diff options
Diffstat (limited to 'Utilities/cmzlib')
34 files changed, 9163 insertions, 0 deletions
diff --git a/Utilities/cmzlib/.NoDartCoverage b/Utilities/cmzlib/.NoDartCoverage new file mode 100644 index 0000000..3c99729 --- /dev/null +++ b/Utilities/cmzlib/.NoDartCoverage @@ -0,0 +1 @@ +# do not do coverage in this directory diff --git a/Utilities/cmzlib/CMakeLists.txt b/Utilities/cmzlib/CMakeLists.txt new file mode 100644 index 0000000..1c8c6e5 --- /dev/null +++ b/Utilities/cmzlib/CMakeLists.txt @@ -0,0 +1,40 @@ +PROJECT(CMZLIB) +INCLUDE_REGULAR_EXPRESSION("^(deflate|inf|trees|zconf|zlib|zutil).*$") + +INCLUDE_DIRECTORIES(${CMZLIB_SOURCE_DIR}) + +# source files for zlib +SET(ZLIB_SRCS + adler32.c gzio.c inftrees.c uncompr.c + compress.c infblock.c infutil.c zutil.c + crc32.c infcodes.c + deflate.c inffast.c + inflate.c trees.c + ) + +# for windows add the .def and .rc files to the source list +IF(WIN32) + IF(BUILD_SHARED_LIBS) + SET(ZLIB_DLL 1) + ENDIF(BUILD_SHARED_LIBS) + IF(NOT UNIX) + IF(NOT BORLAND) + IF(NOT MINGW) + SET(ZLIB_SRCS ${ZLIB_SRCS} zlib.def zlib.rc ) + ENDIF(NOT MINGW) + ENDIF(NOT BORLAND) + ENDIF(NOT UNIX) +ENDIF(WIN32) + +CONFIGURE_FILE(${CMZLIB_SOURCE_DIR}/.NoDartCoverage + ${CMZLIB_BINARY_DIR}/.NoDartCoverage) +CONFIGURE_FILE(${CMZLIB_SOURCE_DIR}/zlibDllConfig.h.in + ${CMZLIB_BINARY_DIR}/zlibDllConfig.h) + +FOREACH(name zlib zconf cm_zlib_mangle) + CONFIGURE_FILE(${CMZLIB_SOURCE_DIR}/${name}.h + ${CMZLIB_BINARY_DIR}/${name}.h COPYONLY) +ENDFOREACH(name) + + +ADD_LIBRARY(cmzlib ${ZLIB_SRCS}) diff --git a/Utilities/cmzlib/adler32.c b/Utilities/cmzlib/adler32.c new file mode 100644 index 0000000..6e9a7dd --- /dev/null +++ b/Utilities/cmzlib/adler32.c @@ -0,0 +1,48 @@ +/* adler32.c -- compute the Adler-32 checksum of a data stream + * Copyright (C) 1995-2002 Mark Adler + * For conditions of distribution and use, see copyright notice in zlib.h + */ + +/* @(#) $Id$ */ + +#include "zlib.h" + +#define BASE 65521L /* largest prime smaller than 65536 */ +#define NMAX 5552 +/* NMAX is the largest n such that 255n(n+1)/2 + (n+1)(BASE-1) <= 2^32-1 */ + +#define DO1(buf,i) {s1 += buf[i]; s2 += s1;} +#define DO2(buf,i) DO1(buf,i); DO1(buf,i+1); +#define DO4(buf,i) DO2(buf,i); DO2(buf,i+2); +#define DO8(buf,i) DO4(buf,i); DO4(buf,i+4); +#define DO16(buf) DO8(buf,0); DO8(buf,8); + +/* ========================================================================= */ +uLong ZEXPORT adler32(adler, buf, len) + uLong adler; + const Bytef *buf; + uInt len; +{ + unsigned long s1 = adler & 0xffff; + unsigned long s2 = (adler >> 16) & 0xffff; + int k; + + if (buf == Z_NULL) return 1L; + + while (len > 0) { + k = len < NMAX ? len : NMAX; + len -= k; + while (k >= 16) { + DO16(buf); + buf += 16; + k -= 16; + } + if (k != 0) do { + s1 += *buf++; + s2 += s1; + } while (--k); + s1 %= BASE; + s2 %= BASE; + } + return (s2 << 16) | s1; +} diff --git a/Utilities/cmzlib/cm_zlib_mangle.h b/Utilities/cmzlib/cm_zlib_mangle.h new file mode 100644 index 0000000..750816d --- /dev/null +++ b/Utilities/cmzlib/cm_zlib_mangle.h @@ -0,0 +1,86 @@ +#ifndef cm_zlib_mangle_h +#define cm_zlib_mangle_h + +/* + +This header file mangles all symbols exported from the zlib library. +It is included in all files while building the zlib library. Due to +namespace pollution, no zlib headers should be included in .h files in +cm. + +The following command was used to obtain the symbol list: + +nm libcmzlib.a |grep " [TR] " + +*/ + +#define deflate_copyright cm_zlib_deflate_copyright +#define _length_code cm_zlib__length_code +#define _dist_code cm_zlib__dist_code +#define _tr_align cm_zlib__tr_align +#define _tr_flush_block cm_zlib__tr_flush_block +#define _tr_init cm_zlib__tr_init +#define _tr_stored_block cm_zlib__tr_stored_block +#define _tr_tally cm_zlib__tr_tally +#define adler32 cm_zlib_adler32 +#define compress cm_zlib_compress +#define compress2 cm_zlib_compress2 +#define crc32 cm_zlib_crc32 +#define deflate cm_zlib_deflate +#define deflateCopy cm_zlib_deflateCopy +#define deflateEnd cm_zlib_deflateEnd +#define deflateInit2_ cm_zlib_deflateInit2_ +#define deflateInit_ cm_zlib_deflateInit_ +#define deflateParams cm_zlib_deflateParams +#define deflateReset cm_zlib_deflateReset +#define deflateSetDictionary cm_zlib_deflateSetDictionary +#define get_crc_table cm_zlib_get_crc_table +#define gzclose cm_zlib_gzclose +#define gzdopen cm_zlib_gzdopen +#define gzeof cm_zlib_gzeof +#define gzerror cm_zlib_gzerror +#define gzflush cm_zlib_gzflush +#define gzgetc cm_zlib_gzgetc +#define gzgets cm_zlib_gzgets +#define gzopen cm_zlib_gzopen +#define gzprintf cm_zlib_gzprintf +#define gzputc cm_zlib_gzputc +#define gzputs cm_zlib_gzputs +#define gzread cm_zlib_gzread +#define gzrewind cm_zlib_gzrewind +#define gzseek cm_zlib_gzseek +#define gzsetparams cm_zlib_gzsetparams +#define gztell cm_zlib_gztell +#define gzwrite cm_zlib_gzwrite +#define inflate cm_zlib_inflate +#define inflateEnd cm_zlib_inflateEnd +#define inflateInit2_ cm_zlib_inflateInit2_ +#define inflateInit_ cm_zlib_inflateInit_ +#define inflateReset cm_zlib_inflateReset +#define inflateSetDictionary cm_zlib_inflateSetDictionary +#define inflateSync cm_zlib_inflateSync +#define inflateSyncPoint cm_zlib_inflateSyncPoint +#define inflate_blocks cm_zlib_inflate_blocks +#define inflate_blocks_free cm_zlib_inflate_blocks_free +#define inflate_blocks_new cm_zlib_inflate_blocks_new +#define inflate_blocks_reset cm_zlib_inflate_blocks_reset +#define inflate_blocks_sync_point cm_zlib_inflate_blocks_sync_point +#define inflate_codes cm_zlib_inflate_codes +#define inflate_codes_free cm_zlib_inflate_codes_free +#define inflate_codes_new cm_zlib_inflate_codes_new +#define inflate_copyright cm_zlib_inflate_copyright +#define inflate_fast cm_zlib_inflate_fast +#define inflate_flush cm_zlib_inflate_flush +#define inflate_mask cm_zlib_inflate_mask +#define inflate_set_dictionary cm_zlib_inflate_set_dictionary +#define inflate_trees_bits cm_zlib_inflate_trees_bits +#define inflate_trees_dynamic cm_zlib_inflate_trees_dynamic +#define inflate_trees_fixed cm_zlib_inflate_trees_fixed +#define uncompress cm_zlib_uncompress +#define zError cm_zlib_zError +#define zcalloc cm_zlib_zcalloc +#define zcfree cm_zlib_zcfree +#define zlibVersion cm_zlib_zlibVersion +#define z_errmsg cm_zlib_z_errmsg + +#endif diff --git a/Utilities/cmzlib/compress.c b/Utilities/cmzlib/compress.c new file mode 100644 index 0000000..e45e249 --- /dev/null +++ b/Utilities/cmzlib/compress.c @@ -0,0 +1,71 @@ +/* compress.c -- compress a memory buffer + * Copyright (C) 1995-2002 Jean-loup Gailly. + * For conditions of distribution and use, see copyright notice in zlib.h + */ + +/* @(#) $Id$ */ + +#if defined(_MSC_VER) +#pragma warning ( disable : 4702 ) +#endif +#include "zlib.h" + +/* =========================================================================== + Compresses the source buffer into the destination buffer. The level + parameter has the same meaning as in deflateInit. sourceLen is the byte + length of the source buffer. Upon entry, destLen is the total size of the + destination buffer, which must be at least 0.1% larger than sourceLen plus + 12 bytes. Upon exit, destLen is the actual size of the compressed buffer. + + compress2 returns Z_OK if success, Z_MEM_ERROR if there was not enough + memory, Z_BUF_ERROR if there was not enough room in the output buffer, + Z_STREAM_ERROR if the level parameter is invalid. +*/ +int ZEXPORT compress2 (dest, destLen, source, sourceLen, level) + Bytef *dest; + uLongf *destLen; + const Bytef *source; + uLong sourceLen; + int level; +{ + z_stream stream; + int err; + + stream.next_in = (Bytef*)source; + stream.avail_in = (uInt)sourceLen; +#ifdef MAXSEG_64K + /* Check for source > 64K on 16-bit machine: */ + if ((uLong)stream.avail_in != sourceLen) return Z_BUF_ERROR; +#endif + stream.next_out = dest; + stream.avail_out = (uInt)*destLen; + if ((uLong)stream.avail_out != *destLen) return Z_BUF_ERROR; + + stream.zalloc = (alloc_func)0; + stream.zfree = (free_func)0; + stream.opaque = (voidpf)0; + + err = deflateInit(&stream, level); + if (err != Z_OK) return err; + + err = deflate(&stream, Z_FINISH); + if (err != Z_STREAM_END) { + deflateEnd(&stream); + return err == Z_OK ? Z_BUF_ERROR : err; + } + *destLen = stream.total_out; + + err = deflateEnd(&stream); + return err; +} + +/* =========================================================================== + */ +int ZEXPORT compress (dest, destLen, source, sourceLen) + Bytef *dest; + uLongf *destLen; + const Bytef *source; + uLong sourceLen; +{ + return compress2(dest, destLen, source, sourceLen, Z_DEFAULT_COMPRESSION); +} diff --git a/Utilities/cmzlib/crc32.c b/Utilities/cmzlib/crc32.c new file mode 100644 index 0000000..60deca2 --- /dev/null +++ b/Utilities/cmzlib/crc32.c @@ -0,0 +1,162 @@ +/* crc32.c -- compute the CRC-32 of a data stream + * Copyright (C) 1995-2002 Mark Adler + * For conditions of distribution and use, see copyright notice in zlib.h + */ + +/* @(#) $Id$ */ + +#include "zlib.h" + +#define local static + +#ifdef DYNAMIC_CRC_TABLE + +local int crc_table_empty = 1; +local uLongf crc_table[256]; +local void make_crc_table OF((void)); + +/* + Generate a table for a byte-wise 32-bit CRC calculation on the polynomial: + x^32+x^26+x^23+x^22+x^16+x^12+x^11+x^10+x^8+x^7+x^5+x^4+x^2+x+1. + + Polynomials over GF(2) are represented in binary, one bit per coefficient, + with the lowest powers in the most significant bit. Then adding polynomials + is just exclusive-or, and multiplying a polynomial by x is a right shift by + one. If we call the above polynomial p, and represent a byte as the + polynomial q, also with the lowest power in the most significant bit (so the + byte 0xb1 is the polynomial x^7+x^3+x+1), then the CRC is (q*x^32) mod p, + where a mod b means the remainder after dividing a by b. + + This calculation is done using the shift-register method of multiplying and + taking the remainder. The register is initialized to zero, and for each + incoming bit, x^32 is added mod p to the register if the bit is a one (where + x^32 mod p is p+x^32 = x^26+...+1), and the register is multiplied mod p by + x (which is shifting right by one and adding x^32 mod p if the bit shifted + out is a one). We start with the highest power (least significant bit) of + q and repeat for all eight bits of q. + + The table is simply the CRC of all possible eight bit values. This is all + the information needed to generate CRC's on data a byte at a time for all + combinations of CRC register values and incoming bytes. +*/ +local void make_crc_table() +{ + uLong c; + int n, k; + uLong poly; /* polynomial exclusive-or pattern */ + /* terms of polynomial defining this crc (except x^32): */ + static const Byte p[] = {0,1,2,4,5,7,8,10,11,12,16,22,23,26}; + + /* make exclusive-or pattern from polynomial (0xedb88320L) */ + poly = 0L; + for (n = 0; n < sizeof(p)/sizeof(Byte); n++) + poly |= 1L << (31 - p[n]); + + for (n = 0; n < 256; n++) + { + c = (uLong)n; + for (k = 0; k < 8; k++) + c = c & 1 ? poly ^ (c >> 1) : c >> 1; + crc_table[n] = c; + } + crc_table_empty = 0; +} +#else +/* ======================================================================== + * Table of CRC-32's of all single-byte values (made by make_crc_table) + */ +local const uLongf crc_table[256] = { + 0x00000000L, 0x77073096L, 0xee0e612cL, 0x990951baL, 0x076dc419L, + 0x706af48fL, 0xe963a535L, 0x9e6495a3L, 0x0edb8832L, 0x79dcb8a4L, + 0xe0d5e91eL, 0x97d2d988L, 0x09b64c2bL, 0x7eb17cbdL, 0xe7b82d07L, + 0x90bf1d91L, 0x1db71064L, 0x6ab020f2L, 0xf3b97148L, 0x84be41deL, + 0x1adad47dL, 0x6ddde4ebL, 0xf4d4b551L, 0x83d385c7L, 0x136c9856L, + 0x646ba8c0L, 0xfd62f97aL, 0x8a65c9ecL, 0x14015c4fL, 0x63066cd9L, + 0xfa0f3d63L, 0x8d080df5L, 0x3b6e20c8L, 0x4c69105eL, 0xd56041e4L, + 0xa2677172L, 0x3c03e4d1L, 0x4b04d447L, 0xd20d85fdL, 0xa50ab56bL, + 0x35b5a8faL, 0x42b2986cL, 0xdbbbc9d6L, 0xacbcf940L, 0x32d86ce3L, + 0x45df5c75L, 0xdcd60dcfL, 0xabd13d59L, 0x26d930acL, 0x51de003aL, + 0xc8d75180L, 0xbfd06116L, 0x21b4f4b5L, 0x56b3c423L, 0xcfba9599L, + 0xb8bda50fL, 0x2802b89eL, 0x5f058808L, 0xc60cd9b2L, 0xb10be924L, + 0x2f6f7c87L, 0x58684c11L, 0xc1611dabL, 0xb6662d3dL, 0x76dc4190L, + 0x01db7106L, 0x98d220bcL, 0xefd5102aL, 0x71b18589L, 0x06b6b51fL, + 0x9fbfe4a5L, 0xe8b8d433L, 0x7807c9a2L, 0x0f00f934L, 0x9609a88eL, + 0xe10e9818L, 0x7f6a0dbbL, 0x086d3d2dL, 0x91646c97L, 0xe6635c01L, + 0x6b6b51f4L, 0x1c6c6162L, 0x856530d8L, 0xf262004eL, 0x6c0695edL, + 0x1b01a57bL, 0x8208f4c1L, 0xf50fc457L, 0x65b0d9c6L, 0x12b7e950L, + 0x8bbeb8eaL, 0xfcb9887cL, 0x62dd1ddfL, 0x15da2d49L, 0x8cd37cf3L, + 0xfbd44c65L, 0x4db26158L, 0x3ab551ceL, 0xa3bc0074L, 0xd4bb30e2L, + 0x4adfa541L, 0x3dd895d7L, 0xa4d1c46dL, 0xd3d6f4fbL, 0x4369e96aL, + 0x346ed9fcL, 0xad678846L, 0xda60b8d0L, 0x44042d73L, 0x33031de5L, + 0xaa0a4c5fL, 0xdd0d7cc9L, 0x5005713cL, 0x270241aaL, 0xbe0b1010L, + 0xc90c2086L, 0x5768b525L, 0x206f85b3L, 0xb966d409L, 0xce61e49fL, + 0x5edef90eL, 0x29d9c998L, 0xb0d09822L, 0xc7d7a8b4L, 0x59b33d17L, + 0x2eb40d81L, 0xb7bd5c3bL, 0xc0ba6cadL, 0xedb88320L, 0x9abfb3b6L, + 0x03b6e20cL, 0x74b1d29aL, 0xead54739L, 0x9dd277afL, 0x04db2615L, + 0x73dc1683L, 0xe3630b12L, 0x94643b84L, 0x0d6d6a3eL, 0x7a6a5aa8L, + 0xe40ecf0bL, 0x9309ff9dL, 0x0a00ae27L, 0x7d079eb1L, 0xf00f9344L, + 0x8708a3d2L, 0x1e01f268L, 0x6906c2feL, 0xf762575dL, 0x806567cbL, + 0x196c3671L, 0x6e6b06e7L, 0xfed41b76L, 0x89d32be0L, 0x10da7a5aL, + 0x67dd4accL, 0xf9b9df6fL, 0x8ebeeff9L, 0x17b7be43L, 0x60b08ed5L, + 0xd6d6a3e8L, 0xa1d1937eL, 0x38d8c2c4L, 0x4fdff252L, 0xd1bb67f1L, + 0xa6bc5767L, 0x3fb506ddL, 0x48b2364bL, 0xd80d2bdaL, 0xaf0a1b4cL, + 0x36034af6L, 0x41047a60L, 0xdf60efc3L, 0xa867df55L, 0x316e8eefL, + 0x4669be79L, 0xcb61b38cL, 0xbc66831aL, 0x256fd2a0L, 0x5268e236L, + 0xcc0c7795L, 0xbb0b4703L, 0x220216b9L, 0x5505262fL, 0xc5ba3bbeL, + 0xb2bd0b28L, 0x2bb45a92L, 0x5cb36a04L, 0xc2d7ffa7L, 0xb5d0cf31L, + 0x2cd99e8bL, 0x5bdeae1dL, 0x9b64c2b0L, 0xec63f226L, 0x756aa39cL, + 0x026d930aL, 0x9c0906a9L, 0xeb0e363fL, 0x72076785L, 0x05005713L, + 0x95bf4a82L, 0xe2b87a14L, 0x7bb12baeL, 0x0cb61b38L, 0x92d28e9bL, + 0xe5d5be0dL, 0x7cdcefb7L, 0x0bdbdf21L, 0x86d3d2d4L, 0xf1d4e242L, + 0x68ddb3f8L, 0x1fda836eL, 0x81be16cdL, 0xf6b9265bL, 0x6fb077e1L, + 0x18b74777L, 0x88085ae6L, 0xff0f6a70L, 0x66063bcaL, 0x11010b5cL, + 0x8f659effL, 0xf862ae69L, 0x616bffd3L, 0x166ccf45L, 0xa00ae278L, + 0xd70dd2eeL, 0x4e048354L, 0x3903b3c2L, 0xa7672661L, 0xd06016f7L, + 0x4969474dL, 0x3e6e77dbL, 0xaed16a4aL, 0xd9d65adcL, 0x40df0b66L, + 0x37d83bf0L, 0xa9bcae53L, 0xdebb9ec5L, 0x47b2cf7fL, 0x30b5ffe9L, + 0xbdbdf21cL, 0xcabac28aL, 0x53b39330L, 0x24b4a3a6L, 0xbad03605L, + 0xcdd70693L, 0x54de5729L, 0x23d967bfL, 0xb3667a2eL, 0xc4614ab8L, + 0x5d681b02L, 0x2a6f2b94L, 0xb40bbe37L, 0xc30c8ea1L, 0x5a05df1bL, + 0x2d02ef8dL +}; +#endif + +/* ========================================================================= + * This function can be used by asm versions of crc32() + */ +const uLongf * ZEXPORT get_crc_table() +{ +#ifdef DYNAMIC_CRC_TABLE + if (crc_table_empty) make_crc_table(); +#endif + return (const uLongf *)crc_table; +} + +/* ========================================================================= */ +#define DO1(buf) crc = crc_table[((int)crc ^ (*buf++)) & 0xff] ^ (crc >> 8); +#define DO2(buf) DO1(buf); DO1(buf); +#define DO4(buf) DO2(buf); DO2(buf); +#define DO8(buf) DO4(buf); DO4(buf); + +/* ========================================================================= */ +uLong ZEXPORT crc32(crc, buf, len) + uLong crc; + const Bytef *buf; + uInt len; +{ + if (buf == Z_NULL) return 0L; +#ifdef DYNAMIC_CRC_TABLE + if (crc_table_empty) + make_crc_table(); +#endif + crc = crc ^ 0xffffffffL; + while (len >= 8) + { + DO8(buf); + len -= 8; + } + if (len) do { + DO1(buf); + } while (--len); + return crc ^ 0xffffffffL; +} diff --git a/Utilities/cmzlib/deflate.c b/Utilities/cmzlib/deflate.c new file mode 100644 index 0000000..7e57dff --- /dev/null +++ b/Utilities/cmzlib/deflate.c @@ -0,0 +1,1350 @@ +/* deflate.c -- compress data using the deflation algorithm + * Copyright (C) 1995-2002 Jean-loup Gailly. + * For conditions of distribution and use, see copyright notice in zlib.h + */ + +/* + * ALGORITHM + * + * The "deflation" process depends on being able to identify portions + * of the input text which are identical to earlier input (within a + * sliding window trailing behind the input currently being processed). + * + * The most straightforward technique turns out to be the fastest for + * most input files: try all possible matches and select the longest. + * The key feature of this algorithm is that insertions into the string + * dictionary are very simple and thus fast, and deletions are avoided + * completely. Insertions are performed at each input character, whereas + * string matches are performed only when the previous match ends. So it + * is preferable to spend more time in matches to allow very fast string + * insertions and avoid deletions. The matching algorithm for small + * strings is inspired from that of Rabin & Karp. A brute force approach + * is used to find longer strings when a small match has been found. + * A similar algorithm is used in comic (by Jan-Mark Wams) and freeze + * (by Leonid Broukhis). + * A previous version of this file used a more sophisticated algorithm + * (by Fiala and Greene) which is guaranteed to run in linear amortized + * time, but has a larger average cost, uses more memory and is patented. + * However the F&G algorithm may be faster for some highly redundant + * files if the parameter max_chain_length (described below) is too large. + * + * ACKNOWLEDGEMENTS + * + * The idea of lazy evaluation of matches is due to Jan-Mark Wams, and + * I found it in 'freeze' written by Leonid Broukhis. + * Thanks to many people for bug reports and testing. + * + * REFERENCES + * + * Deutsch, L.P.,"DEFLATE Compressed Data Format Specification". + * Available in ftp://ds.internic.net/rfc/rfc1951.txt + * + * A description of the Rabin and Karp algorithm is given in the book + * "Algorithms" by R. Sedgewick, Addison-Wesley, p252. + * + * Fiala,E.R., and Greene,D.H. + * Data Compression with Finite Windows, Comm.ACM, 32,4 (1989) 490-595 + * + */ + +/* @(#) $Id$ */ + +#include "deflate.h" + +const char deflate_copyright[] = + " deflate 1.1.4 Copyright 1995-2002 Jean-loup Gailly "; +/* + If you use the zlib library in a product, an acknowledgment is welcome + in the documentation of your product. If for some reason you cannot + include such an acknowledgment, I would appreciate that you keep this + copyright string in the executable of your product. + */ + +/* =========================================================================== + * Function prototypes. + */ +typedef enum { + need_more, /* block not completed, need more input or more output */ + block_done, /* block flush performed */ + finish_started, /* finish started, need only more output at next deflate */ + finish_done /* finish done, accept no more input or output */ +} block_state; + +typedef block_state (*compress_func) OF((deflate_state *s, int flush)); +/* Compression function. Returns the block state after the call. */ + +local void fill_window OF((deflate_state *s)); +local block_state deflate_stored OF((deflate_state *s, int flush)); +local block_state deflate_fast OF((deflate_state *s, int flush)); +local block_state deflate_slow OF((deflate_state *s, int flush)); +local void lm_init OF((deflate_state *s)); +local void putShortMSB OF((deflate_state *s, uInt b)); +local void flush_pending OF((z_streamp strm)); +local int read_buf OF((z_streamp strm, Bytef *buf, unsigned size)); +#ifdef ASMV + void match_init OF((void)); /* asm code initialization */ + uInt longest_match OF((deflate_state *s, IPos cur_match)); +#else +local uInt longest_match OF((deflate_state *s, IPos cur_match)); +#endif + +#ifdef DEBUG +local void check_match OF((deflate_state *s, IPos start, IPos match, + int length)); +#endif + +/* =========================================================================== + * Local data + */ + +#define NIL 0 +/* Tail of hash chains */ + +#ifndef TOO_FAR +# define TOO_FAR 4096 +#endif +/* Matches of length 3 are discarded if their distance exceeds TOO_FAR */ + +#define MIN_LOOKAHEAD (MAX_MATCH+MIN_MATCH+1) +/* Minimum amount of lookahead, except at the end of the input file. + * See deflate.c for comments about the MIN_MATCH+1. + */ + +/* Values for max_lazy_match, good_match and max_chain_length, depending on + * the desired pack level (0..9). The values given below have been tuned to + * exclude worst case performance for pathological files. Better values may be + * found for specific files. + */ +typedef struct config_s { + ush good_length; /* reduce lazy search above this match length */ + ush max_lazy; /* do not perform lazy search above this match length */ + ush nice_length; /* quit search above this match length */ + ush max_chain; + compress_func func; +} config; + +local const config configuration_table[10] = { +/* good lazy nice chain */ +/* 0 */ {0, 0, 0, 0, deflate_stored}, /* store only */ +/* 1 */ {4, 4, 8, 4, deflate_fast}, /* maximum speed, no lazy matches */ +/* 2 */ {4, 5, 16, 8, deflate_fast}, +/* 3 */ {4, 6, 32, 32, deflate_fast}, + +/* 4 */ {4, 4, 16, 16, deflate_slow}, /* lazy matches */ +/* 5 */ {8, 16, 32, 32, deflate_slow}, +/* 6 */ {8, 16, 128, 128, deflate_slow}, +/* 7 */ {8, 32, 128, 256, deflate_slow}, +/* 8 */ {32, 128, 258, 1024, deflate_slow}, +/* 9 */ {32, 258, 258, 4096, deflate_slow}}; /* maximum compression */ + +/* Note: the deflate() code requires max_lazy >= MIN_MATCH and max_chain >= 4 + * For deflate_fast() (levels <= 3) good is ignored and lazy has a different + * meaning. + */ + +#define EQUAL 0 +/* result of memcmp for equal strings */ + +struct static_tree_desc_s {int dummy;}; /* for buggy compilers */ + +/* =========================================================================== + * Update a hash value with the given input byte + * IN assertion: all calls to to UPDATE_HASH are made with consecutive + * input characters, so that a running hash key can be computed from the + * previous key instead of complete recalculation each time. + */ +#define UPDATE_HASH(s,h,c) (h = (((h)<<s->hash_shift) ^ (c)) & s->hash_mask) + + +/* =========================================================================== + * Insert string str in the dictionary and set match_head to the previous head + * of the hash chain (the most recent string with same hash key). Return + * the previous length of the hash chain. + * If this file is compiled with -DFASTEST, the compression level is forced + * to 1, and no hash chains are maintained. + * IN assertion: all calls to to INSERT_STRING are made with consecutive + * input characters and the first MIN_MATCH bytes of str are valid + * (except for the last MIN_MATCH-1 bytes of the input file). + */ +#ifdef FASTEST +#define INSERT_STRING(s, str, match_head) \ + (UPDATE_HASH(s, s->ins_h, s->window[(str) + (MIN_MATCH-1)]), \ + match_head = s->head[s->ins_h], \ + s->head[s->ins_h] = (Pos)(str)) +#else +#define INSERT_STRING(s, str, match_head) \ + (UPDATE_HASH(s, s->ins_h, s->window[(str) + (MIN_MATCH-1)]), \ + s->prev[(str) & s->w_mask] = match_head = s->head[s->ins_h], \ + s->head[s->ins_h] = (Pos)(str)) +#endif + +/* =========================================================================== + * Initialize the hash table (avoiding 64K overflow for 16 bit systems). + * prev[] will be initialized on the fly. + */ +#define CLEAR_HASH(s) \ + s->head[s->hash_size-1] = NIL; \ + zmemzero((Bytef *)s->head, (unsigned)(s->hash_size-1)*sizeof(*s->head)); + +/* ========================================================================= */ +int ZEXPORT deflateInit_(strm, level, version, stream_size) + z_streamp strm; + int level; + const char *version; + int stream_size; +{ + return deflateInit2_(strm, level, Z_DEFLATED, MAX_WBITS, DEF_MEM_LEVEL, + Z_DEFAULT_STRATEGY, version, stream_size); + /* To do: ignore strm->next_in if we use it as window */ +} + +/* ========================================================================= */ +int ZEXPORT deflateInit2_(strm, level, method, windowBits, memLevel, strategy, + version, stream_size) + z_streamp strm; + int level; + int method; + int windowBits; + int memLevel; + int strategy; + const char *version; + int stream_size; +{ + deflate_state *s; + int noheader = 0; + static const char* my_version = ZLIB_VERSION; + + ushf *overlay; + /* We overlay pending_buf and d_buf+l_buf. This works since the average + * output size for (length,distance) codes is <= 24 bits. + */ + + if (version == Z_NULL || version[0] != my_version[0] || + stream_size != sizeof(z_stream)) { + return Z_VERSION_ERROR; + } + if (strm == Z_NULL) return Z_STREAM_ERROR; + + strm->msg = Z_NULL; + if (strm->zalloc == Z_NULL) { + strm->zalloc = zcalloc; + strm->opaque = (voidpf)0; + } + if (strm->zfree == Z_NULL) strm->zfree = zcfree; + + if (level == Z_DEFAULT_COMPRESSION) level = 6; +#ifdef FASTEST + level = 1; +#endif + + if (windowBits < 0) { /* undocumented feature: suppress zlib header */ + noheader = 1; + windowBits = -windowBits; + } + if (memLevel < 1 || memLevel > MAX_MEM_LEVEL || method != Z_DEFLATED || + windowBits < 9 || windowBits > 15 || level < 0 || level > 9 || + strategy < 0 || strategy > Z_HUFFMAN_ONLY) { + return Z_STREAM_ERROR; + } + s = (deflate_state *) ZALLOC(strm, 1, sizeof(deflate_state)); + if (s == Z_NULL) return Z_MEM_ERROR; + strm->state = (struct internal_state FAR *)s; + s->strm = strm; + + s->noheader = noheader; + s->w_bits = windowBits; + s->w_size = 1 << s->w_bits; + s->w_mask = s->w_size - 1; + + s->hash_bits = memLevel + 7; + s->hash_size = 1 << s->hash_bits; + s->hash_mask = s->hash_size - 1; + s->hash_shift = ((s->hash_bits+MIN_MATCH-1)/MIN_MATCH); + + s->window = (Bytef *) ZALLOC(strm, s->w_size, 2*sizeof(Byte)); + s->prev = (Posf *) ZALLOC(strm, s->w_size, sizeof(Pos)); + s->head = (Posf *) ZALLOC(strm, s->hash_size, sizeof(Pos)); + + s->lit_bufsize = 1 << (memLevel + 6); /* 16K elements by default */ + + overlay = (ushf *) ZALLOC(strm, s->lit_bufsize, sizeof(ush)+2); + s->pending_buf = (uchf *) overlay; + s->pending_buf_size = (ulg)s->lit_bufsize * (sizeof(ush)+2L); + + if (s->window == Z_NULL || s->prev == Z_NULL || s->head == Z_NULL || + s->pending_buf == Z_NULL) { + strm->msg = (char*)ERR_MSG(Z_MEM_ERROR); + deflateEnd (strm); + return Z_MEM_ERROR; + } + s->d_buf = overlay + s->lit_bufsize/sizeof(ush); + s->l_buf = s->pending_buf + (1+sizeof(ush))*s->lit_bufsize; + + s->level = level; + s->strategy = strategy; + s->method = (Byte)method; + + return deflateReset(strm); +} + +/* ========================================================================= */ +int ZEXPORT deflateSetDictionary (strm, dictionary, dictLength) + z_streamp strm; + const Bytef *dictionary; + uInt dictLength; +{ + deflate_state *s; + uInt length = dictLength; + uInt n; + IPos hash_head = 0; + + if (strm == Z_NULL || strm->state == Z_NULL || dictionary == Z_NULL || + strm->state->status != INIT_STATE) return Z_STREAM_ERROR; + + s = strm->state; + strm->adler = adler32(strm->adler, dictionary, dictLength); + + if (length < MIN_MATCH) return Z_OK; + if (length > MAX_DIST(s)) { + length = MAX_DIST(s); +#ifndef USE_DICT_HEAD + dictionary += dictLength - length; /* use the tail of the dictionary */ +#endif + } + zmemcpy(s->window, dictionary, length); + s->strstart = length; + s->block_start = (long)length; + + /* Insert all strings in the hash table (except for the last two bytes). + * s->lookahead stays null, so s->ins_h will be recomputed at the next + * call of fill_window. + */ + s->ins_h = s->window[0]; + UPDATE_HASH(s, s->ins_h, s->window[1]); + for (n = 0; n <= length - MIN_MATCH; n++) { + INSERT_STRING(s, n, hash_head); + } + if (hash_head) hash_head = 0; /* to make compiler happy */ + return Z_OK; +} + +/* ========================================================================= */ +int ZEXPORT deflateReset (strm) + z_streamp strm; +{ + deflate_state *s; + + if (strm == Z_NULL || strm->state == Z_NULL || + strm->zalloc == Z_NULL || strm->zfree == Z_NULL) return Z_STREAM_ERROR; + + strm->total_in = strm->total_out = 0; + strm->msg = Z_NULL; /* use zfree if we ever allocate msg dynamically */ + strm->data_type = Z_UNKNOWN; + + s = (deflate_state *)strm->state; + s->pending = 0; + s->pending_out = s->pending_buf; + + if (s->noheader < 0) { + s->noheader = 0; /* was set to -1 by deflate(..., Z_FINISH); */ + } + s->status = s->noheader ? BUSY_STATE : INIT_STATE; + strm->adler = 1; + s->last_flush = Z_NO_FLUSH; + + _tr_init(s); + lm_init(s); + + return Z_OK; +} + +/* ========================================================================= */ +int ZEXPORT deflateParams(strm, level, strategy) + z_streamp strm; + int level; + int strategy; +{ + deflate_state *s; + compress_func func; + int err = Z_OK; + + if (strm == Z_NULL || strm->state == Z_NULL) return Z_STREAM_ERROR; + s = strm->state; + + if (level == Z_DEFAULT_COMPRESSION) { + level = 6; + } + if (level < 0 || level > 9 || strategy < 0 || strategy > Z_HUFFMAN_ONLY) { + return Z_STREAM_ERROR; + } + func = configuration_table[s->level].func; + + if (func != configuration_table[level].func && strm->total_in != 0) { + /* Flush the last buffer: */ + err = deflate(strm, Z_PARTIAL_FLUSH); + } + if (s->level != level) { + s->level = level; + s->max_lazy_match = configuration_table[level].max_lazy; + s->good_match = configuration_table[level].good_length; + s->nice_match = configuration_table[level].nice_length; + s->max_chain_length = configuration_table[level].max_chain; + } + s->strategy = strategy; + return err; +} + +/* ========================================================================= + * Put a short in the pending buffer. The 16-bit value is put in MSB order. + * IN assertion: the stream state is correct and there is enough room in + * pending_buf. + */ +local void putShortMSB (s, b) + deflate_state *s; + uInt b; +{ + put_byte(s, (Byte)(b >> 8)); + put_byte(s, (Byte)(b & 0xff)); +} + +/* ========================================================================= + * Flush as much pending output as possible. All deflate() output goes + * through this function so some applications may wish to modify it + * to avoid allocating a large strm->next_out buffer and copying into it. + * (See also read_buf()). + */ +local void flush_pending(strm) + z_streamp strm; +{ + unsigned len = strm->state->pending; + + if (len > strm->avail_out) len = strm->avail_out; + if (len == 0) return; + + zmemcpy(strm->next_out, strm->state->pending_out, len); + strm->next_out += len; + strm->state->pending_out += len; + strm->total_out += len; + strm->avail_out -= len; + strm->state->pending -= len; + if (strm->state->pending == 0) { + strm->state->pending_out = strm->state->pending_buf; + } +} + +/* ========================================================================= */ +int ZEXPORT deflate (strm, flush) + z_streamp strm; + int flush; +{ + int old_flush; /* value of flush param for previous deflate call */ + deflate_state *s; + + if (strm == Z_NULL || strm->state == Z_NULL || + flush > Z_FINISH || flush < 0) { + return Z_STREAM_ERROR; + } + s = strm->state; + + if (strm->next_out == Z_NULL || + (strm->next_in == Z_NULL && strm->avail_in != 0) || + (s->status == FINISH_STATE && flush != Z_FINISH)) { + ERR_RETURN(strm, Z_STREAM_ERROR); + } + if (strm->avail_out == 0) ERR_RETURN(strm, Z_BUF_ERROR); + + s->strm = strm; /* just in case */ + old_flush = s->last_flush; + s->last_flush = flush; + + /* Write the zlib header */ + if (s->status == INIT_STATE) { + + uInt header = (Z_DEFLATED + ((s->w_bits-8)<<4)) << 8; + uInt level_flags = (s->level-1) >> 1; + + if (level_flags > 3) level_flags = 3; + header |= (level_flags << 6); + if (s->strstart != 0) header |= PRESET_DICT; + header += 31 - (header % 31); + + s->status = BUSY_STATE; + putShortMSB(s, header); + + /* Save the adler32 of the preset dictionary: */ + if (s->strstart != 0) { + putShortMSB(s, (uInt)(strm->adler >> 16)); + putShortMSB(s, (uInt)(strm->adler & 0xffff)); + } + strm->adler = 1L; + } + + /* Flush as much pending output as possible */ + if (s->pending != 0) { + flush_pending(strm); + if (strm->avail_out == 0) { + /* Since avail_out is 0, deflate will be called again with + * more output space, but possibly with both pending and + * avail_in equal to zero. There won't be anything to do, + * but this is not an error situation so make sure we + * return OK instead of BUF_ERROR at next call of deflate: + */ + s->last_flush = -1; + return Z_OK; + } + + /* Make sure there is something to do and avoid duplicate consecutive + * flushes. For repeated and useless calls with Z_FINISH, we keep + * returning Z_STREAM_END instead of Z_BUFF_ERROR. + */ + } else if (strm->avail_in == 0 && flush <= old_flush && + flush != Z_FINISH) { + ERR_RETURN(strm, Z_BUF_ERROR); + } + + /* User must not provide more input after the first FINISH: */ + if (s->status == FINISH_STATE && strm->avail_in != 0) { + ERR_RETURN(strm, Z_BUF_ERROR); + } + + /* Start a new block or continue the current one. + */ + if (strm->avail_in != 0 || s->lookahead != 0 || + (flush != Z_NO_FLUSH && s->status != FINISH_STATE)) { + block_state bstate; + + bstate = (*(configuration_table[s->level].func))(s, flush); + + if (bstate == finish_started || bstate == finish_done) { + s->status = FINISH_STATE; + } + if (bstate == need_more || bstate == finish_started) { + if (strm->avail_out == 0) { + s->last_flush = -1; /* avoid BUF_ERROR next call, see above */ + } + return Z_OK; + /* If flush != Z_NO_FLUSH && avail_out == 0, the next call + * of deflate should use the same flush parameter to make sure + * that the flush is complete. So we don't have to output an + * empty block here, this will be done at next call. This also + * ensures that for a very small output buffer, we emit at most + * one empty block. + */ + } + if (bstate == block_done) { + if (flush == Z_PARTIAL_FLUSH) { + _tr_align(s); + } else { /* FULL_FLUSH or SYNC_FLUSH */ + _tr_stored_block(s, (char*)0, 0L, 0); + /* For a full flush, this empty block will be recognized + * as a special marker by inflate_sync(). + */ + if (flush == Z_FULL_FLUSH) { + CLEAR_HASH(s); /* forget history */ + } + } + flush_pending(strm); + if (strm->avail_out == 0) { + s->last_flush = -1; /* avoid BUF_ERROR at next call, see above */ + return Z_OK; + } + } + } + Assert(strm->avail_out > 0, "bug2"); + + if (flush != Z_FINISH) return Z_OK; + if (s->noheader) return Z_STREAM_END; + + /* Write the zlib trailer (adler32) */ + putShortMSB(s, (uInt)(strm->adler >> 16)); + putShortMSB(s, (uInt)(strm->adler & 0xffff)); + flush_pending(strm); + /* If avail_out is zero, the application will call deflate again + * to flush the rest. + */ + s->noheader = -1; /* write the trailer only once! */ + return s->pending != 0 ? Z_OK : Z_STREAM_END; +} + +/* ========================================================================= */ +int ZEXPORT deflateEnd (strm) + z_streamp strm; +{ + int status; + + if (strm == Z_NULL || strm->state == Z_NULL) return Z_STREAM_ERROR; + + status = strm->state->status; + if (status != INIT_STATE && status != BUSY_STATE && + status != FINISH_STATE) { + return Z_STREAM_ERROR; + } + + /* Deallocate in reverse order of allocations: */ + TRY_FREE(strm, strm->state->pending_buf); + TRY_FREE(strm, strm->state->head); + TRY_FREE(strm, strm->state->prev); + TRY_FREE(strm, strm->state->window); + + ZFREE(strm, strm->state); + strm->state = Z_NULL; + + return status == BUSY_STATE ? Z_DATA_ERROR : Z_OK; +} + +/* ========================================================================= + * Copy the source state to the destination state. + * To simplify the source, this is not supported for 16-bit MSDOS (which + * doesn't have enough memory anyway to duplicate compression states). + */ +int ZEXPORT deflateCopy (dest, source) + z_streamp dest; + z_streamp source; +{ +#ifdef MAXSEG_64K + return Z_STREAM_ERROR; +#else + deflate_state *ds; + deflate_state *ss; + ushf *overlay; + + + if (source == Z_NULL || dest == Z_NULL || source->state == Z_NULL) { + return Z_STREAM_ERROR; + } + + ss = source->state; + + *dest = *source; + + ds = (deflate_state *) ZALLOC(dest, 1, sizeof(deflate_state)); + if (ds == Z_NULL) return Z_MEM_ERROR; + dest->state = (struct internal_state FAR *) ds; + *ds = *ss; + ds->strm = dest; + + ds->window = (Bytef *) ZALLOC(dest, ds->w_size, 2*sizeof(Byte)); + ds->prev = (Posf *) ZALLOC(dest, ds->w_size, sizeof(Pos)); + ds->head = (Posf *) ZALLOC(dest, ds->hash_size, sizeof(Pos)); + overlay = (ushf *) ZALLOC(dest, ds->lit_bufsize, sizeof(ush)+2); + ds->pending_buf = (uchf *) overlay; + + if (ds->window == Z_NULL || ds->prev == Z_NULL || ds->head == Z_NULL || + ds->pending_buf == Z_NULL) { + deflateEnd (dest); + return Z_MEM_ERROR; + } + /* following zmemcpy do not work for 16-bit MSDOS */ + zmemcpy(ds->window, ss->window, ds->w_size * 2 * sizeof(Byte)); + zmemcpy(ds->prev, ss->prev, ds->w_size * sizeof(Pos)); + zmemcpy(ds->head, ss->head, ds->hash_size * sizeof(Pos)); + zmemcpy(ds->pending_buf, ss->pending_buf, (uInt)ds->pending_buf_size); + + ds->pending_out = ds->pending_buf + (ss->pending_out - ss->pending_buf); + ds->d_buf = overlay + ds->lit_bufsize/sizeof(ush); + ds->l_buf = ds->pending_buf + (1+sizeof(ush))*ds->lit_bufsize; + + ds->l_desc.dyn_tree = ds->dyn_ltree; + ds->d_desc.dyn_tree = ds->dyn_dtree; + ds->bl_desc.dyn_tree = ds->bl_tree; + + return Z_OK; +#endif +} + +/* =========================================================================== + * Read a new buffer from the current input stream, update the adler32 + * and total number of bytes read. All deflate() input goes through + * this function so some applications may wish to modify it to avoid + * allocating a large strm->next_in buffer and copying from it. + * (See also flush_pending()). + */ +local int read_buf(strm, buf, size) + z_streamp strm; + Bytef *buf; + unsigned size; +{ + unsigned len = strm->avail_in; + + if (len > size) len = size; + if (len == 0) return 0; + + strm->avail_in -= len; + + if (!strm->state->noheader) { + strm->adler = adler32(strm->adler, strm->next_in, len); + } + zmemcpy(buf, strm->next_in, len); + strm->next_in += len; + strm->total_in += len; + + return (int)len; +} + +/* =========================================================================== + * Initialize the "longest match" routines for a new zlib stream + */ +local void lm_init (s) + deflate_state *s; +{ + s->window_size = (ulg)2L*s->w_size; + + CLEAR_HASH(s); + + /* Set the default configuration parameters: + */ + s->max_lazy_match = configuration_table[s->level].max_lazy; + s->good_match = configuration_table[s->level].good_length; + s->nice_match = configuration_table[s->level].nice_length; + s->max_chain_length = configuration_table[s->level].max_chain; + + s->strstart = 0; + s->block_start = 0L; + s->lookahead = 0; + s->match_length = s->prev_length = MIN_MATCH-1; + s->match_available = 0; + s->ins_h = 0; +#ifdef ASMV + match_init(); /* initialize the asm code */ +#endif +} + +/* =========================================================================== + * Set match_start to the longest match starting at the given string and + * return its length. Matches shorter or equal to prev_length are discarded, + * in which case the result is equal to prev_length and match_start is + * garbage. + * IN assertions: cur_match is the head of the hash chain for the current + * string (strstart) and its distance is <= MAX_DIST, and prev_length >= 1 + * OUT assertion: the match length is not greater than s->lookahead. + */ +#ifndef ASMV +/* For 80x86 and 680x0, an optimized version will be provided in match.asm or + * match.S. The code will be functionally equivalent. + */ +#ifndef FASTEST +local uInt longest_match(s, cur_match) + deflate_state *s; + IPos cur_match; /* current match */ +{ + unsigned chain_length = s->max_chain_length;/* max hash chain length */ + register Bytef *scan = s->window + s->strstart; /* current string */ + register Bytef *match; /* matched string */ + register int len; /* length of current match */ + int best_len = s->prev_length; /* best match length so far */ + int nice_match = s->nice_match; /* stop if match long enough */ + IPos limit = s->strstart > (IPos)MAX_DIST(s) ? + s->strstart - (IPos)MAX_DIST(s) : NIL; + /* Stop when cur_match becomes <= limit. To simplify the code, + * we prevent matches with the string of window index 0. + */ + Posf *prev = s->prev; + uInt wmask = s->w_mask; + +#ifdef UNALIGNED_OK + /* Compare two bytes at a time. Note: this is not always beneficial. + * Try with and without -DUNALIGNED_OK to check. + */ + register Bytef *strend = s->window + s->strstart + MAX_MATCH - 1; + register ush scan_start = *(ushf*)scan; + register ush scan_end = *(ushf*)(scan+best_len-1); +#else + register Bytef *strend = s->window + s->strstart + MAX_MATCH; + register Byte scan_end1 = scan[best_len-1]; + register Byte scan_end = scan[best_len]; +#endif + + /* The code is optimized for HASH_BITS >= 8 and MAX_MATCH-2 multiple of 16. + * It is easy to get rid of this optimization if necessary. + */ + Assert(s->hash_bits >= 8 && MAX_MATCH == 258, "Code too clever"); + + /* Do not waste too much time if we already have a good match: */ + if (s->prev_length >= s->good_match) { + chain_length >>= 2; + } + /* Do not look for matches beyond the end of the input. This is necessary + * to make deflate deterministic. + */ + if ((uInt)nice_match > s->lookahead) nice_match = s->lookahead; + + Assert((ulg)s->strstart <= s->window_size-MIN_LOOKAHEAD, "need lookahead"); + + do { + Assert(cur_match < s->strstart, "no future"); + match = s->window + cur_match; + + /* Skip to next match if the match length cannot increase + * or if the match length is less than 2: + */ +#if (defined(UNALIGNED_OK) && MAX_MATCH == 258) + /* This code assumes sizeof(unsigned short) == 2. Do not use + * UNALIGNED_OK if your compiler uses a different size. + */ + if (*(ushf*)(match+best_len-1) != scan_end || + *(ushf*)match != scan_start) continue; + + /* It is not necessary to compare scan[2] and match[2] since they are + * always equal when the other bytes match, given that the hash keys + * are equal and that HASH_BITS >= 8. Compare 2 bytes at a time at + * strstart+3, +5, ... up to strstart+257. We check for insufficient + * lookahead only every 4th comparison; the 128th check will be made + * at strstart+257. If MAX_MATCH-2 is not a multiple of 8, it is + * necessary to put more guard bytes at the end of the window, or + * to check more often for insufficient lookahead. + */ + Assert(scan[2] == match[2], "scan[2]?"); + scan++, match++; + do { + } while (*(ushf*)(scan+=2) == *(ushf*)(match+=2) && + *(ushf*)(scan+=2) == *(ushf*)(match+=2) && + *(ushf*)(scan+=2) == *(ushf*)(match+=2) && + *(ushf*)(scan+=2) == *(ushf*)(match+=2) && + scan < strend); + /* The funny "do {}" generates better code on most compilers */ + + /* Here, scan <= window+strstart+257 */ + Assert(scan <= s->window+(unsigned)(s->window_size-1), "wild scan"); + if (*scan == *match) scan++; + + len = (MAX_MATCH - 1) - (int)(strend-scan); + scan = strend - (MAX_MATCH-1); + +#else /* UNALIGNED_OK */ + + if (match[best_len] != scan_end || + match[best_len-1] != scan_end1 || + *match != *scan || + *++match != scan[1]) continue; + + /* The check at best_len-1 can be removed because it will be made + * again later. (This heuristic is not always a win.) + * It is not necessary to compare scan[2] and match[2] since they + * are always equal when the other bytes match, given that + * the hash keys are equal and that HASH_BITS >= 8. + */ + scan += 2, match++; + Assert(*scan == *match, "match[2]?"); + + /* We check for insufficient lookahead only every 8th comparison; + * the 256th check will be made at strstart+258. + */ + do { + } while (*++scan == *++match && *++scan == *++match && + *++scan == *++match && *++scan == *++match && + *++scan == *++match && *++scan == *++match && + *++scan == *++match && *++scan == *++match && + scan < strend); + + Assert(scan <= s->window+(unsigned)(s->window_size-1), "wild scan"); + + len = MAX_MATCH - (int)(strend - scan); + scan = strend - MAX_MATCH; + +#endif /* UNALIGNED_OK */ + + if (len > best_len) { + s->match_start = cur_match; + best_len = len; + if (len >= nice_match) break; +#ifdef UNALIGNED_OK + scan_end = *(ushf*)(scan+best_len-1); +#else + scan_end1 = scan[best_len-1]; + scan_end = scan[best_len]; +#endif + } + } while ((cur_match = prev[cur_match & wmask]) > limit + && --chain_length != 0); + + if ((uInt)best_len <= s->lookahead) return (uInt)best_len; + return s->lookahead; +} + +#else /* FASTEST */ +/* --------------------------------------------------------------------------- + * Optimized version for level == 1 only + */ +local uInt longest_match(s, cur_match) + deflate_state *s; + IPos cur_match; /* current match */ +{ + register Bytef *scan = s->window + s->strstart; /* current string */ + register Bytef *match; /* matched string */ + register int len; /* length of current match */ + register Bytef *strend = s->window + s->strstart + MAX_MATCH; + + /* The code is optimized for HASH_BITS >= 8 and MAX_MATCH-2 multiple of 16. + * It is easy to get rid of this optimization if necessary. + */ + Assert(s->hash_bits >= 8 && MAX_MATCH == 258, "Code too clever"); + + Assert((ulg)s->strstart <= s->window_size-MIN_LOOKAHEAD, "need lookahead"); + + Assert(cur_match < s->strstart, "no future"); + + match = s->window + cur_match; + + /* Return failure if the match length is less than 2: + */ + if (match[0] != scan[0] || match[1] != scan[1]) return MIN_MATCH-1; + + /* The check at best_len-1 can be removed because it will be made + * again later. (This heuristic is not always a win.) + * It is not necessary to compare scan[2] and match[2] since they + * are always equal when the other bytes match, given that + * the hash keys are equal and that HASH_BITS >= 8. + */ + scan += 2, match += 2; + Assert(*scan == *match, "match[2]?"); + + /* We check for insufficient lookahead only every 8th comparison; + * the 256th check will be made at strstart+258. + */ + do { + } while (*++scan == *++match && *++scan == *++match && + *++scan == *++match && *++scan == *++match && + *++scan == *++match && *++scan == *++match && + *++scan == *++match && *++scan == *++match && + scan < strend); + + Assert(scan <= s->window+(unsigned)(s->window_size-1), "wild scan"); + + len = MAX_MATCH - (int)(strend - scan); + + if (len < MIN_MATCH) return MIN_MATCH - 1; + + s->match_start = cur_match; + return len <= s->lookahead ? len : s->lookahead; +} +#endif /* FASTEST */ +#endif /* ASMV */ + +#ifdef DEBUG +/* =========================================================================== + * Check that the match at match_start is indeed a match. + */ +local void check_match(s, start, match, length) + deflate_state *s; + IPos start, match; + int length; +{ + /* check that the match is indeed a match */ + if (zmemcmp(s->window + match, + s->window + start, length) != EQUAL) { + fprintf(stderr, " start %u, match %u, length %d\n", + start, match, length); + do { + fprintf(stderr, "%c%c", s->window[match++], s->window[start++]); + } while (--length != 0); + z_error("invalid match"); + } + if (z_verbose > 1) { + fprintf(stderr,"\\[%d,%d]", start-match, length); + do { putc(s->window[start++], stderr); } while (--length != 0); + } +} +#else +# define check_match(s, start, match, length) +#endif + +/* =========================================================================== + * Fill the window when the lookahead becomes insufficient. + * Updates strstart and lookahead. + * + * IN assertion: lookahead < MIN_LOOKAHEAD + * OUT assertions: strstart <= window_size-MIN_LOOKAHEAD + * At least one byte has been read, or avail_in == 0; reads are + * performed for at least two bytes (required for the zip translate_eol + * option -- not supported here). + */ +local void fill_window(s) + deflate_state *s; +{ + register unsigned n, m; + register Posf *p; + unsigned more; /* Amount of free space at the end of the window. */ + uInt wsize = s->w_size; + + do { + more = (unsigned)(s->window_size -(ulg)s->lookahead -(ulg)s->strstart); + + /* Deal with !@#$% 64K limit: */ + if (more == 0 && s->strstart == 0 && s->lookahead == 0) { + more = wsize; + + } else if (more == (unsigned)(-1)) { + /* Very unlikely, but possible on 16 bit machine if strstart == 0 + * and lookahead == 1 (input done one byte at time) + */ + more--; + + /* If the window is almost full and there is insufficient lookahead, + * move the upper half to the lower one to make room in the upper half. + */ + } else if (s->strstart >= wsize+MAX_DIST(s)) { + + zmemcpy(s->window, s->window+wsize, (unsigned)wsize); + s->match_start -= wsize; + s->strstart -= wsize; /* we now have strstart >= MAX_DIST */ + s->block_start -= (long) wsize; + + /* Slide the hash table (could be avoided with 32 bit values + at the expense of memory usage). We slide even when level == 0 + to keep the hash table consistent if we switch back to level > 0 + later. (Using level 0 permanently is not an optimal usage of + zlib, so we don't care about this pathological case.) + */ + n = s->hash_size; + p = &s->head[n]; + do { + m = *--p; + *p = (Pos)(m >= wsize ? m-wsize : NIL); + } while (--n); + + n = wsize; +#ifndef FASTEST + p = &s->prev[n]; + do { + m = *--p; + *p = (Pos)(m >= wsize ? m-wsize : NIL); + /* If n is not on any hash chain, prev[n] is garbage but + * its value will never be used. + */ + } while (--n); +#endif + more += wsize; + } + if (s->strm->avail_in == 0) return; + + /* If there was no sliding: + * strstart <= WSIZE+MAX_DIST-1 && lookahead <= MIN_LOOKAHEAD - 1 && + * more == window_size - lookahead - strstart + * => more >= window_size - (MIN_LOOKAHEAD-1 + WSIZE + MAX_DIST-1) + * => more >= window_size - 2*WSIZE + 2 + * In the BIG_MEM or MMAP case (not yet supported), + * window_size == input_size + MIN_LOOKAHEAD && + * strstart + s->lookahead <= input_size => more >= MIN_LOOKAHEAD. + * Otherwise, window_size == 2*WSIZE so more >= 2. + * If there was sliding, more >= WSIZE. So in all cases, more >= 2. + */ + Assert(more >= 2, "more < 2"); + + n = read_buf(s->strm, s->window + s->strstart + s->lookahead, more); + s->lookahead += n; + + /* Initialize the hash value now that we have some input: */ + if (s->lookahead >= MIN_MATCH) { + s->ins_h = s->window[s->strstart]; + UPDATE_HASH(s, s->ins_h, s->window[s->strstart+1]); +#if MIN_MATCH != 3 + Call UPDATE_HASH() MIN_MATCH-3 more times +#endif + } + /* If the whole input has less than MIN_MATCH bytes, ins_h is garbage, + * but this is not important since only literal bytes will be emitted. + */ + + } while (s->lookahead < MIN_LOOKAHEAD && s->strm->avail_in != 0); +} + +/* =========================================================================== + * Flush the current block, with given end-of-file flag. + * IN assertion: strstart is set to the end of the current match. + */ +#define FLUSH_BLOCK_ONLY(s, eof) { \ + _tr_flush_block(s, (s->block_start >= 0L ? \ + (charf *)&s->window[(unsigned)s->block_start] : \ + (charf *)Z_NULL), \ + (ulg)((long)s->strstart - s->block_start), \ + (eof)); \ + s->block_start = s->strstart; \ + flush_pending(s->strm); \ + Tracev((stderr,"[FLUSH]")); \ +} + +/* Same but force premature exit if necessary. */ +#define FLUSH_BLOCK(s, eof) { \ + FLUSH_BLOCK_ONLY(s, eof); \ + if (s->strm->avail_out == 0) return (eof) ? finish_started : need_more; \ +} + +/* =========================================================================== + * Copy without compression as much as possible from the input stream, return + * the current block state. + * This function does not insert new strings in the dictionary since + * uncompressible data is probably not useful. This function is used + * only for the level=0 compression option. + * NOTE: this function should be optimized to avoid extra copying from + * window to pending_buf. + */ +local block_state deflate_stored(s, flush) + deflate_state *s; + int flush; +{ + /* Stored blocks are limited to 0xffff bytes, pending_buf is limited + * to pending_buf_size, and each stored block has a 5 byte header: + */ + ulg max_block_size = 0xffff; + ulg max_start; + + if (max_block_size > s->pending_buf_size - 5) { + max_block_size = s->pending_buf_size - 5; + } + + /* Copy as much as possible from input to output: */ + for (;;) { + /* Fill the window as much as possible: */ + if (s->lookahead <= 1) { + + Assert(s->strstart < s->w_size+MAX_DIST(s) || + s->block_start >= (long)s->w_size, "slide too late"); + + fill_window(s); + if (s->lookahead == 0 && flush == Z_NO_FLUSH) return need_more; + + if (s->lookahead == 0) break; /* flush the current block */ + } + Assert(s->block_start >= 0L, "block gone"); + + s->strstart += s->lookahead; + s->lookahead = 0; + + /* Emit a stored block if pending_buf will be full: */ + max_start = s->block_start + max_block_size; + if (s->strstart == 0 || (ulg)s->strstart >= max_start) { + /* strstart == 0 is possible when wraparound on 16-bit machine */ + s->lookahead = (uInt)(s->strstart - max_start); + s->strstart = (uInt)max_start; + FLUSH_BLOCK(s, 0); + } + /* Flush if we may have to slide, otherwise block_start may become + * negative and the data will be gone: + */ + if (s->strstart - (uInt)s->block_start >= MAX_DIST(s)) { + FLUSH_BLOCK(s, 0); + } + } + FLUSH_BLOCK(s, flush == Z_FINISH); + return flush == Z_FINISH ? finish_done : block_done; +} + +/* =========================================================================== + * Compress as much as possible from the input stream, return the current + * block state. + * This function does not perform lazy evaluation of matches and inserts + * new strings in the dictionary only for unmatched strings or for short + * matches. It is used only for the fast compression options. + */ +local block_state deflate_fast(s, flush) + deflate_state *s; + int flush; +{ + IPos hash_head = NIL; /* head of the hash chain */ + int bflush; /* set if current block must be flushed */ + + for (;;) { + /* Make sure that we always have enough lookahead, except + * at the end of the input file. We need MAX_MATCH bytes + * for the next match, plus MIN_MATCH bytes to insert the + * string following the next match. + */ + if (s->lookahead < MIN_LOOKAHEAD) { + fill_window(s); + if (s->lookahead < MIN_LOOKAHEAD && flush == Z_NO_FLUSH) { + return need_more; + } + if (s->lookahead == 0) break; /* flush the current block */ + } + + /* Insert the string window[strstart .. strstart+2] in the + * dictionary, and set hash_head to the head of the hash chain: + */ + if (s->lookahead >= MIN_MATCH) { + INSERT_STRING(s, s->strstart, hash_head); + } + + /* Find the longest match, discarding those <= prev_length. + * At this point we have always match_length < MIN_MATCH + */ + if (hash_head != NIL && s->strstart - hash_head <= MAX_DIST(s)) { + /* To simplify the code, we prevent matches with the string + * of window index 0 (in particular we have to avoid a match + * of the string with itself at the start of the input file). + */ + if (s->strategy != Z_HUFFMAN_ONLY) { + s->match_length = longest_match (s, hash_head); + } + /* longest_match() sets match_start */ + } + if (s->match_length >= MIN_MATCH) { + check_match(s, s->strstart, s->match_start, s->match_length); + + _tr_tally_dist(s, s->strstart - s->match_start, + s->match_length - MIN_MATCH, bflush); + + s->lookahead -= s->match_length; + + /* Insert new strings in the hash table only if the match length + * is not too large. This saves time but degrades compression. + */ +#ifndef FASTEST + if (s->match_length <= s->max_insert_length && + s->lookahead >= MIN_MATCH) { + s->match_length--; /* string at strstart already in hash table */ + do { + s->strstart++; + INSERT_STRING(s, s->strstart, hash_head); + /* strstart never exceeds WSIZE-MAX_MATCH, so there are + * always MIN_MATCH bytes ahead. + */ + } while (--s->match_length != 0); + s->strstart++; + } else +#endif + { + s->strstart += s->match_length; + s->match_length = 0; + s->ins_h = s->window[s->strstart]; + UPDATE_HASH(s, s->ins_h, s->window[s->strstart+1]); +#if MIN_MATCH != 3 + Call UPDATE_HASH() MIN_MATCH-3 more times +#endif + /* If lookahead < MIN_MATCH, ins_h is garbage, but it does not + * matter since it will be recomputed at next deflate call. + */ + } + } else { + /* No match, output a literal byte */ + Tracevv((stderr,"%c", s->window[s->strstart])); + _tr_tally_lit (s, s->window[s->strstart], bflush); + s->lookahead--; + s->strstart++; + } + if (bflush) FLUSH_BLOCK(s, 0); + } + FLUSH_BLOCK(s, flush == Z_FINISH); + return flush == Z_FINISH ? finish_done : block_done; +} + +/* =========================================================================== + * Same as above, but achieves better compression. We use a lazy + * evaluation for matches: a match is finally adopted only if there is + * no better match at the next window position. + */ +local block_state deflate_slow(s, flush) + deflate_state *s; + int flush; +{ + IPos hash_head = NIL; /* head of hash chain */ + int bflush; /* set if current block must be flushed */ + + /* Process the input block. */ + for (;;) { + /* Make sure that we always have enough lookahead, except + * at the end of the input file. We need MAX_MATCH bytes + * for the next match, plus MIN_MATCH bytes to insert the + * string following the next match. + */ + if (s->lookahead < MIN_LOOKAHEAD) { + fill_window(s); + if (s->lookahead < MIN_LOOKAHEAD && flush == Z_NO_FLUSH) { + return need_more; + } + if (s->lookahead == 0) break; /* flush the current block */ + } + + /* Insert the string window[strstart .. strstart+2] in the + * dictionary, and set hash_head to the head of the hash chain: + */ + if (s->lookahead >= MIN_MATCH) { + INSERT_STRING(s, s->strstart, hash_head); + } + + /* Find the longest match, discarding those <= prev_length. + */ + s->prev_length = s->match_length, s->prev_match = s->match_start; + s->match_length = MIN_MATCH-1; + + if (hash_head != NIL && s->prev_length < s->max_lazy_match && + s->strstart - hash_head <= MAX_DIST(s)) { + /* To simplify the code, we prevent matches with the string + * of window index 0 (in particular we have to avoid a match + * of the string with itself at the start of the input file). + */ + if (s->strategy != Z_HUFFMAN_ONLY) { + s->match_length = longest_match (s, hash_head); + } + /* longest_match() sets match_start */ + + if (s->match_length <= 5 && (s->strategy == Z_FILTERED || + (s->match_length == MIN_MATCH && + s->strstart - s->match_start > TOO_FAR))) { + + /* If prev_match is also MIN_MATCH, match_start is garbage + * but we will ignore the current match anyway. + */ + s->match_length = MIN_MATCH-1; + } + } + /* If there was a match at the previous step and the current + * match is not better, output the previous match: + */ + if (s->prev_length >= MIN_MATCH && s->match_length <= s->prev_length) { + uInt max_insert = s->strstart + s->lookahead - MIN_MATCH; + /* Do not insert strings in hash table beyond this. */ + + check_match(s, s->strstart-1, s->prev_match, s->prev_length); + + _tr_tally_dist(s, s->strstart -1 - s->prev_match, + s->prev_length - MIN_MATCH, bflush); + + /* Insert in hash table all strings up to the end of the match. + * strstart-1 and strstart are already inserted. If there is not + * enough lookahead, the last two strings are not inserted in + * the hash table. + */ + s->lookahead -= s->prev_length-1; + s->prev_length -= 2; + do { + if (++s->strstart <= max_insert) { + INSERT_STRING(s, s->strstart, hash_head); + } + } while (--s->prev_length != 0); + s->match_available = 0; + s->match_length = MIN_MATCH-1; + s->strstart++; + + if (bflush) FLUSH_BLOCK(s, 0); + + } else if (s->match_available) { + /* If there was no match at the previous position, output a + * single literal. If there was a match but the current match + * is longer, truncate the previous match to a single literal. + */ + Tracevv((stderr,"%c", s->window[s->strstart-1])); + _tr_tally_lit(s, s->window[s->strstart-1], bflush); + if (bflush) { + FLUSH_BLOCK_ONLY(s, 0); + } + s->strstart++; + s->lookahead--; + if (s->strm->avail_out == 0) return need_more; + } else { + /* There is no previous match to compare with, wait for + * the next step to decide. + */ + s->match_available = 1; + s->strstart++; + s->lookahead--; + } + } + Assert (flush != Z_NO_FLUSH, "no flush?"); + if (s->match_available) { + Tracevv((stderr,"%c", s->window[s->strstart-1])); + _tr_tally_lit(s, s->window[s->strstart-1], bflush); + s->match_available = 0; + } + FLUSH_BLOCK(s, flush == Z_FINISH); + return flush == Z_FINISH ? finish_done : block_done; +} diff --git a/Utilities/cmzlib/deflate.h b/Utilities/cmzlib/deflate.h new file mode 100644 index 0000000..c3f8858 --- /dev/null +++ b/Utilities/cmzlib/deflate.h @@ -0,0 +1,318 @@ +/* deflate.h -- internal compression state + * Copyright (C) 1995-2002 Jean-loup Gailly + * For conditions of distribution and use, see copyright notice in zlib.h + */ + +/* WARNING: this file should *not* be used by applications. It is + part of the implementation of the compression library and is + subject to change. Applications should only use zlib.h. + */ + +/* @(#) $Id$ */ + +#ifndef _DEFLATE_H +#define _DEFLATE_H + +#include "zutil.h" + +/* =========================================================================== + * Internal compression state. + */ + +#define LENGTH_CODES 29 +/* number of length codes, not counting the special END_BLOCK code */ + +#define LITERALS 256 +/* number of literal bytes 0..255 */ + +#define L_CODES (LITERALS+1+LENGTH_CODES) +/* number of Literal or Length codes, including the END_BLOCK code */ + +#define D_CODES 30 +/* number of distance codes */ + +#define BL_CODES 19 +/* number of codes used to transfer the bit lengths */ + +#define HEAP_SIZE (2*L_CODES+1) +/* maximum heap size */ + +#define MAX_BITS 15 +/* All codes must not exceed MAX_BITS bits */ + +#define INIT_STATE 42 +#define BUSY_STATE 113 +#define FINISH_STATE 666 +/* Stream status */ + + +/* Data structure describing a single value and its code string. */ +typedef struct ct_data_s { + union { + ush freq; /* frequency count */ + ush code; /* bit string */ + } fc; + union { + ush dad; /* father node in Huffman tree */ + ush len; /* length of bit string */ + } dl; +} FAR ct_data; + +#define Freq fc.freq +#define Code fc.code +#define Dad dl.dad +#define Len dl.len + +typedef struct static_tree_desc_s static_tree_desc; + +typedef struct tree_desc_s { + ct_data *dyn_tree; /* the dynamic tree */ + int max_code; /* largest code with non zero frequency */ + static_tree_desc *stat_desc; /* the corresponding static tree */ +} FAR tree_desc; + +typedef ush Pos; +typedef Pos FAR Posf; +typedef unsigned IPos; + +/* A Pos is an index in the character window. We use short instead of int to + * save space in the various tables. IPos is used only for parameter passing. + */ + +typedef struct internal_state { + z_streamp strm; /* pointer back to this zlib stream */ + int status; /* as the name implies */ + Bytef *pending_buf; /* output still pending */ + ulg pending_buf_size; /* size of pending_buf */ + Bytef *pending_out; /* next pending byte to output to the stream */ + int pending; /* nb of bytes in the pending buffer */ + int noheader; /* suppress zlib header and adler32 */ + Byte data_type; /* UNKNOWN, BINARY or ASCII */ + Byte method; /* STORED (for zip only) or DEFLATED */ + int last_flush; /* value of flush param for previous deflate call */ + + /* used by deflate.c: */ + + uInt w_size; /* LZ77 window size (32K by default) */ + uInt w_bits; /* log2(w_size) (8..16) */ + uInt w_mask; /* w_size - 1 */ + + Bytef *window; + /* Sliding window. Input bytes are read into the second half of the window, + * and move to the first half later to keep a dictionary of at least wSize + * bytes. With this organization, matches are limited to a distance of + * wSize-MAX_MATCH bytes, but this ensures that IO is always + * performed with a length multiple of the block size. Also, it limits + * the window size to 64K, which is quite useful on MSDOS. + * To do: use the user input buffer as sliding window. + */ + + ulg window_size; + /* Actual size of window: 2*wSize, except when the user input buffer + * is directly used as sliding window. + */ + + Posf *prev; + /* Link to older string with same hash index. To limit the size of this + * array to 64K, this link is maintained only for the last 32K strings. + * An index in this array is thus a window index modulo 32K. + */ + + Posf *head; /* Heads of the hash chains or NIL. */ + + uInt ins_h; /* hash index of string to be inserted */ + uInt hash_size; /* number of elements in hash table */ + uInt hash_bits; /* log2(hash_size) */ + uInt hash_mask; /* hash_size-1 */ + + uInt hash_shift; + /* Number of bits by which ins_h must be shifted at each input + * step. It must be such that after MIN_MATCH steps, the oldest + * byte no longer takes part in the hash key, that is: + * hash_shift * MIN_MATCH >= hash_bits + */ + + long block_start; + /* Window position at the beginning of the current output block. Gets + * negative when the window is moved backwards. + */ + + uInt match_length; /* length of best match */ + IPos prev_match; /* previous match */ + int match_available; /* set if previous match exists */ + uInt strstart; /* start of string to insert */ + uInt match_start; /* start of matching string */ + uInt lookahead; /* number of valid bytes ahead in window */ + + uInt prev_length; + /* Length of the best match at previous step. Matches not greater than this + * are discarded. This is used in the lazy match evaluation. + */ + + uInt max_chain_length; + /* To speed up deflation, hash chains are never searched beyond this + * length. A higher limit improves compression ratio but degrades the + * speed. + */ + + uInt max_lazy_match; + /* Attempt to find a better match only when the current match is strictly + * smaller than this value. This mechanism is used only for compression + * levels >= 4. + */ +# define max_insert_length max_lazy_match + /* Insert new strings in the hash table only if the match length is not + * greater than this length. This saves time but degrades compression. + * max_insert_length is used only for compression levels <= 3. + */ + + int level; /* compression level (1..9) */ + int strategy; /* favor or force Huffman coding*/ + + uInt good_match; + /* Use a faster search when the previous match is longer than this */ + + int nice_match; /* Stop searching when current match exceeds this */ + + /* used by trees.c: */ + /* Didn't use ct_data typedef below to supress compiler warning */ + struct ct_data_s dyn_ltree[HEAP_SIZE]; /* literal and length tree */ + struct ct_data_s dyn_dtree[2*D_CODES+1]; /* distance tree */ + struct ct_data_s bl_tree[2*BL_CODES+1]; /* Huffman tree for bit lengths */ + + struct tree_desc_s l_desc; /* desc. for literal tree */ + struct tree_desc_s d_desc; /* desc. for distance tree */ + struct tree_desc_s bl_desc; /* desc. for bit length tree */ + + ush bl_count[MAX_BITS+1]; + /* number of codes at each bit length for an optimal tree */ + + int heap[2*L_CODES+1]; /* heap used to build the Huffman trees */ + int heap_len; /* number of elements in the heap */ + int heap_max; /* element of largest frequency */ + /* The sons of heap[n] are heap[2*n] and heap[2*n+1]. heap[0] is not used. + * The same heap array is used to build all trees. + */ + + uch depth[2*L_CODES+1]; + /* Depth of each subtree used as tie breaker for trees of equal frequency + */ + + uchf *l_buf; /* buffer for literals or lengths */ + + uInt lit_bufsize; + /* Size of match buffer for literals/lengths. There are 4 reasons for + * limiting lit_bufsize to 64K: + * - frequencies can be kept in 16 bit counters + * - if compression is not successful for the first block, all input + * data is still in the window so we can still emit a stored block even + * when input comes from standard input. (This can also be done for + * all blocks if lit_bufsize is not greater than 32K.) + * - if compression is not successful for a file smaller than 64K, we can + * even emit a stored file instead of a stored block (saving 5 bytes). + * This is applicable only for zip (not gzip or zlib). + * - creating new Huffman trees less frequently may not provide fast + * adaptation to changes in the input data statistics. (Take for + * example a binary file with poorly compressible code followed by + * a highly compressible string table.) Smaller buffer sizes give + * fast adaptation but have of course the overhead of transmitting + * trees more frequently. + * - I can't count above 4 + */ + + uInt last_lit; /* running index in l_buf */ + + ushf *d_buf; + /* Buffer for distances. To simplify the code, d_buf and l_buf have + * the same number of elements. To use different lengths, an extra flag + * array would be necessary. + */ + + ulg opt_len; /* bit length of current block with optimal trees */ + ulg static_len; /* bit length of current block with static trees */ + uInt matches; /* number of string matches in current block */ + int last_eob_len; /* bit length of EOB code for last block */ + +#ifdef DEBUG + ulg compressed_len; /* total bit length of compressed file mod 2^32 */ + ulg bits_sent; /* bit length of compressed data sent mod 2^32 */ +#endif + + ush bi_buf; + /* Output buffer. bits are inserted starting at the bottom (least + * significant bits). + */ + int bi_valid; + /* Number of valid bits in bi_buf. All bits above the last valid bit + * are always zero. + */ + +} FAR deflate_state; + +/* Output a byte on the stream. + * IN assertion: there is enough room in pending_buf. + */ +#define put_byte(s, c) {s->pending_buf[s->pending++] = (c);} + + +#define MIN_LOOKAHEAD (MAX_MATCH+MIN_MATCH+1) +/* Minimum amount of lookahead, except at the end of the input file. + * See deflate.c for comments about the MIN_MATCH+1. + */ + +#define MAX_DIST(s) ((s)->w_size-MIN_LOOKAHEAD) +/* In order to simplify the code, particularly on 16 bit machines, match + * distances are limited to MAX_DIST instead of WSIZE. + */ + + /* in trees.c */ +void _tr_init OF((deflate_state *s)); +int _tr_tally OF((deflate_state *s, unsigned dist, unsigned lc)); +void _tr_flush_block OF((deflate_state *s, charf *buf, ulg stored_len, + int eof)); +void _tr_align OF((deflate_state *s)); +void _tr_stored_block OF((deflate_state *s, charf *buf, ulg stored_len, + int eof)); + +#define d_code(dist) \ + ((dist) < 256 ? _dist_code[dist] : _dist_code[256+((dist)>>7)]) +/* Mapping from a distance to a distance code. dist is the distance - 1 and + * must not have side effects. _dist_code[256] and _dist_code[257] are never + * used. + */ + +#ifndef DEBUG +/* Inline versions of _tr_tally for speed: */ + +#if defined(GEN_TREES_H) || !defined(STDC) + extern uch _length_code[]; + extern uch _dist_code[]; +#else + extern const uch _length_code[]; + extern const uch _dist_code[]; +#endif + +# define _tr_tally_lit(s, c, flush) \ + { uch cc = (c); \ + s->d_buf[s->last_lit] = 0; \ + s->l_buf[s->last_lit++] = cc; \ + s->dyn_ltree[cc].Freq++; \ + flush = (s->last_lit == s->lit_bufsize-1); \ + } +# define _tr_tally_dist(s, distance, length, flush) \ + { uch len = (length); \ + ush dist = (distance); \ + s->d_buf[s->last_lit] = dist; \ + s->l_buf[s->last_lit++] = len; \ + dist--; \ + s->dyn_ltree[_length_code[len]+LITERALS+1].Freq++; \ + s->dyn_dtree[d_code(dist)].Freq++; \ + flush = (s->last_lit == s->lit_bufsize-1); \ + } +#else +# define _tr_tally_lit(s, c, flush) flush = _tr_tally(s, 0, c) +# define _tr_tally_dist(s, distance, length, flush) \ + flush = _tr_tally(s, distance, length) +#endif + +#endif diff --git a/Utilities/cmzlib/example.c b/Utilities/cmzlib/example.c new file mode 100644 index 0000000..5ffef92 --- /dev/null +++ b/Utilities/cmzlib/example.c @@ -0,0 +1,556 @@ +/* example.c -- usage example of the zlib compression library + * Copyright (C) 1995-2002 Jean-loup Gailly. + * For conditions of distribution and use, see copyright notice in zlib.h + */ + +/* @(#) $Id$ */ + +#include <stdio.h> +#include "zlib.h" + +#ifdef STDC +# include <string.h> +# include <stdlib.h> +#else + extern void exit OF((int)); +#endif + +#if defined(VMS) || defined(RISCOS) +# define TESTFILE "foo-gz" +#else +# define TESTFILE "foo.gz" +#endif + +#define CHECK_ERR(err, msg) { \ + if (err != Z_OK) { \ + fprintf(stderr, "%s error: %d\n", msg, err); \ + exit(1); \ + } \ +} + +const char hello[] = "hello, hello!"; +/* "hello world" would be more standard, but the repeated "hello" + * stresses the compression code better, sorry... + */ + +const char dictionary[] = "hello"; +uLong dictId; /* Adler32 value of the dictionary */ + +void test_compress OF((Byte *compr, uLong comprLen, + Byte *uncompr, uLong uncomprLen)); +void test_gzio OF((const char *out, const char *in, + Byte *uncompr, int uncomprLen)); +void test_deflate OF((Byte *compr, uLong comprLen)); +void test_inflate OF((Byte *compr, uLong comprLen, + Byte *uncompr, uLong uncomprLen)); +void test_large_deflate OF((Byte *compr, uLong comprLen, + Byte *uncompr, uLong uncomprLen)); +void test_large_inflate OF((Byte *compr, uLong comprLen, + Byte *uncompr, uLong uncomprLen)); +void test_flush OF((Byte *compr, uLong *comprLen)); +void test_sync OF((Byte *compr, uLong comprLen, + Byte *uncompr, uLong uncomprLen)); +void test_dict_deflate OF((Byte *compr, uLong comprLen)); +void test_dict_inflate OF((Byte *compr, uLong comprLen, + Byte *uncompr, uLong uncomprLen)); +int main OF((int argc, char *argv[])); + +/* =========================================================================== + * Test compress() and uncompress() + */ +void test_compress(compr, comprLen, uncompr, uncomprLen) + Byte *compr, *uncompr; + uLong comprLen, uncomprLen; +{ + int err; + uLong len = strlen(hello)+1; + + err = compress(compr, &comprLen, (const Bytef*)hello, len); + CHECK_ERR(err, "compress"); + + strcpy((char*)uncompr, "garbage"); + + err = uncompress(uncompr, &uncomprLen, compr, comprLen); + CHECK_ERR(err, "uncompress"); + + if (strcmp((char*)uncompr, hello)) { + fprintf(stderr, "bad uncompress\n"); + exit(1); + } else { + printf("uncompress(): %s\n", (char *)uncompr); + } +} + +/* =========================================================================== + * Test read/write of .gz files + */ +void test_gzio(out, in, uncompr, uncomprLen) + const char *out; /* compressed output file */ + const char *in; /* compressed input file */ + Byte *uncompr; + int uncomprLen; +{ + int err; + int len = strlen(hello)+1; + gzFile file; + z_off_t pos; + + file = gzopen(out, "wb"); + if (file == NULL) { + fprintf(stderr, "gzopen error\n"); + exit(1); + } + gzputc(file, 'h'); + if (gzputs(file, "ello") != 4) { + fprintf(stderr, "gzputs err: %s\n", gzerror(file, &err)); + exit(1); + } + if (gzprintf(file, ", %s!", "hello") != 8) { + fprintf(stderr, "gzprintf err: %s\n", gzerror(file, &err)); + exit(1); + } + gzseek(file, 1L, SEEK_CUR); /* add one zero byte */ + gzclose(file); + + file = gzopen(in, "rb"); + if (file == NULL) { + fprintf(stderr, "gzopen error\n"); + } + strcpy((char*)uncompr, "garbage"); + + uncomprLen = gzread(file, uncompr, (unsigned)uncomprLen); + if (uncomprLen != len) { + fprintf(stderr, "gzread err: %s\n", gzerror(file, &err)); + exit(1); + } + if (strcmp((char*)uncompr, hello)) { + fprintf(stderr, "bad gzread: %s\n", (char*)uncompr); + exit(1); + } else { + printf("gzread(): %s\n", (char *)uncompr); + } + + pos = gzseek(file, -8L, SEEK_CUR); + if (pos != 6 || gztell(file) != pos) { + fprintf(stderr, "gzseek error, pos=%ld, gztell=%ld\n", + (long)pos, (long)gztell(file)); + exit(1); + } + + if (gzgetc(file) != ' ') { + fprintf(stderr, "gzgetc error\n"); + exit(1); + } + + gzgets(file, (char*)uncompr, uncomprLen); + uncomprLen = strlen((char*)uncompr); + if (uncomprLen != 6) { /* "hello!" */ + fprintf(stderr, "gzgets err after gzseek: %s\n", gzerror(file, &err)); + exit(1); + } + if (strcmp((char*)uncompr, hello+7)) { + fprintf(stderr, "bad gzgets after gzseek\n"); + exit(1); + } else { + printf("gzgets() after gzseek: %s\n", (char *)uncompr); + } + + gzclose(file); +} + +/* =========================================================================== + * Test deflate() with small buffers + */ +void test_deflate(compr, comprLen) + Byte *compr; + uLong comprLen; +{ + z_stream c_stream; /* compression stream */ + int err; + int len = strlen(hello)+1; + + c_stream.zalloc = (alloc_func)0; + c_stream.zfree = (free_func)0; + c_stream.opaque = (voidpf)0; + + err = deflateInit(&c_stream, Z_DEFAULT_COMPRESSION); + CHECK_ERR(err, "deflateInit"); + + c_stream.next_in = (Bytef*)hello; + c_stream.next_out = compr; + + while (c_stream.total_in != (uLong)len && c_stream.total_out < comprLen) { + c_stream.avail_in = c_stream.avail_out = 1; /* force small buffers */ + err = deflate(&c_stream, Z_NO_FLUSH); + CHECK_ERR(err, "deflate"); + } + /* Finish the stream, still forcing small buffers: */ + for (;;) { + c_stream.avail_out = 1; + err = deflate(&c_stream, Z_FINISH); + if (err == Z_STREAM_END) break; + CHECK_ERR(err, "deflate"); + } + + err = deflateEnd(&c_stream); + CHECK_ERR(err, "deflateEnd"); +} + +/* =========================================================================== + * Test inflate() with small buffers + */ +void test_inflate(compr, comprLen, uncompr, uncomprLen) + Byte *compr, *uncompr; + uLong comprLen, uncomprLen; +{ + int err; + z_stream d_stream; /* decompression stream */ + + strcpy((char*)uncompr, "garbage"); + + d_stream.zalloc = (alloc_func)0; + d_stream.zfree = (free_func)0; + d_stream.opaque = (voidpf)0; + + d_stream.next_in = compr; + d_stream.avail_in = 0; + d_stream.next_out = uncompr; + + err = inflateInit(&d_stream); + CHECK_ERR(err, "inflateInit"); + + while (d_stream.total_out < uncomprLen && d_stream.total_in < comprLen) { + d_stream.avail_in = d_stream.avail_out = 1; /* force small buffers */ + err = inflate(&d_stream, Z_NO_FLUSH); + if (err == Z_STREAM_END) break; + CHECK_ERR(err, "inflate"); + } + + err = inflateEnd(&d_stream); + CHECK_ERR(err, "inflateEnd"); + + if (strcmp((char*)uncompr, hello)) { + fprintf(stderr, "bad inflate\n"); + exit(1); + } else { + printf("inflate(): %s\n", (char *)uncompr); + } +} + +/* =========================================================================== + * Test deflate() with large buffers and dynamic change of compression level + */ +void test_large_deflate(compr, comprLen, uncompr, uncomprLen) + Byte *compr, *uncompr; + uLong comprLen, uncomprLen; +{ + z_stream c_stream; /* compression stream */ + int err; + + c_stream.zalloc = (alloc_func)0; + c_stream.zfree = (free_func)0; + c_stream.opaque = (voidpf)0; + + err = deflateInit(&c_stream, Z_BEST_SPEED); + CHECK_ERR(err, "deflateInit"); + + c_stream.next_out = compr; + c_stream.avail_out = (uInt)comprLen; + + /* At this point, uncompr is still mostly zeroes, so it should compress + * very well: + */ + c_stream.next_in = uncompr; + c_stream.avail_in = (uInt)uncomprLen; + err = deflate(&c_stream, Z_NO_FLUSH); + CHECK_ERR(err, "deflate"); + if (c_stream.avail_in != 0) { + fprintf(stderr, "deflate not greedy\n"); + exit(1); + } + + /* Feed in already compressed data and switch to no compression: */ + deflateParams(&c_stream, Z_NO_COMPRESSION, Z_DEFAULT_STRATEGY); + c_stream.next_in = compr; + c_stream.avail_in = (uInt)comprLen/2; + err = deflate(&c_stream, Z_NO_FLUSH); + CHECK_ERR(err, "deflate"); + + /* Switch back to compressing mode: */ + deflateParams(&c_stream, Z_BEST_COMPRESSION, Z_FILTERED); + c_stream.next_in = uncompr; + c_stream.avail_in = (uInt)uncomprLen; + err = deflate(&c_stream, Z_NO_FLUSH); + CHECK_ERR(err, "deflate"); + + err = deflate(&c_stream, Z_FINISH); + if (err != Z_STREAM_END) { + fprintf(stderr, "deflate should report Z_STREAM_END\n"); + exit(1); + } + err = deflateEnd(&c_stream); + CHECK_ERR(err, "deflateEnd"); +} + +/* =========================================================================== + * Test inflate() with large buffers + */ +void test_large_inflate(compr, comprLen, uncompr, uncomprLen) + Byte *compr, *uncompr; + uLong comprLen, uncomprLen; +{ + int err; + z_stream d_stream; /* decompression stream */ + + strcpy((char*)uncompr, "garbage"); + + d_stream.zalloc = (alloc_func)0; + d_stream.zfree = (free_func)0; + d_stream.opaque = (voidpf)0; + + d_stream.next_in = compr; + d_stream.avail_in = (uInt)comprLen; + + err = inflateInit(&d_stream); + CHECK_ERR(err, "inflateInit"); + + for (;;) { + d_stream.next_out = uncompr; /* discard the output */ + d_stream.avail_out = (uInt)uncomprLen; + err = inflate(&d_stream, Z_NO_FLUSH); + if (err == Z_STREAM_END) break; + CHECK_ERR(err, "large inflate"); + } + + err = inflateEnd(&d_stream); + CHECK_ERR(err, "inflateEnd"); + + if (d_stream.total_out != 2*uncomprLen + comprLen/2) { + fprintf(stderr, "bad large inflate: %ld\n", d_stream.total_out); + exit(1); + } else { + printf("large_inflate(): OK\n"); + } +} + +/* =========================================================================== + * Test deflate() with full flush + */ +void test_flush(compr, comprLen) + Byte *compr; + uLong *comprLen; +{ + z_stream c_stream; /* compression stream */ + int err; + int len = strlen(hello)+1; + + c_stream.zalloc = (alloc_func)0; + c_stream.zfree = (free_func)0; + c_stream.opaque = (voidpf)0; + + err = deflateInit(&c_stream, Z_DEFAULT_COMPRESSION); + CHECK_ERR(err, "deflateInit"); + + c_stream.next_in = (Bytef*)hello; + c_stream.next_out = compr; + c_stream.avail_in = 3; + c_stream.avail_out = (uInt)*comprLen; + err = deflate(&c_stream, Z_FULL_FLUSH); + CHECK_ERR(err, "deflate"); + + compr[3]++; /* force an error in first compressed block */ + c_stream.avail_in = len - 3; + + err = deflate(&c_stream, Z_FINISH); + if (err != Z_STREAM_END) { + CHECK_ERR(err, "deflate"); + } + err = deflateEnd(&c_stream); + CHECK_ERR(err, "deflateEnd"); + + *comprLen = c_stream.total_out; +} + +/* =========================================================================== + * Test inflateSync() + */ +void test_sync(compr, comprLen, uncompr, uncomprLen) + Byte *compr, *uncompr; + uLong comprLen, uncomprLen; +{ + int err; + z_stream d_stream; /* decompression stream */ + + strcpy((char*)uncompr, "garbage"); + + d_stream.zalloc = (alloc_func)0; + d_stream.zfree = (free_func)0; + d_stream.opaque = (voidpf)0; + + d_stream.next_in = compr; + d_stream.avail_in = 2; /* just read the zlib header */ + + err = inflateInit(&d_stream); + CHECK_ERR(err, "inflateInit"); + + d_stream.next_out = uncompr; + d_stream.avail_out = (uInt)uncomprLen; + + inflate(&d_stream, Z_NO_FLUSH); + CHECK_ERR(err, "inflate"); + + d_stream.avail_in = (uInt)comprLen-2; /* read all compressed data */ + err = inflateSync(&d_stream); /* but skip the damaged part */ + CHECK_ERR(err, "inflateSync"); + + err = inflate(&d_stream, Z_FINISH); + if (err != Z_DATA_ERROR) { + fprintf(stderr, "inflate should report DATA_ERROR\n"); + /* Because of incorrect adler32 */ + exit(1); + } + err = inflateEnd(&d_stream); + CHECK_ERR(err, "inflateEnd"); + + printf("after inflateSync(): hel%s\n", (char *)uncompr); +} + +/* =========================================================================== + * Test deflate() with preset dictionary + */ +void test_dict_deflate(compr, comprLen) + Byte *compr; + uLong comprLen; +{ + z_stream c_stream; /* compression stream */ + int err; + + c_stream.zalloc = (alloc_func)0; + c_stream.zfree = (free_func)0; + c_stream.opaque = (voidpf)0; + + err = deflateInit(&c_stream, Z_BEST_COMPRESSION); + CHECK_ERR(err, "deflateInit"); + + err = deflateSetDictionary(&c_stream, + (const Bytef*)dictionary, sizeof(dictionary)); + CHECK_ERR(err, "deflateSetDictionary"); + + dictId = c_stream.adler; + c_stream.next_out = compr; + c_stream.avail_out = (uInt)comprLen; + + c_stream.next_in = (Bytef*)hello; + c_stream.avail_in = (uInt)strlen(hello)+1; + + err = deflate(&c_stream, Z_FINISH); + if (err != Z_STREAM_END) { + fprintf(stderr, "deflate should report Z_STREAM_END\n"); + exit(1); + } + err = deflateEnd(&c_stream); + CHECK_ERR(err, "deflateEnd"); +} + +/* =========================================================================== + * Test inflate() with a preset dictionary + */ +void test_dict_inflate(compr, comprLen, uncompr, uncomprLen) + Byte *compr, *uncompr; + uLong comprLen, uncomprLen; +{ + int err; + z_stream d_stream; /* decompression stream */ + + strcpy((char*)uncompr, "garbage"); + + d_stream.zalloc = (alloc_func)0; + d_stream.zfree = (free_func)0; + d_stream.opaque = (voidpf)0; + + d_stream.next_in = compr; + d_stream.avail_in = (uInt)comprLen; + + err = inflateInit(&d_stream); + CHECK_ERR(err, "inflateInit"); + + d_stream.next_out = uncompr; + d_stream.avail_out = (uInt)uncomprLen; + + for (;;) { + err = inflate(&d_stream, Z_NO_FLUSH); + if (err == Z_STREAM_END) break; + if (err == Z_NEED_DICT) { + if (d_stream.adler != dictId) { + fprintf(stderr, "unexpected dictionary"); + exit(1); + } + err = inflateSetDictionary(&d_stream, (const Bytef*)dictionary, + sizeof(dictionary)); + } + CHECK_ERR(err, "inflate with dict"); + } + + err = inflateEnd(&d_stream); + CHECK_ERR(err, "inflateEnd"); + + if (strcmp((char*)uncompr, hello)) { + fprintf(stderr, "bad inflate with dict\n"); + exit(1); + } else { + printf("inflate with dictionary: %s\n", (char *)uncompr); + } +} + +/* =========================================================================== + * Usage: example [output.gz [input.gz]] + */ + +int main(argc, argv) + int argc; + char *argv[]; +{ + Byte *compr, *uncompr; + uLong comprLen = 10000*sizeof(int); /* don't overflow on MSDOS */ + uLong uncomprLen = comprLen; + static const char* myVersion = ZLIB_VERSION; + + if (zlibVersion()[0] != myVersion[0]) { + fprintf(stderr, "incompatible zlib version\n"); + exit(1); + + } else if (strcmp(zlibVersion(), ZLIB_VERSION) != 0) { + fprintf(stderr, "warning: different zlib version\n"); + } + + compr = (Byte*)calloc((uInt)comprLen, 1); + uncompr = (Byte*)calloc((uInt)uncomprLen, 1); + /* compr and uncompr are cleared to avoid reading uninitialized + * data and to ensure that uncompr compresses well. + */ + if (compr == Z_NULL || uncompr == Z_NULL) { + printf("out of memory\n"); + exit(1); + } + test_compress(compr, comprLen, uncompr, uncomprLen); + + test_gzio((argc > 1 ? argv[1] : TESTFILE), + (argc > 2 ? argv[2] : TESTFILE), + uncompr, (int)uncomprLen); + + test_deflate(compr, comprLen); + test_inflate(compr, comprLen, uncompr, uncomprLen); + + test_large_deflate(compr, comprLen, uncompr, uncomprLen); + test_large_inflate(compr, comprLen, uncompr, uncomprLen); + + test_flush(compr, &comprLen); + test_sync(compr, comprLen, uncompr, uncomprLen); + comprLen = uncomprLen; + + test_dict_deflate(compr, comprLen); + test_dict_inflate(compr, comprLen, uncompr, uncomprLen); + + exit(0); + return 0; /* to avoid warning */ +} diff --git a/Utilities/cmzlib/gzio.c b/Utilities/cmzlib/gzio.c new file mode 100644 index 0000000..0b779c8 --- /dev/null +++ b/Utilities/cmzlib/gzio.c @@ -0,0 +1,875 @@ +/* gzio.c -- IO on .gz files + * Copyright (C) 1995-2002 Jean-loup Gailly. + * For conditions of distribution and use, see copyright notice in zlib.h + * + * Compile this file with -DNO_DEFLATE to avoid the compression code. + */ + +/* @(#) $Id$ */ + +#include <stdio.h> + +#include "zutil.h" + +struct internal_state {int dummy;}; /* for buggy compilers */ + +#ifndef Z_BUFSIZE +# ifdef MAXSEG_64K +# define Z_BUFSIZE 4096 /* minimize memory usage for 16-bit DOS */ +# else +# define Z_BUFSIZE 16384 +# endif +#endif +#ifndef Z_PRINTF_BUFSIZE +# define Z_PRINTF_BUFSIZE 4096 +#endif + +#define ALLOC(size) malloc(size) +#define TRYFREE(p) {if (p) free(p);} + +static int gz_magic[2] = {0x1f, 0x8b}; /* gzip magic header */ + +/* gzip flag byte */ +#define ASCII_FLAG 0x01 /* bit 0 set: file probably ascii text */ +#define HEAD_CRC 0x02 /* bit 1 set: header CRC present */ +#define EXTRA_FIELD 0x04 /* bit 2 set: extra field present */ +#define ORIG_NAME 0x08 /* bit 3 set: original file name present */ +#define COMMENT 0x10 /* bit 4 set: file comment present */ +#define RESERVED 0xE0 /* bits 5..7: reserved */ + +typedef struct gz_stream { + z_stream stream; + int z_err; /* error code for last stream operation */ + int z_eof; /* set if end of input file */ + FILE *file; /* .gz file */ + Byte *inbuf; /* input buffer */ + Byte *outbuf; /* output buffer */ + uLong crc; /* crc32 of uncompressed data */ + char *msg; /* error message */ + char *path; /* path name for debugging only */ + int transparent; /* 1 if input file is not a .gz file */ + char mode; /* 'w' or 'r' */ + long startpos; /* start of compressed data in file (header skipped) */ +} gz_stream; + + +local gzFile gz_open OF((const char *path, const char *mode, int fd)); +local int do_flush OF((gzFile file, int flush)); +local int get_byte OF((gz_stream *s)); +local void check_header OF((gz_stream *s)); +local int destroy OF((gz_stream *s)); +local void putLong OF((FILE *file, uLong x)); +local uLong getLong OF((gz_stream *s)); + +/* =========================================================================== + Opens a gzip (.gz) file for reading or writing. The mode parameter + is as in fopen ("rb" or "wb"). The file is given either by file descriptor + or path name (if fd == -1). + gz_open return NULL if the file could not be opened or if there was + insufficient memory to allocate the (de)compression state; errno + can be checked to distinguish the two cases (if errno is zero, the + zlib error is Z_MEM_ERROR). +*/ +local gzFile gz_open (path, mode, fd) + const char *path; + const char *mode; + int fd; +{ + int err; + int level = Z_DEFAULT_COMPRESSION; /* compression level */ + int strategy = Z_DEFAULT_STRATEGY; /* compression strategy */ + char *p = (char*)mode; + gz_stream *s; + char fmode[80]; /* copy of mode, without the compression level */ + char *m = fmode; + + if (!path || !mode) return Z_NULL; + + s = (gz_stream *)ALLOC(sizeof(gz_stream)); + if (!s) return Z_NULL; + + s->stream.zalloc = (alloc_func)0; + s->stream.zfree = (free_func)0; + s->stream.opaque = (voidpf)0; + s->stream.next_in = s->inbuf = Z_NULL; + s->stream.next_out = s->outbuf = Z_NULL; + s->stream.avail_in = s->stream.avail_out = 0; + s->file = NULL; + s->z_err = Z_OK; + s->z_eof = 0; + s->crc = crc32(0L, Z_NULL, 0); + s->msg = NULL; + s->transparent = 0; + + s->path = (char*)ALLOC(strlen(path)+1); + if (s->path == NULL) { + return destroy(s), (gzFile)Z_NULL; + } + strcpy(s->path, path); /* do this early for debugging */ + + s->mode = '\0'; + do { + if (*p == 'r') s->mode = 'r'; + if (*p == 'w' || *p == 'a') s->mode = 'w'; + if (*p >= '0' && *p <= '9') { + level = *p - '0'; + } else if (*p == 'f') { + strategy = Z_FILTERED; + } else if (*p == 'h') { + strategy = Z_HUFFMAN_ONLY; + } else { + *m++ = *p; /* copy the mode */ + } + } while (*p++ && m != fmode + sizeof(fmode)); + if (s->mode == '\0') return destroy(s), (gzFile)Z_NULL; + + if (s->mode == 'w') { +#ifdef NO_DEFLATE + err = Z_STREAM_ERROR; +#else + err = deflateInit2(&(s->stream), level, + Z_DEFLATED, -MAX_WBITS, DEF_MEM_LEVEL, strategy); + /* windowBits is passed < 0 to suppress zlib header */ + + s->stream.next_out = s->outbuf = (Byte*)ALLOC(Z_BUFSIZE); +#endif + if (err != Z_OK || s->outbuf == Z_NULL) { + return destroy(s), (gzFile)Z_NULL; + } + } else { + s->stream.next_in = s->inbuf = (Byte*)ALLOC(Z_BUFSIZE); + + err = inflateInit2(&(s->stream), -MAX_WBITS); + /* windowBits is passed < 0 to tell that there is no zlib header. + * Note that in this case inflate *requires* an extra "dummy" byte + * after the compressed stream in order to complete decompression and + * return Z_STREAM_END. Here the gzip CRC32 ensures that 4 bytes are + * present after the compressed stream. + */ + if (err != Z_OK || s->inbuf == Z_NULL) { + return destroy(s), (gzFile)Z_NULL; + } + } + s->stream.avail_out = Z_BUFSIZE; + + errno = 0; + s->file = fd < 0 ? F_OPEN(path, fmode) : (FILE*)fdopen(fd, fmode); + + if (s->file == NULL) { + return destroy(s), (gzFile)Z_NULL; + } + if (s->mode == 'w') { + /* Write a very simple .gz header: + */ + fprintf(s->file, "%c%c%c%c%c%c%c%c%c%c", gz_magic[0], gz_magic[1], + Z_DEFLATED, 0 /*flags*/, 0,0,0,0 /*time*/, 0 /*xflags*/, OS_CODE); + s->startpos = 10L; + /* We use 10L instead of ftell(s->file) to because ftell causes an + * fflush on some systems. This version of the library doesn't use + * startpos anyway in write mode, so this initialization is not + * necessary. + */ + } else { + check_header(s); /* skip the .gz header */ + s->startpos = (ftell(s->file) - s->stream.avail_in); + } + + return (gzFile)s; +} + +/* =========================================================================== + Opens a gzip (.gz) file for reading or writing. +*/ +gzFile ZEXPORT gzopen (path, mode) + const char *path; + const char *mode; +{ + return gz_open (path, mode, -1); +} + +/* =========================================================================== + Associate a gzFile with the file descriptor fd. fd is not dup'ed here + to mimic the behavio(u)r of fdopen. +*/ +gzFile ZEXPORT gzdopen (fd, mode) + int fd; + const char *mode; +{ + char name[20]; + + if (fd < 0) return (gzFile)Z_NULL; + sprintf(name, "<fd:%d>", fd); /* for debugging */ + + return gz_open (name, mode, fd); +} + +/* =========================================================================== + * Update the compression level and strategy + */ +int ZEXPORT gzsetparams (file, level, strategy) + gzFile file; + int level; + int strategy; +{ + gz_stream *s = (gz_stream*)file; + + if (s == NULL || s->mode != 'w') return Z_STREAM_ERROR; + + /* Make room to allow flushing */ + if (s->stream.avail_out == 0) { + + s->stream.next_out = s->outbuf; + if (fwrite(s->outbuf, 1, Z_BUFSIZE, s->file) != Z_BUFSIZE) { + s->z_err = Z_ERRNO; + } + s->stream.avail_out = Z_BUFSIZE; + } + + return deflateParams (&(s->stream), level, strategy); +} + +/* =========================================================================== + Read a byte from a gz_stream; update next_in and avail_in. Return EOF + for end of file. + IN assertion: the stream s has been sucessfully opened for reading. +*/ +local int get_byte(s) + gz_stream *s; +{ + if (s->z_eof) return EOF; + if (s->stream.avail_in == 0) { + errno = 0; + s->stream.avail_in = fread(s->inbuf, 1, Z_BUFSIZE, s->file); + if (s->stream.avail_in == 0) { + s->z_eof = 1; + if (ferror(s->file)) s->z_err = Z_ERRNO; + return EOF; + } + s->stream.next_in = s->inbuf; + } + s->stream.avail_in--; + return *(s->stream.next_in)++; +} + +/* =========================================================================== + Check the gzip header of a gz_stream opened for reading. Set the stream + mode to transparent if the gzip magic header is not present; set s->err + to Z_DATA_ERROR if the magic header is present but the rest of the header + is incorrect. + IN assertion: the stream s has already been created sucessfully; + s->stream.avail_in is zero for the first time, but may be non-zero + for concatenated .gz files. +*/ +local void check_header(s) + gz_stream *s; +{ + int method; /* method byte */ + int flags; /* flags byte */ + uInt len; + int c; + + /* Check the gzip magic header */ + for (len = 0; len < 2; len++) { + c = get_byte(s); + if (c != gz_magic[len]) { + if (len != 0) s->stream.avail_in++, s->stream.next_in--; + if (c != EOF) { + s->stream.avail_in++, s->stream.next_in--; + s->transparent = 1; + } + s->z_err = s->stream.avail_in != 0 ? Z_OK : Z_STREAM_END; + return; + } + } + method = get_byte(s); + flags = get_byte(s); + if (method != Z_DEFLATED || (flags & RESERVED) != 0) { + s->z_err = Z_DATA_ERROR; + return; + } + + /* Discard time, xflags and OS code: */ + for (len = 0; len < 6; len++) (void)get_byte(s); + + if ((flags & EXTRA_FIELD) != 0) { /* skip the extra field */ + len = (uInt)get_byte(s); + len += ((uInt)get_byte(s))<<8; + /* len is garbage if EOF but the loop below will quit anyway */ + while (len-- != 0 && get_byte(s) != EOF) ; + } + if ((flags & ORIG_NAME) != 0) { /* skip the original file name */ + while ((c = get_byte(s)) != 0 && c != EOF) ; + } + if ((flags & COMMENT) != 0) { /* skip the .gz file comment */ + while ((c = get_byte(s)) != 0 && c != EOF) ; + } + if ((flags & HEAD_CRC) != 0) { /* skip the header crc */ + for (len = 0; len < 2; len++) (void)get_byte(s); + } + s->z_err = s->z_eof ? Z_DATA_ERROR : Z_OK; +} + + /* =========================================================================== + * Cleanup then free the given gz_stream. Return a zlib error code. + Try freeing in the reverse order of allocations. + */ +local int destroy (s) + gz_stream *s; +{ + int err = Z_OK; + + if (!s) return Z_STREAM_ERROR; + + TRYFREE(s->msg); + + if (s->stream.state != NULL) { + if (s->mode == 'w') { +#ifdef NO_DEFLATE + err = Z_STREAM_ERROR; +#else + err = deflateEnd(&(s->stream)); +#endif + } else if (s->mode == 'r') { + err = inflateEnd(&(s->stream)); + } + } + if (s->file != NULL && fclose(s->file)) { +#ifdef ESPIPE + if (errno != ESPIPE) /* fclose is broken for pipes in HP/UX */ +#endif + err = Z_ERRNO; + } + if (s->z_err < 0) err = s->z_err; + + TRYFREE(s->inbuf); + TRYFREE(s->outbuf); + TRYFREE(s->path); + TRYFREE(s); + return err; +} + +/* =========================================================================== + Reads the given number of uncompressed bytes from the compressed file. + gzread returns the number of bytes actually read (0 for end of file). +*/ +int ZEXPORT gzread (file, buf, len) + gzFile file; + voidp buf; + unsigned len; +{ + gz_stream *s = (gz_stream*)file; + Bytef *start = (Bytef*)buf; /* starting point for crc computation */ + Byte *next_out; /* == stream.next_out but not forced far (for MSDOS) */ + + if (s == NULL || s->mode != 'r') return Z_STREAM_ERROR; + + if (s->z_err == Z_DATA_ERROR || s->z_err == Z_ERRNO) return -1; + if (s->z_err == Z_STREAM_END) return 0; /* EOF */ + + next_out = (Byte*)buf; + s->stream.next_out = (Bytef*)buf; + s->stream.avail_out = len; + + while (s->stream.avail_out != 0) { + + if (s->transparent) { + /* Copy first the lookahead bytes: */ + uInt n = s->stream.avail_in; + if (n > s->stream.avail_out) n = s->stream.avail_out; + if (n > 0) { + zmemcpy(s->stream.next_out, s->stream.next_in, n); + next_out += n; + s->stream.next_out = next_out; + s->stream.next_in += n; + s->stream.avail_out -= n; + s->stream.avail_in -= n; + } + if (s->stream.avail_out > 0) { + s->stream.avail_out -= fread(next_out, 1, s->stream.avail_out, + s->file); + } + len -= s->stream.avail_out; + s->stream.total_in += (uLong)len; + s->stream.total_out += (uLong)len; + if (len == 0) s->z_eof = 1; + return (int)len; + } + if (s->stream.avail_in == 0 && !s->z_eof) { + + errno = 0; + s->stream.avail_in = fread(s->inbuf, 1, Z_BUFSIZE, s->file); + if (s->stream.avail_in == 0) { + s->z_eof = 1; + if (ferror(s->file)) { + s->z_err = Z_ERRNO; + break; + } + } + s->stream.next_in = s->inbuf; + } + s->z_err = inflate(&(s->stream), Z_NO_FLUSH); + + if (s->z_err == Z_STREAM_END) { + /* Check CRC and original size */ + s->crc = crc32(s->crc, start, (uInt)(s->stream.next_out - start)); + start = s->stream.next_out; + + if (getLong(s) != s->crc) { + s->z_err = Z_DATA_ERROR; + } else { + (void)getLong(s); + /* The uncompressed length returned by above getlong() may + * be different from s->stream.total_out) in case of + * concatenated .gz files. Check for such files: + */ + check_header(s); + if (s->z_err == Z_OK) { + uLong total_in = s->stream.total_in; + uLong total_out = s->stream.total_out; + + inflateReset(&(s->stream)); + s->stream.total_in = total_in; + s->stream.total_out = total_out; + s->crc = crc32(0L, Z_NULL, 0); + } + } + } + if (s->z_err != Z_OK || s->z_eof) break; + } + s->crc = crc32(s->crc, start, (uInt)(s->stream.next_out - start)); + + return (int)(len - s->stream.avail_out); +} + + +/* =========================================================================== + Reads one byte from the compressed file. gzgetc returns this byte + or -1 in case of end of file or error. +*/ +int ZEXPORT gzgetc(file) + gzFile file; +{ + unsigned char c; + + return gzread(file, &c, 1) == 1 ? c : -1; +} + + +/* =========================================================================== + Reads bytes from the compressed file until len-1 characters are + read, or a newline character is read and transferred to buf, or an + end-of-file condition is encountered. The string is then terminated + with a null character. + gzgets returns buf, or Z_NULL in case of error. + + The current implementation is not optimized at all. +*/ +char * ZEXPORT gzgets(file, buf, len) + gzFile file; + char *buf; + int len; +{ + char *b = buf; + if (buf == Z_NULL || len <= 0) return Z_NULL; + + while (--len > 0 && gzread(file, buf, 1) == 1 && *buf++ != '\n') ; + *buf = '\0'; + return b == buf && len > 0 ? Z_NULL : b; +} + + +#ifndef NO_DEFLATE +/* =========================================================================== + Writes the given number of uncompressed bytes into the compressed file. + gzwrite returns the number of bytes actually written (0 in case of error). +*/ +int ZEXPORT gzwrite (file, buf, len) + gzFile file; + const voidp buf; + unsigned len; +{ + gz_stream *s = (gz_stream*)file; + + if (s == NULL || s->mode != 'w') return Z_STREAM_ERROR; + + s->stream.next_in = (Bytef*)buf; + s->stream.avail_in = len; + + while (s->stream.avail_in != 0) { + + if (s->stream.avail_out == 0) { + + s->stream.next_out = s->outbuf; + if (fwrite(s->outbuf, 1, Z_BUFSIZE, s->file) != Z_BUFSIZE) { + s->z_err = Z_ERRNO; + break; + } + s->stream.avail_out = Z_BUFSIZE; + } + s->z_err = deflate(&(s->stream), Z_NO_FLUSH); + if (s->z_err != Z_OK) break; + } + s->crc = crc32(s->crc, (const Bytef *)buf, len); + + return (int)(len - s->stream.avail_in); +} + +/* =========================================================================== + Converts, formats, and writes the args to the compressed file under + control of the format string, as in fprintf. gzprintf returns the number of + uncompressed bytes actually written (0 in case of error). +*/ +#ifdef STDC +#include <stdarg.h> + +int ZEXPORTVA gzprintf (gzFile file, const char *format, /* args */ ...) +{ + char buf[Z_PRINTF_BUFSIZE]; + va_list va; + int len; + + va_start(va, format); +#ifdef HAS_vsnprintf + (void)vsnprintf(buf, sizeof(buf), format, va); +#else + (void)vsprintf(buf, format, va); +#endif + va_end(va); + len = strlen(buf); /* some *sprintf don't return the nb of bytes written */ + if (len <= 0) return 0; + + return gzwrite(file, buf, (unsigned)len); +} +#else /* not ANSI C */ + +int ZEXPORTVA gzprintf (file, format, a1, a2, a3, a4, a5, a6, a7, a8, a9, a10, + a11, a12, a13, a14, a15, a16, a17, a18, a19, a20) + gzFile file; + const char *format; + int a1, a2, a3, a4, a5, a6, a7, a8, a9, a10, + a11, a12, a13, a14, a15, a16, a17, a18, a19, a20; +{ + char buf[Z_PRINTF_BUFSIZE]; + int len; + +#ifdef HAS_snprintf + snprintf(buf, sizeof(buf), format, a1, a2, a3, a4, a5, a6, a7, a8, + a9, a10, a11, a12, a13, a14, a15, a16, a17, a18, a19, a20); +#else + sprintf(buf, format, a1, a2, a3, a4, a5, a6, a7, a8, + a9, a10, a11, a12, a13, a14, a15, a16, a17, a18, a19, a20); +#endif + len = strlen(buf); /* old sprintf doesn't return the nb of bytes written */ + if (len <= 0) return 0; + + return gzwrite(file, buf, len); +} +#endif + +/* =========================================================================== + Writes c, converted to an unsigned char, into the compressed file. + gzputc returns the value that was written, or -1 in case of error. +*/ +int ZEXPORT gzputc(file, c) + gzFile file; + int c; +{ + unsigned char cc = (unsigned char) c; /* required for big endian systems */ + + return gzwrite(file, &cc, 1) == 1 ? (int)cc : -1; +} + + +/* =========================================================================== + Writes the given null-terminated string to the compressed file, excluding + the terminating null character. + gzputs returns the number of characters written, or -1 in case of error. +*/ +int ZEXPORT gzputs(file, s) + gzFile file; + const char *s; +{ + return gzwrite(file, (char*)s, (unsigned)strlen(s)); +} + + +/* =========================================================================== + Flushes all pending output into the compressed file. The parameter + flush is as in the deflate() function. +*/ +local int do_flush (file, flush) + gzFile file; + int flush; +{ + uInt len; + int done = 0; + gz_stream *s = (gz_stream*)file; + + if (s == NULL || s->mode != 'w') return Z_STREAM_ERROR; + + s->stream.avail_in = 0; /* should be zero already anyway */ + + for (;;) { + len = Z_BUFSIZE - s->stream.avail_out; + + if (len != 0) { + if ((uInt)fwrite(s->outbuf, 1, len, s->file) != len) { + s->z_err = Z_ERRNO; + return Z_ERRNO; + } + s->stream.next_out = s->outbuf; + s->stream.avail_out = Z_BUFSIZE; + } + if (done) break; + s->z_err = deflate(&(s->stream), flush); + + /* Ignore the second of two consecutive flushes: */ + if (len == 0 && s->z_err == Z_BUF_ERROR) s->z_err = Z_OK; + + /* deflate has finished flushing only when it hasn't used up + * all the available space in the output buffer: + */ + done = (s->stream.avail_out != 0 || s->z_err == Z_STREAM_END); + + if (s->z_err != Z_OK && s->z_err != Z_STREAM_END) break; + } + return s->z_err == Z_STREAM_END ? Z_OK : s->z_err; +} + +int ZEXPORT gzflush (file, flush) + gzFile file; + int flush; +{ + gz_stream *s = (gz_stream*)file; + int err = do_flush (file, flush); + + if (err) return err; + fflush(s->file); + return s->z_err == Z_STREAM_END ? Z_OK : s->z_err; +} +#endif /* NO_DEFLATE */ + +/* =========================================================================== + Sets the starting position for the next gzread or gzwrite on the given + compressed file. The offset represents a number of bytes in the + gzseek returns the resulting offset location as measured in bytes from + the beginning of the uncompressed stream, or -1 in case of error. + SEEK_END is not implemented, returns error. + In this version of the library, gzseek can be extremely slow. +*/ +z_off_t ZEXPORT gzseek (file, offset, whence) + gzFile file; + z_off_t offset; + int whence; +{ + gz_stream *s = (gz_stream*)file; + + if (s == NULL || whence == SEEK_END || + s->z_err == Z_ERRNO || s->z_err == Z_DATA_ERROR) { + return -1L; + } + + if (s->mode == 'w') { +#ifdef NO_DEFLATE + return -1L; +#else + if (whence == SEEK_SET) { + offset -= s->stream.total_in; + } + if (offset < 0) return -1L; + + /* At this point, offset is the number of zero bytes to write. */ + if (s->inbuf == Z_NULL) { + s->inbuf = (Byte*)ALLOC(Z_BUFSIZE); /* for seeking */ + zmemzero(s->inbuf, Z_BUFSIZE); + } + while (offset > 0) { + uInt size = Z_BUFSIZE; + if (offset < Z_BUFSIZE) size = (uInt)offset; + + size = gzwrite(file, s->inbuf, size); + if (size == 0) return -1L; + + offset -= size; + } + return (z_off_t)s->stream.total_in; +#endif + } + /* Rest of function is for reading only */ + + /* compute absolute position */ + if (whence == SEEK_CUR) { + offset += s->stream.total_out; + } + if (offset < 0) return -1L; + + if (s->transparent) { + /* map to fseek */ + s->stream.avail_in = 0; + s->stream.next_in = s->inbuf; + if (fseek(s->file, offset, SEEK_SET) < 0) return -1L; + + s->stream.total_in = s->stream.total_out = (uLong)offset; + return offset; + } + + /* For a negative seek, rewind and use positive seek */ + if ((uLong)offset >= s->stream.total_out) { + offset -= s->stream.total_out; + } else if (gzrewind(file) < 0) { + return -1L; + } + /* offset is now the number of bytes to skip. */ + + if (offset != 0 && s->outbuf == Z_NULL) { + s->outbuf = (Byte*)ALLOC(Z_BUFSIZE); + } + while (offset > 0) { + int size = Z_BUFSIZE; + if (offset < Z_BUFSIZE) size = (int)offset; + + size = gzread(file, s->outbuf, (uInt)size); + if (size <= 0) return -1L; + offset -= size; + } + return (z_off_t)s->stream.total_out; +} + +/* =========================================================================== + Rewinds input file. +*/ +int ZEXPORT gzrewind (file) + gzFile file; +{ + gz_stream *s = (gz_stream*)file; + + if (s == NULL || s->mode != 'r') return -1; + + s->z_err = Z_OK; + s->z_eof = 0; + s->stream.avail_in = 0; + s->stream.next_in = s->inbuf; + s->crc = crc32(0L, Z_NULL, 0); + + if (s->startpos == 0) { /* not a compressed file */ + rewind(s->file); + return 0; + } + + (void) inflateReset(&s->stream); + return fseek(s->file, s->startpos, SEEK_SET); +} + +/* =========================================================================== + Returns the starting position for the next gzread or gzwrite on the + given compressed file. This position represents a number of bytes in the + uncompressed data stream. +*/ +z_off_t ZEXPORT gztell (file) + gzFile file; +{ + return gzseek(file, 0L, SEEK_CUR); +} + +/* =========================================================================== + Returns 1 when EOF has previously been detected reading the given + input stream, otherwise zero. +*/ +int ZEXPORT gzeof (file) + gzFile file; +{ + gz_stream *s = (gz_stream*)file; + + return (s == NULL || s->mode != 'r') ? 0 : s->z_eof; +} + +/* =========================================================================== + Outputs a long in LSB order to the given file +*/ +local void putLong (file, x) + FILE *file; + uLong x; +{ + int n; + for (n = 0; n < 4; n++) { + fputc((int)(x & 0xff), file); + x >>= 8; + } +} + +/* =========================================================================== + Reads a long in LSB order from the given gz_stream. Sets z_err in case + of error. +*/ +local uLong getLong (s) + gz_stream *s; +{ + uLong x = (uLong)get_byte(s); + int c; + + x += ((uLong)get_byte(s))<<8; + x += ((uLong)get_byte(s))<<16; + c = get_byte(s); + if (c == EOF) s->z_err = Z_DATA_ERROR; + x += ((uLong)c)<<24; + return x; +} + +/* =========================================================================== + Flushes all pending output if necessary, closes the compressed file + and deallocates all the (de)compression state. +*/ +int ZEXPORT gzclose (file) + gzFile file; +{ + int err; + gz_stream *s = (gz_stream*)file; + + if (s == NULL) return Z_STREAM_ERROR; + + if (s->mode == 'w') { +#ifdef NO_DEFLATE + return Z_STREAM_ERROR; +#else + err = do_flush (file, Z_FINISH); + if (err != Z_OK) return destroy((gz_stream*)file); + + putLong (s->file, s->crc); + putLong (s->file, s->stream.total_in); +#endif + } + return destroy((gz_stream*)file); +} + +/* =========================================================================== + Returns the error message for the last error which occured on the + given compressed file. errnum is set to zlib error number. If an + error occured in the file system and not in the compression library, + errnum is set to Z_ERRNO and the application may consult errno + to get the exact error code. +*/ +const char* ZEXPORT gzerror (file, errnum) + gzFile file; + int *errnum; +{ + char *m; + gz_stream *s = (gz_stream*)file; + + if (s == NULL) { + *errnum = Z_STREAM_ERROR; + return (const char*)ERR_MSG(Z_STREAM_ERROR); + } + *errnum = s->z_err; + if (*errnum == Z_OK) return (const char*)""; + + m = (char*)(*errnum == Z_ERRNO ? zstrerror(errno) : s->stream.msg); + + if (m == NULL || *m == '\0') m = (char*)ERR_MSG(s->z_err); + + TRYFREE(s->msg); + s->msg = (char*)ALLOC(strlen(s->path) + strlen(m) + 3); + strcpy(s->msg, s->path); + strcat(s->msg, ": "); + strcat(s->msg, m); + return (const char*)s->msg; +} diff --git a/Utilities/cmzlib/infblock.c b/Utilities/cmzlib/infblock.c new file mode 100644 index 0000000..dd7a6d4 --- /dev/null +++ b/Utilities/cmzlib/infblock.c @@ -0,0 +1,403 @@ +/* infblock.c -- interpret and process block types to last block + * Copyright (C) 1995-2002 Mark Adler + * For conditions of distribution and use, see copyright notice in zlib.h + */ + +#include "zutil.h" +#include "infblock.h" +#include "inftrees.h" +#include "infcodes.h" +#include "infutil.h" + +struct inflate_codes_state {int dummy;}; /* for buggy compilers */ + +/* simplify the use of the inflate_huft type with some defines */ +#define exop word.what.Exop +#define bits word.what.Bits + +/* Table for deflate from PKZIP's appnote.txt. */ +local const uInt border[] = { /* Order of the bit length code lengths */ + 16, 17, 18, 0, 8, 7, 9, 6, 10, 5, 11, 4, 12, 3, 13, 2, 14, 1, 15}; + +/* + Notes beyond the 1.93a appnote.txt: + + 1. Distance pointers never point before the beginning of the output + stream. + 2. Distance pointers can point back across blocks, up to 32k away. + 3. There is an implied maximum of 7 bits for the bit length table and + 15 bits for the actual data. + 4. If only one code exists, then it is encoded using one bit. (Zero + would be more efficient, but perhaps a little confusing.) If two + codes exist, they are coded using one bit each (0 and 1). + 5. There is no way of sending zero distance codes--a dummy must be + sent if there are none. (History: a pre 2.0 version of PKZIP would + store blocks with no distance codes, but this was discovered to be + too harsh a criterion.) Valid only for 1.93a. 2.04c does allow + zero distance codes, which is sent as one code of zero bits in + length. + 6. There are up to 286 literal/length codes. Code 256 represents the + end-of-block. Note however that the static length tree defines + 288 codes just to fill out the Huffman codes. Codes 286 and 287 + cannot be used though, since there is no length base or extra bits + defined for them. Similarily, there are up to 30 distance codes. + However, static trees define 32 codes (all 5 bits) to fill out the + Huffman codes, but the last two had better not show up in the data. + 7. Unzip can check dynamic Huffman blocks for complete code sets. + The exception is that a single code would not be complete (see #4). + 8. The five bits following the block type is really the number of + literal codes sent minus 257. + 9. Length codes 8,16,16 are interpreted as 13 length codes of 8 bits + (1+6+6). Therefore, to output three times the length, you output + three codes (1+1+1), whereas to output four times the same length, + you only need two codes (1+3). Hmm. + 10. In the tree reconstruction algorithm, Code = Code + Increment + only if BitLength(i) is not zero. (Pretty obvious.) + 11. Correction: 4 Bits: # of Bit Length codes - 4 (4 - 19) + 12. Note: length code 284 can represent 227-258, but length code 285 + really is 258. The last length deserves its own, short code + since it gets used a lot in very redundant files. The length + 258 is special since 258 - 3 (the min match length) is 255. + 13. The literal/length and distance code bit lengths are read as a + single stream of lengths. It is possible (and advantageous) for + a repeat code (16, 17, or 18) to go across the boundary between + the two sets of lengths. + */ + + +void inflate_blocks_reset(s, z, c) +inflate_blocks_statef *s; +z_streamp z; +uLongf *c; +{ + if (c != Z_NULL) + *c = s->check; + if (s->mode == BTREE || s->mode == DTREE) + ZFREE(z, s->sub.trees.blens); + if (s->mode == CODES) + inflate_codes_free(s->sub.decode.codes, z); + s->mode = TYPE; + s->bitk = 0; + s->bitb = 0; + s->read = s->write = s->window; + if (s->checkfn != Z_NULL) + z->adler = s->check = (*s->checkfn)(0L, (const Bytef *)Z_NULL, 0); + Tracev((stderr, "inflate: blocks reset\n")); +} + + +inflate_blocks_statef *inflate_blocks_new(z, c, w) +z_streamp z; +check_func c; +uInt w; +{ + inflate_blocks_statef *s; + + if ((s = (inflate_blocks_statef *)ZALLOC + (z,1,sizeof(struct inflate_blocks_state))) == Z_NULL) + return s; + if ((s->hufts = + (inflate_huft *)ZALLOC(z, sizeof(inflate_huft), MANY)) == Z_NULL) + { + ZFREE(z, s); + return Z_NULL; + } + if ((s->window = (Bytef *)ZALLOC(z, 1, w)) == Z_NULL) + { + ZFREE(z, s->hufts); + ZFREE(z, s); + return Z_NULL; + } + s->end = s->window + w; + s->checkfn = c; + s->mode = TYPE; + Tracev((stderr, "inflate: blocks allocated\n")); + inflate_blocks_reset(s, z, Z_NULL); + return s; +} + + +int inflate_blocks(s, z, r) +inflate_blocks_statef *s; +z_streamp z; +int r; +{ + uInt t; /* temporary storage */ + uLong b; /* bit buffer */ + uInt k; /* bits in bit buffer */ + Bytef *p; /* input data pointer */ + uInt n; /* bytes available there */ + Bytef *q; /* output window write pointer */ + uInt m; /* bytes to end of window or read pointer */ + + /* copy input/output information to locals (UPDATE macro restores) */ + LOAD + + /* process input based on current state */ + while (1) switch (s->mode) + { + case TYPE: + NEEDBITS(3) + t = (uInt)b & 7; + s->last = t & 1; + switch (t >> 1) + { + case 0: /* stored */ + Tracev((stderr, "inflate: stored block%s\n", + s->last ? " (last)" : "")); + DUMPBITS(3) + t = k & 7; /* go to byte boundary */ + DUMPBITS(t) + s->mode = LENS; /* get length of stored block */ + break; + case 1: /* fixed */ + Tracev((stderr, "inflate: fixed codes block%s\n", + s->last ? " (last)" : "")); + { + uInt bl, bd; + inflate_huft *tl, *td; + + inflate_trees_fixed(&bl, &bd, &tl, &td, z); + s->sub.decode.codes = inflate_codes_new(bl, bd, tl, td, z); + if (s->sub.decode.codes == Z_NULL) + { + r = Z_MEM_ERROR; + LEAVE + } + } + DUMPBITS(3) + s->mode = CODES; + break; + case 2: /* dynamic */ + Tracev((stderr, "inflate: dynamic codes block%s\n", + s->last ? " (last)" : "")); + DUMPBITS(3) + s->mode = TABLE; + break; + case 3: /* illegal */ + DUMPBITS(3) + s->mode = BAD; + z->msg = (char*)"invalid block type"; + r = Z_DATA_ERROR; + LEAVE + } + break; + case LENS: + NEEDBITS(32) + if ((((~b) >> 16) & 0xffff) != (b & 0xffff)) + { + s->mode = BAD; + z->msg = (char*)"invalid stored block lengths"; + r = Z_DATA_ERROR; + LEAVE + } + s->sub.left = (uInt)b & 0xffff; + b = k = 0; /* dump bits */ + Tracev((stderr, "inflate: stored length %u\n", s->sub.left)); + s->mode = s->sub.left ? STORED : (s->last ? DRY : TYPE); + break; + case STORED: + if (n == 0) + LEAVE + NEEDOUT + t = s->sub.left; + if (t > n) t = n; + if (t > m) t = m; + zmemcpy(q, p, t); + p += t; n -= t; + q += t; m -= t; + if ((s->sub.left -= t) != 0) + break; + Tracev((stderr, "inflate: stored end, %lu total out\n", + z->total_out + (q >= s->read ? q - s->read : + (s->end - s->read) + (q - s->window)))); + s->mode = s->last ? DRY : TYPE; + break; + case TABLE: + NEEDBITS(14) + s->sub.trees.table = t = (uInt)b & 0x3fff; +#ifndef PKZIP_BUG_WORKAROUND + if ((t & 0x1f) > 29 || ((t >> 5) & 0x1f) > 29) + { + s->mode = BAD; + z->msg = (char*)"too many length or distance symbols"; + r = Z_DATA_ERROR; + LEAVE + } +#endif + t = 258 + (t & 0x1f) + ((t >> 5) & 0x1f); + if ((s->sub.trees.blens = (uIntf*)ZALLOC(z, t, sizeof(uInt))) == Z_NULL) + { + r = Z_MEM_ERROR; + LEAVE + } + DUMPBITS(14) + s->sub.trees.index = 0; + Tracev((stderr, "inflate: table sizes ok\n")); + s->mode = BTREE; + case BTREE: + while (s->sub.trees.index < 4 + (s->sub.trees.table >> 10)) + { + NEEDBITS(3) + s->sub.trees.blens[border[s->sub.trees.index++]] = (uInt)b & 7; + DUMPBITS(3) + } + while (s->sub.trees.index < 19) + s->sub.trees.blens[border[s->sub.trees.index++]] = 0; + s->sub.trees.bb = 7; + t = inflate_trees_bits(s->sub.trees.blens, &s->sub.trees.bb, + &s->sub.trees.tb, s->hufts, z); + if (t != Z_OK) + { + r = t; + if (r == Z_DATA_ERROR) + { + ZFREE(z, s->sub.trees.blens); + s->mode = BAD; + } + LEAVE + } + s->sub.trees.index = 0; + Tracev((stderr, "inflate: bits tree ok\n")); + s->mode = DTREE; + case DTREE: + while (t = s->sub.trees.table, + s->sub.trees.index < 258 + (t & 0x1f) + ((t >> 5) & 0x1f)) + { + inflate_huft *h; + uInt i, j, c; + + t = s->sub.trees.bb; + NEEDBITS(t) + h = s->sub.trees.tb + ((uInt)b & inflate_mask[t]); + t = h->bits; + c = h->base; + if (c < 16) + { + DUMPBITS(t) + s->sub.trees.blens[s->sub.trees.index++] = c; + } + else /* c == 16..18 */ + { + i = c == 18 ? 7 : c - 14; + j = c == 18 ? 11 : 3; + NEEDBITS(t + i) + DUMPBITS(t) + j += (uInt)b & inflate_mask[i]; + DUMPBITS(i) + i = s->sub.trees.index; + t = s->sub.trees.table; + if (i + j > 258 + (t & 0x1f) + ((t >> 5) & 0x1f) || + (c == 16 && i < 1)) + { + ZFREE(z, s->sub.trees.blens); + s->mode = BAD; + z->msg = (char*)"invalid bit length repeat"; + r = Z_DATA_ERROR; + LEAVE + } + c = c == 16 ? s->sub.trees.blens[i - 1] : 0; + do { + s->sub.trees.blens[i++] = c; + } while (--j); + s->sub.trees.index = i; + } + } + s->sub.trees.tb = Z_NULL; + { + uInt bl, bd; + inflate_huft *tl, *td; + inflate_codes_statef *c; + + bl = 9; /* must be <= 9 for lookahead assumptions */ + bd = 6; /* must be <= 9 for lookahead assumptions */ + t = s->sub.trees.table; + t = inflate_trees_dynamic(257 + (t & 0x1f), 1 + ((t >> 5) & 0x1f), + s->sub.trees.blens, &bl, &bd, &tl, &td, + s->hufts, z); + if (t != Z_OK) + { + if (t == (uInt)Z_DATA_ERROR) + { + ZFREE(z, s->sub.trees.blens); + s->mode = BAD; + } + r = t; + LEAVE + } + Tracev((stderr, "inflate: trees ok\n")); + if ((c = inflate_codes_new(bl, bd, tl, td, z)) == Z_NULL) + { + r = Z_MEM_ERROR; + LEAVE + } + s->sub.decode.codes = c; + } + ZFREE(z, s->sub.trees.blens); + s->mode = CODES; + case CODES: + UPDATE + if ((r = inflate_codes(s, z, r)) != Z_STREAM_END) + return inflate_flush(s, z, r); + r = Z_OK; + inflate_codes_free(s->sub.decode.codes, z); + LOAD + Tracev((stderr, "inflate: codes end, %lu total out\n", + z->total_out + (q >= s->read ? q - s->read : + (s->end - s->read) + (q - s->window)))); + if (!s->last) + { + s->mode = TYPE; + break; + } + s->mode = DRY; + case DRY: + FLUSH + if (s->read != s->write) + LEAVE + s->mode = DONE; + case DONE: + r = Z_STREAM_END; + LEAVE + case BAD: + r = Z_DATA_ERROR; + LEAVE + default: + r = Z_STREAM_ERROR; + LEAVE + } +} + + +int inflate_blocks_free(s, z) +inflate_blocks_statef *s; +z_streamp z; +{ + inflate_blocks_reset(s, z, Z_NULL); + ZFREE(z, s->window); + ZFREE(z, s->hufts); + ZFREE(z, s); + Tracev((stderr, "inflate: blocks freed\n")); + return Z_OK; +} + + +void inflate_set_dictionary(s, d, n) +inflate_blocks_statef *s; +const Bytef *d; +uInt n; +{ + zmemcpy(s->window, d, n); + s->read = s->write = s->window + n; +} + + +/* Returns true if inflate is currently at the end of a block generated + * by Z_SYNC_FLUSH or Z_FULL_FLUSH. + * IN assertion: s != Z_NULL + */ +int inflate_blocks_sync_point(s) +inflate_blocks_statef *s; +{ + return s->mode == LENS; +} diff --git a/Utilities/cmzlib/infblock.h b/Utilities/cmzlib/infblock.h new file mode 100644 index 0000000..173b226 --- /dev/null +++ b/Utilities/cmzlib/infblock.h @@ -0,0 +1,39 @@ +/* infblock.h -- header to use infblock.c + * Copyright (C) 1995-2002 Mark Adler + * For conditions of distribution and use, see copyright notice in zlib.h + */ + +/* WARNING: this file should *not* be used by applications. It is + part of the implementation of the compression library and is + subject to change. Applications should only use zlib.h. + */ + +struct inflate_blocks_state; +typedef struct inflate_blocks_state FAR inflate_blocks_statef; + +extern inflate_blocks_statef * inflate_blocks_new OF(( + z_streamp z, + check_func c, /* check function */ + uInt w)); /* window size */ + +extern int inflate_blocks OF(( + inflate_blocks_statef *, + z_streamp , + int)); /* initial return code */ + +extern void inflate_blocks_reset OF(( + inflate_blocks_statef *, + z_streamp , + uLongf *)); /* check value on output */ + +extern int inflate_blocks_free OF(( + inflate_blocks_statef *, + z_streamp)); + +extern void inflate_set_dictionary OF(( + inflate_blocks_statef *s, + const Bytef *d, /* dictionary */ + uInt n)); /* dictionary length */ + +extern int inflate_blocks_sync_point OF(( + inflate_blocks_statef *s)); diff --git a/Utilities/cmzlib/infcodes.c b/Utilities/cmzlib/infcodes.c new file mode 100644 index 0000000..9abe541 --- /dev/null +++ b/Utilities/cmzlib/infcodes.c @@ -0,0 +1,251 @@ +/* infcodes.c -- process literals and length/distance pairs + * Copyright (C) 1995-2002 Mark Adler + * For conditions of distribution and use, see copyright notice in zlib.h + */ + +#include "zutil.h" +#include "inftrees.h" +#include "infblock.h" +#include "infcodes.h" +#include "infutil.h" +#include "inffast.h" + +/* simplify the use of the inflate_huft type with some defines */ +#define exop word.what.Exop +#define bits word.what.Bits + +typedef enum { /* waiting for "i:"=input, "o:"=output, "x:"=nothing */ + START, /* x: set up for LEN */ + LEN, /* i: get length/literal/eob next */ + LENEXT, /* i: getting length extra (have base) */ + DIST, /* i: get distance next */ + DISTEXT, /* i: getting distance extra */ + COPY, /* o: copying bytes in window, waiting for space */ + LIT, /* o: got literal, waiting for output space */ + WASH, /* o: got eob, possibly still output waiting */ + END, /* x: got eob and all data flushed */ + BADCODE} /* x: got error */ +inflate_codes_mode; + +/* inflate codes private state */ +struct inflate_codes_state { + + /* mode */ + inflate_codes_mode mode; /* current inflate_codes mode */ + + /* mode dependent information */ + uInt len; + union { + struct { + inflate_huft *tree; /* pointer into tree */ + uInt need; /* bits needed */ + } code; /* if LEN or DIST, where in tree */ + uInt lit; /* if LIT, literal */ + struct { + uInt get; /* bits to get for extra */ + uInt dist; /* distance back to copy from */ + } copy; /* if EXT or COPY, where and how much */ + } sub; /* submode */ + + /* mode independent information */ + Byte lbits; /* ltree bits decoded per branch */ + Byte dbits; /* dtree bits decoder per branch */ + inflate_huft *ltree; /* literal/length/eob tree */ + inflate_huft *dtree; /* distance tree */ + +}; + + +inflate_codes_statef *inflate_codes_new(bl, bd, tl, td, z) +uInt bl, bd; +inflate_huft *tl; +inflate_huft *td; /* need separate declaration for Borland C++ */ +z_streamp z; +{ + inflate_codes_statef *c; + + if ((c = (inflate_codes_statef *) + ZALLOC(z,1,sizeof(struct inflate_codes_state))) != Z_NULL) + { + c->mode = START; + c->lbits = (Byte)bl; + c->dbits = (Byte)bd; + c->ltree = tl; + c->dtree = td; + Tracev((stderr, "inflate: codes new\n")); + } + return c; +} + + +int inflate_codes(s, z, r) +inflate_blocks_statef *s; +z_streamp z; +int r; +{ + uInt j; /* temporary storage */ + inflate_huft *t; /* temporary pointer */ + uInt e; /* extra bits or operation */ + uLong b; /* bit buffer */ + uInt k; /* bits in bit buffer */ + Bytef *p; /* input data pointer */ + uInt n; /* bytes available there */ + Bytef *q; /* output window write pointer */ + uInt m; /* bytes to end of window or read pointer */ + Bytef *f; /* pointer to copy strings from */ + inflate_codes_statef *c = s->sub.decode.codes; /* codes state */ + + /* copy input/output information to locals (UPDATE macro restores) */ + LOAD + + /* process input and output based on current state */ + while (1) switch (c->mode) + { /* waiting for "i:"=input, "o:"=output, "x:"=nothing */ + case START: /* x: set up for LEN */ +#ifndef SLOW + if (m >= 258 && n >= 10) + { + UPDATE + r = inflate_fast(c->lbits, c->dbits, c->ltree, c->dtree, s, z); + LOAD + if (r != Z_OK) + { + c->mode = r == Z_STREAM_END ? WASH : BADCODE; + break; + } + } +#endif /* !SLOW */ + c->sub.code.need = c->lbits; + c->sub.code.tree = c->ltree; + c->mode = LEN; + case LEN: /* i: get length/literal/eob next */ + j = c->sub.code.need; + NEEDBITS(j) + t = c->sub.code.tree + ((uInt)b & inflate_mask[j]); + DUMPBITS(t->bits) + e = (uInt)(t->exop); + if (e == 0) /* literal */ + { + c->sub.lit = t->base; + Tracevv((stderr, t->base >= 0x20 && t->base < 0x7f ? + "inflate: literal '%c'\n" : + "inflate: literal 0x%02x\n", t->base)); + c->mode = LIT; + break; + } + if (e & 16) /* length */ + { + c->sub.copy.get = e & 15; + c->len = t->base; + c->mode = LENEXT; + break; + } + if ((e & 64) == 0) /* next table */ + { + c->sub.code.need = e; + c->sub.code.tree = t + t->base; + break; + } + if (e & 32) /* end of block */ + { + Tracevv((stderr, "inflate: end of block\n")); + c->mode = WASH; + break; + } + c->mode = BADCODE; /* invalid code */ + z->msg = (char*)"invalid literal/length code"; + r = Z_DATA_ERROR; + LEAVE + case LENEXT: /* i: getting length extra (have base) */ + j = c->sub.copy.get; + NEEDBITS(j) + c->len += (uInt)b & inflate_mask[j]; + DUMPBITS(j) + c->sub.code.need = c->dbits; + c->sub.code.tree = c->dtree; + Tracevv((stderr, "inflate: length %u\n", c->len)); + c->mode = DIST; + case DIST: /* i: get distance next */ + j = c->sub.code.need; + NEEDBITS(j) + t = c->sub.code.tree + ((uInt)b & inflate_mask[j]); + DUMPBITS(t->bits) + e = (uInt)(t->exop); + if (e & 16) /* distance */ + { + c->sub.copy.get = e & 15; + c->sub.copy.dist = t->base; + c->mode = DISTEXT; + break; + } + if ((e & 64) == 0) /* next table */ + { + c->sub.code.need = e; + c->sub.code.tree = t + t->base; + break; + } + c->mode = BADCODE; /* invalid code */ + z->msg = (char*)"invalid distance code"; + r = Z_DATA_ERROR; + LEAVE + case DISTEXT: /* i: getting distance extra */ + j = c->sub.copy.get; + NEEDBITS(j) + c->sub.copy.dist += (uInt)b & inflate_mask[j]; + DUMPBITS(j) + Tracevv((stderr, "inflate: distance %u\n", c->sub.copy.dist)); + c->mode = COPY; + case COPY: /* o: copying bytes in window, waiting for space */ + f = q - c->sub.copy.dist; + while (f < s->window) /* modulo window size-"while" instead */ + f += s->end - s->window; /* of "if" handles invalid distances */ + while (c->len) + { + NEEDOUT + OUTBYTE(*f++) + if (f == s->end) + f = s->window; + c->len--; + } + c->mode = START; + break; + case LIT: /* o: got literal, waiting for output space */ + NEEDOUT + OUTBYTE(c->sub.lit) + c->mode = START; + break; + case WASH: /* o: got eob, possibly more output */ + if (k > 7) /* return unused byte, if any */ + { + Assert(k < 16, "inflate_codes grabbed too many bytes") + k -= 8; + n++; + p--; /* can always return one */ + } + FLUSH + if (s->read != s->write) + LEAVE + c->mode = END; + case END: + r = Z_STREAM_END; + LEAVE + case BADCODE: /* x: got error */ + r = Z_DATA_ERROR; + LEAVE + default: + r = Z_STREAM_ERROR; + LEAVE + } +#ifdef NEED_DUMMY_RETURN + return Z_STREAM_ERROR; /* Some dumb compilers complain without this */ +#endif +} + + +void inflate_codes_free(c, z) +inflate_codes_statef *c; +z_streamp z; +{ + ZFREE(z, c); + Tracev((stderr, "inflate: codes free\n")); +} diff --git a/Utilities/cmzlib/infcodes.h b/Utilities/cmzlib/infcodes.h new file mode 100644 index 0000000..46821a0 --- /dev/null +++ b/Utilities/cmzlib/infcodes.h @@ -0,0 +1,27 @@ +/* infcodes.h -- header to use infcodes.c + * Copyright (C) 1995-2002 Mark Adler + * For conditions of distribution and use, see copyright notice in zlib.h + */ + +/* WARNING: this file should *not* be used by applications. It is + part of the implementation of the compression library and is + subject to change. Applications should only use zlib.h. + */ + +struct inflate_codes_state; +typedef struct inflate_codes_state FAR inflate_codes_statef; + +extern inflate_codes_statef *inflate_codes_new OF(( + uInt, uInt, + inflate_huft *, inflate_huft *, + z_streamp )); + +extern int inflate_codes OF(( + inflate_blocks_statef *, + z_streamp , + int)); + +extern void inflate_codes_free OF(( + inflate_codes_statef *, + z_streamp )); + diff --git a/Utilities/cmzlib/inffast.c b/Utilities/cmzlib/inffast.c new file mode 100644 index 0000000..aa7f1d4 --- /dev/null +++ b/Utilities/cmzlib/inffast.c @@ -0,0 +1,183 @@ +/* inffast.c -- process literals and length/distance pairs fast + * Copyright (C) 1995-2002 Mark Adler + * For conditions of distribution and use, see copyright notice in zlib.h + */ + +#include "zutil.h" +#include "inftrees.h" +#include "infblock.h" +#include "infcodes.h" +#include "infutil.h" +#include "inffast.h" + +struct inflate_codes_state {int dummy;}; /* for buggy compilers */ + +/* simplify the use of the inflate_huft type with some defines */ +#define exop word.what.Exop +#define bits word.what.Bits + +/* macros for bit input with no checking and for returning unused bytes */ +#define GRABBITS(j) {while(k<(j)){b|=((uLong)NEXTBYTE)<<k;k+=8;}} +#define UNGRAB {c=z->avail_in-n;c=(k>>3)<c?k>>3:c;n+=c;p-=c;k-=c<<3;} + +/* Called with number of bytes left to write in window at least 258 + (the maximum string length) and number of input bytes available + at least ten. The ten bytes are six bytes for the longest length/ + distance pair plus four bytes for overloading the bit buffer. */ + +int inflate_fast(bl, bd, tl, td, s, z) +uInt bl, bd; +inflate_huft *tl; +inflate_huft *td; /* need separate declaration for Borland C++ */ +inflate_blocks_statef *s; +z_streamp z; +{ + inflate_huft *t; /* temporary pointer */ + uInt e; /* extra bits or operation */ + uLong b; /* bit buffer */ + uInt k; /* bits in bit buffer */ + Bytef *p; /* input data pointer */ + uInt n; /* bytes available there */ + Bytef *q; /* output window write pointer */ + uInt m; /* bytes to end of window or read pointer */ + uInt ml; /* mask for literal/length tree */ + uInt md; /* mask for distance tree */ + uInt c; /* bytes to copy */ + uInt d; /* distance back to copy from */ + Bytef *r; /* copy source pointer */ + + /* load input, output, bit values */ + LOAD + + /* initialize masks */ + ml = inflate_mask[bl]; + md = inflate_mask[bd]; + + /* do until not enough input or output space for fast loop */ + do { /* assume called with m >= 258 && n >= 10 */ + /* get literal/length code */ + GRABBITS(20) /* max bits for literal/length code */ + if ((e = (t = tl + ((uInt)b & ml))->exop) == 0) + { + DUMPBITS(t->bits) + Tracevv((stderr, t->base >= 0x20 && t->base < 0x7f ? + "inflate: * literal '%c'\n" : + "inflate: * literal 0x%02x\n", t->base)); + *q++ = (Byte)t->base; + m--; + continue; + } + do { + DUMPBITS(t->bits) + if (e & 16) + { + /* get extra bits for length */ + e &= 15; + c = t->base + ((uInt)b & inflate_mask[e]); + DUMPBITS(e) + Tracevv((stderr, "inflate: * length %u\n", c)); + + /* decode distance base of block to copy */ + GRABBITS(15); /* max bits for distance code */ + e = (t = td + ((uInt)b & md))->exop; + do { + DUMPBITS(t->bits) + if (e & 16) + { + /* get extra bits to add to distance base */ + e &= 15; + GRABBITS(e) /* get extra bits (up to 13) */ + d = t->base + ((uInt)b & inflate_mask[e]); + DUMPBITS(e) + Tracevv((stderr, "inflate: * distance %u\n", d)); + + /* do the copy */ + m -= c; + r = q - d; + if (r < s->window) /* wrap if needed */ + { + do { + r += s->end - s->window; /* force pointer in window */ + } while (r < s->window); /* covers invalid distances */ + e = s->end - r; + if (c > e) + { + c -= e; /* wrapped copy */ + do { + *q++ = *r++; + } while (--e); + r = s->window; + do { + *q++ = *r++; + } while (--c); + } + else /* normal copy */ + { + *q++ = *r++; c--; + *q++ = *r++; c--; + do { + *q++ = *r++; + } while (--c); + } + } + else /* normal copy */ + { + *q++ = *r++; c--; + *q++ = *r++; c--; + do { + *q++ = *r++; + } while (--c); + } + break; + } + else if ((e & 64) == 0) + { + t += t->base; + e = (t += ((uInt)b & inflate_mask[e]))->exop; + } + else + { + z->msg = (char*)"invalid distance code"; + UNGRAB + UPDATE + return Z_DATA_ERROR; + } + } while (1); + break; + } + if ((e & 64) == 0) + { + t += t->base; + if ((e = (t += ((uInt)b & inflate_mask[e]))->exop) == 0) + { + DUMPBITS(t->bits) + Tracevv((stderr, t->base >= 0x20 && t->base < 0x7f ? + "inflate: * literal '%c'\n" : + "inflate: * literal 0x%02x\n", t->base)); + *q++ = (Byte)t->base; + m--; + break; + } + } + else if (e & 32) + { + Tracevv((stderr, "inflate: * end of block\n")); + UNGRAB + UPDATE + return Z_STREAM_END; + } + else + { + z->msg = (char*)"invalid literal/length code"; + UNGRAB + UPDATE + return Z_DATA_ERROR; + } + } while (1); + } while (m >= 258 && n >= 10); + + /* not enough input or output--restore pointers and return */ + UNGRAB + UPDATE + return Z_OK; +} diff --git a/Utilities/cmzlib/inffast.h b/Utilities/cmzlib/inffast.h new file mode 100644 index 0000000..a31a4bb --- /dev/null +++ b/Utilities/cmzlib/inffast.h @@ -0,0 +1,17 @@ +/* inffast.h -- header to use inffast.c + * Copyright (C) 1995-2002 Mark Adler + * For conditions of distribution and use, see copyright notice in zlib.h + */ + +/* WARNING: this file should *not* be used by applications. It is + part of the implementation of the compression library and is + subject to change. Applications should only use zlib.h. + */ + +extern int inflate_fast OF(( + uInt, + uInt, + inflate_huft *, + inflate_huft *, + inflate_blocks_statef *, + z_streamp )); diff --git a/Utilities/cmzlib/inffixed.h b/Utilities/cmzlib/inffixed.h new file mode 100644 index 0000000..77f7e76 --- /dev/null +++ b/Utilities/cmzlib/inffixed.h @@ -0,0 +1,151 @@ +/* inffixed.h -- table for decoding fixed codes + * Generated automatically by the maketree.c program + */ + +/* WARNING: this file should *not* be used by applications. It is + part of the implementation of the compression library and is + subject to change. Applications should only use zlib.h. + */ + +local uInt fixed_bl = 9; +local uInt fixed_bd = 5; +local inflate_huft fixed_tl[] = { + {{{96,7}},256}, {{{0,8}},80}, {{{0,8}},16}, {{{84,8}},115}, + {{{82,7}},31}, {{{0,8}},112}, {{{0,8}},48}, {{{0,9}},192}, + {{{80,7}},10}, {{{0,8}},96}, {{{0,8}},32}, {{{0,9}},160}, + {{{0,8}},0}, {{{0,8}},128}, {{{0,8}},64}, {{{0,9}},224}, + {{{80,7}},6}, {{{0,8}},88}, {{{0,8}},24}, {{{0,9}},144}, + {{{83,7}},59}, {{{0,8}},120}, {{{0,8}},56}, {{{0,9}},208}, + {{{81,7}},17}, {{{0,8}},104}, {{{0,8}},40}, {{{0,9}},176}, + {{{0,8}},8}, {{{0,8}},136}, {{{0,8}},72}, {{{0,9}},240}, + {{{80,7}},4}, {{{0,8}},84}, {{{0,8}},20}, {{{85,8}},227}, + {{{83,7}},43}, {{{0,8}},116}, {{{0,8}},52}, {{{0,9}},200}, + {{{81,7}},13}, {{{0,8}},100}, {{{0,8}},36}, {{{0,9}},168}, + {{{0,8}},4}, {{{0,8}},132}, {{{0,8}},68}, {{{0,9}},232}, + {{{80,7}},8}, {{{0,8}},92}, {{{0,8}},28}, {{{0,9}},152}, + {{{84,7}},83}, {{{0,8}},124}, {{{0,8}},60}, {{{0,9}},216}, + {{{82,7}},23}, {{{0,8}},108}, {{{0,8}},44}, {{{0,9}},184}, + {{{0,8}},12}, {{{0,8}},140}, {{{0,8}},76}, {{{0,9}},248}, + {{{80,7}},3}, {{{0,8}},82}, {{{0,8}},18}, {{{85,8}},163}, + {{{83,7}},35}, {{{0,8}},114}, {{{0,8}},50}, {{{0,9}},196}, + {{{81,7}},11}, {{{0,8}},98}, {{{0,8}},34}, {{{0,9}},164}, + {{{0,8}},2}, {{{0,8}},130}, {{{0,8}},66}, {{{0,9}},228}, + {{{80,7}},7}, {{{0,8}},90}, {{{0,8}},26}, {{{0,9}},148}, + {{{84,7}},67}, {{{0,8}},122}, {{{0,8}},58}, {{{0,9}},212}, + {{{82,7}},19}, {{{0,8}},106}, {{{0,8}},42}, {{{0,9}},180}, + {{{0,8}},10}, {{{0,8}},138}, {{{0,8}},74}, {{{0,9}},244}, + {{{80,7}},5}, {{{0,8}},86}, {{{0,8}},22}, {{{192,8}},0}, + {{{83,7}},51}, {{{0,8}},118}, {{{0,8}},54}, {{{0,9}},204}, + {{{81,7}},15}, {{{0,8}},102}, {{{0,8}},38}, {{{0,9}},172}, + {{{0,8}},6}, {{{0,8}},134}, {{{0,8}},70}, {{{0,9}},236}, + {{{80,7}},9}, {{{0,8}},94}, {{{0,8}},30}, {{{0,9}},156}, + {{{84,7}},99}, {{{0,8}},126}, {{{0,8}},62}, {{{0,9}},220}, + {{{82,7}},27}, {{{0,8}},110}, {{{0,8}},46}, {{{0,9}},188}, + {{{0,8}},14}, {{{0,8}},142}, {{{0,8}},78}, {{{0,9}},252}, + {{{96,7}},256}, {{{0,8}},81}, {{{0,8}},17}, {{{85,8}},131}, + {{{82,7}},31}, {{{0,8}},113}, {{{0,8}},49}, {{{0,9}},194}, + {{{80,7}},10}, {{{0,8}},97}, {{{0,8}},33}, {{{0,9}},162}, + {{{0,8}},1}, {{{0,8}},129}, {{{0,8}},65}, {{{0,9}},226}, + {{{80,7}},6}, {{{0,8}},89}, {{{0,8}},25}, {{{0,9}},146}, + {{{83,7}},59}, {{{0,8}},121}, {{{0,8}},57}, {{{0,9}},210}, + {{{81,7}},17}, {{{0,8}},105}, {{{0,8}},41}, {{{0,9}},178}, + {{{0,8}},9}, {{{0,8}},137}, {{{0,8}},73}, {{{0,9}},242}, + {{{80,7}},4}, {{{0,8}},85}, {{{0,8}},21}, {{{80,8}},258}, + {{{83,7}},43}, {{{0,8}},117}, {{{0,8}},53}, {{{0,9}},202}, + {{{81,7}},13}, {{{0,8}},101}, {{{0,8}},37}, {{{0,9}},170}, + {{{0,8}},5}, {{{0,8}},133}, {{{0,8}},69}, {{{0,9}},234}, + {{{80,7}},8}, {{{0,8}},93}, {{{0,8}},29}, {{{0,9}},154}, + {{{84,7}},83}, {{{0,8}},125}, {{{0,8}},61}, {{{0,9}},218}, + {{{82,7}},23}, {{{0,8}},109}, {{{0,8}},45}, {{{0,9}},186}, + {{{0,8}},13}, {{{0,8}},141}, {{{0,8}},77}, {{{0,9}},250}, + {{{80,7}},3}, {{{0,8}},83}, {{{0,8}},19}, {{{85,8}},195}, + {{{83,7}},35}, {{{0,8}},115}, {{{0,8}},51}, {{{0,9}},198}, + {{{81,7}},11}, {{{0,8}},99}, {{{0,8}},35}, {{{0,9}},166}, + {{{0,8}},3}, {{{0,8}},131}, {{{0,8}},67}, {{{0,9}},230}, + {{{80,7}},7}, {{{0,8}},91}, {{{0,8}},27}, {{{0,9}},150}, + {{{84,7}},67}, {{{0,8}},123}, {{{0,8}},59}, {{{0,9}},214}, + {{{82,7}},19}, {{{0,8}},107}, {{{0,8}},43}, {{{0,9}},182}, + {{{0,8}},11}, {{{0,8}},139}, {{{0,8}},75}, {{{0,9}},246}, + {{{80,7}},5}, {{{0,8}},87}, {{{0,8}},23}, {{{192,8}},0}, + {{{83,7}},51}, {{{0,8}},119}, {{{0,8}},55}, {{{0,9}},206}, + {{{81,7}},15}, {{{0,8}},103}, {{{0,8}},39}, {{{0,9}},174}, + {{{0,8}},7}, {{{0,8}},135}, {{{0,8}},71}, {{{0,9}},238}, + {{{80,7}},9}, {{{0,8}},95}, {{{0,8}},31}, {{{0,9}},158}, + {{{84,7}},99}, {{{0,8}},127}, {{{0,8}},63}, {{{0,9}},222}, + {{{82,7}},27}, {{{0,8}},111}, {{{0,8}},47}, {{{0,9}},190}, + {{{0,8}},15}, {{{0,8}},143}, {{{0,8}},79}, {{{0,9}},254}, + {{{96,7}},256}, {{{0,8}},80}, {{{0,8}},16}, {{{84,8}},115}, + {{{82,7}},31}, {{{0,8}},112}, {{{0,8}},48}, {{{0,9}},193}, + {{{80,7}},10}, {{{0,8}},96}, {{{0,8}},32}, {{{0,9}},161}, + {{{0,8}},0}, {{{0,8}},128}, {{{0,8}},64}, {{{0,9}},225}, + {{{80,7}},6}, {{{0,8}},88}, {{{0,8}},24}, {{{0,9}},145}, + {{{83,7}},59}, {{{0,8}},120}, {{{0,8}},56}, {{{0,9}},209}, + {{{81,7}},17}, {{{0,8}},104}, {{{0,8}},40}, {{{0,9}},177}, + {{{0,8}},8}, {{{0,8}},136}, {{{0,8}},72}, {{{0,9}},241}, + {{{80,7}},4}, {{{0,8}},84}, {{{0,8}},20}, {{{85,8}},227}, + {{{83,7}},43}, {{{0,8}},116}, {{{0,8}},52}, {{{0,9}},201}, + {{{81,7}},13}, {{{0,8}},100}, {{{0,8}},36}, {{{0,9}},169}, + {{{0,8}},4}, {{{0,8}},132}, {{{0,8}},68}, {{{0,9}},233}, + {{{80,7}},8}, {{{0,8}},92}, {{{0,8}},28}, {{{0,9}},153}, + {{{84,7}},83}, {{{0,8}},124}, {{{0,8}},60}, {{{0,9}},217}, + {{{82,7}},23}, {{{0,8}},108}, {{{0,8}},44}, {{{0,9}},185}, + {{{0,8}},12}, {{{0,8}},140}, {{{0,8}},76}, {{{0,9}},249}, + {{{80,7}},3}, {{{0,8}},82}, {{{0,8}},18}, {{{85,8}},163}, + {{{83,7}},35}, {{{0,8}},114}, {{{0,8}},50}, {{{0,9}},197}, + {{{81,7}},11}, {{{0,8}},98}, {{{0,8}},34}, {{{0,9}},165}, + {{{0,8}},2}, {{{0,8}},130}, {{{0,8}},66}, {{{0,9}},229}, + {{{80,7}},7}, {{{0,8}},90}, {{{0,8}},26}, {{{0,9}},149}, + {{{84,7}},67}, {{{0,8}},122}, {{{0,8}},58}, {{{0,9}},213}, + {{{82,7}},19}, {{{0,8}},106}, {{{0,8}},42}, {{{0,9}},181}, + {{{0,8}},10}, {{{0,8}},138}, {{{0,8}},74}, {{{0,9}},245}, + {{{80,7}},5}, {{{0,8}},86}, {{{0,8}},22}, {{{192,8}},0}, + {{{83,7}},51}, {{{0,8}},118}, {{{0,8}},54}, {{{0,9}},205}, + {{{81,7}},15}, {{{0,8}},102}, {{{0,8}},38}, {{{0,9}},173}, + {{{0,8}},6}, {{{0,8}},134}, {{{0,8}},70}, {{{0,9}},237}, + {{{80,7}},9}, {{{0,8}},94}, {{{0,8}},30}, {{{0,9}},157}, + {{{84,7}},99}, {{{0,8}},126}, {{{0,8}},62}, {{{0,9}},221}, + {{{82,7}},27}, {{{0,8}},110}, {{{0,8}},46}, {{{0,9}},189}, + {{{0,8}},14}, {{{0,8}},142}, {{{0,8}},78}, {{{0,9}},253}, + {{{96,7}},256}, {{{0,8}},81}, {{{0,8}},17}, {{{85,8}},131}, + {{{82,7}},31}, {{{0,8}},113}, {{{0,8}},49}, {{{0,9}},195}, + {{{80,7}},10}, {{{0,8}},97}, {{{0,8}},33}, {{{0,9}},163}, + {{{0,8}},1}, {{{0,8}},129}, {{{0,8}},65}, {{{0,9}},227}, + {{{80,7}},6}, {{{0,8}},89}, {{{0,8}},25}, {{{0,9}},147}, + {{{83,7}},59}, {{{0,8}},121}, {{{0,8}},57}, {{{0,9}},211}, + {{{81,7}},17}, {{{0,8}},105}, {{{0,8}},41}, {{{0,9}},179}, + {{{0,8}},9}, {{{0,8}},137}, {{{0,8}},73}, {{{0,9}},243}, + {{{80,7}},4}, {{{0,8}},85}, {{{0,8}},21}, {{{80,8}},258}, + {{{83,7}},43}, {{{0,8}},117}, {{{0,8}},53}, {{{0,9}},203}, + {{{81,7}},13}, {{{0,8}},101}, {{{0,8}},37}, {{{0,9}},171}, + {{{0,8}},5}, {{{0,8}},133}, {{{0,8}},69}, {{{0,9}},235}, + {{{80,7}},8}, {{{0,8}},93}, {{{0,8}},29}, {{{0,9}},155}, + {{{84,7}},83}, {{{0,8}},125}, {{{0,8}},61}, {{{0,9}},219}, + {{{82,7}},23}, {{{0,8}},109}, {{{0,8}},45}, {{{0,9}},187}, + {{{0,8}},13}, {{{0,8}},141}, {{{0,8}},77}, {{{0,9}},251}, + {{{80,7}},3}, {{{0,8}},83}, {{{0,8}},19}, {{{85,8}},195}, + {{{83,7}},35}, {{{0,8}},115}, {{{0,8}},51}, {{{0,9}},199}, + {{{81,7}},11}, {{{0,8}},99}, {{{0,8}},35}, {{{0,9}},167}, + {{{0,8}},3}, {{{0,8}},131}, {{{0,8}},67}, {{{0,9}},231}, + {{{80,7}},7}, {{{0,8}},91}, {{{0,8}},27}, {{{0,9}},151}, + {{{84,7}},67}, {{{0,8}},123}, {{{0,8}},59}, {{{0,9}},215}, + {{{82,7}},19}, {{{0,8}},107}, {{{0,8}},43}, {{{0,9}},183}, + {{{0,8}},11}, {{{0,8}},139}, {{{0,8}},75}, {{{0,9}},247}, + {{{80,7}},5}, {{{0,8}},87}, {{{0,8}},23}, {{{192,8}},0}, + {{{83,7}},51}, {{{0,8}},119}, {{{0,8}},55}, {{{0,9}},207}, + {{{81,7}},15}, {{{0,8}},103}, {{{0,8}},39}, {{{0,9}},175}, + {{{0,8}},7}, {{{0,8}},135}, {{{0,8}},71}, {{{0,9}},239}, + {{{80,7}},9}, {{{0,8}},95}, {{{0,8}},31}, {{{0,9}},159}, + {{{84,7}},99}, {{{0,8}},127}, {{{0,8}},63}, {{{0,9}},223}, + {{{82,7}},27}, {{{0,8}},111}, {{{0,8}},47}, {{{0,9}},191}, + {{{0,8}},15}, {{{0,8}},143}, {{{0,8}},79}, {{{0,9}},255} + }; +local inflate_huft fixed_td[] = { + {{{80,5}},1}, {{{87,5}},257}, {{{83,5}},17}, {{{91,5}},4097}, + {{{81,5}},5}, {{{89,5}},1025}, {{{85,5}},65}, {{{93,5}},16385}, + {{{80,5}},3}, {{{88,5}},513}, {{{84,5}},33}, {{{92,5}},8193}, + {{{82,5}},9}, {{{90,5}},2049}, {{{86,5}},129}, {{{192,5}},24577}, + {{{80,5}},2}, {{{87,5}},385}, {{{83,5}},25}, {{{91,5}},6145}, + {{{81,5}},7}, {{{89,5}},1537}, {{{85,5}},97}, {{{93,5}},24577}, + {{{80,5}},4}, {{{88,5}},769}, {{{84,5}},49}, {{{92,5}},12289}, + {{{82,5}},13}, {{{90,5}},3073}, {{{86,5}},193}, {{{192,5}},24577} + }; diff --git a/Utilities/cmzlib/inflate.c b/Utilities/cmzlib/inflate.c new file mode 100644 index 0000000..dfb2e86 --- /dev/null +++ b/Utilities/cmzlib/inflate.c @@ -0,0 +1,366 @@ +/* inflate.c -- zlib interface to inflate modules + * Copyright (C) 1995-2002 Mark Adler + * For conditions of distribution and use, see copyright notice in zlib.h + */ + +#include "zutil.h" +#include "infblock.h" + +struct inflate_blocks_state {int dummy;}; /* for buggy compilers */ + +typedef enum { + METHOD, /* waiting for method byte */ + FLAG, /* waiting for flag byte */ + DICT4, /* four dictionary check bytes to go */ + DICT3, /* three dictionary check bytes to go */ + DICT2, /* two dictionary check bytes to go */ + DICT1, /* one dictionary check byte to go */ + DICT0, /* waiting for inflateSetDictionary */ + BLOCKS, /* decompressing blocks */ + CHECK4, /* four check bytes to go */ + CHECK3, /* three check bytes to go */ + CHECK2, /* two check bytes to go */ + CHECK1, /* one check byte to go */ + DONE, /* finished check, done */ + BAD} /* got an error--stay here */ +inflate_mode; + +/* inflate private state */ +struct internal_state { + + /* mode */ + inflate_mode mode; /* current inflate mode */ + + /* mode dependent information */ + union { + uInt method; /* if FLAGS, method byte */ + struct { + uLong was; /* computed check value */ + uLong need; /* stream check value */ + } check; /* if CHECK, check values to compare */ + uInt marker; /* if BAD, inflateSync's marker bytes count */ + } sub; /* submode */ + + /* mode independent information */ + int nowrap; /* flag for no wrapper */ + uInt wbits; /* log2(window size) (8..15, defaults to 15) */ + inflate_blocks_statef + *blocks; /* current inflate_blocks state */ + +}; + + +int ZEXPORT inflateReset(z) +z_streamp z; +{ + if (z == Z_NULL || z->state == Z_NULL) + return Z_STREAM_ERROR; + z->total_in = z->total_out = 0; + z->msg = Z_NULL; + z->state->mode = z->state->nowrap ? BLOCKS : METHOD; + inflate_blocks_reset(z->state->blocks, z, Z_NULL); + Tracev((stderr, "inflate: reset\n")); + return Z_OK; +} + + +int ZEXPORT inflateEnd(z) +z_streamp z; +{ + if (z == Z_NULL || z->state == Z_NULL || z->zfree == Z_NULL) + return Z_STREAM_ERROR; + if (z->state->blocks != Z_NULL) + inflate_blocks_free(z->state->blocks, z); + ZFREE(z, z->state); + z->state = Z_NULL; + Tracev((stderr, "inflate: end\n")); + return Z_OK; +} + + +int ZEXPORT inflateInit2_(z, w, version, stream_size) +z_streamp z; +int w; +const char *version; +int stream_size; +{ + if (version == Z_NULL || version[0] != ZLIB_VERSION[0] || + stream_size != sizeof(z_stream)) + return Z_VERSION_ERROR; + + /* initialize state */ + if (z == Z_NULL) + return Z_STREAM_ERROR; + z->msg = Z_NULL; + if (z->zalloc == Z_NULL) + { + z->zalloc = zcalloc; + z->opaque = (voidpf)0; + } + if (z->zfree == Z_NULL) z->zfree = zcfree; + if ((z->state = (struct internal_state FAR *) + ZALLOC(z,1,sizeof(struct internal_state))) == Z_NULL) + return Z_MEM_ERROR; + z->state->blocks = Z_NULL; + + /* handle undocumented nowrap option (no zlib header or check) */ + z->state->nowrap = 0; + if (w < 0) + { + w = - w; + z->state->nowrap = 1; + } + + /* set window size */ + if (w < 8 || w > 15) + { + inflateEnd(z); + return Z_STREAM_ERROR; + } + z->state->wbits = (uInt)w; + + /* create inflate_blocks state */ + if ((z->state->blocks = + inflate_blocks_new(z, z->state->nowrap ? Z_NULL : adler32, (uInt)1 << w)) + == Z_NULL) + { + inflateEnd(z); + return Z_MEM_ERROR; + } + Tracev((stderr, "inflate: allocated\n")); + + /* reset state */ + inflateReset(z); + return Z_OK; +} + + +int ZEXPORT inflateInit_(z, version, stream_size) +z_streamp z; +const char *version; +int stream_size; +{ + return inflateInit2_(z, DEF_WBITS, version, stream_size); +} + + +#define NEEDBYTE {if(z->avail_in==0)return r;r=f;} +#define NEXTBYTE (z->avail_in--,z->total_in++,*z->next_in++) + +int ZEXPORT inflate(z, f) +z_streamp z; +int f; +{ + int r; + uInt b; + + if (z == Z_NULL || z->state == Z_NULL || z->next_in == Z_NULL) + return Z_STREAM_ERROR; + f = f == Z_FINISH ? Z_BUF_ERROR : Z_OK; + r = Z_BUF_ERROR; + while (1) switch (z->state->mode) + { + case METHOD: + NEEDBYTE + if (((z->state->sub.method = NEXTBYTE) & 0xf) != Z_DEFLATED) + { + z->state->mode = BAD; + z->msg = (char*)"unknown compression method"; + z->state->sub.marker = 5; /* can't try inflateSync */ + break; + } + if ((z->state->sub.method >> 4) + 8 > z->state->wbits) + { + z->state->mode = BAD; + z->msg = (char*)"invalid window size"; + z->state->sub.marker = 5; /* can't try inflateSync */ + break; + } + z->state->mode = FLAG; + case FLAG: + NEEDBYTE + b = NEXTBYTE; + if (((z->state->sub.method << 8) + b) % 31) + { + z->state->mode = BAD; + z->msg = (char*)"incorrect header check"; + z->state->sub.marker = 5; /* can't try inflateSync */ + break; + } + Tracev((stderr, "inflate: zlib header ok\n")); + if (!(b & PRESET_DICT)) + { + z->state->mode = BLOCKS; + break; + } + z->state->mode = DICT4; + case DICT4: + NEEDBYTE + z->state->sub.check.need = (uLong)NEXTBYTE << 24; + z->state->mode = DICT3; + case DICT3: + NEEDBYTE + z->state->sub.check.need += (uLong)NEXTBYTE << 16; + z->state->mode = DICT2; + case DICT2: + NEEDBYTE + z->state->sub.check.need += (uLong)NEXTBYTE << 8; + z->state->mode = DICT1; + case DICT1: + NEEDBYTE + z->state->sub.check.need += (uLong)NEXTBYTE; + z->adler = z->state->sub.check.need; + z->state->mode = DICT0; + return Z_NEED_DICT; + case DICT0: + z->state->mode = BAD; + z->msg = (char*)"need dictionary"; + z->state->sub.marker = 0; /* can try inflateSync */ + return Z_STREAM_ERROR; + case BLOCKS: + r = inflate_blocks(z->state->blocks, z, r); + if (r == Z_DATA_ERROR) + { + z->state->mode = BAD; + z->state->sub.marker = 0; /* can try inflateSync */ + break; + } + if (r == Z_OK) + r = f; + if (r != Z_STREAM_END) + return r; + r = f; + inflate_blocks_reset(z->state->blocks, z, &z->state->sub.check.was); + if (z->state->nowrap) + { + z->state->mode = DONE; + break; + } + z->state->mode = CHECK4; + case CHECK4: + NEEDBYTE + z->state->sub.check.need = (uLong)NEXTBYTE << 24; + z->state->mode = CHECK3; + case CHECK3: + NEEDBYTE + z->state->sub.check.need += (uLong)NEXTBYTE << 16; + z->state->mode = CHECK2; + case CHECK2: + NEEDBYTE + z->state->sub.check.need += (uLong)NEXTBYTE << 8; + z->state->mode = CHECK1; + case CHECK1: + NEEDBYTE + z->state->sub.check.need += (uLong)NEXTBYTE; + + if (z->state->sub.check.was != z->state->sub.check.need) + { + z->state->mode = BAD; + z->msg = (char*)"incorrect data check"; + z->state->sub.marker = 5; /* can't try inflateSync */ + break; + } + Tracev((stderr, "inflate: zlib check ok\n")); + z->state->mode = DONE; + case DONE: + return Z_STREAM_END; + case BAD: + return Z_DATA_ERROR; + default: + return Z_STREAM_ERROR; + } +#ifdef NEED_DUMMY_RETURN + return Z_STREAM_ERROR; /* Some dumb compilers complain without this */ +#endif +} + + +int ZEXPORT inflateSetDictionary(z, dictionary, dictLength) +z_streamp z; +const Bytef *dictionary; +uInt dictLength; +{ + uInt length = dictLength; + + if (z == Z_NULL || z->state == Z_NULL || z->state->mode != DICT0) + return Z_STREAM_ERROR; + + if (adler32(1L, dictionary, dictLength) != z->adler) return Z_DATA_ERROR; + z->adler = 1L; + + if (length >= ((uInt)1<<z->state->wbits)) + { + length = (1<<z->state->wbits)-1; + dictionary += dictLength - length; + } + inflate_set_dictionary(z->state->blocks, dictionary, length); + z->state->mode = BLOCKS; + return Z_OK; +} + + +int ZEXPORT inflateSync(z) +z_streamp z; +{ + uInt n; /* number of bytes to look at */ + Bytef *p; /* pointer to bytes */ + uInt m; /* number of marker bytes found in a row */ + uLong r, w; /* temporaries to save total_in and total_out */ + + /* set up */ + if (z == Z_NULL || z->state == Z_NULL) + return Z_STREAM_ERROR; + if (z->state->mode != BAD) + { + z->state->mode = BAD; + z->state->sub.marker = 0; + } + if ((n = z->avail_in) == 0) + return Z_BUF_ERROR; + p = z->next_in; + m = z->state->sub.marker; + + /* search */ + while (n && m < 4) + { + static const Byte mark[4] = {0, 0, 0xff, 0xff}; + if (*p == mark[m]) + m++; + else if (*p) + m = 0; + else + m = 4 - m; + p++, n--; + } + + /* restore */ + z->total_in += p - z->next_in; + z->next_in = p; + z->avail_in = n; + z->state->sub.marker = m; + + /* return no joy or set up to restart on a new block */ + if (m != 4) + return Z_DATA_ERROR; + r = z->total_in; w = z->total_out; + inflateReset(z); + z->total_in = r; z->total_out = w; + z->state->mode = BLOCKS; + return Z_OK; +} + + +/* Returns true if inflate is currently at the end of a block generated + * by Z_SYNC_FLUSH or Z_FULL_FLUSH. This function is used by one PPP + * implementation to provide an additional safety check. PPP uses Z_SYNC_FLUSH + * but removes the length bytes of the resulting empty stored block. When + * decompressing, PPP checks that at the end of input packet, inflate is + * waiting for these length bytes. + */ +int ZEXPORT inflateSyncPoint(z) +z_streamp z; +{ + if (z == Z_NULL || z->state == Z_NULL || z->state->blocks == Z_NULL) + return Z_STREAM_ERROR; + return inflate_blocks_sync_point(z->state->blocks); +} diff --git a/Utilities/cmzlib/inftrees.c b/Utilities/cmzlib/inftrees.c new file mode 100644 index 0000000..8b5cf5a --- /dev/null +++ b/Utilities/cmzlib/inftrees.c @@ -0,0 +1,455 @@ +/* inftrees.c -- generate Huffman trees for efficient decoding + * Copyright (C) 1995-2002 Mark Adler + * For conditions of distribution and use, see copyright notice in zlib.h + */ + +#include "zutil.h" +#include "inftrees.h" + +#if !defined(BUILDFIXED) && !defined(STDC) +# define BUILDFIXED /* non ANSI compilers may not accept inffixed.h */ +#endif + +const char inflate_copyright[] = + " inflate 1.1.4 Copyright 1995-2002 Mark Adler "; +/* + If you use the zlib library in a product, an acknowledgment is welcome + in the documentation of your product. If for some reason you cannot + include such an acknowledgment, I would appreciate that you keep this + copyright string in the executable of your product. + */ +struct internal_state {int dummy;}; /* for buggy compilers */ + +/* simplify the use of the inflate_huft type with some defines */ +#define exop word.what.Exop +#define bits word.what.Bits + + +local int huft_build OF(( + uIntf *, /* code lengths in bits */ + uInt, /* number of codes */ + uInt, /* number of "simple" codes */ + const uIntf *, /* list of base values for non-simple codes */ + const uIntf *, /* list of extra bits for non-simple codes */ + inflate_huft * FAR*,/* result: starting table */ + uIntf *, /* maximum lookup bits (returns actual) */ + inflate_huft *, /* space for trees */ + uInt *, /* hufts used in space */ + uIntf * )); /* space for values */ + +/* Tables for deflate from PKZIP's appnote.txt. */ +local const uInt cplens[31] = { /* Copy lengths for literal codes 257..285 */ + 3, 4, 5, 6, 7, 8, 9, 10, 11, 13, 15, 17, 19, 23, 27, 31, + 35, 43, 51, 59, 67, 83, 99, 115, 131, 163, 195, 227, 258, 0, 0}; + /* see note #13 above about 258 */ +local const uInt cplext[31] = { /* Extra bits for literal codes 257..285 */ + 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 1, 2, 2, 2, 2, + 3, 3, 3, 3, 4, 4, 4, 4, 5, 5, 5, 5, 0, 112, 112}; /* 112==invalid */ +local const uInt cpdist[30] = { /* Copy offsets for distance codes 0..29 */ + 1, 2, 3, 4, 5, 7, 9, 13, 17, 25, 33, 49, 65, 97, 129, 193, + 257, 385, 513, 769, 1025, 1537, 2049, 3073, 4097, 6145, + 8193, 12289, 16385, 24577}; +local const uInt cpdext[30] = { /* Extra bits for distance codes */ + 0, 0, 0, 0, 1, 1, 2, 2, 3, 3, 4, 4, 5, 5, 6, 6, + 7, 7, 8, 8, 9, 9, 10, 10, 11, 11, + 12, 12, 13, 13}; + +/* + Huffman code decoding is performed using a multi-level table lookup. + The fastest way to decode is to simply build a lookup table whose + size is determined by the longest code. However, the time it takes + to build this table can also be a factor if the data being decoded + is not very long. The most common codes are necessarily the + shortest codes, so those codes dominate the decoding time, and hence + the speed. The idea is you can have a shorter table that decodes the + shorter, more probable codes, and then point to subsidiary tables for + the longer codes. The time it costs to decode the longer codes is + then traded against the time it takes to make longer tables. + + This results of this trade are in the variables lbits and dbits + below. lbits is the number of bits the first level table for literal/ + length codes can decode in one step, and dbits is the same thing for + the distance codes. Subsequent tables are also less than or equal to + those sizes. These values may be adjusted either when all of the + codes are shorter than that, in which case the longest code length in + bits is used, or when the shortest code is *longer* than the requested + table size, in which case the length of the shortest code in bits is + used. + + There are two different values for the two tables, since they code a + different number of possibilities each. The literal/length table + codes 286 possible values, or in a flat code, a little over eight + bits. The distance table codes 30 possible values, or a little less + than five bits, flat. The optimum values for speed end up being + about one bit more than those, so lbits is 8+1 and dbits is 5+1. + The optimum values may differ though from machine to machine, and + possibly even between compilers. Your mileage may vary. + */ + + +/* If BMAX needs to be larger than 16, then h and x[] should be uLong. */ +#define BMAX 15 /* maximum bit length of any code */ + +local int huft_build(b, n, s, d, e, t, m, hp, hn, v) +uIntf *b; /* code lengths in bits (all assumed <= BMAX) */ +uInt n; /* number of codes (assumed <= 288) */ +uInt s; /* number of simple-valued codes (0..s-1) */ +const uIntf *d; /* list of base values for non-simple codes */ +const uIntf *e; /* list of extra bits for non-simple codes */ +inflate_huft * FAR *t; /* result: starting table */ +uIntf *m; /* maximum lookup bits, returns actual */ +inflate_huft *hp; /* space for trees */ +uInt *hn; /* hufts used in space */ +uIntf *v; /* working area: values in order of bit length */ +/* Given a list of code lengths and a maximum table size, make a set of + tables to decode that set of codes. Return Z_OK on success, Z_BUF_ERROR + if the given code set is incomplete (the tables are still built in this + case), or Z_DATA_ERROR if the input is invalid. */ +{ + + uInt a; /* counter for codes of length k */ + uInt c[BMAX+1]; /* bit length count table */ + uInt f; /* i repeats in table every f entries */ + int g; /* maximum code length */ + int h; /* table level */ + register uInt i; /* counter, current code */ + register uInt j; /* counter */ + register int k; /* number of bits in current code */ + int l; /* bits per table (returned in m) */ + uInt mask; /* (1 << w) - 1, to avoid cc -O bug on HP */ + register uIntf *p; /* pointer into c[], b[], or v[] */ + inflate_huft *q; /* points to current table */ + struct inflate_huft_s r; /* table entry for structure assignment */ + inflate_huft *u[BMAX]; /* table stack */ + register int w; /* bits before this table == (l * h) */ + uInt x[BMAX+1]; /* bit offsets, then code stack */ + uIntf *xp; /* pointer into x */ + int y; /* number of dummy codes added */ + uInt z; /* number of entries in current table */ + + + /* Generate counts for each bit length */ + p = c; +#define C0 *p++ = 0; +#define C2 C0 C0 C0 C0 +#define C4 C2 C2 C2 C2 + C4 /* clear c[]--assume BMAX+1 is 16 */ + p = b; i = n; + do { + c[*p++]++; /* assume all entries <= BMAX */ + } while (--i); + if (c[0] == n) /* null input--all zero length codes */ + { + *t = (inflate_huft *)Z_NULL; + *m = 0; + return Z_OK; + } + + + /* Find minimum and maximum length, bound *m by those */ + l = *m; + for (j = 1; j <= BMAX; j++) + if (c[j]) + break; + k = j; /* minimum code length */ + if ((uInt)l < j) + l = j; + for (i = BMAX; i; i--) + if (c[i]) + break; + g = i; /* maximum code length */ + if ((uInt)l > i) + l = i; + *m = l; + + + /* Adjust last length count to fill out codes, if needed */ + for (y = 1 << j; j < i; j++, y <<= 1) + if ((y -= c[j]) < 0) + return Z_DATA_ERROR; + if ((y -= c[i]) < 0) + return Z_DATA_ERROR; + c[i] += y; + + + /* Generate starting offsets into the value table for each length */ + x[1] = j = 0; + p = c + 1; xp = x + 2; + while (--i) { /* note that i == g from above */ + *xp++ = (j += *p++); + } + + + /* Make a table of values in order of bit lengths */ + p = b; i = 0; + do { + if ((j = *p++) != 0) + v[x[j]++] = i; + } while (++i < n); + n = x[g]; /* set n to length of v */ + + + /* Generate the Huffman codes and for each, make the table entries */ + x[0] = i = 0; /* first Huffman code is zero */ + p = v; /* grab values in bit order */ + h = -1; /* no tables yet--level -1 */ + w = -l; /* bits decoded == (l * h) */ + u[0] = (inflate_huft *)Z_NULL; /* just to keep compilers happy */ + q = (inflate_huft *)Z_NULL; /* ditto */ + z = 0; /* ditto */ + + /* go through the bit lengths (k already is bits in shortest code) */ + for (; k <= g; k++) + { + a = c[k]; + while (a--) + { + /* here i is the Huffman code of length k bits for value *p */ + /* make tables up to required level */ + while (k > w + l) + { + h++; + w += l; /* previous table always l bits */ + + /* compute minimum size table less than or equal to l bits */ + z = g - w; + z = z > (uInt)l ? (uInt)l : z; /* table size upper limit */ + if ((f = 1 << (j = k - w)) > a + 1) /* try a k-w bit table */ + { /* too few codes for k-w bit table */ + f -= a + 1; /* deduct codes from patterns left */ + xp = c + k; + if (j < z) + while (++j < z) /* try smaller tables up to z bits */ + { + if ((f <<= 1) <= *++xp) + break; /* enough codes to use up j bits */ + f -= *xp; /* else deduct codes from patterns */ + } + } + z = 1 << j; /* table entries for j-bit table */ + + /* allocate new table */ + if (*hn + z > MANY) /* (note: doesn't matter for fixed) */ + return Z_DATA_ERROR; /* overflow of MANY */ + u[h] = q = hp + *hn; + *hn += z; + + /* connect to last table, if there is one */ + if (h) + { + x[h] = i; /* save pattern for backing up */ + r.bits = (Byte)l; /* bits to dump before this table */ + r.exop = (Byte)j; /* bits in this table */ + j = i >> (w - l); + r.base = (uInt)(q - u[h-1] - j); /* offset to this table */ + u[h-1][j] = r; /* connect to last table */ + } + else + *t = q; /* first table is returned result */ + } + + /* set up table entry in r */ + r.bits = (Byte)(k - w); + if (p >= v + n) + r.exop = 128 + 64; /* out of values--invalid code */ + else if (*p < s) + { + r.exop = (Byte)(*p < 256 ? 0 : 32 + 64); /* 256 is end-of-block */ + r.base = *p++; /* simple code is just the value */ + } + else + { + r.exop = (Byte)(e[*p - s] + 16 + 64);/* non-simple--look up in lists */ + r.base = d[*p++ - s]; + } + + /* fill code-like entries with r */ + f = 1 << (k - w); + for (j = i >> w; j < z; j += f) + q[j] = r; + + /* backwards increment the k-bit code i */ + for (j = 1 << (k - 1); i & j; j >>= 1) + i ^= j; + i ^= j; + + /* backup over finished tables */ + mask = (1 << w) - 1; /* needed on HP, cc -O bug */ + while ((i & mask) != x[h]) + { + h--; /* don't need to update q */ + w -= l; + mask = (1 << w) - 1; + } + } + } + + + /* Return Z_BUF_ERROR if we were given an incomplete table */ + return y != 0 && g != 1 ? Z_BUF_ERROR : Z_OK; +} + + +int inflate_trees_bits(c, bb, tb, hp, z) +uIntf *c; /* 19 code lengths */ +uIntf *bb; /* bits tree desired/actual depth */ +inflate_huft * FAR *tb; /* bits tree result */ +inflate_huft *hp; /* space for trees */ +z_streamp z; /* for messages */ +{ + int r; + uInt hn = 0; /* hufts used in space */ + uIntf *v; /* work area for huft_build */ + + if ((v = (uIntf*)ZALLOC(z, 19, sizeof(uInt))) == Z_NULL) + return Z_MEM_ERROR; + r = huft_build(c, 19, 19, (uIntf*)Z_NULL, (uIntf*)Z_NULL, + tb, bb, hp, &hn, v); + if (r == Z_DATA_ERROR) + z->msg = (char*)"oversubscribed dynamic bit lengths tree"; + else if (r == Z_BUF_ERROR || *bb == 0) + { + z->msg = (char*)"incomplete dynamic bit lengths tree"; + r = Z_DATA_ERROR; + } + ZFREE(z, v); + return r; +} + + +int inflate_trees_dynamic(nl, nd, c, bl, bd, tl, td, hp, z) +uInt nl; /* number of literal/length codes */ +uInt nd; /* number of distance codes */ +uIntf *c; /* that many (total) code lengths */ +uIntf *bl; /* literal desired/actual bit depth */ +uIntf *bd; /* distance desired/actual bit depth */ +inflate_huft * FAR *tl; /* literal/length tree result */ +inflate_huft * FAR *td; /* distance tree result */ +inflate_huft *hp; /* space for trees */ +z_streamp z; /* for messages */ +{ + int r; + uInt hn = 0; /* hufts used in space */ + uIntf *v; /* work area for huft_build */ + + /* allocate work area */ + if ((v = (uIntf*)ZALLOC(z, 288, sizeof(uInt))) == Z_NULL) + return Z_MEM_ERROR; + + /* build literal/length tree */ + r = huft_build(c, nl, 257, cplens, cplext, tl, bl, hp, &hn, v); + if (r != Z_OK || *bl == 0) + { + if (r == Z_DATA_ERROR) + z->msg = (char*)"oversubscribed literal/length tree"; + else if (r != Z_MEM_ERROR) + { + z->msg = (char*)"incomplete literal/length tree"; + r = Z_DATA_ERROR; + } + ZFREE(z, v); + return r; + } + + /* build distance tree */ + r = huft_build(c + nl, nd, 0, cpdist, cpdext, td, bd, hp, &hn, v); + if (r != Z_OK || (*bd == 0 && nl > 257)) + { + if (r == Z_DATA_ERROR) + z->msg = (char*)"oversubscribed distance tree"; + else if (r == Z_BUF_ERROR) { +#ifdef PKZIP_BUG_WORKAROUND + r = Z_OK; + } +#else + z->msg = (char*)"incomplete distance tree"; + r = Z_DATA_ERROR; + } + else if (r != Z_MEM_ERROR) + { + z->msg = (char*)"empty distance tree with lengths"; + r = Z_DATA_ERROR; + } + ZFREE(z, v); + return r; +#endif + } + + /* done */ + ZFREE(z, v); + return Z_OK; +} + + +/* build fixed tables only once--keep them here */ +#ifdef BUILDFIXED +local int fixed_built = 0; +#define FIXEDH 544 /* number of hufts used by fixed tables */ +local inflate_huft fixed_mem[FIXEDH]; +local uInt fixed_bl; +local uInt fixed_bd; +local inflate_huft *fixed_tl; +local inflate_huft *fixed_td; +#else +#include "inffixed.h" +#endif + + +int inflate_trees_fixed(bl, bd, tl, td, z) +uIntf *bl; /* literal desired/actual bit depth */ +uIntf *bd; /* distance desired/actual bit depth */ +inflate_huft * FAR *tl; /* literal/length tree result */ +inflate_huft * FAR *td; /* distance tree result */ +z_streamp z; /* for memory allocation */ +{ +#ifdef BUILDFIXED + /* build fixed tables if not already */ + if (!fixed_built) + { + int k; /* temporary variable */ + uInt f = 0; /* number of hufts used in fixed_mem */ + uIntf *c; /* length list for huft_build */ + uIntf *v; /* work area for huft_build */ + + /* allocate memory */ + if ((c = (uIntf*)ZALLOC(z, 288, sizeof(uInt))) == Z_NULL) + return Z_MEM_ERROR; + if ((v = (uIntf*)ZALLOC(z, 288, sizeof(uInt))) == Z_NULL) + { + ZFREE(z, c); + return Z_MEM_ERROR; + } + + /* literal table */ + for (k = 0; k < 144; k++) + c[k] = 8; + for (; k < 256; k++) + c[k] = 9; + for (; k < 280; k++) + c[k] = 7; + for (; k < 288; k++) + c[k] = 8; + fixed_bl = 9; + huft_build(c, 288, 257, cplens, cplext, &fixed_tl, &fixed_bl, + fixed_mem, &f, v); + + /* distance table */ + for (k = 0; k < 30; k++) + c[k] = 5; + fixed_bd = 5; + huft_build(c, 30, 0, cpdist, cpdext, &fixed_td, &fixed_bd, + fixed_mem, &f, v); + + /* done */ + ZFREE(z, v); + ZFREE(z, c); + fixed_built = 1; + } +#endif + *bl = fixed_bl; + *bd = fixed_bd; + *tl = fixed_tl; + *td = fixed_td; + z = 0; + return Z_OK; +} diff --git a/Utilities/cmzlib/inftrees.h b/Utilities/cmzlib/inftrees.h new file mode 100644 index 0000000..04b73b7 --- /dev/null +++ b/Utilities/cmzlib/inftrees.h @@ -0,0 +1,58 @@ +/* inftrees.h -- header to use inftrees.c + * Copyright (C) 1995-2002 Mark Adler + * For conditions of distribution and use, see copyright notice in zlib.h + */ + +/* WARNING: this file should *not* be used by applications. It is + part of the implementation of the compression library and is + subject to change. Applications should only use zlib.h. + */ + +/* Huffman code lookup table entry--this entry is four bytes for machines + that have 16-bit pointers (e.g. PC's in the small or medium model). */ + +typedef struct inflate_huft_s FAR inflate_huft; + +struct inflate_huft_s { + union { + struct { + Byte Exop; /* number of extra bits or operation */ + Byte Bits; /* number of bits in this code or subcode */ + } what; + uInt pad; /* pad structure to a power of 2 (4 bytes for */ + } word; /* 16-bit, 8 bytes for 32-bit int's) */ + uInt base; /* literal, length base, distance base, + or table offset */ +}; + +/* Maximum size of dynamic tree. The maximum found in a long but non- + exhaustive search was 1004 huft structures (850 for length/literals + and 154 for distances, the latter actually the result of an + exhaustive search). The actual maximum is not known, but the + value below is more than safe. */ +#define MANY 1440 + +extern int inflate_trees_bits OF(( + uIntf *, /* 19 code lengths */ + uIntf *, /* bits tree desired/actual depth */ + inflate_huft * FAR *, /* bits tree result */ + inflate_huft *, /* space for trees */ + z_streamp)); /* for messages */ + +extern int inflate_trees_dynamic OF(( + uInt, /* number of literal/length codes */ + uInt, /* number of distance codes */ + uIntf *, /* that many (total) code lengths */ + uIntf *, /* literal desired/actual bit depth */ + uIntf *, /* distance desired/actual bit depth */ + inflate_huft * FAR *, /* literal/length tree result */ + inflate_huft * FAR *, /* distance tree result */ + inflate_huft *, /* space for trees */ + z_streamp)); /* for messages */ + +extern int inflate_trees_fixed OF(( + uIntf *, /* literal desired/actual bit depth */ + uIntf *, /* distance desired/actual bit depth */ + inflate_huft * FAR *, /* literal/length tree result */ + inflate_huft * FAR *, /* distance tree result */ + z_streamp)); /* for memory allocation */ diff --git a/Utilities/cmzlib/infutil.c b/Utilities/cmzlib/infutil.c new file mode 100644 index 0000000..9a07622 --- /dev/null +++ b/Utilities/cmzlib/infutil.c @@ -0,0 +1,87 @@ +/* inflate_util.c -- data and routines common to blocks and codes + * Copyright (C) 1995-2002 Mark Adler + * For conditions of distribution and use, see copyright notice in zlib.h + */ + +#include "zutil.h" +#include "infblock.h" +#include "inftrees.h" +#include "infcodes.h" +#include "infutil.h" + +struct inflate_codes_state {int dummy;}; /* for buggy compilers */ + +/* And'ing with mask[n] masks the lower n bits */ +uInt inflate_mask[17] = { + 0x0000, + 0x0001, 0x0003, 0x0007, 0x000f, 0x001f, 0x003f, 0x007f, 0x00ff, + 0x01ff, 0x03ff, 0x07ff, 0x0fff, 0x1fff, 0x3fff, 0x7fff, 0xffff +}; + + +/* copy as much as possible from the sliding window to the output area */ +int inflate_flush(s, z, r) +inflate_blocks_statef *s; +z_streamp z; +int r; +{ + uInt n; + Bytef *p; + Bytef *q; + + /* local copies of source and destination pointers */ + p = z->next_out; + q = s->read; + + /* compute number of bytes to copy as far as end of window */ + n = (uInt)((q <= s->write ? s->write : s->end) - q); + if (n > z->avail_out) n = z->avail_out; + if (n && r == Z_BUF_ERROR) r = Z_OK; + + /* update counters */ + z->avail_out -= n; + z->total_out += n; + + /* update check information */ + if (s->checkfn != Z_NULL) + z->adler = s->check = (*s->checkfn)(s->check, q, n); + + /* copy as far as end of window */ + zmemcpy(p, q, n); + p += n; + q += n; + + /* see if more to copy at beginning of window */ + if (q == s->end) + { + /* wrap pointers */ + q = s->window; + if (s->write == s->end) + s->write = s->window; + + /* compute bytes to copy */ + n = (uInt)(s->write - q); + if (n > z->avail_out) n = z->avail_out; + if (n && r == Z_BUF_ERROR) r = Z_OK; + + /* update counters */ + z->avail_out -= n; + z->total_out += n; + + /* update check information */ + if (s->checkfn != Z_NULL) + z->adler = s->check = (*s->checkfn)(s->check, q, n); + + /* copy */ + zmemcpy(p, q, n); + p += n; + q += n; + } + + /* update pointers */ + z->next_out = p; + s->read = q; + + /* done */ + return r; +} diff --git a/Utilities/cmzlib/infutil.h b/Utilities/cmzlib/infutil.h new file mode 100644 index 0000000..4401df8 --- /dev/null +++ b/Utilities/cmzlib/infutil.h @@ -0,0 +1,98 @@ +/* infutil.h -- types and macros common to blocks and codes + * Copyright (C) 1995-2002 Mark Adler + * For conditions of distribution and use, see copyright notice in zlib.h + */ + +/* WARNING: this file should *not* be used by applications. It is + part of the implementation of the compression library and is + subject to change. Applications should only use zlib.h. + */ + +#ifndef _INFUTIL_H +#define _INFUTIL_H + +typedef enum { + TYPE, /* get type bits (3, including end bit) */ + LENS, /* get lengths for stored */ + STORED, /* processing stored block */ + TABLE, /* get table lengths */ + BTREE, /* get bit lengths tree for a dynamic block */ + DTREE, /* get length, distance trees for a dynamic block */ + CODES, /* processing fixed or dynamic block */ + DRY, /* output remaining window bytes */ + DONE, /* finished last block, done */ + BAD} /* got a data error--stuck here */ +inflate_block_mode; + +/* inflate blocks semi-private state */ +struct inflate_blocks_state { + + /* mode */ + inflate_block_mode mode; /* current inflate_block mode */ + + /* mode dependent information */ + union { + uInt left; /* if STORED, bytes left to copy */ + struct { + uInt table; /* table lengths (14 bits) */ + uInt index; /* index into blens (or border) */ + uIntf *blens; /* bit lengths of codes */ + uInt bb; /* bit length tree depth */ + inflate_huft *tb; /* bit length decoding tree */ + } trees; /* if DTREE, decoding info for trees */ + struct { + inflate_codes_statef + *codes; + } decode; /* if CODES, current state */ + } sub; /* submode */ + uInt last; /* true if this block is the last block */ + + /* mode independent information */ + uInt bitk; /* bits in bit buffer */ + uLong bitb; /* bit buffer */ + inflate_huft *hufts; /* single malloc for tree space */ + Bytef *window; /* sliding window */ + Bytef *end; /* one byte after sliding window */ + Bytef *read; /* window read pointer */ + Bytef *write; /* window write pointer */ + check_func checkfn; /* check function */ + uLong check; /* check on output */ + +}; + + +/* defines for inflate input/output */ +/* update pointers and return */ +#define UPDBITS {s->bitb=b;s->bitk=k;} +#define UPDIN {z->avail_in=n;z->total_in+=p-z->next_in;z->next_in=p;} +#define UPDOUT {s->write=q;} +#define UPDATE {UPDBITS UPDIN UPDOUT} +#define LEAVE {UPDATE return inflate_flush(s,z,r);} +/* get bytes and bits */ +#define LOADIN {p=z->next_in;n=z->avail_in;b=s->bitb;k=s->bitk;} +#define NEEDBYTE {if(n)r=Z_OK;else LEAVE} +#define NEXTBYTE (n--,*p++) +#define NEEDBITS(j) {while(k<(j)){NEEDBYTE;b|=((uLong)NEXTBYTE)<<k;k+=8;}} +#define DUMPBITS(j) {b>>=(j);k-=(j);} +/* output bytes */ +#define WAVAIL (uInt)(q<s->read?s->read-q-1:s->end-q) +#define LOADOUT {q=s->write;m=(uInt)WAVAIL;} +#define WRAP {if(q==s->end&&s->read!=s->window){q=s->window;m=(uInt)WAVAIL;}} +#define FLUSH {UPDOUT r=inflate_flush(s,z,r); LOADOUT} +#define NEEDOUT {if(m==0){WRAP if(m==0){FLUSH WRAP if(m==0) LEAVE}}r=Z_OK;} +#define OUTBYTE(a) {*q++=(Byte)(a);m--;} +/* load local pointers */ +#define LOAD {LOADIN LOADOUT} + +/* masks for lower bits (size given to avoid silly warnings with Visual C++) */ +extern uInt inflate_mask[17]; + +/* copy as much as possible from the sliding window to the output area */ +extern int inflate_flush OF(( + inflate_blocks_statef *, + z_streamp , + int)); + +struct internal_state {int dummy;}; /* for buggy compilers */ + +#endif diff --git a/Utilities/cmzlib/maketree.c b/Utilities/cmzlib/maketree.c new file mode 100644 index 0000000..a16d4b1 --- /dev/null +++ b/Utilities/cmzlib/maketree.c @@ -0,0 +1,85 @@ +/* maketree.c -- make inffixed.h table for decoding fixed codes + * Copyright (C) 1995-2002 Mark Adler + * For conditions of distribution and use, see copyright notice in zlib.h + */ + +/* WARNING: this file should *not* be used by applications. It is + part of the implementation of the compression library and is + subject to change. Applications should only use zlib.h. + */ + +/* This program is included in the distribution for completeness. + You do not need to compile or run this program since inffixed.h + is already included in the distribution. To use this program + you need to compile zlib with BUILDFIXED defined and then compile + and link this program with the zlib library. Then the output of + this program can be piped to inffixed.h. */ + +#include <stdio.h> +#include <stdlib.h> +#include "zutil.h" +#include "inftrees.h" + +/* simplify the use of the inflate_huft type with some defines */ +#define exop word.what.Exop +#define bits word.what.Bits + +/* generate initialization table for an inflate_huft structure array */ +void maketree(uInt b, inflate_huft *t) +{ + int i, e; + + i = 0; + while (1) + { + e = t[i].exop; + if (e && (e & (16+64)) == 0) /* table pointer */ + { + fprintf(stderr, "maketree: cannot initialize sub-tables!\n"); + exit(1); + } + if (i % 4 == 0) + printf("\n "); + printf(" {{{%u,%u}},%u}", t[i].exop, t[i].bits, t[i].base); + if (++i == (1<<b)) + break; + putchar(','); + } + puts(""); +} + +/* create the fixed tables in C initialization syntax */ +void main(void) +{ + int r; + uInt bl, bd; + inflate_huft *tl, *td; + z_stream z; + + z.zalloc = zcalloc; + z.opaque = (voidpf)0; + z.zfree = zcfree; + r = inflate_trees_fixed(&bl, &bd, &tl, &td, &z); + if (r) + { + fprintf(stderr, "inflate_trees_fixed error %d\n", r); + return; + } + puts("/* inffixed.h -- table for decoding fixed codes"); + puts(" * Generated automatically by the maketree.c program"); + puts(" */"); + puts(""); + puts("/* WARNING: this file should *not* be used by applications. It is"); + puts(" part of the implementation of the compression library and is"); + puts(" subject to change. Applications should only use zlib.h."); + puts(" */"); + puts(""); + printf("local uInt fixed_bl = %d;\n", bl); + printf("local uInt fixed_bd = %d;\n", bd); + printf("local inflate_huft fixed_tl[] = {"); + maketree(bl, tl); + puts(" };"); + printf("local inflate_huft fixed_td[] = {"); + maketree(bd, td); + puts(" };"); +} diff --git a/Utilities/cmzlib/minigzip.c b/Utilities/cmzlib/minigzip.c new file mode 100644 index 0000000..678f6fb --- /dev/null +++ b/Utilities/cmzlib/minigzip.c @@ -0,0 +1,320 @@ +/* minigzip.c -- simulate gzip using the zlib compression library + * Copyright (C) 1995-2002 Jean-loup Gailly. + * For conditions of distribution and use, see copyright notice in zlib.h + */ + +/* + * minigzip is a minimal implementation of the gzip utility. This is + * only an example of using zlib and isn't meant to replace the + * full-featured gzip. No attempt is made to deal with file systems + * limiting names to 14 or 8+3 characters, etc... Error checking is + * very limited. So use minigzip only for testing; use gzip for the + * real thing. On MSDOS, use only on file names without extension + * or in pipe mode. + */ + +/* @(#) $Id$ */ + +#include <stdio.h> +#include "zlib.h" + +#ifdef STDC +# include <string.h> +# include <stdlib.h> +#else + extern void exit OF((int)); +#endif + +#ifdef USE_MMAP +# include <sys/types.h> +# include <sys/mman.h> +# include <sys/stat.h> +#endif + +#if defined(MSDOS) || defined(OS2) || defined(WIN32) +# include <fcntl.h> +# include <io.h> +# define SET_BINARY_MODE(file) setmode(fileno(file), O_BINARY) +#else +# define SET_BINARY_MODE(file) +#endif + +#ifdef VMS +# define unlink delete +# define GZ_SUFFIX "-gz" +#endif +#ifdef RISCOS +# define unlink remove +# define GZ_SUFFIX "-gz" +# define fileno(file) file->__file +#endif +#if defined(__MWERKS__) && __dest_os != __be_os && __dest_os != __win32_os +# include <unix.h> /* for fileno */ +#endif + +#ifndef WIN32 /* unlink already in stdio.h for WIN32 */ + extern int unlink OF((const char *)); +#endif + +#ifndef GZ_SUFFIX +# define GZ_SUFFIX ".gz" +#endif +#define SUFFIX_LEN (sizeof(GZ_SUFFIX)-1) + +#define BUFLEN 16384 +#define MAX_NAME_LEN 1024 + +#ifdef MAXSEG_64K +# define local static + /* Needed for systems with limitation on stack size. */ +#else +# define local +#endif + +char *prog; + +void error OF((const char *msg)); +void gz_compress OF((FILE *in, gzFile out)); +#ifdef USE_MMAP +int gz_compress_mmap OF((FILE *in, gzFile out)); +#endif +void gz_uncompress OF((gzFile in, FILE *out)); +void file_compress OF((char *file, char *mode)); +void file_uncompress OF((char *file)); +int main OF((int argc, char *argv[])); + +/* =========================================================================== + * Display error message and exit + */ +void error(msg) + const char *msg; +{ + fprintf(stderr, "%s: %s\n", prog, msg); + exit(1); +} + +/* =========================================================================== + * Compress input to output then close both files. + */ + +void gz_compress(in, out) + FILE *in; + gzFile out; +{ + local char buf[BUFLEN]; + int len; + int err; + +#ifdef USE_MMAP + /* Try first compressing with mmap. If mmap fails (minigzip used in a + * pipe), use the normal fread loop. + */ + if (gz_compress_mmap(in, out) == Z_OK) return; +#endif + for (;;) { + len = fread(buf, 1, sizeof(buf), in); + if (ferror(in)) { + perror("fread"); + exit(1); + } + if (len == 0) break; + + if (gzwrite(out, buf, (unsigned)len) != len) error(gzerror(out, &err)); + } + fclose(in); + if (gzclose(out) != Z_OK) error("failed gzclose"); +} + +#ifdef USE_MMAP /* MMAP version, Miguel Albrecht <malbrech@eso.org> */ + +/* Try compressing the input file at once using mmap. Return Z_OK if + * if success, Z_ERRNO otherwise. + */ +int gz_compress_mmap(in, out) + FILE *in; + gzFile out; +{ + int len; + int err; + int ifd = fileno(in); + caddr_t buf; /* mmap'ed buffer for the entire input file */ + off_t buf_len; /* length of the input file */ + struct stat sb; + + /* Determine the size of the file, needed for mmap: */ + if (fstat(ifd, &sb) < 0) return Z_ERRNO; + buf_len = sb.st_size; + if (buf_len <= 0) return Z_ERRNO; + + /* Now do the actual mmap: */ + buf = mmap((caddr_t) 0, buf_len, PROT_READ, MAP_SHARED, ifd, (off_t)0); + if (buf == (caddr_t)(-1)) return Z_ERRNO; + + /* Compress the whole file at once: */ + len = gzwrite(out, (char *)buf, (unsigned)buf_len); + + if (len != (int)buf_len) error(gzerror(out, &err)); + + munmap(buf, buf_len); + fclose(in); + if (gzclose(out) != Z_OK) error("failed gzclose"); + return Z_OK; +} +#endif /* USE_MMAP */ + +/* =========================================================================== + * Uncompress input to output then close both files. + */ +void gz_uncompress(in, out) + gzFile in; + FILE *out; +{ + local char buf[BUFLEN]; + int len; + int err; + + for (;;) { + len = gzread(in, buf, sizeof(buf)); + if (len < 0) error (gzerror(in, &err)); + if (len == 0) break; + + if ((int)fwrite(buf, 1, (unsigned)len, out) != len) { + error("failed fwrite"); + } + } + if (fclose(out)) error("failed fclose"); + + if (gzclose(in) != Z_OK) error("failed gzclose"); +} + + +/* =========================================================================== + * Compress the given file: create a corresponding .gz file and remove the + * original. + */ +void file_compress(file, mode) + char *file; + char *mode; +{ + local char outfile[MAX_NAME_LEN]; + FILE *in; + gzFile out; + + strcpy(outfile, file); + strcat(outfile, GZ_SUFFIX); + + in = fopen(file, "rb"); + if (in == NULL) { + perror(file); + exit(1); + } + out = gzopen(outfile, mode); + if (out == NULL) { + fprintf(stderr, "%s: can't gzopen %s\n", prog, outfile); + exit(1); + } + gz_compress(in, out); + + unlink(file); +} + + +/* =========================================================================== + * Uncompress the given file and remove the original. + */ +void file_uncompress(file) + char *file; +{ + local char buf[MAX_NAME_LEN]; + char *infile, *outfile; + FILE *out; + gzFile in; + int len = strlen(file); + + strcpy(buf, file); + + if (len > SUFFIX_LEN && strcmp(file+len-SUFFIX_LEN, GZ_SUFFIX) == 0) { + infile = file; + outfile = buf; + outfile[len-3] = '\0'; + } else { + outfile = file; + infile = buf; + strcat(infile, GZ_SUFFIX); + } + in = gzopen(infile, "rb"); + if (in == NULL) { + fprintf(stderr, "%s: can't gzopen %s\n", prog, infile); + exit(1); + } + out = fopen(outfile, "wb"); + if (out == NULL) { + perror(file); + exit(1); + } + + gz_uncompress(in, out); + + unlink(infile); +} + + +/* =========================================================================== + * Usage: minigzip [-d] [-f] [-h] [-1 to -9] [files...] + * -d : decompress + * -f : compress with Z_FILTERED + * -h : compress with Z_HUFFMAN_ONLY + * -1 to -9 : compression level + */ + +int main(argc, argv) + int argc; + char *argv[]; +{ + int uncompr = 0; + gzFile file; + char outmode[20]; + + strcpy(outmode, "wb6 "); + + prog = argv[0]; + argc--, argv++; + + while (argc > 0) { + if (strcmp(*argv, "-d") == 0) + uncompr = 1; + else if (strcmp(*argv, "-f") == 0) + outmode[3] = 'f'; + else if (strcmp(*argv, "-h") == 0) + outmode[3] = 'h'; + else if ((*argv)[0] == '-' && (*argv)[1] >= '1' && (*argv)[1] <= '9' && + (*argv)[2] == 0) + outmode[2] = (*argv)[1]; + else + break; + argc--, argv++; + } + if (argc == 0) { + SET_BINARY_MODE(stdin); + SET_BINARY_MODE(stdout); + if (uncompr) { + file = gzdopen(fileno(stdin), "rb"); + if (file == NULL) error("can't gzdopen stdin"); + gz_uncompress(file, stdout); + } else { + file = gzdopen(fileno(stdout), outmode); + if (file == NULL) error("can't gzdopen stdout"); + gz_compress(stdin, file); + } + } else { + do { + if (uncompr) { + file_uncompress(*argv); + } else { + file_compress(*argv, outmode); + } + } while (argv++, --argc); + } + exit(0); + return 0; /* to avoid warning */ +} diff --git a/Utilities/cmzlib/trees.c b/Utilities/cmzlib/trees.c new file mode 100644 index 0000000..19d0374 --- /dev/null +++ b/Utilities/cmzlib/trees.c @@ -0,0 +1,1214 @@ +/* trees.c -- output deflated data using Huffman coding + * Copyright (C) 1995-2002 Jean-loup Gailly + * For conditions of distribution and use, see copyright notice in zlib.h + */ + +/* + * ALGORITHM + * + * The "deflation" process uses several Huffman trees. The more + * common source values are represented by shorter bit sequences. + * + * Each code tree is stored in a compressed form which is itself + * a Huffman encoding of the lengths of all the code strings (in + * ascending order by source values). The actual code strings are + * reconstructed from the lengths in the inflate process, as described + * in the deflate specification. + * + * REFERENCES + * + * Deutsch, L.P.,"'Deflate' Compressed Data Format Specification". + * Available in ftp.uu.net:/pub/archiving/zip/doc/deflate-1.1.doc + * + * Storer, James A. + * Data Compression: Methods and Theory, pp. 49-50. + * Computer Science Press, 1988. ISBN 0-7167-8156-5. + * + * Sedgewick, R. + * Algorithms, p290. + * Addison-Wesley, 1983. ISBN 0-201-06672-6. + */ + +/* @(#) $Id$ */ + +/* #define GEN_TREES_H */ + +#include "deflate.h" + +#ifdef DEBUG +# include <ctype.h> +#endif + +/* =========================================================================== + * Constants + */ + +#define MAX_BL_BITS 7 +/* Bit length codes must not exceed MAX_BL_BITS bits */ + +#define END_BLOCK 256 +/* end of block literal code */ + +#define REP_3_6 16 +/* repeat previous bit length 3-6 times (2 bits of repeat count) */ + +#define REPZ_3_10 17 +/* repeat a zero length 3-10 times (3 bits of repeat count) */ + +#define REPZ_11_138 18 +/* repeat a zero length 11-138 times (7 bits of repeat count) */ + +local const int extra_lbits[LENGTH_CODES] /* extra bits for each length code */ + = {0,0,0,0,0,0,0,0,1,1,1,1,2,2,2,2,3,3,3,3,4,4,4,4,5,5,5,5,0}; + +local const int extra_dbits[D_CODES] /* extra bits for each distance code */ + = {0,0,0,0,1,1,2,2,3,3,4,4,5,5,6,6,7,7,8,8,9,9,10,10,11,11,12,12,13,13}; + +local const int extra_blbits[BL_CODES]/* extra bits for each bit length code */ + = {0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,2,3,7}; + +local const uch bl_order[BL_CODES] + = {16,17,18,0,8,7,9,6,10,5,11,4,12,3,13,2,14,1,15}; +/* The lengths of the bit length codes are sent in order of decreasing + * probability, to avoid transmitting the lengths for unused bit length codes. + */ + +#define Buf_size (8 * 2*sizeof(char)) +/* Number of bits used within bi_buf. (bi_buf might be implemented on + * more than 16 bits on some systems.) + */ + +/* =========================================================================== + * Local data. These are initialized only once. + */ + +#define DIST_CODE_LEN 512 /* see definition of array dist_code below */ + +#if defined(GEN_TREES_H) || !defined(STDC) +/* non ANSI compilers may not accept trees.h */ + +local ct_data static_ltree[L_CODES+2]; +/* The static literal tree. Since the bit lengths are imposed, there is no + * need for the L_CODES extra codes used during heap construction. However + * The codes 286 and 287 are needed to build a canonical tree (see _tr_init + * below). + */ + +local ct_data static_dtree[D_CODES]; +/* The static distance tree. (Actually a trivial tree since all codes use + * 5 bits.) + */ + +uch _dist_code[DIST_CODE_LEN]; +/* Distance codes. The first 256 values correspond to the distances + * 3 .. 258, the last 256 values correspond to the top 8 bits of + * the 15 bit distances. + */ + +uch _length_code[MAX_MATCH-MIN_MATCH+1]; +/* length code for each normalized match length (0 == MIN_MATCH) */ + +local int base_length[LENGTH_CODES]; +/* First normalized length for each code (0 = MIN_MATCH) */ + +local int base_dist[D_CODES]; +/* First normalized distance for each code (0 = distance of 1) */ + +#else +# include "trees.h" +#endif /* GEN_TREES_H */ + +struct static_tree_desc_s { + const ct_data *static_tree; /* static tree or NULL */ + const intf *extra_bits; /* extra bits for each code or NULL */ + int extra_base; /* base index for extra_bits */ + int elems; /* max number of elements in the tree */ + int max_length; /* max bit length for the codes */ +}; + +local static_tree_desc static_l_desc = +{static_ltree, extra_lbits, LITERALS+1, L_CODES, MAX_BITS}; + +local static_tree_desc static_d_desc = +{static_dtree, extra_dbits, 0, D_CODES, MAX_BITS}; + +local static_tree_desc static_bl_desc = +{(const ct_data *)0, extra_blbits, 0, BL_CODES, MAX_BL_BITS}; + +/* =========================================================================== + * Local (static) routines in this file. + */ + +local void tr_static_init OF((void)); +local void init_block OF((deflate_state *s)); +local void pqdownheap OF((deflate_state *s, ct_data *tree, int k)); +local void gen_bitlen OF((deflate_state *s, tree_desc *desc)); +local void gen_codes OF((ct_data *tree, int max_code, ushf *bl_count)); +local void build_tree OF((deflate_state *s, tree_desc *desc)); +local void scan_tree OF((deflate_state *s, ct_data *tree, int max_code)); +local void send_tree OF((deflate_state *s, ct_data *tree, int max_code)); +local int build_bl_tree OF((deflate_state *s)); +local void send_all_trees OF((deflate_state *s, int lcodes, int dcodes, + int blcodes)); +local void compress_block OF((deflate_state *s, ct_data *ltree, + ct_data *dtree)); +local void set_data_type OF((deflate_state *s)); +local unsigned bi_reverse OF((unsigned value, int length)); +local void bi_windup OF((deflate_state *s)); +local void bi_flush OF((deflate_state *s)); +local void copy_block OF((deflate_state *s, charf *buf, unsigned len, + int header)); + +#ifdef GEN_TREES_H +local void gen_trees_header OF((void)); +#endif + +#ifndef DEBUG +# define send_code(s, c, tree) send_bits(s, tree[c].Code, tree[c].Len) + /* Send a code of the given tree. c and tree must not have side effects */ + +#else /* DEBUG */ +# define send_code(s, c, tree) \ + { if (z_verbose>2) fprintf(stderr,"\ncd %3d ",(c)); \ + send_bits(s, tree[c].Code, tree[c].Len); } +#endif + +/* =========================================================================== + * Output a short LSB first on the stream. + * IN assertion: there is enough room in pendingBuf. + */ +#define put_short(s, w) { \ + put_byte(s, (uch)((w) & 0xff)); \ + put_byte(s, (uch)((ush)(w) >> 8)); \ +} + +/* =========================================================================== + * Send a value on a given number of bits. + * IN assertion: length <= 16 and value fits in length bits. + */ +#ifdef DEBUG +local void send_bits OF((deflate_state *s, int value, int length)); + +local void send_bits(s, value, length) + deflate_state *s; + int value; /* value to send */ + int length; /* number of bits */ +{ + Tracevv((stderr," l %2d v %4x ", length, value)); + Assert(length > 0 && length <= 15, "invalid length"); + s->bits_sent += (ulg)length; + + /* If not enough room in bi_buf, use (valid) bits from bi_buf and + * (16 - bi_valid) bits from value, leaving (width - (16-bi_valid)) + * unused bits in value. + */ + if (s->bi_valid > (int)Buf_size - length) { + s->bi_buf |= (value << s->bi_valid); + put_short(s, s->bi_buf); + s->bi_buf = (ush)value >> (Buf_size - s->bi_valid); + s->bi_valid += length - Buf_size; + } else { + s->bi_buf |= value << s->bi_valid; + s->bi_valid += length; + } +} +#else /* !DEBUG */ + +#define send_bits(s, value, length) \ +{ int len = length;\ + if (s->bi_valid > (int)Buf_size - len) {\ + int val = value;\ + s->bi_buf |= (val << s->bi_valid);\ + put_short(s, s->bi_buf);\ + s->bi_buf = (ush)val >> (Buf_size - s->bi_valid);\ + s->bi_valid += len - Buf_size;\ + } else {\ + s->bi_buf |= (value) << s->bi_valid;\ + s->bi_valid += len;\ + }\ +} +#endif /* DEBUG */ + + +#define MAX(a,b) (a >= b ? a : b) +/* the arguments must not have side effects */ + +/* =========================================================================== + * Initialize the various 'constant' tables. + */ +local void tr_static_init() +{ +#if defined(GEN_TREES_H) || !defined(STDC) + static int static_init_done = 0; + int n; /* iterates over tree elements */ + int bits; /* bit counter */ + int length; /* length value */ + int code; /* code value */ + int dist; /* distance index */ + ush bl_count[MAX_BITS+1]; + /* number of codes at each bit length for an optimal tree */ + + if (static_init_done) return; + + /* For some embedded targets, global variables are not initialized: */ + static_l_desc.static_tree = static_ltree; + static_l_desc.extra_bits = extra_lbits; + static_d_desc.static_tree = static_dtree; + static_d_desc.extra_bits = extra_dbits; + static_bl_desc.extra_bits = extra_blbits; + + /* Initialize the mapping length (0..255) -> length code (0..28) */ + length = 0; + for (code = 0; code < LENGTH_CODES-1; code++) { + base_length[code] = length; + for (n = 0; n < (1<<extra_lbits[code]); n++) { + _length_code[length++] = (uch)code; + } + } + Assert (length == 256, "tr_static_init: length != 256"); + /* Note that the length 255 (match length 258) can be represented + * in two different ways: code 284 + 5 bits or code 285, so we + * overwrite length_code[255] to use the best encoding: + */ + _length_code[length-1] = (uch)code; + + /* Initialize the mapping dist (0..32K) -> dist code (0..29) */ + dist = 0; + for (code = 0 ; code < 16; code++) { + base_dist[code] = dist; + for (n = 0; n < (1<<extra_dbits[code]); n++) { + _dist_code[dist++] = (uch)code; + } + } + Assert (dist == 256, "tr_static_init: dist != 256"); + dist >>= 7; /* from now on, all distances are divided by 128 */ + for ( ; code < D_CODES; code++) { + base_dist[code] = dist << 7; + for (n = 0; n < (1<<(extra_dbits[code]-7)); n++) { + _dist_code[256 + dist++] = (uch)code; + } + } + Assert (dist == 256, "tr_static_init: 256+dist != 512"); + + /* Construct the codes of the static literal tree */ + for (bits = 0; bits <= MAX_BITS; bits++) bl_count[bits] = 0; + n = 0; + while (n <= 143) static_ltree[n++].Len = 8, bl_count[8]++; + while (n <= 255) static_ltree[n++].Len = 9, bl_count[9]++; + while (n <= 279) static_ltree[n++].Len = 7, bl_count[7]++; + while (n <= 287) static_ltree[n++].Len = 8, bl_count[8]++; + /* Codes 286 and 287 do not exist, but we must include them in the + * tree construction to get a canonical Huffman tree (longest code + * all ones) + */ + gen_codes((ct_data *)static_ltree, L_CODES+1, bl_count); + + /* The static distance tree is trivial: */ + for (n = 0; n < D_CODES; n++) { + static_dtree[n].Len = 5; + static_dtree[n].Code = bi_reverse((unsigned)n, 5); + } + static_init_done = 1; + +# ifdef GEN_TREES_H + gen_trees_header(); +# endif +#endif /* defined(GEN_TREES_H) || !defined(STDC) */ +} + +/* =========================================================================== + * Genererate the file trees.h describing the static trees. + */ +#ifdef GEN_TREES_H +# ifndef DEBUG +# include <stdio.h> +# endif + +# define SEPARATOR(i, last, width) \ + ((i) == (last)? "\n};\n\n" : \ + ((i) % (width) == (width)-1 ? ",\n" : ", ")) + +void gen_trees_header() +{ + FILE *header = fopen("trees.h", "w"); + int i; + + Assert (header != NULL, "Can't open trees.h"); + fprintf(header, + "/* header created automatically with -DGEN_TREES_H */\n\n"); + + fprintf(header, "local const ct_data static_ltree[L_CODES+2] = {\n"); + for (i = 0; i < L_CODES+2; i++) { + fprintf(header, "{{%3u},{%3u}}%s", static_ltree[i].Code, + static_ltree[i].Len, SEPARATOR(i, L_CODES+1, 5)); + } + + fprintf(header, "local const ct_data static_dtree[D_CODES] = {\n"); + for (i = 0; i < D_CODES; i++) { + fprintf(header, "{{%2u},{%2u}}%s", static_dtree[i].Code, + static_dtree[i].Len, SEPARATOR(i, D_CODES-1, 5)); + } + + fprintf(header, "const uch _dist_code[DIST_CODE_LEN] = {\n"); + for (i = 0; i < DIST_CODE_LEN; i++) { + fprintf(header, "%2u%s", _dist_code[i], + SEPARATOR(i, DIST_CODE_LEN-1, 20)); + } + + fprintf(header, "const uch _length_code[MAX_MATCH-MIN_MATCH+1]= {\n"); + for (i = 0; i < MAX_MATCH-MIN_MATCH+1; i++) { + fprintf(header, "%2u%s", _length_code[i], + SEPARATOR(i, MAX_MATCH-MIN_MATCH, 20)); + } + + fprintf(header, "local const int base_length[LENGTH_CODES] = {\n"); + for (i = 0; i < LENGTH_CODES; i++) { + fprintf(header, "%1u%s", base_length[i], + SEPARATOR(i, LENGTH_CODES-1, 20)); + } + + fprintf(header, "local const int base_dist[D_CODES] = {\n"); + for (i = 0; i < D_CODES; i++) { + fprintf(header, "%5u%s", base_dist[i], + SEPARATOR(i, D_CODES-1, 10)); + } + + fclose(header); +} +#endif /* GEN_TREES_H */ + +/* =========================================================================== + * Initialize the tree data structures for a new zlib stream. + */ +void _tr_init(s) + deflate_state *s; +{ + tr_static_init(); + + s->l_desc.dyn_tree = s->dyn_ltree; + s->l_desc.stat_desc = &static_l_desc; + + s->d_desc.dyn_tree = s->dyn_dtree; + s->d_desc.stat_desc = &static_d_desc; + + s->bl_desc.dyn_tree = s->bl_tree; + s->bl_desc.stat_desc = &static_bl_desc; + + s->bi_buf = 0; + s->bi_valid = 0; + s->last_eob_len = 8; /* enough lookahead for inflate */ +#ifdef DEBUG + s->compressed_len = 0L; + s->bits_sent = 0L; +#endif + + /* Initialize the first block of the first file: */ + init_block(s); +} + +/* =========================================================================== + * Initialize a new block. + */ +local void init_block(s) + deflate_state *s; +{ + int n; /* iterates over tree elements */ + + /* Initialize the trees. */ + for (n = 0; n < L_CODES; n++) s->dyn_ltree[n].Freq = 0; + for (n = 0; n < D_CODES; n++) s->dyn_dtree[n].Freq = 0; + for (n = 0; n < BL_CODES; n++) s->bl_tree[n].Freq = 0; + + s->dyn_ltree[END_BLOCK].Freq = 1; + s->opt_len = s->static_len = 0L; + s->last_lit = s->matches = 0; +} + +#define SMALLEST 1 +/* Index within the heap array of least frequent node in the Huffman tree */ + + +/* =========================================================================== + * Remove the smallest element from the heap and recreate the heap with + * one less element. Updates heap and heap_len. + */ +#define pqremove(s, tree, top) \ +{\ + top = s->heap[SMALLEST]; \ + s->heap[SMALLEST] = s->heap[s->heap_len--]; \ + pqdownheap(s, tree, SMALLEST); \ +} + +/* =========================================================================== + * Compares to subtrees, using the tree depth as tie breaker when + * the subtrees have equal frequency. This minimizes the worst case length. + */ +#define smaller(tree, n, m, depth) \ + (tree[n].Freq < tree[m].Freq || \ + (tree[n].Freq == tree[m].Freq && depth[n] <= depth[m])) + +/* =========================================================================== + * Restore the heap property by moving down the tree starting at node k, + * exchanging a node with the smallest of its two sons if necessary, stopping + * when the heap property is re-established (each father smaller than its + * two sons). + */ +local void pqdownheap(s, tree, k) + deflate_state *s; + ct_data *tree; /* the tree to restore */ + int k; /* node to move down */ +{ + int v = s->heap[k]; + int j = k << 1; /* left son of k */ + while (j <= s->heap_len) { + /* Set j to the smallest of the two sons: */ + if (j < s->heap_len && + smaller(tree, s->heap[j+1], s->heap[j], s->depth)) { + j++; + } + /* Exit if v is smaller than both sons */ + if (smaller(tree, v, s->heap[j], s->depth)) break; + + /* Exchange v with the smallest son */ + s->heap[k] = s->heap[j]; k = j; + + /* And continue down the tree, setting j to the left son of k */ + j <<= 1; + } + s->heap[k] = v; +} + +/* =========================================================================== + * Compute the optimal bit lengths for a tree and update the total bit length + * for the current block. + * IN assertion: the fields freq and dad are set, heap[heap_max] and + * above are the tree nodes sorted by increasing frequency. + * OUT assertions: the field len is set to the optimal bit length, the + * array bl_count contains the frequencies for each bit length. + * The length opt_len is updated; static_len is also updated if stree is + * not null. + */ +local void gen_bitlen(s, desc) + deflate_state *s; + tree_desc *desc; /* the tree descriptor */ +{ + ct_data *tree = desc->dyn_tree; + int max_code = desc->max_code; + const ct_data *stree = desc->stat_desc->static_tree; + const intf *extra = desc->stat_desc->extra_bits; + int base = desc->stat_desc->extra_base; + int max_length = desc->stat_desc->max_length; + int h; /* heap index */ + int n, m; /* iterate over the tree elements */ + int bits; /* bit length */ + int xbits; /* extra bits */ + ush f; /* frequency */ + int overflow = 0; /* number of elements with bit length too large */ + + for (bits = 0; bits <= MAX_BITS; bits++) s->bl_count[bits] = 0; + + /* In a first pass, compute the optimal bit lengths (which may + * overflow in the case of the bit length tree). + */ + tree[s->heap[s->heap_max]].Len = 0; /* root of the heap */ + + for (h = s->heap_max+1; h < HEAP_SIZE; h++) { + n = s->heap[h]; + bits = tree[tree[n].Dad].Len + 1; + if (bits > max_length) bits = max_length, overflow++; + tree[n].Len = (ush)bits; + /* We overwrite tree[n].Dad which is no longer needed */ + + if (n > max_code) continue; /* not a leaf node */ + + s->bl_count[bits]++; + xbits = 0; + if (n >= base) xbits = extra[n-base]; + f = tree[n].Freq; + s->opt_len += (ulg)f * (bits + xbits); + if (stree) s->static_len += (ulg)f * (stree[n].Len + xbits); + } + if (overflow == 0) return; + + Trace((stderr,"\nbit length overflow\n")); + /* This happens for example on obj2 and pic of the Calgary corpus */ + + /* Find the first bit length which could increase: */ + do { + bits = max_length-1; + while (s->bl_count[bits] == 0) bits--; + s->bl_count[bits]--; /* move one leaf down the tree */ + s->bl_count[bits+1] += 2; /* move one overflow item as its brother */ + s->bl_count[max_length]--; + /* The brother of the overflow item also moves one step up, + * but this does not affect bl_count[max_length] + */ + overflow -= 2; + } while (overflow > 0); + + /* Now recompute all bit lengths, scanning in increasing frequency. + * h is still equal to HEAP_SIZE. (It is simpler to reconstruct all + * lengths instead of fixing only the wrong ones. This idea is taken + * from 'ar' written by Haruhiko Okumura.) + */ + for (bits = max_length; bits != 0; bits--) { + n = s->bl_count[bits]; + while (n != 0) { + m = s->heap[--h]; + if (m > max_code) continue; + if (tree[m].Len != (unsigned) bits) { + Trace((stderr,"code %d bits %d->%d\n", m, tree[m].Len, bits)); + s->opt_len += ((long)bits - (long)tree[m].Len) + *(long)tree[m].Freq; + tree[m].Len = (ush)bits; + } + n--; + } + } +} + +/* =========================================================================== + * Generate the codes for a given tree and bit counts (which need not be + * optimal). + * IN assertion: the array bl_count contains the bit length statistics for + * the given tree and the field len is set for all tree elements. + * OUT assertion: the field code is set for all tree elements of non + * zero code length. + */ +local void gen_codes (tree, max_code, bl_count) + ct_data *tree; /* the tree to decorate */ + int max_code; /* largest code with non zero frequency */ + ushf *bl_count; /* number of codes at each bit length */ +{ + ush next_code[MAX_BITS+1]; /* next code value for each bit length */ + ush code = 0; /* running code value */ + int bits; /* bit index */ + int n; /* code index */ + + /* The distribution counts are first used to generate the code values + * without bit reversal. + */ + for (bits = 1; bits <= MAX_BITS; bits++) { + next_code[bits] = code = (code + bl_count[bits-1]) << 1; + } + /* Check that the bit counts in bl_count are consistent. The last code + * must be all ones. + */ + Assert (code + bl_count[MAX_BITS]-1 == (1<<MAX_BITS)-1, + "inconsistent bit counts"); + Tracev((stderr,"\ngen_codes: max_code %d ", max_code)); + + for (n = 0; n <= max_code; n++) { + int len = tree[n].Len; + if (len == 0) continue; + /* Now reverse the bits */ + tree[n].Code = bi_reverse(next_code[len]++, len); + + Tracecv(tree != static_ltree, (stderr,"\nn %3d %c l %2d c %4x (%x) ", + n, (isgraph(n) ? n : ' '), len, tree[n].Code, next_code[len]-1)); + } +} + +/* =========================================================================== + * Construct one Huffman tree and assigns the code bit strings and lengths. + * Update the total bit length for the current block. + * IN assertion: the field freq is set for all tree elements. + * OUT assertions: the fields len and code are set to the optimal bit length + * and corresponding code. The length opt_len is updated; static_len is + * also updated if stree is not null. The field max_code is set. + */ +local void build_tree(s, desc) + deflate_state *s; + tree_desc *desc; /* the tree descriptor */ +{ + ct_data *tree = desc->dyn_tree; + const ct_data *stree = desc->stat_desc->static_tree; + int elems = desc->stat_desc->elems; + int n, m; /* iterate over heap elements */ + int max_code = -1; /* largest code with non zero frequency */ + int node; /* new node being created */ + + /* Construct the initial heap, with least frequent element in + * heap[SMALLEST]. The sons of heap[n] are heap[2*n] and heap[2*n+1]. + * heap[0] is not used. + */ + s->heap_len = 0, s->heap_max = HEAP_SIZE; + + for (n = 0; n < elems; n++) { + if (tree[n].Freq != 0) { + s->heap[++(s->heap_len)] = max_code = n; + s->depth[n] = 0; + } else { + tree[n].Len = 0; + } + } + + /* The pkzip format requires that at least one distance code exists, + * and that at least one bit should be sent even if there is only one + * possible code. So to avoid special checks later on we force at least + * two codes of non zero frequency. + */ + while (s->heap_len < 2) { + node = s->heap[++(s->heap_len)] = (max_code < 2 ? ++max_code : 0); + tree[node].Freq = 1; + s->depth[node] = 0; + s->opt_len--; if (stree) s->static_len -= stree[node].Len; + /* node is 0 or 1 so it does not have extra bits */ + } + desc->max_code = max_code; + + /* The elements heap[heap_len/2+1 .. heap_len] are leaves of the tree, + * establish sub-heaps of increasing lengths: + */ + for (n = s->heap_len/2; n >= 1; n--) pqdownheap(s, tree, n); + + /* Construct the Huffman tree by repeatedly combining the least two + * frequent nodes. + */ + node = elems; /* next internal node of the tree */ + do { + pqremove(s, tree, n); /* n = node of least frequency */ + m = s->heap[SMALLEST]; /* m = node of next least frequency */ + + s->heap[--(s->heap_max)] = n; /* keep the nodes sorted by frequency */ + s->heap[--(s->heap_max)] = m; + + /* Create a new node father of n and m */ + tree[node].Freq = tree[n].Freq + tree[m].Freq; + s->depth[node] = (uch) (MAX(s->depth[n], s->depth[m]) + 1); + tree[n].Dad = tree[m].Dad = (ush)node; +#ifdef DUMP_BL_TREE + if (tree == s->bl_tree) { + fprintf(stderr,"\nnode %d(%d), sons %d(%d) %d(%d)", + node, tree[node].Freq, n, tree[n].Freq, m, tree[m].Freq); + } +#endif + /* and insert the new node in the heap */ + s->heap[SMALLEST] = node++; + pqdownheap(s, tree, SMALLEST); + + } while (s->heap_len >= 2); + + s->heap[--(s->heap_max)] = s->heap[SMALLEST]; + + /* At this point, the fields freq and dad are set. We can now + * generate the bit lengths. + */ + gen_bitlen(s, (tree_desc *)desc); + + /* The field len is now set, we can generate the bit codes */ + gen_codes ((ct_data *)tree, max_code, s->bl_count); +} + +/* =========================================================================== + * Scan a literal or distance tree to determine the frequencies of the codes + * in the bit length tree. + */ +local void scan_tree (s, tree, max_code) + deflate_state *s; + ct_data *tree; /* the tree to be scanned */ + int max_code; /* and its largest code of non zero frequency */ +{ + int n; /* iterates over all tree elements */ + int prevlen = -1; /* last emitted length */ + int curlen; /* length of current code */ + int nextlen = tree[0].Len; /* length of next code */ + int count = 0; /* repeat count of the current code */ + int max_count = 7; /* max repeat count */ + int min_count = 4; /* min repeat count */ + + if (nextlen == 0) max_count = 138, min_count = 3; + tree[max_code+1].Len = (ush)0xffff; /* guard */ + + for (n = 0; n <= max_code; n++) { + curlen = nextlen; nextlen = tree[n+1].Len; + if (++count < max_count && curlen == nextlen) { + continue; + } else if (count < min_count) { + s->bl_tree[curlen].Freq += count; + } else if (curlen != 0) { + if (curlen != prevlen) s->bl_tree[curlen].Freq++; + s->bl_tree[REP_3_6].Freq++; + } else if (count <= 10) { + s->bl_tree[REPZ_3_10].Freq++; + } else { + s->bl_tree[REPZ_11_138].Freq++; + } + count = 0; prevlen = curlen; + if (nextlen == 0) { + max_count = 138, min_count = 3; + } else if (curlen == nextlen) { + max_count = 6, min_count = 3; + } else { + max_count = 7, min_count = 4; + } + } +} + +/* =========================================================================== + * Send a literal or distance tree in compressed form, using the codes in + * bl_tree. + */ +local void send_tree (s, tree, max_code) + deflate_state *s; + ct_data *tree; /* the tree to be scanned */ + int max_code; /* and its largest code of non zero frequency */ +{ + int n; /* iterates over all tree elements */ + int prevlen = -1; /* last emitted length */ + int curlen; /* length of current code */ + int nextlen = tree[0].Len; /* length of next code */ + int count = 0; /* repeat count of the current code */ + int max_count = 7; /* max repeat count */ + int min_count = 4; /* min repeat count */ + + /* tree[max_code+1].Len = -1; */ /* guard already set */ + if (nextlen == 0) max_count = 138, min_count = 3; + + for (n = 0; n <= max_code; n++) { + curlen = nextlen; nextlen = tree[n+1].Len; + if (++count < max_count && curlen == nextlen) { + continue; + } else if (count < min_count) { + do { send_code(s, curlen, s->bl_tree); } while (--count != 0); + + } else if (curlen != 0) { + if (curlen != prevlen) { + send_code(s, curlen, s->bl_tree); count--; + } + Assert(count >= 3 && count <= 6, " 3_6?"); + send_code(s, REP_3_6, s->bl_tree); send_bits(s, count-3, 2); + + } else if (count <= 10) { + send_code(s, REPZ_3_10, s->bl_tree); send_bits(s, count-3, 3); + + } else { + send_code(s, REPZ_11_138, s->bl_tree); send_bits(s, count-11, 7); + } + count = 0; prevlen = curlen; + if (nextlen == 0) { + max_count = 138, min_count = 3; + } else if (curlen == nextlen) { + max_count = 6, min_count = 3; + } else { + max_count = 7, min_count = 4; + } + } +} + +/* =========================================================================== + * Construct the Huffman tree for the bit lengths and return the index in + * bl_order of the last bit length code to send. + */ +local int build_bl_tree(s) + deflate_state *s; +{ + int max_blindex; /* index of last bit length code of non zero freq */ + + /* Determine the bit length frequencies for literal and distance trees */ + scan_tree(s, (ct_data *)s->dyn_ltree, s->l_desc.max_code); + scan_tree(s, (ct_data *)s->dyn_dtree, s->d_desc.max_code); + + /* Build the bit length tree: */ + build_tree(s, (tree_desc *)(&(s->bl_desc))); + /* opt_len now includes the length of the tree representations, except + * the lengths of the bit lengths codes and the 5+5+4 bits for the counts. + */ + + /* Determine the number of bit length codes to send. The pkzip format + * requires that at least 4 bit length codes be sent. (appnote.txt says + * 3 but the actual value used is 4.) + */ + for (max_blindex = BL_CODES-1; max_blindex >= 3; max_blindex--) { + if (s->bl_tree[bl_order[max_blindex]].Len != 0) break; + } + /* Update opt_len to include the bit length tree and counts */ + s->opt_len += 3*(max_blindex+1) + 5+5+4; + Tracev((stderr, "\ndyn trees: dyn %ld, stat %ld", + s->opt_len, s->static_len)); + + return max_blindex; +} + +/* =========================================================================== + * Send the header for a block using dynamic Huffman trees: the counts, the + * lengths of the bit length codes, the literal tree and the distance tree. + * IN assertion: lcodes >= 257, dcodes >= 1, blcodes >= 4. + */ +local void send_all_trees(s, lcodes, dcodes, blcodes) + deflate_state *s; + int lcodes, dcodes, blcodes; /* number of codes for each tree */ +{ + int rank; /* index in bl_order */ + + Assert (lcodes >= 257 && dcodes >= 1 && blcodes >= 4, "not enough codes"); + Assert (lcodes <= L_CODES && dcodes <= D_CODES && blcodes <= BL_CODES, + "too many codes"); + Tracev((stderr, "\nbl counts: ")); + send_bits(s, lcodes-257, 5); /* not +255 as stated in appnote.txt */ + send_bits(s, dcodes-1, 5); + send_bits(s, blcodes-4, 4); /* not -3 as stated in appnote.txt */ + for (rank = 0; rank < blcodes; rank++) { + Tracev((stderr, "\nbl code %2d ", bl_order[rank])); + send_bits(s, s->bl_tree[bl_order[rank]].Len, 3); + } + Tracev((stderr, "\nbl tree: sent %ld", s->bits_sent)); + + send_tree(s, (ct_data *)s->dyn_ltree, lcodes-1); /* literal tree */ + Tracev((stderr, "\nlit tree: sent %ld", s->bits_sent)); + + send_tree(s, (ct_data *)s->dyn_dtree, dcodes-1); /* distance tree */ + Tracev((stderr, "\ndist tree: sent %ld", s->bits_sent)); +} + +/* =========================================================================== + * Send a stored block + */ +void _tr_stored_block(s, buf, stored_len, eof) + deflate_state *s; + charf *buf; /* input block */ + ulg stored_len; /* length of input block */ + int eof; /* true if this is the last block for a file */ +{ + send_bits(s, (STORED_BLOCK<<1)+eof, 3); /* send block type */ +#ifdef DEBUG + s->compressed_len = (s->compressed_len + 3 + 7) & (ulg)~7L; + s->compressed_len += (stored_len + 4) << 3; +#endif + copy_block(s, buf, (unsigned)stored_len, 1); /* with header */ +} + +/* =========================================================================== + * Send one empty static block to give enough lookahead for inflate. + * This takes 10 bits, of which 7 may remain in the bit buffer. + * The current inflate code requires 9 bits of lookahead. If the + * last two codes for the previous block (real code plus EOB) were coded + * on 5 bits or less, inflate may have only 5+3 bits of lookahead to decode + * the last real code. In this case we send two empty static blocks instead + * of one. (There are no problems if the previous block is stored or fixed.) + * To simplify the code, we assume the worst case of last real code encoded + * on one bit only. + */ +void _tr_align(s) + deflate_state *s; +{ + send_bits(s, STATIC_TREES<<1, 3); + send_code(s, END_BLOCK, static_ltree); +#ifdef DEBUG + s->compressed_len += 10L; /* 3 for block type, 7 for EOB */ +#endif + bi_flush(s); + /* Of the 10 bits for the empty block, we have already sent + * (10 - bi_valid) bits. The lookahead for the last real code (before + * the EOB of the previous block) was thus at least one plus the length + * of the EOB plus what we have just sent of the empty static block. + */ + if (1 + s->last_eob_len + 10 - s->bi_valid < 9) { + send_bits(s, STATIC_TREES<<1, 3); + send_code(s, END_BLOCK, static_ltree); +#ifdef DEBUG + s->compressed_len += 10L; +#endif + bi_flush(s); + } + s->last_eob_len = 7; +} + +/* =========================================================================== + * Determine the best encoding for the current block: dynamic trees, static + * trees or store, and output the encoded block to the zip file. + */ +void _tr_flush_block(s, buf, stored_len, eof) + deflate_state *s; + charf *buf; /* input block, or NULL if too old */ + ulg stored_len; /* length of input block */ + int eof; /* true if this is the last block for a file */ +{ + ulg opt_lenb, static_lenb; /* opt_len and static_len in bytes */ + int max_blindex = 0; /* index of last bit length code of non zero freq */ + + /* Build the Huffman trees unless a stored block is forced */ + if (s->level > 0) { + + /* Check if the file is ascii or binary */ + if (s->data_type == Z_UNKNOWN) set_data_type(s); + + /* Construct the literal and distance trees */ + build_tree(s, (tree_desc *)(&(s->l_desc))); + Tracev((stderr, "\nlit data: dyn %ld, stat %ld", s->opt_len, + s->static_len)); + + build_tree(s, (tree_desc *)(&(s->d_desc))); + Tracev((stderr, "\ndist data: dyn %ld, stat %ld", s->opt_len, + s->static_len)); + /* At this point, opt_len and static_len are the total bit lengths of + * the compressed block data, excluding the tree representations. + */ + + /* Build the bit length tree for the above two trees, and get the index + * in bl_order of the last bit length code to send. + */ + max_blindex = build_bl_tree(s); + + /* Determine the best encoding. Compute first the block length in bytes*/ + opt_lenb = (s->opt_len+3+7)>>3; + static_lenb = (s->static_len+3+7)>>3; + + Tracev((stderr, "\nopt %lu(%lu) stat %lu(%lu) stored %lu lit %u ", + opt_lenb, s->opt_len, static_lenb, s->static_len, stored_len, + s->last_lit)); + + if (static_lenb <= opt_lenb) opt_lenb = static_lenb; + + } else { + Assert(buf != (char*)0, "lost buf"); + opt_lenb = static_lenb = stored_len + 5; /* force a stored block */ + } + +#ifdef FORCE_STORED + if (buf != (char*)0) { /* force stored block */ +#else + if (stored_len+4 <= opt_lenb && buf != (char*)0) { + /* 4: two words for the lengths */ +#endif + /* The test buf != NULL is only necessary if LIT_BUFSIZE > WSIZE. + * Otherwise we can't have processed more than WSIZE input bytes since + * the last block flush, because compression would have been + * successful. If LIT_BUFSIZE <= WSIZE, it is never too late to + * transform a block into a stored block. + */ + _tr_stored_block(s, buf, stored_len, eof); + +#ifdef FORCE_STATIC + } else if (static_lenb >= 0) { /* force static trees */ +#else + } else if (static_lenb == opt_lenb) { +#endif + send_bits(s, (STATIC_TREES<<1)+eof, 3); + compress_block(s, (ct_data *)static_ltree, (ct_data *)static_dtree); +#ifdef DEBUG + s->compressed_len += 3 + s->static_len; +#endif + } else { + send_bits(s, (DYN_TREES<<1)+eof, 3); + send_all_trees(s, s->l_desc.max_code+1, s->d_desc.max_code+1, + max_blindex+1); + compress_block(s, (ct_data *)s->dyn_ltree, (ct_data *)s->dyn_dtree); +#ifdef DEBUG + s->compressed_len += 3 + s->opt_len; +#endif + } + Assert (s->compressed_len == s->bits_sent, "bad compressed size"); + /* The above check is made mod 2^32, for files larger than 512 MB + * and uLong implemented on 32 bits. + */ + init_block(s); + + if (eof) { + bi_windup(s); +#ifdef DEBUG + s->compressed_len += 7; /* align on byte boundary */ +#endif + } + Tracev((stderr,"\ncomprlen %lu(%lu) ", s->compressed_len>>3, + s->compressed_len-7*eof)); +} + +/* =========================================================================== + * Save the match info and tally the frequency counts. Return true if + * the current block must be flushed. + */ +int _tr_tally (s, dist, lc) + deflate_state *s; + unsigned dist; /* distance of matched string */ + unsigned lc; /* match length-MIN_MATCH or unmatched char (if dist==0) */ +{ + s->d_buf[s->last_lit] = (ush)dist; + s->l_buf[s->last_lit++] = (uch)lc; + if (dist == 0) { + /* lc is the unmatched char */ + s->dyn_ltree[lc].Freq++; + } else { + s->matches++; + /* Here, lc is the match length - MIN_MATCH */ + dist--; /* dist = match distance - 1 */ + Assert((ush)dist < (ush)MAX_DIST(s) && + (ush)lc <= (ush)(MAX_MATCH-MIN_MATCH) && + (ush)d_code(dist) < (ush)D_CODES, "_tr_tally: bad match"); + + s->dyn_ltree[_length_code[lc]+LITERALS+1].Freq++; + s->dyn_dtree[d_code(dist)].Freq++; + } + +#ifdef TRUNCATE_BLOCK + /* Try to guess if it is profitable to stop the current block here */ + if ((s->last_lit & 0x1fff) == 0 && s->level > 2) { + /* Compute an upper bound for the compressed length */ + ulg out_length = (ulg)s->last_lit*8L; + ulg in_length = (ulg)((long)s->strstart - s->block_start); + int dcode; + for (dcode = 0; dcode < D_CODES; dcode++) { + out_length += (ulg)s->dyn_dtree[dcode].Freq * + (5L+extra_dbits[dcode]); + } + out_length >>= 3; + Tracev((stderr,"\nlast_lit %u, in %ld, out ~%ld(%ld%%) ", + s->last_lit, in_length, out_length, + 100L - out_length*100L/in_length)); + if (s->matches < s->last_lit/2 && out_length < in_length/2) return 1; + } +#endif + return (s->last_lit == s->lit_bufsize-1); + /* We avoid equality with lit_bufsize because of wraparound at 64K + * on 16 bit machines and because stored blocks are restricted to + * 64K-1 bytes. + */ +} + +/* =========================================================================== + * Send the block data compressed using the given Huffman trees + */ +local void compress_block(s, ltree, dtree) + deflate_state *s; + ct_data *ltree; /* literal tree */ + ct_data *dtree; /* distance tree */ +{ + unsigned dist; /* distance of matched string */ + int lc; /* match length or unmatched char (if dist == 0) */ + unsigned lx = 0; /* running index in l_buf */ + unsigned code; /* the code to send */ + int extra; /* number of extra bits to send */ + + if (s->last_lit != 0) do { + dist = s->d_buf[lx]; + lc = s->l_buf[lx++]; + if (dist == 0) { + send_code(s, lc, ltree); /* send a literal byte */ + Tracecv(isgraph(lc), (stderr," '%c' ", lc)); + } else { + /* Here, lc is the match length - MIN_MATCH */ + code = _length_code[lc]; + send_code(s, code+LITERALS+1, ltree); /* send the length code */ + extra = extra_lbits[code]; + if (extra != 0) { + lc -= base_length[code]; + send_bits(s, lc, extra); /* send the extra length bits */ + } + dist--; /* dist is now the match distance - 1 */ + code = d_code(dist); + Assert (code < D_CODES, "bad d_code"); + + send_code(s, code, dtree); /* send the distance code */ + extra = extra_dbits[code]; + if (extra != 0) { + dist -= base_dist[code]; + send_bits(s, dist, extra); /* send the extra distance bits */ + } + } /* literal or match pair ? */ + + /* Check that the overlay between pending_buf and d_buf+l_buf is ok: */ + Assert(s->pending < s->lit_bufsize + 2*lx, "pendingBuf overflow"); + + } while (lx < s->last_lit); + + send_code(s, END_BLOCK, ltree); + s->last_eob_len = ltree[END_BLOCK].Len; +} + +/* =========================================================================== + * Set the data type to ASCII or BINARY, using a crude approximation: + * binary if more than 20% of the bytes are <= 6 or >= 128, ascii otherwise. + * IN assertion: the fields freq of dyn_ltree are set and the total of all + * frequencies does not exceed 64K (to fit in an int on 16 bit machines). + */ +local void set_data_type(s) + deflate_state *s; +{ + int n = 0; + unsigned ascii_freq = 0; + unsigned bin_freq = 0; + while (n < 7) bin_freq += s->dyn_ltree[n++].Freq; + while (n < 128) ascii_freq += s->dyn_ltree[n++].Freq; + while (n < LITERALS) bin_freq += s->dyn_ltree[n++].Freq; + s->data_type = (Byte)(bin_freq > (ascii_freq >> 2) ? Z_BINARY : Z_ASCII); +} + +/* =========================================================================== + * Reverse the first len bits of a code, using straightforward code (a faster + * method would use a table) + * IN assertion: 1 <= len <= 15 + */ +local unsigned bi_reverse(code, len) + unsigned code; /* the value to invert */ + int len; /* its bit length */ +{ + register unsigned res = 0; + do { + res |= code & 1; + code >>= 1, res <<= 1; + } while (--len > 0); + return res >> 1; +} + +/* =========================================================================== + * Flush the bit buffer, keeping at most 7 bits in it. + */ +local void bi_flush(s) + deflate_state *s; +{ + if (s->bi_valid == 16) { + put_short(s, s->bi_buf); + s->bi_buf = 0; + s->bi_valid = 0; + } else if (s->bi_valid >= 8) { + put_byte(s, (Byte)s->bi_buf); + s->bi_buf >>= 8; + s->bi_valid -= 8; + } +} + +/* =========================================================================== + * Flush the bit buffer and align the output on a byte boundary + */ +local void bi_windup(s) + deflate_state *s; +{ + if (s->bi_valid > 8) { + put_short(s, s->bi_buf); + } else if (s->bi_valid > 0) { + put_byte(s, (Byte)s->bi_buf); + } + s->bi_buf = 0; + s->bi_valid = 0; +#ifdef DEBUG + s->bits_sent = (s->bits_sent+7) & ~7; +#endif +} + +/* =========================================================================== + * Copy a stored block, storing first the length and its + * one's complement if requested. + */ +local void copy_block(s, buf, len, header) + deflate_state *s; + charf *buf; /* the input data */ + unsigned len; /* its length */ + int header; /* true if block header must be written */ +{ + bi_windup(s); /* align on byte boundary */ + s->last_eob_len = 8; /* enough lookahead for inflate */ + + if (header) { + put_short(s, (ush)len); + put_short(s, (ush)~len); +#ifdef DEBUG + s->bits_sent += 2*16; +#endif + } +#ifdef DEBUG + s->bits_sent += (ulg)len<<3; +#endif + while (len--) { + put_byte(s, *buf++); + } +} diff --git a/Utilities/cmzlib/trees.h b/Utilities/cmzlib/trees.h new file mode 100644 index 0000000..72facf9 --- /dev/null +++ b/Utilities/cmzlib/trees.h @@ -0,0 +1,128 @@ +/* header created automatically with -DGEN_TREES_H */ + +local const ct_data static_ltree[L_CODES+2] = { +{{ 12},{ 8}}, {{140},{ 8}}, {{ 76},{ 8}}, {{204},{ 8}}, {{ 44},{ 8}}, +{{172},{ 8}}, {{108},{ 8}}, {{236},{ 8}}, {{ 28},{ 8}}, {{156},{ 8}}, +{{ 92},{ 8}}, {{220},{ 8}}, {{ 60},{ 8}}, {{188},{ 8}}, {{124},{ 8}}, +{{252},{ 8}}, {{ 2},{ 8}}, {{130},{ 8}}, {{ 66},{ 8}}, {{194},{ 8}}, +{{ 34},{ 8}}, {{162},{ 8}}, {{ 98},{ 8}}, {{226},{ 8}}, {{ 18},{ 8}}, +{{146},{ 8}}, {{ 82},{ 8}}, {{210},{ 8}}, {{ 50},{ 8}}, {{178},{ 8}}, +{{114},{ 8}}, {{242},{ 8}}, {{ 10},{ 8}}, {{138},{ 8}}, {{ 74},{ 8}}, +{{202},{ 8}}, {{ 42},{ 8}}, {{170},{ 8}}, {{106},{ 8}}, {{234},{ 8}}, +{{ 26},{ 8}}, {{154},{ 8}}, {{ 90},{ 8}}, {{218},{ 8}}, {{ 58},{ 8}}, +{{186},{ 8}}, {{122},{ 8}}, {{250},{ 8}}, {{ 6},{ 8}}, {{134},{ 8}}, +{{ 70},{ 8}}, {{198},{ 8}}, {{ 38},{ 8}}, {{166},{ 8}}, {{102},{ 8}}, +{{230},{ 8}}, {{ 22},{ 8}}, {{150},{ 8}}, {{ 86},{ 8}}, {{214},{ 8}}, +{{ 54},{ 8}}, {{182},{ 8}}, {{118},{ 8}}, {{246},{ 8}}, {{ 14},{ 8}}, +{{142},{ 8}}, {{ 78},{ 8}}, {{206},{ 8}}, {{ 46},{ 8}}, {{174},{ 8}}, +{{110},{ 8}}, {{238},{ 8}}, {{ 30},{ 8}}, {{158},{ 8}}, {{ 94},{ 8}}, +{{222},{ 8}}, {{ 62},{ 8}}, {{190},{ 8}}, {{126},{ 8}}, {{254},{ 8}}, +{{ 1},{ 8}}, {{129},{ 8}}, {{ 65},{ 8}}, {{193},{ 8}}, {{ 33},{ 8}}, +{{161},{ 8}}, {{ 97},{ 8}}, {{225},{ 8}}, {{ 17},{ 8}}, {{145},{ 8}}, +{{ 81},{ 8}}, {{209},{ 8}}, {{ 49},{ 8}}, {{177},{ 8}}, {{113},{ 8}}, +{{241},{ 8}}, {{ 9},{ 8}}, {{137},{ 8}}, {{ 73},{ 8}}, {{201},{ 8}}, +{{ 41},{ 8}}, {{169},{ 8}}, {{105},{ 8}}, {{233},{ 8}}, {{ 25},{ 8}}, +{{153},{ 8}}, {{ 89},{ 8}}, {{217},{ 8}}, {{ 57},{ 8}}, {{185},{ 8}}, +{{121},{ 8}}, {{249},{ 8}}, {{ 5},{ 8}}, {{133},{ 8}}, {{ 69},{ 8}}, +{{197},{ 8}}, {{ 37},{ 8}}, {{165},{ 8}}, {{101},{ 8}}, {{229},{ 8}}, +{{ 21},{ 8}}, {{149},{ 8}}, {{ 85},{ 8}}, {{213},{ 8}}, {{ 53},{ 8}}, +{{181},{ 8}}, {{117},{ 8}}, {{245},{ 8}}, {{ 13},{ 8}}, {{141},{ 8}}, +{{ 77},{ 8}}, {{205},{ 8}}, {{ 45},{ 8}}, {{173},{ 8}}, {{109},{ 8}}, +{{237},{ 8}}, {{ 29},{ 8}}, {{157},{ 8}}, {{ 93},{ 8}}, {{221},{ 8}}, +{{ 61},{ 8}}, {{189},{ 8}}, {{125},{ 8}}, {{253},{ 8}}, {{ 19},{ 9}}, +{{275},{ 9}}, {{147},{ 9}}, {{403},{ 9}}, {{ 83},{ 9}}, {{339},{ 9}}, +{{211},{ 9}}, {{467},{ 9}}, {{ 51},{ 9}}, {{307},{ 9}}, {{179},{ 9}}, +{{435},{ 9}}, {{115},{ 9}}, {{371},{ 9}}, {{243},{ 9}}, {{499},{ 9}}, +{{ 11},{ 9}}, {{267},{ 9}}, {{139},{ 9}}, {{395},{ 9}}, {{ 75},{ 9}}, +{{331},{ 9}}, {{203},{ 9}}, {{459},{ 9}}, {{ 43},{ 9}}, {{299},{ 9}}, +{{171},{ 9}}, {{427},{ 9}}, {{107},{ 9}}, {{363},{ 9}}, {{235},{ 9}}, +{{491},{ 9}}, {{ 27},{ 9}}, {{283},{ 9}}, {{155},{ 9}}, {{411},{ 9}}, +{{ 91},{ 9}}, {{347},{ 9}}, {{219},{ 9}}, {{475},{ 9}}, {{ 59},{ 9}}, +{{315},{ 9}}, {{187},{ 9}}, {{443},{ 9}}, {{123},{ 9}}, {{379},{ 9}}, +{{251},{ 9}}, {{507},{ 9}}, {{ 7},{ 9}}, {{263},{ 9}}, {{135},{ 9}}, +{{391},{ 9}}, {{ 71},{ 9}}, {{327},{ 9}}, {{199},{ 9}}, {{455},{ 9}}, +{{ 39},{ 9}}, {{295},{ 9}}, {{167},{ 9}}, {{423},{ 9}}, {{103},{ 9}}, +{{359},{ 9}}, {{231},{ 9}}, {{487},{ 9}}, {{ 23},{ 9}}, {{279},{ 9}}, +{{151},{ 9}}, {{407},{ 9}}, {{ 87},{ 9}}, {{343},{ 9}}, {{215},{ 9}}, +{{471},{ 9}}, {{ 55},{ 9}}, {{311},{ 9}}, {{183},{ 9}}, {{439},{ 9}}, +{{119},{ 9}}, {{375},{ 9}}, {{247},{ 9}}, {{503},{ 9}}, {{ 15},{ 9}}, +{{271},{ 9}}, {{143},{ 9}}, {{399},{ 9}}, {{ 79},{ 9}}, {{335},{ 9}}, +{{207},{ 9}}, {{463},{ 9}}, {{ 47},{ 9}}, {{303},{ 9}}, {{175},{ 9}}, +{{431},{ 9}}, {{111},{ 9}}, {{367},{ 9}}, {{239},{ 9}}, {{495},{ 9}}, +{{ 31},{ 9}}, {{287},{ 9}}, {{159},{ 9}}, {{415},{ 9}}, {{ 95},{ 9}}, +{{351},{ 9}}, {{223},{ 9}}, {{479},{ 9}}, {{ 63},{ 9}}, {{319},{ 9}}, +{{191},{ 9}}, {{447},{ 9}}, {{127},{ 9}}, {{383},{ 9}}, {{255},{ 9}}, +{{511},{ 9}}, {{ 0},{ 7}}, {{ 64},{ 7}}, {{ 32},{ 7}}, {{ 96},{ 7}}, +{{ 16},{ 7}}, {{ 80},{ 7}}, {{ 48},{ 7}}, {{112},{ 7}}, {{ 8},{ 7}}, +{{ 72},{ 7}}, {{ 40},{ 7}}, {{104},{ 7}}, {{ 24},{ 7}}, {{ 88},{ 7}}, +{{ 56},{ 7}}, {{120},{ 7}}, {{ 4},{ 7}}, {{ 68},{ 7}}, {{ 36},{ 7}}, +{{100},{ 7}}, {{ 20},{ 7}}, {{ 84},{ 7}}, {{ 52},{ 7}}, {{116},{ 7}}, +{{ 3},{ 8}}, {{131},{ 8}}, {{ 67},{ 8}}, {{195},{ 8}}, {{ 35},{ 8}}, +{{163},{ 8}}, {{ 99},{ 8}}, {{227},{ 8}} +}; + +local const ct_data static_dtree[D_CODES] = { +{{ 0},{ 5}}, {{16},{ 5}}, {{ 8},{ 5}}, {{24},{ 5}}, {{ 4},{ 5}}, +{{20},{ 5}}, {{12},{ 5}}, {{28},{ 5}}, {{ 2},{ 5}}, {{18},{ 5}}, +{{10},{ 5}}, {{26},{ 5}}, {{ 6},{ 5}}, {{22},{ 5}}, {{14},{ 5}}, +{{30},{ 5}}, {{ 1},{ 5}}, {{17},{ 5}}, {{ 9},{ 5}}, {{25},{ 5}}, +{{ 5},{ 5}}, {{21},{ 5}}, {{13},{ 5}}, {{29},{ 5}}, {{ 3},{ 5}}, +{{19},{ 5}}, {{11},{ 5}}, {{27},{ 5}}, {{ 7},{ 5}}, {{23},{ 5}} +}; + +const uch _dist_code[DIST_CODE_LEN] = { + 0, 1, 2, 3, 4, 4, 5, 5, 6, 6, 6, 6, 7, 7, 7, 7, 8, 8, 8, 8, + 8, 8, 8, 8, 9, 9, 9, 9, 9, 9, 9, 9, 10, 10, 10, 10, 10, 10, 10, 10, +10, 10, 10, 10, 10, 10, 10, 10, 11, 11, 11, 11, 11, 11, 11, 11, 11, 11, 11, 11, +11, 11, 11, 11, 12, 12, 12, 12, 12, 12, 12, 12, 12, 12, 12, 12, 12, 12, 12, 12, +12, 12, 12, 12, 12, 12, 12, 12, 12, 12, 12, 12, 12, 12, 12, 12, 13, 13, 13, 13, +13, 13, 13, 13, 13, 13, 13, 13, 13, 13, 13, 13, 13, 13, 13, 13, 13, 13, 13, 13, +13, 13, 13, 13, 13, 13, 13, 13, 14, 14, 14, 14, 14, 14, 14, 14, 14, 14, 14, 14, +14, 14, 14, 14, 14, 14, 14, 14, 14, 14, 14, 14, 14, 14, 14, 14, 14, 14, 14, 14, +14, 14, 14, 14, 14, 14, 14, 14, 14, 14, 14, 14, 14, 14, 14, 14, 14, 14, 14, 14, +14, 14, 14, 14, 14, 14, 14, 14, 14, 14, 14, 14, 15, 15, 15, 15, 15, 15, 15, 15, +15, 15, 15, 15, 15, 15, 15, 15, 15, 15, 15, 15, 15, 15, 15, 15, 15, 15, 15, 15, +15, 15, 15, 15, 15, 15, 15, 15, 15, 15, 15, 15, 15, 15, 15, 15, 15, 15, 15, 15, +15, 15, 15, 15, 15, 15, 15, 15, 15, 15, 15, 15, 15, 15, 15, 15, 0, 0, 16, 17, +18, 18, 19, 19, 20, 20, 20, 20, 21, 21, 21, 21, 22, 22, 22, 22, 22, 22, 22, 22, +23, 23, 23, 23, 23, 23, 23, 23, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, +24, 24, 24, 24, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, +26, 26, 26, 26, 26, 26, 26, 26, 26, 26, 26, 26, 26, 26, 26, 26, 26, 26, 26, 26, +26, 26, 26, 26, 26, 26, 26, 26, 26, 26, 26, 26, 27, 27, 27, 27, 27, 27, 27, 27, +27, 27, 27, 27, 27, 27, 27, 27, 27, 27, 27, 27, 27, 27, 27, 27, 27, 27, 27, 27, +27, 27, 27, 27, 28, 28, 28, 28, 28, 28, 28, 28, 28, 28, 28, 28, 28, 28, 28, 28, +28, 28, 28, 28, 28, 28, 28, 28, 28, 28, 28, 28, 28, 28, 28, 28, 28, 28, 28, 28, +28, 28, 28, 28, 28, 28, 28, 28, 28, 28, 28, 28, 28, 28, 28, 28, 28, 28, 28, 28, +28, 28, 28, 28, 28, 28, 28, 28, 29, 29, 29, 29, 29, 29, 29, 29, 29, 29, 29, 29, +29, 29, 29, 29, 29, 29, 29, 29, 29, 29, 29, 29, 29, 29, 29, 29, 29, 29, 29, 29, +29, 29, 29, 29, 29, 29, 29, 29, 29, 29, 29, 29, 29, 29, 29, 29, 29, 29, 29, 29, +29, 29, 29, 29, 29, 29, 29, 29, 29, 29, 29, 29 +}; + +const uch _length_code[MAX_MATCH-MIN_MATCH+1]= { + 0, 1, 2, 3, 4, 5, 6, 7, 8, 8, 9, 9, 10, 10, 11, 11, 12, 12, 12, 12, +13, 13, 13, 13, 14, 14, 14, 14, 15, 15, 15, 15, 16, 16, 16, 16, 16, 16, 16, 16, +17, 17, 17, 17, 17, 17, 17, 17, 18, 18, 18, 18, 18, 18, 18, 18, 19, 19, 19, 19, +19, 19, 19, 19, 20, 20, 20, 20, 20, 20, 20, 20, 20, 20, 20, 20, 20, 20, 20, 20, +21, 21, 21, 21, 21, 21, 21, 21, 21, 21, 21, 21, 21, 21, 21, 21, 22, 22, 22, 22, +22, 22, 22, 22, 22, 22, 22, 22, 22, 22, 22, 22, 23, 23, 23, 23, 23, 23, 23, 23, +23, 23, 23, 23, 23, 23, 23, 23, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, +24, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, +25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, +25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 26, 26, 26, 26, 26, 26, 26, 26, +26, 26, 26, 26, 26, 26, 26, 26, 26, 26, 26, 26, 26, 26, 26, 26, 26, 26, 26, 26, +26, 26, 26, 26, 27, 27, 27, 27, 27, 27, 27, 27, 27, 27, 27, 27, 27, 27, 27, 27, +27, 27, 27, 27, 27, 27, 27, 27, 27, 27, 27, 27, 27, 27, 27, 28 +}; + +local const int base_length[LENGTH_CODES] = { +0, 1, 2, 3, 4, 5, 6, 7, 8, 10, 12, 14, 16, 20, 24, 28, 32, 40, 48, 56, +64, 80, 96, 112, 128, 160, 192, 224, 0 +}; + +local const int base_dist[D_CODES] = { + 0, 1, 2, 3, 4, 6, 8, 12, 16, 24, + 32, 48, 64, 96, 128, 192, 256, 384, 512, 768, + 1024, 1536, 2048, 3072, 4096, 6144, 8192, 12288, 16384, 24576 +}; + diff --git a/Utilities/cmzlib/uncompr.c b/Utilities/cmzlib/uncompr.c new file mode 100644 index 0000000..08f8046 --- /dev/null +++ b/Utilities/cmzlib/uncompr.c @@ -0,0 +1,61 @@ +/* uncompr.c -- decompress a memory buffer + * Copyright (C) 1995-2002 Jean-loup Gailly. + * For conditions of distribution and use, see copyright notice in zlib.h + */ + +/* @(#) $Id$ */ + +#if defined(_MSC_VER) +#pragma warning ( disable : 4702 ) +#endif +#include "zlib.h" + +/* =========================================================================== + Decompresses the source buffer into the destination buffer. sourceLen is + the byte length of the source buffer. Upon entry, destLen is the total + size of the destination buffer, which must be large enough to hold the + entire uncompressed data. (The size of the uncompressed data must have + been saved previously by the compressor and transmitted to the decompressor + by some mechanism outside the scope of this compression library.) + Upon exit, destLen is the actual size of the compressed buffer. + This function can be used to decompress a whole file at once if the + input file is mmap'ed. + + uncompress returns Z_OK if success, Z_MEM_ERROR if there was not + enough memory, Z_BUF_ERROR if there was not enough room in the output + buffer, or Z_DATA_ERROR if the input data was corrupted. +*/ +int ZEXPORT uncompress (dest, destLen, source, sourceLen) + Bytef *dest; + uLongf *destLen; + const Bytef *source; + uLong sourceLen; +{ + z_stream stream; + int err; + + stream.next_in = (Bytef*)source; + stream.avail_in = (uInt)sourceLen; + /* Check for source > 64K on 16-bit machine: */ + if ((uLong)stream.avail_in != sourceLen) return Z_BUF_ERROR; + + stream.next_out = dest; + stream.avail_out = (uInt)*destLen; + if ((uLong)stream.avail_out != *destLen) return Z_BUF_ERROR; + + stream.zalloc = (alloc_func)0; + stream.zfree = (free_func)0; + + err = inflateInit(&stream); + if (err != Z_OK) return err; + + err = inflate(&stream, Z_FINISH); + if (err != Z_STREAM_END) { + inflateEnd(&stream); + return err == Z_OK ? Z_BUF_ERROR : err; + } + *destLen = stream.total_out; + + err = inflateEnd(&stream); + return err; +} diff --git a/Utilities/cmzlib/zconf.h b/Utilities/cmzlib/zconf.h new file mode 100644 index 0000000..187d135 --- /dev/null +++ b/Utilities/cmzlib/zconf.h @@ -0,0 +1,290 @@ +#include "cm_zlib_mangle.h" +/* zconf.h -- configuration of the zlib compression library + * Copyright (C) 1995-2002 Jean-loup Gailly. + * For conditions of distribution and use, see copyright notice in zlib.h + */ + +/* @(#) $Id$ */ + +#ifndef _ZCONF_H +#define _ZCONF_H + +/* + * If you *really* need a unique prefix for all types and library functions, + * compile with -DZ_PREFIX. The "standard" zlib should be compiled without it. + */ +#ifdef Z_PREFIX +# define deflateInit_ z_deflateInit_ +# define deflate z_deflate +# define deflateEnd z_deflateEnd +# define inflateInit_ z_inflateInit_ +# define inflate z_inflate +# define inflateEnd z_inflateEnd +# define deflateInit2_ z_deflateInit2_ +# define deflateSetDictionary z_deflateSetDictionary +# define deflateCopy z_deflateCopy +# define deflateReset z_deflateReset +# define deflateParams z_deflateParams +# define inflateInit2_ z_inflateInit2_ +# define inflateSetDictionary z_inflateSetDictionary +# define inflateSync z_inflateSync +# define inflateSyncPoint z_inflateSyncPoint +# define inflateReset z_inflateReset +# define compress z_compress +# define compress2 z_compress2 +# define uncompress z_uncompress +# define adler32 z_adler32 +# define crc32 z_crc32 +# define get_crc_table z_get_crc_table + +# define Byte z_Byte +# define uInt z_uInt +# define uLong z_uLong +# define Bytef z_Bytef +# define charf z_charf +# define intf z_intf +# define uIntf z_uIntf +# define uLongf z_uLongf +# define voidpf z_voidpf +# define voidp z_voidp +#endif + +#if (defined(_WIN32) || defined(__WIN32__)) && !defined(WIN32) +# define WIN32 +#endif +#if defined(__GNUC__) || defined(WIN32) || defined(__386__) || defined(i386) +# ifndef __32BIT__ +# define __32BIT__ +# endif +#endif +#if defined(__MSDOS__) && !defined(MSDOS) +# define MSDOS +#endif + +/* + * Compile with -DMAXSEG_64K if the alloc function cannot allocate more + * than 64k bytes at a time (needed on systems with 16-bit int). + */ +#if defined(MSDOS) && !defined(__32BIT__) +# define MAXSEG_64K +#endif +#ifdef MSDOS +# define UNALIGNED_OK +#endif + +#if (defined(MSDOS) || defined(_WINDOWS) || defined(WIN32)) && !defined(STDC) +# define STDC +#endif +#if defined(__STDC__) || defined(__cplusplus) || defined(__OS2__) +# ifndef STDC +# define STDC +# endif +#endif + +#ifndef STDC +# ifndef const /* cannot use !defined(STDC) && !defined(const) on Mac */ +# define const +# endif +#endif + +/* Some Mac compilers merge all .h files incorrectly: */ +#if defined(__MWERKS__) || defined(applec) ||defined(THINK_C) ||defined(__SC__) +# define NO_DUMMY_DECL +#endif + +/* Old Borland C incorrectly complains about missing returns: */ +#if defined(__BORLANDC__) && (__BORLANDC__ < 0x500) +# define NEED_DUMMY_RETURN +#endif + + +/* Maximum value for memLevel in deflateInit2 */ +#ifndef MAX_MEM_LEVEL +# ifdef MAXSEG_64K +# define MAX_MEM_LEVEL 8 +# else +# define MAX_MEM_LEVEL 9 +# endif +#endif + +/* Maximum value for windowBits in deflateInit2 and inflateInit2. + * WARNING: reducing MAX_WBITS makes minigzip unable to extract .gz files + * created by gzip. (Files created by minigzip can still be extracted by + * gzip.) + */ +#ifndef MAX_WBITS +# define MAX_WBITS 15 /* 32K LZ77 window */ +#endif + +/* The memory requirements for deflate are (in bytes): + (1 << (windowBits+2)) + (1 << (memLevel+9)) + that is: 128K for windowBits=15 + 128K for memLevel = 8 (default values) + plus a few kilobytes for small objects. For example, if you want to reduce + the default memory requirements from 256K to 128K, compile with + make CFLAGS="-O -DMAX_WBITS=14 -DMAX_MEM_LEVEL=7" + Of course this will generally degrade compression (there's no free lunch). + + The memory requirements for inflate are (in bytes) 1 << windowBits + that is, 32K for windowBits=15 (default value) plus a few kilobytes + for small objects. +*/ + + /* Type declarations */ + +#ifndef OF /* function prototypes */ +# ifdef STDC +# define OF(args) args +# else +# define OF(args) () +# endif +#endif + +/* The following definitions for FAR are needed only for MSDOS mixed + * model programming (small or medium model with some far allocations). + * This was tested only with MSC; for other MSDOS compilers you may have + * to define NO_MEMCPY in zutil.h. If you don't need the mixed model, + * just define FAR to be empty. + */ +#if (defined(M_I86SM) || defined(M_I86MM)) && !defined(__32BIT__) + /* MSC small or medium model */ +# define SMALL_MEDIUM +# ifdef _MSC_VER +# define FAR _far +# else +# define FAR far +# endif +#endif +#if defined(__BORLANDC__) && (defined(__SMALL__) || defined(__MEDIUM__)) +# ifndef __32BIT__ +# define SMALL_MEDIUM +# define FAR _far +# endif +#endif + +#include <cmzlib/zlibDllConfig.h> + +/* Compile with -DZLIB_DLL for Windows DLL support */ +#if defined(ZLIB_DLL) +# if defined(NOTUSED_WINDOWS) || defined(NOTUSEDWINDOWS) +# ifdef FAR +# undef FAR +# endif +# include <windows.h> +# define ZEXPORT WINAPI +# ifdef WIN32 +# define ZEXPORTVA WINAPIV +# else +# define ZEXPORTVA FAR _cdecl _export +# endif +# endif +# if defined (__BORLANDC__) +# if (__BORLANDC__ >= 0x0500) && defined (WIN32) +# include <windows.h> +# define ZEXPORT __declspec(dllexport) WINAPI +# define ZEXPORTRVA __declspec(dllexport) WINAPIV +# else +# if defined (_Windows) && defined (__DLL__) +# define ZEXPORT _export +# define ZEXPORTVA _export +# endif +# endif +# endif +#endif + +#if defined (__BEOS__) +# if defined (ZLIB_DLL) +# define ZEXTERN extern __declspec(dllexport) +# else +# define ZEXTERN extern __declspec(dllimport) +# endif +#endif + +#ifndef ZEXPORT +# define ZEXPORT +#endif +#ifndef ZEXPORTVA +# define ZEXPORTVA +#endif +#ifndef ZEXTERN +# define ZEXTERN extern +#endif + +#ifndef FAR +# define FAR +#endif + +#if !defined(MACOS) && !defined(TARGET_OS_MAC) +typedef unsigned char Byte; /* 8 bits */ +#endif +typedef unsigned int uInt; /* 16 bits or more */ +typedef unsigned long uLong; /* 32 bits or more */ + +#ifdef SMALL_MEDIUM + /* Borland C/C++ and some old MSC versions ignore FAR inside typedef */ +# define Bytef Byte FAR +#else + typedef Byte FAR Bytef; +#endif +typedef char FAR charf; +typedef int FAR intf; +typedef uInt FAR uIntf; +typedef uLong FAR uLongf; + +#ifdef STDC + typedef void FAR *voidpf; + typedef void *voidp; +#else + typedef Byte FAR *voidpf; + typedef Byte *voidp; +#endif + +#ifdef HAVE_UNISTD_H +# include <sys/types.h> /* for off_t */ +# include <unistd.h> /* for SEEK_* and off_t */ +# define z_off_t off_t +#endif +#ifndef SEEK_SET +# define SEEK_SET 0 /* Seek from beginning of file. */ +# define SEEK_CUR 1 /* Seek from current position. */ +# define SEEK_END 2 /* Set file pointer to EOF plus "offset" */ +#endif +#ifndef z_off_t +# define z_off_t long +#endif + +/* MVS linker does not support external names larger than 8 bytes */ +#if defined(__MVS__) +# pragma map(deflateInit_,"DEIN") +# pragma map(deflateInit2_,"DEIN2") +# pragma map(deflateEnd,"DEEND") +# pragma map(inflateInit_,"ININ") +# pragma map(inflateInit2_,"ININ2") +# pragma map(inflateEnd,"INEND") +# pragma map(inflateSync,"INSY") +# pragma map(inflateSetDictionary,"INSEDI") +# pragma map(inflate_blocks,"INBL") +# pragma map(inflate_blocks_new,"INBLNE") +# pragma map(inflate_blocks_free,"INBLFR") +# pragma map(inflate_blocks_reset,"INBLRE") +# pragma map(inflate_codes_free,"INCOFR") +# pragma map(inflate_codes,"INCO") +# pragma map(inflate_fast,"INFA") +# pragma map(inflate_flush,"INFLU") +# pragma map(inflate_mask,"INMA") +# pragma map(inflate_set_dictionary,"INSEDI2") +# pragma map(inflate_copyright,"INCOPY") +# pragma map(inflate_trees_bits,"INTRBI") +# pragma map(inflate_trees_dynamic,"INTRDY") +# pragma map(inflate_trees_fixed,"INTRFI") +# pragma map(inflate_trees_free,"INTRFR") +#endif + +#if defined(_MSC_VER) +#pragma warning ( disable : 4100 ) /* unreferenced variable */ +#pragma warning ( disable : 4127 ) /* cond expr is constant */ +#pragma warning ( disable : 4131 ) /* Old style declaration */ +#pragma warning ( disable : 4244 ) /* conversion loss of data */ +#pragma warning ( disable : 4267 ) +#endif + +#endif /* _ZCONF_H */ diff --git a/Utilities/cmzlib/zlib.def b/Utilities/cmzlib/zlib.def new file mode 100644 index 0000000..53899c6 --- /dev/null +++ b/Utilities/cmzlib/zlib.def @@ -0,0 +1,47 @@ + +VERSION 1.13 + +HEAPSIZE 1048576,4096 + +EXPORTS + cm_zlib_adler32 @1 + cm_zlib_compress @2 + cm_zlib_crc32 @3 + cm_zlib_deflate @4 + cm_zlib_deflateCopy @5 + cm_zlib_deflateEnd @6 + cm_zlib_deflateInit2_ @7 + cm_zlib_deflateInit_ @8 + cm_zlib_deflateParams @9 + cm_zlib_deflateReset @10 + cm_zlib_deflateSetDictionary @11 + cm_zlib_gzclose @12 + cm_zlib_gzdopen @13 + cm_zlib_gzerror @14 + cm_zlib_gzflush @15 + cm_zlib_gzopen @16 + cm_zlib_gzread @17 + cm_zlib_gzwrite @18 + cm_zlib_inflate @19 + cm_zlib_inflateEnd @20 + cm_zlib_inflateInit2_ @21 + cm_zlib_inflateInit_ @22 + cm_zlib_inflateReset @23 + cm_zlib_inflateSetDictionary @24 + cm_zlib_inflateSync @25 + cm_zlib_uncompress @26 + cm_zlib_zlibVersion @27 + cm_zlib_gzprintf @28 + cm_zlib_gzputc @29 + cm_zlib_gzgetc @30 + cm_zlib_gzseek @31 + cm_zlib_gzrewind @32 + cm_zlib_gztell @33 + cm_zlib_gzeof @34 + cm_zlib_gzsetparams @35 + cm_zlib_zError @36 + cm_zlib_inflateSyncPoint @37 + cm_zlib_get_crc_table @38 + cm_zlib_compress2 @39 + cm_zlib_gzputs @40 + cm_zlib_gzgets @41 diff --git a/Utilities/cmzlib/zlib.h b/Utilities/cmzlib/zlib.h new file mode 100644 index 0000000..63173d6 --- /dev/null +++ b/Utilities/cmzlib/zlib.h @@ -0,0 +1,893 @@ +/* zlib.h -- interface of the 'zlib' general purpose compression library + version 1.1.4, March 11th, 2002 + + Copyright (C) 1995-2002 Jean-loup Gailly and Mark Adler + + This software is provided 'as-is', without any express or implied + warranty. In no event will the authors be held liable for any damages + arising from the use of this software. + + Permission is granted to anyone to use this software for any purpose, + including commercial applications, and to alter it and redistribute it + freely, subject to the following restrictions: + + 1. The origin of this software must not be misrepresented; you must not + claim that you wrote the original software. If you use this software + in a product, an acknowledgment in the product documentation would be + appreciated but is not required. + 2. Altered source versions must be plainly marked as such, and must not be + misrepresented as being the original software. + 3. This notice may not be removed or altered from any source distribution. + + Jean-loup Gailly Mark Adler + jloup@gzip.org madler@alumni.caltech.edu + + + The data format used by the zlib library is described by RFCs (Request for + Comments) 1950 to 1952 in the files ftp://ds.internic.net/rfc/rfc1950.txt + (zlib format), rfc1951.txt (deflate format) and rfc1952.txt (gzip format). +*/ + +#ifndef _ZLIB_H +#define _ZLIB_H + +#include "cmzlib/zconf.h" + +#ifdef __cplusplus +extern "C" { +#endif + +#define ZLIB_VERSION "1.1.4" + +/* + The 'zlib' compression library provides in-memory compression and + decompression functions, including integrity checks of the uncompressed + data. This version of the library supports only one compression method + (deflation) but other algorithms will be added later and will have the same + stream interface. + + Compression can be done in a single step if the buffers are large + enough (for example if an input file is mmap'ed), or can be done by + repeated calls of the compression function. In the latter case, the + application must provide more input and/or consume the output + (providing more output space) before each call. + + The library also supports reading and writing files in gzip (.gz) format + with an interface similar to that of stdio. + + The library does not install any signal handler. The decoder checks + the consistency of the compressed data, so the library should never + crash even in case of corrupted input. +*/ + +typedef voidpf (*alloc_func) OF((voidpf opaque, uInt items, uInt size)); +typedef void (*free_func) OF((voidpf opaque, voidpf address)); + +struct internal_state; + +typedef struct z_stream_s { + Bytef *next_in; /* next input byte */ + uInt avail_in; /* number of bytes available at next_in */ + uLong total_in; /* total nb of input bytes read so far */ + + Bytef *next_out; /* next output byte should be put there */ + uInt avail_out; /* remaining free space at next_out */ + uLong total_out; /* total nb of bytes output so far */ + + char *msg; /* last error message, NULL if no error */ + struct internal_state FAR *state; /* not visible by applications */ + + alloc_func zalloc; /* used to allocate the internal state */ + free_func zfree; /* used to free the internal state */ + voidpf opaque; /* private data object passed to zalloc and zfree */ + + int data_type; /* best guess about the data type: ascii or binary */ + uLong adler; /* adler32 value of the uncompressed data */ + uLong reserved; /* reserved for future use */ +} z_stream; + +typedef z_stream FAR *z_streamp; + +/* + The application must update next_in and avail_in when avail_in has + dropped to zero. It must update next_out and avail_out when avail_out + has dropped to zero. The application must initialize zalloc, zfree and + opaque before calling the init function. All other fields are set by the + compression library and must not be updated by the application. + + The opaque value provided by the application will be passed as the first + parameter for calls of zalloc and zfree. This can be useful for custom + memory management. The compression library attaches no meaning to the + opaque value. + + zalloc must return Z_NULL if there is not enough memory for the object. + If zlib is used in a multi-threaded application, zalloc and zfree must be + thread safe. + + On 16-bit systems, the functions zalloc and zfree must be able to allocate + exactly 65536 bytes, but will not be required to allocate more than this + if the symbol MAXSEG_64K is defined (see zconf.h). WARNING: On MSDOS, + pointers returned by zalloc for objects of exactly 65536 bytes *must* + have their offset normalized to zero. The default allocation function + provided by this library ensures this (see zutil.c). To reduce memory + requirements and avoid any allocation of 64K objects, at the expense of + compression ratio, compile the library with -DMAX_WBITS=14 (see zconf.h). + + The fields total_in and total_out can be used for statistics or + progress reports. After compression, total_in holds the total size of + the uncompressed data and may be saved for use in the decompressor + (particularly if the decompressor wants to decompress everything in + a single step). +*/ + + /* constants */ + +#define Z_NO_FLUSH 0 +#define Z_PARTIAL_FLUSH 1 /* will be removed, use Z_SYNC_FLUSH instead */ +#define Z_SYNC_FLUSH 2 +#define Z_FULL_FLUSH 3 +#define Z_FINISH 4 +/* Allowed flush values; see deflate() below for details */ + +#define Z_OK 0 +#define Z_STREAM_END 1 +#define Z_NEED_DICT 2 +#define Z_ERRNO (-1) +#define Z_STREAM_ERROR (-2) +#define Z_DATA_ERROR (-3) +#define Z_MEM_ERROR (-4) +#define Z_BUF_ERROR (-5) +#define Z_VERSION_ERROR (-6) +/* Return codes for the compression/decompression functions. Negative + * values are errors, positive values are used for special but normal events. + */ + +#define Z_NO_COMPRESSION 0 +#define Z_BEST_SPEED 1 +#define Z_BEST_COMPRESSION 9 +#define Z_DEFAULT_COMPRESSION (-1) +/* compression levels */ + +#define Z_FILTERED 1 +#define Z_HUFFMAN_ONLY 2 +#define Z_DEFAULT_STRATEGY 0 +/* compression strategy; see deflateInit2() below for details */ + +#define Z_BINARY 0 +#define Z_ASCII 1 +#define Z_UNKNOWN 2 +/* Possible values of the data_type field */ + +#define Z_DEFLATED 8 +/* The deflate compression method (the only one supported in this version) */ + +#define Z_NULL 0 /* for initializing zalloc, zfree, opaque */ + +#define zlib_version zlibVersion() +/* for compatibility with versions < 1.0.2 */ + + /* basic functions */ + +ZEXTERN const char * ZEXPORT zlibVersion OF((void)); +/* The application can compare zlibVersion and ZLIB_VERSION for consistency. + If the first character differs, the library code actually used is + not compatible with the zlib.h header file used by the application. + This check is automatically made by deflateInit and inflateInit. + */ + +/* +ZEXTERN int ZEXPORT deflateInit OF((z_streamp strm, int level)); + + Initializes the internal stream state for compression. The fields + zalloc, zfree and opaque must be initialized before by the caller. + If zalloc and zfree are set to Z_NULL, deflateInit updates them to + use default allocation functions. + + The compression level must be Z_DEFAULT_COMPRESSION, or between 0 and 9: + 1 gives best speed, 9 gives best compression, 0 gives no compression at + all (the input data is simply copied a block at a time). + Z_DEFAULT_COMPRESSION requests a default compromise between speed and + compression (currently equivalent to level 6). + + deflateInit returns Z_OK if success, Z_MEM_ERROR if there was not + enough memory, Z_STREAM_ERROR if level is not a valid compression level, + Z_VERSION_ERROR if the zlib library version (zlib_version) is incompatible + with the version assumed by the caller (ZLIB_VERSION). + msg is set to null if there is no error message. deflateInit does not + perform any compression: this will be done by deflate(). +*/ + + +ZEXTERN int ZEXPORT deflate OF((z_streamp strm, int flush)); +/* + deflate compresses as much data as possible, and stops when the input + buffer becomes empty or the output buffer becomes full. It may introduce some + output latency (reading input without producing any output) except when + forced to flush. + + The detailed semantics are as follows. deflate performs one or both of the + following actions: + + - Compress more input starting at next_in and update next_in and avail_in + accordingly. If not all input can be processed (because there is not + enough room in the output buffer), next_in and avail_in are updated and + processing will resume at this point for the next call of deflate(). + + - Provide more output starting at next_out and update next_out and avail_out + accordingly. This action is forced if the parameter flush is non zero. + Forcing flush frequently degrades the compression ratio, so this parameter + should be set only when necessary (in interactive applications). + Some output may be provided even if flush is not set. + + Before the call of deflate(), the application should ensure that at least + one of the actions is possible, by providing more input and/or consuming + more output, and updating avail_in or avail_out accordingly; avail_out + should never be zero before the call. The application can consume the + compressed output when it wants, for example when the output buffer is full + (avail_out == 0), or after each call of deflate(). If deflate returns Z_OK + and with zero avail_out, it must be called again after making room in the + output buffer because there might be more output pending. + + If the parameter flush is set to Z_SYNC_FLUSH, all pending output is + flushed to the output buffer and the output is aligned on a byte boundary, so + that the decompressor can get all input data available so far. (In particular + avail_in is zero after the call if enough output space has been provided + before the call.) Flushing may degrade compression for some compression + algorithms and so it should be used only when necessary. + + If flush is set to Z_FULL_FLUSH, all output is flushed as with + Z_SYNC_FLUSH, and the compression state is reset so that decompression can + restart from this point if previous compressed data has been damaged or if + random access is desired. Using Z_FULL_FLUSH too often can seriously degrade + the compression. + + If deflate returns with avail_out == 0, this function must be called again + with the same value of the flush parameter and more output space (updated + avail_out), until the flush is complete (deflate returns with non-zero + avail_out). + + If the parameter flush is set to Z_FINISH, pending input is processed, + pending output is flushed and deflate returns with Z_STREAM_END if there + was enough output space; if deflate returns with Z_OK, this function must be + called again with Z_FINISH and more output space (updated avail_out) but no + more input data, until it returns with Z_STREAM_END or an error. After + deflate has returned Z_STREAM_END, the only possible operations on the + stream are deflateReset or deflateEnd. + + Z_FINISH can be used immediately after deflateInit if all the compression + is to be done in a single step. In this case, avail_out must be at least + 0.1% larger than avail_in plus 12 bytes. If deflate does not return + Z_STREAM_END, then it must be called again as described above. + + deflate() sets strm->adler to the adler32 checksum of all input read + so far (that is, total_in bytes). + + deflate() may update data_type if it can make a good guess about + the input data type (Z_ASCII or Z_BINARY). In doubt, the data is considered + binary. This field is only for information purposes and does not affect + the compression algorithm in any manner. + + deflate() returns Z_OK if some progress has been made (more input + processed or more output produced), Z_STREAM_END if all input has been + consumed and all output has been produced (only when flush is set to + Z_FINISH), Z_STREAM_ERROR if the stream state was inconsistent (for example + if next_in or next_out was NULL), Z_BUF_ERROR if no progress is possible + (for example avail_in or avail_out was zero). +*/ + + +ZEXTERN int ZEXPORT deflateEnd OF((z_streamp strm)); +/* + All dynamically allocated data structures for this stream are freed. + This function discards any unprocessed input and does not flush any + pending output. + + deflateEnd returns Z_OK if success, Z_STREAM_ERROR if the + stream state was inconsistent, Z_DATA_ERROR if the stream was freed + prematurely (some input or output was discarded). In the error case, + msg may be set but then points to a static string (which must not be + deallocated). +*/ + + +/* +ZEXTERN int ZEXPORT inflateInit OF((z_streamp strm)); + + Initializes the internal stream state for decompression. The fields + next_in, avail_in, zalloc, zfree and opaque must be initialized before by + the caller. If next_in is not Z_NULL and avail_in is large enough (the exact + value depends on the compression method), inflateInit determines the + compression method from the zlib header and allocates all data structures + accordingly; otherwise the allocation will be deferred to the first call of + inflate. If zalloc and zfree are set to Z_NULL, inflateInit updates them to + use default allocation functions. + + inflateInit returns Z_OK if success, Z_MEM_ERROR if there was not enough + memory, Z_VERSION_ERROR if the zlib library version is incompatible with the + version assumed by the caller. msg is set to null if there is no error + message. inflateInit does not perform any decompression apart from reading + the zlib header if present: this will be done by inflate(). (So next_in and + avail_in may be modified, but next_out and avail_out are unchanged.) +*/ + + +ZEXTERN int ZEXPORT inflate OF((z_streamp strm, int flush)); +/* + inflate decompresses as much data as possible, and stops when the input + buffer becomes empty or the output buffer becomes full. It may some + introduce some output latency (reading input without producing any output) + except when forced to flush. + + The detailed semantics are as follows. inflate performs one or both of the + following actions: + + - Decompress more input starting at next_in and update next_in and avail_in + accordingly. If not all input can be processed (because there is not + enough room in the output buffer), next_in is updated and processing + will resume at this point for the next call of inflate(). + + - Provide more output starting at next_out and update next_out and avail_out + accordingly. inflate() provides as much output as possible, until there + is no more input data or no more space in the output buffer (see below + about the flush parameter). + + Before the call of inflate(), the application should ensure that at least + one of the actions is possible, by providing more input and/or consuming + more output, and updating the next_* and avail_* values accordingly. + The application can consume the uncompressed output when it wants, for + example when the output buffer is full (avail_out == 0), or after each + call of inflate(). If inflate returns Z_OK and with zero avail_out, it + must be called again after making room in the output buffer because there + might be more output pending. + + If the parameter flush is set to Z_SYNC_FLUSH, inflate flushes as much + output as possible to the output buffer. The flushing behavior of inflate is + not specified for values of the flush parameter other than Z_SYNC_FLUSH + and Z_FINISH, but the current implementation actually flushes as much output + as possible anyway. + + inflate() should normally be called until it returns Z_STREAM_END or an + error. However if all decompression is to be performed in a single step + (a single call of inflate), the parameter flush should be set to + Z_FINISH. In this case all pending input is processed and all pending + output is flushed; avail_out must be large enough to hold all the + uncompressed data. (The size of the uncompressed data may have been saved + by the compressor for this purpose.) The next operation on this stream must + be inflateEnd to deallocate the decompression state. The use of Z_FINISH + is never required, but can be used to inform inflate that a faster routine + may be used for the single inflate() call. + + If a preset dictionary is needed at this point (see inflateSetDictionary + below), inflate sets strm-adler to the adler32 checksum of the + dictionary chosen by the compressor and returns Z_NEED_DICT; otherwise + it sets strm->adler to the adler32 checksum of all output produced + so far (that is, total_out bytes) and returns Z_OK, Z_STREAM_END or + an error code as described below. At the end of the stream, inflate() + checks that its computed adler32 checksum is equal to that saved by the + compressor and returns Z_STREAM_END only if the checksum is correct. + + inflate() returns Z_OK if some progress has been made (more input processed + or more output produced), Z_STREAM_END if the end of the compressed data has + been reached and all uncompressed output has been produced, Z_NEED_DICT if a + preset dictionary is needed at this point, Z_DATA_ERROR if the input data was + corrupted (input stream not conforming to the zlib format or incorrect + adler32 checksum), Z_STREAM_ERROR if the stream structure was inconsistent + (for example if next_in or next_out was NULL), Z_MEM_ERROR if there was not + enough memory, Z_BUF_ERROR if no progress is possible or if there was not + enough room in the output buffer when Z_FINISH is used. In the Z_DATA_ERROR + case, the application may then call inflateSync to look for a good + compression block. +*/ + + +ZEXTERN int ZEXPORT inflateEnd OF((z_streamp strm)); +/* + All dynamically allocated data structures for this stream are freed. + This function discards any unprocessed input and does not flush any + pending output. + + inflateEnd returns Z_OK if success, Z_STREAM_ERROR if the stream state + was inconsistent. In the error case, msg may be set but then points to a + static string (which must not be deallocated). +*/ + + /* Advanced functions */ + +/* + The following functions are needed only in some special applications. +*/ + +/* +ZEXTERN int ZEXPORT deflateInit2 OF((z_streamp strm, + int level, + int method, + int windowBits, + int memLevel, + int strategy)); + + This is another version of deflateInit with more compression options. The + fields next_in, zalloc, zfree and opaque must be initialized before by + the caller. + + The method parameter is the compression method. It must be Z_DEFLATED in + this version of the library. + + The windowBits parameter is the base two logarithm of the window size + (the size of the history buffer). It should be in the range 8..15 for this + version of the library. Larger values of this parameter result in better + compression at the expense of memory usage. The default value is 15 if + deflateInit is used instead. + + The memLevel parameter specifies how much memory should be allocated + for the internal compression state. memLevel=1 uses minimum memory but + is slow and reduces compression ratio; memLevel=9 uses maximum memory + for optimal speed. The default value is 8. See zconf.h for total memory + usage as a function of windowBits and memLevel. + + The strategy parameter is used to tune the compression algorithm. Use the + value Z_DEFAULT_STRATEGY for normal data, Z_FILTERED for data produced by a + filter (or predictor), or Z_HUFFMAN_ONLY to force Huffman encoding only (no + string match). Filtered data consists mostly of small values with a + somewhat random distribution. In this case, the compression algorithm is + tuned to compress them better. The effect of Z_FILTERED is to force more + Huffman coding and less string matching; it is somewhat intermediate + between Z_DEFAULT and Z_HUFFMAN_ONLY. The strategy parameter only affects + the compression ratio but not the correctness of the compressed output even + if it is not set appropriately. + + deflateInit2 returns Z_OK if success, Z_MEM_ERROR if there was not enough + memory, Z_STREAM_ERROR if a parameter is invalid (such as an invalid + method). msg is set to null if there is no error message. deflateInit2 does + not perform any compression: this will be done by deflate(). +*/ + +ZEXTERN int ZEXPORT deflateSetDictionary OF((z_streamp strm, + const Bytef *dictionary, + uInt dictLength)); +/* + Initializes the compression dictionary from the given byte sequence + without producing any compressed output. This function must be called + immediately after deflateInit, deflateInit2 or deflateReset, before any + call of deflate. The compressor and decompressor must use exactly the same + dictionary (see inflateSetDictionary). + + The dictionary should consist of strings (byte sequences) that are likely + to be encountered later in the data to be compressed, with the most commonly + used strings preferably put towards the end of the dictionary. Using a + dictionary is most useful when the data to be compressed is short and can be + predicted with good accuracy; the data can then be compressed better than + with the default empty dictionary. + + Depending on the size of the compression data structures selected by + deflateInit or deflateInit2, a part of the dictionary may in effect be + discarded, for example if the dictionary is larger than the window size in + deflate or deflate2. Thus the strings most likely to be useful should be + put at the end of the dictionary, not at the front. + + Upon return of this function, strm->adler is set to the Adler32 value + of the dictionary; the decompressor may later use this value to determine + which dictionary has been used by the compressor. (The Adler32 value + applies to the whole dictionary even if only a subset of the dictionary is + actually used by the compressor.) + + deflateSetDictionary returns Z_OK if success, or Z_STREAM_ERROR if a + parameter is invalid (such as NULL dictionary) or the stream state is + inconsistent (for example if deflate has already been called for this stream + or if the compression method is bsort). deflateSetDictionary does not + perform any compression: this will be done by deflate(). +*/ + +ZEXTERN int ZEXPORT deflateCopy OF((z_streamp dest, + z_streamp source)); +/* + Sets the destination stream as a complete copy of the source stream. + + This function can be useful when several compression strategies will be + tried, for example when there are several ways of pre-processing the input + data with a filter. The streams that will be discarded should then be freed + by calling deflateEnd. Note that deflateCopy duplicates the internal + compression state which can be quite large, so this strategy is slow and + can consume lots of memory. + + deflateCopy returns Z_OK if success, Z_MEM_ERROR if there was not + enough memory, Z_STREAM_ERROR if the source stream state was inconsistent + (such as zalloc being NULL). msg is left unchanged in both source and + destination. +*/ + +ZEXTERN int ZEXPORT deflateReset OF((z_streamp strm)); +/* + This function is equivalent to deflateEnd followed by deflateInit, + but does not free and reallocate all the internal compression state. + The stream will keep the same compression level and any other attributes + that may have been set by deflateInit2. + + deflateReset returns Z_OK if success, or Z_STREAM_ERROR if the source + stream state was inconsistent (such as zalloc or state being NULL). +*/ + +ZEXTERN int ZEXPORT deflateParams OF((z_streamp strm, + int level, + int strategy)); +/* + Dynamically update the compression level and compression strategy. The + interpretation of level and strategy is as in deflateInit2. This can be + used to switch between compression and straight copy of the input data, or + to switch to a different kind of input data requiring a different + strategy. If the compression level is changed, the input available so far + is compressed with the old level (and may be flushed); the new level will + take effect only at the next call of deflate(). + + Before the call of deflateParams, the stream state must be set as for + a call of deflate(), since the currently available input may have to + be compressed and flushed. In particular, strm->avail_out must be non-zero. + + deflateParams returns Z_OK if success, Z_STREAM_ERROR if the source + stream state was inconsistent or if a parameter was invalid, Z_BUF_ERROR + if strm->avail_out was zero. +*/ + +/* +ZEXTERN int ZEXPORT inflateInit2 OF((z_streamp strm, + int windowBits)); + + This is another version of inflateInit with an extra parameter. The + fields next_in, avail_in, zalloc, zfree and opaque must be initialized + before by the caller. + + The windowBits parameter is the base two logarithm of the maximum window + size (the size of the history buffer). It should be in the range 8..15 for + this version of the library. The default value is 15 if inflateInit is used + instead. If a compressed stream with a larger window size is given as + input, inflate() will return with the error code Z_DATA_ERROR instead of + trying to allocate a larger window. + + inflateInit2 returns Z_OK if success, Z_MEM_ERROR if there was not enough + memory, Z_STREAM_ERROR if a parameter is invalid (such as a negative + memLevel). msg is set to null if there is no error message. inflateInit2 + does not perform any decompression apart from reading the zlib header if + present: this will be done by inflate(). (So next_in and avail_in may be + modified, but next_out and avail_out are unchanged.) +*/ + +ZEXTERN int ZEXPORT inflateSetDictionary OF((z_streamp strm, + const Bytef *dictionary, + uInt dictLength)); +/* + Initializes the decompression dictionary from the given uncompressed byte + sequence. This function must be called immediately after a call of inflate + if this call returned Z_NEED_DICT. The dictionary chosen by the compressor + can be determined from the Adler32 value returned by this call of + inflate. The compressor and decompressor must use exactly the same + dictionary (see deflateSetDictionary). + + inflateSetDictionary returns Z_OK if success, Z_STREAM_ERROR if a + parameter is invalid (such as NULL dictionary) or the stream state is + inconsistent, Z_DATA_ERROR if the given dictionary doesn't match the + expected one (incorrect Adler32 value). inflateSetDictionary does not + perform any decompression: this will be done by subsequent calls of + inflate(). +*/ + +ZEXTERN int ZEXPORT inflateSync OF((z_streamp strm)); +/* + Skips invalid compressed data until a full flush point (see above the + description of deflate with Z_FULL_FLUSH) can be found, or until all + available input is skipped. No output is provided. + + inflateSync returns Z_OK if a full flush point has been found, Z_BUF_ERROR + if no more input was provided, Z_DATA_ERROR if no flush point has been found, + or Z_STREAM_ERROR if the stream structure was inconsistent. In the success + case, the application may save the current current value of total_in which + indicates where valid compressed data was found. In the error case, the + application may repeatedly call inflateSync, providing more input each time, + until success or end of the input data. +*/ + +ZEXTERN int ZEXPORT inflateReset OF((z_streamp strm)); +/* + This function is equivalent to inflateEnd followed by inflateInit, + but does not free and reallocate all the internal decompression state. + The stream will keep attributes that may have been set by inflateInit2. + + inflateReset returns Z_OK if success, or Z_STREAM_ERROR if the source + stream state was inconsistent (such as zalloc or state being NULL). +*/ + + + /* utility functions */ + +/* + The following utility functions are implemented on top of the + basic stream-oriented functions. To simplify the interface, some + default options are assumed (compression level and memory usage, + standard memory allocation functions). The source code of these + utility functions can easily be modified if you need special options. +*/ + +ZEXTERN int ZEXPORT compress OF((Bytef *dest, uLongf *destLen, + const Bytef *source, uLong sourceLen)); +/* + Compresses the source buffer into the destination buffer. sourceLen is + the byte length of the source buffer. Upon entry, destLen is the total + size of the destination buffer, which must be at least 0.1% larger than + sourceLen plus 12 bytes. Upon exit, destLen is the actual size of the + compressed buffer. + This function can be used to compress a whole file at once if the + input file is mmap'ed. + compress returns Z_OK if success, Z_MEM_ERROR if there was not + enough memory, Z_BUF_ERROR if there was not enough room in the output + buffer. +*/ + +ZEXTERN int ZEXPORT compress2 OF((Bytef *dest, uLongf *destLen, + const Bytef *source, uLong sourceLen, + int level)); +/* + Compresses the source buffer into the destination buffer. The level + parameter has the same meaning as in deflateInit. sourceLen is the byte + length of the source buffer. Upon entry, destLen is the total size of the + destination buffer, which must be at least 0.1% larger than sourceLen plus + 12 bytes. Upon exit, destLen is the actual size of the compressed buffer. + + compress2 returns Z_OK if success, Z_MEM_ERROR if there was not enough + memory, Z_BUF_ERROR if there was not enough room in the output buffer, + Z_STREAM_ERROR if the level parameter is invalid. +*/ + +ZEXTERN int ZEXPORT uncompress OF((Bytef *dest, uLongf *destLen, + const Bytef *source, uLong sourceLen)); +/* + Decompresses the source buffer into the destination buffer. sourceLen is + the byte length of the source buffer. Upon entry, destLen is the total + size of the destination buffer, which must be large enough to hold the + entire uncompressed data. (The size of the uncompressed data must have + been saved previously by the compressor and transmitted to the decompressor + by some mechanism outside the scope of this compression library.) + Upon exit, destLen is the actual size of the compressed buffer. + This function can be used to decompress a whole file at once if the + input file is mmap'ed. + + uncompress returns Z_OK if success, Z_MEM_ERROR if there was not + enough memory, Z_BUF_ERROR if there was not enough room in the output + buffer, or Z_DATA_ERROR if the input data was corrupted. +*/ + + +typedef voidp gzFile; + +ZEXTERN gzFile ZEXPORT gzopen OF((const char *path, const char *mode)); +/* + Opens a gzip (.gz) file for reading or writing. The mode parameter + is as in fopen ("rb" or "wb") but can also include a compression level + ("wb9") or a strategy: 'f' for filtered data as in "wb6f", 'h' for + Huffman only compression as in "wb1h". (See the description + of deflateInit2 for more information about the strategy parameter.) + + gzopen can be used to read a file which is not in gzip format; in this + case gzread will directly read from the file without decompression. + + gzopen returns NULL if the file could not be opened or if there was + insufficient memory to allocate the (de)compression state; errno + can be checked to distinguish the two cases (if errno is zero, the + zlib error is Z_MEM_ERROR). */ + +ZEXTERN gzFile ZEXPORT gzdopen OF((int fd, const char *mode)); +/* + gzdopen() associates a gzFile with the file descriptor fd. File + descriptors are obtained from calls like open, dup, creat, pipe or + fileno (in the file has been previously opened with fopen). + The mode parameter is as in gzopen. + The next call of gzclose on the returned gzFile will also close the + file descriptor fd, just like fclose(fdopen(fd), mode) closes the file + descriptor fd. If you want to keep fd open, use gzdopen(dup(fd), mode). + gzdopen returns NULL if there was insufficient memory to allocate + the (de)compression state. +*/ + +ZEXTERN int ZEXPORT gzsetparams OF((gzFile file, int level, int strategy)); +/* + Dynamically update the compression level or strategy. See the description + of deflateInit2 for the meaning of these parameters. + gzsetparams returns Z_OK if success, or Z_STREAM_ERROR if the file was not + opened for writing. +*/ + +ZEXTERN int ZEXPORT gzread OF((gzFile file, voidp buf, unsigned len)); +/* + Reads the given number of uncompressed bytes from the compressed file. + If the input file was not in gzip format, gzread copies the given number + of bytes into the buffer. + gzread returns the number of uncompressed bytes actually read (0 for + end of file, -1 for error). */ + +ZEXTERN int ZEXPORT gzwrite OF((gzFile file, + const voidp buf, unsigned len)); +/* + Writes the given number of uncompressed bytes into the compressed file. + gzwrite returns the number of uncompressed bytes actually written + (0 in case of error). +*/ + +ZEXTERN int ZEXPORTVA gzprintf OF((gzFile file, const char *format, ...)); +/* + Converts, formats, and writes the args to the compressed file under + control of the format string, as in fprintf. gzprintf returns the number of + uncompressed bytes actually written (0 in case of error). +*/ + +ZEXTERN int ZEXPORT gzputs OF((gzFile file, const char *s)); +/* + Writes the given null-terminated string to the compressed file, excluding + the terminating null character. + gzputs returns the number of characters written, or -1 in case of error. +*/ + +ZEXTERN char * ZEXPORT gzgets OF((gzFile file, char *buf, int len)); +/* + Reads bytes from the compressed file until len-1 characters are read, or + a newline character is read and transferred to buf, or an end-of-file + condition is encountered. The string is then terminated with a null + character. + gzgets returns buf, or Z_NULL in case of error. +*/ + +ZEXTERN int ZEXPORT gzputc OF((gzFile file, int c)); +/* + Writes c, converted to an unsigned char, into the compressed file. + gzputc returns the value that was written, or -1 in case of error. +*/ + +ZEXTERN int ZEXPORT gzgetc OF((gzFile file)); +/* + Reads one byte from the compressed file. gzgetc returns this byte + or -1 in case of end of file or error. +*/ + +ZEXTERN int ZEXPORT gzflush OF((gzFile file, int flush)); +/* + Flushes all pending output into the compressed file. The parameter + flush is as in the deflate() function. The return value is the zlib + error number (see function gzerror below). gzflush returns Z_OK if + the flush parameter is Z_FINISH and all output could be flushed. + gzflush should be called only when strictly necessary because it can + degrade compression. +*/ + +ZEXTERN z_off_t ZEXPORT gzseek OF((gzFile file, + z_off_t offset, int whence)); +/* + Sets the starting position for the next gzread or gzwrite on the + given compressed file. The offset represents a number of bytes in the + uncompressed data stream. The whence parameter is defined as in lseek(2); + the value SEEK_END is not supported. + If the file is opened for reading, this function is emulated but can be + extremely slow. If the file is opened for writing, only forward seeks are + supported; gzseek then compresses a sequence of zeroes up to the new + starting position. + + gzseek returns the resulting offset location as measured in bytes from + the beginning of the uncompressed stream, or -1 in case of error, in + particular if the file is opened for writing and the new starting position + would be before the current position. +*/ + +ZEXTERN int ZEXPORT gzrewind OF((gzFile file)); +/* + Rewinds the given file. This function is supported only for reading. + + gzrewind(file) is equivalent to (int)gzseek(file, 0L, SEEK_SET) +*/ + +ZEXTERN z_off_t ZEXPORT gztell OF((gzFile file)); +/* + Returns the starting position for the next gzread or gzwrite on the + given compressed file. This position represents a number of bytes in the + uncompressed data stream. + + gztell(file) is equivalent to gzseek(file, 0L, SEEK_CUR) +*/ + +ZEXTERN int ZEXPORT gzeof OF((gzFile file)); +/* + Returns 1 when EOF has previously been detected reading the given + input stream, otherwise zero. +*/ + +ZEXTERN int ZEXPORT gzclose OF((gzFile file)); +/* + Flushes all pending output if necessary, closes the compressed file + and deallocates all the (de)compression state. The return value is the zlib + error number (see function gzerror below). +*/ + +ZEXTERN const char * ZEXPORT gzerror OF((gzFile file, int *errnum)); +/* + Returns the error message for the last error which occurred on the + given compressed file. errnum is set to zlib error number. If an + error occurred in the file system and not in the compression library, + errnum is set to Z_ERRNO and the application may consult errno + to get the exact error code. +*/ + + /* checksum functions */ + +/* + These functions are not related to compression but are exported + anyway because they might be useful in applications using the + compression library. +*/ + +ZEXTERN uLong ZEXPORT adler32 OF((uLong adler, const Bytef *buf, uInt len)); + +/* + Update a running Adler-32 checksum with the bytes buf[0..len-1] and + return the updated checksum. If buf is NULL, this function returns + the required initial value for the checksum. + An Adler-32 checksum is almost as reliable as a CRC32 but can be computed + much faster. Usage example: + + uLong adler = adler32(0L, Z_NULL, 0); + + while (read_buffer(buffer, length) != EOF) { + adler = adler32(adler, buffer, length); + } + if (adler != original_adler) error(); +*/ + +ZEXTERN uLong ZEXPORT crc32 OF((uLong crc, const Bytef *buf, uInt len)); +/* + Update a running crc with the bytes buf[0..len-1] and return the updated + crc. If buf is NULL, this function returns the required initial value + for the crc. Pre- and post-conditioning (one's complement) is performed + within this function so it shouldn't be done by the application. + Usage example: + + uLong crc = crc32(0L, Z_NULL, 0); + + while (read_buffer(buffer, length) != EOF) { + crc = crc32(crc, buffer, length); + } + if (crc != original_crc) error(); +*/ + + + /* various hacks, don't look :) */ + +/* deflateInit and inflateInit are macros to allow checking the zlib version + * and the compiler's view of z_stream: + */ +ZEXTERN int ZEXPORT deflateInit_ OF((z_streamp strm, int level, + const char *version, int stream_size)); +ZEXTERN int ZEXPORT inflateInit_ OF((z_streamp strm, + const char *version, int stream_size)); +ZEXTERN int ZEXPORT deflateInit2_ OF((z_streamp strm, int level, int method, + int windowBits, int memLevel, + int strategy, const char *version, + int stream_size)); +ZEXTERN int ZEXPORT inflateInit2_ OF((z_streamp strm, int windowBits, + const char *version, int stream_size)); +#define deflateInit(strm, level) \ + deflateInit_((strm), (level), ZLIB_VERSION, sizeof(z_stream)) +#define inflateInit(strm) \ + inflateInit_((strm), ZLIB_VERSION, sizeof(z_stream)) +#define deflateInit2(strm, level, method, windowBits, memLevel, strategy) \ + deflateInit2_((strm),(level),(method),(windowBits),(memLevel),\ + (strategy), ZLIB_VERSION, sizeof(z_stream)) +#define inflateInit2(strm, windowBits) \ + inflateInit2_((strm), (windowBits), ZLIB_VERSION, sizeof(z_stream)) + + +#if !defined(_Z_UTIL_H) && !defined(NO_DUMMY_DECL) + struct internal_state {int dummy;}; /* hack for buggy compilers */ +#endif + +ZEXTERN const char * ZEXPORT zError OF((int err)); +ZEXTERN int ZEXPORT inflateSyncPoint OF((z_streamp z)); +ZEXTERN const uLongf * ZEXPORT get_crc_table OF((void)); + +#ifdef __cplusplus +} +#endif + +#endif /* _ZLIB_H */ diff --git a/Utilities/cmzlib/zlib.rc b/Utilities/cmzlib/zlib.rc new file mode 100644 index 0000000..556d4ff --- /dev/null +++ b/Utilities/cmzlib/zlib.rc @@ -0,0 +1,32 @@ +#include <windows.h> + +#define IDR_VERSION1 1 +IDR_VERSION1 VERSIONINFO MOVEABLE IMPURE LOADONCALL DISCARDABLE + FILEVERSION 1,1,3,0 + PRODUCTVERSION 1,1,3,0 + FILEFLAGSMASK VS_FFI_FILEFLAGSMASK + FILEFLAGS 0 + FILEOS VOS_DOS_WINDOWS32 + FILETYPE VFT_DLL + FILESUBTYPE 0 // not used +BEGIN + BLOCK "StringFileInfo" + BEGIN + BLOCK "040904E4" + //language ID = U.S. English, char set = Windows, Multilingual + + BEGIN + VALUE "FileDescription", "zlib data compression library\0" + VALUE "FileVersion", "1.1.3\0" + VALUE "InternalName", "zlib\0" + VALUE "OriginalFilename", "zlib.dll\0" + VALUE "ProductName", "ZLib.DLL\0" + VALUE "Comments","DLL support by Alessandro Iacopetti & Gilles Vollant\0" + VALUE "LegalCopyright", "(C) 1995-1998 Jean-loup Gailly & Mark Adler\0" + END + END + BLOCK "VarFileInfo" + BEGIN + VALUE "Translation", 0x0409, 1252 + END +END diff --git a/Utilities/cmzlib/zlibDllConfig.h.in b/Utilities/cmzlib/zlibDllConfig.h.in new file mode 100644 index 0000000..3dceb8c --- /dev/null +++ b/Utilities/cmzlib/zlibDllConfig.h.in @@ -0,0 +1,6 @@ +#ifndef _zlibDllConfig_h +#define _zlibDllConfig_h + +#cmakedefine ZLIB_DLL + +#endif diff --git a/Utilities/cmzlib/zutil.c b/Utilities/cmzlib/zutil.c new file mode 100644 index 0000000..dfc38ec --- /dev/null +++ b/Utilities/cmzlib/zutil.c @@ -0,0 +1,225 @@ +/* zutil.c -- target dependent utility functions for the compression library + * Copyright (C) 1995-2002 Jean-loup Gailly. + * For conditions of distribution and use, see copyright notice in zlib.h + */ + +/* @(#) $Id$ */ + +#include "zutil.h" + +struct internal_state {int dummy;}; /* for buggy compilers */ + +#ifndef STDC +extern void exit OF((int)); +#endif + +const char *z_errmsg[10] = { +"need dictionary", /* Z_NEED_DICT 2 */ +"stream end", /* Z_STREAM_END 1 */ +"", /* Z_OK 0 */ +"file error", /* Z_ERRNO (-1) */ +"stream error", /* Z_STREAM_ERROR (-2) */ +"data error", /* Z_DATA_ERROR (-3) */ +"insufficient memory", /* Z_MEM_ERROR (-4) */ +"buffer error", /* Z_BUF_ERROR (-5) */ +"incompatible version",/* Z_VERSION_ERROR (-6) */ +""}; + + +const char * ZEXPORT zlibVersion() +{ + return ZLIB_VERSION; +} + +#ifdef DEBUG + +# ifndef verbose +# define verbose 0 +# endif +int z_verbose = verbose; + +void z_error (m) + char *m; +{ + fprintf(stderr, "%s\n", m); + exit(1); +} +#endif + +/* exported to allow conversion of error code to string for compress() and + * uncompress() + */ +const char * ZEXPORT zError(err) + int err; +{ + return ERR_MSG(err); +} + + +#ifndef HAVE_MEMCPY + +void zmemcpy(dest, source, len) + Bytef* dest; + const Bytef* source; + uInt len; +{ + if (len == 0) return; + do { + *dest++ = *source++; /* ??? to be unrolled */ + } while (--len != 0); +} + +int zmemcmp(s1, s2, len) + const Bytef* s1; + const Bytef* s2; + uInt len; +{ + uInt j; + + for (j = 0; j < len; j++) { + if (s1[j] != s2[j]) return 2*(s1[j] > s2[j])-1; + } + return 0; +} + +void zmemzero(dest, len) + Bytef* dest; + uInt len; +{ + if (len == 0) return; + do { + *dest++ = 0; /* ??? to be unrolled */ + } while (--len != 0); +} +#endif + +#ifdef __TURBOC__ +#if (defined( __BORLANDC__) || !defined(SMALL_MEDIUM)) && !defined(__32BIT__) +/* Small and medium model in Turbo C are for now limited to near allocation + * with reduced MAX_WBITS and MAX_MEM_LEVEL + */ +# define MY_ZCALLOC + +/* Turbo C malloc() does not allow dynamic allocation of 64K bytes + * and farmalloc(64K) returns a pointer with an offset of 8, so we + * must fix the pointer. Warning: the pointer must be put back to its + * original form in order to free it, use zcfree(). + */ + +#define MAX_PTR 10 +/* 10*64K = 640K */ + +local int next_ptr = 0; + +typedef struct ptr_table_s { + voidpf org_ptr; + voidpf new_ptr; +} ptr_table; + +local ptr_table table[MAX_PTR]; +/* This table is used to remember the original form of pointers + * to large buffers (64K). Such pointers are normalized with a zero offset. + * Since MSDOS is not a preemptive multitasking OS, this table is not + * protected from concurrent access. This hack doesn't work anyway on + * a protected system like OS/2. Use Microsoft C instead. + */ + +voidpf zcalloc (voidpf opaque, unsigned items, unsigned size) +{ + voidpf buf = opaque; /* just to make some compilers happy */ + ulg bsize = (ulg)items*size; + + /* If we allocate less than 65520 bytes, we assume that farmalloc + * will return a usable pointer which doesn't have to be normalized. + */ + if (bsize < 65520L) { + buf = farmalloc(bsize); + if (*(ush*)&buf != 0) return buf; + } else { + buf = farmalloc(bsize + 16L); + } + if (buf == NULL || next_ptr >= MAX_PTR) return NULL; + table[next_ptr].org_ptr = buf; + + /* Normalize the pointer to seg:0 */ + *((ush*)&buf+1) += ((ush)((uch*)buf-0) + 15) >> 4; + *(ush*)&buf = 0; + table[next_ptr++].new_ptr = buf; + return buf; +} + +void zcfree (voidpf opaque, voidpf ptr) +{ + int n; + if (*(ush*)&ptr != 0) { /* object < 64K */ + farfree(ptr); + return; + } + /* Find the original pointer */ + for (n = 0; n < next_ptr; n++) { + if (ptr != table[n].new_ptr) continue; + + farfree(table[n].org_ptr); + while (++n < next_ptr) { + table[n-1] = table[n]; + } + next_ptr--; + return; + } + ptr = opaque; /* just to make some compilers happy */ + Assert(0, "zcfree: ptr not found"); +} +#endif +#endif /* __TURBOC__ */ + + +#if defined(M_I86) && !defined(__32BIT__) +/* Microsoft C in 16-bit mode */ + +# define MY_ZCALLOC + +#if (!defined(_MSC_VER) || (_MSC_VER <= 600)) +# define _halloc halloc +# define _hfree hfree +#endif + +voidpf zcalloc (voidpf opaque, unsigned items, unsigned size) +{ + if (opaque) opaque = 0; /* to make compiler happy */ + return _halloc((long)items, size); +} + +void zcfree (voidpf opaque, voidpf ptr) +{ + if (opaque) opaque = 0; /* to make compiler happy */ + _hfree(ptr); +} + +#endif /* MSC */ + + +#ifndef MY_ZCALLOC /* Any system without a special alloc function */ + +#ifndef STDC +extern voidp calloc OF((uInt items, uInt size)); +extern void free OF((voidpf ptr)); +#endif + +voidpf zcalloc (opaque, items, size) + voidpf opaque; + unsigned items; + unsigned size; +{ + if (opaque) items += size - size; /* make compiler happy */ + return (voidpf)calloc(items, size); +} + +void zcfree (opaque, ptr) + voidpf opaque; + voidpf ptr; +{ + free(ptr); + if (opaque) return; /* make compiler happy */ +} + +#endif /* MY_ZCALLOC */ diff --git a/Utilities/cmzlib/zutil.h b/Utilities/cmzlib/zutil.h new file mode 100644 index 0000000..e15f09e --- /dev/null +++ b/Utilities/cmzlib/zutil.h @@ -0,0 +1,220 @@ +/* zutil.h -- internal interface and configuration of the compression library + * Copyright (C) 1995-2002 Jean-loup Gailly. + * For conditions of distribution and use, see copyright notice in zlib.h + */ + +/* WARNING: this file should *not* be used by applications. It is + part of the implementation of the compression library and is + subject to change. Applications should only use zlib.h. + */ + +/* @(#) $Id$ */ + +#ifndef _Z_UTIL_H +#define _Z_UTIL_H + +#include "zlib.h" + +#ifdef STDC +# include <stddef.h> +# include <string.h> +# include <stdlib.h> +#endif +#ifdef NO_ERRNO_H + extern int errno; +#else +# include <errno.h> +#endif + +#ifndef local +# define local static +#endif +/* compile with -Dlocal if your debugger can't find static symbols */ + +typedef unsigned char uch; +typedef uch FAR uchf; +typedef unsigned short ush; +typedef ush FAR ushf; +typedef unsigned long ulg; + +extern const char *z_errmsg[10]; /* indexed by 2-zlib_error */ +/* (size given to avoid silly warnings with Visual C++) */ + +#define ERR_MSG(err) z_errmsg[Z_NEED_DICT-(err)] + +#define ERR_RETURN(strm,err) \ + return (strm->msg = (char*)ERR_MSG(err), (err)) +/* To be used only when the state is known to be valid */ + + /* common constants */ + +#ifndef DEF_WBITS +# define DEF_WBITS MAX_WBITS +#endif +/* default windowBits for decompression. MAX_WBITS is for compression only */ + +#if MAX_MEM_LEVEL >= 8 +# define DEF_MEM_LEVEL 8 +#else +# define DEF_MEM_LEVEL MAX_MEM_LEVEL +#endif +/* default memLevel */ + +#define STORED_BLOCK 0 +#define STATIC_TREES 1 +#define DYN_TREES 2 +/* The three kinds of block type */ + +#define MIN_MATCH 3 +#define MAX_MATCH 258 +/* The minimum and maximum match lengths */ + +#define PRESET_DICT 0x20 /* preset dictionary flag in zlib header */ + + /* target dependencies */ + +#ifdef MSDOS +# define OS_CODE 0x00 +# if defined(__TURBOC__) || defined(__BORLANDC__) +# if(__STDC__ == 1) && (defined(__LARGE__) || defined(__COMPACT__)) + /* Allow compilation with ANSI keywords only enabled */ + void _Cdecl farfree( void *block ); + void *_Cdecl farmalloc( unsigned long nbytes ); +# else +# include <alloc.h> +# endif +# else /* MSC or DJGPP */ +# include <malloc.h> +# endif +#endif + +#ifdef OS2 +# define OS_CODE 0x06 +#endif + +#ifdef WIN32 /* Window 95 & Windows NT */ +# define OS_CODE 0x0b +#endif + +#if defined(VAXC) || defined(VMS) +# define OS_CODE 0x02 +# define F_OPEN(name, mode) \ + fopen((name), (mode), "mbc=60", "ctx=stm", "rfm=fix", "mrs=512") +#endif + +#ifdef AMIGA +# define OS_CODE 0x01 +#endif + +#if defined(ATARI) || defined(atarist) +# define OS_CODE 0x05 +#endif + +#if defined(MACOS) || defined(TARGET_OS_MAC) +# define OS_CODE 0x07 +# if defined(__MWERKS__) && __dest_os != __be_os && __dest_os != __win32_os +# include <unix.h> /* for fdopen */ +# else +# ifndef fdopen +# define fdopen(fd,mode) NULL /* No fdopen() */ +# endif +# endif +#endif + +#ifdef __50SERIES /* Prime/PRIMOS */ +# define OS_CODE 0x0F +#endif + +#ifdef TOPS20 +# define OS_CODE 0x0a +#endif + +#if defined(_BEOS_) || defined(RISCOS) +# define fdopen(fd,mode) NULL /* No fdopen() */ +#endif + +#if (defined(_MSC_VER) && (_MSC_VER > 600)) +# define fdopen(fd,type) _fdopen(fd,type) +#endif + + + /* Common defaults */ + +#ifndef OS_CODE +# define OS_CODE 0x03 /* assume Unix */ +#endif + +#ifndef F_OPEN +# define F_OPEN(name, mode) fopen((name), (mode)) +#endif + + /* functions */ + +#ifdef HAVE_STRERROR + extern char *strerror OF((int)); +# define zstrerror(errnum) strerror(errnum) +#else +# define zstrerror(errnum) "" +#endif + +#if defined(pyr) +# define NO_MEMCPY +#endif +#if defined(SMALL_MEDIUM) && !defined(_MSC_VER) && !defined(__SC__) + /* Use our own functions for small and medium model with MSC <= 5.0. + * You may have to use the same strategy for Borland C (untested). + * The __SC__ check is for Symantec. + */ +# define NO_MEMCPY +#endif +#if defined(STDC) && !defined(HAVE_MEMCPY) && !defined(NO_MEMCPY) +# define HAVE_MEMCPY +#endif +#ifdef HAVE_MEMCPY +# ifdef SMALL_MEDIUM /* MSDOS small or medium model */ +# define zmemcpy _fmemcpy +# define zmemcmp _fmemcmp +# define zmemzero(dest, len) _fmemset(dest, 0, len) +# else +# define zmemcpy memcpy +# define zmemcmp memcmp +# define zmemzero(dest, len) memset(dest, 0, len) +# endif +#else + extern void zmemcpy OF((Bytef* dest, const Bytef* source, uInt len)); + extern int zmemcmp OF((const Bytef* s1, const Bytef* s2, uInt len)); + extern void zmemzero OF((Bytef* dest, uInt len)); +#endif + +/* Diagnostic functions */ +#ifdef DEBUG +# include <stdio.h> + extern int z_verbose; + extern void z_error OF((char *m)); +# define Assert(cond,msg) {if(!(cond)) z_error(msg);} +# define Trace(x) {if (z_verbose>=0) fprintf x ;} +# define Tracev(x) {if (z_verbose>0) fprintf x ;} +# define Tracevv(x) {if (z_verbose>1) fprintf x ;} +# define Tracec(c,x) {if (z_verbose>0 && (c)) fprintf x ;} +# define Tracecv(c,x) {if (z_verbose>1 && (c)) fprintf x ;} +#else +# define Assert(cond,msg) +# define Trace(x) +# define Tracev(x) +# define Tracevv(x) +# define Tracec(c,x) +# define Tracecv(c,x) +#endif + + +typedef uLong (ZEXPORT *check_func) OF((uLong check, const Bytef *buf, + uInt len)); +voidpf zcalloc OF((voidpf opaque, unsigned items, unsigned size)); +void zcfree OF((voidpf opaque, voidpf ptr)); + +#define ZALLOC(strm, items, size) \ + (*((strm)->zalloc))((strm)->opaque, (items), (size)) +#define ZFREE(strm, addr) (*((strm)->zfree))((strm)->opaque, (voidpf)(addr)) +#define TRY_FREE(s, p) {if (p) ZFREE(s, p);} + +#endif /* _Z_UTIL_H */ |