diff options
Diffstat (limited to 'Utilities/cmcurl/lib/http_proxy.c')
| -rw-r--r-- | Utilities/cmcurl/lib/http_proxy.c | 685 |
1 files changed, 685 insertions, 0 deletions
diff --git a/Utilities/cmcurl/lib/http_proxy.c b/Utilities/cmcurl/lib/http_proxy.c new file mode 100644 index 0000000..2e0d92e --- /dev/null +++ b/Utilities/cmcurl/lib/http_proxy.c @@ -0,0 +1,685 @@ +/*************************************************************************** + * _ _ ____ _ + * Project ___| | | | _ \| | + * / __| | | | |_) | | + * | (__| |_| | _ <| |___ + * \___|\___/|_| \_\_____| + * + * Copyright (C) 1998 - 2018, Daniel Stenberg, <daniel@haxx.se>, et al. + * + * This software is licensed as described in the file COPYING, which + * you should have received as part of this distribution. The terms + * are also available at https://curl.haxx.se/docs/copyright.html. + * + * You may opt to use, copy, modify, merge, publish, distribute and/or sell + * copies of the Software, and permit persons to whom the Software is + * furnished to do so, under the terms of the COPYING file. + * + * This software is distributed on an "AS IS" basis, WITHOUT WARRANTY OF ANY + * KIND, either express or implied. + * + ***************************************************************************/ + +#include "curl_setup.h" + +#include "http_proxy.h" + +#if !defined(CURL_DISABLE_PROXY) && !defined(CURL_DISABLE_HTTP) + +#include <curl/curl.h> +#include "sendf.h" +#include "http.h" +#include "url.h" +#include "select.h" +#include "progress.h" +#include "non-ascii.h" +#include "connect.h" +#include "curlx.h" +#include "vtls/vtls.h" + +/* The last 3 #include files should be in this order */ +#include "curl_printf.h" +#include "curl_memory.h" +#include "memdebug.h" + +/* + * Perform SSL initialization for HTTPS proxy. Sets + * proxy_ssl_connected connection bit when complete. Can be + * called multiple times. + */ +static CURLcode https_proxy_connect(struct connectdata *conn, int sockindex) +{ +#ifdef USE_SSL + CURLcode result = CURLE_OK; + DEBUGASSERT(conn->http_proxy.proxytype == CURLPROXY_HTTPS); + if(!conn->bits.proxy_ssl_connected[sockindex]) { + /* perform SSL initialization for this socket */ + result = + Curl_ssl_connect_nonblocking(conn, sockindex, + &conn->bits.proxy_ssl_connected[sockindex]); + if(result) + conn->bits.close = TRUE; /* a failed connection is marked for closure to + prevent (bad) re-use or similar */ + } + return result; +#else + (void) conn; + (void) sockindex; + return CURLE_NOT_BUILT_IN; +#endif +} + +CURLcode Curl_proxy_connect(struct connectdata *conn, int sockindex) +{ + if(conn->http_proxy.proxytype == CURLPROXY_HTTPS) { + const CURLcode result = https_proxy_connect(conn, sockindex); + if(result) + return result; + if(!conn->bits.proxy_ssl_connected[sockindex]) + return result; /* wait for HTTPS proxy SSL initialization to complete */ + } + + if(conn->bits.tunnel_proxy && conn->bits.httpproxy) { +#ifndef CURL_DISABLE_PROXY + /* for [protocol] tunneled through HTTP proxy */ + struct HTTP http_proxy; + void *prot_save; + const char *hostname; + int remote_port; + CURLcode result; + + /* BLOCKING */ + /* We want "seamless" operations through HTTP proxy tunnel */ + + /* Curl_proxyCONNECT is based on a pointer to a struct HTTP at the + * member conn->proto.http; we want [protocol] through HTTP and we have + * to change the member temporarily for connecting to the HTTP + * proxy. After Curl_proxyCONNECT we have to set back the member to the + * original pointer + * + * This function might be called several times in the multi interface case + * if the proxy's CONNECT response is not instant. + */ + prot_save = conn->data->req.protop; + memset(&http_proxy, 0, sizeof(http_proxy)); + conn->data->req.protop = &http_proxy; + connkeep(conn, "HTTP proxy CONNECT"); + + /* for the secondary socket (FTP), use the "connect to host" + * but ignore the "connect to port" (use the secondary port) + */ + + if(conn->bits.conn_to_host) + hostname = conn->conn_to_host.name; + else if(sockindex == SECONDARYSOCKET) + hostname = conn->secondaryhostname; + else + hostname = conn->host.name; + + if(sockindex == SECONDARYSOCKET) + remote_port = conn->secondary_port; + else if(conn->bits.conn_to_port) + remote_port = conn->conn_to_port; + else + remote_port = conn->remote_port; + result = Curl_proxyCONNECT(conn, sockindex, hostname, remote_port); + conn->data->req.protop = prot_save; + if(CURLE_OK != result) + return result; + Curl_safefree(conn->allocptr.proxyuserpwd); +#else + return CURLE_NOT_BUILT_IN; +#endif + } + /* no HTTP tunnel proxy, just return */ + return CURLE_OK; +} + +bool Curl_connect_complete(struct connectdata *conn) +{ + return !conn->connect_state || + (conn->connect_state->tunnel_state == TUNNEL_COMPLETE); +} + +bool Curl_connect_ongoing(struct connectdata *conn) +{ + return conn->connect_state && + (conn->connect_state->tunnel_state != TUNNEL_COMPLETE); +} + +static CURLcode connect_init(struct connectdata *conn, bool reinit) +{ + struct http_connect_state *s; + if(!reinit) { + DEBUGASSERT(!conn->connect_state); + s = calloc(1, sizeof(struct http_connect_state)); + if(!s) + return CURLE_OUT_OF_MEMORY; + infof(conn->data, "allocate connect buffer!\n"); + conn->connect_state = s; + } + else { + DEBUGASSERT(conn->connect_state); + s = conn->connect_state; + } + s->tunnel_state = TUNNEL_INIT; + s->keepon = TRUE; + s->line_start = s->connect_buffer; + s->ptr = s->line_start; + s->cl = 0; + s->close_connection = FALSE; + return CURLE_OK; +} + +static void connect_done(struct connectdata *conn) +{ + struct http_connect_state *s = conn->connect_state; + s->tunnel_state = TUNNEL_COMPLETE; + infof(conn->data, "CONNECT phase completed!\n"); +} + +static CURLcode CONNECT(struct connectdata *conn, + int sockindex, + const char *hostname, + int remote_port) +{ + int subversion = 0; + struct Curl_easy *data = conn->data; + struct SingleRequest *k = &data->req; + CURLcode result; + curl_socket_t tunnelsocket = conn->sock[sockindex]; + struct http_connect_state *s = conn->connect_state; + +#define SELECT_OK 0 +#define SELECT_ERROR 1 + + if(Curl_connect_complete(conn)) + return CURLE_OK; /* CONNECT is already completed */ + + conn->bits.proxy_connect_closed = FALSE; + + do { + timediff_t check; + if(TUNNEL_INIT == s->tunnel_state) { + /* BEGIN CONNECT PHASE */ + char *host_port; + Curl_send_buffer *req_buffer; + + infof(data, "Establish HTTP proxy tunnel to %s:%d\n", + hostname, remote_port); + + /* This only happens if we've looped here due to authentication + reasons, and we don't really use the newly cloned URL here + then. Just free() it. */ + free(data->req.newurl); + data->req.newurl = NULL; + + /* initialize a dynamic send-buffer */ + req_buffer = Curl_add_buffer_init(); + + if(!req_buffer) + return CURLE_OUT_OF_MEMORY; + + host_port = aprintf("%s:%d", hostname, remote_port); + if(!host_port) { + Curl_add_buffer_free(&req_buffer); + return CURLE_OUT_OF_MEMORY; + } + + /* Setup the proxy-authorization header, if any */ + result = Curl_http_output_auth(conn, "CONNECT", host_port, TRUE); + + free(host_port); + + if(!result) { + char *host = NULL; + const char *proxyconn = ""; + const char *useragent = ""; + const char *http = (conn->http_proxy.proxytype == CURLPROXY_HTTP_1_0) ? + "1.0" : "1.1"; + bool ipv6_ip = conn->bits.ipv6_ip; + char *hostheader; + + /* the hostname may be different */ + if(hostname != conn->host.name) + ipv6_ip = (strchr(hostname, ':') != NULL); + hostheader = /* host:port with IPv6 support */ + aprintf("%s%s%s:%d", ipv6_ip?"[":"", hostname, ipv6_ip?"]":"", + remote_port); + if(!hostheader) { + Curl_add_buffer_free(&req_buffer); + return CURLE_OUT_OF_MEMORY; + } + + if(!Curl_checkProxyheaders(conn, "Host")) { + host = aprintf("Host: %s\r\n", hostheader); + if(!host) { + free(hostheader); + Curl_add_buffer_free(&req_buffer); + return CURLE_OUT_OF_MEMORY; + } + } + if(!Curl_checkProxyheaders(conn, "Proxy-Connection")) + proxyconn = "Proxy-Connection: Keep-Alive\r\n"; + + if(!Curl_checkProxyheaders(conn, "User-Agent") && + data->set.str[STRING_USERAGENT]) + useragent = conn->allocptr.uagent; + + result = + Curl_add_bufferf(&req_buffer, + "CONNECT %s HTTP/%s\r\n" + "%s" /* Host: */ + "%s" /* Proxy-Authorization */ + "%s" /* User-Agent */ + "%s", /* Proxy-Connection */ + hostheader, + http, + host?host:"", + conn->allocptr.proxyuserpwd? + conn->allocptr.proxyuserpwd:"", + useragent, + proxyconn); + + if(host) + free(host); + free(hostheader); + + if(!result) + result = Curl_add_custom_headers(conn, TRUE, req_buffer); + + if(!result) + /* CRLF terminate the request */ + result = Curl_add_bufferf(&req_buffer, "\r\n"); + + if(!result) { + /* Send the connect request to the proxy */ + /* BLOCKING */ + result = + Curl_add_buffer_send(&req_buffer, conn, + &data->info.request_size, 0, sockindex); + } + req_buffer = NULL; + if(result) + failf(data, "Failed sending CONNECT to proxy"); + } + + Curl_add_buffer_free(&req_buffer); + if(result) + return result; + + s->tunnel_state = TUNNEL_CONNECT; + s->perline = 0; + } /* END CONNECT PHASE */ + + check = Curl_timeleft(data, NULL, TRUE); + if(check <= 0) { + failf(data, "Proxy CONNECT aborted due to timeout"); + return CURLE_OPERATION_TIMEDOUT; + } + + if(!Curl_conn_data_pending(conn, sockindex)) + /* return so we'll be called again polling-style */ + return CURLE_OK; + + /* at this point, the tunnel_connecting phase is over. */ + + { /* READING RESPONSE PHASE */ + int error = SELECT_OK; + + while(s->keepon && !error) { + ssize_t gotbytes; + + /* make sure we have space to read more data */ + if(s->ptr >= &s->connect_buffer[CONNECT_BUFFER_SIZE]) { + failf(data, "CONNECT response too large!"); + return CURLE_RECV_ERROR; + } + + /* Read one byte at a time to avoid a race condition. Wait at most one + second before looping to ensure continuous pgrsUpdates. */ + result = Curl_read(conn, tunnelsocket, s->ptr, 1, &gotbytes); + if(result == CURLE_AGAIN) + /* socket buffer drained, return */ + return CURLE_OK; + + if(Curl_pgrsUpdate(conn)) + return CURLE_ABORTED_BY_CALLBACK; + + if(result) { + s->keepon = FALSE; + break; + } + else if(gotbytes <= 0) { + if(data->set.proxyauth && data->state.authproxy.avail) { + /* proxy auth was requested and there was proxy auth available, + then deem this as "mere" proxy disconnect */ + conn->bits.proxy_connect_closed = TRUE; + infof(data, "Proxy CONNECT connection closed\n"); + } + else { + error = SELECT_ERROR; + failf(data, "Proxy CONNECT aborted"); + } + s->keepon = FALSE; + break; + } + + + if(s->keepon > TRUE) { + /* This means we are currently ignoring a response-body */ + + s->ptr = s->connect_buffer; + if(s->cl) { + /* A Content-Length based body: simply count down the counter + and make sure to break out of the loop when we're done! */ + s->cl--; + if(s->cl <= 0) { + s->keepon = FALSE; + s->tunnel_state = TUNNEL_COMPLETE; + break; + } + } + else { + /* chunked-encoded body, so we need to do the chunked dance + properly to know when the end of the body is reached */ + CHUNKcode r; + ssize_t tookcareof = 0; + + /* now parse the chunked piece of data so that we can + properly tell when the stream ends */ + r = Curl_httpchunk_read(conn, s->ptr, 1, &tookcareof); + if(r == CHUNKE_STOP) { + /* we're done reading chunks! */ + infof(data, "chunk reading DONE\n"); + s->keepon = FALSE; + /* we did the full CONNECT treatment, go COMPLETE */ + s->tunnel_state = TUNNEL_COMPLETE; + } + } + continue; + } + + s->perline++; /* amount of bytes in this line so far */ + + /* if this is not the end of a header line then continue */ + if(*s->ptr != 0x0a) { + s->ptr++; + continue; + } + + /* convert from the network encoding */ + result = Curl_convert_from_network(data, s->line_start, + (size_t)s->perline); + /* Curl_convert_from_network calls failf if unsuccessful */ + if(result) + return result; + + /* output debug if that is requested */ + if(data->set.verbose) + Curl_debug(data, CURLINFO_HEADER_IN, + s->line_start, (size_t)s->perline); + + if(!data->set.suppress_connect_headers) { + /* send the header to the callback */ + int writetype = CLIENTWRITE_HEADER; + if(data->set.include_header) + writetype |= CLIENTWRITE_BODY; + + result = Curl_client_write(conn, writetype, + s->line_start, s->perline); + if(result) + return result; + } + + data->info.header_size += (long)s->perline; + data->req.headerbytecount += (long)s->perline; + + /* Newlines are CRLF, so the CR is ignored as the line isn't + really terminated until the LF comes. Treat a following CR + as end-of-headers as well.*/ + + if(('\r' == s->line_start[0]) || + ('\n' == s->line_start[0])) { + /* end of response-headers from the proxy */ + s->ptr = s->connect_buffer; + if((407 == k->httpcode) && !data->state.authproblem) { + /* If we get a 407 response code with content length + when we have no auth problem, we must ignore the + whole response-body */ + s->keepon = 2; + + if(s->cl) { + infof(data, "Ignore %" CURL_FORMAT_CURL_OFF_T + " bytes of response-body\n", s->cl); + } + else if(s->chunked_encoding) { + CHUNKcode r; + + infof(data, "Ignore chunked response-body\n"); + + /* We set ignorebody true here since the chunked + decoder function will acknowledge that. Pay + attention so that this is cleared again when this + function returns! */ + k->ignorebody = TRUE; + + if(s->line_start[1] == '\n') { + /* this can only be a LF if the letter at index 0 + was a CR */ + s->line_start++; + } + + /* now parse the chunked piece of data so that we can + properly tell when the stream ends */ + r = Curl_httpchunk_read(conn, s->line_start + 1, 1, &gotbytes); + if(r == CHUNKE_STOP) { + /* we're done reading chunks! */ + infof(data, "chunk reading DONE\n"); + s->keepon = FALSE; + /* we did the full CONNECT treatment, go to COMPLETE */ + s->tunnel_state = TUNNEL_COMPLETE; + } + } + else { + /* without content-length or chunked encoding, we + can't keep the connection alive since the close is + the end signal so we bail out at once instead */ + s->keepon = FALSE; + } + } + else + s->keepon = FALSE; + if(!s->cl) + /* we did the full CONNECT treatment, go to COMPLETE */ + s->tunnel_state = TUNNEL_COMPLETE; + continue; + } + + s->line_start[s->perline] = 0; /* zero terminate the buffer */ + if((checkprefix("WWW-Authenticate:", s->line_start) && + (401 == k->httpcode)) || + (checkprefix("Proxy-authenticate:", s->line_start) && + (407 == k->httpcode))) { + + bool proxy = (k->httpcode == 407) ? TRUE : FALSE; + char *auth = Curl_copy_header_value(s->line_start); + if(!auth) + return CURLE_OUT_OF_MEMORY; + + result = Curl_http_input_auth(conn, proxy, auth); + + free(auth); + + if(result) + return result; + } + else if(checkprefix("Content-Length:", s->line_start)) { + if(k->httpcode/100 == 2) { + /* A client MUST ignore any Content-Length or Transfer-Encoding + header fields received in a successful response to CONNECT. + "Successful" described as: 2xx (Successful). RFC 7231 4.3.6 */ + infof(data, "Ignoring Content-Length in CONNECT %03d response\n", + k->httpcode); + } + else { + (void)curlx_strtoofft(s->line_start + + strlen("Content-Length:"), NULL, 10, &s->cl); + } + } + else if(Curl_compareheader(s->line_start, "Connection:", "close")) + s->close_connection = TRUE; + else if(checkprefix("Transfer-Encoding:", s->line_start)) { + if(k->httpcode/100 == 2) { + /* A client MUST ignore any Content-Length or Transfer-Encoding + header fields received in a successful response to CONNECT. + "Successful" described as: 2xx (Successful). RFC 7231 4.3.6 */ + infof(data, "Ignoring Transfer-Encoding in " + "CONNECT %03d response\n", k->httpcode); + } + else if(Curl_compareheader(s->line_start, + "Transfer-Encoding:", "chunked")) { + infof(data, "CONNECT responded chunked\n"); + s->chunked_encoding = TRUE; + /* init our chunky engine */ + Curl_httpchunk_init(conn); + } + } + else if(Curl_compareheader(s->line_start, + "Proxy-Connection:", "close")) + s->close_connection = TRUE; + else if(2 == sscanf(s->line_start, "HTTP/1.%d %d", + &subversion, + &k->httpcode)) { + /* store the HTTP code from the proxy */ + data->info.httpproxycode = k->httpcode; + } + + s->perline = 0; /* line starts over here */ + s->ptr = s->connect_buffer; + s->line_start = s->ptr; + } /* while there's buffer left and loop is requested */ + + if(Curl_pgrsUpdate(conn)) + return CURLE_ABORTED_BY_CALLBACK; + + if(error) + return CURLE_RECV_ERROR; + + if(data->info.httpproxycode/100 != 2) { + /* Deal with the possibly already received authenticate + headers. 'newurl' is set to a new URL if we must loop. */ + result = Curl_http_auth_act(conn); + if(result) + return result; + + if(conn->bits.close) + /* the connection has been marked for closure, most likely in the + Curl_http_auth_act() function and thus we can kill it at once + below */ + s->close_connection = TRUE; + } + + if(s->close_connection && data->req.newurl) { + /* Connection closed by server. Don't use it anymore */ + Curl_closesocket(conn, conn->sock[sockindex]); + conn->sock[sockindex] = CURL_SOCKET_BAD; + break; + } + } /* END READING RESPONSE PHASE */ + + /* If we are supposed to continue and request a new URL, which basically + * means the HTTP authentication is still going on so if the tunnel + * is complete we start over in INIT state */ + if(data->req.newurl && (TUNNEL_COMPLETE == s->tunnel_state)) { + connect_init(conn, TRUE); /* reinit */ + } + + } while(data->req.newurl); + + if(data->info.httpproxycode/100 != 2) { + if(s->close_connection && data->req.newurl) { + conn->bits.proxy_connect_closed = TRUE; + infof(data, "Connect me again please\n"); + connect_done(conn); + } + else { + free(data->req.newurl); + data->req.newurl = NULL; + /* failure, close this connection to avoid re-use */ + streamclose(conn, "proxy CONNECT failure"); + Curl_closesocket(conn, conn->sock[sockindex]); + conn->sock[sockindex] = CURL_SOCKET_BAD; + } + + /* to back to init state */ + s->tunnel_state = TUNNEL_INIT; + + if(conn->bits.proxy_connect_closed) + /* this is not an error, just part of the connection negotiation */ + return CURLE_OK; + failf(data, "Received HTTP code %d from proxy after CONNECT", + data->req.httpcode); + return CURLE_RECV_ERROR; + } + + s->tunnel_state = TUNNEL_COMPLETE; + + /* If a proxy-authorization header was used for the proxy, then we should + make sure that it isn't accidentally used for the document request + after we've connected. So let's free and clear it here. */ + Curl_safefree(conn->allocptr.proxyuserpwd); + conn->allocptr.proxyuserpwd = NULL; + + data->state.authproxy.done = TRUE; + + infof(data, "Proxy replied %d to CONNECT request\n", + data->info.httpproxycode); + data->req.ignorebody = FALSE; /* put it (back) to non-ignore state */ + conn->bits.rewindaftersend = FALSE; /* make sure this isn't set for the + document request */ + return CURLE_OK; +} + +void Curl_connect_free(struct Curl_easy *data) +{ + struct connectdata *conn = data->easy_conn; + struct http_connect_state *s = conn->connect_state; + if(s) { + free(s); + conn->connect_state = NULL; + } +} + +/* + * Curl_proxyCONNECT() requires that we're connected to a HTTP proxy. This + * function will issue the necessary commands to get a seamless tunnel through + * this proxy. After that, the socket can be used just as a normal socket. + */ + +CURLcode Curl_proxyCONNECT(struct connectdata *conn, + int sockindex, + const char *hostname, + int remote_port) +{ + CURLcode result; + if(!conn->connect_state) { + result = connect_init(conn, FALSE); + if(result) + return result; + } + result = CONNECT(conn, sockindex, hostname, remote_port); + + if(result || Curl_connect_complete(conn)) + connect_done(conn); + + return result; +} + +#else +void Curl_connect_free(struct Curl_easy *data) +{ + (void)data; +} + +#endif /* CURL_DISABLE_PROXY */ |