diff options
Diffstat (limited to 'Utilities/cmcurl/lib/vtls/cyassl.c')
| -rw-r--r-- | Utilities/cmcurl/lib/vtls/cyassl.c | 1028 |
1 files changed, 1028 insertions, 0 deletions
diff --git a/Utilities/cmcurl/lib/vtls/cyassl.c b/Utilities/cmcurl/lib/vtls/cyassl.c new file mode 100644 index 0000000..e10398a --- /dev/null +++ b/Utilities/cmcurl/lib/vtls/cyassl.c @@ -0,0 +1,1028 @@ +/*************************************************************************** + * _ _ ____ _ + * Project ___| | | | _ \| | + * / __| | | | |_) | | + * | (__| |_| | _ <| |___ + * \___|\___/|_| \_\_____| + * + * Copyright (C) 1998 - 2018, Daniel Stenberg, <daniel@haxx.se>, et al. + * + * This software is licensed as described in the file COPYING, which + * you should have received as part of this distribution. The terms + * are also available at https://curl.haxx.se/docs/copyright.html. + * + * You may opt to use, copy, modify, merge, publish, distribute and/or sell + * copies of the Software, and permit persons to whom the Software is + * furnished to do so, under the terms of the COPYING file. + * + * This software is distributed on an "AS IS" basis, WITHOUT WARRANTY OF ANY + * KIND, either express or implied. + * + ***************************************************************************/ + +/* + * Source file for all CyaSSL-specific code for the TLS/SSL layer. No code + * but vtls.c should ever call or use these functions. + * + */ + +#include "curl_setup.h" + +#ifdef USE_CYASSL + +#define WOLFSSL_OPTIONS_IGNORE_SYS +/* CyaSSL's version.h, which should contain only the version, should come +before all other CyaSSL includes and be immediately followed by build config +aka options.h. https://curl.haxx.se/mail/lib-2015-04/0069.html */ +#include <cyassl/version.h> +#if defined(HAVE_CYASSL_OPTIONS_H) && (LIBCYASSL_VERSION_HEX > 0x03004008) +#if defined(CYASSL_API) || defined(WOLFSSL_API) +/* Safety measure. If either is defined some API include was already included +and that's a problem since options.h hasn't been included yet. */ +#error "CyaSSL API was included before the CyaSSL build options." +#endif +#include <cyassl/options.h> +#endif + +/* To determine what functions are available we rely on one or both of: + - the user's options.h generated by CyaSSL/wolfSSL + - the symbols detected by curl's configure + Since they are markedly different from one another, and one or the other may + not be available, we do some checking below to bring things in sync. */ + +/* HAVE_ALPN is wolfSSL's build time symbol for enabling ALPN in options.h. */ +#ifndef HAVE_ALPN +#ifdef HAVE_WOLFSSL_USEALPN +#define HAVE_ALPN +#endif +#endif + +/* WOLFSSL_ALLOW_SSLV3 is wolfSSL's build time symbol for enabling SSLv3 in + options.h, but is only seen in >= 3.6.6 since that's when they started + disabling SSLv3 by default. */ +#ifndef WOLFSSL_ALLOW_SSLV3 +#if (LIBCYASSL_VERSION_HEX < 0x03006006) || \ + defined(HAVE_WOLFSSLV3_CLIENT_METHOD) +#define WOLFSSL_ALLOW_SSLV3 +#endif +#endif + +/* HAVE_SUPPORTED_CURVES is wolfSSL's build time symbol for enabling the ECC + supported curve extension in options.h. Note ECC is enabled separately. */ +#ifndef HAVE_SUPPORTED_CURVES +#if defined(HAVE_CYASSL_CTX_USESUPPORTEDCURVE) || \ + defined(HAVE_WOLFSSL_CTX_USESUPPORTEDCURVE) +#define HAVE_SUPPORTED_CURVES +#endif +#endif + +#include <limits.h> + +#include "urldata.h" +#include "sendf.h" +#include "inet_pton.h" +#include "vtls.h" +#include "parsedate.h" +#include "connect.h" /* for the connect timeout */ +#include "select.h" +#include "strcase.h" +#include "x509asn1.h" +#include "curl_printf.h" + +#include <cyassl/openssl/ssl.h> +#include <cyassl/ssl.h> +#ifdef HAVE_CYASSL_ERROR_SSL_H +#include <cyassl/error-ssl.h> +#else +#include <cyassl/error.h> +#endif +#include <cyassl/ctaocrypt/random.h> +#include <cyassl/ctaocrypt/sha256.h> + +#include "cyassl.h" + +/* The last #include files should be: */ +#include "curl_memory.h" +#include "memdebug.h" + +#if LIBCYASSL_VERSION_HEX < 0x02007002 /* < 2.7.2 */ +#define CYASSL_MAX_ERROR_SZ 80 +#endif + +/* KEEP_PEER_CERT is a product of the presence of build time symbol + OPENSSL_EXTRA without NO_CERTS, depending on the version. KEEP_PEER_CERT is + in wolfSSL's settings.h, and the latter two are build time symbols in + options.h. */ +#ifndef KEEP_PEER_CERT +#if defined(HAVE_CYASSL_GET_PEER_CERTIFICATE) || \ + defined(HAVE_WOLFSSL_GET_PEER_CERTIFICATE) || \ + (defined(OPENSSL_EXTRA) && !defined(NO_CERTS)) +#define KEEP_PEER_CERT +#endif +#endif + +struct ssl_backend_data { + SSL_CTX* ctx; + SSL* handle; +}; + +#define BACKEND connssl->backend + +static Curl_recv cyassl_recv; +static Curl_send cyassl_send; + + +static int do_file_type(const char *type) +{ + if(!type || !type[0]) + return SSL_FILETYPE_PEM; + if(strcasecompare(type, "PEM")) + return SSL_FILETYPE_PEM; + if(strcasecompare(type, "DER")) + return SSL_FILETYPE_ASN1; + return -1; +} + +/* + * This function loads all the client/CA certificates and CRLs. Setup the TLS + * layer and do all necessary magic. + */ +static CURLcode +cyassl_connect_step1(struct connectdata *conn, + int sockindex) +{ + char error_buffer[CYASSL_MAX_ERROR_SZ]; + char *ciphers; + struct Curl_easy *data = conn->data; + struct ssl_connect_data* connssl = &conn->ssl[sockindex]; + SSL_METHOD* req_method = NULL; + curl_socket_t sockfd = conn->sock[sockindex]; +#ifdef HAVE_SNI + bool sni = FALSE; +#define use_sni(x) sni = (x) +#else +#define use_sni(x) Curl_nop_stmt +#endif + + if(connssl->state == ssl_connection_complete) + return CURLE_OK; + + if(SSL_CONN_CONFIG(version_max) != CURL_SSLVERSION_MAX_NONE) { + failf(data, "CyaSSL does not support to set maximum SSL/TLS version"); + return CURLE_SSL_CONNECT_ERROR; + } + + /* check to see if we've been told to use an explicit SSL/TLS version */ + switch(SSL_CONN_CONFIG(version)) { + case CURL_SSLVERSION_DEFAULT: + case CURL_SSLVERSION_TLSv1: +#if LIBCYASSL_VERSION_HEX >= 0x03003000 /* >= 3.3.0 */ + /* minimum protocol version is set later after the CTX object is created */ + req_method = SSLv23_client_method(); +#else + infof(data, "CyaSSL <3.3.0 cannot be configured to use TLS 1.0-1.2, " + "TLS 1.0 is used exclusively\n"); + req_method = TLSv1_client_method(); +#endif + use_sni(TRUE); + break; + case CURL_SSLVERSION_TLSv1_0: +#ifdef WOLFSSL_ALLOW_TLSV10 + req_method = TLSv1_client_method(); + use_sni(TRUE); +#else + failf(data, "CyaSSL does not support TLS 1.0"); + return CURLE_NOT_BUILT_IN; +#endif + break; + case CURL_SSLVERSION_TLSv1_1: + req_method = TLSv1_1_client_method(); + use_sni(TRUE); + break; + case CURL_SSLVERSION_TLSv1_2: + req_method = TLSv1_2_client_method(); + use_sni(TRUE); + break; + case CURL_SSLVERSION_TLSv1_3: +#ifdef WOLFSSL_TLS13 + req_method = wolfTLSv1_3_client_method(); + use_sni(TRUE); + break; +#else + failf(data, "CyaSSL: TLS 1.3 is not yet supported"); + return CURLE_SSL_CONNECT_ERROR; +#endif + case CURL_SSLVERSION_SSLv3: +#ifdef WOLFSSL_ALLOW_SSLV3 + req_method = SSLv3_client_method(); + use_sni(FALSE); +#else + failf(data, "CyaSSL does not support SSLv3"); + return CURLE_NOT_BUILT_IN; +#endif + break; + case CURL_SSLVERSION_SSLv2: + failf(data, "CyaSSL does not support SSLv2"); + return CURLE_SSL_CONNECT_ERROR; + default: + failf(data, "Unrecognized parameter passed via CURLOPT_SSLVERSION"); + return CURLE_SSL_CONNECT_ERROR; + } + + if(!req_method) { + failf(data, "SSL: couldn't create a method!"); + return CURLE_OUT_OF_MEMORY; + } + + if(BACKEND->ctx) + SSL_CTX_free(BACKEND->ctx); + BACKEND->ctx = SSL_CTX_new(req_method); + + if(!BACKEND->ctx) { + failf(data, "SSL: couldn't create a context!"); + return CURLE_OUT_OF_MEMORY; + } + + switch(SSL_CONN_CONFIG(version)) { + case CURL_SSLVERSION_DEFAULT: + case CURL_SSLVERSION_TLSv1: +#if LIBCYASSL_VERSION_HEX > 0x03004006 /* > 3.4.6 */ + /* Versions 3.3.0 to 3.4.6 we know the minimum protocol version is whatever + minimum version of TLS was built in and at least TLS 1.0. For later library + versions that could change (eg TLS 1.0 built in but defaults to TLS 1.1) so + we have this short circuit evaluation to find the minimum supported TLS + version. We use wolfSSL_CTX_SetMinVersion and not CyaSSL_SetMinVersion + because only the former will work before the user's CTX callback is called. + */ + if((wolfSSL_CTX_SetMinVersion(BACKEND->ctx, WOLFSSL_TLSV1) != 1) && + (wolfSSL_CTX_SetMinVersion(BACKEND->ctx, WOLFSSL_TLSV1_1) != 1) && + (wolfSSL_CTX_SetMinVersion(BACKEND->ctx, WOLFSSL_TLSV1_2) != 1) +#ifdef WOLFSSL_TLS13 + && (wolfSSL_CTX_SetMinVersion(BACKEND->ctx, WOLFSSL_TLSV1_3) != 1) +#endif + ) { + failf(data, "SSL: couldn't set the minimum protocol version"); + return CURLE_SSL_CONNECT_ERROR; + } +#endif + break; + } + + ciphers = SSL_CONN_CONFIG(cipher_list); + if(ciphers) { + if(!SSL_CTX_set_cipher_list(BACKEND->ctx, ciphers)) { + failf(data, "failed setting cipher list: %s", ciphers); + return CURLE_SSL_CIPHER; + } + infof(data, "Cipher selection: %s\n", ciphers); + } + +#ifndef NO_FILESYSTEM + /* load trusted cacert */ + if(SSL_CONN_CONFIG(CAfile)) { + if(1 != SSL_CTX_load_verify_locations(BACKEND->ctx, + SSL_CONN_CONFIG(CAfile), + SSL_CONN_CONFIG(CApath))) { + if(SSL_CONN_CONFIG(verifypeer)) { + /* Fail if we insist on successfully verifying the server. */ + failf(data, "error setting certificate verify locations:\n" + " CAfile: %s\n CApath: %s", + SSL_CONN_CONFIG(CAfile)? + SSL_CONN_CONFIG(CAfile): "none", + SSL_CONN_CONFIG(CApath)? + SSL_CONN_CONFIG(CApath) : "none"); + return CURLE_SSL_CACERT_BADFILE; + } + else { + /* Just continue with a warning if no strict certificate + verification is required. */ + infof(data, "error setting certificate verify locations," + " continuing anyway:\n"); + } + } + else { + /* Everything is fine. */ + infof(data, "successfully set certificate verify locations:\n"); + } + infof(data, + " CAfile: %s\n" + " CApath: %s\n", + SSL_CONN_CONFIG(CAfile) ? SSL_CONN_CONFIG(CAfile): + "none", + SSL_CONN_CONFIG(CApath) ? SSL_CONN_CONFIG(CApath): + "none"); + } + + /* Load the client certificate, and private key */ + if(SSL_SET_OPTION(cert) && SSL_SET_OPTION(key)) { + int file_type = do_file_type(SSL_SET_OPTION(cert_type)); + + if(SSL_CTX_use_certificate_file(BACKEND->ctx, SSL_SET_OPTION(cert), + file_type) != 1) { + failf(data, "unable to use client certificate (no key or wrong pass" + " phrase?)"); + return CURLE_SSL_CONNECT_ERROR; + } + + file_type = do_file_type(SSL_SET_OPTION(key_type)); + if(SSL_CTX_use_PrivateKey_file(BACKEND->ctx, SSL_SET_OPTION(key), + file_type) != 1) { + failf(data, "unable to set private key"); + return CURLE_SSL_CONNECT_ERROR; + } + } +#endif /* !NO_FILESYSTEM */ + + /* SSL always tries to verify the peer, this only says whether it should + * fail to connect if the verification fails, or if it should continue + * anyway. In the latter case the result of the verification is checked with + * SSL_get_verify_result() below. */ + SSL_CTX_set_verify(BACKEND->ctx, + SSL_CONN_CONFIG(verifypeer)?SSL_VERIFY_PEER: + SSL_VERIFY_NONE, + NULL); + +#ifdef HAVE_SNI + if(sni) { + struct in_addr addr4; +#ifdef ENABLE_IPV6 + struct in6_addr addr6; +#endif + const char * const hostname = SSL_IS_PROXY() ? conn->http_proxy.host.name : + conn->host.name; + size_t hostname_len = strlen(hostname); + if((hostname_len < USHRT_MAX) && + (0 == Curl_inet_pton(AF_INET, hostname, &addr4)) && +#ifdef ENABLE_IPV6 + (0 == Curl_inet_pton(AF_INET6, hostname, &addr6)) && +#endif + (CyaSSL_CTX_UseSNI(BACKEND->ctx, CYASSL_SNI_HOST_NAME, hostname, + (unsigned short)hostname_len) != 1)) { + infof(data, "WARNING: failed to configure server name indication (SNI) " + "TLS extension\n"); + } + } +#endif + +#ifdef HAVE_SUPPORTED_CURVES + /* CyaSSL/wolfSSL does not send the supported ECC curves ext automatically: + https://github.com/wolfSSL/wolfssl/issues/366 + The supported curves below are those also supported by OpenSSL 1.0.2 and + in the same order. */ + CyaSSL_CTX_UseSupportedCurve(BACKEND->ctx, 0x17); /* secp256r1 */ + CyaSSL_CTX_UseSupportedCurve(BACKEND->ctx, 0x19); /* secp521r1 */ + CyaSSL_CTX_UseSupportedCurve(BACKEND->ctx, 0x18); /* secp384r1 */ +#endif + + /* give application a chance to interfere with SSL set up. */ + if(data->set.ssl.fsslctx) { + CURLcode result = CURLE_OK; + result = (*data->set.ssl.fsslctx)(data, BACKEND->ctx, + data->set.ssl.fsslctxp); + if(result) { + failf(data, "error signaled by ssl ctx callback"); + return result; + } + } +#ifdef NO_FILESYSTEM + else if(SSL_CONN_CONFIG(verifypeer)) { + failf(data, "SSL: Certificates couldn't be loaded because CyaSSL was built" + " with \"no filesystem\". Either disable peer verification" + " (insecure) or if you are building an application with libcurl you" + " can load certificates via CURLOPT_SSL_CTX_FUNCTION."); + return CURLE_SSL_CONNECT_ERROR; + } +#endif + + /* Let's make an SSL structure */ + if(BACKEND->handle) + SSL_free(BACKEND->handle); + BACKEND->handle = SSL_new(BACKEND->ctx); + if(!BACKEND->handle) { + failf(data, "SSL: couldn't create a context (handle)!"); + return CURLE_OUT_OF_MEMORY; + } + +#ifdef HAVE_ALPN + if(conn->bits.tls_enable_alpn) { + char protocols[128]; + *protocols = '\0'; + + /* wolfSSL's ALPN protocol name list format is a comma separated string of + protocols in descending order of preference, eg: "h2,http/1.1" */ + +#ifdef USE_NGHTTP2 + if(data->set.httpversion >= CURL_HTTP_VERSION_2) { + strcpy(protocols + strlen(protocols), NGHTTP2_PROTO_VERSION_ID ","); + infof(data, "ALPN, offering %s\n", NGHTTP2_PROTO_VERSION_ID); + } +#endif + + strcpy(protocols + strlen(protocols), ALPN_HTTP_1_1); + infof(data, "ALPN, offering %s\n", ALPN_HTTP_1_1); + + if(wolfSSL_UseALPN(BACKEND->handle, protocols, + (unsigned)strlen(protocols), + WOLFSSL_ALPN_CONTINUE_ON_MISMATCH) != SSL_SUCCESS) { + failf(data, "SSL: failed setting ALPN protocols"); + return CURLE_SSL_CONNECT_ERROR; + } + } +#endif /* HAVE_ALPN */ + + /* Check if there's a cached ID we can/should use here! */ + if(SSL_SET_OPTION(primary.sessionid)) { + void *ssl_sessionid = NULL; + + Curl_ssl_sessionid_lock(conn); + if(!Curl_ssl_getsessionid(conn, &ssl_sessionid, NULL, sockindex)) { + /* we got a session id, use it! */ + if(!SSL_set_session(BACKEND->handle, ssl_sessionid)) { + Curl_ssl_sessionid_unlock(conn); + failf(data, "SSL: SSL_set_session failed: %s", + ERR_error_string(SSL_get_error(BACKEND->handle, 0), + error_buffer)); + return CURLE_SSL_CONNECT_ERROR; + } + /* Informational message */ + infof(data, "SSL re-using session ID\n"); + } + Curl_ssl_sessionid_unlock(conn); + } + + /* pass the raw socket into the SSL layer */ + if(!SSL_set_fd(BACKEND->handle, (int)sockfd)) { + failf(data, "SSL: SSL_set_fd failed"); + return CURLE_SSL_CONNECT_ERROR; + } + + connssl->connecting_state = ssl_connect_2; + return CURLE_OK; +} + + +static CURLcode +cyassl_connect_step2(struct connectdata *conn, + int sockindex) +{ + int ret = -1; + struct Curl_easy *data = conn->data; + struct ssl_connect_data* connssl = &conn->ssl[sockindex]; + const char * const hostname = SSL_IS_PROXY() ? conn->http_proxy.host.name : + conn->host.name; + const char * const dispname = SSL_IS_PROXY() ? + conn->http_proxy.host.dispname : conn->host.dispname; + const char * const pinnedpubkey = SSL_IS_PROXY() ? + data->set.str[STRING_SSL_PINNEDPUBLICKEY_PROXY] : + data->set.str[STRING_SSL_PINNEDPUBLICKEY_ORIG]; + + conn->recv[sockindex] = cyassl_recv; + conn->send[sockindex] = cyassl_send; + + /* Enable RFC2818 checks */ + if(SSL_CONN_CONFIG(verifyhost)) { + ret = CyaSSL_check_domain_name(BACKEND->handle, hostname); + if(ret == SSL_FAILURE) + return CURLE_OUT_OF_MEMORY; + } + + ret = SSL_connect(BACKEND->handle); + if(ret != 1) { + char error_buffer[CYASSL_MAX_ERROR_SZ]; + int detail = SSL_get_error(BACKEND->handle, ret); + + if(SSL_ERROR_WANT_READ == detail) { + connssl->connecting_state = ssl_connect_2_reading; + return CURLE_OK; + } + else if(SSL_ERROR_WANT_WRITE == detail) { + connssl->connecting_state = ssl_connect_2_writing; + return CURLE_OK; + } + /* There is no easy way to override only the CN matching. + * This will enable the override of both mismatching SubjectAltNames + * as also mismatching CN fields */ + else if(DOMAIN_NAME_MISMATCH == detail) { +#if 1 + failf(data, "\tsubject alt name(s) or common name do not match \"%s\"\n", + dispname); + return CURLE_PEER_FAILED_VERIFICATION; +#else + /* When the CyaSSL_check_domain_name() is used and you desire to continue + * on a DOMAIN_NAME_MISMATCH, i.e. 'conn->ssl_config.verifyhost == 0', + * CyaSSL version 2.4.0 will fail with an INCOMPLETE_DATA error. The only + * way to do this is currently to switch the CyaSSL_check_domain_name() + * in and out based on the 'conn->ssl_config.verifyhost' value. */ + if(SSL_CONN_CONFIG(verifyhost)) { + failf(data, + "\tsubject alt name(s) or common name do not match \"%s\"\n", + dispname); + return CURLE_PEER_FAILED_VERIFICATION; + } + else { + infof(data, + "\tsubject alt name(s) and/or common name do not match \"%s\"\n", + dispname); + return CURLE_OK; + } +#endif + } +#if LIBCYASSL_VERSION_HEX >= 0x02007000 /* 2.7.0 */ + else if(ASN_NO_SIGNER_E == detail) { + if(SSL_CONN_CONFIG(verifypeer)) { + failf(data, "\tCA signer not available for verification\n"); + return CURLE_SSL_CACERT_BADFILE; + } + else { + /* Just continue with a warning if no strict certificate + verification is required. */ + infof(data, "CA signer not available for verification, " + "continuing anyway\n"); + } + } +#endif + else { + failf(data, "SSL_connect failed with error %d: %s", detail, + ERR_error_string(detail, error_buffer)); + return CURLE_SSL_CONNECT_ERROR; + } + } + + if(pinnedpubkey) { +#ifdef KEEP_PEER_CERT + X509 *x509; + const char *x509_der; + int x509_der_len; + curl_X509certificate x509_parsed; + curl_asn1Element *pubkey; + CURLcode result; + + x509 = SSL_get_peer_certificate(BACKEND->handle); + if(!x509) { + failf(data, "SSL: failed retrieving server certificate"); + return CURLE_SSL_PINNEDPUBKEYNOTMATCH; + } + + x509_der = (const char *)CyaSSL_X509_get_der(x509, &x509_der_len); + if(!x509_der) { + failf(data, "SSL: failed retrieving ASN.1 server certificate"); + return CURLE_SSL_PINNEDPUBKEYNOTMATCH; + } + + memset(&x509_parsed, 0, sizeof(x509_parsed)); + if(Curl_parseX509(&x509_parsed, x509_der, x509_der + x509_der_len)) + return CURLE_SSL_PINNEDPUBKEYNOTMATCH; + + pubkey = &x509_parsed.subjectPublicKeyInfo; + if(!pubkey->header || pubkey->end <= pubkey->header) { + failf(data, "SSL: failed retrieving public key from server certificate"); + return CURLE_SSL_PINNEDPUBKEYNOTMATCH; + } + + result = Curl_pin_peer_pubkey(data, + pinnedpubkey, + (const unsigned char *)pubkey->header, + (size_t)(pubkey->end - pubkey->header)); + if(result) { + failf(data, "SSL: public key does not match pinned public key!"); + return result; + } +#else + failf(data, "Library lacks pinning support built-in"); + return CURLE_NOT_BUILT_IN; +#endif + } + +#ifdef HAVE_ALPN + if(conn->bits.tls_enable_alpn) { + int rc; + char *protocol = NULL; + unsigned short protocol_len = 0; + + rc = wolfSSL_ALPN_GetProtocol(BACKEND->handle, &protocol, &protocol_len); + + if(rc == SSL_SUCCESS) { + infof(data, "ALPN, server accepted to use %.*s\n", protocol_len, + protocol); + + if(protocol_len == ALPN_HTTP_1_1_LENGTH && + !memcmp(protocol, ALPN_HTTP_1_1, ALPN_HTTP_1_1_LENGTH)) + conn->negnpn = CURL_HTTP_VERSION_1_1; +#ifdef USE_NGHTTP2 + else if(data->set.httpversion >= CURL_HTTP_VERSION_2 && + protocol_len == NGHTTP2_PROTO_VERSION_ID_LEN && + !memcmp(protocol, NGHTTP2_PROTO_VERSION_ID, + NGHTTP2_PROTO_VERSION_ID_LEN)) + conn->negnpn = CURL_HTTP_VERSION_2; +#endif + else + infof(data, "ALPN, unrecognized protocol %.*s\n", protocol_len, + protocol); + } + else if(rc == SSL_ALPN_NOT_FOUND) + infof(data, "ALPN, server did not agree to a protocol\n"); + else { + failf(data, "ALPN, failure getting protocol, error %d", rc); + return CURLE_SSL_CONNECT_ERROR; + } + } +#endif /* HAVE_ALPN */ + + connssl->connecting_state = ssl_connect_3; +#if (LIBCYASSL_VERSION_HEX >= 0x03009010) + infof(data, "SSL connection using %s / %s\n", + wolfSSL_get_version(BACKEND->handle), + wolfSSL_get_cipher_name(BACKEND->handle)); +#else + infof(data, "SSL connected\n"); +#endif + + return CURLE_OK; +} + + +static CURLcode +cyassl_connect_step3(struct connectdata *conn, + int sockindex) +{ + CURLcode result = CURLE_OK; + struct Curl_easy *data = conn->data; + struct ssl_connect_data *connssl = &conn->ssl[sockindex]; + + DEBUGASSERT(ssl_connect_3 == connssl->connecting_state); + + if(SSL_SET_OPTION(primary.sessionid)) { + bool incache; + SSL_SESSION *our_ssl_sessionid; + void *old_ssl_sessionid = NULL; + + our_ssl_sessionid = SSL_get_session(BACKEND->handle); + + Curl_ssl_sessionid_lock(conn); + incache = !(Curl_ssl_getsessionid(conn, &old_ssl_sessionid, NULL, + sockindex)); + if(incache) { + if(old_ssl_sessionid != our_ssl_sessionid) { + infof(data, "old SSL session ID is stale, removing\n"); + Curl_ssl_delsessionid(conn, old_ssl_sessionid); + incache = FALSE; + } + } + + if(!incache) { + result = Curl_ssl_addsessionid(conn, our_ssl_sessionid, + 0 /* unknown size */, sockindex); + if(result) { + Curl_ssl_sessionid_unlock(conn); + failf(data, "failed to store ssl session"); + return result; + } + } + Curl_ssl_sessionid_unlock(conn); + } + + connssl->connecting_state = ssl_connect_done; + + return result; +} + + +static ssize_t cyassl_send(struct connectdata *conn, + int sockindex, + const void *mem, + size_t len, + CURLcode *curlcode) +{ + struct ssl_connect_data *connssl = &conn->ssl[sockindex]; + char error_buffer[CYASSL_MAX_ERROR_SZ]; + int memlen = (len > (size_t)INT_MAX) ? INT_MAX : (int)len; + int rc = SSL_write(BACKEND->handle, mem, memlen); + + if(rc < 0) { + int err = SSL_get_error(BACKEND->handle, rc); + + switch(err) { + case SSL_ERROR_WANT_READ: + case SSL_ERROR_WANT_WRITE: + /* there's data pending, re-invoke SSL_write() */ + *curlcode = CURLE_AGAIN; + return -1; + default: + failf(conn->data, "SSL write: %s, errno %d", + ERR_error_string(err, error_buffer), + SOCKERRNO); + *curlcode = CURLE_SEND_ERROR; + return -1; + } + } + return rc; +} + +static void Curl_cyassl_close(struct connectdata *conn, int sockindex) +{ + struct ssl_connect_data *connssl = &conn->ssl[sockindex]; + + if(BACKEND->handle) { + (void)SSL_shutdown(BACKEND->handle); + SSL_free(BACKEND->handle); + BACKEND->handle = NULL; + } + if(BACKEND->ctx) { + SSL_CTX_free(BACKEND->ctx); + BACKEND->ctx = NULL; + } +} + +static ssize_t cyassl_recv(struct connectdata *conn, + int num, + char *buf, + size_t buffersize, + CURLcode *curlcode) +{ + struct ssl_connect_data *connssl = &conn->ssl[num]; + char error_buffer[CYASSL_MAX_ERROR_SZ]; + int buffsize = (buffersize > (size_t)INT_MAX) ? INT_MAX : (int)buffersize; + int nread = SSL_read(BACKEND->handle, buf, buffsize); + + if(nread < 0) { + int err = SSL_get_error(BACKEND->handle, nread); + + switch(err) { + case SSL_ERROR_ZERO_RETURN: /* no more data */ + break; + case SSL_ERROR_WANT_READ: + case SSL_ERROR_WANT_WRITE: + /* there's data pending, re-invoke SSL_read() */ + *curlcode = CURLE_AGAIN; + return -1; + default: + failf(conn->data, "SSL read: %s, errno %d", + ERR_error_string(err, error_buffer), + SOCKERRNO); + *curlcode = CURLE_RECV_ERROR; + return -1; + } + } + return nread; +} + + +static void Curl_cyassl_session_free(void *ptr) +{ + (void)ptr; + /* CyaSSL reuses sessions on own, no free */ +} + + +static size_t Curl_cyassl_version(char *buffer, size_t size) +{ +#if LIBCYASSL_VERSION_HEX >= 0x03006000 + return snprintf(buffer, size, "wolfSSL/%s", wolfSSL_lib_version()); +#elif defined(WOLFSSL_VERSION) + return snprintf(buffer, size, "wolfSSL/%s", WOLFSSL_VERSION); +#elif defined(CYASSL_VERSION) + return snprintf(buffer, size, "CyaSSL/%s", CYASSL_VERSION); +#else + return snprintf(buffer, size, "CyaSSL/%s", "<1.8.8"); +#endif +} + + +static int Curl_cyassl_init(void) +{ + return (CyaSSL_Init() == SSL_SUCCESS); +} + + +static bool Curl_cyassl_data_pending(const struct connectdata* conn, + int connindex) +{ + const struct ssl_connect_data *connssl = &conn->ssl[connindex]; + if(BACKEND->handle) /* SSL is in use */ + return (0 != SSL_pending(BACKEND->handle)) ? TRUE : FALSE; + else + return FALSE; +} + + +/* + * This function is called to shut down the SSL layer but keep the + * socket open (CCC - Clear Command Channel) + */ +static int Curl_cyassl_shutdown(struct connectdata *conn, int sockindex) +{ + int retval = 0; + struct ssl_connect_data *connssl = &conn->ssl[sockindex]; + + if(BACKEND->handle) { + SSL_free(BACKEND->handle); + BACKEND->handle = NULL; + } + return retval; +} + + +static CURLcode +cyassl_connect_common(struct connectdata *conn, + int sockindex, + bool nonblocking, + bool *done) +{ + CURLcode result; + struct Curl_easy *data = conn->data; + struct ssl_connect_data *connssl = &conn->ssl[sockindex]; + curl_socket_t sockfd = conn->sock[sockindex]; + time_t timeout_ms; + int what; + + /* check if the connection has already been established */ + if(ssl_connection_complete == connssl->state) { + *done = TRUE; + return CURLE_OK; + } + + if(ssl_connect_1 == connssl->connecting_state) { + /* Find out how much more time we're allowed */ + timeout_ms = Curl_timeleft(data, NULL, TRUE); + + if(timeout_ms < 0) { + /* no need to continue if time already is up */ + failf(data, "SSL connection timeout"); + return CURLE_OPERATION_TIMEDOUT; + } + + result = cyassl_connect_step1(conn, sockindex); + if(result) + return result; + } + + while(ssl_connect_2 == connssl->connecting_state || + ssl_connect_2_reading == connssl->connecting_state || + ssl_connect_2_writing == connssl->connecting_state) { + + /* check allowed time left */ + timeout_ms = Curl_timeleft(data, NULL, TRUE); + + if(timeout_ms < 0) { + /* no need to continue if time already is up */ + failf(data, "SSL connection timeout"); + return CURLE_OPERATION_TIMEDOUT; + } + + /* if ssl is expecting something, check if it's available. */ + if(connssl->connecting_state == ssl_connect_2_reading + || connssl->connecting_state == ssl_connect_2_writing) { + + curl_socket_t writefd = ssl_connect_2_writing == + connssl->connecting_state?sockfd:CURL_SOCKET_BAD; + curl_socket_t readfd = ssl_connect_2_reading == + connssl->connecting_state?sockfd:CURL_SOCKET_BAD; + + what = Curl_socket_check(readfd, CURL_SOCKET_BAD, writefd, + nonblocking?0:timeout_ms); + if(what < 0) { + /* fatal error */ + failf(data, "select/poll on SSL socket, errno: %d", SOCKERRNO); + return CURLE_SSL_CONNECT_ERROR; + } + else if(0 == what) { + if(nonblocking) { + *done = FALSE; + return CURLE_OK; + } + else { + /* timeout */ + failf(data, "SSL connection timeout"); + return CURLE_OPERATION_TIMEDOUT; + } + } + /* socket is readable or writable */ + } + + /* Run transaction, and return to the caller if it failed or if + * this connection is part of a multi handle and this loop would + * execute again. This permits the owner of a multi handle to + * abort a connection attempt before step2 has completed while + * ensuring that a client using select() or epoll() will always + * have a valid fdset to wait on. + */ + result = cyassl_connect_step2(conn, sockindex); + if(result || (nonblocking && + (ssl_connect_2 == connssl->connecting_state || + ssl_connect_2_reading == connssl->connecting_state || + ssl_connect_2_writing == connssl->connecting_state))) + return result; + } /* repeat step2 until all transactions are done. */ + + if(ssl_connect_3 == connssl->connecting_state) { + result = cyassl_connect_step3(conn, sockindex); + if(result) + return result; + } + + if(ssl_connect_done == connssl->connecting_state) { + connssl->state = ssl_connection_complete; + conn->recv[sockindex] = cyassl_recv; + conn->send[sockindex] = cyassl_send; + *done = TRUE; + } + else + *done = FALSE; + + /* Reset our connect state machine */ + connssl->connecting_state = ssl_connect_1; + + return CURLE_OK; +} + + +static CURLcode Curl_cyassl_connect_nonblocking(struct connectdata *conn, + int sockindex, bool *done) +{ + return cyassl_connect_common(conn, sockindex, TRUE, done); +} + + +static CURLcode Curl_cyassl_connect(struct connectdata *conn, int sockindex) +{ + CURLcode result; + bool done = FALSE; + + result = cyassl_connect_common(conn, sockindex, FALSE, &done); + if(result) + return result; + + DEBUGASSERT(done); + + return CURLE_OK; +} + +static CURLcode Curl_cyassl_random(struct Curl_easy *data, + unsigned char *entropy, size_t length) +{ + RNG rng; + (void)data; + if(InitRng(&rng)) + return CURLE_FAILED_INIT; + if(length > UINT_MAX) + return CURLE_FAILED_INIT; + if(RNG_GenerateBlock(&rng, entropy, (unsigned)length)) + return CURLE_FAILED_INIT; + if(FreeRng(&rng)) + return CURLE_FAILED_INIT; + return CURLE_OK; +} + +static CURLcode Curl_cyassl_sha256sum(const unsigned char *tmp, /* input */ + size_t tmplen, + unsigned char *sha256sum /* output */, + size_t unused) +{ + Sha256 SHA256pw; + (void)unused; + InitSha256(&SHA256pw); + Sha256Update(&SHA256pw, tmp, (word32)tmplen); + Sha256Final(&SHA256pw, sha256sum); + return CURLE_OK; +} + +static void *Curl_cyassl_get_internals(struct ssl_connect_data *connssl, + CURLINFO info UNUSED_PARAM) +{ + (void)info; + return BACKEND->handle; +} + +const struct Curl_ssl Curl_ssl_cyassl = { + { CURLSSLBACKEND_WOLFSSL, "WolfSSL" }, /* info */ + +#ifdef KEEP_PEER_CERT + SSLSUPP_PINNEDPUBKEY | +#endif + SSLSUPP_SSL_CTX, + + sizeof(struct ssl_backend_data), + + Curl_cyassl_init, /* init */ + Curl_none_cleanup, /* cleanup */ + Curl_cyassl_version, /* version */ + Curl_none_check_cxn, /* check_cxn */ + Curl_cyassl_shutdown, /* shutdown */ + Curl_cyassl_data_pending, /* data_pending */ + Curl_cyassl_random, /* random */ + Curl_none_cert_status_request, /* cert_status_request */ + Curl_cyassl_connect, /* connect */ + Curl_cyassl_connect_nonblocking, /* connect_nonblocking */ + Curl_cyassl_get_internals, /* get_internals */ + Curl_cyassl_close, /* close_one */ + Curl_none_close_all, /* close_all */ + Curl_cyassl_session_free, /* session_free */ + Curl_none_set_engine, /* set_engine */ + Curl_none_set_engine_default, /* set_engine_default */ + Curl_none_engines_list, /* engines_list */ + Curl_none_false_start, /* false_start */ + Curl_none_md5sum, /* md5sum */ + Curl_cyassl_sha256sum /* sha256sum */ +}; + +#endif |