path: root/Modules/FindQt4.cmake

# - Find QT 4
# This module can be used to find Qt4.
# The most important issue is that the Qt4 qmake is available via the system path.
# This qmake is then used to detect basically everything else.
# This module defines a number of key variables and macros. 
# The variable QT_USE_FILE is set which is the path to a CMake file that can be included 
# to compile Qt 4 applications and libraries.  It sets up the compilation
# environment for include directories, preprocessor defines and populates a
# QT_LIBRARIES variable.
#
# Typical usage could be something like:
#   find_package(Qt4 4.4.3 COMPONENTS QtCore QtGui QtXml REQUIRED )
#   include(${QT_USE_FILE})
#   add_executable(myexe main.cpp)
#   target_link_libraries(myexe ${QT_LIBRARIES})
#
# The minimum required version can be specified using the standard find_package()-syntax
# (see example above). 
# For compatibility with older versions of FindQt4.cmake it is also possible to
# set the variable QT_MIN_VERSION to the minimum required version of Qt4 before the 
# find_package(Qt4) command. 
# If both are used, the version used in the find_package() command overrides the
# one from QT_MIN_VERSION.
#
# When using the components argument, QT_USE_QT* variables are automatically set
# for the QT_USE_FILE to pick up.  If one wishes to manually set them, the
# available ones to set include:
#                    QT_DONT_USE_QTCORE
#                    QT_DONT_USE_QTGUI
#                    QT_USE_QT3SUPPORT
#                    QT_USE_QTASSISTANT
#                    QT_USE_QAXCONTAINER
#                    QT_USE_QAXSERVER
#                    QT_USE_QTDESIGNER
#                    QT_USE_QTMOTIF
#                    QT_USE_QTMAIN
#                    QT_USE_QTNETWORK
#                    QT_USE_QTNSPLUGIN
#                    QT_USE_QTOPENGL
#                    QT_USE_QTSQL
#                    QT_USE_QTXML
#                    QT_USE_QTSVG
#                    QT_USE_QTTEST
#                    QT_USE_QTUITOOLS
#                    QT_USE_QTDBUS
#                    QT_USE_QTSCRIPT
#                    QT_USE_QTASSISTANTCLIENT
#                    QT_USE_QTHELP
#                    QT_USE_QTWEBKIT
#                    QT_USE_QTXMLPATTERNS
#                    QT_USE_PHONON
#                    QT_USE_QTSCRIPTTOOLS
#
# There are also some files that need processing by some Qt tools such as moc
# and uic.  Listed below are macros that may be used to process those files.
#  
#  macro QT4_WRAP_CPP(outfiles inputfile ... OPTIONS ...)
#        create moc code from a list of files containing Qt class with
#        the Q_OBJECT declaration.  Per-direcotry preprocessor definitions 
#        are also added.  Options may be given to moc, such as those found
#        when executing "moc -help".  
#
#  macro QT4_WRAP_UI(outfiles inputfile ... OPTIONS ...)
#        create code from a list of Qt designer ui files.
#        Options may be given to uic, such as those found
#        when executing "uic -help"
#
#  macro QT4_ADD_RESOURCES(outfiles inputfile ... OPTIONS ...)
#        create code from a list of Qt resource files.
#        Options may be given to rcc, such as those found
#        when executing "rcc -help"
#
#  macro QT4_GENERATE_MOC(inputfile outputfile )
#        creates a rule to run moc on infile and create outfile.
#        Use this if for some reason QT4_WRAP_CPP() isn't appropriate, e.g.
#        because you need a custom filename for the moc file or something similar.
#
#  macro QT4_AUTOMOC(sourcefile1 sourcefile2 ... )
#        This macro is still experimental.
#        It can be used to have moc automatically handled.
#        So if you have the files foo.h and foo.cpp, and in foo.h a 
#        a class uses the Q_OBJECT macro, moc has to run on it. If you don't
#        want to use QT4_WRAP_CPP() (which is reliable and mature), you can insert
#        #include "foo.moc"
#        in foo.cpp and then give foo.cpp as argument to QT4_AUTOMOC(). This will the
#        scan all listed files at cmake-time for such included moc files and if it finds
#        them cause a rule to be generated to run moc at build time on the 
#        accompanying header file foo.h.
#        If a source file has the SKIP_AUTOMOC property set it will be ignored by this macro.
#
#  macro QT4_ADD_DBUS_INTERFACE(outfiles interface basename)
#        create a the interface header and implementation files with the 
#        given basename from the given interface xml file and add it to 
#        the list of sources
#
#  macro QT4_ADD_DBUS_INTERFACES(outfiles inputfile ... )
#        create the interface header and implementation files 
#        for all listed interface xml files
#        the name will be automatically determined from the name of the xml file
#
#  macro QT4_ADD_DBUS_ADAPTOR(outfiles xmlfile parentheader parentclassname [basename] [classname])
#        create a dbus adaptor (header and implementation file) from the xml file
#        describing the interface, and add it to the list of sources. The adaptor
#        forwards the calls to a parent class, defined in parentheader and named
#        parentclassname. The name of the generated files will be
#        <basename>adaptor.{cpp,h} where basename defaults to the basename of the xml file.
#        If <classname> is provided, then it will be used as the classname of the
#        adaptor itself.
#
#  macro QT4_GENERATE_DBUS_INTERFACE( header [interfacename] OPTIONS ...)
#        generate the xml interface file from the given header.
#        If the optional argument interfacename is omitted, the name of the 
#        interface file is constructed from the basename of the header with
#        the suffix .xml appended.
#        Options may be given to qdbuscpp2xml, such as those found when executing "qdbuscpp2xml --help"
#
#  macro QT4_CREATE_TRANSLATION( qm_files directories ... sources ... 
#                                ts_files ... OPTIONS ...)
#        out: qm_files
#        in:  directories sources ts_files
#        options: flags to pass to lupdate, such as -extensions to specify
#        extensions for a directory scan.
#        generates commands to create .ts (vie lupdate) and .qm
#        (via lrelease) - files from directories and/or sources. The ts files are 
#        created and/or updated in the source tree (unless given with full paths).
#        The qm files are generated in the build tree.
#        Updating the translations can be done by adding the qm_files
#        to the source list of your library/executable, so they are
#        always updated, or by adding a custom target to control when
#        they get updated/generated.
#
#  macro QT4_ADD_TRANSLATION( qm_files ts_files ... )
#        out: qm_files
#        in:  ts_files
#        generates commands to create .qm from .ts - files. The generated
#        filenames can be found in qm_files. The ts_files
#        must exists and are not updated in any way.
#
#
#  Below is a detailed list of variables that FindQt4.cmake sets.
#  QT_FOUND         If false, don't try to use Qt.
#  QT4_FOUND        If false, don't try to use Qt 4.
#
#  QT_VERSION_MAJOR The major version of Qt found.
#  QT_VERSION_MINOR The minor version of Qt found.
#  QT_VERSION_PATCH The patch version of Qt found.
#
#  QT_EDITION               Set to the edition of Qt (i.e. DesktopLight)
#  QT_EDITION_DESKTOPLIGHT  True if QT_EDITION == DesktopLight
#  QT_QTCORE_FOUND          True if QtCore was found.
#  QT_QTGUI_FOUND           True if QtGui was found.
#  QT_QT3SUPPORT_FOUND      True if Qt3Support was found.
#  QT_QTASSISTANT_FOUND     True if QtAssistant was found.
#  QT_QAXCONTAINER_FOUND     True if QAxContainer was found (Windows only).
#  QT_QAXSERVER_FOUND          True if QAxServer was found (Windows only).
#  QT_QTDBUS_FOUND          True if QtDBus was found.
#  QT_QTDESIGNER_FOUND      True if QtDesigner was found.
#  QT_QTDESIGNERCOMPONENTS  True if QtDesignerComponents was found.
#  QT_QTMOTIF_FOUND         True if QtMotif was found.
#  QT_QTNETWORK_FOUND       True if QtNetwork was found.
#  QT_QTNSPLUGIN_FOUND      True if QtNsPlugin was found.
#  QT_QTOPENGL_FOUND        True if QtOpenGL was found.
#  QT_QTSQL_FOUND           True if QtSql was found.
#  QT_QTXML_FOUND           True if QtXml was found.
#  QT_QTSVG_FOUND           True if QtSvg was found.
#  QT_QTSCRIPT_FOUND        True if QtScript was found.
#  QT_QTTEST_FOUND          True if QtTest was found.
#  QT_QTUITOOLS_FOUND       True if QtUiTools was found.
#  QT_QTASSISTANTCLIENT_FOUND  True if QtAssistantClient was found.
#  QT_QTHELP_FOUND          True if QtHelp was found.
#  QT_QTWEBKIT_FOUND        True if QtWebKit was found.
#  QT_QTXMLPATTERNS_FOUND   True if QtXmlPatterns was found.
#  QT_PHONON_FOUND          True if phonon was found.
#  QT_QTSCRIPTTOOLS_FOUND   True if QtScriptTools was found.
#
#  QT_MAC_USE_COCOA    For Mac OS X, its whether Cocoa or Carbon is used.
#                      In general, this should not be used, but its useful
#                      when having platform specific code.
#
#  QT_DEFINITIONS   Definitions to use when compiling code that uses Qt.
#                   You do not need to use this if you include QT_USE_FILE.
#                   The QT_USE_FILE will also define QT_DEBUG and QT_NO_DEBUG
#                   to fit your current build type.  Those are not contained
#                   in QT_DEFINITIONS.
#                  
#  QT_INCLUDES      List of paths to all include directories of 
#                   Qt4 QT_INCLUDE_DIR and QT_QTCORE_INCLUDE_DIR are
#                   always in this variable even if NOTFOUND,
#                   all other INCLUDE_DIRS are
#                   only added if they are found.
#                   You do not need to use this if you include QT_USE_FILE.
#   
#
#  Include directories for the Qt modules are listed here.
#  You do not need to use these variables if you include QT_USE_FILE.
#
#  QT_INCLUDE_DIR              Path to "include" of Qt4
#  QT_QT3SUPPORT_INCLUDE_DIR   Path to "include/Qt3Support" 
#  QT_QTASSISTANT_INCLUDE_DIR  Path to "include/QtAssistant" 
#  QT_QAXCONTAINER_INCLUDE_DIR  Path to "include/ActiveQt" (Windows only)
#  QT_QAXSERVER_INCLUDE_DIR  Path to "include/ActiveQt" (Windows only)
#  QT_QTCORE_INCLUDE_DIR       Path to "include/QtCore"         
#  QT_QTDESIGNER_INCLUDE_DIR   Path to "include/QtDesigner" 
#  QT_QTDESIGNERCOMPONENTS_INCLUDE_DIR   Path to "include/QtDesigner"
#  QT_QTDBUS_INCLUDE_DIR       Path to "include/QtDBus" 
#  QT_QTGUI_INCLUDE_DIR        Path to "include/QtGui" 
#  QT_QTMOTIF_INCLUDE_DIR      Path to "include/QtMotif" 
#  QT_QTNETWORK_INCLUDE_DIR    Path to "include/QtNetwork" 
#  QT_QTNSPLUGIN_INCLUDE_DIR   Path to "include/QtNsPlugin" 
#  QT_QTOPENGL_INCLUDE_DIR     Path to "include/QtOpenGL" 
#  QT_QTSQL_INCLUDE_DIR        Path to "include/QtSql" 
#  QT_QTXML_INCLUDE_DIR        Path to "include/QtXml" 
#  QT_QTSVG_INCLUDE_DIR        Path to "include/QtSvg"
#  QT_QTSCRIPT_INCLUDE_DIR     Path to "include/QtScript"
#  QT_QTTEST_INCLUDE_DIR       Path to "include/QtTest"
#  QT_QTASSISTANTCLIENT_INCLUDE_DIR       Path to "include/QtAssistant"
#  QT_QTHELP_INCLUDE_DIR       Path to "include/QtHelp"
#  QT_QTWEBKIT_INCLUDE_DIR     Path to "include/QtWebKit"
#  QT_QTXMLPATTERNS_INCLUDE_DIR  Path to "include/QtXmlPatterns"
#  QT_PHONON_INCLUDE_DIR       Path to "include/phonon"
#  QT_QTSCRIPTTOOLS_INCLUDE_DIR       Path to "include/QtScriptTools"
#                            
#  QT_BINARY_DIR               Path to "bin" of Qt4
#  QT_LIBRARY_DIR              Path to "lib" of Qt4
#  QT_PLUGINS_DIR              Path to "plugins" for Qt4
#  QT_TRANSLATIONS_DIR         Path to "translations" of Qt4
#  QT_DOC_DIR                  Path to "doc" of Qt4
#  QT_MKSPECS_DIR              Path to "mkspecs" of Qt4
#                            
#
# The Qt toolkit may contain both debug and release libraries.
# In that case, the following library variables will contain both.
# You do not need to use these variables if you include QT_USE_FILE,
# and use QT_LIBRARIES.
#
#  QT_QT3SUPPORT_LIBRARY            The Qt3Support library
#  QT_QTASSISTANT_LIBRARY           The QtAssistant library
#  QT_QAXCONTAINER_LIBRARY           The QAxContainer library (Windows only)
#  QT_QAXSERVER_LIBRARY                The QAxServer library (Windows only)
#  QT_QTCORE_LIBRARY                The QtCore library
#  QT_QTDBUS_LIBRARY                The QtDBus library
#  QT_QTDESIGNER_LIBRARY            The QtDesigner library
#  QT_QTDESIGNERCOMPONENTS_LIBRARY  The QtDesignerComponents library
#  QT_QTGUI_LIBRARY                 The QtGui library
#  QT_QTMOTIF_LIBRARY               The QtMotif library
#  QT_QTNETWORK_LIBRARY             The QtNetwork library
#  QT_QTNSPLUGIN_LIBRARY            The QtNsPLugin library
#  QT_QTOPENGL_LIBRARY              The QtOpenGL library
#  QT_QTSQL_LIBRARY                 The QtSql library
#  QT_QTXML_LIBRARY                 The QtXml library
#  QT_QTSVG_LIBRARY                 The QtSvg library
#  QT_QTSCRIPT_LIBRARY              The QtScript library
#  QT_QTTEST_LIBRARY                The QtTest library
#  QT_QTMAIN_LIBRARY                The qtmain library for Windows
#  QT_QTUITOOLS_LIBRARY             The QtUiTools library
#  QT_QTASSISTANTCLIENT_LIBRARY     The QtAssistantClient library
#  QT_QTHELP_LIBRARY                The QtHelp library
#  QT_QTWEBKIT_LIBRARY              The QtWebKit library
#  QT_QTXMLPATTERNS_LIBRARY         The QtXmlPatterns library
#  QT_PHONON_LIBRARY                The phonon library
#  QT_QTSCRIPTTOOLS_LIBRARY         The QtScriptTools library
#  
# also defined, but NOT for general use are
#  QT_MOC_EXECUTABLE                   Where to find the moc tool.
#  QT_UIC_EXECUTABLE                   Where to find the uic tool.
#  QT_UIC3_EXECUTABLE                  Where to find the uic3 tool.
#  QT_RCC_EXECUTABLE                   Where to find the rcc tool
#  QT_DBUSCPP2XML_EXECUTABLE           Where to find the qdbuscpp2xml tool.
#  QT_DBUSXML2CPP_EXECUTABLE           Where to find the qdbusxml2cpp tool.
#  QT_LUPDATE_EXECUTABLE               Where to find the lupdate tool.
#  QT_LRELEASE_EXECUTABLE              Where to find the lrelease tool.
#  QT_QCOLLECTIONGENERATOR_EXECUTABLE  Where to find the qcollectiongenerator tool.
#  
#
# These are around for backwards compatibility 
# they will be set
#  QT_WRAP_CPP  Set true if QT_MOC_EXECUTABLE is found
#  QT_WRAP_UI   Set true if QT_UIC_EXECUTABLE is found
#  
# These variables do _NOT_ have any effect anymore (compared to FindQt.cmake)
#  QT_MT_REQUIRED         Qt4 is now always multithreaded
#  
# These variables are set to "" Because Qt structure changed 
# (They make no sense in Qt4)
#  QT_QT_LIBRARY        Qt-Library is now split

#=============================================================================
# Copyright 2005-2009 Kitware, Inc.
#
# Distributed under the OSI-approved BSD License (the "License");
# see accompanying file Copyright.txt for details.
#
# This software is distributed WITHOUT ANY WARRANTY; without even the
# implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
# See the License for more information.
#=============================================================================
# (To distributed this file outside of CMake, substitute the full
#  License text for the above reference.)

# Use FIND_PACKAGE( Qt4 COMPONENTS ... ) to enable modules
IF( Qt4_FIND_COMPONENTS )
  FOREACH( component ${Qt4_FIND_COMPONENTS} )
    STRING( TOUPPER ${component} _COMPONENT )
    SET( QT_USE_${_COMPONENT} 1 )
  ENDFOREACH( component )
  
  # To make sure we don't use QtCore or QtGui when not in COMPONENTS
  IF(NOT QT_USE_QTCORE)
    SET( QT_DONT_USE_QTCORE 1 )
  ENDIF(NOT QT_USE_QTCORE)
  
  IF(NOT QT_USE_QTGUI)
    SET( QT_DONT_USE_QTGUI 1 )
  ENDIF(NOT QT_USE_QTGUI)

ENDIF( Qt4_FIND_COMPONENTS )

# If Qt3 has already been found, fail.
IF(QT_QT_LIBRARY)
  IF(Qt4_FIND_REQUIRED)
    MESSAGE( FATAL_ERROR "Qt3 and Qt4 cannot be used together in one project.  If switching to Qt4, the CMakeCache.txt needs to be cleaned.")
  ELSE(Qt4_FIND_REQUIRED)
    IF(NOT Qt4_FIND_QUIETLY)
      MESSAGE( STATUS    "Qt3 and Qt4 cannot be used together in one project.  If switching to Qt4, the CMakeCache.txt needs to be cleaned.")
    ENDIF(NOT Qt4_FIND_QUIETLY)
    RETURN()
  ENDIF(Qt4_FIND_REQUIRED)
ENDIF(QT_QT_LIBRARY)


INCLUDE(CheckSymbolExists)
INCLUDE(MacroAddFileDependencies)

SET(QT_USE_FILE ${CMAKE_ROOT}/Modules/UseQt4.cmake)

SET( QT_DEFINITIONS "")

SET(QT4_INSTALLED_VERSION_TOO_OLD FALSE)

#  macro for asking qmake to process pro files
MACRO(QT_QUERY_QMAKE outvar invar)
  IF(QT_QMAKE_EXECUTABLE)
    FILE(WRITE ${CMAKE_CURRENT_BINARY_DIR}${CMAKE_FILES_DIRECTORY}/CMakeTmpQmake/tmp.pro
         "message(CMAKE_MESSAGE<$$${invar}>)")

    # Invoke qmake with the tmp.pro program to get the desired
    # information.  Use the same variable for both stdout and stderr
    # to make sure we get the output on all platforms.
    EXECUTE_PROCESS(COMMAND ${QT_QMAKE_EXECUTABLE}
      WORKING_DIRECTORY  
      ${CMAKE_CURRENT_BINARY_DIR}${CMAKE_FILES_DIRECTORY}/CMakeTmpQmake
      OUTPUT_VARIABLE _qmake_query_output
      RESULT_VARIABLE _qmake_result
      ERROR_VARIABLE _qmake_query_output )

    FILE(REMOVE_RECURSE 
         "${CMAKE_CURRENT_BINARY_DIR}${CMAKE_FILES_DIRECTORY}/CMakeTmpQmake")

    IF(_qmake_result)
      MESSAGE(WARNING " querying qmake for ${invar}.  qmake reported:\n${_qmake_query_output}")
    ELSE(_qmake_result)
      STRING(REGEX REPLACE ".*CMAKE_MESSAGE<([^>]*).*" "\\1" ${outvar} "${_qmake_query_output}")
    ENDIF(_qmake_result)

  ENDIF(QT_QMAKE_EXECUTABLE)
ENDMACRO(QT_QUERY_QMAKE)

GET_FILENAME_COMPONENT(qt_install_version "[HKEY_CURRENT_USER\\Software\\trolltech\\Versions;DefaultQtVersion]" NAME)
# check for qmake
FIND_PROGRAM(QT_QMAKE_EXECUTABLE NAMES qmake qmake4 qmake-qt4 PATHS
  "[HKEY_CURRENT_USER\\Software\\Trolltech\\Qt3Versions\\4.0.0;InstallDir]/bin"
  "[HKEY_CURRENT_USER\\Software\\Trolltech\\Versions\\4.0.0;InstallDir]/bin"
  "[HKEY_CURRENT_USER\\Software\\Trolltech\\Versions\\${qt_install_version};InstallDir]/bin"
  $ENV{QTDIR}/bin
)

IF (QT_QMAKE_EXECUTABLE)

  IF(QT_QMAKE_EXECUTABLE_LAST)
    STRING(COMPARE NOTEQUAL "${QT_QMAKE_EXECUTABLE_LAST}" "${QT_QMAKE_EXECUTABLE}" QT_QMAKE_CHANGED)
  ENDIF(QT_QMAKE_EXECUTABLE_LAST)

  SET(QT_QMAKE_EXECUTABLE_LAST "${QT_QMAKE_EXECUTABLE}" CACHE INTERNAL "" FORCE)

  SET(QT4_QMAKE_FOUND FALSE)
  
  EXEC_PROGRAM(${QT_QMAKE_EXECUTABLE} ARGS "-query QT_VERSION" OUTPUT_VARIABLE QTVERSION)

  # check for qt3 qmake and then try and find qmake4 or qmake-qt4 in the path
  IF("${QTVERSION}" MATCHES "Unknown")
    SET(QT_QMAKE_EXECUTABLE NOTFOUND CACHE FILEPATH "" FORCE)
    FIND_PROGRAM(QT_QMAKE_EXECUTABLE NAMES qmake4 qmake-qt4 PATHS
      "[HKEY_CURRENT_USER\\Software\\Trolltech\\Qt3Versions\\4.0.0;InstallDir]/bin"
      "[HKEY_CURRENT_USER\\Software\\Trolltech\\Versions\\4.0.0;InstallDir]/bin"
      $ENV{QTDIR}/bin
      )
    IF(QT_QMAKE_EXECUTABLE)
      EXEC_PROGRAM(${QT_QMAKE_EXECUTABLE} 
        ARGS "-query QT_VERSION" OUTPUT_VARIABLE QTVERSION)
    ENDIF(QT_QMAKE_EXECUTABLE)
  ENDIF("${QTVERSION}" MATCHES "Unknown")

  # check that we found the Qt4 qmake, Qt3 qmake output won't match here
  STRING(REGEX MATCH "^[0-9]+\\.[0-9]+\\.[0-9]+" qt_version_tmp "${QTVERSION}")
  IF (qt_version_tmp)

    # we need at least version 4.0.0
    IF (NOT QT_MIN_VERSION)
      SET(QT_MIN_VERSION "4.0.0")
    ENDIF (NOT QT_MIN_VERSION)

    #now parse the parts of the user given version string into variables
    STRING(REGEX MATCH "^[0-9]+\\.[0-9]+\\.[0-9]+" req_qt_major_vers "${QT_MIN_VERSION}")
    IF (NOT req_qt_major_vers)
      MESSAGE( FATAL_ERROR "Invalid Qt version string given: \"${QT_MIN_VERSION}\", expected e.g. \"4.0.1\"")
    ENDIF (NOT req_qt_major_vers)

    # now parse the parts of the user given version string into variables
    STRING(REGEX REPLACE "^([0-9]+)\\.[0-9]+\\.[0-9]+" "\\1" req_qt_major_vers "${QT_MIN_VERSION}")
    STRING(REGEX REPLACE "^[0-9]+\\.([0-9])+\\.[0-9]+" "\\1" req_qt_minor_vers "${QT_MIN_VERSION}")
    STRING(REGEX REPLACE "^[0-9]+\\.[0-9]+\\.([0-9]+)" "\\1" req_qt_patch_vers "${QT_MIN_VERSION}")

    # Suppport finding at least a particular version, for instance FIND_PACKAGE( Qt4 4.4.3 )
    # This implementation is a hack to avoid duplicating code and make sure we stay
    # source-compatible with CMake 2.6.x
    IF( Qt4_FIND_VERSION )
      SET( QT_MIN_VERSION ${Qt4_FIND_VERSION} )
      SET( req_qt_major_vers ${Qt4_FIND_VERSION_MAJOR} )
      SET( req_qt_minor_vers ${Qt4_FIND_VERSION_MINOR} )
      SET( req_qt_patch_vers ${Qt4_FIND_VERSION_PATCH} )
    ENDIF( Qt4_FIND_VERSION )

    IF (NOT req_qt_major_vers EQUAL 4)
      MESSAGE( FATAL_ERROR "Invalid Qt version string given: \"${QT_MIN_VERSION}\", major version 4 is required, e.g. \"4.0.1\"")
    ENDIF (NOT req_qt_major_vers EQUAL 4)

    # and now the version string given by qmake
    STRING(REGEX REPLACE "^([0-9]+)\\.[0-9]+\\.[0-9]+.*" "\\1" QT_VERSION_MAJOR "${QTVERSION}")
    STRING(REGEX REPLACE "^[0-9]+\\.([0-9])+\\.[0-9]+.*" "\\1" QT_VERSION_MINOR "${QTVERSION}")
    STRING(REGEX REPLACE "^[0-9]+\\.[0-9]+\\.([0-9]+).*" "\\1" QT_VERSION_PATCH "${QTVERSION}")

    # compute an overall version number which can be compared at once
    MATH(EXPR req_vers "${req_qt_major_vers}*10000 + ${req_qt_minor_vers}*100 + ${req_qt_patch_vers}")
    MATH(EXPR found_vers "${QT_VERSION_MAJOR}*10000 + ${QT_VERSION_MINOR}*100 + ${QT_VERSION_PATCH}")

    # Support finding *exactly* a particular version, for instance FIND_PACKAGE( Qt4 4.4.3 EXACT )
    IF( Qt4_FIND_VERSION_EXACT )
      IF(found_vers EQUAL req_vers)
        SET( QT4_QMAKE_FOUND TRUE )
      ELSE(found_vers EQUAL req_vers)
        SET( QT4_QMAKE_FOUND FALSE )
        IF (found_vers LESS req_vers)
          SET(QT4_INSTALLED_VERSION_TOO_OLD TRUE)
        ELSE (found_vers LESS req_vers)
          SET(QT4_INSTALLED_VERSION_TOO_NEW TRUE)
        ENDIF (found_vers LESS req_vers)
      ENDIF(found_vers EQUAL req_vers)
    ELSE( Qt4_FIND_VERSION_EXACT )
      IF (found_vers LESS req_vers)
        SET(QT4_QMAKE_FOUND FALSE)
        SET(QT4_INSTALLED_VERSION_TOO_OLD TRUE)
      ELSE (found_vers LESS req_vers)
        SET(QT4_QMAKE_FOUND TRUE)
      ENDIF (found_vers LESS req_vers)
    ENDIF( Qt4_FIND_VERSION_EXACT )
  ENDIF (qt_version_tmp)

ENDIF (QT_QMAKE_EXECUTABLE)

IF (QT4_QMAKE_FOUND)

  # ask qmake for the library dir
  # Set QT_LIBRARY_DIR
  IF (NOT QT_LIBRARY_DIR OR QT_QMAKE_CHANGED)
    EXEC_PROGRAM( ${QT_QMAKE_EXECUTABLE}
      ARGS "-query QT_INSTALL_LIBS"
      OUTPUT_VARIABLE QT_LIBRARY_DIR_TMP )
    # make sure we have / and not \ as qmake gives on windows
    FILE(TO_CMAKE_PATH "${QT_LIBRARY_DIR_TMP}" QT_LIBRARY_DIR_TMP)
    IF(EXISTS "${QT_LIBRARY_DIR_TMP}")
      SET(QT_LIBRARY_DIR ${QT_LIBRARY_DIR_TMP} CACHE PATH "Qt library dir" FORCE)
    ELSE(EXISTS "${QT_LIBRARY_DIR_TMP}")
      MESSAGE("Warning: QT_QMAKE_EXECUTABLE reported QT_INSTALL_LIBS as ${QT_LIBRARY_DIR_TMP}")
      MESSAGE("Warning: ${QT_LIBRARY_DIR_TMP} does NOT exist, Qt must NOT be installed correctly.")
    ENDIF(EXISTS "${QT_LIBRARY_DIR_TMP}")
  ENDIF(NOT QT_LIBRARY_DIR OR QT_QMAKE_CHANGED)
  
  IF (APPLE)
    IF (EXISTS ${QT_LIBRARY_DIR}/QtCore.framework)
      SET(QT_USE_FRAMEWORKS ON
        CACHE BOOL "Set to ON if Qt build uses frameworks." FORCE)
    ELSE (EXISTS ${QT_LIBRARY_DIR}/QtCore.framework)
      SET(QT_USE_FRAMEWORKS OFF
        CACHE BOOL "Set to ON if Qt build uses frameworks." FORCE)
    ENDIF (EXISTS ${QT_LIBRARY_DIR}/QtCore.framework)
    
    MARK_AS_ADVANCED(QT_USE_FRAMEWORKS)
  ENDIF (APPLE)
  
  # ask qmake for the binary dir
  IF (QT_LIBRARY_DIR AND NOT QT_BINARY_DIR  OR  QT_QMAKE_CHANGED)
     EXEC_PROGRAM(${QT_QMAKE_EXECUTABLE}
       ARGS "-query QT_INSTALL_BINS"
       OUTPUT_VARIABLE qt_bins )
     # make sure we have / and not \ as qmake gives on windows
     FILE(TO_CMAKE_PATH "${qt_bins}" qt_bins)
     SET(QT_BINARY_DIR ${qt_bins} CACHE INTERNAL "" FORCE)
  ENDIF (QT_LIBRARY_DIR AND NOT QT_BINARY_DIR  OR  QT_QMAKE_CHANGED)

  # ask qmake for the include dir
  IF (QT_LIBRARY_DIR AND NOT QT_HEADERS_DIR  OR  QT_QMAKE_CHANGED)
      EXEC_PROGRAM( ${QT_QMAKE_EXECUTABLE}
        ARGS "-query QT_INSTALL_HEADERS" 
        OUTPUT_VARIABLE qt_headers ) 
      # make sure we have / and not \ as qmake gives on windows
      FILE(TO_CMAKE_PATH "${qt_headers}" qt_headers)
      SET(QT_HEADERS_DIR ${qt_headers} CACHE INTERNAL "" FORCE)
  ENDIF (QT_LIBRARY_DIR AND NOT QT_HEADERS_DIR  OR  QT_QMAKE_CHANGED)


  # ask qmake for the documentation directory
  IF (QT_LIBRARY_DIR AND NOT QT_DOC_DIR  OR  QT_QMAKE_CHANGED)
    EXEC_PROGRAM( ${QT_QMAKE_EXECUTABLE}
      ARGS "-query QT_INSTALL_DOCS"
      OUTPUT_VARIABLE qt_doc_dir )
    # make sure we have / and not \ as qmake gives on windows
    FILE(TO_CMAKE_PATH "${qt_doc_dir}" qt_doc_dir)
    SET(QT_DOC_DIR ${qt_doc_dir} CACHE PATH "The location of the Qt docs" FORCE)
  ENDIF (QT_LIBRARY_DIR AND NOT QT_DOC_DIR  OR  QT_QMAKE_CHANGED)

  # ask qmake for the mkspecs directory
  IF (QT_LIBRARY_DIR AND NOT QT_MKSPECS_DIR  OR  QT_QMAKE_CHANGED)
    EXEC_PROGRAM( ${QT_QMAKE_EXECUTABLE}
      ARGS "-query QMAKE_MKSPECS"
      OUTPUT_VARIABLE qt_mkspecs_dirs )
    # do not replace : on windows as it might be a drive letter
    # and windows should already use ; as a separator
    IF(UNIX)
      STRING(REPLACE ":" ";" qt_mkspecs_dirs "${qt_mkspecs_dirs}")
    ENDIF(UNIX)
    SET(QT_MKSPECS_DIR NOTFOUND)
    FIND_PATH(QT_MKSPECS_DIR qconfig.pri PATHS ${qt_mkspecs_dirs}
      DOC "The location of the Qt mkspecs containing qconfig.pri"
      NO_DEFAULT_PATH )
  ENDIF (QT_LIBRARY_DIR AND NOT QT_MKSPECS_DIR  OR  QT_QMAKE_CHANGED)

  # ask qmake for the plugins directory
  IF (QT_LIBRARY_DIR AND NOT QT_PLUGINS_DIR  OR  QT_QMAKE_CHANGED)
    EXEC_PROGRAM( ${QT_QMAKE_EXECUTABLE}
      ARGS "-query QT_INSTALL_PLUGINS"
      OUTPUT_VARIABLE qt_plugins_dir )
    # make sure we have / and not \ as qmake gives on windows
    FILE(TO_CMAKE_PATH "${qt_plugins_dir}" qt_plugins_dir)
    SET(QT_PLUGINS_DIR ${qt_plugins_dir} CACHE PATH "The location of the Qt plugins" FORCE)
  ENDIF (QT_LIBRARY_DIR AND NOT QT_PLUGINS_DIR  OR  QT_QMAKE_CHANGED)

  # ask qmake for the translations directory
  IF (QT_LIBRARY_DIR AND NOT QT_TRANSLATIONS_DIR  OR  QT_QMAKE_CHANGED)
    EXEC_PROGRAM( ${QT_QMAKE_EXECUTABLE}
      ARGS "-query QT_INSTALL_TRANSLATIONS"
      OUTPUT_VARIABLE qt_translations_dir )
    # make sure we have / and not \ as qmake gives on windows
    FILE(TO_CMAKE_PATH "${qt_translations_dir}" qt_translations_dir)
    SET(QT_TRANSLATIONS_DIR ${qt_translations_dir} CACHE PATH "The location of the Qt translations" FORCE)
  ENDIF (QT_LIBRARY_DIR AND NOT QT_TRANSLATIONS_DIR  OR  QT_QMAKE_CHANGED)

  ########################################
  #
  #       Setting the INCLUDE-Variables
  #
  ########################################

  SET(QT_MODULES QtCore QtGui Qt3Support QtSvg QtScript QtTest QtUiTools 
                 QtHelp QtWebKit QtXmlPatterns phonon QtMotif QtNetwork 
                 QtNsPlugin QtOpenGL QtSql QtXml QtDesigner QtDBus QtScriptTools)

  IF(QT_QMAKE_CHANGED)
    FOREACH(QT_MODULE ${QT_MODULES})
      STRING(TOUPPER ${QT_MODULE} _upper_qt_module)
      SET(QT_${_upper_qt_module}_INCLUDE_DIR NOTFOUND)
      SET(QT_${_upper_qt_module}_LIBRARY_RELEASE NOTFOUND)
      SET(QT_${_upper_qt_module}_LIBRARY_DEBUG NOTFOUND)
    ENDFOREACH(QT_MODULE)
    SET(QT_QTDESIGNERCOMPONENTS_INCLUDE_DIR NOTFOUND)
    SET(QT_QTDESIGNERCOMPONENTS_LIBRARY_RELEASE NOTFOUND)
    SET(QT_QTDESIGNERCOMPONENTS_LIBRARY_DEBUG NOTFOUND)
    SET(QT_QTASSISTANTCLIENT_INCLUDE_DIR NOTFOUND)
    SET(QT_QTASSISTANTCLIENT_LIBRARY_RELEASE NOTFOUND)
    SET(QT_QTASSISTANTCLIENT_LIBRARY_DEBUG NOTFOUND)
    SET(QT_QTASSISTANT_INCLUDE_DIR NOTFOUND)
    SET(QT_QTASSISTANT_LIBRARY_RELEASE NOTFOUND)
    SET(QT_QTASSISTANT_LIBRARY_DEBUG NOTFOUND)
    SET(QT_QTCLUCENE_LIBRARY_RELEASE NOTFOUND)
    SET(QT_QTCLUCENE_LIBRARY_DEBUG NOTFOUND)
    SET(QT_QAXCONTAINER_INCLUDE_DIR NOTFOUND)
    SET(QT_QAXCONTAINER_LIBRARY_RELEASE NOTFOUND)
    SET(QT_QAXCONTAINER_LIBRARY_DEBUG NOTFOUND)
    SET(QT_QAXSERVER_INCLUDE_DIR NOTFOUND)
    SET(QT_QAXSERVER_LIBRARY_RELEASE NOTFOUND)
    SET(QT_QAXSERVER_LIBRARY_DEBUG NOTFOUND)
    IF(WIN32)
      SET(QT_QTMAIN_LIBRARY_DEBUG NOTFOUND)
      SET(QT_QTMAIN_LIBRARY_RELEASE NOTFOUND)
    ENDIF(WIN32)
  ENDIF(QT_QMAKE_CHANGED)

  FOREACH(QT_MODULE ${QT_MODULES})
    STRING(TOUPPER ${QT_MODULE} _upper_qt_module)
    FIND_PATH(QT_${_upper_qt_module}_INCLUDE_DIR ${QT_MODULE}
              PATHS
              ${QT_HEADERS_DIR}/${QT_MODULE}
              ${QT_LIBRARY_DIR}/${QT_MODULE}.framework/Headers
              NO_DEFAULT_PATH
      )
  ENDFOREACH(QT_MODULE)
  
  IF(WIN32)
    SET(QT_MODULES ${QT_MODULES} QAxContainer QAxServer)
    # Set QT_AXCONTAINER_INCLUDE_DIR and QT_AXSERVER_INCLUDE_DIR
    FIND_PATH(QT_QAXCONTAINER_INCLUDE_DIR ActiveQt
      PATHS
      ${QT_HEADERS_DIR}/ActiveQt
      NO_DEFAULT_PATH
      )
    FIND_PATH(QT_QAXSERVER_INCLUDE_DIR ActiveQt
      PATHS
      ${QT_HEADERS_DIR}/ActiveQt
      NO_DEFAULT_PATH
      )
  ENDIF(WIN32)
  
  # Set QT_QTDESIGNERCOMPONENTS_INCLUDE_DIR
  FIND_PATH(QT_QTDESIGNERCOMPONENTS_INCLUDE_DIR QDesignerComponents
    PATHS
    ${QT_HEADERS_DIR}/QtDesigner
    ${QT_LIBRARY_DIR}/QtDesigner.framework/Headers
    NO_DEFAULT_PATH
    )
  
  # Set QT_QTASSISTANT_INCLUDE_DIR
  FIND_PATH(QT_QTASSISTANT_INCLUDE_DIR QAssistantClient
    PATHS
    ${QT_HEADERS_DIR}/QtAssistant
    ${QT_LIBRARY_DIR}/QtAssistant.framework/Headers
    NO_DEFAULT_PATH
    )
  
  # Set QT_QTASSISTANTCLIENT_INCLUDE_DIR
  FIND_PATH(QT_QTASSISTANTCLIENT_INCLUDE_DIR QAssistantClient
    PATHS
    ${QT_HEADERS_DIR}/QtAssistant
    ${QT_LIBRARY_DIR}/QtAssistant.framework/Headers
    NO_DEFAULT_PATH
    )
  
  # Set QT_INCLUDE_DIR by removine "/QtCore" in the string ${QT_QTCORE_INCLUDE_DIR}
  IF( QT_QTCORE_INCLUDE_DIR )
    IF (QT_USE_FRAMEWORKS)
      SET(QT_INCLUDE_DIR ${QT_HEADERS_DIR})
    ELSE (QT_USE_FRAMEWORKS)
      STRING( REGEX REPLACE "/QtCore$" "" qt4_include_dir ${QT_QTCORE_INCLUDE_DIR})
      SET( QT_INCLUDE_DIR ${qt4_include_dir})
    ENDIF (QT_USE_FRAMEWORKS)
  ENDIF( QT_QTCORE_INCLUDE_DIR )

  IF( NOT QT_INCLUDE_DIR)
    IF(Qt4_FIND_REQUIRED)
      MESSAGE( FATAL_ERROR "Could NOT find QtCore header")
    ENDIF(Qt4_FIND_REQUIRED)
  ENDIF( NOT QT_INCLUDE_DIR)

  # Make variables changeble to the advanced user
  MARK_AS_ADVANCED( QT_LIBRARY_DIR QT_INCLUDE_DIR QT_DOC_DIR QT_MKSPECS_DIR
                    QT_PLUGINS_DIR QT_TRANSLATIONS_DIR)

  # Set QT_INCLUDES
  SET( QT_INCLUDES ${QT_MKSPECS_DIR}/default ${QT_INCLUDE_DIR} )


  #############################################
  #
  # Find out what window system we're using
  #
  #############################################
  # Save required variable
  SET(CMAKE_REQUIRED_INCLUDES_SAVE ${CMAKE_REQUIRED_INCLUDES})
  SET(CMAKE_REQUIRED_FLAGS_SAVE    ${CMAKE_REQUIRED_FLAGS})
  # Add QT_INCLUDE_DIR to CMAKE_REQUIRED_INCLUDES
  SET(CMAKE_REQUIRED_INCLUDES "${CMAKE_REQUIRED_INCLUDES};${QT_INCLUDE_DIR}")
  # On Mac OS X when Qt has framework support, also add the framework path
  IF( QT_USE_FRAMEWORKS )
    SET(CMAKE_REQUIRED_FLAGS "-F${QT_LIBRARY_DIR} ")
  ENDIF( QT_USE_FRAMEWORKS )
  # Check for Window system symbols (note: only one should end up being set)
  CHECK_SYMBOL_EXISTS(Q_WS_X11 "QtCore/qglobal.h" Q_WS_X11)
  CHECK_SYMBOL_EXISTS(Q_WS_WIN "QtCore/qglobal.h" Q_WS_WIN)
  CHECK_SYMBOL_EXISTS(Q_WS_QWS "QtCore/qglobal.h" Q_WS_QWS)
  CHECK_SYMBOL_EXISTS(Q_WS_MAC "QtCore/qglobal.h" Q_WS_MAC)
  IF(Q_WS_MAC)
    IF(QT_QMAKE_CHANGED)
      UNSET(QT_MAC_USE_COCOA CACHE)
    ENDIF(QT_QMAKE_CHANGED)
    CHECK_SYMBOL_EXISTS(QT_MAC_USE_COCOA "QtCore/qconfig.h" QT_MAC_USE_COCOA)
  ENDIF(Q_WS_MAC)

  IF (QT_QTCOPY_REQUIRED)
     CHECK_SYMBOL_EXISTS(QT_IS_QTCOPY "QtCore/qglobal.h" QT_KDE_QT_COPY)
     IF (NOT QT_IS_QTCOPY)
        MESSAGE(FATAL_ERROR "qt-copy is required, but hasn't been found")
     ENDIF (NOT QT_IS_QTCOPY)
  ENDIF (QT_QTCOPY_REQUIRED)

  # Restore CMAKE_REQUIRED_INCLUDES and CMAKE_REQUIRED_FLAGS variables
  SET(CMAKE_REQUIRED_INCLUDES ${CMAKE_REQUIRED_INCLUDES_SAVE})
  SET(CMAKE_REQUIRED_FLAGS    ${CMAKE_REQUIRED_FLAGS_SAVE})
  #
  #############################################



  #######################################
  #
  #       Qt configuration
  #
  #######################################
  IF(EXISTS "${QT_MKSPECS_DIR}/qconfig.pri")
    FILE(READ ${QT_MKSPECS_DIR}/qconfig.pri _qconfig_FILE_contents)
    STRING(REGEX MATCH "QT_CONFIG[^\n]+" QT_QCONFIG "${_qconfig_FILE_contents}")
    STRING(REGEX MATCH "CONFIG[^\n]+" QT_CONFIG "${_qconfig_FILE_contents}")
    STRING(REGEX MATCH "EDITION[^\n]+" QT_EDITION "${_qconfig_FILE_contents}")
    STRING(REGEX MATCH "QT_LIBINFIX[^\n]+" _qconfig_qt_libinfix "${_qconfig_FILE_contents}")
    STRING(REGEX REPLACE "QT_LIBINFIX *= *([^\n]*)" "\\1" QT_LIBINFIX "${_qconfig_qt_libinfix}")
  ENDIF(EXISTS "${QT_MKSPECS_DIR}/qconfig.pri")
  IF("${QT_EDITION}" MATCHES "DesktopLight")
    SET(QT_EDITION_DESKTOPLIGHT 1)
  ENDIF("${QT_EDITION}" MATCHES "DesktopLight")




  # find the libraries
  FOREACH(QT_MODULE ${QT_MODULES})
    STRING(TOUPPER ${QT_MODULE} _upper_qt_module)
    FIND_LIBRARY(QT_${_upper_qt_module}_LIBRARY_RELEASE 
                 NAMES ${QT_MODULE}${QT_LIBINFIX} ${QT_MODULE}${QT_LIBINFIX}4
                 PATHS ${QT_LIBRARY_DIR} NO_DEFAULT_PATH
        )
    FIND_LIBRARY(QT_${_upper_qt_module}_LIBRARY_DEBUG 
                 NAMES ${QT_MODULE}${QT_LIBINFIX}_debug ${QT_MODULE}${QT_LIBINFIX}d ${QT_MODULE}${QT_LIBINFIX}d4
                 PATHS ${QT_LIBRARY_DIR} NO_DEFAULT_PATH
        )
  ENDFOREACH(QT_MODULE)

  # QtUiTools not with other frameworks with binary installation (in /usr/lib)
  IF(Q_WS_MAC AND QT_QTCORE_LIBRARY_RELEASE AND NOT QT_QTUITOOLS_LIBRARY_RELEASE)
    FIND_LIBRARY(QT_QTUITOOLS_LIBRARY_RELEASE NAMES QtUiTools${QT_LIBINFIX} PATHS ${QT_LIBRARY_DIR})
  ENDIF(Q_WS_MAC AND QT_QTCORE_LIBRARY_RELEASE AND NOT QT_QTUITOOLS_LIBRARY_RELEASE)

  IF( NOT QT_QTCORE_LIBRARY_DEBUG AND NOT QT_QTCORE_LIBRARY_RELEASE )
    
    # try dropping a hint if trying to use Visual Studio with Qt built by mingw
    IF(QT_LIBRARY_DIR AND MSVC)
      IF(EXISTS ${QT_LIBRARY_DIR}/libqtmain.a)
        MESSAGE( FATAL_ERROR "It appears you're trying to use Visual Studio with Qt built by mingw")
      ENDIF(EXISTS ${QT_LIBRARY_DIR}/libqtmain.a)
    ENDIF(QT_LIBRARY_DIR AND MSVC)

    IF(Qt4_FIND_REQUIRED)
      MESSAGE( FATAL_ERROR "Could NOT find QtCore. Check ${CMAKE_BINARY_DIR}${CMAKE_FILES_DIRECTORY}/CMakeError.log for more details.")
    ENDIF(Qt4_FIND_REQUIRED)
  ENDIF( NOT QT_QTCORE_LIBRARY_DEBUG AND NOT QT_QTCORE_LIBRARY_RELEASE )

  # Set QT_QTDESIGNERCOMPONENTS_LIBRARY
  FIND_LIBRARY(QT_QTDESIGNERCOMPONENTS_LIBRARY_RELEASE NAMES QtDesignerComponents${QT_LIBINFIX} QtDesignerComponents${QT_LIBINFIX}4 PATHS ${QT_LIBRARY_DIR}        NO_DEFAULT_PATH)
  FIND_LIBRARY(QT_QTDESIGNERCOMPONENTS_LIBRARY_DEBUG   NAMES QtDesignerComponents${QT_LIBINFIX}_debug QtDesignerComponents${QT_LIBINFIX}d QtDesignerComponents${QT_LIBINFIX}d4 PATHS ${QT_LIBRARY_DIR} NO_DEFAULT_PATH)

  # Set QT_QTMAIN_LIBRARY
  IF(WIN32)
    FIND_LIBRARY(QT_QTMAIN_LIBRARY_RELEASE NAMES qtmain${QT_LIBINFIX} PATHS ${QT_LIBRARY_DIR}
      NO_DEFAULT_PATH)
    FIND_LIBRARY(QT_QTMAIN_LIBRARY_DEBUG NAMES qtmain${QT_LIBINFIX}d PATHS ${QT_LIBRARY_DIR}
      NO_DEFAULT_PATH)
  ENDIF(WIN32)
  
  # Set QT_QTASSISTANTCLIENT_LIBRARY
  FIND_LIBRARY(QT_QTASSISTANTCLIENT_LIBRARY_RELEASE NAMES QtAssistantClient${QT_LIBINFIX} QtAssistantClient${QT_LIBINFIX}4 PATHS ${QT_LIBRARY_DIR}        NO_DEFAULT_PATH)
  FIND_LIBRARY(QT_QTASSISTANTCLIENT_LIBRARY_DEBUG   NAMES QtAssistantClient${QT_LIBINFIX}_debug QtAssistantClient${QT_LIBINFIX}d QtAssistantClient${QT_LIBINFIX}d4 PATHS ${QT_LIBRARY_DIR} NO_DEFAULT_PATH)
  
  # Set QT_QTASSISTANT_LIBRARY
  FIND_LIBRARY(QT_QTASSISTANT_LIBRARY_RELEASE NAMES QtAssistantClient${QT_LIBINFIX} QtAssistantClient${QT_LIBINFIX}4 QtAssistant${QT_LIBINFIX} QtAssistant${QT_LIBINFIX}4 PATHS ${QT_LIBRARY_DIR}        NO_DEFAULT_PATH)
  FIND_LIBRARY(QT_QTASSISTANT_LIBRARY_DEBUG   NAMES QtAssistantClient${QT_LIBINFIX}_debug QtAssistantClient${QT_LIBINFIX}d QtAssistantClient${QT_LIBINFIX}d4 QtAssistant${QT_LIBINFIX}_debug QtAssistant${QT_LIBINFIX}d4 PATHS ${QT_LIBRARY_DIR} NO_DEFAULT_PATH)

  # Set QT_QTHELP_LIBRARY
  FIND_LIBRARY(QT_QTCLUCENE_LIBRARY_RELEASE NAMES QtCLucene${QT_LIBINFIX} QtCLucene${QT_LIBINFIX}4 PATHS ${QT_LIBRARY_DIR}        NO_DEFAULT_PATH)
  FIND_LIBRARY(QT_QTCLUCENE_LIBRARY_DEBUG   NAMES QtCLucene${QT_LIBINFIX}_debug QtCLucene${QT_LIBINFIX}d QtCLucene${QT_LIBINFIX}d4 PATHS ${QT_LIBRARY_DIR} NO_DEFAULT_PATH)
  # QtCLucene not with other frameworks with binary installation (in /usr/lib)
  IF(Q_WS_MAC AND QT_QTCORE_LIBRARY_RELEASE AND NOT QT_QTCLUCENE_LIBRARY_RELEASE)
    FIND_LIBRARY(QT_QTCLUCENE_LIBRARY_RELEASE NAMES QtCLucene${QT_LIBINFIX} PATHS ${QT_LIBRARY_DIR})
  ENDIF(Q_WS_MAC AND QT_QTCORE_LIBRARY_RELEASE AND NOT QT_QTCLUCENE_LIBRARY_RELEASE)

  ############################################
  #
  # Check the existence of the libraries.
  #
  ############################################

  MACRO (_QT4_ADJUST_LIB_VARS basename)
    IF (QT_${basename}_LIBRARY_RELEASE OR QT_${basename}_LIBRARY_DEBUG)

      # if only the release version was found, set the debug variable also to the release version
      IF (QT_${basename}_LIBRARY_RELEASE AND NOT QT_${basename}_LIBRARY_DEBUG)
        SET(QT_${basename}_LIBRARY_DEBUG ${QT_${basename}_LIBRARY_RELEASE})
        SET(QT_${basename}_LIBRARY       ${QT_${basename}_LIBRARY_RELEASE})
        SET(QT_${basename}_LIBRARIES     ${QT_${basename}_LIBRARY_RELEASE})
      ENDIF (QT_${basename}_LIBRARY_RELEASE AND NOT QT_${basename}_LIBRARY_DEBUG)

      # if only the debug version was found, set the release variable also to the debug version
      IF (QT_${basename}_LIBRARY_DEBUG AND NOT QT_${basename}_LIBRARY_RELEASE)
        SET(QT_${basename}_LIBRARY_RELEASE ${QT_${basename}_LIBRARY_DEBUG})
        SET(QT_${basename}_LIBRARY         ${QT_${basename}_LIBRARY_DEBUG})
        SET(QT_${basename}_LIBRARIES       ${QT_${basename}_LIBRARY_DEBUG})
      ENDIF (QT_${basename}_LIBRARY_DEBUG AND NOT QT_${basename}_LIBRARY_RELEASE)

      IF (QT_${basename}_LIBRARY_DEBUG AND QT_${basename}_LIBRARY_RELEASE)
        # if the generator supports configuration types then set
        # optimized and debug libraries, or if the CMAKE_BUILD_TYPE has a value
        IF (CMAKE_CONFIGURATION_TYPES OR CMAKE_BUILD_TYPE)
          SET(QT_${basename}_LIBRARY       optimized ${QT_${basename}_LIBRARY_RELEASE} debug ${QT_${basename}_LIBRARY_DEBUG})
        ELSE(CMAKE_CONFIGURATION_TYPES OR CMAKE_BUILD_TYPE)
          # if there are no configuration types and CMAKE_BUILD_TYPE has no value
          # then just use the release libraries
          SET(QT_${basename}_LIBRARY       ${QT_${basename}_LIBRARY_RELEASE} )
        ENDIF(CMAKE_CONFIGURATION_TYPES OR CMAKE_BUILD_TYPE)
        SET(QT_${basename}_LIBRARIES       optimized ${QT_${basename}_LIBRARY_RELEASE} debug ${QT_${basename}_LIBRARY_DEBUG})
      ENDIF (QT_${basename}_LIBRARY_DEBUG AND QT_${basename}_LIBRARY_RELEASE)

      SET(QT_${basename}_LIBRARY ${QT_${basename}_LIBRARY} CACHE STRING "The Qt ${basename} library" FORCE)

      IF (QT_${basename}_LIBRARY)
        SET(QT_${basename}_FOUND 1)
      ENDIF (QT_${basename}_LIBRARY)

    ENDIF (QT_${basename}_LIBRARY_RELEASE OR QT_${basename}_LIBRARY_DEBUG)

    IF (QT_${basename}_INCLUDE_DIR)
      #add the include directory to QT_INCLUDES
      SET(QT_INCLUDES "${QT_${basename}_INCLUDE_DIR}" ${QT_INCLUDES})
    ENDIF (QT_${basename}_INCLUDE_DIR)

    # Make variables changeble to the advanced user
    MARK_AS_ADVANCED(QT_${basename}_LIBRARY QT_${basename}_LIBRARY_RELEASE QT_${basename}_LIBRARY_DEBUG QT_${basename}_INCLUDE_DIR)
  ENDMACRO (_QT4_ADJUST_LIB_VARS)


  # Set QT_xyz_LIBRARY variable and add 
  # library include path to QT_INCLUDES
  _QT4_ADJUST_LIB_VARS(QTCORE)
  _QT4_ADJUST_LIB_VARS(QTGUI)
  _QT4_ADJUST_LIB_VARS(QT3SUPPORT)
  _QT4_ADJUST_LIB_VARS(QTASSISTANT)
  _QT4_ADJUST_LIB_VARS(QTDESIGNER)
  _QT4_ADJUST_LIB_VARS(QTDESIGNERCOMPONENTS)
  _QT4_ADJUST_LIB_VARS(QTNETWORK)
  _QT4_ADJUST_LIB_VARS(QTNSPLUGIN)
  _QT4_ADJUST_LIB_VARS(QTOPENGL)
  _QT4_ADJUST_LIB_VARS(QTSQL)
  _QT4_ADJUST_LIB_VARS(QTXML)
  _QT4_ADJUST_LIB_VARS(QTSVG)
  _QT4_ADJUST_LIB_VARS(QTSCRIPT)
  _QT4_ADJUST_LIB_VARS(QTUITOOLS)
  _QT4_ADJUST_LIB_VARS(QTTEST)
  _QT4_ADJUST_LIB_VARS(QTDBUS)
  _QT4_ADJUST_LIB_VARS(QTASSISTANTCLIENT)
  _QT4_ADJUST_LIB_VARS(QTHELP)
  _QT4_ADJUST_LIB_VARS(QTWEBKIT)
  _QT4_ADJUST_LIB_VARS(QTXMLPATTERNS)
  _QT4_ADJUST_LIB_VARS(PHONON)
  _QT4_ADJUST_LIB_VARS(QTCLUCENE)
  _QT4_ADJUST_LIB_VARS(QTSCRIPTTOOLS)
 

  # platform dependent libraries
  IF(Q_WS_X11)
    _QT4_ADJUST_LIB_VARS(QTMOTIF)
  ENDIF(Q_WS_X11)
  IF(WIN32)
    _QT4_ADJUST_LIB_VARS(QTMAIN)
    _QT4_ADJUST_LIB_VARS(QAXSERVER)
    _QT4_ADJUST_LIB_VARS(QAXCONTAINER)
  ENDIF(WIN32)
  

  #######################################
  #
  #       Check the executables of Qt 
  #          ( moc, uic, rcc )
  #
  #######################################


  IF(QT_QMAKE_CHANGED)
    SET(QT_UIC_EXECUTABLE NOTFOUND)
    SET(QT_MOC_EXECUTABLE NOTFOUND)
    SET(QT_UIC3_EXECUTABLE NOTFOUND)
    SET(QT_RCC_EXECUTABLE NOTFOUND)
    SET(QT_DBUSCPP2XML_EXECUTABLE NOTFOUND)
    SET(QT_DBUSXML2CPP_EXECUTABLE NOTFOUND)
    SET(QT_LUPDATE_EXECUTABLE NOTFOUND)
    SET(QT_LRELEASE_EXECUTABLE NOTFOUND)
    SET(QT_QCOLLECTIONGENERATOR_EXECUTABLE NOTFOUND)
  ENDIF(QT_QMAKE_CHANGED)
  
  FIND_PROGRAM(QT_MOC_EXECUTABLE
    NAMES moc-qt4 moc
    PATHS ${QT_BINARY_DIR}
    NO_DEFAULT_PATH
    )

  FIND_PROGRAM(QT_UIC_EXECUTABLE
    NAMES uic-qt4 uic
    PATHS ${QT_BINARY_DIR}
    NO_DEFAULT_PATH
    )

  FIND_PROGRAM(QT_UIC3_EXECUTABLE
    NAMES uic3
    PATHS ${QT_BINARY_DIR}
    NO_DEFAULT_PATH
    )

  FIND_PROGRAM(QT_RCC_EXECUTABLE 
    NAMES rcc
    PATHS ${QT_BINARY_DIR}
    NO_DEFAULT_PATH
    )

  FIND_PROGRAM(QT_DBUSCPP2XML_EXECUTABLE 
    NAMES qdbuscpp2xml
    PATHS ${QT_BINARY_DIR}
    NO_DEFAULT_PATH
    )

  FIND_PROGRAM(QT_DBUSXML2CPP_EXECUTABLE 
    NAMES qdbusxml2cpp
    PATHS ${QT_BINARY_DIR}
    NO_DEFAULT_PATH
    )

  FIND_PROGRAM(QT_LUPDATE_EXECUTABLE
    NAMES lupdate-qt4 lupdate
    PATHS ${QT_BINARY_DIR}
    NO_DEFAULT_PATH
    )

  FIND_PROGRAM(QT_LRELEASE_EXECUTABLE
    NAMES lrelease-qt4 lrelease
    PATHS ${QT_BINARY_DIR}
    NO_DEFAULT_PATH
    )

  FIND_PROGRAM(QT_QCOLLECTIONGENERATOR_EXECUTABLE
    NAMES qcollectiongenerator-qt4 qcollectiongenerator
    PATHS ${QT_BINARY_DIR}
    NO_DEFAULT_PATH
    )

  IF (QT_MOC_EXECUTABLE)
     SET(QT_WRAP_CPP "YES")
  ENDIF (QT_MOC_EXECUTABLE)

  IF (QT_UIC_EXECUTABLE)
     SET(QT_WRAP_UI "YES")
  ENDIF (QT_UIC_EXECUTABLE)



  MARK_AS_ADVANCED( QT_UIC_EXECUTABLE QT_UIC3_EXECUTABLE QT_MOC_EXECUTABLE
    QT_RCC_EXECUTABLE QT_DBUSXML2CPP_EXECUTABLE QT_DBUSCPP2XML_EXECUTABLE
    QT_LUPDATE_EXECUTABLE QT_LRELEASE_EXECUTABLE QT_QCOLLECTIONGENERATOR_EXECUTABLE)

  ######################################
  #
  #       Macros for building Qt files
  #
  ######################################

  MACRO (QT4_EXTRACT_OPTIONS _qt4_files _qt4_options)
    SET(${_qt4_files})
    SET(${_qt4_options})
    SET(_QT4_DOING_OPTIONS FALSE)
    FOREACH(_currentArg ${ARGN})
      IF ("${_currentArg}" STREQUAL "OPTIONS")
        SET(_QT4_DOING_OPTIONS TRUE)
      ELSE ("${_currentArg}" STREQUAL "OPTIONS")
        IF(_QT4_DOING_OPTIONS) 
          LIST(APPEND ${_qt4_options} "${_currentArg}")
        ELSE(_QT4_DOING_OPTIONS)
          LIST(APPEND ${_qt4_files} "${_currentArg}")
        ENDIF(_QT4_DOING_OPTIONS)
      ENDIF ("${_currentArg}" STREQUAL "OPTIONS")
    ENDFOREACH(_currentArg) 
  ENDMACRO (QT4_EXTRACT_OPTIONS)
  
  # macro used to create the names of output files preserving relative dirs
  MACRO (QT4_MAKE_OUTPUT_FILE infile prefix ext outfile )
    STRING(LENGTH ${CMAKE_CURRENT_BINARY_DIR} _binlength)
    STRING(LENGTH ${infile} _infileLength)
    SET(_checkinfile ${CMAKE_CURRENT_SOURCE_DIR})
    IF(_infileLength GREATER _binlength)
      STRING(SUBSTRING "${infile}" 0 ${_binlength} _checkinfile)
      IF(_checkinfile STREQUAL "${CMAKE_CURRENT_BINARY_DIR}")
        FILE(RELATIVE_PATH rel ${CMAKE_CURRENT_BINARY_DIR} ${infile})
      ELSE(_checkinfile STREQUAL "${CMAKE_CURRENT_BINARY_DIR}")
        FILE(RELATIVE_PATH rel ${CMAKE_CURRENT_SOURCE_DIR} ${infile})
      ENDIF(_checkinfile STREQUAL "${CMAKE_CURRENT_BINARY_DIR}")
    ELSE(_infileLength GREATER _binlength)
      FILE(RELATIVE_PATH rel ${CMAKE_CURRENT_SOURCE_DIR} ${infile})
    ENDIF(_infileLength GREATER _binlength)
    IF(WIN32 AND rel MATCHES "^[a-zA-Z]:") # absolute path 
      STRING(REGEX REPLACE "^([a-zA-Z]):(.*)$" "\\1_\\2" rel "${rel}")
    ENDIF(WIN32 AND rel MATCHES "^[a-zA-Z]:") 
    SET(_outfile "${CMAKE_CURRENT_BINARY_DIR}/${rel}")
    STRING(REPLACE ".." "__" _outfile ${_outfile})
    GET_FILENAME_COMPONENT(outpath ${_outfile} PATH)
    GET_FILENAME_COMPONENT(_outfile ${_outfile} NAME_WE)
    FILE(MAKE_DIRECTORY ${outpath})
    SET(${outfile} ${outpath}/${prefix}${_outfile}.${ext})
  ENDMACRO (QT4_MAKE_OUTPUT_FILE )

  MACRO (QT4_GET_MOC_FLAGS _moc_flags)
     SET(${_moc_flags})
     GET_DIRECTORY_PROPERTY(_inc_DIRS INCLUDE_DIRECTORIES)

     FOREACH(_current ${_inc_DIRS})
        IF("${_current}" MATCHES ".framework/?$")
          STRING(REGEX REPLACE "/[^/]+.framework" "" framework_path "${_current}")
          SET(${_moc_flags} ${${_moc_flags}} "-F${framework_path}")
        ELSE("${_current}" MATCHES ".framework/?$")
          SET(${_moc_flags} ${${_moc_flags}} "-I${_current}")
        ENDIF("${_current}" MATCHES ".framework/?$")
     ENDFOREACH(_current ${_inc_DIRS})
     
     GET_DIRECTORY_PROPERTY(_defines COMPILE_DEFINITIONS)
     FOREACH(_current ${_defines})
        SET(${_moc_flags} ${${_moc_flags}} "-D${_current}")
     ENDFOREACH(_current ${_defines})

     IF(Q_WS_WIN)
       SET(${_moc_flags} ${${_moc_flags}} -DWIN32)
     ENDIF(Q_WS_WIN)

  ENDMACRO(QT4_GET_MOC_FLAGS)

  # helper macro to set up a moc rule
  MACRO (QT4_CREATE_MOC_COMMAND infile outfile moc_flags moc_options)
    # For Windows, create a parameters file to work around command line length limit
    IF (WIN32)
      # Pass the parameters in a file.  Set the working directory to
      # be that containing the parameters file and reference it by
      # just the file name.  This is necessary because the moc tool on
      # MinGW builds does not seem to handle spaces in the path to the
      # file given with the @ syntax.
      GET_FILENAME_COMPONENT(_moc_outfile_name "${outfile}" NAME)
      GET_FILENAME_COMPONENT(_moc_outfile_dir "${outfile}" PATH)
      IF(_moc_outfile_dir)
        SET(_moc_working_dir WORKING_DIRECTORY ${_moc_outfile_dir})
      ENDIF(_moc_outfile_dir)
      SET (_moc_parameters_file ${outfile}_parameters)
      SET (_moc_parameters ${moc_flags} ${moc_options} -o "${outfile}" "${infile}")
      FILE (REMOVE ${_moc_parameters_file})
      FOREACH(arg ${_moc_parameters})
        FILE (APPEND ${_moc_parameters_file} "${arg}\n")
      ENDFOREACH(arg)
      ADD_CUSTOM_COMMAND(OUTPUT ${outfile}
                         COMMAND ${QT_MOC_EXECUTABLE} @${_moc_outfile_name}_parameters
                         DEPENDS ${infile}
                         ${_moc_working_dir}
                         VERBATIM)
    ELSE (WIN32)     
      ADD_CUSTOM_COMMAND(OUTPUT ${outfile}
                         COMMAND ${QT_MOC_EXECUTABLE}
                         ARGS ${moc_flags} ${moc_options} -o ${outfile} ${infile}
                         DEPENDS ${infile})     
    ENDIF (WIN32)
  ENDMACRO (QT4_CREATE_MOC_COMMAND)

  
  MACRO (QT4_GENERATE_MOC infile outfile )
  # get include dirs and flags
     QT4_GET_MOC_FLAGS(moc_flags)
     GET_FILENAME_COMPONENT(abs_infile ${infile} ABSOLUTE)
     QT4_CREATE_MOC_COMMAND(${abs_infile} ${outfile} "${moc_flags}" "")
     SET_SOURCE_FILES_PROPERTIES(${outfile} PROPERTIES SKIP_AUTOMOC TRUE)  # dont run automoc on this file
  ENDMACRO (QT4_GENERATE_MOC)


  # QT4_WRAP_CPP(outfiles inputfile ... )

  MACRO (QT4_WRAP_CPP outfiles )
    # get include dirs
    QT4_GET_MOC_FLAGS(moc_flags)
    QT4_EXTRACT_OPTIONS(moc_files moc_options ${ARGN})

    FOREACH (it ${moc_files})
      GET_FILENAME_COMPONENT(it ${it} ABSOLUTE)
      QT4_MAKE_OUTPUT_FILE(${it} moc_ cxx outfile)
      QT4_CREATE_MOC_COMMAND(${it} ${outfile} "${moc_flags}" "${moc_options}")
      SET(${outfiles} ${${outfiles}} ${outfile})
    ENDFOREACH(it)

  ENDMACRO (QT4_WRAP_CPP)


  # QT4_WRAP_UI(outfiles inputfile ... )

  MACRO (QT4_WRAP_UI outfiles )
    QT4_EXTRACT_OPTIONS(ui_files ui_options ${ARGN})

    FOREACH (it ${ui_files})
      GET_FILENAME_COMPONENT(outfile ${it} NAME_WE)
      GET_FILENAME_COMPONENT(infile ${it} ABSOLUTE)
      SET(outfile ${CMAKE_CURRENT_BINARY_DIR}/ui_${outfile}.h)
      ADD_CUSTOM_COMMAND(OUTPUT ${outfile}
        COMMAND ${QT_UIC_EXECUTABLE}
        ARGS ${ui_options} -o ${outfile} ${infile}
        MAIN_DEPENDENCY ${infile})
      SET(${outfiles} ${${outfiles}} ${outfile})
    ENDFOREACH (it)

  ENDMACRO (QT4_WRAP_UI)


  # QT4_ADD_RESOURCES(outfiles inputfile ... )

  MACRO (QT4_ADD_RESOURCES outfiles )
    QT4_EXTRACT_OPTIONS(rcc_files rcc_options ${ARGN})

    FOREACH (it ${rcc_files})
      GET_FILENAME_COMPONENT(outfilename ${it} NAME_WE)
      GET_FILENAME_COMPONENT(infile ${it} ABSOLUTE)
      GET_FILENAME_COMPONENT(rc_path ${infile} PATH)
      SET(outfile ${CMAKE_CURRENT_BINARY_DIR}/qrc_${outfilename}.cxx)
      #  parse file for dependencies 
      #  all files are absolute paths or relative to the location of the qrc file
      FILE(READ "${infile}" _RC_FILE_CONTENTS)
      STRING(REGEX MATCHALL "<file[^<]+" _RC_FILES "${_RC_FILE_CONTENTS}")
      SET(_RC_DEPENDS)
      FOREACH(_RC_FILE ${_RC_FILES})
        STRING(REGEX REPLACE "^<file[^>]*>" "" _RC_FILE "${_RC_FILE}")
        STRING(REGEX MATCH "^/|([A-Za-z]:/)" _ABS_PATH_INDICATOR "${_RC_FILE}")
        IF(NOT _ABS_PATH_INDICATOR)
          SET(_RC_FILE "${rc_path}/${_RC_FILE}")
        ENDIF(NOT _ABS_PATH_INDICATOR)
        SET(_RC_DEPENDS ${_RC_DEPENDS} "${_RC_FILE}")
      ENDFOREACH(_RC_FILE)
      ADD_CUSTOM_COMMAND(OUTPUT ${outfile}
        COMMAND ${QT_RCC_EXECUTABLE}
        ARGS ${rcc_options} -name ${outfilename} -o ${outfile} ${infile}
        MAIN_DEPENDENCY ${infile}
        DEPENDS ${_RC_DEPENDS})
      SET(${outfiles} ${${outfiles}} ${outfile})
    ENDFOREACH (it)

  ENDMACRO (QT4_ADD_RESOURCES)

  MACRO(QT4_ADD_DBUS_INTERFACE _sources _interface _basename)
    GET_FILENAME_COMPONENT(_infile ${_interface} ABSOLUTE)
    SET(_header ${CMAKE_CURRENT_BINARY_DIR}/${_basename}.h)
    SET(_impl   ${CMAKE_CURRENT_BINARY_DIR}/${_basename}.cpp)
    SET(_moc    ${CMAKE_CURRENT_BINARY_DIR}/${_basename}.moc)
  
    ADD_CUSTOM_COMMAND(OUTPUT ${_impl} ${_header}
        COMMAND ${QT_DBUSXML2CPP_EXECUTABLE} -m -p ${_basename} ${_infile}
        DEPENDS ${_infile})
  
    SET_SOURCE_FILES_PROPERTIES(${_impl} PROPERTIES SKIP_AUTOMOC TRUE)
    
    QT4_GENERATE_MOC(${_header} ${_moc})
  
    SET(${_sources} ${${_sources}} ${_impl} ${_header} ${_moc})
    MACRO_ADD_FILE_DEPENDENCIES(${_impl} ${_moc})
  
  ENDMACRO(QT4_ADD_DBUS_INTERFACE)
  
  
  MACRO(QT4_ADD_DBUS_INTERFACES _sources)
     FOREACH (_current_FILE ${ARGN})
        GET_FILENAME_COMPONENT(_infile ${_current_FILE} ABSOLUTE)
        # get the part before the ".xml" suffix
        STRING(REGEX REPLACE "(.*[/\\.])?([^\\.]+)\\.xml" "\\2" _basename ${_current_FILE})
        STRING(TOLOWER ${_basename} _basename)
        QT4_ADD_DBUS_INTERFACE(${_sources} ${_infile} ${_basename}interface)
     ENDFOREACH (_current_FILE)
  ENDMACRO(QT4_ADD_DBUS_INTERFACES)
  
  
  MACRO(QT4_GENERATE_DBUS_INTERFACE _header) # _customName OPTIONS -some -options )
    QT4_EXTRACT_OPTIONS(_customName _qt4_dbus_options ${ARGN})

    GET_FILENAME_COMPONENT(_in_file ${_header} ABSOLUTE)
    GET_FILENAME_COMPONENT(_basename ${_header} NAME_WE)
    
    IF (_customName)
      SET(_target ${CMAKE_CURRENT_BINARY_DIR}/${_customName})
    ELSE (_customName)
      SET(_target ${CMAKE_CURRENT_BINARY_DIR}/${_basename}.xml)
    ENDIF (_customName)
  
    ADD_CUSTOM_COMMAND(OUTPUT ${_target}
        COMMAND ${QT_DBUSCPP2XML_EXECUTABLE} ${_qt4_dbus_options} ${_in_file} -o ${_target}
        DEPENDS ${_in_file}
    )
  ENDMACRO(QT4_GENERATE_DBUS_INTERFACE)
  
  
  MACRO(QT4_ADD_DBUS_ADAPTOR _sources _xml_file _include _parentClass) # _optionalBasename _optionalClassName)
    GET_FILENAME_COMPONENT(_infile ${_xml_file} ABSOLUTE)
    
    SET(_optionalBasename "${ARGV4}")
    IF (_optionalBasename)
       SET(_basename ${_optionalBasename} )
    ELSE (_optionalBasename)
       STRING(REGEX REPLACE "(.*[/\\.])?([^\\.]+)\\.xml" "\\2adaptor" _basename ${_infile})
       STRING(TOLOWER ${_basename} _basename)
    ENDIF (_optionalBasename)

    SET(_optionalClassName "${ARGV5}")
    SET(_header ${CMAKE_CURRENT_BINARY_DIR}/${_basename}.h)
    SET(_impl   ${CMAKE_CURRENT_BINARY_DIR}/${_basename}.cpp)
    SET(_moc    ${CMAKE_CURRENT_BINARY_DIR}/${_basename}.moc)

    IF(_optionalClassName)
       ADD_CUSTOM_COMMAND(OUTPUT ${_impl} ${_header}
          COMMAND ${QT_DBUSXML2CPP_EXECUTABLE} -m -a ${_basename} -c ${_optionalClassName} -i ${_include} -l ${_parentClass} ${_infile}
          DEPENDS ${_infile}
        )
    ELSE(_optionalClassName)
       ADD_CUSTOM_COMMAND(OUTPUT ${_impl} ${_header}
          COMMAND ${QT_DBUSXML2CPP_EXECUTABLE} -m -a ${_basename} -i ${_include} -l ${_parentClass} ${_infile}
          DEPENDS ${_infile}
        )
    ENDIF(_optionalClassName)

    QT4_GENERATE_MOC(${_header} ${_moc})
    SET_SOURCE_FILES_PROPERTIES(${_impl} PROPERTIES SKIP_AUTOMOC TRUE)
    MACRO_ADD_FILE_DEPENDENCIES(${_impl} ${_moc})

    SET(${_sources} ${${_sources}} ${_impl} ${_header} ${_moc})
  ENDMACRO(QT4_ADD_DBUS_ADAPTOR)

   MACRO(QT4_AUTOMOC)
      QT4_GET_MOC_FLAGS(_moc_INCS)

      SET(_matching_FILES )
      FOREACH (_current_FILE ${ARGN})

         GET_FILENAME_COMPONENT(_abs_FILE ${_current_FILE} ABSOLUTE)
         # if "SKIP_AUTOMOC" is set to true, we will not handle this file here.
         # This is required to make uic work correctly:
         # we need to add generated .cpp files to the sources (to compile them),
         # but we cannot let automoc handle them, as the .cpp files don't exist yet when
         # cmake is run for the very first time on them -> however the .cpp files might
         # exist at a later run. at that time we need to skip them, so that we don't add two
         # different rules for the same moc file
         GET_SOURCE_FILE_PROPERTY(_skip ${_abs_FILE} SKIP_AUTOMOC)

         IF ( NOT _skip AND EXISTS ${_abs_FILE} )

            FILE(READ ${_abs_FILE} _contents)

            GET_FILENAME_COMPONENT(_abs_PATH ${_abs_FILE} PATH)

            STRING(REGEX MATCHALL "# *include +[^ ]+\\.moc[\">]" _match "${_contents}")
            IF(_match)
               FOREACH (_current_MOC_INC ${_match})
                  STRING(REGEX MATCH "[^ <\"]+\\.moc" _current_MOC "${_current_MOC_INC}")

                  GET_FILENAME_COMPONENT(_basename ${_current_MOC} NAME_WE)
                  IF(EXISTS ${_abs_PATH}/${_basename}.hpp)
                    SET(_header ${_abs_PATH}/${_basename}.hpp)
                  ELSE(EXISTS ${_abs_PATH}/${_basename}.hpp)
                    SET(_header ${_abs_PATH}/${_basename}.h)
                  ENDIF(EXISTS ${_abs_PATH}/${_basename}.hpp)
                  SET(_moc    ${CMAKE_CURRENT_BINARY_DIR}/${_current_MOC})
                  QT4_CREATE_MOC_COMMAND(${_header} ${_moc} "${_moc_INCS}" "")
                  MACRO_ADD_FILE_DEPENDENCIES(${_abs_FILE} ${_moc})
               ENDFOREACH (_current_MOC_INC)
            ENDIF(_match)
         ENDIF ( NOT _skip AND EXISTS ${_abs_FILE} )
      ENDFOREACH (_current_FILE)
   ENDMACRO(QT4_AUTOMOC)

   MACRO(QT4_CREATE_TRANSLATION _qm_files)
      QT4_EXTRACT_OPTIONS(_lupdate_files _lupdate_options ${ARGN})
      SET(_my_sources)
      SET(_my_dirs)
      SET(_my_tsfiles)
      SET(_ts_pro)
      FOREACH (_file ${_lupdate_files})
         GET_FILENAME_COMPONENT(_ext ${_file} EXT)
         GET_FILENAME_COMPONENT(_abs_FILE ${_file} ABSOLUTE)
         IF(_ext MATCHES "ts")
           LIST(APPEND _my_tsfiles ${_abs_FILE})
         ELSE(_ext MATCHES "ts")
           IF(NOT _ext)
             LIST(APPEND _my_dirs ${_abs_FILE})
           ELSE(NOT _ext)
             LIST(APPEND _my_sources ${_abs_FILE})
           ENDIF(NOT _ext)
         ENDIF(_ext MATCHES "ts")
      ENDFOREACH(_file)
      FOREACH(_ts_file ${_my_tsfiles})
        IF(_my_sources)
          # make a .pro file to call lupdate on, so we don't make our commands too
          # long for some systems
          GET_FILENAME_COMPONENT(_ts_name ${_ts_file} NAME_WE)
          SET(_ts_pro ${CMAKE_CURRENT_BINARY_DIR}${CMAKE_FILES_DIRECTORY}/${_ts_name}_lupdate.pro)
          SET(_pro_srcs)
          FOREACH(_pro_src ${_my_sources})
            SET(_pro_srcs "${_pro_srcs} \"${_pro_src}\"")
          ENDFOREACH(_pro_src ${_my_sources})
          FILE(WRITE ${_ts_pro} "SOURCES = ${_pro_srcs}")
        ENDIF(_my_sources)
        ADD_CUSTOM_COMMAND(OUTPUT ${_ts_file}
           COMMAND ${QT_LUPDATE_EXECUTABLE}
           ARGS ${_lupdate_options} ${_ts_pro} ${_my_dirs} -ts ${_ts_file}
           DEPENDS ${_my_sources} ${_ts_pro})
      ENDFOREACH(_ts_file)
      QT4_ADD_TRANSLATION(${_qm_files} ${_my_tsfiles})
   ENDMACRO(QT4_CREATE_TRANSLATION)

   MACRO(QT4_ADD_TRANSLATION _qm_files)
      FOREACH (_current_FILE ${ARGN})
         GET_FILENAME_COMPONENT(_abs_FILE ${_current_FILE} ABSOLUTE)
         GET_FILENAME_COMPONENT(qm ${_abs_FILE} NAME_WE)
         GET_SOURCE_FILE_PROPERTY(output_location ${_abs_FILE} OUTPUT_LOCATION)
         IF(output_location)
           FILE(MAKE_DIRECTORY "${output_location}")
           SET(qm "${output_location}/${qm}.qm")
         ELSE(output_location)
           SET(qm "${CMAKE_CURRENT_BINARY_DIR}/${qm}.qm")
         ENDIF(output_location)

         ADD_CUSTOM_COMMAND(OUTPUT ${qm}
            COMMAND ${QT_LRELEASE_EXECUTABLE}
            ARGS ${_abs_FILE} -qm ${qm}
            DEPENDS ${_abs_FILE}
         )
         SET(${_qm_files} ${${_qm_files}} ${qm})
      ENDFOREACH (_current_FILE)
   ENDMACRO(QT4_ADD_TRANSLATION)





  ######################################
  #
  #       decide if Qt got found
  #
  ######################################

  # if the includes,libraries,moc,uic and rcc are found then we have it
  IF( QT_LIBRARY_DIR AND QT_INCLUDE_DIR AND QT_MOC_EXECUTABLE AND 
      QT_UIC_EXECUTABLE AND QT_RCC_EXECUTABLE AND QT_QTCORE_LIBRARY)
    SET( QT4_FOUND "YES" )
    INCLUDE(FindPackageMessage)
    FIND_PACKAGE_MESSAGE(Qt4 "Found Qt-Version ${QTVERSION} (using ${QT_QMAKE_EXECUTABLE})"
      "[${QT_LIBRARY_DIR}][${QT_INCLUDE_DIR}][${QT_MOC_EXECUTABLE}][${QT_UIC_EXECUTABLE}][${QT_RCC_EXECUTABLE}]")
  ELSE( QT_LIBRARY_DIR AND QT_INCLUDE_DIR AND QT_MOC_EXECUTABLE AND
        QT_UIC_EXECUTABLE AND QT_RCC_EXECUTABLE AND QT_QTCORE_LIBRARY)
    SET( QT4_FOUND "NO")
    SET(QT_QMAKE_EXECUTABLE "${QT_QMAKE_EXECUTABLE}-NOTFOUND" CACHE FILEPATH "Invalid qmake found" FORCE)
    IF( Qt4_FIND_REQUIRED)
      MESSAGE( FATAL_ERROR "Qt libraries, includes, moc, uic or/and rcc NOT found!")
    ENDIF( Qt4_FIND_REQUIRED)
  ENDIF( QT_LIBRARY_DIR AND QT_INCLUDE_DIR AND QT_MOC_EXECUTABLE AND 
         QT_UIC_EXECUTABLE AND  QT_RCC_EXECUTABLE AND QT_QTCORE_LIBRARY)
  
  SET(QT_FOUND ${QT4_FOUND})


  ###############################################
  #
  #       configuration/system dependent settings  
  #
  ###############################################
  
  # find dependencies for some Qt modules
  # when doing builds against a static Qt, they are required
  # when doing builds against a shared Qt, they are sometimes not required
  # even some Linux distros do not require these dependencies
  # if a user needs the dependencies, and they couldn't be found, they can set
  # the variables themselves.

  SET(QT_QTGUI_LIB_DEPENDENCIES "")
  SET(QT_QTCORE_LIB_DEPENDENCIES "")
  SET(QT_QTNETWORK_LIB_DEPENDENCIES "")
  SET(QT_QTOPENGL_LIB_DEPENDENCIES "")
  SET(QT_QTDBUS_LIB_DEPENDENCIES "")
  SET(QT_QTHELP_LIB_DEPENDENCIES ${QT_QTCLUCENE_LIBRARY})
  
  # build using shared Qt needs -DQT_DLL
  IF(NOT QT_CONFIG MATCHES "static")
    # warning currently only qconfig.pri on Windows potentially contains "static"
    # so QT_DLL might not get defined properly on other platforms.
    SET(QT_DEFINITIONS ${QT_DEFINITIONS} -DQT_DLL)
  ENDIF(NOT QT_CONFIG MATCHES "static")
  
  # QtOpenGL dependencies
  QT_QUERY_QMAKE(QMAKE_LIBS_OPENGL "QMAKE_LIBS_OPENGL")
  SET (QT_QTOPENGL_LIB_DEPENDENCIES ${QT_QTOPENGL_LIB_DEPENDENCIES} ${QMAKE_LIBS_OPENGL})
  
  ## system png
  IF(QT_QCONFIG MATCHES "system-png")
    FIND_LIBRARY(QT_PNG_LIBRARY NAMES png)
    MARK_AS_ADVANCED(QT_PNG_LIBRARY)
    IF(QT_PNG_LIBRARY)
      SET(QT_QTGUI_LIB_DEPENDENCIES ${QT_QTGUI_LIB_DEPENDENCIES} ${QT_PNG_LIBRARY})
    ENDIF(QT_PNG_LIBRARY)
  ENDIF(QT_QCONFIG MATCHES "system-png")
  
  # for X11, get X11 library directory
  IF(Q_WS_X11)
    QT_QUERY_QMAKE(QMAKE_LIBDIR_X11 "QMAKE_LIBDIR_X11")
  ENDIF(Q_WS_X11)

  ## X11 SM
  IF(QT_QCONFIG MATCHES "x11sm")
    # ask qmake where the x11 libs are
    FIND_LIBRARY(QT_X11_SM_LIBRARY NAMES SM PATHS ${QMAKE_LIBDIR_X11})
    FIND_LIBRARY(QT_X11_ICE_LIBRARY NAMES ICE PATHS ${QMAKE_LIBDIR_X11})
    MARK_AS_ADVANCED(QT_X11_SM_LIBRARY)
    MARK_AS_ADVANCED(QT_X11_ICE_LIBRARY)
    IF(QT_X11_SM_LIBRARY AND QT_X11_ICE_LIBRARY)
      SET(QT_QTGUI_LIB_DEPENDENCIES ${QT_QTGUI_LIB_DEPENDENCIES} ${QT_X11_SM_LIBRARY} ${QT_X11_ICE_LIBRARY})
    ENDIF(QT_X11_SM_LIBRARY AND QT_X11_ICE_LIBRARY)
  ENDIF(QT_QCONFIG MATCHES "x11sm")
  
  ## Xi
  IF(QT_QCONFIG MATCHES "tablet")
    FIND_LIBRARY(QT_XI_LIBRARY NAMES Xi PATHS ${QMAKE_LIBDIR_X11})
    MARK_AS_ADVANCED(QT_XI_LIBRARY)
    IF(QT_XI_LIBRARY)
      SET(QT_QTGUI_LIB_DEPENDENCIES ${QT_QTGUI_LIB_DEPENDENCIES} ${QT_XI_LIBRARY})
    ENDIF(QT_XI_LIBRARY)
  ENDIF(QT_QCONFIG MATCHES "tablet")

  ## Xrender
  IF(QT_QCONFIG MATCHES "xrender")
    FIND_LIBRARY(QT_XRENDER_LIBRARY NAMES Xrender PATHS ${QMAKE_LIBDIR_X11})
    MARK_AS_ADVANCED(QT_XRENDER_LIBRARY)
    IF(QT_XRENDER_LIBRARY)
      SET(QT_QTGUI_LIB_DEPENDENCIES ${QT_QTGUI_LIB_DEPENDENCIES} ${QT_XRENDER_LIBRARY})
    ENDIF(QT_XRENDER_LIBRARY)
  ENDIF(QT_QCONFIG MATCHES "xrender")
  
  ## Xrandr
  IF(QT_QCONFIG MATCHES "xrandr")
    FIND_LIBRARY(QT_XRANDR_LIBRARY NAMES Xrandr PATHS ${QMAKE_LIBDIR_X11})
    MARK_AS_ADVANCED(QT_XRANDR_LIBRARY)
    IF(QT_XRANDR_LIBRARY)
      SET(QT_QTGUI_LIB_DEPENDENCIES ${QT_QTGUI_LIB_DEPENDENCIES} ${QT_XRANDR_LIBRARY})
    ENDIF(QT_XRANDR_LIBRARY)
  ENDIF(QT_QCONFIG MATCHES "xrandr")
  
  ## Xcursor
  IF(QT_QCONFIG MATCHES "xcursor")
    FIND_LIBRARY(QT_XCURSOR_LIBRARY NAMES Xcursor PATHS ${QMAKE_LIBDIR_X11})
    MARK_AS_ADVANCED(QT_XCURSOR_LIBRARY)
    IF(QT_XCURSOR_LIBRARY)
      SET(QT_QTGUI_LIB_DEPENDENCIES ${QT_QTGUI_LIB_DEPENDENCIES} ${QT_XCURSOR_LIBRARY})
    ENDIF(QT_XCURSOR_LIBRARY)
  ENDIF(QT_QCONFIG MATCHES "xcursor")
  
  ## Xinerama
  IF(QT_QCONFIG MATCHES "xinerama")
    FIND_LIBRARY(QT_XINERAMA_LIBRARY NAMES Xinerama PATHS ${QMAKE_LIBDIR_X11})
    MARK_AS_ADVANCED(QT_XINERAMA_LIBRARY)
    IF(QT_XINERAMA_LIBRARY)
      SET(QT_QTGUI_LIB_DEPENDENCIES ${QT_QTGUI_LIB_DEPENDENCIES} ${QT_XINERAMA_LIBRARY})
    ENDIF(QT_XINERAMA_LIBRARY)
  ENDIF(QT_QCONFIG MATCHES "xinerama")
  
  ## Xfixes
  IF(QT_QCONFIG MATCHES "xfixes")
    FIND_LIBRARY(QT_XFIXES_LIBRARY NAMES Xfixes PATHS ${QMAKE_LIBDIR_X11})
    MARK_AS_ADVANCED(QT_XFIXES_LIBRARY)
    IF(QT_XFIXES_LIBRARY)
      SET(QT_QTGUI_LIB_DEPENDENCIES ${QT_QTGUI_LIB_DEPENDENCIES} ${QT_XFIXES_LIBRARY})
    ENDIF(QT_XFIXES_LIBRARY)
  ENDIF(QT_QCONFIG MATCHES "xfixes")
  
  ## system-freetype
  IF(QT_QCONFIG MATCHES "system-freetype")
    FIND_LIBRARY(QT_FREETYPE_LIBRARY NAMES freetype)
    MARK_AS_ADVANCED(QT_FREETYPE_LIBRARY)
    IF(QT_FREETYPE_LIBRARY)
      SET(QT_QTGUI_LIB_DEPENDENCIES ${QT_QTGUI_LIB_DEPENDENCIES} ${QT_FREETYPE_LIBRARY})
    ENDIF(QT_FREETYPE_LIBRARY)
  ENDIF(QT_QCONFIG MATCHES "system-freetype")
  
  ## fontconfig
  IF(QT_QCONFIG MATCHES "fontconfig")
    FIND_LIBRARY(QT_FONTCONFIG_LIBRARY NAMES fontconfig)
    MARK_AS_ADVANCED(QT_FONTCONFIG_LIBRARY)
    IF(QT_FONTCONFIG_LIBRARY)
      SET(QT_QTGUI_LIB_DEPENDENCIES ${QT_QTGUI_LIB_DEPENDENCIES} ${QT_FONTCONFIG_LIBRARY})
    ENDIF(QT_FONTCONFIG_LIBRARY)
  ENDIF(QT_QCONFIG MATCHES "fontconfig")
  
  ## system-zlib
  IF(QT_QCONFIG MATCHES "system-zlib")
    FIND_LIBRARY(QT_ZLIB_LIBRARY NAMES z)
    MARK_AS_ADVANCED(QT_ZLIB_LIBRARY)
    IF(QT_ZLIB_LIBRARY)
      SET(QT_QTCORE_LIB_DEPENDENCIES ${QT_QTCORE_LIB_DEPENDENCIES} ${QT_ZLIB_LIBRARY})
    ENDIF(QT_ZLIB_LIBRARY)
  ENDIF(QT_QCONFIG MATCHES "system-zlib")

  ## openssl
  IF(NOT Q_WS_WIN)
    SET(_QT_NEED_OPENSSL 0)
    IF(QT_VERSION_MINOR LESS 4 AND QT_QCONFIG MATCHES "openssl")
      SET(_QT_NEED_OPENSSL 1)
    ENDIF(QT_VERSION_MINOR LESS 4 AND QT_QCONFIG MATCHES "openssl")
    IF(QT_VERSION_MINOR GREATER 3 AND QT_QCONFIG MATCHES "openssl-linked")
      SET(_QT_NEED_OPENSSL 1)
    ENDIF(QT_VERSION_MINOR GREATER 3 AND QT_QCONFIG MATCHES "openssl-linked")
    IF(_QT_NEED_OPENSSL)
      FIND_PACKAGE(OpenSSL)
      IF(OPENSSL_LIBRARIES)
        SET(QT_QTNETWORK_LIB_DEPENDENCIES ${QT_QTNETWORK_LIB_DEPENDENCIES} ${OPENSSL_LIBRARIES})
      ENDIF(OPENSSL_LIBRARIES)
    ENDIF(_QT_NEED_OPENSSL)
  ENDIF(NOT Q_WS_WIN)
  
  ## dbus
  IF(QT_QCONFIG MATCHES "dbus")

    # if the dbus library isn't found, we'll assume its not required to build
    # shared Qt on Linux doesn't require it
    IF(NOT QT_DBUS_LIBRARY)
      EXECUTE_PROCESS(COMMAND pkg-config --libs-only-L dbus-1
        OUTPUT_VARIABLE _dbus_query_output
        RESULT_VARIABLE _dbus_result
        ERROR_VARIABLE _dbus_query_output )
      
      IF(_dbus_result MATCHES 0)
        STRING(REPLACE "-L" "" _dbus_query_output "${_dbus_query_output}")
        SEPARATE_ARGUMENTS(_dbus_query_output)
      ELSE(_dbus_result MATCHES 0)
        SET(_dbus_query_output)
      ENDIF(_dbus_result MATCHES 0)

      FIND_LIBRARY(QT_DBUS_LIBRARY NAMES dbus-1 PATHS ${_dbus_query_output} )

      IF(QT_DBUS_LIBRARY)
        SET(QT_QTDBUS_LIB_DEPENDENCIES ${QT_QTDBUS_LIB_DEPENDENCIES} ${QT_DBUS_LIBRARY})
      ENDIF(QT_DBUS_LIBRARY)

      MARK_AS_ADVANCED(QT_DBUS_LIBRARY)
    ENDIF(NOT QT_DBUS_LIBRARY)

  ENDIF(QT_QCONFIG MATCHES "dbus")
  
  ## glib
  IF(QT_QCONFIG MATCHES "glib")
    
    # if the glib libraries aren't found, we'll assume its not required to build
    # shared Qt on Linux doesn't require it

    # Qt 4.2.0+ uses glib-2.0
    IF(NOT QT_GLIB_LIBRARY OR NOT QT_GTHREAD_LIBRARY)
      EXECUTE_PROCESS(COMMAND pkg-config --libs-only-L glib-2.0 gthread-2.0
        OUTPUT_VARIABLE _glib_query_output
        RESULT_VARIABLE _glib_result
        ERROR_VARIABLE _glib_query_output )

      IF(_glib_result MATCHES 0)
        STRING(REPLACE "-L" "" _glib_query_output "${_glib_query_output}")
        SEPARATE_ARGUMENTS(_glib_query_output)
      ELSE(_glib_result MATCHES 0)
        SET(_glib_query_output)
      ENDIF(_glib_result MATCHES 0)

      FIND_LIBRARY(QT_GLIB_LIBRARY NAMES glib-2.0 PATHS ${_glib_query_output} )
      FIND_LIBRARY(QT_GTHREAD_LIBRARY NAMES gthread-2.0 PATHS ${_glib_query_output} )
    
      MARK_AS_ADVANCED(QT_GLIB_LIBRARY)
      MARK_AS_ADVANCED(QT_GTHREAD_LIBRARY)
    ENDIF(NOT QT_GLIB_LIBRARY OR NOT QT_GTHREAD_LIBRARY)

    IF(QT_GLIB_LIBRARY AND QT_GTHREAD_LIBRARY)
      SET(QT_QTCORE_LIB_DEPENDENCIES ${QT_QTCORE_LIB_DEPENDENCIES}
          ${QT_GTHREAD_LIBRARY} ${QT_GLIB_LIBRARY})
    ENDIF(QT_GLIB_LIBRARY AND QT_GTHREAD_LIBRARY)


    # Qt 4.5+ also links to gobject-2.0
    IF(QT_VERSION_MINOR GREATER 4)
       IF(NOT QT_GOBJECT_LIBRARY)
         EXECUTE_PROCESS(COMMAND pkg-config --libs-only-L gobject-2.0
           OUTPUT_VARIABLE _glib_query_output
           RESULT_VARIABLE _glib_result
           ERROR_VARIABLE _glib_query_output )

         IF(_glib_result MATCHES 0)
           STRING(REPLACE "-L" "" _glib_query_output "${_glib_query_output}")
           SEPARATE_ARGUMENTS(_glib_query_output)
         ELSE(_glib_result MATCHES 0)
           SET(_glib_query_output)
         ENDIF(_glib_result MATCHES 0)

         FIND_LIBRARY(QT_GOBJECT_LIBRARY NAMES gobject-2.0 PATHS ${_glib_query_output} )
       
         MARK_AS_ADVANCED(QT_GOBJECT_LIBRARY)
       ENDIF(NOT QT_GOBJECT_LIBRARY)

       IF(QT_GOBJECT_LIBRARY)
         SET(QT_QTCORE_LIB_DEPENDENCIES ${QT_QTCORE_LIB_DEPENDENCIES}
             ${QT_GOBJECT_LIBRARY})
       ENDIF(QT_GOBJECT_LIBRARY)
    ENDIF(QT_VERSION_MINOR GREATER 4)

  ENDIF(QT_QCONFIG MATCHES "glib")
  
  ## clock-monotonic, just see if we need to link with rt
  IF(QT_QCONFIG MATCHES "clock-monotonic")
    SET(CMAKE_REQUIRED_LIBRARIES_SAVE ${CMAKE_REQUIRED_LIBRARIES})
    SET(CMAKE_REQUIRED_LIBRARIES rt)
    CHECK_SYMBOL_EXISTS(_POSIX_TIMERS "unistd.h;time.h" QT_POSIX_TIMERS)
    SET(CMAKE_REQUIRED_LIBRARIES ${CMAKE_REQUIRED_LIBRARIES_SAVE})
    IF(QT_POSIX_TIMERS)
      FIND_LIBRARY(QT_RT_LIBRARY NAMES rt)
      MARK_AS_ADVANCED(QT_RT_LIBRARY)
      IF(QT_RT_LIBRARY)
        SET(QT_QTCORE_LIB_DEPENDENCIES ${QT_QTCORE_LIB_DEPENDENCIES} ${QT_RT_LIBRARY})
      ENDIF(QT_RT_LIBRARY)
    ENDIF(QT_POSIX_TIMERS)
  ENDIF(QT_QCONFIG MATCHES "clock-monotonic")
    
  IF(Q_WS_X11)
    # X11 libraries Qt absolutely depends on
    QT_QUERY_QMAKE(QT_LIBS_X11 "QMAKE_LIBS_X11")
    SEPARATE_ARGUMENTS(QT_LIBS_X11)
    FOREACH(QT_X11_LIB ${QT_LIBS_X11})
      STRING(REGEX REPLACE "-l" "" QT_X11_LIB "${QT_X11_LIB}")
      SET(QT_TMP_STR "QT_X11_${QT_X11_LIB}_LIBRARY")
      FIND_LIBRARY(${QT_TMP_STR} NAMES "${QT_X11_LIB}" PATHS ${QMAKE_LIBDIR_X11})
      MARK_AS_ADVANCED(${QT_TMP_STR})
      IF(${QT_TMP_STR})
        SET(QT_QTGUI_LIB_DEPENDENCIES ${QT_QTGUI_LIB_DEPENDENCIES} ${${QT_TMP_STR}})
      ENDIF(${QT_TMP_STR})
    ENDFOREACH(QT_X11_LIB)

    QT_QUERY_QMAKE(QT_LIBS_THREAD "QMAKE_LIBS_THREAD")
    SET(QT_QTCORE_LIB_DEPENDENCIES ${QT_QTCORE_LIB_DEPENDENCIES} ${QT_LIBS_THREAD})
    
    QT_QUERY_QMAKE(QMAKE_LIBS_DYNLOAD "QMAKE_LIBS_DYNLOAD")
    SET (QT_QTCORE_LIB_DEPENDENCIES ${QT_QTCORE_LIB_DEPENDENCIES} ${QMAKE_LIBS_DYNLOAD})

  ENDIF(Q_WS_X11)
  
  IF(Q_WS_WIN)
    SET(QT_QTGUI_LIB_DEPENDENCIES ${QT_QTGUI_LIB_DEPENDENCIES} imm32 winmm)
    SET(QT_QTCORE_LIB_DEPENDENCIES ${QT_QTCORE_LIB_DEPENDENCIES} ws2_32)
  ENDIF(Q_WS_WIN)
  
  IF(Q_WS_MAC)
    SET(QT_QTGUI_LIB_DEPENDENCIES ${QT_QTGUI_LIB_DEPENDENCIES} "-framework Carbon")
    
    # Qt 4.0, 4.1, 4.2 use QuickTime
    IF(QT_VERSION_MINOR LESS 3)
      SET(QT_QTGUI_LIB_DEPENDENCIES ${QT_QTGUI_LIB_DEPENDENCIES} "-framework QuickTime")
    ENDIF(QT_VERSION_MINOR LESS 3)
    
    # Qt 4.2+ use AppKit
    IF(QT_VERSION_MINOR GREATER 1)
      SET(QT_QTGUI_LIB_DEPENDENCIES ${QT_QTGUI_LIB_DEPENDENCIES} "-framework AppKit")
    ENDIF(QT_VERSION_MINOR GREATER 1)

    SET(QT_QTCORE_LIB_DEPENDENCIES ${QT_QTCORE_LIB_DEPENDENCIES} "-framework ApplicationServices")
  ENDIF(Q_WS_MAC)

  #######################################
  #
  #       compatibility settings 
  #
  #######################################
  # Backwards compatibility for CMake1.4 and 1.2
  SET (QT_MOC_EXE ${QT_MOC_EXECUTABLE} )
  SET (QT_UIC_EXE ${QT_UIC_EXECUTABLE} )

  SET( QT_QT_LIBRARY "")

ELSE(QT4_QMAKE_FOUND)
   
   SET(QT_QMAKE_EXECUTABLE "${QT_QMAKE_EXECUTABLE}-NOTFOUND" CACHE FILEPATH "Invalid qmake found" FORCE)
   
   # The code below is overly complex to make sure we do not break compatibility with CMake 2.6.x
   # For CMake 2.8, it should be simplified by getting rid of QT4_INSTALLED_VERSION_TOO_OLD and 
   # QT4_INSTALLED_VERSION_TOO_NEW
   IF(Qt4_FIND_REQUIRED)
      IF(QT4_INSTALLED_VERSION_TOO_OLD)
    IF( Qt4_FIND_VERSION_EXACT )
      MESSAGE(FATAL_ERROR "The installed Qt version ${QTVERSION} is too old, version ${QT_MIN_VERSION} is required")
    ELSE( Qt4_FIND_VERSION_EXACT )
      MESSAGE(FATAL_ERROR "The installed Qt version ${QTVERSION} is too old, at least version ${QT_MIN_VERSION} is required")
    ENDIF( Qt4_FIND_VERSION_EXACT )
      ELSE(QT4_INSTALLED_VERSION_TOO_OLD)
      IF( Qt4_FIND_VERSION_EXACT AND QT4_INSTALLED_VERSION_TOO_NEW )
      MESSAGE(FATAL_ERROR "The installed Qt version ${QTVERSION} is too new, version ${QT_MIN_VERSION} is required")
    ELSE( Qt4_FIND_VERSION_EXACT AND QT4_INSTALLED_VERSION_TOO_NEW )
      MESSAGE( FATAL_ERROR "Qt qmake not found!")
    ENDIF( Qt4_FIND_VERSION_EXACT AND QT4_INSTALLED_VERSION_TOO_NEW )
      ENDIF(QT4_INSTALLED_VERSION_TOO_OLD)
   ELSE(Qt4_FIND_REQUIRED)
      IF(QT4_INSTALLED_VERSION_TOO_OLD AND NOT Qt4_FIND_QUIETLY)
         MESSAGE(STATUS "The installed Qt version ${QTVERSION} is too old, at least version ${QT_MIN_VERSION} is required")
      ENDIF(QT4_INSTALLED_VERSION_TOO_OLD AND NOT Qt4_FIND_QUIETLY)
   ENDIF(Qt4_FIND_REQUIRED)
 
ENDIF (QT4_QMAKE_FOUND)