diff options
Diffstat (limited to 'Modules')
| -rw-r--r-- | Modules/CMakePackageConfigHelpers.cmake | 189 | ||||
| -rw-r--r-- | Modules/CPack.cmake | 14 | ||||
| -rw-r--r-- | Modules/CPackNSIS.cmake | 19 | ||||
| -rw-r--r-- | Modules/DeployQt4.cmake | 6 | ||||
| -rw-r--r-- | Modules/FindCxxTest.cmake | 6 | ||||
| -rw-r--r-- | Modules/WriteBasicConfigVersionFile.cmake | 27 |
6 files changed, 223 insertions, 38 deletions
diff --git a/Modules/CMakePackageConfigHelpers.cmake b/Modules/CMakePackageConfigHelpers.cmake new file mode 100644 index 0000000..b174e98 --- /dev/null +++ b/Modules/CMakePackageConfigHelpers.cmake @@ -0,0 +1,189 @@ +# - CONFIGURE_PACKAGE_CONFIG_FILE(), WRITE_BASIC_PACKAGE_VERSION_FILE() +# +# CONFIGURE_PACKAGE_CONFIG_FILE(<input> <output> INSTALL_DESTINATION <path> +# [PATH_VARS <var1> <var2> ... <varN>] +# [NO_SET_AND_CHECK_MACRO] ) +# +# CONFIGURE_PACKAGE_CONFIG_FILE() should be used instead of the plain +# CONFIGURE_FILE() command when creating the <Name>Config.cmake or <Name>-config.cmake +# file for installing a project or library. It helps making the resulting package +# relocatable by avoiding hardcoded paths in the installed Config.cmake file. +# +# In a FooConfig.cmake file there may be code like this to make the +# install destinations know to the using project: +# set(FOO_INCLUDE_DIR "@CMAKE_INSTALL_FULL_INCLUDEDIR@" ) +# set(FOO_DATA_DIR "@CMAKE_INSTALL_PREFIX@/@RELATIVE_DATA_INSTALL_DIR@" ) +# set(FOO_ICONS_DIR "@CMAKE_INSTALL_PREFIX@/share/icons" ) +# ...logic to determine installedPrefix from the own location... +# set(FOO_CONFIG_DIR "${installedPrefix}/@CONFIG_INSTALL_DIR@" ) +# All 4 options shown above are not sufficient, since the first 3 hardcode +# the absolute directory locations, and the 4th case works only if the logic +# to determine the installedPrefix is correct, and if CONFIG_INSTALL_DIR contains +# a relative path, which in general cannot be guaranteed. +# This has the effect that the resulting FooConfig.cmake file would work poorly +# under Windows and OSX, where users are used to choose the install location +# of a binary package at install time, independent from how CMAKE_INSTALL_PREFIX +# was set at build/cmake time. +# +# Using CONFIGURE_PACKAGE_CONFIG_FILE() helps. If used correctly, it makes the +# resulting FooConfig.cmake file relocatable. +# Usage: +# 1. write a FooConfig.cmake.in file as you are used to +# 2. insert a line containing only the string "@PACKAGE_INIT@" +# 3. instead of SET(FOO_DIR "@SOME_INSTALL_DIR@"), use SET(FOO_DIR "@PACKAGE_SOME_INSTALL_DIR@") +# (this must be after the @PACKAGE_INIT@ line) +# 4. instead of using the normal CONFIGURE_FILE(), use CONFIGURE_PACKAGE_CONFIG_FILE() +# +# The <input> and <output> arguments are the input and output file, the same way +# as in CONFIGURE_FILE(). +# +# The <path> given to INSTALL_DESTINATION must be the destination where the FooConfig.cmake +# file will be installed to. This can either be a relative or absolute path, both work. +# +# The variables <var1> to <varN> given as PATH_VARS are the variables which contain +# install destinations. For each of them the macro will create a helper variable +# PACKAGE_<var...>. These helper variables must be used +# in the FooConfig.cmake.in file for setting the installed location. They are calculated +# by CONFIGURE_PACKAGE_CONFIG_FILE() so that they are always relative to the +# installed location of the package. This works both for relative and also for absolute locations. +# For absolute locations it works only if the absolute location is a subdirectory +# of CMAKE_INSTALL_PREFIX. +# +# By default configure_package_config_file() also generates a macro set_and_check() +# into the FooConfig.cmake file. This should be used instead of the normal set() +# command for setting directories and file locations. Additionally to setting the +# variable it also checks that the referenced file or directory actually exists +# and fails with a FATAL_ERROR otherwise. This makes sure that the created +# FooConfig.cmake file does not contain wrong references. +# When using the NO_SET_AND_CHECK_MACRO, this macro is not generated into the +# FooConfig.cmake file. +# +# For an example see below the documentation for WRITE_BASIC_PACKAGE_VERSION_FILE(). +# +# +# WRITE_BASIC_PACKAGE_VERSION_FILE( filename VERSION major.minor.patch COMPATIBILITY (AnyNewerVersion|SameMajorVersion) ) +# +# Writes a file for use as <package>ConfigVersion.cmake file to <filename>. +# See the documentation of FIND_PACKAGE() for details on this. +# filename is the output filename, it should be in the build tree. +# major.minor.patch is the version number of the project to be installed +# The COMPATIBILITY mode AnyNewerVersion means that the installed package version +# will be considered compatible if it is newer or exactly the same as the requested version. +# If SameMajorVersion is used instead, then the behaviour differs from AnyNewerVersion +# in that the major version number must be the same as requested, e.g. version 2.0 will +# not be considered compatible if 1.0 is requested. +# If your project has more elaborated version matching rules, you will need to write your +# own custom ConfigVersion.cmake file instead of using this macro. +# +# Internally, this macro executes configure_file() to create the resulting +# version file. Depending on the COMPATIBLITY, either the file +# BasicConfigVersion-SameMajorVersion.cmake.in or BasicConfigVersion-AnyNewerVersion.cmake.in +# is used. Please note that these two files are internal to CMake and you should +# not call configure_file() on them yourself, but they can be used as starting +# point to create more sophisticted custom ConfigVersion.cmake files. +# +# +# Example using both configure_package_config_file() and write_basic_package_version_file(): +# CMakeLists.txt: +# set(INCLUDE_INSTALL_DIR include/ ... CACHE ) +# set(LIB_INSTALL_DIR lib/ ... CACHE ) +# set(SYSCONFIG_INSTALL_DIR etc/foo/ ... CACHE ) +# ... +# include(CMakePackageConfigHelpers) +# configure_package_config_file(FooConfig.cmake.in ${CMAKE_CURRENT_BINARY_DIR}/FooConfig.cmake +# INSTALL_DESTINATION ${LIB_INSTALL_DIR}/Foo/cmake +# PATH_VARS INCLUDE_INSTALL_DIR SYSCONFIG_INSTALL_DIR) +# write_basic_package_version_file(${CMAKE_CURRENT_BINARY_DIR}/FooConfigVersion.cmake +# VERSION 1.2.3 +# COMPATIBILITY SameMajorVersion ) +# install(FILES ${CMAKE_CURRENT_BINARY_DIR}/FooConfig.cmake ${CMAKE_CURRENT_BINARY_DIR}/FooConfigVersion.cmake +# DESTINATION ${LIB_INSTALL_DIR}/Foo/cmake ) +# +# With a FooConfig.cmake.in: +# set(FOO_VERSION x.y.z) +# ... +# @PACKAGE_INIT@ +# ... +# set_and_check(FOO_INCLUDE_DIR "@PACKAGE_INCLUDE_INSTALL_DIR@") +# set_and_check(FOO_SYSCONFIG_DIR "@PACKAGE_SYSCONFIG_INSTALL_DIR@") + + +#============================================================================= +# Copyright 2012 Alexander Neundorf <neundorf@kde.org> +# +# Distributed under the OSI-approved BSD License (the "License"); +# see accompanying file Copyright.txt for details. +# +# This software is distributed WITHOUT ANY WARRANTY; without even the +# implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. +# See the License for more information. +#============================================================================= +# (To distribute this file outside of CMake, substitute the full +# License text for the above reference.) + +include(CMakeParseArguments) + +include(WriteBasicConfigVersionFile) + +macro(WRITE_BASIC_PACKAGE_VERSION_FILE) + write_basic_config_version_file(${ARGN}) +endmacro() + + +function(CONFIGURE_PACKAGE_CONFIG_FILE _inputFile _outputFile) + set(options NO_SET_AND_CHECK_MACRO) + set(oneValueArgs INSTALL_DESTINATION ) + set(multiValueArgs PATH_VARS ) + + cmake_parse_arguments(CCF "${options}" "${oneValueArgs}" "${multiValueArgs}" ${ARGN}) + + if(CCF_UNPARSED_ARGUMENTS) + message(FATAL_ERROR "Unknown keywords given to CONFIGURE_PACKAGE_CONFIG_FILE(): \"${CCF_UNPARSED_ARGUMENTS}\"") + endif() + + if(NOT CCF_INSTALL_DESTINATION) + message(FATAL_ERROR "No INSTALL_DESTINATION given to CONFIGURE_PACKAGE_CONFIG_FILE()") + endif() + + if(IS_ABSOLUTE "${CCF_INSTALL_DESTINATION}") + set(absInstallDir "${CCF_INSTALL_DESTINATION}") + else() + set(absInstallDir "${CMAKE_INSTALL_PREFIX}/${CCF_INSTALL_DESTINATION}") + endif() + file(RELATIVE_PATH PACKAGE_RELATIVE_PATH "${absInstallDir}" "${CMAKE_INSTALL_PREFIX}" ) + + foreach(var ${CCF_PATH_VARS}) + if(NOT DEFINED ${var}) + message(FATAL_ERROR "Variable ${var} does not exist") + else() + if(IS_ABSOLUTE "${${var}}") + string(REPLACE "${CMAKE_INSTALL_PREFIX}" "\${PACKAGE_PREFIX_DIR}" + PACKAGE_${var} "${${var}}") + else() + set(PACKAGE_${var} "\${PACKAGE_PREFIX_DIR}/${${var}}") + endif() + endif() + endforeach() + + set(PACKAGE_INIT " +####### Expanded from @PACKAGE_INIT@ by configure_package_config_file() ####### +get_filename_component(PACKAGE_PREFIX_DIR \"\${CMAKE_CURRENT_LIST_DIR}/${PACKAGE_RELATIVE_PATH}\" ABSOLUTE) +") + + if(NOT CCF_NO_SET_AND_CHECK_MACRO) + set(PACKAGE_INIT "${PACKAGE_INIT} +macro(set_and_check _var _file) + set(\${_var} \"\${_file}\") + if(NOT EXISTS \"\${_file}\") + message(FATAL_ERROR \"File or directory \${_file} referenced by variable \${_var} does not exist !\") + endif() +endmacro() +") + endif() + + set(PACKAGE_INIT "${PACKAGE_INIT} +####################################################################################") + + configure_file("${_inputFile}" "${_outputFile}" @ONLY) + +endfunction() diff --git a/Modules/CPack.cmake b/Modules/CPack.cmake index b506711..571770e 100644 --- a/Modules/CPack.cmake +++ b/Modules/CPack.cmake @@ -101,6 +101,11 @@ ##end # ##variable +# CPACK_PACKAGE_ICON - A branding image that will be displayed inside +# the installer (used by GUI installers). +##end +# +##variable # CPACK_PROJECT_CONFIG_FILE - CPack-time project CPack configuration # file. This file included at cpack time, once per # generator after CPack has set CPACK_GENERATOR to the actual generator @@ -247,6 +252,15 @@ # CPACK_INSTALLED_DIRECTORIES - Extra directories to install. ##end # +##variable +# CPACK_PACKAGE_INSTALL_REGISTRY_KEY - Registry key used when +# installing this project. This is only used +# by installer for Windows. +##end +##variable +# CPACK_CREATE_DESKTOP_LINKS - List of desktop links to create. +##end +# #============================================================================= # Copyright 2006-2009 Kitware, Inc. diff --git a/Modules/CPackNSIS.cmake b/Modules/CPackNSIS.cmake index 97179d7..7d9f29b 100644 --- a/Modules/CPackNSIS.cmake +++ b/Modules/CPackNSIS.cmake @@ -8,11 +8,6 @@ ##end # ##variable -# CPACK_PACKAGE_INSTALL_REGISTRY_KEY - Registry key used when -# installing this project. -##end -# -##variable # CPACK_NSIS_INSTALL_ROOT - The default installation directory presented # to the end user by the NSIS installer is under this root dir. The full # directory presented to the end user is: @@ -30,11 +25,6 @@ ##end # ##variable -# CPACK_PACKAGE_ICON - A branding image that will be displayed inside -# the installer. -##end -# -##variable # CPACK_NSIS_EXTRA_INSTALL_COMMANDS - Extra NSIS commands that will # be added to the install Section. ##end @@ -107,6 +97,15 @@ # CPACK_NSIS_MUI_FINISHPAGE_RUN - Specify an executable to add an option # to run on the finish page of the NSIS installer. ##end +##variable +# CPACK_NSIS_MENU_LINKS - Specify links in [application] menu. +# This should contain a list of pair "link" "link name". The link +# may be an URL or a path relative to installation prefix. +# Like: +# set(CPACK_NSIS_MENU_LINKS +# "doc/cmake-@CMake_VERSION_MAJOR@.@CMake_VERSION_MINOR@/cmake.html" "CMake Help" +# "http://www.cmake.org" "CMake Web Site") +##end #============================================================================= # Copyright 2006-2009 Kitware, Inc. diff --git a/Modules/DeployQt4.cmake b/Modules/DeployQt4.cmake index 8a5e9c5..b37695d 100644 --- a/Modules/DeployQt4.cmake +++ b/Modules/DeployQt4.cmake @@ -126,6 +126,9 @@ function(fixup_qt4_executable executable) if(QT_LIBRARY_DIR) list(APPEND dirs "${QT_LIBRARY_DIR}") endif() + if(QT_BINARY_DIR) + list(APPEND dirs "${QT_BINARY_DIR}") + endif() if(APPLE) set(qt_conf_dir "${executable}/Contents/Resources") @@ -258,6 +261,9 @@ function(install_qt4_executable executable) if(QT_LIBRARY_DIR) list(APPEND dirs "${QT_LIBRARY_DIR}") endif() + if(QT_BINARY_DIR) + list(APPEND dirs "${QT_BINARY_DIR}") + endif() if(component) set(component COMPONENT ${component}) else() diff --git a/Modules/FindCxxTest.cmake b/Modules/FindCxxTest.cmake index 4ff310c..a4d1504 100644 --- a/Modules/FindCxxTest.cmake +++ b/Modules/FindCxxTest.cmake @@ -9,6 +9,7 @@ # Only used in the case both Python & Perl # are detected on the system to control # which CxxTest code generator is used. +# Valid only for CxxTest version 3. # # NOTE: In older versions of this Find Module, # this variable controlled if the Python test @@ -159,7 +160,8 @@ find_package(PythonInterp QUIET) find_package(Perl QUIET) find_path(CXXTEST_INCLUDE_DIR cxxtest/TestSuite.h) -find_program(CXXTEST_PYTHON_TESTGEN_EXECUTABLE cxxtestgen.py +find_program(CXXTEST_PYTHON_TESTGEN_EXECUTABLE + NAMES cxxtestgen cxxtestgen.py PATHS ${CXXTEST_INCLUDE_DIR}) find_program(CXXTEST_PERL_TESTGEN_EXECUTABLE cxxtestgen.pl PATHS ${CXXTEST_INCLUDE_DIR}) @@ -167,7 +169,7 @@ find_program(CXXTEST_PERL_TESTGEN_EXECUTABLE cxxtestgen.pl if(PYTHONINTERP_FOUND OR PERL_FOUND) include(${CMAKE_CURRENT_LIST_DIR}/FindPackageHandleStandardArgs.cmake) - if(PYTHONINTERP_FOUND AND (CXXTEST_USE_PYTHON OR NOT PERL_FOUND)) + if(PYTHONINTERP_FOUND AND (CXXTEST_USE_PYTHON OR NOT PERL_FOUND OR NOT DEFINED CXXTEST_USE_PYTHON)) set(CXXTEST_TESTGEN_EXECUTABLE ${CXXTEST_PYTHON_TESTGEN_EXECUTABLE}) set(CXXTEST_TESTGEN_INTERPRETER ${PYTHON_EXECUTABLE}) FIND_PACKAGE_HANDLE_STANDARD_ARGS(CxxTest DEFAULT_MSG diff --git a/Modules/WriteBasicConfigVersionFile.cmake b/Modules/WriteBasicConfigVersionFile.cmake index 0b6519d..038cb57 100644 --- a/Modules/WriteBasicConfigVersionFile.cmake +++ b/Modules/WriteBasicConfigVersionFile.cmake @@ -1,31 +1,6 @@ # WRITE_BASIC_CONFIG_VERSION_FILE( filename VERSION major.minor.patch COMPATIBILITY (AnyNewerVersion|SameMajorVersion) ) # -# Writes a file for use as <package>ConfigVersion.cmake file to <filename>. -# See the documentation of FIND_PACKAGE() for details on this. -# filename is the output filename, it should be in the build tree. -# major.minor.patch is the version number of the project to be installed -# The COMPATIBILITY mode AnyNewerVersion means that the installed package version -# will be considered compatible if it is newer or exactly the same as the requested version. -# If SameMajorVersion is used instead, then the behaviour differs from AnyNewerVersion -# in that the major version number must be the same as requested, e.g. version 2.0 will -# not be considered compatible if 1.0 is requested. -# If your project has more elaborated version matching rules, you will need to write your -# own custom ConfigVersion.cmake file instead of using this macro. -# -# Example: -# write_basic_config_version_file(${CMAKE_CURRENT_BINARY_DIR}/FooConfigVersion.cmake -# VERSION 1.2.3 -# COMPATIBILITY SameMajorVersion ) -# install(FILES ${CMAKE_CURRENT_BINARY_DIR}/FooConfigVersion.cmake -# ${CMAKE_CURRENT_BINARY_DIR}/FooConfig.cmake -# DESTINATION lib/cmake/Foo ) -# -# Internally, this macro executes configure_file() to create the resulting -# version file. Depending on the COMPATIBLITY, either the file -# BasicConfigVersion-SameMajorVersion.cmake.in or BasicConfigVersion-AnyNewerVersion.cmake.in -# is used. Please note that these two files are internal to CMake and you should -# not call configure_file() on them yourself, but they can be used as starting -# point to create more sophisticted custom ConfigVersion.cmake files. +# Deprecated, see WRITE_BASIC_PACKAGE_VERSION_FILE(), it is identical. #============================================================================= # Copyright 2008-2011 Alexander Neundorf, <neundorf@kde.org> |