[svn-r21547] Updated svnprops on many files, mainly for EOL issues.

No testing since there are no code changes.

10 files changed, 263 insertions, 263 deletions

diff --git a/Makefile.am b/Makefile.am
index 640fdcb..640fdcb 100755..100644
--- a/Makefile.am
+++ b/Makefile.am
diff --git a/examples/run-c-ex.sh.in b/examples/run-c-ex.sh.in
index 8d0bdcd..8d0bdcd 100755..100644
--- a/examples/run-c-ex.sh.in
+++ b/examples/run-c-ex.sh.in
diff --git a/examples/testh5cc.sh.in b/examples/testh5cc.sh.in
index 6213a29..6213a29 100755..100644
--- a/examples/testh5cc.sh.in
+++ b/examples/testh5cc.sh.in
diff --git a/release_docs/CMake.txt b/release_docs/CMake.txt
index 29162df..29162df 100755..100644
--- a/release_docs/CMake.txt
+++ b/release_docs/CMake.txt
diff --git a/release_docs/COPYING b/release_docs/COPYING
index 6903daf..6903daf 100755..100644
--- a/release_docs/COPYING
+++ b/release_docs/COPYING
diff --git a/release_docs/INSTALL_MinGW.txt b/release_docs/INSTALL_MinGW.txt
index 3007099..85bf3e0 100644
--- a/release_docs/INSTALL_MinGW.txt
+++ b/release_docs/INSTALL_MinGW.txt
@@ -1,263 +1,263 @@
-************************************************************************

-         HDF5 Build and Install Instructions for MinGW

-************************************************************************

-

-NOTE:

-We are no longer actively supporting MinGW as of 1.8.5. 

-Below are the instructions from the 1.8.4 release.

-

-************************************************************************

-************************************************************************

-************************************************************************

-

-Preconditions:

---------------

-

-1. Installed MinGW (5.1.6 or higher) and MSYS (1.0.11 or higher)

-

-   To install the MinGW net release, go to http://www.mingw.org and 

-   follow the instructions for a manual installation.

-

-2. Compilers Installed

-

-   2.1 C/C++ Compilers HDF5-1.8.4 Supported

-

-       gcc-4.4.0 is included in MinGW, which includes: 

-       gcc    : GNU C compiler

-       gcc-g++: GNU C++ compiler

-       gfortran: GNU Fortran compiler

-

-   2.2 Using Compilers Not Supported

-       

-       The compilers in 2.1 are supported and tested by The HDF 

-       Group. Any other compilers may still work but they are not 

-       guaranteed by HDF group.

-

-       If users want to use other compilers except those in 2.1,

-       try to set the following variables to override the default 

-       choices.

-       

-       CC  : C compiler command

-       CXX : C++ compiler command

-       FC  : Fortran compiler command

-       

-3. HDF5 Dependencies

-

-   3.1 Zlib

-

-       zlib-1.2.2 or later is supported and tested on MinGW.

-

-   3.2 Szip

-       The HDF5 library has a predefined compression filter that uses

-       the extended-Rice lossless compression algorithm for chunked

-       datatsets. For more information about Szip compression and 

-       license terms see 

-       http://hdfgroup.org/HDF5/doc_resource/SZIP/index.html.

-      

-       Szip is currently not supported on MinGW, although we plan to add

-       support in the future.

-

-

-Build HDF5 on MinGW

-----------------------

-

-1. Get HDF5 source code package

-   Users can download HDF5 source code package from HDF website

-   (http://hdfgroup.org). 

-     

-2. Unpacking the distribution

-

-   The HDF5 source code is distributed in a variety of formats which

-   can be unpacked with the following commands, each of which creates 

-   an `hdf5-1.8.4' directory.

-

-   2.1 Non-compressed tar archive (*.tar)

-

-            $ tar xf hdf5-1.8.4.tar

-

-   2.2 Gzip'd tar archive (*.tar.gz)

-

-            $ gunzip < hdf5-1.8.4.tar.gz | tar xf -

-

-   2.3 Bzip'd tar archive (*.tar.bz2)

-

-            $ bunzip2 < hdf5-1.8.4.tar.bz2 | tar xf - 

-            

-3. Setup Environment

-

-   Building HDF5 1.8.4 requires an explicit link to libws2_32.a

-   to handle Windows Sockets.  To do this, issue the command:

-   

-            $ export LIBS=-lws2_32

-            

-   Also, the default search path can cause trouble using ./configure in HDF5

-   1.8.4.  Check that non-MinGW or non-msys directories are not added to the

-   PATH.  You can do this by:

-   

-            $ echo $PATH

-            

-   If there are spurious entries, specifically those related to other Windows

-   compilers or tools, remove them by setting a new PATH without them.  For

-   example,

-   

-            $ export PATH=.:/usr/local/bin:/mingw/bin:/bin

-

-            

-4. Remove Unsupported Source

-

-   There are some projects which are built by default to test performance on

-   POSIX systems.  They are irrelevent on MinGW, and can cause compiler errors.

-   

-   To remove these projects from the build script, open ./perform/Makefile.in

-   Find all instances of "h5perf_serial", and remove them (along with their

-   respective extension or targets, if they exist).  Then save the file.

-   

-   

-5. Remove Tests

-   

-   When building with MinGW, many tests must be removed from the

-   test suite run with "make check".  This is because of the way

-   MinGW and Windows handles certain parsing.  For example, MinGW

-   treats any command parameter starting with '/' as a path, and

-   replaces it with it's root directory on Windows, such as

-   'C:\msys\1.0\'.

-   

-   To remove the tests, open the given 'Makefile.in' and edit the

-   line begining with "TEST_SCRIPT = " to remove the test script.

-   For example, to remove the "testerror.sh" from ./test/Makefile.in:

-   

-        1) Open ./test/Makefile.in

-        

-        2) Find the line "TEST_SCRIPT = $(top_srcdir)/test/testerror.sh"

-        

-        3) Change it to simply read "TEST_SCRIPT =", and save.

-        

-   Do this for the following Makefiles and tests:

-   

-        - ./test/Makefile.in: "testerror.sh testlibinfo.sh testcheckinfo.sh"

-        

-        - ./tools/h5diff/Makefile.in: "testh5diff.sh"

-        

-        - ./tools/h5ls/Makefile.in: "testh5ls.sh"

-        

-        - ./tools/misc/Makefile.in: "testh5mkgrp.sh"

-        

-        - ./tools/h5copy/Makefile.in: "testh5copy.sh"

-        

-        - ./tools/h5stat/Makefile.in: "testh5stat.sh"

-        

-        - ./tools/h5dump/Makefile.in: "testh5dump.sh" and "testh5dumpxml.sh"

-        

-        

-6. Configuring 

-     

-   Notes: 

-       1) Note: MinGW is c++ package is missing the libstdc++.dll.a file

-          and c++ linking fails. Do not enable c++ option in configure.

-       

-       2) See detailed information in hdf5/release_docs/INSTALL, 

-          part 5. Full installation instructions for source 

-          distributions

-     

-   In short,

-     

-   To configure HDF5 with C Library, use 

-            

-            $ ./configure

-                   

-   If you would like to build the C++ library, add the parameter:

-

-            --enable-cxx (12-11-2009 MinGW C++ package is missing a file)

-                                                         

-   If you would like to build without the Zlib library, add the parameter:

-     

-           --without-zlib

-           

-   If you would like to specify the the Zlib library, there are two ways:

-     

-     Using

-

-           --with-zlib=INCDIR,LIBDIR

-

-       For example, if the zlib library is installed in

-       /usr, which is the parent directory of directories

-       "include" and "lib", 

-

-           --with-zlib=/usr/include,/usr/lib

-

-     Through the CPPFLAGS and LDFLAGS Variables

-           

-       For example, if zlib was installed in the directory 

-       /c/usr then using the following command to configure 

-       HDF5 with zib

-

-           $ export CPPFLAGS=-I/usr/include

-           $ export LDFLAGS=-L/usr/lib

-

-   If you would like to specify the install directory, add the parameter:

-

-            --prefix="path for installation"

-                 

-       By default, HDF5 library, header files, examples, and 

-       support programs will be installed in /usr/local/lib,

-       /usr/local/include, /usr/local/doc/hdf5/examples, and

-       /usr/local/bin. To use a path other than /usr/local specify 

-       the path with the `--prefix=PATH' switch as in the above

-       command.

-

-   Combination of Switches 

-

-       All of the above switches can be combined together. For 

-       example, if users want to configure HDF5 C/Fortran

-       library, with zlib library at /c/usr/, and 

-       install HDF5 into directory /c/hdf5 using 

-       gcc/gfortran as C/Fortran compiler:

-     

-           $ ./configure

-             --with-zlib=/usr/include,/usr/lib

-             --prefix=/c/hdf5

-             --enable-fortran

-             <"If no more switches, then hit Enter">

-

-       Notes: The command format above is for readilibity. In practice,

-              please type in the command above with at least one

-              space between each line, No "Enter" until users finish 

-              the switches and want to run the configure. 

-

- 

-     or do it through CPPFLAGS and LDFLAGS variables:

-     

-           $ CPPFLAGS=-I/usr/include \

-           $ LDFLAGS=-L/usr/lib \

-

-           $ ./configure

-             --prefix=/c/hdf5

-             --enable-fortran

-             <"If no more switches, then hit Enter">

-                          

-7. Make and Make Check

-

-   After configuration is done successfully, run the following series of

-   commands to build, test and install HDF5

-    

-            $ make          > "output file name"

-            $ make check    > "output file name"

-            

-   Before run "make install", check output file for "make check", there

-   should be no failures at all.

-

-8. Make Install

-

-            $ make install  > "output file name"

-   

-     

-9. Check installed HDF5 library

-

-   After step 8, go to your installation directory, there should be 

-   three subdirectories: "bin" "include" and "lib".

-

-            $ make installcheck  > "output file name"

-

------------------------------------------------------------------------

-

-Need Further assistance, email help@hdfgroup.org

+************************************************************************
+         HDF5 Build and Install Instructions for MinGW
+************************************************************************
+
+NOTE:
+We are no longer actively supporting MinGW as of 1.8.5. 
+Below are the instructions from the 1.8.4 release.
+
+************************************************************************
+************************************************************************
+************************************************************************
+
+Preconditions:
+--------------
+
+1. Installed MinGW (5.1.6 or higher) and MSYS (1.0.11 or higher)
+
+   To install the MinGW net release, go to http://www.mingw.org and 
+   follow the instructions for a manual installation.
+
+2. Compilers Installed
+
+   2.1 C/C++ Compilers HDF5-1.8.4 Supported
+
+       gcc-4.4.0 is included in MinGW, which includes: 
+       gcc    : GNU C compiler
+       gcc-g++: GNU C++ compiler
+       gfortran: GNU Fortran compiler
+
+   2.2 Using Compilers Not Supported
+       
+       The compilers in 2.1 are supported and tested by The HDF 
+       Group. Any other compilers may still work but they are not 
+       guaranteed by HDF group.
+
+       If users want to use other compilers except those in 2.1,
+       try to set the following variables to override the default 
+       choices.
+       
+       CC  : C compiler command
+       CXX : C++ compiler command
+       FC  : Fortran compiler command
+       
+3. HDF5 Dependencies
+
+   3.1 Zlib
+
+       zlib-1.2.2 or later is supported and tested on MinGW.
+
+   3.2 Szip
+       The HDF5 library has a predefined compression filter that uses
+       the extended-Rice lossless compression algorithm for chunked
+       datatsets. For more information about Szip compression and 
+       license terms see 
+       http://hdfgroup.org/HDF5/doc_resource/SZIP/index.html.
+      
+       Szip is currently not supported on MinGW, although we plan to add
+       support in the future.
+
+
+Build HDF5 on MinGW
+----------------------
+
+1. Get HDF5 source code package
+   Users can download HDF5 source code package from HDF website
+   (http://hdfgroup.org). 
+     
+2. Unpacking the distribution
+
+   The HDF5 source code is distributed in a variety of formats which
+   can be unpacked with the following commands, each of which creates 
+   an `hdf5-1.8.4' directory.
+
+   2.1 Non-compressed tar archive (*.tar)
+
+            $ tar xf hdf5-1.8.4.tar
+
+   2.2 Gzip'd tar archive (*.tar.gz)
+
+            $ gunzip < hdf5-1.8.4.tar.gz | tar xf -
+
+   2.3 Bzip'd tar archive (*.tar.bz2)
+
+            $ bunzip2 < hdf5-1.8.4.tar.bz2 | tar xf - 
+            
+3. Setup Environment
+
+   Building HDF5 1.8.4 requires an explicit link to libws2_32.a
+   to handle Windows Sockets.  To do this, issue the command:
+   
+            $ export LIBS=-lws2_32
+            
+   Also, the default search path can cause trouble using ./configure in HDF5
+   1.8.4.  Check that non-MinGW or non-msys directories are not added to the
+   PATH.  You can do this by:
+   
+            $ echo $PATH
+            
+   If there are spurious entries, specifically those related to other Windows
+   compilers or tools, remove them by setting a new PATH without them.  For
+   example,
+   
+            $ export PATH=.:/usr/local/bin:/mingw/bin:/bin
+
+            
+4. Remove Unsupported Source
+
+   There are some projects which are built by default to test performance on
+   POSIX systems.  They are irrelevent on MinGW, and can cause compiler errors.
+   
+   To remove these projects from the build script, open ./perform/Makefile.in
+   Find all instances of "h5perf_serial", and remove them (along with their
+   respective extension or targets, if they exist).  Then save the file.
+   
+   
+5. Remove Tests
+   
+   When building with MinGW, many tests must be removed from the
+   test suite run with "make check".  This is because of the way
+   MinGW and Windows handles certain parsing.  For example, MinGW
+   treats any command parameter starting with '/' as a path, and
+   replaces it with it's root directory on Windows, such as
+   'C:\msys\1.0\'.
+   
+   To remove the tests, open the given 'Makefile.in' and edit the
+   line begining with "TEST_SCRIPT = " to remove the test script.
+   For example, to remove the "testerror.sh" from ./test/Makefile.in:
+   
+        1) Open ./test/Makefile.in
+        
+        2) Find the line "TEST_SCRIPT = $(top_srcdir)/test/testerror.sh"
+        
+        3) Change it to simply read "TEST_SCRIPT =", and save.
+        
+   Do this for the following Makefiles and tests:
+   
+        - ./test/Makefile.in: "testerror.sh testlibinfo.sh testcheckinfo.sh"
+        
+        - ./tools/h5diff/Makefile.in: "testh5diff.sh"
+        
+        - ./tools/h5ls/Makefile.in: "testh5ls.sh"
+        
+        - ./tools/misc/Makefile.in: "testh5mkgrp.sh"
+        
+        - ./tools/h5copy/Makefile.in: "testh5copy.sh"
+        
+        - ./tools/h5stat/Makefile.in: "testh5stat.sh"
+        
+        - ./tools/h5dump/Makefile.in: "testh5dump.sh" and "testh5dumpxml.sh"
+        
+        
+6. Configuring 
+     
+   Notes: 
+       1) Note: MinGW is c++ package is missing the libstdc++.dll.a file
+          and c++ linking fails. Do not enable c++ option in configure.
+       
+       2) See detailed information in hdf5/release_docs/INSTALL, 
+          part 5. Full installation instructions for source 
+          distributions
+     
+   In short,
+     
+   To configure HDF5 with C Library, use 
+            
+            $ ./configure
+                   
+   If you would like to build the C++ library, add the parameter:
+
+            --enable-cxx (12-11-2009 MinGW C++ package is missing a file)
+                                                         
+   If you would like to build without the Zlib library, add the parameter:
+     
+           --without-zlib
+           
+   If you would like to specify the the Zlib library, there are two ways:
+     
+     Using
+
+           --with-zlib=INCDIR,LIBDIR
+
+       For example, if the zlib library is installed in
+       /usr, which is the parent directory of directories
+       "include" and "lib", 
+
+           --with-zlib=/usr/include,/usr/lib
+
+     Through the CPPFLAGS and LDFLAGS Variables
+           
+       For example, if zlib was installed in the directory 
+       /c/usr then using the following command to configure 
+       HDF5 with zib
+
+           $ export CPPFLAGS=-I/usr/include
+           $ export LDFLAGS=-L/usr/lib
+
+   If you would like to specify the install directory, add the parameter:
+
+            --prefix="path for installation"
+                 
+       By default, HDF5 library, header files, examples, and 
+       support programs will be installed in /usr/local/lib,
+       /usr/local/include, /usr/local/doc/hdf5/examples, and
+       /usr/local/bin. To use a path other than /usr/local specify 
+       the path with the `--prefix=PATH' switch as in the above
+       command.
+
+   Combination of Switches 
+
+       All of the above switches can be combined together. For 
+       example, if users want to configure HDF5 C/Fortran
+       library, with zlib library at /c/usr/, and 
+       install HDF5 into directory /c/hdf5 using 
+       gcc/gfortran as C/Fortran compiler:
+     
+           $ ./configure
+             --with-zlib=/usr/include,/usr/lib
+             --prefix=/c/hdf5
+             --enable-fortran
+             <"If no more switches, then hit Enter">
+
+       Notes: The command format above is for readilibity. In practice,
+              please type in the command above with at least one
+              space between each line, No "Enter" until users finish 
+              the switches and want to run the configure. 
+
+ 
+     or do it through CPPFLAGS and LDFLAGS variables:
+     
+           $ CPPFLAGS=-I/usr/include \
+           $ LDFLAGS=-L/usr/lib \
+
+           $ ./configure
+             --prefix=/c/hdf5
+             --enable-fortran
+             <"If no more switches, then hit Enter">
+                          
+7. Make and Make Check
+
+   After configuration is done successfully, run the following series of
+   commands to build, test and install HDF5
+    
+            $ make          > "output file name"
+            $ make check    > "output file name"
+            
+   Before run "make install", check output file for "make check", there
+   should be no failures at all.
+
+8. Make Install
+
+            $ make install  > "output file name"
+   
+     
+9. Check installed HDF5 library
+
+   After step 8, go to your installation directory, there should be 
+   three subdirectories: "bin" "include" and "lib".
+
+            $ make installcheck  > "output file name"
+
+-----------------------------------------------------------------------
+
+Need Further assistance, email help@hdfgroup.org
diff --git a/release_docs/INSTALL_Windows_From_Command_Line.txt b/release_docs/INSTALL_Windows_From_Command_Line.txt
index fc02d25..fc02d25 100755..100644
--- a/release_docs/INSTALL_Windows_From_Command_Line.txt
+++ b/release_docs/INSTALL_Windows_From_Command_Line.txt
diff --git a/release_docs/INSTALL_Windows_Short_NET.TXT b/release_docs/INSTALL_Windows_Short_NET.TXT
index db144d1..db144d1 100755..100644
--- a/release_docs/INSTALL_Windows_Short_NET.TXT
+++ b/release_docs/INSTALL_Windows_Short_NET.TXT
diff --git a/release_docs/INSTALL_Windows_Short_VS2005.TXT b/release_docs/INSTALL_Windows_Short_VS2005.TXT
index 9ed15b4..9ed15b4 100755..100644
--- a/release_docs/INSTALL_Windows_Short_VS2005.TXT
+++ b/release_docs/INSTALL_Windows_Short_VS2005.TXT
diff --git a/release_docs/INSTALL_Windows_Short_VS2008.TXT b/release_docs/INSTALL_Windows_Short_VS2008.TXT
index 4ec79ed..4ec79ed 100755..100644
--- a/release_docs/INSTALL_Windows_Short_VS2008.TXT
+++ b/release_docs/INSTALL_Windows_Short_VS2008.TXT