summaryrefslogtreecommitdiffstats
path: root/Modules/FindCURL.cmake
Commit message (Collapse)AuthorAgeFilesLines
* FindCURL: Fix version string in case of multiple curl installationsGeorg Lutz2022-07-271-2/+1
| | | | | | | | | | | | | | On systems where there are two versions of libcurl installed CURL_VERSION_STRING is always set to the version found by the `pkg_check_modules(PC_CURL QUIET libcurl)`. But CURL_VERSION_STRING should match the libs and include paths found by `find_path` and `find_library` (more specifically the path where the header is found, because that where the version is parsed from. So make sure that the version is always parsed from the header file, use the output of pkg_check_modules only as HINT for find_path / find_library.
* FindCURL: Set CURL_VERSION_STRING when curl is found as a packagemakise-homura2022-06-281-0/+2
| | | | | | | FindCURL, when found as `curl-config.cmake`, will fill `CURL_VERSION` instead of `CURL_VERSION_STRING` variable. It may break some cases when user is relying on correct value of the latter variable, and as an example, already breaks `CMakeOnly.AllFindModules` test.
* Help: Add `.. versionadded` directives to module docsNikita Nemkin2020-12-021-2/+12
| | | | Issue: #19715
* Merge topic 'FindCURL-list-index-if'Brad King2020-07-291-3/+3
|\ | | | | | | | | | | | | 0faedae335 FindCURL: Fix list index check after search Acked-by: Kitware Robot <kwrobot@kitware.com> Merge-request: !5070
| * FindCURL: Fix list index check after searchMike Gelfand2020-07-281-3/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Fix logic added by commit fc5afbe970 (FindCURL: support COMPONENTS to check features, 2018-11-28, v3.14.0-rc1~287^2~2). When searching for particular components and `curl-config` reports one of the components being searched for first in the list, `find_package` fails. This is due to the check that treats non-zero index in the list as success and zero index as failure, while documentation on `list(FIND)` states that failure to find an element results in return value of -1 (not 0). I'm hitting this when building cURL with support for HTTP and HTTPS protocols only, and then trying to `find_package(CURL COMPONENTS HTTP HTTPS)`. I'm using `if(NOT x EQUAL -1)` check form as it appears to be the most used throughout the modules. While fixing this issue I've looked through all the uses of `list(FIND)` in other modules but wasn't able to find improper use except here.
* | FindCURL use NAMES_PER_DIRSibi Siddharthan2020-07-011-0/+2
|/ | | | Signed-off-by: Sibi Siddharthan <sibisiddharthan.github@gmail.com>
* FindCURL: Try to find CURLConfig.cmakeCharles Barto2019-10-151-1/+27
|
* Help: Improve description of modulesBartosz Kosiorek2019-04-231-4/+4
|
* FindCURL: fix component failure when no pkg-configHiroshi Miura2019-01-211-2/+2
| | | | | | | | find_package(CURL COMPONENTS foo) fails when there is no pkg-config module because of variable name typo. Signed-off-by: Hiroshi Miura <miurahr@linux.com> Fixes: #18802
* FindCURL: support COMPONENTS to check featuresHiroshi Miura2018-12-061-4/+73
| | | | | | | | - Use pkg-config or curl-config to retrieve version, supported features and protocols. - Support optional COMPONENTS to check supported features Signed-off-by: Hiroshi Miura <miurahr@linux.com>
* Help: Convert remaining modules to block-style commentsKitware Robot2018-10-221-28/+29
|
* FindCURL: Find debug and release variants separatelyHiroshi Miura2018-07-031-13/+43
| | | | Fixes: #17887
* FindCURL: Improve CURL::libcurl property code layoutHiroshi Miura2018-07-031-2/+4
|
* FindCURL: Rename imported target to match upstream CURLBrad King2018-06-181-5/+5
| | | | | | | | | | | Upstream CURL provides imported target `CURL::libcurl`. Rename the target added by `FindCURL` to match. We don't need compatibility with the old name because it has never been in a CMake release (except a 3.12 release candidate). Suggested-by: Jakub Zakrzewski <slither.jz@gmail.com> Acked-by: Rolf Eike Beer <eike@sf-mail.de> Fixes: #18091
* FindCURL: Revise documentation markupBrad King2018-03-071-7/+15
|
* FindCURL: provide imported target CURL::CURLRolf Eike Beer2018-03-061-0/+12
|
* Find*.cmake: drop the comments before including FPHSARolf Eike Beer2016-11-281-2/+0
| | | | | No need to explain this over and over again. While at it, do some other minor cleanups to whitespace and comments (i.e. delete them).
* Simplify CMake per-source license noticesBrad King2016-09-271-14/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | Per-source copyright/license notice headers that spell out copyright holder names and years are hard to maintain and often out-of-date or plain wrong. Precise contributor information is already maintained automatically by the version control tool. Ultimately it is the receiver of a file who is responsible for determining its licensing status, and per-source notices are merely a convenience. Therefore it is simpler and more accurate for each source to have a generic notice of the license name and references to more detailed information on copyright holders and full license terms. Our `Copyright.txt` file now contains a list of Contributors whose names appeared source-level copyright notices. It also references version control history for more precise information. Therefore we no longer need to spell out the list of Contributors in each source file notice. Replace CMake per-source copyright/license notice headers with a short description of the license and links to `Copyright.txt` and online information available from "https://cmake.org/licensing". The online URL also handles cases of modules being copied out of our source into other projects, so we can drop our notices about replacing links with full license text. Run the `Utilities/Scripts/filter-notices.bash` script to perform the majority of the replacements mechanically. Manually fix up shebang lines and trailing newlines in a few files. Manually update the notices in a few files that the script does not handle.
* Convert builtin help to reStructuredText source filesKitware Robot2013-10-151-5/+12
| | | | | | | | Run the convert-help.bash script to convert documentation: ./convert-help.bash "/path/to/CMake-build/bin" Then remove it.
* FindCURL: Find older MSVC prebuiltsAndreas Mohr2012-10-011-1/+3
| | | | Older Windows MSVC CURL prebuilts have the .lib named as "libcurl.lib".
* Remove CMake-language block-end command argumentsKitware Robot2012-08-131-2/+2
| | | | | | | | | | | | | | | | | Ancient versions of CMake required else(), endif(), and similar block termination commands to have arguments matching the command starting the block. This is no longer the preferred style. Run the following shell code: for c in else endif endforeach endfunction endmacro endwhile; do echo 's/\b'"$c"'\(\s*\)(.\+)/'"$c"'\1()/' done >convert.sed && git ls-files -z -- bootstrap '*.cmake' '*.cmake.in' '*CMakeLists.txt' | egrep -z -v '^(Utilities/cm|Source/kwsys/)' | egrep -z -v 'Tests/CMakeTests/While-Endwhile-' | xargs -0 sed -i -f convert.sed && rm convert.sed
* Convert CMake-language commands to lower caseKitware Robot2012-08-131-19/+19
| | | | | | | | | | | | | | | | | Ancient CMake versions required upper-case commands. Later command names became case-insensitive. Now the preferred style is lower-case. Run the following shell code: cmake --help-command-list | grep -v "cmake version" | while read c; do echo 's/\b'"$(echo $c | tr '[:lower:]' '[:upper:]')"'\(\s*\)(/'"$c"'\1(/g' done >convert.sed && git ls-files -z -- bootstrap '*.cmake' '*.cmake.in' '*CMakeLists.txt' | egrep -z -v '^(Utilities/cm|Source/kwsys/)' | xargs -0 sed -i -f convert.sed && rm convert.sed
* Remove trailing whitespace from most CMake and C/C++ codeKitware Robot2012-08-131-2/+2
| | | | | | | | | | | | | | | | | Our Git commit hooks disallow modification or addition of lines with trailing whitespace. Wipe out all remnants of trailing whitespace everywhere except third-party code. Run the following shell code: git ls-files -z -- \ bootstrap doxygen.config '*.readme' \ '*.c' '*.cmake' '*.cpp' '*.cxx' \ '*.el' '*.f' '*.f90' '*.h' '*.in' '*.in.l' '*.java' \ '*.mm' '*.pike' '*.py' '*.txt' '*.vim' | egrep -z -v '^(Utilities/cm|Source/(kwsys|CursesDialog/form)/)' | egrep -z -v '^(Modules/CPack\..*\.in)' | xargs -0 sed -i 's/ \+$//'
* FindCURL: detect version number also for older versionsRolf Eike Beer2012-01-261-4/+9
| | | | | Older versions of cURL do not have a curlver.h, but have the version define directly in curl.h.
* FindCURL: support version selectionRolf Eike Beer2012-01-231-4/+15
|
* Modules: Include builtin FindPackageHandleStandardArgs directlyBrad King2011-01-201-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The FindPackageHandleStandardArgs module was originally created outside of CMake. It was added for CMake 2.6.0 by commit e118a627 (add a macro FIND_PACKAGE_HANDLE_STANDARD_ARGS..., 2007-07-18). However, it also proliferated into a number of other projects that at the time required only CMake 2.4 and thus could not depend on CMake to provide the module. CMake's own find modules started using the module in commit b5f656e0 (use the new FIND_PACKAGE_HANDLE_STANDARD_ARGS in some of the FindXXX modules..., 2007-07-18). Then commit d358cf5c (add 2nd, more powerful mode to find_package_handle_standard_args, 2010-07-29) added a new feature to the interface of the module that was fully optional and backward compatible with all existing users of the module. Later commit 5f183caa (FindZLIB: use the FPHSA version mode, 2010-08-04) and others shortly thereafter started using the new interface in CMake's own find modules. This change was also backward compatible because it was only an implementation detail within each module. Unforutnately these changes introduced a problem for projects that still have an old copy of FindPackageHandleStandardArgs in CMAKE_MODULE_PATH. When any such project uses one of CMake's builtin find modules the line include(FindPackageHandleStandardArgs) loads the copy from the project which does not have the new interface! Then the including find module tries to use the new interface with the old module and fails. Whether this breakage can be considered a backward incompatible change in CMake is debatable. The situation is analagous to copying a standard library header from one version of a compiler into a project and then observing problems when the next version of the compiler reports errors in its other headers that depend on its new version of the original header. Nevertheless it is a change to CMake that causes problems for projects that worked with previous versions. This problem was discovered during the 2.8.3 release candidate cycle. It is an instance of a more general problem with projects that provide their own versions of CMake modules when other CMake modules depend on them. At the time we resolved this instance of the problem with commit b0118402 (Use absolute path to FindPackageHandleStandardArgs.cmake everywhere, 2010-09-28) for the 2.8.3 release. In order to address the more general problem we introduced policy CMP0017 in commit db44848f (Prefer files from CMAKE_ROOT when including from CMAKE_ROOT, 2010-11-17). That change was followed by commit ce28737c (Remove usage of CMAKE_CURRENT_LIST_DIR now that we have CMP0017, 2010-12-20) which reverted the original workaround in favor of using the policy. However, existing project releases do not set the policy behavior to NEW and therefore still exhibit the problem. We introduced in commit a364daf1 (Allow users to specify defaults for unset policies, 2011-01-03) an option for users to build existing projects by adding -DCMAKE_POLICY_DEFAULT_CMP0017=NEW to the command line. Unfortunately this solution still does not allow such projects to build out of the box, and there is no good way to suggest the use of the new option. The only remaining solution to keep existing projects that exhibit this problem building is to restore the change originally made in commit b0118402 (Use absolute path to FindPackageHandleStandardArgs.cmake everywhere, 2010-09-28). This also avoids policy CMP0017 warnings for this particular instance of the problem the policy addresses.
* Remove usage of CMAKE_CURRENT_LIST_DIR now that we have CMP0017Alex Neundorf2011-01-041-1/+1
| | | | | | | | This puts the new search behaviour for included files in action, i.e. now when a file from Modules/ include()s another file, it also gets the one from Modules/ included, i.e. the one it expects. Alex
* Use absolute path to FindPackageHandleStandardArgs.cmake everywhereAlex Neundorf2010-09-281-1/+1
| | | | | | | This is to avoid getting an (older) copy of FPHSA.cmake which is e.g. installed with KDE 4.5.0 and 4.5.1. Alex
* Modules: Fix spelling 'To distributed' -> 'To distribute'Todd Gamblin2010-08-091-1/+1
|
* Fixes issue #9862 by adding official msvc import library names to FindCURLPhilip Lowman2010-01-051-4/+7
|
* Convert CMake find-modules to BSD LicenseBrad King2009-09-281-0/+13
| | | | | | | This adds copyright/license notification blocks CMake's find-modules. Many of the modules had no notices at all. Some had notices referring to the BSD license already. This commit normalizes existing notices and adds missing notices.
* ENH: add second failure message parameter toAlexander Neundorf2007-07-231-1/+1
| | | | | | | | FIND_PACKAGE_HANDLE_STANDARD_ARGS(), so cmake modules can specify their own better failure messages. If the default is ok use "DEFAULT_MSG". Do this also for FindBoost.cmake (#5349) Alex
* ENH: use the new FIND_PACKAGE_HANDLE_STANDARD_ARGS() macro in most of theAlexander Neundorf2007-07-191-22/+7
| | | | | | | not-too-complicated modules -remove unnecessary default search paths used in the FIND_XXX() calls Alex
* BUG: honor REQUIRED and QUIETLY (#5312)Alexander Neundorf2007-07-121-9/+13
| | | | Alex
* ENH: Find module for CURL library.Brad King2006-10-191-0/+38
generated by cgit v0.12 at 2024-11-11 15:04:28 (GMT)