diff options
Diffstat (limited to 'Modules/CPackRPM.cmake')
| -rw-r--r-- | Modules/CPackRPM.cmake | 69 |
1 files changed, 61 insertions, 8 deletions
diff --git a/Modules/CPackRPM.cmake b/Modules/CPackRPM.cmake index 51c8eac..bb1021b 100644 --- a/Modules/CPackRPM.cmake +++ b/Modules/CPackRPM.cmake @@ -4,7 +4,12 @@ # used by CPack : http://www.cmake.org/Wiki/CMake:CPackConfiguration # # However CPackRPM has specific features which are controlled by -# the specifics CPACK_RPM_XXX variables. +# the specifics CPACK_RPM_XXX variables. CPackRPM is a component aware +# generator so when CPACK_RPM_COMPONENT_INSTALL is ON some more +# CPACK_RPM_<ComponentName>_XXXX variables may be used in order +# to have component specific values. Note however that <componentName> +# refers to the **grouping name**. This may be either a component name +# or a component GROUP name. # Usually those vars correspond to RPM spec file entities, one may find # information about spec files here http://www.rpm.org/wiki/Docs. # You'll find a detailed usage of CPackRPM on the wiki: @@ -98,9 +103,11 @@ # If CPACK_SET_DESTDIR is set then you will get a warning message # but if there is file installed with absolute path you'll get # unexpected behavior. -# CPACK_RPM_SPEC_INSTALL_POST +# CPACK_RPM_SPEC_INSTALL_POST [deprecated] # Mandatory : NO # Default : - +# This way of specifying post-install script is deprecated use +# CPACK_RPM_POST_INSTALL_SCRIPT_FILE # May be used to set an RPM post-install command inside the spec file. # For example setting it to "/bin/true" may be used to prevent # rpmbuild to strip binaries. @@ -158,7 +165,7 @@ # Mandatory : NO # Default : - # May be used to embed a changelog in the spec file. -# The refered file will be read and directly put after the %changelog +# The refered file will be read and directly put after the %changelog # section. #============================================================================= @@ -388,9 +395,33 @@ if(CPACK_RPM_PACKAGE_RELOCATABLE) endif(CPACK_SET_DESTDIR AND (NOT CPACK_SET_DESTDIR STREQUAL "I_ON")) endif(CPACK_RPM_PACKAGE_RELOCATABLE) -# check if additional fields for RPM spec header are given +# Check if additional fields for RPM spec header are given +# There may be some COMPONENT specific variables as well FOREACH(_RPM_SPEC_HEADER URL REQUIRES SUGGESTS PROVIDES OBSOLETES PREFIX CONFLICTS AUTOPROV AUTOREQ AUTOREQPROV) - IF(CPACK_RPM_PACKAGE_${_RPM_SPEC_HEADER}) + IF(CPACK_RPM_PACKAGE_DEBUG) + message("CPackRPM:Debug: processing ${_RPM_SPEC_HEADER}") + ENDIF(CPACK_RPM_PACKAGE_DEBUG) + if(CPACK_RPM_PACKAGE_COMPONENT) + if(CPACK_RPM_${CPACK_RPM_PACKAGE_COMPONENT}_PACKAGE_${_RPM_SPEC_HEADER}) + IF(CPACK_RPM_PACKAGE_DEBUG) + message("CPackRPM:Debug: using CPACK_RPM_${CPACK_RPM_PACKAGE_COMPONENT}_PACKAGE_${_RPM_SPEC_HEADER}") + ENDIF(CPACK_RPM_PACKAGE_DEBUG) + set(CPACK_RPM_PACKAGE_${_RPM_SPEC_HEADER}_TMP ${CPACK_RPM_${CPACK_RPM_PACKAGE_COMPONENT}_PACKAGE_${_RPM_SPEC_HEADER}}) + else() + IF(CPACK_RPM_PACKAGE_DEBUG) + message("CPackRPM:Debug: CPACK_RPM_${CPACK_RPM_PACKAGE_COMPONENT}_PACKAGE_${_RPM_SPEC_HEADER} not defined") + message("CPackRPM:Debug: using CPACK_RPM_PACKAGE_${_RPM_SPEC_HEADER}") + ENDIF(CPACK_RPM_PACKAGE_DEBUG) + set(CPACK_RPM_PACKAGE_${_RPM_SPEC_HEADER}_TMP ${CPACK_RPM_PACKAGE_${_RPM_SPEC_HEADER}}) + endif() + else() + IF(CPACK_RPM_PACKAGE_DEBUG) + message("CPackRPM:Debug: using CPACK_RPM_PACKAGE_${_RPM_SPEC_HEADER}") + ENDIF(CPACK_RPM_PACKAGE_DEBUG) + set(CPACK_RPM_PACKAGE_${_RPM_SPEC_HEADER}_TMP ${CPACK_RPM_PACKAGE_${_RPM_SPEC_HEADER}}) + endif() + + IF(CPACK_RPM_PACKAGE_${_RPM_SPEC_HEADER}_TMP) STRING(LENGTH ${_RPM_SPEC_HEADER} _PACKAGE_HEADER_STRLENGTH) MATH(EXPR _PACKAGE_HEADER_STRLENGTH "${_PACKAGE_HEADER_STRLENGTH} - 1") STRING(SUBSTRING ${_RPM_SPEC_HEADER} 1 ${_PACKAGE_HEADER_STRLENGTH} _PACKAGE_HEADER_TAIL) @@ -398,10 +429,10 @@ FOREACH(_RPM_SPEC_HEADER URL REQUIRES SUGGESTS PROVIDES OBSOLETES PREFIX CONFLIC STRING(SUBSTRING ${_RPM_SPEC_HEADER} 0 1 _PACKAGE_HEADER_NAME) SET(_PACKAGE_HEADER_NAME "${_PACKAGE_HEADER_NAME}${_PACKAGE_HEADER_TAIL}") IF(CPACK_RPM_PACKAGE_DEBUG) - MESSAGE("CPackRPM:Debug: User defined ${_PACKAGE_HEADER_NAME}:\n ${CPACK_RPM_PACKAGE_${_RPM_SPEC_HEADER}}") + MESSAGE("CPackRPM:Debug: User defined ${_PACKAGE_HEADER_NAME}:\n ${CPACK_RPM_PACKAGE_${_RPM_SPEC_HEADER}_TMP}") ENDIF(CPACK_RPM_PACKAGE_DEBUG) - SET(TMP_RPM_${_RPM_SPEC_HEADER} "${_PACKAGE_HEADER_NAME}: ${CPACK_RPM_PACKAGE_${_RPM_SPEC_HEADER}}") - ENDIF(CPACK_RPM_PACKAGE_${_RPM_SPEC_HEADER}) + SET(TMP_RPM_${_RPM_SPEC_HEADER} "${_PACKAGE_HEADER_NAME}: ${CPACK_RPM_PACKAGE_${_RPM_SPEC_HEADER}_TMP}") +ENDIF(CPACK_RPM_PACKAGE_${_RPM_SPEC_HEADER}_TMP) ENDFOREACH(_RPM_SPEC_HEADER) # CPACK_RPM_SPEC_INSTALL_POST @@ -435,20 +466,31 @@ else(CPACK_RPM_PACKAGE_COMPONENT) set(CPACK_RPM_POST_INSTALL_READ_FILE ${CPACK_RPM_POST_INSTALL_SCRIPT_FILE}) set(CPACK_RPM_POST_UNINSTALL_READ_FILE ${CPACK_RPM_POST_UNINSTALL_SCRIPT_FILE}) endif(CPACK_RPM_PACKAGE_COMPONENT) + +# Handle post-install file if it has been specified if(CPACK_RPM_POST_INSTALL_READ_FILE) if(EXISTS ${CPACK_RPM_POST_INSTALL_READ_FILE}) file(READ ${CPACK_RPM_POST_INSTALL_READ_FILE} CPACK_RPM_SPEC_POSTINSTALL) else(EXISTS ${CPACK_RPM_POST_INSTALL_READ_FILE}) message("CPackRPM:Warning: CPACK_RPM_POST_INSTALL_SCRIPT_FILE <${CPACK_RPM_POST_INSTALL_READ_FILE}> does not exists - ignoring") endif(EXISTS ${CPACK_RPM_POST_INSTALL_READ_FILE}) +else(CPACK_RPM_POST_INSTALL_READ_FILE) + # reset SPEC var value if no post install file has been specified + # (either globally or component-wise) + set(CPACK_RPM_SPEC_POSTINSTALL "") endif(CPACK_RPM_POST_INSTALL_READ_FILE) +# Handle post-uninstall file if it has been specified if(CPACK_RPM_POST_UNINSTALL_READ_FILE) if(EXISTS ${CPACK_RPM_POST_UNINSTALL_READ_FILE}) file(READ ${CPACK_RPM_POST_UNINSTALL_READ_FILE} CPACK_RPM_SPEC_POSTUNINSTALL) else(EXISTS ${CPACK_RPM_POST_UNINSTALL_READ_FILE}) message("CPackRPM:Warning: CPACK_RPM_POST_UNINSTALL_SCRIPT_FILE <${CPACK_RPM_POST_UNINSTALL_READ_FILE}> does not exists - ignoring") endif(EXISTS ${CPACK_RPM_POST_UNINSTALL_READ_FILE}) +else(CPACK_RPM_POST_UNINSTALL_READ_FILE) + # reset SPEC var value if no post uninstall file has been specified + # (either globally or component-wise) + set(CPACK_RPM_SPEC_POSTUNINSTALL "") endif(CPACK_RPM_POST_UNINSTALL_READ_FILE) # CPACK_RPM_PRE_INSTALL_SCRIPT_FILE (or CPACK_RPM_<COMPONENT>_PRE_INSTALL_SCRIPT_FILE) @@ -471,20 +513,31 @@ else(CPACK_RPM_PACKAGE_COMPONENT) set(CPACK_RPM_PRE_INSTALL_READ_FILE ${CPACK_RPM_PRE_INSTALL_SCRIPT_FILE}) set(CPACK_RPM_PRE_UNINSTALL_READ_FILE ${CPACK_RPM_PRE_UNINSTALL_SCRIPT_FILE}) endif(CPACK_RPM_PACKAGE_COMPONENT) + +# Handle pre-install file if it has been specified if(CPACK_RPM_PRE_INSTALL_READ_FILE) if(EXISTS ${CPACK_RPM_PRE_INSTALL_READ_FILE}) file(READ ${CPACK_RPM_PRE_INSTALL_READ_FILE} CPACK_RPM_SPEC_PREINSTALL) else(EXISTS ${CPACK_RPM_PRE_INSTALL_READ_FILE}) message("CPackRPM:Warning: CPACK_RPM_PRE_INSTALL_SCRIPT_FILE <${CPACK_RPM_PRE_INSTALL_READ_FILE}> does not exists - ignoring") endif(EXISTS ${CPACK_RPM_PRE_INSTALL_READ_FILE}) +else(CPACK_RPM_PRE_INSTALL_READ_FILE) + # reset SPEC var value if no pre-install file has been specified + # (either globally or component-wise) + set(CPACK_RPM_SPEC_PREINSTALL "") endif(CPACK_RPM_PRE_INSTALL_READ_FILE) +# Handle pre-uninstall file if it has been specified if(CPACK_RPM_PRE_UNINSTALL_READ_FILE) if(EXISTS ${CPACK_RPM_PRE_UNINSTALL_READ_FILE}) file(READ ${CPACK_RPM_PRE_UNINSTALL_READ_FILE} CPACK_RPM_SPEC_PREUNINSTALL) else(EXISTS ${CPACK_RPM_PRE_UNINSTALL_READ_FILE}) message("CPackRPM:Warning: CPACK_RPM_PRE_UNINSTALL_SCRIPT_FILE <${CPACK_RPM_PRE_UNINSTALL_READ_FILE}> does not exists - ignoring") endif(EXISTS ${CPACK_RPM_PRE_UNINSTALL_READ_FILE}) +else(CPACK_RPM_PRE_UNINSTALL_READ_FILE) + # reset SPEC var value if no pre-uninstall file has been specified + # (either globally or component-wise) + set(CPACK_RPM_SPEC_PREUNINSTALL "") endif(CPACK_RPM_PRE_UNINSTALL_READ_FILE) # CPACK_RPM_CHANGELOG_FILE |