diff options
Diffstat (limited to 'configure.in.sample')
| -rw-r--r-- | configure.in.sample | 503 |
1 files changed, 0 insertions, 503 deletions
diff --git a/configure.in.sample b/configure.in.sample deleted file mode 100644 index 75048a4..0000000 --- a/configure.in.sample +++ /dev/null @@ -1,503 +0,0 @@ -# Process this file with autoconf to produce a configure script. -AC_INIT() - -AC_CONFIG_HEADER(CMake/Source/cmConfigure.h) - -CMAKE_CONFIG_DIR=`pwd` -AC_SUBST(CMAKE_CONFIG_DIR) - -# -# check for some programs we use -# -AC_PROG_CC -AC_PROG_CXX -AC_PROG_RANLIB -AC_PROG_INSTALL -AC_PATH_XTRA - - -# get byte swapping info -AC_C_BIGENDIAN -if test $ac_cv_c_bigendian = yes; then - CMAKE_WORDS_BIGENDIAN=1 -fi -AC_SUBST(CMAKE_WORDS_BIGENDIAN) - - -# some stuff Tcl uses -# -AC_CHECK_HEADER(limits.h, HAVE_LIMITS_H=-DHAVE_LIMITS_H,HAVE_LIMITS_H="") -AC_SUBST(CMAKE_HAVE_LIMITS_H) -AC_HAVE_HEADERS(unistd.h, HAVE_UNISTD_H=-DHAVE_UNISTD_H,HAVE_UNISTD_H="") -AC_SUBST(CMAKE_HAVE_UNISTD_H) - -# Step 1: set the variable "system" to hold the name and version number -# for the system. This can usually be done via the "uname" command, but -# there are a few systems, like Next, where this doesn't work. - -AC_MSG_CHECKING([system version (for dynamic loading)]) -if test -f /usr/lib/NextStep/software_version; then - system=NEXTSTEP-`awk '/3/,/3/' /usr/lib/NextStep/software_version` -else - system=`uname -s`-`uname -r` - if test "$?" -ne 0 ; then - AC_MSG_RESULT([unknown (can't find uname command)]) - system=unknown - else - # Special check for weird MP-RAS system (uname returns weird - # results, and the version is kept in special file). - - if test -r /etc/.relid -a "X`uname -n`" = "X`uname -s`" ; then - system=MP-RAS-`awk '{print $3}' /etc/.relid'` - fi - AC_MSG_RESULT($system) - fi -fi - -# -# use shared libs -# - - -CMAKE_shared_ok="yes" -# the following is an excerpt from the tcl7.5b2 configure.in -#-------------------------------------------------------------------- -# The statements below define a collection of symbols related to -# dynamic loading and shared libraries: -# -# CMAKE_SHLIB_CFLAGS - Flags to pass to cc when compiling the components -# of a shared library (may request position-independent -# code, among other things). -# CMAKE_SHLIB_LD_LIBS - Dependent libraries for the linker to scan when -# creating shared libraries. This symbol typically -# goes at the end of the "ld" commands that build -# shared libraries. The value of the symbol if -# "${LIBS}" if all of the dependent libraries should -# be specified when creating a shared library. If -# dependent libraries should not be specified (as on -# SunOS 4.x, where they cause the link to fail, or in -# general if Tcl and Tk aren't themselves shared -# libraries), then this symbol has an empty string -# as its value. -# CMAKE_SHLIB_SUFFIX - Suffix to use for the name of the shared library. An -# empty string means we don't know how to use shared -# libraries on this platform. -# CMAKE_SHLIB_BUILD_FLAGS - -# Flags to use when building a shared library. -# CMAKE_SHLIB_LINK_FLAGS - -# Flags to pass to the compiler when linking object -# files into an executable application binary such -# as tclsh. -#-------------------------------------------------------------------- - - -# Step 2: check for existence of -ldl library. This is needed because -# Linux can use either -ldl or -ldld for dynamic loading. - -AC_CHECK_LIB(dl, dlopen, have_dl=yes, have_dl=no) - -# Step 4: set configuration options based on system name and version. - -fullSrcDir=`cd $srcdir; pwd` -AC_SUBST(fullSrcDir) -case $system in - AIX-*) - # AIX: can't link shared library extensions unless Tcl and Tk are - # also shared libraries. - CMAKE_SHLIB_CFLAGS="" - CMAKE_SHLIB_LD_LIBS='${LIBS}' - CMAKE_SHLIB_SUFFIX="..o" - CMAKE_DL_LIBS="" - AC_CHECK_LIB(ld,printf, CMAKE_DL_LIBS="-lld") - CMAKE_SHLIB_LINK_FLAGS="" - ;; - HP-UX-*.08.*|HP-UX-*.09.*|HP-UX-*.10.*) - CMAKE_SHLIB_CFLAGS="+z" - CMAKE_SHLIB_LD_LIBS="" - CMAKE_SHLIB_SUFFIX=".sl" - CMAKE_DL_LIBS="-ldld" - CMAKE_SHLIB_BUILD_FLAGS='+Z -Wl,-E -Wl,-b' - CMAKE_SHLIB_LINK_FLAGS='-Wl,+s -Wl,+b,${LIB_RUNTIME_DIR}' - if test "$CC" = "gcc" -o `$CC -v 2>&1 | grep -c gcc` != "0" ; then - CMAKE_SHLIB_BUILD_FLAGS='-shared -Wl,-E -Wl,-b' - CMAKE_SHLIB_LINK_FLAGS='-Wl,+s -Wl,+b,${LIB_RUNTIME_DIR}' - fi - ;; - IRIX-5.*) - CMAKE_SHLIB_CFLAGS="" - CMAKE_SHLIB_LD_LIBS="" - CMAKE_SHLIB_SUFFIX=".so" - CMAKE_DL_LIBS="" - CMAKE_SHLIB_BUILD_FLAGS="-shared -rdata_shared" - ;; - IRIX-6* | IRIX64-6* | IRIX-64-6*) - CMAKE_SHLIB_CFLAGS="" - CMAKE_SHLIB_LD_LIBS="" - CMAKE_SHLIB_SUFFIX=".so" - CMAKE_DL_LIBS="" - CMAKE_SHLIB_BUILD_FLAGS="-shared -rdata_shared" - ;; - Linux*) - CMAKE_SHLIB_CFLAGS="-fPIC" - CMAKE_SHLIB_LD_LIBS="" - CMAKE_SHLIB_SUFFIX=".so" - CMAKE_SHLIB_BUILD_FLAGS="-shared" - if test "$have_dl" = yes; then - CMAKE_DL_LIBS="-ldl" - CMAKE_SHLIB_LINK_FLAGS="-rdynamic" - else - AC_CHECK_HEADER(dld.h, [ - CMAKE_DL_LIBS="-ldld" - CMAKE_SHLIB_LINK_FLAGS=""]) - fi - ;; - CYGWIN_NT*) - CMAKE_SHLIB_CFLAGS="" - CMAKE_DL_LIBS="-lgdi32" - CMAKE_SHLIB_SUFFIX=".dll" - CMAKE_SHLIB_LINK_FLAGS="-shared" - ;; - MP-RAS-02*) - CMAKE_SHLIB_CFLAGS="-K PIC" - CMAKE_SHLIB_LD_LIBS="" - CMAKE_SHLIB_SUFFIX=".so" - CMAKE_DL_LIBS="-ldl" - CMAKE_SHLIB_LINK_FLAGS="" - ;; - MP-RAS-*) - CMAKE_SHLIB_CFLAGS="-K PIC" - CMAKE_SHLIB_LD_LIBS="" - CMAKE_SHLIB_SUFFIX=".so" - CMAKE_DL_LIBS="-ldl" - CMAKE_SHLIB_LINK_FLAGS="-Wl,-Bexport" - ;; - NetBSD-*|FreeBSD-*) - # Not available on all versions: check for include file. - if test -f /usr/include/dlfcn.h; then - CMAKE_SHLIB_CFLAGS="-fpic" - CMAKE_SHLIB_LD_LIBS="" - CMAKE_SHLIB_SUFFIX=".so" - CMAKE_DL_LIBS="" - CMAKE_SHLIB_LINK_FLAGS="-shared" - else - CMAKE_SHLIB_CFLAGS="" - CMAKE_SHLIB_LD_LIBS="" - CMAKE_SHLIB_SUFFIX="..o" - CMAKE_DL_LIBS="" - CMAKE_SHLIB_LINK_FLAGS="" - fi - ;; - NEXTSTEP-*) - CMAKE_SHLIB_CFLAGS="" - CMAKE_SHLIB_LD_LIBS="" - CMAKE_SHLIB_SUFFIX=".so" - CMAKE_DL_LIBS="" - CMAKE_SHLIB_LINK_FLAGS="" - ;; - OSF1-1.[012]) - # OSF/1 1.[012] from OSF, and derivatives, including Paragon OSF/1 - CMAKE_SHLIB_CFLAGS="" - # Hack: make package name same as library name - CMAKE_SHLIB_LD_LIBS="" - CMAKE_SHLIB_SUFFIX=".so" - CMAKE_DL_LIBS="" - CMAKE_SHLIB_LINK_FLAGS="" - ;; - OSF1-1.*) - # OSF/1 1.3 from OSF using ELF, and derivatives, including AD2 - CMAKE_SHLIB_CFLAGS="-fpic" - CMAKE_SHLIB_LD_LIBS="" - CMAKE_SHLIB_SUFFIX=".so" - CMAKE_DL_LIBS="" - CMAKE_SHLIB_LINK_FLAGS="" - ;; - OSF1-V*) - # Digital OSF/1 - CMAKE_SHLIB_CFLAGS="" - CMAKE_SHLIB_LD_LIBS="" - CMAKE_SHLIB_SUFFIX=".so" - CMAKE_DL_LIBS="" - CMAKE_SHLIB_BUILD_FLAGS='-shared -Wl,-expect_unresolved,"*"' - CMAKE_SHLIB_LINK_FLAGS='-Wl,-rpath,${LIB_RUNTIME_DIR}' - ;; - RISCos-*) - CMAKE_SHLIB_CFLAGS="-G 0" - CMAKE_SHLIB_LD_LIBS="" - CMAKE_SHLIB_SUFFIX="..o" - CMAKE_DL_LIBS="" - CMAKE_SHLIB_LINK_FLAGS="-Wl,-D,08000000" - ;; - SCO_SV-3.2*) - # Note, dlopen is available only on SCO 3.2.5 and greater. However, - # this test works, since "uname -s" was non-standard in 3.2.4 and - # below. - CMAKE_SHLIB_CFLAGS="-Kpic -belf" - CMAKE_SHLIB_LD_LIBS="" - CMAKE_SHLIB_SUFFIX=".so" - CMAKE_DL_LIBS="" - CMAKE_SHLIB_LINK_FLAGS="-belf -Wl,-Bexport" - ;; - SINIX*5.4*) - CMAKE_SHLIB_CFLAGS="-K PIC" - CMAKE_SHLIB_LD_LIBS="" - CMAKE_SHLIB_SUFFIX=".so" - CMAKE_DL_LIBS="-ldl" - CMAKE_SHLIB_LINK_FLAGS="" - ;; - SunOS-4*) - CMAKE_SHLIB_CFLAGS="-PIC" - CMAKE_SHLIB_LD_LIBS="" - CMAKE_SHLIB_SUFFIX=".so" - CMAKE_DL_LIBS="-ldl" - CMAKE_SHLIB_BUILD_FLAGS='-shared -Wl,-r -nostdlib' - CMAKE_SHLIB_LINK_FLAGS='-Wl,-L${LIB_RUNTIME_DIR}' - ;; - SunOS-5*) - CMAKE_SHLIB_CFLAGS="-KPIC" - CMAKE_SHLIB_LD_LIBS='${LIBS}' - CMAKE_SHLIB_SUFFIX=".so" - CMAKE_DL_LIBS="-ldl" - CMAKE_SHLIB_BUILD_FLAGS='-G' - CMAKE_SHLIB_LINK_FLAGS='-R ${LIB_RUNTIME_DIR}' - if test "$CC" = "gcc" -o `$CC -v 2>&1 | grep -c gcc` != "0" ; then - CMAKE_SHLIB_BUILD_FLAGS='-Wl,-G' - CMAKE_SHLIB_LINK_FLAGS='-Wl,-R,${LIB_RUNTIME_DIR}' - fi - ;; - ULTRIX-4.*) - CMAKE_SHLIB_CFLAGS="-G 0" - CMAKE_SHLIB_SUFFIX="..o" - CMAKE_SHLIB_LD_LIBS="" - CMAKE_DL_LIBS="" - CMAKE_SHLIB_LINK_FLAGS="-Wl,-D,08000000" - ;; - UNIX_SV*) - CMAKE_SHLIB_CFLAGS="-K PIC" - CMAKE_SHLIB_LD_LIBS="" - CMAKE_SHLIB_SUFFIX=".so" - CMAKE_DL_LIBS="-ldl" - CMAKE_SHLIB_LINK_FLAGS="-Wl,-Bexport" - ;; -esac -export CMAKE_SHLIB_SUFFIX - -# If we're running gcc, then change the C flags for compiling shared -# libraries to the right flags for gcc, instead of those for the -# standard manufacturer compiler. -if test "$CC" = "gcc" -o `$CC -v 2>&1 | grep -c gcc` != "0" ; then - CMAKE_SHLIB_CFLAGS="-fPIC" -fi -# if running on cygwin remove -fPIC flag -case $system in - CYGWIN_NT*) - CMAKE_SHLIB_CFLAGS="" - ;; -esac - -CMAKE_SHLIB_CFLAGS="${SHLIB_CFLAGS}" -CMAKE_LD_SEARCH_FLAGS="${LD_SEARCH_FLAGS}" - - -AC_SUBST(CMAKE_SHLIB_LINK_FLAGS) -AC_SUBST(CMAKE_SHLIB_BUILD_FLAGS) -AC_SUBST(CMAKE_SHLIB_CFLAGS) -AC_SUBST(CMAKE_LIB_EXT) -AC_SUBST(CMAKE_DL_LIBS) -AC_SUBST(CMAKE_SHLIB_LD_LIBS) -AC_SUBST(CMAKE_SHLIB_SUFFIX) - - -########################## -## ## -## Check thread support ## -## ## -########################## -# initialize thread vars -CMAKE_THREAD_LIBS="" -use_sproc=no -CMAKE_USE_SPROC=0 -CMAKE_USE_PTHREADS=0 -CMAKE_HP_PTHREADS=0 - -########################## -## ## -## sproc ## -## ## -########################## -# check for sproc -force_sproc=no -AC_ARG_WITH(sproc, - [ --with-sproc use sproc instead of pthreads if possible], - if test "$withval" = yes; then - force_sproc=yes - fi,) - - - -AC_CHECK_HEADERS(sys/prctl.h, [use_sproc=yes]) -if test "$use_sproc" = "yes"; then -case $system in - Linux* | IRIX64-6.5 | IRIX-6.5) - if test "$force_sproc" = "yes"; then - CMAKE_USE_SPROC=1 - else - use_sproc=no - fi - ;; - IRIX*) - CMAKE_USE_SPROC=1 - ;; -esac -fi -use_pthreads=no -AC_CHECK_HEADERS(pthread.h, [use_pthreads=yes]) -if test "$use_pthreads" = "yes"; then - if test "$use_sproc" = "no"; then - AC_CHECK_LIB(pthreads, pthread_create, CMAKE_THREAD_LIBS="-lpthreads") - AC_CHECK_LIB(pthread, pthread_create, CMAKE_THREAD_LIBS="-lpthread") -# Work around Solaris 5.6 and 5.7 bug: - if test "`uname -s -r`" = "SunOS 5.6"; then - AC_CHECK_LIB(thread, thr_create, CMAKE_THREAD_LIBS="$CMAKE_THREAD_LIBS -lthread") - fi - if test "`uname -s -r`" = "SunOS 5.7"; then - AC_CHECK_LIB(thread, thr_create, CMAKE_THREAD_LIBS="$CMAKE_THREAD_LIBS -lthread") - fi - CMAKE_USE_PTHREADS=1 - fi -fi - -# on an HP with pthread we need to use -lcma -# on dec alphas we have had problems as well -if test "$use_pthreads" = "yes"; then -case $system in - HP-UX-*.10.*) - CMAKE_THREAD_LIBS="-lcma" - CMAKE_USE_PTHREADS=1 - CMAKE_HP_PTHREADS=1 - ;; - OSF1-V*) - CMAKE_USE_PTHREADS=0 - CMAKE_THREAD_LIBS="" - ;; - FreeBSD*) - CMAKE_USE_PTHREADS=0 - CMAKE_THREAD_LIBS="" - ;; -esac -fi - - -AC_SUBST(CMAKE_USE_SPROC) -AC_SUBST(CMAKE_USE_PTHREADS) -AC_SUBST(CMAKE_HP_PTHREADS) -AC_SUBST(CMAKE_THREAD_LIBS) - - -CMAKE_ANSI_CFLAGS="" -# on hp use -Aa for ansi -if test $ac_cv_prog_gxx = no; then -case $system in - HP-UX-*.08.*|HP-UX-*.09.*|HP-UX-*.10.*) - echo $ac_n "checking whether ${CC} accepts -Aa""... $ac_c" 1>&6 - echo 'void f(){}' > conftest.c - if test -z "`${CC} -Aa -c conftest.c 2>&1`"; then - echo "$ac_t""yes" 1>&6 - CMAKE_ANSI_CFLAGS="-Aa" - else - echo "$ac_t""no" 1>&6 - fi - rm -f conftest* - ;; -esac -fi -AC_SUBST(CMAKE_ANSI_CFLAGS) - -# if we are not running g++ then we might need some other flags -# to get the templates compiled correctly -CMAKE_TEMPLATE_FLAGS="" -if test $ac_cv_prog_gxx = no; then - echo $ac_n "checking whether ${CXX} accepts -ptused -no_prelink""... $ac_c" 1>&6 - echo 'void f(){}' > conftest.cc - if test -z "`${CXX} -ptused -no_prelink -c conftest.cc 2>&1`"; then - echo "$ac_t""yes" 1>&6 - CMAKE_TEMPLATE_FLAGS="-ptused -no_prelink" - else - echo "$ac_t""no" 1>&6 - fi - rm -f conftest* - echo $ac_n "checking whether ${CXX} accepts -instances=semiexplicit""... $ac_c" 1>&6 - echo 'void f(){}' > conftest.cc - if test -z "`${CXX} -instances=static -c conftest.cc 2>&1`"; then - echo "$ac_t""yes" 1>&6 - CMAKE_TEMPLATE_FLAGS="-instances=static" - else - echo "$ac_t""no" 1>&6 - fi -fi -AC_SUBST(CMAKE_TEMPLATE_FLAGS) - -# check no g++ compilers to see if they have the standard -# ansi stream files (without the .h) -if test $ac_cv_prog_gxx = no; then - AC_MSG_CHECKING( ansi standard C++ stream headers ) - echo "******" - rm -rf conftest.* - cat > conftest.cc <<! -#include <iostream> -! - if test -z "`${CXX} -c conftest.cc 2>&1`"; then - echo "$ac_t""yes" 1>&6 - else - AC_DEFINE(CMAKE_NO_STD_NAMESPACE) - echo "$ac_t""no" 1>&6 - fi -fi - -# check to see if stl is in the std namespace -if test $ac_cv_prog_gxx = no; then - echo "******" - AC_MSG_CHECKING( ansi standard namespace support ) - rm -rf conftest.* - cat > conftest.cc <<! -#include <list> -void foo() { std::list<int> l; } -! - if test -z "`${CXX} -c conftest.cc 2>&1`"; then - echo "$ac_t""yes" 1>&6 - else - AC_DEFINE(CMAKE_NO_ANSI_STREAM_HEADERS) - echo "$ac_t""no" 1>&6 - fi -fi - - -if test "$CC" = "gcc" -o `$CC -v 2>&1 | grep -c gcc` != "0" ; then - SHLIB_CFLAGS="-fPIC" -fi - -# find make to use to build cmake, prefer gmake -AC_PATH_PROGS(RUNMAKE, gmake make) -AC_PATH_PROGS(CMAKE_AR, ar) -AC_SUBST(CMAKE_AR) - -# generate output files. -# create mkdir files just to make some of the directories - -AC_OUTPUT( -CMakeSystemConfig.cmake:CMake/CMakeSystemConfig.cmake.in -CMake/makedir:CMake/dummy.in -CMake/Source/Makefile -) - -# build the CMakeBuildTargets program -(cd CMake/Source; $RUNMAKE CMakeBuildTargets) - -# run CMakeBuildTargets in make cache mode so the -# cache file can have the most recent changes from configure -# in it. -echo CMake/Source/CMakeBuildTargets ${fullSrcDir}/CMakeLists.txt -MakeCache -S${fullSrcDir} -O${CMAKE_CONFIG_DIR} -H${fullSrcDir} -B${CMAKE_CONFIG_DIR} -CMake/Source/CMakeBuildTargets ${fullSrcDir}/CMakeLists.txt -MakeCache -S${fullSrcDir} -O${CMAKE_CONFIG_DIR} -H${fullSrcDir} -B${CMAKE_CONFIG_DIR} -DRUN_CONFIGURE - -echo CMakeCache.txt location: ${CMAKE_CONFIG_DIR}/CMakeCache.txt - - |