diff options
Diffstat (limited to 'Tests/CMakeLists.txt')
| -rw-r--r-- | Tests/CMakeLists.txt | 168 |
1 files changed, 127 insertions, 41 deletions
diff --git a/Tests/CMakeLists.txt b/Tests/CMakeLists.txt index 9c3ed59..d4a55fc 100644 --- a/Tests/CMakeLists.txt +++ b/Tests/CMakeLists.txt @@ -246,6 +246,7 @@ if(BUILD_TESTING) ADD_TEST_MACRO(CompileOptions CompileOptions) ADD_TEST_MACRO(CompatibleInterface CompatibleInterface) ADD_TEST_MACRO(AliasTarget AliasTarget) + ADD_TEST_MACRO(InterfaceLibrary InterfaceLibrary) set_tests_properties(EmptyLibrary PROPERTIES PASS_REGULAR_EXPRESSION "CMake Error: CMake can not determine linker language for target: test") ADD_TEST_MACRO(CrossCompile CrossCompile) @@ -260,10 +261,27 @@ if(BUILD_TESTING) PASS_REGULAR_EXPRESSION "(file is not of required architecture|does not match cputype|not the architecture being linked)") endif() + if(CMAKE_TEST_GENERATOR MATCHES Make) + set(InterfaceBuildTargets_libname testlib) + if (CMAKE_TEST_GENERATOR MATCHES "Borland|Watcom") + set(InterfaceBuildTargets_libname testlib.lib) + endif() + add_test(InterfaceBuildTargets ${CMAKE_CTEST_COMMAND} + --build-and-test + "${CMake_SOURCE_DIR}/Tests/InterfaceBuildTargets" + "${CMake_BINARY_DIR}/Tests/InterfaceBuildTargets" + --build-two-config + ${build_generator_args} + --build-project InterfaceBuildTargets + --test-command ${CMAKE_CMAKE_COMMAND} -E touch_nocreate ${InterfaceBuildTargets_libname} + ) + list(APPEND TEST_BUILD_DIRS "${CMake_BINARY_DIR}/Tests/InterfaceBuildTargets") + endif() + list(APPEND TEST_BUILD_DIRS ${CMake_TEST_INSTALL_PREFIX}) if(NOT QT4_FOUND) - find_package(Qt4) + find_package(Qt4 QUIET) endif() if(QT4_FOUND) @@ -507,9 +525,6 @@ if(BUILD_TESTING) list(APPEND TEST_BUILD_DIRS "${CMake_BINARY_DIR}/Tests/SubProject") endif() - if (CMAKE_STRICT) - ADD_TEST_MACRO(DocTest DocTest) - endif () # macro to add a test that will build a nightly release # of CMake for given platform using the release scripts macro(ADD_NIGHTLY_BUILD_TEST name script) @@ -604,6 +619,7 @@ ${CMake_BINARY_DIR}/bin/cmake -DVERSION=master -P ${CMake_SOURCE_DIR}/Utilities/ ${build_generator_args} --build-project GeneratorExpression --build-options -DCMAKE_BUILD_TYPE=\${CTEST_CONFIGURATION_TYPE} + --test-command ${CMAKE_CTEST_COMMAND} -C \${CTEST_CONFIGURATION_TYPE} -V ) list(APPEND TEST_BUILD_DIRS "${CMake_BINARY_DIR}/Tests/GeneratorExpression") @@ -1013,34 +1029,43 @@ ${CMake_BINARY_DIR}/bin/cmake -DVERSION=master -P ${CMake_SOURCE_DIR}/Utilities/ ) list(APPEND TEST_BUILD_DIRS "${CMake_BINARY_DIR}/Tests/QtAutomocNoQt") + # On Windows there is no RPATH, so while Qt might be available for building, + # the required dlls may not be in the PATH, so we can't run the executables + # on that platform. + if(WIN32) + set(run_autogen_test ${CMAKE_CTEST_COMMAND} -V) + else() + set(run_autogen_test QtAutogen) + endif() + find_package(Qt5Widgets QUIET NO_MODULE) if(Qt5Widgets_FOUND) - add_test(Qt5Automoc ${CMAKE_CTEST_COMMAND} + add_test(Qt5Autogen ${CMAKE_CTEST_COMMAND} --build-and-test - "${CMake_SOURCE_DIR}/Tests/QtAutomoc" - "${CMake_BINARY_DIR}/Tests/Qt5Automoc" + "${CMake_SOURCE_DIR}/Tests/QtAutogen" + "${CMake_BINARY_DIR}/Tests/Qt5Autogen" ${build_generator_args} - --build-project QtAutomoc - --build-exe-dir "${CMake_BINARY_DIR}/Tests/Qt5Automoc" + --build-project QtAutogen + --build-exe-dir "${CMake_BINARY_DIR}/Tests/Qt5Autogen" --force-new-ctest-process --build-options -DQT_QMAKE_EXECUTABLE:FILEPATH=${QT_QMAKE_EXECUTABLE} -DQT_TEST_VERSION=5 - --test-command ${CMAKE_CTEST_COMMAND} -V + --test-command ${run_autogen_test} ) - list(APPEND TEST_BUILD_DIRS "${CMake_BINARY_DIR}/Tests/Qt5Automoc") + list(APPEND TEST_BUILD_DIRS "${CMake_BINARY_DIR}/Tests/Qt5Autogen") endif() if(QT4_WORKS AND QT_QTGUI_FOUND) - add_test(Qt4Automoc ${CMAKE_CTEST_COMMAND} + add_test(Qt4Autogen ${CMAKE_CTEST_COMMAND} --build-and-test - "${CMake_SOURCE_DIR}/Tests/QtAutomoc" - "${CMake_BINARY_DIR}/Tests/Qt4Automoc" + "${CMake_SOURCE_DIR}/Tests/QtAutogen" + "${CMake_BINARY_DIR}/Tests/Qt4Autogen" ${build_generator_args} - --build-project QtAutomoc - --build-exe-dir "${CMake_BINARY_DIR}/Tests/Qt4Automoc" + --build-project QtAutogen + --build-exe-dir "${CMake_BINARY_DIR}/Tests/Qt4Autogen" --force-new-ctest-process --build-options -DQT_QMAKE_EXECUTABLE:FILEPATH=${QT_QMAKE_EXECUTABLE} -DQT_TEST_VERSION=4 - --test-command ${CMAKE_CTEST_COMMAND} -V + --test-command ${run_autogen_test} ) - list(APPEND TEST_BUILD_DIRS "${CMake_BINARY_DIR}/Tests/Qt4Automoc") + list(APPEND TEST_BUILD_DIRS "${CMake_BINARY_DIR}/Tests/Qt4Autogen") add_test(Qt4Targets ${CMAKE_CTEST_COMMAND} --build-and-test @@ -1070,6 +1095,11 @@ ${CMake_BINARY_DIR}/bin/cmake -DVERSION=master -P ${CMake_SOURCE_DIR}/Utilities/ endif() endif() + find_package(GTK2 QUIET) + if(GTK2_FOUND) + add_subdirectory(FindGTK2) + endif() + add_test(ExternalProject ${CMAKE_CTEST_COMMAND} --build-and-test "${CMake_SOURCE_DIR}/Tests/ExternalProject" @@ -1856,6 +1886,26 @@ ${CMake_BINARY_DIR}/bin/cmake -DVERSION=master -P ${CMake_SOURCE_DIR}/Utilities/ ) list(APPEND TEST_BUILD_DIRS "${CMake_BINARY_DIR}/Tests/${CTestUpdateHG_DIR}") endif() + + # Test CTest Update with P4 + find_program(P4_EXECUTABLE NAMES p4) + find_program(P4D_EXECUTABLE NAMES p4d) + mark_as_advanced(P4_EXECUTABLE P4D_EXECUTABLE) + set(CTEST_TEST_UPDATE_P4 0) + if(P4_EXECUTABLE AND P4D_EXECUTABLE) + if(NOT "${P4_EXECUTABLE};${P4D_EXECUTABLE}" MATCHES "cygwin" OR UNIX) + set(CTEST_TEST_UPDATE_P4 1) + endif() + endif() + if(CTEST_TEST_UPDATE_P4) + set(CTestUpdateP4_DIR "CTest UpdateP4") + configure_file("${CMake_SOURCE_DIR}/Tests/CTestUpdateP4.cmake.in" + "${CMake_BINARY_DIR}/Tests/CTestUpdateP4.cmake" @ONLY) + add_test(CTest.UpdateP4 ${CMAKE_CMAKE_COMMAND} + -P "${CMake_BINARY_DIR}/Tests/CTestUpdateP4.cmake" + ) + list(APPEND TEST_BUILD_DIRS "${CMake_BINARY_DIR}/Tests/${CTestUpdateP4_DIR}") + endif() endif() configure_file( @@ -1893,6 +1943,17 @@ ${CMake_BINARY_DIR}/bin/cmake -DVERSION=master -P ${CMake_SOURCE_DIR}/Utilities/ PASS_REGULAR_EXPRESSION "Upload\\.xml") configure_file( + "${CMake_SOURCE_DIR}/Tests/CTestTestEmptyBinaryDirectory/test.cmake.in" + "${CMake_BINARY_DIR}/Tests/CTestTestEmptyBinaryDirectory/test.cmake" + @ONLY ESCAPE_QUOTES) + add_test(CTestTestEmptyBinaryDirectory ${CMAKE_CTEST_COMMAND} + -S "${CMake_BINARY_DIR}/Tests/CTestTestEmptyBinaryDirectory/test.cmake" -V + --output-log "${CMake_BINARY_DIR}/Tests/CTestTestEmptyBinaryDirectory/testOut.log" + ) + set_tests_properties(CTestTestEmptyBinaryDirectory PROPERTIES + PASS_REGULAR_EXPRESSION "TEST_SUCCESS") + + configure_file( "${CMake_SOURCE_DIR}/Tests/CTestTestConfigFileInBuildDir/test1.cmake.in" "${CMake_BINARY_DIR}/Tests/CTestTestConfigFileInBuildDir1/test1.cmake" @ONLY ESCAPE_QUOTES) @@ -1959,12 +2020,26 @@ ${CMake_BINARY_DIR}/bin/cmake -DVERSION=master -P ${CMake_SOURCE_DIR}/Utilities/ PASS_REGULAR_EXPRESSION "Process file.*XINDEX.m.*Total LOC:.*125.*Percentage Coverage: 85.60.*" ENVIRONMENT COVFILE=) - # Use macro, not function so that build can still be driven by CMake 2.4. - # After 2.6 is required, this could be a function without the extra 'set' - # calls. - # - macro(add_config_tests cfg) - set(cfg "${cfg}") + + # Adding a test case for Python Coverage + configure_file( + "${CMake_SOURCE_DIR}/Tests/PythonCoverage/coverage.xml.in" + "${CMake_BINARY_DIR}/Testing/PythonCoverage/coverage.xml") + configure_file( + "${CMake_SOURCE_DIR}/Tests/PythonCoverage/DartConfiguration.tcl.in" + "${CMake_BINARY_DIR}/Testing/PythonCoverage/DartConfiguration.tcl") + file(COPY "${CMake_SOURCE_DIR}/Tests/PythonCoverage/coveragetest" + DESTINATION "${CMake_BINARY_DIR}/Testing/PythonCoverage") + add_test(NAME CTestPythonCoverage + COMMAND cmake -E chdir + ${CMake_BINARY_DIR}/Testing/PythonCoverage + $<TARGET_FILE:ctest> -T Coverage --debug) + set_tests_properties(CTestPythonCoverage PROPERTIES + PASS_REGULAR_EXPRESSION + "Process file.*foo.py.*Total LOC:.*13.*Percentage Coverage: 84.62.*" + ENVIRONMENT COVFILE=) + + function(add_config_tests cfg) set(base "${CMake_BINARY_DIR}/Tests/CTestConfig") # Test -S script with a -C config arg to ctest: @@ -1988,7 +2063,7 @@ ${CMake_BINARY_DIR}/bin/cmake -DVERSION=master -P ${CMake_SOURCE_DIR}/Utilities/ add_test(CTestConfig.Dashboard.${cfg} ${CMAKE_CMAKE_COMMAND} -P "${base}/${cfg}-dashboard.cmake" -VV ) - endmacro() + endfunction() add_config_tests(Debug) add_config_tests(MinSizeRel) @@ -2056,6 +2131,9 @@ ${CMake_BINARY_DIR}/bin/cmake -DVERSION=master -P ${CMake_SOURCE_DIR}/Utilities/ --output-log "${CMake_BINARY_DIR}/Tests/CTestTestParallel/testOutput.log" ) + ADD_TEST_MACRO(CTestTestSerialInDepends ${CMAKE_CTEST_COMMAND} -j 4 + --output-on-failure -C "\${CTestTest_CONFIG}") + if(NOT BORLAND) set(CTestLimitDashJ_EXTRA_OPTIONS --force-new-ctest-process) add_test_macro(CTestLimitDashJ ${CMAKE_CTEST_COMMAND} -j 4 @@ -2139,6 +2217,13 @@ ${CMake_BINARY_DIR}/bin/cmake -DVERSION=master -P ${CMake_SOURCE_DIR}/Utilities/ set_tests_properties(CTestTestTimeout PROPERTIES PASS_REGULAR_EXPRESSION "TestTimeout *\\.+ *\\*\\*\\*Timeout.*CheckChild *\\.+ *Passed") + add_test( + NAME CTestTestRerunFailed + COMMAND ${CMAKE_CTEST_COMMAND} --rerun-failed) + set_tests_properties(CTestTestRerunFailed PROPERTIES + PASS_REGULAR_EXPRESSION "1/1 Test #1: TestTimeout" DEPENDS CTestTestTimeout + WORKING_DIRECTORY ${CMake_BINARY_DIR}/Tests/CTestTestTimeout) + configure_file( "${CMake_SOURCE_DIR}/Tests/CTestTestZeroTimeout/test.cmake.in" "${CMake_BINARY_DIR}/Tests/CTestTestZeroTimeout/test.cmake" @@ -2198,20 +2283,11 @@ ${CMake_BINARY_DIR}/bin/cmake -DVERSION=master -P ${CMake_SOURCE_DIR}/Utilities/ --output-log "${CMake_BINARY_DIR}/Tests/CTestTestFdSetSize/testOutput.log" ) - # Use macro, not function so that build can still be driven by CMake 2.4. - # After 2.6 is required, this could be a function without the extra 'set' - # calls. - # - macro(add_failed_submit_test name source build in out log regex) - # Have variables named source, build and drop_method because the - # configure_file call expects those variables to be defined. - # - set(source "${source}") - set(build "${build}") + function(add_failed_submit_test name source build in out log regex) configure_file("${in}" "${out}" @ONLY) add_test(${name} ${CMAKE_CTEST_COMMAND} -S "${out}" -V --output-log "${log}") set_tests_properties(${name} PROPERTIES PASS_REGULAR_EXPRESSION "${regex}") - endmacro() + endfunction() set(regex "(Problems when submitting via S*CP") set(regex "${regex}|Error message was: ") @@ -2279,6 +2355,17 @@ ${CMake_BINARY_DIR}/bin/cmake -DVERSION=master -P ${CMake_SOURCE_DIR}/Utilities/ --output-log "${CMake_BINARY_DIR}/Tests/CTestTest2/testOutput.log" ) + if("${CMAKE_TEST_GENERATOR}" MATCHES "Makefiles" OR "${CMAKE_TEST_GENERATOR}" MATCHES "Ninja") + configure_file("${CMake_SOURCE_DIR}/Tests/CTestTestLaunchers/test.cmake.in" + "${CMake_BINARY_DIR}/Tests/CTestTestLaunchers/test.cmake" @ONLY ESCAPE_QUOTES) + add_test(CTestTestLaunchers ${CMAKE_CTEST_COMMAND} + -S "${CMake_BINARY_DIR}/Tests/CTestTestLaunchers/test.cmake" -V + --output-log "${CMake_BINARY_DIR}/Tests/CTestTestLaunchers/testOutput.log" + ) + set_tests_properties(CTestTestLaunchers PROPERTIES + PASS_REGULAR_EXPRESSION "CTEST_TEST_LAUNCHER_SUCCESS") + endif() + configure_file("${CMake_SOURCE_DIR}/Tests/CTestTestChecksum/test.cmake.in" "${CMake_BINARY_DIR}/Tests/CTestTestChecksum/test.cmake" @ONLY ESCAPE_QUOTES) @@ -2493,11 +2580,10 @@ ${CMake_BINARY_DIR}/bin/cmake -DVERSION=master -P ${CMake_SOURCE_DIR}/Utilities/ ) endif() - add_test(CMakeWizardTest ${CMAKE_CMAKE_COMMAND} - -D build_dir:STRING=${CMAKE_CURRENT_BINARY_DIR}/CMakeWizardTest - -D source_dir:STRING=${CMAKE_CURRENT_SOURCE_DIR}/Tutorial/Step3 - -D CMAKE_CTEST_COMMAND:STRING=${CMAKE_CTEST_COMMAND} - -P ${CMAKE_CURRENT_SOURCE_DIR}/CMakeWizardTest.cmake) + add_test(NAME CMakeWizardTest COMMAND cmake -i) + set_property(TEST CMakeWizardTest PROPERTY PASS_REGULAR_EXPRESSION + "The \"cmake -i\" wizard mode is no longer supported.") + # If the cache variable CMAKE_CONTRACT_PROJECTS is set # then the dashboard will run a contract with CMake test of that # name. For example CMAKE_CONTRACT_PROJECTS = vtk542 would run |