1 files changed, 328 insertions, 0 deletions
diff --git a/Utilities/cmliblzma/liblzma/lz/lz_encoder.h b/Utilities/cmliblzma/liblzma/lz/lz_encoder.h
new file mode 100644
index 0000000..741c453
--- /dev/null
+++ b/Utilities/cmliblzma/liblzma/lz/lz_encoder.h
@@ -0,0 +1,328 @@
+///////////////////////////////////////////////////////////////////////////////
+//
+/// \file       lz_encoder.h
+/// \brief      LZ in window and match finder API
+///
+//  Authors:    Igor Pavlov
+//              Lasse Collin
+//
+//  This file has been put into the public domain.
+//  You can do whatever you want with this file.
+//
+///////////////////////////////////////////////////////////////////////////////
+
+#ifndef LZMA_LZ_ENCODER_H
+#define LZMA_LZ_ENCODER_H
+
+#include "common.h"
+
+
+/// A table of these is used by the LZ-based encoder to hold
+/// the length-distance pairs found by the match finder.
+typedef struct {
+	uint32_t len;
+	uint32_t dist;
+} lzma_match;
+
+
+typedef struct lzma_mf_s lzma_mf;
+struct lzma_mf_s {
+	///////////////
+	// In Window //
+	///////////////
+
+	/// Pointer to buffer with data to be compressed
+	uint8_t *buffer;
+
+	/// Total size of the allocated buffer (that is, including all
+	/// the extra space)
+	uint32_t size;
+
+	/// Number of bytes that must be kept available in our input history.
+	/// That is, once keep_size_before bytes have been processed,
+	/// buffer[read_pos - keep_size_before] is the oldest byte that
+	/// must be available for reading.
+	uint32_t keep_size_before;
+
+	/// Number of bytes that must be kept in buffer after read_pos.
+	/// That is, read_pos <= write_pos - keep_size_after as long as
+	/// action is LZMA_RUN; when action != LZMA_RUN, read_pos is allowed
+	/// to reach write_pos so that the last bytes get encoded too.
+	uint32_t keep_size_after;
+
+	/// Match finders store locations of matches using 32-bit integers.
+	/// To avoid adjusting several megabytes of integers every time the
+	/// input window is moved with move_window, we only adjust the
+	/// offset of the buffer. Thus, buffer[value_in_hash_table - offset]
+	/// is the byte pointed by value_in_hash_table.
+	uint32_t offset;
+
+	/// buffer[read_pos] is the next byte to run through the match
+	/// finder. This is incremented in the match finder once the byte
+	/// has been processed.
+	uint32_t read_pos;
+
+	/// Number of bytes that have been ran through the match finder, but
+	/// which haven't been encoded by the LZ-based encoder yet.
+	uint32_t read_ahead;
+
+	/// As long as read_pos is less than read_limit, there is enough
+	/// input available in buffer for at least one encoding loop.
+	///
+	/// Because of the stateful API, read_limit may and will get greater
+	/// than read_pos quite often. This is taken into account when
+	/// calculating the value for keep_size_after.
+	uint32_t read_limit;
+
+	/// buffer[write_pos] is the first byte that doesn't contain valid
+	/// uncompressed data; that is, the next input byte will be copied
+	/// to buffer[write_pos].
+	uint32_t write_pos;
+
+	/// Number of bytes not hashed before read_pos. This is needed to
+	/// restart the match finder after LZMA_SYNC_FLUSH.
+	uint32_t pending;
+
+	//////////////////
+	// Match Finder //
+	//////////////////
+
+	/// Find matches. Returns the number of distance-length pairs written
+	/// to the matches array. This is called only via lzma_mf_find().
+	uint32_t (*find)(lzma_mf *mf, lzma_match *matches);
+
+	/// Skips num bytes. This is like find() but doesn't make the
+	/// distance-length pairs available, thus being a little faster.
+	/// This is called only via mf_skip().
+	void (*skip)(lzma_mf *mf, uint32_t num);
+
+	uint32_t *hash;
+	uint32_t *son;
+	uint32_t cyclic_pos;
+	uint32_t cyclic_size; // Must be dictionary size + 1.
+	uint32_t hash_mask;
+
+	/// Maximum number of loops in the match finder
+	uint32_t depth;
+
+	/// Maximum length of a match that the match finder will try to find.
+	uint32_t nice_len;
+
+	/// Maximum length of a match supported by the LZ-based encoder.
+	/// If the longest match found by the match finder is nice_len,
+	/// mf_find() tries to expand it up to match_len_max bytes.
+	uint32_t match_len_max;
+
+	/// When running out of input, binary tree match finders need to know
+	/// if it is due to flushing or finishing. The action is used also
+	/// by the LZ-based encoders themselves.
+	lzma_action action;
+
+	/// Number of elements in hash[]
+	uint32_t hash_size_sum;
+
+	/// Number of elements in son[]
+	uint32_t sons_count;
+};
+
+
+typedef struct {
+	/// Extra amount of data to keep available before the "actual"
+	/// dictionary.
+	size_t before_size;
+
+	/// Size of the history buffer
+	size_t dict_size;
+
+	/// Extra amount of data to keep available after the "actual"
+	/// dictionary.
+	size_t after_size;
+
+	/// Maximum length of a match that the LZ-based encoder can accept.
+	/// This is used to extend matches of length nice_len to the
+	/// maximum possible length.
+	size_t match_len_max;
+
+	/// Match finder will search matches up to this length.
+	/// This must be less than or equal to match_len_max.
+	size_t nice_len;
+
+	/// Type of the match finder to use
+	lzma_match_finder match_finder;
+
+	/// Maximum search depth
+	uint32_t depth;
+
+	/// TODO: Comment
+	const uint8_t *preset_dict;
+
+	uint32_t preset_dict_size;
+
+} lzma_lz_options;
+
+
+// The total usable buffer space at any moment outside the match finder:
+// before_size + dict_size + after_size + match_len_max
+//
+// In reality, there's some extra space allocated to prevent the number of
+// memmove() calls reasonable. The bigger the dict_size is, the bigger
+// this extra buffer will be since with bigger dictionaries memmove() would
+// also take longer.
+//
+// A single encoder loop in the LZ-based encoder may call the match finder
+// (mf_find() or mf_skip()) at most after_size times. In other words,
+// a single encoder loop may increment lzma_mf.read_pos at most after_size
+// times. Since matches are looked up to
+// lzma_mf.buffer[lzma_mf.read_pos + match_len_max - 1], the total
+// amount of extra buffer needed after dict_size becomes
+// after_size + match_len_max.
+//
+// before_size has two uses. The first one is to keep literals available
+// in cases when the LZ-based encoder has made some read ahead.
+// TODO: Maybe this could be changed by making the LZ-based encoders to
+// store the actual literals as they do with length-distance pairs.
+//
+// Algorithms such as LZMA2 first try to compress a chunk, and then check
+// if the encoded result is smaller than the uncompressed one. If the chunk
+// was uncompressible, it is better to store it in uncompressed form in
+// the output stream. To do this, the whole uncompressed chunk has to be
+// still available in the history buffer. before_size achieves that.
+
+
+typedef struct {
+	/// Data specific to the LZ-based encoder
+	lzma_coder *coder;
+
+	/// Function to encode from *dict to out[]
+	lzma_ret (*code)(lzma_coder *restrict coder,
+			lzma_mf *restrict mf, uint8_t *restrict out,
+			size_t *restrict out_pos, size_t out_size);
+
+	/// Free allocated resources
+	void (*end)(lzma_coder *coder, lzma_allocator *allocator);
+
+	/// Update the options in the middle of the encoding.
+	lzma_ret (*options_update)(lzma_coder *coder,
+			const lzma_filter *filter);
+
+} lzma_lz_encoder;
+
+
+// Basic steps:
+//  1. Input gets copied into the dictionary.
+//  2. Data in dictionary gets run through the match finder byte by byte.
+//  3. The literals and matches are encoded using e.g. LZMA.
+//
+// The bytes that have been ran through the match finder, but not encoded yet,
+// are called `read ahead'.
+
+
+/// Get pointer to the first byte not ran through the match finder
+static inline const uint8_t *
+mf_ptr(const lzma_mf *mf)
+{
+	return mf->buffer + mf->read_pos;
+}
+
+
+/// Get the number of bytes that haven't been ran through the match finder yet.
+static inline uint32_t
+mf_avail(const lzma_mf *mf)
+{
+	return mf->write_pos - mf->read_pos;
+}
+
+
+/// Get the number of bytes that haven't been encoded yet (some of these
+/// bytes may have been ran through the match finder though).
+static inline uint32_t
+mf_unencoded(const lzma_mf *mf)
+{
+	return mf->write_pos - mf->read_pos + mf->read_ahead;
+}
+
+
+/// Calculate the absolute offset from the beginning of the most recent
+/// dictionary reset. Only the lowest four bits are important, so there's no
+/// problem that we don't know the 64-bit size of the data encoded so far.
+///
+/// NOTE: When moving the input window, we need to do it so that the lowest
+/// bits of dict->read_pos are not modified to keep this macro working
+/// as intended.
+static inline uint32_t
+mf_position(const lzma_mf *mf)
+{
+	return mf->read_pos - mf->read_ahead;
+}
+
+
+/// Since everything else begins with mf_, use it also for lzma_mf_find().
+#define mf_find lzma_mf_find
+
+
+/// Skip the given number of bytes. This is used when a good match was found.
+/// For example, if mf_find() finds a match of 200 bytes long, the first byte
+/// of that match was already consumed by mf_find(), and the rest 199 bytes
+/// have to be skipped with mf_skip(mf, 199).
+static inline void
+mf_skip(lzma_mf *mf, uint32_t amount)
+{
+	if (amount != 0) {
+		mf->skip(mf, amount);
+		mf->read_ahead += amount;
+	}
+}
+
+
+/// Copies at most *left number of bytes from the history buffer
+/// to out[]. This is needed by LZMA2 to encode uncompressed chunks.
+static inline void
+mf_read(lzma_mf *mf, uint8_t *out, size_t *out_pos, size_t out_size,
+		size_t *left)
+{
+	const size_t out_avail = out_size - *out_pos;
+	const size_t copy_size = my_min(out_avail, *left);
+
+	assert(mf->read_ahead == 0);
+	assert(mf->read_pos >= *left);
+
+	memcpy(out + *out_pos, mf->buffer + mf->read_pos - *left,
+			copy_size);
+
+	*out_pos += copy_size;
+	*left -= copy_size;
+	return;
+}
+
+
+extern lzma_ret lzma_lz_encoder_init(
+		lzma_next_coder *next, lzma_allocator *allocator,
+		const lzma_filter_info *filters,
+		lzma_ret (*lz_init)(lzma_lz_encoder *lz,
+			lzma_allocator *allocator, const void *options,
+			lzma_lz_options *lz_options));
+
+
+extern uint64_t lzma_lz_encoder_memusage(const lzma_lz_options *lz_options);
+
+
+// These are only for LZ encoder's internal use.
+extern uint32_t lzma_mf_find(
+		lzma_mf *mf, uint32_t *count, lzma_match *matches);
+
+extern uint32_t lzma_mf_hc3_find(lzma_mf *dict, lzma_match *matches);
+extern void lzma_mf_hc3_skip(lzma_mf *dict, uint32_t amount);
+
+extern uint32_t lzma_mf_hc4_find(lzma_mf *dict, lzma_match *matches);
+extern void lzma_mf_hc4_skip(lzma_mf *dict, uint32_t amount);
+
+extern uint32_t lzma_mf_bt2_find(lzma_mf *dict, lzma_match *matches);
+extern void lzma_mf_bt2_skip(lzma_mf *dict, uint32_t amount);
+
+extern uint32_t lzma_mf_bt3_find(lzma_mf *dict, lzma_match *matches);
+extern void lzma_mf_bt3_skip(lzma_mf *dict, uint32_t amount);
+
+extern uint32_t lzma_mf_bt4_find(lzma_mf *dict, lzma_match *matches);
+extern void lzma_mf_bt4_skip(lzma_mf *dict, uint32_t amount);
+
+#endif