Merge topic 'ExactCaseReadmeTxt'

5479251 Modules/readme.txt: make lines a bit shorter for easier readability
140692d Modules/readme.txt: switch from "XXX" to "Xxx"

1 files changed, 65 insertions, 50 deletions

diff --git a/Modules/readme.txt b/Modules/readme.txt
index 9dc1c6a..2f11994 100644
--- a/Modules/readme.txt
+++ b/Modules/readme.txt
@@ -1,50 +1,65 @@
 For more information about how to contribute modules to CMake, see this page:
 http://www.itk.org/Wiki/CMake:Module_Maintainers
 
-Note to authors of FindXXX.cmake files
+Note to authors of FindXxx.cmake files
 
-We would like all FindXXX.cmake files to produce consistent variable names.
+We would like all FindXxx.cmake files to produce consistent variable names.
 
 Please use the following consistent variable names for general use.
 
-XXX_INCLUDE_DIRS        The final set of include directories listed in one variable for use by client code.  This should not be a cache entry.
-XXX_LIBRARIES           The libraries to link against to use XXX. These should include full paths.  This should not be a cache entry.
-XXX_DEFINITIONS         Definitions to use when compiling code that uses XXX. This really shouldn't include options such as (-DHAS_JPEG)that a client source-code file uses to decide whether to #include <jpeg.h>
-XXX_EXECUTABLE          Where to find the XXX tool.
-XXX_YYY_EXECUTABLE      Where to find the YYY tool that comes with XXX.
-XXX_LIBRARY_DIRS        Optionally, the final set of library directories listed in one variable for use by client code.  This should not be a cache entry.
-XXX_ROOT_DIR            Where to find the base directory of XXX.
-XXX_VERSION_YY          Expect Version YY if true. Make sure at most one of these is ever true.
-XXX_WRAP_YY             If False, do not try to use the relevent CMake wrapping command.
-XXX_YY_FOUND            If False, optional YY part of XXX sytem is not available.
-XXX_FOUND               Set to false, or undefined, if we haven't found, or don't want to use XXX.
-XXX_NOT_FOUND_MESSAGE   Should be set by config-files in the case that it has set XXX_FOUND to FALSE.
+Xxx_INCLUDE_DIRS        The final set of include directories listed in one variable for use by client code.
+                        This should not be a cache entry.
+Xxx_LIBRARIES           The libraries to link against to use Xxx. These should include full paths.
+                        This should not be a cache entry.
+Xxx_DEFINITIONS         Definitions to use when compiling code that uses Xxx. This really shouldn't include options such
+                        as (-DHAS_JPEG)that a client source-code file uses to decide whether to #include <jpeg.h>
+Xxx_EXECUTABLE          Where to find the Xxx tool.
+Xxx_Yyy_EXECUTABLE      Where to find the Yyy tool that comes with Xxx.
+Xxx_LIBRARY_DIRS        Optionally, the final set of library directories listed in one variable for use by client code.
+                        This should not be a cache entry.
+Xxx_ROOT_DIR            Where to find the base directory of Xxx.
+Xxx_VERSION_Yy          Expect Version Yy if true. Make sure at most one of these is ever true.
+Xxx_WRAP_Yy             If False, do not try to use the relevant CMake wrapping command.
+Xxx_Yy_FOUND            If False, optional Yy part of Xxx sytem is not available.
+Xxx_FOUND               Set to false, or undefined, if we haven't found, or don't want to use Xxx.
+Xxx_NOT_FOUND_MESSAGE   Should be set by config-files in the case that it has set Xxx_FOUND to FALSE.
                         The contained message will be printed by the find_package() command and by
                         find_package_handle_standard_args() to inform the user about the problem.
-XXX_RUNTIME_LIBRARY_DIRS Optionally, the runtime library search path for use when running an executable linked to shared libraries.
+Xxx_RUNTIME_LIBRARY_DIRS Optionally, the runtime library search path for use when running an executable linked to
+                         shared libraries.
                          The list should be used by user code to create the PATH on windows or LD_LIBRARY_PATH on unix.
                          This should not be a cache entry.
-XXX_VERSION_STRING      A human-readable string containing the version of the package found, if any.
-XXX_VERSION_MAJOR       The major version of the package found, if any.
-XXX_VERSION_MINOR       The minor version of the package found, if any.
-XXX_VERSION_PATCH       The patch version of the package found, if any.
+Xxx_VERSION_STRING      A human-readable string containing the version of the package found, if any.
+Xxx_VERSION_MAJOR       The major version of the package found, if any.
+Xxx_VERSION_MINOR       The minor version of the package found, if any.
+Xxx_VERSION_PATCH       The patch version of the package found, if any.
 
-You do not have to provide all of the above variables. You should provide XXX_FOUND under most circumstances. If XXX is a library, then  XXX_LIBRARIES, should also be defined, and XXX_INCLUDE_DIRS should usually be defined (I guess libm.a might be an exception)
+You do not have to provide all of the above variables. You should provide Xxx_FOUND under most circumstances.
+If Xxx is a library, then  Xxx_LIBRARIES, should also be defined, and Xxx_INCLUDE_DIRS should usually be
+defined (I guess libm.a might be an exception)
 
-The following names should not usually be used in CMakeLists.txt files, but they may be usefully modified in users' CMake Caches to control stuff.
+The following names should not usually be used in CMakeLists.txt files, but they may be usefully modified in
+users' CMake Caches to control stuff.
 
-XXX_LIBRARY             Name of XXX Library. A User may set this and XXX_INCLUDE_DIR to ignore to force non-use of XXX.
-XXX_YY_LIBRARY          Name of YY library that is part of the XXX system. It may or may not be required to use XXX.
-XXX_INCLUDE_DIR         Where to find xxx.h, etc.  (XXX_INCLUDE_PATH was considered bad because a path includes an actual filename.)
-XXX_YY_INCLUDE_DIR      Where to find xxx_yy.h, etc.
+Xxx_LIBRARY             Name of Xxx Library. A User may set this and Xxx_INCLUDE_DIR to ignore to force non-use of Xxx.
+Xxx_Yy_LIBRARY          Name of Yy library that is part of the Xxx system. It may or may not be required to use Xxx.
+Xxx_INCLUDE_DIR         Where to find xxx.h, etc.  (Xxx_INCLUDE_PATH was considered bad because a path includes an
+                        actual filename.)
+Xxx_Yy_INCLUDE_DIR      Where to find xxx_yy.h, etc.
 
-For tidiness's sake, try to keep as many options as possible out of the cache, leaving at least one option which can be used to disable use of the module, or locate a not-found library (e.g. XXX_ROOT_DIR). For the same reason, mark most cache options as advanced.
+For tidiness's sake, try to keep as many options as possible out of the cache, leaving at least one option which can be
+used to disable use of the module, or locate a not-found library (e.g. Xxx_ROOT_DIR).
+For the same reason, mark most cache options as advanced.
 
-If you need other commands to do special things then it should still begin with XXX_. This gives a sort of namespace effect and keeps things tidy for the user. You should put comments describing all the exported settings, plus descriptions of any the users can use to control stuff.
+If you need other commands to do special things then it should still begin with Xxx_. This gives a sort of namespace
+effect and keeps things tidy for the user. You should put comments describing all the exported settings, plus
+descriptions of any the users can use to control stuff.
 
-You really should also provide backwards compatibility any old settings that were actually in use. Make sure you comment them as deprecated, so that no-one starts using them.
+You really should also provide backwards compatibility any old settings that were actually in use.
+Make sure you comment them as deprecated, so that no-one starts using them.
 
-To correctly document a module, create a comment block at the top with # comments.  There are three types of comments that can be in the block:
+To correctly document a module, create a comment block at the top with # comments.
+There are three types of comments that can be in the block:
 
 1. The brief description of the module, this is done by:
 # - a small description
@@ -67,7 +82,7 @@ For example:
 #  VAR_REALLY_COOL - cool right?
 #
 
-Test the documentation formatting by running "cmake --help-module FindXXX".
+Test the documentation formatting by running "cmake --help-module FindXxx".
 Edit the comments until the output of this command looks satisfactory.
 
 To have a .cmake file in this directory NOT show up in the
@@ -93,38 +108,38 @@ copyright and licence notice block like this one:
 The layout of the notice block is strictly enforced by the ModuleNotices test.
 Only the year range and name may be changed freely.
 
-A FindXXX.cmake module will typically be loaded by the command
+A FindXxx.cmake module will typically be loaded by the command
 
-  FIND_PACKAGE(XXX [major[.minor[.patch[.tweak]]]] [EXACT]
+  FIND_PACKAGE(Xxx [major[.minor[.patch[.tweak]]]] [EXACT]
                [QUIET] [[REQUIRED|COMPONENTS] [components...]])
 
 If any version numbers are given to the command it will set the
 following variables before loading the module:
 
-  XXX_FIND_VERSION       = full requested version string
-  XXX_FIND_VERSION_MAJOR = major version if requested, else 0
-  XXX_FIND_VERSION_MINOR = minor version if requested, else 0
-  XXX_FIND_VERSION_PATCH = patch version if requested, else 0
-  XXX_FIND_VERSION_TWEAK = tweak version if requested, else 0
-  XXX_FIND_VERSION_COUNT = number of version components, 0 to 4
-  XXX_FIND_VERSION_EXACT = true if EXACT option was given
+  Xxx_FIND_VERSION       = full requested version string
+  Xxx_FIND_VERSION_MAJOR = major version if requested, else 0
+  Xxx_FIND_VERSION_MINOR = minor version if requested, else 0
+  Xxx_FIND_VERSION_PATCH = patch version if requested, else 0
+  Xxx_FIND_VERSION_TWEAK = tweak version if requested, else 0
+  Xxx_FIND_VERSION_COUNT = number of version components, 0 to 4
+  Xxx_FIND_VERSION_EXACT = true if EXACT option was given
 
 If the find module supports versioning it should locate a version of
 the package that is compatible with the version requested.  If a
 compatible version of the package cannot be found the module should
 not report success.  The version of the package found should be stored
-in "XXX_VERSION..." version variables documented by the module.
+in "Xxx_VERSION..." version variables documented by the module.
 
 If the QUIET option is given to the command it will set the variable
-XXX_FIND_QUIETLY to true before loading the FindXXX.cmake module.  If
+Xxx_FIND_QUIETLY to true before loading the FindXxx.cmake module.  If
 this variable is set the module should not complain about not being
 able to find the package.  If the
 REQUIRED option is given to the command it will set the variable
-XXX_FIND_REQUIRED to true before loading the FindXXX.cmake module.  If
+Xxx_FIND_REQUIRED to true before loading the FindXxx.cmake module.  If
 this variable is set the module should issue a FATAL_ERROR if the
 package cannot be found.
 If neither the QUIET nor REQUIRED options are given then the
-FindXXX.cmake module should look for the package and complain without
+FindXxx.cmake module should look for the package and complain without
 error if the module is not found.
 
 FIND_PACKAGE() will set the variable CMAKE_FIND_PACKAGE_NAME to
@@ -133,19 +148,19 @@ contain the actual name of the package.
 A package can provide sub-components.
 Those components can be listed after the COMPONENTS (or REQUIRED)
 or OPTIONAL_COMPONENTS keywords.  The set of all listed components will be
-specified in a XXX_FIND_COMPONENTS variable.
-For each package-specific component, say Yyy, a variable XXX_FIND_REQUIRED_Yyy
+specified in a Xxx_FIND_COMPONENTS variable.
+For each package-specific component, say Yyy, a variable Xxx_FIND_REQUIRED_Yyy
 will be set to true if it listed after COMPONENTS and it will be set to false
 if it was listed after OPTIONAL_COMPONENTS.
-Using those variables a FindXXX.cmake module and also a XXXConfig.cmake package
+Using those variables a FindXxx.cmake module and also a XxxConfig.cmake package
 configuration file can determine whether and which components have been requested,
 and whether they were requested as required or as optional.
-For each of the requested components a XXX_Yyy_FOUND variable should be set
+For each of the requested components a Xxx_Yyy_FOUND variable should be set
 accordingly.
-The per-package XXX_FOUND variable should be only set to true if all requested
+The per-package Xxx_FOUND variable should be only set to true if all requested
 required components have been found. A missing optional component should not
-keep the XXX_FOUND variable from being set to true.
-If the package provides XXX_INCLUDE_DIRS and XXX_LIBRARIES variables, the include
+keep the Xxx_FOUND variable from being set to true.
+If the package provides Xxx_INCLUDE_DIRS and Xxx_LIBRARIES variables, the include
 dirs and libraries for all components which were requested and which have been
 found should be added to those two variables.