libarchive: Remove our copy to make room for new import

1 files changed, 0 insertions, 366 deletions

diff --git a/Utilities/cmlibarchive/libarchive/libarchive_internals.3 b/Utilities/cmlibarchive/libarchive/libarchive_internals.3
deleted file mode 100644
index 9a42b76..0000000
--- a/Utilities/cmlibarchive/libarchive/libarchive_internals.3
+++ /dev/null
@@ -1,366 +0,0 @@
-.\" Copyright (c) 2003-2007 Tim Kientzle
-.\" All rights reserved.
-.\"
-.\" Redistribution and use in source and binary forms, with or without
-.\" modification, are permitted provided that the following conditions
-.\" are met:
-.\" 1. Redistributions of source code must retain the above copyright
-.\"    notice, this list of conditions and the following disclaimer.
-.\" 2. Redistributions in binary form must reproduce the above copyright
-.\"    notice, this list of conditions and the following disclaimer in the
-.\"    documentation and/or other materials provided with the distribution.
-.\"
-.\" THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
-.\" ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
-.\" IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
-.\" ARE DISCLAIMED.  IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
-.\" FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
-.\" DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
-.\" OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
-.\" HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
-.\" LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
-.\" OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
-.\" SUCH DAMAGE.
-.\"
-.\" $FreeBSD: src/lib/libarchive/libarchive_internals.3,v 1.2 2007/12/30 04:58:22 kientzle Exp $
-.\"
-.Dd April 16, 2007
-.Dt LIBARCHIVE 3
-.Os
-.Sh NAME
-.Nm libarchive_internals
-.Nd description of libarchive internal interfaces
-.Sh OVERVIEW
-The
-.Nm libarchive
-library provides a flexible interface for reading and writing
-streaming archive files such as tar and cpio.
-Internally, it follows a modular layered design that should
-make it easy to add new archive and compression formats.
-.Sh GENERAL ARCHITECTURE
-Externally, libarchive exposes most operations through an
-opaque, object-style interface.
-The
-.Xr archive_entry 1
-objects store information about a single filesystem object.
-The rest of the library provides facilities to write
-.Xr archive_entry 1
-objects to archive files,
-read them from archive files,
-and write them to disk.
-(There are plans to add a facility to read
-.Xr archive_entry 1
-objects from disk as well.)
-.Pp
-The read and write APIs each have four layers: a public API
-layer, a format layer that understands the archive file format,
-a compression layer, and an I/O layer.
-The I/O layer is completely exposed to clients who can replace
-it entirely with their own functions.
-.Pp
-In order to provide as much consistency as possible for clients,
-some public functions are virtualized.
-Eventually, it should be possible for clients to open
-an archive or disk writer, and then use a single set of
-code to select and write entries, regardless of the target.
-.Sh READ ARCHITECTURE
-From the outside, clients use the
-.Xr archive_read 3
-API to manipulate an
-.Nm archive
-object to read entries and bodies from an archive stream.
-Internally, the
-.Nm archive
-object is cast to an
-.Nm archive_read
-object, which holds all read-specific data.
-The API has four layers:
-The lowest layer is the I/O layer.
-This layer can be overridden by clients, but most clients use
-the packaged I/O callbacks provided, for example, by
-.Xr archive_read_open_memory 3 ,
-and
-.Xr archive_read_open_fd 3 .
-The compression layer calls the I/O layer to
-read bytes and decompresses them for the format layer.
-The format layer unpacks a stream of uncompressed bytes and
-creates
-.Nm archive_entry
-objects from the incoming data.
-The API layer tracks overall state
-(for example, it prevents clients from reading data before reading a header)
-and invokes the format and compression layer operations
-through registered function pointers.
-In particular, the API layer drives the format-detection process:
-When opening the archive, it reads an initial block of data
-and offers it to each registered compression handler.
-The one with the highest bid is initialized with the first block.
-Similarly, the format handlers are polled to see which handler
-is the best for each archive.
-(Prior to 2.4.0, the format bidders were invoked for each
-entry, but this design hindered error recovery.)
-.Ss I/O Layer and Client Callbacks
-The read API goes to some lengths to be nice to clients.
-As a result, there are few restrictions on the behavior of
-the client callbacks.
-.Pp
-The client read callback is expected to provide a block
-of data on each call.
-A zero-length return does indicate end of file, but otherwise
-blocks may be as small as one byte or as large as the entire file.
-In particular, blocks may be of different sizes.
-.Pp
-The client skip callback returns the number of bytes actually
-skipped, which may be much smaller than the skip requested.
-The only requirement is that the skip not be larger.
-In particular, clients are allowed to return zero for any
-skip that they don't want to handle.
-The skip callback must never be invoked with a negative value.
-.Pp
-Keep in mind that not all clients are reading from disk:
-clients reading from networks may provide different-sized
-blocks on every request and cannot skip at all;
-advanced clients may use
-.Xr mmap 2
-to read the entire file into memory at once and return the
-entire file to libarchive as a single block;
-other clients may begin asynchronous I/O operations for the
-next block on each request.
-.Ss Decompresssion Layer
-The decompression layer not only handles decompression,
-it also buffers data so that the format handlers see a
-much nicer I/O model.
-The decompression API is a two stage peek/consume model.
-A read_ahead request specifies a minimum read amount;
-the decompression layer must provide a pointer to at least
-that much data.
-If more data is immediately available, it should return more:
-the format layer handles bulk data reads by asking for a minimum
-of one byte and then copying as much data as is available.
-.Pp
-A subsequent call to the
-.Fn consume
-function advances the read pointer.
-Note that data returned from a
-.Fn read_ahead
-call is guaranteed to remain in place until
-the next call to
-.Fn read_ahead .
-Intervening calls to
-.Fn consume
-should not cause the data to move.
-.Pp
-Skip requests must always be handled exactly.
-Decompression handlers that cannot seek forward should
-not register a skip handler;
-the API layer fills in a generic skip handler that reads and discards data.
-.Pp
-A decompression handler has a specific lifecycle:
-.Bl -tag -compact -width indent
-.It Registration/Configuration
-When the client invokes the public support function,
-the decompression handler invokes the internal
-.Fn __archive_read_register_compression
-function to provide bid and initialization functions.
-This function returns
-.Cm NULL
-on error or else a pointer to a
-.Cm struct decompressor_t .
-This structure contains a
-.Va void * config
-slot that can be used for storing any customization information.
-.It Bid
-The bid function is invoked with a pointer and size of a block of data.
-The decompressor can access its config data
-through the
-.Va decompressor
-element of the
-.Cm archive_read
-object.
-The bid function is otherwise stateless.
-In particular, it must not perform any I/O operations.
-.Pp
-The value returned by the bid function indicates its suitability
-for handling this data stream.
-A bid of zero will ensure that this decompressor is never invoked.
-Return zero if magic number checks fail.
-Otherwise, your initial implementation should return the number of bits
-actually checked.
-For example, if you verify two full bytes and three bits of another
-byte, bid 19.
-Note that the initial block may be very short;
-be careful to only inspect the data you are given.
-(The current decompressors require two bytes for correct bidding.)
-.It Initialize
-The winning bidder will have its init function called.
-This function should initialize the remaining slots of the
-.Va struct decompressor_t
-object pointed to by the
-.Va decompressor
-element of the
-.Va archive_read
-object.
-In particular, it should allocate any working data it needs
-in the
-.Va data
-slot of that structure.
-The init function is called with the block of data that
-was used for tasting.
-At this point, the decompressor is responsible for all I/O
-requests to the client callbacks.
-The decompressor is free to read more data as and when
-necessary.
-.It Satisfy I/O requests
-The format handler will invoke the
-.Va read_ahead ,
-.Va consume ,
-and
-.Va skip
-functions as needed.
-.It Finish
-The finish method is called only once when the archive is closed.
-It should release anything stored in the
-.Va data
-and
-.Va config
-slots of the
-.Va decompressor
-object.
-It should not invoke the client close callback.
-.El
-.Ss Format Layer
-The read formats have a similar lifecycle to the decompression handlers:
-.Bl -tag -compact -width indent
-.It Registration
-Allocate your private data and initialize your pointers.
-.It Bid
-Formats bid by invoking the
-.Fn read_ahead
-decompression method but not calling the
-.Fn consume
-method.
-This allows each bidder to look ahead in the input stream.
-Bidders should not look further ahead than necessary, as long
-look aheads put pressure on the decompression layer to buffer
-lots of data.
-Most formats only require a few hundred bytes of look ahead;
-look aheads of a few kilobytes are reasonable.
-(The ISO9660 reader sometimes looks ahead by 48k, which
-should be considered an upper limit.)
-.It Read header
-The header read is usually the most complex part of any format.
-There are a few strategies worth mentioning:
-For formats such as tar or cpio, reading and parsing the header is
-straightforward since headers alternate with data.
-For formats that store all header data at the beginning of the file,
-the first header read request may have to read all headers into
-memory and store that data, sorted by the location of the file
-data.
-Subsequent header read requests will skip forward to the
-beginning of the file data and return the corresponding header.
-.It Read Data
-The read data interface supports sparse files; this requires that
-each call return a block of data specifying the file offset and
-size.
-This may require you to carefully track the location so that you
-can return accurate file offsets for each read.
-Remember that the decompressor will return as much data as it has.
-Generally, you will want to request one byte,
-examine the return value to see how much data is available, and
-possibly trim that to the amount you can use.
-You should invoke consume for each block just before you return it.
-.It Skip All Data
-The skip data call should skip over all file data and trailing padding.
-This is called automatically by the API layer just before each
-header read.
-It is also called in response to the client calling the public
-.Fn data_skip
-function.
-.It Cleanup
-On cleanup, the format should release all of its allocated memory.
-.El
-.Ss API Layer
-XXX to do XXX
-.Sh WRITE ARCHITECTURE
-The write API has a similar set of four layers:
-an API layer, a format layer, a compression layer, and an I/O layer.
-The registration here is much simpler because only
-one format and one compression can be registered at a time.
-.Ss I/O Layer and Client Callbacks
-XXX To be written XXX
-.Ss Compression Layer
-XXX To be written XXX
-.Ss Format Layer
-XXX To be written XXX
-.Ss API Layer
-XXX To be written XXX
-.Sh WRITE_DISK ARCHITECTURE
-The write_disk API is intended to look just like the write API
-to clients.
-Since it does not handle multiple formats or compression, it
-is not layered internally.
-.Sh GENERAL SERVICES
-The
-.Nm archive_read ,
-.Nm archive_write ,
-and
-.Nm archive_write_disk
-objects all contain an initial
-.Nm archive
-object which provides common support for a set of standard services.
-(Recall that ANSI/ISO C90 guarantees that you can cast freely between
-a pointer to a structure and a pointer to the first element of that
-structure.)
-The
-.Nm archive
-object has a magic value that indicates which API this object
-is associated with,
-slots for storing error information,
-and function pointers for virtualized API functions.
-.Sh MISCELLANEOUS NOTES
-Connecting existing archiving libraries into libarchive is generally
-quite difficult.
-In particular, many existing libraries strongly assume that you
-are reading from a file; they seek forwards and backwards as necessary
-to locate various pieces of information.
-In contrast, libarchive never seeks backwards in its input, which
-sometimes requires very different approaches.
-.Pp
-For example, libarchive's ISO9660 support operates very differently
-from most ISO9660 readers.
-The libarchive support utilizes a work-queue design that
-keeps a list of known entries sorted by their location in the input.
-Whenever libarchive's ISO9660 implementation is asked for the next
-header, checks this list to find the next item on the disk.
-Directories are parsed when they are encountered and new
-items are added to the list.
-This design relies heavily on the ISO9660 image being optimized so that
-directories always occur earlier on the disk than the files they
-describe.
-.Pp
-Depending on the specific format, such approaches may not be possible.
-The ZIP format specification, for example, allows archivers to store
-key information only at the end of the file.
-In theory, it is possible to create ZIP archives that cannot
-be read without seeking.
-Fortunately, such archives are very rare, and libarchive can read
-most ZIP archives, though it cannot always extract as much information
-as a dedicated ZIP program.
-.Sh SEE ALSO
-.Xr archive 3 ,
-.Xr archive_entry 3 ,
-.Xr archive_read 3 ,
-.Xr archive_write 3 ,
-.Xr archive_write_disk 3
-.Sh HISTORY
-The
-.Nm libarchive
-library first appeared in
-.Fx 5.3 .
-.Sh AUTHORS
-.An -nosplit
-The
-.Nm libarchive
-library was written by
-.An Tim Kientzle Aq kientzle@acm.org .
-.Sh BUGS