diff options
Diffstat (limited to 'Utilities/cmcurl/lib/ssh.c')
| -rw-r--r-- | Utilities/cmcurl/lib/ssh.c | 3348 |
1 files changed, 3348 insertions, 0 deletions
diff --git a/Utilities/cmcurl/lib/ssh.c b/Utilities/cmcurl/lib/ssh.c new file mode 100644 index 0000000..bf7bd54 --- /dev/null +++ b/Utilities/cmcurl/lib/ssh.c @@ -0,0 +1,3348 @@ +/*************************************************************************** + * _ _ ____ _ + * Project ___| | | | _ \| | + * / __| | | | |_) | | + * | (__| |_| | _ <| |___ + * \___|\___/|_| \_\_____| + * + * Copyright (C) 1998 - 2018, Daniel Stenberg, <daniel@haxx.se>, et al. + * + * This software is licensed as described in the file COPYING, which + * you should have received as part of this distribution. The terms + * are also available at https://curl.haxx.se/docs/copyright.html. + * + * You may opt to use, copy, modify, merge, publish, distribute and/or sell + * copies of the Software, and permit persons to whom the Software is + * furnished to do so, under the terms of the COPYING file. + * + * This software is distributed on an "AS IS" basis, WITHOUT WARRANTY OF ANY + * KIND, either express or implied. + * + ***************************************************************************/ + +/* #define CURL_LIBSSH2_DEBUG */ + +#include "curl_setup.h" + +#ifdef USE_LIBSSH2 + +#include <limits.h> + +#include <libssh2.h> +#include <libssh2_sftp.h> + +#ifdef HAVE_FCNTL_H +#include <fcntl.h> +#endif + +#ifdef HAVE_NETINET_IN_H +#include <netinet/in.h> +#endif +#ifdef HAVE_ARPA_INET_H +#include <arpa/inet.h> +#endif +#ifdef HAVE_UTSNAME_H +#include <sys/utsname.h> +#endif +#ifdef HAVE_NETDB_H +#include <netdb.h> +#endif +#ifdef __VMS +#include <in.h> +#include <inet.h> +#endif + +#if (defined(NETWARE) && defined(__NOVELL_LIBC__)) +#undef in_addr_t +#define in_addr_t unsigned long +#endif + +#include <curl/curl.h> +#include "urldata.h" +#include "sendf.h" +#include "hostip.h" +#include "progress.h" +#include "transfer.h" +#include "escape.h" +#include "http.h" /* for HTTP proxy tunnel stuff */ +#include "ssh.h" +#include "url.h" +#include "speedcheck.h" +#include "getinfo.h" +#include "strdup.h" +#include "strcase.h" +#include "vtls/vtls.h" +#include "connect.h" +#include "strerror.h" +#include "inet_ntop.h" +#include "parsedate.h" /* for the week day and month names */ +#include "sockaddr.h" /* required for Curl_sockaddr_storage */ +#include "strtoofft.h" +#include "multiif.h" +#include "select.h" +#include "warnless.h" + +/* The last 3 #include files should be in this order */ +#include "curl_printf.h" +#include "curl_memory.h" +#include "curl_path.h" +#include "memdebug.h" + +#if LIBSSH2_VERSION_NUM >= 0x010206 +/* libssh2_sftp_statvfs and friends were added in 1.2.6 */ +#define HAS_STATVFS_SUPPORT 1 +#endif + +#define sftp_libssh2_last_error(s) curlx_ultosi(libssh2_sftp_last_error(s)) + +#define sftp_libssh2_realpath(s,p,t,m) \ + libssh2_sftp_symlink_ex((s), (p), curlx_uztoui(strlen(p)), \ + (t), (m), LIBSSH2_SFTP_REALPATH) + + +/* Local functions: */ +static const char *sftp_libssh2_strerror(int err); +static LIBSSH2_ALLOC_FUNC(my_libssh2_malloc); +static LIBSSH2_REALLOC_FUNC(my_libssh2_realloc); +static LIBSSH2_FREE_FUNC(my_libssh2_free); + +static CURLcode ssh_connect(struct connectdata *conn, bool *done); +static CURLcode ssh_multi_statemach(struct connectdata *conn, bool *done); +static CURLcode ssh_do(struct connectdata *conn, bool *done); + +static CURLcode scp_done(struct connectdata *conn, + CURLcode, bool premature); +static CURLcode scp_doing(struct connectdata *conn, + bool *dophase_done); +static CURLcode scp_disconnect(struct connectdata *conn, bool dead_connection); + +static CURLcode sftp_done(struct connectdata *conn, + CURLcode, bool premature); +static CURLcode sftp_doing(struct connectdata *conn, + bool *dophase_done); +static CURLcode sftp_disconnect(struct connectdata *conn, bool dead); +static +CURLcode sftp_perform(struct connectdata *conn, + bool *connected, + bool *dophase_done); + +static int ssh_getsock(struct connectdata *conn, + curl_socket_t *sock, /* points to numsocks number + of sockets */ + int numsocks); + +static int ssh_perform_getsock(const struct connectdata *conn, + curl_socket_t *sock, /* points to numsocks + number of sockets */ + int numsocks); + +static CURLcode ssh_setup_connection(struct connectdata *conn); + +/* + * SCP protocol handler. + */ + +const struct Curl_handler Curl_handler_scp = { + "SCP", /* scheme */ + ssh_setup_connection, /* setup_connection */ + ssh_do, /* do_it */ + scp_done, /* done */ + ZERO_NULL, /* do_more */ + ssh_connect, /* connect_it */ + ssh_multi_statemach, /* connecting */ + scp_doing, /* doing */ + ssh_getsock, /* proto_getsock */ + ssh_getsock, /* doing_getsock */ + ZERO_NULL, /* domore_getsock */ + ssh_perform_getsock, /* perform_getsock */ + scp_disconnect, /* disconnect */ + ZERO_NULL, /* readwrite */ + ZERO_NULL, /* connection_check */ + PORT_SSH, /* defport */ + CURLPROTO_SCP, /* protocol */ + PROTOPT_DIRLOCK | PROTOPT_CLOSEACTION + | PROTOPT_NOURLQUERY /* flags */ +}; + + +/* + * SFTP protocol handler. + */ + +const struct Curl_handler Curl_handler_sftp = { + "SFTP", /* scheme */ + ssh_setup_connection, /* setup_connection */ + ssh_do, /* do_it */ + sftp_done, /* done */ + ZERO_NULL, /* do_more */ + ssh_connect, /* connect_it */ + ssh_multi_statemach, /* connecting */ + sftp_doing, /* doing */ + ssh_getsock, /* proto_getsock */ + ssh_getsock, /* doing_getsock */ + ZERO_NULL, /* domore_getsock */ + ssh_perform_getsock, /* perform_getsock */ + sftp_disconnect, /* disconnect */ + ZERO_NULL, /* readwrite */ + ZERO_NULL, /* connection_check */ + PORT_SSH, /* defport */ + CURLPROTO_SFTP, /* protocol */ + PROTOPT_DIRLOCK | PROTOPT_CLOSEACTION + | PROTOPT_NOURLQUERY /* flags */ +}; + +static void +kbd_callback(const char *name, int name_len, const char *instruction, + int instruction_len, int num_prompts, + const LIBSSH2_USERAUTH_KBDINT_PROMPT *prompts, + LIBSSH2_USERAUTH_KBDINT_RESPONSE *responses, + void **abstract) +{ + struct connectdata *conn = (struct connectdata *)*abstract; + +#ifdef CURL_LIBSSH2_DEBUG + fprintf(stderr, "name=%s\n", name); + fprintf(stderr, "name_len=%d\n", name_len); + fprintf(stderr, "instruction=%s\n", instruction); + fprintf(stderr, "instruction_len=%d\n", instruction_len); + fprintf(stderr, "num_prompts=%d\n", num_prompts); +#else + (void)name; + (void)name_len; + (void)instruction; + (void)instruction_len; +#endif /* CURL_LIBSSH2_DEBUG */ + if(num_prompts == 1) { + responses[0].text = strdup(conn->passwd); + responses[0].length = curlx_uztoui(strlen(conn->passwd)); + } + (void)prompts; + (void)abstract; +} /* kbd_callback */ + +static CURLcode sftp_libssh2_error_to_CURLE(int err) +{ + switch(err) { + case LIBSSH2_FX_OK: + return CURLE_OK; + + case LIBSSH2_FX_NO_SUCH_FILE: + case LIBSSH2_FX_NO_SUCH_PATH: + return CURLE_REMOTE_FILE_NOT_FOUND; + + case LIBSSH2_FX_PERMISSION_DENIED: + case LIBSSH2_FX_WRITE_PROTECT: + case LIBSSH2_FX_LOCK_CONFlICT: + return CURLE_REMOTE_ACCESS_DENIED; + + case LIBSSH2_FX_NO_SPACE_ON_FILESYSTEM: + case LIBSSH2_FX_QUOTA_EXCEEDED: + return CURLE_REMOTE_DISK_FULL; + + case LIBSSH2_FX_FILE_ALREADY_EXISTS: + return CURLE_REMOTE_FILE_EXISTS; + + case LIBSSH2_FX_DIR_NOT_EMPTY: + return CURLE_QUOTE_ERROR; + + default: + break; + } + + return CURLE_SSH; +} + +static CURLcode libssh2_session_error_to_CURLE(int err) +{ + switch(err) { + /* Ordered by order of appearance in libssh2.h */ + case LIBSSH2_ERROR_NONE: + return CURLE_OK; + + /* This is the error returned by libssh2_scp_recv2 + * on unknown file */ + case LIBSSH2_ERROR_SCP_PROTOCOL: + return CURLE_REMOTE_FILE_NOT_FOUND; + + case LIBSSH2_ERROR_SOCKET_NONE: + return CURLE_COULDNT_CONNECT; + + case LIBSSH2_ERROR_ALLOC: + return CURLE_OUT_OF_MEMORY; + + case LIBSSH2_ERROR_SOCKET_SEND: + return CURLE_SEND_ERROR; + + case LIBSSH2_ERROR_HOSTKEY_INIT: + case LIBSSH2_ERROR_HOSTKEY_SIGN: + case LIBSSH2_ERROR_PUBLICKEY_UNRECOGNIZED: + case LIBSSH2_ERROR_PUBLICKEY_UNVERIFIED: + return CURLE_PEER_FAILED_VERIFICATION; + + case LIBSSH2_ERROR_PASSWORD_EXPIRED: + return CURLE_LOGIN_DENIED; + + case LIBSSH2_ERROR_SOCKET_TIMEOUT: + case LIBSSH2_ERROR_TIMEOUT: + return CURLE_OPERATION_TIMEDOUT; + + case LIBSSH2_ERROR_EAGAIN: + return CURLE_AGAIN; + } + + /* TODO: map some more of the libssh2 errors to the more appropriate CURLcode + error code, and possibly add a few new SSH-related one. We must however + not return or even depend on libssh2 errors in the public libcurl API */ + + return CURLE_SSH; +} + +static LIBSSH2_ALLOC_FUNC(my_libssh2_malloc) +{ + (void)abstract; /* arg not used */ + return malloc(count); +} + +static LIBSSH2_REALLOC_FUNC(my_libssh2_realloc) +{ + (void)abstract; /* arg not used */ + return realloc(ptr, count); +} + +static LIBSSH2_FREE_FUNC(my_libssh2_free) +{ + (void)abstract; /* arg not used */ + if(ptr) /* ssh2 agent sometimes call free with null ptr */ + free(ptr); +} + +/* + * SSH State machine related code + */ +/* This is the ONLY way to change SSH state! */ +static void state(struct connectdata *conn, sshstate nowstate) +{ + struct ssh_conn *sshc = &conn->proto.sshc; +#if defined(DEBUGBUILD) && !defined(CURL_DISABLE_VERBOSE_STRINGS) + /* for debug purposes */ + static const char * const names[] = { + "SSH_STOP", + "SSH_INIT", + "SSH_S_STARTUP", + "SSH_HOSTKEY", + "SSH_AUTHLIST", + "SSH_AUTH_PKEY_INIT", + "SSH_AUTH_PKEY", + "SSH_AUTH_PASS_INIT", + "SSH_AUTH_PASS", + "SSH_AUTH_AGENT_INIT", + "SSH_AUTH_AGENT_LIST", + "SSH_AUTH_AGENT", + "SSH_AUTH_HOST_INIT", + "SSH_AUTH_HOST", + "SSH_AUTH_KEY_INIT", + "SSH_AUTH_KEY", + "SSH_AUTH_GSSAPI", + "SSH_AUTH_DONE", + "SSH_SFTP_INIT", + "SSH_SFTP_REALPATH", + "SSH_SFTP_QUOTE_INIT", + "SSH_SFTP_POSTQUOTE_INIT", + "SSH_SFTP_QUOTE", + "SSH_SFTP_NEXT_QUOTE", + "SSH_SFTP_QUOTE_STAT", + "SSH_SFTP_QUOTE_SETSTAT", + "SSH_SFTP_QUOTE_SYMLINK", + "SSH_SFTP_QUOTE_MKDIR", + "SSH_SFTP_QUOTE_RENAME", + "SSH_SFTP_QUOTE_RMDIR", + "SSH_SFTP_QUOTE_UNLINK", + "SSH_SFTP_QUOTE_STATVFS", + "SSH_SFTP_GETINFO", + "SSH_SFTP_FILETIME", + "SSH_SFTP_TRANS_INIT", + "SSH_SFTP_UPLOAD_INIT", + "SSH_SFTP_CREATE_DIRS_INIT", + "SSH_SFTP_CREATE_DIRS", + "SSH_SFTP_CREATE_DIRS_MKDIR", + "SSH_SFTP_READDIR_INIT", + "SSH_SFTP_READDIR", + "SSH_SFTP_READDIR_LINK", + "SSH_SFTP_READDIR_BOTTOM", + "SSH_SFTP_READDIR_DONE", + "SSH_SFTP_DOWNLOAD_INIT", + "SSH_SFTP_DOWNLOAD_STAT", + "SSH_SFTP_CLOSE", + "SSH_SFTP_SHUTDOWN", + "SSH_SCP_TRANS_INIT", + "SSH_SCP_UPLOAD_INIT", + "SSH_SCP_DOWNLOAD_INIT", + "SSH_SCP_DOWNLOAD", + "SSH_SCP_DONE", + "SSH_SCP_SEND_EOF", + "SSH_SCP_WAIT_EOF", + "SSH_SCP_WAIT_CLOSE", + "SSH_SCP_CHANNEL_FREE", + "SSH_SESSION_DISCONNECT", + "SSH_SESSION_FREE", + "QUIT" + }; + + /* a precaution to make sure the lists are in sync */ + DEBUGASSERT(sizeof(names)/sizeof(names[0]) == SSH_LAST); + + if(sshc->state != nowstate) { + infof(conn->data, "SFTP %p state change from %s to %s\n", + (void *)sshc, names[sshc->state], names[nowstate]); + } +#endif + + sshc->state = nowstate; +} + + +#ifdef HAVE_LIBSSH2_KNOWNHOST_API +static int sshkeycallback(struct Curl_easy *easy, + const struct curl_khkey *knownkey, /* known */ + const struct curl_khkey *foundkey, /* found */ + enum curl_khmatch match, + void *clientp) +{ + (void)easy; + (void)knownkey; + (void)foundkey; + (void)clientp; + + /* we only allow perfect matches, and we reject everything else */ + return (match != CURLKHMATCH_OK)?CURLKHSTAT_REJECT:CURLKHSTAT_FINE; +} +#endif + +/* + * Earlier libssh2 versions didn't have the ability to seek to 64bit positions + * with 32bit size_t. + */ +#ifdef HAVE_LIBSSH2_SFTP_SEEK64 +#define SFTP_SEEK(x,y) libssh2_sftp_seek64(x, (libssh2_uint64_t)y) +#else +#define SFTP_SEEK(x,y) libssh2_sftp_seek(x, (size_t)y) +#endif + +/* + * Earlier libssh2 versions didn't do SCP properly beyond 32bit sizes on 32bit + * architectures so we check of the necessary function is present. + */ +#ifndef HAVE_LIBSSH2_SCP_SEND64 +#define SCP_SEND(a,b,c,d) libssh2_scp_send_ex(a, b, (int)(c), (size_t)d, 0, 0) +#else +#define SCP_SEND(a,b,c,d) libssh2_scp_send64(a, b, (int)(c), \ + (libssh2_uint64_t)d, 0, 0) +#endif + +/* + * libssh2 1.2.8 fixed the problem with 32bit ints used for sockets on win64. + */ +#ifdef HAVE_LIBSSH2_SESSION_HANDSHAKE +#define libssh2_session_startup(x,y) libssh2_session_handshake(x,y) +#endif + +static CURLcode ssh_knownhost(struct connectdata *conn) +{ + CURLcode result = CURLE_OK; + +#ifdef HAVE_LIBSSH2_KNOWNHOST_API + struct Curl_easy *data = conn->data; + + if(data->set.str[STRING_SSH_KNOWNHOSTS]) { + /* we're asked to verify the host against a file */ + struct ssh_conn *sshc = &conn->proto.sshc; + int rc; + int keytype; + size_t keylen; + const char *remotekey = libssh2_session_hostkey(sshc->ssh_session, + &keylen, &keytype); + int keycheck = LIBSSH2_KNOWNHOST_CHECK_FAILURE; + int keybit = 0; + + if(remotekey) { + /* + * A subject to figure out is what host name we need to pass in here. + * What host name does OpenSSH store in its file if an IDN name is + * used? + */ + struct libssh2_knownhost *host; + enum curl_khmatch keymatch; + curl_sshkeycallback func = + data->set.ssh_keyfunc?data->set.ssh_keyfunc:sshkeycallback; + struct curl_khkey knownkey; + struct curl_khkey *knownkeyp = NULL; + struct curl_khkey foundkey; + + keybit = (keytype == LIBSSH2_HOSTKEY_TYPE_RSA)? + LIBSSH2_KNOWNHOST_KEY_SSHRSA:LIBSSH2_KNOWNHOST_KEY_SSHDSS; + +#ifdef HAVE_LIBSSH2_KNOWNHOST_CHECKP + keycheck = libssh2_knownhost_checkp(sshc->kh, + conn->host.name, + (conn->remote_port != PORT_SSH)? + conn->remote_port:-1, + remotekey, keylen, + LIBSSH2_KNOWNHOST_TYPE_PLAIN| + LIBSSH2_KNOWNHOST_KEYENC_RAW| + keybit, + &host); +#else + keycheck = libssh2_knownhost_check(sshc->kh, + conn->host.name, + remotekey, keylen, + LIBSSH2_KNOWNHOST_TYPE_PLAIN| + LIBSSH2_KNOWNHOST_KEYENC_RAW| + keybit, + &host); +#endif + + infof(data, "SSH host check: %d, key: %s\n", keycheck, + (keycheck <= LIBSSH2_KNOWNHOST_CHECK_MISMATCH)? + host->key:"<none>"); + + /* setup 'knownkey' */ + if(keycheck <= LIBSSH2_KNOWNHOST_CHECK_MISMATCH) { + knownkey.key = host->key; + knownkey.len = 0; + knownkey.keytype = (keytype == LIBSSH2_HOSTKEY_TYPE_RSA)? + CURLKHTYPE_RSA : CURLKHTYPE_DSS; + knownkeyp = &knownkey; + } + + /* setup 'foundkey' */ + foundkey.key = remotekey; + foundkey.len = keylen; + foundkey.keytype = (keytype == LIBSSH2_HOSTKEY_TYPE_RSA)? + CURLKHTYPE_RSA : CURLKHTYPE_DSS; + + /* + * if any of the LIBSSH2_KNOWNHOST_CHECK_* defines and the + * curl_khmatch enum are ever modified, we need to introduce a + * translation table here! + */ + keymatch = (enum curl_khmatch)keycheck; + + /* Ask the callback how to behave */ + Curl_set_in_callback(data, true); + rc = func(data, knownkeyp, /* from the knownhosts file */ + &foundkey, /* from the remote host */ + keymatch, data->set.ssh_keyfunc_userp); + Curl_set_in_callback(data, false); + } + else + /* no remotekey means failure! */ + rc = CURLKHSTAT_REJECT; + + switch(rc) { + default: /* unknown return codes will equal reject */ + /* FALLTHROUGH */ + case CURLKHSTAT_REJECT: + state(conn, SSH_SESSION_FREE); + /* FALLTHROUGH */ + case CURLKHSTAT_DEFER: + /* DEFER means bail out but keep the SSH_HOSTKEY state */ + result = sshc->actualcode = CURLE_PEER_FAILED_VERIFICATION; + break; + case CURLKHSTAT_FINE: + case CURLKHSTAT_FINE_ADD_TO_FILE: + /* proceed */ + if(keycheck != LIBSSH2_KNOWNHOST_CHECK_MATCH) { + /* the found host+key didn't match but has been told to be fine + anyway so we add it in memory */ + int addrc = libssh2_knownhost_add(sshc->kh, + conn->host.name, NULL, + remotekey, keylen, + LIBSSH2_KNOWNHOST_TYPE_PLAIN| + LIBSSH2_KNOWNHOST_KEYENC_RAW| + keybit, NULL); + if(addrc) + infof(data, "Warning adding the known host %s failed!\n", + conn->host.name); + else if(rc == CURLKHSTAT_FINE_ADD_TO_FILE) { + /* now we write the entire in-memory list of known hosts to the + known_hosts file */ + int wrc = + libssh2_knownhost_writefile(sshc->kh, + data->set.str[STRING_SSH_KNOWNHOSTS], + LIBSSH2_KNOWNHOST_FILE_OPENSSH); + if(wrc) { + infof(data, "Warning, writing %s failed!\n", + data->set.str[STRING_SSH_KNOWNHOSTS]); + } + } + } + break; + } + } +#else /* HAVE_LIBSSH2_KNOWNHOST_API */ + (void)conn; +#endif + return result; +} + +static CURLcode ssh_check_fingerprint(struct connectdata *conn) +{ + struct ssh_conn *sshc = &conn->proto.sshc; + struct Curl_easy *data = conn->data; + const char *pubkey_md5 = data->set.str[STRING_SSH_HOST_PUBLIC_KEY_MD5]; + char md5buffer[33]; + int i; + + const char *fingerprint = libssh2_hostkey_hash(sshc->ssh_session, + LIBSSH2_HOSTKEY_HASH_MD5); + + if(fingerprint) { + /* The fingerprint points to static storage (!), don't free() it. */ + for(i = 0; i < 16; i++) + snprintf(&md5buffer[i*2], 3, "%02x", (unsigned char) fingerprint[i]); + infof(data, "SSH MD5 fingerprint: %s\n", md5buffer); + } + + /* Before we authenticate we check the hostkey's MD5 fingerprint + * against a known fingerprint, if available. + */ + if(pubkey_md5 && strlen(pubkey_md5) == 32) { + if(!fingerprint || !strcasecompare(md5buffer, pubkey_md5)) { + if(fingerprint) + failf(data, + "Denied establishing ssh session: mismatch md5 fingerprint. " + "Remote %s is not equal to %s", md5buffer, pubkey_md5); + else + failf(data, + "Denied establishing ssh session: md5 fingerprint not available"); + state(conn, SSH_SESSION_FREE); + sshc->actualcode = CURLE_PEER_FAILED_VERIFICATION; + return sshc->actualcode; + } + infof(data, "MD5 checksum match!\n"); + /* as we already matched, we skip the check for known hosts */ + return CURLE_OK; + } + return ssh_knownhost(conn); +} + +/* + * ssh_statemach_act() runs the SSH state machine as far as it can without + * blocking and without reaching the end. The data the pointer 'block' points + * to will be set to TRUE if the libssh2 function returns LIBSSH2_ERROR_EAGAIN + * meaning it wants to be called again when the socket is ready + */ + +static CURLcode ssh_statemach_act(struct connectdata *conn, bool *block) +{ + CURLcode result = CURLE_OK; + struct Curl_easy *data = conn->data; + struct SSHPROTO *sftp_scp = data->req.protop; + struct ssh_conn *sshc = &conn->proto.sshc; + curl_socket_t sock = conn->sock[FIRSTSOCKET]; + char *new_readdir_line; + int rc = LIBSSH2_ERROR_NONE; + int err; + int seekerr = CURL_SEEKFUNC_OK; + *block = 0; /* we're not blocking by default */ + + do { + + switch(sshc->state) { + case SSH_INIT: + sshc->secondCreateDirs = 0; + sshc->nextstate = SSH_NO_STATE; + sshc->actualcode = CURLE_OK; + + /* Set libssh2 to non-blocking, since everything internally is + non-blocking */ + libssh2_session_set_blocking(sshc->ssh_session, 0); + + state(conn, SSH_S_STARTUP); + /* fall-through */ + + case SSH_S_STARTUP: + rc = libssh2_session_startup(sshc->ssh_session, (int)sock); + if(rc == LIBSSH2_ERROR_EAGAIN) { + break; + } + if(rc) { + failf(data, "Failure establishing ssh session"); + state(conn, SSH_SESSION_FREE); + sshc->actualcode = CURLE_FAILED_INIT; + break; + } + + state(conn, SSH_HOSTKEY); + + /* fall-through */ + case SSH_HOSTKEY: + /* + * Before we authenticate we should check the hostkey's fingerprint + * against our known hosts. How that is handled (reading from file, + * whatever) is up to us. + */ + result = ssh_check_fingerprint(conn); + if(!result) + state(conn, SSH_AUTHLIST); + /* ssh_check_fingerprint sets state appropriately on error */ + break; + + case SSH_AUTHLIST: + /* + * Figure out authentication methods + * NB: As soon as we have provided a username to an openssh server we + * must never change it later. Thus, always specify the correct username + * here, even though the libssh2 docs kind of indicate that it should be + * possible to get a 'generic' list (not user-specific) of authentication + * methods, presumably with a blank username. That won't work in my + * experience. + * So always specify it here. + */ + sshc->authlist = libssh2_userauth_list(sshc->ssh_session, + conn->user, + curlx_uztoui(strlen(conn->user))); + + if(!sshc->authlist) { + if(libssh2_userauth_authenticated(sshc->ssh_session)) { + sshc->authed = TRUE; + infof(data, "SSH user accepted with no authentication\n"); + state(conn, SSH_AUTH_DONE); + break; + } + err = libssh2_session_last_errno(sshc->ssh_session); + if(err == LIBSSH2_ERROR_EAGAIN) + rc = LIBSSH2_ERROR_EAGAIN; + else { + state(conn, SSH_SESSION_FREE); + sshc->actualcode = libssh2_session_error_to_CURLE(err); + } + break; + } + infof(data, "SSH authentication methods available: %s\n", + sshc->authlist); + + state(conn, SSH_AUTH_PKEY_INIT); + break; + + case SSH_AUTH_PKEY_INIT: + /* + * Check the supported auth types in the order I feel is most secure + * with the requested type of authentication + */ + sshc->authed = FALSE; + + if((data->set.ssh_auth_types & CURLSSH_AUTH_PUBLICKEY) && + (strstr(sshc->authlist, "publickey") != NULL)) { + char *home = NULL; + bool out_of_memory = FALSE; + + sshc->rsa_pub = sshc->rsa = NULL; + + /* To ponder about: should really the lib be messing about with the + HOME environment variable etc? */ + home = curl_getenv("HOME"); + + if(data->set.str[STRING_SSH_PRIVATE_KEY]) + sshc->rsa = strdup(data->set.str[STRING_SSH_PRIVATE_KEY]); + else { + /* If no private key file is specified, try some common paths. */ + if(home) { + /* Try ~/.ssh first. */ + sshc->rsa = aprintf("%s/.ssh/id_rsa", home); + if(!sshc->rsa) + out_of_memory = TRUE; + else if(access(sshc->rsa, R_OK) != 0) { + Curl_safefree(sshc->rsa); + sshc->rsa = aprintf("%s/.ssh/id_dsa", home); + if(!sshc->rsa) + out_of_memory = TRUE; + else if(access(sshc->rsa, R_OK) != 0) { + Curl_safefree(sshc->rsa); + } + } + } + if(!out_of_memory && !sshc->rsa) { + /* Nothing found; try the current dir. */ + sshc->rsa = strdup("id_rsa"); + if(sshc->rsa && access(sshc->rsa, R_OK) != 0) { + Curl_safefree(sshc->rsa); + sshc->rsa = strdup("id_dsa"); + if(sshc->rsa && access(sshc->rsa, R_OK) != 0) { + Curl_safefree(sshc->rsa); + /* Out of guesses. Set to the empty string to avoid + * surprising info messages. */ + sshc->rsa = strdup(""); + } + } + } + } + + /* + * Unless the user explicitly specifies a public key file, let + * libssh2 extract the public key from the private key file. + * This is done by simply passing sshc->rsa_pub = NULL. + */ + if(data->set.str[STRING_SSH_PUBLIC_KEY] + /* treat empty string the same way as NULL */ + && data->set.str[STRING_SSH_PUBLIC_KEY][0]) { + sshc->rsa_pub = strdup(data->set.str[STRING_SSH_PUBLIC_KEY]); + if(!sshc->rsa_pub) + out_of_memory = TRUE; + } + + if(out_of_memory || sshc->rsa == NULL) { + free(home); + Curl_safefree(sshc->rsa); + Curl_safefree(sshc->rsa_pub); + state(conn, SSH_SESSION_FREE); + sshc->actualcode = CURLE_OUT_OF_MEMORY; + break; + } + + sshc->passphrase = data->set.ssl.key_passwd; + if(!sshc->passphrase) + sshc->passphrase = ""; + + free(home); + + if(sshc->rsa_pub) + infof(data, "Using SSH public key file '%s'\n", sshc->rsa_pub); + infof(data, "Using SSH private key file '%s'\n", sshc->rsa); + + state(conn, SSH_AUTH_PKEY); + } + else { + state(conn, SSH_AUTH_PASS_INIT); + } + break; + + case SSH_AUTH_PKEY: + /* The function below checks if the files exists, no need to stat() here. + */ + rc = libssh2_userauth_publickey_fromfile_ex(sshc->ssh_session, + conn->user, + curlx_uztoui( + strlen(conn->user)), + sshc->rsa_pub, + sshc->rsa, sshc->passphrase); + if(rc == LIBSSH2_ERROR_EAGAIN) { + break; + } + + Curl_safefree(sshc->rsa_pub); + Curl_safefree(sshc->rsa); + + if(rc == 0) { + sshc->authed = TRUE; + infof(data, "Initialized SSH public key authentication\n"); + state(conn, SSH_AUTH_DONE); + } + else { + char *err_msg = NULL; + (void)libssh2_session_last_error(sshc->ssh_session, + &err_msg, NULL, 0); + infof(data, "SSH public key authentication failed: %s\n", err_msg); + state(conn, SSH_AUTH_PASS_INIT); + rc = 0; /* clear rc and continue */ + } + break; + + case SSH_AUTH_PASS_INIT: + if((data->set.ssh_auth_types & CURLSSH_AUTH_PASSWORD) && + (strstr(sshc->authlist, "password") != NULL)) { + state(conn, SSH_AUTH_PASS); + } + else { + state(conn, SSH_AUTH_HOST_INIT); + rc = 0; /* clear rc and continue */ + } + break; + + case SSH_AUTH_PASS: + rc = libssh2_userauth_password_ex(sshc->ssh_session, conn->user, + curlx_uztoui(strlen(conn->user)), + conn->passwd, + curlx_uztoui(strlen(conn->passwd)), + NULL); + if(rc == LIBSSH2_ERROR_EAGAIN) { + break; + } + if(rc == 0) { + sshc->authed = TRUE; + infof(data, "Initialized password authentication\n"); + state(conn, SSH_AUTH_DONE); + } + else { + state(conn, SSH_AUTH_HOST_INIT); + rc = 0; /* clear rc and continue */ + } + break; + + case SSH_AUTH_HOST_INIT: + if((data->set.ssh_auth_types & CURLSSH_AUTH_HOST) && + (strstr(sshc->authlist, "hostbased") != NULL)) { + state(conn, SSH_AUTH_HOST); + } + else { + state(conn, SSH_AUTH_AGENT_INIT); + } + break; + + case SSH_AUTH_HOST: + state(conn, SSH_AUTH_AGENT_INIT); + break; + + case SSH_AUTH_AGENT_INIT: +#ifdef HAVE_LIBSSH2_AGENT_API + if((data->set.ssh_auth_types & CURLSSH_AUTH_AGENT) + && (strstr(sshc->authlist, "publickey") != NULL)) { + + /* Connect to the ssh-agent */ + /* The agent could be shared by a curl thread i believe + but nothing obvious as keys can be added/removed at any time */ + if(!sshc->ssh_agent) { + sshc->ssh_agent = libssh2_agent_init(sshc->ssh_session); + if(!sshc->ssh_agent) { + infof(data, "Could not create agent object\n"); + + state(conn, SSH_AUTH_KEY_INIT); + break; + } + } + + rc = libssh2_agent_connect(sshc->ssh_agent); + if(rc == LIBSSH2_ERROR_EAGAIN) + break; + if(rc < 0) { + infof(data, "Failure connecting to agent\n"); + state(conn, SSH_AUTH_KEY_INIT); + rc = 0; /* clear rc and continue */ + } + else { + state(conn, SSH_AUTH_AGENT_LIST); + } + } + else +#endif /* HAVE_LIBSSH2_AGENT_API */ + state(conn, SSH_AUTH_KEY_INIT); + break; + + case SSH_AUTH_AGENT_LIST: +#ifdef HAVE_LIBSSH2_AGENT_API + rc = libssh2_agent_list_identities(sshc->ssh_agent); + + if(rc == LIBSSH2_ERROR_EAGAIN) + break; + if(rc < 0) { + infof(data, "Failure requesting identities to agent\n"); + state(conn, SSH_AUTH_KEY_INIT); + rc = 0; /* clear rc and continue */ + } + else { + state(conn, SSH_AUTH_AGENT); + sshc->sshagent_prev_identity = NULL; + } +#endif + break; + + case SSH_AUTH_AGENT: +#ifdef HAVE_LIBSSH2_AGENT_API + /* as prev_identity evolves only after an identity user auth finished we + can safely request it again as long as EAGAIN is returned here or by + libssh2_agent_userauth */ + rc = libssh2_agent_get_identity(sshc->ssh_agent, + &sshc->sshagent_identity, + sshc->sshagent_prev_identity); + if(rc == LIBSSH2_ERROR_EAGAIN) + break; + + if(rc == 0) { + rc = libssh2_agent_userauth(sshc->ssh_agent, conn->user, + sshc->sshagent_identity); + + if(rc < 0) { + if(rc != LIBSSH2_ERROR_EAGAIN) { + /* tried and failed? go to next identity */ + sshc->sshagent_prev_identity = sshc->sshagent_identity; + } + break; + } + } + + if(rc < 0) + infof(data, "Failure requesting identities to agent\n"); + else if(rc == 1) + infof(data, "No identity would match\n"); + + if(rc == LIBSSH2_ERROR_NONE) { + sshc->authed = TRUE; + infof(data, "Agent based authentication successful\n"); + state(conn, SSH_AUTH_DONE); + } + else { + state(conn, SSH_AUTH_KEY_INIT); + rc = 0; /* clear rc and continue */ + } +#endif + break; + + case SSH_AUTH_KEY_INIT: + if((data->set.ssh_auth_types & CURLSSH_AUTH_KEYBOARD) + && (strstr(sshc->authlist, "keyboard-interactive") != NULL)) { + state(conn, SSH_AUTH_KEY); + } + else { + state(conn, SSH_AUTH_DONE); + } + break; + + case SSH_AUTH_KEY: + /* Authentication failed. Continue with keyboard-interactive now. */ + rc = libssh2_userauth_keyboard_interactive_ex(sshc->ssh_session, + conn->user, + curlx_uztoui( + strlen(conn->user)), + &kbd_callback); + if(rc == LIBSSH2_ERROR_EAGAIN) { + break; + } + if(rc == 0) { + sshc->authed = TRUE; + infof(data, "Initialized keyboard interactive authentication\n"); + } + state(conn, SSH_AUTH_DONE); + break; + + case SSH_AUTH_DONE: + if(!sshc->authed) { + failf(data, "Authentication failure"); + state(conn, SSH_SESSION_FREE); + sshc->actualcode = CURLE_LOGIN_DENIED; + break; + } + + /* + * At this point we have an authenticated ssh session. + */ + infof(data, "Authentication complete\n"); + + Curl_pgrsTime(conn->data, TIMER_APPCONNECT); /* SSH is connected */ + + conn->sockfd = sock; + conn->writesockfd = CURL_SOCKET_BAD; + + if(conn->handler->protocol == CURLPROTO_SFTP) { + state(conn, SSH_SFTP_INIT); + break; + } + infof(data, "SSH CONNECT phase done\n"); + state(conn, SSH_STOP); + break; + + case SSH_SFTP_INIT: + /* + * Start the libssh2 sftp session + */ + sshc->sftp_session = libssh2_sftp_init(sshc->ssh_session); + if(!sshc->sftp_session) { + char *err_msg = NULL; + if(libssh2_session_last_errno(sshc->ssh_session) == + LIBSSH2_ERROR_EAGAIN) { + rc = LIBSSH2_ERROR_EAGAIN; + break; + } + + (void)libssh2_session_last_error(sshc->ssh_session, + &err_msg, NULL, 0); + failf(data, "Failure initializing sftp session: %s", err_msg); + state(conn, SSH_SESSION_FREE); + sshc->actualcode = CURLE_FAILED_INIT; + break; + } + state(conn, SSH_SFTP_REALPATH); + break; + + case SSH_SFTP_REALPATH: + { + char tempHome[PATH_MAX]; + + /* + * Get the "home" directory + */ + rc = sftp_libssh2_realpath(sshc->sftp_session, ".", + tempHome, PATH_MAX-1); + if(rc == LIBSSH2_ERROR_EAGAIN) { + break; + } + if(rc > 0) { + /* It seems that this string is not always NULL terminated */ + tempHome[rc] = '\0'; + sshc->homedir = strdup(tempHome); + if(!sshc->homedir) { + state(conn, SSH_SFTP_CLOSE); + sshc->actualcode = CURLE_OUT_OF_MEMORY; + break; + } + conn->data->state.most_recent_ftp_entrypath = sshc->homedir; + } + else { + /* Return the error type */ + err = sftp_libssh2_last_error(sshc->sftp_session); + if(err) + result = sftp_libssh2_error_to_CURLE(err); + else + /* in this case, the error wasn't in the SFTP level but for example + a time-out or similar */ + result = CURLE_SSH; + sshc->actualcode = result; + DEBUGF(infof(data, "error = %d makes libcurl = %d\n", + err, (int)result)); + state(conn, SSH_STOP); + break; + } + } + /* This is the last step in the SFTP connect phase. Do note that while + we get the homedir here, we get the "workingpath" in the DO action + since the homedir will remain the same between request but the + working path will not. */ + DEBUGF(infof(data, "SSH CONNECT phase done\n")); + state(conn, SSH_STOP); + break; + + case SSH_SFTP_QUOTE_INIT: + + result = Curl_getworkingpath(conn, sshc->homedir, &sftp_scp->path); + if(result) { + sshc->actualcode = result; + state(conn, SSH_STOP); + break; + } + + if(data->set.quote) { + infof(data, "Sending quote commands\n"); + sshc->quote_item = data->set.quote; + state(conn, SSH_SFTP_QUOTE); + } + else { + state(conn, SSH_SFTP_GETINFO); + } + break; + + case SSH_SFTP_POSTQUOTE_INIT: + if(data->set.postquote) { + infof(data, "Sending quote commands\n"); + sshc->quote_item = data->set.postquote; + state(conn, SSH_SFTP_QUOTE); + } + else { + state(conn, SSH_STOP); + } + break; + + case SSH_SFTP_QUOTE: + /* Send any quote commands */ + { + const char *cp; + + /* + * Support some of the "FTP" commands + * + * 'sshc->quote_item' is already verified to be non-NULL before it + * switched to this state. + */ + char *cmd = sshc->quote_item->data; + sshc->acceptfail = FALSE; + + /* if a command starts with an asterisk, which a legal SFTP command never + can, the command will be allowed to fail without it causing any + aborts or cancels etc. It will cause libcurl to act as if the command + is successful, whatever the server reponds. */ + + if(cmd[0] == '*') { + cmd++; + sshc->acceptfail = TRUE; + } + + if(strcasecompare("pwd", cmd)) { + /* output debug output if that is requested */ + char *tmp = aprintf("257 \"%s\" is current directory.\n", + sftp_scp->path); + if(!tmp) { + result = CURLE_OUT_OF_MEMORY; + state(conn, SSH_SFTP_CLOSE); + sshc->nextstate = SSH_NO_STATE; + break; + } + if(data->set.verbose) { + Curl_debug(data, CURLINFO_HEADER_OUT, (char *)"PWD\n", 4, conn); + Curl_debug(data, CURLINFO_HEADER_IN, tmp, strlen(tmp), conn); + } + /* this sends an FTP-like "header" to the header callback so that the + current directory can be read very similar to how it is read when + using ordinary FTP. */ + result = Curl_client_write(conn, CLIENTWRITE_HEADER, tmp, strlen(tmp)); + free(tmp); + if(result) { + state(conn, SSH_SFTP_CLOSE); + sshc->nextstate = SSH_NO_STATE; + sshc->actualcode = result; + } + else + state(conn, SSH_SFTP_NEXT_QUOTE); + break; + } + { + /* + * the arguments following the command must be separated from the + * command with a space so we can check for it unconditionally + */ + cp = strchr(cmd, ' '); + if(cp == NULL) { + failf(data, "Syntax error in SFTP command. Supply parameter(s)!"); + state(conn, SSH_SFTP_CLOSE); + sshc->nextstate = SSH_NO_STATE; + sshc->actualcode = CURLE_QUOTE_ERROR; + break; + } + + /* + * also, every command takes at least one argument so we get that + * first argument right now + */ + result = Curl_get_pathname(&cp, &sshc->quote_path1, sshc->homedir); + if(result) { + if(result == CURLE_OUT_OF_MEMORY) + failf(data, "Out of memory"); + else + failf(data, "Syntax error: Bad first parameter"); + state(conn, SSH_SFTP_CLOSE); + sshc->nextstate = SSH_NO_STATE; + sshc->actualcode = result; + break; + } + + /* + * SFTP is a binary protocol, so we don't send text commands + * to the server. Instead, we scan for commands used by + * OpenSSH's sftp program and call the appropriate libssh2 + * functions. + */ + if(strncasecompare(cmd, "chgrp ", 6) || + strncasecompare(cmd, "chmod ", 6) || + strncasecompare(cmd, "chown ", 6) ) { + /* attribute change */ + + /* sshc->quote_path1 contains the mode to set */ + /* get the destination */ + result = Curl_get_pathname(&cp, &sshc->quote_path2, sshc->homedir); + if(result) { + if(result == CURLE_OUT_OF_MEMORY) + failf(data, "Out of memory"); + else + failf(data, "Syntax error in chgrp/chmod/chown: " + "Bad second parameter"); + Curl_safefree(sshc->quote_path1); + state(conn, SSH_SFTP_CLOSE); + sshc->nextstate = SSH_NO_STATE; + sshc->actualcode = result; + break; + } + memset(&sshc->quote_attrs, 0, sizeof(LIBSSH2_SFTP_ATTRIBUTES)); + state(conn, SSH_SFTP_QUOTE_STAT); + break; + } + if(strncasecompare(cmd, "ln ", 3) || + strncasecompare(cmd, "symlink ", 8)) { + /* symbolic linking */ + /* sshc->quote_path1 is the source */ + /* get the destination */ + result = Curl_get_pathname(&cp, &sshc->quote_path2, sshc->homedir); + if(result) { + if(result == CURLE_OUT_OF_MEMORY) + failf(data, "Out of memory"); + else + failf(data, + "Syntax error in ln/symlink: Bad second parameter"); + Curl_safefree(sshc->quote_path1); + state(conn, SSH_SFTP_CLOSE); + sshc->nextstate = SSH_NO_STATE; + sshc->actualcode = result; + break; + } + state(conn, SSH_SFTP_QUOTE_SYMLINK); + break; + } + else if(strncasecompare(cmd, "mkdir ", 6)) { + /* create dir */ + state(conn, SSH_SFTP_QUOTE_MKDIR); + break; + } + else if(strncasecompare(cmd, "rename ", 7)) { + /* rename file */ + /* first param is the source path */ + /* second param is the dest. path */ + result = Curl_get_pathname(&cp, &sshc->quote_path2, sshc->homedir); + if(result) { + if(result == CURLE_OUT_OF_MEMORY) + failf(data, "Out of memory"); + else + failf(data, "Syntax error in rename: Bad second parameter"); + Curl_safefree(sshc->quote_path1); + state(conn, SSH_SFTP_CLOSE); + sshc->nextstate = SSH_NO_STATE; + sshc->actualcode = result; + break; + } + state(conn, SSH_SFTP_QUOTE_RENAME); + break; + } + else if(strncasecompare(cmd, "rmdir ", 6)) { + /* delete dir */ + state(conn, SSH_SFTP_QUOTE_RMDIR); + break; + } + else if(strncasecompare(cmd, "rm ", 3)) { + state(conn, SSH_SFTP_QUOTE_UNLINK); + break; + } +#ifdef HAS_STATVFS_SUPPORT + else if(strncasecompare(cmd, "statvfs ", 8)) { + state(conn, SSH_SFTP_QUOTE_STATVFS); + break; + } +#endif + + failf(data, "Unknown SFTP command"); + Curl_safefree(sshc->quote_path1); + Curl_safefree(sshc->quote_path2); + state(conn, SSH_SFTP_CLOSE); + sshc->nextstate = SSH_NO_STATE; + sshc->actualcode = CURLE_QUOTE_ERROR; + break; + } + } + break; + + case SSH_SFTP_NEXT_QUOTE: + Curl_safefree(sshc->quote_path1); + Curl_safefree(sshc->quote_path2); + + sshc->quote_item = sshc->quote_item->next; + + if(sshc->quote_item) { + state(conn, SSH_SFTP_QUOTE); + } + else { + if(sshc->nextstate != SSH_NO_STATE) { + state(conn, sshc->nextstate); + sshc->nextstate = SSH_NO_STATE; + } + else { + state(conn, SSH_SFTP_GETINFO); + } + } + break; + + case SSH_SFTP_QUOTE_STAT: + { + char *cmd = sshc->quote_item->data; + sshc->acceptfail = FALSE; + + /* if a command starts with an asterisk, which a legal SFTP command never + can, the command will be allowed to fail without it causing any + aborts or cancels etc. It will cause libcurl to act as if the command + is successful, whatever the server reponds. */ + + if(cmd[0] == '*') { + cmd++; + sshc->acceptfail = TRUE; + } + + if(!strncasecompare(cmd, "chmod", 5)) { + /* Since chown and chgrp only set owner OR group but libssh2 wants to + * set them both at once, we need to obtain the current ownership + * first. This takes an extra protocol round trip. + */ + rc = libssh2_sftp_stat_ex(sshc->sftp_session, sshc->quote_path2, + curlx_uztoui(strlen(sshc->quote_path2)), + LIBSSH2_SFTP_STAT, + &sshc->quote_attrs); + if(rc == LIBSSH2_ERROR_EAGAIN) { + break; + } + if(rc != 0 && !sshc->acceptfail) { /* get those attributes */ + err = sftp_libssh2_last_error(sshc->sftp_session); + Curl_safefree(sshc->quote_path1); + Curl_safefree(sshc->quote_path2); + failf(data, "Attempt to get SFTP stats failed: %s", + sftp_libssh2_strerror(err)); + state(conn, SSH_SFTP_CLOSE); + sshc->nextstate = SSH_NO_STATE; + sshc->actualcode = CURLE_QUOTE_ERROR; + break; + } + } + + /* Now set the new attributes... */ + if(strncasecompare(cmd, "chgrp", 5)) { + sshc->quote_attrs.gid = strtoul(sshc->quote_path1, NULL, 10); + sshc->quote_attrs.flags = LIBSSH2_SFTP_ATTR_UIDGID; + if(sshc->quote_attrs.gid == 0 && !ISDIGIT(sshc->quote_path1[0]) && + !sshc->acceptfail) { + Curl_safefree(sshc->quote_path1); + Curl_safefree(sshc->quote_path2); + failf(data, "Syntax error: chgrp gid not a number"); + state(conn, SSH_SFTP_CLOSE); + sshc->nextstate = SSH_NO_STATE; + sshc->actualcode = CURLE_QUOTE_ERROR; + break; + } + } + else if(strncasecompare(cmd, "chmod", 5)) { + sshc->quote_attrs.permissions = strtoul(sshc->quote_path1, NULL, 8); + sshc->quote_attrs.flags = LIBSSH2_SFTP_ATTR_PERMISSIONS; + /* permissions are octal */ + if(sshc->quote_attrs.permissions == 0 && + !ISDIGIT(sshc->quote_path1[0])) { + Curl_safefree(sshc->quote_path1); + Curl_safefree(sshc->quote_path2); + failf(data, "Syntax error: chmod permissions not a number"); + state(conn, SSH_SFTP_CLOSE); + sshc->nextstate = SSH_NO_STATE; + sshc->actualcode = CURLE_QUOTE_ERROR; + break; + } + } + else if(strncasecompare(cmd, "chown", 5)) { + sshc->quote_attrs.uid = strtoul(sshc->quote_path1, NULL, 10); + sshc->quote_attrs.flags = LIBSSH2_SFTP_ATTR_UIDGID; + if(sshc->quote_attrs.uid == 0 && !ISDIGIT(sshc->quote_path1[0]) && + !sshc->acceptfail) { + Curl_safefree(sshc->quote_path1); + Curl_safefree(sshc->quote_path2); + failf(data, "Syntax error: chown uid not a number"); + state(conn, SSH_SFTP_CLOSE); + sshc->nextstate = SSH_NO_STATE; + sshc->actualcode = CURLE_QUOTE_ERROR; + break; + } + } + + /* Now send the completed structure... */ + state(conn, SSH_SFTP_QUOTE_SETSTAT); + break; + } + + case SSH_SFTP_QUOTE_SETSTAT: + rc = libssh2_sftp_stat_ex(sshc->sftp_session, sshc->quote_path2, + curlx_uztoui(strlen(sshc->quote_path2)), + LIBSSH2_SFTP_SETSTAT, + &sshc->quote_attrs); + if(rc == LIBSSH2_ERROR_EAGAIN) { + break; + } + if(rc != 0 && !sshc->acceptfail) { + err = sftp_libssh2_last_error(sshc->sftp_session); + Curl_safefree(sshc->quote_path1); + Curl_safefree(sshc->quote_path2); + failf(data, "Attempt to set SFTP stats failed: %s", + sftp_libssh2_strerror(err)); + state(conn, SSH_SFTP_CLOSE); + sshc->nextstate = SSH_NO_STATE; + sshc->actualcode = CURLE_QUOTE_ERROR; + break; + } + state(conn, SSH_SFTP_NEXT_QUOTE); + break; + + case SSH_SFTP_QUOTE_SYMLINK: + rc = libssh2_sftp_symlink_ex(sshc->sftp_session, sshc->quote_path1, + curlx_uztoui(strlen(sshc->quote_path1)), + sshc->quote_path2, + curlx_uztoui(strlen(sshc->quote_path2)), + LIBSSH2_SFTP_SYMLINK); + if(rc == LIBSSH2_ERROR_EAGAIN) { + break; + } + if(rc != 0 && !sshc->acceptfail) { + err = sftp_libssh2_last_error(sshc->sftp_session); + Curl_safefree(sshc->quote_path1); + Curl_safefree(sshc->quote_path2); + failf(data, "symlink command failed: %s", + sftp_libssh2_strerror(err)); + state(conn, SSH_SFTP_CLOSE); + sshc->nextstate = SSH_NO_STATE; + sshc->actualcode = CURLE_QUOTE_ERROR; + break; + } + state(conn, SSH_SFTP_NEXT_QUOTE); + break; + + case SSH_SFTP_QUOTE_MKDIR: + rc = libssh2_sftp_mkdir_ex(sshc->sftp_session, sshc->quote_path1, + curlx_uztoui(strlen(sshc->quote_path1)), + data->set.new_directory_perms); + if(rc == LIBSSH2_ERROR_EAGAIN) { + break; + } + if(rc != 0 && !sshc->acceptfail) { + err = sftp_libssh2_last_error(sshc->sftp_session); + Curl_safefree(sshc->quote_path1); + failf(data, "mkdir command failed: %s", sftp_libssh2_strerror(err)); + state(conn, SSH_SFTP_CLOSE); + sshc->nextstate = SSH_NO_STATE; + sshc->actualcode = CURLE_QUOTE_ERROR; + break; + } + state(conn, SSH_SFTP_NEXT_QUOTE); + break; + + case SSH_SFTP_QUOTE_RENAME: + rc = libssh2_sftp_rename_ex(sshc->sftp_session, sshc->quote_path1, + curlx_uztoui(strlen(sshc->quote_path1)), + sshc->quote_path2, + curlx_uztoui(strlen(sshc->quote_path2)), + LIBSSH2_SFTP_RENAME_OVERWRITE | + LIBSSH2_SFTP_RENAME_ATOMIC | + LIBSSH2_SFTP_RENAME_NATIVE); + + if(rc == LIBSSH2_ERROR_EAGAIN) { + break; + } + if(rc != 0 && !sshc->acceptfail) { + err = sftp_libssh2_last_error(sshc->sftp_session); + Curl_safefree(sshc->quote_path1); + Curl_safefree(sshc->quote_path2); + failf(data, "rename command failed: %s", sftp_libssh2_strerror(err)); + state(conn, SSH_SFTP_CLOSE); + sshc->nextstate = SSH_NO_STATE; + sshc->actualcode = CURLE_QUOTE_ERROR; + break; + } + state(conn, SSH_SFTP_NEXT_QUOTE); + break; + + case SSH_SFTP_QUOTE_RMDIR: + rc = libssh2_sftp_rmdir_ex(sshc->sftp_session, sshc->quote_path1, + curlx_uztoui(strlen(sshc->quote_path1))); + if(rc == LIBSSH2_ERROR_EAGAIN) { + break; + } + if(rc != 0 && !sshc->acceptfail) { + err = sftp_libssh2_last_error(sshc->sftp_session); + Curl_safefree(sshc->quote_path1); + failf(data, "rmdir command failed: %s", sftp_libssh2_strerror(err)); + state(conn, SSH_SFTP_CLOSE); + sshc->nextstate = SSH_NO_STATE; + sshc->actualcode = CURLE_QUOTE_ERROR; + break; + } + state(conn, SSH_SFTP_NEXT_QUOTE); + break; + + case SSH_SFTP_QUOTE_UNLINK: + rc = libssh2_sftp_unlink_ex(sshc->sftp_session, sshc->quote_path1, + curlx_uztoui(strlen(sshc->quote_path1))); + if(rc == LIBSSH2_ERROR_EAGAIN) { + break; + } + if(rc != 0 && !sshc->acceptfail) { + err = sftp_libssh2_last_error(sshc->sftp_session); + Curl_safefree(sshc->quote_path1); + failf(data, "rm command failed: %s", sftp_libssh2_strerror(err)); + state(conn, SSH_SFTP_CLOSE); + sshc->nextstate = SSH_NO_STATE; + sshc->actualcode = CURLE_QUOTE_ERROR; + break; + } + state(conn, SSH_SFTP_NEXT_QUOTE); + break; + +#ifdef HAS_STATVFS_SUPPORT + case SSH_SFTP_QUOTE_STATVFS: + { + LIBSSH2_SFTP_STATVFS statvfs; + rc = libssh2_sftp_statvfs(sshc->sftp_session, sshc->quote_path1, + curlx_uztoui(strlen(sshc->quote_path1)), + &statvfs); + + if(rc == LIBSSH2_ERROR_EAGAIN) { + break; + } + if(rc != 0 && !sshc->acceptfail) { + err = sftp_libssh2_last_error(sshc->sftp_session); + Curl_safefree(sshc->quote_path1); + failf(data, "statvfs command failed: %s", sftp_libssh2_strerror(err)); + state(conn, SSH_SFTP_CLOSE); + sshc->nextstate = SSH_NO_STATE; + sshc->actualcode = CURLE_QUOTE_ERROR; + break; + } + else if(rc == 0) { + char *tmp = aprintf("statvfs:\n" + "f_bsize: %llu\n" "f_frsize: %llu\n" + "f_blocks: %llu\n" "f_bfree: %llu\n" + "f_bavail: %llu\n" "f_files: %llu\n" + "f_ffree: %llu\n" "f_favail: %llu\n" + "f_fsid: %llu\n" "f_flag: %llu\n" + "f_namemax: %llu\n", + statvfs.f_bsize, statvfs.f_frsize, + statvfs.f_blocks, statvfs.f_bfree, + statvfs.f_bavail, statvfs.f_files, + statvfs.f_ffree, statvfs.f_favail, + statvfs.f_fsid, statvfs.f_flag, + statvfs.f_namemax); + if(!tmp) { + result = CURLE_OUT_OF_MEMORY; + state(conn, SSH_SFTP_CLOSE); + sshc->nextstate = SSH_NO_STATE; + break; + } + + result = Curl_client_write(conn, CLIENTWRITE_HEADER, tmp, strlen(tmp)); + free(tmp); + if(result) { + state(conn, SSH_SFTP_CLOSE); + sshc->nextstate = SSH_NO_STATE; + sshc->actualcode = result; + } + } + state(conn, SSH_SFTP_NEXT_QUOTE); + break; + } +#endif + case SSH_SFTP_GETINFO: + { + if(data->set.get_filetime) { + state(conn, SSH_SFTP_FILETIME); + } + else { + state(conn, SSH_SFTP_TRANS_INIT); + } + break; + } + + case SSH_SFTP_FILETIME: + { + LIBSSH2_SFTP_ATTRIBUTES attrs; + + rc = libssh2_sftp_stat_ex(sshc->sftp_session, sftp_scp->path, + curlx_uztoui(strlen(sftp_scp->path)), + LIBSSH2_SFTP_STAT, &attrs); + if(rc == LIBSSH2_ERROR_EAGAIN) { + break; + } + if(rc == 0) { + data->info.filetime = attrs.mtime; + } + + state(conn, SSH_SFTP_TRANS_INIT); + break; + } + + case SSH_SFTP_TRANS_INIT: + if(data->set.upload) + state(conn, SSH_SFTP_UPLOAD_INIT); + else { + if(sftp_scp->path[strlen(sftp_scp->path)-1] == '/') + state(conn, SSH_SFTP_READDIR_INIT); + else + state(conn, SSH_SFTP_DOWNLOAD_INIT); + } + break; + + case SSH_SFTP_UPLOAD_INIT: + { + unsigned long flags; + /* + * NOTE!!! libssh2 requires that the destination path is a full path + * that includes the destination file and name OR ends in a "/" + * If this is not done the destination file will be named the + * same name as the last directory in the path. + */ + + if(data->state.resume_from != 0) { + LIBSSH2_SFTP_ATTRIBUTES attrs; + if(data->state.resume_from < 0) { + rc = libssh2_sftp_stat_ex(sshc->sftp_session, sftp_scp->path, + curlx_uztoui(strlen(sftp_scp->path)), + LIBSSH2_SFTP_STAT, &attrs); + if(rc == LIBSSH2_ERROR_EAGAIN) { + break; + } + if(rc) { + data->state.resume_from = 0; + } + else { + curl_off_t size = attrs.filesize; + if(size < 0) { + failf(data, "Bad file size (%" CURL_FORMAT_CURL_OFF_T ")", size); + return CURLE_BAD_DOWNLOAD_RESUME; + } + data->state.resume_from = attrs.filesize; + } + } + } + + if(data->set.ftp_append) + /* Try to open for append, but create if nonexisting */ + flags = LIBSSH2_FXF_WRITE|LIBSSH2_FXF_CREAT|LIBSSH2_FXF_APPEND; + else if(data->state.resume_from > 0) + /* If we have restart position then open for append */ + flags = LIBSSH2_FXF_WRITE|LIBSSH2_FXF_APPEND; + else + /* Clear file before writing (normal behaviour) */ + flags = LIBSSH2_FXF_WRITE|LIBSSH2_FXF_CREAT|LIBSSH2_FXF_TRUNC; + + sshc->sftp_handle = + libssh2_sftp_open_ex(sshc->sftp_session, sftp_scp->path, + curlx_uztoui(strlen(sftp_scp->path)), + flags, data->set.new_file_perms, + LIBSSH2_SFTP_OPENFILE); + + if(!sshc->sftp_handle) { + rc = libssh2_session_last_errno(sshc->ssh_session); + + if(LIBSSH2_ERROR_EAGAIN == rc) + break; + + if(LIBSSH2_ERROR_SFTP_PROTOCOL == rc) + /* only when there was an SFTP protocol error can we extract + the sftp error! */ + err = sftp_libssh2_last_error(sshc->sftp_session); + else + err = -1; /* not an sftp error at all */ + + if(sshc->secondCreateDirs) { + state(conn, SSH_SFTP_CLOSE); + sshc->actualcode = err>= LIBSSH2_FX_OK? + sftp_libssh2_error_to_CURLE(err):CURLE_SSH; + failf(data, "Creating the dir/file failed: %s", + sftp_libssh2_strerror(err)); + break; + } + if(((err == LIBSSH2_FX_NO_SUCH_FILE) || + (err == LIBSSH2_FX_FAILURE) || + (err == LIBSSH2_FX_NO_SUCH_PATH)) && + (data->set.ftp_create_missing_dirs && + (strlen(sftp_scp->path) > 1))) { + /* try to create the path remotely */ + rc = 0; /* clear rc and continue */ + sshc->secondCreateDirs = 1; + state(conn, SSH_SFTP_CREATE_DIRS_INIT); + break; + } + state(conn, SSH_SFTP_CLOSE); + sshc->actualcode = err>= LIBSSH2_FX_OK? + sftp_libssh2_error_to_CURLE(err):CURLE_SSH; + if(!sshc->actualcode) { + /* Sometimes, for some reason libssh2_sftp_last_error() returns + zero even though libssh2_sftp_open() failed previously! We need + to work around that! */ + sshc->actualcode = CURLE_SSH; + err = -1; + } + failf(data, "Upload failed: %s (%d/%d)", + err>= LIBSSH2_FX_OK?sftp_libssh2_strerror(err):"ssh error", + err, rc); + break; + } + + /* If we have a restart point then we need to seek to the correct + position. */ + if(data->state.resume_from > 0) { + /* Let's read off the proper amount of bytes from the input. */ + if(conn->seek_func) { + Curl_set_in_callback(data, true); + seekerr = conn->seek_func(conn->seek_client, data->state.resume_from, + SEEK_SET); + Curl_set_in_callback(data, false); + } + + if(seekerr != CURL_SEEKFUNC_OK) { + curl_off_t passed = 0; + + if(seekerr != CURL_SEEKFUNC_CANTSEEK) { + failf(data, "Could not seek stream"); + return CURLE_FTP_COULDNT_USE_REST; + } + /* seekerr == CURL_SEEKFUNC_CANTSEEK (can't seek to offset) */ + do { + size_t readthisamountnow = + (data->state.resume_from - passed > data->set.buffer_size) ? + (size_t)data->set.buffer_size : + curlx_sotouz(data->state.resume_from - passed); + + size_t actuallyread; + Curl_set_in_callback(data, true); + actuallyread = data->state.fread_func(data->state.buffer, 1, + readthisamountnow, + data->state.in); + Curl_set_in_callback(data, false); + + passed += actuallyread; + if((actuallyread == 0) || (actuallyread > readthisamountnow)) { + /* this checks for greater-than only to make sure that the + CURL_READFUNC_ABORT return code still aborts */ + failf(data, "Failed to read data"); + return CURLE_FTP_COULDNT_USE_REST; + } + } while(passed < data->state.resume_from); + } + + /* now, decrease the size of the read */ + if(data->state.infilesize > 0) { + data->state.infilesize -= data->state.resume_from; + data->req.size = data->state.infilesize; + Curl_pgrsSetUploadSize(data, data->state.infilesize); + } + + SFTP_SEEK(sshc->sftp_handle, data->state.resume_from); + } + if(data->state.infilesize > 0) { + data->req.size = data->state.infilesize; + Curl_pgrsSetUploadSize(data, data->state.infilesize); + } + /* upload data */ + Curl_setup_transfer(conn, -1, -1, FALSE, NULL, FIRSTSOCKET, NULL); + + /* not set by Curl_setup_transfer to preserve keepon bits */ + conn->sockfd = conn->writesockfd; + + if(result) { + state(conn, SSH_SFTP_CLOSE); + sshc->actualcode = result; + } + else { + /* store this original bitmask setup to use later on if we can't + figure out a "real" bitmask */ + sshc->orig_waitfor = data->req.keepon; + + /* we want to use the _sending_ function even when the socket turns + out readable as the underlying libssh2 sftp send function will deal + with both accordingly */ + conn->cselect_bits = CURL_CSELECT_OUT; + + /* since we don't really wait for anything at this point, we want the + state machine to move on as soon as possible so we set a very short + timeout here */ + Curl_expire(data, 0, EXPIRE_RUN_NOW); + + state(conn, SSH_STOP); + } + break; + } + + case SSH_SFTP_CREATE_DIRS_INIT: + if(strlen(sftp_scp->path) > 1) { + sshc->slash_pos = sftp_scp->path + 1; /* ignore the leading '/' */ + state(conn, SSH_SFTP_CREATE_DIRS); + } + else { + state(conn, SSH_SFTP_UPLOAD_INIT); + } + break; + + case SSH_SFTP_CREATE_DIRS: + sshc->slash_pos = strchr(sshc->slash_pos, '/'); + if(sshc->slash_pos) { + *sshc->slash_pos = 0; + + infof(data, "Creating directory '%s'\n", sftp_scp->path); + state(conn, SSH_SFTP_CREATE_DIRS_MKDIR); + break; + } + state(conn, SSH_SFTP_UPLOAD_INIT); + break; + + case SSH_SFTP_CREATE_DIRS_MKDIR: + /* 'mode' - parameter is preliminary - default to 0644 */ + rc = libssh2_sftp_mkdir_ex(sshc->sftp_session, sftp_scp->path, + curlx_uztoui(strlen(sftp_scp->path)), + data->set.new_directory_perms); + if(rc == LIBSSH2_ERROR_EAGAIN) { + break; + } + *sshc->slash_pos = '/'; + ++sshc->slash_pos; + if(rc < 0) { + /* + * Abort if failure wasn't that the dir already exists or the + * permission was denied (creation might succeed further down the + * path) - retry on unspecific FAILURE also + */ + err = sftp_libssh2_last_error(sshc->sftp_session); + if((err != LIBSSH2_FX_FILE_ALREADY_EXISTS) && + (err != LIBSSH2_FX_FAILURE) && + (err != LIBSSH2_FX_PERMISSION_DENIED)) { + result = sftp_libssh2_error_to_CURLE(err); + state(conn, SSH_SFTP_CLOSE); + sshc->actualcode = result?result:CURLE_SSH; + break; + } + rc = 0; /* clear rc and continue */ + } + state(conn, SSH_SFTP_CREATE_DIRS); + break; + + case SSH_SFTP_READDIR_INIT: + Curl_pgrsSetDownloadSize(data, -1); + if(data->set.opt_no_body) { + state(conn, SSH_STOP); + break; + } + + /* + * This is a directory that we are trying to get, so produce a directory + * listing + */ + sshc->sftp_handle = libssh2_sftp_open_ex(sshc->sftp_session, + sftp_scp->path, + curlx_uztoui( + strlen(sftp_scp->path)), + 0, 0, LIBSSH2_SFTP_OPENDIR); + if(!sshc->sftp_handle) { + if(libssh2_session_last_errno(sshc->ssh_session) == + LIBSSH2_ERROR_EAGAIN) { + rc = LIBSSH2_ERROR_EAGAIN; + break; + } + err = sftp_libssh2_last_error(sshc->sftp_session); + failf(data, "Could not open directory for reading: %s", + sftp_libssh2_strerror(err)); + state(conn, SSH_SFTP_CLOSE); + result = sftp_libssh2_error_to_CURLE(err); + sshc->actualcode = result?result:CURLE_SSH; + break; + } + sshc->readdir_filename = malloc(PATH_MAX + 1); + if(!sshc->readdir_filename) { + state(conn, SSH_SFTP_CLOSE); + sshc->actualcode = CURLE_OUT_OF_MEMORY; + break; + } + sshc->readdir_longentry = malloc(PATH_MAX + 1); + if(!sshc->readdir_longentry) { + Curl_safefree(sshc->readdir_filename); + state(conn, SSH_SFTP_CLOSE); + sshc->actualcode = CURLE_OUT_OF_MEMORY; + break; + } + state(conn, SSH_SFTP_READDIR); + break; + + case SSH_SFTP_READDIR: + sshc->readdir_len = libssh2_sftp_readdir_ex(sshc->sftp_handle, + sshc->readdir_filename, + PATH_MAX, + sshc->readdir_longentry, + PATH_MAX, + &sshc->readdir_attrs); + if(sshc->readdir_len == LIBSSH2_ERROR_EAGAIN) { + rc = LIBSSH2_ERROR_EAGAIN; + break; + } + if(sshc->readdir_len > 0) { + sshc->readdir_filename[sshc->readdir_len] = '\0'; + + if(data->set.ftp_list_only) { + char *tmpLine; + + tmpLine = aprintf("%s\n", sshc->readdir_filename); + if(tmpLine == NULL) { + state(conn, SSH_SFTP_CLOSE); + sshc->actualcode = CURLE_OUT_OF_MEMORY; + break; + } + result = Curl_client_write(conn, CLIENTWRITE_BODY, + tmpLine, sshc->readdir_len + 1); + free(tmpLine); + + if(result) { + state(conn, SSH_STOP); + break; + } + /* since this counts what we send to the client, we include the + newline in this counter */ + data->req.bytecount += sshc->readdir_len + 1; + + /* output debug output if that is requested */ + if(data->set.verbose) { + Curl_debug(data, CURLINFO_DATA_OUT, sshc->readdir_filename, + sshc->readdir_len, conn); + } + } + else { + sshc->readdir_currLen = (int)strlen(sshc->readdir_longentry); + sshc->readdir_totalLen = 80 + sshc->readdir_currLen; + sshc->readdir_line = calloc(sshc->readdir_totalLen, 1); + if(!sshc->readdir_line) { + Curl_safefree(sshc->readdir_filename); + Curl_safefree(sshc->readdir_longentry); + state(conn, SSH_SFTP_CLOSE); + sshc->actualcode = CURLE_OUT_OF_MEMORY; + break; + } + + memcpy(sshc->readdir_line, sshc->readdir_longentry, + sshc->readdir_currLen); + if((sshc->readdir_attrs.flags & LIBSSH2_SFTP_ATTR_PERMISSIONS) && + ((sshc->readdir_attrs.permissions & LIBSSH2_SFTP_S_IFMT) == + LIBSSH2_SFTP_S_IFLNK)) { + sshc->readdir_linkPath = malloc(PATH_MAX + 1); + if(sshc->readdir_linkPath == NULL) { + Curl_safefree(sshc->readdir_filename); + Curl_safefree(sshc->readdir_longentry); + state(conn, SSH_SFTP_CLOSE); + sshc->actualcode = CURLE_OUT_OF_MEMORY; + break; + } + + snprintf(sshc->readdir_linkPath, PATH_MAX, "%s%s", sftp_scp->path, + sshc->readdir_filename); + state(conn, SSH_SFTP_READDIR_LINK); + break; + } + state(conn, SSH_SFTP_READDIR_BOTTOM); + break; + } + } + else if(sshc->readdir_len == 0) { + Curl_safefree(sshc->readdir_filename); + Curl_safefree(sshc->readdir_longentry); + state(conn, SSH_SFTP_READDIR_DONE); + break; + } + else if(sshc->readdir_len <= 0) { + err = sftp_libssh2_last_error(sshc->sftp_session); + result = sftp_libssh2_error_to_CURLE(err); + sshc->actualcode = result?result:CURLE_SSH; + failf(data, "Could not open remote file for reading: %s :: %d", + sftp_libssh2_strerror(err), + libssh2_session_last_errno(sshc->ssh_session)); + Curl_safefree(sshc->readdir_filename); + Curl_safefree(sshc->readdir_longentry); + state(conn, SSH_SFTP_CLOSE); + break; + } + break; + + case SSH_SFTP_READDIR_LINK: + sshc->readdir_len = + libssh2_sftp_symlink_ex(sshc->sftp_session, + sshc->readdir_linkPath, + curlx_uztoui(strlen(sshc->readdir_linkPath)), + sshc->readdir_filename, + PATH_MAX, LIBSSH2_SFTP_READLINK); + if(sshc->readdir_len == LIBSSH2_ERROR_EAGAIN) { + rc = LIBSSH2_ERROR_EAGAIN; + break; + } + Curl_safefree(sshc->readdir_linkPath); + + /* get room for the filename and extra output */ + sshc->readdir_totalLen += 4 + sshc->readdir_len; + new_readdir_line = Curl_saferealloc(sshc->readdir_line, + sshc->readdir_totalLen); + if(!new_readdir_line) { + sshc->readdir_line = NULL; + Curl_safefree(sshc->readdir_filename); + Curl_safefree(sshc->readdir_longentry); + state(conn, SSH_SFTP_CLOSE); + sshc->actualcode = CURLE_OUT_OF_MEMORY; + break; + } + sshc->readdir_line = new_readdir_line; + + sshc->readdir_currLen += snprintf(sshc->readdir_line + + sshc->readdir_currLen, + sshc->readdir_totalLen - + sshc->readdir_currLen, + " -> %s", + sshc->readdir_filename); + + state(conn, SSH_SFTP_READDIR_BOTTOM); + break; + + case SSH_SFTP_READDIR_BOTTOM: + sshc->readdir_currLen += snprintf(sshc->readdir_line + + sshc->readdir_currLen, + sshc->readdir_totalLen - + sshc->readdir_currLen, "\n"); + result = Curl_client_write(conn, CLIENTWRITE_BODY, + sshc->readdir_line, + sshc->readdir_currLen); + + if(!result) { + + /* output debug output if that is requested */ + if(data->set.verbose) { + Curl_debug(data, CURLINFO_DATA_OUT, sshc->readdir_line, + sshc->readdir_currLen, conn); + } + data->req.bytecount += sshc->readdir_currLen; + } + Curl_safefree(sshc->readdir_line); + if(result) { + state(conn, SSH_STOP); + } + else + state(conn, SSH_SFTP_READDIR); + break; + + case SSH_SFTP_READDIR_DONE: + if(libssh2_sftp_closedir(sshc->sftp_handle) == + LIBSSH2_ERROR_EAGAIN) { + rc = LIBSSH2_ERROR_EAGAIN; + break; + } + sshc->sftp_handle = NULL; + Curl_safefree(sshc->readdir_filename); + Curl_safefree(sshc->readdir_longentry); + + /* no data to transfer */ + Curl_setup_transfer(conn, -1, -1, FALSE, NULL, -1, NULL); + state(conn, SSH_STOP); + break; + + case SSH_SFTP_DOWNLOAD_INIT: + /* + * Work on getting the specified file + */ + sshc->sftp_handle = + libssh2_sftp_open_ex(sshc->sftp_session, sftp_scp->path, + curlx_uztoui(strlen(sftp_scp->path)), + LIBSSH2_FXF_READ, data->set.new_file_perms, + LIBSSH2_SFTP_OPENFILE); + if(!sshc->sftp_handle) { + if(libssh2_session_last_errno(sshc->ssh_session) == + LIBSSH2_ERROR_EAGAIN) { + rc = LIBSSH2_ERROR_EAGAIN; + break; + } + err = sftp_libssh2_last_error(sshc->sftp_session); + failf(data, "Could not open remote file for reading: %s", + sftp_libssh2_strerror(err)); + state(conn, SSH_SFTP_CLOSE); + result = sftp_libssh2_error_to_CURLE(err); + sshc->actualcode = result?result:CURLE_SSH; + break; + } + state(conn, SSH_SFTP_DOWNLOAD_STAT); + break; + + case SSH_SFTP_DOWNLOAD_STAT: + { + LIBSSH2_SFTP_ATTRIBUTES attrs; + + rc = libssh2_sftp_stat_ex(sshc->sftp_session, sftp_scp->path, + curlx_uztoui(strlen(sftp_scp->path)), + LIBSSH2_SFTP_STAT, &attrs); + if(rc == LIBSSH2_ERROR_EAGAIN) { + break; + } + if(rc || + !(attrs.flags & LIBSSH2_SFTP_ATTR_SIZE) || + (attrs.filesize == 0)) { + /* + * libssh2_sftp_open() didn't return an error, so maybe the server + * just doesn't support stat() + * OR the server doesn't return a file size with a stat() + * OR file size is 0 + */ + data->req.size = -1; + data->req.maxdownload = -1; + Curl_pgrsSetDownloadSize(data, -1); + } + else { + curl_off_t size = attrs.filesize; + + if(size < 0) { + failf(data, "Bad file size (%" CURL_FORMAT_CURL_OFF_T ")", size); + return CURLE_BAD_DOWNLOAD_RESUME; + } + if(conn->data->state.use_range) { + curl_off_t from, to; + char *ptr; + char *ptr2; + CURLofft to_t; + CURLofft from_t; + + from_t = curlx_strtoofft(conn->data->state.range, &ptr, 0, &from); + if(from_t == CURL_OFFT_FLOW) + return CURLE_RANGE_ERROR; + while(*ptr && (ISSPACE(*ptr) || (*ptr == '-'))) + ptr++; + to_t = curlx_strtoofft(ptr, &ptr2, 0, &to); + if(to_t == CURL_OFFT_FLOW) + return CURLE_RANGE_ERROR; + if((to_t == CURL_OFFT_INVAL) /* no "to" value given */ + || (to >= size)) { + to = size - 1; + } + if(from_t) { + /* from is relative to end of file */ + from = size - to; + to = size - 1; + } + if(from > size) { + failf(data, "Offset (%" + CURL_FORMAT_CURL_OFF_T ") was beyond file size (%" + CURL_FORMAT_CURL_OFF_T ")", from, attrs.filesize); + return CURLE_BAD_DOWNLOAD_RESUME; + } + if(from > to) { + from = to; + size = 0; + } + else { + size = to - from + 1; + } + + SFTP_SEEK(conn->proto.sshc.sftp_handle, from); + } + data->req.size = size; + data->req.maxdownload = size; + Curl_pgrsSetDownloadSize(data, size); + } + + /* We can resume if we can seek to the resume position */ + if(data->state.resume_from) { + if(data->state.resume_from < 0) { + /* We're supposed to download the last abs(from) bytes */ + if((curl_off_t)attrs.filesize < -data->state.resume_from) { + failf(data, "Offset (%" + CURL_FORMAT_CURL_OFF_T ") was beyond file size (%" + CURL_FORMAT_CURL_OFF_T ")", + data->state.resume_from, attrs.filesize); + return CURLE_BAD_DOWNLOAD_RESUME; + } + /* download from where? */ + data->state.resume_from += attrs.filesize; + } + else { + if((curl_off_t)attrs.filesize < data->state.resume_from) { + failf(data, "Offset (%" CURL_FORMAT_CURL_OFF_T + ") was beyond file size (%" CURL_FORMAT_CURL_OFF_T ")", + data->state.resume_from, attrs.filesize); + return CURLE_BAD_DOWNLOAD_RESUME; + } + } + /* Does a completed file need to be seeked and started or closed ? */ + /* Now store the number of bytes we are expected to download */ + data->req.size = attrs.filesize - data->state.resume_from; + data->req.maxdownload = attrs.filesize - data->state.resume_from; + Curl_pgrsSetDownloadSize(data, + attrs.filesize - data->state.resume_from); + SFTP_SEEK(sshc->sftp_handle, data->state.resume_from); + } + } + + /* Setup the actual download */ + if(data->req.size == 0) { + /* no data to transfer */ + Curl_setup_transfer(conn, -1, -1, FALSE, NULL, -1, NULL); + infof(data, "File already completely downloaded\n"); + state(conn, SSH_STOP); + break; + } + Curl_setup_transfer(conn, FIRSTSOCKET, data->req.size, + FALSE, NULL, -1, NULL); + + /* not set by Curl_setup_transfer to preserve keepon bits */ + conn->writesockfd = conn->sockfd; + + /* we want to use the _receiving_ function even when the socket turns + out writableable as the underlying libssh2 recv function will deal + with both accordingly */ + conn->cselect_bits = CURL_CSELECT_IN; + + if(result) { + /* this should never occur; the close state should be entered + at the time the error occurs */ + state(conn, SSH_SFTP_CLOSE); + sshc->actualcode = result; + } + else { + state(conn, SSH_STOP); + } + break; + + case SSH_SFTP_CLOSE: + if(sshc->sftp_handle) { + rc = libssh2_sftp_close(sshc->sftp_handle); + if(rc == LIBSSH2_ERROR_EAGAIN) { + break; + } + if(rc < 0) { + char *err_msg = NULL; + (void)libssh2_session_last_error(sshc->ssh_session, + &err_msg, NULL, 0); + infof(data, "Failed to close libssh2 file: %d %s\n", rc, err_msg); + } + sshc->sftp_handle = NULL; + } + + Curl_safefree(sftp_scp->path); + + DEBUGF(infof(data, "SFTP DONE done\n")); + + /* Check if nextstate is set and move .nextstate could be POSTQUOTE_INIT + After nextstate is executed, the control should come back to + SSH_SFTP_CLOSE to pass the correct result back */ + if(sshc->nextstate != SSH_NO_STATE && + sshc->nextstate != SSH_SFTP_CLOSE) { + state(conn, sshc->nextstate); + sshc->nextstate = SSH_SFTP_CLOSE; + } + else { + state(conn, SSH_STOP); + result = sshc->actualcode; + } + break; + + case SSH_SFTP_SHUTDOWN: + /* during times we get here due to a broken transfer and then the + sftp_handle might not have been taken down so make sure that is done + before we proceed */ + + if(sshc->sftp_handle) { + rc = libssh2_sftp_close(sshc->sftp_handle); + if(rc == LIBSSH2_ERROR_EAGAIN) { + break; + } + if(rc < 0) { + char *err_msg = NULL; + (void)libssh2_session_last_error(sshc->ssh_session, &err_msg, + NULL, 0); + infof(data, "Failed to close libssh2 file: %d %s\n", rc, err_msg); + } + sshc->sftp_handle = NULL; + } + if(sshc->sftp_session) { + rc = libssh2_sftp_shutdown(sshc->sftp_session); + if(rc == LIBSSH2_ERROR_EAGAIN) { + break; + } + if(rc < 0) { + infof(data, "Failed to stop libssh2 sftp subsystem\n"); + } + sshc->sftp_session = NULL; + } + + Curl_safefree(sshc->homedir); + conn->data->state.most_recent_ftp_entrypath = NULL; + + state(conn, SSH_SESSION_DISCONNECT); + break; + + case SSH_SCP_TRANS_INIT: + result = Curl_getworkingpath(conn, sshc->homedir, &sftp_scp->path); + if(result) { + sshc->actualcode = result; + state(conn, SSH_STOP); + break; + } + + if(data->set.upload) { + if(data->state.infilesize < 0) { + failf(data, "SCP requires a known file size for upload"); + sshc->actualcode = CURLE_UPLOAD_FAILED; + state(conn, SSH_SCP_CHANNEL_FREE); + break; + } + state(conn, SSH_SCP_UPLOAD_INIT); + } + else { + state(conn, SSH_SCP_DOWNLOAD_INIT); + } + break; + + case SSH_SCP_UPLOAD_INIT: + /* + * libssh2 requires that the destination path is a full path that + * includes the destination file and name OR ends in a "/" . If this is + * not done the destination file will be named the same name as the last + * directory in the path. + */ + sshc->ssh_channel = + SCP_SEND(sshc->ssh_session, sftp_scp->path, data->set.new_file_perms, + data->state.infilesize); + if(!sshc->ssh_channel) { + int ssh_err; + char *err_msg = NULL; + + if(libssh2_session_last_errno(sshc->ssh_session) == + LIBSSH2_ERROR_EAGAIN) { + rc = LIBSSH2_ERROR_EAGAIN; + break; + } + + ssh_err = (int)(libssh2_session_last_error(sshc->ssh_session, + &err_msg, NULL, 0)); + failf(conn->data, "%s", err_msg); + state(conn, SSH_SCP_CHANNEL_FREE); + sshc->actualcode = libssh2_session_error_to_CURLE(ssh_err); + /* Map generic errors to upload failed */ + if(sshc->actualcode == CURLE_SSH || + sshc->actualcode == CURLE_REMOTE_FILE_NOT_FOUND) + sshc->actualcode = CURLE_UPLOAD_FAILED; + break; + } + + /* upload data */ + Curl_setup_transfer(conn, -1, data->req.size, FALSE, NULL, + FIRSTSOCKET, NULL); + + /* not set by Curl_setup_transfer to preserve keepon bits */ + conn->sockfd = conn->writesockfd; + + if(result) { + state(conn, SSH_SCP_CHANNEL_FREE); + sshc->actualcode = result; + } + else { + /* store this original bitmask setup to use later on if we can't + figure out a "real" bitmask */ + sshc->orig_waitfor = data->req.keepon; + + /* we want to use the _sending_ function even when the socket turns + out readable as the underlying libssh2 scp send function will deal + with both accordingly */ + conn->cselect_bits = CURL_CSELECT_OUT; + + state(conn, SSH_STOP); + } + break; + + case SSH_SCP_DOWNLOAD_INIT: + { + curl_off_t bytecount; + + /* + * We must check the remote file; if it is a directory no values will + * be set in sb + */ + + /* + * If support for >2GB files exists, use it. + */ + + /* get a fresh new channel from the ssh layer */ +#if LIBSSH2_VERSION_NUM < 0x010700 + struct stat sb; + memset(&sb, 0, sizeof(struct stat)); + sshc->ssh_channel = libssh2_scp_recv(sshc->ssh_session, + sftp_scp->path, &sb); +#else + libssh2_struct_stat sb; + memset(&sb, 0, sizeof(libssh2_struct_stat)); + sshc->ssh_channel = libssh2_scp_recv2(sshc->ssh_session, + sftp_scp->path, &sb); +#endif + + if(!sshc->ssh_channel) { + int ssh_err; + char *err_msg = NULL; + + if(libssh2_session_last_errno(sshc->ssh_session) == + LIBSSH2_ERROR_EAGAIN) { + rc = LIBSSH2_ERROR_EAGAIN; + break; + } + + + ssh_err = (int)(libssh2_session_last_error(sshc->ssh_session, + &err_msg, NULL, 0)); + failf(conn->data, "%s", err_msg); + state(conn, SSH_SCP_CHANNEL_FREE); + sshc->actualcode = libssh2_session_error_to_CURLE(ssh_err); + break; + } + + /* download data */ + bytecount = (curl_off_t)sb.st_size; + data->req.maxdownload = (curl_off_t)sb.st_size; + Curl_setup_transfer(conn, FIRSTSOCKET, bytecount, FALSE, NULL, -1, NULL); + + /* not set by Curl_setup_transfer to preserve keepon bits */ + conn->writesockfd = conn->sockfd; + + /* we want to use the _receiving_ function even when the socket turns + out writableable as the underlying libssh2 recv function will deal + with both accordingly */ + conn->cselect_bits = CURL_CSELECT_IN; + + if(result) { + state(conn, SSH_SCP_CHANNEL_FREE); + sshc->actualcode = result; + } + else + state(conn, SSH_STOP); + } + break; + + case SSH_SCP_DONE: + if(data->set.upload) + state(conn, SSH_SCP_SEND_EOF); + else + state(conn, SSH_SCP_CHANNEL_FREE); + break; + + case SSH_SCP_SEND_EOF: + if(sshc->ssh_channel) { + rc = libssh2_channel_send_eof(sshc->ssh_channel); + if(rc == LIBSSH2_ERROR_EAGAIN) { + break; + } + if(rc) { + char *err_msg = NULL; + (void)libssh2_session_last_error(sshc->ssh_session, + &err_msg, NULL, 0); + infof(data, "Failed to send libssh2 channel EOF: %d %s\n", + rc, err_msg); + } + } + state(conn, SSH_SCP_WAIT_EOF); + break; + + case SSH_SCP_WAIT_EOF: + if(sshc->ssh_channel) { + rc = libssh2_channel_wait_eof(sshc->ssh_channel); + if(rc == LIBSSH2_ERROR_EAGAIN) { + break; + } + if(rc) { + char *err_msg = NULL; + (void)libssh2_session_last_error(sshc->ssh_session, + &err_msg, NULL, 0); + infof(data, "Failed to get channel EOF: %d %s\n", rc, err_msg); + } + } + state(conn, SSH_SCP_WAIT_CLOSE); + break; + + case SSH_SCP_WAIT_CLOSE: + if(sshc->ssh_channel) { + rc = libssh2_channel_wait_closed(sshc->ssh_channel); + if(rc == LIBSSH2_ERROR_EAGAIN) { + break; + } + if(rc) { + char *err_msg = NULL; + (void)libssh2_session_last_error(sshc->ssh_session, + &err_msg, NULL, 0); + infof(data, "Channel failed to close: %d %s\n", rc, err_msg); + } + } + state(conn, SSH_SCP_CHANNEL_FREE); + break; + + case SSH_SCP_CHANNEL_FREE: + if(sshc->ssh_channel) { + rc = libssh2_channel_free(sshc->ssh_channel); + if(rc == LIBSSH2_ERROR_EAGAIN) { + break; + } + if(rc < 0) { + char *err_msg = NULL; + (void)libssh2_session_last_error(sshc->ssh_session, + &err_msg, NULL, 0); + infof(data, "Failed to free libssh2 scp subsystem: %d %s\n", + rc, err_msg); + } + sshc->ssh_channel = NULL; + } + DEBUGF(infof(data, "SCP DONE phase complete\n")); +#if 0 /* PREV */ + state(conn, SSH_SESSION_DISCONNECT); +#endif + state(conn, SSH_STOP); + result = sshc->actualcode; + break; + + case SSH_SESSION_DISCONNECT: + /* during weird times when we've been prematurely aborted, the channel + is still alive when we reach this state and we MUST kill the channel + properly first */ + if(sshc->ssh_channel) { + rc = libssh2_channel_free(sshc->ssh_channel); + if(rc == LIBSSH2_ERROR_EAGAIN) { + break; + } + if(rc < 0) { + char *err_msg = NULL; + (void)libssh2_session_last_error(sshc->ssh_session, + &err_msg, NULL, 0); + infof(data, "Failed to free libssh2 scp subsystem: %d %s\n", + rc, err_msg); + } + sshc->ssh_channel = NULL; + } + + if(sshc->ssh_session) { + rc = libssh2_session_disconnect(sshc->ssh_session, "Shutdown"); + if(rc == LIBSSH2_ERROR_EAGAIN) { + break; + } + if(rc < 0) { + char *err_msg = NULL; + (void)libssh2_session_last_error(sshc->ssh_session, + &err_msg, NULL, 0); + infof(data, "Failed to disconnect libssh2 session: %d %s\n", + rc, err_msg); + } + } + + Curl_safefree(sshc->homedir); + conn->data->state.most_recent_ftp_entrypath = NULL; + + state(conn, SSH_SESSION_FREE); + break; + + case SSH_SESSION_FREE: +#ifdef HAVE_LIBSSH2_KNOWNHOST_API + if(sshc->kh) { + libssh2_knownhost_free(sshc->kh); + sshc->kh = NULL; + } +#endif + +#ifdef HAVE_LIBSSH2_AGENT_API + if(sshc->ssh_agent) { + rc = libssh2_agent_disconnect(sshc->ssh_agent); + if(rc == LIBSSH2_ERROR_EAGAIN) { + break; + } + if(rc < 0) { + char *err_msg = NULL; + (void)libssh2_session_last_error(sshc->ssh_session, + &err_msg, NULL, 0); + infof(data, "Failed to disconnect from libssh2 agent: %d %s\n", + rc, err_msg); + } + libssh2_agent_free(sshc->ssh_agent); + sshc->ssh_agent = NULL; + + /* NB: there is no need to free identities, they are part of internal + agent stuff */ + sshc->sshagent_identity = NULL; + sshc->sshagent_prev_identity = NULL; + } +#endif + + if(sshc->ssh_session) { + rc = libssh2_session_free(sshc->ssh_session); + if(rc == LIBSSH2_ERROR_EAGAIN) { + break; + } + if(rc < 0) { + char *err_msg = NULL; + (void)libssh2_session_last_error(sshc->ssh_session, + &err_msg, NULL, 0); + infof(data, "Failed to free libssh2 session: %d %s\n", rc, err_msg); + } + sshc->ssh_session = NULL; + } + + /* worst-case scenario cleanup */ + + DEBUGASSERT(sshc->ssh_session == NULL); + DEBUGASSERT(sshc->ssh_channel == NULL); + DEBUGASSERT(sshc->sftp_session == NULL); + DEBUGASSERT(sshc->sftp_handle == NULL); +#ifdef HAVE_LIBSSH2_KNOWNHOST_API + DEBUGASSERT(sshc->kh == NULL); +#endif +#ifdef HAVE_LIBSSH2_AGENT_API + DEBUGASSERT(sshc->ssh_agent == NULL); +#endif + + Curl_safefree(sshc->rsa_pub); + Curl_safefree(sshc->rsa); + + Curl_safefree(sshc->quote_path1); + Curl_safefree(sshc->quote_path2); + + Curl_safefree(sshc->homedir); + + Curl_safefree(sshc->readdir_filename); + Curl_safefree(sshc->readdir_longentry); + Curl_safefree(sshc->readdir_line); + Curl_safefree(sshc->readdir_linkPath); + + /* the code we are about to return */ + result = sshc->actualcode; + + memset(sshc, 0, sizeof(struct ssh_conn)); + + connclose(conn, "SSH session free"); + sshc->state = SSH_SESSION_FREE; /* current */ + sshc->nextstate = SSH_NO_STATE; + state(conn, SSH_STOP); + break; + + case SSH_QUIT: + /* fallthrough, just stop! */ + default: + /* internal error */ + sshc->nextstate = SSH_NO_STATE; + state(conn, SSH_STOP); + break; + } + + } while(!rc && (sshc->state != SSH_STOP)); + + if(rc == LIBSSH2_ERROR_EAGAIN) { + /* we would block, we need to wait for the socket to be ready (in the + right direction too)! */ + *block = TRUE; + } + + return result; +} + +/* called by the multi interface to figure out what socket(s) to wait for and + for what actions in the DO_DONE, PERFORM and WAITPERFORM states */ +static int ssh_perform_getsock(const struct connectdata *conn, + curl_socket_t *sock, /* points to numsocks + number of sockets */ + int numsocks) +{ +#ifdef HAVE_LIBSSH2_SESSION_BLOCK_DIRECTION + int bitmap = GETSOCK_BLANK; + (void)numsocks; + + sock[0] = conn->sock[FIRSTSOCKET]; + + if(conn->waitfor & KEEP_RECV) + bitmap |= GETSOCK_READSOCK(FIRSTSOCKET); + + if(conn->waitfor & KEEP_SEND) + bitmap |= GETSOCK_WRITESOCK(FIRSTSOCKET); + + return bitmap; +#else + /* if we don't know the direction we can use the generic *_getsock() + function even for the protocol_connect and doing states */ + return Curl_single_getsock(conn, sock, numsocks); +#endif +} + +/* Generic function called by the multi interface to figure out what socket(s) + to wait for and for what actions during the DOING and PROTOCONNECT states*/ +static int ssh_getsock(struct connectdata *conn, + curl_socket_t *sock, /* points to numsocks number + of sockets */ + int numsocks) +{ +#ifndef HAVE_LIBSSH2_SESSION_BLOCK_DIRECTION + (void)conn; + (void)sock; + (void)numsocks; + /* if we don't know any direction we can just play along as we used to and + not provide any sensible info */ + return GETSOCK_BLANK; +#else + /* if we know the direction we can use the generic *_getsock() function even + for the protocol_connect and doing states */ + return ssh_perform_getsock(conn, sock, numsocks); +#endif +} + +#ifdef HAVE_LIBSSH2_SESSION_BLOCK_DIRECTION +/* + * When one of the libssh2 functions has returned LIBSSH2_ERROR_EAGAIN this + * function is used to figure out in what direction and stores this info so + * that the multi interface can take advantage of it. Make sure to call this + * function in all cases so that when it _doesn't_ return EAGAIN we can + * restore the default wait bits. + */ +static void ssh_block2waitfor(struct connectdata *conn, bool block) +{ + struct ssh_conn *sshc = &conn->proto.sshc; + int dir = 0; + if(block) { + dir = libssh2_session_block_directions(sshc->ssh_session); + if(dir) { + /* translate the libssh2 define bits into our own bit defines */ + conn->waitfor = ((dir&LIBSSH2_SESSION_BLOCK_INBOUND)?KEEP_RECV:0) | + ((dir&LIBSSH2_SESSION_BLOCK_OUTBOUND)?KEEP_SEND:0); + } + } + if(!dir) + /* It didn't block or libssh2 didn't reveal in which direction, put back + the original set */ + conn->waitfor = sshc->orig_waitfor; +} +#else + /* no libssh2 directional support so we simply don't know */ +#define ssh_block2waitfor(x,y) Curl_nop_stmt +#endif + +/* called repeatedly until done from multi.c */ +static CURLcode ssh_multi_statemach(struct connectdata *conn, bool *done) +{ + struct ssh_conn *sshc = &conn->proto.sshc; + CURLcode result = CURLE_OK; + bool block; /* we store the status and use that to provide a ssh_getsock() + implementation */ + + result = ssh_statemach_act(conn, &block); + *done = (sshc->state == SSH_STOP) ? TRUE : FALSE; + ssh_block2waitfor(conn, block); + + return result; +} + +static CURLcode ssh_block_statemach(struct connectdata *conn, + bool disconnect) +{ + struct ssh_conn *sshc = &conn->proto.sshc; + CURLcode result = CURLE_OK; + struct Curl_easy *data = conn->data; + + while((sshc->state != SSH_STOP) && !result) { + bool block; + timediff_t left = 1000; + struct curltime now = Curl_now(); + + result = ssh_statemach_act(conn, &block); + if(result) + break; + + if(!disconnect) { + if(Curl_pgrsUpdate(conn)) + return CURLE_ABORTED_BY_CALLBACK; + + result = Curl_speedcheck(data, now); + if(result) + break; + + left = Curl_timeleft(data, NULL, FALSE); + if(left < 0) { + failf(data, "Operation timed out"); + return CURLE_OPERATION_TIMEDOUT; + } + } + +#ifdef HAVE_LIBSSH2_SESSION_BLOCK_DIRECTION + if(!result && block) { + int dir = libssh2_session_block_directions(sshc->ssh_session); + curl_socket_t sock = conn->sock[FIRSTSOCKET]; + curl_socket_t fd_read = CURL_SOCKET_BAD; + curl_socket_t fd_write = CURL_SOCKET_BAD; + if(LIBSSH2_SESSION_BLOCK_INBOUND & dir) + fd_read = sock; + if(LIBSSH2_SESSION_BLOCK_OUTBOUND & dir) + fd_write = sock; + /* wait for the socket to become ready */ + (void)Curl_socket_check(fd_read, CURL_SOCKET_BAD, fd_write, + left>1000?1000:left); /* ignore result */ + } +#endif + + } + + return result; +} + +/* + * SSH setup and connection + */ +static CURLcode ssh_setup_connection(struct connectdata *conn) +{ + struct SSHPROTO *ssh; + + conn->data->req.protop = ssh = calloc(1, sizeof(struct SSHPROTO)); + if(!ssh) + return CURLE_OUT_OF_MEMORY; + + return CURLE_OK; +} + +static Curl_recv scp_recv, sftp_recv; +static Curl_send scp_send, sftp_send; + +/* + * Curl_ssh_connect() gets called from Curl_protocol_connect() to allow us to + * do protocol-specific actions at connect-time. + */ +static CURLcode ssh_connect(struct connectdata *conn, bool *done) +{ +#ifdef CURL_LIBSSH2_DEBUG + curl_socket_t sock; +#endif + struct ssh_conn *ssh; + CURLcode result; + struct Curl_easy *data = conn->data; + + /* initialize per-handle data if not already */ + if(!data->req.protop) + ssh_setup_connection(conn); + + /* We default to persistent connections. We set this already in this connect + function to make the re-use checks properly be able to check this bit. */ + connkeep(conn, "SSH default"); + + if(conn->handler->protocol & CURLPROTO_SCP) { + conn->recv[FIRSTSOCKET] = scp_recv; + conn->send[FIRSTSOCKET] = scp_send; + } + else { + conn->recv[FIRSTSOCKET] = sftp_recv; + conn->send[FIRSTSOCKET] = sftp_send; + } + ssh = &conn->proto.sshc; + +#ifdef CURL_LIBSSH2_DEBUG + if(conn->user) { + infof(data, "User: %s\n", conn->user); + } + if(conn->passwd) { + infof(data, "Password: %s\n", conn->passwd); + } + sock = conn->sock[FIRSTSOCKET]; +#endif /* CURL_LIBSSH2_DEBUG */ + + ssh->ssh_session = libssh2_session_init_ex(my_libssh2_malloc, + my_libssh2_free, + my_libssh2_realloc, conn); + if(ssh->ssh_session == NULL) { + failf(data, "Failure initialising ssh session"); + return CURLE_FAILED_INIT; + } + + if(data->set.ssh_compression) { +#if LIBSSH2_VERSION_NUM >= 0x010208 + if(libssh2_session_flag(ssh->ssh_session, LIBSSH2_FLAG_COMPRESS, 1) < 0) +#endif + infof(data, "Failed to enable compression for ssh session\n"); + } + +#ifdef HAVE_LIBSSH2_KNOWNHOST_API + if(data->set.str[STRING_SSH_KNOWNHOSTS]) { + int rc; + ssh->kh = libssh2_knownhost_init(ssh->ssh_session); + if(!ssh->kh) { + /* eeek. TODO: free the ssh_session! */ + return CURLE_FAILED_INIT; + } + + /* read all known hosts from there */ + rc = libssh2_knownhost_readfile(ssh->kh, + data->set.str[STRING_SSH_KNOWNHOSTS], + LIBSSH2_KNOWNHOST_FILE_OPENSSH); + if(rc < 0) + infof(data, "Failed to read known hosts from %s\n", + data->set.str[STRING_SSH_KNOWNHOSTS]); + } +#endif /* HAVE_LIBSSH2_KNOWNHOST_API */ + +#ifdef CURL_LIBSSH2_DEBUG + libssh2_trace(ssh->ssh_session, ~0); + infof(data, "SSH socket: %d\n", (int)sock); +#endif /* CURL_LIBSSH2_DEBUG */ + + state(conn, SSH_INIT); + + result = ssh_multi_statemach(conn, done); + + return result; +} + +/* + *********************************************************************** + * + * scp_perform() + * + * This is the actual DO function for SCP. Get a file according to + * the options previously setup. + */ + +static +CURLcode scp_perform(struct connectdata *conn, + bool *connected, + bool *dophase_done) +{ + CURLcode result = CURLE_OK; + + DEBUGF(infof(conn->data, "DO phase starts\n")); + + *dophase_done = FALSE; /* not done yet */ + + /* start the first command in the DO phase */ + state(conn, SSH_SCP_TRANS_INIT); + + /* run the state-machine */ + result = ssh_multi_statemach(conn, dophase_done); + + *connected = conn->bits.tcpconnect[FIRSTSOCKET]; + + if(*dophase_done) { + DEBUGF(infof(conn->data, "DO phase is complete\n")); + } + + return result; +} + +/* called from multi.c while DOing */ +static CURLcode scp_doing(struct connectdata *conn, + bool *dophase_done) +{ + CURLcode result; + result = ssh_multi_statemach(conn, dophase_done); + + if(*dophase_done) { + DEBUGF(infof(conn->data, "DO phase is complete\n")); + } + return result; +} + +/* + * The DO function is generic for both protocols. There was previously two + * separate ones but this way means less duplicated code. + */ + +static CURLcode ssh_do(struct connectdata *conn, bool *done) +{ + CURLcode result; + bool connected = 0; + struct Curl_easy *data = conn->data; + struct ssh_conn *sshc = &conn->proto.sshc; + + *done = FALSE; /* default to false */ + + data->req.size = -1; /* make sure this is unknown at this point */ + + sshc->actualcode = CURLE_OK; /* reset error code */ + sshc->secondCreateDirs = 0; /* reset the create dir attempt state + variable */ + + Curl_pgrsSetUploadCounter(data, 0); + Curl_pgrsSetDownloadCounter(data, 0); + Curl_pgrsSetUploadSize(data, -1); + Curl_pgrsSetDownloadSize(data, -1); + + if(conn->handler->protocol & CURLPROTO_SCP) + result = scp_perform(conn, &connected, done); + else + result = sftp_perform(conn, &connected, done); + + return result; +} + +/* BLOCKING, but the function is using the state machine so the only reason + this is still blocking is that the multi interface code has no support for + disconnecting operations that takes a while */ +static CURLcode scp_disconnect(struct connectdata *conn, bool dead_connection) +{ + CURLcode result = CURLE_OK; + struct ssh_conn *ssh = &conn->proto.sshc; + (void) dead_connection; + + if(ssh->ssh_session) { + /* only if there's a session still around to use! */ + + state(conn, SSH_SESSION_DISCONNECT); + + result = ssh_block_statemach(conn, TRUE); + } + + return result; +} + +/* generic done function for both SCP and SFTP called from their specific + done functions */ +static CURLcode ssh_done(struct connectdata *conn, CURLcode status) +{ + CURLcode result = CURLE_OK; + struct SSHPROTO *sftp_scp = conn->data->req.protop; + + if(!status) { + /* run the state-machine + + TODO: when the multi interface is used, this _really_ should be using + the ssh_multi_statemach function but we have no general support for + non-blocking DONE operations! + */ + result = ssh_block_statemach(conn, FALSE); + } + else + result = status; + + if(sftp_scp) + Curl_safefree(sftp_scp->path); + if(Curl_pgrsDone(conn)) + return CURLE_ABORTED_BY_CALLBACK; + + conn->data->req.keepon = 0; /* clear all bits */ + return result; +} + + +static CURLcode scp_done(struct connectdata *conn, CURLcode status, + bool premature) +{ + (void)premature; /* not used */ + + if(!status) + state(conn, SSH_SCP_DONE); + + return ssh_done(conn, status); + +} + +static ssize_t scp_send(struct connectdata *conn, int sockindex, + const void *mem, size_t len, CURLcode *err) +{ + ssize_t nwrite; + (void)sockindex; /* we only support SCP on the fixed known primary socket */ + + /* libssh2_channel_write() returns int! */ + nwrite = (ssize_t) + libssh2_channel_write(conn->proto.sshc.ssh_channel, mem, len); + + ssh_block2waitfor(conn, (nwrite == LIBSSH2_ERROR_EAGAIN)?TRUE:FALSE); + + if(nwrite == LIBSSH2_ERROR_EAGAIN) { + *err = CURLE_AGAIN; + nwrite = 0; + } + else if(nwrite < LIBSSH2_ERROR_NONE) { + *err = libssh2_session_error_to_CURLE((int)nwrite); + nwrite = -1; + } + + return nwrite; +} + +static ssize_t scp_recv(struct connectdata *conn, int sockindex, + char *mem, size_t len, CURLcode *err) +{ + ssize_t nread; + (void)sockindex; /* we only support SCP on the fixed known primary socket */ + + /* libssh2_channel_read() returns int */ + nread = (ssize_t) + libssh2_channel_read(conn->proto.sshc.ssh_channel, mem, len); + + ssh_block2waitfor(conn, (nread == LIBSSH2_ERROR_EAGAIN)?TRUE:FALSE); + if(nread == LIBSSH2_ERROR_EAGAIN) { + *err = CURLE_AGAIN; + nread = -1; + } + + return nread; +} + +/* + * =============== SFTP =============== + */ + +/* + *********************************************************************** + * + * sftp_perform() + * + * This is the actual DO function for SFTP. Get a file/directory according to + * the options previously setup. + */ + +static +CURLcode sftp_perform(struct connectdata *conn, + bool *connected, + bool *dophase_done) +{ + CURLcode result = CURLE_OK; + + DEBUGF(infof(conn->data, "DO phase starts\n")); + + *dophase_done = FALSE; /* not done yet */ + + /* start the first command in the DO phase */ + state(conn, SSH_SFTP_QUOTE_INIT); + + /* run the state-machine */ + result = ssh_multi_statemach(conn, dophase_done); + + *connected = conn->bits.tcpconnect[FIRSTSOCKET]; + + if(*dophase_done) { + DEBUGF(infof(conn->data, "DO phase is complete\n")); + } + + return result; +} + +/* called from multi.c while DOing */ +static CURLcode sftp_doing(struct connectdata *conn, + bool *dophase_done) +{ + CURLcode result = ssh_multi_statemach(conn, dophase_done); + + if(*dophase_done) { + DEBUGF(infof(conn->data, "DO phase is complete\n")); + } + return result; +} + +/* BLOCKING, but the function is using the state machine so the only reason + this is still blocking is that the multi interface code has no support for + disconnecting operations that takes a while */ +static CURLcode sftp_disconnect(struct connectdata *conn, bool dead_connection) +{ + CURLcode result = CURLE_OK; + (void) dead_connection; + + DEBUGF(infof(conn->data, "SSH DISCONNECT starts now\n")); + + if(conn->proto.sshc.ssh_session) { + /* only if there's a session still around to use! */ + state(conn, SSH_SFTP_SHUTDOWN); + result = ssh_block_statemach(conn, TRUE); + } + + DEBUGF(infof(conn->data, "SSH DISCONNECT is done\n")); + + return result; + +} + +static CURLcode sftp_done(struct connectdata *conn, CURLcode status, + bool premature) +{ + struct ssh_conn *sshc = &conn->proto.sshc; + + if(!status) { + /* Post quote commands are executed after the SFTP_CLOSE state to avoid + errors that could happen due to open file handles during POSTQUOTE + operation */ + if(!status && !premature && conn->data->set.postquote) { + sshc->nextstate = SSH_SFTP_POSTQUOTE_INIT; + state(conn, SSH_SFTP_CLOSE); + } + else + state(conn, SSH_SFTP_CLOSE); + } + return ssh_done(conn, status); +} + +/* return number of sent bytes */ +static ssize_t sftp_send(struct connectdata *conn, int sockindex, + const void *mem, size_t len, CURLcode *err) +{ + ssize_t nwrite; /* libssh2_sftp_write() used to return size_t in 0.14 + but is changed to ssize_t in 0.15. These days we don't + support libssh2 0.15*/ + (void)sockindex; + + nwrite = libssh2_sftp_write(conn->proto.sshc.sftp_handle, mem, len); + + ssh_block2waitfor(conn, (nwrite == LIBSSH2_ERROR_EAGAIN)?TRUE:FALSE); + + if(nwrite == LIBSSH2_ERROR_EAGAIN) { + *err = CURLE_AGAIN; + nwrite = 0; + } + else if(nwrite < LIBSSH2_ERROR_NONE) { + *err = libssh2_session_error_to_CURLE((int)nwrite); + nwrite = -1; + } + + return nwrite; +} + +/* + * Return number of received (decrypted) bytes + * or <0 on error + */ +static ssize_t sftp_recv(struct connectdata *conn, int sockindex, + char *mem, size_t len, CURLcode *err) +{ + ssize_t nread; + (void)sockindex; + + nread = libssh2_sftp_read(conn->proto.sshc.sftp_handle, mem, len); + + ssh_block2waitfor(conn, (nread == LIBSSH2_ERROR_EAGAIN)?TRUE:FALSE); + + if(nread == LIBSSH2_ERROR_EAGAIN) { + *err = CURLE_AGAIN; + nread = -1; + + } + else if(nread < 0) { + *err = libssh2_session_error_to_CURLE((int)nread); + } + return nread; +} + +static const char *sftp_libssh2_strerror(int err) +{ + switch(err) { + case LIBSSH2_FX_NO_SUCH_FILE: + return "No such file or directory"; + + case LIBSSH2_FX_PERMISSION_DENIED: + return "Permission denied"; + + case LIBSSH2_FX_FAILURE: + return "Operation failed"; + + case LIBSSH2_FX_BAD_MESSAGE: + return "Bad message from SFTP server"; + + case LIBSSH2_FX_NO_CONNECTION: + return "Not connected to SFTP server"; + + case LIBSSH2_FX_CONNECTION_LOST: + return "Connection to SFTP server lost"; + + case LIBSSH2_FX_OP_UNSUPPORTED: + return "Operation not supported by SFTP server"; + + case LIBSSH2_FX_INVALID_HANDLE: + return "Invalid handle"; + + case LIBSSH2_FX_NO_SUCH_PATH: + return "No such file or directory"; + + case LIBSSH2_FX_FILE_ALREADY_EXISTS: + return "File already exists"; + + case LIBSSH2_FX_WRITE_PROTECT: + return "File is write protected"; + + case LIBSSH2_FX_NO_MEDIA: + return "No media"; + + case LIBSSH2_FX_NO_SPACE_ON_FILESYSTEM: + return "Disk full"; + + case LIBSSH2_FX_QUOTA_EXCEEDED: + return "User quota exceeded"; + + case LIBSSH2_FX_UNKNOWN_PRINCIPLE: + return "Unknown principle"; + + case LIBSSH2_FX_LOCK_CONFlICT: + return "File lock conflict"; + + case LIBSSH2_FX_DIR_NOT_EMPTY: + return "Directory not empty"; + + case LIBSSH2_FX_NOT_A_DIRECTORY: + return "Not a directory"; + + case LIBSSH2_FX_INVALID_FILENAME: + return "Invalid filename"; + + case LIBSSH2_FX_LINK_LOOP: + return "Link points to itself"; + } + return "Unknown error in libssh2"; +} + +#endif /* USE_LIBSSH2 */ |