Fix spelling and typos (non-binary)

14 files changed, 24 insertions, 24 deletions

diff --git a/Modules/CMakeFindPackageMode.cmake b/Modules/CMakeFindPackageMode.cmake
index cea0187..e5216f4 100644
--- a/Modules/CMakeFindPackageMode.cmake
+++ b/Modules/CMakeFindPackageMode.cmake
@@ -3,7 +3,7 @@
 #   NAME = name of the package
 #   COMPILER_ID = the CMake compiler ID for which the result is, i.e. GNU/Intel/Clang/MSVC, etc.
 #   LANGUAGE = language for which the result will be used, i.e. C/CXX/Fortan/ASM
-#   MODE = EXIST : only check for existance of the given package
+#   MODE = EXIST : only check for existence of the given package
 #          COMPILE : print the flags needed for compiling an object file which uses the given package
 #          LINK : print the flags needed for linking when using the given package
 #   QUIET = if TRUE, don't print anything
diff --git a/Modules/CMakeParseArguments.cmake b/Modules/CMakeParseArguments.cmake
index 406780e..016da0c 100644
--- a/Modules/CMakeParseArguments.cmake
+++ b/Modules/CMakeParseArguments.cmake
@@ -51,7 +51,7 @@
 #   MY_INSTALL_CONFIGURATIONS = "" (was not used)
 #   MY_INSTALL_UNPARSED_ARGUMENTS = "blub" (no value expected after "OPTIONAL"
 #
-# You can the continue and process these variables.
+# You can then continue and process these variables.
 #
 # Keywords terminate lists of values, e.g. if directly after a one_value_keyword
 # another recognized keyword follows, this is interpreted as the beginning of
diff --git a/Modules/CPackPackageMaker.cmake b/Modules/CPackPackageMaker.cmake
index 45ba465..98ca9e2 100644
--- a/Modules/CPackPackageMaker.cmake
+++ b/Modules/CPackPackageMaker.cmake
@@ -2,7 +2,7 @@
 ##end
 ##module
 # - PackageMaker CPack generator (Mac OS X).
-# The following variable is specific to installers build on Mac OS X
+# The following variable is specific to installers built on Mac OS X
 # using PackageMaker:
 ##end
 #
diff --git a/Modules/CheckFunctionExists.cmake b/Modules/CheckFunctionExists.cmake
index 7aa1748..ead1354 100644
--- a/Modules/CheckFunctionExists.cmake
+++ b/Modules/CheckFunctionExists.cmake
@@ -4,7 +4,7 @@
 # Check that the <function> is provided by libraries on the system and
 # store the result in a <variable>.  This does not verify that any
 # system header file declares the function, only that it can be found
-# at link time (considure using CheckSymbolExists).
+# at link time (consider using CheckSymbolExists).
 #
 # The following variables may be set before calling this macro to
 # modify the way the check is run:
diff --git a/Modules/CheckSizeOf.cmake b/Modules/CheckSizeOf.cmake
index 9f587b5..f0707df 100644
--- a/Modules/CheckSizeOf.cmake
+++ b/Modules/CheckSizeOf.cmake
@@ -15,4 +15,4 @@
 message(SEND_ERROR
         "Modules/CheckSizeOf.cmake has been removed.  "
         "Use Modules/CheckTypeSize.cmake instead.  This "
-        "compatability check may be removed before the next release!")
+        "compatibility check may be removed before the next release!")
diff --git a/Modules/FindBoost.cmake b/Modules/FindBoost.cmake
index 8d8b10c..7f79b14 100644
--- a/Modules/FindBoost.cmake
+++ b/Modules/FindBoost.cmake
@@ -41,7 +41,7 @@
 #  Boost_LIBRARY_DIR         - Directory containing Boost libraries
 #  Boost_<C>_LIBRARY_DEBUG   - Component <C> library debug variant
 #  Boost_<C>_LIBRARY_RELEASE - Component <C> library release variant
-# Users may set the these hints or results as cache entries.  Projects should
+# Users may set these hints or results as cache entries.  Projects should
 # not read these entries directly but instead use the above result variables.
 # Note that some hint names start in upper-case "BOOST".  One may specify
 # these as environment variables if they are not specified as CMake variables
@@ -154,7 +154,7 @@
 
 
 #-------------------------------------------------------------------------------
-# Before we go searching, check whether boost-cmake is avaialble, unless the
+# Before we go searching, check whether boost-cmake is available, unless the
 # user specifically asked NOT to search for boost-cmake.
 #
 # If Boost_DIR is set, this behaves as any find_package call would. If not,
@@ -247,7 +247,7 @@ macro(_Boost_ADJUST_LIB_VARS basename)
     endif()
 
   endif()
-  # Make variables changeble to the advanced user
+  # Make variables changeable to the advanced user
   mark_as_advanced(
       Boost_${basename}_LIBRARY_RELEASE
       Boost_${basename}_LIBRARY_DEBUG
diff --git a/Modules/FindFLTK2.cmake b/Modules/FindFLTK2.cmake
index 071c318..09f6925 100644
--- a/Modules/FindFLTK2.cmake
+++ b/Modules/FindFLTK2.cmake
@@ -45,7 +45,7 @@ if(APPLE)
   set( FLTK2_PLATFORM_DEPENDENT_LIBS  "-framework Carbon -framework Cocoa -framework ApplicationServices -lz")
 endif()
 
-# If FLTK2_INCLUDE_DIR is already defined we assigne its value to FLTK2_DIR
+# If FLTK2_INCLUDE_DIR is already defined we assign its value to FLTK2_DIR
 if(FLTK2_INCLUDE_DIR)
   set(FLTK2_DIR ${FLTK2_INCLUDE_DIR})
 else()
diff --git a/Modules/FindITK.cmake b/Modules/FindITK.cmake
index b0b3f03..2929a76 100644
--- a/Modules/FindITK.cmake
+++ b/Modules/FindITK.cmake
@@ -17,7 +17,7 @@
 #
 #  USE_ITK_FILE - The full path to the UseITK.cmake file.
 #                 This is provided for backward
-#                 compatability.  Use ITK_USE_FILE
+#                 compatibility.  Use ITK_USE_FILE
 #                 instead.
 
 #=============================================================================
@@ -52,6 +52,6 @@ if(NOT ITK_FOUND)
 endif()
 
 if(ITK_FOUND)
-  # Set USE_ITK_FILE for backward-compatability.
+  # Set USE_ITK_FILE for backward-compatibility.
   set(USE_ITK_FILE ${ITK_USE_FILE})
 endif()
diff --git a/Modules/FindMPI.cmake b/Modules/FindMPI.cmake
index 143d10a..0eb86a8 100644
--- a/Modules/FindMPI.cmake
+++ b/Modules/FindMPI.cmake
@@ -86,7 +86,7 @@ include(${CMAKE_CURRENT_LIST_DIR}/GetPrerequisites.cmake)
 #
 # The compilers are detected in this order:
 #
-# 1. Try to find the most generic availble MPI compiler, as this is usually set up by
+# 1. Try to find the most generic available MPI compiler, as this is usually set up by
 #    cluster admins.  e.g., if plain old mpicc is available, we'll use it and assume it's
 #    the right compiler.
 #
diff --git a/Modules/FindQt4.cmake b/Modules/FindQt4.cmake
index 21e8e91..4f3e634 100644
--- a/Modules/FindQt4.cmake
+++ b/Modules/FindQt4.cmake
@@ -115,7 +115,7 @@
 #        You should have a look on the AUTOMOC property for targets to achieve the same results.
 #
 #  macro QT4_ADD_DBUS_INTERFACE(outfiles interface basename)
-#        Create a the interface header and implementation files with the
+#        Create the interface header and implementation files with the
 #        given basename from the given interface xml file and add it to
 #        the list of sources.
 #
@@ -171,7 +171,7 @@
 #        in:  ts_files
 #        generates commands to create .qm from .ts - files. The generated
 #        filenames can be found in qm_files. The ts_files
-#        must exists and are not updated in any way.
+#        must exist and are not updated in any way.
 #
 # function QT4_USE_MODULES( target [link_type] modules...)
 #        Make <target> use the <modules> from Qt. Using a Qt module means
@@ -495,7 +495,7 @@ macro (_QT4_ADJUST_LIB_VARS _camelCaseBasename)
     set(QT_INCLUDES "${QT_${basename}_INCLUDE_DIR}" ${QT_INCLUDES})
   endif ()
 
-  # Make variables changeble to the advanced user
+  # Make variables changeable to the advanced user
   mark_as_advanced(QT_${basename}_LIBRARY QT_${basename}_LIBRARY_RELEASE QT_${basename}_LIBRARY_DEBUG QT_${basename}_INCLUDE_DIR)
 endmacro ()
 
@@ -771,7 +771,7 @@ if (QT_QMAKE_EXECUTABLE AND QTVERSION)
     endif()
   endif ()
 
-  # Make variables changeble to the advanced user
+  # Make variables changeable to the advanced user
   mark_as_advanced( QT_LIBRARY_DIR QT_DOC_DIR QT_MKSPECS_DIR
                     QT_PLUGINS_DIR QT_TRANSLATIONS_DIR)
 
diff --git a/Modules/FindVTK.cmake b/Modules/FindVTK.cmake
index 0dede2d..085d60d 100644
--- a/Modules/FindVTK.cmake
+++ b/Modules/FindVTK.cmake
@@ -51,7 +51,7 @@ if("${VTK_FIND_VERSION}" VERSION_LESS 4.1)
   endif()
 endif()
 
-# Construct consitent error messages for use below.
+# Construct consistent error messages for use below.
 set(VTK_DIR_DESCRIPTION "directory containing VTKConfig.cmake.  This is either the root of the build tree, or PREFIX/lib/vtk for an installation.")
 if(_VTK_40_ALLOW)
   set(VTK_DIR_DESCRIPTION "${VTK_DIR_DESCRIPTION}  For VTK 4.0, this is the location of UseVTK.cmake.  This is either the root of the build tree or PREFIX/include/vtk for an installation.")
@@ -127,7 +127,7 @@ endif()
 
 #-----------------------------------------------------------------------------
 if(VTK_FOUND)
-  # Set USE_VTK_FILE for backward-compatability.
+  # Set USE_VTK_FILE for backward-compatibility.
   set(USE_VTK_FILE ${VTK_USE_FILE})
 else()
   # VTK not found, explain to the user how to specify its location.
diff --git a/Modules/FindwxWindows.cmake b/Modules/FindwxWindows.cmake
index 4179f7b..868d20c 100644
--- a/Modules/FindwxWindows.cmake
+++ b/Modules/FindwxWindows.cmake
@@ -321,7 +321,7 @@ if(WIN32_STYLE_FIND)
       rpcrt4
       wsock32
       )
-    ## HACK: feed in to optimized / debug libaries if both were FOUND.
+    ## HACK: feed in to optimized / debug libraries if both were FOUND.
     set(WXWINDOWS_STATIC_DEBUG_LIBS ${WXWINDOWS_STATIC_DEBUG_LIBS}
       wxbase26d
       wxbase26d_net
@@ -354,7 +354,7 @@ if(WIN32_STYLE_FIND)
   ##
 
   ## if there is at least one shared lib available
-  ## let user choose wether to use shared or static wxwindows libs
+  ## let user choose whether to use shared or static wxwindows libs
   if(WXWINDOWS_SHARED_LIBRARY OR WXWINDOWS_SHARED_DEBUG_LIBRARY)
     ## default value OFF because wxWindows MSVS default build is static
     option(WXWINDOWS_USE_SHARED_LIBS
@@ -606,7 +606,7 @@ else()
       ../wx/bin
       ../../wx/bin )
 
-    # check wether wx-config was found:
+    # check whether wx-config was found:
     if(CMAKE_WXWINDOWS_WXCONFIG_EXECUTABLE)
 
       # use shared/static wx lib?
diff --git a/Modules/Platform/Windows-MSVC.cmake b/Modules/Platform/Windows-MSVC.cmake
index f9df6d8..09d69e6 100644
--- a/Modules/Platform/Windows-MSVC.cmake
+++ b/Modules/Platform/Windows-MSVC.cmake
@@ -22,7 +22,7 @@ set(CMAKE_LIBRARY_PATH_FLAG "-LIBPATH:")
 set(CMAKE_LINK_LIBRARY_FLAG "")
 set(MSVC 1)
 
-# hack: if a new cmake (which uses CMAKE__LINKER) runs on an old build tree
+# hack: if a new cmake (which uses CMAKE_LINKER) runs on an old build tree
 # (where link was hardcoded) and where CMAKE_LINKER isn't in the cache
 # and still cmake didn't fail in CMakeFindBinUtils.cmake (because it isn't rerun)
 # hardcode CMAKE_LINKER here to link, so it behaves as it did before, Alex
diff --git a/Modules/UseEcos.cmake b/Modules/UseEcos.cmake
index 028df82..0c4fee4 100644
--- a/Modules/UseEcos.cmake
+++ b/Modules/UseEcos.cmake
@@ -132,10 +132,10 @@ macro(ECOS_ADJUST_DIRECTORY _target_FILES )
 endmacro()
 
 # the default ecos config file name
-# maybe in the future also out-of-source builds may be possible
+# maybe in future also out-of-source builds may be possible
 set(ECOS_CONFIG_FILE ecos.ecc)
 
-#creates the dependancy from all source files on the ecos target.ld,
+#creates the dependency from all source files on the ecos target.ld,
 #adds the command for compiling ecos
 macro(ECOS_ADD_TARGET_LIB)
 # when building out-of-source, create the ecos/ subdir