# Distributed under the OSI-approved BSD 3-Clause License. See accompanying # file Copyright.txt or https://cmake.org/licensing for details. #.rst: # FindMPI # ------- # # Find a Message Passing Interface (MPI) implementation. # # The Message Passing Interface (MPI) is a library used to write # high-performance distributed-memory parallel applications, and is # typically deployed on a cluster. MPI is a standard interface (defined # by the MPI forum) for which many implementations are available. # # Variables for using MPI # ^^^^^^^^^^^^^^^^^^^^^^^ # # The module exposes the components ``C``, ``CXX``, ``MPICXX`` and ``Fortran``. # Each of these controls the various MPI languages to search for. # The difference between ``CXX`` and ``MPICXX`` is that ``CXX`` refers to the # MPI C API being usable from C++, whereas ``MPICXX`` refers to the MPI-2 C++ API # that was removed again in MPI-3. # # Depending on the enabled components the following variables will be set: # # ``MPI_FOUND`` # Variable indicating that MPI settings for all requested languages have been found. # If no components are specified, this is true if MPI settings for all enabled languages # were detected. Note that the ``MPICXX`` component does not affect this variable. # ``MPI_VERSION`` # Minimal version of MPI detected among the requested languages, or all enabled languages # if no components were specified. # # This module will set the following variables per language in your # project, where ```` is one of C, CXX, or Fortran: # # ``MPI__FOUND`` # Variable indicating the MPI settings for ```` were found and that # simple MPI test programs compile with the provided settings. # ``MPI__COMPILER`` # MPI compiler for ```` if such a program exists. # ``MPI__COMPILE_OPTIONS`` # Compilation options for MPI programs in ````, given as a :ref:`;-list `. # ``MPI__COMPILE_DEFINITIONS`` # Compilation definitions for MPI programs in ````, given as a :ref:`;-list `. # ``MPI__INCLUDE_DIRS`` # Include path(s) for MPI header. # ``MPI__LINK_FLAGS`` # Linker flags for MPI programs. # ``MPI__LIBRARIES`` # All libraries to link MPI programs against. # # Additionally, the following :prop_tgt:`IMPORTED` targets are defined: # # ``MPI::MPI_`` # Target for using MPI from ````. # # The following variables indicating which bindings are present will be defined: # # ``MPI_MPICXX_FOUND`` # Variable indicating whether the MPI-2 C++ bindings are present (introduced in MPI-2, removed with MPI-3). # ``MPI_Fortran_HAVE_F77_HEADER`` # True if the Fortran 77 header ``mpif.h`` is available. # ``MPI_Fortran_HAVE_F90_MODULE`` # True if the Fortran 90 module ``mpi`` can be used for accessing MPI (MPI-2 and higher only). # ``MPI_Fortran_HAVE_F08_MODULE`` # True if the Fortran 2008 ``mpi_f08`` is available to MPI programs (MPI-3 and higher only). # # If possible, the MPI version will be determined by this module. The facilities to detect the MPI version # were introduced with MPI-1.2, and therefore cannot be found for older MPI versions. # # ``MPI__VERSION_MAJOR`` # Major version of MPI implemented for ```` by the MPI distribution. # ``MPI__VERSION_MINOR`` # Minor version of MPI implemented for ```` by the MPI distribution. # ``MPI__VERSION`` # MPI version implemented for ```` by the MPI distribution. # # Note that there's no variable for the C bindings being accessible through ``mpi.h``, since the MPI standards # always have required this binding to work in both C and C++ code. # # For running MPI programs, the module sets the following variables # # ``MPIEXEC_EXECUTABLE`` # Executable for running MPI programs, if such exists. # ``MPIEXEC_NUMPROC_FLAG`` # Flag to pass to ``mpiexec`` before giving it the number of processors to run on. # ``MPIEXEC_MAX_NUMPROCS`` # Number of MPI processors to utilize. Defaults to the number # of processors detected on the host system. # ``MPIEXEC_PREFLAGS`` # Flags to pass to ``mpiexec`` directly before the executable to run. # ``MPIEXEC_POSTFLAGS`` # Flags to pass to ``mpiexec`` after other flags. # # Variables for locating MPI # ^^^^^^^^^^^^^^^^^^^^^^^^^^ # # This module performs a three step search for an MPI implementation: # # 1. Check if the compiler has MPI support built-in. This is the case if the user passed a # compiler wrapper as ``CMAKE__COMPILER`` or if they're on a Cray system. # 2. Attempt to find an MPI compiler wrapper and determine the compiler information from it. # 3. Try to find an MPI implementation that does not ship such a wrapper by guessing settings. # Currently, only Microsoft MPI and MPICH2 on Windows are supported. # # For controlling the second step, the following variables may be set: # # ``MPI__COMPILER`` # Search for the specified compiler wrapper and use it. # ``MPI__COMPILER_FLAGS`` # Flags to pass to the MPI compiler wrapper during interrogation. Some compiler wrappers # support linking debug or tracing libraries if a specific flag is passed and this variable # may be used to obtain them. # ``MPI_COMPILER_FLAGS`` # Used to initialize ``MPI__COMPILER_FLAGS`` if no language specific flag has been given. # Empty by default. # ``MPI_EXECUTABLE_SUFFIX`` # A suffix which is appended to all names that are being looked for. For instance you may set this # to ``.mpich`` or ``.openmpi`` to prefer the one or the other on Debian and its derivatives. # # In order to control the guessing step, the following variable may be set: # # ``MPI_GUESS_LIBRARY_NAME`` # Valid values are ``MSMPI`` and ``MPICH2``. If set, only the given library will be searched for. # By default, ``MSMPI`` will be preferred over ``MPICH2`` if both are available. # This also sets ``MPI_SKIP_COMPILER_WRAPPER`` to ``true``, which may be overridden. # # Each of the search steps may be skipped with the following control variables: # # ``MPI_ASSUME_NO_BUILTIN_MPI`` # If true, the module assumes that the compiler itself does not provide an MPI implementation and # skips to step 2. # ``MPI_SKIP_COMPILER_WRAPPER`` # If true, no compiler wrapper will be searched for. # ``MPI_SKIP_GUESSING`` # If true, the guessing step will be skipped. # # Additionally, the following control variable is available to change search behavior: # # ``MPI_CXX_SKIP_MPICXX`` # Add some definitions that will disable the MPI-2 C++ bindings. # Currently supported are MPICH, Open MPI, Platform MPI and derivatives thereof, # for example MVAPICH or Intel MPI. # # If the find procedure fails for a variable ``MPI__WORKS``, then the settings detected by or passed to # the module did not work and even a simple MPI test program failed to compile. # # If all of these parameters were not sufficient to find the right MPI implementation, a user may # disable the entire autodetection process by specifying both a list of libraries in ``MPI__LIBRARIES`` # and a list of include directories in ``MPI__ADDITIONAL_INCLUDE_DIRS``. # Any other variable may be set in addition to these two. The module will then validate the MPI settings and store the # settings in the cache. # # Cache variables for MPI # ^^^^^^^^^^^^^^^^^^^^^^^ # # The variable ``MPI__INCLUDE_DIRS`` will be assembled from the following variables. # For C and CXX: # # ``MPI__HEADER_DIR`` # Location of the ``mpi.h`` header on disk. # # For Fortran: # # ``MPI_Fortran_F77_HEADER_DIR`` # Location of the Fortran 77 header ``mpif.h``, if it exists. # ``MPI_Fortran_MODULE_DIR`` # Location of the ``mpi`` or ``mpi_f08`` modules, if available. # # For all languages the following variables are additionally considered: # # ``MPI__ADDITIONAL_INCLUDE_DIRS`` # A :ref:`;-list ` of paths needed in addition to the normal include directories. # ``MPI__INCLUDE_DIR`` # Path variables for include folders referred to by ````. # ``MPI__ADDITIONAL_INCLUDE_VARS`` # A :ref:`;-list ` of ```` that will be added to the include locations of ````. # # The variable ``MPI__LIBRARIES`` will be assembled from the following variables: # # ``MPI__LIBRARY`` # The location of a library called ```` for use with MPI. # ``MPI__LIB_NAMES`` # A :ref:`;-list ` of ```` that will be added to the include locations of ````. # # Usage of mpiexec # ^^^^^^^^^^^^^^^^ # # When using ``MPIEXEC_EXECUTABLE`` to execute MPI applications, you should typically # use all of the ``MPIEXEC_EXECUTABLE`` flags as follows: # # :: # # ${MPIEXEC_EXECUTABLE} ${MPIEXEC_NUMPROC_FLAG} ${MPIEXEC_MAX_NUMPROCS} # ${MPIEXEC_PREFLAGS} EXECUTABLE ${MPIEXEC_POSTFLAGS} ARGS # # where ``EXECUTABLE`` is the MPI program, and ``ARGS`` are the arguments to # pass to the MPI program. # # Advanced variables for using MPI # ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ # # The module can perform some advanced feature detections upon explicit request. # # **Important notice:** The following checks cannot be performed without *executing* an MPI test program. # Consider the special considerations for the behavior of :command:`try_run` during cross compilation. # Moreover, running an MPI program can cause additional issues, like a firewall notification on some systems. # You should only enable these detections if you absolutely need the information. # # If the following variables are set to true, the respective search will be performed: # # ``MPI_DETERMINE_Fortran_CAPABILITIES`` # Determine for all available Fortran bindings what the values of ``MPI_SUBARRAYS_SUPPORTED`` and # ``MPI_ASYNC_PROTECTS_NONBLOCKING`` are and make their values available as ``MPI_Fortran__SUBARRAYS`` # and ``MPI_Fortran__ASYNCPROT``, where ```` is one of ``F77_HEADER``, ``F90_MODULE`` and # ``F08_MODULE``. # ``MPI_DETERMINE_LIBRARY_VERSION`` # For each language, find the output of ``MPI_Get_library_version`` and make it available as ``MPI__LIBRARY_VERSION``. # This information is usually tied to the runtime component of an MPI implementation and might differ depending on ````. # Note that the return value is entirely implementation defined. This information might be used to identify # the MPI vendor and for example pick the correct one of multiple third party binaries that matches the MPI vendor. # # Backward Compatibility # ^^^^^^^^^^^^^^^^^^^^^^ # # For backward compatibility with older versions of FindMPI, these # variables are set, but deprecated: # # :: # # MPI_COMPILER MPI_LIBRARY MPI_EXTRA_LIBRARY # MPI_COMPILE_FLAGS MPI_INCLUDE_PATH MPI_LINK_FLAGS # MPI_LIBRARIES # # In new projects, please use the ``MPI__XXX`` equivalents. # Additionally, the following variables are deprecated: # # ``MPI__COMPILE_FLAGS`` # Use ``MPI__COMPILE_OPTIONS`` and ``MPI__COMPILE_DEFINITIONS`` instead. # ``MPI__INCLUDE_PATH`` # For consumption use ``MPI__INCLUDE_DIRS`` and for specifying folders use ``MPI__ADDITIONAL_INCLUDE_DIRS`` instead. # ``MPIEXEC`` # Use ``MPIEXEC_EXECUTABLE`` instead. cmake_policy(PUSH) cmake_policy(SET CMP0057 NEW) # if IN_LIST include(${CMAKE_CURRENT_LIST_DIR}/FindPackageHandleStandardArgs.cmake) # Generic compiler names set(_MPI_C_GENERIC_COMPILER_NAMES mpicc mpcc mpicc_r mpcc_r) set(_MPI_CXX_GENERIC_COMPILER_NAMES mpicxx mpiCC mpcxx mpCC mpic++ mpc++ mpicxx_r mpiCC_r mpcxx_r mpCC_r mpic++_r mpc++_r) set(_MPI_Fortran_GENERIC_COMPILER_NAMES mpif95 mpif95_r mpf95 mpf95_r mpif90 mpif90_r mpf90 mpf90_r mpif77 mpif77_r mpf77 mpf77_r mpifc) # GNU compiler names set(_MPI_GNU_C_COMPILER_NAMES mpigcc mpgcc mpigcc_r mpgcc_r) set(_MPI_GNU_CXX_COMPILER_NAMES mpig++ mpg++ mpig++_r mpg++_r mpigxx) set(_MPI_GNU_Fortran_COMPILER_NAMES mpigfortran mpgfortran mpigfortran_r mpgfortran_r mpig77 mpig77_r mpg77 mpg77_r) # Intel MPI compiler names on Windows if(WIN32) list(APPEND _MPI_C_GENERIC_COMPILER_NAMES mpicc.bat) list(APPEND _MPI_CXX_GENERIC_COMPILER_NAMES mpicxx.bat) list(APPEND _MPI_Fortran_GENERIC_COMPILER_NAMES mpifc.bat) # Intel MPI compiler names set(_MPI_Intel_C_COMPILER_NAMES mpiicc.bat) set(_MPI_Intel_CXX_COMPILER_NAMES mpiicpc.bat) set(_MPI_Intel_Fortran_COMPILER_NAMES mpiifort.bat mpif77.bat mpif90.bat) # Intel MPI compiler names for MSMPI set(_MPI_MSVC_C_COMPILER_NAMES mpicl.bat) set(_MPI_MSVC_CXX_COMPILER_NAMES mpicl.bat) else() # Intel compiler names set(_MPI_Intel_C_COMPILER_NAMES mpiicc) set(_MPI_Intel_CXX_COMPILER_NAMES mpiicpc mpiicxx mpiic++) set(_MPI_Intel_Fortran_COMPILER_NAMES mpiifort mpiif95 mpiif90 mpiif77) endif() # PGI compiler names set(_MPI_PGI_C_COMPILER_NAMES mpipgcc mppgcc) set(_MPI_PGI_CXX_COMPILER_NAMES mpipgCC mppgCC) set(_MPI_PGI_Fortran_COMPILER_NAMES mpipgf95 mpipgf90 mppgf95 mppgf90 mpipgf77 mppgf77) # XLC MPI Compiler names set(_MPI_XL_C_COMPILER_NAMES mpxlc mpxlc_r mpixlc mpixlc_r) set(_MPI_XL_CXX_COMPILER_NAMES mpixlcxx mpixlC mpixlc++ mpxlcxx mpxlc++ mpixlc++ mpxlCC mpixlcxx_r mpixlC_r mpixlc++_r mpxlcxx_r mpxlc++_r mpixlc++_r mpxlCC_r) set(_MPI_XL_Fortran_COMPILER_NAMES mpixlf95 mpixlf95_r mpxlf95 mpxlf95_r mpixlf90 mpixlf90_r mpxlf90 mpxlf90_r mpixlf77 mpixlf77_r mpxlf77 mpxlf77_r mpixlf mpixlf_r mpxlf mpxlf_r) # Prepend vendor-specific compiler wrappers to the list. If we don't know the compiler, # attempt all of them. # By attempting vendor-specific compiler names first, we should avoid situations where the compiler wrapper # stems from a proprietary MPI and won't know which compiler it's being used for. For instance, Intel MPI # controls its settings via the I_MPI_CC environment variables if the generic name is being used. # If we know which compiler we're working with, we can use the most specialized wrapper there is in order to # pick up the right settings for it. foreach (LANG IN ITEMS C CXX Fortran) set(_MPI_${LANG}_COMPILER_NAMES "") foreach (id IN ITEMS GNU Intel MSVC PGI XL) if (NOT CMAKE_${LANG}_COMPILER_ID OR CMAKE_${LANG}_COMPILER_ID STREQUAL id) list(APPEND _MPI_${LANG}_COMPILER_NAMES ${_MPI_${id}_${LANG}_COMPILER_NAMES}${MPI_EXECUTABLE_SUFFIX}) endif() unset(_MPI_${id}_${LANG}_COMPILER_NAMES) endforeach() list(APPEND _MPI_${LANG}_COMPILER_NAMES ${_MPI_${LANG}_GENERIC_COMPILER_NAMES}${MPI_EXECUTABLE_SUFFIX}) unset(_MPI_${LANG}_GENERIC_COMPILER_NAMES) endforeach() # Names to try for mpiexec # Only mpiexec commands are guaranteed to behave as described in the standard, # mpirun commands are not covered by the standard in any way whatsoever. # lamexec is the executable for LAM/MPI, srun is for SLURM or Open MPI with SLURM support. # srun -n X is however a valid command, so it behaves 'like' mpiexec. set(_MPIEXEC_NAMES_BASE mpiexec mpiexec.hydra mpiexec.mpd mpirun lamexec srun) unset(_MPIEXEC_NAMES) foreach(_MPIEXEC_NAME IN LISTS _MPIEXEC_NAMES_BASE) list(APPEND _MPIEXEC_NAMES "${_MPIEXEC_NAME}${MPI_EXECUTABLE_SUFFIX}") endforeach() unset(_MPIEXEC_NAMES_BASE) function (_MPI_check_compiler LANG QUERY_FLAG OUTPUT_VARIABLE RESULT_VARIABLE) if(DEFINED MPI_${LANG}_COMPILER_FLAGS) separate_arguments(_MPI_COMPILER_WRAPPER_OPTIONS NATIVE_COMMAND "${MPI_${LANG}_COMPILER_FLAGS}") else() separate_arguments(_MPI_COMPILER_WRAPPER_OPTIONS NATIVE_COMMAND "${MPI_COMPILER_FLAGS}") endif() execute_process( COMMAND ${MPI_${LANG}_COMPILER} ${_MPI_COMPILER_WRAPPER_OPTIONS} ${QUERY_FLAG} OUTPUT_VARIABLE WRAPPER_OUTPUT OUTPUT_STRIP_TRAILING_WHITESPACE ERROR_VARIABLE WRAPPER_OUTPUT ERROR_STRIP_TRAILING_WHITESPACE RESULT_VARIABLE WRAPPER_RETURN) # Some compiler wrappers will yield spurious zero return values, for example # Intel MPI tolerates unknown arguments and if the MPI wrappers loads a shared # library that has invalid or missing version information there would be warning # messages emitted by ld.so in the compiler output. In either case, we'll treat # the output as invalid. if("${WRAPPER_OUTPUT}" MATCHES "undefined reference|unrecognized|need to set|no version information available|command not found") set(WRAPPER_RETURN 255) endif() # Ensure that no error output might be passed upwards. if(NOT WRAPPER_RETURN EQUAL 0) unset(WRAPPER_OUTPUT) endif() set(${OUTPUT_VARIABLE} "${WRAPPER_OUTPUT}" PARENT_SCOPE) set(${RESULT_VARIABLE} "${WRAPPER_RETURN}" PARENT_SCOPE) endfunction() function (_MPI_interrogate_compiler lang) unset(MPI_COMPILE_CMDLINE) unset(MPI_LINK_CMDLINE) unset(MPI_COMPILE_OPTIONS_WORK) unset(MPI_COMPILE_DEFINITIONS_WORK) unset(MPI_INCLUDE_DIRS_WORK) unset(MPI_LINK_FLAGS_WORK) unset(MPI_LIB_NAMES_WORK) unset(MPI_LIB_FULLPATHS_WORK) # Check whether the -showme:compile option works. This indicates that we have either Open MPI # or a newer version of LAM/MPI, and implies that -showme:link will also work. # Open MPI also supports -show, but separates linker and compiler information _MPI_check_compiler(${LANG} "-showme:compile" MPI_COMPILE_CMDLINE MPI_COMPILER_RETURN) if (MPI_COMPILER_RETURN EQUAL 0) _MPI_check_compiler(${LANG} "-showme:link" MPI_LINK_CMDLINE MPI_COMPILER_RETURN) if (NOT MPI_COMPILER_RETURN EQUAL 0) unset(MPI_COMPILE_CMDLINE) endif() endif() # MPICH and MVAPICH offer -compile-info and -link-info. # For modern versions, both do the same as -show. However, for old versions, they do differ # when called for mpicxx and mpif90 and it's necessary to use them over -show in order to find the # removed MPI C++ bindings. if (NOT MPI_COMPILER_RETURN EQUAL 0) _MPI_check_compiler(${LANG} "-compile-info" MPI_COMPILE_CMDLINE MPI_COMPILER_RETURN) if (MPI_COMPILER_RETURN EQUAL 0) _MPI_check_compiler(${LANG} "-link-info" MPI_LINK_CMDLINE MPI_COMPILER_RETURN) if (NOT MPI_COMPILER_RETURN EQUAL 0) unset(MPI_COMPILE_CMDLINE) endif() endif() endif() # MPICH, MVAPICH2 and Intel MPI just use "-show". Open MPI also offers this, but the # -showme commands are more specialized. if (NOT MPI_COMPILER_RETURN EQUAL 0) _MPI_check_compiler(${LANG} "-show" MPI_COMPILE_CMDLINE MPI_COMPILER_RETURN) endif() # Older versions of LAM/MPI have "-showme". Open MPI also supports this. # Unknown to MPICH, MVAPICH and Intel MPI. if (NOT MPI_COMPILER_RETURN EQUAL 0) _MPI_check_compiler(${LANG} "-showme" MPI_COMPILE_CMDLINE MPI_COMPILER_RETURN) endif() if (NOT (MPI_COMPILER_RETURN EQUAL 0) OR NOT (DEFINED MPI_COMPILE_CMDLINE)) # Cannot interrogate this compiler, so exit. set(MPI_${LANG}_WRAPPER_FOUND FALSE PARENT_SCOPE) return() endif() unset(MPI_COMPILER_RETURN) # We have our command lines, but we might need to copy MPI_COMPILE_CMDLINE # into MPI_LINK_CMDLINE, if we didn't find the link line. if (NOT DEFINED MPI_LINK_CMDLINE) set(MPI_LINK_CMDLINE "${MPI_COMPILE_CMDLINE}") endif() # At this point, we obtained some output from a compiler wrapper that works. # We'll now try to parse it into variables with meaning to us. if("${LANG}" STREQUAL "Fortran") # Some MPICH-1 and MVAPICH-1 versions return a three command answer for Fortran, consisting # out of a symlink command for mpif.h, the actual compiler command and a deletion of the # created symlink. We need to detect that case, remember the include path and drop the # symlink/deletion operation to obtain the link/compile lines we'd usually expect. if("${MPI_COMPILE_CMDLINE}" MATCHES "^ln -s ([^\" ]+|\"[^\"]+\") mpif.h") get_filename_component(MPI_INCLUDE_DIRS_WORK "${CMAKE_MATCH_1}" DIRECTORY) string(REGEX REPLACE "^ln -s ([^\" ]+|\"[^\"]+\") mpif.h\n" "" MPI_COMPILE_CMDLINE "${MPI_COMPILE_CMDLINE}") string(REGEX REPLACE "^ln -s ([^\" ]+|\"[^\"]+\") mpif.h\n" "" MPI_LINK_CMDLINE "${MPI_LINK_CMDLINE}") string(REGEX REPLACE "\nrm -f mpif.h$" "" MPI_COMPILE_CMDLINE "${MPI_COMPILE_CMDLINE}") string(REGEX REPLACE "\nrm -f mpif.h$" "" MPI_LINK_CMDLINE "${MPI_LINK_CMDLINE}") endif() endif() # The Intel MPI wrapper on Linux will emit some objcopy commands after its compile command # if -static_mpi was passed to the wrapper. To avoid spurious matches, we need to drop these lines. if(UNIX) string(REGEX REPLACE "(^|\n)objcopy[^\n]+(\n|$)" "" MPI_COMPILE_CMDLINE "${MPI_COMPILE_CMDLINE}") string(REGEX REPLACE "(^|\n)objcopy[^\n]+(\n|$)" "" MPI_LINK_CMDLINE "${MPI_LINK_CMDLINE}") endif() # Extract compile options from the compile command line. string(REGEX MATCHALL "(^| )-f([^\" ]+|\"[^\"]+\")" MPI_ALL_COMPILE_OPTIONS "${MPI_COMPILE_CMDLINE}") foreach(_MPI_COMPILE_OPTION IN LISTS MPI_ALL_COMPILE_OPTIONS) string(REGEX REPLACE "^ " "" _MPI_COMPILE_OPTION "${_MPI_COMPILE_OPTION}") # Ignore -fstack-protector directives: These occur on MPICH and MVAPICH when the libraries # themselves were built with this flag. However, this flag is unrelated to using MPI, and # we won't match the accompanying --param-ssp-size and -Wp,-D_FORTIFY_SOURCE flags and therefore # produce inconsistent results with the regularly flags. # Similarly, aliasing flags do not belong into our flag array. if(NOT "${_MPI_COMPILE_OPTION}" MATCHES "^-f(stack-protector|(no-|)strict-aliasing|PI[CE]|pi[ce])") list(APPEND MPI_COMPILE_OPTIONS_WORK "${_MPI_COMPILE_OPTION}") endif() endforeach() # Same deal, with the definitions. We also treat arguments passed to the preprocessor directly. string(REGEX MATCHALL "(^| )(-Wp,|-Xpreprocessor |)[-/]D([^\" ]+|\"[^\"]+\")" MPI_ALL_COMPILE_DEFINITIONS "${MPI_COMPILE_CMDLINE}") foreach(_MPI_COMPILE_DEFINITION IN LISTS MPI_ALL_COMPILE_DEFINITIONS) string(REGEX REPLACE "^ ?(-Wp,|-Xpreprocessor )?[-/]D" "" _MPI_COMPILE_DEFINITION "${_MPI_COMPILE_DEFINITION}") string(REPLACE "\"" "" _MPI_COMPILE_DEFINITION "${_MPI_COMPILE_DEFINITION}") if(NOT "${_MPI_COMPILE_DEFINITION}" MATCHES "^_FORTIFY_SOURCE.*") list(APPEND MPI_COMPILE_DEFINITIONS_WORK "${_MPI_COMPILE_DEFINITION}") endif() endforeach() # Extract include paths from compile command line string(REGEX MATCHALL "(^| )[-/]I([^\" ]+|\"[^\"]+\")" MPI_ALL_INCLUDE_PATHS "${MPI_COMPILE_CMDLINE}") # If extracting failed to work, we'll try using -showme:incdirs. if (NOT MPI_ALL_INCLUDE_PATHS) _MPI_check_compiler(${LANG} "-showme:incdirs" MPI_INCDIRS_CMDLINE MPI_INCDIRS_COMPILER_RETURN) if(MPI_INCDIRS_COMPILER_RETURN) separate_arguments(MPI_ALL_INCLUDE_PATHS NATIVE_COMMAND "${MPI_INCDIRS_CMDLINE}") endif() endif() foreach(_MPI_INCLUDE_PATH IN LISTS MPI_ALL_INCLUDE_PATHS) string(REGEX REPLACE "^ ?[-/]I" "" _MPI_INCLUDE_PATH "${_MPI_INCLUDE_PATH}") string(REPLACE "\"" "" _MPI_INCLUDE_PATH "${_MPI_INCLUDE_PATH}") get_filename_component(_MPI_INCLUDE_PATH "${_MPI_INCLUDE_PATH}" REALPATH) list(APPEND MPI_INCLUDE_DIRS_WORK "${_MPI_INCLUDE_PATH}") endforeach() # Extract linker paths from the link command line string(REGEX MATCHALL "(^| )(-Wl,|-Xlinker |)(-L|[/-]LIBPATH:|[/-]libpath:)([^\" ]+|\"[^\"]+\")" MPI_ALL_LINK_PATHS "${MPI_LINK_CMDLINE}") # If extracting failed to work, we'll try using -showme:libdirs. if (NOT MPI_ALL_LINK_PATHS) _MPI_check_compiler(${LANG} "-showme:libdirs" MPI_LIBDIRS_CMDLINE MPI_LIBDIRS_COMPILER_RETURN) if(MPI_LIBDIRS_COMPILER_RETURN) separate_arguments(MPI_ALL_LINK_PATHS NATIVE_COMMAND "${MPI_LIBDIRS_CMDLINE}") endif() endif() foreach(_MPI_LPATH IN LISTS MPI_ALL_LINK_PATHS) string(REGEX REPLACE "^ ?(-Wl,|-Xlinker )?(-L|[/-]LIBPATH:|[/-]libpath:)" "" _MPI_LPATH "${_MPI_LPATH}") string(REPLACE "\"" "" _MPI_LPATH "${_MPI_LPATH}") get_filename_component(_MPI_LPATH "${_MPI_LPATH}" REALPATH) list(APPEND MPI_LINK_DIRECTORIES_WORK "${_MPI_LPATH}") endforeach() # Extract linker flags from the link command line string(REGEX MATCHALL "(^| )(-Wl,|-Xlinker )([^\" ]+|\"[^\"]+\")" MPI_ALL_LINK_FLAGS "${MPI_LINK_CMDLINE}") foreach(_MPI_LINK_FLAG IN LISTS MPI_ALL_LINK_FLAGS) string(STRIP "${_MPI_LINK_FLAG}" _MPI_LINK_FLAG) # MPI might be marked to build with non-executable stacks but this should not propagate. if (NOT "${_MPI_LINK_FLAG}" MATCHES "(-Wl,|-Xlinker )-z,noexecstack") if (MPI_LINK_FLAGS_WORK) string(APPEND MPI_LINK_FLAGS_WORK " ${_MPI_LINK_FLAG}") else() set(MPI_LINK_FLAGS_WORK "${_MPI_LINK_FLAG}") endif() endif() endforeach() # Extract the set of libraries to link against from the link command # line string(REGEX MATCHALL "(^| )-l([^\" ]+|\"[^\"]+\")" MPI_LIBNAMES "${MPI_LINK_CMDLINE}") foreach(_MPI_LIB_NAME IN LISTS MPI_LIBNAMES) string(REGEX REPLACE "^ ?-l" "" _MPI_LIB_NAME "${_MPI_LIB_NAME}") string(REPLACE "\"" "" _MPI_LIB_NAME "${_MPI_LIB_NAME}") get_filename_component(_MPI_LIB_PATH "${_MPI_LIB_NAME}" DIRECTORY) if(NOT "${_MPI_LIB_PATH}" STREQUAL "") list(APPEND MPI_LIB_FULLPATHS_WORK "${_MPI_LIB_NAME}") else() list(APPEND MPI_LIB_NAMES_WORK "${_MPI_LIB_NAME}") endif() endforeach() if(WIN32) # A compiler wrapper on Windows will just have the name of the # library to link on its link line, potentially with a full path string(REGEX MATCHALL "(^| )([^\" ]+\\.lib|\"[^\"]+\\.lib\")" MPI_LIBNAMES "${MPI_LINK_CMDLINE}") foreach(_MPI_LIB_NAME IN LISTS MPI_LIBNAMES) string(REGEX REPLACE "^ " "" _MPI_LIB_NAME "${_MPI_LIB_NAME}") string(REPLACE "\"" "" _MPI_LIB_NAME "${_MPI_LIB_NAME}") get_filename_component(_MPI_LIB_PATH "${_MPI_LIB_NAME}" DIRECTORY) if(NOT "${_MPI_LIB_PATH}" STREQUAL "") list(APPEND MPI_LIB_FULLPATHS_WORK "${_MPI_LIB_NAME}") else() list(APPEND MPI_LIB_NAMES_WORK "${_MPI_LIB_NAME}") endif() endforeach() else() # On UNIX platforms, archive libraries can be given with full path. string(REGEX MATCHALL "(^| )([^\" ]+\\.a|\"[^\"]+\\.a\")" MPI_LIBFULLPATHS "${MPI_LINK_CMDLINE}") foreach(_MPI_LIB_NAME IN LISTS MPI_LIBFULLPATHS) string(REGEX REPLACE "^ " "" _MPI_LIB_NAME "${_MPI_LIB_NAME}") string(REPLACE "\"" "" _MPI_LIB_NAME "${_MPI_LIB_NAME}") get_filename_component(_MPI_LIB_PATH "${_MPI_LIB_NAME}" DIRECTORY) if(NOT "${_MPI_LIB_PATH}" STREQUAL "") list(APPEND MPI_LIB_FULLPATHS_WORK "${_MPI_LIB_NAME}") else() list(APPEND MPI_LIB_NAMES_WORK "${_MPI_LIB_NAME}") endif() endforeach() endif() # An MPI compiler wrapper could have its MPI libraries in the implictly # linked directories of the compiler itself. if(DEFINED CMAKE_${LANG}_IMPLICIT_LINK_DIRECTORIES) list(APPEND MPI_LINK_DIRECTORIES_WORK "${CMAKE_${LANG}_IMPLICIT_LINK_DIRECTORIES}") endif() # Determine full path names for all of the libraries that one needs # to link against in an MPI program unset(MPI_PLAIN_LIB_NAMES_WORK) foreach(_MPI_LIB_NAME IN LISTS MPI_LIB_NAMES_WORK) get_filename_component(_MPI_PLAIN_LIB_NAME "${_MPI_LIB_NAME}" NAME_WE) list(APPEND MPI_PLAIN_LIB_NAMES_WORK "${_MPI_PLAIN_LIB_NAME}") find_library(MPI_${_MPI_PLAIN_LIB_NAME}_LIBRARY NAMES "${_MPI_LIB_NAME}" "lib${_MPI_LIB_NAME}" HINTS ${MPI_LINK_DIRECTORIES_WORK} DOC "Location of the ${_MPI_PLAIN_LIB_NAME} library for MPI" ) mark_as_advanced(MPI_${_MPI_PLAIN_LIB_NAME}_LIBRARY) endforeach() # Deal with the libraries given with full path next unset(MPI_DIRECT_LIB_NAMES_WORK) foreach(_MPI_LIB_FULLPATH IN LISTS MPI_LIB_FULLPATHS_WORK) get_filename_component(_MPI_PLAIN_LIB_NAME "${_MPI_LIB_FULLPATH}" NAME_WE) get_filename_component(_MPI_LIB_NAME "${_MPI_LIB_FULLPATH}" NAME) get_filename_component(_MPI_LIB_PATH "${_MPI_LIB_FULLPATH}" DIRECTORY) list(APPEND MPI_DIRECT_LIB_NAMES_WORK "${_MPI_PLAIN_LIB_NAME}") find_library(MPI_${_MPI_PLAIN_LIB_NAME}_LIBRARY NAMES "${_MPI_LIB_NAME}" HINTS ${_MPI_LIB_PATH} DOC "Location of the ${_MPI_PLAIN_LIB_NAME} library for MPI" ) mark_as_advanced(MPI_${_MPI_PLAIN_LIB_NAME}_LIBRARY) endforeach() if(MPI_DIRECT_LIB_NAMES_WORK) set(MPI_PLAIN_LIB_NAMES_WORK "${MPI_DIRECT_LIB_NAMES_WORK};${MPI_PLAIN_LIB_NAMES_WORK}") endif() # MPI might require pthread to work. The above mechanism wouldn't detect it, but we need to # link it in that case. -lpthread is covered by the normal library treatment on the other hand. if("${MPI_COMPILE_CMDLINE}" MATCHES "-pthread") list(APPEND MPI_COMPILE_OPTIONS_WORK "-pthread") if(MPI_LINK_FLAGS_WORK) string(APPEND MPI_LINK_FLAGS_WORK " -pthread") else() set(MPI_LINK_FLAGS_WORK "-pthread") endif() endif() # If we found MPI, set up all of the appropriate cache entries if(NOT MPI_${LANG}_COMPILE_OPTIONS) set(MPI_${LANG}_COMPILE_OPTIONS ${MPI_COMPILE_OPTIONS_WORK} CACHE STRING "MPI ${LANG} compilation options" FORCE) endif() if(NOT MPI_${LANG}_COMPILE_DEFINITIONS) set(MPI_${LANG}_COMPILE_DEFINITIONS ${MPI_COMPILE_DEFINITIONS_WORK} CACHE STRING "MPI ${LANG} compilation definitions" FORCE) endif() if(NOT MPI_${LANG}_ADDITIONAL_INCLUDE_DIRS) set(MPI_${LANG}_ADDITIONAL_INCLUDE_DIRS ${MPI_INCLUDE_DIRS_WORK} CACHE STRING "MPI ${LANG} additional include directories" FORCE) endif() if(NOT MPI_${LANG}_LINK_FLAGS) set(MPI_${LANG}_LINK_FLAGS ${MPI_LINK_FLAGS_WORK} CACHE STRING "MPI ${LANG} linker flags" FORCE) endif() if(NOT MPI_${LANG}_LIB_NAMES) set(MPI_${LANG}_LIB_NAMES ${MPI_PLAIN_LIB_NAMES_WORK} CACHE STRING "MPI ${LANG} libraries to link against" FORCE) endif() set(MPI_${LANG}_WRAPPER_FOUND TRUE PARENT_SCOPE) endfunction() function(_MPI_guess_settings LANG) set(MPI_GUESS_FOUND FALSE) # Currently only MSMPI and MPICH2 on Windows are supported, so we can skip this search if we're not targeting that. if(WIN32) # MSMPI # The environment variables MSMPI_INC and MSMPILIB32/64 are the only ways of locating the MSMPI_SDK, # which is installed separately from the runtime. Thus it's possible to have mpiexec but not MPI headers # or import libraries and vice versa. if(NOT MPI_GUESS_LIBRARY_NAME OR "${MPI_GUESS_LIBRARY_NAME}" STREQUAL "MSMPI") # We first attempt to locate the msmpi.lib. Should be find it, we'll assume that the MPI present is indeed # Microsoft MPI. if("${CMAKE_SIZEOF_VOID_P}" EQUAL 8) set(MPI_MSMPI_LIB_PATH "$ENV{MSMPI_LIB64}") set(MPI_MSMPI_INC_PATH_EXTRA "$ENV{MSMPI_INC}/x64") else() set(MPI_MSMPI_LIB_PATH "$ENV{MSMPI_LIB32}") set(MPI_MSMPI_INC_PATH_EXTRA "$ENV{MSMPI_INC}/x86") endif() find_library(MPI_msmpi_LIBRARY NAMES msmpi HINTS ${MPI_MSMPI_LIB_PATH} DOC "Location of the msmpi library for Microsoft MPI") mark_as_advanced(MPI_msmpi_LIBRARY) if(MPI_msmpi_LIBRARY) # Next, we attempt to locate the MPI header. Note that for Fortran we know that mpif.h is a way # MSMPI can be used and therefore that header has to be present. if(NOT MPI_${LANG}_ADDITIONAL_INCLUDE_DIRS) get_filename_component(MPI_MSMPI_INC_DIR "$ENV{MSMPI_INC}" REALPATH) set(MPI_${LANG}_ADDITIONAL_INCLUDE_DIRS "${MPI_MSMPI_INC_DIR}" CACHE STRING "MPI ${LANG} additional include directories" FORCE) unset(MPI_MSMPI_INC_DIR) endif() # For MSMPI, one can compile the MPI module by building the mpi.f90 shipped with the MSMPI SDK, # thus it might be present or provided by the user. Figuring out which is supported is done later on. # The PGI Fortran compiler for instance ships a prebuilt set of modules in its own include folder. # Should a user be employing PGI or have built its own set and provided it via cache variables, the # splitting routine would have located the module files. # For C and C++, we're done here (MSMPI does not ship the MPI-2 C++ bindings) - however, for Fortran # we need some extra library to glue Fortran support together: # MSMPI ships 2-4 Fortran libraries, each for different Fortran compiler behaviors. The library names # ending with a c are using the cdecl calling convention, whereas those ending with an s are for Fortran # implementations using stdcall. Therefore, the 64-bit MSMPI only ships those ending in 'c', whereas the 32-bit # has both variants available. # The second difference is the last but one letter, if it's an e(nd), the length of a string argument is # passed by the Fortran compiler after all other arguments on the parameter list, if it's an m(ixed), # it's passed immediately after the string address. # To summarize: # - msmpifec: CHARACTER length passed after the parameter list and using cdecl calling convention # - msmpifmc: CHARACTER length passed directly after string address and using cdecl calling convention # - msmpifes: CHARACTER length passed after the parameter list and using stdcall calling convention # - msmpifms: CHARACTER length passed directly after string address and using stdcall calling convention # 32-bit MSMPI ships all four libraries, 64-bit MSMPI ships only the first two. # As is, Intel Fortran and PGI Fortran both use the 'ec' variant of the calling convention, whereas # the old Compaq Visual Fortran compiler defaulted to the 'ms' version. It's possible to make Intel Fortran # use the CVF calling convention using /iface:cvf, but we assume - and this is also assumed in FortranCInterface - # this isn't the case. It's also possible to make CVF use the 'ec' variant, using /iface=(cref,nomixed_str_len_arg). # Our strategy is now to locate all libraries, but enter msmpifec into the LIB_NAMES array. # Should this not be adequate it's a straightforward way for a user to change the LIB_NAMES array and # have his library found. Still, this should not be necessary outside of exceptional cases, as reasoned. if ("${LANG}" STREQUAL "Fortran") set(MPI_MSMPI_CALLINGCONVS c) if("${CMAKE_SIZEOF_VOID_P}" EQUAL 4) list(APPEND MPI_MSMPI_CALLINGCONVS s) endif() foreach(mpistrlenpos IN ITEMS e m) foreach(mpicallingconv IN LISTS MPI_MSMPI_CALLINGCONVS) find_library(MPI_msmpif${mpistrlenpos}${mpicallingconv}_LIBRARY NAMES msmpif${mpistrlenpos}${mpicallingconv} HINTS "${MPI_MSMPI_LIB_PATH}" DOC "Location of the msmpi${mpistrlenpos}${mpicallingconv} library for Microsoft MPI") mark_as_advanced(MPI_msmpif${mpistrlenpos}${mpicallingconv}_LIBRARY) endforeach() endforeach() if(NOT MPI_${LANG}_LIB_NAMES) set(MPI_${LANG}_LIB_NAMES "msmpi;msmpifec" CACHE STRING "MPI ${LANG} libraries to link against" FORCE) endif() # At this point we're *not* done. MSMPI requires an additional include file for Fortran giving the value # of MPI_AINT. This file is called mpifptr.h located in the x64 and x86 subfolders, respectively. find_path(MPI_mpifptr_INCLUDE_DIR NAMES "mpifptr.h" HINTS "${MPI_MSMPI_INC_PATH_EXTRA}" DOC "Location of the mpifptr.h extra header for Microsoft MPI") if(NOT MPI_${LANG}_ADDITIONAL_INCLUDE_VARS) set(MPI_${LANG}_ADDITIONAL_INCLUDE_VARS "mpifptr" CACHE STRING "MPI ${LANG} additional include directory variables, given in the form MPI__INCLUDE_DIR." FORCE) endif() mark_as_advanced(MPI_${LANG}_ADDITIONAL_INCLUDE_VARS MPI_mpifptr_INCLUDE_DIR) else() if(NOT MPI_${LANG}_LIB_NAMES) set(MPI_${LANG}_LIB_NAMES "msmpi" CACHE STRING "MPI ${LANG} libraries to link against" FORCE) endif() endif() mark_as_advanced(MPI_${LANG}_LIB_NAMES) set(MPI_GUESS_FOUND TRUE) endif() endif() # At this point there's not many MPIs that we could still consider. # OpenMPI 1.6.x and below supported Windows, but these ship compiler wrappers that still work. # The only other relevant MPI implementation without a wrapper is MPICH2, which had Windows support in 1.4.1p1 and older. if(NOT MPI_GUESS_LIBRARY_NAME OR "${MPI_GUESS_LIBRARY_NAME}" STREQUAL "MPICH2") set(MPI_MPICH_PREFIX_PATHS "$ENV{ProgramW6432}/MPICH2/lib" "[HKEY_LOCAL_MACHINE\\SOFTWARE\\MPICH\\SMPD;binary]/../lib" "[HKEY_LOCAL_MACHINE\\SOFTWARE\\MPICH2;Path]/lib" ) # All of C, C++ and Fortran will need mpi.lib, so we'll look for this first find_library(MPI_mpi_LIBRARY NAMES mpi HINTS ${MPI_MPICH_PREFIX_PATHS}) mark_as_advanced(MPI_mpi_LIBRARY) # If we found mpi.lib, we detect the rest of MPICH2 if(MPI_mpi_LIBRARY) set(MPI_MPICH_LIB_NAMES "mpi") # If MPI-2 C++ bindings are requested, we need to locate cxx.lib as well. # Otherwise, MPICH_SKIP_MPICXX will be defined and these bindings aren't needed. if("${LANG}" STREQUAL "CXX" AND NOT MPI_CXX_SKIP_MPICXX) find_library(MPI_cxx_LIBRARY NAMES cxx HINTS ${MPI_MPICH_PREFIX_PATHS}) mark_as_advanced(MPI_cxx_LIBRARY) list(APPEND MPI_MPICH_LIB_NAMES "cxx") # For Fortran, MPICH2 provides three different libraries: # fmpich2.lib which uses uppercase symbols and cdecl, # fmpich2s.lib which uses uppercase symbols and stdcall (32-bit only), # fmpich2g.lib which uses lowercase symbols with double underscores and cdecl. # fmpich2s.lib would be useful for Compaq Visual Fortran, fmpich2g.lib has to be used with GNU g77 and is also # provided in the form of an .a archive for MinGW and Cygwin. From our perspective, fmpich2.lib is the only one # we need to try, and if it doesn't work with the given Fortran compiler we'd find out later on during validation elseif("${LANG}" STREQUAL "Fortran") find_library(MPI_fmpich2_LIBRARY NAMES fmpich2 HINTS ${MPI_MPICH_PREFIX_PATHS}) find_library(MPI_fmpich2s_LIBRARY NAMES fmpich2s HINTS ${MPI_MPICH_PREFIX_PATHS}) find_library(MPI_fmpich2g_LIBRARY NAMES fmpich2g HINTS ${MPI_MPICH_PREFIX_PATHS}) mark_as_advanced(MPI_fmpich2_LIBRARY MPI_fmpich2s_LIBRARY MPI_fmpich2g_LIBRARY) list(APPEND MPI_MPICH_LIB_NAMES "fmpich2") endif() if(NOT MPI_${LANG}_LIB_NAMES) set(MPI_${LANG}_LIB_NAMES "${MPI_MPICH_LIB_NAMES}" CACHE STRING "MPI ${LANG} libraries to link against" FORCE) endif() unset(MPI_MPICH_LIB_NAMES) if(NOT MPI_${LANG}_ADDITIONAL_INCLUDE_DIRS) # For MPICH2, the include folder would be in ../include relative to the library folder. get_filename_component(MPI_MPICH_ROOT_DIR "${MPI_mpi_LIBRARY}" DIRECTORY) get_filename_component(MPI_MPICH_ROOT_DIR "${MPI_MPICH_ROOT_DIR}" DIRECTORY) if(IS_DIRECTORY "${MPI_MPICH_ROOT_DIR}/include") set(MPI_${LANG}_ADDITIONAL_INCLUDE_DIRS "${MPI_MPICH_ROOT_DIR}/include" CACHE STRING "MPI ${LANG} additional include directory variables, given in the form MPI__INCLUDE_DIR." FORCE) endif() unset(MPI_MPICH_ROOT_DIR) endif() set(MPI_GUESS_FOUND TRUE) endif() unset(MPI_MPICH_PREFIX_PATHS) endif() endif() set(MPI_${LANG}_GUESS_FOUND "${MPI_GUESS_FOUND}" PARENT_SCOPE) endfunction() function(_MPI_adjust_compile_definitions LANG) if("${LANG}" STREQUAL "CXX") # To disable the C++ bindings, we need to pass some definitions since the mpi.h header has to deal with both C and C++ # bindings in MPI-2. if(MPI_CXX_SKIP_MPICXX AND NOT MPI_${LANG}_COMPILE_DEFINITIONS MATCHES "SKIP_MPICXX") # MPICH_SKIP_MPICXX is being used in MPICH and derivatives like MVAPICH or Intel MPI # OMPI_SKIP_MPICXX is being used in Open MPI # _MPICC_H is being used for IBM Platform MPI list(APPEND MPI_${LANG}_COMPILE_DEFINITIONS "MPICH_SKIP_MPICXX" "OMPI_SKIP_MPICXX" "_MPICC_H") set(MPI_${LANG}_COMPILE_DEFINITIONS "${MPI_${LANG}_COMPILE_DEFINITIONS}" CACHE STRING "MPI ${LANG} compilation definitions" FORCE) endif() endif() endfunction() macro(_MPI_assemble_libraries LANG) set(MPI_${LANG}_LIBRARIES "") foreach(mpilib IN LISTS MPI_${LANG}_LIB_NAMES) list(APPEND MPI_${LANG}_LIBRARIES ${MPI_${mpilib}_LIBRARY}) endforeach() endmacro() macro(_MPI_assemble_include_dirs LANG) set(MPI_${LANG}_INCLUDE_DIRS "${MPI_${LANG}_ADDITIONAL_INCLUDE_DIRS}") if("${LANG}" MATCHES "(C|CXX)") if(MPI_${LANG}_HEADER_DIR) list(APPEND MPI_${LANG}_INCLUDE_DIRS "${MPI_${LANG}_HEADER_DIR}") endif() else() # Fortran if(MPI_${LANG}_F77_HEADER_DIR) list(APPEND MPI_${LANG}_INCLUDE_DIRS "${MPI_${LANG}_F77_HEADER_DIR}") endif() if(MPI_${LANG}_MODULE_DIR AND NOT "${MPI_${LANG}_MODULE_DIR}" IN_LIST MPI_${LANG}_INCLUDE_DIRS) list(APPEND MPI_${LANG}_INCLUDE_DIRS "${MPI_${LANG}_MODULE_DIR}") endif() endif() if(MPI_${LANG}_ADDITIONAL_INCLUDE_VARS) foreach(mpiadditionalinclude IN LISTS MPI_${LANG}_ADDITIONAL_INCLUDE_VARS) list(APPEND MPI_${LANG}_INCLUDE_DIRS "${MPI_${mpiadditionalinclude}_INCLUDE_DIR}") endforeach() endif() endmacro() function(_MPI_split_include_dirs LANG) # Backwards compatibility: Search INCLUDE_PATH if given. if(MPI_${LANG}_INCLUDE_PATH) list(APPEND MPI_${LANG}_ADDITIONAL_INCLUDE_DIRS "${MPI_${LANG}_INCLUDE_PATH}") endif() # We try to find the headers/modules among those paths (and system paths) # For C/C++, we just need to have a look for mpi.h. if("${LANG}" MATCHES "(C|CXX)") find_path(MPI_${LANG}_HEADER_DIR "mpi.h" HINTS ${MPI_${LANG}_ADDITIONAL_INCLUDE_DIRS} ) mark_as_advanced(MPI_${LANG}_HEADER_DIR) if(MPI_${LANG}_ADDITIONAL_INCLUDE_DIRS) list(REMOVE_ITEM MPI_${LANG}_ADDITIONAL_INCLUDE_DIRS "${MPI_${LANG}_HEADER_DIR}") endif() # Fortran is more complicated here: An implementation could provide # any of the Fortran 77/90/2008 APIs for MPI. For example, MSMPI # only provides Fortran 77 and - if mpi.f90 is built - potentially # a Fortran 90 module. elseif("${LANG}" STREQUAL "Fortran") find_path(MPI_${LANG}_F77_HEADER_DIR "mpif.h" HINTS ${MPI_${LANG}_ADDITIONAL_INCLUDE_DIRS} ) find_path(MPI_${LANG}_MODULE_DIR NAMES "mpi.mod" "mpi_f08.mod" HINTS ${MPI_${LANG}_ADDITIONAL_INCLUDE_DIRS} ) if(MPI_${LANG}_ADDITIONAL_INCLUDE_DIRS) list(REMOVE_ITEM MPI_${LANG}_ADDITIONAL_INCLUDE_DIRS "${MPI_${LANG}_F77_HEADER_DIR}" "${MPI_${LANG}_MODULE_DIR}" ) endif() mark_as_advanced(MPI_${LANG}_F77_HEADER_DIR MPI_${LANG}_MODULE_DIR) endif() set(MPI_${LANG}_ADDITIONAL_INCLUDE_DIRS ${MPI_${LANG}_ADDITIONAL_INCLUDE_DIRS} CACHE STRING "MPI ${LANG} additional include directories" FORCE) endfunction() macro(_MPI_create_imported_target LANG) if(NOT TARGET MPI::MPI_${LANG}) add_library(MPI::MPI_${LANG} INTERFACE IMPORTED) endif() set_property(TARGET MPI::MPI_${LANG} PROPERTY INTERFACE_COMPILE_OPTIONS "${MPI_${LANG}_COMPILE_OPTIONS}") set_property(TARGET MPI::MPI_${LANG} PROPERTY INTERFACE_COMPILE_DEFINITIONS "${MPI_${LANG}_COMPILE_DEFINITIONS}") set_property(TARGET MPI::MPI_${LANG} PROPERTY INTERFACE_LINK_LIBRARIES "") if(MPI_${LANG}_LINK_FLAGS) set_property(TARGET MPI::MPI_${LANG} APPEND PROPERTY INTERFACE_LINK_LIBRARIES "${MPI_${LANG}_LINK_FLAGS}") endif() # If the compiler links MPI implicitly, no libraries will be found as they're contained within # CMAKE__IMPLICIT_LINK_LIBRARIES already. if(MPI_${LANG}_LIBRARIES) set_property(TARGET MPI::MPI_${LANG} APPEND PROPERTY INTERFACE_LINK_LIBRARIES "${MPI_${LANG}_LIBRARIES}") endif() # Given the new design of FindMPI, INCLUDE_DIRS will always be located, even under implicit linking. set_property(TARGET MPI::MPI_${LANG} PROPERTY INTERFACE_INCLUDE_DIRECTORIES "${MPI_${LANG}_INCLUDE_DIRS}") endmacro() function(_MPI_try_staged_settings LANG MPI_TEST_FILE_NAME MODE RUN_BINARY) set(WORK_DIR "${CMAKE_BINARY_DIR}${CMAKE_FILES_DIRECTORY}/FindMPI") set(SRC_DIR "${CMAKE_ROOT}/Modules/FindMPI") set(BIN_FILE "${CMAKE_BINARY_DIR}${CMAKE_FILES_DIRECTORY}/FindMPI/${MPI_TEST_FILE_NAME}_${LANG}.bin") unset(MPI_TEST_COMPILE_DEFINITIONS) if("${LANG}" STREQUAL "Fortran") if("${MODE}" STREQUAL "F90_MODULE") set(MPI_Fortran_INCLUDE_LINE "use mpi\n implicit none") elseif("${MODE}" STREQUAL "F08_MODULE") set(MPI_Fortran_INCLUDE_LINE "use mpi_f08\n implicit none") else() # F77 header set(MPI_Fortran_INCLUDE_LINE "implicit none\n include 'mpif.h'") endif() configure_file("${SRC_DIR}/${MPI_TEST_FILE_NAME}.f90.in" "${WORK_DIR}/${MPI_TEST_FILE_NAME}.f90" @ONLY) set(MPI_TEST_SOURCE_FILE "${WORK_DIR}/${MPI_TEST_FILE_NAME}.f90") elseif("${LANG}" STREQUAL "CXX") configure_file("${SRC_DIR}/${MPI_TEST_FILE_NAME}.c" "${WORK_DIR}/${MPI_TEST_FILE_NAME}.cpp" COPYONLY) set(MPI_TEST_SOURCE_FILE "${WORK_DIR}/${MPI_TEST_FILE_NAME}.cpp") if("${MODE}" STREQUAL "TEST_MPICXX") set(MPI_TEST_COMPILE_DEFINITIONS TEST_MPI_MPICXX) endif() else() # C set(MPI_TEST_SOURCE_FILE "${SRC_DIR}/${MPI_TEST_FILE_NAME}.c") endif() if(RUN_BINARY) try_run(MPI_RUN_RESULT_${LANG}_${MPI_TEST_FILE_NAME}_${MODE} MPI_RESULT_${LANG}_${MPI_TEST_FILE_NAME}_${MODE} "${CMAKE_BINARY_DIR}" SOURCES "${MPI_TEST_SOURCE_FILE}" COMPILE_DEFINITIONS ${MPI_TEST_COMPILE_DEFINITIONS} LINK_LIBRARIES MPI::MPI_${LANG} RUN_OUTPUT_VARIABLE MPI_RUN_OUTPUT_${LANG}_${MPI_TEST_FILE_NAME}_${MODE}) set(MPI_RUN_OUTPUT_${LANG}_${MPI_TEST_FILE_NAME}_${MODE} "${MPI_RUN_OUTPUT_${LANG}_${MPI_TEST_FILE_NAME}_${MODE}}" PARENT_SCOPE) else() try_compile(MPI_RESULT_${LANG}_${MPI_TEST_FILE_NAME}_${MODE} "${CMAKE_BINARY_DIR}" SOURCES "${MPI_TEST_SOURCE_FILE}" COMPILE_DEFINITIONS ${MPI_TEST_COMPILE_DEFINITIONS} LINK_LIBRARIES MPI::MPI_${LANG} COPY_FILE "${BIN_FILE}") endif() endfunction() macro(_MPI_check_lang_works LANG) # For Fortran we may have by the MPI-3 standard an implementation that provides: # - the mpi_f08 module # - *both*, the mpi module and 'mpif.h' # Since older MPI standards (MPI-1) did not define anything but 'mpif.h', we need to check all three individually. if( NOT MPI_${LANG}_WORKS ) if("${LANG}" STREQUAL "Fortran") set(MPI_Fortran_INTEGER_LINE "(kind=MPI_INTEGER_KIND)") _MPI_try_staged_settings(${LANG} test_mpi F77_HEADER FALSE) _MPI_try_staged_settings(${LANG} test_mpi F90_MODULE FALSE) _MPI_try_staged_settings(${LANG} test_mpi F08_MODULE FALSE) set(MPI_${LANG}_WORKS FALSE) foreach(mpimethod IN ITEMS F77_HEADER F08_MODULE F90_MODULE) if(MPI_RESULT_${LANG}_test_mpi_${mpimethod}) set(MPI_${LANG}_WORKS TRUE) set(MPI_${LANG}_HAVE_${mpimethod} TRUE) else() set(MPI_${LANG}_HAVE_${mpimethod} FALSE) endif() endforeach() # MPI-1 versions had no MPI_INTGER_KIND defined, so we need to try without it. # However, MPI-1 also did not define the Fortran 90 and 08 modules, so we only try the F77 header. unset(MPI_Fortran_INTEGER_LINE) if(NOT MPI_${LANG}_WORKS) _MPI_try_staged_settings(${LANG} test_mpi F77_HEADER_NOKIND FALSE) if(MPI_RESULT_${LANG}_test_mpi_F77_HEADER_NOKIND) set(MPI_${LANG}_WORKS TRUE) set(MPI_${LANG}_HAVE_F77_HEADER TRUE) endif() endif() else() _MPI_try_staged_settings(${LANG} test_mpi normal FALSE) # If 'test_mpi' built correctly, we've found valid MPI settings. There might not be MPI-2 C++ support, but there can't # be MPI-2 C++ support without the C bindings being present, so checking for them is sufficient. set(MPI_${LANG}_WORKS "${MPI_RESULT_${LANG}_test_mpi_normal}") endif() endif() endmacro() # Some systems install various MPI implementations in separate folders in some MPI prefix # This macro enumerates all such subfolders and adds them to the list of hints that will be searched. macro(MPI_search_mpi_prefix_folder PREFIX_FOLDER) if(EXISTS "${PREFIX_FOLDER}") file(GLOB _MPI_folder_children RELATIVE "${PREFIX_FOLDER}" "${PREFIX_FOLDER}/*") foreach(_MPI_folder_child IN LISTS _MPI_folder_children) if(IS_DIRECTORY "${PREFIX_FOLDER}/${_MPI_folder_child}") list(APPEND MPI_HINT_DIRS "${PREFIX_FOLDER}/${_MPI_folder_child}") endif() endforeach() endif() endmacro() set(MPI_HINT_DIRS ${MPI_HOME} $ENV{MPI_HOME} $ENV{I_MPI_ROOT}) if("${CMAKE_HOST_SYSTEM_NAME}" STREQUAL "Linux") # SUSE Linux Enterprise Server stores its MPI implementations under /usr/lib64/mpi/gcc/ # We enumerate the subfolders and append each as a prefix MPI_search_mpi_prefix_folder("/usr/lib64/mpi/gcc") elseif("${CMAKE_HOST_SYSTEM_NAME}" STREQUAL "Windows") # MSMPI stores its runtime in a special folder, this adds the possible locations to the hints. list(APPEND MPI_HINT_DIRS $ENV{MSMPI_BIN} "[HKEY_LOCAL_MACHINE\\SOFTWARE\\Microsoft\\MPI;InstallRoot]") elseif("${CMAKE_HOST_SYSTEM_NAME}" STREQUAL "FreeBSD") # FreeBSD ships mpich under the normal system paths - but available openmpi implementations # will be found in /usr/local/mpi/ MPI_search_mpi_prefix_folder("/usr/local/mpi/") endif() # Most MPI distributions have some form of mpiexec or mpirun which gives us something we can look for. # The MPI standard does not mandate the existence of either, but instead only makes requirements if a distribution # ships an mpiexec program (mpirun executables are not regulated by the standard). find_program(MPIEXEC_EXECUTABLE NAMES ${_MPIEXEC_NAMES} PATH_SUFFIXES bin sbin HINTS ${MPI_HINT_DIRS} DOC "Executable for running MPI programs.") # call get_filename_component twice to remove mpiexec and the directory it exists in (typically bin). # This gives us a fairly reliable base directory to search for /bin /lib and /include from. get_filename_component(_MPI_BASE_DIR "${MPIEXEC_EXECUTABLE}" PATH) get_filename_component(_MPI_BASE_DIR "${_MPI_BASE_DIR}" PATH) # According to the MPI standard, section 8.8 -n is a guaranteed, and the only guaranteed way to # launch an MPI process using mpiexec if such a program exists. set(MPIEXEC_NUMPROC_FLAG "-n" CACHE STRING "Flag used by MPI to specify the number of processes for mpiexec; the next option will be the number of processes.") set(MPIEXEC_PREFLAGS "" CACHE STRING "These flags will be directly before the executable that is being run by mpiexec.") set(MPIEXEC_POSTFLAGS "" CACHE STRING "These flags will be placed after all flags passed to mpiexec.") # Set the number of processes to the physical processor count cmake_host_system_information(RESULT _MPIEXEC_NUMPROCS QUERY NUMBER_OF_PHYSICAL_CORES) set(MPIEXEC_MAX_NUMPROCS "${_MPIEXEC_NUMPROCS}" CACHE STRING "Maximum number of processors available to run MPI applications.") unset(_MPIEXEC_NUMPROCS) mark_as_advanced(MPIEXEC_EXECUTABLE MPIEXEC_NUMPROC_FLAG MPIEXEC_PREFLAGS MPIEXEC_POSTFLAGS MPIEXEC_MAX_NUMPROCS) #============================================================================= # Backward compatibility input hacks. Propagate the FindMPI hints to C and # CXX if the respective new versions are not defined. Translate the old # MPI_LIBRARY and MPI_EXTRA_LIBRARY to respective MPI_${LANG}_LIBRARIES. # # Once we find the new variables, we translate them back into their old # equivalents below. foreach (LANG IN ITEMS C CXX) # Old input variables. set(_MPI_OLD_INPUT_VARS COMPILER COMPILE_FLAGS INCLUDE_PATH LINK_FLAGS) # Set new vars based on their old equivalents, if the new versions are not already set. foreach (var ${_MPI_OLD_INPUT_VARS}) if (NOT MPI_${LANG}_${var} AND MPI_${var}) set(MPI_${LANG}_${var} "${MPI_${var}}") endif() endforeach() # Chop the old compile flags into options and definitions if(MPI_${LANG}_COMPILE_FLAGS) unset(MPI_${LANG}_COMPILE_OPTIONS) unset(MPI_${LANG}_COMPILE_DEFINITIONS) separate_arguments(MPI_SEPARATE_FLAGS NATIVE_COMMAND "${MPI_${LANG}_COMPILE_FLAGS}") foreach(_MPI_FLAG IN LISTS MPI_SEPARATE_FLAGS) if("${_MPI_FLAG}" MATCHES "^ *[-/D]([^ ]+)") list(APPEND MPI_${LANG}_COMPILE_DEFINITIONS "${CMAKE_MATCH_1}") else() list(APPEND MPI_${LANG}_COMPILE_FLAGS "${_MPI_FLAG}") endif() endforeach() unset(MPI_SEPARATE_FLAGS) endif() # If a list of libraries was given, we'll split it into new-style cache variables if(NOT MPI_${LANG}_LIB_NAMES) foreach(_MPI_LIB IN LISTS MPI_${LANG}_LIBRARIES MPI_LIBRARY MPI_EXTRA_LIBRARY) get_filename_component(_MPI_PLAIN_LIB_NAME "${_MPI_LIB}" NAME_WE) get_filename_component(_MPI_LIB_NAME "${_MPI_LIB}" NAME) get_filename_component(_MPI_LIB_DIR "${_MPI_LIB}" DIRECTORY) list(APPEND MPI_PLAIN_LIB_NAMES_WORK "${_MPI_PLAIN_LIB_NAME}") find_library(MPI_${_MPI_PLAIN_LIB_NAME}_LIBRARY NAMES "${_MPI_LIB_NAME}" "lib${_MPI_LIB_NAME}" HINTS ${_MPI_LIB_DIR} $ENV{MPI_LIB} DOC "Location of the ${_MPI_PLAIN_LIB_NAME} library for MPI" ) mark_as_advanced(MPI_${_MPI_PLAIN_LIB_NAME}_LIBRARY) endforeach() endif() endforeach() #============================================================================= unset(MPI_VERSION) unset(MPI_VERSION_MAJOR) unset(MPI_VERSION_MINOR) unset(_MPI_MIN_VERSION) # This loop finds the compilers and sends them off for interrogation. foreach(LANG IN ITEMS C CXX Fortran) if(CMAKE_${LANG}_COMPILER_LOADED) if(NOT MPI_FIND_COMPONENTS) set(_MPI_FIND_${LANG} TRUE) elseif( ${LANG} IN_LIST MPI_FIND_COMPONENTS) set(_MPI_FIND_${LANG} TRUE) elseif( ${LANG} STREQUAL CXX AND NOT MPI_CXX_SKIP_MPICXX AND MPICXX IN_LIST MPI_FIND_COMPONENTS ) set(_MPI_FIND_${LANG} TRUE) else() set(_MPI_FIND_${LANG} FALSE) endif() else() set(_MPI_FIND_${LANG} FALSE) endif() if(_MPI_FIND_${LANG}) if( ${LANG} STREQUAL CXX AND NOT MPICXX IN_LIST MPI_FIND_COMPONENTS ) set(MPI_CXX_SKIP_MPICXX FALSE CACHE BOOL "If true, the MPI-2 C++ bindings are disabled using definitions.") mark_as_advanced(MPI_CXX_SKIP_MPICXX) endif() if(NOT (MPI_${LANG}_LIB_NAMES AND (MPI_${LANG}_INCLUDE_PATH OR MPI_${LANG}_INCLUDE_DIRS OR MPI_${LANG}_ADDITIONAL_INCLUDE_DIRS))) if(NOT MPI_${LANG}_COMPILER AND NOT MPI_ASSUME_NO_BUILTIN_MPI) # Should the imported targets be empty, we effectively try whether the compiler supports MPI on its own, which is the case on e.g. # Cray PrgEnv. _MPI_create_imported_target(${LANG}) _MPI_check_lang_works(${LANG}) # If the compiler can build MPI code on its own, it functions as an MPI compiler and we'll set the variable to point to it. if(MPI_${LANG}_WORKS) set(MPI_${LANG}_COMPILER "${CMAKE_${LANG}_COMPILER}" CACHE FILEPATH "MPI compiler for ${LANG}" FORCE) endif() endif() # If the user specified a library name we assume they prefer that library over a wrapper. If not, they can disable skipping manually. if(NOT DEFINED MPI_SKIP_COMPILER_WRAPPER AND MPI_GUESS_LIBRARY_NAME) set(MPI_SKIP_COMPILER_WRAPPER TRUE) endif() if(NOT MPI_SKIP_COMPILER_WRAPPER) if(MPI_${LANG}_COMPILER) # If the user supplies a compiler *name* instead of an absolute path, assume that we need to find THAT compiler. if (NOT IS_ABSOLUTE "${MPI_${LANG}_COMPILER}") # Get rid of our default list of names and just search for the name the user wants. set(_MPI_${LANG}_COMPILER_NAMES "${MPI_${LANG}_COMPILER}") unset(MPI_${LANG}_COMPILER CACHE) endif() # If the user specifies a compiler, we don't want to try to search libraries either. set(MPI_PINNED_COMPILER TRUE) else() set(MPI_PINNED_COMPILER FALSE) endif() # If we have an MPI base directory, we'll try all compiler names in that one first. # This should prevent mixing different MPI environments if(_MPI_BASE_DIR) find_program(MPI_${LANG}_COMPILER NAMES ${_MPI_${LANG}_COMPILER_NAMES} PATH_SUFFIXES bin sbin HINTS ${_MPI_BASE_DIR} NO_DEFAULT_PATH DOC "MPI compiler for ${LANG}" ) endif() # If the base directory did not help (for example because the mpiexec isn't in the same directory as the compilers), # we shall try searching in the default paths. find_program(MPI_${LANG}_COMPILER NAMES ${_MPI_${LANG}_COMPILER_NAMES} PATH_SUFFIXES bin sbin DOC "MPI compiler for ${LANG}" ) if(MPI_${LANG}_COMPILER STREQUAL CMAKE_${LANG}_COMPILER) set(MPI_SKIP_GUESSING TRUE) elseif(MPI_${LANG}_COMPILER) _MPI_interrogate_compiler(${LANG}) else() set(MPI_${LANG}_WRAPPER_FOUND FALSE) endif() else() set(MPI_${LANG}_WRAPPER_FOUND FALSE) set(MPI_PINNED_COMPILER FALSE) endif() if(NOT MPI_${LANG}_WRAPPER_FOUND AND NOT MPI_PINNED_COMPILER) # For C++, we may use the settings for C. Should a given compiler wrapper for C++ not exist, but one for C does, we copy over the # settings for C. An MPI distribution that is in this situation would be IBM Platform MPI. if("${LANG}" STREQUAL "CXX" AND MPI_C_WRAPPER_FOUND) set(MPI_${LANG}_COMPILE_OPTIONS ${MPI_C_COMPILE_OPTIONS} CACHE STRING "MPI ${LANG} compilation options" ) set(MPI_${LANG}_COMPILE_DEFINITIONS ${MPI_C_COMPILE_DEFINITIONS} CACHE STRING "MPI ${LANG} compilation definitions" ) set(MPI_${LANG}_ADDITIONAL_INCLUDE_DIRS ${MPI_C_INCLUDE_DIRS} CACHE STRING "MPI ${LANG} additional include directories") set(MPI_${LANG}_LINK_FLAGS ${MPI_C_LINK_FLAGS} CACHE STRING "MPI ${LANG} linker flags" ) set(MPI_${LANG}_LIB_NAMES ${MPI_C_LIB_NAMES} CACHE STRING "MPI ${LANG} libraries to link against" ) set(MPI_${LANG}_WRAPPER_FOUND TRUE) elseif(NOT MPI_SKIP_GUESSING) _MPI_guess_settings(${LANG}) endif() endif() endif() _MPI_split_include_dirs(${LANG}) if(NOT MPI_${LANG}_COMPILER STREQUAL CMAKE_${LANG}_COMPILER) _MPI_assemble_include_dirs(${LANG}) _MPI_assemble_libraries(${LANG}) endif() _MPI_adjust_compile_definitions(${LANG}) # We always create imported targets even if they're empty _MPI_create_imported_target(${LANG}) if(NOT MPI_${LANG}_WORKS) _MPI_check_lang_works(${LANG}) endif() # Next, we'll initialize the MPI variables that have not been previously set. set(MPI_${LANG}_COMPILE_OPTIONS "" CACHE STRING "MPI ${LANG} compilation flags" ) set(MPI_${LANG}_COMPILE_DEFINITIONS "" CACHE STRING "MPI ${LANG} compilation definitions" ) set(MPI_${LANG}_ADDITIONAL_INCLUDE_DIRS "" CACHE STRING "MPI ${LANG} additional include directories") set(MPI_${LANG}_LINK_FLAGS "" CACHE STRING "MPI ${LANG} linker flags" ) set(MPI_${LANG}_LIB_NAMES "" CACHE STRING "MPI ${LANG} libraries to link against" ) mark_as_advanced(MPI_${LANG}_COMPILE_OPTIONS MPI_${LANG}_COMPILE_DEFINITIONS MPI_${LANG}_LINK_FLAGS MPI_${LANG}_LIB_NAMES MPI_${LANG}_ADDITIONAL_INCLUDE_DIRS MPI_${LANG}_COMPILER) # If we've found MPI, then we'll perform additional analysis: Determine the MPI version, MPI library version, supported # MPI APIs (i.e. MPI-2 C++ bindings). For Fortran we also need to find specific parameters if we're under MPI-3. if(MPI_${LANG}_WORKS) if("${LANG}" STREQUAL "CXX" AND NOT DEFINED MPI_MPICXX_FOUND) if(NOT MPI_CXX_SKIP_MPICXX AND NOT MPI_CXX_VALIDATE_SKIP_MPICXX) _MPI_try_staged_settings(${LANG} test_mpi MPICXX FALSE) if(MPI_RESULT_${LANG}_test_mpi_MPICXX) set(MPI_MPICXX_FOUND TRUE) else() set(MPI_MPICXX_FOUND FALSE) endif() else() set(MPI_MPICXX_FOUND FALSE) endif() endif() # At this point, we know the bindings present but not the MPI version or anything else. if(NOT DEFINED MPI_${LANG}_VERSION) unset(MPI_${LANG}_VERSION_MAJOR) unset(MPI_${LANG}_VERSION_MINOR) endif() set(MPI_BIN_FOLDER ${CMAKE_BINARY_DIR}${CMAKE_FILES_DIRECTORY}/FindMPI) # For Fortran, we'll want to use the most modern MPI binding to test capabilities other than the # Fortran parameters, since those depend on the method of consumption. # For C++, we can always use the C bindings, and should do so, since the C++ bindings do not exist in MPI-3 # whereas the C bindings do, and the C++ bindings never offered any feature advantage over their C counterparts. if("${LANG}" STREQUAL "Fortran") if(MPI_${LANG}_HAVE_F08_MODULE) set(MPI_${LANG}_HIGHEST_METHOD F08_MODULE) elseif(MPI_${LANG}_HAVE_F90_MODULE) set(MPI_${LANG}_HIGHEST_METHOD F90_MODULE) else() set(MPI_${LANG}_HIGHEST_METHOD F77_HEADER) endif() # Another difference between C and Fortran is that we can't use the preprocessor to determine whether MPI_VERSION # and MPI_SUBVERSION are provided. These defines did not exist in MPI 1.0 and 1.1 and therefore might not # exist. For C/C++, test_mpi.c will handle the MPI_VERSION extraction, but for Fortran, we need mpiver.f90. if(NOT DEFINED MPI_${LANG}_VERSION) _MPI_try_staged_settings(${LANG} mpiver ${MPI_${LANG}_HIGHEST_METHOD} FALSE) if(MPI_RESULT_${LANG}_mpiver_${MPI_${LANG}_HIGHEST_METHOD}) file(STRINGS ${MPI_BIN_FOLDER}/mpiver_${LANG}.bin _MPI_VERSION_STRING LIMIT_COUNT 1 REGEX "INFO:MPI-VER") if("${_MPI_VERSION_STRING}" MATCHES ".*INFO:MPI-VER\\[([0-9]+)\\.([0-9]+)\\].*") set(MPI_${LANG}_VERSION_MAJOR "${CMAKE_MATCH_1}") set(MPI_${LANG}_VERSION_MINOR "${CMAKE_MATCH_2}") set(MPI_${LANG}_VERSION "${MPI_${LANG}_VERSION_MAJOR}.${MPI_${LANG}_VERSION_MINOR}") endif() endif() endif() # Finally, we want to find out which capabilities a given interface supports, compare the MPI-3 standard. # This is determined by interface specific parameters MPI_SUBARRAYS_SUPPORTED and MPI_ASYNC_PROTECTS_NONBLOCKING # and might vary between the different methods of consumption. if(MPI_DETERMINE_Fortran_CAPABILITIES AND NOT MPI_Fortran_CAPABILITIES_DETERMINED) foreach(mpimethod IN ITEMS F08_MODULE F90_MODULE F77_HEADER) if(MPI_${LANG}_HAVE_${mpimethod}) set(MPI_${LANG}_${mpimethod}_SUBARRAYS FALSE) set(MPI_${LANG}_${mpimethod}_ASYNCPROT FALSE) _MPI_try_staged_settings(${LANG} fortranparam_mpi ${mpimethod} TRUE) if(MPI_RESULT_${LANG}_fortranparam_mpi_${mpimethod} AND NOT "${MPI_RUN_RESULT_${LANG}_fortranparam_mpi_${mpimethod}}" STREQUAL "FAILED_TO_RUN") if("${MPI_RUN_OUTPUT_${LANG}_fortranparam_mpi_${mpimethod}}" MATCHES ".*INFO:SUBARRAYS\\[ *([TF]) *\\]-ASYNCPROT\\[ *([TF]) *\\].*") if("${CMAKE_MATCH_1}" STREQUAL "T") set(MPI_${LANG}_${mpimethod}_SUBARRAYS TRUE) endif() if("${CMAKE_MATCH_2}" STREQUAL "T") set(MPI_${LANG}_${mpimethod}_ASYNCPROT TRUE) endif() endif() endif() endif() endforeach() set(MPI_Fortran_CAPABILITIES_DETERMINED TRUE) endif() else() set(MPI_${LANG}_HIGHEST_METHOD normal) # By the MPI-2 standard, MPI_VERSION and MPI_SUBVERSION are valid for both C and C++ bindings. if(NOT DEFINED MPI_${LANG}_VERSION) file(STRINGS ${MPI_BIN_FOLDER}/test_mpi_${LANG}.bin _MPI_VERSION_STRING LIMIT_COUNT 1 REGEX "INFO:MPI-VER") if("${_MPI_VERSION_STRING}" MATCHES ".*INFO:MPI-VER\\[([0-9]+)\\.([0-9]+)\\].*") set(MPI_${LANG}_VERSION_MAJOR "${CMAKE_MATCH_1}") set(MPI_${LANG}_VERSION_MINOR "${CMAKE_MATCH_2}") set(MPI_${LANG}_VERSION "${MPI_${LANG}_VERSION_MAJOR}.${MPI_${LANG}_VERSION_MINOR}") endif() endif() endif() unset(MPI_BIN_FOLDER) # At this point, we have dealt with determining the MPI version and parameters for each Fortran method available. # The one remaining issue is to determine which MPI library is installed. # Determining the version and vendor of the MPI library is only possible via MPI_Get_library_version() at runtime, # and therefore we cannot do this while cross-compiling (a user may still define MPI__LIBRARY_VERSION_STRING # themselves and we'll attempt splitting it, which is equivalent to provide the try_run output). # It's also worth noting that the installed version string can depend on the language, or on the system the binary # runs on if MPI is not statically linked. if(MPI_DETERMINE_LIBRARY_VERSION AND NOT MPI_${LANG}_LIBRARY_VERSION_STRING) _MPI_try_staged_settings(${LANG} libver_mpi ${MPI_${LANG}_HIGHEST_METHOD} TRUE) if(MPI_RESULT_${LANG}_libver_mpi_${MPI_${LANG}_HIGHEST_METHOD} AND "${MPI_RUN_RESULT_${LANG}_libver_mpi_${MPI_${LANG}_HIGHEST_METHOD}}" EQUAL "0") string(STRIP "${MPI_RUN_OUTPUT_${LANG}_libver_mpi_${MPI_${LANG}_HIGHEST_METHOD}}" MPI_${LANG}_LIBRARY_VERSION_STRING) else() set(MPI_${LANG}_LIBRARY_VERSION_STRING "NOTFOUND") endif() endif() endif() set(MPI_${LANG}_FIND_QUIETLY ${MPI_FIND_QUIETLY}) set(MPI_${LANG}_FIND_VERSION ${MPI_FIND_VERSION}) set(MPI_${LANG}_FIND_VERSION_EXACT ${MPI_FIND_VERSION_EXACT}) unset(MPI_${LANG}_REQUIRED_VARS) if (MPI_${LANG}_WRAPPER_FOUND OR MPI_${LANG}_GUESS_FOUND) foreach(mpilibname IN LISTS MPI_${LANG}_LIB_NAMES) list(APPEND MPI_${LANG}_REQUIRED_VARS "MPI_${mpilibname}_LIBRARY") endforeach() list(APPEND MPI_${LANG}_REQUIRED_VARS "MPI_${LANG}_LIB_NAMES") if("${LANG}" STREQUAL "Fortran") # For Fortran we only need one of the module or header directories to have *some* support for MPI. if(NOT MPI_${LANG}_MODULE_DIR) list(APPEND MPI_${LANG}_REQUIRED_VARS "MPI_${LANG}_F77_HEADER_DIR") endif() if(NOT MPI_${LANG}_F77_HEADER_DIR) list(APPEND MPI_${LANG}_REQUIRED_VARS "MPI_${LANG}_MODULE_DIR") endif() else() list(APPEND MPI_${LANG}_REQUIRED_VARS "MPI_${LANG}_HEADER_DIR") endif() if(MPI_${LANG}_ADDITIONAL_INCLUDE_VARS) foreach(mpiincvar IN LISTS MPI_${LANG}_ADDITIONAL_INCLUDE_VARS) list(APPEND MPI_${LANG}_REQUIRED_VARS "MPI_${mpiincvar}_INCLUDE_DIR") endforeach() endif() # Append the works variable now. If the settings did not work, this will show up properly. list(APPEND MPI_${LANG}_REQUIRED_VARS "MPI_${LANG}_WORKS") else() # If the compiler worked implicitly, use its path as output. # Should the compiler variable be set, we also require it to work. list(APPEND MPI_${LANG}_REQUIRED_VARS "MPI_${LANG}_COMPILER") if(MPI_${LANG}_COMPILER) list(APPEND MPI_${LANG}_REQUIRED_VARS "MPI_${LANG}_WORKS") endif() endif() find_package_handle_standard_args(MPI_${LANG} REQUIRED_VARS ${MPI_${LANG}_REQUIRED_VARS} VERSION_VAR MPI_${LANG}_VERSION) if(DEFINED MPI_${LANG}_VERSION) if(NOT _MPI_MIN_VERSION OR _MPI_MIN_VERSION VERSION_GREATER MPI_${LANG}_VERSION) set(_MPI_MIN_VERSION MPI_${LANG}_VERSION) endif() endif() endif() endforeach() unset(_MPI_REQ_VARS) foreach(LANG IN ITEMS C CXX Fortran) if((NOT MPI_FIND_COMPONENTS AND CMAKE_${LANG}_COMPILER_LOADED) OR LANG IN_LIST MPI_FIND_COMPONENTS) list(APPEND _MPI_REQ_VARS "MPI_${LANG}_FOUND") endif() endforeach() if(MPICXX IN_LIST MPI_FIND_COMPONENTS) list(APPEND _MPI_REQ_VARS "MPI_MPICXX_FOUND") endif() find_package_handle_standard_args(MPI REQUIRED_VARS ${_MPI_REQ_VARS} VERSION_VAR ${_MPI_MIN_VERSION} HANDLE_COMPONENTS) #============================================================================= # More backward compatibility stuff # For compatibility reasons, we also define MPIEXEC set(MPIEXEC "${MPIEXEC_EXECUTABLE}") # Copy over MPI__INCLUDE_PATH from the assembled INCLUDE_DIRS. foreach(LANG IN ITEMS C CXX Fortran) if(MPI_${LANG}_FOUND) set(MPI_${LANG}_INCLUDE_PATH "${MPI_${LANG}_INCLUDE_DIRS}") unset(MPI_${LANG}_COMPILE_FLAGS) if(MPI_${LANG}_COMPILE_OPTIONS) set(MPI_${LANG}_COMPILE_FLAGS "${MPI_${LANG}_COMPILE_OPTIONS}") endif() if(MPI_${LANG}_COMPILE_DEFINITIONS) foreach(_MPI_DEF IN LISTS MPI_${LANG}_COMPILE_DEFINITIONS) string(APPEND MPI_${LANG}_COMPILE_FLAGS " -D${_MPI_DEF}") endforeach() endif() endif() endforeach() # Bare MPI sans ${LANG} vars are set to CXX then C, depending on what was found. # This mimics the behavior of the old language-oblivious FindMPI. set(_MPI_OLD_VARS COMPILER INCLUDE_PATH COMPILE_FLAGS LINK_FLAGS LIBRARIES) if (MPI_CXX_FOUND) foreach (var ${_MPI_OLD_VARS}) set(MPI_${var} ${MPI_CXX_${var}}) endforeach() elseif (MPI_C_FOUND) foreach (var ${_MPI_OLD_VARS}) set(MPI_${var} ${MPI_C_${var}}) endforeach() endif() # Chop MPI_LIBRARIES into the old-style MPI_LIBRARY and MPI_EXTRA_LIBRARY, and set them in cache. if (MPI_LIBRARIES) list(GET MPI_LIBRARIES 0 MPI_LIBRARY_WORK) set(MPI_LIBRARY "${MPI_LIBRARY_WORK}") unset(MPI_LIBRARY_WORK) else() set(MPI_LIBRARY "MPI_LIBRARY-NOTFOUND") endif() list(LENGTH MPI_LIBRARIES MPI_NUMLIBS) if (MPI_NUMLIBS GREATER 1) set(MPI_EXTRA_LIBRARY_WORK "${MPI_LIBRARIES}") list(REMOVE_AT MPI_EXTRA_LIBRARY_WORK 0) set(MPI_EXTRA_LIBRARY "${MPI_EXTRA_LIBRARY_WORK}") unset(MPI_EXTRA_LIBRARY_WORK) else() set(MPI_EXTRA_LIBRARY "MPI_EXTRA_LIBRARY-NOTFOUND") endif() #============================================================================= # unset these vars to cleanup namespace unset(_MPI_OLD_VARS) unset(_MPI_PREFIX_PATH) unset(_MPI_BASE_DIR) foreach (lang C CXX Fortran) unset(_MPI_${LANG}_COMPILER_NAMES) endforeach() cmake_policy(POP)