diff options
Diffstat (limited to 'Modules/CPackRPM.cmake')
| -rw-r--r-- | Modules/CPackRPM.cmake | 227 |
1 files changed, 202 insertions, 25 deletions
diff --git a/Modules/CPackRPM.cmake b/Modules/CPackRPM.cmake index 36caac6..e9b836b 100644 --- a/Modules/CPackRPM.cmake +++ b/Modules/CPackRPM.cmake @@ -706,6 +706,77 @@ # symbolic link(s) is also on a relocatable path, relocating it during # package installation may cause initial symbolic link to point to an # invalid location. +# +# Packaging of sources (SRPM) +# ^^^^^^^^^^^^^^^^^^^^^^^^^^^ +# +# SRPM packaging is enabled by setting :variable:`CPACK_RPM_PACKAGE_SOURCES` +# variable while usually using :variable:`CPACK_INSTALLED_DIRECTORIES` variable +# to provide directory containing CMakeLists.txt and source files. +# +# For CMake projects SRPM package would be product by executing: +# +# ``cpack -G RPM --config ./CPackSourceConfig.cmake`` +# +# .. note:: +# +# Produced SRPM package is expected to be built with :manual:`cmake(1)` executable +# and packaged with :manual:`cpack(1)` executable so CMakeLists.txt has to be +# located in root source directory and must be able to generate binary rpm +# packages by executing ``cpack -G`` command. The two executables as well as +# rpmbuild must also be present when generating binary rpm packages from the +# produced SRPM package. +# +# Once the SRPM package is generated it can be used to generate binary packages +# by creating a directory structure for rpm generation and executing rpmbuild +# tool: +# +# ``mkdir -p build_dir/{BUILD,BUILDROOT,RPMS,SOURCES,SPECS,SRPMS}`` +# ``rpmbuild --define "_topdir <path_to_build_dir>" --rebuild <SRPM_file_name>`` +# +# Generated packages will be located in build_dir/RPMS directory or its sub +# directories. +# +# .. note:: +# +# SRPM package internally uses CPack/RPM generator to generate binary packages +# so CMakeScripts.txt can decide during the SRPM to binary rpm generation step +# what content the package(s) should have as well as how they should be packaged +# (monolithic or components). CMake can decide this for e.g. by reading environment +# variables set by the package manager before starting the process of generating +# binary rpm packages. This way a single SRPM package can be used to produce +# different binary rpm packages on different platforms depending on the platform's +# packaging rules. +# +# Source RPM packaging has it's own set of variables: +# +# .. variable:: CPACK_RPM_PACKAGE_SOURCES +# +# Should the content be packaged as a source rpm (default is binary rpm). +# +# * Mandatory : NO +# * Default : OFF +# +# .. note:: +# +# For cmake projects :variable:`CPACK_RPM_PACKAGE_SOURCES` variable is set +# to ``OFF`` in CPackConfig.cmake and ``ON`` in CPackSourceConfig.cmake +# generated files. +# +# .. variable:: CPACK_RPM_SOURCE_PKG_BUILD_PARAMS +# +# Additional command-line parameters provided to :manual:`cmake(1)` executable. +# +# * Mandatory : NO +# * Default : - +# +# .. variable:: CPACK_RPM_SOURCE_PKG_PACKAGING_INSTALL_PREFIX +# +# Packaging install prefix that would be provided in :variable:`CPACK_PACKAGING_INSTALL_PREFIX` +# variable for producing binary RPM packages. +# +# * Mandatory : YES +# * Default : "/" #============================================================================= # Copyright 2007-2016 Kitware, Inc. @@ -1515,18 +1586,27 @@ function(cpack_rpm_generate_package) set(CPACK_RPM_COMPRESSION_TYPE_TMP "") endif() - if(CPACK_PACKAGE_RELOCATABLE OR CPACK_RPM_PACKAGE_RELOCATABLE) - if(CPACK_RPM_PACKAGE_DEBUG) - message("CPackRPM:Debug: Trying to build a relocatable package") + if(NOT CPACK_RPM_PACKAGE_SOURCES) + if(CPACK_PACKAGE_RELOCATABLE OR CPACK_RPM_PACKAGE_RELOCATABLE) + if(CPACK_RPM_PACKAGE_DEBUG) + message("CPackRPM:Debug: Trying to build a relocatable package") + endif() + if(CPACK_SET_DESTDIR AND (NOT CPACK_SET_DESTDIR STREQUAL "I_ON")) + message("CPackRPM:Warning: CPACK_SET_DESTDIR is set (=${CPACK_SET_DESTDIR}) while requesting a relocatable package (CPACK_RPM_PACKAGE_RELOCATABLE is set): this is not supported, the package won't be relocatable.") + set(CPACK_RPM_PACKAGE_RELOCATABLE FALSE) + else() + set(CPACK_RPM_PACKAGE_PREFIX ${CPACK_PACKAGING_INSTALL_PREFIX}) # kept for back compatibility (provided external RPM spec files) + cpack_rpm_prepare_relocation_paths() + set(CPACK_RPM_PACKAGE_RELOCATABLE TRUE) + endif() endif() - if(CPACK_SET_DESTDIR AND (NOT CPACK_SET_DESTDIR STREQUAL "I_ON")) - message("CPackRPM:Warning: CPACK_SET_DESTDIR is set (=${CPACK_SET_DESTDIR}) while requesting a relocatable package (CPACK_RPM_PACKAGE_RELOCATABLE is set): this is not supported, the package won't be relocatable.") - set(CPACK_RPM_PACKAGE_RELOCATABLE FALSE) - else() - set(CPACK_RPM_PACKAGE_PREFIX ${CPACK_PACKAGING_INSTALL_PREFIX}) # kept for back compatibility (provided external RPM spec files) - cpack_rpm_prepare_relocation_paths() - set(CPACK_RPM_PACKAGE_RELOCATABLE TRUE) + else() + if(CPACK_RPM_PACKAGE_COMPONENT) + message(FATAL_ERROR "CPACK_RPM_PACKAGE_SOURCES parameter can not be used" + " in combination with CPACK_RPM_PACKAGE_COMPONENT parameter!") endif() + + set(CPACK_RPM_PACKAGE_RELOCATABLE FALSE) # disable relocatable option if building source RPM endif() # Check if additional fields for RPM spec header are given @@ -1870,13 +1950,50 @@ function(cpack_rpm_generate_package) endif() endif() - # We should generate a USER spec file template: - # - either because the user asked for it : CPACK_RPM_GENERATE_USER_BINARY_SPECFILE_TEMPLATE - # - or the user did not provide one : NOT CPACK_RPM_USER_BINARY_SPECFILE - if(CPACK_RPM_GENERATE_USER_BINARY_SPECFILE_TEMPLATE OR NOT CPACK_RPM_USER_BINARY_SPECFILE) + if(CPACK_RPM_PACKAGE_SOURCES) # source rpm + set(archive_name_ "${CPACK_RPM_PACKAGE_NAME}-${CPACK_RPM_PACKAGE_VERSION}") + + execute_process( + COMMAND ${CMAKE_COMMAND} -E tar "cfvz" "${CPACK_RPM_DIRECTORY}/SOURCES/${archive_name_}.tar.gz" "${CPACK_PACKAGE_FILE_NAME}" + WORKING_DIRECTORY ${CPACK_RPM_DIRECTORY} + ) + set(TMP_RPM_SOURCE "Source: ${archive_name_}.tar.gz") + + if(CPACK_RPM_BUILDREQUIRES) + set(TMP_RPM_BUILD_REQUIRES "BuildRequires: ${CPACK_RPM_BUILDREQUIRES}") + endif() + + # Disable debuginfo packages - srpm generates invalid packages due to + # releasing controll to cpack to generate binary packages. + # Note however that this doesn't prevent cpack to generate debuginfo + # packages when run from srpm with --rebuild. + set(TMP_RPM_DISABLE_DEBUGINFO "%define debug_package %{nil}") + + if(NOT CPACK_RPM_SOURCE_PKG_PACKAGING_INSTALL_PREFIX) + set(CPACK_RPM_SOURCE_PKG_PACKAGING_INSTALL_PREFIX "/") + endif() + + set(TMP_RPM_BUILD + " +%build +mkdir cpack_rpm_build_dir +cd cpack_rpm_build_dir +cmake ${CPACK_RPM_SOURCE_PKG_BUILD_PARAMS} -DCPACK_PACKAGING_INSTALL_PREFIX=${CPACK_RPM_SOURCE_PKG_PACKAGING_INSTALL_PREFIX} ../${CPACK_PACKAGE_FILE_NAME} +make %{?_smp_mflags}" # %{?_smp_mflags} -> -j option + ) + set(TMP_RPM_INSTALL + " +cd cpack_rpm_build_dir +cpack -G RPM +mv *.rpm %_rpmdir" + ) + set(TMP_RPM_PREP "%setup -c") + + set(RPMBUILD_FLAGS "-bs") + file(WRITE ${CPACK_RPM_BINARY_SPECFILE}.in "# -*- rpm-spec -*- -BuildRoot: \@CPACK_RPM_DIRECTORY\@/\@CPACK_PACKAGE_FILE_NAME\@\@CPACK_RPM_PACKAGE_COMPONENT_PART_PATH\@ +BuildRoot: %_topdir/\@CPACK_PACKAGE_FILE_NAME\@ Summary: \@CPACK_RPM_PACKAGE_SUMMARY\@ Name: \@CPACK_RPM_PACKAGE_NAME\@ Version: \@CPACK_RPM_PACKAGE_VERSION\@ @@ -1884,6 +2001,64 @@ Release: \@CPACK_RPM_PACKAGE_RELEASE\@ License: \@CPACK_RPM_PACKAGE_LICENSE\@ Group: \@CPACK_RPM_PACKAGE_GROUP\@ Vendor: \@CPACK_RPM_PACKAGE_VENDOR\@ + +\@TMP_RPM_SOURCE\@ +\@TMP_RPM_BUILD_REQUIRES\@ +\@TMP_RPM_BUILDARCH\@ +\@TMP_RPM_PREFIXES\@ + +\@TMP_RPM_DISABLE_DEBUGINFO\@ + +%define _rpmdir %_topdir/RPMS +%define _srcrpmdir %_topdir/SRPMS +\@FILE_NAME_DEFINE\@ +%define _unpackaged_files_terminate_build 0 +\@TMP_RPM_SPEC_INSTALL_POST\@ +\@CPACK_RPM_SPEC_MORE_DEFINE\@ +\@CPACK_RPM_COMPRESSION_TYPE_TMP\@ + +%description +\@CPACK_RPM_PACKAGE_DESCRIPTION\@ + +# This is a shortcutted spec file generated by CMake RPM generator +# we skip _install step because CPack does that for us. +# We do only save CPack installed tree in _prepr +# and then restore it in build. +%prep +\@TMP_RPM_PREP\@ + +\@TMP_RPM_BUILD\@ + +#p build + +%install +\@TMP_RPM_INSTALL\@ + +%clean + +%changelog +\@CPACK_RPM_SPEC_CHANGELOG\@ +" + ) + else() # binary rpm + + # We should generate a USER spec file template: + # - either because the user asked for it : CPACK_RPM_GENERATE_USER_BINARY_SPECFILE_TEMPLATE + # - or the user did not provide one : NOT CPACK_RPM_USER_BINARY_SPECFILE + if(CPACK_RPM_GENERATE_USER_BINARY_SPECFILE_TEMPLATE OR NOT CPACK_RPM_USER_BINARY_SPECFILE) + set(RPMBUILD_FLAGS "-bb") + + file(WRITE ${CPACK_RPM_BINARY_SPECFILE}.in + "# -*- rpm-spec -*- +BuildRoot: %_topdir/\@CPACK_PACKAGE_FILE_NAME\@\@CPACK_RPM_PACKAGE_COMPONENT_PART_PATH\@ +Summary: \@CPACK_RPM_PACKAGE_SUMMARY\@ +Name: \@CPACK_RPM_PACKAGE_NAME\@ +Version: \@CPACK_RPM_PACKAGE_VERSION\@ +Release: \@CPACK_RPM_PACKAGE_RELEASE\@ +License: \@CPACK_RPM_PACKAGE_LICENSE\@ +Group: \@CPACK_RPM_PACKAGE_GROUP\@ +Vendor: \@CPACK_RPM_PACKAGE_VENDOR\@ + \@TMP_RPM_URL\@ \@TMP_RPM_REQUIRES\@ \@TMP_RPM_REQUIRES_PRE\@ @@ -1901,10 +2076,10 @@ Vendor: \@CPACK_RPM_PACKAGE_VENDOR\@ \@TMP_RPM_DEBUGINFO\@ -%define _rpmdir \@CPACK_RPM_DIRECTORY\@ +%define _rpmdir %_topdir/RPMS +%define _srcrpmdir %_topdir/SRPMS \@FILE_NAME_DEFINE\@ %define _unpackaged_files_terminate_build 0 -%define _topdir \@CPACK_RPM_DIRECTORY\@ \@TMP_RPM_SPEC_INSTALL_POST\@ \@CPACK_RPM_SPEC_MORE_DEFINE\@ \@CPACK_RPM_COMPRESSION_TYPE_TMP\@ @@ -1917,16 +2092,14 @@ Vendor: \@CPACK_RPM_PACKAGE_VENDOR\@ # We do only save CPack installed tree in _prepr # and then restore it in build. %prep -mv $RPM_BUILD_ROOT \"\@CPACK_TOPLEVEL_DIRECTORY\@/tmpBBroot\" - -#p build +mv $RPM_BUILD_ROOT %_topdir/tmpBBroot %install if [ -e $RPM_BUILD_ROOT ]; then rm -rf $RPM_BUILD_ROOT fi -mv \"\@CPACK_TOPLEVEL_DIRECTORY\@/tmpBBroot\" $RPM_BUILD_ROOT +mv %_topdir/tmpBBroot $RPM_BUILD_ROOT %clean @@ -1951,7 +2124,10 @@ mv \"\@CPACK_TOPLEVEL_DIRECTORY\@/tmpBBroot\" $RPM_BUILD_ROOT %changelog \@CPACK_RPM_SPEC_CHANGELOG\@ -") +" + ) + endif() + # Stop here if we were asked to only generate a template USER spec file # The generated file may then be used as a template by user who wants # to customize their own spec file. @@ -1977,9 +2153,9 @@ mv \"\@CPACK_TOPLEVEL_DIRECTORY\@/tmpBBroot\" $RPM_BUILD_ROOT if(RPMBUILD_EXECUTABLE) # Now call rpmbuild using the SPECFILE execute_process( - COMMAND "${RPMBUILD_EXECUTABLE}" -bb + COMMAND "${RPMBUILD_EXECUTABLE}" ${RPMBUILD_FLAGS} --define "_topdir ${CPACK_RPM_DIRECTORY}" - --buildroot "${CPACK_RPM_DIRECTORY}/${CPACK_PACKAGE_FILE_NAME}${CPACK_RPM_PACKAGE_COMPONENT_PART_PATH}" + --buildroot "%_topdir/${CPACK_PACKAGE_FILE_NAME}${CPACK_RPM_PACKAGE_COMPONENT_PART_PATH}" # TODO should I remove this variable? or change the path? --target "${CPACK_RPM_PACKAGE_ARCHITECTURE}" "${CPACK_RPM_BINARY_SPECFILE}" WORKING_DIRECTORY "${CPACK_TOPLEVEL_DIRECTORY}/${CPACK_PACKAGE_FILE_NAME}${CPACK_RPM_PACKAGE_COMPONENT_PART_PATH}" @@ -2006,7 +2182,8 @@ mv \"\@CPACK_TOPLEVEL_DIRECTORY\@/tmpBBroot\" $RPM_BUILD_ROOT # Tell file(GLOB_RECURSE) not to follow directory symlinks # even if the project does not set this policy to NEW. cmake_policy(SET CMP0009 NEW) - file(GLOB_RECURSE GENERATED_FILES "${CPACK_RPM_DIRECTORY}/*.rpm") + file(GLOB_RECURSE GENERATED_FILES "${CPACK_RPM_DIRECTORY}/RPMS/*.rpm" + "${CPACK_RPM_DIRECTORY}/SRPMS/*.rpm") cmake_policy(POP) if(NOT GENERATED_FILES) |