[svn-r7816] Purpose:

    Improvement

Description:
    If the library is built in parallel mode, then name the "h5cc" and
    "h5fc" programs "h5pcc" and "h5pfc" resp. This saves the user from
    worrying about mixing serial and parallel builds of the library and
    having to specify the pathnames and so-forth.

Platforms tested:
    Linux (w/ parallel & Fortran)
    Modi4 (w/ parallel & Fortran)
    Sol (Serial & Fortran & C++)

Misc. update:
    Updated release/docs/RELEASE

6 files changed, 217 insertions, 45 deletions

diff --git a/config/commence.in b/config/commence.in
index ad1ff45..4d6b0c7 100644
--- a/config/commence.in
+++ b/config/commence.in
@@ -35,6 +35,7 @@ CP=cp
 INSTALL=@INSTALL@
 INSTALL_PROGRAM=@INSTALL_PROGRAM@
 INSTALL_DATA=@INSTALL_DATA@
+PARALLEL=@PARALLEL@
 RUNSERIAL=@RUNSERIAL@
 RUNPARALLEL=@RUNPARALLEL@
 RUNTEST=$(RUNSERIAL)
diff --git a/config/conclude.in b/config/conclude.in
index 5ab9a1b..50f0de4 100644
--- a/config/conclude.in
+++ b/config/conclude.in
@@ -180,7 +180,17 @@ install: $(AUX_LIB) $(PUB_LIB) $(PUB_HDR) $(PUB_PROGS) $(libdir) $(includedir) $
 	done
 	@for f in X $(PUB_PROGS); do					      \
 	   if test $$f != X; then					      \
-	     ($(LT_INSTALL_PROG) $$f $(bindir)/. || exit 1);		      \
+	     if test "X$(PARALLEL)" != "Xno"; then                            \
+	       if test $$f = "h5cc"; then                     		      \
+	         ($(LT_INSTALL_PROG) $$f $(bindir)/h5pcc || exit 1);          \
+	       elif test $$f = "h5fc"; then                                   \
+	         ($(LT_INSTALL_PROG) $$f $(bindir)/h5pfc || exit 1);          \
+	       else							      \
+	         ($(LT_INSTALL_PROG) $$f $(bindir)/. || exit 1);	      \
+	       fi;							      \
+	     else                                                             \
+	       ($(LT_INSTALL_PROG) $$f $(bindir)/. || exit 1);		      \
+	     fi;							      \
 	   fi;							              \
 	done
 	@for d in X $(SUBDIRS); do                                            \
diff --git a/examples/Makefile.in b/examples/Makefile.in
index ad94970..f8ff2be 100644
--- a/examples/Makefile.in
+++ b/examples/Makefile.in
@@ -19,7 +19,8 @@ srcdir=@srcdir@
 @COMMENCE@
 
 ## Replace building CC with the just installed h5cc
-CC=$(bindir)/h5cc
+H5CC=$(bindir)/h5cc
+H5CC_PP=$(bindir)/h5pcc
 CPPFLAGS=-I. -I$(srcdir)
 CFLAGS=
 
@@ -27,7 +28,7 @@ CFLAGS=
 ## `make check' will run. List them in the order they should be run.
 TEST_PROGS_PARA=ph5example
 TEST_PROGS=h5_write h5_read h5_extend_write h5_chunk_read h5_compound   \
-	h5_group h5_select h5_attribute h5_mount h5_reference h5_drivers
+           h5_group h5_select h5_attribute h5_mount h5_reference h5_drivers
 
 ## These are the files that `make clean' (and derivatives) will remove from
 ## this directory.
@@ -38,8 +39,8 @@ CLEAN=*.h5 *.raw *.meta
 ## for building automatic dependencies.
 TEST_SRC_PARA=ph5example.c
 TEST_SRC=h5_chunk_read.c h5_compound.c h5_extend_write.c h5_group.c     \
-	 h5_read.c h5_write.c h5_select.c h5_attribute.c h5_mount.c     \
-	 h5_reference.c h5_drivers.c $(TEST_SRC_PARA)
+         h5_read.c h5_write.c h5_select.c h5_attribute.c h5_mount.c     \
+         h5_reference.c h5_drivers.c $(TEST_SRC_PARA)
 TEST_OBJ=$(TEST_SRC:.c=.lo)
 
 EXAMPLE_PROGS=$(TEST_SRC)
@@ -47,39 +48,111 @@ EXAMPLE_PROGS=$(TEST_SRC)
 ## How to build the programs... they all depend on the hdf5 library
 $(TEST_PROGS) $(TEST_PROGS_PARA): $(LIBHDF5)
 h5_chunk_read: $(srcdir)/h5_chunk_read.c
-	$(CC) $(CPPFLAGS) -o $@ $(srcdir)/h5_chunk_read.c
+	@if test "X$(PARALLEL)" = "Xno"; then				\
+	  echo $(H5CC) $(CPPFLAGS) -o $@ $<;				\
+	  $(H5CC) $(CPPFLAGS) -o $@ $<;					\
+	else								\
+	  echo $(H5CC_PP) $(CPPFLAGS) -o $@ $<;				\
+	  $(H5CC_PP) $(CPPFLAGS) -o $@ $<;				\
+	fi
 
 h5_compound: $(srcdir)/h5_compound.c
-	$(CC) $(CPPFLAGS) -o $@ $(srcdir)/h5_compound.c
+	@if test "X$(PARALLEL)" = "Xno"; then				\
+	  echo $(H5CC) $(CPPFLAGS) -o $@ $<;				\
+	  $(H5CC) $(CPPFLAGS) -o $@ $<;					\
+	else								\
+	  echo $(H5CC_PP) $(CPPFLAGS) -o $@ $<;				\
+	  $(H5CC_PP) $(CPPFLAGS) -o $@ $<;				\
+	fi
 
 h5_extend_write: $(srcdir)/h5_extend_write.c
-	$(CC) $(CPPFLAGS) -o $@ $(srcdir)/h5_extend_write.c
+	@if test "X$(PARALLEL)" = "Xno"; then				\
+	  echo $(H5CC) $(CPPFLAGS) -o $@ $<;				\
+	  $(H5CC) $(CPPFLAGS) -o $@ $<;					\
+	else								\
+	  echo $(H5CC_PP) $(CPPFLAGS) -o $@ $<;				\
+	  $(H5CC_PP) $(CPPFLAGS) -o $@ $<;				\
+	fi
 
 h5_group: $(srcdir)/h5_group.c
-	$(CC) $(CPPFLAGS) -o $@ $(srcdir)/h5_group.c
+	@if test "X$(PARALLEL)" = "Xno"; then				\
+	  echo $(H5CC) $(CPPFLAGS) -o $@ $<;				\
+	  $(H5CC) $(CPPFLAGS) -o $@ $<;					\
+	else								\
+	  echo $(H5CC_PP) $(CPPFLAGS) -o $@ $<;				\
+	  $(H5CC_PP) $(CPPFLAGS) -o $@ $<;				\
+	fi
 
 h5_write: $(srcdir)/h5_write.c
-	$(CC) $(CPPFLAGS) -o $@ $(srcdir)/h5_write.c
+	@if test "X$(PARALLEL)" = "Xno"; then				\
+	  echo $(H5CC) $(CPPFLAGS) -o $@ $<;				\
+	  $(H5CC) $(CPPFLAGS) -o $@ $<;					\
+	else								\
+	  echo $(H5CC_PP) $(CPPFLAGS) -o $@ $<;				\
+	  $(H5CC_PP) $(CPPFLAGS) -o $@ $<;				\
+	fi
 
 h5_read: $(srcdir)/h5_read.c
-	$(CC) $(CPPFLAGS) -o $@ $(srcdir)/h5_read.c
+	@if test "X$(PARALLEL)" = "Xno"; then				\
+	  echo $(H5CC) $(CPPFLAGS) -o $@ $<;				\
+	  $(H5CC) $(CPPFLAGS) -o $@ $<;					\
+	else								\
+	  echo $(H5CC_PP) $(CPPFLAGS) -o $@ $<;				\
+	  $(H5CC_PP) $(CPPFLAGS) -o $@ $<;				\
+	fi
 
 h5_select: $(srcdir)/h5_select.c
-	$(CC) $(CPPFLAGS) -o $@ $(srcdir)/h5_select.c
+	@if test "X$(PARALLEL)" = "Xno"; then				\
+	  echo $(H5CC) $(CPPFLAGS) -o $@ $<;				\
+	  $(H5CC) $(CPPFLAGS) -o $@ $<;					\
+	else								\
+	  echo $(H5CC_PP) $(CPPFLAGS) -o $@ $<;				\
+	  $(H5CC_PP) $(CPPFLAGS) -o $@ $<;				\
+	fi
 
 h5_attribute: $(srcdir)/h5_attribute.c
-	$(CC) $(CPPFLAGS) -o $@ $(srcdir)/h5_attribute.c
+	@if test "X$(PARALLEL)" = "Xno"; then				\
+	  echo $(H5CC) $(CPPFLAGS) -o $@ $<;				\
+	  $(H5CC) $(CPPFLAGS) -o $@ $<;					\
+	else								\
+	  echo $(H5CC_PP) $(CPPFLAGS) -o $@ $<;				\
+	  $(H5CC_PP) $(CPPFLAGS) -o $@ $<;				\
+	fi
 
 h5_mount: $(srcdir)/h5_mount.c
-	$(CC) $(CPPFLAGS) -o $@ $(srcdir)/h5_mount.c
+	@if test "X$(PARALLEL)" = "Xno"; then				\
+	  echo $(H5CC) $(CPPFLAGS) -o $@ $<;				\
+	  $(H5CC) $(CPPFLAGS) -o $@ $<;					\
+	else								\
+	  echo $(H5CC_PP) $(CPPFLAGS) -o $@ $<;				\
+	  $(H5CC_PP) $(CPPFLAGS) -o $@ $<;				\
+	fi
 
 h5_reference: $(srcdir)/h5_reference.c
-	$(CC) $(CPPFLAGS) -o $@ $(srcdir)/h5_reference.c
+	@if test "X$(PARALLEL)" = "Xno"; then				\
+	  echo $(H5CC) $(CPPFLAGS) -o $@ $<;				\
+	  $(H5CC) $(CPPFLAGS) -o $@ $<;					\
+	else								\
+	  echo $(H5CC_PP) $(CPPFLAGS) -o $@ $<;				\
+	  $(H5CC_PP) $(CPPFLAGS) -o $@ $<;				\
+	fi
 
 h5_drivers: $(srcdir)/h5_drivers.c
-	$(CC) $(CPPFLAGS) -o $@ $(srcdir)/h5_drivers.c
+	@if test "X$(PARALLEL)" = "Xno"; then				\
+	  echo $(H5CC) $(CPPFLAGS) -o $@ $<;				\
+	  $(H5CC) $(CPPFLAGS) -o $@ $<;					\
+	else								\
+	  echo $(H5CC_PP) $(CPPFLAGS) -o $@ $<;				\
+	  $(H5CC_PP) $(CPPFLAGS) -o $@ $<;				\
+	fi
 
 ph5example: $(srcdir)/ph5example.c
-	$(CC) $(CPPFLAGS) -o $@ $(srcdir)/$@.c
+	@if test "X$(PARALLEL)" = "Xno"; then				\
+	  echo $(H5CC) $(CPPFLAGS) -o $@ $<;				\
+	  $(H5CC) $(CPPFLAGS) -o $@ $<;					\
+	else								\
+	  echo $(H5CC_PP) $(CPPFLAGS) -o $@ $<;				\
+	  $(H5CC_PP) $(CPPFLAGS) -o $@ $<;				\
+	fi
 
 @CONCLUDE@
diff --git a/fortran/examples/Makefile.in b/fortran/examples/Makefile.in
index 745c15d..e074539 100644
--- a/fortran/examples/Makefile.in
+++ b/fortran/examples/Makefile.in
@@ -24,12 +24,13 @@ hdf5_builddir=$(top_builddir)/src
 
 ## Replace building FC with the just installed h5fc
 FC=$(bindir)/h5fc
+FC_PP=$(bindir)/h5pfc
 
 ## These are the programs that `make all' or `make tests' will build and which
 ## `make check' will run. List them in the order they should be run.
-TEST_PROGS=dsetexample fileexample rwdsetexample attrexample groupexample	\
-	   grpsexample grpdsetexample hyperslab selectele grpit refobjexample	\
-	   refregexample mountexample compound
+TEST_PROGS=dsetexample fileexample rwdsetexample attrexample groupexample       \
+           grpsexample grpdsetexample hyperslab selectele grpit refobjexample   \
+           refregexample mountexample compound
 
 ## These are the files that `make clean' (and derivatives) will remove from
 ## this directory.
@@ -38,10 +39,10 @@ CLEAN=*.h5
 ## List all source files here. The list of object files will be
 ## created by replacing the `.f90' with a `.o'. This list is necessary
 ## for building automatic dependencies.
-TEST_SRC=dsetexample.f90 fileexample.f90 rwdsetexample.f90 attrexample.f90	\
-	 groupexample.f90 grpsexample.f90 grpdsetexample.f90 hyperslab.f90	\
-	 selectele.f90 grpit.f90 refobjexample.f90 refregexample.f90		\
-	 mountexample.f90 compound.f90
+TEST_SRC=dsetexample.f90 fileexample.f90 rwdsetexample.f90 attrexample.f90      \
+         groupexample.f90 grpsexample.f90 grpdsetexample.f90 hyperslab.f90      \
+         selectele.f90 grpit.f90 refobjexample.f90 refregexample.f90            \
+         mountexample.f90 compound.f90
 TEST_OBJ=$(TEST_SRC:.f90=.lo)
 
 EXAMPLE_PROGS=$(TEST_SRC)
@@ -49,45 +50,129 @@ EXAMPLE_PROGS=$(TEST_SRC)
 ## How to build the programs... they all depend on the Fortran & C hdf5 libraries
 $(TEST_PROGS): $(LIBHDF5)
 dsetexample: $(srcdir)/dsetexample.f90
-	$(FC) -o $@ $(srcdir)/dsetexample.f90
+	@if test "X$(PARALLEL)" = "Xno"; then					\
+	  echo $(FC) -o $@ $<;							\
+	  $(FC) -o $@ $<;							\
+	else									\
+	  echo $(FC_PP) -o $@ $<;						\
+	  $(FC_PP) -o $@ $<;							\
+	fi
 
 fileexample: $(srcdir)/fileexample.f90
-	$(FC) -o $@ $(srcdir)/fileexample.f90
+	@if test "X$(PARALLEL)" = "Xno"; then					\
+	  echo $(FC) -o $@ $<;							\
+	  $(FC) -o $@ $<;							\
+	else									\
+	  echo $(FC_PP) -o $@ $<;						\
+	  $(FC_PP) -o $@ $<;							\
+	fi
 
 rwdsetexample: $(srcdir)/rwdsetexample.f90
-	$(FC) -o $@ $(srcdir)/rwdsetexample.f90
+	@if test "X$(PARALLEL)" = "Xno"; then					\
+	  echo $(FC) -o $@ $<;							\
+	  $(FC) -o $@ $<;							\
+	else									\
+	  echo $(FC_PP) -o $@ $<;						\
+	  $(FC_PP) -o $@ $<;							\
+	fi
 
 attrexample: $(srcdir)/attrexample.f90
-	$(FC) -o $@ $(srcdir)/attrexample.f90
+	@if test "X$(PARALLEL)" = "Xno"; then					\
+	  echo $(FC) -o $@ $<;							\
+	  $(FC) -o $@ $<;							\
+	else									\
+	  echo $(FC_PP) -o $@ $<;						\
+	  $(FC_PP) -o $@ $<;							\
+	fi
 
 groupexample: $(srcdir)/groupexample.f90
-	$(FC) -o $@ $(srcdir)/groupexample.f90
+	@if test "X$(PARALLEL)" = "Xno"; then					\
+	  echo $(FC) -o $@ $<;							\
+	  $(FC) -o $@ $<;							\
+	else									\
+	  echo $(FC_PP) -o $@ $<;						\
+	  $(FC_PP) -o $@ $<;							\
+	fi
 
 grpsexample: $(srcdir)/grpsexample.f90
-	$(FC) -o $@ $(srcdir)/grpsexample.f90
+	@if test "X$(PARALLEL)" = "Xno"; then					\
+	  echo $(FC) -o $@ $<;							\
+	  $(FC) -o $@ $<;							\
+	else									\
+	  echo $(FC_PP) -o $@ $<;						\
+	  $(FC_PP) -o $@ $<;							\
+	fi
 
 grpdsetexample: $(srcdir)/grpdsetexample.f90
-	$(FC) -o $@ $(srcdir)/grpdsetexample.f90
+	@if test "X$(PARALLEL)" = "Xno"; then					\
+	  echo $(FC) -o $@ $<;							\
+	  $(FC) -o $@ $<;							\
+	else									\
+	  echo $(FC_PP) -o $@ $<;						\
+	  $(FC_PP) -o $@ $<;							\
+	fi
 
 hyperslab: $(srcdir)/hyperslab.f90
-	$(FC) -o $@ $(srcdir)/hyperslab.f90
+	@if test "X$(PARALLEL)" = "Xno"; then					\
+	  echo $(FC) -o $@ $<;							\
+	  $(FC) -o $@ $<;							\
+	else									\
+	  echo $(FC_PP) -o $@ $<;						\
+	  $(FC_PP) -o $@ $<;							\
+	fi
 
 selectele: $(srcdir)/selectele.f90
-	$(FC) -o $@ $(srcdir)/selectele.f90
+	@if test "X$(PARALLEL)" = "Xno"; then					\
+	  echo $(FC) -o $@ $<;							\
+	  $(FC) -o $@ $<;							\
+	else									\
+	  echo $(FC_PP) -o $@ $<;						\
+	  $(FC_PP) -o $@ $<;							\
+	fi
 
 grpit: $(srcdir)/grpit.f90
-	$(FC) -o $@ $(srcdir)/grpit.f90
+	@if test "X$(PARALLEL)" = "Xno"; then					\
+	  echo $(FC) -o $@ $<;							\
+	  $(FC) -o $@ $<;							\
+	else									\
+	  echo $(FC_PP) -o $@ $<;						\
+	  $(FC_PP) -o $@ $<;							\
+	fi
 
 refobjexample: $(srcdir)/refobjexample.f90
-	$(FC) -o $@ $(srcdir)/refobjexample.f90
+	@if test "X$(PARALLEL)" = "Xno"; then					\
+	  echo $(FC) -o $@ $<;							\
+	  $(FC) -o $@ $<;							\
+	else									\
+	  echo $(FC_PP) -o $@ $<;						\
+	  $(FC_PP) -o $@ $<;							\
+	fi
 
 refregexample: $(srcdir)/refregexample.f90
-	$(FC) -o $@ $(srcdir)/refregexample.f90
+	@if test "X$(PARALLEL)" = "Xno"; then					\
+	  echo $(FC) -o $@ $<;							\
+	  $(FC) -o $@ $<;							\
+	else									\
+	  echo $(FC_PP) -o $@ $<;						\
+	  $(FC_PP) -o $@ $<;							\
+	fi
 
 mountexample: $(srcdir)/mountexample.f90
-	$(FC) -o $@ $(srcdir)/mountexample.f90
+	@if test "X$(PARALLEL)" = "Xno"; then					\
+	  echo $(FC) -o $@ $<;							\
+	  $(FC) -o $@ $<;							\
+	else									\
+	  echo $(FC_PP) -o $@ $<;						\
+	  $(FC_PP) -o $@ $<;							\
+	fi
 
 compound: $(srcdir)/compound.f90
-	$(FC) -o $@ $(srcdir)/compound.f90
+	@if test "X$(PARALLEL)" = "Xno"; then					\
+	  echo $(FC) -o $@ $<;							\
+	  $(FC) -o $@ $<;							\
+	else									\
+	  echo $(FC_PP) -o $@ $<;						\
+	  $(FC_PP) -o $@ $<;							\
+	fi
 
 @CONCLUDE@
diff --git a/release_docs/RELEASE.txt b/release_docs/RELEASE.txt
index 39746ca..6cc21c8 100644
--- a/release_docs/RELEASE.txt
+++ b/release_docs/RELEASE.txt
@@ -65,6 +65,9 @@ New Features
 
     Tools:
     ------
+        - Install the "h5cc" and "h5fc" tools as "h5pcc" and "h5pfc"
+            respectively if library is built in parallel mode.
+            WCW - 2003/11/04
         - Changed output of "OID"s from h5dump from "<number>-<number>" to
             "<number".  This affects both the "regular" and XML output.
             QAK - 2003/08/08
@@ -92,7 +95,7 @@ Bug Fixes since HDF5-1.6.0 release
             were not correctly handled, causing core dumps.  QAK - 2003/10/25
         - Fixed incorrect datatype of the third parameter to the Fortran90
             h5pset(get)_cache_f subroutine (INTEGER to INTEGER(SIZE_T)) 
-                                                          EIP - 2003/10/13
+            EIP - 2003/10/13
         - Fixed problems with accessing variable-length data datatypes on
             Crays.  QAK - 2003/10/10
         - Fixed potential file corruption bug when too many object header
@@ -169,11 +172,11 @@ Bug Fixes since HDF5-1.6.0 release
 
     Tools
     -----
-	- Fixed h5redeploy which sometimes complain too many argument for the
-	  test command. (The complain did not hinder the h5redploy to proceed
-	  correctly.) AKC - 2003/11/03
-	- Fixed a segmentation fault of h5diff when percentage option is used.
-	    AKC - 2003/08/27
+        - Fixed h5redeploy which sometimes complain too many argument for the
+            test command. (The complain did not hinder the h5redploy to
+            proceed correctly.) AKC - 2003/11/03
+        - Fixed a segmentation fault of h5diff when percentage option is used.
+            AKC - 2003/08/27
         - Switched away from tools using internal "fixtype" function(s) to use
             H5Tget_native_type() internally.  QAK - 2003/08/25
 
diff --git a/tools/misc/h5redeploy.in b/tools/misc/h5redeploy.in
index 75d5a68..3e6d192 100755
--- a/tools/misc/h5redeploy.in
+++ b/tools/misc/h5redeploy.in
@@ -66,7 +66,7 @@ ERROR()
 # Main
 #
 # Initialization
-h5tools="h5cc h5fc h5c++"	# possible hdf5 tools
+h5tools="h5cc h5pcc h5fc h5pfc h5c++"	# possible hdf5 tools
 foundtools=		# tools found and will be modified
 fmode=			# force mode, default is off
 prefix=`(cd ..;pwd)`