Change TestExpress #1722 (#1778)

8 files changed, 78 insertions, 27 deletions

diff --git a/CMakeLists.txt b/CMakeLists.txt
index cbb8163..037ec2f 100644
--- a/CMakeLists.txt
+++ b/CMakeLists.txt
@@ -790,8 +790,13 @@ if (BUILD_TESTING)
     H5_SET_VFD_LIST()
   endif ()
 
-  option (HDF_TEST_EXPRESS "Control testing framework (0-3)" "0")
+  set (H5_TEST_EXPRESS_LEVEL_DEFAULT "3")
+  set (HDF_TEST_EXPRESS "${H5_TEST_EXPRESS_LEVEL_DEFAULT}"
+      CACHE STRING "Control testing framework (0-3) (0 = exhaustive testing; 3 = quicker testing)")
   mark_as_advanced (HDF_TEST_EXPRESS)
+  if (NOT "${HDF_TEST_EXPRESS}" STREQUAL "")
+    set (H5_TEST_EXPRESS_LEVEL_DEFAULT "${HDF_TEST_EXPRESS}")
+  endif ()
 
   enable_testing ()
   include (CTest)
diff --git a/configure.ac b/configure.ac
index e971a37..867d436 100644
--- a/configure.ac
+++ b/configure.ac
@@ -255,9 +255,10 @@ AC_CACHE_CHECK([for cached host], [hdf5_cv_host], [hdf5_cv_host="none"]);
 if test $hdf5_cv_host = "none"; then
   hdf5_cv_host=$host
 elif test $hdf5_cv_host != $host; then
-  echo "The config.cache file was generated on $hdf5_cv_host but"
-  echo "this is $host.  Please remove that file and try again."
-  AC_MSG_ERROR([config.cache file is invalid])
+  AC_MSG_ERROR([
+     The config.cache file was generated on $hdf5_cv_host but
+     this is $host.  Please remove that file and try again.
+     config.cache file is invalid])
 fi
 
 ## ----------------------------------------------------------------------
@@ -414,7 +415,7 @@ if test "X$CC_BASENAME" = "Xclang"; then
   # 'address;undefined'.  Which and which combinations of these are
   #  supported varies by compiler version, but unsupported options
   # or combinations will result in configure errors reported in config.log.
-  # Comma separated lists of sanitize options wil be entered intact in
+  # Comma separated lists of sanitize options will be entered intact in
   # one -fsanitize=<list> flag.  Space separated lists will be entered in
   # separate -fsanitize=<item> flags.
   # NOTE: No sanity checking done here!
@@ -856,6 +857,32 @@ else
 fi
 
 ## ----------------------------------------------------------------------
+## Check what level of testing should be enabled
+##
+
+## Default is quickest testing
+TEST_EXPRESS_LEVEL_DEFAULT=3
+
+AC_MSG_CHECKING([if HDF5 testing intensity level is set])
+
+AC_ARG_ENABLE([test-express],
+              [AS_HELP_STRING([--enable-test-express],
+                              [Set HDF5 testing intensity level (0-3) [0 = exhaustive testing; 3 = quicker testing; default=3]])],
+              [TEST_EXPRESS_LEVEL_DEFAULT=$enableval])
+
+case "X-$TEST_EXPRESS_LEVEL_DEFAULT" in
+  X-0|X-1|X-2|X-3)
+    AC_MSG_RESULT([$TEST_EXPRESS_LEVEL_DEFAULT])
+    ;;
+  *)
+    AC_MSG_RESULT([error])
+    AC_MSG_ERROR([$TEST_EXPRESS_LEVEL_DEFAULT is not a valid test express level])
+    ;;
+esac
+
+AC_DEFINE_UNQUOTED([TEST_EXPRESS_LEVEL_DEFAULT], [$TEST_EXPRESS_LEVEL_DEFAULT], [HDF5 testing intensity level])
+
+## ----------------------------------------------------------------------
 ## Check if they would like to disable building tools
 ##
 
diff --git a/release_docs/INSTALL b/release_docs/INSTALL
index 9e2c5a7..c5cb6f8 100644
--- a/release_docs/INSTALL
+++ b/release_docs/INSTALL
@@ -502,7 +502,7 @@ CONTENTS
         The HDF5 tests can take a long time to run on some systems.  To perform
         a faster (but less thorough) test, set the HDF5TestExpress environment
         variable to 2 or 3 (with 3 being the shortest run).  To perform a
-        longer test, set HDF5TestExpress to 0.  1 is the default.
+        longer test, set HDF5TestExpress to 0.  3 is the default.
 
 4.6. Installing HDF5
         The HDF5 library, include files, and support programs can be
diff --git a/release_docs/INSTALL_CMake.txt b/release_docs/INSTALL_CMake.txt
index c93ed51..d51522f 100644
--- a/release_docs/INSTALL_CMake.txt
+++ b/release_docs/INSTALL_CMake.txt
@@ -769,7 +769,7 @@ HDF5_BUILD_FRAMEWORKS          "TRUE to build as frameworks libraries,
                                 FALSE to build according to BUILD_SHARED_LIBS"                FALSE
 HDF5_PACKAGE_EXTLIBS           "CPACK - include external libraries"                           OFF
 HDF5_STRICT_FORMAT_CHECKS      "Whether to perform strict file format checks"                 OFF
-HDF_TEST_EXPRESS               "Control testing framework (0-3)"                              "0"
+HDF_TEST_EXPRESS               "Control testing framework (0-3)"                              "3"
 HDF5_TEST_VFD                  "Execute tests with different VFDs"                            OFF
 DEFAULT_API_VERSION            "Enable default API (v16, v18)"                                "v18"
 HDF5_USE_FOLDERS               "Enable folder grouping of projects in IDEs."                  OFF
diff --git a/test/CMakeLists.txt b/test/CMakeLists.txt
index 3433d64..a2932de 100644
--- a/test/CMakeLists.txt
+++ b/test/CMakeLists.txt
@@ -29,6 +29,9 @@ if (NOT ONLY_SHARED_LIBS)
       INTERFACE "$<INSTALL_INTERFACE:$<INSTALL_PREFIX>/include>"
   )
   target_compile_options(${HDF5_TEST_LIB_TARGET} PRIVATE "${HDF5_CMAKE_C_FLAGS}")
+  target_compile_definitions(${HDF5_TEST_LIB_TARGET}
+      PRIVATE "H5_TEST_EXPRESS_LEVEL_DEFAULT=${H5_TEST_EXPRESS_LEVEL_DEFAULT}"
+  )
   TARGET_C_PROPERTIES (${HDF5_TEST_LIB_TARGET} STATIC)
   target_link_libraries (${HDF5_TEST_LIB_TARGET}
       PUBLIC ${LINK_LIBS} ${HDF5_LIB_TARGET}
@@ -48,7 +51,10 @@ if (BUILD_SHARED_LIBS)
       INTERFACE "$<INSTALL_INTERFACE:$<INSTALL_PREFIX>/include>"
   )
   target_compile_options(${HDF5_TEST_LIBSH_TARGET} PRIVATE "${HDF5_CMAKE_C_FLAGS}")
-  target_compile_definitions(${HDF5_TEST_LIBSH_TARGET} PUBLIC "H5_BUILT_AS_DYNAMIC_LIB")
+  target_compile_definitions(${HDF5_TEST_LIBSH_TARGET}
+      PUBLIC "H5_BUILT_AS_DYNAMIC_LIB"
+      PRIVATE "H5_TEST_EXPRESS_LEVEL_DEFAULT=${H5_TEST_EXPRESS_LEVEL_DEFAULT}"
+  )
   TARGET_C_PROPERTIES (${HDF5_TEST_LIBSH_TARGET} SHARED)
   target_link_libraries (${HDF5_TEST_LIBSH_TARGET}
       PUBLIC ${LINK_LIBS} ${HDF5_LIBSH_TARGET}
diff --git a/test/CMakeTests.cmake b/test/CMakeTests.cmake
index 21bd20d..fb8ff07 100644
--- a/test/CMakeTests.cmake
+++ b/test/CMakeTests.cmake
@@ -306,7 +306,7 @@ if (NOT CYGWIN)
   endif ()
   set_tests_properties (H5TEST-cache PROPERTIES
       FIXTURES_REQUIRED clear_cache
-      ENVIRONMENT "srcdir=${HDF5_TEST_BINARY_DIR}/H5TEST;HDF5TestExpress=${HDF_TEST_EXPRESS}"
+      ENVIRONMENT "srcdir=${HDF5_TEST_BINARY_DIR}/H5TEST"
       WORKING_DIRECTORY ${HDF5_TEST_BINARY_DIR}/H5TEST
   )
   set_tests_properties (H5TEST-cache PROPERTIES TIMEOUT ${CTEST_VERY_LONG_TIMEOUT})
@@ -343,7 +343,7 @@ else ()
 endif ()
 set_tests_properties (H5TEST-flush1 PROPERTIES
     FIXTURES_REQUIRED clear_flush
-    ENVIRONMENT "srcdir=${HDF5_TEST_BINARY_DIR}/H5TEST;HDF5TestExpress=${HDF_TEST_EXPRESS}"
+    ENVIRONMENT "srcdir=${HDF5_TEST_BINARY_DIR}/H5TEST"
     WORKING_DIRECTORY ${HDF5_TEST_BINARY_DIR}/H5TEST
 )
 if (HDF5_ENABLE_USING_MEMCHECKER)
diff --git a/test/CMakeVFDTests.cmake b/test/CMakeVFDTests.cmake
index 971abeb..166d2ae 100644
--- a/test/CMakeVFDTests.cmake
+++ b/test/CMakeVFDTests.cmake
@@ -128,7 +128,7 @@ add_custom_target(HDF5_VFDTEST_LIB_files ALL COMMENT "Copying files needed by HD
               -P "${HDF_RESOURCES_DIR}/vfdTest.cmake"
       )
       set_tests_properties (VFD-${vfdname}-${vfdtest} PROPERTIES
-          ENVIRONMENT "srcdir=${HDF5_TEST_BINARY_DIR}/${vfdname};HDF5TestExpress=${HDF_TEST_EXPRESS}"
+          ENVIRONMENT "srcdir=${HDF5_TEST_BINARY_DIR}/${vfdname}"
           WORKING_DIRECTORY ${HDF5_TEST_BINARY_DIR}/${vfdname}
       )
     endif ()
@@ -183,7 +183,7 @@ add_custom_target(HDF5_VFDTEST_LIB_files ALL COMMENT "Copying files needed by HD
       )
       set_tests_properties (VFD-${vfdname}-fheap PROPERTIES
           TIMEOUT ${CTEST_VERY_LONG_TIMEOUT}
-          ENVIRONMENT "srcdir=${HDF5_TEST_BINARY_DIR}/${vfdname};HDF5TestExpress=${HDF_TEST_EXPRESS}"
+          ENVIRONMENT "srcdir=${HDF5_TEST_BINARY_DIR}/${vfdname}"
           WORKING_DIRECTORY ${HDF5_TEST_BINARY_DIR}/${vfdname}
       )
     endif ()
diff --git a/test/testframe.c b/test/testframe.c
index 016f208..e7b0e1d 100644
--- a/test/testframe.c
+++ b/test/testframe.c
@@ -414,16 +414,20 @@ SetTestVerbosity(int newval)
  Values:
  0: Exhaustive run
     Tests should take as long as necessary
- 1: Full run.  Default if HDF5TestExpress is not defined
+ 1: Full run.  Default if H5_TEST_EXPRESS_LEVEL_DEFAULT
+    and HDF5TestExpress are not defined
     Tests should take no more than 30 minutes
  2: Quick run
     Tests should take no more than 10 minutes
- 3: Smoke test.  Default if HDF5TestExpress is set to a value other than 0-3
+ 3: Smoke test.
+    Default if HDF5TestExpress is set to a value other than 0-3
     Tests should take less than 1 minute
 
  Design:
  If the environment variable $HDF5TestExpress is defined,
- then test programs should skip some tests so that they
+ or if a default testing level > 1 has been set via
+ H5_TEST_EXPRESS_LEVEL_DEFAULT, then test programs should
+ skip some tests so that they
  complete sooner.
 
  Terms:
@@ -443,18 +447,27 @@ GetTestExpress(void)
 
     /* set it here for now.  Should be done in something like h5test_init(). */
     if (TestExpress == -1) {
-        env_val = getenv("HDF5TestExpress");
-
-        if (env_val == NULL)
-            SetTestExpress(1);
-        else if (strcmp(env_val, "0") == 0)
-            SetTestExpress(0);
-        else if (strcmp(env_val, "1") == 0)
-            SetTestExpress(1);
-        else if (strcmp(env_val, "2") == 0)
-            SetTestExpress(2);
-        else
-            SetTestExpress(3);
+        int express_val = 1;
+
+        /* Check if a default test express level is defined (e.g., by build system) */
+#ifdef H5_TEST_EXPRESS_LEVEL_DEFAULT
+        express_val = H5_TEST_EXPRESS_LEVEL_DEFAULT;
+#endif
+
+        /* Check if HDF5TestExpress is set to override the default level */
+        env_val = HDgetenv("HDF5TestExpress");
+        if (env_val) {
+            if (HDstrcmp(env_val, "0") == 0)
+                express_val = 0;
+            else if (HDstrcmp(env_val, "1") == 0)
+                express_val = 1;
+            else if (HDstrcmp(env_val, "2") == 0)
+                express_val = 2;
+            else
+                express_val = 3;
+        }
+
+        SetTestExpress(express_val);
     }
 
     return (TestExpress);