#.rst: # CPackRPM # -------- # # The built in (binary) CPack RPM generator (Unix only) # # Variables specific to CPack RPM generator # ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ # # CPackRPM may be used to create RPM packages using :module:`CPack`. # CPackRPM is a :module:`CPack` generator thus it uses the ``CPACK_XXX`` # variables used by :module:`CPack`. # # CPackRPM has specific features which are controlled by the specifics # :code:`CPACK_RPM_XXX` variables. # # :code:`CPACK_RPM__XXXX` variables may be used in order to have # **component** specific values. Note however that ```` refers to the # **grouping name** written in upper case. It may be either a component name or # a component GROUP name. Usually those variables correspond to RPM spec file # entities. One may find information about spec files here # http://www.rpm.org/wiki/Docs # # .. note:: # # `` part of variables is preferred to be in upper case (for e.g. if # component is named `foo` then use `CPACK_RPM_FOO_XXXX` variable name format) # as is with other `CPACK__XXXX` variables. # For the purposes of back compatibility (CMake/CPack version 3.5 and lower) # support for same cased component (e.g. `fOo` would be used as # `CPACK_RPM_fOo_XXXX`) is still supported for variables defined in older # versions of CMake/CPack but is not guaranteed for variables that # will be added in the future. For the sake of back compatibility same cased # component variables also override upper cased versions where both are # present. # # Here are some CPackRPM wiki resources that are here for historic reasons and # are no longer maintained but may still prove useful: # # - https://cmake.org/Wiki/CMake:CPackConfiguration # - https://cmake.org/Wiki/CMake:CPackPackageGenerators#RPM_.28Unix_Only.29 # # List of CPackRPM specific variables: # # .. variable:: CPACK_RPM_PACKAGE_COMPONENT # # Enable component packaging for CPackRPM # # * Mandatory : NO # * Default : OFF # # If enabled (ON) multiple packages are generated. By default a single package # containing files of all components is generated. # # .. variable:: CPACK_RPM_PACKAGE_SUMMARY # CPACK_RPM__PACKAGE_SUMMARY # # The RPM package summary. # # * Mandatory : YES # * Default : :variable:`CPACK_PACKAGE_DESCRIPTION_SUMMARY` # # .. variable:: CPACK_RPM_DEBUGINFO_PACKAGE # CPACK_RPM__DEBUGINFO_PACKAGE # # Option to additionally generate debuginfo RPM package(s). # # * Mandatory : NO # * Default : OFF # # .. variable:: CPACK_RPM_PACKAGE_NAME # CPACK_RPM__PACKAGE_NAME # # The RPM package name. # # * Mandatory : YES # * Default : :variable:`CPACK_PACKAGE_NAME` # # .. variable:: CPACK_RPM_FILE_NAME # CPACK_RPM__FILE_NAME # # Package file name. # # * Mandatory : YES # * Default : ``[-].rpm`` with spaces # replaced by '-' # # This may be set to ``RPM-DEFAULT`` to allow rpmbuild tool to generate package # file name by itself. # Alternatively provided package file name must end with ``.rpm`` suffix. # # .. note:: # # By using user provided spec file, rpm macro extensions such as for # generating debuginfo packages or by simply using multiple components more # than one rpm file may be generated, either from a single spec file or from # multiple spec files (each component execution produces it's own spec file). # In such cases duplicate file names may occur as a result of this variable # setting or spec file content structure. Duplicate files get overwritten # and it is up to the packager to set the variables in a manner that will # prevent such errors. # # .. variable:: CPACK_RPM_PACKAGE_VERSION # # The RPM package version. # # * Mandatory : YES # * Default : :variable:`CPACK_PACKAGE_VERSION` # # .. variable:: CPACK_RPM_PACKAGE_ARCHITECTURE # CPACK_RPM__PACKAGE_ARCHITECTURE # # The RPM package architecture. # # * Mandatory : YES # * Default : Native architecture output by ``uname -m`` # # This may be set to ``noarch`` if you know you are building a noarch package. # # .. variable:: CPACK_RPM_PACKAGE_RELEASE # # The RPM package release. # # * Mandatory : YES # * Default : 1 # # This is the numbering of the RPM package itself, i.e. the version of the # packaging and not the version of the content (see # :variable:`CPACK_RPM_PACKAGE_VERSION`). One may change the default value if # the previous packaging was buggy and/or you want to put here a fancy Linux # distro specific numbering. # # .. note:: # # This is the string that goes into the RPM ``Release:`` field. Some distros # (e.g. Fedora, CentOS) require ``1%{?dist}`` format and not just a number. # ``%{?dist}`` part can be added by setting :variable:`CPACK_RPM_PACKAGE_RELEASE_DIST`. # # .. variable:: CPACK_RPM_PACKAGE_RELEASE_DIST # # The dist tag that is added RPM ``Release:`` field. # # * Mandatory : NO # * Default : OFF # # This is the reported ``%{dist}`` tag from the current distribution or empty # ``%{dist}`` if RPM macro is not set. If this variable is set then RPM # ``Release:`` field value is set to ``${CPACK_RPM_PACKAGE_RELEASE}%{?dist}``. # # .. variable:: CPACK_RPM_PACKAGE_LICENSE # # The RPM package license policy. # # * Mandatory : YES # * Default : "unknown" # # .. variable:: CPACK_RPM_PACKAGE_GROUP # CPACK_RPM__PACKAGE_GROUP # # The RPM package group. # # * Mandatory : YES # * Default : "unknown" # # .. variable:: CPACK_RPM_PACKAGE_VENDOR # # The RPM package vendor. # # * Mandatory : YES # * Default : CPACK_PACKAGE_VENDOR if set or "unknown" # # .. variable:: CPACK_RPM_PACKAGE_URL # CPACK_RPM__PACKAGE_URL # # The projects URL. # # * Mandatory : NO # * Default : - # # .. variable:: CPACK_RPM_PACKAGE_DESCRIPTION # CPACK_RPM__PACKAGE_DESCRIPTION # # RPM package description. # # * Mandatory : YES # * Default : :variable:`CPACK_COMPONENT__DESCRIPTION` (component # based installers only) if set, :variable:`CPACK_PACKAGE_DESCRIPTION_FILE` # if set or "no package description available" # # .. variable:: CPACK_RPM_COMPRESSION_TYPE # # RPM compression type. # # * Mandatory : NO # * Default : - # # May be used to override RPM compression type to be used to build the # RPM. For example some Linux distribution now default to lzma or xz # compression whereas older cannot use such RPM. Using this one can enforce # compression type to be used. # # Possible values are: # # - lzma # - xz # - bzip2 # - gzip # # .. variable:: CPACK_RPM_PACKAGE_AUTOREQ # CPACK_RPM__PACKAGE_AUTOREQ # # RPM spec autoreq field. # # * Mandatory : NO # * Default : - # # May be used to enable (1, yes) or disable (0, no) automatic shared libraries # dependency detection. Dependencies are added to requires list. # # .. note:: # # By default automatic dependency detection is enabled by rpm generator. # # .. variable:: CPACK_RPM_PACKAGE_AUTOPROV # CPACK_RPM__PACKAGE_AUTOPROV # # RPM spec autoprov field. # # * Mandatory : NO # * Default : - # # May be used to enable (1, yes) or disable (0, no) automatic listing of shared # libraries that are provided by the package. Shared libraries are added to # provides list. # # .. note:: # # By default automatic provides detection is enabled by rpm generator. # # .. variable:: CPACK_RPM_PACKAGE_AUTOREQPROV # CPACK_RPM__PACKAGE_AUTOREQPROV # # RPM spec autoreqprov field. # # * Mandatory : NO # * Default : - # # Variable enables/disables autoreq and autoprov at the same time. # See :variable:`CPACK_RPM_PACKAGE_AUTOREQ` and :variable:`CPACK_RPM_PACKAGE_AUTOPROV` # for more details. # # .. note:: # # By default automatic detection feature is enabled by rpm. # # .. variable:: CPACK_RPM_PACKAGE_REQUIRES # CPACK_RPM__PACKAGE_REQUIRES # # RPM spec requires field. # # * Mandatory : NO # * Default : - # # May be used to set RPM dependencies (requires). Note that you must enclose # the complete requires string between quotes, for example:: # # set(CPACK_RPM_PACKAGE_REQUIRES "python >= 2.5.0, cmake >= 2.8") # # The required package list of an RPM file could be printed with:: # # rpm -qp --requires file.rpm # # .. variable:: CPACK_RPM_PACKAGE_CONFLICTS # CPACK_RPM__PACKAGE_CONFLICTS # # RPM spec conflicts field. # # * Mandatory : NO # * Default : - # # May be used to set negative RPM dependencies (conflicts). Note that you must # enclose the complete requires string between quotes, for example:: # # set(CPACK_RPM_PACKAGE_CONFLICTS "libxml2") # # The conflicting package list of an RPM file could be printed with:: # # rpm -qp --conflicts file.rpm # # .. variable:: CPACK_RPM_PACKAGE_REQUIRES_PRE # CPACK_RPM__PACKAGE_REQUIRES_PRE # # RPM spec requires(pre) field. # # * Mandatory : NO # * Default : - # # May be used to set RPM preinstall dependencies (requires(pre)). Note that # you must enclose the complete requires string between quotes, for example:: # # set(CPACK_RPM_PACKAGE_REQUIRES_PRE "shadow-utils, initscripts") # # .. variable:: CPACK_RPM_PACKAGE_REQUIRES_POST # CPACK_RPM__PACKAGE_REQUIRES_POST # # RPM spec requires(post) field. # # * Mandatory : NO # * Default : - # # May be used to set RPM postinstall dependencies (requires(post)). Note that # you must enclose the complete requires string between quotes, for example:: # # set(CPACK_RPM_PACKAGE_REQUIRES_POST "shadow-utils, initscripts") # # .. variable:: CPACK_RPM_PACKAGE_REQUIRES_POSTUN # CPACK_RPM__PACKAGE_REQUIRES_POSTUN # # RPM spec requires(postun) field. # # * Mandatory : NO # * Default : - # # May be used to set RPM postuninstall dependencies (requires(postun)). Note # that you must enclose the complete requires string between quotes, for # example:: # # set(CPACK_RPM_PACKAGE_REQUIRES_POSTUN "shadow-utils, initscripts") # # .. variable:: CPACK_RPM_PACKAGE_REQUIRES_PREUN # CPACK_RPM__PACKAGE_REQUIRES_PREUN # # RPM spec requires(preun) field. # # * Mandatory : NO # * Default : - # # May be used to set RPM preuninstall dependencies (requires(preun)). Note that # you must enclose the complete requires string between quotes, for example:: # # set(CPACK_RPM_PACKAGE_REQUIRES_PREUN "shadow-utils, initscripts") # # .. variable:: CPACK_RPM_PACKAGE_SUGGESTS # CPACK_RPM__PACKAGE_SUGGESTS # # RPM spec suggest field. # # * Mandatory : NO # * Default : - # # May be used to set weak RPM dependencies (suggests). Note that you must # enclose the complete requires string between quotes. # # .. variable:: CPACK_RPM_PACKAGE_PROVIDES # CPACK_RPM__PACKAGE_PROVIDES # # RPM spec provides field. # # * Mandatory : NO # * Default : - # # May be used to set RPM dependencies (provides). The provided package list # of an RPM file could be printed with:: # # rpm -qp --provides file.rpm # # .. variable:: CPACK_RPM_PACKAGE_OBSOLETES # CPACK_RPM__PACKAGE_OBSOLETES # # RPM spec obsoletes field. # # * Mandatory : NO # * Default : - # # May be used to set RPM packages that are obsoleted by this one. # # .. variable:: CPACK_RPM_PACKAGE_RELOCATABLE # # build a relocatable RPM. # # * Mandatory : NO # * Default : CPACK_PACKAGE_RELOCATABLE # # If this variable is set to TRUE or ON CPackRPM will try # to build a relocatable RPM package. A relocatable RPM may # be installed using:: # # rpm --prefix or --relocate # # in order to install it at an alternate place see rpm(8). Note that # currently this may fail if :variable:`CPACK_SET_DESTDIR` is set to ``ON``. If # :variable:`CPACK_SET_DESTDIR` is set then you will get a warning message but # if there is file installed with absolute path you'll get unexpected behavior. # # .. variable:: CPACK_RPM_SPEC_INSTALL_POST # # Deprecated - use :variable:`CPACK_RPM_POST_INSTALL_SCRIPT_FILE` instead. # # * Mandatory : NO # * Default : - # * Deprecated: YES # # This way of specifying post-install script is deprecated, use # :variable:`CPACK_RPM_POST_INSTALL_SCRIPT_FILE`. # May be used to set an RPM post-install command inside the spec file. # For example setting it to ``/bin/true`` may be used to prevent # rpmbuild to strip binaries. # # .. variable:: CPACK_RPM_SPEC_MORE_DEFINE # # RPM extended spec definitions lines. # # * Mandatory : NO # * Default : - # # May be used to add any ``%define`` lines to the generated spec file. # # .. variable:: CPACK_RPM_PACKAGE_DEBUG # # Toggle CPackRPM debug output. # # * Mandatory : NO # * Default : - # # May be set when invoking cpack in order to trace debug information # during CPack RPM run. For example you may launch CPack like this:: # # cpack -D CPACK_RPM_PACKAGE_DEBUG=1 -G RPM # # .. variable:: CPACK_RPM_USER_BINARY_SPECFILE # CPACK_RPM__USER_BINARY_SPECFILE # # A user provided spec file. # # * Mandatory : NO # * Default : - # # May be set by the user in order to specify a USER binary spec file # to be used by CPackRPM instead of generating the file. # The specified file will be processed by configure_file( @ONLY). # # .. variable:: CPACK_RPM_GENERATE_USER_BINARY_SPECFILE_TEMPLATE # # Spec file template. # # * Mandatory : NO # * Default : - # # If set CPack will generate a template for USER specified binary # spec file and stop with an error. For example launch CPack like this:: # # cpack -D CPACK_RPM_GENERATE_USER_BINARY_SPECFILE_TEMPLATE=1 -G RPM # # The user may then use this file in order to hand-craft is own # binary spec file which may be used with # :variable:`CPACK_RPM_USER_BINARY_SPECFILE`. # # .. variable:: CPACK_RPM_PRE_INSTALL_SCRIPT_FILE # CPACK_RPM_PRE_UNINSTALL_SCRIPT_FILE # # Path to file containing pre (un)install script. # # * Mandatory : NO # * Default : - # # May be used to embed a pre (un)installation script in the spec file. # The referred script file (or both) will be read and directly # put after the ``%pre`` or ``%preun`` section # If :variable:`CPACK_RPM_PACKAGE_COMPONENT` is set to ON the (un)install # script for each component can be overridden with # ``CPACK_RPM__PRE_INSTALL_SCRIPT_FILE`` and # ``CPACK_RPM__PRE_UNINSTALL_SCRIPT_FILE``. # One may verify which scriptlet has been included with:: # # rpm -qp --scripts package.rpm # # .. variable:: CPACK_RPM_POST_INSTALL_SCRIPT_FILE # CPACK_RPM_POST_UNINSTALL_SCRIPT_FILE # # Path to file containing post (un)install script. # # * Mandatory : NO # * Default : - # # May be used to embed a post (un)installation script in the spec file. # The referred script file (or both) will be read and directly # put after the ``%post`` or ``%postun`` section. # If :variable:`CPACK_RPM_PACKAGE_COMPONENT` is set to ON the (un)install # script for each component can be overridden with # ``CPACK_RPM__POST_INSTALL_SCRIPT_FILE`` and # ``CPACK_RPM__POST_UNINSTALL_SCRIPT_FILE``. # One may verify which scriptlet has been included with:: # # rpm -qp --scripts package.rpm # # .. variable:: CPACK_RPM_USER_FILELIST # CPACK_RPM__USER_FILELIST # # * Mandatory : NO # * Default : - # # May be used to explicitly specify ``%()`` file line # in the spec file. Like ``%config(noreplace)`` or any other directive # that be found in the ``%files`` section. Since CPackRPM is generating # the list of files (and directories) the user specified files of # the ``CPACK_RPM__USER_FILELIST`` list will be removed from # the generated list. # # .. variable:: CPACK_RPM_CHANGELOG_FILE # # RPM changelog file. # # * Mandatory : NO # * Default : - # # May be used to embed a changelog in the spec file. # The referred file will be read and directly put after the ``%changelog`` # section. # # .. variable:: CPACK_RPM_EXCLUDE_FROM_AUTO_FILELIST # # list of path to be excluded. # # * Mandatory : NO # * Default : /etc /etc/init.d /usr /usr/share /usr/share/doc /usr/bin /usr/lib /usr/lib64 /usr/include # # May be used to exclude path (directories or files) from the auto-generated # list of paths discovered by CPack RPM. The defaut value contains a # reasonable set of values if the variable is not defined by the user. If the # variable is defined by the user then CPackRPM will NOT any of the default # path. If you want to add some path to the default list then you can use # :variable:`CPACK_RPM_EXCLUDE_FROM_AUTO_FILELIST_ADDITION` variable. # # .. variable:: CPACK_RPM_EXCLUDE_FROM_AUTO_FILELIST_ADDITION # # additional list of path to be excluded. # # * Mandatory : NO # * Default : - # # May be used to add more exclude path (directories or files) from the initial # default list of excluded paths. See # :variable:`CPACK_RPM_EXCLUDE_FROM_AUTO_FILELIST`. # # .. variable:: CPACK_RPM_RELOCATION_PATHS # # Packages relocation paths list. # # * Mandatory : NO # * Default : - # # May be used to specify more than one relocation path per relocatable RPM. # Variable contains a list of relocation paths that if relative are prefixed # by the value of :variable:`CPACK_RPM__PACKAGE_PREFIX` or by the # value of :variable:`CPACK_PACKAGING_INSTALL_PREFIX` if the component version # is not provided. # Variable is not component based as its content can be used to set a different # path prefix for e.g. binary dir and documentation dir at the same time. # Only prefixes that are required by a certain component are added to that # component - component must contain at least one file/directory/symbolic link # with :variable:`CPACK_RPM_RELOCATION_PATHS` prefix for a certain relocation # path to be added. Package will not contain any relocation paths if there are # no files/directories/symbolic links on any of the provided prefix locations. # Packages that either do not contain any relocation paths or contain # files/directories/symbolic links that are outside relocation paths print # out an ``AUTHOR_WARNING`` that RPM will be partially relocatable. # # .. variable:: CPACK_RPM__PACKAGE_PREFIX # # Per component relocation path install prefix. # # * Mandatory : NO # * Default : CPACK_PACKAGING_INSTALL_PREFIX # # May be used to set per component :variable:`CPACK_PACKAGING_INSTALL_PREFIX` # for relocatable RPM packages. # # .. variable:: CPACK_RPM_NO_INSTALL_PREFIX_RELOCATION # CPACK_RPM_NO__INSTALL_PREFIX_RELOCATION # # Removal of default install prefix from relocation paths list. # # * Mandatory : NO # * Default : CPACK_PACKAGING_INSTALL_PREFIX or CPACK_RPM__PACKAGE_PREFIX # are treated as one of relocation paths # # May be used to remove CPACK_PACKAGING_INSTALL_PREFIX and CPACK_RPM__PACKAGE_PREFIX # from relocatable RPM prefix paths. # # .. variable:: CPACK_RPM_ADDITIONAL_MAN_DIRS # # * Mandatory : NO # * Default : - # # May be used to set additional man dirs that could potentially be compressed # by brp-compress RPM macro. Variable content must be a list of regular # expressions that point to directories containing man files or to man files # directly. Note that in order to compress man pages a path must also be # present in brp-compress RPM script and that brp-compress script must be # added to RPM configuration by the operating system. # # Regular expressions that are added by default were taken from brp-compress # RPM macro: # # - /usr/man/man.* # - /usr/man/.*/man.* # - /usr/info.* # - /usr/share/man/man.* # - /usr/share/man/.*/man.* # - /usr/share/info.* # - /usr/kerberos/man.* # - /usr/X11R6/man/man.* # - /usr/lib/perl5/man/man.* # - /usr/share/doc/.*/man/man.* # - /usr/lib/.*/man/man.* # # .. variable:: CPACK_RPM_DEFAULT_USER # CPACK_RPM__DEFAULT_USER # # default user ownership of RPM content # # * Mandatory : NO # * Default : root # # Value should be user name and not UID. # Note that must be in upper-case. # # .. variable:: CPACK_RPM_DEFAULT_GROUP # CPACK_RPM__DEFAULT_GROUP # # default group ownership of RPM content # # * Mandatory : NO # * Default : root # # Value should be group name and not GID. # Note that must be in upper-case. # # .. variable:: CPACK_RPM_DEFAULT_FILE_PERMISSIONS # CPACK_RPM__DEFAULT_FILE_PERMISSIONS # # default permissions used for packaged files # # * Mandatory : NO # * Default : - (system default) # # Accepted values are lists with ``PERMISSIONS``. Valid permissions # are: # # - OWNER_READ # - OWNER_WRITE # - OWNER_EXECUTE # - GROUP_READ # - GROUP_WRITE # - GROUP_EXECUTE # - WORLD_READ # - WORLD_WRITE # - WORLD_EXECUTE # # Note that must be in upper-case. # # .. variable:: CPACK_RPM_DEFAULT_DIR_PERMISSIONS # CPACK_RPM__DEFAULT_DIR_PERMISSIONS # # default permissions used for packaged directories # # * Mandatory : NO # * Default : - (system default) # # Accepted values are lists with PERMISSIONS. Valid permissions # are the same as for :variable:`CPACK_RPM_DEFAULT_FILE_PERMISSIONS`. # Note that must be in upper-case. # # Packaging of Symbolic Links # ^^^^^^^^^^^^^^^^^^^^^^^^^^^ # # CPackRPM supports packaging of symbolic links:: # # execute_process(COMMAND ${CMAKE_COMMAND} # -E create_symlink ) # install(FILES ${CMAKE_CURRENT_BINARY_DIR}/ # DESTINATION COMPONENT libraries) # # Symbolic links will be optimized (paths will be shortened if possible) # before being added to the package or if multiple relocation paths are # detected, a post install symlink relocation script will be generated. # # Symbolic links may point to locations that are not packaged by the same # package (either a different component or even not packaged at all) but # those locations will be treated as if they were a part of the package # while determining if symlink should be either created or present in a # post install script - depending on relocation paths. # # Symbolic links that point to locations outside packaging path produce a # warning and are treated as non relocatable permanent symbolic links. # # Currently there are a few limitations though: # # * For component based packaging component interdependency is not checked # when processing symbolic links. Symbolic links pointing to content of # a different component are treated the same way as if pointing to location # that will not be packaged. # # * Symbolic links pointing to a location through one or more intermediate # symbolic links will not be handled differently - if the intermediate # symbolic link(s) is also on a relocatable path, relocating it during # package installation may cause initial symbolic link to point to an # invalid location. # # Packaging of sources (SRPM) # ^^^^^^^^^^^^^^^^^^^^^^^^^^^ # # SRPM packaging is enabled by setting :variable:`CPACK_RPM_PACKAGE_SOURCES` # variable while usually using :variable:`CPACK_INSTALLED_DIRECTORIES` variable # to provide directory containing CMakeLists.txt and source files. # # For CMake projects SRPM package would be product by executing: # # ``cpack -G RPM --config ./CPackSourceConfig.cmake`` # # .. note:: # # Produced SRPM package is expected to be built with :manual:`cmake(1)` executable # and packaged with :manual:`cpack(1)` executable so CMakeLists.txt has to be # located in root source directory and must be able to generate binary rpm # packages by executing ``cpack -G`` command. The two executables as well as # rpmbuild must also be present when generating binary rpm packages from the # produced SRPM package. # # Once the SRPM package is generated it can be used to generate binary packages # by creating a directory structure for rpm generation and executing rpmbuild # tool: # # ``mkdir -p build_dir/{BUILD,BUILDROOT,RPMS,SOURCES,SPECS,SRPMS}`` # ``rpmbuild --define "_topdir " --rebuild `` # # Generated packages will be located in build_dir/RPMS directory or its sub # directories. # # .. note:: # # SRPM package internally uses CPack/RPM generator to generate binary packages # so CMakeScripts.txt can decide during the SRPM to binary rpm generation step # what content the package(s) should have as well as how they should be packaged # (monolithic or components). CMake can decide this for e.g. by reading environment # variables set by the package manager before starting the process of generating # binary rpm packages. This way a single SRPM package can be used to produce # different binary rpm packages on different platforms depending on the platform's # packaging rules. # # Source RPM packaging has it's own set of variables: # # .. variable:: CPACK_RPM_PACKAGE_SOURCES # # Should the content be packaged as a source rpm (default is binary rpm). # # * Mandatory : NO # * Default : OFF # # .. note:: # # For cmake projects :variable:`CPACK_RPM_PACKAGE_SOURCES` variable is set # to ``OFF`` in CPackConfig.cmake and ``ON`` in CPackSourceConfig.cmake # generated files. # # .. variable:: CPACK_RPM_SOURCE_PKG_BUILD_PARAMS # # Additional command-line parameters provided to :manual:`cmake(1)` executable. # # * Mandatory : NO # * Default : - # # .. variable:: CPACK_RPM_SOURCE_PKG_PACKAGING_INSTALL_PREFIX # # Packaging install prefix that would be provided in :variable:`CPACK_PACKAGING_INSTALL_PREFIX` # variable for producing binary RPM packages. # # * Mandatory : YES # * Default : "/" #============================================================================= # Copyright 2007-2016 Kitware, Inc. # # Distributed under the OSI-approved BSD License (the "License"); # see accompanying file Copyright.txt for details. # # This software is distributed WITHOUT ANY WARRANTY; without even the # implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. # See the License for more information. #============================================================================= # (To distribute this file outside of CMake, substitute the full # License text for the above reference.) # Author: Eric Noulard with the help of Alexander Neundorf. function(get_unix_permissions_octal_notation PERMISSIONS_VAR RETURN_VAR) set(PERMISSIONS ${${PERMISSIONS_VAR}}) list(LENGTH PERMISSIONS PERM_LEN_PRE) list(REMOVE_DUPLICATES PERMISSIONS) list(LENGTH PERMISSIONS PERM_LEN_POST) if(NOT ${PERM_LEN_PRE} EQUAL ${PERM_LEN_POST}) message(FATAL_ERROR "${PERMISSIONS_VAR} contains duplicate values.") endif() foreach(PERMISSION_TYPE "OWNER" "GROUP" "WORLD") set(${PERMISSION_TYPE}_PERMISSIONS 0) foreach(PERMISSION ${PERMISSIONS}) if("${PERMISSION}" STREQUAL "${PERMISSION_TYPE}_READ") math(EXPR ${PERMISSION_TYPE}_PERMISSIONS "${${PERMISSION_TYPE}_PERMISSIONS} + 4") elseif("${PERMISSION}" STREQUAL "${PERMISSION_TYPE}_WRITE") math(EXPR ${PERMISSION_TYPE}_PERMISSIONS "${${PERMISSION_TYPE}_PERMISSIONS} + 2") elseif("${PERMISSION}" STREQUAL "${PERMISSION_TYPE}_EXECUTE") math(EXPR ${PERMISSION_TYPE}_PERMISSIONS "${${PERMISSION_TYPE}_PERMISSIONS} + 1") elseif(PERMISSION MATCHES "${PERMISSION_TYPE}.*") message(FATAL_ERROR "${PERMISSIONS_VAR} contains invalid values.") endif() endforeach() endforeach() set(${RETURN_VAR} "${OWNER_PERMISSIONS}${GROUP_PERMISSIONS}${WORLD_PERMISSIONS}" PARENT_SCOPE) endfunction() function(cpack_rpm_prepare_relocation_paths) # set appropriate prefix, remove possible trailing slash and convert backslashes to slashes if(CPACK_RPM_${CPACK_RPM_PACKAGE_COMPONENT}_PACKAGE_PREFIX) file(TO_CMAKE_PATH "${CPACK_RPM_${CPACK_RPM_PACKAGE_COMPONENT}_PACKAGE_PREFIX}" PATH_PREFIX) elseif(CPACK_RPM_${CPACK_RPM_PACKAGE_COMPONENT_UPPER}_PACKAGE_PREFIX) file(TO_CMAKE_PATH "${CPACK_RPM_${CPACK_RPM_PACKAGE_COMPONENT_UPPER}_PACKAGE_PREFIX}" PATH_PREFIX) else() file(TO_CMAKE_PATH "${CPACK_PACKAGING_INSTALL_PREFIX}" PATH_PREFIX) endif() set(RPM_RELOCATION_PATHS "${CPACK_RPM_RELOCATION_PATHS}") list(REMOVE_DUPLICATES RPM_RELOCATION_PATHS) # set base path prefix if(EXISTS "${WDIR}/${PATH_PREFIX}") if(NOT CPACK_RPM_NO_INSTALL_PREFIX_RELOCATION AND NOT CPACK_RPM_NO_${CPACK_RPM_PACKAGE_COMPONENT}_INSTALL_PREFIX_RELOCATION AND NOT CPACK_RPM_NO_${CPACK_RPM_PACKAGE_COMPONENT_UPPER}_INSTALL_PREFIX_RELOCATION) string(APPEND TMP_RPM_PREFIXES "Prefix: ${PATH_PREFIX}\n") list(APPEND RPM_USED_PACKAGE_PREFIXES "${PATH_PREFIX}") if(CPACK_RPM_PACKAGE_DEBUG) message("CPackRPM:Debug: removing '${PATH_PREFIX}' from relocation paths") endif() endif() endif() # set other path prefixes foreach(RELOCATION_PATH ${RPM_RELOCATION_PATHS}) if(IS_ABSOLUTE "${RELOCATION_PATH}") set(PREPARED_RELOCATION_PATH "${RELOCATION_PATH}") else() set(PREPARED_RELOCATION_PATH "${PATH_PREFIX}/${RELOCATION_PATH}") endif() if(EXISTS "${WDIR}/${PREPARED_RELOCATION_PATH}") string(APPEND TMP_RPM_PREFIXES "Prefix: ${PREPARED_RELOCATION_PATH}\n") list(APPEND RPM_USED_PACKAGE_PREFIXES "${PREPARED_RELOCATION_PATH}") endif() endforeach() # warn about all the paths that are not relocatable cmake_policy(PUSH) # Tell file(GLOB_RECURSE) not to follow directory symlinks # even if the project does not set this policy to NEW. cmake_policy(SET CMP0009 NEW) file(GLOB_RECURSE FILE_PATHS_ "${WDIR}/*") cmake_policy(POP) foreach(TMP_PATH ${FILE_PATHS_}) string(LENGTH "${WDIR}" WDIR_LEN) string(SUBSTRING "${TMP_PATH}" ${WDIR_LEN} -1 TMP_PATH) unset(TMP_PATH_FOUND_) foreach(RELOCATION_PATH ${RPM_USED_PACKAGE_PREFIXES}) file(RELATIVE_PATH REL_PATH_ "${RELOCATION_PATH}" "${TMP_PATH}") string(SUBSTRING "${REL_PATH_}" 0 2 PREFIX_) if(NOT "${PREFIX_}" STREQUAL "..") set(TPM_PATH_FOUND_ TRUE) break() endif() endforeach() if(NOT TPM_PATH_FOUND_) message(AUTHOR_WARNING "CPackRPM:Warning: Path ${TMP_PATH} is not on one of the relocatable paths! Package will be partially relocatable.") endif() endforeach() set(RPM_USED_PACKAGE_PREFIXES "${RPM_USED_PACKAGE_PREFIXES}" PARENT_SCOPE) set(TMP_RPM_PREFIXES "${TMP_RPM_PREFIXES}" PARENT_SCOPE) endfunction() function(cpack_rpm_prepare_content_list) # get files list cmake_policy(PUSH) cmake_policy(SET CMP0009 NEW) file(GLOB_RECURSE CPACK_RPM_INSTALL_FILES LIST_DIRECTORIES true RELATIVE "${WDIR}" "${WDIR}/*") cmake_policy(POP) set(CPACK_RPM_INSTALL_FILES "/${CPACK_RPM_INSTALL_FILES}") string(REPLACE ";" ";/" CPACK_RPM_INSTALL_FILES "${CPACK_RPM_INSTALL_FILES}") # if we are creating a relocatable package, omit parent directories of # CPACK_RPM_PACKAGE_PREFIX. This is achieved by building a "filter list" # which is passed to the find command that generates the content-list if(CPACK_RPM_PACKAGE_RELOCATABLE) # get a list of the elements in CPACK_RPM_PACKAGE_PREFIXES that are # destinct parent paths of other relocation paths and remove the # final element (so the install-prefix dir itself is not omitted # from the RPM's content-list) list(SORT RPM_USED_PACKAGE_PREFIXES) set(_DISTINCT_PATH "NOT_SET") foreach(_RPM_RELOCATION_PREFIX ${RPM_USED_PACKAGE_PREFIXES}) if(NOT "${_RPM_RELOCATION_PREFIX}" MATCHES "${_DISTINCT_PATH}/.*") set(_DISTINCT_PATH "${_RPM_RELOCATION_PREFIX}") string(REPLACE "/" ";" _CPACK_RPM_PACKAGE_PREFIX_ELEMS " ${_RPM_RELOCATION_PREFIX}") cmake_policy(PUSH) cmake_policy(SET CMP0007 NEW) list(REMOVE_AT _CPACK_RPM_PACKAGE_PREFIX_ELEMS -1) cmake_policy(POP) unset(_TMP_LIST) # Now generate all of the parent dirs of the relocation path foreach(_PREFIX_PATH_ELEM ${_CPACK_RPM_PACKAGE_PREFIX_ELEMS}) list(APPEND _TMP_LIST "${_PREFIX_PATH_ELEM}") string(REPLACE ";" "/" _OMIT_DIR "${_TMP_LIST}") separate_arguments(_OMIT_DIR) list(APPEND _RPM_DIRS_TO_OMIT ${_OMIT_DIR}) endforeach() endif() endforeach() endif() if(CPACK_RPM_PACKAGE_DEBUG) message("CPackRPM:Debug: Initial list of path to OMIT in RPM: ${_RPM_DIRS_TO_OMIT}") endif() if(NOT DEFINED CPACK_RPM_EXCLUDE_FROM_AUTO_FILELIST) set(CPACK_RPM_EXCLUDE_FROM_AUTO_FILELIST /etc /etc/init.d /usr /usr/share /usr/share/doc /usr/bin /usr/lib /usr/lib64 /usr/include) if(CPACK_RPM_EXCLUDE_FROM_AUTO_FILELIST_ADDITION) if(CPACK_RPM_PACKAGE_DEBUG) message("CPackRPM:Debug: Adding ${CPACK_RPM_EXCLUDE_FROM_AUTO_FILELIST_ADDITION} to builtin omit list.") endif() list(APPEND CPACK_RPM_EXCLUDE_FROM_AUTO_FILELIST "${CPACK_RPM_EXCLUDE_FROM_AUTO_FILELIST_ADDITION}") endif() endif() if(CPACK_RPM_EXCLUDE_FROM_AUTO_FILELIST) if(CPACK_RPM_PACKAGE_DEBUG) message("CPackRPM:Debug: CPACK_RPM_EXCLUDE_FROM_AUTO_FILELIST= ${CPACK_RPM_EXCLUDE_FROM_AUTO_FILELIST}") endif() list(APPEND _RPM_DIRS_TO_OMIT ${CPACK_RPM_EXCLUDE_FROM_AUTO_FILELIST}) endif() if(CPACK_RPM_PACKAGE_DEBUG) message("CPackRPM:Debug: Final list of path to OMIT in RPM: ${_RPM_DIRS_TO_OMIT}") endif() list(REMOVE_ITEM CPACK_RPM_INSTALL_FILES ${_RPM_DIRS_TO_OMIT}) # add man paths that will be compressed # (copied from /usr/lib/rpm/brp-compress - script that does the actual # compressing) list(APPEND MAN_LOCATIONS "/usr/man/man.*" "/usr/man/.*/man.*" "/usr/info.*" "/usr/share/man/man.*" "/usr/share/man/.*/man.*" "/usr/share/info.*" "/usr/kerberos/man.*" "/usr/X11R6/man/man.*" "/usr/lib/perl5/man/man.*" "/usr/share/doc/.*/man/man.*" "/usr/lib/.*/man/man.*") if(CPACK_RPM_ADDITIONAL_MAN_DIRS) if(CPACK_RPM_PACKAGE_DEBUG) message("CPackRPM:Debug: CPACK_RPM_ADDITIONAL_MAN_DIRS= ${CPACK_RPM_ADDITIONAL_MAN_DIRS}") endif() list(APPEND MAN_LOCATIONS ${CPACK_RPM_ADDITIONAL_MAN_DIRS}) endif() foreach(PACK_LOCATION IN LISTS CPACK_RPM_INSTALL_FILES) foreach(MAN_LOCATION IN LISTS MAN_LOCATIONS) # man pages are files inside a certain location if(PACK_LOCATION MATCHES "${MAN_LOCATION}/" AND NOT IS_DIRECTORY "${WDIR}${PACK_LOCATION}" AND NOT IS_SYMLINK "${WDIR}${PACK_LOCATION}") list(FIND CPACK_RPM_INSTALL_FILES "${PACK_LOCATION}" INDEX) # insert file location that covers compressed man pages # even if using a wildcard causes duplicates as those are # handled by RPM and we still keep the same file list # in spec file - wildcard only represents file type (e.g. .gz) list(INSERT CPACK_RPM_INSTALL_FILES ${INDEX} "${PACK_LOCATION}*") # remove file location that doesn't cover compressed man pages math(EXPR INDEX ${INDEX}+1) list(REMOVE_AT CPACK_RPM_INSTALL_FILES ${INDEX}) break() endif() endforeach() endforeach() set(CPACK_RPM_INSTALL_FILES "${CPACK_RPM_INSTALL_FILES}" PARENT_SCOPE) endfunction() function(cpack_rpm_symlink_get_relocation_prefixes LOCATION PACKAGE_PREFIXES RETURN_VARIABLE) foreach(PKG_PREFIX IN LISTS PACKAGE_PREFIXES) string(REGEX MATCH "^${PKG_PREFIX}/.*" FOUND_ "${LOCATION}") if(FOUND_) list(APPEND TMP_PREFIXES "${PKG_PREFIX}") endif() endforeach() set(${RETURN_VARIABLE} "${TMP_PREFIXES}" PARENT_SCOPE) endfunction() function(cpack_rpm_symlink_create_relocation_script PACKAGE_PREFIXES) list(LENGTH PACKAGE_PREFIXES LAST_INDEX) set(SORTED_PACKAGE_PREFIXES "${PACKAGE_PREFIXES}") list(SORT SORTED_PACKAGE_PREFIXES) list(REVERSE SORTED_PACKAGE_PREFIXES) math(EXPR LAST_INDEX ${LAST_INDEX}-1) foreach(SYMLINK_INDEX RANGE ${LAST_INDEX}) list(GET SORTED_PACKAGE_PREFIXES ${SYMLINK_INDEX} SRC_PATH) list(FIND PACKAGE_PREFIXES "${SRC_PATH}" SYMLINK_INDEX) # reverse magic string(LENGTH "${SRC_PATH}" SRC_PATH_LEN) set(PARTS_CNT 0) set(SCRIPT_PART "if [ \"$RPM_INSTALL_PREFIX${SYMLINK_INDEX}\" != \"${SRC_PATH}\" ]; then\n") # both paths relocated foreach(POINT_INDEX RANGE ${LAST_INDEX}) list(GET SORTED_PACKAGE_PREFIXES ${POINT_INDEX} POINT_PATH) list(FIND PACKAGE_PREFIXES "${POINT_PATH}" POINT_INDEX) # reverse magic string(LENGTH "${POINT_PATH}" POINT_PATH_LEN) if(_RPM_RELOCATION_SCRIPT_${SYMLINK_INDEX}_${POINT_INDEX}) if("${SYMLINK_INDEX}" EQUAL "${POINT_INDEX}") set(INDENT "") else() string(APPEND SCRIPT_PART " if [ \"$RPM_INSTALL_PREFIX${POINT_INDEX}\" != \"${POINT_PATH}\" ]; then\n") set(INDENT " ") endif() foreach(RELOCATION_NO IN LISTS _RPM_RELOCATION_SCRIPT_${SYMLINK_INDEX}_${POINT_INDEX}) math(EXPR PARTS_CNT ${PARTS_CNT}+1) math(EXPR RELOCATION_INDEX ${RELOCATION_NO}-1) list(GET _RPM_RELOCATION_SCRIPT_PAIRS ${RELOCATION_INDEX} RELOCATION_SCRIPT_PAIR) string(FIND "${RELOCATION_SCRIPT_PAIR}" ":" SPLIT_INDEX) math(EXPR SRC_PATH_END ${SPLIT_INDEX}-${SRC_PATH_LEN}) string(SUBSTRING ${RELOCATION_SCRIPT_PAIR} ${SRC_PATH_LEN} ${SRC_PATH_END} SYMLINK_) math(EXPR POINT_PATH_START ${SPLIT_INDEX}+1+${POINT_PATH_LEN}) string(SUBSTRING ${RELOCATION_SCRIPT_PAIR} ${POINT_PATH_START} -1 POINT_) string(APPEND SCRIPT_PART " ${INDENT}if [ -z \"$CPACK_RPM_RELOCATED_SYMLINK_${RELOCATION_INDEX}\" ]; then\n") string(APPEND SCRIPT_PART " ${INDENT}ln -s \"$RPM_INSTALL_PREFIX${POINT_INDEX}${POINT_}\" \"$RPM_INSTALL_PREFIX${SYMLINK_INDEX}${SYMLINK_}\"\n") string(APPEND SCRIPT_PART " ${INDENT}CPACK_RPM_RELOCATED_SYMLINK_${RELOCATION_INDEX}=true\n") string(APPEND SCRIPT_PART " ${INDENT}fi\n") endforeach() if(NOT "${SYMLINK_INDEX}" EQUAL "${POINT_INDEX}") string(APPEND SCRIPT_PART " fi\n") endif() endif() endforeach() # source path relocated if(_RPM_RELOCATION_SCRIPT_${SYMLINK_INDEX}_X) foreach(RELOCATION_NO IN LISTS _RPM_RELOCATION_SCRIPT_${SYMLINK_INDEX}_X) math(EXPR PARTS_CNT ${PARTS_CNT}+1) math(EXPR RELOCATION_INDEX ${RELOCATION_NO}-1) list(GET _RPM_RELOCATION_SCRIPT_PAIRS ${RELOCATION_INDEX} RELOCATION_SCRIPT_PAIR) string(FIND "${RELOCATION_SCRIPT_PAIR}" ":" SPLIT_INDEX) math(EXPR SRC_PATH_END ${SPLIT_INDEX}-${SRC_PATH_LEN}) string(SUBSTRING ${RELOCATION_SCRIPT_PAIR} ${SRC_PATH_LEN} ${SRC_PATH_END} SYMLINK_) math(EXPR POINT_PATH_START ${SPLIT_INDEX}+1) string(SUBSTRING ${RELOCATION_SCRIPT_PAIR} ${POINT_PATH_START} -1 POINT_) string(APPEND SCRIPT_PART " if [ -z \"$CPACK_RPM_RELOCATED_SYMLINK_${RELOCATION_INDEX}\" ]; then\n") string(APPEND SCRIPT_PART " ln -s \"${POINT_}\" \"$RPM_INSTALL_PREFIX${SYMLINK_INDEX}${SYMLINK_}\"\n") string(APPEND SCRIPT_PART " CPACK_RPM_RELOCATED_SYMLINK_${RELOCATION_INDEX}=true\n") string(APPEND SCRIPT_PART " fi\n") endforeach() endif() if(PARTS_CNT) set(SCRIPT "${SCRIPT_PART}") string(APPEND SCRIPT "fi\n") endif() endforeach() # point path relocated foreach(POINT_INDEX RANGE ${LAST_INDEX}) list(GET SORTED_PACKAGE_PREFIXES ${POINT_INDEX} POINT_PATH) list(FIND PACKAGE_PREFIXES "${POINT_PATH}" POINT_INDEX) # reverse magic string(LENGTH "${POINT_PATH}" POINT_PATH_LEN) if(_RPM_RELOCATION_SCRIPT_X_${POINT_INDEX}) string(APPEND SCRIPT "if [ \"$RPM_INSTALL_PREFIX${POINT_INDEX}\" != \"${POINT_PATH}\" ]; then\n") foreach(RELOCATION_NO IN LISTS _RPM_RELOCATION_SCRIPT_X_${POINT_INDEX}) math(EXPR RELOCATION_INDEX ${RELOCATION_NO}-1) list(GET _RPM_RELOCATION_SCRIPT_PAIRS ${RELOCATION_INDEX} RELOCATION_SCRIPT_PAIR) string(FIND "${RELOCATION_SCRIPT_PAIR}" ":" SPLIT_INDEX) string(SUBSTRING ${RELOCATION_SCRIPT_PAIR} 0 ${SPLIT_INDEX} SYMLINK_) math(EXPR POINT_PATH_START ${SPLIT_INDEX}+1+${POINT_PATH_LEN}) string(SUBSTRING ${RELOCATION_SCRIPT_PAIR} ${POINT_PATH_START} -1 POINT_) string(APPEND SCRIPT " if [ -z \"$CPACK_RPM_RELOCATED_SYMLINK_${RELOCATION_INDEX}\" ]; then\n") string(APPEND SCRIPT " ln -s \"$RPM_INSTALL_PREFIX${POINT_INDEX}${POINT_}\" \"${SYMLINK_}\"\n") string(APPEND SCRIPT " CPACK_RPM_RELOCATED_SYMLINK_${RELOCATION_INDEX}=true\n") string(APPEND SCRIPT " fi\n") endforeach() string(APPEND SCRIPT "fi\n") endif() endforeach() # no path relocated if(_RPM_RELOCATION_SCRIPT_X_X) foreach(RELOCATION_NO IN LISTS _RPM_RELOCATION_SCRIPT_X_X) math(EXPR RELOCATION_INDEX ${RELOCATION_NO}-1) list(GET _RPM_RELOCATION_SCRIPT_PAIRS ${RELOCATION_INDEX} RELOCATION_SCRIPT_PAIR) string(FIND "${RELOCATION_SCRIPT_PAIR}" ":" SPLIT_INDEX) string(SUBSTRING ${RELOCATION_SCRIPT_PAIR} 0 ${SPLIT_INDEX} SYMLINK_) math(EXPR POINT_PATH_START ${SPLIT_INDEX}+1) string(SUBSTRING ${RELOCATION_SCRIPT_PAIR} ${POINT_PATH_START} -1 POINT_) string(APPEND SCRIPT "if [ -z \"$CPACK_RPM_RELOCATED_SYMLINK_${RELOCATION_INDEX}\" ]; then\n") string(APPEND SCRIPT " ln -s \"${POINT_}\" \"${SYMLINK_}\"\n") string(APPEND SCRIPT "fi\n") endforeach() endif() set(RPM_SYMLINK_POSTINSTALL "${SCRIPT}" PARENT_SCOPE) endfunction() function(cpack_rpm_symlink_add_for_relocation_script PACKAGE_PREFIXES SYMLINK SYMLINK_RELOCATION_PATHS POINT POINT_RELOCATION_PATHS) list(LENGTH SYMLINK_RELOCATION_PATHS SYMLINK_PATHS_COUTN) list(LENGTH POINT_RELOCATION_PATHS POINT_PATHS_COUNT) list(APPEND _RPM_RELOCATION_SCRIPT_PAIRS "${SYMLINK}:${POINT}") list(LENGTH _RPM_RELOCATION_SCRIPT_PAIRS PAIR_NO) if(SYMLINK_PATHS_COUTN) foreach(SYMLINK_RELOC_PATH IN LISTS SYMLINK_RELOCATION_PATHS) list(FIND PACKAGE_PREFIXES "${SYMLINK_RELOC_PATH}" SYMLINK_INDEX) # source path relocated list(APPEND _RPM_RELOCATION_SCRIPT_${SYMLINK_INDEX}_X "${PAIR_NO}") list(APPEND RELOCATION_VARS "_RPM_RELOCATION_SCRIPT_${SYMLINK_INDEX}_X") foreach(POINT_RELOC_PATH IN LISTS POINT_RELOCATION_PATHS) list(FIND PACKAGE_PREFIXES "${POINT_RELOC_PATH}" POINT_INDEX) # both paths relocated list(APPEND _RPM_RELOCATION_SCRIPT_${SYMLINK_INDEX}_${POINT_INDEX} "${PAIR_NO}") list(APPEND RELOCATION_VARS "_RPM_RELOCATION_SCRIPT_${SYMLINK_INDEX}_${POINT_INDEX}") # point path relocated list(APPEND _RPM_RELOCATION_SCRIPT_X_${POINT_INDEX} "${PAIR_NO}") list(APPEND RELOCATION_VARS "_RPM_RELOCATION_SCRIPT_X_${POINT_INDEX}") endforeach() endforeach() elseif(POINT_PATHS_COUNT) foreach(POINT_RELOC_PATH IN LISTS POINT_RELOCATION_PATHS) list(FIND PACKAGE_PREFIXES "${POINT_RELOC_PATH}" POINT_INDEX) # point path relocated list(APPEND _RPM_RELOCATION_SCRIPT_X_${POINT_INDEX} "${PAIR_NO}") list(APPEND RELOCATION_VARS "_RPM_RELOCATION_SCRIPT_X_${POINT_INDEX}") endforeach() endif() # no path relocated list(APPEND _RPM_RELOCATION_SCRIPT_X_X "${PAIR_NO}") list(APPEND RELOCATION_VARS "_RPM_RELOCATION_SCRIPT_X_X") # place variables into parent scope foreach(VAR IN LISTS RELOCATION_VARS) set(${VAR} "${${VAR}}" PARENT_SCOPE) endforeach() set(_RPM_RELOCATION_SCRIPT_PAIRS "${_RPM_RELOCATION_SCRIPT_PAIRS}" PARENT_SCOPE) set(REQUIRES_SYMLINK_RELOCATION_SCRIPT "true" PARENT_SCOPE) set(DIRECTIVE "%ghost " PARENT_SCOPE) endfunction() function(cpack_rpm_prepare_install_files INSTALL_FILES_LIST WDIR PACKAGE_PREFIXES IS_RELOCATABLE) # Prepend directories in ${CPACK_RPM_INSTALL_FILES} with %dir # This is necessary to avoid duplicate files since rpmbuild does # recursion on its own when encountering a pathname which is a directory # which is not flagged as %dir string(STRIP "${INSTALL_FILES_LIST}" INSTALL_FILES_LIST) string(REPLACE "\n" ";" INSTALL_FILES_LIST "${INSTALL_FILES_LIST}") string(REPLACE "\"" "" INSTALL_FILES_LIST "${INSTALL_FILES_LIST}") string(LENGTH "${WDIR}" WDR_LEN_) list(SORT INSTALL_FILES_LIST) # make file order consistent on all platforms foreach(F IN LISTS INSTALL_FILES_LIST) unset(DIRECTIVE) if(IS_SYMLINK "${WDIR}/${F}") if(IS_RELOCATABLE) # check that symlink has relocatable format get_filename_component(SYMLINK_LOCATION_ "${WDIR}/${F}" DIRECTORY) execute_process(COMMAND ls -la "${WDIR}/${F}" WORKING_DIRECTORY "${WDIR}" OUTPUT_VARIABLE SYMLINK_POINT_ OUTPUT_STRIP_TRAILING_WHITESPACE) string(FIND "${SYMLINK_POINT_}" "->" SYMLINK_POINT_INDEX_ REVERSE) math(EXPR SYMLINK_POINT_INDEX_ ${SYMLINK_POINT_INDEX_}+3) string(LENGTH "${SYMLINK_POINT_}" SYMLINK_POINT_LENGTH_) # get destination path string(SUBSTRING "${SYMLINK_POINT_}" ${SYMLINK_POINT_INDEX_} ${SYMLINK_POINT_LENGTH_} SYMLINK_POINT_) # check if path is relative or absolute string(SUBSTRING "${SYMLINK_POINT_}" 0 1 SYMLINK_IS_ABSOLUTE_) if(${SYMLINK_IS_ABSOLUTE_} STREQUAL "/") # prevent absolute paths from having /../ or /./ section inside of them get_filename_component(SYMLINK_POINT_ "${SYMLINK_POINT_}" ABSOLUTE) else() # handle relative path get_filename_component(SYMLINK_POINT_ "${SYMLINK_LOCATION_}/${SYMLINK_POINT_}" ABSOLUTE) endif() # recalculate path length after conversion to canonical form string(LENGTH "${SYMLINK_POINT_}" SYMLINK_POINT_LENGTH_) if(SYMLINK_POINT_ MATCHES "${WDIR}/.*") # only symlinks that are pointing inside the packaging structure should be checked for relocation string(SUBSTRING "${SYMLINK_POINT_}" ${WDR_LEN_} -1 SYMLINK_POINT_WD_) cpack_rpm_symlink_get_relocation_prefixes("${F}" "${PACKAGE_PREFIXES}" "SYMLINK_RELOCATIONS") cpack_rpm_symlink_get_relocation_prefixes("${SYMLINK_POINT_WD_}" "${PACKAGE_PREFIXES}" "POINT_RELOCATIONS") list(LENGTH SYMLINK_RELOCATIONS SYMLINK_RELOCATIONS_COUNT) list(LENGTH POINT_RELOCATIONS POINT_RELOCATIONS_COUNT) else() # location pointed to is ouside WDR so it should be treated as a permanent symlink set(SYMLINK_POINT_WD_ "${SYMLINK_POINT_}") unset(SYMLINK_RELOCATIONS) unset(POINT_RELOCATIONS) unset(SYMLINK_RELOCATIONS_COUNT) unset(POINT_RELOCATIONS_COUNT) message(AUTHOR_WARNING "CPackRPM:Warning: Symbolic link '${F}' points to location that is outside packaging path! Link will possibly not be relocatable.") endif() if(SYMLINK_RELOCATIONS_COUNT AND POINT_RELOCATIONS_COUNT) # find matching foreach(SYMLINK_RELOCATION_PREFIX IN LISTS SYMLINK_RELOCATIONS) list(FIND POINT_RELOCATIONS "${SYMLINK_RELOCATION_PREFIX}" FOUND_INDEX) if(NOT ${FOUND_INDEX} EQUAL -1) break() endif() endforeach() if(NOT ${FOUND_INDEX} EQUAL -1) # symlinks have the same subpath if(${SYMLINK_RELOCATIONS_COUNT} EQUAL 1 AND ${POINT_RELOCATIONS_COUNT} EQUAL 1) # permanent symlink get_filename_component(SYMLINK_LOCATION_ "${F}" DIRECTORY) file(RELATIVE_PATH FINAL_PATH_ ${SYMLINK_LOCATION_} ${SYMLINK_POINT_WD_}) execute_process(COMMAND "${CMAKE_COMMAND}" -E create_symlink "${FINAL_PATH_}" "${WDIR}/${F}") else() # relocation subpaths cpack_rpm_symlink_add_for_relocation_script("${PACKAGE_PREFIXES}" "${F}" "${SYMLINK_RELOCATIONS}" "${SYMLINK_POINT_WD_}" "${POINT_RELOCATIONS}") endif() else() # not on the same relocation path cpack_rpm_symlink_add_for_relocation_script("${PACKAGE_PREFIXES}" "${F}" "${SYMLINK_RELOCATIONS}" "${SYMLINK_POINT_WD_}" "${POINT_RELOCATIONS}") endif() elseif(POINT_RELOCATIONS_COUNT) # point is relocatable cpack_rpm_symlink_add_for_relocation_script("${PACKAGE_PREFIXES}" "${F}" "${SYMLINK_RELOCATIONS}" "${SYMLINK_POINT_WD_}" "${POINT_RELOCATIONS}") else() # is not relocatable or points to non relocatable path - permanent symlink execute_process(COMMAND "${CMAKE_COMMAND}" -E create_symlink "${SYMLINK_POINT_WD_}" "${WDIR}/${F}") endif() endif() elseif(IS_DIRECTORY "${WDIR}/${F}") set(DIRECTIVE "%dir ") endif() string(APPEND INSTALL_FILES "${DIRECTIVE}\"${F}\"\n") endforeach() if(REQUIRES_SYMLINK_RELOCATION_SCRIPT) cpack_rpm_symlink_create_relocation_script("${PACKAGE_PREFIXES}") endif() set(RPM_SYMLINK_POSTINSTALL "${RPM_SYMLINK_POSTINSTALL}" PARENT_SCOPE) set(CPACK_RPM_INSTALL_FILES "${INSTALL_FILES}" PARENT_SCOPE) endfunction() if(CMAKE_BINARY_DIR) message(FATAL_ERROR "CPackRPM.cmake may only be used by CPack internally.") endif() if(NOT UNIX) message(FATAL_ERROR "CPackRPM.cmake may only be used under UNIX.") endif() # We need to check if the binaries were compiled with debug symbols # because without them the package will be useless function(cpack_rpm_debugsymbol_check INSTALL_FILES WORKING_DIR) if(NOT CPACK_BUILD_SOURCE_DIRS) message(FATAL_ERROR "CPackRPM: CPACK_BUILD_SOURCE_DIRS variable is not set!" " Required for debuginfo packaging. See documentation of" " CPACK_RPM_DEBUGINFO_PACKAGE variable for details.") endif() # With objdump we should check the debug symbols find_program(OBJDUMP_EXECUTABLE objdump) if(NOT OBJDUMP_EXECUTABLE) message(FATAL_ERROR "CPackRPM: objdump binary could not be found!" " Required for debuginfo packaging. See documentation of" " CPACK_RPM_DEBUGINFO_PACKAGE variable for details.") endif() # With debugedit we prepare source files list find_program(DEBUGEDIT_EXECUTABLE debugedit "/usr/lib/rpm/") if(NOT DEBUGEDIT_EXECUTABLE) message(FATAL_ERROR "CPackRPM: debugedit binary could not be found!" " Required for debuginfo packaging. See documentation of" " CPACK_RPM_DEBUGINFO_PACKAGE variable for details.") endif() unset(mkdir_list_) unset(cp_list_) unset(additional_sources_) foreach(F IN LISTS INSTALL_FILES) if(IS_DIRECTORY "${WORKING_DIR}/${F}" OR IS_SYMLINK "${WORKING_DIR}/${F}") continue() endif() execute_process(COMMAND "${OBJDUMP_EXECUTABLE}" -h ${WORKING_DIR}/${F} WORKING_DIRECTORY "${CPACK_TOPLEVEL_DIRECTORY}" RESULT_VARIABLE OBJDUMP_EXEC_RESULT OUTPUT_VARIABLE OBJDUMP_OUT) # Check that if the given file was executable or not if(NOT OBJDUMP_EXEC_RESULT) string(FIND "${OBJDUMP_OUT}" "debug" FIND_RESULT) if(FIND_RESULT GREATER -1) set(index_ 0) foreach(source_dir_ IN LISTS CPACK_BUILD_SOURCE_DIRS) string(LENGTH "${source_dir_}" source_dir_len_) string(LENGTH "${CPACK_RPM_BUILD_SOURCE_DIRS_PREFIX}/src_${index_}" debuginfo_dir_len) if(source_dir_len_ LESS debuginfo_dir_len) message(FATAL_ERROR "CPackRPM: source dir path '${source_dir_}' is" " longer than debuginfo sources dir path '${CPACK_RPM_BUILD_SOURCE_DIRS_PREFIX}/src_${index_}'!" " Source dir path must be shorter than debuginfo sources dir path." " Set CPACK_RPM_BUILD_SOURCE_DIRS_PREFIX variable to a shorter value" " or make source dir path longer." " Required for debuginfo packaging. See documentation of" " CPACK_RPM_DEBUGINFO_PACKAGE variable for details.") endif() file(REMOVE "${CPACK_RPM_DIRECTORY}/${CPACK_PACKAGE_FILE_NAME}${CPACK_RPM_PACKAGE_COMPONENT_PART_PATH}/debugsources_add.list") execute_process(COMMAND "${DEBUGEDIT_EXECUTABLE}" -b "${source_dir_}" -d "${CPACK_RPM_BUILD_SOURCE_DIRS_PREFIX}/src_${index_}" -i -l "${CPACK_RPM_DIRECTORY}/${CPACK_PACKAGE_FILE_NAME}${CPACK_RPM_PACKAGE_COMPONENT_PART_PATH}/debugsources_add.list" "${WORKING_DIR}/${F}" RESULT_VARIABLE res_ OUTPUT_VARIABLE opt_ ERROR_VARIABLE err_ ) file(STRINGS "${CPACK_RPM_DIRECTORY}/${CPACK_PACKAGE_FILE_NAME}${CPACK_RPM_PACKAGE_COMPONENT_PART_PATH}/debugsources_add.list" sources_) list(REMOVE_DUPLICATES sources_) foreach(source_ IN LISTS sources_) if(EXISTS "${source_dir_}/${source_}" AND NOT IS_DIRECTORY "${source_dir_}/${source_}") get_filename_component(path_part_ "${source_}" DIRECTORY) list(APPEND mkdir_list_ "%{buildroot}${CPACK_RPM_BUILD_SOURCE_DIRS_PREFIX}/src_${index_}/${path_part_}") list(APPEND cp_list_ "cp \"${source_dir_}/${source_}\" \"%{buildroot}${CPACK_RPM_BUILD_SOURCE_DIRS_PREFIX}/src_${index_}/${path_part_}\"") list(APPEND additional_sources_ "${CPACK_RPM_BUILD_SOURCE_DIRS_PREFIX}/src_${index_}/${source_}") endif() endforeach() math(EXPR index_ "${index_} + 1") endforeach() else() message(WARNING "CPackRPM: File: ${F} does not contain debug symbols. They will possibly be missing from debuginfo package!") endif() endif() endforeach() list(REMOVE_DUPLICATES mkdir_list_) unset(TMP_RPM_DEBUGINFO_INSTALL) foreach(part_ IN LISTS mkdir_list_) string(APPEND TMP_RPM_DEBUGINFO_INSTALL "mkdir -p \"${part_}\"\n") endforeach() list(REMOVE_DUPLICATES cp_list_) foreach(part_ IN LISTS cp_list_) string(APPEND TMP_RPM_DEBUGINFO_INSTALL "${part_}\n") endforeach() if(NOT DEFINED CPACK_RPM_DEBUGINFO_EXCLUDE_DIRS) set(CPACK_RPM_DEBUGINFO_EXCLUDE_DIRS /usr /usr/src /usr/src/debug) if(CPACK_RPM_DEBUGINFO_EXCLUDE_DIRS_ADDITION) if(CPACK_RPM_PACKAGE_DEBUG) message("CPackRPM:Debug: Adding ${CPACK_RPM_DEBUGINFO_EXCLUDE_DIRS_ADDITION} to builtin omit list.") endif() list(APPEND CPACK_RPM_DEBUGINFO_EXCLUDE_DIRS "${CPACK_RPM_DEBUGINFO_EXCLUDE_DIRS_ADDITION}") endif() endif() if(CPACK_RPM_PACKAGE_DEBUG) message("CPackRPM:Debug: CPACK_RPM_DEBUGINFO_EXCLUDE_DIRS= ${CPACK_RPM_DEBUGINFO_EXCLUDE_DIRS}") endif() list(REMOVE_DUPLICATES additional_sources_) unset(additional_sources_all_) foreach(source_ IN LISTS additional_sources_) string(REPLACE "/" ";" split_source_ " ${source_}") list(REMOVE_AT split_source_ 0) unset(tmp_path_) # Now generate all segments of the path foreach(segment_ IN LISTS split_source_) string(APPEND tmp_path_ "/${segment_}") list(APPEND additional_sources_all_ "${tmp_path_}") endforeach() endforeach() list(REMOVE_DUPLICATES additional_sources_all_) list(REMOVE_ITEM additional_sources_all_ ${CPACK_RPM_DEBUGINFO_EXCLUDE_DIRS}) unset(TMP_DEBUGINFO_ADDITIONAL_SOURCES) foreach(source_ IN LISTS additional_sources_all_) string(APPEND TMP_DEBUGINFO_ADDITIONAL_SOURCES "${source_}\n") endforeach() set(TMP_RPM_DEBUGINFO_INSTALL "${TMP_RPM_DEBUGINFO_INSTALL}" PARENT_SCOPE) set(TMP_DEBUGINFO_ADDITIONAL_SOURCES "${TMP_DEBUGINFO_ADDITIONAL_SOURCES}" PARENT_SCOPE) endfunction() function(cpack_rpm_variable_fallback OUTPUT_VAR_NAME) set(FALLBACK_VAR_NAMES ${ARGN}) foreach(variable_name IN LISTS FALLBACK_VAR_NAMES) if(${variable_name}) set(${OUTPUT_VAR_NAME} "${${variable_name}}" PARENT_SCOPE) break() endif() endforeach() endfunction() function(cpack_rpm_generate_package) # rpmbuild is the basic command for building RPM package # it may be a simple (symbolic) link to rpm command. find_program(RPMBUILD_EXECUTABLE rpmbuild) # Check version of the rpmbuild tool this would be easier to # track bugs with users and CPackRPM debug mode. # We may use RPM version in order to check for available version dependent features if(RPMBUILD_EXECUTABLE) execute_process(COMMAND ${RPMBUILD_EXECUTABLE} --version OUTPUT_VARIABLE _TMP_VERSION ERROR_QUIET OUTPUT_STRIP_TRAILING_WHITESPACE) string(REGEX REPLACE "^.* " "" RPMBUILD_EXECUTABLE_VERSION ${_TMP_VERSION}) if(CPACK_RPM_PACKAGE_DEBUG) message("CPackRPM:Debug: rpmbuild version is <${RPMBUILD_EXECUTABLE_VERSION}>") endif() endif() if(NOT RPMBUILD_EXECUTABLE) message(FATAL_ERROR "RPM package requires rpmbuild executable") endif() # Display lsb_release output if DEBUG mode enable # This will help to diagnose problem with CPackRPM # because we will know on which kind of Linux we are if(CPACK_RPM_PACKAGE_DEBUG) find_program(LSB_RELEASE_EXECUTABLE lsb_release) if(LSB_RELEASE_EXECUTABLE) execute_process(COMMAND ${LSB_RELEASE_EXECUTABLE} -a OUTPUT_VARIABLE _TMP_LSB_RELEASE_OUTPUT ERROR_QUIET OUTPUT_STRIP_TRAILING_WHITESPACE) string(REGEX REPLACE "\n" ", " LSB_RELEASE_OUTPUT ${_TMP_LSB_RELEASE_OUTPUT}) else () set(LSB_RELEASE_OUTPUT "lsb_release not installed/found!") endif() message("CPackRPM:Debug: LSB_RELEASE = ${LSB_RELEASE_OUTPUT}") endif() # We may use RPM version in the future in order # to shut down warning about space in buildtree # some recent RPM version should support space in different places. # not checked [yet]. if(CPACK_TOPLEVEL_DIRECTORY MATCHES ".* .*") message(FATAL_ERROR "${RPMBUILD_EXECUTABLE} can't handle paths with spaces, use a build directory without spaces for building RPMs.") endif() # If rpmbuild is found # we try to discover alien since we may be on non RPM distro like Debian. # In this case we may try to to use more advanced features # like generating RPM directly from DEB using alien. # FIXME feature not finished (yet) find_program(ALIEN_EXECUTABLE alien) if(ALIEN_EXECUTABLE) message(STATUS "alien found, we may be on a Debian based distro.") endif() # Are we packaging components ? if(CPACK_RPM_PACKAGE_COMPONENT) string(TOUPPER ${CPACK_RPM_PACKAGE_COMPONENT} CPACK_RPM_PACKAGE_COMPONENT_UPPER) endif() set(WDIR "${CPACK_TOPLEVEL_DIRECTORY}/${CPACK_PACKAGE_FILE_NAME}${CPACK_RPM_PACKAGE_COMPONENT_PART_PATH}") # # Use user-defined RPM specific variables value # or generate reasonable default value from # CPACK_xxx generic values. # The variables comes from the needed (mandatory or not) # values found in the RPM specification file aka ".spec" file. # The variables which may/should be defined are: # # CPACK_RPM_PACKAGE_SUMMARY (mandatory) if(CPACK_RPM_PACKAGE_COMPONENT) cpack_rpm_variable_fallback("CPACK_RPM_PACKAGE_SUMMARY" "CPACK_RPM_${CPACK_RPM_PACKAGE_COMPONENT}_PACKAGE_SUMMARY" "CPACK_RPM_${CPACK_RPM_PACKAGE_COMPONENT_UPPER}_PACKAGE_SUMMARY") endif() if(NOT CPACK_RPM_PACKAGE_SUMMARY) if(CPACK_PACKAGE_DESCRIPTION_SUMMARY) set(CPACK_RPM_PACKAGE_SUMMARY ${CPACK_PACKAGE_DESCRIPTION_SUMMARY}) else() # if neither var is defined lets use the name as summary string(TOLOWER "${CPACK_PACKAGE_NAME}" CPACK_RPM_PACKAGE_SUMMARY) endif() endif() # CPACK_RPM_PACKAGE_NAME (mandatory) if(NOT CPACK_RPM_PACKAGE_NAME) string(TOLOWER "${CPACK_PACKAGE_NAME}" CPACK_RPM_PACKAGE_NAME) endif() if(CPACK_RPM_PACKAGE_COMPONENT) string(APPEND CPACK_RPM_PACKAGE_NAME "-${CPACK_RPM_PACKAGE_COMPONENT}") cpack_rpm_variable_fallback("CPACK_RPM_PACKAGE_NAME" "CPACK_RPM_${CPACK_RPM_PACKAGE_COMPONENT}_PACKAGE_NAME" "CPACK_RPM_${CPACK_RPM_PACKAGE_COMPONENT_UPPER}_PACKAGE_NAME") endif() # CPACK_RPM_PACKAGE_VERSION (mandatory) if(NOT CPACK_RPM_PACKAGE_VERSION) if(NOT CPACK_PACKAGE_VERSION) message(FATAL_ERROR "RPM package requires a package version") endif() set(CPACK_RPM_PACKAGE_VERSION ${CPACK_PACKAGE_VERSION}) endif() # Replace '-' in version with '_' # '-' character is an Illegal RPM version character # it is illegal because it is used to separate # RPM "Version" from RPM "Release" string(REPLACE "-" "_" CPACK_RPM_PACKAGE_VERSION ${CPACK_RPM_PACKAGE_VERSION}) # CPACK_RPM_PACKAGE_ARCHITECTURE (mandatory) if(NOT CPACK_RPM_PACKAGE_ARCHITECTURE) execute_process(COMMAND uname "-m" OUTPUT_VARIABLE CPACK_RPM_PACKAGE_ARCHITECTURE OUTPUT_STRIP_TRAILING_WHITESPACE) else() if(CPACK_RPM_PACKAGE_DEBUG) message("CPackRPM:Debug: using user-specified build arch = ${CPACK_RPM_PACKAGE_ARCHITECTURE}") endif() endif() if(CPACK_RPM_PACKAGE_COMPONENT) cpack_rpm_variable_fallback("CPACK_RPM_PACKAGE_ARCHITECTURE" "CPACK_RPM_${CPACK_RPM_PACKAGE_COMPONENT}_PACKAGE_ARCHITECTURE" "CPACK_RPM_${CPACK_RPM_PACKAGE_COMPONENT_UPPER}_PACKAGE_ARCHITECTURE") if(CPACK_RPM_PACKAGE_DEBUG) message("CPackRPM:Debug: using component build arch = ${CPACK_RPM_PACKAGE_ARCHITECTURE}") endif() endif() if(${CPACK_RPM_PACKAGE_ARCHITECTURE} STREQUAL "noarch") set(TMP_RPM_BUILDARCH "Buildarch: ${CPACK_RPM_PACKAGE_ARCHITECTURE}") else() set(TMP_RPM_BUILDARCH "") endif() # CPACK_RPM_PACKAGE_RELEASE # The RPM release is the numbering of the RPM package ITSELF # this is the version of the PACKAGING and NOT the version # of the CONTENT of the package. # You may well need to generate a new RPM package release # without changing the version of the packaged software. # This is the case when the packaging is buggy (not) the software :=) # If not set, 1 is a good candidate if(NOT CPACK_RPM_PACKAGE_RELEASE) set(CPACK_RPM_PACKAGE_RELEASE "1") endif() if(CPACK_RPM_PACKAGE_RELEASE_DIST) string(APPEND CPACK_RPM_PACKAGE_RELEASE "%{?dist}") endif() # CPACK_RPM_PACKAGE_LICENSE if(NOT CPACK_RPM_PACKAGE_LICENSE) set(CPACK_RPM_PACKAGE_LICENSE "unknown") endif() # CPACK_RPM_PACKAGE_GROUP if(CPACK_RPM_PACKAGE_COMPONENT) cpack_rpm_variable_fallback("CPACK_RPM_PACKAGE_GROUP" "CPACK_RPM_${CPACK_RPM_PACKAGE_COMPONENT}_PACKAGE_GROUP" "CPACK_RPM_${CPACK_RPM_PACKAGE_COMPONENT_UPPER}_PACKAGE_GROUP") endif() if(NOT CPACK_RPM_PACKAGE_GROUP) set(CPACK_RPM_PACKAGE_GROUP "unknown") endif() # CPACK_RPM_PACKAGE_VENDOR if(NOT CPACK_RPM_PACKAGE_VENDOR) if(CPACK_PACKAGE_VENDOR) set(CPACK_RPM_PACKAGE_VENDOR "${CPACK_PACKAGE_VENDOR}") else() set(CPACK_RPM_PACKAGE_VENDOR "unknown") endif() endif() # CPACK_RPM_PACKAGE_SOURCE # The name of the source tarball in case we generate a source RPM # CPACK_RPM_PACKAGE_DESCRIPTION # The variable content may be either # - explicitly given by the user or # - filled with the content of CPACK_PACKAGE_DESCRIPTION_FILE # if it is defined # - set to a default value # if(CPACK_RPM_PACKAGE_COMPONENT) cpack_rpm_variable_fallback("CPACK_RPM_PACKAGE_DESCRIPTION" "CPACK_RPM_${CPACK_RPM_PACKAGE_COMPONENT}_PACKAGE_DESCRIPTION" "CPACK_RPM_${CPACK_RPM_PACKAGE_COMPONENT_UPPER}_PACKAGE_DESCRIPTION" "CPACK_COMPONENT_${CPACK_RPM_PACKAGE_COMPONENT_UPPER}_DESCRIPTION") endif() if(NOT CPACK_RPM_PACKAGE_DESCRIPTION) if(CPACK_PACKAGE_DESCRIPTION_FILE) file(READ ${CPACK_PACKAGE_DESCRIPTION_FILE} CPACK_RPM_PACKAGE_DESCRIPTION) else () set(CPACK_RPM_PACKAGE_DESCRIPTION "no package description available") endif () endif () # CPACK_RPM_COMPRESSION_TYPE # if (CPACK_RPM_COMPRESSION_TYPE) if(CPACK_RPM_PACKAGE_DEBUG) message("CPackRPM:Debug: User Specified RPM compression type: ${CPACK_RPM_COMPRESSION_TYPE}") endif() if(CPACK_RPM_COMPRESSION_TYPE STREQUAL "lzma") set(CPACK_RPM_COMPRESSION_TYPE_TMP "%define _binary_payload w9.lzdio") endif() if(CPACK_RPM_COMPRESSION_TYPE STREQUAL "xz") set(CPACK_RPM_COMPRESSION_TYPE_TMP "%define _binary_payload w7.xzdio") endif() if(CPACK_RPM_COMPRESSION_TYPE STREQUAL "bzip2") set(CPACK_RPM_COMPRESSION_TYPE_TMP "%define _binary_payload w9.bzdio") endif() if(CPACK_RPM_COMPRESSION_TYPE STREQUAL "gzip") set(CPACK_RPM_COMPRESSION_TYPE_TMP "%define _binary_payload w9.gzdio") endif() else() set(CPACK_RPM_COMPRESSION_TYPE_TMP "") endif() if(NOT CPACK_RPM_PACKAGE_SOURCES) if(CPACK_PACKAGE_RELOCATABLE OR CPACK_RPM_PACKAGE_RELOCATABLE) if(CPACK_RPM_PACKAGE_DEBUG) message("CPackRPM:Debug: Trying to build a relocatable package") endif() if(CPACK_SET_DESTDIR AND (NOT CPACK_SET_DESTDIR STREQUAL "I_ON")) message("CPackRPM:Warning: CPACK_SET_DESTDIR is set (=${CPACK_SET_DESTDIR}) while requesting a relocatable package (CPACK_RPM_PACKAGE_RELOCATABLE is set): this is not supported, the package won't be relocatable.") set(CPACK_RPM_PACKAGE_RELOCATABLE FALSE) else() set(CPACK_RPM_PACKAGE_PREFIX ${CPACK_PACKAGING_INSTALL_PREFIX}) # kept for back compatibility (provided external RPM spec files) cpack_rpm_prepare_relocation_paths() set(CPACK_RPM_PACKAGE_RELOCATABLE TRUE) endif() endif() else() if(CPACK_RPM_PACKAGE_COMPONENT) message(FATAL_ERROR "CPACK_RPM_PACKAGE_SOURCES parameter can not be used" " in combination with CPACK_RPM_PACKAGE_COMPONENT parameter!") endif() set(CPACK_RPM_PACKAGE_RELOCATABLE FALSE) # disable relocatable option if building source RPM endif() # Check if additional fields for RPM spec header are given # There may be some COMPONENT specific variables as well # If component specific var is not provided we use the global one # for each component foreach(_RPM_SPEC_HEADER URL REQUIRES SUGGESTS PROVIDES OBSOLETES PREFIX CONFLICTS AUTOPROV AUTOREQ AUTOREQPROV REQUIRES_PRE REQUIRES_POST REQUIRES_PREUN REQUIRES_POSTUN) if(CPACK_RPM_PACKAGE_DEBUG) message("CPackRPM:Debug: processing ${_RPM_SPEC_HEADER}") endif() if(CPACK_RPM_PACKAGE_COMPONENT) cpack_rpm_variable_fallback("CPACK_RPM_PACKAGE_${_RPM_SPEC_HEADER}" "CPACK_RPM_${CPACK_RPM_PACKAGE_COMPONENT}_PACKAGE_${_RPM_SPEC_HEADER}" "CPACK_RPM_${CPACK_RPM_PACKAGE_COMPONENT_UPPER}_PACKAGE_${_RPM_SPEC_HEADER}") endif() if(DEFINED CPACK_RPM_PACKAGE_${_RPM_SPEC_HEADER}) if(CPACK_RPM_PACKAGE_DEBUG) message("CPackRPM:Debug: using CPACK_RPM_PACKAGE_${_RPM_SPEC_HEADER}") endif() set(CPACK_RPM_PACKAGE_${_RPM_SPEC_HEADER}_TMP ${CPACK_RPM_PACKAGE_${_RPM_SPEC_HEADER}}) endif() # Treat the RPM Spec keyword iff it has been properly defined if(DEFINED CPACK_RPM_PACKAGE_${_RPM_SPEC_HEADER}_TMP) # Transform NAME --> Name e.g. PROVIDES --> Provides # The Upper-case first letter and lowercase tail is the # appropriate value required in the final RPM spec file. string(SUBSTRING ${_RPM_SPEC_HEADER} 1 -1 _PACKAGE_HEADER_TAIL) string(TOLOWER "${_PACKAGE_HEADER_TAIL}" _PACKAGE_HEADER_TAIL) string(SUBSTRING ${_RPM_SPEC_HEADER} 0 1 _PACKAGE_HEADER_NAME) string(APPEND _PACKAGE_HEADER_NAME "${_PACKAGE_HEADER_TAIL}") # The following keywords require parentheses around the "pre" or "post" suffix in the final RPM spec file. set(SCRIPTS_REQUIREMENTS_LIST REQUIRES_PRE REQUIRES_POST REQUIRES_PREUN REQUIRES_POSTUN) list(FIND SCRIPTS_REQUIREMENTS_LIST ${_RPM_SPEC_HEADER} IS_SCRIPTS_REQUIREMENT_FOUND) if(NOT ${IS_SCRIPTS_REQUIREMENT_FOUND} EQUAL -1) string(REPLACE "_" "(" _PACKAGE_HEADER_NAME "${_PACKAGE_HEADER_NAME}") string(APPEND _PACKAGE_HEADER_NAME ")") endif() if(CPACK_RPM_PACKAGE_DEBUG) message("CPackRPM:Debug: User defined ${_PACKAGE_HEADER_NAME}:\n ${CPACK_RPM_PACKAGE_${_RPM_SPEC_HEADER}_TMP}") endif() set(TMP_RPM_${_RPM_SPEC_HEADER} "${_PACKAGE_HEADER_NAME}: ${CPACK_RPM_PACKAGE_${_RPM_SPEC_HEADER}_TMP}") unset(CPACK_RPM_PACKAGE_${_RPM_SPEC_HEADER}_TMP) endif() endforeach() # CPACK_RPM_SPEC_INSTALL_POST # May be used to define a RPM post intallation script # for example setting it to "/bin/true" may prevent # rpmbuild from stripping binaries. if(CPACK_RPM_SPEC_INSTALL_POST) if(CPACK_RPM_PACKAGE_DEBUG) message("CPackRPM:Debug: User defined CPACK_RPM_SPEC_INSTALL_POST = ${CPACK_RPM_SPEC_INSTALL_POST}") endif() set(TMP_RPM_SPEC_INSTALL_POST "%define __spec_install_post ${CPACK_RPM_SPEC_INSTALL_POST}") endif() # CPACK_RPM_POST_INSTALL_SCRIPT_FILE (or CPACK_RPM__POST_INSTALL_SCRIPT_FILE) # CPACK_RPM_POST_UNINSTALL_SCRIPT_FILE (or CPACK_RPM__POST_UNINSTALL_SCRIPT_FILE) # May be used to embed a post (un)installation script in the spec file. # The refered script file(s) will be read and directly # put after the %post or %postun section # ---------------------------------------------------------------- # CPACK_RPM_PRE_INSTALL_SCRIPT_FILE (or CPACK_RPM__PRE_INSTALL_SCRIPT_FILE) # CPACK_RPM_PRE_UNINSTALL_SCRIPT_FILE (or CPACK_RPM__PRE_UNINSTALL_SCRIPT_FILE) # May be used to embed a pre (un)installation script in the spec file. # The refered script file(s) will be read and directly # put after the %pre or %preun section foreach(RPM_SCRIPT_FILE_TYPE_ "INSTALL" "UNINSTALL") foreach(RPM_SCRIPT_FILE_TIME_ "PRE" "POST") set("CPACK_RPM_${RPM_SCRIPT_FILE_TIME_}_${RPM_SCRIPT_FILE_TYPE_}_READ_FILE" "${CPACK_RPM_${RPM_SCRIPT_FILE_TIME_}_${RPM_SCRIPT_FILE_TYPE_}_SCRIPT_FILE}") if(CPACK_RPM_PACKAGE_COMPONENT) cpack_rpm_variable_fallback("CPACK_RPM_${RPM_SCRIPT_FILE_TIME_}_${RPM_SCRIPT_FILE_TYPE_}_READ_FILE" "CPACK_RPM_${CPACK_RPM_PACKAGE_COMPONENT}_${RPM_SCRIPT_FILE_TIME_}_${RPM_SCRIPT_FILE_TYPE_}_SCRIPT_FILE" "CPACK_RPM_${CPACK_RPM_PACKAGE_COMPONENT_UPPER}_${RPM_SCRIPT_FILE_TIME_}_${RPM_SCRIPT_FILE_TYPE_}_SCRIPT_FILE") endif() # Handle file if it has been specified if(CPACK_RPM_${RPM_SCRIPT_FILE_TIME_}_${RPM_SCRIPT_FILE_TYPE_}_READ_FILE) if(EXISTS ${CPACK_RPM_${RPM_SCRIPT_FILE_TIME_}_${RPM_SCRIPT_FILE_TYPE_}_READ_FILE}) file(READ ${CPACK_RPM_${RPM_SCRIPT_FILE_TIME_}_${RPM_SCRIPT_FILE_TYPE_}_READ_FILE} "CPACK_RPM_SPEC_${RPM_SCRIPT_FILE_TIME_}${RPM_SCRIPT_FILE_TYPE_}") else() message("CPackRPM:Warning: CPACK_RPM_${RPM_SCRIPT_FILE_TIME_}_${RPM_SCRIPT_FILE_TYPE_}_SCRIPT_FILE <${CPACK_RPM_${RPM_SCRIPT_FILE_TIME_}_${RPM_SCRIPT_FILE_TYPE_}_READ_FILE}> does not exists - ignoring") endif() else() # reset SPEC var value if no file has been specified # (either globally or component-wise) set("CPACK_RPM_SPEC_${RPM_SCRIPT_FILE_TIME_}${RPM_SCRIPT_FILE_TYPE_}" "") endif() endforeach() endforeach() # CPACK_RPM_CHANGELOG_FILE # May be used to embed a changelog in the spec file. # The refered file will be read and directly put after the %changelog section if(CPACK_RPM_CHANGELOG_FILE) if(EXISTS ${CPACK_RPM_CHANGELOG_FILE}) file(READ ${CPACK_RPM_CHANGELOG_FILE} CPACK_RPM_SPEC_CHANGELOG) else() message(SEND_ERROR "CPackRPM:Warning: CPACK_RPM_CHANGELOG_FILE <${CPACK_RPM_CHANGELOG_FILE}> does not exists - ignoring") endif() else() set(CPACK_RPM_SPEC_CHANGELOG "* Sun Jul 4 2010 Eric Noulard - ${CPACK_RPM_PACKAGE_VERSION}-${CPACK_RPM_PACKAGE_RELEASE}\n Generated by CPack RPM (no Changelog file were provided)") endif() # CPACK_RPM_SPEC_MORE_DEFINE # This is a generated spec rpm file spaceholder if(CPACK_RPM_SPEC_MORE_DEFINE) if(CPACK_RPM_PACKAGE_DEBUG) message("CPackRPM:Debug: User defined more define spec line specified:\n ${CPACK_RPM_SPEC_MORE_DEFINE}") endif() endif() # Now we may create the RPM build tree structure set(CPACK_RPM_ROOTDIR "${CPACK_TOPLEVEL_DIRECTORY}") message(STATUS "CPackRPM:Debug: Using CPACK_RPM_ROOTDIR=${CPACK_RPM_ROOTDIR}") # Prepare RPM build tree file(MAKE_DIRECTORY ${CPACK_RPM_ROOTDIR}) file(MAKE_DIRECTORY ${CPACK_RPM_ROOTDIR}/tmp) file(MAKE_DIRECTORY ${CPACK_RPM_ROOTDIR}/BUILD) file(MAKE_DIRECTORY ${CPACK_RPM_ROOTDIR}/RPMS) file(MAKE_DIRECTORY ${CPACK_RPM_ROOTDIR}/SOURCES) file(MAKE_DIRECTORY ${CPACK_RPM_ROOTDIR}/SPECS) file(MAKE_DIRECTORY ${CPACK_RPM_ROOTDIR}/SRPMS) # it seems rpmbuild can't handle spaces in the path # neither escaping (as below) nor putting quotes around the path seem to help #string(REGEX REPLACE " " "\\\\ " CPACK_RPM_DIRECTORY "${CPACK_TOPLEVEL_DIRECTORY}") set(CPACK_RPM_DIRECTORY "${CPACK_TOPLEVEL_DIRECTORY}") cpack_rpm_prepare_content_list() # In component case, put CPACK_ABSOLUTE_DESTINATION_FILES_ # into CPACK_ABSOLUTE_DESTINATION_FILES_INTERNAL # otherwise, put CPACK_ABSOLUTE_DESTINATION_FILES # This must be done BEFORE the CPACK_ABSOLUTE_DESTINATION_FILES_INTERNAL handling if(CPACK_RPM_PACKAGE_COMPONENT) if(CPACK_ABSOLUTE_DESTINATION_FILES) cpack_rpm_variable_fallback("COMPONENT_FILES_TAG" "CPACK_ABSOLUTE_DESTINATION_FILES_${CPACK_RPM_PACKAGE_COMPONENT}" "CPACK_ABSOLUTE_DESTINATION_FILES_${CPACK_RPM_PACKAGE_COMPONENT_UPPER}") set(CPACK_ABSOLUTE_DESTINATION_FILES_INTERNAL "${${COMPONENT_FILES_TAG}}") if(CPACK_RPM_PACKAGE_DEBUG) message("CPackRPM:Debug: Handling Absolute Destination Files: <${CPACK_ABSOLUTE_DESTINATION_FILES_INTERNAL}>") message("CPackRPM:Debug: in component = ${CPACK_RPM_PACKAGE_COMPONENT}") endif() endif() else() if(CPACK_ABSOLUTE_DESTINATION_FILES) set(CPACK_ABSOLUTE_DESTINATION_FILES_INTERNAL "${CPACK_ABSOLUTE_DESTINATION_FILES}") endif() endif() # In component case, set CPACK_RPM_USER_FILELIST_INTERNAL with CPACK_RPM__USER_FILELIST. set(CPACK_RPM_USER_FILELIST_INTERNAL "") if(CPACK_RPM_PACKAGE_COMPONENT) cpack_rpm_variable_fallback("CPACK_RPM_USER_FILELIST_INTERNAL" "CPACK_RPM_${CPACK_RPM_PACKAGE_COMPONENT}_USER_FILELIST" "CPACK_RPM_${CPACK_RPM_PACKAGE_COMPONENT_UPPER}_USER_FILELIST") if(CPACK_RPM_PACKAGE_DEBUG AND CPACK_RPM_USER_FILELIST_INTERNAL) message("CPackRPM:Debug: Handling User Filelist: <${CPACK_RPM_USER_FILELIST_INTERNAL}>") message("CPackRPM:Debug: in component = ${CPACK_RPM_PACKAGE_COMPONENT}") endif() elseif(CPACK_RPM_USER_FILELIST) set(CPACK_RPM_USER_FILELIST_INTERNAL "${CPACK_RPM_USER_FILELIST}") endif() # Handle user specified file line list in CPACK_RPM_USER_FILELIST_INTERNAL # Remove those files from CPACK_ABSOLUTE_DESTINATION_FILES_INTERNAL # or CPACK_RPM_INSTALL_FILES, # hence it must be done before these auto-generated lists are processed. if(CPACK_RPM_USER_FILELIST_INTERNAL) if(CPACK_RPM_PACKAGE_DEBUG) message("CPackRPM:Debug: Handling User Filelist: <${CPACK_RPM_USER_FILELIST_INTERNAL}>") endif() # Create CMake list from CPACK_RPM_INSTALL_FILES string(STRIP "${CPACK_RPM_INSTALL_FILES}" CPACK_RPM_INSTALL_FILES_LIST) string(REPLACE "\n" ";" CPACK_RPM_INSTALL_FILES_LIST "${CPACK_RPM_INSTALL_FILES_LIST}") string(REPLACE "\"" "" CPACK_RPM_INSTALL_FILES_LIST "${CPACK_RPM_INSTALL_FILES_LIST}") set(CPACK_RPM_USER_INSTALL_FILES "") foreach(F IN LISTS CPACK_RPM_USER_FILELIST_INTERNAL) string(REGEX REPLACE "%[A-Za-z]+(\\([^()]*\\))? " "" F_PATH ${F}) string(REGEX MATCH "%[A-Za-z]+(\\([^()]*\\))?" F_PREFIX ${F}) if(CPACK_RPM_PACKAGE_DEBUG) message("CPackRPM:Debug: F_PREFIX=<${F_PREFIX}>, F_PATH=<${F_PATH}>") endif() if(F_PREFIX) string(APPEND F_PREFIX " ") endif() # Rebuild the user list file string(APPEND CPACK_RPM_USER_INSTALL_FILES "${F_PREFIX}\"${F_PATH}\"\n") # Remove from CPACK_RPM_INSTALL_FILES and CPACK_ABSOLUTE_DESTINATION_FILES_INTERNAL list(REMOVE_ITEM CPACK_RPM_INSTALL_FILES_LIST ${F_PATH}) # ABSOLUTE destination files list may not exists at all if (CPACK_ABSOLUTE_DESTINATION_FILES_INTERNAL) list(REMOVE_ITEM CPACK_ABSOLUTE_DESTINATION_FILES_INTERNAL ${F_PATH}) endif() endforeach() # Rebuild CPACK_RPM_INSTALL_FILES set(CPACK_RPM_INSTALL_FILES "") foreach(F IN LISTS CPACK_RPM_INSTALL_FILES_LIST) string(APPEND CPACK_RPM_INSTALL_FILES "\"${F}\"\n") endforeach() else() set(CPACK_RPM_USER_INSTALL_FILES "") endif() if (CPACK_ABSOLUTE_DESTINATION_FILES_INTERNAL) if(CPACK_RPM_PACKAGE_DEBUG) message("CPackRPM:Debug: Handling Absolute Destination Files: ${CPACK_ABSOLUTE_DESTINATION_FILES_INTERNAL}") endif() # Remove trailing space string(STRIP "${CPACK_RPM_INSTALL_FILES}" CPACK_RPM_INSTALL_FILES_LIST) # Transform endline separated - string into CMake List string(REPLACE "\n" ";" CPACK_RPM_INSTALL_FILES_LIST "${CPACK_RPM_INSTALL_FILES_LIST}") # Remove unecessary quotes string(REPLACE "\"" "" CPACK_RPM_INSTALL_FILES_LIST "${CPACK_RPM_INSTALL_FILES_LIST}") # Remove ABSOLUTE install file from INSTALL FILE LIST list(REMOVE_ITEM CPACK_RPM_INSTALL_FILES_LIST ${CPACK_ABSOLUTE_DESTINATION_FILES_INTERNAL}) # Rebuild INSTALL_FILES set(CPACK_RPM_INSTALL_FILES "") foreach(F IN LISTS CPACK_RPM_INSTALL_FILES_LIST) string(APPEND CPACK_RPM_INSTALL_FILES "\"${F}\"\n") endforeach() # Build ABSOLUTE_INSTALL_FILES set(CPACK_RPM_ABSOLUTE_INSTALL_FILES "") foreach(F IN LISTS CPACK_ABSOLUTE_DESTINATION_FILES_INTERNAL) string(APPEND CPACK_RPM_ABSOLUTE_INSTALL_FILES "%config \"${F}\"\n") endforeach() if(CPACK_RPM_PACKAGE_DEBUG) message("CPackRPM:Debug: CPACK_RPM_ABSOLUTE_INSTALL_FILES=${CPACK_RPM_ABSOLUTE_INSTALL_FILES}") message("CPackRPM:Debug: CPACK_RPM_INSTALL_FILES=${CPACK_RPM_INSTALL_FILES}") endif() else() # reset vars in order to avoid leakage of value(s) from one component to another set(CPACK_RPM_ABSOLUTE_INSTALL_FILES "") endif() cpack_rpm_variable_fallback("CPACK_RPM_DEBUGINFO_PACKAGE" "CPACK_RPM_${CPACK_RPM_PACKAGE_COMPONENT}_DEBUGINFO_PACKAGE" "CPACK_RPM_${CPACK_RPM_PACKAGE_COMPONENT_UPPER}_DEBUGINFO_PACKAGE" "CPACK_RPM_DEBUGINFO_PACKAGE") if(CPACK_RPM_DEBUGINFO_PACKAGE) cpack_rpm_variable_fallback("CPACK_RPM_BUILD_SOURCE_DIRS_PREFIX" "CPACK_RPM_${CPACK_RPM_PACKAGE_COMPONENT}_BUILD_SOURCE_DIRS_PREFIX" "CPACK_RPM_${CPACK_RPM_PACKAGE_COMPONENT_UPPER}_BUILD_SOURCE_DIRS_PREFIX" "CPACK_RPM_BUILD_SOURCE_DIRS_PREFIX") if(NOT CPACK_RPM_BUILD_SOURCE_DIRS_PREFIX) set(CPACK_RPM_BUILD_SOURCE_DIRS_PREFIX "/usr/src/debug/${CPACK_PACKAGE_FILE_NAME}${CPACK_RPM_PACKAGE_COMPONENT_PART_PATH}") endif() cpack_rpm_debugsymbol_check("${CPACK_RPM_INSTALL_FILES}" "${WDIR}") set(TMP_RPM_DEBUGINFO " # Modified version of %%debug_package macro # defined in /usr/lib/rpm/macros as that one # can't handle injection of extra source files. %ifnarch noarch %global __debug_package 1 %package debuginfo Summary: Debug information for package %{name} Group: Development/Debug AutoReqProv: 0 %description debuginfo This package provides debug information for package %{name}. Debug information is useful when developing applications that use this package or when debugging this package. %files debuginfo -f debugfiles.list %defattr(-,root,root) ${TMP_DEBUGINFO_ADDITIONAL_SOURCES} %endif ") endif() # Prepare install files cpack_rpm_prepare_install_files( "${CPACK_RPM_INSTALL_FILES}" "${WDIR}" "${RPM_USED_PACKAGE_PREFIXES}" "${CPACK_RPM_PACKAGE_RELOCATABLE}" ) # set default user and group foreach(_PERM_TYPE "USER" "GROUP") if(CPACK_RPM_${CPACK_RPM_PACKAGE_COMPONENT_UPPER}_DEFAULT_${_PERM_TYPE}) set(TMP_DEFAULT_${_PERM_TYPE} "${CPACK_RPM_${CPACK_RPM_PACKAGE_COMPONENT_UPPER}_DEFAULT_${_PERM_TYPE}}") elseif(CPACK_RPM_DEFAULT_${_PERM_TYPE}) set(TMP_DEFAULT_${_PERM_TYPE} "${CPACK_RPM_DEFAULT_${_PERM_TYPE}}") else() set(TMP_DEFAULT_${_PERM_TYPE} "root") endif() endforeach() # set default file and dir permissions foreach(_PERM_TYPE "FILE" "DIR") if(CPACK_RPM_${CPACK_RPM_PACKAGE_COMPONENT_UPPER}_DEFAULT_${_PERM_TYPE}_PERMISSIONS) get_unix_permissions_octal_notation("CPACK_RPM_${CPACK_RPM_PACKAGE_COMPONENT_UPPER}_DEFAULT_${_PERM_TYPE}_PERMISSIONS" "TMP_DEFAULT_${_PERM_TYPE}_PERMISSIONS") set(_PERMISSIONS_VAR "CPACK_RPM_${CPACK_RPM_PACKAGE_COMPONENT_UPPER}_DEFAULT_${_PERM_TYPE}_PERMISSIONS") elseif(CPACK_RPM_DEFAULT_${_PERM_TYPE}_PERMISSIONS) get_unix_permissions_octal_notation("CPACK_RPM_DEFAULT_${_PERM_TYPE}_PERMISSIONS" "TMP_DEFAULT_${_PERM_TYPE}_PERMISSIONS") set(_PERMISSIONS_VAR "CPACK_RPM_DEFAULT_${_PERM_TYPE}_PERMISSIONS") else() set(TMP_DEFAULT_${_PERM_TYPE}_PERMISSIONS "-") endif() endforeach() # The name of the final spec file to be used by rpmbuild set(CPACK_RPM_BINARY_SPECFILE "${CPACK_RPM_ROOTDIR}/SPECS/${CPACK_RPM_PACKAGE_NAME}.spec") # Print out some debug information if we were asked for that if(CPACK_RPM_PACKAGE_DEBUG) message("CPackRPM:Debug: CPACK_TOPLEVEL_DIRECTORY = ${CPACK_TOPLEVEL_DIRECTORY}") message("CPackRPM:Debug: CPACK_TOPLEVEL_TAG = ${CPACK_TOPLEVEL_TAG}") message("CPackRPM:Debug: CPACK_TEMPORARY_DIRECTORY = ${CPACK_TEMPORARY_DIRECTORY}") message("CPackRPM:Debug: CPACK_OUTPUT_FILE_NAME = ${CPACK_OUTPUT_FILE_NAME}") message("CPackRPM:Debug: CPACK_OUTPUT_FILE_PATH = ${CPACK_OUTPUT_FILE_PATH}") message("CPackRPM:Debug: CPACK_PACKAGE_FILE_NAME = ${CPACK_PACKAGE_FILE_NAME}") message("CPackRPM:Debug: CPACK_RPM_BINARY_SPECFILE = ${CPACK_RPM_BINARY_SPECFILE}") message("CPackRPM:Debug: CPACK_PACKAGE_INSTALL_DIRECTORY = ${CPACK_PACKAGE_INSTALL_DIRECTORY}") message("CPackRPM:Debug: CPACK_TEMPORARY_PACKAGE_FILE_NAME = ${CPACK_TEMPORARY_PACKAGE_FILE_NAME}") endif() # # USER generated/provided spec file handling. # # We can have a component specific spec file. if(CPACK_RPM_PACKAGE_COMPONENT) cpack_rpm_variable_fallback("CPACK_RPM_USER_BINARY_SPECFILE" "CPACK_RPM_${CPACK_RPM_PACKAGE_COMPONENT}_USER_BINARY_SPECFILE" "CPACK_RPM_${CPACK_RPM_PACKAGE_COMPONENT_UPPER}_USER_BINARY_SPECFILE") endif() cpack_rpm_variable_fallback("CPACK_RPM_FILE_NAME" "CPACK_RPM_${CPACK_RPM_PACKAGE_COMPONENT}_FILE_NAME" "CPACK_RPM_${CPACK_RPM_PACKAGE_COMPONENT_UPPER}_FILE_NAME" "CPACK_RPM_FILE_NAME") if(NOT CPACK_RPM_FILE_NAME STREQUAL "RPM-DEFAULT") if(CPACK_RPM_FILE_NAME) cmake_policy(PUSH) cmake_policy(SET CMP0010 NEW) if(NOT CPACK_RPM_FILE_NAME MATCHES ".*\\.rpm") cmake_policy(POP) message(FATAL_ERROR "'${CPACK_RPM_FILE_NAME}' is not a valid RPM package file name as it must end with '.rpm'!") endif() cmake_policy(POP) else() # old file name format for back compatibility set(CPACK_RPM_FILE_NAME "${CPACK_OUTPUT_FILE_NAME}") endif() # else example: #set(CPACK_RPM_FILE_NAME "${CPACK_RPM_PACKAGE_NAME}-${CPACK_RPM_PACKAGE_VERSION}-${CPACK_RPM_PACKAGE_RELEASE}-${CPACK_RPM_PACKAGE_ARCHITECTURE}.rpm") if(NOT CPACK_RPM_DEBUGINFO_PACKAGE) set(FILE_NAME_DEFINE "%define _rpmfilename ${CPACK_RPM_FILE_NAME}") endif() endif() if(CPACK_RPM_PACKAGE_SOURCES) # source rpm set(archive_name_ "${CPACK_RPM_PACKAGE_NAME}-${CPACK_RPM_PACKAGE_VERSION}") execute_process( COMMAND ${CMAKE_COMMAND} -E tar "cfvz" "${CPACK_RPM_DIRECTORY}/SOURCES/${archive_name_}.tar.gz" "${CPACK_PACKAGE_FILE_NAME}" WORKING_DIRECTORY ${CPACK_RPM_DIRECTORY} ) set(TMP_RPM_SOURCE "Source: ${archive_name_}.tar.gz") if(CPACK_RPM_BUILDREQUIRES) set(TMP_RPM_BUILD_REQUIRES "BuildRequires: ${CPACK_RPM_BUILDREQUIRES}") endif() # Disable debuginfo packages - srpm generates invalid packages due to # releasing controll to cpack to generate binary packages. # Note however that this doesn't prevent cpack to generate debuginfo # packages when run from srpm with --rebuild. set(TMP_RPM_DISABLE_DEBUGINFO "%define debug_package %{nil}") if(NOT CPACK_RPM_SOURCE_PKG_PACKAGING_INSTALL_PREFIX) set(CPACK_RPM_SOURCE_PKG_PACKAGING_INSTALL_PREFIX "/") endif() set(TMP_RPM_BUILD " %build mkdir cpack_rpm_build_dir cd cpack_rpm_build_dir cmake ${CPACK_RPM_SOURCE_PKG_BUILD_PARAMS} -DCPACK_PACKAGING_INSTALL_PREFIX=${CPACK_RPM_SOURCE_PKG_PACKAGING_INSTALL_PREFIX} ../${CPACK_PACKAGE_FILE_NAME} make %{?_smp_mflags}" # %{?_smp_mflags} -> -j option ) set(TMP_RPM_INSTALL " cd cpack_rpm_build_dir cpack -G RPM mv *.rpm %_rpmdir" ) set(TMP_RPM_PREP "%setup -c") set(RPMBUILD_FLAGS "-bs") file(WRITE ${CPACK_RPM_BINARY_SPECFILE}.in "# -*- rpm-spec -*- BuildRoot: %_topdir/\@CPACK_PACKAGE_FILE_NAME\@ Summary: \@CPACK_RPM_PACKAGE_SUMMARY\@ Name: \@CPACK_RPM_PACKAGE_NAME\@ Version: \@CPACK_RPM_PACKAGE_VERSION\@ Release: \@CPACK_RPM_PACKAGE_RELEASE\@ License: \@CPACK_RPM_PACKAGE_LICENSE\@ Group: \@CPACK_RPM_PACKAGE_GROUP\@ Vendor: \@CPACK_RPM_PACKAGE_VENDOR\@ \@TMP_RPM_SOURCE\@ \@TMP_RPM_BUILD_REQUIRES\@ \@TMP_RPM_BUILDARCH\@ \@TMP_RPM_PREFIXES\@ \@TMP_RPM_DISABLE_DEBUGINFO\@ %define _rpmdir %_topdir/RPMS %define _srcrpmdir %_topdir/SRPMS \@FILE_NAME_DEFINE\@ %define _unpackaged_files_terminate_build 0 \@TMP_RPM_SPEC_INSTALL_POST\@ \@CPACK_RPM_SPEC_MORE_DEFINE\@ \@CPACK_RPM_COMPRESSION_TYPE_TMP\@ %description \@CPACK_RPM_PACKAGE_DESCRIPTION\@ # This is a shortcutted spec file generated by CMake RPM generator # we skip _install step because CPack does that for us. # We do only save CPack installed tree in _prepr # and then restore it in build. %prep \@TMP_RPM_PREP\@ \@TMP_RPM_BUILD\@ #p build %install \@TMP_RPM_INSTALL\@ %clean %changelog \@CPACK_RPM_SPEC_CHANGELOG\@ " ) else() # binary rpm # We should generate a USER spec file template: # - either because the user asked for it : CPACK_RPM_GENERATE_USER_BINARY_SPECFILE_TEMPLATE # - or the user did not provide one : NOT CPACK_RPM_USER_BINARY_SPECFILE if(CPACK_RPM_GENERATE_USER_BINARY_SPECFILE_TEMPLATE OR NOT CPACK_RPM_USER_BINARY_SPECFILE) set(RPMBUILD_FLAGS "-bb") file(WRITE ${CPACK_RPM_BINARY_SPECFILE}.in "# -*- rpm-spec -*- BuildRoot: %_topdir/\@CPACK_PACKAGE_FILE_NAME\@\@CPACK_RPM_PACKAGE_COMPONENT_PART_PATH\@ Summary: \@CPACK_RPM_PACKAGE_SUMMARY\@ Name: \@CPACK_RPM_PACKAGE_NAME\@ Version: \@CPACK_RPM_PACKAGE_VERSION\@ Release: \@CPACK_RPM_PACKAGE_RELEASE\@ License: \@CPACK_RPM_PACKAGE_LICENSE\@ Group: \@CPACK_RPM_PACKAGE_GROUP\@ Vendor: \@CPACK_RPM_PACKAGE_VENDOR\@ \@TMP_RPM_URL\@ \@TMP_RPM_REQUIRES\@ \@TMP_RPM_REQUIRES_PRE\@ \@TMP_RPM_REQUIRES_POST\@ \@TMP_RPM_REQUIRES_PREUN\@ \@TMP_RPM_REQUIRES_POSTUN\@ \@TMP_RPM_PROVIDES\@ \@TMP_RPM_OBSOLETES\@ \@TMP_RPM_CONFLICTS\@ \@TMP_RPM_AUTOPROV\@ \@TMP_RPM_AUTOREQ\@ \@TMP_RPM_AUTOREQPROV\@ \@TMP_RPM_BUILDARCH\@ \@TMP_RPM_PREFIXES\@ \@TMP_RPM_DEBUGINFO\@ %define _rpmdir %_topdir/RPMS %define _srcrpmdir %_topdir/SRPMS \@FILE_NAME_DEFINE\@ %define _unpackaged_files_terminate_build 0 \@TMP_RPM_SPEC_INSTALL_POST\@ \@CPACK_RPM_SPEC_MORE_DEFINE\@ \@CPACK_RPM_COMPRESSION_TYPE_TMP\@ %description \@CPACK_RPM_PACKAGE_DESCRIPTION\@ # This is a shortcutted spec file generated by CMake RPM generator # we skip _install step because CPack does that for us. # We do only save CPack installed tree in _prepr # and then restore it in build. %prep mv $RPM_BUILD_ROOT %_topdir/tmpBBroot %install if [ -e $RPM_BUILD_ROOT ]; then rm -rf $RPM_BUILD_ROOT fi mv %_topdir/tmpBBroot $RPM_BUILD_ROOT \@TMP_RPM_DEBUGINFO_INSTALL\@ %clean %post \@RPM_SYMLINK_POSTINSTALL\@ \@CPACK_RPM_SPEC_POSTINSTALL\@ %postun \@CPACK_RPM_SPEC_POSTUNINSTALL\@ %pre \@CPACK_RPM_SPEC_PREINSTALL\@ %preun \@CPACK_RPM_SPEC_PREUNINSTALL\@ %files %defattr(\@TMP_DEFAULT_FILE_PERMISSIONS\@,\@TMP_DEFAULT_USER\@,\@TMP_DEFAULT_GROUP\@,\@TMP_DEFAULT_DIR_PERMISSIONS\@) \@CPACK_RPM_INSTALL_FILES\@ \@CPACK_RPM_ABSOLUTE_INSTALL_FILES\@ \@CPACK_RPM_USER_INSTALL_FILES\@ %changelog \@CPACK_RPM_SPEC_CHANGELOG\@ " ) endif() # Stop here if we were asked to only generate a template USER spec file # The generated file may then be used as a template by user who wants # to customize their own spec file. if(CPACK_RPM_GENERATE_USER_BINARY_SPECFILE_TEMPLATE) message(FATAL_ERROR "CPackRPM: STOP here Generated USER binary spec file template is: ${CPACK_RPM_BINARY_SPECFILE}.in") endif() endif() # After that we may either use a user provided spec file # or generate one using appropriate variables value. if(CPACK_RPM_USER_BINARY_SPECFILE) # User may have specified SPECFILE just use it message("CPackRPM: Will use USER specified spec file: ${CPACK_RPM_USER_BINARY_SPECFILE}") # The user provided file is processed for @var replacement configure_file(${CPACK_RPM_USER_BINARY_SPECFILE} ${CPACK_RPM_BINARY_SPECFILE} @ONLY) else() # No User specified spec file, will use the generated spec file message("CPackRPM: Will use GENERATED spec file: ${CPACK_RPM_BINARY_SPECFILE}") # Note the just created file is processed for @var replacement configure_file(${CPACK_RPM_BINARY_SPECFILE}.in ${CPACK_RPM_BINARY_SPECFILE} @ONLY) endif() if(RPMBUILD_EXECUTABLE) # Now call rpmbuild using the SPECFILE execute_process( COMMAND "${RPMBUILD_EXECUTABLE}" ${RPMBUILD_FLAGS} --define "_topdir ${CPACK_RPM_DIRECTORY}" --buildroot "%_topdir/${CPACK_PACKAGE_FILE_NAME}${CPACK_RPM_PACKAGE_COMPONENT_PART_PATH}" --target "${CPACK_RPM_PACKAGE_ARCHITECTURE}" "${CPACK_RPM_BINARY_SPECFILE}" WORKING_DIRECTORY "${CPACK_TOPLEVEL_DIRECTORY}/${CPACK_PACKAGE_FILE_NAME}${CPACK_RPM_PACKAGE_COMPONENT_PART_PATH}" RESULT_VARIABLE CPACK_RPMBUILD_EXEC_RESULT ERROR_FILE "${CPACK_TOPLEVEL_DIRECTORY}/rpmbuild${CPACK_RPM_PACKAGE_NAME}.err" OUTPUT_FILE "${CPACK_TOPLEVEL_DIRECTORY}/rpmbuild${CPACK_RPM_PACKAGE_NAME}.out") if(CPACK_RPM_PACKAGE_DEBUG OR CPACK_RPMBUILD_EXEC_RESULT) file(READ ${CPACK_TOPLEVEL_DIRECTORY}/rpmbuild${CPACK_RPM_PACKAGE_NAME}.err RPMBUILDERR) file(READ ${CPACK_TOPLEVEL_DIRECTORY}/rpmbuild${CPACK_RPM_PACKAGE_NAME}.out RPMBUILDOUT) message("CPackRPM:Debug: You may consult rpmbuild logs in: ") message("CPackRPM:Debug: - ${CPACK_TOPLEVEL_DIRECTORY}/rpmbuild${CPACK_RPM_PACKAGE_NAME}.err") message("CPackRPM:Debug: *** ${RPMBUILDERR} ***") message("CPackRPM:Debug: - ${CPACK_TOPLEVEL_DIRECTORY}/rpmbuild${CPACK_RPM_PACKAGE_NAME}.out") message("CPackRPM:Debug: *** ${RPMBUILDOUT} ***") endif() else() if(ALIEN_EXECUTABLE) message(FATAL_ERROR "RPM packaging through alien not done (yet)") endif() endif() # find generated rpm files and take their names cmake_policy(PUSH) # Tell file(GLOB_RECURSE) not to follow directory symlinks # even if the project does not set this policy to NEW. cmake_policy(SET CMP0009 NEW) file(GLOB_RECURSE GENERATED_FILES "${CPACK_RPM_DIRECTORY}/RPMS/*.rpm" "${CPACK_RPM_DIRECTORY}/SRPMS/*.rpm") cmake_policy(POP) if(NOT GENERATED_FILES) message(FATAL_ERROR "RPM package was not generated! ${CPACK_RPM_DIRECTORY}") endif() if(CPACK_RPM_DEBUGINFO_PACKAGE AND NOT CPACK_RPM_FILE_NAME STREQUAL "RPM-DEFAULT") string(TOLOWER "${CPACK_RPM_PACKAGE_NAME}-${CPACK_PACKAGE_VERSION}.*\\.rpm" EXPECTED_FILENAME) foreach(F IN LISTS GENERATED_FILES) if(F MATCHES ".*/${EXPECTED_FILENAME}") get_filename_component(FILE_PATH "${F}" DIRECTORY) file(RENAME "${F}" "${FILE_PATH}/${CPACK_RPM_FILE_NAME}") list(APPEND new_files_list_ "${FILE_PATH}/${CPACK_RPM_FILE_NAME}") else() list(APPEND new_files_list_ "${F}") endif() endforeach() set(GENERATED_FILES "${new_files_list_}") endif() set(GEN_CPACK_OUTPUT_FILES "${GENERATED_FILES}" PARENT_SCOPE) if(CPACK_RPM_PACKAGE_DEBUG) message("CPackRPM:Debug: GEN_CPACK_OUTPUT_FILES = ${GENERATED_FILES}") endif() endfunction() cpack_rpm_generate_package()