diff options
Diffstat (limited to 'Utilities/cmcurl/lib/imap.c')
| -rw-r--r-- | Utilities/cmcurl/lib/imap.c | 2115 |
1 files changed, 2115 insertions, 0 deletions
diff --git a/Utilities/cmcurl/lib/imap.c b/Utilities/cmcurl/lib/imap.c new file mode 100644 index 0000000..3ef8909 --- /dev/null +++ b/Utilities/cmcurl/lib/imap.c @@ -0,0 +1,2115 @@ +/*************************************************************************** + * _ _ ____ _ + * Project ___| | | | _ \| | + * / __| | | | |_) | | + * | (__| |_| | _ <| |___ + * \___|\___/|_| \_\_____| + * + * Copyright (C) 1998 - 2018, Daniel Stenberg, <daniel@haxx.se>, et al. + * + * This software is licensed as described in the file COPYING, which + * you should have received as part of this distribution. The terms + * are also available at https://curl.haxx.se/docs/copyright.html. + * + * You may opt to use, copy, modify, merge, publish, distribute and/or sell + * copies of the Software, and permit persons to whom the Software is + * furnished to do so, under the terms of the COPYING file. + * + * This software is distributed on an "AS IS" basis, WITHOUT WARRANTY OF ANY + * KIND, either express or implied. + * + * RFC2195 CRAM-MD5 authentication + * RFC2595 Using TLS with IMAP, POP3 and ACAP + * RFC2831 DIGEST-MD5 authentication + * RFC3501 IMAPv4 protocol + * RFC4422 Simple Authentication and Security Layer (SASL) + * RFC4616 PLAIN authentication + * RFC4752 The Kerberos V5 ("GSSAPI") SASL Mechanism + * RFC4959 IMAP Extension for SASL Initial Client Response + * RFC5092 IMAP URL Scheme + * RFC6749 OAuth 2.0 Authorization Framework + * Draft LOGIN SASL Mechanism <draft-murchison-sasl-login-00.txt> + * + ***************************************************************************/ + +#include "curl_setup.h" + +#ifndef CURL_DISABLE_IMAP + +#ifdef HAVE_NETINET_IN_H +#include <netinet/in.h> +#endif +#ifdef HAVE_ARPA_INET_H +#include <arpa/inet.h> +#endif +#ifdef HAVE_UTSNAME_H +#include <sys/utsname.h> +#endif +#ifdef HAVE_NETDB_H +#include <netdb.h> +#endif +#ifdef __VMS +#include <in.h> +#include <inet.h> +#endif + +#if (defined(NETWARE) && defined(__NOVELL_LIBC__)) +#undef in_addr_t +#define in_addr_t unsigned long +#endif + +#include <curl/curl.h> +#include "urldata.h" +#include "sendf.h" +#include "hostip.h" +#include "progress.h" +#include "transfer.h" +#include "escape.h" +#include "http.h" /* for HTTP proxy tunnel stuff */ +#include "socks.h" +#include "imap.h" +#include "mime.h" +#include "strtoofft.h" +#include "strcase.h" +#include "vtls/vtls.h" +#include "connect.h" +#include "strerror.h" +#include "select.h" +#include "multiif.h" +#include "url.h" +#include "strcase.h" +#include "curl_sasl.h" +#include "warnless.h" + +/* The last 3 #include files should be in this order */ +#include "curl_printf.h" +#include "curl_memory.h" +#include "memdebug.h" + +/* Local API functions */ +static CURLcode imap_regular_transfer(struct connectdata *conn, bool *done); +static CURLcode imap_do(struct connectdata *conn, bool *done); +static CURLcode imap_done(struct connectdata *conn, CURLcode status, + bool premature); +static CURLcode imap_connect(struct connectdata *conn, bool *done); +static CURLcode imap_disconnect(struct connectdata *conn, bool dead); +static CURLcode imap_multi_statemach(struct connectdata *conn, bool *done); +static int imap_getsock(struct connectdata *conn, curl_socket_t *socks, + int numsocks); +static CURLcode imap_doing(struct connectdata *conn, bool *dophase_done); +static CURLcode imap_setup_connection(struct connectdata *conn); +static char *imap_atom(const char *str, bool escape_only); +static CURLcode imap_sendf(struct connectdata *conn, const char *fmt, ...); +static CURLcode imap_parse_url_options(struct connectdata *conn); +static CURLcode imap_parse_url_path(struct connectdata *conn); +static CURLcode imap_parse_custom_request(struct connectdata *conn); +static CURLcode imap_perform_authenticate(struct connectdata *conn, + const char *mech, + const char *initresp); +static CURLcode imap_continue_authenticate(struct connectdata *conn, + const char *resp); +static void imap_get_message(char *buffer, char **outptr); + +/* + * IMAP protocol handler. + */ + +const struct Curl_handler Curl_handler_imap = { + "IMAP", /* scheme */ + imap_setup_connection, /* setup_connection */ + imap_do, /* do_it */ + imap_done, /* done */ + ZERO_NULL, /* do_more */ + imap_connect, /* connect_it */ + imap_multi_statemach, /* connecting */ + imap_doing, /* doing */ + imap_getsock, /* proto_getsock */ + imap_getsock, /* doing_getsock */ + ZERO_NULL, /* domore_getsock */ + ZERO_NULL, /* perform_getsock */ + imap_disconnect, /* disconnect */ + ZERO_NULL, /* readwrite */ + ZERO_NULL, /* connection_check */ + PORT_IMAP, /* defport */ + CURLPROTO_IMAP, /* protocol */ + PROTOPT_CLOSEACTION| /* flags */ + PROTOPT_URLOPTIONS +}; + +#ifdef USE_SSL +/* + * IMAPS protocol handler. + */ + +const struct Curl_handler Curl_handler_imaps = { + "IMAPS", /* scheme */ + imap_setup_connection, /* setup_connection */ + imap_do, /* do_it */ + imap_done, /* done */ + ZERO_NULL, /* do_more */ + imap_connect, /* connect_it */ + imap_multi_statemach, /* connecting */ + imap_doing, /* doing */ + imap_getsock, /* proto_getsock */ + imap_getsock, /* doing_getsock */ + ZERO_NULL, /* domore_getsock */ + ZERO_NULL, /* perform_getsock */ + imap_disconnect, /* disconnect */ + ZERO_NULL, /* readwrite */ + ZERO_NULL, /* connection_check */ + PORT_IMAPS, /* defport */ + CURLPROTO_IMAPS, /* protocol */ + PROTOPT_CLOSEACTION | PROTOPT_SSL | /* flags */ + PROTOPT_URLOPTIONS +}; +#endif + +#define IMAP_RESP_OK 1 +#define IMAP_RESP_NOT_OK 2 +#define IMAP_RESP_PREAUTH 3 + +/* SASL parameters for the imap protocol */ +static const struct SASLproto saslimap = { + "imap", /* The service name */ + '+', /* Code received when continuation is expected */ + IMAP_RESP_OK, /* Code to receive upon authentication success */ + 0, /* Maximum initial response length (no max) */ + imap_perform_authenticate, /* Send authentication command */ + imap_continue_authenticate, /* Send authentication continuation */ + imap_get_message /* Get SASL response message */ +}; + + +#ifdef USE_SSL +static void imap_to_imaps(struct connectdata *conn) +{ + /* Change the connection handler */ + conn->handler = &Curl_handler_imaps; + + /* Set the connection's upgraded to TLS flag */ + conn->tls_upgraded = TRUE; +} +#else +#define imap_to_imaps(x) Curl_nop_stmt +#endif + +/*********************************************************************** + * + * imap_matchresp() + * + * Determines whether the untagged response is related to the specified + * command by checking if it is in format "* <command-name> ..." or + * "* <number> <command-name> ...". + * + * The "* " marker is assumed to have already been checked by the caller. + */ +static bool imap_matchresp(const char *line, size_t len, const char *cmd) +{ + const char *end = line + len; + size_t cmd_len = strlen(cmd); + + /* Skip the untagged response marker */ + line += 2; + + /* Do we have a number after the marker? */ + if(line < end && ISDIGIT(*line)) { + /* Skip the number */ + do + line++; + while(line < end && ISDIGIT(*line)); + + /* Do we have the space character? */ + if(line == end || *line != ' ') + return FALSE; + + line++; + } + + /* Does the command name match and is it followed by a space character or at + the end of line? */ + if(line + cmd_len <= end && strncasecompare(line, cmd, cmd_len) && + (line[cmd_len] == ' ' || line + cmd_len + 2 == end)) + return TRUE; + + return FALSE; +} + +/*********************************************************************** + * + * imap_endofresp() + * + * Checks whether the given string is a valid tagged, untagged or continuation + * response which can be processed by the response handler. + */ +static bool imap_endofresp(struct connectdata *conn, char *line, size_t len, + int *resp) +{ + struct IMAP *imap = conn->data->req.protop; + struct imap_conn *imapc = &conn->proto.imapc; + const char *id = imapc->resptag; + size_t id_len = strlen(id); + + /* Do we have a tagged command response? */ + if(len >= id_len + 1 && !memcmp(id, line, id_len) && line[id_len] == ' ') { + line += id_len + 1; + len -= id_len + 1; + + if(len >= 2 && !memcmp(line, "OK", 2)) + *resp = IMAP_RESP_OK; + else if(len >= 7 && !memcmp(line, "PREAUTH", 7)) + *resp = IMAP_RESP_PREAUTH; + else + *resp = IMAP_RESP_NOT_OK; + + return TRUE; + } + + /* Do we have an untagged command response? */ + if(len >= 2 && !memcmp("* ", line, 2)) { + switch(imapc->state) { + /* States which are interested in untagged responses */ + case IMAP_CAPABILITY: + if(!imap_matchresp(line, len, "CAPABILITY")) + return FALSE; + break; + + case IMAP_LIST: + if((!imap->custom && !imap_matchresp(line, len, "LIST")) || + (imap->custom && !imap_matchresp(line, len, imap->custom) && + (!strcasecompare(imap->custom, "STORE") || + !imap_matchresp(line, len, "FETCH")) && + !strcasecompare(imap->custom, "SELECT") && + !strcasecompare(imap->custom, "EXAMINE") && + !strcasecompare(imap->custom, "SEARCH") && + !strcasecompare(imap->custom, "EXPUNGE") && + !strcasecompare(imap->custom, "LSUB") && + !strcasecompare(imap->custom, "UID") && + !strcasecompare(imap->custom, "NOOP"))) + return FALSE; + break; + + case IMAP_SELECT: + /* SELECT is special in that its untagged responses do not have a + common prefix so accept anything! */ + break; + + case IMAP_FETCH: + if(!imap_matchresp(line, len, "FETCH")) + return FALSE; + break; + + case IMAP_SEARCH: + if(!imap_matchresp(line, len, "SEARCH")) + return FALSE; + break; + + /* Ignore other untagged responses */ + default: + return FALSE; + } + + *resp = '*'; + return TRUE; + } + + /* Do we have a continuation response? This should be a + symbol followed by + a space and optionally some text as per RFC-3501 for the AUTHENTICATE and + APPEND commands and as outlined in Section 4. Examples of RFC-4959 but + some e-mail servers ignore this and only send a single + instead. */ + if(imap && !imap->custom && ((len == 3 && !memcmp("+", line, 1)) || + (len >= 2 && !memcmp("+ ", line, 2)))) { + switch(imapc->state) { + /* States which are interested in continuation responses */ + case IMAP_AUTHENTICATE: + case IMAP_APPEND: + *resp = '+'; + break; + + default: + failf(conn->data, "Unexpected continuation response"); + *resp = -1; + break; + } + + return TRUE; + } + + return FALSE; /* Nothing for us */ +} + +/*********************************************************************** + * + * imap_get_message() + * + * Gets the authentication message from the response buffer. + */ +static void imap_get_message(char *buffer, char **outptr) +{ + size_t len = strlen(buffer); + char *message = NULL; + + if(len > 2) { + /* Find the start of the message */ + len -= 2; + for(message = buffer + 2; *message == ' ' || *message == '\t'; + message++, len--) + ; + + /* Find the end of the message */ + for(; len--;) + if(message[len] != '\r' && message[len] != '\n' && message[len] != ' ' && + message[len] != '\t') + break; + + /* Terminate the message */ + if(++len) { + message[len] = '\0'; + } + } + else + /* junk input => zero length output */ + message = &buffer[len]; + + *outptr = message; +} + +/*********************************************************************** + * + * state() + * + * This is the ONLY way to change IMAP state! + */ +static void state(struct connectdata *conn, imapstate newstate) +{ + struct imap_conn *imapc = &conn->proto.imapc; +#if defined(DEBUGBUILD) && !defined(CURL_DISABLE_VERBOSE_STRINGS) + /* for debug purposes */ + static const char * const names[]={ + "STOP", + "SERVERGREET", + "CAPABILITY", + "STARTTLS", + "UPGRADETLS", + "AUTHENTICATE", + "LOGIN", + "LIST", + "SELECT", + "FETCH", + "FETCH_FINAL", + "APPEND", + "APPEND_FINAL", + "SEARCH", + "LOGOUT", + /* LAST */ + }; + + if(imapc->state != newstate) + infof(conn->data, "IMAP %p state change from %s to %s\n", + (void *)imapc, names[imapc->state], names[newstate]); +#endif + + imapc->state = newstate; +} + +/*********************************************************************** + * + * imap_perform_capability() + * + * Sends the CAPABILITY command in order to obtain a list of server side + * supported capabilities. + */ +static CURLcode imap_perform_capability(struct connectdata *conn) +{ + CURLcode result = CURLE_OK; + struct imap_conn *imapc = &conn->proto.imapc; + imapc->sasl.authmechs = SASL_AUTH_NONE; /* No known auth. mechanisms yet */ + imapc->sasl.authused = SASL_AUTH_NONE; /* Clear the auth. mechanism used */ + imapc->tls_supported = FALSE; /* Clear the TLS capability */ + + /* Send the CAPABILITY command */ + result = imap_sendf(conn, "CAPABILITY"); + + if(!result) + state(conn, IMAP_CAPABILITY); + + return result; +} + +/*********************************************************************** + * + * imap_perform_starttls() + * + * Sends the STARTTLS command to start the upgrade to TLS. + */ +static CURLcode imap_perform_starttls(struct connectdata *conn) +{ + CURLcode result = CURLE_OK; + + /* Send the STARTTLS command */ + result = imap_sendf(conn, "STARTTLS"); + + if(!result) + state(conn, IMAP_STARTTLS); + + return result; +} + +/*********************************************************************** + * + * imap_perform_upgrade_tls() + * + * Performs the upgrade to TLS. + */ +static CURLcode imap_perform_upgrade_tls(struct connectdata *conn) +{ + CURLcode result = CURLE_OK; + struct imap_conn *imapc = &conn->proto.imapc; + + /* Start the SSL connection */ + result = Curl_ssl_connect_nonblocking(conn, FIRSTSOCKET, &imapc->ssldone); + + if(!result) { + if(imapc->state != IMAP_UPGRADETLS) + state(conn, IMAP_UPGRADETLS); + + if(imapc->ssldone) { + imap_to_imaps(conn); + result = imap_perform_capability(conn); + } + } + + return result; +} + +/*********************************************************************** + * + * imap_perform_login() + * + * Sends a clear text LOGIN command to authenticate with. + */ +static CURLcode imap_perform_login(struct connectdata *conn) +{ + CURLcode result = CURLE_OK; + char *user; + char *passwd; + + /* Check we have a username and password to authenticate with and end the + connect phase if we don't */ + if(!conn->bits.user_passwd) { + state(conn, IMAP_STOP); + + return result; + } + + /* Make sure the username and password are in the correct atom format */ + user = imap_atom(conn->user, false); + passwd = imap_atom(conn->passwd, false); + + /* Send the LOGIN command */ + result = imap_sendf(conn, "LOGIN %s %s", user ? user : "", + passwd ? passwd : ""); + + free(user); + free(passwd); + + if(!result) + state(conn, IMAP_LOGIN); + + return result; +} + +/*********************************************************************** + * + * imap_perform_authenticate() + * + * Sends an AUTHENTICATE command allowing the client to login with the given + * SASL authentication mechanism. + */ +static CURLcode imap_perform_authenticate(struct connectdata *conn, + const char *mech, + const char *initresp) +{ + CURLcode result = CURLE_OK; + + if(initresp) { + /* Send the AUTHENTICATE command with the initial response */ + result = imap_sendf(conn, "AUTHENTICATE %s %s", mech, initresp); + } + else { + /* Send the AUTHENTICATE command */ + result = imap_sendf(conn, "AUTHENTICATE %s", mech); + } + + return result; +} + +/*********************************************************************** + * + * imap_continue_authenticate() + * + * Sends SASL continuation data or cancellation. + */ +static CURLcode imap_continue_authenticate(struct connectdata *conn, + const char *resp) +{ + struct imap_conn *imapc = &conn->proto.imapc; + + return Curl_pp_sendf(&imapc->pp, "%s", resp); +} + +/*********************************************************************** + * + * imap_perform_authentication() + * + * Initiates the authentication sequence, with the appropriate SASL + * authentication mechanism, falling back to clear text should a common + * mechanism not be available between the client and server. + */ +static CURLcode imap_perform_authentication(struct connectdata *conn) +{ + CURLcode result = CURLE_OK; + struct imap_conn *imapc = &conn->proto.imapc; + saslprogress progress; + + /* Check if already authenticated OR if there is enough data to authenticate + with and end the connect phase if we don't */ + if(imapc->preauth || + !Curl_sasl_can_authenticate(&imapc->sasl, conn)) { + state(conn, IMAP_STOP); + return result; + } + + /* Calculate the SASL login details */ + result = Curl_sasl_start(&imapc->sasl, conn, imapc->ir_supported, &progress); + + if(!result) { + if(progress == SASL_INPROGRESS) + state(conn, IMAP_AUTHENTICATE); + else if(!imapc->login_disabled && (imapc->preftype & IMAP_TYPE_CLEARTEXT)) + /* Perform clear text authentication */ + result = imap_perform_login(conn); + else { + /* Other mechanisms not supported */ + infof(conn->data, "No known authentication mechanisms supported!\n"); + result = CURLE_LOGIN_DENIED; + } + } + + return result; +} + +/*********************************************************************** + * + * imap_perform_list() + * + * Sends a LIST command or an alternative custom request. + */ +static CURLcode imap_perform_list(struct connectdata *conn) +{ + CURLcode result = CURLE_OK; + struct Curl_easy *data = conn->data; + struct IMAP *imap = data->req.protop; + + if(imap->custom) + /* Send the custom request */ + result = imap_sendf(conn, "%s%s", imap->custom, + imap->custom_params ? imap->custom_params : ""); + else { + /* Make sure the mailbox is in the correct atom format if necessary */ + char *mailbox = imap->mailbox ? imap_atom(imap->mailbox, true) + : strdup(""); + if(!mailbox) + return CURLE_OUT_OF_MEMORY; + + /* Send the LIST command */ + result = imap_sendf(conn, "LIST \"%s\" *", mailbox); + + free(mailbox); + } + + if(!result) + state(conn, IMAP_LIST); + + return result; +} + +/*********************************************************************** + * + * imap_perform_select() + * + * Sends a SELECT command to ask the server to change the selected mailbox. + */ +static CURLcode imap_perform_select(struct connectdata *conn) +{ + CURLcode result = CURLE_OK; + struct Curl_easy *data = conn->data; + struct IMAP *imap = data->req.protop; + struct imap_conn *imapc = &conn->proto.imapc; + char *mailbox; + + /* Invalidate old information as we are switching mailboxes */ + Curl_safefree(imapc->mailbox); + Curl_safefree(imapc->mailbox_uidvalidity); + + /* Check we have a mailbox */ + if(!imap->mailbox) { + failf(conn->data, "Cannot SELECT without a mailbox."); + return CURLE_URL_MALFORMAT; + } + + /* Make sure the mailbox is in the correct atom format */ + mailbox = imap_atom(imap->mailbox, false); + if(!mailbox) + return CURLE_OUT_OF_MEMORY; + + /* Send the SELECT command */ + result = imap_sendf(conn, "SELECT %s", mailbox); + + free(mailbox); + + if(!result) + state(conn, IMAP_SELECT); + + return result; +} + +/*********************************************************************** + * + * imap_perform_fetch() + * + * Sends a FETCH command to initiate the download of a message. + */ +static CURLcode imap_perform_fetch(struct connectdata *conn) +{ + CURLcode result = CURLE_OK; + struct IMAP *imap = conn->data->req.protop; + /* Check we have a UID */ + if(imap->uid) { + + /* Send the FETCH command */ + if(imap->partial) + result = imap_sendf(conn, "UID FETCH %s BODY[%s]<%s>", + imap->uid, + imap->section ? imap->section : "", + imap->partial); + else + result = imap_sendf(conn, "UID FETCH %s BODY[%s]", + imap->uid, + imap->section ? imap->section : ""); + } + else if(imap->mindex) { + + /* Send the FETCH command */ + if(imap->partial) + result = imap_sendf(conn, "FETCH %s BODY[%s]<%s>", + imap->mindex, + imap->section ? imap->section : "", + imap->partial); + else + result = imap_sendf(conn, "FETCH %s BODY[%s]", + imap->mindex, + imap->section ? imap->section : ""); + } + else { + failf(conn->data, "Cannot FETCH without a UID."); + return CURLE_URL_MALFORMAT; + } + if(!result) + state(conn, IMAP_FETCH); + + return result; +} + +/*********************************************************************** + * + * imap_perform_append() + * + * Sends an APPEND command to initiate the upload of a message. + */ +static CURLcode imap_perform_append(struct connectdata *conn) +{ + CURLcode result = CURLE_OK; + struct Curl_easy *data = conn->data; + struct IMAP *imap = data->req.protop; + char *mailbox; + + /* Check we have a mailbox */ + if(!imap->mailbox) { + failf(data, "Cannot APPEND without a mailbox."); + return CURLE_URL_MALFORMAT; + } + + /* Prepare the mime data if some. */ + if(data->set.mimepost.kind != MIMEKIND_NONE) { + /* Use the whole structure as data. */ + data->set.mimepost.flags &= ~MIME_BODY_ONLY; + + /* Add external headers and mime version. */ + curl_mime_headers(&data->set.mimepost, data->set.headers, 0); + result = Curl_mime_prepare_headers(&data->set.mimepost, NULL, + NULL, MIMESTRATEGY_MAIL); + + if(!result) + if(!Curl_checkheaders(conn, "Mime-Version")) + result = Curl_mime_add_header(&data->set.mimepost.curlheaders, + "Mime-Version: 1.0"); + + /* Make sure we will read the entire mime structure. */ + if(!result) + result = Curl_mime_rewind(&data->set.mimepost); + + if(result) + return result; + + data->state.infilesize = Curl_mime_size(&data->set.mimepost); + + /* Read from mime structure. */ + data->state.fread_func = (curl_read_callback) Curl_mime_read; + data->state.in = (void *) &data->set.mimepost; + } + + /* Check we know the size of the upload */ + if(data->state.infilesize < 0) { + failf(data, "Cannot APPEND with unknown input file size\n"); + return CURLE_UPLOAD_FAILED; + } + + /* Make sure the mailbox is in the correct atom format */ + mailbox = imap_atom(imap->mailbox, false); + if(!mailbox) + return CURLE_OUT_OF_MEMORY; + + /* Send the APPEND command */ + result = imap_sendf(conn, "APPEND %s (\\Seen) {%" CURL_FORMAT_CURL_OFF_T "}", + mailbox, data->state.infilesize); + + free(mailbox); + + if(!result) + state(conn, IMAP_APPEND); + + return result; +} + +/*********************************************************************** + * + * imap_perform_search() + * + * Sends a SEARCH command. + */ +static CURLcode imap_perform_search(struct connectdata *conn) +{ + CURLcode result = CURLE_OK; + struct IMAP *imap = conn->data->req.protop; + + /* Check we have a query string */ + if(!imap->query) { + failf(conn->data, "Cannot SEARCH without a query string."); + return CURLE_URL_MALFORMAT; + } + + /* Send the SEARCH command */ + result = imap_sendf(conn, "SEARCH %s", imap->query); + + if(!result) + state(conn, IMAP_SEARCH); + + return result; +} + +/*********************************************************************** + * + * imap_perform_logout() + * + * Performs the logout action prior to sclose() being called. + */ +static CURLcode imap_perform_logout(struct connectdata *conn) +{ + CURLcode result = CURLE_OK; + + /* Send the LOGOUT command */ + result = imap_sendf(conn, "LOGOUT"); + + if(!result) + state(conn, IMAP_LOGOUT); + + return result; +} + +/* For the initial server greeting */ +static CURLcode imap_state_servergreet_resp(struct connectdata *conn, + int imapcode, + imapstate instate) +{ + struct Curl_easy *data = conn->data; + (void)instate; /* no use for this yet */ + + if(imapcode == IMAP_RESP_PREAUTH) { + /* PREAUTH */ + struct imap_conn *imapc = &conn->proto.imapc; + imapc->preauth = TRUE; + infof(data, "PREAUTH connection, already authenticated!\n"); + } + else if(imapcode != IMAP_RESP_OK) { + failf(data, "Got unexpected imap-server response"); + return CURLE_WEIRD_SERVER_REPLY; + } + + return imap_perform_capability(conn); +} + +/* For CAPABILITY responses */ +static CURLcode imap_state_capability_resp(struct connectdata *conn, + int imapcode, + imapstate instate) +{ + CURLcode result = CURLE_OK; + struct Curl_easy *data = conn->data; + struct imap_conn *imapc = &conn->proto.imapc; + const char *line = data->state.buffer; + + (void)instate; /* no use for this yet */ + + /* Do we have a untagged response? */ + if(imapcode == '*') { + line += 2; + + /* Loop through the data line */ + for(;;) { + size_t wordlen; + while(*line && + (*line == ' ' || *line == '\t' || + *line == '\r' || *line == '\n')) { + + line++; + } + + if(!*line) + break; + + /* Extract the word */ + for(wordlen = 0; line[wordlen] && line[wordlen] != ' ' && + line[wordlen] != '\t' && line[wordlen] != '\r' && + line[wordlen] != '\n';) + wordlen++; + + /* Does the server support the STARTTLS capability? */ + if(wordlen == 8 && !memcmp(line, "STARTTLS", 8)) + imapc->tls_supported = TRUE; + + /* Has the server explicitly disabled clear text authentication? */ + else if(wordlen == 13 && !memcmp(line, "LOGINDISABLED", 13)) + imapc->login_disabled = TRUE; + + /* Does the server support the SASL-IR capability? */ + else if(wordlen == 7 && !memcmp(line, "SASL-IR", 7)) + imapc->ir_supported = TRUE; + + /* Do we have a SASL based authentication mechanism? */ + else if(wordlen > 5 && !memcmp(line, "AUTH=", 5)) { + size_t llen; + unsigned int mechbit; + + line += 5; + wordlen -= 5; + + /* Test the word for a matching authentication mechanism */ + mechbit = Curl_sasl_decode_mech(line, wordlen, &llen); + if(mechbit && llen == wordlen) + imapc->sasl.authmechs |= mechbit; + } + + line += wordlen; + } + } + else if(imapcode == IMAP_RESP_OK) { + if(data->set.use_ssl && !conn->ssl[FIRSTSOCKET].use) { + /* We don't have a SSL/TLS connection yet, but SSL is requested */ + if(imapc->tls_supported) + /* Switch to TLS connection now */ + result = imap_perform_starttls(conn); + else if(data->set.use_ssl == CURLUSESSL_TRY) + /* Fallback and carry on with authentication */ + result = imap_perform_authentication(conn); + else { + failf(data, "STARTTLS not supported."); + result = CURLE_USE_SSL_FAILED; + } + } + else + result = imap_perform_authentication(conn); + } + else + result = imap_perform_authentication(conn); + + return result; +} + +/* For STARTTLS responses */ +static CURLcode imap_state_starttls_resp(struct connectdata *conn, + int imapcode, + imapstate instate) +{ + CURLcode result = CURLE_OK; + struct Curl_easy *data = conn->data; + + (void)instate; /* no use for this yet */ + + if(imapcode != IMAP_RESP_OK) { + if(data->set.use_ssl != CURLUSESSL_TRY) { + failf(data, "STARTTLS denied"); + result = CURLE_USE_SSL_FAILED; + } + else + result = imap_perform_authentication(conn); + } + else + result = imap_perform_upgrade_tls(conn); + + return result; +} + +/* For SASL authentication responses */ +static CURLcode imap_state_auth_resp(struct connectdata *conn, + int imapcode, + imapstate instate) +{ + CURLcode result = CURLE_OK; + struct Curl_easy *data = conn->data; + struct imap_conn *imapc = &conn->proto.imapc; + saslprogress progress; + + (void)instate; /* no use for this yet */ + + result = Curl_sasl_continue(&imapc->sasl, conn, imapcode, &progress); + if(!result) + switch(progress) { + case SASL_DONE: + state(conn, IMAP_STOP); /* Authenticated */ + break; + case SASL_IDLE: /* No mechanism left after cancellation */ + if((!imapc->login_disabled) && (imapc->preftype & IMAP_TYPE_CLEARTEXT)) + /* Perform clear text authentication */ + result = imap_perform_login(conn); + else { + failf(data, "Authentication cancelled"); + result = CURLE_LOGIN_DENIED; + } + break; + default: + break; + } + + return result; +} + +/* For LOGIN responses */ +static CURLcode imap_state_login_resp(struct connectdata *conn, + int imapcode, + imapstate instate) +{ + CURLcode result = CURLE_OK; + struct Curl_easy *data = conn->data; + + (void)instate; /* no use for this yet */ + + if(imapcode != IMAP_RESP_OK) { + failf(data, "Access denied. %c", imapcode); + result = CURLE_LOGIN_DENIED; + } + else + /* End of connect phase */ + state(conn, IMAP_STOP); + + return result; +} + +/* For LIST and SEARCH responses */ +static CURLcode imap_state_listsearch_resp(struct connectdata *conn, + int imapcode, + imapstate instate) +{ + CURLcode result = CURLE_OK; + char *line = conn->data->state.buffer; + size_t len = strlen(line); + + (void)instate; /* No use for this yet */ + + if(imapcode == '*') { + /* Temporarily add the LF character back and send as body to the client */ + line[len] = '\n'; + result = Curl_client_write(conn, CLIENTWRITE_BODY, line, len + 1); + line[len] = '\0'; + } + else if(imapcode != IMAP_RESP_OK) + result = CURLE_QUOTE_ERROR; /* TODO: Fix error code */ + else + /* End of DO phase */ + state(conn, IMAP_STOP); + + return result; +} + +/* For SELECT responses */ +static CURLcode imap_state_select_resp(struct connectdata *conn, int imapcode, + imapstate instate) +{ + CURLcode result = CURLE_OK; + struct Curl_easy *data = conn->data; + struct IMAP *imap = conn->data->req.protop; + struct imap_conn *imapc = &conn->proto.imapc; + const char *line = data->state.buffer; + + (void)instate; /* no use for this yet */ + + if(imapcode == '*') { + /* See if this is an UIDVALIDITY response */ + char tmp[20]; + if(sscanf(line + 2, "OK [UIDVALIDITY %19[0123456789]]", tmp) == 1) { + Curl_safefree(imapc->mailbox_uidvalidity); + imapc->mailbox_uidvalidity = strdup(tmp); + } + } + else if(imapcode == IMAP_RESP_OK) { + /* Check if the UIDVALIDITY has been specified and matches */ + if(imap->uidvalidity && imapc->mailbox_uidvalidity && + !strcasecompare(imap->uidvalidity, imapc->mailbox_uidvalidity)) { + failf(conn->data, "Mailbox UIDVALIDITY has changed"); + result = CURLE_REMOTE_FILE_NOT_FOUND; + } + else { + /* Note the currently opened mailbox on this connection */ + imapc->mailbox = strdup(imap->mailbox); + + if(imap->custom) + result = imap_perform_list(conn); + else if(imap->query) + result = imap_perform_search(conn); + else + result = imap_perform_fetch(conn); + } + } + else { + failf(data, "Select failed"); + result = CURLE_LOGIN_DENIED; + } + + return result; +} + +/* For the (first line of the) FETCH responses */ +static CURLcode imap_state_fetch_resp(struct connectdata *conn, int imapcode, + imapstate instate) +{ + CURLcode result = CURLE_OK; + struct Curl_easy *data = conn->data; + struct imap_conn *imapc = &conn->proto.imapc; + struct pingpong *pp = &imapc->pp; + const char *ptr = data->state.buffer; + bool parsed = FALSE; + curl_off_t size = 0; + + (void)instate; /* no use for this yet */ + + if(imapcode != '*') { + Curl_pgrsSetDownloadSize(data, -1); + state(conn, IMAP_STOP); + return CURLE_REMOTE_FILE_NOT_FOUND; /* TODO: Fix error code */ + } + + /* Something like this is received "* 1 FETCH (BODY[TEXT] {2021}\r" so parse + the continuation data contained within the curly brackets */ + while(*ptr && (*ptr != '{')) + ptr++; + + if(*ptr == '{') { + char *endptr; + if(!curlx_strtoofft(ptr + 1, &endptr, 10, &size)) { + if(endptr - ptr > 1 && endptr[0] == '}' && + endptr[1] == '\r' && endptr[2] == '\0') + parsed = TRUE; + } + } + + if(parsed) { + infof(data, "Found %" CURL_FORMAT_CURL_OFF_T " bytes to download\n", + size); + Curl_pgrsSetDownloadSize(data, size); + + if(pp->cache) { + /* At this point there is a bunch of data in the header "cache" that is + actually body content, send it as body and then skip it. Do note + that there may even be additional "headers" after the body. */ + size_t chunk = pp->cache_size; + + if(chunk > (size_t)size) + /* The conversion from curl_off_t to size_t is always fine here */ + chunk = (size_t)size; + + if(!chunk) { + /* no size, we're done with the data */ + state(conn, IMAP_STOP); + return CURLE_OK; + } + result = Curl_client_write(conn, CLIENTWRITE_BODY, pp->cache, chunk); + if(result) + return result; + + data->req.bytecount += chunk; + + infof(data, "Written %zu bytes, %" CURL_FORMAT_CURL_OFF_TU + " bytes are left for transfer\n", chunk, size - chunk); + + /* Have we used the entire cache or just part of it?*/ + if(pp->cache_size > chunk) { + /* Only part of it so shrink the cache to fit the trailing data */ + memmove(pp->cache, pp->cache + chunk, pp->cache_size - chunk); + pp->cache_size -= chunk; + } + else { + /* Free the cache */ + Curl_safefree(pp->cache); + + /* Reset the cache size */ + pp->cache_size = 0; + } + } + + if(data->req.bytecount == size) + /* The entire data is already transferred! */ + Curl_setup_transfer(conn, -1, -1, FALSE, NULL, -1, NULL); + else { + /* IMAP download */ + data->req.maxdownload = size; + Curl_setup_transfer(conn, FIRSTSOCKET, size, FALSE, NULL, -1, NULL); + } + } + else { + /* We don't know how to parse this line */ + failf(pp->conn->data, "Failed to parse FETCH response."); + result = CURLE_WEIRD_SERVER_REPLY; + } + + /* End of DO phase */ + state(conn, IMAP_STOP); + + return result; +} + +/* For final FETCH responses performed after the download */ +static CURLcode imap_state_fetch_final_resp(struct connectdata *conn, + int imapcode, + imapstate instate) +{ + CURLcode result = CURLE_OK; + + (void)instate; /* No use for this yet */ + + if(imapcode != IMAP_RESP_OK) + result = CURLE_WEIRD_SERVER_REPLY; + else + /* End of DONE phase */ + state(conn, IMAP_STOP); + + return result; +} + +/* For APPEND responses */ +static CURLcode imap_state_append_resp(struct connectdata *conn, int imapcode, + imapstate instate) +{ + CURLcode result = CURLE_OK; + struct Curl_easy *data = conn->data; + + (void)instate; /* No use for this yet */ + + if(imapcode != '+') { + result = CURLE_UPLOAD_FAILED; + } + else { + /* Set the progress upload size */ + Curl_pgrsSetUploadSize(data, data->state.infilesize); + + /* IMAP upload */ + Curl_setup_transfer(conn, -1, -1, FALSE, NULL, FIRSTSOCKET, NULL); + + /* End of DO phase */ + state(conn, IMAP_STOP); + } + + return result; +} + +/* For final APPEND responses performed after the upload */ +static CURLcode imap_state_append_final_resp(struct connectdata *conn, + int imapcode, + imapstate instate) +{ + CURLcode result = CURLE_OK; + + (void)instate; /* No use for this yet */ + + if(imapcode != IMAP_RESP_OK) + result = CURLE_UPLOAD_FAILED; + else + /* End of DONE phase */ + state(conn, IMAP_STOP); + + return result; +} + +static CURLcode imap_statemach_act(struct connectdata *conn) +{ + CURLcode result = CURLE_OK; + curl_socket_t sock = conn->sock[FIRSTSOCKET]; + int imapcode; + struct imap_conn *imapc = &conn->proto.imapc; + struct pingpong *pp = &imapc->pp; + size_t nread = 0; + + /* Busy upgrading the connection; right now all I/O is SSL/TLS, not IMAP */ + if(imapc->state == IMAP_UPGRADETLS) + return imap_perform_upgrade_tls(conn); + + /* Flush any data that needs to be sent */ + if(pp->sendleft) + return Curl_pp_flushsend(pp); + + do { + /* Read the response from the server */ + result = Curl_pp_readresp(sock, pp, &imapcode, &nread); + if(result) + return result; + + /* Was there an error parsing the response line? */ + if(imapcode == -1) + return CURLE_WEIRD_SERVER_REPLY; + + if(!imapcode) + break; + + /* We have now received a full IMAP server response */ + switch(imapc->state) { + case IMAP_SERVERGREET: + result = imap_state_servergreet_resp(conn, imapcode, imapc->state); + break; + + case IMAP_CAPABILITY: + result = imap_state_capability_resp(conn, imapcode, imapc->state); + break; + + case IMAP_STARTTLS: + result = imap_state_starttls_resp(conn, imapcode, imapc->state); + break; + + case IMAP_AUTHENTICATE: + result = imap_state_auth_resp(conn, imapcode, imapc->state); + break; + + case IMAP_LOGIN: + result = imap_state_login_resp(conn, imapcode, imapc->state); + break; + + case IMAP_LIST: + result = imap_state_listsearch_resp(conn, imapcode, imapc->state); + break; + + case IMAP_SELECT: + result = imap_state_select_resp(conn, imapcode, imapc->state); + break; + + case IMAP_FETCH: + result = imap_state_fetch_resp(conn, imapcode, imapc->state); + break; + + case IMAP_FETCH_FINAL: + result = imap_state_fetch_final_resp(conn, imapcode, imapc->state); + break; + + case IMAP_APPEND: + result = imap_state_append_resp(conn, imapcode, imapc->state); + break; + + case IMAP_APPEND_FINAL: + result = imap_state_append_final_resp(conn, imapcode, imapc->state); + break; + + case IMAP_SEARCH: + result = imap_state_listsearch_resp(conn, imapcode, imapc->state); + break; + + case IMAP_LOGOUT: + /* fallthrough, just stop! */ + default: + /* internal error */ + state(conn, IMAP_STOP); + break; + } + } while(!result && imapc->state != IMAP_STOP && Curl_pp_moredata(pp)); + + return result; +} + +/* Called repeatedly until done from multi.c */ +static CURLcode imap_multi_statemach(struct connectdata *conn, bool *done) +{ + CURLcode result = CURLE_OK; + struct imap_conn *imapc = &conn->proto.imapc; + + if((conn->handler->flags & PROTOPT_SSL) && !imapc->ssldone) { + result = Curl_ssl_connect_nonblocking(conn, FIRSTSOCKET, &imapc->ssldone); + if(result || !imapc->ssldone) + return result; + } + + result = Curl_pp_statemach(&imapc->pp, FALSE); + *done = (imapc->state == IMAP_STOP) ? TRUE : FALSE; + + return result; +} + +static CURLcode imap_block_statemach(struct connectdata *conn) +{ + CURLcode result = CURLE_OK; + struct imap_conn *imapc = &conn->proto.imapc; + + while(imapc->state != IMAP_STOP && !result) + result = Curl_pp_statemach(&imapc->pp, TRUE); + + return result; +} + +/* Allocate and initialize the struct IMAP for the current Curl_easy if + required */ +static CURLcode imap_init(struct connectdata *conn) +{ + CURLcode result = CURLE_OK; + struct Curl_easy *data = conn->data; + struct IMAP *imap; + + imap = data->req.protop = calloc(sizeof(struct IMAP), 1); + if(!imap) + result = CURLE_OUT_OF_MEMORY; + + return result; +} + +/* For the IMAP "protocol connect" and "doing" phases only */ +static int imap_getsock(struct connectdata *conn, curl_socket_t *socks, + int numsocks) +{ + return Curl_pp_getsock(&conn->proto.imapc.pp, socks, numsocks); +} + +/*********************************************************************** + * + * imap_connect() + * + * This function should do everything that is to be considered a part of the + * connection phase. + * + * The variable 'done' points to will be TRUE if the protocol-layer connect + * phase is done when this function returns, or FALSE if not. + */ +static CURLcode imap_connect(struct connectdata *conn, bool *done) +{ + CURLcode result = CURLE_OK; + struct imap_conn *imapc = &conn->proto.imapc; + struct pingpong *pp = &imapc->pp; + + *done = FALSE; /* default to not done yet */ + + /* We always support persistent connections in IMAP */ + connkeep(conn, "IMAP default"); + + /* Set the default response time-out */ + pp->response_time = RESP_TIMEOUT; + pp->statemach_act = imap_statemach_act; + pp->endofresp = imap_endofresp; + pp->conn = conn; + + /* Set the default preferred authentication type and mechanism */ + imapc->preftype = IMAP_TYPE_ANY; + Curl_sasl_init(&imapc->sasl, &saslimap); + + /* Initialise the pingpong layer */ + Curl_pp_init(pp); + + /* Parse the URL options */ + result = imap_parse_url_options(conn); + if(result) + return result; + + /* Start off waiting for the server greeting response */ + state(conn, IMAP_SERVERGREET); + + /* Start off with an response id of '*' */ + strcpy(imapc->resptag, "*"); + + result = imap_multi_statemach(conn, done); + + return result; +} + +/*********************************************************************** + * + * imap_done() + * + * The DONE function. This does what needs to be done after a single DO has + * performed. + * + * Input argument is already checked for validity. + */ +static CURLcode imap_done(struct connectdata *conn, CURLcode status, + bool premature) +{ + CURLcode result = CURLE_OK; + struct Curl_easy *data = conn->data; + struct IMAP *imap = data->req.protop; + + (void)premature; + + if(!imap) + return CURLE_OK; + + if(status) { + connclose(conn, "IMAP done with bad status"); /* marked for closure */ + result = status; /* use the already set error code */ + } + else if(!data->set.connect_only && !imap->custom && + (imap->uid || imap->mindex || data->set.upload || + data->set.mimepost.kind != MIMEKIND_NONE)) { + /* Handle responses after FETCH or APPEND transfer has finished */ + + if(!data->set.upload && data->set.mimepost.kind == MIMEKIND_NONE) + state(conn, IMAP_FETCH_FINAL); + else { + /* End the APPEND command first by sending an empty line */ + result = Curl_pp_sendf(&conn->proto.imapc.pp, "%s", ""); + if(!result) + state(conn, IMAP_APPEND_FINAL); + } + + /* Run the state-machine + + TODO: when the multi interface is used, this _really_ should be using + the imap_multi_statemach function but we have no general support for + non-blocking DONE operations! + */ + if(!result) + result = imap_block_statemach(conn); + } + + /* Cleanup our per-request based variables */ + Curl_safefree(imap->mailbox); + Curl_safefree(imap->uidvalidity); + Curl_safefree(imap->uid); + Curl_safefree(imap->mindex); + Curl_safefree(imap->section); + Curl_safefree(imap->partial); + Curl_safefree(imap->query); + Curl_safefree(imap->custom); + Curl_safefree(imap->custom_params); + + /* Clear the transfer mode for the next request */ + imap->transfer = FTPTRANSFER_BODY; + + return result; +} + +/*********************************************************************** + * + * imap_perform() + * + * This is the actual DO function for IMAP. Fetch or append a message, or do + * other things according to the options previously setup. + */ +static CURLcode imap_perform(struct connectdata *conn, bool *connected, + bool *dophase_done) +{ + /* This is IMAP and no proxy */ + CURLcode result = CURLE_OK; + struct Curl_easy *data = conn->data; + struct IMAP *imap = data->req.protop; + struct imap_conn *imapc = &conn->proto.imapc; + bool selected = FALSE; + + DEBUGF(infof(conn->data, "DO phase starts\n")); + + if(conn->data->set.opt_no_body) { + /* Requested no body means no transfer */ + imap->transfer = FTPTRANSFER_INFO; + } + + *dophase_done = FALSE; /* not done yet */ + + /* Determine if the requested mailbox (with the same UIDVALIDITY if set) + has already been selected on this connection */ + if(imap->mailbox && imapc->mailbox && + strcasecompare(imap->mailbox, imapc->mailbox) && + (!imap->uidvalidity || !imapc->mailbox_uidvalidity || + strcasecompare(imap->uidvalidity, imapc->mailbox_uidvalidity))) + selected = TRUE; + + /* Start the first command in the DO phase */ + if(conn->data->set.upload || data->set.mimepost.kind != MIMEKIND_NONE) + /* APPEND can be executed directly */ + result = imap_perform_append(conn); + else if(imap->custom && (selected || !imap->mailbox)) + /* Custom command using the same mailbox or no mailbox */ + result = imap_perform_list(conn); + else if(!imap->custom && selected && (imap->uid || imap->mindex)) + /* FETCH from the same mailbox */ + result = imap_perform_fetch(conn); + else if(!imap->custom && selected && imap->query) + /* SEARCH the current mailbox */ + result = imap_perform_search(conn); + else if(imap->mailbox && !selected && + (imap->custom || imap->uid || imap->mindex || imap->query)) + /* SELECT the mailbox */ + result = imap_perform_select(conn); + else + /* LIST */ + result = imap_perform_list(conn); + + if(result) + return result; + + /* Run the state-machine */ + result = imap_multi_statemach(conn, dophase_done); + + *connected = conn->bits.tcpconnect[FIRSTSOCKET]; + + if(*dophase_done) + DEBUGF(infof(conn->data, "DO phase is complete\n")); + + return result; +} + +/*********************************************************************** + * + * imap_do() + * + * This function is registered as 'curl_do' function. It decodes the path + * parts etc as a wrapper to the actual DO function (imap_perform). + * + * The input argument is already checked for validity. + */ +static CURLcode imap_do(struct connectdata *conn, bool *done) +{ + CURLcode result = CURLE_OK; + + *done = FALSE; /* default to false */ + + /* Parse the URL path */ + result = imap_parse_url_path(conn); + if(result) + return result; + + /* Parse the custom request */ + result = imap_parse_custom_request(conn); + if(result) + return result; + + result = imap_regular_transfer(conn, done); + + return result; +} + +/*********************************************************************** + * + * imap_disconnect() + * + * Disconnect from an IMAP server. Cleanup protocol-specific per-connection + * resources. BLOCKING. + */ +static CURLcode imap_disconnect(struct connectdata *conn, bool dead_connection) +{ + struct imap_conn *imapc = &conn->proto.imapc; + + /* We cannot send quit unconditionally. If this connection is stale or + bad in any way, sending quit and waiting around here will make the + disconnect wait in vain and cause more problems than we need to. */ + + /* The IMAP session may or may not have been allocated/setup at this + point! */ + if(!dead_connection && imapc->pp.conn && imapc->pp.conn->bits.protoconnstart) + if(!imap_perform_logout(conn)) + (void)imap_block_statemach(conn); /* ignore errors on LOGOUT */ + + /* Disconnect from the server */ + Curl_pp_disconnect(&imapc->pp); + + /* Cleanup the SASL module */ + Curl_sasl_cleanup(conn, imapc->sasl.authused); + + /* Cleanup our connection based variables */ + Curl_safefree(imapc->mailbox); + Curl_safefree(imapc->mailbox_uidvalidity); + + return CURLE_OK; +} + +/* Call this when the DO phase has completed */ +static CURLcode imap_dophase_done(struct connectdata *conn, bool connected) +{ + struct IMAP *imap = conn->data->req.protop; + + (void)connected; + + if(imap->transfer != FTPTRANSFER_BODY) + /* no data to transfer */ + Curl_setup_transfer(conn, -1, -1, FALSE, NULL, -1, NULL); + + return CURLE_OK; +} + +/* Called from multi.c while DOing */ +static CURLcode imap_doing(struct connectdata *conn, bool *dophase_done) +{ + CURLcode result = imap_multi_statemach(conn, dophase_done); + + if(result) + DEBUGF(infof(conn->data, "DO phase failed\n")); + else if(*dophase_done) { + result = imap_dophase_done(conn, FALSE /* not connected */); + + DEBUGF(infof(conn->data, "DO phase is complete\n")); + } + + return result; +} + +/*********************************************************************** + * + * imap_regular_transfer() + * + * The input argument is already checked for validity. + * + * Performs all commands done before a regular transfer between a local and a + * remote host. + */ +static CURLcode imap_regular_transfer(struct connectdata *conn, + bool *dophase_done) +{ + CURLcode result = CURLE_OK; + bool connected = FALSE; + struct Curl_easy *data = conn->data; + + /* Make sure size is unknown at this point */ + data->req.size = -1; + + /* Set the progress data */ + Curl_pgrsSetUploadCounter(data, 0); + Curl_pgrsSetDownloadCounter(data, 0); + Curl_pgrsSetUploadSize(data, -1); + Curl_pgrsSetDownloadSize(data, -1); + + /* Carry out the perform */ + result = imap_perform(conn, &connected, dophase_done); + + /* Perform post DO phase operations if necessary */ + if(!result && *dophase_done) + result = imap_dophase_done(conn, connected); + + return result; +} + +static CURLcode imap_setup_connection(struct connectdata *conn) +{ + /* Initialise the IMAP layer */ + CURLcode result = imap_init(conn); + if(result) + return result; + + /* Clear the TLS upgraded flag */ + conn->tls_upgraded = FALSE; + + return CURLE_OK; +} + +/*********************************************************************** + * + * imap_sendf() + * + * Sends the formatted string as an IMAP command to the server. + * + * Designed to never block. + */ +static CURLcode imap_sendf(struct connectdata *conn, const char *fmt, ...) +{ + CURLcode result = CURLE_OK; + struct imap_conn *imapc = &conn->proto.imapc; + char *taggedfmt; + va_list ap; + + DEBUGASSERT(fmt); + + /* Calculate the next command ID wrapping at 3 digits */ + imapc->cmdid = (imapc->cmdid + 1) % 1000; + + /* Calculate the tag based on the connection ID and command ID */ + snprintf(imapc->resptag, sizeof(imapc->resptag), "%c%03d", + 'A' + curlx_sltosi(conn->connection_id % 26), imapc->cmdid); + + /* Prefix the format with the tag */ + taggedfmt = aprintf("%s %s", imapc->resptag, fmt); + if(!taggedfmt) + return CURLE_OUT_OF_MEMORY; + + /* Send the data with the tag */ + va_start(ap, fmt); + result = Curl_pp_vsendf(&imapc->pp, taggedfmt, ap); + va_end(ap); + + free(taggedfmt); + + return result; +} + +/*********************************************************************** + * + * imap_atom() + * + * Checks the input string for characters that need escaping and returns an + * atom ready for sending to the server. + * + * The returned string needs to be freed. + * + */ +static char *imap_atom(const char *str, bool escape_only) +{ + /* !checksrc! disable PARENBRACE 1 */ + const char atom_specials[] = "(){ %*]"; + const char *p1; + char *p2; + size_t backsp_count = 0; + size_t quote_count = 0; + bool others_exists = FALSE; + size_t newlen = 0; + char *newstr = NULL; + + if(!str) + return NULL; + + /* Look for "atom-specials", counting the backslash and quote characters as + these will need escapping */ + p1 = str; + while(*p1) { + if(*p1 == '\\') + backsp_count++; + else if(*p1 == '"') + quote_count++; + else if(!escape_only) { + const char *p3 = atom_specials; + + while(*p3 && !others_exists) { + if(*p1 == *p3) + others_exists = TRUE; + + p3++; + } + } + + p1++; + } + + /* Does the input contain any "atom-special" characters? */ + if(!backsp_count && !quote_count && !others_exists) + return strdup(str); + + /* Calculate the new string length */ + newlen = strlen(str) + backsp_count + quote_count + (escape_only ? 0 : 2); + + /* Allocate the new string */ + newstr = (char *) malloc((newlen + 1) * sizeof(char)); + if(!newstr) + return NULL; + + /* Surround the string in quotes if necessary */ + p2 = newstr; + if(!escape_only) { + newstr[0] = '"'; + newstr[newlen - 1] = '"'; + p2++; + } + + /* Copy the string, escaping backslash and quote characters along the way */ + p1 = str; + while(*p1) { + if(*p1 == '\\' || *p1 == '"') { + *p2 = '\\'; + p2++; + } + + *p2 = *p1; + + p1++; + p2++; + } + + /* Terminate the string */ + newstr[newlen] = '\0'; + + return newstr; +} + +/*********************************************************************** + * + * imap_is_bchar() + * + * Portable test of whether the specified char is a "bchar" as defined in the + * grammar of RFC-5092. + */ +static bool imap_is_bchar(char ch) +{ + switch(ch) { + /* bchar */ + case ':': case '@': case '/': + /* bchar -> achar */ + case '&': case '=': + /* bchar -> achar -> uchar -> unreserved */ + case '0': case '1': case '2': case '3': case '4': case '5': case '6': + case '7': case '8': case '9': + case 'A': case 'B': case 'C': case 'D': case 'E': case 'F': case 'G': + case 'H': case 'I': case 'J': case 'K': case 'L': case 'M': case 'N': + case 'O': case 'P': case 'Q': case 'R': case 'S': case 'T': case 'U': + case 'V': case 'W': case 'X': case 'Y': case 'Z': + case 'a': case 'b': case 'c': case 'd': case 'e': case 'f': case 'g': + case 'h': case 'i': case 'j': case 'k': case 'l': case 'm': case 'n': + case 'o': case 'p': case 'q': case 'r': case 's': case 't': case 'u': + case 'v': case 'w': case 'x': case 'y': case 'z': + case '-': case '.': case '_': case '~': + /* bchar -> achar -> uchar -> sub-delims-sh */ + case '!': case '$': case '\'': case '(': case ')': case '*': + case '+': case ',': + /* bchar -> achar -> uchar -> pct-encoded */ + case '%': /* HEXDIG chars are already included above */ + return true; + + default: + return false; + } +} + +/*********************************************************************** + * + * imap_parse_url_options() + * + * Parse the URL login options. + */ +static CURLcode imap_parse_url_options(struct connectdata *conn) +{ + CURLcode result = CURLE_OK; + struct imap_conn *imapc = &conn->proto.imapc; + const char *ptr = conn->options; + + imapc->sasl.resetprefs = TRUE; + + while(!result && ptr && *ptr) { + const char *key = ptr; + const char *value; + + while(*ptr && *ptr != '=') + ptr++; + + value = ptr + 1; + + while(*ptr && *ptr != ';') + ptr++; + + if(strncasecompare(key, "AUTH=", 5)) + result = Curl_sasl_parse_url_auth_option(&imapc->sasl, + value, ptr - value); + else + result = CURLE_URL_MALFORMAT; + + if(*ptr == ';') + ptr++; + } + + switch(imapc->sasl.prefmech) { + case SASL_AUTH_NONE: + imapc->preftype = IMAP_TYPE_NONE; + break; + case SASL_AUTH_DEFAULT: + imapc->preftype = IMAP_TYPE_ANY; + break; + default: + imapc->preftype = IMAP_TYPE_SASL; + break; + } + + return result; +} + +/*********************************************************************** + * + * imap_parse_url_path() + * + * Parse the URL path into separate path components. + * + */ +static CURLcode imap_parse_url_path(struct connectdata *conn) +{ + /* The imap struct is already initialised in imap_connect() */ + CURLcode result = CURLE_OK; + struct Curl_easy *data = conn->data; + struct IMAP *imap = data->req.protop; + const char *begin = &data->state.up.path[1]; /* skip leading slash */ + const char *ptr = begin; + + /* See how much of the URL is a valid path and decode it */ + while(imap_is_bchar(*ptr)) + ptr++; + + if(ptr != begin) { + /* Remove the trailing slash if present */ + const char *end = ptr; + if(end > begin && end[-1] == '/') + end--; + + result = Curl_urldecode(data, begin, end - begin, &imap->mailbox, NULL, + TRUE); + if(result) + return result; + } + else + imap->mailbox = NULL; + + /* There can be any number of parameters in the form ";NAME=VALUE" */ + while(*ptr == ';') { + char *name; + char *value; + size_t valuelen; + + /* Find the length of the name parameter */ + begin = ++ptr; + while(*ptr && *ptr != '=') + ptr++; + + if(!*ptr) + return CURLE_URL_MALFORMAT; + + /* Decode the name parameter */ + result = Curl_urldecode(data, begin, ptr - begin, &name, NULL, TRUE); + if(result) + return result; + + /* Find the length of the value parameter */ + begin = ++ptr; + while(imap_is_bchar(*ptr)) + ptr++; + + /* Decode the value parameter */ + result = Curl_urldecode(data, begin, ptr - begin, &value, &valuelen, TRUE); + if(result) { + free(name); + return result; + } + + DEBUGF(infof(conn->data, "IMAP URL parameter '%s' = '%s'\n", name, value)); + + /* Process the known hierarchical parameters (UIDVALIDITY, UID, SECTION and + PARTIAL) stripping of the trailing slash character if it is present. + + Note: Unknown parameters trigger a URL_MALFORMAT error. */ + if(strcasecompare(name, "UIDVALIDITY") && !imap->uidvalidity) { + if(valuelen > 0 && value[valuelen - 1] == '/') + value[valuelen - 1] = '\0'; + + imap->uidvalidity = value; + value = NULL; + } + else if(strcasecompare(name, "UID") && !imap->uid) { + if(valuelen > 0 && value[valuelen - 1] == '/') + value[valuelen - 1] = '\0'; + + imap->uid = value; + value = NULL; + } + else if(strcasecompare(name, "MAILINDEX") && !imap->mindex) { + if(valuelen > 0 && value[valuelen - 1] == '/') + value[valuelen - 1] = '\0'; + + imap->mindex = value; + value = NULL; + } + else if(strcasecompare(name, "SECTION") && !imap->section) { + if(valuelen > 0 && value[valuelen - 1] == '/') + value[valuelen - 1] = '\0'; + + imap->section = value; + value = NULL; + } + else if(strcasecompare(name, "PARTIAL") && !imap->partial) { + if(valuelen > 0 && value[valuelen - 1] == '/') + value[valuelen - 1] = '\0'; + + imap->partial = value; + value = NULL; + } + else { + free(name); + free(value); + + return CURLE_URL_MALFORMAT; + } + + free(name); + free(value); + } + + /* Does the URL contain a query parameter? Only valid when we have a mailbox + and no UID as per RFC-5092 */ + if(imap->mailbox && !imap->uid && !imap->mindex) { + /* Get the query parameter, URL decoded */ + (void)curl_url_get(data->state.uh, CURLUPART_QUERY, &imap->query, + CURLU_URLDECODE); + } + + /* Any extra stuff at the end of the URL is an error */ + if(*ptr) + return CURLE_URL_MALFORMAT; + + return CURLE_OK; +} + +/*********************************************************************** + * + * imap_parse_custom_request() + * + * Parse the custom request. + */ +static CURLcode imap_parse_custom_request(struct connectdata *conn) +{ + CURLcode result = CURLE_OK; + struct Curl_easy *data = conn->data; + struct IMAP *imap = data->req.protop; + const char *custom = data->set.str[STRING_CUSTOMREQUEST]; + + if(custom) { + /* URL decode the custom request */ + result = Curl_urldecode(data, custom, 0, &imap->custom, NULL, TRUE); + + /* Extract the parameters if specified */ + if(!result) { + const char *params = imap->custom; + + while(*params && *params != ' ') + params++; + + if(*params) { + imap->custom_params = strdup(params); + imap->custom[params - imap->custom] = '\0'; + + if(!imap->custom_params) + result = CURLE_OUT_OF_MEMORY; + } + } + } + + return result; +} + +#endif /* CURL_DISABLE_IMAP */ |