curl: Move sources back into upstream layout

Update our build files as needed to compensate.

1 files changed, 0 insertions, 306 deletions

diff --git a/Utilities/cmcurl/hostip6.c b/Utilities/cmcurl/hostip6.c
deleted file mode 100644
index c8bbdb5..0000000
--- a/Utilities/cmcurl/hostip6.c
+++ /dev/null
@@ -1,306 +0,0 @@
-/***************************************************************************
- *                                  _   _ ____  _
- *  Project                     ___| | | |  _ \| |
- *                             / __| | | | |_) | |
- *                            | (__| |_| |  _ <| |___
- *                             \___|\___/|_| \_\_____|
- *
- * Copyright (C) 1998 - 2006, Daniel Stenberg, <daniel@haxx.se>, et al.
- *
- * This software is licensed as described in the file COPYING, which
- * you should have received as part of this distribution. The terms
- * are also available at http://curl.haxx.se/docs/copyright.html.
- *
- * You may opt to use, copy, modify, merge, publish, distribute and/or sell
- * copies of the Software, and permit persons to whom the Software is
- * furnished to do so, under the terms of the COPYING file.
- *
- * This software is distributed on an "AS IS" basis, WITHOUT WARRANTY OF ANY
- * KIND, either express or implied.
- *
- * $Id$
- ***************************************************************************/
-
-#include "setup.h"
-
-#include <string.h>
-
-#ifdef NEED_MALLOC_H
-#include <malloc.h>
-#endif
-#ifdef HAVE_SYS_TYPES_H
-#include <sys/types.h>
-#endif
-#ifdef HAVE_SYS_SOCKET_H
-#include <sys/socket.h>
-#endif
-#ifdef HAVE_NETINET_IN_H
-#include <netinet/in.h>
-#endif
-#ifdef HAVE_NETDB_H
-#include <netdb.h>
-#endif
-#ifdef HAVE_ARPA_INET_H
-#include <arpa/inet.h>
-#endif
-#ifdef HAVE_STDLIB_H
-#include <stdlib.h>     /* required for free() prototypes */
-#endif
-#ifdef HAVE_UNISTD_H
-#include <unistd.h>     /* for the close() proto */
-#endif
-#ifdef  VMS
-#include <in.h>
-#include <inet.h>
-#include <stdlib.h>
-#endif
-
-#ifdef HAVE_SETJMP_H
-#include <setjmp.h>
-#endif
-
-#ifdef HAVE_PROCESS_H
-#include <process.h>
-#endif
-
-#include "urldata.h"
-#include "sendf.h"
-#include "hostip.h"
-#include "hash.h"
-#include "share.h"
-#include "strerror.h"
-#include "url.h"
-#include "inet_pton.h"
-#include "connect.h"
-
-#define _MPRINTF_REPLACE /* use our functions only */
-#include <curl/mprintf.h>
-
-#if defined(HAVE_INET_NTOA_R) && !defined(HAVE_INET_NTOA_R_DECL)
-#include "inet_ntoa_r.h"
-#endif
-
-#include "memory.h"
-/* The last #include file should be: */
-#include "memdebug.h"
-
-/***********************************************************************
- * Only for ipv6-enabled builds
- **********************************************************************/
-#ifdef CURLRES_IPV6
-#ifndef CURLRES_ARES
-/*
- * This is a wrapper function for freeing name information in a protocol
- * independent way. This takes care of using the appropriate underlaying
- * function.
- */
-void Curl_freeaddrinfo(Curl_addrinfo *p)
-{
-  freeaddrinfo(p);
-}
-
-#ifdef CURLRES_ASYNCH
-/*
- * Curl_addrinfo_copy() is used by the asynch callback to copy a given
- * address. But this is an ipv6 build and then we don't copy the address, we
- * just return the same pointer!
- */
-Curl_addrinfo *Curl_addrinfo_copy(const void *orig, int port)
-{
-  (void) port;
-  return (Curl_addrinfo*)orig;
-}
-#endif  /* CURLRES_ASYNCH */
-#endif  /* CURLRES_ARES */
-
-#ifdef CURLDEBUG
-/* These are strictly for memory tracing and are using the same style as the
- * family otherwise present in memdebug.c. I put these ones here since they
- * require a bunch of structs I didn't wanna include in memdebug.c
- */
-int curl_dogetaddrinfo(const char *hostname, const char *service,
-                       struct addrinfo *hints,
-                       struct addrinfo **result,
-                       int line, const char *source)
-{
-  int res=(getaddrinfo)(hostname, service, hints, result);
-  if(0 == res) {
-    /* success */
-    if(logfile)
-      fprintf(logfile, "ADDR %s:%d getaddrinfo() = %p\n",
-              source, line, (void *)*result);
-  }
-  else {
-    if(logfile)
-      fprintf(logfile, "ADDR %s:%d getaddrinfo() failed\n",
-              source, line);
-  }
-  return res;
-}
-
-/*
- * For CURLRES_ARS, this should be written using ares_gethostbyaddr()
- * (ignoring the fact c-ares doesn't return 'serv').
- */
-#ifdef HAVE_GETNAMEINFO
-int curl_dogetnameinfo(GETNAMEINFO_QUAL_ARG1 GETNAMEINFO_TYPE_ARG1 sa,
-                       GETNAMEINFO_TYPE_ARG2 salen,
-                       char *host, GETNAMEINFO_TYPE_ARG46 hostlen,
-                       char *serv, GETNAMEINFO_TYPE_ARG46 servlen,
-                       GETNAMEINFO_TYPE_ARG7 flags,
-                       int line, const char *source)
-{
-  int res = (getnameinfo)(sa, salen,
-                          host, hostlen,
-                          serv, servlen,
-                          flags);
-  if(0 == res) {
-    /* success */
-    if(logfile)
-      fprintf(logfile, "GETNAME %s:%d getnameinfo()\n",
-              source, line);
-  }
-  else {
-    if(logfile)
-      fprintf(logfile, "GETNAME %s:%d getnameinfo() failed = %d\n",
-              source, line, res);
-  }
-  return res;
-}
-#endif
-
-void curl_dofreeaddrinfo(struct addrinfo *freethis,
-                         int line, const char *source)
-{
-  (freeaddrinfo)(freethis);
-  if(logfile)
-    fprintf(logfile, "ADDR %s:%d freeaddrinfo(%p)\n",
-            source, line, (void *)freethis);
-}
-#endif  /* CURLDEBUG */
-
-/*
- * Curl_ipvalid() checks what CURL_IPRESOLVE_* requirements that might've
- * been set and returns TRUE if they are OK.
- */
-bool Curl_ipvalid(struct SessionHandle *data)
-{
-  if(data->set.ip_version == CURL_IPRESOLVE_V6) {
-    /* see if we have an IPv6 stack */
-    curl_socket_t s = socket(PF_INET6, SOCK_DGRAM, 0);
-    if (s == CURL_SOCKET_BAD)
-      /* an ipv6 address was requested and we can't get/use one */
-      return FALSE;
-    sclose(s);
-  }
-  return TRUE;
-}
-
-#if !defined(USE_THREADING_GETADDRINFO) && !defined(CURLRES_ARES)
-
-#ifdef DEBUG_ADDRINFO
-static void dump_addrinfo(struct connectdata *conn, const struct addrinfo *ai)
-{
-  printf("dump_addrinfo:\n");
-  for ( ; ai; ai = ai->ai_next) {
-    char  buf[INET6_ADDRSTRLEN];
-
-    printf("    fam %2d, CNAME %s, ",
-           ai->ai_family, ai->ai_canonname ? ai->ai_canonname : "<none>");
-    if (Curl_printable_address(ai, buf, sizeof(buf)))
-      printf("%s\n", buf);
-    else
-      printf("failed; %s\n", Curl_strerror(conn, Curl_sockerrno()));
-  }
-}
-#else
-#define dump_addrinfo(x,y)
-#endif
-
-/*
- * Curl_getaddrinfo() when built ipv6-enabled (non-threading and
- * non-ares version).
- *
- * Returns name information about the given hostname and port number. If
- * successful, the 'addrinfo' is returned and the forth argument will point to
- * memory we need to free after use. That memory *MUST* be freed with
- * Curl_freeaddrinfo(), nothing else.
- */
-Curl_addrinfo *Curl_getaddrinfo(struct connectdata *conn,
-                                const char *hostname,
-                                int port,
-                                int *waitp)
-{
-  struct addrinfo hints, *res;
-  int error;
-  char sbuf[NI_MAXSERV];
-  char *sbufptr = NULL;
-  char addrbuf[128];
-  curl_socket_t s;
-  int pf;
-  struct SessionHandle *data = conn->data;
-
-  *waitp=0; /* don't wait, we have the response now */
-
-  /* see if we have an IPv6 stack */
-  s = socket(PF_INET6, SOCK_DGRAM, 0);
-  if (s == CURL_SOCKET_BAD) {
-    /* Some non-IPv6 stacks have been found to make very slow name resolves
-     * when PF_UNSPEC is used, so thus we switch to a mere PF_INET lookup if
-     * the stack seems to be a non-ipv6 one. */
-
-    pf = PF_INET;
-  }
-  else {
-    /* This seems to be an IPv6-capable stack, use PF_UNSPEC for the widest
-     * possible checks. And close the socket again.
-     */
-    sclose(s);
-
-    /*
-     * Check if a more limited name resolve has been requested.
-     */
-    switch(data->set.ip_version) {
-    case CURL_IPRESOLVE_V4:
-      pf = PF_INET;
-      break;
-    case CURL_IPRESOLVE_V6:
-      pf = PF_INET6;
-      break;
-    default:
-      pf = PF_UNSPEC;
-      break;
-    }
-  }
-
-  memset(&hints, 0, sizeof(hints));
-  hints.ai_family = pf;
-  hints.ai_socktype = conn->socktype;
-
-  if((1 == Curl_inet_pton(AF_INET, hostname, addrbuf)) ||
-     (1 == Curl_inet_pton(AF_INET6, hostname, addrbuf))) {
-    /* the given address is numerical only, prevent a reverse lookup */
-    hints.ai_flags = AI_NUMERICHOST;
-  }
-#if 0 /* removed nov 8 2005 before 7.15.1 */
-  else
-    hints.ai_flags = AI_CANONNAME;
-#endif
-
-  if(port) {
-    snprintf(sbuf, sizeof(sbuf), "%d", port);
-    sbufptr=sbuf;
-  }
-  error = getaddrinfo(hostname, sbufptr, &hints, &res);
-  if (error) {
-    infof(data, "getaddrinfo(3) failed for %s:%d\n", hostname, port);
-    return NULL;
-  }
-
-  dump_addrinfo(conn, res);
-
-  return res;
-}
-#endif /* !USE_THREADING_GETADDRINFO && !CURLRES_ARES */
-#endif /* ipv6 */
-