Initial import

5 files changed, 920 insertions, 0 deletions

diff --git a/Source/CTest/Curl/curl/curl.h b/Source/CTest/Curl/curl/curl.h
new file mode 100644
index 0000000..b6bc3a6
--- /dev/null
+++ b/Source/CTest/Curl/curl/curl.h
@@ -0,0 +1,705 @@
+#ifndef __CURL_CURL_H
+#define __CURL_CURL_H
+/*****************************************************************************
+ *                                  _   _ ____  _     
+ *  Project                     ___| | | |  _ \| |    
+ *                             / __| | | | |_) | |    
+ *                            | (__| |_| |  _ <| |___ 
+ *                             \___|\___/|_| \_\_____|
+ *
+ * Copyright (C) 2002, Daniel Stenberg, <daniel@haxx.se>, et al.
+ *
+ * In order to be useful for every potential user, curl and libcurl are
+ * dual-licensed under the MPL and the MIT/X-derivate licenses.
+ *
+ * You may opt to use, copy, modify, merge, publish, distribute and/or sell
+ * copies of the Software, and permit persons to whom the Software is
+ * furnished to do so, under the terms of the MPL or the MIT/X-derivate
+ * licenses. You may pick one of these licenses.
+ *
+ * This software is distributed on an "AS IS" basis, WITHOUT WARRANTY OF ANY
+ * KIND, either express or implied.
+ *
+ * $Id$
+ *****************************************************************************/
+
+#include <stdio.h>
+/* The include stuff here is mainly for time_t! */
+#ifdef vms
+# include <types.h>
+# include <time.h>
+#else
+# include <sys/types.h>
+# ifdef TIME_WITH_SYS_TIME
+#  include <sys/time.h>
+#  include <time.h>
+# else
+#  ifdef HAVE_SYS_TIME_H
+#   include <sys/time.h>
+#  else
+#   include <time.h>
+#  endif
+# endif
+#endif /* defined (vms) */
+
+#ifndef TRUE
+#define TRUE 1
+#endif
+#ifndef FALSE
+#define FALSE 0
+#endif
+
+#include <curl/types.h>
+
+#ifdef  __cplusplus
+extern "C" {
+#endif
+
+struct HttpPost {
+  struct HttpPost *next; /* next entry in the list */
+  char *name;     /* pointer to allocated name */
+  long namelength; /* length of name length */
+  char *contents; /* pointer to allocated data contents */
+  long contentslength; /* length of contents field */
+  char *contenttype; /* Content-Type */
+  struct curl_slist* contentheader; /* list of extra headers for this form */
+  struct HttpPost *more; /* if one field name has more than one file, this
+                            link should link to following files */
+  long flags;     /* as defined below */
+#define HTTPPOST_FILENAME (1<<0) /* specified content is a file name */
+#define HTTPPOST_READFILE (1<<1) /* specified content is a file name */
+#define HTTPPOST_PTRNAME (1<<2) /* name is only stored pointer
+                                   do not free in formfree */
+#define HTTPPOST_PTRCONTENTS (1<<3) /* contents is only stored pointer
+                                       do not free in formfree */
+};
+
+typedef int (*curl_progress_callback)(void *clientp,
+                                      double dltotal,
+                                      double dlnow,
+                                      double ultotal,
+                                      double ulnow);
+
+typedef size_t (*curl_write_callback)(char *buffer,
+                                      size_t size,
+                                      size_t nitems,
+                                      void *outstream);
+
+typedef size_t (*curl_read_callback)(char *buffer,
+                                     size_t size,
+                                     size_t nitems,
+                                     void *instream);
+
+typedef int (*curl_passwd_callback)(void *clientp,
+                                    const char *prompt,
+                                    char *buffer,
+                                    int buflen);
+
+/* All possible error codes from all sorts of curl functions. Future versions
+   may return other values, stay prepared.
+
+   Always add new return codes last. Never *EVER* remove any. The return
+   codes must remain the same!
+ */
+
+typedef enum {
+  CURLE_OK = 0,
+  CURLE_UNSUPPORTED_PROTOCOL,    /* 1 */
+  CURLE_FAILED_INIT,             /* 2 */
+  CURLE_URL_MALFORMAT,           /* 3 */
+  CURLE_URL_MALFORMAT_USER,      /* 4 */
+  CURLE_COULDNT_RESOLVE_PROXY,   /* 5 */
+  CURLE_COULDNT_RESOLVE_HOST,    /* 6 */
+  CURLE_COULDNT_CONNECT,         /* 7 */
+  CURLE_FTP_WEIRD_SERVER_REPLY,  /* 8 */
+  CURLE_FTP_ACCESS_DENIED,       /* 9 */
+  CURLE_FTP_USER_PASSWORD_INCORRECT, /* 10 */
+  CURLE_FTP_WEIRD_PASS_REPLY,    /* 11 */
+  CURLE_FTP_WEIRD_USER_REPLY,    /* 12 */
+  CURLE_FTP_WEIRD_PASV_REPLY,    /* 13 */
+  CURLE_FTP_WEIRD_227_FORMAT,    /* 14 */
+  CURLE_FTP_CANT_GET_HOST,       /* 15 */
+  CURLE_FTP_CANT_RECONNECT,      /* 16 */
+  CURLE_FTP_COULDNT_SET_BINARY,  /* 17 */
+  CURLE_PARTIAL_FILE,            /* 18 */
+  CURLE_FTP_COULDNT_RETR_FILE,   /* 19 */
+  CURLE_FTP_WRITE_ERROR,         /* 20 */
+  CURLE_FTP_QUOTE_ERROR,         /* 21 */
+  CURLE_HTTP_NOT_FOUND,          /* 22 */
+  CURLE_WRITE_ERROR,             /* 23 */
+  CURLE_MALFORMAT_USER,          /* 24 - user name is illegally specified */
+  CURLE_FTP_COULDNT_STOR_FILE,   /* 25 - failed FTP upload */
+  CURLE_READ_ERROR,              /* 26 - could open/read from file */
+  CURLE_OUT_OF_MEMORY,           /* 27 */
+  CURLE_OPERATION_TIMEOUTED,     /* 28 - the timeout time was reached */
+  CURLE_FTP_COULDNT_SET_ASCII,   /* 29 - TYPE A failed */
+  CURLE_FTP_PORT_FAILED,         /* 30 - FTP PORT operation failed */
+  CURLE_FTP_COULDNT_USE_REST,    /* 31 - the REST command failed */
+  CURLE_FTP_COULDNT_GET_SIZE,    /* 32 - the SIZE command failed */
+  CURLE_HTTP_RANGE_ERROR,        /* 33 - RANGE "command" didn't work */
+  CURLE_HTTP_POST_ERROR,         /* 34 */
+  CURLE_SSL_CONNECT_ERROR,       /* 35 - wrong when connecting with SSL */
+  CURLE_FTP_BAD_DOWNLOAD_RESUME, /* 36 - couldn't resume download */
+  CURLE_FILE_COULDNT_READ_FILE,  /* 37 */
+  CURLE_LDAP_CANNOT_BIND,        /* 38 */
+  CURLE_LDAP_SEARCH_FAILED,      /* 39 */
+  CURLE_LIBRARY_NOT_FOUND,       /* 40 */
+  CURLE_FUNCTION_NOT_FOUND,      /* 41 */
+  CURLE_ABORTED_BY_CALLBACK,     /* 42 */
+  CURLE_BAD_FUNCTION_ARGUMENT,   /* 43 */
+  CURLE_BAD_CALLING_ORDER,       /* 44 */
+  CURLE_HTTP_PORT_FAILED,        /* 45 - HTTP Interface operation failed */
+  CURLE_BAD_PASSWORD_ENTERED,    /* 46 - my_getpass() returns fail */
+  CURLE_TOO_MANY_REDIRECTS ,     /* 47 - catch endless re-direct loops */
+  CURLE_UNKNOWN_TELNET_OPTION,   /* 48 - User specified an unknown option */
+  CURLE_TELNET_OPTION_SYNTAX ,   /* 49 - Malformed telnet option */
+  CURLE_OBSOLETE,                /* 50 - removed after 7.7.3 */
+  CURLE_SSL_PEER_CERTIFICATE,    /* 51 - peer's certificate wasn't ok */
+  CURLE_GOT_NOTHING,             /* 52 - when this is a specific error */
+  CURLE_SSL_ENGINE_NOTFOUND,     /* 53 - SSL crypto engine not found */
+  CURLE_SSL_ENGINE_SETFAILED,    /* 54 - can not set SSL crypto engine as default */
+
+  CURL_LAST /* never use! */
+} CURLcode;
+
+/* this was the error code 50 in 7.7.3 and a few earlier versions, this
+   is no longer used by libcurl but is instead #defined here only to not
+   make programs break */
+#define CURLE_ALREADY_COMPLETE 99999
+
+/* This is just to make older programs not break: */
+#define CURLE_FTP_PARTIAL_FILE CURLE_PARTIAL_FILE
+
+#define CURL_ERROR_SIZE 256
+
+/* name is uppercase CURLOPT_<name>,
+   type is one of the defined CURLOPTTYPE_<type>
+   number is unique identifier */
+#ifdef CINIT
+#undef CINIT
+#endif
+#define CINIT(name,type,number) CURLOPT_ ## name = CURLOPTTYPE_ ## type + number
+
+/* long may be 32 or 64 bits, but we should never depend on anything else
+   but 32 */
+#define CURLOPTTYPE_LONG          0
+#define CURLOPTTYPE_OBJECTPOINT   10000
+#define CURLOPTTYPE_FUNCTIONPOINT 20000
+
+typedef enum {
+  CINIT(NOTHING, LONG, 0), /********* the first one is unused ************/
+  
+  /* This is the FILE * or void * the regular output should be written to. */
+  CINIT(FILE, OBJECTPOINT, 1),
+
+  /* The full URL to get/put */
+  CINIT(URL,  OBJECTPOINT, 2),
+
+  /* Port number to connect to, if other than default. Specify the CONF_PORT
+     flag in the CURLOPT_FLAGS to activate this */
+  CINIT(PORT, LONG, 3),
+
+  /* Name of proxy to use. Specify the CONF_PROXY flag in the CURLOPT_FLAGS to
+     activate this */
+  CINIT(PROXY, OBJECTPOINT, 4),
+  
+  /* Name and password to use when fetching. Specify the CONF_USERPWD flag in
+     the CURLOPT_FLAGS to activate this */
+  CINIT(USERPWD, OBJECTPOINT, 5),
+
+  /* Name and password to use with Proxy. Specify the CONF_PROXYUSERPWD 
+     flag in the CURLOPT_FLAGS to activate this */
+  CINIT(PROXYUSERPWD, OBJECTPOINT, 6),
+
+  /* Range to get, specified as an ASCII string. Specify the CONF_RANGE flag
+     in the CURLOPT_FLAGS to activate this */
+  CINIT(RANGE, OBJECTPOINT, 7),
+
+  /* not used */
+
+  /* Specified file stream to upload from (use as input): */
+  CINIT(INFILE, OBJECTPOINT, 9),
+
+  /* Buffer to receive error messages in, must be at least CURL_ERROR_SIZE
+   * bytes big. If this is not used, error messages go to stderr instead: */
+  CINIT(ERRORBUFFER, OBJECTPOINT, 10),
+
+  /* Function that will be called to store the output (instead of fwrite). The
+   * parameters will use fwrite() syntax, make sure to follow them. */
+  CINIT(WRITEFUNCTION, FUNCTIONPOINT, 11),
+
+  /* Function that will be called to read the input (instead of fread). The
+   * parameters will use fread() syntax, make sure to follow them. */
+  CINIT(READFUNCTION, FUNCTIONPOINT, 12),
+
+  /* Time-out the read operation after this amount of seconds */
+  CINIT(TIMEOUT, LONG, 13),
+
+  /* If the CURLOPT_INFILE is used, this can be used to inform libcurl about
+   * how large the file being sent really is. That allows better error
+   * checking and better verifies that the upload was succcessful. -1 means
+   * unknown size. */
+  CINIT(INFILESIZE, LONG, 14),
+
+  /* POST input fields. */
+  CINIT(POSTFIELDS, OBJECTPOINT, 15),
+
+  /* Set the referer page (needed by some CGIs) */
+  CINIT(REFERER, OBJECTPOINT, 16),
+
+  /* Set the FTP PORT string (interface name, named or numerical IP address)
+     Use i.e '-' to use default address. */
+  CINIT(FTPPORT, OBJECTPOINT, 17),
+
+  /* Set the User-Agent string (examined by some CGIs) */
+  CINIT(USERAGENT, OBJECTPOINT, 18),
+
+  /* If the download receives less than "low speed limit" bytes/second
+   * during "low speed time" seconds, the operations is aborted.
+   * You could i.e if you have a pretty high speed connection, abort if
+   * it is less than 2000 bytes/sec during 20 seconds.   
+   */
+
+  /* Set the "low speed limit" */
+  CINIT(LOW_SPEED_LIMIT, LONG , 19),
+
+  /* Set the "low speed time" */
+  CINIT(LOW_SPEED_TIME, LONG, 20),
+
+  /* Set the continuation offset */
+  CINIT(RESUME_FROM, LONG, 21),
+
+  /* Set cookie in request: */
+  CINIT(COOKIE, OBJECTPOINT, 22),
+
+  /* This points to a linked list of headers, struct curl_slist kind */
+  CINIT(HTTPHEADER, OBJECTPOINT, 23),
+
+  /* This points to a linked list of post entries, struct HttpPost */
+  CINIT(HTTPPOST, OBJECTPOINT, 24),
+
+  /* name of the file keeping your private SSL-certificate */
+  CINIT(SSLCERT, OBJECTPOINT, 25),
+
+  /* password for the SSL-private key, keep this for compatibility */
+  CINIT(SSLCERTPASSWD, OBJECTPOINT, 26),
+  /* password for the SSL private key */
+  CINIT(SSLKEYPASSWD, OBJECTPOINT, 26),
+  
+  /* send TYPE parameter? */
+  CINIT(CRLF, LONG, 27),
+
+  /* send linked-list of QUOTE commands */
+  CINIT(QUOTE, OBJECTPOINT, 28),
+
+  /* send FILE * or void * to store headers to, if you use a callback it
+     is simply passed to the callback unmodified */
+  CINIT(WRITEHEADER, OBJECTPOINT, 29),
+
+  /* point to a file to read the initial cookies from, also enables
+     "cookie awareness" */
+  CINIT(COOKIEFILE, OBJECTPOINT, 31),
+
+  /* What version to specifly try to use.
+     See CURL_SSLVERSION defines below. */
+  CINIT(SSLVERSION, LONG, 32),
+
+  /* What kind of HTTP time condition to use, see defines */
+  CINIT(TIMECONDITION, LONG, 33),
+
+  /* Time to use with the above condition. Specified in number of seconds
+     since 1 Jan 1970 */
+  CINIT(TIMEVALUE, LONG, 34),
+
+  /* HTTP request, for odd commands like DELETE, TRACE and others */
+  /* OBSOLETE DEFINE, left for tradition only */
+  CINIT(HTTPREQUEST, OBJECTPOINT, 35),
+
+  /* Custom request, for customizing the get command like
+     HTTP: DELETE, TRACE and others
+     FTP: to use a different list command
+     */
+  CINIT(CUSTOMREQUEST, OBJECTPOINT, 36),
+
+  /* HTTP request, for odd commands like DELETE, TRACE and others */
+  CINIT(STDERR, OBJECTPOINT, 37),
+
+  /* 38 is not used */
+
+  /* send linked-list of post-transfer QUOTE commands */
+  CINIT(POSTQUOTE, OBJECTPOINT, 39),
+
+  /* Pass a pointer to string of the output using full variable-replacement
+     as described elsewhere. */
+  CINIT(WRITEINFO, OBJECTPOINT, 40),
+
+  /* Previous FLAG bits */
+  CINIT(VERBOSE, LONG, 41),      /* talk a lot */
+  CINIT(HEADER, LONG, 42),       /* throw the header out too */
+  CINIT(NOPROGRESS, LONG, 43),   /* shut off the progress meter */
+  CINIT(NOBODY, LONG, 44),       /* use HEAD to get http document */
+  CINIT(FAILONERROR, LONG, 45),  /* no output on http error codes >= 300 */
+  CINIT(UPLOAD, LONG, 46),       /* this is an upload */
+  CINIT(POST, LONG, 47),         /* HTTP POST method */
+  CINIT(FTPLISTONLY, LONG, 48),  /* Use NLST when listing ftp dir */
+
+  CINIT(FTPAPPEND, LONG, 50),    /* Append instead of overwrite on upload! */
+  CINIT(NETRC, LONG, 51),        /* read user+password from .netrc */
+  CINIT(FOLLOWLOCATION, LONG, 52),  /* use Location: Luke! */
+
+  /* This FTPASCII name is now obsolete, to be removed, use the TRANSFERTEXT
+     instead. It goes for more protocols than just ftp... */
+  CINIT(FTPASCII, LONG, 53),     /* use TYPE A for transfer */
+
+  CINIT(TRANSFERTEXT, LONG, 53), /* transfer data in text/ASCII format */
+  CINIT(PUT, LONG, 54),          /* PUT the input file */
+
+  CINIT(MUTE, LONG, 55),         /* OBSOLETE OPTION, removed in 7.8 */
+
+  /* Function that will be called instead of the internal progress display
+   * function. This function should be defined as the curl_progress_callback
+   * prototype defines. */
+  CINIT(PROGRESSFUNCTION, FUNCTIONPOINT, 56),
+
+  /* Data passed to the progress callback */
+  CINIT(PROGRESSDATA, OBJECTPOINT, 57),
+
+  /* We want the referer field set automatically when following locations */
+  CINIT(AUTOREFERER, LONG, 58),
+
+  /* Port of the proxy, can be set in the proxy string as well with:
+     "[host]:[port]" */
+  CINIT(PROXYPORT, LONG, 59),
+
+  /* size of the POST input data, if strlen() is not good to use */
+  CINIT(POSTFIELDSIZE, LONG, 60),
+
+  /* tunnel non-http operations through a HTTP proxy */
+  CINIT(HTTPPROXYTUNNEL, LONG, 61),
+
+  /* Set the interface string to use as outgoing network interface */
+  CINIT(INTERFACE, OBJECTPOINT, 62),
+
+  /* Set the krb4 security level, this also enables krb4 awareness.  This is a
+   * string, 'clear', 'safe', 'confidential' or 'private'.  If the string is
+   * set but doesn't match one of these, 'private' will be used.  */
+  CINIT(KRB4LEVEL, OBJECTPOINT, 63),
+
+  /* Set if we should verify the peer in ssl handshake, set 1 to verify. */
+  CINIT(SSL_VERIFYPEER, LONG, 64),
+  
+  /* The CApath or CAfile used to validate the peer certificate
+     this option is used only if SSL_VERIFYPEER is true */
+  CINIT(CAINFO, OBJECTPOINT, 65),
+
+  /* Function pointer to replace the internal password prompt */
+  CINIT(PASSWDFUNCTION, FUNCTIONPOINT, 66),
+
+  /* Custom pointer that gets passed as first argument to the password
+     function */
+  CINIT(PASSWDDATA, OBJECTPOINT, 67),
+  
+  /* Maximum number of http redirects to follow */
+  CINIT(MAXREDIRS, LONG, 68),
+
+  /* Pass a pointer to a time_t to get a possible date of the requested
+     document! Pass a NULL to shut it off. */
+  CINIT(FILETIME, OBJECTPOINT, 69),
+
+  /* This points to a linked list of telnet options */
+  CINIT(TELNETOPTIONS, OBJECTPOINT, 70),
+
+  /* Max amount of cached alive connections */
+  CINIT(MAXCONNECTS, LONG, 71),
+
+  /* What policy to use when closing connections when the cache is filled
+     up */
+  CINIT(CLOSEPOLICY, LONG, 72),
+
+  /* Callback to use when CURLCLOSEPOLICY_CALLBACK is set */
+  CINIT(CLOSEFUNCTION, FUNCTIONPOINT, 73),
+
+  /* Set to explicitly use a new connection for the upcoming transfer.
+     Do not use this unless you're absolutely sure of this, as it makes the
+     operation slower and is less friendly for the network. */
+  CINIT(FRESH_CONNECT, LONG, 74),
+
+  /* Set to explicitly forbid the upcoming transfer's connection to be re-used
+     when done. Do not use this unless you're absolutely sure of this, as it
+     makes the operation slower and is less friendly for the network. */
+  CINIT(FORBID_REUSE, LONG, 75),
+
+  /* Set to a file name that contains random data for libcurl to use to
+     seed the random engine when doing SSL connects. */
+  CINIT(RANDOM_FILE, OBJECTPOINT, 76),
+
+  /* Set to the Entropy Gathering Daemon socket pathname */
+  CINIT(EGDSOCKET, OBJECTPOINT, 77),
+
+  /* Time-out connect operations after this amount of seconds, if connects
+     are OK within this time, then fine... This only aborts the connect
+     phase. [Only works on unix-style/SIGALRM operating systems] */
+  CINIT(CONNECTTIMEOUT, LONG, 78),
+
+  /* Function that will be called to store headers (instead of fwrite). The
+   * parameters will use fwrite() syntax, make sure to follow them. */
+  CINIT(HEADERFUNCTION, FUNCTIONPOINT, 79),
+
+  /* Set this to force the HTTP request to get back to GET. Only really usable
+     if POST, PUT or a custom request have been used first.
+   */
+  CINIT(HTTPGET, LONG, 80),
+
+  /* Set if we should verify the Common name from the peer certificate in ssl
+   * handshake, set 1 to check existence, 2 to ensure that it matches the
+   * provided hostname. */
+  CINIT(SSL_VERIFYHOST, LONG, 81),
+
+  /* Specify which file name to write all known cookies in after completed
+     operation. Set file name to "-" (dash) to make it go to stdout. */
+  CINIT(COOKIEJAR, OBJECTPOINT, 82),
+
+  /* Specify which SSL ciphers to use */
+  CINIT(SSL_CIPHER_LIST, OBJECTPOINT, 83),
+
+  /* Specify which HTTP version to use! This must be set to one of the
+     CURL_HTTP_VERSION* enums set below. */
+  CINIT(HTTP_VERSION, LONG, 84),
+
+  /* Specificly switch on or off the FTP engine's use of the EPSV command. By
+     default, that one will always be attempted before the more traditional
+     PASV command. */     
+  CINIT(FTP_USE_EPSV, LONG, 85),
+
+  /* type of the file keeping your SSL-certificate ("DER", "PEM", "ENG") */
+  CINIT(SSLCERTTYPE, OBJECTPOINT, 86),
+
+  /* name of the file keeping your private SSL-key */
+  CINIT(SSLKEY, OBJECTPOINT, 87),
+
+  /* type of the file keeping your private SSL-key ("DER", "PEM", "ENG") */
+  CINIT(SSLKEYTYPE, OBJECTPOINT, 88),
+
+  /* crypto engine for the SSL-sub system */
+  CINIT(SSLENGINE, OBJECTPOINT, 89),
+
+  /* set the crypto engine for the SSL-sub system as default
+     the param has no meaning...
+   */
+  CINIT(SSLENGINE_DEFAULT, LONG, 90),
+
+  /* Non-zero value means to use the global dns cache */
+  CINIT(DNS_USE_GLOBAL_CACHE, LONG, 91),
+
+  /* DNS cache timeout */
+  CINIT(DNS_CACHE_TIMEOUT, LONG, 92),
+
+  /* send linked-list of pre-transfer QUOTE commands (Wesley Laxton)*/
+  CINIT(PREQUOTE, OBJECTPOINT, 93),
+  
+  CURLOPT_LASTENTRY /* the last unusued */
+} CURLoption;
+
+  /* These enums are for use with the CURLOPT_HTTP_VERSION option. */
+enum {
+  CURL_HTTP_VERSION_NONE, /* setting this means we don't care, and that we'd
+                             like the library to choose the best possible
+                             for us! */
+  CURL_HTTP_VERSION_1_0,  /* please use HTTP 1.0 in the request */
+  CURL_HTTP_VERSION_1_1,  /* please use HTTP 1.1 in the request */
+  
+  CURL_HTTP_VERSION_LAST /* *ILLEGAL* http version */
+};
+
+enum {
+  CURL_SSLVERSION_DEFAULT,
+  CURL_SSLVERSION_TLSv1,
+  CURL_SSLVERSION_SSLv2,
+  CURL_SSLVERSION_SSLv3,
+
+  CURL_SSLVERSION_LAST /* never use, keep last */
+};
+
+
+typedef enum {
+  TIMECOND_NONE,
+
+  TIMECOND_IFMODSINCE,
+  TIMECOND_IFUNMODSINCE,
+  TIMECOND_LASTMOD,
+
+  TIMECOND_LAST
+} curl_TimeCond;
+
+#ifdef __BEOS__
+#include <support/SupportDefs.h>
+#endif
+
+
+/* These functions are in the libcurl, they're here for portable reasons and
+   they are used by the 'curl' client. They really should be moved to some kind
+   of "portability library" since it has nothing to do with file transfers and
+   might be usable to other programs...
+
+   NOTE: they return TRUE if the strings match *case insensitively*.
+ */
+extern int (curl_strequal)(const char *s1, const char *s2);
+extern int (curl_strnequal)(const char *s1, const char *s2, size_t n);
+#define strequal(a,b) curl_strequal(a,b)
+#define strnequal(a,b,c) curl_strnequal(a,b,c)
+
+/* external form function */
+int curl_formparse(char *string,
+                   struct HttpPost **httppost,
+                   struct HttpPost **last_post);
+
+/* name is uppercase CURLFORM_<name> */
+#ifdef CFINIT
+#undef CFINIT
+#endif
+#define CFINIT(name) CURLFORM_ ## name
+
+typedef enum {
+  CFINIT(NOTHING),        /********* the first one is unused ************/
+  
+  /*  */
+  CFINIT(COPYNAME),
+  CFINIT(PTRNAME),
+  CFINIT(NAMELENGTH),
+  CFINIT(COPYCONTENTS),
+  CFINIT(PTRCONTENTS),
+  CFINIT(CONTENTSLENGTH),
+  CFINIT(FILECONTENT),
+  CFINIT(ARRAY),
+  CFINIT(ARRAY_START), /* below are the options allowed within a array */
+  CFINIT(FILE),
+  CFINIT(CONTENTTYPE),
+  CFINIT(CONTENTHEADER),
+  CFINIT(END),
+  CFINIT(ARRAY_END),   /* up are the options allowed within a array */
+
+  CURLFORM_LASTENTRY /* the last unusued */
+} CURLformoption;
+
+/* structure to be used as parameter for CURLFORM_ARRAY */
+struct curl_forms {
+        CURLformoption          option;
+        const char              *value;
+};
+
+/* new external form function */
+int curl_formadd(struct HttpPost **httppost,
+                 struct HttpPost **last_post,
+                 ...);
+
+/* cleanup a form: */
+void curl_formfree(struct HttpPost *form);
+
+/* Unix and Win32 getenv function call, this returns a malloc()'ed string that
+   MUST be free()ed after usage is complete. */
+char *curl_getenv(const char *variable);
+
+/* Returns a static ascii string of the libcurl version. */
+char *curl_version(void);
+
+/* Escape and unescape URL encoding in strings. The functions return a new
+ * allocated string or NULL if an error occurred.  */
+char *curl_escape(const char *string, int length);
+char *curl_unescape(const char *string, int length);
+
+/* curl_global_init() should be invoked exactly once for each application that
+   uses libcurl */
+CURLcode curl_global_init(long flags);
+
+/* curl_global_cleanup() should be invoked exactly once for each application
+   that uses libcurl */
+void curl_global_cleanup(void);
+
+/* This is the version number */
+#define LIBCURL_VERSION "7.9.5"
+#define LIBCURL_VERSION_NUM 0x070905
+
+/* linked-list structure for the CURLOPT_QUOTE option (and other) */
+struct curl_slist {
+        char                    *data;
+        struct curl_slist       *next;
+};
+
+struct curl_slist *curl_slist_append(struct curl_slist *, const char *);
+void curl_slist_free_all(struct curl_slist *);
+
+/*
+ * NAME curl_getdate()
+ *
+ * DESCRIPTION
+ *
+ * Returns the time, in seconds since 1 Jan 1970 of the time string given in
+ * the first argument. The time argument in the second parameter is for cases
+ * where the specified time is relative now, like 'two weeks' or 'tomorrow'
+ * etc.
+ */
+time_t curl_getdate(const char *p, const time_t *now);
+
+
+#define CURLINFO_STRING   0x100000
+#define CURLINFO_LONG     0x200000
+#define CURLINFO_DOUBLE   0x300000
+#define CURLINFO_MASK     0x0fffff
+#define CURLINFO_TYPEMASK 0xf00000
+
+typedef enum {
+  CURLINFO_NONE, /* first, never use this */
+  CURLINFO_EFFECTIVE_URL    = CURLINFO_STRING + 1,
+  CURLINFO_HTTP_CODE        = CURLINFO_LONG   + 2,
+  CURLINFO_TOTAL_TIME       = CURLINFO_DOUBLE + 3,
+  CURLINFO_NAMELOOKUP_TIME  = CURLINFO_DOUBLE + 4,
+  CURLINFO_CONNECT_TIME     = CURLINFO_DOUBLE + 5,
+  CURLINFO_PRETRANSFER_TIME = CURLINFO_DOUBLE + 6,
+  CURLINFO_SIZE_UPLOAD      = CURLINFO_DOUBLE + 7,
+  CURLINFO_SIZE_DOWNLOAD    = CURLINFO_DOUBLE + 8,
+  CURLINFO_SPEED_DOWNLOAD   = CURLINFO_DOUBLE + 9,
+  CURLINFO_SPEED_UPLOAD     = CURLINFO_DOUBLE + 10,
+  CURLINFO_HEADER_SIZE      = CURLINFO_LONG   + 11,
+  CURLINFO_REQUEST_SIZE     = CURLINFO_LONG   + 12,
+  CURLINFO_SSL_VERIFYRESULT = CURLINFO_LONG   + 13,
+  CURLINFO_FILETIME         = CURLINFO_LONG   + 14,
+
+  CURLINFO_CONTENT_LENGTH_DOWNLOAD   = CURLINFO_DOUBLE + 15,
+  CURLINFO_CONTENT_LENGTH_UPLOAD     = CURLINFO_DOUBLE + 16,
+
+  CURLINFO_STARTTRANSFER_TIME = CURLINFO_DOUBLE + 17,
+
+  CURLINFO_CONTENT_TYPE = CURLINFO_STRING + 18,
+
+  /* Fill in new entries here! */
+
+  CURLINFO_LASTONE          = 19
+} CURLINFO;
+
+/* unfortunately, the easy.h include file needs the options and info stuff
+   before it can be included! */
+#include <curl/easy.h> /* nothing in curl is fun without the easy stuff */
+
+typedef enum {
+  CURLCLOSEPOLICY_NONE, /* first, never use this */
+
+  CURLCLOSEPOLICY_OLDEST,
+  CURLCLOSEPOLICY_LEAST_RECENTLY_USED,
+  CURLCLOSEPOLICY_LEAST_TRAFFIC,
+  CURLCLOSEPOLICY_SLOWEST,
+  CURLCLOSEPOLICY_CALLBACK,
+ 
+  CURLCLOSEPOLICY_LAST /* last, never use this */
+} curl_closepolicy;
+
+#define CURL_GLOBAL_SSL (1<<0)
+#define CURL_GLOBAL_WIN32 (1<<1)
+#define CURL_GLOBAL_ALL (CURL_GLOBAL_SSL|CURL_GLOBAL_WIN32)
+#define CURL_GLOBAL_NOTHING 0
+#define CURL_GLOBAL_DEFAULT CURL_GLOBAL_ALL
+
+#ifdef  __cplusplus
+}
+#endif
+
+#endif /* __CURL_CURL_H */
diff --git a/Source/CTest/Curl/curl/easy.h b/Source/CTest/Curl/curl/easy.h
new file mode 100644
index 0000000..d3545ff
--- /dev/null
+++ b/Source/CTest/Curl/curl/easy.h
@@ -0,0 +1,68 @@
+#ifndef __CURL_EASY_H
+#define __CURL_EASY_H
+/*****************************************************************************
+ *                                  _   _ ____  _     
+ *  Project                     ___| | | |  _ \| |    
+ *                             / __| | | | |_) | |    
+ *                            | (__| |_| |  _ <| |___ 
+ *                             \___|\___/|_| \_\_____|
+ *
+ * Copyright (C) 2000, Daniel Stenberg, <daniel@haxx.se>, et al.
+ *
+ * In order to be useful for every potential user, curl and libcurl are
+ * dual-licensed under the MPL and the MIT/X-derivate licenses.
+ *
+ * You may opt to use, copy, modify, merge, publish, distribute and/or sell
+ * copies of the Software, and permit persons to whom the Software is
+ * furnished to do so, under the terms of the MPL or the MIT/X-derivate
+ * licenses. You may pick one of these licenses.
+ *
+ * This software is distributed on an "AS IS" basis, WITHOUT WARRANTY OF ANY
+ * KIND, either express or implied.
+ *
+ * $Id$
+ *****************************************************************************/
+#ifdef  __cplusplus
+extern "C" {
+#endif
+
+CURL *curl_easy_init(void);
+CURLcode curl_easy_setopt(CURL *curl, CURLoption option, ...);
+CURLcode curl_easy_perform(CURL *curl);
+void curl_easy_cleanup(CURL *curl);
+
+/*
+ * NAME curl_easy_getinfo()
+ *
+ * DESCRIPTION
+ *
+ * Request internal information from the curl session with this function.  The
+ * third argument MUST be a pointer to a long, a pointer to a char * or a
+ * pointer to a double (as the documentation describes elsewhere).  The data
+ * pointed to will be filled in accordingly and can be relied upon only if the
+ * function returns CURLE_OK.  This function is intended to get used *AFTER* a
+ * performed transfer, all results from this function are undefined until the
+ * transfer is completed.
+ */
+CURLcode curl_easy_getinfo(CURL *curl, CURLINFO info, ...);
+
+
+/*
+ * NAME curl_easy_duphandle()
+ *
+ * DESCRIPTION
+ *
+ * Creates a new curl session handle with the same options set for the handle
+ * passed in. Duplicating a handle could only be a matter of cloning data and
+ * options, internal state info and things like persistant connections cannot
+ * be transfered. It is useful in multithreaded applications when you can run
+ * curl_easy_duphandle() for each new thread to avoid a series of identical
+ * curl_easy_setopt() invokes in every thread.
+ */
+CURL* curl_easy_duphandle(CURL *curl);
+
+#ifdef  __cplusplus
+}
+#endif
+
+#endif
diff --git a/Source/CTest/Curl/curl/mprintf.h b/Source/CTest/Curl/curl/mprintf.h
new file mode 100644
index 0000000..30c4d44
--- /dev/null
+++ b/Source/CTest/Curl/curl/mprintf.h
@@ -0,0 +1,83 @@
+/*************************************************************************
+ *
+ * $Id$
+ *
+ * Permission to use, copy, modify, and distribute this software for any
+ * purpose with or without fee is hereby granted, provided that the above
+ * copyright notice and this permission notice appear in all copies.
+ *
+ * THIS SOFTWARE IS PROVIDED ``AS IS'' AND WITHOUT ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, WITHOUT LIMITATION, THE IMPLIED WARRANTIES OF
+ * MERCHANTIBILITY AND FITNESS FOR A PARTICULAR PURPOSE. THE AUTHORS AND
+ * CONTRIBUTORS ACCEPT NO RESPONSIBILITY IN ANY CONCEIVABLE MANNER.
+ *
+ *************************************************************************
+ *
+ * Preliminary documentation
+ *
+ * printf conversions:
+ *
+ *  conversion ::= '%%' | '%' [position] ( number | float | string )
+ *  position ::= digits '$'
+ *  number ::= [number-flags] ( 'd' | 'i' | 'o' | 'x' | 'X' | 'u')
+ *  number-flags ::= 'h' | 'l' | 'L' ...
+ *  float ::= [float-flags] ( 'f' | 'e' | 'E' | 'g' | 'G' )
+ *  string ::= [string-flags] 's'
+ *  string-flags ::= padding | '#'
+ *  digits ::= (digit)+
+ *  digit ::= 0-9
+ *
+ *  c
+ *  p
+ *  n
+ *
+ * qualifiers
+ *
+ *  -     : left adjustment
+ *  +     : show sign
+ *  SPACE : padding
+ *  #     : alterative
+ *  .     : precision
+ *  *     : width
+ *  0     : padding / size
+ *  1-9   : size
+ *  h     : short
+ *  l     : long
+ *  ll    : longlong
+ *  L     : long double
+ *  Z     : long / longlong
+ *  q     : longlong
+ *
+ ************************************************************************/
+
+#ifndef H_MPRINTF
+#define H_MPRINTF
+
+#include <stdarg.h>
+#include <stdio.h> /* needed for FILE */
+
+int curl_mprintf(const char *format, ...);
+int curl_mfprintf(FILE *fd, const char *format, ...);
+int curl_msprintf(char *buffer, const char *format, ...);
+int curl_msnprintf(char *buffer, size_t maxlength, const char *format, ...);
+int curl_mvprintf(const char *format, va_list args);
+int curl_mvfprintf(FILE *fd, const char *format, va_list args);
+int curl_mvsprintf(char *buffer, const char *format, va_list args);
+int curl_mvsnprintf(char *buffer, size_t maxlength, const char *format, va_list args);
+char *curl_maprintf(const char *format, ...);
+char *curl_mvaprintf(const char *format, va_list args);
+
+#ifdef _MPRINTF_REPLACE
+# define printf curl_mprintf
+# define fprintf curl_mfprintf
+# define sprintf curl_msprintf
+# define snprintf curl_msnprintf
+# define vprintf curl_mvprintf
+# define vfprintf curl_mvfprintf
+# define vsprintf curl_mvsprintf
+# define vsnprintf curl_mvsnprintf
+# define aprintf curl_maprintf
+# define vaprintf curl_mvaprintf
+#endif
+
+#endif /* H_MPRINTF */
diff --git a/Source/CTest/Curl/curl/stdcheaders.h b/Source/CTest/Curl/curl/stdcheaders.h
new file mode 100644
index 0000000..3fbaaf7
--- /dev/null
+++ b/Source/CTest/Curl/curl/stdcheaders.h
@@ -0,0 +1,36 @@
+#ifndef __STDC_HEADERS_H
+#define __STDC_HEADERS_H
+/*****************************************************************************
+ *                                  _   _ ____  _     
+ *  Project                     ___| | | |  _ \| |    
+ *                             / __| | | | |_) | |    
+ *                            | (__| |_| |  _ <| |___ 
+ *                             \___|\___/|_| \_\_____|
+ *
+ * Copyright (C) 2000, Daniel Stenberg, <daniel@haxx.se>, et al.
+ *
+ * In order to be useful for every potential user, curl and libcurl are
+ * dual-licensed under the MPL and the MIT/X-derivate licenses.
+ *
+ * You may opt to use, copy, modify, merge, publish, distribute and/or sell
+ * copies of the Software, and permit persons to whom the Software is
+ * furnished to do so, under the terms of the MPL or the MIT/X-derivate
+ * licenses. You may pick one of these licenses.
+ *
+ * This software is distributed on an "AS IS" basis, WITHOUT WARRANTY OF ANY
+ * KIND, either express or implied.
+ *
+ * $Id$
+ *****************************************************************************/
+
+#ifdef HAVE_SYS_TYPES_H
+#include <sys/types.h>
+#endif
+
+size_t fread (void *, size_t, size_t, FILE *);
+size_t fwrite (const void *, size_t, size_t, FILE *);
+
+int strcasecmp(const char *, const char *);
+int strncasecmp(const char *, const char *, size_t);
+
+#endif
diff --git a/Source/CTest/Curl/curl/types.h b/Source/CTest/Curl/curl/types.h
new file mode 100644
index 0000000..05f73bf
--- /dev/null
+++ b/Source/CTest/Curl/curl/types.h
@@ -0,0 +1,28 @@
+#ifndef __CURL_TYPES_H
+#define __CURL_TYPES_H
+/*****************************************************************************
+ *                                  _   _ ____  _     
+ *  Project                     ___| | | |  _ \| |    
+ *                             / __| | | | |_) | |    
+ *                            | (__| |_| |  _ <| |___ 
+ *                             \___|\___/|_| \_\_____|
+ *
+ * Copyright (C) 2000, Daniel Stenberg, <daniel@haxx.se>, et al.
+ *
+ * In order to be useful for every potential user, curl and libcurl are
+ * dual-licensed under the MPL and the MIT/X-derivate licenses.
+ *
+ * You may opt to use, copy, modify, merge, publish, distribute and/or sell
+ * copies of the Software, and permit persons to whom the Software is
+ * furnished to do so, under the terms of the MPL or the MIT/X-derivate
+ * licenses. You may pick one of these licenses.
+ *
+ * This software is distributed on an "AS IS" basis, WITHOUT WARRANTY OF ANY
+ * KIND, either express or implied.
+ *
+ * $Id$
+ *****************************************************************************/
+typedef void CURL;
+typedef void CURLconnect;
+
+#endif /* __CURL_TYPES_H */