diff options
Diffstat (limited to 'Utilities/cmcurl/lib/urldata.h')
| -rw-r--r-- | Utilities/cmcurl/lib/urldata.h | 1499 |
1 files changed, 932 insertions, 567 deletions
diff --git a/Utilities/cmcurl/lib/urldata.h b/Utilities/cmcurl/lib/urldata.h index 46d956d..8594c2f 100644 --- a/Utilities/cmcurl/lib/urldata.h +++ b/Utilities/cmcurl/lib/urldata.h @@ -1,5 +1,5 @@ -#ifndef __URLDATA_H -#define __URLDATA_H +#ifndef HEADER_CURL_URLDATA_H +#define HEADER_CURL_URLDATA_H /*************************************************************************** * _ _ ____ _ * Project ___| | | | _ \| | @@ -7,7 +7,7 @@ * | (__| |_| | _ <| |___ * \___|\___/|_| \_\_____| * - * Copyright (C) 1998 - 2007, Daniel Stenberg, <daniel@haxx.se>, et al. + * Copyright (C) 1998 - 2014, Daniel Stenberg, <daniel@haxx.se>, et al. * * This software is licensed as described in the file COPYING, which * you should have received as part of this distribution. The terms @@ -20,12 +20,11 @@ * This software is distributed on an "AS IS" basis, WITHOUT WARRANTY OF ANY * KIND, either express or implied. * - * $Id$ ***************************************************************************/ /* This file is for lib internal stuff */ -#include "setup.h" +#include "curl_setup.h" #define PORT_FTP 21 #define PORT_FTPS 990 @@ -34,8 +33,20 @@ #define PORT_HTTPS 443 #define PORT_DICT 2628 #define PORT_LDAP 389 +#define PORT_LDAPS 636 #define PORT_TFTP 69 #define PORT_SSH 22 +#define PORT_IMAP 143 +#define PORT_IMAPS 993 +#define PORT_POP3 110 +#define PORT_POP3S 995 +#define PORT_SMTP 25 +#define PORT_SMTPS 465 /* sometimes called SSMTP */ +#define PORT_RTSP 554 +#define PORT_RTMP 1935 +#define PORT_RTMPT PORT_HTTP +#define PORT_RTMPS PORT_HTTPS +#define PORT_GOPHER 70 #define DICT_MATCH "/MATCH:" #define DICT_MATCH2 "/M:" @@ -45,19 +56,37 @@ #define DICT_DEFINE3 "/LOOKUP:" #define CURL_DEFAULT_USER "anonymous" -#define CURL_DEFAULT_PASSWORD "curl_by_daniel@haxx.se" +#define CURL_DEFAULT_PASSWORD "ftp@example.com" + +/* Convenience defines for checking protocols or their SSL based version. Each + protocol handler should only ever have a single CURLPROTO_ in its protocol + field. */ +#define PROTO_FAMILY_HTTP (CURLPROTO_HTTP|CURLPROTO_HTTPS) +#define PROTO_FAMILY_FTP (CURLPROTO_FTP|CURLPROTO_FTPS) +#define PROTO_FAMILY_POP3 (CURLPROTO_POP3|CURLPROTO_POP3S) +#define PROTO_FAMILY_SMTP (CURLPROTO_SMTP|CURLPROTO_SMTPS) + +#define DEFAULT_CONNCACHE_SIZE 5 + +/* length of longest IPv6 address string including the trailing null */ +#define MAX_IPADR_LEN sizeof("ffff:ffff:ffff:ffff:ffff:ffff:255.255.255.255") + +/* Default FTP/IMAP etc response timeout in milliseconds. + Symbian OS panics when given a timeout much greater than 1/2 hour. +*/ +#define RESP_TIMEOUT (1800*1000) #include "cookie.h" #include "formdata.h" #ifdef USE_SSLEAY #ifdef USE_OPENSSL -#include "openssl/rsa.h" -#include "openssl/crypto.h" -#include "openssl/x509.h" -#include "openssl/pem.h" -#include "openssl/ssl.h" -#include "openssl/err.h" +#include <openssl/rsa.h> +#include <openssl/crypto.h> +#include <openssl/x509.h> +#include <openssl/pem.h> +#include <openssl/ssl.h> +#include <openssl/err.h> #ifdef HAVE_OPENSSL_ENGINE_H #include <openssl/engine.h> #endif @@ -65,19 +94,78 @@ #include <openssl/pkcs12.h> #endif #else /* SSLeay-style includes */ -#include "rsa.h" -#include "crypto.h" -#include "x509.h" -#include "pem.h" -#include "ssl.h" -#include "err.h" +#include <rsa.h> +#include <crypto.h> +#include <x509.h> +#include <pem.h> +#include <ssl.h> +#include <err.h> +#ifdef HAVE_OPENSSL_ENGINE_H +#include <engine.h> +#endif +#ifdef HAVE_OPENSSL_PKCS12_H +#include <pkcs12.h> +#endif #endif /* USE_OPENSSL */ +#ifdef USE_GNUTLS +#error Configuration error; cannot use GnuTLS *and* OpenSSL. +#endif #endif /* USE_SSLEAY */ #ifdef USE_GNUTLS #include <gnutls/gnutls.h> #endif +#ifdef USE_POLARSSL +#include <polarssl/ssl.h> +#include <polarssl/version.h> +#if POLARSSL_VERSION_NUMBER<0x01010000 +#include <polarssl/havege.h> +#else +#include <polarssl/entropy.h> +#include <polarssl/ctr_drbg.h> +#endif /* POLARSSL_VERSION_NUMBER<0x01010000 */ +#endif /* USE_POLARSSL */ + +#ifdef USE_CYASSL +#undef OCSP_REQUEST /* avoid cyassl/openssl/ssl.h clash with wincrypt.h */ +#undef OCSP_RESPONSE /* avoid cyassl/openssl/ssl.h clash with wincrypt.h */ +#include <cyassl/openssl/ssl.h> +#endif + +#ifdef USE_NSS +#include <nspr.h> +#include <pk11pub.h> +#endif + +#ifdef USE_QSOSSL +#include <qsossl.h> +#endif + +#ifdef USE_GSKIT +#include <gskssl.h> +#endif + +#ifdef USE_AXTLS +#include <axTLS/ssl.h> +#undef malloc +#undef calloc +#undef realloc +#endif /* USE_AXTLS */ + +#ifdef USE_SCHANNEL +#include "curl_sspi.h" +#include <schnlsp.h> +#include <schannel.h> +#endif + +#ifdef USE_DARWINSSL +#include <Security/Security.h> +/* For some reason, when building for iOS, the omnibus header above does + * not include SecureTransport.h as of iOS SDK 5.1. */ +#include <Security/SecureTransport.h> +#endif + #ifdef HAVE_NETINET_IN_H #include <netinet/in.h> #endif @@ -86,10 +174,10 @@ #ifdef HAVE_ZLIB_H #include <zlib.h> /* for content-encoding */ +#ifdef __SYMBIAN32__ +/* zlib pollutes the namespace with this definition */ +#undef WIN32 #endif - -#ifdef USE_ARES -#include <ares.h> #endif #include <curl/curl.h> @@ -99,6 +187,17 @@ #include "hash.h" #include "splay.h" +#include "imap.h" +#include "pop3.h" +#include "smtp.h" +#include "ftp.h" +#include "file.h" +#include "ssh.h" +#include "http.h" +#include "rtsp.h" +#include "wildcard.h" +#include "multihandle.h" + #ifdef HAVE_GSSAPI # ifdef HAVE_GSSGNU # include <gss.h> @@ -123,25 +222,46 @@ of need. */ #define HEADERSIZE 256 -#define CURLEASY_MAGIC_NUMBER 0xc0dedbad +#define CURLEASY_MAGIC_NUMBER 0xc0dedbadU -/* Just a convenience macro to get the larger value out of two given. +/* Some convenience macros to get the larger/smaller value out of two given. We prefix with CURL to prevent name collisions. */ #define CURLMAX(x,y) ((x)>(y)?(x):(y)) +#define CURLMIN(x,y) ((x)<(y)?(x):(y)) + -#ifdef HAVE_KRB4 -/* Types needed for krb4-ftp connections */ -struct krb4buffer { +#ifdef HAVE_GSSAPI +/* Types needed for krb5-ftp connections */ +struct krb5buffer { void *data; size_t size; size_t index; int eof_flag; }; + enum protection_level { - prot_clear, - prot_safe, - prot_confidential, - prot_private + PROT_NONE, /* first in list */ + PROT_CLEAR, + PROT_SAFE, + PROT_CONFIDENTIAL, + PROT_PRIVATE, + PROT_CMD, + PROT_LAST /* last in list */ +}; +#endif + +#ifdef USE_SCHANNEL +/* Structs to store Schannel handles */ +struct curl_schannel_cred { + CredHandle cred_handle; + TimeStamp time_stamp; + int refcount; + bool cached; +}; + +struct curl_schannel_ctxt { + CtxtHandle ctxt_handle; + TimeStamp time_stamp; }; #endif @@ -155,9 +275,19 @@ typedef enum { ssl_connect_done } ssl_connect_state; +typedef enum { + ssl_connection_none, + ssl_connection_negotiating, + ssl_connection_complete +} ssl_connection_state; + /* struct for data related to each SSL connection */ struct ssl_connect_data { - bool use; /* use ssl encrypted communications TRUE/FALSE */ + /* Use ssl encrypted communications TRUE/FALSE, not necessarily using it atm + but at least asked to or meaning to use it. See 'state' for the exact + current state of the connection. */ + bool use; + ssl_connection_state state; #ifdef USE_SSLEAY /* these ones requires specific SSL-types */ SSL_CTX* ctx; @@ -166,27 +296,94 @@ struct ssl_connect_data { ssl_connect_state connecting_state; #endif /* USE_SSLEAY */ #ifdef USE_GNUTLS - gnutls_session session; - gnutls_certificate_credentials cred; + gnutls_session_t session; + gnutls_certificate_credentials_t cred; +#ifdef USE_TLS_SRP + gnutls_srp_client_credentials_t srp_client_cred; +#endif + ssl_connect_state connecting_state; #endif /* USE_GNUTLS */ +#ifdef USE_POLARSSL + ctr_drbg_context ctr_drbg; + entropy_context entropy; + ssl_context ssl; + ssl_session ssn; + int server_fd; + x509_crt cacert; + x509_crt clicert; + x509_crl crl; + rsa_context rsa; + ssl_connect_state connecting_state; +#endif /* USE_POLARSSL */ +#ifdef USE_CYASSL + SSL_CTX* ctx; + SSL* handle; + ssl_connect_state connecting_state; +#endif /* USE_CYASSL */ +#ifdef USE_NSS + PRFileDesc *handle; + char *client_nickname; + struct SessionHandle *data; + struct curl_llist *obj_list; + PK11GenericObject *obj_clicert; + ssl_connect_state connecting_state; +#endif /* USE_NSS */ +#ifdef USE_QSOSSL + SSLHandle *handle; +#endif /* USE_QSOSSL */ +#ifdef USE_GSKIT + gsk_handle handle; + int iocport; + ssl_connect_state connecting_state; +#endif +#ifdef USE_AXTLS + SSL_CTX* ssl_ctx; + SSL* ssl; + ssl_connect_state connecting_state; +#endif /* USE_AXTLS */ +#ifdef USE_SCHANNEL + struct curl_schannel_cred *cred; + struct curl_schannel_ctxt *ctxt; + SecPkgContext_StreamSizes stream_sizes; + ssl_connect_state connecting_state; + size_t encdata_length, decdata_length; + size_t encdata_offset, decdata_offset; + unsigned char *encdata_buffer, *decdata_buffer; + unsigned long req_flags, ret_flags; +#endif /* USE_SCHANNEL */ +#ifdef USE_DARWINSSL + SSLContextRef ssl_ctx; + curl_socket_t ssl_sockfd; + ssl_connect_state connecting_state; + bool ssl_direction; /* true if writing, false if reading */ + size_t ssl_write_buffered_length; +#endif /* USE_DARWINSSL */ }; struct ssl_config_data { long version; /* what version the client wants to use */ long certverifyresult; /* result from the certificate verification */ - long verifypeer; /* set TRUE if this is desired */ - long verifyhost; /* 0: no verify - 1: check that CN exists - 2: CN must match hostname */ - char *CApath; /* DOES NOT WORK ON WINDOWS */ - char *CAfile; /* cerficate to verify peer against */ + + bool verifypeer; /* set TRUE if this is desired */ + bool verifyhost; /* set TRUE if CN/SAN must match hostname */ + char *CApath; /* certificate dir (doesn't work on windows) */ + char *CAfile; /* certificate to verify peer against */ + const char *CRLfile; /* CRL to check certificate revocation */ + const char *issuercert;/* optional issuer certificate filename */ char *random_file; /* path to file containing "random" data */ char *egdsocket; /* path to file containing the EGD daemon socket */ char *cipher_list; /* list of ciphers to use */ - long numsessions; /* SSL session id cache size */ + size_t max_ssl_sessions; /* SSL session id cache size */ curl_ssl_ctx_callback fsslctx; /* function to initialize ssl ctx */ void *fsslctxp; /* parameter for call back */ bool sessionid; /* cache session IDs or not */ + bool certinfo; /* gather lots of certificate info */ + +#ifdef USE_TLS_SRP + char *username; /* TLS username (for, e.g., SRP) */ + char *password; /* TLS password (for, e.g., SRP) */ + enum CURL_TLSAUTH authtype; /* TLS authentication type (default SRP) */ +#endif }; /* information stored about one single SSL session */ @@ -195,7 +392,7 @@ struct curl_ssl_session { void *sessionid; /* as returned from the SSL layer */ size_t idsize; /* if known, otherwise 0 */ long age; /* just a number, the higher the more recent */ - unsigned short remote_port; /* remote port to connect to */ + int remote_port; /* remote port to connect to */ struct ssl_config_data ssl_config; /* setup for this session */ }; @@ -221,19 +418,26 @@ typedef enum { } curlntlm; #ifdef USE_WINDOWS_SSPI -/* When including these headers, you must define either SECURITY_WIN32 - * or SECURITY_KERNEL, indicating who is compiling the code. - */ -#define SECURITY_WIN32 1 -#include <security.h> -#include <sspi.h> -#include <rpc.h> +#include "curl_sspi.h" #endif #if defined(CURL_DOES_CONVERSIONS) && defined(HAVE_ICONV) #include <iconv.h> #endif +/* Struct used for GSSAPI (Kerberos V5) authentication */ +#if defined(USE_WINDOWS_SSPI) +struct kerberos5data { + CredHandle *credentials; + CtxtHandle *context; + TCHAR *spn; + SEC_WINNT_AUTH_IDENTITY identity; + SEC_WINNT_AUTH_IDENTITY *p_identity; + size_t token_max; + BYTE *output_token; +}; +#endif + /* Struct used for NTLM challenge-response authentication */ struct ntlmdata { curlntlm state; @@ -242,196 +446,54 @@ struct ntlmdata { CtxtHandle c_handle; SEC_WINNT_AUTH_IDENTITY identity; SEC_WINNT_AUTH_IDENTITY *p_identity; + size_t max_token_length; + BYTE *output_token; int has_handles; void *type_2; - int n_type_2; + unsigned long n_type_2; #else unsigned int flags; unsigned char nonce[8]; + void* target_info; /* TargetInfo received in the ntlm type-2 message */ + unsigned int target_info_len; #endif }; -#ifdef HAVE_GSSAPI +#ifdef USE_SPNEGO struct negotiatedata { - bool gss; /* Whether we're processing GSS-Negotiate or Negotiate */ - const char* protocol; /* "GSS-Negotiate" or "Negotiate" */ + /* When doing Negotiate (SPNEGO) auth, we first need to send a token + and then validate the received one. */ + enum { GSS_AUTHNONE, GSS_AUTHRECV, GSS_AUTHSENT } state; +#ifdef HAVE_GSSAPI OM_uint32 status; gss_ctx_id_t context; gss_name_t server_name; gss_buffer_desc output_token; -}; +#else +#ifdef USE_WINDOWS_SSPI + DWORD status; + CtxtHandle *context; + CredHandle *credentials; + SEC_WINNT_AUTH_IDENTITY identity; + SEC_WINNT_AUTH_IDENTITY *p_identity; + TCHAR *server_name; + size_t max_token_length; + BYTE *output_token; + size_t output_token_length; +#endif #endif - -/**************************************************************************** - * HTTP unique setup - ***************************************************************************/ -struct HTTP { - struct FormData *sendit; - curl_off_t postsize; /* off_t to handle large file sizes */ - char *postdata; - - const char *p_pragma; /* Pragma: string */ - const char *p_accept; /* Accept: string */ - curl_off_t readbytecount; - curl_off_t writebytecount; - - /* For FORM posting */ - struct Form form; - struct Curl_chunker chunk; - - struct back { - curl_read_callback fread; /* backup storage for fread pointer */ - void *fread_in; /* backup storage for fread_in pointer */ - char *postdata; - curl_off_t postsize; - } backup; - - enum { - HTTPSEND_NADA, /* init */ - HTTPSEND_REQUEST, /* sending a request */ - HTTPSEND_BODY, /* sending body */ - HTTPSEND_LAST /* never use this */ - } sending; - - void *send_buffer; /* used if the request couldn't be sent in one chunk, - points to an allocated send_buffer struct */ -}; - -/**************************************************************************** - * FTP unique setup - ***************************************************************************/ -typedef enum { - FTP_STOP, /* do nothing state, stops the state machine */ - FTP_WAIT220, /* waiting for the initial 220 response immediately after - a connect */ - FTP_AUTH, - FTP_USER, - FTP_PASS, - FTP_ACCT, - FTP_PBSZ, - FTP_PROT, - FTP_CCC, - FTP_PWD, - FTP_QUOTE, /* waiting for a response to a command sent in a quote list */ - FTP_RETR_PREQUOTE, - FTP_STOR_PREQUOTE, - FTP_POSTQUOTE, - FTP_CWD, /* change dir */ - FTP_MKD, /* if the dir didn't exist */ - FTP_MDTM, /* to figure out the datestamp */ - FTP_TYPE, /* to set type when doing a head-like request */ - FTP_LIST_TYPE, /* set type when about to do a dir list */ - FTP_RETR_TYPE, /* set type when about to RETR a file */ - FTP_STOR_TYPE, /* set type when about to STOR a file */ - FTP_SIZE, /* get the remote file's size for head-like request */ - FTP_RETR_SIZE, /* get the remote file's size for RETR */ - FTP_STOR_SIZE, /* get the size for (resumed) STOR */ - FTP_REST, /* when used to check if the server supports it in head-like */ - FTP_RETR_REST, /* when asking for "resume" in for RETR */ - FTP_PORT, /* generic state for PORT, LPRT and EPRT, check count1 */ - FTP_PASV, /* generic state for PASV and EPSV, check count1 */ - FTP_LIST, /* generic state for LIST, NLST or a custom list command */ - FTP_RETR, - FTP_STOR, /* generic state for STOR and APPE */ - FTP_QUIT, - FTP_LAST /* never used */ -} ftpstate; - -typedef enum { - FTPFILE_MULTICWD = 1, /* as defined by RFC1738 */ - FTPFILE_NOCWD = 2, /* use SIZE / RETR / STOR on the full path */ - FTPFILE_SINGLECWD = 3 /* make one CWD, then SIZE / RETR / STOR on the file */ -} curl_ftpfile; - -/* This FTP struct is used in the SessionHandle. All FTP data that is - connection-oriented must be in FTP_conn to properly deal with the fact that - perhaps the SessionHandle is changed between the times the connection is - used. */ -struct FTP { - curl_off_t *bytecountp; - char *user; /* user name string */ - char *passwd; /* password string */ - char *urlpath; /* the originally given path part of the URL */ - char *file; /* decoded file */ - bool no_transfer; /* nothing was transfered, (possibly because a resumed - transfer already was complete) */ - curl_off_t downloadsize; -}; - -/* ftp_conn is used for striuct connection-oriented data in the connectdata - struct */ -struct ftp_conn { - char *entrypath; /* the PWD reply when we logged on */ - char **dirs; /* realloc()ed array for path components */ - int dirdepth; /* number of entries used in the 'dirs' array */ - int diralloc; /* number of entries allocated for the 'dirs' array */ - char *cache; /* data cache between getresponse()-calls */ - curl_off_t cache_size; /* size of cache in bytes */ - bool dont_check; /* Set to TRUE to prevent the final (post-transfer) - file size and 226/250 status check. It should still - read the line, just ignore the result. */ - long response_time; /* When no timeout is given, this is the amount of - seconds we await for an FTP response. Initialized - in Curl_ftp_connect() */ - bool ctl_valid; /* Tells Curl_ftp_quit() whether or not to do anything. If - the connection has timed out or been closed, this - should be FALSE when it gets to Curl_ftp_quit() */ - bool cwddone; /* if it has been determined that the proper CWD combo - already has been done */ - bool cwdfail; /* set TRUE if a CWD command fails, as then we must prevent - caching the current directory */ - char *prevpath; /* conn->path from the previous transfer */ - char transfertype; /* set by ftp_transfertype for use by Curl_client_write()a - and others (A/I or zero) */ - size_t nread_resp; /* number of bytes currently read of a server response */ - char *linestart_resp; /* line start pointer for the FTP server response - reader function */ - - int count1; /* general purpose counter for the state machine */ - int count2; /* general purpose counter for the state machine */ - int count3; /* general purpose counter for the state machine */ - char *sendthis; /* allocated pointer to a buffer that is to be sent to the - ftp server */ - size_t sendleft; /* number of bytes left to send from the sendthis buffer */ - size_t sendsize; /* total size of the sendthis buffer */ - struct timeval response; /* set to Curl_tvnow() when a command has been sent - off, used to time-out response reading */ - ftpstate state; /* always use ftp.c:state() to change state! */ -}; - -struct SSHPROTO { - curl_off_t *bytecountp; - char *user; - char *passwd; - char *path; /* the path we operate on */ - char *homedir; - char *errorstr; -#ifdef USE_LIBSSH2 - LIBSSH2_SESSION *ssh_session; /* Secure Shell session */ - LIBSSH2_CHANNEL *ssh_channel; /* Secure Shell channel handle */ - LIBSSH2_SFTP *sftp_session; /* SFTP handle */ - LIBSSH2_SFTP_HANDLE *sftp_handle; -#endif /* USE_LIBSSH2 */ }; +#endif -/**************************************************************************** - * FILE unique setup - ***************************************************************************/ -struct FILEPROTO { - char *path; /* the path we operate on */ - char *freepath; /* pointer to the allocated block we must free, this might - differ from the 'path' pointer */ - int fd; /* open file descriptor to read from! */ -}; - /* * Boolean values that concerns this connection. */ struct ConnectBits { + /* always modify bits.close with the connclose() and connkeep() macros! */ bool close; /* if set, we close the connection after this request */ bool reuse; /* if set, this is a re-used connection */ - bool chunk; /* if set, this is a chunked transfer-encoding */ + bool proxy; /* if set, this transfer is done through a proxy - any type */ bool httpproxy; /* if set, this transfer is done through a http proxy */ bool user_passwd; /* do we use user+password for this connection? */ bool proxy_user_passwd; /* user+password for the proxy? */ @@ -441,23 +503,13 @@ struct ConnectBits { bool do_more; /* this is set TRUE if the ->curl_do_more() function is supposed to be called, after ->curl_do() */ - - bool upload_chunky; /* set TRUE if we are doing chunked transfer-encoding - on upload */ - bool getheader; /* TRUE if header parsing is wanted */ - - bool forbidchunk; /* used only to explicitly forbid chunk-upload for - specific upload buffers. See readmoredata() in - http.c for details. */ - - bool tcpconnect; /* the TCP layer (or simimlar) is connected, this is set + bool tcpconnect[2]; /* the TCP layer (or similar) is connected, this is set the first time on the first connect function call */ bool protoconnstart;/* the protocol layer has STARTED its operation after the TCP layer connect */ bool retry; /* this connection is about to get closed and then re-attempted at another connection. */ - bool no_body; /* CURLOPT_NO_BODY (or similar) was set */ bool tunnel_proxy; /* if CONNECT is used to "tunnel" through the proxy. This is implicit when SSL-protocols are used through proxies, but can also be enabled explicitly by @@ -478,10 +530,8 @@ struct ConnectBits { EPRT doesn't work we disable it for the forthcoming requests */ bool netrc; /* name+password provided by netrc */ + bool userpwd_in_url; /* name+password found in url */ - bool trailerHdrPresent; /* Set when Trailer: header found in HTTP response. - Required to determine whether to look for trailers - in case of Transfer-Encoding: chunking */ bool done; /* set to FALSE when Curl_do() is called and set to TRUE when Curl_done() is called, to prevent Curl_done() to get invoked twice when the multi interface is @@ -492,13 +542,16 @@ struct ConnectBits { bool proxy_connect_closed; /* set true if a proxy disconnected the connection in a CONNECT request with auth, so that libcurl should reconnect and continue. */ + bool bound; /* set true if bind() has already been done on this socket/ + connection */ + bool type_set; /* type= was used in the URL */ }; struct hostname { char *rawalloc; /* allocated "raw" version of the name */ char *encalloc; /* allocated IDN-encoded version of the name */ char *name; /* name to use internally, might be encoded, might be raw */ - char *dispname; /* name to display, as 'name' might be encoded */ + const char *dispname; /* name to display, as 'name' might be encoded */ }; /* @@ -506,35 +559,95 @@ struct hostname { */ #define KEEP_NONE 0 -#define KEEP_READ 1 /* there is or may be data to read */ -#define KEEP_WRITE 2 /* there is or may be data to write */ -#define KEEP_READ_HOLD 4 /* when set, no reading should be done but there - might still be data to read */ -#define KEEP_WRITE_HOLD 8 /* when set, no writing should be done but there - might still be data to write */ +#define KEEP_RECV (1<<0) /* there is or may be data to read */ +#define KEEP_SEND (1<<1) /* there is or may be data to write */ +#define KEEP_RECV_HOLD (1<<2) /* when set, no reading should be done but there + might still be data to read */ +#define KEEP_SEND_HOLD (1<<3) /* when set, no writing should be done but there + might still be data to write */ +#define KEEP_RECV_PAUSE (1<<4) /* reading is paused */ +#define KEEP_SEND_PAUSE (1<<5) /* writing is paused */ -/* - * This struct is all the previously local variables from Curl_perform() moved - * to struct to allow the function to return and get re-invoked better without - * losing state. - */ +#define KEEP_RECVBITS (KEEP_RECV | KEEP_RECV_HOLD | KEEP_RECV_PAUSE) +#define KEEP_SENDBITS (KEEP_SEND | KEEP_SEND_HOLD | KEEP_SEND_PAUSE) + + +#ifdef HAVE_LIBZ +typedef enum { + ZLIB_UNINIT, /* uninitialized */ + ZLIB_INIT, /* initialized */ + ZLIB_GZIP_HEADER, /* reading gzip header */ + ZLIB_GZIP_INFLATING, /* inflating gzip stream */ + ZLIB_INIT_GZIP /* initialized in transparent gzip mode */ +} zlibInitState; +#endif + +#ifdef CURLRES_ASYNCH +struct Curl_async { + char *hostname; + int port; + struct Curl_dns_entry *dns; + bool done; /* set TRUE when the lookup is complete */ + int status; /* if done is TRUE, this is the status from the callback */ + void *os_specific; /* 'struct thread_data' for Windows */ +}; +#endif + +#define FIRSTSOCKET 0 +#define SECONDARYSOCKET 1 + +/* These function pointer types are here only to allow easier typecasting + within the source when we need to cast between data pointers (such as NULL) + and function pointers. */ +typedef CURLcode (*Curl_do_more_func)(struct connectdata *, int *); +typedef CURLcode (*Curl_done_func)(struct connectdata *, CURLcode, bool); -struct Curl_transfer_keeper { +enum expect100 { + EXP100_SEND_DATA, /* enough waiting, just send the body now */ + EXP100_AWAITING_CONTINUE, /* waiting for the 100 Continue header */ + EXP100_SENDING_REQUEST, /* still sending the request but will wait for + the 100 header once done with the request */ + EXP100_FAILED /* used on 417 Expectation Failed */ +}; - /** Values copied over from the HandleData struct each time on init **/ +enum upgrade101 { + UPGR101_INIT, /* default state */ + UPGR101_REQUESTED, /* upgrade requested */ + UPGR101_RECEIVED, /* response received */ + UPGR101_WORKING /* talking upgraded protocol */ +}; +enum negotiatenpn { + NPN_INIT, /* default state */ + NPN_HTTP1_1, /* HTTP/1.1 negotiated */ + NPN_HTTP2 /* HTTP2 (draft-xx) negotiated */ +}; + +/* + * Request specific data in the easy handle (SessionHandle). Previously, + * these members were on the connectdata struct but since a conn struct may + * now be shared between different SessionHandles, we store connection-specific + * data here. This struct only keeps stuff that's interesting for *this* + * request, as it will be cleared between multiple ones + */ +struct SingleRequest { curl_off_t size; /* -1 if unknown at this point */ curl_off_t *bytecountp; /* return number of bytes read or NULL */ - curl_off_t maxdownload; /* in bytes, the maximum amount of data to fetch, 0 - means unlimited */ + curl_off_t maxdownload; /* in bytes, the maximum amount of data to fetch, + -1 means unlimited */ curl_off_t *writebytecountp; /* return number of bytes written or NULL */ - /** End of HandleData struct copies **/ - curl_off_t bytecount; /* total number of bytes read */ curl_off_t writebytecount; /* number of bytes written */ + long headerbytecount; /* only count received headers */ + long deductheadercount; /* this amount of bytes doesn't count when we check + if anything has been transferred at the end of a + connection. We use this counter to make only a + 100 reply (without a following second response + code) result in a CURLE_GOT_NOTHING error code */ + struct timeval start; /* transfer started at this time */ struct timeval now; /* current time */ bool header; /* incoming data has HTTP header */ @@ -556,24 +669,21 @@ struct Curl_transfer_keeper { bool content_range; /* set TRUE if Content-Range: was found */ curl_off_t offset; /* possible resume offset read from the Content-Range: header */ - int httpcode; /* error code from the 'HTTP/1.? XXX' line */ - int httpversion; /* the HTTP version*10 */ + int httpcode; /* error code from the 'HTTP/1.? XXX' or + 'RTSP/1.? XXX' line */ struct timeval start100; /* time stamp to wait for the 100 code from */ - bool write_after_100_header; /* TRUE = we enable the write after we - received a 100-continue/timeout or - FALSE = directly */ - bool wait100_after_headers; /* TRUE = after the request-headers have been - sent off properly, we go into the wait100 - state, FALSE = don't */ - int content_encoding; /* What content encoding. sec 3.5, RFC2616. */ + enum expect100 exp100; /* expect 100 continue state */ + enum upgrade101 upgr101; /* 101 upgrade state */ + + int auto_decoding; /* What content encoding. sec 3.5, RFC2616. */ #define IDENTITY 0 /* No encoding */ -#define DEFLATE 1 /* zlib delfate [RFC 1950 & 1951] */ +#define DEFLATE 1 /* zlib deflate [RFC 1950 & 1951] */ #define GZIP 2 /* gzip algorithm [RFC 1952] */ #define COMPRESS 3 /* Not handled, added for completeness */ #ifdef HAVE_LIBZ - bool zlib_init; /* True if zlib already initialized; + zlibInitState zlib_init; /* possible zlib init state; undefined if Content-Encoding header. */ z_stream z; /* State structure for zlib. */ #endif @@ -593,47 +703,11 @@ struct Curl_transfer_keeper { bool ignorebody; /* we read a response-body but we ignore it! */ bool ignorecl; /* This HTTP response has no body so we ignore the Content- Length: header */ -}; - -#if defined(USE_ARES) || defined(USE_THREADING_GETHOSTBYNAME) || \ - defined(USE_THREADING_GETADDRINFO) -struct Curl_async { - char *hostname; - int port; - struct Curl_dns_entry *dns; - bool done; /* set TRUE when the lookup is complete */ - int status; /* if done is TRUE, this is the status from the callback */ - void *os_specific; /* 'struct thread_data' for Windows */ -}; -#endif - -#define FIRSTSOCKET 0 -#define SECONDARYSOCKET 1 - -/* These function pointer types are here only to allow easier typecasting - within the source when we need to cast between data pointers (such as NULL) - and function pointers. */ -typedef CURLcode (*Curl_do_more_func)(struct connectdata *); -typedef CURLcode (*Curl_done_func)(struct connectdata *, CURLcode, bool); - -/* - * Store's request specific data in the easy handle (SessionHandle). - * Previously, these members were on the connectdata struct but since - * a conn struct may now be shared between different SessionHandles, - * we store connection-specific data here. - * - */ -struct HandleData { - char *pathbuffer;/* allocated buffer to store the URL's path part in */ - char *path; /* path to use, points to somewhere within the pathbuffer - area */ - - char *newurl; /* This can only be set if a Location: was in the - document headers */ - - /* This struct is inited when needed */ - struct Curl_transfer_keeper keep; + char *location; /* This points to an allocated version of the Location: + header data */ + char *newurl; /* Set to the new URL to use when a redirect or a retry is + wanted */ /* 'upload_present' is used to keep a byte counter of how much data there is still left in the buffer, aimed for upload. */ @@ -645,34 +719,126 @@ struct HandleData { position */ char *upload_fromhere; - curl_off_t size; /* -1 if unknown at this point */ - curl_off_t *bytecountp; /* return number of bytes read or NULL */ + bool chunk; /* if set, this is a chunked transfer-encoding */ + bool upload_chunky; /* set TRUE if we are doing chunked transfer-encoding + on upload */ + bool getheader; /* TRUE if header parsing is wanted */ - curl_off_t maxdownload; /* in bytes, the maximum amount of data to fetch, 0 - means unlimited */ - curl_off_t *writebytecountp; /* return number of bytes written or NULL */ + bool forbidchunk; /* used only to explicitly forbid chunk-upload for + specific upload buffers. See readmoredata() in + http.c for details. */ - bool use_range; - bool rangestringalloc; /* the range string is malloc()'ed */ + void *protop; /* Allocated protocol-specific data. Each protocol + handler makes sure this points to data it needs. */ +}; - char *range; /* range, if used. See README for detailed specification on - this syntax. */ - curl_off_t resume_from; /* continue [ftp] transfer from here */ +/* + * Specific protocol handler. + */ - /* Protocol specific data */ +struct Curl_handler { + const char * scheme; /* URL scheme name. */ - union { - struct HTTP *http; - struct HTTP *https; /* alias, just for the sake of being more readable */ - struct FTP *ftp; - void *tftp; /* private for tftp.c-eyes only */ - struct FILEPROTO *file; - void *telnet; /* private for telnet.c-eyes only */ - void *generic; - struct SSHPROTO *ssh; - } proto; + /* Complement to setup_connection_internals(). */ + CURLcode (*setup_connection)(struct connectdata *); + + /* These two functions MUST be set to be protocol dependent */ + CURLcode (*do_it)(struct connectdata *, bool *done); + Curl_done_func done; + + /* If the curl_do() function is better made in two halves, this + * curl_do_more() function will be called afterwards, if set. For example + * for doing the FTP stuff after the PASV/PORT command. + */ + Curl_do_more_func do_more; + + /* This function *MAY* be set to a protocol-dependent function that is run + * after the connect() and everything is done, as a step in the connection. + * The 'done' pointer points to a bool that should be set to TRUE if the + * function completes before return. If it doesn't complete, the caller + * should call the curl_connecting() function until it is. + */ + CURLcode (*connect_it)(struct connectdata *, bool *done); + + /* See above. Currently only used for FTP. */ + CURLcode (*connecting)(struct connectdata *, bool *done); + CURLcode (*doing)(struct connectdata *, bool *done); + + /* Called from the multi interface during the PROTOCONNECT phase, and it + should then return a proper fd set */ + int (*proto_getsock)(struct connectdata *conn, + curl_socket_t *socks, + int numsocks); + + /* Called from the multi interface during the DOING phase, and it should + then return a proper fd set */ + int (*doing_getsock)(struct connectdata *conn, + curl_socket_t *socks, + int numsocks); + + /* Called from the multi interface during the DO_MORE phase, and it should + then return a proper fd set */ + int (*domore_getsock)(struct connectdata *conn, + curl_socket_t *socks, + int numsocks); + + /* Called from the multi interface during the DO_DONE, PERFORM and + WAITPERFORM phases, and it should then return a proper fd set. Not setting + this will make libcurl use the generic default one. */ + int (*perform_getsock)(const struct connectdata *conn, + curl_socket_t *socks, + int numsocks); + + /* This function *MAY* be set to a protocol-dependent function that is run + * by the curl_disconnect(), as a step in the disconnection. If the handler + * is called because the connection has been considered dead, dead_connection + * is set to TRUE. + */ + CURLcode (*disconnect)(struct connectdata *, bool dead_connection); + + /* If used, this function gets called from transfer.c:readwrite_data() to + allow the protocol to do extra reads/writes */ + CURLcode (*readwrite)(struct SessionHandle *data, struct connectdata *conn, + ssize_t *nread, bool *readmore); + + long defport; /* Default port. */ + unsigned int protocol; /* See CURLPROTO_* - this needs to be the single + specific protocol bit */ + unsigned int flags; /* Extra particular characteristics, see PROTOPT_* */ }; +#define PROTOPT_NONE 0 /* nothing extra */ +#define PROTOPT_SSL (1<<0) /* uses SSL */ +#define PROTOPT_DUAL (1<<1) /* this protocol uses two connections */ +#define PROTOPT_CLOSEACTION (1<<2) /* need action before socket close */ +/* some protocols will have to call the underlying functions without regard to + what exact state the socket signals. IE even if the socket says "readable", + the send function might need to be called while uploading, or vice versa. +*/ +#define PROTOPT_DIRLOCK (1<<3) +#define PROTOPT_NONETWORK (1<<4) /* protocol doesn't use the network! */ +#define PROTOPT_NEEDSPWD (1<<5) /* needs a password, and if none is set it + gets a default */ +#define PROTOPT_NOURLQUERY (1<<6) /* protocol can't handle + url query strings (?foo=bar) ! */ +#define PROTOPT_CREDSPERREQUEST (1<<7) /* requires login credentials per + request instead of per connection */ + + +/* return the count of bytes sent, or -1 on error */ +typedef ssize_t (Curl_send)(struct connectdata *conn, /* connection data */ + int sockindex, /* socketindex */ + const void *buf, /* data to write */ + size_t len, /* max amount to write */ + CURLcode *err); /* error to return */ + +/* return the count of bytes read, or -1 on error */ +typedef ssize_t (Curl_recv)(struct connectdata *conn, /* connection data */ + int sockindex, /* socketindex */ + char *buf, /* store data here */ + size_t len, /* max amount to read */ + CURLcode *err); /* error to return */ + /* * The connectdata struct contains all fields and variables that should be * unique for an entire connection. @@ -683,31 +849,22 @@ struct connectdata { connection is used! */ struct SessionHandle *data; + /* chunk is for HTTP chunked encoding, but is in the general connectdata + struct only because we can do just about any protocol through a HTTP proxy + and a HTTP proxy may in fact respond using chunked encoding */ + struct Curl_chunker chunk; + + curl_closesocket_callback fclosesocket; /* function closing the socket(s) */ + void *closesocket_client; + bool inuse; /* This is a marker for the connection cache logic. If this is TRUE this handle is being used by an easy handle and cannot be used by any other easy handle without careful consideration (== only for pipelining). */ /**** Fields set when inited and not modified again */ - long connectindex; /* what index in the connection cache connects index this - particular struct has */ - long protocol; /* PROT_* flags concerning the protocol set */ -#define PROT_MISSING (1<<0) -#define PROT_HTTP (1<<2) -#define PROT_HTTPS (1<<3) -#define PROT_FTP (1<<4) -#define PROT_TELNET (1<<5) -#define PROT_DICT (1<<6) -#define PROT_LDAP (1<<7) -#define PROT_FILE (1<<8) -#define PROT_FTPS (1<<9) -#define PROT_SSL (1<<10) /* protocol requires SSL */ -#define PROT_TFTP (1<<11) -#define PROT_SCP (1<<12) -#define PROT_SFTP (1<<13) - -#define PROT_CLOSEACTION PROT_FTP /* these ones need action before socket - close */ + long connection_id; /* Contains a unique number to make it easier to + track the connections in the log output */ /* 'dns_entry' is the particular host we use. This points to an entry in the DNS cache and it will not get pruned while locked. It gets unlocked in @@ -719,90 +876,81 @@ struct connectdata { within the DNS cache, so this pointer is only valid as long as the DNS cache entry remains locked. It gets unlocked in Curl_done() */ Curl_addrinfo *ip_addr; + Curl_addrinfo *tempaddr[2]; /* for happy eyeballs */ - /* 'ip_addr_str' is the ip_addr data as a human readable malloc()ed string. + /* 'ip_addr_str' is the ip_addr data as a human readable string. It remains available as long as the connection does, which is longer than - the ip_addr itself. Set with Curl_store_ip_addr() when ip_addr has been - set. */ - char *ip_addr_str; + the ip_addr itself. */ + char ip_addr_str[MAX_IPADR_LEN]; + + unsigned int scope; /* address scope for IPv6 */ - char protostr[16]; /* store the protocol string in this buffer */ int socktype; /* SOCK_STREAM or SOCK_DGRAM */ struct hostname host; struct hostname proxy; long port; /* which port to use locally */ - unsigned short remote_port; /* what remote port to connect to, - not the proxy port! */ + int remote_port; /* what remote port to connect to, not the proxy port! */ - long headerbytecount; /* only count received headers */ - long deductheadercount; /* this amount of bytes doesn't count when we check - if anything has been transfered at the end of - a connection. We use this counter to make only - a 100 reply (without a following second response - code) result in a CURLE_GOT_NOTHING error code */ + /* 'primary_ip' and 'primary_port' get filled with peer's numerical + ip address and port number whenever an outgoing connection is + *attempted* from the primary socket to a remote address. When more + than one address is tried for a connection these will hold data + for the last attempt. When the connection is actually established + these are updated with data which comes directly from the socket. */ + + char primary_ip[MAX_IPADR_LEN]; + long primary_port; + + /* 'local_ip' and 'local_port' get filled with local's numerical + ip address and port number whenever an outgoing connection is + **established** from the primary socket to a remote address. */ + + char local_ip[MAX_IPADR_LEN]; + long local_port; char *user; /* user name string, allocated */ char *passwd; /* password string, allocated */ + char *options; /* options string, allocated */ + + char *xoauth2_bearer; /* bearer token for xoauth2, allocated */ char *proxyuser; /* proxy user name string, allocated */ char *proxypasswd; /* proxy password string, allocated */ + curl_proxytype proxytype; /* what kind of proxy that is in use */ + + int httpversion; /* the HTTP version*10 reported by the server */ + int rtspversion; /* the RTSP version*10 reported by the server */ struct timeval now; /* "current" time */ struct timeval created; /* creation time */ curl_socket_t sock[2]; /* two sockets, the second is used for the data transfer when doing FTP */ + curl_socket_t tempsock[2]; /* temporary sockets for happy eyeballs */ + bool sock_accepted[2]; /* TRUE if the socket on this index was created with + accept() */ + Curl_recv *recv[2]; + Curl_send *send[2]; struct ssl_connect_data ssl[2]; /* this is for ssl-stuff */ struct ssl_config_data ssl_config; struct ConnectBits bits; /* various state-flags for this connection */ - /* These two functions MUST be set by the curl_connect() function to be - be protocol dependent */ - CURLcode (*curl_do)(struct connectdata *, bool *done); - Curl_done_func curl_done; - - /* If the curl_do() function is better made in two halves, this - * curl_do_more() function will be called afterwards, if set. For example - * for doing the FTP stuff after the PASV/PORT command. - */ - Curl_do_more_func curl_do_more; - - /* This function *MAY* be set to a protocol-dependent function that is run - * after the connect() and everything is done, as a step in the connection. - * The 'done' pointer points to a bool that should be set to TRUE if the - * function completes before return. If it doesn't complete, the caller - * should call the curl_connecting() function until it is. - */ - CURLcode (*curl_connect)(struct connectdata *, bool *done); - - /* See above. Currently only used for FTP. */ - CURLcode (*curl_connecting)(struct connectdata *, bool *done); - CURLcode (*curl_doing)(struct connectdata *, bool *done); - - /* Called from the multi interface during the PROTOCONNECT phase, and it - should then return a proper fd set */ - int (*curl_proto_getsock)(struct connectdata *conn, - curl_socket_t *socks, - int numsocks); - - /* Called from the multi interface during the DOING phase, and it should - then return a proper fd set */ - int (*curl_doing_getsock)(struct connectdata *conn, - curl_socket_t *socks, - int numsocks); + /* connecttime: when connect() is called on the current IP address. Used to + be able to track when to move on to try next IP - but only when the multi + interface is used. */ + struct timeval connecttime; + /* The two fields below get set in Curl_connecthost */ + int num_addr; /* number of addresses to try to connect to */ + long timeoutms_per_addr; /* how long time in milliseconds to spend on + trying to connect to each IP address */ - /* This function *MAY* be set to a protocol-dependent function that is run - * by the curl_disconnect(), as a step in the disconnection. - */ - CURLcode (*curl_disconnect)(struct connectdata *); + const struct Curl_handler *handler; /* Connection's protocol handler */ + const struct Curl_handler *given; /* The protocol first given */ - /* This function *MAY* be set to a protocol-dependent function that is run - * in the curl_close() function if protocol-specific cleanups are required. - */ - CURLcode (*curl_close)(struct connectdata *); + long ip_version; /* copied from the SessionHandle at creation time */ /**** curl_get() phase fields */ @@ -811,51 +959,62 @@ struct connectdata { well be the same we read from. CURL_SOCKET_BAD disables */ - /** Dynamicly allocated strings, may need to be freed before this **/ - /** struct is killed. **/ + /** Dynamicly allocated strings, MUST be freed before this **/ + /** struct is killed. **/ struct dynamically_allocated_data { - char *proxyuserpwd; /* free later if not NULL! */ - char *uagent; /* free later if not NULL! */ - char *accept_encoding; /* free later if not NULL! */ - char *userpwd; /* free later if not NULL! */ - char *rangeline; /* free later if not NULL! */ - char *ref; /* free later if not NULL! */ - char *host; /* free later if not NULL */ - char *cookiehost; /* free later if not NULL */ + char *proxyuserpwd; + char *uagent; + char *accept_encoding; + char *userpwd; + char *rangeline; + char *ref; + char *host; + char *cookiehost; + char *rtsp_transport; + char *te; /* TE: request header */ } allocptr; - int sec_complete; /* if krb4 is enabled for this connection */ -#ifdef HAVE_KRB4 + int sec_complete; /* if kerberos is enabled for this connection */ +#ifdef HAVE_GSSAPI enum protection_level command_prot; enum protection_level data_prot; enum protection_level request_data_prot; size_t buffer_size; - struct krb4buffer in_buffer, out_buffer; + struct krb5buffer in_buffer; void *app_data; const struct Curl_sec_client_mech *mech; struct sockaddr_in local_addr; #endif +#if defined(USE_WINDOWS_SSPI) /* Consider moving some of the above GSS-API */ + struct kerberos5data krb5; /* variables into the structure definition, */ +#endif /* however, some of them are ftp specific. */ + + /* the two following *_inuse fields are only flags, not counters in any way. + If TRUE it means the channel is in use, and if FALSE it means the channel + is up for grabs by one. */ + bool readchannel_inuse; /* whether the read channel is in use by an easy handle */ bool writechannel_inuse; /* whether the write channel is in use by an easy handle */ - bool is_in_pipeline; /* TRUE if this connection is in a pipeline */ - struct curl_llist *send_pipe; /* List of handles waiting to send on this pipeline */ struct curl_llist *recv_pipe; /* List of handles waiting to read their responses on this pipeline */ - - char master_buffer[BUFSIZE]; /* The master buffer for this connection. */ + char* master_buffer; /* The master buffer allocated on-demand; + used for pipelining. */ size_t read_pos; /* Current read position in the master buffer */ size_t buf_len; /* Length of the buffer?? */ + curl_seek_callback seek_func; /* function that seeks the input */ + void *seek_client; /* pointer to pass to the seek() above */ + /*************** Request - specific items ************/ /* previously this was in the urldata struct */ - curl_read_callback fread; /* function that reads the input */ + curl_read_callback fread_func; /* function that reads the input */ void *fread_in; /* pointer to pass to the fread() above */ struct ntlmdata ntlm; /* NTLM differs from other authentication schemes @@ -863,10 +1022,17 @@ struct connectdata { single requests! */ struct ntlmdata proxyntlm; /* NTLM data for proxy */ +#if defined(USE_NTLM) && defined(NTLM_WB_ENABLED) + /* used for communication with Samba's winbind daemon helper ntlm_auth */ + curl_socket_t ntlm_auth_hlpr_socket; + pid_t ntlm_auth_hlpr_pid; + char* challenge_header; + char* response_header; +#endif + char syserr_buf [256]; /* buffer for Curl_strerror() */ -#if defined(USE_ARES) || defined(USE_THREADING_GETHOSTBYNAME) || \ - defined(USE_THREADING_GETADDRINFO) +#ifdef CURLRES_ASYNCH /* data used for the asynch name resolve callback */ struct Curl_async async; #endif @@ -878,7 +1044,44 @@ struct connectdata { union { struct ftp_conn ftpc; + struct http_conn httpc; + struct ssh_conn sshc; + struct tftp_state_data *tftpc; + struct imap_conn imapc; + struct pop3_conn pop3c; + struct smtp_conn smtpc; + struct rtsp_conn rtspc; + void *generic; /* RTMP and LDAP use this */ } proto; + + int cselect_bits; /* bitmask of socket events */ + int waitfor; /* current READ/WRITE bits to wait for */ + +#if defined(HAVE_GSSAPI) || defined(USE_WINDOWS_SSPI) + int socks5_gssapi_enctype; +#endif + + bool verifypeer; + bool verifyhost; + + /* When this connection is created, store the conditions for the local end + bind. This is stored before the actual bind and before any connection is + made and will serve the purpose of being used for comparison reasons so + that subsequent bound-requested connections aren't accidentally re-using + wrong connections. */ + char *localdev; + unsigned short localport; + int localportrange; + + /* tunnel as in tunnel through a HTTP proxy with CONNECT */ + enum { + TUNNEL_INIT, /* init/default/no tunnel state */ + TUNNEL_CONNECT, /* CONNECT has been sent off */ + TUNNEL_COMPLETE /* CONNECT response received completely */ + } tunnel_state[2]; /* two separate ones to allow FTP */ + struct connectbundle *bundle; /* The bundle we are member of */ + + enum negotiatenpn negnpn; }; /* The end of connectdata. */ @@ -887,22 +1090,40 @@ struct connectdata { * Struct to keep statistical and informational data. */ struct PureInfo { - int httpcode; /* Recent HTTP or FTP response code */ - int httpproxycode; - int httpversion; + int httpcode; /* Recent HTTP, FTP, or RTSP response code */ + int httpproxycode; /* response code from proxy when received separate */ + int httpversion; /* the http version number X.Y = X*10+Y */ long filetime; /* If requested, this is might get set. Set to -1 if the time was unretrievable. We cannot have this of type time_t, since time_t is unsigned on several platforms such as OpenVMS. */ + bool timecond; /* set to TRUE if the time condition didn't match, which + thus made the document NOT get fetched */ long header_size; /* size of read header(s) in bytes */ long request_size; /* the amount of bytes sent in the request(s) */ + unsigned long proxyauthavail; /* what proxy auth types were announced */ + unsigned long httpauthavail; /* what host auth types were announced */ + long numconnects; /* how many new connection did libcurl created */ + char *contenttype; /* the content type of the object */ + char *wouldredirect; /* URL this would've been redirected to if asked to */ - long proxyauthavail; - long httpauthavail; + /* PureInfo members 'conn_primary_ip', 'conn_primary_port', 'conn_local_ip' + and, 'conn_local_port' are copied over from the connectdata struct in + order to allow curl_easy_getinfo() to return this information even when + the session handle is no longer associated with a connection, and also + allow curl_easy_reset() to clear this information from the session handle + without disturbing information which is still alive, and that might be + reused, in the connection cache. */ - long numconnects; /* how many new connection did libcurl created */ + char conn_primary_ip[MAX_IPADR_LEN]; + long conn_primary_port; - char *contenttype; /* the content type of the object */ + char conn_local_ip[MAX_IPADR_LEN]; + long conn_local_port; + + struct curl_certinfo certs; /* info about the certs, only populated in + OpenSSL builds. Asked for with + CURLOPT_CERTINFO / CURLINFO_CERTINFO */ }; @@ -911,8 +1132,8 @@ struct Progress { force redraw at next call */ curl_off_t size_dl; /* total expected size */ curl_off_t size_ul; /* total expected size */ - curl_off_t downloaded; /* transfered so far */ - curl_off_t uploaded; /* transfered so far */ + curl_off_t downloaded; /* transferred so far */ + curl_off_t uploaded; /* transferred so far */ curl_off_t current_speed; /* uses the currently fastest transfer */ @@ -927,12 +1148,15 @@ struct Progress { double t_nslookup; double t_connect; + double t_appconnect; double t_pretransfer; double t_starttransfer; double t_redirect; struct timeval start; struct timeval t_startsingle; + struct timeval t_startop; + struct timeval t_acceptdata; #define CURR_TIME (5+1) /* 6 entries for 5 seconds */ curl_off_t speeder[ CURR_TIME ]; @@ -951,6 +1175,22 @@ typedef enum { HTTPREQ_LAST /* last in list */ } Curl_HttpReq; +typedef enum { + RTSPREQ_NONE, /* first in list */ + RTSPREQ_OPTIONS, + RTSPREQ_DESCRIBE, + RTSPREQ_ANNOUNCE, + RTSPREQ_SETUP, + RTSPREQ_PLAY, + RTSPREQ_PAUSE, + RTSPREQ_TEARDOWN, + RTSPREQ_GET_PARAMETER, + RTSPREQ_SET_PARAMETER, + RTSPREQ_RECORD, + RTSPREQ_RECEIVE, + RTSPREQ_LAST /* last in list */ +} Curl_RtspReq; + /* * Values that are generated, temporary or calculated internally for a * "session handle" must be defined within the 'struct UrlState'. This struct @@ -961,48 +1201,35 @@ typedef enum { * Session-data MUST be put in the connectdata struct and here. */ #define MAX_CURL_USER_LENGTH 256 #define MAX_CURL_PASSWORD_LENGTH 256 -#define MAX_CURL_USER_LENGTH_TXT "255" -#define MAX_CURL_PASSWORD_LENGTH_TXT "255" struct auth { - long want; /* Bitmask set to the authentication methods wanted by the app - (with CURLOPT_HTTPAUTH or CURLOPT_PROXYAUTH). */ - long picked; - long avail; /* bitmask for what the server reports to support for this - resource */ + unsigned long want; /* Bitmask set to the authentication methods wanted by + app (with CURLOPT_HTTPAUTH or CURLOPT_PROXYAUTH). */ + unsigned long picked; + unsigned long avail; /* Bitmask for what the server reports to support for + this resource */ bool done; /* TRUE when the auth phase is done and ready to do the *actual* request */ bool multi; /* TRUE if this is not yet authenticated but within the auth multipass negotiation */ - -}; - -struct conncache { - /* 'connects' will be an allocated array with pointers. If the pointer is - set, it holds an allocated connection. */ - struct connectdata **connects; - long num; /* number of entries of the 'connects' array */ - enum { - CONNCACHE_PRIVATE, /* used for an easy handle alone */ - CONNCACHE_MULTI /* shared within a multi handle */ - } type; + bool iestyle; /* TRUE if digest should be done IE-style or FALSE if it should + be RFC compliant */ }; - struct UrlState { - enum { - Curl_if_none, - Curl_if_easy, - Curl_if_multi - } used_interface; - struct conncache *connc; /* points to the connection cache this handle - uses */ + /* Points to the connection cache */ + struct conncache *conn_cache; + + /* when curl_easy_perform() is called, the multi handle is "owned" by + the easy handle so curl_easy_cleanup() on such an easy handle will + also close the multi handle! */ + bool multi_owned_by_easy; /* buffers to store authentication data in, as parsed from input options */ struct timeval keeps_speed; /* for the progress meter really */ - long lastconnect; /* index of most recent connect or -1 if undefined */ + struct connectdata *lastconnect; /* The last connection, NULL if undefined */ char *headerbuff; /* allocated buffer to store headers in */ size_t headersize; /* size of the allocation */ @@ -1013,17 +1240,18 @@ struct UrlState { bytes / second */ bool this_is_a_follow; /* this is a followed Location: request */ - bool is_in_pipeline; /* Indicates whether this handle is part of a pipeline */ - char *first_host; /* if set, this should be the host name that we will sent authorization to, no else. Used to make Location: following not keep sending user+password... This is strdup() data. */ - - struct curl_ssl_session *session; /* array of 'numsessions' size */ + struct curl_ssl_session *session; /* array of 'max_ssl_sessions' size */ long sessionage; /* number of the most recent session */ - + char *tempwrite; /* allocated buffer to keep data in when a write + callback returns to make the connection paused */ + size_t tempwritesize; /* size of the 'tempwrite' allocated buffer */ + int tempwritetype; /* type of the 'tempwrite' buffer as a bitmask that is + used with Curl_client_write() */ char *scratch; /* huge buffer[BUFSIZE*2] when doing upload CRLF replacing */ bool errorbuf; /* Set to TRUE if the error buffer is already filled in. This must be set to FALSE every time _easy_perform() is @@ -1035,42 +1263,44 @@ struct UrlState { #endif bool allow_port; /* Is set.use_port allowed to take effect or not. This is always set TRUE when curl_easy_perform() is called. */ + struct digestdata digest; /* state data for host Digest auth */ + struct digestdata proxydigest; /* state data for proxy Digest auth */ - struct digestdata digest; - struct digestdata proxydigest; - -#ifdef HAVE_GSSAPI - struct negotiatedata negotiate; +#ifdef USE_SPNEGO + struct negotiatedata negotiate; /* state data for host Negotiate auth */ + struct negotiatedata proxyneg; /* state data for proxy Negotiate auth */ #endif - struct auth authhost; - struct auth authproxy; + struct auth authhost; /* auth details for host */ + struct auth authproxy; /* auth details for proxy */ bool authproblem; /* TRUE if there's some problem authenticating */ -#ifdef USE_ARES - ares_channel areschannel; /* for name resolves */ -#endif + void *resolver; /* resolver state, if it is used in the URL state - + ares_channel f.e. */ #if defined(USE_SSLEAY) && defined(HAVE_OPENSSL_ENGINE_H) ENGINE *engine; #endif /* USE_SSLEAY */ struct timeval expiretime; /* set this with Curl_expire() only */ struct Curl_tree timenode; /* for the splay stuff */ + struct curl_llist *timeoutlist; /* list of pending timeouts */ - /* a place to store the most recenlty set FTP entrypath */ + /* a place to store the most recently set FTP entrypath */ char *most_recent_ftp_entrypath; /* set after initial USER failure, to prevent an authentication loop */ bool ftp_trying_alternative; + int httpversion; /* the lowest HTTP version*10 reported by any server + involved in this request */ bool expect100header; /* TRUE if we added Expect: 100-continue */ bool pipe_broke; /* TRUE if the connection we were pipelined on broke and we need to restart from the beginning */ - bool cancelled; /* TRUE if the request was cancelled */ -#ifndef WIN32 +#if !defined(WIN32) && !defined(MSDOS) && !defined(__EMX__) && \ + !defined(__SYMBIAN32__) /* do FTP line-end conversions on most platforms */ #define CURL_DO_LINEEND_CONV /* for FTP downloads: track CRLF sequences that span blocks */ @@ -1078,14 +1308,27 @@ struct UrlState { /* for FTP downloads: how many CRLFs did we converted to LFs? */ curl_off_t crlf_conversions; #endif - /* If set to non-NULL, there's a connection in a shared connection cache - that uses this handle so we can't kill this SessionHandle just yet but - must keep it around and add it to the list of handles to kill once all - its connections are gone */ - void *shared_conn; - bool closed; /* set to TRUE when curl_easy_cleanup() has been called on this - handle, but it is kept around as mentioned for - shared_conn */ + char *pathbuffer;/* allocated buffer to store the URL's path part in */ + char *path; /* path to use, points to somewhere within the pathbuffer + area */ + bool slash_removed; /* set TRUE if the 'path' points to a path where the + initial URL slash separator has been taken off */ + bool use_range; + bool rangestringalloc; /* the range string is malloc()'ed */ + + char *range; /* range, if used. See README for detailed specification on + this syntax. */ + curl_off_t resume_from; /* continue [ftp] transfer from here */ + + /* This RTSP state information survives requests and connections */ + long rtsp_next_client_CSeq; /* the session's next client CSeq */ + long rtsp_next_server_CSeq; /* the session's next server CSeq */ + long rtsp_CSeq_recv; /* most recent CSeq received */ + + /* if true, force SSL connection retry (workaround for certain servers) */ + bool ssl_connect_retry; + curl_off_t infilesize; /* size of file to upload, -1 means unknown. + Copied from set.filesize at start of operation */ }; @@ -1099,14 +1342,12 @@ struct UrlState { struct DynamicStatic { char *url; /* work URL, copied from UserDefined */ bool url_alloc; /* URL string is malloc()'ed */ - bool url_changed; /* set on CURL_OPT_URL, used to detect if the URL was - changed after the connect phase, as we allow callback - to change it and if so, we reconnect to use the new - URL instead */ char *referer; /* referer string */ bool referer_alloc; /* referer sting is malloc()ed */ struct curl_slist *cookielist; /* list of cookie files set by curl_easy_setopt(COOKIEFILE) calls */ + struct curl_slist *resolve; /* set to point to the set.resolve list when + this should be dealt with in pretransfer */ }; /* @@ -1115,55 +1356,125 @@ struct DynamicStatic { * calculated internally for the "session handle" MUST be defined within the * 'struct UrlState' instead. The only exceptions MUST note the changes in * the 'DynamicStatic' struct. + * Character pointer fields point to dynamic storage, unless otherwise stated. */ -struct Curl_one_easy; /* declared and used only in multi.c */ + struct Curl_multi; /* declared and used only in multi.c */ +enum dupstring { + STRING_CERT, /* client certificate file name */ + STRING_CERT_TYPE, /* format for certificate (default: PEM)*/ + STRING_COOKIE, /* HTTP cookie string to send */ + STRING_COOKIEJAR, /* dump all cookies to this file */ + STRING_CUSTOMREQUEST, /* HTTP/FTP/RTSP request/method to use */ + STRING_DEVICE, /* local network interface/address to use */ + STRING_ENCODING, /* Accept-Encoding string */ + STRING_FTP_ACCOUNT, /* ftp account data */ + STRING_FTP_ALTERNATIVE_TO_USER, /* command to send if USER/PASS fails */ + STRING_FTPPORT, /* port to send with the FTP PORT command */ + STRING_KEY, /* private key file name */ + STRING_KEY_PASSWD, /* plain text private key password */ + STRING_KEY_TYPE, /* format for private key (default: PEM) */ + STRING_KRB_LEVEL, /* krb security level */ + STRING_NETRC_FILE, /* if not NULL, use this instead of trying to find + $HOME/.netrc */ + STRING_COPYPOSTFIELDS, /* if POST, set the fields' values here */ + STRING_PROXY, /* proxy to use */ + STRING_SET_RANGE, /* range, if used */ + STRING_SET_REFERER, /* custom string for the HTTP referer field */ + STRING_SET_URL, /* what original URL to work on */ + STRING_SSL_CAPATH, /* CA directory name (doesn't work on windows) */ + STRING_SSL_CAFILE, /* certificate file to verify peer against */ + STRING_SSL_CIPHER_LIST, /* list of ciphers to use */ + STRING_SSL_EGDSOCKET, /* path to file containing the EGD daemon socket */ + STRING_SSL_RANDOM_FILE, /* path to file containing "random" data */ + STRING_USERAGENT, /* User-Agent string */ + STRING_SSL_CRLFILE, /* crl file to check certificate */ + STRING_SSL_ISSUERCERT, /* issuer cert file to check certificate */ + STRING_USERNAME, /* <username>, if used */ + STRING_PASSWORD, /* <password>, if used */ + STRING_OPTIONS, /* <options>, if used */ + STRING_PROXYUSERNAME, /* Proxy <username>, if used */ + STRING_PROXYPASSWORD, /* Proxy <password>, if used */ + STRING_NOPROXY, /* List of hosts which should not use the proxy, if + used */ + STRING_RTSP_SESSION_ID, /* Session ID to use */ + STRING_RTSP_STREAM_URI, /* Stream URI for this request */ + STRING_RTSP_TRANSPORT, /* Transport for this session */ +#ifdef USE_LIBSSH2 + STRING_SSH_PRIVATE_KEY, /* path to the private key file for auth */ + STRING_SSH_PUBLIC_KEY, /* path to the public key file for auth */ + STRING_SSH_HOST_PUBLIC_KEY_MD5, /* md5 of host public key in ascii hex */ + STRING_SSH_KNOWNHOSTS, /* file name of knownhosts file */ +#endif +#if defined(HAVE_GSSAPI) || defined(USE_WINDOWS_SSPI) + STRING_SOCKS5_GSSAPI_SERVICE, /* GSSAPI service name */ +#endif + STRING_MAIL_FROM, + STRING_MAIL_AUTH, + +#ifdef USE_TLS_SRP + STRING_TLSAUTH_USERNAME, /* TLS auth <username> */ + STRING_TLSAUTH_PASSWORD, /* TLS auth <password> */ +#endif + + STRING_BEARER, /* <bearer>, if used */ + + /* -- end of strings -- */ + STRING_LAST /* not used, just an end-of-list marker */ +}; + struct UserDefined { FILE *err; /* the stderr user data goes here */ void *debugdata; /* the data that will be passed to fdebug */ - char *errorbuffer; /* store failure messages in here */ - char *proxyuserpwd; /* Proxy <user:password>, if used */ + char *errorbuffer; /* (Static) store failure messages in here */ long proxyport; /* If non-zero, use this port number by default. If the proxy string features a ":[port]" that one will override this. */ void *out; /* the fetched file goes here */ void *in; /* the uploaded file is read from here */ void *writeheader; /* write the header to this if non-NULL */ - char *set_url; /* what original URL to work on */ - char *proxy; /* proxy to use */ + void *rtp_out; /* write RTP to this if non-NULL */ long use_port; /* which port to use (when not using default) */ - char *userpwd; /* <user:password>, if used */ - long httpauth; /* what kind of HTTP authentication to use (bitmask) */ - long proxyauth; /* what kind of proxy authentication to use (bitmask) */ - char *set_range; /* range, if used. See README for detailed specification - on this syntax. */ + unsigned long httpauth; /* kind of HTTP authentication to use (bitmask) */ + unsigned long proxyauth; /* kind of proxy authentication to use (bitmask) */ long followlocation; /* as in HTTP Location: */ long maxredirs; /* maximum no. of http(s) redirects to follow, set to -1 for infinity */ - char *set_referer; /* custom string */ + + int keep_post; /* keep POSTs as POSTs after a 30x request; each + bit represents a request, from 301 to 303 */ bool free_referer; /* set TRUE if 'referer' points to a string we allocated */ - char *useragent; /* User-Agent string */ - char *encoding; /* Accept-Encoding string */ - char *postfields; /* if POST, set the fields' values here */ + void *postfields; /* if POST, set the fields' values here */ + curl_seek_callback seek_func; /* function that seeks the input */ curl_off_t postfieldsize; /* if POST, this might have a size to use instead of strlen(), and then the data *may* be binary (contain zero bytes) */ - char *ftpport; /* port to send with the FTP PORT command */ - char *device; /* local network interface/address to use */ unsigned short localport; /* local port number to bind to */ int localportrange; /* number of additional port numbers to test in case the 'localport' one can't be bind()ed */ - curl_write_callback fwrite; /* function that stores the output */ + curl_write_callback fwrite_func; /* function that stores the output */ curl_write_callback fwrite_header; /* function that stores headers */ - curl_read_callback fread; /* function that reads the input */ - curl_progress_callback fprogress; /* function for progress information */ + curl_write_callback fwrite_rtp; /* function that stores interleaved RTP */ + curl_read_callback fread_func; /* function that reads the input */ + int is_fread_set; /* boolean, has read callback been set to non-NULL? */ + int is_fwrite_set; /* boolean, has write callback been set to non-NULL? */ + curl_progress_callback fprogress; /* OLD and deprecated progress callback */ + curl_xferinfo_callback fxferinfo; /* progress callback */ curl_debug_callback fdebug; /* function that write informational data */ - curl_ioctl_callback ioctl; /* function for I/O control */ + curl_ioctl_callback ioctl_func; /* function for I/O control */ curl_sockopt_callback fsockopt; /* function for setting socket options */ void *sockopt_client; /* pointer to pass to the socket options callback */ - + curl_opensocket_callback fopensocket; /* function for checking/translating + the address and opening the + socket */ + void* opensocket_client; + curl_closesocket_callback fclosesocket; /* function for closing the + socket */ + void* closesocket_client; + + void *seek_client; /* pointer to pass to the seek callback */ /* the 3 curl_conv_callback functions below are used on non-ASCII hosts */ /* function to convert from the network encoding: */ curl_conv_callback convfromnetwork; @@ -1174,28 +1485,24 @@ struct UserDefined { void *progress_client; /* pointer to pass to the progress callback */ void *ioctl_client; /* pointer to pass to the ioctl callback */ - long timeout; /* in seconds, 0 means no timeout */ - long connecttimeout; /* in seconds, 0 means no timeout */ - long ftp_response_timeout; /* in seconds, 0 means no timeout */ - curl_off_t infilesize; /* size of file to upload, -1 means unknown */ + long timeout; /* in milliseconds, 0 means no timeout */ + long connecttimeout; /* in milliseconds, 0 means no timeout */ + long accepttimeout; /* in milliseconds, 0 means no timeout */ + long server_response_timeout; /* in milliseconds, 0 means no timeout */ + long tftp_blksize ; /* in bytes, 0 means use default */ + curl_off_t filesize; /* size of file to upload, -1 means unknown */ long low_speed_limit; /* bytes/second */ long low_speed_time; /* number of seconds */ curl_off_t max_send_speed; /* high speed limit in bytes/second for upload */ - curl_off_t max_recv_speed; /* high speed limit in bytes/second for download */ + curl_off_t max_recv_speed; /* high speed limit in bytes/second for + download */ curl_off_t set_resume_from; /* continue [ftp] transfer from here */ - char *cookie; /* HTTP cookie string to send */ struct curl_slist *headers; /* linked list of extra headers */ + struct curl_slist *proxyheaders; /* linked list of extra CONNECT headers */ struct curl_httppost *httppost; /* linked list of POST data */ - char *cert; /* certificate */ - char *cert_type; /* format for certificate (default: PEM) */ - char *key; /* private key */ - char *key_type; /* format for private key (default: PEM) */ - char *key_passwd; /* plain text private key password */ - char *cookiejar; /* dump all cookies to this file */ + bool sep_headers; /* handle host and proxy headers separately */ bool cookiesession; /* new cookie session? */ bool crlf; /* convert crlf on ftp upload(?) */ - char *ftp_account; /* ftp account data */ - char *ftp_alternative_to_user; /* command to send if USER/PASS fails */ struct curl_slist *quote; /* after connection is established */ struct curl_slist *postquote; /* after the transfer */ struct curl_slist *prequote; /* before the transfer, after type */ @@ -1205,79 +1512,71 @@ struct UserDefined { struct curl_slist *source_postquote; /* in 3rd party transfer mode - after the transfer on source host */ struct curl_slist *telnet_options; /* linked list of telnet options */ + struct curl_slist *resolve; /* list of names to add/remove from + DNS cache */ curl_TimeCond timecondition; /* kind of time/date comparison */ time_t timevalue; /* what time to compare with */ Curl_HttpReq httpreq; /* what kind of HTTP request (if any) is this */ - char *customrequest; /* HTTP/FTP request to use */ long httpversion; /* when non-zero, a specific HTTP version requested to be used in the library's request(s) */ - char *auth_host; /* if set, this is the allocated string to the host name - * to which to send the authorization data to, and no other - * host (which location-following otherwise could lead to) - */ - char *krb4_level; /* what security level */ struct ssl_config_data ssl; /* user defined SSL stuff */ - curl_proxytype proxytype; /* what kind of proxy that is in use */ - - int dns_cache_timeout; /* DNS cache timeout */ + long dns_cache_timeout; /* DNS cache timeout */ long buffer_size; /* size of receive buffer to use */ - - char *private_data; /* Private data */ - - struct Curl_one_easy *one_easy; /* When adding an easy handle to a multi - handle, an internal 'Curl_one_easy' - struct is created and this is a pointer - to the particular struct associated with - this SessionHandle */ + void *private_data; /* application-private data */ struct curl_slist *http200aliases; /* linked list of aliases for http200 */ - long ip_version; + long ipver; /* the CURL_IPRESOLVE_* defines in the public header file + 0 - whatever, 1 - v2, 2 - v6 */ curl_off_t max_filesize; /* Maximum file size to download */ - char *source_url; /* for 3rd party transfer */ - char *source_userpwd; /* for 3rd party transfer */ - curl_ftpfile ftp_filemethod; /* how to get to a file when FTP is used */ + int ftp_create_missing_dirs; /* 1 - create directories that don't exist + 2 - the same but also allow MKD to fail once + */ + + curl_sshkeycallback ssh_keyfunc; /* key matching callback */ + void *ssh_keyfunc_userp; /* custom pointer to callback */ + /* Here follows boolean settings that define how to behave during this session. They are STATIC, set by libcurl users or at least initially and they don't change during operations. */ - bool printhost; /* printing host name in debug info */ - bool get_filetime; - bool tunnel_thru_httpproxy; - bool prefer_ascii; /* ASCII rather than binary */ - bool ftp_append; - bool ftp_list_only; - bool ftp_create_missing_dirs; - bool ftp_use_port; - bool hide_progress; - bool http_fail_on_error; - bool http_follow_location; + bool printhost; /* printing host name in debug info */ + bool get_filetime; /* get the time and get of the remote file */ + bool tunnel_thru_httpproxy; /* use CONNECT through a HTTP proxy */ + bool prefer_ascii; /* ASCII rather than binary */ + bool ftp_append; /* append, not overwrite, on upload */ + bool ftp_list_only; /* switch FTP command for listing directories */ + bool ftp_use_port; /* use the FTP PORT command */ + bool hide_progress; /* don't use the progress meter */ + bool http_fail_on_error; /* fail on HTTP error codes >= 300 */ + bool http_follow_location; /* follow HTTP redirects */ + bool http_transfer_encoding; /* request compressed HTTP transfer-encoding */ bool http_disable_hostname_check_before_authentication; bool include_header; /* include received protocol headers in data output */ - bool http_set_referer; + bool http_set_referer; /* is a custom referer used */ bool http_auto_referer; /* set "correct" referer when following location: */ - bool opt_no_body; /* as set with CURLOPT_NO_BODY */ - bool set_port; - bool upload; + bool opt_no_body; /* as set with CURLOPT_NOBODY */ + bool set_port; /* custom port number used */ + bool upload; /* upload request */ enum CURL_NETRC_OPTION use_netrc; /* defined in include/curl.h */ - char *netrc_file; /* if not NULL, use this instead of trying to find - $HOME/.netrc */ - bool verbose; - bool krb4; /* kerberos4 connection requested */ + bool verbose; /* output verbosity */ + bool krb; /* kerberos connection requested */ bool reuse_forbid; /* forbidden to be reused, close after use */ bool reuse_fresh; /* do not re-use an existing connection */ bool ftp_use_epsv; /* if EPSV is to be attempted or not */ bool ftp_use_eprt; /* if EPRT is to be attempted or not */ - bool ftp_use_ccc; /* if CCC is to be attempted or not */ + bool ftp_use_pret; /* if PRET is to be used before PASV or not */ - curl_ftpssl ftp_ssl; /* if AUTH TLS is to be attempted etc */ + curl_usessl use_ssl; /* if AUTH TLS is to be attempted etc, for FTP or + IMAP or POP3 or others! */ curl_ftpauth ftpsslauth; /* what AUTH XXX to be attempted */ + curl_ftpccc ftp_ccc; /* FTP CCC options */ bool no_signal; /* do not use any signal/alarm handler */ bool global_dns_cache; /* subject for future removal */ bool tcp_nodelay; /* whether to enable TCP_NODELAY or not */ @@ -1285,18 +1584,57 @@ struct UserDefined { bool ftp_skip_ip; /* skip the IP address the FTP server passes on to us */ bool connect_only; /* make connection, let application use the socket */ + bool ssl_enable_beast; /* especially allow this flaw for interoperability's + sake*/ long ssh_auth_types; /* allowed SSH auth types */ - char *ssh_public_key; /* the path to the public key file for - authentication */ - char *ssh_private_key; /* the path to the private key file for - authentication */ + bool http_te_skip; /* pass the raw body data to the user, even when + transfer-encoded (chunked, compressed) */ + bool http_ce_skip; /* pass the raw body data to the user, even when + content-encoded (chunked, compressed) */ + long new_file_perms; /* Permissions to use when creating remote files */ + long new_directory_perms; /* Permissions to use when creating remote dirs */ + bool proxy_transfer_mode; /* set transfer mode (;type=<a|i>) when doing FTP + via an HTTP proxy */ + char *str[STRING_LAST]; /* array of strings, pointing to allocated memory */ + unsigned int scope; /* address scope for IPv6 */ + long allowed_protocols; + long redir_protocols; +#if defined(HAVE_GSSAPI) || defined(USE_WINDOWS_SSPI) + long socks5_gssapi_nec; /* flag to support nec socks5 server */ +#endif + struct curl_slist *mail_rcpt; /* linked list of mail recipients */ + bool sasl_ir; /* Enable/disable SASL initial response */ + /* Common RTSP header options */ + Curl_RtspReq rtspreq; /* RTSP request type */ + long rtspversion; /* like httpversion, for RTSP */ + bool wildcardmatch; /* enable wildcard matching */ + curl_chunk_bgn_callback chunk_bgn; /* called before part of transfer + starts */ + curl_chunk_end_callback chunk_end; /* called after part transferring + stopped */ + curl_fnmatch_callback fnmatch; /* callback to decide which file corresponds + to pattern (e.g. if WILDCARDMATCH is on) */ + void *fnmatch_data; + + long gssapi_delegation; /* GSS-API credential delegation, see the + documentation of CURLOPT_GSSAPI_DELEGATION */ + + bool tcp_keepalive; /* use TCP keepalives */ + long tcp_keepidle; /* seconds in idle before sending keepalive probe */ + long tcp_keepintvl; /* seconds between TCP keepalive probes */ + + size_t maxconnects; /* Max idle connections in the connection cache */ + + bool ssl_enable_npn; /* TLS NPN extension? */ + bool ssl_enable_alpn; /* TLS ALPN extension? */ + + long expect_100_timeout; /* in milliseconds */ }; struct Names { struct curl_hash *hostcache; enum { HCACHE_NONE, /* not pointing to anything */ - HCACHE_PRIVATE, /* points to our own */ HCACHE_GLOBAL, /* points to the (shrug) global one */ HCACHE_MULTI, /* points to a shared one in the multi handle */ HCACHE_SHARED /* points to a shared one in a shared object */ @@ -1314,19 +1652,46 @@ struct Names { */ struct SessionHandle { + /* first, two fields for the linked list of these */ + struct SessionHandle *next; + struct SessionHandle *prev; + + struct connectdata *easy_conn; /* the "unit's" connection */ + + CURLMstate mstate; /* the handle's state */ + CURLcode result; /* previous result */ + + struct Curl_message msg; /* A single posted message. */ + + /* Array with the plain socket numbers this handle takes care of, in no + particular order. Note that all sockets are added to the sockhash, where + the state etc are also kept. This array is mostly used to detect when a + socket is to be removed from the hash. See singlesocket(). */ + curl_socket_t sockets[MAX_SOCKSPEREASYHANDLE]; + int numsocks; + struct Names dns; struct Curl_multi *multi; /* if non-NULL, points to the multi handle - struct to which this "belongs" */ + struct to which this "belongs" when used by + the multi interface */ + struct Curl_multi *multi_easy; /* if non-NULL, points to the multi handle + struct to which this "belongs" when used + by the easy interface */ struct Curl_share *share; /* Share, handles global variable mutexing */ - struct HandleData reqdata; /* Request-specific data */ + struct SingleRequest req; /* Request-specific data */ struct UserDefined set; /* values set by the libcurl user */ struct DynamicStatic change; /* possibly modified userdefined data */ - - struct CookieInfo *cookies; /* the cookies, read from files and servers */ + struct CookieInfo *cookies; /* the cookies, read from files and servers. + NOTE that the 'cookie' field in the + UserDefined struct defines if the "engine" + is to be used or not. */ struct Progress progress; /* for all the progress meter data */ struct UrlState state; /* struct for fields used for state info and other dynamic purposes */ + struct WildcardData wildcard; /* wildcard download state info */ struct PureInfo info; /* stats, reports and info data */ + struct curl_tlssessioninfo tsi; /* Information about the TLS session, only + valid after a client has asked for it */ #if defined(CURL_DOES_CONVERSIONS) && defined(HAVE_ICONV) iconv_t outbound_cd; /* for translating to the network encoding */ iconv_t inbound_cd; /* for translating from the network encoding */ @@ -1337,4 +1702,4 @@ struct SessionHandle { #define LIBCURL_NAME "libcurl" -#endif +#endif /* HEADER_CURL_URLDATA_H */ |