diff options
Diffstat (limited to 'Utilities/cmzstd/lib/compress/zstdmt_compress.h')
| -rw-r--r-- | Utilities/cmzstd/lib/compress/zstdmt_compress.h | 174 |
1 files changed, 174 insertions, 0 deletions
diff --git a/Utilities/cmzstd/lib/compress/zstdmt_compress.h b/Utilities/cmzstd/lib/compress/zstdmt_compress.h new file mode 100644 index 0000000..ee77168 --- /dev/null +++ b/Utilities/cmzstd/lib/compress/zstdmt_compress.h @@ -0,0 +1,174 @@ +/* + * Copyright (c) 2016-present, Yann Collet, Facebook, Inc. + * All rights reserved. + * + * This source code is licensed under both the BSD-style license (found in the + * LICENSE file in the root directory of this source tree) and the GPLv2 (found + * in the COPYING file in the root directory of this source tree). + * You may select, at your option, one of the above-listed licenses. + */ + + #ifndef ZSTDMT_COMPRESS_H + #define ZSTDMT_COMPRESS_H + + #if defined (__cplusplus) + extern "C" { + #endif + + +/* Note : This is an internal API. + * Some methods are still exposed (ZSTDLIB_API), + * because it used to be the only way to invoke MT compression. + * Now, it's recommended to use ZSTD_compress_generic() instead. + * These methods will stop being exposed in a future version */ + +/* === Dependencies === */ +#include <stddef.h> /* size_t */ +#define ZSTD_STATIC_LINKING_ONLY /* ZSTD_parameters */ +#include "zstd.h" /* ZSTD_inBuffer, ZSTD_outBuffer, ZSTDLIB_API */ + + +/* === Constants === */ +#ifndef ZSTDMT_NBWORKERS_MAX +# define ZSTDMT_NBWORKERS_MAX 200 +#endif +#ifndef ZSTDMT_JOBSIZE_MIN +# define ZSTDMT_JOBSIZE_MIN (1 MB) +#endif +#define ZSTDMT_JOBSIZE_MAX (MEM_32bits() ? (512 MB) : (1024 MB)) + + +/* === Memory management === */ +typedef struct ZSTDMT_CCtx_s ZSTDMT_CCtx; +ZSTDLIB_API ZSTDMT_CCtx* ZSTDMT_createCCtx(unsigned nbWorkers); +ZSTDLIB_API ZSTDMT_CCtx* ZSTDMT_createCCtx_advanced(unsigned nbWorkers, + ZSTD_customMem cMem); +ZSTDLIB_API size_t ZSTDMT_freeCCtx(ZSTDMT_CCtx* mtctx); + +ZSTDLIB_API size_t ZSTDMT_sizeof_CCtx(ZSTDMT_CCtx* mtctx); + + +/* === Simple one-pass compression function === */ + +ZSTDLIB_API size_t ZSTDMT_compressCCtx(ZSTDMT_CCtx* mtctx, + void* dst, size_t dstCapacity, + const void* src, size_t srcSize, + int compressionLevel); + + + +/* === Streaming functions === */ + +ZSTDLIB_API size_t ZSTDMT_initCStream(ZSTDMT_CCtx* mtctx, int compressionLevel); +ZSTDLIB_API size_t ZSTDMT_resetCStream(ZSTDMT_CCtx* mtctx, unsigned long long pledgedSrcSize); /**< if srcSize is not known at reset time, use ZSTD_CONTENTSIZE_UNKNOWN. Note: for compatibility with older programs, 0 means the same as ZSTD_CONTENTSIZE_UNKNOWN, but it will change in the future to mean "empty" */ + +ZSTDLIB_API size_t ZSTDMT_nextInputSizeHint(const ZSTDMT_CCtx* mtctx); +ZSTDLIB_API size_t ZSTDMT_compressStream(ZSTDMT_CCtx* mtctx, ZSTD_outBuffer* output, ZSTD_inBuffer* input); + +ZSTDLIB_API size_t ZSTDMT_flushStream(ZSTDMT_CCtx* mtctx, ZSTD_outBuffer* output); /**< @return : 0 == all flushed; >0 : still some data to be flushed; or an error code (ZSTD_isError()) */ +ZSTDLIB_API size_t ZSTDMT_endStream(ZSTDMT_CCtx* mtctx, ZSTD_outBuffer* output); /**< @return : 0 == all flushed; >0 : still some data to be flushed; or an error code (ZSTD_isError()) */ + + +/* === Advanced functions and parameters === */ + +ZSTDLIB_API size_t ZSTDMT_compress_advanced(ZSTDMT_CCtx* mtctx, + void* dst, size_t dstCapacity, + const void* src, size_t srcSize, + const ZSTD_CDict* cdict, + ZSTD_parameters params, + int overlapLog); + +ZSTDLIB_API size_t ZSTDMT_initCStream_advanced(ZSTDMT_CCtx* mtctx, + const void* dict, size_t dictSize, /* dict can be released after init, a local copy is preserved within zcs */ + ZSTD_parameters params, + unsigned long long pledgedSrcSize); /* pledgedSrcSize is optional and can be zero == unknown */ + +ZSTDLIB_API size_t ZSTDMT_initCStream_usingCDict(ZSTDMT_CCtx* mtctx, + const ZSTD_CDict* cdict, + ZSTD_frameParameters fparams, + unsigned long long pledgedSrcSize); /* note : zero means empty */ + +/* ZSTDMT_parameter : + * List of parameters that can be set using ZSTDMT_setMTCtxParameter() */ +typedef enum { + ZSTDMT_p_jobSize, /* Each job is compressed in parallel. By default, this value is dynamically determined depending on compression parameters. Can be set explicitly here. */ + ZSTDMT_p_overlapLog, /* Each job may reload a part of previous job to enhance compressionr ratio; 0 == no overlap, 6(default) == use 1/8th of window, >=9 == use full window. This is a "sticky" parameter : its value will be re-used on next compression job */ + ZSTDMT_p_rsyncable /* Enables rsyncable mode. */ +} ZSTDMT_parameter; + +/* ZSTDMT_setMTCtxParameter() : + * allow setting individual parameters, one at a time, among a list of enums defined in ZSTDMT_parameter. + * The function must be called typically after ZSTD_createCCtx() but __before ZSTDMT_init*() !__ + * Parameters not explicitly reset by ZSTDMT_init*() remain the same in consecutive compression sessions. + * @return : 0, or an error code (which can be tested using ZSTD_isError()) */ +ZSTDLIB_API size_t ZSTDMT_setMTCtxParameter(ZSTDMT_CCtx* mtctx, ZSTDMT_parameter parameter, int value); + +/* ZSTDMT_getMTCtxParameter() : + * Query the ZSTDMT_CCtx for a parameter value. + * @return : 0, or an error code (which can be tested using ZSTD_isError()) */ +ZSTDLIB_API size_t ZSTDMT_getMTCtxParameter(ZSTDMT_CCtx* mtctx, ZSTDMT_parameter parameter, int* value); + + +/*! ZSTDMT_compressStream_generic() : + * Combines ZSTDMT_compressStream() with optional ZSTDMT_flushStream() or ZSTDMT_endStream() + * depending on flush directive. + * @return : minimum amount of data still to be flushed + * 0 if fully flushed + * or an error code + * note : needs to be init using any ZSTD_initCStream*() variant */ +ZSTDLIB_API size_t ZSTDMT_compressStream_generic(ZSTDMT_CCtx* mtctx, + ZSTD_outBuffer* output, + ZSTD_inBuffer* input, + ZSTD_EndDirective endOp); + + +/* ======================================================== + * === Private interface, for use by ZSTD_compress.c === + * === Not exposed in libzstd. Never invoke directly === + * ======================================================== */ + + /*! ZSTDMT_toFlushNow() + * Tell how many bytes are ready to be flushed immediately. + * Probe the oldest active job (not yet entirely flushed) and check its output buffer. + * If return 0, it means there is no active job, + * or, it means oldest job is still active, but everything produced has been flushed so far, + * therefore flushing is limited by speed of oldest job. */ +size_t ZSTDMT_toFlushNow(ZSTDMT_CCtx* mtctx); + +/*! ZSTDMT_CCtxParam_setMTCtxParameter() + * like ZSTDMT_setMTCtxParameter(), but into a ZSTD_CCtx_Params */ +size_t ZSTDMT_CCtxParam_setMTCtxParameter(ZSTD_CCtx_params* params, ZSTDMT_parameter parameter, int value); + +/*! ZSTDMT_CCtxParam_setNbWorkers() + * Set nbWorkers, and clamp it. + * Also reset jobSize and overlapLog */ +size_t ZSTDMT_CCtxParam_setNbWorkers(ZSTD_CCtx_params* params, unsigned nbWorkers); + +/*! ZSTDMT_updateCParams_whileCompressing() : + * Updates only a selected set of compression parameters, to remain compatible with current frame. + * New parameters will be applied to next compression job. */ +void ZSTDMT_updateCParams_whileCompressing(ZSTDMT_CCtx* mtctx, const ZSTD_CCtx_params* cctxParams); + +/*! ZSTDMT_getFrameProgression(): + * tells how much data has been consumed (input) and produced (output) for current frame. + * able to count progression inside worker threads. + */ +ZSTD_frameProgression ZSTDMT_getFrameProgression(ZSTDMT_CCtx* mtctx); + + +/*! ZSTDMT_initCStream_internal() : + * Private use only. Init streaming operation. + * expects params to be valid. + * must receive dict, or cdict, or none, but not both. + * @return : 0, or an error code */ +size_t ZSTDMT_initCStream_internal(ZSTDMT_CCtx* zcs, + const void* dict, size_t dictSize, ZSTD_dictContentType_e dictContentType, + const ZSTD_CDict* cdict, + ZSTD_CCtx_params params, unsigned long long pledgedSrcSize); + + +#if defined (__cplusplus) +} +#endif + +#endif /* ZSTDMT_COMPRESS_H */ |