10 files changed, 139 insertions, 30 deletions
diff --git a/Modules/CMakeASM_NASMInformation.cmake b/Modules/CMakeASM_NASMInformation.cmake
new file mode 100644
index 0000000..9da7d30
--- /dev/null
+++ b/Modules/CMakeASM_NASMInformation.cmake
@@ -0,0 +1,46 @@
+
+#=============================================================================
+# Copyright 2010 Kitware, Inc.
+#
+# Distributed under the OSI-approved BSD License (the "License");
+# see accompanying file Copyright.txt for details.
+#
+# This software is distributed WITHOUT ANY WARRANTY; without even the
+# implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
+# See the License for more information.
+#=============================================================================
+# (To distribute this file outside of CMake, substitute the full
+#  License text for the above reference.)
+
+# support for the nasm assembler
+
+set(CMAKE_ASM_NASM_SOURCE_FILE_EXTENSIONS nasm asm)
+
+if(NOT CMAKE_ASM_NASM_OBJECT_FORMAT)
+  if(WIN32)
+    if(CMAKE_C_SIZEOF_DATA_PTR EQUAL 8)
+      SET(CMAKE_ASM_NASM_OBJECT_FORMAT win64)
+    else()
+      SET(CMAKE_ASM_NASM_OBJECT_FORMAT win32)
+    endif()
+  elseif(APPLE)
+    if(CMAKE_C_SIZEOF_DATA_PTR EQUAL 8)
+      SET(CMAKE_ASM_NASM_OBJECT_FORMAT macho64)
+    else()
+      SET(CMAKE_ASM_NASM_OBJECT_FORMAT macho)
+    endif()
+  else()
+    if(CMAKE_C_SIZEOF_DATA_PTR EQUAL 8)
+      SET(CMAKE_ASM_NASM_OBJECT_FORMAT elf64)
+    else()
+      SET(CMAKE_ASM_NASM_OBJECT_FORMAT elf)
+    endif()
+  endif()
+endif()
+
+set(CMAKE_ASM_NASM_COMPILE_OBJECT "<CMAKE_ASM_NASM_COMPILER> <FLAGS> -f ${CMAKE_ASM_NASM_OBJECT_FORMAT} -o <OBJECT> <SOURCE>")
+
+# Load the generic ASMInformation file:
+set(ASM_DIALECT "_NASM")
+include(CMakeASMInformation)
+set(ASM_DIALECT)
diff --git a/Modules/CMakeDetermineASMCompiler.cmake b/Modules/CMakeDetermineASMCompiler.cmake
index 06dd6b8..8353be4 100644
--- a/Modules/CMakeDetermineASMCompiler.cmake
+++ b/Modules/CMakeDetermineASMCompiler.cmake
@@ -65,6 +65,7 @@ IF(NOT CMAKE_ASM${ASM_DIALECT}_COMPILER_ID)
   SET(CMAKE_ASM${ASM_DIALECT}_COMPILER_ID_VENDOR_FLAGS_GNU "--version")
   SET(CMAKE_ASM${ASM_DIALECT}_COMPILER_ID_VENDOR_REGEX_GNU "GNU assembler")
 
+  INCLUDE(CMakeDetermineCompilerId)
   CMAKE_DETERMINE_COMPILER_ID_VENDOR(ASM${ASM_DIALECT})
 
   IF(CMAKE_ASM${ASM_DIALECT}_COMPILER_ID)
diff --git a/Modules/CMakeDetermineASM_NASMCompiler.cmake b/Modules/CMakeDetermineASM_NASMCompiler.cmake
new file mode 100644
index 0000000..d184c0a
--- /dev/null
+++ b/Modules/CMakeDetermineASM_NASMCompiler.cmake
@@ -0,0 +1,27 @@
+
+#=============================================================================
+# Copyright 2010 Kitware, Inc.
+#
+# Distributed under the OSI-approved BSD License (the "License");
+# see accompanying file Copyright.txt for details.
+#
+# This software is distributed WITHOUT ANY WARRANTY; without even the
+# implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
+# See the License for more information.
+#=============================================================================
+# (To distribute this file outside of CMake, substitute the full
+#  License text for the above reference.)
+
+# Find the nasm assembler. yasm (http://www.tortall.net/projects/yasm/) is nasm compatible
+
+SET(CMAKE_ASM_NASM_COMPILER_INIT nasm yasm)
+
+IF(NOT CMAKE_ASM_NASM_COMPILER)
+  FIND_PROGRAM(CMAKE_ASM_NASM_COMPILER nasm
+    "$ENV{ProgramFiles}/NASM")
+ENDIF(NOT CMAKE_ASM_NASM_COMPILER)
+
+# Load the generic DetermineASM compiler file with the DIALECT set properly:
+SET(ASM_DIALECT "_NASM")
+INCLUDE(CMakeDetermineASMCompiler)
+SET(ASM_DIALECT)
diff --git a/Modules/CMakePlatformId.h.in b/Modules/CMakePlatformId.h.in
index e20348a..1c63cca 100644
--- a/Modules/CMakePlatformId.h.in
+++ b/Modules/CMakePlatformId.h.in
@@ -83,7 +83,7 @@
 #endif
 
 /* For windows compilers MSVC and Intel we can determine
-   the architecture of the compiler being used.  This is becase
+   the architecture of the compiler being used.  This is because
    the compilers do not have flags that can change the architecture,
    but rather depend on which compiler is being used
 */
diff --git a/Modules/CMakeTestASM-ATTCompiler.cmake b/Modules/CMakeTestASM-ATTCompiler.cmake
index 3b7a74f..581ad0c 100644
--- a/Modules/CMakeTestASM-ATTCompiler.cmake
+++ b/Modules/CMakeTestASM-ATTCompiler.cmake
@@ -13,10 +13,10 @@
 #  License text for the above reference.)
 
 # This file is used by EnableLanguage in cmGlobalGenerator to
-# determine that that selected ASM-ATT compiler can actually compile
-# and link the most basic of programs.   If not, a fatal error
-# is set and cmake stops processing commands and will not generate
-# any makefiles or projects.
+# determine that the selected ASM-ATT "compiler" works.
+# For assembler this can only check whether the compiler has been found,
+# because otherwise there would have to be a separate assembler source file
+# for each assembler on every architecture.
 
 SET(ASM_DIALECT "-ATT")
 INCLUDE(CMakeTestASMCompiler)
diff --git a/Modules/CMakeTestASMCompiler.cmake b/Modules/CMakeTestASMCompiler.cmake
index 54def81..56cf332 100644
--- a/Modules/CMakeTestASMCompiler.cmake
+++ b/Modules/CMakeTestASMCompiler.cmake
@@ -13,10 +13,11 @@
 #  License text for the above reference.)
 
 # This file is used by EnableLanguage in cmGlobalGenerator to
-# determine that that selected ASM compiler can actually compile
-# and link the most basic of programs.   If not, a fatal error
-# is set and cmake stops processing commands and will not generate
-# any makefiles or projects.
+# determine that the selected ASM compiler works.
+# For assembler this can only check whether the compiler has been found,
+# because otherwise there would have to be a separate assembler source file
+# for each assembler on every architecture.
+
 IF(CMAKE_ASM${ASM_DIALECT}_COMPILER)
   SET(CMAKE_ASM${ASM_DIALECT}_COMPILER_WORKS 1 CACHE INTERNAL "")
 ELSE(CMAKE_ASM${ASM_DIALECT}_COMPILER)
diff --git a/Modules/CMakeTestASM_MASMCompiler.cmake b/Modules/CMakeTestASM_MASMCompiler.cmake
index 84ca98f..8369b94 100644
--- a/Modules/CMakeTestASM_MASMCompiler.cmake
+++ b/Modules/CMakeTestASM_MASMCompiler.cmake
@@ -13,10 +13,10 @@
 #  License text for the above reference.)
 
 # This file is used by EnableLanguage in cmGlobalGenerator to
-# determine that the selected ASM_MASM "compiler" (should be masm or masm64) 
-# can actually "compile" and link the most basic of programs.   If not, a 
-# fatal error is set and cmake stops processing commands and will not generate
-# any makefiles or projects.
+# determine that the selected ASM_MASM "compiler" (should be masm or masm64)
+# works. For assembler this can only check whether the compiler has been found,
+# because otherwise there would have to be a separate assembler source file
+# for each assembler on every architecture.
 
 SET(ASM_DIALECT "_MASM")
 INCLUDE(CMakeTestASMCompiler)
diff --git a/Modules/CMakeTestASM_NASMCompiler.cmake b/Modules/CMakeTestASM_NASMCompiler.cmake
new file mode 100644
index 0000000..a5e2bea
--- /dev/null
+++ b/Modules/CMakeTestASM_NASMCompiler.cmake
@@ -0,0 +1,23 @@
+
+#=============================================================================
+# Copyright 2010 Kitware, Inc.
+#
+# Distributed under the OSI-approved BSD License (the "License");
+# see accompanying file Copyright.txt for details.
+#
+# This software is distributed WITHOUT ANY WARRANTY; without even the
+# implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
+# See the License for more information.
+#=============================================================================
+# (To distribute this file outside of CMake, substitute the full
+#  License text for the above reference.)
+
+# This file is used by EnableLanguage in cmGlobalGenerator to
+# determine that the selected ASM_NASM "compiler" works.
+# For assembler this can only check whether the compiler has been found,
+# because otherwise there would have to be a separate assembler source file
+# for each assembler on every architecture.
+
+SET(ASM_DIALECT "_NASM")
+INCLUDE(CMakeTestASMCompiler)
+SET(ASM_DIALECT)
diff --git a/Modules/CPackRPM.cmake b/Modules/CPackRPM.cmake
index e2d78802..ab909f4 100644
--- a/Modules/CPackRPM.cmake
+++ b/Modules/CPackRPM.cmake
@@ -331,7 +331,7 @@ ELSE(CPACK_RPM_COMPRESSION_TYPE)
 ENDIF(CPACK_RPM_COMPRESSION_TYPE)
 
 if(CPACK_PACKAGE_RELOCATABLE)
-    set(CPACK_RPM_PACKAGE_RELOCATABLE TRUE)
+  set(CPACK_RPM_PACKAGE_RELOCATABLE TRUE)
 endif(CPACK_PACKAGE_RELOCATABLE)
 if(CPACK_RPM_PACKAGE_RELOCATABLE)
   if(CPACK_RPM_PACKAGE_DEBUG)
@@ -453,6 +453,17 @@ SET(CPACK_RPM_FILE_NAME "${CPACK_OUTPUT_FILE_NAME}")
 #STRING(REGEX REPLACE " " "\\\\ " CPACK_RPM_DIRECTORY "${CPACK_TOPLEVEL_DIRECTORY}")
 SET(CPACK_RPM_DIRECTORY "${CPACK_TOPLEVEL_DIRECTORY}")
 
+
+# Are we packaging components ?
+IF(CPACK_RPM_PACKAGE_COMPONENT)
+  SET(CPACK_RPM_PACKAGE_COMPONENT_PART_NAME "-${CPACK_RPM_PACKAGE_COMPONENT}")
+  SET(CPACK_RPM_PACKAGE_COMPONENT_PART_PATH "/${CPACK_RPM_PACKAGE_COMPONENT}")
+  SET(WDIR "${CPACK_TOPLEVEL_DIRECTORY}/${CPACK_PACKAGE_FILE_NAME}/${CPACK_RPM_PACKAGE_COMPONENT}")
+ELSE(CPACK_RPM_PACKAGE_COMPONENT)
+  SET(CPACK_RPM_PACKAGE_COMPONENT_PART_NAME "")
+  SET(CPACK_RPM_PACKAGE_COMPONENT_PART_PATH "")
+  SET(WDIR "${CPACK_TOPLEVEL_DIRECTORY}/${CPACK_PACKAGE_FILE_NAME}")
+ENDIF(CPACK_RPM_PACKAGE_COMPONENT)
 # Use files tree to construct files command (spec file)
 # We should not forget to include symlinks (thus -o -type l)
 # We must remove the './' due to the local search and escape the
@@ -460,10 +471,10 @@ SET(CPACK_RPM_DIRECTORY "${CPACK_TOPLEVEL_DIRECTORY}")
 # Then we must authorize any man pages extension (adding * at the end)
 # because rpmbuild may automatically compress those files
 EXECUTE_PROCESS(COMMAND find -type f -o -type l
-               COMMAND sed {s:.*/man.*/.*:&*:}
-               COMMAND sed {s/\\.\\\(.*\\\)/\"\\1\"/}
-               WORKING_DIRECTORY "${CPACK_TOPLEVEL_DIRECTORY}/${CPACK_PACKAGE_FILE_NAME}"
-               OUTPUT_VARIABLE CPACK_RPM_INSTALL_FILES)
+                COMMAND sed {s:.*/man.*/.*:&*:}
+                COMMAND sed {s/\\.\\\(.*\\\)/\"\\1\"/}
+                WORKING_DIRECTORY "${WDIR}"
+                OUTPUT_VARIABLE CPACK_RPM_INSTALL_FILES)
 
 if (CPACK_ABSOLUTE_DESTINATION_FILES)
   IF(CPACK_RPM_PACKAGE_DEBUG)
@@ -494,7 +505,7 @@ if (CPACK_ABSOLUTE_DESTINATION_FILES)
 endif(CPACK_ABSOLUTE_DESTINATION_FILES)
 
 # The name of the final spec file to be used by rpmbuild
-SET(CPACK_RPM_BINARY_SPECFILE "${CPACK_RPM_ROOTDIR}/SPECS/${CPACK_RPM_PACKAGE_NAME}.spec")
+SET(CPACK_RPM_BINARY_SPECFILE "${CPACK_RPM_ROOTDIR}/SPECS/${CPACK_RPM_PACKAGE_NAME}${CPACK_RPM_PACKAGE_COMPONENT_PART_NAME}.spec")
 
 # Print out some debug information if we were asked for that
 IF(CPACK_RPM_PACKAGE_DEBUG)
@@ -517,7 +528,7 @@ ENDIF(CPACK_RPM_PACKAGE_DEBUG)
 IF(CPACK_RPM_GENERATE_USER_BINARY_SPECFILE_TEMPLATE OR NOT CPACK_RPM_USER_BINARY_SPECFILE)
    FILE(WRITE ${CPACK_RPM_BINARY_SPECFILE}.in
       "# -*- rpm-spec -*-
-BuildRoot:      \@CPACK_RPM_DIRECTORY\@/\@CPACK_PACKAGE_FILE_NAME\@
+BuildRoot:      \@CPACK_RPM_DIRECTORY\@/\@CPACK_PACKAGE_FILE_NAME\@\@CPACK_RPM_PACKAGE_COMPONENT_PART_PATH\@
 Summary:        \@CPACK_RPM_PACKAGE_SUMMARY\@
 Name:           \@CPACK_RPM_PACKAGE_NAME\@
 Version:        \@CPACK_RPM_PACKAGE_VERSION\@
@@ -608,15 +619,15 @@ IF(RPMBUILD_EXECUTABLE)
   # Now call rpmbuild using the SPECFILE
   EXECUTE_PROCESS(
     COMMAND "${RPMBUILD_EXECUTABLE}" -bb
-            --buildroot "${CPACK_RPM_DIRECTORY}/${CPACK_PACKAGE_FILE_NAME}"
+            --buildroot "${CPACK_RPM_DIRECTORY}/${CPACK_PACKAGE_FILE_NAME}${CPACK_RPM_PACKAGE_COMPONENT_PART_PATH}"
             "${CPACK_RPM_BINARY_SPECFILE}"
-    WORKING_DIRECTORY "${CPACK_TOPLEVEL_DIRECTORY}/${CPACK_PACKAGE_FILE_NAME}"
-    ERROR_FILE "${CPACK_TOPLEVEL_DIRECTORY}/rpmbuild.err"
-    OUTPUT_FILE "${CPACK_TOPLEVEL_DIRECTORY}/rpmbuild.out")
+    WORKING_DIRECTORY "${CPACK_TOPLEVEL_DIRECTORY}/${CPACK_PACKAGE_FILE_NAME}${CPACK_RPM_PACKAGE_COMPONENT_PART_PATH}"
+    ERROR_FILE "${CPACK_TOPLEVEL_DIRECTORY}/rpmbuild${CPACK_RPM_PACKAGE_COMPONENT_PART_NAME}.err"
+    OUTPUT_FILE "${CPACK_TOPLEVEL_DIRECTORY}/rpmbuild${CPACK_RPM_PACKAGE_COMPONENT_PART_NAME}.out")
   IF(CPACK_RPM_PACKAGE_DEBUG)
     MESSAGE("CPackRPM:Debug: You may consult rpmbuild logs in: ")
-    MESSAGE("CPackRPM:Debug:    - ${CPACK_TOPLEVEL_DIRECTORY}/rpmbuild.err")
-    MESSAGE("CPackRPM:Debug:    - ${CPACK_TOPLEVEL_DIRECTORY}/rpmbuild.out")
+    MESSAGE("CPackRPM:Debug:    - ${CPACK_TOPLEVEL_DIRECTORY}/rpmbuild${CPACK_RPM_PACKAGE_COMPONENT_PART_NAME}.err")
+    MESSAGE("CPackRPM:Debug:    - ${CPACK_TOPLEVEL_DIRECTORY}/rpmbuild${CPACK_RPM_PACKAGE_COMPONENT_PART_NAME}.out")
   ENDIF(CPACK_RPM_PACKAGE_DEBUG)
 ELSE(RPMBUILD_EXECUTABLE)
   IF(ALIEN_EXECUTABLE)
diff --git a/Modules/Qt4Macros.cmake b/Modules/Qt4Macros.cmake
index df07d25..6a609a0 100644
--- a/Modules/Qt4Macros.cmake
+++ b/Modules/Qt4Macros.cmake
@@ -71,12 +71,12 @@ MACRO (QT4_GET_MOC_FLAGS _moc_flags)
   GET_DIRECTORY_PROPERTY(_inc_DIRS INCLUDE_DIRECTORIES)
 
   FOREACH(_current ${_inc_DIRS})
-    IF("${_current}" MATCHES ".framework/?$")
-      STRING(REGEX REPLACE "/[^/]+.framework" "" framework_path "${_current}")
+    IF("${_current}" MATCHES "\\.framework/?$")
+      STRING(REGEX REPLACE "/[^/]+\\.framework" "" framework_path "${_current}")
       SET(${_moc_flags} ${${_moc_flags}} "-F${framework_path}")
-    ELSE("${_current}" MATCHES ".framework/?$")
+    ELSE("${_current}" MATCHES "\\.framework/?$")
       SET(${_moc_flags} ${${_moc_flags}} "-I${_current}")
-    ENDIF("${_current}" MATCHES ".framework/?$")
+    ENDIF("${_current}" MATCHES "\\.framework/?$")
   ENDFOREACH(_current ${_inc_DIRS})
 
   GET_DIRECTORY_PROPERTY(_defines COMPILE_DEFINITIONS)