/*============================================================================ CMake - Cross Platform Makefile Generator Copyright 2000-2009 Kitware, Inc., Insight Software Consortium Distributed under the OSI-approved BSD License (the "License"); see accompanying file Copyright.txt for details. This software is distributed WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the License for more information. ============================================================================*/ #ifndef cmInstallCommand_h #define cmInstallCommand_h #include "cmCommand.h" /** \class cmInstallCommand * \brief Specifies where to install some files * * cmInstallCommand is a general-purpose interface command for * specifying install rules. */ class cmInstallCommand : public cmCommand { public: /** * This is a virtual constructor for the command. */ virtual cmCommand* Clone() { return new cmInstallCommand; } /** * This is called when the command is first encountered in * the CMakeLists.txt file. */ virtual bool InitialPass(std::vector const& args, cmExecutionStatus &status); /** * The name of the command as specified in CMakeList.txt. */ virtual const char* GetName() const { return "install";} /** * Succinct documentation. */ virtual const char* GetTerseDocumentation() const { return "Specify rules to run at install time."; } /** * More documentation. */ virtual const char* GetFullDocumentation() const { return "This command generates installation rules for a project. " "Rules specified by calls to this command within a source directory " "are executed in order during installation. " "The order across directories is not defined." "\n" "There are multiple signatures for this command. Some of them define " "installation properties for files and targets. Properties common to " "multiple signatures are covered here but they are valid only for " "signatures that specify them.\n" "DESTINATION arguments specify " "the directory on disk to which a file will be installed. " "If a full path (with a leading slash or drive letter) is given it " "is used directly. If a relative path is given it is interpreted " "relative to the value of CMAKE_INSTALL_PREFIX. The prefix can " "be relocated at install time using DESTDIR mechanism explained in the " "CMAKE_INSTALL_PREFIX variable documentation.\n" "PERMISSIONS arguments specify permissions for installed files. " "Valid permissions are " "OWNER_READ, OWNER_WRITE, OWNER_EXECUTE, " "GROUP_READ, GROUP_WRITE, GROUP_EXECUTE, " "WORLD_READ, WORLD_WRITE, WORLD_EXECUTE, " "SETUID, and SETGID. " "Permissions that do not make sense on certain platforms are ignored " "on those platforms.\n" "The CONFIGURATIONS argument specifies a list of build configurations " "for which the install rule applies (Debug, Release, etc.).\n" "The COMPONENT argument specifies an installation component name " "with which the install rule is associated, such as \"runtime\" or " "\"development\". During component-specific installation only " "install rules associated with the given component name will be " "executed. During a full installation all components are installed." " If COMPONENT is not provided a default component \"Unspecified\" is" " created. The default component name may be controlled with the " "CMAKE_INSTALL_DEFAULT_COMPONENT_NAME variable.\n" "The RENAME argument specifies a name for an installed file that " "may be different from the original file. Renaming is allowed only " "when a single file is installed by the command.\n" "The OPTIONAL argument specifies that it is not an error if the " "file to be installed does not exist. " "\n" "The TARGETS signature:\n" " install(TARGETS targets... [EXPORT ]\n" " [[ARCHIVE|LIBRARY|RUNTIME|FRAMEWORK|BUNDLE|\n" " PRIVATE_HEADER|PUBLIC_HEADER|RESOURCE]\n" " [DESTINATION ]\n" " [PERMISSIONS permissions...]\n" " [CONFIGURATIONS [Debug|Release|...]]\n" " [COMPONENT ]\n" " [OPTIONAL] [NAMELINK_ONLY|NAMELINK_SKIP]\n" " ] [...])\n" "The TARGETS form specifies rules for installing targets from a " "project. There are five kinds of target files that may be " "installed: ARCHIVE, LIBRARY, RUNTIME, FRAMEWORK, and BUNDLE. " "Executables are treated as RUNTIME targets, except that those " "marked with the MACOSX_BUNDLE property are treated as BUNDLE " "targets on OS X. " "Static libraries are always treated as ARCHIVE targets. " "Module libraries are always treated as LIBRARY targets. " "For non-DLL platforms shared libraries are treated as LIBRARY " "targets, except that those marked with the FRAMEWORK property " "are treated as FRAMEWORK targets on OS X. " "For DLL platforms the DLL part of a shared library is treated as " "a RUNTIME target and the corresponding import library is treated as " "an ARCHIVE target. " "All Windows-based systems including Cygwin are DLL platforms. " "The ARCHIVE, LIBRARY, RUNTIME, and FRAMEWORK " "arguments change the type of target to which the subsequent " "properties " "apply. If none is given the installation properties apply to " "all target types. If only one is given then only targets of that " "type will be installed (which can be used to install just a DLL or " "just an import library)." "\n" "The PRIVATE_HEADER, PUBLIC_HEADER, and RESOURCE arguments cause " "subsequent properties to be applied to installing a FRAMEWORK " "shared library target's associated files on non-Apple platforms. " "Rules defined by these arguments are ignored on Apple platforms " "because the associated files are installed into the appropriate " "locations inside the framework folder. " "See documentation of the PRIVATE_HEADER, PUBLIC_HEADER, and RESOURCE " "target properties for details." "\n" "Either NAMELINK_ONLY or NAMELINK_SKIP may be specified as a LIBRARY " "option. " "On some platforms a versioned shared library has a symbolic link " "such as\n" " lib.so -> lib.so.1\n" "where \"lib.so.1\" is the soname of the library and " "\"lib.so\" is a \"namelink\" allowing linkers to find the " "library when given \"-l\". " "The NAMELINK_ONLY option causes installation of only the namelink " "when a library target is installed. " "The NAMELINK_SKIP option causes installation of library files other " "than the namelink when a library target is installed. " "When neither option is given both portions are installed. " "On platforms where versioned shared libraries do not have namelinks " "or when a library is not versioned the NAMELINK_SKIP option installs " "the library and the NAMELINK_ONLY option installs nothing. " "See the VERSION and SOVERSION target properties for details on " "creating versioned shared libraries." "\n" "One or more groups of properties may be specified in a single call " "to the TARGETS form of this command. A target may be installed more " "than once to different locations. Consider hypothetical " "targets \"myExe\", \"mySharedLib\", and \"myStaticLib\". The code\n" " install(TARGETS myExe mySharedLib myStaticLib\n" " RUNTIME DESTINATION bin\n" " LIBRARY DESTINATION lib\n" " ARCHIVE DESTINATION lib/static)\n" " install(TARGETS mySharedLib DESTINATION /some/full/path)\n" "will install myExe to /bin and myStaticLib to " "/lib/static. " "On non-DLL platforms mySharedLib will be installed to /lib " "and /some/full/path. On DLL platforms the mySharedLib DLL will be " "installed to /bin and /some/full/path and its import library " "will be installed to /lib/static and /some/full/path." "\n" "The EXPORT option associates the installed target files with an " "export called . " "It must appear before any RUNTIME, LIBRARY, or ARCHIVE options. " "To actually install the export file itself, call install(EXPORT). " "See documentation of the install(EXPORT ...) signature below for " "details." "\n" "Installing a target with EXCLUDE_FROM_ALL set to true has " "undefined behavior." "\n" "The FILES signature:\n" " install(FILES files... DESTINATION \n" " [PERMISSIONS permissions...]\n" " [CONFIGURATIONS [Debug|Release|...]]\n" " [COMPONENT ]\n" " [RENAME ] [OPTIONAL])\n" "The FILES form specifies rules for installing files for a " "project. File names given as relative paths are interpreted with " "respect to the current source directory. Files installed by this " "form are by default given permissions OWNER_WRITE, OWNER_READ, " "GROUP_READ, and WORLD_READ if no PERMISSIONS argument is given." "\n" "The PROGRAMS signature:\n" " install(PROGRAMS files... DESTINATION \n" " [PERMISSIONS permissions...]\n" " [CONFIGURATIONS [Debug|Release|...]]\n" " [COMPONENT ]\n" " [RENAME ] [OPTIONAL])\n" "The PROGRAMS form is identical to the FILES form except that the " "default permissions for the installed file also include " "OWNER_EXECUTE, GROUP_EXECUTE, and WORLD_EXECUTE. " "This form is intended to install programs that are not targets, " "such as shell scripts. Use the TARGETS form to install targets " "built within the project." "\n" "The DIRECTORY signature:\n" " install(DIRECTORY dirs... DESTINATION \n" " [FILE_PERMISSIONS permissions...]\n" " [DIRECTORY_PERMISSIONS permissions...]\n" " [USE_SOURCE_PERMISSIONS] [OPTIONAL]\n" " [CONFIGURATIONS [Debug|Release|...]]\n" " [COMPONENT ] [FILES_MATCHING]\n" " [[PATTERN | REGEX ]\n" " [EXCLUDE] [PERMISSIONS permissions...]] [...])\n" "The DIRECTORY form installs contents of one or more directories " "to a given destination. " "The directory structure is copied verbatim to the destination. " "The last component of each directory name is appended to the " "destination directory but a trailing slash may be used to " "avoid this because it leaves the last component empty. " "Directory names given as relative paths are interpreted with " "respect to the current source directory. " "If no input directory names are given the destination directory " "will be created but nothing will be installed into it. " "The FILE_PERMISSIONS and DIRECTORY_PERMISSIONS options specify " "permissions given to files and directories in the destination. " "If USE_SOURCE_PERMISSIONS is specified and FILE_PERMISSIONS is not, " "file permissions will be copied from the source directory structure. " "If no permissions are specified files will be given the default " "permissions specified in the FILES form of the command, and the " "directories will be given the default permissions specified in the " "PROGRAMS form of the command.\n" "Installation of directories may be controlled with fine granularity " "using the PATTERN or REGEX options. These \"match\" options specify a " "globbing pattern or regular expression to match directories or files " "encountered within input directories. They may be used to apply " "certain options (see below) to a subset of the files and directories " "encountered. " "The full path to each input file or directory " "(with forward slashes) is matched against the expression. " "A PATTERN will match only complete file names: the portion of the " "full path matching the pattern must occur at the end of the file name " "and be preceded by a slash. " "A REGEX will match any portion of the full path but it may use " "'/' and '$' to simulate the PATTERN behavior. " "By default all files and directories are installed whether " "or not they are matched. " "The FILES_MATCHING option may be given before the first match option " "to disable installation of files (but not directories) not matched by " "any expression. For example, the code\n" " install(DIRECTORY src/ DESTINATION include/myproj\n" " FILES_MATCHING PATTERN \"*.h\")\n" "will extract and install header files from a source tree.\n" "Some options may follow a PATTERN or REGEX expression and are " "applied only to files or directories matching them. " "The EXCLUDE option will skip the matched file or directory. " "The PERMISSIONS option overrides the permissions setting for the " "matched file or directory. " "For example the code\n" " install(DIRECTORY icons scripts/ DESTINATION share/myproj\n" " PATTERN \"CVS\" EXCLUDE\n" " PATTERN \"scripts/*\"\n" " PERMISSIONS OWNER_EXECUTE OWNER_WRITE OWNER_READ\n" " GROUP_EXECUTE GROUP_READ)\n" "will install the icons directory to share/myproj/icons and the " "scripts directory to share/myproj. The icons will get default file " "permissions, the scripts will be given specific permissions, and " "any CVS directories will be excluded." "\n" "The SCRIPT and CODE signature:\n" " install([[SCRIPT ] [CODE ]] [...])\n" "The SCRIPT form will invoke the given CMake script files during " "installation. If the script file name is a relative path " "it will be interpreted with respect to the current source directory. " "The CODE form will invoke the given CMake code during installation. " "Code is specified as a single argument inside a double-quoted string. " "For example, the code\n" " install(CODE \"MESSAGE(\\\"Sample install message.\\\")\")\n" "will print a message during installation.\n" "" "The EXPORT signature:\n" " install(EXPORT DESTINATION \n" " [NAMESPACE ] [FILE .cmake]\n" " [PERMISSIONS permissions...]\n" " [CONFIGURATIONS [Debug|Release|...]]\n" " [EXPORT_LINK_INTERFACE_LIBRARIES]\n" " [COMPONENT ])\n" "The EXPORT form generates and installs a CMake file containing code " "to import targets from the installation tree into another project. " "Target installations are associated with the export " "using the EXPORT option of the install(TARGETS ...) signature " "documented above. The NAMESPACE option will prepend to " "the target names as they are written to the import file. " "By default the generated file will be called .cmake but " "the FILE option may be used to specify a different name. The value " "given to the FILE option must be a file name with the \".cmake\" " "extension. " "If a CONFIGURATIONS option is given then the file will only be " "installed when one of the named configurations is installed. " "Additionally, the generated import file will reference only the " "matching target configurations. " "The EXPORT_LINK_INTERFACE_LIBRARIES keyword, if present, causes the " "contents of the properties matching " "(IMPORTED_)?LINK_INTERFACE_LIBRARIES(_)? to be exported, when " "policy CMP0022 is NEW. " "If a COMPONENT option is specified that does not match that given " "to the targets associated with the behavior is " "undefined. " "If a library target is included in the export but " "a target to which it links is not included the behavior is " "unspecified." "\n" "The EXPORT form is useful to help outside projects use targets built " "and installed by the current project. For example, the code\n" " install(TARGETS myexe EXPORT myproj DESTINATION bin)\n" " install(EXPORT myproj NAMESPACE mp_ DESTINATION lib/myproj)\n" "will install the executable myexe to /bin and code to import " "it in the file \"/lib/myproj/myproj.cmake\". " "An outside project may load this file with the include command " "and reference the myexe executable from the installation tree using " "the imported target name mp_myexe as if the target were built " "in its own tree." "\n" "NOTE: This command supercedes the INSTALL_TARGETS command and the " "target properties PRE_INSTALL_SCRIPT and POST_INSTALL_SCRIPT. " "It also replaces the FILES forms of the INSTALL_FILES and " "INSTALL_PROGRAMS commands. " "The processing order of these install rules relative to those " "generated by INSTALL_TARGETS, INSTALL_FILES, and INSTALL_PROGRAMS " "commands is not defined.\n" ; } cmTypeMacro(cmInstallCommand, cmCommand); private: bool HandleScriptMode(std::vector const& args); bool HandleTargetsMode(std::vector const& args); bool HandleFilesMode(std::vector const& args); bool HandleDirectoryMode(std::vector const& args); bool HandleExportMode(std::vector const& args); bool MakeFilesFullPath(const char* modeName, const std::vector& relFiles, std::vector& absFiles); bool CheckCMP0006(bool& failure); std::string DefaultComponentName; }; #endif