diff options
34 files changed, 381 insertions, 122 deletions
diff --git a/Help/command/find_package.rst b/Help/command/find_package.rst index b486b79..3ad571c 100644 --- a/Help/command/find_package.rst +++ b/Help/command/find_package.rst @@ -1,7 +1,16 @@ find_package ------------ -Load settings for an external project. +.. only:: html + + .. contents:: + +Find an external project, and load its settings. + +.. _`basic signature`: + +Basic Signature and Module Mode +^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ :: @@ -15,7 +24,6 @@ will be set to indicate whether the package was found. When the package is found package-specific information is provided through variables and :ref:`Imported Targets` documented by the package itself. The ``QUIET`` option disables messages if the package cannot be found. The -``MODULE`` option disables the second signature documented below. The ``REQUIRED`` option stops processing with an error message if the package cannot be found. @@ -33,25 +41,32 @@ should be compatible (format is ``major[.minor[.patch[.tweak]]]``). The inside a find-module, the corresponding arguments are forwarded automatically from the outer call (including the ``EXACT`` flag for ``[version]``). Version support is currently provided only on a -package-by-package basis (details below). +package-by-package basis (see the `Version Selection`_ section below). -User code should generally look for packages using the above simple -signature. The remainder of this command documentation specifies the +See the :command:`cmake_policy` command documentation for discussion +of the ``NO_POLICY_SCOPE`` option. + +The command has two modes by which it searches for packages: "Module" +mode and "Config" mode. The above signature selects Module mode. +If no module is found the command falls back to Config mode, described +below. This fall back is disabled if the ``MODULE`` option is given. + +In Module mode, CMake searches for a file called ``Find<PackageName>.cmake`` +in the :variable:`CMAKE_MODULE_PATH` followed by the CMake installation. +If the file is found, it is read and processed by CMake. It is responsible +for finding the package, checking the version, and producing any needed +messages. Some find-modules provide limited or no support for versioning; +check the module documentation. + +Full Signature and Config Mode +^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ + +User code should generally look for packages using the above `basic +signature`_. The remainder of this command documentation specifies the full command signature and details of the search process. Project maintainers wishing to provide a package to be found by this command are encouraged to read on. -The command has two modes by which it searches for packages: "Module" -mode and "Config" mode. Module mode is available when the command is -invoked with the above reduced signature. CMake searches for a file -called ``Find<PackageName>.cmake`` in the :variable:`CMAKE_MODULE_PATH` -followed by the CMake installation. If the file is found, it is read -and processed by CMake. It is responsible for finding the package, -checking the version, and producing any needed messages. Many -find-modules provide limited or no support for versioning; check -the module documentation. If no module is found and the ``MODULE`` -option is not given the command proceeds to Config mode. - The complete Config mode command signature is:: find_package(<PackageName> [version] [EXACT] [QUIET] @@ -76,12 +91,12 @@ The complete Config mode command signature is:: ONLY_CMAKE_FIND_ROOT_PATH | NO_CMAKE_FIND_ROOT_PATH]) -The ``CONFIG`` option may be used to skip Module mode explicitly and -switch to Config mode. It is synonymous to using ``NO_MODULE``. Config -mode is also implied by use of options not specified in the reduced -signature. +The ``CONFIG`` option, the synonymous ``NO_MODULE`` option, or the use +of options not specified in the `basic signature`_ all enforce pure Config +mode. In pure Config mode, the command skips Module mode search and +proceeds at once with Config mode search. -Config mode attempts to locate a configuration file provided by the +Config mode search attempts to locate a configuration file provided by the package to be found. A cache entry called ``<PackageName>_DIR`` is created to hold the directory containing the file. By default the command searches for a package with the name ``<PackageName>``. If the ``NAMES`` option @@ -107,6 +122,13 @@ fatal error is generated and the configure step stops executing. If ``<PackageName>_DIR`` has been set to a directory not containing a configuration file CMake will ignore it and search from scratch. +Package maintainers providing CMake package configuration files are +encouraged to name and install them such that the `Search Procedure`_ +outlined below will find them without requiring use of additional options. + +Version Selection +^^^^^^^^^^^^^^^^^ + When the ``[version]`` argument is given Config mode will only find a version of the package that claims compatibility with the requested version (format is ``major[.minor[.patch[.tweak]]]``). If the ``EXACT`` @@ -187,17 +209,8 @@ For instance in order to select the highest version one can set:: before calling ``find_package``. -Config mode provides an elaborate interface and search procedure. -Much of the interface is provided for completeness and for use -internally by find-modules loaded by Module mode. Most user code -should simply call:: - - find_package(<PackageName> [major[.minor]] [EXACT] [REQUIRED|QUIET]) - -in order to find a package. Package maintainers providing CMake -package configuration files are encouraged to name and install them -such that the procedure outlined below will find them without -requiring use of additional options. +Search Procedure +^^^^^^^^^^^^^^^^ CMake constructs a set of possible installation prefixes for the package. Under each prefix several directories are searched for a @@ -339,6 +352,9 @@ enabled. Every non-REQUIRED ``find_package`` call can be disabled by setting the :variable:`CMAKE_DISABLE_FIND_PACKAGE_<PackageName>` variable to ``TRUE``. +Package File Interface Variables +^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ + When loading a find module or package configuration file ``find_package`` defines variables to provide information about the call arguments (and restores their original state before returning): @@ -377,6 +393,3 @@ configuration file to handle components in a way that makes sense for the package. The package configuration file may set ``<PackageName>_FOUND`` to false to tell ``find_package`` that component requirements are not satisfied. - -See the :command:`cmake_policy` command documentation for discussion -of the ``NO_POLICY_SCOPE`` option. diff --git a/Help/command/list.rst b/Help/command/list.rst index ad2c428..2357a9b 100644 --- a/Help/command/list.rst +++ b/Help/command/list.rst @@ -256,20 +256,24 @@ Reverses the contents of the list in-place. list(SORT <list> [COMPARE <compare>] [CASE <case>] [ORDER <order>]) Sorts the list in-place alphabetically. -Use the option ``<compare>`` to select the compare type for sorting. -The ``<compare>`` option may be one of: +Use the ``COMPARE`` keyword to select the comparison method for sorting. +The ``<compare>`` option should be one of: -* ``STRING``: Sorts a list of strings alphabetically. -* ``FILE_BASENAME``: Sort a list of pathnames of files by their basenames. +* ``STRING``: Sorts a list of strings alphabetically. This is the + default behavior if the ``COMPARE`` option is not given. +* ``FILE_BASENAME``: Sorts a list of pathnames of files by their basenames. -Use the option ``<case>`` to select a case sensitive or case insensitive sort mode. -The ``<case>`` option may be one of: +Use the ``CASE`` keyword to select a case sensitive or case insensitive +sort mode. The ``<case>`` option should be one of: -* ``SENSITIVE``: Sorts the list alphabetically. -* ``INSENSITIVE``: Sorts the list alphabetically in descending order. +* ``SENSITIVE``: List items are sorted in a case-sensitive manner. This is + the default behavior if the ``CASE`` option is not given. +* ``INSENSITIVE``: List items are sorted case insensitively. The order of + items which differ only by upper/lowercase is not specified. -Use the option ``<order>`` to select a case sensitive or case insensitive sort mode. -The ``<order>`` option may be one of: +To control the sort order, the ``ORDER`` keyword can be given. +The ``<order>`` option should be one of: -* ``ASCENDING``: Sorts the list in ascending order. +* ``ASCENDING``: Sorts the list in ascending order. This is the default + behavior when the ``ORDER`` option is not given. * ``DESCENDING``: Sorts the list in descending order. diff --git a/Help/command/project.rst b/Help/command/project.rst index c1de057..bd8b4ef 100644 --- a/Help/command/project.rst +++ b/Help/command/project.rst @@ -44,6 +44,7 @@ Variables corresponding to unspecified versions are set to the empty string If the optional ``DESCRIPTION`` is given, then :variable:`PROJECT_DESCRIPTION` and :variable:`<PROJECT-NAME>_DESCRIPTION` will be set to its argument. +These variables will be cleared if ``DESCRIPTION`` is not given. The description is expected to be a relatively short string, usually no more than a few words. @@ -51,6 +52,7 @@ The optional ``HOMEPAGE_URL`` sets the analogous variables :variable:`PROJECT_HOMEPAGE_URL` and :variable:`<PROJECT-NAME>_HOMEPAGE_URL`. When this option is given, the URL provided should be the canonical home for the project. +These variables will be cleared if ``HOMEPAGE_URL`` is not given. Note that the description and homepage URL may be used as defaults for things like packaging meta-data, documentation, etc. diff --git a/Help/command/target_link_libraries.rst b/Help/command/target_link_libraries.rst index e1c374e..229d10c 100644 --- a/Help/command/target_link_libraries.rst +++ b/Help/command/target_link_libraries.rst @@ -78,6 +78,20 @@ Each ``<item>`` may be: flags explicitly. The flags will then be placed at the toolchain-defined flag position in the link command. +* **A generator expression**: A ``$<...>`` :manual:`generator expression + <cmake-generator-expressions(7)>` may evaluate to any of the above + items or to a :ref:`;-list <CMake Language Lists>` of them. + If the ``...`` contains any ``;`` characters, e.g. after evaluation + of a ``${list}`` variable, be sure to use an explicitly quoted + argument ``"$<...>"`` so that this command receives it as a + single ``<item>``. + + Additionally, a generator expression may be used as a fragment of + any of the above items, e.g. ``foo$<1:_d>``. + + Note that generator expressions will not be used in OLD handling of + policy :policy:`CMP0003` or policy :policy:`CMP0004`. + * A ``debug``, ``optimized``, or ``general`` keyword immediately followed by another ``<item>``. The item following such a keyword will be used only for the corresponding build configuration. The ``debug`` keyword @@ -88,18 +102,16 @@ Each ``<item>`` may be: optional. Higher granularity may be achieved for per-configuration rules by creating and linking to :ref:`IMPORTED library targets <Imported Targets>`. + These keywords are interpreted immediately by this command and therefore + have no special meaning when produced by a generator expression. Items containing ``::``, such as ``Foo::Bar``, are assumed to be :ref:`IMPORTED <Imported Targets>` or :ref:`ALIAS <Alias Targets>` library target names and will cause an error if no such target exists. See policy :policy:`CMP0028`. -Arguments to ``target_link_libraries`` may use "generator expressions" -with the syntax ``$<...>``. Note however, that generator expressions -will not be used in OLD handling of :policy:`CMP0003` or :policy:`CMP0004`. -See the :manual:`cmake-generator-expressions(7)` manual for available -expressions. See the :manual:`cmake-buildsystem(7)` manual for more on -defining buildsystem properties. +See the :manual:`cmake-buildsystem(7)` manual for more on defining +buildsystem properties. Libraries for a Target and/or its Dependents ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ diff --git a/Help/envvar/CTEST_PROGRESS_OUTPUT.rst b/Help/envvar/CTEST_PROGRESS_OUTPUT.rst new file mode 100644 index 0000000..a8e15bc --- /dev/null +++ b/Help/envvar/CTEST_PROGRESS_OUTPUT.rst @@ -0,0 +1,14 @@ +CTEST_PROGRESS_OUTPUT +--------------------- + +Boolean environment variable that affects how :manual:`ctest <ctest(1)>` +command output reports overall progress. When set to 1, TRUE, ON or anything +else that evaluates to boolean true, progress is reported by repeatedly +updating the same line. This greatly reduces the overall verbosity, but is +only supported when output is sent directly to a terminal. If the environment +variable is not set or has a value that evaluates to false, output is reported +normally with each test having its own start and end lines logged to the +output. + +The ``--progress`` option to :manual:`ctest <ctest(1)>` overrides this +environment variable if both are given. diff --git a/Help/manual/cmake-env-variables.7.rst b/Help/manual/cmake-env-variables.7.rst index 42aeabc..31aa723 100644 --- a/Help/manual/cmake-env-variables.7.rst +++ b/Help/manual/cmake-env-variables.7.rst @@ -53,5 +53,6 @@ Environment Variables for CTest /envvar/CTEST_INTERACTIVE_DEBUG_MODE /envvar/CTEST_OUTPUT_ON_FAILURE /envvar/CTEST_PARALLEL_LEVEL + /envvar/CTEST_PROGRESS_OUTPUT /envvar/CTEST_USE_LAUNCHERS_DEFAULT /envvar/DASHBOARD_TEST_FROM_CTEST diff --git a/Help/manual/ctest.1.rst b/Help/manual/ctest.1.rst index 9553d15..e24b10d 100644 --- a/Help/manual/ctest.1.rst +++ b/Help/manual/ctest.1.rst @@ -35,6 +35,19 @@ Options which one should be tested. Example configurations are "Debug" and "Release". +``--progress`` + Enable short progress output from tests. + + When the output of ``ctest`` is being sent directly to a terminal, the + progress through the set of tests is reported by updating the same line + rather than printing start and end messages for each test on new lines. + This can significantly reduce the verbosity of the test output. + Test completion messages are still output on their own line for failed + tests and the final test summary will also still be logged. + + This option can also be enabled by setting the environment variable + :envvar:`CTEST_PROGRESS_OUTPUT`. + ``-V,--verbose`` Enable verbose output from tests. @@ -55,8 +68,8 @@ Options ``--output-on-failure`` Output anything outputted by the test program if the test should fail. - This option can also be enabled by setting the environment variable - ``CTEST_OUTPUT_ON_FAILURE``. + This option can also be enabled by setting the + :envvar:`CTEST_OUTPUT_ON_FAILURE` environment variable ``-F`` Enable failover. @@ -70,7 +83,7 @@ Options This option tells CTest to run the tests in parallel using given number of jobs. This option can also be set by setting the - environment variable ``CTEST_PARALLEL_LEVEL``. + :envvar:`CTEST_PARALLEL_LEVEL` environment variable. This option can be used with the :prop_test:`PROCESSORS` test property. @@ -867,7 +880,7 @@ Configuration settings include: * `CTest Script`_ variable: :variable:`CTEST_CONFIGURATION_TYPE` * :module:`CTest` module variable: ``DEFAULT_CTEST_CONFIGURATION_TYPE``, - initialized by the ``CMAKE_CONFIG_TYPE`` environment variable + initialized by the :envvar:`CMAKE_CONFIG_TYPE` environment variable ``LabelsForSubprojects`` Specify a semicolon-separated list of labels that will be treated as diff --git a/Help/policy/CMP0077.rst b/Help/policy/CMP0077.rst index 8efe198..44797b6 100644 --- a/Help/policy/CMP0077.rst +++ b/Help/policy/CMP0077.rst @@ -3,10 +3,46 @@ CMP0077 :command:`option` honors normal variables. -The ``OLD`` behavior for this policy is to clear any existing normal variables -with the same name. The ``NEW`` behavior for this policy is to not create -a cache entry or modify any existing normal variables if a normal variable -with the same name already exists. +The :command:`option` command is typically used to create a cache entry +to allow users to set the option. However, there are cases in which a +normal (non-cached) variable of the same name as the option may be +defined by the project prior to calling the :command:`option` command. +For example, a project that embeds another project as a subdirectory +may want to hard-code options of the subproject to build the way it needs. + +For historical reasons in CMake 3.12 and below the :command:`option` +command *removes* a normal (non-cached) variable of the same name when: + +* a cache entry of the specified name does not exist at all, or +* a cache entry of the specified name exists but has not been given + a type (e.g. via ``-D<name>=ON`` on the command line). + +In both of these cases (typically on the first run in a new build tree), +the :command:`option` command gives the cache entry type ``BOOL`` and +removes any normal (non-cached) variable of the same name. In the +remaining case that the cache entry of the specified name already +exists and has a type (typically on later runs in a build tree), the +:command:`option` command changes nothing and any normal variable of +the same name remains set. + +In CMake 3.13 and above the :command:`option` command prefers to +do nothing when a normal variable of the given name already exists. +It does not create or update a cache entry or remove the normal variable. +The new behavior is consistent between the first and later runs in a +build tree. This policy provides compatibility with projects that have +not been updated to expect the new behavior. + +When the :command:`option` command sees a normal variable of the given +name: + +* The ``OLD`` behavior for this policy is to proceed even when a normal + variable of the same name exists. If the cache entry does not already + exist and have a type then it is created and/or given a type and the + normal variable is removed. + +* The ``NEW`` behavior for this policy is to do nothing when a normal + variable of the same name exists. The normal variable is not removed. + The cache entry is not created or updated and is ignored if it exists. This policy was introduced in CMake version 3.13. CMake version |release| warns when the policy is not set and uses ``OLD`` behavior. diff --git a/Help/release/3.13.rst b/Help/release/3.13.rst index b08f21d..b993775 100644 --- a/Help/release/3.13.rst +++ b/Help/release/3.13.rst @@ -20,7 +20,7 @@ Generators * The :generator:`Xcode` generator learned to configure more Xcode Scheme fields. See the :variable:`CMAKE_XCODE_GENERATE_SCHEME` variable. -* The :generator:`Green Hills MULTI` generator has been udpated: +* The :generator:`Green Hills MULTI` generator has been updated: - Added support for architecture selection through :variable:`CMAKE_GENERATOR_PLATFORM`: @@ -157,6 +157,10 @@ Modules * The :module:`FindPkgConfig` module gained an option to create imported targets in global scope. +* The :module:`FindPkgConfig` module gained support for ``<`` and ``>`` + operators for version checks in addition to the already supported + operators ``>=``, ``<=``, and ``=``. + * Modules :module:`FindPython3`, :module:`FindPython2` and :module:`FindPython` gain capability to control order of resource lookup on macOS (Framework) and Windows (Registry). @@ -203,8 +207,10 @@ Deprecated and Removed Features Other Changes ============= -* The :command:`option` command now honors existing normal variables instead - of replacing them with a cache entry. See policy :policy:`CMP0077`. +* The :command:`option` command now honors an existing normal variable + of the same name and does nothing instead of possibly creating a cache + entry (or setting its type) and removing the normal variable. + See policy :policy:`CMP0077`. * The :ref:`Makefile Generators` learned to remove custom command and custom target byproducts during ``make clean``. diff --git a/Help/release/dev/0-sample-topic.rst b/Help/release/dev/0-sample-topic.rst deleted file mode 100644 index e4cc01e..0000000 --- a/Help/release/dev/0-sample-topic.rst +++ /dev/null @@ -1,7 +0,0 @@ -0-sample-topic --------------- - -* This is a sample release note for the change in a topic. - Developers should add similar notes for each topic branch - making a noteworthy change. Each document should be named - and titled to match the topic name to avoid merge conflicts. diff --git a/Help/release/index.rst b/Help/release/index.rst index 7ef3a8e..fbe4cf6 100644 --- a/Help/release/index.rst +++ b/Help/release/index.rst @@ -7,8 +7,6 @@ CMake Release Notes This file should include the adjacent "dev.txt" file in development versions but not in release versions. -.. include:: dev.txt - Releases ======== diff --git a/Help/variable/CMAKE_OSX_VARIABLE.txt b/Help/variable/CMAKE_OSX_VARIABLE.txt index 5b84726..16f3c1a 100644 --- a/Help/variable/CMAKE_OSX_VARIABLE.txt +++ b/Help/variable/CMAKE_OSX_VARIABLE.txt @@ -2,6 +2,8 @@ The value of this variable should be set prior to the first :command:`project` or :command:`enable_language` command invocation because it may influence configuration of the toolchain and flags. It is intended to be set locally by the user creating a build tree. +This variable should be set as a ``CACHE`` entry (or else CMake may +remove it while initializing a cache entry of the same name). Despite the ``OSX`` part in the variable name(s) they apply also to other SDKs than macOS like iOS, tvOS, or watchOS. diff --git a/Modules/Compiler/Clang.cmake b/Modules/Compiler/Clang.cmake index 1653b55..e23470b 100644 --- a/Modules/Compiler/Clang.cmake +++ b/Modules/Compiler/Clang.cmake @@ -33,6 +33,14 @@ else() set(CMAKE_${lang}_LINKER_WRAPPER_FLAG "-Xlinker" " ") set(CMAKE_${lang}_LINKER_WRAPPER_FLAG_SEP) + if(CMAKE_${lang}_COMPILER_TARGET) + if(CMAKE_${lang}_COMPILER_VERSION VERSION_LESS 3.4.0) + list(APPEND CMAKE_${lang}_COMPILER_PREDEFINES_COMMAND "-target" "${CMAKE_${lang}_COMPILER_TARGET}") + else() + list(APPEND CMAKE_${lang}_COMPILER_PREDEFINES_COMMAND "--target=${CMAKE_${lang}_COMPILER_TARGET}") + endif() + endif() + set(_CMAKE_${lang}_IPO_SUPPORTED_BY_CMAKE YES) set(_CMAKE_${lang}_IPO_MAY_BE_SUPPORTED_BY_COMPILER YES) diff --git a/Modules/FindBLAS.cmake b/Modules/FindBLAS.cmake index 39b9b74..e955bc2 100644 --- a/Modules/FindBLAS.cmake +++ b/Modules/FindBLAS.cmake @@ -53,8 +53,10 @@ # * SGIMATH # * IBMESSL # * Intel10_32 (intel mkl v10 32 bit) -# * Intel10_64lp (intel mkl v10 64 bit, lp thread model, lp64 model) -# * Intel10_64lp_seq (intel mkl v10 64 bit, sequential code, lp64 model) +# * Intel10_64lp (intel mkl v10+ 64 bit, threaded code, lp64 model) +# * Intel10_64lp_seq (intel mkl v10+ 64 bit, sequential code, lp64 model) +# * Intel10_64ilp (intel mkl v10+ 64 bit, threaded code, ilp64 model) +# * Intel10_64ilp_seq (intel mkl v10+ 64 bit, sequential code, ilp64 model) # * Intel (older versions of mkl 32 and 64 bit) # * ACML # * ACML_MP @@ -199,9 +201,14 @@ if (BLA_VENDOR STREQUAL "All") endif() endif () -#BLAS in intel mkl 10 library? (em64t 64bit) +#BLAS in intel mkl 10+ library? (em64t 64bit) if (BLA_VENDOR MATCHES "Intel" OR BLA_VENDOR STREQUAL "All") if (NOT BLAS_LIBRARIES) + if (BLA_VENDOR MATCHES "_64ilp") + set(BLAS_mkl_ILP_MODE "ilp64") + else () + set(BLAS_mkl_ILP_MODE "lp64") + endif () if (NOT WIN32) set(LM "-lm") endif () @@ -230,9 +237,9 @@ if (BLA_VENDOR MATCHES "Intel" OR BLA_VENDOR STREQUAL "All") list(APPEND BLAS_SEARCH_LIBS_WIN_MAIN "mkl_blas95${BLAS_mkl_DLL_SUFFIX} mkl_intel_c${BLAS_mkl_DLL_SUFFIX}") endif() - if (BLA_VENDOR MATCHES "^Intel10_64lp" OR BLA_VENDOR STREQUAL "All") + if (BLA_VENDOR MATCHES "^Intel10_64i?lp" OR BLA_VENDOR STREQUAL "All") list(APPEND BLAS_SEARCH_LIBS_WIN_MAIN - "mkl_blas95_lp64${BLAS_mkl_DLL_SUFFIX} mkl_intel_lp64${BLAS_mkl_DLL_SUFFIX}") + "mkl_blas95_${BLAS_mkl_ILP_MODE}${BLAS_mkl_DLL_SUFFIX} mkl_intel_${BLAS_mkl_ILP_MODE}${BLAS_mkl_DLL_SUFFIX}") endif () # Add threading/sequential libs @@ -262,23 +269,23 @@ if (BLA_VENDOR MATCHES "Intel" OR BLA_VENDOR STREQUAL "All") list(APPEND BLAS_SEARCH_LIBS "mkl_blas95 mkl_intel mkl_intel_thread mkl_core guide") endif () - if (BLA_VENDOR STREQUAL "Intel10_64lp" OR BLA_VENDOR STREQUAL "All") + if (BLA_VENDOR MATCHES "^Intel10_64i?lp$" OR BLA_VENDOR STREQUAL "All") # old version list(APPEND BLAS_SEARCH_LIBS - "mkl_blas95 mkl_intel_lp64 mkl_intel_thread mkl_core guide") + "mkl_blas95 mkl_intel_${BLAS_mkl_ILP_MODE} mkl_intel_thread mkl_core guide") # mkl >= 10.3 if (CMAKE_C_COMPILER MATCHES ".+gcc") list(APPEND BLAS_SEARCH_LIBS - "mkl_blas95_lp64 mkl_intel_lp64 mkl_gnu_thread mkl_core gomp") + "mkl_blas95_${BLAS_mkl_ILP_MODE} mkl_intel_${BLAS_mkl_ILP_MODE} mkl_gnu_thread mkl_core gomp") else () list(APPEND BLAS_SEARCH_LIBS - "mkl_blas95_lp64 mkl_intel_lp64 mkl_intel_thread mkl_core iomp5") + "mkl_blas95_${BLAS_mkl_ILP_MODE} mkl_intel_${BLAS_mkl_ILP_MODE} mkl_intel_thread mkl_core iomp5") endif () endif () - if (BLA_VENDOR STREQUAL "Intel10_64lp_seq" OR BLA_VENDOR STREQUAL "All") + if (BLA_VENDOR MATCHES "^Intel10_64i?lp_seq$" OR BLA_VENDOR STREQUAL "All") list(APPEND BLAS_SEARCH_LIBS - "mkl_intel_lp64 mkl_sequential mkl_core") + "mkl_blas95_${BLAS_mkl_ILP_MODE} mkl_intel_${BLAS_mkl_ILP_MODE} mkl_sequential mkl_core") endif () endif () else () @@ -297,9 +304,9 @@ if (BLA_VENDOR MATCHES "Intel" OR BLA_VENDOR STREQUAL "All") list(APPEND BLAS_SEARCH_LIBS_WIN_MAIN "mkl_intel_c${BLAS_mkl_DLL_SUFFIX}") endif() - if (BLA_VENDOR MATCHES "^Intel10_64lp" OR BLA_VENDOR STREQUAL "All") + if (BLA_VENDOR MATCHES "^Intel10_64i?lp" OR BLA_VENDOR STREQUAL "All") list(APPEND BLAS_SEARCH_LIBS_WIN_MAIN - "mkl_intel_lp64${BLAS_mkl_DLL_SUFFIX}") + "mkl_intel_${BLAS_mkl_ILP_MODE}${BLAS_mkl_DLL_SUFFIX}") endif () # Add threading/sequential libs @@ -329,24 +336,24 @@ if (BLA_VENDOR MATCHES "Intel" OR BLA_VENDOR STREQUAL "All") list(APPEND BLAS_SEARCH_LIBS "mkl_intel mkl_intel_thread mkl_core guide") endif () - if (BLA_VENDOR STREQUAL "Intel10_64lp" OR BLA_VENDOR STREQUAL "All") + if (BLA_VENDOR MATCHES "^Intel10_64i?lp$" OR BLA_VENDOR STREQUAL "All") # old version list(APPEND BLAS_SEARCH_LIBS - "mkl_intel_lp64 mkl_intel_thread mkl_core guide") + "mkl_intel_${BLAS_mkl_ILP_MODE} mkl_intel_thread mkl_core guide") # mkl >= 10.3 if (CMAKE_C_COMPILER MATCHES ".+gcc") list(APPEND BLAS_SEARCH_LIBS - "mkl_intel_lp64 mkl_gnu_thread mkl_core gomp") + "mkl_intel_${BLAS_mkl_ILP_MODE} mkl_gnu_thread mkl_core gomp") else () list(APPEND BLAS_SEARCH_LIBS - "mkl_intel_lp64 mkl_intel_thread mkl_core iomp5") + "mkl_intel_${BLAS_mkl_ILP_MODE} mkl_intel_thread mkl_core iomp5") endif () endif () - if (BLA_VENDOR STREQUAL "Intel10_64lp_seq" OR BLA_VENDOR STREQUAL "All") + if (BLA_VENDOR MATCHES "^Intel10_64i?lp_seq$" OR BLA_VENDOR STREQUAL "All") list(APPEND BLAS_SEARCH_LIBS - "mkl_intel_lp64 mkl_sequential mkl_core") + "mkl_intel_${BLAS_mkl_ILP_MODE} mkl_sequential mkl_core") endif () #older vesions of intel mkl libs @@ -376,6 +383,7 @@ if (BLA_VENDOR MATCHES "Intel" OR BLA_VENDOR STREQUAL "All") endforeach () endif () + unset(BLAS_mkl_ILP_MODE) endif () endif () diff --git a/Modules/FindLAPACK.cmake b/Modules/FindLAPACK.cmake index a3c87f8..7ca9950 100644 --- a/Modules/FindLAPACK.cmake +++ b/Modules/FindLAPACK.cmake @@ -278,6 +278,12 @@ if (BLA_VENDOR MATCHES "Intel" OR BLA_VENDOR STREQUAL "All") find_package(Threads REQUIRED) endif() + if (BLA_VENDOR MATCHES "_64ilp") + set(BLAS_mkl_ILP_MODE "ilp64") + else () + set(BLAS_mkl_ILP_MODE "lp64") + endif () + set(LAPACK_SEARCH_LIBS "") if (BLA_F95) @@ -292,7 +298,7 @@ if (BLA_VENDOR MATCHES "Intel" OR BLA_VENDOR STREQUAL "All") list(APPEND LAPACK_SEARCH_LIBS "mkl_intel_c") list(APPEND LAPACK_SEARCH_LIBS - "mkl_intel_lp64") + "mkl_intel_${BLAS_mkl_ILP_MODE}") else() set(LAPACK_mkl_SEARCH_SYMBOL "cheev") set(_LIBRARIES LAPACK_LIBRARIES) @@ -303,7 +309,7 @@ if (BLA_VENDOR MATCHES "Intel" OR BLA_VENDOR STREQUAL "All") "mkl_lapack") # new >= 10.3 list(APPEND LAPACK_SEARCH_LIBS - "mkl_gf_lp64") + "mkl_gf_${BLAS_mkl_ILP_MODE}") endif() # First try empty lapack libs @@ -332,6 +338,8 @@ if (BLA_VENDOR MATCHES "Intel" OR BLA_VENDOR STREQUAL "All") ) endif () endforeach () + + unset(BLAS_mkl_ILP_MODE) endif () endif() else() diff --git a/Modules/FindPkgConfig.cmake b/Modules/FindPkgConfig.cmake index 3934867..a96df99 100644 --- a/Modules/FindPkgConfig.cmake +++ b/Modules/FindPkgConfig.cmake @@ -397,7 +397,7 @@ macro(_pkg_check_modules_internal _is_required _is_silent _no_cmake_path _no_cma set(_pkg_check_modules_exist_query) # check whether version is given - if (_pkg_check_modules_pkg MATCHES "(.*[^><])(>=|=|<=)(.*)") + if (_pkg_check_modules_pkg MATCHES "(.*[^><])(=|[><]=?)(.*)") set(_pkg_check_modules_pkg_name "${CMAKE_MATCH_1}") set(_pkg_check_modules_pkg_op "${CMAKE_MATCH_2}") set(_pkg_check_modules_pkg_ver "${CMAKE_MATCH_3}") @@ -415,9 +415,11 @@ macro(_pkg_check_modules_internal _is_required _is_silent _no_cmake_path _no_cma list(APPEND _pkg_check_modules_packages "${_pkg_check_modules_pkg_name}") # create the final query which is of the format: + # * <pkg-name> > <version> # * <pkg-name> >= <version> # * <pkg-name> = <version> # * <pkg-name> <= <version> + # * <pkg-name> < <version> # * --exists <pkg-name> list(APPEND _pkg_check_modules_exist_query --print-errors --short-errors) if (_pkg_check_modules_pkg_op) diff --git a/Modules/InstallRequiredSystemLibraries.cmake b/Modules/InstallRequiredSystemLibraries.cmake index 36dd0a0..4ecba05 100644 --- a/Modules/InstallRequiredSystemLibraries.cmake +++ b/Modules/InstallRequiredSystemLibraries.cmake @@ -362,7 +362,7 @@ if(MSVC) ) endif() - # include the language dll's for vs8 as well as the actuall dll's + # include the language dll's for vs8 as well as the actual dll's set(MSVC_MFCLOC_DIR "${MSVC_REDIST_DIR}/${CMAKE_MSVC_ARCH}/Microsoft.VC80.MFCLOC") # Install the manifest that allows DLLs to be loaded from the # directory containing the executable. @@ -406,7 +406,7 @@ if(MSVC) ) endif() - # include the language dll's for vs9 as well as the actuall dll's + # include the language dll's for vs9 as well as the actual dll's set(MSVC_MFCLOC_DIR "${MSVC_REDIST_DIR}/${CMAKE_MSVC_ARCH}/Microsoft.VC90.MFCLOC") # Install the manifest that allows DLLs to be loaded from the # directory containing the executable. @@ -487,7 +487,7 @@ if(MSVC) endif() endif() - # include the language dll's as well as the actuall dll's + # include the language dll's as well as the actual dll's set(MSVC_MFCLOC_DIR "${MSVC_REDIST_MFC_DIR}/${CMAKE_MSVC_ARCH}/Microsoft.${MSVC_REDIST_NAME}.MFCLOC") set(__install__libs ${__install__libs} "${MSVC_MFCLOC_DIR}/mfc${v}chs.dll" diff --git a/Modules/Internal/CPack/CPackRPM.cmake b/Modules/Internal/CPack/CPackRPM.cmake index 3bd5147..2de71ee 100644 --- a/Modules/Internal/CPack/CPackRPM.cmake +++ b/Modules/Internal/CPack/CPackRPM.cmake @@ -491,7 +491,7 @@ function(cpack_rpm_prepare_install_files INSTALL_FILES_LIST WDIR PACKAGE_PREFIXE list(LENGTH SYMLINK_RELOCATIONS SYMLINK_RELOCATIONS_COUNT) list(LENGTH POINT_RELOCATIONS POINT_RELOCATIONS_COUNT) else() - # location pointed to is ouside WDR so it should be treated as a permanent symlink + # location pointed to is outside WDR so it should be treated as a permanent symlink set(SYMLINK_POINT_WD_ "${SYMLINK_POINT_}") unset(SYMLINK_RELOCATIONS) diff --git a/Modules/NSIS.template.in b/Modules/NSIS.template.in index 9001888..f75ae78 100644 --- a/Modules/NSIS.template.in +++ b/Modules/NSIS.template.in @@ -847,7 +847,7 @@ Section "Uninstall" @CPACK_NSIS_DELETE_ICONS@ @CPACK_NSIS_DELETE_ICONS_EXTRA@ - ;Delete empty start menu parent diretories + ;Delete empty start menu parent directories StrCpy $MUI_TEMP "$SMPROGRAMS\$MUI_TEMP" startMenuDeleteLoop: @@ -866,7 +866,7 @@ Section "Uninstall" Delete "$SMPROGRAMS\$MUI_TEMP\Uninstall.lnk" @CPACK_NSIS_DELETE_ICONS_EXTRA@ - ;Delete empty start menu parent diretories + ;Delete empty start menu parent directories StrCpy $MUI_TEMP "$SMPROGRAMS\$MUI_TEMP" secondStartMenuDeleteLoop: diff --git a/Modules/Platform/Android-Clang.cmake b/Modules/Platform/Android-Clang.cmake index f739ab1..9ed1e01 100644 --- a/Modules/Platform/Android-Clang.cmake +++ b/Modules/Platform/Android-Clang.cmake @@ -40,5 +40,6 @@ macro(__android_compiler_clang lang) endif() if(NOT CMAKE_${lang}_COMPILER_TARGET) set(CMAKE_${lang}_COMPILER_TARGET "${_ANDROID_ABI_CLANG_TARGET}") + list(APPEND CMAKE_${lang}_COMPILER_PREDEFINES_COMMAND "--target=${CMAKE_${lang}_COMPILER_TARGET}") endif() endmacro() diff --git a/Modules/Platform/GNU.cmake b/Modules/Platform/GNU.cmake index e8c3b65..fac29a8 100644 --- a/Modules/Platform/GNU.cmake +++ b/Modules/Platform/GNU.cmake @@ -8,6 +8,33 @@ set(CMAKE_SHARED_LIBRARY_RPATH_LINK_C_FLAG "-Wl,-rpath-link,") set(CMAKE_SHARED_LIBRARY_SONAME_C_FLAG "-Wl,-soname,") set(CMAKE_EXE_EXPORTS_C_FLAG "-Wl,--export-dynamic") +# Debian policy requires that shared libraries be installed without +# executable permission. Fedora policy requires that shared libraries +# be installed with the executable permission. Since the native tools +# create shared libraries with execute permission in the first place a +# reasonable policy seems to be to install with execute permission by +# default. In order to support debian packages we provide an option +# here. The option default is based on the current distribution, but +# packagers can set it explicitly on the command line. +if(DEFINED CMAKE_INSTALL_SO_NO_EXE) + # Store the decision variable in the cache. This preserves any + # setting the user provides on the command line. + set(CMAKE_INSTALL_SO_NO_EXE "${CMAKE_INSTALL_SO_NO_EXE}" CACHE INTERNAL + "Install .so files without execute permission.") +else() + # Store the decision variable as an internal cache entry to avoid + # checking the platform every time. This option is advanced enough + # that only package maintainers should need to adjust it. They are + # capable of providing a setting on the command line. + if(EXISTS "/etc/debian_version") + set(CMAKE_INSTALL_SO_NO_EXE 1 CACHE INTERNAL + "Install .so files without execute permission.") + else() + set(CMAKE_INSTALL_SO_NO_EXE 0 CACHE INTERNAL + "Install .so files without execute permission.") + endif() +endif() + set(CMAKE_LIBRARY_ARCHITECTURE_REGEX "[a-z0-9_]+(-[a-z0-9_]+)?-gnu[a-z0-9_]*") include(Platform/UnixPaths) diff --git a/Modules/UseSWIG.cmake b/Modules/UseSWIG.cmake index dc4febc..f20a53b 100644 --- a/Modules/UseSWIG.cmake +++ b/Modules/UseSWIG.cmake @@ -500,6 +500,10 @@ function(SWIG_ADD_SOURCE_TO_MODULE name outfiles infile) get_property (compile_options SOURCE "${infile}" PROPERTY GENERATED_COMPILE_OPTIONS) set_property (SOURCE "${swig_generated_file_fullname}" PROPERTY COMPILE_OPTIONS $<TARGET_GENEX_EVAL:${target_name},$<TARGET_PROPERTY:${target_name},SWIG_GENERATED_COMPILE_OPTIONS>> ${compile_options}) + if (SWIG_MODULE_${name}_SWIG_LANGUAGE_FLAG MATCHES "php") + set_property (SOURCE "${swig_generated_file_fullname}" APPEND PROPERTY INCLUDE_DIRECTORIES "${outdir}") + endif() + set(${outfiles} "${swig_generated_file_fullname}" ${swig_extra_generated_files} PARENT_SCOPE) # legacy support diff --git a/Source/CMakeVersion.cmake b/Source/CMakeVersion.cmake index 129c6fb..626dbb8 100644 --- a/Source/CMakeVersion.cmake +++ b/Source/CMakeVersion.cmake @@ -1,5 +1,5 @@ # CMake version number components. set(CMake_VERSION_MAJOR 3) -set(CMake_VERSION_MINOR 12) -set(CMake_VERSION_PATCH 20181003) -#set(CMake_VERSION_RC 1) +set(CMake_VERSION_MINOR 13) +set(CMake_VERSION_PATCH 0) +set(CMake_VERSION_RC 1) diff --git a/Source/CTest/cmCTestScriptHandler.cxx b/Source/CTest/cmCTestScriptHandler.cxx index 6b62bb4..a87473d 100644 --- a/Source/CTest/cmCTestScriptHandler.cxx +++ b/Source/CTest/cmCTestScriptHandler.cxx @@ -563,7 +563,7 @@ int cmCTestScriptHandler::RunCurrentScript() // now that we have done most of the error checking finally run the // dashboard, we may be asked to repeatedly run this dashboard, such as - // for a continuous, do we ned to run it more than once? + // for a continuous, do we need to run it more than once? if (this->ContinuousDuration >= 0) { this->UpdateElapsedTime(); auto ending_time = diff --git a/Source/CTest/cmParseGTMCoverage.cxx b/Source/CTest/cmParseGTMCoverage.cxx index 822363d..83dde3f 100644 --- a/Source/CTest/cmParseGTMCoverage.cxx +++ b/Source/CTest/cmParseGTMCoverage.cxx @@ -160,7 +160,7 @@ bool cmParseGTMCoverage::ParseMCOVLine(std::string const& line, { // this method parses lines from the .mcov file // each line has ^COVERAGE(...) in it, and there - // are several varients of coverage lines: + // are several variants of coverage lines: // // ^COVERAGE("DIC11","PR1",0)="2:0:0:0" // ( file , entry, line ) = "number_executed:timing_info" diff --git a/Source/cmProjectCommand.cxx b/Source/cmProjectCommand.cxx index 305c7a6..8f565c8 100644 --- a/Source/cmProjectCommand.cxx +++ b/Source/cmProjectCommand.cxx @@ -300,19 +300,15 @@ bool cmProjectCommand::InitialPass(std::vector<std::string> const& args, } } - if (haveDescription) { - this->Makefile->AddDefinition("PROJECT_DESCRIPTION", description.c_str()); - this->Makefile->AddDefinition(projectName + "_DESCRIPTION", - description.c_str()); - TopLevelCMakeVarCondSet("CMAKE_PROJECT_DESCRIPTION", description.c_str()); - } + this->Makefile->AddDefinition("PROJECT_DESCRIPTION", description.c_str()); + this->Makefile->AddDefinition(projectName + "_DESCRIPTION", + description.c_str()); + TopLevelCMakeVarCondSet("CMAKE_PROJECT_DESCRIPTION", description.c_str()); - if (haveHomepage) { - this->Makefile->AddDefinition("PROJECT_HOMEPAGE_URL", homepage.c_str()); - this->Makefile->AddDefinition(projectName + "_HOMEPAGE_URL", - homepage.c_str()); - TopLevelCMakeVarCondSet("CMAKE_PROJECT_HOMEPAGE_URL", homepage.c_str()); - } + this->Makefile->AddDefinition("PROJECT_HOMEPAGE_URL", homepage.c_str()); + this->Makefile->AddDefinition(projectName + "_HOMEPAGE_URL", + homepage.c_str()); + TopLevelCMakeVarCondSet("CMAKE_PROJECT_HOMEPAGE_URL", homepage.c_str()); if (languages.empty()) { // if no language is specified do c and c++ diff --git a/Source/cmSystemTools.cxx b/Source/cmSystemTools.cxx index 8339aac..d05d660 100644 --- a/Source/cmSystemTools.cxx +++ b/Source/cmSystemTools.cxx @@ -2826,11 +2826,11 @@ bool cmSystemTools::RemoveRPath(std::string const& file, std::string* emsg, // contain the location of the linker map, however on MIPS the // .dynamic section is always read-only so this is not possible. MIPS // objects instead contain a DT_MIPS_RLD_MAP tag which contains the - // address where the dyanmic linker will write to (an indirect + // address where the dynamic linker will write to (an indirect // version of DT_DEBUG). Since this doesn't work when using PIE, a // relative equivalent was created - DT_MIPS_RLD_MAP_REL. Since this // version contains a relative offset, moving it changes the - // calculated address. This may cause the dyanmic linker to write + // calculated address. This may cause the dynamic linker to write // into memory it should not be changing. // // To fix this, we adjust the value of DT_MIPS_RLD_MAP_REL here. If diff --git a/Tests/CMakeLib/testSystemTools.cxx b/Tests/CMakeLib/testSystemTools.cxx index 0dfa326..623ad28 100644 --- a/Tests/CMakeLib/testSystemTools.cxx +++ b/Tests/CMakeLib/testSystemTools.cxx @@ -52,7 +52,7 @@ int testSystemTools(int /*unused*/, char* /*unused*/ []) cmAssert(cmSystemTools::strverscmp("99999999999999", "99999999999991") > 0, "strverscmp natural overflow"); cmAssert(cmSystemTools::strverscmp("00000000000009", "00000000000001") > 0, - "strverscmp deciaml precision"); + "strverscmp decimal precision"); cmAssert(cmSystemTools::strverscmp("a.b.c.0", "a.b.c.000") > 0, "strverscmp multiple zeros"); cmAssert(cmSystemTools::strverscmp("lib_1.2_10", "lib_1.2_2") > 0, diff --git a/Tests/QtAutogen/MocIncludeRelaxed/CMakeLists.txt b/Tests/QtAutogen/MocIncludeRelaxed/CMakeLists.txt index b1c4fc3..1ad6238 100644 --- a/Tests/QtAutogen/MocIncludeRelaxed/CMakeLists.txt +++ b/Tests/QtAutogen/MocIncludeRelaxed/CMakeLists.txt @@ -9,7 +9,7 @@ set(CMAKE_AUTOMOC_RELAXED_MODE TRUE) set(MOC_INCLUDE_NAME "mocIncludeRelaxed") include(${CMAKE_CURRENT_SOURCE_DIR}/../MocInclude/shared.cmake) -# Relaxed ony executable +# Relaxed only executable add_executable(mocIncludeRelaxedOnly RObjA.cpp RObjB.cpp diff --git a/Tests/RunCMake/FindPkgConfig/FindPkgConfig_VERSION_OPERATORS.cmake b/Tests/RunCMake/FindPkgConfig/FindPkgConfig_VERSION_OPERATORS.cmake new file mode 100644 index 0000000..2a505c6 --- /dev/null +++ b/Tests/RunCMake/FindPkgConfig/FindPkgConfig_VERSION_OPERATORS.cmake @@ -0,0 +1,83 @@ +cmake_minimum_required(VERSION 3.12) + +project(FindPkgConfig_IMPORTED_TARGET C) + +find_package(PkgConfig REQUIRED) + +message(STATUS "source: ${CMAKE_CURRENT_SOURCE_DIR} bin ${CMAKE_CURRENT_BINARY_DIR}") + +# Setup for the remaining package tests below +set(PKG_CONFIG_USE_CMAKE_PREFIX_PATH) +set(fakePkgDir ${CMAKE_CURRENT_BINARY_DIR}/pc-fakepackage) +file(WRITE ${fakePkgDir}/lib/libcmakeinternalfakepackage.a "") +file(WRITE ${fakePkgDir}/lib/cmakeinternalfakepackage.lib "") +file(WRITE ${fakePkgDir}/lib/pkgconfig/cmakeinternalfakepackage.pc +"Name: CMakeInternalFakePackage +Description: Dummy package for FindPkgConfig VERSION_OPERATORS test +Version: 8.9 +Libs: -lcmakeinternalfakepackage +") + +# Always find the .pc file in the calls further below so that we can test that +# the import target find_library() calls handle the NO...PATH options correctly +set(ENV{PKG_CONFIG_PATH} ${fakePkgDir}/lib/pkgconfig) + +pkg_check_modules(FakePackageGE REQUIRED QUIET "cmakeinternalfakepackage >= 8") +if (NOT FakePackageGE_FOUND) + message(FATAL_ERROR "fake package >= 8 not found") +endif() + +pkg_check_modules(FakePackageGE_FAIL QUIET "cmakeinternalfakepackage >= 8.10") +if (FakePackageGE_FAIL_FOUND) + message(FATAL_ERROR "fake package >= 8.10 found") +endif() + +pkg_check_modules(FakePackageLE REQUIRED QUIET "cmakeinternalfakepackage<=9") +if (NOT FakePackageLE_FOUND) + message(FATAL_ERROR "fake package <= 9 not found") +endif() + +pkg_check_modules(FakePackageLE_FAIL QUIET "cmakeinternalfakepackage <= 8.1") +if (FakePackageLE_FAIL_FOUND) + message(FATAL_ERROR "fake package <= 8.1 found") +endif() + +pkg_check_modules(FakePackageGT REQUIRED QUIET "cmakeinternalfakepackage > 8") +if (NOT FakePackageGT_FOUND) + message(FATAL_ERROR "fake package > 8 not found") +endif() + +pkg_check_modules(FakePackageGT_FAIL QUIET "cmakeinternalfakepackage > 8.9") +if (FakePackageGT_FAIL_FOUND) + message(FATAL_ERROR "fake package > 8.9 found") +endif() + +pkg_check_modules(FakePackageLT REQUIRED QUIET "cmakeinternalfakepackage<9") +if (NOT FakePackageLT_FOUND) + message(FATAL_ERROR "fake package < 9 not found") +endif() + +pkg_check_modules(FakePackageLT_FAIL QUIET "cmakeinternalfakepackage < 8.9") +if (FakePackageLT_FAIL_FOUND) + message(FATAL_ERROR "fake package < 8.9 found") +endif() + +pkg_check_modules(FakePackageEQ REQUIRED QUIET "cmakeinternalfakepackage=8.9") +if (NOT FakePackageEQ_FOUND) + message(FATAL_ERROR "fake package = 8.9 not found") +endif() + +pkg_check_modules(FakePackageEQ_FAIL QUIET "cmakeinternalfakepackage = 8.8") +if (FakePackageEQ_FAIL_FOUND) + message(FATAL_ERROR "fake package = 8.8 found") +endif() + +pkg_check_modules(FakePackageEQ_INV QUIET "cmakeinternalfakepackage == 8.9") +if (FakePackageEQ_FAIL_FOUND) + message(FATAL_ERROR "fake package == 8.9 found") +endif() + +pkg_check_modules(FakePackageLLT_INV QUIET "cmakeinternalfakepackage <<= 9") +if (FakePackageLLT_FAIL_FOUND) + message(FATAL_ERROR "fake package <<= 9 found") +endif() diff --git a/Tests/RunCMake/FindPkgConfig/RunCMakeTest.cmake b/Tests/RunCMake/FindPkgConfig/RunCMakeTest.cmake index e12b52f..671ff51 100644 --- a/Tests/RunCMake/FindPkgConfig/RunCMakeTest.cmake +++ b/Tests/RunCMake/FindPkgConfig/RunCMakeTest.cmake @@ -16,4 +16,5 @@ if (PKG_CONFIG_FOUND) run_cmake(FindPkgConfig_GET_VARIABLE) run_cmake(FindPkgConfig_cache_variables) run_cmake(FindPkgConfig_IMPORTED_TARGET) + run_cmake(FindPkgConfig_VERSION_OPERATORS) endif () diff --git a/Tests/RunCMake/project/ProjectTwice.cmake b/Tests/RunCMake/project/ProjectTwice.cmake new file mode 100644 index 0000000..d053834 --- /dev/null +++ b/Tests/RunCMake/project/ProjectTwice.cmake @@ -0,0 +1,26 @@ +cmake_policy(SET CMP0048 NEW) +project(ProjectTwiceTestFirst + VERSION 1.2.3.4 + DESCRIPTION "Test Project" + HOMEPAGE_URL "http://example.com" + LANGUAGES NONE +) + +project(ProjectTwiceTestSecond LANGUAGES NONE) + +foreach(var + PROJECT_VERSION + PROJECT_VERSION_MAJOR + PROJECT_VERSION_MINOR + PROJECT_VERSION_PATCH + PROJECT_VERSION_TWEAK + PROJECT_DESCRIPTION + PROJECT_HOMEPAGE_URL +) + if(${var}) + message(SEND_ERROR "${var} set but should be empty") + endif() + if(CMAKE_${var}) + message(SEND_ERROR "CMAKE_${var} set but should be empty") + endif() +endforeach() diff --git a/Tests/RunCMake/project/RunCMakeTest.cmake b/Tests/RunCMake/project/RunCMakeTest.cmake index e9fb929..3a8ad4b 100644 --- a/Tests/RunCMake/project/RunCMakeTest.cmake +++ b/Tests/RunCMake/project/RunCMakeTest.cmake @@ -15,6 +15,7 @@ run_cmake(ProjectDescriptionNoArg2) run_cmake(ProjectHomepage) run_cmake(ProjectHomepage2) run_cmake(ProjectHomepageNoArg) +run_cmake(ProjectTwice) run_cmake(VersionAndLanguagesEmpty) run_cmake(VersionEmpty) run_cmake(VersionInvalid) diff --git a/Utilities/Release/upload_release.cmake b/Utilities/Release/upload_release.cmake index 1edcd65..bbc7437 100644 --- a/Utilities/Release/upload_release.cmake +++ b/Utilities/Release/upload_release.cmake @@ -1,6 +1,6 @@ set(CTEST_RUN_CURRENT_SCRIPT 0) if(NOT VERSION) - set(VERSION 3.12) + set(VERSION 3.13) endif() if(NOT DEFINED PROJECT_PREFIX) set(PROJECT_PREFIX cmake-${VERSION}) |