Help: Organize and revise 3.17 release notes

Add section headers similar to the 3.16 release notes and move each
individual bullet into an appropriate section.  Revise a few bullets.

1 files changed, 218 insertions, 184 deletions

diff --git a/Help/release/3.17.rst b/Help/release/3.17.rst
index 9176181..30e6cc3 100644
--- a/Help/release/3.17.rst
+++ b/Help/release/3.17.rst
@@ -7,160 +7,160 @@ CMake 3.17 Release Notes
 
 Changes made since CMake 3.16 include the following.
 
-* The :command:`add_custom_command` command learned to detect paths in
-  ``DEPENDS`` arguments and convert them to paths relative to the current
-  binary directory. This only applies to paths which contain a ``/`` or ``\\``
-  in them because names like ``filename.txt`` could also be target names and
-  cannot be coverted into absolute paths blindly.
-
-* A :prop_tgt:`DEPRECATION` target property was added to mark
-  a target as deprecated. If a linked target is marked as
-  deprecated, a warning with the deprecation message is issued
-  at generate time.
+New Features
+============
 
-* The :prop_tgt:`AIX_EXPORT_ALL_SYMBOLS` target property and associated
-  :variable:`CMAKE_AIX_EXPORT_ALL_SYMBOLS` variable were created to
-  optionally explicitly disbale automatic export of symbols from shared
-  libraries on AIX.
+Generators
+----------
 
-* :prop_tgt:`AUTOMOC` and :prop_tgt:`AUTOUIC` learned to process headers with
-  a ``.hh`` extension.  The new behavior is enabled by policy
-  :policy:`CMP0100`.
+* :manual:`cmake(1)` gained a :generator:`Ninja Multi-Config` generator,
+  which is similar to the :generator:`Ninja` generator but can be used to build
+  multiple configurations at once.
 
-* :manual:`ccmake(1)` now displays cache values using colors
-  based on the entry type if the terminal supports color.
+* :ref:`Visual Studio Generators` learned to support per-config sources.
+  Previously only :ref:`Command-Line Build Tool Generators` supported them.
 
-* :manual:`ccmake(1)` now displays messages and a progress bar during
-  configure and generate.  It will keep the output displayed if any
-  errors or warnings occurred.
+* :ref:`Visual Studio Generators` for VS 2010 and above now support
+  specifying the ``VCTargetsPath`` value for project files in
+  :variable:`CMAKE_GENERATOR_TOOLSET` setting.
 
-* A :variable:`CMAKE_CTEST_ARGUMENTS` variable was added to specify a list
-  of command-line arguments passed to CTest when running through the
-  ``test`` (or ``RUN_TESTS``) target of the generated build system.
+* :ref:`Visual Studio Generators` for VS 2010 and above learned to
+  support .NET Standard and .NET Core.  See the
+  :prop_tgt:`DOTNET_TARGET_FRAMEWORK` target property and
+  associated :variable:`CMAKE_DOTNET_TARGET_FRAMEWORK` variable.
 
-* Define the following variables inside a function:
+Languages
+---------
 
-    - :variable:`CMAKE_CURRENT_FUNCTION`
-    - :variable:`CMAKE_CURRENT_FUNCTION_LIST_DIR`
-    - :variable:`CMAKE_CURRENT_FUNCTION_LIST_FILE`
-    - :variable:`CMAKE_CURRENT_FUNCTION_LIST_LINE`
+* The :manual:`Compile Features <cmake-compile-features(7)>` functionality
+  now offers meta-features for the CUDA language standard levels
+  (e.g. ``cuda_std_03``, ``cuda_std_14``).  See
+  :prop_gbl:`CMAKE_CUDA_KNOWN_FEATURES`.
 
-* :manual:`cmake(1)` gained a ``--debug-find`` command line
-  option that can be used to provide information on where find
-  commands searched.
+Compilers
+---------
 
-* Variable :variable:`CMAKE_FIND_DEBUG_MODE` was introduced to
-  print extra find call information during the cmake run to standard
-  error. Output is designed for human consumption and not for parsing.
+* The IBM XL Fortran compiler is now supported by the :generator:`Ninja`
+  generator.
 
-* :manual:`cmake(1)` gained a ``rm`` command line
-  option that can be used to remove directories (with ``-r`` or ``-R`` flag)
-  and files.
-  If the ``-f`` flag is not specified, attempting to remove a file that
-  doesn't exist returns an non-zero error code.
-  This command deprecates ``remove`` and ``remove_directory``.
-  The ``remove`` implementation was buggy and always returned 0 when ``force``
-  flag was not present and a file didn't exist. It cannot be fixed without
-  breaking backwards compatibility so we introduced ``rm``.
+Command-Line
+------------
 
-* The :envvar:`CMAKE_<LANG>_COMPILER_LAUNCHER` environment variable may now be
-  used to initialize the :variable:`CMAKE_<LANG>_COMPILER_LAUNCHER` variable.
+* :manual:`cmake(1)` gained a ``--debug-find`` command-line option to
+  enable additional human-readable output on where find commands search.
 
-* The :cpack_gen:`CPack PackageMaker Generator` generator has been
-  deprecated because Xcode no longer distributes the PackageMaker tools.
-  The undocumented ``OSXX11`` generator has also been deprecated.
+* :manual:`cmake(1)` gained a ``--trace-format`` command-line option that
+  can be used to set the ``--trace`` output format. Currently, the old
+  human readable and the new JSON format are supported. The new JSON format
+  is easier to parse automatically, than the existing format.
 
-* The :cpack_gen:`CPack DragNDrop Generator` learned to handle
-  RTF formatted license files.  When :variable:`CPACK_DMG_SLA_DIR`
-  variable is set, <language>.license.rtf is considered, but
-  only as a fallback when the plaintext (.txt) file is not found
-  in order to maintain backwards compatibility.
+* :manual:`cmake(1)` gained a ``-E rm`` command-line tool that can be
+  used to remove directories and files.  This supersedes the existing
+  ``-E remove`` and ``-E remove_directory`` tools and has better semantics.
 
-* The :cpack_gen:`CPack NSIS Generator` gained a new variable
-  :variable:`CPACK_NSIS_MUI_HEADERIMAGE` to set the header image.
-  To not break existing setups, it still defaults to
-  :variable:`CPACK_PACKAGE_ICON` if the new variable is not set.
+Commands
+--------
 
-* The :cpack_gen:`CPack NSIS Generator` now supports
-  :variable:`CPACK_NSIS_UNINSTALL_NAME`.
-  This can be used to specify the name of the Uninstall program.
+* The :command:`add_custom_command` command learned to interpret paths in
+  ``DEPENDS`` arguments that are specified relative to the current
+  binary directory.
 
-* The :cpack_gen:`CPack NSIS Generator` now supports
-  :variable:`CPACK_NSIS_WELCOME_TITLE` and :variable:`CPACK_NSIS_WELCOME_TITLE_3LINES`.
-  These can be used to specify the welcome page title and display it in 3 lines.
+* The :command:`foreach` learned a new option ``ZIP_LISTS`` to iterate
+  over multiple lists simultaneously.
 
-* The :cpack_gen:`CPack NSIS Generator` now supports
-  :variable:`CPACK_NSIS_FINISH_TITLE` and :variable:`CPACK_NSIS_FINISH_TITLE_3LINES`.
-  These can be used to specify the finish page title and display it in 3 lines.
+* The :command:`load_cache(READ_WITH_PREFIX)` command mode is now allowed
+  when using ``cmake -P`` to :ref:`Run a Script <Script Processing Mode>`.
 
-* The :cpack_gen:`CPack productbuild Generator` and
-  :cpack_gen:`CPack PackageMaker Generator` gained options
-  :variable:`CPACK_PRODUCTBUILD_BACKGROUND` and
-  :variable:`CPACK_PACKAGEMAKER_BACKGROUND`, respectively,
-  to specify a background image for the macOS installer.
+* The :command:`message` command learned to output context provided in
+  the :variable:`CMAKE_MESSAGE_CONTEXT` variable for log levels
+  ``NOTICE`` and below.  Enable this output with the new ``--log-context``
+  command-line option or :variable:`CMAKE_MESSAGE_CONTEXT_SHOW` variable.
 
-* The :variable:`CTEST_CONFIGURATION_TYPE` variable is now set from the command
-  line when :manual:`ctest(1)` is invoked with ``-C <cfg>``.
+* The :command:`message` command gained new keywords ``CHECK_START``,
+  ``CHECK_PASS`` and ``CHECK_FAIL``.
 
-* The :manual:`ctest(1)` gained support for Dr. Memory to run
-  memcheck runs.
+* :command:`target_compile_options` command now honors the ``BEFORE``
+  keyword more consistently.  See policy :policy:`CMP0101`.
 
-* The :manual:`ctest(1)` tool gained a ``--no-tests=<[error|ignore]>`` option
-  to explicitly set and unify the behavior between direct invocation and
-  script mode if no tests were found.
+Variables
+---------
 
-* The :manual:`ctest(1)` tool gained a ``--repeat <mode>:<n>`` option
-  to specify conditions in which to repeat tests.  This generalizes
-  the existing ``--repeat-until-fail <n>`` option to add modes for
-  ``until-pass`` and ``after-timeout``.
+* A :variable:`CMAKE_CTEST_ARGUMENTS` variable was added to specify a list
+  of command-line arguments passed to CTest when running through the
+  ``test`` (or ``RUN_TESTS``) target of the generated build system.
 
-* The :command:`ctest_test` command gained a ``REPEAT <mode>:<n>`` option
-  to specify conditions in which to repeat tests.
+* The following variables are now defined inside a :command:`function`:
 
-* The :manual:`Compile Features <cmake-compile-features(7)>` functionality
-  now offers meta-features for the CUDA language standard levels
-  (e.g. ``cuda_std_03``, ``cuda_std_14``).  See
-  :prop_gbl:`CMAKE_CUDA_KNOWN_FEATURES`.
+  - :variable:`CMAKE_CURRENT_FUNCTION`
+  - :variable:`CMAKE_CURRENT_FUNCTION_LIST_DIR`
+  - :variable:`CMAKE_CURRENT_FUNCTION_LIST_FILE`
+  - :variable:`CMAKE_CURRENT_FUNCTION_LIST_LINE`
 
 * The :variable:`CMAKE_CUDA_RUNTIME_LIBRARY` variable and
   :prop_tgt:`CUDA_RUNTIME_LIBRARY` target property were introduced to
   select the CUDA runtime library used when linking targets that
   use CUDA.
 
-* The :cpack_gen:`CPack DragNDrop Generator` learned to use
-  the :variable:`CPACK_DMG_<component>_FILE_NAME` variable
-  to set a custom filename when packaging components into
-  their own DMGs.
-
-* An explicit deprecation diagnostic was added for policy ``CMP0068``
-  and policy ``CMP0069`` (``CMP0067`` and below were already deprecated).
-  The :manual:`cmake-policies(7)` manual explains that the OLD behaviors
-  of all policies are deprecated and that projects should port to the
-  NEW behaviors.
+* The :variable:`CMAKE_FIND_DEBUG_MODE` variable was introduced to
+  print extra find call information during the cmake run to standard
+  error. Output is designed for human consumption and not for parsing.
 
 * The :variable:`CMAKE_EXPORT_COMPILE_COMMANDS` variable now takes its
   initial value from the :envvar:`CMAKE_EXPORT_COMPILE_COMMANDS` environment
   variable if no explicit configuration is given.
 
-* The :module:`ExternalProject` module :command:`ExternalProject_Add`
-  command gained a ``GIT_SUBMODULES_RECURSE`` option to specify whether
-  Git submodules should be updated recursively.  The default is on to
-  preserve existing behavior.
+* The :variable:`CMAKE_<LANG>_COMPILER_LAUNCHER` variable, if not set
+  explicitly, now takes its initial value from the
+  :envvar:`CMAKE_<LANG>_COMPILER_LAUNCHER` environment variable.
 
 * The :variable:`CMAKE_MESSAGE_LOG_LEVEL` variable can now be used
   to persist a log level between CMake runs, unlike the ``--log-level``
   command line option which only applies to that particular run.
 
-* The :command:`message` command learned to output context provided in
-  the :variable:`CMAKE_MESSAGE_CONTEXT` variable for log levels
-  ``NOTICE`` and below.  Enable this output with the new ``--log-context``
-  command-line option or :variable:`CMAKE_MESSAGE_CONTEXT_SHOW` variable.
+* The :variable:`CMAKE_XCODE_SCHEME_ENVIRONMENT` variable and
+  :prop_tgt:`XCODE_SCHEME_ENVIRONMENT` target property were added to
+  tell the :generator:`Xcode` generator to set the value of the
+  ``Custom Working Directory`` schema option.
 
-* The :manual:`file API <cmake-file-api(7)>` index file now emits a
-  ``multiConfig`` flag specifying whether or not the generator supports
-  multiple output configurations.
+Properties
+----------
+
+* The :prop_tgt:`AIX_EXPORT_ALL_SYMBOLS` target property and associated
+  :variable:`CMAKE_AIX_EXPORT_ALL_SYMBOLS` variable were created to
+  optionally explicitly disbale automatic export of symbols from shared
+  libraries on AIX.
+
+* The :prop_tgt:`DEPRECATION` target property was added to mark
+  a target as deprecated.  If a linked target is marked as
+  deprecated, a warning with the deprecation message is issued
+  at generate time.
+
+* The :prop_tgt:`INSTALL_NAME_DIR` target property now supports
+  :manual:`generator expressions <cmake-generator-expressions(7)>`.
+  In particular, the ``$<INSTALL_PREFIX>`` generator expression can
+  be used to set the directory relative to the install-time prefix.
+
+* Target properties :prop_tgt:`OSX_COMPATIBILITY_VERSION` and
+  :prop_tgt:`OSX_CURRENT_VERSION` were added to set the
+  ``compatibility_version`` and ``curent_version`` respectively
+  on macOS. For backwards compatibility, if these properties
+  are not set, :prop_tgt:`SOVERSION` and :prop_tgt:`VERSION`
+  are used respectively as fallbacks.
+
+* The :prop_tgt:`VS_DOTNET_DOCUMENTATION_FILE` target property was added
+  to tell :ref:`Visual Studio Generators` to generate a ``DocumentationFile``
+  reference in ``.csproj`` files.
+
+Modules
+-------
+
+* The :module:`ExternalProject` module :command:`ExternalProject_Add`
+  command gained a ``GIT_SUBMODULES_RECURSE`` option to specify whether
+  Git submodules should be updated recursively.  The default is on to
+  preserve existing behavior.
 
-* The :module:`FindCUDAToolkit` module was added to find the CUDA Toolkit without enabling CUDA as a language.
+* The :module:`FindCUDAToolkit` module was added to find the
+  CUDA Toolkit without enabling CUDA as a language.
 
 * The :module:`FindCURL` module learned to find CURL using
   the ``CURLConfig.cmake`` package configuration file generated by
@@ -171,41 +171,125 @@ Changes made since CMake 3.16 include the following.
   with :variable:`CMAKE_CURRENT_BINARY_DIR` as the working directory.
   See policy :policy:`CMP0098`.
 
-* The :module:`FindLibArchive` module now returns an ``IMPORTED`` target
+* The :module:`FindLibArchive` module now provides an imported target
   for libarchive.
 
-* The :module:`FindPython` module has learned to find Python components in active
-  virtual environments managed by ``conda``.
+* The :module:`FindPython` module has learned to find Python components
+  in active virtual environments managed by ``conda``.
 
 * The :module:`FindPython3` and :module:`FindPython` modules gained,
   respectively, variable ``Python3_SOABI`` and ``Python_SOABI`` giving
   the standard extension suffix for modules.
 
-* The :command:`foreach` learned a new option ``ZIP_LISTS`` to iterate
-  over multiple lists simultaneously.
+* The :module:`FindLibXml2` module now provides an imported target for the
+  ``xmllint`` executable
 
-* The :module:`FindPackageHandleStandardArgs` module learned to check the
-  package name passed in for typo mistakes.
+Autogen
+-------
 
-* The :prop_tgt:`INSTALL_NAME_DIR` target property now supports
-  :manual:`generator expressions <cmake-generator-expressions(7)>`.
-  In particular, the ``$<INSTALL_PREFIX>`` generator expression can
-  be used to set the directory relative to the install-time prefix.
+* :prop_tgt:`AUTOMOC` and :prop_tgt:`AUTOUIC` learned to process headers
+  with a ``.hh`` extension.  See policy :policy:`CMP0100`.
 
-* :manual:`cmake(1)` gained a ``--trace-format`` command line option that
-  can be used to set the ``--trace`` output format. Currently, the old
-  human readable and the new JSON format are supported. The new JSON format
-  is easier to parse automatically, than the existing format.
+CTest
+-----
+
+* The :variable:`CTEST_CONFIGURATION_TYPE` variable is now set from the
+  command line when :manual:`ctest(1)` is invoked with ``-C <cfg>``.
+
+* The :manual:`ctest(1)` gained support for Dr. Memory to run
+  memcheck runs.
+
+* The :manual:`ctest(1)` tool gained a ``--no-tests=<[error|ignore]>`` option
+  to explicitly set and unify the behavior between direct invocation and
+  script mode if no tests were found.
+
+* The :manual:`ctest(1)` tool gained a ``--repeat <mode>:<n>`` option
+  to specify conditions in which to repeat tests.  This generalizes
+  the existing ``--repeat-until-fail <n>`` option to add modes for
+  ``until-pass`` and ``after-timeout``.
+
+* The :command:`ctest_test` command gained a ``REPEAT <mode>:<n>`` option
+  to specify conditions in which to repeat tests.
+
+CPack
+-----
+
+* The :cpack_gen:`CPack DragNDrop Generator` learned to use
+  the :variable:`CPACK_DMG_<component>_FILE_NAME` variable
+  to set a custom filename when packaging components into
+  their own DMGs.
+
+* The :cpack_gen:`CPack DragNDrop Generator` learned to handle
+  RTF formatted license files.  When :variable:`CPACK_DMG_SLA_DIR`
+  variable is set, ``<language>.license.rtf`` is considered, but
+  only as a fallback when the plaintext (``.txt``) file is not found
+  in order to maintain backwards compatibility.
+
+* The :cpack_gen:`CPack NSIS Generator` gained a new variable
+  :variable:`CPACK_NSIS_MUI_HEADERIMAGE` to set the header image.
+  To not break existing setups, it still defaults to
+  :variable:`CPACK_PACKAGE_ICON` if the new variable is not set.
+
+* The :cpack_gen:`CPack NSIS Generator` now supports
+  :variable:`CPACK_NSIS_UNINSTALL_NAME`.
+  This can be used to specify the name of the Uninstall program.
+
+* The :cpack_gen:`CPack NSIS Generator` now supports
+  :variable:`CPACK_NSIS_WELCOME_TITLE` and
+  :variable:`CPACK_NSIS_WELCOME_TITLE_3LINES`.
+  These can be used to specify the welcome page title and display it in 3 lines.
+
+* The :cpack_gen:`CPack NSIS Generator` now supports
+  :variable:`CPACK_NSIS_FINISH_TITLE` and
+  :variable:`CPACK_NSIS_FINISH_TITLE_3LINES`.
+  These can be used to specify the finish page title and display it in 3 lines.
+
+* The :cpack_gen:`CPack productbuild Generator` gained option
+  :variable:`CPACK_PRODUCTBUILD_BACKGROUND` to specify a background image
+  for the macOS installer.
+
+Other
+-----
+
+* :manual:`ccmake(1)` now displays cache values using colors
+  based on the entry type if the terminal supports color.
+
+* :manual:`ccmake(1)` now displays messages and a progress bar during
+  configure and generate.  It will keep the output displayed if any
+  errors or warnings occurred.
+
+Deprecated and Removed Features
+===============================
+
+* An explicit deprecation diagnostic was added for policy ``CMP0068``
+  and policy ``CMP0069`` (``CMP0067`` and below were already deprecated).
+  The :manual:`cmake-policies(7)` manual explains that the OLD behaviors
+  of all policies are deprecated and that projects should port to the
+  NEW behaviors.
+
+* The :cpack_gen:`CPack PackageMaker Generator` generator has been
+  deprecated because Xcode no longer distributes the PackageMaker tools.
+  The undocumented ``OSXX11`` generator has also been deprecated.
+
+* The :manual:`cmake(1)` command-line ``-E remove`` and ``-E remove_directory``
+  tools are deprecated in favor of the new ``-E rm`` tool.  The older tools
+  always returned 0 if a named path did not exist even without the force
+  option and cannot be fixed without breaking compatibility, and so have
+  been superseded.
+
+Other Changes
+=============
+
+* The :manual:`file API <cmake-file-api(7)>` index file now emits a
+  ``multiConfig`` flag specifying whether or not the generator supports
+  multiple output configurations.
 
 * Target link properties :prop_tgt:`INTERFACE_LINK_OPTIONS`,
   :prop_tgt:`INTERFACE_LINK_DIRECTORIES` and
   :prop_tgt:`INTERFACE_LINK_DEPENDS` are now transitive over private
-  dependency on static libraries.
+  dependencies on static libraries.
   See policy :policy:`CMP0099`.
 
-* The :command:`load_cache(READ_WITH_PREFIX)` command mode is now allowed
-  when using ``cmake -P`` to :ref:`Run a Script <Script Processing Mode>`.
-
 * When using MinGW tools, the :command:`find_library` command no longer
   finds ``.dll`` files by default.  Instead it expects ``.dll.a`` import
   libraries to be available.
@@ -213,70 +297,20 @@ Changes made since CMake 3.16 include the following.
 * The :generator:`MinGW Makefiles` generator no longer issues an error if
   ``sh.exe`` is present in the environment's ``PATH``.
 
-* :manual:`cmake(1)` gained a :generator:`Ninja Multi-Config` generator,
-  which is similar to the :generator:`Ninja` generator but can be used to build
-  multiple configurations at once.
-
-* The :command:`message` command gained new keywords ``CHECK_START``,
-  ``CHECK_PASS`` and ``CHECK_FAIL``.
-
-* The :generator:`Ninja` generator learned to perform some post-processing on
-  the generated files for more consistent builds.
-
 * The :generator:`Ninja` generator now prefers the first ninja build
   tool to appear in the ``PATH`` no matter whether it is called
   ``ninja-build``, ``ninja``, or ``samu``.  Previously the first
   of those names to appear anywhere in the ``PATH`` would be preferred.
 
-* Target properties :prop_tgt:`OSX_COMPATIBILITY_VERSION` and
-  :prop_tgt:`OSX_CURRENT_VERSION` were added to set the
-  ``compatibility_version`` and ``curent_version`` respectively
-  on macOS. For backwards compatibility, if these properties
-  are not set, :prop_tgt:`SOVERSION` and :prop_tgt:`VERSION`
-  are used respectively as fallbacks.
-
-* Since sdcc 3.2.0, sdcclib has been deprecated in favor of sdar as librarian.
-  Since sdcc 3.8.6, it has been removed from the distribution.
-  Use sdar if found, else use sdcclib to keep older compatibility.
+* With SDCC the ``sdar`` tool is now preferred over ``sdcclib`` as librarian.
+  The latter was deprecated by SDCC 3.2.0 and removed in SDCC 3.8.6.
 
-* The default flags used for SDCC no longer include any target-specific flags.
+* With SDCC the default flags no longer include any target-specific flags.
   Previously the default flags were hard-coded for 8051.
 
-* :command:`target_compile_options` command learns to honor ``BEFORE`` keyword
-  in all scopes. See policy :policy:`CMP0101`.
-
-* The :prop_tgt:`VS_DOTNET_DOCUMENTATION_FILE` target property was added
-  to tell :ref:`Visual Studio Generators` to generate a ``DocumentationFile``
-  reference in ``.csproj`` files.
-
-* :ref:`Visual Studio Generators` for VS 2010 and above learned to
-  support .NET Standard and .NET Core.  See the
-  :prop_tgt:`DOTNET_TARGET_FRAMEWORK` target property and
-  associated :variable:`CMAKE_DOTNET_TARGET_FRAMEWORK` variable.
-
-* :ref:`Visual Studio Generators` learned to support per-config sources.
-  Previously only :ref:`Command-Line Build Tool Generators` supported them.
-
-* With :ref:`Visual Studio Generators` for VS 2010 and above,
-  the :variable:`CMAKE_GENERATOR_TOOLSET` setting gained an option
-  to specify the ``VCTargetsPath`` value for project files.
-
 * The :variable:`CMAKE_VS_GLOBALS` variable value now applies during
   compiler identification and in targets created by the
   :command:`add_custom_target` command.
 
 * The :generator:`Xcode` generator no longer hard-codes ``-Wmost``,
   ``-Wno-four-char-constants``, and ``-Wno-unknown-pragmas`` warning flags.
-
-* The :variable:`CMAKE_XCODE_SCHEME_ENVIRONMENT` variable was added
-  to initialize the :prop_tgt:`XCODE_SCHEME_ENVIRONMENT` target property.
-
-* The Xcode generator learnt to set the value of the
-  ``Custom Working Directory`` schema
-  option with the :prop_tgt:`XCODE_SCHEME_WORKING_DIRECTORY`
-  target property.
-
-* The IBM XL Fortran compiler is now supported by the :generator:`Ninja`
-  generator.
-
-* The :module:`FindLibXml2` module now provides an imported target for the xmllint executable