Remove trailing whitespace from most CMake and C/C++ code

Our Git commit hooks disallow modification or addition of lines with
trailing whitespace.  Wipe out all remnants of trailing whitespace
everywhere except third-party code.

Run the following shell code:

git ls-files -z -- \
 bootstrap doxygen.config '*.readme' \
 '*.c' '*.cmake' '*.cpp' '*.cxx' \
 '*.el' '*.f' '*.f90' '*.h' '*.in' '*.in.l' '*.java' \
 '*.mm' '*.pike' '*.py' '*.txt' '*.vim' |
egrep -z -v '^(Utilities/cm|Source/(kwsys|CursesDialog/form)/)' |
egrep -z -v '^(Modules/CPack\..*\.in)' |
xargs -0 sed -i 's/ \+$//'

1 files changed, 73 insertions, 73 deletions

diff --git a/Modules/NSIS.template.in b/Modules/NSIS.template.in
index 43f72f6..7adfe14 100644
--- a/Modules/NSIS.template.in
+++ b/Modules/NSIS.template.in
@@ -37,7 +37,7 @@
   ;Set compression
   SetCompressor @CPACK_NSIS_COMPRESSOR@
 
-@CPACK_NSIS_DEFINES@   
+@CPACK_NSIS_DEFINES@
 
   !include Sections.nsh
 
@@ -71,7 +71,7 @@ Var AR_RegFlags
   ;  This macro reads component installed flag from the registry and
   ;changes checked state of the section on the components page.
   ;Input: section index constant name specified in Section command.
-   
+
   ClearErrors
   ;Reading component status from registry
   ReadRegDWORD $AR_RegFlags HKLM "Software\Microsoft\Windows\CurrentVersion\Uninstall\@CPACK_PACKAGE_INSTALL_REGISTRY_KEY@\Components\${SecName}" "Installed"
@@ -86,20 +86,20 @@ Var AR_RegFlags
   ; Note whether this component was installed before
   !insertmacro StoreVar ${SecName}_was_installed $AR_RegFlags
   IntOp $R0 $AR_RegFlags & $AR_RegFlags
-  
+
   ;Writing modified flags
   SectionSetFlags ${${SecName}} $AR_SecFlags
-  
+
  "default_${SecName}:"
  !insertmacro LoadSectionSelectedIntoVar ${SecName} ${SecName}_selected
 !macroend
- 
+
 !macro FinishSection SecName
   ;  This macro reads section flag set by user and removes the section
   ;if it is not selected.
   ;Then it writes component installed flag to registry
   ;Input: section index constant name specified in Section command.
- 
+
   SectionGetFlags ${${SecName}} $AR_SecFlags  ;Reading section flags
   ;Checking lowest bit:
   IntOp $AR_SecFlags $AR_SecFlags & ${SF_SELECTED}
@@ -110,20 +110,20 @@ Var AR_RegFlags
     WriteRegDWORD HKLM "Software\Microsoft\Windows\CurrentVersion\Uninstall\@CPACK_PACKAGE_INSTALL_REGISTRY_KEY@\Components\${SecName}" \
   "Installed" 0
     Goto "exit_${SecName}"
- 
+
  "leave_${SecName}:"
     ;Section is selected:
     WriteRegDWORD HKLM "Software\Microsoft\Windows\CurrentVersion\Uninstall\@CPACK_PACKAGE_INSTALL_REGISTRY_KEY@\Components\${SecName}" \
   "Installed" 1
- 
+
  "exit_${SecName}:"
 !macroend
- 
+
 !macro RemoveSection SecName
   ;  This macro is used to call section's Remove_... macro
   ;from the uninstaller.
   ;Input: section index constant name specified in Section command.
- 
+
   !insertmacro "Remove_${${SecName}}"
 !macroend
 
@@ -132,18 +132,18 @@ Var AR_RegFlags
   !insertmacro LoadVar ${SecName}_selected
   SectionGetFlags ${${SecName}} $R1
   IntOp $R1 $R1 & ${SF_SELECTED} ;Turn off all other bits
-  
+
   ; See if the status has changed:
   IntCmp $R0 $R1 "${SecName}_unchanged"
   !insertmacro LoadSectionSelectedIntoVar ${SecName} ${SecName}_selected
-  
+
   IntCmp $R1 ${SF_SELECTED} "${SecName}_was_selected"
   !insertmacro "Deselect_required_by_${SecName}"
   goto "${SecName}_unchanged"
-  
+
   "${SecName}_was_selected:"
   !insertmacro "Select_${SecName}_depends"
-  
+
   "${SecName}_unchanged:"
 !macroend
 ;--- End of Add/Remove macros ---
@@ -153,7 +153,7 @@ Var AR_RegFlags
 
   !define MUI_HEADERIMAGE
   !define MUI_ABORTWARNING
-    
+
 ;--------------------------------
 ; path functions
 
@@ -168,7 +168,7 @@ Var AR_RegFlags
 !include "WinMessages.NSH"
 !verbose 4
 ;====================================================
-; get_NT_environment 
+; get_NT_environment
 ;     Returns: the selected environment
 ;     Output : head of the stack
 ;====================================================
@@ -198,22 +198,22 @@ FunctionEnd
     !define WriteEnvStr_RegKey 'HKCU "Environment"'
   !endif
 !endif
- 
+
 ; AddToPath - Adds the given dir to the search path.
 ;        Input - head of the stack
 ;        Note - Win9x systems requires reboot
- 
+
 Function AddToPath
   Exch $0
   Push $1
   Push $2
   Push $3
- 
+
   # don't add if the path doesn't exist
   IfFileExists "$0\*.*" "" AddToPath_done
- 
+
   ReadEnvStr $1 PATH
-  ; if the path is too long for a NSIS variable NSIS will return a 0 
+  ; if the path is too long for a NSIS variable NSIS will return a 0
   ; length string.  If we find that, then warn and skip any path
   ; modification as it will trash the existing path.
   StrLen $2 $1
@@ -243,7 +243,7 @@ Function AddToPath
   Call StrStr
   Pop $2
   StrCmp $2 "" "" AddToPath_done
- 
+
   Call IsNT
   Pop $1
   StrCmp $1 1 AddToPath_NT
@@ -258,7 +258,7 @@ Function AddToPath
     FileClose $1
     SetRebootFlag true
     Goto AddToPath_done
- 
+
   AddToPath_NT:
     StrCmp $ADD_TO_PATH_ALL_USERS "1" ReadAllKey
       ReadRegStr $1 ${NT_current_env} "PATH"
@@ -279,7 +279,7 @@ Function AddToPath
         WriteRegExpandStr ${NT_all_env} "PATH" $0
       DoSend:
       SendMessage ${HWND_BROADCAST} ${WM_WININICHANGE} 0 "STR:Environment" /TIMEOUT=5000
- 
+
   AddToPath_done:
     Pop $3
     Pop $2
@@ -287,10 +287,10 @@ Function AddToPath
     Pop $0
 FunctionEnd
 
- 
+
 ; RemoveFromPath - Remove a given dir from the path
 ;     Input: head of the stack
- 
+
 Function un.RemoveFromPath
   Exch $0
   Push $1
@@ -299,9 +299,9 @@ Function un.RemoveFromPath
   Push $4
   Push $5
   Push $6
- 
+
   IntFmt $6 "%c" 26 # DOS EOF
- 
+
   Call un.IsNT
   Pop $1
   StrCmp $1 1 unRemoveFromPath_NT
@@ -313,7 +313,7 @@ Function un.RemoveFromPath
     GetFullPathName /SHORT $0 $0
     StrCpy $0 "SET PATH=%PATH%;$0"
     Goto unRemoveFromPath_dosLoop
- 
+
     unRemoveFromPath_dosLoop:
       FileRead $1 $3
       StrCpy $5 $3 1 -1 # read last char
@@ -328,7 +328,7 @@ Function un.RemoveFromPath
       unRemoveFromPath_dosLoopRemoveLine:
         SetRebootFlag true
         Goto unRemoveFromPath_dosLoop
- 
+
     unRemoveFromPath_dosLoopEnd:
       FileClose $2
       FileClose $1
@@ -337,7 +337,7 @@ Function un.RemoveFromPath
       CopyFiles /SILENT $4 "$1\autoexec.bat"
       Delete $4
       Goto unRemoveFromPath_done
- 
+
   unRemoveFromPath_NT:
     StrCmp $ADD_TO_PATH_ALL_USERS "1" unReadAllKey
       ReadRegStr $1 ${NT_current_env} "PATH"
@@ -361,11 +361,11 @@ Function un.RemoveFromPath
       StrCpy $5 $1 -$4 # $5 is now the part before the path to remove
       StrCpy $6 $2 "" $3 # $6 is now the part after the path to remove
       StrCpy $3 $5$6
- 
+
       StrCpy $5 $3 1 -1 # copy last char
       StrCmp $5 ";" 0 +2 # if last char == ;
         StrCpy $3 $3 -1 # remove last char
- 
+
       StrCmp $ADD_TO_PATH_ALL_USERS "1" unWriteAllKey
         WriteRegExpandStr ${NT_current_env} "PATH" $3
         Goto unDoSend
@@ -373,7 +373,7 @@ Function un.RemoveFromPath
         WriteRegExpandStr ${NT_all_env} "PATH" $3
       unDoSend:
       SendMessage ${HWND_BROADCAST} ${WM_WININICHANGE} 0 "STR:Environment" /TIMEOUT=5000
- 
+
   unRemoveFromPath_done:
     Pop $6
     Pop $5
@@ -383,7 +383,7 @@ Function un.RemoveFromPath
     Pop $1
     Pop $0
 FunctionEnd
- 
+
 ;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
 ; Uninstall sutff
 ;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
@@ -391,7 +391,7 @@ FunctionEnd
 ###########################################
 #            Utility Functions            #
 ###########################################
- 
+
 ;====================================================
 ; IsNT - Returns 1 if the current system is NT, 0
 ;        otherwise.
@@ -405,7 +405,7 @@ FunctionEnd
 ;   Call IsNT
 ;   Pop $R0
 ;  ($R0 at this point is 1 or 0)
- 
+
 !macro IsNT un
 Function ${un}IsNT
   Push $0
@@ -415,7 +415,7 @@ Function ${un}IsNT
   Pop $0
   Push 0
   Return
- 
+
   IsNT_yes:
     ; NT!!!
     Pop $0
@@ -424,7 +424,7 @@ FunctionEnd
 !macroend
 !insertmacro IsNT ""
 !insertmacro IsNT "un."
- 
+
 ; StrStr
 ; input, top of stack = string to search for
 ;        top of stack-1 = string to search in
@@ -437,7 +437,7 @@ FunctionEnd
 ;   Call StrStr
 ;   Pop $R0
 ;  ($R0 at this point is "ass string")
- 
+
 !macro StrStr un
 Function ${un}StrStr
 Exch $R1 ; st=haystack,old$R1, $R1=needle
@@ -516,7 +516,7 @@ Function DownloadFile
 
   try_again:
     NSISdl::download "$1/$0" "$INSTDIR\$0"
-    
+
     Pop $1
     StrCmp $1 "success" success
     StrCmp $1 "Cancelled" cancel
@@ -549,10 +549,10 @@ FunctionEnd
   !insertmacro MUI_PAGE_LICENSE "@CPACK_RESOURCE_FILE_LICENSE@"
   Page custom InstallOptionsPage
   !insertmacro MUI_PAGE_DIRECTORY
-  
+
   ;Start Menu Folder Page Configuration
-  !define MUI_STARTMENUPAGE_REGISTRY_ROOT "SHCTX" 
-  !define MUI_STARTMENUPAGE_REGISTRY_KEY "Software\@CPACK_PACKAGE_VENDOR@\@CPACK_PACKAGE_INSTALL_REGISTRY_KEY@" 
+  !define MUI_STARTMENUPAGE_REGISTRY_ROOT "SHCTX"
+  !define MUI_STARTMENUPAGE_REGISTRY_KEY "Software\@CPACK_PACKAGE_VENDOR@\@CPACK_PACKAGE_INSTALL_REGISTRY_KEY@"
   !define MUI_STARTMENUPAGE_REGISTRY_VALUENAME "Start Menu Folder"
   !insertmacro MUI_PAGE_STARTMENU Application $STARTMENU_FOLDER
 
@@ -639,10 +639,10 @@ Section "-Core installation"
   SetOutPath "$INSTDIR"
   @CPACK_NSIS_EXTRA_PREINSTALL_COMMANDS@
   @CPACK_NSIS_FULL_INSTALL@
-  
+
   ;Store installation folder
   WriteRegStr SHCTX "Software\@CPACK_PACKAGE_VENDOR@\@CPACK_PACKAGE_INSTALL_REGISTRY_KEY@" "" $INSTDIR
-  
+
   ;Create uninstaller
   WriteUninstaller "$INSTDIR\Uninstall.exe"
   Push "DisplayName"
@@ -660,7 +660,7 @@ Section "-Core installation"
   Push "NoRepair"
   Push "1"
   Call ConditionalAddToRegisty
-  
+
   !ifdef CPACK_NSIS_ADD_REMOVE
   ;Create add/remove functionality
   Push "ModifyPath"
@@ -671,7 +671,7 @@ Section "-Core installation"
   Push "1"
   Call ConditionalAddToRegisty
   !endif
-  
+
   ; Optional registration
   Push "DisplayIcon"
   Push "$INSTDIR\@CPACK_NSIS_INSTALLED_ICON_NAME@"
@@ -687,7 +687,7 @@ Section "-Core installation"
   Call ConditionalAddToRegisty
   !insertmacro MUI_INSTALLOPTIONS_READ $INSTALL_DESKTOP "NSIS.InstallOptions.ini" "Field 5" "State"
   !insertmacro MUI_STARTMENU_WRITE_BEGIN Application
-  
+
   ;Create shortcuts
   CreateDirectory "$SMPROGRAMS\$STARTMENU_FOLDER"
 @CPACK_NSIS_CREATE_ICONS@
@@ -725,7 +725,7 @@ SectionEnd
 Section "-Add to path"
   Push $INSTDIR\bin
   StrCmp "@CPACK_NSIS_MODIFY_PATH@" "ON" 0 doNotAddToPath
-  StrCmp $DO_NOT_ADD_TO_PATH "1" doNotAddToPath 0  
+  StrCmp $DO_NOT_ADD_TO_PATH "1" doNotAddToPath 0
     Call AddToPath
   doNotAddToPath:
 SectionEnd
@@ -756,12 +756,12 @@ Function un.onInit
     SetShellVarContext all
     ;MessageBox MB_OK 'User "$0" is in the Power Users group'
     Goto done
-    
+
   noLM:
     ;Get installation folder from registry if available
 
   done:
-    
+
 FunctionEnd
 
 ;--- Add/Remove callback functions: ---
@@ -770,25 +770,25 @@ FunctionEnd
   ;List all of your components in following manner here.
 @CPACK_NSIS_COMPONENT_SECTION_LIST@
 !macroend
- 
+
 Section -FinishComponents
   ;Removes unselected components and writes component status to registry
   !insertmacro SectionList "FinishSection"
-  
-!ifdef CPACK_NSIS_ADD_REMOVE  
+
+!ifdef CPACK_NSIS_ADD_REMOVE
   ; Get the name of the installer executable
   System::Call 'kernel32::GetModuleFileNameA(i 0, t .R0, i 1024) i r1'
   StrCpy $R3 $R0
-  
+
   ; Strip off the last 13 characters, to see if we have AddRemove.exe
   StrLen $R1 $R0
   IntOp $R1 $R0 - 13
   StrCpy $R2 $R0 13 $R1
   StrCmp $R2 "AddRemove.exe" addremove_installed
-  
+
   ; We're not running AddRemove.exe, so install it
   CopyFiles $R3 $INSTDIR\AddRemove.exe
-  
+
   addremove_installed:
 !endif
 SectionEnd
@@ -825,7 +825,7 @@ Section "Uninstall"
 @CPACK_NSIS_DELETE_FILES@
 @CPACK_NSIS_DELETE_DIRECTORIES@
 
-!ifdef CPACK_NSIS_ADD_REMOVE  
+!ifdef CPACK_NSIS_ADD_REMOVE
   ;Remove the add/remove program
   Delete "$INSTDIR\AddRemove.exe"
 !endif
@@ -842,23 +842,23 @@ Section "Uninstall"
 
   ; Removes all optional components
   !insertmacro SectionList "RemoveSection"
-  
+
   !insertmacro MUI_STARTMENU_GETFOLDER Application $MUI_TEMP
-    
+
   Delete "$SMPROGRAMS\$MUI_TEMP\Uninstall.lnk"
 @CPACK_NSIS_DELETE_ICONS@
 @CPACK_NSIS_DELETE_ICONS_EXTRA@
-  
+
   ;Delete empty start menu parent diretories
   StrCpy $MUI_TEMP "$SMPROGRAMS\$MUI_TEMP"
- 
+
   startMenuDeleteLoop:
     ClearErrors
     RMDir $MUI_TEMP
     GetFullPathName $MUI_TEMP "$MUI_TEMP\.."
-    
+
     IfErrors startMenuDeleteLoopDone
-  
+
     StrCmp "$MUI_TEMP" "$SMPROGRAMS" startMenuDeleteLoopDone startMenuDeleteLoop
   startMenuDeleteLoopDone:
 
@@ -867,17 +867,17 @@ Section "Uninstall"
   StrCpy $MUI_TEMP "$START_MENU"
   Delete "$SMPROGRAMS\$MUI_TEMP\Uninstall.lnk"
 @CPACK_NSIS_DELETE_ICONS_EXTRA@
-  
+
   ;Delete empty start menu parent diretories
   StrCpy $MUI_TEMP "$SMPROGRAMS\$MUI_TEMP"
- 
+
   secondStartMenuDeleteLoop:
     ClearErrors
     RMDir $MUI_TEMP
     GetFullPathName $MUI_TEMP "$MUI_TEMP\.."
-    
+
     IfErrors secondStartMenuDeleteLoopDone
-  
+
     StrCmp "$MUI_TEMP" "$SMPROGRAMS" secondStartMenuDeleteLoopDone secondStartMenuDeleteLoop
   secondStartMenuDeleteLoopDone:
 
@@ -925,14 +925,14 @@ inst:
   ; Reads components status for registry
   !insertmacro SectionList "InitSection"
 
-  ; check to see if /D has been used to change 
-  ; the install directory by comparing it to the 
+  ; check to see if /D has been used to change
+  ; the install directory by comparing it to the
   ; install directory that is expected to be the
   ; default
   StrCpy $IS_DEFAULT_INSTALLDIR 0
   StrCmp "$INSTDIR" "@CPACK_NSIS_INSTALL_ROOT@\@CPACK_PACKAGE_INSTALL_DIRECTORY@" 0 +2
     StrCpy $IS_DEFAULT_INSTALLDIR 1
-  
+
   StrCpy $SV_ALLUSERS "JustMe"
   ; if default install dir then change the default
   ; if it is installed for JustMe
@@ -955,7 +955,7 @@ inst:
     ;MessageBox MB_OK 'User "$0" is in the Power Users group'
     StrCpy $SV_ALLUSERS "AllUsers"
     Goto done
-    
+
   noLM:
     StrCpy $SV_ALLUSERS "AllUsers"
     ;Get installation folder from registry if available