Remove references to SVN.

1 files changed, 433 insertions, 119 deletions

diff --git a/bin/snapshot b/bin/snapshot
index a496edd..cc4bbc9 100755
--- a/bin/snapshot
+++ b/bin/snapshot
@@ -13,13 +13,14 @@
 # http://hdfgroup.org/HDF5/doc/Copyright.html.  If you do not have
 # access to either file, you may request a copy from help@hdfgroup.org.
 
-# This script should be run nightly from cron.  It checks out hdf5
+# This script should be run nightly from cron.  It checks out the source 
 # from the source repository and compares it against the previous
 # snapshot.  If anything significant changed then a new snapshot is
 # created, the minor version number is incremented, and the change is
 # checked back into the source repository.
 #
 
+
 # function definitions
 TIMESTAMP()
 {
@@ -28,7 +29,7 @@ TIMESTAMP()
 
 EXIT_BANNER()
 {
-TIMESTAMP "Exit $PROGNAME with status=$?"
+    TIMESTAMP "Exit $PROGNAME with status=$?"
 }
 
 # Show current total disk usage.
@@ -38,11 +39,178 @@ DISKUSAGE()
     ( read x y; echo "Disk Usage=$x KB" )
 }
 
+# function provided for testing software downloaded as tar files.  A version of
+# this function that properly extracts the downloaded files can be provided in 
+# the snapshots-${sw}-overrides file.
+EXTRACT()
+{
+   echo "Error:  ${SWVERSION} is in source repository - does not need extraction."
+}
+
+# Standard procedure for checking out or updating source code from an hdfgroup
+# git repository.  Override the function for other repositories or procedures.
+SOURCE_CHECKOUT()
+{
+   if test -n $GIT_URL; then
+      if [ -n "$AUTOGEN" ]; then
+         echo "Creating fresh clone of $GIT_URL in $BASEDIR/current_src"
+         # Check out the current version from source repository.
+         (cd $BASEDIR; rm -rf current_src
+          if test -z $GIT_BRANCH; then
+             echo "Testing empty branch $GIT_BRANCH." 
+             git clone $GIT_URL current_src
+          else
+             echo "Testing branch $GIT_BRANCH." 
+             git clone $GIT_URL -b $GIT_BRANCH current_src
+          fi
+          ) || exit 1
+      else
+         echo "Creating fresh clone of $GIT_URL in $BASEDIR/current"
+         # Check out the current version from source repository.
+         (cd $BASEDIR; rm -rf current
+          if test -n $GIT_BRANCH; then
+             git clone $GIT_URL -b $GIT_BRANCH current
+          else
+             git clone $GIT_URL current
+          fi ) || exit 1
+      fi
+   else
+      echo "Warning!  Source directory ("current") is not checked out from git."
+   fi
+}
+
+# Standard procedure for running the configure command in a build (test)
+# directory
+RUNCONFIGURE()
+{
+    if [ "${CURRENT}" != "${TESTDIR}" -a "$CPSRC" = "yes" ]; then
+        echo "Copying source files to ${TESTDIR}."
+        cp -pr ${CURRENT}/* ${TESTDIR}
+        cd ${TESTDIR}
+        ./${CONFIGURE}
+    elif [ -n "${AUTOGEN}" ]; then
+        ${CURRENTSRC}/${CONFIGURE}
+    else 
+        ${CURRENT}/${CONFIGURE} 
+    fi
+}
+
+# Sometimes "make distclean" doesn't adequately remove files from the previous
+# build.  If a build (test) directory was used, its contents can be entirely 
+# deleted to provide a clean start.  If the test is building in the source 
+# directory, the contents can't be deleted, so run "make distclean".
+DISTCLEAN()
+{
+    if [ "${srcdir}" = "yes" -a -n "${SRCDIRNAME}" -a -d ${BASEDIR}/TestDir/${SRCDIRNAME} ]; then
+        echo "Remove contents of $SRCDIRNAME.\n"
+        rm -rf ${BASEDIR}/TestDir/${SRCDIRNAME}/*
+    else
+       echo "$MAKE distclean"
+       (cd ${TESTDIR} && ${MAKE} distclean)
+    fi
+}
+
+# Several of the software packages tested do not support make check-install.
+# Those that support it should have a version of this function in their 
+# override with the following lines:
+#     TIMESTAMP "check-install $1" 
+#     ${MAKE} check-install $1
+CHECKINSTALL()
+{
+    echo "check-install is not supported for ${SWVERSION}"
+}
+
+# Function for hdf4 and hdf5 to override to check in changes after snapshot.
+# Safety measure to avoid unintended checkins to other repositories.
+COMMITSNAPSHOT()
+{
+    echo "original hdf5 script committed code changes back into git."
+}
+
+DISPLAYUSAGE()
+{
+    set -
+    cat <<EOF
+Usage: $PROGNAME [all] [checkout] [ftp <URL> [diff] [test] [srcdir] [release] [help]
+	[clean] [distclean] [echo] [deploy <dir>] [deploydir <dir>]
+	[zlib <zlib_path>] [releasedir <dir>] [srcdirname <dir>] [check-vfd]
+	[exec <command>] [module-load <module-list>] [op-configure <option>] 
+        [--<option>]
+    all:      Run all commands (checkout, test & release)
+              [Default is all]
+    checkout: Run source checkout
+    diff:     Run diff on current and previous versions.  Exit 0 if
+              no significant differences are found.  Otherwise, non-zero.
+    deploy:   deploy binary to directory <dir>
+    deploydir: use <dir> as the default directory for deployment
+    test:     Run test
+    release:  Run release
+    clean:    Run make clean
+    distclean:Run make distclean
+    echo:     Turn on echo mode (set -x)
+    setenv <name> <value>:
+              Set environment variable <name> to <value>.
+    setenvN <N> <name> <value> ...:
+	      Set environment variable with <N> values.
+	      E.g., setenvN 3 x a b c is same as setenv x="a b c".
+    srcdir:   Use srcdir option (does not imply other commands)
+              "snapshot srcdir" is equivalent to "snapshot srcdir all"
+              "snapshot srcdir checkout" is equivalent to "snapshot checkout"
+    srcdirname <dir>:
+              Use <dir> as the srcdir testing directory if srcdir is choosen.
+              If <dir> starts with '-', it is append to the default name
+              E.g., "snapshot srcdir srcdirname -xx" uses hostname-xx
+              [Default is hostname]
+    help:     Print this message
+    echo:     Turn on shell echo
+    zlib <zlib_path>:
+              Use <zlib_path> as the ZLIB locations
+              [Default is $ZLIB_default]
+    releasedir <dir>:
+              Use <dir> as the release directory
+              [Default is $ReleaseDir_default]
+    check-vfd:
+	      Run make check-vfd instead of just make check.
+    exttest <testscript>;
+              Run testscript;
+    exec <command>:
+              Run <command>;
+    module-load <module-list>:
+              Load modules in comma-separated <module-list>;
+    op-configure <option>:
+              Pass <option> to the configure command
+              E.g., "snapshot op-configure --enable-parallel"
+                  configures for parallel mode
+    --<option>:
+              Pass --<option> to the configure command
+              E.g., "snapshot --enable-parallel"
+                  configures for parallel mode
+EOF
+    exit $errcode
+}
 
 # MAIN
 # SGI /bin/sh replaces $0 as function name if used in a function.
 # Set the name here to avoid that ambiguity and better style too.
 PROGNAME=$0
+SNAPSHOTNAME=
+HDFREPOS=
+DOCVERSION=""
+MODULELIST=""
+
+if [ -f bin/snapshot_params ]; then
+   . bin/snapshot_params
+   echo "Added snapshot_params."
+fi
+if [ -z "$SWVER" -a -f bin/snapshot_version ]
+then
+   . bin/snapshot_version
+   echo "Added snapshot_version."
+fi
+if [ -n ${HDFREPOS} -a -f  bin/snapshot-${HDFREPOS}-overrides ]; then
+   . bin/snapshot-${HDFREPOS}-overrides
+   echo "Added snapshot-${HDFREPOS}-overrides."
+fi 
 
 echo "====================================="
 echo "$PROGNAME $*"
@@ -51,7 +219,7 @@ TIMESTAMP MAIN
 uname -a
 
 # setup exit banner message
-trap EXIT_BANNER 0
+trap EXIT_BANNER 0 1 2 9 15
 
 # Dump environment variables before option parsing
 echo ===Dumping environment variables before option parsing ===
@@ -67,8 +235,14 @@ ReleaseDir_default=release_dir
 ZLIB_default=
 ZLIB=$ZLIB_default
 
-# What compression methods to use? 
-METHODS="gzip zip bzip2 doc"
+# What compression methods to use? (md5 does checksum).  Doc was apparently 
+# added as a compression method to create a separate tarfile containing the
+# documentation files for v 1.8 and above.
+if [ "${SWVERSION}" = "hdf5_1_6" ]; then
+    METHODS="gzip bzip2 md5"
+else
+    METHODS="gzip bzip2 doc"
+fi
 
 # Use User's MAKE if set.  Else use generic make.
 MAKE=${MAKE:-make}
@@ -81,15 +255,38 @@ CHECKVAL=check
 cmd="all"
 test_opt=""
 errcode=0
+AUTOGEN=""
+EXTTEST=""
+EXEC_CMD_ARG=""
 while [ $# -gt 0 ] ; do
     case "$1" in
 	all)	
 	    cmd="all"
 	    ;;
+        checkout-autogen)
+            cmdcheckout="checkout"
+            AUTOGEN="autogen"
+            cmd=""
+            ;;
 	checkout)
 	    cmdcheckout="checkout"
 	    cmd=""
 	    ;;
+        ftp)
+            echo "Setting ftp flags in snapshot script"
+            cmdcheckout="checkout"
+            cmdftp="ftp"
+            cmd=""
+            shift
+	    if [ $# -lt 1 ]; then
+		echo "URL missing"
+		errcode=1
+		cmd="help"
+		break
+	    fi
+            ftp_url="$1"
+            echo "ftp_url is $ftp_url"
+            ;;
 	diff)
 	    cmddiff="diff"
 	    cmd=""
@@ -164,6 +361,10 @@ while [ $# -gt 0 ] ; do
 	    cmdrel="release"
 	    cmd=""
 	    ;;
+        autogen-release)
+            cmdrel="autogen-release"
+            cmd=""
+            ;;
 	clean | distclean)
 	    cmdclean="$1"
 	    cmd=""
@@ -196,12 +397,43 @@ while [ $# -gt 0 ] ; do
 	    fi
 	    ReleaseDir="$1"
 	    ;;
+        exttest)
+            shift
+	    if [ $# -lt 1 ]; then
+		echo "exttest script name missing"
+		errcode=1
+		cmd="help"
+		break
+	    fi
+	    cmd=""
+            EXTTEST="$1"
+            ;;
+        exec)
+            shift
+	    if [ $# -lt 1 ]; then
+		echo "exec command name missing"
+		errcode=1
+		cmd="help"
+		break
+	    fi
+	    cmd=""
+            EXEC_CMD_ARG="$@"
+	    # exit the parsing while loop since all arguments have been consummed.
+	    break
+            ;;
 	check-vfd)
 	    CHECKVAL=check-vfd
 	    ;;
-	yodconfigure)
-	    YODCONFIGURE=yes
-	    ;;
+        module-load)
+            shift
+            if [ $# -lt 1 ]; then
+                echo "missing module list to load"
+                errcode=1
+                cmd="help"
+                break
+            fi 
+            MODULELIST="$1"
+            ;;
 	--*)
 	    OP_CONFIGURE="$OP_CONFIGURE $1"
 	    ;;
@@ -225,87 +457,39 @@ while [ $# -gt 0 ] ; do
     shift
 done
 
+if [ -n "$MODULELIST" ]; then
+   . ~/.bashrc
+   module use /opt/pkgs/modules/all
+   # load module command will take a space separated list of modules.
+   # If we have a comma separated list, convert ',' to ' '.
+   MODULELIST="$( echo -e "$MODULELIST" | tr  ',' ' '  )"  
+   module load $MODULELIST
+fi
+
 # Dump environment variables after option parsing
 echo ===Dumping environment variables after option parsing ===
 printenv | sort
 echo ===Done Dumping environment variables after option parsing ===
 
 if [ "$cmd" = help ]; then
-    set -
-    cat <<EOF
-Usage: $PROGNAME [all] [checkout] [diff] [test] [srcdir] [release] [help]
-	[clean] [distclean] [echo] [deploy <dir>] [deploydir <dir>]
-	[zlib <zlib_path>] [releasedir <dir>] [srcdirname <dir>] [check-vfd]
-	[op-configure <option>] [--<option>]
-    all:      Run all commands (checkout, test & release)
-              [Default is all]
-    checkout: Run source checkout
-    diff:     Run diff on current and previous versions.  Exit 0 if
-              no significant differences are found.  Otherwise, non-zero.
-    deploy:   deploy binary to directory <dir>
-    deploydir: use <dir> as the default directory for deployment
-    test:     Run test
-    release:  Run release
-    clean:    Run make clean
-    distclean:Run make distclean
-    echo:     Turn on echo mode (set -x)
-    setenv <name> <value>:
-              Set environment variable <name> to <value>.
-    setenvN <N> <name> <value> ...:
-	      Set environment variable with <N> values.
-	      E.g., setenvN 3 x a b c is same as setenv x="a b c".
-    srcdir:   Use srcdir option (does not imply other commands)
-              "snapshot srcdir" is equivalent to "snapshot srcdir all"
-              "snapshot srcdir checkout" is equivalent to "snapshot checkout"
-    srcdirname <dir>:
-              Use <dir> as the srcdir testing directory if srcdir is choosen.
-              If <dir> starts with '-', it is append to the default name
-              E.g., "snapshot srcdir srcdirname -xx" uses hostname-xx
-              [Default is hostname]
-    help:     Print this message
-    echo:     Turn on shell echo
-    zlib <zlib_path>:
-              Use <zlib_path> as the ZLIB locations
-              [Default is $ZLIB_default]
-    releasedir <dir>:
-              Use <dir> as the release directory
-              [Default is $ReleaseDir_default]
-    check-vfd:
-	      Run make check-vfd instead of just make check.
-    op-configure <option>:
-              Pass <option> to the configure command
-              E.g., "snapshot op-configure --enable-parallel"
-                  configures for parallel mode
-    --<option>:
-              Pass --<option> to the configure command
-              E.g., "snapshot --enable-parallel"
-                  configures for parallel mode
-EOF
-    exit $errcode
+   DISPLAYUSAGE
 fi
 
 # Setup the proper configure option (--with-zlib) to use zlib library
 # provide ZLIB is non-empty.
 ZLIB=${ZLIB:+"--with-zlib="$ZLIB}
-if [ -n "$YODCONFIGURE" ]; then
-    cp configure configure.yod
-    bin/yodconfigure configure.yod
-    CONFIGURE="./configure.yod"
-else
-    CONFIGURE="./configure"
+# Adding --prefix as a configure option will put the path to the deploy 
+# directory in the initial libhdf5*.la files
+if [ -n "$DEPLOYDIRNAME" ]; then
+   OP_CONFIGURE="$OP_CONFIGURE --prefix=${deploydir}/${DEPLOYDIRNAME}"
 fi
-CONFIGURE="$CONFIGURE $ZLIB $OP_CONFIGURE"
+CONFIGURE="configure $OP_CONFIGURE"
+# echo "Configure command is $CONFIGURE"
 
 # Execute the requests
 snapshot=yes
 
-if [ -f bin/snapshot_version ]; then
-    . bin/snapshot_version
-else
-    H5VERSION=hdf5
-fi
-
-BASEDIR=${HOME}/snapshots-${H5VERSION}
+BASEDIR=${HOME}/snapshots-${SNAPSHOTNAME}
 if [ ! -d ${BASEDIR} ]; then
     echo "BASEDIR ($BASEDIR) does not exist"
     exit 1
@@ -315,11 +499,6 @@ CURRENT=${BASEDIR}/current
 PREVIOUS=${BASEDIR}/previous
 ReleaseDir=${ReleaseDir:=${BASEDIR}/${ReleaseDir_default}}
 HOSTNAME=`hostname | cut -f1 -d.`	# no domain part
-if [ $H5VERSION != hdf5 ]; then
-    SVNVERSION="hdf5/branches/$H5VERSION"
-else
-    SVNVERSION=hdf5/trunk		# use the default (trunk) version
-fi
 
 # Try finding a version of diff that supports the -I option too.
 DIFF=diff
@@ -333,19 +512,48 @@ done
 #=============================
 if [ "$cmd" = "all" -o -n "$cmdcheckout" ]; then
     TIMESTAMP "checkout"
-    # If there is a Makefile in ${CURRENT}, the last test done in it
-    # has not been distclean'ed.  They would interfere with other
-    # --srcdir build since make considers the files in ${CURRENT}
-    # take precedence over files in its own build-directory.  Run
-    # a "make distclean" to clean them all out.  This is not really
-    # part of the "checkout" functions but this is the most convenient
-    # spot to do the distclean.  We will also continue the checkout process
-    # regardless of the return code of distclean.
-    ( cd ${CURRENT}; test -f Makefile && ${MAKE} distclean)
-
-    SVNROOT=http://svn.hdfgroup.uiuc.edu
-    # Check out the current version from source repository.
-    (cd $BASEDIR; svn -q co ${SVNROOT}/${SVNVERSION} current ) || exit 1
+    # ${BASEDIR}/bin is now updated from git by EveningMaint or DailyMaint
+    # to avoid updating the scripts in ${BASEDIR}/bin while they are running.
+
+    if [ -z "$AUTOGEN" ]; then
+        # If there is a Makefile in ${CURRENT}, the last test done in it
+        # has not been distclean'ed.  They would interfere with other
+        # --srcdir build since make considers the files in ${CURRENT}
+        # take precedence over files in its own build-directory.  Run
+        # a "make distclean" to clean them all out.  This is not really
+        # part of the "checkout" functions but this is the most convenient
+        # spot to do the distclean.  We will also continue the checkout process
+        # regardless of the return code of distclean.
+        ( cd ${CURRENT}; test -f Makefile && ${MAKE} distclean)
+    fi
+    # echo "cmdftp is $cmdftp;  ftp_url is $ftp_url"
+    if [ -n "$cmdftp" ]; then
+        echo "Get the NetCDF4 source from their ftp server."
+        echo "Command executed is: 2>&1 wget -N $ftp_url" 
+        cd ${BASEDIR};
+        WGET_OUTPUT="`2>&1 wget -N $ftp_url`"
+        errcode=$?
+        if [[ $errcode -ne 0 ]]; then
+            exit $errcode
+        fi
+
+        if [ $? -ne 0 ];then
+            echo $0: "$WGET_OUTPUT" Exiting.
+            exit 1
+        fi
+
+        # echo "Wget output was $WGET_OUTPUT"
+
+        if echo "$WGET_OUTPUT" | fgrep 'not retrieving' &> /dev/null
+        then
+            echo "Snapshot unchanged"
+        else
+            echo "New snapshot downloaded"
+            EXTRACT
+        fi
+    else
+        SOURCE_CHECKOUT
+    fi
 fi # Do source checkout
 
 
@@ -353,7 +561,7 @@ fi # Do source checkout
 # Run Test the HDF5 library
 #=============================
 if [ "$cmd" = "all" -o -n "$cmdtest" -o -n "$cmddiff" ]; then
-    TIMESTAMP "diff"
+    TIMESTAMP "Run Tests"
     # setup if srcdir is used.
     if [ -z "$srcdir" ]; then
 	TESTDIR=${CURRENT}
@@ -369,10 +577,15 @@ if [ "$cmd" = "all" -o -n "$cmdtest" -o -n "$cmddiff" ]; then
 	esac
 	TESTDIR=${BASEDIR}/TestDir/${SRCDIRNAME}
 	test -d ${TESTDIR} || mkdir ${TESTDIR}
+        # set TESTDIR to use the direct path to the local test directory
+        # rather than the path through ${BASEDIR}.
+        cd ${TESTDIR}
+        TESTDIR=`pwd -P`
+        cd ${CURRENT}
     fi
     # Make sure current version exists and is clean
     if [ -d ${TESTDIR} ]; then
-	(cd ${TESTDIR} && ${MAKE} distclean)
+        DISTCLEAN    
     else
 	errcode=$?
         snapshot=no
@@ -382,12 +595,17 @@ if [ "$cmd" = "all" -o -n "$cmdtest" -o -n "$cmddiff" ]; then
     # Compare it with the previous version.  Compare only files listed in
     # the MANIFEST plus the MANIFEST itself.
     if [ -d ${PREVIOUS} ]; then
-	if (${DIFF} -c ${PREVIOUS}/MANIFEST ${CURRENT}/MANIFEST); then
+        if [ -z "${AUTOGEN}" ]; then
+            CURRENTSRC=${CURRENT}
+        else
+            CURRENTSRC=${BASEDIR}/current_src
+        fi
+	if (${DIFF} -c ${PREVIOUS}/MANIFEST ${CURRENTSRC}/MANIFEST); then
 	    snapshot=no
-	    for src in `grep '^\.' ${CURRENT}/MANIFEST|expand|cut -f1 -d' '`; do
+	    for src in `grep '^\.' ${CURRENTSRC}/MANIFEST|expand|cut -f1 -d' '`; do
 		if ${DIFF} -I H5_VERS_RELEASE -I " released on " \
 		    -I " currently under development" \
-		    ${PREVIOUS}/$src ${CURRENT}/$src
+		    ${PREVIOUS}/$src ${CURRENTSRC}/$src
 		then
 		    :	#continue
 		else
@@ -408,44 +626,123 @@ if [ "$cmd" = "all" -o -n "$cmdtest" -o -n "$cmddiff" ]; then
 	fi
     fi
 
+    #=============================
+    # Execute command if defined
+    #=============================
+    #echo BEFORE EXEC command
+    #echo EXEC_CMD_ARG=${EXEC_CMD_ARG}
+    
+    if [ -n "$EXEC_CMD_ARG" ]; then
+        TIMESTAMP ${EXEC_CMD_ARG}
+        TESTDIR=${BASEDIR}/TestDir/${SRCDIRNAME}
+        test -d ${TESTDIR} || mkdir ${TESTDIR}
+	if cd ${TESTDIR}; then
+	    # clean up the directory before executing the command
+	    # Do we need to clean first?
+	    # rm -rf *
+	    #
+	    # If EXEC_CMD_ARG starts with a '/', it has an absolute path, else it is
+	    # relative to the BASEDIR.
+	    case "$EXEC_CMD_ARG" in
+	    /*)
+                ${EXEC_CMD_ARG}
+		;;
+	    *)
+                ${BASEDIR}/${EXEC_CMD_ARG}
+		;;
+	    esac
+	    errcode=$?
+	else
+	    echo "${TESTDIR} not accessible"
+	    errcode=1
+	fi
+	# exit snapshot since nothing else to do, for now.
+        exit $errcode
+    fi
+
     # Build, run tests and install procedures
-    if [ "$snapshot" = "yes" ]; then
+    if [ "$snapshot" = "yes" ] && [ "$NOMAKE" != "yes" ]; then
+        FAIL_SECTION="" 
+        if [ -f ${TESTDIR}/failsection ]; then
+            rm ${TESTDIR}/failsection
+        fi
 	if (cd ${TESTDIR} && \
-	    TIMESTAMP "configure" && \
-	    ${srcdir:+${CURRENT}/}${CONFIGURE} && \
-	    TIMESTAMP "make" && \
+	    TIMESTAMP "configure" && echo "configure" > ${TESTDIR}/failsection && \
+	    RUNCONFIGURE && \
+            sleep 2 && \
+	    TIMESTAMP "make" && echo "make" > ${TESTDIR}/failsection && \
 	    ${MAKE} && DISKUSAGE \
-	    TIMESTAMP ${CHECKVAL} && \
+	    TIMESTAMP ${CHECKVAL} && echo "make check" > ${TESTDIR}/failsection &&  \
 	    ${MAKE} ${CHECKVAL} && DISKUSAGE \
-	    TIMESTAMP "install" && \
-	    ${MAKE} install-all && DISKUSAGE \
-	    TIMESTAMP "check-install" && \
-	    ${MAKE} check-install && DISKUSAGE \
-	    TIMESTAMP "uninstall" && \
-	    ${MAKE} uninstall-all && DISKUSAGE); then
+	    TIMESTAMP "install" && echo "make install" > ${TESTDIR}/failsection && \
+	    ${MAKE} install && DISKUSAGE \
+            TIMESTAMP "check-install" && echo "make check-install" > ${TESTDIR}/failsection && \
+	    CHECKINSTALL && DISKUSAGE \
+	    TIMESTAMP "uninstall" && echo "make uninstall" > ${TESTDIR}/failsection && \
+	    ${MAKE} uninstall && DISKUSAGE); then
 	    :
 	else
 	    errcode=$?
+            FAIL_SECTION=`cat ${TESTDIR}/failsection`
+            echo "Failed running ${FAIL_SECTION}"
 	    snapshot=no
 	    exit $errcode
 	fi
+    elif [ $CPSRC ]; then
+           cp -pr ${CURRENT}/* ${TESTDIR}
+    else 
+        cmdclean=""
     fi
 fi # Test the HDF5 library
 
+# Run external test if configured
 
 #=============================
+#=============================
+#if [ -d "$CURRENT" ]; then
+if [ "$EXTTEST" != "" ]; then
+    TIMESTAMP ${EXTTEST}
+    TESTDIR=${BASEDIR}/TestDir/${SRCDIRNAME}
+    test -d ${TESTDIR} || mkdir ${TESTDIR}
+    cd ${TESTDIR}
+    sleep 1
+    TIMESTAMP $pwd
+    ls
+    ${BASEDIR}/${EXTTEST}
+    errcode=$?
+    exit $errcode
+fi
+ 
+#=============================
 # Run deployment if requested.
 #=============================
 if [ -n "$DEPLOYDIRNAME" ]; then
+    # The daily tests deploy to .../hdf5/... or .../hdf4/... except on cobalt where the
+    # deploy directory is in .../HDF5/...  lc will take care of this.  If hdf4 or hdf5
+    # either upper or lower case isn't in the path, RELEASE.txt won't be found unless
+    # it is in $CURRENT. 
+    POS4=`perl -e "print index(lc(\"${deploydir}/${DEPLOYDIRNAME}\"), 'hdf4')"`
+    POS5=`perl -e "print index(lc(\"${deploydir}/${DEPLOYDIRNAME}\"), 'hdf5')"`
+    if [ "${POS4}" -ge "0" ]; then
+        RELEASE_TXT_LOC="release_notes"
+    elif [ "${POS5}" -ge "0" ]; then
+        RELEASE_TXT_LOC="release_docs"
+    else
+        RELEASE_TXT_LOC=""
+    fi
+ 
     if [ "$snapshot" = "yes" ]; then
 	TIMESTAMP "deploy"
         if (cd ${TESTDIR} &&
-            ${CURRENT}/bin/deploy ${deploydir}/${DEPLOYDIRNAME} && \
+            ${BASEDIR}/bin/deploy ${deploydir}/${DEPLOYDIRNAME} && \
             TIMESTAMP "clean" && \
             ${MAKE} clean && \
             TIMESTAMP "check-install prefix=${deploydir}/${DEPLOYDIRNAME}" && \
-            ${MAKE} check-install prefix=${deploydir}/${DEPLOYDIRNAME}); then
-	    :	#continue
+            CHECKINSTALL prefix=${deploydir}/${DEPLOYDIRNAME}); then
+                cd ${CURRENT}  
+                cp ${RELEASE_TXT_LOC}/RELEASE.txt ${deploydir}/${DEPLOYDIRNAME} 
+                cp COPYING ${deploydir}/${DEPLOYDIRNAME}
+	    #:	#continue
 	else
 	    errcode=$?
 	    exit $errcode
@@ -460,24 +757,41 @@ fi # Deploy
 if [ "$cmd" = "all" -o -n "$cmdrel" ]; then
     if [ "$snapshot" = "yes" ]; then
 	TIMESTAMP "release"
-	(cd ${CURRENT} && ${MAKE} distclean)
+        DISTCLEAN
 	(
 	    # Turn on exit on error in the sub-shell so that it does not
 	    # commit source if errors encounter here.
 	    set -e
-	    cd ${CURRENT}
-	    RELEASE_VERSION="`perl bin/h5vers -v`"
-	    echo "Making snapshot release ($RELEASE_VERSION) to ${ReleaseDir}..."
-	    bin/release -d $ReleaseDir $METHODS
-	    perl bin/h5vers -i
-	    svn -q commit -m "Snapshot $RELEASE_VERSION"
+            if [ "$cmdrel" = "autogen-release" ]; then
+                cd ${BASEDIR}/current_src
+            else
+	        cd ${CURRENT}
+            fi
+            if [ "$HDFREPOS" = "hdf4" ]; then
+	        RELEASE_VERSION="`perl bin/h4vers -v`"
+	        echo "Making snapshot release ($RELEASE_VERSION) to ${ReleaseDir}..."
+	        bin/release -d $ReleaseDir $METHODS
+	        perl bin/h4vers -i
+            elif [ "$HDFREPOS" = "hdf5" ]; then
+	        RELEASE_VERSION="`perl bin/h5vers -v`"
+	        echo "Making snapshot release ($RELEASE_VERSION) to ${ReleaseDir}..."
+                if [ "${DOCVERSION}" ]; then
+	            bin/release -d $ReleaseDir --docver ${DOCVERSION} $METHODS
+                else
+	            bin/release -d $ReleaseDir $METHODS
+                fi
+	        perl bin/h5vers -i
+            else
+                echo "need real release steps.  For now, only move current version to previous"
+            fi
+            COMMITSNAPSHOT
 	)
 	errcode=$?
     fi
 
     # Replace the previous version with the current version.
     # Should check if the errcode of the release process but there
-    # are other failures after release was done (e.g. h5vers or svn failures)
+    # are other failures after release was done (e.g. h5vers or git failures)
     # that should allow the replacement to occure.
     rm -rf ${PREVIOUS}
     mv ${CURRENT} ${PREVIOUS}
@@ -487,7 +801,7 @@ fi #Release snapshot
 #=============================
 # Clean the test area.  Default is no clean.
 #=============================
-if [ -n "$cmdclean" ]; then
+if [ -n "$cmdclean" ] && [ "$NOMAKE" != "yes" ]; then
     TIMESTAMP "clean"
     # setup if srcdir is used.
     if [ -z "$srcdir" ]; then