Help: Convert remaining modules to block-style comments

202 files changed, 10078 insertions, 9868 deletions

diff --git a/Modules/AddFileDependencies.cmake b/Modules/AddFileDependencies.cmake
index 999da95..4a4e645 100644
--- a/Modules/AddFileDependencies.cmake
+++ b/Modules/AddFileDependencies.cmake
@@ -1,17 +1,18 @@
 # Distributed under the OSI-approved BSD 3-Clause License.  See accompanying
 # file Copyright.txt or https://cmake.org/licensing for details.
 
-#.rst:
-# AddFileDependencies
-# -------------------
-#
-# Add dependencies to a source file.
-#
-# .. code-block:: cmake
-#
-#   ADD_FILE_DEPENDENCIES(<source> <files>)
-#
-# Adds the given ``<files>`` to the dependencies of file ``<source>``.
+#[=======================================================================[.rst:
+AddFileDependencies
+-------------------
+
+Add dependencies to a source file.
+
+.. code-block:: cmake
+
+  ADD_FILE_DEPENDENCIES(<source> <files>)
+
+Adds the given ``<files>`` to the dependencies of file ``<source>``.
+#]=======================================================================]
 
 macro(ADD_FILE_DEPENDENCIES _file)
 
diff --git a/Modules/CMakeAddFortranSubdirectory.cmake b/Modules/CMakeAddFortranSubdirectory.cmake
index 4649f35..2bb3128 100644
--- a/Modules/CMakeAddFortranSubdirectory.cmake
+++ b/Modules/CMakeAddFortranSubdirectory.cmake
@@ -1,46 +1,47 @@
 # Distributed under the OSI-approved BSD 3-Clause License.  See accompanying
 # file Copyright.txt or https://cmake.org/licensing for details.
 
-#.rst:
-# CMakeAddFortranSubdirectory
-# ---------------------------
-#
-# Use MinGW gfortran from VS if a fortran compiler is not found.
-#
-# The 'add_fortran_subdirectory' function adds a subdirectory to a
-# project that contains a fortran only sub-project.  The module will
-# check the current compiler and see if it can support fortran.  If no
-# fortran compiler is found and the compiler is MSVC, then this module
-# will find the MinGW gfortran.  It will then use an external project to
-# build with the MinGW tools.  It will also create imported targets for
-# the libraries created.  This will only work if the fortran code is
-# built into a dll, so BUILD_SHARED_LIBS is turned on in the project.
-# In addition the CMAKE_GNUtoMS option is set to on, so that the MS .lib
-# files are created.  Usage is as follows:
-#
-# ::
-#
-#   cmake_add_fortran_subdirectory(
-#    <subdir>                # name of subdirectory
-#    PROJECT <project_name>  # project name in subdir top CMakeLists.txt
-#    ARCHIVE_DIR <dir>       # dir where project places .lib files
-#    RUNTIME_DIR <dir>       # dir where project places .dll files
-#    LIBRARIES <lib>...      # names of library targets to import
-#    LINK_LIBRARIES          # link interface libraries for LIBRARIES
-#     [LINK_LIBS <lib> <dep>...]...
-#    CMAKE_COMMAND_LINE ...  # extra command line flags to pass to cmake
-#    NO_EXTERNAL_INSTALL     # skip installation of external project
-#    )
-#
-# Relative paths in ARCHIVE_DIR and RUNTIME_DIR are interpreted with
-# respect to the build directory corresponding to the source directory
-# in which the function is invoked.
-#
-# Limitations:
-#
-# NO_EXTERNAL_INSTALL is required for forward compatibility with a
-# future version that supports installation of the external project
-# binaries during "make install".
+#[=======================================================================[.rst:
+CMakeAddFortranSubdirectory
+---------------------------
+
+Use MinGW gfortran from VS if a fortran compiler is not found.
+
+The 'add_fortran_subdirectory' function adds a subdirectory to a
+project that contains a fortran only sub-project.  The module will
+check the current compiler and see if it can support fortran.  If no
+fortran compiler is found and the compiler is MSVC, then this module
+will find the MinGW gfortran.  It will then use an external project to
+build with the MinGW tools.  It will also create imported targets for
+the libraries created.  This will only work if the fortran code is
+built into a dll, so BUILD_SHARED_LIBS is turned on in the project.
+In addition the CMAKE_GNUtoMS option is set to on, so that the MS .lib
+files are created.  Usage is as follows:
+
+::
+
+  cmake_add_fortran_subdirectory(
+   <subdir>                # name of subdirectory
+   PROJECT <project_name>  # project name in subdir top CMakeLists.txt
+   ARCHIVE_DIR <dir>       # dir where project places .lib files
+   RUNTIME_DIR <dir>       # dir where project places .dll files
+   LIBRARIES <lib>...      # names of library targets to import
+   LINK_LIBRARIES          # link interface libraries for LIBRARIES
+    [LINK_LIBS <lib> <dep>...]...
+   CMAKE_COMMAND_LINE ...  # extra command line flags to pass to cmake
+   NO_EXTERNAL_INSTALL     # skip installation of external project
+   )
+
+Relative paths in ARCHIVE_DIR and RUNTIME_DIR are interpreted with
+respect to the build directory corresponding to the source directory
+in which the function is invoked.
+
+Limitations:
+
+NO_EXTERNAL_INSTALL is required for forward compatibility with a
+future version that supports installation of the external project
+binaries during "make install".
+#]=======================================================================]
 
 set(_MS_MINGW_SOURCE_DIR ${CMAKE_CURRENT_LIST_DIR})
 include(CheckLanguage)
diff --git a/Modules/CMakeBackwardCompatibilityCXX.cmake b/Modules/CMakeBackwardCompatibilityCXX.cmake
index cbd5ea7..628b541 100644
--- a/Modules/CMakeBackwardCompatibilityCXX.cmake
+++ b/Modules/CMakeBackwardCompatibilityCXX.cmake
@@ -1,20 +1,21 @@
 # Distributed under the OSI-approved BSD 3-Clause License.  See accompanying
 # file Copyright.txt or https://cmake.org/licensing for details.
 
-#.rst:
-# CMakeBackwardCompatibilityCXX
-# -----------------------------
-#
-# define a bunch of backwards compatibility variables
-#
-# ::
-#
-#   CMAKE_ANSI_CXXFLAGS - flag for ansi c++
-#   CMAKE_HAS_ANSI_STRING_STREAM - has <strstream>
-#   include(TestForANSIStreamHeaders)
-#   include(CheckIncludeFileCXX)
-#   include(TestForSTDNamespace)
-#   include(TestForANSIForScope)
+#[=======================================================================[.rst:
+CMakeBackwardCompatibilityCXX
+-----------------------------
+
+define a bunch of backwards compatibility variables
+
+::
+
+  CMAKE_ANSI_CXXFLAGS - flag for ansi c++
+  CMAKE_HAS_ANSI_STRING_STREAM - has <strstream>
+  include(TestForANSIStreamHeaders)
+  include(CheckIncludeFileCXX)
+  include(TestForSTDNamespace)
+  include(TestForANSIForScope)
+#]=======================================================================]
 
 if(NOT CMAKE_SKIP_COMPATIBILITY_TESTS)
   # check for some ANSI flags in the CXX compiler if it is not gnu
diff --git a/Modules/CMakeDependentOption.cmake b/Modules/CMakeDependentOption.cmake
index 21d3c96..6046d85 100644
--- a/Modules/CMakeDependentOption.cmake
+++ b/Modules/CMakeDependentOption.cmake
@@ -1,27 +1,28 @@
 # Distributed under the OSI-approved BSD 3-Clause License.  See accompanying
 # file Copyright.txt or https://cmake.org/licensing for details.
 
-#.rst:
-# CMakeDependentOption
-# --------------------
-#
-# Macro to provide an option dependent on other options.
-#
-# This macro presents an option to the user only if a set of other
-# conditions are true.  When the option is not presented a default value
-# is used, but any value set by the user is preserved for when the
-# option is presented again.  Example invocation:
-#
-# ::
-#
-#   CMAKE_DEPENDENT_OPTION(USE_FOO "Use Foo" ON
-#                          "USE_BAR;NOT USE_ZOT" OFF)
-#
-# If USE_BAR is true and USE_ZOT is false, this provides an option
-# called USE_FOO that defaults to ON.  Otherwise, it sets USE_FOO to
-# OFF.  If the status of USE_BAR or USE_ZOT ever changes, any value for
-# the USE_FOO option is saved so that when the option is re-enabled it
-# retains its old value.
+#[=======================================================================[.rst:
+CMakeDependentOption
+--------------------
+
+Macro to provide an option dependent on other options.
+
+This macro presents an option to the user only if a set of other
+conditions are true.  When the option is not presented a default value
+is used, but any value set by the user is preserved for when the
+option is presented again.  Example invocation:
+
+::
+
+  CMAKE_DEPENDENT_OPTION(USE_FOO "Use Foo" ON
+                         "USE_BAR;NOT USE_ZOT" OFF)
+
+If USE_BAR is true and USE_ZOT is false, this provides an option
+called USE_FOO that defaults to ON.  Otherwise, it sets USE_FOO to
+OFF.  If the status of USE_BAR or USE_ZOT ever changes, any value for
+the USE_FOO option is saved so that when the option is re-enabled it
+retains its old value.
+#]=======================================================================]
 
 macro(CMAKE_DEPENDENT_OPTION option doc default depends force)
   if(${option}_ISSET MATCHES "^${option}_ISSET$")
diff --git a/Modules/CMakeDetermineVSServicePack.cmake b/Modules/CMakeDetermineVSServicePack.cmake
index 0264621..b0911b4 100644
--- a/Modules/CMakeDetermineVSServicePack.cmake
+++ b/Modules/CMakeDetermineVSServicePack.cmake
@@ -1,35 +1,36 @@
 # Distributed under the OSI-approved BSD 3-Clause License.  See accompanying
 # file Copyright.txt or https://cmake.org/licensing for details.
 
-#.rst:
-# CMakeDetermineVSServicePack
-# ---------------------------
-#
-# Deprecated.  Do not use.
-#
-# The functionality of this module has been superseded by the
-# :variable:`CMAKE_<LANG>_COMPILER_VERSION` variable that contains
-# the compiler version number.
-#
-# Determine the Visual Studio service pack of the 'cl' in use.
-#
-# Usage::
-#
-#   if(MSVC)
-#     include(CMakeDetermineVSServicePack)
-#     DetermineVSServicePack( my_service_pack )
-#     if( my_service_pack )
-#       message(STATUS "Detected: ${my_service_pack}")
-#     endif()
-#   endif()
-#
-# Function DetermineVSServicePack sets the given variable to one of the
-# following values or an empty string if unknown::
-#
-#   vc80, vc80sp1
-#   vc90, vc90sp1
-#   vc100, vc100sp1
-#   vc110, vc110sp1, vc110sp2, vc110sp3, vc110sp4
+#[=======================================================================[.rst:
+CMakeDetermineVSServicePack
+---------------------------
+
+Deprecated.  Do not use.
+
+The functionality of this module has been superseded by the
+:variable:`CMAKE_<LANG>_COMPILER_VERSION` variable that contains
+the compiler version number.
+
+Determine the Visual Studio service pack of the 'cl' in use.
+
+Usage::
+
+  if(MSVC)
+    include(CMakeDetermineVSServicePack)
+    DetermineVSServicePack( my_service_pack )
+    if( my_service_pack )
+      message(STATUS "Detected: ${my_service_pack}")
+    endif()
+  endif()
+
+Function DetermineVSServicePack sets the given variable to one of the
+following values or an empty string if unknown::
+
+  vc80, vc80sp1
+  vc90, vc90sp1
+  vc100, vc100sp1
+  vc110, vc110sp1, vc110sp2, vc110sp3, vc110sp4
+#]=======================================================================]
 
 if(NOT CMAKE_MINIMUM_REQUIRED_VERSION VERSION_LESS 2.8.8)
   message(DEPRECATION
diff --git a/Modules/CMakeExpandImportedTargets.cmake b/Modules/CMakeExpandImportedTargets.cmake
index 21a3065..4b97c37 100644
--- a/Modules/CMakeExpandImportedTargets.cmake
+++ b/Modules/CMakeExpandImportedTargets.cmake
@@ -1,41 +1,42 @@
 # Distributed under the OSI-approved BSD 3-Clause License.  See accompanying
 # file Copyright.txt or https://cmake.org/licensing for details.
 
-#.rst:
-# CMakeExpandImportedTargets
-# --------------------------
-#
-# Deprecated.  Do not use.
-#
-# This module was once needed to expand imported targets to the underlying
-# libraries they reference on disk for use with the :command:`try_compile`
-# and :command:`try_run` commands.  These commands now support imported
-# libraries in their ``LINK_LIBRARIES`` options (since CMake 2.8.11
-# for :command:`try_compile` and since CMake 3.2 for :command:`try_run`).
-#
-# This module does not support the policy :policy:`CMP0022` ``NEW``
-# behavior or use of the :prop_tgt:`INTERFACE_LINK_LIBRARIES` property
-# because :manual:`generator expressions <cmake-generator-expressions(7)>`
-# cannot be evaluated during configuration.
-#
-# ::
-#
-#  CMAKE_EXPAND_IMPORTED_TARGETS(<var> LIBRARIES lib1 lib2...libN
-#                                [CONFIGURATION <config>])
-#
-# CMAKE_EXPAND_IMPORTED_TARGETS() takes a list of libraries and replaces
-# all imported targets contained in this list with their actual file
-# paths of the referenced libraries on disk, including the libraries
-# from their link interfaces.  If a CONFIGURATION is given, it uses the
-# respective configuration of the imported targets if it exists.  If no
-# CONFIGURATION is given, it uses the first configuration from
-# ${CMAKE_CONFIGURATION_TYPES} if set, otherwise ${CMAKE_BUILD_TYPE}.
-#
-# ::
-#
-#     cmake_expand_imported_targets(expandedLibs
-#       LIBRARIES ${CMAKE_REQUIRED_LIBRARIES}
-#       CONFIGURATION "${CMAKE_TRY_COMPILE_CONFIGURATION}" )
+#[=======================================================================[.rst:
+CMakeExpandImportedTargets
+--------------------------
+
+Deprecated.  Do not use.
+
+This module was once needed to expand imported targets to the underlying
+libraries they reference on disk for use with the :command:`try_compile`
+and :command:`try_run` commands.  These commands now support imported
+libraries in their ``LINK_LIBRARIES`` options (since CMake 2.8.11
+for :command:`try_compile` and since CMake 3.2 for :command:`try_run`).
+
+This module does not support the policy :policy:`CMP0022` ``NEW``
+behavior or use of the :prop_tgt:`INTERFACE_LINK_LIBRARIES` property
+because :manual:`generator expressions <cmake-generator-expressions(7)>`
+cannot be evaluated during configuration.
+
+::
+
+ CMAKE_EXPAND_IMPORTED_TARGETS(<var> LIBRARIES lib1 lib2...libN
+                               [CONFIGURATION <config>])
+
+CMAKE_EXPAND_IMPORTED_TARGETS() takes a list of libraries and replaces
+all imported targets contained in this list with their actual file
+paths of the referenced libraries on disk, including the libraries
+from their link interfaces.  If a CONFIGURATION is given, it uses the
+respective configuration of the imported targets if it exists.  If no
+CONFIGURATION is given, it uses the first configuration from
+${CMAKE_CONFIGURATION_TYPES} if set, otherwise ${CMAKE_BUILD_TYPE}.
+
+::
+
+    cmake_expand_imported_targets(expandedLibs
+      LIBRARIES ${CMAKE_REQUIRED_LIBRARIES}
+      CONFIGURATION "${CMAKE_TRY_COMPILE_CONFIGURATION}" )
+#]=======================================================================]
 
 function(CMAKE_EXPAND_IMPORTED_TARGETS _RESULT )
 
diff --git a/Modules/CMakeFindFrameworks.cmake b/Modules/CMakeFindFrameworks.cmake
index 6c4c527..06c05fb 100644
--- a/Modules/CMakeFindFrameworks.cmake
+++ b/Modules/CMakeFindFrameworks.cmake
@@ -1,15 +1,16 @@
 # Distributed under the OSI-approved BSD 3-Clause License.  See accompanying
 # file Copyright.txt or https://cmake.org/licensing for details.
 
-#.rst:
-# CMakeFindFrameworks
-# -------------------
-#
-# helper module to find OSX frameworks
-#
-# This module reads hints about search locations from variables::
-#
-#   CMAKE_FIND_FRAMEWORK_EXTRA_LOCATIONS - Extra directories
+#[=======================================================================[.rst:
+CMakeFindFrameworks
+-------------------
+
+helper module to find OSX frameworks
+
+This module reads hints about search locations from variables::
+
+  CMAKE_FIND_FRAMEWORK_EXTRA_LOCATIONS - Extra directories
+#]=======================================================================]
 
 if(NOT CMAKE_FIND_FRAMEWORKS_INCLUDED)
   set(CMAKE_FIND_FRAMEWORKS_INCLUDED 1)
diff --git a/Modules/CMakeFindPackageMode.cmake b/Modules/CMakeFindPackageMode.cmake
index ec3652c..815dfc9 100644
--- a/Modules/CMakeFindPackageMode.cmake
+++ b/Modules/CMakeFindPackageMode.cmake
@@ -1,33 +1,34 @@
 # Distributed under the OSI-approved BSD 3-Clause License.  See accompanying
 # file Copyright.txt or https://cmake.org/licensing for details.
 
-#.rst:
-# CMakeFindPackageMode
-# --------------------
-#
-#
-#
-# This file is executed by cmake when invoked with --find-package.  It
-# expects that the following variables are set using -D:
-#
-# ``NAME``
-#   name of the package
-# ``COMPILER_ID``
-#   the CMake compiler ID for which the result is,
-#   i.e. GNU/Intel/Clang/MSVC, etc.
-# ``LANGUAGE``
-#   language for which the result will be used,
-#   i.e. C/CXX/Fortran/ASM
-# ``MODE``
-#   ``EXIST``
-#     only check for existence of the given package
-#   ``COMPILE``
-#     print the flags needed for compiling an object file which uses
-#     the given package
-#   ``LINK``
-#     print the flags needed for linking when using the given package
-# ``QUIET``
-#   if TRUE, don't print anything
+#[=======================================================================[.rst:
+CMakeFindPackageMode
+--------------------
+
+
+
+This file is executed by cmake when invoked with --find-package.  It
+expects that the following variables are set using -D:
+
+``NAME``
+  name of the package
+``COMPILER_ID``
+  the CMake compiler ID for which the result is,
+  i.e. GNU/Intel/Clang/MSVC, etc.
+``LANGUAGE``
+  language for which the result will be used,
+  i.e. C/CXX/Fortran/ASM
+``MODE``
+  ``EXIST``
+    only check for existence of the given package
+  ``COMPILE``
+    print the flags needed for compiling an object file which uses
+    the given package
+  ``LINK``
+    print the flags needed for linking when using the given package
+``QUIET``
+  if TRUE, don't print anything
+#]=======================================================================]
 
 if(NOT NAME)
   message(FATAL_ERROR "Name of the package to be searched not specified. Set the CMake variable NAME, e.g. -DNAME=JPEG .")
diff --git a/Modules/CMakeForceCompiler.cmake b/Modules/CMakeForceCompiler.cmake
index 1bc80fd..ec17c2e 100644
--- a/Modules/CMakeForceCompiler.cmake
+++ b/Modules/CMakeForceCompiler.cmake
@@ -1,69 +1,70 @@
 # Distributed under the OSI-approved BSD 3-Clause License.  See accompanying
 # file Copyright.txt or https://cmake.org/licensing for details.
 
-#.rst:
-# CMakeForceCompiler
-# ------------------
-#
-# Deprecated.  Do not use.
-#
-# The macros provided by this module were once intended for use by
-# cross-compiling toolchain files when CMake was not able to automatically
-# detect the compiler identification.  Since the introduction of this module,
-# CMake's compiler identification capabilities have improved and can now be
-# taught to recognize any compiler.  Furthermore, the suite of information
-# CMake detects from a compiler is now too extensive to be provided by
-# toolchain files using these macros.
-#
-# One common use case for this module was to skip CMake's checks for a
-# working compiler when using a cross-compiler that cannot link binaries
-# without special flags or custom linker scripts.  This case is now supported
-# by setting the :variable:`CMAKE_TRY_COMPILE_TARGET_TYPE` variable in the
-# toolchain file instead.
-#
-# -------------------------------------------------------------------------
-#
-# Macro CMAKE_FORCE_C_COMPILER has the following signature:
-#
-# ::
-#
-#    CMAKE_FORCE_C_COMPILER(<compiler> <compiler-id>)
-#
-# It sets CMAKE_C_COMPILER to the given compiler and the cmake internal
-# variable CMAKE_C_COMPILER_ID to the given compiler-id.  It also
-# bypasses the check for working compiler and basic compiler information
-# tests.
-#
-# Macro CMAKE_FORCE_CXX_COMPILER has the following signature:
-#
-# ::
-#
-#    CMAKE_FORCE_CXX_COMPILER(<compiler> <compiler-id>)
-#
-# It sets CMAKE_CXX_COMPILER to the given compiler and the cmake
-# internal variable CMAKE_CXX_COMPILER_ID to the given compiler-id.  It
-# also bypasses the check for working compiler and basic compiler
-# information tests.
-#
-# Macro CMAKE_FORCE_Fortran_COMPILER has the following signature:
-#
-# ::
-#
-#    CMAKE_FORCE_Fortran_COMPILER(<compiler> <compiler-id>)
-#
-# It sets CMAKE_Fortran_COMPILER to the given compiler and the cmake
-# internal variable CMAKE_Fortran_COMPILER_ID to the given compiler-id.
-# It also bypasses the check for working compiler and basic compiler
-# information tests.
-#
-# So a simple toolchain file could look like this:
-#
-# ::
-#
-#    include (CMakeForceCompiler)
-#    set(CMAKE_SYSTEM_NAME Generic)
-#    CMAKE_FORCE_C_COMPILER   (chc12 MetrowerksHicross)
-#    CMAKE_FORCE_CXX_COMPILER (chc12 MetrowerksHicross)
+#[=======================================================================[.rst:
+CMakeForceCompiler
+------------------
+
+Deprecated.  Do not use.
+
+The macros provided by this module were once intended for use by
+cross-compiling toolchain files when CMake was not able to automatically
+detect the compiler identification.  Since the introduction of this module,
+CMake's compiler identification capabilities have improved and can now be
+taught to recognize any compiler.  Furthermore, the suite of information
+CMake detects from a compiler is now too extensive to be provided by
+toolchain files using these macros.
+
+One common use case for this module was to skip CMake's checks for a
+working compiler when using a cross-compiler that cannot link binaries
+without special flags or custom linker scripts.  This case is now supported
+by setting the :variable:`CMAKE_TRY_COMPILE_TARGET_TYPE` variable in the
+toolchain file instead.
+
+-------------------------------------------------------------------------
+
+Macro CMAKE_FORCE_C_COMPILER has the following signature:
+
+::
+
+   CMAKE_FORCE_C_COMPILER(<compiler> <compiler-id>)
+
+It sets CMAKE_C_COMPILER to the given compiler and the cmake internal
+variable CMAKE_C_COMPILER_ID to the given compiler-id.  It also
+bypasses the check for working compiler and basic compiler information
+tests.
+
+Macro CMAKE_FORCE_CXX_COMPILER has the following signature:
+
+::
+
+   CMAKE_FORCE_CXX_COMPILER(<compiler> <compiler-id>)
+
+It sets CMAKE_CXX_COMPILER to the given compiler and the cmake
+internal variable CMAKE_CXX_COMPILER_ID to the given compiler-id.  It
+also bypasses the check for working compiler and basic compiler
+information tests.
+
+Macro CMAKE_FORCE_Fortran_COMPILER has the following signature:
+
+::
+
+   CMAKE_FORCE_Fortran_COMPILER(<compiler> <compiler-id>)
+
+It sets CMAKE_Fortran_COMPILER to the given compiler and the cmake
+internal variable CMAKE_Fortran_COMPILER_ID to the given compiler-id.
+It also bypasses the check for working compiler and basic compiler
+information tests.
+
+So a simple toolchain file could look like this:
+
+::
+
+   include (CMakeForceCompiler)
+   set(CMAKE_SYSTEM_NAME Generic)
+   CMAKE_FORCE_C_COMPILER   (chc12 MetrowerksHicross)
+   CMAKE_FORCE_CXX_COMPILER (chc12 MetrowerksHicross)
+#]=======================================================================]
 
 macro(CMAKE_FORCE_C_COMPILER compiler id)
   message(DEPRECATION "The CMAKE_FORCE_C_COMPILER macro is deprecated.  "
diff --git a/Modules/CMakeGraphVizOptions.cmake b/Modules/CMakeGraphVizOptions.cmake
index 0d7f1d9..1911e73 100644
--- a/Modules/CMakeGraphVizOptions.cmake
+++ b/Modules/CMakeGraphVizOptions.cmake
@@ -1,122 +1,123 @@
 # Distributed under the OSI-approved BSD 3-Clause License.  See accompanying
 # file Copyright.txt or https://cmake.org/licensing for details.
 
-#.rst:
-# CMakeGraphVizOptions
-# --------------------
-#
-# The builtin graphviz support of CMake.
-#
-# Variables specific to the graphviz support
-# ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
-#
-# CMake
-# can generate `graphviz <http://www.graphviz.org/>`_ files, showing the dependencies between the
-# targets in a project and also external libraries which are linked
-# against.  When CMake is run with the ``--graphviz=foo.dot`` option, it will
-# produce:
-#
-# * a ``foo.dot`` file showing all dependencies in the project
-# * a ``foo.dot.<target>`` file for each target, file showing on which other targets the respective target depends
-# * a ``foo.dot.<target>.dependers`` file, showing which other targets depend on the respective target
-#
-# The different dependency types ``PUBLIC``, ``PRIVATE`` and ``INTERFACE``
-# are represented as solid, dashed and dotted edges.
-#
-# This can result in huge graphs.  Using the file
-# ``CMakeGraphVizOptions.cmake`` the look and content of the generated
-# graphs can be influenced.  This file is searched first in
-# :variable:`CMAKE_BINARY_DIR` and then in :variable:`CMAKE_SOURCE_DIR`.  If found, it is
-# read and the variables set in it are used to adjust options for the
-# generated graphviz files.
-#
-# .. variable:: GRAPHVIZ_GRAPH_TYPE
-#
-#  The graph type.
-#
-#  * Mandatory : NO
-#  * Default   : "digraph"
-#
-#  Valid graph types are:
-#
-#  * "graph" : Nodes are joined with lines
-#  * "digraph" : Nodes are joined with arrows showing direction
-#  * "strict graph" : Like "graph" but max one line between each node
-#  * "strict digraph" : Like "graph" but max one line between each node in each direction
-#
-# .. variable:: GRAPHVIZ_GRAPH_NAME
-#
-#  The graph name.
-#
-#  * Mandatory : NO
-#  * Default   : "GG"
-#
-# .. variable:: GRAPHVIZ_GRAPH_HEADER
-#
-#  The header written at the top of the graphviz file.
-#
-#  * Mandatory : NO
-#  * Default   : "node [n  fontsize = "12"];"
-#
-# .. variable:: GRAPHVIZ_NODE_PREFIX
-#
-#  The prefix for each node in the graphviz file.
-#
-#  * Mandatory : NO
-#  * Default   : "node"
-#
-# .. variable:: GRAPHVIZ_EXECUTABLES
-#
-#  Set this to FALSE to exclude executables from the generated graphs.
-#
-#  * Mandatory : NO
-#  * Default   : TRUE
-#
-# .. variable:: GRAPHVIZ_STATIC_LIBS
-#
-#  Set this to FALSE to exclude static libraries from the generated graphs.
-#
-#  * Mandatory : NO
-#  * Default   : TRUE
-#
-# .. variable:: GRAPHVIZ_SHARED_LIBS
-#
-#  Set this to FALSE to exclude shared libraries from the generated graphs.
-#
-#  * Mandatory : NO
-#  * Default   : TRUE
-#
-# .. variable:: GRAPHVIZ_MODULE_LIBS
-#
-#  Set this to FALSE to exclude module libraries from the generated graphs.
-#
-#  * Mandatory : NO
-#  * Default   : TRUE
-#
-# .. variable:: GRAPHVIZ_EXTERNAL_LIBS
-#
-#  Set this to FALSE to exclude external libraries from the generated graphs.
-#
-#  * Mandatory : NO
-#  * Default   : TRUE
-#
-# .. variable:: GRAPHVIZ_IGNORE_TARGETS
-#
-#  A list of regular expressions for ignoring targets.
-#
-#  * Mandatory : NO
-#  * Default   : empty
-#
-# .. variable:: GRAPHVIZ_GENERATE_PER_TARGET
-#
-#  Set this to FALSE to exclude per target graphs ``foo.dot.<target>``.
-#
-#  * Mandatory : NO
-#  * Default   : TRUE
-#
-# .. variable:: GRAPHVIZ_GENERATE_DEPENDERS
-#
-#  Set this to FALSE to exclude depender graphs ``foo.dot.<target>.dependers``.
-#
-#  * Mandatory : NO
-#  * Default   : TRUE
+#[=======================================================================[.rst:
+CMakeGraphVizOptions
+--------------------
+
+The builtin graphviz support of CMake.
+
+Variables specific to the graphviz support
+^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
+
+CMake
+can generate `graphviz <http://www.graphviz.org/>`_ files, showing the dependencies between the
+targets in a project and also external libraries which are linked
+against.  When CMake is run with the ``--graphviz=foo.dot`` option, it will
+produce:
+
+* a ``foo.dot`` file showing all dependencies in the project
+* a ``foo.dot.<target>`` file for each target, file showing on which other targets the respective target depends
+* a ``foo.dot.<target>.dependers`` file, showing which other targets depend on the respective target
+
+The different dependency types ``PUBLIC``, ``PRIVATE`` and ``INTERFACE``
+are represented as solid, dashed and dotted edges.
+
+This can result in huge graphs.  Using the file
+``CMakeGraphVizOptions.cmake`` the look and content of the generated
+graphs can be influenced.  This file is searched first in
+:variable:`CMAKE_BINARY_DIR` and then in :variable:`CMAKE_SOURCE_DIR`.  If found, it is
+read and the variables set in it are used to adjust options for the
+generated graphviz files.
+
+.. variable:: GRAPHVIZ_GRAPH_TYPE
+
+ The graph type.
+
+ * Mandatory : NO
+ * Default   : "digraph"
+
+ Valid graph types are:
+
+ * "graph" : Nodes are joined with lines
+ * "digraph" : Nodes are joined with arrows showing direction
+ * "strict graph" : Like "graph" but max one line between each node
+ * "strict digraph" : Like "graph" but max one line between each node in each direction
+
+.. variable:: GRAPHVIZ_GRAPH_NAME
+
+ The graph name.
+
+ * Mandatory : NO
+ * Default   : "GG"
+
+.. variable:: GRAPHVIZ_GRAPH_HEADER
+
+ The header written at the top of the graphviz file.
+
+ * Mandatory : NO
+ * Default   : "node [n  fontsize = "12"];"
+
+.. variable:: GRAPHVIZ_NODE_PREFIX
+
+ The prefix for each node in the graphviz file.
+
+ * Mandatory : NO
+ * Default   : "node"
+
+.. variable:: GRAPHVIZ_EXECUTABLES
+
+ Set this to FALSE to exclude executables from the generated graphs.
+
+ * Mandatory : NO
+ * Default   : TRUE
+
+.. variable:: GRAPHVIZ_STATIC_LIBS
+
+ Set this to FALSE to exclude static libraries from the generated graphs.
+
+ * Mandatory : NO
+ * Default   : TRUE
+
+.. variable:: GRAPHVIZ_SHARED_LIBS
+
+ Set this to FALSE to exclude shared libraries from the generated graphs.
+
+ * Mandatory : NO
+ * Default   : TRUE
+
+.. variable:: GRAPHVIZ_MODULE_LIBS
+
+ Set this to FALSE to exclude module libraries from the generated graphs.
+
+ * Mandatory : NO
+ * Default   : TRUE
+
+.. variable:: GRAPHVIZ_EXTERNAL_LIBS
+
+ Set this to FALSE to exclude external libraries from the generated graphs.
+
+ * Mandatory : NO
+ * Default   : TRUE
+
+.. variable:: GRAPHVIZ_IGNORE_TARGETS
+
+ A list of regular expressions for ignoring targets.
+
+ * Mandatory : NO
+ * Default   : empty
+
+.. variable:: GRAPHVIZ_GENERATE_PER_TARGET
+
+ Set this to FALSE to exclude per target graphs ``foo.dot.<target>``.
+
+ * Mandatory : NO
+ * Default   : TRUE
+
+.. variable:: GRAPHVIZ_GENERATE_DEPENDERS
+
+ Set this to FALSE to exclude depender graphs ``foo.dot.<target>.dependers``.
+
+ * Mandatory : NO
+ * Default   : TRUE
+#]=======================================================================]
diff --git a/Modules/CMakePackageConfigHelpers.cmake b/Modules/CMakePackageConfigHelpers.cmake
index d5301d7..bcc9bf8 100644
--- a/Modules/CMakePackageConfigHelpers.cmake
+++ b/Modules/CMakePackageConfigHelpers.cmake
@@ -1,209 +1,210 @@
 # Distributed under the OSI-approved BSD 3-Clause License.  See accompanying
 # file Copyright.txt or https://cmake.org/licensing for details.
 
-#.rst:
-# CMakePackageConfigHelpers
-# -------------------------
-#
-# Helpers functions for creating config files that can be included by other
-# projects to find and use a package.
-#
-# Adds the :command:`configure_package_config_file()` and
-# :command:`write_basic_package_version_file()` commands.
-#
-# Generating a Package Configuration File
-# ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
-#
-# .. command:: configure_package_config_file
-#
-#  Create a config file for a project::
-#
-#    configure_package_config_file(<input> <output>
-#      INSTALL_DESTINATION <path>
-#      [PATH_VARS <var1> <var2> ... <varN>]
-#      [NO_SET_AND_CHECK_MACRO]
-#      [NO_CHECK_REQUIRED_COMPONENTS_MACRO]
-#      [INSTALL_PREFIX <path>]
-#      )
-#
-# ``configure_package_config_file()`` should be used instead of the plain
-# :command:`configure_file()` command when creating the ``<PackageName>Config.cmake``
-# or ``<PackageName>-config.cmake`` file for installing a project or library.
-# It helps making the resulting package relocatable by avoiding hardcoded paths
-# in the installed ``Config.cmake`` file.
-#
-# In a ``FooConfig.cmake`` file there may be code like this to make the install
-# destinations know to the using project:
-#
-# .. code-block:: cmake
-#
-#    set(FOO_INCLUDE_DIR   "@CMAKE_INSTALL_FULL_INCLUDEDIR@" )
-#    set(FOO_DATA_DIR   "@CMAKE_INSTALL_PREFIX@/@RELATIVE_DATA_INSTALL_DIR@" )
-#    set(FOO_ICONS_DIR   "@CMAKE_INSTALL_PREFIX@/share/icons" )
-#    #...logic to determine installedPrefix from the own location...
-#    set(FOO_CONFIG_DIR  "${installedPrefix}/@CONFIG_INSTALL_DIR@" )
-#
-# All 4 options shown above are not sufficient, since the first 3 hardcode the
-# absolute directory locations, and the 4th case works only if the logic to
-# determine the ``installedPrefix`` is correct, and if ``CONFIG_INSTALL_DIR``
-# contains a relative path, which in general cannot be guaranteed.  This has the
-# effect that the resulting ``FooConfig.cmake`` file would work poorly under
-# Windows and OSX, where users are used to choose the install location of a
-# binary package at install time, independent from how
-# :variable:`CMAKE_INSTALL_PREFIX` was set at build/cmake time.
-#
-# Using ``configure_package_config_file`` helps.  If used correctly, it makes
-# the resulting ``FooConfig.cmake`` file relocatable.  Usage:
-#
-# 1. write a ``FooConfig.cmake.in`` file as you are used to
-# 2. insert a line containing only the string ``@PACKAGE_INIT@``
-# 3. instead of ``set(FOO_DIR "@SOME_INSTALL_DIR@")``, use
-#    ``set(FOO_DIR "@PACKAGE_SOME_INSTALL_DIR@")`` (this must be after the
-#    ``@PACKAGE_INIT@`` line)
-# 4. instead of using the normal :command:`configure_file()`, use
-#    ``configure_package_config_file()``
-#
-#
-#
-# The ``<input>`` and ``<output>`` arguments are the input and output file, the
-# same way as in :command:`configure_file()`.
-#
-# The ``<path>`` given to ``INSTALL_DESTINATION`` must be the destination where
-# the ``FooConfig.cmake`` file will be installed to.  This path can either be
-# absolute, or relative to the ``INSTALL_PREFIX`` path.
-#
-# The variables ``<var1>`` to ``<varN>`` given as ``PATH_VARS`` are the
-# variables which contain install destinations.  For each of them the macro will
-# create a helper variable ``PACKAGE_<var...>``.  These helper variables must be
-# used in the ``FooConfig.cmake.in`` file for setting the installed location.
-# They are calculated by ``configure_package_config_file`` so that they are
-# always relative to the installed location of the package.  This works both for
-# relative and also for absolute locations.  For absolute locations it works
-# only if the absolute location is a subdirectory of ``INSTALL_PREFIX``.
-#
-# If the ``INSTALL_PREFIX`` argument is passed, this is used as base path to
-# calculate all the relative paths.  The ``<path>`` argument must be an absolute
-# path.  If this argument is not passed, the :variable:`CMAKE_INSTALL_PREFIX`
-# variable will be used instead.  The default value is good when generating a
-# FooConfig.cmake file to use your package from the install tree.  When
-# generating a FooConfig.cmake file to use your package from the build tree this
-# option should be used.
-#
-# By default ``configure_package_config_file`` also generates two helper macros,
-# ``set_and_check()`` and ``check_required_components()`` into the
-# ``FooConfig.cmake`` file.
-#
-# ``set_and_check()`` should be used instead of the normal ``set()`` command for
-# setting directories and file locations.  Additionally to setting the variable
-# it also checks that the referenced file or directory actually exists and fails
-# with a ``FATAL_ERROR`` otherwise.  This makes sure that the created
-# ``FooConfig.cmake`` file does not contain wrong references.
-# When using the ``NO_SET_AND_CHECK_MACRO``, this macro is not generated
-# into the ``FooConfig.cmake`` file.
-#
-# ``check_required_components(<PackageName>)`` should be called at the end of
-# the ``FooConfig.cmake`` file. This macro checks whether all requested,
-# non-optional components have been found, and if this is not the case, sets
-# the ``Foo_FOUND`` variable to ``FALSE``, so that the package is considered to
-# be not found.  It does that by testing the ``Foo_<Component>_FOUND``
-# variables for all requested required components.  This macro should be
-# called even if the package doesn't provide any components to make sure
-# users are not specifying components erroneously.  When using the
-# ``NO_CHECK_REQUIRED_COMPONENTS_MACRO`` option, this macro is not generated
-# into the ``FooConfig.cmake`` file.
-#
-# For an example see below the documentation for
-# :command:`write_basic_package_version_file()`.
-#
-# Generating a Package Version File
-# ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
-#
-# .. command:: write_basic_package_version_file
-#
-#  Create a version file for a project::
-#
-#    write_basic_package_version_file(<filename>
-#      [VERSION <major.minor.patch>]
-#      COMPATIBILITY <AnyNewerVersion|SameMajorVersion|SameMinorVersion|ExactVersion> )
-#
-#
-# Writes a file for use as ``<PackageName>ConfigVersion.cmake`` file to
-# ``<filename>``.  See the documentation of :command:`find_package()` for
-# details on this.
-#
-# ``<filename>`` is the output filename, it should be in the build tree.
-# ``<major.minor.patch>`` is the version number of the project to be installed.
-#
-# If no ``VERSION`` is given, the :variable:`PROJECT_VERSION` variable is used.
-# If this hasn't been set, it errors out.
-#
-# The ``COMPATIBILITY`` mode ``AnyNewerVersion`` means that the installed
-# package version will be considered compatible if it is newer or exactly the
-# same as the requested version.  This mode should be used for packages which
-# are fully backward compatible, also across major versions.
-# If ``SameMajorVersion`` is used instead, then the behaviour differs from
-# ``AnyNewerVersion`` in that the major version number must be the same as
-# requested, e.g.  version 2.0 will not be considered compatible if 1.0 is
-# requested.  This mode should be used for packages which guarantee backward
-# compatibility within the same major version.
-# If ``SameMinorVersion`` is used, the behaviour is the same as
-# ``SameMajorVersion``, but both major and minor version must be the same as
-# requested, e.g version 0.2 will not be compatible if 0.1 is requested.
-# If ``ExactVersion`` is used, then the package is only considered compatible if
-# the requested version matches exactly its own version number (not considering
-# the tweak version).  For example, version 1.2.3 of a package is only
-# considered compatible to requested version 1.2.3.  This mode is for packages
-# without compatibility guarantees.
-# If your project has more elaborated version matching rules, you will need to
-# write your own custom ``ConfigVersion.cmake`` file instead of using this
-# macro.
-#
-# Internally, this macro executes :command:`configure_file()` to create the
-# resulting version file.  Depending on the ``COMPATIBILITY``, the corresponding
-# ``BasicConfigVersion-<COMPATIBILITY>.cmake.in`` file is used.
-# Please note that these files are internal to CMake and you should not call
-# :command:`configure_file()` on them yourself, but they can be used as starting
-# point to create more sophisticted custom ``ConfigVersion.cmake`` files.
-#
-# Example Generating Package Files
-# ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
-#
-# Example using both :command:`configure_package_config_file` and
-# ``write_basic_package_version_file()``:
-#
-# ``CMakeLists.txt``:
-#
-# .. code-block:: cmake
-#
-#    set(INCLUDE_INSTALL_DIR include/ ... CACHE )
-#    set(LIB_INSTALL_DIR lib/ ... CACHE )
-#    set(SYSCONFIG_INSTALL_DIR etc/foo/ ... CACHE )
-#    #...
-#    include(CMakePackageConfigHelpers)
-#    configure_package_config_file(FooConfig.cmake.in
-#      ${CMAKE_CURRENT_BINARY_DIR}/FooConfig.cmake
-#      INSTALL_DESTINATION ${LIB_INSTALL_DIR}/Foo/cmake
-#      PATH_VARS INCLUDE_INSTALL_DIR SYSCONFIG_INSTALL_DIR)
-#    write_basic_package_version_file(
-#      ${CMAKE_CURRENT_BINARY_DIR}/FooConfigVersion.cmake
-#      VERSION 1.2.3
-#      COMPATIBILITY SameMajorVersion )
-#    install(FILES ${CMAKE_CURRENT_BINARY_DIR}/FooConfig.cmake
-#                  ${CMAKE_CURRENT_BINARY_DIR}/FooConfigVersion.cmake
-#            DESTINATION ${LIB_INSTALL_DIR}/Foo/cmake )
-#
-# ``FooConfig.cmake.in``:
-#
-# ::
-#
-#    set(FOO_VERSION x.y.z)
-#    ...
-#    @PACKAGE_INIT@
-#    ...
-#    set_and_check(FOO_INCLUDE_DIR "@PACKAGE_INCLUDE_INSTALL_DIR@")
-#    set_and_check(FOO_SYSCONFIG_DIR "@PACKAGE_SYSCONFIG_INSTALL_DIR@")
-#
-#    check_required_components(Foo)
+#[=======================================================================[.rst:
+CMakePackageConfigHelpers
+-------------------------
+
+Helpers functions for creating config files that can be included by other
+projects to find and use a package.
+
+Adds the :command:`configure_package_config_file()` and
+:command:`write_basic_package_version_file()` commands.
+
+Generating a Package Configuration File
+^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
+
+.. command:: configure_package_config_file
+
+ Create a config file for a project::
+
+   configure_package_config_file(<input> <output>
+     INSTALL_DESTINATION <path>
+     [PATH_VARS <var1> <var2> ... <varN>]
+     [NO_SET_AND_CHECK_MACRO]
+     [NO_CHECK_REQUIRED_COMPONENTS_MACRO]
+     [INSTALL_PREFIX <path>]
+     )
+
+``configure_package_config_file()`` should be used instead of the plain
+:command:`configure_file()` command when creating the ``<PackageName>Config.cmake``
+or ``<PackageName>-config.cmake`` file for installing a project or library.
+It helps making the resulting package relocatable by avoiding hardcoded paths
+in the installed ``Config.cmake`` file.
+
+In a ``FooConfig.cmake`` file there may be code like this to make the install
+destinations know to the using project:
+
+.. code-block:: cmake
+
+   set(FOO_INCLUDE_DIR   "@CMAKE_INSTALL_FULL_INCLUDEDIR@" )
+   set(FOO_DATA_DIR   "@CMAKE_INSTALL_PREFIX@/@RELATIVE_DATA_INSTALL_DIR@" )
+   set(FOO_ICONS_DIR   "@CMAKE_INSTALL_PREFIX@/share/icons" )
+   #...logic to determine installedPrefix from the own location...
+   set(FOO_CONFIG_DIR  "${installedPrefix}/@CONFIG_INSTALL_DIR@" )
+
+All 4 options shown above are not sufficient, since the first 3 hardcode the
+absolute directory locations, and the 4th case works only if the logic to
+determine the ``installedPrefix`` is correct, and if ``CONFIG_INSTALL_DIR``
+contains a relative path, which in general cannot be guaranteed.  This has the
+effect that the resulting ``FooConfig.cmake`` file would work poorly under
+Windows and OSX, where users are used to choose the install location of a
+binary package at install time, independent from how
+:variable:`CMAKE_INSTALL_PREFIX` was set at build/cmake time.
+
+Using ``configure_package_config_file`` helps.  If used correctly, it makes
+the resulting ``FooConfig.cmake`` file relocatable.  Usage:
+
+1. write a ``FooConfig.cmake.in`` file as you are used to
+2. insert a line containing only the string ``@PACKAGE_INIT@``
+3. instead of ``set(FOO_DIR "@SOME_INSTALL_DIR@")``, use
+   ``set(FOO_DIR "@PACKAGE_SOME_INSTALL_DIR@")`` (this must be after the
+   ``@PACKAGE_INIT@`` line)
+4. instead of using the normal :command:`configure_file()`, use
+   ``configure_package_config_file()``
+
+
+
+The ``<input>`` and ``<output>`` arguments are the input and output file, the
+same way as in :command:`configure_file()`.
+
+The ``<path>`` given to ``INSTALL_DESTINATION`` must be the destination where
+the ``FooConfig.cmake`` file will be installed to.  This path can either be
+absolute, or relative to the ``INSTALL_PREFIX`` path.
+
+The variables ``<var1>`` to ``<varN>`` given as ``PATH_VARS`` are the
+variables which contain install destinations.  For each of them the macro will
+create a helper variable ``PACKAGE_<var...>``.  These helper variables must be
+used in the ``FooConfig.cmake.in`` file for setting the installed location.
+They are calculated by ``configure_package_config_file`` so that they are
+always relative to the installed location of the package.  This works both for
+relative and also for absolute locations.  For absolute locations it works
+only if the absolute location is a subdirectory of ``INSTALL_PREFIX``.
+
+If the ``INSTALL_PREFIX`` argument is passed, this is used as base path to
+calculate all the relative paths.  The ``<path>`` argument must be an absolute
+path.  If this argument is not passed, the :variable:`CMAKE_INSTALL_PREFIX`
+variable will be used instead.  The default value is good when generating a
+FooConfig.cmake file to use your package from the install tree.  When
+generating a FooConfig.cmake file to use your package from the build tree this
+option should be used.
+
+By default ``configure_package_config_file`` also generates two helper macros,
+``set_and_check()`` and ``check_required_components()`` into the
+``FooConfig.cmake`` file.
+
+``set_and_check()`` should be used instead of the normal ``set()`` command for
+setting directories and file locations.  Additionally to setting the variable
+it also checks that the referenced file or directory actually exists and fails
+with a ``FATAL_ERROR`` otherwise.  This makes sure that the created
+``FooConfig.cmake`` file does not contain wrong references.
+When using the ``NO_SET_AND_CHECK_MACRO``, this macro is not generated
+into the ``FooConfig.cmake`` file.
+
+``check_required_components(<PackageName>)`` should be called at the end of
+the ``FooConfig.cmake`` file. This macro checks whether all requested,
+non-optional components have been found, and if this is not the case, sets
+the ``Foo_FOUND`` variable to ``FALSE``, so that the package is considered to
+be not found.  It does that by testing the ``Foo_<Component>_FOUND``
+variables for all requested required components.  This macro should be
+called even if the package doesn't provide any components to make sure
+users are not specifying components erroneously.  When using the
+``NO_CHECK_REQUIRED_COMPONENTS_MACRO`` option, this macro is not generated
+into the ``FooConfig.cmake`` file.
+
+For an example see below the documentation for
+:command:`write_basic_package_version_file()`.
+
+Generating a Package Version File
+^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
+
+.. command:: write_basic_package_version_file
+
+ Create a version file for a project::
+
+   write_basic_package_version_file(<filename>
+     [VERSION <major.minor.patch>]
+     COMPATIBILITY <AnyNewerVersion|SameMajorVersion|SameMinorVersion|ExactVersion> )
+
+
+Writes a file for use as ``<PackageName>ConfigVersion.cmake`` file to
+``<filename>``.  See the documentation of :command:`find_package()` for
+details on this.
+
+``<filename>`` is the output filename, it should be in the build tree.
+``<major.minor.patch>`` is the version number of the project to be installed.
+
+If no ``VERSION`` is given, the :variable:`PROJECT_VERSION` variable is used.
+If this hasn't been set, it errors out.
+
+The ``COMPATIBILITY`` mode ``AnyNewerVersion`` means that the installed
+package version will be considered compatible if it is newer or exactly the
+same as the requested version.  This mode should be used for packages which
+are fully backward compatible, also across major versions.
+If ``SameMajorVersion`` is used instead, then the behaviour differs from
+``AnyNewerVersion`` in that the major version number must be the same as
+requested, e.g.  version 2.0 will not be considered compatible if 1.0 is
+requested.  This mode should be used for packages which guarantee backward
+compatibility within the same major version.
+If ``SameMinorVersion`` is used, the behaviour is the same as
+``SameMajorVersion``, but both major and minor version must be the same as
+requested, e.g version 0.2 will not be compatible if 0.1 is requested.
+If ``ExactVersion`` is used, then the package is only considered compatible if
+the requested version matches exactly its own version number (not considering
+the tweak version).  For example, version 1.2.3 of a package is only
+considered compatible to requested version 1.2.3.  This mode is for packages
+without compatibility guarantees.
+If your project has more elaborated version matching rules, you will need to
+write your own custom ``ConfigVersion.cmake`` file instead of using this
+macro.
+
+Internally, this macro executes :command:`configure_file()` to create the
+resulting version file.  Depending on the ``COMPATIBILITY``, the corresponding
+``BasicConfigVersion-<COMPATIBILITY>.cmake.in`` file is used.
+Please note that these files are internal to CMake and you should not call
+:command:`configure_file()` on them yourself, but they can be used as starting
+point to create more sophisticted custom ``ConfigVersion.cmake`` files.
+
+Example Generating Package Files
+^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
+
+Example using both :command:`configure_package_config_file` and
+``write_basic_package_version_file()``:
+
+``CMakeLists.txt``:
+
+.. code-block:: cmake
+
+   set(INCLUDE_INSTALL_DIR include/ ... CACHE )
+   set(LIB_INSTALL_DIR lib/ ... CACHE )
+   set(SYSCONFIG_INSTALL_DIR etc/foo/ ... CACHE )
+   #...
+   include(CMakePackageConfigHelpers)
+   configure_package_config_file(FooConfig.cmake.in
+     ${CMAKE_CURRENT_BINARY_DIR}/FooConfig.cmake
+     INSTALL_DESTINATION ${LIB_INSTALL_DIR}/Foo/cmake
+     PATH_VARS INCLUDE_INSTALL_DIR SYSCONFIG_INSTALL_DIR)
+   write_basic_package_version_file(
+     ${CMAKE_CURRENT_BINARY_DIR}/FooConfigVersion.cmake
+     VERSION 1.2.3
+     COMPATIBILITY SameMajorVersion )
+   install(FILES ${CMAKE_CURRENT_BINARY_DIR}/FooConfig.cmake
+                 ${CMAKE_CURRENT_BINARY_DIR}/FooConfigVersion.cmake
+           DESTINATION ${LIB_INSTALL_DIR}/Foo/cmake )
+
+``FooConfig.cmake.in``:
+
+::
+
+   set(FOO_VERSION x.y.z)
+   ...
+   @PACKAGE_INIT@
+   ...
+   set_and_check(FOO_INCLUDE_DIR "@PACKAGE_INCLUDE_INSTALL_DIR@")
+   set_and_check(FOO_SYSCONFIG_DIR "@PACKAGE_SYSCONFIG_INSTALL_DIR@")
+
+   check_required_components(Foo)
+#]=======================================================================]
 
 include(WriteBasicConfigVersionFile)
 
diff --git a/Modules/CMakeParseArguments.cmake b/Modules/CMakeParseArguments.cmake
index 7ee2bba..c753b7f 100644
--- a/Modules/CMakeParseArguments.cmake
+++ b/Modules/CMakeParseArguments.cmake
@@ -1,11 +1,12 @@
 # Distributed under the OSI-approved BSD 3-Clause License.  See accompanying
 # file Copyright.txt or https://cmake.org/licensing for details.
 
-#.rst:
-# CMakeParseArguments
-# -------------------
-#
-# This module once implemented the :command:`cmake_parse_arguments` command
-# that is now implemented natively by CMake.  It is now an empty placeholder
-# for compatibility with projects that include it to get the command from
-# CMake 3.4 and lower.
+#[=======================================================================[.rst:
+CMakeParseArguments
+-------------------
+
+This module once implemented the :command:`cmake_parse_arguments` command
+that is now implemented natively by CMake.  It is now an empty placeholder
+for compatibility with projects that include it to get the command from
+CMake 3.4 and lower.
+#]=======================================================================]
diff --git a/Modules/CMakePrintHelpers.cmake b/Modules/CMakePrintHelpers.cmake
index 21c333e..d5bbb4f 100644
--- a/Modules/CMakePrintHelpers.cmake
+++ b/Modules/CMakePrintHelpers.cmake
@@ -1,43 +1,44 @@
 # Distributed under the OSI-approved BSD 3-Clause License.  See accompanying
 # file Copyright.txt or https://cmake.org/licensing for details.
 
-#.rst:
-# CMakePrintHelpers
-# -----------------
-#
-# Convenience macros for printing properties and variables, useful e.g. for debugging.
-#
-# ::
-#
-#  CMAKE_PRINT_PROPERTIES([TARGETS target1 ..  targetN]
-#                         [SOURCES source1 .. sourceN]
-#                         [DIRECTORIES dir1 .. dirN]
-#                         [TESTS test1 .. testN]
-#                         [CACHE_ENTRIES entry1 .. entryN]
-#                         PROPERTIES prop1 .. propN )
-#
-# This macro prints the values of the properties of the given targets,
-# source files, directories, tests or cache entries.  Exactly one of the
-# scope keywords must be used.  Example::
-#
-#    cmake_print_properties(TARGETS foo bar PROPERTIES
-#                           LOCATION INTERFACE_INCLUDE_DIRS)
-#
-# This will print the LOCATION and INTERFACE_INCLUDE_DIRS properties for
-# both targets foo and bar.
-#
-#
-#
-# CMAKE_PRINT_VARIABLES(var1 var2 ..  varN)
-#
-# This macro will print the name of each variable followed by its value.
-# Example::
-#
-#   cmake_print_variables(CMAKE_C_COMPILER CMAKE_MAJOR_VERSION DOES_NOT_EXIST)
-#
-# Gives::
-#
-#   -- CMAKE_C_COMPILER="/usr/bin/gcc" ; CMAKE_MAJOR_VERSION="2" ; DOES_NOT_EXIST=""
+#[=======================================================================[.rst:
+CMakePrintHelpers
+-----------------
+
+Convenience macros for printing properties and variables, useful e.g. for debugging.
+
+::
+
+ CMAKE_PRINT_PROPERTIES([TARGETS target1 ..  targetN]
+                        [SOURCES source1 .. sourceN]
+                        [DIRECTORIES dir1 .. dirN]
+                        [TESTS test1 .. testN]
+                        [CACHE_ENTRIES entry1 .. entryN]
+                        PROPERTIES prop1 .. propN )
+
+This macro prints the values of the properties of the given targets,
+source files, directories, tests or cache entries.  Exactly one of the
+scope keywords must be used.  Example::
+
+   cmake_print_properties(TARGETS foo bar PROPERTIES
+                          LOCATION INTERFACE_INCLUDE_DIRS)
+
+This will print the LOCATION and INTERFACE_INCLUDE_DIRS properties for
+both targets foo and bar.
+
+
+
+CMAKE_PRINT_VARIABLES(var1 var2 ..  varN)
+
+This macro will print the name of each variable followed by its value.
+Example::
+
+  cmake_print_variables(CMAKE_C_COMPILER CMAKE_MAJOR_VERSION DOES_NOT_EXIST)
+
+Gives::
+
+  -- CMAKE_C_COMPILER="/usr/bin/gcc" ; CMAKE_MAJOR_VERSION="2" ; DOES_NOT_EXIST=""
+#]=======================================================================]
 
 function(CMAKE_PRINT_VARIABLES)
    set(msg "")
diff --git a/Modules/CMakePrintSystemInformation.cmake b/Modules/CMakePrintSystemInformation.cmake
index e74c801..f873a4d 100644
--- a/Modules/CMakePrintSystemInformation.cmake
+++ b/Modules/CMakePrintSystemInformation.cmake
@@ -1,14 +1,15 @@
 # Distributed under the OSI-approved BSD 3-Clause License.  See accompanying
 # file Copyright.txt or https://cmake.org/licensing for details.
 
-#.rst:
-# CMakePrintSystemInformation
-# ---------------------------
-#
-# print system information
-#
-# This file can be used for diagnostic purposes just include it in a
-# project to see various internal CMake variables.
+#[=======================================================================[.rst:
+CMakePrintSystemInformation
+---------------------------
+
+print system information
+
+This file can be used for diagnostic purposes just include it in a
+project to see various internal CMake variables.
+#]=======================================================================]
 
 message("CMAKE_SYSTEM is ${CMAKE_SYSTEM} ${CMAKE_SYSTEM_NAME} ${CMAKE_SYSTEM_VERSION}")
 message("CMAKE_SYSTEM file is ${CMAKE_SYSTEM_INFO_FILE}")
diff --git a/Modules/CMakePushCheckState.cmake b/Modules/CMakePushCheckState.cmake
index 98eea05..7628d1a 100644
--- a/Modules/CMakePushCheckState.cmake
+++ b/Modules/CMakePushCheckState.cmake
@@ -1,40 +1,41 @@
 # Distributed under the OSI-approved BSD 3-Clause License.  See accompanying
 # file Copyright.txt or https://cmake.org/licensing for details.
 
-#.rst:
-# CMakePushCheckState
-# -------------------
-#
-#
-#
-# This module defines three macros: CMAKE_PUSH_CHECK_STATE()
-# CMAKE_POP_CHECK_STATE() and CMAKE_RESET_CHECK_STATE() These macros can
-# be used to save, restore and reset (i.e., clear contents) the state of
-# the variables CMAKE_REQUIRED_FLAGS, CMAKE_REQUIRED_DEFINITIONS,
-# CMAKE_REQUIRED_LIBRARIES, CMAKE_REQUIRED_INCLUDES and CMAKE_EXTRA_INCLUDE_FILES
-# used by the various Check-files coming with CMake, like e.g.
-# check_function_exists() etc.  The variable contents are pushed on a
-# stack, pushing multiple times is supported.  This is useful e.g.  when
-# executing such tests in a Find-module, where they have to be set, but
-# after the Find-module has been executed they should have the same
-# value as they had before.
-#
-# CMAKE_PUSH_CHECK_STATE() macro receives optional argument RESET.
-# Whether it's specified, CMAKE_PUSH_CHECK_STATE() will set all
-# CMAKE_REQUIRED_* variables to empty values, same as
-# CMAKE_RESET_CHECK_STATE() call will do.
-#
-# Usage:
-#
-# ::
-#
-#    cmake_push_check_state(RESET)
-#    set(CMAKE_REQUIRED_DEFINITIONS -DSOME_MORE_DEF)
-#    check_function_exists(...)
-#    cmake_reset_check_state()
-#    set(CMAKE_REQUIRED_DEFINITIONS -DANOTHER_DEF)
-#    check_function_exists(...)
-#    cmake_pop_check_state()
+#[=======================================================================[.rst:
+CMakePushCheckState
+-------------------
+
+
+
+This module defines three macros: CMAKE_PUSH_CHECK_STATE()
+CMAKE_POP_CHECK_STATE() and CMAKE_RESET_CHECK_STATE() These macros can
+be used to save, restore and reset (i.e., clear contents) the state of
+the variables CMAKE_REQUIRED_FLAGS, CMAKE_REQUIRED_DEFINITIONS,
+CMAKE_REQUIRED_LIBRARIES, CMAKE_REQUIRED_INCLUDES and CMAKE_EXTRA_INCLUDE_FILES
+used by the various Check-files coming with CMake, like e.g.
+check_function_exists() etc.  The variable contents are pushed on a
+stack, pushing multiple times is supported.  This is useful e.g.  when
+executing such tests in a Find-module, where they have to be set, but
+after the Find-module has been executed they should have the same
+value as they had before.
+
+CMAKE_PUSH_CHECK_STATE() macro receives optional argument RESET.
+Whether it's specified, CMAKE_PUSH_CHECK_STATE() will set all
+CMAKE_REQUIRED_* variables to empty values, same as
+CMAKE_RESET_CHECK_STATE() call will do.
+
+Usage:
+
+::
+
+   cmake_push_check_state(RESET)
+   set(CMAKE_REQUIRED_DEFINITIONS -DSOME_MORE_DEF)
+   check_function_exists(...)
+   cmake_reset_check_state()
+   set(CMAKE_REQUIRED_DEFINITIONS -DANOTHER_DEF)
+   check_function_exists(...)
+   cmake_pop_check_state()
+#]=======================================================================]
 
 macro(CMAKE_RESET_CHECK_STATE)
 
diff --git a/Modules/CMakeVerifyManifest.cmake b/Modules/CMakeVerifyManifest.cmake
index c477ab1..705ef8a 100644
--- a/Modules/CMakeVerifyManifest.cmake
+++ b/Modules/CMakeVerifyManifest.cmake
@@ -1,22 +1,23 @@
 # Distributed under the OSI-approved BSD 3-Clause License.  See accompanying
 # file Copyright.txt or https://cmake.org/licensing for details.
 
-#.rst:
-# CMakeVerifyManifest
-# -------------------
-#
-#
-#
-# CMakeVerifyManifest.cmake
-#
-# This script is used to verify that embedded manifests and side by side
-# manifests for a project match.  To run this script, cd to a directory
-# and run the script with cmake -P.  On the command line you can pass in
-# versions that are OK even if not found in the .manifest files.  For
-# example, cmake -Dallow_versions=8.0.50608.0
-# -PCmakeVerifyManifest.cmake could be used to allow an embedded manifest
-# of 8.0.50608.0 to be used in a project even if that version was not
-# found in the .manifest file.
+#[=======================================================================[.rst:
+CMakeVerifyManifest
+-------------------
+
+
+
+CMakeVerifyManifest.cmake
+
+This script is used to verify that embedded manifests and side by side
+manifests for a project match.  To run this script, cd to a directory
+and run the script with cmake -P.  On the command line you can pass in
+versions that are OK even if not found in the .manifest files.  For
+example, cmake -Dallow_versions=8.0.50608.0
+-PCmakeVerifyManifest.cmake could be used to allow an embedded manifest
+of 8.0.50608.0 to be used in a project even if that version was not
+found in the .manifest file.
+#]=======================================================================]
 
 # This script first recursively globs *.manifest files from
 # the current directory.  Then globs *.exe and *.dll.  Each
diff --git a/Modules/CPackComponent.cmake b/Modules/CPackComponent.cmake
index a0d9935..211d767 100644
--- a/Modules/CPackComponent.cmake
+++ b/Modules/CPackComponent.cmake
@@ -1,313 +1,314 @@
 # Distributed under the OSI-approved BSD 3-Clause License.  See accompanying
 # file Copyright.txt or https://cmake.org/licensing for details.
 
-#.rst:
-# CPackComponent
-# --------------
-#
-# Build binary and source package installers
-#
-# Variables concerning CPack Components
-# ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
-#
-# The CPackComponent module is the module which handles the component
-# part of CPack.  See CPack module for general information about CPack.
-#
-# For certain kinds of binary installers (including the graphical
-# installers on macOS and Windows), CPack generates installers that
-# allow users to select individual application components to install.
-# The contents of each of the components are identified by the COMPONENT
-# argument of CMake's INSTALL command.  These components can be
-# annotated with user-friendly names and descriptions, inter-component
-# dependencies, etc., and grouped in various ways to customize the
-# resulting installer.  See the cpack_add_* commands, described below,
-# for more information about component-specific installations.
-#
-# Component-specific installation allows users to select specific sets
-# of components to install during the install process.  Installation
-# components are identified by the COMPONENT argument of CMake's INSTALL
-# commands, and should be further described by the following CPack
-# commands:
-#
-# .. variable:: CPACK_COMPONENTS_ALL
-#
-#  The list of component to install.
-#
-#  The default value of this variable is computed by CPack and contains all
-#  components defined by the project.  The user may set it to only include the
-#  specified components.
-#
-#  Instead of specifying all the desired components, it is possible to obtain a
-#  list of all defined components and then remove the unwanted ones from the
-#  list. The :command:`get_cmake_property` command can be used to obtain the
-#  ``COMPONENTS`` property, then the :command:`list(REMOVE_ITEM)` command can be
-#  used to remove the unwanted ones. For example, to use all defined components
-#  except ``foo`` and ``bar``::
-#
-#    get_cmake_property(CPACK_COMPONENTS_ALL COMPONENTS)
-#    list(REMOVE_ITEM CPACK_COMPONENTS_ALL "foo" "bar")
-#
-# .. variable:: CPACK_<GENNAME>_COMPONENT_INSTALL
-#
-#  Enable/Disable component install for CPack generator <GENNAME>.
-#
-#  Each CPack Generator (RPM, DEB, ARCHIVE, NSIS, DMG, etc...) has a legacy
-#  default behavior.  e.g.  RPM builds monolithic whereas NSIS builds
-#  component.  One can change the default behavior by setting this variable to
-#  0/1 or OFF/ON.
-#
-# .. variable:: CPACK_COMPONENTS_GROUPING
-#
-#  Specify how components are grouped for multi-package component-aware CPack
-#  generators.
-#
-#  Some generators like RPM or ARCHIVE family (TGZ, ZIP, ...) generates
-#  several packages files when asked for component packaging.  They group
-#  the component differently depending on the value of this variable:
-#
-#  * ONE_PER_GROUP (default): creates one package file per component group
-#  * ALL_COMPONENTS_IN_ONE : creates a single package with all (requested) components
-#  * IGNORE : creates one package per component, i.e. IGNORE component group
-#
-#  One can specify different grouping for different CPack generator by
-#  using a CPACK_PROJECT_CONFIG_FILE.
-#
-# .. variable:: CPACK_COMPONENT_<compName>_DISPLAY_NAME
-#
-#  The name to be displayed for a component.
-#
-# .. variable:: CPACK_COMPONENT_<compName>_DESCRIPTION
-#
-#  The description of a component.
-#
-# .. variable:: CPACK_COMPONENT_<compName>_GROUP
-#
-#  The group of a component.
-#
-# .. variable:: CPACK_COMPONENT_<compName>_DEPENDS
-#
-#  The dependencies (list of components) on which this component depends.
-#
-# .. variable:: CPACK_COMPONENT_<compName>_HIDDEN
-#
-#  True if this component is hidden from the user.
-#
-# .. variable:: CPACK_COMPONENT_<compName>_REQUIRED
-#
-#  True if this component is required.
-#
-# .. variable:: CPACK_COMPONENT_<compName>_DISABLED
-#
-#  True if this component is not selected to be installed by default.
-#
-# .. command:: cpack_add_component
-#
-# Describes a CPack installation
-# component named by the COMPONENT argument to a CMake INSTALL command.
-#
-# ::
-#
-#   cpack_add_component(compname
-#                       [DISPLAY_NAME name]
-#                       [DESCRIPTION description]
-#                       [HIDDEN | REQUIRED | DISABLED ]
-#                       [GROUP group]
-#                       [DEPENDS comp1 comp2 ... ]
-#                       [INSTALL_TYPES type1 type2 ... ]
-#                       [DOWNLOADED]
-#                       [ARCHIVE_FILE filename]
-#                       [PLIST filename])
-#
-#
-#
-# The cmake_add_component command describes an installation component,
-# which the user can opt to install or remove as part of the graphical
-# installation process.  compname is the name of the component, as
-# provided to the COMPONENT argument of one or more CMake INSTALL
-# commands.
-#
-# DISPLAY_NAME is the displayed name of the component, used in graphical
-# installers to display the component name.  This value can be any
-# string.
-#
-# DESCRIPTION is an extended description of the component, used in
-# graphical installers to give the user additional information about the
-# component.  Descriptions can span multiple lines using ``\n`` as the
-# line separator.  Typically, these descriptions should be no more than
-# a few lines long.
-#
-# HIDDEN indicates that this component will be hidden in the graphical
-# installer, so that the user cannot directly change whether it is
-# installed or not.
-#
-# REQUIRED indicates that this component is required, and therefore will
-# always be installed.  It will be visible in the graphical installer,
-# but it cannot be unselected.  (Typically, required components are
-# shown greyed out).
-#
-# DISABLED indicates that this component should be disabled (unselected)
-# by default.  The user is free to select this component for
-# installation, unless it is also HIDDEN.
-#
-# DEPENDS lists the components on which this component depends.  If this
-# component is selected, then each of the components listed must also be
-# selected.  The dependency information is encoded within the installer
-# itself, so that users cannot install inconsistent sets of components.
-#
-# GROUP names the component group of which this component is a part.  If
-# not provided, the component will be a standalone component, not part
-# of any component group.  Component groups are described with the
-# cpack_add_component_group command, detailed below.
-#
-# INSTALL_TYPES lists the installation types of which this component is
-# a part.  When one of these installations types is selected, this
-# component will automatically be selected.  Installation types are
-# described with the cpack_add_install_type command, detailed below.
-#
-# DOWNLOADED indicates that this component should be downloaded
-# on-the-fly by the installer, rather than packaged in with the
-# installer itself.  For more information, see the
-# cpack_configure_downloads command.
-#
-# ARCHIVE_FILE provides a name for the archive file created by CPack to
-# be used for downloaded components.  If not supplied, CPack will create
-# a file with some name based on CPACK_PACKAGE_FILE_NAME and the name of
-# the component.  See cpack_configure_downloads for more information.
-#
-# PLIST gives a filename that is passed to pkgbuild with the
-# ``--component-plist`` argument when using the productbuild generator.
-#
-# .. command:: cpack_add_component_group
-#
-# Describes a group of related CPack installation components.
-#
-# ::
-#
-#   cpack_add_component_group(groupname
-#                            [DISPLAY_NAME name]
-#                            [DESCRIPTION description]
-#                            [PARENT_GROUP parent]
-#                            [EXPANDED]
-#                            [BOLD_TITLE])
-#
-#
-#
-# The cpack_add_component_group describes a group of installation
-# components, which will be placed together within the listing of
-# options.  Typically, component groups allow the user to
-# select/deselect all of the components within a single group via a
-# single group-level option.  Use component groups to reduce the
-# complexity of installers with many options.  groupname is an arbitrary
-# name used to identify the group in the GROUP argument of the
-# cpack_add_component command, which is used to place a component in a
-# group.  The name of the group must not conflict with the name of any
-# component.
-#
-# DISPLAY_NAME is the displayed name of the component group, used in
-# graphical installers to display the component group name.  This value
-# can be any string.
-#
-# DESCRIPTION is an extended description of the component group, used in
-# graphical installers to give the user additional information about the
-# components within that group.  Descriptions can span multiple lines
-# using ``\n`` as the line separator.  Typically, these descriptions
-# should be no more than a few lines long.
-#
-# PARENT_GROUP, if supplied, names the parent group of this group.
-# Parent groups are used to establish a hierarchy of groups, providing
-# an arbitrary hierarchy of groups.
-#
-# EXPANDED indicates that, by default, the group should show up as
-# "expanded", so that the user immediately sees all of the components
-# within the group.  Otherwise, the group will initially show up as a
-# single entry.
-#
-# BOLD_TITLE indicates that the group title should appear in bold, to
-# call the user's attention to the group.
-#
-# .. command:: cpack_add_install_type
-#
-# Add a new installation type containing
-# a set of predefined component selections to the graphical installer.
-#
-# ::
-#
-#   cpack_add_install_type(typename
-#                          [DISPLAY_NAME name])
-#
-#
-#
-# The cpack_add_install_type command identifies a set of preselected
-# components that represents a common use case for an application.  For
-# example, a "Developer" install type might include an application along
-# with its header and library files, while an "End user" install type
-# might just include the application's executable.  Each component
-# identifies itself with one or more install types via the INSTALL_TYPES
-# argument to cpack_add_component.
-#
-# DISPLAY_NAME is the displayed name of the install type, which will
-# typically show up in a drop-down box within a graphical installer.
-# This value can be any string.
-#
-# .. command:: cpack_configure_downloads
-#
-# Configure CPack to download
-# selected components on-the-fly as part of the installation process.
-#
-# ::
-#
-#   cpack_configure_downloads(site
-#                             [UPLOAD_DIRECTORY dirname]
-#                             [ALL]
-#                             [ADD_REMOVE|NO_ADD_REMOVE])
-#
-#
-#
-# The cpack_configure_downloads command configures installation-time
-# downloads of selected components.  For each downloadable component,
-# CPack will create an archive containing the contents of that
-# component, which should be uploaded to the given site.  When the user
-# selects that component for installation, the installer will download
-# and extract the component in place.  This feature is useful for
-# creating small installers that only download the requested components,
-# saving bandwidth.  Additionally, the installers are small enough that
-# they will be installed as part of the normal installation process, and
-# the "Change" button in Windows Add/Remove Programs control panel will
-# allow one to add or remove parts of the application after the original
-# installation.  On Windows, the downloaded-components functionality
-# requires the ZipDLL plug-in for NSIS, available at:
-#
-# ::
-#
-#   http://nsis.sourceforge.net/ZipDLL_plug-in
-#
-#
-#
-# On macOS, installers that download components on-the-fly can only
-# be built and installed on system using macOS 10.5 or later.
-#
-# The site argument is a URL where the archives for downloadable
-# components will reside, e.g.,
-# https://cmake.org/files/2.6.1/installer/ All of the archives
-# produced by CPack should be uploaded to that location.
-#
-# UPLOAD_DIRECTORY is the local directory where CPack will create the
-# various archives for each of the components.  The contents of this
-# directory should be uploaded to a location accessible by the URL given
-# in the site argument.  If omitted, CPack will use the directory
-# CPackUploads inside the CMake binary directory to store the generated
-# archives.
-#
-# The ALL flag indicates that all components be downloaded.  Otherwise,
-# only those components explicitly marked as DOWNLOADED or that have a
-# specified ARCHIVE_FILE will be downloaded.  Additionally, the ALL
-# option implies ADD_REMOVE (unless NO_ADD_REMOVE is specified).
-#
-# ADD_REMOVE indicates that CPack should install a copy of the installer
-# that can be called from Windows' Add/Remove Programs dialog (via the
-# "Modify" button) to change the set of installed components.
-# NO_ADD_REMOVE turns off this behavior.  This option is ignored on Mac
-# OS X.
+#[=======================================================================[.rst:
+CPackComponent
+--------------
+
+Build binary and source package installers
+
+Variables concerning CPack Components
+^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
+
+The CPackComponent module is the module which handles the component
+part of CPack.  See CPack module for general information about CPack.
+
+For certain kinds of binary installers (including the graphical
+installers on macOS and Windows), CPack generates installers that
+allow users to select individual application components to install.
+The contents of each of the components are identified by the COMPONENT
+argument of CMake's INSTALL command.  These components can be
+annotated with user-friendly names and descriptions, inter-component
+dependencies, etc., and grouped in various ways to customize the
+resulting installer.  See the cpack_add_* commands, described below,
+for more information about component-specific installations.
+
+Component-specific installation allows users to select specific sets
+of components to install during the install process.  Installation
+components are identified by the COMPONENT argument of CMake's INSTALL
+commands, and should be further described by the following CPack
+commands:
+
+.. variable:: CPACK_COMPONENTS_ALL
+
+ The list of component to install.
+
+ The default value of this variable is computed by CPack and contains all
+ components defined by the project.  The user may set it to only include the
+ specified components.
+
+ Instead of specifying all the desired components, it is possible to obtain a
+ list of all defined components and then remove the unwanted ones from the
+ list. The :command:`get_cmake_property` command can be used to obtain the
+ ``COMPONENTS`` property, then the :command:`list(REMOVE_ITEM)` command can be
+ used to remove the unwanted ones. For example, to use all defined components
+ except ``foo`` and ``bar``::
+
+   get_cmake_property(CPACK_COMPONENTS_ALL COMPONENTS)
+   list(REMOVE_ITEM CPACK_COMPONENTS_ALL "foo" "bar")
+
+.. variable:: CPACK_<GENNAME>_COMPONENT_INSTALL
+
+ Enable/Disable component install for CPack generator <GENNAME>.
+
+ Each CPack Generator (RPM, DEB, ARCHIVE, NSIS, DMG, etc...) has a legacy
+ default behavior.  e.g.  RPM builds monolithic whereas NSIS builds
+ component.  One can change the default behavior by setting this variable to
+ 0/1 or OFF/ON.
+
+.. variable:: CPACK_COMPONENTS_GROUPING
+
+ Specify how components are grouped for multi-package component-aware CPack
+ generators.
+
+ Some generators like RPM or ARCHIVE family (TGZ, ZIP, ...) generates
+ several packages files when asked for component packaging.  They group
+ the component differently depending on the value of this variable:
+
+ * ONE_PER_GROUP (default): creates one package file per component group
+ * ALL_COMPONENTS_IN_ONE : creates a single package with all (requested) components
+ * IGNORE : creates one package per component, i.e. IGNORE component group
+
+ One can specify different grouping for different CPack generator by
+ using a CPACK_PROJECT_CONFIG_FILE.
+
+.. variable:: CPACK_COMPONENT_<compName>_DISPLAY_NAME
+
+ The name to be displayed for a component.
+
+.. variable:: CPACK_COMPONENT_<compName>_DESCRIPTION
+
+ The description of a component.
+
+.. variable:: CPACK_COMPONENT_<compName>_GROUP
+
+ The group of a component.
+
+.. variable:: CPACK_COMPONENT_<compName>_DEPENDS
+
+ The dependencies (list of components) on which this component depends.
+
+.. variable:: CPACK_COMPONENT_<compName>_HIDDEN
+
+ True if this component is hidden from the user.
+
+.. variable:: CPACK_COMPONENT_<compName>_REQUIRED
+
+ True if this component is required.
+
+.. variable:: CPACK_COMPONENT_<compName>_DISABLED
+
+ True if this component is not selected to be installed by default.
+
+.. command:: cpack_add_component
+
+Describes a CPack installation
+component named by the COMPONENT argument to a CMake INSTALL command.
+
+::
+
+  cpack_add_component(compname
+                      [DISPLAY_NAME name]
+                      [DESCRIPTION description]
+                      [HIDDEN | REQUIRED | DISABLED ]
+                      [GROUP group]
+                      [DEPENDS comp1 comp2 ... ]
+                      [INSTALL_TYPES type1 type2 ... ]
+                      [DOWNLOADED]
+                      [ARCHIVE_FILE filename]
+                      [PLIST filename])
+
+
+
+The cmake_add_component command describes an installation component,
+which the user can opt to install or remove as part of the graphical
+installation process.  compname is the name of the component, as
+provided to the COMPONENT argument of one or more CMake INSTALL
+commands.
+
+DISPLAY_NAME is the displayed name of the component, used in graphical
+installers to display the component name.  This value can be any
+string.
+
+DESCRIPTION is an extended description of the component, used in
+graphical installers to give the user additional information about the
+component.  Descriptions can span multiple lines using ``\n`` as the
+line separator.  Typically, these descriptions should be no more than
+a few lines long.
+
+HIDDEN indicates that this component will be hidden in the graphical
+installer, so that the user cannot directly change whether it is
+installed or not.
+
+REQUIRED indicates that this component is required, and therefore will
+always be installed.  It will be visible in the graphical installer,
+but it cannot be unselected.  (Typically, required components are
+shown greyed out).
+
+DISABLED indicates that this component should be disabled (unselected)
+by default.  The user is free to select this component for
+installation, unless it is also HIDDEN.
+
+DEPENDS lists the components on which this component depends.  If this
+component is selected, then each of the components listed must also be
+selected.  The dependency information is encoded within the installer
+itself, so that users cannot install inconsistent sets of components.
+
+GROUP names the component group of which this component is a part.  If
+not provided, the component will be a standalone component, not part
+of any component group.  Component groups are described with the
+cpack_add_component_group command, detailed below.
+
+INSTALL_TYPES lists the installation types of which this component is
+a part.  When one of these installations types is selected, this
+component will automatically be selected.  Installation types are
+described with the cpack_add_install_type command, detailed below.
+
+DOWNLOADED indicates that this component should be downloaded
+on-the-fly by the installer, rather than packaged in with the
+installer itself.  For more information, see the
+cpack_configure_downloads command.
+
+ARCHIVE_FILE provides a name for the archive file created by CPack to
+be used for downloaded components.  If not supplied, CPack will create
+a file with some name based on CPACK_PACKAGE_FILE_NAME and the name of
+the component.  See cpack_configure_downloads for more information.
+
+PLIST gives a filename that is passed to pkgbuild with the
+``--component-plist`` argument when using the productbuild generator.
+
+.. command:: cpack_add_component_group
+
+Describes a group of related CPack installation components.
+
+::
+
+  cpack_add_component_group(groupname
+                           [DISPLAY_NAME name]
+                           [DESCRIPTION description]
+                           [PARENT_GROUP parent]
+                           [EXPANDED]
+                           [BOLD_TITLE])
+
+
+
+The cpack_add_component_group describes a group of installation
+components, which will be placed together within the listing of
+options.  Typically, component groups allow the user to
+select/deselect all of the components within a single group via a
+single group-level option.  Use component groups to reduce the
+complexity of installers with many options.  groupname is an arbitrary
+name used to identify the group in the GROUP argument of the
+cpack_add_component command, which is used to place a component in a
+group.  The name of the group must not conflict with the name of any
+component.
+
+DISPLAY_NAME is the displayed name of the component group, used in
+graphical installers to display the component group name.  This value
+can be any string.
+
+DESCRIPTION is an extended description of the component group, used in
+graphical installers to give the user additional information about the
+components within that group.  Descriptions can span multiple lines
+using ``\n`` as the line separator.  Typically, these descriptions
+should be no more than a few lines long.
+
+PARENT_GROUP, if supplied, names the parent group of this group.
+Parent groups are used to establish a hierarchy of groups, providing
+an arbitrary hierarchy of groups.
+
+EXPANDED indicates that, by default, the group should show up as
+"expanded", so that the user immediately sees all of the components
+within the group.  Otherwise, the group will initially show up as a
+single entry.
+
+BOLD_TITLE indicates that the group title should appear in bold, to
+call the user's attention to the group.
+
+.. command:: cpack_add_install_type
+
+Add a new installation type containing
+a set of predefined component selections to the graphical installer.
+
+::
+
+  cpack_add_install_type(typename
+                         [DISPLAY_NAME name])
+
+
+
+The cpack_add_install_type command identifies a set of preselected
+components that represents a common use case for an application.  For
+example, a "Developer" install type might include an application along
+with its header and library files, while an "End user" install type
+might just include the application's executable.  Each component
+identifies itself with one or more install types via the INSTALL_TYPES
+argument to cpack_add_component.
+
+DISPLAY_NAME is the displayed name of the install type, which will
+typically show up in a drop-down box within a graphical installer.
+This value can be any string.
+
+.. command:: cpack_configure_downloads
+
+Configure CPack to download
+selected components on-the-fly as part of the installation process.
+
+::
+
+  cpack_configure_downloads(site
+                            [UPLOAD_DIRECTORY dirname]
+                            [ALL]
+                            [ADD_REMOVE|NO_ADD_REMOVE])
+
+
+
+The cpack_configure_downloads command configures installation-time
+downloads of selected components.  For each downloadable component,
+CPack will create an archive containing the contents of that
+component, which should be uploaded to the given site.  When the user
+selects that component for installation, the installer will download
+and extract the component in place.  This feature is useful for
+creating small installers that only download the requested components,
+saving bandwidth.  Additionally, the installers are small enough that
+they will be installed as part of the normal installation process, and
+the "Change" button in Windows Add/Remove Programs control panel will
+allow one to add or remove parts of the application after the original
+installation.  On Windows, the downloaded-components functionality
+requires the ZipDLL plug-in for NSIS, available at:
+
+::
+
+  http://nsis.sourceforge.net/ZipDLL_plug-in
+
+
+
+On macOS, installers that download components on-the-fly can only
+be built and installed on system using macOS 10.5 or later.
+
+The site argument is a URL where the archives for downloadable
+components will reside, e.g.,
+https://cmake.org/files/2.6.1/installer/ All of the archives
+produced by CPack should be uploaded to that location.
+
+UPLOAD_DIRECTORY is the local directory where CPack will create the
+various archives for each of the components.  The contents of this
+directory should be uploaded to a location accessible by the URL given
+in the site argument.  If omitted, CPack will use the directory
+CPackUploads inside the CMake binary directory to store the generated
+archives.
+
+The ALL flag indicates that all components be downloaded.  Otherwise,
+only those components explicitly marked as DOWNLOADED or that have a
+specified ARCHIVE_FILE will be downloaded.  Additionally, the ALL
+option implies ADD_REMOVE (unless NO_ADD_REMOVE is specified).
+
+ADD_REMOVE indicates that CPack should install a copy of the installer
+that can be called from Windows' Add/Remove Programs dialog (via the
+"Modify" button) to change the set of installed components.
+NO_ADD_REMOVE turns off this behavior.  This option is ignored on Mac
+OS X.
+#]=======================================================================]
 
 # Define var in order to avoid multiple inclusion
 if(NOT CPackComponent_CMake_INCLUDED)
diff --git a/Modules/CPackIFWConfigureFile.cmake b/Modules/CPackIFWConfigureFile.cmake
index 790574a..0abe0da 100644
--- a/Modules/CPackIFWConfigureFile.cmake
+++ b/Modules/CPackIFWConfigureFile.cmake
@@ -1,32 +1,33 @@
 # Distributed under the OSI-approved BSD 3-Clause License.  See accompanying
 # file Copyright.txt or https://cmake.org/licensing for details.
 
-#.rst:
-# CPackIFWConfigureFile
-# ---------------------
-#
-# The module defines :command:`configure_file` similar command to
-# configure file templates prepared in QtIFW/SDK/Creator style.
-#
-#
-# Commands
-# ^^^^^^^^
-#
-# The module defines the following commands:
-#
-# .. command:: cpack_ifw_configure_file
-#
-#   Copy a file to another location and modify its contents.
-#
-#   ::
-#
-#     cpack_ifw_configure_file(<input> <output>)
-#
-#   Copies an ``<input>`` file to an ``<output>`` file and substitutes variable
-#   values referenced as ``%{VAR}`` or ``%VAR%`` in the input file content.
-#   Each variable reference will be replaced with the current value of the
-#   variable, or the empty string if the variable is not defined.
-#
+#[=======================================================================[.rst:
+CPackIFWConfigureFile
+---------------------
+
+The module defines :command:`configure_file` similar command to
+configure file templates prepared in QtIFW/SDK/Creator style.
+
+
+Commands
+^^^^^^^^
+
+The module defines the following commands:
+
+.. command:: cpack_ifw_configure_file
+
+  Copy a file to another location and modify its contents.
+
+  ::
+
+    cpack_ifw_configure_file(<input> <output>)
+
+  Copies an ``<input>`` file to an ``<output>`` file and substitutes variable
+  values referenced as ``%{VAR}`` or ``%VAR%`` in the input file content.
+  Each variable reference will be replaced with the current value of the
+  variable, or the empty string if the variable is not defined.
+
+#]=======================================================================]
 
 # NOTE: This file used to himself packaging via CPack IFW generator and
 # should be compatible with minimal CMake version defined in
diff --git a/Modules/CTestCoverageCollectGCOV.cmake b/Modules/CTestCoverageCollectGCOV.cmake
index 1203be4..2258271 100644
--- a/Modules/CTestCoverageCollectGCOV.cmake
+++ b/Modules/CTestCoverageCollectGCOV.cmake
@@ -1,69 +1,70 @@
 # Distributed under the OSI-approved BSD 3-Clause License.  See accompanying
 # file Copyright.txt or https://cmake.org/licensing for details.
 
-#.rst:
-# CTestCoverageCollectGCOV
-# ------------------------
-#
-# This module provides the ``ctest_coverage_collect_gcov`` function.
-#
-# This function runs gcov on all .gcda files found in the binary tree
-# and packages the resulting .gcov files into a tar file.
-# This tarball also contains the following:
-#
-# * *data.json* defines the source and build directories for use by CDash.
-# * *Labels.json* indicates any :prop_sf:`LABELS` that have been set on the
-#   source files.
-# * The *uncovered* directory holds any uncovered files found by
-#   :variable:`CTEST_EXTRA_COVERAGE_GLOB`.
-#
-# After generating this tar file, it can be sent to CDash for display with the
-# :command:`ctest_submit(CDASH_UPLOAD)` command.
-#
-# .. command:: cdash_coverage_collect_gcov
-#
-#   ::
-#
-#     ctest_coverage_collect_gcov(TARBALL <tarfile>
-#       [SOURCE <source_dir>][BUILD <build_dir>]
-#       [GCOV_COMMAND <gcov_command>]
-#       [GCOV_OPTIONS <options>...]
-#       )
-#
-#   Run gcov and package a tar file for CDash.  The options are:
-#
-#   ``TARBALL <tarfile>``
-#     Specify the location of the ``.tar`` file to be created for later
-#     upload to CDash.  Relative paths will be interpreted with respect
-#     to the top-level build directory.
-#
-#   ``SOURCE <source_dir>``
-#     Specify the top-level source directory for the build.
-#     Default is the value of :variable:`CTEST_SOURCE_DIRECTORY`.
-#
-#   ``BUILD <build_dir>``
-#     Specify the top-level build directory for the build.
-#     Default is the value of :variable:`CTEST_BINARY_DIRECTORY`.
-#
-#   ``GCOV_COMMAND <gcov_command>``
-#     Specify the full path to the ``gcov`` command on the machine.
-#     Default is the value of :variable:`CTEST_COVERAGE_COMMAND`.
-#
-#   ``GCOV_OPTIONS <options>...``
-#     Specify options to be passed to gcov.  The ``gcov`` command
-#     is run as ``gcov <options>... -o <gcov-dir> <file>.gcda``.
-#     If not specified, the default option is just ``-b``.
-#
-#   ``GLOB``
-#     Recursively search for .gcda files in build_dir rather than
-#     determining search locations by reading TargetDirectories.txt.
-#
-#   ``DELETE``
-#     Delete coverage files after they've been packaged into the .tar.
-#
-#   ``QUIET``
-#     Suppress non-error messages that otherwise would have been
-#     printed out by this function.
+#[=======================================================================[.rst:
+CTestCoverageCollectGCOV
+------------------------
+
+This module provides the ``ctest_coverage_collect_gcov`` function.
+
+This function runs gcov on all .gcda files found in the binary tree
+and packages the resulting .gcov files into a tar file.
+This tarball also contains the following:
+
+* *data.json* defines the source and build directories for use by CDash.
+* *Labels.json* indicates any :prop_sf:`LABELS` that have been set on the
+  source files.
+* The *uncovered* directory holds any uncovered files found by
+  :variable:`CTEST_EXTRA_COVERAGE_GLOB`.
+
+After generating this tar file, it can be sent to CDash for display with the
+:command:`ctest_submit(CDASH_UPLOAD)` command.
+
+.. command:: cdash_coverage_collect_gcov
+
+  ::
+
+    ctest_coverage_collect_gcov(TARBALL <tarfile>
+      [SOURCE <source_dir>][BUILD <build_dir>]
+      [GCOV_COMMAND <gcov_command>]
+      [GCOV_OPTIONS <options>...]
+      )
+
+  Run gcov and package a tar file for CDash.  The options are:
+
+  ``TARBALL <tarfile>``
+    Specify the location of the ``.tar`` file to be created for later
+    upload to CDash.  Relative paths will be interpreted with respect
+    to the top-level build directory.
+
+  ``SOURCE <source_dir>``
+    Specify the top-level source directory for the build.
+    Default is the value of :variable:`CTEST_SOURCE_DIRECTORY`.
+
+  ``BUILD <build_dir>``
+    Specify the top-level build directory for the build.
+    Default is the value of :variable:`CTEST_BINARY_DIRECTORY`.
+
+  ``GCOV_COMMAND <gcov_command>``
+    Specify the full path to the ``gcov`` command on the machine.
+    Default is the value of :variable:`CTEST_COVERAGE_COMMAND`.
+
+  ``GCOV_OPTIONS <options>...``
+    Specify options to be passed to gcov.  The ``gcov`` command
+    is run as ``gcov <options>... -o <gcov-dir> <file>.gcda``.
+    If not specified, the default option is just ``-b``.
+
+  ``GLOB``
+    Recursively search for .gcda files in build_dir rather than
+    determining search locations by reading TargetDirectories.txt.
+
+  ``DELETE``
+    Delete coverage files after they've been packaged into the .tar.
+
+  ``QUIET``
+    Suppress non-error messages that otherwise would have been
+    printed out by this function.
+#]=======================================================================]
 
 function(ctest_coverage_collect_gcov)
   set(options QUIET GLOB DELETE)
diff --git a/Modules/CTestScriptMode.cmake b/Modules/CTestScriptMode.cmake
index 5be78d5..7af3577 100644
--- a/Modules/CTestScriptMode.cmake
+++ b/Modules/CTestScriptMode.cmake
@@ -1,13 +1,14 @@
 # Distributed under the OSI-approved BSD 3-Clause License.  See accompanying
 # file Copyright.txt or https://cmake.org/licensing for details.
 
-#.rst:
-# CTestScriptMode
-# ---------------
-#
-#
-#
-# This file is read by ctest in script mode (-S)
+#[=======================================================================[.rst:
+CTestScriptMode
+---------------
+
+
+
+This file is read by ctest in script mode (-S)
+#]=======================================================================]
 
 # Determine the current system, so this information can be used
 # in ctest scripts
diff --git a/Modules/CTestUseLaunchers.cmake b/Modules/CTestUseLaunchers.cmake
index dc90513..3dff926 100644
--- a/Modules/CTestUseLaunchers.cmake
+++ b/Modules/CTestUseLaunchers.cmake
@@ -1,32 +1,33 @@
 # Distributed under the OSI-approved BSD 3-Clause License.  See accompanying
 # file Copyright.txt or https://cmake.org/licensing for details.
 
-#.rst:
-# CTestUseLaunchers
-# -----------------
-#
-# Set the RULE_LAUNCH_* global properties when CTEST_USE_LAUNCHERS is on.
-#
-# CTestUseLaunchers is automatically included when you include(CTest).
-# However, it is split out into its own module file so projects can use
-# the CTEST_USE_LAUNCHERS functionality independently.
-#
-# To use launchers, set CTEST_USE_LAUNCHERS to ON in a ctest -S
-# dashboard script, and then also set it in the cache of the configured
-# project.  Both cmake and ctest need to know the value of it for the
-# launchers to work properly.  CMake needs to know in order to generate
-# proper build rules, and ctest, in order to produce the proper error
-# and warning analysis.
-#
-# For convenience, you may set the ENV variable
-# CTEST_USE_LAUNCHERS_DEFAULT in your ctest -S script, too.  Then, as
-# long as your CMakeLists uses include(CTest) or
-# include(CTestUseLaunchers), it will use the value of the ENV variable
-# to initialize a CTEST_USE_LAUNCHERS cache variable.  This cache
-# variable initialization only occurs if CTEST_USE_LAUNCHERS is not
-# already defined. If CTEST_USE_LAUNCHERS is on in a ctest -S script
-# the ctest_configure command will add -DCTEST_USE_LAUNCHERS:BOOL=TRUE
-# to the cmake command used to configure the project.
+#[=======================================================================[.rst:
+CTestUseLaunchers
+-----------------
+
+Set the RULE_LAUNCH_* global properties when CTEST_USE_LAUNCHERS is on.
+
+CTestUseLaunchers is automatically included when you include(CTest).
+However, it is split out into its own module file so projects can use
+the CTEST_USE_LAUNCHERS functionality independently.
+
+To use launchers, set CTEST_USE_LAUNCHERS to ON in a ctest -S
+dashboard script, and then also set it in the cache of the configured
+project.  Both cmake and ctest need to know the value of it for the
+launchers to work properly.  CMake needs to know in order to generate
+proper build rules, and ctest, in order to produce the proper error
+and warning analysis.
+
+For convenience, you may set the ENV variable
+CTEST_USE_LAUNCHERS_DEFAULT in your ctest -S script, too.  Then, as
+long as your CMakeLists uses include(CTest) or
+include(CTestUseLaunchers), it will use the value of the ENV variable
+to initialize a CTEST_USE_LAUNCHERS cache variable.  This cache
+variable initialization only occurs if CTEST_USE_LAUNCHERS is not
+already defined. If CTEST_USE_LAUNCHERS is on in a ctest -S script
+the ctest_configure command will add -DCTEST_USE_LAUNCHERS:BOOL=TRUE
+to the cmake command used to configure the project.
+#]=======================================================================]
 
 if(NOT DEFINED CTEST_USE_LAUNCHERS AND DEFINED ENV{CTEST_USE_LAUNCHERS_DEFAULT})
   set(CTEST_USE_LAUNCHERS "$ENV{CTEST_USE_LAUNCHERS_DEFAULT}"
diff --git a/Modules/CheckCXXSymbolExists.cmake b/Modules/CheckCXXSymbolExists.cmake
index ce23ffd..d067001 100644
--- a/Modules/CheckCXXSymbolExists.cmake
+++ b/Modules/CheckCXXSymbolExists.cmake
@@ -1,41 +1,42 @@
 # Distributed under the OSI-approved BSD 3-Clause License.  See accompanying
 # file Copyright.txt or https://cmake.org/licensing for details.
 
-#.rst:
-# CheckCXXSymbolExists
-# --------------------
-#
-# Check if a symbol exists as a function, variable, or macro in C++
-#
-# .. code-block:: cmake
-#
-#   CHECK_CXX_SYMBOL_EXISTS(<symbol> <files> <variable>)
-#
-# Check that the ``<symbol>`` is available after including given header
-# ``<files>`` and store the result in a ``<variable>``.  Specify the list of
-# files in one argument as a semicolon-separated list.
-# CHECK_CXX_SYMBOL_EXISTS() can be used to check in C++ files, as
-# opposed to CHECK_SYMBOL_EXISTS(), which works only for C.
-#
-# If the header files define the symbol as a macro it is considered
-# available and assumed to work.  If the header files declare the symbol
-# as a function or variable then the symbol must also be available for
-# linking.  If the symbol is a type or enum value it will not be
-# recognized (consider using CheckTypeSize or CheckCSourceCompiles).
-#
-# The following variables may be set before calling this macro to modify
-# the way the check is run:
-#
-# ``CMAKE_REQUIRED_FLAGS``
-#    string of compile command line flags
-# ``CMAKE_REQUIRED_DEFINITIONS``
-#    list of macros to define (-DFOO=bar)
-# ``CMAKE_REQUIRED_INCLUDES``
-#    list of include directories
-# ``CMAKE_REQUIRED_LIBRARIES``
-#    list of libraries to link
-# ``CMAKE_REQUIRED_QUIET``
-#    execute quietly without messages
+#[=======================================================================[.rst:
+CheckCXXSymbolExists
+--------------------
+
+Check if a symbol exists as a function, variable, or macro in C++
+
+.. code-block:: cmake
+
+  CHECK_CXX_SYMBOL_EXISTS(<symbol> <files> <variable>)
+
+Check that the ``<symbol>`` is available after including given header
+``<files>`` and store the result in a ``<variable>``.  Specify the list of
+files in one argument as a semicolon-separated list.
+CHECK_CXX_SYMBOL_EXISTS() can be used to check in C++ files, as
+opposed to CHECK_SYMBOL_EXISTS(), which works only for C.
+
+If the header files define the symbol as a macro it is considered
+available and assumed to work.  If the header files declare the symbol
+as a function or variable then the symbol must also be available for
+linking.  If the symbol is a type or enum value it will not be
+recognized (consider using CheckTypeSize or CheckCSourceCompiles).
+
+The following variables may be set before calling this macro to modify
+the way the check is run:
+
+``CMAKE_REQUIRED_FLAGS``
+   string of compile command line flags
+``CMAKE_REQUIRED_DEFINITIONS``
+   list of macros to define (-DFOO=bar)
+``CMAKE_REQUIRED_INCLUDES``
+   list of include directories
+``CMAKE_REQUIRED_LIBRARIES``
+   list of libraries to link
+``CMAKE_REQUIRED_QUIET``
+   execute quietly without messages
+#]=======================================================================]
 
 include_guard(GLOBAL)
 include(CheckSymbolExists)
diff --git a/Modules/CheckFortranFunctionExists.cmake b/Modules/CheckFortranFunctionExists.cmake
index fbfa061..dc371aa 100644
--- a/Modules/CheckFortranFunctionExists.cmake
+++ b/Modules/CheckFortranFunctionExists.cmake
@@ -1,28 +1,29 @@
 # Distributed under the OSI-approved BSD 3-Clause License.  See accompanying
 # file Copyright.txt or https://cmake.org/licensing for details.
 
-#.rst:
-# CheckFortranFunctionExists
-# --------------------------
-#
-# :command:`Macro <macro>` which checks if a Fortran function exists.
-#
-# .. code-block:: cmake
-#
-#   CHECK_FORTRAN_FUNCTION_EXISTS(<function> <result>)
-#
-# where
-#
-# ``<function>``
-#   the name of the Fortran function
-# ``<result>``
-#   variable to store the result; will be created as an internal cache variable.
-#
-# The following variables may be set before calling this macro to modify
-# the way the check is run:
-#
-# ``CMAKE_REQUIRED_LIBRARIES``
-#   list of libraries to link
+#[=======================================================================[.rst:
+CheckFortranFunctionExists
+--------------------------
+
+:command:`Macro <macro>` which checks if a Fortran function exists.
+
+.. code-block:: cmake
+
+  CHECK_FORTRAN_FUNCTION_EXISTS(<function> <result>)
+
+where
+
+``<function>``
+  the name of the Fortran function
+``<result>``
+  variable to store the result; will be created as an internal cache variable.
+
+The following variables may be set before calling this macro to modify
+the way the check is run:
+
+``CMAKE_REQUIRED_LIBRARIES``
+  list of libraries to link
+#]=======================================================================]
 
 include_guard(GLOBAL)
 
diff --git a/Modules/CheckFunctionExists.cmake b/Modules/CheckFunctionExists.cmake
index 45f7a6b..cbec739 100644
--- a/Modules/CheckFunctionExists.cmake
+++ b/Modules/CheckFunctionExists.cmake
@@ -1,47 +1,48 @@
 # Distributed under the OSI-approved BSD 3-Clause License.  See accompanying
 # file Copyright.txt or https://cmake.org/licensing for details.
 
-#.rst:
-# CheckFunctionExists
-# -------------------
-#
-# Check if a C function can be linked
-#
-# .. code-block:: cmake
-#
-#   check_function_exists(<function> <variable>)
-#
-# Checks that the ``<function>`` is provided by libraries on the system and store
-# the result in a ``<variable>``, which will be created as an internal
-# cache variable.
-#
-# The following variables may be set before calling this macro to modify the
-# way the check is run:
-#
-# ``CMAKE_REQUIRED_FLAGS``
-#   string of compile command line flags
-# ``CMAKE_REQUIRED_DEFINITIONS``
-#   list of macros to define (-DFOO=bar)
-# ``CMAKE_REQUIRED_INCLUDES``
-#   list of include directories
-# ``CMAKE_REQUIRED_LIBRARIES``
-#   list of libraries to link
-# ``CMAKE_REQUIRED_QUIET``
-#   execute quietly without messages
-#
-# .. note::
-#
-#   Prefer using :Module:`CheckSymbolExists` instead of this module,
-#   for the following reasons:
-#
-#   * ``check_function_exists()`` can't detect functions that are inlined
-#     in headers or specified as a macro.
-#
-#   * ``check_function_exists()`` can't detect anything in the 32-bit
-#     versions of the Win32 API, because of a mismatch in calling conventions.
-#
-#   * ``check_function_exists()`` only verifies linking, it does not verify
-#     that the function is declared in system headers.
+#[=======================================================================[.rst:
+CheckFunctionExists
+-------------------
+
+Check if a C function can be linked
+
+.. code-block:: cmake
+
+  check_function_exists(<function> <variable>)
+
+Checks that the ``<function>`` is provided by libraries on the system and store
+the result in a ``<variable>``, which will be created as an internal
+cache variable.
+
+The following variables may be set before calling this macro to modify the
+way the check is run:
+
+``CMAKE_REQUIRED_FLAGS``
+  string of compile command line flags
+``CMAKE_REQUIRED_DEFINITIONS``
+  list of macros to define (-DFOO=bar)
+``CMAKE_REQUIRED_INCLUDES``
+  list of include directories
+``CMAKE_REQUIRED_LIBRARIES``
+  list of libraries to link
+``CMAKE_REQUIRED_QUIET``
+  execute quietly without messages
+
+.. note::
+
+  Prefer using :Module:`CheckSymbolExists` instead of this module,
+  for the following reasons:
+
+  * ``check_function_exists()`` can't detect functions that are inlined
+    in headers or specified as a macro.
+
+  * ``check_function_exists()`` can't detect anything in the 32-bit
+    versions of the Win32 API, because of a mismatch in calling conventions.
+
+  * ``check_function_exists()`` only verifies linking, it does not verify
+    that the function is declared in system headers.
+#]=======================================================================]
 
 include_guard(GLOBAL)
 
diff --git a/Modules/CheckIncludeFile.cmake b/Modules/CheckIncludeFile.cmake
index 24bc349..87dac4f 100644
--- a/Modules/CheckIncludeFile.cmake
+++ b/Modules/CheckIncludeFile.cmake
@@ -1,40 +1,41 @@
 # Distributed under the OSI-approved BSD 3-Clause License.  See accompanying
 # file Copyright.txt or https://cmake.org/licensing for details.
 
-#.rst:
-# CheckIncludeFile
-# ----------------
-#
-# Provides a macro to check if a header file can be included in ``C``.
-#
-# .. command:: CHECK_INCLUDE_FILE
-#
-#   ::
-#
-#     CHECK_INCLUDE_FILE(<include> <variable> [<flags>])
-#
-#   Check if the given ``<include>`` file may be included in a ``C``
-#   source file and store the result in an internal cache entry named
-#   ``<variable>``.  The optional third argument may be used to add
-#   compilation flags to the check (or use ``CMAKE_REQUIRED_FLAGS`` below).
-#
-# The following variables may be set before calling this macro to modify
-# the way the check is run:
-#
-# ``CMAKE_REQUIRED_FLAGS``
-#   string of compile command line flags
-# ``CMAKE_REQUIRED_DEFINITIONS``
-#   list of macros to define (-DFOO=bar)
-# ``CMAKE_REQUIRED_INCLUDES``
-#   list of include directories
-# ``CMAKE_REQUIRED_LIBRARIES``
-#   A list of libraries to link.  See policy :policy:`CMP0075`.
-# ``CMAKE_REQUIRED_QUIET``
-#   execute quietly without messages
-#
-# See the :module:`CheckIncludeFiles` module to check for multiple headers
-# at once.  See the :module:`CheckIncludeFileCXX` module to check for headers
-# using the ``CXX`` language.
+#[=======================================================================[.rst:
+CheckIncludeFile
+----------------
+
+Provides a macro to check if a header file can be included in ``C``.
+
+.. command:: CHECK_INCLUDE_FILE
+
+  ::
+
+    CHECK_INCLUDE_FILE(<include> <variable> [<flags>])
+
+  Check if the given ``<include>`` file may be included in a ``C``
+  source file and store the result in an internal cache entry named
+  ``<variable>``.  The optional third argument may be used to add
+  compilation flags to the check (or use ``CMAKE_REQUIRED_FLAGS`` below).
+
+The following variables may be set before calling this macro to modify
+the way the check is run:
+
+``CMAKE_REQUIRED_FLAGS``
+  string of compile command line flags
+``CMAKE_REQUIRED_DEFINITIONS``
+  list of macros to define (-DFOO=bar)
+``CMAKE_REQUIRED_INCLUDES``
+  list of include directories
+``CMAKE_REQUIRED_LIBRARIES``
+  A list of libraries to link.  See policy :policy:`CMP0075`.
+``CMAKE_REQUIRED_QUIET``
+  execute quietly without messages
+
+See the :module:`CheckIncludeFiles` module to check for multiple headers
+at once.  See the :module:`CheckIncludeFileCXX` module to check for headers
+using the ``CXX`` language.
+#]=======================================================================]
 
 include_guard(GLOBAL)
 
diff --git a/Modules/CheckIncludeFileCXX.cmake b/Modules/CheckIncludeFileCXX.cmake
index f13d983..42b5eaf 100644
--- a/Modules/CheckIncludeFileCXX.cmake
+++ b/Modules/CheckIncludeFileCXX.cmake
@@ -1,39 +1,40 @@
 # Distributed under the OSI-approved BSD 3-Clause License.  See accompanying
 # file Copyright.txt or https://cmake.org/licensing for details.
 
-#.rst:
-# CheckIncludeFileCXX
-# -------------------
-#
-# Provides a macro to check if a header file can be included in ``CXX``.
-#
-# .. command:: CHECK_INCLUDE_FILE_CXX
-#
-#   ::
-#
-#     CHECK_INCLUDE_FILE_CXX(<include> <variable> [<flags>])
-#
-#   Check if the given ``<include>`` file may be included in a ``CXX``
-#   source file and store the result in an internal cache entry named
-#   ``<variable>``.  The optional third argument may be used to add
-#   compilation flags to the check (or use ``CMAKE_REQUIRED_FLAGS`` below).
-#
-# The following variables may be set before calling this macro to modify
-# the way the check is run:
-#
-# ``CMAKE_REQUIRED_FLAGS``
-#   string of compile command line flags
-# ``CMAKE_REQUIRED_DEFINITIONS``
-#   list of macros to define (-DFOO=bar)
-# ``CMAKE_REQUIRED_INCLUDES``
-#   list of include directories
-# ``CMAKE_REQUIRED_LIBRARIES``
-#   A list of libraries to link.  See policy :policy:`CMP0075`.
-# ``CMAKE_REQUIRED_QUIET``
-#   execute quietly without messages
-#
-# See modules :module:`CheckIncludeFile` and :module:`CheckIncludeFiles`
-# to check for one or more ``C`` headers.
+#[=======================================================================[.rst:
+CheckIncludeFileCXX
+-------------------
+
+Provides a macro to check if a header file can be included in ``CXX``.
+
+.. command:: CHECK_INCLUDE_FILE_CXX
+
+  ::
+
+    CHECK_INCLUDE_FILE_CXX(<include> <variable> [<flags>])
+
+  Check if the given ``<include>`` file may be included in a ``CXX``
+  source file and store the result in an internal cache entry named
+  ``<variable>``.  The optional third argument may be used to add
+  compilation flags to the check (or use ``CMAKE_REQUIRED_FLAGS`` below).
+
+The following variables may be set before calling this macro to modify
+the way the check is run:
+
+``CMAKE_REQUIRED_FLAGS``
+  string of compile command line flags
+``CMAKE_REQUIRED_DEFINITIONS``
+  list of macros to define (-DFOO=bar)
+``CMAKE_REQUIRED_INCLUDES``
+  list of include directories
+``CMAKE_REQUIRED_LIBRARIES``
+  A list of libraries to link.  See policy :policy:`CMP0075`.
+``CMAKE_REQUIRED_QUIET``
+  execute quietly without messages
+
+See modules :module:`CheckIncludeFile` and :module:`CheckIncludeFiles`
+to check for one or more ``C`` headers.
+#]=======================================================================]
 
 include_guard(GLOBAL)
 
diff --git a/Modules/CheckIncludeFiles.cmake b/Modules/CheckIncludeFiles.cmake
index c689f05..b303260 100644
--- a/Modules/CheckIncludeFiles.cmake
+++ b/Modules/CheckIncludeFiles.cmake
@@ -1,45 +1,46 @@
 # Distributed under the OSI-approved BSD 3-Clause License.  See accompanying
 # file Copyright.txt or https://cmake.org/licensing for details.
 
-#.rst:
-# CheckIncludeFiles
-# -----------------
-#
-# Provides a macro to check if a list of one or more header files can
-# be included together.
-#
-# .. command:: CHECK_INCLUDE_FILES
-#
-#   ::
-#
-#     CHECK_INCLUDE_FILES("<includes>" <variable> [LANGUAGE <language>])
-#
-#   Check if the given ``<includes>`` list may be included together
-#   in a source file and store the result in an internal cache
-#   entry named ``<variable>``.  Specify the ``<includes>`` argument
-#   as a :ref:`;-list <CMake Language Lists>` of header file names.
-#
-# If LANGUAGE is set, the specified compiler will be used to perform the
-# check. Acceptable values are ``C`` and ``CXX``. If not set, the C compiler
-# will be used if enabled. If the C compiler is not enabled, the C++
-# compiler will be used if enabled.
-#
-# The following variables may be set before calling this macro to modify
-# the way the check is run:
-#
-# ``CMAKE_REQUIRED_FLAGS``
-#   string of compile command line flags
-# ``CMAKE_REQUIRED_DEFINITIONS``
-#   list of macros to define (-DFOO=bar)
-# ``CMAKE_REQUIRED_INCLUDES``
-#   list of include directories
-# ``CMAKE_REQUIRED_LIBRARIES``
-#   A list of libraries to link.  See policy :policy:`CMP0075`.
-# ``CMAKE_REQUIRED_QUIET``
-#   execute quietly without messages
-#
-# See modules :module:`CheckIncludeFile` and :module:`CheckIncludeFileCXX`
-# to check for a single header file in ``C`` or ``CXX`` languages.
+#[=======================================================================[.rst:
+CheckIncludeFiles
+-----------------
+
+Provides a macro to check if a list of one or more header files can
+be included together.
+
+.. command:: CHECK_INCLUDE_FILES
+
+  ::
+
+    CHECK_INCLUDE_FILES("<includes>" <variable> [LANGUAGE <language>])
+
+  Check if the given ``<includes>`` list may be included together
+  in a source file and store the result in an internal cache
+  entry named ``<variable>``.  Specify the ``<includes>`` argument
+  as a :ref:`;-list <CMake Language Lists>` of header file names.
+
+If LANGUAGE is set, the specified compiler will be used to perform the
+check. Acceptable values are ``C`` and ``CXX``. If not set, the C compiler
+will be used if enabled. If the C compiler is not enabled, the C++
+compiler will be used if enabled.
+
+The following variables may be set before calling this macro to modify
+the way the check is run:
+
+``CMAKE_REQUIRED_FLAGS``
+  string of compile command line flags
+``CMAKE_REQUIRED_DEFINITIONS``
+  list of macros to define (-DFOO=bar)
+``CMAKE_REQUIRED_INCLUDES``
+  list of include directories
+``CMAKE_REQUIRED_LIBRARIES``
+  A list of libraries to link.  See policy :policy:`CMP0075`.
+``CMAKE_REQUIRED_QUIET``
+  execute quietly without messages
+
+See modules :module:`CheckIncludeFile` and :module:`CheckIncludeFileCXX`
+to check for a single header file in ``C`` or ``CXX`` languages.
+#]=======================================================================]
 
 include_guard(GLOBAL)
 
diff --git a/Modules/CheckLanguage.cmake b/Modules/CheckLanguage.cmake
index ce92bfe..efa88bd 100644
--- a/Modules/CheckLanguage.cmake
+++ b/Modules/CheckLanguage.cmake
@@ -1,35 +1,36 @@
 # Distributed under the OSI-approved BSD 3-Clause License.  See accompanying
 # file Copyright.txt or https://cmake.org/licensing for details.
 
-#.rst:
-# CheckLanguage
-# -------------
-#
-# Check if a language can be enabled
-#
-# Usage:
-#
-# ::
-#
-#   check_language(<lang>)
-#
-# where <lang> is a language that may be passed to enable_language()
-# such as "Fortran".  If CMAKE_<lang>_COMPILER is already defined the
-# check does nothing.  Otherwise it tries enabling the language in a
-# test project.  The result is cached in CMAKE_<lang>_COMPILER as the
-# compiler that was found, or NOTFOUND if the language cannot be
-# enabled.
-#
-# Example:
-#
-# ::
-#
-#   check_language(Fortran)
-#   if(CMAKE_Fortran_COMPILER)
-#     enable_language(Fortran)
-#   else()
-#     message(STATUS "No Fortran support")
-#   endif()
+#[=======================================================================[.rst:
+CheckLanguage
+-------------
+
+Check if a language can be enabled
+
+Usage:
+
+::
+
+  check_language(<lang>)
+
+where <lang> is a language that may be passed to enable_language()
+such as "Fortran".  If CMAKE_<lang>_COMPILER is already defined the
+check does nothing.  Otherwise it tries enabling the language in a
+test project.  The result is cached in CMAKE_<lang>_COMPILER as the
+compiler that was found, or NOTFOUND if the language cannot be
+enabled.
+
+Example:
+
+::
+
+  check_language(Fortran)
+  if(CMAKE_Fortran_COMPILER)
+    enable_language(Fortran)
+  else()
+    message(STATUS "No Fortran support")
+  endif()
+#]=======================================================================]
 
 include_guard(GLOBAL)
 
diff --git a/Modules/CheckLibraryExists.cmake b/Modules/CheckLibraryExists.cmake
index 487cc59..428a6b0 100644
--- a/Modules/CheckLibraryExists.cmake
+++ b/Modules/CheckLibraryExists.cmake
@@ -1,33 +1,34 @@
 # Distributed under the OSI-approved BSD 3-Clause License.  See accompanying
 # file Copyright.txt or https://cmake.org/licensing for details.
 
-#.rst:
-# CheckLibraryExists
-# ------------------
-#
-# Check if the function exists.
-#
-# CHECK_LIBRARY_EXISTS (LIBRARY FUNCTION LOCATION VARIABLE)
-#
-# ::
-#
-#   LIBRARY  - the name of the library you are looking for
-#   FUNCTION - the name of the function
-#   LOCATION - location where the library should be found
-#   VARIABLE - variable to store the result
-#              Will be created as an internal cache variable.
-#
-#
-#
-# The following variables may be set before calling this macro to modify
-# the way the check is run:
-#
-# ::
-#
-#   CMAKE_REQUIRED_FLAGS = string of compile command line flags
-#   CMAKE_REQUIRED_DEFINITIONS = list of macros to define (-DFOO=bar)
-#   CMAKE_REQUIRED_LIBRARIES = list of libraries to link
-#   CMAKE_REQUIRED_QUIET = execute quietly without messages
+#[=======================================================================[.rst:
+CheckLibraryExists
+------------------
+
+Check if the function exists.
+
+CHECK_LIBRARY_EXISTS (LIBRARY FUNCTION LOCATION VARIABLE)
+
+::
+
+  LIBRARY  - the name of the library you are looking for
+  FUNCTION - the name of the function
+  LOCATION - location where the library should be found
+  VARIABLE - variable to store the result
+             Will be created as an internal cache variable.
+
+
+
+The following variables may be set before calling this macro to modify
+the way the check is run:
+
+::
+
+  CMAKE_REQUIRED_FLAGS = string of compile command line flags
+  CMAKE_REQUIRED_DEFINITIONS = list of macros to define (-DFOO=bar)
+  CMAKE_REQUIRED_LIBRARIES = list of libraries to link
+  CMAKE_REQUIRED_QUIET = execute quietly without messages
+#]=======================================================================]
 
 include_guard(GLOBAL)
 
diff --git a/Modules/CheckPrototypeDefinition.cmake b/Modules/CheckPrototypeDefinition.cmake
index dde0775..b379ec4 100644
--- a/Modules/CheckPrototypeDefinition.cmake
+++ b/Modules/CheckPrototypeDefinition.cmake
@@ -1,43 +1,44 @@
 # Distributed under the OSI-approved BSD 3-Clause License.  See accompanying
 # file Copyright.txt or https://cmake.org/licensing for details.
 
-#.rst:
-# CheckPrototypeDefinition
-# ------------------------
-#
-# Check if the prototype we expect is correct.
-#
-# check_prototype_definition(FUNCTION PROTOTYPE RETURN HEADER VARIABLE)
-#
-# ::
-#
-#   FUNCTION - The name of the function (used to check if prototype exists)
-#   PROTOTYPE- The prototype to check.
-#   RETURN - The return value of the function.
-#   HEADER - The header files required.
-#   VARIABLE - The variable to store the result.
-#              Will be created as an internal cache variable.
-#
-# Example:
-#
-# ::
-#
-#   check_prototype_definition(getpwent_r
-#    "struct passwd *getpwent_r(struct passwd *src, char *buf, int buflen)"
-#    "NULL"
-#    "unistd.h;pwd.h"
-#    SOLARIS_GETPWENT_R)
-#
-# The following variables may be set before calling this macro to modify
-# the way the check is run:
-#
-# ::
-#
-#   CMAKE_REQUIRED_FLAGS = string of compile command line flags
-#   CMAKE_REQUIRED_DEFINITIONS = list of macros to define (-DFOO=bar)
-#   CMAKE_REQUIRED_INCLUDES = list of include directories
-#   CMAKE_REQUIRED_LIBRARIES = list of libraries to link
-#   CMAKE_REQUIRED_QUIET = execute quietly without messages
+#[=======================================================================[.rst:
+CheckPrototypeDefinition
+------------------------
+
+Check if the prototype we expect is correct.
+
+check_prototype_definition(FUNCTION PROTOTYPE RETURN HEADER VARIABLE)
+
+::
+
+  FUNCTION - The name of the function (used to check if prototype exists)
+  PROTOTYPE- The prototype to check.
+  RETURN - The return value of the function.
+  HEADER - The header files required.
+  VARIABLE - The variable to store the result.
+             Will be created as an internal cache variable.
+
+Example:
+
+::
+
+  check_prototype_definition(getpwent_r
+   "struct passwd *getpwent_r(struct passwd *src, char *buf, int buflen)"
+   "NULL"
+   "unistd.h;pwd.h"
+   SOLARIS_GETPWENT_R)
+
+The following variables may be set before calling this macro to modify
+the way the check is run:
+
+::
+
+  CMAKE_REQUIRED_FLAGS = string of compile command line flags
+  CMAKE_REQUIRED_DEFINITIONS = list of macros to define (-DFOO=bar)
+  CMAKE_REQUIRED_INCLUDES = list of include directories
+  CMAKE_REQUIRED_LIBRARIES = list of libraries to link
+  CMAKE_REQUIRED_QUIET = execute quietly without messages
+#]=======================================================================]
 
 #
 
diff --git a/Modules/CheckStructHasMember.cmake b/Modules/CheckStructHasMember.cmake
index 8689a5c..e7c337c 100644
--- a/Modules/CheckStructHasMember.cmake
+++ b/Modules/CheckStructHasMember.cmake
@@ -1,42 +1,43 @@
 # Distributed under the OSI-approved BSD 3-Clause License.  See accompanying
 # file Copyright.txt or https://cmake.org/licensing for details.
 
-#.rst:
-# CheckStructHasMember
-# --------------------
-#
-# Check if the given struct or class has the specified member variable
-#
-# ::
-#
-#  CHECK_STRUCT_HAS_MEMBER(<struct> <member> <header> <variable>
-#                          [LANGUAGE <language>])
-#
-# ::
-#
-#   <struct> - the name of the struct or class you are interested in
-#   <member> - the member which existence you want to check
-#   <header> - the header(s) where the prototype should be declared
-#   <variable> - variable to store the result
-#   <language> - the compiler to use (C or CXX)
-#
-#
-#
-# The following variables may be set before calling this macro to modify
-# the way the check is run:
-#
-# ::
-#
-#   CMAKE_REQUIRED_FLAGS = string of compile command line flags
-#   CMAKE_REQUIRED_DEFINITIONS = list of macros to define (-DFOO=bar)
-#   CMAKE_REQUIRED_INCLUDES = list of include directories
-#   CMAKE_REQUIRED_LIBRARIES = list of libraries to link
-#   CMAKE_REQUIRED_QUIET = execute quietly without messages
-#
-#
-#
-# Example: CHECK_STRUCT_HAS_MEMBER("struct timeval" tv_sec sys/select.h
-# HAVE_TIMEVAL_TV_SEC LANGUAGE C)
+#[=======================================================================[.rst:
+CheckStructHasMember
+--------------------
+
+Check if the given struct or class has the specified member variable
+
+::
+
+ CHECK_STRUCT_HAS_MEMBER(<struct> <member> <header> <variable>
+                         [LANGUAGE <language>])
+
+::
+
+  <struct> - the name of the struct or class you are interested in
+  <member> - the member which existence you want to check
+  <header> - the header(s) where the prototype should be declared
+  <variable> - variable to store the result
+  <language> - the compiler to use (C or CXX)
+
+
+
+The following variables may be set before calling this macro to modify
+the way the check is run:
+
+::
+
+  CMAKE_REQUIRED_FLAGS = string of compile command line flags
+  CMAKE_REQUIRED_DEFINITIONS = list of macros to define (-DFOO=bar)
+  CMAKE_REQUIRED_INCLUDES = list of include directories
+  CMAKE_REQUIRED_LIBRARIES = list of libraries to link
+  CMAKE_REQUIRED_QUIET = execute quietly without messages
+
+
+
+Example: CHECK_STRUCT_HAS_MEMBER("struct timeval" tv_sec sys/select.h
+HAVE_TIMEVAL_TV_SEC LANGUAGE C)
+#]=======================================================================]
 
 include_guard(GLOBAL)
 include(CheckCSourceCompiles)
diff --git a/Modules/CheckTypeSize.cmake b/Modules/CheckTypeSize.cmake
index 2b5deec..2c53df9 100644
--- a/Modules/CheckTypeSize.cmake
+++ b/Modules/CheckTypeSize.cmake
@@ -1,72 +1,73 @@
 # Distributed under the OSI-approved BSD 3-Clause License.  See accompanying
 # file Copyright.txt or https://cmake.org/licensing for details.
 
-#.rst:
-# CheckTypeSize
-# -------------
-#
-# Check sizeof a type
-#
-# ::
-#
-#   CHECK_TYPE_SIZE(TYPE VARIABLE [BUILTIN_TYPES_ONLY]
-#                                 [LANGUAGE <language>])
-#
-# Check if the type exists and determine its size.  On return,
-# "HAVE_${VARIABLE}" holds the existence of the type, and "${VARIABLE}"
-# holds one of the following:
-#
-# ::
-#
-#    <size> = type has non-zero size <size>
-#    "0"    = type has arch-dependent size (see below)
-#    ""     = type does not exist
-#
-# Both ``HAVE_${VARIABLE}`` and ``${VARIABLE}`` will be created as internal
-# cache variables.
-#
-# Furthermore, the variable "${VARIABLE}_CODE" holds C preprocessor code
-# to define the macro "${VARIABLE}" to the size of the type, or leave
-# the macro undefined if the type does not exist.
-#
-# The variable "${VARIABLE}" may be "0" when CMAKE_OSX_ARCHITECTURES has
-# multiple architectures for building OS X universal binaries.  This
-# indicates that the type size varies across architectures.  In this
-# case "${VARIABLE}_CODE" contains C preprocessor tests mapping from
-# each architecture macro to the corresponding type size.  The list of
-# architecture macros is stored in "${VARIABLE}_KEYS", and the value for
-# each key is stored in "${VARIABLE}-${KEY}".
-#
-# If the BUILTIN_TYPES_ONLY option is not given, the macro checks for
-# headers <sys/types.h>, <stdint.h>, and <stddef.h>, and saves results
-# in HAVE_SYS_TYPES_H, HAVE_STDINT_H, and HAVE_STDDEF_H.  The type size
-# check automatically includes the available headers, thus supporting
-# checks of types defined in the headers.
-#
-# If LANGUAGE is set, the specified compiler will be used to perform the
-# check. Acceptable values are C and CXX
-#
-# Despite the name of the macro you may use it to check the size of more
-# complex expressions, too.  To check e.g.  for the size of a struct
-# member you can do something like this:
-#
-# ::
-#
-#   check_type_size("((struct something*)0)->member" SIZEOF_MEMBER)
-#
-#
-#
-# The following variables may be set before calling this macro to modify
-# the way the check is run:
-#
-# ::
-#
-#   CMAKE_REQUIRED_FLAGS = string of compile command line flags
-#   CMAKE_REQUIRED_DEFINITIONS = list of macros to define (-DFOO=bar)
-#   CMAKE_REQUIRED_INCLUDES = list of include directories
-#   CMAKE_REQUIRED_LIBRARIES = list of libraries to link
-#   CMAKE_REQUIRED_QUIET = execute quietly without messages
-#   CMAKE_EXTRA_INCLUDE_FILES = list of extra headers to include
+#[=======================================================================[.rst:
+CheckTypeSize
+-------------
+
+Check sizeof a type
+
+::
+
+  CHECK_TYPE_SIZE(TYPE VARIABLE [BUILTIN_TYPES_ONLY]
+                                [LANGUAGE <language>])
+
+Check if the type exists and determine its size.  On return,
+"HAVE_${VARIABLE}" holds the existence of the type, and "${VARIABLE}"
+holds one of the following:
+
+::
+
+   <size> = type has non-zero size <size>
+   "0"    = type has arch-dependent size (see below)
+   ""     = type does not exist
+
+Both ``HAVE_${VARIABLE}`` and ``${VARIABLE}`` will be created as internal
+cache variables.
+
+Furthermore, the variable "${VARIABLE}_CODE" holds C preprocessor code
+to define the macro "${VARIABLE}" to the size of the type, or leave
+the macro undefined if the type does not exist.
+
+The variable "${VARIABLE}" may be "0" when CMAKE_OSX_ARCHITECTURES has
+multiple architectures for building OS X universal binaries.  This
+indicates that the type size varies across architectures.  In this
+case "${VARIABLE}_CODE" contains C preprocessor tests mapping from
+each architecture macro to the corresponding type size.  The list of
+architecture macros is stored in "${VARIABLE}_KEYS", and the value for
+each key is stored in "${VARIABLE}-${KEY}".
+
+If the BUILTIN_TYPES_ONLY option is not given, the macro checks for
+headers <sys/types.h>, <stdint.h>, and <stddef.h>, and saves results
+in HAVE_SYS_TYPES_H, HAVE_STDINT_H, and HAVE_STDDEF_H.  The type size
+check automatically includes the available headers, thus supporting
+checks of types defined in the headers.
+
+If LANGUAGE is set, the specified compiler will be used to perform the
+check. Acceptable values are C and CXX
+
+Despite the name of the macro you may use it to check the size of more
+complex expressions, too.  To check e.g.  for the size of a struct
+member you can do something like this:
+
+::
+
+  check_type_size("((struct something*)0)->member" SIZEOF_MEMBER)
+
+
+
+The following variables may be set before calling this macro to modify
+the way the check is run:
+
+::
+
+  CMAKE_REQUIRED_FLAGS = string of compile command line flags
+  CMAKE_REQUIRED_DEFINITIONS = list of macros to define (-DFOO=bar)
+  CMAKE_REQUIRED_INCLUDES = list of include directories
+  CMAKE_REQUIRED_LIBRARIES = list of libraries to link
+  CMAKE_REQUIRED_QUIET = execute quietly without messages
+  CMAKE_EXTRA_INCLUDE_FILES = list of extra headers to include
+#]=======================================================================]
 
 include(CheckIncludeFile)
 include(CheckIncludeFileCXX)
diff --git a/Modules/CheckVariableExists.cmake b/Modules/CheckVariableExists.cmake
index ab456d1..f30165e 100644
--- a/Modules/CheckVariableExists.cmake
+++ b/Modules/CheckVariableExists.cmake
@@ -1,36 +1,37 @@
 # Distributed under the OSI-approved BSD 3-Clause License.  See accompanying
 # file Copyright.txt or https://cmake.org/licensing for details.
 
-#.rst:
-# CheckVariableExists
-# -------------------
-#
-# Check if the variable exists.
-#
-# ::
-#
-#   CHECK_VARIABLE_EXISTS(VAR VARIABLE)
-#
-#
-#
-# ::
-#
-#   VAR      - the name of the variable
-#   VARIABLE - variable to store the result
-#              Will be created as an internal cache variable.
-#
-#
-# This macro is only for C variables.
-#
-# The following variables may be set before calling this macro to modify
-# the way the check is run:
-#
-# ::
-#
-#   CMAKE_REQUIRED_FLAGS = string of compile command line flags
-#   CMAKE_REQUIRED_DEFINITIONS = list of macros to define (-DFOO=bar)
-#   CMAKE_REQUIRED_LIBRARIES = list of libraries to link
-#   CMAKE_REQUIRED_QUIET = execute quietly without messages
+#[=======================================================================[.rst:
+CheckVariableExists
+-------------------
+
+Check if the variable exists.
+
+::
+
+  CHECK_VARIABLE_EXISTS(VAR VARIABLE)
+
+
+
+::
+
+  VAR      - the name of the variable
+  VARIABLE - variable to store the result
+             Will be created as an internal cache variable.
+
+
+This macro is only for C variables.
+
+The following variables may be set before calling this macro to modify
+the way the check is run:
+
+::
+
+  CMAKE_REQUIRED_FLAGS = string of compile command line flags
+  CMAKE_REQUIRED_DEFINITIONS = list of macros to define (-DFOO=bar)
+  CMAKE_REQUIRED_LIBRARIES = list of libraries to link
+  CMAKE_REQUIRED_QUIET = execute quietly without messages
+#]=======================================================================]
 
 include_guard(GLOBAL)
 
diff --git a/Modules/Dart.cmake b/Modules/Dart.cmake
index e003cd5..154fe9d 100644
--- a/Modules/Dart.cmake
+++ b/Modules/Dart.cmake
@@ -1,27 +1,28 @@
 # Distributed under the OSI-approved BSD 3-Clause License.  See accompanying
 # file Copyright.txt or https://cmake.org/licensing for details.
 
-#.rst:
-# Dart
-# ----
-#
-# Configure a project for testing with CTest or old Dart Tcl Client
-#
-# This file is the backwards-compatibility version of the CTest module.
-# It supports using the old Dart 1 Tcl client for driving dashboard
-# submissions as well as testing with CTest.  This module should be
-# included in the CMakeLists.txt file at the top of a project.  Typical
-# usage:
-#
-# ::
-#
-#   include(Dart)
-#   if(BUILD_TESTING)
-#     # ... testing related CMake code ...
-#   endif()
-#
-# The BUILD_TESTING option is created by the Dart module to determine
-# whether testing support should be enabled.  The default is ON.
+#[=======================================================================[.rst:
+Dart
+----
+
+Configure a project for testing with CTest or old Dart Tcl Client
+
+This file is the backwards-compatibility version of the CTest module.
+It supports using the old Dart 1 Tcl client for driving dashboard
+submissions as well as testing with CTest.  This module should be
+included in the CMakeLists.txt file at the top of a project.  Typical
+usage:
+
+::
+
+  include(Dart)
+  if(BUILD_TESTING)
+    # ... testing related CMake code ...
+  endif()
+
+The BUILD_TESTING option is created by the Dart module to determine
+whether testing support should be enabled.  The default is ON.
+#]=======================================================================]
 
 # This file configures a project to use the Dart testing/dashboard process.
 # It is broken into 3 sections.
diff --git a/Modules/Documentation.cmake b/Modules/Documentation.cmake
index 6e21249..229b8ab 100644
--- a/Modules/Documentation.cmake
+++ b/Modules/Documentation.cmake
@@ -1,14 +1,15 @@
 # Distributed under the OSI-approved BSD 3-Clause License.  See accompanying
 # file Copyright.txt or https://cmake.org/licensing for details.
 
-#.rst:
-# Documentation
-# -------------
-#
-# DocumentationVTK.cmake
-#
-# This file provides support for the VTK documentation framework.  It
-# relies on several tools (Doxygen, Perl, etc).
+#[=======================================================================[.rst:
+Documentation
+-------------
+
+DocumentationVTK.cmake
+
+This file provides support for the VTK documentation framework.  It
+relies on several tools (Doxygen, Perl, etc).
+#]=======================================================================]
 
 #
 # Build the documentation ?
diff --git a/Modules/FindALSA.cmake b/Modules/FindALSA.cmake
index c9cfd60..f27d7fe 100644
--- a/Modules/FindALSA.cmake
+++ b/Modules/FindALSA.cmake
@@ -1,44 +1,45 @@
 # Distributed under the OSI-approved BSD 3-Clause License.  See accompanying
 # file Copyright.txt or https://cmake.org/licensing for details.
 
-#.rst:
-# FindALSA
-# --------
-#
-# Find alsa
-#
-# Find the alsa libraries (asound)
-#
-# IMPORTED Targets
-# ^^^^^^^^^^^^^^^^
-#
-# This module defines :prop_tgt:`IMPORTED` target ``ALSA::ALSA``, if
-# ALSA has been found.
-#
-# Result Variables
-# ^^^^^^^^^^^^^^^^
-#
-# This module defines the following variables:
-#
-# ``ALSA_FOUND``
-#   True if ALSA_INCLUDE_DIR & ALSA_LIBRARY are found
-#
-# ``ALSA_LIBRARIES``
-#   List of libraries when using ALSA.
-#
-# ``ALSA_INCLUDE_DIRS``
-#   Where to find the ALSA headers.
-#
-# Cache variables
-# ^^^^^^^^^^^^^^^
-#
-# The following cache variables may also be set:
-#
-# ``ALSA_INCLUDE_DIR``
-#   the ALSA include directory
-#
-# ``ALSA_LIBRARY``
-#   the absolute path of the asound library
+#[=======================================================================[.rst:
+FindALSA
+--------
+
+Find alsa
+
+Find the alsa libraries (asound)
+
+IMPORTED Targets
+^^^^^^^^^^^^^^^^
+
+This module defines :prop_tgt:`IMPORTED` target ``ALSA::ALSA``, if
+ALSA has been found.
+
+Result Variables
+^^^^^^^^^^^^^^^^
+
+This module defines the following variables:
+
+``ALSA_FOUND``
+  True if ALSA_INCLUDE_DIR & ALSA_LIBRARY are found
+
+``ALSA_LIBRARIES``
+  List of libraries when using ALSA.
+
+``ALSA_INCLUDE_DIRS``
+  Where to find the ALSA headers.
+
+Cache variables
+^^^^^^^^^^^^^^^
+
+The following cache variables may also be set:
+
+``ALSA_INCLUDE_DIR``
+  the ALSA include directory
+
+``ALSA_LIBRARY``
+  the absolute path of the asound library
+#]=======================================================================]
 
 find_path(ALSA_INCLUDE_DIR NAMES alsa/asoundlib.h
           DOC "The ALSA (asound) include directory"
diff --git a/Modules/FindASPELL.cmake b/Modules/FindASPELL.cmake
index 6944ac1..c2d29e2 100644
--- a/Modules/FindASPELL.cmake
+++ b/Modules/FindASPELL.cmake
@@ -1,21 +1,22 @@
 # Distributed under the OSI-approved BSD 3-Clause License.  See accompanying
 # file Copyright.txt or https://cmake.org/licensing for details.
 
-#.rst:
-# FindASPELL
-# ----------
-#
-# Try to find ASPELL
-#
-# Once done this will define
-#
-# ::
-#
-#   ASPELL_FOUND - system has ASPELL
-#   ASPELL_EXECUTABLE - the ASPELL executable
-#   ASPELL_INCLUDE_DIR - the ASPELL include directory
-#   ASPELL_LIBRARIES - The libraries needed to use ASPELL
-#   ASPELL_DEFINITIONS - Compiler switches required for using ASPELL
+#[=======================================================================[.rst:
+FindASPELL
+----------
+
+Try to find ASPELL
+
+Once done this will define
+
+::
+
+  ASPELL_FOUND - system has ASPELL
+  ASPELL_EXECUTABLE - the ASPELL executable
+  ASPELL_INCLUDE_DIR - the ASPELL include directory
+  ASPELL_LIBRARIES - The libraries needed to use ASPELL
+  ASPELL_DEFINITIONS - Compiler switches required for using ASPELL
+#]=======================================================================]
 
 find_path(ASPELL_INCLUDE_DIR aspell.h )
 
diff --git a/Modules/FindAVIFile.cmake b/Modules/FindAVIFile.cmake
index 2df29ca..c12512f 100644
--- a/Modules/FindAVIFile.cmake
+++ b/Modules/FindAVIFile.cmake
@@ -1,23 +1,24 @@
 # Distributed under the OSI-approved BSD 3-Clause License.  See accompanying
 # file Copyright.txt or https://cmake.org/licensing for details.
 
-#.rst:
-# FindAVIFile
-# -----------
-#
-# Locate AVIFILE library and include paths
-#
-# AVIFILE (http://avifile.sourceforge.net/)is a set of libraries for
-# i386 machines to use various AVI codecs.  Support is limited beyond
-# Linux.  Windows provides native AVI support, and so doesn't need this
-# library.  This module defines
-#
-# ::
-#
-#   AVIFILE_INCLUDE_DIR, where to find avifile.h , etc.
-#   AVIFILE_LIBRARIES, the libraries to link against
-#   AVIFILE_DEFINITIONS, definitions to use when compiling
-#   AVIFILE_FOUND, If false, don't try to use AVIFILE
+#[=======================================================================[.rst:
+FindAVIFile
+-----------
+
+Locate AVIFILE library and include paths
+
+AVIFILE (http://avifile.sourceforge.net/)is a set of libraries for
+i386 machines to use various AVI codecs.  Support is limited beyond
+Linux.  Windows provides native AVI support, and so doesn't need this
+library.  This module defines
+
+::
+
+  AVIFILE_INCLUDE_DIR, where to find avifile.h , etc.
+  AVIFILE_LIBRARIES, the libraries to link against
+  AVIFILE_DEFINITIONS, definitions to use when compiling
+  AVIFILE_FOUND, If false, don't try to use AVIFILE
+#]=======================================================================]
 
 if (UNIX)
 
diff --git a/Modules/FindArmadillo.cmake b/Modules/FindArmadillo.cmake
index 95f0c56..ce76c99 100644
--- a/Modules/FindArmadillo.cmake
+++ b/Modules/FindArmadillo.cmake
@@ -1,35 +1,36 @@
 # Distributed under the OSI-approved BSD 3-Clause License.  See accompanying
 # file Copyright.txt or https://cmake.org/licensing for details.
 
-#.rst:
-# FindArmadillo
-# -------------
-#
-# Find Armadillo
-#
-# Find the Armadillo C++ library
-#
-# Using Armadillo:
-#
-# ::
-#
-#   find_package(Armadillo REQUIRED)
-#   include_directories(${ARMADILLO_INCLUDE_DIRS})
-#   add_executable(foo foo.cc)
-#   target_link_libraries(foo ${ARMADILLO_LIBRARIES})
-#
-# This module sets the following variables:
-#
-# ::
-#
-#   ARMADILLO_FOUND - set to true if the library is found
-#   ARMADILLO_INCLUDE_DIRS - list of required include directories
-#   ARMADILLO_LIBRARIES - list of libraries to be linked
-#   ARMADILLO_VERSION_MAJOR - major version number
-#   ARMADILLO_VERSION_MINOR - minor version number
-#   ARMADILLO_VERSION_PATCH - patch version number
-#   ARMADILLO_VERSION_STRING - version number as a string (ex: "1.0.4")
-#   ARMADILLO_VERSION_NAME - name of the version (ex: "Antipodean Antileech")
+#[=======================================================================[.rst:
+FindArmadillo
+-------------
+
+Find Armadillo
+
+Find the Armadillo C++ library
+
+Using Armadillo:
+
+::
+
+  find_package(Armadillo REQUIRED)
+  include_directories(${ARMADILLO_INCLUDE_DIRS})
+  add_executable(foo foo.cc)
+  target_link_libraries(foo ${ARMADILLO_LIBRARIES})
+
+This module sets the following variables:
+
+::
+
+  ARMADILLO_FOUND - set to true if the library is found
+  ARMADILLO_INCLUDE_DIRS - list of required include directories
+  ARMADILLO_LIBRARIES - list of libraries to be linked
+  ARMADILLO_VERSION_MAJOR - major version number
+  ARMADILLO_VERSION_MINOR - minor version number
+  ARMADILLO_VERSION_PATCH - patch version number
+  ARMADILLO_VERSION_STRING - version number as a string (ex: "1.0.4")
+  ARMADILLO_VERSION_NAME - name of the version (ex: "Antipodean Antileech")
+#]=======================================================================]
 
 # UNIX paths are standard, no need to write.
 find_library(ARMADILLO_LIBRARY
diff --git a/Modules/FindBISON.cmake b/Modules/FindBISON.cmake
index 2000f7f..d59dc27 100644
--- a/Modules/FindBISON.cmake
+++ b/Modules/FindBISON.cmake
@@ -1,85 +1,86 @@
 # Distributed under the OSI-approved BSD 3-Clause License.  See accompanying
 # file Copyright.txt or https://cmake.org/licensing for details.
 
-#.rst:
-# FindBISON
-# ---------
-#
-# Find ``bison`` executable and provide a macro to generate custom build rules.
-#
-# The module defines the following variables:
-#
-# ``BISON_EXECUTABLE``
-#   path to the ``bison`` program
-#
-# ``BISON_VERSION``
-#   version of ``bison``
-#
-# ``BISON_FOUND``
-#   true if the program was found
-#
-# The minimum required version of ``bison`` can be specified using the
-# standard CMake syntax, e.g.  ``find_package(BISON 2.1.3)``.
-#
-# If ``bison`` is found, the module defines the macro::
-#
-#   BISON_TARGET(<Name> <YaccInput> <CodeOutput>
-#                [COMPILE_FLAGS <flags>]
-#                [DEFINES_FILE <file>]
-#                [VERBOSE [<file>]]
-#                [REPORT_FILE <file>]
-#                )
-#
-# which will create a custom rule to generate a parser.  ``<YaccInput>`` is
-# the path to a yacc file.  ``<CodeOutput>`` is the name of the source file
-# generated by bison.  A header file is also be generated, and contains
-# the token list.
-#
-# The options are:
-#
-# ``COMPILE_FLAGS <flags>``
-#   Specify flags to be added to the ``bison`` command line.
-#
-# ``DEFINES_FILE <file>``
-#   Specify a non-default header ``<file>`` to be generated by ``bison``.
-#
-# ``VERBOSE [<file>]``
-#   Tell ``bison`` to write a report file of the grammar and parser.
-#   If ``<file>`` is given, it specifies path the report file is copied to.
-#   ``[<file>]`` is left for backward compatibility of this module.
-#   Use ``VERBOSE REPORT_FILE <file>``.
-#
-# ``REPORT_FILE <file>``
-#   Specify a non-default report ``<file>``, if generated.
-#
-# The macro defines the following variables:
-#
-# ``BISON_<Name>_DEFINED``
-#   true is the macro ran successfully
-#
-# ``BISON_<Name>_INPUT``
-#   The input source file, an alias for <YaccInput>
-#
-# ``BISON_<Name>_OUTPUT_SOURCE``
-#   The source file generated by bison
-#
-# ``BISON_<Name>_OUTPUT_HEADER``
-#   The header file generated by bison
-#
-# ``BISON_<Name>_OUTPUTS``
-#   All files generated by bison including the source, the header and the report
-#
-# ``BISON_<Name>_COMPILE_FLAGS``
-#   Options used in the ``bison`` command line
-#
-# Example usage:
-#
-# .. code-block:: cmake
-#
-#   find_package(BISON)
-#   BISON_TARGET(MyParser parser.y ${CMAKE_CURRENT_BINARY_DIR}/parser.cpp
-#                DEFINES_FILE ${CMAKE_CURRENT_BINARY_DIR}/parser.h)
-#   add_executable(Foo main.cpp ${BISON_MyParser_OUTPUTS})
+#[=======================================================================[.rst:
+FindBISON
+---------
+
+Find ``bison`` executable and provide a macro to generate custom build rules.
+
+The module defines the following variables:
+
+``BISON_EXECUTABLE``
+  path to the ``bison`` program
+
+``BISON_VERSION``
+  version of ``bison``
+
+``BISON_FOUND``
+  true if the program was found
+
+The minimum required version of ``bison`` can be specified using the
+standard CMake syntax, e.g.  ``find_package(BISON 2.1.3)``.
+
+If ``bison`` is found, the module defines the macro::
+
+  BISON_TARGET(<Name> <YaccInput> <CodeOutput>
+               [COMPILE_FLAGS <flags>]
+               [DEFINES_FILE <file>]
+               [VERBOSE [<file>]]
+               [REPORT_FILE <file>]
+               )
+
+which will create a custom rule to generate a parser.  ``<YaccInput>`` is
+the path to a yacc file.  ``<CodeOutput>`` is the name of the source file
+generated by bison.  A header file is also be generated, and contains
+the token list.
+
+The options are:
+
+``COMPILE_FLAGS <flags>``
+  Specify flags to be added to the ``bison`` command line.
+
+``DEFINES_FILE <file>``
+  Specify a non-default header ``<file>`` to be generated by ``bison``.
+
+``VERBOSE [<file>]``
+  Tell ``bison`` to write a report file of the grammar and parser.
+  If ``<file>`` is given, it specifies path the report file is copied to.
+  ``[<file>]`` is left for backward compatibility of this module.
+  Use ``VERBOSE REPORT_FILE <file>``.
+
+``REPORT_FILE <file>``
+  Specify a non-default report ``<file>``, if generated.
+
+The macro defines the following variables:
+
+``BISON_<Name>_DEFINED``
+  true is the macro ran successfully
+
+``BISON_<Name>_INPUT``
+  The input source file, an alias for <YaccInput>
+
+``BISON_<Name>_OUTPUT_SOURCE``
+  The source file generated by bison
+
+``BISON_<Name>_OUTPUT_HEADER``
+  The header file generated by bison
+
+``BISON_<Name>_OUTPUTS``
+  All files generated by bison including the source, the header and the report
+
+``BISON_<Name>_COMPILE_FLAGS``
+  Options used in the ``bison`` command line
+
+Example usage:
+
+.. code-block:: cmake
+
+  find_package(BISON)
+  BISON_TARGET(MyParser parser.y ${CMAKE_CURRENT_BINARY_DIR}/parser.cpp
+               DEFINES_FILE ${CMAKE_CURRENT_BINARY_DIR}/parser.h)
+  add_executable(Foo main.cpp ${BISON_MyParser_OUTPUTS})
+#]=======================================================================]
 
 find_program(BISON_EXECUTABLE NAMES bison win_bison DOC "path to the bison executable")
 mark_as_advanced(BISON_EXECUTABLE)
diff --git a/Modules/FindBLAS.cmake b/Modules/FindBLAS.cmake
index e955bc2..48cd207 100644
--- a/Modules/FindBLAS.cmake
+++ b/Modules/FindBLAS.cmake
@@ -1,74 +1,75 @@
 # Distributed under the OSI-approved BSD 3-Clause License.  See accompanying
 # file Copyright.txt or https://cmake.org/licensing for details.
 
-#.rst:
-# FindBLAS
-# --------
-#
-# Find BLAS library
-#
-# This module finds an installed fortran library that implements the
-# BLAS linear-algebra interface (see http://www.netlib.org/blas/).  The
-# list of libraries searched for is taken from the autoconf macro file,
-# acx_blas.m4 (distributed at
-# http://ac-archive.sourceforge.net/ac-archive/acx_blas.html).
-#
-# This module sets the following variables:
-#
-# ::
-#
-#   BLAS_FOUND - set to true if a library implementing the BLAS interface
-#     is found
-#   BLAS_LINKER_FLAGS - uncached list of required linker flags (excluding -l
-#     and -L).
-#   BLAS_LIBRARIES - uncached list of libraries (using full path name) to
-#     link against to use BLAS (may be empty if compiler implicitly links
-#     BLAS)
-#   BLAS95_LIBRARIES - uncached list of libraries (using full path name)
-#     to link against to use BLAS95 interface
-#   BLAS95_FOUND - set to true if a library implementing the BLAS f95 interface
-#     is found
-#
-# The following variables can be used to control this module:
-#
-# ::
-#
-#   BLA_STATIC  if set on this determines what kind of linkage we do (static)
-#   BLA_VENDOR  if set checks only the specified vendor, if not set checks
-#      all the possibilities
-#   BLA_F95     if set on tries to find the f95 interfaces for BLAS/LAPACK
-#   BLA_PREFER_PKGCONFIG  if set pkg-config will be used to search for a BLAS
-#      library first and if one is found that is preferred
-#
-# List of vendors (BLA_VENDOR) valid in this module:
-#
-# * Goto
-# * OpenBLAS
-# * FLAME
-# * ATLAS PhiPACK
-# * CXML
-# * DXML
-# * SunPerf
-# * SCSL
-# * SGIMATH
-# * IBMESSL
-# * Intel10_32 (intel mkl v10 32 bit)
-# * Intel10_64lp (intel mkl v10+ 64 bit, threaded code, lp64 model)
-# * Intel10_64lp_seq (intel mkl v10+ 64 bit, sequential code, lp64 model)
-# * Intel10_64ilp (intel mkl v10+ 64 bit, threaded code, ilp64 model)
-# * Intel10_64ilp_seq (intel mkl v10+ 64 bit, sequential code, ilp64 model)
-# * Intel (older versions of mkl 32 and 64 bit)
-# * ACML
-# * ACML_MP
-# * ACML_GPU
-# * Apple
-# * NAS
-# * Generic
-#
-# .. note::
-#
-#   C/CXX should be enabled to use Intel mkl
-#
+#[=======================================================================[.rst:
+FindBLAS
+--------
+
+Find BLAS library
+
+This module finds an installed fortran library that implements the
+BLAS linear-algebra interface (see http://www.netlib.org/blas/).  The
+list of libraries searched for is taken from the autoconf macro file,
+acx_blas.m4 (distributed at
+http://ac-archive.sourceforge.net/ac-archive/acx_blas.html).
+
+This module sets the following variables:
+
+::
+
+  BLAS_FOUND - set to true if a library implementing the BLAS interface
+    is found
+  BLAS_LINKER_FLAGS - uncached list of required linker flags (excluding -l
+    and -L).
+  BLAS_LIBRARIES - uncached list of libraries (using full path name) to
+    link against to use BLAS (may be empty if compiler implicitly links
+    BLAS)
+  BLAS95_LIBRARIES - uncached list of libraries (using full path name)
+    to link against to use BLAS95 interface
+  BLAS95_FOUND - set to true if a library implementing the BLAS f95 interface
+    is found
+
+The following variables can be used to control this module:
+
+::
+
+  BLA_STATIC  if set on this determines what kind of linkage we do (static)
+  BLA_VENDOR  if set checks only the specified vendor, if not set checks
+     all the possibilities
+  BLA_F95     if set on tries to find the f95 interfaces for BLAS/LAPACK
+  BLA_PREFER_PKGCONFIG  if set pkg-config will be used to search for a BLAS
+     library first and if one is found that is preferred
+
+List of vendors (BLA_VENDOR) valid in this module:
+
+* Goto
+* OpenBLAS
+* FLAME
+* ATLAS PhiPACK
+* CXML
+* DXML
+* SunPerf
+* SCSL
+* SGIMATH
+* IBMESSL
+* Intel10_32 (intel mkl v10 32 bit)
+* Intel10_64lp (intel mkl v10+ 64 bit, threaded code, lp64 model)
+* Intel10_64lp_seq (intel mkl v10+ 64 bit, sequential code, lp64 model)
+* Intel10_64ilp (intel mkl v10+ 64 bit, threaded code, ilp64 model)
+* Intel10_64ilp_seq (intel mkl v10+ 64 bit, sequential code, ilp64 model)
+* Intel (older versions of mkl 32 and 64 bit)
+* ACML
+* ACML_MP
+* ACML_GPU
+* Apple
+* NAS
+* Generic
+
+.. note::
+
+  C/CXX should be enabled to use Intel mkl
+
+#]=======================================================================]
 
 include(${CMAKE_CURRENT_LIST_DIR}/CheckFunctionExists.cmake)
 include(${CMAKE_CURRENT_LIST_DIR}/CheckFortranFunctionExists.cmake)
diff --git a/Modules/FindBZip2.cmake b/Modules/FindBZip2.cmake
index 4d7123d..2495148 100644
--- a/Modules/FindBZip2.cmake
+++ b/Modules/FindBZip2.cmake
@@ -1,41 +1,42 @@
 # Distributed under the OSI-approved BSD 3-Clause License.  See accompanying
 # file Copyright.txt or https://cmake.org/licensing for details.
 
-#.rst:
-# FindBZip2
-# ---------
-#
-# Try to find BZip2
-#
-# IMPORTED Targets
-# ^^^^^^^^^^^^^^^^
-#
-# This module defines :prop_tgt:`IMPORTED` target ``BZip2::BZip2``, if
-# BZip2 has been found.
-#
-# Result Variables
-# ^^^^^^^^^^^^^^^^
-#
-# This module defines the following variables:
-#
-# ``BZIP2_FOUND``
-#   system has BZip2
-# ``BZIP2_INCLUDE_DIRS``
-#   the BZip2 include directories
-# ``BZIP2_LIBRARIES``
-#   Link these to use BZip2
-# ``BZIP2_NEED_PREFIX``
-#   this is set if the functions are prefixed with ``BZ2_``
-# ``BZIP2_VERSION_STRING``
-#   the version of BZip2 found
-#
-# Cache variables
-# ^^^^^^^^^^^^^^^
-#
-# The following cache variables may also be set:
-#
-# ``BZIP2_INCLUDE_DIR``
-#   the BZip2 include directory
+#[=======================================================================[.rst:
+FindBZip2
+---------
+
+Try to find BZip2
+
+IMPORTED Targets
+^^^^^^^^^^^^^^^^
+
+This module defines :prop_tgt:`IMPORTED` target ``BZip2::BZip2``, if
+BZip2 has been found.
+
+Result Variables
+^^^^^^^^^^^^^^^^
+
+This module defines the following variables:
+
+``BZIP2_FOUND``
+  system has BZip2
+``BZIP2_INCLUDE_DIRS``
+  the BZip2 include directories
+``BZIP2_LIBRARIES``
+  Link these to use BZip2
+``BZIP2_NEED_PREFIX``
+  this is set if the functions are prefixed with ``BZ2_``
+``BZIP2_VERSION_STRING``
+  the version of BZip2 found
+
+Cache variables
+^^^^^^^^^^^^^^^
+
+The following cache variables may also be set:
+
+``BZIP2_INCLUDE_DIR``
+  the BZip2 include directory
+#]=======================================================================]
 
 set(_BZIP2_PATHS PATHS
   "[HKEY_LOCAL_MACHINE\\SOFTWARE\\GnuWin32\\Bzip2;InstallPath]"
diff --git a/Modules/FindBacktrace.cmake b/Modules/FindBacktrace.cmake
index 59ebdc2..e1f45f7 100644
--- a/Modules/FindBacktrace.cmake
+++ b/Modules/FindBacktrace.cmake
@@ -1,41 +1,42 @@
 # Distributed under the OSI-approved BSD 3-Clause License.  See accompanying
 # file Copyright.txt or https://cmake.org/licensing for details.
 
-#.rst:
-# FindBacktrace
-# -------------
-#
-# Find provider for backtrace(3).
-#
-# Checks if OS supports backtrace(3) via either libc or custom library.
-# This module defines the following variables:
-#
-# ``Backtrace_HEADER``
-#   The header file needed for backtrace(3). Cached.
-#   Could be forcibly set by user.
-# ``Backtrace_INCLUDE_DIRS``
-#   The include directories needed to use backtrace(3) header.
-# ``Backtrace_LIBRARIES``
-#   The libraries (linker flags) needed to use backtrace(3), if any.
-# ``Backtrace_FOUND``
-#   Is set if and only if backtrace(3) support detected.
-#
-# The following cache variables are also available to set or use:
-#
-# ``Backtrace_LIBRARY``
-#   The external library providing backtrace, if any.
-# ``Backtrace_INCLUDE_DIR``
-#   The directory holding the backtrace(3) header.
-#
-# Typical usage is to generate of header file using configure_file() with the
-# contents like the following::
-#
-#  #cmakedefine01 Backtrace_FOUND
-#  #if Backtrace_FOUND
-#  # include <${Backtrace_HEADER}>
-#  #endif
-#
-# And then reference that generated header file in actual source.
+#[=======================================================================[.rst:
+FindBacktrace
+-------------
+
+Find provider for backtrace(3).
+
+Checks if OS supports backtrace(3) via either libc or custom library.
+This module defines the following variables:
+
+``Backtrace_HEADER``
+  The header file needed for backtrace(3). Cached.
+  Could be forcibly set by user.
+``Backtrace_INCLUDE_DIRS``
+  The include directories needed to use backtrace(3) header.
+``Backtrace_LIBRARIES``
+  The libraries (linker flags) needed to use backtrace(3), if any.
+``Backtrace_FOUND``
+  Is set if and only if backtrace(3) support detected.
+
+The following cache variables are also available to set or use:
+
+``Backtrace_LIBRARY``
+  The external library providing backtrace, if any.
+``Backtrace_INCLUDE_DIR``
+  The directory holding the backtrace(3) header.
+
+Typical usage is to generate of header file using configure_file() with the
+contents like the following::
+
+ #cmakedefine01 Backtrace_FOUND
+ #if Backtrace_FOUND
+ # include <${Backtrace_HEADER}>
+ #endif
+
+And then reference that generated header file in actual source.
+#]=======================================================================]
 
 include(CMakePushCheckState)
 include(CheckSymbolExists)
diff --git a/Modules/FindBoost.cmake b/Modules/FindBoost.cmake
index 5090c60..d1f2efc 100644
--- a/Modules/FindBoost.cmake
+++ b/Modules/FindBoost.cmake
@@ -1,237 +1,238 @@
 # Distributed under the OSI-approved BSD 3-Clause License.  See accompanying
 # file Copyright.txt or https://cmake.org/licensing for details.
 
-#.rst:
-# FindBoost
-# ---------
-#
-# Find Boost include dirs and libraries
-#
-# Use this module by invoking find_package with the form::
-#
-#   find_package(Boost
-#     [version] [EXACT]      # Minimum or EXACT version e.g. 1.67.0
-#     [REQUIRED]             # Fail with error if Boost is not found
-#     [COMPONENTS <libs>...] # Boost libraries by their canonical name
-#                            # e.g. "date_time" for "libboost_date_time"
-#     [OPTIONAL_COMPONENTS <libs>...]
-#                            # Optional Boost libraries by their canonical name)
-#     )                      # e.g. "date_time" for "libboost_date_time"
-#
-# This module finds headers and requested component libraries OR a CMake
-# package configuration file provided by a "Boost CMake" build.  For the
-# latter case skip to the "Boost CMake" section below.  For the former
-# case results are reported in variables::
-#
-#   Boost_FOUND            - True if headers and requested libraries were found
-#   Boost_INCLUDE_DIRS     - Boost include directories
-#   Boost_LIBRARY_DIRS     - Link directories for Boost libraries
-#   Boost_LIBRARIES        - Boost component libraries to be linked
-#   Boost_<C>_FOUND        - True if component <C> was found (<C> is upper-case)
-#   Boost_<C>_LIBRARY      - Libraries to link for component <C> (may include
-#                            target_link_libraries debug/optimized keywords)
-#   Boost_VERSION          - BOOST_VERSION value from boost/version.hpp
-#   Boost_LIB_VERSION      - Version string appended to library filenames
-#   Boost_MAJOR_VERSION    - Boost major version number (X in X.y.z)
-#   Boost_MINOR_VERSION    - Boost minor version number (Y in x.Y.z)
-#   Boost_SUBMINOR_VERSION - Boost subminor version number (Z in x.y.Z)
-#   Boost_LIB_DIAGNOSTIC_DEFINITIONS (Windows)
-#                          - Pass to add_definitions() to have diagnostic
-#                            information about Boost's automatic linking
-#                            displayed during compilation
-#
-# Note that Boost Python components require a Python version suffix
-# (Boost 1.67 and later), e.g. ``python36`` or ``python27`` for the
-# versions built against Python 3.6 and 2.7, respectively.  This also
-# applies to additional components using Python including
-# ``mpi_python`` and ``numpy``.  Earlier Boost releases may use
-# distribution-specific suffixes such as ``2``, ``3`` or ``2.7``.
-# These may also be used as suffixes, but note that they are not
-# portable.
-#
-# This module reads hints about search locations from variables::
-#
-#   BOOST_ROOT             - Preferred installation prefix
-#    (or BOOSTROOT)
-#   BOOST_INCLUDEDIR       - Preferred include directory e.g. <prefix>/include
-#   BOOST_LIBRARYDIR       - Preferred library directory e.g. <prefix>/lib
-#   Boost_NO_SYSTEM_PATHS  - Set to ON to disable searching in locations not
-#                            specified by these hint variables. Default is OFF.
-#   Boost_ADDITIONAL_VERSIONS
-#                          - List of Boost versions not known to this module
-#                            (Boost install locations may contain the version)
-#
-# and saves search results persistently in CMake cache entries::
-#
-#   Boost_INCLUDE_DIR         - Directory containing Boost headers
-#   Boost_LIBRARY_DIR_RELEASE - Directory containing release Boost libraries
-#   Boost_LIBRARY_DIR_DEBUG   - Directory containing debug Boost libraries
-#   Boost_<C>_LIBRARY_DEBUG   - Component <C> library debug variant
-#   Boost_<C>_LIBRARY_RELEASE - Component <C> library release variant
-#
-# The following :prop_tgt:`IMPORTED` targets are also defined::
-#
-#   Boost::boost                  - Target for header-only dependencies
-#                                   (Boost include directory)
-#   Boost::<C>                    - Target for specific component dependency
-#                                   (shared or static library); <C> is lower-
-#                                   case
-#   Boost::diagnostic_definitions - interface target to enable diagnostic
-#                                   information about Boost's automatic linking
-#                                   during compilation (adds BOOST_LIB_DIAGNOSTIC)
-#   Boost::disable_autolinking    - interface target to disable automatic
-#                                   linking with MSVC (adds BOOST_ALL_NO_LIB)
-#   Boost::dynamic_linking        - interface target to enable dynamic linking
-#                                   linking with MSVC (adds BOOST_ALL_DYN_LINK)
-#
-# Implicit dependencies such as Boost::filesystem requiring
-# Boost::system will be automatically detected and satisfied, even
-# if system is not specified when using find_package and if
-# Boost::system is not added to target_link_libraries.  If using
-# Boost::thread, then Threads::Threads will also be added automatically.
-#
-# It is important to note that the imported targets behave differently
-# than variables created by this module: multiple calls to
-# find_package(Boost) in the same directory or sub-directories with
-# different options (e.g. static or shared) will not override the
-# values of the targets created by the first call.
-#
-# Users may set these hints or results as cache entries.  Projects
-# should not read these entries directly but instead use the above
-# result variables.  Note that some hint names start in upper-case
-# "BOOST".  One may specify these as environment variables if they are
-# not specified as CMake variables or cache entries.
-#
-# This module first searches for the Boost header files using the above
-# hint variables (excluding BOOST_LIBRARYDIR) and saves the result in
-# Boost_INCLUDE_DIR.  Then it searches for requested component libraries
-# using the above hints (excluding BOOST_INCLUDEDIR and
-# Boost_ADDITIONAL_VERSIONS), "lib" directories near Boost_INCLUDE_DIR,
-# and the library name configuration settings below.  It saves the
-# library directories in Boost_LIBRARY_DIR_DEBUG and
-# Boost_LIBRARY_DIR_RELEASE and individual library
-# locations in Boost_<C>_LIBRARY_DEBUG and Boost_<C>_LIBRARY_RELEASE.
-# When one changes settings used by previous searches in the same build
-# tree (excluding environment variables) this module discards previous
-# search results affected by the changes and searches again.
-#
-# Boost libraries come in many variants encoded in their file name.
-# Users or projects may tell this module which variant to find by
-# setting variables::
-#
-#   Boost_USE_DEBUG_LIBS     - Set to ON or OFF to specify whether to search
-#                              and use the debug libraries.  Default is ON.
-#   Boost_USE_RELEASE_LIBS   - Set to ON or OFF to specify whether to search
-#                              and use the release libraries.  Default is ON.
-#   Boost_USE_MULTITHREADED  - Set to OFF to use the non-multithreaded
-#                              libraries ('mt' tag).  Default is ON.
-#   Boost_USE_STATIC_LIBS    - Set to ON to force the use of the static
-#                              libraries.  Default is OFF.
-#   Boost_USE_STATIC_RUNTIME - Set to ON or OFF to specify whether to use
-#                              libraries linked statically to the C++ runtime
-#                              ('s' tag).  Default is platform dependent.
-#   Boost_USE_DEBUG_RUNTIME  - Set to ON or OFF to specify whether to use
-#                              libraries linked to the MS debug C++ runtime
-#                              ('g' tag).  Default is ON.
-#   Boost_USE_DEBUG_PYTHON   - Set to ON to use libraries compiled with a
-#                              debug Python build ('y' tag). Default is OFF.
-#   Boost_USE_STLPORT        - Set to ON to use libraries compiled with
-#                              STLPort ('p' tag).  Default is OFF.
-#   Boost_USE_STLPORT_DEPRECATED_NATIVE_IOSTREAMS
-#                            - Set to ON to use libraries compiled with
-#                              STLPort deprecated "native iostreams"
-#                              ('n' tag).  Default is OFF.
-#   Boost_COMPILER           - Set to the compiler-specific library suffix
-#                              (e.g. "-gcc43").  Default is auto-computed
-#                              for the C++ compiler in use.  A list may be
-#                              used if multiple compatible suffixes should
-#                              be tested for, in decreasing order of
-#                              preference.
-#   Boost_THREADAPI          - Suffix for "thread" component library name,
-#                              such as "pthread" or "win32".  Names with
-#                              and without this suffix will both be tried.
-#   Boost_NAMESPACE          - Alternate namespace used to build boost with
-#                              e.g. if set to "myboost", will search for
-#                              myboost_thread instead of boost_thread.
-#
-# Other variables one may set to control this module are::
-#
-#   Boost_DEBUG              - Set to ON to enable debug output from FindBoost.
-#                              Please enable this before filing any bug report.
-#   Boost_DETAILED_FAILURE_MSG
-#                            - Set to ON to add detailed information to the
-#                              failure message even when the REQUIRED option
-#                              is not given to the find_package call.
-#   Boost_REALPATH           - Set to ON to resolve symlinks for discovered
-#                              libraries to assist with packaging.  For example,
-#                              the "system" component library may be resolved to
-#                              "/usr/lib/libboost_system.so.1.67.0" instead of
-#                              "/usr/lib/libboost_system.so".  This does not
-#                              affect linking and should not be enabled unless
-#                              the user needs this information.
-#   Boost_LIBRARY_DIR        - Default value for Boost_LIBRARY_DIR_RELEASE and
-#                              Boost_LIBRARY_DIR_DEBUG.
-#
-# On Visual Studio and Borland compilers Boost headers request automatic
-# linking to corresponding libraries.  This requires matching libraries
-# to be linked explicitly or available in the link library search path.
-# In this case setting Boost_USE_STATIC_LIBS to OFF may not achieve
-# dynamic linking.  Boost automatic linking typically requests static
-# libraries with a few exceptions (such as Boost.Python).  Use::
-#
-#   add_definitions(${Boost_LIB_DIAGNOSTIC_DEFINITIONS})
-#
-# to ask Boost to report information about automatic linking requests.
-#
-# Example to find Boost headers only::
-#
-#   find_package(Boost 1.36.0)
-#   if(Boost_FOUND)
-#     include_directories(${Boost_INCLUDE_DIRS})
-#     add_executable(foo foo.cc)
-#   endif()
-#
-# Example to find Boost libraries and use imported targets::
-#
-#   find_package(Boost 1.56 REQUIRED COMPONENTS
-#                date_time filesystem iostreams)
-#   add_executable(foo foo.cc)
-#   target_link_libraries(foo Boost::date_time Boost::filesystem
-#                             Boost::iostreams)
-#
-# Example to find Boost Python 3.6 libraries and use imported targets::
-#
-#   find_package(Boost 1.67 REQUIRED COMPONENTS
-#                python36 numpy36)
-#   add_executable(foo foo.cc)
-#   target_link_libraries(foo Boost::python36 Boost::numpy36)
-#
-# Example to find Boost headers and some *static* (release only) libraries::
-#
-#   set(Boost_USE_STATIC_LIBS        ON)  # only find static libs
-#   set(Boost_USE_DEBUG_LIBS         OFF) # ignore debug libs and
-#   set(Boost_USE_RELEASE_LIBS       ON)  # only find release libs
-#   set(Boost_USE_MULTITHREADED      ON)
-#   set(Boost_USE_STATIC_RUNTIME    OFF)
-#   find_package(Boost 1.66.0 COMPONENTS date_time filesystem system ...)
-#   if(Boost_FOUND)
-#     include_directories(${Boost_INCLUDE_DIRS})
-#     add_executable(foo foo.cc)
-#     target_link_libraries(foo ${Boost_LIBRARIES})
-#   endif()
-#
-# Boost CMake
-# ^^^^^^^^^^^
-#
-# If Boost was built using the boost-cmake project it provides a package
-# configuration file for use with find_package's Config mode.  This
-# module looks for the package configuration file called
-# BoostConfig.cmake or boost-config.cmake and stores the result in cache
-# entry "Boost_DIR".  If found, the package configuration file is loaded
-# and this module returns with no further action.  See documentation of
-# the Boost CMake package configuration for details on what it provides.
-#
-# Set Boost_NO_BOOST_CMAKE to ON to disable the search for boost-cmake.
+#[=======================================================================[.rst:
+FindBoost
+---------
+
+Find Boost include dirs and libraries
+
+Use this module by invoking find_package with the form::
+
+  find_package(Boost
+    [version] [EXACT]      # Minimum or EXACT version e.g. 1.67.0
+    [REQUIRED]             # Fail with error if Boost is not found
+    [COMPONENTS <libs>...] # Boost libraries by their canonical name
+                           # e.g. "date_time" for "libboost_date_time"
+    [OPTIONAL_COMPONENTS <libs>...]
+                           # Optional Boost libraries by their canonical name)
+    )                      # e.g. "date_time" for "libboost_date_time"
+
+This module finds headers and requested component libraries OR a CMake
+package configuration file provided by a "Boost CMake" build.  For the
+latter case skip to the "Boost CMake" section below.  For the former
+case results are reported in variables::
+
+  Boost_FOUND            - True if headers and requested libraries were found
+  Boost_INCLUDE_DIRS     - Boost include directories
+  Boost_LIBRARY_DIRS     - Link directories for Boost libraries
+  Boost_LIBRARIES        - Boost component libraries to be linked
+  Boost_<C>_FOUND        - True if component <C> was found (<C> is upper-case)
+  Boost_<C>_LIBRARY      - Libraries to link for component <C> (may include
+                           target_link_libraries debug/optimized keywords)
+  Boost_VERSION          - BOOST_VERSION value from boost/version.hpp
+  Boost_LIB_VERSION      - Version string appended to library filenames
+  Boost_MAJOR_VERSION    - Boost major version number (X in X.y.z)
+  Boost_MINOR_VERSION    - Boost minor version number (Y in x.Y.z)
+  Boost_SUBMINOR_VERSION - Boost subminor version number (Z in x.y.Z)
+  Boost_LIB_DIAGNOSTIC_DEFINITIONS (Windows)
+                         - Pass to add_definitions() to have diagnostic
+                           information about Boost's automatic linking
+                           displayed during compilation
+
+Note that Boost Python components require a Python version suffix
+(Boost 1.67 and later), e.g. ``python36`` or ``python27`` for the
+versions built against Python 3.6 and 2.7, respectively.  This also
+applies to additional components using Python including
+``mpi_python`` and ``numpy``.  Earlier Boost releases may use
+distribution-specific suffixes such as ``2``, ``3`` or ``2.7``.
+These may also be used as suffixes, but note that they are not
+portable.
+
+This module reads hints about search locations from variables::
+
+  BOOST_ROOT             - Preferred installation prefix
+   (or BOOSTROOT)
+  BOOST_INCLUDEDIR       - Preferred include directory e.g. <prefix>/include
+  BOOST_LIBRARYDIR       - Preferred library directory e.g. <prefix>/lib
+  Boost_NO_SYSTEM_PATHS  - Set to ON to disable searching in locations not
+                           specified by these hint variables. Default is OFF.
+  Boost_ADDITIONAL_VERSIONS
+                         - List of Boost versions not known to this module
+                           (Boost install locations may contain the version)
+
+and saves search results persistently in CMake cache entries::
+
+  Boost_INCLUDE_DIR         - Directory containing Boost headers
+  Boost_LIBRARY_DIR_RELEASE - Directory containing release Boost libraries
+  Boost_LIBRARY_DIR_DEBUG   - Directory containing debug Boost libraries
+  Boost_<C>_LIBRARY_DEBUG   - Component <C> library debug variant
+  Boost_<C>_LIBRARY_RELEASE - Component <C> library release variant
+
+The following :prop_tgt:`IMPORTED` targets are also defined::
+
+  Boost::boost                  - Target for header-only dependencies
+                                  (Boost include directory)
+  Boost::<C>                    - Target for specific component dependency
+                                  (shared or static library); <C> is lower-
+                                  case
+  Boost::diagnostic_definitions - interface target to enable diagnostic
+                                  information about Boost's automatic linking
+                                  during compilation (adds BOOST_LIB_DIAGNOSTIC)
+  Boost::disable_autolinking    - interface target to disable automatic
+                                  linking with MSVC (adds BOOST_ALL_NO_LIB)
+  Boost::dynamic_linking        - interface target to enable dynamic linking
+                                  linking with MSVC (adds BOOST_ALL_DYN_LINK)
+
+Implicit dependencies such as Boost::filesystem requiring
+Boost::system will be automatically detected and satisfied, even
+if system is not specified when using find_package and if
+Boost::system is not added to target_link_libraries.  If using
+Boost::thread, then Threads::Threads will also be added automatically.
+
+It is important to note that the imported targets behave differently
+than variables created by this module: multiple calls to
+find_package(Boost) in the same directory or sub-directories with
+different options (e.g. static or shared) will not override the
+values of the targets created by the first call.
+
+Users may set these hints or results as cache entries.  Projects
+should not read these entries directly but instead use the above
+result variables.  Note that some hint names start in upper-case
+"BOOST".  One may specify these as environment variables if they are
+not specified as CMake variables or cache entries.
+
+This module first searches for the Boost header files using the above
+hint variables (excluding BOOST_LIBRARYDIR) and saves the result in
+Boost_INCLUDE_DIR.  Then it searches for requested component libraries
+using the above hints (excluding BOOST_INCLUDEDIR and
+Boost_ADDITIONAL_VERSIONS), "lib" directories near Boost_INCLUDE_DIR,
+and the library name configuration settings below.  It saves the
+library directories in Boost_LIBRARY_DIR_DEBUG and
+Boost_LIBRARY_DIR_RELEASE and individual library
+locations in Boost_<C>_LIBRARY_DEBUG and Boost_<C>_LIBRARY_RELEASE.
+When one changes settings used by previous searches in the same build
+tree (excluding environment variables) this module discards previous
+search results affected by the changes and searches again.
+
+Boost libraries come in many variants encoded in their file name.
+Users or projects may tell this module which variant to find by
+setting variables::
+
+  Boost_USE_DEBUG_LIBS     - Set to ON or OFF to specify whether to search
+                             and use the debug libraries.  Default is ON.
+  Boost_USE_RELEASE_LIBS   - Set to ON or OFF to specify whether to search
+                             and use the release libraries.  Default is ON.
+  Boost_USE_MULTITHREADED  - Set to OFF to use the non-multithreaded
+                             libraries ('mt' tag).  Default is ON.
+  Boost_USE_STATIC_LIBS    - Set to ON to force the use of the static
+                             libraries.  Default is OFF.
+  Boost_USE_STATIC_RUNTIME - Set to ON or OFF to specify whether to use
+                             libraries linked statically to the C++ runtime
+                             ('s' tag).  Default is platform dependent.
+  Boost_USE_DEBUG_RUNTIME  - Set to ON or OFF to specify whether to use
+                             libraries linked to the MS debug C++ runtime
+                             ('g' tag).  Default is ON.
+  Boost_USE_DEBUG_PYTHON   - Set to ON to use libraries compiled with a
+                             debug Python build ('y' tag). Default is OFF.
+  Boost_USE_STLPORT        - Set to ON to use libraries compiled with
+                             STLPort ('p' tag).  Default is OFF.
+  Boost_USE_STLPORT_DEPRECATED_NATIVE_IOSTREAMS
+                           - Set to ON to use libraries compiled with
+                             STLPort deprecated "native iostreams"
+                             ('n' tag).  Default is OFF.
+  Boost_COMPILER           - Set to the compiler-specific library suffix
+                             (e.g. "-gcc43").  Default is auto-computed
+                             for the C++ compiler in use.  A list may be
+                             used if multiple compatible suffixes should
+                             be tested for, in decreasing order of
+                             preference.
+  Boost_THREADAPI          - Suffix for "thread" component library name,
+                             such as "pthread" or "win32".  Names with
+                             and without this suffix will both be tried.
+  Boost_NAMESPACE          - Alternate namespace used to build boost with
+                             e.g. if set to "myboost", will search for
+                             myboost_thread instead of boost_thread.
+
+Other variables one may set to control this module are::
+
+  Boost_DEBUG              - Set to ON to enable debug output from FindBoost.
+                             Please enable this before filing any bug report.
+  Boost_DETAILED_FAILURE_MSG
+                           - Set to ON to add detailed information to the
+                             failure message even when the REQUIRED option
+                             is not given to the find_package call.
+  Boost_REALPATH           - Set to ON to resolve symlinks for discovered
+                             libraries to assist with packaging.  For example,
+                             the "system" component library may be resolved to
+                             "/usr/lib/libboost_system.so.1.67.0" instead of
+                             "/usr/lib/libboost_system.so".  This does not
+                             affect linking and should not be enabled unless
+                             the user needs this information.
+  Boost_LIBRARY_DIR        - Default value for Boost_LIBRARY_DIR_RELEASE and
+                             Boost_LIBRARY_DIR_DEBUG.
+
+On Visual Studio and Borland compilers Boost headers request automatic
+linking to corresponding libraries.  This requires matching libraries
+to be linked explicitly or available in the link library search path.
+In this case setting Boost_USE_STATIC_LIBS to OFF may not achieve
+dynamic linking.  Boost automatic linking typically requests static
+libraries with a few exceptions (such as Boost.Python).  Use::
+
+  add_definitions(${Boost_LIB_DIAGNOSTIC_DEFINITIONS})
+
+to ask Boost to report information about automatic linking requests.
+
+Example to find Boost headers only::
+
+  find_package(Boost 1.36.0)
+  if(Boost_FOUND)
+    include_directories(${Boost_INCLUDE_DIRS})
+    add_executable(foo foo.cc)
+  endif()
+
+Example to find Boost libraries and use imported targets::
+
+  find_package(Boost 1.56 REQUIRED COMPONENTS
+               date_time filesystem iostreams)
+  add_executable(foo foo.cc)
+  target_link_libraries(foo Boost::date_time Boost::filesystem
+                            Boost::iostreams)
+
+Example to find Boost Python 3.6 libraries and use imported targets::
+
+  find_package(Boost 1.67 REQUIRED COMPONENTS
+               python36 numpy36)
+  add_executable(foo foo.cc)
+  target_link_libraries(foo Boost::python36 Boost::numpy36)
+
+Example to find Boost headers and some *static* (release only) libraries::
+
+  set(Boost_USE_STATIC_LIBS        ON)  # only find static libs
+  set(Boost_USE_DEBUG_LIBS         OFF) # ignore debug libs and
+  set(Boost_USE_RELEASE_LIBS       ON)  # only find release libs
+  set(Boost_USE_MULTITHREADED      ON)
+  set(Boost_USE_STATIC_RUNTIME    OFF)
+  find_package(Boost 1.66.0 COMPONENTS date_time filesystem system ...)
+  if(Boost_FOUND)
+    include_directories(${Boost_INCLUDE_DIRS})
+    add_executable(foo foo.cc)
+    target_link_libraries(foo ${Boost_LIBRARIES})
+  endif()
+
+Boost CMake
+^^^^^^^^^^^
+
+If Boost was built using the boost-cmake project it provides a package
+configuration file for use with find_package's Config mode.  This
+module looks for the package configuration file called
+BoostConfig.cmake or boost-config.cmake and stores the result in cache
+entry "Boost_DIR".  If found, the package configuration file is loaded
+and this module returns with no further action.  See documentation of
+the Boost CMake package configuration for details on what it provides.
+
+Set Boost_NO_BOOST_CMAKE to ON to disable the search for boost-cmake.
+#]=======================================================================]
 
 # Save project's policies
 cmake_policy(PUSH)
diff --git a/Modules/FindBullet.cmake b/Modules/FindBullet.cmake
index fc6695c..a3c9fc6 100644
--- a/Modules/FindBullet.cmake
+++ b/Modules/FindBullet.cmake
@@ -1,39 +1,40 @@
 # Distributed under the OSI-approved BSD 3-Clause License.  See accompanying
 # file Copyright.txt or https://cmake.org/licensing for details.
 
-#.rst:
-# FindBullet
-# ----------
-#
-# Try to find the Bullet physics engine
-#
-#
-#
-# ::
-#
-#   This module defines the following variables
-#
-#
-#
-# ::
-#
-#   BULLET_FOUND - Was bullet found
-#   BULLET_INCLUDE_DIRS - the Bullet include directories
-#   BULLET_LIBRARIES - Link to this, by default it includes
-#                      all bullet components (Dynamics,
-#                      Collision, LinearMath, & SoftBody)
-#
-#
-#
-# ::
-#
-#   This module accepts the following variables
-#
-#
-#
-# ::
-#
-#   BULLET_ROOT - Can be set to bullet install path or Windows build path
+#[=======================================================================[.rst:
+FindBullet
+----------
+
+Try to find the Bullet physics engine
+
+
+
+::
+
+  This module defines the following variables
+
+
+
+::
+
+  BULLET_FOUND - Was bullet found
+  BULLET_INCLUDE_DIRS - the Bullet include directories
+  BULLET_LIBRARIES - Link to this, by default it includes
+                     all bullet components (Dynamics,
+                     Collision, LinearMath, & SoftBody)
+
+
+
+::
+
+  This module accepts the following variables
+
+
+
+::
+
+  BULLET_ROOT - Can be set to bullet install path or Windows build path
+#]=======================================================================]
 
 macro(_FIND_BULLET_LIBRARY _var)
   find_library(${_var}
diff --git a/Modules/FindCABLE.cmake b/Modules/FindCABLE.cmake
index 450e322..1f4ae76 100644
--- a/Modules/FindCABLE.cmake
+++ b/Modules/FindCABLE.cmake
@@ -1,27 +1,28 @@
 # Distributed under the OSI-approved BSD 3-Clause License.  See accompanying
 # file Copyright.txt or https://cmake.org/licensing for details.
 
-#.rst:
-# FindCABLE
-# ---------
-#
-# Find CABLE
-#
-# This module finds if CABLE is installed and determines where the
-# include files and libraries are.  This code sets the following
-# variables:
-#
-# ::
-#
-#   CABLE             the path to the cable executable
-#   CABLE_TCL_LIBRARY the path to the Tcl wrapper library
-#   CABLE_INCLUDE_DIR the path to the include directory
-#
-#
-#
-# To build Tcl wrappers, you should add shared library and link it to
-# ${CABLE_TCL_LIBRARY}.  You should also add ${CABLE_INCLUDE_DIR} as an
-# include directory.
+#[=======================================================================[.rst:
+FindCABLE
+---------
+
+Find CABLE
+
+This module finds if CABLE is installed and determines where the
+include files and libraries are.  This code sets the following
+variables:
+
+::
+
+  CABLE             the path to the cable executable
+  CABLE_TCL_LIBRARY the path to the Tcl wrapper library
+  CABLE_INCLUDE_DIR the path to the include directory
+
+
+
+To build Tcl wrappers, you should add shared library and link it to
+${CABLE_TCL_LIBRARY}.  You should also add ${CABLE_INCLUDE_DIR} as an
+include directory.
+#]=======================================================================]
 
 if(NOT CABLE)
   find_path(CABLE_BUILD_DIR cableVersion.h)
diff --git a/Modules/FindCUDA.cmake b/Modules/FindCUDA.cmake
index 3527979..2c8dd81 100644
--- a/Modules/FindCUDA.cmake
+++ b/Modules/FindCUDA.cmake
@@ -1,378 +1,379 @@
-#.rst:
-# FindCUDA
-# --------
-#
-# .. note::
-#
-#   The FindCUDA module has been superseded by first-class support
-#   for the CUDA language in CMake.  It is no longer necessary to
-#   use this module or call ``find_package(CUDA)``.  This module
-#   now exists only for compatibility with projects that have not
-#   been ported.
-#
-#   Instead, list ``CUDA`` among the languages named in the top-level
-#   call to the :command:`project` command, or call the
-#   :command:`enable_language` command with ``CUDA``.
-#   Then one can add CUDA (``.cu``) sources to programs directly
-#   in calls to :command:`add_library` and :command:`add_executable`.
-#
-# Tools for building CUDA C files: libraries and build dependencies.
-#
-# This script locates the NVIDIA CUDA C tools.  It should work on Linux,
-# Windows, and macOS and should be reasonably up to date with CUDA C
-# releases.
-#
-# This script makes use of the standard :command:`find_package` arguments of
-# ``<VERSION>``, ``REQUIRED`` and ``QUIET``.  ``CUDA_FOUND`` will report if an
-# acceptable version of CUDA was found.
-#
-# The script will prompt the user to specify ``CUDA_TOOLKIT_ROOT_DIR`` if
-# the prefix cannot be determined by the location of nvcc in the system
-# path and ``REQUIRED`` is specified to :command:`find_package`.  To use
-# a different installed version of the toolkit set the environment variable
-# ``CUDA_BIN_PATH`` before running cmake (e.g.
-# ``CUDA_BIN_PATH=/usr/local/cuda1.0`` instead of the default
-# ``/usr/local/cuda``) or set ``CUDA_TOOLKIT_ROOT_DIR`` after configuring.  If
-# you change the value of ``CUDA_TOOLKIT_ROOT_DIR``, various components that
-# depend on the path will be relocated.
-#
-# It might be necessary to set ``CUDA_TOOLKIT_ROOT_DIR`` manually on certain
-# platforms, or to use a CUDA runtime not installed in the default
-# location.  In newer versions of the toolkit the CUDA library is
-# included with the graphics driver -- be sure that the driver version
-# matches what is needed by the CUDA runtime version.
-#
-# The following variables affect the behavior of the macros in the
-# script (in alphabetical order).  Note that any of these flags can be
-# changed multiple times in the same directory before calling
-# ``CUDA_ADD_EXECUTABLE``, ``CUDA_ADD_LIBRARY``, ``CUDA_COMPILE``,
-# ``CUDA_COMPILE_PTX``, ``CUDA_COMPILE_FATBIN``, ``CUDA_COMPILE_CUBIN``
-# or ``CUDA_WRAP_SRCS``::
-#
-#   CUDA_64_BIT_DEVICE_CODE (Default matches host bit size)
-#   -- Set to ON to compile for 64 bit device code, OFF for 32 bit device code.
-#      Note that making this different from the host code when generating object
-#      or C files from CUDA code just won't work, because size_t gets defined by
-#      nvcc in the generated source.  If you compile to PTX and then load the
-#      file yourself, you can mix bit sizes between device and host.
-#
-#   CUDA_ATTACH_VS_BUILD_RULE_TO_CUDA_FILE (Default ON)
-#   -- Set to ON if you want the custom build rule to be attached to the source
-#      file in Visual Studio.  Turn OFF if you add the same cuda file to multiple
-#      targets.
-#
-#      This allows the user to build the target from the CUDA file; however, bad
-#      things can happen if the CUDA source file is added to multiple targets.
-#      When performing parallel builds it is possible for the custom build
-#      command to be run more than once and in parallel causing cryptic build
-#      errors.  VS runs the rules for every source file in the target, and a
-#      source can have only one rule no matter how many projects it is added to.
-#      When the rule is run from multiple targets race conditions can occur on
-#      the generated file.  Eventually everything will get built, but if the user
-#      is unaware of this behavior, there may be confusion.  It would be nice if
-#      this script could detect the reuse of source files across multiple targets
-#      and turn the option off for the user, but no good solution could be found.
-#
-#   CUDA_BUILD_CUBIN (Default OFF)
-#   -- Set to ON to enable and extra compilation pass with the -cubin option in
-#      Device mode. The output is parsed and register, shared memory usage is
-#      printed during build.
-#
-#   CUDA_BUILD_EMULATION (Default OFF for device mode)
-#   -- Set to ON for Emulation mode. -D_DEVICEEMU is defined for CUDA C files
-#      when CUDA_BUILD_EMULATION is TRUE.
-#
-#   CUDA_LINK_LIBRARIES_KEYWORD (Default "")
-#    -- The <PRIVATE|PUBLIC|INTERFACE> keyword to use for internal
-#       target_link_libraries calls. The default is to use no keyword which
-#       uses the old "plain" form of target_link_libraries. Note that is matters
-#       because whatever is used inside the FindCUDA module must also be used
-#       outside - the two forms of target_link_libraries cannot be mixed.
-#
-#   CUDA_GENERATED_OUTPUT_DIR (Default CMAKE_CURRENT_BINARY_DIR)
-#   -- Set to the path you wish to have the generated files placed.  If it is
-#      blank output files will be placed in CMAKE_CURRENT_BINARY_DIR.
-#      Intermediate files will always be placed in
-#      CMAKE_CURRENT_BINARY_DIR/CMakeFiles.
-#
-#   CUDA_HOST_COMPILATION_CPP (Default ON)
-#   -- Set to OFF for C compilation of host code.
-#
-#   CUDA_HOST_COMPILER (Default CMAKE_C_COMPILER)
-#   -- Set the host compiler to be used by nvcc.  Ignored if -ccbin or
-#      --compiler-bindir is already present in the CUDA_NVCC_FLAGS or
-#      CUDA_NVCC_FLAGS_<CONFIG> variables.  For Visual Studio targets,
-#      the host compiler is constructed with one or more visual studio macros
-#      such as $(VCInstallDir), that expands out to the path when
-#      the command is run from within VS.
-#      If the CUDAHOSTCXX environment variable is set it will
-#      be used as the default.
-#
-#   CUDA_NVCC_FLAGS
-#   CUDA_NVCC_FLAGS_<CONFIG>
-#   -- Additional NVCC command line arguments.  NOTE: multiple arguments must be
-#      semi-colon delimited (e.g. --compiler-options;-Wall)
-#
-#   CUDA_PROPAGATE_HOST_FLAGS (Default ON)
-#   -- Set to ON to propagate CMAKE_{C,CXX}_FLAGS and their configuration
-#      dependent counterparts (e.g. CMAKE_C_FLAGS_DEBUG) automatically to the
-#      host compiler through nvcc's -Xcompiler flag.  This helps make the
-#      generated host code match the rest of the system better.  Sometimes
-#      certain flags give nvcc problems, and this will help you turn the flag
-#      propagation off.  This does not affect the flags supplied directly to nvcc
-#      via CUDA_NVCC_FLAGS or through the OPTION flags specified through
-#      CUDA_ADD_LIBRARY, CUDA_ADD_EXECUTABLE, or CUDA_WRAP_SRCS.  Flags used for
-#      shared library compilation are not affected by this flag.
-#
-#   CUDA_SEPARABLE_COMPILATION (Default OFF)
-#   -- If set this will enable separable compilation for all CUDA runtime object
-#      files.  If used outside of CUDA_ADD_EXECUTABLE and CUDA_ADD_LIBRARY
-#      (e.g. calling CUDA_WRAP_SRCS directly),
-#      CUDA_COMPUTE_SEPARABLE_COMPILATION_OBJECT_FILE_NAME and
-#      CUDA_LINK_SEPARABLE_COMPILATION_OBJECTS should be called.
-#
-#   CUDA_SOURCE_PROPERTY_FORMAT
-#   -- If this source file property is set, it can override the format specified
-#      to CUDA_WRAP_SRCS (OBJ, PTX, CUBIN, or FATBIN).  If an input source file
-#      is not a .cu file, setting this file will cause it to be treated as a .cu
-#      file. See documentation for set_source_files_properties on how to set
-#      this property.
-#
-#   CUDA_USE_STATIC_CUDA_RUNTIME (Default ON)
-#   -- When enabled the static version of the CUDA runtime library will be used
-#      in CUDA_LIBRARIES.  If the version of CUDA configured doesn't support
-#      this option, then it will be silently disabled.
-#
-#   CUDA_VERBOSE_BUILD (Default OFF)
-#   -- Set to ON to see all the commands used when building the CUDA file.  When
-#      using a Makefile generator the value defaults to VERBOSE (run make
-#      VERBOSE=1 to see output), although setting CUDA_VERBOSE_BUILD to ON will
-#      always print the output.
-#
-# The script creates the following macros (in alphabetical order)::
-#
-#   CUDA_ADD_CUFFT_TO_TARGET( cuda_target )
-#   -- Adds the cufft library to the target (can be any target).  Handles whether
-#      you are in emulation mode or not.
-#
-#   CUDA_ADD_CUBLAS_TO_TARGET( cuda_target )
-#   -- Adds the cublas library to the target (can be any target).  Handles
-#      whether you are in emulation mode or not.
-#
-#   CUDA_ADD_EXECUTABLE( cuda_target file0 file1 ...
-#                        [WIN32] [MACOSX_BUNDLE] [EXCLUDE_FROM_ALL] [OPTIONS ...] )
-#   -- Creates an executable "cuda_target" which is made up of the files
-#      specified.  All of the non CUDA C files are compiled using the standard
-#      build rules specified by CMAKE and the cuda files are compiled to object
-#      files using nvcc and the host compiler.  In addition CUDA_INCLUDE_DIRS is
-#      added automatically to include_directories().  Some standard CMake target
-#      calls can be used on the target after calling this macro
-#      (e.g. set_target_properties and target_link_libraries), but setting
-#      properties that adjust compilation flags will not affect code compiled by
-#      nvcc.  Such flags should be modified before calling CUDA_ADD_EXECUTABLE,
-#      CUDA_ADD_LIBRARY or CUDA_WRAP_SRCS.
-#
-#   CUDA_ADD_LIBRARY( cuda_target file0 file1 ...
-#                     [STATIC | SHARED | MODULE] [EXCLUDE_FROM_ALL] [OPTIONS ...] )
-#   -- Same as CUDA_ADD_EXECUTABLE except that a library is created.
-#
-#   CUDA_BUILD_CLEAN_TARGET()
-#   -- Creates a convenience target that deletes all the dependency files
-#      generated.  You should make clean after running this target to ensure the
-#      dependency files get regenerated.
-#
-#   CUDA_COMPILE( generated_files file0 file1 ... [STATIC | SHARED | MODULE]
-#                 [OPTIONS ...] )
-#   -- Returns a list of generated files from the input source files to be used
-#      with ADD_LIBRARY or ADD_EXECUTABLE.
-#
-#   CUDA_COMPILE_PTX( generated_files file0 file1 ... [OPTIONS ...] )
-#   -- Returns a list of PTX files generated from the input source files.
-#
-#   CUDA_COMPILE_FATBIN( generated_files file0 file1 ... [OPTIONS ...] )
-#   -- Returns a list of FATBIN files generated from the input source files.
-#
-#   CUDA_COMPILE_CUBIN( generated_files file0 file1 ... [OPTIONS ...] )
-#   -- Returns a list of CUBIN files generated from the input source files.
-#
-#   CUDA_COMPUTE_SEPARABLE_COMPILATION_OBJECT_FILE_NAME( output_file_var
-#                                                        cuda_target
-#                                                        object_files )
-#   -- Compute the name of the intermediate link file used for separable
-#      compilation.  This file name is typically passed into
-#      CUDA_LINK_SEPARABLE_COMPILATION_OBJECTS.  output_file_var is produced
-#      based on cuda_target the list of objects files that need separable
-#      compilation as specified by object_files.  If the object_files list is
-#      empty, then output_file_var will be empty.  This function is called
-#      automatically for CUDA_ADD_LIBRARY and CUDA_ADD_EXECUTABLE.  Note that
-#      this is a function and not a macro.
-#
-#   CUDA_INCLUDE_DIRECTORIES( path0 path1 ... )
-#   -- Sets the directories that should be passed to nvcc
-#      (e.g. nvcc -Ipath0 -Ipath1 ... ). These paths usually contain other .cu
-#      files.
-#
-#
-#   CUDA_LINK_SEPARABLE_COMPILATION_OBJECTS( output_file_var cuda_target
-#                                            nvcc_flags object_files)
-#   -- Generates the link object required by separable compilation from the given
-#      object files.  This is called automatically for CUDA_ADD_EXECUTABLE and
-#      CUDA_ADD_LIBRARY, but can be called manually when using CUDA_WRAP_SRCS
-#      directly.  When called from CUDA_ADD_LIBRARY or CUDA_ADD_EXECUTABLE the
-#      nvcc_flags passed in are the same as the flags passed in via the OPTIONS
-#      argument.  The only nvcc flag added automatically is the bitness flag as
-#      specified by CUDA_64_BIT_DEVICE_CODE.  Note that this is a function
-#      instead of a macro.
-#
-#   CUDA_SELECT_NVCC_ARCH_FLAGS(out_variable [target_CUDA_architectures])
-#   -- Selects GPU arch flags for nvcc based on target_CUDA_architectures
-#      target_CUDA_architectures : Auto | Common | All | LIST(ARCH_AND_PTX ...)
-#       - "Auto" detects local machine GPU compute arch at runtime.
-#       - "Common" and "All" cover common and entire subsets of architectures
-#      ARCH_AND_PTX : NAME | NUM.NUM | NUM.NUM(NUM.NUM) | NUM.NUM+PTX
-#      NAME: Fermi Kepler Maxwell Kepler+Tegra Kepler+Tesla Maxwell+Tegra Pascal
-#      NUM: Any number. Only those pairs are currently accepted by NVCC though:
-#            2.0 2.1 3.0 3.2 3.5 3.7 5.0 5.2 5.3 6.0 6.2
-#      Returns LIST of flags to be added to CUDA_NVCC_FLAGS in ${out_variable}
-#      Additionally, sets ${out_variable}_readable to the resulting numeric list
-#      Example:
-#       CUDA_SELECT_NVCC_ARCH_FLAGS(ARCH_FLAGS 3.0 3.5+PTX 5.2(5.0) Maxwell)
-#        LIST(APPEND CUDA_NVCC_FLAGS ${ARCH_FLAGS})
-#
-#      More info on CUDA architectures: https://en.wikipedia.org/wiki/CUDA
-#      Note that this is a function instead of a macro.
-#
-#   CUDA_WRAP_SRCS ( cuda_target format generated_files file0 file1 ...
-#                    [STATIC | SHARED | MODULE] [OPTIONS ...] )
-#   -- This is where all the magic happens.  CUDA_ADD_EXECUTABLE,
-#      CUDA_ADD_LIBRARY, CUDA_COMPILE, and CUDA_COMPILE_PTX all call this
-#      function under the hood.
-#
-#      Given the list of files (file0 file1 ... fileN) this macro generates
-#      custom commands that generate either PTX or linkable objects (use "PTX" or
-#      "OBJ" for the format argument to switch).  Files that don't end with .cu
-#      or have the HEADER_FILE_ONLY property are ignored.
-#
-#      The arguments passed in after OPTIONS are extra command line options to
-#      give to nvcc.  You can also specify per configuration options by
-#      specifying the name of the configuration followed by the options.  General
-#      options must precede configuration specific options.  Not all
-#      configurations need to be specified, only the ones provided will be used.
-#
-#         OPTIONS -DFLAG=2 "-DFLAG_OTHER=space in flag"
-#         DEBUG -g
-#         RELEASE --use_fast_math
-#         RELWITHDEBINFO --use_fast_math;-g
-#         MINSIZEREL --use_fast_math
-#
-#      For certain configurations (namely VS generating object files with
-#      CUDA_ATTACH_VS_BUILD_RULE_TO_CUDA_FILE set to ON), no generated file will
-#      be produced for the given cuda file.  This is because when you add the
-#      cuda file to Visual Studio it knows that this file produces an object file
-#      and will link in the resulting object file automatically.
-#
-#      This script will also generate a separate cmake script that is used at
-#      build time to invoke nvcc.  This is for several reasons.
-#
-#        1. nvcc can return negative numbers as return values which confuses
-#        Visual Studio into thinking that the command succeeded.  The script now
-#        checks the error codes and produces errors when there was a problem.
-#
-#        2. nvcc has been known to not delete incomplete results when it
-#        encounters problems.  This confuses build systems into thinking the
-#        target was generated when in fact an unusable file exists.  The script
-#        now deletes the output files if there was an error.
-#
-#        3. By putting all the options that affect the build into a file and then
-#        make the build rule dependent on the file, the output files will be
-#        regenerated when the options change.
-#
-#      This script also looks at optional arguments STATIC, SHARED, or MODULE to
-#      determine when to target the object compilation for a shared library.
-#      BUILD_SHARED_LIBS is ignored in CUDA_WRAP_SRCS, but it is respected in
-#      CUDA_ADD_LIBRARY.  On some systems special flags are added for building
-#      objects intended for shared libraries.  A preprocessor macro,
-#      <target_name>_EXPORTS is defined when a shared library compilation is
-#      detected.
-#
-#      Flags passed into add_definitions with -D or /D are passed along to nvcc.
-#
-#
-#
-# The script defines the following variables::
-#
-#   CUDA_VERSION_MAJOR    -- The major version of cuda as reported by nvcc.
-#   CUDA_VERSION_MINOR    -- The minor version.
-#   CUDA_VERSION
-#   CUDA_VERSION_STRING   -- CUDA_VERSION_MAJOR.CUDA_VERSION_MINOR
-#   CUDA_HAS_FP16         -- Whether a short float (float16,fp16) is supported.
-#
-#   CUDA_TOOLKIT_ROOT_DIR -- Path to the CUDA Toolkit (defined if not set).
-#   CUDA_SDK_ROOT_DIR     -- Path to the CUDA SDK.  Use this to find files in the
-#                            SDK.  This script will not directly support finding
-#                            specific libraries or headers, as that isn't
-#                            supported by NVIDIA.  If you want to change
-#                            libraries when the path changes see the
-#                            FindCUDA.cmake script for an example of how to clear
-#                            these variables.  There are also examples of how to
-#                            use the CUDA_SDK_ROOT_DIR to locate headers or
-#                            libraries, if you so choose (at your own risk).
-#   CUDA_INCLUDE_DIRS     -- Include directory for cuda headers.  Added automatically
-#                            for CUDA_ADD_EXECUTABLE and CUDA_ADD_LIBRARY.
-#   CUDA_LIBRARIES        -- Cuda RT library.
-#   CUDA_CUFFT_LIBRARIES  -- Device or emulation library for the Cuda FFT
-#                            implementation (alternative to:
-#                            CUDA_ADD_CUFFT_TO_TARGET macro)
-#   CUDA_CUBLAS_LIBRARIES -- Device or emulation library for the Cuda BLAS
-#                            implementation (alternative to:
-#                            CUDA_ADD_CUBLAS_TO_TARGET macro).
-#   CUDA_cudart_static_LIBRARY -- Statically linkable cuda runtime library.
-#                                 Only available for CUDA version 5.5+
-#   CUDA_cudadevrt_LIBRARY -- Device runtime library.
-#                             Required for separable compilation.
-#   CUDA_cupti_LIBRARY    -- CUDA Profiling Tools Interface library.
-#                            Only available for CUDA version 4.0+.
-#   CUDA_curand_LIBRARY   -- CUDA Random Number Generation library.
-#                            Only available for CUDA version 3.2+.
-#   CUDA_cusolver_LIBRARY -- CUDA Direct Solver library.
-#                            Only available for CUDA version 7.0+.
-#   CUDA_cusparse_LIBRARY -- CUDA Sparse Matrix library.
-#                            Only available for CUDA version 3.2+.
-#   CUDA_npp_LIBRARY      -- NVIDIA Performance Primitives lib.
-#                            Only available for CUDA version 4.0+.
-#   CUDA_nppc_LIBRARY     -- NVIDIA Performance Primitives lib (core).
-#                            Only available for CUDA version 5.5+.
-#   CUDA_nppi_LIBRARY     -- NVIDIA Performance Primitives lib (image processing).
-#                            Only available for CUDA version 5.5 - 8.0.
-#   CUDA_nppial_LIBRARY   -- NVIDIA Performance Primitives lib (image processing).
-#                            Only available for CUDA version 9.0.
-#   CUDA_nppicc_LIBRARY   -- NVIDIA Performance Primitives lib (image processing).
-#                            Only available for CUDA version 9.0.
-#   CUDA_nppicom_LIBRARY  -- NVIDIA Performance Primitives lib (image processing).
-#                            Only available for CUDA version 9.0.
-#   CUDA_nppidei_LIBRARY  -- NVIDIA Performance Primitives lib (image processing).
-#                            Only available for CUDA version 9.0.
-#   CUDA_nppif_LIBRARY    -- NVIDIA Performance Primitives lib (image processing).
-#                            Only available for CUDA version 9.0.
-#   CUDA_nppig_LIBRARY    -- NVIDIA Performance Primitives lib (image processing).
-#                            Only available for CUDA version 9.0.
-#   CUDA_nppim_LIBRARY    -- NVIDIA Performance Primitives lib (image processing).
-#                            Only available for CUDA version 9.0.
-#   CUDA_nppist_LIBRARY   -- NVIDIA Performance Primitives lib (image processing).
-#                            Only available for CUDA version 9.0.
-#   CUDA_nppisu_LIBRARY   -- NVIDIA Performance Primitives lib (image processing).
-#                            Only available for CUDA version 9.0.
-#   CUDA_nppitc_LIBRARY   -- NVIDIA Performance Primitives lib (image processing).
-#                            Only available for CUDA version 9.0.
-#   CUDA_npps_LIBRARY     -- NVIDIA Performance Primitives lib (signal processing).
-#                            Only available for CUDA version 5.5+.
-#   CUDA_nvcuvenc_LIBRARY -- CUDA Video Encoder library.
-#                            Only available for CUDA version 3.2+.
-#                            Windows only.
-#   CUDA_nvcuvid_LIBRARY  -- CUDA Video Decoder library.
-#                            Only available for CUDA version 3.2+.
-#                            Windows only.
-#
+#[=======================================================================[.rst:
+FindCUDA
+--------
+
+.. note::
+
+  The FindCUDA module has been superseded by first-class support
+  for the CUDA language in CMake.  It is no longer necessary to
+  use this module or call ``find_package(CUDA)``.  This module
+  now exists only for compatibility with projects that have not
+  been ported.
+
+  Instead, list ``CUDA`` among the languages named in the top-level
+  call to the :command:`project` command, or call the
+  :command:`enable_language` command with ``CUDA``.
+  Then one can add CUDA (``.cu``) sources to programs directly
+  in calls to :command:`add_library` and :command:`add_executable`.
+
+Tools for building CUDA C files: libraries and build dependencies.
+
+This script locates the NVIDIA CUDA C tools.  It should work on Linux,
+Windows, and macOS and should be reasonably up to date with CUDA C
+releases.
+
+This script makes use of the standard :command:`find_package` arguments of
+``<VERSION>``, ``REQUIRED`` and ``QUIET``.  ``CUDA_FOUND`` will report if an
+acceptable version of CUDA was found.
+
+The script will prompt the user to specify ``CUDA_TOOLKIT_ROOT_DIR`` if
+the prefix cannot be determined by the location of nvcc in the system
+path and ``REQUIRED`` is specified to :command:`find_package`.  To use
+a different installed version of the toolkit set the environment variable
+``CUDA_BIN_PATH`` before running cmake (e.g.
+``CUDA_BIN_PATH=/usr/local/cuda1.0`` instead of the default
+``/usr/local/cuda``) or set ``CUDA_TOOLKIT_ROOT_DIR`` after configuring.  If
+you change the value of ``CUDA_TOOLKIT_ROOT_DIR``, various components that
+depend on the path will be relocated.
+
+It might be necessary to set ``CUDA_TOOLKIT_ROOT_DIR`` manually on certain
+platforms, or to use a CUDA runtime not installed in the default
+location.  In newer versions of the toolkit the CUDA library is
+included with the graphics driver -- be sure that the driver version
+matches what is needed by the CUDA runtime version.
+
+The following variables affect the behavior of the macros in the
+script (in alphabetical order).  Note that any of these flags can be
+changed multiple times in the same directory before calling
+``CUDA_ADD_EXECUTABLE``, ``CUDA_ADD_LIBRARY``, ``CUDA_COMPILE``,
+``CUDA_COMPILE_PTX``, ``CUDA_COMPILE_FATBIN``, ``CUDA_COMPILE_CUBIN``
+or ``CUDA_WRAP_SRCS``::
+
+  CUDA_64_BIT_DEVICE_CODE (Default matches host bit size)
+  -- Set to ON to compile for 64 bit device code, OFF for 32 bit device code.
+     Note that making this different from the host code when generating object
+     or C files from CUDA code just won't work, because size_t gets defined by
+     nvcc in the generated source.  If you compile to PTX and then load the
+     file yourself, you can mix bit sizes between device and host.
+
+  CUDA_ATTACH_VS_BUILD_RULE_TO_CUDA_FILE (Default ON)
+  -- Set to ON if you want the custom build rule to be attached to the source
+     file in Visual Studio.  Turn OFF if you add the same cuda file to multiple
+     targets.
+
+     This allows the user to build the target from the CUDA file; however, bad
+     things can happen if the CUDA source file is added to multiple targets.
+     When performing parallel builds it is possible for the custom build
+     command to be run more than once and in parallel causing cryptic build
+     errors.  VS runs the rules for every source file in the target, and a
+     source can have only one rule no matter how many projects it is added to.
+     When the rule is run from multiple targets race conditions can occur on
+     the generated file.  Eventually everything will get built, but if the user
+     is unaware of this behavior, there may be confusion.  It would be nice if
+     this script could detect the reuse of source files across multiple targets
+     and turn the option off for the user, but no good solution could be found.
+
+  CUDA_BUILD_CUBIN (Default OFF)
+  -- Set to ON to enable and extra compilation pass with the -cubin option in
+     Device mode. The output is parsed and register, shared memory usage is
+     printed during build.
+
+  CUDA_BUILD_EMULATION (Default OFF for device mode)
+  -- Set to ON for Emulation mode. -D_DEVICEEMU is defined for CUDA C files
+     when CUDA_BUILD_EMULATION is TRUE.
+
+  CUDA_LINK_LIBRARIES_KEYWORD (Default "")
+   -- The <PRIVATE|PUBLIC|INTERFACE> keyword to use for internal
+      target_link_libraries calls. The default is to use no keyword which
+      uses the old "plain" form of target_link_libraries. Note that is matters
+      because whatever is used inside the FindCUDA module must also be used
+      outside - the two forms of target_link_libraries cannot be mixed.
+
+  CUDA_GENERATED_OUTPUT_DIR (Default CMAKE_CURRENT_BINARY_DIR)
+  -- Set to the path you wish to have the generated files placed.  If it is
+     blank output files will be placed in CMAKE_CURRENT_BINARY_DIR.
+     Intermediate files will always be placed in
+     CMAKE_CURRENT_BINARY_DIR/CMakeFiles.
+
+  CUDA_HOST_COMPILATION_CPP (Default ON)
+  -- Set to OFF for C compilation of host code.
+
+  CUDA_HOST_COMPILER (Default CMAKE_C_COMPILER)
+  -- Set the host compiler to be used by nvcc.  Ignored if -ccbin or
+     --compiler-bindir is already present in the CUDA_NVCC_FLAGS or
+     CUDA_NVCC_FLAGS_<CONFIG> variables.  For Visual Studio targets,
+     the host compiler is constructed with one or more visual studio macros
+     such as $(VCInstallDir), that expands out to the path when
+     the command is run from within VS.
+     If the CUDAHOSTCXX environment variable is set it will
+     be used as the default.
+
+  CUDA_NVCC_FLAGS
+  CUDA_NVCC_FLAGS_<CONFIG>
+  -- Additional NVCC command line arguments.  NOTE: multiple arguments must be
+     semi-colon delimited (e.g. --compiler-options;-Wall)
+
+  CUDA_PROPAGATE_HOST_FLAGS (Default ON)
+  -- Set to ON to propagate CMAKE_{C,CXX}_FLAGS and their configuration
+     dependent counterparts (e.g. CMAKE_C_FLAGS_DEBUG) automatically to the
+     host compiler through nvcc's -Xcompiler flag.  This helps make the
+     generated host code match the rest of the system better.  Sometimes
+     certain flags give nvcc problems, and this will help you turn the flag
+     propagation off.  This does not affect the flags supplied directly to nvcc
+     via CUDA_NVCC_FLAGS or through the OPTION flags specified through
+     CUDA_ADD_LIBRARY, CUDA_ADD_EXECUTABLE, or CUDA_WRAP_SRCS.  Flags used for
+     shared library compilation are not affected by this flag.
+
+  CUDA_SEPARABLE_COMPILATION (Default OFF)
+  -- If set this will enable separable compilation for all CUDA runtime object
+     files.  If used outside of CUDA_ADD_EXECUTABLE and CUDA_ADD_LIBRARY
+     (e.g. calling CUDA_WRAP_SRCS directly),
+     CUDA_COMPUTE_SEPARABLE_COMPILATION_OBJECT_FILE_NAME and
+     CUDA_LINK_SEPARABLE_COMPILATION_OBJECTS should be called.
+
+  CUDA_SOURCE_PROPERTY_FORMAT
+  -- If this source file property is set, it can override the format specified
+     to CUDA_WRAP_SRCS (OBJ, PTX, CUBIN, or FATBIN).  If an input source file
+     is not a .cu file, setting this file will cause it to be treated as a .cu
+     file. See documentation for set_source_files_properties on how to set
+     this property.
+
+  CUDA_USE_STATIC_CUDA_RUNTIME (Default ON)
+  -- When enabled the static version of the CUDA runtime library will be used
+     in CUDA_LIBRARIES.  If the version of CUDA configured doesn't support
+     this option, then it will be silently disabled.
+
+  CUDA_VERBOSE_BUILD (Default OFF)
+  -- Set to ON to see all the commands used when building the CUDA file.  When
+     using a Makefile generator the value defaults to VERBOSE (run make
+     VERBOSE=1 to see output), although setting CUDA_VERBOSE_BUILD to ON will
+     always print the output.
+
+The script creates the following macros (in alphabetical order)::
+
+  CUDA_ADD_CUFFT_TO_TARGET( cuda_target )
+  -- Adds the cufft library to the target (can be any target).  Handles whether
+     you are in emulation mode or not.
+
+  CUDA_ADD_CUBLAS_TO_TARGET( cuda_target )
+  -- Adds the cublas library to the target (can be any target).  Handles
+     whether you are in emulation mode or not.
+
+  CUDA_ADD_EXECUTABLE( cuda_target file0 file1 ...
+                       [WIN32] [MACOSX_BUNDLE] [EXCLUDE_FROM_ALL] [OPTIONS ...] )
+  -- Creates an executable "cuda_target" which is made up of the files
+     specified.  All of the non CUDA C files are compiled using the standard
+     build rules specified by CMAKE and the cuda files are compiled to object
+     files using nvcc and the host compiler.  In addition CUDA_INCLUDE_DIRS is
+     added automatically to include_directories().  Some standard CMake target
+     calls can be used on the target after calling this macro
+     (e.g. set_target_properties and target_link_libraries), but setting
+     properties that adjust compilation flags will not affect code compiled by
+     nvcc.  Such flags should be modified before calling CUDA_ADD_EXECUTABLE,
+     CUDA_ADD_LIBRARY or CUDA_WRAP_SRCS.
+
+  CUDA_ADD_LIBRARY( cuda_target file0 file1 ...
+                    [STATIC | SHARED | MODULE] [EXCLUDE_FROM_ALL] [OPTIONS ...] )
+  -- Same as CUDA_ADD_EXECUTABLE except that a library is created.
+
+  CUDA_BUILD_CLEAN_TARGET()
+  -- Creates a convenience target that deletes all the dependency files
+     generated.  You should make clean after running this target to ensure the
+     dependency files get regenerated.
+
+  CUDA_COMPILE( generated_files file0 file1 ... [STATIC | SHARED | MODULE]
+                [OPTIONS ...] )
+  -- Returns a list of generated files from the input source files to be used
+     with ADD_LIBRARY or ADD_EXECUTABLE.
+
+  CUDA_COMPILE_PTX( generated_files file0 file1 ... [OPTIONS ...] )
+  -- Returns a list of PTX files generated from the input source files.
+
+  CUDA_COMPILE_FATBIN( generated_files file0 file1 ... [OPTIONS ...] )
+  -- Returns a list of FATBIN files generated from the input source files.
+
+  CUDA_COMPILE_CUBIN( generated_files file0 file1 ... [OPTIONS ...] )
+  -- Returns a list of CUBIN files generated from the input source files.
+
+  CUDA_COMPUTE_SEPARABLE_COMPILATION_OBJECT_FILE_NAME( output_file_var
+                                                       cuda_target
+                                                       object_files )
+  -- Compute the name of the intermediate link file used for separable
+     compilation.  This file name is typically passed into
+     CUDA_LINK_SEPARABLE_COMPILATION_OBJECTS.  output_file_var is produced
+     based on cuda_target the list of objects files that need separable
+     compilation as specified by object_files.  If the object_files list is
+     empty, then output_file_var will be empty.  This function is called
+     automatically for CUDA_ADD_LIBRARY and CUDA_ADD_EXECUTABLE.  Note that
+     this is a function and not a macro.
+
+  CUDA_INCLUDE_DIRECTORIES( path0 path1 ... )
+  -- Sets the directories that should be passed to nvcc
+     (e.g. nvcc -Ipath0 -Ipath1 ... ). These paths usually contain other .cu
+     files.
+
+
+  CUDA_LINK_SEPARABLE_COMPILATION_OBJECTS( output_file_var cuda_target
+                                           nvcc_flags object_files)
+  -- Generates the link object required by separable compilation from the given
+     object files.  This is called automatically for CUDA_ADD_EXECUTABLE and
+     CUDA_ADD_LIBRARY, but can be called manually when using CUDA_WRAP_SRCS
+     directly.  When called from CUDA_ADD_LIBRARY or CUDA_ADD_EXECUTABLE the
+     nvcc_flags passed in are the same as the flags passed in via the OPTIONS
+     argument.  The only nvcc flag added automatically is the bitness flag as
+     specified by CUDA_64_BIT_DEVICE_CODE.  Note that this is a function
+     instead of a macro.
+
+  CUDA_SELECT_NVCC_ARCH_FLAGS(out_variable [target_CUDA_architectures])
+  -- Selects GPU arch flags for nvcc based on target_CUDA_architectures
+     target_CUDA_architectures : Auto | Common | All | LIST(ARCH_AND_PTX ...)
+      - "Auto" detects local machine GPU compute arch at runtime.
+      - "Common" and "All" cover common and entire subsets of architectures
+     ARCH_AND_PTX : NAME | NUM.NUM | NUM.NUM(NUM.NUM) | NUM.NUM+PTX
+     NAME: Fermi Kepler Maxwell Kepler+Tegra Kepler+Tesla Maxwell+Tegra Pascal
+     NUM: Any number. Only those pairs are currently accepted by NVCC though:
+           2.0 2.1 3.0 3.2 3.5 3.7 5.0 5.2 5.3 6.0 6.2
+     Returns LIST of flags to be added to CUDA_NVCC_FLAGS in ${out_variable}
+     Additionally, sets ${out_variable}_readable to the resulting numeric list
+     Example:
+      CUDA_SELECT_NVCC_ARCH_FLAGS(ARCH_FLAGS 3.0 3.5+PTX 5.2(5.0) Maxwell)
+       LIST(APPEND CUDA_NVCC_FLAGS ${ARCH_FLAGS})
+
+     More info on CUDA architectures: https://en.wikipedia.org/wiki/CUDA
+     Note that this is a function instead of a macro.
+
+  CUDA_WRAP_SRCS ( cuda_target format generated_files file0 file1 ...
+                   [STATIC | SHARED | MODULE] [OPTIONS ...] )
+  -- This is where all the magic happens.  CUDA_ADD_EXECUTABLE,
+     CUDA_ADD_LIBRARY, CUDA_COMPILE, and CUDA_COMPILE_PTX all call this
+     function under the hood.
+
+     Given the list of files (file0 file1 ... fileN) this macro generates
+     custom commands that generate either PTX or linkable objects (use "PTX" or
+     "OBJ" for the format argument to switch).  Files that don't end with .cu
+     or have the HEADER_FILE_ONLY property are ignored.
+
+     The arguments passed in after OPTIONS are extra command line options to
+     give to nvcc.  You can also specify per configuration options by
+     specifying the name of the configuration followed by the options.  General
+     options must precede configuration specific options.  Not all
+     configurations need to be specified, only the ones provided will be used.
+
+        OPTIONS -DFLAG=2 "-DFLAG_OTHER=space in flag"
+        DEBUG -g
+        RELEASE --use_fast_math
+        RELWITHDEBINFO --use_fast_math;-g
+        MINSIZEREL --use_fast_math
+
+     For certain configurations (namely VS generating object files with
+     CUDA_ATTACH_VS_BUILD_RULE_TO_CUDA_FILE set to ON), no generated file will
+     be produced for the given cuda file.  This is because when you add the
+     cuda file to Visual Studio it knows that this file produces an object file
+     and will link in the resulting object file automatically.
+
+     This script will also generate a separate cmake script that is used at
+     build time to invoke nvcc.  This is for several reasons.
+
+       1. nvcc can return negative numbers as return values which confuses
+       Visual Studio into thinking that the command succeeded.  The script now
+       checks the error codes and produces errors when there was a problem.
+
+       2. nvcc has been known to not delete incomplete results when it
+       encounters problems.  This confuses build systems into thinking the
+       target was generated when in fact an unusable file exists.  The script
+       now deletes the output files if there was an error.
+
+       3. By putting all the options that affect the build into a file and then
+       make the build rule dependent on the file, the output files will be
+       regenerated when the options change.
+
+     This script also looks at optional arguments STATIC, SHARED, or MODULE to
+     determine when to target the object compilation for a shared library.
+     BUILD_SHARED_LIBS is ignored in CUDA_WRAP_SRCS, but it is respected in
+     CUDA_ADD_LIBRARY.  On some systems special flags are added for building
+     objects intended for shared libraries.  A preprocessor macro,
+     <target_name>_EXPORTS is defined when a shared library compilation is
+     detected.
+
+     Flags passed into add_definitions with -D or /D are passed along to nvcc.
+
+
+
+The script defines the following variables::
+
+  CUDA_VERSION_MAJOR    -- The major version of cuda as reported by nvcc.
+  CUDA_VERSION_MINOR    -- The minor version.
+  CUDA_VERSION
+  CUDA_VERSION_STRING   -- CUDA_VERSION_MAJOR.CUDA_VERSION_MINOR
+  CUDA_HAS_FP16         -- Whether a short float (float16,fp16) is supported.
+
+  CUDA_TOOLKIT_ROOT_DIR -- Path to the CUDA Toolkit (defined if not set).
+  CUDA_SDK_ROOT_DIR     -- Path to the CUDA SDK.  Use this to find files in the
+                           SDK.  This script will not directly support finding
+                           specific libraries or headers, as that isn't
+                           supported by NVIDIA.  If you want to change
+                           libraries when the path changes see the
+                           FindCUDA.cmake script for an example of how to clear
+                           these variables.  There are also examples of how to
+                           use the CUDA_SDK_ROOT_DIR to locate headers or
+                           libraries, if you so choose (at your own risk).
+  CUDA_INCLUDE_DIRS     -- Include directory for cuda headers.  Added automatically
+                           for CUDA_ADD_EXECUTABLE and CUDA_ADD_LIBRARY.
+  CUDA_LIBRARIES        -- Cuda RT library.
+  CUDA_CUFFT_LIBRARIES  -- Device or emulation library for the Cuda FFT
+                           implementation (alternative to:
+                           CUDA_ADD_CUFFT_TO_TARGET macro)
+  CUDA_CUBLAS_LIBRARIES -- Device or emulation library for the Cuda BLAS
+                           implementation (alternative to:
+                           CUDA_ADD_CUBLAS_TO_TARGET macro).
+  CUDA_cudart_static_LIBRARY -- Statically linkable cuda runtime library.
+                                Only available for CUDA version 5.5+
+  CUDA_cudadevrt_LIBRARY -- Device runtime library.
+                            Required for separable compilation.
+  CUDA_cupti_LIBRARY    -- CUDA Profiling Tools Interface library.
+                           Only available for CUDA version 4.0+.
+  CUDA_curand_LIBRARY   -- CUDA Random Number Generation library.
+                           Only available for CUDA version 3.2+.
+  CUDA_cusolver_LIBRARY -- CUDA Direct Solver library.
+                           Only available for CUDA version 7.0+.
+  CUDA_cusparse_LIBRARY -- CUDA Sparse Matrix library.
+                           Only available for CUDA version 3.2+.
+  CUDA_npp_LIBRARY      -- NVIDIA Performance Primitives lib.
+                           Only available for CUDA version 4.0+.
+  CUDA_nppc_LIBRARY     -- NVIDIA Performance Primitives lib (core).
+                           Only available for CUDA version 5.5+.
+  CUDA_nppi_LIBRARY     -- NVIDIA Performance Primitives lib (image processing).
+                           Only available for CUDA version 5.5 - 8.0.
+  CUDA_nppial_LIBRARY   -- NVIDIA Performance Primitives lib (image processing).
+                           Only available for CUDA version 9.0.
+  CUDA_nppicc_LIBRARY   -- NVIDIA Performance Primitives lib (image processing).
+                           Only available for CUDA version 9.0.
+  CUDA_nppicom_LIBRARY  -- NVIDIA Performance Primitives lib (image processing).
+                           Only available for CUDA version 9.0.
+  CUDA_nppidei_LIBRARY  -- NVIDIA Performance Primitives lib (image processing).
+                           Only available for CUDA version 9.0.
+  CUDA_nppif_LIBRARY    -- NVIDIA Performance Primitives lib (image processing).
+                           Only available for CUDA version 9.0.
+  CUDA_nppig_LIBRARY    -- NVIDIA Performance Primitives lib (image processing).
+                           Only available for CUDA version 9.0.
+  CUDA_nppim_LIBRARY    -- NVIDIA Performance Primitives lib (image processing).
+                           Only available for CUDA version 9.0.
+  CUDA_nppist_LIBRARY   -- NVIDIA Performance Primitives lib (image processing).
+                           Only available for CUDA version 9.0.
+  CUDA_nppisu_LIBRARY   -- NVIDIA Performance Primitives lib (image processing).
+                           Only available for CUDA version 9.0.
+  CUDA_nppitc_LIBRARY   -- NVIDIA Performance Primitives lib (image processing).
+                           Only available for CUDA version 9.0.
+  CUDA_npps_LIBRARY     -- NVIDIA Performance Primitives lib (signal processing).
+                           Only available for CUDA version 5.5+.
+  CUDA_nvcuvenc_LIBRARY -- CUDA Video Encoder library.
+                           Only available for CUDA version 3.2+.
+                           Windows only.
+  CUDA_nvcuvid_LIBRARY  -- CUDA Video Decoder library.
+                           Only available for CUDA version 3.2+.
+                           Windows only.
+
+#]=======================================================================]
 
 #   James Bigler, NVIDIA Corp (nvidia.com - jbigler)
 #   Abe Stephens, SCI Institute -- http://www.sci.utah.edu/~abe/FindCuda.html
diff --git a/Modules/FindCURL.cmake b/Modules/FindCURL.cmake
index 60ddf7b..a4b238d 100644
--- a/Modules/FindCURL.cmake
+++ b/Modules/FindCURL.cmake
@@ -1,34 +1,35 @@
 # Distributed under the OSI-approved BSD 3-Clause License.  See accompanying
 # file Copyright.txt or https://cmake.org/licensing for details.
 
-#.rst:
-# FindCURL
-# --------
-#
-# Find the native CURL headers and libraries.
-#
-# IMPORTED Targets
-# ^^^^^^^^^^^^^^^^
-#
-# This module defines :prop_tgt:`IMPORTED` target ``CURL::libcurl``, if
-# curl has been found.
-#
-# Result Variables
-# ^^^^^^^^^^^^^^^^
-#
-# This module defines the following variables:
-#
-# ``CURL_FOUND``
-#   True if curl found.
-#
-# ``CURL_INCLUDE_DIRS``
-#   where to find curl/curl.h, etc.
-#
-# ``CURL_LIBRARIES``
-#   List of libraries when using curl.
-#
-# ``CURL_VERSION_STRING``
-#   The version of curl found.
+#[=======================================================================[.rst:
+FindCURL
+--------
+
+Find the native CURL headers and libraries.
+
+IMPORTED Targets
+^^^^^^^^^^^^^^^^
+
+This module defines :prop_tgt:`IMPORTED` target ``CURL::libcurl``, if
+curl has been found.
+
+Result Variables
+^^^^^^^^^^^^^^^^
+
+This module defines the following variables:
+
+``CURL_FOUND``
+  True if curl found.
+
+``CURL_INCLUDE_DIRS``
+  where to find curl/curl.h, etc.
+
+``CURL_LIBRARIES``
+  List of libraries when using curl.
+
+``CURL_VERSION_STRING``
+  The version of curl found.
+#]=======================================================================]
 
 # Look for the header file.
 find_path(CURL_INCLUDE_DIR NAMES curl/curl.h)
diff --git a/Modules/FindCVS.cmake b/Modules/FindCVS.cmake
index d59dfb0..89dbc0e 100644
--- a/Modules/FindCVS.cmake
+++ b/Modules/FindCVS.cmake
@@ -1,27 +1,28 @@
 # Distributed under the OSI-approved BSD 3-Clause License.  See accompanying
 # file Copyright.txt or https://cmake.org/licensing for details.
 
-#.rst:
-# FindCVS
-# -------
-#
-#
-#
-# The module defines the following variables:
-#
-# ::
-#
-#    CVS_EXECUTABLE - path to cvs command line client
-#    CVS_FOUND - true if the command line client was found
-#
-# Example usage:
-#
-# ::
-#
-#    find_package(CVS)
-#    if(CVS_FOUND)
-#      message("CVS found: ${CVS_EXECUTABLE}")
-#    endif()
+#[=======================================================================[.rst:
+FindCVS
+-------
+
+
+
+The module defines the following variables:
+
+::
+
+   CVS_EXECUTABLE - path to cvs command line client
+   CVS_FOUND - true if the command line client was found
+
+Example usage:
+
+::
+
+   find_package(CVS)
+   if(CVS_FOUND)
+     message("CVS found: ${CVS_EXECUTABLE}")
+   endif()
+#]=======================================================================]
 
 # CVSNT
 
diff --git a/Modules/FindCoin3D.cmake b/Modules/FindCoin3D.cmake
index f11903d..301e70b 100644
--- a/Modules/FindCoin3D.cmake
+++ b/Modules/FindCoin3D.cmake
@@ -1,22 +1,23 @@
 # Distributed under the OSI-approved BSD 3-Clause License.  See accompanying
 # file Copyright.txt or https://cmake.org/licensing for details.
 
-#.rst:
-# FindCoin3D
-# ----------
-#
-# Find Coin3D (Open Inventor)
-#
-# Coin3D is an implementation of the Open Inventor API.  It provides
-# data structures and algorithms for 3D visualization.
-#
-# This module defines the following variables
-#
-# ::
-#
-#   COIN3D_FOUND         - system has Coin3D - Open Inventor
-#   COIN3D_INCLUDE_DIRS  - where the Inventor include directory can be found
-#   COIN3D_LIBRARIES     - Link to this to use Coin3D
+#[=======================================================================[.rst:
+FindCoin3D
+----------
+
+Find Coin3D (Open Inventor)
+
+Coin3D is an implementation of the Open Inventor API.  It provides
+data structures and algorithms for 3D visualization.
+
+This module defines the following variables
+
+::
+
+  COIN3D_FOUND         - system has Coin3D - Open Inventor
+  COIN3D_INCLUDE_DIRS  - where the Inventor include directory can be found
+  COIN3D_LIBRARIES     - Link to this to use Coin3D
+#]=======================================================================]
 
 if (WIN32)
   if (CYGWIN)
diff --git a/Modules/FindCups.cmake b/Modules/FindCups.cmake
index 13d3b98..10ce229 100644
--- a/Modules/FindCups.cmake
+++ b/Modules/FindCups.cmake
@@ -1,22 +1,23 @@
 # Distributed under the OSI-approved BSD 3-Clause License.  See accompanying
 # file Copyright.txt or https://cmake.org/licensing for details.
 
-#.rst:
-# FindCups
-# --------
-#
-# Try to find the Cups printing system
-#
-# Once done this will define
-#
-# ::
-#
-#   CUPS_FOUND - system has Cups
-#   CUPS_INCLUDE_DIR - the Cups include directory
-#   CUPS_LIBRARIES - Libraries needed to use Cups
-#   CUPS_VERSION_STRING - version of Cups found (since CMake 2.8.8)
-#   Set CUPS_REQUIRE_IPP_DELETE_ATTRIBUTE to TRUE if you need a version which
-#   features this function (i.e. at least 1.1.19)
+#[=======================================================================[.rst:
+FindCups
+--------
+
+Try to find the Cups printing system
+
+Once done this will define
+
+::
+
+  CUPS_FOUND - system has Cups
+  CUPS_INCLUDE_DIR - the Cups include directory
+  CUPS_LIBRARIES - Libraries needed to use Cups
+  CUPS_VERSION_STRING - version of Cups found (since CMake 2.8.8)
+  Set CUPS_REQUIRE_IPP_DELETE_ATTRIBUTE to TRUE if you need a version which
+  features this function (i.e. at least 1.1.19)
+#]=======================================================================]
 
 find_path(CUPS_INCLUDE_DIR cups/cups.h )
 
diff --git a/Modules/FindCurses.cmake b/Modules/FindCurses.cmake
index 4f59d2c..c225847 100644
--- a/Modules/FindCurses.cmake
+++ b/Modules/FindCurses.cmake
@@ -1,46 +1,47 @@
 # Distributed under the OSI-approved BSD 3-Clause License.  See accompanying
 # file Copyright.txt or https://cmake.org/licensing for details.
 
-#.rst:
-# FindCurses
-# ----------
-#
-# Find the curses or ncurses include file and library.
-#
-# Result Variables
-# ^^^^^^^^^^^^^^^^
-#
-# This module defines the following variables:
-#
-# ``CURSES_FOUND``
-#   True if Curses is found.
-# ``CURSES_INCLUDE_DIRS``
-#   The include directories needed to use Curses.
-# ``CURSES_LIBRARIES``
-#   The libraries needed to use Curses.
-# ``CURSES_HAVE_CURSES_H``
-#   True if curses.h is available.
-# ``CURSES_HAVE_NCURSES_H``
-#   True if ncurses.h is available.
-# ``CURSES_HAVE_NCURSES_NCURSES_H``
-#   True if ``ncurses/ncurses.h`` is available.
-# ``CURSES_HAVE_NCURSES_CURSES_H``
-#   True if ``ncurses/curses.h`` is available.
-#
-# Set ``CURSES_NEED_NCURSES`` to ``TRUE`` before the
-# ``find_package(Curses)`` call if NCurses functionality is required.
-# Set ``CURSES_NEED_WIDE`` to ``TRUE`` before the
-# ``find_package(Curses)`` call if unicode functionality is required.
-#
-# Backward Compatibility
-# ^^^^^^^^^^^^^^^^^^^^^^
-#
-# The following variable are provided for backward compatibility:
-#
-# ``CURSES_INCLUDE_DIR``
-#   Path to Curses include.  Use ``CURSES_INCLUDE_DIRS`` instead.
-# ``CURSES_LIBRARY``
-#   Path to Curses library.  Use ``CURSES_LIBRARIES`` instead.
+#[=======================================================================[.rst:
+FindCurses
+----------
+
+Find the curses or ncurses include file and library.
+
+Result Variables
+^^^^^^^^^^^^^^^^
+
+This module defines the following variables:
+
+``CURSES_FOUND``
+  True if Curses is found.
+``CURSES_INCLUDE_DIRS``
+  The include directories needed to use Curses.
+``CURSES_LIBRARIES``
+  The libraries needed to use Curses.
+``CURSES_HAVE_CURSES_H``
+  True if curses.h is available.
+``CURSES_HAVE_NCURSES_H``
+  True if ncurses.h is available.
+``CURSES_HAVE_NCURSES_NCURSES_H``
+  True if ``ncurses/ncurses.h`` is available.
+``CURSES_HAVE_NCURSES_CURSES_H``
+  True if ``ncurses/curses.h`` is available.
+
+Set ``CURSES_NEED_NCURSES`` to ``TRUE`` before the
+``find_package(Curses)`` call if NCurses functionality is required.
+Set ``CURSES_NEED_WIDE`` to ``TRUE`` before the
+``find_package(Curses)`` call if unicode functionality is required.
+
+Backward Compatibility
+^^^^^^^^^^^^^^^^^^^^^^
+
+The following variable are provided for backward compatibility:
+
+``CURSES_INCLUDE_DIR``
+  Path to Curses include.  Use ``CURSES_INCLUDE_DIRS`` instead.
+``CURSES_LIBRARY``
+  Path to Curses library.  Use ``CURSES_LIBRARIES`` instead.
+#]=======================================================================]
 
 include(${CMAKE_CURRENT_LIST_DIR}/CheckLibraryExists.cmake)
 
diff --git a/Modules/FindCxxTest.cmake b/Modules/FindCxxTest.cmake
index 25454fd..4eec5fc 100644
--- a/Modules/FindCxxTest.cmake
+++ b/Modules/FindCxxTest.cmake
@@ -1,142 +1,143 @@
 # Distributed under the OSI-approved BSD 3-Clause License.  See accompanying
 # file Copyright.txt or https://cmake.org/licensing for details.
 
-#.rst:
-# FindCxxTest
-# -----------
-#
-# Find CxxTest
-#
-# Find the CxxTest suite and declare a helper macro for creating unit
-# tests and integrating them with CTest.  For more details on CxxTest
-# see http://cxxtest.tigris.org
-#
-# INPUT Variables
-#
-# ::
-#
-#    CXXTEST_USE_PYTHON [deprecated since 1.3]
-#        Only used in the case both Python & Perl
-#        are detected on the system to control
-#        which CxxTest code generator is used.
-#        Valid only for CxxTest version 3.
-#
-#
-#
-# ::
-#
-#        NOTE: In older versions of this Find Module,
-#        this variable controlled if the Python test
-#        generator was used instead of the Perl one,
-#        regardless of which scripting language the
-#        user had installed.
-#
-#
-#
-# ::
-#
-#    CXXTEST_TESTGEN_ARGS (since CMake 2.8.3)
-#        Specify a list of options to pass to the CxxTest code
-#        generator.  If not defined, --error-printer is
-#        passed.
-#
-#
-#
-# OUTPUT Variables
-#
-# ::
-#
-#    CXXTEST_FOUND
-#        True if the CxxTest framework was found
-#    CXXTEST_INCLUDE_DIRS
-#        Where to find the CxxTest include directory
-#    CXXTEST_PERL_TESTGEN_EXECUTABLE
-#        The perl-based test generator
-#    CXXTEST_PYTHON_TESTGEN_EXECUTABLE
-#        The python-based test generator
-#    CXXTEST_TESTGEN_EXECUTABLE (since CMake 2.8.3)
-#        The test generator that is actually used (chosen using user preferences
-#        and interpreters found in the system)
-#    CXXTEST_TESTGEN_INTERPRETER (since CMake 2.8.3)
-#        The full path to the Perl or Python executable on the system, on
-#        platforms where the script cannot be executed using its shebang line.
-#
-#
-#
-# MACROS for optional use by CMake users:
-#
-# ::
-#
-#     CXXTEST_ADD_TEST(<test_name> <gen_source_file> <input_files_to_testgen...>)
-#        Creates a CxxTest runner and adds it to the CTest testing suite
-#        Parameters:
-#            test_name               The name of the test
-#            gen_source_file         The generated source filename to be
-#                                    generated by CxxTest
-#            input_files_to_testgen  The list of header files containing the
-#                                    CxxTest::TestSuite's to be included in
-#                                    this runner
-#
-#
-#
-# ::
-#
-#        #==============
-#        Example Usage:
-#
-#
-#
-# ::
-#
-#            find_package(CxxTest)
-#            if(CXXTEST_FOUND)
-#                include_directories(${CXXTEST_INCLUDE_DIR})
-#                enable_testing()
-#
-#
-#
-# ::
-#
-#                CXXTEST_ADD_TEST(unittest_foo foo_test.cc
-#                                  ${CMAKE_CURRENT_SOURCE_DIR}/foo_test.h)
-#                target_link_libraries(unittest_foo foo) # as needed
-#            endif()
-#
-#
-#
-# ::
-#
-#               This will (if CxxTest is found):
-#               1. Invoke the testgen executable to autogenerate foo_test.cc in the
-#                  binary tree from "foo_test.h" in the current source directory.
-#               2. Create an executable and test called unittest_foo.
-#
-#
-#
-# ::
-#
-#       #=============
-#       Example foo_test.h:
-#
-#
-#
-# ::
-#
-#           #include <cxxtest/TestSuite.h>
-#
-#
-#
-# ::
-#
-#           class MyTestSuite : public CxxTest::TestSuite
-#           {
-#           public:
-#              void testAddition( void )
-#              {
-#                 TS_ASSERT( 1 + 1 > 1 );
-#                 TS_ASSERT_EQUALS( 1 + 1, 2 );
-#              }
-#           };
+#[=======================================================================[.rst:
+FindCxxTest
+-----------
+
+Find CxxTest
+
+Find the CxxTest suite and declare a helper macro for creating unit
+tests and integrating them with CTest.  For more details on CxxTest
+see http://cxxtest.tigris.org
+
+INPUT Variables
+
+::
+
+   CXXTEST_USE_PYTHON [deprecated since 1.3]
+       Only used in the case both Python & Perl
+       are detected on the system to control
+       which CxxTest code generator is used.
+       Valid only for CxxTest version 3.
+
+
+
+::
+
+       NOTE: In older versions of this Find Module,
+       this variable controlled if the Python test
+       generator was used instead of the Perl one,
+       regardless of which scripting language the
+       user had installed.
+
+
+
+::
+
+   CXXTEST_TESTGEN_ARGS (since CMake 2.8.3)
+       Specify a list of options to pass to the CxxTest code
+       generator.  If not defined, --error-printer is
+       passed.
+
+
+
+OUTPUT Variables
+
+::
+
+   CXXTEST_FOUND
+       True if the CxxTest framework was found
+   CXXTEST_INCLUDE_DIRS
+       Where to find the CxxTest include directory
+   CXXTEST_PERL_TESTGEN_EXECUTABLE
+       The perl-based test generator
+   CXXTEST_PYTHON_TESTGEN_EXECUTABLE
+       The python-based test generator
+   CXXTEST_TESTGEN_EXECUTABLE (since CMake 2.8.3)
+       The test generator that is actually used (chosen using user preferences
+       and interpreters found in the system)
+   CXXTEST_TESTGEN_INTERPRETER (since CMake 2.8.3)
+       The full path to the Perl or Python executable on the system, on
+       platforms where the script cannot be executed using its shebang line.
+
+
+
+MACROS for optional use by CMake users:
+
+::
+
+    CXXTEST_ADD_TEST(<test_name> <gen_source_file> <input_files_to_testgen...>)
+       Creates a CxxTest runner and adds it to the CTest testing suite
+       Parameters:
+           test_name               The name of the test
+           gen_source_file         The generated source filename to be
+                                   generated by CxxTest
+           input_files_to_testgen  The list of header files containing the
+                                   CxxTest::TestSuite's to be included in
+                                   this runner
+
+
+
+::
+
+       #==============
+       Example Usage:
+
+
+
+::
+
+           find_package(CxxTest)
+           if(CXXTEST_FOUND)
+               include_directories(${CXXTEST_INCLUDE_DIR})
+               enable_testing()
+
+
+
+::
+
+               CXXTEST_ADD_TEST(unittest_foo foo_test.cc
+                                 ${CMAKE_CURRENT_SOURCE_DIR}/foo_test.h)
+               target_link_libraries(unittest_foo foo) # as needed
+           endif()
+
+
+
+::
+
+              This will (if CxxTest is found):
+              1. Invoke the testgen executable to autogenerate foo_test.cc in the
+                 binary tree from "foo_test.h" in the current source directory.
+              2. Create an executable and test called unittest_foo.
+
+
+
+::
+
+      #=============
+      Example foo_test.h:
+
+
+
+::
+
+          #include <cxxtest/TestSuite.h>
+
+
+
+::
+
+          class MyTestSuite : public CxxTest::TestSuite
+          {
+          public:
+             void testAddition( void )
+             {
+                TS_ASSERT( 1 + 1 > 1 );
+                TS_ASSERT_EQUALS( 1 + 1, 2 );
+             }
+          };
+#]=======================================================================]
 
 # Version 1.4 (11/18/10) (CMake 2.8.4)
 #     Issue 11384: Added support to the CXX_ADD_TEST macro so header
diff --git a/Modules/FindCygwin.cmake b/Modules/FindCygwin.cmake
index 092a3bd..8811623 100644
--- a/Modules/FindCygwin.cmake
+++ b/Modules/FindCygwin.cmake
@@ -1,11 +1,12 @@
 # Distributed under the OSI-approved BSD 3-Clause License.  See accompanying
 # file Copyright.txt or https://cmake.org/licensing for details.
 
-#.rst:
-# FindCygwin
-# ----------
-#
-# this module looks for Cygwin
+#[=======================================================================[.rst:
+FindCygwin
+----------
+
+this module looks for Cygwin
+#]=======================================================================]
 
 if (WIN32)
   if(CYGWIN_INSTALL_PATH)
diff --git a/Modules/FindDCMTK.cmake b/Modules/FindDCMTK.cmake
index 39c1a5b..302c089 100644
--- a/Modules/FindDCMTK.cmake
+++ b/Modules/FindDCMTK.cmake
@@ -1,82 +1,83 @@
 # Distributed under the OSI-approved BSD 3-Clause License.  See accompanying
 # file Copyright.txt or https://cmake.org/licensing for details.
 
-#.rst:
-# FindDCMTK
-# ---------
-#
-# Find DCMTK libraries and applications
-#
-# The module defines the following variables::
-#
-#  DCMTK_INCLUDE_DIRS  - Directories to include to use DCMTK
-#  DCMTK_LIBRARIES     - Files to link against to use DCMTK
-#  DCMTK_FOUND         - If false, don't try to use DCMTK
-#  DCMTK_DIR           - (optional) Source directory for DCMTK
-#
-# Compatibility
-# ^^^^^^^^^^^^^
-#
-# This module is able to find a version of DCMTK that does or does not export
-# a *DCMTKConfig.cmake* file. It applies a two step process:
-#
-# * Step 1:  Attempt to find DCMTK version providing a *DCMTKConfig.cmake* file.
-# * Step 2:  If step 1 failed, rely on *FindDCMTK.cmake* to set `DCMTK_*` variables details below.
-#
-#
-# `Recent DCMTK
-# <http://git.dcmtk.org/web?p=dcmtk.git;a=commit;h=662ae187c493c6b9a73dd5e3875372cebd0c11fe>`_
-# provides a *DCMTKConfig.cmake* :manual:`package configuration file
-# <cmake-packages(7)>`. To exclusively use the package configuration file
-# (recommended when possible), pass the `NO_MODULE` option to
-# :command:`find_package`. For example, `find_package(DCMTK NO_MODULE)`.
-# This requires official DCMTK snapshot *3.6.1_20140617* or newer.
-#
-#
-# Until all clients update to the more recent DCMTK, build systems will need
-# to support different versions of DCMTK.
-#
-# On any given system, the following combinations of DCMTK versions could be
-# considered:
-#
-# +--------+---------------------+-----------------------+-------------------+
-# |        |   SYSTEM DCMTK      |      LOCAL DCMTK      |     Supported ?   |
-# +--------+---------------------+-----------------------+-------------------+
-# | Case A |   NA                |      [ ] DCMTKConfig  |         YES       |
-# +--------+---------------------+-----------------------+-------------------+
-# | Case B |   NA                |      [X] DCMTKConfig  |         YES       |
-# +--------+---------------------+-----------------------+-------------------+
-# | Case C |   [ ] DCMTKConfig   |      NA               |         YES       |
-# +--------+---------------------+-----------------------+-------------------+
-# | Case D |   [X] DCMTKConfig   |      NA               |         YES       |
-# +--------+---------------------+-----------------------+-------------------+
-# | Case E |   [ ] DCMTKConfig   |      [ ] DCMTKConfig  |         YES (*)   |
-# +--------+---------------------+-----------------------+-------------------+
-# | Case F |   [X] DCMTKConfig   |      [ ] DCMTKConfig  |         NO        |
-# +--------+---------------------+-----------------------+-------------------+
-# | Case G |   [ ] DCMTKConfig   |      [X] DCMTKConfig  |         YES       |
-# +--------+---------------------+-----------------------+-------------------+
-# | Case H |   [X] DCMTKConfig   |      [X] DCMTKConfig  |         YES       |
-# +--------+---------------------+-----------------------+-------------------+
-#
-#  (*) See Troubleshooting section.
-#
-# Legend:
-#
-#   NA ...............: Means that no System or Local DCMTK is available
-#
-#   [ ] DCMTKConfig ..: Means that the version of DCMTK does NOT export a DCMTKConfig.cmake file.
-#
-#   [X] DCMTKConfig ..: Means that the version of DCMTK exports a DCMTKConfig.cmake file.
-#
-#
-# Troubleshooting
-# ^^^^^^^^^^^^^^^
-#
-# What to do if my project finds a different version of DCMTK?
-#
-# Remove DCMTK entry from the CMake cache per :command:`find_package`
-# documentation.
+#[=======================================================================[.rst:
+FindDCMTK
+---------
+
+Find DCMTK libraries and applications
+
+The module defines the following variables::
+
+ DCMTK_INCLUDE_DIRS  - Directories to include to use DCMTK
+ DCMTK_LIBRARIES     - Files to link against to use DCMTK
+ DCMTK_FOUND         - If false, don't try to use DCMTK
+ DCMTK_DIR           - (optional) Source directory for DCMTK
+
+Compatibility
+^^^^^^^^^^^^^
+
+This module is able to find a version of DCMTK that does or does not export
+a *DCMTKConfig.cmake* file. It applies a two step process:
+
+* Step 1:  Attempt to find DCMTK version providing a *DCMTKConfig.cmake* file.
+* Step 2:  If step 1 failed, rely on *FindDCMTK.cmake* to set `DCMTK_*` variables details below.
+
+
+`Recent DCMTK
+<http://git.dcmtk.org/web?p=dcmtk.git;a=commit;h=662ae187c493c6b9a73dd5e3875372cebd0c11fe>`_
+provides a *DCMTKConfig.cmake* :manual:`package configuration file
+<cmake-packages(7)>`. To exclusively use the package configuration file
+(recommended when possible), pass the `NO_MODULE` option to
+:command:`find_package`. For example, `find_package(DCMTK NO_MODULE)`.
+This requires official DCMTK snapshot *3.6.1_20140617* or newer.
+
+
+Until all clients update to the more recent DCMTK, build systems will need
+to support different versions of DCMTK.
+
+On any given system, the following combinations of DCMTK versions could be
+considered:
+
++--------+---------------------+-----------------------+-------------------+
+|        |   SYSTEM DCMTK      |      LOCAL DCMTK      |     Supported ?   |
++--------+---------------------+-----------------------+-------------------+
+| Case A |   NA                |      [ ] DCMTKConfig  |         YES       |
++--------+---------------------+-----------------------+-------------------+
+| Case B |   NA                |      [X] DCMTKConfig  |         YES       |
++--------+---------------------+-----------------------+-------------------+
+| Case C |   [ ] DCMTKConfig   |      NA               |         YES       |
++--------+---------------------+-----------------------+-------------------+
+| Case D |   [X] DCMTKConfig   |      NA               |         YES       |
++--------+---------------------+-----------------------+-------------------+
+| Case E |   [ ] DCMTKConfig   |      [ ] DCMTKConfig  |         YES (*)   |
++--------+---------------------+-----------------------+-------------------+
+| Case F |   [X] DCMTKConfig   |      [ ] DCMTKConfig  |         NO        |
++--------+---------------------+-----------------------+-------------------+
+| Case G |   [ ] DCMTKConfig   |      [X] DCMTKConfig  |         YES       |
++--------+---------------------+-----------------------+-------------------+
+| Case H |   [X] DCMTKConfig   |      [X] DCMTKConfig  |         YES       |
++--------+---------------------+-----------------------+-------------------+
+
+ (*) See Troubleshooting section.
+
+Legend:
+
+  NA ...............: Means that no System or Local DCMTK is available
+
+  [ ] DCMTKConfig ..: Means that the version of DCMTK does NOT export a DCMTKConfig.cmake file.
+
+  [X] DCMTKConfig ..: Means that the version of DCMTK exports a DCMTKConfig.cmake file.
+
+
+Troubleshooting
+^^^^^^^^^^^^^^^
+
+What to do if my project finds a different version of DCMTK?
+
+Remove DCMTK entry from the CMake cache per :command:`find_package`
+documentation.
+#]=======================================================================]
 
 #
 # Written for VXL by Amitha Perera.
diff --git a/Modules/FindDart.cmake b/Modules/FindDart.cmake
index acd4ef6..0492578 100644
--- a/Modules/FindDart.cmake
+++ b/Modules/FindDart.cmake
@@ -1,14 +1,15 @@
 # Distributed under the OSI-approved BSD 3-Clause License.  See accompanying
 # file Copyright.txt or https://cmake.org/licensing for details.
 
-#.rst:
-# FindDart
-# --------
-#
-# Find DART
-#
-# This module looks for the dart testing software and sets DART_ROOT to
-# point to where it found it.
+#[=======================================================================[.rst:
+FindDart
+--------
+
+Find DART
+
+This module looks for the dart testing software and sets DART_ROOT to
+point to where it found it.
+#]=======================================================================]
 
 find_path(DART_ROOT README.INSTALL
     HINTS
diff --git a/Modules/FindDevIL.cmake b/Modules/FindDevIL.cmake
index e904a30..9984943 100644
--- a/Modules/FindDevIL.cmake
+++ b/Modules/FindDevIL.cmake
@@ -1,35 +1,36 @@
 # Distributed under the OSI-approved BSD 3-Clause License.  See accompanying
 # file Copyright.txt or https://cmake.org/licensing for details.
 
-#.rst:
-# FindDevIL
-# ---------
-#
-#
-#
-# This module locates the developer's image library.
-# http://openil.sourceforge.net/
-#
-# This module sets:
-#
-# ::
-#
-#    IL_LIBRARIES -   the name of the IL library. These include the full path to
-#                     the core DevIL library. This one has to be linked into the
-#                     application.
-#    ILU_LIBRARIES -  the name of the ILU library. Again, the full path. This
-#                     library is for filters and effects, not actual loading. It
-#                     doesn't have to be linked if the functionality it provides
-#                     is not used.
-#    ILUT_LIBRARIES - the name of the ILUT library. Full path. This part of the
-#                     library interfaces with OpenGL. It is not strictly needed
-#                     in applications.
-#    IL_INCLUDE_DIR - where to find the il.h, ilu.h and ilut.h files.
-#    DevIL_FOUND    - this is set to TRUE if all the above variables were set.
-#                     This will be set to false if ILU or ILUT are not found,
-#                     even if they are not needed. In most systems, if one
-#                     library is found all the others are as well. That's the
-#                     way the DevIL developers release it.
+#[=======================================================================[.rst:
+FindDevIL
+---------
+
+
+
+This module locates the developer's image library.
+http://openil.sourceforge.net/
+
+This module sets:
+
+::
+
+   IL_LIBRARIES -   the name of the IL library. These include the full path to
+                    the core DevIL library. This one has to be linked into the
+                    application.
+   ILU_LIBRARIES -  the name of the ILU library. Again, the full path. This
+                    library is for filters and effects, not actual loading. It
+                    doesn't have to be linked if the functionality it provides
+                    is not used.
+   ILUT_LIBRARIES - the name of the ILUT library. Full path. This part of the
+                    library interfaces with OpenGL. It is not strictly needed
+                    in applications.
+   IL_INCLUDE_DIR - where to find the il.h, ilu.h and ilut.h files.
+   DevIL_FOUND    - this is set to TRUE if all the above variables were set.
+                    This will be set to false if ILU or ILUT are not found,
+                    even if they are not needed. In most systems, if one
+                    library is found all the others are as well. That's the
+                    way the DevIL developers release it.
+#]=======================================================================]
 
 # TODO: Add version support.
 # Tested under Linux and Windows (MSVC)
diff --git a/Modules/FindEXPAT.cmake b/Modules/FindEXPAT.cmake
index 39086e4..58e0841 100644
--- a/Modules/FindEXPAT.cmake
+++ b/Modules/FindEXPAT.cmake
@@ -1,32 +1,33 @@
 # Distributed under the OSI-approved BSD 3-Clause License.  See accompanying
 # file Copyright.txt or https://cmake.org/licensing for details.
 
-#.rst:
-# FindEXPAT
-# ---------
-#
-# Find the native Expat headers and library.
-#
-# Imported Targets
-# ^^^^^^^^^^^^^^^^
-#
-# This module defines the following :prop_tgt:`IMPORTED` targets:
-#
-# ``EXPAT::EXPAT``
-#   The Expat ``expat`` library, if found.
-#
-# Result Variables
-# ^^^^^^^^^^^^^^^^
-#
-# This module will set the following variables in your project:
-#
-# ``EXPAT_INCLUDE_DIRS``
-#   where to find expat.h, etc.
-# ``EXPAT_LIBRARIES``
-#   the libraries to link against to use Expat.
-# ``EXPAT_FOUND``
-#   true if the Expat headers and libraries were found.
-#
+#[=======================================================================[.rst:
+FindEXPAT
+---------
+
+Find the native Expat headers and library.
+
+Imported Targets
+^^^^^^^^^^^^^^^^
+
+This module defines the following :prop_tgt:`IMPORTED` targets:
+
+``EXPAT::EXPAT``
+  The Expat ``expat`` library, if found.
+
+Result Variables
+^^^^^^^^^^^^^^^^
+
+This module will set the following variables in your project:
+
+``EXPAT_INCLUDE_DIRS``
+  where to find expat.h, etc.
+``EXPAT_LIBRARIES``
+  the libraries to link against to use Expat.
+``EXPAT_FOUND``
+  true if the Expat headers and libraries were found.
+
+#]=======================================================================]
 
 find_package(PkgConfig QUIET)
 
diff --git a/Modules/FindFLEX.cmake b/Modules/FindFLEX.cmake
index 3945b78..edebe75 100644
--- a/Modules/FindFLEX.cmake
+++ b/Modules/FindFLEX.cmake
@@ -1,100 +1,101 @@
 # Distributed under the OSI-approved BSD 3-Clause License.  See accompanying
 # file Copyright.txt or https://cmake.org/licensing for details.
 
-#.rst:
-# FindFLEX
-# --------
-#
-# Find flex executable and provides a macro to generate custom build rules
-#
-#
-#
-# The module defines the following variables:
-#
-# ::
-#
-#   FLEX_FOUND - true is flex executable is found
-#   FLEX_EXECUTABLE - the path to the flex executable
-#   FLEX_VERSION - the version of flex
-#   FLEX_LIBRARIES - The flex libraries
-#   FLEX_INCLUDE_DIRS - The path to the flex headers
-#
-#
-#
-# The minimum required version of flex can be specified using the
-# standard syntax, e.g.  find_package(FLEX 2.5.13)
-#
-#
-#
-# If flex is found on the system, the module provides the macro:
-#
-# ::
-#
-#   FLEX_TARGET(Name FlexInput FlexOutput
-#               [COMPILE_FLAGS <string>]
-#               [DEFINES_FILE <string>]
-#               )
-#
-# which creates a custom command to generate the <FlexOutput> file from
-# the <FlexInput> file.  If COMPILE_FLAGS option is specified, the next
-# parameter is added to the flex command line. If flex is configured to
-# output a header file, the DEFINES_FILE option may be used to specify its
-# name. Name is an alias used to get details of this custom command.
-# Indeed the macro defines the following variables:
-#
-# ::
-#
-#   FLEX_${Name}_DEFINED - true is the macro ran successfully
-#   FLEX_${Name}_OUTPUTS - the source file generated by the custom rule, an
-#   alias for FlexOutput
-#   FLEX_${Name}_INPUT - the flex source file, an alias for ${FlexInput}
-#   FLEX_${Name}_OUTPUT_HEADER - the header flex output, if any.
-#
-#
-#
-# Flex scanners often use tokens defined by Bison: the code generated
-# by Flex depends of the header generated by Bison.  This module also
-# defines a macro:
-#
-# ::
-#
-#   ADD_FLEX_BISON_DEPENDENCY(FlexTarget BisonTarget)
-#
-# which adds the required dependency between a scanner and a parser
-# where <FlexTarget> and <BisonTarget> are the first parameters of
-# respectively FLEX_TARGET and BISON_TARGET macros.
-#
-# ::
-#
-#   ====================================================================
-#   Example:
-#
-#
-#
-# ::
-#
-#    find_package(BISON)
-#    find_package(FLEX)
-#
-#
-#
-# ::
-#
-#    BISON_TARGET(MyParser parser.y ${CMAKE_CURRENT_BINARY_DIR}/parser.cpp)
-#    FLEX_TARGET(MyScanner lexer.l  ${CMAKE_CURRENT_BINARY_DIR}/lexer.cpp)
-#    ADD_FLEX_BISON_DEPENDENCY(MyScanner MyParser)
-#
-#
-#
-# ::
-#
-#    include_directories(${CMAKE_CURRENT_BINARY_DIR})
-#    add_executable(Foo
-#       Foo.cc
-#       ${BISON_MyParser_OUTPUTS}
-#       ${FLEX_MyScanner_OUTPUTS}
-#    )
-#   ====================================================================
+#[=======================================================================[.rst:
+FindFLEX
+--------
+
+Find flex executable and provides a macro to generate custom build rules
+
+
+
+The module defines the following variables:
+
+::
+
+  FLEX_FOUND - true is flex executable is found
+  FLEX_EXECUTABLE - the path to the flex executable
+  FLEX_VERSION - the version of flex
+  FLEX_LIBRARIES - The flex libraries
+  FLEX_INCLUDE_DIRS - The path to the flex headers
+
+
+
+The minimum required version of flex can be specified using the
+standard syntax, e.g.  find_package(FLEX 2.5.13)
+
+
+
+If flex is found on the system, the module provides the macro:
+
+::
+
+  FLEX_TARGET(Name FlexInput FlexOutput
+              [COMPILE_FLAGS <string>]
+              [DEFINES_FILE <string>]
+              )
+
+which creates a custom command to generate the <FlexOutput> file from
+the <FlexInput> file.  If COMPILE_FLAGS option is specified, the next
+parameter is added to the flex command line. If flex is configured to
+output a header file, the DEFINES_FILE option may be used to specify its
+name. Name is an alias used to get details of this custom command.
+Indeed the macro defines the following variables:
+
+::
+
+  FLEX_${Name}_DEFINED - true is the macro ran successfully
+  FLEX_${Name}_OUTPUTS - the source file generated by the custom rule, an
+  alias for FlexOutput
+  FLEX_${Name}_INPUT - the flex source file, an alias for ${FlexInput}
+  FLEX_${Name}_OUTPUT_HEADER - the header flex output, if any.
+
+
+
+Flex scanners often use tokens defined by Bison: the code generated
+by Flex depends of the header generated by Bison.  This module also
+defines a macro:
+
+::
+
+  ADD_FLEX_BISON_DEPENDENCY(FlexTarget BisonTarget)
+
+which adds the required dependency between a scanner and a parser
+where <FlexTarget> and <BisonTarget> are the first parameters of
+respectively FLEX_TARGET and BISON_TARGET macros.
+
+::
+
+  ====================================================================
+  Example:
+
+
+
+::
+
+   find_package(BISON)
+   find_package(FLEX)
+
+
+
+::
+
+   BISON_TARGET(MyParser parser.y ${CMAKE_CURRENT_BINARY_DIR}/parser.cpp)
+   FLEX_TARGET(MyScanner lexer.l  ${CMAKE_CURRENT_BINARY_DIR}/lexer.cpp)
+   ADD_FLEX_BISON_DEPENDENCY(MyScanner MyParser)
+
+
+
+::
+
+   include_directories(${CMAKE_CURRENT_BINARY_DIR})
+   add_executable(Foo
+      Foo.cc
+      ${BISON_MyParser_OUTPUTS}
+      ${FLEX_MyScanner_OUTPUTS}
+   )
+  ====================================================================
+#]=======================================================================]
 
 find_program(FLEX_EXECUTABLE NAMES flex win_flex DOC "path to the flex executable")
 mark_as_advanced(FLEX_EXECUTABLE)
diff --git a/Modules/FindFLTK.cmake b/Modules/FindFLTK.cmake
index 82c63ef..89122c0 100644
--- a/Modules/FindFLTK.cmake
+++ b/Modules/FindFLTK.cmake
@@ -1,82 +1,83 @@
 # Distributed under the OSI-approved BSD 3-Clause License.  See accompanying
 # file Copyright.txt or https://cmake.org/licensing for details.
 
-#.rst:
-# FindFLTK
-# --------
-#
-# Find the FLTK library
-#
-# Input Variables
-# ^^^^^^^^^^^^^^^
-#
-# By default this module will search for all of the FLTK components and
-# add them to the FLTK_LIBRARIES variable.  You can limit the components
-# which get placed in FLTK_LIBRARIES by defining one or more of the
-# following three options:
-#
-# ``FLTK_SKIP_OPENGL``
-#   Set to true to disable searching for the FLTK GL library
-#
-# ``FLTK_SKIP_FORMS``
-#   Set to true to disable searching for the FLTK Forms library
-#
-# ``FLTK_SKIP_IMAGES``
-#   Set to true to disable searching for the FLTK Images library
-#
-# FLTK is composed also by a binary tool. You can set the following option:
-#
-# ``FLTK_SKIP_FLUID``
-#   Set to true to not look for the FLUID binary
-#
-# Result Variables
-# ^^^^^^^^^^^^^^^^
-#
-# The following variables will be defined:
-#
-# ``FLTK_FOUND``
-#   True if all components not skipped were found
-#
-# ``FLTK_INCLUDE_DIR``
-#   Path to the include directory for FLTK header files
-#
-# ``FLTK_LIBRARIES``
-#   List of the FLTK libraries found
-#
-# ``FLTK_FLUID_EXECUTABLE``
-#   Path to the FLUID binary tool
-#
-# ``FLTK_WRAP_UI``
-#   True if FLUID is found, used to enable the FLTK_WRAP_UI command
-#
-# Cache Variables
-# ^^^^^^^^^^^^^^^
-#
-# The following cache variables are also available to set or use:
-#
-# ``FLTK_BASE_LIBRARY_RELEASE``
-#   The FLTK base library (optimized)
-#
-# ``FLTK_BASE_LIBRARY_DEBUG``
-#   The FLTK base library (debug)
-#
-# ``FLTK_GL_LIBRARY_RELEASE``
-#   The FLTK GL library (optimized)
-#
-# ``FLTK_GL_LIBRARY_DEBUG``
-#   The FLTK GL library (debug)
-#
-# ``FLTK_FORMS_LIBRARY_RELEASE``
-#   The FLTK Forms library (optimized)
-#
-# ``FLTK_FORMS_LIBRARY_DEBUG``
-#   The FLTK Forms library (debug)
-#
-# ``FLTK_IMAGES_LIBRARY_RELEASE``
-#   The FLTK Images protobuf library (optimized)
-#
-# ``FLTK_IMAGES_LIBRARY_DEBUG``
-#   The FLTK Images library (debug)
+#[=======================================================================[.rst:
+FindFLTK
+--------
+
+Find the FLTK library
+
+Input Variables
+^^^^^^^^^^^^^^^
+
+By default this module will search for all of the FLTK components and
+add them to the FLTK_LIBRARIES variable.  You can limit the components
+which get placed in FLTK_LIBRARIES by defining one or more of the
+following three options:
+
+``FLTK_SKIP_OPENGL``
+  Set to true to disable searching for the FLTK GL library
+
+``FLTK_SKIP_FORMS``
+  Set to true to disable searching for the FLTK Forms library
+
+``FLTK_SKIP_IMAGES``
+  Set to true to disable searching for the FLTK Images library
+
+FLTK is composed also by a binary tool. You can set the following option:
+
+``FLTK_SKIP_FLUID``
+  Set to true to not look for the FLUID binary
+
+Result Variables
+^^^^^^^^^^^^^^^^
+
+The following variables will be defined:
+
+``FLTK_FOUND``
+  True if all components not skipped were found
+
+``FLTK_INCLUDE_DIR``
+  Path to the include directory for FLTK header files
+
+``FLTK_LIBRARIES``
+  List of the FLTK libraries found
+
+``FLTK_FLUID_EXECUTABLE``
+  Path to the FLUID binary tool
+
+``FLTK_WRAP_UI``
+  True if FLUID is found, used to enable the FLTK_WRAP_UI command
+
+Cache Variables
+^^^^^^^^^^^^^^^
+
+The following cache variables are also available to set or use:
+
+``FLTK_BASE_LIBRARY_RELEASE``
+  The FLTK base library (optimized)
+
+``FLTK_BASE_LIBRARY_DEBUG``
+  The FLTK base library (debug)
+
+``FLTK_GL_LIBRARY_RELEASE``
+  The FLTK GL library (optimized)
+
+``FLTK_GL_LIBRARY_DEBUG``
+  The FLTK GL library (debug)
+
+``FLTK_FORMS_LIBRARY_RELEASE``
+  The FLTK Forms library (optimized)
+
+``FLTK_FORMS_LIBRARY_DEBUG``
+  The FLTK Forms library (debug)
+
+``FLTK_IMAGES_LIBRARY_RELEASE``
+  The FLTK Images protobuf library (optimized)
+
+``FLTK_IMAGES_LIBRARY_DEBUG``
+  The FLTK Images library (debug)
+#]=======================================================================]
 
 if(NOT FLTK_SKIP_OPENGL)
   find_package(OpenGL)
diff --git a/Modules/FindFLTK2.cmake b/Modules/FindFLTK2.cmake
index 365a82a..161d15c 100644
--- a/Modules/FindFLTK2.cmake
+++ b/Modules/FindFLTK2.cmake
@@ -1,29 +1,30 @@
 # Distributed under the OSI-approved BSD 3-Clause License.  See accompanying
 # file Copyright.txt or https://cmake.org/licensing for details.
 
-#.rst:
-# FindFLTK2
-# ---------
-#
-# Find the native FLTK2 includes and library
-#
-# The following settings are defined
-#
-# ::
-#
-#   FLTK2_FLUID_EXECUTABLE, where to find the Fluid tool
-#   FLTK2_WRAP_UI, This enables the FLTK2_WRAP_UI command
-#   FLTK2_INCLUDE_DIR, where to find include files
-#   FLTK2_LIBRARIES, list of fltk2 libraries
-#   FLTK2_FOUND, Don't use FLTK2 if false.
-#
-# The following settings should not be used in general.
-#
-# ::
-#
-#   FLTK2_BASE_LIBRARY   = the full path to fltk2.lib
-#   FLTK2_GL_LIBRARY     = the full path to fltk2_gl.lib
-#   FLTK2_IMAGES_LIBRARY = the full path to fltk2_images.lib
+#[=======================================================================[.rst:
+FindFLTK2
+---------
+
+Find the native FLTK2 includes and library
+
+The following settings are defined
+
+::
+
+  FLTK2_FLUID_EXECUTABLE, where to find the Fluid tool
+  FLTK2_WRAP_UI, This enables the FLTK2_WRAP_UI command
+  FLTK2_INCLUDE_DIR, where to find include files
+  FLTK2_LIBRARIES, list of fltk2 libraries
+  FLTK2_FOUND, Don't use FLTK2 if false.
+
+The following settings should not be used in general.
+
+::
+
+  FLTK2_BASE_LIBRARY   = the full path to fltk2.lib
+  FLTK2_GL_LIBRARY     = the full path to fltk2_gl.lib
+  FLTK2_IMAGES_LIBRARY = the full path to fltk2_images.lib
+#]=======================================================================]
 
 set (FLTK2_DIR $ENV{FLTK2_DIR} )
 
diff --git a/Modules/FindFreetype.cmake b/Modules/FindFreetype.cmake
index 61643be..3e6a177 100644
--- a/Modules/FindFreetype.cmake
+++ b/Modules/FindFreetype.cmake
@@ -1,45 +1,46 @@
 # Distributed under the OSI-approved BSD 3-Clause License.  See accompanying
 # file Copyright.txt or https://cmake.org/licensing for details.
 
-#.rst:
-# FindFreetype
-# ------------
-#
-# Find the FreeType font renderer includes and library.
-#
-# Imported Targets
-# ^^^^^^^^^^^^^^^^
-#
-# This module defines the following :prop_tgt:`IMPORTED` target:
-#
-# ``Freetype::Freetype``
-#   The Freetype ``freetype`` library, if found
-#
-# Result Variables
-# ^^^^^^^^^^^^^^^^
-#
-# This module will set the following variables in your project:
-#
-# ``FREETYPE_FOUND``
-#   true if the Freetype headers and libraries were found
-# ``FREETYPE_INCLUDE_DIRS``
-#   directories containing the Freetype headers. This is the
-#   concatenation of the variables:
-#
-#   ``FREETYPE_INCLUDE_DIR_ft2build``
-#     directory holding the main Freetype API configuration header
-#   ``FREETYPE_INCLUDE_DIR_freetype2``
-#     directory holding Freetype public headers
-# ``FREETYPE_LIBRARIES``
-#   the library to link against
-# ``FREETYPE_VERSION_STRING``
-#   the version of freetype found (since CMake 2.8.8)
-#
-# Hints
-# ^^^^^
-#
-# The user may set the environment variable ``FREETYPE_DIR`` to the root
-# directory of a Freetype installation.
+#[=======================================================================[.rst:
+FindFreetype
+------------
+
+Find the FreeType font renderer includes and library.
+
+Imported Targets
+^^^^^^^^^^^^^^^^
+
+This module defines the following :prop_tgt:`IMPORTED` target:
+
+``Freetype::Freetype``
+  The Freetype ``freetype`` library, if found
+
+Result Variables
+^^^^^^^^^^^^^^^^
+
+This module will set the following variables in your project:
+
+``FREETYPE_FOUND``
+  true if the Freetype headers and libraries were found
+``FREETYPE_INCLUDE_DIRS``
+  directories containing the Freetype headers. This is the
+  concatenation of the variables:
+
+  ``FREETYPE_INCLUDE_DIR_ft2build``
+    directory holding the main Freetype API configuration header
+  ``FREETYPE_INCLUDE_DIR_freetype2``
+    directory holding Freetype public headers
+``FREETYPE_LIBRARIES``
+  the library to link against
+``FREETYPE_VERSION_STRING``
+  the version of freetype found (since CMake 2.8.8)
+
+Hints
+^^^^^
+
+The user may set the environment variable ``FREETYPE_DIR`` to the root
+directory of a Freetype installation.
+#]=======================================================================]
 
 # Created by Eric Wing.
 # Modifications by Alexander Neundorf.
diff --git a/Modules/FindGCCXML.cmake b/Modules/FindGCCXML.cmake
index 1f8d738..e6c7f24 100644
--- a/Modules/FindGCCXML.cmake
+++ b/Modules/FindGCCXML.cmake
@@ -1,19 +1,20 @@
 # Distributed under the OSI-approved BSD 3-Clause License.  See accompanying
 # file Copyright.txt or https://cmake.org/licensing for details.
 
-#.rst:
-# FindGCCXML
-# ----------
-#
-# Find the GCC-XML front-end executable.
-#
-#
-#
-# This module will define the following variables:
-#
-# ::
-#
-#   GCCXML - the GCC-XML front-end executable.
+#[=======================================================================[.rst:
+FindGCCXML
+----------
+
+Find the GCC-XML front-end executable.
+
+
+
+This module will define the following variables:
+
+::
+
+  GCCXML - the GCC-XML front-end executable.
+#]=======================================================================]
 
 find_program(GCCXML
   NAMES gccxml
diff --git a/Modules/FindGDAL.cmake b/Modules/FindGDAL.cmake
index ff2976e..030553f 100644
--- a/Modules/FindGDAL.cmake
+++ b/Modules/FindGDAL.cmake
@@ -1,29 +1,30 @@
 # Distributed under the OSI-approved BSD 3-Clause License.  See accompanying
 # file Copyright.txt or https://cmake.org/licensing for details.
 
-#.rst:
-# FindGDAL
-# --------
-#
-#
-#
-# Locate gdal
-#
-# This module accepts the following environment variables:
-#
-# ::
-#
-#     GDAL_DIR or GDAL_ROOT - Specify the location of GDAL
-#
-#
-#
-# This module defines the following CMake variables:
-#
-# ::
-#
-#     GDAL_FOUND - True if libgdal is found
-#     GDAL_LIBRARY - A variable pointing to the GDAL library
-#     GDAL_INCLUDE_DIR - Where to find the headers
+#[=======================================================================[.rst:
+FindGDAL
+--------
+
+
+
+Locate gdal
+
+This module accepts the following environment variables:
+
+::
+
+    GDAL_DIR or GDAL_ROOT - Specify the location of GDAL
+
+
+
+This module defines the following CMake variables:
+
+::
+
+    GDAL_FOUND - True if libgdal is found
+    GDAL_LIBRARY - A variable pointing to the GDAL library
+    GDAL_INCLUDE_DIR - Where to find the headers
+#]=======================================================================]
 
 #
 # $GDALDIR is an environment variable that would
diff --git a/Modules/FindGIF.cmake b/Modules/FindGIF.cmake
index efc3973..9a995af 100644
--- a/Modules/FindGIF.cmake
+++ b/Modules/FindGIF.cmake
@@ -1,28 +1,29 @@
 # Distributed under the OSI-approved BSD 3-Clause License.  See accompanying
 # file Copyright.txt or https://cmake.org/licensing for details.
 
-#.rst:
-# FindGIF
-# -------
-#
-# This finds the GIF library (giflib)
-#
-# The module defines the following variables:
-#
-# ``GIF_FOUND``
-#   True if giflib was found
-# ``GIF_LIBRARIES``
-#   Libraries to link to in order to use giflib
-# ``GIF_INCLUDE_DIR``
-#   where to find the headers
-# ``GIF_VERSION``
-#   3, 4 or a full version string (eg 5.1.4) for versions >= 4.1.6
-#
-# The minimum required version of giflib can be specified using the
-# standard syntax, e.g.  find_package(GIF 4)
-#
-# $GIF_DIR is an environment variable that would correspond to the
-# ./configure --prefix=$GIF_DIR
+#[=======================================================================[.rst:
+FindGIF
+-------
+
+This finds the GIF library (giflib)
+
+The module defines the following variables:
+
+``GIF_FOUND``
+  True if giflib was found
+``GIF_LIBRARIES``
+  Libraries to link to in order to use giflib
+``GIF_INCLUDE_DIR``
+  where to find the headers
+``GIF_VERSION``
+  3, 4 or a full version string (eg 5.1.4) for versions >= 4.1.6
+
+The minimum required version of giflib can be specified using the
+standard syntax, e.g.  find_package(GIF 4)
+
+$GIF_DIR is an environment variable that would correspond to the
+./configure --prefix=$GIF_DIR
+#]=======================================================================]
 
 # Created by Eric Wing.
 # Modifications by Alexander Neundorf, Ben Campbell
diff --git a/Modules/FindGLEW.cmake b/Modules/FindGLEW.cmake
index 11e8724..ad8a810 100644
--- a/Modules/FindGLEW.cmake
+++ b/Modules/FindGLEW.cmake
@@ -1,28 +1,29 @@
 # Distributed under the OSI-approved BSD 3-Clause License.  See accompanying
 # file Copyright.txt or https://cmake.org/licensing for details.
 
-#.rst:
-# FindGLEW
-# --------
-#
-# Find the OpenGL Extension Wrangler Library (GLEW)
-#
-# IMPORTED Targets
-# ^^^^^^^^^^^^^^^^
-#
-# This module defines the :prop_tgt:`IMPORTED` target ``GLEW::GLEW``,
-# if GLEW has been found.
-#
-# Result Variables
-# ^^^^^^^^^^^^^^^^
-#
-# This module defines the following variables:
-#
-# ::
-#
-#   GLEW_INCLUDE_DIRS - include directories for GLEW
-#   GLEW_LIBRARIES - libraries to link against GLEW
-#   GLEW_FOUND - true if GLEW has been found and can be used
+#[=======================================================================[.rst:
+FindGLEW
+--------
+
+Find the OpenGL Extension Wrangler Library (GLEW)
+
+IMPORTED Targets
+^^^^^^^^^^^^^^^^
+
+This module defines the :prop_tgt:`IMPORTED` target ``GLEW::GLEW``,
+if GLEW has been found.
+
+Result Variables
+^^^^^^^^^^^^^^^^
+
+This module defines the following variables:
+
+::
+
+  GLEW_INCLUDE_DIRS - include directories for GLEW
+  GLEW_LIBRARIES - libraries to link against GLEW
+  GLEW_FOUND - true if GLEW has been found and can be used
+#]=======================================================================]
 
 find_path(GLEW_INCLUDE_DIR GL/glew.h)
 
diff --git a/Modules/FindGLUT.cmake b/Modules/FindGLUT.cmake
index 1779683..d42db53 100644
--- a/Modules/FindGLUT.cmake
+++ b/Modules/FindGLUT.cmake
@@ -1,38 +1,39 @@
 # Distributed under the OSI-approved BSD 3-Clause License.  See accompanying
 # file Copyright.txt or https://cmake.org/licensing for details.
 
-#.rst:
-# FindGLUT
-# --------
-#
-# try to find glut library and include files.
-#
-# IMPORTED Targets
-# ^^^^^^^^^^^^^^^^
-#
-# This module defines the :prop_tgt:`IMPORTED` targets:
-#
-# ``GLUT::GLUT``
-#  Defined if the system has GLUT.
-#
-# Result Variables
-# ^^^^^^^^^^^^^^^^
-#
-# This module sets the following variables:
-#
-# ::
-#
-#   GLUT_INCLUDE_DIR, where to find GL/glut.h, etc.
-#   GLUT_LIBRARIES, the libraries to link against
-#   GLUT_FOUND, If false, do not try to use GLUT.
-#
-# Also defined, but not for general use are:
-#
-# ::
-#
-#   GLUT_glut_LIBRARY = the full path to the glut library.
-#   GLUT_Xmu_LIBRARY  = the full path to the Xmu library.
-#   GLUT_Xi_LIBRARY   = the full path to the Xi Library.
+#[=======================================================================[.rst:
+FindGLUT
+--------
+
+try to find glut library and include files.
+
+IMPORTED Targets
+^^^^^^^^^^^^^^^^
+
+This module defines the :prop_tgt:`IMPORTED` targets:
+
+``GLUT::GLUT``
+ Defined if the system has GLUT.
+
+Result Variables
+^^^^^^^^^^^^^^^^
+
+This module sets the following variables:
+
+::
+
+  GLUT_INCLUDE_DIR, where to find GL/glut.h, etc.
+  GLUT_LIBRARIES, the libraries to link against
+  GLUT_FOUND, If false, do not try to use GLUT.
+
+Also defined, but not for general use are:
+
+::
+
+  GLUT_glut_LIBRARY = the full path to the glut library.
+  GLUT_Xmu_LIBRARY  = the full path to the Xmu library.
+  GLUT_Xi_LIBRARY   = the full path to the Xi Library.
+#]=======================================================================]
 
 include(${CMAKE_CURRENT_LIST_DIR}/SelectLibraryConfigurations.cmake)
 
diff --git a/Modules/FindGSL.cmake b/Modules/FindGSL.cmake
index 8d10b6c..db05121 100644
--- a/Modules/FindGSL.cmake
+++ b/Modules/FindGSL.cmake
@@ -1,60 +1,61 @@
 # Distributed under the OSI-approved BSD 3-Clause License.  See accompanying
 # file Copyright.txt or https://cmake.org/licensing for details.
 
-#.rst:
-# FindGSL
-# --------
-#
-# Find the native GSL includes and libraries.
-#
-# The GNU Scientific Library (GSL) is a numerical library for C and C++
-# programmers. It is free software under the GNU General Public
-# License.
-#
-# Imported Targets
-# ^^^^^^^^^^^^^^^^
-#
-# If GSL is found, this module defines the following :prop_tgt:`IMPORTED`
-# targets::
-#
-#  GSL::gsl      - The main GSL library.
-#  GSL::gslcblas - The CBLAS support library used by GSL.
-#
-# Result Variables
-# ^^^^^^^^^^^^^^^^
-#
-# This module will set the following variables in your project::
-#
-#  GSL_FOUND          - True if GSL found on the local system
-#  GSL_INCLUDE_DIRS   - Location of GSL header files.
-#  GSL_LIBRARIES      - The GSL libraries.
-#  GSL_VERSION        - The version of the discovered GSL install.
-#
-# Hints
-# ^^^^^
-#
-# Set ``GSL_ROOT_DIR`` to a directory that contains a GSL installation.
-#
-# This script expects to find libraries at ``$GSL_ROOT_DIR/lib`` and the GSL
-# headers at ``$GSL_ROOT_DIR/include/gsl``.  The library directory may
-# optionally provide Release and Debug folders. If available, the libraries
-# named ``gsld``, ``gslblasd`` or ``cblasd`` are recognized as debug libraries.
-# For Unix-like systems, this script will use ``$GSL_ROOT_DIR/bin/gsl-config``
-# (if found) to aid in the discovery of GSL.
-#
-# Cache Variables
-# ^^^^^^^^^^^^^^^
-#
-# This module may set the following variables depending on platform and type
-# of GSL installation discovered.  These variables may optionally be set to
-# help this module find the correct files::
-#
-#  GSL_CBLAS_LIBRARY       - Location of the GSL CBLAS library.
-#  GSL_CBLAS_LIBRARY_DEBUG - Location of the debug GSL CBLAS library (if any).
-#  GSL_CONFIG_EXECUTABLE   - Location of the ``gsl-config`` script (if any).
-#  GSL_LIBRARY             - Location of the GSL library.
-#  GSL_LIBRARY_DEBUG       - Location of the debug GSL library (if any).
-#
+#[=======================================================================[.rst:
+FindGSL
+--------
+
+Find the native GSL includes and libraries.
+
+The GNU Scientific Library (GSL) is a numerical library for C and C++
+programmers. It is free software under the GNU General Public
+License.
+
+Imported Targets
+^^^^^^^^^^^^^^^^
+
+If GSL is found, this module defines the following :prop_tgt:`IMPORTED`
+targets::
+
+ GSL::gsl      - The main GSL library.
+ GSL::gslcblas - The CBLAS support library used by GSL.
+
+Result Variables
+^^^^^^^^^^^^^^^^
+
+This module will set the following variables in your project::
+
+ GSL_FOUND          - True if GSL found on the local system
+ GSL_INCLUDE_DIRS   - Location of GSL header files.
+ GSL_LIBRARIES      - The GSL libraries.
+ GSL_VERSION        - The version of the discovered GSL install.
+
+Hints
+^^^^^
+
+Set ``GSL_ROOT_DIR`` to a directory that contains a GSL installation.
+
+This script expects to find libraries at ``$GSL_ROOT_DIR/lib`` and the GSL
+headers at ``$GSL_ROOT_DIR/include/gsl``.  The library directory may
+optionally provide Release and Debug folders. If available, the libraries
+named ``gsld``, ``gslblasd`` or ``cblasd`` are recognized as debug libraries.
+For Unix-like systems, this script will use ``$GSL_ROOT_DIR/bin/gsl-config``
+(if found) to aid in the discovery of GSL.
+
+Cache Variables
+^^^^^^^^^^^^^^^
+
+This module may set the following variables depending on platform and type
+of GSL installation discovered.  These variables may optionally be set to
+help this module find the correct files::
+
+ GSL_CBLAS_LIBRARY       - Location of the GSL CBLAS library.
+ GSL_CBLAS_LIBRARY_DEBUG - Location of the debug GSL CBLAS library (if any).
+ GSL_CONFIG_EXECUTABLE   - Location of the ``gsl-config`` script (if any).
+ GSL_LIBRARY             - Location of the GSL library.
+ GSL_LIBRARY_DEBUG       - Location of the debug GSL library (if any).
+
+#]=======================================================================]
 
 include(${CMAKE_CURRENT_LIST_DIR}/FindPackageHandleStandardArgs.cmake)
 
diff --git a/Modules/FindGTK.cmake b/Modules/FindGTK.cmake
index 89fb54b..8cc6c97 100644
--- a/Modules/FindGTK.cmake
+++ b/Modules/FindGTK.cmake
@@ -1,18 +1,19 @@
 # Distributed under the OSI-approved BSD 3-Clause License.  See accompanying
 # file Copyright.txt or https://cmake.org/licensing for details.
 
-#.rst:
-# FindGTK
-# -------
-#
-# try to find GTK (and glib) and GTKGLArea
-#
-# ::
-#
-#   GTK_INCLUDE_DIR   - Directories to include to use GTK
-#   GTK_LIBRARIES     - Files to link against to use GTK
-#   GTK_FOUND         - GTK was found
-#   GTK_GL_FOUND      - GTK's GL features were found
+#[=======================================================================[.rst:
+FindGTK
+-------
+
+try to find GTK (and glib) and GTKGLArea
+
+::
+
+  GTK_INCLUDE_DIR   - Directories to include to use GTK
+  GTK_LIBRARIES     - Files to link against to use GTK
+  GTK_FOUND         - GTK was found
+  GTK_GL_FOUND      - GTK's GL features were found
+#]=======================================================================]
 
 # don't even bother under WIN32
 if(UNIX)
diff --git a/Modules/FindGTK2.cmake b/Modules/FindGTK2.cmake
index 15d1230..6c1897c 100644
--- a/Modules/FindGTK2.cmake
+++ b/Modules/FindGTK2.cmake
@@ -1,102 +1,103 @@
 # Distributed under the OSI-approved BSD 3-Clause License.  See accompanying
 # file Copyright.txt or https://cmake.org/licensing for details.
 
-#.rst:
-# FindGTK2
-# --------
-#
-# FindGTK2.cmake
-#
-# This module can find the GTK2 widget libraries and several of its
-# other optional components like gtkmm, glade, and glademm.
-#
-# NOTE: If you intend to use version checking, CMake 2.6.2 or later is
-#
-# ::
-#
-#        required.
-#
-#
-#
-# Specify one or more of the following components as you call this find
-# module.  See example below.
-#
-# ::
-#
-#    gtk
-#    gtkmm
-#    glade
-#    glademm
-#
-#
-#
-# The following variables will be defined for your use
-#
-# ::
-#
-#    GTK2_FOUND - Were all of your specified components found?
-#    GTK2_INCLUDE_DIRS - All include directories
-#    GTK2_LIBRARIES - All libraries
-#    GTK2_TARGETS - All imported targets
-#    GTK2_DEFINITIONS - Additional compiler flags
-#
-#
-#
-# ::
-#
-#    GTK2_VERSION - The version of GTK2 found (x.y.z)
-#    GTK2_MAJOR_VERSION - The major version of GTK2
-#    GTK2_MINOR_VERSION - The minor version of GTK2
-#    GTK2_PATCH_VERSION - The patch version of GTK2
-#
-#
-#
-# Optional variables you can define prior to calling this module:
-#
-# ::
-#
-#    GTK2_DEBUG - Enables verbose debugging of the module
-#    GTK2_ADDITIONAL_SUFFIXES - Allows defining additional directories to
-#                               search for include files
-#
-#
-#
-# ================= Example Usage:
-#
-# ::
-#
-#    Call find_package() once, here are some examples to pick from:
-#
-#
-#
-# ::
-#
-#    Require GTK 2.6 or later
-#        find_package(GTK2 2.6 REQUIRED gtk)
-#
-#
-#
-# ::
-#
-#    Require GTK 2.10 or later and Glade
-#        find_package(GTK2 2.10 REQUIRED gtk glade)
-#
-#
-#
-# ::
-#
-#    Search for GTK/GTKMM 2.8 or later
-#        find_package(GTK2 2.8 COMPONENTS gtk gtkmm)
-#
-#
-#
-# ::
-#
-#    if(GTK2_FOUND)
-#       include_directories(${GTK2_INCLUDE_DIRS})
-#       add_executable(mygui mygui.cc)
-#       target_link_libraries(mygui ${GTK2_LIBRARIES})
-#    endif()
+#[=======================================================================[.rst:
+FindGTK2
+--------
+
+FindGTK2.cmake
+
+This module can find the GTK2 widget libraries and several of its
+other optional components like gtkmm, glade, and glademm.
+
+NOTE: If you intend to use version checking, CMake 2.6.2 or later is
+
+::
+
+       required.
+
+
+
+Specify one or more of the following components as you call this find
+module.  See example below.
+
+::
+
+   gtk
+   gtkmm
+   glade
+   glademm
+
+
+
+The following variables will be defined for your use
+
+::
+
+   GTK2_FOUND - Were all of your specified components found?
+   GTK2_INCLUDE_DIRS - All include directories
+   GTK2_LIBRARIES - All libraries
+   GTK2_TARGETS - All imported targets
+   GTK2_DEFINITIONS - Additional compiler flags
+
+
+
+::
+
+   GTK2_VERSION - The version of GTK2 found (x.y.z)
+   GTK2_MAJOR_VERSION - The major version of GTK2
+   GTK2_MINOR_VERSION - The minor version of GTK2
+   GTK2_PATCH_VERSION - The patch version of GTK2
+
+
+
+Optional variables you can define prior to calling this module:
+
+::
+
+   GTK2_DEBUG - Enables verbose debugging of the module
+   GTK2_ADDITIONAL_SUFFIXES - Allows defining additional directories to
+                              search for include files
+
+
+
+================= Example Usage:
+
+::
+
+   Call find_package() once, here are some examples to pick from:
+
+
+
+::
+
+   Require GTK 2.6 or later
+       find_package(GTK2 2.6 REQUIRED gtk)
+
+
+
+::
+
+   Require GTK 2.10 or later and Glade
+       find_package(GTK2 2.10 REQUIRED gtk glade)
+
+
+
+::
+
+   Search for GTK/GTKMM 2.8 or later
+       find_package(GTK2 2.8 COMPONENTS gtk gtkmm)
+
+
+
+::
+
+   if(GTK2_FOUND)
+      include_directories(${GTK2_INCLUDE_DIRS})
+      add_executable(mygui mygui.cc)
+      target_link_libraries(mygui ${GTK2_LIBRARIES})
+   endif()
+#]=======================================================================]
 
 # Version 1.6 (CMake 3.0)
 #   * Create targets for each library
diff --git a/Modules/FindGTest.cmake b/Modules/FindGTest.cmake
index b0579d9..b0175fe 100644
--- a/Modules/FindGTest.cmake
+++ b/Modules/FindGTest.cmake
@@ -1,77 +1,78 @@
 # Distributed under the OSI-approved BSD 3-Clause License.  See accompanying
 # file Copyright.txt or https://cmake.org/licensing for details.
 
-#.rst:
-# FindGTest
-# ---------
-#
-# Locate the Google C++ Testing Framework.
-#
-# Imported targets
-# ^^^^^^^^^^^^^^^^
-#
-# This module defines the following :prop_tgt:`IMPORTED` targets:
-#
-# ``GTest::GTest``
-#   The Google Test ``gtest`` library, if found; adds Thread::Thread
-#   automatically
-# ``GTest::Main``
-#   The Google Test ``gtest_main`` library, if found
-#
-#
-# Result variables
-# ^^^^^^^^^^^^^^^^
-#
-# This module will set the following variables in your project:
-#
-# ``GTEST_FOUND``
-#   Found the Google Testing framework
-# ``GTEST_INCLUDE_DIRS``
-#   the directory containing the Google Test headers
-#
-# The library variables below are set as normal variables.  These
-# contain debug/optimized keywords when a debugging library is found.
-#
-# ``GTEST_LIBRARIES``
-#   The Google Test ``gtest`` library; note it also requires linking
-#   with an appropriate thread library
-# ``GTEST_MAIN_LIBRARIES``
-#   The Google Test ``gtest_main`` library
-# ``GTEST_BOTH_LIBRARIES``
-#   Both ``gtest`` and ``gtest_main``
-#
-# Cache variables
-# ^^^^^^^^^^^^^^^
-#
-# The following cache variables may also be set:
-#
-# ``GTEST_ROOT``
-#   The root directory of the Google Test installation (may also be
-#   set as an environment variable)
-# ``GTEST_MSVC_SEARCH``
-#   If compiling with MSVC, this variable can be set to ``MT`` or
-#   ``MD`` (the default) to enable searching a GTest build tree
-#
-#
-# Example usage
-# ^^^^^^^^^^^^^
-#
-# ::
-#
-#     enable_testing()
-#     find_package(GTest REQUIRED)
-#
-#     add_executable(foo foo.cc)
-#     target_link_libraries(foo GTest::GTest GTest::Main)
-#
-#     add_test(AllTestsInFoo foo)
-#
-#
-# Deeper integration with CTest
-# ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
-#
-# See :module:`GoogleTest` for information on the :command:`gtest_add_tests`
-# and :command:`gtest_discover_tests` commands.
+#[=======================================================================[.rst:
+FindGTest
+---------
+
+Locate the Google C++ Testing Framework.
+
+Imported targets
+^^^^^^^^^^^^^^^^
+
+This module defines the following :prop_tgt:`IMPORTED` targets:
+
+``GTest::GTest``
+  The Google Test ``gtest`` library, if found; adds Thread::Thread
+  automatically
+``GTest::Main``
+  The Google Test ``gtest_main`` library, if found
+
+
+Result variables
+^^^^^^^^^^^^^^^^
+
+This module will set the following variables in your project:
+
+``GTEST_FOUND``
+  Found the Google Testing framework
+``GTEST_INCLUDE_DIRS``
+  the directory containing the Google Test headers
+
+The library variables below are set as normal variables.  These
+contain debug/optimized keywords when a debugging library is found.
+
+``GTEST_LIBRARIES``
+  The Google Test ``gtest`` library; note it also requires linking
+  with an appropriate thread library
+``GTEST_MAIN_LIBRARIES``
+  The Google Test ``gtest_main`` library
+``GTEST_BOTH_LIBRARIES``
+  Both ``gtest`` and ``gtest_main``
+
+Cache variables
+^^^^^^^^^^^^^^^
+
+The following cache variables may also be set:
+
+``GTEST_ROOT``
+  The root directory of the Google Test installation (may also be
+  set as an environment variable)
+``GTEST_MSVC_SEARCH``
+  If compiling with MSVC, this variable can be set to ``MT`` or
+  ``MD`` (the default) to enable searching a GTest build tree
+
+
+Example usage
+^^^^^^^^^^^^^
+
+::
+
+    enable_testing()
+    find_package(GTest REQUIRED)
+
+    add_executable(foo foo.cc)
+    target_link_libraries(foo GTest::GTest GTest::Main)
+
+    add_test(AllTestsInFoo foo)
+
+
+Deeper integration with CTest
+^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
+
+See :module:`GoogleTest` for information on the :command:`gtest_add_tests`
+and :command:`gtest_discover_tests` commands.
+#]=======================================================================]
 
 include(${CMAKE_CURRENT_LIST_DIR}/GoogleTest.cmake)
 
diff --git a/Modules/FindGettext.cmake b/Modules/FindGettext.cmake
index 9623b85..9e29e8d 100644
--- a/Modules/FindGettext.cmake
+++ b/Modules/FindGettext.cmake
@@ -1,61 +1,62 @@
 # Distributed under the OSI-approved BSD 3-Clause License.  See accompanying
 # file Copyright.txt or https://cmake.org/licensing for details.
 
-#.rst:
-# FindGettext
-# -----------
-#
-# Find GNU gettext tools
-#
-# This module looks for the GNU gettext tools.  This module defines the
-# following values:
-#
-# ::
-#
-#   GETTEXT_MSGMERGE_EXECUTABLE: the full path to the msgmerge tool.
-#   GETTEXT_MSGFMT_EXECUTABLE: the full path to the msgfmt tool.
-#   GETTEXT_FOUND: True if gettext has been found.
-#   GETTEXT_VERSION_STRING: the version of gettext found (since CMake 2.8.8)
-#
-#
-#
-# Additionally it provides the following macros:
-#
-# GETTEXT_CREATE_TRANSLATIONS ( outputFile [ALL] file1 ...  fileN )
-#
-# ::
-#
-#     This will create a target "translations" which will convert the
-#     given input po files into the binary output mo file. If the
-#     ALL option is used, the translations will also be created when
-#     building the default target.
-#
-# GETTEXT_PROCESS_POT_FILE( <potfile> [ALL] [INSTALL_DESTINATION <destdir>]
-# LANGUAGES <lang1> <lang2> ...  )
-#
-# ::
-#
-#      Process the given pot file to mo files.
-#      If INSTALL_DESTINATION is given then automatically install rules will
-#      be created, the language subdirectory will be taken into account
-#      (by default use share/locale/).
-#      If ALL is specified, the pot file is processed when building the all traget.
-#      It creates a custom target "potfile".
-#
-# GETTEXT_PROCESS_PO_FILES( <lang> [ALL] [INSTALL_DESTINATION <dir>]
-# PO_FILES <po1> <po2> ...  )
-#
-# ::
-#
-#      Process the given po files to mo files for the given language.
-#      If INSTALL_DESTINATION is given then automatically install rules will
-#      be created, the language subdirectory will be taken into account
-#      (by default use share/locale/).
-#      If ALL is specified, the po files are processed when building the all traget.
-#      It creates a custom target "pofiles".
-#
-# .. note::
-#   If you wish to use the Gettext library (libintl), use :module:`FindIntl`.
+#[=======================================================================[.rst:
+FindGettext
+-----------
+
+Find GNU gettext tools
+
+This module looks for the GNU gettext tools.  This module defines the
+following values:
+
+::
+
+  GETTEXT_MSGMERGE_EXECUTABLE: the full path to the msgmerge tool.
+  GETTEXT_MSGFMT_EXECUTABLE: the full path to the msgfmt tool.
+  GETTEXT_FOUND: True if gettext has been found.
+  GETTEXT_VERSION_STRING: the version of gettext found (since CMake 2.8.8)
+
+
+
+Additionally it provides the following macros:
+
+GETTEXT_CREATE_TRANSLATIONS ( outputFile [ALL] file1 ...  fileN )
+
+::
+
+    This will create a target "translations" which will convert the
+    given input po files into the binary output mo file. If the
+    ALL option is used, the translations will also be created when
+    building the default target.
+
+GETTEXT_PROCESS_POT_FILE( <potfile> [ALL] [INSTALL_DESTINATION <destdir>]
+LANGUAGES <lang1> <lang2> ...  )
+
+::
+
+     Process the given pot file to mo files.
+     If INSTALL_DESTINATION is given then automatically install rules will
+     be created, the language subdirectory will be taken into account
+     (by default use share/locale/).
+     If ALL is specified, the pot file is processed when building the all traget.
+     It creates a custom target "potfile".
+
+GETTEXT_PROCESS_PO_FILES( <lang> [ALL] [INSTALL_DESTINATION <dir>]
+PO_FILES <po1> <po2> ...  )
+
+::
+
+     Process the given po files to mo files for the given language.
+     If INSTALL_DESTINATION is given then automatically install rules will
+     be created, the language subdirectory will be taken into account
+     (by default use share/locale/).
+     If ALL is specified, the po files are processed when building the all traget.
+     It creates a custom target "pofiles".
+
+.. note::
+  If you wish to use the Gettext library (libintl), use :module:`FindIntl`.
+#]=======================================================================]
 
 find_program(GETTEXT_MSGMERGE_EXECUTABLE msgmerge)
 
diff --git a/Modules/FindGit.cmake b/Modules/FindGit.cmake
index fae31eb..c447a1a 100644
--- a/Modules/FindGit.cmake
+++ b/Modules/FindGit.cmake
@@ -1,27 +1,28 @@
 # Distributed under the OSI-approved BSD 3-Clause License.  See accompanying
 # file Copyright.txt or https://cmake.org/licensing for details.
 
-#.rst:
-# FindGit
-# -------
-#
-# The module defines the following variables:
-#
-# ``GIT_EXECUTABLE``
-#   Path to Git command-line client.
-# ``Git_FOUND``, ``GIT_FOUND``
-#   True if the Git command-line client was found.
-# ``GIT_VERSION_STRING``
-#   The version of Git found.
-#
-# Example usage:
-#
-# .. code-block:: cmake
-#
-#    find_package(Git)
-#    if(Git_FOUND)
-#      message("Git found: ${GIT_EXECUTABLE}")
-#    endif()
+#[=======================================================================[.rst:
+FindGit
+-------
+
+The module defines the following variables:
+
+``GIT_EXECUTABLE``
+  Path to Git command-line client.
+``Git_FOUND``, ``GIT_FOUND``
+  True if the Git command-line client was found.
+``GIT_VERSION_STRING``
+  The version of Git found.
+
+Example usage:
+
+.. code-block:: cmake
+
+   find_package(Git)
+   if(Git_FOUND)
+     message("Git found: ${GIT_EXECUTABLE}")
+   endif()
+#]=======================================================================]
 
 # Look for 'git' or 'eg' (easy git)
 #
diff --git a/Modules/FindGnuTLS.cmake b/Modules/FindGnuTLS.cmake
index 1a97d99..9c07444 100644
--- a/Modules/FindGnuTLS.cmake
+++ b/Modules/FindGnuTLS.cmake
@@ -1,22 +1,23 @@
 # Distributed under the OSI-approved BSD 3-Clause License.  See accompanying
 # file Copyright.txt or https://cmake.org/licensing for details.
 
-#.rst:
-# FindGnuTLS
-# ----------
-#
-# Try to find the GNU Transport Layer Security library (gnutls)
-#
-#
-#
-# Once done this will define
-#
-# ::
-#
-#   GNUTLS_FOUND - System has gnutls
-#   GNUTLS_INCLUDE_DIR - The gnutls include directory
-#   GNUTLS_LIBRARIES - The libraries needed to use gnutls
-#   GNUTLS_DEFINITIONS - Compiler switches required for using gnutls
+#[=======================================================================[.rst:
+FindGnuTLS
+----------
+
+Try to find the GNU Transport Layer Security library (gnutls)
+
+
+
+Once done this will define
+
+::
+
+  GNUTLS_FOUND - System has gnutls
+  GNUTLS_INCLUDE_DIR - The gnutls include directory
+  GNUTLS_LIBRARIES - The libraries needed to use gnutls
+  GNUTLS_DEFINITIONS - Compiler switches required for using gnutls
+#]=======================================================================]
 
 # Note that this doesn't try to find the gnutls-extra package.
 
diff --git a/Modules/FindGnuplot.cmake b/Modules/FindGnuplot.cmake
index aa4cd6c..ca2467d 100644
--- a/Modules/FindGnuplot.cmake
+++ b/Modules/FindGnuplot.cmake
@@ -1,25 +1,26 @@
 # Distributed under the OSI-approved BSD 3-Clause License.  See accompanying
 # file Copyright.txt or https://cmake.org/licensing for details.
 
-#.rst:
-# FindGnuplot
-# -----------
-#
-# this module looks for gnuplot
-#
-#
-#
-# Once done this will define
-#
-# ::
-#
-#   GNUPLOT_FOUND - system has Gnuplot
-#   GNUPLOT_EXECUTABLE - the Gnuplot executable
-#   GNUPLOT_VERSION_STRING - the version of Gnuplot found (since CMake 2.8.8)
-#
-#
-#
-# GNUPLOT_VERSION_STRING will not work for old versions like 3.7.1.
+#[=======================================================================[.rst:
+FindGnuplot
+-----------
+
+this module looks for gnuplot
+
+
+
+Once done this will define
+
+::
+
+  GNUPLOT_FOUND - system has Gnuplot
+  GNUPLOT_EXECUTABLE - the Gnuplot executable
+  GNUPLOT_VERSION_STRING - the version of Gnuplot found (since CMake 2.8.8)
+
+
+
+GNUPLOT_VERSION_STRING will not work for old versions like 3.7.1.
+#]=======================================================================]
 
 include(${CMAKE_CURRENT_LIST_DIR}/FindCygwin.cmake)
 
diff --git a/Modules/FindHDF5.cmake b/Modules/FindHDF5.cmake
index 41b1002..e36767a 100644
--- a/Modules/FindHDF5.cmake
+++ b/Modules/FindHDF5.cmake
@@ -1,109 +1,110 @@
 # Distributed under the OSI-approved BSD 3-Clause License.  See accompanying
 # file Copyright.txt or https://cmake.org/licensing for details.
 
-#.rst:
-# FindHDF5
-# --------
-#
-# Find HDF5, a library for reading and writing self describing array data.
-#
-#
-#
-# This module invokes the HDF5 wrapper compiler that should be installed
-# alongside HDF5.  Depending upon the HDF5 Configuration, the wrapper
-# compiler is called either h5cc or h5pcc.  If this succeeds, the module
-# will then call the compiler with the -show argument to see what flags
-# are used when compiling an HDF5 client application.
-#
-# The module will optionally accept the COMPONENTS argument.  If no
-# COMPONENTS are specified, then the find module will default to finding
-# only the HDF5 C library.  If one or more COMPONENTS are specified, the
-# module will attempt to find the language bindings for the specified
-# components.  The only valid components are C, CXX, Fortran, HL, and
-# Fortran_HL.  If the COMPONENTS argument is not given, the module will
-# attempt to find only the C bindings.
-#
-# This module will read the variable
-# HDF5_USE_STATIC_LIBRARIES to determine whether or not to prefer a
-# static link to a dynamic link for HDF5 and all of it's dependencies.
-# To use this feature, make sure that the HDF5_USE_STATIC_LIBRARIES
-# variable is set before the call to find_package.
-#
-# To provide the module with a hint about where to find your HDF5
-# installation, you can set the environment variable HDF5_ROOT.  The
-# Find module will then look in this path when searching for HDF5
-# executables, paths, and libraries.
-#
-# Both the serial and parallel HDF5 wrappers are considered and the first
-# directory to contain either one will be used.  In the event that both appear
-# in the same directory the serial version is preferentially selected. This
-# behavior can be reversed by setting the variable HDF5_PREFER_PARALLEL to
-# true.
-#
-# In addition to finding the includes and libraries required to compile
-# an HDF5 client application, this module also makes an effort to find
-# tools that come with the HDF5 distribution that may be useful for
-# regression testing.
-#
-# This module will define the following variables:
-#
-# ::
-#
-#   HDF5_FOUND - true if HDF5 was found on the system
-#   HDF5_VERSION - HDF5 version in format Major.Minor.Release
-#   HDF5_INCLUDE_DIRS - Location of the hdf5 includes
-#   HDF5_INCLUDE_DIR - Location of the hdf5 includes (deprecated)
-#   HDF5_DEFINITIONS - Required compiler definitions for HDF5
-#   HDF5_LIBRARIES - Required libraries for all requested bindings
-#   HDF5_HL_LIBRARIES - Required libraries for the HDF5 high level API for all
-#                       bindings, if the HL component is enabled
-#
-# Available components are: C CXX Fortran and HL.  For each enabled language
-# binding, a corresponding HDF5_${LANG}_LIBRARIES variable, and potentially
-# HDF5_${LANG}_DEFINITIONS, will be defined.
-# If the HL component is enabled, then an HDF5_${LANG}_HL_LIBRARIES will
-# also be defined.  With all components enabled, the following variables will be defined:
-#
-# ::
-#
-#   HDF5_C_DEFINITIONS -- Required compiler definitions for HDF5 C bindings
-#   HDF5_CXX_DEFINITIONS -- Required compiler definitions for HDF5 C++ bindings
-#   HDF5_Fortran_DEFINITIONS -- Required compiler definitions for HDF5 Fortran bindings
-#   HDF5_C_INCLUDE_DIRS -- Required include directories for HDF5 C bindings
-#   HDF5_CXX_INCLUDE_DIRS -- Required include directories for HDF5 C++ bindings
-#   HDF5_Fortran_INCLUDE_DIRS -- Required include directories for HDF5 Fortran bindings
-#   HDF5_C_LIBRARIES - Required libraries for the HDF5 C bindings
-#   HDF5_CXX_LIBRARIES - Required libraries for the HDF5 C++ bindings
-#   HDF5_Fortran_LIBRARIES - Required libraries for the HDF5 Fortran bindings
-#   HDF5_C_HL_LIBRARIES - Required libraries for the high level C bindings
-#   HDF5_CXX_HL_LIBRARIES - Required libraries for the high level C++ bindings
-#   HDF5_Fortran_HL_LIBRARIES - Required libraries for the high level Fortran
-#                               bindings.
-#
-#   HDF5_IS_PARALLEL - Whether or not HDF5 was found with parallel IO support
-#   HDF5_C_COMPILER_EXECUTABLE - the path to the HDF5 C wrapper compiler
-#   HDF5_CXX_COMPILER_EXECUTABLE - the path to the HDF5 C++ wrapper compiler
-#   HDF5_Fortran_COMPILER_EXECUTABLE - the path to the HDF5 Fortran wrapper compiler
-#   HDF5_C_COMPILER_EXECUTABLE_NO_INTERROGATE - path to the primary C compiler
-#                                               which is also the HDF5 wrapper
-#   HDF5_CXX_COMPILER_EXECUTABLE_NO_INTERROGATE - path to the primary C++
-#                                                 compiler which is also
-#                                                 the HDF5 wrapper
-#   HDF5_Fortran_COMPILER_EXECUTABLE_NO_INTERROGATE - path to the primary
-#                                                     Fortran compiler which
-#                                                     is also the HDF5 wrapper
-#   HDF5_DIFF_EXECUTABLE - the path to the HDF5 dataset comparison tool
-#
-# The following variable can be set to guide the search for HDF5 libraries and includes:
-#
-# ``HDF5_ROOT``
-#   Specify the path to the HDF5 installation to use.
-#
-# ``HDF5_FIND_DEBUG``
-#   Set to a true value to get some extra debugging output.
-#
-# ``HDF5_NO_FIND_PACKAGE_CONFIG_FILE``
-#   Set to a true value to skip trying to find ``hdf5-config.cmake``.
+#[=======================================================================[.rst:
+FindHDF5
+--------
+
+Find HDF5, a library for reading and writing self describing array data.
+
+
+
+This module invokes the HDF5 wrapper compiler that should be installed
+alongside HDF5.  Depending upon the HDF5 Configuration, the wrapper
+compiler is called either h5cc or h5pcc.  If this succeeds, the module
+will then call the compiler with the -show argument to see what flags
+are used when compiling an HDF5 client application.
+
+The module will optionally accept the COMPONENTS argument.  If no
+COMPONENTS are specified, then the find module will default to finding
+only the HDF5 C library.  If one or more COMPONENTS are specified, the
+module will attempt to find the language bindings for the specified
+components.  The only valid components are C, CXX, Fortran, HL, and
+Fortran_HL.  If the COMPONENTS argument is not given, the module will
+attempt to find only the C bindings.
+
+This module will read the variable
+HDF5_USE_STATIC_LIBRARIES to determine whether or not to prefer a
+static link to a dynamic link for HDF5 and all of it's dependencies.
+To use this feature, make sure that the HDF5_USE_STATIC_LIBRARIES
+variable is set before the call to find_package.
+
+To provide the module with a hint about where to find your HDF5
+installation, you can set the environment variable HDF5_ROOT.  The
+Find module will then look in this path when searching for HDF5
+executables, paths, and libraries.
+
+Both the serial and parallel HDF5 wrappers are considered and the first
+directory to contain either one will be used.  In the event that both appear
+in the same directory the serial version is preferentially selected. This
+behavior can be reversed by setting the variable HDF5_PREFER_PARALLEL to
+true.
+
+In addition to finding the includes and libraries required to compile
+an HDF5 client application, this module also makes an effort to find
+tools that come with the HDF5 distribution that may be useful for
+regression testing.
+
+This module will define the following variables:
+
+::
+
+  HDF5_FOUND - true if HDF5 was found on the system
+  HDF5_VERSION - HDF5 version in format Major.Minor.Release
+  HDF5_INCLUDE_DIRS - Location of the hdf5 includes
+  HDF5_INCLUDE_DIR - Location of the hdf5 includes (deprecated)
+  HDF5_DEFINITIONS - Required compiler definitions for HDF5
+  HDF5_LIBRARIES - Required libraries for all requested bindings
+  HDF5_HL_LIBRARIES - Required libraries for the HDF5 high level API for all
+                      bindings, if the HL component is enabled
+
+Available components are: C CXX Fortran and HL.  For each enabled language
+binding, a corresponding HDF5_${LANG}_LIBRARIES variable, and potentially
+HDF5_${LANG}_DEFINITIONS, will be defined.
+If the HL component is enabled, then an HDF5_${LANG}_HL_LIBRARIES will
+also be defined.  With all components enabled, the following variables will be defined:
+
+::
+
+  HDF5_C_DEFINITIONS -- Required compiler definitions for HDF5 C bindings
+  HDF5_CXX_DEFINITIONS -- Required compiler definitions for HDF5 C++ bindings
+  HDF5_Fortran_DEFINITIONS -- Required compiler definitions for HDF5 Fortran bindings
+  HDF5_C_INCLUDE_DIRS -- Required include directories for HDF5 C bindings
+  HDF5_CXX_INCLUDE_DIRS -- Required include directories for HDF5 C++ bindings
+  HDF5_Fortran_INCLUDE_DIRS -- Required include directories for HDF5 Fortran bindings
+  HDF5_C_LIBRARIES - Required libraries for the HDF5 C bindings
+  HDF5_CXX_LIBRARIES - Required libraries for the HDF5 C++ bindings
+  HDF5_Fortran_LIBRARIES - Required libraries for the HDF5 Fortran bindings
+  HDF5_C_HL_LIBRARIES - Required libraries for the high level C bindings
+  HDF5_CXX_HL_LIBRARIES - Required libraries for the high level C++ bindings
+  HDF5_Fortran_HL_LIBRARIES - Required libraries for the high level Fortran
+                              bindings.
+
+  HDF5_IS_PARALLEL - Whether or not HDF5 was found with parallel IO support
+  HDF5_C_COMPILER_EXECUTABLE - the path to the HDF5 C wrapper compiler
+  HDF5_CXX_COMPILER_EXECUTABLE - the path to the HDF5 C++ wrapper compiler
+  HDF5_Fortran_COMPILER_EXECUTABLE - the path to the HDF5 Fortran wrapper compiler
+  HDF5_C_COMPILER_EXECUTABLE_NO_INTERROGATE - path to the primary C compiler
+                                              which is also the HDF5 wrapper
+  HDF5_CXX_COMPILER_EXECUTABLE_NO_INTERROGATE - path to the primary C++
+                                                compiler which is also
+                                                the HDF5 wrapper
+  HDF5_Fortran_COMPILER_EXECUTABLE_NO_INTERROGATE - path to the primary
+                                                    Fortran compiler which
+                                                    is also the HDF5 wrapper
+  HDF5_DIFF_EXECUTABLE - the path to the HDF5 dataset comparison tool
+
+The following variable can be set to guide the search for HDF5 libraries and includes:
+
+``HDF5_ROOT``
+  Specify the path to the HDF5 installation to use.
+
+``HDF5_FIND_DEBUG``
+  Set to a true value to get some extra debugging output.
+
+``HDF5_NO_FIND_PACKAGE_CONFIG_FILE``
+  Set to a true value to skip trying to find ``hdf5-config.cmake``.
+#]=======================================================================]
 
 # This module is maintained by Will Dicharry <wdicharry@stellarscience.com>.
 
diff --git a/Modules/FindHSPELL.cmake b/Modules/FindHSPELL.cmake
index bb0e2f0..ec077a5 100644
--- a/Modules/FindHSPELL.cmake
+++ b/Modules/FindHSPELL.cmake
@@ -1,28 +1,29 @@
 # Distributed under the OSI-approved BSD 3-Clause License.  See accompanying
 # file Copyright.txt or https://cmake.org/licensing for details.
 
-#.rst:
-# FindHSPELL
-# ----------
-#
-# Try to find Hspell
-#
-# Once done this will define
-#
-# ::
-#
-#   HSPELL_FOUND - system has Hspell
-#   HSPELL_INCLUDE_DIR - the Hspell include directory
-#   HSPELL_LIBRARIES - The libraries needed to use Hspell
-#   HSPELL_DEFINITIONS - Compiler switches required for using Hspell
-#
-#
-#
-# ::
-#
-#   HSPELL_VERSION_STRING - The version of Hspell found (x.y)
-#   HSPELL_MAJOR_VERSION  - the major version of Hspell
-#   HSPELL_MINOR_VERSION  - The minor version of Hspell
+#[=======================================================================[.rst:
+FindHSPELL
+----------
+
+Try to find Hspell
+
+Once done this will define
+
+::
+
+  HSPELL_FOUND - system has Hspell
+  HSPELL_INCLUDE_DIR - the Hspell include directory
+  HSPELL_LIBRARIES - The libraries needed to use Hspell
+  HSPELL_DEFINITIONS - Compiler switches required for using Hspell
+
+
+
+::
+
+  HSPELL_VERSION_STRING - The version of Hspell found (x.y)
+  HSPELL_MAJOR_VERSION  - the major version of Hspell
+  HSPELL_MINOR_VERSION  - The minor version of Hspell
+#]=======================================================================]
 
 find_path(HSPELL_INCLUDE_DIR hspell.h)
 
diff --git a/Modules/FindHTMLHelp.cmake b/Modules/FindHTMLHelp.cmake
index 6aab8a7..a11ad4d 100644
--- a/Modules/FindHTMLHelp.cmake
+++ b/Modules/FindHTMLHelp.cmake
@@ -1,19 +1,20 @@
 # Distributed under the OSI-approved BSD 3-Clause License.  See accompanying
 # file Copyright.txt or https://cmake.org/licensing for details.
 
-#.rst:
-# FindHTMLHelp
-# ------------
-#
-# This module looks for Microsoft HTML Help Compiler
-#
-# It defines:
-#
-# ::
-#
-#    HTML_HELP_COMPILER     : full path to the Compiler (hhc.exe)
-#    HTML_HELP_INCLUDE_PATH : include path to the API (htmlhelp.h)
-#    HTML_HELP_LIBRARY      : full path to the library (htmlhelp.lib)
+#[=======================================================================[.rst:
+FindHTMLHelp
+------------
+
+This module looks for Microsoft HTML Help Compiler
+
+It defines:
+
+::
+
+   HTML_HELP_COMPILER     : full path to the Compiler (hhc.exe)
+   HTML_HELP_INCLUDE_PATH : include path to the API (htmlhelp.h)
+   HTML_HELP_LIBRARY      : full path to the library (htmlhelp.lib)
+#]=======================================================================]
 
 if(WIN32)
 
diff --git a/Modules/FindHg.cmake b/Modules/FindHg.cmake
index 8aa553e..1358363 100644
--- a/Modules/FindHg.cmake
+++ b/Modules/FindHg.cmake
@@ -1,45 +1,46 @@
 # Distributed under the OSI-approved BSD 3-Clause License.  See accompanying
 # file Copyright.txt or https://cmake.org/licensing for details.
 
-#.rst:
-# FindHg
-# ------
-#
-# Extract information from a mercurial working copy.
-#
-# The module defines the following variables:
-#
-# ::
-#
-#    HG_EXECUTABLE - path to mercurial command line client (hg)
-#    HG_FOUND - true if the command line client was found
-#    HG_VERSION_STRING - the version of mercurial found
-#
-# If the command line client executable is found the following macro is defined:
-#
-# ::
-#
-#   HG_WC_INFO(<dir> <var-prefix>)
-#
-# Hg_WC_INFO extracts information of a mercurial working copy
-# at a given location.  This macro defines the following variables:
-#
-# ::
-#
-#   <var-prefix>_WC_CHANGESET - current changeset
-#   <var-prefix>_WC_REVISION - current revision
-#
-# Example usage:
-#
-# ::
-#
-#    find_package(Hg)
-#    if(HG_FOUND)
-#      message("hg found: ${HG_EXECUTABLE}")
-#      HG_WC_INFO(${PROJECT_SOURCE_DIR} Project)
-#      message("Current revision is ${Project_WC_REVISION}")
-#      message("Current changeset is ${Project_WC_CHANGESET}")
-#    endif()
+#[=======================================================================[.rst:
+FindHg
+------
+
+Extract information from a mercurial working copy.
+
+The module defines the following variables:
+
+::
+
+   HG_EXECUTABLE - path to mercurial command line client (hg)
+   HG_FOUND - true if the command line client was found
+   HG_VERSION_STRING - the version of mercurial found
+
+If the command line client executable is found the following macro is defined:
+
+::
+
+  HG_WC_INFO(<dir> <var-prefix>)
+
+Hg_WC_INFO extracts information of a mercurial working copy
+at a given location.  This macro defines the following variables:
+
+::
+
+  <var-prefix>_WC_CHANGESET - current changeset
+  <var-prefix>_WC_REVISION - current revision
+
+Example usage:
+
+::
+
+   find_package(Hg)
+   if(HG_FOUND)
+     message("hg found: ${HG_EXECUTABLE}")
+     HG_WC_INFO(${PROJECT_SOURCE_DIR} Project)
+     message("Current revision is ${Project_WC_REVISION}")
+     message("Current changeset is ${Project_WC_CHANGESET}")
+   endif()
+#]=======================================================================]
 
 find_program(HG_EXECUTABLE
   NAMES hg
diff --git a/Modules/FindICU.cmake b/Modules/FindICU.cmake
index aa531d5..685b10f 100644
--- a/Modules/FindICU.cmake
+++ b/Modules/FindICU.cmake
@@ -1,89 +1,90 @@
 # Distributed under the OSI-approved BSD 3-Clause License.  See accompanying
 # file Copyright.txt or https://cmake.org/licensing for details.
 
-#.rst:
-# FindICU
-# -------
-#
-# Find the International Components for Unicode (ICU) libraries and
-# programs.
-#
-# This module supports multiple components.
-# Components can include any of: ``data``, ``i18n``, ``io``, ``le``,
-# ``lx``, ``test``, ``tu`` and ``uc``.
-#
-# Note that on Windows ``data`` is named ``dt`` and ``i18n`` is named
-# ``in``; any of the names may be used, and the appropriate
-# platform-specific library name will be automatically selected.
-#
-# This module reports information about the ICU installation in
-# several variables.  General variables::
-#
-#   ICU_VERSION - ICU release version
-#   ICU_FOUND - true if the main programs and libraries were found
-#   ICU_LIBRARIES - component libraries to be linked
-#   ICU_INCLUDE_DIRS - the directories containing the ICU headers
-#
-# Imported targets::
-#
-#   ICU::<C>
-#
-# Where ``<C>`` is the name of an ICU component, for example
-# ``ICU::i18n``.
-#
-# ICU programs are reported in::
-#
-#   ICU_GENCNVAL_EXECUTABLE - path to gencnval executable
-#   ICU_ICUINFO_EXECUTABLE - path to icuinfo executable
-#   ICU_GENBRK_EXECUTABLE - path to genbrk executable
-#   ICU_ICU-CONFIG_EXECUTABLE - path to icu-config executable
-#   ICU_GENRB_EXECUTABLE - path to genrb executable
-#   ICU_GENDICT_EXECUTABLE - path to gendict executable
-#   ICU_DERB_EXECUTABLE - path to derb executable
-#   ICU_PKGDATA_EXECUTABLE - path to pkgdata executable
-#   ICU_UCONV_EXECUTABLE - path to uconv executable
-#   ICU_GENCFU_EXECUTABLE - path to gencfu executable
-#   ICU_MAKECONV_EXECUTABLE - path to makeconv executable
-#   ICU_GENNORM2_EXECUTABLE - path to gennorm2 executable
-#   ICU_GENCCODE_EXECUTABLE - path to genccode executable
-#   ICU_GENSPREP_EXECUTABLE - path to gensprep executable
-#   ICU_ICUPKG_EXECUTABLE - path to icupkg executable
-#   ICU_GENCMN_EXECUTABLE - path to gencmn executable
-#
-# ICU component libraries are reported in::
-#
-#   ICU_<C>_FOUND - ON if component was found
-#   ICU_<C>_LIBRARIES - libraries for component
-#
-# ICU datafiles are reported in::
-#
-#   ICU_MAKEFILE_INC - Makefile.inc
-#   ICU_PKGDATA_INC - pkgdata.inc
-#
-# Note that ``<C>`` is the uppercased name of the component.
-#
-# This module reads hints about search results from::
-#
-#   ICU_ROOT - the root of the ICU installation
-#
-# The environment variable ``ICU_ROOT`` may also be used; the
-# ICU_ROOT variable takes precedence.
-#
-# The following cache variables may also be set::
-#
-#   ICU_<P>_EXECUTABLE - the path to executable <P>
-#   ICU_INCLUDE_DIR - the directory containing the ICU headers
-#   ICU_<C>_LIBRARY - the library for component <C>
-#
-# .. note::
-#
-#   In most cases none of the above variables will require setting,
-#   unless multiple ICU versions are available and a specific version
-#   is required.
-#
-# Other variables one may set to control this module are::
-#
-#   ICU_DEBUG - Set to ON to enable debug output from FindICU.
+#[=======================================================================[.rst:
+FindICU
+-------
+
+Find the International Components for Unicode (ICU) libraries and
+programs.
+
+This module supports multiple components.
+Components can include any of: ``data``, ``i18n``, ``io``, ``le``,
+``lx``, ``test``, ``tu`` and ``uc``.
+
+Note that on Windows ``data`` is named ``dt`` and ``i18n`` is named
+``in``; any of the names may be used, and the appropriate
+platform-specific library name will be automatically selected.
+
+This module reports information about the ICU installation in
+several variables.  General variables::
+
+  ICU_VERSION - ICU release version
+  ICU_FOUND - true if the main programs and libraries were found
+  ICU_LIBRARIES - component libraries to be linked
+  ICU_INCLUDE_DIRS - the directories containing the ICU headers
+
+Imported targets::
+
+  ICU::<C>
+
+Where ``<C>`` is the name of an ICU component, for example
+``ICU::i18n``.
+
+ICU programs are reported in::
+
+  ICU_GENCNVAL_EXECUTABLE - path to gencnval executable
+  ICU_ICUINFO_EXECUTABLE - path to icuinfo executable
+  ICU_GENBRK_EXECUTABLE - path to genbrk executable
+  ICU_ICU-CONFIG_EXECUTABLE - path to icu-config executable
+  ICU_GENRB_EXECUTABLE - path to genrb executable
+  ICU_GENDICT_EXECUTABLE - path to gendict executable
+  ICU_DERB_EXECUTABLE - path to derb executable
+  ICU_PKGDATA_EXECUTABLE - path to pkgdata executable
+  ICU_UCONV_EXECUTABLE - path to uconv executable
+  ICU_GENCFU_EXECUTABLE - path to gencfu executable
+  ICU_MAKECONV_EXECUTABLE - path to makeconv executable
+  ICU_GENNORM2_EXECUTABLE - path to gennorm2 executable
+  ICU_GENCCODE_EXECUTABLE - path to genccode executable
+  ICU_GENSPREP_EXECUTABLE - path to gensprep executable
+  ICU_ICUPKG_EXECUTABLE - path to icupkg executable
+  ICU_GENCMN_EXECUTABLE - path to gencmn executable
+
+ICU component libraries are reported in::
+
+  ICU_<C>_FOUND - ON if component was found
+  ICU_<C>_LIBRARIES - libraries for component
+
+ICU datafiles are reported in::
+
+  ICU_MAKEFILE_INC - Makefile.inc
+  ICU_PKGDATA_INC - pkgdata.inc
+
+Note that ``<C>`` is the uppercased name of the component.
+
+This module reads hints about search results from::
+
+  ICU_ROOT - the root of the ICU installation
+
+The environment variable ``ICU_ROOT`` may also be used; the
+ICU_ROOT variable takes precedence.
+
+The following cache variables may also be set::
+
+  ICU_<P>_EXECUTABLE - the path to executable <P>
+  ICU_INCLUDE_DIR - the directory containing the ICU headers
+  ICU_<C>_LIBRARY - the library for component <C>
+
+.. note::
+
+  In most cases none of the above variables will require setting,
+  unless multiple ICU versions are available and a specific version
+  is required.
+
+Other variables one may set to control this module are::
+
+  ICU_DEBUG - Set to ON to enable debug output from FindICU.
+#]=======================================================================]
 
 # Written by Roger Leigh <rleigh@codelibre.net>
 
diff --git a/Modules/FindIce.cmake b/Modules/FindIce.cmake
index df76e5a..42d3d47 100644
--- a/Modules/FindIce.cmake
+++ b/Modules/FindIce.cmake
@@ -1,146 +1,147 @@
 # Distributed under the OSI-approved BSD 3-Clause License.  See accompanying
 # file Copyright.txt or https://cmake.org/licensing for details.
 
-#.rst:
-# FindIce
-# -------
-#
-# Find the ZeroC Internet Communication Engine (ICE) programs,
-# libraries and datafiles.
-#
-# This module supports multiple components.
-# Components can include any of: ``Freeze``, ``Glacier2``, ``Ice``,
-# ``IceBox``, ``IceDB``, ``IceDiscovery``, ``IceGrid``,
-# ``IceLocatorDiscovery``, ``IcePatch``, ``IceSSL``, ``IceStorm``,
-# ``IceUtil``, ``IceXML``, or ``Slice``.
-#
-# Ice 3.7 and later also include C++11-specific components:
-# ``Glacier2++11``, ``Ice++11``, ``IceBox++11``, ``IceDiscovery++11``
-# ``IceGrid``, ``IceLocatorDiscovery++11``, ``IceSSL++11``,
-# ``IceStorm++11``
-#
-# Note that the set of supported components is Ice version-specific.
-#
-# This module reports information about the Ice installation in
-# several variables.  General variables::
-#
-#   Ice_VERSION - Ice release version
-#   Ice_FOUND - true if the main programs and libraries were found
-#   Ice_LIBRARIES - component libraries to be linked
-#   Ice_INCLUDE_DIRS - the directories containing the Ice headers
-#   Ice_SLICE_DIRS - the directories containing the Ice slice interface
-#                    definitions
-#
-# Imported targets::
-#
-#   Ice::<C>
-#
-# Where ``<C>`` is the name of an Ice component, for example
-# ``Ice::Glacier2`` or ``Ice++11``.
-#
-# Ice slice programs are reported in::
-#
-#   Ice_SLICE2CPP_EXECUTABLE - path to slice2cpp executable
-#   Ice_SLICE2CS_EXECUTABLE - path to slice2cs executable
-#   Ice_SLICE2FREEZEJ_EXECUTABLE - path to slice2freezej executable
-#   Ice_SLICE2FREEZE_EXECUTABLE - path to slice2freeze executable
-#   Ice_SLICE2HTML_EXECUTABLE - path to slice2html executable
-#   Ice_SLICE2JAVA_EXECUTABLE - path to slice2java executable
-#   Ice_SLICE2JS_EXECUTABLE - path to slice2js executable
-#   Ice_SLICE2OBJC_EXECUTABLE - path to slice2objc executable
-#   Ice_SLICE2PHP_EXECUTABLE - path to slice2php executable
-#   Ice_SLICE2PY_EXECUTABLE - path to slice2py executable
-#   Ice_SLICE2RB_EXECUTABLE - path to slice2rb executable
-#
-# Ice programs are reported in::
-#
-#   Ice_GLACIER2ROUTER_EXECUTABLE - path to glacier2router executable
-#   Ice_ICEBOX_EXECUTABLE - path to icebox executable
-#   Ice_ICEBOXXX11_EXECUTABLE - path to icebox++11 executable
-#   Ice_ICEBOXADMIN_EXECUTABLE - path to iceboxadmin executable
-#   Ice_ICEBOXD_EXECUTABLE - path to iceboxd executable
-#   Ice_ICEBOXNET_EXECUTABLE - path to iceboxnet executable
-#   Ice_ICEBRIDGE_EXECUTABLE - path to icebridge executable
-#   Ice_ICEGRIDADMIN_EXECUTABLE - path to icegridadmin executable
-#   Ice_ICEGRIDDB_EXECUTABLE - path to icegriddb executable
-#   Ice_ICEGRIDNODE_EXECUTABLE - path to icegridnode executable
-#   Ice_ICEGRIDNODED_EXECUTABLE - path to icegridnoded executable
-#   Ice_ICEGRIDREGISTRY_EXECUTABLE - path to icegridregistry executable
-#   Ice_ICEGRIDREGISTRYD_EXECUTABLE - path to icegridregistryd executable
-#   Ice_ICEPATCH2CALC_EXECUTABLE - path to icepatch2calc executable
-#   Ice_ICEPATCH2CLIENT_EXECUTABLE - path to icepatch2client executable
-#   Ice_ICEPATCH2SERVER_EXECUTABLE - path to icepatch2server executable
-#   Ice_ICESERVICEINSTALL_EXECUTABLE - path to iceserviceinstall executable
-#   Ice_ICESTORMADMIN_EXECUTABLE - path to icestormadmin executable
-#   Ice_ICESTORMDB_EXECUTABLE - path to icestormdb executable
-#   Ice_ICESTORMMIGRATE_EXECUTABLE - path to icestormmigrate executable
-#
-# Ice db programs (Windows only; standard system versions on all other
-# platforms) are reported in::
-#
-#   Ice_DB_ARCHIVE_EXECUTABLE - path to db_archive executable
-#   Ice_DB_CHECKPOINT_EXECUTABLE - path to db_checkpoint executable
-#   Ice_DB_DEADLOCK_EXECUTABLE - path to db_deadlock executable
-#   Ice_DB_DUMP_EXECUTABLE - path to db_dump executable
-#   Ice_DB_HOTBACKUP_EXECUTABLE - path to db_hotbackup executable
-#   Ice_DB_LOAD_EXECUTABLE - path to db_load executable
-#   Ice_DB_LOG_VERIFY_EXECUTABLE - path to db_log_verify executable
-#   Ice_DB_PRINTLOG_EXECUTABLE - path to db_printlog executable
-#   Ice_DB_RECOVER_EXECUTABLE - path to db_recover executable
-#   Ice_DB_STAT_EXECUTABLE - path to db_stat executable
-#   Ice_DB_TUNER_EXECUTABLE - path to db_tuner executable
-#   Ice_DB_UPGRADE_EXECUTABLE - path to db_upgrade executable
-#   Ice_DB_VERIFY_EXECUTABLE - path to db_verify executable
-#   Ice_DUMPDB_EXECUTABLE - path to dumpdb executable
-#   Ice_TRANSFORMDB_EXECUTABLE - path to transformdb executable
-#
-# Ice component libraries are reported in::
-#
-#   Ice_<C>_FOUND - ON if component was found
-#   Ice_<C>_LIBRARIES - libraries for component
-#
-# Note that ``<C>`` is the uppercased name of the component.
-#
-# This module reads hints about search results from::
-#
-#   Ice_HOME - the root of the Ice installation
-#
-# The environment variable ``ICE_HOME`` may also be used; the
-# Ice_HOME variable takes precedence.
-#
-# .. note::
-#   On Windows, Ice 3.7.0 and later provide libraries via the NuGet
-#   package manager.  Appropriate NuGet packages will be searched for
-#   using ``CMAKE_PREFIX_PATH``, or alternatively ``Ice_HOME`` may be
-#   set to the location of a specific NuGet package to restrict the
-#   search.
-#
-# The following cache variables may also be set::
-#
-#   Ice_<P>_EXECUTABLE - the path to executable <P>
-#   Ice_INCLUDE_DIR - the directory containing the Ice headers
-#   Ice_SLICE_DIR - the directory containing the Ice slice interface
-#                   definitions
-#   Ice_<C>_LIBRARY - the library for component <C>
-#
-# .. note::
-#
-#   In most cases none of the above variables will require setting,
-#   unless multiple Ice versions are available and a specific version
-#   is required.  On Windows, the most recent version of Ice will be
-#   found through the registry.  On Unix, the programs, headers and
-#   libraries will usually be in standard locations, but Ice_SLICE_DIRS
-#   might not be automatically detected (commonly known locations are
-#   searched).  All the other variables are defaulted using Ice_HOME,
-#   if set.  It's possible to set Ice_HOME and selectively specify
-#   alternative locations for the other components; this might be
-#   required for e.g. newer versions of Visual Studio if the
-#   heuristics are not sufficient to identify the correct programs and
-#   libraries for the specific Visual Studio version.
-#
-# Other variables one may set to control this module are::
-#
-#   Ice_DEBUG - Set to ON to enable debug output from FindIce.
+#[=======================================================================[.rst:
+FindIce
+-------
+
+Find the ZeroC Internet Communication Engine (ICE) programs,
+libraries and datafiles.
+
+This module supports multiple components.
+Components can include any of: ``Freeze``, ``Glacier2``, ``Ice``,
+``IceBox``, ``IceDB``, ``IceDiscovery``, ``IceGrid``,
+``IceLocatorDiscovery``, ``IcePatch``, ``IceSSL``, ``IceStorm``,
+``IceUtil``, ``IceXML``, or ``Slice``.
+
+Ice 3.7 and later also include C++11-specific components:
+``Glacier2++11``, ``Ice++11``, ``IceBox++11``, ``IceDiscovery++11``
+``IceGrid``, ``IceLocatorDiscovery++11``, ``IceSSL++11``,
+``IceStorm++11``
+
+Note that the set of supported components is Ice version-specific.
+
+This module reports information about the Ice installation in
+several variables.  General variables::
+
+  Ice_VERSION - Ice release version
+  Ice_FOUND - true if the main programs and libraries were found
+  Ice_LIBRARIES - component libraries to be linked
+  Ice_INCLUDE_DIRS - the directories containing the Ice headers
+  Ice_SLICE_DIRS - the directories containing the Ice slice interface
+                   definitions
+
+Imported targets::
+
+  Ice::<C>
+
+Where ``<C>`` is the name of an Ice component, for example
+``Ice::Glacier2`` or ``Ice++11``.
+
+Ice slice programs are reported in::
+
+  Ice_SLICE2CPP_EXECUTABLE - path to slice2cpp executable
+  Ice_SLICE2CS_EXECUTABLE - path to slice2cs executable
+  Ice_SLICE2FREEZEJ_EXECUTABLE - path to slice2freezej executable
+  Ice_SLICE2FREEZE_EXECUTABLE - path to slice2freeze executable
+  Ice_SLICE2HTML_EXECUTABLE - path to slice2html executable
+  Ice_SLICE2JAVA_EXECUTABLE - path to slice2java executable
+  Ice_SLICE2JS_EXECUTABLE - path to slice2js executable
+  Ice_SLICE2OBJC_EXECUTABLE - path to slice2objc executable
+  Ice_SLICE2PHP_EXECUTABLE - path to slice2php executable
+  Ice_SLICE2PY_EXECUTABLE - path to slice2py executable
+  Ice_SLICE2RB_EXECUTABLE - path to slice2rb executable
+
+Ice programs are reported in::
+
+  Ice_GLACIER2ROUTER_EXECUTABLE - path to glacier2router executable
+  Ice_ICEBOX_EXECUTABLE - path to icebox executable
+  Ice_ICEBOXXX11_EXECUTABLE - path to icebox++11 executable
+  Ice_ICEBOXADMIN_EXECUTABLE - path to iceboxadmin executable
+  Ice_ICEBOXD_EXECUTABLE - path to iceboxd executable
+  Ice_ICEBOXNET_EXECUTABLE - path to iceboxnet executable
+  Ice_ICEBRIDGE_EXECUTABLE - path to icebridge executable
+  Ice_ICEGRIDADMIN_EXECUTABLE - path to icegridadmin executable
+  Ice_ICEGRIDDB_EXECUTABLE - path to icegriddb executable
+  Ice_ICEGRIDNODE_EXECUTABLE - path to icegridnode executable
+  Ice_ICEGRIDNODED_EXECUTABLE - path to icegridnoded executable
+  Ice_ICEGRIDREGISTRY_EXECUTABLE - path to icegridregistry executable
+  Ice_ICEGRIDREGISTRYD_EXECUTABLE - path to icegridregistryd executable
+  Ice_ICEPATCH2CALC_EXECUTABLE - path to icepatch2calc executable
+  Ice_ICEPATCH2CLIENT_EXECUTABLE - path to icepatch2client executable
+  Ice_ICEPATCH2SERVER_EXECUTABLE - path to icepatch2server executable
+  Ice_ICESERVICEINSTALL_EXECUTABLE - path to iceserviceinstall executable
+  Ice_ICESTORMADMIN_EXECUTABLE - path to icestormadmin executable
+  Ice_ICESTORMDB_EXECUTABLE - path to icestormdb executable
+  Ice_ICESTORMMIGRATE_EXECUTABLE - path to icestormmigrate executable
+
+Ice db programs (Windows only; standard system versions on all other
+platforms) are reported in::
+
+  Ice_DB_ARCHIVE_EXECUTABLE - path to db_archive executable
+  Ice_DB_CHECKPOINT_EXECUTABLE - path to db_checkpoint executable
+  Ice_DB_DEADLOCK_EXECUTABLE - path to db_deadlock executable
+  Ice_DB_DUMP_EXECUTABLE - path to db_dump executable
+  Ice_DB_HOTBACKUP_EXECUTABLE - path to db_hotbackup executable
+  Ice_DB_LOAD_EXECUTABLE - path to db_load executable
+  Ice_DB_LOG_VERIFY_EXECUTABLE - path to db_log_verify executable
+  Ice_DB_PRINTLOG_EXECUTABLE - path to db_printlog executable
+  Ice_DB_RECOVER_EXECUTABLE - path to db_recover executable
+  Ice_DB_STAT_EXECUTABLE - path to db_stat executable
+  Ice_DB_TUNER_EXECUTABLE - path to db_tuner executable
+  Ice_DB_UPGRADE_EXECUTABLE - path to db_upgrade executable
+  Ice_DB_VERIFY_EXECUTABLE - path to db_verify executable
+  Ice_DUMPDB_EXECUTABLE - path to dumpdb executable
+  Ice_TRANSFORMDB_EXECUTABLE - path to transformdb executable
+
+Ice component libraries are reported in::
+
+  Ice_<C>_FOUND - ON if component was found
+  Ice_<C>_LIBRARIES - libraries for component
+
+Note that ``<C>`` is the uppercased name of the component.
+
+This module reads hints about search results from::
+
+  Ice_HOME - the root of the Ice installation
+
+The environment variable ``ICE_HOME`` may also be used; the
+Ice_HOME variable takes precedence.
+
+.. note::
+  On Windows, Ice 3.7.0 and later provide libraries via the NuGet
+  package manager.  Appropriate NuGet packages will be searched for
+  using ``CMAKE_PREFIX_PATH``, or alternatively ``Ice_HOME`` may be
+  set to the location of a specific NuGet package to restrict the
+  search.
+
+The following cache variables may also be set::
+
+  Ice_<P>_EXECUTABLE - the path to executable <P>
+  Ice_INCLUDE_DIR - the directory containing the Ice headers
+  Ice_SLICE_DIR - the directory containing the Ice slice interface
+                  definitions
+  Ice_<C>_LIBRARY - the library for component <C>
+
+.. note::
+
+  In most cases none of the above variables will require setting,
+  unless multiple Ice versions are available and a specific version
+  is required.  On Windows, the most recent version of Ice will be
+  found through the registry.  On Unix, the programs, headers and
+  libraries will usually be in standard locations, but Ice_SLICE_DIRS
+  might not be automatically detected (commonly known locations are
+  searched).  All the other variables are defaulted using Ice_HOME,
+  if set.  It's possible to set Ice_HOME and selectively specify
+  alternative locations for the other components; this might be
+  required for e.g. newer versions of Visual Studio if the
+  heuristics are not sufficient to identify the correct programs and
+  libraries for the specific Visual Studio version.
+
+Other variables one may set to control this module are::
+
+  Ice_DEBUG - Set to ON to enable debug output from FindIce.
+#]=======================================================================]
 
 # Written by Roger Leigh <rleigh@codelibre.net>
 
diff --git a/Modules/FindIcotool.cmake b/Modules/FindIcotool.cmake
index 26e95a0..32fc4ae 100644
--- a/Modules/FindIcotool.cmake
+++ b/Modules/FindIcotool.cmake
@@ -1,20 +1,21 @@
 # Distributed under the OSI-approved BSD 3-Clause License.  See accompanying
 # file Copyright.txt or https://cmake.org/licensing for details.
 
-#.rst:
-# FindIcotool
-# -----------
-#
-# Find icotool
-#
-# This module looks for icotool.  This module defines the following
-# values:
-#
-# ::
-#
-#   ICOTOOL_EXECUTABLE: the full path to the icotool tool.
-#   ICOTOOL_FOUND: True if icotool has been found.
-#   ICOTOOL_VERSION_STRING: the version of icotool found.
+#[=======================================================================[.rst:
+FindIcotool
+-----------
+
+Find icotool
+
+This module looks for icotool.  This module defines the following
+values:
+
+::
+
+  ICOTOOL_EXECUTABLE: the full path to the icotool tool.
+  ICOTOOL_FOUND: True if icotool has been found.
+  ICOTOOL_VERSION_STRING: the version of icotool found.
+#]=======================================================================]
 
 find_program(ICOTOOL_EXECUTABLE
   icotool
diff --git a/Modules/FindImageMagick.cmake b/Modules/FindImageMagick.cmake
index 6d94d3b..2ddd11c 100644
--- a/Modules/FindImageMagick.cmake
+++ b/Modules/FindImageMagick.cmake
@@ -1,87 +1,88 @@
 # Distributed under the OSI-approved BSD 3-Clause License.  See accompanying
 # file Copyright.txt or https://cmake.org/licensing for details.
 
-#.rst:
-# FindImageMagick
-# ---------------
-#
-# Find the ImageMagick binary suite.
-#
-# This module will search for a set of ImageMagick tools specified as
-# components in the FIND_PACKAGE call.  Typical components include, but
-# are not limited to (future versions of ImageMagick might have
-# additional components not listed here):
-#
-# ::
-#
-#   animate
-#   compare
-#   composite
-#   conjure
-#   convert
-#   display
-#   identify
-#   import
-#   mogrify
-#   montage
-#   stream
-#
-#
-#
-# If no component is specified in the FIND_PACKAGE call, then it only
-# searches for the ImageMagick executable directory.  This code defines
-# the following variables:
-#
-# ::
-#
-#   ImageMagick_FOUND                  - TRUE if all components are found.
-#   ImageMagick_EXECUTABLE_DIR         - Full path to executables directory.
-#   ImageMagick_<component>_FOUND      - TRUE if <component> is found.
-#   ImageMagick_<component>_EXECUTABLE - Full path to <component> executable.
-#   ImageMagick_VERSION_STRING         - the version of ImageMagick found
-#                                        (since CMake 2.8.8)
-#
-#
-#
-# ImageMagick_VERSION_STRING will not work for old versions like 5.2.3.
-#
-# There are also components for the following ImageMagick APIs:
-#
-# ::
-#
-#   Magick++
-#   MagickWand
-#   MagickCore
-#
-#
-#
-# For these components the following variables are set:
-#
-# ::
-#
-#   ImageMagick_FOUND                    - TRUE if all components are found.
-#   ImageMagick_INCLUDE_DIRS             - Full paths to all include dirs.
-#   ImageMagick_LIBRARIES                - Full paths to all libraries.
-#   ImageMagick_<component>_FOUND        - TRUE if <component> is found.
-#   ImageMagick_<component>_INCLUDE_DIRS - Full path to <component> include dirs.
-#   ImageMagick_<component>_LIBRARIES    - Full path to <component> libraries.
-#
-#
-#
-# Example Usages:
-#
-# ::
-#
-#   find_package(ImageMagick)
-#   find_package(ImageMagick COMPONENTS convert)
-#   find_package(ImageMagick COMPONENTS convert mogrify display)
-#   find_package(ImageMagick COMPONENTS Magick++)
-#   find_package(ImageMagick COMPONENTS Magick++ convert)
-#
-#
-#
-# Note that the standard FIND_PACKAGE features are supported (i.e.,
-# QUIET, REQUIRED, etc.).
+#[=======================================================================[.rst:
+FindImageMagick
+---------------
+
+Find the ImageMagick binary suite.
+
+This module will search for a set of ImageMagick tools specified as
+components in the FIND_PACKAGE call.  Typical components include, but
+are not limited to (future versions of ImageMagick might have
+additional components not listed here):
+
+::
+
+  animate
+  compare
+  composite
+  conjure
+  convert
+  display
+  identify
+  import
+  mogrify
+  montage
+  stream
+
+
+
+If no component is specified in the FIND_PACKAGE call, then it only
+searches for the ImageMagick executable directory.  This code defines
+the following variables:
+
+::
+
+  ImageMagick_FOUND                  - TRUE if all components are found.
+  ImageMagick_EXECUTABLE_DIR         - Full path to executables directory.
+  ImageMagick_<component>_FOUND      - TRUE if <component> is found.
+  ImageMagick_<component>_EXECUTABLE - Full path to <component> executable.
+  ImageMagick_VERSION_STRING         - the version of ImageMagick found
+                                       (since CMake 2.8.8)
+
+
+
+ImageMagick_VERSION_STRING will not work for old versions like 5.2.3.
+
+There are also components for the following ImageMagick APIs:
+
+::
+
+  Magick++
+  MagickWand
+  MagickCore
+
+
+
+For these components the following variables are set:
+
+::
+
+  ImageMagick_FOUND                    - TRUE if all components are found.
+  ImageMagick_INCLUDE_DIRS             - Full paths to all include dirs.
+  ImageMagick_LIBRARIES                - Full paths to all libraries.
+  ImageMagick_<component>_FOUND        - TRUE if <component> is found.
+  ImageMagick_<component>_INCLUDE_DIRS - Full path to <component> include dirs.
+  ImageMagick_<component>_LIBRARIES    - Full path to <component> libraries.
+
+
+
+Example Usages:
+
+::
+
+  find_package(ImageMagick)
+  find_package(ImageMagick COMPONENTS convert)
+  find_package(ImageMagick COMPONENTS convert mogrify display)
+  find_package(ImageMagick COMPONENTS Magick++)
+  find_package(ImageMagick COMPONENTS Magick++ convert)
+
+
+
+Note that the standard FIND_PACKAGE features are supported (i.e.,
+QUIET, REQUIRED, etc.).
+#]=======================================================================]
 
 find_package(PkgConfig QUIET)
 
diff --git a/Modules/FindIntl.cmake b/Modules/FindIntl.cmake
index f887721..3818d45 100644
--- a/Modules/FindIntl.cmake
+++ b/Modules/FindIntl.cmake
@@ -1,33 +1,34 @@
 # Distributed under the OSI-approved BSD 3-Clause License.  See accompanying
 # file Copyright.txt or https://cmake.org/licensing for details.
 
-#.rst:
-# FindIntl
-# --------
-#
-# Find the Gettext libintl headers and libraries.
-#
-# This module reports information about the Gettext libintl
-# installation in several variables.  General variables::
-#
-#   Intl_FOUND - true if the libintl headers and libraries were found
-#   Intl_INCLUDE_DIRS - the directory containing the libintl headers
-#   Intl_LIBRARIES - libintl libraries to be linked
-#
-# The following cache variables may also be set::
-#
-#   Intl_INCLUDE_DIR - the directory containing the libintl headers
-#   Intl_LIBRARY - the libintl library (if any)
-#
-# .. note::
-#   On some platforms, such as Linux with GNU libc, the gettext
-#   functions are present in the C standard library and libintl
-#   is not required.  ``Intl_LIBRARIES`` will be empty in this
-#   case.
-#
-# .. note::
-#   If you wish to use the Gettext tools (``msgmerge``,
-#   ``msgfmt``, etc.), use :module:`FindGettext`.
+#[=======================================================================[.rst:
+FindIntl
+--------
+
+Find the Gettext libintl headers and libraries.
+
+This module reports information about the Gettext libintl
+installation in several variables.  General variables::
+
+  Intl_FOUND - true if the libintl headers and libraries were found
+  Intl_INCLUDE_DIRS - the directory containing the libintl headers
+  Intl_LIBRARIES - libintl libraries to be linked
+
+The following cache variables may also be set::
+
+  Intl_INCLUDE_DIR - the directory containing the libintl headers
+  Intl_LIBRARY - the libintl library (if any)
+
+.. note::
+  On some platforms, such as Linux with GNU libc, the gettext
+  functions are present in the C standard library and libintl
+  is not required.  ``Intl_LIBRARIES`` will be empty in this
+  case.
+
+.. note::
+  If you wish to use the Gettext tools (``msgmerge``,
+  ``msgfmt``, etc.), use :module:`FindGettext`.
+#]=======================================================================]
 
 
 # Written by Roger Leigh <rleigh@codelibre.net>
diff --git a/Modules/FindJPEG.cmake b/Modules/FindJPEG.cmake
index 7290724..0aa387a 100644
--- a/Modules/FindJPEG.cmake
+++ b/Modules/FindJPEG.cmake
@@ -1,53 +1,54 @@
 # Distributed under the OSI-approved BSD 3-Clause License.  See accompanying
 # file Copyright.txt or https://cmake.org/licensing for details.
 
-#.rst:
-# FindJPEG
-# --------
-#
-# Find the JPEG library (libjpeg)
-#
-# Imported targets
-# ^^^^^^^^^^^^^^^^
-#
-# This module defines the following :prop_tgt:`IMPORTED` targets:
-#
-# ``JPEG::JPEG``
-#   The JPEG library, if found.
-#
-# Result variables
-# ^^^^^^^^^^^^^^^^
-#
-# This module will set the following variables in your project:
-#
-# ``JPEG_FOUND``
-#   If false, do not try to use JPEG.
-# ``JPEG_INCLUDE_DIRS``
-#   where to find jpeglib.h, etc.
-# ``JPEG_LIBRARIES``
-#   the libraries needed to use JPEG.
-# ``JPEG_VERSION``
-#   the version of the JPEG library found
-#
-# Cache variables
-# ^^^^^^^^^^^^^^^
-#
-# The following cache variables may also be set:
-#
-# ``JPEG_INCLUDE_DIRS``
-#   where to find jpeglib.h, etc.
-# ``JPEG_LIBRARY_RELEASE``
-#   where to find the JPEG library (optimized).
-# ``JPEG_LIBRARY_DEBUG``
-#   where to find the JPEG library (debug).
-#
-# Obsolete variables
-# ^^^^^^^^^^^^^^^^^^
-#
-# ``JPEG_INCLUDE_DIR``
-#   where to find jpeglib.h, etc. (same as JPEG_INCLUDE_DIRS)
-# ``JPEG_LIBRARY``
-#   where to find the JPEG library.
+#[=======================================================================[.rst:
+FindJPEG
+--------
+
+Find the JPEG library (libjpeg)
+
+Imported targets
+^^^^^^^^^^^^^^^^
+
+This module defines the following :prop_tgt:`IMPORTED` targets:
+
+``JPEG::JPEG``
+  The JPEG library, if found.
+
+Result variables
+^^^^^^^^^^^^^^^^
+
+This module will set the following variables in your project:
+
+``JPEG_FOUND``
+  If false, do not try to use JPEG.
+``JPEG_INCLUDE_DIRS``
+  where to find jpeglib.h, etc.
+``JPEG_LIBRARIES``
+  the libraries needed to use JPEG.
+``JPEG_VERSION``
+  the version of the JPEG library found
+
+Cache variables
+^^^^^^^^^^^^^^^
+
+The following cache variables may also be set:
+
+``JPEG_INCLUDE_DIRS``
+  where to find jpeglib.h, etc.
+``JPEG_LIBRARY_RELEASE``
+  where to find the JPEG library (optimized).
+``JPEG_LIBRARY_DEBUG``
+  where to find the JPEG library (debug).
+
+Obsolete variables
+^^^^^^^^^^^^^^^^^^
+
+``JPEG_INCLUDE_DIR``
+  where to find jpeglib.h, etc. (same as JPEG_INCLUDE_DIRS)
+``JPEG_LIBRARY``
+  where to find the JPEG library.
+#]=======================================================================]
 
 find_path(JPEG_INCLUDE_DIR jpeglib.h)
 
diff --git a/Modules/FindJasper.cmake b/Modules/FindJasper.cmake
index db76657..dd0e984 100644
--- a/Modules/FindJasper.cmake
+++ b/Modules/FindJasper.cmake
@@ -1,20 +1,21 @@
 # Distributed under the OSI-approved BSD 3-Clause License.  See accompanying
 # file Copyright.txt or https://cmake.org/licensing for details.
 
-#.rst:
-# FindJasper
-# ----------
-#
-# Try to find the Jasper JPEG2000 library
-#
-# Once done this will define
-#
-# ::
-#
-#   JASPER_FOUND - system has Jasper
-#   JASPER_INCLUDE_DIR - the Jasper include directory
-#   JASPER_LIBRARIES - the libraries needed to use Jasper
-#   JASPER_VERSION_STRING - the version of Jasper found (since CMake 2.8.8)
+#[=======================================================================[.rst:
+FindJasper
+----------
+
+Try to find the Jasper JPEG2000 library
+
+Once done this will define
+
+::
+
+  JASPER_FOUND - system has Jasper
+  JASPER_INCLUDE_DIR - the Jasper include directory
+  JASPER_LIBRARIES - the libraries needed to use Jasper
+  JASPER_VERSION_STRING - the version of Jasper found (since CMake 2.8.8)
+#]=======================================================================]
 
 find_path(JASPER_INCLUDE_DIR jasper/jasper.h)
 
diff --git a/Modules/FindJava.cmake b/Modules/FindJava.cmake
index bcdf166..0d62cd6 100644
--- a/Modules/FindJava.cmake
+++ b/Modules/FindJava.cmake
@@ -1,79 +1,80 @@
 # Distributed under the OSI-approved BSD 3-Clause License.  See accompanying
 # file Copyright.txt or https://cmake.org/licensing for details.
 
-#.rst:
-# FindJava
-# --------
-#
-# Find Java
-#
-# This module finds if Java is installed and determines where the
-# include files and libraries are.  The caller may set variable ``JAVA_HOME``
-# to specify a Java installation prefix explicitly.
-#
-# See also the :module:`FindJNI` module to find Java Native Interface (JNI).
-#
-# Specify one or more of the following components as you call this find module. See example below.
-#
-# ::
-#
-#   Runtime     = Java Runtime Environment used to execute Java byte-compiled applications
-#   Development = Development tools (java, javac, javah, jar and javadoc), includes Runtime component
-#   IdlJ        = Interface Description Language (IDL) to Java compiler
-#   JarSigner   = Signer and verifier tool for Java Archive (JAR) files
-#
-#
-# This module sets the following result variables:
-#
-# ::
-#
-#   Java_JAVA_EXECUTABLE      = the full path to the Java runtime
-#   Java_JAVAC_EXECUTABLE     = the full path to the Java compiler
-#   Java_JAVAH_EXECUTABLE     = the full path to the Java header generator
-#   Java_JAVADOC_EXECUTABLE   = the full path to the Java documentation generator
-#   Java_IDLJ_EXECUTABLE      = the full path to the Java idl compiler
-#   Java_JAR_EXECUTABLE       = the full path to the Java archiver
-#   Java_JARSIGNER_EXECUTABLE = the full path to the Java jar signer
-#   Java_VERSION_STRING       = Version of java found, eg. 1.6.0_12
-#   Java_VERSION_MAJOR        = The major version of the package found.
-#   Java_VERSION_MINOR        = The minor version of the package found.
-#   Java_VERSION_PATCH        = The patch version of the package found.
-#   Java_VERSION_TWEAK        = The tweak version of the package found (after '_')
-#   Java_VERSION              = This is set to: $major[.$minor[.$patch[.$tweak]]]
-#
-#
-#
-# The minimum required version of Java can be specified using the
-# :command:`find_package` syntax, e.g.
-#
-# .. code-block:: cmake
-#
-#   find_package(Java 1.8)
-#
-# NOTE: ``${Java_VERSION}`` and ``${Java_VERSION_STRING}`` are not guaranteed to
-# be identical.  For example some java version may return:
-# ``Java_VERSION_STRING = 1.8.0_17`` and ``Java_VERSION = 1.8.0.17``
-#
-# another example is the Java OEM, with: ``Java_VERSION_STRING = 1.8.0-oem``
-# and ``Java_VERSION = 1.8.0``
-#
-# For these components the following variables are set:
-#
-# ::
-#
-#   Java_FOUND                    - TRUE if all components are found.
-#   Java_<component>_FOUND        - TRUE if <component> is found.
-#
-#
-#
-# Example Usages:
-#
-# ::
-#
-#   find_package(Java)
-#   find_package(Java 1.8 REQUIRED)
-#   find_package(Java COMPONENTS Runtime)
-#   find_package(Java COMPONENTS Development)
+#[=======================================================================[.rst:
+FindJava
+--------
+
+Find Java
+
+This module finds if Java is installed and determines where the
+include files and libraries are.  The caller may set variable ``JAVA_HOME``
+to specify a Java installation prefix explicitly.
+
+See also the :module:`FindJNI` module to find Java Native Interface (JNI).
+
+Specify one or more of the following components as you call this find module. See example below.
+
+::
+
+  Runtime     = Java Runtime Environment used to execute Java byte-compiled applications
+  Development = Development tools (java, javac, javah, jar and javadoc), includes Runtime component
+  IdlJ        = Interface Description Language (IDL) to Java compiler
+  JarSigner   = Signer and verifier tool for Java Archive (JAR) files
+
+
+This module sets the following result variables:
+
+::
+
+  Java_JAVA_EXECUTABLE      = the full path to the Java runtime
+  Java_JAVAC_EXECUTABLE     = the full path to the Java compiler
+  Java_JAVAH_EXECUTABLE     = the full path to the Java header generator
+  Java_JAVADOC_EXECUTABLE   = the full path to the Java documentation generator
+  Java_IDLJ_EXECUTABLE      = the full path to the Java idl compiler
+  Java_JAR_EXECUTABLE       = the full path to the Java archiver
+  Java_JARSIGNER_EXECUTABLE = the full path to the Java jar signer
+  Java_VERSION_STRING       = Version of java found, eg. 1.6.0_12
+  Java_VERSION_MAJOR        = The major version of the package found.
+  Java_VERSION_MINOR        = The minor version of the package found.
+  Java_VERSION_PATCH        = The patch version of the package found.
+  Java_VERSION_TWEAK        = The tweak version of the package found (after '_')
+  Java_VERSION              = This is set to: $major[.$minor[.$patch[.$tweak]]]
+
+
+
+The minimum required version of Java can be specified using the
+:command:`find_package` syntax, e.g.
+
+.. code-block:: cmake
+
+  find_package(Java 1.8)
+
+NOTE: ``${Java_VERSION}`` and ``${Java_VERSION_STRING}`` are not guaranteed to
+be identical.  For example some java version may return:
+``Java_VERSION_STRING = 1.8.0_17`` and ``Java_VERSION = 1.8.0.17``
+
+another example is the Java OEM, with: ``Java_VERSION_STRING = 1.8.0-oem``
+and ``Java_VERSION = 1.8.0``
+
+For these components the following variables are set:
+
+::
+
+  Java_FOUND                    - TRUE if all components are found.
+  Java_<component>_FOUND        - TRUE if <component> is found.
+
+
+
+Example Usages:
+
+::
+
+  find_package(Java)
+  find_package(Java 1.8 REQUIRED)
+  find_package(Java COMPONENTS Runtime)
+  find_package(Java COMPONENTS Development)
+#]=======================================================================]
 
 include(${CMAKE_CURRENT_LIST_DIR}/CMakeFindJavaCommon.cmake)
 
diff --git a/Modules/FindKDE3.cmake b/Modules/FindKDE3.cmake
index daf6818..c7ad6e1 100644
--- a/Modules/FindKDE3.cmake
+++ b/Modules/FindKDE3.cmake
@@ -1,141 +1,142 @@
 # Distributed under the OSI-approved BSD 3-Clause License.  See accompanying
 # file Copyright.txt or https://cmake.org/licensing for details.
 
-#.rst:
-# FindKDE3
-# --------
-#
-# Find the KDE3 include and library dirs, KDE preprocessors and define a some macros
-#
-#
-#
-# This module defines the following variables:
-#
-# ``KDE3_DEFINITIONS``
-#   compiler definitions required for compiling KDE software
-# ``KDE3_INCLUDE_DIR``
-#   the KDE include directory
-# ``KDE3_INCLUDE_DIRS``
-#   the KDE and the Qt include directory, for use with include_directories()
-# ``KDE3_LIB_DIR``
-#   the directory where the KDE libraries are installed, for use with link_directories()
-# ``QT_AND_KDECORE_LIBS``
-#   this contains both the Qt and the kdecore library
-# ``KDE3_DCOPIDL_EXECUTABLE``
-#   the dcopidl executable
-# ``KDE3_DCOPIDL2CPP_EXECUTABLE``
-#   the dcopidl2cpp executable
-# ``KDE3_KCFGC_EXECUTABLE``
-#   the kconfig_compiler executable
-# ``KDE3_FOUND``
-#   set to TRUE if all of the above has been found
-#
-# The following user adjustable options are provided:
-#
-# ``KDE3_BUILD_TESTS``
-#   enable this to build KDE testcases
-#
-# It also adds the following macros (from KDE3Macros.cmake) SRCS_VAR is
-# always the variable which contains the list of source files for your
-# application or library.
-#
-# KDE3_AUTOMOC(file1 ...  fileN)
-#
-# ::
-#
-#     Call this if you want to have automatic moc file handling.
-#     This means if you include "foo.moc" in the source file foo.cpp
-#     a moc file for the header foo.h will be created automatically.
-#     You can set the property SKIP_AUTOMAKE using set_source_files_properties()
-#     to exclude some files in the list from being processed.
-#
-#
-#
-# KDE3_ADD_MOC_FILES(SRCS_VAR file1 ...  fileN )
-#
-# ::
-#
-#     If you don't use the KDE3_AUTOMOC() macro, for the files
-#     listed here moc files will be created (named "foo.moc.cpp")
-#
-#
-#
-# KDE3_ADD_DCOP_SKELS(SRCS_VAR header1.h ...  headerN.h )
-#
-# ::
-#
-#     Use this to generate DCOP skeletions from the listed headers.
-#
-#
-#
-# KDE3_ADD_DCOP_STUBS(SRCS_VAR header1.h ...  headerN.h )
-#
-# ::
-#
-#      Use this to generate DCOP stubs from the listed headers.
-#
-#
-#
-# KDE3_ADD_UI_FILES(SRCS_VAR file1.ui ...  fileN.ui )
-#
-# ::
-#
-#     Use this to add the Qt designer ui files to your application/library.
-#
-#
-#
-# KDE3_ADD_KCFG_FILES(SRCS_VAR file1.kcfgc ...  fileN.kcfgc )
-#
-# ::
-#
-#     Use this to add KDE kconfig compiler files to your application/library.
-#
-#
-#
-# KDE3_INSTALL_LIBTOOL_FILE(target)
-#
-# ::
-#
-#     This will create and install a simple libtool file for the given target.
-#
-#
-#
-# KDE3_ADD_EXECUTABLE(name file1 ...  fileN )
-#
-# ::
-#
-#     Currently identical to add_executable(), may provide some advanced
-#     features in the future.
-#
-#
-#
-# KDE3_ADD_KPART(name [WITH_PREFIX] file1 ...  fileN )
-#
-# ::
-#
-#     Create a KDE plugin (KPart, kioslave, etc.) from the given source files.
-#     If WITH_PREFIX is given, the resulting plugin will have the prefix "lib",
-#     otherwise it won't.
-#     It creates and installs an appropriate libtool la-file.
-#
-#
-#
-# KDE3_ADD_KDEINIT_EXECUTABLE(name file1 ...  fileN )
-#
-# ::
-#
-#     Create a KDE application in the form of a module loadable via kdeinit.
-#     A library named kdeinit_<name> will be created and a small executable
-#     which links to it.
-#
-#
-#
-# The option KDE3_ENABLE_FINAL to enable all-in-one compilation is no
-# longer supported.
-#
-#
-#
-# Author: Alexander Neundorf <neundorf@kde.org>
+#[=======================================================================[.rst:
+FindKDE3
+--------
+
+Find the KDE3 include and library dirs, KDE preprocessors and define a some macros
+
+
+
+This module defines the following variables:
+
+``KDE3_DEFINITIONS``
+  compiler definitions required for compiling KDE software
+``KDE3_INCLUDE_DIR``
+  the KDE include directory
+``KDE3_INCLUDE_DIRS``
+  the KDE and the Qt include directory, for use with include_directories()
+``KDE3_LIB_DIR``
+  the directory where the KDE libraries are installed, for use with link_directories()
+``QT_AND_KDECORE_LIBS``
+  this contains both the Qt and the kdecore library
+``KDE3_DCOPIDL_EXECUTABLE``
+  the dcopidl executable
+``KDE3_DCOPIDL2CPP_EXECUTABLE``
+  the dcopidl2cpp executable
+``KDE3_KCFGC_EXECUTABLE``
+  the kconfig_compiler executable
+``KDE3_FOUND``
+  set to TRUE if all of the above has been found
+
+The following user adjustable options are provided:
+
+``KDE3_BUILD_TESTS``
+  enable this to build KDE testcases
+
+It also adds the following macros (from KDE3Macros.cmake) SRCS_VAR is
+always the variable which contains the list of source files for your
+application or library.
+
+KDE3_AUTOMOC(file1 ...  fileN)
+
+::
+
+    Call this if you want to have automatic moc file handling.
+    This means if you include "foo.moc" in the source file foo.cpp
+    a moc file for the header foo.h will be created automatically.
+    You can set the property SKIP_AUTOMAKE using set_source_files_properties()
+    to exclude some files in the list from being processed.
+
+
+
+KDE3_ADD_MOC_FILES(SRCS_VAR file1 ...  fileN )
+
+::
+
+    If you don't use the KDE3_AUTOMOC() macro, for the files
+    listed here moc files will be created (named "foo.moc.cpp")
+
+
+
+KDE3_ADD_DCOP_SKELS(SRCS_VAR header1.h ...  headerN.h )
+
+::
+
+    Use this to generate DCOP skeletions from the listed headers.
+
+
+
+KDE3_ADD_DCOP_STUBS(SRCS_VAR header1.h ...  headerN.h )
+
+::
+
+     Use this to generate DCOP stubs from the listed headers.
+
+
+
+KDE3_ADD_UI_FILES(SRCS_VAR file1.ui ...  fileN.ui )
+
+::
+
+    Use this to add the Qt designer ui files to your application/library.
+
+
+
+KDE3_ADD_KCFG_FILES(SRCS_VAR file1.kcfgc ...  fileN.kcfgc )
+
+::
+
+    Use this to add KDE kconfig compiler files to your application/library.
+
+
+
+KDE3_INSTALL_LIBTOOL_FILE(target)
+
+::
+
+    This will create and install a simple libtool file for the given target.
+
+
+
+KDE3_ADD_EXECUTABLE(name file1 ...  fileN )
+
+::
+
+    Currently identical to add_executable(), may provide some advanced
+    features in the future.
+
+
+
+KDE3_ADD_KPART(name [WITH_PREFIX] file1 ...  fileN )
+
+::
+
+    Create a KDE plugin (KPart, kioslave, etc.) from the given source files.
+    If WITH_PREFIX is given, the resulting plugin will have the prefix "lib",
+    otherwise it won't.
+    It creates and installs an appropriate libtool la-file.
+
+
+
+KDE3_ADD_KDEINIT_EXECUTABLE(name file1 ...  fileN )
+
+::
+
+    Create a KDE application in the form of a module loadable via kdeinit.
+    A library named kdeinit_<name> will be created and a small executable
+    which links to it.
+
+
+
+The option KDE3_ENABLE_FINAL to enable all-in-one compilation is no
+longer supported.
+
+
+
+Author: Alexander Neundorf <neundorf@kde.org>
+#]=======================================================================]
 
 if(NOT UNIX AND KDE3_FIND_REQUIRED)
    message(FATAL_ERROR "Compiling KDE3 applications and libraries under Windows is not supported")
diff --git a/Modules/FindKDE4.cmake b/Modules/FindKDE4.cmake
index bb98e53..c04804b 100644
--- a/Modules/FindKDE4.cmake
+++ b/Modules/FindKDE4.cmake
@@ -1,29 +1,30 @@
 # Distributed under the OSI-approved BSD 3-Clause License.  See accompanying
 # file Copyright.txt or https://cmake.org/licensing for details.
 
-#.rst:
-# FindKDE4
-# --------
-#
-#
-#
-# Find KDE4 and provide all necessary variables and macros to compile
-# software for it.  It looks for KDE 4 in the following directories in
-# the given order:
-#
-# ::
-#
-#   CMAKE_INSTALL_PREFIX
-#   KDEDIRS
-#   /opt/kde4
-#
-#
-#
-# Please look in FindKDE4Internal.cmake and KDE4Macros.cmake for more
-# information.  They are installed with the KDE 4 libraries in
-# $KDEDIRS/share/apps/cmake/modules/.
-#
-# Author: Alexander Neundorf <neundorf@kde.org>
+#[=======================================================================[.rst:
+FindKDE4
+--------
+
+
+
+Find KDE4 and provide all necessary variables and macros to compile
+software for it.  It looks for KDE 4 in the following directories in
+the given order:
+
+::
+
+  CMAKE_INSTALL_PREFIX
+  KDEDIRS
+  /opt/kde4
+
+
+
+Please look in FindKDE4Internal.cmake and KDE4Macros.cmake for more
+information.  They are installed with the KDE 4 libraries in
+$KDEDIRS/share/apps/cmake/modules/.
+
+Author: Alexander Neundorf <neundorf@kde.org>
+#]=======================================================================]
 
 # If Qt3 has already been found, fail.
 if(QT_QT_LIBRARY)
diff --git a/Modules/FindLAPACK.cmake b/Modules/FindLAPACK.cmake
index 7ca9950..31e5620b 100644
--- a/Modules/FindLAPACK.cmake
+++ b/Modules/FindLAPACK.cmake
@@ -1,48 +1,49 @@
 # Distributed under the OSI-approved BSD 3-Clause License.  See accompanying
 # file Copyright.txt or https://cmake.org/licensing for details.
 
-#.rst:
-# FindLAPACK
-# ----------
-#
-# Find LAPACK library
-#
-# This module finds an installed fortran library that implements the
-# LAPACK linear-algebra interface (see http://www.netlib.org/lapack/).
-#
-# The approach follows that taken for the autoconf macro file,
-# acx_lapack.m4 (distributed at
-# http://ac-archive.sourceforge.net/ac-archive/acx_lapack.html).
-#
-# This module sets the following variables:
-#
-# ::
-#
-#   LAPACK_FOUND - set to true if a library implementing the LAPACK interface
-#     is found
-#   LAPACK_LINKER_FLAGS - uncached list of required linker flags (excluding -l
-#     and -L).
-#   LAPACK_LIBRARIES - uncached list of libraries (using full path name) to
-#     link against to use LAPACK
-#   LAPACK95_LIBRARIES - uncached list of libraries (using full path name) to
-#     link against to use LAPACK95
-#   LAPACK95_FOUND - set to true if a library implementing the LAPACK f95
-#     interface is found
-#   BLA_STATIC  if set on this determines what kind of linkage we do (static)
-#   BLA_VENDOR  if set checks only the specified vendor, if not set checks
-#      all the possibilities
-#   BLA_F95     if set on tries to find the f95 interfaces for BLAS/LAPACK
-#
-# List of vendors (BLA_VENDOR) valid in this module:
-#
-# * Intel(mkl)
-# * OpenBLAS
-# * FLAME
-# * ACML
-# * Apple
-# * NAS
-# * Generic
-#
+#[=======================================================================[.rst:
+FindLAPACK
+----------
+
+Find LAPACK library
+
+This module finds an installed fortran library that implements the
+LAPACK linear-algebra interface (see http://www.netlib.org/lapack/).
+
+The approach follows that taken for the autoconf macro file,
+acx_lapack.m4 (distributed at
+http://ac-archive.sourceforge.net/ac-archive/acx_lapack.html).
+
+This module sets the following variables:
+
+::
+
+  LAPACK_FOUND - set to true if a library implementing the LAPACK interface
+    is found
+  LAPACK_LINKER_FLAGS - uncached list of required linker flags (excluding -l
+    and -L).
+  LAPACK_LIBRARIES - uncached list of libraries (using full path name) to
+    link against to use LAPACK
+  LAPACK95_LIBRARIES - uncached list of libraries (using full path name) to
+    link against to use LAPACK95
+  LAPACK95_FOUND - set to true if a library implementing the LAPACK f95
+    interface is found
+  BLA_STATIC  if set on this determines what kind of linkage we do (static)
+  BLA_VENDOR  if set checks only the specified vendor, if not set checks
+     all the possibilities
+  BLA_F95     if set on tries to find the f95 interfaces for BLAS/LAPACK
+
+List of vendors (BLA_VENDOR) valid in this module:
+
+* Intel(mkl)
+* OpenBLAS
+* FLAME
+* ACML
+* Apple
+* NAS
+* Generic
+
+#]=======================================================================]
 
 set(_lapack_ORIG_CMAKE_FIND_LIBRARY_SUFFIXES ${CMAKE_FIND_LIBRARY_SUFFIXES})
 
diff --git a/Modules/FindLATEX.cmake b/Modules/FindLATEX.cmake
index d1f4fa4..01f4793 100644
--- a/Modules/FindLATEX.cmake
+++ b/Modules/FindLATEX.cmake
@@ -1,56 +1,57 @@
 # Distributed under the OSI-approved BSD 3-Clause License.  See accompanying
 # file Copyright.txt or https://cmake.org/licensing for details.
 
-#.rst:
-# FindLATEX
-# ---------
-#
-# Find Latex
-#
-# This module finds an installed Latex and determines the location
-# of the compiler.  Additionally the module looks for Latex-related
-# software like BibTeX.
-#
-# This module sets the following result variables::
-#
-#   LATEX_FOUND:          whether found Latex and requested components
-#   LATEX_<component>_FOUND:  whether found <component>
-#   LATEX_COMPILER:       path to the LaTeX compiler
-#   PDFLATEX_COMPILER:    path to the PdfLaTeX compiler
-#   XELATEX_COMPILER:     path to the XeLaTeX compiler
-#   LUALATEX_COMPILER:    path to the LuaLaTeX compiler
-#   BIBTEX_COMPILER:      path to the BibTeX compiler
-#   BIBER_COMPILER:       path to the Biber compiler
-#   MAKEINDEX_COMPILER:   path to the MakeIndex compiler
-#   XINDY_COMPILER:       path to the xindy compiler
-#   DVIPS_CONVERTER:      path to the DVIPS converter
-#   DVIPDF_CONVERTER:     path to the DVIPDF converter
-#   PS2PDF_CONVERTER:     path to the PS2PDF converter
-#   PDFTOPS_CONVERTER:    path to the pdftops converter
-#   LATEX2HTML_CONVERTER: path to the LaTeX2Html converter
-#   HTLATEX_COMPILER:     path to the htlatex compiler
-#
-# Possible components are::
-#
-#   PDFLATEX
-#   XELATEX
-#   LUALATEX
-#   BIBTEX
-#   BIBER
-#   MAKEINDEX
-#   XINDY
-#   DVIPS
-#   DVIPDF
-#   PS2PDF
-#   PDFTOPS
-#   LATEX2HTML
-#   HTLATEX
-#
-# Example Usages::
-#
-#   find_package(LATEX)
-#   find_package(LATEX COMPONENTS PDFLATEX)
-#   find_package(LATEX COMPONENTS BIBTEX PS2PDF)
+#[=======================================================================[.rst:
+FindLATEX
+---------
+
+Find Latex
+
+This module finds an installed Latex and determines the location
+of the compiler.  Additionally the module looks for Latex-related
+software like BibTeX.
+
+This module sets the following result variables::
+
+  LATEX_FOUND:          whether found Latex and requested components
+  LATEX_<component>_FOUND:  whether found <component>
+  LATEX_COMPILER:       path to the LaTeX compiler
+  PDFLATEX_COMPILER:    path to the PdfLaTeX compiler
+  XELATEX_COMPILER:     path to the XeLaTeX compiler
+  LUALATEX_COMPILER:    path to the LuaLaTeX compiler
+  BIBTEX_COMPILER:      path to the BibTeX compiler
+  BIBER_COMPILER:       path to the Biber compiler
+  MAKEINDEX_COMPILER:   path to the MakeIndex compiler
+  XINDY_COMPILER:       path to the xindy compiler
+  DVIPS_CONVERTER:      path to the DVIPS converter
+  DVIPDF_CONVERTER:     path to the DVIPDF converter
+  PS2PDF_CONVERTER:     path to the PS2PDF converter
+  PDFTOPS_CONVERTER:    path to the pdftops converter
+  LATEX2HTML_CONVERTER: path to the LaTeX2Html converter
+  HTLATEX_COMPILER:     path to the htlatex compiler
+
+Possible components are::
+
+  PDFLATEX
+  XELATEX
+  LUALATEX
+  BIBTEX
+  BIBER
+  MAKEINDEX
+  XINDY
+  DVIPS
+  DVIPDF
+  PS2PDF
+  PDFTOPS
+  LATEX2HTML
+  HTLATEX
+
+Example Usages::
+
+  find_package(LATEX)
+  find_package(LATEX COMPONENTS PDFLATEX)
+  find_package(LATEX COMPONENTS BIBTEX PS2PDF)
+#]=======================================================================]
 
 if (WIN32)
   # Try to find the MikTex binary path (look for its package manager).
diff --git a/Modules/FindLTTngUST.cmake b/Modules/FindLTTngUST.cmake
index 00d5e7a..a074187 100644
--- a/Modules/FindLTTngUST.cmake
+++ b/Modules/FindLTTngUST.cmake
@@ -1,37 +1,38 @@
 # Distributed under the OSI-approved BSD 3-Clause License.  See accompanying
 # file Copyright.txt or https://cmake.org/licensing for details.
 
-#.rst:
-# FindLTTngUST
-# ------------
-#
-# This module finds the `LTTng-UST <http://lttng.org/>`__ library.
-#
-# Imported target
-# ^^^^^^^^^^^^^^^
-#
-# This module defines the following :prop_tgt:`IMPORTED` target:
-#
-# ``LTTng::UST``
-#   The LTTng-UST library, if found
-#
-# Result variables
-# ^^^^^^^^^^^^^^^^
-#
-# This module sets the following
-#
-# ``LTTNGUST_FOUND``
-#   ``TRUE`` if system has LTTng-UST
-# ``LTTNGUST_INCLUDE_DIRS``
-#   The LTTng-UST include directories
-# ``LTTNGUST_LIBRARIES``
-#   The libraries needed to use LTTng-UST
-# ``LTTNGUST_VERSION_STRING``
-#   The LTTng-UST version
-# ``LTTNGUST_HAS_TRACEF``
-#   ``TRUE`` if the ``tracef()`` API is available in the system's LTTng-UST
-# ``LTTNGUST_HAS_TRACELOG``
-#   ``TRUE`` if the ``tracelog()`` API is available in the system's LTTng-UST
+#[=======================================================================[.rst:
+FindLTTngUST
+------------
+
+This module finds the `LTTng-UST <http://lttng.org/>`__ library.
+
+Imported target
+^^^^^^^^^^^^^^^
+
+This module defines the following :prop_tgt:`IMPORTED` target:
+
+``LTTng::UST``
+  The LTTng-UST library, if found
+
+Result variables
+^^^^^^^^^^^^^^^^
+
+This module sets the following
+
+``LTTNGUST_FOUND``
+  ``TRUE`` if system has LTTng-UST
+``LTTNGUST_INCLUDE_DIRS``
+  The LTTng-UST include directories
+``LTTNGUST_LIBRARIES``
+  The libraries needed to use LTTng-UST
+``LTTNGUST_VERSION_STRING``
+  The LTTng-UST version
+``LTTNGUST_HAS_TRACEF``
+  ``TRUE`` if the ``tracef()`` API is available in the system's LTTng-UST
+``LTTNGUST_HAS_TRACELOG``
+  ``TRUE`` if the ``tracelog()`` API is available in the system's LTTng-UST
+#]=======================================================================]
 
 find_path(LTTNGUST_INCLUDE_DIRS NAMES lttng/tracepoint.h)
 find_library(LTTNGUST_LIBRARIES NAMES lttng-ust)
diff --git a/Modules/FindLibArchive.cmake b/Modules/FindLibArchive.cmake
index 38e512f..34fc2e2 100644
--- a/Modules/FindLibArchive.cmake
+++ b/Modules/FindLibArchive.cmake
@@ -1,20 +1,21 @@
 # Distributed under the OSI-approved BSD 3-Clause License.  See accompanying
 # file Copyright.txt or https://cmake.org/licensing for details.
 
-#.rst:
-# FindLibArchive
-# --------------
-#
-# Find libarchive library and headers
-#
-# The module defines the following variables:
-#
-# ::
-#
-#   LibArchive_FOUND        - true if libarchive was found
-#   LibArchive_INCLUDE_DIRS - include search path
-#   LibArchive_LIBRARIES    - libraries to link
-#   LibArchive_VERSION      - libarchive 3-component version number
+#[=======================================================================[.rst:
+FindLibArchive
+--------------
+
+Find libarchive library and headers
+
+The module defines the following variables:
+
+::
+
+  LibArchive_FOUND        - true if libarchive was found
+  LibArchive_INCLUDE_DIRS - include search path
+  LibArchive_LIBRARIES    - libraries to link
+  LibArchive_VERSION      - libarchive 3-component version number
+#]=======================================================================]
 
 find_path(LibArchive_INCLUDE_DIR
   NAMES archive.h
diff --git a/Modules/FindLibLZMA.cmake b/Modules/FindLibLZMA.cmake
index d203eaf..6d30e57 100644
--- a/Modules/FindLibLZMA.cmake
+++ b/Modules/FindLibLZMA.cmake
@@ -1,26 +1,27 @@
 # Distributed under the OSI-approved BSD 3-Clause License.  See accompanying
 # file Copyright.txt or https://cmake.org/licensing for details.
 
-#.rst:
-# FindLibLZMA
-# -----------
-#
-# Find LibLZMA
-#
-# Find LibLZMA headers and library
-#
-# ::
-#
-#   LIBLZMA_FOUND             - True if liblzma is found.
-#   LIBLZMA_INCLUDE_DIRS      - Directory where liblzma headers are located.
-#   LIBLZMA_LIBRARIES         - Lzma libraries to link against.
-#   LIBLZMA_HAS_AUTO_DECODER  - True if lzma_auto_decoder() is found (required).
-#   LIBLZMA_HAS_EASY_ENCODER  - True if lzma_easy_encoder() is found (required).
-#   LIBLZMA_HAS_LZMA_PRESET   - True if lzma_lzma_preset() is found (required).
-#   LIBLZMA_VERSION_MAJOR     - The major version of lzma
-#   LIBLZMA_VERSION_MINOR     - The minor version of lzma
-#   LIBLZMA_VERSION_PATCH     - The patch version of lzma
-#   LIBLZMA_VERSION_STRING    - version number as a string (ex: "5.0.3")
+#[=======================================================================[.rst:
+FindLibLZMA
+-----------
+
+Find LibLZMA
+
+Find LibLZMA headers and library
+
+::
+
+  LIBLZMA_FOUND             - True if liblzma is found.
+  LIBLZMA_INCLUDE_DIRS      - Directory where liblzma headers are located.
+  LIBLZMA_LIBRARIES         - Lzma libraries to link against.
+  LIBLZMA_HAS_AUTO_DECODER  - True if lzma_auto_decoder() is found (required).
+  LIBLZMA_HAS_EASY_ENCODER  - True if lzma_easy_encoder() is found (required).
+  LIBLZMA_HAS_LZMA_PRESET   - True if lzma_lzma_preset() is found (required).
+  LIBLZMA_VERSION_MAJOR     - The major version of lzma
+  LIBLZMA_VERSION_MINOR     - The minor version of lzma
+  LIBLZMA_VERSION_PATCH     - The patch version of lzma
+  LIBLZMA_VERSION_STRING    - version number as a string (ex: "5.0.3")
+#]=======================================================================]
 
 find_path(LIBLZMA_INCLUDE_DIR lzma.h )
 find_library(LIBLZMA_LIBRARY NAMES lzma liblzma)
diff --git a/Modules/FindLibXml2.cmake b/Modules/FindLibXml2.cmake
index 615de49..1a2af16 100644
--- a/Modules/FindLibXml2.cmake
+++ b/Modules/FindLibXml2.cmake
@@ -1,47 +1,48 @@
 # Distributed under the OSI-approved BSD 3-Clause License.  See accompanying
 # file Copyright.txt or https://cmake.org/licensing for details.
 
-#.rst:
-# FindLibXml2
-# -----------
-#
-# Find the XML processing library (libxml2).
-#
-# IMPORTED Targets
-# ^^^^^^^^^^^^^^^^
-#
-# This module defines :prop_tgt:`IMPORTED` target ``LibXml2::LibXml2``, if
-# libxml2 has been found.
-#
-# Result variables
-# ^^^^^^^^^^^^^^^^
-#
-# This module will set the following variables in your project:
-#
-# ``LIBXML2_FOUND``
-#   true if libxml2 headers and libraries were found
-# ``LIBXML2_INCLUDE_DIR``
-#   the directory containing LibXml2 headers
-# ``LIBXML2_INCLUDE_DIRS``
-#   list of the include directories needed to use LibXml2
-# ``LIBXML2_LIBRARIES``
-#   LibXml2 libraries to be linked
-# ``LIBXML2_DEFINITIONS``
-#   the compiler switches required for using LibXml2
-# ``LIBXML2_XMLLINT_EXECUTABLE``
-#   path to the XML checking tool xmllint coming with LibXml2
-# ``LIBXML2_VERSION_STRING``
-#   the version of LibXml2 found (since CMake 2.8.8)
-#
-# Cache variables
-# ^^^^^^^^^^^^^^^
-#
-# The following cache variables may also be set:
-#
-# ``LIBXML2_INCLUDE_DIR``
-#   the directory containing LibXml2 headers
-# ``LIBXML2_LIBRARY``
-#   path to the LibXml2 library
+#[=======================================================================[.rst:
+FindLibXml2
+-----------
+
+Find the XML processing library (libxml2).
+
+IMPORTED Targets
+^^^^^^^^^^^^^^^^
+
+This module defines :prop_tgt:`IMPORTED` target ``LibXml2::LibXml2``, if
+libxml2 has been found.
+
+Result variables
+^^^^^^^^^^^^^^^^
+
+This module will set the following variables in your project:
+
+``LIBXML2_FOUND``
+  true if libxml2 headers and libraries were found
+``LIBXML2_INCLUDE_DIR``
+  the directory containing LibXml2 headers
+``LIBXML2_INCLUDE_DIRS``
+  list of the include directories needed to use LibXml2
+``LIBXML2_LIBRARIES``
+  LibXml2 libraries to be linked
+``LIBXML2_DEFINITIONS``
+  the compiler switches required for using LibXml2
+``LIBXML2_XMLLINT_EXECUTABLE``
+  path to the XML checking tool xmllint coming with LibXml2
+``LIBXML2_VERSION_STRING``
+  the version of LibXml2 found (since CMake 2.8.8)
+
+Cache variables
+^^^^^^^^^^^^^^^
+
+The following cache variables may also be set:
+
+``LIBXML2_INCLUDE_DIR``
+  the directory containing LibXml2 headers
+``LIBXML2_LIBRARY``
+  path to the LibXml2 library
+#]=======================================================================]
 
 # use pkg-config to get the directories and then use these values
 # in the find_path() and find_library() calls
diff --git a/Modules/FindLibXslt.cmake b/Modules/FindLibXslt.cmake
index abd1963..4cca64f 100644
--- a/Modules/FindLibXslt.cmake
+++ b/Modules/FindLibXslt.cmake
@@ -1,29 +1,30 @@
 # Distributed under the OSI-approved BSD 3-Clause License.  See accompanying
 # file Copyright.txt or https://cmake.org/licensing for details.
 
-#.rst:
-# FindLibXslt
-# -----------
-#
-# Try to find the LibXslt library
-#
-# Once done this will define
-#
-# ::
-#
-#   LIBXSLT_FOUND - system has LibXslt
-#   LIBXSLT_INCLUDE_DIR - the LibXslt include directory
-#   LIBXSLT_LIBRARIES - Link these to LibXslt
-#   LIBXSLT_DEFINITIONS - Compiler switches required for using LibXslt
-#   LIBXSLT_VERSION_STRING - version of LibXslt found (since CMake 2.8.8)
-#
-# Additionally, the following two variables are set (but not required
-# for using xslt):
-#
-# ``LIBXSLT_EXSLT_LIBRARIES``
-#   Link to these if you need to link against the exslt library.
-# ``LIBXSLT_XSLTPROC_EXECUTABLE``
-#   Contains the full path to the xsltproc executable if found.
+#[=======================================================================[.rst:
+FindLibXslt
+-----------
+
+Try to find the LibXslt library
+
+Once done this will define
+
+::
+
+  LIBXSLT_FOUND - system has LibXslt
+  LIBXSLT_INCLUDE_DIR - the LibXslt include directory
+  LIBXSLT_LIBRARIES - Link these to LibXslt
+  LIBXSLT_DEFINITIONS - Compiler switches required for using LibXslt
+  LIBXSLT_VERSION_STRING - version of LibXslt found (since CMake 2.8.8)
+
+Additionally, the following two variables are set (but not required
+for using xslt):
+
+``LIBXSLT_EXSLT_LIBRARIES``
+  Link to these if you need to link against the exslt library.
+``LIBXSLT_XSLTPROC_EXECUTABLE``
+  Contains the full path to the xsltproc executable if found.
+#]=======================================================================]
 
 # use pkg-config to get the directories and then use these values
 # in the find_path() and find_library() calls
diff --git a/Modules/FindLua.cmake b/Modules/FindLua.cmake
index 68530b3..eb3b5fb 100644
--- a/Modules/FindLua.cmake
+++ b/Modules/FindLua.cmake
@@ -1,40 +1,41 @@
 # Distributed under the OSI-approved BSD 3-Clause License.  See accompanying
 # file Copyright.txt or https://cmake.org/licensing for details.
 
-#.rst:
-# FindLua
-# -------
-#
-#
-#
-# Locate Lua library This module defines
-#
-# ::
-#
-#   LUA_FOUND          - if false, do not try to link to Lua
-#   LUA_LIBRARIES      - both lua and lualib
-#   LUA_INCLUDE_DIR    - where to find lua.h
-#   LUA_VERSION_STRING - the version of Lua found
-#   LUA_VERSION_MAJOR  - the major version of Lua
-#   LUA_VERSION_MINOR  - the minor version of Lua
-#   LUA_VERSION_PATCH  - the patch version of Lua
-#
-#
-#
-# Note that the expected include convention is
-#
-# ::
-#
-#   #include "lua.h"
-#
-# and not
-#
-# ::
-#
-#   #include <lua/lua.h>
-#
-# This is because, the lua location is not standardized and may exist in
-# locations other than lua/
+#[=======================================================================[.rst:
+FindLua
+-------
+
+
+
+Locate Lua library This module defines
+
+::
+
+  LUA_FOUND          - if false, do not try to link to Lua
+  LUA_LIBRARIES      - both lua and lualib
+  LUA_INCLUDE_DIR    - where to find lua.h
+  LUA_VERSION_STRING - the version of Lua found
+  LUA_VERSION_MAJOR  - the major version of Lua
+  LUA_VERSION_MINOR  - the minor version of Lua
+  LUA_VERSION_PATCH  - the patch version of Lua
+
+
+
+Note that the expected include convention is
+
+::
+
+  #include "lua.h"
+
+and not
+
+::
+
+  #include <lua/lua.h>
+
+This is because, the lua location is not standardized and may exist in
+locations other than lua/
+#]=======================================================================]
 
 cmake_policy(PUSH)  # Policies apply to functions at definition-time
 cmake_policy(SET CMP0012 NEW)  # For while(TRUE)
diff --git a/Modules/FindLua50.cmake b/Modules/FindLua50.cmake
index 315f301..aafc056 100644
--- a/Modules/FindLua50.cmake
+++ b/Modules/FindLua50.cmake
@@ -1,36 +1,37 @@
 # Distributed under the OSI-approved BSD 3-Clause License.  See accompanying
 # file Copyright.txt or https://cmake.org/licensing for details.
 
-#.rst:
-# FindLua50
-# ---------
-#
-#
-#
-# Locate Lua library This module defines
-#
-# ::
-#
-#   LUA50_FOUND, if false, do not try to link to Lua
-#   LUA_LIBRARIES, both lua and lualib
-#   LUA_INCLUDE_DIR, where to find lua.h and lualib.h (and probably lauxlib.h)
-#
-#
-#
-# Note that the expected include convention is
-#
-# ::
-#
-#   #include "lua.h"
-#
-# and not
-#
-# ::
-#
-#   #include <lua/lua.h>
-#
-# This is because, the lua location is not standardized and may exist in
-# locations other than lua/
+#[=======================================================================[.rst:
+FindLua50
+---------
+
+
+
+Locate Lua library This module defines
+
+::
+
+  LUA50_FOUND, if false, do not try to link to Lua
+  LUA_LIBRARIES, both lua and lualib
+  LUA_INCLUDE_DIR, where to find lua.h and lualib.h (and probably lauxlib.h)
+
+
+
+Note that the expected include convention is
+
+::
+
+  #include "lua.h"
+
+and not
+
+::
+
+  #include <lua/lua.h>
+
+This is because, the lua location is not standardized and may exist in
+locations other than lua/
+#]=======================================================================]
 
 find_path(LUA_INCLUDE_DIR lua.h
   HINTS
diff --git a/Modules/FindLua51.cmake b/Modules/FindLua51.cmake
index f2b2322..31eaf87 100644
--- a/Modules/FindLua51.cmake
+++ b/Modules/FindLua51.cmake
@@ -1,37 +1,38 @@
 # Distributed under the OSI-approved BSD 3-Clause License.  See accompanying
 # file Copyright.txt or https://cmake.org/licensing for details.
 
-#.rst:
-# FindLua51
-# ---------
-#
-#
-#
-# Locate Lua library This module defines
-#
-# ::
-#
-#   LUA51_FOUND, if false, do not try to link to Lua
-#   LUA_LIBRARIES
-#   LUA_INCLUDE_DIR, where to find lua.h
-#   LUA_VERSION_STRING, the version of Lua found (since CMake 2.8.8)
-#
-#
-#
-# Note that the expected include convention is
-#
-# ::
-#
-#   #include "lua.h"
-#
-# and not
-#
-# ::
-#
-#   #include <lua/lua.h>
-#
-# This is because, the lua location is not standardized and may exist in
-# locations other than lua/
+#[=======================================================================[.rst:
+FindLua51
+---------
+
+
+
+Locate Lua library This module defines
+
+::
+
+  LUA51_FOUND, if false, do not try to link to Lua
+  LUA_LIBRARIES
+  LUA_INCLUDE_DIR, where to find lua.h
+  LUA_VERSION_STRING, the version of Lua found (since CMake 2.8.8)
+
+
+
+Note that the expected include convention is
+
+::
+
+  #include "lua.h"
+
+and not
+
+::
+
+  #include <lua/lua.h>
+
+This is because, the lua location is not standardized and may exist in
+locations other than lua/
+#]=======================================================================]
 
 find_path(LUA_INCLUDE_DIR lua.h
   HINTS
diff --git a/Modules/FindMFC.cmake b/Modules/FindMFC.cmake
index 3baaf32..9738ac5 100644
--- a/Modules/FindMFC.cmake
+++ b/Modules/FindMFC.cmake
@@ -1,20 +1,21 @@
 # Distributed under the OSI-approved BSD 3-Clause License.  See accompanying
 # file Copyright.txt or https://cmake.org/licensing for details.
 
-#.rst:
-# FindMFC
-# -------
-#
-# Find MFC on Windows
-#
-# Find the native MFC - i.e.  decide if an application can link to the
-# MFC libraries.
-#
-# ::
-#
-#   MFC_FOUND - Was MFC support found
-#
-# You don't need to include anything or link anything to use it.
+#[=======================================================================[.rst:
+FindMFC
+-------
+
+Find MFC on Windows
+
+Find the native MFC - i.e.  decide if an application can link to the
+MFC libraries.
+
+::
+
+  MFC_FOUND - Was MFC support found
+
+You don't need to include anything or link anything to use it.
+#]=======================================================================]
 
 # Assume no MFC support
 set(MFC_FOUND "NO")
diff --git a/Modules/FindMPEG.cmake b/Modules/FindMPEG.cmake
index 850a57e..e5a80e3 100644
--- a/Modules/FindMPEG.cmake
+++ b/Modules/FindMPEG.cmake
@@ -1,26 +1,27 @@
 # Distributed under the OSI-approved BSD 3-Clause License.  See accompanying
 # file Copyright.txt or https://cmake.org/licensing for details.
 
-#.rst:
-# FindMPEG
-# --------
-#
-# Find the native MPEG includes and library
-#
-# This module defines
-#
-# ::
-#
-#   MPEG_INCLUDE_DIR, where to find MPEG.h, etc.
-#   MPEG_LIBRARIES, the libraries required to use MPEG.
-#   MPEG_FOUND, If false, do not try to use MPEG.
-#
-# also defined, but not for general use are
-#
-# ::
-#
-#   MPEG_mpeg2_LIBRARY, where to find the MPEG library.
-#   MPEG_vo_LIBRARY, where to find the vo library.
+#[=======================================================================[.rst:
+FindMPEG
+--------
+
+Find the native MPEG includes and library
+
+This module defines
+
+::
+
+  MPEG_INCLUDE_DIR, where to find MPEG.h, etc.
+  MPEG_LIBRARIES, the libraries required to use MPEG.
+  MPEG_FOUND, If false, do not try to use MPEG.
+
+also defined, but not for general use are
+
+::
+
+  MPEG_mpeg2_LIBRARY, where to find the MPEG library.
+  MPEG_vo_LIBRARY, where to find the vo library.
+#]=======================================================================]
 
 find_path(MPEG_INCLUDE_DIR
   NAMES mpeg2.h mpeg2dec/mpeg2.h mpeg2dec/include/video_out.h)
diff --git a/Modules/FindMPEG2.cmake b/Modules/FindMPEG2.cmake
index f9ccd6a..763d86a 100644
--- a/Modules/FindMPEG2.cmake
+++ b/Modules/FindMPEG2.cmake
@@ -1,26 +1,27 @@
 # Distributed under the OSI-approved BSD 3-Clause License.  See accompanying
 # file Copyright.txt or https://cmake.org/licensing for details.
 
-#.rst:
-# FindMPEG2
-# ---------
-#
-# Find the native MPEG2 includes and library
-#
-# This module defines
-#
-# ::
-#
-#   MPEG2_INCLUDE_DIR, path to mpeg2dec/mpeg2.h, etc.
-#   MPEG2_LIBRARIES, the libraries required to use MPEG2.
-#   MPEG2_FOUND, If false, do not try to use MPEG2.
-#
-# also defined, but not for general use are
-#
-# ::
-#
-#   MPEG2_mpeg2_LIBRARY, where to find the MPEG2 library.
-#   MPEG2_vo_LIBRARY, where to find the vo library.
+#[=======================================================================[.rst:
+FindMPEG2
+---------
+
+Find the native MPEG2 includes and library
+
+This module defines
+
+::
+
+  MPEG2_INCLUDE_DIR, path to mpeg2dec/mpeg2.h, etc.
+  MPEG2_LIBRARIES, the libraries required to use MPEG2.
+  MPEG2_FOUND, If false, do not try to use MPEG2.
+
+also defined, but not for general use are
+
+::
+
+  MPEG2_mpeg2_LIBRARY, where to find the MPEG2 library.
+  MPEG2_vo_LIBRARY, where to find the vo library.
+#]=======================================================================]
 
 find_path(MPEG2_INCLUDE_DIR
   NAMES mpeg2.h mpeg2dec/mpeg2.h)
diff --git a/Modules/FindMPI.cmake b/Modules/FindMPI.cmake
index bfcd876..90c5592 100644
--- a/Modules/FindMPI.cmake
+++ b/Modules/FindMPI.cmake
@@ -1,247 +1,248 @@
 # Distributed under the OSI-approved BSD 3-Clause License.  See accompanying
 # file Copyright.txt or https://cmake.org/licensing for details.
 
-#.rst:
-# FindMPI
-# -------
-#
-# Find a Message Passing Interface (MPI) implementation.
-#
-# The Message Passing Interface (MPI) is a library used to write
-# high-performance distributed-memory parallel applications, and is
-# typically deployed on a cluster.  MPI is a standard interface (defined
-# by the MPI forum) for which many implementations are available.
-#
-# Variables for using MPI
-# ^^^^^^^^^^^^^^^^^^^^^^^
-#
-# The module exposes the components ``C``, ``CXX``, ``MPICXX`` and ``Fortran``.
-# Each of these controls the various MPI languages to search for.
-# The difference between ``CXX`` and ``MPICXX`` is that ``CXX`` refers to the
-# MPI C API being usable from C++, whereas ``MPICXX`` refers to the MPI-2 C++ API
-# that was removed again in MPI-3.
-#
-# Depending on the enabled components the following variables will be set:
-#
-# ``MPI_FOUND``
-#   Variable indicating that MPI settings for all requested languages have been found.
-#   If no components are specified, this is true if MPI settings for all enabled languages
-#   were detected. Note that the ``MPICXX`` component does not affect this variable.
-# ``MPI_VERSION``
-#   Minimal version of MPI detected among the requested languages, or all enabled languages
-#   if no components were specified.
-#
-# This module will set the following variables per language in your
-# project, where ``<lang>`` is one of C, CXX, or Fortran:
-#
-# ``MPI_<lang>_FOUND``
-#   Variable indicating the MPI settings for ``<lang>`` were found and that
-#   simple MPI test programs compile with the provided settings.
-# ``MPI_<lang>_COMPILER``
-#   MPI compiler for ``<lang>`` if such a program exists.
-# ``MPI_<lang>_COMPILE_OPTIONS``
-#   Compilation options for MPI programs in ``<lang>``, given as a :ref:`;-list <CMake Language Lists>`.
-# ``MPI_<lang>_COMPILE_DEFINITIONS``
-#   Compilation definitions for MPI programs in ``<lang>``, given as a :ref:`;-list <CMake Language Lists>`.
-# ``MPI_<lang>_INCLUDE_DIRS``
-#   Include path(s) for MPI header.
-# ``MPI_<lang>_LINK_FLAGS``
-#   Linker flags for MPI programs.
-# ``MPI_<lang>_LIBRARIES``
-#   All libraries to link MPI programs against.
-#
-# Additionally, the following :prop_tgt:`IMPORTED` targets are defined:
-#
-# ``MPI::MPI_<lang>``
-#   Target for using MPI from ``<lang>``.
-#
-# The following variables indicating which bindings are present will be defined:
-#
-# ``MPI_MPICXX_FOUND``
-#   Variable indicating whether the MPI-2 C++ bindings are present (introduced in MPI-2, removed with MPI-3).
-# ``MPI_Fortran_HAVE_F77_HEADER``
-#   True if the Fortran 77 header ``mpif.h`` is available.
-# ``MPI_Fortran_HAVE_F90_MODULE``
-#   True if the Fortran 90 module ``mpi`` can be used for accessing MPI (MPI-2 and higher only).
-# ``MPI_Fortran_HAVE_F08_MODULE``
-#   True if the Fortran 2008 ``mpi_f08`` is available to MPI programs (MPI-3 and higher only).
-#
-# If possible, the MPI version will be determined by this module. The facilities to detect the MPI version
-# were introduced with MPI-1.2, and therefore cannot be found for older MPI versions.
-#
-# ``MPI_<lang>_VERSION_MAJOR``
-#   Major version of MPI implemented for ``<lang>`` by the MPI distribution.
-# ``MPI_<lang>_VERSION_MINOR``
-#   Minor version of MPI implemented for ``<lang>`` by the MPI distribution.
-# ``MPI_<lang>_VERSION``
-#   MPI version implemented for ``<lang>`` by the MPI distribution.
-#
-# Note that there's no variable for the C bindings being accessible through ``mpi.h``, since the MPI standards
-# always have required this binding to work in both C and C++ code.
-#
-# For running MPI programs, the module sets the following variables
-#
-# ``MPIEXEC_EXECUTABLE``
-#   Executable for running MPI programs, if such exists.
-# ``MPIEXEC_NUMPROC_FLAG``
-#   Flag to pass to ``mpiexec`` before giving it the number of processors to run on.
-# ``MPIEXEC_MAX_NUMPROCS``
-#   Number of MPI processors to utilize. Defaults to the number
-#   of processors detected on the host system.
-# ``MPIEXEC_PREFLAGS``
-#   Flags to pass to ``mpiexec`` directly before the executable to run.
-# ``MPIEXEC_POSTFLAGS``
-#   Flags to pass to ``mpiexec`` after other flags.
-#
-# Variables for locating MPI
-# ^^^^^^^^^^^^^^^^^^^^^^^^^^
-#
-# This module performs a three step search for an MPI implementation:
-#
-# 1. Check if the compiler has MPI support built-in. This is the case if the user passed a
-#    compiler wrapper as ``CMAKE_<LANG>_COMPILER`` or if they're on a Cray system.
-# 2. Attempt to find an MPI compiler wrapper and determine the compiler information from it.
-# 3. Try to find an MPI implementation that does not ship such a wrapper by guessing settings.
-#    Currently, only Microsoft MPI and MPICH2 on Windows are supported.
-#
-# For controlling the second step, the following variables may be set:
-#
-# ``MPI_<lang>_COMPILER``
-#   Search for the specified compiler wrapper and use it.
-# ``MPI_<lang>_COMPILER_FLAGS``
-#   Flags to pass to the MPI compiler wrapper during interrogation. Some compiler wrappers
-#   support linking debug or tracing libraries if a specific flag is passed and this variable
-#   may be used to obtain them.
-# ``MPI_COMPILER_FLAGS``
-#   Used to initialize ``MPI_<lang>_COMPILER_FLAGS`` if no language specific flag has been given.
-#   Empty by default.
-# ``MPI_EXECUTABLE_SUFFIX``
-#   A suffix which is appended to all names that are being looked for. For instance you may set this
-#   to ``.mpich`` or ``.openmpi`` to prefer the one or the other on Debian and its derivatives.
-#
-# In order to control the guessing step, the following variable may be set:
-#
-# ``MPI_GUESS_LIBRARY_NAME``
-#   Valid values are ``MSMPI`` and ``MPICH2``. If set, only the given library will be searched for.
-#   By default, ``MSMPI`` will be preferred over ``MPICH2`` if both are available.
-#   This also sets ``MPI_SKIP_COMPILER_WRAPPER`` to ``true``, which may be overridden.
-#
-# Each of the search steps may be skipped with the following control variables:
-#
-# ``MPI_ASSUME_NO_BUILTIN_MPI``
-#   If true, the module assumes that the compiler itself does not provide an MPI implementation and
-#   skips to step 2.
-# ``MPI_SKIP_COMPILER_WRAPPER``
-#   If true, no compiler wrapper will be searched for.
-# ``MPI_SKIP_GUESSING``
-#   If true, the guessing step will be skipped.
-#
-# Additionally, the following control variable is available to change search behavior:
-#
-# ``MPI_CXX_SKIP_MPICXX``
-#   Add some definitions that will disable the MPI-2 C++ bindings.
-#   Currently supported are MPICH, Open MPI, Platform MPI and derivatives thereof,
-#   for example MVAPICH or Intel MPI.
-#
-# If the find procedure fails for a variable ``MPI_<lang>_WORKS``, then the settings detected by or passed to
-# the module did not work and even a simple MPI test program failed to compile.
-#
-# If all of these parameters were not sufficient to find the right MPI implementation, a user may
-# disable the entire autodetection process by specifying both a list of libraries in ``MPI_<lang>_LIBRARIES``
-# and a list of include directories in ``MPI_<lang>_ADDITIONAL_INCLUDE_DIRS``.
-# Any other variable may be set in addition to these two. The module will then validate the MPI settings and store the
-# settings in the cache.
-#
-# Cache variables for MPI
-# ^^^^^^^^^^^^^^^^^^^^^^^
-#
-# The variable ``MPI_<lang>_INCLUDE_DIRS`` will be assembled from the following variables.
-# For C and CXX:
-#
-# ``MPI_<lang>_HEADER_DIR``
-#   Location of the ``mpi.h`` header on disk.
-#
-# For Fortran:
-#
-# ``MPI_Fortran_F77_HEADER_DIR``
-#   Location of the Fortran 77 header ``mpif.h``, if it exists.
-# ``MPI_Fortran_MODULE_DIR``
-#   Location of the ``mpi`` or ``mpi_f08`` modules, if available.
-#
-# For all languages the following variables are additionally considered:
-#
-# ``MPI_<lang>_ADDITIONAL_INCLUDE_DIRS``
-#   A :ref:`;-list <CMake Language Lists>` of paths needed in addition to the normal include directories.
-# ``MPI_<include_name>_INCLUDE_DIR``
-#   Path variables for include folders referred to by ``<include_name>``.
-# ``MPI_<lang>_ADDITIONAL_INCLUDE_VARS``
-#   A :ref:`;-list <CMake Language Lists>` of ``<include_name>`` that will be added to the include locations of ``<lang>``.
-#
-# The variable ``MPI_<lang>_LIBRARIES`` will be assembled from the following variables:
-#
-# ``MPI_<lib_name>_LIBRARY``
-#   The location of a library called ``<lib_name>`` for use with MPI.
-# ``MPI_<lang>_LIB_NAMES``
-#   A :ref:`;-list <CMake Language Lists>` of ``<lib_name>`` that will be added to the include locations of ``<lang>``.
-#
-# Usage of mpiexec
-# ^^^^^^^^^^^^^^^^
-#
-# When using ``MPIEXEC_EXECUTABLE`` to execute MPI applications, you should typically
-# use all of the ``MPIEXEC_EXECUTABLE`` flags as follows:
-#
-# ::
-#
-#    ${MPIEXEC_EXECUTABLE} ${MPIEXEC_NUMPROC_FLAG} ${MPIEXEC_MAX_NUMPROCS}
-#      ${MPIEXEC_PREFLAGS} EXECUTABLE ${MPIEXEC_POSTFLAGS} ARGS
-#
-# where ``EXECUTABLE`` is the MPI program, and ``ARGS`` are the arguments to
-# pass to the MPI program.
-#
-# Advanced variables for using MPI
-# ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
-#
-# The module can perform some advanced feature detections upon explicit request.
-#
-# **Important notice:** The following checks cannot be performed without *executing* an MPI test program.
-# Consider the special considerations for the behavior of :command:`try_run` during cross compilation.
-# Moreover, running an MPI program can cause additional issues, like a firewall notification on some systems.
-# You should only enable these detections if you absolutely need the information.
-#
-# If the following variables are set to true, the respective search will be performed:
-#
-# ``MPI_DETERMINE_Fortran_CAPABILITIES``
-#   Determine for all available Fortran bindings what the values of ``MPI_SUBARRAYS_SUPPORTED`` and
-#   ``MPI_ASYNC_PROTECTS_NONBLOCKING`` are and make their values available as ``MPI_Fortran_<binding>_SUBARRAYS``
-#   and ``MPI_Fortran_<binding>_ASYNCPROT``, where ``<binding>`` is one of ``F77_HEADER``, ``F90_MODULE`` and
-#   ``F08_MODULE``.
-# ``MPI_DETERMINE_LIBRARY_VERSION``
-#   For each language, find the output of ``MPI_Get_library_version`` and make it available as ``MPI_<lang>_LIBRARY_VERSION``.
-#   This information is usually tied to the runtime component of an MPI implementation and might differ depending on ``<lang>``.
-#   Note that the return value is entirely implementation defined. This information might be used to identify
-#   the MPI vendor and for example pick the correct one of multiple third party binaries that matches the MPI vendor.
-#
-# Backward Compatibility
-# ^^^^^^^^^^^^^^^^^^^^^^
-#
-# For backward compatibility with older versions of FindMPI, these
-# variables are set, but deprecated:
-#
-# ::
-#
-#    MPI_COMPILER        MPI_LIBRARY        MPI_EXTRA_LIBRARY
-#    MPI_COMPILE_FLAGS   MPI_INCLUDE_PATH   MPI_LINK_FLAGS
-#    MPI_LIBRARIES
-#
-# In new projects, please use the ``MPI_<lang>_XXX`` equivalents.
-# Additionally, the following variables are deprecated:
-#
-# ``MPI_<lang>_COMPILE_FLAGS``
-#   Use ``MPI_<lang>_COMPILE_OPTIONS`` and ``MPI_<lang>_COMPILE_DEFINITIONS`` instead.
-# ``MPI_<lang>_INCLUDE_PATH``
-#   For consumption use ``MPI_<lang>_INCLUDE_DIRS`` and for specifying folders use ``MPI_<lang>_ADDITIONAL_INCLUDE_DIRS`` instead.
-# ``MPIEXEC``
-#   Use ``MPIEXEC_EXECUTABLE`` instead.
+#[=======================================================================[.rst:
+FindMPI
+-------
+
+Find a Message Passing Interface (MPI) implementation.
+
+The Message Passing Interface (MPI) is a library used to write
+high-performance distributed-memory parallel applications, and is
+typically deployed on a cluster.  MPI is a standard interface (defined
+by the MPI forum) for which many implementations are available.
+
+Variables for using MPI
+^^^^^^^^^^^^^^^^^^^^^^^
+
+The module exposes the components ``C``, ``CXX``, ``MPICXX`` and ``Fortran``.
+Each of these controls the various MPI languages to search for.
+The difference between ``CXX`` and ``MPICXX`` is that ``CXX`` refers to the
+MPI C API being usable from C++, whereas ``MPICXX`` refers to the MPI-2 C++ API
+that was removed again in MPI-3.
+
+Depending on the enabled components the following variables will be set:
+
+``MPI_FOUND``
+  Variable indicating that MPI settings for all requested languages have been found.
+  If no components are specified, this is true if MPI settings for all enabled languages
+  were detected. Note that the ``MPICXX`` component does not affect this variable.
+``MPI_VERSION``
+  Minimal version of MPI detected among the requested languages, or all enabled languages
+  if no components were specified.
+
+This module will set the following variables per language in your
+project, where ``<lang>`` is one of C, CXX, or Fortran:
+
+``MPI_<lang>_FOUND``
+  Variable indicating the MPI settings for ``<lang>`` were found and that
+  simple MPI test programs compile with the provided settings.
+``MPI_<lang>_COMPILER``
+  MPI compiler for ``<lang>`` if such a program exists.
+``MPI_<lang>_COMPILE_OPTIONS``
+  Compilation options for MPI programs in ``<lang>``, given as a :ref:`;-list <CMake Language Lists>`.
+``MPI_<lang>_COMPILE_DEFINITIONS``
+  Compilation definitions for MPI programs in ``<lang>``, given as a :ref:`;-list <CMake Language Lists>`.
+``MPI_<lang>_INCLUDE_DIRS``
+  Include path(s) for MPI header.
+``MPI_<lang>_LINK_FLAGS``
+  Linker flags for MPI programs.
+``MPI_<lang>_LIBRARIES``
+  All libraries to link MPI programs against.
+
+Additionally, the following :prop_tgt:`IMPORTED` targets are defined:
+
+``MPI::MPI_<lang>``
+  Target for using MPI from ``<lang>``.
+
+The following variables indicating which bindings are present will be defined:
+
+``MPI_MPICXX_FOUND``
+  Variable indicating whether the MPI-2 C++ bindings are present (introduced in MPI-2, removed with MPI-3).
+``MPI_Fortran_HAVE_F77_HEADER``
+  True if the Fortran 77 header ``mpif.h`` is available.
+``MPI_Fortran_HAVE_F90_MODULE``
+  True if the Fortran 90 module ``mpi`` can be used for accessing MPI (MPI-2 and higher only).
+``MPI_Fortran_HAVE_F08_MODULE``
+  True if the Fortran 2008 ``mpi_f08`` is available to MPI programs (MPI-3 and higher only).
+
+If possible, the MPI version will be determined by this module. The facilities to detect the MPI version
+were introduced with MPI-1.2, and therefore cannot be found for older MPI versions.
+
+``MPI_<lang>_VERSION_MAJOR``
+  Major version of MPI implemented for ``<lang>`` by the MPI distribution.
+``MPI_<lang>_VERSION_MINOR``
+  Minor version of MPI implemented for ``<lang>`` by the MPI distribution.
+``MPI_<lang>_VERSION``
+  MPI version implemented for ``<lang>`` by the MPI distribution.
+
+Note that there's no variable for the C bindings being accessible through ``mpi.h``, since the MPI standards
+always have required this binding to work in both C and C++ code.
+
+For running MPI programs, the module sets the following variables
+
+``MPIEXEC_EXECUTABLE``
+  Executable for running MPI programs, if such exists.
+``MPIEXEC_NUMPROC_FLAG``
+  Flag to pass to ``mpiexec`` before giving it the number of processors to run on.
+``MPIEXEC_MAX_NUMPROCS``
+  Number of MPI processors to utilize. Defaults to the number
+  of processors detected on the host system.
+``MPIEXEC_PREFLAGS``
+  Flags to pass to ``mpiexec`` directly before the executable to run.
+``MPIEXEC_POSTFLAGS``
+  Flags to pass to ``mpiexec`` after other flags.
+
+Variables for locating MPI
+^^^^^^^^^^^^^^^^^^^^^^^^^^
+
+This module performs a three step search for an MPI implementation:
+
+1. Check if the compiler has MPI support built-in. This is the case if the user passed a
+   compiler wrapper as ``CMAKE_<LANG>_COMPILER`` or if they're on a Cray system.
+2. Attempt to find an MPI compiler wrapper and determine the compiler information from it.
+3. Try to find an MPI implementation that does not ship such a wrapper by guessing settings.
+   Currently, only Microsoft MPI and MPICH2 on Windows are supported.
+
+For controlling the second step, the following variables may be set:
+
+``MPI_<lang>_COMPILER``
+  Search for the specified compiler wrapper and use it.
+``MPI_<lang>_COMPILER_FLAGS``
+  Flags to pass to the MPI compiler wrapper during interrogation. Some compiler wrappers
+  support linking debug or tracing libraries if a specific flag is passed and this variable
+  may be used to obtain them.
+``MPI_COMPILER_FLAGS``
+  Used to initialize ``MPI_<lang>_COMPILER_FLAGS`` if no language specific flag has been given.
+  Empty by default.
+``MPI_EXECUTABLE_SUFFIX``
+  A suffix which is appended to all names that are being looked for. For instance you may set this
+  to ``.mpich`` or ``.openmpi`` to prefer the one or the other on Debian and its derivatives.
+
+In order to control the guessing step, the following variable may be set:
+
+``MPI_GUESS_LIBRARY_NAME``
+  Valid values are ``MSMPI`` and ``MPICH2``. If set, only the given library will be searched for.
+  By default, ``MSMPI`` will be preferred over ``MPICH2`` if both are available.
+  This also sets ``MPI_SKIP_COMPILER_WRAPPER`` to ``true``, which may be overridden.
+
+Each of the search steps may be skipped with the following control variables:
+
+``MPI_ASSUME_NO_BUILTIN_MPI``
+  If true, the module assumes that the compiler itself does not provide an MPI implementation and
+  skips to step 2.
+``MPI_SKIP_COMPILER_WRAPPER``
+  If true, no compiler wrapper will be searched for.
+``MPI_SKIP_GUESSING``
+  If true, the guessing step will be skipped.
+
+Additionally, the following control variable is available to change search behavior:
+
+``MPI_CXX_SKIP_MPICXX``
+  Add some definitions that will disable the MPI-2 C++ bindings.
+  Currently supported are MPICH, Open MPI, Platform MPI and derivatives thereof,
+  for example MVAPICH or Intel MPI.
+
+If the find procedure fails for a variable ``MPI_<lang>_WORKS``, then the settings detected by or passed to
+the module did not work and even a simple MPI test program failed to compile.
+
+If all of these parameters were not sufficient to find the right MPI implementation, a user may
+disable the entire autodetection process by specifying both a list of libraries in ``MPI_<lang>_LIBRARIES``
+and a list of include directories in ``MPI_<lang>_ADDITIONAL_INCLUDE_DIRS``.
+Any other variable may be set in addition to these two. The module will then validate the MPI settings and store the
+settings in the cache.
+
+Cache variables for MPI
+^^^^^^^^^^^^^^^^^^^^^^^
+
+The variable ``MPI_<lang>_INCLUDE_DIRS`` will be assembled from the following variables.
+For C and CXX:
+
+``MPI_<lang>_HEADER_DIR``
+  Location of the ``mpi.h`` header on disk.
+
+For Fortran:
+
+``MPI_Fortran_F77_HEADER_DIR``
+  Location of the Fortran 77 header ``mpif.h``, if it exists.
+``MPI_Fortran_MODULE_DIR``
+  Location of the ``mpi`` or ``mpi_f08`` modules, if available.
+
+For all languages the following variables are additionally considered:
+
+``MPI_<lang>_ADDITIONAL_INCLUDE_DIRS``
+  A :ref:`;-list <CMake Language Lists>` of paths needed in addition to the normal include directories.
+``MPI_<include_name>_INCLUDE_DIR``
+  Path variables for include folders referred to by ``<include_name>``.
+``MPI_<lang>_ADDITIONAL_INCLUDE_VARS``
+  A :ref:`;-list <CMake Language Lists>` of ``<include_name>`` that will be added to the include locations of ``<lang>``.
+
+The variable ``MPI_<lang>_LIBRARIES`` will be assembled from the following variables:
+
+``MPI_<lib_name>_LIBRARY``
+  The location of a library called ``<lib_name>`` for use with MPI.
+``MPI_<lang>_LIB_NAMES``
+  A :ref:`;-list <CMake Language Lists>` of ``<lib_name>`` that will be added to the include locations of ``<lang>``.
+
+Usage of mpiexec
+^^^^^^^^^^^^^^^^
+
+When using ``MPIEXEC_EXECUTABLE`` to execute MPI applications, you should typically
+use all of the ``MPIEXEC_EXECUTABLE`` flags as follows:
+
+::
+
+   ${MPIEXEC_EXECUTABLE} ${MPIEXEC_NUMPROC_FLAG} ${MPIEXEC_MAX_NUMPROCS}
+     ${MPIEXEC_PREFLAGS} EXECUTABLE ${MPIEXEC_POSTFLAGS} ARGS
+
+where ``EXECUTABLE`` is the MPI program, and ``ARGS`` are the arguments to
+pass to the MPI program.
+
+Advanced variables for using MPI
+^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
+
+The module can perform some advanced feature detections upon explicit request.
+
+**Important notice:** The following checks cannot be performed without *executing* an MPI test program.
+Consider the special considerations for the behavior of :command:`try_run` during cross compilation.
+Moreover, running an MPI program can cause additional issues, like a firewall notification on some systems.
+You should only enable these detections if you absolutely need the information.
+
+If the following variables are set to true, the respective search will be performed:
+
+``MPI_DETERMINE_Fortran_CAPABILITIES``
+  Determine for all available Fortran bindings what the values of ``MPI_SUBARRAYS_SUPPORTED`` and
+  ``MPI_ASYNC_PROTECTS_NONBLOCKING`` are and make their values available as ``MPI_Fortran_<binding>_SUBARRAYS``
+  and ``MPI_Fortran_<binding>_ASYNCPROT``, where ``<binding>`` is one of ``F77_HEADER``, ``F90_MODULE`` and
+  ``F08_MODULE``.
+``MPI_DETERMINE_LIBRARY_VERSION``
+  For each language, find the output of ``MPI_Get_library_version`` and make it available as ``MPI_<lang>_LIBRARY_VERSION``.
+  This information is usually tied to the runtime component of an MPI implementation and might differ depending on ``<lang>``.
+  Note that the return value is entirely implementation defined. This information might be used to identify
+  the MPI vendor and for example pick the correct one of multiple third party binaries that matches the MPI vendor.
+
+Backward Compatibility
+^^^^^^^^^^^^^^^^^^^^^^
+
+For backward compatibility with older versions of FindMPI, these
+variables are set, but deprecated:
+
+::
+
+   MPI_COMPILER        MPI_LIBRARY        MPI_EXTRA_LIBRARY
+   MPI_COMPILE_FLAGS   MPI_INCLUDE_PATH   MPI_LINK_FLAGS
+   MPI_LIBRARIES
+
+In new projects, please use the ``MPI_<lang>_XXX`` equivalents.
+Additionally, the following variables are deprecated:
+
+``MPI_<lang>_COMPILE_FLAGS``
+  Use ``MPI_<lang>_COMPILE_OPTIONS`` and ``MPI_<lang>_COMPILE_DEFINITIONS`` instead.
+``MPI_<lang>_INCLUDE_PATH``
+  For consumption use ``MPI_<lang>_INCLUDE_DIRS`` and for specifying folders use ``MPI_<lang>_ADDITIONAL_INCLUDE_DIRS`` instead.
+``MPIEXEC``
+  Use ``MPIEXEC_EXECUTABLE`` instead.
+#]=======================================================================]
 
 cmake_policy(PUSH)
 cmake_policy(SET CMP0057 NEW) # if IN_LIST
diff --git a/Modules/FindMatlab.cmake b/Modules/FindMatlab.cmake
index 547a330..8ba88b0 100644
--- a/Modules/FindMatlab.cmake
+++ b/Modules/FindMatlab.cmake
@@ -1,232 +1,233 @@
 # Distributed under the OSI-approved BSD 3-Clause License.  See accompanying
 # file Copyright.txt or https://cmake.org/licensing for details.
 
-#.rst:
-# FindMatlab
-# ----------
-#
-# Finds Matlab or Matlab Compiler Runtime (MCR) and provides Matlab tools,
-# libraries and compilers to CMake.
-#
-# This package primary purpose is to find the libraries associated with Matlab
-# or the MCR in order to be able to build Matlab extensions (mex files). It
-# can also be used:
-#
-# * to run specific commands in Matlab in case Matlab is available
-# * for declaring Matlab unit test
-# * to retrieve various information from Matlab (mex extensions, versions and
-#   release queries, ...)
-#
-# The module supports the following components:
-#
-# * ``MX_LIBRARY``, ``ENG_LIBRARY`` and ``MAT_LIBRARY``: respectively the ``MX``,
-#   ``ENG`` and ``MAT`` libraries of Matlab
-# * ``ENGINE_LIBRARY``, ``DATAARRAY_LIBRARY``: respectively the ``MatlabEngine``
-#   and ``MatlabDataArray`` libraries of Matlab (Matlab 2018a and later)
-# * ``MAIN_PROGRAM`` the Matlab binary program. Note that this component is not
-#   available on the MCR version, and will yield an error if the MCR is found
-#   instead of the regular Matlab installation.
-# * ``MEX_COMPILER`` the MEX compiler.
-# * ``MCC_COMPILER`` the MCC compiler, included with the Matlab Compiler add-on.
-# * ``SIMULINK`` the Simulink environment.
-#
-# .. note::
-#
-#   The version given to the :command:`find_package` directive is the Matlab
-#   **version**, which should not be confused with the Matlab *release* name
-#   (eg. `R2014`).
-#   The :command:`matlab_get_version_from_release_name` and
-#   :command:`matlab_get_release_name_from_version` provide a mapping
-#   between the release name and the version.
-#
-# The variable :variable:`Matlab_ROOT_DIR` may be specified in order to give
-# the path of the desired Matlab version. Otherwise, the behaviour is platform
-# specific:
-#
-# * Windows: The installed versions of Matlab/MCR are retrieved from the
-#   Windows registry
-# * OS X: The installed versions of Matlab/MCR are given by the MATLAB
-#   default installation paths in ``/Application``. If no such application is
-#   found, it falls back to the one that might be accessible from the ``PATH``.
-# * Unix: The desired Matlab should be accessible from the ``PATH``. This does
-#   not work for MCR installation and :variable:`Matlab_ROOT_DIR` should be
-#   specified on this platform.
-#
-# Additional information is provided when :variable:`MATLAB_FIND_DEBUG` is set.
-# When a Matlab/MCR installation is found automatically and the ``MATLAB_VERSION``
-# is not given, the version is queried from Matlab directly (on Windows this
-# may pop up a Matlab window) or from the MCR installation.
-#
-# The mapping of the release names and the version of Matlab is performed by
-# defining pairs (name, version).  The variable
-# :variable:`MATLAB_ADDITIONAL_VERSIONS` may be provided before the call to
-# the :command:`find_package` in order to handle additional versions.
-#
-# A Matlab scripts can be added to the set of tests using the
-# :command:`matlab_add_unit_test`. By default, the Matlab unit test framework
-# will be used (>= 2013a) to run this script, but regular ``.m`` files
-# returning an exit code can be used as well (0 indicating a success).
-#
-# Module Input Variables
-# ^^^^^^^^^^^^^^^^^^^^^^
-#
-# Users or projects may set the following variables to configure the module
-# behaviour:
-#
-# :variable:`Matlab_ROOT_DIR`
-#   the root of the Matlab installation.
-# :variable:`MATLAB_FIND_DEBUG`
-#   outputs debug information
-# :variable:`MATLAB_ADDITIONAL_VERSIONS`
-#   additional versions of Matlab for the automatic retrieval of the installed
-#   versions.
-#
-# Variables defined by the module
-# ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
-#
-# Result variables
-# """"""""""""""""
-#
-# ``Matlab_FOUND``
-#   ``TRUE`` if the Matlab installation is found, ``FALSE``
-#   otherwise. All variable below are defined if Matlab is found.
-# ``Matlab_ROOT_DIR``
-#   the final root of the Matlab installation determined by the FindMatlab
-#   module.
-# ``Matlab_MAIN_PROGRAM``
-#   the Matlab binary program. Available only if the component ``MAIN_PROGRAM``
-#   is given in the :command:`find_package` directive.
-# ``Matlab_INCLUDE_DIRS``
-#  the path of the Matlab libraries headers
-# ``Matlab_MEX_LIBRARY``
-#   library for mex, always available.
-# ``Matlab_MX_LIBRARY``
-#   mx library of Matlab (arrays). Available only if the component
-#   ``MX_LIBRARY`` has been requested.
-# ``Matlab_ENG_LIBRARY``
-#   Matlab engine library. Available only if the component ``ENG_LIBRARY``
-#   is requested.
-# ``Matlab_MAT_LIBRARY``
-#   Matlab matrix library. Available only if the component ``MAT_LIBRARY``
-#   is requested.
-# ``Matlab_ENGINE_LIBRARY``
-#   Matlab C++ engine library. Available only if the component ``ENGINE_LIBRARY``
-#   is requested.
-# ``Matlab_DATAARRAY_LIBRARY``
-#   Matlab C++ data array library. Available only if the component ``DATAARRAY_LIBRARY``
-#   is requested.
-# ``Matlab_LIBRARIES``
-#   the whole set of libraries of Matlab
-# ``Matlab_MEX_COMPILER``
-#   the mex compiler of Matlab. Currently not used.
-#   Available only if the component ``MEX_COMPILER`` is requested.
-# ``Matlab_MCC_COMPILER``
-#   the mcc compiler of Matlab. Included with the Matlab Compiler add-on.
-#   Available only if the component ``MCC_COMPILER`` is requested.
-#
-# Cached variables
-# """"""""""""""""
-#
-# ``Matlab_MEX_EXTENSION``
-#   the extension of the mex files for the current platform (given by Matlab).
-# ``Matlab_ROOT_DIR``
-#   the location of the root of the Matlab installation found. If this value
-#   is changed by the user, the result variables are recomputed.
-#
-# Provided macros
-# ^^^^^^^^^^^^^^^
-#
-# :command:`matlab_get_version_from_release_name`
-#   returns the version from the release name
-# :command:`matlab_get_release_name_from_version`
-#   returns the release name from the Matlab version
-#
-# Provided functions
-# ^^^^^^^^^^^^^^^^^^
-#
-# :command:`matlab_add_mex`
-#   adds a target compiling a MEX file.
-# :command:`matlab_add_unit_test`
-#   adds a Matlab unit test file as a test to the project.
-# :command:`matlab_extract_all_installed_versions_from_registry`
-#   parses the registry for all Matlab versions. Available on Windows only.
-#   The part of the registry parsed is dependent on the host processor
-# :command:`matlab_get_all_valid_matlab_roots_from_registry`
-#   returns all the possible Matlab or MCR paths, according to a previously
-#   given list. Only the existing/accessible paths are kept. This is mainly
-#   useful for the searching all possible Matlab installation.
-# :command:`matlab_get_mex_suffix`
-#   returns the suffix to be used for the mex files
-#   (platform/architecture dependent)
-# :command:`matlab_get_version_from_matlab_run`
-#   returns the version of Matlab/MCR, given the full directory of the Matlab/MCR
-#   installation path.
-#
-#
-# Known issues
-# ^^^^^^^^^^^^
-#
-# **Symbol clash in a MEX target**
-#   By default, every symbols inside a MEX
-#   file defined with the command :command:`matlab_add_mex` have hidden
-#   visibility, except for the entry point. This is the default behaviour of
-#   the MEX compiler, which lowers the risk of symbol collision between the
-#   libraries shipped with Matlab, and the libraries to which the MEX file is
-#   linking to. This is also the default on Windows platforms.
-#
-#   However, this is not sufficient in certain case, where for instance your
-#   MEX file is linking against libraries that are already loaded by Matlab,
-#   even if those libraries have different SONAMES.
-#   A possible solution is to hide the symbols of the libraries to which the
-#   MEX target is linking to. This can be achieved in GNU GCC compilers with
-#   the linker option ``-Wl,--exclude-libs,ALL``.
-#
-# **Tests using GPU resources**
-#   in case your MEX file is using the GPU and
-#   in order to be able to run unit tests on this MEX file, the GPU resources
-#   should be properly released by Matlab. A possible solution is to make
-#   Matlab aware of the use of the GPU resources in the session, which can be
-#   performed by a command such as ``D = gpuDevice()`` at the beginning of
-#   the test script (or via a fixture).
-#
-#
-# Reference
-# ^^^^^^^^^
-#
-# .. variable:: Matlab_ROOT_DIR
-#
-#    The root folder of the Matlab installation. If set before the call to
-#    :command:`find_package`, the module will look for the components in that
-#    path. If not set, then an automatic search of Matlab
-#    will be performed. If set, it should point to a valid version of Matlab.
-#
-# .. variable:: MATLAB_FIND_DEBUG
-#
-#    If set, the lookup of Matlab and the intermediate configuration steps are
-#    outputted to the console.
-#
-# .. variable:: MATLAB_ADDITIONAL_VERSIONS
-#
-#   If set, specifies additional versions of Matlab that may be looked for.
-#   The variable should be a list of strings, organised by pairs of release
-#   name and versions, such as follows::
-#
-#     set(MATLAB_ADDITIONAL_VERSIONS
-#         "release_name1=corresponding_version1"
-#         "release_name2=corresponding_version2"
-#         ...
-#         )
-#
-#   Example::
-#
-#     set(MATLAB_ADDITIONAL_VERSIONS
-#         "R2013b=8.2"
-#         "R2013a=8.1"
-#         "R2012b=8.0")
-#
-#   The order of entries in this list matters when several versions of
-#   Matlab are installed. The priority is set according to the ordering in
-#   this list.
+#[=======================================================================[.rst:
+FindMatlab
+----------
+
+Finds Matlab or Matlab Compiler Runtime (MCR) and provides Matlab tools,
+libraries and compilers to CMake.
+
+This package primary purpose is to find the libraries associated with Matlab
+or the MCR in order to be able to build Matlab extensions (mex files). It
+can also be used:
+
+* to run specific commands in Matlab in case Matlab is available
+* for declaring Matlab unit test
+* to retrieve various information from Matlab (mex extensions, versions and
+  release queries, ...)
+
+The module supports the following components:
+
+* ``MX_LIBRARY``, ``ENG_LIBRARY`` and ``MAT_LIBRARY``: respectively the ``MX``,
+  ``ENG`` and ``MAT`` libraries of Matlab
+* ``ENGINE_LIBRARY``, ``DATAARRAY_LIBRARY``: respectively the ``MatlabEngine``
+  and ``MatlabDataArray`` libraries of Matlab (Matlab 2018a and later)
+* ``MAIN_PROGRAM`` the Matlab binary program. Note that this component is not
+  available on the MCR version, and will yield an error if the MCR is found
+  instead of the regular Matlab installation.
+* ``MEX_COMPILER`` the MEX compiler.
+* ``MCC_COMPILER`` the MCC compiler, included with the Matlab Compiler add-on.
+* ``SIMULINK`` the Simulink environment.
+
+.. note::
+
+  The version given to the :command:`find_package` directive is the Matlab
+  **version**, which should not be confused with the Matlab *release* name
+  (eg. `R2014`).
+  The :command:`matlab_get_version_from_release_name` and
+  :command:`matlab_get_release_name_from_version` provide a mapping
+  between the release name and the version.
+
+The variable :variable:`Matlab_ROOT_DIR` may be specified in order to give
+the path of the desired Matlab version. Otherwise, the behaviour is platform
+specific:
+
+* Windows: The installed versions of Matlab/MCR are retrieved from the
+  Windows registry
+* OS X: The installed versions of Matlab/MCR are given by the MATLAB
+  default installation paths in ``/Application``. If no such application is
+  found, it falls back to the one that might be accessible from the ``PATH``.
+* Unix: The desired Matlab should be accessible from the ``PATH``. This does
+  not work for MCR installation and :variable:`Matlab_ROOT_DIR` should be
+  specified on this platform.
+
+Additional information is provided when :variable:`MATLAB_FIND_DEBUG` is set.
+When a Matlab/MCR installation is found automatically and the ``MATLAB_VERSION``
+is not given, the version is queried from Matlab directly (on Windows this
+may pop up a Matlab window) or from the MCR installation.
+
+The mapping of the release names and the version of Matlab is performed by
+defining pairs (name, version).  The variable
+:variable:`MATLAB_ADDITIONAL_VERSIONS` may be provided before the call to
+the :command:`find_package` in order to handle additional versions.
+
+A Matlab scripts can be added to the set of tests using the
+:command:`matlab_add_unit_test`. By default, the Matlab unit test framework
+will be used (>= 2013a) to run this script, but regular ``.m`` files
+returning an exit code can be used as well (0 indicating a success).
+
+Module Input Variables
+^^^^^^^^^^^^^^^^^^^^^^
+
+Users or projects may set the following variables to configure the module
+behaviour:
+
+:variable:`Matlab_ROOT_DIR`
+  the root of the Matlab installation.
+:variable:`MATLAB_FIND_DEBUG`
+  outputs debug information
+:variable:`MATLAB_ADDITIONAL_VERSIONS`
+  additional versions of Matlab for the automatic retrieval of the installed
+  versions.
+
+Variables defined by the module
+^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
+
+Result variables
+""""""""""""""""
+
+``Matlab_FOUND``
+  ``TRUE`` if the Matlab installation is found, ``FALSE``
+  otherwise. All variable below are defined if Matlab is found.
+``Matlab_ROOT_DIR``
+  the final root of the Matlab installation determined by the FindMatlab
+  module.
+``Matlab_MAIN_PROGRAM``
+  the Matlab binary program. Available only if the component ``MAIN_PROGRAM``
+  is given in the :command:`find_package` directive.
+``Matlab_INCLUDE_DIRS``
+ the path of the Matlab libraries headers
+``Matlab_MEX_LIBRARY``
+  library for mex, always available.
+``Matlab_MX_LIBRARY``
+  mx library of Matlab (arrays). Available only if the component
+  ``MX_LIBRARY`` has been requested.
+``Matlab_ENG_LIBRARY``
+  Matlab engine library. Available only if the component ``ENG_LIBRARY``
+  is requested.
+``Matlab_MAT_LIBRARY``
+  Matlab matrix library. Available only if the component ``MAT_LIBRARY``
+  is requested.
+``Matlab_ENGINE_LIBRARY``
+  Matlab C++ engine library. Available only if the component ``ENGINE_LIBRARY``
+  is requested.
+``Matlab_DATAARRAY_LIBRARY``
+  Matlab C++ data array library. Available only if the component ``DATAARRAY_LIBRARY``
+  is requested.
+``Matlab_LIBRARIES``
+  the whole set of libraries of Matlab
+``Matlab_MEX_COMPILER``
+  the mex compiler of Matlab. Currently not used.
+  Available only if the component ``MEX_COMPILER`` is requested.
+``Matlab_MCC_COMPILER``
+  the mcc compiler of Matlab. Included with the Matlab Compiler add-on.
+  Available only if the component ``MCC_COMPILER`` is requested.
+
+Cached variables
+""""""""""""""""
+
+``Matlab_MEX_EXTENSION``
+  the extension of the mex files for the current platform (given by Matlab).
+``Matlab_ROOT_DIR``
+  the location of the root of the Matlab installation found. If this value
+  is changed by the user, the result variables are recomputed.
+
+Provided macros
+^^^^^^^^^^^^^^^
+
+:command:`matlab_get_version_from_release_name`
+  returns the version from the release name
+:command:`matlab_get_release_name_from_version`
+  returns the release name from the Matlab version
+
+Provided functions
+^^^^^^^^^^^^^^^^^^
+
+:command:`matlab_add_mex`
+  adds a target compiling a MEX file.
+:command:`matlab_add_unit_test`
+  adds a Matlab unit test file as a test to the project.
+:command:`matlab_extract_all_installed_versions_from_registry`
+  parses the registry for all Matlab versions. Available on Windows only.
+  The part of the registry parsed is dependent on the host processor
+:command:`matlab_get_all_valid_matlab_roots_from_registry`
+  returns all the possible Matlab or MCR paths, according to a previously
+  given list. Only the existing/accessible paths are kept. This is mainly
+  useful for the searching all possible Matlab installation.
+:command:`matlab_get_mex_suffix`
+  returns the suffix to be used for the mex files
+  (platform/architecture dependent)
+:command:`matlab_get_version_from_matlab_run`
+  returns the version of Matlab/MCR, given the full directory of the Matlab/MCR
+  installation path.
+
+
+Known issues
+^^^^^^^^^^^^
+
+**Symbol clash in a MEX target**
+  By default, every symbols inside a MEX
+  file defined with the command :command:`matlab_add_mex` have hidden
+  visibility, except for the entry point. This is the default behaviour of
+  the MEX compiler, which lowers the risk of symbol collision between the
+  libraries shipped with Matlab, and the libraries to which the MEX file is
+  linking to. This is also the default on Windows platforms.
+
+  However, this is not sufficient in certain case, where for instance your
+  MEX file is linking against libraries that are already loaded by Matlab,
+  even if those libraries have different SONAMES.
+  A possible solution is to hide the symbols of the libraries to which the
+  MEX target is linking to. This can be achieved in GNU GCC compilers with
+  the linker option ``-Wl,--exclude-libs,ALL``.
+
+**Tests using GPU resources**
+  in case your MEX file is using the GPU and
+  in order to be able to run unit tests on this MEX file, the GPU resources
+  should be properly released by Matlab. A possible solution is to make
+  Matlab aware of the use of the GPU resources in the session, which can be
+  performed by a command such as ``D = gpuDevice()`` at the beginning of
+  the test script (or via a fixture).
+
+
+Reference
+^^^^^^^^^
+
+.. variable:: Matlab_ROOT_DIR
+
+   The root folder of the Matlab installation. If set before the call to
+   :command:`find_package`, the module will look for the components in that
+   path. If not set, then an automatic search of Matlab
+   will be performed. If set, it should point to a valid version of Matlab.
+
+.. variable:: MATLAB_FIND_DEBUG
+
+   If set, the lookup of Matlab and the intermediate configuration steps are
+   outputted to the console.
+
+.. variable:: MATLAB_ADDITIONAL_VERSIONS
+
+  If set, specifies additional versions of Matlab that may be looked for.
+  The variable should be a list of strings, organised by pairs of release
+  name and versions, such as follows::
+
+    set(MATLAB_ADDITIONAL_VERSIONS
+        "release_name1=corresponding_version1"
+        "release_name2=corresponding_version2"
+        ...
+        )
+
+  Example::
+
+    set(MATLAB_ADDITIONAL_VERSIONS
+        "R2013b=8.2"
+        "R2013a=8.1"
+        "R2012b=8.0")
+
+  The order of entries in this list matters when several versions of
+  Matlab are installed. The priority is set according to the ordering in
+  this list.
+#]=======================================================================]
 
 set(_FindMatlab_SELF_DIR "${CMAKE_CURRENT_LIST_DIR}")
 
@@ -271,10 +272,11 @@ if(NOT EXISTS "${_matlab_temporary_folder}")
   file(MAKE_DIRECTORY "${_matlab_temporary_folder}")
 endif()
 
-#.rst:
-# .. command:: matlab_get_version_from_release_name
-#
-#   Returns the version of Matlab (17.58) from a release name (R2017k)
+#[=======================================================================[.rst:
+.. command:: matlab_get_version_from_release_name
+
+  Returns the version of Matlab (17.58) from a release name (R2017k)
+#]=======================================================================]
 macro(matlab_get_version_from_release_name release_name version_name)
 
   string(REGEX MATCHALL "${release_name}=([0-9]+\\.?[0-9]*)" _matched ${MATLAB_VERSIONS_MAPPING})
@@ -293,10 +295,11 @@ endmacro()
 
 
 
-#.rst:
-# .. command:: matlab_get_release_name_from_version
-#
-#   Returns the release name (R2017k) from the version of Matlab (17.58)
+#[=======================================================================[.rst:
+.. command:: matlab_get_release_name_from_version
+
+  Returns the release name (R2017k) from the version of Matlab (17.58)
+#]=======================================================================]
 macro(matlab_get_release_name_from_version version release_name)
 
   set(${release_name} "")
@@ -353,22 +356,23 @@ macro(matlab_get_supported_versions list_versions)
 endmacro()
 
 
-#.rst:
-# .. command:: matlab_extract_all_installed_versions_from_registry
-#
-#   This function parses the registry and founds the Matlab versions that are
-#   installed. The found versions are returned in `matlab_versions`.
-#   Set `win64` to `TRUE` if the 64 bit version of Matlab should be looked for
-#   The returned list contains all versions under
-#   ``HKLM\\SOFTWARE\\Mathworks\\MATLAB`` and
-#   ``HKLM\\SOFTWARE\\Mathworks\\MATLAB Runtime`` or an empty list in case an
-#   error occurred (or nothing found).
-#
-#   .. note::
-#
-#     Only the versions are provided. No check is made over the existence of the
-#     installation referenced in the registry,
-#
+#[=======================================================================[.rst:
+.. command:: matlab_extract_all_installed_versions_from_registry
+
+  This function parses the registry and founds the Matlab versions that are
+  installed. The found versions are returned in `matlab_versions`.
+  Set `win64` to `TRUE` if the 64 bit version of Matlab should be looked for
+  The returned list contains all versions under
+  ``HKLM\\SOFTWARE\\Mathworks\\MATLAB`` and
+  ``HKLM\\SOFTWARE\\Mathworks\\MATLAB Runtime`` or an empty list in case an
+  error occurred (or nothing found).
+
+  .. note::
+
+    Only the versions are provided. No check is made over the existence of the
+    installation referenced in the registry,
+
+#]=======================================================================]
 function(matlab_extract_all_installed_versions_from_registry win64 matlab_versions)
 
   if(NOT CMAKE_HOST_WIN32)
@@ -477,25 +481,26 @@ endmacro()
 
 
 
-#.rst:
-# .. command:: matlab_get_all_valid_matlab_roots_from_registry
-#
-#   Populates the Matlab root with valid versions of Matlab or
-#   Matlab Runtime (MCR).
-#   The returned matlab_roots is organized in triplets
-#   ``(type,version_number,matlab_root_path)``, where ``type``
-#   indicates either ``MATLAB`` or ``MCR``.
-#
-#   ::
-#
-#     matlab_get_all_valid_matlab_roots_from_registry(
-#         matlab_versions
-#         matlab_roots)
-#
-#   ``matlab_versions``
-#     the versions of each of the Matlab or MCR installations
-#   ``matlab_roots``
-#     the location of each of the Matlab or MCR installations
+#[=======================================================================[.rst:
+.. command:: matlab_get_all_valid_matlab_roots_from_registry
+
+  Populates the Matlab root with valid versions of Matlab or
+  Matlab Runtime (MCR).
+  The returned matlab_roots is organized in triplets
+  ``(type,version_number,matlab_root_path)``, where ``type``
+  indicates either ``MATLAB`` or ``MCR``.
+
+  ::
+
+    matlab_get_all_valid_matlab_roots_from_registry(
+        matlab_versions
+        matlab_roots)
+
+  ``matlab_versions``
+    the versions of each of the Matlab or MCR installations
+  ``matlab_roots``
+    the location of each of the Matlab or MCR installations
+#]=======================================================================]
 function(matlab_get_all_valid_matlab_roots_from_registry matlab_versions matlab_roots)
 
   # The matlab_versions comes either from
@@ -534,23 +539,24 @@ function(matlab_get_all_valid_matlab_roots_from_registry matlab_versions matlab_
   set(${matlab_roots} ${_matlab_roots_list} PARENT_SCOPE)
 endfunction()
 
-#.rst:
-# .. command:: matlab_get_mex_suffix
-#
-#   Returns the extension of the mex files (the suffixes).
-#   This function should not be called before the appropriate Matlab root has
-#   been found.
-#
-#   ::
-#
-#     matlab_get_mex_suffix(
-#         matlab_root
-#         mex_suffix)
-#
-#   ``matlab_root``
-#     the root of the Matlab/MCR installation
-#   ``mex_suffix``
-#     the variable name in which the suffix will be returned.
+#[=======================================================================[.rst:
+.. command:: matlab_get_mex_suffix
+
+  Returns the extension of the mex files (the suffixes).
+  This function should not be called before the appropriate Matlab root has
+  been found.
+
+  ::
+
+    matlab_get_mex_suffix(
+        matlab_root
+        mex_suffix)
+
+  ``matlab_root``
+    the root of the Matlab/MCR installation
+  ``mex_suffix``
+    the variable name in which the suffix will be returned.
+#]=======================================================================]
 function(matlab_get_mex_suffix matlab_root mex_suffix)
 
   # todo setup the extension properly. Currently I do not know if this is
@@ -636,23 +642,24 @@ endfunction()
 
 
 
-#.rst:
-# .. command:: matlab_get_version_from_matlab_run
-#
-#   This function runs Matlab program specified on arguments and extracts its
-#   version. If the path provided for the Matlab installation points to an MCR
-#   installation, the version is extracted from the installed files.
-#
-#   ::
-#
-#     matlab_get_version_from_matlab_run(
-#         matlab_binary_path
-#         matlab_list_versions)
-#
-#   ``matlab_binary_path``
-#     the location of the `matlab` binary executable
-#   ``matlab_list_versions``
-#     the version extracted from Matlab
+#[=======================================================================[.rst:
+.. command:: matlab_get_version_from_matlab_run
+
+  This function runs Matlab program specified on arguments and extracts its
+  version. If the path provided for the Matlab installation points to an MCR
+  installation, the version is extracted from the installed files.
+
+  ::
+
+    matlab_get_version_from_matlab_run(
+        matlab_binary_path
+        matlab_list_versions)
+
+  ``matlab_binary_path``
+    the location of the `matlab` binary executable
+  ``matlab_list_versions``
+    the version extracted from Matlab
+#]=======================================================================]
 function(matlab_get_version_from_matlab_run matlab_binary_program matlab_list_versions)
 
   set(${matlab_list_versions} "" PARENT_SCOPE)
@@ -754,76 +761,77 @@ function(matlab_get_version_from_matlab_run matlab_binary_program matlab_list_ve
 
 endfunction()
 
-#.rst:
-# .. command:: matlab_add_unit_test
-#
-#   Adds a Matlab unit test to the test set of cmake/ctest.
-#   This command requires the component ``MAIN_PROGRAM`` and hence is not
-#   available for an MCR installation.
-#
-#   The unit test uses the Matlab unittest framework (default, available
-#   starting Matlab 2013b+) except if the option ``NO_UNITTEST_FRAMEWORK``
-#   is given.
-#
-#   The function expects one Matlab test script file to be given.
-#   In the case ``NO_UNITTEST_FRAMEWORK`` is given, the unittest script file
-#   should contain the script to be run, plus an exit command with the exit
-#   value. This exit value will be passed to the ctest framework (0 success,
-#   non 0 failure). Additional arguments accepted by :command:`add_test` can be
-#   passed through ``TEST_ARGS`` (eg. ``CONFIGURATION <config> ...``).
-#
-#   ::
-#
-#     matlab_add_unit_test(
-#         NAME <name>
-#         UNITTEST_FILE matlab_file_containing_unittest.m
-#         [CUSTOM_TEST_COMMAND matlab_command_to_run_as_test]
-#         [UNITTEST_PRECOMMAND matlab_command_to_run]
-#         [TIMEOUT timeout]
-#         [ADDITIONAL_PATH path1 [path2 ...]]
-#         [MATLAB_ADDITIONAL_STARTUP_OPTIONS option1 [option2 ...]]
-#         [TEST_ARGS arg1 [arg2 ...]]
-#         [NO_UNITTEST_FRAMEWORK]
-#         )
-#
-#   The function arguments are:
-#
-#   ``NAME``
-#     name of the unittest in ctest.
-#   ``UNITTEST_FILE``
-#     the matlab unittest file. Its path will be automatically
-#     added to the Matlab path.
-#   ``CUSTOM_TEST_COMMAND``
-#     Matlab script command to run as the test.
-#     If this is not set, then the following is run:
-#     ``runtests('matlab_file_name'), exit(max([ans(1,:).Failed]))``
-#     where ``matlab_file_name`` is the ``UNITTEST_FILE`` without the extension.
-#   ``UNITTEST_PRECOMMAND``
-#     Matlab script command to be ran before the file
-#     containing the test (eg. GPU device initialisation based on CMake
-#     variables).
-#   ``TIMEOUT``
-#     the test timeout in seconds. Defaults to 180 seconds as the
-#     Matlab unit test may hang.
-#   ``ADDITIONAL_PATH``
-#     a list of paths to add to the Matlab path prior to
-#     running the unit test.
-#   ``MATLAB_ADDITIONAL_STARTUP_OPTIONS``
-#     a list of additional option in order
-#     to run Matlab from the command line.
-#     ``-nosplash -nodesktop -nodisplay`` are always added.
-#   ``TEST_ARGS``
-#     Additional options provided to the add_test command. These
-#     options are added to the default options (eg. "CONFIGURATIONS Release")
-#   ``NO_UNITTEST_FRAMEWORK``
-#     when set, indicates that the test should not
-#     use the unittest framework of Matlab (available for versions >= R2013a).
-#   ``WORKING_DIRECTORY``
-#     This will be the working directory for the test. If specified it will
-#     also be the output directory used for the log file of the test run.
-#     If not specified the temporary directory ``${CMAKE_BINARY_DIR}/Matlab`` will
-#     be used as the working directory and the log location.
-#
+#[=======================================================================[.rst:
+.. command:: matlab_add_unit_test
+
+  Adds a Matlab unit test to the test set of cmake/ctest.
+  This command requires the component ``MAIN_PROGRAM`` and hence is not
+  available for an MCR installation.
+
+  The unit test uses the Matlab unittest framework (default, available
+  starting Matlab 2013b+) except if the option ``NO_UNITTEST_FRAMEWORK``
+  is given.
+
+  The function expects one Matlab test script file to be given.
+  In the case ``NO_UNITTEST_FRAMEWORK`` is given, the unittest script file
+  should contain the script to be run, plus an exit command with the exit
+  value. This exit value will be passed to the ctest framework (0 success,
+  non 0 failure). Additional arguments accepted by :command:`add_test` can be
+  passed through ``TEST_ARGS`` (eg. ``CONFIGURATION <config> ...``).
+
+  ::
+
+    matlab_add_unit_test(
+        NAME <name>
+        UNITTEST_FILE matlab_file_containing_unittest.m
+        [CUSTOM_TEST_COMMAND matlab_command_to_run_as_test]
+        [UNITTEST_PRECOMMAND matlab_command_to_run]
+        [TIMEOUT timeout]
+        [ADDITIONAL_PATH path1 [path2 ...]]
+        [MATLAB_ADDITIONAL_STARTUP_OPTIONS option1 [option2 ...]]
+        [TEST_ARGS arg1 [arg2 ...]]
+        [NO_UNITTEST_FRAMEWORK]
+        )
+
+  The function arguments are:
+
+  ``NAME``
+    name of the unittest in ctest.
+  ``UNITTEST_FILE``
+    the matlab unittest file. Its path will be automatically
+    added to the Matlab path.
+  ``CUSTOM_TEST_COMMAND``
+    Matlab script command to run as the test.
+    If this is not set, then the following is run:
+    ``runtests('matlab_file_name'), exit(max([ans(1,:).Failed]))``
+    where ``matlab_file_name`` is the ``UNITTEST_FILE`` without the extension.
+  ``UNITTEST_PRECOMMAND``
+    Matlab script command to be ran before the file
+    containing the test (eg. GPU device initialisation based on CMake
+    variables).
+  ``TIMEOUT``
+    the test timeout in seconds. Defaults to 180 seconds as the
+    Matlab unit test may hang.
+  ``ADDITIONAL_PATH``
+    a list of paths to add to the Matlab path prior to
+    running the unit test.
+  ``MATLAB_ADDITIONAL_STARTUP_OPTIONS``
+    a list of additional option in order
+    to run Matlab from the command line.
+    ``-nosplash -nodesktop -nodisplay`` are always added.
+  ``TEST_ARGS``
+    Additional options provided to the add_test command. These
+    options are added to the default options (eg. "CONFIGURATIONS Release")
+  ``NO_UNITTEST_FRAMEWORK``
+    when set, indicates that the test should not
+    use the unittest framework of Matlab (available for versions >= R2013a).
+  ``WORKING_DIRECTORY``
+    This will be the working directory for the test. If specified it will
+    also be the output directory used for the log file of the test run.
+    If not specified the temporary directory ``${CMAKE_BINARY_DIR}/Matlab`` will
+    be used as the working directory and the log location.
+
+#]=======================================================================]
 function(matlab_add_unit_test)
 
   if(NOT Matlab_MAIN_PROGRAM)
@@ -862,58 +870,59 @@ function(matlab_add_unit_test)
 endfunction()
 
 
-#.rst:
-# .. command:: matlab_add_mex
-#
-#   Adds a Matlab MEX target.
-#   This commands compiles the given sources with the current tool-chain in
-#   order to produce a MEX file. The final name of the produced output may be
-#   specified, as well as additional link libraries, and a documentation entry
-#   for the MEX file. Remaining arguments of the call are passed to the
-#   :command:`add_library` or :command:`add_executable` command.
-#
-#   ::
-#
-#      matlab_add_mex(
-#          NAME <name>
-#          [EXECUTABLE | MODULE | SHARED]
-#          SRC src1 [src2 ...]
-#          [OUTPUT_NAME output_name]
-#          [DOCUMENTATION file.txt]
-#          [LINK_TO target1 target2 ...]
-#          [...]
-#      )
-#
-#   ``NAME``
-#     name of the target.
-#   ``SRC``
-#     list of source files.
-#   ``LINK_TO``
-#     a list of additional link dependencies.  The target links to ``libmex``
-#     by default. If ``Matlab_MX_LIBRARY`` is defined, it also
-#     links to ``libmx``.
-#   ``OUTPUT_NAME``
-#     if given, overrides the default name. The default name is
-#     the name of the target without any prefix and
-#     with ``Matlab_MEX_EXTENSION`` suffix.
-#   ``DOCUMENTATION``
-#     if given, the file ``file.txt`` will be considered as
-#     being the documentation file for the MEX file. This file is copied into
-#     the same folder without any processing, with the same name as the final
-#     mex file, and with extension `.m`. In that case, typing ``help <name>``
-#     in Matlab prints the documentation contained in this file.
-#   ``MODULE`` or ``SHARED`` may be given to specify the type of library to be
-#     created. ``EXECUTABLE`` may be given to create an executable instead of
-#     a library. If no type is given explicitly, the type is ``SHARED``.
-#
-#   The documentation file is not processed and should be in the following
-#   format:
-#
-#   ::
-#
-#     % This is the documentation
-#     function ret = mex_target_output_name(input1)
-#
+#[=======================================================================[.rst:
+.. command:: matlab_add_mex
+
+  Adds a Matlab MEX target.
+  This commands compiles the given sources with the current tool-chain in
+  order to produce a MEX file. The final name of the produced output may be
+  specified, as well as additional link libraries, and a documentation entry
+  for the MEX file. Remaining arguments of the call are passed to the
+  :command:`add_library` or :command:`add_executable` command.
+
+  ::
+
+     matlab_add_mex(
+         NAME <name>
+         [EXECUTABLE | MODULE | SHARED]
+         SRC src1 [src2 ...]
+         [OUTPUT_NAME output_name]
+         [DOCUMENTATION file.txt]
+         [LINK_TO target1 target2 ...]
+         [...]
+     )
+
+  ``NAME``
+    name of the target.
+  ``SRC``
+    list of source files.
+  ``LINK_TO``
+    a list of additional link dependencies.  The target links to ``libmex``
+    by default. If ``Matlab_MX_LIBRARY`` is defined, it also
+    links to ``libmx``.
+  ``OUTPUT_NAME``
+    if given, overrides the default name. The default name is
+    the name of the target without any prefix and
+    with ``Matlab_MEX_EXTENSION`` suffix.
+  ``DOCUMENTATION``
+    if given, the file ``file.txt`` will be considered as
+    being the documentation file for the MEX file. This file is copied into
+    the same folder without any processing, with the same name as the final
+    mex file, and with extension `.m`. In that case, typing ``help <name>``
+    in Matlab prints the documentation contained in this file.
+  ``MODULE`` or ``SHARED`` may be given to specify the type of library to be
+    created. ``EXECUTABLE`` may be given to create an executable instead of
+    a library. If no type is given explicitly, the type is ``SHARED``.
+
+  The documentation file is not processed and should be in the following
+  format:
+
+  ::
+
+    % This is the documentation
+    function ret = mex_target_output_name(input1)
+
+#]=======================================================================]
 function(matlab_add_mex)
 
   if(NOT WIN32)
diff --git a/Modules/FindMotif.cmake b/Modules/FindMotif.cmake
index 7304d95..4f7080a 100644
--- a/Modules/FindMotif.cmake
+++ b/Modules/FindMotif.cmake
@@ -1,19 +1,20 @@
 # Distributed under the OSI-approved BSD 3-Clause License.  See accompanying
 # file Copyright.txt or https://cmake.org/licensing for details.
 
-#.rst:
-# FindMotif
-# ---------
-#
-# Try to find Motif (or lesstif)
-#
-# Once done this will define:
-#
-# ::
-#
-#   MOTIF_FOUND        - system has MOTIF
-#   MOTIF_INCLUDE_DIR  - include paths to use Motif
-#   MOTIF_LIBRARIES    - Link these to use Motif
+#[=======================================================================[.rst:
+FindMotif
+---------
+
+Try to find Motif (or lesstif)
+
+Once done this will define:
+
+::
+
+  MOTIF_FOUND        - system has MOTIF
+  MOTIF_INCLUDE_DIR  - include paths to use Motif
+  MOTIF_LIBRARIES    - Link these to use Motif
+#]=======================================================================]
 
 set(MOTIF_FOUND 0)
 
diff --git a/Modules/FindOpenAL.cmake b/Modules/FindOpenAL.cmake
index 7521d51..dbd7961 100644
--- a/Modules/FindOpenAL.cmake
+++ b/Modules/FindOpenAL.cmake
@@ -1,21 +1,22 @@
 # Distributed under the OSI-approved BSD 3-Clause License.  See accompanying
 # file Copyright.txt or https://cmake.org/licensing for details.
 
-#.rst:
-# FindOpenAL
-# ----------
-#
-#
-#
-# Locate OpenAL This module defines OPENAL_LIBRARY OPENAL_FOUND, if
-# false, do not try to link to OpenAL OPENAL_INCLUDE_DIR, where to find
-# the headers
-#
-# $OPENALDIR is an environment variable that would correspond to the
-# ./configure --prefix=$OPENALDIR used in building OpenAL.
-#
-# Created by Eric Wing.  This was influenced by the FindSDL.cmake
-# module.
+#[=======================================================================[.rst:
+FindOpenAL
+----------
+
+
+
+Locate OpenAL This module defines OPENAL_LIBRARY OPENAL_FOUND, if
+false, do not try to link to OpenAL OPENAL_INCLUDE_DIR, where to find
+the headers
+
+$OPENALDIR is an environment variable that would correspond to the
+./configure --prefix=$OPENALDIR used in building OpenAL.
+
+Created by Eric Wing.  This was influenced by the FindSDL.cmake
+module.
+#]=======================================================================]
 
 # This makes the presumption that you are include al.h like
 # #include "al.h"
diff --git a/Modules/FindOpenCL.cmake b/Modules/FindOpenCL.cmake
index fe162b4..79c0382 100644
--- a/Modules/FindOpenCL.cmake
+++ b/Modules/FindOpenCL.cmake
@@ -1,35 +1,36 @@
 # Distributed under the OSI-approved BSD 3-Clause License.  See accompanying
 # file Copyright.txt or https://cmake.org/licensing for details.
 
-#.rst:
-# FindOpenCL
-# ----------
-#
-# Try to find OpenCL
-#
-# IMPORTED Targets
-# ^^^^^^^^^^^^^^^^
-#
-# This module defines :prop_tgt:`IMPORTED` target ``OpenCL::OpenCL``, if
-# OpenCL has been found.
-#
-# Result Variables
-# ^^^^^^^^^^^^^^^^
-#
-# This module defines the following variables::
-#
-#   OpenCL_FOUND          - True if OpenCL was found
-#   OpenCL_INCLUDE_DIRS   - include directories for OpenCL
-#   OpenCL_LIBRARIES      - link against this library to use OpenCL
-#   OpenCL_VERSION_STRING - Highest supported OpenCL version (eg. 1.2)
-#   OpenCL_VERSION_MAJOR  - The major version of the OpenCL implementation
-#   OpenCL_VERSION_MINOR  - The minor version of the OpenCL implementation
-#
-# The module will also define two cache variables::
-#
-#   OpenCL_INCLUDE_DIR    - the OpenCL include directory
-#   OpenCL_LIBRARY        - the path to the OpenCL library
-#
+#[=======================================================================[.rst:
+FindOpenCL
+----------
+
+Try to find OpenCL
+
+IMPORTED Targets
+^^^^^^^^^^^^^^^^
+
+This module defines :prop_tgt:`IMPORTED` target ``OpenCL::OpenCL``, if
+OpenCL has been found.
+
+Result Variables
+^^^^^^^^^^^^^^^^
+
+This module defines the following variables::
+
+  OpenCL_FOUND          - True if OpenCL was found
+  OpenCL_INCLUDE_DIRS   - include directories for OpenCL
+  OpenCL_LIBRARIES      - link against this library to use OpenCL
+  OpenCL_VERSION_STRING - Highest supported OpenCL version (eg. 1.2)
+  OpenCL_VERSION_MAJOR  - The major version of the OpenCL implementation
+  OpenCL_VERSION_MINOR  - The minor version of the OpenCL implementation
+
+The module will also define two cache variables::
+
+  OpenCL_INCLUDE_DIR    - the OpenCL include directory
+  OpenCL_LIBRARY        - the path to the OpenCL library
+
+#]=======================================================================]
 
 function(_FIND_OPENCL_VERSION)
   include(CheckSymbolExists)
diff --git a/Modules/FindOpenMP.cmake b/Modules/FindOpenMP.cmake
index df0bbc4..af45d8e 100644
--- a/Modules/FindOpenMP.cmake
+++ b/Modules/FindOpenMP.cmake
@@ -1,78 +1,79 @@
 # Distributed under the OSI-approved BSD 3-Clause License.  See accompanying
 # file Copyright.txt or https://cmake.org/licensing for details.
 
-#.rst:
-# FindOpenMP
-# ----------
-#
-# Finds OpenMP support
-#
-# This module can be used to detect OpenMP support in a compiler.  If
-# the compiler supports OpenMP, the flags required to compile with
-# OpenMP support are returned in variables for the different languages.
-# The variables may be empty if the compiler does not need a special
-# flag to support OpenMP.
-#
-# Variables
-# ^^^^^^^^^
-#
-# The module exposes the components ``C``, ``CXX``, and ``Fortran``.
-# Each of these controls the various languages to search OpenMP support for.
-#
-# Depending on the enabled components the following variables will be set:
-#
-# ``OpenMP_FOUND``
-#   Variable indicating that OpenMP flags for all requested languages have been found.
-#   If no components are specified, this is true if OpenMP settings for all enabled languages
-#   were detected.
-# ``OpenMP_VERSION``
-#   Minimal version of the OpenMP standard detected among the requested languages,
-#   or all enabled languages if no components were specified.
-#
-# This module will set the following variables per language in your
-# project, where ``<lang>`` is one of C, CXX, or Fortran:
-#
-# ``OpenMP_<lang>_FOUND``
-#   Variable indicating if OpenMP support for ``<lang>`` was detected.
-# ``OpenMP_<lang>_FLAGS``
-#   OpenMP compiler flags for ``<lang>``, separated by spaces.
-#
-# For linking with OpenMP code written in ``<lang>``, the following
-# variables are provided:
-#
-# ``OpenMP_<lang>_LIB_NAMES``
-#   :ref:`;-list <CMake Language Lists>` of libraries for OpenMP programs for ``<lang>``.
-# ``OpenMP_<libname>_LIBRARY``
-#   Location of the individual libraries needed for OpenMP support in ``<lang>``.
-# ``OpenMP_<lang>_LIBRARIES``
-#   A list of libraries needed to link with OpenMP code written in ``<lang>``.
-#
-# Additionally, the module provides :prop_tgt:`IMPORTED` targets:
-#
-# ``OpenMP::OpenMP_<lang>``
-#   Target for using OpenMP from ``<lang>``.
-#
-# Specifically for Fortran, the module sets the following variables:
-#
-# ``OpenMP_Fortran_HAVE_OMPLIB_HEADER``
-#   Boolean indicating if OpenMP is accessible through ``omp_lib.h``.
-# ``OpenMP_Fortran_HAVE_OMPLIB_MODULE``
-#   Boolean indicating if OpenMP is accessible through the ``omp_lib`` Fortran module.
-#
-# The module will also try to provide the OpenMP version variables:
-#
-# ``OpenMP_<lang>_SPEC_DATE``
-#   Date of the OpenMP specification implemented by the ``<lang>`` compiler.
-# ``OpenMP_<lang>_VERSION_MAJOR``
-#   Major version of OpenMP implemented by the ``<lang>`` compiler.
-# ``OpenMP_<lang>_VERSION_MINOR``
-#   Minor version of OpenMP implemented by the ``<lang>`` compiler.
-# ``OpenMP_<lang>_VERSION``
-#   OpenMP version implemented by the ``<lang>`` compiler.
-#
-# The specification date is formatted as given in the OpenMP standard:
-# ``yyyymm`` where ``yyyy`` and ``mm`` represents the year and month of
-# the OpenMP specification implemented by the ``<lang>`` compiler.
+#[=======================================================================[.rst:
+FindOpenMP
+----------
+
+Finds OpenMP support
+
+This module can be used to detect OpenMP support in a compiler.  If
+the compiler supports OpenMP, the flags required to compile with
+OpenMP support are returned in variables for the different languages.
+The variables may be empty if the compiler does not need a special
+flag to support OpenMP.
+
+Variables
+^^^^^^^^^
+
+The module exposes the components ``C``, ``CXX``, and ``Fortran``.
+Each of these controls the various languages to search OpenMP support for.
+
+Depending on the enabled components the following variables will be set:
+
+``OpenMP_FOUND``
+  Variable indicating that OpenMP flags for all requested languages have been found.
+  If no components are specified, this is true if OpenMP settings for all enabled languages
+  were detected.
+``OpenMP_VERSION``
+  Minimal version of the OpenMP standard detected among the requested languages,
+  or all enabled languages if no components were specified.
+
+This module will set the following variables per language in your
+project, where ``<lang>`` is one of C, CXX, or Fortran:
+
+``OpenMP_<lang>_FOUND``
+  Variable indicating if OpenMP support for ``<lang>`` was detected.
+``OpenMP_<lang>_FLAGS``
+  OpenMP compiler flags for ``<lang>``, separated by spaces.
+
+For linking with OpenMP code written in ``<lang>``, the following
+variables are provided:
+
+``OpenMP_<lang>_LIB_NAMES``
+  :ref:`;-list <CMake Language Lists>` of libraries for OpenMP programs for ``<lang>``.
+``OpenMP_<libname>_LIBRARY``
+  Location of the individual libraries needed for OpenMP support in ``<lang>``.
+``OpenMP_<lang>_LIBRARIES``
+  A list of libraries needed to link with OpenMP code written in ``<lang>``.
+
+Additionally, the module provides :prop_tgt:`IMPORTED` targets:
+
+``OpenMP::OpenMP_<lang>``
+  Target for using OpenMP from ``<lang>``.
+
+Specifically for Fortran, the module sets the following variables:
+
+``OpenMP_Fortran_HAVE_OMPLIB_HEADER``
+  Boolean indicating if OpenMP is accessible through ``omp_lib.h``.
+``OpenMP_Fortran_HAVE_OMPLIB_MODULE``
+  Boolean indicating if OpenMP is accessible through the ``omp_lib`` Fortran module.
+
+The module will also try to provide the OpenMP version variables:
+
+``OpenMP_<lang>_SPEC_DATE``
+  Date of the OpenMP specification implemented by the ``<lang>`` compiler.
+``OpenMP_<lang>_VERSION_MAJOR``
+  Major version of OpenMP implemented by the ``<lang>`` compiler.
+``OpenMP_<lang>_VERSION_MINOR``
+  Minor version of OpenMP implemented by the ``<lang>`` compiler.
+``OpenMP_<lang>_VERSION``
+  OpenMP version implemented by the ``<lang>`` compiler.
+
+The specification date is formatted as given in the OpenMP standard:
+``yyyymm`` where ``yyyy`` and ``mm`` represents the year and month of
+the OpenMP specification implemented by the ``<lang>`` compiler.
+#]=======================================================================]
 
 cmake_policy(PUSH)
 cmake_policy(SET CMP0012 NEW) # if() recognizes numbers and booleans
diff --git a/Modules/FindOpenSSL.cmake b/Modules/FindOpenSSL.cmake
index d5cd8bc..5f947fe 100644
--- a/Modules/FindOpenSSL.cmake
+++ b/Modules/FindOpenSSL.cmake
@@ -1,53 +1,54 @@
 # Distributed under the OSI-approved BSD 3-Clause License.  See accompanying
 # file Copyright.txt or https://cmake.org/licensing for details.
 
-#.rst:
-# FindOpenSSL
-# -----------
-#
-# Find the OpenSSL encryption library.
-#
-# Optional COMPONENTS
-# ^^^^^^^^^^^^^^^^^^^
-#
-# This module supports two optional COMPONENTS: ``Crypto`` and ``SSL``.  Both
-# components have associated imported targets, as described below.
-#
-# Imported Targets
-# ^^^^^^^^^^^^^^^^
-#
-# This module defines the following :prop_tgt:`IMPORTED` targets:
-#
-# ``OpenSSL::SSL``
-#   The OpenSSL ``ssl`` library, if found.
-# ``OpenSSL::Crypto``
-#   The OpenSSL ``crypto`` library, if found.
-#
-# Result Variables
-# ^^^^^^^^^^^^^^^^
-#
-# This module will set the following variables in your project:
-#
-# ``OPENSSL_FOUND``
-#   System has the OpenSSL library. If no components are requested it only
-#   requires the crypto library.
-# ``OPENSSL_INCLUDE_DIR``
-#   The OpenSSL include directory.
-# ``OPENSSL_CRYPTO_LIBRARY``
-#   The OpenSSL crypto library.
-# ``OPENSSL_SSL_LIBRARY``
-#   The OpenSSL SSL library.
-# ``OPENSSL_LIBRARIES``
-#   All OpenSSL libraries.
-# ``OPENSSL_VERSION``
-#   This is set to ``$major.$minor.$revision$patch`` (e.g. ``0.9.8s``).
-#
-# Hints
-# ^^^^^
-#
-# Set ``OPENSSL_ROOT_DIR`` to the root directory of an OpenSSL installation.
-# Set ``OPENSSL_USE_STATIC_LIBS`` to ``TRUE`` to look for static libraries.
-# Set ``OPENSSL_MSVC_STATIC_RT`` set ``TRUE`` to choose the MT version of the lib.
+#[=======================================================================[.rst:
+FindOpenSSL
+-----------
+
+Find the OpenSSL encryption library.
+
+Optional COMPONENTS
+^^^^^^^^^^^^^^^^^^^
+
+This module supports two optional COMPONENTS: ``Crypto`` and ``SSL``.  Both
+components have associated imported targets, as described below.
+
+Imported Targets
+^^^^^^^^^^^^^^^^
+
+This module defines the following :prop_tgt:`IMPORTED` targets:
+
+``OpenSSL::SSL``
+  The OpenSSL ``ssl`` library, if found.
+``OpenSSL::Crypto``
+  The OpenSSL ``crypto`` library, if found.
+
+Result Variables
+^^^^^^^^^^^^^^^^
+
+This module will set the following variables in your project:
+
+``OPENSSL_FOUND``
+  System has the OpenSSL library. If no components are requested it only
+  requires the crypto library.
+``OPENSSL_INCLUDE_DIR``
+  The OpenSSL include directory.
+``OPENSSL_CRYPTO_LIBRARY``
+  The OpenSSL crypto library.
+``OPENSSL_SSL_LIBRARY``
+  The OpenSSL SSL library.
+``OPENSSL_LIBRARIES``
+  All OpenSSL libraries.
+``OPENSSL_VERSION``
+  This is set to ``$major.$minor.$revision$patch`` (e.g. ``0.9.8s``).
+
+Hints
+^^^^^
+
+Set ``OPENSSL_ROOT_DIR`` to the root directory of an OpenSSL installation.
+Set ``OPENSSL_USE_STATIC_LIBS`` to ``TRUE`` to look for static libraries.
+Set ``OPENSSL_MSVC_STATIC_RT`` set ``TRUE`` to choose the MT version of the lib.
+#]=======================================================================]
 
 if (UNIX)
   find_package(PkgConfig QUIET)
diff --git a/Modules/FindOpenSceneGraph.cmake b/Modules/FindOpenSceneGraph.cmake
index 425aa45..6f7d3c8 100644
--- a/Modules/FindOpenSceneGraph.cmake
+++ b/Modules/FindOpenSceneGraph.cmake
@@ -1,102 +1,103 @@
 # Distributed under the OSI-approved BSD 3-Clause License.  See accompanying
 # file Copyright.txt or https://cmake.org/licensing for details.
 
-#.rst:
-# FindOpenSceneGraph
-# ------------------
-#
-# Find OpenSceneGraph
-#
-# This module searches for the OpenSceneGraph core "osg" library as well
-# as OpenThreads, and whatever additional COMPONENTS (nodekits) that you
-# specify.
-#
-# ::
-#
-#     See http://www.openscenegraph.org
-#
-#
-#
-# NOTE: To use this module effectively you must either require CMake >=
-# 2.6.3 with cmake_minimum_required(VERSION 2.6.3) or download and place
-# FindOpenThreads.cmake, Findosg_functions.cmake, Findosg.cmake, and
-# Find<etc>.cmake files into your CMAKE_MODULE_PATH.
-#
-# ==================================
-#
-# This module accepts the following variables (note mixed case)
-#
-# ::
-#
-#     OpenSceneGraph_DEBUG - Enable debugging output
-#
-#
-#
-# ::
-#
-#     OpenSceneGraph_MARK_AS_ADVANCED - Mark cache variables as advanced
-#                                       automatically
-#
-#
-#
-# The following environment variables are also respected for finding the
-# OSG and it's various components.  CMAKE_PREFIX_PATH can also be used
-# for this (see find_library() CMake documentation).
-#
-# ``<MODULE>_DIR``
-#   (where MODULE is of the form "OSGVOLUME" and there is a FindosgVolume.cmake file)
-# ``OSG_DIR``
-#   ..
-# ``OSGDIR``
-#   ..
-# ``OSG_ROOT``
-#   ..
-#
-#
-# [CMake 2.8.10]: The CMake variable OSG_DIR can now be used as well to
-# influence detection, instead of needing to specify an environment
-# variable.
-#
-# This module defines the following output variables:
-#
-# ::
-#
-#     OPENSCENEGRAPH_FOUND - Was the OSG and all of the specified components found?
-#
-#
-#
-# ::
-#
-#     OPENSCENEGRAPH_VERSION - The version of the OSG which was found
-#
-#
-#
-# ::
-#
-#     OPENSCENEGRAPH_INCLUDE_DIRS - Where to find the headers
-#
-#
-#
-# ::
-#
-#     OPENSCENEGRAPH_LIBRARIES - The OSG libraries
-#
-#
-#
-# ================================== Example Usage:
-#
-# ::
-#
-#   find_package(OpenSceneGraph 2.0.0 REQUIRED osgDB osgUtil)
-#       # libOpenThreads & libosg automatically searched
-#   include_directories(${OPENSCENEGRAPH_INCLUDE_DIRS})
-#
-#
-#
-# ::
-#
-#   add_executable(foo foo.cc)
-#   target_link_libraries(foo ${OPENSCENEGRAPH_LIBRARIES})
+#[=======================================================================[.rst:
+FindOpenSceneGraph
+------------------
+
+Find OpenSceneGraph
+
+This module searches for the OpenSceneGraph core "osg" library as well
+as OpenThreads, and whatever additional COMPONENTS (nodekits) that you
+specify.
+
+::
+
+    See http://www.openscenegraph.org
+
+
+
+NOTE: To use this module effectively you must either require CMake >=
+2.6.3 with cmake_minimum_required(VERSION 2.6.3) or download and place
+FindOpenThreads.cmake, Findosg_functions.cmake, Findosg.cmake, and
+Find<etc>.cmake files into your CMAKE_MODULE_PATH.
+
+==================================
+
+This module accepts the following variables (note mixed case)
+
+::
+
+    OpenSceneGraph_DEBUG - Enable debugging output
+
+
+
+::
+
+    OpenSceneGraph_MARK_AS_ADVANCED - Mark cache variables as advanced
+                                      automatically
+
+
+
+The following environment variables are also respected for finding the
+OSG and it's various components.  CMAKE_PREFIX_PATH can also be used
+for this (see find_library() CMake documentation).
+
+``<MODULE>_DIR``
+  (where MODULE is of the form "OSGVOLUME" and there is a FindosgVolume.cmake file)
+``OSG_DIR``
+  ..
+``OSGDIR``
+  ..
+``OSG_ROOT``
+  ..
+
+
+[CMake 2.8.10]: The CMake variable OSG_DIR can now be used as well to
+influence detection, instead of needing to specify an environment
+variable.
+
+This module defines the following output variables:
+
+::
+
+    OPENSCENEGRAPH_FOUND - Was the OSG and all of the specified components found?
+
+
+
+::
+
+    OPENSCENEGRAPH_VERSION - The version of the OSG which was found
+
+
+
+::
+
+    OPENSCENEGRAPH_INCLUDE_DIRS - Where to find the headers
+
+
+
+::
+
+    OPENSCENEGRAPH_LIBRARIES - The OSG libraries
+
+
+
+================================== Example Usage:
+
+::
+
+  find_package(OpenSceneGraph 2.0.0 REQUIRED osgDB osgUtil)
+      # libOpenThreads & libosg automatically searched
+  include_directories(${OPENSCENEGRAPH_INCLUDE_DIRS})
+
+
+
+::
+
+  add_executable(foo foo.cc)
+  target_link_libraries(foo ${OPENSCENEGRAPH_LIBRARIES})
+#]=======================================================================]
 
 #
 # Naming convention:
diff --git a/Modules/FindOpenThreads.cmake b/Modules/FindOpenThreads.cmake
index 91545e0..bc45eea 100644
--- a/Modules/FindOpenThreads.cmake
+++ b/Modules/FindOpenThreads.cmake
@@ -1,30 +1,31 @@
 # Distributed under the OSI-approved BSD 3-Clause License.  See accompanying
 # file Copyright.txt or https://cmake.org/licensing for details.
 
-#.rst:
-# FindOpenThreads
-# ---------------
-#
-#
-#
-# OpenThreads is a C++ based threading library.  Its largest userbase
-# seems to OpenSceneGraph so you might notice I accept OSGDIR as an
-# environment path.  I consider this part of the Findosg* suite used to
-# find OpenSceneGraph components.  Each component is separate and you
-# must opt in to each module.
-#
-# Locate OpenThreads This module defines OPENTHREADS_LIBRARY
-# OPENTHREADS_FOUND, if false, do not try to link to OpenThreads
-# OPENTHREADS_INCLUDE_DIR, where to find the headers
-#
-# $OPENTHREADS_DIR is an environment variable that would correspond to
-# the ./configure --prefix=$OPENTHREADS_DIR used in building osg.
-#
-# [CMake 2.8.10]: The CMake variables OPENTHREADS_DIR or OSG_DIR can now
-# be used as well to influence detection, instead of needing to specify
-# an environment variable.
-#
-# Created by Eric Wing.
+#[=======================================================================[.rst:
+FindOpenThreads
+---------------
+
+
+
+OpenThreads is a C++ based threading library.  Its largest userbase
+seems to OpenSceneGraph so you might notice I accept OSGDIR as an
+environment path.  I consider this part of the Findosg* suite used to
+find OpenSceneGraph components.  Each component is separate and you
+must opt in to each module.
+
+Locate OpenThreads This module defines OPENTHREADS_LIBRARY
+OPENTHREADS_FOUND, if false, do not try to link to OpenThreads
+OPENTHREADS_INCLUDE_DIR, where to find the headers
+
+$OPENTHREADS_DIR is an environment variable that would correspond to
+the ./configure --prefix=$OPENTHREADS_DIR used in building osg.
+
+[CMake 2.8.10]: The CMake variables OPENTHREADS_DIR or OSG_DIR can now
+be used as well to influence detection, instead of needing to specify
+an environment variable.
+
+Created by Eric Wing.
+#]=======================================================================]
 
 # Header files are presumed to be included like
 # #include <OpenThreads/Thread>
diff --git a/Modules/FindPHP4.cmake b/Modules/FindPHP4.cmake
index 426453b..34b4adb 100644
--- a/Modules/FindPHP4.cmake
+++ b/Modules/FindPHP4.cmake
@@ -1,20 +1,21 @@
 # Distributed under the OSI-approved BSD 3-Clause License.  See accompanying
 # file Copyright.txt or https://cmake.org/licensing for details.
 
-#.rst:
-# FindPHP4
-# --------
-#
-# Find PHP4
-#
-# This module finds if PHP4 is installed and determines where the
-# include files and libraries are.  It also determines what the name of
-# the library is.  This code sets the following variables:
-#
-# ::
-#
-#   PHP4_INCLUDE_PATH       = path to where php.h can be found
-#   PHP4_EXECUTABLE         = full path to the php4 binary
+#[=======================================================================[.rst:
+FindPHP4
+--------
+
+Find PHP4
+
+This module finds if PHP4 is installed and determines where the
+include files and libraries are.  It also determines what the name of
+the library is.  This code sets the following variables:
+
+::
+
+  PHP4_INCLUDE_PATH       = path to where php.h can be found
+  PHP4_EXECUTABLE         = full path to the php4 binary
+#]=======================================================================]
 
 set(PHP4_POSSIBLE_INCLUDE_PATHS
   /usr/include/php4
diff --git a/Modules/FindPNG.cmake b/Modules/FindPNG.cmake
index 936f01f..2208b48 100644
--- a/Modules/FindPNG.cmake
+++ b/Modules/FindPNG.cmake
@@ -1,49 +1,50 @@
 # Distributed under the OSI-approved BSD 3-Clause License.  See accompanying
 # file Copyright.txt or https://cmake.org/licensing for details.
 
-#.rst:
-# FindPNG
-# -------
-#
-# Find libpng, the official reference library for the PNG image format.
-#
-# Imported targets
-# ^^^^^^^^^^^^^^^^
-#
-# This module defines the following :prop_tgt:`IMPORTED` target:
-#
-# ``PNG::PNG``
-#   The libpng library, if found.
-#
-# Result variables
-# ^^^^^^^^^^^^^^^^
-#
-# This module will set the following variables in your project:
-#
-# ``PNG_INCLUDE_DIRS``
-#   where to find png.h, etc.
-# ``PNG_LIBRARIES``
-#   the libraries to link against to use PNG.
-# ``PNG_DEFINITIONS``
-#   You should add_definitions(${PNG_DEFINITIONS}) before compiling code
-#   that includes png library files.
-# ``PNG_FOUND``
-#   If false, do not try to use PNG.
-# ``PNG_VERSION_STRING``
-#   the version of the PNG library found (since CMake 2.8.8)
-#
-# Obsolete variables
-# ^^^^^^^^^^^^^^^^^^
-#
-# The following variables may also be set, for backwards compatibility:
-#
-# ``PNG_LIBRARY``
-#   where to find the PNG library.
-# ``PNG_INCLUDE_DIR``
-#   where to find the PNG headers (same as PNG_INCLUDE_DIRS)
-#
-# Since PNG depends on the ZLib compression library, none of the above
-# will be defined unless ZLib can be found.
+#[=======================================================================[.rst:
+FindPNG
+-------
+
+Find libpng, the official reference library for the PNG image format.
+
+Imported targets
+^^^^^^^^^^^^^^^^
+
+This module defines the following :prop_tgt:`IMPORTED` target:
+
+``PNG::PNG``
+  The libpng library, if found.
+
+Result variables
+^^^^^^^^^^^^^^^^
+
+This module will set the following variables in your project:
+
+``PNG_INCLUDE_DIRS``
+  where to find png.h, etc.
+``PNG_LIBRARIES``
+  the libraries to link against to use PNG.
+``PNG_DEFINITIONS``
+  You should add_definitions(${PNG_DEFINITIONS}) before compiling code
+  that includes png library files.
+``PNG_FOUND``
+  If false, do not try to use PNG.
+``PNG_VERSION_STRING``
+  the version of the PNG library found (since CMake 2.8.8)
+
+Obsolete variables
+^^^^^^^^^^^^^^^^^^
+
+The following variables may also be set, for backwards compatibility:
+
+``PNG_LIBRARY``
+  where to find the PNG library.
+``PNG_INCLUDE_DIR``
+  where to find the PNG headers (same as PNG_INCLUDE_DIRS)
+
+Since PNG depends on the ZLib compression library, none of the above
+will be defined unless ZLib can be found.
+#]=======================================================================]
 
 if(PNG_FIND_QUIETLY)
   set(_FIND_ZLIB_ARG QUIET)
diff --git a/Modules/FindPackageMessage.cmake b/Modules/FindPackageMessage.cmake
index 6821cee..1cdfde8 100644
--- a/Modules/FindPackageMessage.cmake
+++ b/Modules/FindPackageMessage.cmake
@@ -1,33 +1,34 @@
 # Distributed under the OSI-approved BSD 3-Clause License.  See accompanying
 # file Copyright.txt or https://cmake.org/licensing for details.
 
-#.rst:
-# FindPackageMessage
-# ------------------
-#
-#
-#
-# FIND_PACKAGE_MESSAGE(<name> "message for user" "find result details")
-#
-# This macro is intended to be used in FindXXX.cmake modules files.  It
-# will print a message once for each unique find result.  This is useful
-# for telling the user where a package was found.  The first argument
-# specifies the name (XXX) of the package.  The second argument
-# specifies the message to display.  The third argument lists details
-# about the find result so that if they change the message will be
-# displayed again.  The macro also obeys the QUIET argument to the
-# find_package command.
-#
-# Example:
-#
-# ::
-#
-#   if(X11_FOUND)
-#     FIND_PACKAGE_MESSAGE(X11 "Found X11: ${X11_X11_LIB}"
-#       "[${X11_X11_LIB}][${X11_INCLUDE_DIR}]")
-#   else()
-#    ...
-#   endif()
+#[=======================================================================[.rst:
+FindPackageMessage
+------------------
+
+
+
+FIND_PACKAGE_MESSAGE(<name> "message for user" "find result details")
+
+This macro is intended to be used in FindXXX.cmake modules files.  It
+will print a message once for each unique find result.  This is useful
+for telling the user where a package was found.  The first argument
+specifies the name (XXX) of the package.  The second argument
+specifies the message to display.  The third argument lists details
+about the find result so that if they change the message will be
+displayed again.  The macro also obeys the QUIET argument to the
+find_package command.
+
+Example:
+
+::
+
+  if(X11_FOUND)
+    FIND_PACKAGE_MESSAGE(X11 "Found X11: ${X11_X11_LIB}"
+      "[${X11_X11_LIB}][${X11_INCLUDE_DIR}]")
+  else()
+   ...
+  endif()
+#]=======================================================================]
 
 function(FIND_PACKAGE_MESSAGE pkg msg details)
   # Avoid printing a message repeatedly for the same find result.
diff --git a/Modules/FindPatch.cmake b/Modules/FindPatch.cmake
index 3ebcae9..4998839 100644
--- a/Modules/FindPatch.cmake
+++ b/Modules/FindPatch.cmake
@@ -1,30 +1,31 @@
 # Distributed under the OSI-approved BSD 3-Clause License.  See accompanying
 # file Copyright.txt or https://cmake.org/licensing for details.
 
-#.rst:
-# FindPatch
-# ---------
-#
-# The module defines the following variables:
-#
-# ``Patch_EXECUTABLE``
-#   Path to patch command-line executable.
-# ``Patch_FOUND``
-#   True if the patch command-line executable was found.
-#
-# The following :prop_tgt:`IMPORTED` targets are also defined:
-#
-# ``Patch::patch``
-#   The command-line executable.
-#
-# Example usage:
-#
-# .. code-block:: cmake
-#
-#    find_package(Patch)
-#    if(Patch_FOUND)
-#      message("Patch found: ${Patch_EXECUTABLE}")
-#    endif()
+#[=======================================================================[.rst:
+FindPatch
+---------
+
+The module defines the following variables:
+
+``Patch_EXECUTABLE``
+  Path to patch command-line executable.
+``Patch_FOUND``
+  True if the patch command-line executable was found.
+
+The following :prop_tgt:`IMPORTED` targets are also defined:
+
+``Patch::patch``
+  The command-line executable.
+
+Example usage:
+
+.. code-block:: cmake
+
+   find_package(Patch)
+   if(Patch_FOUND)
+     message("Patch found: ${Patch_EXECUTABLE}")
+   endif()
+#]=======================================================================]
 
 set(_doc "Patch command line executable")
 set(_patch_path )
diff --git a/Modules/FindPerl.cmake b/Modules/FindPerl.cmake
index c38527c..fd120bf 100644
--- a/Modules/FindPerl.cmake
+++ b/Modules/FindPerl.cmake
@@ -1,19 +1,20 @@
 # Distributed under the OSI-approved BSD 3-Clause License.  See accompanying
 # file Copyright.txt or https://cmake.org/licensing for details.
 
-#.rst:
-# FindPerl
-# --------
-#
-# Find perl
-#
-# this module looks for Perl
-#
-# ::
-#
-#   PERL_EXECUTABLE     - the full path to perl
-#   PERL_FOUND          - If false, don't attempt to use perl.
-#   PERL_VERSION_STRING - version of perl found (since CMake 2.8.8)
+#[=======================================================================[.rst:
+FindPerl
+--------
+
+Find perl
+
+this module looks for Perl
+
+::
+
+  PERL_EXECUTABLE     - the full path to perl
+  PERL_FOUND          - If false, don't attempt to use perl.
+  PERL_VERSION_STRING - version of perl found (since CMake 2.8.8)
+#]=======================================================================]
 
 include(${CMAKE_CURRENT_LIST_DIR}/FindCygwin.cmake)
 
diff --git a/Modules/FindPerlLibs.cmake b/Modules/FindPerlLibs.cmake
index 0b902e7..7e27f31 100644
--- a/Modules/FindPerlLibs.cmake
+++ b/Modules/FindPerlLibs.cmake
@@ -1,47 +1,48 @@
 # Distributed under the OSI-approved BSD 3-Clause License.  See accompanying
 # file Copyright.txt or https://cmake.org/licensing for details.
 
-#.rst:
-# FindPerlLibs
-# ------------
-#
-# Find Perl libraries
-#
-# This module finds if PERL is installed and determines where the
-# include files and libraries are.  It also determines what the name of
-# the library is.  This code sets the following variables:
-#
-# ::
-#
-#   PERLLIBS_FOUND    = True if perl.h & libperl were found
-#   PERL_INCLUDE_PATH = path to where perl.h is found
-#   PERL_LIBRARY      = path to libperl
-#   PERL_EXECUTABLE   = full path to the perl binary
-#
-#
-#
-# The minimum required version of Perl can be specified using the
-# standard syntax, e.g.  find_package(PerlLibs 6.0)
-#
-# ::
-#
-#   The following variables are also available if needed
-#   (introduced after CMake 2.6.4)
-#
-#
-#
-# ::
-#
-#   PERL_SITESEARCH     = path to the sitesearch install dir (-V:installsitesearch)
-#   PERL_SITEARCH       = path to the sitelib install directory (-V:installsitearch)
-#   PERL_SITELIB        = path to the sitelib install directory (-V:installsitelib)
-#   PERL_VENDORARCH     = path to the vendor arch install directory (-V:installvendorarch)
-#   PERL_VENDORLIB      = path to the vendor lib install directory (-V:installvendorlib)
-#   PERL_ARCHLIB        = path to the core arch lib install directory (-V:archlib)
-#   PERL_PRIVLIB        = path to the core priv lib install directory (-V:privlib)
-#   PERL_UPDATE_ARCHLIB = path to the update arch lib install directory (-V:installarchlib)
-#   PERL_UPDATE_PRIVLIB = path to the update priv lib install directory (-V:installprivlib)
-#   PERL_EXTRA_C_FLAGS = Compilation flags used to build perl
+#[=======================================================================[.rst:
+FindPerlLibs
+------------
+
+Find Perl libraries
+
+This module finds if PERL is installed and determines where the
+include files and libraries are.  It also determines what the name of
+the library is.  This code sets the following variables:
+
+::
+
+  PERLLIBS_FOUND    = True if perl.h & libperl were found
+  PERL_INCLUDE_PATH = path to where perl.h is found
+  PERL_LIBRARY      = path to libperl
+  PERL_EXECUTABLE   = full path to the perl binary
+
+
+
+The minimum required version of Perl can be specified using the
+standard syntax, e.g.  find_package(PerlLibs 6.0)
+
+::
+
+  The following variables are also available if needed
+  (introduced after CMake 2.6.4)
+
+
+
+::
+
+  PERL_SITESEARCH     = path to the sitesearch install dir (-V:installsitesearch)
+  PERL_SITEARCH       = path to the sitelib install directory (-V:installsitearch)
+  PERL_SITELIB        = path to the sitelib install directory (-V:installsitelib)
+  PERL_VENDORARCH     = path to the vendor arch install directory (-V:installvendorarch)
+  PERL_VENDORLIB      = path to the vendor lib install directory (-V:installvendorlib)
+  PERL_ARCHLIB        = path to the core arch lib install directory (-V:archlib)
+  PERL_PRIVLIB        = path to the core priv lib install directory (-V:privlib)
+  PERL_UPDATE_ARCHLIB = path to the update arch lib install directory (-V:installarchlib)
+  PERL_UPDATE_PRIVLIB = path to the update priv lib install directory (-V:installprivlib)
+  PERL_EXTRA_C_FLAGS = Compilation flags used to build perl
+#]=======================================================================]
 
 # find the perl executable
 include(${CMAKE_CURRENT_LIST_DIR}/FindPerl.cmake)
diff --git a/Modules/FindPhysFS.cmake b/Modules/FindPhysFS.cmake
index cfe9b0f..0366f77 100644
--- a/Modules/FindPhysFS.cmake
+++ b/Modules/FindPhysFS.cmake
@@ -1,20 +1,21 @@
 # Distributed under the OSI-approved BSD 3-Clause License.  See accompanying
 # file Copyright.txt or https://cmake.org/licensing for details.
 
-#.rst:
-# FindPhysFS
-# ----------
-#
-#
-#
-# Locate PhysFS library This module defines PHYSFS_LIBRARY, the name of
-# the library to link against PHYSFS_FOUND, if false, do not try to link
-# to PHYSFS PHYSFS_INCLUDE_DIR, where to find physfs.h
-#
-# $PHYSFSDIR is an environment variable that would correspond to the
-# ./configure --prefix=$PHYSFSDIR used in building PHYSFS.
-#
-# Created by Eric Wing.
+#[=======================================================================[.rst:
+FindPhysFS
+----------
+
+
+
+Locate PhysFS library This module defines PHYSFS_LIBRARY, the name of
+the library to link against PHYSFS_FOUND, if false, do not try to link
+to PHYSFS PHYSFS_INCLUDE_DIR, where to find physfs.h
+
+$PHYSFSDIR is an environment variable that would correspond to the
+./configure --prefix=$PHYSFSDIR used in building PHYSFS.
+
+Created by Eric Wing.
+#]=======================================================================]
 
 find_path(PHYSFS_INCLUDE_DIR physfs.h
   HINTS
diff --git a/Modules/FindPike.cmake b/Modules/FindPike.cmake
index ec71c94..b78db2a 100644
--- a/Modules/FindPike.cmake
+++ b/Modules/FindPike.cmake
@@ -1,20 +1,21 @@
 # Distributed under the OSI-approved BSD 3-Clause License.  See accompanying
 # file Copyright.txt or https://cmake.org/licensing for details.
 
-#.rst:
-# FindPike
-# --------
-#
-# Find Pike
-#
-# This module finds if PIKE is installed and determines where the
-# include files and libraries are.  It also determines what the name of
-# the library is.  This code sets the following variables:
-#
-# ::
-#
-#   PIKE_INCLUDE_PATH       = path to where program.h is found
-#   PIKE_EXECUTABLE         = full path to the pike binary
+#[=======================================================================[.rst:
+FindPike
+--------
+
+Find Pike
+
+This module finds if PIKE is installed and determines where the
+include files and libraries are.  It also determines what the name of
+the library is.  This code sets the following variables:
+
+::
+
+  PIKE_INCLUDE_PATH       = path to where program.h is found
+  PIKE_EXECUTABLE         = full path to the pike binary
+#]=======================================================================]
 
 find_path(PIKE_INCLUDE_PATH program.h
   ${PIKE_POSSIBLE_INCLUDE_PATHS}
diff --git a/Modules/FindPostgreSQL.cmake b/Modules/FindPostgreSQL.cmake
index 3f6fa6c..cb6265a 100644
--- a/Modules/FindPostgreSQL.cmake
+++ b/Modules/FindPostgreSQL.cmake
@@ -1,20 +1,21 @@
 # Distributed under the OSI-approved BSD 3-Clause License.  See accompanying
 # file Copyright.txt or https://cmake.org/licensing for details.
 
-#.rst:
-# FindPostgreSQL
-# --------------
-#
-# Find the PostgreSQL installation.
-#
-# This module defines
-#
-# ::
-#
-#   PostgreSQL_LIBRARIES - the PostgreSQL libraries needed for linking
-#   PostgreSQL_INCLUDE_DIRS - the directories of the PostgreSQL headers
-#   PostgreSQL_LIBRARY_DIRS  - the link directories for PostgreSQL libraries
-#   PostgreSQL_VERSION_STRING - the version of PostgreSQL found (since CMake 2.8.8)
+#[=======================================================================[.rst:
+FindPostgreSQL
+--------------
+
+Find the PostgreSQL installation.
+
+This module defines
+
+::
+
+  PostgreSQL_LIBRARIES - the PostgreSQL libraries needed for linking
+  PostgreSQL_INCLUDE_DIRS - the directories of the PostgreSQL headers
+  PostgreSQL_LIBRARY_DIRS  - the link directories for PostgreSQL libraries
+  PostgreSQL_VERSION_STRING - the version of PostgreSQL found (since CMake 2.8.8)
+#]=======================================================================]
 
 # ----------------------------------------------------------------------------
 # History:
diff --git a/Modules/FindProducer.cmake b/Modules/FindProducer.cmake
index 500c8ed..fba0494 100644
--- a/Modules/FindProducer.cmake
+++ b/Modules/FindProducer.cmake
@@ -1,35 +1,36 @@
 # Distributed under the OSI-approved BSD 3-Clause License.  See accompanying
 # file Copyright.txt or https://cmake.org/licensing for details.
 
-#.rst:
-# FindProducer
-# ------------
-#
-#
-#
-# Though Producer isn't directly part of OpenSceneGraph, its primary
-# user is OSG so I consider this part of the Findosg* suite used to find
-# OpenSceneGraph components.  You'll notice that I accept OSGDIR as an
-# environment path.
-#
-# Each component is separate and you must opt in to each module.  You
-# must also opt into OpenGL (and OpenThreads?) as these modules won't do
-# it for you.  This is to allow you control over your own system piece
-# by piece in case you need to opt out of certain components or change
-# the Find behavior for a particular module (perhaps because the default
-# FindOpenGL.cmake module doesn't work with your system as an example).
-# If you want to use a more convenient module that includes everything,
-# use the FindOpenSceneGraph.cmake instead of the Findosg*.cmake
-# modules.
-#
-# Locate Producer This module defines PRODUCER_LIBRARY PRODUCER_FOUND,
-# if false, do not try to link to Producer PRODUCER_INCLUDE_DIR, where
-# to find the headers
-#
-# $PRODUCER_DIR is an environment variable that would correspond to the
-# ./configure --prefix=$PRODUCER_DIR used in building osg.
-#
-# Created by Eric Wing.
+#[=======================================================================[.rst:
+FindProducer
+------------
+
+
+
+Though Producer isn't directly part of OpenSceneGraph, its primary
+user is OSG so I consider this part of the Findosg* suite used to find
+OpenSceneGraph components.  You'll notice that I accept OSGDIR as an
+environment path.
+
+Each component is separate and you must opt in to each module.  You
+must also opt into OpenGL (and OpenThreads?) as these modules won't do
+it for you.  This is to allow you control over your own system piece
+by piece in case you need to opt out of certain components or change
+the Find behavior for a particular module (perhaps because the default
+FindOpenGL.cmake module doesn't work with your system as an example).
+If you want to use a more convenient module that includes everything,
+use the FindOpenSceneGraph.cmake instead of the Findosg*.cmake
+modules.
+
+Locate Producer This module defines PRODUCER_LIBRARY PRODUCER_FOUND,
+if false, do not try to link to Producer PRODUCER_INCLUDE_DIR, where
+to find the headers
+
+$PRODUCER_DIR is an environment variable that would correspond to the
+./configure --prefix=$PRODUCER_DIR used in building osg.
+
+Created by Eric Wing.
+#]=======================================================================]
 
 # Header files are presumed to be included like
 # #include <Producer/CameraGroup>
diff --git a/Modules/FindProtobuf.cmake b/Modules/FindProtobuf.cmake
index d6d1ec6..1fc2167 100644
--- a/Modules/FindProtobuf.cmake
+++ b/Modules/FindProtobuf.cmake
@@ -1,123 +1,124 @@
 # Distributed under the OSI-approved BSD 3-Clause License.  See accompanying
 # file Copyright.txt or https://cmake.org/licensing for details.
 
-#.rst:
-# FindProtobuf
-# ------------
-#
-# Locate and configure the Google Protocol Buffers library.
-#
-# The following variables can be set and are optional:
-#
-# ``Protobuf_SRC_ROOT_FOLDER``
-#   When compiling with MSVC, if this cache variable is set
-#   the protobuf-default VS project build locations
-#   (vsprojects/Debug and vsprojects/Release
-#   or vsprojects/x64/Debug and vsprojects/x64/Release)
-#   will be searched for libraries and binaries.
-# ``Protobuf_IMPORT_DIRS``
-#   List of additional directories to be searched for
-#   imported .proto files.
-# ``Protobuf_DEBUG``
-#   Show debug messages.
-# ``Protobuf_USE_STATIC_LIBS``
-#   Set to ON to force the use of the static libraries.
-#   Default is OFF.
-#
-# Defines the following variables:
-#
-# ``Protobuf_FOUND``
-#   Found the Google Protocol Buffers library
-#   (libprotobuf & header files)
-# ``Protobuf_VERSION``
-#   Version of package found.
-# ``Protobuf_INCLUDE_DIRS``
-#   Include directories for Google Protocol Buffers
-# ``Protobuf_LIBRARIES``
-#   The protobuf libraries
-# ``Protobuf_PROTOC_LIBRARIES``
-#   The protoc libraries
-# ``Protobuf_LITE_LIBRARIES``
-#   The protobuf-lite libraries
-#
-# The following :prop_tgt:`IMPORTED` targets are also defined:
-#
-# ``protobuf::libprotobuf``
-#   The protobuf library.
-# ``protobuf::libprotobuf-lite``
-#   The protobuf lite library.
-# ``protobuf::libprotoc``
-#   The protoc library.
-# ``protobuf::protoc``
-#   The protoc compiler.
-#
-# The following cache variables are also available to set or use:
-#
-# ``Protobuf_LIBRARY``
-#   The protobuf library
-# ``Protobuf_PROTOC_LIBRARY``
-#   The protoc library
-# ``Protobuf_INCLUDE_DIR``
-#   The include directory for protocol buffers
-# ``Protobuf_PROTOC_EXECUTABLE``
-#   The protoc compiler
-# ``Protobuf_LIBRARY_DEBUG``
-#   The protobuf library (debug)
-# ``Protobuf_PROTOC_LIBRARY_DEBUG``
-#   The protoc library (debug)
-# ``Protobuf_LITE_LIBRARY``
-#   The protobuf lite library
-# ``Protobuf_LITE_LIBRARY_DEBUG``
-#   The protobuf lite library (debug)
-#
-# Example:
-#
-# .. code-block:: cmake
-#
-#   find_package(Protobuf REQUIRED)
-#   include_directories(${Protobuf_INCLUDE_DIRS})
-#   include_directories(${CMAKE_CURRENT_BINARY_DIR})
-#   protobuf_generate_cpp(PROTO_SRCS PROTO_HDRS foo.proto)
-#   protobuf_generate_cpp(PROTO_SRCS PROTO_HDRS EXPORT_MACRO DLL_EXPORT foo.proto)
-#   protobuf_generate_cpp(PROTO_SRCS PROTO_HDRS DESCRIPTORS PROTO_DESCS foo.proto)
-#   protobuf_generate_python(PROTO_PY foo.proto)
-#   add_executable(bar bar.cc ${PROTO_SRCS} ${PROTO_HDRS})
-#   target_link_libraries(bar ${Protobuf_LIBRARIES})
-#
-# .. note::
-#   The ``protobuf_generate_cpp`` and ``protobuf_generate_python``
-#   functions and :command:`add_executable` or :command:`add_library`
-#   calls only work properly within the same directory.
-#
-# .. command:: protobuf_generate_cpp
-#
-#   Add custom commands to process ``.proto`` files to C++::
-#
-#     protobuf_generate_cpp (<SRCS> <HDRS>
-#         [DESCRIPTORS <DESC>] [EXPORT_MACRO <MACRO>] [<ARGN>...])
-#
-#   ``SRCS``
-#     Variable to define with autogenerated source files
-#   ``HDRS``
-#     Variable to define with autogenerated header files
-#   ``DESCRIPTORS``
-#     Variable to define with autogenerated descriptor files, if requested.
-#   ``EXPORT_MACRO``
-#     is a macro which should expand to ``__declspec(dllexport)`` or
-#     ``__declspec(dllimport)`` depending on what is being compiled.
-#   ``ARGN``
-#     ``.proto`` files
-#
-# .. command:: protobuf_generate_python
-#
-#   Add custom commands to process ``.proto`` files to Python::
-#
-#     protobuf_generate_python (<PY> [<ARGN>...])
-#
-#   ``PY``
-#     Variable to define with autogenerated Python files
-#   ``ARGN``
-#     ``.proto`` filess
+#[=======================================================================[.rst:
+FindProtobuf
+------------
+
+Locate and configure the Google Protocol Buffers library.
+
+The following variables can be set and are optional:
+
+``Protobuf_SRC_ROOT_FOLDER``
+  When compiling with MSVC, if this cache variable is set
+  the protobuf-default VS project build locations
+  (vsprojects/Debug and vsprojects/Release
+  or vsprojects/x64/Debug and vsprojects/x64/Release)
+  will be searched for libraries and binaries.
+``Protobuf_IMPORT_DIRS``
+  List of additional directories to be searched for
+  imported .proto files.
+``Protobuf_DEBUG``
+  Show debug messages.
+``Protobuf_USE_STATIC_LIBS``
+  Set to ON to force the use of the static libraries.
+  Default is OFF.
+
+Defines the following variables:
+
+``Protobuf_FOUND``
+  Found the Google Protocol Buffers library
+  (libprotobuf & header files)
+``Protobuf_VERSION``
+  Version of package found.
+``Protobuf_INCLUDE_DIRS``
+  Include directories for Google Protocol Buffers
+``Protobuf_LIBRARIES``
+  The protobuf libraries
+``Protobuf_PROTOC_LIBRARIES``
+  The protoc libraries
+``Protobuf_LITE_LIBRARIES``
+  The protobuf-lite libraries
+
+The following :prop_tgt:`IMPORTED` targets are also defined:
+
+``protobuf::libprotobuf``
+  The protobuf library.
+``protobuf::libprotobuf-lite``
+  The protobuf lite library.
+``protobuf::libprotoc``
+  The protoc library.
+``protobuf::protoc``
+  The protoc compiler.
+
+The following cache variables are also available to set or use:
+
+``Protobuf_LIBRARY``
+  The protobuf library
+``Protobuf_PROTOC_LIBRARY``
+  The protoc library
+``Protobuf_INCLUDE_DIR``
+  The include directory for protocol buffers
+``Protobuf_PROTOC_EXECUTABLE``
+  The protoc compiler
+``Protobuf_LIBRARY_DEBUG``
+  The protobuf library (debug)
+``Protobuf_PROTOC_LIBRARY_DEBUG``
+  The protoc library (debug)
+``Protobuf_LITE_LIBRARY``
+  The protobuf lite library
+``Protobuf_LITE_LIBRARY_DEBUG``
+  The protobuf lite library (debug)
+
+Example:
+
+.. code-block:: cmake
+
+  find_package(Protobuf REQUIRED)
+  include_directories(${Protobuf_INCLUDE_DIRS})
+  include_directories(${CMAKE_CURRENT_BINARY_DIR})
+  protobuf_generate_cpp(PROTO_SRCS PROTO_HDRS foo.proto)
+  protobuf_generate_cpp(PROTO_SRCS PROTO_HDRS EXPORT_MACRO DLL_EXPORT foo.proto)
+  protobuf_generate_cpp(PROTO_SRCS PROTO_HDRS DESCRIPTORS PROTO_DESCS foo.proto)
+  protobuf_generate_python(PROTO_PY foo.proto)
+  add_executable(bar bar.cc ${PROTO_SRCS} ${PROTO_HDRS})
+  target_link_libraries(bar ${Protobuf_LIBRARIES})
+
+.. note::
+  The ``protobuf_generate_cpp`` and ``protobuf_generate_python``
+  functions and :command:`add_executable` or :command:`add_library`
+  calls only work properly within the same directory.
+
+.. command:: protobuf_generate_cpp
+
+  Add custom commands to process ``.proto`` files to C++::
+
+    protobuf_generate_cpp (<SRCS> <HDRS>
+        [DESCRIPTORS <DESC>] [EXPORT_MACRO <MACRO>] [<ARGN>...])
+
+  ``SRCS``
+    Variable to define with autogenerated source files
+  ``HDRS``
+    Variable to define with autogenerated header files
+  ``DESCRIPTORS``
+    Variable to define with autogenerated descriptor files, if requested.
+  ``EXPORT_MACRO``
+    is a macro which should expand to ``__declspec(dllexport)`` or
+    ``__declspec(dllimport)`` depending on what is being compiled.
+  ``ARGN``
+    ``.proto`` files
+
+.. command:: protobuf_generate_python
+
+  Add custom commands to process ``.proto`` files to Python::
+
+    protobuf_generate_python (<PY> [<ARGN>...])
+
+  ``PY``
+    Variable to define with autogenerated Python files
+  ``ARGN``
+    ``.proto`` filess
+#]=======================================================================]
 
 function(protobuf_generate)
   include(CMakeParseArguments)
diff --git a/Modules/FindPythonInterp.cmake b/Modules/FindPythonInterp.cmake
index 370e5e42..6a47c15 100644
--- a/Modules/FindPythonInterp.cmake
+++ b/Modules/FindPythonInterp.cmake
@@ -1,44 +1,45 @@
 # Distributed under the OSI-approved BSD 3-Clause License.  See accompanying
 # file Copyright.txt or https://cmake.org/licensing for details.
 
-#.rst:
-# FindPythonInterp
-# ----------------
-#
-# Find python interpreter
-#
-# .. deprecated:: 3.12
-#
-#   Use :module:`FindPython3`, :module:`FindPython2` or :module:`FindPython` instead.
-#
-# This module finds if Python interpreter is installed and determines
-# where the executables are.  This code sets the following variables:
-#
-# ::
-#
-#   PYTHONINTERP_FOUND         - Was the Python executable found
-#   PYTHON_EXECUTABLE          - path to the Python interpreter
-#
-#
-#
-# ::
-#
-#   PYTHON_VERSION_STRING      - Python version found e.g. 2.5.2
-#   PYTHON_VERSION_MAJOR       - Python major version found e.g. 2
-#   PYTHON_VERSION_MINOR       - Python minor version found e.g. 5
-#   PYTHON_VERSION_PATCH       - Python patch version found e.g. 2
-#
-#
-#
-# The Python_ADDITIONAL_VERSIONS variable can be used to specify a list
-# of version numbers that should be taken into account when searching
-# for Python.  You need to set this variable before calling
-# find_package(PythonInterp).
-#
-# If calling both ``find_package(PythonInterp)`` and
-# ``find_package(PythonLibs)``, call ``find_package(PythonInterp)`` first to
-# get the currently active Python version by default with a consistent version
-# of PYTHON_LIBRARIES.
+#[=======================================================================[.rst:
+FindPythonInterp
+----------------
+
+Find python interpreter
+
+.. deprecated:: 3.12
+
+  Use :module:`FindPython3`, :module:`FindPython2` or :module:`FindPython` instead.
+
+This module finds if Python interpreter is installed and determines
+where the executables are.  This code sets the following variables:
+
+::
+
+  PYTHONINTERP_FOUND         - Was the Python executable found
+  PYTHON_EXECUTABLE          - path to the Python interpreter
+
+
+
+::
+
+  PYTHON_VERSION_STRING      - Python version found e.g. 2.5.2
+  PYTHON_VERSION_MAJOR       - Python major version found e.g. 2
+  PYTHON_VERSION_MINOR       - Python minor version found e.g. 5
+  PYTHON_VERSION_PATCH       - Python patch version found e.g. 2
+
+
+
+The Python_ADDITIONAL_VERSIONS variable can be used to specify a list
+of version numbers that should be taken into account when searching
+for Python.  You need to set this variable before calling
+find_package(PythonInterp).
+
+If calling both ``find_package(PythonInterp)`` and
+``find_package(PythonLibs)``, call ``find_package(PythonInterp)`` first to
+get the currently active Python version by default with a consistent version
+of PYTHON_LIBRARIES.
+#]=======================================================================]
 
 unset(_Python_NAMES)
 
diff --git a/Modules/FindPythonLibs.cmake b/Modules/FindPythonLibs.cmake
index 6da87a8..2be5d71 100644
--- a/Modules/FindPythonLibs.cmake
+++ b/Modules/FindPythonLibs.cmake
@@ -1,48 +1,49 @@
 # Distributed under the OSI-approved BSD 3-Clause License.  See accompanying
 # file Copyright.txt or https://cmake.org/licensing for details.
 
-#.rst:
-# FindPythonLibs
-# --------------
-#
-# Find python libraries
-#
-# .. deprecated:: 3.12
-#
-#   Use :module:`FindPython3`, :module:`FindPython2` or :module:`FindPython` instead.
-#
-# This module finds if Python is installed and determines where the
-# include files and libraries are.  It also determines what the name of
-# the library is.  This code sets the following variables:
-#
-# ::
-#
-#   PYTHONLIBS_FOUND           - have the Python libs been found
-#   PYTHON_LIBRARIES           - path to the python library
-#   PYTHON_INCLUDE_PATH        - path to where Python.h is found (deprecated)
-#   PYTHON_INCLUDE_DIRS        - path to where Python.h is found
-#   PYTHON_DEBUG_LIBRARIES     - path to the debug library (deprecated)
-#   PYTHONLIBS_VERSION_STRING  - version of the Python libs found (since CMake 2.8.8)
-#
-#
-#
-# The Python_ADDITIONAL_VERSIONS variable can be used to specify a list
-# of version numbers that should be taken into account when searching
-# for Python.  You need to set this variable before calling
-# find_package(PythonLibs).
-#
-# If you'd like to specify the installation of Python to use, you should
-# modify the following cache variables:
-#
-# ::
-#
-#   PYTHON_LIBRARY             - path to the python library
-#   PYTHON_INCLUDE_DIR         - path to where Python.h is found
-#
-# If calling both ``find_package(PythonInterp)`` and
-# ``find_package(PythonLibs)``, call ``find_package(PythonInterp)`` first to
-# get the currently active Python version by default with a consistent version
-# of PYTHON_LIBRARIES.
+#[=======================================================================[.rst:
+FindPythonLibs
+--------------
+
+Find python libraries
+
+.. deprecated:: 3.12
+
+  Use :module:`FindPython3`, :module:`FindPython2` or :module:`FindPython` instead.
+
+This module finds if Python is installed and determines where the
+include files and libraries are.  It also determines what the name of
+the library is.  This code sets the following variables:
+
+::
+
+  PYTHONLIBS_FOUND           - have the Python libs been found
+  PYTHON_LIBRARIES           - path to the python library
+  PYTHON_INCLUDE_PATH        - path to where Python.h is found (deprecated)
+  PYTHON_INCLUDE_DIRS        - path to where Python.h is found
+  PYTHON_DEBUG_LIBRARIES     - path to the debug library (deprecated)
+  PYTHONLIBS_VERSION_STRING  - version of the Python libs found (since CMake 2.8.8)
+
+
+
+The Python_ADDITIONAL_VERSIONS variable can be used to specify a list
+of version numbers that should be taken into account when searching
+for Python.  You need to set this variable before calling
+find_package(PythonLibs).
+
+If you'd like to specify the installation of Python to use, you should
+modify the following cache variables:
+
+::
+
+  PYTHON_LIBRARY             - path to the python library
+  PYTHON_INCLUDE_DIR         - path to where Python.h is found
+
+If calling both ``find_package(PythonInterp)`` and
+``find_package(PythonLibs)``, call ``find_package(PythonInterp)`` first to
+get the currently active Python version by default with a consistent version
+of PYTHON_LIBRARIES.
+#]=======================================================================]
 
 # Use the executable's path as a hint
 set(_Python_LIBRARY_PATH_HINT)
diff --git a/Modules/FindQt.cmake b/Modules/FindQt.cmake
index 4dff7c3..083d6a6 100644
--- a/Modules/FindQt.cmake
+++ b/Modules/FindQt.cmake
@@ -1,37 +1,38 @@
 # Distributed under the OSI-approved BSD 3-Clause License.  See accompanying
 # file Copyright.txt or https://cmake.org/licensing for details.
 
-#.rst:
-# FindQt
-# ------
-#
-# Searches for all installed versions of Qt3 or Qt4.
-#
-# This module cannot handle Qt5 or any later versions.
-# For those, see :manual:`cmake-qt(7)`.
-#
-# This module should only be used if your project can work with multiple
-# versions of Qt.  If not, you should just directly use FindQt4 or
-# FindQt3.  If multiple versions of Qt are found on the machine, then
-# The user must set the option DESIRED_QT_VERSION to the version they
-# want to use.  If only one version of qt is found on the machine, then
-# the DESIRED_QT_VERSION is set to that version and the matching FindQt3
-# or FindQt4 module is included.  Once the user sets DESIRED_QT_VERSION,
-# then the FindQt3 or FindQt4 module is included.
-#
-# ::
-#
-#   QT_REQUIRED if this is set to TRUE then if CMake can
-#               not find Qt4 or Qt3 an error is raised
-#               and a message is sent to the user.
-#
-#
-#
-# ::
-#
-#   DESIRED_QT_VERSION OPTION is created
-#   QT4_INSTALLED is set to TRUE if qt4 is found.
-#   QT3_INSTALLED is set to TRUE if qt3 is found.
+#[=======================================================================[.rst:
+FindQt
+------
+
+Searches for all installed versions of Qt3 or Qt4.
+
+This module cannot handle Qt5 or any later versions.
+For those, see :manual:`cmake-qt(7)`.
+
+This module should only be used if your project can work with multiple
+versions of Qt.  If not, you should just directly use FindQt4 or
+FindQt3.  If multiple versions of Qt are found on the machine, then
+The user must set the option DESIRED_QT_VERSION to the version they
+want to use.  If only one version of qt is found on the machine, then
+the DESIRED_QT_VERSION is set to that version and the matching FindQt3
+or FindQt4 module is included.  Once the user sets DESIRED_QT_VERSION,
+then the FindQt3 or FindQt4 module is included.
+
+::
+
+  QT_REQUIRED if this is set to TRUE then if CMake can
+              not find Qt4 or Qt3 an error is raised
+              and a message is sent to the user.
+
+
+
+::
+
+  DESIRED_QT_VERSION OPTION is created
+  QT4_INSTALLED is set to TRUE if qt4 is found.
+  QT3_INSTALLED is set to TRUE if qt3 is found.
+#]=======================================================================]
 
 # look for signs of qt3 installations
 file(GLOB GLOB_TEMP_VAR /usr/lib*/qt-3*/bin/qmake /usr/lib*/qt3*/bin/qmake)
diff --git a/Modules/FindQt3.cmake b/Modules/FindQt3.cmake
index a034210..4a8e28b 100644
--- a/Modules/FindQt3.cmake
+++ b/Modules/FindQt3.cmake
@@ -1,37 +1,38 @@
 # Distributed under the OSI-approved BSD 3-Clause License.  See accompanying
 # file Copyright.txt or https://cmake.org/licensing for details.
 
-#.rst:
-# FindQt3
-# -------
-#
-# Locate Qt include paths and libraries
-#
-# This module defines:
-#
-# ::
-#
-#   QT_INCLUDE_DIR    - where to find qt.h, etc.
-#   QT_LIBRARIES      - the libraries to link against to use Qt.
-#   QT_DEFINITIONS    - definitions to use when
-#                       compiling code that uses Qt.
-#   QT_FOUND          - If false, don't try to use Qt.
-#   QT_VERSION_STRING - the version of Qt found
-#
-#
-#
-# If you need the multithreaded version of Qt, set QT_MT_REQUIRED to
-# TRUE
-#
-# Also defined, but not for general use are:
-#
-# ::
-#
-#   QT_MOC_EXECUTABLE, where to find the moc tool.
-#   QT_UIC_EXECUTABLE, where to find the uic tool.
-#   QT_QT_LIBRARY, where to find the Qt library.
-#   QT_QTMAIN_LIBRARY, where to find the qtmain
-#    library. This is only required by Qt3 on Windows.
+#[=======================================================================[.rst:
+FindQt3
+-------
+
+Locate Qt include paths and libraries
+
+This module defines:
+
+::
+
+  QT_INCLUDE_DIR    - where to find qt.h, etc.
+  QT_LIBRARIES      - the libraries to link against to use Qt.
+  QT_DEFINITIONS    - definitions to use when
+                      compiling code that uses Qt.
+  QT_FOUND          - If false, don't try to use Qt.
+  QT_VERSION_STRING - the version of Qt found
+
+
+
+If you need the multithreaded version of Qt, set QT_MT_REQUIRED to
+TRUE
+
+Also defined, but not for general use are:
+
+::
+
+  QT_MOC_EXECUTABLE, where to find the moc tool.
+  QT_UIC_EXECUTABLE, where to find the uic tool.
+  QT_QT_LIBRARY, where to find the Qt library.
+  QT_QTMAIN_LIBRARY, where to find the qtmain
+   library. This is only required by Qt3 on Windows.
+#]=======================================================================]
 
 # These are around for backwards compatibility
 # they will be set
diff --git a/Modules/FindQt4.cmake b/Modules/FindQt4.cmake
index 847a798..a145b46 100644
--- a/Modules/FindQt4.cmake
+++ b/Modules/FindQt4.cmake
@@ -1,304 +1,305 @@
 # Distributed under the OSI-approved BSD 3-Clause License.  See accompanying
 # file Copyright.txt or https://cmake.org/licensing for details.
 
-#.rst:
-# FindQt4
-# -------
-#
-# Finding and Using Qt4
-# ^^^^^^^^^^^^^^^^^^^^^
-#
-# This module can be used to find Qt4.  The most important issue is that
-# the Qt4 qmake is available via the system path.  This qmake is then
-# used to detect basically everything else.  This module defines a
-# number of :prop_tgt:`IMPORTED` targets, macros and variables.
-#
-# Typical usage could be something like:
-#
-# .. code-block:: cmake
-#
-#    set(CMAKE_AUTOMOC ON)
-#    set(CMAKE_INCLUDE_CURRENT_DIR ON)
-#    find_package(Qt4 4.4.3 REQUIRED QtGui QtXml)
-#    add_executable(myexe main.cpp)
-#    target_link_libraries(myexe Qt4::QtGui Qt4::QtXml)
-#
-# .. note::
-#
-#  When using :prop_tgt:`IMPORTED` targets, the qtmain.lib static library is
-#  automatically linked on Windows for :prop_tgt:`WIN32 <WIN32_EXECUTABLE>`
-#  executables. To disable that globally, set the
-#  ``QT4_NO_LINK_QTMAIN`` variable before finding Qt4. To disable that
-#  for a particular executable, set the ``QT4_NO_LINK_QTMAIN`` target
-#  property to ``TRUE`` on the executable.
-#
-# Qt Build Tools
-# ^^^^^^^^^^^^^^
-#
-# Qt relies on some bundled tools for code generation, such as ``moc`` for
-# meta-object code generation,``uic`` for widget layout and population,
-# and ``rcc`` for virtual filesystem content generation.  These tools may be
-# automatically invoked by :manual:`cmake(1)` if the appropriate conditions
-# are met.  See :manual:`cmake-qt(7)` for more.
-#
-# Qt Macros
-# ^^^^^^^^^
-#
-# In some cases it can be necessary or useful to invoke the Qt build tools in a
-# more-manual way. Several macros are available to add targets for such uses.
-#
-# ::
-#
-#   macro QT4_WRAP_CPP(outfiles inputfile ... [TARGET tgt] OPTIONS ...)
-#         create moc code from a list of files containing Qt class with
-#         the Q_OBJECT declaration.  Per-directory preprocessor definitions
-#         are also added.  If the <tgt> is specified, the
-#         INTERFACE_INCLUDE_DIRECTORIES and INTERFACE_COMPILE_DEFINITIONS from
-#         the <tgt> are passed to moc.  Options may be given to moc, such as
-#         those found when executing "moc -help".
-#
-#
-# ::
-#
-#   macro QT4_WRAP_UI(outfiles inputfile ... OPTIONS ...)
-#         create code from a list of Qt designer ui files.
-#         Options may be given to uic, such as those found
-#         when executing "uic -help"
-#
-#
-# ::
-#
-#   macro QT4_ADD_RESOURCES(outfiles inputfile ... OPTIONS ...)
-#         create code from a list of Qt resource files.
-#         Options may be given to rcc, such as those found
-#         when executing "rcc -help"
-#
-#
-# ::
-#
-#   macro QT4_GENERATE_MOC(inputfile outputfile [TARGET tgt])
-#         creates a rule to run moc on infile and create outfile.
-#         Use this if for some reason QT4_WRAP_CPP() isn't appropriate, e.g.
-#         because you need a custom filename for the moc file or something
-#         similar.  If the <tgt> is specified, the
-#         INTERFACE_INCLUDE_DIRECTORIES and INTERFACE_COMPILE_DEFINITIONS from
-#         the <tgt> are passed to moc.
-#
-#
-# ::
-#
-#   macro QT4_ADD_DBUS_INTERFACE(outfiles interface basename)
-#         Create the interface header and implementation files with the
-#         given basename from the given interface xml file and add it to
-#         the list of sources.
-#
-#         You can pass additional parameters to the qdbusxml2cpp call by setting
-#         properties on the input file:
-#
-#         INCLUDE the given file will be included in the generate interface header
-#
-#         CLASSNAME the generated class is named accordingly
-#
-#         NO_NAMESPACE the generated class is not wrapped in a namespace
-#
-#
-# ::
-#
-#   macro QT4_ADD_DBUS_INTERFACES(outfiles inputfile ... )
-#         Create the interface header and implementation files
-#         for all listed interface xml files.
-#         The basename will be automatically determined from the name
-#         of the xml file.
-#
-#         The source file properties described for
-#         QT4_ADD_DBUS_INTERFACE also apply here.
-#
-#
-# ::
-#
-#   macro QT4_ADD_DBUS_ADAPTOR(outfiles xmlfile parentheader parentclassname
-#                              [basename] [classname])
-#         create a dbus adaptor (header and implementation file) from the xml file
-#         describing the interface, and add it to the list of sources. The adaptor
-#         forwards the calls to a parent class, defined in parentheader and named
-#         parentclassname. The name of the generated files will be
-#         <basename>adaptor.{cpp,h} where basename defaults to the basename of the
-#         xml file.
-#         If <classname> is provided, then it will be used as the classname of the
-#         adaptor itself.
-#
-#
-# ::
-#
-#   macro QT4_GENERATE_DBUS_INTERFACE( header [interfacename] OPTIONS ...)
-#         generate the xml interface file from the given header.
-#         If the optional argument interfacename is omitted, the name of the
-#         interface file is constructed from the basename of the header with
-#         the suffix .xml appended.
-#         Options may be given to qdbuscpp2xml, such as those found when
-#         executing "qdbuscpp2xml --help"
-#
-#
-# ::
-#
-#   macro QT4_CREATE_TRANSLATION( qm_files directories ... sources ...
-#                                 ts_files ... OPTIONS ...)
-#         out: qm_files
-#         in:  directories sources ts_files
-#         options: flags to pass to lupdate, such as -extensions to specify
-#         extensions for a directory scan.
-#         generates commands to create .ts (vie lupdate) and .qm
-#         (via lrelease) - files from directories and/or sources. The ts files are
-#         created and/or updated in the source tree (unless given with full paths).
-#         The qm files are generated in the build tree.
-#         Updating the translations can be done by adding the qm_files
-#         to the source list of your library/executable, so they are
-#         always updated, or by adding a custom target to control when
-#         they get updated/generated.
-#
-#
-# ::
-#
-#   macro QT4_ADD_TRANSLATION( qm_files ts_files ... )
-#         out: qm_files
-#         in:  ts_files
-#         generates commands to create .qm from .ts - files. The generated
-#         filenames can be found in qm_files. The ts_files
-#         must exist and are not updated in any way.
-#
-#
-# ::
-#
-#   macro QT4_AUTOMOC(sourcefile1 sourcefile2 ... [TARGET tgt])
-#         The qt4_automoc macro is obsolete.  Use the CMAKE_AUTOMOC feature instead.
-#         This macro is still experimental.
-#         It can be used to have moc automatically handled.
-#         So if you have the files foo.h and foo.cpp, and in foo.h a
-#         a class uses the Q_OBJECT macro, moc has to run on it. If you don't
-#         want to use QT4_WRAP_CPP() (which is reliable and mature), you can insert
-#         #include "foo.moc"
-#         in foo.cpp and then give foo.cpp as argument to QT4_AUTOMOC(). This will
-#         scan all listed files at cmake-time for such included moc files and if it
-#         finds them cause a rule to be generated to run moc at build time on the
-#         accompanying header file foo.h.
-#         If a source file has the SKIP_AUTOMOC property set it will be ignored by
-#         this macro.
-#         If the <tgt> is specified, the INTERFACE_INCLUDE_DIRECTORIES and
-#         INTERFACE_COMPILE_DEFINITIONS from the <tgt> are passed to moc.
-#
-#
-# ::
-#
-#  function QT4_USE_MODULES( target [link_type] modules...)
-#         This function is obsolete. Use target_link_libraries with IMPORTED targets
-#         instead.
-#         Make <target> use the <modules> from Qt. Using a Qt module means
-#         to link to the library, add the relevant include directories for the
-#         module, and add the relevant compiler defines for using the module.
-#         Modules are roughly equivalent to components of Qt4, so usage would be
-#         something like:
-#          qt4_use_modules(myexe Core Gui Declarative)
-#         to use QtCore, QtGui and QtDeclarative. The optional <link_type> argument
-#         can be specified as either LINK_PUBLIC or LINK_PRIVATE to specify the
-#         same argument to the target_link_libraries call.
-#
-#
-# IMPORTED Targets
-# ^^^^^^^^^^^^^^^^
-#
-# A particular Qt library may be used by using the corresponding
-# :prop_tgt:`IMPORTED` target with the :command:`target_link_libraries`
-# command:
-#
-# .. code-block:: cmake
-#
-#   target_link_libraries(myexe Qt4::QtGui Qt4::QtXml)
-#
-# Using a target in this way causes :cmake(1)` to use the appropriate include
-# directories and compile definitions for the target when compiling ``myexe``.
-#
-# Targets are aware of their dependencies, so for example it is not necessary
-# to list ``Qt4::QtCore`` if another Qt library is listed, and it is not
-# necessary to list ``Qt4::QtGui`` if ``Qt4::QtDeclarative`` is listed.
-# Targets may be tested for existence in the usual way with the
-# :command:`if(TARGET)` command.
-#
-# The Qt toolkit may contain both debug and release libraries.
-# :manual:`cmake(1)` will choose the appropriate version based on the build
-# configuration.
-#
-# ``Qt4::QtCore``
-#  The QtCore target
-# ``Qt4::QtGui``
-#  The QtGui target
-# ``Qt4::Qt3Support``
-#  The Qt3Support target
-# ``Qt4::QtAssistant``
-#  The QtAssistant target
-# ``Qt4::QtAssistantClient``
-#  The QtAssistantClient target
-# ``Qt4::QAxContainer``
-#  The QAxContainer target (Windows only)
-# ``Qt4::QAxServer``
-#  The QAxServer target (Windows only)
-# ``Qt4::QtDBus``
-#  The QtDBus target
-# ``Qt4::QtDeclarative``
-#  The QtDeclarative target
-# ``Qt4::QtDesigner``
-#  The QtDesigner target
-# ``Qt4::QtDesignerComponents``
-#  The QtDesignerComponents target
-# ``Qt4::QtHelp``
-#  The QtHelp target
-# ``Qt4::QtMotif``
-#  The QtMotif target
-# ``Qt4::QtMultimedia``
-#  The QtMultimedia target
-# ``Qt4::QtNetwork``
-#  The QtNetwork target
-# ``Qt4::QtNsPLugin``
-#  The QtNsPLugin target
-# ``Qt4::QtOpenGL``
-#  The QtOpenGL target
-# ``Qt4::QtScript``
-#  The QtScript target
-# ``Qt4::QtScriptTools``
-#  The QtScriptTools target
-# ``Qt4::QtSql``
-#  The QtSql target
-# ``Qt4::QtSvg``
-#  The QtSvg target
-# ``Qt4::QtTest``
-#  The QtTest target
-# ``Qt4::QtUiTools``
-#  The QtUiTools target
-# ``Qt4::QtWebKit``
-#  The QtWebKit target
-# ``Qt4::QtXml``
-#  The QtXml target
-# ``Qt4::QtXmlPatterns``
-#  The QtXmlPatterns target
-# ``Qt4::phonon``
-#  The phonon target
-#
-# Result Variables
-# ^^^^^^^^^^^^^^^^
-#
-#   Below is a detailed list of variables that FindQt4.cmake sets.
-#
-# ``Qt4_FOUND``
-#  If false, don't try to use Qt 4.
-# ``QT_FOUND``
-#  If false, don't try to use Qt. This variable is for compatibility only.
-# ``QT4_FOUND``
-#  If false, don't try to use Qt 4. This variable is for compatibility only.
-# ``QT_VERSION_MAJOR``
-#  The major version of Qt found.
-# ``QT_VERSION_MINOR``
-#  The minor version of Qt found.
-# ``QT_VERSION_PATCH``
-#  The patch version of Qt found.
+#[=======================================================================[.rst:
+FindQt4
+-------
+
+Finding and Using Qt4
+^^^^^^^^^^^^^^^^^^^^^
+
+This module can be used to find Qt4.  The most important issue is that
+the Qt4 qmake is available via the system path.  This qmake is then
+used to detect basically everything else.  This module defines a
+number of :prop_tgt:`IMPORTED` targets, macros and variables.
+
+Typical usage could be something like:
+
+.. code-block:: cmake
+
+   set(CMAKE_AUTOMOC ON)
+   set(CMAKE_INCLUDE_CURRENT_DIR ON)
+   find_package(Qt4 4.4.3 REQUIRED QtGui QtXml)
+   add_executable(myexe main.cpp)
+   target_link_libraries(myexe Qt4::QtGui Qt4::QtXml)
+
+.. note::
+
+ When using :prop_tgt:`IMPORTED` targets, the qtmain.lib static library is
+ automatically linked on Windows for :prop_tgt:`WIN32 <WIN32_EXECUTABLE>`
+ executables. To disable that globally, set the
+ ``QT4_NO_LINK_QTMAIN`` variable before finding Qt4. To disable that
+ for a particular executable, set the ``QT4_NO_LINK_QTMAIN`` target
+ property to ``TRUE`` on the executable.
+
+Qt Build Tools
+^^^^^^^^^^^^^^
+
+Qt relies on some bundled tools for code generation, such as ``moc`` for
+meta-object code generation,``uic`` for widget layout and population,
+and ``rcc`` for virtual filesystem content generation.  These tools may be
+automatically invoked by :manual:`cmake(1)` if the appropriate conditions
+are met.  See :manual:`cmake-qt(7)` for more.
+
+Qt Macros
+^^^^^^^^^
+
+In some cases it can be necessary or useful to invoke the Qt build tools in a
+more-manual way. Several macros are available to add targets for such uses.
+
+::
+
+  macro QT4_WRAP_CPP(outfiles inputfile ... [TARGET tgt] OPTIONS ...)
+        create moc code from a list of files containing Qt class with
+        the Q_OBJECT declaration.  Per-directory preprocessor definitions
+        are also added.  If the <tgt> is specified, the
+        INTERFACE_INCLUDE_DIRECTORIES and INTERFACE_COMPILE_DEFINITIONS from
+        the <tgt> are passed to moc.  Options may be given to moc, such as
+        those found when executing "moc -help".
+
+
+::
+
+  macro QT4_WRAP_UI(outfiles inputfile ... OPTIONS ...)
+        create code from a list of Qt designer ui files.
+        Options may be given to uic, such as those found
+        when executing "uic -help"
+
+
+::
+
+  macro QT4_ADD_RESOURCES(outfiles inputfile ... OPTIONS ...)
+        create code from a list of Qt resource files.
+        Options may be given to rcc, such as those found
+        when executing "rcc -help"
+
+
+::
+
+  macro QT4_GENERATE_MOC(inputfile outputfile [TARGET tgt])
+        creates a rule to run moc on infile and create outfile.
+        Use this if for some reason QT4_WRAP_CPP() isn't appropriate, e.g.
+        because you need a custom filename for the moc file or something
+        similar.  If the <tgt> is specified, the
+        INTERFACE_INCLUDE_DIRECTORIES and INTERFACE_COMPILE_DEFINITIONS from
+        the <tgt> are passed to moc.
+
+
+::
+
+  macro QT4_ADD_DBUS_INTERFACE(outfiles interface basename)
+        Create the interface header and implementation files with the
+        given basename from the given interface xml file and add it to
+        the list of sources.
+
+        You can pass additional parameters to the qdbusxml2cpp call by setting
+        properties on the input file:
+
+        INCLUDE the given file will be included in the generate interface header
+
+        CLASSNAME the generated class is named accordingly
+
+        NO_NAMESPACE the generated class is not wrapped in a namespace
+
+
+::
+
+  macro QT4_ADD_DBUS_INTERFACES(outfiles inputfile ... )
+        Create the interface header and implementation files
+        for all listed interface xml files.
+        The basename will be automatically determined from the name
+        of the xml file.
+
+        The source file properties described for
+        QT4_ADD_DBUS_INTERFACE also apply here.
+
+
+::
+
+  macro QT4_ADD_DBUS_ADAPTOR(outfiles xmlfile parentheader parentclassname
+                             [basename] [classname])
+        create a dbus adaptor (header and implementation file) from the xml file
+        describing the interface, and add it to the list of sources. The adaptor
+        forwards the calls to a parent class, defined in parentheader and named
+        parentclassname. The name of the generated files will be
+        <basename>adaptor.{cpp,h} where basename defaults to the basename of the
+        xml file.
+        If <classname> is provided, then it will be used as the classname of the
+        adaptor itself.
+
+
+::
+
+  macro QT4_GENERATE_DBUS_INTERFACE( header [interfacename] OPTIONS ...)
+        generate the xml interface file from the given header.
+        If the optional argument interfacename is omitted, the name of the
+        interface file is constructed from the basename of the header with
+        the suffix .xml appended.
+        Options may be given to qdbuscpp2xml, such as those found when
+        executing "qdbuscpp2xml --help"
+
+
+::
+
+  macro QT4_CREATE_TRANSLATION( qm_files directories ... sources ...
+                                ts_files ... OPTIONS ...)
+        out: qm_files
+        in:  directories sources ts_files
+        options: flags to pass to lupdate, such as -extensions to specify
+        extensions for a directory scan.
+        generates commands to create .ts (vie lupdate) and .qm
+        (via lrelease) - files from directories and/or sources. The ts files are
+        created and/or updated in the source tree (unless given with full paths).
+        The qm files are generated in the build tree.
+        Updating the translations can be done by adding the qm_files
+        to the source list of your library/executable, so they are
+        always updated, or by adding a custom target to control when
+        they get updated/generated.
+
+
+::
+
+  macro QT4_ADD_TRANSLATION( qm_files ts_files ... )
+        out: qm_files
+        in:  ts_files
+        generates commands to create .qm from .ts - files. The generated
+        filenames can be found in qm_files. The ts_files
+        must exist and are not updated in any way.
+
+
+::
+
+  macro QT4_AUTOMOC(sourcefile1 sourcefile2 ... [TARGET tgt])
+        The qt4_automoc macro is obsolete.  Use the CMAKE_AUTOMOC feature instead.
+        This macro is still experimental.
+        It can be used to have moc automatically handled.
+        So if you have the files foo.h and foo.cpp, and in foo.h a
+        a class uses the Q_OBJECT macro, moc has to run on it. If you don't
+        want to use QT4_WRAP_CPP() (which is reliable and mature), you can insert
+        #include "foo.moc"
+        in foo.cpp and then give foo.cpp as argument to QT4_AUTOMOC(). This will
+        scan all listed files at cmake-time for such included moc files and if it
+        finds them cause a rule to be generated to run moc at build time on the
+        accompanying header file foo.h.
+        If a source file has the SKIP_AUTOMOC property set it will be ignored by
+        this macro.
+        If the <tgt> is specified, the INTERFACE_INCLUDE_DIRECTORIES and
+        INTERFACE_COMPILE_DEFINITIONS from the <tgt> are passed to moc.
+
+
+::
+
+ function QT4_USE_MODULES( target [link_type] modules...)
+        This function is obsolete. Use target_link_libraries with IMPORTED targets
+        instead.
+        Make <target> use the <modules> from Qt. Using a Qt module means
+        to link to the library, add the relevant include directories for the
+        module, and add the relevant compiler defines for using the module.
+        Modules are roughly equivalent to components of Qt4, so usage would be
+        something like:
+         qt4_use_modules(myexe Core Gui Declarative)
+        to use QtCore, QtGui and QtDeclarative. The optional <link_type> argument
+        can be specified as either LINK_PUBLIC or LINK_PRIVATE to specify the
+        same argument to the target_link_libraries call.
+
+
+IMPORTED Targets
+^^^^^^^^^^^^^^^^
+
+A particular Qt library may be used by using the corresponding
+:prop_tgt:`IMPORTED` target with the :command:`target_link_libraries`
+command:
+
+.. code-block:: cmake
+
+  target_link_libraries(myexe Qt4::QtGui Qt4::QtXml)
+
+Using a target in this way causes :cmake(1)` to use the appropriate include
+directories and compile definitions for the target when compiling ``myexe``.
+
+Targets are aware of their dependencies, so for example it is not necessary
+to list ``Qt4::QtCore`` if another Qt library is listed, and it is not
+necessary to list ``Qt4::QtGui`` if ``Qt4::QtDeclarative`` is listed.
+Targets may be tested for existence in the usual way with the
+:command:`if(TARGET)` command.
+
+The Qt toolkit may contain both debug and release libraries.
+:manual:`cmake(1)` will choose the appropriate version based on the build
+configuration.
+
+``Qt4::QtCore``
+ The QtCore target
+``Qt4::QtGui``
+ The QtGui target
+``Qt4::Qt3Support``
+ The Qt3Support target
+``Qt4::QtAssistant``
+ The QtAssistant target
+``Qt4::QtAssistantClient``
+ The QtAssistantClient target
+``Qt4::QAxContainer``
+ The QAxContainer target (Windows only)
+``Qt4::QAxServer``
+ The QAxServer target (Windows only)
+``Qt4::QtDBus``
+ The QtDBus target
+``Qt4::QtDeclarative``
+ The QtDeclarative target
+``Qt4::QtDesigner``
+ The QtDesigner target
+``Qt4::QtDesignerComponents``
+ The QtDesignerComponents target
+``Qt4::QtHelp``
+ The QtHelp target
+``Qt4::QtMotif``
+ The QtMotif target
+``Qt4::QtMultimedia``
+ The QtMultimedia target
+``Qt4::QtNetwork``
+ The QtNetwork target
+``Qt4::QtNsPLugin``
+ The QtNsPLugin target
+``Qt4::QtOpenGL``
+ The QtOpenGL target
+``Qt4::QtScript``
+ The QtScript target
+``Qt4::QtScriptTools``
+ The QtScriptTools target
+``Qt4::QtSql``
+ The QtSql target
+``Qt4::QtSvg``
+ The QtSvg target
+``Qt4::QtTest``
+ The QtTest target
+``Qt4::QtUiTools``
+ The QtUiTools target
+``Qt4::QtWebKit``
+ The QtWebKit target
+``Qt4::QtXml``
+ The QtXml target
+``Qt4::QtXmlPatterns``
+ The QtXmlPatterns target
+``Qt4::phonon``
+ The phonon target
+
+Result Variables
+^^^^^^^^^^^^^^^^
+
+  Below is a detailed list of variables that FindQt4.cmake sets.
+
+``Qt4_FOUND``
+ If false, don't try to use Qt 4.
+``QT_FOUND``
+ If false, don't try to use Qt. This variable is for compatibility only.
+``QT4_FOUND``
+ If false, don't try to use Qt 4. This variable is for compatibility only.
+``QT_VERSION_MAJOR``
+ The major version of Qt found.
+``QT_VERSION_MINOR``
+ The minor version of Qt found.
+``QT_VERSION_PATCH``
+ The patch version of Qt found.
+#]=======================================================================]
 
 # Use find_package( Qt4 COMPONENTS ... ) to enable modules
 if( Qt4_FIND_COMPONENTS )
diff --git a/Modules/FindQuickTime.cmake b/Modules/FindQuickTime.cmake
index 995d882..107486d 100644
--- a/Modules/FindQuickTime.cmake
+++ b/Modules/FindQuickTime.cmake
@@ -1,20 +1,21 @@
 # Distributed under the OSI-approved BSD 3-Clause License.  See accompanying
 # file Copyright.txt or https://cmake.org/licensing for details.
 
-#.rst:
-# FindQuickTime
-# -------------
-#
-#
-#
-# Locate QuickTime This module defines QUICKTIME_LIBRARY
-# QUICKTIME_FOUND, if false, do not try to link to gdal
-# QUICKTIME_INCLUDE_DIR, where to find the headers
-#
-# $QUICKTIME_DIR is an environment variable that would correspond to the
-# ./configure --prefix=$QUICKTIME_DIR
-#
-# Created by Eric Wing.
+#[=======================================================================[.rst:
+FindQuickTime
+-------------
+
+
+
+Locate QuickTime This module defines QUICKTIME_LIBRARY
+QUICKTIME_FOUND, if false, do not try to link to gdal
+QUICKTIME_INCLUDE_DIR, where to find the headers
+
+$QUICKTIME_DIR is an environment variable that would correspond to the
+./configure --prefix=$QUICKTIME_DIR
+
+Created by Eric Wing.
+#]=======================================================================]
 
 find_path(QUICKTIME_INCLUDE_DIR QuickTime/QuickTime.h QuickTime.h
   HINTS
diff --git a/Modules/FindRTI.cmake b/Modules/FindRTI.cmake
index b2ef076..54d2bec 100644
--- a/Modules/FindRTI.cmake
+++ b/Modules/FindRTI.cmake
@@ -1,37 +1,38 @@
 # Distributed under the OSI-approved BSD 3-Clause License.  See accompanying
 # file Copyright.txt or https://cmake.org/licensing for details.
 
-#.rst:
-# FindRTI
-# -------
-#
-# Try to find M&S HLA RTI libraries
-#
-# This module finds if any HLA RTI is installed and locates the standard
-# RTI include files and libraries.
-#
-# RTI is a simulation infrastructure standardized by IEEE and SISO.  It
-# has a well defined C++ API that assures that simulation applications
-# are independent on a particular RTI implementation.
-#
-# ::
-#
-#   http://en.wikipedia.org/wiki/Run-Time_Infrastructure_(simulation)
-#
-#
-#
-# This code sets the following variables:
-#
-# ::
-#
-#   RTI_INCLUDE_DIR = the directory where RTI includes file are found
-#   RTI_LIBRARIES = The libraries to link against to use RTI
-#   RTI_DEFINITIONS = -DRTI_USES_STD_FSTREAM
-#   RTI_FOUND = Set to FALSE if any HLA RTI was not found
-#
-#
-#
-# Report problems to <certi-devel@nongnu.org>
+#[=======================================================================[.rst:
+FindRTI
+-------
+
+Try to find M&S HLA RTI libraries
+
+This module finds if any HLA RTI is installed and locates the standard
+RTI include files and libraries.
+
+RTI is a simulation infrastructure standardized by IEEE and SISO.  It
+has a well defined C++ API that assures that simulation applications
+are independent on a particular RTI implementation.
+
+::
+
+  http://en.wikipedia.org/wiki/Run-Time_Infrastructure_(simulation)
+
+
+
+This code sets the following variables:
+
+::
+
+  RTI_INCLUDE_DIR = the directory where RTI includes file are found
+  RTI_LIBRARIES = The libraries to link against to use RTI
+  RTI_DEFINITIONS = -DRTI_USES_STD_FSTREAM
+  RTI_FOUND = Set to FALSE if any HLA RTI was not found
+
+
+
+Report problems to <certi-devel@nongnu.org>
+#]=======================================================================]
 
 macro(RTI_MESSAGE_QUIETLY QUIET TYPE MSG)
   if(NOT ${QUIET})
diff --git a/Modules/FindRuby.cmake b/Modules/FindRuby.cmake
index bd9f835..58debdd 100644
--- a/Modules/FindRuby.cmake
+++ b/Modules/FindRuby.cmake
@@ -1,37 +1,38 @@
 # Distributed under the OSI-approved BSD 3-Clause License.  See accompanying
 # file Copyright.txt or https://cmake.org/licensing for details.
 
-#.rst:
-# FindRuby
-# --------
-#
-# Find Ruby
-#
-# This module finds if Ruby is installed and determines where the
-# include files and libraries are.  Ruby 1.8, 1.9, 2.0 and 2.1 are
-# supported.
-#
-# The minimum required version of Ruby can be specified using the
-# standard syntax, e.g.  find_package(Ruby 1.8)
-#
-# It also determines what the name of the library is.  This code sets
-# the following variables:
-#
-# ``RUBY_EXECUTABLE``
-#   full path to the ruby binary
-# ``RUBY_INCLUDE_DIRS``
-#   include dirs to be used when using the ruby library
-# ``RUBY_LIBRARY``
-#   full path to the ruby library
-# ``RUBY_VERSION``
-#   the version of ruby which was found, e.g. "1.8.7"
-# ``RUBY_FOUND``
-#   set to true if ruby ws found successfully
-#
-# Also:
-#
-# ``RUBY_INCLUDE_PATH``
-#   same as RUBY_INCLUDE_DIRS, only provided for compatibility reasons, don't use it
+#[=======================================================================[.rst:
+FindRuby
+--------
+
+Find Ruby
+
+This module finds if Ruby is installed and determines where the
+include files and libraries are.  Ruby 1.8, 1.9, 2.0 and 2.1 are
+supported.
+
+The minimum required version of Ruby can be specified using the
+standard syntax, e.g.  find_package(Ruby 1.8)
+
+It also determines what the name of the library is.  This code sets
+the following variables:
+
+``RUBY_EXECUTABLE``
+  full path to the ruby binary
+``RUBY_INCLUDE_DIRS``
+  include dirs to be used when using the ruby library
+``RUBY_LIBRARY``
+  full path to the ruby library
+``RUBY_VERSION``
+  the version of ruby which was found, e.g. "1.8.7"
+``RUBY_FOUND``
+  set to true if ruby ws found successfully
+
+Also:
+
+``RUBY_INCLUDE_PATH``
+  same as RUBY_INCLUDE_DIRS, only provided for compatibility reasons, don't use it
+#]=======================================================================]
 
 #   RUBY_ARCHDIR=`$RUBY -r rbconfig -e 'printf("%s",Config::CONFIG@<:@"archdir"@:>@)'`
 #   RUBY_SITEARCHDIR=`$RUBY -r rbconfig -e 'printf("%s",Config::CONFIG@<:@"sitearchdir"@:>@)'`
diff --git a/Modules/FindSDL.cmake b/Modules/FindSDL.cmake
index 3410018..2813831 100644
--- a/Modules/FindSDL.cmake
+++ b/Modules/FindSDL.cmake
@@ -1,75 +1,76 @@
 # Distributed under the OSI-approved BSD 3-Clause License.  See accompanying
 # file Copyright.txt or https://cmake.org/licensing for details.
 
-#.rst:
-# FindSDL
-# -------
-#
-# Locate SDL library
-#
-# This module defines
-#
-# ::
-#
-#   SDL_LIBRARY, the name of the library to link against
-#   SDL_FOUND, if false, do not try to link to SDL
-#   SDL_INCLUDE_DIR, where to find SDL.h
-#   SDL_VERSION_STRING, human-readable string containing the version of SDL
-#
-#
-#
-# This module responds to the flag:
-#
-# ::
-#
-#   SDL_BUILDING_LIBRARY
-#     If this is defined, then no SDL_main will be linked in because
-#     only applications need main().
-#     Otherwise, it is assumed you are building an application and this
-#     module will attempt to locate and set the proper link flags
-#     as part of the returned SDL_LIBRARY variable.
-#
-#
-#
-# Don't forget to include SDLmain.h and SDLmain.m your project for the
-# OS X framework based version.  (Other versions link to -lSDLmain which
-# this module will try to find on your behalf.) Also for OS X, this
-# module will automatically add the -framework Cocoa on your behalf.
-#
-#
-#
-# Additional Note: If you see an empty SDL_LIBRARY_TEMP in your
-# configuration and no SDL_LIBRARY, it means CMake did not find your SDL
-# library (SDL.dll, libsdl.so, SDL.framework, etc).  Set
-# SDL_LIBRARY_TEMP to point to your SDL library, and configure again.
-# Similarly, if you see an empty SDLMAIN_LIBRARY, you should set this
-# value as appropriate.  These values are used to generate the final
-# SDL_LIBRARY variable, but when these values are unset, SDL_LIBRARY
-# does not get created.
-#
-#
-#
-# $SDLDIR is an environment variable that would correspond to the
-# ./configure --prefix=$SDLDIR used in building SDL.  l.e.galup 9-20-02
-#
-# Modified by Eric Wing.  Added code to assist with automated building
-# by using environmental variables and providing a more
-# controlled/consistent search behavior.  Added new modifications to
-# recognize OS X frameworks and additional Unix paths (FreeBSD, etc).
-# Also corrected the header search path to follow "proper" SDL
-# guidelines.  Added a search for SDLmain which is needed by some
-# platforms.  Added a search for threads which is needed by some
-# platforms.  Added needed compile switches for MinGW.
-#
-# On OSX, this will prefer the Framework version (if found) over others.
-# People will have to manually change the cache values of SDL_LIBRARY to
-# override this selection or set the CMake environment
-# CMAKE_INCLUDE_PATH to modify the search paths.
-#
-# Note that the header path has changed from SDL/SDL.h to just SDL.h
-# This needed to change because "proper" SDL convention is #include
-# "SDL.h", not <SDL/SDL.h>.  This is done for portability reasons
-# because not all systems place things in SDL/ (see FreeBSD).
+#[=======================================================================[.rst:
+FindSDL
+-------
+
+Locate SDL library
+
+This module defines
+
+::
+
+  SDL_LIBRARY, the name of the library to link against
+  SDL_FOUND, if false, do not try to link to SDL
+  SDL_INCLUDE_DIR, where to find SDL.h
+  SDL_VERSION_STRING, human-readable string containing the version of SDL
+
+
+
+This module responds to the flag:
+
+::
+
+  SDL_BUILDING_LIBRARY
+    If this is defined, then no SDL_main will be linked in because
+    only applications need main().
+    Otherwise, it is assumed you are building an application and this
+    module will attempt to locate and set the proper link flags
+    as part of the returned SDL_LIBRARY variable.
+
+
+
+Don't forget to include SDLmain.h and SDLmain.m your project for the
+OS X framework based version.  (Other versions link to -lSDLmain which
+this module will try to find on your behalf.) Also for OS X, this
+module will automatically add the -framework Cocoa on your behalf.
+
+
+
+Additional Note: If you see an empty SDL_LIBRARY_TEMP in your
+configuration and no SDL_LIBRARY, it means CMake did not find your SDL
+library (SDL.dll, libsdl.so, SDL.framework, etc).  Set
+SDL_LIBRARY_TEMP to point to your SDL library, and configure again.
+Similarly, if you see an empty SDLMAIN_LIBRARY, you should set this
+value as appropriate.  These values are used to generate the final
+SDL_LIBRARY variable, but when these values are unset, SDL_LIBRARY
+does not get created.
+
+
+
+$SDLDIR is an environment variable that would correspond to the
+./configure --prefix=$SDLDIR used in building SDL.  l.e.galup 9-20-02
+
+Modified by Eric Wing.  Added code to assist with automated building
+by using environmental variables and providing a more
+controlled/consistent search behavior.  Added new modifications to
+recognize OS X frameworks and additional Unix paths (FreeBSD, etc).
+Also corrected the header search path to follow "proper" SDL
+guidelines.  Added a search for SDLmain which is needed by some
+platforms.  Added a search for threads which is needed by some
+platforms.  Added needed compile switches for MinGW.
+
+On OSX, this will prefer the Framework version (if found) over others.
+People will have to manually change the cache values of SDL_LIBRARY to
+override this selection or set the CMake environment
+CMAKE_INCLUDE_PATH to modify the search paths.
+
+Note that the header path has changed from SDL/SDL.h to just SDL.h
+This needed to change because "proper" SDL convention is #include
+"SDL.h", not <SDL/SDL.h>.  This is done for portability reasons
+because not all systems place things in SDL/ (see FreeBSD).
+#]=======================================================================]
 
 find_path(SDL_INCLUDE_DIR SDL.h
   HINTS
diff --git a/Modules/FindSDL_image.cmake b/Modules/FindSDL_image.cmake
index 8cdaa7a..e687b49 100644
--- a/Modules/FindSDL_image.cmake
+++ b/Modules/FindSDL_image.cmake
@@ -1,40 +1,41 @@
 # Distributed under the OSI-approved BSD 3-Clause License.  See accompanying
 # file Copyright.txt or https://cmake.org/licensing for details.
 
-#.rst:
-# FindSDL_image
-# -------------
-#
-# Locate SDL_image library
-#
-# This module defines:
-#
-# ::
-#
-#   SDL_IMAGE_LIBRARIES, the name of the library to link against
-#   SDL_IMAGE_INCLUDE_DIRS, where to find the headers
-#   SDL_IMAGE_FOUND, if false, do not try to link against
-#   SDL_IMAGE_VERSION_STRING - human-readable string containing the
-#                              version of SDL_image
-#
-#
-#
-# For backward compatibility the following variables are also set:
-#
-# ::
-#
-#   SDLIMAGE_LIBRARY (same value as SDL_IMAGE_LIBRARIES)
-#   SDLIMAGE_INCLUDE_DIR (same value as SDL_IMAGE_INCLUDE_DIRS)
-#   SDLIMAGE_FOUND (same value as SDL_IMAGE_FOUND)
-#
-#
-#
-# $SDLDIR is an environment variable that would correspond to the
-# ./configure --prefix=$SDLDIR used in building SDL.
-#
-# Created by Eric Wing.  This was influenced by the FindSDL.cmake
-# module, but with modifications to recognize OS X frameworks and
-# additional Unix paths (FreeBSD, etc).
+#[=======================================================================[.rst:
+FindSDL_image
+-------------
+
+Locate SDL_image library
+
+This module defines:
+
+::
+
+  SDL_IMAGE_LIBRARIES, the name of the library to link against
+  SDL_IMAGE_INCLUDE_DIRS, where to find the headers
+  SDL_IMAGE_FOUND, if false, do not try to link against
+  SDL_IMAGE_VERSION_STRING - human-readable string containing the
+                             version of SDL_image
+
+
+
+For backward compatibility the following variables are also set:
+
+::
+
+  SDLIMAGE_LIBRARY (same value as SDL_IMAGE_LIBRARIES)
+  SDLIMAGE_INCLUDE_DIR (same value as SDL_IMAGE_INCLUDE_DIRS)
+  SDLIMAGE_FOUND (same value as SDL_IMAGE_FOUND)
+
+
+
+$SDLDIR is an environment variable that would correspond to the
+./configure --prefix=$SDLDIR used in building SDL.
+
+Created by Eric Wing.  This was influenced by the FindSDL.cmake
+module, but with modifications to recognize OS X frameworks and
+additional Unix paths (FreeBSD, etc).
+#]=======================================================================]
 
 if(NOT SDL_IMAGE_INCLUDE_DIR AND SDLIMAGE_INCLUDE_DIR)
   set(SDL_IMAGE_INCLUDE_DIR ${SDLIMAGE_INCLUDE_DIR} CACHE PATH "directory cache
diff --git a/Modules/FindSDL_mixer.cmake b/Modules/FindSDL_mixer.cmake
index 35233d1..315400a 100644
--- a/Modules/FindSDL_mixer.cmake
+++ b/Modules/FindSDL_mixer.cmake
@@ -1,40 +1,41 @@
 # Distributed under the OSI-approved BSD 3-Clause License.  See accompanying
 # file Copyright.txt or https://cmake.org/licensing for details.
 
-#.rst:
-# FindSDL_mixer
-# -------------
-#
-# Locate SDL_mixer library
-#
-# This module defines:
-#
-# ::
-#
-#   SDL_MIXER_LIBRARIES, the name of the library to link against
-#   SDL_MIXER_INCLUDE_DIRS, where to find the headers
-#   SDL_MIXER_FOUND, if false, do not try to link against
-#   SDL_MIXER_VERSION_STRING - human-readable string containing the
-#                              version of SDL_mixer
-#
-#
-#
-# For backward compatibility the following variables are also set:
-#
-# ::
-#
-#   SDLMIXER_LIBRARY (same value as SDL_MIXER_LIBRARIES)
-#   SDLMIXER_INCLUDE_DIR (same value as SDL_MIXER_INCLUDE_DIRS)
-#   SDLMIXER_FOUND (same value as SDL_MIXER_FOUND)
-#
-#
-#
-# $SDLDIR is an environment variable that would correspond to the
-# ./configure --prefix=$SDLDIR used in building SDL.
-#
-# Created by Eric Wing.  This was influenced by the FindSDL.cmake
-# module, but with modifications to recognize OS X frameworks and
-# additional Unix paths (FreeBSD, etc).
+#[=======================================================================[.rst:
+FindSDL_mixer
+-------------
+
+Locate SDL_mixer library
+
+This module defines:
+
+::
+
+  SDL_MIXER_LIBRARIES, the name of the library to link against
+  SDL_MIXER_INCLUDE_DIRS, where to find the headers
+  SDL_MIXER_FOUND, if false, do not try to link against
+  SDL_MIXER_VERSION_STRING - human-readable string containing the
+                             version of SDL_mixer
+
+
+
+For backward compatibility the following variables are also set:
+
+::
+
+  SDLMIXER_LIBRARY (same value as SDL_MIXER_LIBRARIES)
+  SDLMIXER_INCLUDE_DIR (same value as SDL_MIXER_INCLUDE_DIRS)
+  SDLMIXER_FOUND (same value as SDL_MIXER_FOUND)
+
+
+
+$SDLDIR is an environment variable that would correspond to the
+./configure --prefix=$SDLDIR used in building SDL.
+
+Created by Eric Wing.  This was influenced by the FindSDL.cmake
+module, but with modifications to recognize OS X frameworks and
+additional Unix paths (FreeBSD, etc).
+#]=======================================================================]
 
 if(NOT SDL_MIXER_INCLUDE_DIR AND SDLMIXER_INCLUDE_DIR)
   set(SDL_MIXER_INCLUDE_DIR ${SDLMIXER_INCLUDE_DIR} CACHE PATH "directory cache
diff --git a/Modules/FindSDL_net.cmake b/Modules/FindSDL_net.cmake
index b406946..28cb4d6 100644
--- a/Modules/FindSDL_net.cmake
+++ b/Modules/FindSDL_net.cmake
@@ -1,39 +1,40 @@
 # Distributed under the OSI-approved BSD 3-Clause License.  See accompanying
 # file Copyright.txt or https://cmake.org/licensing for details.
 
-#.rst:
-# FindSDL_net
-# -----------
-#
-# Locate SDL_net library
-#
-# This module defines:
-#
-# ::
-#
-#   SDL_NET_LIBRARIES, the name of the library to link against
-#   SDL_NET_INCLUDE_DIRS, where to find the headers
-#   SDL_NET_FOUND, if false, do not try to link against
-#   SDL_NET_VERSION_STRING - human-readable string containing the version of SDL_net
-#
-#
-#
-# For backward compatibility the following variables are also set:
-#
-# ::
-#
-#   SDLNET_LIBRARY (same value as SDL_NET_LIBRARIES)
-#   SDLNET_INCLUDE_DIR (same value as SDL_NET_INCLUDE_DIRS)
-#   SDLNET_FOUND (same value as SDL_NET_FOUND)
-#
-#
-#
-# $SDLDIR is an environment variable that would correspond to the
-# ./configure --prefix=$SDLDIR used in building SDL.
-#
-# Created by Eric Wing.  This was influenced by the FindSDL.cmake
-# module, but with modifications to recognize OS X frameworks and
-# additional Unix paths (FreeBSD, etc).
+#[=======================================================================[.rst:
+FindSDL_net
+-----------
+
+Locate SDL_net library
+
+This module defines:
+
+::
+
+  SDL_NET_LIBRARIES, the name of the library to link against
+  SDL_NET_INCLUDE_DIRS, where to find the headers
+  SDL_NET_FOUND, if false, do not try to link against
+  SDL_NET_VERSION_STRING - human-readable string containing the version of SDL_net
+
+
+
+For backward compatibility the following variables are also set:
+
+::
+
+  SDLNET_LIBRARY (same value as SDL_NET_LIBRARIES)
+  SDLNET_INCLUDE_DIR (same value as SDL_NET_INCLUDE_DIRS)
+  SDLNET_FOUND (same value as SDL_NET_FOUND)
+
+
+
+$SDLDIR is an environment variable that would correspond to the
+./configure --prefix=$SDLDIR used in building SDL.
+
+Created by Eric Wing.  This was influenced by the FindSDL.cmake
+module, but with modifications to recognize OS X frameworks and
+additional Unix paths (FreeBSD, etc).
+#]=======================================================================]
 
 if(NOT SDL_NET_INCLUDE_DIR AND SDLNET_INCLUDE_DIR)
   set(SDL_NET_INCLUDE_DIR ${SDLNET_INCLUDE_DIR} CACHE PATH "directory cache
diff --git a/Modules/FindSDL_sound.cmake b/Modules/FindSDL_sound.cmake
index cf33a4c..e217981 100644
--- a/Modules/FindSDL_sound.cmake
+++ b/Modules/FindSDL_sound.cmake
@@ -1,84 +1,85 @@
 # Distributed under the OSI-approved BSD 3-Clause License.  See accompanying
 # file Copyright.txt or https://cmake.org/licensing for details.
 
-#.rst:
-# FindSDL_sound
-# -------------
-#
-# Locates the SDL_sound library
-#
-#
-#
-# This module depends on SDL being found and must be called AFTER
-# FindSDL.cmake is called.
-#
-# This module defines
-#
-# ::
-#
-#   SDL_SOUND_INCLUDE_DIR, where to find SDL_sound.h
-#   SDL_SOUND_FOUND, if false, do not try to link to SDL_sound
-#   SDL_SOUND_LIBRARIES, this contains the list of libraries that you need
-#     to link against.
-#   SDL_SOUND_EXTRAS, this is an optional variable for you to add your own
-#     flags to SDL_SOUND_LIBRARIES. This is prepended to SDL_SOUND_LIBRARIES.
-#     This is available mostly for cases this module failed to anticipate for
-#     and you must add additional flags. This is marked as ADVANCED.
-#   SDL_SOUND_VERSION_STRING, human-readable string containing the
-#     version of SDL_sound
-#
-#
-#
-# This module also defines (but you shouldn't need to use directly)
-#
-# ::
-#
-#    SDL_SOUND_LIBRARY, the name of just the SDL_sound library you would link
-#    against. Use SDL_SOUND_LIBRARIES for you link instructions and not this one.
-#
-# And might define the following as needed
-#
-# ::
-#
-#    MIKMOD_LIBRARY
-#    MODPLUG_LIBRARY
-#    OGG_LIBRARY
-#    VORBIS_LIBRARY
-#    SMPEG_LIBRARY
-#    FLAC_LIBRARY
-#    SPEEX_LIBRARY
-#
-#
-#
-# Typically, you should not use these variables directly, and you should
-# use SDL_SOUND_LIBRARIES which contains SDL_SOUND_LIBRARY and the other
-# audio libraries (if needed) to successfully compile on your system.
-#
-# Created by Eric Wing.  This module is a bit more complicated than the
-# other FindSDL* family modules.  The reason is that SDL_sound can be
-# compiled in a large variety of different ways which are independent of
-# platform.  SDL_sound may dynamically link against other 3rd party
-# libraries to get additional codec support, such as Ogg Vorbis, SMPEG,
-# ModPlug, MikMod, FLAC, Speex, and potentially others.  Under some
-# circumstances which I don't fully understand, there seems to be a
-# requirement that dependent libraries of libraries you use must also be
-# explicitly linked against in order to successfully compile.  SDL_sound
-# does not currently have any system in place to know how it was
-# compiled.  So this CMake module does the hard work in trying to
-# discover which 3rd party libraries are required for building (if any).
-# This module uses a brute force approach to create a test program that
-# uses SDL_sound, and then tries to build it.  If the build fails, it
-# parses the error output for known symbol names to figure out which
-# libraries are needed.
-#
-# Responds to the $SDLDIR and $SDLSOUNDDIR environmental variable that
-# would correspond to the ./configure --prefix=$SDLDIR used in building
-# SDL.
-#
-# On OSX, this will prefer the Framework version (if found) over others.
-# People will have to manually change the cache values of SDL_LIBRARY to
-# override this selectionor set the CMake environment CMAKE_INCLUDE_PATH
-# to modify the search paths.
+#[=======================================================================[.rst:
+FindSDL_sound
+-------------
+
+Locates the SDL_sound library
+
+
+
+This module depends on SDL being found and must be called AFTER
+FindSDL.cmake is called.
+
+This module defines
+
+::
+
+  SDL_SOUND_INCLUDE_DIR, where to find SDL_sound.h
+  SDL_SOUND_FOUND, if false, do not try to link to SDL_sound
+  SDL_SOUND_LIBRARIES, this contains the list of libraries that you need
+    to link against.
+  SDL_SOUND_EXTRAS, this is an optional variable for you to add your own
+    flags to SDL_SOUND_LIBRARIES. This is prepended to SDL_SOUND_LIBRARIES.
+    This is available mostly for cases this module failed to anticipate for
+    and you must add additional flags. This is marked as ADVANCED.
+  SDL_SOUND_VERSION_STRING, human-readable string containing the
+    version of SDL_sound
+
+
+
+This module also defines (but you shouldn't need to use directly)
+
+::
+
+   SDL_SOUND_LIBRARY, the name of just the SDL_sound library you would link
+   against. Use SDL_SOUND_LIBRARIES for you link instructions and not this one.
+
+And might define the following as needed
+
+::
+
+   MIKMOD_LIBRARY
+   MODPLUG_LIBRARY
+   OGG_LIBRARY
+   VORBIS_LIBRARY
+   SMPEG_LIBRARY
+   FLAC_LIBRARY
+   SPEEX_LIBRARY
+
+
+
+Typically, you should not use these variables directly, and you should
+use SDL_SOUND_LIBRARIES which contains SDL_SOUND_LIBRARY and the other
+audio libraries (if needed) to successfully compile on your system.
+
+Created by Eric Wing.  This module is a bit more complicated than the
+other FindSDL* family modules.  The reason is that SDL_sound can be
+compiled in a large variety of different ways which are independent of
+platform.  SDL_sound may dynamically link against other 3rd party
+libraries to get additional codec support, such as Ogg Vorbis, SMPEG,
+ModPlug, MikMod, FLAC, Speex, and potentially others.  Under some
+circumstances which I don't fully understand, there seems to be a
+requirement that dependent libraries of libraries you use must also be
+explicitly linked against in order to successfully compile.  SDL_sound
+does not currently have any system in place to know how it was
+compiled.  So this CMake module does the hard work in trying to
+discover which 3rd party libraries are required for building (if any).
+This module uses a brute force approach to create a test program that
+uses SDL_sound, and then tries to build it.  If the build fails, it
+parses the error output for known symbol names to figure out which
+libraries are needed.
+
+Responds to the $SDLDIR and $SDLSOUNDDIR environmental variable that
+would correspond to the ./configure --prefix=$SDLDIR used in building
+SDL.
+
+On OSX, this will prefer the Framework version (if found) over others.
+People will have to manually change the cache values of SDL_LIBRARY to
+override this selectionor set the CMake environment CMAKE_INCLUDE_PATH
+to modify the search paths.
+#]=======================================================================]
 
 set(SDL_SOUND_EXTRAS "" CACHE STRING "SDL_sound extra flags")
 mark_as_advanced(SDL_SOUND_EXTRAS)
diff --git a/Modules/FindSDL_ttf.cmake b/Modules/FindSDL_ttf.cmake
index aa705f2..d5721da 100644
--- a/Modules/FindSDL_ttf.cmake
+++ b/Modules/FindSDL_ttf.cmake
@@ -1,39 +1,40 @@
 # Distributed under the OSI-approved BSD 3-Clause License.  See accompanying
 # file Copyright.txt or https://cmake.org/licensing for details.
 
-#.rst:
-# FindSDL_ttf
-# -----------
-#
-# Locate SDL_ttf library
-#
-# This module defines:
-#
-# ::
-#
-#   SDL_TTF_LIBRARIES, the name of the library to link against
-#   SDL_TTF_INCLUDE_DIRS, where to find the headers
-#   SDL_TTF_FOUND, if false, do not try to link against
-#   SDL_TTF_VERSION_STRING - human-readable string containing the version of SDL_ttf
-#
-#
-#
-# For backward compatibility the following variables are also set:
-#
-# ::
-#
-#   SDLTTF_LIBRARY (same value as SDL_TTF_LIBRARIES)
-#   SDLTTF_INCLUDE_DIR (same value as SDL_TTF_INCLUDE_DIRS)
-#   SDLTTF_FOUND (same value as SDL_TTF_FOUND)
-#
-#
-#
-# $SDLDIR is an environment variable that would correspond to the
-# ./configure --prefix=$SDLDIR used in building SDL.
-#
-# Created by Eric Wing.  This was influenced by the FindSDL.cmake
-# module, but with modifications to recognize OS X frameworks and
-# additional Unix paths (FreeBSD, etc).
+#[=======================================================================[.rst:
+FindSDL_ttf
+-----------
+
+Locate SDL_ttf library
+
+This module defines:
+
+::
+
+  SDL_TTF_LIBRARIES, the name of the library to link against
+  SDL_TTF_INCLUDE_DIRS, where to find the headers
+  SDL_TTF_FOUND, if false, do not try to link against
+  SDL_TTF_VERSION_STRING - human-readable string containing the version of SDL_ttf
+
+
+
+For backward compatibility the following variables are also set:
+
+::
+
+  SDLTTF_LIBRARY (same value as SDL_TTF_LIBRARIES)
+  SDLTTF_INCLUDE_DIR (same value as SDL_TTF_INCLUDE_DIRS)
+  SDLTTF_FOUND (same value as SDL_TTF_FOUND)
+
+
+
+$SDLDIR is an environment variable that would correspond to the
+./configure --prefix=$SDLDIR used in building SDL.
+
+Created by Eric Wing.  This was influenced by the FindSDL.cmake
+module, but with modifications to recognize OS X frameworks and
+additional Unix paths (FreeBSD, etc).
+#]=======================================================================]
 
 if(NOT SDL_TTF_INCLUDE_DIR AND SDLTTF_INCLUDE_DIR)
   set(SDL_TTF_INCLUDE_DIR ${SDLTTF_INCLUDE_DIR} CACHE PATH "directory cache
diff --git a/Modules/FindSWIG.cmake b/Modules/FindSWIG.cmake
index 92c032f..fc0ed00 100644
--- a/Modules/FindSWIG.cmake
+++ b/Modules/FindSWIG.cmake
@@ -1,29 +1,30 @@
 # Distributed under the OSI-approved BSD 3-Clause License.  See accompanying
 # file Copyright.txt or https://cmake.org/licensing for details.
 
-#.rst:
-# FindSWIG
-# --------
-#
-# Find SWIG
-#
-# This module finds an installed SWIG.  It sets the following variables:
-#
-# ::
-#
-#   SWIG_FOUND - set to true if SWIG is found
-#   SWIG_DIR - the directory where swig is installed
-#   SWIG_EXECUTABLE - the path to the swig executable
-#   SWIG_VERSION   - the version number of the swig executable
-#
-#
-#
-# The minimum required version of SWIG can be specified using the
-# standard syntax, e.g.  find_package(SWIG 1.1)
-#
-# All information is collected from the SWIG_EXECUTABLE so the version
-# to be found can be changed from the command line by means of setting
-# SWIG_EXECUTABLE
+#[=======================================================================[.rst:
+FindSWIG
+--------
+
+Find SWIG
+
+This module finds an installed SWIG.  It sets the following variables:
+
+::
+
+  SWIG_FOUND - set to true if SWIG is found
+  SWIG_DIR - the directory where swig is installed
+  SWIG_EXECUTABLE - the path to the swig executable
+  SWIG_VERSION   - the version number of the swig executable
+
+
+
+The minimum required version of SWIG can be specified using the
+standard syntax, e.g.  find_package(SWIG 1.1)
+
+All information is collected from the SWIG_EXECUTABLE so the version
+to be found can be changed from the command line by means of setting
+SWIG_EXECUTABLE
+#]=======================================================================]
 
 find_program(SWIG_EXECUTABLE NAMES swig3.0 swig2.0 swig)
 
diff --git a/Modules/FindSelfPackers.cmake b/Modules/FindSelfPackers.cmake
index ac2c7cf..1abbcbd 100644
--- a/Modules/FindSelfPackers.cmake
+++ b/Modules/FindSelfPackers.cmake
@@ -1,19 +1,20 @@
 # Distributed under the OSI-approved BSD 3-Clause License.  See accompanying
 # file Copyright.txt or https://cmake.org/licensing for details.
 
-#.rst:
-# FindSelfPackers
-# ---------------
-#
-# Find upx
-#
-# This module looks for some executable packers (i.e.  software that
-# compress executables or shared libs into on-the-fly self-extracting
-# executables or shared libs.  Examples:
-#
-# ::
-#
-#   UPX: http://wildsau.idv.uni-linz.ac.at/mfx/upx.html
+#[=======================================================================[.rst:
+FindSelfPackers
+---------------
+
+Find upx
+
+This module looks for some executable packers (i.e.  software that
+compress executables or shared libs into on-the-fly self-extracting
+executables or shared libs.  Examples:
+
+::
+
+  UPX: http://wildsau.idv.uni-linz.ac.at/mfx/upx.html
+#]=======================================================================]
 
 include(${CMAKE_CURRENT_LIST_DIR}/FindCygwin.cmake)
 
diff --git a/Modules/FindSquish.cmake b/Modules/FindSquish.cmake
index d1ce200..7d49505 100644
--- a/Modules/FindSquish.cmake
+++ b/Modules/FindSquish.cmake
@@ -1,123 +1,124 @@
 # Distributed under the OSI-approved BSD 3-Clause License.  See accompanying
 # file Copyright.txt or https://cmake.org/licensing for details.
 
-#.rst:
-# FindSquish
-# ----------
-#
-# -- Typical Use
-#
-#
-#
-# This module can be used to find Squish.  Currently Squish versions 3
-# and 4 are supported.
-#
-# ::
-#
-#   SQUISH_FOUND                    If false, don't try to use Squish
-#   SQUISH_VERSION                  The full version of Squish found
-#   SQUISH_VERSION_MAJOR            The major version of Squish found
-#   SQUISH_VERSION_MINOR            The minor version of Squish found
-#   SQUISH_VERSION_PATCH            The patch version of Squish found
-#
-#
-#
-# ::
-#
-#   SQUISH_INSTALL_DIR              The Squish installation directory
-#                                   (containing bin, lib, etc)
-#   SQUISH_SERVER_EXECUTABLE        The squishserver executable
-#   SQUISH_CLIENT_EXECUTABLE        The squishrunner executable
-#
-#
-#
-# ::
-#
-#   SQUISH_INSTALL_DIR_FOUND        Was the install directory found?
-#   SQUISH_SERVER_EXECUTABLE_FOUND  Was the server executable found?
-#   SQUISH_CLIENT_EXECUTABLE_FOUND  Was the client executable found?
-#
-#
-#
-# It provides the function squish_v4_add_test() for adding a squish test
-# to cmake using Squish 4.x:
-#
-# ::
-#
-#    squish_v4_add_test(cmakeTestName
-#      AUT targetName SUITE suiteName TEST squishTestName
-#      [SETTINGSGROUP group] [PRE_COMMAND command] [POST_COMMAND command] )
-#
-#
-#
-# The arguments have the following meaning:
-#
-# ``cmakeTestName``
-#   this will be used as the first argument for add_test()
-# ``AUT targetName``
-#   the name of the cmake target which will be used as AUT, i.e. the
-#   executable which will be tested.
-# ``SUITE suiteName``
-#   this is either the full path to the squish suite, or just the
-#   last directory of the suite, i.e. the suite name. In this case
-#   the CMakeLists.txt which calls squish_add_test() must be located
-#   in the parent directory of the suite directory.
-# ``TEST squishTestName``
-#   the name of the squish test, i.e. the name of the subdirectory
-#   of the test inside the suite directory.
-# ``SETTINGSGROUP group``
-#   if specified, the given settings group will be used for executing the test.
-#   If not specified, the groupname will be "CTest_<username>"
-# ``PRE_COMMAND command``
-#   if specified, the given command will be executed before starting the squish test.
-# ``POST_COMMAND command``
-#   same as PRE_COMMAND, but after the squish test has been executed.
-#
-#
-#
-# ::
-#
-#    enable_testing()
-#    find_package(Squish 4.0)
-#    if (SQUISH_FOUND)
-#       squish_v4_add_test(myTestName
-#         AUT myApp
-#         SUITE ${CMAKE_SOURCE_DIR}/tests/mySuite
-#         TEST someSquishTest
-#         SETTINGSGROUP myGroup
-#         )
-#    endif ()
-#
-#
-#
-#
-#
-# For users of Squish version 3.x the macro squish_v3_add_test() is
-# provided:
-#
-# ::
-#
-#    squish_v3_add_test(testName applicationUnderTest testCase envVars testWrapper)
-#    Use this macro to add a test using Squish 3.x.
-#
-#
-#
-# ::
-#
-#   enable_testing()
-#   find_package(Squish)
-#   if (SQUISH_FOUND)
-#     squish_v3_add_test(myTestName myApplication testCase envVars testWrapper)
-#   endif ()
-#
-#
-#
-# macro SQUISH_ADD_TEST(testName applicationUnderTest testCase envVars
-# testWrapper)
-#
-# ::
-#
-#    This is deprecated. Use SQUISH_V3_ADD_TEST() if you are using Squish 3.x instead.
+#[=======================================================================[.rst:
+FindSquish
+----------
+
+-- Typical Use
+
+
+
+This module can be used to find Squish.  Currently Squish versions 3
+and 4 are supported.
+
+::
+
+  SQUISH_FOUND                    If false, don't try to use Squish
+  SQUISH_VERSION                  The full version of Squish found
+  SQUISH_VERSION_MAJOR            The major version of Squish found
+  SQUISH_VERSION_MINOR            The minor version of Squish found
+  SQUISH_VERSION_PATCH            The patch version of Squish found
+
+
+
+::
+
+  SQUISH_INSTALL_DIR              The Squish installation directory
+                                  (containing bin, lib, etc)
+  SQUISH_SERVER_EXECUTABLE        The squishserver executable
+  SQUISH_CLIENT_EXECUTABLE        The squishrunner executable
+
+
+
+::
+
+  SQUISH_INSTALL_DIR_FOUND        Was the install directory found?
+  SQUISH_SERVER_EXECUTABLE_FOUND  Was the server executable found?
+  SQUISH_CLIENT_EXECUTABLE_FOUND  Was the client executable found?
+
+
+
+It provides the function squish_v4_add_test() for adding a squish test
+to cmake using Squish 4.x:
+
+::
+
+   squish_v4_add_test(cmakeTestName
+     AUT targetName SUITE suiteName TEST squishTestName
+     [SETTINGSGROUP group] [PRE_COMMAND command] [POST_COMMAND command] )
+
+
+
+The arguments have the following meaning:
+
+``cmakeTestName``
+  this will be used as the first argument for add_test()
+``AUT targetName``
+  the name of the cmake target which will be used as AUT, i.e. the
+  executable which will be tested.
+``SUITE suiteName``
+  this is either the full path to the squish suite, or just the
+  last directory of the suite, i.e. the suite name. In this case
+  the CMakeLists.txt which calls squish_add_test() must be located
+  in the parent directory of the suite directory.
+``TEST squishTestName``
+  the name of the squish test, i.e. the name of the subdirectory
+  of the test inside the suite directory.
+``SETTINGSGROUP group``
+  if specified, the given settings group will be used for executing the test.
+  If not specified, the groupname will be "CTest_<username>"
+``PRE_COMMAND command``
+  if specified, the given command will be executed before starting the squish test.
+``POST_COMMAND command``
+  same as PRE_COMMAND, but after the squish test has been executed.
+
+
+
+::
+
+   enable_testing()
+   find_package(Squish 4.0)
+   if (SQUISH_FOUND)
+      squish_v4_add_test(myTestName
+        AUT myApp
+        SUITE ${CMAKE_SOURCE_DIR}/tests/mySuite
+        TEST someSquishTest
+        SETTINGSGROUP myGroup
+        )
+   endif ()
+
+
+
+
+
+For users of Squish version 3.x the macro squish_v3_add_test() is
+provided:
+
+::
+
+   squish_v3_add_test(testName applicationUnderTest testCase envVars testWrapper)
+   Use this macro to add a test using Squish 3.x.
+
+
+
+::
+
+  enable_testing()
+  find_package(Squish)
+  if (SQUISH_FOUND)
+    squish_v3_add_test(myTestName myApplication testCase envVars testWrapper)
+  endif ()
+
+
+
+macro SQUISH_ADD_TEST(testName applicationUnderTest testCase envVars
+testWrapper)
+
+::
+
+   This is deprecated. Use SQUISH_V3_ADD_TEST() if you are using Squish 3.x instead.
+#]=======================================================================]
 
 set(SQUISH_INSTALL_DIR_STRING "Directory containing the bin, doc, and lib directories for Squish; this should be the root of the installation directory.")
 set(SQUISH_SERVER_EXECUTABLE_STRING "The squishserver executable program.")
diff --git a/Modules/FindSubversion.cmake b/Modules/FindSubversion.cmake
index e18ae88..ce280e2 100644
--- a/Modules/FindSubversion.cmake
+++ b/Modules/FindSubversion.cmake
@@ -1,68 +1,69 @@
 # Distributed under the OSI-approved BSD 3-Clause License.  See accompanying
 # file Copyright.txt or https://cmake.org/licensing for details.
 
-#.rst:
-# FindSubversion
-# --------------
-#
-# Extract information from a subversion working copy
-#
-# The module defines the following variables:
-#
-# ::
-#
-#   Subversion_SVN_EXECUTABLE - path to svn command line client
-#   Subversion_VERSION_SVN - version of svn command line client
-#   Subversion_FOUND - true if the command line client was found
-#   SUBVERSION_FOUND - same as Subversion_FOUND, set for compatibility reasons
-#
-#
-#
-# The minimum required version of Subversion can be specified using the
-# standard syntax, e.g. ``find_package(Subversion 1.4)``.
-#
-# If the command line client executable is found two macros are defined:
-#
-# ::
-#
-#   Subversion_WC_INFO(<dir> <var-prefix> [IGNORE_SVN_FAILURE])
-#   Subversion_WC_LOG(<dir> <var-prefix>)
-#
-# ``Subversion_WC_INFO`` extracts information of a subversion working copy at a
-# given location.  This macro defines the following variables if running
-# Subversion's ``info`` command on ``<dir>`` succeeds; otherwise a
-# ``SEND_ERROR`` message is generated. The error can be ignored by providing the
-# ``IGNORE_SVN_FAILURE`` option, which causes these variables to remain
-# undefined.
-#
-# ::
-#
-#   <var-prefix>_WC_URL - url of the repository (at <dir>)
-#   <var-prefix>_WC_ROOT - root url of the repository
-#   <var-prefix>_WC_REVISION - current revision
-#   <var-prefix>_WC_LAST_CHANGED_AUTHOR - author of last commit
-#   <var-prefix>_WC_LAST_CHANGED_DATE - date of last commit
-#   <var-prefix>_WC_LAST_CHANGED_REV - revision of last commit
-#   <var-prefix>_WC_INFO - output of command `svn info <dir>'
-#
-# ``Subversion_WC_LOG`` retrieves the log message of the base revision of a
-# subversion working copy at a given location.  This macro defines the variable:
-#
-# ::
-#
-#   <var-prefix>_LAST_CHANGED_LOG - last log of base revision
-#
-# Example usage:
-#
-# ::
-#
-#   find_package(Subversion)
-#   if(SUBVERSION_FOUND)
-#     Subversion_WC_INFO(${PROJECT_SOURCE_DIR} Project)
-#     message("Current revision is ${Project_WC_REVISION}")
-#     Subversion_WC_LOG(${PROJECT_SOURCE_DIR} Project)
-#     message("Last changed log is ${Project_LAST_CHANGED_LOG}")
-#   endif()
+#[=======================================================================[.rst:
+FindSubversion
+--------------
+
+Extract information from a subversion working copy
+
+The module defines the following variables:
+
+::
+
+  Subversion_SVN_EXECUTABLE - path to svn command line client
+  Subversion_VERSION_SVN - version of svn command line client
+  Subversion_FOUND - true if the command line client was found
+  SUBVERSION_FOUND - same as Subversion_FOUND, set for compatibility reasons
+
+
+
+The minimum required version of Subversion can be specified using the
+standard syntax, e.g. ``find_package(Subversion 1.4)``.
+
+If the command line client executable is found two macros are defined:
+
+::
+
+  Subversion_WC_INFO(<dir> <var-prefix> [IGNORE_SVN_FAILURE])
+  Subversion_WC_LOG(<dir> <var-prefix>)
+
+``Subversion_WC_INFO`` extracts information of a subversion working copy at a
+given location.  This macro defines the following variables if running
+Subversion's ``info`` command on ``<dir>`` succeeds; otherwise a
+``SEND_ERROR`` message is generated. The error can be ignored by providing the
+``IGNORE_SVN_FAILURE`` option, which causes these variables to remain
+undefined.
+
+::
+
+  <var-prefix>_WC_URL - url of the repository (at <dir>)
+  <var-prefix>_WC_ROOT - root url of the repository
+  <var-prefix>_WC_REVISION - current revision
+  <var-prefix>_WC_LAST_CHANGED_AUTHOR - author of last commit
+  <var-prefix>_WC_LAST_CHANGED_DATE - date of last commit
+  <var-prefix>_WC_LAST_CHANGED_REV - revision of last commit
+  <var-prefix>_WC_INFO - output of command `svn info <dir>'
+
+``Subversion_WC_LOG`` retrieves the log message of the base revision of a
+subversion working copy at a given location.  This macro defines the variable:
+
+::
+
+  <var-prefix>_LAST_CHANGED_LOG - last log of base revision
+
+Example usage:
+
+::
+
+  find_package(Subversion)
+  if(SUBVERSION_FOUND)
+    Subversion_WC_INFO(${PROJECT_SOURCE_DIR} Project)
+    message("Current revision is ${Project_WC_REVISION}")
+    Subversion_WC_LOG(${PROJECT_SOURCE_DIR} Project)
+    message("Last changed log is ${Project_LAST_CHANGED_LOG}")
+  endif()
+#]=======================================================================]
 
 find_program(Subversion_SVN_EXECUTABLE svn
   PATHS
diff --git a/Modules/FindTCL.cmake b/Modules/FindTCL.cmake
index ad16e0d..be47c39 100644
--- a/Modules/FindTCL.cmake
+++ b/Modules/FindTCL.cmake
@@ -1,48 +1,49 @@
 # Distributed under the OSI-approved BSD 3-Clause License.  See accompanying
 # file Copyright.txt or https://cmake.org/licensing for details.
 
-#.rst:
-# FindTCL
-# -------
-#
-# TK_INTERNAL_PATH was removed.
-#
-# This module finds if Tcl is installed and determines where the include
-# files and libraries are.  It also determines what the name of the
-# library is.  This code sets the following variables:
-#
-# ::
-#
-#   TCL_FOUND              = Tcl was found
-#   TK_FOUND               = Tk was found
-#   TCLTK_FOUND            = Tcl and Tk were found
-#   TCL_LIBRARY            = path to Tcl library (tcl tcl80)
-#   TCL_INCLUDE_PATH       = path to where tcl.h can be found
-#   TCL_TCLSH              = path to tclsh binary (tcl tcl80)
-#   TK_LIBRARY             = path to Tk library (tk tk80 etc)
-#   TK_INCLUDE_PATH        = path to where tk.h can be found
-#   TK_WISH                = full path to the wish executable
-#
-#
-#
-# In an effort to remove some clutter and clear up some issues for
-# people who are not necessarily Tcl/Tk gurus/developers, some
-# variables were moved or removed.  Changes compared to CMake 2.4 are:
-#
-# ::
-#
-#    => they were only useful for people writing Tcl/Tk extensions.
-#    => these libs are not packaged by default with Tcl/Tk distributions.
-#       Even when Tcl/Tk is built from source, several flavors of debug libs
-#       are created and there is no real reason to pick a single one
-#       specifically (say, amongst tcl84g, tcl84gs, or tcl84sgx).
-#       Let's leave that choice to the user by allowing him to assign
-#       TCL_LIBRARY to any Tcl library, debug or not.
-#    => this ended up being only a Win32 variable, and there is a lot of
-#       confusion regarding the location of this file in an installed Tcl/Tk
-#       tree anyway (see 8.5 for example). If you need the internal path at
-#       this point it is safer you ask directly where the *source* tree is
-#       and dig from there.
+#[=======================================================================[.rst:
+FindTCL
+-------
+
+TK_INTERNAL_PATH was removed.
+
+This module finds if Tcl is installed and determines where the include
+files and libraries are.  It also determines what the name of the
+library is.  This code sets the following variables:
+
+::
+
+  TCL_FOUND              = Tcl was found
+  TK_FOUND               = Tk was found
+  TCLTK_FOUND            = Tcl and Tk were found
+  TCL_LIBRARY            = path to Tcl library (tcl tcl80)
+  TCL_INCLUDE_PATH       = path to where tcl.h can be found
+  TCL_TCLSH              = path to tclsh binary (tcl tcl80)
+  TK_LIBRARY             = path to Tk library (tk tk80 etc)
+  TK_INCLUDE_PATH        = path to where tk.h can be found
+  TK_WISH                = full path to the wish executable
+
+
+
+In an effort to remove some clutter and clear up some issues for
+people who are not necessarily Tcl/Tk gurus/developers, some
+variables were moved or removed.  Changes compared to CMake 2.4 are:
+
+::
+
+   => they were only useful for people writing Tcl/Tk extensions.
+   => these libs are not packaged by default with Tcl/Tk distributions.
+      Even when Tcl/Tk is built from source, several flavors of debug libs
+      are created and there is no real reason to pick a single one
+      specifically (say, amongst tcl84g, tcl84gs, or tcl84sgx).
+      Let's leave that choice to the user by allowing him to assign
+      TCL_LIBRARY to any Tcl library, debug or not.
+   => this ended up being only a Win32 variable, and there is a lot of
+      confusion regarding the location of this file in an installed Tcl/Tk
+      tree anyway (see 8.5 for example). If you need the internal path at
+      this point it is safer you ask directly where the *source* tree is
+      and dig from there.
+#]=======================================================================]
 
 include(${CMAKE_CURRENT_LIST_DIR}/CMakeFindFrameworks.cmake)
 include(${CMAKE_CURRENT_LIST_DIR}/FindTclsh.cmake)
diff --git a/Modules/FindTIFF.cmake b/Modules/FindTIFF.cmake
index b622ca6..63ca936 100644
--- a/Modules/FindTIFF.cmake
+++ b/Modules/FindTIFF.cmake
@@ -1,43 +1,44 @@
 # Distributed under the OSI-approved BSD 3-Clause License.  See accompanying
 # file Copyright.txt or https://cmake.org/licensing for details.
 
-#.rst:
-# FindTIFF
-# --------
-#
-# Find the TIFF library (libtiff).
-#
-# Imported targets
-# ^^^^^^^^^^^^^^^^
-#
-# This module defines the following :prop_tgt:`IMPORTED` targets:
-#
-# ``TIFF::TIFF``
-#   The TIFF library, if found.
-#
-# Result variables
-# ^^^^^^^^^^^^^^^^
-#
-# This module will set the following variables in your project:
-#
-# ``TIFF_FOUND``
-#   true if the TIFF headers and libraries were found
-# ``TIFF_INCLUDE_DIR``
-#   the directory containing the TIFF headers
-# ``TIFF_INCLUDE_DIRS``
-#   the directory containing the TIFF headers
-# ``TIFF_LIBRARIES``
-#   TIFF libraries to be linked
-#
-# Cache variables
-# ^^^^^^^^^^^^^^^
-#
-# The following cache variables may also be set:
-#
-# ``TIFF_INCLUDE_DIR``
-#   the directory containing the TIFF headers
-# ``TIFF_LIBRARY``
-#   the path to the TIFF library
+#[=======================================================================[.rst:
+FindTIFF
+--------
+
+Find the TIFF library (libtiff).
+
+Imported targets
+^^^^^^^^^^^^^^^^
+
+This module defines the following :prop_tgt:`IMPORTED` targets:
+
+``TIFF::TIFF``
+  The TIFF library, if found.
+
+Result variables
+^^^^^^^^^^^^^^^^
+
+This module will set the following variables in your project:
+
+``TIFF_FOUND``
+  true if the TIFF headers and libraries were found
+``TIFF_INCLUDE_DIR``
+  the directory containing the TIFF headers
+``TIFF_INCLUDE_DIRS``
+  the directory containing the TIFF headers
+``TIFF_LIBRARIES``
+  TIFF libraries to be linked
+
+Cache variables
+^^^^^^^^^^^^^^^
+
+The following cache variables may also be set:
+
+``TIFF_INCLUDE_DIR``
+  the directory containing the TIFF headers
+``TIFF_LIBRARY``
+  the path to the TIFF library
+#]=======================================================================]
 
 find_path(TIFF_INCLUDE_DIR tiff.h)
 
diff --git a/Modules/FindTclStub.cmake b/Modules/FindTclStub.cmake
index db0a7a1..8f63480 100644
--- a/Modules/FindTclStub.cmake
+++ b/Modules/FindTclStub.cmake
@@ -1,48 +1,49 @@
 # Distributed under the OSI-approved BSD 3-Clause License.  See accompanying
 # file Copyright.txt or https://cmake.org/licensing for details.
 
-#.rst:
-# FindTclStub
-# -----------
-#
-# TCL_STUB_LIBRARY_DEBUG and TK_STUB_LIBRARY_DEBUG were removed.
-#
-# This module finds Tcl stub libraries.  It first finds Tcl include
-# files and libraries by calling FindTCL.cmake.  How to Use the Tcl
-# Stubs Library:
-#
-# ::
-#
-#    http://tcl.activestate.com/doc/howto/stubs.html
-#
-# Using Stub Libraries:
-#
-# ::
-#
-#    http://safari.oreilly.com/0130385603/ch48lev1sec3
-#
-# This code sets the following variables:
-#
-# ::
-#
-#   TCL_STUB_LIBRARY       = path to Tcl stub library
-#   TK_STUB_LIBRARY        = path to Tk stub library
-#   TTK_STUB_LIBRARY       = path to ttk stub library
-#
-#
-#
-# In an effort to remove some clutter and clear up some issues for
-# people who are not necessarily Tcl/Tk gurus/developers, some
-# variables were moved or removed.  Changes compared to CMake 2.4 are:
-#
-# ::
-#
-#    => these libs are not packaged by default with Tcl/Tk distributions.
-#       Even when Tcl/Tk is built from source, several flavors of debug libs
-#       are created and there is no real reason to pick a single one
-#       specifically (say, amongst tclstub84g, tclstub84gs, or tclstub84sgx).
-#       Let's leave that choice to the user by allowing him to assign
-#       TCL_STUB_LIBRARY to any Tcl library, debug or not.
+#[=======================================================================[.rst:
+FindTclStub
+-----------
+
+TCL_STUB_LIBRARY_DEBUG and TK_STUB_LIBRARY_DEBUG were removed.
+
+This module finds Tcl stub libraries.  It first finds Tcl include
+files and libraries by calling FindTCL.cmake.  How to Use the Tcl
+Stubs Library:
+
+::
+
+   http://tcl.activestate.com/doc/howto/stubs.html
+
+Using Stub Libraries:
+
+::
+
+   http://safari.oreilly.com/0130385603/ch48lev1sec3
+
+This code sets the following variables:
+
+::
+
+  TCL_STUB_LIBRARY       = path to Tcl stub library
+  TK_STUB_LIBRARY        = path to Tk stub library
+  TTK_STUB_LIBRARY       = path to ttk stub library
+
+
+
+In an effort to remove some clutter and clear up some issues for
+people who are not necessarily Tcl/Tk gurus/developers, some
+variables were moved or removed.  Changes compared to CMake 2.4 are:
+
+::
+
+   => these libs are not packaged by default with Tcl/Tk distributions.
+      Even when Tcl/Tk is built from source, several flavors of debug libs
+      are created and there is no real reason to pick a single one
+      specifically (say, amongst tclstub84g, tclstub84gs, or tclstub84sgx).
+      Let's leave that choice to the user by allowing him to assign
+      TCL_STUB_LIBRARY to any Tcl library, debug or not.
+#]=======================================================================]
 
 include(${CMAKE_CURRENT_LIST_DIR}/FindTCL.cmake)
 
diff --git a/Modules/FindTclsh.cmake b/Modules/FindTclsh.cmake
index 9bf935d..e3bd110 100644
--- a/Modules/FindTclsh.cmake
+++ b/Modules/FindTclsh.cmake
@@ -1,23 +1,24 @@
 # Distributed under the OSI-approved BSD 3-Clause License.  See accompanying
 # file Copyright.txt or https://cmake.org/licensing for details.
 
-#.rst:
-# FindTclsh
-# ---------
-#
-# Find tclsh
-#
-# This module finds if TCL is installed and determines where the include
-# files and libraries are.  It also determines what the name of the
-# library is.  This code sets the following variables:
-#
-# ::
-#
-#   TCLSH_FOUND = TRUE if tclsh has been found
-#   TCL_TCLSH = the path to the tclsh executable
-#
-# In cygwin, look for the cygwin version first.  Don't look for it later
-# to avoid finding the cygwin version on a Win32 build.
+#[=======================================================================[.rst:
+FindTclsh
+---------
+
+Find tclsh
+
+This module finds if TCL is installed and determines where the include
+files and libraries are.  It also determines what the name of the
+library is.  This code sets the following variables:
+
+::
+
+  TCLSH_FOUND = TRUE if tclsh has been found
+  TCL_TCLSH = the path to the tclsh executable
+
+In cygwin, look for the cygwin version first.  Don't look for it later
+to avoid finding the cygwin version on a Win32 build.
+#]=======================================================================]
 
 if(CYGWIN)
   find_program(TCL_TCLSH NAMES cygtclsh83 cygtclsh80)
diff --git a/Modules/FindThreads.cmake b/Modules/FindThreads.cmake
index a0148dd..2211081 100644
--- a/Modules/FindThreads.cmake
+++ b/Modules/FindThreads.cmake
@@ -1,44 +1,45 @@
 # Distributed under the OSI-approved BSD 3-Clause License.  See accompanying
 # file Copyright.txt or https://cmake.org/licensing for details.
 
-#.rst:
-# FindThreads
-# -----------
-#
-# This module determines the thread library of the system.
-#
-# The following variables are set
-#
-# ::
-#
-#   CMAKE_THREAD_LIBS_INIT     - the thread library
-#   CMAKE_USE_SPROC_INIT       - are we using sproc?
-#   CMAKE_USE_WIN32_THREADS_INIT - using WIN32 threads?
-#   CMAKE_USE_PTHREADS_INIT    - are we using pthreads
-#   CMAKE_HP_PTHREADS_INIT     - are we using hp pthreads
-#
-# The following import target is created
-#
-# ::
-#
-#   Threads::Threads
-#
-# For systems with multiple thread libraries, caller can set
-#
-# ::
-#
-#   CMAKE_THREAD_PREFER_PTHREAD
-#
-# If the use of the -pthread compiler and linker flag is preferred then the
-# caller can set
-#
-# ::
-#
-#   THREADS_PREFER_PTHREAD_FLAG
-#
-# Please note that the compiler flag can only be used with the imported
-# target. Use of both the imported target as well as this switch is highly
-# recommended for new code.
+#[=======================================================================[.rst:
+FindThreads
+-----------
+
+This module determines the thread library of the system.
+
+The following variables are set
+
+::
+
+  CMAKE_THREAD_LIBS_INIT     - the thread library
+  CMAKE_USE_SPROC_INIT       - are we using sproc?
+  CMAKE_USE_WIN32_THREADS_INIT - using WIN32 threads?
+  CMAKE_USE_PTHREADS_INIT    - are we using pthreads
+  CMAKE_HP_PTHREADS_INIT     - are we using hp pthreads
+
+The following import target is created
+
+::
+
+  Threads::Threads
+
+For systems with multiple thread libraries, caller can set
+
+::
+
+  CMAKE_THREAD_PREFER_PTHREAD
+
+If the use of the -pthread compiler and linker flag is preferred then the
+caller can set
+
+::
+
+  THREADS_PREFER_PTHREAD_FLAG
+
+Please note that the compiler flag can only be used with the imported
+target. Use of both the imported target as well as this switch is highly
+recommended for new code.
+#]=======================================================================]
 
 include (CheckLibraryExists)
 include (CheckSymbolExists)
diff --git a/Modules/FindUnixCommands.cmake b/Modules/FindUnixCommands.cmake
index 45047a9..3a735f7 100644
--- a/Modules/FindUnixCommands.cmake
+++ b/Modules/FindUnixCommands.cmake
@@ -1,14 +1,15 @@
 # Distributed under the OSI-approved BSD 3-Clause License.  See accompanying
 # file Copyright.txt or https://cmake.org/licensing for details.
 
-#.rst:
-# FindUnixCommands
-# ----------------
-#
-# Find Unix commands, including the ones from Cygwin
-#
-# This module looks for the Unix commands bash, cp, gzip, mv, rm, and tar
-# and stores the result in the variables BASH, CP, GZIP, MV, RM, and TAR.
+#[=======================================================================[.rst:
+FindUnixCommands
+----------------
+
+Find Unix commands, including the ones from Cygwin
+
+This module looks for the Unix commands bash, cp, gzip, mv, rm, and tar
+and stores the result in the variables BASH, CP, GZIP, MV, RM, and TAR.
+#]=======================================================================]
 
 include(${CMAKE_CURRENT_LIST_DIR}/FindCygwin.cmake)
 
diff --git a/Modules/FindVulkan.cmake b/Modules/FindVulkan.cmake
index 4c60ed7..b1201b4 100644
--- a/Modules/FindVulkan.cmake
+++ b/Modules/FindVulkan.cmake
@@ -1,32 +1,33 @@
 # Distributed under the OSI-approved BSD 3-Clause License.  See accompanying
 # file Copyright.txt or https://cmake.org/licensing for details.
 
-#.rst:
-# FindVulkan
-# ----------
-#
-# Try to find Vulkan
-#
-# IMPORTED Targets
-# ^^^^^^^^^^^^^^^^
-#
-# This module defines :prop_tgt:`IMPORTED` target ``Vulkan::Vulkan``, if
-# Vulkan has been found.
-#
-# Result Variables
-# ^^^^^^^^^^^^^^^^
-#
-# This module defines the following variables::
-#
-#   Vulkan_FOUND          - True if Vulkan was found
-#   Vulkan_INCLUDE_DIRS   - include directories for Vulkan
-#   Vulkan_LIBRARIES      - link against this library to use Vulkan
-#
-# The module will also define two cache variables::
-#
-#   Vulkan_INCLUDE_DIR    - the Vulkan include directory
-#   Vulkan_LIBRARY        - the path to the Vulkan library
-#
+#[=======================================================================[.rst:
+FindVulkan
+----------
+
+Try to find Vulkan
+
+IMPORTED Targets
+^^^^^^^^^^^^^^^^
+
+This module defines :prop_tgt:`IMPORTED` target ``Vulkan::Vulkan``, if
+Vulkan has been found.
+
+Result Variables
+^^^^^^^^^^^^^^^^
+
+This module defines the following variables::
+
+  Vulkan_FOUND          - True if Vulkan was found
+  Vulkan_INCLUDE_DIRS   - include directories for Vulkan
+  Vulkan_LIBRARIES      - link against this library to use Vulkan
+
+The module will also define two cache variables::
+
+  Vulkan_INCLUDE_DIR    - the Vulkan include directory
+  Vulkan_LIBRARY        - the path to the Vulkan library
+
+#]=======================================================================]
 
 if(WIN32)
   find_path(Vulkan_INCLUDE_DIR
diff --git a/Modules/FindWget.cmake b/Modules/FindWget.cmake
index 4fcb2fa..bd01ec2 100644
--- a/Modules/FindWget.cmake
+++ b/Modules/FindWget.cmake
@@ -1,18 +1,19 @@
 # Distributed under the OSI-approved BSD 3-Clause License.  See accompanying
 # file Copyright.txt or https://cmake.org/licensing for details.
 
-#.rst:
-# FindWget
-# --------
-#
-# Find wget
-#
-# This module looks for wget.  This module defines the following values:
-#
-# ::
-#
-#   WGET_EXECUTABLE: the full path to the wget tool.
-#   WGET_FOUND: True if wget has been found.
+#[=======================================================================[.rst:
+FindWget
+--------
+
+Find wget
+
+This module looks for wget.  This module defines the following values:
+
+::
+
+  WGET_EXECUTABLE: the full path to the wget tool.
+  WGET_FOUND: True if wget has been found.
+#]=======================================================================]
 
 include(${CMAKE_CURRENT_LIST_DIR}/FindCygwin.cmake)
 
diff --git a/Modules/FindWish.cmake b/Modules/FindWish.cmake
index b64b041..b332bde 100644
--- a/Modules/FindWish.cmake
+++ b/Modules/FindWish.cmake
@@ -1,23 +1,24 @@
 # Distributed under the OSI-approved BSD 3-Clause License.  See accompanying
 # file Copyright.txt or https://cmake.org/licensing for details.
 
-#.rst:
-# FindWish
-# --------
-#
-# Find wish installation
-#
-# This module finds if TCL is installed and determines where the include
-# files and libraries are.  It also determines what the name of the
-# library is.  This code sets the following variables:
-#
-# ::
-#
-#   TK_WISH = the path to the wish executable
-#
-#
-#
-# if UNIX is defined, then it will look for the cygwin version first
+#[=======================================================================[.rst:
+FindWish
+--------
+
+Find wish installation
+
+This module finds if TCL is installed and determines where the include
+files and libraries are.  It also determines what the name of the
+library is.  This code sets the following variables:
+
+::
+
+  TK_WISH = the path to the wish executable
+
+
+
+if UNIX is defined, then it will look for the cygwin version first
+#]=======================================================================]
 
 if(UNIX)
   find_program(TK_WISH cygwish80 )
diff --git a/Modules/FindX11.cmake b/Modules/FindX11.cmake
index f7dfc82..232804a 100644
--- a/Modules/FindX11.cmake
+++ b/Modules/FindX11.cmake
@@ -1,58 +1,59 @@
 # Distributed under the OSI-approved BSD 3-Clause License.  See accompanying
 # file Copyright.txt or https://cmake.org/licensing for details.
 
-#.rst:
-# FindX11
-# -------
-#
-# Find X11 installation
-#
-# Try to find X11 on UNIX systems. The following values are defined
-#
-# ::
-#
-#   X11_FOUND        - True if X11 is available
-#   X11_INCLUDE_DIR  - include directories to use X11
-#   X11_LIBRARIES    - link against these to use X11
-#
-# and also the following more fine grained variables:
-#
-# ::
-#
-#   X11_ICE_INCLUDE_PATH,          X11_ICE_LIB,        X11_ICE_FOUND
-#   X11_SM_INCLUDE_PATH,           X11_SM_LIB,         X11_SM_FOUND
-#   X11_X11_INCLUDE_PATH,          X11_X11_LIB
-#   X11_Xaccessrules_INCLUDE_PATH,                     X11_Xaccess_FOUND
-#   X11_Xaccessstr_INCLUDE_PATH,                       X11_Xaccess_FOUND
-#   X11_Xau_INCLUDE_PATH,          X11_Xau_LIB,        X11_Xau_FOUND
-#   X11_Xcomposite_INCLUDE_PATH,   X11_Xcomposite_LIB, X11_Xcomposite_FOUND
-#   X11_Xcursor_INCLUDE_PATH,      X11_Xcursor_LIB,    X11_Xcursor_FOUND
-#   X11_Xdamage_INCLUDE_PATH,      X11_Xdamage_LIB,    X11_Xdamage_FOUND
-#   X11_Xdmcp_INCLUDE_PATH,        X11_Xdmcp_LIB,      X11_Xdmcp_FOUND
-#   X11_Xext_LIB,       X11_Xext_FOUND
-#   X11_dpms_INCLUDE_PATH,         (in X11_Xext_LIB),  X11_dpms_FOUND
-#   X11_XShm_INCLUDE_PATH,         (in X11_Xext_LIB),  X11_XShm_FOUND
-#   X11_Xshape_INCLUDE_PATH,       (in X11_Xext_LIB),  X11_Xshape_FOUND
-#   X11_xf86misc_INCLUDE_PATH,     X11_Xxf86misc_LIB,  X11_xf86misc_FOUND
-#   X11_xf86vmode_INCLUDE_PATH,    X11_Xxf86vm_LIB     X11_xf86vmode_FOUND
-#   X11_Xfixes_INCLUDE_PATH,       X11_Xfixes_LIB,     X11_Xfixes_FOUND
-#   X11_Xft_INCLUDE_PATH,          X11_Xft_LIB,        X11_Xft_FOUND
-#   X11_Xi_INCLUDE_PATH,           X11_Xi_LIB,         X11_Xi_FOUND
-#   X11_Xinerama_INCLUDE_PATH,     X11_Xinerama_LIB,   X11_Xinerama_FOUND
-#   X11_Xinput_INCLUDE_PATH,       X11_Xinput_LIB,     X11_Xinput_FOUND
-#   X11_Xkb_INCLUDE_PATH,                              X11_Xkb_FOUND
-#   X11_Xkblib_INCLUDE_PATH,                           X11_Xkb_FOUND
-#   X11_Xkbfile_INCLUDE_PATH,      X11_Xkbfile_LIB,    X11_Xkbfile_FOUND
-#   X11_Xmu_INCLUDE_PATH,          X11_Xmu_LIB,        X11_Xmu_FOUND
-#   X11_Xpm_INCLUDE_PATH,          X11_Xpm_LIB,        X11_Xpm_FOUND
-#   X11_XTest_INCLUDE_PATH,        X11_XTest_LIB,      X11_XTest_FOUND
-#   X11_Xrandr_INCLUDE_PATH,       X11_Xrandr_LIB,     X11_Xrandr_FOUND
-#   X11_Xrender_INCLUDE_PATH,      X11_Xrender_LIB,    X11_Xrender_FOUND
-#   X11_Xscreensaver_INCLUDE_PATH, X11_Xscreensaver_LIB, X11_Xscreensaver_FOUND
-#   X11_Xt_INCLUDE_PATH,           X11_Xt_LIB,         X11_Xt_FOUND
-#   X11_Xutil_INCLUDE_PATH,                            X11_Xutil_FOUND
-#   X11_Xv_INCLUDE_PATH,           X11_Xv_LIB,         X11_Xv_FOUND
-#   X11_XSync_INCLUDE_PATH,        (in X11_Xext_LIB),  X11_XSync_FOUND
+#[=======================================================================[.rst:
+FindX11
+-------
+
+Find X11 installation
+
+Try to find X11 on UNIX systems. The following values are defined
+
+::
+
+  X11_FOUND        - True if X11 is available
+  X11_INCLUDE_DIR  - include directories to use X11
+  X11_LIBRARIES    - link against these to use X11
+
+and also the following more fine grained variables:
+
+::
+
+  X11_ICE_INCLUDE_PATH,          X11_ICE_LIB,        X11_ICE_FOUND
+  X11_SM_INCLUDE_PATH,           X11_SM_LIB,         X11_SM_FOUND
+  X11_X11_INCLUDE_PATH,          X11_X11_LIB
+  X11_Xaccessrules_INCLUDE_PATH,                     X11_Xaccess_FOUND
+  X11_Xaccessstr_INCLUDE_PATH,                       X11_Xaccess_FOUND
+  X11_Xau_INCLUDE_PATH,          X11_Xau_LIB,        X11_Xau_FOUND
+  X11_Xcomposite_INCLUDE_PATH,   X11_Xcomposite_LIB, X11_Xcomposite_FOUND
+  X11_Xcursor_INCLUDE_PATH,      X11_Xcursor_LIB,    X11_Xcursor_FOUND
+  X11_Xdamage_INCLUDE_PATH,      X11_Xdamage_LIB,    X11_Xdamage_FOUND
+  X11_Xdmcp_INCLUDE_PATH,        X11_Xdmcp_LIB,      X11_Xdmcp_FOUND
+  X11_Xext_LIB,       X11_Xext_FOUND
+  X11_dpms_INCLUDE_PATH,         (in X11_Xext_LIB),  X11_dpms_FOUND
+  X11_XShm_INCLUDE_PATH,         (in X11_Xext_LIB),  X11_XShm_FOUND
+  X11_Xshape_INCLUDE_PATH,       (in X11_Xext_LIB),  X11_Xshape_FOUND
+  X11_xf86misc_INCLUDE_PATH,     X11_Xxf86misc_LIB,  X11_xf86misc_FOUND
+  X11_xf86vmode_INCLUDE_PATH,    X11_Xxf86vm_LIB     X11_xf86vmode_FOUND
+  X11_Xfixes_INCLUDE_PATH,       X11_Xfixes_LIB,     X11_Xfixes_FOUND
+  X11_Xft_INCLUDE_PATH,          X11_Xft_LIB,        X11_Xft_FOUND
+  X11_Xi_INCLUDE_PATH,           X11_Xi_LIB,         X11_Xi_FOUND
+  X11_Xinerama_INCLUDE_PATH,     X11_Xinerama_LIB,   X11_Xinerama_FOUND
+  X11_Xinput_INCLUDE_PATH,       X11_Xinput_LIB,     X11_Xinput_FOUND
+  X11_Xkb_INCLUDE_PATH,                              X11_Xkb_FOUND
+  X11_Xkblib_INCLUDE_PATH,                           X11_Xkb_FOUND
+  X11_Xkbfile_INCLUDE_PATH,      X11_Xkbfile_LIB,    X11_Xkbfile_FOUND
+  X11_Xmu_INCLUDE_PATH,          X11_Xmu_LIB,        X11_Xmu_FOUND
+  X11_Xpm_INCLUDE_PATH,          X11_Xpm_LIB,        X11_Xpm_FOUND
+  X11_XTest_INCLUDE_PATH,        X11_XTest_LIB,      X11_XTest_FOUND
+  X11_Xrandr_INCLUDE_PATH,       X11_Xrandr_LIB,     X11_Xrandr_FOUND
+  X11_Xrender_INCLUDE_PATH,      X11_Xrender_LIB,    X11_Xrender_FOUND
+  X11_Xscreensaver_INCLUDE_PATH, X11_Xscreensaver_LIB, X11_Xscreensaver_FOUND
+  X11_Xt_INCLUDE_PATH,           X11_Xt_LIB,         X11_Xt_FOUND
+  X11_Xutil_INCLUDE_PATH,                            X11_Xutil_FOUND
+  X11_Xv_INCLUDE_PATH,           X11_Xv_LIB,         X11_Xv_FOUND
+  X11_XSync_INCLUDE_PATH,        (in X11_Xext_LIB),  X11_XSync_FOUND
+#]=======================================================================]
 
 if (UNIX)
   set(X11_FOUND 0)
diff --git a/Modules/FindXMLRPC.cmake b/Modules/FindXMLRPC.cmake
index e7ae919..69e6df2 100644
--- a/Modules/FindXMLRPC.cmake
+++ b/Modules/FindXMLRPC.cmake
@@ -1,35 +1,36 @@
 # Distributed under the OSI-approved BSD 3-Clause License.  See accompanying
 # file Copyright.txt or https://cmake.org/licensing for details.
 
-#.rst:
-# FindXMLRPC
-# ----------
-#
-# Find xmlrpc
-#
-# Find the native XMLRPC headers and libraries.
-#
-# ::
-#
-#   XMLRPC_INCLUDE_DIRS      - where to find xmlrpc.h, etc.
-#   XMLRPC_LIBRARIES         - List of libraries when using xmlrpc.
-#   XMLRPC_FOUND             - True if xmlrpc found.
-#
-# XMLRPC modules may be specified as components for this find module.
-# Modules may be listed by running "xmlrpc-c-config".  Modules include:
-#
-# ::
-#
-#   c++            C++ wrapper code
-#   libwww-client  libwww-based client
-#   cgi-server     CGI-based server
-#   abyss-server   ABYSS-based server
-#
-# Typical usage:
-#
-# ::
-#
-#   find_package(XMLRPC REQUIRED libwww-client)
+#[=======================================================================[.rst:
+FindXMLRPC
+----------
+
+Find xmlrpc
+
+Find the native XMLRPC headers and libraries.
+
+::
+
+  XMLRPC_INCLUDE_DIRS      - where to find xmlrpc.h, etc.
+  XMLRPC_LIBRARIES         - List of libraries when using xmlrpc.
+  XMLRPC_FOUND             - True if xmlrpc found.
+
+XMLRPC modules may be specified as components for this find module.
+Modules may be listed by running "xmlrpc-c-config".  Modules include:
+
+::
+
+  c++            C++ wrapper code
+  libwww-client  libwww-based client
+  cgi-server     CGI-based server
+  abyss-server   ABYSS-based server
+
+Typical usage:
+
+::
+
+  find_package(XMLRPC REQUIRED libwww-client)
+#]=======================================================================]
 
 # First find the config script from which to obtain other values.
 find_program(XMLRPC_C_CONFIG NAMES xmlrpc-c-config)
diff --git a/Modules/FindXalanC.cmake b/Modules/FindXalanC.cmake
index 1951b49..0eba3d9 100644
--- a/Modules/FindXalanC.cmake
+++ b/Modules/FindXalanC.cmake
@@ -1,45 +1,46 @@
 # Distributed under the OSI-approved BSD 3-Clause License.  See accompanying
 # file Copyright.txt or https://cmake.org/licensing for details.
 
-#.rst:
-# FindXalanC
-# -----------
-#
-# Find the Apache Xalan-C++ XSL transform processor headers and libraries.
-#
-# Imported targets
-# ^^^^^^^^^^^^^^^^
-#
-# This module defines the following :prop_tgt:`IMPORTED` targets:
-#
-# ``XalanC::XalanC``
-#   The Xalan-C++ ``xalan-c`` library, if found.
-#
-# Result variables
-# ^^^^^^^^^^^^^^^^
-#
-# This module will set the following variables in your project:
-#
-# ``XalanC_FOUND``
-#   true if the Xalan headers and libraries were found
-# ``XalanC_VERSION``
-#   Xalan release version
-# ``XalanC_INCLUDE_DIRS``
-#   the directory containing the Xalan headers; note
-#   ``XercesC_INCLUDE_DIRS`` is also required
-# ``XalanC_LIBRARIES``
-#   Xalan libraries to be linked; note ``XercesC_LIBRARIES`` is also
-#   required
-#
-# Cache variables
-# ^^^^^^^^^^^^^^^
-#
-# The following cache variables may also be set:
-#
-# ``XalanC_INCLUDE_DIR``
-#   the directory containing the Xalan headers
-# ``XalanC_LIBRARY``
-#   the Xalan library
+#[=======================================================================[.rst:
+FindXalanC
+-----------
+
+Find the Apache Xalan-C++ XSL transform processor headers and libraries.
+
+Imported targets
+^^^^^^^^^^^^^^^^
+
+This module defines the following :prop_tgt:`IMPORTED` targets:
+
+``XalanC::XalanC``
+  The Xalan-C++ ``xalan-c`` library, if found.
+
+Result variables
+^^^^^^^^^^^^^^^^
+
+This module will set the following variables in your project:
+
+``XalanC_FOUND``
+  true if the Xalan headers and libraries were found
+``XalanC_VERSION``
+  Xalan release version
+``XalanC_INCLUDE_DIRS``
+  the directory containing the Xalan headers; note
+  ``XercesC_INCLUDE_DIRS`` is also required
+``XalanC_LIBRARIES``
+  Xalan libraries to be linked; note ``XercesC_LIBRARIES`` is also
+  required
+
+Cache variables
+^^^^^^^^^^^^^^^
+
+The following cache variables may also be set:
+
+``XalanC_INCLUDE_DIR``
+  the directory containing the Xalan headers
+``XalanC_LIBRARY``
+  the Xalan library
+#]=======================================================================]
 
 # Written by Roger Leigh <rleigh@codelibre.net>
 
diff --git a/Modules/FindXercesC.cmake b/Modules/FindXercesC.cmake
index 55db7ae..085fafc 100644
--- a/Modules/FindXercesC.cmake
+++ b/Modules/FindXercesC.cmake
@@ -1,43 +1,44 @@
 # Distributed under the OSI-approved BSD 3-Clause License.  See accompanying
 # file Copyright.txt or https://cmake.org/licensing for details.
 
-#.rst:
-# FindXercesC
-# -----------
-#
-# Find the Apache Xerces-C++ validating XML parser headers and libraries.
-#
-# Imported targets
-# ^^^^^^^^^^^^^^^^
-#
-# This module defines the following :prop_tgt:`IMPORTED` targets:
-#
-# ``XercesC::XercesC``
-#   The Xerces-C++ ``xerces-c`` library, if found.
-#
-# Result variables
-# ^^^^^^^^^^^^^^^^
-#
-# This module will set the following variables in your project:
-#
-# ``XercesC_FOUND``
-#   true if the Xerces headers and libraries were found
-# ``XercesC_VERSION``
-#   Xerces release version
-# ``XercesC_INCLUDE_DIRS``
-#   the directory containing the Xerces headers
-# ``XercesC_LIBRARIES``
-#   Xerces libraries to be linked
-#
-# Cache variables
-# ^^^^^^^^^^^^^^^
-#
-# The following cache variables may also be set:
-#
-# ``XercesC_INCLUDE_DIR``
-#   the directory containing the Xerces headers
-# ``XercesC_LIBRARY``
-#   the Xerces library
+#[=======================================================================[.rst:
+FindXercesC
+-----------
+
+Find the Apache Xerces-C++ validating XML parser headers and libraries.
+
+Imported targets
+^^^^^^^^^^^^^^^^
+
+This module defines the following :prop_tgt:`IMPORTED` targets:
+
+``XercesC::XercesC``
+  The Xerces-C++ ``xerces-c`` library, if found.
+
+Result variables
+^^^^^^^^^^^^^^^^
+
+This module will set the following variables in your project:
+
+``XercesC_FOUND``
+  true if the Xerces headers and libraries were found
+``XercesC_VERSION``
+  Xerces release version
+``XercesC_INCLUDE_DIRS``
+  the directory containing the Xerces headers
+``XercesC_LIBRARIES``
+  Xerces libraries to be linked
+
+Cache variables
+^^^^^^^^^^^^^^^
+
+The following cache variables may also be set:
+
+``XercesC_INCLUDE_DIR``
+  the directory containing the Xerces headers
+``XercesC_LIBRARY``
+  the Xerces library
+#]=======================================================================]
 
 # Written by Roger Leigh <rleigh@codelibre.net>
 
diff --git a/Modules/FindZLIB.cmake b/Modules/FindZLIB.cmake
index 1a4635a..790eb42 100644
--- a/Modules/FindZLIB.cmake
+++ b/Modules/FindZLIB.cmake
@@ -1,53 +1,54 @@
 # Distributed under the OSI-approved BSD 3-Clause License.  See accompanying
 # file Copyright.txt or https://cmake.org/licensing for details.
 
-#.rst:
-# FindZLIB
-# --------
-#
-# Find the native ZLIB includes and library.
-#
-# IMPORTED Targets
-# ^^^^^^^^^^^^^^^^
-#
-# This module defines :prop_tgt:`IMPORTED` target ``ZLIB::ZLIB``, if
-# ZLIB has been found.
-#
-# Result Variables
-# ^^^^^^^^^^^^^^^^
-#
-# This module defines the following variables:
-#
-# ::
-#
-#   ZLIB_INCLUDE_DIRS   - where to find zlib.h, etc.
-#   ZLIB_LIBRARIES      - List of libraries when using zlib.
-#   ZLIB_FOUND          - True if zlib found.
-#
-# ::
-#
-#   ZLIB_VERSION_STRING - The version of zlib found (x.y.z)
-#   ZLIB_VERSION_MAJOR  - The major version of zlib
-#   ZLIB_VERSION_MINOR  - The minor version of zlib
-#   ZLIB_VERSION_PATCH  - The patch version of zlib
-#   ZLIB_VERSION_TWEAK  - The tweak version of zlib
-#
-# Backward Compatibility
-# ^^^^^^^^^^^^^^^^^^^^^^
-#
-# The following variable are provided for backward compatibility
-#
-# ::
-#
-#   ZLIB_MAJOR_VERSION  - The major version of zlib
-#   ZLIB_MINOR_VERSION  - The minor version of zlib
-#   ZLIB_PATCH_VERSION  - The patch version of zlib
-#
-# Hints
-# ^^^^^
-#
-# A user may set ``ZLIB_ROOT`` to a zlib installation root to tell this
-# module where to look.
+#[=======================================================================[.rst:
+FindZLIB
+--------
+
+Find the native ZLIB includes and library.
+
+IMPORTED Targets
+^^^^^^^^^^^^^^^^
+
+This module defines :prop_tgt:`IMPORTED` target ``ZLIB::ZLIB``, if
+ZLIB has been found.
+
+Result Variables
+^^^^^^^^^^^^^^^^
+
+This module defines the following variables:
+
+::
+
+  ZLIB_INCLUDE_DIRS   - where to find zlib.h, etc.
+  ZLIB_LIBRARIES      - List of libraries when using zlib.
+  ZLIB_FOUND          - True if zlib found.
+
+::
+
+  ZLIB_VERSION_STRING - The version of zlib found (x.y.z)
+  ZLIB_VERSION_MAJOR  - The major version of zlib
+  ZLIB_VERSION_MINOR  - The minor version of zlib
+  ZLIB_VERSION_PATCH  - The patch version of zlib
+  ZLIB_VERSION_TWEAK  - The tweak version of zlib
+
+Backward Compatibility
+^^^^^^^^^^^^^^^^^^^^^^
+
+The following variable are provided for backward compatibility
+
+::
+
+  ZLIB_MAJOR_VERSION  - The major version of zlib
+  ZLIB_MINOR_VERSION  - The minor version of zlib
+  ZLIB_PATCH_VERSION  - The patch version of zlib
+
+Hints
+^^^^^
+
+A user may set ``ZLIB_ROOT`` to a zlib installation root to tell this
+module where to look.
+#]=======================================================================]
 
 set(_ZLIB_SEARCHES)
 
diff --git a/Modules/Findosg.cmake b/Modules/Findosg.cmake
index 474ea82..bb28454 100644
--- a/Modules/Findosg.cmake
+++ b/Modules/Findosg.cmake
@@ -1,42 +1,43 @@
 # Distributed under the OSI-approved BSD 3-Clause License.  See accompanying
 # file Copyright.txt or https://cmake.org/licensing for details.
 
-#.rst:
-# Findosg
-# -------
-#
-#
-#
-#
-#
-# NOTE: It is highly recommended that you use the new
-# FindOpenSceneGraph.cmake introduced in CMake 2.6.3 and not use this
-# Find module directly.
-#
-# This is part of the Findosg* suite used to find OpenSceneGraph
-# components.  Each component is separate and you must opt in to each
-# module.  You must also opt into OpenGL and OpenThreads (and Producer
-# if needed) as these modules won't do it for you.  This is to allow you
-# control over your own system piece by piece in case you need to opt
-# out of certain components or change the Find behavior for a particular
-# module (perhaps because the default FindOpenGL.cmake module doesn't
-# work with your system as an example).  If you want to use a more
-# convenient module that includes everything, use the
-# FindOpenSceneGraph.cmake instead of the Findosg*.cmake modules.
-#
-# Locate osg This module defines
-#
-# OSG_FOUND - Was the Osg found? OSG_INCLUDE_DIR - Where to find the
-# headers OSG_LIBRARIES - The libraries to link against for the OSG (use
-# this)
-#
-# OSG_LIBRARY - The OSG library OSG_LIBRARY_DEBUG - The OSG debug
-# library
-#
-# $OSGDIR is an environment variable that would correspond to the
-# ./configure --prefix=$OSGDIR used in building osg.
-#
-# Created by Eric Wing.
+#[=======================================================================[.rst:
+Findosg
+-------
+
+
+
+
+
+NOTE: It is highly recommended that you use the new
+FindOpenSceneGraph.cmake introduced in CMake 2.6.3 and not use this
+Find module directly.
+
+This is part of the Findosg* suite used to find OpenSceneGraph
+components.  Each component is separate and you must opt in to each
+module.  You must also opt into OpenGL and OpenThreads (and Producer
+if needed) as these modules won't do it for you.  This is to allow you
+control over your own system piece by piece in case you need to opt
+out of certain components or change the Find behavior for a particular
+module (perhaps because the default FindOpenGL.cmake module doesn't
+work with your system as an example).  If you want to use a more
+convenient module that includes everything, use the
+FindOpenSceneGraph.cmake instead of the Findosg*.cmake modules.
+
+Locate osg This module defines
+
+OSG_FOUND - Was the Osg found? OSG_INCLUDE_DIR - Where to find the
+headers OSG_LIBRARIES - The libraries to link against for the OSG (use
+this)
+
+OSG_LIBRARY - The OSG library OSG_LIBRARY_DEBUG - The OSG debug
+library
+
+$OSGDIR is an environment variable that would correspond to the
+./configure --prefix=$OSGDIR used in building osg.
+
+Created by Eric Wing.
+#]=======================================================================]
 
 # Header files are presumed to be included like
 # #include <osg/PositionAttitudeTransform>
diff --git a/Modules/FindosgAnimation.cmake b/Modules/FindosgAnimation.cmake
index 5b26b64..65e3016 100644
--- a/Modules/FindosgAnimation.cmake
+++ b/Modules/FindosgAnimation.cmake
@@ -1,36 +1,37 @@
 # Distributed under the OSI-approved BSD 3-Clause License.  See accompanying
 # file Copyright.txt or https://cmake.org/licensing for details.
 
-#.rst:
-# FindosgAnimation
-# ----------------
-#
-#
-#
-# This is part of the Findosg* suite used to find OpenSceneGraph
-# components.  Each component is separate and you must opt in to each
-# module.  You must also opt into OpenGL and OpenThreads (and Producer
-# if needed) as these modules won't do it for you.  This is to allow you
-# control over your own system piece by piece in case you need to opt
-# out of certain components or change the Find behavior for a particular
-# module (perhaps because the default FindOpenGL.cmake module doesn't
-# work with your system as an example).  If you want to use a more
-# convenient module that includes everything, use the
-# FindOpenSceneGraph.cmake instead of the Findosg*.cmake modules.
-#
-# Locate osgAnimation This module defines
-#
-# OSGANIMATION_FOUND - Was osgAnimation found? OSGANIMATION_INCLUDE_DIR
-# - Where to find the headers OSGANIMATION_LIBRARIES - The libraries to
-# link against for the OSG (use this)
-#
-# OSGANIMATION_LIBRARY - The OSG library OSGANIMATION_LIBRARY_DEBUG -
-# The OSG debug library
-#
-# $OSGDIR is an environment variable that would correspond to the
-# ./configure --prefix=$OSGDIR used in building osg.
-#
-# Created by Eric Wing.
+#[=======================================================================[.rst:
+FindosgAnimation
+----------------
+
+
+
+This is part of the Findosg* suite used to find OpenSceneGraph
+components.  Each component is separate and you must opt in to each
+module.  You must also opt into OpenGL and OpenThreads (and Producer
+if needed) as these modules won't do it for you.  This is to allow you
+control over your own system piece by piece in case you need to opt
+out of certain components or change the Find behavior for a particular
+module (perhaps because the default FindOpenGL.cmake module doesn't
+work with your system as an example).  If you want to use a more
+convenient module that includes everything, use the
+FindOpenSceneGraph.cmake instead of the Findosg*.cmake modules.
+
+Locate osgAnimation This module defines
+
+OSGANIMATION_FOUND - Was osgAnimation found? OSGANIMATION_INCLUDE_DIR
+- Where to find the headers OSGANIMATION_LIBRARIES - The libraries to
+link against for the OSG (use this)
+
+OSGANIMATION_LIBRARY - The OSG library OSGANIMATION_LIBRARY_DEBUG -
+The OSG debug library
+
+$OSGDIR is an environment variable that would correspond to the
+./configure --prefix=$OSGDIR used in building osg.
+
+Created by Eric Wing.
+#]=======================================================================]
 
 # Header files are presumed to be included like
 # #include <osg/PositionAttitudeTransform>
diff --git a/Modules/FindosgDB.cmake b/Modules/FindosgDB.cmake
index 6ddf53c..d0789ba 100644
--- a/Modules/FindosgDB.cmake
+++ b/Modules/FindosgDB.cmake
@@ -1,36 +1,37 @@
 # Distributed under the OSI-approved BSD 3-Clause License.  See accompanying
 # file Copyright.txt or https://cmake.org/licensing for details.
 
-#.rst:
-# FindosgDB
-# ---------
-#
-#
-#
-# This is part of the Findosg* suite used to find OpenSceneGraph
-# components.  Each component is separate and you must opt in to each
-# module.  You must also opt into OpenGL and OpenThreads (and Producer
-# if needed) as these modules won't do it for you.  This is to allow you
-# control over your own system piece by piece in case you need to opt
-# out of certain components or change the Find behavior for a particular
-# module (perhaps because the default FindOpenGL.cmake module doesn't
-# work with your system as an example).  If you want to use a more
-# convenient module that includes everything, use the
-# FindOpenSceneGraph.cmake instead of the Findosg*.cmake modules.
-#
-# Locate osgDB This module defines
-#
-# OSGDB_FOUND - Was osgDB found? OSGDB_INCLUDE_DIR - Where to find the
-# headers OSGDB_LIBRARIES - The libraries to link against for the osgDB
-# (use this)
-#
-# OSGDB_LIBRARY - The osgDB library OSGDB_LIBRARY_DEBUG - The osgDB
-# debug library
-#
-# $OSGDIR is an environment variable that would correspond to the
-# ./configure --prefix=$OSGDIR used in building osg.
-#
-# Created by Eric Wing.
+#[=======================================================================[.rst:
+FindosgDB
+---------
+
+
+
+This is part of the Findosg* suite used to find OpenSceneGraph
+components.  Each component is separate and you must opt in to each
+module.  You must also opt into OpenGL and OpenThreads (and Producer
+if needed) as these modules won't do it for you.  This is to allow you
+control over your own system piece by piece in case you need to opt
+out of certain components or change the Find behavior for a particular
+module (perhaps because the default FindOpenGL.cmake module doesn't
+work with your system as an example).  If you want to use a more
+convenient module that includes everything, use the
+FindOpenSceneGraph.cmake instead of the Findosg*.cmake modules.
+
+Locate osgDB This module defines
+
+OSGDB_FOUND - Was osgDB found? OSGDB_INCLUDE_DIR - Where to find the
+headers OSGDB_LIBRARIES - The libraries to link against for the osgDB
+(use this)
+
+OSGDB_LIBRARY - The osgDB library OSGDB_LIBRARY_DEBUG - The osgDB
+debug library
+
+$OSGDIR is an environment variable that would correspond to the
+./configure --prefix=$OSGDIR used in building osg.
+
+Created by Eric Wing.
+#]=======================================================================]
 
 # Header files are presumed to be included like
 # #include <osg/PositionAttitudeTransform>
diff --git a/Modules/FindosgFX.cmake b/Modules/FindosgFX.cmake
index e4bc276..438fab7 100644
--- a/Modules/FindosgFX.cmake
+++ b/Modules/FindosgFX.cmake
@@ -1,36 +1,37 @@
 # Distributed under the OSI-approved BSD 3-Clause License.  See accompanying
 # file Copyright.txt or https://cmake.org/licensing for details.
 
-#.rst:
-# FindosgFX
-# ---------
-#
-#
-#
-# This is part of the Findosg* suite used to find OpenSceneGraph
-# components.  Each component is separate and you must opt in to each
-# module.  You must also opt into OpenGL and OpenThreads (and Producer
-# if needed) as these modules won't do it for you.  This is to allow you
-# control over your own system piece by piece in case you need to opt
-# out of certain components or change the Find behavior for a particular
-# module (perhaps because the default FindOpenGL.cmake module doesn't
-# work with your system as an example).  If you want to use a more
-# convenient module that includes everything, use the
-# FindOpenSceneGraph.cmake instead of the Findosg*.cmake modules.
-#
-# Locate osgFX This module defines
-#
-# OSGFX_FOUND - Was osgFX found? OSGFX_INCLUDE_DIR - Where to find the
-# headers OSGFX_LIBRARIES - The libraries to link against for the osgFX
-# (use this)
-#
-# OSGFX_LIBRARY - The osgFX library OSGFX_LIBRARY_DEBUG - The osgFX
-# debug library
-#
-# $OSGDIR is an environment variable that would correspond to the
-# ./configure --prefix=$OSGDIR used in building osg.
-#
-# Created by Eric Wing.
+#[=======================================================================[.rst:
+FindosgFX
+---------
+
+
+
+This is part of the Findosg* suite used to find OpenSceneGraph
+components.  Each component is separate and you must opt in to each
+module.  You must also opt into OpenGL and OpenThreads (and Producer
+if needed) as these modules won't do it for you.  This is to allow you
+control over your own system piece by piece in case you need to opt
+out of certain components or change the Find behavior for a particular
+module (perhaps because the default FindOpenGL.cmake module doesn't
+work with your system as an example).  If you want to use a more
+convenient module that includes everything, use the
+FindOpenSceneGraph.cmake instead of the Findosg*.cmake modules.
+
+Locate osgFX This module defines
+
+OSGFX_FOUND - Was osgFX found? OSGFX_INCLUDE_DIR - Where to find the
+headers OSGFX_LIBRARIES - The libraries to link against for the osgFX
+(use this)
+
+OSGFX_LIBRARY - The osgFX library OSGFX_LIBRARY_DEBUG - The osgFX
+debug library
+
+$OSGDIR is an environment variable that would correspond to the
+./configure --prefix=$OSGDIR used in building osg.
+
+Created by Eric Wing.
+#]=======================================================================]
 
 # Header files are presumed to be included like
 # #include <osg/PositionAttitudeTransform>
diff --git a/Modules/FindosgGA.cmake b/Modules/FindosgGA.cmake
index 97adeb7..7b6ef30 100644
--- a/Modules/FindosgGA.cmake
+++ b/Modules/FindosgGA.cmake
@@ -1,36 +1,37 @@
 # Distributed under the OSI-approved BSD 3-Clause License.  See accompanying
 # file Copyright.txt or https://cmake.org/licensing for details.
 
-#.rst:
-# FindosgGA
-# ---------
-#
-#
-#
-# This is part of the Findosg* suite used to find OpenSceneGraph
-# components.  Each component is separate and you must opt in to each
-# module.  You must also opt into OpenGL and OpenThreads (and Producer
-# if needed) as these modules won't do it for you.  This is to allow you
-# control over your own system piece by piece in case you need to opt
-# out of certain components or change the Find behavior for a particular
-# module (perhaps because the default FindOpenGL.cmake module doesn't
-# work with your system as an example).  If you want to use a more
-# convenient module that includes everything, use the
-# FindOpenSceneGraph.cmake instead of the Findosg*.cmake modules.
-#
-# Locate osgGA This module defines
-#
-# OSGGA_FOUND - Was osgGA found? OSGGA_INCLUDE_DIR - Where to find the
-# headers OSGGA_LIBRARIES - The libraries to link against for the osgGA
-# (use this)
-#
-# OSGGA_LIBRARY - The osgGA library OSGGA_LIBRARY_DEBUG - The osgGA
-# debug library
-#
-# $OSGDIR is an environment variable that would correspond to the
-# ./configure --prefix=$OSGDIR used in building osg.
-#
-# Created by Eric Wing.
+#[=======================================================================[.rst:
+FindosgGA
+---------
+
+
+
+This is part of the Findosg* suite used to find OpenSceneGraph
+components.  Each component is separate and you must opt in to each
+module.  You must also opt into OpenGL and OpenThreads (and Producer
+if needed) as these modules won't do it for you.  This is to allow you
+control over your own system piece by piece in case you need to opt
+out of certain components or change the Find behavior for a particular
+module (perhaps because the default FindOpenGL.cmake module doesn't
+work with your system as an example).  If you want to use a more
+convenient module that includes everything, use the
+FindOpenSceneGraph.cmake instead of the Findosg*.cmake modules.
+
+Locate osgGA This module defines
+
+OSGGA_FOUND - Was osgGA found? OSGGA_INCLUDE_DIR - Where to find the
+headers OSGGA_LIBRARIES - The libraries to link against for the osgGA
+(use this)
+
+OSGGA_LIBRARY - The osgGA library OSGGA_LIBRARY_DEBUG - The osgGA
+debug library
+
+$OSGDIR is an environment variable that would correspond to the
+./configure --prefix=$OSGDIR used in building osg.
+
+Created by Eric Wing.
+#]=======================================================================]
 
 # Header files are presumed to be included like
 # #include <osg/PositionAttitudeTransform>
diff --git a/Modules/FindosgIntrospection.cmake b/Modules/FindosgIntrospection.cmake
index e735942..625e4c2 100644
--- a/Modules/FindosgIntrospection.cmake
+++ b/Modules/FindosgIntrospection.cmake
@@ -1,37 +1,38 @@
 # Distributed under the OSI-approved BSD 3-Clause License.  See accompanying
 # file Copyright.txt or https://cmake.org/licensing for details.
 
-#.rst:
-# FindosgIntrospection
-# --------------------
-#
-#
-#
-# This is part of the Findosg* suite used to find OpenSceneGraph
-# components.  Each component is separate and you must opt in to each
-# module.  You must also opt into OpenGL and OpenThreads (and Producer
-# if needed) as these modules won't do it for you.  This is to allow you
-# control over your own system piece by piece in case you need to opt
-# out of certain components or change the Find behavior for a particular
-# module (perhaps because the default FindOpenGL.cmake module doesn't
-# work with your system as an example).  If you want to use a more
-# convenient module that includes everything, use the
-# FindOpenSceneGraph.cmake instead of the Findosg*.cmake modules.
-#
-# Locate osgINTROSPECTION This module defines
-#
-# OSGINTROSPECTION_FOUND - Was osgIntrospection found?
-# OSGINTROSPECTION_INCLUDE_DIR - Where to find the headers
-# OSGINTROSPECTION_LIBRARIES - The libraries to link for
-# osgIntrospection (use this)
-#
-# OSGINTROSPECTION_LIBRARY - The osgIntrospection library
-# OSGINTROSPECTION_LIBRARY_DEBUG - The osgIntrospection debug library
-#
-# $OSGDIR is an environment variable that would correspond to the
-# ./configure --prefix=$OSGDIR used in building osg.
-#
-# Created by Eric Wing.
+#[=======================================================================[.rst:
+FindosgIntrospection
+--------------------
+
+
+
+This is part of the Findosg* suite used to find OpenSceneGraph
+components.  Each component is separate and you must opt in to each
+module.  You must also opt into OpenGL and OpenThreads (and Producer
+if needed) as these modules won't do it for you.  This is to allow you
+control over your own system piece by piece in case you need to opt
+out of certain components or change the Find behavior for a particular
+module (perhaps because the default FindOpenGL.cmake module doesn't
+work with your system as an example).  If you want to use a more
+convenient module that includes everything, use the
+FindOpenSceneGraph.cmake instead of the Findosg*.cmake modules.
+
+Locate osgINTROSPECTION This module defines
+
+OSGINTROSPECTION_FOUND - Was osgIntrospection found?
+OSGINTROSPECTION_INCLUDE_DIR - Where to find the headers
+OSGINTROSPECTION_LIBRARIES - The libraries to link for
+osgIntrospection (use this)
+
+OSGINTROSPECTION_LIBRARY - The osgIntrospection library
+OSGINTROSPECTION_LIBRARY_DEBUG - The osgIntrospection debug library
+
+$OSGDIR is an environment variable that would correspond to the
+./configure --prefix=$OSGDIR used in building osg.
+
+Created by Eric Wing.
+#]=======================================================================]
 
 # Header files are presumed to be included like
 # #include <osg/PositionAttitudeTransform>
diff --git a/Modules/FindosgManipulator.cmake b/Modules/FindosgManipulator.cmake
index b88f1a4..857ff5d 100644
--- a/Modules/FindosgManipulator.cmake
+++ b/Modules/FindosgManipulator.cmake
@@ -1,37 +1,38 @@
 # Distributed under the OSI-approved BSD 3-Clause License.  See accompanying
 # file Copyright.txt or https://cmake.org/licensing for details.
 
-#.rst:
-# FindosgManipulator
-# ------------------
-#
-#
-#
-# This is part of the Findosg* suite used to find OpenSceneGraph
-# components.  Each component is separate and you must opt in to each
-# module.  You must also opt into OpenGL and OpenThreads (and Producer
-# if needed) as these modules won't do it for you.  This is to allow you
-# control over your own system piece by piece in case you need to opt
-# out of certain components or change the Find behavior for a particular
-# module (perhaps because the default FindOpenGL.cmake module doesn't
-# work with your system as an example).  If you want to use a more
-# convenient module that includes everything, use the
-# FindOpenSceneGraph.cmake instead of the Findosg*.cmake modules.
-#
-# Locate osgManipulator This module defines
-#
-# OSGMANIPULATOR_FOUND - Was osgManipulator found?
-# OSGMANIPULATOR_INCLUDE_DIR - Where to find the headers
-# OSGMANIPULATOR_LIBRARIES - The libraries to link for osgManipulator
-# (use this)
-#
-# OSGMANIPULATOR_LIBRARY - The osgManipulator library
-# OSGMANIPULATOR_LIBRARY_DEBUG - The osgManipulator debug library
-#
-# $OSGDIR is an environment variable that would correspond to the
-# ./configure --prefix=$OSGDIR used in building osg.
-#
-# Created by Eric Wing.
+#[=======================================================================[.rst:
+FindosgManipulator
+------------------
+
+
+
+This is part of the Findosg* suite used to find OpenSceneGraph
+components.  Each component is separate and you must opt in to each
+module.  You must also opt into OpenGL and OpenThreads (and Producer
+if needed) as these modules won't do it for you.  This is to allow you
+control over your own system piece by piece in case you need to opt
+out of certain components or change the Find behavior for a particular
+module (perhaps because the default FindOpenGL.cmake module doesn't
+work with your system as an example).  If you want to use a more
+convenient module that includes everything, use the
+FindOpenSceneGraph.cmake instead of the Findosg*.cmake modules.
+
+Locate osgManipulator This module defines
+
+OSGMANIPULATOR_FOUND - Was osgManipulator found?
+OSGMANIPULATOR_INCLUDE_DIR - Where to find the headers
+OSGMANIPULATOR_LIBRARIES - The libraries to link for osgManipulator
+(use this)
+
+OSGMANIPULATOR_LIBRARY - The osgManipulator library
+OSGMANIPULATOR_LIBRARY_DEBUG - The osgManipulator debug library
+
+$OSGDIR is an environment variable that would correspond to the
+./configure --prefix=$OSGDIR used in building osg.
+
+Created by Eric Wing.
+#]=======================================================================]
 
 # Header files are presumed to be included like
 # #include <osg/PositionAttitudeTransform>
diff --git a/Modules/FindosgParticle.cmake b/Modules/FindosgParticle.cmake
index 059746a..91a30dc 100644
--- a/Modules/FindosgParticle.cmake
+++ b/Modules/FindosgParticle.cmake
@@ -1,36 +1,37 @@
 # Distributed under the OSI-approved BSD 3-Clause License.  See accompanying
 # file Copyright.txt or https://cmake.org/licensing for details.
 
-#.rst:
-# FindosgParticle
-# ---------------
-#
-#
-#
-# This is part of the Findosg* suite used to find OpenSceneGraph
-# components.  Each component is separate and you must opt in to each
-# module.  You must also opt into OpenGL and OpenThreads (and Producer
-# if needed) as these modules won't do it for you.  This is to allow you
-# control over your own system piece by piece in case you need to opt
-# out of certain components or change the Find behavior for a particular
-# module (perhaps because the default FindOpenGL.cmake module doesn't
-# work with your system as an example).  If you want to use a more
-# convenient module that includes everything, use the
-# FindOpenSceneGraph.cmake instead of the Findosg*.cmake modules.
-#
-# Locate osgParticle This module defines
-#
-# OSGPARTICLE_FOUND - Was osgParticle found? OSGPARTICLE_INCLUDE_DIR -
-# Where to find the headers OSGPARTICLE_LIBRARIES - The libraries to
-# link for osgParticle (use this)
-#
-# OSGPARTICLE_LIBRARY - The osgParticle library
-# OSGPARTICLE_LIBRARY_DEBUG - The osgParticle debug library
-#
-# $OSGDIR is an environment variable that would correspond to the
-# ./configure --prefix=$OSGDIR used in building osg.
-#
-# Created by Eric Wing.
+#[=======================================================================[.rst:
+FindosgParticle
+---------------
+
+
+
+This is part of the Findosg* suite used to find OpenSceneGraph
+components.  Each component is separate and you must opt in to each
+module.  You must also opt into OpenGL and OpenThreads (and Producer
+if needed) as these modules won't do it for you.  This is to allow you
+control over your own system piece by piece in case you need to opt
+out of certain components or change the Find behavior for a particular
+module (perhaps because the default FindOpenGL.cmake module doesn't
+work with your system as an example).  If you want to use a more
+convenient module that includes everything, use the
+FindOpenSceneGraph.cmake instead of the Findosg*.cmake modules.
+
+Locate osgParticle This module defines
+
+OSGPARTICLE_FOUND - Was osgParticle found? OSGPARTICLE_INCLUDE_DIR -
+Where to find the headers OSGPARTICLE_LIBRARIES - The libraries to
+link for osgParticle (use this)
+
+OSGPARTICLE_LIBRARY - The osgParticle library
+OSGPARTICLE_LIBRARY_DEBUG - The osgParticle debug library
+
+$OSGDIR is an environment variable that would correspond to the
+./configure --prefix=$OSGDIR used in building osg.
+
+Created by Eric Wing.
+#]=======================================================================]
 
 # Header files are presumed to be included like
 # #include <osg/PositionAttitudeTransform>
diff --git a/Modules/FindosgPresentation.cmake b/Modules/FindosgPresentation.cmake
index 84a4105..eae75d6 100644
--- a/Modules/FindosgPresentation.cmake
+++ b/Modules/FindosgPresentation.cmake
@@ -1,38 +1,39 @@
 # Distributed under the OSI-approved BSD 3-Clause License.  See accompanying
 # file Copyright.txt or https://cmake.org/licensing for details.
 
-#.rst:
-# FindosgPresentation
-# -------------------
-#
-#
-#
-# This is part of the Findosg* suite used to find OpenSceneGraph
-# components.  Each component is separate and you must opt in to each
-# module.  You must also opt into OpenGL and OpenThreads (and Producer
-# if needed) as these modules won't do it for you.  This is to allow you
-# control over your own system piece by piece in case you need to opt
-# out of certain components or change the Find behavior for a particular
-# module (perhaps because the default FindOpenGL.cmake module doesn't
-# work with your system as an example).  If you want to use a more
-# convenient module that includes everything, use the
-# FindOpenSceneGraph.cmake instead of the Findosg*.cmake modules.
-#
-# Locate osgPresentation This module defines
-#
-# OSGPRESENTATION_FOUND - Was osgPresentation found?
-# OSGPRESENTATION_INCLUDE_DIR - Where to find the headers
-# OSGPRESENTATION_LIBRARIES - The libraries to link for osgPresentation
-# (use this)
-#
-# OSGPRESENTATION_LIBRARY - The osgPresentation library
-# OSGPRESENTATION_LIBRARY_DEBUG - The osgPresentation debug library
-#
-# $OSGDIR is an environment variable that would correspond to the
-# ./configure --prefix=$OSGDIR used in building osg.
-#
-# Created by Eric Wing.  Modified to work with osgPresentation by Robert
-# Osfield, January 2012.
+#[=======================================================================[.rst:
+FindosgPresentation
+-------------------
+
+
+
+This is part of the Findosg* suite used to find OpenSceneGraph
+components.  Each component is separate and you must opt in to each
+module.  You must also opt into OpenGL and OpenThreads (and Producer
+if needed) as these modules won't do it for you.  This is to allow you
+control over your own system piece by piece in case you need to opt
+out of certain components or change the Find behavior for a particular
+module (perhaps because the default FindOpenGL.cmake module doesn't
+work with your system as an example).  If you want to use a more
+convenient module that includes everything, use the
+FindOpenSceneGraph.cmake instead of the Findosg*.cmake modules.
+
+Locate osgPresentation This module defines
+
+OSGPRESENTATION_FOUND - Was osgPresentation found?
+OSGPRESENTATION_INCLUDE_DIR - Where to find the headers
+OSGPRESENTATION_LIBRARIES - The libraries to link for osgPresentation
+(use this)
+
+OSGPRESENTATION_LIBRARY - The osgPresentation library
+OSGPRESENTATION_LIBRARY_DEBUG - The osgPresentation debug library
+
+$OSGDIR is an environment variable that would correspond to the
+./configure --prefix=$OSGDIR used in building osg.
+
+Created by Eric Wing.  Modified to work with osgPresentation by Robert
+Osfield, January 2012.
+#]=======================================================================]
 
 # Header files are presumed to be included like
 # #include <osg/PositionAttitudeTransform>
diff --git a/Modules/FindosgProducer.cmake b/Modules/FindosgProducer.cmake
index e5700bf..33b9f73 100644
--- a/Modules/FindosgProducer.cmake
+++ b/Modules/FindosgProducer.cmake
@@ -1,36 +1,37 @@
 # Distributed under the OSI-approved BSD 3-Clause License.  See accompanying
 # file Copyright.txt or https://cmake.org/licensing for details.
 
-#.rst:
-# FindosgProducer
-# ---------------
-#
-#
-#
-# This is part of the Findosg* suite used to find OpenSceneGraph
-# components.  Each component is separate and you must opt in to each
-# module.  You must also opt into OpenGL and OpenThreads (and Producer
-# if needed) as these modules won't do it for you.  This is to allow you
-# control over your own system piece by piece in case you need to opt
-# out of certain components or change the Find behavior for a particular
-# module (perhaps because the default FindOpenGL.cmake module doesn't
-# work with your system as an example).  If you want to use a more
-# convenient module that includes everything, use the
-# FindOpenSceneGraph.cmake instead of the Findosg*.cmake modules.
-#
-# Locate osgProducer This module defines
-#
-# OSGPRODUCER_FOUND - Was osgProducer found? OSGPRODUCER_INCLUDE_DIR -
-# Where to find the headers OSGPRODUCER_LIBRARIES - The libraries to
-# link for osgProducer (use this)
-#
-# OSGPRODUCER_LIBRARY - The osgProducer library
-# OSGPRODUCER_LIBRARY_DEBUG - The osgProducer debug library
-#
-# $OSGDIR is an environment variable that would correspond to the
-# ./configure --prefix=$OSGDIR used in building osg.
-#
-# Created by Eric Wing.
+#[=======================================================================[.rst:
+FindosgProducer
+---------------
+
+
+
+This is part of the Findosg* suite used to find OpenSceneGraph
+components.  Each component is separate and you must opt in to each
+module.  You must also opt into OpenGL and OpenThreads (and Producer
+if needed) as these modules won't do it for you.  This is to allow you
+control over your own system piece by piece in case you need to opt
+out of certain components or change the Find behavior for a particular
+module (perhaps because the default FindOpenGL.cmake module doesn't
+work with your system as an example).  If you want to use a more
+convenient module that includes everything, use the
+FindOpenSceneGraph.cmake instead of the Findosg*.cmake modules.
+
+Locate osgProducer This module defines
+
+OSGPRODUCER_FOUND - Was osgProducer found? OSGPRODUCER_INCLUDE_DIR -
+Where to find the headers OSGPRODUCER_LIBRARIES - The libraries to
+link for osgProducer (use this)
+
+OSGPRODUCER_LIBRARY - The osgProducer library
+OSGPRODUCER_LIBRARY_DEBUG - The osgProducer debug library
+
+$OSGDIR is an environment variable that would correspond to the
+./configure --prefix=$OSGDIR used in building osg.
+
+Created by Eric Wing.
+#]=======================================================================]
 
 # Header files are presumed to be included like
 # #include <osg/PositionAttitudeTransform>
diff --git a/Modules/FindosgQt.cmake b/Modules/FindosgQt.cmake
index 04a2393..cf35630 100644
--- a/Modules/FindosgQt.cmake
+++ b/Modules/FindosgQt.cmake
@@ -1,36 +1,37 @@
 # Distributed under the OSI-approved BSD 3-Clause License.  See accompanying
 # file Copyright.txt or https://cmake.org/licensing for details.
 
-#.rst:
-# FindosgQt
-# ---------
-#
-#
-#
-# This is part of the Findosg* suite used to find OpenSceneGraph
-# components.  Each component is separate and you must opt in to each
-# module.  You must also opt into OpenGL and OpenThreads (and Producer
-# if needed) as these modules won't do it for you.  This is to allow you
-# control over your own system piece by piece in case you need to opt
-# out of certain components or change the Find behavior for a particular
-# module (perhaps because the default FindOpenGL.cmake module doesn't
-# work with your system as an example).  If you want to use a more
-# convenient module that includes everything, use the
-# FindOpenSceneGraph.cmake instead of the Findosg*.cmake modules.
-#
-# Locate osgQt This module defines
-#
-# OSGQT_FOUND - Was osgQt found? OSGQT_INCLUDE_DIR - Where to find the
-# headers OSGQT_LIBRARIES - The libraries to link for osgQt (use this)
-#
-# OSGQT_LIBRARY - The osgQt library OSGQT_LIBRARY_DEBUG - The osgQt
-# debug library
-#
-# $OSGDIR is an environment variable that would correspond to the
-# ./configure --prefix=$OSGDIR used in building osg.
-#
-# Created by Eric Wing.  Modified to work with osgQt by Robert Osfield,
-# January 2012.
+#[=======================================================================[.rst:
+FindosgQt
+---------
+
+
+
+This is part of the Findosg* suite used to find OpenSceneGraph
+components.  Each component is separate and you must opt in to each
+module.  You must also opt into OpenGL and OpenThreads (and Producer
+if needed) as these modules won't do it for you.  This is to allow you
+control over your own system piece by piece in case you need to opt
+out of certain components or change the Find behavior for a particular
+module (perhaps because the default FindOpenGL.cmake module doesn't
+work with your system as an example).  If you want to use a more
+convenient module that includes everything, use the
+FindOpenSceneGraph.cmake instead of the Findosg*.cmake modules.
+
+Locate osgQt This module defines
+
+OSGQT_FOUND - Was osgQt found? OSGQT_INCLUDE_DIR - Where to find the
+headers OSGQT_LIBRARIES - The libraries to link for osgQt (use this)
+
+OSGQT_LIBRARY - The osgQt library OSGQT_LIBRARY_DEBUG - The osgQt
+debug library
+
+$OSGDIR is an environment variable that would correspond to the
+./configure --prefix=$OSGDIR used in building osg.
+
+Created by Eric Wing.  Modified to work with osgQt by Robert Osfield,
+January 2012.
+#]=======================================================================]
 
 # Header files are presumed to be included like
 # #include <osg/PositionAttitudeTransform>
diff --git a/Modules/FindosgShadow.cmake b/Modules/FindosgShadow.cmake
index 0a7ba23..0049c4e 100644
--- a/Modules/FindosgShadow.cmake
+++ b/Modules/FindosgShadow.cmake
@@ -1,36 +1,37 @@
 # Distributed under the OSI-approved BSD 3-Clause License.  See accompanying
 # file Copyright.txt or https://cmake.org/licensing for details.
 
-#.rst:
-# FindosgShadow
-# -------------
-#
-#
-#
-# This is part of the Findosg* suite used to find OpenSceneGraph
-# components.  Each component is separate and you must opt in to each
-# module.  You must also opt into OpenGL and OpenThreads (and Producer
-# if needed) as these modules won't do it for you.  This is to allow you
-# control over your own system piece by piece in case you need to opt
-# out of certain components or change the Find behavior for a particular
-# module (perhaps because the default FindOpenGL.cmake module doesn't
-# work with your system as an example).  If you want to use a more
-# convenient module that includes everything, use the
-# FindOpenSceneGraph.cmake instead of the Findosg*.cmake modules.
-#
-# Locate osgShadow This module defines
-#
-# OSGSHADOW_FOUND - Was osgShadow found? OSGSHADOW_INCLUDE_DIR - Where
-# to find the headers OSGSHADOW_LIBRARIES - The libraries to link for
-# osgShadow (use this)
-#
-# OSGSHADOW_LIBRARY - The osgShadow library OSGSHADOW_LIBRARY_DEBUG -
-# The osgShadow debug library
-#
-# $OSGDIR is an environment variable that would correspond to the
-# ./configure --prefix=$OSGDIR used in building osg.
-#
-# Created by Eric Wing.
+#[=======================================================================[.rst:
+FindosgShadow
+-------------
+
+
+
+This is part of the Findosg* suite used to find OpenSceneGraph
+components.  Each component is separate and you must opt in to each
+module.  You must also opt into OpenGL and OpenThreads (and Producer
+if needed) as these modules won't do it for you.  This is to allow you
+control over your own system piece by piece in case you need to opt
+out of certain components or change the Find behavior for a particular
+module (perhaps because the default FindOpenGL.cmake module doesn't
+work with your system as an example).  If you want to use a more
+convenient module that includes everything, use the
+FindOpenSceneGraph.cmake instead of the Findosg*.cmake modules.
+
+Locate osgShadow This module defines
+
+OSGSHADOW_FOUND - Was osgShadow found? OSGSHADOW_INCLUDE_DIR - Where
+to find the headers OSGSHADOW_LIBRARIES - The libraries to link for
+osgShadow (use this)
+
+OSGSHADOW_LIBRARY - The osgShadow library OSGSHADOW_LIBRARY_DEBUG -
+The osgShadow debug library
+
+$OSGDIR is an environment variable that would correspond to the
+./configure --prefix=$OSGDIR used in building osg.
+
+Created by Eric Wing.
+#]=======================================================================]
 
 # Header files are presumed to be included like
 # #include <osg/PositionAttitudeTransform>
diff --git a/Modules/FindosgSim.cmake b/Modules/FindosgSim.cmake
index 15426a2..43ba542 100644
--- a/Modules/FindosgSim.cmake
+++ b/Modules/FindosgSim.cmake
@@ -1,36 +1,37 @@
 # Distributed under the OSI-approved BSD 3-Clause License.  See accompanying
 # file Copyright.txt or https://cmake.org/licensing for details.
 
-#.rst:
-# FindosgSim
-# ----------
-#
-#
-#
-# This is part of the Findosg* suite used to find OpenSceneGraph
-# components.  Each component is separate and you must opt in to each
-# module.  You must also opt into OpenGL and OpenThreads (and Producer
-# if needed) as these modules won't do it for you.  This is to allow you
-# control over your own system piece by piece in case you need to opt
-# out of certain components or change the Find behavior for a particular
-# module (perhaps because the default FindOpenGL.cmake module doesn't
-# work with your system as an example).  If you want to use a more
-# convenient module that includes everything, use the
-# FindOpenSceneGraph.cmake instead of the Findosg*.cmake modules.
-#
-# Locate osgSim This module defines
-#
-# OSGSIM_FOUND - Was osgSim found? OSGSIM_INCLUDE_DIR - Where to find
-# the headers OSGSIM_LIBRARIES - The libraries to link for osgSim (use
-# this)
-#
-# OSGSIM_LIBRARY - The osgSim library OSGSIM_LIBRARY_DEBUG - The osgSim
-# debug library
-#
-# $OSGDIR is an environment variable that would correspond to the
-# ./configure --prefix=$OSGDIR used in building osg.
-#
-# Created by Eric Wing.
+#[=======================================================================[.rst:
+FindosgSim
+----------
+
+
+
+This is part of the Findosg* suite used to find OpenSceneGraph
+components.  Each component is separate and you must opt in to each
+module.  You must also opt into OpenGL and OpenThreads (and Producer
+if needed) as these modules won't do it for you.  This is to allow you
+control over your own system piece by piece in case you need to opt
+out of certain components or change the Find behavior for a particular
+module (perhaps because the default FindOpenGL.cmake module doesn't
+work with your system as an example).  If you want to use a more
+convenient module that includes everything, use the
+FindOpenSceneGraph.cmake instead of the Findosg*.cmake modules.
+
+Locate osgSim This module defines
+
+OSGSIM_FOUND - Was osgSim found? OSGSIM_INCLUDE_DIR - Where to find
+the headers OSGSIM_LIBRARIES - The libraries to link for osgSim (use
+this)
+
+OSGSIM_LIBRARY - The osgSim library OSGSIM_LIBRARY_DEBUG - The osgSim
+debug library
+
+$OSGDIR is an environment variable that would correspond to the
+./configure --prefix=$OSGDIR used in building osg.
+
+Created by Eric Wing.
+#]=======================================================================]
 
 # Header files are presumed to be included like
 # #include <osg/PositionAttitudeTransform>
diff --git a/Modules/FindosgTerrain.cmake b/Modules/FindosgTerrain.cmake
index 04eae14..c6f5b69 100644
--- a/Modules/FindosgTerrain.cmake
+++ b/Modules/FindosgTerrain.cmake
@@ -1,36 +1,37 @@
 # Distributed under the OSI-approved BSD 3-Clause License.  See accompanying
 # file Copyright.txt or https://cmake.org/licensing for details.
 
-#.rst:
-# FindosgTerrain
-# --------------
-#
-#
-#
-# This is part of the Findosg* suite used to find OpenSceneGraph
-# components.  Each component is separate and you must opt in to each
-# module.  You must also opt into OpenGL and OpenThreads (and Producer
-# if needed) as these modules won't do it for you.  This is to allow you
-# control over your own system piece by piece in case you need to opt
-# out of certain components or change the Find behavior for a particular
-# module (perhaps because the default FindOpenGL.cmake module doesn't
-# work with your system as an example).  If you want to use a more
-# convenient module that includes everything, use the
-# FindOpenSceneGraph.cmake instead of the Findosg*.cmake modules.
-#
-# Locate osgTerrain This module defines
-#
-# OSGTERRAIN_FOUND - Was osgTerrain found? OSGTERRAIN_INCLUDE_DIR -
-# Where to find the headers OSGTERRAIN_LIBRARIES - The libraries to link
-# for osgTerrain (use this)
-#
-# OSGTERRAIN_LIBRARY - The osgTerrain library OSGTERRAIN_LIBRARY_DEBUG -
-# The osgTerrain debug library
-#
-# $OSGDIR is an environment variable that would correspond to the
-# ./configure --prefix=$OSGDIR used in building osg.
-#
-# Created by Eric Wing.
+#[=======================================================================[.rst:
+FindosgTerrain
+--------------
+
+
+
+This is part of the Findosg* suite used to find OpenSceneGraph
+components.  Each component is separate and you must opt in to each
+module.  You must also opt into OpenGL and OpenThreads (and Producer
+if needed) as these modules won't do it for you.  This is to allow you
+control over your own system piece by piece in case you need to opt
+out of certain components or change the Find behavior for a particular
+module (perhaps because the default FindOpenGL.cmake module doesn't
+work with your system as an example).  If you want to use a more
+convenient module that includes everything, use the
+FindOpenSceneGraph.cmake instead of the Findosg*.cmake modules.
+
+Locate osgTerrain This module defines
+
+OSGTERRAIN_FOUND - Was osgTerrain found? OSGTERRAIN_INCLUDE_DIR -
+Where to find the headers OSGTERRAIN_LIBRARIES - The libraries to link
+for osgTerrain (use this)
+
+OSGTERRAIN_LIBRARY - The osgTerrain library OSGTERRAIN_LIBRARY_DEBUG -
+The osgTerrain debug library
+
+$OSGDIR is an environment variable that would correspond to the
+./configure --prefix=$OSGDIR used in building osg.
+
+Created by Eric Wing.
+#]=======================================================================]
 
 # Header files are presumed to be included like
 # #include <osg/PositionAttitudeTransform>
diff --git a/Modules/FindosgText.cmake b/Modules/FindosgText.cmake
index 1e2d9fd..fd3c232 100644
--- a/Modules/FindosgText.cmake
+++ b/Modules/FindosgText.cmake
@@ -1,36 +1,37 @@
 # Distributed under the OSI-approved BSD 3-Clause License.  See accompanying
 # file Copyright.txt or https://cmake.org/licensing for details.
 
-#.rst:
-# FindosgText
-# -----------
-#
-#
-#
-# This is part of the Findosg* suite used to find OpenSceneGraph
-# components.  Each component is separate and you must opt in to each
-# module.  You must also opt into OpenGL and OpenThreads (and Producer
-# if needed) as these modules won't do it for you.  This is to allow you
-# control over your own system piece by piece in case you need to opt
-# out of certain components or change the Find behavior for a particular
-# module (perhaps because the default FindOpenGL.cmake module doesn't
-# work with your system as an example).  If you want to use a more
-# convenient module that includes everything, use the
-# FindOpenSceneGraph.cmake instead of the Findosg*.cmake modules.
-#
-# Locate osgText This module defines
-#
-# OSGTEXT_FOUND - Was osgText found? OSGTEXT_INCLUDE_DIR - Where to find
-# the headers OSGTEXT_LIBRARIES - The libraries to link for osgText (use
-# this)
-#
-# OSGTEXT_LIBRARY - The osgText library OSGTEXT_LIBRARY_DEBUG - The
-# osgText debug library
-#
-# $OSGDIR is an environment variable that would correspond to the
-# ./configure --prefix=$OSGDIR used in building osg.
-#
-# Created by Eric Wing.
+#[=======================================================================[.rst:
+FindosgText
+-----------
+
+
+
+This is part of the Findosg* suite used to find OpenSceneGraph
+components.  Each component is separate and you must opt in to each
+module.  You must also opt into OpenGL and OpenThreads (and Producer
+if needed) as these modules won't do it for you.  This is to allow you
+control over your own system piece by piece in case you need to opt
+out of certain components or change the Find behavior for a particular
+module (perhaps because the default FindOpenGL.cmake module doesn't
+work with your system as an example).  If you want to use a more
+convenient module that includes everything, use the
+FindOpenSceneGraph.cmake instead of the Findosg*.cmake modules.
+
+Locate osgText This module defines
+
+OSGTEXT_FOUND - Was osgText found? OSGTEXT_INCLUDE_DIR - Where to find
+the headers OSGTEXT_LIBRARIES - The libraries to link for osgText (use
+this)
+
+OSGTEXT_LIBRARY - The osgText library OSGTEXT_LIBRARY_DEBUG - The
+osgText debug library
+
+$OSGDIR is an environment variable that would correspond to the
+./configure --prefix=$OSGDIR used in building osg.
+
+Created by Eric Wing.
+#]=======================================================================]
 
 # Header files are presumed to be included like
 # #include <osg/PositionAttitudeTransform>
diff --git a/Modules/FindosgUtil.cmake b/Modules/FindosgUtil.cmake
index 13e0b80..e84727a 100644
--- a/Modules/FindosgUtil.cmake
+++ b/Modules/FindosgUtil.cmake
@@ -1,36 +1,37 @@
 # Distributed under the OSI-approved BSD 3-Clause License.  See accompanying
 # file Copyright.txt or https://cmake.org/licensing for details.
 
-#.rst:
-# FindosgUtil
-# -----------
-#
-#
-#
-# This is part of the Findosg* suite used to find OpenSceneGraph
-# components.  Each component is separate and you must opt in to each
-# module.  You must also opt into OpenGL and OpenThreads (and Producer
-# if needed) as these modules won't do it for you.  This is to allow you
-# control over your own system piece by piece in case you need to opt
-# out of certain components or change the Find behavior for a particular
-# module (perhaps because the default FindOpenGL.cmake module doesn't
-# work with your system as an example).  If you want to use a more
-# convenient module that includes everything, use the
-# FindOpenSceneGraph.cmake instead of the Findosg*.cmake modules.
-#
-# Locate osgUtil This module defines
-#
-# OSGUTIL_FOUND - Was osgUtil found? OSGUTIL_INCLUDE_DIR - Where to find
-# the headers OSGUTIL_LIBRARIES - The libraries to link for osgUtil (use
-# this)
-#
-# OSGUTIL_LIBRARY - The osgUtil library OSGUTIL_LIBRARY_DEBUG - The
-# osgUtil debug library
-#
-# $OSGDIR is an environment variable that would correspond to the
-# ./configure --prefix=$OSGDIR used in building osg.
-#
-# Created by Eric Wing.
+#[=======================================================================[.rst:
+FindosgUtil
+-----------
+
+
+
+This is part of the Findosg* suite used to find OpenSceneGraph
+components.  Each component is separate and you must opt in to each
+module.  You must also opt into OpenGL and OpenThreads (and Producer
+if needed) as these modules won't do it for you.  This is to allow you
+control over your own system piece by piece in case you need to opt
+out of certain components or change the Find behavior for a particular
+module (perhaps because the default FindOpenGL.cmake module doesn't
+work with your system as an example).  If you want to use a more
+convenient module that includes everything, use the
+FindOpenSceneGraph.cmake instead of the Findosg*.cmake modules.
+
+Locate osgUtil This module defines
+
+OSGUTIL_FOUND - Was osgUtil found? OSGUTIL_INCLUDE_DIR - Where to find
+the headers OSGUTIL_LIBRARIES - The libraries to link for osgUtil (use
+this)
+
+OSGUTIL_LIBRARY - The osgUtil library OSGUTIL_LIBRARY_DEBUG - The
+osgUtil debug library
+
+$OSGDIR is an environment variable that would correspond to the
+./configure --prefix=$OSGDIR used in building osg.
+
+Created by Eric Wing.
+#]=======================================================================]
 
 # Header files are presumed to be included like
 # #include <osg/PositionAttitudeTransform>
diff --git a/Modules/FindosgViewer.cmake b/Modules/FindosgViewer.cmake
index a91c49c..2174357 100644
--- a/Modules/FindosgViewer.cmake
+++ b/Modules/FindosgViewer.cmake
@@ -1,36 +1,37 @@
 # Distributed under the OSI-approved BSD 3-Clause License.  See accompanying
 # file Copyright.txt or https://cmake.org/licensing for details.
 
-#.rst:
-# FindosgViewer
-# -------------
-#
-#
-#
-# This is part of the Findosg* suite used to find OpenSceneGraph
-# components.  Each component is separate and you must opt in to each
-# module.  You must also opt into OpenGL and OpenThreads (and Producer
-# if needed) as these modules won't do it for you.  This is to allow you
-# control over your own system piece by piece in case you need to opt
-# out of certain components or change the Find behavior for a particular
-# module (perhaps because the default FindOpenGL.cmake module doesn't
-# work with your system as an example).  If you want to use a more
-# convenient module that includes everything, use the
-# FindOpenSceneGraph.cmake instead of the Findosg*.cmake modules.
-#
-# Locate osgViewer This module defines
-#
-# OSGVIEWER_FOUND - Was osgViewer found? OSGVIEWER_INCLUDE_DIR - Where
-# to find the headers OSGVIEWER_LIBRARIES - The libraries to link for
-# osgViewer (use this)
-#
-# OSGVIEWER_LIBRARY - The osgViewer library OSGVIEWER_LIBRARY_DEBUG -
-# The osgViewer debug library
-#
-# $OSGDIR is an environment variable that would correspond to the
-# ./configure --prefix=$OSGDIR used in building osg.
-#
-# Created by Eric Wing.
+#[=======================================================================[.rst:
+FindosgViewer
+-------------
+
+
+
+This is part of the Findosg* suite used to find OpenSceneGraph
+components.  Each component is separate and you must opt in to each
+module.  You must also opt into OpenGL and OpenThreads (and Producer
+if needed) as these modules won't do it for you.  This is to allow you
+control over your own system piece by piece in case you need to opt
+out of certain components or change the Find behavior for a particular
+module (perhaps because the default FindOpenGL.cmake module doesn't
+work with your system as an example).  If you want to use a more
+convenient module that includes everything, use the
+FindOpenSceneGraph.cmake instead of the Findosg*.cmake modules.
+
+Locate osgViewer This module defines
+
+OSGVIEWER_FOUND - Was osgViewer found? OSGVIEWER_INCLUDE_DIR - Where
+to find the headers OSGVIEWER_LIBRARIES - The libraries to link for
+osgViewer (use this)
+
+OSGVIEWER_LIBRARY - The osgViewer library OSGVIEWER_LIBRARY_DEBUG -
+The osgViewer debug library
+
+$OSGDIR is an environment variable that would correspond to the
+./configure --prefix=$OSGDIR used in building osg.
+
+Created by Eric Wing.
+#]=======================================================================]
 
 # Header files are presumed to be included like
 # #include <osg/PositionAttitudeTransform>
diff --git a/Modules/FindosgVolume.cmake b/Modules/FindosgVolume.cmake
index 1178ed3..35defef 100644
--- a/Modules/FindosgVolume.cmake
+++ b/Modules/FindosgVolume.cmake
@@ -1,36 +1,37 @@
 # Distributed under the OSI-approved BSD 3-Clause License.  See accompanying
 # file Copyright.txt or https://cmake.org/licensing for details.
 
-#.rst:
-# FindosgVolume
-# -------------
-#
-#
-#
-# This is part of the Findosg* suite used to find OpenSceneGraph
-# components.  Each component is separate and you must opt in to each
-# module.  You must also opt into OpenGL and OpenThreads (and Producer
-# if needed) as these modules won't do it for you.  This is to allow you
-# control over your own system piece by piece in case you need to opt
-# out of certain components or change the Find behavior for a particular
-# module (perhaps because the default FindOpenGL.cmake module doesn't
-# work with your system as an example).  If you want to use a more
-# convenient module that includes everything, use the
-# FindOpenSceneGraph.cmake instead of the Findosg*.cmake modules.
-#
-# Locate osgVolume This module defines
-#
-# OSGVOLUME_FOUND - Was osgVolume found? OSGVOLUME_INCLUDE_DIR - Where
-# to find the headers OSGVOLUME_LIBRARIES - The libraries to link for
-# osgVolume (use this)
-#
-# OSGVOLUME_LIBRARY - The osgVolume library OSGVOLUME_LIBRARY_DEBUG -
-# The osgVolume debug library
-#
-# $OSGDIR is an environment variable that would correspond to the
-# ./configure --prefix=$OSGDIR used in building osg.
-#
-# Created by Eric Wing.
+#[=======================================================================[.rst:
+FindosgVolume
+-------------
+
+
+
+This is part of the Findosg* suite used to find OpenSceneGraph
+components.  Each component is separate and you must opt in to each
+module.  You must also opt into OpenGL and OpenThreads (and Producer
+if needed) as these modules won't do it for you.  This is to allow you
+control over your own system piece by piece in case you need to opt
+out of certain components or change the Find behavior for a particular
+module (perhaps because the default FindOpenGL.cmake module doesn't
+work with your system as an example).  If you want to use a more
+convenient module that includes everything, use the
+FindOpenSceneGraph.cmake instead of the Findosg*.cmake modules.
+
+Locate osgVolume This module defines
+
+OSGVOLUME_FOUND - Was osgVolume found? OSGVOLUME_INCLUDE_DIR - Where
+to find the headers OSGVOLUME_LIBRARIES - The libraries to link for
+osgVolume (use this)
+
+OSGVOLUME_LIBRARY - The osgVolume library OSGVOLUME_LIBRARY_DEBUG -
+The osgVolume debug library
+
+$OSGDIR is an environment variable that would correspond to the
+./configure --prefix=$OSGDIR used in building osg.
+
+Created by Eric Wing.
+#]=======================================================================]
 
 # Header files are presumed to be included like
 # #include <osg/PositionAttitudeTransform>
diff --git a/Modules/FindosgWidget.cmake b/Modules/FindosgWidget.cmake
index 78999ec..c7aae44 100644
--- a/Modules/FindosgWidget.cmake
+++ b/Modules/FindosgWidget.cmake
@@ -1,37 +1,38 @@
 # Distributed under the OSI-approved BSD 3-Clause License.  See accompanying
 # file Copyright.txt or https://cmake.org/licensing for details.
 
-#.rst:
-# FindosgWidget
-# -------------
-#
-#
-#
-# This is part of the Findosg* suite used to find OpenSceneGraph
-# components.  Each component is separate and you must opt in to each
-# module.  You must also opt into OpenGL and OpenThreads (and Producer
-# if needed) as these modules won't do it for you.  This is to allow you
-# control over your own system piece by piece in case you need to opt
-# out of certain components or change the Find behavior for a particular
-# module (perhaps because the default FindOpenGL.cmake module doesn't
-# work with your system as an example).  If you want to use a more
-# convenient module that includes everything, use the
-# FindOpenSceneGraph.cmake instead of the Findosg*.cmake modules.
-#
-# Locate osgWidget This module defines
-#
-# OSGWIDGET_FOUND - Was osgWidget found? OSGWIDGET_INCLUDE_DIR - Where
-# to find the headers OSGWIDGET_LIBRARIES - The libraries to link for
-# osgWidget (use this)
-#
-# OSGWIDGET_LIBRARY - The osgWidget library OSGWIDGET_LIBRARY_DEBUG -
-# The osgWidget debug library
-#
-# $OSGDIR is an environment variable that would correspond to the
-# ./configure --prefix=$OSGDIR used in building osg.
-#
-# FindosgWidget.cmake tweaked from Findosg* suite as created by Eric
-# Wing.
+#[=======================================================================[.rst:
+FindosgWidget
+-------------
+
+
+
+This is part of the Findosg* suite used to find OpenSceneGraph
+components.  Each component is separate and you must opt in to each
+module.  You must also opt into OpenGL and OpenThreads (and Producer
+if needed) as these modules won't do it for you.  This is to allow you
+control over your own system piece by piece in case you need to opt
+out of certain components or change the Find behavior for a particular
+module (perhaps because the default FindOpenGL.cmake module doesn't
+work with your system as an example).  If you want to use a more
+convenient module that includes everything, use the
+FindOpenSceneGraph.cmake instead of the Findosg*.cmake modules.
+
+Locate osgWidget This module defines
+
+OSGWIDGET_FOUND - Was osgWidget found? OSGWIDGET_INCLUDE_DIR - Where
+to find the headers OSGWIDGET_LIBRARIES - The libraries to link for
+osgWidget (use this)
+
+OSGWIDGET_LIBRARY - The osgWidget library OSGWIDGET_LIBRARY_DEBUG -
+The osgWidget debug library
+
+$OSGDIR is an environment variable that would correspond to the
+./configure --prefix=$OSGDIR used in building osg.
+
+FindosgWidget.cmake tweaked from Findosg* suite as created by Eric
+Wing.
+#]=======================================================================]
 
 # Header files are presumed to be included like
 # #include <osg/PositionAttitudeTransform>
diff --git a/Modules/Findosg_functions.cmake b/Modules/Findosg_functions.cmake
index adaeb6b..40df4d5 100644
--- a/Modules/Findosg_functions.cmake
+++ b/Modules/Findosg_functions.cmake
@@ -1,17 +1,18 @@
 # Distributed under the OSI-approved BSD 3-Clause License.  See accompanying
 # file Copyright.txt or https://cmake.org/licensing for details.
 
-#.rst:
-# Findosg_functions
-# -----------------
-#
-#
-#
-#
-#
-# This CMake file contains two macros to assist with searching for OSG
-# libraries and nodekits.  Please see FindOpenSceneGraph.cmake for full
-# documentation.
+#[=======================================================================[.rst:
+Findosg_functions
+-----------------
+
+
+
+
+
+This CMake file contains two macros to assist with searching for OSG
+libraries and nodekits.  Please see FindOpenSceneGraph.cmake for full
+documentation.
+#]=======================================================================]
 
 include(${CMAKE_CURRENT_LIST_DIR}/SelectLibraryConfigurations.cmake)
 
diff --git a/Modules/FindwxWidgets.cmake b/Modules/FindwxWidgets.cmake
index e366842..c813ead 100644
--- a/Modules/FindwxWidgets.cmake
+++ b/Modules/FindwxWidgets.cmake
@@ -1,111 +1,112 @@
 # Distributed under the OSI-approved BSD 3-Clause License.  See accompanying
 # file Copyright.txt or https://cmake.org/licensing for details.
 
-#.rst:
-# FindwxWidgets
-# -------------
-#
-# Find a wxWidgets (a.k.a., wxWindows) installation.
-#
-# This module finds if wxWidgets is installed and selects a default
-# configuration to use.  wxWidgets is a modular library.  To specify the
-# modules that you will use, you need to name them as components to the
-# package:
-#
-# find_package(wxWidgets COMPONENTS core base ... OPTIONAL_COMPONENTS net ...)
-#
-# There are two search branches: a windows style and a unix style.  For
-# windows, the following variables are searched for and set to defaults
-# in case of multiple choices.  Change them if the defaults are not
-# desired (i.e., these are the only variables you should change to
-# select a configuration):
-#
-# ::
-#
-#   wxWidgets_ROOT_DIR      - Base wxWidgets directory
-#                             (e.g., C:/wxWidgets-2.6.3).
-#   wxWidgets_LIB_DIR       - Path to wxWidgets libraries
-#                             (e.g., C:/wxWidgets-2.6.3/lib/vc_lib).
-#   wxWidgets_CONFIGURATION - Configuration to use
-#                             (e.g., msw, mswd, mswu, mswunivud, etc.)
-#   wxWidgets_EXCLUDE_COMMON_LIBRARIES
-#                           - Set to TRUE to exclude linking of
-#                             commonly required libs (e.g., png tiff
-#                             jpeg zlib regex expat).
-#
-#
-#
-# For unix style it uses the wx-config utility.  You can select between
-# debug/release, unicode/ansi, universal/non-universal, and
-# static/shared in the QtDialog or ccmake interfaces by turning ON/OFF
-# the following variables:
-#
-# ::
-#
-#   wxWidgets_USE_DEBUG
-#   wxWidgets_USE_UNICODE
-#   wxWidgets_USE_UNIVERSAL
-#   wxWidgets_USE_STATIC
-#
-#
-#
-# There is also a wxWidgets_CONFIG_OPTIONS variable for all other
-# options that need to be passed to the wx-config utility.  For example,
-# to use the base toolkit found in the /usr/local path, set the variable
-# (before calling the FIND_PACKAGE command) as such:
-#
-# ::
-#
-#   set(wxWidgets_CONFIG_OPTIONS --toolkit=base --prefix=/usr)
-#
-#
-#
-# The following are set after the configuration is done for both windows
-# and unix style:
-#
-# ::
-#
-#   wxWidgets_FOUND            - Set to TRUE if wxWidgets was found.
-#   wxWidgets_INCLUDE_DIRS     - Include directories for WIN32
-#                                i.e., where to find "wx/wx.h" and
-#                                "wx/setup.h"; possibly empty for unices.
-#   wxWidgets_LIBRARIES        - Path to the wxWidgets libraries.
-#   wxWidgets_LIBRARY_DIRS     - compile time link dirs, useful for
-#                                rpath on UNIX. Typically an empty string
-#                                in WIN32 environment.
-#   wxWidgets_DEFINITIONS      - Contains defines required to compile/link
-#                                against WX, e.g. WXUSINGDLL
-#   wxWidgets_DEFINITIONS_DEBUG- Contains defines required to compile/link
-#                                against WX debug builds, e.g. __WXDEBUG__
-#   wxWidgets_CXX_FLAGS        - Include dirs and compiler flags for
-#                                unices, empty on WIN32. Essentially
-#                                "`wx-config --cxxflags`".
-#   wxWidgets_USE_FILE         - Convenience include file.
-#
-#
-#
-# Sample usage:
-#
-# ::
-#
-#    # Note that for MinGW users the order of libs is important!
-#    find_package(wxWidgets COMPONENTS gl core base OPTIONAL_COMPONENTS net)
-#    if(wxWidgets_FOUND)
-#      include(${wxWidgets_USE_FILE})
-#      # and for each of your dependent executable/library targets:
-#      target_link_libraries(<YourTarget> ${wxWidgets_LIBRARIES})
-#    endif()
-#
-#
-#
-# If wxWidgets is required (i.e., not an optional part):
-#
-# ::
-#
-#    find_package(wxWidgets REQUIRED gl core base OPTIONAL_COMPONENTS net)
-#    include(${wxWidgets_USE_FILE})
-#    # and for each of your dependent executable/library targets:
-#    target_link_libraries(<YourTarget> ${wxWidgets_LIBRARIES})
+#[=======================================================================[.rst:
+FindwxWidgets
+-------------
+
+Find a wxWidgets (a.k.a., wxWindows) installation.
+
+This module finds if wxWidgets is installed and selects a default
+configuration to use.  wxWidgets is a modular library.  To specify the
+modules that you will use, you need to name them as components to the
+package:
+
+find_package(wxWidgets COMPONENTS core base ... OPTIONAL_COMPONENTS net ...)
+
+There are two search branches: a windows style and a unix style.  For
+windows, the following variables are searched for and set to defaults
+in case of multiple choices.  Change them if the defaults are not
+desired (i.e., these are the only variables you should change to
+select a configuration):
+
+::
+
+  wxWidgets_ROOT_DIR      - Base wxWidgets directory
+                            (e.g., C:/wxWidgets-2.6.3).
+  wxWidgets_LIB_DIR       - Path to wxWidgets libraries
+                            (e.g., C:/wxWidgets-2.6.3/lib/vc_lib).
+  wxWidgets_CONFIGURATION - Configuration to use
+                            (e.g., msw, mswd, mswu, mswunivud, etc.)
+  wxWidgets_EXCLUDE_COMMON_LIBRARIES
+                          - Set to TRUE to exclude linking of
+                            commonly required libs (e.g., png tiff
+                            jpeg zlib regex expat).
+
+
+
+For unix style it uses the wx-config utility.  You can select between
+debug/release, unicode/ansi, universal/non-universal, and
+static/shared in the QtDialog or ccmake interfaces by turning ON/OFF
+the following variables:
+
+::
+
+  wxWidgets_USE_DEBUG
+  wxWidgets_USE_UNICODE
+  wxWidgets_USE_UNIVERSAL
+  wxWidgets_USE_STATIC
+
+
+
+There is also a wxWidgets_CONFIG_OPTIONS variable for all other
+options that need to be passed to the wx-config utility.  For example,
+to use the base toolkit found in the /usr/local path, set the variable
+(before calling the FIND_PACKAGE command) as such:
+
+::
+
+  set(wxWidgets_CONFIG_OPTIONS --toolkit=base --prefix=/usr)
+
+
+
+The following are set after the configuration is done for both windows
+and unix style:
+
+::
+
+  wxWidgets_FOUND            - Set to TRUE if wxWidgets was found.
+  wxWidgets_INCLUDE_DIRS     - Include directories for WIN32
+                               i.e., where to find "wx/wx.h" and
+                               "wx/setup.h"; possibly empty for unices.
+  wxWidgets_LIBRARIES        - Path to the wxWidgets libraries.
+  wxWidgets_LIBRARY_DIRS     - compile time link dirs, useful for
+                               rpath on UNIX. Typically an empty string
+                               in WIN32 environment.
+  wxWidgets_DEFINITIONS      - Contains defines required to compile/link
+                               against WX, e.g. WXUSINGDLL
+  wxWidgets_DEFINITIONS_DEBUG- Contains defines required to compile/link
+                               against WX debug builds, e.g. __WXDEBUG__
+  wxWidgets_CXX_FLAGS        - Include dirs and compiler flags for
+                               unices, empty on WIN32. Essentially
+                               "`wx-config --cxxflags`".
+  wxWidgets_USE_FILE         - Convenience include file.
+
+
+
+Sample usage:
+
+::
+
+   # Note that for MinGW users the order of libs is important!
+   find_package(wxWidgets COMPONENTS gl core base OPTIONAL_COMPONENTS net)
+   if(wxWidgets_FOUND)
+     include(${wxWidgets_USE_FILE})
+     # and for each of your dependent executable/library targets:
+     target_link_libraries(<YourTarget> ${wxWidgets_LIBRARIES})
+   endif()
+
+
+
+If wxWidgets is required (i.e., not an optional part):
+
+::
+
+   find_package(wxWidgets REQUIRED gl core base OPTIONAL_COMPONENTS net)
+   include(${wxWidgets_USE_FILE})
+   # and for each of your dependent executable/library targets:
+   target_link_libraries(<YourTarget> ${wxWidgets_LIBRARIES})
+#]=======================================================================]
 
 #
 # FIXME: check this and provide a correct sample usage...
diff --git a/Modules/FindwxWindows.cmake b/Modules/FindwxWindows.cmake
index 115cdc6..7f25671 100644
--- a/Modules/FindwxWindows.cmake
+++ b/Modules/FindwxWindows.cmake
@@ -1,84 +1,85 @@
 # Distributed under the OSI-approved BSD 3-Clause License.  See accompanying
 # file Copyright.txt or https://cmake.org/licensing for details.
 
-#.rst:
-# FindwxWindows
-# -------------
-#
-# Find wxWindows (wxWidgets) installation
-#
-# This module finds if wxWindows/wxWidgets is installed and determines
-# where the include files and libraries are.  It also determines what
-# the name of the library is.  Please note this file is DEPRECATED and
-# replaced by FindwxWidgets.cmake.  This code sets the following
-# variables:
-#
-# ::
-#
-#   WXWINDOWS_FOUND     = system has WxWindows
-#   WXWINDOWS_LIBRARIES = path to the wxWindows libraries
-#                         on Unix/Linux with additional
-#                         linker flags from
-#                         "wx-config --libs"
-#   CMAKE_WXWINDOWS_CXX_FLAGS  = Compiler flags for wxWindows,
-#                                essentially "`wx-config --cxxflags`"
-#                                on Linux
-#   WXWINDOWS_INCLUDE_DIR      = where to find "wx/wx.h" and "wx/setup.h"
-#   WXWINDOWS_LINK_DIRECTORIES = link directories, useful for rpath on
-#                                 Unix
-#   WXWINDOWS_DEFINITIONS      = extra defines
-#
-#
-#
-# OPTIONS If you need OpenGL support please
-#
-# ::
-#
-#   set(WXWINDOWS_USE_GL 1)
-#
-# in your CMakeLists.txt *before* you include this file.
-#
-# ::
-#
-#   HAVE_ISYSTEM      - true required to replace -I by -isystem on g++
-#
-#
-#
-# For convenience include Use_wxWindows.cmake in your project's
-# CMakeLists.txt using
-# include(${CMAKE_CURRENT_LIST_DIR}/Use_wxWindows.cmake).
-#
-# USAGE
-#
-# ::
-#
-#   set(WXWINDOWS_USE_GL 1)
-#   find_package(wxWindows)
-#
-#
-#
-# NOTES wxWidgets 2.6.x is supported for monolithic builds e.g.
-# compiled in wx/build/msw dir as:
-#
-# ::
-#
-#   nmake -f makefile.vc BUILD=debug SHARED=0 USE_OPENGL=1 MONOLITHIC=1
-#
-#
-#
-# DEPRECATED
-#
-# ::
-#
-#   CMAKE_WX_CAN_COMPILE
-#   WXWINDOWS_LIBRARY
-#   CMAKE_WX_CXX_FLAGS
-#   WXWINDOWS_INCLUDE_PATH
-#
-#
-#
-# AUTHOR Jan Woetzel <http://www.mip.informatik.uni-kiel.de/~jw>
-# (07/2003-01/2006)
+#[=======================================================================[.rst:
+FindwxWindows
+-------------
+
+Find wxWindows (wxWidgets) installation
+
+This module finds if wxWindows/wxWidgets is installed and determines
+where the include files and libraries are.  It also determines what
+the name of the library is.  Please note this file is DEPRECATED and
+replaced by FindwxWidgets.cmake.  This code sets the following
+variables:
+
+::
+
+  WXWINDOWS_FOUND     = system has WxWindows
+  WXWINDOWS_LIBRARIES = path to the wxWindows libraries
+                        on Unix/Linux with additional
+                        linker flags from
+                        "wx-config --libs"
+  CMAKE_WXWINDOWS_CXX_FLAGS  = Compiler flags for wxWindows,
+                               essentially "`wx-config --cxxflags`"
+                               on Linux
+  WXWINDOWS_INCLUDE_DIR      = where to find "wx/wx.h" and "wx/setup.h"
+  WXWINDOWS_LINK_DIRECTORIES = link directories, useful for rpath on
+                                Unix
+  WXWINDOWS_DEFINITIONS      = extra defines
+
+
+
+OPTIONS If you need OpenGL support please
+
+::
+
+  set(WXWINDOWS_USE_GL 1)
+
+in your CMakeLists.txt *before* you include this file.
+
+::
+
+  HAVE_ISYSTEM      - true required to replace -I by -isystem on g++
+
+
+
+For convenience include Use_wxWindows.cmake in your project's
+CMakeLists.txt using
+include(${CMAKE_CURRENT_LIST_DIR}/Use_wxWindows.cmake).
+
+USAGE
+
+::
+
+  set(WXWINDOWS_USE_GL 1)
+  find_package(wxWindows)
+
+
+
+NOTES wxWidgets 2.6.x is supported for monolithic builds e.g.
+compiled in wx/build/msw dir as:
+
+::
+
+  nmake -f makefile.vc BUILD=debug SHARED=0 USE_OPENGL=1 MONOLITHIC=1
+
+
+
+DEPRECATED
+
+::
+
+  CMAKE_WX_CAN_COMPILE
+  WXWINDOWS_LIBRARY
+  CMAKE_WX_CXX_FLAGS
+  WXWINDOWS_INCLUDE_PATH
+
+
+
+AUTHOR Jan Woetzel <http://www.mip.informatik.uni-kiel.de/~jw>
+(07/2003-01/2006)
+#]=======================================================================]
 
 # ------------------------------------------------------------------
 #
diff --git a/Modules/GNUInstallDirs.cmake b/Modules/GNUInstallDirs.cmake
index 9dd464c..2a80b7d 100644
--- a/Modules/GNUInstallDirs.cmake
+++ b/Modules/GNUInstallDirs.cmake
@@ -1,127 +1,128 @@
 # Distributed under the OSI-approved BSD 3-Clause License.  See accompanying
 # file Copyright.txt or https://cmake.org/licensing for details.
 
-#.rst:
-# GNUInstallDirs
-# --------------
-#
-# Define GNU standard installation directories
-#
-# Provides install directory variables as defined by the
-# `GNU Coding Standards`_.
-#
-# .. _`GNU Coding Standards`: https://www.gnu.org/prep/standards/html_node/Directory-Variables.html
-#
-# Result Variables
-# ^^^^^^^^^^^^^^^^
-#
-# Inclusion of this module defines the following variables:
-#
-# ``CMAKE_INSTALL_<dir>``
-#
-#   Destination for files of a given type.  This value may be passed to
-#   the ``DESTINATION`` options of :command:`install` commands for the
-#   corresponding file type.
-#
-# ``CMAKE_INSTALL_FULL_<dir>``
-#
-#   The absolute path generated from the corresponding ``CMAKE_INSTALL_<dir>``
-#   value.  If the value is not already an absolute path, an absolute path
-#   is constructed typically by prepending the value of the
-#   :variable:`CMAKE_INSTALL_PREFIX` variable.  However, there are some
-#   `special cases`_ as documented below.
-#
-# where ``<dir>`` is one of:
-#
-# ``BINDIR``
-#   user executables (``bin``)
-# ``SBINDIR``
-#   system admin executables (``sbin``)
-# ``LIBEXECDIR``
-#   program executables (``libexec``)
-# ``SYSCONFDIR``
-#   read-only single-machine data (``etc``)
-# ``SHAREDSTATEDIR``
-#   modifiable architecture-independent data (``com``)
-# ``LOCALSTATEDIR``
-#   modifiable single-machine data (``var``)
-# ``RUNSTATEDIR``
-#   run-time variable data (``LOCALSTATEDIR/run``)
-# ``LIBDIR``
-#   object code libraries (``lib`` or ``lib64``
-#   or ``lib/<multiarch-tuple>`` on Debian)
-# ``INCLUDEDIR``
-#   C header files (``include``)
-# ``OLDINCLUDEDIR``
-#   C header files for non-gcc (``/usr/include``)
-# ``DATAROOTDIR``
-#   read-only architecture-independent data root (``share``)
-# ``DATADIR``
-#   read-only architecture-independent data (``DATAROOTDIR``)
-# ``INFODIR``
-#   info documentation (``DATAROOTDIR/info``)
-# ``LOCALEDIR``
-#   locale-dependent data (``DATAROOTDIR/locale``)
-# ``MANDIR``
-#   man documentation (``DATAROOTDIR/man``)
-# ``DOCDIR``
-#   documentation root (``DATAROOTDIR/doc/PROJECT_NAME``)
-#
-# If the includer does not define a value the above-shown default will be
-# used and the value will appear in the cache for editing by the user.
-#
-# Special Cases
-# ^^^^^^^^^^^^^
-#
-# The following values of :variable:`CMAKE_INSTALL_PREFIX` are special:
-#
-# ``/``
-#
-#   For ``<dir>`` other than the ``SYSCONFDIR``, ``LOCALSTATEDIR`` and
-#   ``RUNSTATEDIR``, the value of ``CMAKE_INSTALL_<dir>`` is prefixed
-#   with ``usr/`` if it is not user-specified as an absolute path.
-#   For example, the ``INCLUDEDIR`` value ``include`` becomes ``usr/include``.
-#   This is required by the `GNU Coding Standards`_, which state:
-#
-#     When building the complete GNU system, the prefix will be empty
-#     and ``/usr`` will be a symbolic link to ``/``.
-#
-# ``/usr``
-#
-#   For ``<dir>`` equal to ``SYSCONFDIR``, ``LOCALSTATEDIR`` or
-#   ``RUNSTATEDIR``, the ``CMAKE_INSTALL_FULL_<dir>`` is computed by
-#   prepending just ``/`` to the value of ``CMAKE_INSTALL_<dir>``
-#   if it is not user-specified as an absolute path.
-#   For example, the ``SYSCONFDIR`` value ``etc`` becomes ``/etc``.
-#   This is required by the `GNU Coding Standards`_.
-#
-# ``/opt/...``
-#
-#   For ``<dir>`` equal to ``SYSCONFDIR``, ``LOCALSTATEDIR`` or
-#   ``RUNSTATEDIR``, the ``CMAKE_INSTALL_FULL_<dir>`` is computed by
-#   *appending* the prefix to the value of ``CMAKE_INSTALL_<dir>``
-#   if it is not user-specified as an absolute path.
-#   For example, the ``SYSCONFDIR`` value ``etc`` becomes ``/etc/opt/...``.
-#   This is defined by the `Filesystem Hierarchy Standard`_.
-#
-# .. _`Filesystem Hierarchy Standard`: https://refspecs.linuxfoundation.org/FHS_3.0/fhs/index.html
-#
-# Macros
-# ^^^^^^
-#
-# .. command:: GNUInstallDirs_get_absolute_install_dir
-#
-#   ::
-#
-#     GNUInstallDirs_get_absolute_install_dir(absvar var)
-#
-#   Set the given variable ``absvar`` to the absolute path contained
-#   within the variable ``var``.  This is to allow the computation of an
-#   absolute path, accounting for all the special cases documented
-#   above.  While this macro is used to compute the various
-#   ``CMAKE_INSTALL_FULL_<dir>`` variables, it is exposed publicly to
-#   allow users who create additional path variables to also compute
-#   absolute paths where necessary, using the same logic.
+#[=======================================================================[.rst:
+GNUInstallDirs
+--------------
+
+Define GNU standard installation directories
+
+Provides install directory variables as defined by the
+`GNU Coding Standards`_.
+
+.. _`GNU Coding Standards`: https://www.gnu.org/prep/standards/html_node/Directory-Variables.html
+
+Result Variables
+^^^^^^^^^^^^^^^^
+
+Inclusion of this module defines the following variables:
+
+``CMAKE_INSTALL_<dir>``
+
+  Destination for files of a given type.  This value may be passed to
+  the ``DESTINATION`` options of :command:`install` commands for the
+  corresponding file type.
+
+``CMAKE_INSTALL_FULL_<dir>``
+
+  The absolute path generated from the corresponding ``CMAKE_INSTALL_<dir>``
+  value.  If the value is not already an absolute path, an absolute path
+  is constructed typically by prepending the value of the
+  :variable:`CMAKE_INSTALL_PREFIX` variable.  However, there are some
+  `special cases`_ as documented below.
+
+where ``<dir>`` is one of:
+
+``BINDIR``
+  user executables (``bin``)
+``SBINDIR``
+  system admin executables (``sbin``)
+``LIBEXECDIR``
+  program executables (``libexec``)
+``SYSCONFDIR``
+  read-only single-machine data (``etc``)
+``SHAREDSTATEDIR``
+  modifiable architecture-independent data (``com``)
+``LOCALSTATEDIR``
+  modifiable single-machine data (``var``)
+``RUNSTATEDIR``
+  run-time variable data (``LOCALSTATEDIR/run``)
+``LIBDIR``
+  object code libraries (``lib`` or ``lib64``
+  or ``lib/<multiarch-tuple>`` on Debian)
+``INCLUDEDIR``
+  C header files (``include``)
+``OLDINCLUDEDIR``
+  C header files for non-gcc (``/usr/include``)
+``DATAROOTDIR``
+  read-only architecture-independent data root (``share``)
+``DATADIR``
+  read-only architecture-independent data (``DATAROOTDIR``)
+``INFODIR``
+  info documentation (``DATAROOTDIR/info``)
+``LOCALEDIR``
+  locale-dependent data (``DATAROOTDIR/locale``)
+``MANDIR``
+  man documentation (``DATAROOTDIR/man``)
+``DOCDIR``
+  documentation root (``DATAROOTDIR/doc/PROJECT_NAME``)
+
+If the includer does not define a value the above-shown default will be
+used and the value will appear in the cache for editing by the user.
+
+Special Cases
+^^^^^^^^^^^^^
+
+The following values of :variable:`CMAKE_INSTALL_PREFIX` are special:
+
+``/``
+
+  For ``<dir>`` other than the ``SYSCONFDIR``, ``LOCALSTATEDIR`` and
+  ``RUNSTATEDIR``, the value of ``CMAKE_INSTALL_<dir>`` is prefixed
+  with ``usr/`` if it is not user-specified as an absolute path.
+  For example, the ``INCLUDEDIR`` value ``include`` becomes ``usr/include``.
+  This is required by the `GNU Coding Standards`_, which state:
+
+    When building the complete GNU system, the prefix will be empty
+    and ``/usr`` will be a symbolic link to ``/``.
+
+``/usr``
+
+  For ``<dir>`` equal to ``SYSCONFDIR``, ``LOCALSTATEDIR`` or
+  ``RUNSTATEDIR``, the ``CMAKE_INSTALL_FULL_<dir>`` is computed by
+  prepending just ``/`` to the value of ``CMAKE_INSTALL_<dir>``
+  if it is not user-specified as an absolute path.
+  For example, the ``SYSCONFDIR`` value ``etc`` becomes ``/etc``.
+  This is required by the `GNU Coding Standards`_.
+
+``/opt/...``
+
+  For ``<dir>`` equal to ``SYSCONFDIR``, ``LOCALSTATEDIR`` or
+  ``RUNSTATEDIR``, the ``CMAKE_INSTALL_FULL_<dir>`` is computed by
+  *appending* the prefix to the value of ``CMAKE_INSTALL_<dir>``
+  if it is not user-specified as an absolute path.
+  For example, the ``SYSCONFDIR`` value ``etc`` becomes ``/etc/opt/...``.
+  This is defined by the `Filesystem Hierarchy Standard`_.
+
+.. _`Filesystem Hierarchy Standard`: https://refspecs.linuxfoundation.org/FHS_3.0/fhs/index.html
+
+Macros
+^^^^^^
+
+.. command:: GNUInstallDirs_get_absolute_install_dir
+
+  ::
+
+    GNUInstallDirs_get_absolute_install_dir(absvar var)
+
+  Set the given variable ``absvar`` to the absolute path contained
+  within the variable ``var``.  This is to allow the computation of an
+  absolute path, accounting for all the special cases documented
+  above.  While this macro is used to compute the various
+  ``CMAKE_INSTALL_FULL_<dir>`` variables, it is exposed publicly to
+  allow users who create additional path variables to also compute
+  absolute paths where necessary, using the same logic.
+#]=======================================================================]
 
 cmake_policy(PUSH)
 cmake_policy(SET CMP0054 NEW) # if() quoted variables not dereferenced
diff --git a/Modules/GenerateExportHeader.cmake b/Modules/GenerateExportHeader.cmake
index e6dcd00..f2e4527 100644
--- a/Modules/GenerateExportHeader.cmake
+++ b/Modules/GenerateExportHeader.cmake
@@ -1,189 +1,190 @@
 # Distributed under the OSI-approved BSD 3-Clause License.  See accompanying
 # file Copyright.txt or https://cmake.org/licensing for details.
 
-#.rst:
-# GenerateExportHeader
-# --------------------
-#
-# Function for generation of export macros for libraries
-#
-# This module provides the function GENERATE_EXPORT_HEADER().
-#
-# The ``GENERATE_EXPORT_HEADER`` function can be used to generate a file
-# suitable for preprocessor inclusion which contains EXPORT macros to be
-# used in library classes::
-#
-#    GENERATE_EXPORT_HEADER( LIBRARY_TARGET
-#              [BASE_NAME <base_name>]
-#              [EXPORT_MACRO_NAME <export_macro_name>]
-#              [EXPORT_FILE_NAME <export_file_name>]
-#              [DEPRECATED_MACRO_NAME <deprecated_macro_name>]
-#              [NO_EXPORT_MACRO_NAME <no_export_macro_name>]
-#              [INCLUDE_GUARD_NAME <include_guard_name>]
-#              [STATIC_DEFINE <static_define>]
-#              [NO_DEPRECATED_MACRO_NAME <no_deprecated_macro_name>]
-#              [DEFINE_NO_DEPRECATED]
-#              [PREFIX_NAME <prefix_name>]
-#              [CUSTOM_CONTENT_FROM_VARIABLE <variable>]
-#    )
-#
-#
-# The target properties :prop_tgt:`CXX_VISIBILITY_PRESET <<LANG>_VISIBILITY_PRESET>`
-# and :prop_tgt:`VISIBILITY_INLINES_HIDDEN` can be used to add the appropriate
-# compile flags for targets.  See the documentation of those target properties,
-# and the convenience variables
-# :variable:`CMAKE_CXX_VISIBILITY_PRESET <CMAKE_<LANG>_VISIBILITY_PRESET>` and
-# :variable:`CMAKE_VISIBILITY_INLINES_HIDDEN`.
-#
-# By default ``GENERATE_EXPORT_HEADER()`` generates macro names in a file
-# name determined by the name of the library.  This means that in the
-# simplest case, users of ``GenerateExportHeader`` will be equivalent to:
-#
-# .. code-block:: cmake
-#
-#    set(CMAKE_CXX_VISIBILITY_PRESET hidden)
-#    set(CMAKE_VISIBILITY_INLINES_HIDDEN 1)
-#    add_library(somelib someclass.cpp)
-#    generate_export_header(somelib)
-#    install(TARGETS somelib DESTINATION ${LIBRARY_INSTALL_DIR})
-#    install(FILES
-#     someclass.h
-#     ${PROJECT_BINARY_DIR}/somelib_export.h DESTINATION ${INCLUDE_INSTALL_DIR}
-#    )
-#
-#
-# And in the ABI header files:
-#
-# .. code-block:: c++
-#
-#    #include "somelib_export.h"
-#    class SOMELIB_EXPORT SomeClass {
-#      ...
-#    };
-#
-#
-# The CMake fragment will generate a file in the
-# ``${CMAKE_CURRENT_BINARY_DIR}`` called ``somelib_export.h`` containing the
-# macros ``SOMELIB_EXPORT``, ``SOMELIB_NO_EXPORT``, ``SOMELIB_DEPRECATED``,
-# ``SOMELIB_DEPRECATED_EXPORT`` and ``SOMELIB_DEPRECATED_NO_EXPORT``.
-# They will be followed by content taken from the variable specified by
-# the ``CUSTOM_CONTENT_FROM_VARIABLE`` option, if any.
-# The resulting file should be installed with other headers in the library.
-#
-# The ``BASE_NAME`` argument can be used to override the file name and the
-# names used for the macros:
-#
-# .. code-block:: cmake
-#
-#    add_library(somelib someclass.cpp)
-#    generate_export_header(somelib
-#      BASE_NAME other_name
-#    )
-#
-#
-# Generates a file called ``other_name_export.h`` containing the macros
-# ``OTHER_NAME_EXPORT``, ``OTHER_NAME_NO_EXPORT`` and ``OTHER_NAME_DEPRECATED``
-# etc.
-#
-# The ``BASE_NAME`` may be overridden by specifying other options in the
-# function.  For example:
-#
-# .. code-block:: cmake
-#
-#    add_library(somelib someclass.cpp)
-#    generate_export_header(somelib
-#      EXPORT_MACRO_NAME OTHER_NAME_EXPORT
-#    )
-#
-#
-# creates the macro ``OTHER_NAME_EXPORT`` instead of ``SOMELIB_EXPORT``, but
-# other macros and the generated file name is as default:
-#
-# .. code-block:: cmake
-#
-#    add_library(somelib someclass.cpp)
-#    generate_export_header(somelib
-#      DEPRECATED_MACRO_NAME KDE_DEPRECATED
-#    )
-#
-#
-# creates the macro ``KDE_DEPRECATED`` instead of ``SOMELIB_DEPRECATED``.
-#
-# If ``LIBRARY_TARGET`` is a static library, macros are defined without
-# values.
-#
-# If the same sources are used to create both a shared and a static
-# library, the uppercased symbol ``${BASE_NAME}_STATIC_DEFINE`` should be
-# used when building the static library:
-#
-# .. code-block:: cmake
-#
-#    add_library(shared_variant SHARED ${lib_SRCS})
-#    add_library(static_variant ${lib_SRCS})
-#    generate_export_header(shared_variant BASE_NAME libshared_and_static)
-#    set_target_properties(static_variant PROPERTIES
-#      COMPILE_FLAGS -DLIBSHARED_AND_STATIC_STATIC_DEFINE)
-#
-# This will cause the export macros to expand to nothing when building
-# the static library.
-#
-# If ``DEFINE_NO_DEPRECATED`` is specified, then a macro
-# ``${BASE_NAME}_NO_DEPRECATED`` will be defined This macro can be used to
-# remove deprecated code from preprocessor output:
-#
-# .. code-block:: cmake
-#
-#    option(EXCLUDE_DEPRECATED "Exclude deprecated parts of the library" FALSE)
-#    if (EXCLUDE_DEPRECATED)
-#      set(NO_BUILD_DEPRECATED DEFINE_NO_DEPRECATED)
-#    endif()
-#    generate_export_header(somelib ${NO_BUILD_DEPRECATED})
-#
-#
-# And then in somelib:
-#
-# .. code-block:: c++
-#
-#    class SOMELIB_EXPORT SomeClass
-#    {
-#    public:
-#    #ifndef SOMELIB_NO_DEPRECATED
-#      SOMELIB_DEPRECATED void oldMethod();
-#    #endif
-#    };
-#
-# .. code-block:: c++
-#
-#    #ifndef SOMELIB_NO_DEPRECATED
-#    void SomeClass::oldMethod() {  }
-#    #endif
-#
-#
-# If ``PREFIX_NAME`` is specified, the argument will be used as a prefix to
-# all generated macros.
-#
-# For example:
-#
-# .. code-block:: cmake
-#
-#    generate_export_header(somelib PREFIX_NAME VTK_)
-#
-# Generates the macros ``VTK_SOMELIB_EXPORT`` etc.
-#
-# ::
-#
-#    ADD_COMPILER_EXPORT_FLAGS( [<output_variable>] )
-#
-# The ``ADD_COMPILER_EXPORT_FLAGS`` function adds ``-fvisibility=hidden`` to
-# :variable:`CMAKE_CXX_FLAGS <CMAKE_<LANG>_FLAGS>` if supported, and is a no-op
-# on Windows which does not need extra compiler flags for exporting support.
-# You may optionally pass a single argument to ``ADD_COMPILER_EXPORT_FLAGS``
-# that will be populated with the ``CXX_FLAGS`` required to enable visibility
-# support for the compiler/architecture in use.
-#
-# This function is deprecated.  Set the target properties
-# :prop_tgt:`CXX_VISIBILITY_PRESET <<LANG>_VISIBILITY_PRESET>` and
-# :prop_tgt:`VISIBILITY_INLINES_HIDDEN` instead.
+#[=======================================================================[.rst:
+GenerateExportHeader
+--------------------
+
+Function for generation of export macros for libraries
+
+This module provides the function GENERATE_EXPORT_HEADER().
+
+The ``GENERATE_EXPORT_HEADER`` function can be used to generate a file
+suitable for preprocessor inclusion which contains EXPORT macros to be
+used in library classes::
+
+   GENERATE_EXPORT_HEADER( LIBRARY_TARGET
+             [BASE_NAME <base_name>]
+             [EXPORT_MACRO_NAME <export_macro_name>]
+             [EXPORT_FILE_NAME <export_file_name>]
+             [DEPRECATED_MACRO_NAME <deprecated_macro_name>]
+             [NO_EXPORT_MACRO_NAME <no_export_macro_name>]
+             [INCLUDE_GUARD_NAME <include_guard_name>]
+             [STATIC_DEFINE <static_define>]
+             [NO_DEPRECATED_MACRO_NAME <no_deprecated_macro_name>]
+             [DEFINE_NO_DEPRECATED]
+             [PREFIX_NAME <prefix_name>]
+             [CUSTOM_CONTENT_FROM_VARIABLE <variable>]
+   )
+
+
+The target properties :prop_tgt:`CXX_VISIBILITY_PRESET <<LANG>_VISIBILITY_PRESET>`
+and :prop_tgt:`VISIBILITY_INLINES_HIDDEN` can be used to add the appropriate
+compile flags for targets.  See the documentation of those target properties,
+and the convenience variables
+:variable:`CMAKE_CXX_VISIBILITY_PRESET <CMAKE_<LANG>_VISIBILITY_PRESET>` and
+:variable:`CMAKE_VISIBILITY_INLINES_HIDDEN`.
+
+By default ``GENERATE_EXPORT_HEADER()`` generates macro names in a file
+name determined by the name of the library.  This means that in the
+simplest case, users of ``GenerateExportHeader`` will be equivalent to:
+
+.. code-block:: cmake
+
+   set(CMAKE_CXX_VISIBILITY_PRESET hidden)
+   set(CMAKE_VISIBILITY_INLINES_HIDDEN 1)
+   add_library(somelib someclass.cpp)
+   generate_export_header(somelib)
+   install(TARGETS somelib DESTINATION ${LIBRARY_INSTALL_DIR})
+   install(FILES
+    someclass.h
+    ${PROJECT_BINARY_DIR}/somelib_export.h DESTINATION ${INCLUDE_INSTALL_DIR}
+   )
+
+
+And in the ABI header files:
+
+.. code-block:: c++
+
+   #include "somelib_export.h"
+   class SOMELIB_EXPORT SomeClass {
+     ...
+   };
+
+
+The CMake fragment will generate a file in the
+``${CMAKE_CURRENT_BINARY_DIR}`` called ``somelib_export.h`` containing the
+macros ``SOMELIB_EXPORT``, ``SOMELIB_NO_EXPORT``, ``SOMELIB_DEPRECATED``,
+``SOMELIB_DEPRECATED_EXPORT`` and ``SOMELIB_DEPRECATED_NO_EXPORT``.
+They will be followed by content taken from the variable specified by
+the ``CUSTOM_CONTENT_FROM_VARIABLE`` option, if any.
+The resulting file should be installed with other headers in the library.
+
+The ``BASE_NAME`` argument can be used to override the file name and the
+names used for the macros:
+
+.. code-block:: cmake
+
+   add_library(somelib someclass.cpp)
+   generate_export_header(somelib
+     BASE_NAME other_name
+   )
+
+
+Generates a file called ``other_name_export.h`` containing the macros
+``OTHER_NAME_EXPORT``, ``OTHER_NAME_NO_EXPORT`` and ``OTHER_NAME_DEPRECATED``
+etc.
+
+The ``BASE_NAME`` may be overridden by specifying other options in the
+function.  For example:
+
+.. code-block:: cmake
+
+   add_library(somelib someclass.cpp)
+   generate_export_header(somelib
+     EXPORT_MACRO_NAME OTHER_NAME_EXPORT
+   )
+
+
+creates the macro ``OTHER_NAME_EXPORT`` instead of ``SOMELIB_EXPORT``, but
+other macros and the generated file name is as default:
+
+.. code-block:: cmake
+
+   add_library(somelib someclass.cpp)
+   generate_export_header(somelib
+     DEPRECATED_MACRO_NAME KDE_DEPRECATED
+   )
+
+
+creates the macro ``KDE_DEPRECATED`` instead of ``SOMELIB_DEPRECATED``.
+
+If ``LIBRARY_TARGET`` is a static library, macros are defined without
+values.
+
+If the same sources are used to create both a shared and a static
+library, the uppercased symbol ``${BASE_NAME}_STATIC_DEFINE`` should be
+used when building the static library:
+
+.. code-block:: cmake
+
+   add_library(shared_variant SHARED ${lib_SRCS})
+   add_library(static_variant ${lib_SRCS})
+   generate_export_header(shared_variant BASE_NAME libshared_and_static)
+   set_target_properties(static_variant PROPERTIES
+     COMPILE_FLAGS -DLIBSHARED_AND_STATIC_STATIC_DEFINE)
+
+This will cause the export macros to expand to nothing when building
+the static library.
+
+If ``DEFINE_NO_DEPRECATED`` is specified, then a macro
+``${BASE_NAME}_NO_DEPRECATED`` will be defined This macro can be used to
+remove deprecated code from preprocessor output:
+
+.. code-block:: cmake
+
+   option(EXCLUDE_DEPRECATED "Exclude deprecated parts of the library" FALSE)
+   if (EXCLUDE_DEPRECATED)
+     set(NO_BUILD_DEPRECATED DEFINE_NO_DEPRECATED)
+   endif()
+   generate_export_header(somelib ${NO_BUILD_DEPRECATED})
+
+
+And then in somelib:
+
+.. code-block:: c++
+
+   class SOMELIB_EXPORT SomeClass
+   {
+   public:
+   #ifndef SOMELIB_NO_DEPRECATED
+     SOMELIB_DEPRECATED void oldMethod();
+   #endif
+   };
+
+.. code-block:: c++
+
+   #ifndef SOMELIB_NO_DEPRECATED
+   void SomeClass::oldMethod() {  }
+   #endif
+
+
+If ``PREFIX_NAME`` is specified, the argument will be used as a prefix to
+all generated macros.
+
+For example:
+
+.. code-block:: cmake
+
+   generate_export_header(somelib PREFIX_NAME VTK_)
+
+Generates the macros ``VTK_SOMELIB_EXPORT`` etc.
+
+::
+
+   ADD_COMPILER_EXPORT_FLAGS( [<output_variable>] )
+
+The ``ADD_COMPILER_EXPORT_FLAGS`` function adds ``-fvisibility=hidden`` to
+:variable:`CMAKE_CXX_FLAGS <CMAKE_<LANG>_FLAGS>` if supported, and is a no-op
+on Windows which does not need extra compiler flags for exporting support.
+You may optionally pass a single argument to ``ADD_COMPILER_EXPORT_FLAGS``
+that will be populated with the ``CXX_FLAGS`` required to enable visibility
+support for the compiler/architecture in use.
+
+This function is deprecated.  Set the target properties
+:prop_tgt:`CXX_VISIBILITY_PRESET <<LANG>_VISIBILITY_PRESET>` and
+:prop_tgt:`VISIBILITY_INLINES_HIDDEN` instead.
+#]=======================================================================]
 
 include(CheckCCompilerFlag)
 include(CheckCXXCompilerFlag)
diff --git a/Modules/GetPrerequisites.cmake b/Modules/GetPrerequisites.cmake
index ca71009..5b32f7c 100644
--- a/Modules/GetPrerequisites.cmake
+++ b/Modules/GetPrerequisites.cmake
@@ -1,169 +1,170 @@
 # Distributed under the OSI-approved BSD 3-Clause License.  See accompanying
 # file Copyright.txt or https://cmake.org/licensing for details.
 
-#.rst:
-# GetPrerequisites
-# ----------------
-#
-# Functions to analyze and list executable file prerequisites.
-#
-# This module provides functions to list the .dll, .dylib or .so files
-# that an executable or shared library file depends on.  (Its
-# prerequisites.)
-#
-# It uses various tools to obtain the list of required shared library
-# files:
-#
-# ::
-#
-#    dumpbin (Windows)
-#    objdump (MinGW on Windows)
-#    ldd (Linux/Unix)
-#    otool (Mac OSX)
-#
-# The following functions are provided by this module:
-#
-# ::
-#
-#    get_prerequisites
-#    list_prerequisites
-#    list_prerequisites_by_glob
-#    gp_append_unique
-#    is_file_executable
-#    gp_item_default_embedded_path
-#      (projects can override with gp_item_default_embedded_path_override)
-#    gp_resolve_item
-#      (projects can override with gp_resolve_item_override)
-#    gp_resolved_file_type
-#      (projects can override with gp_resolved_file_type_override)
-#    gp_file_type
-#
-# Requires CMake 2.6 or greater because it uses function, break, return
-# and PARENT_SCOPE.
-#
-# ::
-#
-#   GET_PREREQUISITES(<target> <prerequisites_var> <exclude_system> <recurse>
-#                     <exepath> <dirs> [<rpaths>])
-#
-# Get the list of shared library files required by <target>.  The list
-# in the variable named <prerequisites_var> should be empty on first
-# entry to this function.  On exit, <prerequisites_var> will contain the
-# list of required shared library files.
-#
-# <target> is the full path to an executable file.  <prerequisites_var>
-# is the name of a CMake variable to contain the results.
-# <exclude_system> must be 0 or 1 indicating whether to include or
-# exclude "system" prerequisites.  If <recurse> is set to 1 all
-# prerequisites will be found recursively, if set to 0 only direct
-# prerequisites are listed.  <exepath> is the path to the top level
-# executable used for @executable_path replacment on the Mac.  <dirs> is
-# a list of paths where libraries might be found: these paths are
-# searched first when a target without any path info is given.  Then
-# standard system locations are also searched: PATH, Framework
-# locations, /usr/lib...
-#
-# ::
-#
-#   LIST_PREREQUISITES(<target> [<recurse> [<exclude_system> [<verbose>]]])
-#
-# Print a message listing the prerequisites of <target>.
-#
-# <target> is the name of a shared library or executable target or the
-# full path to a shared library or executable file.  If <recurse> is set
-# to 1 all prerequisites will be found recursively, if set to 0 only
-# direct prerequisites are listed.  <exclude_system> must be 0 or 1
-# indicating whether to include or exclude "system" prerequisites.  With
-# <verbose> set to 0 only the full path names of the prerequisites are
-# printed, set to 1 extra informatin will be displayed.
-#
-# ::
-#
-#   LIST_PREREQUISITES_BY_GLOB(<glob_arg> <glob_exp>)
-#
-# Print the prerequisites of shared library and executable files
-# matching a globbing pattern.  <glob_arg> is GLOB or GLOB_RECURSE and
-# <glob_exp> is a globbing expression used with "file(GLOB" or
-# "file(GLOB_RECURSE" to retrieve a list of matching files.  If a
-# matching file is executable, its prerequisites are listed.
-#
-# Any additional (optional) arguments provided are passed along as the
-# optional arguments to the list_prerequisites calls.
-#
-# ::
-#
-#   GP_APPEND_UNIQUE(<list_var> <value>)
-#
-# Append <value> to the list variable <list_var> only if the value is
-# not already in the list.
-#
-# ::
-#
-#   IS_FILE_EXECUTABLE(<file> <result_var>)
-#
-# Return 1 in <result_var> if <file> is a binary executable, 0
-# otherwise.
-#
-# ::
-#
-#   GP_ITEM_DEFAULT_EMBEDDED_PATH(<item> <default_embedded_path_var>)
-#
-# Return the path that others should refer to the item by when the item
-# is embedded inside a bundle.
-#
-# Override on a per-project basis by providing a project-specific
-# gp_item_default_embedded_path_override function.
-#
-# ::
-#
-#   GP_RESOLVE_ITEM(<context> <item> <exepath> <dirs> <resolved_item_var>
-#                   [<rpaths>])
-#
-# Resolve an item into an existing full path file.
-#
-# Override on a per-project basis by providing a project-specific
-# gp_resolve_item_override function.
-#
-# ::
-#
-#   GP_RESOLVED_FILE_TYPE(<original_file> <file> <exepath> <dirs> <type_var>
-#                         [<rpaths>])
-#
-# Return the type of <file> with respect to <original_file>.  String
-# describing type of prerequisite is returned in variable named
-# <type_var>.
-#
-# Use <exepath> and <dirs> if necessary to resolve non-absolute <file>
-# values -- but only for non-embedded items.
-#
-# Possible types are:
-#
-# ::
-#
-#    system
-#    local
-#    embedded
-#    other
-#
-# Override on a per-project basis by providing a project-specific
-# gp_resolved_file_type_override function.
-#
-# ::
-#
-#   GP_FILE_TYPE(<original_file> <file> <type_var>)
-#
-# Return the type of <file> with respect to <original_file>.  String
-# describing type of prerequisite is returned in variable named
-# <type_var>.
-#
-# Possible types are:
-#
-# ::
-#
-#    system
-#    local
-#    embedded
-#    other
+#[=======================================================================[.rst:
+GetPrerequisites
+----------------
+
+Functions to analyze and list executable file prerequisites.
+
+This module provides functions to list the .dll, .dylib or .so files
+that an executable or shared library file depends on.  (Its
+prerequisites.)
+
+It uses various tools to obtain the list of required shared library
+files:
+
+::
+
+   dumpbin (Windows)
+   objdump (MinGW on Windows)
+   ldd (Linux/Unix)
+   otool (Mac OSX)
+
+The following functions are provided by this module:
+
+::
+
+   get_prerequisites
+   list_prerequisites
+   list_prerequisites_by_glob
+   gp_append_unique
+   is_file_executable
+   gp_item_default_embedded_path
+     (projects can override with gp_item_default_embedded_path_override)
+   gp_resolve_item
+     (projects can override with gp_resolve_item_override)
+   gp_resolved_file_type
+     (projects can override with gp_resolved_file_type_override)
+   gp_file_type
+
+Requires CMake 2.6 or greater because it uses function, break, return
+and PARENT_SCOPE.
+
+::
+
+  GET_PREREQUISITES(<target> <prerequisites_var> <exclude_system> <recurse>
+                    <exepath> <dirs> [<rpaths>])
+
+Get the list of shared library files required by <target>.  The list
+in the variable named <prerequisites_var> should be empty on first
+entry to this function.  On exit, <prerequisites_var> will contain the
+list of required shared library files.
+
+<target> is the full path to an executable file.  <prerequisites_var>
+is the name of a CMake variable to contain the results.
+<exclude_system> must be 0 or 1 indicating whether to include or
+exclude "system" prerequisites.  If <recurse> is set to 1 all
+prerequisites will be found recursively, if set to 0 only direct
+prerequisites are listed.  <exepath> is the path to the top level
+executable used for @executable_path replacment on the Mac.  <dirs> is
+a list of paths where libraries might be found: these paths are
+searched first when a target without any path info is given.  Then
+standard system locations are also searched: PATH, Framework
+locations, /usr/lib...
+
+::
+
+  LIST_PREREQUISITES(<target> [<recurse> [<exclude_system> [<verbose>]]])
+
+Print a message listing the prerequisites of <target>.
+
+<target> is the name of a shared library or executable target or the
+full path to a shared library or executable file.  If <recurse> is set
+to 1 all prerequisites will be found recursively, if set to 0 only
+direct prerequisites are listed.  <exclude_system> must be 0 or 1
+indicating whether to include or exclude "system" prerequisites.  With
+<verbose> set to 0 only the full path names of the prerequisites are
+printed, set to 1 extra informatin will be displayed.
+
+::
+
+  LIST_PREREQUISITES_BY_GLOB(<glob_arg> <glob_exp>)
+
+Print the prerequisites of shared library and executable files
+matching a globbing pattern.  <glob_arg> is GLOB or GLOB_RECURSE and
+<glob_exp> is a globbing expression used with "file(GLOB" or
+"file(GLOB_RECURSE" to retrieve a list of matching files.  If a
+matching file is executable, its prerequisites are listed.
+
+Any additional (optional) arguments provided are passed along as the
+optional arguments to the list_prerequisites calls.
+
+::
+
+  GP_APPEND_UNIQUE(<list_var> <value>)
+
+Append <value> to the list variable <list_var> only if the value is
+not already in the list.
+
+::
+
+  IS_FILE_EXECUTABLE(<file> <result_var>)
+
+Return 1 in <result_var> if <file> is a binary executable, 0
+otherwise.
+
+::
+
+  GP_ITEM_DEFAULT_EMBEDDED_PATH(<item> <default_embedded_path_var>)
+
+Return the path that others should refer to the item by when the item
+is embedded inside a bundle.
+
+Override on a per-project basis by providing a project-specific
+gp_item_default_embedded_path_override function.
+
+::
+
+  GP_RESOLVE_ITEM(<context> <item> <exepath> <dirs> <resolved_item_var>
+                  [<rpaths>])
+
+Resolve an item into an existing full path file.
+
+Override on a per-project basis by providing a project-specific
+gp_resolve_item_override function.
+
+::
+
+  GP_RESOLVED_FILE_TYPE(<original_file> <file> <exepath> <dirs> <type_var>
+                        [<rpaths>])
+
+Return the type of <file> with respect to <original_file>.  String
+describing type of prerequisite is returned in variable named
+<type_var>.
+
+Use <exepath> and <dirs> if necessary to resolve non-absolute <file>
+values -- but only for non-embedded items.
+
+Possible types are:
+
+::
+
+   system
+   local
+   embedded
+   other
+
+Override on a per-project basis by providing a project-specific
+gp_resolved_file_type_override function.
+
+::
+
+  GP_FILE_TYPE(<original_file> <file> <type_var>)
+
+Return the type of <file> with respect to <original_file>.  String
+describing type of prerequisite is returned in variable named
+<type_var>.
+
+Possible types are:
+
+::
+
+   system
+   local
+   embedded
+   other
+#]=======================================================================]
 
 function(gp_append_unique list_var value)
   set(contains 0)
diff --git a/Modules/InstallRequiredSystemLibraries.cmake b/Modules/InstallRequiredSystemLibraries.cmake
index 4ecba05..9a5e64d 100644
--- a/Modules/InstallRequiredSystemLibraries.cmake
+++ b/Modules/InstallRequiredSystemLibraries.cmake
@@ -1,60 +1,61 @@
 # Distributed under the OSI-approved BSD 3-Clause License.  See accompanying
 # file Copyright.txt or https://cmake.org/licensing for details.
 
-#.rst:
-# InstallRequiredSystemLibraries
-# ------------------------------
-#
-# Include this module to search for compiler-provided system runtime
-# libraries and add install rules for them.  Some optional variables
-# may be set prior to including the module to adjust behavior:
-#
-# ``CMAKE_INSTALL_SYSTEM_RUNTIME_LIBS``
-#   Specify additional runtime libraries that may not be detected.
-#   After inclusion any detected libraries will be appended to this.
-#
-# ``CMAKE_INSTALL_SYSTEM_RUNTIME_LIBS_SKIP``
-#   Set to TRUE to skip calling the :command:`install(PROGRAMS)` command to
-#   allow the includer to specify its own install rule, using the value of
-#   ``CMAKE_INSTALL_SYSTEM_RUNTIME_LIBS`` to get the list of libraries.
-#
-# ``CMAKE_INSTALL_DEBUG_LIBRARIES``
-#   Set to TRUE to install the debug runtime libraries when available
-#   with MSVC tools.
-#
-# ``CMAKE_INSTALL_DEBUG_LIBRARIES_ONLY``
-#   Set to TRUE to install only the debug runtime libraries with MSVC
-#   tools even if the release runtime libraries are also available.
-#
-# ``CMAKE_INSTALL_UCRT_LIBRARIES``
-#   Set to TRUE to install the Windows Universal CRT libraries for
-#   app-local deployment (e.g. to Windows XP).  This is meaningful
-#   only with MSVC from Visual Studio 2015 or higher.
-#
-#   One may set a ``CMAKE_WINDOWS_KITS_10_DIR`` *environment variable*
-#   to an absolute path to tell CMake to look for Windows 10 SDKs in
-#   a custom location.  The specified directory is expected to contain
-#   ``Redist/ucrt/DLLs/*`` directories.
-#
-# ``CMAKE_INSTALL_MFC_LIBRARIES``
-#   Set to TRUE to install the MSVC MFC runtime libraries.
-#
-# ``CMAKE_INSTALL_OPENMP_LIBRARIES``
-#   Set to TRUE to install the MSVC OpenMP runtime libraries
-#
-# ``CMAKE_INSTALL_SYSTEM_RUNTIME_DESTINATION``
-#   Specify the :command:`install(PROGRAMS)` command ``DESTINATION``
-#   option.  If not specified, the default is ``bin`` on Windows
-#   and ``lib`` elsewhere.
-#
-# ``CMAKE_INSTALL_SYSTEM_RUNTIME_LIBS_NO_WARNINGS``
-#   Set to TRUE to disable warnings about required library files that
-#   do not exist.  (For example, Visual Studio Express editions may
-#   not provide the redistributable files.)
-#
-# ``CMAKE_INSTALL_SYSTEM_RUNTIME_COMPONENT``
-#   Specify the :command:`install(PROGRAMS)` command ``COMPONENT``
-#   option.  If not specified, no such option will be used.
+#[=======================================================================[.rst:
+InstallRequiredSystemLibraries
+------------------------------
+
+Include this module to search for compiler-provided system runtime
+libraries and add install rules for them.  Some optional variables
+may be set prior to including the module to adjust behavior:
+
+``CMAKE_INSTALL_SYSTEM_RUNTIME_LIBS``
+  Specify additional runtime libraries that may not be detected.
+  After inclusion any detected libraries will be appended to this.
+
+``CMAKE_INSTALL_SYSTEM_RUNTIME_LIBS_SKIP``
+  Set to TRUE to skip calling the :command:`install(PROGRAMS)` command to
+  allow the includer to specify its own install rule, using the value of
+  ``CMAKE_INSTALL_SYSTEM_RUNTIME_LIBS`` to get the list of libraries.
+
+``CMAKE_INSTALL_DEBUG_LIBRARIES``
+  Set to TRUE to install the debug runtime libraries when available
+  with MSVC tools.
+
+``CMAKE_INSTALL_DEBUG_LIBRARIES_ONLY``
+  Set to TRUE to install only the debug runtime libraries with MSVC
+  tools even if the release runtime libraries are also available.
+
+``CMAKE_INSTALL_UCRT_LIBRARIES``
+  Set to TRUE to install the Windows Universal CRT libraries for
+  app-local deployment (e.g. to Windows XP).  This is meaningful
+  only with MSVC from Visual Studio 2015 or higher.
+
+  One may set a ``CMAKE_WINDOWS_KITS_10_DIR`` *environment variable*
+  to an absolute path to tell CMake to look for Windows 10 SDKs in
+  a custom location.  The specified directory is expected to contain
+  ``Redist/ucrt/DLLs/*`` directories.
+
+``CMAKE_INSTALL_MFC_LIBRARIES``
+  Set to TRUE to install the MSVC MFC runtime libraries.
+
+``CMAKE_INSTALL_OPENMP_LIBRARIES``
+  Set to TRUE to install the MSVC OpenMP runtime libraries
+
+``CMAKE_INSTALL_SYSTEM_RUNTIME_DESTINATION``
+  Specify the :command:`install(PROGRAMS)` command ``DESTINATION``
+  option.  If not specified, the default is ``bin`` on Windows
+  and ``lib`` elsewhere.
+
+``CMAKE_INSTALL_SYSTEM_RUNTIME_LIBS_NO_WARNINGS``
+  Set to TRUE to disable warnings about required library files that
+  do not exist.  (For example, Visual Studio Express editions may
+  not provide the redistributable files.)
+
+``CMAKE_INSTALL_SYSTEM_RUNTIME_COMPONENT``
+  Specify the :command:`install(PROGRAMS)` command ``COMPONENT``
+  option.  If not specified, no such option will be used.
+#]=======================================================================]
 
 cmake_policy(PUSH)
 cmake_policy(SET CMP0054 NEW) # if() quoted variables not dereferenced
diff --git a/Modules/MacroAddFileDependencies.cmake b/Modules/MacroAddFileDependencies.cmake
index db26814..39393d6 100644
--- a/Modules/MacroAddFileDependencies.cmake
+++ b/Modules/MacroAddFileDependencies.cmake
@@ -1,19 +1,20 @@
 # Distributed under the OSI-approved BSD 3-Clause License.  See accompanying
 # file Copyright.txt or https://cmake.org/licensing for details.
 
-#.rst:
-# MacroAddFileDependencies
-# ------------------------
-#
-# MACRO_ADD_FILE_DEPENDENCIES(<_file> depend_files...)
-#
-# Using the macro MACRO_ADD_FILE_DEPENDENCIES() is discouraged.  There
-# are usually better ways to specify the correct dependencies.
-#
-# MACRO_ADD_FILE_DEPENDENCIES(<_file> depend_files...) is just a
-# convenience wrapper around the OBJECT_DEPENDS source file property.
-# You can just use set_property(SOURCE <file> APPEND PROPERTY
-# OBJECT_DEPENDS depend_files) instead.
+#[=======================================================================[.rst:
+MacroAddFileDependencies
+------------------------
+
+MACRO_ADD_FILE_DEPENDENCIES(<_file> depend_files...)
+
+Using the macro MACRO_ADD_FILE_DEPENDENCIES() is discouraged.  There
+are usually better ways to specify the correct dependencies.
+
+MACRO_ADD_FILE_DEPENDENCIES(<_file> depend_files...) is just a
+convenience wrapper around the OBJECT_DEPENDS source file property.
+You can just use set_property(SOURCE <file> APPEND PROPERTY
+OBJECT_DEPENDS depend_files) instead.
+#]=======================================================================]
 
 macro (MACRO_ADD_FILE_DEPENDENCIES _file)
 
diff --git a/Modules/ProcessorCount.cmake b/Modules/ProcessorCount.cmake
index 8a37884..05f56d8 100644
--- a/Modules/ProcessorCount.cmake
+++ b/Modules/ProcessorCount.cmake
@@ -1,44 +1,45 @@
 # Distributed under the OSI-approved BSD 3-Clause License.  See accompanying
 # file Copyright.txt or https://cmake.org/licensing for details.
 
-#.rst:
-# ProcessorCount
-# --------------
-#
-# ProcessorCount(var)
-#
-# Determine the number of processors/cores and save value in ${var}
-#
-# Sets the variable named ${var} to the number of physical cores
-# available on the machine if the information can be determined.
-# Otherwise it is set to 0.  Currently this functionality is implemented
-# for AIX, cygwin, FreeBSD, HPUX, IRIX, Linux, macOS, QNX, Sun and
-# Windows.
-#
-# This function is guaranteed to return a positive integer (>=1) if it
-# succeeds.  It returns 0 if there's a problem determining the processor
-# count.
-#
-# Example use, in a ctest -S dashboard script:
-#
-# ::
-#
-#    include(ProcessorCount)
-#    ProcessorCount(N)
-#    if(NOT N EQUAL 0)
-#      set(CTEST_BUILD_FLAGS -j${N})
-#      set(ctest_test_args ${ctest_test_args} PARALLEL_LEVEL ${N})
-#    endif()
-#
-#
-#
-# This function is intended to offer an approximation of the value of
-# the number of compute cores available on the current machine, such
-# that you may use that value for parallel building and parallel
-# testing.  It is meant to help utilize as much of the machine as seems
-# reasonable.  Of course, knowledge of what else might be running on the
-# machine simultaneously should be used when deciding whether to request
-# a machine's full capacity all for yourself.
+#[=======================================================================[.rst:
+ProcessorCount
+--------------
+
+ProcessorCount(var)
+
+Determine the number of processors/cores and save value in ${var}
+
+Sets the variable named ${var} to the number of physical cores
+available on the machine if the information can be determined.
+Otherwise it is set to 0.  Currently this functionality is implemented
+for AIX, cygwin, FreeBSD, HPUX, IRIX, Linux, macOS, QNX, Sun and
+Windows.
+
+This function is guaranteed to return a positive integer (>=1) if it
+succeeds.  It returns 0 if there's a problem determining the processor
+count.
+
+Example use, in a ctest -S dashboard script:
+
+::
+
+   include(ProcessorCount)
+   ProcessorCount(N)
+   if(NOT N EQUAL 0)
+     set(CTEST_BUILD_FLAGS -j${N})
+     set(ctest_test_args ${ctest_test_args} PARALLEL_LEVEL ${N})
+   endif()
+
+
+
+This function is intended to offer an approximation of the value of
+the number of compute cores available on the current machine, such
+that you may use that value for parallel building and parallel
+testing.  It is meant to help utilize as much of the machine as seems
+reasonable.  Of course, knowledge of what else might be running on the
+machine simultaneously should be used when deciding whether to request
+a machine's full capacity all for yourself.
+#]=======================================================================]
 
 # A more reliable way might be to compile a small C program that uses the CPUID
 # instruction, but that again requires compiler support or compiling assembler
diff --git a/Modules/Qt4ConfigDependentSettings.cmake b/Modules/Qt4ConfigDependentSettings.cmake
index e21ecf4..684ec21 100644
--- a/Modules/Qt4ConfigDependentSettings.cmake
+++ b/Modules/Qt4ConfigDependentSettings.cmake
@@ -1,13 +1,14 @@
 # Distributed under the OSI-approved BSD 3-Clause License.  See accompanying
 # file Copyright.txt or https://cmake.org/licensing for details.
 
-#.rst:
-# Qt4ConfigDependentSettings
-# --------------------------
-#
-#
-#
-# This file is included by FindQt4.cmake, don't include it directly.
+#[=======================================================================[.rst:
+Qt4ConfigDependentSettings
+--------------------------
+
+
+
+This file is included by FindQt4.cmake, don't include it directly.
+#]=======================================================================]
 
 ###############################################
 #
diff --git a/Modules/Qt4Macros.cmake b/Modules/Qt4Macros.cmake
index a2c8d85..5c48970 100644
--- a/Modules/Qt4Macros.cmake
+++ b/Modules/Qt4Macros.cmake
@@ -1,13 +1,14 @@
 # Distributed under the OSI-approved BSD 3-Clause License.  See accompanying
 # file Copyright.txt or https://cmake.org/licensing for details.
 
-#.rst:
-# Qt4Macros
-# ---------
-#
-#
-#
-# This file is included by FindQt4.cmake, don't include it directly.
+#[=======================================================================[.rst:
+Qt4Macros
+---------
+
+
+
+This file is included by FindQt4.cmake, don't include it directly.
+#]=======================================================================]
 
 ######################################
 #
diff --git a/Modules/SelectLibraryConfigurations.cmake b/Modules/SelectLibraryConfigurations.cmake
index fe3bb00..8cb714d 100644
--- a/Modules/SelectLibraryConfigurations.cmake
+++ b/Modules/SelectLibraryConfigurations.cmake
@@ -1,31 +1,32 @@
 # Distributed under the OSI-approved BSD 3-Clause License.  See accompanying
 # file Copyright.txt or https://cmake.org/licensing for details.
 
-#.rst:
-# SelectLibraryConfigurations
-# ---------------------------
-#
-#
-#
-# select_library_configurations( basename )
-#
-# This macro takes a library base name as an argument, and will choose
-# good values for basename_LIBRARY, basename_LIBRARIES,
-# basename_LIBRARY_DEBUG, and basename_LIBRARY_RELEASE depending on what
-# has been found and set.  If only basename_LIBRARY_RELEASE is defined,
-# basename_LIBRARY will be set to the release value, and
-# basename_LIBRARY_DEBUG will be set to basename_LIBRARY_DEBUG-NOTFOUND.
-# If only basename_LIBRARY_DEBUG is defined, then basename_LIBRARY will
-# take the debug value, and basename_LIBRARY_RELEASE will be set to
-# basename_LIBRARY_RELEASE-NOTFOUND.
-#
-# If the generator supports configuration types, then basename_LIBRARY
-# and basename_LIBRARIES will be set with debug and optimized flags
-# specifying the library to be used for the given configuration.  If no
-# build type has been set or the generator in use does not support
-# configuration types, then basename_LIBRARY and basename_LIBRARIES will
-# take only the release value, or the debug value if the release one is
-# not set.
+#[=======================================================================[.rst:
+SelectLibraryConfigurations
+---------------------------
+
+
+
+select_library_configurations( basename )
+
+This macro takes a library base name as an argument, and will choose
+good values for basename_LIBRARY, basename_LIBRARIES,
+basename_LIBRARY_DEBUG, and basename_LIBRARY_RELEASE depending on what
+has been found and set.  If only basename_LIBRARY_RELEASE is defined,
+basename_LIBRARY will be set to the release value, and
+basename_LIBRARY_DEBUG will be set to basename_LIBRARY_DEBUG-NOTFOUND.
+If only basename_LIBRARY_DEBUG is defined, then basename_LIBRARY will
+take the debug value, and basename_LIBRARY_RELEASE will be set to
+basename_LIBRARY_RELEASE-NOTFOUND.
+
+If the generator supports configuration types, then basename_LIBRARY
+and basename_LIBRARIES will be set with debug and optimized flags
+specifying the library to be used for the given configuration.  If no
+build type has been set or the generator in use does not support
+configuration types, then basename_LIBRARY and basename_LIBRARIES will
+take only the release value, or the debug value if the release one is
+not set.
+#]=======================================================================]
 
 # This macro was adapted from the FindQt4 CMake module and is maintained by Will
 # Dicharry <wdicharry@stellarscience.com>.
diff --git a/Modules/SquishTestScript.cmake b/Modules/SquishTestScript.cmake
index c0e1bea..2a80be5 100644
--- a/Modules/SquishTestScript.cmake
+++ b/Modules/SquishTestScript.cmake
@@ -1,21 +1,22 @@
 # Distributed under the OSI-approved BSD 3-Clause License.  See accompanying
 # file Copyright.txt or https://cmake.org/licensing for details.
 
-#.rst:
-# SquishTestScript
-# ----------------
-#
-#
-#
-#
-#
-# This script launches a GUI test using Squish.  You should not call the
-# script directly; instead, you should access it via the SQUISH_ADD_TEST
-# macro that is defined in FindSquish.cmake.
-#
-# This script starts the Squish server, launches the test on the client,
-# and finally stops the squish server.  If any of these steps fail
-# (including if the tests do not pass) then a fatal error is raised.
+#[=======================================================================[.rst:
+SquishTestScript
+----------------
+
+
+
+
+
+This script launches a GUI test using Squish.  You should not call the
+script directly; instead, you should access it via the SQUISH_ADD_TEST
+macro that is defined in FindSquish.cmake.
+
+This script starts the Squish server, launches the test on the client,
+and finally stops the squish server.  If any of these steps fail
+(including if the tests do not pass) then a fatal error is raised.
+#]=======================================================================]
 
 # print out the variable that we are using
 message(STATUS "squish_aut='${squish_aut}'")
diff --git a/Modules/TestBigEndian.cmake b/Modules/TestBigEndian.cmake
index 9a4bce5..0c6e188 100644
--- a/Modules/TestBigEndian.cmake
+++ b/Modules/TestBigEndian.cmake
@@ -1,18 +1,19 @@
 # Distributed under the OSI-approved BSD 3-Clause License.  See accompanying
 # file Copyright.txt or https://cmake.org/licensing for details.
 
-#.rst:
-# TestBigEndian
-# -------------
-#
-# Define macro to determine endian type
-#
-# Check if the system is big endian or little endian
-#
-# ::
-#
-#   TEST_BIG_ENDIAN(VARIABLE)
-#   VARIABLE - variable to store the result to
+#[=======================================================================[.rst:
+TestBigEndian
+-------------
+
+Define macro to determine endian type
+
+Check if the system is big endian or little endian
+
+::
+
+  TEST_BIG_ENDIAN(VARIABLE)
+  VARIABLE - variable to store the result to
+#]=======================================================================]
 
 include(CheckTypeSize)
 
diff --git a/Modules/TestCXXAcceptsFlag.cmake b/Modules/TestCXXAcceptsFlag.cmake
index 10019ec..75f1fc3 100644
--- a/Modules/TestCXXAcceptsFlag.cmake
+++ b/Modules/TestCXXAcceptsFlag.cmake
@@ -1,22 +1,23 @@
 # Distributed under the OSI-approved BSD 3-Clause License.  See accompanying
 # file Copyright.txt or https://cmake.org/licensing for details.
 
-#.rst:
-# TestCXXAcceptsFlag
-# ------------------
-#
-# Deprecated.  See :module:`CheckCXXCompilerFlag`.
-#
-# Check if the CXX compiler accepts a flag.
-#
-# .. code-block:: cmake
-#
-#  CHECK_CXX_ACCEPTS_FLAG(<flags> <variable>)
-#
-# ``<flags>``
-#  the flags to try
-# ``<variable>``
-#  variable to store the result
+#[=======================================================================[.rst:
+TestCXXAcceptsFlag
+------------------
+
+Deprecated.  See :module:`CheckCXXCompilerFlag`.
+
+Check if the CXX compiler accepts a flag.
+
+.. code-block:: cmake
+
+ CHECK_CXX_ACCEPTS_FLAG(<flags> <variable>)
+
+``<flags>``
+ the flags to try
+``<variable>``
+ variable to store the result
+#]=======================================================================]
 
 macro(CHECK_CXX_ACCEPTS_FLAG FLAGS  VARIABLE)
   if(NOT DEFINED ${VARIABLE})
diff --git a/Modules/TestForANSIForScope.cmake b/Modules/TestForANSIForScope.cmake
index 7d2aad6..272e4ec 100644
--- a/Modules/TestForANSIForScope.cmake
+++ b/Modules/TestForANSIForScope.cmake
@@ -1,18 +1,19 @@
 # Distributed under the OSI-approved BSD 3-Clause License.  See accompanying
 # file Copyright.txt or https://cmake.org/licensing for details.
 
-#.rst:
-# TestForANSIForScope
-# -------------------
-#
-# Check for ANSI for scope support
-#
-# Check if the compiler restricts the scope of variables declared in a
-# for-init-statement to the loop body.
-#
-# ::
-#
-#   CMAKE_NO_ANSI_FOR_SCOPE - holds result
+#[=======================================================================[.rst:
+TestForANSIForScope
+-------------------
+
+Check for ANSI for scope support
+
+Check if the compiler restricts the scope of variables declared in a
+for-init-statement to the loop body.
+
+::
+
+  CMAKE_NO_ANSI_FOR_SCOPE - holds result
+#]=======================================================================]
 
 if(NOT DEFINED CMAKE_ANSI_FOR_SCOPE)
   message(STATUS "Check for ANSI scope")
diff --git a/Modules/TestForANSIStreamHeaders.cmake b/Modules/TestForANSIStreamHeaders.cmake
index e890c67..e532a71 100644
--- a/Modules/TestForANSIStreamHeaders.cmake
+++ b/Modules/TestForANSIStreamHeaders.cmake
@@ -1,18 +1,19 @@
 # Distributed under the OSI-approved BSD 3-Clause License.  See accompanying
 # file Copyright.txt or https://cmake.org/licensing for details.
 
-#.rst:
-# TestForANSIStreamHeaders
-# ------------------------
-#
-# Test for compiler support of ANSI stream headers iostream, etc.
-#
-# check if the compiler supports the standard ANSI iostream header
-# (without the .h)
-#
-# ::
-#
-#   CMAKE_NO_ANSI_STREAM_HEADERS - defined by the results
+#[=======================================================================[.rst:
+TestForANSIStreamHeaders
+------------------------
+
+Test for compiler support of ANSI stream headers iostream, etc.
+
+check if the compiler supports the standard ANSI iostream header
+(without the .h)
+
+::
+
+  CMAKE_NO_ANSI_STREAM_HEADERS - defined by the results
+#]=======================================================================]
 
 include(${CMAKE_CURRENT_LIST_DIR}/CheckIncludeFileCXX.cmake)
 
diff --git a/Modules/TestForSSTREAM.cmake b/Modules/TestForSSTREAM.cmake
index 0bfbfbb..e70df00 100644
--- a/Modules/TestForSSTREAM.cmake
+++ b/Modules/TestForSSTREAM.cmake
@@ -1,17 +1,18 @@
 # Distributed under the OSI-approved BSD 3-Clause License.  See accompanying
 # file Copyright.txt or https://cmake.org/licensing for details.
 
-#.rst:
-# TestForSSTREAM
-# --------------
-#
-# Test for compiler support of ANSI sstream header
-#
-# check if the compiler supports the standard ANSI sstream header
-#
-# ::
-#
-#   CMAKE_NO_ANSI_STRING_STREAM - defined by the results
+#[=======================================================================[.rst:
+TestForSSTREAM
+--------------
+
+Test for compiler support of ANSI sstream header
+
+check if the compiler supports the standard ANSI sstream header
+
+::
+
+  CMAKE_NO_ANSI_STRING_STREAM - defined by the results
+#]=======================================================================]
 
 if(NOT DEFINED CMAKE_HAS_ANSI_STRING_STREAM)
   message(STATUS "Check for sstream")
diff --git a/Modules/TestForSTDNamespace.cmake b/Modules/TestForSTDNamespace.cmake
index 3ae80c7..703e631 100644
--- a/Modules/TestForSTDNamespace.cmake
+++ b/Modules/TestForSTDNamespace.cmake
@@ -1,17 +1,18 @@
 # Distributed under the OSI-approved BSD 3-Clause License.  See accompanying
 # file Copyright.txt or https://cmake.org/licensing for details.
 
-#.rst:
-# TestForSTDNamespace
-# -------------------
-#
-# Test for std:: namespace support
-#
-# check if the compiler supports std:: on stl classes
-#
-# ::
-#
-#   CMAKE_NO_STD_NAMESPACE - defined by the results
+#[=======================================================================[.rst:
+TestForSTDNamespace
+-------------------
+
+Test for std:: namespace support
+
+check if the compiler supports std:: on stl classes
+
+::
+
+  CMAKE_NO_STD_NAMESPACE - defined by the results
+#]=======================================================================]
 
 if(NOT DEFINED CMAKE_STD_NAMESPACE)
   message(STATUS "Check for STD namespace")
diff --git a/Modules/UseEcos.cmake b/Modules/UseEcos.cmake
index 700bfe6..6d13d42 100644
--- a/Modules/UseEcos.cmake
+++ b/Modules/UseEcos.cmake
@@ -1,32 +1,33 @@
 # Distributed under the OSI-approved BSD 3-Clause License.  See accompanying
 # file Copyright.txt or https://cmake.org/licensing for details.
 
-#.rst:
-# UseEcos
-# -------
-#
-# This module defines variables and macros required to build eCos application.
-#
-# This file contains the following macros:
-# ECOS_ADD_INCLUDE_DIRECTORIES() - add the eCos include dirs
-# ECOS_ADD_EXECUTABLE(name source1 ...  sourceN ) - create an eCos
-# executable ECOS_ADJUST_DIRECTORY(VAR source1 ...  sourceN ) - adjusts
-# the path of the source files and puts the result into VAR
-#
-# Macros for selecting the toolchain: ECOS_USE_ARM_ELF_TOOLS() - enable
-# the ARM ELF toolchain for the directory where it is called
-# ECOS_USE_I386_ELF_TOOLS() - enable the i386 ELF toolchain for the
-# directory where it is called ECOS_USE_PPC_EABI_TOOLS() - enable the
-# PowerPC toolchain for the directory where it is called
-#
-# It contains the following variables: ECOS_DEFINITIONS
-# ECOSCONFIG_EXECUTABLE ECOS_CONFIG_FILE - defaults to ecos.ecc, if your
-# eCos configuration file has a different name, adjust this variable for
-# internal use only:
-#
-# ::
-#
-#   ECOS_ADD_TARGET_LIB
+#[=======================================================================[.rst:
+UseEcos
+-------
+
+This module defines variables and macros required to build eCos application.
+
+This file contains the following macros:
+ECOS_ADD_INCLUDE_DIRECTORIES() - add the eCos include dirs
+ECOS_ADD_EXECUTABLE(name source1 ...  sourceN ) - create an eCos
+executable ECOS_ADJUST_DIRECTORY(VAR source1 ...  sourceN ) - adjusts
+the path of the source files and puts the result into VAR
+
+Macros for selecting the toolchain: ECOS_USE_ARM_ELF_TOOLS() - enable
+the ARM ELF toolchain for the directory where it is called
+ECOS_USE_I386_ELF_TOOLS() - enable the i386 ELF toolchain for the
+directory where it is called ECOS_USE_PPC_EABI_TOOLS() - enable the
+PowerPC toolchain for the directory where it is called
+
+It contains the following variables: ECOS_DEFINITIONS
+ECOSCONFIG_EXECUTABLE ECOS_CONFIG_FILE - defaults to ecos.ecc, if your
+eCos configuration file has a different name, adjust this variable for
+internal use only:
+
+::
+
+  ECOS_ADD_TARGET_LIB
+#]=======================================================================]
 
 # first check that ecosconfig is available
 find_program(ECOSCONFIG_EXECUTABLE NAMES ecosconfig)
diff --git a/Modules/UseJava.cmake b/Modules/UseJava.cmake
index 6e2c511..68c9a27 100644
--- a/Modules/UseJava.cmake
+++ b/Modules/UseJava.cmake
@@ -1,438 +1,439 @@
 # Distributed under the OSI-approved BSD 3-Clause License.  See accompanying
 # file Copyright.txt or https://cmake.org/licensing for details.
 
-#.rst:
-# UseJava
-# -------
-#
-# Use Module for Java
-#
-# This file provides functions for Java.  It is assumed that
-# FindJava.cmake has already been loaded.  See FindJava.cmake for
-# information on how to load Java into your CMake project.
-#
-# ::
-#
-#  add_jar(target_name
-#          [SOURCES] source1 [source2 ...] [resource1 ...]
-#          [INCLUDE_JARS jar1 [jar2 ...]]
-#          [ENTRY_POINT entry]
-#          [VERSION version]
-#          [OUTPUT_NAME name]
-#          [OUTPUT_DIR dir]
-#          [GENERATE_NATIVE_HEADERS target [DESTINATION dir]]
-#          )
-#
-# This command creates a <target_name>.jar.  It compiles the given
-# source files (source) and adds the given resource files (resource) to
-# the jar file.  Source files can be java files or listing files
-# (prefixed by '@').  If only resource files are given then just a jar file
-# is created.  The list of include jars are added to the classpath when
-# compiling the java sources and also to the dependencies of the target.
-# INCLUDE_JARS also accepts other target names created by add_jar.  For
-# backwards compatibility, jar files listed as sources are ignored (as
-# they have been since the first version of this module).
-#
-# The default OUTPUT_DIR can also be changed by setting the variable
-# CMAKE_JAVA_TARGET_OUTPUT_DIR.
-#
-# Optionally, using option GENERATE_NATIVE_HEADERS, native header files can be generated
-# for methods declared as native. These files provide the connective glue that allow your
-# Java and C code to interact. An INTERFACE target will be created for an easy usage
-# of generated files. Sub-option DESTINATION can be used to specify output directory for
-# generated header files.
-#
-# GENERATE_NATIVE_HEADERS option requires, at least, version 1.8 of the JDK.
-#
-# Additional instructions:
-#
-# ::
-#
-#    To add compile flags to the target you can set these flags with
-#    the following variable:
-#
-#
-#
-# ::
-#
-#        set(CMAKE_JAVA_COMPILE_FLAGS -nowarn)
-#
-#
-#
-# ::
-#
-#    To add a path or a jar file to the class path you can do this
-#    with the CMAKE_JAVA_INCLUDE_PATH variable.
-#
-#
-#
-# ::
-#
-#        set(CMAKE_JAVA_INCLUDE_PATH /usr/share/java/shibboleet.jar)
-#
-#
-#
-# ::
-#
-#    To use a different output name for the target you can set it with:
-#
-#
-#
-# ::
-#
-#        add_jar(foobar foobar.java OUTPUT_NAME shibboleet.jar)
-#
-#
-#
-# ::
-#
-#    To use a different output directory than CMAKE_CURRENT_BINARY_DIR
-#    you can set it with:
-#
-#
-#
-# ::
-#
-#        add_jar(foobar foobar.java OUTPUT_DIR ${PROJECT_BINARY_DIR}/bin)
-#
-#
-#
-# ::
-#
-#    To define an entry point in your jar you can set it with the ENTRY_POINT
-#    named argument:
-#
-#
-#
-# ::
-#
-#        add_jar(example ENTRY_POINT com/examples/MyProject/Main)
-#
-#
-#
-# ::
-#
-#    To define a custom manifest for the jar, you can set it with the manifest
-#    named argument:
-#
-#
-#
-# ::
-#
-#        add_jar(example MANIFEST /path/to/manifest)
-#
-#
-#
-# ::
-#
-#    To add a VERSION to the target output name you can set it using
-#    the VERSION named argument to add_jar. This will create a jar file with the
-#    name shibboleet-1.0.0.jar and will create a symlink shibboleet.jar
-#    pointing to the jar with the version information.
-#
-#
-#
-# ::
-#
-#        add_jar(shibboleet shibbotleet.java VERSION 1.2.0)
-#
-#
-#
-# ::
-#
-#     If the target is a JNI library, utilize the following commands to
-#     create a JNI symbolic link:
-#
-#
-#
-# ::
-#
-#        set(CMAKE_JNI_TARGET TRUE)
-#        add_jar(shibboleet shibbotleet.java VERSION 1.2.0)
-#        install_jar(shibboleet ${LIB_INSTALL_DIR}/shibboleet)
-#        install_jni_symlink(shibboleet ${JAVA_LIB_INSTALL_DIR})
-#
-#
-#
-# ::
-#
-#     If a single target needs to produce more than one jar from its
-#     java source code, to prevent the accumulation of duplicate class
-#     files in subsequent jars, set/reset CMAKE_JAR_CLASSES_PREFIX prior
-#     to calling the add_jar() function:
-#
-#
-#
-# ::
-#
-#        set(CMAKE_JAR_CLASSES_PREFIX com/redhat/foo)
-#        add_jar(foo foo.java)
-#
-#
-#
-# ::
-#
-#        set(CMAKE_JAR_CLASSES_PREFIX com/redhat/bar)
-#        add_jar(bar bar.java)
-#
-#
-#
-# ::
-#
-#     For an optimum usage of option GENERATE_NATIVE_HEADERS, it is recommended to
-#     include module JNI before any call to add_jar. The produced target for native
-#     headers can then be used to compile C/C++ sources with command
-#     target_link_libraries.
-#
-#
-# ::
-#
-#        find_package(JNI)
-#        add_jar(foo foo.java GENERATE_NATIVE_HEADERS foo-native)
-#        add_library(bar bar.cpp)
-#        target_link_libraries(bar PRIVATE foo-native)
-#
-#
-# Target Properties:
-#
-# ::
-#
-#    The add_jar() function sets some target properties. You can get these
-#    properties with the
-#       get_property(TARGET <target_name> PROPERTY <propery_name>)
-#    command.
-#
-#
-#
-# ::
-#
-#    INSTALL_FILES      The files which should be installed. This is used by
-#                       install_jar().
-#    JNI_SYMLINK        The JNI symlink which should be installed.
-#                       This is used by install_jni_symlink().
-#    JAR_FILE           The location of the jar file so that you can include
-#                       it.
-#    CLASSDIR           The directory where the class files can be found. For
-#                       example to use them with javah.
-#
-# ::
-#
-#  find_jar(<VAR>
-#           name | NAMES name1 [name2 ...]
-#           [PATHS path1 [path2 ... ENV var]]
-#           [VERSIONS version1 [version2]]
-#           [DOC "cache documentation string"]
-#           )
-#
-# This command is used to find a full path to the named jar.  A cache
-# entry named by <VAR> is created to stor the result of this command.
-# If the full path to a jar is found the result is stored in the
-# variable and the search will not repeated unless the variable is
-# cleared.  If nothing is found, the result will be <VAR>-NOTFOUND, and
-# the search will be attempted again next time find_jar is invoked with
-# the same variable.  The name of the full path to a file that is
-# searched for is specified by the names listed after NAMES argument.
-# Additional search locations can be specified after the PATHS argument.
-# If you require special a version of a jar file you can specify it with
-# the VERSIONS argument.  The argument after DOC will be used for the
-# documentation string in the cache.
-#
-# ::
-#
-#  install_jar(target_name destination)
-#  install_jar(target_name DESTINATION destination [COMPONENT component])
-#
-# This command installs the TARGET_NAME files to the given DESTINATION.
-# It should be called in the same scope as add_jar() or it will fail.
-#
-# Target Properties:
-#
-# ::
-#
-#    The install_jar() function sets the INSTALL_DESTINATION target property
-#    on jars so installed. This property holds the DESTINATION as described
-#    above, and is used by install_jar_exports(). You can get this property
-#    with the
-#       get_property(TARGET <target_name> PROPERTY INSTALL_DESTINATION)
-#    command.
-#
-#
-#
-# ::
-#
-#  install_jni_symlink(target_name destination)
-#  install_jni_symlink(target_name DESTINATION destination [COMPONENT component])
-#
-# This command installs the TARGET_NAME JNI symlinks to the given
-# DESTINATION.  It should be called in the same scope as add_jar() or it
-# will fail.
-#
-# ::
-#
-#  install_jar_exports(TARGETS jars...
-#                      [NAMESPACE <namespace>]
-#                      FILE <filename>
-#                      DESTINATION <dir> [COMPONENT <component>])
-#
-# This command installs a target export file ``<filename>`` for the named jar
-# targets to the given ``DESTINATION``. Its function is similar to that of
-# :command:`install(EXPORTS ...)`.
-#
-# ::
-#
-#  export_jars(TARGETS jars...
-#              [NAMESPACE <namespace>]
-#              FILE <filename>)
-#
-# This command writes a target export file ``<filename>`` for the named jar
-# targets. Its function is similar to that of :command:`export(...)`.
-#
-# ::
-#
-#  create_javadoc(<VAR>
-#                 PACKAGES pkg1 [pkg2 ...]
-#                 [SOURCEPATH <sourcepath>]
-#                 [CLASSPATH <classpath>]
-#                 [INSTALLPATH <install path>]
-#                 [DOCTITLE "the documentation title"]
-#                 [WINDOWTITLE "the title of the document"]
-#                 [AUTHOR TRUE|FALSE]
-#                 [USE TRUE|FALSE]
-#                 [VERSION TRUE|FALSE]
-#                 )
-#
-# Create java documentation based on files or packages.  For more
-# details please read the javadoc manpage.
-#
-# There are two main signatures for create_javadoc.  The first signature
-# works with package names on a path with source files:
-#
-# ::
-#
-#    Example:
-#    create_javadoc(my_example_doc
-#      PACKAGES com.example.foo com.example.bar
-#      SOURCEPATH "${CMAKE_CURRENT_SOURCE_DIR}"
-#      CLASSPATH ${CMAKE_JAVA_INCLUDE_PATH}
-#      WINDOWTITLE "My example"
-#      DOCTITLE "<h1>My example</h1>"
-#      AUTHOR TRUE
-#      USE TRUE
-#      VERSION TRUE
-#    )
-#
-#
-#
-# The second signature for create_javadoc works on a given list of
-# files.
-#
-# ::
-#
-#    create_javadoc(<VAR>
-#                   FILES file1 [file2 ...]
-#                   [CLASSPATH <classpath>]
-#                   [INSTALLPATH <install path>]
-#                   [DOCTITLE "the documentation title"]
-#                   [WINDOWTITLE "the title of the document"]
-#                   [AUTHOR TRUE|FALSE]
-#                   [USE TRUE|FALSE]
-#                   [VERSION TRUE|FALSE]
-#                  )
-#
-#
-#
-# Example:
-#
-# ::
-#
-#    create_javadoc(my_example_doc
-#      FILES ${example_SRCS}
-#      CLASSPATH ${CMAKE_JAVA_INCLUDE_PATH}
-#      WINDOWTITLE "My example"
-#      DOCTITLE "<h1>My example</h1>"
-#      AUTHOR TRUE
-#      USE TRUE
-#      VERSION TRUE
-#    )
-#
-#
-#
-# Both signatures share most of the options.  These options are the same
-# as what you can find in the javadoc manpage.  Please look at the
-# manpage for CLASSPATH, DOCTITLE, WINDOWTITLE, AUTHOR, USE and VERSION.
-#
-# The documentation will be by default installed to
-#
-# ::
-#
-#    ${CMAKE_INSTALL_PREFIX}/share/javadoc/<VAR>
-#
-#
-#
-# if you don't set the INSTALLPATH.
-#
-# ::
-#
-#  create_javah(TARGET <target>
-#               GENERATED_FILES <VAR>
-#               CLASSES <class>...
-#               [CLASSPATH <classpath>...]
-#               [DEPENDS <depend>...]
-#               [OUTPUT_NAME <path>|OUTPUT_DIR <path>]
-#               )
-#
-# Create C header files from java classes. These files provide the connective glue
-# that allow your Java and C code to interact.
-#
-# This command will no longer be supported starting with version 10 of the JDK due
-# to the `suppression of javah tool <http://openjdk.java.net/jeps/313>`_.
-# Command ``add_jar(GENERATE_NATIVE_HEADERS)`` must be used instead.
-#
-# There are two main signatures for create_javah.  The first signature
-# returns generated files through variable specified by GENERATED_FILES option:
-#
-# ::
-#
-#    Example:
-#    Create_javah(GENERATED_FILES files_headers
-#      CLASSES org.cmake.HelloWorld
-#      CLASSPATH hello.jar
-#    )
-#
-#
-#
-# The second signature for create_javah creates a target which encapsulates
-# header files generation.
-#
-# ::
-#
-#    Example:
-#    Create_javah(TARGET target_headers
-#      CLASSES org.cmake.HelloWorld
-#      CLASSPATH hello.jar
-#    )
-#
-#
-#
-# Both signatures share same options.
-#
-#  ``CLASSES <class>...``
-#    Specifies Java classes used to generate headers.
-#
-#  ``CLASSPATH <classpath>...``
-#    Specifies various paths to look up classes. Here .class files, jar files or targets
-#    created by command add_jar can be used.
-#
-#  ``DEPENDS <depend>...``
-#    Targets on which the javah target depends
-#
-#  ``OUTPUT_NAME <path>``
-#    Concatenates the resulting header files for all the classes listed by option CLASSES
-#    into <path>. Same behavior as option '-o' of javah tool.
-#
-#  ``OUTPUT_DIR <path>``
-#    Sets the directory where the header files will be generated. Same behavior as option
-#    '-d' of javah tool. If not specified, ${CMAKE_CURRENT_BINARY_DIR} is used as output directory.
+#[=======================================================================[.rst:
+UseJava
+-------
+
+Use Module for Java
+
+This file provides functions for Java.  It is assumed that
+FindJava.cmake has already been loaded.  See FindJava.cmake for
+information on how to load Java into your CMake project.
+
+::
+
+ add_jar(target_name
+         [SOURCES] source1 [source2 ...] [resource1 ...]
+         [INCLUDE_JARS jar1 [jar2 ...]]
+         [ENTRY_POINT entry]
+         [VERSION version]
+         [OUTPUT_NAME name]
+         [OUTPUT_DIR dir]
+         [GENERATE_NATIVE_HEADERS target [DESTINATION dir]]
+         )
+
+This command creates a <target_name>.jar.  It compiles the given
+source files (source) and adds the given resource files (resource) to
+the jar file.  Source files can be java files or listing files
+(prefixed by '@').  If only resource files are given then just a jar file
+is created.  The list of include jars are added to the classpath when
+compiling the java sources and also to the dependencies of the target.
+INCLUDE_JARS also accepts other target names created by add_jar.  For
+backwards compatibility, jar files listed as sources are ignored (as
+they have been since the first version of this module).
+
+The default OUTPUT_DIR can also be changed by setting the variable
+CMAKE_JAVA_TARGET_OUTPUT_DIR.
+
+Optionally, using option GENERATE_NATIVE_HEADERS, native header files can be generated
+for methods declared as native. These files provide the connective glue that allow your
+Java and C code to interact. An INTERFACE target will be created for an easy usage
+of generated files. Sub-option DESTINATION can be used to specify output directory for
+generated header files.
+
+GENERATE_NATIVE_HEADERS option requires, at least, version 1.8 of the JDK.
+
+Additional instructions:
+
+::
+
+   To add compile flags to the target you can set these flags with
+   the following variable:
+
+
+
+::
+
+       set(CMAKE_JAVA_COMPILE_FLAGS -nowarn)
+
+
+
+::
+
+   To add a path or a jar file to the class path you can do this
+   with the CMAKE_JAVA_INCLUDE_PATH variable.
+
+
+
+::
+
+       set(CMAKE_JAVA_INCLUDE_PATH /usr/share/java/shibboleet.jar)
+
+
+
+::
+
+   To use a different output name for the target you can set it with:
+
+
+
+::
+
+       add_jar(foobar foobar.java OUTPUT_NAME shibboleet.jar)
+
+
+
+::
+
+   To use a different output directory than CMAKE_CURRENT_BINARY_DIR
+   you can set it with:
+
+
+
+::
+
+       add_jar(foobar foobar.java OUTPUT_DIR ${PROJECT_BINARY_DIR}/bin)
+
+
+
+::
+
+   To define an entry point in your jar you can set it with the ENTRY_POINT
+   named argument:
+
+
+
+::
+
+       add_jar(example ENTRY_POINT com/examples/MyProject/Main)
+
+
+
+::
+
+   To define a custom manifest for the jar, you can set it with the manifest
+   named argument:
+
+
+
+::
+
+       add_jar(example MANIFEST /path/to/manifest)
+
+
+
+::
+
+   To add a VERSION to the target output name you can set it using
+   the VERSION named argument to add_jar. This will create a jar file with the
+   name shibboleet-1.0.0.jar and will create a symlink shibboleet.jar
+   pointing to the jar with the version information.
+
+
+
+::
+
+       add_jar(shibboleet shibbotleet.java VERSION 1.2.0)
+
+
+
+::
+
+    If the target is a JNI library, utilize the following commands to
+    create a JNI symbolic link:
+
+
+
+::
+
+       set(CMAKE_JNI_TARGET TRUE)
+       add_jar(shibboleet shibbotleet.java VERSION 1.2.0)
+       install_jar(shibboleet ${LIB_INSTALL_DIR}/shibboleet)
+       install_jni_symlink(shibboleet ${JAVA_LIB_INSTALL_DIR})
+
+
+
+::
+
+    If a single target needs to produce more than one jar from its
+    java source code, to prevent the accumulation of duplicate class
+    files in subsequent jars, set/reset CMAKE_JAR_CLASSES_PREFIX prior
+    to calling the add_jar() function:
+
+
+
+::
+
+       set(CMAKE_JAR_CLASSES_PREFIX com/redhat/foo)
+       add_jar(foo foo.java)
+
+
+
+::
+
+       set(CMAKE_JAR_CLASSES_PREFIX com/redhat/bar)
+       add_jar(bar bar.java)
+
+
+
+::
+
+    For an optimum usage of option GENERATE_NATIVE_HEADERS, it is recommended to
+    include module JNI before any call to add_jar. The produced target for native
+    headers can then be used to compile C/C++ sources with command
+    target_link_libraries.
+
+
+::
+
+       find_package(JNI)
+       add_jar(foo foo.java GENERATE_NATIVE_HEADERS foo-native)
+       add_library(bar bar.cpp)
+       target_link_libraries(bar PRIVATE foo-native)
+
+
+Target Properties:
+
+::
+
+   The add_jar() function sets some target properties. You can get these
+   properties with the
+      get_property(TARGET <target_name> PROPERTY <propery_name>)
+   command.
+
+
+
+::
+
+   INSTALL_FILES      The files which should be installed. This is used by
+                      install_jar().
+   JNI_SYMLINK        The JNI symlink which should be installed.
+                      This is used by install_jni_symlink().
+   JAR_FILE           The location of the jar file so that you can include
+                      it.
+   CLASSDIR           The directory where the class files can be found. For
+                      example to use them with javah.
+
+::
+
+ find_jar(<VAR>
+          name | NAMES name1 [name2 ...]
+          [PATHS path1 [path2 ... ENV var]]
+          [VERSIONS version1 [version2]]
+          [DOC "cache documentation string"]
+          )
+
+This command is used to find a full path to the named jar.  A cache
+entry named by <VAR> is created to stor the result of this command.
+If the full path to a jar is found the result is stored in the
+variable and the search will not repeated unless the variable is
+cleared.  If nothing is found, the result will be <VAR>-NOTFOUND, and
+the search will be attempted again next time find_jar is invoked with
+the same variable.  The name of the full path to a file that is
+searched for is specified by the names listed after NAMES argument.
+Additional search locations can be specified after the PATHS argument.
+If you require special a version of a jar file you can specify it with
+the VERSIONS argument.  The argument after DOC will be used for the
+documentation string in the cache.
+
+::
+
+ install_jar(target_name destination)
+ install_jar(target_name DESTINATION destination [COMPONENT component])
+
+This command installs the TARGET_NAME files to the given DESTINATION.
+It should be called in the same scope as add_jar() or it will fail.
+
+Target Properties:
+
+::
+
+   The install_jar() function sets the INSTALL_DESTINATION target property
+   on jars so installed. This property holds the DESTINATION as described
+   above, and is used by install_jar_exports(). You can get this property
+   with the
+      get_property(TARGET <target_name> PROPERTY INSTALL_DESTINATION)
+   command.
+
+
+
+::
+
+ install_jni_symlink(target_name destination)
+ install_jni_symlink(target_name DESTINATION destination [COMPONENT component])
+
+This command installs the TARGET_NAME JNI symlinks to the given
+DESTINATION.  It should be called in the same scope as add_jar() or it
+will fail.
+
+::
+
+ install_jar_exports(TARGETS jars...
+                     [NAMESPACE <namespace>]
+                     FILE <filename>
+                     DESTINATION <dir> [COMPONENT <component>])
+
+This command installs a target export file ``<filename>`` for the named jar
+targets to the given ``DESTINATION``. Its function is similar to that of
+:command:`install(EXPORTS ...)`.
+
+::
+
+ export_jars(TARGETS jars...
+             [NAMESPACE <namespace>]
+             FILE <filename>)
+
+This command writes a target export file ``<filename>`` for the named jar
+targets. Its function is similar to that of :command:`export(...)`.
+
+::
+
+ create_javadoc(<VAR>
+                PACKAGES pkg1 [pkg2 ...]
+                [SOURCEPATH <sourcepath>]
+                [CLASSPATH <classpath>]
+                [INSTALLPATH <install path>]
+                [DOCTITLE "the documentation title"]
+                [WINDOWTITLE "the title of the document"]
+                [AUTHOR TRUE|FALSE]
+                [USE TRUE|FALSE]
+                [VERSION TRUE|FALSE]
+                )
+
+Create java documentation based on files or packages.  For more
+details please read the javadoc manpage.
+
+There are two main signatures for create_javadoc.  The first signature
+works with package names on a path with source files:
+
+::
+
+   Example:
+   create_javadoc(my_example_doc
+     PACKAGES com.example.foo com.example.bar
+     SOURCEPATH "${CMAKE_CURRENT_SOURCE_DIR}"
+     CLASSPATH ${CMAKE_JAVA_INCLUDE_PATH}
+     WINDOWTITLE "My example"
+     DOCTITLE "<h1>My example</h1>"
+     AUTHOR TRUE
+     USE TRUE
+     VERSION TRUE
+   )
+
+
+
+The second signature for create_javadoc works on a given list of
+files.
+
+::
+
+   create_javadoc(<VAR>
+                  FILES file1 [file2 ...]
+                  [CLASSPATH <classpath>]
+                  [INSTALLPATH <install path>]
+                  [DOCTITLE "the documentation title"]
+                  [WINDOWTITLE "the title of the document"]
+                  [AUTHOR TRUE|FALSE]
+                  [USE TRUE|FALSE]
+                  [VERSION TRUE|FALSE]
+                 )
+
+
+
+Example:
+
+::
+
+   create_javadoc(my_example_doc
+     FILES ${example_SRCS}
+     CLASSPATH ${CMAKE_JAVA_INCLUDE_PATH}
+     WINDOWTITLE "My example"
+     DOCTITLE "<h1>My example</h1>"
+     AUTHOR TRUE
+     USE TRUE
+     VERSION TRUE
+   )
+
+
+
+Both signatures share most of the options.  These options are the same
+as what you can find in the javadoc manpage.  Please look at the
+manpage for CLASSPATH, DOCTITLE, WINDOWTITLE, AUTHOR, USE and VERSION.
+
+The documentation will be by default installed to
+
+::
+
+   ${CMAKE_INSTALL_PREFIX}/share/javadoc/<VAR>
+
+
+
+if you don't set the INSTALLPATH.
+
+::
+
+ create_javah(TARGET <target>
+              GENERATED_FILES <VAR>
+              CLASSES <class>...
+              [CLASSPATH <classpath>...]
+              [DEPENDS <depend>...]
+              [OUTPUT_NAME <path>|OUTPUT_DIR <path>]
+              )
+
+Create C header files from java classes. These files provide the connective glue
+that allow your Java and C code to interact.
+
+This command will no longer be supported starting with version 10 of the JDK due
+to the `suppression of javah tool <http://openjdk.java.net/jeps/313>`_.
+Command ``add_jar(GENERATE_NATIVE_HEADERS)`` must be used instead.
+
+There are two main signatures for create_javah.  The first signature
+returns generated files through variable specified by GENERATED_FILES option:
+
+::
+
+   Example:
+   Create_javah(GENERATED_FILES files_headers
+     CLASSES org.cmake.HelloWorld
+     CLASSPATH hello.jar
+   )
+
+
+
+The second signature for create_javah creates a target which encapsulates
+header files generation.
+
+::
+
+   Example:
+   Create_javah(TARGET target_headers
+     CLASSES org.cmake.HelloWorld
+     CLASSPATH hello.jar
+   )
+
+
+
+Both signatures share same options.
+
+ ``CLASSES <class>...``
+   Specifies Java classes used to generate headers.
+
+ ``CLASSPATH <classpath>...``
+   Specifies various paths to look up classes. Here .class files, jar files or targets
+   created by command add_jar can be used.
+
+ ``DEPENDS <depend>...``
+   Targets on which the javah target depends
+
+ ``OUTPUT_NAME <path>``
+   Concatenates the resulting header files for all the classes listed by option CLASSES
+   into <path>. Same behavior as option '-o' of javah tool.
+
+ ``OUTPUT_DIR <path>``
+   Sets the directory where the header files will be generated. Same behavior as option
+   '-d' of javah tool. If not specified, ${CMAKE_CURRENT_BINARY_DIR} is used as output directory.
+#]=======================================================================]
 
 function (__java_copy_file src dest comment)
     add_custom_command(
diff --git a/Modules/UseJavaClassFilelist.cmake b/Modules/UseJavaClassFilelist.cmake
index c2f9afa..1c4baa9 100644
--- a/Modules/UseJavaClassFilelist.cmake
+++ b/Modules/UseJavaClassFilelist.cmake
@@ -1,17 +1,18 @@
 # Distributed under the OSI-approved BSD 3-Clause License.  See accompanying
 # file Copyright.txt or https://cmake.org/licensing for details.
 
-#.rst:
-# UseJavaClassFilelist
-# --------------------
-#
-#
-#
-#
-#
-# This script create a list of compiled Java class files to be added to
-# a jar file.  This avoids including cmake files which get created in
-# the binary directory.
+#[=======================================================================[.rst:
+UseJavaClassFilelist
+--------------------
+
+
+
+
+
+This script create a list of compiled Java class files to be added to
+a jar file.  This avoids including cmake files which get created in
+the binary directory.
+#]=======================================================================]
 
 if (CMAKE_JAVA_CLASS_OUTPUT_PATH)
     if (EXISTS "${CMAKE_JAVA_CLASS_OUTPUT_PATH}")
diff --git a/Modules/UseJavaSymlinks.cmake b/Modules/UseJavaSymlinks.cmake
index 358b9ef..3969f54 100644
--- a/Modules/UseJavaSymlinks.cmake
+++ b/Modules/UseJavaSymlinks.cmake
@@ -1,15 +1,16 @@
 # Distributed under the OSI-approved BSD 3-Clause License.  See accompanying
 # file Copyright.txt or https://cmake.org/licensing for details.
 
-#.rst:
-# UseJavaSymlinks
-# ---------------
-#
-#
-#
-#
-#
-# Helper script for UseJava.cmake
+#[=======================================================================[.rst:
+UseJavaSymlinks
+---------------
+
+
+
+
+
+Helper script for UseJava.cmake
+#]=======================================================================]
 
 if (UNIX AND _JAVA_TARGET_OUTPUT_LINK)
     if (_JAVA_TARGET_OUTPUT_NAME)
diff --git a/Modules/UsePkgConfig.cmake b/Modules/UsePkgConfig.cmake
index 28618eb..32d228d 100644
--- a/Modules/UsePkgConfig.cmake
+++ b/Modules/UsePkgConfig.cmake
@@ -1,24 +1,25 @@
 # Distributed under the OSI-approved BSD 3-Clause License.  See accompanying
 # file Copyright.txt or https://cmake.org/licensing for details.
 
-#.rst:
-# UsePkgConfig
-# ------------
-#
-# Obsolete pkg-config module for CMake, use FindPkgConfig instead.
-#
-#
-#
-# This module defines the following macro:
-#
-# PKGCONFIG(package includedir libdir linkflags cflags)
-#
-# Calling PKGCONFIG will fill the desired information into the 4 given
-# arguments, e.g.  PKGCONFIG(libart-2.0 LIBART_INCLUDE_DIR
-# LIBART_LINK_DIR LIBART_LINK_FLAGS LIBART_CFLAGS) if pkg-config was NOT
-# found or the specified software package doesn't exist, the variable
-# will be empty when the function returns, otherwise they will contain
-# the respective information
+#[=======================================================================[.rst:
+UsePkgConfig
+------------
+
+Obsolete pkg-config module for CMake, use FindPkgConfig instead.
+
+
+
+This module defines the following macro:
+
+PKGCONFIG(package includedir libdir linkflags cflags)
+
+Calling PKGCONFIG will fill the desired information into the 4 given
+arguments, e.g.  PKGCONFIG(libart-2.0 LIBART_INCLUDE_DIR
+LIBART_LINK_DIR LIBART_LINK_FLAGS LIBART_CFLAGS) if pkg-config was NOT
+found or the specified software package doesn't exist, the variable
+will be empty when the function returns, otherwise they will contain
+the respective information
+#]=======================================================================]
 
 find_program(PKGCONFIG_EXECUTABLE NAMES pkg-config )
 
diff --git a/Modules/UseQt4.cmake b/Modules/UseQt4.cmake
index c8eab77..dc2348e 100644
--- a/Modules/UseQt4.cmake
+++ b/Modules/UseQt4.cmake
@@ -1,15 +1,16 @@
 # Distributed under the OSI-approved BSD 3-Clause License.  See accompanying
 # file Copyright.txt or https://cmake.org/licensing for details.
 
-#.rst:
-# UseQt4
-# ------
-#
-# Use Module for QT4
-#
-# Sets up C and C++ to use Qt 4.  It is assumed that FindQt.cmake has
-# already been loaded.  See FindQt.cmake for information on how to load
-# Qt 4 into your CMake project.
+#[=======================================================================[.rst:
+UseQt4
+------
+
+Use Module for QT4
+
+Sets up C and C++ to use Qt 4.  It is assumed that FindQt.cmake has
+already been loaded.  See FindQt.cmake for information on how to load
+Qt 4 into your CMake project.
+#]=======================================================================]
 
 add_definitions(${QT_DEFINITIONS})
 set_property(DIRECTORY APPEND PROPERTY COMPILE_DEFINITIONS $<$<NOT:$<CONFIG:Debug>>:QT_NO_DEBUG>)
diff --git a/Modules/Use_wxWindows.cmake b/Modules/Use_wxWindows.cmake
index 7cdd92e..f25ae89 100644
--- a/Modules/Use_wxWindows.cmake
+++ b/Modules/Use_wxWindows.cmake
@@ -1,36 +1,37 @@
 # Distributed under the OSI-approved BSD 3-Clause License.  See accompanying
 # file Copyright.txt or https://cmake.org/licensing for details.
 
-#.rst:
-# Use_wxWindows
-# -------------
-#
-# Deprecated.  Use ``find_package(wxWidgets)`` and
-# ``include(${wxWidgets_USE_FILE})`` instead.
-#
-#
-# This convenience include finds if wxWindows is installed and set the
-# appropriate libs, incdirs, flags etc.  author Jan Woetzel <jw -at-
-# mip.informatik.uni-kiel.de> (07/2003)
-#
-# USAGE:
-#
-# ::
-#
-#    just include Use_wxWindows.cmake
-#    in your projects CMakeLists.txt
-#
-# include( ${CMAKE_MODULE_PATH}/Use_wxWindows.cmake)
-#
-# ::
-#
-#    if you are sure you need GL then
-#
-# set(WXWINDOWS_USE_GL 1)
-#
-# ::
-#
-#    *before* you include this file.
+#[=======================================================================[.rst:
+Use_wxWindows
+-------------
+
+Deprecated.  Use ``find_package(wxWidgets)`` and
+``include(${wxWidgets_USE_FILE})`` instead.
+
+
+This convenience include finds if wxWindows is installed and set the
+appropriate libs, incdirs, flags etc.  author Jan Woetzel <jw -at-
+mip.informatik.uni-kiel.de> (07/2003)
+
+USAGE:
+
+::
+
+   just include Use_wxWindows.cmake
+   in your projects CMakeLists.txt
+
+include( ${CMAKE_MODULE_PATH}/Use_wxWindows.cmake)
+
+::
+
+   if you are sure you need GL then
+
+set(WXWINDOWS_USE_GL 1)
+
+::
+
+   *before* you include this file.
+#]=======================================================================]
 
 # -----------------------------------------------------
 # 16.Feb.2004: changed INCLUDE to FIND_PACKAGE to read from users own non-system CMAKE_MODULE_PATH (Jan Woetzel JW)
diff --git a/Modules/UsewxWidgets.cmake b/Modules/UsewxWidgets.cmake
index a50d03d..eed0410 100644
--- a/Modules/UsewxWidgets.cmake
+++ b/Modules/UsewxWidgets.cmake
@@ -1,41 +1,42 @@
 # Distributed under the OSI-approved BSD 3-Clause License.  See accompanying
 # file Copyright.txt or https://cmake.org/licensing for details.
 
-#.rst:
-# UsewxWidgets
-# ------------
-#
-# Convenience include for using wxWidgets library.
-#
-# Determines if wxWidgets was FOUND and sets the appropriate libs,
-# incdirs, flags, etc.  INCLUDE_DIRECTORIES and LINK_DIRECTORIES are
-# called.
-#
-# USAGE
-#
-# ::
-#
-#   # Note that for MinGW users the order of libs is important!
-#   find_package(wxWidgets REQUIRED net gl core base)
-#   include(${wxWidgets_USE_FILE})
-#   # and for each of your dependent executable/library targets:
-#   target_link_libraries(<YourTarget> ${wxWidgets_LIBRARIES})
-#
-#
-#
-# DEPRECATED
-#
-# ::
-#
-#   LINK_LIBRARIES is not called in favor of adding dependencies per target.
-#
-#
-#
-# AUTHOR
-#
-# ::
-#
-#   Jan Woetzel <jw -at- mip.informatik.uni-kiel.de>
+#[=======================================================================[.rst:
+UsewxWidgets
+------------
+
+Convenience include for using wxWidgets library.
+
+Determines if wxWidgets was FOUND and sets the appropriate libs,
+incdirs, flags, etc.  INCLUDE_DIRECTORIES and LINK_DIRECTORIES are
+called.
+
+USAGE
+
+::
+
+  # Note that for MinGW users the order of libs is important!
+  find_package(wxWidgets REQUIRED net gl core base)
+  include(${wxWidgets_USE_FILE})
+  # and for each of your dependent executable/library targets:
+  target_link_libraries(<YourTarget> ${wxWidgets_LIBRARIES})
+
+
+
+DEPRECATED
+
+::
+
+  LINK_LIBRARIES is not called in favor of adding dependencies per target.
+
+
+
+AUTHOR
+
+::
+
+  Jan Woetzel <jw -at- mip.informatik.uni-kiel.de>
+#]=======================================================================]
 
 # debug message and logging.
 # comment these out for distribution
diff --git a/Modules/WriteBasicConfigVersionFile.cmake b/Modules/WriteBasicConfigVersionFile.cmake
index 2f7c80a..0ccb6b2 100644
--- a/Modules/WriteBasicConfigVersionFile.cmake
+++ b/Modules/WriteBasicConfigVersionFile.cmake
@@ -1,22 +1,23 @@
 # Distributed under the OSI-approved BSD 3-Clause License.  See accompanying
 # file Copyright.txt or https://cmake.org/licensing for details.
 
-#.rst:
-# WriteBasicConfigVersionFile
-# ---------------------------
-#
-#
-#
-# ::
-#
-#   WRITE_BASIC_CONFIG_VERSION_FILE( filename
-#     [VERSION major.minor.patch]
-#     COMPATIBILITY (AnyNewerVersion|SameMajorVersion|SameMinorVersion|ExactVersion)
-#     )
-#
-#
-#
-# Deprecated, see WRITE_BASIC_PACKAGE_VERSION_FILE(), it is identical.
+#[=======================================================================[.rst:
+WriteBasicConfigVersionFile
+---------------------------
+
+
+
+::
+
+  WRITE_BASIC_CONFIG_VERSION_FILE( filename
+    [VERSION major.minor.patch]
+    COMPATIBILITY (AnyNewerVersion|SameMajorVersion|SameMinorVersion|ExactVersion)
+    )
+
+
+
+Deprecated, see WRITE_BASIC_PACKAGE_VERSION_FILE(), it is identical.
+#]=======================================================================]
 
 function(WRITE_BASIC_CONFIG_VERSION_FILE _filename)
 
diff --git a/Modules/WriteCompilerDetectionHeader.cmake b/Modules/WriteCompilerDetectionHeader.cmake
index 3718e9d..a556567 100644
--- a/Modules/WriteCompilerDetectionHeader.cmake
+++ b/Modules/WriteCompilerDetectionHeader.cmake
@@ -1,236 +1,237 @@
 # Distributed under the OSI-approved BSD 3-Clause License.  See accompanying
 # file Copyright.txt or https://cmake.org/licensing for details.
 
-#.rst:
-# WriteCompilerDetectionHeader
-# ----------------------------
-#
-# This module provides the function write_compiler_detection_header().
-#
-# The ``WRITE_COMPILER_DETECTION_HEADER`` function can be used to generate
-# a file suitable for preprocessor inclusion which contains macros to be
-# used in source code::
-#
-#    write_compiler_detection_header(
-#              FILE <file>
-#              PREFIX <prefix>
-#              [OUTPUT_FILES_VAR <output_files_var> OUTPUT_DIR <output_dir>]
-#              COMPILERS <compiler> [...]
-#              FEATURES <feature> [...]
-#              [BARE_FEATURES <feature> [...]]
-#              [VERSION <version>]
-#              [PROLOG <prolog>]
-#              [EPILOG <epilog>]
-#              [ALLOW_UNKNOWN_COMPILERS]
-#              [ALLOW_UNKNOWN_COMPILER_VERSIONS]
-#    )
-#
-# The ``write_compiler_detection_header`` function generates the
-# file ``<file>`` with macros which all have the prefix ``<prefix>``.
-#
-# By default, all content is written directly to the ``<file>``.  The
-# ``OUTPUT_FILES_VAR`` may be specified to cause the compiler-specific
-# content to be written to separate files.  The separate files are then
-# available in the ``<output_files_var>`` and may be consumed by the caller
-# for installation for example.  The ``OUTPUT_DIR`` specifies a relative
-# path from the main ``<file>`` to the compiler-specific files. For example:
-#
-# .. code-block:: cmake
-#
-#    write_compiler_detection_header(
-#      FILE climbingstats_compiler_detection.h
-#      PREFIX ClimbingStats
-#      OUTPUT_FILES_VAR support_files
-#      OUTPUT_DIR compilers
-#      COMPILERS GNU Clang MSVC Intel
-#      FEATURES cxx_variadic_templates
-#    )
-#    install(FILES
-#      ${CMAKE_CURRENT_BINARY_DIR}/climbingstats_compiler_detection.h
-#      DESTINATION include
-#    )
-#    install(FILES
-#      ${support_files}
-#      DESTINATION include/compilers
-#    )
-#
-#
-# ``VERSION`` may be used to specify the API version to be generated.
-# Future versions of CMake may introduce alternative APIs.  A given
-# API is selected by any ``<version>`` value greater than or equal
-# to the version of CMake that introduced the given API and less
-# than the version of CMake that introduced its succeeding API.
-# The value of the :variable:`CMAKE_MINIMUM_REQUIRED_VERSION`
-# variable is used if no explicit version is specified.
-# (As of CMake version |release| there is only one API version.)
-#
-# ``PROLOG`` may be specified as text content to write at the start of the
-# header. ``EPILOG`` may be specified as text content to write at the end
-# of the header
-#
-# At least one ``<compiler>`` and one ``<feature>`` must be listed.  Compilers
-# which are known to CMake, but not specified are detected and a preprocessor
-# ``#error`` is generated for them.  A preprocessor macro matching
-# ``<PREFIX>_COMPILER_IS_<compiler>`` is generated for each compiler
-# known to CMake to contain the value ``0`` or ``1``.
-#
-# Possible compiler identifiers are documented with the
-# :variable:`CMAKE_<LANG>_COMPILER_ID` variable.
-# Available features in this version of CMake are listed in the
-# :prop_gbl:`CMAKE_C_KNOWN_FEATURES` and
-# :prop_gbl:`CMAKE_CXX_KNOWN_FEATURES` global properties.
-# The ``{c,cxx}_std_*`` meta-features are ignored if requested.
-#
-# See the :manual:`cmake-compile-features(7)` manual for information on
-# compile features.
-#
-# ``BARE_FEATURES`` will define the compatibility macros with the name used in
-# newer versions of the language standard, so the code can use the new feature
-# name unconditionally.
-#
-# ``ALLOW_UNKNOWN_COMPILERS`` and ``ALLOW_UNKNOWN_COMPILER_VERSIONS`` cause
-# the module to generate conditions that treat unknown compilers as simply
-# lacking all features.  Without these options the default behavior is to
-# generate a ``#error`` for unknown compilers and versions.
-#
-# Feature Test Macros
-# ===================
-#
-# For each compiler, a preprocessor macro is generated matching
-# ``<PREFIX>_COMPILER_IS_<compiler>`` which has the content either ``0``
-# or ``1``, depending on the compiler in use. Preprocessor macros for
-# compiler version components are generated matching
-# ``<PREFIX>_COMPILER_VERSION_MAJOR`` ``<PREFIX>_COMPILER_VERSION_MINOR``
-# and ``<PREFIX>_COMPILER_VERSION_PATCH`` containing decimal values
-# for the corresponding compiler version components, if defined.
-#
-# A preprocessor test is generated based on the compiler version
-# denoting whether each feature is enabled.  A preprocessor macro
-# matching ``<PREFIX>_COMPILER_<FEATURE>``, where ``<FEATURE>`` is the
-# upper-case ``<feature>`` name, is generated to contain the value
-# ``0`` or ``1`` depending on whether the compiler in use supports the
-# feature:
-#
-# .. code-block:: cmake
-#
-#    write_compiler_detection_header(
-#      FILE climbingstats_compiler_detection.h
-#      PREFIX ClimbingStats
-#      COMPILERS GNU Clang AppleClang MSVC Intel
-#      FEATURES cxx_variadic_templates
-#    )
-#
-# .. code-block:: c++
-#
-#    #if ClimbingStats_COMPILER_CXX_VARIADIC_TEMPLATES
-#    template<typename... T>
-#    void someInterface(T t...) { /* ... */ }
-#    #else
-#    // Compatibility versions
-#    template<typename T1>
-#    void someInterface(T1 t1) { /* ... */ }
-#    template<typename T1, typename T2>
-#    void someInterface(T1 t1, T2 t2) { /* ... */ }
-#    template<typename T1, typename T2, typename T3>
-#    void someInterface(T1 t1, T2 t2, T3 t3) { /* ... */ }
-#    #endif
-#
-# Symbol Macros
-# =============
-#
-# Some additional symbol-defines are created for particular features for
-# use as symbols which may be conditionally defined empty:
-#
-# .. code-block:: c++
-#
-#    class MyClass ClimbingStats_FINAL
-#    {
-#        ClimbingStats_CONSTEXPR int someInterface() { return 42; }
-#    };
-#
-# The ``ClimbingStats_FINAL`` macro will expand to ``final`` if the
-# compiler (and its flags) support the ``cxx_final`` feature, and the
-# ``ClimbingStats_CONSTEXPR`` macro will expand to ``constexpr``
-# if ``cxx_constexpr`` is supported.
-#
-# If ``BARE_FEATURES cxx_final`` was given as argument the ``final`` keyword
-# will be defined for old compilers, too.
-#
-# The following features generate corresponding symbol defines and if they
-# are available as ``BARE_FEATURES``:
-#
-# ========================== =================================== ================= ======
-#         Feature                          Define                      Symbol       bare
-# ========================== =================================== ================= ======
-# ``c_restrict``              ``<PREFIX>_RESTRICT``               ``restrict``      yes
-# ``cxx_constexpr``           ``<PREFIX>_CONSTEXPR``              ``constexpr``     yes
-# ``cxx_deleted_functions``   ``<PREFIX>_DELETED_FUNCTION``       ``= delete``
-# ``cxx_extern_templates``    ``<PREFIX>_EXTERN_TEMPLATE``        ``extern``
-# ``cxx_final``               ``<PREFIX>_FINAL``                  ``final``         yes
-# ``cxx_noexcept``            ``<PREFIX>_NOEXCEPT``               ``noexcept``      yes
-# ``cxx_noexcept``            ``<PREFIX>_NOEXCEPT_EXPR(X)``       ``noexcept(X)``
-# ``cxx_override``            ``<PREFIX>_OVERRIDE``               ``override``      yes
-# ========================== =================================== ================= ======
-#
-# Compatibility Implementation Macros
-# ===================================
-#
-# Some features are suitable for wrapping in a macro with a backward
-# compatibility implementation if the compiler does not support the feature.
-#
-# When the ``cxx_static_assert`` feature is not provided by the compiler,
-# a compatibility implementation is available via the
-# ``<PREFIX>_STATIC_ASSERT(COND)`` and
-# ``<PREFIX>_STATIC_ASSERT_MSG(COND, MSG)`` function-like macros. The macros
-# expand to ``static_assert`` where that compiler feature is available, and
-# to a compatibility implementation otherwise. In the first form, the
-# condition is stringified in the message field of ``static_assert``.  In
-# the second form, the message ``MSG`` is passed to the message field of
-# ``static_assert``, or ignored if using the backward compatibility
-# implementation.
-#
-# The ``cxx_attribute_deprecated`` feature provides a macro definition
-# ``<PREFIX>_DEPRECATED``, which expands to either the standard
-# ``[[deprecated]]`` attribute or a compiler-specific decorator such
-# as ``__attribute__((__deprecated__))`` used by GNU compilers.
-#
-# The ``cxx_alignas`` feature provides a macro definition
-# ``<PREFIX>_ALIGNAS`` which expands to either the standard ``alignas``
-# decorator or a compiler-specific decorator such as
-# ``__attribute__ ((__aligned__))`` used by GNU compilers.
-#
-# The ``cxx_alignof`` feature provides a macro definition
-# ``<PREFIX>_ALIGNOF`` which expands to either the standard ``alignof``
-# decorator or a compiler-specific decorator such as ``__alignof__``
-# used by GNU compilers.
-#
-# ============================= ================================ ===================== ======
-#           Feature                          Define                     Symbol          bare
-# ============================= ================================ ===================== ======
-# ``cxx_alignas``                ``<PREFIX>_ALIGNAS``             ``alignas``
-# ``cxx_alignof``                ``<PREFIX>_ALIGNOF``             ``alignof``
-# ``cxx_nullptr``                ``<PREFIX>_NULLPTR``             ``nullptr``           yes
-# ``cxx_static_assert``          ``<PREFIX>_STATIC_ASSERT``       ``static_assert``
-# ``cxx_static_assert``          ``<PREFIX>_STATIC_ASSERT_MSG``   ``static_assert``
-# ``cxx_attribute_deprecated``   ``<PREFIX>_DEPRECATED``          ``[[deprecated]]``
-# ``cxx_attribute_deprecated``   ``<PREFIX>_DEPRECATED_MSG``      ``[[deprecated]]``
-# ``cxx_thread_local``           ``<PREFIX>_THREAD_LOCAL``        ``thread_local``
-# ============================= ================================ ===================== ======
-#
-# A use-case which arises with such deprecation macros is the deprecation
-# of an entire library.  In that case, all public API in the library may
-# be decorated with the ``<PREFIX>_DEPRECATED`` macro.  This results in
-# very noisy build output when building the library itself, so the macro
-# may be may be defined to empty in that case when building the deprecated
-# library:
-#
-# .. code-block:: cmake
-#
-#   add_library(compat_support ${srcs})
-#   target_compile_definitions(compat_support
-#     PRIVATE
-#       CompatSupport_DEPRECATED=
-#   )
+#[=======================================================================[.rst:
+WriteCompilerDetectionHeader
+----------------------------
+
+This module provides the function write_compiler_detection_header().
+
+The ``WRITE_COMPILER_DETECTION_HEADER`` function can be used to generate
+a file suitable for preprocessor inclusion which contains macros to be
+used in source code::
+
+   write_compiler_detection_header(
+             FILE <file>
+             PREFIX <prefix>
+             [OUTPUT_FILES_VAR <output_files_var> OUTPUT_DIR <output_dir>]
+             COMPILERS <compiler> [...]
+             FEATURES <feature> [...]
+             [BARE_FEATURES <feature> [...]]
+             [VERSION <version>]
+             [PROLOG <prolog>]
+             [EPILOG <epilog>]
+             [ALLOW_UNKNOWN_COMPILERS]
+             [ALLOW_UNKNOWN_COMPILER_VERSIONS]
+   )
+
+The ``write_compiler_detection_header`` function generates the
+file ``<file>`` with macros which all have the prefix ``<prefix>``.
+
+By default, all content is written directly to the ``<file>``.  The
+``OUTPUT_FILES_VAR`` may be specified to cause the compiler-specific
+content to be written to separate files.  The separate files are then
+available in the ``<output_files_var>`` and may be consumed by the caller
+for installation for example.  The ``OUTPUT_DIR`` specifies a relative
+path from the main ``<file>`` to the compiler-specific files. For example:
+
+.. code-block:: cmake
+
+   write_compiler_detection_header(
+     FILE climbingstats_compiler_detection.h
+     PREFIX ClimbingStats
+     OUTPUT_FILES_VAR support_files
+     OUTPUT_DIR compilers
+     COMPILERS GNU Clang MSVC Intel
+     FEATURES cxx_variadic_templates
+   )
+   install(FILES
+     ${CMAKE_CURRENT_BINARY_DIR}/climbingstats_compiler_detection.h
+     DESTINATION include
+   )
+   install(FILES
+     ${support_files}
+     DESTINATION include/compilers
+   )
+
+
+``VERSION`` may be used to specify the API version to be generated.
+Future versions of CMake may introduce alternative APIs.  A given
+API is selected by any ``<version>`` value greater than or equal
+to the version of CMake that introduced the given API and less
+than the version of CMake that introduced its succeeding API.
+The value of the :variable:`CMAKE_MINIMUM_REQUIRED_VERSION`
+variable is used if no explicit version is specified.
+(As of CMake version |release| there is only one API version.)
+
+``PROLOG`` may be specified as text content to write at the start of the
+header. ``EPILOG`` may be specified as text content to write at the end
+of the header
+
+At least one ``<compiler>`` and one ``<feature>`` must be listed.  Compilers
+which are known to CMake, but not specified are detected and a preprocessor
+``#error`` is generated for them.  A preprocessor macro matching
+``<PREFIX>_COMPILER_IS_<compiler>`` is generated for each compiler
+known to CMake to contain the value ``0`` or ``1``.
+
+Possible compiler identifiers are documented with the
+:variable:`CMAKE_<LANG>_COMPILER_ID` variable.
+Available features in this version of CMake are listed in the
+:prop_gbl:`CMAKE_C_KNOWN_FEATURES` and
+:prop_gbl:`CMAKE_CXX_KNOWN_FEATURES` global properties.
+The ``{c,cxx}_std_*`` meta-features are ignored if requested.
+
+See the :manual:`cmake-compile-features(7)` manual for information on
+compile features.
+
+``BARE_FEATURES`` will define the compatibility macros with the name used in
+newer versions of the language standard, so the code can use the new feature
+name unconditionally.
+
+``ALLOW_UNKNOWN_COMPILERS`` and ``ALLOW_UNKNOWN_COMPILER_VERSIONS`` cause
+the module to generate conditions that treat unknown compilers as simply
+lacking all features.  Without these options the default behavior is to
+generate a ``#error`` for unknown compilers and versions.
+
+Feature Test Macros
+===================
+
+For each compiler, a preprocessor macro is generated matching
+``<PREFIX>_COMPILER_IS_<compiler>`` which has the content either ``0``
+or ``1``, depending on the compiler in use. Preprocessor macros for
+compiler version components are generated matching
+``<PREFIX>_COMPILER_VERSION_MAJOR`` ``<PREFIX>_COMPILER_VERSION_MINOR``
+and ``<PREFIX>_COMPILER_VERSION_PATCH`` containing decimal values
+for the corresponding compiler version components, if defined.
+
+A preprocessor test is generated based on the compiler version
+denoting whether each feature is enabled.  A preprocessor macro
+matching ``<PREFIX>_COMPILER_<FEATURE>``, where ``<FEATURE>`` is the
+upper-case ``<feature>`` name, is generated to contain the value
+``0`` or ``1`` depending on whether the compiler in use supports the
+feature:
+
+.. code-block:: cmake
+
+   write_compiler_detection_header(
+     FILE climbingstats_compiler_detection.h
+     PREFIX ClimbingStats
+     COMPILERS GNU Clang AppleClang MSVC Intel
+     FEATURES cxx_variadic_templates
+   )
+
+.. code-block:: c++
+
+   #if ClimbingStats_COMPILER_CXX_VARIADIC_TEMPLATES
+   template<typename... T>
+   void someInterface(T t...) { /* ... */ }
+   #else
+   // Compatibility versions
+   template<typename T1>
+   void someInterface(T1 t1) { /* ... */ }
+   template<typename T1, typename T2>
+   void someInterface(T1 t1, T2 t2) { /* ... */ }
+   template<typename T1, typename T2, typename T3>
+   void someInterface(T1 t1, T2 t2, T3 t3) { /* ... */ }
+   #endif
+
+Symbol Macros
+=============
+
+Some additional symbol-defines are created for particular features for
+use as symbols which may be conditionally defined empty:
+
+.. code-block:: c++
+
+   class MyClass ClimbingStats_FINAL
+   {
+       ClimbingStats_CONSTEXPR int someInterface() { return 42; }
+   };
+
+The ``ClimbingStats_FINAL`` macro will expand to ``final`` if the
+compiler (and its flags) support the ``cxx_final`` feature, and the
+``ClimbingStats_CONSTEXPR`` macro will expand to ``constexpr``
+if ``cxx_constexpr`` is supported.
+
+If ``BARE_FEATURES cxx_final`` was given as argument the ``final`` keyword
+will be defined for old compilers, too.
+
+The following features generate corresponding symbol defines and if they
+are available as ``BARE_FEATURES``:
+
+========================== =================================== ================= ======
+        Feature                          Define                      Symbol       bare
+========================== =================================== ================= ======
+``c_restrict``              ``<PREFIX>_RESTRICT``               ``restrict``      yes
+``cxx_constexpr``           ``<PREFIX>_CONSTEXPR``              ``constexpr``     yes
+``cxx_deleted_functions``   ``<PREFIX>_DELETED_FUNCTION``       ``= delete``
+``cxx_extern_templates``    ``<PREFIX>_EXTERN_TEMPLATE``        ``extern``
+``cxx_final``               ``<PREFIX>_FINAL``                  ``final``         yes
+``cxx_noexcept``            ``<PREFIX>_NOEXCEPT``               ``noexcept``      yes
+``cxx_noexcept``            ``<PREFIX>_NOEXCEPT_EXPR(X)``       ``noexcept(X)``
+``cxx_override``            ``<PREFIX>_OVERRIDE``               ``override``      yes
+========================== =================================== ================= ======
+
+Compatibility Implementation Macros
+===================================
+
+Some features are suitable for wrapping in a macro with a backward
+compatibility implementation if the compiler does not support the feature.
+
+When the ``cxx_static_assert`` feature is not provided by the compiler,
+a compatibility implementation is available via the
+``<PREFIX>_STATIC_ASSERT(COND)`` and
+``<PREFIX>_STATIC_ASSERT_MSG(COND, MSG)`` function-like macros. The macros
+expand to ``static_assert`` where that compiler feature is available, and
+to a compatibility implementation otherwise. In the first form, the
+condition is stringified in the message field of ``static_assert``.  In
+the second form, the message ``MSG`` is passed to the message field of
+``static_assert``, or ignored if using the backward compatibility
+implementation.
+
+The ``cxx_attribute_deprecated`` feature provides a macro definition
+``<PREFIX>_DEPRECATED``, which expands to either the standard
+``[[deprecated]]`` attribute or a compiler-specific decorator such
+as ``__attribute__((__deprecated__))`` used by GNU compilers.
+
+The ``cxx_alignas`` feature provides a macro definition
+``<PREFIX>_ALIGNAS`` which expands to either the standard ``alignas``
+decorator or a compiler-specific decorator such as
+``__attribute__ ((__aligned__))`` used by GNU compilers.
+
+The ``cxx_alignof`` feature provides a macro definition
+``<PREFIX>_ALIGNOF`` which expands to either the standard ``alignof``
+decorator or a compiler-specific decorator such as ``__alignof__``
+used by GNU compilers.
+
+============================= ================================ ===================== ======
+          Feature                          Define                     Symbol          bare
+============================= ================================ ===================== ======
+``cxx_alignas``                ``<PREFIX>_ALIGNAS``             ``alignas``
+``cxx_alignof``                ``<PREFIX>_ALIGNOF``             ``alignof``
+``cxx_nullptr``                ``<PREFIX>_NULLPTR``             ``nullptr``           yes
+``cxx_static_assert``          ``<PREFIX>_STATIC_ASSERT``       ``static_assert``
+``cxx_static_assert``          ``<PREFIX>_STATIC_ASSERT_MSG``   ``static_assert``
+``cxx_attribute_deprecated``   ``<PREFIX>_DEPRECATED``          ``[[deprecated]]``
+``cxx_attribute_deprecated``   ``<PREFIX>_DEPRECATED_MSG``      ``[[deprecated]]``
+``cxx_thread_local``           ``<PREFIX>_THREAD_LOCAL``        ``thread_local``
+============================= ================================ ===================== ======
+
+A use-case which arises with such deprecation macros is the deprecation
+of an entire library.  In that case, all public API in the library may
+be decorated with the ``<PREFIX>_DEPRECATED`` macro.  This results in
+very noisy build output when building the library itself, so the macro
+may be may be defined to empty in that case when building the deprecated
+library:
+
+.. code-block:: cmake
+
+  add_library(compat_support ${srcs})
+  target_compile_definitions(compat_support
+    PRIVATE
+      CompatSupport_DEPRECATED=
+  )
+#]=======================================================================]
 
 include(${CMAKE_CURRENT_LIST_DIR}/CMakeCompilerIdDetection.cmake)