From 8d32d229a3b77f7cb0dd708c6a492fa33797b9f0 Mon Sep 17 00:00:00 2001 From: Ken Martin Date: Wed, 10 Oct 2007 11:47:43 -0400 Subject: ENH: make commands lower case by default --- Source/cmAddCustomCommandCommand.h | 8 ++-- Source/cmAddCustomTargetCommand.h | 6 +-- Source/cmAddDefinitionsCommand.h | 4 +- Source/cmAddDependenciesCommand.h | 4 +- Source/cmAddExecutableCommand.h | 4 +- Source/cmAddLibraryCommand.h | 4 +- Source/cmAddSubDirectoryCommand.h | 4 +- Source/cmAddTestCommand.h | 4 +- Source/cmAuxSourceDirectoryCommand.h | 4 +- Source/cmBuildCommand.h | 4 +- Source/cmBuildNameCommand.h | 4 +- Source/cmCMakeMinimumRequired.h | 4 +- Source/cmConfigureFileCommand.h | 4 +- Source/cmCreateTestSourceList.h | 4 +- Source/cmDefinePropertyCommand.h | 4 +- Source/cmDocumentation.cxx | 4 +- Source/cmElseCommand.h | 8 ++-- Source/cmElseIfCommand.h | 8 ++-- Source/cmEnableLanguageCommand.h | 4 +- Source/cmEnableTestingCommand.h | 6 +-- Source/cmEndForEachCommand.h | 4 +- Source/cmEndIfCommand.h | 8 ++-- Source/cmEndMacroCommand.h | 8 ++-- Source/cmEndWhileCommand.h | 8 ++-- Source/cmExecProgramCommand.h | 6 +-- Source/cmExecuteProcessCommand.h | 8 ++-- Source/cmExportCommand.h | 4 +- Source/cmExportLibraryDependencies.h | 4 +- Source/cmFLTKWrapUICommand.h | 4 +- Source/cmFileCommand.h | 43 +++++++++--------- Source/cmFindFileCommand.cxx | 2 +- Source/cmFindFileCommand.h | 2 +- Source/cmFindLibraryCommand.cxx | 2 +- Source/cmFindLibraryCommand.h | 2 +- Source/cmFindPackageCommand.h | 4 +- Source/cmFindPathCommand.cxx | 2 +- Source/cmFindPathCommand.h | 2 +- Source/cmFindProgramCommand.cxx | 2 +- Source/cmFindProgramCommand.h | 2 +- Source/cmForEachCommand.h | 16 +++---- Source/cmGetCMakePropertyCommand.h | 4 +- Source/cmGetDirectoryPropertyCommand.h | 4 +- Source/cmGetFilenameComponentCommand.h | 6 +-- Source/cmGetPropertyCommand.h | 4 +- Source/cmGetSourceFilePropertyCommand.h | 6 +-- Source/cmGetTargetPropertyCommand.h | 6 +-- Source/cmGetTestPropertyCommand.h | 4 +- Source/cmIfCommand.h | 72 +++++++++++++++--------------- Source/cmIncludeCommand.h | 8 ++-- Source/cmIncludeDirectoryCommand.h | 6 +-- Source/cmIncludeExternalMSProjectCommand.h | 4 +- Source/cmIncludeRegularExpressionCommand.h | 4 +- Source/cmInstallCommand.h | 20 ++++----- Source/cmInstallFilesCommand.h | 16 +++---- Source/cmInstallProgramsCommand.h | 12 ++--- Source/cmInstallTargetsCommand.h | 8 ++-- Source/cmLinkDirectoriesCommand.h | 4 +- Source/cmLinkLibrariesCommand.h | 10 ++--- Source/cmListCommand.h | 20 ++++----- Source/cmLoadCacheCommand.h | 6 +-- Source/cmLoadCommandCommand.h | 4 +- Source/cmMacroCommand.h | 10 ++--- Source/cmMakeDirectoryCommand.h | 6 +-- Source/cmMarkAsAdvancedCommand.h | 6 +-- Source/cmMathCommand.h | 4 +- Source/cmMessageCommand.h | 4 +- Source/cmOptionCommand.h | 4 +- Source/cmOutputRequiredFilesCommand.h | 4 +- Source/cmProjectCommand.h | 4 +- Source/cmQTWrapCPPCommand.h | 4 +- Source/cmQTWrapUICommand.h | 4 +- Source/cmRemoveCommand.h | 6 +-- Source/cmRemoveDefinitionsCommand.h | 4 +- Source/cmSeparateArgumentsCommand.h | 4 +- Source/cmSetCommand.h | 8 ++-- Source/cmSetDirectoryPropertiesCommand.h | 4 +- Source/cmSetPropertiesCommand.h | 4 +- Source/cmSetSourceFilesPropertiesCommand.h | 4 +- Source/cmSetTargetPropertiesCommand.h | 4 +- Source/cmSetTestsPropertiesCommand.h | 4 +- Source/cmSiteNameCommand.h | 4 +- Source/cmSourceGroupCommand.h | 8 ++-- Source/cmStringCommand.h | 34 +++++++------- Source/cmSubdirCommand.h | 10 ++--- Source/cmSubdirDependsCommand.h | 4 +- Source/cmTargetLinkLibrariesCommand.h | 4 +- Source/cmTryCompileCommand.h | 18 ++++---- Source/cmTryRunCommand.h | 12 ++--- Source/cmUseMangledMesaCommand.h | 4 +- Source/cmUtilitySourceCommand.h | 6 +-- Source/cmVariableRequiresCommand.h | 6 +-- Source/cmVariableWatchCommand.h | 4 +- Source/cmWhileCommand.h | 10 ++--- Source/cmWriteFileCommand.h | 14 +++--- Tests/CommandLineTest/CMakeLists.txt | 4 +- 95 files changed, 345 insertions(+), 346 deletions(-) diff --git a/Source/cmAddCustomCommandCommand.h b/Source/cmAddCustomCommandCommand.h index 845c594..31dc2ac 100644 --- a/Source/cmAddCustomCommandCommand.h +++ b/Source/cmAddCustomCommandCommand.h @@ -47,7 +47,7 @@ public: /** * The name of the command as specified in CMakeList.txt. */ - virtual const char* GetName() {return "ADD_CUSTOM_COMMAND";} + virtual const char* GetName() {return "add_custom_command";} /** * Succinct documentation. @@ -63,10 +63,10 @@ public: virtual const char* GetFullDocumentation() { return - "There are two main signatures for ADD_CUSTOM_COMMAND " + "There are two main signatures for add_custom_command " "The first signature is for adding a custom command " "to produce an output.\n" - " ADD_CUSTOM_COMMAND(OUTPUT output1 [output2 ...]\n" + " add_custom_command(OUTPUT output1 [output2 ...]\n" " COMMAND command1 [ARGS] [args1...]\n" " [COMMAND command2 [ARGS] [args2...] ...]\n" " [MAIN_DEPENDENCY depend]\n" @@ -92,7 +92,7 @@ public: "The command becomes part of the target and will only execute " "when the target itself is built. If the target is already built," " the command will not execute.\n" - " ADD_CUSTOM_COMMAND(TARGET target\n" + " add_custom_command(TARGET target\n" " PRE_BUILD | PRE_LINK | POST_BUILD\n" " COMMAND command1 [ARGS] [args1...]\n" " [COMMAND command2 [ARGS] [args2...] ...]\n" diff --git a/Source/cmAddCustomTargetCommand.h b/Source/cmAddCustomTargetCommand.h index b8808b8..f9da054 100644 --- a/Source/cmAddCustomTargetCommand.h +++ b/Source/cmAddCustomTargetCommand.h @@ -47,7 +47,7 @@ public: * The name of the command as specified in CMakeList.txt. */ virtual const char* GetName() - {return "ADD_CUSTOM_TARGET";} + {return "add_custom_target";} /** * Succinct documentation. @@ -63,7 +63,7 @@ public: virtual const char* GetFullDocumentation() { return - " ADD_CUSTOM_TARGET(Name [ALL] [command1 [args1...]]\n" + " add_custom_target(Name [ALL] [command1 [args1...]]\n" " [COMMAND command2 [args2...] ...]\n" " [DEPENDS depend depend depend ... ]\n" " [WORKING_DIRECTORY dir]\n" @@ -89,7 +89,7 @@ public: "If VERBATIM is given then all the arguments to the commands will be " "passed exactly as specified no matter the build tool used. " "Note that one level of escapes is still used by the CMake language " - "processor before ADD_CUSTOM_TARGET even sees the arguments. " + "processor before add_custom_target even sees the arguments. " "Use of VERBATIM is recommended as it enables correct behavior. " "When VERBATIM is not given the behavior is platform specific. " "In the future VERBATIM may be enabled by default. The only reason " diff --git a/Source/cmAddDefinitionsCommand.h b/Source/cmAddDefinitionsCommand.h index cd4343e..7bf7116 100644 --- a/Source/cmAddDefinitionsCommand.h +++ b/Source/cmAddDefinitionsCommand.h @@ -45,7 +45,7 @@ public: /** * The name of the command as specified in CMakeList.txt. */ - virtual const char* GetName() {return "ADD_DEFINITIONS";} + virtual const char* GetName() {return "add_definitions";} /** * Succinct documentation. @@ -61,7 +61,7 @@ public: virtual const char* GetFullDocumentation() { return - " ADD_DEFINITIONS(-DFOO -DBAR ...)\n" + " add_definitions(-DFOO -DBAR ...)\n" "Adds flags to command line of C and C++ compilers. " "This command can be used to add any flag to a compile line, " "but the -D flag is accepted most C/C++ compilers. " diff --git a/Source/cmAddDependenciesCommand.h b/Source/cmAddDependenciesCommand.h index 2e83af0..3c8147b 100644 --- a/Source/cmAddDependenciesCommand.h +++ b/Source/cmAddDependenciesCommand.h @@ -44,7 +44,7 @@ public: /** * The name of the command as specified in CMakeList.txt. */ - virtual const char* GetName() { return "ADD_DEPENDENCIES";} + virtual const char* GetName() { return "add_dependencies";} /** * Succinct documentation. @@ -60,7 +60,7 @@ public: virtual const char* GetFullDocumentation() { return - " ADD_DEPENDENCIES(target-name depend-target1\n" + " add_dependencies(target-name depend-target1\n" " depend-target2 ...)\n" "Make a top-level target depend on other top-level targets. A " "top-level target is one created by ADD_EXECUTABLE, ADD_LIBRARY, " diff --git a/Source/cmAddExecutableCommand.h b/Source/cmAddExecutableCommand.h index bef409e..2e78742 100644 --- a/Source/cmAddExecutableCommand.h +++ b/Source/cmAddExecutableCommand.h @@ -45,7 +45,7 @@ public: /** * The name of the command as specified in CMakeList.txt. */ - virtual const char* GetName() { return "ADD_EXECUTABLE";} + virtual const char* GetName() { return "add_executable";} /** * Succinct documentation. @@ -62,7 +62,7 @@ public: virtual const char* GetFullDocumentation() { return - " ADD_EXECUTABLE(exename [WIN32] [MACOSX_BUNDLE] [EXCLUDE_FROM_ALL]\n" + " add_executable(exename [WIN32] [MACOSX_BUNDLE] [EXCLUDE_FROM_ALL]\n" " source1 source2 ... sourceN)\n" "This command adds an executable target to the current directory. " "The executable will be built from the list of source files " diff --git a/Source/cmAddLibraryCommand.h b/Source/cmAddLibraryCommand.h index b128a08..e9d8f2f 100644 --- a/Source/cmAddLibraryCommand.h +++ b/Source/cmAddLibraryCommand.h @@ -45,7 +45,7 @@ public: /** * The name of the command as specified in CMakeList.txt. */ - virtual const char* GetName() { return "ADD_LIBRARY";} + virtual const char* GetName() { return "add_library";} /** * Succinct documentation. @@ -61,7 +61,7 @@ public: virtual const char* GetFullDocumentation() { return - " ADD_LIBRARY(libname [SHARED | STATIC | MODULE] [EXCLUDE_FROM_ALL]\n" + " add_library(libname [SHARED | STATIC | MODULE] [EXCLUDE_FROM_ALL]\n" " source1 source2 ... sourceN)\n" "Adds a library target. SHARED, STATIC or MODULE keywords are used " "to set the library type. If the keyword MODULE appears, the library " diff --git a/Source/cmAddSubDirectoryCommand.h b/Source/cmAddSubDirectoryCommand.h index f4b0d0b..ca09858 100644 --- a/Source/cmAddSubDirectoryCommand.h +++ b/Source/cmAddSubDirectoryCommand.h @@ -46,7 +46,7 @@ public: /** * The name of the command as specified in CMakeList.txt. */ - virtual const char* GetName() { return "ADD_SUBDIRECTORY";} + virtual const char* GetName() { return "add_subdirectory";} /** * Succinct documentation. @@ -62,7 +62,7 @@ public: virtual const char* GetFullDocumentation() { return - " ADD_SUBDIRECTORY(source_dir [binary_dir] \n" + " add_subdirectory(source_dir [binary_dir] \n" " [EXCLUDE_FROM_ALL])\n" "Add a subdirectory to the build. The source_dir specifies the " "directory in which the source CmakeLists.txt and code files are " diff --git a/Source/cmAddTestCommand.h b/Source/cmAddTestCommand.h index 998f922..22f4412 100644 --- a/Source/cmAddTestCommand.h +++ b/Source/cmAddTestCommand.h @@ -44,7 +44,7 @@ public: /** * The name of the command as specified in CMakeList.txt. */ - virtual const char* GetName() { return "ADD_TEST";} + virtual const char* GetName() { return "add_test";} /** * Succinct documentation. @@ -60,7 +60,7 @@ public: virtual const char* GetFullDocumentation() { return - " ADD_TEST(testname Exename arg1 arg2 ...)\n" + " add_test(testname Exename arg1 arg2 ...)\n" "If the ENABLE_TESTING command has been run, this command adds a " "test target to the current directory. If ENABLE_TESTING has not " "been run, this command does nothing. " diff --git a/Source/cmAuxSourceDirectoryCommand.h b/Source/cmAuxSourceDirectoryCommand.h index 09fc5f8..63b8cb3 100644 --- a/Source/cmAuxSourceDirectoryCommand.h +++ b/Source/cmAuxSourceDirectoryCommand.h @@ -48,7 +48,7 @@ public: /** * The name of the command as specified in CMakeList.txt. */ - virtual const char* GetName() { return "AUX_SOURCE_DIRECTORY";} + virtual const char* GetName() { return "aux_source_directory";} /** * Succinct documentation. @@ -64,7 +64,7 @@ public: virtual const char* GetFullDocumentation() { return - " AUX_SOURCE_DIRECTORY(dir VARIABLE)\n" + " aux_source_directory(dir VARIABLE)\n" "Collects the names of all the source files in the specified " "directory and stores the list in the variable provided. This " "command is intended to be used by projects that use explicit " diff --git a/Source/cmBuildCommand.h b/Source/cmBuildCommand.h index 255f474..714b8af 100644 --- a/Source/cmBuildCommand.h +++ b/Source/cmBuildCommand.h @@ -44,7 +44,7 @@ public: /** * The name of the command as specified in CMakeList.txt. */ - virtual const char* GetName() {return "BUILD_COMMAND";} + virtual const char* GetName() {return "build_command";} /** * Succinct documentation. @@ -60,7 +60,7 @@ public: virtual const char* GetFullDocumentation() { return - " BUILD_COMMAND(variable MAKECOMMAND)\n" + " build_command(variable MAKECOMMAND)\n" "Sets the given variable to a string containing the command that " "will build this project from the root of the build tree using the " "build tool given by MAKECOMMAND. MAKECOMMAND should be msdev, " diff --git a/Source/cmBuildNameCommand.h b/Source/cmBuildNameCommand.h index b7f29c5..c60fc19 100644 --- a/Source/cmBuildNameCommand.h +++ b/Source/cmBuildNameCommand.h @@ -49,7 +49,7 @@ public: /** * The name of the command as specified in CMakeList.txt. */ - virtual const char* GetName() {return "BUILD_NAME";} + virtual const char* GetName() {return "build_name";} /** * Succinct documentation. @@ -66,7 +66,7 @@ public: virtual const char* GetFullDocumentation() { return - " BUILD_NAME(variable)\n" + " build_name(variable)\n" "Sets the specified variable to a string representing the platform " "and compiler settings. These values are now available through the " "CMAKE_SYSTEM and CMAKE_CXX_COMPILER variables."; diff --git a/Source/cmCMakeMinimumRequired.h b/Source/cmCMakeMinimumRequired.h index 402e289..736e487 100644 --- a/Source/cmCMakeMinimumRequired.h +++ b/Source/cmCMakeMinimumRequired.h @@ -49,7 +49,7 @@ public: /** * The name of the command as specified in CMakeList.txt. */ - virtual const char* GetName() {return "CMAKE_MINIMUM_REQUIRED";} + virtual const char* GetName() {return "cmake_minimum_required";} /** * Succinct documentation. @@ -65,7 +65,7 @@ public: virtual const char* GetFullDocumentation() { return - " CMAKE_MINIMUM_REQUIRED(VERSION versionNumber [FATAL_ERROR])\n" + " cmake_minimum_required(VERSION versionNumber [FATAL_ERROR])\n" "Let cmake know that the project requires a certain version of a " "cmake, or newer. CMake will also try to be backwards compatible to " "the version of cmake specified, if a newer version of cmake is " diff --git a/Source/cmConfigureFileCommand.h b/Source/cmConfigureFileCommand.h index ce0a5cd..90228eb 100644 --- a/Source/cmConfigureFileCommand.h +++ b/Source/cmConfigureFileCommand.h @@ -38,7 +38,7 @@ public: /** * The name of the command as specified in CMakeList.txt. */ - virtual const char* GetName() { return "CONFIGURE_FILE";} + virtual const char* GetName() { return "configure_file";} /** * This determines if the command is invoked when in script mode. @@ -59,7 +59,7 @@ public: virtual const char* GetFullDocumentation() { return - " CONFIGURE_FILE(InputFile OutputFile\n" + " configure_file(InputFile OutputFile\n" " [COPYONLY] [ESCAPE_QUOTES] [@ONLY])\n" "The Input and Ouput files have to have full paths. " "This command replaces any variables in the input file referenced as " diff --git a/Source/cmCreateTestSourceList.h b/Source/cmCreateTestSourceList.h index b484c08..ff1a9e7 100644 --- a/Source/cmCreateTestSourceList.h +++ b/Source/cmCreateTestSourceList.h @@ -44,7 +44,7 @@ public: /** * The name of the command as specified in CMakeList.txt. */ - virtual const char* GetName() {return "CREATE_TEST_SOURCELIST";} + virtual const char* GetName() {return "create_test_sourcelist";} /** * Succinct documentation. @@ -60,7 +60,7 @@ public: virtual const char* GetFullDocumentation() { return - " CREATE_TEST_SOURCELIST(SourceListName DriverName\n" + " create_test_sourcelist(SourceListName DriverName\n" " test1 test2 test3\n" " EXTRA_INCLUDE include.h\n" " FUNCTION function)\n" diff --git a/Source/cmDefinePropertyCommand.h b/Source/cmDefinePropertyCommand.h index 0cc1f31..5da7b34 100644 --- a/Source/cmDefinePropertyCommand.h +++ b/Source/cmDefinePropertyCommand.h @@ -36,7 +36,7 @@ public: /** * The name of the command as specified in CMakeList.txt. */ - virtual const char* GetName() { return "DEFINE_PROPERTY";} + virtual const char* GetName() { return "define_property";} /** * Succinct documentation. @@ -52,7 +52,7 @@ public: virtual const char* GetFullDocumentation() { return - " DEFINE_PROPERTY(property_name scope_value\n" + " define_property(property_name scope_value\n" " short_description\n" " full_description inherit)\n" "Define a property for a scope. scope_value is either GLOBAL, " diff --git a/Source/cmDocumentation.cxx b/Source/cmDocumentation.cxx index 6c54254..a521cc7 100644 --- a/Source/cmDocumentation.cxx +++ b/Source/cmDocumentation.cxx @@ -696,7 +696,7 @@ bool cmDocumentation::CheckOptions(int argc, const char* const* argv) help.HelpType = cmDocumentation::Usage; help.HelpForm = cmDocumentation::UsageForm; GET_OPT_ARGUMENT(help.Argument); - help.Argument = cmSystemTools::UpperCase(help.Argument); + help.Argument = cmSystemTools::LowerCase(help.Argument); // special case for single command if (!help.Argument.empty()) { @@ -756,7 +756,7 @@ bool cmDocumentation::CheckOptions(int argc, const char* const* argv) help.HelpType = cmDocumentation::Single; GET_OPT_ARGUMENT(help.Argument); GET_OPT_ARGUMENT(help.Filename); - help.Argument = cmSystemTools::UpperCase(help.Argument); + help.Argument = cmSystemTools::LowerCase(help.Argument); help.HelpForm = this->GetFormFromFilename(help.Filename); } else if(strcmp(argv[i], "--help-module") == 0) diff --git a/Source/cmElseCommand.h b/Source/cmElseCommand.h index e3d7e99..41b5bf9 100644 --- a/Source/cmElseCommand.h +++ b/Source/cmElseCommand.h @@ -49,14 +49,14 @@ public: /** * The name of the command as specified in CMakeList.txt. */ - virtual const char* GetName() { return "ELSE";} + virtual const char* GetName() { return "else";} /** * Succinct documentation. */ virtual const char* GetTerseDocumentation() { - return "Starts the ELSE portion of an IF block."; + return "Starts the else portion of an if block."; } /** @@ -65,8 +65,8 @@ public: virtual const char* GetFullDocumentation() { return - " ELSE(expression)\n" - "See the IF command."; + " else(expression)\n" + "See the if command."; } cmTypeMacro(cmElseCommand, cmCommand); diff --git a/Source/cmElseIfCommand.h b/Source/cmElseIfCommand.h index ca6b1f4..2d251e4 100644 --- a/Source/cmElseIfCommand.h +++ b/Source/cmElseIfCommand.h @@ -49,14 +49,14 @@ public: /** * The name of the command as specified in CMakeList.txt. */ - virtual const char* GetName() { return "ELSEIF";} + virtual const char* GetName() { return "elseif";} /** * Succinct documentation. */ virtual const char* GetTerseDocumentation() { - return "Starts the ELSEIF portion of an IF block."; + return "Starts the elseif portion of an if block."; } /** @@ -65,8 +65,8 @@ public: virtual const char* GetFullDocumentation() { return - " ELSEIF(expression)\n" - "See the IF command."; + " elseif(expression)\n" + "See the if command."; } cmTypeMacro(cmElseIfCommand, cmCommand); diff --git a/Source/cmEnableLanguageCommand.h b/Source/cmEnableLanguageCommand.h index c1c99d1..a542204 100644 --- a/Source/cmEnableLanguageCommand.h +++ b/Source/cmEnableLanguageCommand.h @@ -47,7 +47,7 @@ public: /** * The name of the command as specified in CMakeList.txt. */ - virtual const char* GetName() {return "ENABLE_LANGUAGE";} + virtual const char* GetName() {return "enable_language";} /** * Succinct documentation. @@ -63,7 +63,7 @@ public: virtual const char* GetFullDocumentation() { return - " ENABLE_LANGUAGE(languageName [OPTIONAL] )\n" + " enable_language(languageName [OPTIONAL] )\n" "This command enables support for the named language in CMake. " "This is the same as the project command but does not create " "any of the extra varaibles that are created by the project command. " diff --git a/Source/cmEnableTestingCommand.h b/Source/cmEnableTestingCommand.h index 8a2938d..a019088 100644 --- a/Source/cmEnableTestingCommand.h +++ b/Source/cmEnableTestingCommand.h @@ -52,7 +52,7 @@ public: /** * The name of the command as specified in CMakeList.txt. */ - virtual const char* GetName() { return "ENABLE_TESTING";} + virtual const char* GetName() { return "enable_testing";} /** * Succinct documentation. @@ -68,9 +68,9 @@ public: virtual const char* GetFullDocumentation() { return - " ENABLE_TESTING()\n" + " enable_testing()\n" "Enables testing for this directory and below. " - "See also the ADD_TEST command. Note that ctest expects to find " + "See also the add_test command. Note that ctest expects to find " "a test file in the build directory root. Therefore, this command " "should be in the source directory root."; } diff --git a/Source/cmEndForEachCommand.h b/Source/cmEndForEachCommand.h index 2f22e4f..03e1ef2 100644 --- a/Source/cmEndForEachCommand.h +++ b/Source/cmEndForEachCommand.h @@ -55,7 +55,7 @@ public: /** * The name of the command as specified in CMakeList.txt. */ - virtual const char* GetName() { return "ENDFOREACH";} + virtual const char* GetName() { return "endforeach";} /** * Succinct documentation. @@ -71,7 +71,7 @@ public: virtual const char* GetFullDocumentation() { return - " ENDFOREACH(expression)\n" + " endforeach(expression)\n" "See the FOREACH command."; } diff --git a/Source/cmEndIfCommand.h b/Source/cmEndIfCommand.h index 2092c61..846e991 100644 --- a/Source/cmEndIfCommand.h +++ b/Source/cmEndIfCommand.h @@ -49,14 +49,14 @@ public: /** * The name of the command as specified in CMakeList.txt. */ - virtual const char* GetName() { return "ENDIF";} + virtual const char* GetName() { return "endif";} /** * Succinct documentation. */ virtual const char* GetTerseDocumentation() { - return "Ends a list of commands in an IF block."; + return "Ends a list of commands in an if block."; } /** @@ -65,8 +65,8 @@ public: virtual const char* GetFullDocumentation() { return - " ENDIF(expression)\n" - "See the IF command."; + " endif(expression)\n" + "See the if command."; } cmTypeMacro(cmEndIfCommand, cmCommand); diff --git a/Source/cmEndMacroCommand.h b/Source/cmEndMacroCommand.h index be1467b..d0b0982 100644 --- a/Source/cmEndMacroCommand.h +++ b/Source/cmEndMacroCommand.h @@ -55,14 +55,14 @@ public: /** * The name of the command as specified in CMakeList.txt. */ - virtual const char* GetName() { return "ENDMACRO";} + virtual const char* GetName() { return "endmacro";} /** * Succinct documentation. */ virtual const char* GetTerseDocumentation() { - return "Ends a list of commands in a MACRO block."; + return "Ends a list of commands in a macro block."; } /** @@ -71,8 +71,8 @@ public: virtual const char* GetFullDocumentation() { return - " ENDMACRO(expression)\n" - "See the MACRO command."; + " endmacro(expression)\n" + "See the macro command."; } cmTypeMacro(cmEndMacroCommand, cmCommand); diff --git a/Source/cmEndWhileCommand.h b/Source/cmEndWhileCommand.h index 28f0a13..da0a917 100644 --- a/Source/cmEndWhileCommand.h +++ b/Source/cmEndWhileCommand.h @@ -55,14 +55,14 @@ public: /** * The name of the command as specified in CMakeList.txt. */ - virtual const char* GetName() { return "ENDWHILE";} + virtual const char* GetName() { return "endwhile";} /** * Succinct documentation. */ virtual const char* GetTerseDocumentation() { - return "Ends a list of commands in a WHILE block."; + return "Ends a list of commands in a while block."; } /** @@ -71,8 +71,8 @@ public: virtual const char* GetFullDocumentation() { return - " ENDWHILE(expression)\n" - "See the WHILE command."; + " endwhile(expression)\n" + "See the while command."; } cmTypeMacro(cmEndWhileCommand, cmCommand); diff --git a/Source/cmExecProgramCommand.h b/Source/cmExecProgramCommand.h index 1117561..a16c8f7 100644 --- a/Source/cmExecProgramCommand.h +++ b/Source/cmExecProgramCommand.h @@ -47,7 +47,7 @@ public: * The name of the command as specified in CMakeList.txt. */ virtual const char* GetName() - {return "EXEC_PROGRAM";} + {return "exec_program";} /** * This determines if the command is invoked when in script mode. @@ -60,7 +60,7 @@ public: virtual const char* GetTerseDocumentation() { return - "Deprecated. Use the EXECUTE_PROCESS() command instead."; + "Deprecated. Use the execute_process() command instead."; } /** @@ -71,7 +71,7 @@ public: return "Run an executable program during the processing of the CMakeList.txt" " file.\n" - " EXEC_PROGRAM(Executable [directory in which to run]\n" + " exec_program(Executable [directory in which to run]\n" " [ARGS ]\n" " [OUTPUT_VARIABLE ]\n" " [RETURN_VALUE ])\n" diff --git a/Source/cmExecuteProcessCommand.h b/Source/cmExecuteProcessCommand.h index a9286a7..8564e2b 100644 --- a/Source/cmExecuteProcessCommand.h +++ b/Source/cmExecuteProcessCommand.h @@ -46,7 +46,7 @@ public: * The name of the command as specified in CMakeList.txt. */ virtual const char* GetName() - {return "EXECUTE_PROCESS";} + {return "execute_process";} /** * This determines if the command is invoked when in script mode. @@ -67,7 +67,7 @@ public: virtual const char* GetFullDocumentation() { return - " EXECUTE_PROCESS(COMMAND [args1...]]\n" + " execute_process(COMMAND [args1...]]\n" " [COMMAND [args2...] [...]]\n" " [WORKING_DIRECTORY ]\n" " [TIMEOUT ]\n" @@ -106,8 +106,8 @@ public: "pipe the precedence is not specified. " "If no OUTPUT_* or ERROR_* options are given the output will be shared " "with the corresponding pipes of the CMake process itself.\n" - "The EXECUTE_PROCESS command is a newer more powerful version of " - "EXEC_PROGRAM, but the old command has been kept for compatibility." + "The execute_process command is a newer more powerful version of " + "exec_program, but the old command has been kept for compatibility." ; } diff --git a/Source/cmExportCommand.h b/Source/cmExportCommand.h index 22b5904..9382fcf 100644 --- a/Source/cmExportCommand.h +++ b/Source/cmExportCommand.h @@ -46,7 +46,7 @@ public: /** * The name of the command as specified in CMakeList.txt. */ - virtual const char* GetName() { return "EXPORT";} + virtual const char* GetName() { return "export";} /** * Succinct documentation. @@ -63,7 +63,7 @@ public: virtual const char* GetFullDocumentation() { return - " EXPORT(TARGETS tgt1 tgt2 ... [PREFIX ] FILE " + " export(TARGETS tgt1 tgt2 ... [PREFIX ] FILE " "[APPEND])\n" "Create a file that can be included into a CMake listfile with the " "INCLUDE command. The file will contain a number of SET commands " diff --git a/Source/cmExportLibraryDependencies.h b/Source/cmExportLibraryDependencies.h index 73a068f..8e23d2b 100644 --- a/Source/cmExportLibraryDependencies.h +++ b/Source/cmExportLibraryDependencies.h @@ -51,7 +51,7 @@ public: /** * The name of the command as specified in CMakeList.txt. */ - virtual const char* GetName() { return "EXPORT_LIBRARY_DEPENDENCIES";} + virtual const char* GetName() { return "export_library_dependencies";} /** * Succinct documentation. @@ -68,7 +68,7 @@ public: virtual const char* GetFullDocumentation() { return - " EXPORT_LIBRARY_DEPENDENCIES(FILE [APPEND])\n" + " export_library_dependencies(FILE [APPEND])\n" "Create a file that can be included into a CMake listfile with the " "INCLUDE command. The file will contain a number of SET commands " "that will set all the variables needed for library dependency " diff --git a/Source/cmFLTKWrapUICommand.h b/Source/cmFLTKWrapUICommand.h index e88e1b9..b383a91 100644 --- a/Source/cmFLTKWrapUICommand.h +++ b/Source/cmFLTKWrapUICommand.h @@ -55,7 +55,7 @@ public: /** * The name of the command as specified in CMakeList.txt. */ - virtual const char* GetName() { return "FLTK_WRAP_UI";} + virtual const char* GetName() { return "fltk_wrap_ui";} /** * Succinct documentation. @@ -71,7 +71,7 @@ public: virtual const char* GetFullDocumentation() { return - " FLTK_WRAP_UI(resultingLibraryName source1\n" + " fltk_wrap_ui(resultingLibraryName source1\n" " source2 ... sourceN )\n" "Produce .h and .cxx files for all the .fl and .fld files listed. " "The resulting .h and .cxx files will be added to a variable named " diff --git a/Source/cmFileCommand.h b/Source/cmFileCommand.h index c779cf3..b629df0 100644 --- a/Source/cmFileCommand.h +++ b/Source/cmFileCommand.h @@ -50,7 +50,7 @@ public: /** * The name of the command as specified in CMakeList.txt. */ - virtual const char* GetName() { return "FILE";} + virtual const char* GetName() { return "file";} /** * Succinct documentation. @@ -66,31 +66,31 @@ public: virtual const char* GetFullDocumentation() { return - " FILE(WRITE filename \"message to write\"... )\n" - " FILE(APPEND filename \"message to write\"... )\n" - " FILE(READ filename variable [LIMIT numBytes])\n" - " FILE(STRINGS filename variable [LIMIT_COUNT num]\n" + " file(WRITE filename \"message to write\"... )\n" + " file(APPEND filename \"message to write\"... )\n" + " file(READ filename variable [LIMIT numBytes])\n" + " file(STRINGS filename variable [LIMIT_COUNT num]\n" " [LIMIT_INPUT numBytes] [LIMIT_OUTPUT numBytes]\n" " [LENGTH_MINIMUM numBytes] [LENGTH_MAXIMUM numBytes]\n" " [NEWLINE_CONSUME] [REGEX regex]\n" " [NO_HEX_CONVERSION])\n" - " FILE(GLOB variable [RELATIVE path] [globbing expressions]...)\n" - " FILE(GLOB_RECURSE variable [RELATIVE path] \n" + " file(GLOB variable [RELATIVE path] [globbing expressions]...)\n" + " file(GLOB_RECURSE variable [RELATIVE path] \n" " [globbing expressions]...)\n" - " FILE(REMOVE [file1 ...])\n" - " FILE(REMOVE_RECURSE [file1 ...])\n" - " FILE(MAKE_DIRECTORY [directory1 directory2 ...])\n" - " FILE(RELATIVE_PATH variable directory file)\n" - " FILE(TO_CMAKE_PATH path result)\n" - " FILE(TO_NATIVE_PATH path result)\n" + " file(REMOVE [file1 ...])\n" + " file(REMOVE_RECURSE [file1 ...])\n" + " file(MAKE_DIRECTORY [directory1 directory2 ...])\n" + " file(RELATIVE_PATH variable directory file)\n" + " file(TO_CMAKE_PATH path result)\n" + " file(TO_NATIVE_PATH path result)\n" "WRITE will write a message into a file called 'filename'. It " "overwrites the file if it already exists, and creates the file " "if it does not exist.\n" "APPEND will write a message into a file same as WRITE, except " "it will append it to the end of the file\n" - "NOTE: When using FILE WRITE and FILE APPEND, the produced file " - "cannot be used as an input to CMake (CONFIGURE_FILE, source file ...) " - "because it will lead to an infinite loop. Use CONFIGURE_FILE if you " + "NOTE: When using file WRITE and file APPEND, the produced file " + "cannot be used as an input to CMake (configure_file, source file ...) " + "because it will lead to an infinite loop. Use configure_file if you " "want to generate input files to CMake.\n" "READ will read the content of a file and store it into the " "variable.\n" @@ -98,7 +98,7 @@ public: "store it in a variable. Binary data in the file are ignored. Carriage " "return (CR) characters are ignored. It works also for Intel Hex and " "Motorola S-record files, which are automatically converted to binary " - "format when reading them. Disable this using NO_HEX_CONVERSION.\n " + "format when reading them. Disable this using NO_HEX_CONVERSION.\n" "LIMIT_COUNT sets the maximum number of strings to return. " "LIMIT_INPUT sets the maximum number of bytes to read from " "the input file. " @@ -109,11 +109,10 @@ public: "LENGTH_MAXIMUM sets the maximum length of a string to return. Longer " "strings are split into strings no longer than the maximum length. " "NEWLINE_CONSUME allows newlines to be included in strings instead " - "of terminating them. " + "of terminating them.\n" "REGEX specifies a regular expression that a string must match to be " - "returned. " - "Typical usage \n" - " FILE(STRINGS myfile.txt myfile)\n" + "returned. Typical usage \n" + " file(STRINGS myfile.txt myfile)\n" "stores a list in the variable \"myfile\" in which each item is " "a line from the input file.\n" "GLOB will generate a list of all files that match the globbing " @@ -160,7 +159,7 @@ protected: bool HandleCMakePathCommand(std::vector const& args, bool nativePath); - // FILE(INSTALL ...) related functions + // file(INSTALL ...) related functions bool HandleInstallCommand(std::vector const& args); bool ParseInstallArgs(std::vector const& args, cmFileInstaller& installer, diff --git a/Source/cmFindFileCommand.cxx b/Source/cmFindFileCommand.cxx index 04d0af7..36bcbd2 100644 --- a/Source/cmFindFileCommand.cxx +++ b/Source/cmFindFileCommand.cxx @@ -21,7 +21,7 @@ cmFindFileCommand::cmFindFileCommand() { this->IncludeFileInPath = true; cmSystemTools::ReplaceString(this->GenericDocumentation, - "FIND_PATH", "FIND_FILE"); + "FIND_PATH", "find_file"); cmSystemTools::ReplaceString(this->GenericDocumentation, "directory containing the named file", "full path to named file"); diff --git a/Source/cmFindFileCommand.h b/Source/cmFindFileCommand.h index d65a51e..a4bf5da 100644 --- a/Source/cmFindFileCommand.h +++ b/Source/cmFindFileCommand.h @@ -38,7 +38,7 @@ public: { return new cmFindFileCommand; } - virtual const char* GetName() { return "FIND_FILE";} + virtual const char* GetName() { return "find_file";} /** * Succinct documentation. diff --git a/Source/cmFindLibraryCommand.cxx b/Source/cmFindLibraryCommand.cxx index 157eb3f..7971221 100644 --- a/Source/cmFindLibraryCommand.cxx +++ b/Source/cmFindLibraryCommand.cxx @@ -20,7 +20,7 @@ cmFindLibraryCommand::cmFindLibraryCommand() { cmSystemTools::ReplaceString(this->GenericDocumentation, - "FIND_XXX", "FIND_LIBRARY"); + "FIND_XXX", "find_library"); cmSystemTools::ReplaceString(this->GenericDocumentation, "CMAKE_XXX_PATH", "CMAKE_LIBRARY_PATH"); cmSystemTools::ReplaceString(this->GenericDocumentation, diff --git a/Source/cmFindLibraryCommand.h b/Source/cmFindLibraryCommand.h index 52f4a45..88bbb32 100644 --- a/Source/cmFindLibraryCommand.h +++ b/Source/cmFindLibraryCommand.h @@ -53,7 +53,7 @@ public: /** * The name of the command as specified in CMakeList.txt. */ - virtual const char* GetName() {return "FIND_LIBRARY";} + virtual const char* GetName() {return "find_library";} /** * Succinct documentation. diff --git a/Source/cmFindPackageCommand.h b/Source/cmFindPackageCommand.h index e46b4c8..ae04f6c 100644 --- a/Source/cmFindPackageCommand.h +++ b/Source/cmFindPackageCommand.h @@ -49,7 +49,7 @@ public: /** * The name of the command as specified in CMakeList.txt. */ - virtual const char* GetName() { return "FIND_PACKAGE";} + virtual const char* GetName() { return "find_package";} /** * Succinct documentation. @@ -65,7 +65,7 @@ public: virtual const char* GetFullDocumentation() { return - " FIND_PACKAGE( [major.minor] [QUIET] [NO_MODULE]\n" + " find_package( [major.minor] [QUIET] [NO_MODULE]\n" " [[REQUIRED|COMPONENTS] [components...]])\n" "Finds and loads settings from an external project. _FOUND will " "be set to indicate whether the package was found. Settings that " diff --git a/Source/cmFindPathCommand.cxx b/Source/cmFindPathCommand.cxx index a39e414..1210b3b 100644 --- a/Source/cmFindPathCommand.cxx +++ b/Source/cmFindPathCommand.cxx @@ -23,7 +23,7 @@ cmFindPathCommand::cmFindPathCommand() { this->IncludeFileInPath = false; cmSystemTools::ReplaceString(this->GenericDocumentation, - "FIND_XXX", "FIND_PATH"); + "FIND_XXX", "find_path"); cmSystemTools::ReplaceString(this->GenericDocumentation, "CMAKE_XXX_PATH", "CMAKE_INCLUDE_PATH"); cmSystemTools::ReplaceString(this->GenericDocumentation, diff --git a/Source/cmFindPathCommand.h b/Source/cmFindPathCommand.h index 5e9c83b..f4a4f01 100644 --- a/Source/cmFindPathCommand.h +++ b/Source/cmFindPathCommand.h @@ -53,7 +53,7 @@ public: /** * The name of the command as specified in CMakeList.txt. */ - virtual const char* GetName() {return "FIND_PATH";} + virtual const char* GetName() {return "find_path";} /** * Succinct documentation. diff --git a/Source/cmFindProgramCommand.cxx b/Source/cmFindProgramCommand.cxx index 1ede55b..f1b8135 100644 --- a/Source/cmFindProgramCommand.cxx +++ b/Source/cmFindProgramCommand.cxx @@ -25,7 +25,7 @@ cmFindProgramCommand::cmFindProgramCommand() { cmSystemTools::ReplaceString(this->GenericDocumentation, - "FIND_XXX", "FIND_PROGRAM"); + "FIND_XXX", "find_program"); cmSystemTools::ReplaceString(this->GenericDocumentation, "CMAKE_XXX_PATH", "CMAKE_PROGRAM_PATH"); cmSystemTools::ReplaceString(this->GenericDocumentation, diff --git a/Source/cmFindProgramCommand.h b/Source/cmFindProgramCommand.h index 2113b02..79494f3 100644 --- a/Source/cmFindProgramCommand.h +++ b/Source/cmFindProgramCommand.h @@ -53,7 +53,7 @@ public: /** * The name of the command as specified in CMakeList.txt. */ - virtual const char* GetName() { return "FIND_PROGRAM";} + virtual const char* GetName() { return "find_program";} /** * Succinct documentation. diff --git a/Source/cmForEachCommand.h b/Source/cmForEachCommand.h index 04843c4..115c522 100644 --- a/Source/cmForEachCommand.h +++ b/Source/cmForEachCommand.h @@ -73,7 +73,7 @@ public: /** * The name of the command as specified in CMakeList.txt. */ - virtual const char* GetName() { return "FOREACH";} + virtual const char* GetName() { return "foreach";} /** * Succinct documentation. @@ -89,17 +89,17 @@ public: virtual const char* GetFullDocumentation() { return - " FOREACH(loop_var arg1 arg2 ...)\n" + " foreach(loop_var arg1 arg2 ...)\n" " COMMAND1(ARGS ...)\n" " COMMAND2(ARGS ...)\n" " ...\n" - " ENDFOREACH(loop_var)\n" - " FOREACH(loop_var RANGE total)\n" - " FOREACH(loop_var RANGE start stop [step])\n" - "All commands between FOREACH and the matching ENDFOREACH are recorded " - "without being invoked. Once the ENDFOREACH is evaluated, the " + " ENDforeach(loop_var)\n" + " foreach(loop_var RANGE total)\n" + " foreach(loop_var RANGE start stop [step])\n" + "All commands between foreach and the matching ENDforeach are recorded " + "without being invoked. Once the ENDforeach is evaluated, the " "recorded list of commands is invoked once for each argument listed " - "in the original FOREACH command. Before each iteration of the loop " + "in the original foreach command. Before each iteration of the loop " "\"${loop_var}\" will be set as a variable with " "the current value in the list.\n" "Foreach can also iterate over a generated range of numbers. " diff --git a/Source/cmGetCMakePropertyCommand.h b/Source/cmGetCMakePropertyCommand.h index e4b095f..b0c6b13 100644 --- a/Source/cmGetCMakePropertyCommand.h +++ b/Source/cmGetCMakePropertyCommand.h @@ -41,7 +41,7 @@ public: /** * The name of the command as specified in CMakeList.txt. */ - virtual const char* GetName() { return "GET_CMAKE_PROPERTY";} + virtual const char* GetName() { return "get_cmake_property";} /** * Succinct documentation. @@ -57,7 +57,7 @@ public: virtual const char* GetFullDocumentation() { return - " GET_CMAKE_PROPERTY(VAR property)\n" + " get_cmake_property(VAR property)\n" "Get a property from the CMake instance. The value of the " "property is stored in the variable VAR. If the property is " "not found, CMake will report an error. Some supported properties " diff --git a/Source/cmGetDirectoryPropertyCommand.h b/Source/cmGetDirectoryPropertyCommand.h index b146488..2e3085e 100644 --- a/Source/cmGetDirectoryPropertyCommand.h +++ b/Source/cmGetDirectoryPropertyCommand.h @@ -41,7 +41,7 @@ public: /** * The name of the command as specified in CMakeList.txt. */ - virtual const char* GetName() { return "GET_DIRECTORY_PROPERTY";} + virtual const char* GetName() { return "get_directory_property";} /** * Succinct documentation. @@ -57,7 +57,7 @@ public: virtual const char* GetFullDocumentation() { return - " GET_DIRECTORY_PROPERTY(VAR [DIRECTORY dir] property)\n" + " get_directory_property(VAR [DIRECTORY dir] property)\n" "Get a property from the Directory. The value of the property is " "stored in the variable VAR. If the property is not found, " "CMake will report an error. The properties include: VARIABLES, " diff --git a/Source/cmGetFilenameComponentCommand.h b/Source/cmGetFilenameComponentCommand.h index a9c1dbb..b87ebff 100644 --- a/Source/cmGetFilenameComponentCommand.h +++ b/Source/cmGetFilenameComponentCommand.h @@ -50,7 +50,7 @@ public: /** * The name of the command as specified in CMakeList.txt. */ - virtual const char* GetName() { return "GET_FILENAME_COMPONENT";} + virtual const char* GetName() { return "get_filename_component";} /** * Succinct documentation. @@ -66,7 +66,7 @@ public: virtual const char* GetFullDocumentation() { return - " GET_FILENAME_COMPONENT(VarName FileName\n" + " get_filename_component(VarName FileName\n" " PATH|ABSOLUTE|NAME|EXT|NAME_WE\n" " [CACHE])\n" "Set VarName to be the path (PATH), file name (NAME), file " @@ -76,7 +76,7 @@ public: "trailing slashes. The longest file extension is always considered. " "If the optional CACHE argument is specified, the result variable is " "added to the cache.\n" - " GET_FILENAME_COMPONENT(VarName FileName\n" + " get_filename_component(VarName FileName\n" " PROGRAM [PROGRAM_ARGS ArgVar]\n" " [CACHE])\n" "The program in FileName will be found in the system search path or " diff --git a/Source/cmGetPropertyCommand.h b/Source/cmGetPropertyCommand.h index 5cb4350..8f2d368 100644 --- a/Source/cmGetPropertyCommand.h +++ b/Source/cmGetPropertyCommand.h @@ -41,7 +41,7 @@ public: /** * The name of the command as specified in CMakeList.txt. */ - virtual const char* GetName() { return "GET_PROPERTY";} + virtual const char* GetName() { return "get_property";} /** * Succinct documentation. @@ -57,7 +57,7 @@ public: virtual const char* GetFullDocumentation() { return - " GET_PROPERTY(VAR scope_value property)\n" + " get_property(VAR scope_value property)\n" "Get a property from cmake. The scope_value is either GLOBAL, " "DIRECTORY dir_name, TARGET tgt_name, SOURCE_FILE src_name, " "or TEST test_name. The resulting value is " diff --git a/Source/cmGetSourceFilePropertyCommand.h b/Source/cmGetSourceFilePropertyCommand.h index ed12fa7..7393548 100644 --- a/Source/cmGetSourceFilePropertyCommand.h +++ b/Source/cmGetSourceFilePropertyCommand.h @@ -36,7 +36,7 @@ public: /** * The name of the command as specified in CMakeList.txt. */ - virtual const char* GetName() { return "GET_SOURCE_FILE_PROPERTY";} + virtual const char* GetName() { return "get_source_file_property";} /** * Succinct documentation. @@ -52,10 +52,10 @@ public: virtual const char* GetFullDocumentation() { return - " GET_SOURCE_FILE_PROPERTY(VAR file property)\n" + " get_source_file_property(VAR file property)\n" "Get a property from a source file. The value of the property is " "stored in the variable VAR. If the property is not found, VAR " - "will be set to \"NOTFOUND\". Use SET_SOURCE_FILES_PROPERTIES to set " + "will be set to \"NOTFOUND\". Use set_source_files_properties to set " "property values. Source file properties usually control how the " "file is built. One property that is always there is LOCATION"; } diff --git a/Source/cmGetTargetPropertyCommand.h b/Source/cmGetTargetPropertyCommand.h index fd89115..64ab8d3 100644 --- a/Source/cmGetTargetPropertyCommand.h +++ b/Source/cmGetTargetPropertyCommand.h @@ -36,7 +36,7 @@ public: /** * The name of the command as specified in CMakeList.txt. */ - virtual const char* GetName() { return "GET_TARGET_PROPERTY";} + virtual const char* GetName() { return "get_target_property";} /** * Succinct documentation. @@ -52,10 +52,10 @@ public: virtual const char* GetFullDocumentation() { return - " GET_TARGET_PROPERTY(VAR target property)\n" + " get_target_property(VAR target property)\n" "Get a property from a target. The value of the property is " "stored in the variable VAR. If the property is not found, VAR " - "will be set to \"NOTFOUND\". Use SET_TARGET_PROPERTIES to set " + "will be set to \"NOTFOUND\". Use set_target_properties to set " "property values. Properties are usually used to control how " "a target is built.\n" "The read-only property \"_LOCATION\" provides the full " diff --git a/Source/cmGetTestPropertyCommand.h b/Source/cmGetTestPropertyCommand.h index 3009570..46588a4 100644 --- a/Source/cmGetTestPropertyCommand.h +++ b/Source/cmGetTestPropertyCommand.h @@ -36,7 +36,7 @@ public: /** * The name of the command as specified in CMakeList.txt. */ - virtual const char* GetName() { return "GET_TEST_PROPERTY";} + virtual const char* GetName() { return "get_test_property";} /** * Succinct documentation. @@ -52,7 +52,7 @@ public: virtual const char* GetFullDocumentation() { return - " GET_TEST_PROPERTY(test VAR property)\n" + " get_test_property(test VAR property)\n" "Get a property from the Test. The value of the property is " "stored in the variable VAR. If the property is not found, " "CMake will report an error. For a list of standard properties " diff --git a/Source/cmIfCommand.h b/Source/cmIfCommand.h index 7698595..9ba4434 100644 --- a/Source/cmIfCommand.h +++ b/Source/cmIfCommand.h @@ -73,7 +73,7 @@ public: /** * The name of the command as specified in CMakeList.txt. */ - virtual const char* GetName() { return "IF";} + virtual const char* GetName() { return "if";} /** * Succinct documentation. @@ -94,78 +94,78 @@ public: virtual const char* GetFullDocumentation() { return - " IF(expression)\n" - " # THEN section.\n" + " if(expression)\n" + " # then section.\n" " COMMAND1(ARGS ...)\n" " COMMAND2(ARGS ...)\n" " ...\n" - " ELSEIF(expression2)\n" - " # ELSEIF section.\n" + " elseif(expression2)\n" + " # elseif section.\n" " COMMAND1(ARGS ...)\n" " COMMAND2(ARGS ...)\n" " ...\n" - " ELSE(expression)\n" - " # ELSE section.\n" + " else(expression)\n" + " # else section.\n" " COMMAND1(ARGS ...)\n" " COMMAND2(ARGS ...)\n" " ...\n" - " ENDIF(expression)\n" + " endif(expression)\n" "Evaluates the given expression. If the result is true, the commands " "in the THEN section are invoked. Otherwise, the commands in the " - "ELSE section are invoked. The ELSEIF and ELSE sections are " - "optional. You may have multiple ELSEIF clauses. Note that " - "the same expression must be given to IF, and ENDIF. Long " + "else section are invoked. The elseif and else sections are " + "optional. You may have multiple elseif clauses. Note that " + "the same expression must be given to if, and endif. Long " "expressions can be used and the order or precedence is that the " "EXISTS, COMMAND, and DEFINED operators will be evaluated first. " "Then any EQUAL, LESS, GREATER, STRLESS, STRGREATER, STREQUAL, MATCHES " "will be evaluated. Then NOT operators and finally AND, OR operators " "will be evaluated. Possible expressions are:\n" - " IF(variable)\n" + " if(variable)\n" "True if the variable's value is not empty, 0, N, NO, OFF, FALSE, " "NOTFOUND, or -NOTFOUND.\n" - " IF(NOT variable)\n" + " if(NOT variable)\n" "True if the variable's value is empty, 0, N, NO, OFF, FALSE, " "NOTFOUND, or -NOTFOUND.\n" - " IF(variable1 AND variable2)\n" + " if(variable1 AND variable2)\n" "True if both variables would be considered true individually.\n" - " IF(variable1 OR variable2)\n" + " if(variable1 OR variable2)\n" "True if either variable would be considered true individually.\n" - " IF(COMMAND command-name)\n" + " if(COMMAND command-name)\n" "True if the given name is a command that can be invoked.\n" - " IF(EXISTS file-name)\n" - " IF(EXISTS directory-name)\n" + " if(EXISTS file-name)\n" + " if(EXISTS directory-name)\n" "True if the named file or directory exists. " "Behavior is well-defined only for full paths.\n" - " IF(file1 IS_NEWER_THAN file2)\n" + " if(file1 IS_NEWER_THAN file2)\n" "True if file1 is newer than file2 or if one of the two files " "doesn't exist. " "Behavior is well-defined only for full paths.\n" - " IF(IS_DIRECTORY directory-name)\n" + " if(IS_DIRECTORY directory-name)\n" "True if the given name is a directory. " "Behavior is well-defined only for full paths.\n" - " IF(IS_ABSOLUTE path)\n" + " if(IS_ABSOLUTE path)\n" "True if the given path is an absolute path.\n " - " IF(variable MATCHES regex)\n" - " IF(string MATCHES regex)\n" + " if(variable MATCHES regex)\n" + " if(string MATCHES regex)\n" "True if the given string or variable's value matches the given " "regular expression.\n" - " IF(variable LESS number)\n" - " IF(string LESS number)\n" - " IF(variable GREATER number)\n" - " IF(string GREATER number)\n" - " IF(variable EQUAL number)\n" - " IF(string EQUAL number)\n" + " if(variable LESS number)\n" + " if(string LESS number)\n" + " if(variable GREATER number)\n" + " if(string GREATER number)\n" + " if(variable EQUAL number)\n" + " if(string EQUAL number)\n" "True if the given string or variable's value is a valid number and " "the inequality or equality is true.\n" - " IF(variable STRLESS string)\n" - " IF(string STRLESS string)\n" - " IF(variable STRGREATER string)\n" - " IF(string STRGREATER string)\n" - " IF(variable STREQUAL string)\n" - " IF(string STREQUAL string)\n" + " if(variable STRLESS string)\n" + " if(string STRLESS string)\n" + " if(variable STRGREATER string)\n" + " if(string STRGREATER string)\n" + " if(variable STREQUAL string)\n" + " if(string STREQUAL string)\n" "True if the given string or variable's value is lexicographically " "less (or greater, or equal) than the string on the right.\n" - " IF(DEFINED variable)\n" + " if(DEFINED variable)\n" "True if the given variable is defined. It does not matter if the " "variable is true or false just if it has been set."; } diff --git a/Source/cmIncludeCommand.h b/Source/cmIncludeCommand.h index 428df0c..b6a21d9 100644 --- a/Source/cmIncludeCommand.h +++ b/Source/cmIncludeCommand.h @@ -52,7 +52,7 @@ public: /** * The name of the command as specified in CMakeList.txt. */ - virtual const char* GetName() {return "INCLUDE";} + virtual const char* GetName() {return "include";} /** * Succinct documentation. @@ -68,11 +68,11 @@ public: virtual const char* GetFullDocumentation() { return - " INCLUDE(file1 [OPTIONAL] [RESULT_VARIABLE ])\n" - " INCLUDE(module [OPTIONAL] [RESULT_VARIABLE ])\n" + " include(file1 [OPTIONAL] [RESULT_VARIABLE ])\n" + " include(module [OPTIONAL] [RESULT_VARIABLE ])\n" "Reads CMake listfile code from the given file. Commands in the file " "are processed immediately as if they were written in place of the " - "INCLUDE command. If OPTIONAL is present, then no error " + "include command. If OPTIONAL is present, then no error " "is raised if the file does not exist. If RESULT_VARIABLE is given " "the variable will be set to the full filename which " "has been included or NOTFOUND if it failed.\n" diff --git a/Source/cmIncludeDirectoryCommand.h b/Source/cmIncludeDirectoryCommand.h index 4c0be37..7eaf870 100644 --- a/Source/cmIncludeDirectoryCommand.h +++ b/Source/cmIncludeDirectoryCommand.h @@ -45,7 +45,7 @@ public: /** * The name of the command as specified in CMakeList.txt. */ - virtual const char* GetName() { return "INCLUDE_DIRECTORIES";} + virtual const char* GetName() { return "include_directories";} /** * Succinct documentation. @@ -61,11 +61,11 @@ public: virtual const char* GetFullDocumentation() { return - " INCLUDE_DIRECTORIES([AFTER|BEFORE] [SYSTEM] dir1 dir2 ...)\n" + " include_directories([AFTER|BEFORE] [SYSTEM] dir1 dir2 ...)\n" "Add the given directories to those searched by the compiler for " "include files. By default the directories are appended onto " "the current list of directories. This default behavior can be " - "changed by setting CMAKE_INCLUDE_DIRECTORIES_BEFORE to ON. " + "changed by setting CMAKE_include_directories_BEFORE to ON. " "By using BEFORE or AFTER you can select between appending and " "prepending, independent from the default. " "If the SYSTEM option is given the compiler will be told that the " diff --git a/Source/cmIncludeExternalMSProjectCommand.h b/Source/cmIncludeExternalMSProjectCommand.h index c597172..780ab04 100644 --- a/Source/cmIncludeExternalMSProjectCommand.h +++ b/Source/cmIncludeExternalMSProjectCommand.h @@ -46,7 +46,7 @@ public: /** * The name of the command as specified in CMakeList.txt. */ - virtual const char* GetName() {return "INCLUDE_EXTERNAL_MSPROJECT";} + virtual const char* GetName() {return "include_external_msproject";} /** * Succinct documentation. @@ -62,7 +62,7 @@ public: virtual const char* GetFullDocumentation() { return - " INCLUDE_EXTERNAL_MSPROJECT(projectname location\n" + " include_external_msproject(projectname location\n" " dep1 dep2 ...)\n" "Includes an external Microsoft project in the generated workspace " "file. Currently does nothing on UNIX."; diff --git a/Source/cmIncludeRegularExpressionCommand.h b/Source/cmIncludeRegularExpressionCommand.h index 0c160d6..699574b 100644 --- a/Source/cmIncludeRegularExpressionCommand.h +++ b/Source/cmIncludeRegularExpressionCommand.h @@ -45,7 +45,7 @@ public: /** * The name of the command as specified in CMakeList.txt. */ - virtual const char* GetName() {return "INCLUDE_REGULAR_EXPRESSION";} + virtual const char* GetName() {return "include_regular_expression";} /** * Succinct documentation. @@ -61,7 +61,7 @@ public: virtual const char* GetFullDocumentation() { return - " INCLUDE_REGULAR_EXPRESSION(regex_match [regex_complain])\n" + " include_regular_expression(regex_match [regex_complain])\n" "Set the regular expressions used in dependency checking. Only files " "matching regex_match will be traced as dependencies. Only files " "matching regex_complain will generate warnings if they cannot be " diff --git a/Source/cmInstallCommand.h b/Source/cmInstallCommand.h index 7afa866..d7b3f64 100644 --- a/Source/cmInstallCommand.h +++ b/Source/cmInstallCommand.h @@ -45,7 +45,7 @@ public: /** * The name of the command as specified in CMakeList.txt. */ - virtual const char* GetName() { return "INSTALL";} + virtual const char* GetName() { return "install";} /** * Succinct documentation. @@ -97,7 +97,7 @@ public: "file to be installed does not exist. " "\n" "The TARGETS signature:\n" - " INSTALL(TARGETS targets...\n" + " install(TARGETS targets...\n" " [[ARCHIVE|LIBRARY|RUNTIME]\n" " [DESTINATION ]\n" " [PERMISSIONS permissions...]\n" @@ -130,11 +130,11 @@ public: "to the TARGETS form of this command. A target may be installed more " "than once to different locations. Consider hypothetical " "targets \"myExe\", \"mySharedLib\", and \"myStaticLib\". The code\n" - " INSTALL(TARGETS myExe mySharedLib myStaticLib\n" + " install(TARGETS myExe mySharedLib myStaticLib\n" " RUNTIME DESTINATION bin\n" " LIBRARY DESTINATION lib\n" " ARCHIVE DESTINATION lib/static)\n" - " INSTALL(TARGETS mySharedLib DESTINATION /some/full/path)\n" + " install(TARGETS mySharedLib DESTINATION /some/full/path)\n" "will install myExe to /bin and myStaticLib to " "/lib/static. " "On non-DLL platforms mySharedLib will be installed to /lib " @@ -148,7 +148,7 @@ public: "undefined behavior." "\n" "The FILES signature:\n" - " INSTALL(FILES files... DESTINATION \n" + " install(FILES files... DESTINATION \n" " [PERMISSIONS permissions...]\n" " [CONFIGURATIONS [Debug|Release|...]]\n" " [COMPONENT ]\n" @@ -160,7 +160,7 @@ public: "GROUP_READ, and WORLD_READ if no PERMISSIONS argument is given." "\n" "The PROGRAMS signature:\n" - " INSTALL(PROGRAMS files... DESTINATION \n" + " install(PROGRAMS files... DESTINATION \n" " [PERMISSIONS permissions...]\n" " [CONFIGURATIONS [Debug|Release|...]]\n" " [COMPONENT ]\n" @@ -173,7 +173,7 @@ public: "built within the project." "\n" "The DIRECTORY signature:\n" - " INSTALL(DIRECTORY dirs... DESTINATION \n" + " install(DIRECTORY dirs... DESTINATION \n" " [FILE_PERMISSIONS permissions...]\n" " [DIRECTORY_PERMISSIONS permissions...]\n" " [USE_SOURCE_PERMISSIONS]\n" @@ -214,7 +214,7 @@ public: "The PERMISSIONS option overrides the permissions setting for the " "matched file or directory. " "For example the code\n" - " INSTALL(DIRECTORY icons scripts/ DESTINATION share/myproj\n" + " install(DIRECTORY icons scripts/ DESTINATION share/myproj\n" " PATTERN \"CVS\" EXCLUDE\n" " PATTERN \"scripts/*\"\n" " PERMISSIONS OWNER_EXECUTE OWNER_WRITE OWNER_READ\n" @@ -225,14 +225,14 @@ public: "any CVS directories will be excluded." "\n" "The SCRIPT and CODE signature:\n" - " INSTALL([[SCRIPT ] [CODE ]] [...])\n" + " install([[SCRIPT ] [CODE ]] [...])\n" "The SCRIPT form will invoke the given CMake script files during " "installation. If the script file name is a relative path " "it will be interpreted with respect to the current source directory. " "The CODE form will invoke the given CMake code during installation. " "Code is specified as a single argument inside a double-quoted string. " "For example, the code\n" - " INSTALL(CODE \"MESSAGE(\\\"Sample install message.\\\")\")\n" + " install(CODE \"MESSAGE(\\\"Sample install message.\\\")\")\n" "will print a message during installation.\n" "NOTE: This command supercedes the INSTALL_TARGETS command and the " "target properties PRE_INSTALL_SCRIPT and POST_INSTALL_SCRIPT. " diff --git a/Source/cmInstallFilesCommand.h b/Source/cmInstallFilesCommand.h index 357f343..7885d18 100644 --- a/Source/cmInstallFilesCommand.h +++ b/Source/cmInstallFilesCommand.h @@ -45,14 +45,14 @@ public: /** * The name of the command as specified in CMakeList.txt. */ - virtual const char* GetName() { return "INSTALL_FILES";} + virtual const char* GetName() { return "install_files";} /** * Succinct documentation. */ virtual const char* GetTerseDocumentation() { - return "Deprecated. Use the INSTALL(FILES ) command instead."; + return "Deprecated. Use the install(FILES ) command instead."; } /** @@ -69,12 +69,12 @@ public: virtual const char* GetFullDocumentation() { return - "This command has been superceded by the INSTALL command. It " + "This command has been superceded by the install command. It " "is provided for compatibility with older CMake code. " "The FILES form is directly replaced by the FILES form of the " - "INSTALL command. The regexp form can be expressed " - "more clearly using the GLOB form of the FILE command.\n" - " INSTALL_FILES( extension file file ...)\n" + "install command. The regexp form can be expressed " + "more clearly using the GLOB form of the file command.\n" + " install_files( extension file file ...)\n" "Create rules to install the listed files with the given extension " "into the given directory. " "Only files existing in the current source tree or its corresponding " @@ -83,10 +83,10 @@ public: "removed first. This is useful for providing lists of source files " "such as foo.cxx when you want the corresponding foo.h to be " "installed. A typical extension is '.h'.\n" - " INSTALL_FILES( regexp)\n" + " install_files( regexp)\n" "Any files in the current source directory that match the regular " "expression will be installed.\n" - " INSTALL_FILES( FILES file file ...)\n" + " install_files( FILES file file ...)\n" "Any files listed after the FILES keyword will be " "installed explicitly from the names given. Full paths are allowed in " "this form.\n" diff --git a/Source/cmInstallProgramsCommand.h b/Source/cmInstallProgramsCommand.h index 6b085f5..81800ef 100644 --- a/Source/cmInstallProgramsCommand.h +++ b/Source/cmInstallProgramsCommand.h @@ -45,14 +45,14 @@ public: /** * The name of the command as specified in CMakeList.txt. */ - virtual const char* GetName() { return "INSTALL_PROGRAMS";} + virtual const char* GetName() { return "install_programs";} /** * Succinct documentation. */ virtual const char* GetTerseDocumentation() { - return "Deprecated. Use the INSTALL(PROGRAMS ) command instead."; + return "Deprecated. Use the install(PROGRAMS ) command instead."; } /** @@ -69,17 +69,17 @@ public: virtual const char* GetFullDocumentation() { return - "This command has been superceded by the INSTALL command. It " + "This command has been superceded by the install command. It " "is provided for compatibility with older CMake code. " "The FILES form is directly replaced by the PROGRAMS form of the " "INSTALL command. The regexp form can be expressed more clearly " "using the GLOB form of the FILE command.\n" - " INSTALL_PROGRAMS( file1 file2 [file3 ...])\n" - " INSTALL_PROGRAMS( FILES file1 [file2 ...])\n" + " install_programs( file1 file2 [file3 ...])\n" + " install_programs( FILES file1 [file2 ...])\n" "Create rules to install the listed programs into the given directory. " "Use the FILES argument to guarantee that the file list version of " "the command will be used even when there is only one argument.\n" - " INSTALL_PROGRAMS( regexp)\n" + " install_programs( regexp)\n" "In the second form any program in the current source directory that " "matches the regular expression will be installed.\n" "This command is intended to install programs that are not built " diff --git a/Source/cmInstallTargetsCommand.h b/Source/cmInstallTargetsCommand.h index 59d68f3..e98b831 100644 --- a/Source/cmInstallTargetsCommand.h +++ b/Source/cmInstallTargetsCommand.h @@ -46,14 +46,14 @@ public: /** * The name of the command as specified in CMakeList.txt. */ - virtual const char* GetName() { return "INSTALL_TARGETS";} + virtual const char* GetName() { return "install_targets";} /** * Succinct documentation. */ virtual const char* GetTerseDocumentation() { - return "Deprecated. Use the INSTALL(TARGETS ) command instead."; + return "Deprecated. Use the install(TARGETS ) command instead."; } /** @@ -62,9 +62,9 @@ public: virtual const char* GetFullDocumentation() { return - "This command has been superceded by the INSTALL command. It " + "This command has been superceded by the install command. It " "is provided for compatibility with older CMake code.\n" - " INSTALL_TARGETS( [RUNTIME_DIRECTORY dir] target target)\n" + " install_targets( [RUNTIME_DIRECTORY dir] target target)\n" "Create rules to install the listed targets into the given directory. " "The directory is relative to the installation prefix, which " "is stored in the variable CMAKE_INSTALL_PREFIX. If RUNTIME_DIRECTORY " diff --git a/Source/cmLinkDirectoriesCommand.h b/Source/cmLinkDirectoriesCommand.h index cb88cd9..cef13be 100644 --- a/Source/cmLinkDirectoriesCommand.h +++ b/Source/cmLinkDirectoriesCommand.h @@ -47,7 +47,7 @@ public: /** * The name of the command as specified in CMakeList.txt. */ - virtual const char* GetName() { return "LINK_DIRECTORIES";} + virtual const char* GetName() { return "link_directories";} /** * Succinct documentation. @@ -63,7 +63,7 @@ public: virtual const char* GetFullDocumentation() { return - " LINK_DIRECTORIES(directory1 directory2 ...)\n" + " link_directories(directory1 directory2 ...)\n" "Specify the paths in which the linker should search for libraries."; } diff --git a/Source/cmLinkLibrariesCommand.h b/Source/cmLinkLibrariesCommand.h index 9e860e9..a7e9962 100644 --- a/Source/cmLinkLibrariesCommand.h +++ b/Source/cmLinkLibrariesCommand.h @@ -46,14 +46,14 @@ public: /** * The name of the command as specified in CMakeList.txt. */ - virtual const char* GetName() { return "LINK_LIBRARIES";} + virtual const char* GetName() { return "link_libraries";} /** * Succinct documentation. */ virtual const char* GetTerseDocumentation() { - return "Deprecated. Use the TARGET_LINK_LIBRARIES() command instead."; + return "Deprecated. Use the target_link_libraries() command instead."; } /** @@ -63,10 +63,10 @@ public: { return "Link libraries to all targets added later.\n" - " LINK_LIBRARIES(library1 library2 ...)\n" + " link_libraries(library1 library2 ...)\n" "Specify a list of libraries to be linked into " - "any following targets (typically added with the ADD_EXECUTABLE " - "or ADD_LIBRARY calls). This command is passed " + "any following targets (typically added with the add_executable " + "or add_library calls). This command is passed " "down to all subdirectories. " "The debug and optimized strings may be used to indicate that " "the next library listed is to be used only for that specific " diff --git a/Source/cmListCommand.h b/Source/cmListCommand.h index a99604b..735a41b 100644 --- a/Source/cmListCommand.h +++ b/Source/cmListCommand.h @@ -48,7 +48,7 @@ public: /** * The name of the command as specified in CMakeList.txt. */ - virtual const char* GetName() { return "LIST";} + virtual const char* GetName() { return "list";} /** * Succinct documentation. @@ -64,16 +64,16 @@ public: virtual const char* GetFullDocumentation() { return - " LIST(LENGTH )\n" - " LIST(GET [ ...] " + " list(LENGTH )\n" + " list(GET [ ...] " ")\n" - " LIST(APPEND [ ...])\n" - " LIST(FIND )\n" - " LIST(INSERT [ ...])\n" - " LIST(REMOVE_ITEM [ ...])\n" - " LIST(REMOVE_AT [ ...])\n" - " LIST(REVERSE )\n" - " LIST(SORT )\n" + " list(APPEND [ ...])\n" + " list(FIND )\n" + " list(INSERT [ ...])\n" + " list(REMOVE_ITEM [ ...])\n" + " list(REMOVE_AT [ ...])\n" + " list(REVERSE )\n" + " list(SORT )\n" "LENGTH will return a given list's length.\n" "GET will return list of elements specified by indices from the list.\n" "APPEND will append elements to the list.\n" diff --git a/Source/cmLoadCacheCommand.h b/Source/cmLoadCacheCommand.h index f752c95..e19c35b 100644 --- a/Source/cmLoadCacheCommand.h +++ b/Source/cmLoadCacheCommand.h @@ -44,7 +44,7 @@ public: /** * The name of the command as specified in CMakeList.txt. */ - virtual const char* GetName() { return "LOAD_CACHE";} + virtual const char* GetName() { return "load_cache";} /** * Succinct documentation. @@ -60,13 +60,13 @@ public: virtual const char* GetFullDocumentation() { return - " LOAD_CACHE(pathToCacheFile READ_WITH_PREFIX\n" + " load_cache(pathToCacheFile READ_WITH_PREFIX\n" " prefix entry1...)\n" "Read the cache and store the requested entries in variables with " "their name prefixed with the given prefix. " "This only reads the values, and does not create entries in the local " "project's cache.\n" - " LOAD_CACHE(pathToCacheFile [EXCLUDE entry1...]\n" + " load_cache(pathToCacheFile [EXCLUDE entry1...]\n" " [INCLUDE_INTERNALS entry1...])\n" "Load in the values from another cache and store them in the local " "project's cache as internal entries. This is useful for a project " diff --git a/Source/cmLoadCommandCommand.h b/Source/cmLoadCommandCommand.h index 76aca9e..e63b9f1 100644 --- a/Source/cmLoadCommandCommand.h +++ b/Source/cmLoadCommandCommand.h @@ -44,7 +44,7 @@ public: /** * The name of the command as specified in CMakeList.txt. */ - virtual const char* GetName() {return "LOAD_COMMAND";} + virtual const char* GetName() {return "load_command";} /** * Succinct documentation. @@ -60,7 +60,7 @@ public: virtual const char* GetFullDocumentation() { return - " LOAD_COMMAND(COMMAND_NAME [loc2 ...])\n" + " load_command(COMMAND_NAME [loc2 ...])\n" "The given locations are searched for a library whose name is " "cmCOMMAND_NAME. If found, it is loaded as a module and the command " "is added to the set of available CMake commands. Usually, " diff --git a/Source/cmMacroCommand.h b/Source/cmMacroCommand.h index d93bdd8..f0df9c4 100644 --- a/Source/cmMacroCommand.h +++ b/Source/cmMacroCommand.h @@ -69,7 +69,7 @@ public: /** * The name of the command as specified in CMakeList.txt. */ - virtual const char* GetName() { return "MACRO";} + virtual const char* GetName() { return "macro";} /** * Succinct documentation. @@ -85,14 +85,14 @@ public: virtual const char* GetFullDocumentation() { return - " MACRO( [arg1 [arg2 [arg3 ...]]])\n" + " macro( [arg1 [arg2 [arg3 ...]]])\n" " COMMAND1(ARGS ...)\n" " COMMAND2(ARGS ...)\n" " ...\n" - " ENDMACRO()\n" + " endmacro()\n" "Define a macro named that takes arguments named " - "arg1 arg2 arg3 (...). Commands listed after MACRO, " - "but before the matching ENDMACRO, are not invoked until the macro " + "arg1 arg2 arg3 (...). Commands listed after macro, " + "but before the matching endmacro, are not invoked until the macro " "is invoked. When it is invoked, the commands recorded in the " "macro are first modified by replacing formal parameters (${arg1}) " "with the arguments passed, and then invoked as normal commands. In " diff --git a/Source/cmMakeDirectoryCommand.h b/Source/cmMakeDirectoryCommand.h index f43c943..db6b113 100644 --- a/Source/cmMakeDirectoryCommand.h +++ b/Source/cmMakeDirectoryCommand.h @@ -48,7 +48,7 @@ public: /** * The name of the command as specified in CMakeList.txt. */ - virtual const char* GetName() { return "MAKE_DIRECTORY";} + virtual const char* GetName() { return "make_directory";} /** * This determines if the command is invoked when in script mode. @@ -60,7 +60,7 @@ public: */ virtual const char* GetTerseDocumentation() { - return "Deprecated. Use the FILE(MAKE_DIRECTORY ) command instead."; + return "Deprecated. Use the file(MAKE_DIRECTORY ) command instead."; } /** @@ -69,7 +69,7 @@ public: virtual const char* GetFullDocumentation() { return - " MAKE_DIRECTORY(directory)\n" + " make_directory(directory)\n" "Creates the specified directory. Full paths should be given. Any " "parent directories that do not exist will also be created. Use with " "care."; diff --git a/Source/cmMarkAsAdvancedCommand.h b/Source/cmMarkAsAdvancedCommand.h index de267c9..7388285 100644 --- a/Source/cmMarkAsAdvancedCommand.h +++ b/Source/cmMarkAsAdvancedCommand.h @@ -44,7 +44,7 @@ public: /** * The name of the command as specified in CMakeList.txt. */ - virtual const char* GetName() {return "MARK_AS_ADVANCED";} + virtual const char* GetName() {return "mark_as_advanced";} /** * Succinct documentation. @@ -60,7 +60,7 @@ public: virtual const char* GetFullDocumentation() { return - " MARK_AS_ADVANCED([CLEAR|FORCE] VAR VAR2 VAR...)\n" + " mark_as_advanced([CLEAR|FORCE] VAR VAR2 VAR...)\n" "Mark the named cached variables as advanced. An advanced variable " "will not be displayed in any of the cmake GUIs unless the show " "advanced option is on. " @@ -75,7 +75,7 @@ public: /** * This determines if the command is invoked when in script mode. - * MARK_AS_ADVANCED() will have no effect in script mode, but this will + * mark_as_advanced() will have no effect in script mode, but this will * make many of the modules usable in cmake/ctest scripts, (among them * FindUnixMake.cmake used by the CTEST_BUILD command. */ diff --git a/Source/cmMathCommand.h b/Source/cmMathCommand.h index 81fb57c..9f0d23c 100644 --- a/Source/cmMathCommand.h +++ b/Source/cmMathCommand.h @@ -48,7 +48,7 @@ public: /** * The name of the command as specified in CMakeList.txt. */ - virtual const char* GetName() { return "MATH";} + virtual const char* GetName() { return "math";} /** * Succinct documentation. @@ -64,7 +64,7 @@ public: virtual const char* GetFullDocumentation() { return - " MATH(EXPR )\n" + " math(EXPR )\n" "EXPR evaluates mathematical expression and return result in the " "output variable. Example mathematical expression is " "'5 * ( 10 + 13 )'. Supported operators are " diff --git a/Source/cmMessageCommand.h b/Source/cmMessageCommand.h index 6206124..02c5c23 100644 --- a/Source/cmMessageCommand.h +++ b/Source/cmMessageCommand.h @@ -43,7 +43,7 @@ public: /** * The name of the command as specified in CMakeList.txt. */ - virtual const char* GetName() { return "MESSAGE";} + virtual const char* GetName() { return "message";} /** * This determines if the command is invoked when in script mode. @@ -64,7 +64,7 @@ public: virtual const char* GetFullDocumentation() { return - " MESSAGE([SEND_ERROR | STATUS | FATAL_ERROR]\n" + " message([SEND_ERROR | STATUS | FATAL_ERROR]\n" " \"message to display\" ...)\n" "By default the message is displayed in a pop up window (CMakeSetup), " "or in the stdout of cmake, or the error section of ccmake. " diff --git a/Source/cmOptionCommand.h b/Source/cmOptionCommand.h index 9c6d99d..f1d01b6 100644 --- a/Source/cmOptionCommand.h +++ b/Source/cmOptionCommand.h @@ -44,7 +44,7 @@ public: /** * The name of the command as specified in CMakeList.txt. */ - virtual const char* GetName() {return "OPTION";} + virtual const char* GetName() {return "option";} /** * Succinct documentation. @@ -60,7 +60,7 @@ public: virtual const char* GetFullDocumentation() { return - " OPTION(OPTION_VAR \"help string describing option\"\n" + " option(OPTION_VAR \"help string describing option\"\n" " [initial value])\n" "Provide an option for the user to select as ON or OFF. If no " "initial value is provided, OFF is used."; diff --git a/Source/cmOutputRequiredFilesCommand.h b/Source/cmOutputRequiredFilesCommand.h index 338b271..da18446 100644 --- a/Source/cmOutputRequiredFilesCommand.h +++ b/Source/cmOutputRequiredFilesCommand.h @@ -46,7 +46,7 @@ public: /** * The name of the command as specified in CMakeList.txt. */ - virtual const char* GetName() { return "OUTPUT_REQUIRED_FILES";} + virtual const char* GetName() { return "output_required_files";} /** * Succinct documentation. @@ -63,7 +63,7 @@ public: virtual const char* GetFullDocumentation() { return - " OUTPUT_REQUIRED_FILES(srcfile outputfile)\n" + " output_required_files(srcfile outputfile)\n" "Outputs a list of all the source files that are required by the " "specified srcfile. This list is written into outputfile. This is " "similar to writing out the dependencies for srcfile except that it " diff --git a/Source/cmProjectCommand.h b/Source/cmProjectCommand.h index bd5aa20..11e297e 100644 --- a/Source/cmProjectCommand.h +++ b/Source/cmProjectCommand.h @@ -47,7 +47,7 @@ public: /** * The name of the command as specified in CMakeList.txt. */ - virtual const char* GetName() {return "PROJECT";} + virtual const char* GetName() {return "project";} /** * Succinct documentation. @@ -63,7 +63,7 @@ public: virtual const char* GetFullDocumentation() { return - " PROJECT(projectname [CXX] [C] [Java])\n" + " project(projectname [CXX] [C] [Java])\n" "Sets the name of the project. " "This creates the variables projectname_BINARY_DIR and " "projectname_SOURCE_DIR. " diff --git a/Source/cmQTWrapCPPCommand.h b/Source/cmQTWrapCPPCommand.h index 79d729b..785b07c 100644 --- a/Source/cmQTWrapCPPCommand.h +++ b/Source/cmQTWrapCPPCommand.h @@ -49,7 +49,7 @@ public: /** * The name of the command as specified in CMakeList.txt. */ - virtual const char* GetName() { return "QT_WRAP_CPP";} + virtual const char* GetName() { return "qt_wrap_cpp";} /** * Succinct documentation. @@ -65,7 +65,7 @@ public: virtual const char* GetFullDocumentation() { return - " QT_WRAP_CPP(resultingLibraryName DestName\n" + " qt_wrap_cpp(resultingLibraryName DestName\n" " SourceLists ...)\n" "Produce moc files for all the .h files listed in the SourceLists. " "The moc files will be added to the library using the DestName " diff --git a/Source/cmQTWrapUICommand.h b/Source/cmQTWrapUICommand.h index e9a9354..1682b0c 100644 --- a/Source/cmQTWrapUICommand.h +++ b/Source/cmQTWrapUICommand.h @@ -47,7 +47,7 @@ public: /** * The name of the command as specified in CMakeList.txt. */ - virtual const char* GetName() { return "QT_WRAP_UI";} + virtual const char* GetName() { return "qt_wrap_ui";} /** * Succinct documentation. @@ -63,7 +63,7 @@ public: virtual const char* GetFullDocumentation() { return - " QT_WRAP_UI(resultingLibraryName HeadersDestName\n" + " qt_wrap_ui(resultingLibraryName HeadersDestName\n" " SourcesDestName SourceLists ...)\n" "Produce .h and .cxx files for all the .ui files listed " "in the SourceLists. " diff --git a/Source/cmRemoveCommand.h b/Source/cmRemoveCommand.h index 04bf314..10766a9 100644 --- a/Source/cmRemoveCommand.h +++ b/Source/cmRemoveCommand.h @@ -49,14 +49,14 @@ public: /** * The name of the command as specified in CMakeList.txt. */ - virtual const char* GetName() {return "REMOVE";} + virtual const char* GetName() {return "remove";} /** * Succinct documentation. */ virtual const char* GetTerseDocumentation() { - return "Deprecated. Use the LIST(REMOVE_ITEM ) command instead."; + return "Deprecated. Use the list(REMOVE_ITEM ) command instead."; } /** @@ -65,7 +65,7 @@ public: virtual const char* GetFullDocumentation() { return - " REMOVE(VAR VALUE VALUE ...)\n" + " remove(VAR VALUE VALUE ...)\n" "Removes VALUE from the variable VAR. " "This is typically used to remove entries from a vector " "(e.g. semicolon separated list). VALUE is expanded."; diff --git a/Source/cmRemoveDefinitionsCommand.h b/Source/cmRemoveDefinitionsCommand.h index 1bd7c01..2444ab0 100644 --- a/Source/cmRemoveDefinitionsCommand.h +++ b/Source/cmRemoveDefinitionsCommand.h @@ -46,7 +46,7 @@ public: /** * The name of the command as specified in CMakeList.txt. */ - virtual const char* GetName() {return "REMOVE_DEFINITIONS";} + virtual const char* GetName() {return "remove_definitions";} /** * Succinct documentation. @@ -63,7 +63,7 @@ public: virtual const char* GetFullDocumentation() { return - " REMOVE_DEFINITIONS(-DFOO -DBAR ...)\n" + " remove_definitions(-DFOO -DBAR ...)\n" "Removes flags from command line of C and C++ compilers. " "This command can be used to remove any flag from a compile line, " "but the -D flag is accepted by most C/C++ compilers. " diff --git a/Source/cmSeparateArgumentsCommand.h b/Source/cmSeparateArgumentsCommand.h index a86b704..0bc87ef 100644 --- a/Source/cmSeparateArgumentsCommand.h +++ b/Source/cmSeparateArgumentsCommand.h @@ -49,7 +49,7 @@ public: /** * The name of the command as specified in CMakeList.txt. */ - virtual const char* GetName() {return "SEPARATE_ARGUMENTS";} + virtual const char* GetName() {return "separate_arguments";} /** * Succinct documentation. @@ -66,7 +66,7 @@ public: virtual const char* GetFullDocumentation() { return - " SEPARATE_ARGUMENTS(VARIABLE)\n" + " separate_arguments(VARIABLE)\n" "Convert the value of VARIABLE to a semi-colon separated list. " "All spaces are replaced with ';'. This helps with generating " "command lines."; diff --git a/Source/cmSetCommand.h b/Source/cmSetCommand.h index c73968f..73d7f0f 100644 --- a/Source/cmSetCommand.h +++ b/Source/cmSetCommand.h @@ -49,7 +49,7 @@ public: /** * The name of the command as specified in CMakeList.txt. */ - virtual const char* GetName() {return "SET";} + virtual const char* GetName() {return "set";} /** * Succinct documentation. @@ -65,7 +65,7 @@ public: virtual const char* GetFullDocumentation() { return - " SET(VAR [VALUE] [CACHE TYPE DOCSTRING [FORCE]])\n" + " set(VAR [VALUE] [CACHE TYPE DOCSTRING [FORCE]])\n" "Within CMake sets VAR to the value VALUE. VALUE is expanded before " "VAR is set to it. If CACHE is present, then the VAR is put in the " "cache. TYPE and DOCSTRING are required. TYPE is used by the CMake GUI " @@ -81,10 +81,10 @@ public: "variable, then this always writes into the current makefile. The " "FORCE option will overwrite the cache value removing any changes by " "the user.\n" - " SET(VAR VALUE1 ... VALUEN).\n" + " set(VAR VALUE1 ... VALUEN).\n" "In this case VAR is set to a semicolon separated list of values.\n" "VAR can be an environment variable such as:\n" - " SET( ENV{PATH} /home/martink )\n" + " set( ENV{PATH} /home/martink )\n" "in which case the environment variable will be set."; } diff --git a/Source/cmSetDirectoryPropertiesCommand.h b/Source/cmSetDirectoryPropertiesCommand.h index 143ceb3..039f21a 100644 --- a/Source/cmSetDirectoryPropertiesCommand.h +++ b/Source/cmSetDirectoryPropertiesCommand.h @@ -41,7 +41,7 @@ public: /** * The name of the command as specified in CMakeList.txt. */ - virtual const char* GetName() { return "SET_DIRECTORY_PROPERTIES";} + virtual const char* GetName() { return "set_directory_properties";} /** * Succinct documentation. @@ -65,7 +65,7 @@ public: virtual const char* GetFullDocumentation() { return - " SET_DIRECTORY_PROPERTIES(PROPERTIES prop1 value1 prop2 value2)\n" + " set_directory_properties(PROPERTIES prop1 value1 prop2 value2)\n" "Set a property for the current directory and subdirectories. If the " "property is not found, CMake will report an error. The properties " "include: INCLUDE_DIRECTORIES, LINK_DIRECTORIES, " diff --git a/Source/cmSetPropertiesCommand.h b/Source/cmSetPropertiesCommand.h index 79c9394..ce85cbd 100644 --- a/Source/cmSetPropertiesCommand.h +++ b/Source/cmSetPropertiesCommand.h @@ -36,7 +36,7 @@ public: /** * The name of the command as specified in CMakeList.txt. */ - virtual const char* GetName() { return "SET_PROPERTIES";} + virtual const char* GetName() { return "set_properties";} /** * Succinct documentation. @@ -52,7 +52,7 @@ public: virtual const char* GetFullDocumentation() { return - " SET_PROPERTIES(scope_value\n" + " set_properties(scope_value\n" " PROPERTIES prop1 value1\n" " prop2 value2 ...)\n" "Set properties on something. The scope_value is either GLOBAL, " diff --git a/Source/cmSetSourceFilesPropertiesCommand.h b/Source/cmSetSourceFilesPropertiesCommand.h index d246d24..fad76ee 100644 --- a/Source/cmSetSourceFilesPropertiesCommand.h +++ b/Source/cmSetSourceFilesPropertiesCommand.h @@ -36,7 +36,7 @@ public: /** * The name of the command as specified in CMakeList.txt. */ - virtual const char* GetName() { return "SET_SOURCE_FILES_PROPERTIES";} + virtual const char* GetName() { return "set_source_files_properties";} /** * Succinct documentation. @@ -52,7 +52,7 @@ public: virtual const char* GetFullDocumentation() { return - " SET_SOURCE_FILES_PROPERTIES(file1 file2 ...\n" + " set_source_files_properties(file1 file2 ...\n" " PROPERTIES prop1 value1\n" " prop2 value2 ...)\n" "Set properties on a file. The syntax for the command is to list all " diff --git a/Source/cmSetTargetPropertiesCommand.h b/Source/cmSetTargetPropertiesCommand.h index c25895c..bc48a70 100644 --- a/Source/cmSetTargetPropertiesCommand.h +++ b/Source/cmSetTargetPropertiesCommand.h @@ -36,7 +36,7 @@ public: /** * The name of the command as specified in CMakeList.txt. */ - virtual const char* GetName() { return "SET_TARGET_PROPERTIES";} + virtual const char* GetName() { return "set_target_properties";} /** * Succinct documentation. @@ -59,7 +59,7 @@ public: virtual const char* GetFullDocumentation() { return - " SET_TARGET_PROPERTIES(target1 target2 ...\n" + " set_target_properties(target1 target2 ...\n" " PROPERTIES prop1 value1\n" " prop2 value2 ...)\n" "Set properties on a target. The syntax for the command is to " diff --git a/Source/cmSetTestsPropertiesCommand.h b/Source/cmSetTestsPropertiesCommand.h index 16b5188..8717d90 100644 --- a/Source/cmSetTestsPropertiesCommand.h +++ b/Source/cmSetTestsPropertiesCommand.h @@ -36,7 +36,7 @@ public: /** * The name of the command as specified in CMakeList.txt. */ - virtual const char* GetName() { return "SET_TESTS_PROPERTIES";} + virtual const char* GetName() { return "set_tests_properties";} /** * Succinct documentation. @@ -52,7 +52,7 @@ public: virtual const char* GetFullDocumentation() { return - " SET_TESTS_PROPERTIES(test1 [test2...] PROPERTIES prop1 value1 prop2" + " set_tests_properties(test1 [test2...] PROPERTIES prop1 value1 prop2" " value2)\n" "Set a property for the tests. If the property is not found, CMake " "will report an error. The properties include:\n" diff --git a/Source/cmSiteNameCommand.h b/Source/cmSiteNameCommand.h index 465aeda..7c03268 100644 --- a/Source/cmSiteNameCommand.h +++ b/Source/cmSiteNameCommand.h @@ -49,7 +49,7 @@ public: /** * The name of the command as specified in CMakeList.txt. */ - virtual const char* GetName() {return "SITE_NAME";} + virtual const char* GetName() {return "site_name";} /** * Succinct documentation. @@ -65,7 +65,7 @@ public: virtual const char* GetFullDocumentation() { return - " SITE_NAME(variable)\n"; + " site_name(variable)\n"; } cmTypeMacro(cmSiteNameCommand, cmCommand); diff --git a/Source/cmSourceGroupCommand.h b/Source/cmSourceGroupCommand.h index 0b95605..5d56bf7 100644 --- a/Source/cmSourceGroupCommand.h +++ b/Source/cmSourceGroupCommand.h @@ -45,7 +45,7 @@ public: /** * The name of the command as specified in CMakeList.txt. */ - virtual const char* GetName() {return "SOURCE_GROUP";} + virtual const char* GetName() {return "source_group";} /** * Succinct documentation. @@ -61,7 +61,7 @@ public: virtual const char* GetFullDocumentation() { return - " SOURCE_GROUP(name [REGULAR_EXPRESSION regex] " + " source_group(name [REGULAR_EXPRESSION regex] " "[FILES src1 src2 ...])\n" "Defines a group into which sources will be placed in project files. " "This is mainly used to setup file tabs in Visual Studio. " @@ -71,10 +71,10 @@ public: "group explicitly lists the file, the LAST group whose regular " "expression matches the file will be favored.\n" "The name of the group may contain backslashes to specify subgroups:\n" - " SOURCE_GROUP(outer\\\\inner ...)\n" + " source_group(outer\\\\inner ...)\n" "For backwards compatibility, this command is also supports the " "format:\n" - " SOURCE_GROUP(name regex)"; + " source_group(name regex)"; } cmTypeMacro(cmSourceGroupCommand, cmCommand); diff --git a/Source/cmStringCommand.h b/Source/cmStringCommand.h index 78ddcea..6a415d4 100644 --- a/Source/cmStringCommand.h +++ b/Source/cmStringCommand.h @@ -54,7 +54,7 @@ public: /** * The name of the command as specified in CMakeList.txt. */ - virtual const char* GetName() { return "STRING";} + virtual const char* GetName() { return "string";} /** * Succinct documentation. @@ -70,29 +70,29 @@ public: virtual const char* GetFullDocumentation() { return - " STRING(REGEX MATCH \n" + " string(REGEX MATCH \n" "