Run vim spellcheck on some files

7 files changed, 24 insertions, 22 deletions

diff --git a/Source/cmComputeLinkDepends.cxx b/Source/cmComputeLinkDepends.cxx
index 9a075bd..ddff2d9 100644
--- a/Source/cmComputeLinkDepends.cxx
+++ b/Source/cmComputeLinkDepends.cxx
@@ -27,7 +27,7 @@
 This file computes an ordered list of link items to use when linking a
 single target in one configuration.  Each link item is identified by
 the string naming it.  A graph of dependencies is created in which
-each node corresponds to one item and directed eges lead from nodes to
+each node corresponds to one item and directed edges lead from nodes to
 those which must *follow* them on the link line.  For example, the
 graph
 
@@ -42,7 +42,7 @@ search of the link dependencies starting from the main target.
 
 There are two types of items: those with known direct dependencies and
 those without known dependencies.  We will call the two types "known
-items" and "unknown items", respecitvely.  Known items are those whose
+items" and "unknown items", respectively.  Known items are those whose
 names correspond to targets (built or imported) and those for which an
 old-style <item>_LIB_DEPENDS variable is defined.  All other items are
 unknown and we must infer dependencies for them.  For items that look
@@ -150,7 +150,7 @@ times the component needs to be seen (once for trivial components,
 twice for non-trivial).  If at any time another component finishes and
 re-adds an already pending component, the pending component is reset
 so that it needs to be seen in its entirety again.  This ensures that
-all dependencies of a component are satisified no matter where it
+all dependencies of a component are satisfied no matter where it
 appears.
 
 After the original link line has been completed, we append to it the
diff --git a/Source/cmComputeTargetDepends.cxx b/Source/cmComputeTargetDepends.cxx
index 8e701c4..ab77c6b 100644
--- a/Source/cmComputeTargetDepends.cxx
+++ b/Source/cmComputeTargetDepends.cxx
@@ -31,7 +31,7 @@ dependencies for each target such that no cycles are left and the
 build order is safe.
 
 For most target types cyclic dependencies are not allowed.  However
-STATIC libraries may depend on each other in a cyclic fasion.  In
+STATIC libraries may depend on each other in a cyclic fashion.  In
 general the directed dependency graph forms a directed-acyclic-graph
 of strongly connected components.  All strongly connected components
 should consist of only STATIC_LIBRARY targets.
diff --git a/Source/cmCoreTryCompile.cxx b/Source/cmCoreTryCompile.cxx
index 7d84ba6..48f644b 100644
--- a/Source/cmCoreTryCompile.cxx
+++ b/Source/cmCoreTryCompile.cxx
@@ -153,11 +153,11 @@ int cmCoreTryCompile::TryCompileCode(std::vector<std::string> const& argv)
     std::string ccFile = this->BinaryDirectory + "/CMakeCache.txt";
     cmSystemTools::RemoveFile(ccFile.c_str());
 
-    // we need to create a directory and CMakeList file etc...
+    // we need to create a directory and CMakeLists file etc...
     // first create the directories
     sourceDirectory = this->BinaryDirectory.c_str();
 
-    // now create a CMakeList.txt file in that directory
+    // now create a CMakeLists.txt file in that directory
     FILE *fout = fopen(outFileName.c_str(),"w");
     if (!fout)
       {
diff --git a/Source/cmCreateTestSourceList.cxx b/Source/cmCreateTestSourceList.cxx
index 953328a..de20cb7 100644
--- a/Source/cmCreateTestSourceList.cxx
+++ b/Source/cmCreateTestSourceList.cxx
@@ -70,7 +70,7 @@ bool cmCreateTestSourceList
   if (cmSystemTools::GetFilenameExtension(*i).size() < 2)
     {
     this->SetError(
-      "You must specify a file extenion for the test driver file.");
+      "You must specify a file extension for the test driver file.");
     return false;
     }
   std::string driver = this->Makefile->GetCurrentOutputDirectory();
diff --git a/Source/cmDependsFortran.cxx b/Source/cmDependsFortran.cxx
index 9e4726c..c1b6090 100644
--- a/Source/cmDependsFortran.cxx
+++ b/Source/cmDependsFortran.cxx
@@ -30,7 +30,7 @@
 class cmDependsFortranSourceInfo
 {
 public:
-  // The name of the soruce file.
+  // The name of the source file.
   std::string Source;
 
   // Set of provided and required modules.
@@ -810,8 +810,8 @@ bool cmDependsFortran::ModulesDiffer(const char* modFile,
    *   -GNU
    *   -Intel
    *
-   * Eat the stream content until all recompile only realated changes
-   * are left bedind.
+   * Eat the stream content until all recompile only related changes
+   * are left behind.
    */
   if (strcmp(compilerId, "GNU") == 0 )
     {
@@ -852,7 +852,7 @@ bool cmDependsFortran::ModulesDiffer(const char* modFile,
       }
     }
 
-  // Compare the remainng content.  If no compiler id matched above,
+  // Compare the remaining content.  If no compiler id matched above,
   // including the case none was given, this will compare the whole
   // content.
   if(!cmDependsFortranStreamsDiffer(finModFile, finStampFile))
@@ -1209,7 +1209,7 @@ void cmDependsFortranParser_RuleElif(cmDependsFortranParser* parser)
    * cmDependsFortranParser_RuleIf(..)
    */
 
-  // Allways taken unless an #ifdef or #ifndef-branch has been taken
+  // Always taken unless an #ifdef or #ifndef-branch has been taken
   // already.  If the second condition isn't meet already
   // (parser->InPPFalseBranch == 0) correct it.
   if(!parser->SkipToEnd.empty() &&
@@ -1228,7 +1228,7 @@ void cmDependsFortranParser_RuleElse(cmDependsFortranParser* parser)
     return;
     }
 
-  // parser->InPPFalseBranch is either 0 or 1.  We change it denpending on
+  // parser->InPPFalseBranch is either 0 or 1.  We change it depending on
   // parser->SkipToEnd.top()
   if(!parser->SkipToEnd.empty() &&
      parser->SkipToEnd.top())
diff --git a/Source/cmake.cxx b/Source/cmake.cxx
index cce5080..0b7a996 100644
--- a/Source/cmake.cxx
+++ b/Source/cmake.cxx
@@ -131,7 +131,7 @@ void cmNeedBackwardsCompatibility(const std::string& variable,
       " that has not been defined. Some variables were always defined "
       "by CMake in versions prior to 1.6. To fix this you might need to set "
       "the cache value of CMAKE_BACKWARDS_COMPATIBILITY to 1.4 or less. If "
-      "you are writing a CMakeList file, (or have already set "
+      "you are writing a CMakeLists file, (or have already set "
       "CMAKE_BACKWARDS_COMPATABILITY to 1.4 or less) then you probably need "
       "to include a CMake module to test for the feature this variable "
       "defines.";
@@ -1433,7 +1433,7 @@ int cmake::ExecuteCMakeCommand(std::vector<std::string>& args)
     // Command to start progress for a build
     else if (args[1] == "cmake_progress_start" && args.size() == 4)
       {
-      // bascially remove the directory
+      // basically remove the directory
       std::string dirName = args[2];
       dirName += "/Progress";
       cmSystemTools::RemoveADirectory(dirName.c_str());
@@ -1930,7 +1930,7 @@ void cmake::SetGlobalGenerator(cmGlobalGenerator *gg)
     {
     delete this->GlobalGenerator;
     // restore the original environment variables CXX and CC
-    // Restor CC
+    // Restore CC
     std::string env = "CC=";
     if(this->CCEnvironment.size())
       {
@@ -2608,7 +2608,7 @@ int cmake::LoadCache()
   // could we not read the cache
   if (!this->CacheManager->LoadCache(this->GetHomeOutputDirectory()))
     {
-    // if it does exist, but isn;t readable then warn the user
+    // if it does exist, but isn't readable then warn the user
     std::string cacheFile = this->GetHomeOutputDirectory();
     cacheFile += "/CMakeCache.txt";
     if(cmSystemTools::FileExists(cacheFile.c_str()))
@@ -3369,19 +3369,21 @@ void cmake::DefineProperties(cmake *cm)
   cm->DefineProperty
     ("ENABLED_FEATURES", cmProperty::GLOBAL,
      "List of features which are enabled during the CMake run.",
-     "List of features which are enabled during the CMake run. Be default "
+     "List of features which are enabled during the CMake run. By default "
      "it contains the names of all packages which were found. This is "
      "determined using the <NAME>_FOUND variables. Packages which are "
      "searched QUIET are not listed. A project can add its own features to "
-     "this list.This property is used by the macros in FeatureSummary.cmake.");
+     "this list. "
+     "This property is used by the macros in FeatureSummary.cmake.");
   cm->DefineProperty
     ("DISABLED_FEATURES", cmProperty::GLOBAL,
      "List of features which are disabled during the CMake run.",
-     "List of features which are disabled during the CMake run. Be default "
+     "List of features which are disabled during the CMake run. By default "
      "it contains the names of all packages which were not found. This is "
      "determined using the <NAME>_FOUND variables. Packages which are "
      "searched QUIET are not listed. A project can add its own features to "
-     "this list.This property is used by the macros in FeatureSummary.cmake.");
+     "this list. "
+     "This property is used by the macros in FeatureSummary.cmake.");
   cm->DefineProperty
     ("PACKAGES_FOUND", cmProperty::GLOBAL,
      "List of packages which were found during the CMake run.",
diff --git a/Source/cmakexbuild.cxx b/Source/cmakexbuild.cxx
index 89d0ec5..8eaae47 100644
--- a/Source/cmakexbuild.cxx
+++ b/Source/cmakexbuild.cxx
@@ -15,7 +15,7 @@
 
 // This is a wrapper program for xcodebuild
 // it calls xcodebuild, and does two things
-// it removes much of the output, all the setevn
+// it removes much of the output, all the setenv
 // stuff.  Also, it checks for the text file busy
 // error, and re-runs xcodebuild until that error does
 // not show up.