diff options
Diffstat (limited to 'Utilities/cmcurl/lib/vauth/digest_sspi.c')
| -rw-r--r-- | Utilities/cmcurl/lib/vauth/digest_sspi.c | 533 |
1 files changed, 533 insertions, 0 deletions
diff --git a/Utilities/cmcurl/lib/vauth/digest_sspi.c b/Utilities/cmcurl/lib/vauth/digest_sspi.c new file mode 100644 index 0000000..6a7315e --- /dev/null +++ b/Utilities/cmcurl/lib/vauth/digest_sspi.c @@ -0,0 +1,533 @@ +/*************************************************************************** + * _ _ ____ _ + * Project ___| | | | _ \| | + * / __| | | | |_) | | + * | (__| |_| | _ <| |___ + * \___|\___/|_| \_\_____| + * + * Copyright (C) 2014 - 2016, Steve Holme, <steve_holme@hotmail.com>. + * Copyright (C) 2015, Daniel Stenberg, <daniel@haxx.se>, et al. + * + * This software is licensed as described in the file COPYING, which + * you should have received as part of this distribution. The terms + * are also available at https://curl.haxx.se/docs/copyright.html. + * + * You may opt to use, copy, modify, merge, publish, distribute and/or sell + * copies of the Software, and permit persons to whom the Software is + * furnished to do so, under the terms of the COPYING file. + * + * This software is distributed on an "AS IS" basis, WITHOUT WARRANTY OF ANY + * KIND, either express or implied. + * + * RFC2831 DIGEST-MD5 authentication + * + ***************************************************************************/ + +#include "curl_setup.h" + +#if defined(USE_WINDOWS_SSPI) && !defined(CURL_DISABLE_CRYPTO_AUTH) + +#include <curl/curl.h> + +#include "vauth/vauth.h" +#include "vauth/digest.h" +#include "urldata.h" +#include "curl_base64.h" +#include "warnless.h" +#include "curl_multibyte.h" +#include "sendf.h" +#include "strdup.h" +#include "rawstr.h" + +/* The last #include files should be: */ +#include "curl_memory.h" +#include "memdebug.h" + +/* + * Curl_auth_create_digest_md5_message() + * + * This is used to generate an already encoded DIGEST-MD5 response message + * ready for sending to the recipient. + * + * Parameters: + * + * data [in] - The session handle. + * chlg64 [in] - The base64 encoded challenge message. + * userp [in] - The user name in the format User or Domain\User. + * passdwp [in] - The user's password. + * service [in] - The service type such as http, smtp, pop or imap. + * outptr [in/out] - The address where a pointer to newly allocated memory + * holding the result will be stored upon completion. + * outlen [out] - The length of the output message. + * + * Returns CURLE_OK on success. + */ +CURLcode Curl_auth_create_digest_md5_message(struct Curl_easy *data, + const char *chlg64, + const char *userp, + const char *passwdp, + const char *service, + char **outptr, size_t *outlen) +{ + CURLcode result = CURLE_OK; + TCHAR *spn = NULL; + size_t chlglen = 0; + size_t token_max = 0; + unsigned char *input_token = NULL; + unsigned char *output_token = NULL; + CredHandle credentials; + CtxtHandle context; + PSecPkgInfo SecurityPackage; + SEC_WINNT_AUTH_IDENTITY identity; + SEC_WINNT_AUTH_IDENTITY *p_identity; + SecBuffer chlg_buf; + SecBuffer resp_buf; + SecBufferDesc chlg_desc; + SecBufferDesc resp_desc; + SECURITY_STATUS status; + unsigned long attrs; + TimeStamp expiry; /* For Windows 9x compatibility of SSPI calls */ + + /* Decode the base-64 encoded challenge message */ + if(strlen(chlg64) && *chlg64 != '=') { + result = Curl_base64_decode(chlg64, &input_token, &chlglen); + if(result) + return result; + } + + /* Ensure we have a valid challenge message */ + if(!input_token) { + infof(data, "DIGEST-MD5 handshake failure (empty challenge message)\n"); + + return CURLE_BAD_CONTENT_ENCODING; + } + + /* Query the security package for DigestSSP */ + status = s_pSecFn->QuerySecurityPackageInfo((TCHAR *) TEXT(SP_NAME_DIGEST), + &SecurityPackage); + if(status != SEC_E_OK) { + free(input_token); + + return CURLE_NOT_BUILT_IN; + } + + token_max = SecurityPackage->cbMaxToken; + + /* Release the package buffer as it is not required anymore */ + s_pSecFn->FreeContextBuffer(SecurityPackage); + + /* Allocate our response buffer */ + output_token = malloc(token_max); + if(!output_token) { + free(input_token); + + return CURLE_OUT_OF_MEMORY; + } + + /* Generate our SPN */ + spn = Curl_auth_build_spn(service, data->easy_conn->host.name, NULL); + if(!spn) { + free(output_token); + free(input_token); + + return CURLE_OUT_OF_MEMORY; + } + + if(userp && *userp) { + /* Populate our identity structure */ + result = Curl_create_sspi_identity(userp, passwdp, &identity); + if(result) { + free(spn); + free(output_token); + free(input_token); + + return result; + } + + /* Allow proper cleanup of the identity structure */ + p_identity = &identity; + } + else + /* Use the current Windows user */ + p_identity = NULL; + + /* Acquire our credentials handle */ + status = s_pSecFn->AcquireCredentialsHandle(NULL, + (TCHAR *) TEXT(SP_NAME_DIGEST), + SECPKG_CRED_OUTBOUND, NULL, + p_identity, NULL, NULL, + &credentials, &expiry); + + if(status != SEC_E_OK) { + Curl_sspi_free_identity(p_identity); + free(spn); + free(output_token); + free(input_token); + + return CURLE_LOGIN_DENIED; + } + + /* Setup the challenge "input" security buffer */ + chlg_desc.ulVersion = SECBUFFER_VERSION; + chlg_desc.cBuffers = 1; + chlg_desc.pBuffers = &chlg_buf; + chlg_buf.BufferType = SECBUFFER_TOKEN; + chlg_buf.pvBuffer = input_token; + chlg_buf.cbBuffer = curlx_uztoul(chlglen); + + /* Setup the response "output" security buffer */ + resp_desc.ulVersion = SECBUFFER_VERSION; + resp_desc.cBuffers = 1; + resp_desc.pBuffers = &resp_buf; + resp_buf.BufferType = SECBUFFER_TOKEN; + resp_buf.pvBuffer = output_token; + resp_buf.cbBuffer = curlx_uztoul(token_max); + + /* Generate our response message */ + status = s_pSecFn->InitializeSecurityContext(&credentials, NULL, spn, + 0, 0, 0, &chlg_desc, 0, + &context, &resp_desc, &attrs, + &expiry); + + if(status == SEC_I_COMPLETE_NEEDED || + status == SEC_I_COMPLETE_AND_CONTINUE) + s_pSecFn->CompleteAuthToken(&credentials, &resp_desc); + else if(status != SEC_E_OK && status != SEC_I_CONTINUE_NEEDED) { + s_pSecFn->FreeCredentialsHandle(&credentials); + Curl_sspi_free_identity(p_identity); + free(spn); + free(output_token); + free(input_token); + + return CURLE_RECV_ERROR; + } + + /* Base64 encode the response */ + result = Curl_base64_encode(data, (char *) output_token, resp_buf.cbBuffer, + outptr, outlen); + + /* Free our handles */ + s_pSecFn->DeleteSecurityContext(&context); + s_pSecFn->FreeCredentialsHandle(&credentials); + + /* Free the identity structure */ + Curl_sspi_free_identity(p_identity); + + /* Free the SPN */ + free(spn); + + /* Free the response buffer */ + free(output_token); + + /* Free the decoded challenge message */ + free(input_token); + + return result; +} + +/* + * Curl_override_sspi_http_realm() + * + * This is used to populate the domain in a SSPI identity structure + * The realm is extracted from the challenge message and used as the + * domain if it is not already explicitly set. + * + * Parameters: + * + * chlg [in] - The challenge message. + * identity [in/out] - The identity structure. + * + * Returns CURLE_OK on success. + */ +CURLcode Curl_override_sspi_http_realm(const char *chlg, + SEC_WINNT_AUTH_IDENTITY *identity) +{ + xcharp_u domain, dup_domain; + + /* If domain is blank or unset, check challenge message for realm */ + if(!identity->Domain || !identity->DomainLength) { + for(;;) { + char value[DIGEST_MAX_VALUE_LENGTH]; + char content[DIGEST_MAX_CONTENT_LENGTH]; + + /* Pass all additional spaces here */ + while(*chlg && ISSPACE(*chlg)) + chlg++; + + /* Extract a value=content pair */ + if(Curl_auth_digest_get_pair(chlg, value, content, &chlg)) { + if(Curl_raw_equal(value, "realm")) { + + /* Setup identity's domain and length */ + domain.tchar_ptr = Curl_convert_UTF8_to_tchar((char *) content); + if(!domain.tchar_ptr) + return CURLE_OUT_OF_MEMORY; + + dup_domain.tchar_ptr = _tcsdup(domain.tchar_ptr); + if(!dup_domain.tchar_ptr) { + Curl_unicodefree(domain.tchar_ptr); + return CURLE_OUT_OF_MEMORY; + } + + free(identity->Domain); + identity->Domain = dup_domain.tbyte_ptr; + identity->DomainLength = curlx_uztoul(_tcslen(dup_domain.tchar_ptr)); + dup_domain.tchar_ptr = NULL; + + Curl_unicodefree(domain.tchar_ptr); + } + else { + /* Unknown specifier, ignore it! */ + } + } + else + break; /* We're done here */ + + /* Pass all additional spaces here */ + while(*chlg && ISSPACE(*chlg)) + chlg++; + + /* Allow the list to be comma-separated */ + if(',' == *chlg) + chlg++; + } + } + + return CURLE_OK; +} + +/* + * Curl_auth_decode_digest_http_message() + * + * This is used to decode a HTTP DIGEST challenge message into the seperate + * attributes. + * + * Parameters: + * + * chlg [in] - The challenge message. + * digest [in/out] - The digest data struct being used and modified. + * + * Returns CURLE_OK on success. + */ +CURLcode Curl_auth_decode_digest_http_message(const char *chlg, + struct digestdata *digest) +{ + size_t chlglen = strlen(chlg); + + /* We had an input token before and we got another one now. This means we + provided bad credentials in the previous request. */ + if(digest->input_token) + return CURLE_BAD_CONTENT_ENCODING; + + /* Simply store the challenge for use later */ + digest->input_token = (BYTE *) Curl_memdup(chlg, chlglen); + if(!digest->input_token) + return CURLE_OUT_OF_MEMORY; + + digest->input_token_len = chlglen; + + return CURLE_OK; +} + +/* + * Curl_auth_create_digest_http_message() + * + * This is used to generate a HTTP DIGEST response message ready for sending + * to the recipient. + * + * Parameters: + * + * data [in] - The session handle. + * userp [in] - The user name in the format User or Domain\User. + * passdwp [in] - The user's password. + * request [in] - The HTTP request. + * uripath [in] - The path of the HTTP uri. + * digest [in/out] - The digest data struct being used and modified. + * outptr [in/out] - The address where a pointer to newly allocated memory + * holding the result will be stored upon completion. + * outlen [out] - The length of the output message. + * + * Returns CURLE_OK on success. + */ +CURLcode Curl_auth_create_digest_http_message(struct Curl_easy *data, + const char *userp, + const char *passwdp, + const unsigned char *request, + const unsigned char *uripath, + struct digestdata *digest, + char **outptr, size_t *outlen) +{ + size_t token_max; + CredHandle credentials; + CtxtHandle context; + char *resp; + BYTE *output_token; + PSecPkgInfo SecurityPackage; + SEC_WINNT_AUTH_IDENTITY identity; + SEC_WINNT_AUTH_IDENTITY *p_identity; + SecBuffer chlg_buf[3]; + SecBuffer resp_buf; + SecBufferDesc chlg_desc; + SecBufferDesc resp_desc; + SECURITY_STATUS status; + unsigned long attrs; + TimeStamp expiry; /* For Windows 9x compatibility of SSPI calls */ + TCHAR *spn; + + (void) data; + + /* Query the security package for DigestSSP */ + status = s_pSecFn->QuerySecurityPackageInfo((TCHAR *) TEXT(SP_NAME_DIGEST), + &SecurityPackage); + if(status != SEC_E_OK) + return CURLE_NOT_BUILT_IN; + + token_max = SecurityPackage->cbMaxToken; + + /* Release the package buffer as it is not required anymore */ + s_pSecFn->FreeContextBuffer(SecurityPackage); + + if(userp && *userp) { + /* Populate our identity structure */ + if(Curl_create_sspi_identity(userp, passwdp, &identity)) + return CURLE_OUT_OF_MEMORY; + + /* Populate our identity domain */ + if(Curl_override_sspi_http_realm((const char*) digest->input_token, + &identity)) + return CURLE_OUT_OF_MEMORY; + + /* Allow proper cleanup of the identity structure */ + p_identity = &identity; + } + else + /* Use the current Windows user */ + p_identity = NULL; + + /* Acquire our credentials handle */ + status = s_pSecFn->AcquireCredentialsHandle(NULL, + (TCHAR *) TEXT(SP_NAME_DIGEST), + SECPKG_CRED_OUTBOUND, NULL, + p_identity, NULL, NULL, + &credentials, &expiry); + if(status != SEC_E_OK) { + Curl_sspi_free_identity(p_identity); + + return CURLE_LOGIN_DENIED; + } + + /* Allocate the output buffer according to the max token size as indicated + by the security package */ + output_token = malloc(token_max); + if(!output_token) { + s_pSecFn->FreeCredentialsHandle(&credentials); + + Curl_sspi_free_identity(p_identity); + + return CURLE_OUT_OF_MEMORY; + } + + /* Setup the challenge "input" security buffer if present */ + chlg_desc.ulVersion = SECBUFFER_VERSION; + chlg_desc.cBuffers = 3; + chlg_desc.pBuffers = chlg_buf; + chlg_buf[0].BufferType = SECBUFFER_TOKEN; + chlg_buf[0].pvBuffer = digest->input_token; + chlg_buf[0].cbBuffer = curlx_uztoul(digest->input_token_len); + chlg_buf[1].BufferType = SECBUFFER_PKG_PARAMS; + chlg_buf[1].pvBuffer = (void *) request; + chlg_buf[1].cbBuffer = curlx_uztoul(strlen((const char *) request)); + chlg_buf[2].BufferType = SECBUFFER_PKG_PARAMS; + chlg_buf[2].pvBuffer = NULL; + chlg_buf[2].cbBuffer = 0; + + /* Setup the response "output" security buffer */ + resp_desc.ulVersion = SECBUFFER_VERSION; + resp_desc.cBuffers = 1; + resp_desc.pBuffers = &resp_buf; + resp_buf.BufferType = SECBUFFER_TOKEN; + resp_buf.pvBuffer = output_token; + resp_buf.cbBuffer = curlx_uztoul(token_max); + + spn = Curl_convert_UTF8_to_tchar((char *) uripath); + if(!spn) { + s_pSecFn->FreeCredentialsHandle(&credentials); + + Curl_sspi_free_identity(p_identity); + free(output_token); + + return CURLE_OUT_OF_MEMORY; + } + + /* Generate our reponse message */ + status = s_pSecFn->InitializeSecurityContext(&credentials, NULL, + spn, + ISC_REQ_USE_HTTP_STYLE, 0, 0, + &chlg_desc, 0, &context, + &resp_desc, &attrs, &expiry); + Curl_unicodefree(spn); + + if(status == SEC_I_COMPLETE_NEEDED || + status == SEC_I_COMPLETE_AND_CONTINUE) + s_pSecFn->CompleteAuthToken(&credentials, &resp_desc); + else if(status != SEC_E_OK && status != SEC_I_CONTINUE_NEEDED) { + s_pSecFn->FreeCredentialsHandle(&credentials); + + Curl_sspi_free_identity(p_identity); + free(output_token); + + return CURLE_OUT_OF_MEMORY; + } + + resp = malloc(resp_buf.cbBuffer + 1); + if(!resp) { + s_pSecFn->DeleteSecurityContext(&context); + s_pSecFn->FreeCredentialsHandle(&credentials); + + Curl_sspi_free_identity(p_identity); + free(output_token); + + return CURLE_OUT_OF_MEMORY; + } + + /* Copy the generated reponse */ + memcpy(resp, resp_buf.pvBuffer, resp_buf.cbBuffer); + resp[resp_buf.cbBuffer] = 0x00; + + /* Return the response */ + *outptr = resp; + *outlen = resp_buf.cbBuffer; + + /* Free our handles */ + s_pSecFn->DeleteSecurityContext(&context); + s_pSecFn->FreeCredentialsHandle(&credentials); + + /* Free the identity structure */ + Curl_sspi_free_identity(p_identity); + + /* Free the response buffer */ + free(output_token); + + return CURLE_OK; +} + +/* + * Curl_auth_digest_cleanup() + * + * This is used to clean up the digest specific data. + * + * Parameters: + * + * digest [in/out] - The digest data struct being cleaned up. + * + */ +void Curl_auth_digest_cleanup(struct digestdata *digest) +{ + /* Free the input token */ + Curl_safefree(digest->input_token); + + /* Reset any variables */ + digest->input_token_len = 0; +} + +#endif /* USE_WINDOWS_SSPI && !CURL_DISABLE_CRYPTO_AUTH */ |