diff options
Diffstat (limited to 'Modules')
44 files changed, 919 insertions, 389 deletions
diff --git a/Modules/AutogenInfo.cmake.in b/Modules/AutogenInfo.cmake.in index 602b065..7d89420 100644 --- a/Modules/AutogenInfo.cmake.in +++ b/Modules/AutogenInfo.cmake.in @@ -1,5 +1,6 @@ set(AM_SOURCES @_cpp_files@ ) set(AM_RCC_SOURCES @_rcc_files@ ) +set(AM_RCC_INPUTS @_qt_rcc_inputs@) set(AM_SKIP_MOC @_skip_moc@ ) set(AM_SKIP_UIC @_skip_uic@ ) set(AM_HEADERS @_moc_headers@ ) diff --git a/Modules/CMakeDetermineCCompiler.cmake b/Modules/CMakeDetermineCCompiler.cmake index 6b425c6..937aa8c 100644 --- a/Modules/CMakeDetermineCCompiler.cmake +++ b/Modules/CMakeDetermineCCompiler.cmake @@ -108,7 +108,7 @@ if(NOT CMAKE_C_COMPILER_ID_RUN) CMAKE_DETERMINE_COMPILER_ID(C CFLAGS CMakeCCompilerId.c) # Set old compiler and platform id variables. - if("${CMAKE_C_COMPILER_ID}" MATCHES "GNU") + if(CMAKE_C_COMPILER_ID MATCHES "GNU") set(CMAKE_COMPILER_IS_GNUCC 1) endif() if("${CMAKE_C_PLATFORM_ID}" MATCHES "MinGW") @@ -131,11 +131,11 @@ endif () # "arm-unknown-nto-qnx6" instead of the correct "arm-unknown-nto-qnx6.3.0-" if (CMAKE_CROSSCOMPILING AND NOT _CMAKE_TOOLCHAIN_PREFIX) - if("${CMAKE_C_COMPILER_ID}" MATCHES "GNU" OR "${CMAKE_C_COMPILER_ID}" MATCHES "Clang") + if(CMAKE_C_COMPILER_ID MATCHES "GNU" OR CMAKE_C_COMPILER_ID MATCHES "Clang") get_filename_component(COMPILER_BASENAME "${CMAKE_C_COMPILER}" NAME) if (COMPILER_BASENAME MATCHES "^(.+-)(clang|g?cc)(-[0-9]+\\.[0-9]+\\.[0-9]+)?(\\.exe)?$") set(_CMAKE_TOOLCHAIN_PREFIX ${CMAKE_MATCH_1}) - elseif("${CMAKE_C_COMPILER_ID}" MATCHES "Clang") + elseif(CMAKE_C_COMPILER_ID MATCHES "Clang") if(CMAKE_C_COMPILER_TARGET) set(_CMAKE_TOOLCHAIN_PREFIX ${CMAKE_C_COMPILER_TARGET}-) endif() @@ -150,7 +150,7 @@ if (CMAKE_CROSSCOMPILING AND NOT _CMAKE_TOOLCHAIN_PREFIX) if ("${_CMAKE_TOOLCHAIN_PREFIX}" MATCHES "(.+-)?llvm-$") set(_CMAKE_TOOLCHAIN_PREFIX ${CMAKE_MATCH_1}) endif () - elseif("${CMAKE_C_COMPILER_ID}" MATCHES "TI") + elseif(CMAKE_C_COMPILER_ID MATCHES "TI") # TI compilers are named e.g. cl6x, cl470 or armcl.exe get_filename_component(COMPILER_BASENAME "${CMAKE_C_COMPILER}" NAME) if (COMPILER_BASENAME MATCHES "^(.+)?cl([^.]+)?(\\.exe)?$") diff --git a/Modules/CMakeDetermineCompilerId.cmake b/Modules/CMakeDetermineCompilerId.cmake index 6c6a914..0ea9ce1 100644 --- a/Modules/CMakeDetermineCompilerId.cmake +++ b/Modules/CMakeDetermineCompilerId.cmake @@ -48,7 +48,7 @@ function(CMAKE_DETERMINE_COMPILER_ID lang flagvar src) CMAKE_DETERMINE_COMPILER_ID_VENDOR(${lang}) endif() - if (COMPILER_QNXNTO AND CMAKE_${lang}_COMPILER_ID STREQUAL GNU) + if (COMPILER_QNXNTO AND CMAKE_${lang}_COMPILER_ID STREQUAL "GNU") execute_process( COMMAND "${CMAKE_${lang}_COMPILER}" -V diff --git a/Modules/CMakeDetermineFortranCompiler.cmake b/Modules/CMakeDetermineFortranCompiler.cmake index 96df6a2..a4bb86c 100644 --- a/Modules/CMakeDetermineFortranCompiler.cmake +++ b/Modules/CMakeDetermineFortranCompiler.cmake @@ -152,12 +152,12 @@ if(NOT CMAKE_Fortran_COMPILER_ID_RUN) endif() # Set old compiler and platform id variables. - if("${CMAKE_Fortran_COMPILER_ID}" MATCHES "GNU") + if(CMAKE_Fortran_COMPILER_ID MATCHES "GNU") set(CMAKE_COMPILER_IS_GNUG77 1) endif() - if("${CMAKE_Fortran_PLATFORM_ID}" MATCHES "MinGW") + if(CMAKE_Fortran_PLATFORM_ID MATCHES "MinGW") set(CMAKE_COMPILER_IS_MINGW 1) - elseif("${CMAKE_Fortran_PLATFORM_ID}" MATCHES "Cygwin") + elseif(CMAKE_Fortran_PLATFORM_ID MATCHES "Cygwin") set(CMAKE_COMPILER_IS_CYGWIN 1) endif() endif() @@ -175,7 +175,7 @@ endif () # "arm-unknown-nto-qnx6" instead of the correct "arm-unknown-nto-qnx6.3.0-" if (CMAKE_CROSSCOMPILING AND NOT _CMAKE_TOOLCHAIN_PREFIX) - if("${CMAKE_Fortran_COMPILER_ID}" MATCHES "GNU") + if(CMAKE_Fortran_COMPILER_ID MATCHES "GNU") get_filename_component(COMPILER_BASENAME "${CMAKE_Fortran_COMPILER}" NAME) if (COMPILER_BASENAME MATCHES "^(.+-)g?fortran(-[0-9]+\\.[0-9]+\\.[0-9]+)?(\\.exe)?$") set(_CMAKE_TOOLCHAIN_PREFIX ${CMAKE_MATCH_1}) diff --git a/Modules/CMakeExtraGeneratorDetermineCompilerMacrosAndIncludeDirs.cmake b/Modules/CMakeExtraGeneratorDetermineCompilerMacrosAndIncludeDirs.cmake index 365d381..064e650 100644 --- a/Modules/CMakeExtraGeneratorDetermineCompilerMacrosAndIncludeDirs.cmake +++ b/Modules/CMakeExtraGeneratorDetermineCompilerMacrosAndIncludeDirs.cmake @@ -26,11 +26,18 @@ macro(_DETERMINE_GCC_SYSTEM_INCLUDE_DIRS _lang _resultIncludeDirs _resultDefines if (${_lang} STREQUAL "c++") set(_compilerExecutable "${CMAKE_CXX_COMPILER}") set(_arg1 "${CMAKE_CXX_COMPILER_ARG1}") + + if (CMAKE_CXX_FLAGS MATCHES "(-stdlib=[^ ]+)") + set(_stdlib "${CMAKE_MATCH_1}") + endif () + if (CMAKE_CXX_FLAGS MATCHES "(-std=[^ ]+)") + set(_stdver "${CMAKE_MATCH_1}") + endif () else () set(_compilerExecutable "${CMAKE_C_COMPILER}") set(_arg1 "${CMAKE_C_COMPILER_ARG1}") endif () - execute_process(COMMAND ${_compilerExecutable} ${_arg1} -v -E -x ${_lang} -dD dummy + execute_process(COMMAND ${_compilerExecutable} ${_arg1} ${_stdver} ${_stdlib} -v -E -x ${_lang} -dD dummy WORKING_DIRECTORY ${CMAKE_BINARY_DIR}/CMakeFiles ERROR_VARIABLE _gccOutput OUTPUT_VARIABLE _gccStdout ) @@ -90,7 +97,7 @@ set(ENV{LANG} C) # Now check for C, works for gcc and Intel compiler at least if (NOT CMAKE_EXTRA_GENERATOR_C_SYSTEM_INCLUDE_DIRS) - if ("${CMAKE_C_COMPILER_ID}" MATCHES GNU OR "${CMAKE_C_COMPILER_ID}" MATCHES Intel OR "${CMAKE_C_COMPILER_ID}" MATCHES Clang) + if (CMAKE_C_COMPILER_ID MATCHES GNU OR CMAKE_C_COMPILER_ID MATCHES Intel OR CMAKE_C_COMPILER_ID MATCHES Clang) _DETERMINE_GCC_SYSTEM_INCLUDE_DIRS(c _dirs _defines) set(CMAKE_EXTRA_GENERATOR_C_SYSTEM_INCLUDE_DIRS "${_dirs}" CACHE INTERNAL "C compiler system include directories") set(CMAKE_EXTRA_GENERATOR_C_SYSTEM_DEFINED_MACROS "${_defines}" CACHE INTERNAL "C compiler system defined macros") diff --git a/Modules/CMakeFindBinUtils.cmake b/Modules/CMakeFindBinUtils.cmake index e0ba131..376a6dc 100644 --- a/Modules/CMakeFindBinUtils.cmake +++ b/Modules/CMakeFindBinUtils.cmake @@ -30,12 +30,12 @@ # License text for the above reference.) # if it's the MS C/CXX compiler, search for link -if("${CMAKE_C_SIMULATE_ID}" STREQUAL "MSVC" - OR "${CMAKE_CXX_SIMULATE_ID}" STREQUAL "MSVC" - OR "${CMAKE_Fortran_SIMULATE_ID}" STREQUAL "MSVC" - OR "${CMAKE_C_COMPILER_ID}" STREQUAL "MSVC" - OR "${CMAKE_CXX_COMPILER_ID}" STREQUAL "MSVC" - OR ("${CMAKE_GENERATOR}" MATCHES "Visual Studio" +if("x${CMAKE_C_SIMULATE_ID}" STREQUAL "xMSVC" + OR "x${CMAKE_CXX_SIMULATE_ID}" STREQUAL "xMSVC" + OR "x${CMAKE_Fortran_SIMULATE_ID}" STREQUAL "xMSVC" + OR "x${CMAKE_C_COMPILER_ID}" STREQUAL "xMSVC" + OR "x${CMAKE_CXX_COMPILER_ID}" STREQUAL "xMSVC" + OR (CMAKE_GENERATOR MATCHES "Visual Studio" AND NOT CMAKE_VS_PLATFORM_NAME STREQUAL "Tegra-Android")) find_program(CMAKE_LINKER NAMES link HINTS ${_CMAKE_TOOLCHAIN_LOCATION}) diff --git a/Modules/CMakeForceCompiler.cmake b/Modules/CMakeForceCompiler.cmake index 0e6b5af..1d8b110 100644 --- a/Modules/CMakeForceCompiler.cmake +++ b/Modules/CMakeForceCompiler.cmake @@ -70,7 +70,7 @@ macro(CMAKE_FORCE_C_COMPILER compiler id) set(CMAKE_C_COMPILER_FORCED TRUE) # Set old compiler id variables. - if("${CMAKE_C_COMPILER_ID}" MATCHES "GNU") + if(CMAKE_C_COMPILER_ID MATCHES "GNU") set(CMAKE_COMPILER_IS_GNUCC 1) endif() endmacro() @@ -94,7 +94,7 @@ macro(CMAKE_FORCE_Fortran_COMPILER compiler id) set(CMAKE_Fortran_COMPILER_FORCED TRUE) # Set old compiler id variables. - if("${CMAKE_Fortran_COMPILER_ID}" MATCHES "GNU") + if(CMAKE_Fortran_COMPILER_ID MATCHES "GNU") set(CMAKE_COMPILER_IS_GNUG77 1) endif() endmacro() diff --git a/Modules/CMakeNinjaFindMake.cmake b/Modules/CMakeNinjaFindMake.cmake index c3ca767..2f35cf4 100644 --- a/Modules/CMakeNinjaFindMake.cmake +++ b/Modules/CMakeNinjaFindMake.cmake @@ -12,6 +12,7 @@ # (To distribute this file outside of CMake, substitute the full # License text for the above reference.) -find_program(CMAKE_MAKE_PROGRAM ninja +find_program(CMAKE_MAKE_PROGRAM + NAMES ninja-build ninja DOC "Program used to build from build.ninja files.") mark_as_advanced(CMAKE_MAKE_PROGRAM) diff --git a/Modules/CPackBundle.cmake b/Modules/CPackBundle.cmake index d8293c0..d26a0b3 100644 --- a/Modules/CPackBundle.cmake +++ b/Modules/CPackBundle.cmake @@ -33,6 +33,31 @@ # Path to a startup script. This is a path to an executable or script that # will be run whenever an end-user double-clicks the generated bundle in the # OSX Finder. Optional. +# +# .. variable:: CPACK_BUNDLE_APPLE_CERT_APP +# +# The name of your Apple supplied code signing certificate for the application. +# The name usually takes the form "Developer ID Application: [Name]" or +# "3rd Party Mac Developer Application: [Name]". If this variable is not set +# the application will not be signed. +# +# .. variable:: CPACK_BUNDLE_APPLE_ENTITLEMENTS +# +# The name of the plist file that contains your apple entitlements for sandboxing +# your application. This file is required for submission to the Mac App Store. +# +# .. variable:: CPACK_BUNDLE_APPLE_CODESIGN_FILES +# +# A list of additional files that you wish to be signed. You do not need to +# list the main application folder, or the main executable. You should +# list any frameworks and plugins that are included in your app bundle. +# +# .. variable:: CPACK_COMMAND_CODESIGN +# +# Path to the codesign(1) command used to sign applications with an +# Apple cert. This variable can be used to override the automatically +# detected command (or specify its location if the auto-detection fails +# to find it.) #============================================================================= # Copyright 2006-2009 Kitware, Inc. diff --git a/Modules/CPackRPM.cmake b/Modules/CPackRPM.cmake index 2864b21..d2cb2ee 100644 --- a/Modules/CPackRPM.cmake +++ b/Modules/CPackRPM.cmake @@ -29,6 +29,7 @@ # However as a handy reminder here comes the list of specific variables: # # .. variable:: CPACK_RPM_PACKAGE_SUMMARY +# CPACK_RPM_<component>_PACKAGE_SUMMARY # # The RPM package summary. # @@ -100,11 +101,13 @@ # * Default : - # # .. variable:: CPACK_RPM_PACKAGE_DESCRIPTION +# CPACK_RPM_<component>_PACKAGE_DESCRIPTION # # RPM package description. # # * Mandatory : YES -# * Default : CPACK_PACKAGE_DESCRIPTION_FILE if set or "no package +# * Default : CPACK_COMPONENT_<compName>_DESCRIPTION (component based installers +# only) if set, CPACK_PACKAGE_DESCRIPTION_FILE if set or "no package # description available" # # .. variable:: CPACK_RPM_COMPRESSION_TYPE @@ -135,6 +138,56 @@ # # rpm -qp --requires file.rpm # +# .. variable:: CPACK_RPM_PACKAGE_REQUIRES_PRE +# +# RPM spec requires(pre) field. +# +# * Mandatory : NO +# * Default : - +# +# May be used to set RPM preinstall dependencies (requires(pre)). Note that you must enclose +# the complete requires string between quotes, for example:: +# +# set(CPACK_RPM_PACKAGE_REQUIRES_PRE "shadow-utils, initscripts") +# +# .. variable:: CPACK_RPM_PACKAGE_REQUIRES_POST +# +# RPM spec requires(post) field. +# +# * Mandatory : NO +# * Default : - +# +# May be used to set RPM postinstall dependencies (requires(post)). Note that you must enclose +# the complete requires string between quotes, for example:: +# +# set(CPACK_RPM_PACKAGE_REQUIRES_POST "shadow-utils, initscripts") +# +# +# .. variable:: CPACK_RPM_PACKAGE_REQUIRES_POSTUN +# +# RPM spec requires(postun) field. +# +# * Mandatory : NO +# * Default : - +# +# May be used to set RPM postuninstall dependencies (requires(postun)). Note that you must enclose +# the complete requires string between quotes, for example:: +# +# set(CPACK_RPM_PACKAGE_REQUIRES_POSTUN "shadow-utils, initscripts") +# +# +# .. variable:: CPACK_RPM_PACKAGE_REQUIRES_PREUN +# +# RPM spec requires(preun) field. +# +# * Mandatory : NO +# * Default : - +# +# May be used to set RPM preuninstall dependencies (requires(preun)). Note that you must enclose +# the complete requires string between quotes, for example:: +# +# set(CPACK_RPM_PACKAGE_REQUIRES_PREUN "shadow-utils, initscripts") +# # .. variable:: CPACK_RPM_PACKAGE_SUGGESTS # # RPM spec suggest field. @@ -384,7 +437,7 @@ if(CPACK_RPM_PACKAGE_DEBUG) OUTPUT_VARIABLE _TMP_LSB_RELEASE_OUTPUT ERROR_QUIET OUTPUT_STRIP_TRAILING_WHITESPACE) - string(REPLACE "\n" ", " + string(REGEX REPLACE "\n" ", " LSB_RELEASE_OUTPUT ${_TMP_LSB_RELEASE_OUTPUT}) else () @@ -397,7 +450,7 @@ endif() # to shut down warning about space in buildtree # some recent RPM version should support space in different places. # not checked [yet]. -if(CPACK_TOPLEVEL_DIRECTORY MATCHES " ") +if(CPACK_TOPLEVEL_DIRECTORY MATCHES ".* .*") message(FATAL_ERROR "${RPMBUILD_EXECUTABLE} can't handle paths with spaces, use a build directory without spaces for building RPMs.") endif() @@ -414,6 +467,7 @@ endif() # Are we packaging components ? if(CPACK_RPM_PACKAGE_COMPONENT) set(CPACK_RPM_PACKAGE_COMPONENT_PART_NAME "-${CPACK_RPM_PACKAGE_COMPONENT}") + string(TOUPPER ${CPACK_RPM_PACKAGE_COMPONENT} CPACK_RPM_PACKAGE_COMPONENT_UPPER) else() set(CPACK_RPM_PACKAGE_COMPONENT_PART_NAME "") endif() @@ -430,12 +484,31 @@ set(WDIR "${CPACK_TOPLEVEL_DIRECTORY}/${CPACK_PACKAGE_FILE_NAME}${CPACK_RPM_PACK # # CPACK_RPM_PACKAGE_SUMMARY (mandatory) + +# CPACK_RPM_PACKAGE_SUMMARY_ is used only locally so that it can be unset each time before use otherwise +# component packaging could leak variable content between components +unset(CPACK_RPM_PACKAGE_SUMMARY_) +if(CPACK_RPM_PACKAGE_SUMMARY) + set(CPACK_RPM_PACKAGE_SUMMARY_ ${CPACK_RPM_PACKAGE_SUMMARY}) + unset(CPACK_RPM_PACKAGE_SUMMARY) +endif() + +#Check for component summary first. +#If not set, it will use regular package summary logic. +if(CPACK_RPM_PACKAGE_COMPONENT) + if(CPACK_RPM_${CPACK_RPM_PACKAGE_COMPONENT}_PACKAGE_SUMMARY) + set(CPACK_RPM_PACKAGE_SUMMARY ${CPACK_RPM_${CPACK_RPM_PACKAGE_COMPONENT}_PACKAGE_SUMMARY}) + endif() +endif() + if(NOT CPACK_RPM_PACKAGE_SUMMARY) - # if neither var is defined lets use the name as summary - if(NOT CPACK_PACKAGE_DESCRIPTION_SUMMARY) - string(TOLOWER "${CPACK_PACKAGE_NAME}" CPACK_RPM_PACKAGE_SUMMARY) - else() + if(CPACK_RPM_PACKAGE_SUMMARY_) + set(CPACK_RPM_PACKAGE_SUMMARY ${CPACK_RPM_PACKAGE_SUMMARY_}) + elseif(CPACK_PACKAGE_DESCRIPTION_SUMMARY) set(CPACK_RPM_PACKAGE_SUMMARY ${CPACK_PACKAGE_DESCRIPTION_SUMMARY}) + else() + # if neither var is defined lets use the name as summary + string(TOLOWER "${CPACK_PACKAGE_NAME}" CPACK_RPM_PACKAGE_SUMMARY) endif() endif() @@ -508,12 +581,33 @@ endif() # if it is defined # - set to a default value # -if (NOT CPACK_RPM_PACKAGE_DESCRIPTION) - if (CPACK_PACKAGE_DESCRIPTION_FILE) - file(READ ${CPACK_PACKAGE_DESCRIPTION_FILE} CPACK_RPM_PACKAGE_DESCRIPTION) - else () - set(CPACK_RPM_PACKAGE_DESCRIPTION "no package description available") - endif () + +# CPACK_RPM_PACKAGE_DESCRIPTION_ is used only locally so that it can be unset each time before use otherwise +# component packaging could leak variable content between components +unset(CPACK_RPM_PACKAGE_DESCRIPTION_) +if(CPACK_RPM_PACKAGE_DESCRIPTION) + set(CPACK_RPM_PACKAGE_DESCRIPTION_ ${CPACK_RPM_PACKAGE_DESCRIPTION}) + unset(CPACK_RPM_PACKAGE_DESCRIPTION) +endif() + +#Check for a component description first. +#If not set, it will use regular package description logic. +if(CPACK_RPM_PACKAGE_COMPONENT) + if(CPACK_RPM_${CPACK_RPM_PACKAGE_COMPONENT}_PACKAGE_DESCRIPTION) + set(CPACK_RPM_PACKAGE_DESCRIPTION ${CPACK_RPM_${CPACK_RPM_PACKAGE_COMPONENT}_PACKAGE_DESCRIPTION}) + elseif(CPACK_COMPONENT_${CPACK_RPM_PACKAGE_COMPONENT_UPPER}_DESCRIPTION) + set(CPACK_RPM_PACKAGE_DESCRIPTION ${CPACK_COMPONENT_${CPACK_RPM_PACKAGE_COMPONENT_UPPER}_DESCRIPTION}) + endif() +endif() + +if(NOT CPACK_RPM_PACKAGE_DESCRIPTION) + if(CPACK_RPM_PACKAGE_DESCRIPTION_) + set(CPACK_RPM_PACKAGE_DESCRIPTION ${CPACK_RPM_PACKAGE_DESCRIPTION_}) + elseif(CPACK_PACKAGE_DESCRIPTION_FILE) + file(READ ${CPACK_PACKAGE_DESCRIPTION_FILE} CPACK_RPM_PACKAGE_DESCRIPTION) + else () + set(CPACK_RPM_PACKAGE_DESCRIPTION "no package description available") + endif () endif () # CPACK_RPM_COMPRESSION_TYPE @@ -556,7 +650,7 @@ endif() # There may be some COMPONENT specific variables as well # If component specific var is not provided we use the global one # for each component -foreach(_RPM_SPEC_HEADER URL REQUIRES SUGGESTS PROVIDES OBSOLETES PREFIX CONFLICTS AUTOPROV AUTOREQ AUTOREQPROV) +foreach(_RPM_SPEC_HEADER URL REQUIRES SUGGESTS PROVIDES OBSOLETES PREFIX CONFLICTS AUTOPROV AUTOREQ AUTOREQPROV REQUIRES_PRE REQUIRES_POST REQUIRES_PREUN REQUIRES_POSTUN) if(CPACK_RPM_PACKAGE_DEBUG) message("CPackRPM:Debug: processing ${_RPM_SPEC_HEADER}") endif() @@ -584,24 +678,29 @@ foreach(_RPM_SPEC_HEADER URL REQUIRES SUGGESTS PROVIDES OBSOLETES PREFIX CONFLIC endif() endif() + # Do not forget to unset previously set header (from previous component) + unset(TMP_RPM_${_RPM_SPEC_HEADER}) # Treat the RPM Spec keyword iff it has been properly defined if(DEFINED CPACK_RPM_PACKAGE_${_RPM_SPEC_HEADER}_TMP) # Transform NAME --> Name e.g. PROVIDES --> Provides # The Upper-case first letter and lowercase tail is the # appropriate value required in the final RPM spec file. - string(LENGTH ${_RPM_SPEC_HEADER} _PACKAGE_HEADER_STRLENGTH) - math(EXPR _PACKAGE_HEADER_STRLENGTH "${_PACKAGE_HEADER_STRLENGTH} - 1") - string(SUBSTRING ${_RPM_SPEC_HEADER} 1 ${_PACKAGE_HEADER_STRLENGTH} _PACKAGE_HEADER_TAIL) + string(SUBSTRING ${_RPM_SPEC_HEADER} 1 -1 _PACKAGE_HEADER_TAIL) string(TOLOWER "${_PACKAGE_HEADER_TAIL}" _PACKAGE_HEADER_TAIL) string(SUBSTRING ${_RPM_SPEC_HEADER} 0 1 _PACKAGE_HEADER_NAME) set(_PACKAGE_HEADER_NAME "${_PACKAGE_HEADER_NAME}${_PACKAGE_HEADER_TAIL}") + # The following keywords require parentheses around the "pre" or "post" suffix in the final RPM spec file. + set(SCRIPTS_REQUIREMENTS_LIST REQUIRES_PRE REQUIRES_POST REQUIRES_PREUN REQUIRES_POSTUN) + list(FIND SCRIPTS_REQUIREMENTS_LIST ${_RPM_SPEC_HEADER} IS_SCRIPTS_REQUIREMENT_FOUND) + if(NOT ${IS_SCRIPTS_REQUIREMENT_FOUND} EQUAL -1) + string(REPLACE "_" "(" _PACKAGE_HEADER_NAME "${_PACKAGE_HEADER_NAME}") + set(_PACKAGE_HEADER_NAME "${_PACKAGE_HEADER_NAME})") + endif() if(CPACK_RPM_PACKAGE_DEBUG) message("CPackRPM:Debug: User defined ${_PACKAGE_HEADER_NAME}:\n ${CPACK_RPM_PACKAGE_${_RPM_SPEC_HEADER}_TMP}") endif() set(TMP_RPM_${_RPM_SPEC_HEADER} "${_PACKAGE_HEADER_NAME}: ${CPACK_RPM_PACKAGE_${_RPM_SPEC_HEADER}_TMP}") - else() - # Do not forget to unset previously set header (from previous component) - unset(TMP_RPM_${_RPM_SPEC_HEADER}) + unset(CPACK_RPM_PACKAGE_${_RPM_SPEC_HEADER}_TMP) endif() endforeach() @@ -991,6 +1090,10 @@ Group: \@CPACK_RPM_PACKAGE_GROUP\@ Vendor: \@CPACK_RPM_PACKAGE_VENDOR\@ \@TMP_RPM_URL\@ \@TMP_RPM_REQUIRES\@ +\@TMP_RPM_REQUIRES_PRE\@ +\@TMP_RPM_REQUIRES_POST\@ +\@TMP_RPM_REQUIRES_PREUN\@ +\@TMP_RPM_REQUIRES_POSTUN\@ \@TMP_RPM_PROVIDES\@ \@TMP_RPM_OBSOLETES\@ \@TMP_RPM_CONFLICTS\@ @@ -1100,3 +1203,15 @@ else() message(FATAL_ERROR "RPM packaging through alien not done (yet)") endif() endif() + +# reset variables from temporary variables +if(CPACK_RPM_PACKAGE_SUMMARY_) + set(CPACK_RPM_PACKAGE_SUMMARY ${CPACK_RPM_PACKAGE_SUMMARY_}) +else() + unset(CPACK_RPM_PACKAGE_SUMMARY) +endif() +if(CPACK_RPM_PACKAGE_DESCRIPTION_) + set(CPACK_RPM_PACKAGE_DESCRIPTION ${CPACK_RPM_PACKAGE_DESCRIPTION_}) +else() + unset(CPACK_RPM_PACKAGE_DESCRIPTION) +endif() diff --git a/Modules/CheckStructHasMember.cmake b/Modules/CheckStructHasMember.cmake index c8949cf..de31d2c 100644 --- a/Modules/CheckStructHasMember.cmake +++ b/Modules/CheckStructHasMember.cmake @@ -69,8 +69,7 @@ macro (CHECK_STRUCT_HAS_MEMBER _STRUCT _MEMBER _HEADER _RESULT) ${_INCLUDE_FILES} int main() { - ${_STRUCT}* tmp; - (void) tmp->${_MEMBER}; + (void)((${_STRUCT} *)0)->${_MEMBER}; return 0; } ") diff --git a/Modules/Compiler/AppleClang-CXX.cmake b/Modules/Compiler/AppleClang-CXX.cmake index 0372e18..c1acae6 100644 --- a/Modules/Compiler/AppleClang-CXX.cmake +++ b/Modules/Compiler/AppleClang-CXX.cmake @@ -1,6 +1,6 @@ include(Compiler/Clang) __compiler_clang(CXX) -if(NOT CMAKE_CXX_SIMULATE_ID STREQUAL "MSVC") +if(NOT "x${CMAKE_CXX_SIMULATE_ID}" STREQUAL "xMSVC") set(CMAKE_CXX_COMPILE_OPTIONS_VISIBILITY_INLINES_HIDDEN "-fvisibility-inlines-hidden") endif() diff --git a/Modules/Compiler/Clang-C.cmake b/Modules/Compiler/Clang-C.cmake index 05d3c0b..ebd5c43 100644 --- a/Modules/Compiler/Clang-C.cmake +++ b/Modules/Compiler/Clang-C.cmake @@ -6,7 +6,7 @@ if(WIN32 OR (APPLE AND NOT appleClangPolicy STREQUAL NEW)) return() endif() -if(NOT CMAKE_CXX_COMPILER_VERSION VERSION_LESS 3.4) +if(NOT CMAKE_C_COMPILER_VERSION VERSION_LESS 3.4) set(CMAKE_C90_STANDARD_COMPILE_OPTION "-std=c90") set(CMAKE_C90_EXTENSION_COMPILE_OPTION "-std=gnu90") @@ -17,20 +17,24 @@ if(NOT CMAKE_CXX_COMPILER_VERSION VERSION_LESS 3.4) set(CMAKE_C11_EXTENSION_COMPILE_OPTION "-std=gnu11") endif() -set(CMAKE_C_STANDARD_DEFAULT 90) +if(NOT CMAKE_C_COMPILER_VERSION VERSION_LESS 3.6) + set(CMAKE_C_STANDARD_DEFAULT 11) +elseif(NOT CMAKE_C_COMPILER_VERSION VERSION_LESS 3.4) + set(CMAKE_C_STANDARD_DEFAULT 99) +endif() macro(cmake_record_c_compile_features) macro(_get_clang_features std_version list) - record_compiler_features(C "-std=${std_version}" ${list}) + record_compiler_features(C "${std_version}" ${list}) endmacro() - if (UNIX AND NOT CMAKE_CXX_COMPILER_VERSION VERSION_LESS 3.4) - _get_clang_features(c11 CMAKE_C11_COMPILE_FEATURES) + if (UNIX AND NOT CMAKE_C_COMPILER_VERSION VERSION_LESS 3.4) + _get_clang_features(${CMAKE_C11_STANDARD_COMPILE_OPTION} CMAKE_C11_COMPILE_FEATURES) if (_result EQUAL 0) - _get_clang_features(c99 CMAKE_C99_COMPILE_FEATURES) + _get_clang_features(${CMAKE_C99_STANDARD_COMPILE_OPTION} CMAKE_C99_COMPILE_FEATURES) endif() if (_result EQUAL 0) - _get_clang_features(c90 CMAKE_C90_COMPILE_FEATURES) + _get_clang_features(${CMAKE_C90_STANDARD_COMPILE_OPTION} CMAKE_C90_COMPILE_FEATURES) endif() else() set(_result 0) diff --git a/Modules/Compiler/Clang-CXX-FeatureTests.cmake b/Modules/Compiler/Clang-CXX-FeatureTests.cmake index 4c532fb..df2e1a8 100644 --- a/Modules/Compiler/Clang-CXX-FeatureTests.cmake +++ b/Modules/Compiler/Clang-CXX-FeatureTests.cmake @@ -2,61 +2,9 @@ # Reference: http://clang.llvm.org/cxx_status.html # http://clang.llvm.org/docs/LanguageExtensions.html -set(testable_features - cxx_alias_templates - cxx_alignas - cxx_attributes - cxx_auto_type - cxx_binary_literals - cxx_constexpr - cxx_contextual_conversions - cxx_decltype - cxx_decltype_incomplete_return_types - cxx_default_function_template_args - cxx_defaulted_functions - cxx_delegating_constructors - cxx_deleted_functions - cxx_explicit_conversions - cxx_generalized_initializers - cxx_inheriting_constructors - cxx_lambdas - cxx_local_type_template_args - cxx_noexcept - cxx_nonstatic_member_init - cxx_nullptr - cxx_range_for - cxx_raw_string_literals - cxx_reference_qualified_functions - cxx_relaxed_constexpr - cxx_return_type_deduction - cxx_rvalue_references - cxx_static_assert - cxx_strong_enums - cxx_thread_local - cxx_unicode_literals - cxx_unrestricted_unions - cxx_user_literals - cxx_variable_templates - cxx_variadic_templates -) - set(_cmake_oldestSupported "((__clang_major__ * 100) + __clang_minor__) >= 304") -foreach(feature ${testable_features}) - set(_cmake_feature_test_${feature} "${_cmake_oldestSupported} && __has_feature(${feature})") -endforeach() - -unset(testable_features) - -set(_cmake_feature_test_cxx_aggregate_default_initializers "${_cmake_oldestSupported} && __has_feature(cxx_aggregate_nsdmi)") - -set(_cmake_feature_test_cxx_trailing_return_types "${_cmake_oldestSupported} && __has_feature(cxx_trailing_return)") -set(_cmake_feature_test_cxx_alignof "${_cmake_oldestSupported} && __has_feature(cxx_alignas)") -set(_cmake_feature_test_cxx_final "${_cmake_oldestSupported} && __has_feature(cxx_override_control)") -set(_cmake_feature_test_cxx_override "${_cmake_oldestSupported} && __has_feature(cxx_override_control)") -set(_cmake_feature_test_cxx_uniform_initialization "${_cmake_oldestSupported} && __has_feature(cxx_generalized_initializers)") -set(_cmake_feature_test_cxx_defaulted_move_initializers "${_cmake_oldestSupported} && __has_feature(cxx_defaulted_functions)") -set(_cmake_feature_test_cxx_lambda_init_captures "${_cmake_oldestSupported} && __has_feature(cxx_init_captures)") +include("${CMAKE_CURRENT_LIST_DIR}/Clang-CXX-TestableFeatures.cmake") set(Clang34_CXX14 "((__clang_major__ * 100) + __clang_minor__) >= 304 && __cplusplus > 201103L") # http://llvm.org/bugs/show_bug.cgi?id=19242 diff --git a/Modules/Compiler/Clang-CXX-TestableFeatures.cmake b/Modules/Compiler/Clang-CXX-TestableFeatures.cmake new file mode 100644 index 0000000..b39475c --- /dev/null +++ b/Modules/Compiler/Clang-CXX-TestableFeatures.cmake @@ -0,0 +1,54 @@ + +set(testable_features + cxx_alias_templates + cxx_alignas + cxx_attributes + cxx_auto_type + cxx_binary_literals + cxx_constexpr + cxx_contextual_conversions + cxx_decltype + cxx_decltype_incomplete_return_types + cxx_default_function_template_args + cxx_defaulted_functions + cxx_delegating_constructors + cxx_deleted_functions + cxx_explicit_conversions + cxx_generalized_initializers + cxx_inheriting_constructors + cxx_lambdas + cxx_local_type_template_args + cxx_noexcept + cxx_nonstatic_member_init + cxx_nullptr + cxx_range_for + cxx_raw_string_literals + cxx_reference_qualified_functions + cxx_relaxed_constexpr + cxx_return_type_deduction + cxx_rvalue_references + cxx_static_assert + cxx_strong_enums + cxx_thread_local + cxx_unicode_literals + cxx_unrestricted_unions + cxx_user_literals + cxx_variable_templates + cxx_variadic_templates +) + +foreach(feature ${testable_features}) + set(_cmake_feature_test_${feature} "${_cmake_oldestSupported} && __has_feature(${feature})") +endforeach() + +unset(testable_features) + +set(_cmake_feature_test_cxx_aggregate_default_initializers "${_cmake_oldestSupported} && __has_feature(cxx_aggregate_nsdmi)") + +set(_cmake_feature_test_cxx_trailing_return_types "${_cmake_oldestSupported} && __has_feature(cxx_trailing_return)") +set(_cmake_feature_test_cxx_alignof "${_cmake_oldestSupported} && __has_feature(cxx_alignas)") +set(_cmake_feature_test_cxx_final "${_cmake_oldestSupported} && __has_feature(cxx_override_control)") +set(_cmake_feature_test_cxx_override "${_cmake_oldestSupported} && __has_feature(cxx_override_control)") +set(_cmake_feature_test_cxx_uniform_initialization "${_cmake_oldestSupported} && __has_feature(cxx_generalized_initializers)") +set(_cmake_feature_test_cxx_defaulted_move_initializers "${_cmake_oldestSupported} && __has_feature(cxx_defaulted_functions)") +set(_cmake_feature_test_cxx_lambda_init_captures "${_cmake_oldestSupported} && __has_feature(cxx_init_captures)") diff --git a/Modules/Compiler/Clang-CXX.cmake b/Modules/Compiler/Clang-CXX.cmake index 5dd7b4a..6fe0b56 100644 --- a/Modules/Compiler/Clang-CXX.cmake +++ b/Modules/Compiler/Clang-CXX.cmake @@ -1,7 +1,7 @@ include(Compiler/Clang) __compiler_clang(CXX) -if(NOT CMAKE_CXX_SIMULATE_ID STREQUAL "MSVC") +if(NOT "x${CMAKE_CXX_SIMULATE_ID}" STREQUAL "xMSVC") set(CMAKE_CXX_COMPILE_OPTIONS_VISIBILITY_INLINES_HIDDEN "-fvisibility-inlines-hidden") endif() @@ -35,16 +35,16 @@ set(CMAKE_CXX_STANDARD_DEFAULT 98) macro(cmake_record_cxx_compile_features) macro(_get_clang_features std_version list) - record_compiler_features(CXX "-std=${std_version}" ${list}) + record_compiler_features(CXX "${std_version}" ${list}) endmacro() if (UNIX AND NOT CMAKE_CXX_COMPILER_VERSION VERSION_LESS 3.4) - _get_clang_features(c++1y CMAKE_CXX14_COMPILE_FEATURES) + _get_clang_features(${CMAKE_CXX14_STANDARD_COMPILE_OPTION} CMAKE_CXX14_COMPILE_FEATURES) if (_result EQUAL 0) - _get_clang_features(c++11 CMAKE_CXX11_COMPILE_FEATURES) + _get_clang_features(${CMAKE_CXX11_STANDARD_COMPILE_OPTION} CMAKE_CXX11_COMPILE_FEATURES) endif() if (_result EQUAL 0) - _get_clang_features(c++98 CMAKE_CXX98_COMPILE_FEATURES) + _get_clang_features(${CMAKE_CXX98_STANDARD_COMPILE_OPTION} CMAKE_CXX98_COMPILE_FEATURES) endif() else() set(_result 0) diff --git a/Modules/Compiler/Clang.cmake b/Modules/Compiler/Clang.cmake index eeba119..701089c 100644 --- a/Modules/Compiler/Clang.cmake +++ b/Modules/Compiler/Clang.cmake @@ -18,8 +18,8 @@ if(__COMPILER_CLANG) endif() set(__COMPILER_CLANG 1) -if(CMAKE_C_SIMULATE_ID STREQUAL "MSVC" - OR CMAKE_CXX_SIMULATE_ID STREQUAL "MSVC") +if("x${CMAKE_C_SIMULATE_ID}" STREQUAL "xMSVC" + OR "x${CMAKE_CXX_SIMULATE_ID}" STREQUAL "xMSVC") macro(__compiler_clang lang) endmacro() else() diff --git a/Modules/Compiler/GNU-C.cmake b/Modules/Compiler/GNU-C.cmake index 35954be..9018450 100644 --- a/Modules/Compiler/GNU-C.cmake +++ b/Modules/Compiler/GNU-C.cmake @@ -12,21 +12,24 @@ if (NOT CMAKE_C_COMPILER_VERSION VERSION_LESS 4.7) set(CMAKE_C11_EXTENSION_COMPILE_OPTION "-std=gnu11") endif() -# This may change in a future GNU version. -set(CMAKE_C_STANDARD_DEFAULT 90) +if (NOT CMAKE_C_COMPILER_VERSION VERSION_LESS 5.0) + set(CMAKE_C_STANDARD_DEFAULT 11) +else(NOT CMAKE_C_COMPILER_VERSION VERSION_LESS 4.7) + set(CMAKE_C_STANDARD_DEFAULT 90) +endif() macro(cmake_record_c_compile_features) macro(_get_gcc_features std_version list) - record_compiler_features(C "-std=${std_version}" ${list}) + record_compiler_features(C "${std_version}" ${list}) endmacro() if (UNIX AND NOT APPLE AND NOT CMAKE_C_COMPILER_VERSION VERSION_LESS 4.7) - _get_gcc_features(c90 CMAKE_C90_COMPILE_FEATURES) + _get_gcc_features(${CMAKE_C11_STANDARD_COMPILE_OPTION} CMAKE_C11_COMPILE_FEATURES) if (_result EQUAL 0) - _get_gcc_features(c99 CMAKE_C99_COMPILE_FEATURES) + _get_gcc_features(${CMAKE_C99_STANDARD_COMPILE_OPTION} CMAKE_C99_COMPILE_FEATURES) endif() if (_result EQUAL 0) - _get_gcc_features(c11 CMAKE_C11_COMPILE_FEATURES) + _get_gcc_features(${CMAKE_C90_STANDARD_COMPILE_OPTION} CMAKE_C90_COMPILE_FEATURES) endif() else() set(_result 0) diff --git a/Modules/Compiler/GNU-CXX.cmake b/Modules/Compiler/GNU-CXX.cmake index 14dc76a..a91c901 100644 --- a/Modules/Compiler/GNU-CXX.cmake +++ b/Modules/Compiler/GNU-CXX.cmake @@ -11,7 +11,8 @@ else() endif() endif() -if(NOT CMAKE_CXX_COMPILER_VERSION VERSION_LESS 4.3) +if(NOT CMAKE_CXX_COMPILER_VERSION VERSION_LESS 4.7) + # Supported since 4.3 set(CMAKE_CXX98_STANDARD_COMPILE_OPTION "-std=c++98") set(CMAKE_CXX98_EXTENSION_COMPILE_OPTION "-std=gnu++98") endif() @@ -19,12 +20,13 @@ endif() if (NOT CMAKE_CXX_COMPILER_VERSION VERSION_LESS 4.7) set(CMAKE_CXX11_STANDARD_COMPILE_OPTION "-std=c++11") set(CMAKE_CXX11_EXTENSION_COMPILE_OPTION "-std=gnu++11") -elseif(NOT CMAKE_CXX_COMPILER_VERSION VERSION_LESS 4.3) - set(CMAKE_CXX11_STANDARD_COMPILE_OPTION "-std=c++0x") - set(CMAKE_CXX11_EXTENSION_COMPILE_OPTION "-std=gnu++0x") + # 4.3 supports 0x variants endif() -if (NOT CMAKE_CXX_COMPILER_VERSION VERSION_LESS 4.8) +if (NOT CMAKE_CXX_COMPILER_VERSION VERSION_LESS 4.9) + set(CMAKE_CXX14_STANDARD_COMPILE_OPTION "-std=c++14") + set(CMAKE_CXX14_EXTENSION_COMPILE_OPTION "-std=gnu++14") +elseif (NOT CMAKE_CXX_COMPILER_VERSION VERSION_LESS 4.8) set(CMAKE_CXX14_STANDARD_COMPILE_OPTION "-std=c++1y") set(CMAKE_CXX14_EXTENSION_COMPILE_OPTION "-std=gnu++1y") endif() @@ -33,19 +35,19 @@ set(CMAKE_CXX_STANDARD_DEFAULT 98) macro(cmake_record_cxx_compile_features) macro(_get_gcc_features std_version list) - record_compiler_features(CXX "-std=${std_version}" ${list}) + record_compiler_features(CXX "${std_version}" ${list}) endmacro() set(_result 0) if (UNIX AND NOT APPLE AND NOT CMAKE_CXX_COMPILER_VERSION VERSION_LESS 4.8) - _get_gcc_features(c++1y CMAKE_CXX14_COMPILE_FEATURES) + _get_gcc_features(${CMAKE_CXX14_STANDARD_COMPILE_OPTION} CMAKE_CXX14_COMPILE_FEATURES) endif() if (UNIX AND NOT APPLE AND NOT CMAKE_CXX_COMPILER_VERSION VERSION_LESS 4.7) if (_result EQUAL 0) - _get_gcc_features(c++11 CMAKE_CXX11_COMPILE_FEATURES) + _get_gcc_features(${CMAKE_CXX11_STANDARD_COMPILE_OPTION} CMAKE_CXX11_COMPILE_FEATURES) endif() if (_result EQUAL 0) - _get_gcc_features(c++98 CMAKE_CXX98_COMPILE_FEATURES) + _get_gcc_features(${CMAKE_CXX98_STANDARD_COMPILE_OPTION} CMAKE_CXX98_COMPILE_FEATURES) endif() else() set(_result 0) diff --git a/Modules/Compiler/GNU-Fortran.cmake b/Modules/Compiler/GNU-Fortran.cmake index 313ccbd..dfd7927 100644 --- a/Modules/Compiler/GNU-Fortran.cmake +++ b/Modules/Compiler/GNU-Fortran.cmake @@ -8,10 +8,5 @@ set(CMAKE_Fortran_FORMAT_FREE_FLAG "-ffree-form") set(CMAKE_Fortran_FLAGS_MINSIZEREL_INIT "-Os") set(CMAKE_Fortran_FLAGS_RELEASE_INIT "-O3") -# We require updates to CMake C++ code to support preprocessing rules -# for Fortran. -set(CMAKE_Fortran_CREATE_PREPROCESSED_SOURCE) -set(CMAKE_Fortran_CREATE_ASSEMBLY_SOURCE) - # Fortran-specific feature flags. set(CMAKE_Fortran_MODDIR_FLAG -J) diff --git a/Modules/Compiler/HP-Fortran.cmake b/Modules/Compiler/HP-Fortran.cmake index cc56b46..ad821ab 100644 --- a/Modules/Compiler/HP-Fortran.cmake +++ b/Modules/Compiler/HP-Fortran.cmake @@ -1,3 +1,6 @@ set(CMAKE_Fortran_VERBOSE_FLAG "-v") set(CMAKE_Fortran_FORMAT_FIXED_FLAG "+source=fixed") set(CMAKE_Fortran_FORMAT_FREE_FLAG "+source=free") + +set(CMAKE_Fortran_CREATE_ASSEMBLY_SOURCE "<CMAKE_Fortran_COMPILER> <DEFINES> <FLAGS> -S <SOURCE> -o <ASSEMBLY_SOURCE>") +set(CMAKE_Fortran_CREATE_PREPROCESSED_SOURCE "<CMAKE_Fortran_COMPILER> <DEFINES> <FLAGS> -E <SOURCE> > <PREPROCESSED_SOURCE>") diff --git a/Modules/Compiler/Intel-Fortran.cmake b/Modules/Compiler/Intel-Fortran.cmake index 84f6182..9ebac5a 100644 --- a/Modules/Compiler/Intel-Fortran.cmake +++ b/Modules/Compiler/Intel-Fortran.cmake @@ -7,3 +7,6 @@ set(CMAKE_Fortran_MODDIR_FLAG "-module ") set(CMAKE_Fortran_VERBOSE_FLAG "-v") set(CMAKE_Fortran_FORMAT_FIXED_FLAG "-fixed") set(CMAKE_Fortran_FORMAT_FREE_FLAG "-free") + +set(CMAKE_Fortran_CREATE_PREPROCESSED_SOURCE "<CMAKE_Fortran_COMPILER> <DEFINES> <FLAGS> -E <SOURCE> > <PREPROCESSED_SOURCE>") +set(CMAKE_Fortran_CREATE_ASSEMBLY_SOURCE "<CMAKE_Fortran_COMPILER> <DEFINES> <FLAGS> -S <SOURCE> -o <ASSEMBLY_SOURCE>") diff --git a/Modules/Compiler/PGI-Fortran.cmake b/Modules/Compiler/PGI-Fortran.cmake index 264c23e..2866254 100644 --- a/Modules/Compiler/PGI-Fortran.cmake +++ b/Modules/Compiler/PGI-Fortran.cmake @@ -7,9 +7,4 @@ set(CMAKE_Fortran_FORMAT_FREE_FLAG "-Mfreeform") set(CMAKE_Fortran_FLAGS_INIT "${CMAKE_Fortran_FLAGS_INIT} -Mpreprocess -Kieee") set(CMAKE_Fortran_FLAGS_DEBUG_INIT "${CMAKE_Fortran_FLAGS_DEBUG_INIT} -Mbounds") -# We require updates to CMake C++ code to support preprocessing rules -# for Fortran. -set(CMAKE_Fortran_CREATE_PREPROCESSED_SOURCE) -set(CMAKE_Fortran_CREATE_ASSEMBLY_SOURCE) - set(CMAKE_Fortran_MODDIR_FLAG "-module ") diff --git a/Modules/Compiler/SunPro-Fortran.cmake b/Modules/Compiler/SunPro-Fortran.cmake index 18e75b9..c38d5a5 100644 --- a/Modules/Compiler/SunPro-Fortran.cmake +++ b/Modules/Compiler/SunPro-Fortran.cmake @@ -16,3 +16,6 @@ set(CMAKE_Fortran_FLAGS_RELEASE_INIT "-xO3 -DNDEBUG") set(CMAKE_Fortran_FLAGS_RELWITHDEBINFO_INIT "-g -xO2 -DNDEBUG") set(CMAKE_Fortran_MODDIR_FLAG "-moddir=") set(CMAKE_Fortran_MODPATH_FLAG "-M") + +set(CMAKE_Fortran_CREATE_PREPROCESSED_SOURCE "<CMAKE_Fortran_COMPILER> <DEFINES> <FLAGS> -E <SOURCE> > <PREPROCESSED_SOURCE>") +set(CMAKE_Fortran_CREATE_ASSEMBLY_SOURCE "<CMAKE_Fortran_COMPILER> <DEFINES> <FLAGS> -S <SOURCE> -o <ASSEMBLY_SOURCE>") diff --git a/Modules/Compiler/XL-Fortran.cmake b/Modules/Compiler/XL-Fortran.cmake index f1c9158..ae9df4e 100644 --- a/Modules/Compiler/XL-Fortran.cmake +++ b/Modules/Compiler/XL-Fortran.cmake @@ -12,6 +12,6 @@ set(CMAKE_Fortran_DEFINE_FLAG "-WF,-D") # -qhalt=e = Halt on error messages (rather than just severe errors) set(CMAKE_Fortran_FLAGS_INIT "-qthreaded -qhalt=e") -# We require updates to CMake C++ code to support preprocessing rules for Fortran. +# xlf: 1501-214 (W) command option E reserved for future use - ignored set(CMAKE_Fortran_CREATE_PREPROCESSED_SOURCE) set(CMAKE_Fortran_CREATE_ASSEMBLY_SOURCE) diff --git a/Modules/ExternalProject.cmake b/Modules/ExternalProject.cmake index 8832950..e5616b1 100644 --- a/Modules/ExternalProject.cmake +++ b/Modules/ExternalProject.cmake @@ -1,187 +1,340 @@ -#.rst: -# ExternalProject -# --------------- -# -# Create custom targets to build projects in external trees -# -# The ``ExternalProject_Add`` function creates a custom target to drive -# download, update/patch, configure, build, install and test steps of an -# external project: -# -# .. code-block:: cmake -# -# ExternalProject_Add(<name> # Name for custom target -# [DEPENDS projects...] # Targets on which the project depends -# [PREFIX dir] # Root dir for entire project -# [LIST_SEPARATOR sep] # Sep to be replaced by ; in cmd lines -# [TMP_DIR dir] # Directory to store temporary files -# [STAMP_DIR dir] # Directory to store step timestamps -# [EXCLUDE_FROM_ALL 1] # The "all" target does not depend on this -# #--Download step-------------- -# [DOWNLOAD_NAME fname] # File name to store (if not end of URL) -# [DOWNLOAD_DIR dir] # Directory to store downloaded files -# [DOWNLOAD_COMMAND cmd...] # Command to download source tree -# [DOWNLOAD_NO_PROGRESS 1] # Disable download progress reports -# [CVS_REPOSITORY cvsroot] # CVSROOT of CVS repository -# [CVS_MODULE mod] # Module to checkout from CVS repo -# [CVS_TAG tag] # Tag to checkout from CVS repo -# [SVN_REPOSITORY url] # URL of Subversion repo -# [SVN_REVISION -r<rev>] # Revision to checkout from Subversion repo -# [SVN_USERNAME john ] # Username for Subversion checkout and update -# [SVN_PASSWORD doe ] # Password for Subversion checkout and update -# [SVN_TRUST_CERT 1 ] # Trust the Subversion server site certificate -# [GIT_REPOSITORY url] # URL of git repo -# [GIT_TAG tag] # Git branch name, commit id or tag -# [GIT_SUBMODULES modules...] # Git submodules that shall be updated, all if empty -# [HG_REPOSITORY url] # URL of mercurial repo -# [HG_TAG tag] # Mercurial branch name, commit id or tag -# [URL /.../src.tgz] # Full path or URL of source -# [URL_HASH ALGO=value] # Hash of file at URL -# [URL_MD5 md5] # Equivalent to URL_HASH MD5=md5 -# [TLS_VERIFY bool] # Should certificate for https be checked -# [TLS_CAINFO file] # Path to a certificate authority file -# [TIMEOUT seconds] # Time allowed for file download operations -# #--Update/Patch step---------- -# [UPDATE_COMMAND cmd...] # Source work-tree update command -# [PATCH_COMMAND cmd...] # Command to patch downloaded source -# #--Configure step------------- -# [SOURCE_DIR dir] # Source dir to be used for build -# [CONFIGURE_COMMAND cmd...] # Build tree configuration command -# [CMAKE_COMMAND /.../cmake] # Specify alternative cmake executable -# [CMAKE_GENERATOR gen] # Specify generator for native build -# [CMAKE_GENERATOR_PLATFORM p] # Generator-specific platform name -# [CMAKE_GENERATOR_TOOLSET t] # Generator-specific toolset name -# [CMAKE_ARGS args...] # Arguments to CMake command line -# [CMAKE_CACHE_ARGS args...] # Initial cache args with form -Dvar:string=on -# #--Build step----------------- -# [BINARY_DIR dir] # Specify build dir location -# [BUILD_COMMAND cmd...] # Command to drive the native build -# [BUILD_IN_SOURCE 1] # Use source dir for build dir -# [BUILD_ALWAYS 1] # No stamp file, build step always runs -# #--Install step--------------- -# [INSTALL_DIR dir] # Installation prefix -# [INSTALL_COMMAND cmd...] # Command to drive install after build -# #--Test step------------------ -# [TEST_BEFORE_INSTALL 1] # Add test step executed before install step -# [TEST_AFTER_INSTALL 1] # Add test step executed after install step -# [TEST_COMMAND cmd...] # Command to drive test -# #--Output logging------------- -# [LOG_DOWNLOAD 1] # Wrap download in script to log output -# [LOG_UPDATE 1] # Wrap update in script to log output -# [LOG_CONFIGURE 1] # Wrap configure in script to log output -# [LOG_BUILD 1] # Wrap build in script to log output -# [LOG_TEST 1] # Wrap test in script to log output -# [LOG_INSTALL 1] # Wrap install in script to log output -# #--Custom targets------------- -# [STEP_TARGETS st1 st2 ...] # Generate custom targets for these steps -# ) -# -# The ``*_DIR`` options specify directories for the project, with default -# directories computed as follows. If the ``PREFIX`` option is given to -# ``ExternalProject_Add()`` or the ``EP_PREFIX`` directory property is set, -# then an external project is built and installed under the specified prefix:: -# -# TMP_DIR = <prefix>/tmp -# STAMP_DIR = <prefix>/src/<name>-stamp -# DOWNLOAD_DIR = <prefix>/src -# SOURCE_DIR = <prefix>/src/<name> -# BINARY_DIR = <prefix>/src/<name>-build -# INSTALL_DIR = <prefix> -# -# Otherwise, if the ``EP_BASE`` directory property is set then components -# of an external project are stored under the specified base:: -# -# TMP_DIR = <base>/tmp/<name> -# STAMP_DIR = <base>/Stamp/<name> -# DOWNLOAD_DIR = <base>/Download/<name> -# SOURCE_DIR = <base>/Source/<name> -# BINARY_DIR = <base>/Build/<name> -# INSTALL_DIR = <base>/Install/<name> -# -# If no ``PREFIX``, ``EP_PREFIX``, or ``EP_BASE`` is specified then the -# default is to set ``PREFIX`` to ``<name>-prefix``. Relative paths are -# interpreted with respect to the build directory corresponding to the -# source directory in which ``ExternalProject_Add`` is invoked. -# -# If ``SOURCE_DIR`` is explicitly set to an existing directory the project -# will be built from it. Otherwise a download step must be specified -# using one of the ``DOWNLOAD_COMMAND``, ``CVS_*``, ``SVN_*``, or ``URL`` -# options. The ``URL`` option may refer locally to a directory or source -# tarball, or refer to a remote tarball (e.g. ``http://.../src.tgz``). -# -# The ``ExternalProject_Add_Step`` function adds a custom step to an -# external project: -# -# .. code-block:: cmake -# -# ExternalProject_Add_Step(<name> <step> # Names of project and custom step -# [COMMAND cmd...] # Command line invoked by this step -# [COMMENT "text..."] # Text printed when step executes -# [DEPENDEES steps...] # Steps on which this step depends -# [DEPENDERS steps...] # Steps that depend on this step -# [DEPENDS files...] # Files on which this step depends -# [ALWAYS 1] # No stamp file, step always runs -# [EXCLUDE_FROM_MAIN 1] # Main target does not depend on this step -# [WORKING_DIRECTORY dir] # Working directory for command -# [LOG 1] # Wrap step in script to log output -# ) -# -# The command line, comment, and working directory of every standard and -# custom step is processed to replace tokens ``<SOURCE_DIR>``, -# ``<BINARY_DIR>``, ``<INSTALL_DIR>``, and ``<TMP_DIR>`` with -# corresponding property values. -# -# Any builtin step that specifies a ``<step>_COMMAND cmd...`` or custom -# step that specifies a ``COMMAND cmd...`` may specify additional command -# lines using the form ``COMMAND cmd...``. At build time the commands -# will be executed in order and aborted if any one fails. For example:: -# -# ... BUILD_COMMAND make COMMAND echo done ... -# -# specifies to run ``make`` and then ``echo done`` during the build step. -# Whether the current working directory is preserved between commands is -# not defined. Behavior of shell operators like ``&&`` is not defined. -# -# The ``ExternalProject_Get_Property`` function retrieves external project -# target properties:: -# -# ExternalProject_Get_Property(<name> [prop1 [prop2 [...]]]) -# -# It stores property values in variables of the same name. Property -# names correspond to the keyword argument names of -# ``ExternalProject_Add``. -# -# The ``ExternalProject_Add_StepTargets`` function generates custom -# targets for the steps listed:: -# -# ExternalProject_Add_StepTargets(<name> [step1 [step2 [...]]]) -# -# If ``STEP_TARGETS`` is set then ``ExternalProject_Add_StepTargets`` is -# automatically called at the end of matching calls to -# ``ExternalProject_Add_Step``. Pass ``STEP_TARGETS`` explicitly to -# individual ``ExternalProject_Add`` calls, or implicitly to all -# ``ExternalProject_Add`` calls by setting the directory property -# ``EP_STEP_TARGETS``. -# -# If ``STEP_TARGETS`` is not set, clients may still manually call -# ``ExternalProject_Add_StepTargets`` after calling -# ``ExternalProject_Add`` or ``ExternalProject_Add_Step``. -# -# This functionality is provided to make it easy to drive the steps -# independently of each other by specifying targets on build command -# lines. For example, you may be submitting to a sub-project based -# dashboard, where you want to drive the configure portion of the build, -# then submit to the dashboard, followed by the build portion, followed -# by tests. If you invoke a custom target that depends on a step -# halfway through the step dependency chain, then all the previous steps -# will also run to ensure everything is up to date. -# -# For example, to drive configure, build and test steps independently -# for each ``ExternalProject_Add`` call in your project, write the following -# line prior to any ``ExternalProject_Add`` calls in your ``CMakeLists.txt`` -# file:: -# -# set_property(DIRECTORY PROPERTY EP_STEP_TARGETS configure build test) +#[=======================================================================[.rst: +ExternalProject +--------------- + +Create custom targets to build projects in external trees + +.. command:: ExternalProject_Add + + The ``ExternalProject_Add`` function creates a custom target to drive + download, update/patch, configure, build, install and test steps of an + external project:: + + ExternalProject_Add(<name> [<option>...]) + + General options are: + + ``DEPENDS <projects>...`` + Targets on which the project depends + ``PREFIX <dir>`` + Root dir for entire project + ``LIST_SEPARATOR <sep>`` + Sep to be replaced by ; in cmd lines + ``TMP_DIR <dir>`` + Directory to store temporary files + ``STAMP_DIR <dir>`` + Directory to store step timestamps + ``EXCLUDE_FROM_ALL 1`` + The "all" target does not depend on this + + Download step options are: + + ``DOWNLOAD_NAME <fname>`` + File name to store (if not end of URL) + ``DOWNLOAD_DIR <dir>`` + Directory to store downloaded files + ``DOWNLOAD_COMMAND <cmd>...`` + Command to download source tree + ``DOWNLOAD_NO_PROGRESS 1`` + Disable download progress reports + ``CVS_REPOSITORY <cvsroot>`` + CVSROOT of CVS repository + ``CVS_MODULE <mod>`` + Module to checkout from CVS repo + ``CVS_TAG <tag>`` + Tag to checkout from CVS repo + ``SVN_REPOSITORY <url>`` + URL of Subversion repo + ``SVN_REVISION -r<rev>`` + Revision to checkout from Subversion repo + ``SVN_USERNAME <username>`` + Username for Subversion checkout and update + ``SVN_PASSWORD <password>`` + Password for Subversion checkout and update + ``SVN_TRUST_CERT 1`` + Trust the Subversion server site certificate + ``GIT_REPOSITORY <url>`` + URL of git repo + ``GIT_TAG <tag>`` + Git branch name, commit id or tag + ``GIT_SUBMODULES <module>...`` + Git submodules that shall be updated, all if empty + ``HG_REPOSITORY <url>`` + URL of mercurial repo + ``HG_TAG <tag>`` + Mercurial branch name, commit id or tag + ``URL /.../src.tgz`` + Full path or URL of source + ``URL_HASH ALGO=value`` + Hash of file at URL + ``URL_MD5 md5`` + Equivalent to URL_HASH MD5=md5 + ``TLS_VERIFY <bool>`` + Should certificate for https be checked + ``TLS_CAINFO <file>`` + Path to a certificate authority file + ``TIMEOUT <seconds>`` + Time allowed for file download operations + + Update/Patch step options are: + + ``UPDATE_COMMAND <cmd>...`` + Source work-tree update command + ``UPDATE_DISCONNECTED 1`` + Never update automatically from the remote repository + ``PATCH_COMMAND <cmd>...`` + Command to patch downloaded source + + Configure step options are: + + ``SOURCE_DIR <dir>`` + Source dir to be used for build + ``CONFIGURE_COMMAND <cmd>...`` + Build tree configuration command + ``CMAKE_COMMAND /.../cmake`` + Specify alternative cmake executable + ``CMAKE_GENERATOR <gen>`` + Specify generator for native build + ``CMAKE_GENERATOR_PLATFORM <platform>`` + Generator-specific platform name + ``CMAKE_GENERATOR_TOOLSET <toolset>`` + Generator-specific toolset name + ``CMAKE_ARGS <arg>...`` + Arguments to CMake command line. + These arguments are passed to CMake command line, and can contain + arguments other than cache values, see also + :manual:`CMake Options <cmake(1)>`. Arguments in the form + ``-Dvar:string=on`` are always passed to the command line, and + therefore cannot be changed by the user. + ``CMAKE_CACHE_ARGS <arg>...`` + Initial cache arguments, of the form ``-Dvar:string=on``. + These arguments are written in a pre-load a script that populates + CMake cache, see also :manual:`cmake -C <cmake(1)>`. This allows to + overcome command line length limits. + These arguments are :command:`set` using the ``FORCE`` argument, + and therefore cannot be changed by the user. + ``CMAKE_CACHE_DEFAULT_ARGS <arg>...`` + Initial default cache arguments, of the form ``-Dvar:string=on``. + These arguments are written in a pre-load a script that populates + CMake cache, see also :manual:`cmake -C <cmake(1)>`. This allows to + overcome command line length limits. + These arguments can be used as default value that will be set if no + previous value is found in the cache, and that the user can change + later. + + Build step options are: + + ``BINARY_DIR <dir>`` + Specify build dir location + ``BUILD_COMMAND <cmd>...`` + Command to drive the native build + ``BUILD_IN_SOURCE 1`` + Use source dir for build dir + ``BUILD_ALWAYS 1`` + No stamp file, build step always runs + ``BUILD_BYPRODUCTS <file>...`` + Files that will be generated by the build command but may or may + not have their modification time updated by subsequent builds. + + Install step options are: + + ``INSTALL_DIR <dir>`` + Installation prefix + ``INSTALL_COMMAND <cmd>...`` + Command to drive install after build + + Test step options are: + + ``TEST_BEFORE_INSTALL 1`` + Add test step executed before install step + ``TEST_AFTER_INSTALL 1`` + Add test step executed after install step + ``TEST_COMMAND <cmd>...`` + Command to drive test + + Output logging options are: + + ``LOG_DOWNLOAD 1`` + Wrap download in script to log output + ``LOG_UPDATE 1`` + Wrap update in script to log output + ``LOG_CONFIGURE 1`` + Wrap configure in script to log output + ``LOG_BUILD 1`` + Wrap build in script to log output + ``LOG_TEST 1`` + Wrap test in script to log output + ``LOG_INSTALL 1`` + Wrap install in script to log output + + Other options are: + + ``STEP_TARGETS <step-target>...`` + Generate custom targets for these steps + ``INDEPENDENT_STEP_TARGETS <step-target>...`` + Generate custom targets for these steps that do not depend on other + external projects even if a dependency is set + + The ``*_DIR`` options specify directories for the project, with default + directories computed as follows. If the ``PREFIX`` option is given to + ``ExternalProject_Add()`` or the ``EP_PREFIX`` directory property is set, + then an external project is built and installed under the specified prefix:: + + TMP_DIR = <prefix>/tmp + STAMP_DIR = <prefix>/src/<name>-stamp + DOWNLOAD_DIR = <prefix>/src + SOURCE_DIR = <prefix>/src/<name> + BINARY_DIR = <prefix>/src/<name>-build + INSTALL_DIR = <prefix> + + Otherwise, if the ``EP_BASE`` directory property is set then components + of an external project are stored under the specified base:: + + TMP_DIR = <base>/tmp/<name> + STAMP_DIR = <base>/Stamp/<name> + DOWNLOAD_DIR = <base>/Download/<name> + SOURCE_DIR = <base>/Source/<name> + BINARY_DIR = <base>/Build/<name> + INSTALL_DIR = <base>/Install/<name> + + If no ``PREFIX``, ``EP_PREFIX``, or ``EP_BASE`` is specified then the + default is to set ``PREFIX`` to ``<name>-prefix``. Relative paths are + interpreted with respect to the build directory corresponding to the + source directory in which ``ExternalProject_Add`` is invoked. + + If ``SOURCE_DIR`` is explicitly set to an existing directory the project + will be built from it. Otherwise a download step must be specified + using one of the ``DOWNLOAD_COMMAND``, ``CVS_*``, ``SVN_*``, or ``URL`` + options. The ``URL`` option may refer locally to a directory or source + tarball, or refer to a remote tarball (e.g. ``http://.../src.tgz``). + + If ``UPDATE_DISCONNECTED`` is set, the update step is not executed + automatically when building the main target. The update step can still + be added as a step target and called manually. This is useful if you + want to allow to build the project when you are disconnected from the + network (you might still need the network for the download step). + This is disabled by default. + The directory property ``EP_UPDATE_DISCONNECTED`` can be used to change + the default value for all the external projects in the current + directory and its subdirectories. + +.. command:: ExternalProject_Add_Step + + The ``ExternalProject_Add_Step`` function adds a custom step to an + external project:: + + ExternalProject_Add_Step(<name> <step> [<option>...]) + + Options are: + + ``COMMAND <cmd>...`` + Command line invoked by this step + ``COMMENT "<text>..."`` + Text printed when step executes + ``DEPENDEES <step>...`` + Steps on which this step depends + ``DEPENDERS <step>...`` + Steps that depend on this step + ``DEPENDS <file>...`` + Files on which this step depends + ``BYPRODUCTS <file>...`` + Files that will be generated by this step but may or may not + have their modification time updated by subsequent builds. + ``ALWAYS 1`` + No stamp file, step always runs + ``EXCLUDE_FROM_MAIN 1`` + Main target does not depend on this step + ``WORKING_DIRECTORY <dir>`` + Working directory for command + ``LOG 1`` + Wrap step in script to log output + + The command line, comment, and working directory of every standard and + custom step is processed to replace tokens ``<SOURCE_DIR>``, + ``<BINARY_DIR>``, ``<INSTALL_DIR>``, and ``<TMP_DIR>`` with + corresponding property values. + +Any builtin step that specifies a ``<step>_COMMAND cmd...`` or custom +step that specifies a ``COMMAND cmd...`` may specify additional command +lines using the form ``COMMAND cmd...``. At build time the commands +will be executed in order and aborted if any one fails. For example:: + + ... BUILD_COMMAND make COMMAND echo done ... + +specifies to run ``make`` and then ``echo done`` during the build step. +Whether the current working directory is preserved between commands is +not defined. Behavior of shell operators like ``&&`` is not defined. + +.. command:: ExternalProject_Get_Property + + The ``ExternalProject_Get_Property`` function retrieves external project + target properties:: + + ExternalProject_Get_Property(<name> [prop1 [prop2 [...]]]) + + It stores property values in variables of the same name. Property + names correspond to the keyword argument names of + ``ExternalProject_Add``. + +.. command:: ExternalProject_Add_StepTargets + + The ``ExternalProject_Add_StepTargets`` function generates custom + targets for the steps listed:: + + ExternalProject_Add_StepTargets(<name> [NO_DEPENDS] [step1 [step2 [...]]]) + +If ``NO_DEPENDS`` is set, the target will not depend on the +dependencies of the complete project. This is usually safe to use for +the download, update, and patch steps that do not require that all the +dependencies are updated and built. Using ``NO_DEPENDS`` for other +of the default steps might break parallel builds, so you should avoid, +it. For custom steps, you should consider whether or not the custom +commands requires that the dependencies are configured, built and +installed. + +If ``STEP_TARGETS`` or ``INDEPENDENT_STEP_TARGETS`` is set then +``ExternalProject_Add_StepTargets`` is automatically called at the end +of matching calls to ``ExternalProject_Add_Step``. Pass +``STEP_TARGETS`` or ``INDEPENDENT_STEP_TARGETS`` explicitly to +individual ``ExternalProject_Add`` calls, or implicitly to all +``ExternalProject_Add`` calls by setting the directory properties +``EP_STEP_TARGETS`` and ``EP_INDEPENDENT_STEP_TARGETS``. The +``INDEPENDENT`` version of the argument and of the property will call +``ExternalProject_Add_StepTargets`` with the ``NO_DEPENDS`` argument. + +If ``STEP_TARGETS`` and ``INDEPENDENT_STEP_TARGETS`` are not set, +clients may still manually call ``ExternalProject_Add_StepTargets`` +after calling ``ExternalProject_Add`` or ``ExternalProject_Add_Step``. + +This functionality is provided to make it easy to drive the steps +independently of each other by specifying targets on build command +lines. For example, you may be submitting to a sub-project based +dashboard, where you want to drive the configure portion of the build, +then submit to the dashboard, followed by the build portion, followed +by tests. If you invoke a custom target that depends on a step +halfway through the step dependency chain, then all the previous steps +will also run to ensure everything is up to date. + +For example, to drive configure, build and test steps independently +for each ``ExternalProject_Add`` call in your project, write the following +line prior to any ``ExternalProject_Add`` calls in your ``CMakeLists.txt`` +file:: + + set_property(DIRECTORY PROPERTY EP_STEP_TARGETS configure build test) + +.. command:: ExternalProject_Add_StepDependencies + + The ``ExternalProject_Add_StepDependencies`` function add some + dependencies for some external project step:: + + ExternalProject_Add_StepDependencies(<name> <step> [target1 [target2 [...]]]) + + This function takes care to set both target and file level + dependencies, and will ensure that parallel builds will not break. + It should be used instead of :command:`add_dependencies()` when adding + a dependency for some of the step targets generated by + ``ExternalProject``. +#]=======================================================================] #============================================================================= # Copyright 2008-2013 Kitware, Inc. @@ -200,9 +353,9 @@ math(EXPR _ep_documentation_line_count "${CMAKE_CURRENT_LIST_LINE} - 16") file(STRINGS "${CMAKE_CURRENT_LIST_FILE}" lines LIMIT_COUNT ${_ep_documentation_line_count} - REGEX "^# ( \\[[A-Z0-9_]+ [^]]*\\] +#.*$|[A-Za-z0-9_]+\\()") + REGEX "^\\.\\. command:: [A-Za-z0-9_]+|^ ``[A-Z0-9_]+ .*``$") foreach(line IN LISTS lines) - if("${line}" MATCHES "^# ([A-Za-z0-9_]+)\\(") + if("${line}" MATCHES "^\\.\\. command:: ([A-Za-z0-9_]+)") if(_ep_func) set(_ep_keywords_${_ep_func} "${_ep_keywords_${_ep_func}})$") endif() @@ -210,8 +363,8 @@ foreach(line IN LISTS lines) #message("function [${_ep_func}]") set(_ep_keywords_${_ep_func} "^(") set(_ep_keyword_sep) - else() - string(REGEX REPLACE "^# \\[([A-Z0-9_]+) .*" "\\1" _ep_key "${line}") + elseif("${line}" MATCHES "^ ``([A-Z0-9_]+) .*``$") + set(_ep_key "${CMAKE_MATCH_1}") #message(" keyword [${_ep_key}]") set(_ep_keywords_${_ep_func} "${_ep_keywords_${_ep_func}}${_ep_keyword_sep}${_ep_key}") @@ -290,10 +443,26 @@ define_property(DIRECTORY PROPERTY "EP_STEP_TARGETS" INHERITED BRIEF_DOCS "List of ExternalProject steps that automatically get corresponding targets" FULL_DOCS + "These targets will be dependent on the main target dependencies" + "See documentation of the ExternalProject_Add_StepTargets() function in the " + "ExternalProject module." + ) + +define_property(DIRECTORY PROPERTY "EP_INDEPENDENT_STEP_TARGETS" INHERITED + BRIEF_DOCS + "List of ExternalProject steps that automatically get corresponding targets" + FULL_DOCS + "These targets will not be dependent on the main target dependencies" "See documentation of the ExternalProject_Add_StepTargets() function in the " "ExternalProject module." ) +define_property(DIRECTORY PROPERTY "EP_UPDATE_DISCONNECTED" INHERITED + BRIEF_DOCS "Never update automatically from the remote repo." + FULL_DOCS + "See documentation of the ExternalProject_Add() function in the " + "ExternalProject module." + ) function(_ep_write_gitclone_script script_filename source_dir git_EXECUTABLE git_repository git_tag git_submodules src_name work_dir gitclone_infofile gitclone_stampfile) file(WRITE ${script_filename} @@ -910,17 +1079,20 @@ macro(_ep_replace_location_tags target_name) endmacro() -function(_ep_write_initial_cache target_name script_filename args) - # Write out values into an initial cache, that will be passed to CMake with -C +function(_ep_command_line_to_initial_cache var args force) set(script_initial_cache "") set(regex "^([^:]+):([^=]+)=(.*)$") set(setArg "") + set(forceArg "") + if(force) + set(forceArg "FORCE") + endif() foreach(line ${args}) if("${line}" MATCHES "^-D(.*)") set(line "${CMAKE_MATCH_1}") if(setArg) # This is required to build up lists in variables, or complete an entry - set(setArg "${setArg}${accumulator}\" CACHE ${type} \"Initial cache\" FORCE)") + set(setArg "${setArg}${accumulator}\" CACHE ${type} \"Initial cache\" ${forceArg})") set(script_initial_cache "${script_initial_cache}\n${setArg}") set(accumulator "") set(setArg "") @@ -940,9 +1112,15 @@ function(_ep_write_initial_cache target_name script_filename args) endforeach() # Catch the final line of the args if(setArg) - set(setArg "${setArg}${accumulator}\" CACHE ${type} \"Initial cache\" FORCE)") + set(setArg "${setArg}${accumulator}\" CACHE ${type} \"Initial cache\" ${forceArg})") set(script_initial_cache "${script_initial_cache}\n${setArg}") endif() + set(${var} ${script_initial_cache} PARENT_SCOPE) +endfunction() + + +function(_ep_write_initial_cache target_name script_filename script_initial_cache) + # Write out values into an initial cache, that will be passed to CMake with -C # Replace location tags. _ep_replace_location_tags(${target_name} script_initial_cache) # Write out the initial cache file to the location specified. @@ -1180,19 +1358,28 @@ endfunction() function(ExternalProject_Add_StepTargets name) set(steps ${ARGN}) - + if("${ARGV1}" STREQUAL "NO_DEPENDS") + set(no_deps 1) + list(REMOVE_AT steps 0) + endif() foreach(step ${steps}) + if(no_deps AND "${step}" MATCHES "^(configure|build|install|test)$") + message(AUTHOR_WARNING "Using NO_DEPENDS for \"${step}\" step might break parallel builds") + endif() _ep_get_step_stampfile(${name} ${step} stamp_file) add_custom_target(${name}-${step} DEPENDS ${stamp_file}) + set_property(TARGET ${name}-${step} PROPERTY _EP_IS_EXTERNAL_PROJECT_STEP 1) set_property(TARGET ${name}-${step} PROPERTY LABELS ${name}) set_property(TARGET ${name}-${step} PROPERTY FOLDER "ExternalProjectTargets/${name}") # Depend on other external projects (target-level). - get_property(deps TARGET ${name} PROPERTY _EP_DEPENDS) - foreach(arg IN LISTS deps) - add_dependencies(${name}-${step} ${arg}) - endforeach() + if(NOT no_deps) + get_property(deps TARGET ${name} PROPERTY _EP_DEPENDS) + foreach(arg IN LISTS deps) + add_dependencies(${name}-${step} ${arg}) + endforeach() + endif() endforeach() endfunction() @@ -1228,6 +1415,9 @@ function(ExternalProject_Add_Step name step) # Dependencies on files. get_property(depends TARGET ${name} PROPERTY _EP_${step}_DEPENDS) + # Byproducts of the step. + get_property(byproducts TARGET ${name} PROPERTY _EP_${step}_BYPRODUCTS) + # Dependencies on steps. get_property(dependees TARGET ${name} PROPERTY _EP_${step}_DEPENDEES) foreach(dependee IN LISTS dependees) @@ -1274,8 +1464,18 @@ function(ExternalProject_Add_Step name step) _ep_write_log_script(${name} ${step} command) endif() + if("${command}" STREQUAL "") + # Some generators (i.e. Xcode) will not generate a file level target + # if no command is set, and therefore the dependencies on this + # target will be broken. + # The empty command is replaced by an echo command here in order to + # avoid this issue. + set(command ${CMAKE_COMMAND} -E echo_append) + endif() + add_custom_command( OUTPUT ${stamp_file} + BYPRODUCTS ${byproducts} COMMENT ${comment} COMMAND ${command} COMMAND ${touch} @@ -1283,6 +1483,7 @@ function(ExternalProject_Add_Step name step) WORKING_DIRECTORY ${work_dir} VERBATIM ) + set_property(TARGET ${name} APPEND PROPERTY _EP_STEPS ${step}) # Add custom "step target"? get_property(step_targets TARGET ${name} PROPERTY _EP_STEP_TARGETS) @@ -1295,6 +1496,60 @@ function(ExternalProject_Add_Step name step) break() endif() endforeach() + + get_property(independent_step_targets TARGET ${name} PROPERTY _EP_INDEPENDENT_STEP_TARGETS) + if(NOT independent_step_targets) + get_property(independent_step_targets DIRECTORY PROPERTY EP_INDEPENDENT_STEP_TARGETS) + endif() + foreach(st ${independent_step_targets}) + if("${st}" STREQUAL "${step}") + ExternalProject_Add_StepTargets(${name} NO_DEPENDS ${step}) + break() + endif() + endforeach() +endfunction() + + +function(ExternalProject_Add_StepDependencies name step) + set(dependencies ${ARGN}) + + # Sanity checks on "name" and "step". + if(NOT TARGET ${name}) + message(FATAL_ERROR "Cannot find target \"${name}\". Perhaps it has not yet been created using ExternalProject_Add.") + endif() + + get_property(is_ep TARGET ${name} PROPERTY _EP_IS_EXTERNAL_PROJECT) + if(NOT is_ep) + message(FATAL_ERROR "Target \"${name}\" was not generated by ExternalProject_Add.") + endif() + + get_property(steps TARGET ${name} PROPERTY _EP_STEPS) + list(FIND steps ${step} is_step) + if(NOT is_step) + message(FATAL_ERROR "External project \"${name}\" does not have a step \"${step}\".") + endif() + + if(TARGET ${name}-${step}) + get_property(is_ep_step TARGET ${name}-${step} PROPERTY _EP_IS_EXTERNAL_PROJECT_STEP) + if(NOT is_ep_step) + message(FATAL_ERROR "Target \"${name}\" was not generated by ExternalProject_Add_StepTargets.") + endif() + endif() + + # Always add file-level dependency, but add target-level dependency + # only if the target exists for that step. + _ep_get_step_stampfile(${name} ${step} stamp_file) + foreach(dep ${dependencies}) + add_custom_command(APPEND + OUTPUT ${stamp_file} + DEPENDS ${dep}) + if(TARGET ${name}-${step}) + foreach(dep ${dependencies}) + add_dependencies(${name}-${step} ${dep}) + endforeach() + endif() + endforeach() + endfunction() @@ -1612,6 +1867,12 @@ function(_ep_add_update_command name) get_property(svn_repository TARGET ${name} PROPERTY _EP_SVN_REPOSITORY) get_property(git_repository TARGET ${name} PROPERTY _EP_GIT_REPOSITORY) get_property(hg_repository TARGET ${name} PROPERTY _EP_HG_REPOSITORY ) + get_property(update_disconnected_set TARGET ${name} PROPERTY _EP_UPDATE_DISCONNECTED SET) + if(update_disconnected_set) + get_property(update_disconnected TARGET ${name} PROPERTY _EP_UPDATE_DISCONNECTED) + else() + get_property(update_disconnected DIRECTORY PROPERTY EP_UPDATE_DISCONNECTED) + endif() set(work_dir) set(comment) @@ -1701,10 +1962,26 @@ Update to Mercurial >= 2.1.1. COMMENT ${comment} COMMAND ${cmd} ALWAYS ${always} + EXCLUDE_FROM_MAIN ${update_disconnected} WORKING_DIRECTORY ${work_dir} DEPENDEES download ${log} ) + + if(always AND update_disconnected) + _ep_get_step_stampfile(${name} skip-update skip-update_stamp_file) + string(REPLACE "Performing" "Skipping" comment "${comment}") + ExternalProject_Add_Step(${name} skip-update + COMMENT ${comment} + ALWAYS 1 + EXCLUDE_FROM_MAIN 1 + WORKING_DIRECTORY ${work_dir} + DEPENDEES download + ${log} + ) + set_property(SOURCE ${skip-update_stamp_file} PROPERTY SYMBOLIC 1) + endif() + endfunction() @@ -1757,11 +2034,20 @@ function(_ep_add_configure_command name) get_property(cmake_args TARGET ${name} PROPERTY _EP_CMAKE_ARGS) list(APPEND cmd ${cmake_args}) - # If there are any CMAKE_CACHE_ARGS, write an initial cache and use it + # If there are any CMAKE_CACHE_ARGS or CMAKE_CACHE_DEFAULT_ARGS, + # write an initial cache and use it get_property(cmake_cache_args TARGET ${name} PROPERTY _EP_CMAKE_CACHE_ARGS) - if(cmake_cache_args) + get_property(cmake_cache_default_args TARGET ${name} PROPERTY _EP_CMAKE_CACHE_DEFAULT_ARGS) + + if(cmake_cache_args OR cmake_cache_default_args) set(_ep_cache_args_script "${tmp_dir}/${name}-cache.cmake") - _ep_write_initial_cache(${name} "${_ep_cache_args_script}" "${cmake_cache_args}") + if(cmake_cache_args) + _ep_command_line_to_initial_cache(script_initial_cache_force "${cmake_cache_args}" 1) + endif() + if(cmake_cache_default_args) + _ep_command_line_to_initial_cache(script_initial_cache_default "${cmake_cache_default_args}" 0) + endif() + _ep_write_initial_cache(${name} "${_ep_cache_args_script}" "${script_initial_cache_force}${script_initial_cache_default}") list(APPEND cmd "-C${_ep_cache_args_script}") endif() @@ -1817,10 +2103,22 @@ function(_ep_add_configure_command name) set(log "") endif() + get_property(update_disconnected_set TARGET ${name} PROPERTY _EP_UPDATE_DISCONNECTED SET) + if(update_disconnected_set) + get_property(update_disconnected TARGET ${name} PROPERTY _EP_UPDATE_DISCONNECTED) + else() + get_property(update_disconnected DIRECTORY PROPERTY EP_UPDATE_DISCONNECTED) + endif() + if(update_disconnected) + set(update_dep skip-update) + else() + set(update_dep update) + endif() + ExternalProject_Add_Step(${name} configure COMMAND ${cmd} WORKING_DIRECTORY ${binary_dir} - DEPENDEES update patch + DEPENDEES ${update_dep} patch DEPENDS ${file_deps} ${log} ) @@ -1851,8 +2149,11 @@ function(_ep_add_build_command name) set(always 0) endif() + get_property(build_byproducts TARGET ${name} PROPERTY _EP_BUILD_BYPRODUCTS) + ExternalProject_Add_Step(${name} build COMMAND ${cmd} + BYPRODUCTS ${build_byproducts} WORKING_DIRECTORY ${binary_dir} DEPENDEES configure ALWAYS ${always} diff --git a/Modules/FindBoost.cmake b/Modules/FindBoost.cmake index 3642b3e..aad6575 100644 --- a/Modules/FindBoost.cmake +++ b/Modules/FindBoost.cmake @@ -321,7 +321,7 @@ macro(_Boost_FIND_LIBRARY var) # If Boost_LIBRARY_DIR is known then search only there. if(Boost_LIBRARY_DIR) - set(_boost_LIBRARY_SEARCH_DIRS ${Boost_LIBRARY_DIR} NO_DEFAULT_PATH) + set(_boost_LIBRARY_SEARCH_DIRS ${Boost_LIBRARY_DIR} NO_DEFAULT_PATH NO_CMAKE_FIND_ROOT_PATH) endif() endmacro() @@ -855,7 +855,7 @@ if(_Boost_CHANGE_LIBDIR AND NOT _Boost_LIBRARY_DIR_CHANGED) endif() if(Boost_LIBRARY_DIR) - set(_boost_LIBRARY_SEARCH_DIRS ${Boost_LIBRARY_DIR} NO_DEFAULT_PATH) + set(_boost_LIBRARY_SEARCH_DIRS ${Boost_LIBRARY_DIR} NO_DEFAULT_PATH NO_CMAKE_FIND_ROOT_PATH) else() set(_boost_LIBRARY_SEARCH_DIRS "") if(BOOST_LIBRARYDIR) diff --git a/Modules/FindCurses.cmake b/Modules/FindCurses.cmake index a21ca89..f94bd09 100644 --- a/Modules/FindCurses.cmake +++ b/Modules/FindCurses.cmake @@ -179,11 +179,6 @@ if(NOT DEFINED CURSES_HAVE_CURSES_H) endif() endif() -if (NOT CURSES_TINFO_HAS_CBREAK) - find_library(CURSES_EXTRA_LIBRARY cur_colr HINTS "${_cursesLibDir}") - find_library(CURSES_EXTRA_LIBRARY cur_colr ) -endif() - find_library(CURSES_FORM_LIBRARY form HINTS "${_cursesLibDir}") find_library(CURSES_FORM_LIBRARY form ) diff --git a/Modules/FindGettext.cmake b/Modules/FindGettext.cmake index f972ad0..ac53c3f 100644 --- a/Modules/FindGettext.cmake +++ b/Modules/FindGettext.cmake @@ -50,6 +50,9 @@ # (by default use share/locale/). # If ALL is specified, the po files are processed when building the all traget. # It creates a custom target "pofiles". +# +# .. note:: +# If you wish to use the Gettext library (libintl), use :module:`FindIntl`. #============================================================================= # Copyright 2007-2009 Kitware, Inc. diff --git a/Modules/FindIntl.cmake b/Modules/FindIntl.cmake new file mode 100644 index 0000000..cd2ec63 --- /dev/null +++ b/Modules/FindIntl.cmake @@ -0,0 +1,69 @@ +#.rst: +# FindIntl +# -------- +# +# Find the Gettext libintl headers and libraries. +# +# This module reports information about the Gettext libintl +# installation in several variables. General variables:: +# +# Intl_FOUND - true if the libintl headers and libraries were found +# Intl_INCLUDE_DIRS - the directory containing the libintl headers +# Intl_LIBRARIES - libintl libraries to be linked +# +# The following cache variables may also be set:: +# +# Intl_INCLUDE_DIR - the directory containing the libintl headers +# Intl_LIBRARY - the libintl library (if any) +# +# .. note:: +# On some platforms, such as Linux with GNU libc, the gettext +# functions are present in the C standard library and libintl +# is not required. ``Intl_LIBRARIES`` will be empty in this +# case. +# +# .. note:: +# If you wish to use the Gettext tools (``msgmerge``, +# ``msgfmt``, etc.), use :module:`FindGettext`. + + +# Written by Roger Leigh <rleigh@codelibre.net> + +#============================================================================= +# Copyright 2014 Roger Leigh <rleigh@codelibre.net> +# +# Distributed under the OSI-approved BSD License (the "License"); +# see accompanying file Copyright.txt for details. +# +# This software is distributed WITHOUT ANY WARRANTY; without even the +# implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. +# See the License for more information. +#============================================================================= +# (To distribute this file outside of CMake, substitute the full +# License text for the above reference.) + +# Find include directory +find_path(Intl_INCLUDE_DIR + NAMES "libintl.h" + DOC "libintl include directory") +mark_as_advanced(Intl_INCLUDE_DIR) + +# Find all Intl libraries +find_library(Intl_LIBRARY "intl" + DOC "libintl libraries (if not in the C library)") +mark_as_advanced(Intl_LIBRARY) + +include(${CMAKE_CURRENT_LIST_DIR}/FindPackageHandleStandardArgs.cmake) +FIND_PACKAGE_HANDLE_STANDARD_ARGS(Intl + FOUND_VAR Intl_FOUND + REQUIRED_VARS Intl_INCLUDE_DIR + FAIL_MESSAGE "Failed to find Gettext libintl") + +if(Intl_FOUND) + set(Intl_INCLUDE_DIRS "${Intl_INCLUDE_DIR}") + if(Intl_LIBRARY) + set(Intl_LIBRARIES "${Intl_LIBRARY}") + else() + unset(Intl_LIBRARIES) + endif() +endif() diff --git a/Modules/FindJava.cmake b/Modules/FindJava.cmake index 79be34e..bb73853 100644 --- a/Modules/FindJava.cmake +++ b/Modules/FindJava.cmake @@ -115,7 +115,10 @@ if(Java_JAVA_EXECUTABLE) OUTPUT_STRIP_TRAILING_WHITESPACE ERROR_STRIP_TRAILING_WHITESPACE) if( res ) - if(${Java_FIND_REQUIRED}) + if(var MATCHES "No Java runtime present, requesting install") + set_property(CACHE Java_JAVA_EXECUTABLE + PROPERTY VALUE "Java_JAVA_EXECUTABLE-NOTFOUND") + elseif(${Java_FIND_REQUIRED}) message( FATAL_ERROR "Error executing java -version" ) else() message( STATUS "Warning, could not run java -version") diff --git a/Modules/FindMPI.cmake b/Modules/FindMPI.cmake index 3be5e3c..ba4ea5b 100644 --- a/Modules/FindMPI.cmake +++ b/Modules/FindMPI.cmake @@ -160,7 +160,7 @@ set(_MPI_XL_Fortran_COMPILER_NAMES mpixlf95 mpixlf95_r mpxlf95 mpxlf95 # or if we know it matches the regular compiler. foreach (lang C CXX Fortran) foreach (id GNU Intel PGI XL) - if (NOT CMAKE_${lang}_COMPILER_ID OR "${CMAKE_${lang}_COMPILER_ID}" STREQUAL "${id}") + if (NOT CMAKE_${lang}_COMPILER_ID OR CMAKE_${lang}_COMPILER_ID STREQUAL id) list(APPEND _MPI_${lang}_COMPILER_NAMES ${_MPI_${id}_${lang}_COMPILER_NAMES}) endif() unset(_MPI_${id}_${lang}_COMPILER_NAMES) # clean up the namespace here diff --git a/Modules/FindOpenMP.cmake b/Modules/FindOpenMP.cmake index 801b4f8..a102c66 100644 --- a/Modules/FindOpenMP.cmake +++ b/Modules/FindOpenMP.cmake @@ -111,11 +111,11 @@ int main() { # same in Fortran set(OpenMP_Fortran_TEST_SOURCE " -program test -use omp_lib -integer :: n -n = omp_get_num_threads() -end program test + program test + use omp_lib + integer :: n + n = omp_get_num_threads() + end program test " ) diff --git a/Modules/FindPackageHandleStandardArgs.cmake b/Modules/FindPackageHandleStandardArgs.cmake index 6bcf1e7..2de1fb3 100644 --- a/Modules/FindPackageHandleStandardArgs.cmake +++ b/Modules/FindPackageHandleStandardArgs.cmake @@ -319,7 +319,7 @@ function(FIND_PACKAGE_HANDLE_STANDARD_ARGS _NAME _FIRST_ARG) endif () unset(_VERSION_HEAD) else () - if (NOT "${${_NAME}_FIND_VERSION}" VERSION_EQUAL "${VERSION}") + if (NOT ${_NAME}_FIND_VERSION VERSION_EQUAL VERSION) set(VERSION_MSG "Found unsuitable version \"${VERSION}\", but required is exact version \"${${_NAME}_FIND_VERSION}\"") set(VERSION_OK FALSE) else () @@ -329,7 +329,7 @@ function(FIND_PACKAGE_HANDLE_STANDARD_ARGS _NAME _FIRST_ARG) unset(_VERSION_DOTS) else() # minimum version specified: - if ("${${_NAME}_FIND_VERSION}" VERSION_GREATER "${VERSION}") + if (${_NAME}_FIND_VERSION VERSION_GREATER VERSION) set(VERSION_MSG "Found unsuitable version \"${VERSION}\", but required is at least \"${${_NAME}_FIND_VERSION}\"") set(VERSION_OK FALSE) else () diff --git a/Modules/FortranCInterface/CMakeLists.txt b/Modules/FortranCInterface/CMakeLists.txt index b6232ed..721a262 100644 --- a/Modules/FortranCInterface/CMakeLists.txt +++ b/Modules/FortranCInterface/CMakeLists.txt @@ -71,7 +71,7 @@ endif() # Generate C symbol sources. set(symbol_sources) -if(NOT "${CMAKE_Fortran_COMPILER_ID}" MATCHES "^(PathScale|Cray)$") +if(NOT CMAKE_Fortran_COMPILER_ID MATCHES "^(PathScale|Cray)$") # Provide mymodule_ and my_module_ init symbols because: # - PGI Fortran uses module init symbols # but not for: diff --git a/Modules/GetPrerequisites.cmake b/Modules/GetPrerequisites.cmake index 9963517..712a41c 100644 --- a/Modules/GetPrerequisites.cmake +++ b/Modules/GetPrerequisites.cmake @@ -179,7 +179,7 @@ function(gp_append_unique list_var value) set(contains 0) foreach(item ${${list_var}}) - if("${item}" STREQUAL "${value}") + if(item STREQUAL "${value}") set(contains 1) break() endif() @@ -546,14 +546,14 @@ function(gp_resolved_file_type original_file file exepath dirs type_var) if(NOT is_system) get_filename_component(original_path "${original_lower}" PATH) get_filename_component(path "${lower}" PATH) - if("${original_path}" STREQUAL "${path}") + if(original_path STREQUAL path) set(is_local 1) else() string(LENGTH "${original_path}/" original_length) string(LENGTH "${lower}" path_length) if(${path_length} GREATER ${original_length}) string(SUBSTRING "${lower}" 0 ${original_length} path) - if("${original_path}/" STREQUAL "${path}") + if("${original_path}/" STREQUAL path) set(is_embedded 1) endif() endif() @@ -642,7 +642,7 @@ function(get_prerequisites target prerequisites_var exclude_system recurse exepa # Try to choose the right tool by default. Caller can set gp_tool prior to # calling this function to force using a different tool. # - if("${gp_tool}" STREQUAL "") + if(NOT gp_tool) set(gp_tool "ldd") if(APPLE) @@ -666,45 +666,31 @@ function(get_prerequisites target prerequisites_var exclude_system recurse exepa return() endif() - set(gp_tool_known 0) - - if("${gp_tool}" STREQUAL "ldd") + if(gp_tool STREQUAL "ldd") set(gp_cmd_args "") set(gp_regex "^[\t ]*[^\t ]+ => ([^\t\(]+) .*${eol_char}$") set(gp_regex_error "not found${eol_char}$") set(gp_regex_fallback "^[\t ]*([^\t ]+) => ([^\t ]+).*${eol_char}$") set(gp_regex_cmp_count 1) - set(gp_tool_known 1) - endif() - - if("${gp_tool}" STREQUAL "otool") + elseif(gp_tool STREQUAL "otool") set(gp_cmd_args "-L") set(gp_regex "^\t([^\t]+) \\(compatibility version ([0-9]+.[0-9]+.[0-9]+), current version ([0-9]+.[0-9]+.[0-9]+)\\)${eol_char}$") set(gp_regex_error "") set(gp_regex_fallback "") set(gp_regex_cmp_count 3) - set(gp_tool_known 1) - endif() - - if("${gp_tool}" STREQUAL "dumpbin") + elseif(gp_tool STREQUAL "dumpbin") set(gp_cmd_args "/dependents") set(gp_regex "^ ([^ ].*[Dd][Ll][Ll])${eol_char}$") set(gp_regex_error "") set(gp_regex_fallback "") set(gp_regex_cmp_count 1) - set(gp_tool_known 1) - endif() - - if("${gp_tool}" STREQUAL "objdump") + elseif(gp_tool STREQUAL "objdump") set(gp_cmd_args "-p") set(gp_regex "^\t*DLL Name: (.*\\.[Dd][Ll][Ll])${eol_char}$") set(gp_regex_error "") set(gp_regex_fallback "") set(gp_regex_cmp_count 1) - set(gp_tool_known 1) - endif() - - if(NOT gp_tool_known) + else() message(STATUS "warning: gp_tool='${gp_tool}' is an unknown tool...") message(STATUS "CMake function get_prerequisites needs more code to handle '${gp_tool}'") message(STATUS "Valid gp_tool values are dumpbin, ldd, objdump and otool.") @@ -712,7 +698,7 @@ function(get_prerequisites target prerequisites_var exclude_system recurse exepa endif() - if("${gp_tool}" STREQUAL "dumpbin") + if(gp_tool STREQUAL "dumpbin") # When running dumpbin, it also needs the "Common7/IDE" directory in the # PATH. It will already be in the PATH if being run from a Visual Studio # command prompt. Add it to the PATH here in case we are running from a @@ -727,7 +713,7 @@ function(get_prerequisites target prerequisites_var exclude_system recurse exepa set(gp_found_cmd_dlls_dir 0) file(TO_CMAKE_PATH "$ENV{PATH}" env_path) foreach(gp_env_path_element ${env_path}) - if("${gp_env_path_element}" STREQUAL "${gp_cmd_dlls_dir}") + if(gp_env_path_element STREQUAL gp_cmd_dlls_dir) set(gp_found_cmd_dlls_dir 1) endif() endforeach() @@ -741,7 +727,7 @@ function(get_prerequisites target prerequisites_var exclude_system recurse exepa # # </setup-gp_tool-vars> - if("${gp_tool}" STREQUAL "ldd") + if(gp_tool STREQUAL "ldd") set(old_ld_env "$ENV{LD_LIBRARY_PATH}") set(new_ld_env "${exepath}") foreach(dir ${dirs}) @@ -763,7 +749,7 @@ function(get_prerequisites target prerequisites_var exclude_system recurse exepa OUTPUT_VARIABLE gp_cmd_ov ) - if("${gp_tool}" STREQUAL "ldd") + if(gp_tool STREQUAL "ldd") set(ENV{LD_LIBRARY_PATH} "${old_ld_env}") endif() @@ -783,7 +769,7 @@ function(get_prerequisites target prerequisites_var exclude_system recurse exepa # check for install id and remove it from list, since otool -L can include a # reference to itself set(gp_install_id) - if("${gp_tool}" STREQUAL "otool") + if(gp_tool STREQUAL "otool") execute_process( COMMAND otool -D ${target} OUTPUT_VARIABLE gp_install_id_ov @@ -833,7 +819,7 @@ function(get_prerequisites target prerequisites_var exclude_system recurse exepa # set(add_item 1) - if("${item}" STREQUAL "${gp_install_id}") + if(item STREQUAL gp_install_id) set(add_item 0) endif() @@ -841,7 +827,7 @@ function(get_prerequisites target prerequisites_var exclude_system recurse exepa set(type "") gp_resolved_file_type("${target}" "${item}" "${exepath}" "${dirs}" type "${rpaths}") - if("${type}" STREQUAL "system") + if(type STREQUAL "system") set(add_item 0) endif() endif() diff --git a/Modules/Platform/Darwin-GNU-Fortran.cmake b/Modules/Platform/Darwin-GNU-Fortran.cmake index f4b509a..6724f9b 100644 --- a/Modules/Platform/Darwin-GNU-Fortran.cmake +++ b/Modules/Platform/Darwin-GNU-Fortran.cmake @@ -14,6 +14,8 @@ include(Platform/Darwin-GNU) __darwin_compiler_gnu(Fortran) +cmake_gnu_set_sysroot_flag(Fortran) +cmake_gnu_set_osx_deployment_target_flag(Fortran) set(CMAKE_Fortran_OSX_COMPATIBILITY_VERSION_FLAG "-compatibility_version ") set(CMAKE_Fortran_OSX_CURRENT_VERSION_FLAG "-current_version ") diff --git a/Modules/Platform/HP-UX-HP-Fortran.cmake b/Modules/Platform/HP-UX-HP-Fortran.cmake index 30acab8..e5c5d10 100644 --- a/Modules/Platform/HP-UX-HP-Fortran.cmake +++ b/Modules/Platform/HP-UX-HP-Fortran.cmake @@ -1,2 +1,5 @@ include(Platform/HP-UX-HP) __hpux_compiler_hp(Fortran) + +set(CMAKE_Fortran_CREATE_PREPROCESSED_SOURCE "<CMAKE_Fortran_COMPILER> <DEFINES> <FLAGS> -E <SOURCE> > <PREPROCESSED_SOURCE>") +set(CMAKE_Fortran_CREATE_ASSEMBLY_SOURCE "<CMAKE_Fortran_COMPILER> <DEFINES> <FLAGS> -S <SOURCE> -o <ASSEMBLY_SOURCE>") diff --git a/Modules/Platform/IRIX.cmake b/Modules/Platform/IRIX.cmake index 03e98cc..12b0f37 100644 --- a/Modules/Platform/IRIX.cmake +++ b/Modules/Platform/IRIX.cmake @@ -31,6 +31,14 @@ if(NOT CMAKE_COMPILER_IS_GNUCXX) ) endif() +if(NOT CMAKE_COMPILER_IS_GNUG77) + set (CMAKE_Fortran_CREATE_PREPROCESSED_SOURCE "<CMAKE_Fortran_COMPILER> <FLAGS> -E <SOURCE> > <PREPROCESSED_SOURCE>") + set (CMAKE_Fortran_CREATE_ASSEMBLY_SOURCE + "<CMAKE_Fortran_COMPILER> <FLAGS> -S <SOURCE>" + "mv `basename \"<SOURCE>\" | sed 's/\\.[^./]*$$//'`.s <ASSEMBLY_SOURCE>" + ) +endif() + # Initialize C link type selection flags. These flags are used when # building a shared library, shared module, or executable that links # to other libraries to select whether to use the static or shared diff --git a/Modules/Platform/Windows-Clang.cmake b/Modules/Platform/Windows-Clang.cmake index 4c936fe..da19a3d 100644 --- a/Modules/Platform/Windows-Clang.cmake +++ b/Modules/Platform/Windows-Clang.cmake @@ -18,8 +18,8 @@ if(__WINDOWS_CLANG) endif() set(__WINDOWS_CLANG 1) -if(CMAKE_C_SIMULATE_ID STREQUAL "MSVC" - OR CMAKE_CXX_SIMULATE_ID STREQUAL "MSVC") +if("x${CMAKE_C_SIMULATE_ID}" STREQUAL "xMSVC" + OR "x${CMAKE_CXX_SIMULATE_ID}" STREQUAL "xMSVC") include(Platform/Windows-MSVC) macro(__windows_compiler_clang lang) __windows_compiler_msvc(${lang}) diff --git a/Modules/Platform/eCos.cmake b/Modules/Platform/eCos.cmake index a203826..e1279ef 100644 --- a/Modules/Platform/eCos.cmake +++ b/Modules/Platform/eCos.cmake @@ -28,7 +28,7 @@ include(Platform/UnixPaths) # eCos can be built only with gcc get_property(_IN_TC GLOBAL PROPERTY IN_TRY_COMPILE) -if(CMAKE_C_COMPILER AND NOT "${CMAKE_C_COMPILER_ID}" MATCHES "GNU" AND NOT _IN_TC) +if(CMAKE_C_COMPILER AND NOT CMAKE_C_COMPILER_ID MATCHES "GNU" AND NOT _IN_TC) message(FATAL_ERROR "GNU gcc is required for eCos") endif() if(CMAKE_CXX_COMPILER AND NOT "${CMAKE_CXX_COMPILER_ID}" MATCHES "GNU" AND NOT _IN_TC) diff --git a/Modules/UseJava.cmake b/Modules/UseJava.cmake index 127012f..3a6acd8 100644 --- a/Modules/UseJava.cmake +++ b/Modules/UseJava.cmake @@ -398,7 +398,7 @@ function(add_jar _TARGET_NAME) ${CMAKE_JAVA_LIBRARY_OUTPUT_PATH} ) - if (WIN32 AND NOT CYGWIN AND CMAKE_HOST_SYSTEM_NAME MATCHES "Windows") + if (CMAKE_HOST_WIN32 AND NOT CYGWIN AND CMAKE_HOST_SYSTEM_NAME MATCHES "Windows") set(CMAKE_JAVA_INCLUDE_FLAG_SEP ";") else () set(CMAKE_JAVA_INCLUDE_FLAG_SEP ":") diff --git a/Modules/UseSWIG.cmake b/Modules/UseSWIG.cmake index 31ab48d..bab1b21 100644 --- a/Modules/UseSWIG.cmake +++ b/Modules/UseSWIG.cmake @@ -272,6 +272,8 @@ macro(SWIG_ADD_MODULE name language) if(WIN32 AND NOT CYGWIN) set_target_properties(${SWIG_MODULE_${name}_REAL_NAME} PROPERTIES SUFFIX ".pyd") endif() + elseif ("${swig_lowercase_language}" STREQUAL "r") + set_target_properties(${SWIG_MODULE_${name}_REAL_NAME} PROPERTIES PREFIX "") elseif ("${swig_lowercase_language}" STREQUAL "ruby") # In ruby you want: # require 'LIBRARY' diff --git a/Modules/WriteCompilerDetectionHeader.cmake b/Modules/WriteCompilerDetectionHeader.cmake index 86137e2..8d72d0f 100644 --- a/Modules/WriteCompilerDetectionHeader.cmake +++ b/Modules/WriteCompilerDetectionHeader.cmake @@ -72,7 +72,7 @@ # write_compiler_detection_header( # FILE climbingstats_compiler_detection.h # PREFIX ClimbingStats -# COMPILERS GNU Clang MSVC +# COMPILERS GNU Clang # FEATURES cxx_variadic_templates # ) # |