diff options
Diffstat (limited to 'Modules')
158 files changed, 880 insertions, 880 deletions
diff --git a/Modules/CMakeAddNewLanguage.txt b/Modules/CMakeAddNewLanguage.txt index 203c39d..6a30dd8 100644 --- a/Modules/CMakeAddNewLanguage.txt +++ b/Modules/CMakeAddNewLanguage.txt @@ -1,7 +1,7 @@ CMakeDetermine(LANG)Compiler.cmake -> this should find the compiler for LANG and configure CMake(LANG)Compiler.cmake.in CMake(LANG)Compiler.cmake.in -> used by CMakeDetermine(LANG)Compiler.cmake - This file is used to store compiler information and is copied down into try + This file is used to store compiler information and is copied down into try compile directories so that try compiles do not need to re-determine and test the LANG CMakeTest(LANG)Compiler.cmake -> test the compiler and set: diff --git a/Modules/CMakeBackwardCompatibilityC.cmake b/Modules/CMakeBackwardCompatibilityC.cmake index 00e5688..60dcb6c 100644 --- a/Modules/CMakeBackwardCompatibilityC.cmake +++ b/Modules/CMakeBackwardCompatibilityC.cmake @@ -67,7 +67,7 @@ IF(NOT CMAKE_SKIP_COMPATIBILITY_TESTS) INCLUDE (FindThreads) - SET (CMAKE_THREAD_LIBS "${CMAKE_THREAD_LIBS_INIT}" CACHE STRING + SET (CMAKE_THREAD_LIBS "${CMAKE_THREAD_LIBS_INIT}" CACHE STRING "Thread library used.") SET (CMAKE_USE_PTHREADS "${CMAKE_USE_PTHREADS_INIT}" CACHE BOOL @@ -79,7 +79,7 @@ IF(NOT CMAKE_SKIP_COMPATIBILITY_TESTS) SET (CMAKE_HP_PTHREADS ${CMAKE_HP_PTHREADS_INIT} CACHE BOOL "Use HP pthreads.") - SET (CMAKE_USE_SPROC ${CMAKE_USE_SPROC_INIT} CACHE BOOL + SET (CMAKE_USE_SPROC ${CMAKE_USE_SPROC_INIT} CACHE BOOL "Use sproc libs.") IF(__ERASE_CMAKE_TRY_COMPILE_OSX_ARCHITECTURES) diff --git a/Modules/CMakeBackwardCompatibilityCXX.cmake b/Modules/CMakeBackwardCompatibilityCXX.cmake index 707bbde..839c21d 100644 --- a/Modules/CMakeBackwardCompatibilityCXX.cmake +++ b/Modules/CMakeBackwardCompatibilityCXX.cmake @@ -1,5 +1,5 @@ # - define a bunch of backwards compatibility variables -# CMAKE_ANSI_CXXFLAGS - flag for ansi c++ +# CMAKE_ANSI_CXXFLAGS - flag for ansi c++ # CMAKE_HAS_ANSI_STRING_STREAM - has <strstream> # INCLUDE(TestForANSIStreamHeaders) # INCLUDE(CheckIncludeFileCXX) @@ -37,7 +37,7 @@ IF(NOT CMAKE_SKIP_COMPATIBILITY_TESTS) # if the compiler liked the flag then set CMAKE_ANSI_CXXFLAGS # to the flag IF(CMAKE_CXX_ACCEPTS_FLAGS) - SET(CMAKE_ANSI_CXXFLAGS ${CMAKE_TRY_ANSI_CXX_FLAGS} CACHE INTERNAL + SET(CMAKE_ANSI_CXXFLAGS ${CMAKE_TRY_ANSI_CXX_FLAGS} CACHE INTERNAL "What flags are required by the c++ compiler to make it ansi." ) ENDIF(CMAKE_CXX_ACCEPTS_FLAGS) ENDIF( CMAKE_TRY_ANSI_CXX_FLAGS MATCHES ".+") diff --git a/Modules/CMakeCInformation.cmake b/Modules/CMakeCInformation.cmake index afac7a4..fab5807 100644 --- a/Modules/CMakeCInformation.cmake +++ b/Modules/CMakeCInformation.cmake @@ -57,7 +57,7 @@ IF(CMAKE_C_COMPILER_ID) OPTIONAL RESULT_VARIABLE _INCLUDED_FILE) ENDIF(CMAKE_C_COMPILER_ID) IF (NOT _INCLUDED_FILE) - INCLUDE(Platform/${CMAKE_SYSTEM_NAME}-${CMAKE_BASE_NAME} + INCLUDE(Platform/${CMAKE_SYSTEM_NAME}-${CMAKE_BASE_NAME} OPTIONAL RESULT_VARIABLE _INCLUDED_FILE) ENDIF (NOT _INCLUDED_FILE) # We specify the compiler information in the system file for some @@ -76,7 +76,7 @@ IF(CMAKE_C_SIZEOF_DATA_PTR) ENDIF() # This should be included before the _INIT variables are -# used to initialize the cache. Since the rule variables +# used to initialize the cache. Since the rule variables # have if blocks on them, users can still define them here. # But, it should still be after the platform file so changes can # be made to those values. @@ -103,7 +103,7 @@ IF(NOT CMAKE_MODULE_EXISTS) ENDIF(NOT CMAKE_MODULE_EXISTS) SET(CMAKE_C_FLAGS_INIT "$ENV{CFLAGS} ${CMAKE_C_FLAGS_INIT}") -# avoid just having a space as the initial value for the cache +# avoid just having a space as the initial value for the cache IF(CMAKE_C_FLAGS_INIT STREQUAL " ") SET(CMAKE_C_FLAGS_INIT) ENDIF(CMAKE_C_FLAGS_INIT STREQUAL " ") @@ -113,7 +113,7 @@ SET (CMAKE_C_FLAGS "${CMAKE_C_FLAGS_INIT}" CACHE STRING IF(NOT CMAKE_NOT_USING_CONFIG_FLAGS) # default build type is none IF(NOT CMAKE_NO_BUILD_TYPE) - SET (CMAKE_BUILD_TYPE ${CMAKE_BUILD_TYPE_INIT} CACHE STRING + SET (CMAKE_BUILD_TYPE ${CMAKE_BUILD_TYPE_INIT} CACHE STRING "Choose the type of build, options are: None(CMAKE_CXX_FLAGS or CMAKE_C_FLAGS used) Debug Release RelWithDebInfo MinSizeRel.") ENDIF(NOT CMAKE_NO_BUILD_TYPE) SET (CMAKE_C_FLAGS_DEBUG "${CMAKE_C_FLAGS_DEBUG_INIT}" CACHE STRING @@ -151,13 +151,13 @@ INCLUDE(CMakeCommonLanguageInclude) # <LINK_FLAGS> # C compiler information -# <CMAKE_C_COMPILER> +# <CMAKE_C_COMPILER> # <CMAKE_SHARED_LIBRARY_CREATE_C_FLAGS> # <CMAKE_SHARED_MODULE_CREATE_C_FLAGS> # <CMAKE_C_LINK_FLAGS> # Static library tools -# <CMAKE_AR> +# <CMAKE_AR> # <CMAKE_RANLIB> diff --git a/Modules/CMakeCXXInformation.cmake b/Modules/CMakeCXXInformation.cmake index 9dc9cbd..7d38c64 100644 --- a/Modules/CMakeCXXInformation.cmake +++ b/Modules/CMakeCXXInformation.cmake @@ -75,7 +75,7 @@ IF(CMAKE_CXX_SIZEOF_DATA_PTR) ENDIF() # This should be included before the _INIT variables are -# used to initialize the cache. Since the rule variables +# used to initialize the cache. Since the rule variables # have if blocks on them, users can still define them here. # But, it should still be after the platform file so changes can # be made to those values. @@ -121,7 +121,7 @@ IF(NOT DEFINED CMAKE_SHARED_LIBRARY_LINK_CXX_FLAGS) ENDIF(NOT DEFINED CMAKE_SHARED_LIBRARY_LINK_CXX_FLAGS) IF(NOT CMAKE_SHARED_LIBRARY_RUNTIME_CXX_FLAG) - SET(CMAKE_SHARED_LIBRARY_RUNTIME_CXX_FLAG ${CMAKE_SHARED_LIBRARY_RUNTIME_C_FLAG}) + SET(CMAKE_SHARED_LIBRARY_RUNTIME_CXX_FLAG ${CMAKE_SHARED_LIBRARY_RUNTIME_C_FLAG}) ENDIF(NOT CMAKE_SHARED_LIBRARY_RUNTIME_CXX_FLAG) IF(NOT CMAKE_SHARED_LIBRARY_RUNTIME_CXX_FLAG_SEP) @@ -198,7 +198,7 @@ ENDFOREACH(type) # use _INIT variables so that this only happens the first time # and you can set these flags in the cmake cache SET(CMAKE_CXX_FLAGS_INIT "$ENV{CXXFLAGS} ${CMAKE_CXX_FLAGS_INIT}") -# avoid just having a space as the initial value for the cache +# avoid just having a space as the initial value for the cache IF(CMAKE_CXX_FLAGS_INIT STREQUAL " ") SET(CMAKE_CXX_FLAGS_INIT) ENDIF(CMAKE_CXX_FLAGS_INIT STREQUAL " ") @@ -241,13 +241,13 @@ INCLUDE(CMakeCommonLanguageInclude) # <LINK_FLAGS> # CXX compiler information -# <CMAKE_CXX_COMPILER> +# <CMAKE_CXX_COMPILER> # <CMAKE_SHARED_LIBRARY_CREATE_CXX_FLAGS> # <CMAKE_CXX_SHARED_MODULE_CREATE_FLAGS> # <CMAKE_CXX_LINK_FLAGS> # Static library tools -# <CMAKE_AR> +# <CMAKE_AR> # <CMAKE_RANLIB> @@ -288,7 +288,7 @@ ENDIF(NOT CMAKE_CXX_LINK_EXECUTABLE) MARK_AS_ADVANCED( CMAKE_BUILD_TOOL -CMAKE_VERBOSE_MAKEFILE +CMAKE_VERBOSE_MAKEFILE CMAKE_CXX_FLAGS CMAKE_CXX_FLAGS_RELEASE CMAKE_CXX_FLAGS_RELWITHDEBINFO diff --git a/Modules/CMakeCommonLanguageInclude.cmake b/Modules/CMakeCommonLanguageInclude.cmake index a2929f1..aa129de 100644 --- a/Modules/CMakeCommonLanguageInclude.cmake +++ b/Modules/CMakeCommonLanguageInclude.cmake @@ -23,10 +23,10 @@ SET (CMAKE_EXE_LINKER_FLAGS "${CMAKE_EXE_LINKER_FLAGS_INIT} $ENV{LDFLAGS}" IF(NOT CMAKE_NOT_USING_CONFIG_FLAGS) # default build type is none IF(NOT CMAKE_NO_BUILD_TYPE) - SET (CMAKE_BUILD_TYPE ${CMAKE_BUILD_TYPE_INIT} CACHE STRING + SET (CMAKE_BUILD_TYPE ${CMAKE_BUILD_TYPE_INIT} CACHE STRING "Choose the type of build, options are: None(CMAKE_CXX_FLAGS or CMAKE_C_FLAGS used) Debug Release RelWithDebInfo MinSizeRel.") ENDIF(NOT CMAKE_NO_BUILD_TYPE) - + SET (CMAKE_EXE_LINKER_FLAGS_DEBUG ${CMAKE_EXE_LINKER_FLAGS_DEBUG_INIT} CACHE STRING "Flags used by the linker during debug builds.") @@ -36,10 +36,10 @@ IF(NOT CMAKE_NOT_USING_CONFIG_FLAGS) SET (CMAKE_EXE_LINKER_FLAGS_RELEASE ${CMAKE_EXE_LINKER_FLAGS_RELEASE_INIT} CACHE STRING "Flags used by the linker during release builds.") - SET (CMAKE_EXE_LINKER_FLAGS_RELWITHDEBINFO + SET (CMAKE_EXE_LINKER_FLAGS_RELWITHDEBINFO ${CMAKE_EXE_LINKER_FLAGS_RELWITHDEBINFO_INIT} CACHE STRING "Flags used by the linker during Release with Debug Info builds.") - + SET (CMAKE_SHARED_LINKER_FLAGS_DEBUG ${CMAKE_SHARED_LINKER_FLAGS_DEBUG_INIT} CACHE STRING "Flags used by the linker during debug builds.") @@ -50,7 +50,7 @@ IF(NOT CMAKE_NOT_USING_CONFIG_FLAGS) SET (CMAKE_SHARED_LINKER_FLAGS_RELEASE ${CMAKE_SHARED_LINKER_FLAGS_RELEASE_INIT} CACHE STRING "Flags used by the linker during release builds.") - SET (CMAKE_SHARED_LINKER_FLAGS_RELWITHDEBINFO + SET (CMAKE_SHARED_LINKER_FLAGS_RELWITHDEBINFO ${CMAKE_SHARED_LINKER_FLAGS_RELWITHDEBINFO_INIT} CACHE STRING "Flags used by the linker during Release with Debug Info builds.") @@ -64,7 +64,7 @@ IF(NOT CMAKE_NOT_USING_CONFIG_FLAGS) SET (CMAKE_MODULE_LINKER_FLAGS_RELEASE ${CMAKE_MODULE_LINKER_FLAGS_RELEASE_INIT} CACHE STRING "Flags used by the linker during release builds.") - SET (CMAKE_MODULE_LINKER_FLAGS_RELWITHDEBINFO + SET (CMAKE_MODULE_LINKER_FLAGS_RELWITHDEBINFO ${CMAKE_MODULE_LINKER_FLAGS_RELWITHDEBINFO_INIT} CACHE STRING "Flags used by the linker during Release with Debug Info builds.") @@ -77,13 +77,13 @@ SET (CMAKE_SHARED_LINKER_FLAGS "${CMAKE_SHARED_LINKER_FLAGS_INIT} $ENV{LDFLAGS}" SET (CMAKE_MODULE_LINKER_FLAGS "${CMAKE_MODULE_LINKER_FLAGS_INIT} $ENV{LDFLAGS}" CACHE STRING "Flags used by the linker during the creation of modules.") -SET(CMAKE_BUILD_TOOL ${CMAKE_MAKE_PROGRAM} CACHE INTERNAL +SET(CMAKE_BUILD_TOOL ${CMAKE_MAKE_PROGRAM} CACHE INTERNAL "What is the target build tool cmake is generating for.") MARK_AS_ADVANCED( CMAKE_BUILD_TOOL -CMAKE_VERBOSE_MAKEFILE +CMAKE_VERBOSE_MAKEFILE CMAKE_EXE_LINKER_FLAGS CMAKE_EXE_LINKER_FLAGS_DEBUG diff --git a/Modules/CMakeDetermineFortranCompiler.cmake b/Modules/CMakeDetermineFortranCompiler.cmake index 45033c2..766289e 100644 --- a/Modules/CMakeDetermineFortranCompiler.cmake +++ b/Modules/CMakeDetermineFortranCompiler.cmake @@ -15,7 +15,7 @@ # determine the compiler to use for Fortran programs # NOTE, a generator may set CMAKE_Fortran_COMPILER before # loading this file to force a compiler. -# use environment variable FC first if defined by user, next use +# use environment variable FC first if defined by user, next use # the cmake variable CMAKE_GENERATOR_FC which can be defined by a generator # as a default compiler @@ -34,12 +34,12 @@ IF(NOT CMAKE_Fortran_COMPILER) ENDIF(CMAKE_Fortran_FLAGS_ENV_INIT) IF(EXISTS ${CMAKE_Fortran_COMPILER_INIT}) ELSE(EXISTS ${CMAKE_Fortran_COMPILER_INIT}) - MESSAGE(FATAL_ERROR "Could not find compiler set in environment variable FC:\n$ENV{FC}.") + MESSAGE(FATAL_ERROR "Could not find compiler set in environment variable FC:\n$ENV{FC}.") ENDIF(EXISTS ${CMAKE_Fortran_COMPILER_INIT}) ENDIF($ENV{FC} MATCHES ".+") - + # next try prefer the compiler specified by the generator - IF(CMAKE_GENERATOR_FC) + IF(CMAKE_GENERATOR_FC) IF(NOT CMAKE_Fortran_COMPILER_INIT) SET(CMAKE_Fortran_COMPILER_INIT ${CMAKE_GENERATOR_FC}) ENDIF(NOT CMAKE_Fortran_COMPILER_INIT) @@ -64,7 +64,7 @@ IF(NOT CMAKE_Fortran_COMPILER) # ifc: Intel Fortran 95 compiler for Linux/x86 # efc: Intel Fortran 95 compiler for IA64 # - # The order is 95 or newer compilers first, then 90, + # The order is 95 or newer compilers first, then 90, # then 77 or older compilers, gnu is always last in the group, # so if you paid for a compiler it is picked by default. SET(CMAKE_Fortran_COMPILER_LIST @@ -88,7 +88,7 @@ IF(NOT CMAKE_Fortran_COMPILER) ELSE(NOT CMAKE_Fortran_COMPILER) # we only get here if CMAKE_Fortran_COMPILER was specified using -D or a pre-made CMakeCache.txt # (e.g. via ctest) or set in CMAKE_TOOLCHAIN_FILE - # if CMAKE_Fortran_COMPILER is a list of length 2, use the first item as + # if CMAKE_Fortran_COMPILER is a list of length 2, use the first item as # CMAKE_Fortran_COMPILER and the 2nd one as CMAKE_Fortran_COMPILER_ARG1 LIST(LENGTH CMAKE_Fortran_COMPILER _CMAKE_Fortran_COMPILER_LIST_LENGTH) @@ -97,9 +97,9 @@ ELSE(NOT CMAKE_Fortran_COMPILER) LIST(GET CMAKE_Fortran_COMPILER 0 CMAKE_Fortran_COMPILER) ENDIF("${_CMAKE_Fortran_COMPILER_LIST_LENGTH}" EQUAL 2) - # if a compiler was specified by the user but without path, + # if a compiler was specified by the user but without path, # now try to find it with the full path - # if it is found, force it into the cache, + # if it is found, force it into the cache, # if not, don't overwrite the setting (which was given by the user) with "NOTFOUND" # if the C compiler already had a path, reuse it for searching the CXX compiler GET_FILENAME_COMPONENT(_CMAKE_USER_Fortran_COMPILER_PATH "${CMAKE_Fortran_COMPILER}" PATH) @@ -113,7 +113,7 @@ ELSE(NOT CMAKE_Fortran_COMPILER) ENDIF(NOT _CMAKE_USER_Fortran_COMPILER_PATH) ENDIF(NOT CMAKE_Fortran_COMPILER) -MARK_AS_ADVANCED(CMAKE_Fortran_COMPILER) +MARK_AS_ADVANCED(CMAKE_Fortran_COMPILER) # Build a small source file to identify the compiler. IF(${CMAKE_GENERATOR} MATCHES "Visual Studio") diff --git a/Modules/CMakeDetermineJavaCompiler.cmake b/Modules/CMakeDetermineJavaCompiler.cmake index aefcaba..e899a1e 100644 --- a/Modules/CMakeDetermineJavaCompiler.cmake +++ b/Modules/CMakeDetermineJavaCompiler.cmake @@ -24,21 +24,21 @@ IF(NOT CMAKE_Java_COMPILER) SET(CMAKE_Java_COMPILER_ARG1 "${CMAKE_Java_FLAGS_ENV_INIT}" CACHE STRING "First argument to Java compiler") ENDIF(CMAKE_Java_FLAGS_ENV_INIT) IF(NOT EXISTS ${CMAKE_Java_COMPILER_INIT}) - MESSAGE(SEND_ERROR "Could not find compiler set in environment variable JAVA_COMPILER:\n$ENV{JAVA_COMPILER}.") + MESSAGE(SEND_ERROR "Could not find compiler set in environment variable JAVA_COMPILER:\n$ENV{JAVA_COMPILER}.") ENDIF(NOT EXISTS ${CMAKE_Java_COMPILER_INIT}) ENDIF($ENV{JAVA_COMPILER} MATCHES ".+") IF($ENV{JAVA_RUNTIME} MATCHES ".+") GET_FILENAME_COMPONENT(CMAKE_Java_RUNTIME_INIT $ENV{JAVA_RUNTIME} PROGRAM PROGRAM_ARGS CMAKE_Java_FLAGS_ENV_INIT) IF(NOT EXISTS ${CMAKE_Java_RUNTIME_INIT}) - MESSAGE(SEND_ERROR "Could not find compiler set in environment variable JAVA_RUNTIME:\n$ENV{JAVA_RUNTIME}.") + MESSAGE(SEND_ERROR "Could not find compiler set in environment variable JAVA_RUNTIME:\n$ENV{JAVA_RUNTIME}.") ENDIF(NOT EXISTS ${CMAKE_Java_RUNTIME_INIT}) ENDIF($ENV{JAVA_RUNTIME} MATCHES ".+") IF($ENV{JAVA_ARCHIVE} MATCHES ".+") GET_FILENAME_COMPONENT(CMAKE_Java_ARCHIVE_INIT $ENV{JAVA_ARCHIVE} PROGRAM PROGRAM_ARGS CMAKE_Java_FLAGS_ENV_INIT) IF(NOT EXISTS ${CMAKE_Java_ARCHIVE_INIT}) - MESSAGE(SEND_ERROR "Could not find compiler set in environment variable JAVA_ARCHIVE:\n$ENV{JAVA_ARCHIVE}.") + MESSAGE(SEND_ERROR "Could not find compiler set in environment variable JAVA_ARCHIVE:\n$ENV{JAVA_ARCHIVE}.") ENDIF(NOT EXISTS ${CMAKE_Java_ARCHIVE_INIT}) ENDIF($ENV{JAVA_ARCHIVE} MATCHES ".+") @@ -71,7 +71,7 @@ IF(NOT CMAKE_Java_COMPILER) FIND_PROGRAM(CMAKE_Java_COMPILER NAMES javac PATHS ${Java_BIN_PATH} - ) + ) ENDIF(CMAKE_Java_COMPILER_INIT) # if no runtime has been specified yet, then look for one @@ -81,7 +81,7 @@ IF(NOT CMAKE_Java_COMPILER) FIND_PROGRAM(CMAKE_Java_RUNTIME NAMES java PATHS ${Java_BIN_PATH} - ) + ) ENDIF(CMAKE_Java_RUNTIME_INIT) # if no archive has been specified yet, then look for one @@ -91,12 +91,12 @@ IF(NOT CMAKE_Java_COMPILER) FIND_PROGRAM(CMAKE_Java_ARCHIVE NAMES jar PATHS ${Java_BIN_PATH} - ) + ) ENDIF(CMAKE_Java_ARCHIVE_INIT) ENDIF(NOT CMAKE_Java_COMPILER) -MARK_AS_ADVANCED(CMAKE_Java_COMPILER) +MARK_AS_ADVANCED(CMAKE_Java_COMPILER) # configure variables set in this file for fast reload later on -CONFIGURE_FILE(${CMAKE_ROOT}/Modules/CMakeJavaCompiler.cmake.in +CONFIGURE_FILE(${CMAKE_ROOT}/Modules/CMakeJavaCompiler.cmake.in ${CMAKE_BINARY_DIR}${CMAKE_FILES_DIRECTORY}/CMakeJavaCompiler.cmake IMMEDIATE @ONLY) SET(CMAKE_Java_COMPILER_ENV_VAR "JAVA_COMPILER") diff --git a/Modules/CMakeDetermineRCCompiler.cmake b/Modules/CMakeDetermineRCCompiler.cmake index 8e085af..4662e3a 100644 --- a/Modules/CMakeDetermineRCCompiler.cmake +++ b/Modules/CMakeDetermineRCCompiler.cmake @@ -15,7 +15,7 @@ # determine the compiler to use for C programs # NOTE, a generator may set CMAKE_C_COMPILER before # loading this file to force a compiler. -# use environment variable CCC first if defined by user, next use +# use environment variable CCC first if defined by user, next use # the cmake variable CMAKE_GENERATOR_CC which can be defined by a generator # as a default compiler IF(NOT CMAKE_RC_COMPILER) @@ -27,12 +27,12 @@ IF(NOT CMAKE_RC_COMPILER) ENDIF(CMAKE_RC_FLAGS_ENV_INIT) IF(EXISTS ${CMAKE_RC_COMPILER_INIT}) ELSE(EXISTS ${CMAKE_RC_COMPILER_INIT}) - MESSAGE(FATAL_ERROR "Could not find compiler set in environment variable RC:\n$ENV{RC}.") + MESSAGE(FATAL_ERROR "Could not find compiler set in environment variable RC:\n$ENV{RC}.") ENDIF(EXISTS ${CMAKE_RC_COMPILER_INIT}) ENDIF($ENV{RC} MATCHES ".+") - + # next try prefer the compiler specified by the generator - IF(CMAKE_GENERATOR_RC) + IF(CMAKE_GENERATOR_RC) IF(NOT CMAKE_RC_COMPILER_INIT) SET(CMAKE_RC_COMPILER_INIT ${CMAKE_GENERATOR_RC}) ENDIF(NOT CMAKE_RC_COMPILER_INIT) @@ -52,7 +52,7 @@ IF(NOT CMAKE_RC_COMPILER) ENDIF(CMAKE_RC_COMPILER_INIT AND NOT CMAKE_RC_COMPILER) ENDIF(NOT CMAKE_RC_COMPILER) -MARK_AS_ADVANCED(CMAKE_RC_COMPILER) +MARK_AS_ADVANCED(CMAKE_RC_COMPILER) GET_FILENAME_COMPONENT(_CMAKE_RC_COMPILER_NAME_WE ${CMAKE_RC_COMPILER} NAME_WE) IF(_CMAKE_RC_COMPILER_NAME_WE STREQUAL "windres") @@ -62,6 +62,6 @@ ELSE() ENDIF() # configure variables set in this file for fast reload later on -CONFIGURE_FILE(${CMAKE_ROOT}/Modules/CMakeRCCompiler.cmake.in +CONFIGURE_FILE(${CMAKE_ROOT}/Modules/CMakeRCCompiler.cmake.in ${CMAKE_BINARY_DIR}${CMAKE_FILES_DIRECTORY}/CMakeRCCompiler.cmake IMMEDIATE) SET(CMAKE_RC_COMPILER_ENV_VAR "RC") diff --git a/Modules/CMakeDetermineSystem.cmake b/Modules/CMakeDetermineSystem.cmake index 7ae3775..c89ccd1 100644 --- a/Modules/CMakeDetermineSystem.cmake +++ b/Modules/CMakeDetermineSystem.cmake @@ -19,24 +19,24 @@ # # Expected uname -s output: # -# AIX AIX -# BSD/OS BSD/OS -# FreeBSD FreeBSD -# HP-UX HP-UX -# IRIX IRIX -# Linux Linux +# AIX AIX +# BSD/OS BSD/OS +# FreeBSD FreeBSD +# HP-UX HP-UX +# IRIX IRIX +# Linux Linux # GNU/kFreeBSD GNU/kFreeBSD -# NetBSD NetBSD -# OpenBSD OpenBSD -# OFS/1 (Digital Unix) OSF1 -# SCO OpenServer 5 SCO_SV -# SCO UnixWare 7 UnixWare -# SCO UnixWare (pre release 7) UNIX_SV -# SCO XENIX Xenix -# Solaris SunOS -# SunOS SunOS -# Tru64 Tru64 -# Ultrix ULTRIX +# NetBSD NetBSD +# OpenBSD OpenBSD +# OFS/1 (Digital Unix) OSF1 +# SCO OpenServer 5 SCO_SV +# SCO UnixWare 7 UnixWare +# SCO UnixWare (pre release 7) UNIX_SV +# SCO XENIX Xenix +# Solaris SunOS +# SunOS SunOS +# Tru64 Tru64 +# Ultrix ULTRIX # cygwin CYGWIN_NT-5.1 # MacOSX Darwin @@ -61,7 +61,7 @@ IF(CMAKE_HOST_UNIX) RETURN_VALUE val) ENDIF("${val}" GREATER 0) ENDIF() - # check the return of the last uname -m or -p + # check the return of the last uname -m or -p IF("${val}" GREATER 0) SET(CMAKE_HOST_SYSTEM_PROCESSOR "unknown") ENDIF("${val}" GREATER 0) @@ -79,7 +79,7 @@ ENDIF(CMAKE_HOST_UNIX) # if a toolchain file is used, the user wants to cross compile. # in this case read the toolchain file and keep the CMAKE_HOST_SYSTEM_* -# variables around so they can be used in CMakeLists.txt. +# variables around so they can be used in CMakeLists.txt. # In all other cases, the host and target platform are the same. IF(CMAKE_TOOLCHAIN_FILE) # at first try to load it as path relative to the directory from which cmake has been run @@ -92,7 +92,7 @@ IF(CMAKE_TOOLCHAIN_FILE) IF(_INCLUDED_TOOLCHAIN_FILE) SET(CMAKE_TOOLCHAIN_FILE "${_INCLUDED_TOOLCHAIN_FILE}" CACHE FILEPATH "The CMake toolchain file" FORCE) ELSE(_INCLUDED_TOOLCHAIN_FILE) - MESSAGE(FATAL_ERROR "Could not find toolchain file: ${CMAKE_TOOLCHAIN_FILE}") + MESSAGE(FATAL_ERROR "Could not find toolchain file: ${CMAKE_TOOLCHAIN_FILE}") SET(CMAKE_TOOLCHAIN_FILE "NOTFOUND" CACHE FILEPATH "The CMake toolchain file" FORCE) ENDIF(_INCLUDED_TOOLCHAIN_FILE) ENDIF(CMAKE_TOOLCHAIN_FILE) @@ -130,7 +130,7 @@ MACRO(ADJUST_CMAKE_SYSTEM_VARIABLES _PREFIX) SET(${_PREFIX}_NAME kFreeBSD) ENDIF(${_PREFIX}_NAME MATCHES kFreeBSD) - # fix for CYGWIN which has windows version in it + # fix for CYGWIN which has windows version in it IF(${_PREFIX}_NAME MATCHES CYGWIN) SET(${_PREFIX}_NAME CYGWIN) ENDIF(${_PREFIX}_NAME MATCHES CYGWIN) @@ -147,17 +147,17 @@ ENDMACRO(ADJUST_CMAKE_SYSTEM_VARIABLES _PREFIX) ADJUST_CMAKE_SYSTEM_VARIABLES(CMAKE_SYSTEM) ADJUST_CMAKE_SYSTEM_VARIABLES(CMAKE_HOST_SYSTEM) -# this file is also executed from cpack, then we don't need to generate these files +# this file is also executed from cpack, then we don't need to generate these files # in this case there is no CMAKE_BINARY_DIR IF(CMAKE_BINARY_DIR) # write entry to the log file IF(PRESET_CMAKE_SYSTEM_NAME) - FILE(APPEND ${CMAKE_BINARY_DIR}${CMAKE_FILES_DIRECTORY}/CMakeOutput.log + FILE(APPEND ${CMAKE_BINARY_DIR}${CMAKE_FILES_DIRECTORY}/CMakeOutput.log "The target system is: ${CMAKE_SYSTEM_NAME} - ${CMAKE_SYSTEM_VERSION} - ${CMAKE_SYSTEM_PROCESSOR}\n") - FILE(APPEND ${CMAKE_BINARY_DIR}${CMAKE_FILES_DIRECTORY}/CMakeOutput.log + FILE(APPEND ${CMAKE_BINARY_DIR}${CMAKE_FILES_DIRECTORY}/CMakeOutput.log "The host system is: ${CMAKE_HOST_SYSTEM_NAME} - ${CMAKE_HOST_SYSTEM_VERSION} - ${CMAKE_HOST_SYSTEM_PROCESSOR}\n") ELSE(PRESET_CMAKE_SYSTEM_NAME) - FILE(APPEND ${CMAKE_BINARY_DIR}${CMAKE_FILES_DIRECTORY}/CMakeOutput.log + FILE(APPEND ${CMAKE_BINARY_DIR}${CMAKE_FILES_DIRECTORY}/CMakeOutput.log "The system is: ${CMAKE_SYSTEM_NAME} - ${CMAKE_SYSTEM_VERSION} - ${CMAKE_SYSTEM_PROCESSOR}\n") ENDIF(PRESET_CMAKE_SYSTEM_NAME) @@ -170,7 +170,7 @@ IF(CMAKE_BINARY_DIR) # configure variables set in this file for fast reload, the template file is defined at the top of this file CONFIGURE_FILE(${CMAKE_ROOT}/Modules/CMakeSystem.cmake.in - ${CMAKE_BINARY_DIR}${CMAKE_FILES_DIRECTORY}/CMakeSystem.cmake + ${CMAKE_BINARY_DIR}${CMAKE_FILES_DIRECTORY}/CMakeSystem.cmake IMMEDIATE @ONLY) ENDIF(CMAKE_BINARY_DIR) diff --git a/Modules/CMakeFindBinUtils.cmake b/Modules/CMakeFindBinUtils.cmake index 64ec403..a5202f4 100644 --- a/Modules/CMakeFindBinUtils.cmake +++ b/Modules/CMakeFindBinUtils.cmake @@ -1,13 +1,13 @@ # search for additional tools required for C/C++ (and other languages ?) # -# If the internal cmake variable _CMAKE_TOOLCHAIN_PREFIX is set, this is used +# If the internal cmake variable _CMAKE_TOOLCHAIN_PREFIX is set, this is used # as prefix for the tools (e.g. arm-elf-gcc etc.) # If the cmake variable _CMAKE_TOOLCHAIN_LOCATION is set, the compiler is -# searched only there. The other tools are at first searched there, then +# searched only there. The other tools are at first searched there, then # also in the default locations. # -# Sets the following variables: +# Sets the following variables: # CMAKE_AR # CMAKE_RANLIB # CMAKE_LINKER @@ -30,7 +30,7 @@ # License text for the above reference.) # if it's the MS C/CXX compiler, search for link -IF("${CMAKE_CXX_COMPILER_ID}" MATCHES "MSVC" +IF("${CMAKE_CXX_COMPILER_ID}" MATCHES "MSVC" OR "${CMAKE_C_COMPILER_ID}" MATCHES "MSVC" OR "${CMAKE_GENERATOR}" MATCHES "Visual Studio") @@ -39,7 +39,7 @@ IF("${CMAKE_CXX_COMPILER_ID}" MATCHES "MSVC" MARK_AS_ADVANCED(CMAKE_LINKER) # in all other cases search for ar, ranlib, etc. -ELSE("${CMAKE_CXX_COMPILER_ID}" MATCHES "MSVC" +ELSE("${CMAKE_CXX_COMPILER_ID}" MATCHES "MSVC" OR "${CMAKE_C_COMPILER_ID}" MATCHES "MSVC" OR "${CMAKE_GENERATOR}" MATCHES "Visual Studio") @@ -58,7 +58,7 @@ ELSE("${CMAKE_CXX_COMPILER_ID}" MATCHES "MSVC" MARK_AS_ADVANCED(CMAKE_AR CMAKE_RANLIB CMAKE_STRIP CMAKE_LINKER CMAKE_NM CMAKE_OBJDUMP CMAKE_OBJCOPY) -ENDIF("${CMAKE_CXX_COMPILER_ID}" MATCHES "MSVC" +ENDIF("${CMAKE_CXX_COMPILER_ID}" MATCHES "MSVC" OR "${CMAKE_C_COMPILER_ID}" MATCHES "MSVC" OR "${CMAKE_GENERATOR}" MATCHES "Visual Studio") diff --git a/Modules/CMakeFortranInformation.cmake b/Modules/CMakeFortranInformation.cmake index d962f4c..b965e83 100644 --- a/Modules/CMakeFortranInformation.cmake +++ b/Modules/CMakeFortranInformation.cmake @@ -52,7 +52,7 @@ IF(CMAKE_Fortran_SIZEOF_DATA_PTR) ENDIF() # This should be included before the _INIT variables are -# used to initialize the cache. Since the rule variables +# used to initialize the cache. Since the rule variables # have if blocks on them, users can still define them here. # But, it should still be after the platform file so changes can # be made to those values. @@ -70,7 +70,7 @@ IF(CMAKE_USER_MAKE_RULES_OVERRIDE_Fortran) ENDIF() -# Fortran needs cmake to do a requires step during its build process to +# Fortran needs cmake to do a requires step during its build process to # catch any modules SET(CMAKE_NEEDS_REQUIRES_STEP_Fortran_FLAG 1) @@ -102,7 +102,7 @@ IF(NOT DEFINED CMAKE_SHARED_LIBRARY_LINK_Fortran_FLAGS) ENDIF() IF(NOT DEFINED CMAKE_SHARED_LIBRARY_RUNTIME_Fortran_FLAG) - SET(CMAKE_SHARED_LIBRARY_RUNTIME_Fortran_FLAG ${CMAKE_SHARED_LIBRARY_RUNTIME_C_FLAG}) + SET(CMAKE_SHARED_LIBRARY_RUNTIME_Fortran_FLAG ${CMAKE_SHARED_LIBRARY_RUNTIME_C_FLAG}) ENDIF() IF(NOT DEFINED CMAKE_SHARED_LIBRARY_RUNTIME_Fortran_FLAG_SEP) @@ -165,7 +165,7 @@ ENDIF(NOT CMAKE_INCLUDE_FLAG_SEP_Fortran) SET(CMAKE_VERBOSE_MAKEFILE FALSE CACHE BOOL "If this value is on, makefiles will be generated without the .SILENT directive, and all commands will be echoed to the console during the make. This is useful for debugging only. With Visual Studio IDE projects all commands are done without /nologo.") SET(CMAKE_Fortran_FLAGS_INIT "$ENV{FFLAGS} ${CMAKE_Fortran_FLAGS_INIT}") -# avoid just having a space as the initial value for the cache +# avoid just having a space as the initial value for the cache IF(CMAKE_Fortran_FLAGS_INIT STREQUAL " ") SET(CMAKE_Fortran_FLAGS_INIT) ENDIF(CMAKE_Fortran_FLAGS_INIT STREQUAL " ") diff --git a/Modules/CMakeJavaInformation.cmake b/Modules/CMakeJavaInformation.cmake index e192db1..7f812bd 100644 --- a/Modules/CMakeJavaInformation.cmake +++ b/Modules/CMakeJavaInformation.cmake @@ -13,7 +13,7 @@ # License text for the above reference.) # This should be included before the _INIT variables are -# used to initialize the cache. Since the rule variables +# used to initialize the cache. Since the rule variables # have if blocks on them, users can still define them here. # But, it should still be after the platform file so changes can # be made to those values. diff --git a/Modules/CMakeMSYSFindMake.cmake b/Modules/CMakeMSYSFindMake.cmake index 95492a0..29dc2c0 100644 --- a/Modules/CMakeMSYSFindMake.cmake +++ b/Modules/CMakeMSYSFindMake.cmake @@ -12,8 +12,8 @@ # (To distribute this file outside of CMake, substitute the full # License text for the above reference.) -FIND_PROGRAM(CMAKE_MAKE_PROGRAM make - PATHS +FIND_PROGRAM(CMAKE_MAKE_PROGRAM make + PATHS "[HKEY_LOCAL_MACHINE\\SOFTWARE\\Microsoft\\Windows\\CurrentVersion\\Uninstall\\MSYS-1.0_is1;Inno Setup: App Path]/bin" "[HKEY_LOCAL_MACHINE\\SOFTWARE\\Microsoft\\Windows\\CurrentVersion\\Uninstall\\MinGW;InstallLocation]/bin" c:/msys/1.0/bin /msys/1.0/bin) diff --git a/Modules/CMakeMinGWFindMake.cmake b/Modules/CMakeMinGWFindMake.cmake index f760d74..61ddb8c 100644 --- a/Modules/CMakeMinGWFindMake.cmake +++ b/Modules/CMakeMinGWFindMake.cmake @@ -13,7 +13,7 @@ # License text for the above reference.) FIND_PROGRAM(CMAKE_MAKE_PROGRAM mingw32-make.exe PATHS - "[HKEY_LOCAL_MACHINE\\SOFTWARE\\Microsoft\\Windows\\CurrentVersion\\Uninstall\\MinGW;InstallLocation]/bin" + "[HKEY_LOCAL_MACHINE\\SOFTWARE\\Microsoft\\Windows\\CurrentVersion\\Uninstall\\MinGW;InstallLocation]/bin" c:/MinGW/bin /MinGW/bin) FIND_PROGRAM(CMAKE_SH sh.exe ) IF(CMAKE_SH) diff --git a/Modules/CMakePlatformId.h.in b/Modules/CMakePlatformId.h.in index 6341dca..4b360f7 100644 --- a/Modules/CMakePlatformId.h.in +++ b/Modules/CMakePlatformId.h.in @@ -37,7 +37,7 @@ #elif defined(__HAIKU) || defined(__HAIKU__) || defined(_HAIKU) # define PLATFORM_ID "Haiku" -/* Haiku also defines __BEOS__ so we must +/* Haiku also defines __BEOS__ so we must put it prior to the check for __BEOS__ */ @@ -92,7 +92,7 @@ # define ARCHITECTURE_ID "IA64" # elif defined(_M_X64) || defined(_M_AMD64) -# define ARCHITECTURE_ID "x64" +# define ARCHITECTURE_ID "x64" # elif defined(_M_IX86) # define ARCHITECTURE_ID "X86" diff --git a/Modules/CMakeSystemSpecificInformation.cmake b/Modules/CMakeSystemSpecificInformation.cmake index faa9e36..88b7748 100644 --- a/Modules/CMakeSystemSpecificInformation.cmake +++ b/Modules/CMakeSystemSpecificInformation.cmake @@ -42,7 +42,7 @@ IF(NOT _INCLUDED_SYSTEM_INFO_FILE) IF(EXISTS ${CMAKE_BINARY_DIR}/CMakeCache.txt) CONFIGURE_FILE(${CMAKE_BINARY_DIR}/CMakeCache.txt ${CMAKE_BINARY_DIR}/CopyOfCMakeCache.txt COPYONLY) - MESSAGE("Your CMakeCache.txt file was copied to CopyOfCMakeCache.txt. " + MESSAGE("Your CMakeCache.txt file was copied to CopyOfCMakeCache.txt. " "Please send that file to cmake@www.cmake.org.") ENDIF(EXISTS ${CMAKE_BINARY_DIR}/CMakeCache.txt) ENDIF(NOT _INCLUDED_SYSTEM_INFO_FILE) diff --git a/Modules/CMakeTestCCompiler.cmake b/Modules/CMakeTestCCompiler.cmake index 779b2f0..5a86eb9 100644 --- a/Modules/CMakeTestCCompiler.cmake +++ b/Modules/CMakeTestCCompiler.cmake @@ -33,7 +33,7 @@ IF(NOT CMAKE_C_COMPILER_WORKS) "int main(int argc, char* argv[])\n" "#endif\n" "{ (void)argv; return argc-1;}\n") - TRY_COMPILE(CMAKE_C_COMPILER_WORKS ${CMAKE_BINARY_DIR} + TRY_COMPILE(CMAKE_C_COMPILER_WORKS ${CMAKE_BINARY_DIR} ${CMAKE_BINARY_DIR}${CMAKE_FILES_DIRECTORY}/CMakeTmp/testCCompiler.c OUTPUT_VARIABLE __CMAKE_C_COMPILER_OUTPUT) SET(C_TEST_WAS_RUN 1) diff --git a/Modules/CMakeTestCXXCompiler.cmake b/Modules/CMakeTestCXXCompiler.cmake index 87022e9..dadec1a 100644 --- a/Modules/CMakeTestCXXCompiler.cmake +++ b/Modules/CMakeTestCXXCompiler.cmake @@ -21,12 +21,12 @@ INCLUDE(CMakeTestCompilerCommon) # any makefiles or projects. IF(NOT CMAKE_CXX_COMPILER_WORKS) PrintTestCompilerStatus("CXX" "") - FILE(WRITE ${CMAKE_BINARY_DIR}${CMAKE_FILES_DIRECTORY}/CMakeTmp/testCXXCompiler.cxx + FILE(WRITE ${CMAKE_BINARY_DIR}${CMAKE_FILES_DIRECTORY}/CMakeTmp/testCXXCompiler.cxx "#ifndef __cplusplus\n" "# error \"The CMAKE_CXX_COMPILER is set to a C compiler\"\n" "#endif\n" "int main(){return 0;}\n") - TRY_COMPILE(CMAKE_CXX_COMPILER_WORKS ${CMAKE_BINARY_DIR} + TRY_COMPILE(CMAKE_CXX_COMPILER_WORKS ${CMAKE_BINARY_DIR} ${CMAKE_BINARY_DIR}${CMAKE_FILES_DIRECTORY}/CMakeTmp/testCXXCompiler.cxx OUTPUT_VARIABLE __CMAKE_CXX_COMPILER_OUTPUT) SET(CXX_TEST_WAS_RUN 1) diff --git a/Modules/CMakeTestFortranCompiler.cmake b/Modules/CMakeTestFortranCompiler.cmake index b4dcea6..b2fa16a 100644 --- a/Modules/CMakeTestFortranCompiler.cmake +++ b/Modules/CMakeTestFortranCompiler.cmake @@ -26,7 +26,7 @@ IF(NOT CMAKE_Fortran_COMPILER_WORKS) PRINT *, 'Hello' END ") - TRY_COMPILE(CMAKE_Fortran_COMPILER_WORKS ${CMAKE_BINARY_DIR} + TRY_COMPILE(CMAKE_Fortran_COMPILER_WORKS ${CMAKE_BINARY_DIR} ${CMAKE_BINARY_DIR}${CMAKE_FILES_DIRECTORY}/CMakeTmp/testFortranCompiler.f OUTPUT_VARIABLE OUTPUT) SET(FORTRAN_TEST_WAS_RUN 1) diff --git a/Modules/CMakeVS6BackwardCompatibility.cmake b/Modules/CMakeVS6BackwardCompatibility.cmake index 438f64f..c948ff4 100644 --- a/Modules/CMakeVS6BackwardCompatibility.cmake +++ b/Modules/CMakeVS6BackwardCompatibility.cmake @@ -20,7 +20,7 @@ SET (CMAKE_SIZEOF_CHAR 1 CACHE INTERNAL "Size of char data type") SET (CMAKE_SIZEOF_SHORT 2 CACHE INTERNAL "Size of short data type") SET (CMAKE_SIZEOF_FLOAT 4 CACHE INTERNAL "Size of float data type") SET (CMAKE_SIZEOF_DOUBLE 8 CACHE INTERNAL "Size of double data type") -SET (CMAKE_NO_ANSI_FOR_SCOPE 1 CACHE INTERNAL +SET (CMAKE_NO_ANSI_FOR_SCOPE 1 CACHE INTERNAL "Does the compiler support ansi for scope.") SET (CMAKE_USE_WIN32_THREADS TRUE CACHE BOOL "Use the win32 thread library.") SET (CMAKE_WORDS_BIGENDIAN 0 CACHE INTERNAL "endianness of bytes") diff --git a/Modules/CMakeVS7BackwardCompatibility.cmake b/Modules/CMakeVS7BackwardCompatibility.cmake index df0b3bb..9743c27 100644 --- a/Modules/CMakeVS7BackwardCompatibility.cmake +++ b/Modules/CMakeVS7BackwardCompatibility.cmake @@ -20,7 +20,7 @@ SET (CMAKE_SIZEOF_CHAR 1 CACHE INTERNAL "Size of char data type") SET (CMAKE_SIZEOF_SHORT 2 CACHE INTERNAL "Size of short data type") SET (CMAKE_SIZEOF_FLOAT 4 CACHE INTERNAL "Size of float data type") SET (CMAKE_SIZEOF_DOUBLE 8 CACHE INTERNAL "Size of double data type") -SET (CMAKE_NO_ANSI_FOR_SCOPE 0 CACHE INTERNAL +SET (CMAKE_NO_ANSI_FOR_SCOPE 0 CACHE INTERNAL "Does the compiler support ansi for scope.") SET (CMAKE_USE_WIN32_THREADS TRUE CACHE BOOL "Use the win32 thread library.") SET (CMAKE_WORDS_BIGENDIAN 0 CACHE INTERNAL "endianness of bytes") diff --git a/Modules/CMakeVerifyManifest.cmake b/Modules/CMakeVerifyManifest.cmake index 7578369..1d16e18 100644 --- a/Modules/CMakeVerifyManifest.cmake +++ b/Modules/CMakeVerifyManifest.cmake @@ -4,7 +4,7 @@ # side by side manifests for a project match. To run this # script, cd to a directory and run the script with cmake -P. # On the command line you can pass in versions that are OK even -# if not found in the .manifest files. For example, +# if not found in the .manifest files. For example, # cmake -Dallow_versions=8.0.50608.0 -PCmakeVerifyManifest.cmake # could be used to allow an embeded manifest of 8.0.50608.0 # to be used in a project even if that version was not found @@ -40,7 +40,7 @@ function(crt_version file list_var) foreach(s ${strings}) set(has_match 1) string(REGEX - REPLACE ".*<assembly.*\"Microsoft.VC...CRT\".*version=\"([^\"]*)\".*</assembly>.*$" "\\1" + REPLACE ".*<assembly.*\"Microsoft.VC...CRT\".*version=\"([^\"]*)\".*</assembly>.*$" "\\1" version "${s}") if(NOT "${version}" STREQUAL "") list(APPEND version_list ${version}) @@ -61,14 +61,14 @@ endfunction(crt_version) set(fatal_error FALSE) # check_version: -# +# # test a file against the shipped manifest versions # for a directory function(check_version file manifest_versions) set(manifest_versions ${manifest_versions} ${allow_versions}) # collect versions for a given file crt_version(${file} file_versions) - # see if the versions + # see if the versions foreach(ver ${file_versions}) list(FIND manifest_versions "${ver}" found_version) if("${found_version}" EQUAL -1) diff --git a/Modules/CPack.cmake b/Modules/CPack.cmake index 6575957..b79960e 100644 --- a/Modules/CPack.cmake +++ b/Modules/CPack.cmake @@ -187,7 +187,7 @@ # in CMake, so this change is compatible). ##end # -# The following CPack variables are specific to source packages, and +# The following CPack variables are specific to source packages, and # will not affect binary packages: # ##variable @@ -321,7 +321,7 @@ MACRO(cpack_encode_variables) SET(_CPACK_OTHER_VARIABLES_) GET_CMAKE_PROPERTY(res VARIABLES) FOREACH(var ${res}) - IF("xxx${var}" MATCHES "xxxCPACK") + IF("xxx${var}" MATCHES "xxxCPACK") SET(_CPACK_OTHER_VARIABLES_ "${_CPACK_OTHER_VARIABLES_}\nSET(${var} \"${${var}}\")") ENDIF("xxx${var}" MATCHES "xxxCPACK") @@ -440,7 +440,7 @@ if(NOT CPACK_GENERATOR) option(CPACK_BINARY_NSIS "Enable to build NSIS packages" ON) option(CPACK_BINARY_ZIP "Enable to build ZIP packages" OFF) endif(UNIX) - + cpack_optional_append(CPACK_GENERATOR CPACK_BINARY_BUNDLE Bundle) cpack_optional_append(CPACK_GENERATOR CPACK_BINARY_DRAGNDROP DragNDrop) cpack_optional_append(CPACK_GENERATOR CPACK_BINARY_PACKAGEMAKER PackageMaker) @@ -454,7 +454,7 @@ if(NOT CPACK_GENERATOR) cpack_optional_append(CPACK_GENERATOR CPACK_BINARY_TBZ2 TBZ2) cpack_optional_append(CPACK_GENERATOR CPACK_BINARY_TZ TZ) cpack_optional_append(CPACK_GENERATOR CPACK_BINARY_ZIP ZIP) - + endif(NOT CPACK_GENERATOR) # Provide options to choose source generators @@ -481,10 +481,10 @@ endif(NOT CPACK_SOURCE_GENERATOR) # mark the above options as advanced mark_as_advanced(CPACK_BINARY_CYGWIN CPACK_BINARY_PACKAGEMAKER CPACK_BINARY_OSXX11 - CPACK_BINARY_STGZ CPACK_BINARY_TGZ CPACK_BINARY_TBZ2 - CPACK_BINARY_DEB CPACK_BINARY_RPM CPACK_BINARY_TZ + CPACK_BINARY_STGZ CPACK_BINARY_TGZ CPACK_BINARY_TBZ2 + CPACK_BINARY_DEB CPACK_BINARY_RPM CPACK_BINARY_TZ CPACK_BINARY_NSIS CPACK_BINARY_ZIP CPACK_BINARY_BUNDLE - CPACK_SOURCE_CYGWIN CPACK_SOURCE_TBZ2 CPACK_SOURCE_TGZ + CPACK_SOURCE_CYGWIN CPACK_SOURCE_TBZ2 CPACK_SOURCE_TGZ CPACK_SOURCE_TZ CPACK_SOURCE_ZIP CPACK_BINARY_DRAGNDROP) # Set some other variables @@ -499,11 +499,11 @@ endif() # if the user has set CPACK_NSIS_DISPLAY # explicitly, then use that as the default # value of CPACK_NSIS_PACKAGE_NAME instead -# of CPACK_PACKAGE_INSTALL_DIRECTORY +# of CPACK_PACKAGE_INSTALL_DIRECTORY cpack_set_if_not_set(CPACK_NSIS_DISPLAY_NAME "${CPACK_PACKAGE_INSTALL_DIRECTORY}") if(CPACK_NSIS_DISPLAY_NAME_SET) - string(REPLACE "\\" "\\\\" + string(REPLACE "\\" "\\\\" _NSIS_DISPLAY_NAME_TMP "${CPACK_NSIS_DISPLAY_NAME}") cpack_set_if_not_set(CPACK_NSIS_PACKAGE_NAME "${_NSIS_DISPLAY_NAME_TMP}") else() diff --git a/Modules/CPackZIP.cmake b/Modules/CPackZIP.cmake index 99963cf..f80b439 100644 --- a/Modules/CPackZIP.cmake +++ b/Modules/CPackZIP.cmake @@ -23,7 +23,7 @@ IF(ZIP_EXECUTABLE) ENDIF(ZIP_EXECUTABLE) IF(NOT ZIP_EXECUTABLE) - FIND_PROGRAM(ZIP_EXECUTABLE 7z PATHS "$ENV{ProgramFiles}/7-Zip") + FIND_PROGRAM(ZIP_EXECUTABLE 7z PATHS "$ENV{ProgramFiles}/7-Zip") IF(ZIP_EXECUTABLE) SET(CPACK_ZIP_COMMAND "\"${ZIP_EXECUTABLE}\" a -tzip \"<ARCHIVE>\" @<FILELIST>") SET(CPACK_ZIP_NEED_QUOTES TRUE) diff --git a/Modules/CTest.cmake b/Modules/CTest.cmake index ec9dbeb..a32baa2 100644 --- a/Modules/CTest.cmake +++ b/Modules/CTest.cmake @@ -61,7 +61,7 @@ OPTION(BUILD_TESTING "Build the testing tree." ON) # function to turn generator name into a version string -# like vs7 vs71 vs8 vs9 +# like vs7 vs71 vs8 vs9 FUNCTION(GET_VS_VERSION_STRING generator var) STRING(REGEX REPLACE "Visual Studio ([0-9][0-9]?)($|.*)" "\\1" NUMBER "${generator}") @@ -122,7 +122,7 @@ IF(BUILD_TESTING) SET_IF_NOT_SET (NIGHTLY_START_TIME "00:00:00 EDT") FIND_PROGRAM(CVSCOMMAND cvs ) - SET(CVS_UPDATE_OPTIONS "-d -A -P" CACHE STRING + SET(CVS_UPDATE_OPTIONS "-d -A -P" CACHE STRING "Options passed to the cvs update command.") FIND_PROGRAM(SVNCOMMAND svn) FIND_PROGRAM(BZRCOMMAND bzr) @@ -161,7 +161,7 @@ IF(BUILD_TESTING) SET(UPDATE_OPTIONS "${GIT_UPDATE_OPTIONS}") ENDIF() - SET(DART_TESTING_TIMEOUT 1500 CACHE STRING + SET(DART_TESTING_TIMEOUT 1500 CACHE STRING "Maximum time allowed before CTest will kill the test.") SET(CTEST_SUBMIT_RETRY_DELAY 5 CACHE STRING @@ -181,12 +181,12 @@ IF(BUILD_TESTING) FIND_PROGRAM(SLURM_SRUN_COMMAND srun DOC "Path to the SLURM srun executable" ) - SET(MEMORYCHECK_SUPPRESSIONS_FILE "" CACHE FILEPATH + SET(MEMORYCHECK_SUPPRESSIONS_FILE "" CACHE FILEPATH "File that contains suppressions for the memory checker") - FIND_PROGRAM(SCPCOMMAND scp DOC + FIND_PROGRAM(SCPCOMMAND scp DOC "Path to scp command, used by CTest for submitting results to a Dart server" ) - FIND_PROGRAM(COVERAGE_COMMAND gcov DOC + FIND_PROGRAM(COVERAGE_COMMAND gcov DOC "Path to the coverage program that CTest uses for performing coverage inspection" ) SET(COVERAGE_EXTRA_FLAGS "-l" CACHE STRING @@ -215,10 +215,10 @@ IF(BUILD_TESTING) SET(BUILD_NAME_SYSTEM_NAME "Win32") ENDIF(WIN32) IF(UNIX OR BORLAND) - GET_FILENAME_COMPONENT(DART_CXX_NAME + GET_FILENAME_COMPONENT(DART_CXX_NAME "${CMAKE_CXX_COMPILER}" ${DART_NAME_COMPONENT}) ELSE(UNIX OR BORLAND) - GET_FILENAME_COMPONENT(DART_CXX_NAME + GET_FILENAME_COMPONENT(DART_CXX_NAME "${CMAKE_BUILD_TOOL}" ${DART_NAME_COMPONENT}) ENDIF(UNIX OR BORLAND) IF(DART_CXX_NAME MATCHES "msdev") @@ -267,7 +267,7 @@ IF(BUILD_TESTING) DART_TESTING_TIMEOUT GITCOMMAND HGCOMMAND - MAKECOMMAND + MAKECOMMAND MEMORYCHECK_COMMAND MEMORYCHECK_SUPPRESSIONS_FILE PURIFYCOMMAND diff --git a/Modules/CTestScriptMode.cmake b/Modules/CTestScriptMode.cmake index e459c1d..42d3764 100644 --- a/Modules/CTestScriptMode.cmake +++ b/Modules/CTestScriptMode.cmake @@ -14,7 +14,7 @@ # (To distribute this file outside of CMake, substitute the full # License text for the above reference.) -# Determine the current system, so this information can be used +# Determine the current system, so this information can be used # in ctest scripts include(CMakeDetermineSystem) diff --git a/Modules/CheckForPthreads.c b/Modules/CheckForPthreads.c index d831078..882dc21 100644 --- a/Modules/CheckForPthreads.c +++ b/Modules/CheckForPthreads.c @@ -15,7 +15,7 @@ int main(int ac, char*av[]){ pthread_t tid[2]; pthread_create(&tid[0], 0, runner, (void*)1); pthread_create(&tid[1], 0, runner, (void*)2); - + #if defined(__BEOS__) && !defined(__ZETA__) && !defined(__HAIKU__) // (no usleep on BeOS 5.) usleep(1); // for strange behavior on single-processor sun #endif diff --git a/Modules/CheckIncludeFile.cmake b/Modules/CheckIncludeFile.cmake index eb732d2..07a5ef8 100644 --- a/Modules/CheckIncludeFile.cmake +++ b/Modules/CheckIncludeFile.cmake @@ -3,8 +3,8 @@ # - macro which checks the include file exists. # INCLUDE - name of include file # VARIABLE - variable to return result -# -# an optional third argument is the CFlags to add to the compile line +# +# an optional third argument is the CFlags to add to the compile line # or you can use CMAKE_REQUIRED_FLAGS # # The following variables may be set before calling this macro to @@ -49,10 +49,10 @@ MACRO(CHECK_INCLUDE_FILE INCLUDE VARIABLE) ${CMAKE_BINARY_DIR} ${CMAKE_BINARY_DIR}${CMAKE_FILES_DIRECTORY}/CMakeTmp/CheckIncludeFile.c COMPILE_DEFINITIONS ${CMAKE_REQUIRED_DEFINITIONS} - CMAKE_FLAGS + CMAKE_FLAGS -DCOMPILE_DEFINITIONS:STRING=${MACRO_CHECK_INCLUDE_FILE_FLAGS} "${CHECK_INCLUDE_FILE_C_INCLUDE_DIRS}" - OUTPUT_VARIABLE OUTPUT) + OUTPUT_VARIABLE OUTPUT) IF(${ARGC} EQUAL 3) SET(CMAKE_C_FLAGS ${CMAKE_C_FLAGS_SAVE}) @@ -61,14 +61,14 @@ MACRO(CHECK_INCLUDE_FILE INCLUDE VARIABLE) IF(${VARIABLE}) MESSAGE(STATUS "Looking for ${INCLUDE} - found") SET(${VARIABLE} 1 CACHE INTERNAL "Have include ${INCLUDE}") - FILE(APPEND ${CMAKE_BINARY_DIR}${CMAKE_FILES_DIRECTORY}/CMakeOutput.log + FILE(APPEND ${CMAKE_BINARY_DIR}${CMAKE_FILES_DIRECTORY}/CMakeOutput.log "Determining if the include file ${INCLUDE} " "exists passed with the following output:\n" "${OUTPUT}\n\n") ELSE(${VARIABLE}) MESSAGE(STATUS "Looking for ${INCLUDE} - not found") SET(${VARIABLE} "" CACHE INTERNAL "Have include ${INCLUDE}") - FILE(APPEND ${CMAKE_BINARY_DIR}${CMAKE_FILES_DIRECTORY}/CMakeError.log + FILE(APPEND ${CMAKE_BINARY_DIR}${CMAKE_FILES_DIRECTORY}/CMakeError.log "Determining if the include file ${INCLUDE} " "exists failed with the following output:\n" "${OUTPUT}\n\n") diff --git a/Modules/CheckIncludeFileCXX.cmake b/Modules/CheckIncludeFileCXX.cmake index c5d8f9a..f27d253 100644 --- a/Modules/CheckIncludeFileCXX.cmake +++ b/Modules/CheckIncludeFileCXX.cmake @@ -3,8 +3,8 @@ # # INCLUDE - name of include file # VARIABLE - variable to return result -# -# An optional third argument is the CFlags to add to the compile line +# +# An optional third argument is the CFlags to add to the compile line # or you can use CMAKE_REQUIRED_FLAGS. # # The following variables may be set before calling this macro to @@ -49,10 +49,10 @@ MACRO(CHECK_INCLUDE_FILE_CXX INCLUDE VARIABLE) ${CMAKE_BINARY_DIR} ${CMAKE_BINARY_DIR}${CMAKE_FILES_DIRECTORY}/CMakeTmp/CheckIncludeFile.cxx COMPILE_DEFINITIONS ${CMAKE_REQUIRED_DEFINITIONS} - CMAKE_FLAGS + CMAKE_FLAGS -DCOMPILE_DEFINITIONS:STRING=${MACRO_CHECK_INCLUDE_FILE_FLAGS} "${CHECK_INCLUDE_FILE_CXX_INCLUDE_DIRS}" - OUTPUT_VARIABLE OUTPUT) + OUTPUT_VARIABLE OUTPUT) IF(${ARGC} EQUAL 3) SET(CMAKE_CXX_FLAGS ${CMAKE_CXX_FLAGS_SAVE}) @@ -61,14 +61,14 @@ MACRO(CHECK_INCLUDE_FILE_CXX INCLUDE VARIABLE) IF(${VARIABLE}) MESSAGE(STATUS "Looking for C++ include ${INCLUDE} - found") SET(${VARIABLE} 1 CACHE INTERNAL "Have include ${INCLUDE}") - FILE(APPEND ${CMAKE_BINARY_DIR}${CMAKE_FILES_DIRECTORY}/CMakeOutput.log + FILE(APPEND ${CMAKE_BINARY_DIR}${CMAKE_FILES_DIRECTORY}/CMakeOutput.log "Determining if the include file ${INCLUDE} " "exists passed with the following output:\n" "${OUTPUT}\n\n") ELSE(${VARIABLE}) MESSAGE(STATUS "Looking for C++ include ${INCLUDE} - not found") SET(${VARIABLE} "" CACHE INTERNAL "Have include ${INCLUDE}") - FILE(APPEND ${CMAKE_BINARY_DIR}${CMAKE_FILES_DIRECTORY}/CMakeError.log + FILE(APPEND ${CMAKE_BINARY_DIR}${CMAKE_FILES_DIRECTORY}/CMakeError.log "Determining if the include file ${INCLUDE} " "exists failed with the following output:\n" "${OUTPUT}\n\n") diff --git a/Modules/CheckIncludeFiles.cmake b/Modules/CheckIncludeFiles.cmake index a94644e..6901fbc 100644 --- a/Modules/CheckIncludeFiles.cmake +++ b/Modules/CheckIncludeFiles.cmake @@ -59,21 +59,21 @@ MACRO(CHECK_INCLUDE_FILES INCLUDE VARIABLE) ${CMAKE_BINARY_DIR} ${CMAKE_BINARY_DIR}${CMAKE_FILES_DIRECTORY}/CMakeTmp/CheckIncludeFiles.c COMPILE_DEFINITIONS ${CMAKE_REQUIRED_DEFINITIONS} - CMAKE_FLAGS + CMAKE_FLAGS -DCOMPILE_DEFINITIONS:STRING=${MACRO_CHECK_INCLUDE_FILES_FLAGS} "${CHECK_INCLUDE_FILES_INCLUDE_DIRS}" OUTPUT_VARIABLE OUTPUT) IF(${VARIABLE}) MESSAGE(STATUS "Looking for ${_description} - found") SET(${VARIABLE} 1 CACHE INTERNAL "Have include ${INCLUDE}") - FILE(APPEND ${CMAKE_BINARY_DIR}${CMAKE_FILES_DIRECTORY}/CMakeOutput.log + FILE(APPEND ${CMAKE_BINARY_DIR}${CMAKE_FILES_DIRECTORY}/CMakeOutput.log "Determining if files ${INCLUDE} " "exist passed with the following output:\n" "${OUTPUT}\n\n") ELSE(${VARIABLE}) MESSAGE(STATUS "Looking for ${_description} - not found.") SET(${VARIABLE} "" CACHE INTERNAL "Have includes ${INCLUDE}") - FILE(APPEND ${CMAKE_BINARY_DIR}${CMAKE_FILES_DIRECTORY}/CMakeError.log + FILE(APPEND ${CMAKE_BINARY_DIR}${CMAKE_FILES_DIRECTORY}/CMakeError.log "Determining if files ${INCLUDE} " "exist failed with the following output:\n" "${OUTPUT}\nSource:\n${CMAKE_CONFIGURABLE_FILE_CONTENT}\n") diff --git a/Modules/Dart.cmake b/Modules/Dart.cmake index 8705454..e85f093 100644 --- a/Modules/Dart.cmake +++ b/Modules/Dart.cmake @@ -48,14 +48,14 @@ IF(BUILD_TESTING) INCLUDE(CTest) SET(RUN_FROM_DART) - FIND_PROGRAM(COMPRESSIONCOMMAND NAMES gzip compress zip + FIND_PROGRAM(COMPRESSIONCOMMAND NAMES gzip compress zip DOC "Path to program used to compress files for transfer to the dart server") FIND_PROGRAM(GUNZIPCOMMAND gunzip DOC "Path to gunzip executable") FIND_PROGRAM(JAVACOMMAND java DOC "Path to java command, used by the Dart server to create html.") - OPTION(DART_VERBOSE_BUILD "Show the actual output of the build, or if off show a . for each 1024 bytes." + OPTION(DART_VERBOSE_BUILD "Show the actual output of the build, or if off show a . for each 1024 bytes." OFF) - OPTION(DART_BUILD_ERROR_REPORT_LIMIT "Limit of reported errors, -1 reports all." -1 ) - OPTION(DART_BUILD_WARNING_REPORT_LIMIT "Limit of reported warnings, -1 reports all." -1 ) + OPTION(DART_BUILD_ERROR_REPORT_LIMIT "Limit of reported errors, -1 reports all." -1 ) + OPTION(DART_BUILD_WARNING_REPORT_LIMIT "Limit of reported warnings, -1 reports all." -1 ) SET(VERBOSE_BUILD ${DART_VERBOSE_BUILD}) SET(BUILD_ERROR_REPORT_LIMIT ${DART_BUILD_ERROR_REPORT_LIMIT}) @@ -64,13 +64,13 @@ IF(BUILD_TESTING) MARK_AS_ADVANCED( COMPRESSIONCOMMAND - DART_BUILD_ERROR_REPORT_LIMIT - DART_BUILD_WARNING_REPORT_LIMIT + DART_BUILD_ERROR_REPORT_LIMIT + DART_BUILD_WARNING_REPORT_LIMIT DART_TESTING_TIMEOUT DART_VERBOSE_BUILD DELIVER_CONTINUOUS_EMAIL GUNZIPCOMMAND - JAVACOMMAND + JAVACOMMAND ) SET(HAVE_DART) @@ -80,7 +80,7 @@ IF(BUILD_TESTING) # # Section #2: - # + # # Make necessary directories and configure testing scripts # # find a tcl shell command @@ -112,7 +112,7 @@ IF(BUILD_TESTING) SET(DART_EXPERIMENTAL_NAME "${DART_EXPERIMENTAL_NAME}${PROJECT_NAME}") ENDIF(DART_EXPERIMENTAL_USE_PROJECT_NAME) ENDIF (HAVE_DART) - + SET(RUN_FROM_CTEST_OR_DART 1) INCLUDE(CTestTargets) SET(RUN_FROM_CTEST_OR_DART) diff --git a/Modules/Documentation.cmake b/Modules/Documentation.cmake index ffeb371..aff78c9 100644 --- a/Modules/Documentation.cmake +++ b/Modules/Documentation.cmake @@ -33,10 +33,10 @@ IF (BUILD_DOCUMENTATION) FIND_PACKAGE(Perl) FIND_PACKAGE(Wget) - OPTION(DOCUMENTATION_HTML_HELP + OPTION(DOCUMENTATION_HTML_HELP "Build the HTML Help file (CHM)." OFF) - OPTION(DOCUMENTATION_HTML_TARZ + OPTION(DOCUMENTATION_HTML_TARZ "Build a compressed tar archive of the HTML doc." OFF) MARK_AS_ADVANCED( @@ -44,7 +44,7 @@ IF (BUILD_DOCUMENTATION) DOCUMENTATION_HTML_TARZ ) - # + # # The documentation process is controled by a batch file. # We will probably need bash to create the custom target # diff --git a/Modules/FindALSA.cmake b/Modules/FindALSA.cmake index 4a0b693..60b0f56 100644 --- a/Modules/FindALSA.cmake +++ b/Modules/FindALSA.cmake @@ -40,7 +40,7 @@ if(ALSA_INCLUDE_DIR AND EXISTS "${ALSA_INCLUDE_DIR}/alsa/version.h") unset(alsa_version_str) endif() -# handle the QUIETLY and REQUIRED arguments and set ALSA_FOUND to TRUE if +# handle the QUIETLY and REQUIRED arguments and set ALSA_FOUND to TRUE if # all listed variables are TRUE include(${CMAKE_CURRENT_LIST_DIR}/FindPackageHandleStandardArgs.cmake) FIND_PACKAGE_HANDLE_STANDARD_ARGS(ALSA diff --git a/Modules/FindAVIFile.cmake b/Modules/FindAVIFile.cmake index 8b5b05a..a45ebf8 100644 --- a/Modules/FindAVIFile.cmake +++ b/Modules/FindAVIFile.cmake @@ -1,5 +1,5 @@ # - Locate AVIFILE library and include paths -# AVIFILE (http://avifile.sourceforge.net/)is a set of libraries for +# AVIFILE (http://avifile.sourceforge.net/)is a set of libraries for # i386 machines # to use various AVI codecs. Support is limited beyond Linux. Windows # provides native AVI support, and so doesn't need this library. diff --git a/Modules/FindBZip2.cmake b/Modules/FindBZip2.cmake index ce7f255..75ab500 100644 --- a/Modules/FindBZip2.cmake +++ b/Modules/FindBZip2.cmake @@ -41,7 +41,7 @@ IF (BZIP2_INCLUDE_DIR AND EXISTS "${BZIP2_INCLUDE_DIR}/bzlib.h") STRING(REGEX REPLACE ".* bzip2/libbzip2 version ([0-9]+\\.[^ ]+) of [0-9]+ .*" "\\1" BZIP2_VERSION_STRING "${BZLIB_H}") ENDIF (BZIP2_INCLUDE_DIR AND EXISTS "${BZIP2_INCLUDE_DIR}/bzlib.h") -# handle the QUIETLY and REQUIRED arguments and set BZip2_FOUND to TRUE if +# handle the QUIETLY and REQUIRED arguments and set BZip2_FOUND to TRUE if # all listed variables are TRUE INCLUDE(${CMAKE_CURRENT_LIST_DIR}/FindPackageHandleStandardArgs.cmake) FIND_PACKAGE_HANDLE_STANDARD_ARGS(BZip2 diff --git a/Modules/FindBullet.cmake b/Modules/FindBullet.cmake index c96755f..1c4a9de 100644 --- a/Modules/FindBullet.cmake +++ b/Modules/FindBullet.cmake @@ -29,7 +29,7 @@ macro(_FIND_BULLET_LIBRARY _var) find_library(${_var} - NAMES + NAMES ${ARGN} HINTS ${BULLET_ROOT} @@ -68,7 +68,7 @@ _FIND_BULLET_LIBRARY(BULLET_SOFTBODY_LIBRARY BulletSoftBody) _FIND_BULLET_LIBRARY(BULLET_SOFTBODY_LIBRARY_DEBUG BulletSoftBody_Debug BulletSoftBody_d) -# handle the QUIETLY and REQUIRED arguments and set BULLET_FOUND to TRUE if +# handle the QUIETLY and REQUIRED arguments and set BULLET_FOUND to TRUE if # all listed variables are TRUE include(${CMAKE_CURRENT_LIST_DIR}/FindPackageHandleStandardArgs.cmake) FIND_PACKAGE_HANDLE_STANDARD_ARGS(Bullet DEFAULT_MSG diff --git a/Modules/FindCURL.cmake b/Modules/FindCURL.cmake index cc00d53..5f2181a 100644 --- a/Modules/FindCURL.cmake +++ b/Modules/FindCURL.cmake @@ -25,7 +25,7 @@ FIND_PATH(CURL_INCLUDE_DIR NAMES curl/curl.h) MARK_AS_ADVANCED(CURL_INCLUDE_DIR) # Look for the library. -FIND_LIBRARY(CURL_LIBRARY NAMES +FIND_LIBRARY(CURL_LIBRARY NAMES curl # Windows MSVC prebuilts: curllib @@ -46,7 +46,7 @@ IF(CURL_INCLUDE_DIR) ENDFOREACH(_curl_version_header) ENDIF() -# handle the QUIETLY and REQUIRED arguments and set CURL_FOUND to TRUE if +# handle the QUIETLY and REQUIRED arguments and set CURL_FOUND to TRUE if # all listed variables are TRUE INCLUDE(${CMAKE_CURRENT_LIST_DIR}/FindPackageHandleStandardArgs.cmake) FIND_PACKAGE_HANDLE_STANDARD_ARGS(CURL diff --git a/Modules/FindCVS.cmake b/Modules/FindCVS.cmake index 57680bd..84bcaa1 100644 --- a/Modules/FindCVS.cmake +++ b/Modules/FindCVS.cmake @@ -24,31 +24,31 @@ get_filename_component( CVSNT_TypeLib_Win32 - "[HKEY_CLASSES_ROOT\\TypeLib\\{2BDF7A65-0BFE-4B1A-9205-9AB900C7D0DA}\\1.0\\0\\win32]" + "[HKEY_CLASSES_ROOT\\TypeLib\\{2BDF7A65-0BFE-4B1A-9205-9AB900C7D0DA}\\1.0\\0\\win32]" PATH) get_filename_component( CVSNT_Services_EventMessagePath - "[HKEY_LOCAL_MACHINE\\SYSTEM\\ControlSet001\\Services\\Eventlog\\Application\\cvsnt;EventMessageFile]" + "[HKEY_LOCAL_MACHINE\\SYSTEM\\ControlSet001\\Services\\Eventlog\\Application\\cvsnt;EventMessageFile]" PATH) # WinCVS (in case CVSNT was installed in the same directory) get_filename_component( WinCVS_Folder_Command - "[HKEY_LOCAL_MACHINE\\SOFTWARE\\Classes\\Folder\\shell\\wincvs\\command]" + "[HKEY_LOCAL_MACHINE\\SOFTWARE\\Classes\\Folder\\shell\\wincvs\\command]" PATH) # TortoiseCVS (in case CVSNT was installed in the same directory) get_filename_component( TortoiseCVS_Folder_Command - "[HKEY_CLASSES_ROOT\\CVS\\shell\\open\\command]" + "[HKEY_CLASSES_ROOT\\CVS\\shell\\open\\command]" PATH) get_filename_component( TortoiseCVS_DefaultIcon - "[HKEY_CLASSES_ROOT\\CVS\\DefaultIcon]" + "[HKEY_CLASSES_ROOT\\CVS\\DefaultIcon]" PATH) find_program(CVS_EXECUTABLE cvs @@ -62,7 +62,7 @@ find_program(CVS_EXECUTABLE cvs ) mark_as_advanced(CVS_EXECUTABLE) -# Handle the QUIETLY and REQUIRED arguments and set CVS_FOUND to TRUE if +# Handle the QUIETLY and REQUIRED arguments and set CVS_FOUND to TRUE if # all listed variables are TRUE include(${CMAKE_CURRENT_LIST_DIR}/FindPackageHandleStandardArgs.cmake) diff --git a/Modules/FindCoin3D.cmake b/Modules/FindCoin3D.cmake index 8bfe97a..2b4c914 100644 --- a/Modules/FindCoin3D.cmake +++ b/Modules/FindCoin3D.cmake @@ -59,22 +59,22 @@ IF (WIN32) ELSE (WIN32) IF(APPLE) FIND_PATH(COIN3D_INCLUDE_DIRS Inventor/So.h - /Library/Frameworks/Inventor.framework/Headers + /Library/Frameworks/Inventor.framework/Headers ) FIND_LIBRARY(COIN3D_LIBRARIES Coin /Library/Frameworks/Inventor.framework/Libraries - ) + ) SET(COIN3D_LIBRARIES "-framework Coin3d" CACHE STRING "Coin3D library for OSX") ELSE(APPLE) FIND_PATH(COIN3D_INCLUDE_DIRS Inventor/So.h) - FIND_LIBRARY(COIN3D_LIBRARIES Coin) + FIND_LIBRARY(COIN3D_LIBRARIES Coin) ENDIF(APPLE) ENDIF (WIN32) -# handle the QUIETLY and REQUIRED arguments and set COIN3D_FOUND to TRUE if +# handle the QUIETLY and REQUIRED arguments and set COIN3D_FOUND to TRUE if # all listed variables are TRUE INCLUDE(${CMAKE_CURRENT_LIST_DIR}/FindPackageHandleStandardArgs.cmake) FIND_PACKAGE_HANDLE_STANDARD_ARGS(Coin3D DEFAULT_MSG COIN3D_LIBRARIES COIN3D_INCLUDE_DIRS) diff --git a/Modules/FindCups.cmake b/Modules/FindCups.cmake index 3862f7d..05d2c27 100644 --- a/Modules/FindCups.cmake +++ b/Modules/FindCups.cmake @@ -5,7 +5,7 @@ # CUPS_INCLUDE_DIR - the Cups include directory # CUPS_LIBRARIES - Libraries needed to use Cups # CUPS_VERSION_STRING - version of Cups found (since CMake 2.8.8) -# Set CUPS_REQUIRE_IPP_DELETE_ATTRIBUTE to TRUE if you need a version which +# Set CUPS_REQUIRE_IPP_DELETE_ATTRIBUTE to TRUE if you need a version which # features this function (i.e. at least 1.1.19) #============================================================================= @@ -65,5 +65,5 @@ else (CUPS_REQUIRE_IPP_DELETE_ATTRIBUTE) REQUIRED_VARS CUPS_LIBRARIES CUPS_INCLUDE_DIR VERSION_VAR CUPS_VERSION_STRING) endif (CUPS_REQUIRE_IPP_DELETE_ATTRIBUTE) - + mark_as_advanced(CUPS_INCLUDE_DIR CUPS_LIBRARIES) diff --git a/Modules/FindCurses.cmake b/Modules/FindCurses.cmake index d1e1311..0ea5166 100644 --- a/Modules/FindCurses.cmake +++ b/Modules/FindCurses.cmake @@ -9,7 +9,7 @@ # CURSES_HAVE_NCURSES_CURSES_H - true if ncurses/curses.h is available # CURSES_LIBRARY - set for backwards compatibility with 2.4 CMake # -# Set CURSES_NEED_NCURSES to TRUE before the FIND_PACKAGE() command if NCurses +# Set CURSES_NEED_NCURSES to TRUE before the FIND_PACKAGE() command if NCurses # functionality is required. #============================================================================= @@ -53,15 +53,15 @@ ENDIF() # some web pages also say that even with ncurses there is not always a ncurses.h: # http://osdir.com/ml/gnome.apps.mc.devel/2002-06/msg00029.html # So at first try ncurses.h, if not found, try to find curses.h under the same -# prefix as the library was found, if still not found, try curses.h with the +# prefix as the library was found, if still not found, try curses.h with the # default search paths. IF(CURSES_CURSES_LIBRARY AND CURSES_NEED_NCURSES) INCLUDE(CheckLibraryExists) - CHECK_LIBRARY_EXISTS("${CURSES_CURSES_LIBRARY}" + CHECK_LIBRARY_EXISTS("${CURSES_CURSES_LIBRARY}" wsyncup "" CURSES_CURSES_HAS_WSYNCUP) IF(CURSES_NCURSES_LIBRARY AND NOT CURSES_CURSES_HAS_WSYNCUP) - CHECK_LIBRARY_EXISTS("${CURSES_NCURSES_LIBRARY}" + CHECK_LIBRARY_EXISTS("${CURSES_NCURSES_LIBRARY}" wsyncup "" CURSES_NCURSES_HAS_WSYNCUP) IF( CURSES_NCURSES_HAS_WSYNCUP) SET(CURSES_USE_NCURSES TRUE) @@ -79,7 +79,7 @@ IF(NOT CURSES_USE_NCURSES) # for compatibility with older FindCurses.cmake this has to be in the cache # FORCE must not be used since this would break builds which preload a cache wqith these variables set - SET(CURSES_INCLUDE_PATH "${CURSES_CURSES_H_PATH}" + SET(CURSES_INCLUDE_PATH "${CURSES_CURSES_H_PATH}" CACHE FILEPATH "The curses include path") SET(CURSES_LIBRARY "${CURSES_CURSES_LIBRARY}" CACHE FILEPATH "The curses library") @@ -91,23 +91,23 @@ ELSE(NOT CURSES_USE_NCURSES) FIND_FILE(CURSES_HAVE_NCURSES_H ncurses.h) FIND_FILE(CURSES_HAVE_NCURSES_NCURSES_H ncurses/ncurses.h) FIND_FILE(CURSES_HAVE_NCURSES_CURSES_H ncurses/curses.h) - FIND_FILE(CURSES_HAVE_CURSES_H curses.h + FIND_FILE(CURSES_HAVE_CURSES_H curses.h HINTS "${_cursesParentDir}/include") - FIND_PATH(CURSES_NCURSES_INCLUDE_PATH ncurses.h ncurses/ncurses.h + FIND_PATH(CURSES_NCURSES_INCLUDE_PATH ncurses.h ncurses/ncurses.h ncurses/curses.h) FIND_PATH(CURSES_NCURSES_INCLUDE_PATH curses.h HINTS "${_cursesParentDir}/include") # for compatibility with older FindCurses.cmake this has to be in the cache # FORCE must not be used since this would break builds which preload - # however if the value of the variable has NOTFOUND in it, then + # however if the value of the variable has NOTFOUND in it, then # it is OK to force, and we need to force in order to have it work. # a cache wqith these variables set - # only put ncurses include and library into + # only put ncurses include and library into # variables if they are found IF(NOT CURSES_NCURSES_INCLUDE_PATH AND CURSES_HAVE_NCURSES_NCURSES_H) - GET_FILENAME_COMPONENT(CURSES_NCURSES_INCLUDE_PATH + GET_FILENAME_COMPONENT(CURSES_NCURSES_INCLUDE_PATH "${CURSES_HAVE_NCURSES_NCURSES_H}" PATH) ENDIF(NOT CURSES_NCURSES_INCLUDE_PATH AND CURSES_HAVE_NCURSES_NCURSES_H) IF(CURSES_NCURSES_INCLUDE_PATH AND CURSES_NCURSES_LIBRARY) @@ -115,13 +115,13 @@ ELSE(NOT CURSES_USE_NCURSES) IF(CURSES_INCLUDE_PATH MATCHES NOTFOUND) SET(FORCE_IT FORCE) ENDIF(CURSES_INCLUDE_PATH MATCHES NOTFOUND) - SET(CURSES_INCLUDE_PATH "${CURSES_NCURSES_INCLUDE_PATH}" + SET(CURSES_INCLUDE_PATH "${CURSES_NCURSES_INCLUDE_PATH}" CACHE FILEPATH "The curses include path" ${FORCE_IT}) SET( FORCE_IT) IF(CURSES_LIBRARY MATCHES NOTFOUND) SET(FORCE_IT FORCE) ENDIF(CURSES_LIBRARY MATCHES NOTFOUND) - SET(CURSES_LIBRARY "${CURSES_NCURSES_LIBRARY}" + SET(CURSES_LIBRARY "${CURSES_NCURSES_LIBRARY}" CACHE FILEPATH "The curses library" ${FORCE_IT}) ENDIF(CURSES_NCURSES_INCLUDE_PATH AND CURSES_NCURSES_LIBRARY) @@ -136,7 +136,7 @@ FIND_LIBRARY(CURSES_FORM_LIBRARY form ) # for compatibility with older FindCurses.cmake this has to be in the cache # FORCE must not be used since this would break builds which preload a cache # qith these variables set -SET(FORM_LIBRARY "${CURSES_FORM_LIBRARY}" +SET(FORM_LIBRARY "${CURSES_FORM_LIBRARY}" CACHE FILEPATH "The curses form library") # Need to provide the *_LIBRARIES @@ -153,7 +153,7 @@ ENDIF(CURSES_FORM_LIBRARY) # Proper name is *_INCLUDE_DIR SET(CURSES_INCLUDE_DIR ${CURSES_INCLUDE_PATH}) -# handle the QUIETLY and REQUIRED arguments and set CURSES_FOUND to TRUE if +# handle the QUIETLY and REQUIRED arguments and set CURSES_FOUND to TRUE if # all listed variables are TRUE INCLUDE(${CMAKE_CURRENT_LIST_DIR}/FindPackageHandleStandardArgs.cmake) FIND_PACKAGE_HANDLE_STANDARD_ARGS(Curses DEFAULT_MSG diff --git a/Modules/FindCxxTest.cmake b/Modules/FindCxxTest.cmake index a4d1504..4207961 100644 --- a/Modules/FindCxxTest.cmake +++ b/Modules/FindCxxTest.cmake @@ -49,7 +49,7 @@ # input_files_to_testgen The list of header files containing the # CxxTest::TestSuite's to be included in # this runner -# +# # #============== # Example Usage: # @@ -67,13 +67,13 @@ # 1. Invoke the testgen executable to autogenerate foo_test.cc in the # binary tree from "foo_test.h" in the current source directory. # 2. Create an executable and test called unittest_foo. -# +# # #============= # Example foo_test.h: # # #include <cxxtest/TestSuite.h> -# -# class MyTestSuite : public CxxTest::TestSuite +# +# class MyTestSuite : public CxxTest::TestSuite # { # public: # void testAddition( void ) diff --git a/Modules/FindDart.cmake b/Modules/FindDart.cmake index f7c54df..caca4b8 100644 --- a/Modules/FindDart.cmake +++ b/Modules/FindDart.cmake @@ -16,14 +16,14 @@ # (To distribute this file outside of CMake, substitute the full # License text for the above reference.) -FIND_PATH(DART_ROOT README.INSTALL +FIND_PATH(DART_ROOT README.INSTALL $ENV{DART_ROOT} - ${PROJECT_SOURCE_DIR}/Dart - /usr/share/Dart - C:/Dart + ${PROJECT_SOURCE_DIR}/Dart + /usr/share/Dart + C:/Dart "$ENV{ProgramFiles}/Dart" - "C:/Program Files/Dart" - ${PROJECT_SOURCE_DIR}/../Dart + "C:/Program Files/Dart" + ${PROJECT_SOURCE_DIR}/../Dart [HKEY_LOCAL_MACHINE\\SOFTWARE\\Dart\\InstallPath] DOC "If you have Dart installed, where is it located?" ) diff --git a/Modules/FindDevIL.cmake b/Modules/FindDevIL.cmake index 4a0fbe0..ebfe298 100644 --- a/Modules/FindDevIL.cmake +++ b/Modules/FindDevIL.cmake @@ -38,7 +38,7 @@ INCLUDE(${CMAKE_CURRENT_LIST_DIR}/FindPackageHandleStandardArgs.cmake) -FIND_PATH(IL_INCLUDE_DIR il.h +FIND_PATH(IL_INCLUDE_DIR il.h PATH_SUFFIXES include IL DOC "The path the the directory that contains il.h" ) @@ -69,6 +69,6 @@ FIND_LIBRARY(ILU_LIBRARIES #MESSAGE("ILU_LIBRARIES is ${ILU_LIBRARIES}") -FIND_PACKAGE_HANDLE_STANDARD_ARGS(IL DEFAULT_MSG - IL_LIBRARIES ILU_LIBRARIES +FIND_PACKAGE_HANDLE_STANDARD_ARGS(IL DEFAULT_MSG + IL_LIBRARIES ILU_LIBRARIES ILUT_LIBRARIES IL_INCLUDE_DIR) diff --git a/Modules/FindDoxygen.cmake b/Modules/FindDoxygen.cmake index 6cc9efb..a004d7b 100644 --- a/Modules/FindDoxygen.cmake +++ b/Modules/FindDoxygen.cmake @@ -39,13 +39,13 @@ ENDIF(Doxygen_FIND_QUIETLY) # ===== Rationale for OS X AppBundle mods below ===== # With the OS X GUI version, Doxygen likes to be installed to /Applications and -# it contains the doxygen executable in the bundle. In the versions I've -# seen, it is located in Resources, but in general, more often binaries are +# it contains the doxygen executable in the bundle. In the versions I've +# seen, it is located in Resources, but in general, more often binaries are # located in MacOS. # -# NOTE: The official Doxygen.app that is distributed for OS X uses non-standard +# NOTE: The official Doxygen.app that is distributed for OS X uses non-standard # conventions. Instead of the command-line "doxygen" tool being placed in -# Doxygen.app/Contents/MacOS, "Doxywizard" is placed there instead and +# Doxygen.app/Contents/MacOS, "Doxywizard" is placed there instead and # "doxygen" is placed in Contents/Resources. This is most likely done # so that something happens when people double-click on the Doxygen.app # package. Unfortunately, CMake gets confused by this as when it sees the @@ -59,7 +59,7 @@ if(APPLE) SET(CMAKE_FIND_APPBUNDLE "NEVER") endif() # FYI: -# In the older versions of OS X Doxygen, dot was included with the +# In the older versions of OS X Doxygen, dot was included with the # Doxygen bundle. But the new versions require you to download # Graphviz.app which contains "dot" in it's bundle. # ============== End OSX stuff ================ @@ -91,7 +91,7 @@ FIND_PACKAGE_HANDLE_STANDARD_ARGS(Doxygen REQUIRED_VARS DOXYGEN_EXECUTABLE VERSI IF(NOT DOXYGEN_SKIP_DOT) FIND_PROGRAM(DOXYGEN_DOT_EXECUTABLE NAMES dot - PATHS + PATHS "$ENV{ProgramFiles}/Graphviz 2.21/bin" "C:/Program Files/Graphviz 2.21/bin" "$ENV{ProgramFiles}/ATT/Graphviz/bin" @@ -102,13 +102,13 @@ IF(NOT DOXYGEN_SKIP_DOT) /Applications/Doxygen.app/Contents/MacOS DOC "Graphviz Dot tool for using Doxygen" ) - + if(DOXYGEN_DOT_EXECUTABLE) set(DOXYGEN_DOT_FOUND TRUE) # The Doxyfile wants the path to Dot, not the entire path and executable get_filename_component(DOXYGEN_DOT_PATH "${DOXYGEN_DOT_EXECUTABLE}" PATH CACHE) endif() - + endif(NOT DOXYGEN_SKIP_DOT) # diff --git a/Modules/FindEXPAT.cmake b/Modules/FindEXPAT.cmake index 1bf0743..7a6dbbb 100644 --- a/Modules/FindEXPAT.cmake +++ b/Modules/FindEXPAT.cmake @@ -44,7 +44,7 @@ if (EXPAT_INCLUDE_DIR AND EXISTS "${EXPAT_INCLUDE_DIR}/expat.h") endforeach(VPART) endif (EXPAT_INCLUDE_DIR AND EXISTS "${EXPAT_INCLUDE_DIR}/expat.h") -# handle the QUIETLY and REQUIRED arguments and set EXPAT_FOUND to TRUE if +# handle the QUIETLY and REQUIRED arguments and set EXPAT_FOUND to TRUE if # all listed variables are TRUE INCLUDE(${CMAKE_CURRENT_LIST_DIR}/FindPackageHandleStandardArgs.cmake) FIND_PACKAGE_HANDLE_STANDARD_ARGS(EXPAT diff --git a/Modules/FindFLTK.cmake b/Modules/FindFLTK.cmake index bdea95b..8a656f6 100644 --- a/Modules/FindFLTK.cmake +++ b/Modules/FindFLTK.cmake @@ -136,8 +136,8 @@ ENDIF(NOT FLTK_DIR) # Fluid IF(FLUID_COMMAND) SET(FLTK_FLUID_EXECUTABLE ${FLUID_COMMAND} CACHE FILEPATH "Fluid executable") - ELSE(FLUID_COMMAND) - FIND_PROGRAM(FLTK_FLUID_EXECUTABLE fluid PATHS + ELSE(FLUID_COMMAND) + FIND_PROGRAM(FLTK_FLUID_EXECUTABLE fluid PATHS ${FLTK_EXECUTABLE_DIRS} ${FLTK_EXECUTABLE_DIRS}/RelWithDebInfo ${FLTK_EXECUTABLE_DIRS}/Debug @@ -220,10 +220,10 @@ ENDIF(NOT FLTK_DIR) ${_FLTK_POSSIBLE_INCLUDE_DIRS} ) - FIND_PATH(FLTK_INCLUDE_DIR + FIND_PATH(FLTK_INCLUDE_DIR NAMES FL/Fl.h FL/Fl.H # fltk 1.1.9 has Fl.H (#8376) PATHS ${FLTK_INCLUDE_SEARCH_PATH}) - + # # Try to find FLTK library IF(UNIX) diff --git a/Modules/FindFLTK2.cmake b/Modules/FindFLTK2.cmake index 9164745..c6a9788 100644 --- a/Modules/FindFLTK2.cmake +++ b/Modules/FindFLTK2.cmake @@ -122,10 +122,10 @@ IF(FLTK2_DIR) INCLUDE(${FLTK2_DIR}/FLTK2Config.cmake) # Fluid - IF(FLUID_COMMAND) + IF(FLUID_COMMAND) SET(FLTK2_FLUID_EXECUTABLE ${FLUID_COMMAND} CACHE FILEPATH "Fluid executable") - ELSE(FLUID_COMMAND) - FIND_PROGRAM(FLTK2_FLUID_EXECUTABLE fluid2 PATHS + ELSE(FLUID_COMMAND) + FIND_PROGRAM(FLTK2_FLUID_EXECUTABLE fluid2 PATHS ${FLTK2_EXECUTABLE_DIRS} ${FLTK2_EXECUTABLE_DIRS}/RelWithDebInfo ${FLTK2_EXECUTABLE_DIRS}/Debug @@ -136,7 +136,7 @@ IF(FLTK2_DIR) MARK_AS_ADVANCED(FLTK2_FLUID_EXECUTABLE) SET( FLTK_FLUID_EXECUTABLE ${FLTK2_FLUID_EXECUTABLE} ) - + SET(FLTK2_INCLUDE_DIR ${FLTK2_DIR}) @@ -201,7 +201,7 @@ IF(FLTK2_DIR) FIND_LIBRARY(FLTK2_BASE_LIBRARY NAMES fltk2 PATHS ${FLTK2_LIBRARY_SEARCH_PATH}) - FIND_LIBRARY(FLTK2_GL_LIBRARY NAMES fltk2_gl + FIND_LIBRARY(FLTK2_GL_LIBRARY NAMES fltk2_gl PATHS ${FLTK2_LIBRARY_SEARCH_PATH}) FIND_LIBRARY(FLTK2_IMAGES_LIBRARY NAMES fltk2_images PATHS ${FLTK2_LIBRARY_SEARCH_PATH}) diff --git a/Modules/FindGDAL.cmake b/Modules/FindGDAL.cmake index c31bef5..3b42a33 100644 --- a/Modules/FindGDAL.cmake +++ b/Modules/FindGDAL.cmake @@ -28,12 +28,12 @@ # correspond to the ./configure --prefix=$GDAL_DIR # used in building gdal. # -# Created by Eric Wing. I'm not a gdal user, but OpenSceneGraph uses it +# Created by Eric Wing. I'm not a gdal user, but OpenSceneGraph uses it # for osgTerrain so I whipped this module together for completeness. # I actually don't know the conventions or where files are typically # placed in distros. # Any real gdal users are encouraged to correct this (but please don't -# break the OS X framework stuff when doing so which is what usually seems +# break the OS X framework stuff when doing so which is what usually seems # to happen). # This makes the presumption that you are include gdal.h like @@ -85,7 +85,7 @@ IF(UNIX) endif() endif() -FIND_LIBRARY(GDAL_LIBRARY +FIND_LIBRARY(GDAL_LIBRARY NAMES ${_gdal_lib} gdal gdal_i gdal1.5.0 gdal1.4.0 gdal1.3.2 GDAL HINTS $ENV{GDAL_DIR} diff --git a/Modules/FindGLUT.cmake b/Modules/FindGLUT.cmake index 8205779..cfa1375 100644 --- a/Modules/FindGLUT.cmake +++ b/Modules/FindGLUT.cmake @@ -21,7 +21,7 @@ # License text for the above reference.) IF (WIN32) - FIND_PATH( GLUT_INCLUDE_DIR NAMES GL/glut.h + FIND_PATH( GLUT_INCLUDE_DIR NAMES GL/glut.h PATHS ${GLUT_ROOT_PATH}/include ) FIND_LIBRARY( GLUT_glut_LIBRARY NAMES glut glut32 freeglut PATHS @@ -29,17 +29,17 @@ IF (WIN32) ${GLUT_ROOT_PATH}/Release ) ELSE (WIN32) - + IF (APPLE) # These values for Apple could probably do with improvement. FIND_PATH( GLUT_INCLUDE_DIR glut.h /System/Library/Frameworks/GLUT.framework/Versions/A/Headers ${OPENGL_LIBRARY_DIR} ) - SET(GLUT_glut_LIBRARY "-framework GLUT" CACHE STRING "GLUT library for OSX") + SET(GLUT_glut_LIBRARY "-framework GLUT" CACHE STRING "GLUT library for OSX") SET(GLUT_cocoa_LIBRARY "-framework Cocoa" CACHE STRING "Cocoa framework for OSX") ELSE (APPLE) - + FIND_PATH( GLUT_INCLUDE_DIR GL/glut.h /usr/include/GL /usr/openwin/share/include @@ -47,21 +47,21 @@ ELSE (WIN32) /opt/graphics/OpenGL/include /opt/graphics/OpenGL/contrib/libglut ) - + FIND_LIBRARY( GLUT_glut_LIBRARY glut /usr/openwin/lib ) - + FIND_LIBRARY( GLUT_Xi_LIBRARY Xi /usr/openwin/lib ) - + FIND_LIBRARY( GLUT_Xmu_LIBRARY Xmu /usr/openwin/lib ) - + ENDIF (APPLE) - + ENDIF (WIN32) INCLUDE(${CMAKE_CURRENT_LIST_DIR}/FindPackageHandleStandardArgs.cmake) @@ -76,7 +76,7 @@ IF (GLUT_FOUND) ${GLUT_Xi_LIBRARY} ${GLUT_cocoa_LIBRARY} ) - + #The following deprecated settings are for backwards compatibility with CMake1.4 SET (GLUT_LIBRARY ${GLUT_LIBRARIES}) SET (GLUT_INCLUDE_PATH ${GLUT_INCLUDE_DIR}) diff --git a/Modules/FindGTK.cmake b/Modules/FindGTK.cmake index e9cc62f..3fa75a6 100644 --- a/Modules/FindGTK.cmake +++ b/Modules/FindGTK.cmake @@ -89,11 +89,11 @@ IF(UNIX) /opt/gnome/lib ) - FIND_LIBRARY( GTK_Xi_LIBRARY - NAMES Xi - PATHS /usr/openwin/lib - /opt/gnome/lib - ) + FIND_LIBRARY( GTK_Xi_LIBRARY + NAMES Xi + PATHS /usr/openwin/lib + /opt/gnome/lib + ) FIND_LIBRARY( GTK_gthread_LIBRARY NAMES gthread gthread12 diff --git a/Modules/FindGTK2.cmake b/Modules/FindGTK2.cmake index 5fe5213..f734b3b 100644 --- a/Modules/FindGTK2.cmake +++ b/Modules/FindGTK2.cmake @@ -119,7 +119,7 @@ function(_GTK2_GET_VERSION _OUT_major _OUT_minor _OUT_micro _gtkversion_hdr) string(REGEX REPLACE ".*#define GTK_MAJOR_VERSION[ \t]+\\(([0-9]+)\\).*" "\\1" ${_OUT_major} "${_contents}") string(REGEX REPLACE ".*#define GTK_MINOR_VERSION[ \t]+\\(([0-9]+)\\).*" "\\1" ${_OUT_minor} "${_contents}") string(REGEX REPLACE ".*#define GTK_MICRO_VERSION[ \t]+\\(([0-9]+)\\).*" "\\1" ${_OUT_micro} "${_contents}") - + if(NOT ${_OUT_major} MATCHES "[0-9]+") message(FATAL_ERROR "Version parsing failed for GTK2_MAJOR_VERSION!") endif() @@ -269,7 +269,7 @@ function(_GTK2_FIND_LIBRARY _var _lib _expand_vc _append_version) set(_lib_list ${_library}) set(_libd_list ${_library_d}) endif() - + if(GTK2_DEBUG) message(STATUS "[FindGTK2.cmake:${CMAKE_CURRENT_LIST_LINE}] " "library list = ${_lib_list} and library debug list = ${_libd_list}") @@ -301,7 +301,7 @@ function(_GTK2_FIND_LIBRARY _var _lib _expand_vc _append_version) "While searching for ${_var}, our proposed library list is ${_lib_list}") endif() - find_library(${_var} + find_library(${_var} NAMES ${_lib_list} PATHS /opt/gnome/lib @@ -403,8 +403,8 @@ if(GTK2_FIND_VERSION) else() message(FATAL_ERROR "GTK2 version check failed. Version ${GTK2_VERSION} was found, at least version ${GTK2_FIND_VERSION} is required") endif() - endif() - + endif() + # If the version check fails, exit out of the module here return() endif() @@ -423,7 +423,7 @@ foreach(_GTK2_component ${GTK2_FIND_COMPONENTS}) _GTK2_FIND_INCLUDE_DIR(GTK2_GLIB_INCLUDE_DIR glib.h) _GTK2_FIND_INCLUDE_DIR(GTK2_GLIBCONFIG_INCLUDE_DIR glibconfig.h) _GTK2_FIND_LIBRARY (GTK2_GLIB_LIBRARY glib false true) - + _GTK2_FIND_INCLUDE_DIR(GTK2_GOBJECT_INCLUDE_DIR gobject/gobject.h) _GTK2_FIND_LIBRARY (GTK2_GOBJECT_LIBRARY gobject false true) @@ -490,7 +490,7 @@ foreach(_GTK2_component ${GTK2_FIND_COMPONENTS}) _GTK2_FIND_INCLUDE_DIR(GTK2_GLADE_INCLUDE_DIR glade/glade.h) _GTK2_FIND_LIBRARY (GTK2_GLADE_LIBRARY glade false true) - + elseif(_GTK2_component STREQUAL "glademm") _GTK2_FIND_INCLUDE_DIR(GTK2_GLADEMM_INCLUDE_DIR libglademm.h) diff --git a/Modules/FindGnuTLS.cmake b/Modules/FindGnuTLS.cmake index 02f2964..617f58f 100644 --- a/Modules/FindGnuTLS.cmake +++ b/Modules/FindGnuTLS.cmake @@ -55,7 +55,7 @@ FIND_LIBRARY(GNUTLS_LIBRARY NAMES gnutls libgnutls MARK_AS_ADVANCED(GNUTLS_INCLUDE_DIR GNUTLS_LIBRARY) -# handle the QUIETLY and REQUIRED arguments and set GNUTLS_FOUND to TRUE if +# handle the QUIETLY and REQUIRED arguments and set GNUTLS_FOUND to TRUE if # all listed variables are TRUE INCLUDE(${CMAKE_CURRENT_LIST_DIR}/FindPackageHandleStandardArgs.cmake) FIND_PACKAGE_HANDLE_STANDARD_ARGS(GnuTLS diff --git a/Modules/FindGnuplot.cmake b/Modules/FindGnuplot.cmake index b8dc3f4..d573047 100644 --- a/Modules/FindGnuplot.cmake +++ b/Modules/FindGnuplot.cmake @@ -24,7 +24,7 @@ INCLUDE(FindCygwin) FIND_PROGRAM(GNUPLOT_EXECUTABLE - NAMES + NAMES gnuplot pgnuplot wgnupl32 @@ -46,7 +46,7 @@ ENDIF() # for compatibility SET(GNUPLOT ${GNUPLOT_EXECUTABLE}) -# handle the QUIETLY and REQUIRED arguments and set GNUPLOT_FOUND to TRUE if +# handle the QUIETLY and REQUIRED arguments and set GNUPLOT_FOUND to TRUE if # all listed variables are TRUE INCLUDE(${CMAKE_CURRENT_LIST_DIR}/FindPackageHandleStandardArgs.cmake) FIND_PACKAGE_HANDLE_STANDARD_ARGS(Gnuplot diff --git a/Modules/FindHDF5.cmake b/Modules/FindHDF5.cmake index bc60638..33599be 100644 --- a/Modules/FindHDF5.cmake +++ b/Modules/FindHDF5.cmake @@ -25,7 +25,7 @@ # In addition to finding the includes and libraries required to compile an HDF5 # client application, this module also makes an effort to find tools that come # with the HDF5 distribution that may be useful for regression testing. -# +# # This module will define the following variables: # HDF5_INCLUDE_DIRS - Location of the hdf5 includes # HDF5_INCLUDE_DIR - Location of the hdf5 includes (deprecated) @@ -64,7 +64,7 @@ include(SelectLibraryConfigurations) include(${CMAKE_CURRENT_LIST_DIR}/FindPackageHandleStandardArgs.cmake) # List of the valid HDF5 components -set( HDF5_VALID_COMPONENTS +set( HDF5_VALID_COMPONENTS C CXX Fortran @@ -110,10 +110,10 @@ find_program( HDF5_Fortran_COMPILER_EXECUTABLE DOC "HDF5 Fortran Wrapper compiler. Used only to detect HDF5 compile flags." ) mark_as_advanced( HDF5_Fortran_COMPILER_EXECUTABLE ) -find_program( HDF5_DIFF_EXECUTABLE +find_program( HDF5_DIFF_EXECUTABLE NAMES h5diff HINTS ENV HDF5_ROOT - PATH_SUFFIXES bin Bin + PATH_SUFFIXES bin Bin DOC "HDF5 file differencing tool." ) mark_as_advanced( HDF5_DIFF_EXECUTABLE ) @@ -121,7 +121,7 @@ mark_as_advanced( HDF5_DIFF_EXECUTABLE ) # return_value argument, the text output is stored to the output variable. macro( _HDF5_invoke_compiler language output return_value ) if( HDF5_${language}_COMPILER_EXECUTABLE ) - exec_program( ${HDF5_${language}_COMPILER_EXECUTABLE} + exec_program( ${HDF5_${language}_COMPILER_EXECUTABLE} ARGS -show OUTPUT_VARIABLE ${output} RETURN_VALUE ${return_value} @@ -129,14 +129,14 @@ macro( _HDF5_invoke_compiler language output return_value ) if( ${${return_value}} EQUAL 0 ) # do nothing else() - message( STATUS + message( STATUS "Unable to determine HDF5 ${language} flags from HDF5 wrapper." ) endif() endif() endmacro() # Parse a compile line for definitions, includes, library paths, and libraries. -macro( _HDF5_parse_compile_line +macro( _HDF5_parse_compile_line compile_line_var include_paths definitions @@ -144,7 +144,7 @@ macro( _HDF5_parse_compile_line libraries ) # Match the include paths - string( REGEX MATCHALL "-I([^\" ]+)" include_path_flags + string( REGEX MATCHALL "-I([^\" ]+)" include_path_flags "${${compile_line_var}}" ) foreach( IPATH ${include_path_flags} ) @@ -163,7 +163,7 @@ macro( _HDF5_parse_compile_line string( REGEX MATCHALL "-L([^\" ]+|\"[^\"]+\")" library_path_flags "${${compile_line_var}}" ) - + foreach( LPATH ${library_path_flags} ) string( REGEX REPLACE "^-L" "" LPATH ${LPATH} ) string( REGEX REPLACE "//" "/" LPATH ${LPATH} ) @@ -219,7 +219,7 @@ if( NOT HDF5_FOUND ) ${HDF5_C_LIBRARY_NAMES_INIT} ) set( HDF5_Fortran_HL_LIBRARY_NAMES_INIT hdf5hl_fortran ${HDF5_Fortran_LIBRARY_NAMES_INIT} ) - + foreach( LANGUAGE ${HDF5_LANGUAGE_BINDINGS} ) if( HDF5_${LANGUAGE}_COMPILE_LINE ) _HDF5_parse_compile_line( HDF5_${LANGUAGE}_COMPILE_LINE @@ -228,7 +228,7 @@ if( NOT HDF5_FOUND ) HDF5_${LANGUAGE}_LIBRARY_DIRS HDF5_${LANGUAGE}_LIBRARY_NAMES ) - + # take a guess that the includes may be in the 'include' sibling # directory of a library directory. foreach( dir ${HDF5_${LANGUAGE}_LIBRARY_DIRS} ) @@ -238,7 +238,7 @@ if( NOT HDF5_FOUND ) # set the definitions for the language bindings. list( APPEND HDF5_DEFINITIONS ${HDF5_${LANGUAGE}_DEFINITIONS} ) - + # find the HDF5 include directories if(${LANGUAGE} MATCHES "Fortran.*") set(HDF5_INCLUDE_FILENAME hdf5.mod) @@ -251,7 +251,7 @@ if( NOT HDF5_FOUND ) ${HDF5_${LANGUAGE}_INCLUDE_FLAGS} ENV HDF5_ROOT - PATHS + PATHS $ENV{HOME}/.local/include PATH_SUFFIXES include @@ -259,11 +259,11 @@ if( NOT HDF5_FOUND ) ) mark_as_advanced( HDF5_${LANGUAGE}_INCLUDE_DIR ) list( APPEND HDF5_INCLUDE_DIRS ${HDF5_${LANGUAGE}_INCLUDE_DIR} ) - - set( HDF5_${LANGUAGE}_LIBRARY_NAMES - ${HDF5_${LANGUAGE}_LIBRARY_NAMES_INIT} + + set( HDF5_${LANGUAGE}_LIBRARY_NAMES + ${HDF5_${LANGUAGE}_LIBRARY_NAMES_INIT} ${HDF5_${LANGUAGE}_LIBRARY_NAMES} ) - + # find the HDF5 libraries foreach( LIB ${HDF5_${LANGUAGE}_LIBRARY_NAMES} ) if( UNIX AND HDF5_USE_STATIC_LIBRARIES ) @@ -278,15 +278,15 @@ if( NOT HDF5_FOUND ) set( THIS_LIBRARY_SEARCH_DEBUG ${LIB}d ) set( THIS_LIBRARY_SEARCH_RELEASE ${LIB} ) endif() - find_library( HDF5_${LIB}_LIBRARY_DEBUG - NAMES ${THIS_LIBRARY_SEARCH_DEBUG} - HINTS ${HDF5_${LANGUAGE}_LIBRARY_DIRS} - ENV HDF5_ROOT + find_library( HDF5_${LIB}_LIBRARY_DEBUG + NAMES ${THIS_LIBRARY_SEARCH_DEBUG} + HINTS ${HDF5_${LANGUAGE}_LIBRARY_DIRS} + ENV HDF5_ROOT PATH_SUFFIXES lib Lib ) find_library( HDF5_${LIB}_LIBRARY_RELEASE - NAMES ${THIS_LIBRARY_SEARCH_RELEASE} - HINTS ${HDF5_${LANGUAGE}_LIBRARY_DIRS} - ENV HDF5_ROOT + NAMES ${THIS_LIBRARY_SEARCH_RELEASE} + HINTS ${HDF5_${LANGUAGE}_LIBRARY_DIRS} + ENV HDF5_ROOT PATH_SUFFIXES lib Lib ) select_library_configurations( HDF5_${LIB} ) # even though we adjusted the individual library names in @@ -297,16 +297,16 @@ if( NOT HDF5_FOUND ) # up by the selection macro above) because it may specify debug and # optimized variants for a particular library, but a list of # libraries is allowed to specify debug and optimized only once. - list( APPEND HDF5_${LANGUAGE}_LIBRARIES_DEBUG + list( APPEND HDF5_${LANGUAGE}_LIBRARIES_DEBUG ${HDF5_${LIB}_LIBRARY_DEBUG} ) - list( APPEND HDF5_${LANGUAGE}_LIBRARIES_RELEASE + list( APPEND HDF5_${LANGUAGE}_LIBRARIES_RELEASE ${HDF5_${LIB}_LIBRARY_RELEASE} ) endforeach() list( APPEND HDF5_LIBRARY_DIRS ${HDF5_${LANGUAGE}_LIBRARY_DIRS} ) - + # Append the libraries for this language binding to the list of all # required libraries. - list( APPEND HDF5_LIBRARIES_DEBUG + list( APPEND HDF5_LIBRARIES_DEBUG ${HDF5_${LANGUAGE}_LIBRARIES_DEBUG} ) list( APPEND HDF5_LIBRARIES_RELEASE ${HDF5_${LANGUAGE}_LIBRARIES_RELEASE} ) @@ -358,7 +358,7 @@ if( NOT HDF5_FOUND ) set( HDF5_IS_PARALLEL FALSE ) foreach( _dir IN LISTS HDF5_INCLUDE_DIRS ) if( EXISTS "${_dir}/H5pubconf.h" ) - file( STRINGS "${_dir}/H5pubconf.h" + file( STRINGS "${_dir}/H5pubconf.h" HDF5_HAVE_PARALLEL_DEFINE REGEX "HAVE_PARALLEL 1" ) if( HDF5_HAVE_PARALLEL_DEFINE ) @@ -378,8 +378,8 @@ if( NOT HDF5_FOUND ) endif() -find_package_handle_standard_args( HDF5 DEFAULT_MSG - HDF5_LIBRARIES +find_package_handle_standard_args( HDF5 DEFAULT_MSG + HDF5_LIBRARIES HDF5_INCLUDE_DIRS ) diff --git a/Modules/FindHSPELL.cmake b/Modules/FindHSPELL.cmake index ca5709b..79bfc81 100644 --- a/Modules/FindHSPELL.cmake +++ b/Modules/FindHSPELL.cmake @@ -35,7 +35,7 @@ IF (HSPELL_INCLUDE_DIR) SET(HSPELL_VERSION_STRING "${HSPELL_VERSION_MAJOR}.${HSPELL_VERSION_MINOR}") ENDIF() -# handle the QUIETLY and REQUIRED arguments and set HSPELL_FOUND to TRUE if +# handle the QUIETLY and REQUIRED arguments and set HSPELL_FOUND to TRUE if # all listed variables are TRUE INCLUDE(${CMAKE_CURRENT_LIST_DIR}/FindPackageHandleStandardArgs.cmake) FIND_PACKAGE_HANDLE_STANDARD_ARGS(HSPELL diff --git a/Modules/FindHTMLHelp.cmake b/Modules/FindHTMLHelp.cmake index 4455b07..00de82a 100644 --- a/Modules/FindHTMLHelp.cmake +++ b/Modules/FindHTMLHelp.cmake @@ -24,20 +24,20 @@ IF(WIN32) hhc "[HKEY_CURRENT_USER\\Software\\Microsoft\\HTML Help Workshop;InstallDir]" "$ENV{ProgramFiles}/HTML Help Workshop" - "C:/Program Files/HTML Help Workshop" + "C:/Program Files/HTML Help Workshop" ) GET_FILENAME_COMPONENT(HTML_HELP_COMPILER_PATH "${HTML_HELP_COMPILER}" PATH) - FIND_PATH(HTML_HELP_INCLUDE_PATH - htmlhelp.h + FIND_PATH(HTML_HELP_INCLUDE_PATH + htmlhelp.h "${HTML_HELP_COMPILER_PATH}/include" "[HKEY_CURRENT_USER\\Software\\Microsoft\\HTML Help Workshop;InstallDir]/include" "$ENV{ProgramFiles}/HTML Help Workshop/include" - "C:/Program Files/HTML Help Workshop/include" + "C:/Program Files/HTML Help Workshop/include" ) - FIND_LIBRARY(HTML_HELP_LIBRARY + FIND_LIBRARY(HTML_HELP_LIBRARY htmlhelp "${HTML_HELP_COMPILER_PATH}/lib" "[HKEY_CURRENT_USER\\Software\\Microsoft\\HTML Help Workshop;InstallDir]/lib" diff --git a/Modules/FindITK.cmake b/Modules/FindITK.cmake index a3ca998..5b598d2 100644 --- a/Modules/FindITK.cmake +++ b/Modules/FindITK.cmake @@ -7,16 +7,16 @@ # that can be included to set the include directories, library directories, # and preprocessor macros. In addition to the variables read from # ITKConfig.cmake, this find module also defines -# ITK_DIR - The directory containing ITKConfig.cmake. -# This is either the root of the build tree, -# or the lib/InsightToolkit directory. +# ITK_DIR - The directory containing ITKConfig.cmake. +# This is either the root of the build tree, +# or the lib/InsightToolkit directory. # This is the only cache entry. -# -# ITK_FOUND - Whether ITK was found. If this is true, +# +# ITK_FOUND - Whether ITK was found. If this is true, # ITK_DIR is okay. # -# USE_ITK_FILE - The full path to the UseITK.cmake file. -# This is provided for backward +# USE_ITK_FILE - The full path to the UseITK.cmake file. +# This is provided for backward # compatability. Use ITK_USE_FILE # instead. diff --git a/Modules/FindJNI.cmake b/Modules/FindJNI.cmake index d49b44a..f93b454 100644 --- a/Modules/FindJNI.cmake +++ b/Modules/FindJNI.cmake @@ -2,7 +2,7 @@ # This module finds if Java is installed and determines where the # include files and libraries are. It also determines what the name of # the library is. This code sets the following variables: -# +# # JNI_INCLUDE_DIRS = the include dirs to use # JNI_LIBRARIES = the libraries to use # JNI_FOUND = TRUE if JNI headers and libraries were found. @@ -138,7 +138,7 @@ SET(JAVA_AWT_INCLUDE_DIRECTORIES "[HKEY_LOCAL_MACHINE\\SOFTWARE\\JavaSoft\\Java Development Kit\\1.3;JavaHome]/include" "[HKEY_LOCAL_MACHINE\\SOFTWARE\\JavaSoft\\Java Development Kit\\${java_install_version};JavaHome]/include" ${_JAVA_HOME}/include - /usr/include + /usr/include /usr/local/include /usr/lib/java/include /usr/local/lib/java/include @@ -162,9 +162,9 @@ FOREACH(JAVA_PROG "${JAVA_RUNTIME}" "${JAVA_COMPILE}" "${JAVA_ARCHIVE}") SET(JAVA_AWT_INCLUDE_DIRECTORIES ${JAVA_AWT_INCLUDE_DIRECTORIES} "${jpath}/${JAVA_INC_PATH}") ENDIF(EXISTS ${jpath}/${JAVA_INC_PATH}) ENDFOREACH(JAVA_INC_PATH) - FOREACH(JAVA_LIB_PATH - ../lib ../jre/lib ../jre/lib/i386 - ../java/lib ../java/jre/lib ../java/jre/lib/i386 + FOREACH(JAVA_LIB_PATH + ../lib ../jre/lib ../jre/lib/i386 + ../java/lib ../java/jre/lib ../java/jre/lib/i386 ../share/java/lib ../share/java/jre/lib ../share/java/jre/lib/i386) IF(EXISTS ${jpath}/${JAVA_LIB_PATH}) SET(JAVA_AWT_LIBRARY_DIRECTORIES ${JAVA_AWT_LIBRARY_DIRECTORIES} "${jpath}/${JAVA_LIB_PATH}") @@ -209,7 +209,7 @@ IF(APPLE) ) ENDIF(JAVA_HAVE_FRAMEWORK) ELSE(APPLE) - FIND_LIBRARY(JAVA_AWT_LIBRARY jawt + FIND_LIBRARY(JAVA_AWT_LIBRARY jawt PATHS ${JAVA_AWT_LIBRARY_DIRECTORIES} ) FIND_LIBRARY(JAVA_JVM_LIBRARY NAMES jvm JavaVM @@ -217,12 +217,12 @@ ELSE(APPLE) ) ENDIF(APPLE) -# add in the include path -FIND_PATH(JAVA_INCLUDE_PATH jni.h +# add in the include path +FIND_PATH(JAVA_INCLUDE_PATH jni.h ${JAVA_AWT_INCLUDE_DIRECTORIES} ) -FIND_PATH(JAVA_INCLUDE_PATH2 jni_md.h +FIND_PATH(JAVA_INCLUDE_PATH2 jni_md.h ${JAVA_INCLUDE_PATH} ${JAVA_INCLUDE_PATH}/win32 ${JAVA_INCLUDE_PATH}/linux diff --git a/Modules/FindJPEG.cmake b/Modules/FindJPEG.cmake index 349e7e1..0b5db40 100644 --- a/Modules/FindJPEG.cmake +++ b/Modules/FindJPEG.cmake @@ -25,7 +25,7 @@ FIND_PATH(JPEG_INCLUDE_DIR jpeglib.h) SET(JPEG_NAMES ${JPEG_NAMES} jpeg) FIND_LIBRARY(JPEG_LIBRARY NAMES ${JPEG_NAMES} ) -# handle the QUIETLY and REQUIRED arguments and set JPEG_FOUND to TRUE if +# handle the QUIETLY and REQUIRED arguments and set JPEG_FOUND to TRUE if # all listed variables are TRUE INCLUDE(${CMAKE_CURRENT_LIST_DIR}/FindPackageHandleStandardArgs.cmake) FIND_PACKAGE_HANDLE_STANDARD_ARGS(JPEG DEFAULT_MSG JPEG_LIBRARY JPEG_INCLUDE_DIR) diff --git a/Modules/FindJasper.cmake b/Modules/FindJasper.cmake index 6dc7e4d..b617844 100644 --- a/Modules/FindJasper.cmake +++ b/Modules/FindJasper.cmake @@ -39,7 +39,7 @@ IF (JASPER_INCLUDE_DIR AND EXISTS "${JASPER_INCLUDE_DIR}/jasper/jas_config.h") STRING(REGEX REPLACE "^#define[\t ]+JAS_VERSION[\t ]+\"([^\"]+)\".*" "\\1" JASPER_VERSION_STRING "${jasper_version_str}") ENDIF (JASPER_INCLUDE_DIR AND EXISTS "${JASPER_INCLUDE_DIR}/jasper/jas_config.h") -# handle the QUIETLY and REQUIRED arguments and set JASPER_FOUND to TRUE if +# handle the QUIETLY and REQUIRED arguments and set JASPER_FOUND to TRUE if # all listed variables are TRUE INCLUDE(${CMAKE_CURRENT_LIST_DIR}/FindPackageHandleStandardArgs.cmake) FIND_PACKAGE_HANDLE_STANDARD_ARGS(Jasper diff --git a/Modules/FindJava.cmake b/Modules/FindJava.cmake index 3457021..2e50eca 100644 --- a/Modules/FindJava.cmake +++ b/Modules/FindJava.cmake @@ -23,7 +23,7 @@ # Java_VERSION_STRING = 1.5.0_17 # and # Java_VERSION = 1.5.0.17 -# +# # another example is the Java OEM, with: # Java_VERSION_STRING = 1.6.0-oem # and @@ -102,7 +102,7 @@ IF(Java_JAVA_EXECUTABLE) ENDIF() ELSE() # extract major/minor version and patch level from "java -version" output - # Tested on linux using + # Tested on linux using # 1. Sun / Sun OEM # 2. OpenJDK 1.6 # 3. GCJ 1.5 diff --git a/Modules/FindKDE3.cmake b/Modules/FindKDE3.cmake index ca3dae6..65a559f 100644 --- a/Modules/FindKDE3.cmake +++ b/Modules/FindKDE3.cmake @@ -101,7 +101,7 @@ SET(QT_MT_REQUIRED TRUE) IF(KDE3_FIND_REQUIRED) SET(_REQ_STRING_KDE3 "REQUIRED") ENDIF(KDE3_FIND_REQUIRED) - + FIND_PACKAGE(Qt3 ${_REQ_STRING_KDE3}) FIND_PACKAGE(X11 ${_REQ_STRING_KDE3}) diff --git a/Modules/FindKDE4.cmake b/Modules/FindKDE4.cmake index ed4f270..fb93328 100644 --- a/Modules/FindKDE4.cmake +++ b/Modules/FindKDE4.cmake @@ -38,14 +38,14 @@ ENDIF(QT_QT_LIBRARY) FILE(TO_CMAKE_PATH "$ENV{KDEDIRS}" _KDEDIRS) # when cross compiling, searching kde4-config in order to run it later on -# doesn't make a lot of sense. We'll have to do something about this. +# doesn't make a lot of sense. We'll have to do something about this. # Searching always in the target environment ? Then we get at least the correct one, # still it can't be used to run it. Alex # For KDE4 kde-config has been renamed to kde4-config FIND_PROGRAM(KDE4_KDECONFIG_EXECUTABLE NAMES kde4-config # the suffix must be used since KDEDIRS can be a list of directories which don't have bin/ appended - PATH_SUFFIXES bin + PATH_SUFFIXES bin HINTS ${CMAKE_INSTALL_PREFIX} ${_KDEDIRS} diff --git a/Modules/FindLATEX.cmake b/Modules/FindLATEX.cmake index 950daca..7997ae9 100644 --- a/Modules/FindLATEX.cmake +++ b/Modules/FindLATEX.cmake @@ -1,14 +1,14 @@ # - Find Latex # This module finds if Latex is installed and determines where the # executables are. This code sets the following variables: -# +# # LATEX_COMPILER: path to the LaTeX compiler # PDFLATEX_COMPILER: path to the PdfLaTeX compiler # BIBTEX_COMPILER: path to the BibTeX compiler # MAKEINDEX_COMPILER: path to the MakeIndex compiler # DVIPS_CONVERTER: path to the DVIPS converter # PS2PDF_CONVERTER: path to the PS2PDF converter -# LATEX2HTML_CONVERTER: path to the LaTeX2Html converter +# LATEX2HTML_CONVERTER: path to the LaTeX2Html converter # #============================================================================= @@ -30,7 +30,7 @@ IF (WIN32) FIND_PATH(MIKTEX_BINARY_PATH mpm.exe "[HKEY_LOCAL_MACHINE\\SOFTWARE\\MiK\\MiKTeX\\CurrentVersion\\MiKTeX;Install Root]/miktex/bin" - DOC + DOC "Path to the MikTex binary directory." ) MARK_AS_ADVANCED(MIKTEX_BINARY_PATH) diff --git a/Modules/FindLibXml2.cmake b/Modules/FindLibXml2.cmake index 48a5498..4fc5d88 100644 --- a/Modules/FindLibXml2.cmake +++ b/Modules/FindLibXml2.cmake @@ -56,7 +56,7 @@ ELSEIF(LIBXML2_INCLUDE_DIR AND EXISTS "${LIBXML2_INCLUDE_DIR}/libxml/xmlversion. UNSET(libxml2_version_str) ENDIF() -# handle the QUIETLY and REQUIRED arguments and set LIBXML2_FOUND to TRUE if +# handle the QUIETLY and REQUIRED arguments and set LIBXML2_FOUND to TRUE if # all listed variables are TRUE INCLUDE(${CMAKE_CURRENT_LIST_DIR}/FindPackageHandleStandardArgs.cmake) FIND_PACKAGE_HANDLE_STANDARD_ARGS(LibXml2 diff --git a/Modules/FindLua50.cmake b/Modules/FindLua50.cmake index 9a5cc17..5196cf7 100644 --- a/Modules/FindLua50.cmake +++ b/Modules/FindLua50.cmake @@ -1,6 +1,6 @@ # Locate Lua library # This module defines -# LUA50_FOUND, if false, do not try to link to Lua +# LUA50_FOUND, if false, do not try to link to Lua # LUA_LIBRARIES, both lua and lualib # LUA_INCLUDE_DIR, where to find lua.h and lualib.h (and probably lauxlib.h) # @@ -37,7 +37,7 @@ FIND_PATH(LUA_INCLUDE_DIR lua.h /opt ) -FIND_LIBRARY(LUA_LIBRARY_lua +FIND_LIBRARY(LUA_LIBRARY_lua NAMES lua50 lua5.0 lua-5.0 lua5 lua HINTS $ENV{LUA_DIR} @@ -56,7 +56,7 @@ FIND_LIBRARY(LUA_LIBRARY_lua IF(${LUA_LIBRARY_lua} MATCHES "framework") SET( LUA_LIBRARIES "${LUA_LIBRARY_lua}" CACHE STRING "Lua framework") ELSE(${LUA_LIBRARY_lua} MATCHES "framework") - FIND_LIBRARY(LUA_LIBRARY_lualib + FIND_LIBRARY(LUA_LIBRARY_lualib NAMES lualib50 lualib5.0 lualib5 lualib HINTS $ENV{LUALIB_DIR} @@ -82,7 +82,7 @@ ENDIF(${LUA_LIBRARY_lua} MATCHES "framework") INCLUDE(${CMAKE_CURRENT_LIST_DIR}/FindPackageHandleStandardArgs.cmake) -# handle the QUIETLY and REQUIRED arguments and set LUA_FOUND to TRUE if +# handle the QUIETLY and REQUIRED arguments and set LUA_FOUND to TRUE if # all listed variables are TRUE FIND_PACKAGE_HANDLE_STANDARD_ARGS(Lua50 DEFAULT_MSG LUA_LIBRARIES LUA_INCLUDE_DIR) diff --git a/Modules/FindLua51.cmake b/Modules/FindLua51.cmake index e111d36..468b5d4 100644 --- a/Modules/FindLua51.cmake +++ b/Modules/FindLua51.cmake @@ -1,6 +1,6 @@ # Locate Lua library # This module defines -# LUA51_FOUND, if false, do not try to link to Lua +# LUA51_FOUND, if false, do not try to link to Lua # LUA_LIBRARIES # LUA_INCLUDE_DIR, where to find lua.h # LUA_VERSION_STRING, the version of Lua found (since CMake 2.8.8) @@ -38,7 +38,7 @@ FIND_PATH(LUA_INCLUDE_DIR lua.h /opt ) -FIND_LIBRARY(LUA_LIBRARY +FIND_LIBRARY(LUA_LIBRARY NAMES lua51 lua5.1 lua-5.1 lua HINTS $ENV{LUA_DIR} @@ -71,7 +71,7 @@ IF(LUA_INCLUDE_DIR AND EXISTS "${LUA_INCLUDE_DIR}/lua.h") ENDIF() INCLUDE(${CMAKE_CURRENT_LIST_DIR}/FindPackageHandleStandardArgs.cmake) -# handle the QUIETLY and REQUIRED arguments and set LUA_FOUND to TRUE if +# handle the QUIETLY and REQUIRED arguments and set LUA_FOUND to TRUE if # all listed variables are TRUE FIND_PACKAGE_HANDLE_STANDARD_ARGS(Lua51 REQUIRED_VARS LUA_LIBRARIES LUA_INCLUDE_DIR diff --git a/Modules/FindMPEG.cmake b/Modules/FindMPEG.cmake index cf4ef58..545e049 100644 --- a/Modules/FindMPEG.cmake +++ b/Modules/FindMPEG.cmake @@ -32,7 +32,7 @@ FIND_LIBRARY( MPEG_vo_LIBRARY vo /usr/local/livid/mpeg2dec/libvo/.libs ) -# handle the QUIETLY and REQUIRED arguments and set MPEG2_FOUND to TRUE if +# handle the QUIETLY and REQUIRED arguments and set MPEG2_FOUND to TRUE if # all listed variables are TRUE INCLUDE(${CMAKE_CURRENT_LIST_DIR}/FindPackageHandleStandardArgs.cmake) FIND_PACKAGE_HANDLE_STANDARD_ARGS(MPEG DEFAULT_MSG MPEG_INCLUDE_DIR MPEG_mpeg2_LIBRARY MPEG_vo_LIBRARY) diff --git a/Modules/FindMPEG2.cmake b/Modules/FindMPEG2.cmake index fab37cf..5456e20 100644 --- a/Modules/FindMPEG2.cmake +++ b/Modules/FindMPEG2.cmake @@ -20,7 +20,7 @@ # (To distribute this file outside of CMake, substitute the full # License text for the above reference.) -FIND_PATH(MPEG2_INCLUDE_DIR +FIND_PATH(MPEG2_INCLUDE_DIR NAMES mpeg2.h mpeg2dec/mpeg2.h PATHS /usr/local/livid ) @@ -34,13 +34,13 @@ FIND_LIBRARY( MPEG2_vo_LIBRARY vo ) -# handle the QUIETLY and REQUIRED arguments and set MPEG2_FOUND to TRUE if +# handle the QUIETLY and REQUIRED arguments and set MPEG2_FOUND to TRUE if # all listed variables are TRUE INCLUDE(${CMAKE_CURRENT_LIST_DIR}/FindPackageHandleStandardArgs.cmake) FIND_PACKAGE_HANDLE_STANDARD_ARGS(MPEG2 DEFAULT_MSG MPEG2_mpeg2_LIBRARY MPEG2_INCLUDE_DIR) IF(MPEG2_FOUND) - SET( MPEG2_LIBRARIES ${MPEG2_mpeg2_LIBRARY} + SET( MPEG2_LIBRARIES ${MPEG2_mpeg2_LIBRARY} ${MPEG2_vo_LIBRARY}) #some native mpeg2 installations will depend diff --git a/Modules/FindMotif.cmake b/Modules/FindMotif.cmake index e354112..57da1c1 100644 --- a/Modules/FindMotif.cmake +++ b/Modules/FindMotif.cmake @@ -32,7 +32,7 @@ IF(UNIX) ENDIF(UNIX) -# handle the QUIETLY and REQUIRED arguments and set MOTIF_FOUND to TRUE if +# handle the QUIETLY and REQUIRED arguments and set MOTIF_FOUND to TRUE if # all listed variables are TRUE INCLUDE(${CMAKE_CURRENT_LIST_DIR}/FindPackageHandleStandardArgs.cmake) FIND_PACKAGE_HANDLE_STANDARD_ARGS(Motif DEFAULT_MSG MOTIF_LIBRARIES MOTIF_INCLUDE_DIR) diff --git a/Modules/FindOpenAL.cmake b/Modules/FindOpenAL.cmake index cb3ce48..fdac455 100644 --- a/Modules/FindOpenAL.cmake +++ b/Modules/FindOpenAL.cmake @@ -1,7 +1,7 @@ # Locate OpenAL # This module defines # OPENAL_LIBRARY -# OPENAL_FOUND, if false, do not try to link to OpenAL +# OPENAL_FOUND, if false, do not try to link to OpenAL # OPENAL_INCLUDE_DIR, where to find the headers # # $OPENALDIR is an environment variable that would @@ -25,31 +25,31 @@ # This makes the presumption that you are include al.h like # #include "al.h" -# and not +# and not # #include <AL/al.h> # The reason for this is that the latter is not entirely portable. -# Windows/Creative Labs does not by default put their headers in AL/ and +# Windows/Creative Labs does not by default put their headers in AL/ and # OS X uses the convention <OpenAL/al.h>. -# -# For Windows, Creative Labs seems to have added a registry key for their +# +# For Windows, Creative Labs seems to have added a registry key for their # OpenAL 1.1 installer. I have added that key to the list of search paths, -# however, the key looks like it could be a little fragile depending on +# however, the key looks like it could be a little fragile depending on # if they decide to change the 1.00.0000 number for bug fix releases. # Also, they seem to have laid down groundwork for multiple library platforms # which puts the library in an extra subdirectory. Currently there is only -# Win32 and I have hardcoded that here. This may need to be adjusted as +# Win32 and I have hardcoded that here. This may need to be adjusted as # platforms are introduced. # The OpenAL 1.0 installer doesn't seem to have a useful key I can use. # I do not know if the Nvidia OpenAL SDK has a registry key. -# -# For OS X, remember that OpenAL was added by Apple in 10.4 (Tiger). -# To support the framework, I originally wrote special framework detection +# +# For OS X, remember that OpenAL was added by Apple in 10.4 (Tiger). +# To support the framework, I originally wrote special framework detection # code in this module which I have now removed with CMake's introduction # of native support for frameworks. -# In addition, OpenAL is open source, and it is possible to compile on Panther. -# Furthermore, due to bugs in the initial OpenAL release, and the +# In addition, OpenAL is open source, and it is possible to compile on Panther. +# Furthermore, due to bugs in the initial OpenAL release, and the # transition to OpenAL 1.1, it is common to need to override the built-in -# framework. +# framework. # Per my request, CMake should search for frameworks first in # the following order: # ~/Library/Frameworks/OpenAL.framework/Headers @@ -57,7 +57,7 @@ # /System/Library/Frameworks/OpenAL.framework/Headers # # On OS X, this will prefer the Framework version (if found) over others. -# People will have to manually change the cache values of +# People will have to manually change the cache values of # OPENAL_LIBRARY to override this selection or set the CMake environment # CMAKE_INCLUDE_PATH to modify the search paths. @@ -75,7 +75,7 @@ FIND_PATH(OPENAL_INCLUDE_DIR al.h [HKEY_LOCAL_MACHINE\\SOFTWARE\\Creative\ Labs\\OpenAL\ 1.1\ Software\ Development\ Kit\\1.00.0000;InstallDir] ) -FIND_LIBRARY(OPENAL_LIBRARY +FIND_LIBRARY(OPENAL_LIBRARY NAMES OpenAL al openal OpenAL32 HINTS $ENV{OPENALDIR} diff --git a/Modules/FindOpenGL.cmake b/Modules/FindOpenGL.cmake index 98d8808..322972a 100644 --- a/Modules/FindOpenGL.cmake +++ b/Modules/FindOpenGL.cmake @@ -1,18 +1,18 @@ # - Try to find OpenGL # Once done this will define -# +# # OPENGL_FOUND - system has OpenGL # OPENGL_XMESA_FOUND - system has XMESA # OPENGL_GLU_FOUND - system has GLU # OPENGL_INCLUDE_DIR - the GL include directory # OPENGL_LIBRARIES - Link these to use OpenGL and GLU -# +# # If you want to use just GL you can use these values # OPENGL_gl_LIBRARY - Path to OpenGL Library # OPENGL_glu_LIBRARY - Path to GLU Library -# +# # On OSX default to using the framework version of opengl -# People will have to change the cache values of OPENGL_glu_LIBRARY +# People will have to change the cache values of OPENGL_glu_LIBRARY # and OPENGL_gl_LIBRARY to use OpenGL with X11 on OSX #============================================================================= @@ -63,7 +63,7 @@ ELSE (WIN32) IF(CMAKE_SIZEOF_VOID_P EQUAL 4) SET(HPUX_IA_OPENGL_LIB_PATH /opt/graphics/OpenGL/lib/hpux32/) ELSE(CMAKE_SIZEOF_VOID_P EQUAL 4) - SET(HPUX_IA_OPENGL_LIB_PATH + SET(HPUX_IA_OPENGL_LIB_PATH /opt/graphics/OpenGL/lib/hpux64/ /opt/graphics/OpenGL/lib/pa20_64) ENDIF(CMAKE_SIZEOF_VOID_P EQUAL 4) @@ -97,7 +97,7 @@ ELSE (WIN32) ) # On Unix OpenGL most certainly always requires X11. - # Feel free to tighten up these conditions if you don't + # Feel free to tighten up these conditions if you don't # think this is always true. # It's not true on OSX. diff --git a/Modules/FindOpenMP.cmake b/Modules/FindOpenMP.cmake index b96a2ec..87c9d03 100644 --- a/Modules/FindOpenMP.cmake +++ b/Modules/FindOpenMP.cmake @@ -75,12 +75,12 @@ function(_OPENMP_FLAG_CANDIDATES LANG) endfunction(_OPENMP_FLAG_CANDIDATES) # sample openmp source code to test -set(OpenMP_C_TEST_SOURCE +set(OpenMP_C_TEST_SOURCE " #include <omp.h> -int main() { +int main() { #ifdef _OPENMP - return 0; + return 0; #else breaks_on_purpose #endif diff --git a/Modules/FindOpenSceneGraph.cmake b/Modules/FindOpenSceneGraph.cmake index 52f9316..9dd2c28 100644 --- a/Modules/FindOpenSceneGraph.cmake +++ b/Modules/FindOpenSceneGraph.cmake @@ -14,7 +14,7 @@ # # OpenSceneGraph_DEBUG - Enable debugging output # -# OpenSceneGraph_MARK_AS_ADVANCED - Mark cache variables as advanced +# OpenSceneGraph_MARK_AS_ADVANCED - Mark cache variables as advanced # automatically # # The following environment variables are also respected for finding the OSG @@ -96,12 +96,12 @@ if(OSG_INCLUDE_DIR) message(STATUS "[ FindOpenSceneGraph.cmake:${CMAKE_CURRENT_LIST_LINE} ] " "Detected OSG_INCLUDE_DIR = ${OSG_INCLUDE_DIR}") endif() - + set(_osg_Version_file "${OSG_INCLUDE_DIR}/osg/Version") if("${OSG_INCLUDE_DIR}" MATCHES "\\.framework$" AND NOT EXISTS "${_osg_Version_file}") set(_osg_Version_file "${OSG_INCLUDE_DIR}/Headers/Version") endif() - + if(EXISTS "${_osg_Version_file}") file(READ "${_osg_Version_file}" _osg_Version_contents) else() @@ -149,7 +149,7 @@ if(OpenSceneGraph_FIND_VERSION AND OPENSCENEGRAPH_VERSION) endif() else() # version is too low - if(NOT OPENSCENEGRAPH_VERSION VERSION_EQUAL ${OpenSceneGraph_FIND_VERSION} AND + if(NOT OPENSCENEGRAPH_VERSION VERSION_EQUAL ${OpenSceneGraph_FIND_VERSION} AND NOT OPENSCENEGRAPH_VERSION VERSION_GREATER ${OpenSceneGraph_FIND_VERSION}) set(_osg_version_not_high_enough TRUE) endif() @@ -182,7 +182,7 @@ endforeach() if(OPENSCENEGRAPH_INCLUDE_DIR) list(REMOVE_DUPLICATES OPENSCENEGRAPH_INCLUDE_DIR) endif() - + # # Inform the users with an error message based on # what version they have vs. what version was @@ -221,7 +221,7 @@ else() set(_osg_missing_message "${_osg_missing_message} ${_osg_module}") endif() endforeach() - + if(_osg_missing_nodekit_fail) message(FATAL_ERROR "ERROR: Missing the following osg " "libraries: ${_osg_missing_message}.\n" diff --git a/Modules/FindOpenThreads.cmake b/Modules/FindOpenThreads.cmake index 6b81fbe..4f6e920 100644 --- a/Modules/FindOpenThreads.cmake +++ b/Modules/FindOpenThreads.cmake @@ -1,10 +1,10 @@ -# OpenThreads is a C++ based threading library. Its largest userbase +# OpenThreads is a C++ based threading library. Its largest userbase # seems to OpenSceneGraph so you might notice I accept OSGDIR as an # environment path. -# I consider this part of the Findosg* suite used to find OpenSceneGraph +# I consider this part of the Findosg* suite used to find OpenSceneGraph # components. # Each component is separate and you must opt in to each module. -# +# # Locate OpenThreads # This module defines # OPENTHREADS_LIBRARY @@ -34,8 +34,8 @@ # #include <OpenThreads/Thread> # To make it easier for one-step automated configuration/builds, -# we leverage environmental paths. This is preferable -# to the -DVAR=value switches because it insulates the +# we leverage environmental paths. This is preferable +# to the -DVAR=value switches because it insulates the # users from changes we may make in this script. # It also offers a little more flexibility than setting # the CMAKE_*_PATH since we can target specific components. @@ -71,8 +71,8 @@ find_path(OPENTHREADS_INCLUDE_DIR OpenThreads/Thread ) -find_library(OPENTHREADS_LIBRARY - NAMES OpenThreads OpenThreadsWin32 +find_library(OPENTHREADS_LIBRARY + NAMES OpenThreads OpenThreadsWin32 HINTS $ENV{OPENTHREADS_LIBRARY_DIR} $ENV{OPENTHREADS_DIR} @@ -90,7 +90,7 @@ find_library(OPENTHREADS_LIBRARY PATH_SUFFIXES lib64 lib ) -find_library(OPENTHREADS_LIBRARY_DEBUG +find_library(OPENTHREADS_LIBRARY_DEBUG NAMES OpenThreadsd OpenThreadsWin32d HINTS $ENV{OPENTHREADS_DEBUG_LIBRARY_DIR} diff --git a/Modules/FindPHP4.cmake b/Modules/FindPHP4.cmake index 6c2965a..abdabe1 100644 --- a/Modules/FindPHP4.cmake +++ b/Modules/FindPHP4.cmake @@ -52,7 +52,7 @@ MARK_AS_ADVANCED( IF(APPLE) # this is a hack for now - SET(CMAKE_SHARED_MODULE_CREATE_C_FLAGS + SET(CMAKE_SHARED_MODULE_CREATE_C_FLAGS "${CMAKE_SHARED_MODULE_CREATE_C_FLAGS} -Wl,-flat_namespace") FOREACH(symbol __efree @@ -76,7 +76,7 @@ IF(APPLE) _zend_wrong_param_count _zval_used_for_init ) - SET(CMAKE_SHARED_MODULE_CREATE_C_FLAGS + SET(CMAKE_SHARED_MODULE_CREATE_C_FLAGS "${CMAKE_SHARED_MODULE_CREATE_C_FLAGS},-U,${symbol}") ENDFOREACH(symbol) ENDIF(APPLE) diff --git a/Modules/FindPerl.cmake b/Modules/FindPerl.cmake index ae686df..bedb839 100644 --- a/Modules/FindPerl.cmake +++ b/Modules/FindPerl.cmake @@ -26,11 +26,11 @@ SET(PERL_POSSIBLE_BIN_PATHS IF(WIN32) GET_FILENAME_COMPONENT( - ActivePerl_CurrentVersion - "[HKEY_LOCAL_MACHINE\\SOFTWARE\\ActiveState\\ActivePerl;CurrentVersion]" + ActivePerl_CurrentVersion + "[HKEY_LOCAL_MACHINE\\SOFTWARE\\ActiveState\\ActivePerl;CurrentVersion]" NAME) SET(PERL_POSSIBLE_BIN_PATHS ${PERL_POSSIBLE_BIN_PATHS} - "C:/Perl/bin" + "C:/Perl/bin" [HKEY_LOCAL_MACHINE\\SOFTWARE\\ActiveState\\ActivePerl\\${ActivePerl_CurrentVersion}]/bin ) ENDIF(WIN32) @@ -73,7 +73,7 @@ ENDIF(PERL_EXECUTABLE) # Deprecated settings for compatibility with CMake1.4 SET(PERL ${PERL_EXECUTABLE}) -# handle the QUIETLY and REQUIRED arguments and set PERL_FOUND to TRUE if +# handle the QUIETLY and REQUIRED arguments and set PERL_FOUND to TRUE if # all listed variables are TRUE INCLUDE(${CMAKE_CURRENT_LIST_DIR}/FindPackageHandleStandardArgs.cmake) FIND_PACKAGE_HANDLE_STANDARD_ARGS(Perl diff --git a/Modules/FindPerlLibs.cmake b/Modules/FindPerlLibs.cmake index b2ffd3c..3db67ac 100644 --- a/Modules/FindPerlLibs.cmake +++ b/Modules/FindPerlLibs.cmake @@ -236,7 +236,7 @@ if (PERL_EXECUTABLE) endif (PERL_EXECUTABLE) -# handle the QUIETLY and REQUIRED arguments and set PERLLIBS_FOUND to TRUE if +# handle the QUIETLY and REQUIRED arguments and set PERLLIBS_FOUND to TRUE if # all listed variables are TRUE include(${CMAKE_CURRENT_LIST_DIR}/FindPackageHandleStandardArgs.cmake) find_package_handle_standard_args(PerlLibs REQUIRED_VARS PERL_LIBRARY PERL_INCLUDE_PATH diff --git a/Modules/FindPhysFS.cmake b/Modules/FindPhysFS.cmake index 2e3ac14..45f9d2e 100644 --- a/Modules/FindPhysFS.cmake +++ b/Modules/FindPhysFS.cmake @@ -8,7 +8,7 @@ # correspond to the ./configure --prefix=$PHYSFSDIR # used in building PHYSFS. # -# Created by Eric Wing. +# Created by Eric Wing. #============================================================================= # Copyright 2005-2009 Kitware, Inc. @@ -36,7 +36,7 @@ FIND_PATH(PHYSFS_INCLUDE_DIR physfs.h /opt ) -FIND_LIBRARY(PHYSFS_LIBRARY +FIND_LIBRARY(PHYSFS_LIBRARY NAMES physfs HINTS $ENV{PHYSFSDIR} diff --git a/Modules/FindPkgConfig.cmake b/Modules/FindPkgConfig.cmake index 39d3a76..99b2c1f 100644 --- a/Modules/FindPkgConfig.cmake +++ b/Modules/FindPkgConfig.cmake @@ -156,7 +156,7 @@ endmacro(_pkgconfig_invoke_dyn) macro(_pkgconfig_parse_options _result _is_req _is_silent) set(${_is_req} 0) set(${_is_silent} 0) - + foreach(_pkg ${ARGN}) if (_pkg STREQUAL "REQUIRED") set(${_is_req} 1) @@ -207,7 +207,7 @@ macro(_pkg_check_modules_internal _is_required _is_silent _prefix) message(STATUS "checking for modules '${_pkg_check_modules_list}'") endif(_pkg_check_modules_cnt EQUAL 1) endif(NOT ${_is_silent}) - + set(_pkg_check_modules_packages) set(_pkg_check_modules_failed) @@ -234,14 +234,14 @@ macro(_pkg_check_modules_internal _is_required _is_silent _prefix) if (_pkg_check_modules_pkg_op STREQUAL "=") list(APPEND _pkg_check_modules_exist_query --exact-version) endif(_pkg_check_modules_pkg_op STREQUAL "=") - + if (_pkg_check_modules_pkg_op STREQUAL "<=") list(APPEND _pkg_check_modules_exist_query --max-version) endif(_pkg_check_modules_pkg_op STREQUAL "<=") # create the final query which is of the format: # * --atleast-version <version> <pkg-name> - # * --exact-version <version> <pkg-name> + # * --exact-version <version> <pkg-name> # * --max-version <version> <pkg-name> # * --exists <pkg-name> if (_pkg_check_modules_pkg_op) @@ -281,7 +281,7 @@ macro(_pkg_check_modules_internal _is_required _is_silent _prefix) else(_pkg_check_modules_failed) # when we are here, we checked whether requested modules # exist. Now, go through them and set variables - + _pkgconfig_set(${_prefix}_FOUND 1) list(LENGTH _pkg_check_modules_packages pkg_count) @@ -293,7 +293,7 @@ macro(_pkg_check_modules_internal _is_required _is_silent _prefix) else(pkg_count EQUAL 1) set(_pkg_check_prefix "${_prefix}_${_pkg_check_modules_pkg}") endif(pkg_count EQUAL 1) - + _pkgconfig_invoke(${_pkg_check_modules_pkg} "${_pkg_check_prefix}" VERSION "" --modversion ) _pkgconfig_invoke(${_pkg_check_modules_pkg} "${_pkg_check_prefix}" PREFIX "" --variable=prefix ) _pkgconfig_invoke(${_pkg_check_modules_pkg} "${_pkg_check_prefix}" INCLUDEDIR "" --variable=includedir ) @@ -363,9 +363,9 @@ macro(pkg_search_module _prefix _module0) message(SEND_ERROR "None of the required '${_pkg_modules_alt}' found") endif(${_pkg_is_required}) endif(NOT ${_prefix}_FOUND) - + _pkgconfig_set(__pkg_config_checked_${_prefix} ${PKG_CONFIG_VERSION}) - endif(NOT DEFINED __pkg_config_checked_${_prefix} OR __pkg_config_checked_${_prefix} LESS ${PKG_CONFIG_VERSION} OR NOT ${_prefix}_FOUND) + endif(NOT DEFINED __pkg_config_checked_${_prefix} OR __pkg_config_checked_${_prefix} LESS ${PKG_CONFIG_VERSION} OR NOT ${_prefix}_FOUND) endmacro(pkg_search_module) ### Local Variables: diff --git a/Modules/FindProducer.cmake b/Modules/FindProducer.cmake index 26c804a..f7840c5 100644 --- a/Modules/FindProducer.cmake +++ b/Modules/FindProducer.cmake @@ -1,18 +1,18 @@ # Though Producer isn't directly part of OpenSceneGraph, its primary user -# is OSG so I consider this part of the Findosg* suite used to find +# is OSG so I consider this part of the Findosg* suite used to find # OpenSceneGraph components. You'll notice that I accept OSGDIR as an # environment path. -# -# Each component is separate and you must opt in to each module. You must -# also opt into OpenGL (and OpenThreads?) as these -# modules won't do it for you. This is to allow you control over your own +# +# Each component is separate and you must opt in to each module. You must +# also opt into OpenGL (and OpenThreads?) as these +# modules won't do it for you. This is to allow you control over your own # system piece by piece in case you need to opt out of certain components # or change the Find behavior for a particular module (perhaps because the # default FindOpenGL.cmake module doesn't work with your system as an # example). # If you want to use a more convenient module that includes everything, # use the FindOpenSceneGraph.cmake instead of the Findosg*.cmake modules. -# +# # Locate Producer # This module defines # PRODUCER_LIBRARY @@ -59,7 +59,7 @@ FIND_PATH(PRODUCER_INCLUDE_DIR Producer/CameraGroup [HKEY_LOCAL_MACHINE\\SYSTEM\\CurrentControlSet\\Control\\Session\ Manager\\Environment;OSG_ROOT]/include ) -FIND_LIBRARY(PRODUCER_LIBRARY +FIND_LIBRARY(PRODUCER_LIBRARY NAMES Producer HINTS $ENV{PRODUCER_DIR} diff --git a/Modules/FindProtobuf.cmake b/Modules/FindProtobuf.cmake index 1e1e493..c8616cc 100644 --- a/Modules/FindProtobuf.cmake +++ b/Modules/FindProtobuf.cmake @@ -109,7 +109,7 @@ function(PROTOBUF_GENERATE_CPP SRCS HDRS) foreach(FIL ${ARGN}) get_filename_component(ABS_FIL ${FIL} ABSOLUTE) get_filename_component(FIL_WE ${FIL} NAME_WE) - + list(APPEND ${SRCS} "${CMAKE_CURRENT_BINARY_DIR}/${FIL_WE}.pb.cc") list(APPEND ${HDRS} "${CMAKE_CURRENT_BINARY_DIR}/${FIL_WE}.pb.h") diff --git a/Modules/FindQt.cmake b/Modules/FindQt.cmake index 2b8dfd7..5a1f6fc 100644 --- a/Modules/FindQt.cmake +++ b/Modules/FindQt.cmake @@ -4,13 +4,13 @@ # If multiple versions of QT are found on the machine, then # The user must set the option DESIRED_QT_VERSION to the version # they want to use. If only one version of qt is found on the machine, -# then the DESIRED_QT_VERSION is set to that version and the +# then the DESIRED_QT_VERSION is set to that version and the # matching FindQt3 or FindQt4 module is included. # Once the user sets DESIRED_QT_VERSION, then the FindQt3 or FindQt4 module # is included. # -# QT_REQUIRED if this is set to TRUE then if CMake can -# not find QT4 or QT3 an error is raised +# QT_REQUIRED if this is set to TRUE then if CMake can +# not find QT4 or QT3 an error is raised # and a message is sent to the user. # # DESIRED_QT_VERSION OPTION is created @@ -72,7 +72,7 @@ ENDIF(QT_QMAKE_EXECUTABLE_FINDQT) IF(QT_QMAKE_EXECUTABLE_FINDQT) EXEC_PROGRAM( ${QT_QMAKE_EXECUTABLE_FINDQT} - ARGS "-query QT_INSTALL_HEADERS" + ARGS "-query QT_INSTALL_HEADERS" OUTPUT_VARIABLE qt_headers ) ENDIF(QT_QMAKE_EXECUTABLE_FINDQT) @@ -94,7 +94,7 @@ IF(QT4_QGLOBAL_H_FILE) ENDIF(QT4_QGLOBAL_H_FILE) FIND_FILE( QT3_QGLOBAL_H_FILE qglobal.h - "${QT_SEARCH_PATH}/Qt/include" + "${QT_SEARCH_PATH}/Qt/include" "[HKEY_CURRENT_USER\\Software\\Trolltech\\Qt3Versions\\3.2.1;InstallDir]/include/Qt" "[HKEY_CURRENT_USER\\Software\\Trolltech\\Qt3Versions\\3.2.0;InstallDir]/include/Qt" "[HKEY_CURRENT_USER\\Software\\Trolltech\\Qt3Versions\\3.1.0;InstallDir]/include/Qt" diff --git a/Modules/FindQt4.cmake b/Modules/FindQt4.cmake index d157dab..e3eb1e6 100644 --- a/Modules/FindQt4.cmake +++ b/Modules/FindQt4.cmake @@ -2,8 +2,8 @@ # This module can be used to find Qt4. # The most important issue is that the Qt4 qmake is available via the system path. # This qmake is then used to detect basically everything else. -# This module defines a number of key variables and macros. -# The variable QT_USE_FILE is set which is the path to a CMake file that can be included +# This module defines a number of key variables and macros. +# The variable QT_USE_FILE is set which is the path to a CMake file that can be included # to compile Qt 4 applications and libraries. It sets up the compilation # environment for include directories, preprocessor defines and populates a # QT_LIBRARIES variable. @@ -15,10 +15,10 @@ # target_link_libraries(myexe ${QT_LIBRARIES}) # # The minimum required version can be specified using the standard find_package()-syntax -# (see example above). +# (see example above). # For compatibility with older versions of FindQt4.cmake it is also possible to -# set the variable QT_MIN_VERSION to the minimum required version of Qt4 before the -# find_package(Qt4) command. +# set the variable QT_MIN_VERSION to the minimum required version of Qt4 before the +# find_package(Qt4) command. # If both are used, the version used in the find_package() command overrides the # one from QT_MIN_VERSION. # @@ -53,26 +53,26 @@ # QT_USE_QTSCRIPTTOOLS # QT_USE_QTDECLARATIVE # -# QT_USE_IMPORTED_TARGETS +# QT_USE_IMPORTED_TARGETS # If this variable is set to TRUE, FindQt4.cmake will create imported -# library targets for the various Qt libraries and set the +# library targets for the various Qt libraries and set the # library variables like QT_QTCORE_LIBRARY to point at these imported -# targets instead of the library file on disk. This provides much better -# handling of the release and debug versions of the Qt libraries and is +# targets instead of the library file on disk. This provides much better +# handling of the release and debug versions of the Qt libraries and is # also always backwards compatible, except for the case that dependencies -# of libraries are exported, these will then also list the names of the +# of libraries are exported, these will then also list the names of the # imported targets as dependency and not the file location on disk. This # is much more flexible, but requires that FindQt4.cmake is executed before # such an exported dependency file is processed. # # There are also some files that need processing by some Qt tools such as moc # and uic. Listed below are macros that may be used to process those files. -# +# # macro QT4_WRAP_CPP(outfiles inputfile ... OPTIONS ...) # create moc code from a list of files containing Qt class with # the Q_OBJECT declaration. Per-directory preprocessor definitions # are also added. Options may be given to moc, such as those found -# when executing "moc -help". +# when executing "moc -help". # # macro QT4_WRAP_UI(outfiles inputfile ... OPTIONS ...) # create code from a list of Qt designer ui files. @@ -92,13 +92,13 @@ # macro QT4_AUTOMOC(sourcefile1 sourcefile2 ... ) # This macro is still experimental. # It can be used to have moc automatically handled. -# So if you have the files foo.h and foo.cpp, and in foo.h a +# So if you have the files foo.h and foo.cpp, and in foo.h a # a class uses the Q_OBJECT macro, moc has to run on it. If you don't # want to use QT4_WRAP_CPP() (which is reliable and mature), you can insert # #include "foo.moc" # in foo.cpp and then give foo.cpp as argument to QT4_AUTOMOC(). This will the # scan all listed files at cmake-time for such included moc files and if it finds -# them cause a rule to be generated to run moc at build time on the +# them cause a rule to be generated to run moc at build time on the # accompanying header file foo.h. # If a source file has the SKIP_AUTOMOC property set it will be ignored by this macro. # @@ -106,7 +106,7 @@ # # macro QT4_ADD_DBUS_INTERFACE(outfiles interface basename) # Create a the interface header and implementation files with the -# given basename from the given interface xml file and add it to +# given basename from the given interface xml file and add it to # the list of sources. # # You can pass additional parameters to the qdbusxml2cpp call by setting @@ -136,19 +136,19 @@ # # macro QT4_GENERATE_DBUS_INTERFACE( header [interfacename] OPTIONS ...) # generate the xml interface file from the given header. -# If the optional argument interfacename is omitted, the name of the +# If the optional argument interfacename is omitted, the name of the # interface file is constructed from the basename of the header with # the suffix .xml appended. # Options may be given to qdbuscpp2xml, such as those found when executing "qdbuscpp2xml --help" # -# macro QT4_CREATE_TRANSLATION( qm_files directories ... sources ... +# macro QT4_CREATE_TRANSLATION( qm_files directories ... sources ... # ts_files ... OPTIONS ...) # out: qm_files # in: directories sources ts_files # options: flags to pass to lupdate, such as -extensions to specify # extensions for a directory scan. # generates commands to create .ts (vie lupdate) and .qm -# (via lrelease) - files from directories and/or sources. The ts files are +# (via lrelease) - files from directories and/or sources. The ts files are # created and/or updated in the source tree (unless given with full paths). # The qm files are generated in the build tree. # Updating the translations can be done by adding the qm_files @@ -211,41 +211,41 @@ # The QT_USE_FILE will also define QT_DEBUG and QT_NO_DEBUG # to fit your current build type. Those are not contained # in QT_DEFINITIONS. -# -# QT_INCLUDES List of paths to all include directories of +# +# QT_INCLUDES List of paths to all include directories of # Qt4 QT_INCLUDE_DIR and QT_QTCORE_INCLUDE_DIR are # always in this variable even if NOTFOUND, # all other INCLUDE_DIRS are # only added if they are found. # You do not need to use this if you include QT_USE_FILE. -# +# # # Include directories for the Qt modules are listed here. # You do not need to use these variables if you include QT_USE_FILE. # # QT_INCLUDE_DIR Path to "include" of Qt4 -# QT_QT3SUPPORT_INCLUDE_DIR Path to "include/Qt3Support" -# QT_QTASSISTANT_INCLUDE_DIR Path to "include/QtAssistant" +# QT_QT3SUPPORT_INCLUDE_DIR Path to "include/Qt3Support" +# QT_QTASSISTANT_INCLUDE_DIR Path to "include/QtAssistant" # QT_QTASSISTANTCLIENT_INCLUDE_DIR Path to "include/QtAssistant" # QT_QAXCONTAINER_INCLUDE_DIR Path to "include/ActiveQt" (Windows only) # QT_QAXSERVER_INCLUDE_DIR Path to "include/ActiveQt" (Windows only) -# QT_QTCORE_INCLUDE_DIR Path to "include/QtCore" +# QT_QTCORE_INCLUDE_DIR Path to "include/QtCore" # QT_QTDBUS_INCLUDE_DIR Path to "include/QtDBus" -# QT_QTDESIGNER_INCLUDE_DIR Path to "include/QtDesigner" +# QT_QTDESIGNER_INCLUDE_DIR Path to "include/QtDesigner" # QT_QTDESIGNERCOMPONENTS_INCLUDE_DIR Path to "include/QtDesigner" -# QT_QTGUI_INCLUDE_DIR Path to "include/QtGui" +# QT_QTGUI_INCLUDE_DIR Path to "include/QtGui" # QT_QTHELP_INCLUDE_DIR Path to "include/QtHelp" -# QT_QTMOTIF_INCLUDE_DIR Path to "include/QtMotif" -# QT_QTMULTIMEDIA_INCLUDE_DIR Path to "include/QtMultimedia" -# QT_QTNETWORK_INCLUDE_DIR Path to "include/QtNetwork" -# QT_QTNSPLUGIN_INCLUDE_DIR Path to "include/QtNsPlugin" -# QT_QTOPENGL_INCLUDE_DIR Path to "include/QtOpenGL" +# QT_QTMOTIF_INCLUDE_DIR Path to "include/QtMotif" +# QT_QTMULTIMEDIA_INCLUDE_DIR Path to "include/QtMultimedia" +# QT_QTNETWORK_INCLUDE_DIR Path to "include/QtNetwork" +# QT_QTNSPLUGIN_INCLUDE_DIR Path to "include/QtNsPlugin" +# QT_QTOPENGL_INCLUDE_DIR Path to "include/QtOpenGL" # QT_QTSCRIPT_INCLUDE_DIR Path to "include/QtScript" -# QT_QTSQL_INCLUDE_DIR Path to "include/QtSql" +# QT_QTSQL_INCLUDE_DIR Path to "include/QtSql" # QT_QTSVG_INCLUDE_DIR Path to "include/QtSvg" # QT_QTTEST_INCLUDE_DIR Path to "include/QtTest" # QT_QTWEBKIT_INCLUDE_DIR Path to "include/QtWebKit" -# QT_QTXML_INCLUDE_DIR Path to "include/QtXml" +# QT_QTXML_INCLUDE_DIR Path to "include/QtXml" # QT_QTXMLPATTERNS_INCLUDE_DIR Path to "include/QtXmlPatterns" # QT_PHONON_INCLUDE_DIR Path to "include/phonon" # QT_QTSCRIPTTOOLS_INCLUDE_DIR Path to "include/QtScriptTools" @@ -292,7 +292,7 @@ # QT_QTMAIN_LIBRARY The qtmain library for Windows # QT_PHONON_LIBRARY The phonon library # QT_QTSCRIPTTOOLS_LIBRARY The QtScriptTools library -# +# # The QtDeclarative library: QT_QTDECLARATIVE_LIBRARY # # also defined, but NOT for general use are @@ -307,17 +307,17 @@ # QT_QCOLLECTIONGENERATOR_EXECUTABLE Where to find the qcollectiongenerator tool. # QT_DESIGNER_EXECUTABLE Where to find the Qt designer tool. # QT_LINGUIST_EXECUTABLE Where to find the Qt linguist tool. -# # -# These are around for backwards compatibility +# +# These are around for backwards compatibility # they will be set # QT_WRAP_CPP Set true if QT_MOC_EXECUTABLE is found # QT_WRAP_UI Set true if QT_UIC_EXECUTABLE is found -# +# # These variables do _NOT_ have any effect anymore (compared to FindQt.cmake) # QT_MT_REQUIRED Qt4 is now always multithreaded -# -# These variables are set to "" Because Qt structure changed +# +# These variables are set to "" Because Qt structure changed # (They make no sense in Qt4) # QT_QT_LIBRARY Qt-Library is now split @@ -340,12 +340,12 @@ IF( Qt4_FIND_COMPONENTS ) STRING( TOUPPER ${component} _COMPONENT ) SET( QT_USE_${_COMPONENT} 1 ) ENDFOREACH( component ) - + # To make sure we don't use QtCore or QtGui when not in COMPONENTS IF(NOT QT_USE_QTCORE) SET( QT_DONT_USE_QTCORE 1 ) ENDIF(NOT QT_USE_QTCORE) - + IF(NOT QT_USE_QTGUI) SET( QT_DONT_USE_QTGUI 1 ) ENDIF(NOT QT_USE_QTGUI) @@ -765,7 +765,7 @@ IF (QT_QMAKE_EXECUTABLE AND QTVERSION) QtHelp QtWebKit QtXmlPatterns phonon QtNetwork QtMultimedia QtNsPlugin QtOpenGL QtSql QtXml QtDesigner QtDBus QtScriptTools QtDeclarative) - + IF(Q_WS_X11) SET(QT_MODULES ${QT_MODULES} QtMotif) ENDIF(Q_WS_X11) @@ -840,7 +840,7 @@ IF (QT_QMAKE_EXECUTABLE AND QTVERSION) ${QT_LIBRARY_DIR}/QtDesigner.framework/Headers NO_DEFAULT_PATH NO_CMAKE_FIND_ROOT_PATH ) - + # Set QT_QTASSISTANT_INCLUDE_DIR FIND_PATH(QT_QTASSISTANT_INCLUDE_DIR QtAssistant PATHS @@ -848,7 +848,7 @@ IF (QT_QMAKE_EXECUTABLE AND QTVERSION) ${QT_LIBRARY_DIR}/QtAssistant.framework/Headers NO_DEFAULT_PATH NO_CMAKE_FIND_ROOT_PATH ) - + # Set QT_QTASSISTANTCLIENT_INCLUDE_DIR FIND_PATH(QT_QTASSISTANTCLIENT_INCLUDE_DIR QAssistantClient PATHS @@ -866,11 +866,11 @@ IF (QT_QMAKE_EXECUTABLE AND QTVERSION) # find the libraries FOREACH(QT_MODULE ${QT_MODULES}) STRING(TOUPPER ${QT_MODULE} _upper_qt_module) - FIND_LIBRARY(QT_${_upper_qt_module}_LIBRARY_RELEASE + FIND_LIBRARY(QT_${_upper_qt_module}_LIBRARY_RELEASE NAMES ${QT_MODULE}${QT_LIBINFIX} ${QT_MODULE}${QT_LIBINFIX}4 PATHS ${QT_LIBRARY_DIR} NO_DEFAULT_PATH NO_CMAKE_FIND_ROOT_PATH ) - FIND_LIBRARY(QT_${_upper_qt_module}_LIBRARY_DEBUG + FIND_LIBRARY(QT_${_upper_qt_module}_LIBRARY_DEBUG NAMES ${QT_MODULE}${QT_LIBINFIX}_debug ${QT_MODULE}${QT_LIBINFIX}d ${QT_MODULE}${QT_LIBINFIX}d4 PATHS ${QT_LIBRARY_DIR} NO_DEFAULT_PATH NO_CMAKE_FIND_ROOT_PATH ) @@ -891,11 +891,11 @@ IF (QT_QMAKE_EXECUTABLE AND QTVERSION) FIND_LIBRARY(QT_QTMAIN_LIBRARY_RELEASE NAMES qtmain${QT_LIBINFIX} PATHS ${QT_LIBRARY_DIR} NO_DEFAULT_PATH NO_CMAKE_FIND_ROOT_PATH) FIND_LIBRARY(QT_QTMAIN_LIBRARY_DEBUG NAMES qtmain${QT_LIBINFIX}d PATHS ${QT_LIBRARY_DIR} NO_DEFAULT_PATH NO_CMAKE_FIND_ROOT_PATH) ENDIF(Q_WS_WIN) - + # Set QT_QTASSISTANTCLIENT_LIBRARY FIND_LIBRARY(QT_QTASSISTANTCLIENT_LIBRARY_RELEASE NAMES QtAssistantClient${QT_LIBINFIX} QtAssistantClient${QT_LIBINFIX}4 PATHS ${QT_LIBRARY_DIR} NO_DEFAULT_PATH NO_CMAKE_FIND_ROOT_PATH) FIND_LIBRARY(QT_QTASSISTANTCLIENT_LIBRARY_DEBUG NAMES QtAssistantClient${QT_LIBINFIX}_debug QtAssistantClient${QT_LIBINFIX}d QtAssistantClient${QT_LIBINFIX}d4 PATHS ${QT_LIBRARY_DIR} NO_DEFAULT_PATH NO_CMAKE_FIND_ROOT_PATH) - + # Set QT_QTASSISTANT_LIBRARY FIND_LIBRARY(QT_QTASSISTANT_LIBRARY_RELEASE NAMES QtAssistantClient${QT_LIBINFIX} QtAssistantClient${QT_LIBINFIX}4 QtAssistant${QT_LIBINFIX} QtAssistant${QT_LIBINFIX}4 PATHS ${QT_LIBRARY_DIR} NO_DEFAULT_PATH NO_CMAKE_FIND_ROOT_PATH) FIND_LIBRARY(QT_QTASSISTANT_LIBRARY_DEBUG NAMES QtAssistantClient${QT_LIBINFIX}_debug QtAssistantClient${QT_LIBINFIX}d QtAssistantClient${QT_LIBINFIX}d4 QtAssistant${QT_LIBINFIX}_debug QtAssistant${QT_LIBINFIX}d4 PATHS ${QT_LIBRARY_DIR} NO_DEFAULT_PATH NO_CMAKE_FIND_ROOT_PATH) @@ -915,7 +915,7 @@ IF (QT_QMAKE_EXECUTABLE AND QTVERSION) ############################################ - # Set QT_xyz_LIBRARY variable and add + # Set QT_xyz_LIBRARY variable and add # library include path to QT_INCLUDES _QT4_ADJUST_LIB_VARS(QtCore) @@ -938,7 +938,7 @@ IF (QT_QMAKE_EXECUTABLE AND QTVERSION) ####################################### # - # Check the executables of Qt + # Check the executables of Qt # ( moc, uic, rcc ) # ####################################### @@ -957,7 +957,7 @@ IF (QT_QMAKE_EXECUTABLE AND QTVERSION) SET(QT_DESIGNER_EXECUTABLE NOTFOUND) SET(QT_LINGUIST_EXECUTABLE NOTFOUND) ENDIF(QT_QMAKE_CHANGED) - + FIND_PROGRAM(QT_MOC_EXECUTABLE NAMES moc-qt4 moc PATHS ${QT_BINARY_DIR} @@ -976,19 +976,19 @@ IF (QT_QMAKE_EXECUTABLE AND QTVERSION) NO_DEFAULT_PATH NO_CMAKE_FIND_ROOT_PATH ) - FIND_PROGRAM(QT_RCC_EXECUTABLE + FIND_PROGRAM(QT_RCC_EXECUTABLE NAMES rcc PATHS ${QT_BINARY_DIR} NO_DEFAULT_PATH NO_CMAKE_FIND_ROOT_PATH ) - FIND_PROGRAM(QT_DBUSCPP2XML_EXECUTABLE + FIND_PROGRAM(QT_DBUSCPP2XML_EXECUTABLE NAMES qdbuscpp2xml PATHS ${QT_BINARY_DIR} NO_DEFAULT_PATH NO_CMAKE_FIND_ROOT_PATH ) - FIND_PROGRAM(QT_DBUSXML2CPP_EXECUTABLE + FIND_PROGRAM(QT_DBUSXML2CPP_EXECUTABLE NAMES qdbusxml2cpp PATHS ${QT_BINARY_DIR} NO_DEFAULT_PATH NO_CMAKE_FIND_ROOT_PATH @@ -1043,10 +1043,10 @@ IF (QT_QMAKE_EXECUTABLE AND QTVERSION) # get the directory of the current file, used later on in the file GET_FILENAME_COMPONENT( _qt4_current_dir "${CMAKE_CURRENT_LIST_FILE}" PATH) - + ############################################### # - # configuration/system dependent settings + # configuration/system dependent settings # ############################################### diff --git a/Modules/FindQuickTime.cmake b/Modules/FindQuickTime.cmake index 038c2dd..ccbcb31 100644 --- a/Modules/FindQuickTime.cmake +++ b/Modules/FindQuickTime.cmake @@ -1,13 +1,13 @@ # Locate QuickTime # This module defines # QUICKTIME_LIBRARY -# QUICKTIME_FOUND, if false, do not try to link to gdal +# QUICKTIME_FOUND, if false, do not try to link to gdal # QUICKTIME_INCLUDE_DIR, where to find the headers # # $QUICKTIME_DIR is an environment variable that would # correspond to the ./configure --prefix=$QUICKTIME_DIR # -# Created by Eric Wing. +# Created by Eric Wing. #============================================================================= # Copyright 2007-2009 Kitware, Inc. diff --git a/Modules/FindSDL.cmake b/Modules/FindSDL.cmake index 1c04726..363591f 100644 --- a/Modules/FindSDL.cmake +++ b/Modules/FindSDL.cmake @@ -6,22 +6,22 @@ # # This module responds to the the flag: # SDL_BUILDING_LIBRARY -# If this is defined, then no SDL_main will be linked in because +# If this is defined, then no SDL_main will be linked in because # only applications need main(). # Otherwise, it is assumed you are building an application and this # module will attempt to locate and set the the proper link flags # as part of the returned SDL_LIBRARY variable. # -# Don't forget to include SDLmain.h and SDLmain.m your project for the +# Don't forget to include SDLmain.h and SDLmain.m your project for the # OS X framework based version. (Other versions link to -lSDLmain which -# this module will try to find on your behalf.) Also for OS X, this +# this module will try to find on your behalf.) Also for OS X, this # module will automatically add the -framework Cocoa on your behalf. # # # Additional Note: If you see an empty SDL_LIBRARY_TEMP in your configuration -# and no SDL_LIBRARY, it means CMake did not find your SDL library -# (SDL.dll, libsdl.so, SDL.framework, etc). -# Set SDL_LIBRARY_TEMP to point to your SDL library, and configure again. +# and no SDL_LIBRARY, it means CMake did not find your SDL library +# (SDL.dll, libsdl.so, SDL.framework, etc). +# Set SDL_LIBRARY_TEMP to point to your SDL library, and configure again. # Similarly, if you see an empty SDLMAIN_LIBRARY, you should set this value # as appropriate. These values are used to generate the final SDL_LIBRARY # variable, but when these values are unset, SDL_LIBRARY does not get created. @@ -32,18 +32,18 @@ # used in building SDL. # l.e.galup 9-20-02 # -# Modified by Eric Wing. +# Modified by Eric Wing. # Added code to assist with automated building by using environmental variables # and providing a more controlled/consistent search behavior. -# Added new modifications to recognize OS X frameworks and -# additional Unix paths (FreeBSD, etc). +# Added new modifications to recognize OS X frameworks and +# additional Unix paths (FreeBSD, etc). # Also corrected the header search path to follow "proper" SDL guidelines. # Added a search for SDLmain which is needed by some platforms. # Added a search for threads which is needed by some platforms. # Added needed compile switches for MinGW. # # On OSX, this will prefer the Framework version (if found) over others. -# People will have to manually change the cache values of +# People will have to manually change the cache values of # SDL_LIBRARY to override this selection or set the CMake environment # CMAKE_INCLUDE_PATH to modify the search paths. # @@ -84,7 +84,7 @@ FIND_PATH(SDL_INCLUDE_DIR SDL.h # SDL-1.1 is the name used by FreeBSD ports... # don't confuse it for the version number. -FIND_LIBRARY(SDL_LIBRARY_TEMP +FIND_LIBRARY(SDL_LIBRARY_TEMP NAMES SDL SDL-1.1 HINTS $ENV{SDLDIR} @@ -98,11 +98,11 @@ FIND_LIBRARY(SDL_LIBRARY_TEMP IF(NOT SDL_BUILDING_LIBRARY) IF(NOT ${SDL_INCLUDE_DIR} MATCHES ".framework") - # Non-OS X framework versions expect you to also dynamically link to - # SDLmain. This is mainly for Windows and OS X. Other (Unix) platforms + # Non-OS X framework versions expect you to also dynamically link to + # SDLmain. This is mainly for Windows and OS X. Other (Unix) platforms # seem to provide SDLmain for compatibility even though they don't # necessarily need it. - FIND_LIBRARY(SDLMAIN_LIBRARY + FIND_LIBRARY(SDLMAIN_LIBRARY NAMES SDLmain SDLmain-1.1 HINTS $ENV{SDLDIR} @@ -117,8 +117,8 @@ IF(NOT SDL_BUILDING_LIBRARY) ENDIF(NOT SDL_BUILDING_LIBRARY) # SDL may require threads on your system. -# The Apple build may not need an explicit flag because one of the -# frameworks may already provide it. +# The Apple build may not need an explicit flag because one of the +# frameworks may already provide it. # But for non-OSX systems, I will use the CMake Threads package. IF(NOT APPLE) FIND_PACKAGE(Threads) @@ -140,15 +140,15 @@ IF(SDL_LIBRARY_TEMP) ENDIF(NOT SDL_BUILDING_LIBRARY) # For OS X, SDL uses Cocoa as a backend so it must link to Cocoa. - # CMake doesn't display the -framework Cocoa string in the UI even + # CMake doesn't display the -framework Cocoa string in the UI even # though it actually is there if I modify a pre-used variable. # I think it has something to do with the CACHE STRING. - # So I use a temporary variable until the end so I can set the + # So I use a temporary variable until the end so I can set the # "real" variable in one-shot. IF(APPLE) SET(SDL_LIBRARY_TEMP ${SDL_LIBRARY_TEMP} "-framework Cocoa") ENDIF(APPLE) - + # For threads, as mentioned Apple doesn't need this. # In fact, there seems to be a problem if I used the Threads package # and try using this line, so I'm just skipping it entirely for OS X. diff --git a/Modules/FindSDL_image.cmake b/Modules/FindSDL_image.cmake index f215bda..7128f67 100644 --- a/Modules/FindSDL_image.cmake +++ b/Modules/FindSDL_image.cmake @@ -8,8 +8,8 @@ # correspond to the ./configure --prefix=$SDLDIR # used in building SDL. # -# Created by Eric Wing. This was influenced by the FindSDL.cmake -# module, but with modifications to recognize OS X frameworks and +# Created by Eric Wing. This was influenced by the FindSDL.cmake +# module, but with modifications to recognize OS X frameworks and # additional Unix paths (FreeBSD, etc). #============================================================================= @@ -44,12 +44,12 @@ FIND_PATH(SDLIMAGE_INCLUDE_DIR SDL_image.h /opt/local/include/SDL # DarwinPorts /opt/local/include /opt/csw/include/SDL # Blastwave - /opt/csw/include + /opt/csw/include /opt/include/SDL /opt/include ) -FIND_LIBRARY(SDLIMAGE_LIBRARY +FIND_LIBRARY(SDLIMAGE_LIBRARY NAMES SDL_image HINTS $ENV{SDLIMAGEDIR} diff --git a/Modules/FindSDL_mixer.cmake b/Modules/FindSDL_mixer.cmake index 7cc1a6b..e8da640 100644 --- a/Modules/FindSDL_mixer.cmake +++ b/Modules/FindSDL_mixer.cmake @@ -8,8 +8,8 @@ # correspond to the ./configure --prefix=$SDLDIR # used in building SDL. # -# Created by Eric Wing. This was influenced by the FindSDL.cmake -# module, but with modifications to recognize OS X frameworks and +# Created by Eric Wing. This was influenced by the FindSDL.cmake +# module, but with modifications to recognize OS X frameworks and # additional Unix paths (FreeBSD, etc). #============================================================================= @@ -44,12 +44,12 @@ FIND_PATH(SDLMIXER_INCLUDE_DIR SDL_mixer.h /opt/local/include/SDL # DarwinPorts /opt/local/include /opt/csw/include/SDL # Blastwave - /opt/csw/include + /opt/csw/include /opt/include/SDL /opt/include ) -FIND_LIBRARY(SDLMIXER_LIBRARY +FIND_LIBRARY(SDLMIXER_LIBRARY NAMES SDL_mixer HINTS $ENV{SDLMIXERDIR} diff --git a/Modules/FindSDL_net.cmake b/Modules/FindSDL_net.cmake index ca1de79..f1bd091 100644 --- a/Modules/FindSDL_net.cmake +++ b/Modules/FindSDL_net.cmake @@ -8,8 +8,8 @@ # correspond to the ./configure --prefix=$SDLDIR # used in building SDL. # -# Created by Eric Wing. This was influenced by the FindSDL.cmake -# module, but with modifications to recognize OS X frameworks and +# Created by Eric Wing. This was influenced by the FindSDL.cmake +# module, but with modifications to recognize OS X frameworks and # additional Unix paths (FreeBSD, etc). #============================================================================= @@ -44,11 +44,11 @@ FIND_PATH(SDLNET_INCLUDE_DIR SDL_net.h /opt/local/include/SDL # DarwinPorts /opt/local/include /opt/csw/include/SDL # Blastwave - /opt/csw/include + /opt/csw/include /opt/include/SDL /opt/include ) -FIND_LIBRARY(SDLNET_LIBRARY +FIND_LIBRARY(SDLNET_LIBRARY NAMES SDL_net HINTS $ENV{SDLNETDIR} diff --git a/Modules/FindSDL_sound.cmake b/Modules/FindSDL_sound.cmake index 35294a5..963a811 100644 --- a/Modules/FindSDL_sound.cmake +++ b/Modules/FindSDL_sound.cmake @@ -1,18 +1,18 @@ # Locates the SDL_sound library -# This module depends on SDL being found and +# This module depends on SDL being found and # must be called AFTER FindSDL.cmake is called. # This module defines # SDL_SOUND_INCLUDE_DIR, where to find SDL_sound.h # SDL_SOUND_FOUND, if false, do not try to link to SDL -# SDL_SOUND_LIBRARIES, this contains the list of libraries that you need +# SDL_SOUND_LIBRARIES, this contains the list of libraries that you need # to link against. This is a read-only variable and is marked INTERNAL. # SDL_SOUND_EXTRAS, this is an optional variable for you to add your own # flags to SDL_SOUND_LIBRARIES. This is prepended to SDL_SOUND_LIBRARIES. # This is available mostly for cases this module failed to anticipate for # and you must add additional flags. This is marked as ADVANCED. - + # # This module also defines (but you shouldn't need to use directly) # SDL_SOUND_LIBRARY, the name of just the SDL_sound library you would link @@ -26,32 +26,32 @@ # FLAC_LIBRARY # SPEEX_LIBRARY # -# Typically, you should not use these variables directly, and you should use -# SDL_SOUND_LIBRARIES which contains SDL_SOUND_LIBRARY and the other audio libraries -# (if needed) to successfully compile on your system . +# Typically, you should not use these variables directly, and you should use +# SDL_SOUND_LIBRARIES which contains SDL_SOUND_LIBRARY and the other audio libraries +# (if needed) to successfully compile on your system . # -# Created by Eric Wing. +# Created by Eric Wing. # This module is a bit more complicated than the other FindSDL* family modules. # The reason is that SDL_sound can be compiled in a large variety of different ways # which are independent of platform. SDL_sound may dynamically link against other 3rd # party libraries to get additional codec support, such as Ogg Vorbis, SMPEG, ModPlug, -# MikMod, FLAC, Speex, and potentially others. -# Under some circumstances which I don't fully understand, +# MikMod, FLAC, Speex, and potentially others. +# Under some circumstances which I don't fully understand, # there seems to be a requirement -# that dependent libraries of libraries you use must also be explicitly -# linked against in order to successfully compile. SDL_sound does not currently +# that dependent libraries of libraries you use must also be explicitly +# linked against in order to successfully compile. SDL_sound does not currently # have any system in place to know how it was compiled. -# So this CMake module does the hard work in trying to discover which 3rd party +# So this CMake module does the hard work in trying to discover which 3rd party # libraries are required for building (if any). # This module uses a brute force approach to create a test program that uses SDL_sound, -# and then tries to build it. If the build fails, it parses the error output for +# and then tries to build it. If the build fails, it parses the error output for # known symbol names to figure out which libraries are needed. # # Responds to the $SDLDIR and $SDLSOUNDDIR environmental variable that would # correspond to the ./configure --prefix=$SDLDIR used in building SDL. # # On OSX, this will prefer the Framework version (if found) over others. -# People will have to manually change the cache values of +# People will have to manually change the cache values of # SDL_LIBRARY to override this selectionor set the CMake environment # CMAKE_INCLUDE_PATH to modify the search paths. # @@ -91,12 +91,12 @@ FIND_PATH(SDL_SOUND_INCLUDE_DIR SDL_sound.h /opt/local/include/SDL # DarwinPorts /opt/local/include /opt/csw/include/SDL # Blastwave - /opt/csw/include + /opt/csw/include /opt/include/SDL /opt/include ) -FIND_LIBRARY(SDL_SOUND_LIBRARY +FIND_LIBRARY(SDL_SOUND_LIBRARY NAMES SDL_sound HINTS $ENV{SDLSOUNDDIR}/lib @@ -116,7 +116,7 @@ IF(SDL_FOUND AND SDL_SOUND_INCLUDE_DIR AND SDL_SOUND_LIBRARY) # for the :STRING syntax if I have multiple values contained in a # single variable. This is a problem for the SDL_LIBRARY variable # because it does just that. When I feed this variable to the command, - # only the first value gets the appropriate modifier (e.g. -I) and + # only the first value gets the appropriate modifier (e.g. -I) and # the rest get dropped. # To get multiple single variables to work, I must separate them with a "\;" # I could go back and modify the FindSDL.cmake module, but that's kind of painful. @@ -125,12 +125,12 @@ IF(SDL_FOUND AND SDL_SOUND_INCLUDE_DIR AND SDL_SOUND_LIBRARY) # Instead, it was suggested on the mailing list to write a temporary CMakeLists.txt # with a temporary test project and invoke that with TRY_COMPILE. # See message thread "Figuring out dependencies for a library in order to build" - # 2005-07-16 - # TRY_COMPILE( + # 2005-07-16 + # TRY_COMPILE( # MY_RESULT # ${CMAKE_BINARY_DIR} # ${PROJECT_SOURCE_DIR}/DetermineSoundLibs.c - # CMAKE_FLAGS + # CMAKE_FLAGS # -DINCLUDE_DIRECTORIES:STRING=${SDL_INCLUDE_DIR}\;${SDL_SOUND_INCLUDE_DIR} # -DLINK_LIBRARIES:STRING=${SDL_SOUND_LIBRARY}\;${SDL_LIBRARY} # OUTPUT_VARIABLE MY_OUTPUT @@ -149,25 +149,25 @@ IF(SDL_FOUND AND SDL_SOUND_INCLUDE_DIR AND SDL_SOUND_LIBRARY) SDL_Init(0); Sound_Init(); - + /* This doesn't actually have to work, but Init() is a no-op * for some of the decoders, so this should force more symbols * to be pulled in. */ sample = Sound_NewSampleFromFile(argv[1], &desired, 4096); - + Sound_Quit(); SDL_Quit(); return 0; }" ) - # Calling + # Calling # TARGET_LINK_LIBRARIES(DetermineSoundLibs "${SDL_SOUND_LIBRARY} ${SDL_LIBRARY}) # causes problems when SDL_LIBRARY looks like # /Library/Frameworks/SDL.framework;-framework Cocoa # The ;-framework Cocoa seems to be confusing CMake once the OS X - # framework support was added. I was told that breaking up the list + # framework support was added. I was told that breaking up the list # would fix the problem. SET(TMP_TRY_LIBS) FOREACH(lib ${SDL_SOUND_LIBRARY} ${SDL_LIBRARY}) @@ -175,10 +175,10 @@ IF(SDL_FOUND AND SDL_SOUND_INCLUDE_DIR AND SDL_SOUND_LIBRARY) ENDFOREACH(lib) # MESSAGE("TMP_TRY_LIBS ${TMP_TRY_LIBS}") - + # Write the CMakeLists.txt and test project # Weird, this is still sketchy. If I don't quote the variables - # in the TARGET_LINK_LIBRARIES, I seem to loose everything + # in the TARGET_LINK_LIBRARIES, I seem to loose everything # in the SDL_LIBRARY string after the "-framework". # But if I quote the stuff in INCLUDE_DIRECTORIES, it doesn't work. FILE(WRITE ${PROJECT_BINARY_DIR}/CMakeTmp/CMakeLists.txt @@ -188,25 +188,25 @@ IF(SDL_FOUND AND SDL_SOUND_INCLUDE_DIR AND SDL_SOUND_LIBRARY) TARGET_LINK_LIBRARIES(DetermineSoundLibs ${TMP_TRY_LIBS})" ) - TRY_COMPILE( + TRY_COMPILE( MY_RESULT ${PROJECT_BINARY_DIR}/CMakeTmp ${PROJECT_BINARY_DIR}/CMakeTmp DetermineSoundLibs OUTPUT_VARIABLE MY_OUTPUT ) - + # MESSAGE("${MY_RESULT}") # MESSAGE(${MY_OUTPUT}) - + IF(NOT MY_RESULT) - + # I expect that MPGLIB, VOC, WAV, AIFF, and SHN are compiled in statically. # I think Timidity is also compiled in statically. # I've never had to explcitly link against Quicktime, so I'll skip that for now. - + SET(SDL_SOUND_LIBRARIES_TMP ${SDL_SOUND_LIBRARY}) - + # Find MikMod IF("${MY_OUTPUT}" MATCHES "MikMod_") FIND_LIBRARY(MIKMOD_LIBRARY @@ -222,12 +222,12 @@ IF(SDL_FOUND AND SDL_SOUND_INCLUDE_DIR AND SDL_SOUND_LIBRARY) /opt/local/lib /opt/csw/lib /opt/lib - ) + ) IF(MIKMOD_LIBRARY) SET(SDL_SOUND_LIBRARIES_TMP ${SDL_SOUND_LIBRARIES_TMP} ${MIKMOD_LIBRARY}) ENDIF(MIKMOD_LIBRARY) ENDIF("${MY_OUTPUT}" MATCHES "MikMod_") - + # Find ModPlug IF("${MY_OUTPUT}" MATCHES "MODPLUG_") FIND_LIBRARY(MODPLUG_LIBRARY @@ -249,7 +249,7 @@ IF(SDL_FOUND AND SDL_SOUND_INCLUDE_DIR AND SDL_SOUND_LIBRARY) ENDIF(MODPLUG_LIBRARY) ENDIF("${MY_OUTPUT}" MATCHES "MODPLUG_") - + # Find Ogg and Vorbis IF("${MY_OUTPUT}" MATCHES "ov_") FIND_LIBRARY(VORBIS_LIBRARY @@ -271,7 +271,7 @@ IF(SDL_FOUND AND SDL_SOUND_INCLUDE_DIR AND SDL_SOUND_LIBRARY) IF(VORBIS_LIBRARY) SET(SDL_SOUND_LIBRARIES_TMP ${SDL_SOUND_LIBRARIES_TMP} ${VORBIS_LIBRARY}) ENDIF(VORBIS_LIBRARY) - + FIND_LIBRARY(OGG_LIBRARY NAMES ogg Ogg OGG PATHS @@ -292,8 +292,8 @@ IF(SDL_FOUND AND SDL_SOUND_INCLUDE_DIR AND SDL_SOUND_LIBRARY) SET(SDL_SOUND_LIBRARIES_TMP ${SDL_SOUND_LIBRARIES_TMP} ${OGG_LIBRARY}) ENDIF(OGG_LIBRARY) ENDIF("${MY_OUTPUT}" MATCHES "ov_") - - + + # Find SMPEG IF("${MY_OUTPUT}" MATCHES "SMPEG_") FIND_LIBRARY(SMPEG_LIBRARY @@ -314,8 +314,8 @@ IF(SDL_FOUND AND SDL_SOUND_INCLUDE_DIR AND SDL_SOUND_LIBRARY) SET(SDL_SOUND_LIBRARIES_TMP ${SDL_SOUND_LIBRARIES_TMP} ${SMPEG_LIBRARY}) ENDIF(SMPEG_LIBRARY) ENDIF("${MY_OUTPUT}" MATCHES "SMPEG_") - - + + # Find FLAC IF("${MY_OUTPUT}" MATCHES "FLAC_") FIND_LIBRARY(FLAC_LIBRARY @@ -336,8 +336,8 @@ IF(SDL_FOUND AND SDL_SOUND_INCLUDE_DIR AND SDL_SOUND_LIBRARY) SET(SDL_SOUND_LIBRARIES_TMP ${SDL_SOUND_LIBRARIES_TMP} ${FLAC_LIBRARY}) ENDIF(FLAC_LIBRARY) ENDIF("${MY_OUTPUT}" MATCHES "FLAC_") - - + + # Hmmm...Speex seems to depend on Ogg. This might be a problem if # the TRY_COMPILE attempt gets blocked at SPEEX before it can pull # in the Ogg symbols. I'm not sure if I should duplicate the ogg stuff @@ -360,7 +360,7 @@ IF(SDL_FOUND AND SDL_SOUND_INCLUDE_DIR AND SDL_SOUND_LIBRARY) IF(SPEEX_LIBRARY) SET(SDL_SOUND_LIBRARIES_TMP ${SDL_SOUND_LIBRARIES_TMP} ${SPEEX_LIBRARY}) ENDIF(SPEEX_LIBRARY) - + # Find OGG (needed for Speex) # We might have already found Ogg for Vorbis, so skip it if so. IF(NOT OGG_LIBRARY) @@ -387,7 +387,7 @@ IF(SDL_FOUND AND SDL_SOUND_INCLUDE_DIR AND SDL_SOUND_LIBRARY) ENDIF(OGG_LIBRARY) ENDIF(NOT OGG_LIBRARY) ENDIF("${MY_OUTPUT}" MATCHES "speex_") - + ELSE(NOT MY_RESULT) SET(SDL_SOUND_LIBRARIES "${SDL_SOUND_EXTRAS} ${SDL_SOUND_LIBRARY}" CACHE INTERNAL "SDL_sound and dependent libraries") ENDIF(NOT MY_RESULT) diff --git a/Modules/FindSDL_ttf.cmake b/Modules/FindSDL_ttf.cmake index 184b6c3..8bba213 100644 --- a/Modules/FindSDL_ttf.cmake +++ b/Modules/FindSDL_ttf.cmake @@ -8,8 +8,8 @@ # correspond to the ./configure --prefix=$SDLDIR # used in building SDL. # -# Created by Eric Wing. This was influenced by the FindSDL.cmake -# module, but with modifications to recognize OS X frameworks and +# Created by Eric Wing. This was influenced by the FindSDL.cmake +# module, but with modifications to recognize OS X frameworks and # additional Unix paths (FreeBSD, etc). #============================================================================= @@ -44,12 +44,12 @@ FIND_PATH(SDLTTF_INCLUDE_DIR SDL_ttf.h /opt/local/include/SDL # DarwinPorts /opt/local/include /opt/csw/include/SDL # Blastwave - /opt/csw/include + /opt/csw/include /opt/include/SDL /opt/include ) -FIND_LIBRARY(SDLTTF_LIBRARY +FIND_LIBRARY(SDLTTF_LIBRARY NAMES SDL_ttf HINTS $ENV{SDLTTFDIR} diff --git a/Modules/FindSWIG.cmake b/Modules/FindSWIG.cmake index 2e34eb1..d11d1e4 100644 --- a/Modules/FindSWIG.cmake +++ b/Modules/FindSWIG.cmake @@ -35,7 +35,7 @@ IF(SWIG_EXECUTABLE) ERROR_VARIABLE SWIG_swiglib_error RESULT_VARIABLE SWIG_swiglib_result) - IF(SWIG_swiglib_result) + IF(SWIG_swiglib_result) IF(SWIG_FIND_REQUIRED) MESSAGE(SEND_ERROR "Command \"${SWIG_EXECUTABLE} -swiglib\" failed with output:\n${SWIG_swiglib_error}") ELSE(SWIG_FIND_REQUIRED) diff --git a/Modules/FindSelfPackers.cmake b/Modules/FindSelfPackers.cmake index d9dc25c..d13b0c4 100644 --- a/Modules/FindSelfPackers.cmake +++ b/Modules/FindSelfPackers.cmake @@ -24,7 +24,7 @@ FIND_PROGRAM(SELF_PACKER_FOR_EXECUTABLE upx ${CYGWIN_INSTALL_PATH}/bin /bin - /usr/bin + /usr/bin /usr/local/bin /sbin ) @@ -33,7 +33,7 @@ FIND_PROGRAM(SELF_PACKER_FOR_SHARED_LIB upx ${CYGWIN_INSTALL_PATH}/bin /bin - /usr/bin + /usr/bin /usr/local/bin /sbin ) @@ -47,18 +47,18 @@ MARK_AS_ADVANCED( # Set flags # IF (SELF_PACKER_FOR_EXECUTABLE MATCHES "upx") - SET (SELF_PACKER_FOR_EXECUTABLE_FLAGS "-q" CACHE STRING + SET (SELF_PACKER_FOR_EXECUTABLE_FLAGS "-q" CACHE STRING "Flags for the executable self-packer.") ELSE (SELF_PACKER_FOR_EXECUTABLE MATCHES "upx") - SET (SELF_PACKER_FOR_EXECUTABLE_FLAGS "" CACHE STRING + SET (SELF_PACKER_FOR_EXECUTABLE_FLAGS "" CACHE STRING "Flags for the executable self-packer.") ENDIF (SELF_PACKER_FOR_EXECUTABLE MATCHES "upx") IF (SELF_PACKER_FOR_SHARED_LIB MATCHES "upx") - SET (SELF_PACKER_FOR_SHARED_LIB_FLAGS "-q" CACHE STRING + SET (SELF_PACKER_FOR_SHARED_LIB_FLAGS "-q" CACHE STRING "Flags for the shared lib self-packer.") ELSE (SELF_PACKER_FOR_SHARED_LIB MATCHES "upx") - SET (SELF_PACKER_FOR_SHARED_LIB_FLAGS "" CACHE STRING + SET (SELF_PACKER_FOR_SHARED_LIB_FLAGS "" CACHE STRING "Flags for the shared lib self-packer.") ENDIF (SELF_PACKER_FOR_SHARED_LIB MATCHES "upx") diff --git a/Modules/FindSquish.cmake b/Modules/FindSquish.cmake index 48d195a..3b69b07 100644 --- a/Modules/FindSquish.cmake +++ b/Modules/FindSquish.cmake @@ -79,7 +79,7 @@ IF(SQUISH_INSTALL_DIR) # find the server program IF(NOT SQUISH_SERVER_EXECUTABLE) FIND_PROGRAM(SQUISH_SERVER_EXECUTABLE ${SQUISH_INSTALL_DIR}/bin/squishserver DOC "The ${SQUISH_SERVER_EXECUTABLE_STRING}") - ENDIF(NOT SQUISH_SERVER_EXECUTABLE) + ENDIF(NOT SQUISH_SERVER_EXECUTABLE) ELSE(SQUISH_INSTALL_DIR) SET(SQUISH_INSTALL_DIR_FOUND 0) @@ -88,14 +88,14 @@ ENDIF(SQUISH_INSTALL_DIR) # record if executables are set IF(SQUISH_CLIENT_EXECUTABLE) SET(SQUISH_CLIENT_EXECUTABLE_FOUND 1) -ELSE(SQUISH_CLIENT_EXECUTABLE) - SET(SQUISH_CLIENT_EXECUTABLE_FOUND 0) +ELSE(SQUISH_CLIENT_EXECUTABLE) + SET(SQUISH_CLIENT_EXECUTABLE_FOUND 0) ENDIF(SQUISH_CLIENT_EXECUTABLE) IF(SQUISH_SERVER_EXECUTABLE) SET(SQUISH_SERVER_EXECUTABLE_FOUND 1) -ELSE(SQUISH_SERVER_EXECUTABLE) - SET(SQUISH_SERVER_EXECUTABLE_FOUND 0) +ELSE(SQUISH_SERVER_EXECUTABLE) + SET(SQUISH_SERVER_EXECUTABLE_FOUND 0) ENDIF(SQUISH_SERVER_EXECUTABLE) # record if Squish was found @@ -122,4 +122,4 @@ MACRO(SQUISH_ADD_TEST testName testAUT testCase envVars testWraper) PROPERTIES FAIL_REGULAR_EXPRESSION "FAILED;ERROR;FATAL" ) ENDMACRO(SQUISH_ADD_TEST) - + diff --git a/Modules/FindTCL.cmake b/Modules/FindTCL.cmake index 7f6d3a7..763b5ef 100644 --- a/Modules/FindTCL.cmake +++ b/Modules/FindTCL.cmake @@ -18,11 +18,11 @@ # - The stub libraries are now found in FindTclStub.cmake # => they were only useful for people writing Tcl/Tk extensions. # - TCL_LIBRARY_DEBUG and TK_LIBRARY_DEBUG were removed. -# => these libs are not packaged by default with Tcl/Tk distributions. +# => these libs are not packaged by default with Tcl/Tk distributions. # Even when Tcl/Tk is built from source, several flavors of debug libs # are created and there is no real reason to pick a single one -# specifically (say, amongst tcl84g, tcl84gs, or tcl84sgx). -# Let's leave that choice to the user by allowing him to assign +# specifically (say, amongst tcl84g, tcl84gs, or tcl84sgx). +# Let's leave that choice to the user by allowing him to assign # TCL_LIBRARY to any Tcl library, debug or not. # - TK_INTERNAL_PATH was removed. # => this ended up being only a Win32 variable, and there is a lot of @@ -59,7 +59,7 @@ ENDIF(TCLSH_VERSION_STRING) GET_FILENAME_COMPONENT(TK_WISH_PATH "${TK_WISH}" PATH) GET_FILENAME_COMPONENT(TK_WISH_PATH_PARENT "${TK_WISH_PATH}" PATH) -STRING(REGEX REPLACE +STRING(REGEX REPLACE "^.*wish([0-9]\\.*[0-9]).*$" "\\1" TK_WISH_VERSION "${TK_WISH}") GET_FILENAME_COMPONENT(TCL_INCLUDE_PATH_PARENT "${TCL_INCLUDE_PATH}" PATH) @@ -67,12 +67,12 @@ GET_FILENAME_COMPONENT(TK_INCLUDE_PATH_PARENT "${TK_INCLUDE_PATH}" PATH) GET_FILENAME_COMPONENT(TCL_LIBRARY_PATH "${TCL_LIBRARY}" PATH) GET_FILENAME_COMPONENT(TCL_LIBRARY_PATH_PARENT "${TCL_LIBRARY_PATH}" PATH) -STRING(REGEX REPLACE +STRING(REGEX REPLACE "^.*tcl([0-9]\\.*[0-9]).*$" "\\1" TCL_LIBRARY_VERSION "${TCL_LIBRARY}") GET_FILENAME_COMPONENT(TK_LIBRARY_PATH "${TK_LIBRARY}" PATH) GET_FILENAME_COMPONENT(TK_LIBRARY_PATH_PARENT "${TK_LIBRARY_PATH}" PATH) -STRING(REGEX REPLACE +STRING(REGEX REPLACE "^.*tk([0-9]\\.*[0-9]).*$" "\\1" TK_LIBRARY_VERSION "${TK_LIBRARY}") SET(TCLTK_POSSIBLE_LIB_PATHS @@ -86,8 +86,8 @@ SET(TCLTK_POSSIBLE_LIB_PATHS IF(WIN32) GET_FILENAME_COMPONENT( - ActiveTcl_CurrentVersion - "[HKEY_LOCAL_MACHINE\\SOFTWARE\\ActiveState\\ActiveTcl;CurrentVersion]" + ActiveTcl_CurrentVersion + "[HKEY_LOCAL_MACHINE\\SOFTWARE\\ActiveState\\ActiveTcl;CurrentVersion]" NAME) SET(TCLTK_POSSIBLE_LIB_PATHS ${TCLTK_POSSIBLE_LIB_PATHS} "[HKEY_LOCAL_MACHINE\\SOFTWARE\\ActiveState\\ActiveTcl\\${ActiveTcl_CurrentVersion}]/lib" @@ -98,33 +98,33 @@ IF(WIN32) "[HKEY_LOCAL_MACHINE\\SOFTWARE\\Scriptics\\Tcl\\8.2;Root]/lib" "[HKEY_LOCAL_MACHINE\\SOFTWARE\\Scriptics\\Tcl\\8.0;Root]/lib" "$ENV{ProgramFiles}/Tcl/Lib" - "C:/Program Files/Tcl/lib" - "C:/Tcl/lib" + "C:/Program Files/Tcl/lib" + "C:/Tcl/lib" ) ENDIF(WIN32) FIND_LIBRARY(TCL_LIBRARY - NAMES - tcl + NAMES + tcl tcl${TCL_LIBRARY_VERSION} tcl${TCL_TCLSH_VERSION} tcl${TK_WISH_VERSION} - tcl86 tcl8.6 - tcl85 tcl8.5 - tcl84 tcl8.4 - tcl83 tcl8.3 - tcl82 tcl8.2 + tcl86 tcl8.6 + tcl85 tcl8.5 + tcl84 tcl8.4 + tcl83 tcl8.3 + tcl82 tcl8.2 tcl80 tcl8.0 PATHS ${TCLTK_POSSIBLE_LIB_PATHS} ) -FIND_LIBRARY(TK_LIBRARY - NAMES +FIND_LIBRARY(TK_LIBRARY + NAMES tk tk${TK_LIBRARY_VERSION} tk${TCL_TCLSH_VERSION} tk${TK_WISH_VERSION} tk86 tk8.6 - tk85 tk8.5 - tk84 tk8.4 - tk83 tk8.3 - tk82 tk8.2 + tk85 tk8.5 + tk84 tk8.4 + tk83 tk8.3 + tk82 tk8.2 tk80 tk8.0 PATHS ${TCLTK_POSSIBLE_LIB_PATHS} ) @@ -156,8 +156,8 @@ SET(TCLTK_POSSIBLE_INCLUDE_PATHS "${TK_LIBRARY_PATH_PARENT}/include" "${TCL_INCLUDE_PATH}" "${TK_INCLUDE_PATH}" - ${TCL_FRAMEWORK_INCLUDES} - ${TK_FRAMEWORK_INCLUDES} + ${TCL_FRAMEWORK_INCLUDES} + ${TK_FRAMEWORK_INCLUDES} "${TCL_TCLSH_PATH_PARENT}/include" "${TK_WISH_PATH_PARENT}/include" /usr/include/tcl${TK_LIBRARY_VERSION} @@ -185,17 +185,17 @@ IF(WIN32) ) ENDIF(WIN32) -FIND_PATH(TCL_INCLUDE_PATH +FIND_PATH(TCL_INCLUDE_PATH NAMES tcl.h HINTS ${TCLTK_POSSIBLE_INCLUDE_PATHS} ) -FIND_PATH(TK_INCLUDE_PATH +FIND_PATH(TK_INCLUDE_PATH NAMES tk.h HINTS ${TCLTK_POSSIBLE_INCLUDE_PATHS} ) -# handle the QUIETLY and REQUIRED arguments and set TCL_FOUND to TRUE if +# handle the QUIETLY and REQUIRED arguments and set TCL_FOUND to TRUE if # all listed variables are TRUE INCLUDE(${CMAKE_CURRENT_LIST_DIR}/FindPackageHandleStandardArgs.cmake) diff --git a/Modules/FindTIFF.cmake b/Modules/FindTIFF.cmake index 16f9e23..be410fd 100644 --- a/Modules/FindTIFF.cmake +++ b/Modules/FindTIFF.cmake @@ -34,7 +34,7 @@ IF(TIFF_INCLUDE_DIR AND EXISTS "${TIFF_INCLUDE_DIR}/tiffvers.h") UNSET(tiff_version_str) ENDIF() -# handle the QUIETLY and REQUIRED arguments and set TIFF_FOUND to TRUE if +# handle the QUIETLY and REQUIRED arguments and set TIFF_FOUND to TRUE if # all listed variables are TRUE INCLUDE(${CMAKE_CURRENT_LIST_DIR}/FindPackageHandleStandardArgs.cmake) FIND_PACKAGE_HANDLE_STANDARD_ARGS(TIFF diff --git a/Modules/FindTclStub.cmake b/Modules/FindTclStub.cmake index 79d14ae..1e83508 100644 --- a/Modules/FindTclStub.cmake +++ b/Modules/FindTclStub.cmake @@ -14,11 +14,11 @@ # who are not necessarily Tcl/Tk gurus/developpers, some variables were # moved or removed. Changes compared to CMake 2.4 are: # - TCL_STUB_LIBRARY_DEBUG and TK_STUB_LIBRARY_DEBUG were removed. -# => these libs are not packaged by default with Tcl/Tk distributions. +# => these libs are not packaged by default with Tcl/Tk distributions. # Even when Tcl/Tk is built from source, several flavors of debug libs # are created and there is no real reason to pick a single one -# specifically (say, amongst tclstub84g, tclstub84gs, or tclstub84sgx). -# Let's leave that choice to the user by allowing him to assign +# specifically (say, amongst tclstub84g, tclstub84gs, or tclstub84sgx). +# Let's leave that choice to the user by allowing him to assign # TCL_STUB_LIBRARY to any Tcl library, debug or not. #============================================================================= @@ -38,12 +38,12 @@ INCLUDE(FindTCL) GET_FILENAME_COMPONENT(TCL_TCLSH_PATH "${TCL_TCLSH}" PATH) GET_FILENAME_COMPONENT(TCL_TCLSH_PATH_PARENT "${TCL_TCLSH_PATH}" PATH) -STRING(REGEX REPLACE +STRING(REGEX REPLACE "^.*tclsh([0-9]\\.*[0-9]).*$" "\\1" TCL_TCLSH_VERSION "${TCL_TCLSH}") GET_FILENAME_COMPONENT(TK_WISH_PATH "${TK_WISH}" PATH) GET_FILENAME_COMPONENT(TK_WISH_PATH_PARENT "${TK_WISH_PATH}" PATH) -STRING(REGEX REPLACE +STRING(REGEX REPLACE "^.*wish([0-9]\\.*[0-9]).*$" "\\1" TK_WISH_VERSION "${TK_WISH}") GET_FILENAME_COMPONENT(TCL_INCLUDE_PATH_PARENT "${TCL_INCLUDE_PATH}" PATH) @@ -51,12 +51,12 @@ GET_FILENAME_COMPONENT(TK_INCLUDE_PATH_PARENT "${TK_INCLUDE_PATH}" PATH) GET_FILENAME_COMPONENT(TCL_LIBRARY_PATH "${TCL_LIBRARY}" PATH) GET_FILENAME_COMPONENT(TCL_LIBRARY_PATH_PARENT "${TCL_LIBRARY_PATH}" PATH) -STRING(REGEX REPLACE +STRING(REGEX REPLACE "^.*tcl([0-9]\\.*[0-9]).*$" "\\1" TCL_LIBRARY_VERSION "${TCL_LIBRARY}") GET_FILENAME_COMPONENT(TK_LIBRARY_PATH "${TK_LIBRARY}" PATH) GET_FILENAME_COMPONENT(TK_LIBRARY_PATH_PARENT "${TK_LIBRARY_PATH}" PATH) -STRING(REGEX REPLACE +STRING(REGEX REPLACE "^.*tk([0-9]\\.*[0-9]).*$" "\\1" TK_LIBRARY_VERSION "${TK_LIBRARY}") SET(TCLTK_POSSIBLE_LIB_PATHS @@ -70,8 +70,8 @@ SET(TCLTK_POSSIBLE_LIB_PATHS IF(WIN32) GET_FILENAME_COMPONENT( - ActiveTcl_CurrentVersion - "[HKEY_LOCAL_MACHINE\\SOFTWARE\\ActiveState\\ActiveTcl;CurrentVersion]" + ActiveTcl_CurrentVersion + "[HKEY_LOCAL_MACHINE\\SOFTWARE\\ActiveState\\ActiveTcl;CurrentVersion]" NAME) SET(TCLTK_POSSIBLE_LIB_PATHS ${TCLTK_POSSIBLE_LIB_PATHS} "[HKEY_LOCAL_MACHINE\\SOFTWARE\\ActiveState\\ActiveTcl\\${ActiveTcl_CurrentVersion}]/lib" @@ -82,45 +82,45 @@ IF(WIN32) "[HKEY_LOCAL_MACHINE\\SOFTWARE\\Scriptics\\Tcl\\8.2;Root]/lib" "[HKEY_LOCAL_MACHINE\\SOFTWARE\\Scriptics\\Tcl\\8.0;Root]/lib" "$ENV{ProgramFiles}/Tcl/Lib" - "C:/Program Files/Tcl/lib" - "C:/Tcl/lib" + "C:/Program Files/Tcl/lib" + "C:/Tcl/lib" ) ENDIF(WIN32) FIND_LIBRARY(TCL_STUB_LIBRARY - NAMES - tclstub + NAMES + tclstub tclstub${TK_LIBRARY_VERSION} tclstub${TCL_TCLSH_VERSION} tclstub${TK_WISH_VERSION} tclstub86 tclstub8.6 - tclstub85 tclstub8.5 - tclstub84 tclstub8.4 - tclstub83 tclstub8.3 - tclstub82 tclstub8.2 + tclstub85 tclstub8.5 + tclstub84 tclstub8.4 + tclstub83 tclstub8.3 + tclstub82 tclstub8.2 tclstub80 tclstub8.0 PATHS ${TCLTK_POSSIBLE_LIB_PATHS} ) -FIND_LIBRARY(TK_STUB_LIBRARY - NAMES - tkstub +FIND_LIBRARY(TK_STUB_LIBRARY + NAMES + tkstub tkstub${TCL_LIBRARY_VERSION} tkstub${TCL_TCLSH_VERSION} tkstub${TK_WISH_VERSION} tkstub86 tkstub8.6 - tkstub85 tkstub8.5 - tkstub84 tkstub8.4 - tkstub83 tkstub8.3 - tkstub82 tkstub8.2 + tkstub85 tkstub8.5 + tkstub84 tkstub8.4 + tkstub83 tkstub8.3 + tkstub82 tkstub8.2 tkstub80 tkstub8.0 PATHS ${TCLTK_POSSIBLE_LIB_PATHS} ) -FIND_LIBRARY(TTK_STUB_LIBRARY - NAMES - ttkstub +FIND_LIBRARY(TTK_STUB_LIBRARY + NAMES + ttkstub ttkstub${TCL_LIBRARY_VERSION} ttkstub${TCL_TCLSH_VERSION} ttkstub${TK_WISH_VERSION} ttkstub88 ttkstub8.8 ttkstub87 ttkstub8.7 ttkstub86 ttkstub8.6 - ttkstub85 ttkstub8.5 + ttkstub85 ttkstub8.5 PATHS ${TCLTK_POSSIBLE_LIB_PATHS} ) diff --git a/Modules/FindTclsh.cmake b/Modules/FindTclsh.cmake index a45f285..fdeafff 100644 --- a/Modules/FindTclsh.cmake +++ b/Modules/FindTclsh.cmake @@ -26,7 +26,7 @@ ENDIF(CYGWIN) GET_FILENAME_COMPONENT(TK_WISH_PATH "${TK_WISH}" PATH) GET_FILENAME_COMPONENT(TK_WISH_PATH_PARENT "${TK_WISH_PATH}" PATH) -STRING(REGEX REPLACE +STRING(REGEX REPLACE "^.*wish([0-9]\\.*[0-9]).*$" "\\1" TK_WISH_VERSION "${TK_WISH}") GET_FILENAME_COMPONENT(TCL_INCLUDE_PATH_PARENT "${TCL_INCLUDE_PATH}" PATH) @@ -34,12 +34,12 @@ GET_FILENAME_COMPONENT(TK_INCLUDE_PATH_PARENT "${TK_INCLUDE_PATH}" PATH) GET_FILENAME_COMPONENT(TCL_LIBRARY_PATH "${TCL_LIBRARY}" PATH) GET_FILENAME_COMPONENT(TCL_LIBRARY_PATH_PARENT "${TCL_LIBRARY_PATH}" PATH) -STRING(REGEX REPLACE +STRING(REGEX REPLACE "^.*tcl([0-9]\\.*[0-9]).*$" "\\1" TCL_LIBRARY_VERSION "${TCL_LIBRARY}") GET_FILENAME_COMPONENT(TK_LIBRARY_PATH "${TK_LIBRARY}" PATH) GET_FILENAME_COMPONENT(TK_LIBRARY_PATH_PARENT "${TK_LIBRARY_PATH}" PATH) -STRING(REGEX REPLACE +STRING(REGEX REPLACE "^.*tk([0-9]\\.*[0-9]).*$" "\\1" TK_LIBRARY_VERSION "${TK_LIBRARY}") SET(TCLTK_POSSIBLE_BIN_PATHS @@ -52,8 +52,8 @@ SET(TCLTK_POSSIBLE_BIN_PATHS IF(WIN32) GET_FILENAME_COMPONENT( - ActiveTcl_CurrentVersion - "[HKEY_LOCAL_MACHINE\\SOFTWARE\\ActiveState\\ActiveTcl;CurrentVersion]" + ActiveTcl_CurrentVersion + "[HKEY_LOCAL_MACHINE\\SOFTWARE\\ActiveState\\ActiveTcl;CurrentVersion]" NAME) SET(TCLTK_POSSIBLE_BIN_PATHS ${TCLTK_POSSIBLE_BIN_PATHS} "[HKEY_LOCAL_MACHINE\\SOFTWARE\\ActiveState\\ActiveTcl\\${ActiveTcl_CurrentVersion}]/bin" @@ -90,7 +90,7 @@ IF(TCL_TCLSH) OUTPUT_STRIP_TRAILING_WHITESPACE) ENDIF(TCL_TCLSH) -# handle the QUIETLY and REQUIRED arguments and set TIFF_FOUND to TRUE if +# handle the QUIETLY and REQUIRED arguments and set TIFF_FOUND to TRUE if # all listed variables are TRUE INCLUDE(${CMAKE_CURRENT_LIST_DIR}/FindPackageHandleStandardArgs.cmake) FIND_PACKAGE_HANDLE_STANDARD_ARGS(Tclsh diff --git a/Modules/FindThreads.cmake b/Modules/FindThreads.cmake index 21614fb..bb1ba3c 100644 --- a/Modules/FindThreads.cmake +++ b/Modules/FindThreads.cmake @@ -98,14 +98,14 @@ ELSE() MESSAGE(STATUS "Check if compiler accepts -pthread - yes") ELSE() MESSAGE(STATUS "Check if compiler accepts -pthread - no") - FILE(APPEND - ${CMAKE_BINARY_DIR}${CMAKE_FILES_DIRECTORY}/CMakeError.log + FILE(APPEND + ${CMAKE_BINARY_DIR}${CMAKE_FILES_DIRECTORY}/CMakeError.log "Determining if compiler accepts -pthread returned ${THREADS_PTHREAD_ARG} instead of 2. The compiler had the following output:\n${OUTPUT}\n\n") ENDIF() ELSE() MESSAGE(STATUS "Check if compiler accepts -pthread - no") - FILE(APPEND - ${CMAKE_BINARY_DIR}${CMAKE_FILES_DIRECTORY}/CMakeError.log + FILE(APPEND + ${CMAKE_BINARY_DIR}${CMAKE_FILES_DIRECTORY}/CMakeError.log "Determining if compiler accepts -pthread failed with the following output:\n${OUTPUT}\n\n") ENDIF() diff --git a/Modules/FindUnixCommands.cmake b/Modules/FindUnixCommands.cmake index 9c0264d..4ada05c 100644 --- a/Modules/FindUnixCommands.cmake +++ b/Modules/FindUnixCommands.cmake @@ -21,7 +21,7 @@ FIND_PROGRAM(BASH bash ${CYGWIN_INSTALL_PATH}/bin /bin - /usr/bin + /usr/bin /usr/local/bin /sbin ) @@ -33,7 +33,7 @@ FIND_PROGRAM(CP cp ${CYGWIN_INSTALL_PATH}/bin /bin - /usr/bin + /usr/bin /usr/local/bin /sbin ) @@ -45,7 +45,7 @@ FIND_PROGRAM(GZIP gzip ${CYGWIN_INSTALL_PATH}/bin /bin - /usr/bin + /usr/bin /usr/local/bin /sbin ) @@ -57,7 +57,7 @@ FIND_PROGRAM(MV mv ${CYGWIN_INSTALL_PATH}/bin /bin - /usr/bin + /usr/bin /usr/local/bin /sbin ) @@ -69,7 +69,7 @@ FIND_PROGRAM(RM rm ${CYGWIN_INSTALL_PATH}/bin /bin - /usr/bin + /usr/bin /usr/local/bin /sbin ) @@ -78,13 +78,13 @@ MARK_AS_ADVANCED( ) FIND_PROGRAM(TAR - NAMES - tar + NAMES + tar gtar PATH ${CYGWIN_INSTALL_PATH}/bin /bin - /usr/bin + /usr/bin /usr/local/bin /sbin ) diff --git a/Modules/FindVTK.cmake b/Modules/FindVTK.cmake index 6b1772f..fbdac7f 100644 --- a/Modules/FindVTK.cmake +++ b/Modules/FindVTK.cmake @@ -4,26 +4,26 @@ # VTK_FOUND - Set to true when VTK is found. # VTK_USE_FILE - CMake file to use VTK. # VTK_MAJOR_VERSION - The VTK major version number. -# VTK_MINOR_VERSION - The VTK minor version number +# VTK_MINOR_VERSION - The VTK minor version number # (odd non-release). -# VTK_BUILD_VERSION - The VTK patch level +# VTK_BUILD_VERSION - The VTK patch level # (meaningless for odd minor). # VTK_INCLUDE_DIRS - Include directories for VTK # VTK_LIBRARY_DIRS - Link directories for VTK libraries -# VTK_KITS - List of VTK kits, in CAPS +# VTK_KITS - List of VTK kits, in CAPS # (COMMON,IO,) etc. # VTK_LANGUAGES - List of wrapped languages, in CAPS # (TCL, PYHTON,) etc. # The following cache entries must be set by the user to locate VTK: -# VTK_DIR - The directory containing VTKConfig.cmake. +# VTK_DIR - The directory containing VTKConfig.cmake. # This is either the root of the build tree, -# or the lib/vtk directory. This is the +# or the lib/vtk directory. This is the # only cache entry. # The following variables are set for backward compatibility and # should not be used in new code: # USE_VTK_FILE - The full path to the UseVTK.cmake file. -# This is provided for backward -# compatibility. Use VTK_USE_FILE +# This is provided for backward +# compatibility. Use VTK_USE_FILE # instead. # diff --git a/Modules/FindWget.cmake b/Modules/FindWget.cmake index c94132c..ee4057d 100644 --- a/Modules/FindWget.cmake +++ b/Modules/FindWget.cmake @@ -1,5 +1,5 @@ # - Find wget -# This module looks for wget. This module defines the +# This module looks for wget. This module defines the # following values: # WGET_EXECUTABLE: the full path to the wget tool. # WGET_FOUND: True if wget has been found. @@ -24,7 +24,7 @@ FIND_PROGRAM(WGET_EXECUTABLE ${CYGWIN_INSTALL_PATH}/bin ) -# handle the QUIETLY and REQUIRED arguments and set WGET_FOUND to TRUE if +# handle the QUIETLY and REQUIRED arguments and set WGET_FOUND to TRUE if # all listed variables are TRUE INCLUDE(${CMAKE_CURRENT_LIST_DIR}/FindPackageHandleStandardArgs.cmake) FIND_PACKAGE_HANDLE_STANDARD_ARGS(Wget DEFAULT_MSG WGET_EXECUTABLE) diff --git a/Modules/FindWish.cmake b/Modules/FindWish.cmake index a4960cd..8a1cd8d 100644 --- a/Modules/FindWish.cmake +++ b/Modules/FindWish.cmake @@ -26,7 +26,7 @@ ENDIF(UNIX) GET_FILENAME_COMPONENT(TCL_TCLSH_PATH "${TCL_TCLSH}" PATH) GET_FILENAME_COMPONENT(TCL_TCLSH_PATH_PARENT "${TCL_TCLSH_PATH}" PATH) -STRING(REGEX REPLACE +STRING(REGEX REPLACE "^.*tclsh([0-9]\\.*[0-9]).*$" "\\1" TCL_TCLSH_VERSION "${TCL_TCLSH}") GET_FILENAME_COMPONENT(TCL_INCLUDE_PATH_PARENT "${TCL_INCLUDE_PATH}" PATH) @@ -34,12 +34,12 @@ GET_FILENAME_COMPONENT(TK_INCLUDE_PATH_PARENT "${TK_INCLUDE_PATH}" PATH) GET_FILENAME_COMPONENT(TCL_LIBRARY_PATH "${TCL_LIBRARY}" PATH) GET_FILENAME_COMPONENT(TCL_LIBRARY_PATH_PARENT "${TCL_LIBRARY_PATH}" PATH) -STRING(REGEX REPLACE +STRING(REGEX REPLACE "^.*tcl([0-9]\\.*[0-9]).*$" "\\1" TCL_LIBRARY_VERSION "${TCL_LIBRARY}") GET_FILENAME_COMPONENT(TK_LIBRARY_PATH "${TK_LIBRARY}" PATH) GET_FILENAME_COMPONENT(TK_LIBRARY_PATH_PARENT "${TK_LIBRARY_PATH}" PATH) -STRING(REGEX REPLACE +STRING(REGEX REPLACE "^.*tk([0-9]\\.*[0-9]).*$" "\\1" TK_LIBRARY_VERSION "${TK_LIBRARY}") SET(TCLTK_POSSIBLE_BIN_PATHS @@ -52,8 +52,8 @@ SET(TCLTK_POSSIBLE_BIN_PATHS IF(WIN32) GET_FILENAME_COMPONENT( - ActiveTcl_CurrentVersion - "[HKEY_LOCAL_MACHINE\\SOFTWARE\\ActiveState\\ActiveTcl;CurrentVersion]" + ActiveTcl_CurrentVersion + "[HKEY_LOCAL_MACHINE\\SOFTWARE\\ActiveState\\ActiveTcl;CurrentVersion]" NAME) SET(TCLTK_POSSIBLE_BIN_PATHS ${TCLTK_POSSIBLE_BIN_PATHS} "[HKEY_LOCAL_MACHINE\\SOFTWARE\\ActiveState\\ActiveTcl\\${ActiveTcl_CurrentVersion}]/bin" @@ -67,13 +67,13 @@ IF(WIN32) ENDIF(WIN32) SET(TK_WISH_NAMES - wish + wish wish${TCL_LIBRARY_VERSION} wish${TK_LIBRARY_VERSION} wish${TCL_TCLSH_VERSION} wish86 wish8.6 - wish85 wish8.5 - wish84 wish8.4 - wish83 wish8.3 - wish82 wish8.2 + wish85 wish8.5 + wish84 wish8.4 + wish83 wish8.3 + wish82 wish8.2 wish80 wish8.0 ) diff --git a/Modules/FindZLIB.cmake b/Modules/FindZLIB.cmake index 166e291..e42b5a4 100644 --- a/Modules/FindZLIB.cmake +++ b/Modules/FindZLIB.cmake @@ -79,7 +79,7 @@ IF(ZLIB_INCLUDE_DIR AND EXISTS "${ZLIB_INCLUDE_DIR}/zlib.h") SET(ZLIB_PATCH_VERSION "${ZLIB_VERSION_PATCH}") ENDIF() -# handle the QUIETLY and REQUIRED arguments and set ZLIB_FOUND to TRUE if +# handle the QUIETLY and REQUIRED arguments and set ZLIB_FOUND to TRUE if # all listed variables are TRUE INCLUDE(${CMAKE_CURRENT_LIST_DIR}/FindPackageHandleStandardArgs.cmake) FIND_PACKAGE_HANDLE_STANDARD_ARGS(ZLIB REQUIRED_VARS ZLIB_LIBRARY ZLIB_INCLUDE_DIR diff --git a/Modules/Findosg.cmake b/Modules/Findosg.cmake index 0106372..fb7421e 100644 --- a/Modules/Findosg.cmake +++ b/Modules/Findosg.cmake @@ -3,16 +3,16 @@ # introduced in CMake 2.6.3 and not use this Find module directly. # # This is part of the Findosg* suite used to find OpenSceneGraph components. -# Each component is separate and you must opt in to each module. You must -# also opt into OpenGL and OpenThreads (and Producer if needed) as these -# modules won't do it for you. This is to allow you control over your own +# Each component is separate and you must opt in to each module. You must +# also opt into OpenGL and OpenThreads (and Producer if needed) as these +# modules won't do it for you. This is to allow you control over your own # system piece by piece in case you need to opt out of certain components # or change the Find behavior for a particular module (perhaps because the # default FindOpenGL.cmake module doesn't work with your system as an # example). # If you want to use a more convenient module that includes everything, # use the FindOpenSceneGraph.cmake instead of the Findosg*.cmake modules. -# +# # Locate osg # This module defines # diff --git a/Modules/FindosgAnimation.cmake b/Modules/FindosgAnimation.cmake index b9b44a0..1c8eb50 100644 --- a/Modules/FindosgAnimation.cmake +++ b/Modules/FindosgAnimation.cmake @@ -1,14 +1,14 @@ # This is part of the Findosg* suite used to find OpenSceneGraph components. -# Each component is separate and you must opt in to each module. You must -# also opt into OpenGL and OpenThreads (and Producer if needed) as these -# modules won't do it for you. This is to allow you control over your own +# Each component is separate and you must opt in to each module. You must +# also opt into OpenGL and OpenThreads (and Producer if needed) as these +# modules won't do it for you. This is to allow you control over your own # system piece by piece in case you need to opt out of certain components # or change the Find behavior for a particular module (perhaps because the # default FindOpenGL.cmake module doesn't work with your system as an # example). # If you want to use a more convenient module that includes everything, # use the FindOpenSceneGraph.cmake instead of the Findosg*.cmake modules. -# +# # Locate osgAnimation # This module defines # diff --git a/Modules/FindosgDB.cmake b/Modules/FindosgDB.cmake index eabdde7..76272aa 100644 --- a/Modules/FindosgDB.cmake +++ b/Modules/FindosgDB.cmake @@ -1,14 +1,14 @@ # This is part of the Findosg* suite used to find OpenSceneGraph components. -# Each component is separate and you must opt in to each module. You must -# also opt into OpenGL and OpenThreads (and Producer if needed) as these -# modules won't do it for you. This is to allow you control over your own +# Each component is separate and you must opt in to each module. You must +# also opt into OpenGL and OpenThreads (and Producer if needed) as these +# modules won't do it for you. This is to allow you control over your own # system piece by piece in case you need to opt out of certain components # or change the Find behavior for a particular module (perhaps because the # default FindOpenGL.cmake module doesn't work with your system as an # example). # If you want to use a more convenient module that includes everything, # use the FindOpenSceneGraph.cmake instead of the Findosg*.cmake modules. -# +# # Locate osgDB # This module defines # diff --git a/Modules/FindosgFX.cmake b/Modules/FindosgFX.cmake index 81d5af5..3314750 100644 --- a/Modules/FindosgFX.cmake +++ b/Modules/FindosgFX.cmake @@ -1,14 +1,14 @@ # This is part of the Findosg* suite used to find OpenSceneGraph components. -# Each component is separate and you must opt in to each module. You must -# also opt into OpenGL and OpenThreads (and Producer if needed) as these -# modules won't do it for you. This is to allow you control over your own +# Each component is separate and you must opt in to each module. You must +# also opt into OpenGL and OpenThreads (and Producer if needed) as these +# modules won't do it for you. This is to allow you control over your own # system piece by piece in case you need to opt out of certain components # or change the Find behavior for a particular module (perhaps because the # default FindOpenGL.cmake module doesn't work with your system as an # example). # If you want to use a more convenient module that includes everything, # use the FindOpenSceneGraph.cmake instead of the Findosg*.cmake modules. -# +# # Locate osgFX # This module defines # diff --git a/Modules/FindosgGA.cmake b/Modules/FindosgGA.cmake index a4fe79b..fd9317d 100644 --- a/Modules/FindosgGA.cmake +++ b/Modules/FindosgGA.cmake @@ -1,14 +1,14 @@ # This is part of the Findosg* suite used to find OpenSceneGraph components. -# Each component is separate and you must opt in to each module. You must -# also opt into OpenGL and OpenThreads (and Producer if needed) as these -# modules won't do it for you. This is to allow you control over your own +# Each component is separate and you must opt in to each module. You must +# also opt into OpenGL and OpenThreads (and Producer if needed) as these +# modules won't do it for you. This is to allow you control over your own # system piece by piece in case you need to opt out of certain components # or change the Find behavior for a particular module (perhaps because the # default FindOpenGL.cmake module doesn't work with your system as an # example). # If you want to use a more convenient module that includes everything, # use the FindOpenSceneGraph.cmake instead of the Findosg*.cmake modules. -# +# # Locate osgGA # This module defines # diff --git a/Modules/FindosgIntrospection.cmake b/Modules/FindosgIntrospection.cmake index 24e6ed5..2394c05 100644 --- a/Modules/FindosgIntrospection.cmake +++ b/Modules/FindosgIntrospection.cmake @@ -1,14 +1,14 @@ # This is part of the Findosg* suite used to find OpenSceneGraph components. -# Each component is separate and you must opt in to each module. You must -# also opt into OpenGL and OpenThreads (and Producer if needed) as these -# modules won't do it for you. This is to allow you control over your own +# Each component is separate and you must opt in to each module. You must +# also opt into OpenGL and OpenThreads (and Producer if needed) as these +# modules won't do it for you. This is to allow you control over your own # system piece by piece in case you need to opt out of certain components # or change the Find behavior for a particular module (perhaps because the # default FindOpenGL.cmake module doesn't work with your system as an # example). # If you want to use a more convenient module that includes everything, # use the FindOpenSceneGraph.cmake instead of the Findosg*.cmake modules. -# +# # Locate osgINTROSPECTION # This module defines # diff --git a/Modules/FindosgManipulator.cmake b/Modules/FindosgManipulator.cmake index f71b5fd..9e58570 100644 --- a/Modules/FindosgManipulator.cmake +++ b/Modules/FindosgManipulator.cmake @@ -1,14 +1,14 @@ # This is part of the Findosg* suite used to find OpenSceneGraph components. -# Each component is separate and you must opt in to each module. You must -# also opt into OpenGL and OpenThreads (and Producer if needed) as these -# modules won't do it for you. This is to allow you control over your own +# Each component is separate and you must opt in to each module. You must +# also opt into OpenGL and OpenThreads (and Producer if needed) as these +# modules won't do it for you. This is to allow you control over your own # system piece by piece in case you need to opt out of certain components # or change the Find behavior for a particular module (perhaps because the # default FindOpenGL.cmake module doesn't work with your system as an # example). # If you want to use a more convenient module that includes everything, # use the FindOpenSceneGraph.cmake instead of the Findosg*.cmake modules. -# +# # Locate osgManipulator # This module defines # diff --git a/Modules/FindosgParticle.cmake b/Modules/FindosgParticle.cmake index f23a83f..2f93389 100644 --- a/Modules/FindosgParticle.cmake +++ b/Modules/FindosgParticle.cmake @@ -1,14 +1,14 @@ # This is part of the Findosg* suite used to find OpenSceneGraph components. -# Each component is separate and you must opt in to each module. You must -# also opt into OpenGL and OpenThreads (and Producer if needed) as these -# modules won't do it for you. This is to allow you control over your own +# Each component is separate and you must opt in to each module. You must +# also opt into OpenGL and OpenThreads (and Producer if needed) as these +# modules won't do it for you. This is to allow you control over your own # system piece by piece in case you need to opt out of certain components # or change the Find behavior for a particular module (perhaps because the # default FindOpenGL.cmake module doesn't work with your system as an # example). # If you want to use a more convenient module that includes everything, # use the FindOpenSceneGraph.cmake instead of the Findosg*.cmake modules. -# +# # Locate osgParticle # This module defines # diff --git a/Modules/FindosgProducer.cmake b/Modules/FindosgProducer.cmake index 51f6090..2c3800b 100644 --- a/Modules/FindosgProducer.cmake +++ b/Modules/FindosgProducer.cmake @@ -1,14 +1,14 @@ # This is part of the Findosg* suite used to find OpenSceneGraph components. -# Each component is separate and you must opt in to each module. You must -# also opt into OpenGL and OpenThreads (and Producer if needed) as these -# modules won't do it for you. This is to allow you control over your own +# Each component is separate and you must opt in to each module. You must +# also opt into OpenGL and OpenThreads (and Producer if needed) as these +# modules won't do it for you. This is to allow you control over your own # system piece by piece in case you need to opt out of certain components # or change the Find behavior for a particular module (perhaps because the # default FindOpenGL.cmake module doesn't work with your system as an # example). # If you want to use a more convenient module that includes everything, # use the FindOpenSceneGraph.cmake instead of the Findosg*.cmake modules. -# +# # Locate osgProducer # This module defines # diff --git a/Modules/FindosgShadow.cmake b/Modules/FindosgShadow.cmake index 278f8ae..ca87b56 100644 --- a/Modules/FindosgShadow.cmake +++ b/Modules/FindosgShadow.cmake @@ -1,14 +1,14 @@ # This is part of the Findosg* suite used to find OpenSceneGraph components. -# Each component is separate and you must opt in to each module. You must -# also opt into OpenGL and OpenThreads (and Producer if needed) as these -# modules won't do it for you. This is to allow you control over your own +# Each component is separate and you must opt in to each module. You must +# also opt into OpenGL and OpenThreads (and Producer if needed) as these +# modules won't do it for you. This is to allow you control over your own # system piece by piece in case you need to opt out of certain components # or change the Find behavior for a particular module (perhaps because the # default FindOpenGL.cmake module doesn't work with your system as an # example). # If you want to use a more convenient module that includes everything, # use the FindOpenSceneGraph.cmake instead of the Findosg*.cmake modules. -# +# # Locate osgShadow # This module defines # diff --git a/Modules/FindosgSim.cmake b/Modules/FindosgSim.cmake index 15daf64..2fc5105 100644 --- a/Modules/FindosgSim.cmake +++ b/Modules/FindosgSim.cmake @@ -1,14 +1,14 @@ # This is part of the Findosg* suite used to find OpenSceneGraph components. -# Each component is separate and you must opt in to each module. You must -# also opt into OpenGL and OpenThreads (and Producer if needed) as these -# modules won't do it for you. This is to allow you control over your own +# Each component is separate and you must opt in to each module. You must +# also opt into OpenGL and OpenThreads (and Producer if needed) as these +# modules won't do it for you. This is to allow you control over your own # system piece by piece in case you need to opt out of certain components # or change the Find behavior for a particular module (perhaps because the # default FindOpenGL.cmake module doesn't work with your system as an # example). # If you want to use a more convenient module that includes everything, # use the FindOpenSceneGraph.cmake instead of the Findosg*.cmake modules. -# +# # Locate osgSim # This module defines # diff --git a/Modules/FindosgTerrain.cmake b/Modules/FindosgTerrain.cmake index fbf373e..eafd8fb 100644 --- a/Modules/FindosgTerrain.cmake +++ b/Modules/FindosgTerrain.cmake @@ -1,14 +1,14 @@ # This is part of the Findosg* suite used to find OpenSceneGraph components. -# Each component is separate and you must opt in to each module. You must -# also opt into OpenGL and OpenThreads (and Producer if needed) as these -# modules won't do it for you. This is to allow you control over your own +# Each component is separate and you must opt in to each module. You must +# also opt into OpenGL and OpenThreads (and Producer if needed) as these +# modules won't do it for you. This is to allow you control over your own # system piece by piece in case you need to opt out of certain components # or change the Find behavior for a particular module (perhaps because the # default FindOpenGL.cmake module doesn't work with your system as an # example). # If you want to use a more convenient module that includes everything, # use the FindOpenSceneGraph.cmake instead of the Findosg*.cmake modules. -# +# # Locate osgTerrain # This module defines # diff --git a/Modules/FindosgText.cmake b/Modules/FindosgText.cmake index 22f825f..57655b1 100644 --- a/Modules/FindosgText.cmake +++ b/Modules/FindosgText.cmake @@ -1,14 +1,14 @@ # This is part of the Findosg* suite used to find OpenSceneGraph components. -# Each component is separate and you must opt in to each module. You must -# also opt into OpenGL and OpenThreads (and Producer if needed) as these -# modules won't do it for you. This is to allow you control over your own +# Each component is separate and you must opt in to each module. You must +# also opt into OpenGL and OpenThreads (and Producer if needed) as these +# modules won't do it for you. This is to allow you control over your own # system piece by piece in case you need to opt out of certain components # or change the Find behavior for a particular module (perhaps because the # default FindOpenGL.cmake module doesn't work with your system as an # example). # If you want to use a more convenient module that includes everything, # use the FindOpenSceneGraph.cmake instead of the Findosg*.cmake modules. -# +# # Locate osgText # This module defines # diff --git a/Modules/FindosgUtil.cmake b/Modules/FindosgUtil.cmake index 05a74df..eeabc34 100644 --- a/Modules/FindosgUtil.cmake +++ b/Modules/FindosgUtil.cmake @@ -1,14 +1,14 @@ # This is part of the Findosg* suite used to find OpenSceneGraph components. -# Each component is separate and you must opt in to each module. You must -# also opt into OpenGL and OpenThreads (and Producer if needed) as these -# modules won't do it for you. This is to allow you control over your own +# Each component is separate and you must opt in to each module. You must +# also opt into OpenGL and OpenThreads (and Producer if needed) as these +# modules won't do it for you. This is to allow you control over your own # system piece by piece in case you need to opt out of certain components # or change the Find behavior for a particular module (perhaps because the # default FindOpenGL.cmake module doesn't work with your system as an # example). # If you want to use a more convenient module that includes everything, # use the FindOpenSceneGraph.cmake instead of the Findosg*.cmake modules. -# +# # Locate osgUtil # This module defines # diff --git a/Modules/FindosgViewer.cmake b/Modules/FindosgViewer.cmake index 650dbd7..2afd761 100644 --- a/Modules/FindosgViewer.cmake +++ b/Modules/FindosgViewer.cmake @@ -1,14 +1,14 @@ # This is part of the Findosg* suite used to find OpenSceneGraph components. -# Each component is separate and you must opt in to each module. You must -# also opt into OpenGL and OpenThreads (and Producer if needed) as these -# modules won't do it for you. This is to allow you control over your own +# Each component is separate and you must opt in to each module. You must +# also opt into OpenGL and OpenThreads (and Producer if needed) as these +# modules won't do it for you. This is to allow you control over your own # system piece by piece in case you need to opt out of certain components # or change the Find behavior for a particular module (perhaps because the # default FindOpenGL.cmake module doesn't work with your system as an # example). # If you want to use a more convenient module that includes everything, # use the FindOpenSceneGraph.cmake instead of the Findosg*.cmake modules. -# +# # Locate osgViewer # This module defines # diff --git a/Modules/FindosgVolume.cmake b/Modules/FindosgVolume.cmake index 3ad7edc..1fa6764 100644 --- a/Modules/FindosgVolume.cmake +++ b/Modules/FindosgVolume.cmake @@ -1,14 +1,14 @@ # This is part of the Findosg* suite used to find OpenSceneGraph components. -# Each component is separate and you must opt in to each module. You must -# also opt into OpenGL and OpenThreads (and Producer if needed) as these -# modules won't do it for you. This is to allow you control over your own +# Each component is separate and you must opt in to each module. You must +# also opt into OpenGL and OpenThreads (and Producer if needed) as these +# modules won't do it for you. This is to allow you control over your own # system piece by piece in case you need to opt out of certain components # or change the Find behavior for a particular module (perhaps because the # default FindOpenGL.cmake module doesn't work with your system as an # example). # If you want to use a more convenient module that includes everything, # use the FindOpenSceneGraph.cmake instead of the Findosg*.cmake modules. -# +# # Locate osgVolume # This module defines # diff --git a/Modules/FindosgWidget.cmake b/Modules/FindosgWidget.cmake index 206a8b7..1a51e60 100644 --- a/Modules/FindosgWidget.cmake +++ b/Modules/FindosgWidget.cmake @@ -1,14 +1,14 @@ # This is part of the Findosg* suite used to find OpenSceneGraph components. -# Each component is separate and you must opt in to each module. You must -# also opt into OpenGL and OpenThreads (and Producer if needed) as these -# modules won't do it for you. This is to allow you control over your own +# Each component is separate and you must opt in to each module. You must +# also opt into OpenGL and OpenThreads (and Producer if needed) as these +# modules won't do it for you. This is to allow you control over your own # system piece by piece in case you need to opt out of certain components # or change the Find behavior for a particular module (perhaps because the # default FindOpenGL.cmake module doesn't work with your system as an # example). # If you want to use a more convenient module that includes everything, # use the FindOpenSceneGraph.cmake instead of the Findosg*.cmake modules. -# +# # Locate osgWidget # This module defines # diff --git a/Modules/Findosg_functions.cmake b/Modules/Findosg_functions.cmake index ab836ff..3a40a09 100644 --- a/Modules/Findosg_functions.cmake +++ b/Modules/Findosg_functions.cmake @@ -85,7 +85,7 @@ function(OSG_FIND_LIBRARY module library) set(${module_uc}_LIBRARIES ${${module_uc}_LIBRARY} PARENT_SCOPE) else() # They really have a FOO_LIBRARY_DEBUG - set(${module_uc}_LIBRARIES + set(${module_uc}_LIBRARIES optimized ${${module_uc}_LIBRARY} debug ${${module_uc}_LIBRARY_DEBUG} PARENT_SCOPE diff --git a/Modules/FindwxWidgets.cmake b/Modules/FindwxWidgets.cmake index 865a6c5..bf45dc6 100644 --- a/Modules/FindwxWidgets.cmake +++ b/Modules/FindwxWidgets.cmake @@ -3,9 +3,9 @@ # configuration to use. wxWidgets is a modular library. To specify the # modules that you will use, you need to name them as components to # the package: -# +# # FIND_PACKAGE(wxWidgets COMPONENTS core base ...) -# +# # There are two search branches: a windows style and a unix style. For # windows, the following variables are searched for and set to # defaults in case of multiple choices. Change them if the defaults @@ -22,7 +22,7 @@ # - Set to TRUE to exclude linking of # commonly required libs (e.g., png tiff # jpeg zlib regex expat). -# +# # For unix style it uses the wx-config utility. You can select between # debug/release, unicode/ansi, universal/non-universal, and # static/shared in the QtDialog or ccmake interfaces by turning ON/OFF @@ -140,7 +140,7 @@ # FIXME: This and all the DBG_MSG calls should be removed after the # module stabilizes. -# +# # Helper macro to control the debugging output globally. There are # two versions for controlling how verbose your output should be. MACRO(DBG_MSG _MSG) @@ -418,7 +418,7 @@ IF(wxWidgets_FIND_STYLE STREQUAL "win32") #------------------------------------------------------------------- # Look for an installation tree. - FIND_PATH(wxWidgets_ROOT_DIR + FIND_PATH(wxWidgets_ROOT_DIR NAMES include/wx/wx.h PATHS $ENV{wxWidgets_ROOT_DIR} @@ -427,7 +427,7 @@ IF(wxWidgets_FIND_STYLE STREQUAL "win32") C:/ D:/ $ENV{ProgramFiles} - PATH_SUFFIXES + PATH_SUFFIXES wxWidgets-2.9.4 wxWidgets-2.9.3 wxWidgets-2.9.2 @@ -680,7 +680,7 @@ ELSE(wxWidgets_FIND_STYLE STREQUAL "win32") ENDIF(_wx_result_yes EQUAL 0 AND _wx_result_no EQUAL 0) ENDMACRO(WX_CONFIG_SELECT_QUERY_BOOL) - # + # # Set wxWidgets_SELECT_OPTIONS to wx-config options for selecting # among multiple builds. # @@ -845,12 +845,12 @@ FIND_PROGRAM(wxWidgets_wxrc_EXECUTABLE wxrc ${wxWidgets_ROOT_DIR}/utils/wxrc/vc_msw ) -# +# # WX_SPLIT_ARGUMENTS_ON(<keyword> <left> <right> <arg1> <arg2> ...) -# +# # Sets <left> and <right> to contain arguments to the left and right, # respectively, of <keyword>. -# +# # Example usage: # FUNCTION(WXWIDGETS_ADD_RESOURCES outfiles) # WX_SPLIT_ARGUMENTS_ON(OPTIONS wxrc_files wxrc_options ${ARGN}) @@ -858,7 +858,7 @@ FIND_PROGRAM(wxWidgets_wxrc_EXECUTABLE wxrc # ENDFUNCTION(WXWIDGETS_ADD_RESOURCES) # # WXWIDGETS_ADD_RESOURCES(sources ${xrc_files} OPTIONS -e -o file.C) -# +# # NOTE: This is a generic piece of code that should be renamed to # SPLIT_ARGUMENTS_ON and put in a file serving the same purpose as # FindPackageStandardArgs.cmake. At the time of this writing @@ -929,13 +929,13 @@ FUNCTION(WX_GET_DEPENDENCIES_FROM_XML SET(${_depends} ${${_depends}} PARENT_SCOPE) ENDFUNCTION(WX_GET_DEPENDENCIES_FROM_XML) -# +# # WXWIDGETS_ADD_RESOURCES(<sources> <xrc_files> # OPTIONS <options> [NO_CPP_CODE]) -# +# # Adds a custom command for resource file compilation of the # <xrc_files> and appends the output files to <sources>. -# +# # Example usages: # WXWIDGETS_ADD_RESOURCES(sources xrc/main_frame.xrc) # WXWIDGETS_ADD_RESOURCES(sources ${xrc_files} OPTIONS -e -o altname.cxx) @@ -986,7 +986,7 @@ FUNCTION(WXWIDGETS_ADD_RESOURCES _outfiles) # # Parse options. - # + # # If NO_CPP_CODE option specified, then produce .xrs file rather # than a .cpp file (i.e., don't add the default --cpp-code option). LIST(FIND rc_options NO_CPP_CODE index) @@ -1015,7 +1015,7 @@ FUNCTION(WXWIDGETS_ADD_RESOURCES _outfiles) ENDIF(outfile_opt) #STRING(REGEX REPLACE "--output=[^;]*;?" "" rc_options "${rc_options}") #STRING(REGEX REPLACE ";$" "" rc_options "${rc_options}") - + IF(NOT IS_ABSOLUTE "${outfile}") SET(outfile "${CMAKE_CURRENT_BINARY_DIR}/${outfile}") ENDIF(NOT IS_ABSOLUTE "${outfile}") diff --git a/Modules/MacroAddFileDependencies.cmake b/Modules/MacroAddFileDependencies.cmake index 527447b..36a217a 100644 --- a/Modules/MacroAddFileDependencies.cmake +++ b/Modules/MacroAddFileDependencies.cmake @@ -2,7 +2,7 @@ # Using the macro MACRO_ADD_FILE_DEPENDENCIES() is discouraged. There are usually # better ways to specify the correct dependencies. # -# MACRO_ADD_FILE_DEPENDENCIES(<_file> depend_files...) is just a convenience +# MACRO_ADD_FILE_DEPENDENCIES(<_file> depend_files...) is just a convenience # wrapper around the OBJECT_DEPENDS source file property. You can just # use SET_PROPERTY(SOURCE <file> APPEND PROPERTY OBJECT_DEPENDS depend_files) instead. diff --git a/Modules/NSIS.template.in b/Modules/NSIS.template.in index 43f72f6..7adfe14 100644 --- a/Modules/NSIS.template.in +++ b/Modules/NSIS.template.in @@ -37,7 +37,7 @@ ;Set compression SetCompressor @CPACK_NSIS_COMPRESSOR@ -@CPACK_NSIS_DEFINES@ +@CPACK_NSIS_DEFINES@ !include Sections.nsh @@ -71,7 +71,7 @@ Var AR_RegFlags ; This macro reads component installed flag from the registry and ;changes checked state of the section on the components page. ;Input: section index constant name specified in Section command. - + ClearErrors ;Reading component status from registry ReadRegDWORD $AR_RegFlags HKLM "Software\Microsoft\Windows\CurrentVersion\Uninstall\@CPACK_PACKAGE_INSTALL_REGISTRY_KEY@\Components\${SecName}" "Installed" @@ -86,20 +86,20 @@ Var AR_RegFlags ; Note whether this component was installed before !insertmacro StoreVar ${SecName}_was_installed $AR_RegFlags IntOp $R0 $AR_RegFlags & $AR_RegFlags - + ;Writing modified flags SectionSetFlags ${${SecName}} $AR_SecFlags - + "default_${SecName}:" !insertmacro LoadSectionSelectedIntoVar ${SecName} ${SecName}_selected !macroend - + !macro FinishSection SecName ; This macro reads section flag set by user and removes the section ;if it is not selected. ;Then it writes component installed flag to registry ;Input: section index constant name specified in Section command. - + SectionGetFlags ${${SecName}} $AR_SecFlags ;Reading section flags ;Checking lowest bit: IntOp $AR_SecFlags $AR_SecFlags & ${SF_SELECTED} @@ -110,20 +110,20 @@ Var AR_RegFlags WriteRegDWORD HKLM "Software\Microsoft\Windows\CurrentVersion\Uninstall\@CPACK_PACKAGE_INSTALL_REGISTRY_KEY@\Components\${SecName}" \ "Installed" 0 Goto "exit_${SecName}" - + "leave_${SecName}:" ;Section is selected: WriteRegDWORD HKLM "Software\Microsoft\Windows\CurrentVersion\Uninstall\@CPACK_PACKAGE_INSTALL_REGISTRY_KEY@\Components\${SecName}" \ "Installed" 1 - + "exit_${SecName}:" !macroend - + !macro RemoveSection SecName ; This macro is used to call section's Remove_... macro ;from the uninstaller. ;Input: section index constant name specified in Section command. - + !insertmacro "Remove_${${SecName}}" !macroend @@ -132,18 +132,18 @@ Var AR_RegFlags !insertmacro LoadVar ${SecName}_selected SectionGetFlags ${${SecName}} $R1 IntOp $R1 $R1 & ${SF_SELECTED} ;Turn off all other bits - + ; See if the status has changed: IntCmp $R0 $R1 "${SecName}_unchanged" !insertmacro LoadSectionSelectedIntoVar ${SecName} ${SecName}_selected - + IntCmp $R1 ${SF_SELECTED} "${SecName}_was_selected" !insertmacro "Deselect_required_by_${SecName}" goto "${SecName}_unchanged" - + "${SecName}_was_selected:" !insertmacro "Select_${SecName}_depends" - + "${SecName}_unchanged:" !macroend ;--- End of Add/Remove macros --- @@ -153,7 +153,7 @@ Var AR_RegFlags !define MUI_HEADERIMAGE !define MUI_ABORTWARNING - + ;-------------------------------- ; path functions @@ -168,7 +168,7 @@ Var AR_RegFlags !include "WinMessages.NSH" !verbose 4 ;==================================================== -; get_NT_environment +; get_NT_environment ; Returns: the selected environment ; Output : head of the stack ;==================================================== @@ -198,22 +198,22 @@ FunctionEnd !define WriteEnvStr_RegKey 'HKCU "Environment"' !endif !endif - + ; AddToPath - Adds the given dir to the search path. ; Input - head of the stack ; Note - Win9x systems requires reboot - + Function AddToPath Exch $0 Push $1 Push $2 Push $3 - + # don't add if the path doesn't exist IfFileExists "$0\*.*" "" AddToPath_done - + ReadEnvStr $1 PATH - ; if the path is too long for a NSIS variable NSIS will return a 0 + ; if the path is too long for a NSIS variable NSIS will return a 0 ; length string. If we find that, then warn and skip any path ; modification as it will trash the existing path. StrLen $2 $1 @@ -243,7 +243,7 @@ Function AddToPath Call StrStr Pop $2 StrCmp $2 "" "" AddToPath_done - + Call IsNT Pop $1 StrCmp $1 1 AddToPath_NT @@ -258,7 +258,7 @@ Function AddToPath FileClose $1 SetRebootFlag true Goto AddToPath_done - + AddToPath_NT: StrCmp $ADD_TO_PATH_ALL_USERS "1" ReadAllKey ReadRegStr $1 ${NT_current_env} "PATH" @@ -279,7 +279,7 @@ Function AddToPath WriteRegExpandStr ${NT_all_env} "PATH" $0 DoSend: SendMessage ${HWND_BROADCAST} ${WM_WININICHANGE} 0 "STR:Environment" /TIMEOUT=5000 - + AddToPath_done: Pop $3 Pop $2 @@ -287,10 +287,10 @@ Function AddToPath Pop $0 FunctionEnd - + ; RemoveFromPath - Remove a given dir from the path ; Input: head of the stack - + Function un.RemoveFromPath Exch $0 Push $1 @@ -299,9 +299,9 @@ Function un.RemoveFromPath Push $4 Push $5 Push $6 - + IntFmt $6 "%c" 26 # DOS EOF - + Call un.IsNT Pop $1 StrCmp $1 1 unRemoveFromPath_NT @@ -313,7 +313,7 @@ Function un.RemoveFromPath GetFullPathName /SHORT $0 $0 StrCpy $0 "SET PATH=%PATH%;$0" Goto unRemoveFromPath_dosLoop - + unRemoveFromPath_dosLoop: FileRead $1 $3 StrCpy $5 $3 1 -1 # read last char @@ -328,7 +328,7 @@ Function un.RemoveFromPath unRemoveFromPath_dosLoopRemoveLine: SetRebootFlag true Goto unRemoveFromPath_dosLoop - + unRemoveFromPath_dosLoopEnd: FileClose $2 FileClose $1 @@ -337,7 +337,7 @@ Function un.RemoveFromPath CopyFiles /SILENT $4 "$1\autoexec.bat" Delete $4 Goto unRemoveFromPath_done - + unRemoveFromPath_NT: StrCmp $ADD_TO_PATH_ALL_USERS "1" unReadAllKey ReadRegStr $1 ${NT_current_env} "PATH" @@ -361,11 +361,11 @@ Function un.RemoveFromPath StrCpy $5 $1 -$4 # $5 is now the part before the path to remove StrCpy $6 $2 "" $3 # $6 is now the part after the path to remove StrCpy $3 $5$6 - + StrCpy $5 $3 1 -1 # copy last char StrCmp $5 ";" 0 +2 # if last char == ; StrCpy $3 $3 -1 # remove last char - + StrCmp $ADD_TO_PATH_ALL_USERS "1" unWriteAllKey WriteRegExpandStr ${NT_current_env} "PATH" $3 Goto unDoSend @@ -373,7 +373,7 @@ Function un.RemoveFromPath WriteRegExpandStr ${NT_all_env} "PATH" $3 unDoSend: SendMessage ${HWND_BROADCAST} ${WM_WININICHANGE} 0 "STR:Environment" /TIMEOUT=5000 - + unRemoveFromPath_done: Pop $6 Pop $5 @@ -383,7 +383,7 @@ Function un.RemoveFromPath Pop $1 Pop $0 FunctionEnd - + ;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;; ; Uninstall sutff ;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;; @@ -391,7 +391,7 @@ FunctionEnd ########################################### # Utility Functions # ########################################### - + ;==================================================== ; IsNT - Returns 1 if the current system is NT, 0 ; otherwise. @@ -405,7 +405,7 @@ FunctionEnd ; Call IsNT ; Pop $R0 ; ($R0 at this point is 1 or 0) - + !macro IsNT un Function ${un}IsNT Push $0 @@ -415,7 +415,7 @@ Function ${un}IsNT Pop $0 Push 0 Return - + IsNT_yes: ; NT!!! Pop $0 @@ -424,7 +424,7 @@ FunctionEnd !macroend !insertmacro IsNT "" !insertmacro IsNT "un." - + ; StrStr ; input, top of stack = string to search for ; top of stack-1 = string to search in @@ -437,7 +437,7 @@ FunctionEnd ; Call StrStr ; Pop $R0 ; ($R0 at this point is "ass string") - + !macro StrStr un Function ${un}StrStr Exch $R1 ; st=haystack,old$R1, $R1=needle @@ -516,7 +516,7 @@ Function DownloadFile try_again: NSISdl::download "$1/$0" "$INSTDIR\$0" - + Pop $1 StrCmp $1 "success" success StrCmp $1 "Cancelled" cancel @@ -549,10 +549,10 @@ FunctionEnd !insertmacro MUI_PAGE_LICENSE "@CPACK_RESOURCE_FILE_LICENSE@" Page custom InstallOptionsPage !insertmacro MUI_PAGE_DIRECTORY - + ;Start Menu Folder Page Configuration - !define MUI_STARTMENUPAGE_REGISTRY_ROOT "SHCTX" - !define MUI_STARTMENUPAGE_REGISTRY_KEY "Software\@CPACK_PACKAGE_VENDOR@\@CPACK_PACKAGE_INSTALL_REGISTRY_KEY@" + !define MUI_STARTMENUPAGE_REGISTRY_ROOT "SHCTX" + !define MUI_STARTMENUPAGE_REGISTRY_KEY "Software\@CPACK_PACKAGE_VENDOR@\@CPACK_PACKAGE_INSTALL_REGISTRY_KEY@" !define MUI_STARTMENUPAGE_REGISTRY_VALUENAME "Start Menu Folder" !insertmacro MUI_PAGE_STARTMENU Application $STARTMENU_FOLDER @@ -639,10 +639,10 @@ Section "-Core installation" SetOutPath "$INSTDIR" @CPACK_NSIS_EXTRA_PREINSTALL_COMMANDS@ @CPACK_NSIS_FULL_INSTALL@ - + ;Store installation folder WriteRegStr SHCTX "Software\@CPACK_PACKAGE_VENDOR@\@CPACK_PACKAGE_INSTALL_REGISTRY_KEY@" "" $INSTDIR - + ;Create uninstaller WriteUninstaller "$INSTDIR\Uninstall.exe" Push "DisplayName" @@ -660,7 +660,7 @@ Section "-Core installation" Push "NoRepair" Push "1" Call ConditionalAddToRegisty - + !ifdef CPACK_NSIS_ADD_REMOVE ;Create add/remove functionality Push "ModifyPath" @@ -671,7 +671,7 @@ Section "-Core installation" Push "1" Call ConditionalAddToRegisty !endif - + ; Optional registration Push "DisplayIcon" Push "$INSTDIR\@CPACK_NSIS_INSTALLED_ICON_NAME@" @@ -687,7 +687,7 @@ Section "-Core installation" Call ConditionalAddToRegisty !insertmacro MUI_INSTALLOPTIONS_READ $INSTALL_DESKTOP "NSIS.InstallOptions.ini" "Field 5" "State" !insertmacro MUI_STARTMENU_WRITE_BEGIN Application - + ;Create shortcuts CreateDirectory "$SMPROGRAMS\$STARTMENU_FOLDER" @CPACK_NSIS_CREATE_ICONS@ @@ -725,7 +725,7 @@ SectionEnd Section "-Add to path" Push $INSTDIR\bin StrCmp "@CPACK_NSIS_MODIFY_PATH@" "ON" 0 doNotAddToPath - StrCmp $DO_NOT_ADD_TO_PATH "1" doNotAddToPath 0 + StrCmp $DO_NOT_ADD_TO_PATH "1" doNotAddToPath 0 Call AddToPath doNotAddToPath: SectionEnd @@ -756,12 +756,12 @@ Function un.onInit SetShellVarContext all ;MessageBox MB_OK 'User "$0" is in the Power Users group' Goto done - + noLM: ;Get installation folder from registry if available done: - + FunctionEnd ;--- Add/Remove callback functions: --- @@ -770,25 +770,25 @@ FunctionEnd ;List all of your components in following manner here. @CPACK_NSIS_COMPONENT_SECTION_LIST@ !macroend - + Section -FinishComponents ;Removes unselected components and writes component status to registry !insertmacro SectionList "FinishSection" - -!ifdef CPACK_NSIS_ADD_REMOVE + +!ifdef CPACK_NSIS_ADD_REMOVE ; Get the name of the installer executable System::Call 'kernel32::GetModuleFileNameA(i 0, t .R0, i 1024) i r1' StrCpy $R3 $R0 - + ; Strip off the last 13 characters, to see if we have AddRemove.exe StrLen $R1 $R0 IntOp $R1 $R0 - 13 StrCpy $R2 $R0 13 $R1 StrCmp $R2 "AddRemove.exe" addremove_installed - + ; We're not running AddRemove.exe, so install it CopyFiles $R3 $INSTDIR\AddRemove.exe - + addremove_installed: !endif SectionEnd @@ -825,7 +825,7 @@ Section "Uninstall" @CPACK_NSIS_DELETE_FILES@ @CPACK_NSIS_DELETE_DIRECTORIES@ -!ifdef CPACK_NSIS_ADD_REMOVE +!ifdef CPACK_NSIS_ADD_REMOVE ;Remove the add/remove program Delete "$INSTDIR\AddRemove.exe" !endif @@ -842,23 +842,23 @@ Section "Uninstall" ; Removes all optional components !insertmacro SectionList "RemoveSection" - + !insertmacro MUI_STARTMENU_GETFOLDER Application $MUI_TEMP - + Delete "$SMPROGRAMS\$MUI_TEMP\Uninstall.lnk" @CPACK_NSIS_DELETE_ICONS@ @CPACK_NSIS_DELETE_ICONS_EXTRA@ - + ;Delete empty start menu parent diretories StrCpy $MUI_TEMP "$SMPROGRAMS\$MUI_TEMP" - + startMenuDeleteLoop: ClearErrors RMDir $MUI_TEMP GetFullPathName $MUI_TEMP "$MUI_TEMP\.." - + IfErrors startMenuDeleteLoopDone - + StrCmp "$MUI_TEMP" "$SMPROGRAMS" startMenuDeleteLoopDone startMenuDeleteLoop startMenuDeleteLoopDone: @@ -867,17 +867,17 @@ Section "Uninstall" StrCpy $MUI_TEMP "$START_MENU" Delete "$SMPROGRAMS\$MUI_TEMP\Uninstall.lnk" @CPACK_NSIS_DELETE_ICONS_EXTRA@ - + ;Delete empty start menu parent diretories StrCpy $MUI_TEMP "$SMPROGRAMS\$MUI_TEMP" - + secondStartMenuDeleteLoop: ClearErrors RMDir $MUI_TEMP GetFullPathName $MUI_TEMP "$MUI_TEMP\.." - + IfErrors secondStartMenuDeleteLoopDone - + StrCmp "$MUI_TEMP" "$SMPROGRAMS" secondStartMenuDeleteLoopDone secondStartMenuDeleteLoop secondStartMenuDeleteLoopDone: @@ -925,14 +925,14 @@ inst: ; Reads components status for registry !insertmacro SectionList "InitSection" - ; check to see if /D has been used to change - ; the install directory by comparing it to the + ; check to see if /D has been used to change + ; the install directory by comparing it to the ; install directory that is expected to be the ; default StrCpy $IS_DEFAULT_INSTALLDIR 0 StrCmp "$INSTDIR" "@CPACK_NSIS_INSTALL_ROOT@\@CPACK_PACKAGE_INSTALL_DIRECTORY@" 0 +2 StrCpy $IS_DEFAULT_INSTALLDIR 1 - + StrCpy $SV_ALLUSERS "JustMe" ; if default install dir then change the default ; if it is installed for JustMe @@ -955,7 +955,7 @@ inst: ;MessageBox MB_OK 'User "$0" is in the Power Users group' StrCpy $SV_ALLUSERS "AllUsers" Goto done - + noLM: StrCpy $SV_ALLUSERS "AllUsers" ;Get installation folder from registry if available diff --git a/Modules/Platform/BlueGeneL.cmake b/Modules/Platform/BlueGeneL.cmake index 7794a26..4021147 100644 --- a/Modules/Platform/BlueGeneL.cmake +++ b/Modules/Platform/BlueGeneL.cmake @@ -1,7 +1,7 @@ -#the compute nodes on BlueGene/L don't support shared libs +#the compute nodes on BlueGene/L don't support shared libs SET_PROPERTY(GLOBAL PROPERTY TARGET_SUPPORTS_SHARED_LIBS FALSE) -SET(CMAKE_SHARED_LIBRARY_C_FLAGS "") # -pic +SET(CMAKE_SHARED_LIBRARY_C_FLAGS "") # -pic SET(CMAKE_SHARED_LIBRARY_CREATE_C_FLAGS "") # -shared SET(CMAKE_SHARED_LIBRARY_LINK_C_FLAGS "") # +s, flag for exe link to use shared lib SET(CMAKE_SHARED_LIBRARY_RUNTIME_C_FLAG "") # -rpath diff --git a/Modules/Platform/Catamount.cmake b/Modules/Platform/Catamount.cmake index 01493fc..cf672c9 100644 --- a/Modules/Platform/Catamount.cmake +++ b/Modules/Platform/Catamount.cmake @@ -1,7 +1,7 @@ -#Catamount, which runs on the compute nodes of Cray machines, e.g. RedStorm, doesn't support shared libs +#Catamount, which runs on the compute nodes of Cray machines, e.g. RedStorm, doesn't support shared libs SET_PROPERTY(GLOBAL PROPERTY TARGET_SUPPORTS_SHARED_LIBS FALSE) -SET(CMAKE_SHARED_LIBRARY_C_FLAGS "") # -pic +SET(CMAKE_SHARED_LIBRARY_C_FLAGS "") # -pic SET(CMAKE_SHARED_LIBRARY_CREATE_C_FLAGS "") # -shared SET(CMAKE_SHARED_LIBRARY_LINK_C_FLAGS "") # +s, flag for exe link to use shared lib SET(CMAKE_SHARED_LIBRARY_RUNTIME_C_FLAG "") # -rpath diff --git a/Modules/Platform/Darwin-icc.cmake b/Modules/Platform/Darwin-icc.cmake index b592e5f..621905c 100644 --- a/Modules/Platform/Darwin-icc.cmake +++ b/Modules/Platform/Darwin-icc.cmake @@ -100,7 +100,7 @@ SET(CMAKE_Fortran_CREATE_SHARED_MODULE "<CMAKE_Fortran_COMPILER> <LANGUAGE_COMPILE_FLAGS> <CMAKE_SHARED_MODULE_CREATE_Fortran_FLAGS> <LINK_FLAGS> -o <TARGET> <OBJECTS> <LINK_LIBRARIES>") -# We can use $ENV{INTEL_LICENSE_FILE} to try and get at the installation location for ICC. +# We can use $ENV{INTEL_LICENSE_FILE} to try and get at the installation location for ICC. # We also need to consider to use cce (which is the 64bit compiler) and not JUST the 32bit compiler. # I have no idea what the best way to do that would be. diff --git a/Modules/Platform/Generic-ADSP-C.cmake b/Modules/Platform/Generic-ADSP-C.cmake index f064468..d35307b 100644 --- a/Modules/Platform/Generic-ADSP-C.cmake +++ b/Modules/Platform/Generic-ADSP-C.cmake @@ -9,7 +9,7 @@ SET(CMAKE_C_FLAGS_MINSIZEREL_INIT "") SET(CMAKE_C_FLAGS_RELEASE_INIT "") SET(CMAKE_C_FLAGS_RELWITHDEBINFO_INIT "") -SET(CMAKE_C_CREATE_STATIC_LIBRARY +SET(CMAKE_C_CREATE_STATIC_LIBRARY "<CMAKE_C_COMPILER> -build-lib -proc ${ADSP_PROCESSOR} -si-revision ${ADSP_PROCESSOR_SILICIUM_REVISION} -o <TARGET> <CMAKE_C_LINK_FLAGS> <OBJECTS>") SET(CMAKE_C_LINK_EXECUTABLE diff --git a/Modules/Platform/Generic-ADSP-CXX.cmake b/Modules/Platform/Generic-ADSP-CXX.cmake index 21daa81..42d3d56 100644 --- a/Modules/Platform/Generic-ADSP-CXX.cmake +++ b/Modules/Platform/Generic-ADSP-CXX.cmake @@ -7,7 +7,7 @@ SET(CMAKE_CXX_FLAGS_MINSIZEREL_INIT "") SET(CMAKE_CXX_FLAGS_RELEASE_INIT "") SET(CMAKE_CXX_FLAGS_RELWITHDEBINFO_INIT "") -SET(CMAKE_CXX_CREATE_STATIC_LIBRARY +SET(CMAKE_CXX_CREATE_STATIC_LIBRARY "<CMAKE_CXX_COMPILER> -build-lib -proc ${ADSP_PROCESSOR} -si-revision ${ADSP_PROCESSOR_SILICIUM_REVISION} -o <TARGET> <CMAKE_CXX_LINK_FLAGS> <OBJECTS>") SET(CMAKE_CXX_LINK_EXECUTABLE diff --git a/Modules/Platform/Generic-ADSP-Common.cmake b/Modules/Platform/Generic-ADSP-Common.cmake index 10fb34e..14b92e9 100644 --- a/Modules/Platform/Generic-ADSP-Common.cmake +++ b/Modules/Platform/Generic-ADSP-Common.cmake @@ -14,7 +14,7 @@ IF(NOT ADSP) SET(CMAKE_SHARED_LIBRARY_SUFFIX "") SET(CMAKE_EXECUTABLE_SUFFIX ".dxe") - # if ADSP_PROCESSOR has not been set, but CMAKE_SYSTEM_PROCESSOR has, + # if ADSP_PROCESSOR has not been set, but CMAKE_SYSTEM_PROCESSOR has, # assume that this is the processor name to use for the compiler IF(CMAKE_SYSTEM_PROCESSOR AND NOT ADSP_PROCESSOR) SET(ADSP_PROCESSOR ${CMAKE_SYSTEM_PROCESSOR}) diff --git a/Modules/Platform/Generic-SDCC-C.cmake b/Modules/Platform/Generic-SDCC-C.cmake index ac81c35..6c36445 100644 --- a/Modules/Platform/Generic-SDCC-C.cmake +++ b/Modules/Platform/Generic-SDCC-C.cmake @@ -20,8 +20,8 @@ SET(CMAKE_DL_LIBS "") SET(CMAKE_C_OUTPUT_EXTENSION ".rel") # find sdcclib as CMAKE_AR -# since cmake may already have searched for "ar", sdcclib has to -# be searched with a different variable name (SDCCLIB_EXECUTABLE) +# since cmake may already have searched for "ar", sdcclib has to +# be searched with a different variable name (SDCCLIB_EXECUTABLE) # and must then be forced into the cache GET_FILENAME_COMPONENT(SDCC_LOCATION "${CMAKE_C_COMPILER}" PATH) FIND_PROGRAM(SDCCLIB_EXECUTABLE sdcclib PATHS "${SDCC_LOCATION}" NO_DEFAULT_PATH) diff --git a/Modules/Platform/Generic.cmake b/Modules/Platform/Generic.cmake index a4e2ec6..e6f8b2b 100644 --- a/Modules/Platform/Generic.cmake +++ b/Modules/Platform/Generic.cmake @@ -2,7 +2,7 @@ # operating system, typically embedded platforms. # It is used when CMAKE_SYSTEM_NAME is set to "Generic" # -# It is intentionally empty, since nothing is known +# It is intentionally empty, since nothing is known # about the platform. So everything has to be specified # in the system/compiler files ${CMAKE_SYSTEM_NAME}-<compiler_basename>.cmake # and/or ${CMAKE_SYSTEM_NAME}-<compiler_basename>-${CMAKE_SYSTEM_PROCESSOR}.cmake diff --git a/Modules/Platform/IRIX64.cmake b/Modules/Platform/IRIX64.cmake index b60a7f2..09fa998 100644 --- a/Modules/Platform/IRIX64.cmake +++ b/Modules/Platform/IRIX64.cmake @@ -11,7 +11,7 @@ IF(NOT CMAKE_COMPILER_IS_GNUCC) SET(CMAKE_EXE_LINKER_FLAGS_INIT "") SET(CMAKE_SHARED_LINKER_FLAGS_INIT "") SET(CMAKE_MODULE_LINKER_FLAGS_INIT "") - + # If no -o32, -n32, or -64 flag is given, set a reasonable default. IF("$ENV{CFLAGS} $ENV{CXXFLAGS} $ENV{LDFLAGS}" MATCHES "-([no]32|64)") ELSE("$ENV{CFLAGS} $ENV{CXXFLAGS} $ENV{LDFLAGS}" MATCHES "-([no]32|64)") @@ -21,7 +21,7 @@ IF(NOT CMAKE_COMPILER_IS_GNUCC) SET(CMAKE_FILE_SELF "${CMAKE_FILE_SELF}" CACHE INTERNAL "Output of file command on ${CMAKE_COMMAND}.") ENDIF(CMAKE_FILE_SELF MATCHES "^CMAKE_FILE_SELF$") - + # Set initial flags to match cmake executable. IF(CMAKE_FILE_SELF MATCHES " 64-bit ") SET(CMAKE_C_FLAGS_INIT "-64") @@ -32,7 +32,7 @@ IF(NOT CMAKE_COMPILER_IS_GNUCC) SET(CMAKE_MODULE_LINKER_FLAGS_INIT "-64") ENDIF(CMAKE_FILE_SELF MATCHES " 64-bit ") ENDIF("$ENV{CFLAGS} $ENV{CXXFLAGS} $ENV{LDFLAGS}" MATCHES "-([no]32|64)") - + # Set remaining defaults. SET(CMAKE_CXX_CREATE_STATIC_LIBRARY "<CMAKE_CXX_COMPILER> -ar -o <TARGET> <OBJECTS>") diff --git a/Modules/Platform/OSF1.cmake b/Modules/Platform/OSF1.cmake index 49a30e9..3017a07 100644 --- a/Modules/Platform/OSF1.cmake +++ b/Modules/Platform/OSF1.cmake @@ -2,7 +2,7 @@ SET(CMAKE_DL_LIBS "") IF(CMAKE_SYSTEM MATCHES "OSF1-1.[012]") ENDIF(CMAKE_SYSTEM MATCHES "OSF1-1.[012]") -IF(CMAKE_SYSTEM MATCHES "OSF1-1.*") +IF(CMAKE_SYSTEM MATCHES "OSF1-1.*") # OSF/1 1.3 from OSF using ELF, and derivatives, including AD2 SET(CMAKE_C_COMPILE_OPTIONS_PIC "-fpic") SET(CMAKE_C_COMPILE_OPTIONS_PIE "-fpie") @@ -15,12 +15,12 @@ ENDIF(CMAKE_SYSTEM MATCHES "OSF1-1.*") IF(CMAKE_SYSTEM MATCHES "OSF1-V.*") SET(CMAKE_SHARED_LIBRARY_CREATE_C_FLAGS "-shared -Wl,-expect_unresolved,\\*") # -shared IF(CMAKE_COMPILER_IS_GNUCXX) - SET(CMAKE_SHARED_LIBRARY_RUNTIME_CXX_FLAG "-Wl,-rpath,") + SET(CMAKE_SHARED_LIBRARY_RUNTIME_CXX_FLAG "-Wl,-rpath,") ELSE(CMAKE_COMPILER_IS_GNUCXX) SET(CMAKE_SHARED_LIBRARY_RUNTIME_CXX_FLAG "-rpath ") ENDIF(CMAKE_COMPILER_IS_GNUCXX) IF(CMAKE_COMPILER_IS_GNUCC) - SET(CMAKE_SHARED_LIBRARY_RUNTIME_C_FLAG "-Wl,-rpath,") + SET(CMAKE_SHARED_LIBRARY_RUNTIME_C_FLAG "-Wl,-rpath,") ELSE(CMAKE_COMPILER_IS_GNUCC) SET(CMAKE_SHARED_LIBRARY_RUNTIME_C_FLAG "-rpath ") ENDIF(CMAKE_COMPILER_IS_GNUCC) @@ -30,7 +30,7 @@ ENDIF(CMAKE_SYSTEM MATCHES "OSF1-V.*") SET(CMAKE_MAKE_INCLUDE_FROM_ROOT 1) # include $(CMAKE_BINARY_DIR)/... IF(CMAKE_COMPILER_IS_GNUCXX) - # include the gcc flags + # include the gcc flags ELSE (CMAKE_COMPILER_IS_GNUCXX) # use default OSF compiler flags SET (CMAKE_C_FLAGS_INIT "") diff --git a/Modules/Platform/SunOS.cmake b/Modules/Platform/SunOS.cmake index de287aa..39cb48c 100644 --- a/Modules/Platform/SunOS.cmake +++ b/Modules/Platform/SunOS.cmake @@ -4,7 +4,7 @@ IF(CMAKE_SYSTEM MATCHES "SunOS-4.*") SET(CMAKE_SHARED_LIBRARY_C_FLAGS "-PIC") SET(CMAKE_SHARED_LIBRARY_CREATE_C_FLAGS "-shared -Wl,-r") SET(CMAKE_SHARED_LIBRARY_RUNTIME_C_FLAG "-Wl,-R") - SET(CMAKE_SHARED_LIBRARY_RUNTIME_C_FLAG_SEP ":") + SET(CMAKE_SHARED_LIBRARY_RUNTIME_C_FLAG_SEP ":") ENDIF(CMAKE_SYSTEM MATCHES "SunOS-4.*") IF(CMAKE_COMPILER_IS_GNUCXX) diff --git a/Modules/Platform/ULTRIX.cmake b/Modules/Platform/ULTRIX.cmake index 4d0cf75..154d7e6 100644 --- a/Modules/Platform/ULTRIX.cmake +++ b/Modules/Platform/ULTRIX.cmake @@ -1,5 +1,5 @@ SET(CMAKE_SHARED_LIBRARY_C_FLAGS "-G 0") -SET(CMAKE_SHARED_LIBRARY_SUFFIX "..o") +SET(CMAKE_SHARED_LIBRARY_SUFFIX "..o") SET(CMAKE_DL_LIBS "") SET(CMAKE_SHARED_LIBRARY_LINK_C_FLAGS "-Wl,-D,08000000") INCLUDE(Platform/UnixPaths) diff --git a/Modules/Platform/UnixPaths.cmake b/Modules/Platform/UnixPaths.cmake index 5ee7ddb..6aef111 100644 --- a/Modules/Platform/UnixPaths.cmake +++ b/Modules/Platform/UnixPaths.cmake @@ -52,7 +52,7 @@ LIST(APPEND CMAKE_SYSTEM_INCLUDE_PATH # Other /usr/pkg/include - /opt/csw/include /opt/include + /opt/csw/include /opt/include /usr/openwin/include ) @@ -65,7 +65,7 @@ LIST(APPEND CMAKE_SYSTEM_LIBRARY_PATH # Other /usr/pkg/lib - /opt/csw/lib /opt/lib + /opt/csw/lib /opt/lib /usr/openwin/lib ) diff --git a/Modules/Platform/Windows-Intel.cmake b/Modules/Platform/Windows-Intel.cmake index 2a54a98..16b3c81 100644 --- a/Modules/Platform/Windows-Intel.cmake +++ b/Modules/Platform/Windows-Intel.cmake @@ -64,14 +64,14 @@ SET (CMAKE_MODULE_LINKER_FLAGS_RELWITHDEBINFO_INIT ${CMAKE_EXE_LINKER_FLAGS_RELW INCLUDE("${CMAKE_PLATFORM_ROOT_BIN}/CMakeIntelInformation.cmake" OPTIONAL) IF(NOT _INTEL_XILINK_TEST_RUN) - EXECUTE_PROCESS(COMMAND xilink /? + EXECUTE_PROCESS(COMMAND xilink /? ERROR_VARIABLE _XILINK_ERR OUTPUT_VARIABLE _XILINK_HELP) IF(_XILINK_HELP MATCHES MANIFEST) SET(_INTEL_COMPILER_SUPPORTS_MANIFEST 1) ENDIF(_XILINK_HELP MATCHES MANIFEST) IF(NOT EXISTS "${CMAKE_PLATFORM_ROOT_BIN}/CMakeIntelInformation.cmake") - FILE(WRITE ${CMAKE_PLATFORM_ROOT_BIN}/CMakeIntelInformation.cmake + FILE(WRITE ${CMAKE_PLATFORM_ROOT_BIN}/CMakeIntelInformation.cmake " SET(_INTEL_XILINK_TEST_RUN 1) SET(_INTEL_COMPILER_SUPPORTS_MANIFEST ${_INTEL_COMPILER_SUPPORTS_MANIFEST}) diff --git a/Modules/Platform/Windows-cl.cmake b/Modules/Platform/Windows-cl.cmake index be6abb6..34b1125 100644 --- a/Modules/Platform/Windows-cl.cmake +++ b/Modules/Platform/Windows-cl.cmake @@ -15,7 +15,7 @@ IF(CMAKE_GENERATOR MATCHES "Visual Studio 6") ENDIF(CMAKE_GENERATOR MATCHES "Visual Studio 6") IF(NOT CMAKE_NO_BUILD_TYPE AND CMAKE_GENERATOR MATCHES "Visual Studio") SET (CMAKE_NO_BUILD_TYPE 1) - SET (CMAKE_CONFIGURATION_TYPES "Debug;Release;MinSizeRel;RelWithDebInfo" CACHE STRING + SET (CMAKE_CONFIGURATION_TYPES "Debug;Release;MinSizeRel;RelWithDebInfo" CACHE STRING "Semicolon separated list of supported configuration types, only supports Debug, Release, MinSizeRel, and RelWithDebInfo, anything else will be ignored.") MARK_AS_ADVANCED(CMAKE_CONFIGURATION_TYPES) ENDIF(NOT CMAKE_NO_BUILD_TYPE AND CMAKE_GENERATOR MATCHES "Visual Studio") @@ -49,13 +49,13 @@ IF(CMAKE_GENERATOR MATCHES "Makefiles" OR CMAKE_GENERATOR MATCHES "Ninja") IF (NOT CMAKE_C_COMPILER) SET(CMAKE_TEST_COMPILER ${CMAKE_CXX_COMPILER}) ENDIF(NOT CMAKE_C_COMPILER) - EXEC_PROGRAM(${CMAKE_TEST_COMPILER} - ARGS /nologo -EP \"${testNmakeCLVersionFile}\" - OUTPUT_VARIABLE CMAKE_COMPILER_OUTPUT + EXEC_PROGRAM(${CMAKE_TEST_COMPILER} + ARGS /nologo -EP \"${testNmakeCLVersionFile}\" + OUTPUT_VARIABLE CMAKE_COMPILER_OUTPUT RETURN_VALUE CMAKE_COMPILER_RETURN ) IF(NOT CMAKE_COMPILER_RETURN) - FILE(APPEND ${CMAKE_BINARY_DIR}${CMAKE_FILES_DIRECTORY}/CMakeOutput.log + FILE(APPEND ${CMAKE_BINARY_DIR}${CMAKE_FILES_DIRECTORY}/CMakeOutput.log "Determining the version of compiler passed with the following output:\n" "${CMAKE_COMPILER_OUTPUT}\n\n") STRING(REGEX REPLACE "\n" " " compilerVersion "${CMAKE_COMPILER_OUTPUT}") @@ -92,7 +92,7 @@ IF(CMAKE_GENERATOR MATCHES "Makefiles" OR CMAKE_GENERATOR MATCHES "Ninja") SET(MSVC_VERSION "${compilerVersion}") ELSE(NOT CMAKE_COMPILER_RETURN) MESSAGE(STATUS "Check for CL compiler version - failed") - FILE(APPEND ${CMAKE_BINARY_DIR}${CMAKE_FILES_DIRECTORY}/CMakeError.log + FILE(APPEND ${CMAKE_BINARY_DIR}${CMAKE_FILES_DIRECTORY}/CMakeError.log "Determining the version of compiler failed with the following output:\n" "${CMAKE_COMPILER_OUTPUT}\n\n") ENDIF(NOT CMAKE_COMPILER_RETURN) @@ -107,17 +107,17 @@ IF(CMAKE_GENERATOR MATCHES "Makefiles" OR CMAKE_GENERATOR MATCHES "Ninja") EXEC_PROGRAM(${CMAKE_TEST_COMPILER} ${CMAKE_BINARY_DIR}${CMAKE_FILES_DIRECTORY}/CMakeTmp2 ARGS /nologo /MD /EHsc \"${testForFreeVCFile}\" - OUTPUT_VARIABLE CMAKE_COMPILER_OUTPUT + OUTPUT_VARIABLE CMAKE_COMPILER_OUTPUT RETURN_VALUE CMAKE_COMPILER_RETURN ) IF(CMAKE_COMPILER_RETURN) - FILE(APPEND ${CMAKE_BINARY_DIR}${CMAKE_FILES_DIRECTORY}/CMakeError.log + FILE(APPEND ${CMAKE_BINARY_DIR}${CMAKE_FILES_DIRECTORY}/CMakeError.log "Determining if this is a free VC compiler failed with the following output:\n" "${CMAKE_COMPILER_OUTPUT}\n\n") MESSAGE(STATUS "Check if this is a free VC compiler - yes") SET(CMAKE_USING_VC_FREE_TOOLS 1) ELSE(CMAKE_COMPILER_RETURN) - FILE(APPEND ${CMAKE_BINARY_DIR}${CMAKE_FILES_DIRECTORY}/CMakeOutput.log + FILE(APPEND ${CMAKE_BINARY_DIR}${CMAKE_FILES_DIRECTORY}/CMakeOutput.log "Determining if this is a free VC compiler passed with the following output:\n" "${CMAKE_COMPILER_OUTPUT}\n\n") MESSAGE(STATUS "Check if this is a free VC compiler - no") @@ -243,11 +243,11 @@ SET (CMAKE_MODULE_LINKER_FLAGS_MINSIZEREL_INIT ${CMAKE_EXE_LINKER_FLAGS_MINSIZER # save computed information for this platform IF(NOT EXISTS "${CMAKE_PLATFORM_ROOT_BIN}/CMakeCPlatform.cmake") - CONFIGURE_FILE(${CMAKE_ROOT}/Modules/Platform/Windows-cl.cmake.in + CONFIGURE_FILE(${CMAKE_ROOT}/Modules/Platform/Windows-cl.cmake.in ${CMAKE_BINARY_DIR}${CMAKE_FILES_DIRECTORY}/CMakeCPlatform.cmake IMMEDIATE) ENDIF(NOT EXISTS "${CMAKE_PLATFORM_ROOT_BIN}/CMakeCPlatform.cmake") IF(NOT EXISTS "${CMAKE_PLATFORM_ROOT_BIN}/CMakeCXXPlatform.cmake") - CONFIGURE_FILE(${CMAKE_ROOT}/Modules/Platform/Windows-cl.cmake.in + CONFIGURE_FILE(${CMAKE_ROOT}/Modules/Platform/Windows-cl.cmake.in ${CMAKE_BINARY_DIR}${CMAKE_FILES_DIRECTORY}/CMakeCXXPlatform.cmake IMMEDIATE) ENDIF(NOT EXISTS "${CMAKE_PLATFORM_ROOT_BIN}/CMakeCXXPlatform.cmake") diff --git a/Modules/Platform/gas.cmake b/Modules/Platform/gas.cmake index c34aef1..b9d2a65 100644 --- a/Modules/Platform/gas.cmake +++ b/Modules/Platform/gas.cmake @@ -6,7 +6,7 @@ ENDIF(UNIX) SET(CMAKE_ASM${ASM_DIALECT}_COMPILE_OBJECT "<CMAKE_ASM${ASM_DIALECT}_COMPILER> <FLAGS> -o <OBJECT> <SOURCE>") -SET(CMAKE_ASM${ASM_DIALECT}_CREATE_STATIC_LIBRARY +SET(CMAKE_ASM${ASM_DIALECT}_CREATE_STATIC_LIBRARY "<CMAKE_AR> cr <TARGET> <LINK_FLAGS> <OBJECTS> " "<CMAKE_RANLIB> <TARGET> ") diff --git a/Modules/Qt4ConfigDependentSettings.cmake b/Modules/Qt4ConfigDependentSettings.cmake index 10af3bc..665d274 100644 --- a/Modules/Qt4ConfigDependentSettings.cmake +++ b/Modules/Qt4ConfigDependentSettings.cmake @@ -16,7 +16,7 @@ ############################################### # -# configuration/system dependent settings +# configuration/system dependent settings # ############################################### diff --git a/Modules/Qt4Macros.cmake b/Modules/Qt4Macros.cmake index 68f3c80..27a8ee8 100644 --- a/Modules/Qt4Macros.cmake +++ b/Modules/Qt4Macros.cmake @@ -29,13 +29,13 @@ MACRO (QT4_EXTRACT_OPTIONS _qt4_files _qt4_options) IF ("${_currentArg}" STREQUAL "OPTIONS") SET(_QT4_DOING_OPTIONS TRUE) ELSE ("${_currentArg}" STREQUAL "OPTIONS") - IF(_QT4_DOING_OPTIONS) + IF(_QT4_DOING_OPTIONS) LIST(APPEND ${_qt4_options} "${_currentArg}") ELSE(_QT4_DOING_OPTIONS) LIST(APPEND ${_qt4_files} "${_currentArg}") ENDIF(_QT4_DOING_OPTIONS) ENDIF ("${_currentArg}" STREQUAL "OPTIONS") - ENDFOREACH(_currentArg) + ENDFOREACH(_currentArg) ENDMACRO (QT4_EXTRACT_OPTIONS) @@ -54,9 +54,9 @@ MACRO (QT4_MAKE_OUTPUT_FILE infile prefix ext outfile ) ELSE(_infileLength GREATER _binlength) FILE(RELATIVE_PATH rel ${CMAKE_CURRENT_SOURCE_DIR} ${infile}) ENDIF(_infileLength GREATER _binlength) - IF(WIN32 AND rel MATCHES "^[a-zA-Z]:") # absolute path + IF(WIN32 AND rel MATCHES "^[a-zA-Z]:") # absolute path STRING(REGEX REPLACE "^([a-zA-Z]):(.*)$" "\\1_\\2" rel "${rel}") - ENDIF(WIN32 AND rel MATCHES "^[a-zA-Z]:") + ENDIF(WIN32 AND rel MATCHES "^[a-zA-Z]:") SET(_outfile "${CMAKE_CURRENT_BINARY_DIR}/${rel}") STRING(REPLACE ".." "__" _outfile ${_outfile}) GET_FILENAME_COMPONENT(outpath ${_outfile} PATH) diff --git a/Modules/SelectLibraryConfigurations.cmake b/Modules/SelectLibraryConfigurations.cmake index dbff487..e4df3eb 100644 --- a/Modules/SelectLibraryConfigurations.cmake +++ b/Modules/SelectLibraryConfigurations.cmake @@ -6,7 +6,7 @@ # basename_LIBRARY_RELEASE is defined, basename_LIBRARY, basename_LIBRARY_DEBUG, # and basename_LIBRARY_RELEASE will be set to the release value. If only # basename_LIBRARY_DEBUG is defined, then basename_LIBRARY, -# basename_LIBRARY_DEBUG and basename_LIBRARY_RELEASE will take the debug value. +# basename_LIBRARY_DEBUG and basename_LIBRARY_RELEASE will take the debug value. # # If the generator supports configuration types, then basename_LIBRARY and # basename_LIBRARIES will be set with debug and optimized flags specifying the @@ -69,14 +69,14 @@ macro( select_library_configurations basename ) endif( CMAKE_CONFIGURATION_TYPES OR CMAKE_BUILD_TYPE ) endif() - set( ${basename}_LIBRARY ${${basename}_LIBRARY} CACHE FILEPATH + set( ${basename}_LIBRARY ${${basename}_LIBRARY} CACHE FILEPATH "The ${basename} library" ) if( ${basename}_LIBRARY ) set( ${basename}_FOUND TRUE ) endif( ${basename}_LIBRARY ) - mark_as_advanced( ${basename}_LIBRARY + mark_as_advanced( ${basename}_LIBRARY ${basename}_LIBRARY_RELEASE ${basename}_LIBRARY_DEBUG ) diff --git a/Modules/SystemInformation.cmake b/Modules/SystemInformation.cmake index d4f2233..443c7aa 100644 --- a/Modules/SystemInformation.cmake +++ b/Modules/SystemInformation.cmake @@ -23,33 +23,33 @@ SET_DIRECTORY_PROPERTIES(PROPERTIES INCLUDE_DIRECTORIES "${DumpInformation_BINAR CONFIGURE_FILE("${CMAKE_ROOT}/Modules/SystemInformation.in" "${RESULT_FILE}") -FILE(APPEND "${RESULT_FILE}" +FILE(APPEND "${RESULT_FILE}" "\n=================================================================\n") -FILE(APPEND "${RESULT_FILE}" +FILE(APPEND "${RESULT_FILE}" "=== VARIABLES\n") -FILE(APPEND "${RESULT_FILE}" +FILE(APPEND "${RESULT_FILE}" "=================================================================\n") GET_CMAKE_PROPERTY(res VARIABLES) FOREACH(var ${res}) FILE(APPEND "${RESULT_FILE}" "${var} \"${${var}}\"\n") ENDFOREACH(var ${res}) -FILE(APPEND "${RESULT_FILE}" +FILE(APPEND "${RESULT_FILE}" "\n=================================================================\n") -FILE(APPEND "${RESULT_FILE}" +FILE(APPEND "${RESULT_FILE}" "=== COMMANDS\n") -FILE(APPEND "${RESULT_FILE}" +FILE(APPEND "${RESULT_FILE}" "=================================================================\n") GET_CMAKE_PROPERTY(res COMMANDS) FOREACH(var ${res}) FILE(APPEND "${RESULT_FILE}" "${var}\n") ENDFOREACH(var ${res}) -FILE(APPEND "${RESULT_FILE}" +FILE(APPEND "${RESULT_FILE}" "\n=================================================================\n") -FILE(APPEND "${RESULT_FILE}" +FILE(APPEND "${RESULT_FILE}" "=== MACROS\n") -FILE(APPEND "${RESULT_FILE}" +FILE(APPEND "${RESULT_FILE}" "=================================================================\n") FILE(WRITE ${CMAKE_CURRENT_BINARY_DIR}/AllMacros.txt "") GET_CMAKE_PROPERTY(res MACROS) @@ -57,11 +57,11 @@ FOREACH(var ${res}) FILE(APPEND "${RESULT_FILE}" "${var}\n") ENDFOREACH(var ${res}) -FILE(APPEND "${RESULT_FILE}" +FILE(APPEND "${RESULT_FILE}" "\n=================================================================\n") -FILE(APPEND "${RESULT_FILE}" +FILE(APPEND "${RESULT_FILE}" "=== OTHER\n") -FILE(APPEND "${RESULT_FILE}" +FILE(APPEND "${RESULT_FILE}" "=================================================================\n") GET_DIRECTORY_PROPERTY(res INCLUDE_DIRECTORIES) FOREACH(var ${res}) @@ -80,13 +80,13 @@ FILE(APPEND "${RESULT_FILE}" "INCLUDE_REGULAR_EXPRESSION: ${res}\n") # binary tree MACRO(DUMP_FILE THE_FILE) IF (EXISTS "${THE_FILE}") - FILE(APPEND "${RESULT_FILE}" + FILE(APPEND "${RESULT_FILE}" "\n=================================================================\n") - FILE(APPEND "${RESULT_FILE}" + FILE(APPEND "${RESULT_FILE}" "=== ${THE_FILE}\n") - FILE(APPEND "${RESULT_FILE}" + FILE(APPEND "${RESULT_FILE}" "=================================================================\n") - + FILE(READ "${THE_FILE}" FILE_CONTENTS LIMIT 50000) FILE(APPEND "${RESULT_FILE}" "${FILE_CONTENTS}") ENDIF (EXISTS "${THE_FILE}") diff --git a/Modules/TestBigEndian.cmake b/Modules/TestBigEndian.cmake index 9960602..bca7979 100644 --- a/Modules/TestBigEndian.cmake +++ b/Modules/TestBigEndian.cmake @@ -21,7 +21,7 @@ MACRO(TEST_BIG_ENDIAN VARIABLE) IF("HAVE_${VARIABLE}" MATCHES "^HAVE_${VARIABLE}$") MESSAGE(STATUS "Check if the system is big endian") MESSAGE(STATUS "Searching 16 bit integer") - + INCLUDE(CheckTypeSize) CHECK_TYPE_SIZE("unsigned short" CMAKE_SIZEOF_UNSIGNED_SHORT) @@ -35,7 +35,7 @@ MACRO(TEST_BIG_ENDIAN VARIABLE) SET(CMAKE_16BIT_TYPE "unsigned int") ELSE(CMAKE_SIZEOF_UNSIGNED_INT) - + CHECK_TYPE_SIZE("unsigned long" CMAKE_SIZEOF_UNSIGNED_LONG) IF(CMAKE_SIZEOF_UNSIGNED_LONG) MESSAGE(STATUS "Using unsigned long") @@ -43,16 +43,16 @@ MACRO(TEST_BIG_ENDIAN VARIABLE) ELSE(CMAKE_SIZEOF_UNSIGNED_LONG) MESSAGE(FATAL_ERROR "no suitable type found") ENDIF(CMAKE_SIZEOF_UNSIGNED_LONG) - + ENDIF(CMAKE_SIZEOF_UNSIGNED_INT) - + ENDIF(CMAKE_SIZEOF_UNSIGNED_SHORT EQUAL 2) - - CONFIGURE_FILE("${CMAKE_ROOT}/Modules/TestEndianess.c.in" + + CONFIGURE_FILE("${CMAKE_ROOT}/Modules/TestEndianess.c.in" "${CMAKE_BINARY_DIR}${CMAKE_FILES_DIRECTORY}/CMakeTmp/TestEndianess.c" IMMEDIATE @ONLY) - + FILE(READ "${CMAKE_BINARY_DIR}${CMAKE_FILES_DIRECTORY}/CMakeTmp/TestEndianess.c" TEST_ENDIANESS_FILE_CONTENT) @@ -96,10 +96,10 @@ MACRO(TEST_BIG_ENDIAN VARIABLE) IF(NOT CMAKE_TEST_ENDIANESS_STRINGS_BE AND NOT CMAKE_TEST_ENDIANESS_STRINGS_LE) MESSAGE(SEND_ERROR "TEST_BIG_ENDIAN found no result!") ENDIF(NOT CMAKE_TEST_ENDIANESS_STRINGS_BE AND NOT CMAKE_TEST_ENDIANESS_STRINGS_LE) - + FILE(APPEND ${CMAKE_BINARY_DIR}${CMAKE_FILES_DIRECTORY}/CMakeError.log "Determining if the system is big endian passed with the following output:\n${OUTPUT}\nTestEndianess.c:\n${TEST_ENDIANESS_FILE_CONTENT}\n\n") - + ELSE(HAVE_${VARIABLE}) MESSAGE(STATUS "Check if the system is big endian - failed") FILE(APPEND ${CMAKE_BINARY_DIR}${CMAKE_FILES_DIRECTORY}/CMakeError.log diff --git a/Modules/TestCXXAcceptsFlag.cmake b/Modules/TestCXXAcceptsFlag.cmake index 52d0cf3..0d945bb 100644 --- a/Modules/TestCXXAcceptsFlag.cmake +++ b/Modules/TestCXXAcceptsFlag.cmake @@ -27,7 +27,7 @@ MACRO(CHECK_CXX_ACCEPTS_FLAG FLAGS VARIABLE) ${CMAKE_BINARY_DIR} ${CMAKE_ROOT}/Modules/DummyCXXFile.cxx CMAKE_FLAGS -DCOMPILE_DEFINITIONS:STRING=${FLAGS} - OUTPUT_VARIABLE OUTPUT) + OUTPUT_VARIABLE OUTPUT) IF(${VARIABLE}) MESSAGE(STATUS "Checking to see if CXX compiler accepts flag ${FLAGS} - yes") FILE(APPEND ${CMAKE_BINARY_DIR}${CMAKE_FILES_DIRECTORY}/CMakeOutput.log diff --git a/Modules/TestForANSIForScope.cmake b/Modules/TestForANSIForScope.cmake index ae2acef..a60719e 100644 --- a/Modules/TestForANSIForScope.cmake +++ b/Modules/TestForANSIForScope.cmake @@ -18,19 +18,19 @@ IF("CMAKE_ANSI_FOR_SCOPE" MATCHES "^CMAKE_ANSI_FOR_SCOPE$") MESSAGE(STATUS "Check for ANSI scope") - TRY_COMPILE(CMAKE_ANSI_FOR_SCOPE ${CMAKE_BINARY_DIR} + TRY_COMPILE(CMAKE_ANSI_FOR_SCOPE ${CMAKE_BINARY_DIR} ${CMAKE_ROOT}/Modules/TestForAnsiForScope.cxx OUTPUT_VARIABLE OUTPUT) IF (CMAKE_ANSI_FOR_SCOPE) MESSAGE(STATUS "Check for ANSI scope - found") - SET (CMAKE_NO_ANSI_FOR_SCOPE 0 CACHE INTERNAL + SET (CMAKE_NO_ANSI_FOR_SCOPE 0 CACHE INTERNAL "Does the compiler support ansi for scope.") FILE(APPEND ${CMAKE_BINARY_DIR}${CMAKE_FILES_DIRECTORY}/CMakeOutput.log "Determining if the CXX compiler understands ansi for scopes passed with " "the following output:\n${OUTPUT}\n\n") ELSE (CMAKE_ANSI_FOR_SCOPE) MESSAGE(STATUS "Check for ANSI scope - not found") - SET (CMAKE_NO_ANSI_FOR_SCOPE 1 CACHE INTERNAL + SET (CMAKE_NO_ANSI_FOR_SCOPE 1 CACHE INTERNAL "Does the compiler support ansi for scope.") FILE(APPEND ${CMAKE_BINARY_DIR}${CMAKE_FILES_DIRECTORY}/CMakeError.log "Determining if the CXX compiler understands ansi for scopes failed with " diff --git a/Modules/TestForANSIStreamHeaders.cmake b/Modules/TestForANSIStreamHeaders.cmake index 19c1ab2..b542b74 100644 --- a/Modules/TestForANSIStreamHeaders.cmake +++ b/Modules/TestForANSIStreamHeaders.cmake @@ -21,10 +21,10 @@ INCLUDE(CheckIncludeFileCXX) IF(NOT CMAKE_NO_ANSI_STREAM_HEADERS) CHECK_INCLUDE_FILE_CXX(iostream CMAKE_ANSI_STREAM_HEADERS) IF (CMAKE_ANSI_STREAM_HEADERS) - SET (CMAKE_NO_ANSI_STREAM_HEADERS 0 CACHE INTERNAL + SET (CMAKE_NO_ANSI_STREAM_HEADERS 0 CACHE INTERNAL "Does the compiler support headers like iostream.") - ELSE (CMAKE_ANSI_STREAM_HEADERS) - SET (CMAKE_NO_ANSI_STREAM_HEADERS 1 CACHE INTERNAL + ELSE (CMAKE_ANSI_STREAM_HEADERS) + SET (CMAKE_NO_ANSI_STREAM_HEADERS 1 CACHE INTERNAL "Does the compiler support headers like iostream.") ENDIF (CMAKE_ANSI_STREAM_HEADERS) diff --git a/Modules/TestForAnsiForScope.cxx b/Modules/TestForAnsiForScope.cxx index f2ec760..e8807ab 100644 --- a/Modules/TestForAnsiForScope.cxx +++ b/Modules/TestForAnsiForScope.cxx @@ -1,5 +1,5 @@ int main(int, char*[]) -{ +{ int i; for(int i=0; i < 1; ++i); (void)i; diff --git a/Modules/TestForSSTREAM.cmake b/Modules/TestForSSTREAM.cmake index 8dd53e7..30ff3bc 100644 --- a/Modules/TestForSSTREAM.cmake +++ b/Modules/TestForSSTREAM.cmake @@ -18,19 +18,19 @@ IF("CMAKE_HAS_ANSI_STRING_STREAM" MATCHES "^CMAKE_HAS_ANSI_STRING_STREAM$") MESSAGE(STATUS "Check for sstream") - TRY_COMPILE(CMAKE_HAS_ANSI_STRING_STREAM ${CMAKE_BINARY_DIR} + TRY_COMPILE(CMAKE_HAS_ANSI_STRING_STREAM ${CMAKE_BINARY_DIR} ${CMAKE_ROOT}/Modules/TestForSSTREAM.cxx OUTPUT_VARIABLE OUTPUT) IF (CMAKE_HAS_ANSI_STRING_STREAM) MESSAGE(STATUS "Check for sstream - found") - SET (CMAKE_NO_ANSI_STRING_STREAM 0 CACHE INTERNAL + SET (CMAKE_NO_ANSI_STRING_STREAM 0 CACHE INTERNAL "Does the compiler support sstream") FILE(APPEND ${CMAKE_BINARY_DIR}${CMAKE_FILES_DIRECTORY}/CMakeOutput.log "Determining if the CXX compiler has sstream passed with " "the following output:\n${OUTPUT}\n\n") ELSE (CMAKE_HAS_ANSI_STRING_STREAM) MESSAGE(STATUS "Check for sstream - not found") - SET (CMAKE_NO_ANSI_STRING_STREAM 1 CACHE INTERNAL + SET (CMAKE_NO_ANSI_STRING_STREAM 1 CACHE INTERNAL "Does the compiler support sstream") FILE(APPEND ${CMAKE_BINARY_DIR}${CMAKE_FILES_DIRECTORY}/CMakeError.log "Determining if the CXX compiler has sstream failed with " diff --git a/Modules/TestForSSTREAM.cxx b/Modules/TestForSSTREAM.cxx index af4a4bb..1c939da 100644 --- a/Modules/TestForSSTREAM.cxx +++ b/Modules/TestForSSTREAM.cxx @@ -1,6 +1,6 @@ #include <sstream> int main(int, char*[]) -{ +{ std::ostringstream os; os << "12345"; if(os.str().size() == 5) diff --git a/Modules/TestForSTDNamespace.cmake b/Modules/TestForSTDNamespace.cmake index 932d6e9..65e0de0 100644 --- a/Modules/TestForSTDNamespace.cmake +++ b/Modules/TestForSTDNamespace.cmake @@ -18,19 +18,19 @@ IF("CMAKE_STD_NAMESPACE" MATCHES "^CMAKE_STD_NAMESPACE$") MESSAGE(STATUS "Check for STD namespace") - TRY_COMPILE(CMAKE_STD_NAMESPACE ${CMAKE_BINARY_DIR} + TRY_COMPILE(CMAKE_STD_NAMESPACE ${CMAKE_BINARY_DIR} ${CMAKE_ROOT}/Modules/TestForSTDNamespace.cxx OUTPUT_VARIABLE OUTPUT) IF (CMAKE_STD_NAMESPACE) MESSAGE(STATUS "Check for STD namespace - found") - SET (CMAKE_NO_STD_NAMESPACE 0 CACHE INTERNAL + SET (CMAKE_NO_STD_NAMESPACE 0 CACHE INTERNAL "Does the compiler support std::.") FILE(APPEND ${CMAKE_BINARY_DIR}${CMAKE_FILES_DIRECTORY}/CMakeOutput.log "Determining if the CXX compiler has std namespace passed with " "the following output:\n${OUTPUT}\n\n") ELSE (CMAKE_STD_NAMESPACE) MESSAGE(STATUS "Check for STD namespace - not found") - SET (CMAKE_NO_STD_NAMESPACE 1 CACHE INTERNAL + SET (CMAKE_NO_STD_NAMESPACE 1 CACHE INTERNAL "Does the compiler support std::.") FILE(APPEND ${CMAKE_BINARY_DIR}${CMAKE_FILES_DIRECTORY}/CMakeError.log "Determining if the CXX compiler has std namespace failed with " diff --git a/Modules/TestForSTDNamespace.cxx b/Modules/TestForSTDNamespace.cxx index fc3ac59..b537d44 100644 --- a/Modules/TestForSTDNamespace.cxx +++ b/Modules/TestForSTDNamespace.cxx @@ -1,6 +1,6 @@ #include <list> int main(int, char*[]) -{ +{ std::list<int>(); return 0; } diff --git a/Modules/UseQt4.cmake b/Modules/UseQt4.cmake index 027504f..d4852a0 100644 --- a/Modules/UseQt4.cmake +++ b/Modules/UseQt4.cmake @@ -103,6 +103,6 @@ FOREACH(module QT3SUPPORT QTOPENGL QTASSISTANT QTDESIGNER QTMOTIF QTNSPLUGIN MESSAGE("Qt ${module} library not found.") ENDIF (QT_${module}_FOUND) ENDIF (QT_USE_${module} OR QT_USE_${module}_DEPENDS) - + ENDFOREACH(module) diff --git a/Modules/UseSWIG.cmake b/Modules/UseSWIG.cmake index ef76724..a7085ee 100644 --- a/Modules/UseSWIG.cmake +++ b/Modules/UseSWIG.cmake @@ -10,7 +10,7 @@ # Set Source files properties such as CPLUSPLUS and SWIG_FLAGS to specify # special behavior of SWIG. Also global CMAKE_SWIG_FLAGS can be used to add # special flags to all swig calls. -# Another special variable is CMAKE_SWIG_OUTDIR, it allows one to specify +# Another special variable is CMAKE_SWIG_OUTDIR, it allows one to specify # where to write all the swig generated module (swig -outdir option) # The name-specific variable SWIG_MODULE_<name>_EXTRA_DEPS may be used # to specify extra dependencies for the generated modules. @@ -52,7 +52,7 @@ MACRO(SWIG_MODULE_INITIALIZE name language) MESSAGE(FATAL_ERROR "SWIG Error: Language \"${language}\" not found") ELSEIF("${SWIG_MODULE_${name}_LANGUAGE}" STREQUAL "PYTHON") # when swig is used without the -interface it will produce in the module.py - # a 'import _modulename' statement, which implies having a corresponding + # a 'import _modulename' statement, which implies having a corresponding # _modulename.so (*NIX), _modulename.pyd (Win32). SET(SWIG_MODULE_${name}_REAL_NAME "_${name}") ELSEIF("${SWIG_MODULE_${name}_LANGUAGE}" STREQUAL "PERL") @@ -93,13 +93,13 @@ MACRO(SWIG_ADD_SOURCE_TO_MODULE name outfiles infile) ENDIF("${swig_source_file_flags}" STREQUAL "NOTFOUND") SET(swig_source_file_fullname "${infile}") IF(${swig_source_file_path} MATCHES "^${CMAKE_CURRENT_SOURCE_DIR}") - STRING(REGEX REPLACE + STRING(REGEX REPLACE "^${CMAKE_CURRENT_SOURCE_DIR}" "" swig_source_file_relative_path "${swig_source_file_path}") ELSE(${swig_source_file_path} MATCHES "^${CMAKE_CURRENT_SOURCE_DIR}") IF(${swig_source_file_path} MATCHES "^${CMAKE_CURRENT_BINARY_DIR}") - STRING(REGEX REPLACE + STRING(REGEX REPLACE "^${CMAKE_CURRENT_BINARY_DIR}" "" swig_source_file_relative_path "${swig_source_file_path}") @@ -178,7 +178,7 @@ MACRO(SWIG_ADD_SOURCE_TO_MODULE name outfiles infile) "${swig_source_file_fullname}" MAIN_DEPENDENCY "${swig_source_file_fullname}" DEPENDS ${SWIG_MODULE_${name}_EXTRA_DEPS} - COMMENT "Swig source") + COMMENT "Swig source") SET_SOURCE_FILES_PROPERTIES("${swig_generated_file_fullname}" ${swig_extra_generated_files} PROPERTIES GENERATED 1) SET(${outfiles} "${swig_generated_file_fullname}" ${swig_extra_generated_files}) |