diff options
Diffstat (limited to 'Modules/CPackRPM.cmake')
| -rw-r--r-- | Modules/CPackRPM.cmake | 115 |
1 files changed, 81 insertions, 34 deletions
diff --git a/Modules/CPackRPM.cmake b/Modules/CPackRPM.cmake index e1e76ed..442d7c4 100644 --- a/Modules/CPackRPM.cmake +++ b/Modules/CPackRPM.cmake @@ -1,3 +1,6 @@ +##section Variables specific to CPack RPM generator +##end +##module # - The builtin (binary) CPack RPM generator (Unix only) # CPackRPM may be used to create RPM package using CPack. # CPackRPM is a CPack generator thus it uses the CPACK_XXX variables @@ -15,52 +18,67 @@ # You'll find a detailed usage of CPackRPM on the wiki: # http://www.cmake.org/Wiki/CMake:CPackPackageGenerators#RPM_.28Unix_Only.29 # However as a handy reminder here comes the list of specific variables: +##end # -# CPACK_RPM_PACKAGE_SUMMARY +##variable +# CPACK_RPM_PACKAGE_SUMMARY - The RPM package summary. # Mandatory : YES # Default : CPACK_PACKAGE_DESCRIPTION_SUMMARY -# The RPM package summary -# CPACK_RPM_PACKAGE_NAME +##end +##variable +# CPACK_RPM_PACKAGE_NAME - The RPM package name. # Mandatory : YES # Default : CPACK_PACKAGE_NAME -# The RPM package name -# CPACK_RPM_PACKAGE_VERSION +##end +##variable +# CPACK_RPM_PACKAGE_VERSION - The RPM package version. # Mandatory : YES # Default : CPACK_PACKAGE_VERSION -# The RPM package version -# CPACK_RPM_PACKAGE_ARCHITECTURE +##end +##variable +# CPACK_RPM_PACKAGE_ARCHITECTURE - The RPM package architecture. # Mandatory : NO # Default : - -# The RPM package architecture. This may be set to "noarch" if you +# This may be set to "noarch" if you # know you are building a noarch package. -# CPACK_RPM_PACKAGE_RELEASE +##end +##variable +# CPACK_RPM_PACKAGE_RELEASE - The RPM package release. # Mandatory : YES # Default : 1 -# The RPM package release. This is the numbering of the RPM package +# This is the numbering of the RPM package # itself, i.e. the version of the packaging and not the version of the # content (see CPACK_RPM_PACKAGE_VERSION). One may change the default # value if the previous packaging was buggy and/or you want to put here # a fancy Linux distro specific numbering. -# CPACK_RPM_PACKAGE_LICENSE +##end +##variable +# CPACK_RPM_PACKAGE_LICENSE - The RPM package license policy. # Mandatory : YES # Default : "unknown" -# The RPM package license policy. -# CPACK_RPM_PACKAGE_GROUP +##end +##variable +# CPACK_RPM_PACKAGE_GROUP - The RPM package group. # Mandatory : YES # Default : "unknown" -# The RPM package group. -# CPACK_RPM_PACKAGE_VENDOR +##end +##variable +# CPACK_RPM_PACKAGE_VENDOR - The RPM package vendor. # Mandatory : YES # Default : CPACK_PACKAGE_VENDOR if set or "unknown" -# The RPM package vendor. -# CPACK_RPM_PACKAGE_URL +##end +##variable +# CPACK_RPM_PACKAGE_URL - The projects URL. # Mandatory : NO # Default : - -# The projects URL. -# CPACK_RPM_PACKAGE_DESCRIPTION +##end +##variable +# CPACK_RPM_PACKAGE_DESCRIPTION - RPM package description. # Mandatory : YES # Default : CPACK_PACKAGE_DESCRIPTION_FILE if set or "no package description available" -# CPACK_RPM_COMPRESSION_TYPE +##end +##variable +# CPACK_RPM_COMPRESSION_TYPE - RPM compression type. # Mandatory : NO # Default : - # May be used to override RPM compression type to be used @@ -68,7 +86,9 @@ # to lzma or xz compression whereas older cannot use such RPM. # Using this one can enforce compression type to be used. # Possible value are: lzma, xz, bzip2 and gzip. -# CPACK_RPM_PACKAGE_REQUIRES +##end +##variable +# CPACK_RPM_PACKAGE_REQUIRES - RPM spec requires field. # Mandatory : NO # Default : - # May be used to set RPM dependencies (requires). @@ -77,22 +97,30 @@ # set(CPACK_RPM_PACKAGE_REQUIRES "python >= 2.5.0, cmake >= 2.8") # The required package list of an RPM file could be printed with # rpm -qp --requires file.rpm -# CPACK_RPM_PACKAGE_SUGGESTS +##end +##variable +# CPACK_RPM_PACKAGE_SUGGESTS - RPM spec suggest field. # Mandatory : NO # Default : - # May be used to set weak RPM dependencies (suggests). # Note that you must enclose the complete requires string between quotes. -# CPACK_RPM_PACKAGE_PROVIDES +##end +##variable +# CPACK_RPM_PACKAGE_PROVIDES - RPM spec provides field. # Mandatory : NO # Default : - # May be used to set RPM dependencies (provides). # The provided package list of an RPM file could be printed with # rpm -qp --provides file.rpm -# CPACK_RPM_PACKAGE_OBSOLETES +##end +##variable +# CPACK_RPM_PACKAGE_OBSOLETES - RPM spec obsoletes field. # Mandatory : NO # Default : - # May be used to set RPM packages that are obsoleted by this one. -# CPACK_RPM_PACKAGE_RELOCATABLE +##end +##variable +# CPACK_RPM_PACKAGE_RELOCATABLE - build a relocatable RPM. # Mandatory : NO # Default : CPACK_PACKAGE_RELOCATABLE # If this variable is set to TRUE or ON CPackRPM will try @@ -103,7 +131,9 @@ # If CPACK_SET_DESTDIR is set then you will get a warning message # but if there is file installed with absolute path you'll get # unexpected behavior. -# CPACK_RPM_SPEC_INSTALL_POST [deprecated] +##end +##variable +# CPACK_RPM_SPEC_INSTALL_POST - [deprecated]. # Mandatory : NO # Default : - # This way of specifying post-install script is deprecated use @@ -111,23 +141,31 @@ # May be used to set an RPM post-install command inside the spec file. # For example setting it to "/bin/true" may be used to prevent # rpmbuild to strip binaries. -# CPACK_RPM_SPEC_MORE_DEFINE +##end +##variable +# CPACK_RPM_SPEC_MORE_DEFINE - RPM extended spec definitions lines. # Mandatory : NO # Default : - # May be used to add any %define lines to the generated spec file. -# CPACK_RPM_PACKAGE_DEBUG +##end +##variable +# CPACK_RPM_PACKAGE_DEBUG - Toggle CPackRPM debug output. # Mandatory : NO # Default : - # May be set when invoking cpack in order to trace debug information # during CPack RPM run. For example you may launch CPack like this # cpack -D CPACK_RPM_PACKAGE_DEBUG=1 -G RPM -# CPACK_RPM_USER_BINARY_SPECFILE +##end +##variable +# CPACK_RPM_USER_BINARY_SPECFILE - A user provided spec file. # Mandatory : NO # Default : - # May be set by the user in order to specify a USER binary spec file # to be used by CPackRPM instead of generating the file. # The specified file will be processed by CONFIGURE_FILE( @ONLY). -# CPACK_RPM_GENERATE_USER_BINARY_SPECFILE_TEMPLATE +##end +##variable +# CPACK_RPM_GENERATE_USER_BINARY_SPECFILE_TEMPLATE - Spec file template. # Mandatory : NO # Default : - # If set CPack will generate a template for USER specified binary @@ -135,6 +173,8 @@ # cpack -D CPACK_RPM_GENERATE_USER_BINARY_SPECFILE_TEMPLATE=1 -G RPM # The user may then use this file in order to hand-craft is own # binary spec file which may be used with CPACK_RPM_USER_BINARY_SPECFILE. +##end +##variable # CPACK_RPM_PRE_INSTALL_SCRIPT_FILE # CPACK_RPM_PRE_UNINSTALL_SCRIPT_FILE # Mandatory : NO @@ -143,11 +183,13 @@ # The refered script file(s) will be read and directly # put after the %pre or %preun section # If CPACK_RPM_COMPONENT_INSTALL is set to ON the (un)install script for -# each component can be overriden with +# each component can be overridden with # CPACK_RPM_<COMPONENT>_PRE_INSTALL_SCRIPT_FILE and # CPACK_RPM_<COMPONENT>_PRE_UNINSTALL_SCRIPT_FILE # One may verify which scriptlet has been included with # rpm -qp --scripts package.rpm +##end +##variable # CPACK_RPM_POST_INSTALL_SCRIPT_FILE # CPACK_RPM_POST_UNINSTALL_SCRIPT_FILE # Mandatory : NO @@ -156,26 +198,31 @@ # The refered script file(s) will be read and directly # put after the %post or %postun section # If CPACK_RPM_COMPONENT_INSTALL is set to ON the (un)install script for -# each component can be overriden with +# each component can be overridden with # CPACK_RPM_<COMPONENT>_POST_INSTALL_SCRIPT_FILE and # CPACK_RPM_<COMPONENT>_POST_UNINSTALL_SCRIPT_FILE # One may verify which scriptlet has been included with # rpm -qp --scripts package.rpm +##end +##variable # CPACK_RPM_USER_FILELIST # CPACK_RPM_<COMPONENT>_USER_FILELIST # Mandatory : NO # Default : - -# May be used to explicitely specify %(<directive>) file line +# May be used to explicitly specify %(<directive>) file line # in the spec file. Like %config(noreplace) or any other directive # that be found in the %files section. Since CPackRPM is generating # the list of files (and directories) the user specified files of # the CPACK_RPM_<COMPONENT>_USER_FILELIST list will be removed from the generated list. -# CPACK_RPM_CHANGELOG_FILE +##end +##variable +# CPACK_RPM_CHANGELOG_FILE - RPM changelog file. # Mandatory : NO # Default : - # May be used to embed a changelog in the spec file. # The refered file will be read and directly put after the %changelog # section. +##end #============================================================================= # Copyright 2007-2009 Kitware, Inc. |