diff options
| -rw-r--r-- | Modules/FindQt4.cmake | 461 | ||||
| -rw-r--r-- | Modules/Qt4ConfigDependentSettings.cmake | 10 | ||||
| -rw-r--r-- | Modules/UseQt4.cmake | 4 |
3 files changed, 229 insertions, 246 deletions
diff --git a/Modules/FindQt4.cmake b/Modules/FindQt4.cmake index 654879e..95daee9 100644 --- a/Modules/FindQt4.cmake +++ b/Modules/FindQt4.cmake @@ -358,6 +358,90 @@ SET(QT_USE_FILE ${CMAKE_ROOT}/Modules/UseQt4.cmake) SET( QT_DEFINITIONS "") +# convenience macro for dealing with debug/release library names +MACRO (_QT4_ADJUST_LIB_VARS _camelCaseBasename) + + STRING(TOUPPER "${_camelCaseBasename}" basename) + + # The name of the imported targets, i.e. the prefix "Qt4::" must not change, + # since it is stored in EXPORT-files as name of a required library. If the name would change + # here, this would lead to the imported Qt4-library targets not being resolved by cmake anymore. + IF (QT_${basename}_LIBRARY_RELEASE OR QT_${basename}_LIBRARY_DEBUG) + + IF(NOT TARGET Qt4::${_camelCaseBasename}) + ADD_LIBRARY(Qt4::${_camelCaseBasename} UNKNOWN IMPORTED ) + + IF (QT_${basename}_LIBRARY_RELEASE) + SET_PROPERTY(TARGET Qt4::${_camelCaseBasename} APPEND PROPERTY IMPORTED_CONFIGURATIONS RELEASE) + SET_PROPERTY(TARGET Qt4::${_camelCaseBasename} PROPERTY IMPORTED_LOCATION_RELEASE "${QT_${basename}_LIBRARY_RELEASE}" ) + ENDIF (QT_${basename}_LIBRARY_RELEASE) + + IF (QT_${basename}_LIBRARY_DEBUG) + SET_PROPERTY(TARGET Qt4::${_camelCaseBasename} APPEND PROPERTY IMPORTED_CONFIGURATIONS DEBUG) + SET_PROPERTY(TARGET Qt4::${_camelCaseBasename} PROPERTY IMPORTED_LOCATION_DEBUG "${QT_${basename}_LIBRARY_DEBUG}" ) + ENDIF (QT_${basename}_LIBRARY_DEBUG) + ENDIF(NOT TARGET Qt4::${_camelCaseBasename}) + + # If QT_USE_IMPORTED_TARGETS is enabled, the QT_QTFOO_LIBRARY variables are set to point at these + # imported targets. This works better in general, and is also in almost all cases fully + # backward compatible. The only issue is when a project A which had this enabled then exports its + # libraries via export or EXPORT_LIBRARY_DEPENDENCIES(). In this case the libraries from project + # A will depend on the imported Qt targets, and the names of these imported targets will be stored + # in the dependency files on disk. This means when a project B then uses project A, these imported + # targets must be created again, otherwise e.g. "Qt4__QtCore" will be interpreted as name of a + # library file on disk, and not as a target, and linking will fail: + IF(QT_USE_IMPORTED_TARGETS) + SET(QT_${basename}_LIBRARY Qt4::${_camelCaseBasename} ) + SET(QT_${basename}_LIBRARIES Qt4::${_camelCaseBasename} ) + ELSE(QT_USE_IMPORTED_TARGETS) + + # if the release- as well as the debug-version of the library have been found: + IF (QT_${basename}_LIBRARY_DEBUG AND QT_${basename}_LIBRARY_RELEASE) + # if the generator supports configuration types then set + # optimized and debug libraries, or if the CMAKE_BUILD_TYPE has a value + IF (CMAKE_CONFIGURATION_TYPES OR CMAKE_BUILD_TYPE) + SET(QT_${basename}_LIBRARY optimized ${QT_${basename}_LIBRARY_RELEASE} debug ${QT_${basename}_LIBRARY_DEBUG}) + ELSE(CMAKE_CONFIGURATION_TYPES OR CMAKE_BUILD_TYPE) + # if there are no configuration types and CMAKE_BUILD_TYPE has no value + # then just use the release libraries + SET(QT_${basename}_LIBRARY ${QT_${basename}_LIBRARY_RELEASE} ) + ENDIF(CMAKE_CONFIGURATION_TYPES OR CMAKE_BUILD_TYPE) + SET(QT_${basename}_LIBRARIES optimized ${QT_${basename}_LIBRARY_RELEASE} debug ${QT_${basename}_LIBRARY_DEBUG}) + ENDIF (QT_${basename}_LIBRARY_DEBUG AND QT_${basename}_LIBRARY_RELEASE) + + # if only the release version was found, set the debug variable also to the release version + IF (QT_${basename}_LIBRARY_RELEASE AND NOT QT_${basename}_LIBRARY_DEBUG) + SET(QT_${basename}_LIBRARY_DEBUG ${QT_${basename}_LIBRARY_RELEASE}) + SET(QT_${basename}_LIBRARY ${QT_${basename}_LIBRARY_RELEASE}) + SET(QT_${basename}_LIBRARIES ${QT_${basename}_LIBRARY_RELEASE}) + ENDIF (QT_${basename}_LIBRARY_RELEASE AND NOT QT_${basename}_LIBRARY_DEBUG) + + # if only the debug version was found, set the release variable also to the debug version + IF (QT_${basename}_LIBRARY_DEBUG AND NOT QT_${basename}_LIBRARY_RELEASE) + SET(QT_${basename}_LIBRARY_RELEASE ${QT_${basename}_LIBRARY_DEBUG}) + SET(QT_${basename}_LIBRARY ${QT_${basename}_LIBRARY_DEBUG}) + SET(QT_${basename}_LIBRARIES ${QT_${basename}_LIBRARY_DEBUG}) + ENDIF (QT_${basename}_LIBRARY_DEBUG AND NOT QT_${basename}_LIBRARY_RELEASE) + + # put the value in the cache: + SET(QT_${basename}_LIBRARY ${QT_${basename}_LIBRARY} CACHE STRING "The Qt ${basename} library" FORCE) + + ENDIF(QT_USE_IMPORTED_TARGETS) + + SET(QT_${basename}_FOUND 1) + + ENDIF (QT_${basename}_LIBRARY_RELEASE OR QT_${basename}_LIBRARY_DEBUG) + + IF (QT_${basename}_INCLUDE_DIR) + #add the include directory to QT_INCLUDES + SET(QT_INCLUDES "${QT_${basename}_INCLUDE_DIR}" ${QT_INCLUDES}) + ENDIF (QT_${basename}_INCLUDE_DIR) + + # Make variables changeble to the advanced user + MARK_AS_ADVANCED(QT_${basename}_LIBRARY QT_${basename}_LIBRARY_RELEASE QT_${basename}_LIBRARY_DEBUG QT_${basename}_INCLUDE_DIR) +ENDMACRO (_QT4_ADJUST_LIB_VARS) + + SET(QT4_INSTALLED_VERSION_TOO_OLD FALSE) GET_FILENAME_COMPONENT(qt_install_version "[HKEY_CURRENT_USER\\Software\\trolltech\\Versions;DefaultQtVersion]" NAME) @@ -468,53 +552,144 @@ ENDIF (QT_QMAKE_EXECUTABLE) IF (QT4_QMAKE_FOUND) - # ask qmake for the library dir - # Set QT_LIBRARY_DIR - IF (NOT QT_LIBRARY_DIR OR QT_QMAKE_CHANGED) + # ask qmake for the mkspecs directory + # we do this first because QT_LIBINFIX might be set + IF (NOT QT_MKSPECS_DIR OR QT_QMAKE_CHANGED) + EXEC_PROGRAM( ${QT_QMAKE_EXECUTABLE} + ARGS "-query QMAKE_MKSPECS" + OUTPUT_VARIABLE qt_mkspecs_dirs ) + # do not replace : on windows as it might be a drive letter + # and windows should already use ; as a separator + IF(UNIX) + STRING(REPLACE ":" ";" qt_mkspecs_dirs "${qt_mkspecs_dirs}") + ENDIF(UNIX) + set(qt_cross_paths) + foreach(qt_cross_path ${CMAKE_FIND_ROOT_PATH}) + set(qt_cross_paths ${qt_cross_paths} "${qt_cross_path}/mkspecs") + endforeach(qt_cross_path) + FIND_PATH(QT_MKSPECS_DIR NAMES qconfig.pri + HINTS ${qt_cross_paths} ${qt_mkspecs_dirs} + DOC "The location of the Qt mkspecs containing qconfig.pri") + ENDIF() + + IF(EXISTS "${QT_MKSPECS_DIR}/qconfig.pri") + FILE(READ ${QT_MKSPECS_DIR}/qconfig.pri _qconfig_FILE_contents) + STRING(REGEX MATCH "QT_CONFIG[^\n]+" QT_QCONFIG "${_qconfig_FILE_contents}") + STRING(REGEX MATCH "CONFIG[^\n]+" QT_CONFIG "${_qconfig_FILE_contents}") + STRING(REGEX MATCH "EDITION[^\n]+" QT_EDITION "${_qconfig_FILE_contents}") + STRING(REGEX MATCH "QT_LIBINFIX[^\n]+" _qconfig_qt_libinfix "${_qconfig_FILE_contents}") + STRING(REGEX REPLACE "QT_LIBINFIX *= *([^\n]*)" "\\1" QT_LIBINFIX "${_qconfig_qt_libinfix}") + ENDIF(EXISTS "${QT_MKSPECS_DIR}/qconfig.pri") + IF("${QT_EDITION}" MATCHES "DesktopLight") + SET(QT_EDITION_DESKTOPLIGHT 1) + ENDIF("${QT_EDITION}" MATCHES "DesktopLight") + + # ask qmake for the library dir as a hint, then search for QtCore library and use that as a reference for finding the + # others and for setting QT_LIBRARY_DIR + IF (NOT QT_QTCORE_LIBRARY OR QT_QMAKE_CHANGED) EXEC_PROGRAM( ${QT_QMAKE_EXECUTABLE} ARGS "-query QT_INSTALL_LIBS" OUTPUT_VARIABLE QT_LIBRARY_DIR_TMP ) # make sure we have / and not \ as qmake gives on windows FILE(TO_CMAKE_PATH "${QT_LIBRARY_DIR_TMP}" QT_LIBRARY_DIR_TMP) - IF(EXISTS "${QT_LIBRARY_DIR_TMP}") - SET(QT_LIBRARY_DIR ${QT_LIBRARY_DIR_TMP} CACHE PATH "Qt library dir" FORCE) - ELSE(EXISTS "${QT_LIBRARY_DIR_TMP}") - MESSAGE("Warning: QT_QMAKE_EXECUTABLE reported QT_INSTALL_LIBS as ${QT_LIBRARY_DIR_TMP}") - MESSAGE("Warning: ${QT_LIBRARY_DIR_TMP} does NOT exist, Qt must NOT be installed correctly.") - ENDIF(EXISTS "${QT_LIBRARY_DIR_TMP}") - ENDIF(NOT QT_LIBRARY_DIR OR QT_QMAKE_CHANGED) - + FIND_LIBRARY(QT_QTCORE_LIBRARY_RELEASE + NAMES QtCore${QT_LIBINFIX} QtCore${QT_LIBINFIX}4 + HINTS ${QT_LIBRARY_DIR_TMP} + ) + FIND_LIBRARY(QT_QTCORE_LIBRARY_DEBUG + NAMES QtCore${QT_LIBINFIX}_debug QtCore${QT_LIBINFIX}d QtCore${QT_LIBINFIX}d4 + HINTS ${QT_LIBRARY_DIR_TMP} + ) + ENDIF (NOT QT_QTCORE_LIBRARY OR QT_QMAKE_CHANGED) + + _QT4_ADJUST_LIB_VARS(QtCore) + + # set QT_LIBRARY_DIR based on location of QtCore found. + IF(QT_QTCORE_LIBRARY_RELEASE) + GET_FILENAME_COMPONENT(QT_LIBRARY_DIR_TMP "${QT_QTCORE_LIBRARY_RELEASE}" PATH) + SET(QT_LIBRARY_DIR ${QT_LIBRARY_DIR_TMP} CACHE INTERNAL "Qt library dir" FORCE) + SET(QT_QTCORE_FOUND 1) + ELSEIF(QT_QTCORE_LIBRARY_DEBUG) + GET_FILENAME_COMPONENT(QT_LIBRARY_DIR_TMP "${QT_QTCORE_LIBRARY_DEBUG}" PATH) + SET(QT_LIBRARY_DIR ${QT_LIBRARY_DIR_TMP} CACHE INTERNAL "Qt library dir" FORCE) + SET(QT_QTCORE_FOUND 1) + ELSE() + MESSAGE("Warning: QT_QMAKE_EXECUTABLE reported QT_INSTALL_LIBS as ${QT_LIBRARY_DIR_TMP}") + MESSAGE("Warning: But QtCore couldn't be found. Qt must NOT be installed correctly.") + + # try dropping a hint if trying to use Visual Studio with Qt built by mingw + IF(QT_LIBRARY_DIR AND MSVC) + IF(EXISTS ${QT_LIBRARY_DIR_TMP}/libqtmain.a) + MESSAGE( FATAL_ERROR "It appears you're trying to use Visual Studio with Qt built by mingw. Those compilers do not produce code compatible with each other.") + ENDIF(EXISTS ${QT_LIBRARY_DIR_TMP}/libqtmain.a) + ENDIF(QT_LIBRARY_DIR AND MSVC) + + IF(Qt4_FIND_REQUIRED) + MESSAGE( FATAL_ERROR "Could NOT find QtCore. Check ${CMAKE_BINARY_DIR}${CMAKE_FILES_DIRECTORY}/CMakeError.log for more details.") + ENDIF(Qt4_FIND_REQUIRED) + ENDIF() + IF (APPLE) IF (EXISTS ${QT_LIBRARY_DIR}/QtCore.framework) - SET(QT_USE_FRAMEWORKS ON - CACHE BOOL "Set to ON if Qt build uses frameworks." FORCE) + SET(QT_USE_FRAMEWORKS ON CACHE INTERNAL "" FORCE) ELSE (EXISTS ${QT_LIBRARY_DIR}/QtCore.framework) - SET(QT_USE_FRAMEWORKS OFF - CACHE BOOL "Set to ON if Qt build uses frameworks." FORCE) + SET(QT_USE_FRAMEWORKS OFF CACHE INTERNAL "" FORCE) ENDIF (EXISTS ${QT_LIBRARY_DIR}/QtCore.framework) - MARK_AS_ADVANCED(QT_USE_FRAMEWORKS) ENDIF (APPLE) # ask qmake for the binary dir - IF (QT_LIBRARY_DIR AND NOT QT_BINARY_DIR OR QT_QMAKE_CHANGED) + IF (NOT QT_BINARY_DIR OR QT_QMAKE_CHANGED) EXEC_PROGRAM(${QT_QMAKE_EXECUTABLE} ARGS "-query QT_INSTALL_BINS" OUTPUT_VARIABLE qt_bins ) # make sure we have / and not \ as qmake gives on windows FILE(TO_CMAKE_PATH "${qt_bins}" qt_bins) SET(QT_BINARY_DIR ${qt_bins} CACHE INTERNAL "" FORCE) - ENDIF (QT_LIBRARY_DIR AND NOT QT_BINARY_DIR OR QT_QMAKE_CHANGED) + ENDIF (NOT QT_BINARY_DIR OR QT_QMAKE_CHANGED) # ask qmake for the include dir - IF (QT_LIBRARY_DIR AND NOT QT_HEADERS_DIR OR QT_QMAKE_CHANGED) + IF (QT_LIBRARY_DIR AND (NOT QT_QTCORE_INCLUDE_DIR OR NOT QT_HEADERS_DIR OR QT_QMAKE_CHANGED)) EXEC_PROGRAM( ${QT_QMAKE_EXECUTABLE} ARGS "-query QT_INSTALL_HEADERS" OUTPUT_VARIABLE qt_headers ) # make sure we have / and not \ as qmake gives on windows FILE(TO_CMAKE_PATH "${qt_headers}" qt_headers) - SET(QT_HEADERS_DIR ${qt_headers} CACHE INTERNAL "" FORCE) - ENDIF (QT_LIBRARY_DIR AND NOT QT_HEADERS_DIR OR QT_QMAKE_CHANGED) + SET(QT_QTCORE_INCLUDE_DIR NOTFOUND) + FIND_PATH(QT_QTCORE_INCLUDE_DIR QtCore + HINTS ${qt_headers} + ${QT_LIBRARY_DIR}/QtCore.framework/Headers + PATH_SUFFIXES QtCore + ) + + # Set QT_HEADERS_DIR based on finding QtCore header + IF(QT_QTCORE_INCLUDE_DIR) + IF(QT_USE_FRAMEWORKS) + SET(QT_HEADERS_DIR "${qt_headers}" CACHE INTERNAL "" FORCE) + ELSE(QT_USE_FRAMEWORKS) + GET_FILENAME_COMPONENT(qt_headers "${QT_QTCORE_INCLUDE_DIR}/../" ABSOLUTE) + SET(QT_HEADERS_DIR "${qt_headers}" CACHE INTERNAL "" FORCE) + ENDIF(QT_USE_FRAMEWORKS) + ELSEIF() + MESSAGE("Warning: QT_QMAKE_EXECUTABLE reported QT_INSTALL_HEADERS as ${qt_headers}") + MESSAGE("Warning: But QtCore couldn't be found. Qt must NOT be installed correctly.") + ENDIF() + ENDIF() + + # Set QT_INCLUDE_DIR based on QT_HEADERS_DIR + IF(QT_HEADERS_DIR) + IF(QT_USE_FRAMEWORKS) + # Qt/Mac frameworks has two include dirs. + # One is the framework include for which CMake will add a -F flag + # and the other is an include dir for non-framework Qt modules + SET(QT_INCLUDE_DIR ${QT_HEADERS_DIR} ${QT_QTCORE_LIBRARY} ) + ELSE(QT_USE_FRAMEWORKS) + SET(QT_INCLUDE_DIR ${QT_HEADERS_DIR}) + ENDIF(QT_USE_FRAMEWORKS) + ENDIF(QT_HEADERS_DIR) + + # Set QT_INCLUDES + SET( QT_INCLUDES ${QT_MKSPECS_DIR}/default ${QT_INCLUDE_DIR} ${QT_QTCORE_INCLUDE_DIR}) # ask qmake for the documentation directory @@ -527,21 +702,6 @@ IF (QT4_QMAKE_FOUND) SET(QT_DOC_DIR ${qt_doc_dir} CACHE PATH "The location of the Qt docs" FORCE) ENDIF (QT_LIBRARY_DIR AND NOT QT_DOC_DIR OR QT_QMAKE_CHANGED) - # ask qmake for the mkspecs directory - IF (QT_LIBRARY_DIR AND NOT QT_MKSPECS_DIR OR QT_QMAKE_CHANGED) - EXEC_PROGRAM( ${QT_QMAKE_EXECUTABLE} - ARGS "-query QMAKE_MKSPECS" - OUTPUT_VARIABLE qt_mkspecs_dirs ) - # do not replace : on windows as it might be a drive letter - # and windows should already use ; as a separator - IF(UNIX) - STRING(REPLACE ":" ";" qt_mkspecs_dirs "${qt_mkspecs_dirs}") - ENDIF(UNIX) - SET(QT_MKSPECS_DIR NOTFOUND) - FIND_PATH(QT_MKSPECS_DIR qconfig.pri PATHS ${qt_mkspecs_dirs} - DOC "The location of the Qt mkspecs containing qconfig.pri" - NO_DEFAULT_PATH ) - ENDIF (QT_LIBRARY_DIR AND NOT QT_MKSPECS_DIR OR QT_QMAKE_CHANGED) # ask qmake for the plugins directory IF (QT_LIBRARY_DIR AND NOT QT_PLUGINS_DIR OR QT_QMAKE_CHANGED) @@ -568,6 +728,8 @@ IF (QT4_QMAKE_FOUND) QT_PLUGINS_DIR QT_TRANSLATIONS_DIR) + + ############################################# # # Find out what window system we're using @@ -577,11 +739,7 @@ IF (QT4_QMAKE_FOUND) SET(CMAKE_REQUIRED_INCLUDES_SAVE ${CMAKE_REQUIRED_INCLUDES}) SET(CMAKE_REQUIRED_FLAGS_SAVE ${CMAKE_REQUIRED_FLAGS}) # Add QT_INCLUDE_DIR to CMAKE_REQUIRED_INCLUDES - SET(CMAKE_REQUIRED_INCLUDES "${CMAKE_REQUIRED_INCLUDES};${QT_HEADERS_DIR}") - # On Mac OS X when Qt has framework support, also add the framework path - IF( QT_USE_FRAMEWORKS ) - SET(CMAKE_REQUIRED_FLAGS "-F${QT_LIBRARY_DIR} ") - ENDIF( QT_USE_FRAMEWORKS ) + SET(CMAKE_REQUIRED_INCLUDES "${CMAKE_REQUIRED_INCLUDES};${QT_INCLUDE_DIR}") # Check for Window system symbols (note: only one should end up being set) CHECK_SYMBOL_EXISTS(Q_WS_X11 "QtCore/qglobal.h" Q_WS_X11) CHECK_SYMBOL_EXISTS(Q_WS_WIN "QtCore/qglobal.h" Q_WS_WIN) @@ -615,7 +773,7 @@ IF (QT4_QMAKE_FOUND) # ######################################## - SET(QT_MODULES QtCore QtGui Qt3Support QtSvg QtScript QtTest QtUiTools + SET(QT_MODULES QtGui Qt3Support QtSvg QtScript QtTest QtUiTools QtHelp QtWebKit QtXmlPatterns phonon QtNetwork QtMultimedia QtNsPlugin QtOpenGL QtSql QtXml QtDesigner QtDBus QtScriptTools QtDeclarative) @@ -648,10 +806,10 @@ IF (QT4_QMAKE_FOUND) SET(QT_QAXSERVER_INCLUDE_DIR NOTFOUND) SET(QT_QAXSERVER_LIBRARY_RELEASE NOTFOUND) SET(QT_QAXSERVER_LIBRARY_DEBUG NOTFOUND) - IF(WIN32) + IF(Q_WS_WIN) SET(QT_QTMAIN_LIBRARY_DEBUG NOTFOUND) SET(QT_QTMAIN_LIBRARY_RELEASE NOTFOUND) - ENDIF(WIN32) + ENDIF(Q_WS_WIN) ENDIF(QT_QMAKE_CHANGED) FOREACH(QT_MODULE ${QT_MODULES}) @@ -674,20 +832,18 @@ IF (QT4_QMAKE_FOUND) ENDIF(${QT_MODULE} STREQUAL "phonon") ENDFOREACH(QT_MODULE) - IF(WIN32) + IF(Q_WS_WIN) SET(QT_MODULES ${QT_MODULES} QAxContainer QAxServer) # Set QT_AXCONTAINER_INCLUDE_DIR and QT_AXSERVER_INCLUDE_DIR FIND_PATH(QT_QAXCONTAINER_INCLUDE_DIR ActiveQt - PATHS - ${QT_HEADERS_DIR}/ActiveQt + PATHS ${QT_HEADERS_DIR}/ActiveQt NO_DEFAULT_PATH ) FIND_PATH(QT_QAXSERVER_INCLUDE_DIR ActiveQt - PATHS - ${QT_HEADERS_DIR}/ActiveQt + PATHS ${QT_HEADERS_DIR}/ActiveQt NO_DEFAULT_PATH ) - ENDIF(WIN32) + ENDIF(Q_WS_WIN) # Set QT_QTDESIGNERCOMPONENTS_INCLUDE_DIR FIND_PATH(QT_QTDESIGNERCOMPONENTS_INCLUDE_DIR QDesignerComponents @@ -713,49 +869,6 @@ IF (QT4_QMAKE_FOUND) NO_DEFAULT_PATH ) - # Set QT_INCLUDE_DIR by removine "/QtCore" in the string ${QT_QTCORE_INCLUDE_DIR} - IF( QT_QTCORE_INCLUDE_DIR ) - IF (QT_USE_FRAMEWORKS) - SET(QT_INCLUDE_DIR ${QT_HEADERS_DIR}) - ELSE (QT_USE_FRAMEWORKS) - STRING( REGEX REPLACE "/QtCore$" "" qt4_include_dir ${QT_QTCORE_INCLUDE_DIR}) - SET( QT_INCLUDE_DIR ${qt4_include_dir}) - ENDIF (QT_USE_FRAMEWORKS) - ENDIF( QT_QTCORE_INCLUDE_DIR ) - - IF( NOT QT_INCLUDE_DIR) - IF(Qt4_FIND_REQUIRED) - MESSAGE( FATAL_ERROR "Could NOT find QtCore header") - ENDIF(Qt4_FIND_REQUIRED) - ENDIF( NOT QT_INCLUDE_DIR) - - # Make variables changeble to the advanced user - MARK_AS_ADVANCED( QT_INCLUDE_DIR ) - - # Set QT_INCLUDES - SET( QT_INCLUDES ${QT_MKSPECS_DIR}/default ${QT_INCLUDE_DIR} ) - - - - - - ####################################### - # - # Qt configuration - # - ####################################### - IF(EXISTS "${QT_MKSPECS_DIR}/qconfig.pri") - FILE(READ ${QT_MKSPECS_DIR}/qconfig.pri _qconfig_FILE_contents) - STRING(REGEX MATCH "QT_CONFIG[^\n]+" QT_QCONFIG "${_qconfig_FILE_contents}") - STRING(REGEX MATCH "CONFIG[^\n]+" QT_CONFIG "${_qconfig_FILE_contents}") - STRING(REGEX MATCH "EDITION[^\n]+" QT_EDITION "${_qconfig_FILE_contents}") - STRING(REGEX MATCH "QT_LIBINFIX[^\n]+" _qconfig_qt_libinfix "${_qconfig_FILE_contents}") - STRING(REGEX REPLACE "QT_LIBINFIX *= *([^\n]*)" "\\1" QT_LIBINFIX "${_qconfig_qt_libinfix}") - ENDIF(EXISTS "${QT_MKSPECS_DIR}/qconfig.pri") - IF("${QT_EDITION}" MATCHES "DesktopLight") - SET(QT_EDITION_DESKTOPLIGHT 1) - ENDIF("${QT_EDITION}" MATCHES "DesktopLight") - ######################################## # # Setting the LIBRARY-Variables @@ -780,48 +893,32 @@ IF (QT4_QMAKE_FOUND) FIND_LIBRARY(QT_QTUITOOLS_LIBRARY_RELEASE NAMES QtUiTools${QT_LIBINFIX} PATHS ${QT_LIBRARY_DIR}) ENDIF(Q_WS_MAC AND QT_QTCORE_LIBRARY_RELEASE AND NOT QT_QTUITOOLS_LIBRARY_RELEASE) - IF( NOT QT_QTCORE_LIBRARY_DEBUG AND NOT QT_QTCORE_LIBRARY_RELEASE ) - - # try dropping a hint if trying to use Visual Studio with Qt built by mingw - IF(QT_LIBRARY_DIR AND MSVC) - IF(EXISTS ${QT_LIBRARY_DIR}/libqtmain.a) - MESSAGE( FATAL_ERROR "It appears you're trying to use Visual Studio with Qt built by mingw") - ENDIF(EXISTS ${QT_LIBRARY_DIR}/libqtmain.a) - ENDIF(QT_LIBRARY_DIR AND MSVC) - - IF(Qt4_FIND_REQUIRED) - MESSAGE( FATAL_ERROR "Could NOT find QtCore. Check ${CMAKE_BINARY_DIR}${CMAKE_FILES_DIRECTORY}/CMakeError.log for more details.") - ENDIF(Qt4_FIND_REQUIRED) - ENDIF( NOT QT_QTCORE_LIBRARY_DEBUG AND NOT QT_QTCORE_LIBRARY_RELEASE ) - # Set QT_QTDESIGNERCOMPONENTS_LIBRARY - FIND_LIBRARY(QT_QTDESIGNERCOMPONENTS_LIBRARY_RELEASE NAMES QtDesignerComponents${QT_LIBINFIX} QtDesignerComponents${QT_LIBINFIX}4 PATHS ${QT_LIBRARY_DIR} NO_DEFAULT_PATH) + FIND_LIBRARY(QT_QTDESIGNERCOMPONENTS_LIBRARY_RELEASE NAMES QtDesignerComponents${QT_LIBINFIX} QtDesignerComponents${QT_LIBINFIX}4 PATHS ${QT_LIBRARY_DIR} NO_DEFAULT_PATH) FIND_LIBRARY(QT_QTDESIGNERCOMPONENTS_LIBRARY_DEBUG NAMES QtDesignerComponents${QT_LIBINFIX}_debug QtDesignerComponents${QT_LIBINFIX}d QtDesignerComponents${QT_LIBINFIX}d4 PATHS ${QT_LIBRARY_DIR} NO_DEFAULT_PATH) # Set QT_QTMAIN_LIBRARY - IF(WIN32) - FIND_LIBRARY(QT_QTMAIN_LIBRARY_RELEASE NAMES qtmain${QT_LIBINFIX} PATHS ${QT_LIBRARY_DIR} - NO_DEFAULT_PATH) - FIND_LIBRARY(QT_QTMAIN_LIBRARY_DEBUG NAMES qtmain${QT_LIBINFIX}d PATHS ${QT_LIBRARY_DIR} - NO_DEFAULT_PATH) - ENDIF(WIN32) + IF(Q_WS_WIN) + FIND_LIBRARY(QT_QTMAIN_LIBRARY_RELEASE NAMES qtmain${QT_LIBINFIX} PATHS ${QT_LIBRARY_DIR} NO_DEFAULT_PATH) + FIND_LIBRARY(QT_QTMAIN_LIBRARY_DEBUG NAMES qtmain${QT_LIBINFIX}d PATHS ${QT_LIBRARY_DIR} NO_DEFAULT_PATH) + ENDIF(Q_WS_WIN) # Set QT_QTASSISTANTCLIENT_LIBRARY - FIND_LIBRARY(QT_QTASSISTANTCLIENT_LIBRARY_RELEASE NAMES QtAssistantClient${QT_LIBINFIX} QtAssistantClient${QT_LIBINFIX}4 PATHS ${QT_LIBRARY_DIR} NO_DEFAULT_PATH) - FIND_LIBRARY(QT_QTASSISTANTCLIENT_LIBRARY_DEBUG NAMES QtAssistantClient${QT_LIBINFIX}_debug QtAssistantClient${QT_LIBINFIX}d QtAssistantClient${QT_LIBINFIX}d4 PATHS ${QT_LIBRARY_DIR} NO_DEFAULT_PATH) + FIND_LIBRARY(QT_QTASSISTANTCLIENT_LIBRARY_RELEASE NAMES QtAssistantClient${QT_LIBINFIX} QtAssistantClient${QT_LIBINFIX}4 PATHS ${QT_LIBRARY_DIR} NO_DEFAULT_PATH) + FIND_LIBRARY(QT_QTASSISTANTCLIENT_LIBRARY_DEBUG NAMES QtAssistantClient${QT_LIBINFIX}_debug QtAssistantClient${QT_LIBINFIX}d QtAssistantClient${QT_LIBINFIX}d4 PATHS ${QT_LIBRARY_DIR} NO_DEFAULT_PATH) # Set QT_QTASSISTANT_LIBRARY - FIND_LIBRARY(QT_QTASSISTANT_LIBRARY_RELEASE NAMES QtAssistantClient${QT_LIBINFIX} QtAssistantClient${QT_LIBINFIX}4 QtAssistant${QT_LIBINFIX} QtAssistant${QT_LIBINFIX}4 PATHS ${QT_LIBRARY_DIR} NO_DEFAULT_PATH) + FIND_LIBRARY(QT_QTASSISTANT_LIBRARY_RELEASE NAMES QtAssistantClient${QT_LIBINFIX} QtAssistantClient${QT_LIBINFIX}4 QtAssistant${QT_LIBINFIX} QtAssistant${QT_LIBINFIX}4 PATHS ${QT_LIBRARY_DIR} NO_DEFAULT_PATH) FIND_LIBRARY(QT_QTASSISTANT_LIBRARY_DEBUG NAMES QtAssistantClient${QT_LIBINFIX}_debug QtAssistantClient${QT_LIBINFIX}d QtAssistantClient${QT_LIBINFIX}d4 QtAssistant${QT_LIBINFIX}_debug QtAssistant${QT_LIBINFIX}d4 PATHS ${QT_LIBRARY_DIR} NO_DEFAULT_PATH) # Set QT_QTHELP_LIBRARY - FIND_LIBRARY(QT_QTCLUCENE_LIBRARY_RELEASE NAMES QtCLucene${QT_LIBINFIX} QtCLucene${QT_LIBINFIX}4 PATHS ${QT_LIBRARY_DIR} NO_DEFAULT_PATH) + FIND_LIBRARY(QT_QTCLUCENE_LIBRARY_RELEASE NAMES QtCLucene${QT_LIBINFIX} QtCLucene${QT_LIBINFIX}4 PATHS ${QT_LIBRARY_DIR} NO_DEFAULT_PATH) FIND_LIBRARY(QT_QTCLUCENE_LIBRARY_DEBUG NAMES QtCLucene${QT_LIBINFIX}_debug QtCLucene${QT_LIBINFIX}d QtCLucene${QT_LIBINFIX}d4 PATHS ${QT_LIBRARY_DIR} NO_DEFAULT_PATH) - # QtCLucene not with other frameworks with binary installation (in /usr/lib) IF(Q_WS_MAC AND QT_QTCORE_LIBRARY_RELEASE AND NOT QT_QTCLUCENE_LIBRARY_RELEASE) FIND_LIBRARY(QT_QTCLUCENE_LIBRARY_RELEASE NAMES QtCLucene${QT_LIBINFIX} PATHS ${QT_LIBRARY_DIR}) ENDIF(Q_WS_MAC AND QT_QTCORE_LIBRARY_RELEASE AND NOT QT_QTCLUCENE_LIBRARY_RELEASE) + ############################################ # # Check the existence of the libraries. @@ -835,137 +932,23 @@ IF (QT4_QMAKE_FOUND) ENDIF(QT_USE_FRAMEWORKS) - MACRO (_QT4_ADJUST_LIB_VARS _camelCaseBasename) - - STRING(TOUPPER "${_camelCaseBasename}" basename) - - # The name of the imported targets, i.e. the prefix "Qt4::" must not change, - # since it is stored in EXPORT-files as name of a required library. If the name would change - # here, this would lead to the imported Qt4-library targets not being resolved by cmake anymore. - IF (QT_${basename}_LIBRARY_RELEASE OR QT_${basename}_LIBRARY_DEBUG) - - IF(NOT TARGET Qt4::${_camelCaseBasename}) - ADD_LIBRARY(Qt4::${_camelCaseBasename} UNKNOWN IMPORTED ) - - IF (QT_${basename}_LIBRARY_RELEASE) - SET_PROPERTY(TARGET Qt4::${_camelCaseBasename} APPEND PROPERTY IMPORTED_CONFIGURATIONS RELEASE) - SET_PROPERTY(TARGET Qt4::${_camelCaseBasename} PROPERTY IMPORTED_LOCATION_RELEASE "${QT_${basename}_LIBRARY_RELEASE}" ) - ENDIF (QT_${basename}_LIBRARY_RELEASE) - - IF (QT_${basename}_LIBRARY_DEBUG) - SET_PROPERTY(TARGET Qt4::${_camelCaseBasename} APPEND PROPERTY IMPORTED_CONFIGURATIONS DEBUG) - SET_PROPERTY(TARGET Qt4::${_camelCaseBasename} PROPERTY IMPORTED_LOCATION_DEBUG "${QT_${basename}_LIBRARY_DEBUG}" ) - ENDIF (QT_${basename}_LIBRARY_DEBUG) - ENDIF(NOT TARGET Qt4::${_camelCaseBasename}) - - # If QT_USE_IMPORTED_TARGETS is enabled, the QT_QTFOO_LIBRARY variables are set to point at these - # imported targets. This works better in general, and is also in almost all cases fully - # backward compatible. The only issue is when a project A which had this enabled then exports its - # libraries via export or EXPORT_LIBRARY_DEPENDENCIES(). In this case the libraries from project - # A will depend on the imported Qt targets, and the names of these imported targets will be stored - # in the dependency files on disk. This means when a project B then uses project A, these imported - # targets must be created again, otherwise e.g. "Qt4__QtCore" will be interpreted as name of a - # library file on disk, and not as a target, and linking will fail: - IF(QT_USE_IMPORTED_TARGETS) - SET(QT_${basename}_LIBRARY Qt4::${_camelCaseBasename} ) - SET(QT_${basename}_LIBRARIES Qt4::${_camelCaseBasename} ) - ELSE(QT_USE_IMPORTED_TARGETS) - - # if the release- as well as the debug-version of the library have been found: - IF (QT_${basename}_LIBRARY_DEBUG AND QT_${basename}_LIBRARY_RELEASE) - # if the generator supports configuration types then set - # optimized and debug libraries, or if the CMAKE_BUILD_TYPE has a value - IF (CMAKE_CONFIGURATION_TYPES OR CMAKE_BUILD_TYPE) - SET(QT_${basename}_LIBRARY optimized ${QT_${basename}_LIBRARY_RELEASE} debug ${QT_${basename}_LIBRARY_DEBUG}) - ELSE(CMAKE_CONFIGURATION_TYPES OR CMAKE_BUILD_TYPE) - # if there are no configuration types and CMAKE_BUILD_TYPE has no value - # then just use the release libraries - SET(QT_${basename}_LIBRARY ${QT_${basename}_LIBRARY_RELEASE} ) - ENDIF(CMAKE_CONFIGURATION_TYPES OR CMAKE_BUILD_TYPE) - SET(QT_${basename}_LIBRARIES optimized ${QT_${basename}_LIBRARY_RELEASE} debug ${QT_${basename}_LIBRARY_DEBUG}) - ENDIF (QT_${basename}_LIBRARY_DEBUG AND QT_${basename}_LIBRARY_RELEASE) - - # if only the release version was found, set the debug variable also to the release version - IF (QT_${basename}_LIBRARY_RELEASE AND NOT QT_${basename}_LIBRARY_DEBUG) - SET(QT_${basename}_LIBRARY_DEBUG ${QT_${basename}_LIBRARY_RELEASE}) - SET(QT_${basename}_LIBRARY ${QT_${basename}_LIBRARY_RELEASE}) - SET(QT_${basename}_LIBRARIES ${QT_${basename}_LIBRARY_RELEASE}) - ENDIF (QT_${basename}_LIBRARY_RELEASE AND NOT QT_${basename}_LIBRARY_DEBUG) - - # if only the debug version was found, set the release variable also to the debug version - IF (QT_${basename}_LIBRARY_DEBUG AND NOT QT_${basename}_LIBRARY_RELEASE) - SET(QT_${basename}_LIBRARY_RELEASE ${QT_${basename}_LIBRARY_DEBUG}) - SET(QT_${basename}_LIBRARY ${QT_${basename}_LIBRARY_DEBUG}) - SET(QT_${basename}_LIBRARIES ${QT_${basename}_LIBRARY_DEBUG}) - ENDIF (QT_${basename}_LIBRARY_DEBUG AND NOT QT_${basename}_LIBRARY_RELEASE) - - # put the value in the cache: - SET(QT_${basename}_LIBRARY ${QT_${basename}_LIBRARY} CACHE STRING "The Qt ${basename} library" FORCE) - - ENDIF(QT_USE_IMPORTED_TARGETS) - -# message(STATUS "QT_${basename}_LIBRARY: ${QT_${basename}_LIBRARY}") - - SET(QT_${basename}_FOUND 1) - - ENDIF (QT_${basename}_LIBRARY_RELEASE OR QT_${basename}_LIBRARY_DEBUG) - - IF (QT_${basename}_INCLUDE_DIR) - #add the include directory to QT_INCLUDES - SET(QT_INCLUDES "${QT_${basename}_INCLUDE_DIR}" ${QT_INCLUDES}) - ENDIF (QT_${basename}_INCLUDE_DIR) - - # Make variables changeble to the advanced user - MARK_AS_ADVANCED(QT_${basename}_LIBRARY QT_${basename}_LIBRARY_RELEASE QT_${basename}_LIBRARY_DEBUG QT_${basename}_INCLUDE_DIR) - ENDMACRO (_QT4_ADJUST_LIB_VARS) - - # Set QT_xyz_LIBRARY variable and add # library include path to QT_INCLUDES - _QT4_ADJUST_LIB_VARS(QtCore) - _QT4_ADJUST_LIB_VARS(QtGui) - _QT4_ADJUST_LIB_VARS(Qt3Support) + FOREACH(QT_MODULE ${QT_MODULES}) + _QT4_ADJUST_LIB_VARS(${QT_MODULE}) + ENDFOREACH(QT_MODULE) + _QT4_ADJUST_LIB_VARS(QtAssistant) _QT4_ADJUST_LIB_VARS(QtAssistantClient) _QT4_ADJUST_LIB_VARS(QtCLucene) - _QT4_ADJUST_LIB_VARS(QtDBus) - _QT4_ADJUST_LIB_VARS(QtDeclarative) - _QT4_ADJUST_LIB_VARS(QtDesigner) _QT4_ADJUST_LIB_VARS(QtDesignerComponents) - _QT4_ADJUST_LIB_VARS(QtHelp) - _QT4_ADJUST_LIB_VARS(QtMultimedia) - _QT4_ADJUST_LIB_VARS(QtNetwork) - _QT4_ADJUST_LIB_VARS(QtNsPlugin) - _QT4_ADJUST_LIB_VARS(QtOpenGL) - _QT4_ADJUST_LIB_VARS(QtScript) - _QT4_ADJUST_LIB_VARS(QtScriptTools) - _QT4_ADJUST_LIB_VARS(QtSql) - _QT4_ADJUST_LIB_VARS(QtSvg) - _QT4_ADJUST_LIB_VARS(QtTest) - _QT4_ADJUST_LIB_VARS(QtUiTools) - _QT4_ADJUST_LIB_VARS(QtWebKit) - _QT4_ADJUST_LIB_VARS(QtXml) - _QT4_ADJUST_LIB_VARS(QtXmlPatterns) - _QT4_ADJUST_LIB_VARS(phonon) # platform dependent libraries - IF(Q_WS_X11) - _QT4_ADJUST_LIB_VARS(QtMotif) - ENDIF(Q_WS_X11) - IF(WIN32) + IF(Q_WS_WIN) _QT4_ADJUST_LIB_VARS(qtmain) _QT4_ADJUST_LIB_VARS(QAxServer) _QT4_ADJUST_LIB_VARS(QAxContainer) - ENDIF(WIN32) - - # If Qt is installed as a framework, we need to add QT_QTCORE_LIBRARY here (which - # is the framework directory in that case), since this will make the cmake include_directories() - # command recognize that we need the framework flag with the respective directory (-F) - IF(QT_USE_FRAMEWORKS) - SET(QT_INCLUDES ${QT_INCLUDES} ${QT_QTCORE_LIBRARY} ) - SET(QT_INCLUDE_DIR ${QT_INCLUDE_DIR} ${QT_QTCORE_LIBRARY} ) - ENDIF(QT_USE_FRAMEWORKS) - + ENDIF(Q_WS_WIN) ####################################### diff --git a/Modules/Qt4ConfigDependentSettings.cmake b/Modules/Qt4ConfigDependentSettings.cmake index 51d5fd9..2e03716 100644 --- a/Modules/Qt4ConfigDependentSettings.cmake +++ b/Modules/Qt4ConfigDependentSettings.cmake @@ -34,12 +34,12 @@ SET(QT_QTDBUS_LIB_DEPENDENCIES "") SET(QT_QTHELP_LIB_DEPENDENCIES ${QT_QTCLUCENE_LIBRARY}) -IF(WIN32) +IF(Q_WS_WIN) # On Windows, qconfig.pri has "static" for static library builds IF(QT_CONFIG MATCHES "static") SET(QT_IS_STATIC 1) ENDIF(QT_CONFIG MATCHES "static") -ELSE(WIN32) +ELSE(Q_WS_WIN) # On other platforms, check file extension to know if its static IF(QT_QTCORE_LIBRARY_RELEASE) GET_FILENAME_COMPONENT(qtcore_lib_ext "${QT_QTCORE_LIBRARY_RELEASE}" EXT) @@ -53,12 +53,12 @@ ELSE(WIN32) SET(QT_IS_STATIC 1) ENDIF(${qtcore_lib_ext} STREQUAL ${CMAKE_STATIC_LIBRARY_SUFFIX}) ENDIF(QT_QTCORE_LIBRARY_DEBUG) -ENDIF(WIN32) +ENDIF(Q_WS_WIN) # build using shared Qt needs -DQT_DLL on Windows -IF(WIN32 AND NOT QT_IS_STATIC) +IF(Q_WS_WIN AND NOT QT_IS_STATIC) SET(QT_DEFINITIONS ${QT_DEFINITIONS} -DQT_DLL) -ENDIF(WIN32 AND NOT QT_IS_STATIC) +ENDIF(Q_WS_WIN AND NOT QT_IS_STATIC) IF(NOT QT_IS_STATIC) RETURN() diff --git a/Modules/UseQt4.cmake b/Modules/UseQt4.cmake index 63a0919..ea0ab95 100644 --- a/Modules/UseQt4.cmake +++ b/Modules/UseQt4.cmake @@ -27,9 +27,9 @@ INCLUDE_DIRECTORIES(${QT_INCLUDE_DIR}) SET(QT_LIBRARIES "") IF (QT_USE_QTMAIN) - IF (WIN32) + IF (Q_WS_WIN) SET(QT_LIBRARIES ${QT_LIBRARIES} ${QT_QTMAIN_LIBRARY}) - ENDIF (WIN32) + ENDIF (Q_WS_WIN) ENDIF (QT_USE_QTMAIN) IF(QT_DONT_USE_QTGUI) |