874,7 @@ done:
 /*-------------------------------------------------------------------------
  * Function:    H5Pget_mcdt_search_cb
  *
- * Purpose:     Retrieves the callback function and user data from the specified 
+ * Purpose:     Retrieves the callback function and user data from the specified
  *		object copy property list.
  *
  * Usage:       H5Pget_mcdt_search_cb(plist_id, H5O_mcdt_search_cb_t *func, void **op_data)
@@ -905,7 +905,7 @@ H5Pget_mcdt_search_cb(hid_t plist_id, H5O_mcdt_search_cb_t *func, void **op_data
     /* Get callback info */
     if(H5P_get(plist, H5O_CPY_MCDT_SEARCH_CB_NAME, &cb_info) < 0)
         HGOTO_ERROR(H5E_PLIST, H5E_CANTGET, FAIL, "can't get callback info")
-    
+
     if(func)
 	*func = cb_info.func;
 
diff --git a/src/H5Pstrcpl.c b/src/H5Pstrcpl.c
index 45343c6..97d6119 100644
--- a/src/H5Pstrcpl.c
+++ b/src/H5Pstrcpl.c
@@ -130,7 +130,7 @@ H5P__strcrt_reg_prop(H5P_genclass_t *pclass)
     FUNC_ENTER_STATIC
 
     /* Register character encoding */
-    if(H5P__register_real(pclass, H5P_STRCRT_CHAR_ENCODING_NAME, H5P_STRCRT_CHAR_ENCODING_SIZE, &H5P_def_char_encoding_g, 
+    if(H5P__register_real(pclass, H5P_STRCRT_CHAR_ENCODING_NAME, H5P_STRCRT_CHAR_ENCODING_SIZE, &H5P_def_char_encoding_g,
             NULL, NULL, NULL, H5P_STRCRT_CHAR_ENCODING_ENC, H5P_STRCRT_CHAR_ENCODING_DEC,
             NULL, NULL, NULL, NULL) < 0)
         HGOTO_ERROR(H5E_PLIST, H5E_CANTINSERT, FAIL, "can't insert property into class")
diff --git a/src/H5SM.c b/src/H5SM.c
index 290e575..6eea80d 100644
--- a/src/H5SM.c
+++ b/src/H5SM.c
@@ -57,7 +57,7 @@ static herr_t H5SM__create_index(H5F_t *f, H5SM_index_header_t *header);
 static herr_t H5SM__delete_index(H5F_t *f, H5SM_index_header_t *header,
     hbool_t delete_heap);
 static haddr_t H5SM__create_list(H5F_t *f, H5SM_index_header_t *header);
-static herr_t H5SM__find_in_list(const H5SM_list_t *list, const H5SM_mesg_key_t *key, 
+static herr_t H5SM__find_in_list(const H5SM_list_t *list, const H5SM_mesg_key_t *key,
     size_t *empty_pos, size_t *list_pos);
 static herr_t H5SM__convert_list_to_btree(H5F_t * f, H5SM_index_header_t * header,
     H5SM_list_t **_list, H5HF_t *fheap, H5O_t *open_oh);
diff --git a/src/H5SMcache.c b/src/H5SMcache.c
index 6d0f2b0..7f243a6 100644
--- a/src/H5SMcache.c
+++ b/src/H5SMcache.c
@@ -59,16 +59,16 @@
 static herr_t H5SM__cache_table_get_initial_load_size(void *udata, size_t *image_len);
 static htri_t H5SM__cache_table_verify_chksum(const void *image_ptr, size_t len, void *udata_ptr);
 static void *H5SM__cache_table_deserialize(const void *image, size_t len,
-    void *udata, hbool_t *dirty); 
+    void *udata, hbool_t *dirty);
 static herr_t H5SM__cache_table_image_len(const void *thing, size_t *image_len);
 static herr_t H5SM__cache_table_serialize(const H5F_t *f, void *image,
-    size_t len, void *thing); 
+    size_t len, void *thing);
 static herr_t H5SM__cache_table_free_icr(void *thing);
 
 static herr_t H5SM__cache_list_get_initial_load_size(void *udata, size_t *image_len);
 static htri_t H5SM__cache_list_verify_chksum(const void *image_ptr, size_t len, void *udata_ptr);
 static void *H5SM__cache_list_deserialize(const void *image, size_t len,
-    void *udata, hbool_t *dirty); 
+    void *udata, hbool_t *dirty);
 static herr_t H5SM__cache_list_image_len(const void *thing, size_t *image_len);
 static herr_t H5SM__cache_list_serialize(const H5F_t *f, void *image,
     size_t len, void *thing);
@@ -129,7 +129,7 @@ const H5AC_class_t H5AC_SOHM_LIST[1] = {{
 /*-------------------------------------------------------------------------
  * Function:    H5SM__cache_table_get_initial_load_size()
  *
- * Purpose:	Return the size of the master table of Shared Object Header 
+ * Purpose:	Return the size of the master table of Shared Object Header
  *		Message indexes on disk.
  *
  * Return:      Success:        SUCCEED
@@ -198,9 +198,9 @@ H5SM__cache_table_verify_chksum(const void *_image, size_t len, void H5_ATTR_UNU
 /*-------------------------------------------------------------------------
  * Function:    H5SM__cache_table_deserialize
  *
- * Purpose:	Given a buffer containing the on disk representation of the 
+ * Purpose:	Given a buffer containing the on disk representation of the
  *		master table of Shared Object Header Message indexes, deserialize
- *		the table, copy the contents into a newly allocated instance of 
+ *		the table, copy the contents into a newly allocated instance of
  *		H5SM_master_table_t, and return a pointer to the new instance.
  *
  * Return:      Success:        Pointer to in core representation
@@ -212,7 +212,7 @@ H5SM__cache_table_verify_chksum(const void *_image, size_t len, void H5_ATTR_UNU
  *-------------------------------------------------------------------------
  */
 static void *
-H5SM__cache_table_deserialize(const void *_image, size_t H5_ATTR_NDEBUG_UNUSED len, 
+H5SM__cache_table_deserialize(const void *_image, size_t H5_ATTR_NDEBUG_UNUSED len,
     void *_udata, hbool_t H5_ATTR_UNUSED *dirty)
 {
     H5F_t		   *f;                  /* File pointer -- from user data */
@@ -264,7 +264,7 @@ H5SM__cache_table_deserialize(const void *_image, size_t H5_ATTR_NDEBUG_UNUSED l
     /* Read in the index headers */
     for(u = 0; u < table->num_indexes; ++u) {
         /* Verify correct version of index list */
-        if(H5SM_LIST_VERSION != *image++) 
+        if(H5SM_LIST_VERSION != *image++)
             HGOTO_ERROR(H5E_SOHM, H5E_VERSION, NULL, "bad shared message list version number")
 
         /* Type of the index (list or B-tree) */
@@ -555,8 +555,8 @@ H5SM__cache_list_verify_chksum(const void *_image, size_t H5_ATTR_UNUSED len, vo
 /*-------------------------------------------------------------------------
  * Function:    H5SM__cache_list_deserialize
  *
- * Purpose:	Given a buffer containing the on disk image of a list of 
- *		SOHM message, deserialize the list, load it into a newly allocated 
+ * Purpose:	Given a buffer containing the on disk image of a list of
+ *		SOHM message, deserialize the list, load it into a newly allocated
  *		instance of H5SM_list_t, and return a pointer to same.
  *
  * Return:      Success:        Pointer to in core representation
@@ -568,7 +568,7 @@ H5SM__cache_list_verify_chksum(const void *_image, size_t H5_ATTR_UNUSED len, vo
  *-------------------------------------------------------------------------
  */
 static void *
-H5SM__cache_list_deserialize(const void *_image, size_t H5_ATTR_NDEBUG_UNUSED len, 
+H5SM__cache_list_deserialize(const void *_image, size_t H5_ATTR_NDEBUG_UNUSED len,
     void *_udata, hbool_t H5_ATTR_UNUSED *dirty)
 {
     H5SM_list_t          *list = NULL;     /* The SOHM list being read in */
diff --git a/src/H5Sall.c b/src/H5Sall.c
index 77fb582..8290ae2 100644
--- a/src/H5Sall.c
+++ b/src/H5Sall.c
@@ -675,7 +675,7 @@ H5S__all_deserialize(H5S_t **space, const uint8_t **p)
     HDassert(*p);
 
     /* As part of the efforts to push all selection-type specific coding
-       to the callbacks, the coding for the allocation of a null dataspace 
+       to the callbacks, the coding for the allocation of a null dataspace
        is moved from H5S_select_deserialize() in H5Sselect.c.
        This is needed for decoding virtual layout in H5O__layout_decode() */
 
diff --git a/src/H5Smpio.c b/src/H5Smpio.c
index 6397f4b..33dd492 100644
--- a/src/H5Smpio.c
+++ b/src/H5Smpio.c
@@ -899,7 +899,7 @@ if(H5DEBUG(S))
 
         /* Calculate start and extent values of this dimension */
         /* Check if value overflow to cast to type MPI_Aint */
-        if(d[i].start > LONG_MAX || offset[i] > LONG_MAX || elmt_size > LONG_MAX) 
+        if(d[i].start > LONG_MAX || offset[i] > LONG_MAX || elmt_size > LONG_MAX)
             HGOTO_ERROR(H5E_DATASET, H5E_BADVALUE, FAIL, "result overflow")
 	    start_disp = (MPI_Aint)d[i].start * (MPI_Aint)offset[i] * (MPI_Aint)elmt_size;
 
diff --git a/src/H5Spublic.h b/src/H5Spublic.h
index f7c5ae7..1ca79ea 100644
--- a/src/H5Spublic.h
+++ b/src/H5Spublic.h
@@ -47,7 +47,7 @@
 #define H5S_SEL_ITER_SHARE_WITH_DATASPACE 0x0002 /* Don't copy the dataspace
                                                  * selection when creating the
                                                  * selection iterator.
-                                                 * 
+                                                 *
                                                  * This can improve performance
                                                  * of creating the iterator, but
                                                  * the dataspace _MUST_NOT_ be
diff --git a/src/H5Sselect.c b/src/H5Sselect.c
index 13233ce..56f14ba 100644
--- a/src/H5Sselect.c
+++ b/src/H5Sselect.c
@@ -3044,7 +3044,7 @@ done:
     Retrieve a list of offset / length pairs (a list of "sequences") matching
     the selected elements for an iterator, according to the iteration order for
     the iterator.  The lengths returned are in _bytes_, not elements.
-    
+
     Note that the iteration order for "all" and "hyperslab" selections is
     row-major (i.e. "C-ordered"), but the iteration order for "point"
     selections is "in order selected", unless the H5S_SEL_ITER_GET_SEQ_LIST_SORTED
diff --git a/src/H5TS.c b/src/H5TS.c
index 98eba41..3643ed5 100644
--- a/src/H5TS.c
+++ b/src/H5TS.c
@@ -179,7 +179,7 @@ H5TS_thread_id(void)
 
     /* An ID is *not* already assigned: reuse an ID that's on the
      * free list, or else generate a new ID.
-     * 
+     *
      * Allocating memory while holding a mutex is bad form, so
      * point `tid` at `proto_tid` if we need to allocate some
      * memory.
@@ -292,7 +292,7 @@ herr_t
 H5TS_mutex_lock(H5TS_mutex_t *mutex)
 {
 #ifdef  H5_HAVE_WIN_THREADS
-    EnterCriticalSection( &mutex->CriticalSection); 
+    EnterCriticalSection( &mutex->CriticalSection);
     return 0;
 #else /* H5_HAVE_WIN_THREADS */
     herr_t ret_value = pthread_mutex_lock(&mutex->atomic_lock);
@@ -313,7 +313,7 @@ H5TS_mutex_lock(H5TS_mutex_t *mutex)
         mutex->lock_count = 1;
     }
 
-    return pthread_mutex_unlock(&mutex->atomic_lock); 
+    return pthread_mutex_unlock(&mutex->atomic_lock);
 #endif /* H5_HAVE_WIN_THREADS */
 }
 
@@ -344,7 +344,7 @@ H5TS_mutex_unlock(H5TS_mutex_t *mutex)
 #ifdef  H5_HAVE_WIN_THREADS
     /* Releases ownership of the specified critical section object. */
     LeaveCriticalSection(&mutex->CriticalSection);
-    return 0; 
+    return 0;
 #else  /* H5_HAVE_WIN_THREADS */
     herr_t ret_value = pthread_mutex_lock(&mutex->atomic_lock);
 
@@ -363,7 +363,7 @@ H5TS_mutex_unlock(H5TS_mutex_t *mutex)
             ret_value = err;
     } /* end if */
 
-    return ret_value; 
+    return ret_value;
 #endif /* H5_HAVE_WIN_THREADS */
 } /* H5TS_mutex_unlock */
 
@@ -400,15 +400,15 @@ H5TS_cancel_count_inc(void)
     return SUCCEED;
 #else /* H5_HAVE_WIN_THREADS */
     H5TS_cancel_t *cancel_counter;
-    herr_t ret_value = SUCCEED; 
+    herr_t ret_value = SUCCEED;
 
-    cancel_counter = (H5TS_cancel_t *)H5TS_get_thread_local_value(H5TS_cancel_key_g); 
+    cancel_counter = (H5TS_cancel_t *)H5TS_get_thread_local_value(H5TS_cancel_key_g);
 
     if (!cancel_counter) {
         /*
          * First time thread calls library - create new counter and associate
          * with key.
-         * 
+         *
          * Don't use H5MM calls here since the destructor has to use HDfree in
          * order to avoid codestack calls.
          */
@@ -429,7 +429,7 @@ H5TS_cancel_count_inc(void)
 
     ++cancel_counter->cancel_count;
 
-    return ret_value; 
+    return ret_value;
 #endif /* H5_HAVE_WIN_THREADS */
 }
 
@@ -459,19 +459,19 @@ H5TS_cancel_count_inc(void)
 herr_t
 H5TS_cancel_count_dec(void)
 {
-#ifdef  H5_HAVE_WIN_THREADS 
+#ifdef  H5_HAVE_WIN_THREADS
     /* unsupported; will just return 0 */
     return SUCCEED;
 #else /* H5_HAVE_WIN_THREADS */
-    register H5TS_cancel_t *cancel_counter; 
+    register H5TS_cancel_t *cancel_counter;
     herr_t ret_value = SUCCEED;
 
-    cancel_counter = (H5TS_cancel_t *)H5TS_get_thread_local_value(H5TS_cancel_key_g); 
+    cancel_counter = (H5TS_cancel_t *)H5TS_get_thread_local_value(H5TS_cancel_key_g);
 
     if (cancel_counter->cancel_count == 1)
         ret_value = pthread_setcancelstate(cancel_counter->previous_state, NULL);
 
-    --cancel_counter->cancel_count; 
+    --cancel_counter->cancel_count;
 
     return ret_value;
 #endif /* H5_HAVE_WIN_THREADS */
@@ -491,7 +491,7 @@ H5TS_cancel_count_dec(void)
  *
  *--------------------------------------------------------------------------
  */
-H5_DLL BOOL CALLBACK 
+H5_DLL BOOL CALLBACK
 H5TS_win32_process_enter(PINIT_ONCE InitOnce, PVOID Parameter, PVOID *lpContex)
 {
     BOOL ret_value = TRUE;
@@ -653,7 +653,7 @@ H5TS_create_thread(void *(*func)(void *), H5TS_attr_t *attr, void *udata)
 {
     H5TS_thread_t ret_value;
 
-#ifdef  H5_HAVE_WIN_THREADS 
+#ifdef  H5_HAVE_WIN_THREADS
 
     /* When calling C runtime functions, you should use _beginthread or
      * _beginthreadex instead of CreateThread.  Threads created with
diff --git a/src/H5Tcommit.c b/src/H5Tcommit.c
index 7d26af3..bb660c2 100644
--- a/src/H5Tcommit.c
+++ b/src/H5Tcommit.c
@@ -1084,7 +1084,7 @@ H5T_update_shared(H5T_t *dt)
 /*-------------------------------------------------------------------------
  * Function:    H5T_construct_datatype
  *
- * Purpose:     Create a Library datatype with a connector specific datatype object 
+ * Purpose:     Create a Library datatype with a connector specific datatype object
  *
  * Return:      Success:    A type structure
  *              Failure:    NULL
@@ -1156,7 +1156,7 @@ H5T_get_named_type(const H5T_t *dt)
  * Function:    H5T_get_actual_type
  *
  * Purpose:     Returns underlying native datatype created by native connector
- *              if datatype is committed, otherwise return the datatype 
+ *              if datatype is committed, otherwise return the datatype
  *              object associate with the ID.
  *
  * Return:      Success:    Pointer to the VOL-managed data for this datatype
diff --git a/src/H5Tconv.c b/src/H5Tconv.c
index 2b1283e..06eb44e 100644
--- a/src/H5Tconv.c
+++ b/src/H5Tconv.c
@@ -2157,7 +2157,7 @@ H5T__conv_struct(hid_t src_id, hid_t dst_id, H5T_cdata_t *cdata, size_t nelmts,
                 HGOTO_ERROR(H5E_DATATYPE, H5E_BADTYPE, FAIL, "not a datatype")
             if(H5T_COMPOUND != src->shared->type)
                 HGOTO_ERROR(H5E_DATATYPE, H5E_BADTYPE, FAIL, "not a H5T_COMPOUND datatype")
-            if(H5T_COMPOUND != dst->shared->type) 
+            if(H5T_COMPOUND != dst->shared->type)
                 HGOTO_ERROR(H5E_DATATYPE, H5E_BADTYPE, FAIL, "not a H5T_COMPOUND datatype")
 
             if(H5T_conv_struct_init(src, dst, cdata) < 0)
@@ -2385,7 +2385,7 @@ H5T__conv_struct_opt(hid_t src_id, hid_t dst_id, H5T_cdata_t *cdata,
                 HGOTO_ERROR(H5E_ARGS, H5E_BADTYPE, FAIL, "not a datatype")
             if(H5T_COMPOUND != src->shared->type)
                 HGOTO_ERROR(H5E_DATATYPE, H5E_BADTYPE, FAIL, "not a H5T_COMPOUND datatype")
-            if(H5T_COMPOUND != dst->shared->type) 
+            if(H5T_COMPOUND != dst->shared->type)
                 HGOTO_ERROR(H5E_DATATYPE, H5E_BADTYPE, FAIL, "not a H5T_COMPOUND datatype")
 
             /* Initialize data which is relatively constant */
@@ -2648,14 +2648,14 @@ H5T_conv_enum_init(H5T_t *src, H5T_t *dst, H5T_cdata_t *cdata)
      * that array are the index numbers in the destination type or negative
      * if the entry is unused.
      *
-     * (This optimized algorithm doesn't work when the byte orders are different.  
+     * (This optimized algorithm doesn't work when the byte orders are different.
      * The code such as "n = *((int*)(src->shared->u.enumer.value+i*src->shared->size));"
      * can change the value significantly. i.g. if the source value is big-endian 0x0000000f,
      * executing the casting on little-endian machine will get a big number 0x0f000000.
-     * Then it can't meet the condition 
+     * Then it can't meet the condition
      * "if(src->shared->u.enumer.nmembs<2 || (double)length/src->shared->u.enumer.nmembs<1.2)"
-     * Because this is the optimized code, we won't fix it. It should still work in some 
-     * situations. SLU - 2011/5/24) 
+     * Because this is the optimized code, we won't fix it. It should still work in some
+     * situations. SLU - 2011/5/24)
      */
     if(1 == src->shared->size || sizeof(short) == src->shared->size || sizeof(int) == src->shared->size) {
 	for(i = 0; i < src->shared->u.enumer.nmembs; i++) {
@@ -2763,7 +2763,7 @@ H5T__conv_enum(hid_t src_id, hid_t dst_id, H5T_cdata_t *cdata, size_t nelmts,
                 HGOTO_ERROR(H5E_DATATYPE, H5E_BADTYPE, FAIL, "not a datatype")
             if(H5T_ENUM != src->shared->type)
                 HGOTO_ERROR(H5E_DATATYPE, H5E_BADTYPE, FAIL, "not a H5T_ENUM datatype")
-            if(H5T_ENUM != dst->shared->type) 
+            if(H5T_ENUM != dst->shared->type)
                 HGOTO_ERROR(H5E_DATATYPE, H5E_BADTYPE, FAIL, "not a H5T_ENUM datatype")
 
             if(H5T_conv_enum_init(src, dst, cdata) < 0)
@@ -2790,7 +2790,7 @@ H5T__conv_enum(hid_t src_id, hid_t dst_id, H5T_cdata_t *cdata, size_t nelmts,
                 HGOTO_ERROR(H5E_ARGS, H5E_BADTYPE, FAIL, "not a datatype")
             if(H5T_ENUM != src->shared->type)
                 HGOTO_ERROR(H5E_DATATYPE, H5E_BADTYPE, FAIL, "not a H5T_ENUM datatype")
-            if(H5T_ENUM != dst->shared->type) 
+            if(H5T_ENUM != dst->shared->type)
                 HGOTO_ERROR(H5E_DATATYPE, H5E_BADTYPE, FAIL, "not a H5T_ENUM datatype")
 
             /* priv->src2dst map was computed for certain sort keys. Make sure those same
@@ -2830,10 +2830,10 @@ H5T__conv_enum(hid_t src_id, hid_t dst_id, H5T_cdata_t *cdata, size_t nelmts,
                     /* Use O(1) lookup */
                     /* (The casting won't work when the byte orders are different. i.g. if the source value
                      * is big-endian 0x0000000f, the direct casting "n = *((int*)s);" will make it a big
-                     * number 0x0f000000 on little-endian machine. But we won't fix it because it's an 
+                     * number 0x0f000000 on little-endian machine. But we won't fix it because it's an
                      * optimization code. Please also see the comment in the H5T_conv_enum_init() function.
                      * SLU - 2011/5/24)
-                     */ 
+                     */
                     if(1 == src->shared->size)
                         n = *((signed char*)s);
                     else if(sizeof(short) == src->shared->size)
@@ -2912,9 +2912,9 @@ done:
 /*-------------------------------------------------------------------------
  * Function:	H5T__conv_enum_numeric
  *
- * Purpose:	Converts enumerated data to a numeric type (integer or 
- *              floating-point number). This function is registered into 
- *              the conversion table twice in H5T_init_interface in H5T.c.  
+ * Purpose:	Converts enumerated data to a numeric type (integer or
+ *              floating-point number). This function is registered into
+ *              the conversion table twice in H5T_init_interface in H5T.c.
  *              Once for enum-integer conversion. Once for enum-float conversion.
  *
  * Return:	Success:	Non-negative
@@ -2966,7 +2966,7 @@ H5T__conv_enum_numeric(hid_t src_id, hid_t dst_id, H5T_cdata_t *cdata, size_t ne
             if(NULL == (tpath = H5T_path_find(src_parent, dst))) {
                 HGOTO_ERROR(H5E_DATASET, H5E_UNSUPPORTED, FAIL, "unable to convert between src and dest datatype")
             } else if(!H5T_path_noop(tpath)) {
-                if((src_parent_id = H5I_register(H5I_DATATYPE, H5T_copy(src_parent, H5T_COPY_ALL), FALSE)) < 0) 
+                if((src_parent_id = H5I_register(H5I_DATATYPE, H5T_copy(src_parent, H5T_COPY_ALL), FALSE)) < 0)
                     HGOTO_ERROR(H5E_DATASET, H5E_CANTREGISTER, FAIL, "unable to register types for conversion")
 
                 /* Convert the data */
@@ -3059,7 +3059,7 @@ H5T__conv_vlen(hid_t src_id, hid_t dst_id, H5T_cdata_t *cdata, size_t nelmts,
             if(H5T_VLEN != dst->shared->type)
                 HGOTO_ERROR(H5E_DATATYPE, H5E_BADTYPE, FAIL, "not a H5T_VLEN datatype")
             if(H5T_VLEN_STRING == src->shared->u.vlen.type && H5T_VLEN_STRING == dst->shared->u.vlen.type) {
-                if((H5T_CSET_ASCII == src->shared->u.vlen.cset && H5T_CSET_UTF8 == dst->shared->u.vlen.cset) 
+                if((H5T_CSET_ASCII == src->shared->u.vlen.cset && H5T_CSET_UTF8 == dst->shared->u.vlen.cset)
                         || (H5T_CSET_ASCII == dst->shared->u.vlen.cset && H5T_CSET_UTF8 == src->shared->u.vlen.cset))
                     HGOTO_ERROR(H5E_ARGS, H5E_BADVALUE, FAIL, "The library doesn't convert between strings of ASCII and UTF")
             } /* end if */
@@ -4701,7 +4701,7 @@ H5T__conv_s_s(hid_t src_id, hid_t dst_id, H5T_cdata_t *cdata, size_t nelmts,
                 HGOTO_ERROR(H5E_ARGS, H5E_BADVALUE, FAIL, "bad source character set")
             if(H5T_CSET_ASCII != dst->shared->u.atomic.u.s.cset && H5T_CSET_UTF8 != dst->shared->u.atomic.u.s.cset)
                 HGOTO_ERROR(H5E_ARGS, H5E_BADVALUE, FAIL, "bad destination character set")
-            if((H5T_CSET_ASCII == src->shared->u.atomic.u.s.cset && H5T_CSET_UTF8 == dst->shared->u.atomic.u.s.cset) 
+            if((H5T_CSET_ASCII == src->shared->u.atomic.u.s.cset && H5T_CSET_UTF8 == dst->shared->u.atomic.u.s.cset)
                     || (H5T_CSET_ASCII == dst->shared->u.atomic.u.s.cset && H5T_CSET_UTF8 == src->shared->u.atomic.u.s.cset))
                 HGOTO_ERROR(H5E_ARGS, H5E_BADVALUE, FAIL, "The library doesn't convert between strings of ASCII and UTF")
             if(src->shared->u.atomic.u.s.pad < 0 || src->shared->u.atomic.u.s.pad >= H5T_NSTR ||
diff --git a/src/H5Torder.c b/src/H5Torder.c
index 62662d6..b4babfa 100644
--- a/src/H5Torder.c
+++ b/src/H5Torder.c
@@ -86,7 +86,7 @@ static herr_t H5T_set_order(H5T_t *dtype, H5T_order_t order);
  *
  * Programmer:	Robb Matzke
  *		Wednesday, January  7, 1998
- * 
+ *
  *-------------------------------------------------------------------------
  */
 H5T_order_t
@@ -159,7 +159,7 @@ H5T_get_order(const H5T_t *dtype)
                 if(memb_order != H5T_ORDER_NONE && ret_value == H5T_ORDER_NONE)
                     ret_value = memb_order;
 
-                /* If the orders are mixed, stop the loop and report it.  
+                /* If the orders are mixed, stop the loop and report it.
                  * (H5T_ORDER_NONE is ignored)
                  */
                 if(memb_order != H5T_ORDER_NONE && ret_value != H5T_ORDER_NONE
@@ -186,7 +186,7 @@ done:
  *		2. H5T_ORDER_NONE only works for reference and fixed-length
  *			string.
  *		3. For opaque type, the order will be ignored.
- *		4. For compound type, all restrictions above apply to the 
+ *		4. For compound type, all restrictions above apply to the
  *			members.
  *
  * Return:	Non-negative on success/Negative on failure
@@ -246,12 +246,12 @@ H5T_set_order(H5T_t *dtype, H5T_order_t order)
     if(H5T_ENUM == dtype->shared->type && dtype->shared->u.enumer.nmembs > 0)
 	HGOTO_ERROR(H5E_DATATYPE, H5E_CANTSET, FAIL, "operation not allowed after enum members are defined")
 
-    /* For derived data type, defer to parent */ 
+    /* For derived data type, defer to parent */
     while(dtype->shared->parent)
         dtype = dtype->shared->parent;
 
     /* Check for setting order on inappropriate datatype */
-    if(order == H5T_ORDER_NONE && !(H5T_REFERENCE == dtype->shared->type || 
+    if(order == H5T_ORDER_NONE && !(H5T_REFERENCE == dtype->shared->type ||
             H5T_OPAQUE == dtype->shared->type || H5T_IS_FIXED_STRING(dtype->shared)))
 	HGOTO_ERROR(H5E_DATATYPE, H5E_BADVALUE, FAIL, "illegal byte order for type")
 
diff --git a/src/H5UC.c b/src/H5UC.c
index 2277818..dd61539 100644
--- a/src/H5UC.c
+++ b/src/H5UC.c
@@ -16,7 +16,7 @@
  *
  * These are used for various internal buffers which are shared.
  *
- * The module used to be H5RC, but changed to H5UC because of 
+ * The module used to be H5RC, but changed to H5UC because of
  * conflicting requirement for the use of H5RC.
  *
  */
diff --git a/src/H5UCprivate.h b/src/H5UCprivate.h
index c451f31..e4916df 100644
--- a/src/H5UCprivate.h
+++ b/src/H5UCprivate.h
@@ -13,7 +13,7 @@
 
 /*
  * This file contains private information about the H5UC module
- * The module used to be H5RC, but changed to H5UC because of 
+ * The module used to be H5RC, but changed to H5UC because of
  * conflicting requirement for the use of H5RC.
  */
 
diff --git a/src/H5VLnative_attr.c b/src/H5VLnative_attr.c
index 8072cd5..1798a0e 100644
--- a/src/H5VLnative_attr.c
+++ b/src/H5VLnative_attr.c
@@ -49,7 +49,7 @@ H5VL__native_attr_create(void *obj, const H5VL_loc_params_t *loc_params, const c
 {
     H5G_loc_t       loc;                /* Object location */
     H5G_loc_t       obj_loc;            /* Location used to open group */
-    hbool_t         loc_found = FALSE;  
+    hbool_t         loc_found = FALSE;
     H5T_t           *type, *dt;         /* Datatype to use for attribute */
     H5S_t           *space;             /* Dataspace to use for attribute */
     H5A_t           *attr = NULL;
@@ -89,7 +89,7 @@ H5VL__native_attr_create(void *obj, const H5VL_loc_params_t *loc_params, const c
 done:
     /* Release resources */
     if(loc_found && H5G_loc_free(&obj_loc) < 0)
-        HDONE_ERROR(H5E_ATTR, H5E_CANTRELEASE, NULL, "can't free location") 
+        HDONE_ERROR(H5E_ATTR, H5E_CANTRELEASE, NULL, "can't free location")
 
    FUNC_LEAVE_NOAPI(ret_value)
 } /* end H5VL__native_attr_create() */
@@ -106,7 +106,7 @@ done:
  *-------------------------------------------------------------------------
  */
 void *
-H5VL__native_attr_open(void *obj, const H5VL_loc_params_t *loc_params, const char *attr_name, 
+H5VL__native_attr_open(void *obj, const H5VL_loc_params_t *loc_params, const char *attr_name,
     hid_t H5_ATTR_UNUSED aapl_id, hid_t H5_ATTR_UNUSED dxpl_id, void H5_ATTR_UNUSED **req)
 {
     H5G_loc_t    loc;             /* Object location */
@@ -134,9 +134,9 @@ H5VL__native_attr_open(void *obj, const H5VL_loc_params_t *loc_params, const cha
     else if(loc_params->type == H5VL_OBJECT_BY_IDX) {
         /* H5Aopen_by_idx */
         /* Open the attribute in the object header */
-        if(NULL == (attr = H5A__open_by_idx(&loc, loc_params->loc_data.loc_by_idx.name, 
-                                           loc_params->loc_data.loc_by_idx.idx_type, 
-                                           loc_params->loc_data.loc_by_idx.order, 
+        if(NULL == (attr = H5A__open_by_idx(&loc, loc_params->loc_data.loc_by_idx.name,
+                                           loc_params->loc_data.loc_by_idx.idx_type,
+                                           loc_params->loc_data.loc_by_idx.order,
                                            loc_params->loc_data.loc_by_idx.n)))
             HGOTO_ERROR(H5E_ATTR, H5E_CANTOPENOBJ, NULL, "unable to open attribute")
     } /* end else-if */
@@ -279,15 +279,15 @@ H5VL__native_attr_get(void *obj, H5VL_attr_get_t get_type,
                 }
                 else if(H5VL_OBJECT_BY_IDX == loc_params->type) {
                     H5G_loc_t loc;
-                    
+
                     /* check arguments */
                     if(H5G_loc_real(obj, loc_params->obj_type, &loc) < 0)
                         HGOTO_ERROR(H5E_ARGS, H5E_BADTYPE, FAIL, "not a file or file object")
 
                     /* Open the attribute on the object header */
-                    if(NULL == (attr = H5A__open_by_idx(&loc, loc_params->loc_data.loc_by_idx.name, 
-                                                       loc_params->loc_data.loc_by_idx.idx_type, 
-                                                       loc_params->loc_data.loc_by_idx.order, 
+                    if(NULL == (attr = H5A__open_by_idx(&loc, loc_params->loc_data.loc_by_idx.name,
+                                                       loc_params->loc_data.loc_by_idx.idx_type,
+                                                       loc_params->loc_data.loc_by_idx.order,
                                                        loc_params->loc_data.loc_by_idx.n)))
                         HGOTO_ERROR(H5E_ATTR, H5E_CANTOPENOBJ, FAIL, "can't open attribute")
 
@@ -326,7 +326,7 @@ H5VL__native_attr_get(void *obj, H5VL_attr_get_t get_type,
                 else if(H5VL_OBJECT_BY_NAME == loc_params->type) {
                     char *attr_name = HDva_arg(arguments, char *);
                     H5G_loc_t loc;
-                    
+
                     /* check arguments */
                     if(H5G_loc_real(obj, loc_params->obj_type, &loc) < 0)
                         HGOTO_ERROR(H5E_ARGS, H5E_BADTYPE, FAIL, "not a file or file object")
@@ -345,15 +345,15 @@ H5VL__native_attr_get(void *obj, H5VL_attr_get_t get_type,
                 }
                 else if(H5VL_OBJECT_BY_IDX == loc_params->type) {
                     H5G_loc_t loc;
-                    
+
                     /* check arguments */
                     if(H5G_loc_real(obj, loc_params->obj_type, &loc) < 0)
                         HGOTO_ERROR(H5E_ARGS, H5E_BADTYPE, FAIL, "not a file or file object")
 
                     /* Open the attribute on the object header */
-                    if(NULL == (attr = H5A__open_by_idx(&loc, loc_params->loc_data.loc_by_idx.name, 
-                                                       loc_params->loc_data.loc_by_idx.idx_type, 
-                                                       loc_params->loc_data.loc_by_idx.order, 
+                    if(NULL == (attr = H5A__open_by_idx(&loc, loc_params->loc_data.loc_by_idx.name,
+                                                       loc_params->loc_data.loc_by_idx.idx_type,
+                                                       loc_params->loc_data.loc_by_idx.order,
                                                        loc_params->loc_data.loc_by_idx.n)))
                         HGOTO_ERROR(H5E_ATTR, H5E_CANTOPENOBJ, FAIL, "can't open attribute")
 
@@ -400,7 +400,7 @@ done:
  *-------------------------------------------------------------------------
  */
 herr_t
-H5VL__native_attr_specific(void *obj, const H5VL_loc_params_t *loc_params, H5VL_attr_specific_t specific_type, 
+H5VL__native_attr_specific(void *obj, const H5VL_loc_params_t *loc_params, H5VL_attr_specific_t specific_type,
     hid_t H5_ATTR_UNUSED dxpl_id, void H5_ATTR_UNUSED **req, va_list arguments)
 {
     H5G_loc_t   loc;
diff --git a/src/H5VLnative_dataset.c b/src/H5VLnative_dataset.c
index 8660e80..3f62e00 100644
--- a/src/H5VLnative_dataset.c
+++ b/src/H5VLnative_dataset.c
@@ -108,7 +108,7 @@ done:
  *-------------------------------------------------------------------------
  */
 void *
-H5VL__native_dataset_open(void *obj, const H5VL_loc_params_t *loc_params, const char *name, 
+H5VL__native_dataset_open(void *obj, const H5VL_loc_params_t *loc_params, const char *name,
     hid_t dapl_id, hid_t H5_ATTR_UNUSED dxpl_id, void H5_ATTR_UNUSED **req)
 {
     H5D_t       *dset = NULL;
@@ -316,7 +316,7 @@ done:
  *-------------------------------------------------------------------------
  */
 herr_t
-H5VL__native_dataset_specific(void *obj, H5VL_dataset_specific_t specific_type, 
+H5VL__native_dataset_specific(void *obj, H5VL_dataset_specific_t specific_type,
     hid_t H5_ATTR_UNUSED dxpl_id, void H5_ATTR_UNUSED **req, va_list arguments)
 {
     H5D_t       *dset = (H5D_t *)obj;
@@ -328,7 +328,7 @@ H5VL__native_dataset_specific(void *obj, H5VL_dataset_specific_t specific_type,
         /* H5Dspecific_space */
         case H5VL_DATASET_SET_EXTENT:
             { /* H5Dset_extent (H5Dextend - deprecated) */
-                const hsize_t *size = HDva_arg(arguments, const hsize_t *); 
+                const hsize_t *size = HDva_arg(arguments, const hsize_t *);
 
                 if(H5D__set_extent(dset, size) < 0)
                     HGOTO_ERROR(H5E_DATASET, H5E_CANTINIT, FAIL, "unable to set extent of dataset")
diff --git a/src/H5VLnative_datatype.c b/src/H5VLnative_datatype.c
index 3c9463d..1e9d739 100644
--- a/src/H5VLnative_datatype.c
+++ b/src/H5VLnative_datatype.c
@@ -112,7 +112,7 @@ done:
  *-------------------------------------------------------------------------
  */
 void *
-H5VL__native_datatype_open(void *obj, const H5VL_loc_params_t *loc_params, const char *name, 
+H5VL__native_datatype_open(void *obj, const H5VL_loc_params_t *loc_params, const char *name,
     hid_t H5_ATTR_UNUSED tapl_id, hid_t H5_ATTR_UNUSED dxpl_id, void H5_ATTR_UNUSED **req)
 {
     H5T_t       *type = NULL;           /* Datatype opened in file */
@@ -147,7 +147,7 @@ done:
  *-------------------------------------------------------------------------
  */
 herr_t
-H5VL__native_datatype_get(void *obj, H5VL_datatype_get_t get_type, 
+H5VL__native_datatype_get(void *obj, H5VL_datatype_get_t get_type,
     hid_t H5_ATTR_UNUSED dxpl_id, void H5_ATTR_UNUSED **req, va_list arguments)
 {
     H5T_t       *dt = (H5T_t *)obj;
@@ -199,7 +199,7 @@ done:
  *-------------------------------------------------------------------------
  */
 herr_t
-H5VL__native_datatype_specific(void *obj, H5VL_datatype_specific_t specific_type, 
+H5VL__native_datatype_specific(void *obj, H5VL_datatype_specific_t specific_type,
                              hid_t H5_ATTR_UNUSED dxpl_id, void H5_ATTR_UNUSED **req, va_list arguments)
 {
     H5T_t       *dt = (H5T_t *)obj;
diff --git a/src/H5VLnative_file.c b/src/H5VLnative_file.c
index 1f213dd..5275898 100644
--- a/src/H5VLnative_file.c
+++ b/src/H5VLnative_file.c
@@ -44,7 +44,7 @@
  *-------------------------------------------------------------------------
  */
 void *
-H5VL__native_file_create(const char *name, unsigned flags, hid_t fcpl_id, hid_t fapl_id, 
+H5VL__native_file_create(const char *name, unsigned flags, hid_t fcpl_id, hid_t fapl_id,
     hid_t H5_ATTR_UNUSED dxpl_id, void H5_ATTR_UNUSED **req)
 {
     H5F_t *new_file = NULL;
@@ -60,7 +60,7 @@ H5VL__native_file_create(const char *name, unsigned flags, hid_t fcpl_id, hid_t
         flags |= H5F_ACC_EXCL;              /* default */
     flags |= H5F_ACC_RDWR | H5F_ACC_CREAT;
 
-    /* Create the file */ 
+    /* Create the file */
     if(NULL == (new_file = H5F_open(name, flags, fcpl_id, fapl_id)))
         HGOTO_ERROR(H5E_FILE, H5E_CANTOPENFILE, NULL, "unable to create file")
     new_file->id_exists = TRUE;
@@ -68,7 +68,7 @@ H5VL__native_file_create(const char *name, unsigned flags, hid_t fcpl_id, hid_t
     ret_value = (void *)new_file;
 
 done:
-    if(NULL == ret_value && new_file) 
+    if(NULL == ret_value && new_file)
         if(H5F__close(new_file) < 0)
             HDONE_ERROR(H5E_FILE, H5E_CANTCLOSEFILE, NULL, "problems closing file")
 
@@ -95,7 +95,7 @@ H5VL__native_file_open(const char *name, unsigned flags, hid_t fapl_id,
 
     FUNC_ENTER_PACKAGE
 
-    /* Open the file */ 
+    /* Open the file */
     if(NULL == (new_file = H5F_open(name, flags, H5P_FILE_CREATE_DEFAULT, fapl_id)))
         HGOTO_ERROR(H5E_FILE, H5E_CANTOPENFILE, NULL, "unable to open file")
     new_file->id_exists = TRUE;
@@ -561,7 +561,7 @@ H5VL__native_file_optional(void *obj, H5VL_file_optional_t optional_type,
                 uint32_t cur_num_entries;
 
                 /* Go get the size data */
-                if(H5AC_get_cache_size(f->shared->cache, max_size_ptr, min_clean_size_ptr, 
+                if(H5AC_get_cache_size(f->shared->cache, max_size_ptr, min_clean_size_ptr,
                                        cur_size_ptr, &cur_num_entries) < 0)
                     HGOTO_ERROR(H5E_CACHE, H5E_SYSTEM, FAIL, "H5AC_get_cache_size() failed.")
 
diff --git a/src/H5VLnative_group.c b/src/H5VLnative_group.c
index 236ee9d..cca5c55 100644
--- a/src/H5VLnative_group.c
+++ b/src/H5VLnative_group.c
@@ -65,7 +65,7 @@ H5VL__native_group_create(void *obj, const H5VL_loc_params_t *loc_params, const
 
         /* Create the new group & get its ID */
         if(NULL == (grp = H5G__create(loc.oloc->file, &gcrt_info)))
-            HGOTO_ERROR(H5E_SYM, H5E_CANTINIT, NULL, "unable to create group")            
+            HGOTO_ERROR(H5E_SYM, H5E_CANTINIT, NULL, "unable to create group")
     } /* end if */
     /* otherwise it's from H5Gcreate */
     else {
@@ -107,7 +107,7 @@ done:
  *-------------------------------------------------------------------------
  */
 void *
-H5VL__native_group_open(void *obj, const H5VL_loc_params_t *loc_params, const char *name, 
+H5VL__native_group_open(void *obj, const H5VL_loc_params_t *loc_params, const char *name,
     hid_t H5_ATTR_UNUSED gapl_id, hid_t H5_ATTR_UNUSED dxpl_id, void H5_ATTR_UNUSED **req)
 {
     H5G_loc_t       loc;                /* Location to open group   */
@@ -216,7 +216,7 @@ done:
  *-------------------------------------------------------------------------
  */
 herr_t
-H5VL__native_group_specific(void *obj, H5VL_group_specific_t specific_type, 
+H5VL__native_group_specific(void *obj, H5VL_group_specific_t specific_type,
                              hid_t H5_ATTR_UNUSED dxpl_id, void H5_ATTR_UNUSED **req, va_list arguments)
 {
     H5G_t       *grp = (H5G_t *)obj;
diff --git a/src/H5VLnative_link.c b/src/H5VLnative_link.c
index 051de19..ceb8d61 100644
--- a/src/H5VLnative_link.c
+++ b/src/H5VLnative_link.c
@@ -75,7 +75,7 @@ H5VL__native_link_create(H5VL_link_create_type_t create_type, void *obj,
                         HGOTO_ERROR(H5E_ARGS, H5E_BADVALUE, FAIL, "source and destination should be in the same file.")
 
                     /* Create the link */
-                    if((ret_value = H5L_create_hard(cur_loc_p, cur_params->loc_data.loc_by_name.name, 
+                    if((ret_value = H5L_create_hard(cur_loc_p, cur_params->loc_data.loc_by_name.name,
                                                     link_loc_p, loc_params->loc_data.loc_by_name.name, lcpl_id)) < 0)
                         HGOTO_ERROR(H5E_LINK, H5E_CANTINIT, FAIL, "unable to create link")
                 } /* end if */
@@ -136,7 +136,7 @@ done:
  *-------------------------------------------------------------------------
  */
 herr_t
-H5VL__native_link_copy(void *src_obj, const H5VL_loc_params_t *loc_params1, 
+H5VL__native_link_copy(void *src_obj, const H5VL_loc_params_t *loc_params1,
     void *dst_obj, const H5VL_loc_params_t *loc_params2, hid_t lcpl_id,
     hid_t H5_ATTR_UNUSED lapl_id, hid_t H5_ATTR_UNUSED dxpl_id,
     void H5_ATTR_UNUSED **req)
@@ -161,8 +161,8 @@ H5VL__native_link_copy(void *src_obj, const H5VL_loc_params_t *loc_params1,
         dst_loc_p = src_loc_p;
 
     /* Copy the link */
-    if(H5L_move(src_loc_p, loc_params1->loc_data.loc_by_name.name, 
-                dst_loc_p, loc_params2->loc_data.loc_by_name.name, 
+    if(H5L_move(src_loc_p, loc_params1->loc_data.loc_by_name.name,
+                dst_loc_p, loc_params2->loc_data.loc_by_name.name,
                 TRUE, lcpl_id) < 0)
         HGOTO_ERROR(H5E_LINK, H5E_CANTCOPY, FAIL, "unable to copy link")
 
@@ -181,7 +181,7 @@ done:
  *-------------------------------------------------------------------------
  */
 herr_t
-H5VL__native_link_move(void *src_obj, const H5VL_loc_params_t *loc_params1, 
+H5VL__native_link_move(void *src_obj, const H5VL_loc_params_t *loc_params1,
     void *dst_obj, const H5VL_loc_params_t *loc_params2, hid_t lcpl_id,
     hid_t H5_ATTR_UNUSED lapl_id, hid_t H5_ATTR_UNUSED dxpl_id,
     void H5_ATTR_UNUSED **req)
@@ -206,8 +206,8 @@ H5VL__native_link_move(void *src_obj, const H5VL_loc_params_t *loc_params1,
         dst_loc_p = src_loc_p;
 
     /* Move the link */
-    if(H5L_move(src_loc_p, loc_params1->loc_data.loc_by_name.name, 
-                dst_loc_p, loc_params2->loc_data.loc_by_name.name, 
+    if(H5L_move(src_loc_p, loc_params1->loc_data.loc_by_name.name,
+                dst_loc_p, loc_params2->loc_data.loc_by_name.name,
                 FALSE, lcpl_id) < 0)
         HGOTO_ERROR(H5E_LINK, H5E_CANTMOVE, FAIL, "unable to move link")
 
@@ -226,7 +226,7 @@ done:
  *-------------------------------------------------------------------------
  */
 herr_t
-H5VL__native_link_get(void *obj, const H5VL_loc_params_t *loc_params, H5VL_link_get_t get_type, 
+H5VL__native_link_get(void *obj, const H5VL_loc_params_t *loc_params, H5VL_link_get_t get_type,
     hid_t H5_ATTR_UNUSED dxpl_id, void H5_ATTR_UNUSED **req, va_list arguments)
 {
     H5G_loc_t   loc;
@@ -289,7 +289,7 @@ H5VL__native_link_get(void *obj, const H5VL_loc_params_t *loc_params, H5VL_link_
 
                     if(H5L_get_val_by_idx(&loc, loc_params->loc_data.loc_by_idx.name, loc_params->loc_data.loc_by_idx.idx_type,
                             loc_params->loc_data.loc_by_idx.order, loc_params->loc_data.loc_by_idx.n, buf, size) < 0)
-                        HGOTO_ERROR(H5E_LINK, H5E_NOTFOUND, FAIL, "unable to get link val")                    
+                        HGOTO_ERROR(H5E_LINK, H5E_NOTFOUND, FAIL, "unable to get link val")
                 }
                 else
                     HGOTO_ERROR(H5E_LINK, H5E_NOTFOUND, FAIL, "unable to get link val")
@@ -316,7 +316,7 @@ done:
  *-------------------------------------------------------------------------
  */
 herr_t
-H5VL__native_link_specific(void *obj, const H5VL_loc_params_t *loc_params, H5VL_link_specific_t specific_type, 
+H5VL__native_link_specific(void *obj, const H5VL_loc_params_t *loc_params, H5VL_link_specific_t specific_type,
     hid_t H5_ATTR_UNUSED dxpl_id, void H5_ATTR_UNUSED **req, va_list arguments)
 {
     herr_t      ret_value = SUCCEED;    /* Return value */
diff --git a/src/H5VLnative_object.c b/src/H5VLnative_object.c
index 3a29b6c..8f60ac4 100644
--- a/src/H5VLnative_object.c
+++ b/src/H5VLnative_object.c
@@ -41,7 +41,7 @@
  *-------------------------------------------------------------------------
  */
 void *
-H5VL__native_object_open(void *obj, const H5VL_loc_params_t *loc_params, H5I_type_t *opened_type, 
+H5VL__native_object_open(void *obj, const H5VL_loc_params_t *loc_params, H5I_type_t *opened_type,
     hid_t H5_ATTR_UNUSED dxpl_id, void H5_ATTR_UNUSED **req)
 {
     H5G_loc_t   loc;
@@ -104,15 +104,15 @@ done:
  *
  *-------------------------------------------------------------------------
  */
-herr_t 
-H5VL__native_object_copy(void *src_obj, const H5VL_loc_params_t *loc_params1, const char *src_name, 
-    void *dst_obj, const H5VL_loc_params_t *loc_params2, const char *dst_name, 
+herr_t
+H5VL__native_object_copy(void *src_obj, const H5VL_loc_params_t *loc_params1, const char *src_name,
+    void *dst_obj, const H5VL_loc_params_t *loc_params2, const char *dst_name,
     hid_t ocpypl_id, hid_t lcpl_id, hid_t H5_ATTR_UNUSED dxpl_id, void H5_ATTR_UNUSED **req)
 {
     H5G_loc_t   src_loc;                /* Source object group location */
     H5G_loc_t   dst_loc;                /* Destination group location */
     herr_t      ret_value = FAIL;
-    
+
     FUNC_ENTER_PACKAGE
 
     /* get location for objects */
@@ -123,7 +123,7 @@ H5VL__native_object_copy(void *src_obj, const H5VL_loc_params_t *loc_params1, co
 
     /* Copy the object */
     if((ret_value = H5O_copy(&src_loc, src_name, &dst_loc, dst_name, ocpypl_id, lcpl_id)) < 0)
-        HGOTO_ERROR(H5E_SYM, H5E_CANTCOPY, FAIL, "unable to copy object")    
+        HGOTO_ERROR(H5E_SYM, H5E_CANTCOPY, FAIL, "unable to copy object")
 
 done:
     FUNC_LEAVE_NOAPI(ret_value)
@@ -140,7 +140,7 @@ done:
  *-------------------------------------------------------------------------
  */
 herr_t
-H5VL__native_object_get(void *obj, const H5VL_loc_params_t *loc_params, H5VL_object_get_t get_type, 
+H5VL__native_object_get(void *obj, const H5VL_loc_params_t *loc_params, H5VL_object_get_t get_type,
     hid_t H5_ATTR_UNUSED dxpl_id, void H5_ATTR_UNUSED **req, va_list arguments)
 {
     herr_t      ret_value = SUCCEED;    /* Return value */
@@ -300,7 +300,7 @@ done:
  *-------------------------------------------------------------------------
  */
 herr_t
-H5VL__native_object_specific(void *obj, const H5VL_loc_params_t *loc_params, H5VL_object_specific_t specific_type, 
+H5VL__native_object_specific(void *obj, const H5VL_loc_params_t *loc_params, H5VL_object_specific_t specific_type,
     hid_t H5_ATTR_UNUSED dxpl_id, void H5_ATTR_UNUSED **req, va_list arguments)
 {
     H5G_loc_t    loc;
@@ -579,7 +579,7 @@ H5VL__native_object_optional(void *obj, H5VL_object_optional_t optional_type,
             }
 
         default:
-            HGOTO_ERROR(H5E_VOL, H5E_CANTGET, FAIL, "can't perform this operation on object");       
+            HGOTO_ERROR(H5E_VOL, H5E_CANTGET, FAIL, "can't perform this operation on object");
     } /* end switch */
 
 done:
diff --git a/src/H5VM.c b/src/H5VM.c
index f78da96..d12bea6 100644
--- a/src/H5VM.c
+++ b/src/H5VM.c
@@ -1227,7 +1227,7 @@ H5VM_chunk_index(unsigned ndims, const hsize_t *coord, const uint32_t *chunk,
 
     /* Defer to H5VM_chunk_index_scaled */
     chunk_idx = H5VM_chunk_index_scaled(ndims, coord, chunk, down_nchunks, scaled_coord);
-    
+
     FUNC_LEAVE_NOAPI(chunk_idx)
 } /* end H5VM_chunk_index() */
 
diff --git a/src/H5Zdeflate.c b/src/H5Zdeflate.c
index 34fdfec..6d7b87e 100644
--- a/src/H5Zdeflate.c
+++ b/src/H5Zdeflate.c
@@ -26,7 +26,7 @@
 
 #ifdef H5_HAVE_FILTER_DEFLATE
 
-#if defined(H5_HAVE_ZLIB_H) && !defined(H5_ZLIB_HEADER) 
+#if defined(H5_HAVE_ZLIB_H) && !defined(H5_ZLIB_HEADER)
 # define H5_ZLIB_HEADER "zlib.h"
 #endif
 #if defined(H5_ZLIB_HEADER)
diff --git a/src/H5Znbit.c b/src/H5Znbit.c
index 2f79725..8c0e876 100644
--- a/src/H5Znbit.c
+++ b/src/H5Znbit.c
@@ -751,7 +751,7 @@ H5Z_set_parms_compound(const H5T_t *type, unsigned *cd_values_index,
                     H5_CHECK_OVERFLOW(dtype_member_offset, size_t, unsigned);
                     H5_CHECK_OVERFLOW(dtype_next_member_offset, size_t, unsigned);
                     cd_values[(*cd_values_index)++] = (unsigned)dtype_next_member_offset - (unsigned)dtype_member_offset;
-                } 
+                }
                 break;
 
             case H5T_TIME:
diff --git a/src/H5Ztrans.c b/src/H5Ztrans.c
index 6d07513..dfc984a 100644
--- a/src/H5Ztrans.c
+++ b/src/H5Ztrans.c
@@ -105,10 +105,10 @@ static void H5Z_XFORM_DEBUG(H5Z_node *tree);
 static void H5Z_print(H5Z_node *tree, FILE *stream);
 #endif  /* H5Z_XFORM_DEBUG */
 
-/* PGCC (11.8-0) has trouble with the command *p++ = *p OP tree_val. It increments P first before 
+/* PGCC (11.8-0) has trouble with the command *p++ = *p OP tree_val. It increments P first before
  * doing the operation.  So I break down the command into two lines:
  *     *p = *p OP tree_val; p++;
- * Actually, the behavior of *p++ = *p OP tree_val is undefined. (SLU - 2012/3/19) 
+ * Actually, the behavior of *p++ = *p OP tree_val is undefined. (SLU - 2012/3/19)
  */
 #define H5Z_XFORM_DO_OP1(RESL,RESR,TYPE,OP,SIZE)                            \
 {   								  	    \
@@ -328,9 +328,9 @@ static void H5Z_print(H5Z_node *tree, FILE *stream);
     H5VM_array_fill(array, &val, sizeof(TYPE), (SIZE));                                             \
 }
 
-/* The difference of this macro from H5Z_XFORM_DO_OP3 is that it handles the operations when the left operand is empty, like -x or +x.  
- * The reason that it's separated from H5Z_XFORM_DO_OP3 is because compilers don't accept operations like *x or /x.  So in H5Z_do_op, 
- * these two macros are called in different ways. (SLU 2012/3/20) 
+/* The difference of this macro from H5Z_XFORM_DO_OP3 is that it handles the operations when the left operand is empty, like -x or +x.
+ * The reason that it's separated from H5Z_XFORM_DO_OP3 is because compilers don't accept operations like *x or /x.  So in H5Z_do_op,
+ * these two macros are called in different ways. (SLU 2012/3/20)
  */
 #define H5Z_XFORM_DO_OP6(OP)                                                                                                                    \
 {                                                                                                                                               \
@@ -1229,15 +1229,15 @@ H5Z_xform_find_type(const H5T_t* type)
     HDassert(type);
 
     /* Check for SHORT type */
-    if((tmp = (H5T_t *)H5I_object(H5T_NATIVE_SHORT)) 
+    if((tmp = (H5T_t *)H5I_object(H5T_NATIVE_SHORT))
             && 0 == H5T_cmp(type, tmp, FALSE))
 	HGOTO_DONE(H5T_NATIVE_SHORT)
     /* Check for INT type */
-    else if((tmp = (H5T_t *)H5I_object(H5T_NATIVE_INT)) 
+    else if((tmp = (H5T_t *)H5I_object(H5T_NATIVE_INT))
             && 0 == H5T_cmp(type, tmp, FALSE))
         HGOTO_DONE(H5T_NATIVE_INT)
     /* Check for LONG type */
-    else if((tmp = (H5T_t *)H5I_object(H5T_NATIVE_LONG)) 
+    else if((tmp = (H5T_t *)H5I_object(H5T_NATIVE_LONG))
             && 0 == H5T_cmp(type, tmp, FALSE))
 	HGOTO_DONE(H5T_NATIVE_LONG)
     /* Check for LONGLONG type */
@@ -1370,7 +1370,7 @@ done:
 
 /*-------------------------------------------------------------------------
  * Function:    H5Z_op_is_numbs
- * Purpose:     Internal function to facilitate the condition check in 
+ * Purpose:     Internal function to facilitate the condition check in
  *              H5Z_xform_reduce_tree to reduce the bulkiness of the code.
  * Return:      TRUE or FALSE
  * Programmer:  Raymond Lu
@@ -1397,7 +1397,7 @@ H5Z_op_is_numbs(H5Z_node* _tree)
 
 /*-------------------------------------------------------------------------
  * Function:    H5Z_op_is_numbs2
- * Purpose:     Internal function to facilitate the condition check in 
+ * Purpose:     Internal function to facilitate the condition check in
  *              H5Z_xform_reduce_tree to reduce the bulkiness of the code.
  *              The difference from H5Z_op_is_numbs is that the left child
  *              can be empty, like -x or +x.
diff --git a/src/H5mpi.c b/src/H5mpi.c
index 4e1bc95..9c72fb0 100644
--- a/src/H5mpi.c
+++ b/src/H5mpi.c
@@ -124,7 +124,7 @@ H5_mpi_comm_dup(MPI_Comm comm, MPI_Comm *comm_new)
          */
         if (MPI_SUCCESS != (mpi_code = MPI_Comm_set_errhandler(comm_dup, MPI_ERRORS_RETURN)))
             HMPI_GOTO_ERROR(FAIL, "MPI_Errhandler_set failed", mpi_code)
- 
+
     }
 
     /* Copy the new communicator to the return argument */
@@ -138,7 +138,7 @@ done:
     }
 
     FUNC_LEAVE_NOAPI(ret_value)
-} /* end H5_mpi_comm_dup() */ 
+} /* end H5_mpi_comm_dup() */
 
 
 /*-------------------------------------------------------------------------
@@ -191,7 +191,7 @@ done:
     }
 
     FUNC_LEAVE_NOAPI(ret_value)
-} /* end H5_mpi_info_dup() */ 
+} /* end H5_mpi_info_dup() */
 
 
 /*-------------------------------------------------------------------------
diff --git a/src/H5public.h b/src/H5public.h
index f592ab9..0fd9f3b 100644
--- a/src/H5public.h
+++ b/src/H5public.h
@@ -415,5 +415,5 @@ H5_DLL void *H5resize_memory(void *mem, size_t size);
 }
 #endif
 #endif /* _H5public_H */
- 
+
 
diff --git a/src/H5system.c b/src/H5system.c
index dd1f10d..ca0c6bf 100644
--- a/src/H5system.c
+++ b/src/H5system.c
@@ -422,7 +422,7 @@ HDfprintf(FILE *stream, const char *fmt, ...)
                         H5O_token_t token = HDva_arg(ap, H5O_token_t);
 
                         /* Print the raw token. */
-                        n = fprintf(stream, "%02X:%02X:%02X:%02X:%02X:%02X:%02X:%02X:%02X:%02X:%02X:%02X:%02X:%02X:%02X:%02X", 
+                        n = fprintf(stream, "%02X:%02X:%02X:%02X:%02X:%02X:%02X:%02X:%02X:%02X:%02X:%02X:%02X:%02X:%02X:%02X",
                                 (unsigned char)token.__data[15],
                                 (unsigned char)token.__data[14],
                                 (unsigned char)token.__data[13],
diff --git a/test/SWMR_UseCase_UG.txt b/test/SWMR_UseCase_UG.txt
index e29944a..18d4927 100644
--- a/test/SWMR_UseCase_UG.txt
+++ b/test/SWMR_UseCase_UG.txt
@@ -11,7 +11,7 @@
 
 
 %%%%Use Case 1.7%%%%
-   
+
 3. Use Case [1.7]:
      Appending a single chunk
 
diff --git a/test/accum.c b/test/accum.c
index f7d02fd..548a04d 100644
--- a/test/accum.c
+++ b/test/accum.c
@@ -77,12 +77,12 @@ void accum_printf(const H5F_t *f);
 
 /*-------------------------------------------------------------------------
  * Function:    main
- * 
+ *
  * Purpose:     Test the metadata accumulator code
- * 
+ *
  * Return:      Success: SUCCEED
  *              Failure: FAIL
- * 
+ *
  * Programmer:  Mike McGreevy
  *              October 7, 2010
  *
@@ -157,7 +157,7 @@ main(void)
 
     return 0;
 
-error: 
+error:
     if(api_ctx_pushed) H5CX_pop();
 
     HDputs("*** TESTS FAILED ***");
@@ -171,12 +171,12 @@ error:
 
 /*-------------------------------------------------------------------------
  * Function:    test_write_read
- * 
+ *
  * Purpose:     Simple test to write to then read from metadata accumulator.
- * 
+ *
  * Return:      Success: SUCCEED
  *              Failure: FAIL
- * 
+ *
  * Programmer:  Mike McGreevy
  *              October 7, 2010
  *
@@ -222,17 +222,17 @@ error:
     HDfree(read_buf);
 
     return 1;
-} /* test_write_read */ 
+} /* test_write_read */
 
 
 /*-------------------------------------------------------------------------
  * Function:    test_write_read_nonacc_front
- * 
+ *
  * Purpose:     Simple test to write to then read from before metadata accumulator.
- * 
+ *
  * Return:      Success: SUCCEED
  *              Failure: FAIL
- * 
+ *
  * Programmer:  Allen Byrne
  *              October 8, 2010
  *
@@ -281,17 +281,17 @@ error:
     HDfree(read_buf);
 
     return 1;
-} /* test_write_read */ 
+} /* test_write_read */
 
 
 /*-------------------------------------------------------------------------
  * Function:    test_write_read_nonacc_end
- * 
+ *
  * Purpose:     Simple test to write to then read from after metadata accumulator.
- * 
+ *
  * Return:      Success: SUCCEED
  *              Failure: FAIL
- * 
+ *
  * Programmer:  Allen Byrne
  *              October 8, 2010
  *
@@ -340,17 +340,17 @@ error:
     HDfree(read_buf);
 
     return 1;
-} /* test_write_read */ 
+} /* test_write_read */
 
 
 /*-------------------------------------------------------------------------
  * Function:    test_free
  *
  * Purpose:     Simple test to free metadata accumulator.
- * 
+ *
  * Return:      Success: SUCCEED
  *              Failure: FAIL
- * 
+ *
  * Programmer:  Raymond Lu
  *              October 8, 2010
  *
@@ -366,7 +366,7 @@ test_free(H5F_t *f)
 
     TESTING("simple freeing metadata accumulator");
 
-    /* Write and free the whole accumulator. */ 
+    /* Write and free the whole accumulator. */
     wbuf = (int32_t *)HDmalloc(256 * sizeof(int32_t));
     HDassert(wbuf);
     rbuf = (int32_t *)HDmalloc(256 * sizeof(int32_t));
@@ -388,12 +388,12 @@ test_free(H5F_t *f)
     /* Write second quarter of the accumulator */
     if(accum_write(64 * sizeof(int32_t), 64 * sizeof(int32_t), wbuf) < 0) FAIL_STACK_ERROR;
 
-    /* Free the second quarter of the accumulator, the requested area 
+    /* Free the second quarter of the accumulator, the requested area
      * is bigger than the data region on the right side. */
     if(accum_free(f, 64 * sizeof(int32_t), 65 * sizeof(int32_t)) < 0) FAIL_STACK_ERROR;
 
 
-    /* Write half of the accumulator. */ 
+    /* Write half of the accumulator. */
     if(accum_write(0, 128 * sizeof(int32_t), wbuf) < 0) FAIL_STACK_ERROR;
 
     /* Free the first block of 4B */
@@ -525,19 +525,19 @@ error:
         HDfree(expect);
 
     return 1;
-} /* test_free */ 
+} /* test_free */
 
 
 /*-------------------------------------------------------------------------
  * Function:    test_accum_overlap
- * 
+ *
  * Purpose:     This test will write a series of pieces of data
  *              to the accumulator with the goal of overlapping
  *              the writes in various different ways.
- * 
+ *
  * Return:      Success: SUCCEED
  *              Failure: FAIL
- * 
+ *
  * Programmer:  Mike McGreevy
  *              October 7, 2010
  *
@@ -629,9 +629,9 @@ test_accum_overlap(H5F_t *f)
     if(accum_write(96, 3 * sizeof(int32_t), wbuf) < 0) FAIL_STACK_ERROR;
     if(accum_read(96, 3 * sizeof(int32_t), rbuf) < 0) FAIL_STACK_ERROR;
     if(HDmemcmp(wbuf, rbuf, 3 * sizeof(int32_t)) != 0) TEST_ERROR;
- 
+
     /* Set up expected data buffer and verify contents of
-        accumulator as constructed by cases 1-8, above */    
+        accumulator as constructed by cases 1-8, above */
     for(i = 0; i < 5; i++)
         wbuf[i] = 4;
     for(i = 5; i < 6; i++)
@@ -881,14 +881,14 @@ error:
 
 /*-------------------------------------------------------------------------
  * Function:    test_accum_non_overlap_size
- * 
+ *
  * Purpose:     This test will write a series of pieces of data
  *              to the accumulator with the goal of not overlapping
  *              the writes with a data size larger then the accum size.
- * 
+ *
  * Return:      Success: SUCCEED
  *              Failure: FAIL
- * 
+ *
  * Programmer:  Allen Byrne
  *              October 8, 2010
  *
@@ -950,7 +950,7 @@ error:
  *
  * Purpose:     This test will write a series of pieces of data
  *              to the accumulator with the goal of overlapping
- *              the writes with a data size completely overlapping 
+ *              the writes with a data size completely overlapping
  *              the accumulator at both ends.
  *
  * Return:      Success: SUCCEED
@@ -1015,25 +1015,25 @@ error:
 
 /*-------------------------------------------------------------------------
  * Function:    test_accum_adjust
- * 
+ *
  * Purpose:     This test examines the various ways the accumulator might
  *              adjust itself as a result of data appending or prepending
  *              to it.
  *
- *              This test program covers all the code in H5F_accum_adjust, 
+ *              This test program covers all the code in H5F_accum_adjust,
  *              but NOT all possible paths through said code. It only covers
  *              six potential paths through the function. (Again, though, each
  *              piece of code within an if/else statement in H5F_accum_adjust is
- *              covered by one of the paths in this test function). Since there 
- *              are a ridiculous number of total possible paths through this 
+ *              covered by one of the paths in this test function). Since there
+ *              are a ridiculous number of total possible paths through this
  *              function due to its large number of embedded if/else statements,
- *              that's certainly a lot of different test cases to write by hand. 
- *              (Though if someone comes across this code and has some free 
+ *              that's certainly a lot of different test cases to write by hand.
+ *              (Though if someone comes across this code and has some free
  *              time, go for it).
- * 
+ *
  * Return:      Success: SUCCEED
  *              Failure: FAIL
- * 
+ *
  * Programmer:  Mike McGreevy
  *              October 11, 2010
  *
@@ -1068,7 +1068,7 @@ test_accum_adjust(H5F_t *f)
      * an increase in size because it's already at it's maximum size */
     if(accum_write((1024 * 1024), (1024 * 1024) - 1, wbuf) < 0) FAIL_STACK_ERROR;
 
-    /* Write a small (1KB) block that prepends to the front of the accumulator. */ 
+    /* Write a small (1KB) block that prepends to the front of the accumulator. */
     /* ==> Accumulator will need more buffer space */
     /* ==> Accumulator will try to resize, but see that it's getting too big */
     /* ==> Size of new block is less than half maximum size of accumulator */
@@ -1084,7 +1084,7 @@ test_accum_adjust(H5F_t *f)
     /* Read back and verify second write */
     if(accum_read((1024 * 1024) - 1024, 1024, rbuf) < 0) FAIL_STACK_ERROR;
     if(HDmemcmp(wbuf, rbuf, (size_t)1024) != 0) TEST_ERROR;
-    
+
     /* Reset accumulator for next case */
     if(accum_reset(f) < 0) FAIL_STACK_ERROR;
 
@@ -1144,7 +1144,7 @@ test_accum_adjust(H5F_t *f)
         to disk */
     if(accum_write(0, 1, wbuf) < 0) FAIL_STACK_ERROR;
 
-    /* Read in the piece we wrote to disk above, and then verify that 
+    /* Read in the piece we wrote to disk above, and then verify that
         the data is as expected */
     if(accum_read((1024 * 1024) - 1, 1024, rbuf) < 0) FAIL_STACK_ERROR;
     if(HDmemcmp(wbuf, rbuf, (size_t)1024) != 0) TEST_ERROR;
@@ -1175,7 +1175,7 @@ test_accum_adjust(H5F_t *f)
     /* ==> Size of new block is less than than half maximum size of accumulator */
     /* ==> New block being appended to accumulator */
     /* ==> We can slide the dirty region down, to accomodate the request */
-    /* ==> Max Buffer Size - (dirty offset + adjust size) >= 2 * size) */ 
+    /* ==> Max Buffer Size - (dirty offset + adjust size) >= 2 * size) */
     /* ==> Need to adjust location of accumulator while appending */
     /* ==> Accumulator will need to be reallocated */
     if(accum_write(1048571, 349523, wbuf) < 0) FAIL_STACK_ERROR;
@@ -1184,7 +1184,7 @@ test_accum_adjust(H5F_t *f)
         to disk */
     if(accum_write(1398900, 1, wbuf) < 0) FAIL_STACK_ERROR;
 
-    /* Read in the piece we wrote to disk above, and then verify that 
+    /* Read in the piece we wrote to disk above, and then verify that
         the data is as expected */
     if(accum_read(1048571, 349523, rbuf) < 0) FAIL_STACK_ERROR;
     if(HDmemcmp(wbuf, rbuf, (size_t)349523) != 0) TEST_ERROR;
@@ -1213,7 +1213,7 @@ test_accum_adjust(H5F_t *f)
     /* ==> Size of new block is less than than half maximum size of accumulator */
     /* ==> New block being appended to accumulator */
     /* ==> We can slide the dirty region down, to accomodate the request */
-    /* ==> Max Buffer Size - (dirty offset + adjust size) < 2 * size) */ 
+    /* ==> Max Buffer Size - (dirty offset + adjust size) < 2 * size) */
     /* ==> Need to adjust location of accumulator while appending */
     if(accum_write((1024 * 1024) - 5, 10, wbuf) < 0) FAIL_STACK_ERROR;
 
@@ -1221,7 +1221,7 @@ test_accum_adjust(H5F_t *f)
         to disk */
     if(accum_write(0, 1, wbuf) < 0) FAIL_STACK_ERROR;
 
-    /* Read in the piece we wrote to disk above, and then verify that 
+    /* Read in the piece we wrote to disk above, and then verify that
         the data is as expected */
     if(accum_read((1024 * 1024) - 5, 10, rbuf) < 0) FAIL_STACK_ERROR;
     if(HDmemcmp(wbuf, rbuf, (size_t)10) != 0) TEST_ERROR;
@@ -1253,7 +1253,7 @@ test_accum_adjust(H5F_t *f)
         to disk */
     if(accum_write(1398900, 1, wbuf) < 0) FAIL_STACK_ERROR;
 
-    /* Read in the piece we wrote to disk above, and then verify that 
+    /* Read in the piece we wrote to disk above, and then verify that
         the data is as expected */
     if(accum_read(1048571, 349523, rbuf) < 0) FAIL_STACK_ERROR;
     if(HDmemcmp(wbuf, rbuf, (size_t)349523) != 0) TEST_ERROR;
@@ -1279,23 +1279,23 @@ error:
 
 /*-------------------------------------------------------------------------
  * Function:    test_read_after
- * 
- * Purpose:     This test will verify the case when metadata is read partly 
- *              from the accumulator and partly from disk.  The test will 
+ *
+ * Purpose:     This test will verify the case when metadata is read partly
+ *              from the accumulator and partly from disk.  The test will
  *              write a block of data at address 512, force the data to be
- *              written to disk, write new data partially overlapping the 
- *              original block from below, then read data at address 512.  
- *              The data read should be partly new and partly original. 
- * 
+ *              written to disk, write new data partially overlapping the
+ *              original block from below, then read data at address 512.
+ *              The data read should be partly new and partly original.
+ *
  * Return:      Success: SUCCEED
  *              Failure: FAIL
- * 
+ *
  * Programmer:  Larry Knox
  *              October 8, 2010
  *
  *-------------------------------------------------------------------------
  */
-unsigned 
+unsigned
 test_read_after(H5F_t *f)
 {
     int i = 0;
@@ -1329,14 +1329,14 @@ test_read_after(H5F_t *f)
         of the original block */
     if(accum_write(256, 512, wbuf) < 0) FAIL_STACK_ERROR;
 
-    /* Read 128 bytes at the original address, and then  */ 
+    /* Read 128 bytes at the original address, and then  */
     if(accum_read(512, 512, rbuf) < 0) FAIL_STACK_ERROR;
 
-    /* Set the second half of wbuf back to 1s */ 
+    /* Set the second half of wbuf back to 1s */
     for(i = 64; i < s; i++)
         wbuf[i] = 1;
 
-    /* Read in the piece we wrote to disk above, and then verify that 
+    /* Read in the piece we wrote to disk above, and then verify that
         the data is as expected */
     if(accum_read(512, 512, rbuf) < 0) FAIL_STACK_ERROR;
     if(HDmemcmp(wbuf, rbuf, (size_t)128) != 0) TEST_ERROR;
@@ -1362,19 +1362,19 @@ error:
 
 /*-------------------------------------------------------------------------
  * Function:    test_big
- * 
+ *
  * Purpose:     This test exercises writing large pieces of metadata to the
  *		file.
- * 
+ *
  * Return:      Success: SUCCEED
  *              Failure: FAIL
- * 
+ *
  * Programmer:  Quincey Koziol
  *              October 12, 2010
  *
  *-------------------------------------------------------------------------
  */
-unsigned 
+unsigned
 test_big(H5F_t *f)
 {
     uint8_t *wbuf, *wbuf2, *rbuf, *zbuf;        /* Buffers for reading & writing, etc */
@@ -1670,19 +1670,19 @@ error:
 
 /*-------------------------------------------------------------------------
  * Function:    test_random_write
- * 
+ *
  * Purpose:     This test writes random pieces of data to the file and
  *		then reads it all back.
- * 
+ *
  * Return:      Success: SUCCEED
  *              Failure: FAIL
- * 
+ *
  * Programmer:  Quincey Koziol
  *              October 11, 2010
  *
  *-------------------------------------------------------------------------
  */
-unsigned 
+unsigned
 test_random_write(H5F_t *f)
 {
     uint8_t *wbuf, *rbuf;       /* Buffers for reading & writing */
@@ -1808,23 +1808,23 @@ error:
 
 /*-------------------------------------------------------------------------
  * Function:    test_swmr_write_big
- * 
+ *
  * Purpose:    	A SWMR test: verifies that writing "large" metadata to a file
- *		opened with SWMR_WRITE will flush the existing metadata in the 
+ *		opened with SWMR_WRITE will flush the existing metadata in the
  *		accumulator to disk first before writing the "large" metadata
- *	 	to disk.  
+ *	 	to disk.
  *		This test will fork and exec a reader "accum_swmr_reader" which
  *		opens the same file with SWMR_READ and verifies that the correct
  *		metadata is read from disk.
- * 
+ *
  * Return:      Success: 0
  *              Failure: 1
- * 
+ *
  * Programmer:  Vailin Choi; April 2013
  *
  *-------------------------------------------------------------------------
  */
-unsigned 
+unsigned
 test_swmr_write_big(hbool_t newest_format)
 {
     hid_t fid = -1;			    /* File ID */
@@ -1991,11 +1991,11 @@ test_swmr_write_big(hbool_t newest_format)
             FAIL_STACK_ERROR;
 
         /* Close and remove the file */
-        if(H5Fclose(fid) < 0) 
+        if(H5Fclose(fid) < 0)
             FAIL_STACK_ERROR;
 
         /* Close the property list */
-        if(H5Pclose(fapl) < 0) 
+        if(H5Pclose(fapl) < 0)
             FAIL_STACK_ERROR;
 
         /* Pop API context */
@@ -2034,12 +2034,12 @@ error:
 
 /*-------------------------------------------------------------------------
  * Function:    accum_printf
- * 
+ *
  * Purpose:     Debug function to print some stats about the accumulator
- * 
+ *
  * Return:      Success: SUCCEED
  *              Failure: FAIL
- * 
+ *
  * Programmer:  Mike McGreevy
  *              October 7, 2010
  *
diff --git a/test/accum_swmr_reader.c b/test/accum_swmr_reader.c
index ac48a13..c3be09a 100644
--- a/test/accum_swmr_reader.c
+++ b/test/accum_swmr_reader.c
@@ -33,15 +33,15 @@ const char *FILENAME[] = {
 
 /*-------------------------------------------------------------------------
  * Function:    main
- * 
- * Purpose:     This is the reader forked/execved by "test_swmr_write_big()" 
+ *
+ * Purpose:     This is the reader forked/execved by "test_swmr_write_big()"
  *		        test in accum.c.  The reader reads at address 1024 from the file
  *		        and verifies that the metadata in the accumulator at address
  * 		        1024 does get written to disk.
- * 
+ *
  * Return:      Success: EXIT_SUCCESS
  *              Failure: EXIT_FAILURE
- * 
+ *
  * Programmer:  Vailin Choi; June 2013
  *
  *-------------------------------------------------------------------------
@@ -85,7 +85,7 @@ main(void)
     api_ctx_pushed = TRUE;
 
     /* Get H5F_t * to internal file structure */
-    if(NULL == (f = (H5F_t *)H5VL_object(fid))) 
+    if(NULL == (f = (H5F_t *)H5VL_object(fid)))
         FAIL_STACK_ERROR
 
     /* Should read in [1024, 2024] with buf data */
@@ -93,7 +93,7 @@ main(void)
         FAIL_STACK_ERROR;
 
     /* Verify the data read is correct */
-    if(HDmemcmp(buf, rbuf, (size_t)1024) != 0) 
+    if(HDmemcmp(buf, rbuf, (size_t)1024) != 0)
         TEST_ERROR;
 
     /* CLose the file */
diff --git a/test/big.c b/test/big.c
index 481da58..a2f07af 100644
--- a/test/big.c
+++ b/test/big.c
@@ -69,7 +69,7 @@
 #   define GB8LL	0	/*cannot do the test*/
 #endif
 
-/* Define Small, Large, Extra Large, Huge File which 
+/* Define Small, Large, Extra Large, Huge File which
  * corrspond to less than 2GB, 2GB, 4GB, and tens of GB file size.
  * NO_FILE stands for "no file" to be tested.
  */
@@ -633,7 +633,7 @@ error:
     return 1;
 } /* end test_sec2() */
 
-static int 
+static int
 test_stdio(hid_t fapl)
 {
     char	filename[1024];
diff --git a/test/cache_common.c b/test/cache_common.c
index 038a0ed..1dc13a1 100644
--- a/test/cache_common.c
+++ b/test/cache_common.c
@@ -724,7 +724,7 @@ variable_get_final_load_size(const void *image, size_t image_len,
  */
 
 static htri_t
-verify_chksum(const void H5_ATTR_UNUSED *image, size_t H5_ATTR_UNUSED len, void *udata, 
+verify_chksum(const void H5_ATTR_UNUSED *image, size_t H5_ATTR_UNUSED len, void *udata,
     int32_t H5_ATTR_NDEBUG_UNUSED entry_type)
 {
     test_entry_t *entry;
diff --git a/test/cross_read.c b/test/cross_read.c
index 5444aae..c16ddbc 100644
--- a/test/cross_read.c
+++ b/test/cross_read.c
@@ -213,7 +213,7 @@ error:
  * Purpose:     Handle each dataset from the data file.
  *
  * Return:      Success:        0
- *              Failure:        Number of failures 
+ *              Failure:        Number of failures
  *
  * Programmer:  Raymond Lu
  *              21 January 2011
@@ -242,46 +242,46 @@ check_file(char *filename)
 
     TESTING("dataset of LE FLOAT with scale-offset filter");
     nerrors += check_data_f(DATASETNAME2, fid);
- 
+
     TESTING("dataset of BE FLOAT with scale-offset filter");
     nerrors += check_data_f(DATASETNAME3, fid);
 
     TESTING("dataset of LE DOUBLE with scale-offset filter");
     nerrors += check_data_f(DATASETNAME4, fid);
- 
+
     TESTING("dataset of BE DOUBLE with scale-offset filter");
     nerrors += check_data_f(DATASETNAME5, fid);
- 
+
     TESTING("dataset of LE CHAR with scale-offset filter");
     nerrors += check_data_i(DATASETNAME6, fid);
- 
+
     TESTING("dataset of BE CHAR with scale-offset filter");
     nerrors += check_data_i(DATASETNAME7, fid);
- 
+
     TESTING("dataset of LE SHORT with scale-offset filter");
     nerrors += check_data_i(DATASETNAME8, fid);
- 
+
     TESTING("dataset of BE SHORT with scale-offset filter");
     nerrors += check_data_i(DATASETNAME9, fid);
 
     TESTING("dataset of LE INT with scale-offset filter");
     nerrors += check_data_i(DATASETNAME10, fid);
- 
+
     TESTING("dataset of BE INT with scale-offset filter");
     nerrors += check_data_i(DATASETNAME11, fid);
 
     TESTING("dataset of LE LONG LONG with scale-offset filter");
     nerrors += check_data_i(DATASETNAME12, fid);
- 
+
     TESTING("dataset of BE LONG LONG with scale-offset filter");
     nerrors += check_data_i(DATASETNAME13, fid);
 
     TESTING("dataset of LE FLOAT with Fletcher32 filter");
     nerrors += check_data_f(DATASETNAME14, fid);
- 
+
     TESTING("dataset of BE FLOAT with Fletcher32 filter");
     nerrors += check_data_f(DATASETNAME15, fid);
- 
+
     TESTING("dataset of LE FLOAT with Deflate filter");
 #ifdef H5_HAVE_FILTER_DEFLATE
     nerrors += check_data_f(DATASETNAME16, fid);
diff --git a/test/del_many_dense_attrs.c b/test/del_many_dense_attrs.c
index ada7a6f..4c1efae 100644
--- a/test/del_many_dense_attrs.c
+++ b/test/del_many_dense_attrs.c
@@ -13,7 +13,7 @@
 
 /*
  * Purpose:	Test to verify that the infinite loop closing library/abort failure
- *          is fixed when the application creates and removes dense attributes 
+ *          is fixed when the application creates and removes dense attributes
  *          (See HDFFV-10659).
  */
 
@@ -22,7 +22,7 @@
 
 /* The test file name */
 const char *FILENAME[] = {
-    "del_many_dense_attrs", 
+    "del_many_dense_attrs",
     NULL
 };
 
@@ -49,7 +49,7 @@ static void catch_signal(int H5_ATTR_UNUSED signo)
  * Function:	main
  *
  * Purpose:	Test to verify that the infinite loop closing library/abort failure
- *          is fixed when the application creates and removes dense attributes 
+ *          is fixed when the application creates and removes dense attributes
  *          (See HDFFV-10659).
  *
  * Return:	Success:	exit(EXIT_SUCCESS)
@@ -137,7 +137,7 @@ main(void)
         if(H5Aclose(aid) < 0)
             TEST_ERROR
     }
-    
+
     /* Close the datatype */
     if(H5Tclose(tid) < 0)
        TEST_ERROR
diff --git a/test/dsets.c b/test/dsets.c
index 2201d89..34108d6 100644
--- a/test/dsets.c
+++ b/test/dsets.c
@@ -5364,7 +5364,7 @@ test_types(hid_t file)
     (space=H5Screate_simple(1, &nelmts, NULL)) < 0 ||
     (dset=H5Dcreate2(grp, "bitfield_1", type, space, H5P_DEFAULT, H5P_DEFAULT, H5P_DEFAULT)) < 0)
     goto error;
-    for(i=0; i<sizeof buf; i++) buf[i] = (unsigned char)(0xff ^ i); 
+    for(i=0; i<sizeof buf; i++) buf[i] = (unsigned char)(0xff ^ i);
     if(H5Dwrite(dset, type, H5S_ALL, H5S_ALL, H5P_DEFAULT, buf) < 0)
     goto error;
 
@@ -5378,7 +5378,7 @@ test_types(hid_t file)
     (space=H5Screate_simple(1, &nelmts, NULL)) < 0 ||
     (dset=H5Dcreate2(grp, "bitfield_2", type, space, H5P_DEFAULT, H5P_DEFAULT, H5P_DEFAULT)) < 0)
     goto error;
-    for(i=0; i<sizeof buf; i++) buf[i] = (unsigned char)(0xff ^ i); 
+    for(i=0; i<sizeof buf; i++) buf[i] = (unsigned char)(0xff ^ i);
     if(H5Dwrite(dset, type, H5S_ALL, H5S_ALL, H5P_DEFAULT, buf) < 0)
     goto error;
     if(H5Sclose(space) < 0) goto error;
@@ -9610,15 +9610,15 @@ test_fixed_array(hid_t fapl)
 
     const hsize_t     chunk_dim2[2] = {4, 3}; /* Chunk dimensions */
 
-    int         **chunks            = NULL;    /* # of chunks for dataset dimensions */ 
-    int         **chunks_big        = NULL;    /* # of chunks for big dataset dimensions */ 
+    int         **chunks            = NULL;    /* # of chunks for dataset dimensions */
+    int         **chunks_big        = NULL;    /* # of chunks for big dataset dimensions */
     int         *chunks_bytes       = NULL;
     int         *chunks_big_bytes   = NULL;
 
     int         chunk_row;              /* chunk row index */
     int         chunk_col;              /* chunk column index */
 
-    hsize_t     **coord             = NULL;         /* datdaset coordinates */ 
+    hsize_t     **coord             = NULL;         /* datdaset coordinates */
     hsize_t     **coord_big         = NULL;         /* big datdaset coordinates */
     hsize_t     *coord_bytes        = NULL;
     hsize_t     *coord_big_bytes    = NULL;
@@ -10014,7 +10014,7 @@ error:
         H5Sclose(mem_id);
         H5Fclose(fid);
     } H5E_END_TRY;
-    
+
     HDfree(wbuf_big);
     HDfree(rbuf_big);
     HDfree(chunks);
diff --git a/test/efc.c b/test/efc.c
index b818fb4..9ae7d53 100644
--- a/test/efc.c
+++ b/test/efc.c
@@ -636,7 +636,7 @@ test_graph_nocycle(void)
     /* Test 3: Simple "inverted" tree.  Two parent files share a child file,
      * which has its own child file.  Verify that the child's child is not
      * closed until both parents' EFCs are released.  First release through one
-     * parent, then reopen through that parent and release the other, then 
+     * parent, then reopen through that parent and release the other, then
      * re-release the first parent. */
     if(NULL == (f0 = H5F_open(filename[0],
             H5F_ACC_RDWR | H5F_ACC_CREAT | H5F_ACC_TRUNC, fcpl_id, fapl_id)))
@@ -867,7 +867,7 @@ test_graph_cycle(void)
 
 
     /* Test 1: File caches itself. Verify that closing the file causes it to be
-     * actually closed, and there is no other unexpected behavior. 
+     * actually closed, and there is no other unexpected behavior.
      */
     if(NULL == (f0 = H5F_open(filename[0],
             H5F_ACC_RDWR | H5F_ACC_CREAT | H5F_ACC_TRUNC, fcpl_id, fapl_id)))
diff --git a/test/enc_dec_plist_cross_platform.c b/test/enc_dec_plist_cross_platform.c
index 15c7391..f54f675 100644
--- a/test/enc_dec_plist_cross_platform.c
+++ b/test/enc_dec_plist_cross_platform.c
@@ -157,7 +157,7 @@ error:
 }
 
 static int
-test_plists(const char *filename_prefix) 
+test_plists(const char *filename_prefix)
 {
     unsigned config_1, config_2;
     int fd_1, fd_2;
diff --git a/test/enum.c b/test/enum.c
index 26e64fd..109f7c3 100644
--- a/test/enum.c
+++ b/test/enum.c
@@ -128,7 +128,7 @@ test_conv(hid_t file)
 {
     hid_t	cwg=-1, type=-1, space=-1, dset=-1;
     c_e1	val;
-    /* Some values are out of range for testing. The library should accept them */        
+    /* Some values are out of range for testing. The library should accept them */
     static c_e1	data1[]={E1_RED,   E1_GREEN, E1_BLUE,  E1_GREEN, E1_WHITE,
 			 E1_WHITE, E1_BLACK, E1_GREEN, E1_BLUE,  E1_RED,
 			 E1_RED,   E1_BLUE,  E1_GREEN, E1_BLACK, E1_WHITE,
diff --git a/test/evict_on_close.c b/test/evict_on_close.c
index b7d30a9..9f6607a 100644
--- a/test/evict_on_close.c
+++ b/test/evict_on_close.c
@@ -744,7 +744,7 @@ check_dset_scheme(hid_t fid, const char *dset_name)
         TEST_ERROR;
 
     /* Record the number of cache entries */
-    during = file_ptr->shared->cache->index_len; 
+    during = file_ptr->shared->cache->index_len;
 
 #ifdef EOC_MANUAL_INSPECTION
     HDprintf("\nCACHE AFTER DATA READ (WHILE OPEN):\n");
diff --git a/test/external.c b/test/external.c
index 4d9fef0..d29fb6b 100644
--- a/test/external.c
+++ b/test/external.c
@@ -1418,7 +1418,7 @@ main(void)
         nerrors += test_path_absolute(current_fapl_id);
         nerrors += test_path_relative(current_fapl_id);
         nerrors += test_path_relative_cwd(current_fapl_id);
- 
+
         /* Verify symbol table messages are cached */
         nerrors += (h5_verify_cached_stabs(EXT_FNAME, current_fapl_id) < 0 ? 1 : 0);
 
diff --git a/test/external_common.c b/test/external_common.c
index c9b6584..a9e600b 100644
--- a/test/external_common.c
+++ b/test/external_common.c
@@ -65,7 +65,7 @@ reset_raw_data_files(hbool_t is_env)
             HDsprintf(filename, "extern_%lur.raw", (unsigned long)i + 1);
         if((fd = HDopen(filename, O_RDWR|O_CREAT|O_TRUNC, H5_POSIX_CREATE_MODE_RW)) < 0)
             goto error;
-        
+
         /* Write garbage data to the file. This allows us to test the
          * the ability to set an offset in the raw data file.
          */
@@ -102,7 +102,7 @@ reset_raw_data_files(hbool_t is_env)
             HDsprintf(filename, "extern_%luw.raw", (unsigned long)i + 1);
         if((fd = HDopen(filename, O_RDWR|O_CREAT|O_TRUNC, H5_POSIX_CREATE_MODE_RW)) < 0)
             goto error;
-        
+
         /* Write garbage data to the file. This allows us to test the
          * the ability to set an offset in the raw data file.
          */
diff --git a/test/farray.c b/test/farray.c
index 355ecbb..b647b51 100644
--- a/test/farray.c
+++ b/test/farray.c
@@ -143,7 +143,7 @@ init_cparam(H5FA_create_t *cparam, farray_test_param_t *tparam)
  * Purpose:     Create file and retrieve pointer to internal file object
  *
  * Return:      SUCCEED/FAIL
- *   
+ *
  *-------------------------------------------------------------------------
  */
 static herr_t
@@ -262,7 +262,7 @@ set_fa_state(const H5FA_create_t *cparam, farray_state_t *state)
  *-------------------------------------------------------------------------
  */
 static int
-reopen_file(hid_t *fid, H5F_t **f, hid_t fapl_id, 
+reopen_file(hid_t *fid, H5F_t **f, hid_t fapl_id,
     H5FA_t **fa, haddr_t fa_addr, const farray_test_param_t *tparam)
 {
     /* Check for closing & re-opening the array */
diff --git a/test/fheap.c b/test/fheap.c
index 899c41f..b1a0db0 100644
--- a/test/fheap.c
+++ b/test/fheap.c
@@ -82,7 +82,7 @@
 
 /* The number of settings for testing: page buffering, file space strategy and persisting free-space */
 #define NUM_PB_FS                   6
-#define PAGE_BUFFER_PAGE_SIZE       4096 
+#define PAGE_BUFFER_PAGE_SIZE       4096
 
 const char *FILENAME[] = {
     "fheap",
@@ -7665,7 +7665,7 @@ test_man_incr_insert_remove(hid_t fapl, H5HF_create_t *cparam, fheap_test_param_
         FAIL_STACK_ERROR
 
     /*
-     * Test incremental insert and removal 
+     * Test incremental insert and removal
      */
     TESTING("incremental object insertion and removal")
 
@@ -7691,7 +7691,7 @@ test_man_incr_insert_remove(hid_t fapl, H5HF_create_t *cparam, fheap_test_param_
         if(H5HF_insert(fh, (sizeof(obj1)), &obj1, heap_id[i]) < 0)
             FAIL_STACK_ERROR
     } /* end for */
-     
+
     /* Close the fractal heap */
     if(H5HF_close(fh) < 0)
         TEST_ERROR
@@ -16350,7 +16350,7 @@ main(void)
     def_fapl = h5_fileaccess();
     ExpressMode = GetTestExpress();
 
-    /* 
+    /*
      * Caution when turning on ExpressMode 0:
      *  It will activate testing with different combinations of
      *       page buffering and file space strategy and the
@@ -16400,12 +16400,12 @@ main(void)
     for(v = 0; v < num_pb_fs; v++) {
         /* Skip test when:
            a) multi/split drivers and
-           b) persisting free-space or using paged aggregation strategy 
+           b) persisting free-space or using paged aggregation strategy
            because the library will fail file creation (temporary) for the above conditions */
         if(!contig_addr_vfd && v)
             break;
 
-        if((fcpl = H5Pcopy(def_fcpl)) < 0) 
+        if((fcpl = H5Pcopy(def_fcpl)) < 0)
             TEST_ERROR
 
         switch(v) {
@@ -16419,14 +16419,14 @@ main(void)
                     TEST_ERROR
                 fapl = def_fapl;
                 /* This is a fix for the daily test failure from the checkin for libver bounds. */
-                /* 
+                /*
                  * Many tests failed the file size check when comparing (a) and (b) as below:
                  * --Create a file and close the file.  Got the initial file size (a).
                  * --Reopen the file, perform fractal heap operations, and close the file.
                  *   Got the file size (b).
                  * The cause for the file size differences:
-                 *   When the file is initially created with persisting free-space and with 
-                 *   (earliest, latest) libver bounds, the file will have version 2 superblock 
+                 *   When the file is initially created with persisting free-space and with
+                 *   (earliest, latest) libver bounds, the file will have version 2 superblock
                  *   due to non-default free-space handling.  As the low bound is earliest,
                  *   the library uses version 1 object header when creating the superblock
                  *   extension message.
@@ -16440,7 +16440,7 @@ main(void)
                  *  The fix:
                  *    Set libver bounds in fapl to (v18, latest) so that the file created in the
                  *    test routines will have low bound set to v18.  This will cause the
-                 *    library to use version 2 object header for the superblock extension 
+                 *    library to use version 2 object header for the superblock extension
                  *    message.
                  */
                 if(H5Pset_libver_bounds(fapl, H5F_LIBVER_V18, H5F_LIBVER_LATEST) < 0)
diff --git a/test/file_image.c b/test/file_image.c
index dfb3ae8..0d4873a 100644
--- a/test/file_image.c
+++ b/test/file_image.c
@@ -88,16 +88,16 @@ test_properties(void)
     hid_t   fapl_1 = -1;
     hid_t   fapl_2 = -1;
     char    *buffer = 0;
-    int     count = 10; 
+    int     count = 10;
     void    *temp = 0;
     char    *temp2 = 0;
-    int     i;   
+    int     i;
     size_t  size;
     size_t  temp_size;
     int     retval = 1;
 
     TESTING("File image property list functions");
-    
+
     /* Initialize file image buffer
      *
      * Note: this image will not contain a valid HDF5 file, as it complicates testing
@@ -122,7 +122,7 @@ test_properties(void)
 
     /* Set file image stuff */
     if(H5Pset_file_image(fapl_1, (void *)buffer, size) < 0) FAIL_STACK_ERROR
-    
+
     /* Get the same */
     if(H5Pget_file_image(fapl_1, (void **)&temp, &temp_size) < 0) FAIL_STACK_ERROR
 
@@ -137,9 +137,9 @@ test_properties(void)
 
     /* Get values from the new fapl */
     if(H5Pget_file_image(fapl_2, (void **)&temp2, &temp_size) < 0) FAIL_STACK_ERROR
-    
+
     /* Check that sizes are the same, and that the buffers are identical but separate */
-    VERIFY(temp_size == size,"Sizes of buffers don't match"); 
+    VERIFY(temp_size == size,"Sizes of buffers don't match");
     VERIFY(temp2 != NULL,"Recieved buffer not set");
     VERIFY(temp2 != buffer, "Retrieved buffer is the same as original");
     VERIFY(temp2 != temp, "Retrieved buffer is the same as previously retrieved buffer");
@@ -334,7 +334,7 @@ reset_udata(udata_t *u)
 static int
 test_callbacks(void)
 {
-    H5FD_file_image_callbacks_t real_callbacks = {&malloc_cb, &memcpy_cb, &realloc_cb, 
+    H5FD_file_image_callbacks_t real_callbacks = {&malloc_cb, &memcpy_cb, &realloc_cb,
     &free_cb, &udata_copy_cb, &udata_free_cb, NULL};
     H5FD_file_image_callbacks_t null_callbacks = {NULL, NULL, NULL, NULL, NULL, NULL, NULL};
     H5FD_file_image_callbacks_t callbacks;
@@ -388,9 +388,9 @@ test_callbacks(void)
     /* Get file image callbacks */
     callbacks = null_callbacks;
     if(H5Pget_file_image_callbacks(fapl_1, &callbacks) < 0) FAIL_STACK_ERROR
-    
+
     /* Verify values */
-    VERIFY(callbacks.image_malloc == &malloc_cb, "malloc callback was not set or retrieved properly");   
+    VERIFY(callbacks.image_malloc == &malloc_cb, "malloc callback was not set or retrieved properly");
     VERIFY(callbacks.image_memcpy == &memcpy_cb, "memcpy callback was not set or retrieved properly");
     VERIFY(callbacks.image_realloc == &realloc_cb, "realloc callback was not set or retrieved properly");
     VERIFY(callbacks.image_free == &free_cb, "free callback was not set or retrieved properly");
@@ -398,7 +398,7 @@ test_callbacks(void)
     VERIFY(callbacks.udata_free == &udata_free_cb, "udata free callback was not set or retrieved properly");
     VERIFY(callbacks.udata == udata, "udata was not set or retrieved properly");
 
-    
+
     /*
      * Check callbacks in internal function without a previously set file image
      */
@@ -406,7 +406,7 @@ test_callbacks(void)
     /* Copy fapl */
     reset_udata(udata);
     if((fapl_2 = H5Pcopy(fapl_1)) < 0) FAIL_STACK_ERROR
-    
+
     /* Verify that the property's copy callback used the correct image callbacks */
     VERIFY(udata->used_callbacks == (UDATA_COPY), "Copying a fapl with no image used incorrect callbacks");
 
@@ -419,14 +419,14 @@ test_callbacks(void)
 
     /* Copy again */
     if((fapl_2 = H5Pcopy(fapl_1)) < 0) FAIL_STACK_ERROR
-    
+
     /* Remove property from fapl */
     reset_udata(udata);
     if(H5Premove(fapl_2, H5F_ACS_FILE_IMAGE_INFO_NAME) < 0) FAIL_STACK_ERROR
 
     /* Verify that the property's delete callback was called using the correct image callbacks */
     VERIFY(udata->used_callbacks == (UDATA_FREE), "Removing a property from a fapl with no image used incorrect callbacks");
-    
+
     /* Close it again */
     if(H5Pclose(fapl_2) < 0) FAIL_STACK_ERROR
 
@@ -442,15 +442,15 @@ test_callbacks(void)
     if(H5Pset_file_image(fapl_1, (void *)file_image, size) < 0) FAIL_STACK_ERROR
 
     VERIFY(udata->used_callbacks == (MALLOC | MEMCPY), "Setting a file image (first time) used incorrect callbacks");
-    
+
     /*
      * Check callbacks in internal functions with a previously set file image
      */
-    
+
     /* Copy fapl */
     reset_udata(udata);
     if((fapl_2 = H5Pcopy(fapl_1)) < 0) FAIL_STACK_ERROR
-    
+
     /* Verify that the property's copy callback used the correct image callbacks */
     VERIFY(udata->used_callbacks == (MALLOC | MEMCPY | UDATA_COPY), "Copying a fapl with an image used incorrect callbacks");
     VERIFY(udata->malloc_src == H5FD_FILE_IMAGE_OP_PROPERTY_LIST_COPY, "malloc callback has wrong source");
@@ -466,7 +466,7 @@ test_callbacks(void)
 
     /* Copy again */
     if((fapl_2 = H5Pcopy(fapl_1)) < 0) FAIL_STACK_ERROR
-    
+
     /* Remove property from fapl */
     reset_udata(udata);
     if(H5Premove(fapl_2, H5F_ACS_FILE_IMAGE_INFO_NAME) < 0) FAIL_STACK_ERROR
@@ -474,11 +474,11 @@ test_callbacks(void)
     /* Verify that the property's delete callback was called using the correct image callbacks */
     VERIFY(udata->used_callbacks == (FREE | UDATA_FREE), "Removing a property from a fapl with an image used incorrect callbacks");
     VERIFY(udata->free_src == H5FD_FILE_IMAGE_OP_PROPERTY_LIST_CLOSE, "free callback has wrong source");
-    
+
     /* Close it again */
     if(H5Pclose(fapl_2) < 0) FAIL_STACK_ERROR
 
-    /* Get file image */ 
+    /* Get file image */
     reset_udata(udata);
     if(H5Pget_file_image(fapl_1, (void **)&temp_file_image, &temp_size) < 0) FAIL_STACK_ERROR
 
@@ -538,11 +538,11 @@ test_core(void)
     int     fd;
     h5_stat_t  sb;
     herr_t ret;
-    H5FD_file_image_callbacks_t callbacks = {&malloc_cb, &memcpy_cb, &realloc_cb, 
+    H5FD_file_image_callbacks_t callbacks = {&malloc_cb, &memcpy_cb, &realloc_cb,
     &free_cb, &udata_copy_cb, &udata_free_cb, NULL};
 
     TESTING("Initial file image and callbacks in Core VFD");
-    
+
     /* Create fapl */
     fapl = h5_fileaccess();
     VERIFY(fapl >= 0, "fapl creation failed");
@@ -579,7 +579,7 @@ test_core(void)
     reset_udata(udata);
     file = H5Fopen(copied_filename, H5F_ACC_RDONLY, fapl);
     VERIFY(file >= 0, "H5Fopen failed");
-    VERIFY((udata->used_callbacks == MALLOC) || 
+    VERIFY((udata->used_callbacks == MALLOC) ||
             (udata->used_callbacks == (MALLOC | UDATA_COPY | UDATA_FREE)), "opening a core file used the wrong callbacks");
     VERIFY(udata->malloc_src == H5FD_FILE_IMAGE_OP_FILE_OPEN, "Malloc callback came from wrong sourc in core open");
 
@@ -599,24 +599,24 @@ test_core(void)
     dims[1] = DIM1;
     space = H5Screate_simple(RANK, dims, dims);
     VERIFY(space >= 0, "H5Screate failed");
-    
+
     /* Create new dset, invoking H5FD_core_write */
     reset_udata(udata);
     dset = H5Dcreate2(file, DSET_NAME, H5T_NATIVE_INT, space, H5P_DEFAULT, H5P_DEFAULT, H5P_DEFAULT);
     VERIFY(dset >=0, "H5Dcreate failed");
-    
+
     /* Flush the write and check the realloc callback */
     ret = H5Fflush(file, H5F_SCOPE_LOCAL);
     VERIFY(ret >= 0, "H5Fflush failed");
     VERIFY(udata->used_callbacks == (REALLOC), "core write used the wrong callbacks");
     VERIFY(udata->realloc_src == H5FD_FILE_IMAGE_OP_FILE_RESIZE, "Realloc callback came from wrong source in core write");
-    
+
     /* Close dset and space */
     ret = H5Dclose(dset);
     VERIFY(ret >= 0, "H5Dclose failed");
     ret = H5Sclose(space);
     VERIFY(ret >= 0, "H5Sclose failed");
-    
+
     /* Test file close */
     reset_udata(udata);
     ret = H5Fclose(file);
@@ -644,11 +644,11 @@ test_core(void)
     if(H5Fclose(file) < 0) FAIL_STACK_ERROR
 
     /* Release resources */
-    h5_clean_files(FILENAME, fapl); 
+    h5_clean_files(FILENAME, fapl);
     HDfree(udata);
     HDfree(file_image);
     HDremove(copied_filename);
-    
+
     PASSED();
 
     return 0;
@@ -718,7 +718,7 @@ test_get_file_image(const char * test_banner,
 
     if(driver == H5FD_FAMILY)
         is_family_file = TRUE;
-    
+
     /* setup the file name */
     h5_fixname(FILENAME2[file_name_num], fapl, file_name, sizeof(file_name));
     VERIFY(HDstrlen(file_name)>0, "h5_fixname failed");
@@ -741,7 +741,7 @@ test_get_file_image(const char * test_banner,
     VERIFY(space_id >= 0, "H5Screate() failed");
 
     /* Create a dataset */
-    dset_id = H5Dcreate2(file_id, "dset 0", H5T_NATIVE_INT, space_id, 
+    dset_id = H5Dcreate2(file_id, "dset 0", H5T_NATIVE_INT, space_id,
                          H5P_DEFAULT, H5P_DEFAULT, H5P_DEFAULT);
     VERIFY(dset_id >=0, "H5Dcreate() failed");
 
@@ -750,7 +750,7 @@ test_get_file_image(const char * test_banner,
         data[i] = i;
     err = H5Dwrite(dset_id, H5T_NATIVE_INT, H5S_ALL, H5S_ALL, H5P_DEFAULT, (void *)data);
     VERIFY(err >= 0, "H5Dwrite() failed.");
-    
+
     /* Flush the file */
     err = H5Fflush(file_id, H5F_SCOPE_GLOBAL);
     VERIFY(err >= 0, "H5Fflush failed");
@@ -768,7 +768,7 @@ test_get_file_image(const char * test_banner,
     VERIFY(bytes_read == image_size, "H5Fget_file_image(2) failed.");
 
     /* Close dset and space */
-    err = H5Dclose(dset_id); 
+    err = H5Dclose(dset_id);
     VERIFY(err >= 0, "H5Dclose failed");
     err = H5Sclose(space_id);
     VERIFY(err >= 0, "H5Sclose failed");
@@ -860,8 +860,8 @@ test_get_file_image(const char * test_banner,
             file_size -= USERBLOCK_SIZE;
         }
 
-    /* with latest mods to truncate call in core file drive, 
-         * file size should match image size 
+    /* with latest mods to truncate call in core file drive,
+         * file size should match image size
          */
         VERIFY(file_size == image_size, "file size != image size.");
 
@@ -931,13 +931,13 @@ test_get_file_image(const char * test_banner,
     h5_clean_files(FILENAME2, fapl);
 
     /* discard the image buffer if it exists */
-    if(image_ptr != NULL) 
+    if(image_ptr != NULL)
         HDfree(image_ptr);
 
     /* discard the image buffer if it exists */
-    if(file_image_ptr != NULL) 
+    if(file_image_ptr != NULL)
         HDfree(file_image_ptr);
-    
+
     PASSED();
 
     return 0;
@@ -986,10 +986,10 @@ test_get_file_image_error_rejection(void)
     TESTING("H5Fget_file_image() error rejection");
 
     /************************ Sub-Test #1 ********************************/
-    /* set up a test file, and try to get its image with a buffer that is 
+    /* set up a test file, and try to get its image with a buffer that is
      * too small.  Call to H5Fget_file_image() should fail.
      *
-     * Since we have already done the necessary setup, verify that 
+     * Since we have already done the necessary setup, verify that
      * H5Fget_file_image() will fail with:
      *
      *        bad file id, or
@@ -1020,17 +1020,17 @@ test_get_file_image_error_rejection(void)
     VERIFY(space_id >= 0, "H5Screate() failed");
 
     /* Create a dataset */
-    dset_id = H5Dcreate2(file_id, "dset 0", H5T_NATIVE_INT, space_id, 
+    dset_id = H5Dcreate2(file_id, "dset 0", H5T_NATIVE_INT, space_id,
                          H5P_DEFAULT, H5P_DEFAULT, H5P_DEFAULT);
     VERIFY(dset_id >=0, "H5Dcreate() failed");
 
     /* write some data to the data set */
     for (i = 0; i < 100; i++)
         data[i] = i;
-    err = H5Dwrite(dset_id, H5T_NATIVE_INT, H5S_ALL, H5S_ALL, 
+    err = H5Dwrite(dset_id, H5T_NATIVE_INT, H5S_ALL, H5S_ALL,
                    H5P_DEFAULT, (void *)data);
     VERIFY(err >= 0, "H5Dwrite() failed.");
-    
+
     /* Flush the file */
     err = H5Fflush(file_id, H5F_SCOPE_GLOBAL);
     VERIFY(err >= 0, "H5Fflush failed");
@@ -1066,7 +1066,7 @@ test_get_file_image_error_rejection(void)
     VERIFY(bytes_read < 0, "H5Fget_file_image(4 -- test 1) succeeded.");
 
     /* Close dset and space */
-    err = H5Dclose(dset_id); 
+    err = H5Dclose(dset_id);
     VERIFY(err >= 0, "H5Dclose failed");
     err = H5Sclose(space_id);
     VERIFY(err >= 0, "H5Sclose failed");
@@ -1079,11 +1079,11 @@ test_get_file_image_error_rejection(void)
     h5_clean_files(FILENAME2, fapl_id);
 
     /* discard the image buffer if it exists */
-    if(image_ptr != NULL) 
+    if(image_ptr != NULL)
         HDfree(image_ptr);
 
     /************************** Test #2 **********************************/
-    /* set up a multi file driver test file, and try to get its image 
+    /* set up a multi file driver test file, and try to get its image
      * with H5Fget_file_image().  Attempt should fail.
      */
 
@@ -1130,7 +1130,7 @@ test_get_file_image_error_rejection(void)
     VERIFY(fapl_id >= 0, "H5Pcreate(2) failed");
 
     /* setup the fapl for the multi file driver */
-    err = H5Pset_fapl_multi(fapl_id, memb_map, memb_fapl, memb_name, 
+    err = H5Pset_fapl_multi(fapl_id, memb_map, memb_fapl, memb_name,
                             memb_addr, FALSE);
     VERIFY(err >= 0, "H5Pset_fapl_multi failed");
 
@@ -1149,17 +1149,17 @@ test_get_file_image_error_rejection(void)
     VERIFY(space_id >= 0, "H5Screate() failed");
 
     /* Create a dataset */
-    dset_id = H5Dcreate2(file_id, "dset 0", H5T_NATIVE_INT, space_id, 
+    dset_id = H5Dcreate2(file_id, "dset 0", H5T_NATIVE_INT, space_id,
                          H5P_DEFAULT, H5P_DEFAULT, H5P_DEFAULT);
     VERIFY(dset_id >=0, "H5Dcreate() failed");
 
     /* write some data to the data set */
     for (i = 0; i < 100; i++)
         data[i] = i;
-    err = H5Dwrite(dset_id, H5T_NATIVE_INT, H5S_ALL, H5S_ALL, 
+    err = H5Dwrite(dset_id, H5T_NATIVE_INT, H5S_ALL, H5S_ALL,
                    H5P_DEFAULT, (void *)data);
     VERIFY(err >= 0, "H5Dwrite() failed.");
-    
+
     /* Flush the file */
     err = H5Fflush(file_id, H5F_SCOPE_GLOBAL);
     VERIFY(err >= 0, "H5Fflush failed");
@@ -1171,7 +1171,7 @@ test_get_file_image_error_rejection(void)
     VERIFY(image_size == -1, "H5Fget_file_image(5) succeeded.");
 
     /* Close dset and space */
-    err = H5Dclose(dset_id); 
+    err = H5Dclose(dset_id);
     VERIFY(err >= 0, "H5Dclose failed");
     err = H5Sclose(space_id);
     VERIFY(err >= 0, "H5Sclose failed");
@@ -1184,11 +1184,11 @@ test_get_file_image_error_rejection(void)
     h5_clean_files(FILENAME2, fapl_id);
 
     /************************** Test #3 **********************************/
-    /* set up a split file driver test file, and try to get its image 
+    /* set up a split file driver test file, and try to get its image
      * with H5Fget_file_image().  Attempt should fail.
      */
 
-    /* create fapl */ 
+    /* create fapl */
     fapl_id = H5Pcreate(H5P_FILE_ACCESS);
     VERIFY(fapl_id >= 0, "H5Pcreate(3) failed");
 
@@ -1211,17 +1211,17 @@ test_get_file_image_error_rejection(void)
     VERIFY(space_id >= 0, "H5Screate() failed");
 
     /* Create a dataset */
-    dset_id = H5Dcreate2(file_id, "dset 0", H5T_NATIVE_INT, space_id, 
+    dset_id = H5Dcreate2(file_id, "dset 0", H5T_NATIVE_INT, space_id,
                          H5P_DEFAULT, H5P_DEFAULT, H5P_DEFAULT);
     VERIFY(dset_id >=0, "H5Dcreate() failed");
 
     /* write some data to the data set */
     for (i = 0; i < 100; i++)
         data[i] = i;
-    err = H5Dwrite(dset_id, H5T_NATIVE_INT, H5S_ALL, H5S_ALL, 
+    err = H5Dwrite(dset_id, H5T_NATIVE_INT, H5S_ALL, H5S_ALL,
                    H5P_DEFAULT, (void *)data);
     VERIFY(err >= 0, "H5Dwrite() failed.");
-    
+
     /* Flush the file */
     err = H5Fflush(file_id, H5F_SCOPE_GLOBAL);
     VERIFY(err >= 0, "H5Fflush failed");
@@ -1233,7 +1233,7 @@ test_get_file_image_error_rejection(void)
     VERIFY(image_size == -1, "H5Fget_file_image(6) succeeded.");
 
     /* Close dset and space */
-    err = H5Dclose(dset_id); 
+    err = H5Dclose(dset_id);
     VERIFY(err >= 0, "H5Dclose failed");
     err = H5Sclose(space_id);
     VERIFY(err >= 0, "H5Sclose failed");
@@ -1246,11 +1246,11 @@ test_get_file_image_error_rejection(void)
     h5_clean_files(FILENAME2, fapl_id);
 
     /************************** Test #4 **********************************/
-    /* set up a family file driver test file, and try to get its image 
+    /* set up a family file driver test file, and try to get its image
      * with H5Fget_file_image().  Attempt should fail.
      */
 
-    /* create fapl */ 
+    /* create fapl */
     fapl_id = H5Pcreate(H5P_FILE_ACCESS);
     VERIFY(fapl_id >= 0, "H5Pcreate(3) failed");
 
@@ -1271,17 +1271,17 @@ test_get_file_image_error_rejection(void)
     VERIFY(space_id >= 0, "H5Screate() failed");
 
     /* Create a dataset */
-    dset_id = H5Dcreate2(file_id, "dset 0", H5T_NATIVE_INT, space_id, 
+    dset_id = H5Dcreate2(file_id, "dset 0", H5T_NATIVE_INT, space_id,
                          H5P_DEFAULT, H5P_DEFAULT, H5P_DEFAULT);
     VERIFY(dset_id >=0, "H5Dcreate() failed");
 
     /* write some data to the data set */
     for (i = 0; i < 100; i++)
         data[i] = i;
-    err = H5Dwrite(dset_id, H5T_NATIVE_INT, H5S_ALL, H5S_ALL, 
+    err = H5Dwrite(dset_id, H5T_NATIVE_INT, H5S_ALL, H5S_ALL,
                    H5P_DEFAULT, (void *)data);
     VERIFY(err >= 0, "H5Dwrite() failed.");
-    
+
     /* Flush the file */
     err = H5Fflush(file_id, H5F_SCOPE_GLOBAL);
     VERIFY(err >= 0, "H5Fflush failed");
@@ -1293,7 +1293,7 @@ test_get_file_image_error_rejection(void)
     VERIFY(image_size == -1, "H5Fget_file_image(7) succeeded.");
 
     /* Close dset and space */
-    err = H5Dclose(dset_id); 
+    err = H5Dclose(dset_id);
     VERIFY(err >= 0, "H5Dclose failed");
     err = H5Sclose(space_id);
     VERIFY(err >= 0, "H5Sclose failed");
@@ -1304,7 +1304,7 @@ test_get_file_image_error_rejection(void)
 
     /* tidy up */
     h5_clean_files(FILENAME2, fapl_id);
-    
+
     PASSED();
 
     return 0;
@@ -1362,14 +1362,14 @@ main(void)
      } /* end for */
 
 #if 0
-    /* at present, H5Fget_file_image() rejects files opened with the 
+    /* at present, H5Fget_file_image() rejects files opened with the
      * family file driver, due to the addition of a driver info message
      * in the super block.  This message prevents the image being opened
-     * with any driver other than the family file driver, which sort of 
+     * with any driver other than the family file driver, which sort of
      * defeats the purpose of the get file image operation.
      *
      * While this issues is quite fixable, we don't have time or resources
-     * for this right now.  Once we do, the following code should be 
+     * for this right now.  Once we do, the following code should be
      * suitable for testing the fix.
      */
     /* test H5Fget_file_image() with family file driver */
@@ -1386,10 +1386,10 @@ main(void)
     /* Restore the default error handler (set in h5_reset()) */
     h5_restore_err();
 
-    if(errors) { 
-        HDprintf("***** %d File Image TEST%s FAILED! *****\n", 
-            errors, errors > 1 ? "S" : ""); 
-        return 1; 
+    if(errors) {
+        HDprintf("***** %d File Image TEST%s FAILED! *****\n",
+            errors, errors > 1 ? "S" : "");
+        return 1;
     }
 
     HDprintf("All File Image tests passed.\n");
diff --git a/test/filter_fail.c b/test/filter_fail.c
index 4be2547..e5187be 100644
--- a/test/filter_fail.c
+++ b/test/filter_fail.c
@@ -50,8 +50,8 @@ const H5Z_class2_t H5Z_FAIL_TEST[1] = {{
 /*-------------------------------------------------------------------------
  * Function:    filter_fail
  *
- * Purpose:     For testing library's behavior when a mandatory filter 
- *              fails to write a chunk. 
+ * Purpose:     For testing library's behavior when a mandatory filter
+ *              fails to write a chunk.
  *
  * Return:	Success:	Data chunk size
  *		Failure:	0
@@ -74,7 +74,7 @@ filter_fail(unsigned int flags, size_t H5_ATTR_UNUSED cd_nelmts,
         ret_value = nbytes;
     }  /* end if */
     else { /* Write data */
-        /* If it's the last chunk, pretend to fail. Otherwise, do nothing. */ 
+        /* If it's the last chunk, pretend to fail. Otherwise, do nothing. */
         if(*dst == 8 || *dst == 9) {
             ret_value = 0;
         } else {
@@ -90,14 +90,14 @@ filter_fail(unsigned int flags, size_t H5_ATTR_UNUSED cd_nelmts,
 /*-------------------------------------------------------------------------
  * Function:    test_filter_write_failure
  *
- * Purpose:     Tests the library's behavior when a mandate filter returns 
+ * Purpose:     Tests the library's behavior when a mandate filter returns
  *              failure.  There're only 5 chunks with each of them having
- *              2 integers.  The filter will fail in the last chunk.  The 
- *              dataset should release all resources even though the last 
+ *              2 integers.  The filter will fail in the last chunk.  The
+ *              dataset should release all resources even though the last
  *              chunk can't be flushed to file.  The file should close
  *              successfully.
  *
- * Return:  
+ * Return:
  *              Success:         0
  *              Failure:         -1
  *
@@ -107,7 +107,7 @@ filter_fail(unsigned int flags, size_t H5_ATTR_UNUSED cd_nelmts,
  * Modifications:
  *              Raymond Lu
  *              5 Oct 2010
- *              Test when the chunk cache is enable and disabled to make 
+ *              Test when the chunk cache is enable and disabled to make
  *              sure the library behaves properly.
  *-------------------------------------------------------------------------
  */
@@ -151,7 +151,7 @@ test_filter_write(char *file_name, hid_t my_fapl, hbool_t cache_enabled)
         TEST_ERROR
 
     /* create a dataset */
-    if((dataset = H5Dcreate2(file, DSET_NAME, H5T_NATIVE_INT, sid, H5P_DEFAULT, dcpl, H5P_DEFAULT)) < 0) TEST_ERROR 
+    if((dataset = H5Dcreate2(file, DSET_NAME, H5T_NATIVE_INT, sid, H5P_DEFAULT, dcpl, H5P_DEFAULT)) < 0) TEST_ERROR
 
     /* Initialize the write buffer */
     for(i = 0; i < DIM; i++)
@@ -160,7 +160,7 @@ test_filter_write(char *file_name, hid_t my_fapl, hbool_t cache_enabled)
     /* Write data.  If the chunk cache is enabled, H5Dwrite should succeed.  If it is
      * diabled, H5Dwrite should fail. */
     if(cache_enabled) {
-        if(H5Dwrite(dataset, H5T_NATIVE_INT, H5S_ALL, sid, H5P_DEFAULT, points) < 0) 
+        if(H5Dwrite(dataset, H5T_NATIVE_INT, H5S_ALL, sid, H5P_DEFAULT, points) < 0)
             TEST_ERROR
     } else {
         /* Data writing should fail */
@@ -194,7 +194,7 @@ test_filter_write(char *file_name, hid_t my_fapl, hbool_t cache_enabled)
             TEST_ERROR
     }
 
-    /* Even though H5Dclose or H5Dwrite fails, it should release all resources.  
+    /* Even though H5Dclose or H5Dwrite fails, it should release all resources.
      * So the file should close successfully. */
     if(H5Fclose (file) < 0) TEST_ERROR
 
@@ -215,11 +215,11 @@ error:
 /*-------------------------------------------------------------------------
  * Function:    test_filter_read
  *
- * Purpose:     Tests the library's behavior when a mandate filter returns 
- *              failure.  The first 4 chunks should be in the file.  The 
+ * Purpose:     Tests the library's behavior when a mandate filter returns
+ *              failure.  The first 4 chunks should be in the file.  The
  *              last chunk should not.
  *
- * Return:  
+ * Return:
  *              Success:         0
  *              Failure:         -1
  *
@@ -305,7 +305,7 @@ test_filter_read(char *file_name, hid_t my_fapl)
     if(H5Dread(dataset, H5T_NATIVE_INT, H5S_ALL, sid, H5P_DEFAULT, rbuf) < 0)
         TEST_ERROR
 
-    /* Check that the values read are the same as the values written. 
+    /* Check that the values read are the same as the values written.
      * The last chunk should not be in the file. */
     for(i = 0; i < DIM; i+=2) {
         if(i < DIM-2 && rbuf[i] != i) {
@@ -344,11 +344,11 @@ error:
 /*-------------------------------------------------------------------------
  * Function:    main
  *
- * Purpose:     Tests the library's behavior when a mandate filter returns 
+ * Purpose:     Tests the library's behavior when a mandate filter returns
  *              failure.
  *
  * Return:      EXIT_SUCCESS/EXIT_FAILURE
- * 
+ *
  * Programmer:  Raymond Lu
  *              25 August 2010
  *
diff --git a/test/filter_plugin1_dsets.c b/test/filter_plugin1_dsets.c
index b74e086..a9a53ae 100644
--- a/test/filter_plugin1_dsets.c
+++ b/test/filter_plugin1_dsets.c
@@ -69,7 +69,7 @@ add_sub_value(unsigned int flags, size_t cd_nelmts, const unsigned int *cd_value
     /* Check that permanent parameters are set correctly */
     if (cd_values[0] > 9)
         return 0;
-  
+
     value = (int)cd_values[0];
 
     if (flags & H5Z_FLAG_REVERSE) {
diff --git a/test/flush1.c b/test/flush1.c
index ac5f9ef..04f24f7 100644
--- a/test/flush1.c
+++ b/test/flush1.c
@@ -99,7 +99,7 @@ create_file(const char *filename, hid_t fapl_id, hbool_t swmr)
 
     if(H5Gclose(top_gid) < 0)
         STACK_ERROR
-    
+
     return fid;
 
 error:
@@ -185,7 +185,7 @@ error:
  *              a variety of situations.
  *
  *              Part 1 of a two-part H5Fflush() test.
- *   
+ *
  * Return:      EXIT_SUCCESS/EXIT_FAILURE
  *
  * Programmer:	Robb Matzke
diff --git a/test/flush2.c b/test/flush2.c
index a6acb41..5fc716b 100644
--- a/test/flush2.c
+++ b/test/flush2.c
@@ -354,7 +354,7 @@ main(void)
 
     /* TEST 6 */
     /* Check the case where the file was flushed, but more data was
-     * added afterward and then flushed (w/SWMR) 
+     * added afterward and then flushed (w/SWMR)
      */
     TESTING("H5Fflush (part2 with flush and later addition and another flush + SWMR)");
     if(vfd_supports_swmr) {
diff --git a/test/flushrefresh.c b/test/flushrefresh.c
index 20a4ba4..2db1d6b 100644
--- a/test/flushrefresh.c
+++ b/test/flushrefresh.c
@@ -15,10 +15,10 @@
  * Programmer: Mike McGreevy
  *             June 30, 2010
  *
- * Purpose: This test file contains routines used to test flushing and 
- *          refreshing individual objects' metadata from the cache. 
- *          
- *          Note: This file should NOT be run manually. Instead, invoke it 
+ * Purpose: This test file contains routines used to test flushing and
+ *          refreshing individual objects' metadata from the cache.
+ *
+ *          Note: This file should NOT be run manually. Instead, invoke it
  *          via its associated test script, testflushrefresh.sh
  *
  */
@@ -119,12 +119,12 @@ herr_t end_verification(void);
  * Function:    main
  *
  * Purpose:     This function coordinates the test of flush/refresh
- *              functionality verification. It accepts either one, two or 
+ *              functionality verification. It accepts either one, two or
  *              no command line parameters. The main test routine runs
  *              with no command line parameters specified, while verification
  *              routines run with one or two command line parameters.
- * 
- *              Note: This program should not be run manually, as the 
+ *
+ *              Note: This program should not be run manually, as the
  *              test is controlled by the testflushrefresh.sh script. Running
  *              the flushrefresh program manually will result in failure, as
  *              it will time out waiting for a signal from the test script
@@ -137,7 +137,7 @@ herr_t end_verification(void);
  *
  *-------------------------------------------------------------------------
  */
-int main(int argc, const char *argv[]) 
+int main(int argc, const char *argv[])
 {
     /* Variables */
     const char *envval = NULL;
@@ -148,8 +148,8 @@ int main(int argc, const char *argv[])
 
     /* Parse command line options */
     if(argc == 1) {
-        /* No arguments supplied. Run main test routines if 
-         * using sec2 or stdio driver, otherwise don't run 
+        /* No arguments supplied. Run main test routines if
+         * using sec2 or stdio driver, otherwise don't run
          * anything. */
 
         /* Determine driver being used */
@@ -161,7 +161,7 @@ int main(int argc, const char *argv[])
         } /* end if */
         else {
             HDfprintf(stdout, "Skipping all flush/refresh tests (only run with SWMR-enabled file drivers).\n");
-            
+
             /* Test script is expecting some signals, so send them out to end it. */
             if(end_verification() < 0) TEST_ERROR;
             if(end_verification() < 0) TEST_ERROR;
@@ -202,29 +202,29 @@ error:
  *
  *-------------------------------------------------------------------------
  */
-herr_t test_flush(void) 
+herr_t test_flush(void)
 {
     /**************************************************************************
      *
      * Test Description:
      *
-     * This test will build an HDF5 file with several objects in a varying 
+     * This test will build an HDF5 file with several objects in a varying
      * hierarchical layout. It will then attempt to flush the objects
      * in the file one by one, individually, using the four H5*flush
-     * routines (D,G,T, and O). After each call to either create or flush an 
+     * routines (D,G,T, and O). After each call to either create or flush an
      * object, a series of verifications will occur on each object in the file.
      *
      * Each verification consists of spawning off a new process and determining
-     * if the object can be opened and its information retreived in said 
-     * alternate process. It reports the results, which are compared to an 
+     * if the object can be opened and its information retreived in said
+     * alternate process. It reports the results, which are compared to an
      * expected value (either that the object can be found on disk, or that it
      * cannot).
      *
      * Note that to spawn a verification, this program sends a signal (by creating
-     * a file on disk) to the test script controlling it, indicating how to 
+     * a file on disk) to the test script controlling it, indicating how to
      * run the verification.
-     * 
-     * Implementation is funky, but basically, an example: 
+     *
+     * Implementation is funky, but basically, an example:
      *
      * Step 1. Dataset is created.
      * Step 2. Verify that dataset can't be opened by separate process, as
@@ -233,14 +233,14 @@ herr_t test_flush(void)
      * Step 4. Verify that group can't be opened by separate process.
      * Step 5. H5Gflush is called on the group.
      * Step 6. Verify that group CAN be opened, but dataset still has
-     *         yet to hit disk, and CANNOT be opened. Success! Only the group 
+     *         yet to hit disk, and CANNOT be opened. Success! Only the group
      *         was flushed.
      *
      **************************************************************************/
 
     /**************************************************************************
       * Generated Test File will look like this:
-      * 
+      *
       * GROUP "/"
       *   DATASET "Dataset1"
       *   GROUP "Group1" {
@@ -265,14 +265,14 @@ herr_t test_flush(void)
 
     /* Cleanup any old error or signal files */
     CLEANUP_FILES;
-    
+
     /* ================ */
     /* CREATE TEST FILE */
     /* ================ */
 
     /* Create file, open root group - have to use latest file format for SWMR */
     if((fapl = H5Pcreate(H5P_FILE_ACCESS)) < 0) TEST_ERROR;
-    if(H5Pset_libver_bounds(fapl, H5F_LIBVER_LATEST, H5F_LIBVER_LATEST) < 0) TEST_ERROR; 
+    if(H5Pset_libver_bounds(fapl, H5F_LIBVER_LATEST, H5F_LIBVER_LATEST) < 0) TEST_ERROR;
     if((fid = H5Fcreate(FILENAME, H5F_ACC_TRUNC|H5F_ACC_SWMR_WRITE, H5P_DEFAULT, fapl)) < 0) TEST_ERROR;
     if((rid = H5Gopen2(fid, "/", H5P_DEFAULT)) < 0) TEST_ERROR;
 
@@ -341,7 +341,7 @@ herr_t test_flush(void)
     if(run_flush_verification_process(T2, NOT_FLUSHED) != 0) TEST_ERROR;
     if(run_flush_verification_process(T3, NOT_FLUSHED) != 0) TEST_ERROR;
 
-    /* Flush Group1 and Verify it is recently flushed, and nothing 
+    /* Flush Group1 and Verify it is recently flushed, and nothing
      * else has changed. */
     if((status = H5Gflush(gid)) < 0) TEST_ERROR;
     if(run_flush_verification_process(RG, FLUSHED) != 0) TEST_ERROR;
@@ -355,7 +355,7 @@ herr_t test_flush(void)
     if(run_flush_verification_process(T2, NOT_FLUSHED) != 0) TEST_ERROR;
     if(run_flush_verification_process(T3, NOT_FLUSHED) != 0) TEST_ERROR;
 
-    /* Flush Group2 and Verify it is recently flushed, and nothing 
+    /* Flush Group2 and Verify it is recently flushed, and nothing
      * else has changed. */
     if((status = H5Gflush(gid2)) < 0) TEST_ERROR;
     if(run_flush_verification_process(RG, FLUSHED) != 0) TEST_ERROR;
@@ -440,7 +440,7 @@ herr_t test_flush(void)
     if(run_flush_verification_process(T3, NOT_FLUSHED) != 0) TEST_ERROR;
 
     PASSED();
-    
+
     /* ============= */
     /* FLUSH OBJECTS */
     /* ============= */
@@ -490,7 +490,7 @@ herr_t test_flush(void)
     PASSED();
 
     /* ================== */
-    /* Cleanup and Return */  
+    /* Cleanup and Return */
     /* ================== */
     if(H5Pclose(fapl) < 0) TEST_ERROR;
     if(H5Gclose(gid) < 0) TEST_ERROR;
@@ -515,7 +515,7 @@ error:
 /*-------------------------------------------------------------------------
  * Function:    test_refresh
  *
- * Purpose:     This function tests refresh (evict/reload) of individual 
+ * Purpose:     This function tests refresh (evict/reload) of individual
  *              objects' metadata from the metadata cache.
  *
  * Return:      0 on Success, 1 on Failure
@@ -525,27 +525,27 @@ error:
  *
  *-------------------------------------------------------------------------
  */
-herr_t test_refresh(void) 
+herr_t test_refresh(void)
 {
     /**************************************************************************
      *
      * Test Description:
      *
-     * This test will build an HDF5 file with several objects in a varying 
+     * This test will build an HDF5 file with several objects in a varying
      * hierarchical layout. It will then flush the entire file to disk. Then,
      * an attribute will be added to each object in the file.
-     * 
+     *
      * One by one, this process will flush each object to disk, individually.
      * It will also be coordinating with another process, which will open
      * the object before it is flushed by this process, and then refresh the
      * object after it's been flushed, comparing the before and after object
      * information to ensure that they are as expected. (i.e., most notably,
-     * that an attribute has been added, and is only visible after a 
+     * that an attribute has been added, and is only visible after a
      * successful call to a H5*refresh function).
-     * 
-     * As with the flush case, the implemention is a bit tricky as it's 
+     *
+     * As with the flush case, the implemention is a bit tricky as it's
      * dealing with signals going back and forth between the two processes
-     * to ensure the timing is correct, but basically, an example: 
+     * to ensure the timing is correct, but basically, an example:
      *
      * Step 1. Dataset is created.
      * Step 2. Dataset is flushed.
@@ -555,7 +555,7 @@ herr_t test_refresh(void)
      * Step 5. This process flushes the dataset again (with Attribute attached).
      * Step 6. The other process calls H5Drefresh, which should evict/reload
      *         the object's metadata, and thus pick up the attribute that's
-     *         attached to it. Most other before/after object information is 
+     *         attached to it. Most other before/after object information is
      *         compared for sanity as well.
      * Step 7. Rinse and Repeat for each object in the file.
      *
@@ -563,7 +563,7 @@ herr_t test_refresh(void)
 
     /**************************************************************************
       * Generated Test File will look like this:
-      * 
+      *
       * GROUP "/"
       *   DATASET "Dataset1"
       *   GROUP "Group1" {
@@ -755,7 +755,7 @@ herr_t test_refresh(void)
     PASSED();
 
     /* ================== */
-    /* Cleanup and Return */  
+    /* Cleanup and Return */
     /* ================== */
 
     /* Close Stuff */
@@ -791,8 +791,8 @@ error:
  *
  * Purpose:     This function is used to communicate with the test script
  *              in order to spawn off a process to verify that a flush
- *              of an individual object was successful. 
- * 
+ *              of an individual object was successful.
+ *
  * Return:      0 on Success, 1 on Failure
  *
  * Programmer:  Mike McGreevy
@@ -800,7 +800,7 @@ error:
  *
  *-------------------------------------------------------------------------
  */
-herr_t run_flush_verification_process(const char * obj_pathname, const char * expected) 
+herr_t run_flush_verification_process(const char * obj_pathname, const char * expected)
 {
     HDremove(SIGNAL_FROM_SCRIPT);
 
@@ -825,10 +825,10 @@ error:
  * Function:    flush_verification
  *
  * Purpose:     This function tries to open target object in the test file.
- *              It compares the success of the open function to the expected 
+ *              It compares the success of the open function to the expected
  *              value, and succeeds if they are equal and fails if they differ.
  *
- *              Note that full path to the object must be provided as the 
+ *              Note that full path to the object must be provided as the
  *              obj_pathname argument.
  *
  * Return:      0 on Success, 1 on Failure
@@ -838,7 +838,7 @@ error:
  *
  *-------------------------------------------------------------------------
  */
-herr_t flush_verification(const char * obj_pathname, const char * expected) 
+herr_t flush_verification(const char * obj_pathname, const char * expected)
 {
     /* Variables */
     hid_t oid = -1, fid = -1;
@@ -887,7 +887,7 @@ error:
  * Purpose:     This function is used to communicate with the test script
  *              in order to spawn off a process which will test the
  *              H5*refresh routine.
- * 
+ *
  * Return:      0 on Success, 1 on Failure
  *
  * Programmer:  Mike McGreevy
@@ -895,14 +895,14 @@ error:
  *
  *-------------------------------------------------------------------------
  */
-herr_t start_refresh_verification_process(const char * obj_pathname) 
+herr_t start_refresh_verification_process(const char * obj_pathname)
 {
     HDremove(SIGNAL_BETWEEN_PROCESSES_1);
 
-    /* Send Signal to SCRIPT indicating that it should kick off a refresh 
+    /* Send Signal to SCRIPT indicating that it should kick off a refresh
        verification process */
     h5_send_message(SIGNAL_TO_SCRIPT, obj_pathname, NULL);
-    
+
     /* Wait for Signal from VERIFICATION PROCESS indicating that it's opened the
        target object and ready for MAIN PROCESS to modify it */
     if(h5_wait_message(SIGNAL_BETWEEN_PROCESSES_1) < 0) TEST_ERROR;
@@ -922,10 +922,10 @@ error:
  * Function:    end_refresh_verification_process
  *
  * Purpose:     This function is used to communicate with the verification
- *              process spawned by the start_refresh_verification_process 
+ *              process spawned by the start_refresh_verification_process
  *              function. It gives it the go-ahead to call H5*refresh
  *              on an object and conlcude the refresh verification.
- * 
+ *
  * Return:      0 on Success, 1 on Failure
  *
  * Programmer:  Mike McGreevy
@@ -933,8 +933,8 @@ error:
  *
  *-------------------------------------------------------------------------
  */
-herr_t end_refresh_verification_process(void) 
-{ 
+herr_t end_refresh_verification_process(void)
+{
     HDremove(SIGNAL_FROM_SCRIPT);
 
     /* Send Signal to REFRESH VERIFICATION PROCESS indicating that the object
@@ -974,7 +974,7 @@ error:
  *
  *-------------------------------------------------------------------------
  */
-herr_t refresh_verification(const char * obj_pathname) 
+herr_t refresh_verification(const char * obj_pathname)
 {
     /* Variables */
     hid_t oid,fid,status = 0;
@@ -985,7 +985,7 @@ herr_t refresh_verification(const char * obj_pathname)
     int tries = 800, sleep_tries = 400;
     int token_cmp;
     hbool_t ok = FALSE;
-    
+
     HDremove(SIGNAL_BETWEEN_PROCESSES_2);
 
     /* Open Object */
@@ -1002,16 +1002,16 @@ herr_t refresh_verification(const char * obj_pathname)
     if(flushed_oinfo.num_attrs != 0)
         PROCESS_ERROR;
 
-    /* Send Signal to MAIN PROCESS indicating that it can go ahead and modify the 
+    /* Send Signal to MAIN PROCESS indicating that it can go ahead and modify the
         object. */
     h5_send_message(SIGNAL_BETWEEN_PROCESSES_1, obj_pathname, NULL);
 
-    /* Wait for Signal from MAIN PROCESS indicating that it's modified the 
+    /* Wait for Signal from MAIN PROCESS indicating that it's modified the
         object and we can run verification now. */
     if(h5_wait_message(SIGNAL_BETWEEN_PROCESSES_2) < 0) PROCESS_ERROR;
 
-    /* Get object info again. This will NOT reflect what's on disk, only what's 
-       in the cache. Thus, all values will be unchanged from above, despite 
+    /* Get object info again. This will NOT reflect what's on disk, only what's
+       in the cache. Thus, all values will be unchanged from above, despite
        newer information being on disk. */
     if((status = H5Oget_info3(oid, &refreshed_oinfo, H5O_INFO_BASIC|H5O_INFO_NUM_ATTRS)) < 0) PROCESS_ERROR;
     if((status = H5Oget_native_info(oid, &refreshed_ninfo, H5O_NATIVE_INFO_HDR)) < 0) PROCESS_ERROR;
@@ -1105,7 +1105,7 @@ error:
  *              processes to see if they've succeeded. It checks for the
  *              existance of flushrefresh_ERROR file. If present, that indicates
  *              an external verification process has failed, and this function
- *              thus fails as well. If not present, then nothing else has 
+ *              thus fails as well. If not present, then nothing else has
  *              failed, and this function succeeds.
  *
  * Return:      0 on Success, 1 on Failure
@@ -1115,7 +1115,7 @@ error:
  *
  *-------------------------------------------------------------------------
  */
-herr_t check_for_errors(void) 
+herr_t check_for_errors(void)
 {
     FILE * file;
 
@@ -1131,24 +1131,24 @@ herr_t check_for_errors(void)
 
 /*-------------------------------------------------------------------------
  * Function:    end_verification
- * 
- * Purpose:     Tells test script that verification routines are completed and 
- *              that the test can wrap up. 
+ *
+ * Purpose:     Tells test script that verification routines are completed and
+ *              that the test can wrap up.
  *
  * Return:      void
  *
  * Programmer:  Mike McGreevy
  *              July 16, 2010
- * 
+ *
  *-------------------------------------------------------------------------
  */
-herr_t end_verification(void) 
+herr_t end_verification(void)
 {
     HDremove(SIGNAL_FROM_SCRIPT);
 
     /* Send Signal to SCRIPT to indicate that we're done with verification. */
     h5_send_message(SIGNAL_TO_SCRIPT, "VERIFICATION_DONE", "VERIFICATION_DONE");
-    
+
     /* Wait for Signal from SCRIPT indicating that we can continue. */
     if(h5_wait_message(SIGNAL_FROM_SCRIPT) < 0) TEST_ERROR;
 
diff --git a/test/gen_bad_compound.c b/test/gen_bad_compound.c
index c52eb95..292659c 100644
--- a/test/gen_bad_compound.c
+++ b/test/gen_bad_compound.c
@@ -61,7 +61,7 @@ int main()
     aid = H5Acreate(gid, "attr", cmpd_dt, sid, H5P_DEFAULT);
     assert(aid > 0);
 
-    /* Commit the datatype */ 
+    /* Commit the datatype */
     ret = H5Tcommit(file, "cmpnd", cmpd_dt);
     assert(ret >= 0);
 
diff --git a/test/gen_bad_offset.c b/test/gen_bad_offset.c
index 82e94cd..b485e36 100644
--- a/test/gen_bad_offset.c
+++ b/test/gen_bad_offset.c
@@ -28,8 +28,8 @@
 /*-------------------------------------------------------------------------
  * Function:	main
  *
- *              Generate an HDF5 file with groups, datasets and symbolic links. 
- *              After the file is generated, write bad offset values to 
+ *              Generate an HDF5 file with groups, datasets and symbolic links.
+ *              After the file is generated, write bad offset values to
  *              the heap at 3 locations in the file:
  *              (A) Open the file:
  *                  fd = HDopen(TESTFILE, O_RDWR, 0663);
@@ -37,7 +37,7 @@
  *                  (1) HDlseek(fd, (HDoff_t)880, SEEK_SET);
  *                      "/group1/group2": replace heap offset "8" by bad offset
  *                  (2) HDlseek(fd, (HDoff_t)1512, SEEK_SET);
- *                      "/dsetA": replace name offset into private heap "72" by bad offset 
+ *                      "/dsetA": replace name offset into private heap "72" by bad offset
  *                  (3) HDlseek(fd, (HDoff_t)1616, SEEK_SET);
  *                      /soft_one: replace link value offset in the scratch pad "32" by bad offset
  *              (C) Write the bad offset value to the file for (1), (2) and (3):
@@ -98,7 +98,7 @@ main(void)
     if(H5Fclose(fid) < 0)
         FAIL_STACK_ERROR
 
-    /* 
+    /*
      * Write bad offset values at 3 locations in the file
      */
 
diff --git a/test/gen_bogus.c b/test/gen_bogus.c
index 237b024..1ab18a4 100644
--- a/test/gen_bogus.c
+++ b/test/gen_bogus.c
@@ -37,12 +37,12 @@
 #ifdef H5O_ENABLE_BOGUS
 
 /*
- * Create datasets in the location (in "/" or "/group") with 
+ * Create datasets in the location (in "/" or "/group") with
  *   message id: (a) H5O_BOGUS_VALID_ID or (b)H5O_BOGUS_INVALID_ID
  *   and various unknown message flags
  */
 static int
-generate_datasets(hid_t loc_id, unsigned bogus_id) 
+generate_datasets(hid_t loc_id, unsigned bogus_id)
 {
     hid_t sid = -1;             /* Dataspace ID */
     hid_t dcpl = -1;            /* Dataset creation property list ID */
diff --git a/test/gen_bounds.c b/test/gen_bounds.c
index fe05a1e..2f696e6 100644
--- a/test/gen_bounds.c
+++ b/test/gen_bounds.c
@@ -27,8 +27,8 @@
  *              that they can or cannot read particular file format.
  */
 
-/* 
- * Add two routines gen_ref_files() and gen_sel_files() to generate the 
+/*
+ * Add two routines gen_ref_files() and gen_sel_files() to generate the
  * following test files:
  *
  *  (1) gen_ref_files():
@@ -42,7 +42,7 @@
  *      bounds_sel_v112_v112.h5
  *      bounds_sel_v110_v110.h5
  *
- * These test files will be copied to 1.12, 1.10 and 1.8 libraries for 
+ * These test files will be copied to 1.12, 1.10 and 1.8 libraries for
  * compatibility testing.
  */
 #include "h5test.h"
@@ -649,25 +649,25 @@ error:
 
 /***********************************************************************
  * gen_sel_files() is used to create the following test files:
- *      bounds_sel_earliest_latest.h5 
- *      bounds_sel_latest_latest.h5 
- *      bounds_sel_v112_v112.h5 
- *      bounds_sel_v110_v110.h5 
+ *      bounds_sel_earliest_latest.h5
+ *      bounds_sel_latest_latest.h5
+ *      bounds_sel_v112_v112.h5
+ *      bounds_sel_v110_v110.h5
  *
  * File contents for:
  * --bounds_sel_earliest_latest.h5
  * --bounds_sel_latest_latest.h5
  * --bounds_sel_v112_v112.h5
- *      --each file contains 3 datasets with old region reference type 
- *          (1) Sel_ex32_reg_dset: 
+ *      --each file contains 3 datasets with old region reference type
+ *          (1) Sel_ex32_reg_dset:
  *          --regular hyperslab selection exceeding 32 bits integer limit
  *          (2) Sel_ex32_irr_dset:
  *          --irregular hyperslab selection exceeding 32 bits integer limit
- *          (3) Sel_ex32_pt_dset: 
+ *          (3) Sel_ex32_pt_dset:
  *          --point selection exceeding 32 bits integer limit
  *
  * File contents for:
- * --bounds_ref_v110_v110.h5 
+ * --bounds_ref_v110_v110.h5
  *      (1) Sel_ex32_reg_dset: a dataset with old region reference type
  *          --regular hyperslab selection exceeding 32 bits integer limit
  *      (2) Sel_ex32_irr_dset: does not exist, cannot be created
@@ -696,7 +696,7 @@ static herr_t gen_sel_files(const char *filename, H5F_libver_t low_bound,  H5F_l
     hdset_reg_ref_t ref_wbuf[1];    /* Buffer for dataset region reference */
 
     /*
-     * Create test file, attribute, group and dataset 
+     * Create test file, attribute, group and dataset
      */
 
    /* Create the test file */
@@ -720,7 +720,7 @@ static herr_t gen_sel_files(const char *filename, H5F_libver_t low_bound,  H5F_l
         TEST_ERROR;
 
     /* Create file access property list */
-    if((fapl = H5Pcreate(H5P_FILE_ACCESS)) < 0) 
+    if((fapl = H5Pcreate(H5P_FILE_ACCESS)) < 0)
         TEST_ERROR;
 
     /* Set to use the low/high bounds in fapl */
@@ -770,7 +770,7 @@ static herr_t gen_sel_files(const char *filename, H5F_libver_t low_bound,  H5F_l
 
         if(H5Dclose(ref_did) < 0)
             TEST_ERROR;
-    } 
+    }
 
     /* Generate irregular hyperslab exceeding 32 */
     ref_start = 8;
@@ -825,7 +825,7 @@ static herr_t gen_sel_files(const char *filename, H5F_libver_t low_bound,  H5F_l
 
         if(H5Dclose(ref_did) < 0)
             TEST_ERROR;
-    } 
+    }
 
     /* Closing */
     if(H5Sclose(ref_sid) < 0)
@@ -858,30 +858,30 @@ error:
 
 /***********************************************************************
  * gen_ref_files() is used to create the following test files:
- *      bounds_ref_earliest_latest.h5 
- *      bounds_ref_latest_latest.h5 
- *      bounds_ref_v110_v110.h5 
- *      bounds_ref_v18_v18.h5 
+ *      bounds_ref_earliest_latest.h5
+ *      bounds_ref_latest_latest.h5
+ *      bounds_ref_v110_v110.h5
+ *      bounds_ref_v18_v18.h5
  *
  * File contents for:
  * --bounds_ref_earliest_latest.h5
  * --bounds_ref_latest_latest.h5
  * --bounds_ref_v112_v112.h5
  *      (1) Revised_refs_dset: a dataset created with the revised reference type
- *          --attribute reference 
+ *          --attribute reference
  *          --object reference
  *          --dataset region reference
- *      (2) Old_ref_object_dset: 
+ *      (2) Old_ref_object_dset:
  *          --a dataset created with the old object reference type
- *      (3) Old_ref_region_dset: 
+ *      (3) Old_ref_region_dset:
  *          --a dataset created with the old dataset region reference type
  *
  * File contents for:
- * --bounds_ref_v110_v110.h5 
- * --bounds_ref_v18_v18.h5 
- *      (1) Old_ref_object_dset: 
+ * --bounds_ref_v110_v110.h5
+ * --bounds_ref_v18_v18.h5
+ *      (1) Old_ref_object_dset:
  *          --a dataset created with the old object reference type
- *      (2) Old_ref_region_dset: 
+ *      (2) Old_ref_region_dset:
  *          --a dataset created with the old dataset region reference type
  *
  * Return: SUCCEED/FAIL
@@ -912,7 +912,7 @@ static herr_t gen_ref_files(const char *filename, H5F_libver_t low_bound,  H5F_l
     unsigned i;             /* Local index variable */
 
     /*
-     * Create test file, attribute, group and dataset 
+     * Create test file, attribute, group and dataset
      */
 
     if((dwbuf = HDcalloc(sizeof(unsigned), 100)) == NULL)
@@ -968,7 +968,7 @@ static herr_t gen_ref_files(const char *filename, H5F_libver_t low_bound,  H5F_l
         HDfree(dwbuf);
         dwbuf = NULL;
     }
-    
+
     /* Create file access property list */
     if((fapl = H5Pcreate(H5P_FILE_ACCESS)) < 0) TEST_ERROR;
 
@@ -980,7 +980,7 @@ static herr_t gen_ref_files(const char *filename, H5F_libver_t low_bound,  H5F_l
     if((fid = H5Fopen(filename, H5F_ACC_RDWR, fapl)) <0)
         TEST_ERROR;
 
-    /* 
+    /*
      * Create the revised and old references in the file
      */
 
@@ -1080,7 +1080,7 @@ static herr_t gen_ref_files(const char *filename, H5F_libver_t low_bound,  H5F_l
         TEST_ERROR;
     if(H5Sclose(sid) < 0)
         TEST_ERROR;
-    if(H5Pclose(fapl) < 0) 
+    if(H5Pclose(fapl) < 0)
         TEST_ERROR;
     if(H5Fclose(fid) < 0)
         TEST_ERROR;
@@ -1120,7 +1120,7 @@ int main(void)
     if (gen_v18_v18() < 0) TEST_ERROR;
 
 
-    /* 
+    /*
      * Files generated via gen_ref_files()
      */
 
@@ -1144,7 +1144,7 @@ int main(void)
     if(gen_ref_files(FILENAME_REF_V18_V18, H5F_LIBVER_V18, H5F_LIBVER_V18) < 0)
         TEST_ERROR;
 
-    /* 
+    /*
      * Files generated via gen_sel_files()
      */
 
diff --git a/test/gen_filespace.c b/test/gen_filespace.c
index f4a4f3f..bf49b7b 100644
--- a/test/gen_filespace.c
+++ b/test/gen_filespace.c
@@ -40,7 +40,7 @@ const char *FILENAMES[] = {
  * Move these files to 1.8 branch for compatibility testing:
  * test_filespace_compatible() in test/tfile.c will use these files.
  *
- * Copy these files from the 1.8 branch back to the trunk for 
+ * Copy these files from the 1.8 branch back to the trunk for
  * compatibility testing via test_filespace_round_compatible() in test/tfile.c.
  *
  */
diff --git a/test/gen_filters.c b/test/gen_filters.c
index fa66078..9764830 100644
--- a/test/gen_filters.c
+++ b/test/gen_filters.c
@@ -29,9 +29,9 @@ static size_t filter_bogus(unsigned int flags, size_t cd_nelmts,
  * Function:	create_file_with_bogus_filter
  *
  * Purpose:	Create a dataset with the fletcher filter.
- *	        This function is used to create the test file `test_filters.h5' 
- *              which has a dataset with the "fletcher" I/O filter.  This dataset 
- *              will be used to verify the correct behavior of the library in 
+ *	        This function is used to create the test file `test_filters.h5'
+ *              which has a dataset with the "fletcher" I/O filter.  This dataset
+ *              will be used to verify the correct behavior of the library in
  *              the test "dsets"
  *
  * Return:	Success:	0
@@ -168,7 +168,7 @@ create_file_with_bogus_filter(void)
     /* create dcpl  */
     if((dcpl = H5Pcreate(H5P_DATASET_CREATE)) < 0) goto error;
 
-    /* create chunking */ 
+    /* create chunking */
     if(H5Pset_chunk(dcpl, rank, chunk_dims) < 0) goto error;
 
     /* register bogus filter */
diff --git a/test/gen_plist.c b/test/gen_plist.c
index 8fc8a05..b6f5597 100644
--- a/test/gen_plist.c
+++ b/test/gen_plist.c
@@ -37,7 +37,7 @@ main(void)
     hid_t acpl1;	       	/* attribute create prop. list */
 
     herr_t ret = 0;
-    hsize_t chunk_size = 16384;	/* chunk size */ 
+    hsize_t chunk_size = 16384;	/* chunk size */
     int fill = 2;            /* Fill value */
     hsize_t max_size[1];        /* data space maximum size */
     size_t nslots = 521 * 2;
@@ -129,22 +129,22 @@ main(void)
         assert(ret > 0);
 
     max_size[0] = 100;
-    if((ret = H5Pset_external(dcpl1, "ext1.data", (off_t)0, 
+    if((ret = H5Pset_external(dcpl1, "ext1.data", (off_t)0,
                          (hsize_t)(max_size[0] * sizeof(int)/4))) < 0)
         assert(ret > 0);
-    if((ret = H5Pset_external(dcpl1, "ext2.data", (off_t)0, 
+    if((ret = H5Pset_external(dcpl1, "ext2.data", (off_t)0,
                          (hsize_t)(max_size[0] * sizeof(int)/4))) < 0)
         assert(ret > 0);
-    if((ret = H5Pset_external(dcpl1, "ext3.data", (off_t)0, 
+    if((ret = H5Pset_external(dcpl1, "ext3.data", (off_t)0,
                          (hsize_t)(max_size[0] * sizeof(int)/4))) < 0)
         assert(ret > 0);
-    if((ret = H5Pset_external(dcpl1, "ext4.data", (off_t)0, 
+    if((ret = H5Pset_external(dcpl1, "ext4.data", (off_t)0,
                          (hsize_t)(max_size[0] * sizeof(int)/4))) < 0)
         assert(ret > 0);
 
     if((ret = encode_plist(dcpl1, little_endian, word_length, "testfiles/plist_files/dcpl_")) < 0)
         assert(ret > 0);
-        
+
     /* release resource */
     if((ret = H5Pclose(dcpl1)) < 0)
          assert(ret > 0);
@@ -156,13 +156,13 @@ main(void)
 
     if((ret = encode_plist(dapl1, little_endian, word_length, "testfiles/plist_files/def_dapl_")) < 0)
         assert(ret > 0);
-        
+
     if((ret = H5Pset_chunk_cache(dapl1, nslots, nbytes, w0)) < 0)
         assert(ret > 0);
 
     if((ret = encode_plist(dapl1, little_endian, word_length, "testfiles/plist_files/dapl_")) < 0)
         assert(ret > 0);
-        
+
     /* release resource */
     if((ret = H5Pclose(dapl1)) < 0)
          assert(ret > 0);
@@ -197,7 +197,7 @@ main(void)
 
     if((ret = encode_plist(dxpl1, little_endian, word_length, "testfiles/plist_files/dxpl_")) < 0)
         assert(ret > 0);
-        
+
     /* release resource */
     if((ret = H5Pclose(dxpl1)) < 0)
          assert(ret > 0);
@@ -228,7 +228,7 @@ main(void)
 
     if((ret = encode_plist(gcpl1, little_endian, word_length, "testfiles/plist_files/gcpl_")) < 0)
         assert(ret > 0);
-        
+
     /* release resource */
     if((ret = H5Pclose(gcpl1)) < 0)
          assert(ret > 0);
@@ -245,7 +245,7 @@ main(void)
 
     if((ret = encode_plist(lcpl1, little_endian, word_length, "testfiles/plist_files/lcpl_")) < 0)
         assert(ret > 0);
-        
+
     /* release resource */
     if((ret = H5Pclose(lcpl1)) < 0)
         assert(ret > 0);
@@ -268,7 +268,7 @@ main(void)
 
     if((ret = encode_plist(ocpypl1, little_endian, word_length, "testfiles/plist_files/ocpypl_")) < 0)
         assert(ret > 0);
-        
+
     /* release resource */
     if((ret = H5Pclose(ocpypl1)) < 0)
          assert(ret > 0);
@@ -482,7 +482,7 @@ encode_plist(hid_t plist_id, int little_endian, int word_length, const char *fil
     HDassert(write_size == (ssize_t)temp_size);
 
     HDclose(fd);
-    
+
     HDfree(temp_buf);
 
     return 1;
diff --git a/test/genall5.h b/test/genall5.h
index 1dce195..20141de 100644
--- a/test/genall5.h
+++ b/test/genall5.h
@@ -34,7 +34,7 @@ void os_grp_0(hid_t fid, const char *group_name);
 void vrfy_os_grp_0(hid_t fid, const char *group_name);
 
 void os_grp_n(hid_t fid, const char *group_name, int proc_num, unsigned nlinks);
-void vrfy_os_grp_n(hid_t fid, const char *group_name, int proc_num, 
+void vrfy_os_grp_n(hid_t fid, const char *group_name, int proc_num,
     unsigned nlinks);
 
 void ds_ctg_i(hid_t fid, const char *dset_name, hbool_t write_data);
diff --git a/test/getname.c b/test/getname.c
index c542ec5..a6f2f5a 100644
--- a/test/getname.c
+++ b/test/getname.c
@@ -2375,7 +2375,7 @@ test_main(hid_t file_id, hid_t fapl)
     } H5E_END_TRY;
 
     if(H5Tcommit_anon(file2_id, dtype, H5P_DEFAULT, H5P_DEFAULT)) TEST_ERROR
-    
+
     /* Test H5Iget_name with anonymously created datatype, should pass because committed */
     if((size = H5Iget_name(dtype, NULL, 0)) != 0) TEST_ERROR
 
@@ -2585,7 +2585,7 @@ test_obj_ref(hid_t fapl)
     /* Make sure size parameter is ignored */
     namelen = H5Rget_name(dataset, H5R_OBJECT, &wbuf[0], NULL, 200);
     if(namelen != 9) TEST_ERROR
-    
+
     namelen = H5Rget_name(dataset, H5R_OBJECT, &wbuf[0], (char*)buf, sizeof(buf));
     if(!((HDstrcmp(buf, "/Dataset3") == 0) &&(namelen == 9))) TEST_ERROR
     PASSED();
diff --git a/test/h5test.c b/test/h5test.c
index e7d91b6..9cca100 100644
--- a/test/h5test.c
+++ b/test/h5test.c
@@ -2146,7 +2146,7 @@ const char *H5_get_srcdir_filename(const char *filename)
 /*-------------------------------------------------------------------------
  * Function:    H5_get_srcdir
  *
- * Purpose:     Just return the srcdir path 
+ * Purpose:     Just return the srcdir path
  *
  * Return:      The string
  *
diff --git a/test/mirror_vfd.c b/test/mirror_vfd.c
index 112d67a..4da742f 100644
--- a/test/mirror_vfd.c
+++ b/test/mirror_vfd.c
@@ -107,7 +107,7 @@ static void mybzero(void *dest, size_t size);
 /* ----------------------------------------------------------------------------
  * Function:   mybzero
  *
- * Purpose:    Have bzero simplicity and abstraction in (possible) absence of 
+ * Purpose:    Have bzero simplicity and abstraction in (possible) absence of
  *             it being available.
  *
  * Programmer: Jacob Smith
diff --git a/test/ohdr.c b/test/ohdr.c
index 31a54d2..ad76576 100644
--- a/test/ohdr.c
+++ b/test/ohdr.c
@@ -1053,7 +1053,7 @@ test_minimized_dset_ohdr_size_comparisons(hid_t fapl_id)
 
         dcpl_default = H5Pcreate(H5P_DATASET_CREATE);
         if(dcpl_default < 0) TEST_ERROR
- 
+
         dcpl_minimize = H5Pcreate(H5P_DATASET_CREATE);
         if(dcpl_minimize < 0) TEST_ERROR
         ret = H5Pset_dset_no_attrs_hint(dcpl_minimize, TRUE);
diff --git a/test/page_buffer.c b/test/page_buffer.c
index a6b3561..a508dc9 100644
--- a/test/page_buffer.c
+++ b/test/page_buffer.c
@@ -41,7 +41,7 @@
 
 /* test routines */
 #ifdef H5_HAVE_PARALLEL
-static unsigned verify_page_buffering_disabled(hid_t orig_fapl, 
+static unsigned verify_page_buffering_disabled(hid_t orig_fapl,
     const char *env_h5_drvr);
 #else
 #define NUM_DSETS               5
@@ -72,9 +72,9 @@ const char *FILENAME[] = {
  * Purpose:     The purpose of this function appears to be a smoke check
  *              intended to exercise the page buffer.
  *
- *              Specifically, the function creates a file, and then goes 
- *              through a loop in which it creates four data sets, write 
- *              data to one of them, verifies the data written, and then 
+ *              Specifically, the function creates a file, and then goes
+ *              through a loop in which it creates four data sets, write
+ *              data to one of them, verifies the data written, and then
  *              deletes the three that it didn't write to.
  *
  *              Any data mis-matches or failures reported by the HDF5
@@ -158,7 +158,7 @@ create_file(char *filename, hid_t fcpl, hid_t fapl)
 
         HDmemset(data, 0, (size_t)num_elements * sizeof(int));
         if((dset_id = H5Dopen2(grp_id, dset_name, H5P_DEFAULT)) < 0)
-            FAIL_STACK_ERROR;        
+            FAIL_STACK_ERROR;
         if(H5Dread(dset_id, H5T_NATIVE_INT, H5S_ALL, H5S_ALL, H5P_DEFAULT, data) < 0)
             FAIL_STACK_ERROR;
         if(H5Dclose(dset_id) < 0)
@@ -213,7 +213,7 @@ error:
  * Purpose:     The purpose of this function appears to be a smoke check
  *              intended to exercise the page buffer.
  *
- *              Specifically, the function opens a file (created by 
+ *              Specifically, the function opens a file (created by
  *              create_file()?), and verify the contents of its datasets.
  *
  *              Any data mis-matches or failures reported by the HDF5
@@ -228,7 +228,7 @@ error:
  *-------------------------------------------------------------------------
  */
 static unsigned
-open_file(char *filename, hid_t fapl, hsize_t page_size, 
+open_file(char *filename, hid_t fapl, hsize_t page_size,
     size_t page_buffer_size)
 {
     hid_t       file_id = -1;
@@ -370,7 +370,7 @@ error:
  *
  *              1) verifying that API errors are caught.
  *
- *              2) verifying that the page buffer behaves more or less 
+ *              2) verifying that the page buffer behaves more or less
  *                 as advertized.
  *
  *              Any data mis-matches or unexpected failures or successes
@@ -404,8 +404,8 @@ test_args(hid_t orig_fapl, const char *env_h5_drvr)
         TEST_ERROR;
 
 
-    /* Test setting a page buffer without Paged Aggregation enabled - 
-     * should fail 
+    /* Test setting a page buffer without Paged Aggregation enabled -
+     * should fail
      */
     if(H5Pset_page_buffer_size(fapl, 512, 0, 0) < 0)
         TEST_ERROR;
@@ -418,8 +418,8 @@ test_args(hid_t orig_fapl, const char *env_h5_drvr)
         TEST_ERROR;
 
 
-    /* Test setting a page buffer with a size smaller than a single 
-     * page size - should fail 
+    /* Test setting a page buffer with a size smaller than a single
+     * page size - should fail
      */
     if(H5Pset_file_space_strategy(fcpl, H5F_FSPACE_STRATEGY_PAGE, 0, (hsize_t)1) < 0)
         TEST_ERROR;
@@ -438,8 +438,8 @@ test_args(hid_t orig_fapl, const char *env_h5_drvr)
         TEST_ERROR;
 
 
-    /* Test setting a page buffer with sum of min meta and raw 
-     * data percentage > 100 - should fail 
+    /* Test setting a page buffer with sum of min meta and raw
+     * data percentage > 100 - should fail
      */
     H5E_BEGIN_TRY {
         ret = H5Pset_page_buffer_size(fapl, 512, 50, 51);
@@ -468,8 +468,8 @@ test_args(hid_t orig_fapl, const char *env_h5_drvr)
         TEST_ERROR;
 
 
-    /* Test setting a page buffer with a size slightly larger than a 
-     * single page size 
+    /* Test setting a page buffer with a size slightly larger than a
+     * single page size
      */
     if(H5Pset_file_space_strategy(fcpl, H5F_FSPACE_STRATEGY_PAGE, 0, (hsize_t)1) < 0)
         TEST_ERROR;
@@ -555,14 +555,14 @@ error:
  *
  * Programmer:  unknown
  *              ?? / ?? / ??
- *              
+ *
  * Changes:     Added base_page_cnt field as supporting code.  This allows
  *              the test to adjust to the number of page buffer pages
  *              accessed during file open / create.
  *
- *              The test for the value of base_page_cnt just after file 
+ *              The test for the value of base_page_cnt just after file
  *              open exists detect changes in library behavior.  Assuming
- *              any such change is not indicative of other issues, these 
+ *              any such change is not indicative of other issues, these
  *              tests can be modified to reflect the change.
  *
  *                                                    JRM -- 2/23/17
@@ -615,7 +615,7 @@ test_raw_data_handling(hid_t orig_fapl, const char *env_h5_drvr)
         FAIL_STACK_ERROR;
 
     /* opening the file inserts one or more pages into the page buffer.
-     * Get the number of pages inserted, and verify that it is the 
+     * Get the number of pages inserted, and verify that it is the
      * the expected value.
      */
     base_page_cnt = H5SL_count(f->shared->page_buf->slist_ptr);
@@ -695,8 +695,8 @@ test_raw_data_handling(hid_t orig_fapl, const char *env_h5_drvr)
     if(H5SL_count(f->shared->page_buf->slist_ptr) != page_count + base_page_cnt)
         FAIL_STACK_ERROR;
 
-    /* read elements 1200 - 1201, this should read -1 and bring in an 
-     * entire page of addr 1200 
+    /* read elements 1200 - 1201, this should read -1 and bring in an
+     * entire page of addr 1200
      */
     if(H5F_block_read(f, H5FD_MEM_DRAW, addr+(sizeof(int)*1200), sizeof(int)*1, data) < 0)
         FAIL_STACK_ERROR;
@@ -746,7 +746,7 @@ test_raw_data_handling(hid_t orig_fapl, const char *env_h5_drvr)
     }
 
     /* read elements 0 - 800 using the PB.. this should result in all
-     * what we have written so far and should get the updates from the PB 
+     * what we have written so far and should get the updates from the PB
      */
     if(H5F_block_read(f, H5FD_MEM_DRAW, addr, sizeof(int)*800, data) < 0)
         FAIL_STACK_ERROR;
@@ -761,7 +761,7 @@ test_raw_data_handling(hid_t orig_fapl, const char *env_h5_drvr)
 
     /* update elements 400 - 1400 to value 0, this will go to disk but
      * also evict existing pages from the PB (page 400 & 1200 that are
-     * existing). 
+     * existing).
      */
     for(i=0 ; i<1000 ; i++)
         data[i] = 0;
@@ -832,14 +832,14 @@ error:
  *
  * Programmer:  unknown
  *              ?? / ?? / ??
- *              
+ *
  * Changes:     Added base_page_cnt field as supporting code.  This allows
  *              the test to adjust to the number of page buffer pages
  *              accessed during file open / create.
  *
- *              The test for the value of base_page_cnt just after file 
+ *              The test for the value of base_page_cnt just after file
  *              open exists detect changes in library behavior.  Assuming
- *              any such change is not indicative of other issues, these 
+ *              any such change is not indicative of other issues, these
  *              tests can be modified to reflect the change.
  *
  *                                                    JRM -- 2/23/17
@@ -898,7 +898,7 @@ test_lru_processing(hid_t orig_fapl, const char *env_h5_drvr)
         FAIL_STACK_ERROR;
 
     /* opening the file inserts one or more pages into the page buffer.
-     * Get the number of pages inserted, and verify that it is the 
+     * Get the number of pages inserted, and verify that it is the
      * the expected value.
      */
     base_page_cnt = H5SL_count(f->shared->page_buf->slist_ptr);
@@ -918,7 +918,7 @@ test_lru_processing(hid_t orig_fapl, const char *env_h5_drvr)
 
     /* update the first 100 elements to have values 0-99 - this will be
      * a page buffer update with 1 page resulting in the page
-     * buffer. 
+     * buffer.
      */
     for(i=0 ; i<100 ; i++)
         data[i] = i;
@@ -932,7 +932,7 @@ test_lru_processing(hid_t orig_fapl, const char *env_h5_drvr)
         TEST_ERROR;
 
     /* update elements 300 - 450, with values 300 - 449 - this will
-     * bring two pages into the page buffer and evict 0. 
+     * bring two pages into the page buffer and evict 0.
      */
     for(i=0 ; i<150 ; i++)
         data[i] = i+300;
@@ -1074,7 +1074,7 @@ error:
 /*-------------------------------------------------------------------------
  * Function:    test_min_threshold()
  *
- * Purpose:     Tests verifying observation of minimum and maximum 
+ * Purpose:     Tests verifying observation of minimum and maximum
  *              raw and metadata page counts in the page buffer.
  *
  *              Any data mis-matches or failures reported by the HDF5
@@ -1085,16 +1085,16 @@ error:
  *
  * Programmer:  unknown
  *              ?? / ?? / ??
- *              
+ *
  * Changes:     Added the base_raw_cnt and base_meta_cnt fields and
- *              supporting code.  This allows the test to adjust to the 
- *              number of page buffer pages accessed during file open / 
+ *              supporting code.  This allows the test to adjust to the
+ *              number of page buffer pages accessed during file open /
  *              create.
  *
  *              The tests for the values of base_raw_cnt and base_meta_cnt
- *              just after file open exist detect changes in library 
- *              behavior.  Assuming any such change is not indicative of 
- *              other issues, these tests can be modified to reflect the 
+ *              just after file open exist detect changes in library
+ *              behavior.  Assuming any such change is not indicative of
+ *              other issues, these tests can be modified to reflect the
  *              change.
  *
  *                                                    JRM -- 2/23/17
@@ -1186,7 +1186,7 @@ test_min_threshold(hid_t orig_fapl, const char *env_h5_drvr)
     if(HADDR_UNDEF == (raw_addr = H5MF_alloc(f, H5FD_MEM_DRAW, sizeof(int)*(size_t)num_elements)))
         FAIL_STACK_ERROR;
 
-    /* write all raw data, this would end up in page buffer since there 
+    /* write all raw data, this would end up in page buffer since there
      * is no metadata yet
      *
      * Not necessarily -- opening the file may may load a metadata page.
@@ -1244,7 +1244,7 @@ test_min_threshold(hid_t orig_fapl, const char *env_h5_drvr)
 
     /* write and read more raw data and make sure that they don't end up in
      * page buffer since the minimum metadata is actually the entire
-     * page buffer 
+     * page buffer
      */
     if(H5F_block_write(f, H5FD_MEM_DRAW, raw_addr+(sizeof(int)*200), sizeof(int)*100, data) < 0)
         FAIL_STACK_ERROR;
@@ -1320,7 +1320,7 @@ test_min_threshold(hid_t orig_fapl, const char *env_h5_drvr)
     if(HADDR_UNDEF == (raw_addr = H5MF_alloc(f, H5FD_MEM_DRAW, sizeof(int)*(size_t)num_elements)))
         TEST_ERROR;
 
-    /* write all meta data, this would end up in page buffer since there 
+    /* write all meta data, this would end up in page buffer since there
      * is no raw data yet
      */
     for(i=0 ; i<100 ; i++)
@@ -1375,7 +1375,7 @@ test_min_threshold(hid_t orig_fapl, const char *env_h5_drvr)
 
     /* write and read more meta data and make sure that they don't end up in
      * page buffer since the minimum metadata is actually the entire
-     * page buffer 
+     * page buffer
      */
     if(H5F_block_write(f, H5FD_MEM_SUPER, meta_addr+(sizeof(int)*100), sizeof(int)*50, data) < 0)
         FAIL_STACK_ERROR;
@@ -1407,8 +1407,8 @@ test_min_threshold(hid_t orig_fapl, const char *env_h5_drvr)
 
     HDprintf("\tMinimum metadata threshold = 40%%, Minimum rawdata threshold = 40%%\n");
     page_count = 0;
-    /* keep 5 pages at max in the page buffer 2 meta pages, 2 raw pages  
-     * minimum 
+    /* keep 5 pages at max in the page buffer 2 meta pages, 2 raw pages
+     * minimum
      */
     if(H5Pset_page_buffer_size(fapl, sizeof(int)*1000, 40, 40) < 0)
         TEST_ERROR;
@@ -1423,8 +1423,8 @@ test_min_threshold(hid_t orig_fapl, const char *env_h5_drvr)
 
     /* opening the file inserts one or more pages into the page buffer.
      *
-     * However, with the current 1 metadata page inserted into the 
-     * the page buffer, it is not necessary to track the base raw and 
+     * However, with the current 1 metadata page inserted into the
+     * the page buffer, it is not necessary to track the base raw and
      * metadata entry counts.
      */
 
@@ -1503,8 +1503,8 @@ test_min_threshold(hid_t orig_fapl, const char *env_h5_drvr)
     if(f->shared->page_buf->raw_count != 2)
         TEST_ERROR;
 
-    /* adding more meta entires should replace meta entries since raw data 
-     * is at its minimum 
+    /* adding more meta entires should replace meta entries since raw data
+     * is at its minimum
      */
     if(H5F_block_write(f, H5FD_MEM_SUPER, meta_addr+(sizeof(int)*600), sizeof(int)*100, data) < 0)
         FAIL_STACK_ERROR;
@@ -1522,8 +1522,8 @@ test_min_threshold(hid_t orig_fapl, const char *env_h5_drvr)
     if(H5F_block_read(f, H5FD_MEM_DRAW, raw_addr+(sizeof(int)*750), sizeof(int)*100, data) < 0)
         FAIL_STACK_ERROR;
 
-    /* adding 2 raw entries (even with 1 call) should only evict 1 meta 
-     * entry and another raw entry 
+    /* adding 2 raw entries (even with 1 call) should only evict 1 meta
+     * entry and another raw entry
      */
     if(H5F_block_read(f, H5FD_MEM_DRAW, raw_addr+(sizeof(int)*350), sizeof(int)*100, data) < 0)
         FAIL_STACK_ERROR;
@@ -1647,8 +1647,8 @@ test_min_threshold(hid_t orig_fapl, const char *env_h5_drvr)
     if(f->shared->page_buf->raw_count != 4)
         TEST_ERROR;
 
-    /* write one more raw entry which should replace another raw entry 
-     * keeping min threshold of meta entries 
+    /* write one more raw entry which should replace another raw entry
+     * keeping min threshold of meta entries
      */
     if(H5F_block_write(f, H5FD_MEM_DRAW, raw_addr+(sizeof(int)*300), sizeof(int)*100, data) < 0)
         FAIL_STACK_ERROR;
@@ -1662,8 +1662,8 @@ test_min_threshold(hid_t orig_fapl, const char *env_h5_drvr)
     if(f->shared->page_buf->raw_count != 4)
         TEST_ERROR;
 
-    /* write a metadata entry that should replace the metadata entry 
-     * at the bottom of the LRU 
+    /* write a metadata entry that should replace the metadata entry
+     * at the bottom of the LRU
      */
     if(H5F_block_write(f, H5FD_MEM_SUPER, meta_addr+(sizeof(int)*500), sizeof(int)*100, data) < 0)
         FAIL_STACK_ERROR;
@@ -1721,16 +1721,16 @@ error:
  *
  * Programmer:  unknown
  *              ?? / ?? / ??
- *              
+ *
  * Changes:     Added the base_raw_cnt and base_meta_cnt fields and
- *              supporting code.  This allows the test to adjust to the 
- *              number of page buffer pages accessed during file open / 
+ *              supporting code.  This allows the test to adjust to the
+ *              number of page buffer pages accessed during file open /
  *              create.
  *
  *              The tests for the values of base_raw_cnt and base_meta_cnt
- *              just after file open exist detect changes in library 
- *              behavior.  Assuming any such change is not indicative of 
- *              other issues, these tests can be modified to reflect the 
+ *              just after file open exist detect changes in library
+ *              behavior.  Assuming any such change is not indicative of
+ *              other issues, these tests can be modified to reflect the
  *              change.
  *
  *                                                    JRM -- 2/23/17
@@ -1787,7 +1787,7 @@ test_stats_collection(hid_t orig_fapl, const char *env_h5_drvr)
         FAIL_STACK_ERROR;
 
     /* opening the file inserts one or more pages into the page buffer.
-     * Get the raw and meta counts now, so we can adjust the expected 
+     * Get the raw and meta counts now, so we can adjust the expected
      * statistics accordingly.
      */
     HDassert(f);
@@ -2014,7 +2014,7 @@ error:
 /*-------------------------------------------------------------------------
  * Function:    verify_page_buffering_disabled()
  *
- * Purpose:     This function should only be called in parallel 
+ * Purpose:     This function should only be called in parallel
  *              builds.
  *
  *              At present, page buffering should be disabled in parallel
@@ -2025,7 +2025,7 @@ error:
  *
  * Programmer:  John Mainzer
  *              03/21/17
- *              
+ *
  * Changes:     None.
  *
  *-------------------------------------------------------------------------
@@ -2072,7 +2072,7 @@ verify_page_buffering_disabled(hid_t orig_fapl, const char *env_h5_drvr)
     if(file_id >= 0)
         TEST_ERROR;
 
-    /* now, create a file, close it, and then try to open it with page 
+    /* now, create a file, close it, and then try to open it with page
      * buffering enabled.
      */
     if((fcpl = H5Pcreate(H5P_FILE_CREATE)) < 0)
@@ -2092,7 +2092,7 @@ verify_page_buffering_disabled(hid_t orig_fapl, const char *env_h5_drvr)
     if(H5Fclose(file_id) < 0)
         FAIL_STACK_ERROR;
 
-    /* try to open the file using the fapl prepared above which enables 
+    /* try to open the file using the fapl prepared above which enables
      * page buffering.  Should fail.
      */
     H5E_BEGIN_TRY {
@@ -2158,7 +2158,7 @@ main(void)
      * Page buffering depends on paged aggregation which is
      * currently disabled for multi/split drivers.
      */
-    if((0 == HDstrcmp(env_h5_drvr, "multi")) || 
+    if((0 == HDstrcmp(env_h5_drvr, "multi")) ||
        (0 == HDstrcmp(env_h5_drvr, "split"))) {
 
         SKIPPED()
@@ -2175,7 +2175,7 @@ main(void)
     if(H5CX_push() < 0) FAIL_STACK_ERROR
     api_ctx_pushed = TRUE;
 
-#ifdef H5_HAVE_PARALLEL 
+#ifdef H5_HAVE_PARALLEL
 
     HDputs("Page Buffering is disabled for parallel.");
     nerrors += verify_page_buffering_disabled(fapl, env_h5_drvr);
diff --git a/test/swmr_addrem_writer.c b/test/swmr_addrem_writer.c
index df984b1..71e4929 100644
--- a/test/swmr_addrem_writer.c
+++ b/test/swmr_addrem_writer.c
@@ -337,7 +337,7 @@ int main(int argc, const char *argv[])
                         verbose = 0;
                         u++;
                         break;
-                    
+
                     /* Random # seed */
                     case 'r':
                         use_seed = 1;
diff --git a/test/swmr_check_compat_vfd.c b/test/swmr_check_compat_vfd.c
index e249e09..9b4fbb5 100644
--- a/test/swmr_check_compat_vfd.c
+++ b/test/swmr_check_compat_vfd.c
@@ -13,7 +13,7 @@
 
 /* Purpose:     This is a small program that checks if the HDF5_DRIVER
  *              environment variable is set to a value that supports SWMR.
- *              
+ *
  *              It is intended for use in shell scripts.
  */
 
diff --git a/test/swmr_common.c b/test/swmr_common.c
index 925dc33..7ae1fad 100644
--- a/test/swmr_common.c
+++ b/test/swmr_common.c
@@ -27,7 +27,7 @@
 #include "h5test.h"
 #include "swmr_common.h"
 #include "vds_swmr.h"
- 
+
 /*******************/
 /* Local Variables */
 /*******************/
diff --git a/test/swmr_common.h b/test/swmr_common.h
index 99d1cb2..a0bc581 100644
--- a/test/swmr_common.h
+++ b/test/swmr_common.h
@@ -26,7 +26,7 @@
 
 #define NLEVELS         5   /* # of datasets in the SWMR test file */
 
-#define NMAPPING        9   
+#define NMAPPING        9
 
 #define FILENAME        "swmr_data.h5"  /* SWMR test file name */
 #define DTYPE_SIZE      150             /* Data size in opaque type */
diff --git a/test/swmr_generator.c b/test/swmr_generator.c
index 54a9900..f6a4fe2 100644
--- a/test/swmr_generator.c
+++ b/test/swmr_generator.c
@@ -358,7 +358,7 @@ int main(int argc, const char *argv[])
         HDfprintf(stderr, "\tcompression level = %d\n", comp_level);
         HDfprintf(stderr, "\tindex type = %s\n", index_type);
     } /* end if */
-    
+
     /* Set the random seed */
     if(!use_seed) {
         struct timeval t;
diff --git a/test/swmr_reader.c b/test/swmr_reader.c
index cb354a7..ee263e3 100644
--- a/test/swmr_reader.c
+++ b/test/swmr_reader.c
@@ -329,7 +329,7 @@ read_records(const char *filename, hbool_t verbose, FILE *verbose_file,
         /* Emit informational message */
         if(verbose)
             HDfprintf(verbose_file, "Closing file\n");
-            
+
         /* Close the file */
         if(H5Fclose(fid) < 0)
             return -1;
diff --git a/test/swmr_remove_reader.c b/test/swmr_remove_reader.c
index 9ca6045..b02d16f 100644
--- a/test/swmr_remove_reader.c
+++ b/test/swmr_remove_reader.c
@@ -371,7 +371,7 @@ usage(void)
     HDprintf("and will generate a random seed (no -r given).\n");
     HDprintf("\n");
     HDexit(EXIT_FAILURE);
-} 
+}
 
 int main(int argc, const char *argv[])
 {
diff --git a/test/swmr_remove_writer.c b/test/swmr_remove_writer.c
index e6d23de..2bebab9 100644
--- a/test/swmr_remove_writer.c
+++ b/test/swmr_remove_writer.c
@@ -272,7 +272,7 @@ int main(int argc, const char *argv[])
                         verbose = 0;
                         u++;
                         break;
-                    
+
                     /* Random # seed */
                     case 'r':
                         use_seed = 1;
diff --git a/test/swmr_sparse_reader.c b/test/swmr_sparse_reader.c
index 6adc6c5..6d5d257 100644
--- a/test/swmr_sparse_reader.c
+++ b/test/swmr_sparse_reader.c
@@ -162,7 +162,7 @@ check_dataset(hid_t fid, unsigned verbose, const symbol_info_t *symbol, symbol_t
  *              The amount of time to sleep (s).
  *
  *              unsigned reopen_count
- *              
+ *
  *
  * Return:      Success:    0
  *              Failure:    -1
@@ -185,7 +185,7 @@ read_records(const char *filename, unsigned verbose, unsigned long nrecords,
 
     HDassert(filename);
     HDassert(poll_time != 0);
-    
+
     /* Create file access property list */
     if((fapl = h5_fileaccess()) < 0)
         return -1;
diff --git a/test/swmr_start_write.c b/test/swmr_start_write.c
index c4222ad..fc7e7a5 100644
--- a/test/swmr_start_write.c
+++ b/test/swmr_start_write.c
@@ -53,11 +53,11 @@ static void usage(void);
  * Purpose:     Creates the HDF5 file (without SWMR access) which
  *              which will be used for testing H5Fstart_swmr_write().
  *
- * Parameters:  
+ * Parameters:
  *              filename: The SWMR test file's name.
  *              verbose: whether verbose console output is desired.
  *              verbose_file: file pointer for verbose output
- *              random_seed: The random seed to store in the file.  
+ *              random_seed: The random seed to store in the file.
  *              The sparse tests use this value.
  *
  * Return:      Success:    the file ID
@@ -134,10 +134,10 @@ create_file(const char *filename, hbool_t verbose, FILE *verbose_file,
 /*-------------------------------------------------------------------------
  * Function:    create_datasets
  *
- * Purpose:     Create datasets (and keep them opened) which will be used for testing 
+ * Purpose:     Create datasets (and keep them opened) which will be used for testing
  *              H5Fstart_swmr_write().
  *
- * Parameters:  
+ * Parameters:
  *              fid: file ID for the SWMR test file
  *              comp_level: the compresssion level
  *              index_type: The chunk index type (b1 | b2 | ea | fa)
@@ -212,7 +212,7 @@ create_datasets(hid_t fid, int comp_level, hbool_t verbose, FILE *verbose_file,
  * Purpose:     Writes a specified number of records to random datasets in
  *              the SWMR test file.
  *
- * Parameters:  
+ * Parameters:
  *              fid: The file ID of the SWMR HDF5 file
  *              verbose: Whether or not to emit verbose console messages
  *              verbose_file: file pointer for verbose output
@@ -419,7 +419,7 @@ int main(int argc, const char *argv[])
                         verbose = FALSE;
                         u++;
                         break;
-                    
+
                     /* Random # seed */
                     case 'r':
                         use_seed = TRUE;
diff --git a/test/swmr_writer.c b/test/swmr_writer.c
index 4c3e64a..d4387aa 100644
--- a/test/swmr_writer.c
+++ b/test/swmr_writer.c
@@ -328,7 +328,7 @@ int main(int argc, const char *argv[])
                         verbose = FALSE;
                         u++;
                         break;
-                    
+
                     /* Random # seed */
                     case 'r':
                         use_seed = TRUE;
diff --git a/test/test_filter_plugin.sh.in b/test/test_filter_plugin.sh.in
index 0a45c0f..e8c53e4 100644
--- a/test/test_filter_plugin.sh.in
+++ b/test/test_filter_plugin.sh.in
@@ -1,10 +1,10 @@
 #! /bin/sh
 #
-# Copyright by The HDF Group.                                              
-# All rights reserved.                                                     
-#                                                                          
-# This file is part of HDF5. The full HDF5 copyright notice, including     
-# terms governing use, modification, and redistribution, is contained in   
+# Copyright by The HDF Group.
+# All rights reserved.
+#
+# This file is part of HDF5. The full HDF5 copyright notice, including
+# terms governing use, modification, and redistribution, is contained in
 # the COPYING file, which can be found at the root of the source code
 # distribution tree, or in https://support.hdfgroup.org/ftp/HDF5/releases.
 # If you do not have access to either file, you may request a copy from
diff --git a/test/test_vol_plugin.sh.in b/test/test_vol_plugin.sh.in
index 38220ef..32d1c12 100644
--- a/test/test_vol_plugin.sh.in
+++ b/test/test_vol_plugin.sh.in
@@ -1,10 +1,10 @@
 #! /bin/sh
 #
-# Copyright by The HDF Group.                                              
-# All rights reserved.                                                     
-#                                                                          
-# This file is part of HDF5. The full HDF5 copyright notice, including     
-# terms governing use, modification, and redistribution, is contained in   
+# Copyright by The HDF Group.
+# All rights reserved.
+#
+# This file is part of HDF5. The full HDF5 copyright notice, including
+# terms governing use, modification, and redistribution, is contained in
 # the COPYING file, which can be found at the root of the source code
 # distribution tree, or in https://support.hdfgroup.org/ftp/HDF5/releases.
 # If you do not have access to either file, you may request a copy from
diff --git a/test/testabort_fail.sh.in b/test/testabort_fail.sh.in
index 925d8a4..c86bf8a 100644
--- a/test/testabort_fail.sh.in
+++ b/test/testabort_fail.sh.in
@@ -14,7 +14,7 @@
 # Test to verify that the assertion/abort failure is fixed when the application
 # does not close the file. (See HDFFV-10160)
 #
-# Test to verify that the infinite loop closing library/abort failure is fixed 
+# Test to verify that the infinite loop closing library/abort failure is fixed
 # when the application creates and removes dense attributes (See HDFFV-10659)
 
 srcdir=@srcdir@
@@ -33,7 +33,7 @@ TEST_NAME=filenotclosed     # The test name
 TEST_BIN=`pwd`/$TEST_NAME   # The path of the test binary
 #
 # Run the test
-$RUNSERIAL $TEST_BIN >/dev/null 2>&1 
+$RUNSERIAL $TEST_BIN >/dev/null 2>&1
 exitcode=$?
 if [ $exitcode -eq 0 ]; then
     echo "Test PASSED"
@@ -47,7 +47,7 @@ echo "Testing infinite loop closing library/abort failure"
 TEST_NAME=del_many_dense_attrs  # The test name
 TEST_BIN=`pwd`/$TEST_NAME 	    # The path of the test binary
 # Run the test
-$RUNSERIAL $TEST_BIN >/dev/null 2>&1 
+$RUNSERIAL $TEST_BIN >/dev/null 2>&1
 exitcode=$?
 if [ $exitcode -eq 0 ]; then
     echo "Test PASSED"
diff --git a/test/testcheck_version.sh.in b/test/testcheck_version.sh.in
index a5641f5..836170d 100644
--- a/test/testcheck_version.sh.in
+++ b/test/testcheck_version.sh.in
@@ -71,7 +71,7 @@ WarnMesg(){
     test -n "$H5_HAVE_EMBEDDED_LIBINFO" && cat $h5libsettings
     echo "Bye..."
 }
-  
+
 
 # Print warning message2 of version mismatch.
 WarnMesg2(){
@@ -88,13 +88,13 @@ WarnMesg2(){
     echo "Headers are $xxh5versmajor.$xxh5versminor.$xxh5versrelease, library is $h5versmajor.$h5versminor.$h5versrelease"
     test -n "$H5_HAVE_EMBEDDED_LIBINFO" && cat $h5libsettings
 }
-  
+
 
 # Run a test and print PASS or *FAIL*.  If a test fails then increment
 # the `nerrors' global variable and (if $verbose is set) display the
 # difference between the actual output and the expected output. The
 # expected output generated according to the parameter values and compared
-# against actual output. 
+# against actual output.
 # The expected and actual output files are removed unless $HDF5_NOCLEANUP
 # has a non-zero value.
 # $1: the set value of $HDF5_DISABLE_VERSION_CHECK. (unset means not to set
@@ -175,7 +175,7 @@ TESTING() {
     ) >$actual 2>$actual_err
     ret_code=$?
     cat $actual_err >> $actual
-    
+
     if [ $h5haveexitcode = 'yes' -a \( $expect_code -ne $ret_code \) ]; then
 	echo "*FAILED*"
 	echo "    Expected exit code ($expect_code) differs from actual code ($ret_code)"
@@ -189,7 +189,7 @@ TESTING() {
 	test yes = "$verbose" && $DIFF $expect $actual |sed 's/^/    /'
     fi
 
-    # Clean up output file. 
+    # Clean up output file.
     # Also clean the core file generated by H5check_version's abort.
     if test -z "$HDF5_NOCLEANUP"; then
 	$RM $expect $actual $actual_err
@@ -211,14 +211,14 @@ nerrors=0
 verbose=yes	# default on
 debugmode=	# default off
 H5_HAVE_EMBEDDED_LIBINFO=`grep '#define H5_HAVE_EMBEDDED_LIBINFO ' ../src/H5pubconf.h`
-h5libsettings=../src/libhdf5.settings 
+h5libsettings=../src/libhdf5.settings
 
 PURPOSE
 
 # Figure out library version numbers from the header file.
-h5versmajor=`grep '#define H5_VERS_MAJOR' $srcdir/../src/H5public.h | cut -f2` 
-h5versminor=`grep '#define H5_VERS_MINOR' $srcdir/../src/H5public.h | cut -f2` 
-h5versrelease=`grep '#define H5_VERS_RELEASE' $srcdir/../src/H5public.h | cut -f2` 
+h5versmajor=`grep '#define H5_VERS_MAJOR' $srcdir/../src/H5public.h | cut -f2`
+h5versminor=`grep '#define H5_VERS_MINOR' $srcdir/../src/H5public.h | cut -f2`
+h5versrelease=`grep '#define H5_VERS_RELEASE' $srcdir/../src/H5public.h | cut -f2`
 DEBUGPRINT $h5versmajor.$h5versminor.$h5versrelease
 case "$h5versmajor$h5versminor$h5versrelease" in
     [0-9]*)     # good. noop.
diff --git a/test/testerror.sh.in b/test/testerror.sh.in
index ac2a109..b5ec853 100644
--- a/test/testerror.sh.in
+++ b/test/testerror.sh.in
@@ -11,7 +11,7 @@
 # If you do not have access to either file, you may request a copy from
 # help@hdfgroup.org.
 #
-# Tests for test_error and err_compat 
+# Tests for test_error and err_compat
 
 srcdir=@srcdir@
 
@@ -62,7 +62,7 @@ TEST() {
    TESTING $TEST_ERR
    (
       # Skip the plugin for testing missing filter.
-      $ENVCMD $RUNSERIAL $TEST_ERR_BIN 
+      $ENVCMD $RUNSERIAL $TEST_ERR_BIN
    ) >$actual 2>$actual_err
    # Extract file name, line number, version and thread IDs because they may be different
    sed -e 's/thread [0-9]*/thread (IDs)/' -e 's/: .*\.c /: (file name) /' \
@@ -73,7 +73,7 @@ TEST() {
         -e 's/H5Eset_auto[1-2]*/H5Eset_auto(1 or 2)/' \
 	$actual_err > $actual_ext
    cat $actual_ext >> $actual
-    
+
    if $CMP $expect1 $actual; then
       echo " PASSED"
    elif $CMP $expect2 $actual; then
@@ -96,7 +96,7 @@ SKIP() {
     TESTING $@
     echo  " -SKIP-"
 }
-  
+
 ##############################################################################
 ##############################################################################
 ###			  T H E   T E S T S                                ###
diff --git a/test/testlibinfo.sh.in b/test/testlibinfo.sh.in
index 1dd744b..b2e8a12 100644
--- a/test/testlibinfo.sh.in
+++ b/test/testlibinfo.sh.in
@@ -47,7 +47,7 @@ SKIP() {
     LINEMSG $*
     echo  " -SKIP-"
 }
-  
+
 # Function definitions
 CHECK_LIBINFO(){
     LINEMSG $1
@@ -80,9 +80,9 @@ if [ -n $Shared_Lib ]; then
    shlib=$(grep dlname ../src/libhdf5.la | sed -e "s/dlname='//" -e "s/'//")
 else
    h5libdir=../src
-fi 
+fi
 
-h5libsettings=../src/libhdf5.settings 
+h5libsettings=../src/libhdf5.settings
 
 # Part 1:
 # Verify the HDF5 library does contains an exact copy of the content of the
diff --git a/test/th5s.c b/test/th5s.c
index c60b1ff..bb84353 100644
--- a/test/th5s.c
+++ b/test/th5s.c
@@ -1210,7 +1210,7 @@ test_h5s_encode(H5F_libver_t low, H5F_libver_t high)
      * Test encoding and decoding of simple dataspace and hyperslab selection.
      *-------------------------------------------------------------------------
      */
-    
+
     /* Create the file access property list */
     fapl = H5Pcreate(H5P_FILE_ACCESS);
     CHECK(fapl, FAIL, "H5Pcreate");
@@ -1569,7 +1569,7 @@ test_h5s_encode1(void)
 
 /****************************************************************
 **
-**  test_h5s_check_encoding(): 
+**  test_h5s_check_encoding():
 **      This is the helper routine to verify that H5Sencode2()
 **      works as specified in the RFC for the library format setting
 **      in the file access property list.
@@ -1582,7 +1582,7 @@ test_h5s_encode1(void)
 **
 ****************************************************************/
 static herr_t
-test_h5s_check_encoding(hid_t in_fapl, hid_t in_sid, 
+test_h5s_check_encoding(hid_t in_fapl, hid_t in_sid,
     uint32_t expected_version, uint8_t expected_enc_size, hbool_t expected_to_fail)
 {
     char *buf = NULL;       /* Pointer to the encoded buffer */
@@ -1633,7 +1633,7 @@ test_h5s_check_encoding(hid_t in_fapl, hid_t in_sid,
         VERIFY(in_low_bounds[0], d_low_bounds[0], "Compare selection low bounds");
         VERIFY(in_high_bounds[0], d_high_bounds[0], "Compare selection high bounds");
 
-        /* 
+        /*
          * See "RFC: H5Sencode/H5Sdeocde Format Change" for the verification of:
          *   H5S_SEL_POINTS:
          *      --the expected version for point selection info
@@ -1644,7 +1644,7 @@ test_h5s_check_encoding(hid_t in_fapl, hid_t in_sid,
          */
 
         if(H5Sget_select_type(in_sid) == H5S_SEL_POINTS) {
-        
+
             /* Verify the version */
             VERIFY((uint32_t)buf[35], expected_version, "Version for point selection");
 
@@ -1666,7 +1666,7 @@ test_h5s_check_encoding(hid_t in_fapl, hid_t in_sid,
 
         ret = H5Sclose(d_sid);
         CHECK(ret, FAIL, "H5Sclose");
-        if(buf) 
+        if(buf)
             HDfree(buf);
 
     }
@@ -1723,15 +1723,15 @@ test_h5s_encode_regular_hyper(H5F_libver_t low, H5F_libver_t high)
             start = 0;
             count = unlim? H5S_UNLIMITED : 2;
 
-            if((high <= H5F_LIBVER_V18) && 
+            if((high <= H5F_LIBVER_V18) &&
                (unlim || config == CONFIG_32))
                 expected_to_fail = TRUE;
 
-            if(low >= H5F_LIBVER_V112) 
+            if(low >= H5F_LIBVER_V112)
                 expected_version = 3;
             else if(config == CONFIG_16 && !unlim)
                 expected_version = 1;
-            else 
+            else
                 expected_version = 2;
 
             /* test 1 */
@@ -1745,7 +1745,7 @@ test_h5s_encode_regular_hyper(H5F_libver_t low, H5F_libver_t high)
                     stride = POWER32 - 1;
                     block = 4;
                     expected_enc_size = (uint8_t)(expected_version == 3 ? 4 : 8);
-                    
+
                     break;
                 default:
                     HDassert(0);
@@ -1873,7 +1873,7 @@ test_h5s_encode_regular_hyper(H5F_libver_t low, H5F_libver_t high)
 
 /****************************************************************
 **
-**  test_h5s_encode_irregular_hyper(): 
+**  test_h5s_encode_irregular_hyper():
 **      This test verifies that H5Sencode2() works as specified in
 **      the RFC for irregular hyperslabs.
 **      See "RFC: H5Sencode/H5Sdeocde Format Change".
@@ -1961,7 +1961,7 @@ test_h5s_encode_irregular_hyper(H5F_libver_t low, H5F_libver_t high)
                 break;
 
             case CONFIG_16:
-                stride = POWER16;    
+                stride = POWER16;
                 expected_enc_size = 4;
                 break;
 
@@ -2092,11 +2092,11 @@ test_h5s_encode_points(H5F_libver_t low, H5F_libver_t high)
 
 /****************************************************************
 **
-**  test_h5s_encode_length(): 
+**  test_h5s_encode_length():
 **      Test to verify HDFFV-10271 is fixed.
 **      Verify that version 2 hyperslab encoding length is correct.
 **
-**  See "RFC: H5Sencode/H5Sdecode Format Change" for the 
+**  See "RFC: H5Sencode/H5Sdecode Format Change" for the
 **  description of the encoding format.
 **
 ****************************************************************/
diff --git a/test/thread_id.c b/test/thread_id.c
index 818ab4a..24aef80 100644
--- a/test/thread_id.c
+++ b/test/thread_id.c
@@ -11,7 +11,7 @@
  * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * */
 
 /* Check that a thread ID returned by H5TS_thread_id() possesses the
- * following properties: 
+ * following properties:
  *
  * 1 ID >= 1.
  * 2 The ID is constant over the thread's lifetime.
diff --git a/test/trefer.c b/test/trefer.c
index d399fef..15f9d64 100644
--- a/test/trefer.c
+++ b/test/trefer.c
@@ -542,7 +542,7 @@ test_reference_obj(void)
 **      Tests references to various kinds of objects
 **
 **  Note: The libver_low/libver_high parameters are added to create the file
-**        with the low and high bounds setting in fapl.  
+**        with the low and high bounds setting in fapl.
 **        Please see the RFC for "H5Sencode/H5Sdecode Format Change".
 **
 ****************************************************************/
@@ -634,7 +634,7 @@ test_reference_region(H5F_libver_t libver_low, H5F_libver_t libver_high)
     H5E_BEGIN_TRY {
         dset1 = H5Dcreate2(fid1, "Dataset1", H5T_STD_REF, sid1, H5P_DEFAULT, H5P_DEFAULT, H5P_DEFAULT);
     } H5E_END_TRY;
-    
+
     if(dset1 < 0) {
         VERIFY(libver_high <= H5F_LIBVER_V110, TRUE, "H5Dcreate2");
 
@@ -840,7 +840,7 @@ test_reference_region(H5F_libver_t libver_low, H5F_libver_t libver_high)
         VERIFY(ret, 1, "H5Sget_select_hyper_nblocks");
 
         /* allocate space for the hyperslab blocks */
-        coords = (hsize_t *)HDmalloc((size_t)ret * SPACE2_RANK * sizeof(hsize_t) * 2); 
+        coords = (hsize_t *)HDmalloc((size_t)ret * SPACE2_RANK * sizeof(hsize_t) * 2);
 
         ret = H5Sget_select_hyper_blocklist(sid2, (hsize_t)0, (hsize_t)ret, coords);
         CHECK(ret, FAIL, "H5Sget_select_hyper_blocklist");
@@ -871,7 +871,7 @@ test_reference_region(H5F_libver_t libver_low, H5F_libver_t libver_high)
         VERIFY(ret, SPACE2_DIM2, "H5Sget_select_elem_npoints");
 
         /* allocate space for the element points */
-        coords = (hsize_t *)HDmalloc((size_t)ret * SPACE2_RANK * sizeof(hsize_t)); 
+        coords = (hsize_t *)HDmalloc((size_t)ret * SPACE2_RANK * sizeof(hsize_t));
 
         ret = H5Sget_select_elem_pointlist(sid2, (hsize_t)0, (hsize_t)ret, coords);
         CHECK(ret, FAIL, "H5Sget_select_elem_pointlist");
@@ -1196,7 +1196,7 @@ test_reference_region_1D(H5F_libver_t libver_low, H5F_libver_t libver_high)
         VERIFY(ret, 15, "H5Sget_select_hyper_nblocks");
 
         /* allocate space for the hyperslab blocks */
-        coords = (hsize_t *)HDmalloc((size_t)ret * SPACE3_RANK * sizeof(hsize_t) * 2); 
+        coords = (hsize_t *)HDmalloc((size_t)ret * SPACE3_RANK * sizeof(hsize_t) * 2);
 
         ret = H5Sget_select_hyper_blocklist(sid3, (hsize_t)0, (hsize_t)ret, coords);
         CHECK(ret, FAIL, "H5Sget_select_hyper_blocklist");
@@ -1251,7 +1251,7 @@ test_reference_region_1D(H5F_libver_t libver_low, H5F_libver_t libver_high)
         VERIFY(ret, 10, "H5Sget_select_elem_npoints");
 
         /* allocate space for the element points */
-        coords = (hsize_t *)HDmalloc((size_t)ret * SPACE3_RANK * sizeof(hsize_t)); 
+        coords = (hsize_t *)HDmalloc((size_t)ret * SPACE3_RANK * sizeof(hsize_t));
 
         ret = H5Sget_select_elem_pointlist(sid3, (hsize_t)0, (hsize_t)ret, coords);
         CHECK(ret, FAIL, "H5Sget_select_elem_pointlist");
diff --git a/test/trefer_deprec.c b/test/trefer_deprec.c
index a830314..db91b8e 100644
--- a/test/trefer_deprec.c
+++ b/test/trefer_deprec.c
@@ -491,7 +491,7 @@ test_reference_obj(void)
 **      Tests references to various kinds of objects
 **
 **  Note: The libver_low/libver_high parameters are added to create the file
-**        with the low and high bounds setting in fapl.  
+**        with the low and high bounds setting in fapl.
 **        Please see the RFC for "H5Sencode/H5Sdecode Format Change".
 **
 ****************************************************************/
diff --git a/test/trefer_shutdown.c b/test/trefer_shutdown.c
index 89a44b3..b1c43e0 100644
--- a/test/trefer_shutdown.c
+++ b/test/trefer_shutdown.c
@@ -50,7 +50,7 @@ main(int argc, char **argv)
     /*
      * "Forget" to call H5Rdestroy on reference objects. If H5Rdestroy
      * is called at least once on either reference object, or both
-     * objects, the infinite loop goes away. If H5Rdestroy is never 
+     * objects, the infinite loop goes away. If H5Rdestroy is never
      * called, the infinite loop will appear.
      */
 #if 0
diff --git a/test/trefstr.c b/test/trefstr.c
index 83e2951..c33b5eb 100644
--- a/test/trefstr.c
+++ b/test/trefstr.c
@@ -299,7 +299,7 @@ test_refstr_own(void)
 
     /* Initialize buffer */
     s = (char *)H5FL_BLK_MALLOC(str_buf,HDstrlen("foo") + 1);
-    CHECK_PTR(s, "H5FL_BLK_MALLOC");    
+    CHECK_PTR(s, "H5FL_BLK_MALLOC");
     HDstrcpy(s, "foo");
 
     /* Transfer ownership of dynamically allocated string to ref-counted string */
diff --git a/test/tselect.c b/test/tselect.c
index 390f61f..492a917 100644
--- a/test/tselect.c
+++ b/test/tselect.c
@@ -15325,7 +15325,7 @@ test_select_intersect_block(void)
 
 /****************************************************************
 **
-**  test_hyper_io_1d(): 
+**  test_hyper_io_1d():
 **  Test to verify all the selected 10th element in the 1-d file
 **  dataspace is read correctly into the 1-d contiguous memory space.
 **  This is modeled after the test scenario described in HDFFV-10585
diff --git a/test/ttsafe.c b/test/ttsafe.c
index 89c87a3..e6edd9a 100644
--- a/test/ttsafe.c
+++ b/test/ttsafe.c
@@ -106,7 +106,7 @@ int main(int argc, char *argv[])
 #ifdef H5_HAVE_THREADSAFE
     AddTest("dcreate", tts_dcreate, cleanup_dcreate, "multi-dataset creation", NULL);
     AddTest("error", tts_error, cleanup_error, "per-thread error stacks", NULL);
-#ifdef H5_HAVE_PTHREAD_H    
+#ifdef H5_HAVE_PTHREAD_H
     /* Thread cancellability only supported with pthreads ... */
     AddTest("cancel", tts_cancel, cleanup_cancel, "thread cancellation safety test", NULL);
 #endif /* H5_HAVE_PTHREAD_H */
diff --git a/test/twriteorder.c b/test/twriteorder.c
index b104b72..04f3bc5 100644
--- a/test/twriteorder.c
+++ b/test/twriteorder.c
@@ -187,7 +187,7 @@ parse_option(int argc, char * const argv[])
     /* verify partition size must be >= blocksize */
     if (part_size_g < blocksize_g ){
         HDfprintf(stderr, "Blocksize %d should not be bigger than partition size %d\n", blocksize_g, part_size_g);
-        Hgoto_error(-1);                                                                  
+        Hgoto_error(-1);
     }
 
 done:
@@ -228,7 +228,7 @@ int setup_parameters(int argc, char * const argv[])
 int create_wo_file(void)
 {
     int                 blkaddr         = 0;    /* blkaddress of next linked block */
-    h5_posix_io_ret_t   bytes_wrote     = -1;   /* # of bytes written   */ 
+    h5_posix_io_ret_t   bytes_wrote     = -1;   /* # of bytes written   */
 
     /* Create the data file */
     if ((write_fd_g = HDopen(DATAFILE, O_RDWR|O_TRUNC|O_CREAT, H5_POSIX_CREATE_MODE_RW)) < 0) {
@@ -252,8 +252,8 @@ int write_wo_file(void)
     int blkaddr_old=0;
     int i;
     char buffer[BLOCKSIZE_DFT];
-    h5_posix_io_ret_t   bytes_wrote     = -1;   /* # of bytes written   */ 
-    
+    h5_posix_io_ret_t   bytes_wrote     = -1;   /* # of bytes written   */
+
 
     /* write block 1, 2, ... */
     for (i = 1; i < nlinkedblock_g; i++) {
@@ -345,7 +345,7 @@ int read_wo_file(void)
 }
 
 
-/* Overall Algorithm: 
+/* Overall Algorithm:
  * Parse options from user;
  * Generate/pre-created the test file needed and close it;
  * fork: child processes become the reader processes;
@@ -447,7 +447,7 @@ main(int argc, char *argv[])
             Hgoto_error(2);
         }
     }
-    
+
 done:
     /* Print result and exit */
     if (ret_value != 0){
diff --git a/test/unregister.c b/test/unregister.c
index db37f3e..a2a507d 100644
--- a/test/unregister.c
+++ b/test/unregister.c
@@ -55,7 +55,7 @@ const H5Z_class2_t H5Z_DUMMY[1] = {{
  * Function:    do_nothing
  *
  * Purpose:     A dummy compression method that doesn't do anything. This
- *              filter is only for test_unregister_filters. Please don't 
+ *              filter is only for test_unregister_filters. Please don't
  *              use it for other tests because it may mess up this test.
  *
  * Return:      Data chunk size
@@ -124,12 +124,12 @@ test_unregister_filters(hid_t fapl_id)
         goto error;
     if (H5Zfilter_avail(H5Z_FILTER_DUMMY) != TRUE)
         goto error;
- 
+
     /*******************
      * PART 1 - GROUPS *
      *******************/
 
-    /* Use DUMMY filter for creating groups */ 
+    /* Use DUMMY filter for creating groups */
     if((gcpl_id = H5Pcreate(H5P_GROUP_CREATE)) < 0)
         goto error;
     if(H5Pset_filter(gcpl_id, H5Z_FILTER_DUMMY, H5Z_FLAG_MANDATORY, (size_t)0, NULL) < 0)
@@ -145,7 +145,7 @@ test_unregister_filters(hid_t fapl_id)
         if((gid_loop = H5Gcreate2(gid, group_name, H5P_DEFAULT, H5P_DEFAULT, H5P_DEFAULT)) < 0)
             goto error;
         if(H5Gclose(gid_loop) < 0)
-            goto error; 
+            goto error;
     }
 
     /* Flush the file containing the groups */
@@ -174,7 +174,7 @@ test_unregister_filters(hid_t fapl_id)
      * PART 2 - DATASETS *
      *********************/
 
-    /* Use DUMMY filter for creating datasets */ 
+    /* Use DUMMY filter for creating datasets */
     if((dcpl_id = H5Pcreate(H5P_DATASET_CREATE)) < 0)
         goto error;
     if(H5Pset_chunk(dcpl_id, 2, chunk_dims) < 0)
@@ -227,7 +227,7 @@ test_unregister_filters(hid_t fapl_id)
     if(H5Dclose(did) < 0)
         goto error;
 
-    /* Unregister the filter after closing all objects but before closing files. 
+    /* Unregister the filter after closing all objects but before closing files.
      * It should flush all files.
      */
     if(H5Zunregister(H5Z_FILTER_DUMMY) < 0)
diff --git a/test/use_append_chunk.c b/test/use_append_chunk.c
index 35594cf..8fcf0d3 100644
--- a/test/use_append_chunk.c
+++ b/test/use_append_chunk.c
@@ -148,7 +148,7 @@ main(int argc, char *argv[])
         if ((UC_opts.fapl_id = h5_fileaccess()) < 0) {
             HDfprintf(stderr, "can't create creation FAPL\n");
             Hgoto_error(1);
-        }   
+        }
         if (H5Pset_libver_bounds(UC_opts.fapl_id, H5F_LIBVER_LATEST, H5F_LIBVER_LATEST) < 0) {
             HDfprintf(stderr, "can't set creation FAPL libver bounds\n");
             Hgoto_error(1);
@@ -159,7 +159,7 @@ main(int argc, char *argv[])
         } else {
             HDprintf("File created.\n");
         }
-        /* Close FAPL to prevent issues with forking later */ 
+        /* Close FAPL to prevent issues with forking later */
         if (H5Pclose(UC_opts.fapl_id) < 0) {
             HDfprintf(stderr, "can't close creation FAPL\n");
             Hgoto_error(1);
diff --git a/test/use_common.c b/test/use_common.c
index bf29936..b537741 100644
--- a/test/use_common.c
+++ b/test/use_common.c
@@ -157,9 +157,9 @@ void
 show_parameters(options_t * opts)
 {
     HDprintf("===Parameters used:===\n");
-    HDprintf("chunk dims=(%llu, %llu, %llu)\n", (unsigned long long)opts->chunkdims[0], 
+    HDprintf("chunk dims=(%llu, %llu, %llu)\n", (unsigned long long)opts->chunkdims[0],
         (unsigned long long)opts->chunkdims[1], (unsigned long long)opts->chunkdims[2]);
-    HDprintf("dataset max dims=(%llu, %llu, %llu)\n", (unsigned long long)opts->max_dims[0], 
+    HDprintf("dataset max dims=(%llu, %llu, %llu)\n", (unsigned long long)opts->max_dims[0],
         (unsigned long long)opts->max_dims[1], (unsigned long long)opts->max_dims[2]);
     HDprintf("number of planes to write=%llu\n", (unsigned long long)opts->nplanes);
     HDprintf("using SWMR mode=%s\n", opts->use_swmr ? "yes(1)" : "no(0)");
@@ -301,7 +301,7 @@ write_uc_file(hbool_t tosend, hid_t file_id, options_t * opts)
     /* verify chunk_dims against set paramenters */
     if (chunk_dims[0]!=opts->chunkdims[0] || chunk_dims[1] != cz || chunk_dims[2] != cz) {
         HDfprintf(stderr, "chunk size is not as expected. Got dims=(%llu,%llu,%llu)\n",
-            (unsigned long long)chunk_dims[0], (unsigned long long)chunk_dims[1], 
+            (unsigned long long)chunk_dims[0], (unsigned long long)chunk_dims[1],
             (unsigned long long)chunk_dims[2]);
         return -1;
     }
@@ -329,12 +329,12 @@ write_uc_file(hbool_t tosend, hid_t file_id, options_t * opts)
         return -1;
     }
     HDprintf("dataset rank %d, dimensions %llu x %llu x %llu\n",
-           rank, (unsigned long long)(dims[0]), (unsigned long long)(dims[1]), 
+           rank, (unsigned long long)(dims[0]), (unsigned long long)(dims[1]),
            (unsigned long long)(dims[2]));
     /* verify that file space dims are as expected and are consistent with memory space dims */
     if (dims[0] != 0 || dims[1] != memdims[1] || dims[2] != memdims[2]) {
         HDfprintf(stderr, "dataset is not empty. Got dims=(%llu,%llu,%llu)\n",
-            (unsigned long long)dims[0], (unsigned long long)dims[1], 
+            (unsigned long long)dims[0], (unsigned long long)dims[1],
             (unsigned long long)dims[2]);
         return -1;
     }
@@ -529,7 +529,7 @@ read_uc_file(hbool_t towait, options_t * opts)
                 HDprintf("\n");
                 loops_waiting_for_plane=0;
             }
-            HDprintf("reading planes %llu to %llu\n", (unsigned long long)nplanes_seen, 
+            HDprintf("reading planes %llu to %llu\n", (unsigned long long)nplanes_seen,
                 (unsigned long long)dims[0]);
         }
         else {
@@ -579,7 +579,7 @@ read_uc_file(hbool_t towait, options_t * opts)
                         if (++nerrs < ErrorReportMax) {
                             HDfprintf(stderr,
                                 "found error %llu plane(%llu,%llu), expected %llu, got %d\n",
-                                (unsigned long long)nplane, (unsigned long long)j, 
+                                (unsigned long long)nplane, (unsigned long long)j,
                                 (unsigned long long)k, (unsigned long long)nplane, (int)*(bufptr-1));
                         } /* end if should print error */
                     } /* end if value mismatch */
@@ -587,7 +587,7 @@ read_uc_file(hbool_t towait, options_t * opts)
             } /* end for plane first dimension */
             if (nerrs) {
                 nreadererr++;
-                HDfprintf(stderr, "found %d unexpected values in plane %llu\n", nerrs, 
+                HDfprintf(stderr, "found %d unexpected values in plane %llu\n", nerrs,
                     (unsigned long long)nplane);
             }
         } /* end for each plane added since last read */
diff --git a/test/vds.c b/test/vds.c
index c6b88eb..c4d1391 100644
--- a/test/vds.c
+++ b/test/vds.c
@@ -618,7 +618,7 @@ test_api(test_api_config_t config, hid_t fapl, H5F_libver_t low)
         TEST_ERROR
 
     /* Get examination DCPL */
-    if(test_api_get_ex_dcpl(config, fapl, dcpl, &ex_dcpl, vspace[0], filename, 
+    if(test_api_get_ex_dcpl(config, fapl, dcpl, &ex_dcpl, vspace[0], filename,
                             (low >= H5F_LIBVER_V112)?(hsize_t)99:(low >= H5F_LIBVER_V110?174:213)) < 0)
         TEST_ERROR
 
@@ -1026,7 +1026,7 @@ test_api(test_api_config_t config, hid_t fapl, H5F_libver_t low)
     }
 
     /* Get examination DCPL */
-    if(test_api_get_ex_dcpl(config, fapl, dcpl, &ex_dcpl, vspace[0], filename, 
+    if(test_api_get_ex_dcpl(config, fapl, dcpl, &ex_dcpl, vspace[0], filename,
                             (low >= H5F_LIBVER_V112)?(hsize_t)607:(hsize_t)697) < 0)
         TEST_ERROR
 
@@ -12221,9 +12221,9 @@ test_dapl_values(hid_t fapl_id)
  *
  * Purpose:     Tests datasets with virtual layout
  *
- * Note: 
+ * Note:
  *  Tests are modified to test with the low/high bounds combination
- *  set in fapl.  
+ *  set in fapl.
  *  Please see RFC for "H5Sencode/H5Sdecode Format Change".
  *
  * Return:      EXIT_SUCCESS/EXIT_FAILURE
@@ -12273,7 +12273,7 @@ main(void)
             high_string = h5_get_version_string(high);
             HDsprintf(msg, "Testing virtual dataset with file version bounds: (%s, %s):", low_string, high_string);
             HDputs(msg);
-    
+
             for(test_api_config = (int)TEST_API_BASIC; test_api_config < (int)TEST_API_NTESTS; test_api_config++)
                 nerrors += test_api((test_api_config_t)test_api_config, my_fapl, low);
             for(bit_config = 0; bit_config < TEST_IO_NTESTS; bit_config++) {
diff --git a/test/vds_swmr_writer.c b/test/vds_swmr_writer.c
index d62ecaf..d70352d 100644
--- a/test/vds_swmr_writer.c
+++ b/test/vds_swmr_writer.c
@@ -43,7 +43,7 @@ main(int argc, char *argv[])
      ******************************/
 
     /* The file number is passed on the command line.
-     * This is an integer index into the FILE_NAMES array. 
+     * This is an integer index into the FILE_NAMES array.
      */
     if(argc != 2) {
         HDfprintf(stderr, "ERROR: Must pass the source file number on the command line.\n");
diff --git a/test/vol.c b/test/vol.c
index 88354e1..0f8af4f 100644
--- a/test/vol.c
+++ b/test/vol.c
@@ -919,11 +919,11 @@ test_basic_object_operation(void)
         TEST_ERROR;
 
     /* H5Oexists_by_name */
-    if (H5Oexists_by_name(fid, NATIVE_VOL_TEST_GROUP_NAME, H5P_DEFAULT) != TRUE) 
+    if (H5Oexists_by_name(fid, NATIVE_VOL_TEST_GROUP_NAME, H5P_DEFAULT) != TRUE)
         TEST_ERROR;
 
     /* H5Oopen/close */
-    if ((oid = H5Oopen(fid, NATIVE_VOL_TEST_GROUP_NAME, H5P_DEFAULT)) < 0) 
+    if ((oid = H5Oopen(fid, NATIVE_VOL_TEST_GROUP_NAME, H5P_DEFAULT)) < 0)
         TEST_ERROR;
     if (H5Oclose(oid) < 0)
         TEST_ERROR;
diff --git a/testpar/Makefile.am b/testpar/Makefile.am
index 0cdba24..4509945 100644
--- a/testpar/Makefile.am
+++ b/testpar/Makefile.am
@@ -24,7 +24,7 @@ AM_CPPFLAGS+=-I$(top_srcdir)/src -I$(top_srcdir)/test
 # Test scripts--
 #       testpflush.sh:
 TEST_SCRIPT_PARA = testpflush.sh
-SCRIPT_DEPEND = t_pflush1$(EXEEXT) t_pflush2$(EXEEXT) 
+SCRIPT_DEPEND = t_pflush1$(EXEEXT) t_pflush2$(EXEEXT)
 
 check_SCRIPTS = $(TEST_SCRIPT_PARA)
 
diff --git a/testpar/t_2Gio.c b/testpar/t_2Gio.c
index e5ab280..54ea546 100644
--- a/testpar/t_2Gio.c
+++ b/testpar/t_2Gio.c
@@ -533,17 +533,17 @@ dataset_vrfy(hsize_t start[], hsize_t count[], hsize_t stride[], hsize_t block[]
  *        with 2 MPI ranks and with $HDF5TestExpress == 0
  *        i.e. Exhaustive test run is allowed.  Otherwise
  *        the test is skipped.
- * 
+ *
  * Thanks to l.ferraro@cineca.it for the following test::
  *
- * This is a simple test case to reproduce a problem 
- * occurring on LUSTRE filesystem with the creation 
- * of a 4GB dataset using chunking with parallel HDF5. 
- * The test works correctly if disabling chunking or 
- * when the bytes assigned to each process is less 
- * that 4GB. if equal or more, either hangs or results 
- * in a PMPI_Waitall error. 
- * 
+ * This is a simple test case to reproduce a problem
+ * occurring on LUSTRE filesystem with the creation
+ * of a 4GB dataset using chunking with parallel HDF5.
+ * The test works correctly if disabling chunking or
+ * when the bytes assigned to each process is less
+ * that 4GB. if equal or more, either hangs or results
+ * in a PMPI_Waitall error.
+ *
  * $> mpirun -genv I_MPI_EXTRA_FILESYSTEM on
  *           -genv I_MPI_EXTRA_FILESYSTEM_LIST gpfs
  *           -n 1 ./h5_mpi_big_dataset.x 1024 1024 1024
@@ -602,7 +602,7 @@ static int MpioTest2G( MPI_Comm comm )
      */
     file_id = H5Fcreate(H5FILE_NAME, H5F_ACC_TRUNC, H5P_DEFAULT, plist_id);
     VRFY((file_id >= 0), "H5Fcreate succeeded");
-    
+
     H5Pclose(plist_id);
 
     /*
@@ -4961,7 +4961,7 @@ main(int argc, char **argv)
 	/* Display testing information */
 	if (MAINPROCESS)
 	    TestInfo(argv[0]);
-	
+
 	/* setup file access property list */
 	fapl = H5Pcreate (H5P_FILE_ACCESS);
 	H5Pset_fapl_mpio(fapl, test_comm, MPI_INFO_NULL);
diff --git a/testpar/t_coll_chunk.c b/testpar/t_coll_chunk.c
index e950015..740f78e 100644
--- a/testpar/t_coll_chunk.c
+++ b/testpar/t_coll_chunk.c
@@ -16,7 +16,7 @@
 
 #define HYPER 1
 #define POINT 2
-#define ALL 3 
+#define ALL 3
 
 /* some commonly used routines for collective chunk IO tests*/
 
diff --git a/testpar/t_coll_md_read.c b/testpar/t_coll_md_read.c
index d4b2106..d4aaa2e 100644
--- a/testpar/t_coll_md_read.c
+++ b/testpar/t_coll_md_read.c
@@ -48,7 +48,7 @@
  * in strictly non-decreasing order of chunk address. For version 1 and 2 B-trees,
  * this caused the non-participating ranks to issue a collective MPI_Bcast() call
  * which the other ranks did not issue, thus causing a hang.
- * 
+ *
  * However, since these ranks are not actually reading/writing anything, this call
  * can simply be removed and the address used for the read/write can be set to an
  * arbitrary number (0 was chosen).
diff --git a/testpar/t_file.c b/testpar/t_file.c
index 6183b8d..19a75c8 100644
--- a/testpar/t_file.c
+++ b/testpar/t_file.c
@@ -736,7 +736,7 @@ open_file(const char *filename, hid_t fapl, int metadata_write_strategy,
 }
 
 /*
- * NOTE:  See HDFFV-10894 and add tests later to verify MPI-specific properties in the 
+ * NOTE:  See HDFFV-10894 and add tests later to verify MPI-specific properties in the
  *        incoming fapl that could conflict with the existing values in H5F_shared_t on
  *        multiple opens of the same file.
  */
diff --git a/testpar/t_file_image.c b/testpar/t_file_image.c
index 62db11a..81bb7c2 100644
--- a/testpar/t_file_image.c
+++ b/testpar/t_file_image.c
@@ -21,11 +21,11 @@
  *
  * Process zero:
  *
- *	1) Creates a core file with an integer vector data set of 
- * 	   length n (= mpi_size), 
+ *	1) Creates a core file with an integer vector data set of
+ * 	   length n (= mpi_size),
  *
- *	2) Initializes the vector to zero in * location 0, and to -1 
- *         everywhere else.  
+ *	2) Initializes the vector to zero in * location 0, and to -1
+ *         everywhere else.
  *
  *	3) Flushes the core file, and gets an image of it.  Closes
  *	   the core file.
@@ -35,7 +35,7 @@
  *	5) Awaits receipt on a file image from process n-1.
  *
  *	6) opens the image received from process n-1, verifies that
- *	   it contains a vector of length equal to mpi_size, and 
+ *	   it contains a vector of length equal to mpi_size, and
  *	   that the vector contains (0, 1, 2, ... n-1)
  *
  *	7) closes the core file and exits.
@@ -45,7 +45,7 @@
  *	1) Await receipt of file image from process (i - 1).
  *
  *	2) Open the image with the core file driver, verify that i
- *	   contains a vector v of length, and that v[j] = j for 
+ *	   contains a vector v of length, and that v[j] = j for
  *	   0 <= j < i, and that v[j] == -1 for i <= j < n
  *
  *	3) Set v[i] = i in the core file.
@@ -87,13 +87,13 @@ file_image_daisy_chain_test(void)
     MPI_Comm_rank(MPI_COMM_WORLD, &mpi_rank);
 
     /* setup file name */
-    HDsnprintf(file_name, 1024, "file_image_daisy_chain_test_%05d.h5", 
+    HDsnprintf(file_name, 1024, "file_image_daisy_chain_test_%05d.h5",
                (int)mpi_rank);
 
     if(mpi_rank == 0) {
- 
-	/* 1) Creates a core file with an integer vector data set 
-         *    of length mpi_size, 
+
+	/* 1) Creates a core file with an integer vector data set
+         *    of length mpi_size,
          */
 	fapl_id = H5Pcreate(H5P_FILE_ACCESS);
         VRFY((fapl_id >= 0), "creating fapl");
@@ -111,10 +111,10 @@ file_image_daisy_chain_test(void)
         dset_id = H5Dcreate2(file_id, "v", H5T_NATIVE_INT, space_id,
                              H5P_DEFAULT, H5P_DEFAULT, H5P_DEFAULT);
         VRFY((dset_id >= 0), "created data set");
- 
 
-	/* 2) Initialize the vector to zero in location 0, and 
-         *    to -1 everywhere else.  
+
+	/* 2) Initialize the vector to zero in location 0, and
+         *    to -1 everywhere else.
          */
 
 	vector_ptr = (int *)HDmalloc((size_t)(mpi_size) * sizeof(int));
@@ -131,7 +131,7 @@ file_image_daisy_chain_test(void)
         HDfree(vector_ptr);
         vector_ptr = NULL;
 
- 
+
         /* 3) Flush the core file, and get an image of it.  Close
          *    the core file.
          */
@@ -159,14 +159,14 @@ file_image_daisy_chain_test(void)
 	err = H5Pclose(fapl_id);
 	VRFY((err >= 0), "closed fapl(1).");
 
- 
+
         /* 4) Send the image to process 1. */
 
-        mpi_result = MPI_Ssend((void *)(&image_len), (int)sizeof(ssize_t), 
+        mpi_result = MPI_Ssend((void *)(&image_len), (int)sizeof(ssize_t),
 			       MPI_BYTE, 1, 0, MPI_COMM_WORLD);
 	VRFY((mpi_result == MPI_SUCCESS), "sent image size to process 1");
 
-        mpi_result = MPI_Ssend((void *)image_ptr, (int)image_len, 
+        mpi_result = MPI_Ssend((void *)image_ptr, (int)image_len,
 			       MPI_BYTE, 1, 0, MPI_COMM_WORLD);
 	VRFY((mpi_result == MPI_SUCCESS), "sent image to process 1");
 
@@ -190,9 +190,9 @@ file_image_daisy_chain_test(void)
                               &rcvstat);
 	VRFY((mpi_result == MPI_SUCCESS), \
              "received file image from process n-1");
- 
+
 	/* 6) open the image received from process n-1, verify that
-         *    it contains a vector of length equal to mpi_size, and 
+         *    it contains a vector of length equal to mpi_size, and
 	 *    that the vector contains (0, 1, 2, ... n-1).
          */
 	fapl_id = H5Pcreate(H5P_FILE_ACCESS);
@@ -229,7 +229,7 @@ file_image_daisy_chain_test(void)
 	vector_ptr = (int *)HDmalloc((size_t)(mpi_size) * sizeof(int));
         VRFY((vector_ptr != NULL), "allocated in memory rep of vector");
 
-	err = H5Dread(dset_id, H5T_NATIVE_INT, H5S_ALL, H5S_ALL, 
+	err = H5Dread(dset_id, H5T_NATIVE_INT, H5S_ALL, H5S_ALL,
                       H5P_DEFAULT, (void *)vector_ptr);
         VRFY((err >= 0), "read received vector.");
 
@@ -238,7 +238,7 @@ file_image_daisy_chain_test(void)
             if(vector_ptr[i] != i)
                 vector_ok = FALSE;
         VRFY((vector_ok), "verified received vector.");
- 
+
         HDfree(vector_ptr);
         vector_ptr = NULL;
 
@@ -276,9 +276,9 @@ file_image_daisy_chain_test(void)
                               &rcvstat);
 	VRFY((mpi_result == MPI_SUCCESS), \
              "received file image from process mpi_rank-1");
- 
+
 	/* 2) Open the image with the core file driver, verify that it
-	 *    contains a vector v of length, and that v[j] = j for 
+	 *    contains a vector v of length, and that v[j] = j for
 	 *    0 <= j < i, and that v[j] == -1 for i <= j < n
 	 */
 	fapl_id = H5Pcreate(H5P_FILE_ACCESS);
@@ -316,7 +316,7 @@ file_image_daisy_chain_test(void)
 	vector_ptr = (int *)HDmalloc((size_t)(mpi_size) * sizeof(int));
         VRFY((vector_ptr != NULL), "allocated in memory rep of vector");
 
-	err = H5Dread(dset_id, H5T_NATIVE_INT, H5S_ALL, H5S_ALL, 
+	err = H5Dread(dset_id, H5T_NATIVE_INT, H5S_ALL, H5S_ALL,
                        H5P_DEFAULT, (void *)vector_ptr);
         VRFY((err >= 0), "read received vector.");
 
@@ -331,7 +331,7 @@ file_image_daisy_chain_test(void)
 	    }
         }
         VRFY((vector_ok), "verified received vector.");
- 
+
 
 	/* 3) Set v[i] = i in the core file. */
 
@@ -344,7 +344,7 @@ file_image_daisy_chain_test(void)
         HDfree(vector_ptr);
         vector_ptr = NULL;
 
- 
+
 	/* 4) Flush the core file and send it to process (mpi_rank + 1) % n. */
 
 	err = H5Fflush(file_id, H5F_SCOPE_GLOBAL);
@@ -359,14 +359,14 @@ file_image_daisy_chain_test(void)
         bytes_read = H5Fget_file_image(file_id, image_ptr, (size_t)image_len);
         VRFY(bytes_read == image_len, "wrote file into image buffer");
 
-        mpi_result = MPI_Ssend((void *)(&image_len), (int)sizeof(ssize_t), 
-			       MPI_BYTE, (mpi_rank + 1) % mpi_size, 0, 
+        mpi_result = MPI_Ssend((void *)(&image_len), (int)sizeof(ssize_t),
+			       MPI_BYTE, (mpi_rank + 1) % mpi_size, 0,
                                MPI_COMM_WORLD);
 	VRFY((mpi_result == MPI_SUCCESS), \
              "sent image size to process (mpi_rank + 1) % mpi_size");
 
-        mpi_result = MPI_Ssend((void *)image_ptr, (int)image_len, 
-			       MPI_BYTE, (mpi_rank + 1) % mpi_size, 0, 
+        mpi_result = MPI_Ssend((void *)image_ptr, (int)image_len,
+			       MPI_BYTE, (mpi_rank + 1) % mpi_size, 0,
                                MPI_COMM_WORLD);
 	VRFY((mpi_result == MPI_SUCCESS), \
               "sent image to process (mpi_rank + 1) % mpi_size");
@@ -374,7 +374,7 @@ file_image_daisy_chain_test(void)
         HDfree(image_ptr);
         image_ptr = NULL;
         image_len = 0;
- 
+
 	/* 5) close the core file and exit. */
 
         err = H5Sclose(space_id);
diff --git a/testpar/t_init_term.c b/testpar/t_init_term.c
index 6176bb5..0e40fe4 100644
--- a/testpar/t_init_term.c
+++ b/testpar/t_init_term.c
@@ -37,7 +37,7 @@ main (int argc, char **argv)
     /* Initialize and finalize MPI */
     MPI_Init(&argc, &argv);
     MPI_Comm_size(comm, &mpi_size);
-    MPI_Comm_rank(comm, &mpi_rank);  
+    MPI_Comm_rank(comm, &mpi_rank);
 
     if(MAINPROCESS)
 	TESTING("Usage of Serial HDF5 after MPI_Finalize() is called");
diff --git a/testpar/t_mpi.c b/testpar/t_mpi.c
index 9e5d839..0719ca6 100644
--- a/testpar/t_mpi.c
+++ b/testpar/t_mpi.c
@@ -302,7 +302,7 @@ static int test_mpio_gb_file(char *filename) {
                             "proc %d: write to mpi_off=%016llx, %lld\n",
                             mpi_rank, mpi_off, mpi_off);
                 /* set data to some trivial pattern for easy verification */
-                for (j = 0; j < MB; j++) 
+                for (j = 0; j < MB; j++)
                     *(buf + j) = (int8_t)(i * mpi_size + mpi_rank);
                 if (VERBOSE_MED)
                     HDfprintf(stdout,
diff --git a/testpar/t_pread.c b/testpar/t_pread.c
index 74feeb6..ba4165e 100644
--- a/testpar/t_pread.c
+++ b/testpar/t_pread.c
@@ -281,7 +281,7 @@ generate_test_file( MPI_Comm comm, int mpi_rank, int group_id )
 
     /* create a chunked dataset */
     chunk[0] = COUNT/8;
-    
+
     if ( pass ) {
       if ( (dcpl_id = H5Pcreate (H5P_DATASET_CREATE)) < 0 ) {
         pass = false;
@@ -295,9 +295,9 @@ generate_test_file( MPI_Comm comm, int mpi_rank, int group_id )
         failure_mssg = "H5Pset_chunk() failed.\n";
       }
     }
-    
+
     if ( pass ) {
-      
+
       if ( (dset_id_ch = H5Dcreate2(file_id, "dataset0_chunked", H5T_NATIVE_FLOAT,
                                     filespace, H5P_DEFAULT, dcpl_id,
                                     H5P_DEFAULT)) < 0 ) {
@@ -319,7 +319,7 @@ generate_test_file( MPI_Comm comm, int mpi_rank, int group_id )
         failure_mssg = "H5Pclose(dcpl_id) failed.\n";
       }
     }
-    
+
     if ( pass || (dset_id_ch != -1)) {
       if ( H5Dclose(dset_id_ch) < 0 ) {
         pass = false;
@@ -698,8 +698,8 @@ test_parallel_read(MPI_Comm comm, int mpi_rank, int mpi_size, int group_id)
         data_slice = NULL;
     }
 
-    /* 
-     * Test reading proc0-read-and-bcast with sub-communicators 
+    /*
+     * Test reading proc0-read-and-bcast with sub-communicators
      */
 
     /* Don't test with more than LIMIT_NPROC processes to avoid memory issues */
@@ -798,7 +798,7 @@ test_parallel_read(MPI_Comm comm, int mpi_rank, int mpi_size, int group_id)
           nextValue = 0;
         else                                /* test 2 group 1 */
           nextValue = (float)((hsize_t)( mpi_size / 2 )*count);
-        
+
         i = 0;
         while ( ( pass ) && ( i < (hsize_t)dset_size ) ) {
           /* what we really want is data_slice[i] != nextValue --
@@ -863,7 +863,7 @@ test_parallel_read(MPI_Comm comm, int mpi_rank, int mpi_size, int group_id)
           nextValue = 0;
         else                                /* test 2 group 1 */
           nextValue = (float)((hsize_t)( mpi_size / 2 )*count);
-        
+
         i = 0;
         while ( ( pass ) && ( i < (hsize_t)dset_size ) ) {
           /* what we really want is data_slice[i] != nextValue --
@@ -893,8 +893,8 @@ test_parallel_read(MPI_Comm comm, int mpi_rank, int mpi_size, int group_id)
         data_slice = NULL;
       }
 
-      /* 
-       * Read an H5S_ALL filespace into a hyperslab defined memory space 
+      /*
+       * Read an H5S_ALL filespace into a hyperslab defined memory space
        */
 
       if ( (data_slice = (float *)HDmalloc((size_t)(dset_size*2)*filetype_size)) == NULL ) {
@@ -979,14 +979,14 @@ test_parallel_read(MPI_Comm comm, int mpi_rank, int mpi_size, int group_id)
           i++;
         }
       }
-      
+
       if ( pass || (memspace != -1) ) {
         if ( H5Sclose(memspace) < 0 ) {
           pass = false;
           failure_mssg = "H5Sclose(memspace) failed.\n";
         }
       }
-      
+
       /* free data_slice if it has been allocated */
       if ( data_slice != NULL ) {
         HDfree(data_slice);
diff --git a/testpar/t_prestart.c b/testpar/t_prestart.c
index 71a8277..da6bbe0 100644
--- a/testpar/t_prestart.c
+++ b/testpar/t_prestart.c
@@ -48,11 +48,11 @@ main (int argc, char **argv)
 
     MPI_Init(&argc, &argv);
     MPI_Comm_size(comm, &mpi_size);
-    MPI_Comm_rank(comm, &mpi_rank);  
+    MPI_Comm_rank(comm, &mpi_rank);
 
     if(MAINPROCESS)
 	TESTING("proper shutdown of HDF5 library");
- 
+
     /* Set up file access property list with parallel I/O access */
     fapl = H5Pcreate(H5P_FILE_ACCESS);
     VRFY((fapl >= 0), "H5Pcreate succeeded");
@@ -121,7 +121,7 @@ main (int argc, char **argv)
     HDremove(filename);
 
     /* release data buffers */
-    if(data_array) 
+    if(data_array)
         HDfree(data_array);
 
     nerrors += GetTestNumErrs();
diff --git a/testpar/t_prop.c b/testpar/t_prop.c
index 62e4dde..dde322d 100644
--- a/testpar/t_prop.c
+++ b/testpar/t_prop.c
@@ -97,7 +97,7 @@ test_plist_ed(void)
 
     int mpi_size, mpi_rank, recv_proc;
 
-    hsize_t chunk_size = 16384;	/* chunk size */ 
+    hsize_t chunk_size = 16384;	/* chunk size */
     double fill = 2.7f;         /* Fill value */
     size_t nslots = 521*2;
     size_t nbytes = 1048576 * 10;
@@ -165,16 +165,16 @@ test_plist_ed(void)
     VRFY((ret>=0), "set fill-value succeeded");
 
     max_size[0] = 100;
-    ret = H5Pset_external(dcpl, "ext1.data", (off_t)0, 
+    ret = H5Pset_external(dcpl, "ext1.data", (off_t)0,
                           (hsize_t)(max_size[0] * sizeof(int)/4));
     VRFY((ret>=0), "set external succeeded");
-    ret = H5Pset_external(dcpl, "ext2.data", (off_t)0, 
+    ret = H5Pset_external(dcpl, "ext2.data", (off_t)0,
                           (hsize_t)(max_size[0] * sizeof(int)/4));
     VRFY((ret>=0), "set external succeeded");
-    ret = H5Pset_external(dcpl, "ext3.data", (off_t)0, 
+    ret = H5Pset_external(dcpl, "ext3.data", (off_t)0,
                           (hsize_t)(max_size[0] * sizeof(int)/4));
     VRFY((ret>=0), "set external succeeded");
-    ret = H5Pset_external(dcpl, "ext4.data", (off_t)0, 
+    ret = H5Pset_external(dcpl, "ext4.data", (off_t)0,
                           (hsize_t)(max_size[0] * sizeof(int)/4));
     VRFY((ret>=0), "set external succeeded");
 
diff --git a/testpar/t_pshutdown.c b/testpar/t_pshutdown.c
index 55073c8..6a35fb2 100644
--- a/testpar/t_pshutdown.c
+++ b/testpar/t_pshutdown.c
@@ -51,11 +51,11 @@ main (int argc, char **argv)
 
     MPI_Init(&argc, &argv);
     MPI_Comm_size(comm, &mpi_size);
-    MPI_Comm_rank(comm, &mpi_rank);  
+    MPI_Comm_rank(comm, &mpi_rank);
 
     if(MAINPROCESS)
 	TESTING("proper shutdown of HDF5 library");
- 
+
     /* Set up file access property list with parallel I/O access */
     fapl = H5Pcreate(H5P_FILE_ACCESS);
     VRFY((fapl >= 0), "H5Pcreate succeeded");
@@ -107,7 +107,7 @@ main (int argc, char **argv)
     VRFY((ret >= 0), "H5Dwrite succeeded");
 
     /* release data buffers */
-    if(data_array) 
+    if(data_array)
         HDfree(data_array);
 
     MPI_Finalize();
diff --git a/testpar/testpar.h b/testpar/testpar.h
index 2c1bce2..f76de51 100644
--- a/testpar/testpar.h
+++ b/testpar/testpar.h
@@ -34,7 +34,7 @@
     if (VERBOSE_MED && *mesg != '\0')                                  \
         HDprintf("%s\n", mesg)
 
-/* 
+/*
  * VRFY: Verify if the condition val is true.
  * If it is true, then call MESG to print mesg, depending on the verbose
  * level.
diff --git a/tools/lib/h5trav.h b/tools/lib/h5trav.h
index 88473ad..affdf99 100644
--- a/tools/lib/h5trav.h
+++ b/tools/lib/h5trav.h
@@ -133,8 +133,8 @@ extern "C" {
  *-------------------------------------------------------------------------
  */
 H5TOOLS_DLL void h5trav_set_index(H5_index_t print_index_by, H5_iter_order_t print_index_order);
-H5TOOLS_DLL int h5trav_visit(hid_t file_id, const char *grp_name, 
-    hbool_t visit_start, hbool_t recurse, h5trav_obj_func_t visit_obj, 
+H5TOOLS_DLL int h5trav_visit(hid_t file_id, const char *grp_name,
+    hbool_t visit_start, hbool_t recurse, h5trav_obj_func_t visit_obj,
     h5trav_lnk_func_t visit_lnk, void *udata, unsigned fields);
 H5TOOLS_DLL herr_t symlink_visit_add(symlink_trav_t *visited, H5L_type_t type, const char *file, const char *path);
 H5TOOLS_DLL hbool_t symlink_is_visited(symlink_trav_t *visited, H5L_type_t type, const char *file, const char *path);
diff --git a/tools/src/Makefile.am b/tools/src/Makefile.am
index beceee5..93fcc1e 100644
--- a/tools/src/Makefile.am
+++ b/tools/src/Makefile.am
@@ -23,6 +23,6 @@ CONFIG=ordered
 
 # All subdirectories
 SUBDIRS=h5diff h5ls h5dump misc h5import h5repack h5jam h5copy \
-	h5format_convert h5stat 
+	h5format_convert h5stat
 
 include $(top_srcdir)/config/conclude.am
diff --git a/tools/src/h5format_convert/h5format_convert.c b/tools/src/h5format_convert/h5format_convert.c
index ae72ea9..2c4cf41 100644
--- a/tools/src/h5format_convert/h5format_convert.c
+++ b/tools/src/h5format_convert/h5format_convert.c
@@ -18,7 +18,7 @@
 
 /*
  * We include the private header file so we can get to the uniform
- * programming environment it declares.  
+ * programming environment it declares.
  * HDF5 API functions (except for H5G_basename())
  */
 #include "H5private.h"
@@ -74,7 +74,7 @@ static struct long_options l_opts[] = {
  *
  *-------------------------------------------------------------------------
  */
-static void usage(const char *prog) 
+static void usage(const char *prog)
 {
     HDfprintf(stdout, "usage: %s [OPTIONS] file_name\n", prog);
     HDfprintf(stdout, "  OPTIONS\n");
@@ -114,7 +114,7 @@ static void usage(const char *prog)
  *-------------------------------------------------------------------------
  */
 static int
-parse_command_line(int argc, const char **argv) 
+parse_command_line(int argc, const char **argv)
 {
     int opt;
 
@@ -332,7 +332,7 @@ done:
     }
     else if(verbose_g)
         HDfprintf(stdout, "Close the dataset\n");
-    
+
     /* Close the dataset creation property list */
     if(H5Pclose(dcpl) < 0) {
         error_msg("unable to close dataset creation property list\n");
@@ -475,7 +475,7 @@ done:
 	HDfree(fname_g);
     if(dname_g)
 	HDfree(dname_g);
-    
+
     H5Eset_auto2(H5E_DEFAULT, func, edata);
     leave(h5tools_getstatus());
 
diff --git a/tools/src/h5repack/h5repack_copy.c b/tools/src/h5repack/h5repack_copy.c
index ae93b30..b1d6ab4 100644
--- a/tools/src/h5repack/h5repack_copy.c
+++ b/tools/src/h5repack/h5repack_copy.c
@@ -794,7 +794,7 @@ do_copy_objects(hid_t fidin, hid_t fidout, trav_table_t *travt,
                     else
                         if (H5Pget_vol_id(options->fout_fapl, &out_vol_id) < 0)
                             H5TOOLS_GOTO_ERROR((-1), "H5Pget_vol_id failed");
- 
+
                     if (in_vol_id != out_vol_id)
                         use_h5ocopy = FALSE;
 
diff --git a/tools/test/h5dump/h5dumpgentest.c b/tools/test/h5dump/h5dumpgentest.c
index 550b182..54b390f 100644
--- a/tools/test/h5dump/h5dumpgentest.c
+++ b/tools/test/h5dump/h5dumpgentest.c
@@ -3780,9 +3780,9 @@ void gent_multi(void)
     char *sv_data = NULL;
     haddr_t memb_addr[H5FD_MEM_NTYPES];
 
-    sv_data = (char *)HDcalloc(H5FD_MEM_NTYPES * 1024, sizeof(char));                          
-    sv = (char **)HDcalloc(H5FD_MEM_NTYPES, sizeof(sv_data));                            
-    for (i = 0; i < H5FD_MEM_NTYPES; i++)                                                     
+    sv_data = (char *)HDcalloc(H5FD_MEM_NTYPES * 1024, sizeof(char));
+    sv = (char **)HDcalloc(H5FD_MEM_NTYPES, sizeof(sv_data));
+    for (i = 0; i < H5FD_MEM_NTYPES; i++)
         sv[i] = sv_data + (i * 1024);
 
     fapl = H5Pcreate(H5P_FILE_ACCESS);
diff --git a/tools/test/h5format_convert/h5fc_chk_idx.c b/tools/test/h5format_convert/h5fc_chk_idx.c
index 02cc25f..2fbbec4 100644
--- a/tools/test/h5format_convert/h5fc_chk_idx.c
+++ b/tools/test/h5format_convert/h5fc_chk_idx.c
@@ -13,7 +13,7 @@
 
 /*
  * A program to verify that the chunk indexing type of a dataset in a file
- * is version 1 B-tree.  
+ * is version 1 B-tree.
  * This is to support the testing of the tool "h5format_convert".
  */
 
@@ -32,7 +32,7 @@ usage(void)
 /*-------------------------------------------------------------------------
  * Function:	main
  *
- * Purpose:	To check that the chunk indexing type for the dataset in 
+ * Purpose:	To check that the chunk indexing type for the dataset in
  *		the file is version 1 B-tree.
  *
  * Return:	0 -- the indexing type is version 1 B-tree
@@ -90,7 +90,7 @@ main(int argc, char *argv[])
     } /* end if */
 
     /* Return success when the chunk indexing type is version 1 B-tree */
-    if(idx_type == H5D_CHUNK_IDX_BTREE) 
+    if(idx_type == H5D_CHUNK_IDX_BTREE)
 	HDexit(EXIT_SUCCESS);
     else {
 	HDfprintf(stderr, "Error: chunk indexing type is %d\n", idx_type);
diff --git a/tools/test/h5repack/Makefile.am b/tools/test/h5repack/Makefile.am
index 38f7b2f..29906a1 100644
--- a/tools/test/h5repack/Makefile.am
+++ b/tools/test/h5repack/Makefile.am
@@ -42,7 +42,7 @@ LDADD=../../src/h5repack/libh5repack.la $(LIBH5TOOLS) $(LIBH5TEST) $(LIBHDF5)
 
 testh5repack_detect_szip_SOURCES=testh5repack_detect_szip.c
 
-h5repacktst_SOURCES=h5repacktst.c 
+h5repacktst_SOURCES=h5repacktst.c
 
 
 if HAVE_SHARED_CONDITIONAL
diff --git a/tools/test/misc/vds/UC_1.h b/tools/test/misc/vds/UC_1.h
index 9d1f758..d922d22 100644
--- a/tools/test/misc/vds/UC_1.h
+++ b/tools/test/misc/vds/UC_1.h
@@ -49,7 +49,7 @@
 
    |               |
    +-------M-------+
- 
+
 
         dim[0]
        /
diff --git a/tools/test/misc/vds/UC_1_one_dim_gen.c b/tools/test/misc/vds/UC_1_one_dim_gen.c
index b5ddae3..7c4201e 100644
--- a/tools/test/misc/vds/UC_1_one_dim_gen.c
+++ b/tools/test/misc/vds/UC_1_one_dim_gen.c
@@ -44,7 +44,7 @@ static char UC_1_VDS_FILE_NAME[NAME_LEN] = "1_vds.h5";
 /* Dataset names */
 static char UC_1_SOURCE_DSET_NAME[NAME_LEN] = "source_dset";
 static char UC_1_VDS_DSET_NAME[NAME_LEN]    = "vds_dset";
-    
+
 /* Fill values */
 static int UC_1_FILL_VALUES[UC_1_N_SOURCES] = {
     -1,
@@ -162,7 +162,7 @@ main(void)
 
             value = ((i + 1) * 10) + j;
             for(k = 0; k < count; k++)
-               buffer[k] = value; 
+               buffer[k] = value;
 
             start[0] = (hsize_t)j;
             start[1] = 0;
diff --git a/tools/test/misc/vds/UC_2.h b/tools/test/misc/vds/UC_2.h
index a3ee0f7..07f9b9a 100644
--- a/tools/test/misc/vds/UC_2.h
+++ b/tools/test/misc/vds/UC_2.h
@@ -45,7 +45,7 @@
     |
     |
    dim[1]
- 
+
  */
 
 #define UC_2_N_SOURCES      5
@@ -98,7 +98,7 @@ static char UC_2_FILE_NAMES[UC_2_N_SOURCES][NAME_LEN] = {
 
 /* VDS file name */
 #define UC_2_VDS_FILE_NAME    "2_vds.h5"
-    
+
 /* Dataset names */
 #define UC_2_SOURCE_DSET_NAME   "source_dset"
 #define UC_2_SOURCE_DSET_PATH   "/source_dset"
diff --git a/tools/test/misc/vds/UC_2_two_dims_gen.c b/tools/test/misc/vds/UC_2_two_dims_gen.c
index 8e1554b..b9799d6 100644
--- a/tools/test/misc/vds/UC_2_two_dims_gen.c
+++ b/tools/test/misc/vds/UC_2_two_dims_gen.c
@@ -168,7 +168,7 @@ main(void)
 
             value = ((i + 1) * 10) + j;
             for(k = 0; k < count; k++)
-               buffer[k] = value; 
+               buffer[k] = value;
 
             start[0] = (hsize_t)j;
             start[1] = 0;
diff --git a/tools/test/perform/chunk_cache.c b/tools/test/perform/chunk_cache.c
index 5557558..e594e34 100644
--- a/tools/test/perform/chunk_cache.c
+++ b/tools/test/perform/chunk_cache.c
@@ -112,51 +112,51 @@ static int create_dset1(hid_t file)
     hsize_t      chunk_dims[RANK] = {CHUNK1_DIM1, CHUNK1_DIM2};
     int          data[DSET1_DIM1][DSET1_DIM2];    /* data for writing */
     int          i, j;
-    
+
     /* Create the data space. */
     if((dataspace = H5Screate_simple (RANK, dims, NULL)) < 0)
         goto error;
-    
+
     /* Modify dataset creation properties, i.e. enable chunking  */
     if((dcpl = H5Pcreate (H5P_DATASET_CREATE)) < 0)
         goto error;
     if(H5Pset_chunk (dcpl, RANK, chunk_dims) < 0)
         goto error;
-    
+
     /* Set the dummy filter simply for counting the number of bytes being read into the memory */
     if(H5Zregister(H5Z_COUNTER) < 0)
         goto error;
-    
+
     if(H5Pset_filter(dcpl, FILTER_COUNTER, 0, 0, NULL) < 0)
         goto error;
-    
+
     /* Create a new dataset within the file using chunk creation properties.  */
     if((dataset = H5Dcreate2 (file, DSET1_NAME, H5T_NATIVE_INT, dataspace,
                           H5P_DEFAULT, dcpl, H5P_DEFAULT)) < 0)
         goto error;
-    
+
     for (i = 0; i < DSET1_DIM1; i++)
         for (j = 0; j < DSET1_DIM2; j++)
             data[i][j] = i+j;
-    
+
     /* Write data to dataset */
     if(H5Dwrite (dataset, H5T_NATIVE_INT, H5S_ALL, H5S_ALL,
                        H5P_DEFAULT, data) < 0)
         goto error;
-    
+
     /* Close resources */
     H5Dclose (dataset);
     H5Pclose (dcpl);
     H5Sclose (dataspace);
     return 0;
-    
+
 error:
     H5E_BEGIN_TRY {
         H5Dclose (dataset);
         H5Pclose (dcpl);
         H5Sclose (dataspace);
     } H5E_END_TRY;
-    
+
     return 1;
 }
 
@@ -173,51 +173,51 @@ static int create_dset2(hid_t file)
     hsize_t      chunk_dims[RANK] = {CHUNK2_DIM1, CHUNK2_DIM2};
     int          data[DSET2_DIM1][DSET2_DIM2];    /* data for writing */
     int          i, j;
-    
+
     /* Create the data space. */
     if((dataspace = H5Screate_simple (RANK, dims, NULL)) < 0)
         goto error;
-    
+
     /* Modify dataset creation properties, i.e. enable chunking  */
     if((dcpl = H5Pcreate (H5P_DATASET_CREATE)) < 0)
         goto error;
     if(H5Pset_chunk (dcpl, RANK, chunk_dims) < 0)
         goto error;
-    
+
     /* Set the dummy filter simply for counting the number of bytes being read into the memory */
     if(H5Zregister(H5Z_COUNTER) < 0)
         goto error;
     if(H5Pset_filter(dcpl, FILTER_COUNTER, 0, 0, NULL) < 0)
         goto error;
-    
+
     /* Create a new dataset within the file using chunk creation properties.  */
     if((dataset = H5Dcreate2 (file, DSET2_NAME, H5T_NATIVE_INT, dataspace,
                           H5P_DEFAULT, dcpl, H5P_DEFAULT)) < 0)
         goto error;
-    
+
     for (i = 0; i < DSET2_DIM1; i++)
         for (j = 0; j < DSET2_DIM2; j++)
             data[i][j] = i+j;
-    
+
     /* Write data to dataset */
     if(H5Dwrite (dataset, H5T_NATIVE_INT, H5S_ALL, H5S_ALL,
                        H5P_DEFAULT, data) < 0)
         goto error;
-    
+
     /* Close resources */
     H5Dclose (dataset);
     H5Pclose (dcpl);
     H5Sclose (dataspace);
-    
+
     return 0;
-    
+
 error:
     H5E_BEGIN_TRY {
         H5Dclose (dataset);
         H5Pclose (dcpl);
         H5Sclose (dataspace);
     } H5E_END_TRY;
-    
+
     return 1;
 }
 /*---------------------------------------------------------------------------
@@ -230,56 +230,56 @@ static int check_partial_chunks_perf(hid_t file)
     hid_t        filespace = H5I_INVALID_HID;
     hid_t        memspace = H5I_INVALID_HID;
     hid_t        dapl = H5I_INVALID_HID;
-    
+
     int          rdata[DSET1_DIM2];   /* data for reading */
     int          i;
-    
+
     hsize_t      row_rank = 1;
     hsize_t      row_dim[1] = {DSET1_DIM2};
     hsize_t      start[RANK] = {0, 0};
     hsize_t      count[RANK] = {1, DSET1_DIM2};
     double       start_t, end_t;
-    
+
     if((dapl = H5Pcreate(H5P_DATASET_ACCESS)) < 0)
         goto error;
     if(H5Pset_chunk_cache (dapl, RDCC_NSLOTS, RDCC_NBYTES, RDCC_W0) < 0)
         goto error;
 
     dataset = H5Dopen2 (file, DSET1_NAME, dapl);
-    
+
     H5_CHECK_OVERFLOW(row_rank, hsize_t, int);
     memspace = H5Screate_simple((int)row_rank, row_dim, NULL);
     filespace = H5Dget_space(dataset);
-    
+
     nbytes_global = 0;
-    
+
     start_t = retrieve_time();
-    
+
     /* Read the data row by row */
     for(i = 0; i < DSET1_DIM1; i++) {
         start[0] = (hsize_t)i;
         if(H5Sselect_hyperslab(filespace, H5S_SELECT_SET,
                                      start, NULL, count, NULL) < 0)
             goto error;
-        
+
         if(H5Dread (dataset, H5T_NATIVE_INT, memspace, filespace,
                           H5P_DEFAULT, rdata) < 0)
             goto error;
     }
-    
+
     end_t = retrieve_time();
-    
+
 #ifdef H5_HAVE_GETTIMEOFDAY
     printf("1. Partial chunks: total read time is %lf; number of bytes being read from file is %lu\n", (end_t -start_t), nbytes_global);
 #else
     printf("1. Partial chunks: no total read time because gettimeofday() is not available; number of bytes being read from file is %lu\n", nbytes_global);
 #endif
-    
+
     H5Dclose (dataset);
     H5Sclose (filespace);
     H5Sclose (memspace);
     H5Pclose (dapl);
-    
+
     return 0;
 error:
     H5E_BEGIN_TRY {
@@ -302,21 +302,21 @@ static int check_hash_value_perf(hid_t file)
     hid_t        filespace = H5I_INVALID_HID;
     hid_t        memspace = H5I_INVALID_HID;
     hid_t        dapl = H5I_INVALID_HID;
-    
+
     int          rdata[DSET2_DIM1];   /* data for reading */
     int          i;
-    
+
     hsize_t      column_rank = 1;
     hsize_t      column_dim[1] = {DSET2_DIM1};
     hsize_t      start[RANK] = {0, 0};
     hsize_t      count[RANK] = {DSET2_DIM1, 1};
     double       start_t, end_t;
-    
+
     if((dapl = H5Pcreate(H5P_DATASET_ACCESS)) < 0)
         goto error;
     if(H5Pset_chunk_cache (dapl, RDCC_NSLOTS, RDCC_NBYTES, RDCC_W0) < 0)
         goto error;
-    
+
     if((dataset = H5Dopen2 (file, DSET2_NAME, dapl)) < 0)
         goto error;
 
@@ -325,37 +325,37 @@ static int check_hash_value_perf(hid_t file)
         goto error;
     if((filespace = H5Dget_space(dataset)) < 0)
         goto error;
-    
+
     nbytes_global = 0;
-    
+
     start_t = retrieve_time();
-    
+
     /* Read the data column by column */
     for(i = 0; i < DSET2_DIM2; i++) {
         start[1] = (hsize_t)i;
         if(H5Sselect_hyperslab(filespace, H5S_SELECT_SET,
                                      start, NULL, count, NULL) < 0)
             goto error;
-        
+
         if(H5Dread (dataset, H5T_NATIVE_INT, memspace, filespace,
                           H5P_DEFAULT, rdata) < 0)
             goto error;
     }
-    
+
     end_t = retrieve_time();
-    
+
 #ifdef H5_HAVE_GETTIMEOFDAY
     printf("2. Hash value: total read time is %lf; number of bytes being read from file is %lu\n", (end_t -start_t), nbytes_global);
 #else
     printf("2. Hash value: no total read time because gettimeofday() is not available; number of bytes being read from file is %lu\n", nbytes_global);
 #endif
-    
+
     H5Dclose (dataset);
     H5Sclose (filespace);
     H5Sclose (memspace);
     H5Pclose (dapl);
     return 0;
-    
+
 error:
     H5E_BEGIN_TRY {
         H5Dclose (dataset);
@@ -377,14 +377,14 @@ main (void)
 {
     hid_t        file;                          /* handles */
     int          nerrors = 0;
-    
+
     /* Create a new file. If file exists its contents will be overwritten. */
     if((file = H5Fcreate (FILENAME, H5F_ACC_TRUNC, H5P_DEFAULT, H5P_DEFAULT)) < 0)
         goto error;
 
     nerrors += create_dset1(file);
     nerrors += create_dset2(file);
-    
+
     if(H5Fclose (file) < 0)
         goto error;
 
@@ -394,14 +394,14 @@ main (void)
 
     nerrors += check_partial_chunks_perf(file);
     nerrors += check_hash_value_perf(file);
-    
+
     if(H5Fclose (file) < 0)
         goto error;
-    
+
     if (nerrors>0) goto error;
     cleanup();
     return 0;
-    
+
 error:
     fprintf(stderr, "*** ERRORS DETECTED ***\n");
     return 1;
diff --git a/tools/test/perform/direct_write_perf.c b/tools/test/perform/direct_write_perf.c
index f13cd24..20b7237 100644
--- a/tools/test/perform/direct_write_perf.c
+++ b/tools/test/perform/direct_write_perf.c
@@ -75,7 +75,7 @@ const char *FILENAME[] = {
 #define NX     100
 #define NY     1000
 #define NZ     250
-#define CHUNK_NX     1 
+#define CHUNK_NX     1
 #define CHUNK_NY     1000
 #define CHUNK_NZ     250
 
@@ -108,7 +108,7 @@ void reportTime(struct timeval start, double mbytes)
     } /* end if */
 
 /*printf("mbytes=%lf, sec=%lf, usec=%lf\n", mbytes, (double)timeval_diff.tv_sec, (double)timeval_diff.tv_usec);*/
-    printf("MBytes/second: %lf\n", (double)mbytes/((double)timeval_diff.tv_sec+((double)timeval_diff.tv_usec/(double)1000000.0)));        
+    printf("MBytes/second: %lf\n", (double)mbytes/((double)timeval_diff.tv_sec+((double)timeval_diff.tv_usec/(double)1000000.0)));
 }
 
 /*--------------------------------------------------
@@ -121,7 +121,7 @@ int create_file(hid_t fapl_id)
     hid_t       fapl;
     hid_t       cparms;
     hid_t       dataspace, dataset;
-    hsize_t     dims[RANK]  = {NX, NY, NZ};        
+    hsize_t     dims[RANK]  = {NX, NY, NZ};
     hsize_t     chunk_dims[RANK] ={CHUNK_NX, CHUNK_NY, CHUNK_NZ};
     unsigned int         aggression = 9;     /* Compression aggression setting */
     int         ret;
@@ -198,7 +198,7 @@ int create_file(hid_t fapl_id)
     if(H5Dclose(dataset) < 0)
         TEST_ERROR;
 
-    if(H5Fclose(file) < 0) 
+    if(H5Fclose(file) < 0)
         TEST_ERROR;
 
     if(H5Sclose(dataspace) < 0)
@@ -223,7 +223,7 @@ int create_file(hid_t fapl_id)
     /* Initialize data for chunks */
     for(i = 0; i < NX; i++) {
 	p = direct_buf[i] = (unsigned int*)malloc(CHUNK_NY*CHUNK_NZ*sizeof(unsigned int));
-        
+
         for(j=0; j < CHUNK_NY*CHUNK_NZ; j++, p++)
             *p = rand() % 65000;
 
@@ -267,7 +267,7 @@ error:
 }
 
 /*--------------------------------------------------
- *  Benchmark the performance of the new function 
+ *  Benchmark the performance of the new function
  *  with precompressed data.
  *--------------------------------------------------
  */
@@ -283,8 +283,8 @@ test_direct_write_uncompressed_data(hid_t fapl_id)
     unsigned    filter_mask = 0;
     hsize_t     offset[RANK] = {0, 0, 0};
 
-    struct timeval timeval_start;    
-    
+    struct timeval timeval_start;
+
     TESTING("H5Dwrite_chunk for uncompressed data");
 
     if((dxpl = H5Pcreate(H5P_DATASET_XFER)) < 0)
@@ -301,8 +301,8 @@ test_direct_write_uncompressed_data(hid_t fapl_id)
         TEST_ERROR;
 
 
-    /* Write the compressed chunk data repeatedly to cover all the chunks in the 
-     * dataset, using the direct writing function.     */ 
+    /* Write the compressed chunk data repeatedly to cover all the chunks in the
+     * dataset, using the direct writing function.     */
     for(i=0; i<NX; i++) {
         status = H5Dwrite_chunk(dataset, dxpl, filter_mask, offset, CHUNK_NY*CHUNK_NZ*sizeof(unsigned int), direct_buf[i]);
         (offset[0])++;
@@ -315,8 +315,8 @@ test_direct_write_uncompressed_data(hid_t fapl_id)
     H5Pclose(dxpl);
     H5Fclose(file);
 
-    /* Report the performance */ 
-    reportTime(timeval_start, (double)(NX*NY*NZ*sizeof(unsigned int)/MB));    
+    /* Report the performance */
+    reportTime(timeval_start, (double)(NX*NY*NZ*sizeof(unsigned int)/MB));
 
     PASSED();
     return 0;
@@ -332,7 +332,7 @@ error:
 
 
 /*--------------------------------------------------
- *  Benchmark the performance of the new function 
+ *  Benchmark the performance of the new function
  *  with precompressed data.
  *--------------------------------------------------
  */
@@ -348,8 +348,8 @@ test_direct_write_compressed_data(hid_t fapl_id)
     unsigned    filter_mask = 0;
     hsize_t     offset[RANK] = {0, 0, 0};
 
-    struct timeval timeval_start;    
-    
+    struct timeval timeval_start;
+
     TESTING("H5DOwrite_chunk for pre-compressed data");
 
     if((dxpl = H5Pcreate(H5P_DATASET_XFER)) < 0)
@@ -366,8 +366,8 @@ test_direct_write_compressed_data(hid_t fapl_id)
         TEST_ERROR;
 
 
-    /* Write the compressed chunk data repeatedly to cover all the chunks in the 
-     * dataset, using the direct writing function.     */ 
+    /* Write the compressed chunk data repeatedly to cover all the chunks in the
+     * dataset, using the direct writing function.     */
     for(i=0; i<NX; i++) {
         status = H5Dwrite_chunk(dataset, dxpl, filter_mask, offset, data_size[i], outbuf[i]);
         (offset[0])++;
@@ -379,9 +379,9 @@ test_direct_write_compressed_data(hid_t fapl_id)
     H5Dclose(dataset);
     H5Pclose(dxpl);
     H5Fclose(file);
-  
-    /* Report the performance */ 
-    reportTime(timeval_start, (double)(total_size/MB));    
+
+    /* Report the performance */
+    reportTime(timeval_start, (double)(total_size/MB));
 
     PASSED();
     return 0;
@@ -416,7 +416,7 @@ test_compressed_write(hid_t fapl_id)
     hsize_t count[RANK];  /* Block count */
     hsize_t block[RANK];  /* Block sizes */
 
-    struct timeval timeval_start;    
+    struct timeval timeval_start;
 
     TESTING("H5Dwrite with compression enabled");
 
@@ -443,14 +443,14 @@ test_compressed_write(hid_t fapl_id)
     stride[0] = stride[1] = stride[2] = 1;
     count[0]  = count[1]  = count[2] = 1;
     block[0]  = CHUNK_NX; block[1]  = CHUNK_NY; block[2] = CHUNK_NZ;
-    
+
     for(i=0; i<NX; i++) {
         /*
          * Select hyperslab for one chunk in the file
          */
         if((status = H5Sselect_hyperslab(dataspace, H5S_SELECT_SET, start, stride, count, block)) < 0)
             TEST_ERROR;
-        (start[0])++;        
+        (start[0])++;
 
         if((status = H5Dwrite(dataset, H5T_NATIVE_INT, mem_space, dataspace,
     		      H5P_DEFAULT, direct_buf[i])) < 0)
@@ -465,10 +465,10 @@ test_compressed_write(hid_t fapl_id)
     H5Sclose(mem_space);
     H5Pclose(dxpl);
     H5Fclose(file);
- 
-    /* Report the performance */ 
-    reportTime(timeval_start, (double)(NX*NY*NZ*sizeof(unsigned int)/MB));    
-   
+
+    /* Report the performance */
+    reportTime(timeval_start, (double)(NX*NY*NZ*sizeof(unsigned int)/MB));
+
     PASSED();
     return 0;
 
@@ -504,7 +504,7 @@ test_no_compress_write(hid_t fapl_id)
     hsize_t count[RANK];  /* Block count */
     hsize_t block[RANK];  /* Block sizes */
 
-    struct timeval timeval_start;    
+    struct timeval timeval_start;
 
     TESTING("H5Dwrite without compression");
 
@@ -531,14 +531,14 @@ test_no_compress_write(hid_t fapl_id)
     stride[0] = stride[1] = stride[2] = 1;
     count[0]  = count[1]  = count[2] = 1;
     block[0]  = CHUNK_NX; block[1]  = CHUNK_NY; block[2] = CHUNK_NZ;
-    
+
     for(i=0; i<NX; i++) {
         /*
          * Select hyperslab for one chunk in the file
          */
         if((status = H5Sselect_hyperslab(dataspace, H5S_SELECT_SET, start, stride, count, block)) < 0)
             TEST_ERROR;
-        (start[0])++;        
+        (start[0])++;
 
         if((status = H5Dwrite(dataset, H5T_NATIVE_INT, mem_space, dataspace,
     		      H5P_DEFAULT, direct_buf[i])) < 0)
@@ -553,10 +553,10 @@ test_no_compress_write(hid_t fapl_id)
     H5Sclose(mem_space);
     H5Pclose(dxpl);
     H5Fclose(file);
- 
-    /* Report the performance */ 
-    reportTime(timeval_start, (double)(NX*NY*NZ*sizeof(unsigned int)/MB));    
-   
+
+    /* Report the performance */
+    reportTime(timeval_start, (double)(NX*NY*NZ*sizeof(unsigned int)/MB));
+
     PASSED();
     return 0;
 
@@ -576,13 +576,13 @@ error:
  *  data to a Unix file
  *--------------------------------------------------
  */
-int 
+int
 test_unix_write(void)
 {
     int file, flag;
-    ssize_t op_size;    
+    ssize_t op_size;
     int i;
-    struct timeval timeval_start;    
+    struct timeval timeval_start;
 
     TESTING("Write compressed data to a Unix file");
 
@@ -595,8 +595,8 @@ test_unix_write(void)
     if ((file=open(FILENAME[1],flag))== -1)
         TEST_ERROR;
 
-    /* Write the compressed chunk data repeatedly to cover all the chunks in the 
-     * dataset, using the direct writing function.     */ 
+    /* Write the compressed chunk data repeatedly to cover all the chunks in the
+     * dataset, using the direct writing function.     */
     for(i=0; i<NX; i++) {
         op_size = write(file, outbuf[i],data_size[i]);
         if (op_size < 0)
@@ -617,14 +617,14 @@ test_unix_write(void)
         TEST_ERROR;
     }
 
-    /* Report the performance */ 
-    reportTime(timeval_start, (double)(total_size/MB));    
+    /* Report the performance */
+    reportTime(timeval_start, (double)(total_size/MB));
 
     PASSED();
     return 0;
 
 error:
-    return 1; 
+    return 1;
 }
 
 /*--------------------------------------------------
@@ -650,7 +650,7 @@ main (void)
         free(outbuf[i]);
         free(direct_buf[i]);
     }
- 
+
     return 0;
 }
 
diff --git a/tools/test/perform/overhead.c b/tools/test/perform/overhead.c
index 108d9e4..58558a5 100644
--- a/tools/test/perform/overhead.c
+++ b/tools/test/perform/overhead.c
@@ -217,9 +217,9 @@ test(fill_t fill_style, const double splits[],
         fspace, H5P_DEFAULT, dcpl, H5P_DEFAULT)) < 0) goto error;
     if ((fd=HDopen(FILE_NAME_1, O_RDONLY, 0666)) < 0) goto error;
 
-    if(FILL_RANDOM==fill_style) 
+    if(FILL_RANDOM==fill_style)
         had = (int *)calloc((size_t)cur_size[0], sizeof(int));
-    
+
     for (i=1; i<=cur_size[0]; i++) {
 
         /* Decide which chunk to write to */
@@ -391,7 +391,7 @@ main(int argc, char *argv[])
         nerrors += test(FILL_INWARD,  splits, FALSE, use_cache);
         nerrors += test(FILL_OUTWARD, splits, FALSE, use_cache);
         nerrors += test(FILL_RANDOM,  splits, FALSE, use_cache);
-    } 
+    }
     else {
         if (use_cache) usage(argv[0]);
         nerrors += test(fill_style,   splits, TRUE, FALSE);
diff --git a/tools/test/perform/pio_perf.c b/tools/test/perform/pio_perf.c
index 826e7a9..8146d84 100644
--- a/tools/test/perform/pio_perf.c
+++ b/tools/test/perform/pio_perf.c
@@ -80,7 +80,7 @@
 #define PIO_MPI             0x2
 #define PIO_HDF5            0x4
 
-#ifdef STANDALONE 
+#ifdef STANDALONE
 #define DBL_EPSILON 2.2204460492503131e-16
 #define H5_DBL_ABS_EQUAL(X,Y)       (fabs((X)-(Y)) < DBL_EPSILON)
 #endif
diff --git a/tools/test/perform/sio_engine.c b/tools/test/perform/sio_engine.c
index 9ea94cb..aa3a316 100644
--- a/tools/test/perform/sio_engine.c
+++ b/tools/test/perform/sio_engine.c
@@ -1321,7 +1321,7 @@ do_cleanupfile(iotype iot, char *filename)
             }
             H5Pclose(fapl);
             break;
-                            
+
         default:
             /* unknown request */
             HDfprintf(stderr, "Unknown IO type request (%d)\n", (int)iot);