Help: Move reference content to its own section at end of genex manual

This involves moving the Debugging section up to just after the
introduction. The content of that section is unchanged.
The reference section then follows, and since it is a dedicated
section, all existing sections thereunder were demoted one level.

Move the note about deviating from the usual CMake docs convention
of using angle brackets around placeholders out of the Introduction
and to the start of the reference section. No placeholders are used
before that point, so that content no longer belongs in the introduction.
Apply some minor wording cleanup to the content in the Introduction
that remained.

1 files changed, 53 insertions, 49 deletions

diff --git a/Help/manual/cmake-generator-expressions.7.rst b/Help/manual/cmake-generator-expressions.7.rst
index 8d98ff4..18147b3 100644
--- a/Help/manual/cmake-generator-expressions.7.rst
+++ b/Help/manual/cmake-generator-expressions.7.rst
@@ -11,31 +11,57 @@ Introduction
 ============
 
 Generator expressions are evaluated during build system generation to produce
-information specific to each build configuration.
+information specific to each build configuration.  They have the form
+``$<...>``.
 
 Generator expressions are allowed in the context of many target properties,
 such as :prop_tgt:`LINK_LIBRARIES`, :prop_tgt:`INCLUDE_DIRECTORIES`,
 :prop_tgt:`COMPILE_DEFINITIONS` and others.  They may also be used when using
 commands to populate those properties, such as :command:`target_link_libraries`,
 :command:`target_include_directories`, :command:`target_compile_definitions`
-and others.
+and others.  They enable conditional linking, conditional definitions used when
+compiling, conditional include directories, and more.  The conditions may be
+based on the build configuration, target properties, platform information,
+or any other queryable information.
 
-They enable conditional linking, conditional definitions used when compiling,
-conditional include directories, and more.  The conditions may be based on
-the build configuration, target properties, platform information or any other
-queryable information.
+Generator expressions can be nested, as shown in most of the examples below.
 
-Generator expressions have the form ``$<...>``.  To avoid confusion, this page
-deviates from most of the CMake documentation in that it omits angular brackets
-``<...>`` around placeholders like ``condition``, ``string``, ``target``,
-among others.
+Debugging
+=========
 
-Generator expressions can be nested, as shown in most of the examples below.
+Since generator expressions are evaluated during generation of the buildsystem,
+and not during processing of ``CMakeLists.txt`` files, it is not possible to
+inspect their result with the :command:`message()` command.  One possible way
+to generate debug messages is to add a custom target:
+
+.. code-block:: cmake
+
+  add_custom_target(genexdebug COMMAND ${CMAKE_COMMAND} -E echo "$<...>")
+
+After running ``cmake``, you can then build the ``genexdebug`` target to print
+the result of the ``$<...>`` expression (i.e. run the command
+``cmake --build ... --target genexdebug``).
+
+Another way is to write debug messages to a file with :command:`file(GENERATE)`:
+
+.. code-block:: cmake
+
+  file(GENERATE OUTPUT filename CONTENT "$<...>")
+
+Generator Expression Reference
+==============================
+
+.. note::
+
+  This reference deviates from most of the CMake documentation in that it
+  omits angular brackets ``<...>`` around placeholders like ``condition``,
+  ``string``, ``target``, etc.  This is to prevent an opportunity for those
+  placeholders to be misinterpreted as generator expressions.
 
 .. _`Boolean Generator Expressions`:
 
 Boolean Generator Expressions
-=============================
+-----------------------------
 
 Boolean expressions evaluate to either ``0`` or ``1``.
 They are typically used to construct the condition in a :ref:`conditional
@@ -44,7 +70,7 @@ generator expression<Conditional Generator Expressions>`.
 Available boolean expressions are:
 
 Logical Operators
------------------
+^^^^^^^^^^^^^^^^^
 
 .. genex:: $<BOOL:string>
 
@@ -78,7 +104,7 @@ Logical Operators
   ``0`` if ``condition`` is ``1``, else ``1``.
 
 String Comparisons
-------------------
+^^^^^^^^^^^^^^^^^^
 
 .. genex:: $<STREQUAL:string1,string2>
 
@@ -103,7 +129,7 @@ String Comparisons
   It uses case-sensitive comparisons.
 
 Version Comparisons
--------------------
+^^^^^^^^^^^^^^^^^^^
 
 .. genex:: $<VERSION_LESS:v1,v2>
 
@@ -130,7 +156,7 @@ Version Comparisons
   ``1`` if ``v1`` is a version greater than or equal to ``v2``, else ``0``.
 
 Path Comparisons
-----------------
+^^^^^^^^^^^^^^^^
 
 .. genex:: $<PATH_EQUAL:path1,path2>
 
@@ -145,7 +171,7 @@ Path Comparisons
 .. _GenEx Path Queries:
 
 Path Queries
-------------
+^^^^^^^^^^^^
 
 The ``$<PATH>`` generator expression offers the same capabilities as the
 :command:`cmake_path` command, for the :ref:`Query <Path Query>` options.
@@ -208,7 +234,7 @@ The ``$<PATH>`` generator expression can also be used for path
   :ref:`normalized <Normalization>` before the check.
 
 Variable Queries
-----------------
+^^^^^^^^^^^^^^^^
 
 .. genex:: $<TARGET_EXISTS:target>
 
@@ -564,7 +590,7 @@ Variable Queries
     correctly add target ``libother`` as link dependency.
 
 String-Valued Generator Expressions
-===================================
+-----------------------------------
 
 These expressions expand to some string.
 For example,
@@ -609,7 +635,7 @@ introduce a helper variable to keep the code readable:
 The following string-valued generator expressions are available:
 
 Escaped Characters
-------------------
+^^^^^^^^^^^^^^^^^^
 
 String literals to escape the special meaning a character would otherwise have:
 
@@ -628,7 +654,7 @@ String literals to escape the special meaning a character would otherwise have:
 .. _`Conditional Generator Expressions`:
 
 Conditional Expressions
------------------------
+^^^^^^^^^^^^^^^^^^^^^^^
 
 Conditional generator expressions depend on a boolean condition
 that must be ``0`` or ``1``.
@@ -658,7 +684,7 @@ otherwise expands to the empty string.
 .. _`String Transforming Generator Expressions`:
 
 String Transformations
-----------------------
+^^^^^^^^^^^^^^^^^^^^^^
 
 .. genex:: $<JOIN:list,string>
 
@@ -736,7 +762,7 @@ String Transformations
 .. _GenEx Path Decomposition:
 
 Path Decomposition
-------------------
+^^^^^^^^^^^^^^^^^^
 
 The ``$<PATH>`` generator expression offers the same capabilities as the
 :command:`cmake_path` command, for the
@@ -775,7 +801,7 @@ The ``$<PATH>`` generator expression can also be used for path
 .. _GenEx Path Transformations:
 
 Path Transformations
---------------------
+^^^^^^^^^^^^^^^^^^^^
 
 The ``$<PATH>`` generator expression offers the same capabilities as the
 :command:`cmake_path` command, for the
@@ -881,7 +907,7 @@ The ``$<PATH>`` generator expression can also be used for path
   See :ref:`cmake_path(ABSOLUTE_PATH) <ABSOLUTE_PATH>` for more details.
 
 Variable Queries
-----------------
+^^^^^^^^^^^^^^^^
 
 .. genex:: $<CONFIG>
 
@@ -1024,7 +1050,7 @@ Variable Queries
 .. _`Target-Dependent Queries`:
 
 Target-Dependent Queries
-------------------------
+^^^^^^^^^^^^^^^^^^^^^^^^
 
 These queries refer to a target ``tgt``. This can be any runtime artifact,
 namely:
@@ -1336,7 +1362,7 @@ which is just the string ``tgt``.
   :command:`install(RUNTIME_DEPENDENCY_SET)`, and empty otherwise.
 
 Output-Related Expressions
---------------------------
+^^^^^^^^^^^^^^^^^^^^^^^^^^
 
 .. genex:: $<TARGET_NAME:...>
 
@@ -1671,25 +1697,3 @@ Output-Related Expressions
   With the :generator:`Ninja Multi-Config` generator, generator expressions
   in ``...`` are evaluated using the custom command's "command config".
   With other generators, the content of ``...`` is evaluated normally.
-
-Debugging
-=========
-
-Since generator expressions are evaluated during generation of the buildsystem,
-and not during processing of ``CMakeLists.txt`` files, it is not possible to
-inspect their result with the :command:`message()` command.  One possible way
-to generate debug messages is to add a custom target:
-
-.. code-block:: cmake
-
-  add_custom_target(genexdebug COMMAND ${CMAKE_COMMAND} -E echo "$<...>")
-
-After running ``cmake``, you can then build the ``genexdebug`` target to print
-the result of the ``$<...>`` expression (i.e. run the command
-``cmake --build ... --target genexdebug``).
-
-Another way is to write debug messages to a file with :command:`file(GENERATE)`:
-
-.. code-block:: cmake
-
-  file(GENERATE OUTPUT filename CONTENT "$<...>")