path: root/Source/kwsys/CMakeLists.txt

#=============================================================================
#
#  Program:   KWSys - Kitware System Library
#  Module:    $RCSfile$
#
#  Copyright (c) Kitware, Inc., Insight Consortium.  All rights reserved.
#  See Copyright.txt or http://www.kitware.com/Copyright.htm for details.
#
#     This software is distributed WITHOUT ANY WARRANTY; without even
#     the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR
#     PURPOSE.  See the above copyright notices for more information.
#
#=============================================================================

# The Kitware System Library is intended to be included in other
# projects.  It is completely configurable in that the library's
# namespace can be configured and the components that are included can
# be selected invididually.

# Typical usage is to import the kwsys directory tree into a
# subdirectory under a parent project and enable the classes that will
# be used.  All classes are disabled by default.  The CMake listfile
# above this one configures the library as follows:
#
#  SET(KWSYS_NAMESPACE foosys)
#  SET(KWSYS_USE_Directory 1)    # Enable Directory class.
#  SUBDIRS(kwsys)
#
# Optional settings are as follows:
#
#  KWSYS_HEADER_ROOT = The directory into which to generate the kwsys headers.
#                      A directory called "${KWSYS_NAMESPACE}" will be
#                      created under this root directory to hold the files.
#
#    Example:
#
#      SET(KWSYS_HEADER_ROOT ${PROJECT_BINARY_DIR})
#      INCLUDE_DIRECTORIES(${PROJECT_BINARY_DIR})
#
#  KWSYS_IOS_FORCE_OLD = Force use of old non-ANSI C++ streams even if
#                        new streams are available.  This may be used
#                        by projects that cannot configure their
#                        streams library.
#    Example:
#
#      SET(KWSYS_IOS_FORCE_OLD 1)
#
#
# Optional settings to setup install rules work in one of two ways.
# The modern way utilizes the CMake 2.4 INSTALL command.  Settings
# for this mode are as follows:
#
#  KWSYS_INSTALL_BIN_DIR     = The installation target directories into
#  KWSYS_INSTALL_LIB_DIR       which the libraries and headers from
#  KWSYS_INSTALL_INCLUDE_DIR   kwsys should be installed by a "make install".
#                              The values should be specified relative to
#                              the installation prefix and NOT start with '/'.
#
#  KWSYS_INSTALL_COMPONENT_NAME_RUNTIME     = Name of runtime and development
#  KWSYS_INSTALL_COMPONENT_NAME_DEVELOPMENT   installation components.
#                                             If not given the install rules
#                                             will not be in any component.
#
#    Example:
#
#      SET(KWSYS_INSTALL_BIN_DIR bin)
#      SET(KWSYS_INSTALL_LIB_DIR lib)
#      SET(KWSYS_INSTALL_INCLUDE_DIR include)
#      SET(KWSYS_INSTALL_COMPONENT_NAME_RUNTIME Runtime)
#      SET(KWSYS_INSTALL_COMPONENT_NAME_DEVELOPMENT Development)
#
# The old way uses the original CMake INSTALL_* commands.  Settings
# for this mode are as follows:
#
#  KWSYS_LIBRARY_INSTALL_DIR = The installation target directories into
#  KWSYS_HEADER_INSTALL_DIR    which the libraries and headers from
#                              kwsys should be installed by a "make install".
#                              The values should be specified relative to
#                              the installation prefix and start with a '/'.
#    Example:
#
#      SET(KWSYS_LIBRARY_INSTALL_DIR /lib)
#      SET(KWSYS_HEADER_INSTALL_DIR /include)
#
# The modern way will be used whenever the INSTALL command is
# available.  If the settings are not available the old names will be
# used to construct them.  The old way will be used whenever the
# INSTALL command is not available.  If the settings are not available
# the new names will be used to construct them.

# Once configured, kwsys should be used as follows from C or C++ code:
#
#  #include <foosys/Directory.hxx>
#   ...
#  foosys::Directory directory;
#

# NOTE: This library is intended for internal use by Kitware-driven
# projects.  In order to keep it simple no attempt will be made to
# maintain backward compatibility when changes are made to KWSys.
# When an incompatible change is made Kitware's projects that use
# KWSys will be fixed, but no notification will necessarily be sent to
# any outside mailing list and no documentation of the change will be
# written.

#-----------------------------------------------------------------------------
# If a namespace is not specified, use "kwsys" and enable testing.
# This should be the case only when kwsys is not included inside
# another project and is being tested.
IF(NOT KWSYS_NAMESPACE)
  SET(KWSYS_NAMESPACE "kwsys")
  SET(KWSYS_STANDALONE 1)
ENDIF(NOT KWSYS_NAMESPACE)

#-----------------------------------------------------------------------------
# The project name is that of the specified namespace.
PROJECT(${KWSYS_NAMESPACE})

# Select library components.
IF(KWSYS_STANDALONE OR CMake_SOURCE_DIR)
  SET(KWSYS_ENABLE_C 1)

  # Enable all components.
  SET(KWSYS_USE_Base64 1)
  SET(KWSYS_USE_Directory 1)
  SET(KWSYS_USE_DynamicLoader 1)
  SET(KWSYS_USE_Glob 1)
  SET(KWSYS_USE_Process 1)
  SET(KWSYS_USE_RegularExpression 1)
  SET(KWSYS_USE_Registry 1)
  SET(KWSYS_USE_System 1)
  SET(KWSYS_USE_SystemTools 1)
  SET(KWSYS_USE_CommandLineArguments 1)
  SET(KWSYS_USE_FundamentalType 1)
  SET(KWSYS_USE_Terminal 1)
  SET(KWSYS_USE_IOStream 1)
ENDIF(KWSYS_STANDALONE OR CMake_SOURCE_DIR)

# Disable deprecation warnings for standard C and STL functions in
# VS2005 and later.
IF(KWSYS_STANDALONE)
  IF(MSVC80)
    ADD_DEFINITIONS(-D_CRT_SECURE_NO_DEPRECATE -D_CRT_NONSTDC_NO_DEPRECATE)
    ADD_DEFINITIONS(-D_SCL_SECURE_NO_DEPRECATE)
  ENDIF(MSVC80)
ENDIF(KWSYS_STANDALONE)

# Setup the large file support default.
IF(KWSYS_LFS_DISABLE)
  SET(KWSYS_LFS_REQUESTED 0)
ELSE(KWSYS_LFS_DISABLE)
  SET(KWSYS_LFS_REQUESTED 1)
ENDIF(KWSYS_LFS_DISABLE)

# Enable testing if building standalone.
IF(KWSYS_STANDALONE)
  INCLUDE(Dart)
  MARK_AS_ADVANCED(BUILD_TESTING DART_ROOT TCL_TCLSH)
  IF(BUILD_TESTING)
    ENABLE_TESTING()
  ENDIF(BUILD_TESTING)
ENDIF(KWSYS_STANDALONE)

# Include helper macros.
INCLUDE(${CMAKE_CURRENT_SOURCE_DIR}/kwsysPlatformTests.cmake)
INCLUDE(CheckTypeSize)

# Do full dependency headers.
INCLUDE_REGULAR_EXPRESSION("^.*$")

# Choose which kind of install commands to use.
IF(COMMAND INSTALL)
  # Use new KWSYS_INSTALL_*_DIR variable names to control installation.
  # Take defaults from the old names.  Note that there was no old name
  # for the bin dir, so we take the old lib dir name so DLLs will be
  # installed in a compatible way for old code.
  IF(NOT KWSYS_INSTALL_INCLUDE_DIR)
    STRING(REGEX REPLACE "^/" "" KWSYS_INSTALL_INCLUDE_DIR
      "${KWSYS_HEADER_INSTALL_DIR}")
  ENDIF(NOT KWSYS_INSTALL_INCLUDE_DIR)
  IF(NOT KWSYS_INSTALL_LIB_DIR)
    STRING(REGEX REPLACE "^/" "" KWSYS_INSTALL_LIB_DIR
      "${KWSYS_LIBRARY_INSTALL_DIR}")
  ENDIF(NOT KWSYS_INSTALL_LIB_DIR)
  IF(NOT KWSYS_INSTALL_BIN_DIR)
    STRING(REGEX REPLACE "^/" "" KWSYS_INSTALL_BIN_DIR
      "${KWSYS_LIBRARY_INSTALL_DIR}")
  ENDIF(NOT KWSYS_INSTALL_BIN_DIR)

  # Setup header install rules.
  SET(KWSYS_INSTALL_INCLUDE_OPTIONS)
  IF(KWSYS_INSTALL_COMPONENT_NAME_DEVELOPMENT)
    SET(KWSYS_INSTALL_INCLUDE_OPTIONS ${KWSYS_INSTALL_INCLUDE_OPTIONS}
      COMPONENT ${KWSYS_INSTALL_COMPONENT_NAME_DEVELOPMENT}
      )
  ENDIF(KWSYS_INSTALL_COMPONENT_NAME_DEVELOPMENT)

  # Setup library install rules.
  SET(KWSYS_INSTALL_LIBRARY_RULE)
  IF(KWSYS_INSTALL_LIB_DIR)
    # Install the shared library to the lib directory.
    SET(KWSYS_INSTALL_LIBRARY_RULE ${KWSYS_INSTALL_LIBRARY_RULE}
      LIBRARY DESTINATION ${KWSYS_INSTALL_LIB_DIR}
      )
    # Assign the shared library to the runtime component.
    IF(KWSYS_INSTALL_COMPONENT_NAME_RUNTIME)
      SET(KWSYS_INSTALL_LIBRARY_RULE ${KWSYS_INSTALL_LIBRARY_RULE}
        COMPONENT ${KWSYS_INSTALL_COMPONENT_NAME_RUNTIME}
        )
    ENDIF(KWSYS_INSTALL_COMPONENT_NAME_RUNTIME)

    # Install the archive to the lib directory.
    SET(KWSYS_INSTALL_LIBRARY_RULE ${KWSYS_INSTALL_LIBRARY_RULE}
      ARCHIVE DESTINATION ${KWSYS_INSTALL_LIB_DIR}
      )
    # Assign the archive to the development component.
    IF(KWSYS_INSTALL_COMPONENT_NAME_DEVELOPMENT)
      SET(KWSYS_INSTALL_LIBRARY_RULE ${KWSYS_INSTALL_LIBRARY_RULE}
        COMPONENT ${KWSYS_INSTALL_COMPONENT_NAME_DEVELOPMENT}
        )
    ENDIF(KWSYS_INSTALL_COMPONENT_NAME_DEVELOPMENT)
  ENDIF(KWSYS_INSTALL_LIB_DIR)
  IF(KWSYS_INSTALL_BIN_DIR)
    # Install the runtime library to the bin directory.
    SET(KWSYS_INSTALL_LIBRARY_RULE ${KWSYS_INSTALL_LIBRARY_RULE}
      RUNTIME DESTINATION ${KWSYS_INSTALL_BIN_DIR}
      )
    # Assign the runtime library to the runtime component.
    IF(KWSYS_INSTALL_COMPONENT_NAME_RUNTIME)
      SET(KWSYS_INSTALL_LIBRARY_RULE ${KWSYS_INSTALL_LIBRARY_RULE}
        COMPONENT ${KWSYS_INSTALL_COMPONENT_NAME_RUNTIME}
        )
    ENDIF(KWSYS_INSTALL_COMPONENT_NAME_RUNTIME)
  ENDIF(KWSYS_INSTALL_BIN_DIR)

  # Do not support old KWSYS_*_INSTALL_DIR variable names.
  SET(KWSYS_HEADER_INSTALL_DIR)
  SET(KWSYS_LIBRARY_INSTALL_DIR)

ELSE(COMMAND INSTALL)
  # Use old KWSYS_*_INSTALL_DIR variable names.
  # Take defaults from the new names.
  IF(KWSYS_INSTALL_LIB_DIR)
    IF(NOT KWSYS_LIBRARY_INSTALL_DIR)
      SET(KWSYS_LIBRARY_INSTALL_DIR "/${KWSYS_INSTALL_LIB_DIR}")
    ENDIF(NOT KWSYS_LIBRARY_INSTALL_DIR)
  ENDIF(KWSYS_INSTALL_LIB_DIR)
  IF(KWSYS_INSTALL_INCLUDE_DIR)
    IF(NOT KWSYS_HEADER_INSTALL_DIR)
      SET(KWSYS_HEADER_INSTALL_DIR "/${KWSYS_INSTALL_INCLUDE_DIR}")
    ENDIF(NOT KWSYS_HEADER_INSTALL_DIR)
  ENDIF(KWSYS_INSTALL_INCLUDE_DIR)

  # Do not support new KWSYS_INSTALL_*_DIR variable names.
  SET(KWSYS_INSTALL_BIN_DIR)
  SET(KWSYS_INSTALL_INCLUDE_DIR)
  SET(KWSYS_INSTALL_LIB_DIR)
ENDIF(COMMAND INSTALL)

# Work-around for CMake 1.6.7 bug in custom command dependencies when
# there is no executable output path.
IF(NOT EXECUTABLE_OUTPUT_PATH)
  SET(EXECUTABLE_OUTPUT_PATH "${PROJECT_BINARY_DIR}" CACHE PATH
      "Output directory for executables.")
ENDIF(NOT EXECUTABLE_OUTPUT_PATH)

# Generated source files will need this header.
STRING(COMPARE EQUAL "${PROJECT_SOURCE_DIR}" "${PROJECT_BINARY_DIR}"
  KWSYS_IN_SOURCE_BUILD)
IF(NOT KWSYS_IN_SOURCE_BUILD)
  CONFIGURE_FILE(${PROJECT_SOURCE_DIR}/kwsysPrivate.h
    ${PROJECT_BINARY_DIR}/kwsysPrivate.h COPY_ONLY IMMEDIATE)
ENDIF(NOT KWSYS_IN_SOURCE_BUILD)

#-----------------------------------------------------------------------------
# We require ANSI support from the C compiler.  Add any needed flags.
IF(CMAKE_ANSI_CFLAGS)
  SET(CMAKE_C_FLAGS "${CMAKE_C_FLAGS} ${CMAKE_ANSI_CFLAGS}")
ENDIF(CMAKE_ANSI_CFLAGS)

#-----------------------------------------------------------------------------
# Adjust compiler flags for some platforms.
IF(NOT CMAKE_COMPILER_IS_GNUCXX)
  IF(CMAKE_SYSTEM MATCHES "OSF1-V.*")
    STRING(REGEX MATCH "-timplicit_local"
      KWSYS_CXX_FLAGS_HAVE_IMPLICIT_LOCAL "${CMAKE_CXX_FLAGS}")
    STRING(REGEX MATCH "-no_implicit_include"
      KWSYS_CXX_FLAGS_HAVE_NO_IMPLICIT_INCLUDE "${CMAKE_CXX_FLAGS}")
    IF(NOT KWSYS_CXX_FLAGS_HAVE_IMPLICIT_LOCAL)
      SET(CMAKE_CXX_FLAGS "${CMAKE_CXX_FLAGS} -timplicit_local")
    ENDIF(NOT KWSYS_CXX_FLAGS_HAVE_IMPLICIT_LOCAL)
    IF(NOT KWSYS_CXX_FLAGS_HAVE_NO_IMPLICIT_INCLUDE)
      SET(CMAKE_CXX_FLAGS "${CMAKE_CXX_FLAGS} -no_implicit_include")
    ENDIF(NOT KWSYS_CXX_FLAGS_HAVE_NO_IMPLICIT_INCLUDE)
  ENDIF(CMAKE_SYSTEM MATCHES "OSF1-V.*")
  IF(CMAKE_SYSTEM MATCHES "HP-UX")
    SET(KWSYS_PLATFORM_CXX_TEST_EXTRA_FLAGS "+p")
  ENDIF(CMAKE_SYSTEM MATCHES "HP-UX")
ENDIF(NOT CMAKE_COMPILER_IS_GNUCXX)

#-----------------------------------------------------------------------------
# Configure Large File Support.
SET(KWSYS_LFS_AVAILABLE 0)
IF(KWSYS_LFS_REQUESTED)
  # Large File Support is requested.
  SET(KWSYS_LFS_REQUESTED 1)

  # Check for large file support.
  KWSYS_PLATFORM_CXX_TEST_RUN(KWSYS_LFS_WORKS
    "Checking for Large File Support" DIRECT)

  IF(KWSYS_LFS_WORKS)
    SET(KWSYS_LFS_AVAILABLE 1)
  ENDIF(KWSYS_LFS_WORKS)
ELSE(KWSYS_LFS_REQUESTED)
  # Large File Support is not requested.
  SET(KWSYS_LFS_REQUESTED 0)
ENDIF(KWSYS_LFS_REQUESTED)

#-----------------------------------------------------------------------------
# Configure the standard library header wrappers based on compiler's
# capabilities and parent project's request.  Enforce 0/1 as only
# possible values for configuration into Configure.hxx.

KWSYS_PLATFORM_CXX_TEST(KWSYS_STL_HAVE_STD
  "Checking whether STL classes are in std namespace" DIRECT)

IF(KWSYS_IOS_FORCE_OLD)
  SET(KWSYS_IOS_USE_ANSI 0)
ELSE(KWSYS_IOS_FORCE_OLD)
  KWSYS_PLATFORM_CXX_TEST(KWSYS_IOS_USE_ANSI
    "Checking whether ANSI stream headers are available" DIRECT)
ENDIF(KWSYS_IOS_FORCE_OLD)

IF(KWSYS_IOS_USE_ANSI)
  KWSYS_PLATFORM_CXX_TEST(KWSYS_IOS_HAVE_STD
    "Checking whether ANSI streams are in std namespace" DIRECT)
  KWSYS_PLATFORM_CXX_TEST(KWSYS_IOS_USE_SSTREAM
    "Checking whether ANSI string stream is available" DIRECT)
ELSE(KWSYS_IOS_USE_ANSI)
  SET(KWSYS_IOS_HAVE_STD 0)
  SET(KWSYS_IOS_USE_SSTREAM 0)
ENDIF(KWSYS_IOS_USE_ANSI)

IF(KWSYS_IOS_USE_SSTREAM)
  SET(KWSYS_IOS_USE_STRSTREAM_H 0)
  SET(KWSYS_IOS_USE_STRSTREA_H 0)
ELSE(KWSYS_IOS_USE_SSTREAM)
  KWSYS_PLATFORM_CXX_TEST(KWSYS_IOS_USE_STRSTREAM_H
    "Checking whether strstream.h is available" DIRECT)
  IF(KWSYS_IOS_USE_STRSTREAM_H)
    SET(KWSYS_IOS_USE_STRSTREA_H 0)
  ELSE(KWSYS_IOS_USE_STRSTREAM_H)
    KWSYS_PLATFORM_CXX_TEST(KWSYS_IOS_USE_STRSTREA_H
      "Checking whether strstrea.h is available" DIRECT)
  ENDIF(KWSYS_IOS_USE_STRSTREAM_H)
ENDIF(KWSYS_IOS_USE_SSTREAM)

KWSYS_PLATFORM_CXX_TEST(KWSYS_CXX_HAS_CSTDDEF
  "Checking whether header cstddef is available" DIRECT)

SET(KWSYS_PLATFORM_CXX_TEST_DEFINES
  -DKWSYS_STL_HAVE_STD=${KWSYS_STL_HAVE_STD})
KWSYS_PLATFORM_CXX_TEST(KWSYS_STL_STRING_HAVE_NEQ_CHAR
  "Checking whether stl string has operator!= for char*" DIRECT)
KWSYS_PLATFORM_CXX_TEST(KWSYS_STL_HAS_ITERATOR_TRAITS
  "Checking whether stl has iterator_traits" DIRECT)
IF(KWSYS_STL_HAS_ITERATOR_TRAITS)
  SET(KWSYS_STL_HAS_ITERATOR_CATEGORY 0)
  SET(KWSYS_STL_HAS___ITERATOR_CATEGORY 0)
ELSE(KWSYS_STL_HAS_ITERATOR_TRAITS)
  KWSYS_PLATFORM_CXX_TEST(KWSYS_STL_HAS_ITERATOR_CATEGORY
    "Checking whether stl has old iterator_category" DIRECT)
  IF(KWSYS_STL_HAS_ITERATOR_CATEGORY)
    SET(KWSYS_STL_HAS___ITERATOR_CATEGORY 0)
  ELSE(KWSYS_STL_HAS_ITERATOR_CATEGORY)
    KWSYS_PLATFORM_CXX_TEST(KWSYS_STL_HAS___ITERATOR_CATEGORY
      "Checking whether stl has internal __iterator_category" DIRECT)
  ENDIF(KWSYS_STL_HAS_ITERATOR_CATEGORY)
ENDIF(KWSYS_STL_HAS_ITERATOR_TRAITS)
KWSYS_PLATFORM_CXX_TEST(KWSYS_STL_HAS_ALLOCATOR_TEMPLATE
  "Checking whether stl has standard template allocator" DIRECT)
IF(KWSYS_STL_HAS_ALLOCATOR_TEMPLATE)
  SET(KWSYS_STL_HAS_ALLOCATOR_NONTEMPLATE 0)
  KWSYS_PLATFORM_CXX_TEST(KWSYS_STL_HAS_ALLOCATOR_REBIND
    "Checking for rebind member of stl allocator" DIRECT)
  KWSYS_PLATFORM_CXX_TEST(KWSYS_STL_HAS_ALLOCATOR_MAX_SIZE_ARGUMENT
    "Checking for non-standard argument to stl allocator<>::max_size" DIRECT)
ELSE(KWSYS_STL_HAS_ALLOCATOR_TEMPLATE)
  KWSYS_PLATFORM_CXX_TEST(KWSYS_STL_HAS_ALLOCATOR_NONTEMPLATE
    "Checking whether stl has old non-template allocator" DIRECT)
  SET(KWSYS_STL_HAS_ALLOCATOR_REBIND 0)
  SET(KWSYS_STL_HAS_ALLOCATOR_MAX_SIZE_ARGUMENT 0)
ENDIF(KWSYS_STL_HAS_ALLOCATOR_TEMPLATE)
KWSYS_PLATFORM_CXX_TEST(KWSYS_STL_HAS_ALLOCATOR_OBJECTS
  "Checking whether stl containers support allocator objects." DIRECT)
IF(KWSYS_IOS_USE_ANSI)
  # ANSI streams always have string operators.
  SET(KWSYS_STL_STRING_HAVE_OSTREAM 1)
  SET(KWSYS_STL_STRING_HAVE_ISTREAM 1)
ELSE(KWSYS_IOS_USE_ANSI)
  # There may not be string operators for old streams.
  KWSYS_PLATFORM_CXX_TEST(KWSYS_STL_STRING_HAVE_OSTREAM
    "Checking whether stl string has ostream operator<<" DIRECT)
  KWSYS_PLATFORM_CXX_TEST(KWSYS_STL_STRING_HAVE_ISTREAM
    "Checking whether stl string has istream operator>>" DIRECT)
ENDIF(KWSYS_IOS_USE_ANSI)
SET(KWSYS_PLATFORM_CXX_TEST_DEFINES)

KWSYS_PLATFORM_CXX_TEST(KWSYS_CXX_HAS_NULL_TEMPLATE_ARGS
  "Checking whether \"<>\" is needed for template friends" INVERT)
KWSYS_PLATFORM_CXX_TEST(KWSYS_CXX_HAS_MEMBER_TEMPLATES
  "Checking for member template support" DIRECT)
KWSYS_PLATFORM_CXX_TEST(KWSYS_CXX_HAS_FULL_SPECIALIZATION
  "Checking for standard template specialization syntax" DIRECT)
KWSYS_PLATFORM_CXX_TEST(KWSYS_CXX_HAS_ARGUMENT_DEPENDENT_LOOKUP
  "Checking whether argument dependent lookup is supported" DIRECT)

IF(UNIX)
  KWSYS_PLATFORM_CXX_TEST(KWSYS_STAT_HAS_ST_MTIM
    "Checking whether struct stat has st_mtim member" DIRECT)
ENDIF(UNIX)

IF(KWSYS_USE_FundamentalType)
  # Determine type sizes.
  CHECK_TYPE_SIZE("char"      KWSYS_SIZEOF_CHAR)
  CHECK_TYPE_SIZE("short"     KWSYS_SIZEOF_SHORT)
  CHECK_TYPE_SIZE("int"       KWSYS_SIZEOF_INT)
  CHECK_TYPE_SIZE("long"      KWSYS_SIZEOF_LONG)
  CHECK_TYPE_SIZE("long long" KWSYS_SIZEOF_LONG_LONG)
  CHECK_TYPE_SIZE("__int64"   KWSYS_SIZEOF___INT64)
  IF(NOT KWSYS_SIZEOF_LONG_LONG)
    SET(KWSYS_SIZEOF_LONG_LONG 0)
  ENDIF(NOT KWSYS_SIZEOF_LONG_LONG)
  IF(NOT KWSYS_SIZEOF___INT64)
    SET(KWSYS_SIZEOF___INT64 0)
  ENDIF(NOT KWSYS_SIZEOF___INT64)

  # Check uniqueness of types.
  IF(KWSYS_SIZEOF___INT64)
    KWSYS_PLATFORM_CXX_TEST(KWSYS_CXX_SAME_LONG_AND___INT64
      "Checking whether long and __int64 are the same type" DIRECT)
    IF(KWSYS_SIZEOF_LONG_LONG)
      KWSYS_PLATFORM_CXX_TEST(KWSYS_CXX_SAME_LONG_LONG_AND___INT64
        "Checking whether long long and __int64 are the same type" DIRECT)
    ENDIF(KWSYS_SIZEOF_LONG_LONG)
  ENDIF(KWSYS_SIZEOF___INT64)

  # Enable the "long long" type if it is available.  It is standard in
  # C99 and C++03 but not in earlier standards.
  IF(KWSYS_SIZEOF_LONG_LONG)
    SET(KWSYS_USE_LONG_LONG 1)
  ELSE(KWSYS_SIZEOF_LONG_LONG)
    SET(KWSYS_USE_LONG_LONG 0)
  ENDIF(KWSYS_SIZEOF_LONG_LONG)

  # Enable the "__int64" type if it is available and unique.  It is not
  # standard.
  SET(KWSYS_USE___INT64 0)
  IF(KWSYS_SIZEOF___INT64)
    IF(NOT KWSYS_CXX_SAME_LONG_AND___INT64)
      IF(NOT KWSYS_CXX_SAME_LONG_LONG_AND___INT64)
        SET(KWSYS_USE___INT64 1)
      ENDIF(NOT KWSYS_CXX_SAME_LONG_LONG_AND___INT64)
    ENDIF(NOT KWSYS_CXX_SAME_LONG_AND___INT64)
  ENDIF(KWSYS_SIZEOF___INT64)
  IF(KWSYS_USE___INT64)
    KWSYS_PLATFORM_CXX_TEST(KWSYS_CAN_CONVERT_UI64_TO_DOUBLE
      "Checking whether unsigned __int64 can convert to double" DIRECT)
  ELSE(KWSYS_USE___INT64)
    SET(KWSYS_CAN_CONVERT_UI64_TO_DOUBLE 1)
  ENDIF(KWSYS_USE___INT64)

  # Check signedness of "char" type.
  KWSYS_PLATFORM_CXX_TEST_RUN(KWSYS_CHAR_IS_SIGNED
    "Checking whether char is signed" DIRECT)
ENDIF(KWSYS_USE_FundamentalType)

IF(KWSYS_USE_IOStream)
  # Determine whether iostreams support long long.
  CHECK_TYPE_SIZE("long long" KWSYS_SIZEOF_LONG_LONG)
  IF(KWSYS_SIZEOF_LONG_LONG)
    SET(KWSYS_PLATFORM_CXX_TEST_DEFINES
      -DKWSYS_IOS_USE_ANSI=${KWSYS_IOS_USE_ANSI}
      -DKWSYS_IOS_HAVE_STD=${KWSYS_IOS_HAVE_STD})
    KWSYS_PLATFORM_CXX_TEST(KWSYS_IOS_HAS_ISTREAM_LONG_LONG
      "Checking if istream supports long long" DIRECT)
    KWSYS_PLATFORM_CXX_TEST(KWSYS_IOS_HAS_OSTREAM_LONG_LONG
      "Checking if ostream supports long long" DIRECT)
    SET(KWSYS_PLATFORM_CXX_TEST_DEFINES)
  ELSE(KWSYS_SIZEOF_LONG_LONG)
    SET(KWSYS_IOS_HAS_ISTREAM_LONG_LONG 0)
    SET(KWSYS_IOS_HAS_OSTREAM_LONG_LONG 0)
  ENDIF(KWSYS_SIZEOF_LONG_LONG)
ENDIF(KWSYS_USE_IOStream)

IF(KWSYS_NAMESPACE MATCHES "^kwsys$")
  SET(KWSYS_NAME_IS_KWSYS 1)
ELSE(KWSYS_NAMESPACE MATCHES "^kwsys$")
  SET(KWSYS_NAME_IS_KWSYS 0)
ENDIF(KWSYS_NAMESPACE MATCHES "^kwsys$")

# Choose default shared/static build if not specified.
IF(KWSYS_BUILD_SHARED MATCHES "^KWSYS_BUILD_SHARED$")
  SET(KWSYS_BUILD_SHARED ${BUILD_SHARED_LIBS})
ENDIF(KWSYS_BUILD_SHARED MATCHES "^KWSYS_BUILD_SHARED$")

IF(KWSYS_BUILD_SHARED)
  SET(KWSYS_BUILD_SHARED 1)
  SET(KWSYS_LIBRARY_TYPE SHARED)
ELSE(KWSYS_BUILD_SHARED)
  SET(KWSYS_BUILD_SHARED 0)
  SET(KWSYS_LIBRARY_TYPE STATIC)
ENDIF(KWSYS_BUILD_SHARED)

#-----------------------------------------------------------------------------
# Choose a directory for the generated headers.
IF(NOT KWSYS_HEADER_ROOT)
  SET(KWSYS_HEADER_ROOT "${PROJECT_BINARY_DIR}")
ENDIF(NOT KWSYS_HEADER_ROOT)
SET(KWSYS_HEADER_DIR "${KWSYS_HEADER_ROOT}/${KWSYS_NAMESPACE}")
INCLUDE_DIRECTORIES(${KWSYS_HEADER_ROOT})

#-----------------------------------------------------------------------------
# Create STL header wrappers to block warnings in the STL headers and
# give standard names by which they may be included.
SET(KWSYS_STL_HEADER_EXTRA_string 1)
FOREACH(header
  algorithm
  deque
  exception
  functional
  iterator
  list
  map
  memory
  new
  numeric
  queue
  set
  stack
  stdexcept
  string
  utility
  vector
  )
  # Configure the header wrapper.
  SET(KWSYS_STL_HEADER "${header}")
  IF(KWSYS_STL_HEADER_EXTRA_${header})
    SET(KWSYS_STL_HEADER_EXTRA
      "#define ${KWSYS_NAMESPACE}_stl_${header}_including_hxx\n# include <${KWSYS_NAMESPACE}/stl/${header}.hxx>\n#undef ${KWSYS_NAMESPACE}_stl_${header}_including_hxx\n")
    CONFIGURE_FILE(${PROJECT_SOURCE_DIR}/kwsys_stl_${header}.hxx.in
                   ${KWSYS_HEADER_DIR}/stl/${header}.hxx
                   @ONLY IMMEDIATE)
    IF(KWSYS_INSTALL_INCLUDE_DIR)
      INSTALL(FILES ${KWSYS_HEADER_DIR}/stl/${header}.hxx
        DESTINATION ${KWSYS_INSTALL_INCLUDE_DIR}/${KWSYS_NAMESPACE}/stl
        ${KWSYS_INSTALL_INCLUDE_OPTIONS})
    ENDIF(KWSYS_INSTALL_INCLUDE_DIR)
    IF(KWSYS_HEADER_INSTALL_DIR)
      INSTALL_FILES(${KWSYS_HEADER_INSTALL_DIR}/${KWSYS_NAMESPACE}/stl
        FILES ${KWSYS_HEADER_DIR}/stl/${header}.hxx)
    ENDIF(KWSYS_HEADER_INSTALL_DIR)
  ELSE(KWSYS_STL_HEADER_EXTRA_${header})
    SET(KWSYS_STL_HEADER_EXTRA "")
  ENDIF(KWSYS_STL_HEADER_EXTRA_${header})
  CONFIGURE_FILE(${PROJECT_SOURCE_DIR}/kwsys_stl.hxx.in
                 ${KWSYS_HEADER_DIR}/stl/${header}
                 @ONLY IMMEDIATE)

  # Create an install target for the header wrapper.
  IF(KWSYS_INSTALL_INCLUDE_DIR)
    INSTALL(FILES ${KWSYS_HEADER_DIR}/stl/${header}
      DESTINATION ${KWSYS_INSTALL_INCLUDE_DIR}/${KWSYS_NAMESPACE}/stl
      ${KWSYS_INSTALL_INCLUDE_OPTIONS})
  ENDIF(KWSYS_INSTALL_INCLUDE_DIR)
  IF(KWSYS_HEADER_INSTALL_DIR)
    INSTALL_FILES(${KWSYS_HEADER_INSTALL_DIR}/${KWSYS_NAMESPACE}/stl
      FILES ${KWSYS_HEADER_DIR}/stl/${header})
  ENDIF(KWSYS_HEADER_INSTALL_DIR)
ENDFOREACH(header)

# Provide cstddef header.
CONFIGURE_FILE(${PROJECT_SOURCE_DIR}/kwsys_cstddef.hxx.in
               ${KWSYS_HEADER_DIR}/cstddef
               @ONLY IMMEDIATE)

#-----------------------------------------------------------------------------
# Create streams header wrappers to give standard names by which they
# may be included.
FOREACH(header iostream fstream sstream iosfwd)
  # Configure the header wrapper.
  CONFIGURE_FILE(${PROJECT_SOURCE_DIR}/kwsys_ios_${header}.h.in
                 ${KWSYS_HEADER_DIR}/ios/${header}
                 @ONLY IMMEDIATE)

  # Create an install target for the header wrapper.
  IF(KWSYS_INSTALL_INCLUDE_DIR)
    INSTALL(FILES ${KWSYS_HEADER_DIR}/ios/${header}
      DESTINATION ${KWSYS_INSTALL_INCLUDE_DIR}/${KWSYS_NAMESPACE}/ios
      ${KWSYS_INSTALL_INCLUDE_OPTIONS})
  ENDIF(KWSYS_INSTALL_INCLUDE_DIR)
  IF(KWSYS_HEADER_INSTALL_DIR)
    INSTALL_FILES(${KWSYS_HEADER_INSTALL_DIR}/${KWSYS_NAMESPACE}/ios
      FILES ${KWSYS_HEADER_DIR}/ios/${header})
  ENDIF(KWSYS_HEADER_INSTALL_DIR)
ENDFOREACH(header)

#-----------------------------------------------------------------------------
# Build a list of classes and headers we need to implement the
# selected components.  Initialize with required components.
SET(KWSYS_CLASSES)
SET(KWSYS_H_FILES Configure SharedForward)
SET(KWSYS_HXX_FILES Configure String
  hashtable hash_fun hash_map hash_set
  auto_ptr
  )

# Enforce component dependencies.
IF(KWSYS_USE_SystemTools)
  SET(KWSYS_USE_Directory 1)
ENDIF(KWSYS_USE_SystemTools)
IF(KWSYS_USE_Glob)
  SET(KWSYS_USE_Directory 1)
  SET(KWSYS_USE_SystemTools 1)
  SET(KWSYS_USE_RegularExpression 1)
ENDIF(KWSYS_USE_Glob)
IF(KWSYS_USE_Process)
  SET(KWSYS_USE_System 1)
ENDIF(KWSYS_USE_Process)

# Add selected C++ classes.
SET(cppclasses
  Directory DynamicLoader Glob RegularExpression SystemTools
  CommandLineArguments Registry IOStream
  )
FOREACH(cpp ${cppclasses})
  IF(KWSYS_USE_${cpp})
    SET(KWSYS_CLASSES ${KWSYS_CLASSES} ${cpp})
  ENDIF(KWSYS_USE_${cpp})
ENDFOREACH(cpp)

# Add selected C components.
FOREACH(c Process Base64 FundamentalType Terminal System)
  IF(KWSYS_USE_${c})
    SET(KWSYS_H_FILES ${KWSYS_H_FILES} ${c})
  ENDIF(KWSYS_USE_${c})
ENDFOREACH(c)

#-----------------------------------------------------------------------------
# Build a list of sources for the library based on components that are
# included.
SET(KWSYS_C_SRCS)
SET(KWSYS_CXX_SRCS)

# Add the proper sources for this platform's Process implementation.
IF(KWSYS_USE_Process)
  IF(NOT UNIX)
    # Use the Windows implementation.  We need the encoded forwarding executable.
    SET(KWSYS_C_SRCS ${KWSYS_C_SRCS} ProcessWin32.c
      ${PROJECT_BINARY_DIR}/${KWSYS_NAMESPACE}ProcessFwd9xEnc.c)
    SET_SOURCE_FILES_PROPERTIES(
      ${PROJECT_BINARY_DIR}/${KWSYS_NAMESPACE}ProcessFwd9xEnc.c
      PROPERTIES GENERATED 1)
  ELSE(NOT UNIX)
    # Use the UNIX implementation.
    SET(KWSYS_C_SRCS ${KWSYS_C_SRCS} ProcessUNIX.c)

    # Help ProcessUNIX.c compile properly on all platforms.
    KWSYS_PLATFORM_C_TEST(KWSYS_C_HAS_PTRDIFF_T
      "Checking whether C compiler has ptrdiff_t in stddef.h" DIRECT)
    KWSYS_PLATFORM_C_TEST(KWSYS_C_HAS_SSIZE_T
      "Checking whether C compiler has ssize_t in unistd.h" DIRECT)
    SET_SOURCE_FILES_PROPERTIES(ProcessUNIX.c PROPERTIES
      COMPILE_FLAGS "-DKWSYS_C_HAS_PTRDIFF_T=${KWSYS_C_HAS_PTRDIFF_T} -DKWSYS_C_HAS_SSIZE_T=${KWSYS_C_HAS_SSIZE_T}"
      )
  ENDIF(NOT UNIX)
ENDIF(KWSYS_USE_Process)

# Add selected C sources.
FOREACH(c Base64 Terminal System)
  IF(KWSYS_USE_${c})
    SET(KWSYS_C_SRCS ${KWSYS_C_SRCS} ${c}.c)
  ENDIF(KWSYS_USE_${c})
ENDFOREACH(c)

# Configure headers of C++ classes and construct the list of sources.
FOREACH(c ${KWSYS_CLASSES})
  # Add this source to the list of source files for the library.
  SET(KWSYS_CXX_SRCS ${KWSYS_CXX_SRCS} ${c}.cxx)

  # Configure the header for this class.
  CONFIGURE_FILE(${PROJECT_SOURCE_DIR}/${c}.hxx.in ${KWSYS_HEADER_DIR}/${c}.hxx
                 @ONLY IMMEDIATE)

  # Create an install target for the header.
  IF(KWSYS_INSTALL_INCLUDE_DIR)
    INSTALL(FILES ${KWSYS_HEADER_DIR}/${c}.hxx
      DESTINATION ${KWSYS_INSTALL_INCLUDE_DIR}/${KWSYS_NAMESPACE}
      ${KWSYS_INSTALL_INCLUDE_OPTIONS})
  ENDIF(KWSYS_INSTALL_INCLUDE_DIR)
  IF(KWSYS_HEADER_INSTALL_DIR)
    INSTALL_FILES(${KWSYS_HEADER_INSTALL_DIR}/${KWSYS_NAMESPACE}
                  FILES  ${KWSYS_HEADER_DIR}/${c}.hxx)
  ENDIF(KWSYS_HEADER_INSTALL_DIR)
ENDFOREACH(c)

# Configure C headers.
FOREACH(h ${KWSYS_H_FILES})
  # Configure the header into the given directory.
  CONFIGURE_FILE(${PROJECT_SOURCE_DIR}/${h}.h.in ${KWSYS_HEADER_DIR}/${h}.h
                 @ONLY IMMEDIATE)

  # Create an install target for the header.
  IF(KWSYS_INSTALL_INCLUDE_DIR)
    INSTALL(FILES ${KWSYS_HEADER_DIR}/${h}.h
      DESTINATION ${KWSYS_INSTALL_INCLUDE_DIR}/${KWSYS_NAMESPACE}
      ${KWSYS_INSTALL_INCLUDE_OPTIONS})
  ENDIF(KWSYS_INSTALL_INCLUDE_DIR)
  IF(KWSYS_HEADER_INSTALL_DIR)
    INSTALL_FILES(${KWSYS_HEADER_INSTALL_DIR}/${KWSYS_NAMESPACE}
                  FILES  ${KWSYS_HEADER_DIR}/${h}.h)
  ENDIF(KWSYS_HEADER_INSTALL_DIR)
ENDFOREACH(h)

# Configure other C++ headers.
FOREACH(h ${KWSYS_HXX_FILES})
  # Configure the header into the given directory.
  CONFIGURE_FILE(${PROJECT_SOURCE_DIR}/${h}.hxx.in ${KWSYS_HEADER_DIR}/${h}.hxx
                 @ONLY IMMEDIATE)

  # Create an install target for the header.
  IF(KWSYS_INSTALL_INCLUDE_DIR)
    INSTALL(FILES ${KWSYS_HEADER_DIR}/${h}.hxx
      DESTINATION ${KWSYS_INSTALL_INCLUDE_DIR}/${KWSYS_NAMESPACE}
      ${KWSYS_INSTALL_INCLUDE_OPTIONS})
  ENDIF(KWSYS_INSTALL_INCLUDE_DIR)
  IF(KWSYS_HEADER_INSTALL_DIR)
    INSTALL_FILES(${KWSYS_HEADER_INSTALL_DIR}/${KWSYS_NAMESPACE}
                  FILES  ${KWSYS_HEADER_DIR}/${h}.hxx)
  ENDIF(KWSYS_HEADER_INSTALL_DIR)
ENDFOREACH(h)

#-----------------------------------------------------------------------------
# Add the library with the configured name and list of sources.
IF(KWSYS_C_SRCS OR KWSYS_CXX_SRCS)
  ADD_LIBRARY(${KWSYS_NAMESPACE} ${KWSYS_LIBRARY_TYPE}
    ${KWSYS_C_SRCS} ${KWSYS_CXX_SRCS})
  IF(KWSYS_USE_DynamicLoader)
    IF(UNIX)
      TARGET_LINK_LIBRARIES(${KWSYS_NAMESPACE} ${CMAKE_DL_LIBS})
    ENDIF(UNIX)
  ENDIF(KWSYS_USE_DynamicLoader)

  # Apply user-defined target properties to the library.
  IF(KWSYS_PROPERTIES_CXX)
    SET_TARGET_PROPERTIES(${KWSYS_NAMESPACE} PROPERTIES
      ${KWSYS_PROPERTIES_CXX}
      )
  ENDIF(KWSYS_PROPERTIES_CXX)

  # Create an install target for the library.
  IF(KWSYS_INSTALL_LIBRARY_RULE)
    INSTALL(TARGETS ${KWSYS_NAMESPACE} ${KWSYS_INSTALL_LIBRARY_RULE})
  ENDIF(KWSYS_INSTALL_LIBRARY_RULE)
  IF(KWSYS_LIBRARY_INSTALL_DIR)
    INSTALL_TARGETS(${KWSYS_LIBRARY_INSTALL_DIR} ${KWSYS_NAMESPACE})
  ENDIF(KWSYS_LIBRARY_INSTALL_DIR)
ENDIF(KWSYS_C_SRCS OR KWSYS_CXX_SRCS)

# Add a C-only library if requested.
IF(KWSYS_ENABLE_C AND KWSYS_C_SRCS)
  ADD_LIBRARY(${KWSYS_NAMESPACE}_c ${KWSYS_LIBRARY_TYPE} ${KWSYS_C_SRCS})

  # Apply user-defined target properties to the library.
  IF(KWSYS_PROPERTIES_C)
    SET_TARGET_PROPERTIES(${KWSYS_NAMESPACE} PROPERTIES
      ${KWSYS_PROPERTIES_C}
      )
  ENDIF(KWSYS_PROPERTIES_C)

  # Create an install target for the library.
  IF(KWSYS_INSTALL_LIBRARY_RULE)
    INSTALL(TARGETS ${KWSYS_NAMESPACE}_c ${KWSYS_INSTALL_LIBRARY_RULE})
  ENDIF(KWSYS_INSTALL_LIBRARY_RULE)
  IF(KWSYS_LIBRARY_INSTALL_DIR)
    INSTALL_TARGETS(${KWSYS_LIBRARY_INSTALL_DIR} ${KWSYS_NAMESPACE}_c)
  ENDIF(KWSYS_LIBRARY_INSTALL_DIR)
ENDIF(KWSYS_ENABLE_C AND KWSYS_C_SRCS)

# For building kwsys itself, we use a macro defined on the command
# line to configure the namespace in the C and C++ source files.
ADD_DEFINITIONS("-DKWSYS_NAMESPACE=${KWSYS_NAMESPACE}")

#-----------------------------------------------------------------------------
# Process execution on windows needs to build a forwarding executable
# that works around a Win9x bug.  We encode the executable into a C
# file and build it into the library.  Win9x platforms reproduce the
# executable into a temporary directory when it is needed.
IF(KWSYS_USE_Process)
  IF(NOT UNIX)
    # Build the forwarding executable itself and a program that will
    # encode it into a C file.
    ADD_EXECUTABLE(${KWSYS_NAMESPACE}ProcessFwd9x ProcessFwd9x.c)
    ADD_EXECUTABLE(${KWSYS_NAMESPACE}EncodeExecutable EncodeExecutable.c)

    # Construct the location of the executable to be encoded.
    SET(BIN_DIR ${CMAKE_CURRENT_BINARY_DIR})
    IF(EXECUTABLE_OUTPUT_PATH)
      SET(BIN_DIR ${EXECUTABLE_OUTPUT_PATH})
    ENDIF(EXECUTABLE_OUTPUT_PATH)

    SET(CFG_INTDIR "/${CMAKE_CFG_INTDIR}")
    IF(CMAKE_BUILD_TOOL MATCHES "make")
      SET(CFG_INTDIR "")
    ENDIF(CMAKE_BUILD_TOOL MATCHES "make")

    # Take advantage of a better custom command syntax if possible.
    SET(CMD ${BIN_DIR}${CFG_INTDIR}/${KWSYS_NAMESPACE}EncodeExecutable.exe)
    SET(FWD ${BIN_DIR}${CFG_INTDIR}/${KWSYS_NAMESPACE}ProcessFwd9x.exe)
    IF("${CMAKE_MAJOR_VERSION}.${CMAKE_MINOR_VERSION}" GREATER 1.6)
      ADD_CUSTOM_COMMAND(
        OUTPUT ${CMAKE_CURRENT_BINARY_DIR}/${KWSYS_NAMESPACE}ProcessFwd9xEnc.c
        COMMAND ${CMD}
        ARGS ${FWD} ${CMAKE_CURRENT_BINARY_DIR}/${KWSYS_NAMESPACE}ProcessFwd9xEnc.c
             ${KWSYS_NAMESPACE} ProcessFwd9x
        DEPENDS ${CMD} ${FWD})
    ELSE("${CMAKE_MAJOR_VERSION}.${CMAKE_MINOR_VERSION}" GREATER 1.6)
      ADD_CUSTOM_COMMAND(
        TARGET ${KWSYS_NAMESPACE}
        SOURCE ${CMAKE_CURRENT_SOURCE_DIR}/ProcessFwd9x.c
        COMMAND ${CMD}
        ARGS ${FWD} ${CMAKE_CURRENT_BINARY_DIR}/${KWSYS_NAMESPACE}ProcessFwd9xEnc.c
             ${KWSYS_NAMESPACE} ProcessFwd9x
        OUTPUTS ${CMAKE_CURRENT_BINARY_DIR}/${KWSYS_NAMESPACE}ProcessFwd9xEnc.c
        DEPENDS ${CMD} ${FWD})
    ENDIF("${CMAKE_MAJOR_VERSION}.${CMAKE_MINOR_VERSION}" GREATER 1.6)

    # Make sure build occurs in proper order.
    ADD_DEPENDENCIES(${KWSYS_NAMESPACE} ${KWSYS_NAMESPACE}ProcessFwd9x
                     ${KWSYS_NAMESPACE}EncodeExecutable)
  ENDIF(NOT UNIX)
ENDIF(KWSYS_USE_Process)

#-----------------------------------------------------------------------------
# Setup testing if not being built as part of another project.
IF(KWSYS_STANDALONE OR CMake_SOURCE_DIR)
  IF(BUILD_TESTING)
    # Compute the location of executables.
    SET(EXEC_DIR "${CMAKE_CURRENT_BINARY_DIR}")
    IF(EXECUTABLE_OUTPUT_PATH)
      SET(EXEC_DIR "${EXECUTABLE_OUTPUT_PATH}")
    ENDIF(EXECUTABLE_OUTPUT_PATH)

    # C tests
    SET(KWSYS_C_TESTS
      testTerminal
      )
    IF(COMMAND SET_TESTS_PROPERTIES AND COMMAND GET_TEST_PROPERTY AND KWSYS_STANDALONE)
      SET(KWSYS_C_TESTS ${KWSYS_C_TESTS} testFail)
    ENDIF(COMMAND SET_TESTS_PROPERTIES AND COMMAND GET_TEST_PROPERTY AND KWSYS_STANDALONE)
    CREATE_TEST_SOURCELIST(
      KWSYS_C_TEST_SRCS ${KWSYS_NAMESPACE}TestsC.c
      ${KWSYS_C_TESTS}
      )
    ADD_EXECUTABLE(${KWSYS_NAMESPACE}TestsC ${KWSYS_C_TEST_SRCS})
    TARGET_LINK_LIBRARIES(${KWSYS_NAMESPACE}TestsC ${KWSYS_NAMESPACE}_c)
    FOREACH(test ${KWSYS_C_TESTS})
      ADD_TEST(kwsys.${test} ${EXEC_DIR}/${KWSYS_NAMESPACE}TestsC ${test} ${KWSYS_TEST_ARGS_${test}})
    ENDFOREACH(test)

    # C++ tests
    SET(KWSYS_CXX_TESTS
      #      testAutoPtr
      testHashSTL
      testRegistry
      testIOS
      testSystemTools
      testCommandLineArguments
      testCommandLineArguments1
      )
    IF(KWSYS_USE_DynamicLoader)
      SET(KWSYS_CXX_TESTS ${KWSYS_CXX_TESTS} testDynamicLoader)
      # If kwsys contains the DynamicLoader, need extra library
      ADD_LIBRARY(${KWSYS_NAMESPACE}TestDynload MODULE testDynload.c)
    ENDIF(KWSYS_USE_DynamicLoader)
    CREATE_TEST_SOURCELIST(
      KWSYS_CXX_TEST_SRCS ${KWSYS_NAMESPACE}TestsCxx.cxx
      ${KWSYS_CXX_TESTS}
      )
    ADD_EXECUTABLE(${KWSYS_NAMESPACE}TestsCxx ${KWSYS_CXX_TEST_SRCS})
    TARGET_LINK_LIBRARIES(${KWSYS_NAMESPACE}TestsCxx ${KWSYS_NAMESPACE})

    SET(TEST_SYSTEMTOOLS_BIN_FILE
      "${CMAKE_CURRENT_SOURCE_DIR}/testSystemTools.bin")
    SET(TEST_SYSTEMTOOLS_SRC_FILE
      "${CMAKE_CURRENT_SOURCE_DIR}/testSystemTools.cxx")
    CONFIGURE_FILE(
      ${PROJECT_SOURCE_DIR}/testSystemTools.h.in
      ${PROJECT_BINARY_DIR}/testSystemTools.h)
    INCLUDE_DIRECTORIES(${PROJECT_BINARY_DIR})

    IF(CTEST_TEST_KWSYS)
      CONFIGURE_FILE("${CMAKE_CURRENT_SOURCE_DIR}/ExtraTest.cmake.in"
        "${CMAKE_CURRENT_BINARY_DIR}/ExtraTest.cmake")
      SET_DIRECTORY_PROPERTIES(PROPERTIES TEST_INCLUDE_FILE "${CMAKE_CURRENT_BINARY_DIR}/ExtraTest.cmake")
    ENDIF(CTEST_TEST_KWSYS)

    SET(KWSYS_TEST_ARGS_testCommandLineArguments
      --another-bool-variable
      --long3=opt
      --set-bool-arg1
      -SSS ken brad bill andy
      --some-bool-variable=true
      --some-double-variable12.5
      --some-int-variable 14
      "--some-string-variable=test string with space"
      --some-multi-argument 5 1 8 3 7 1 3 9 7 1
      -N 12.5 -SS=andy -N 1.31 -N 22
      -SS=bill -BBtrue -SS=brad
      -BBtrue
      -BBfalse
      -SS=ken
      -A
      -C=test
      --long2 hello
      )
    SET(KWSYS_TEST_ARGS_testCommandLineArguments1
      --ignored
      -n 24
      --second-ignored
      "-m=test value"
      third-ignored
      -p
      some junk at the end
      )
    FOREACH(test ${KWSYS_CXX_TESTS})
      ADD_TEST(kwsys.${test} ${EXEC_DIR}/${KWSYS_NAMESPACE}TestsCxx ${test} ${KWSYS_TEST_ARGS_${test}})
    ENDFOREACH(test)

    # Process tests.
    ADD_EXECUTABLE(${KWSYS_NAMESPACE}TestProcess testProcess.c)
    TARGET_LINK_LIBRARIES(${KWSYS_NAMESPACE}TestProcess ${KWSYS_NAMESPACE}_c)
    IF(NOT CYGWIN)
      SET(KWSYS_TEST_PROCESS_7 7)
    ENDIF(NOT CYGWIN)
    FOREACH(n 1 2 3 4 5 6 ${KWSYS_TEST_PROCESS_7})
      ADD_TEST(kwsys.testProcess-${n} ${EXEC_DIR}/${KWSYS_NAMESPACE}TestProcess ${n})
    ENDFOREACH(n)

    # Configure some test properties.
    IF(COMMAND SET_TESTS_PROPERTIES AND COMMAND GET_TEST_PROPERTY AND KWSYS_STANDALONE)
      # We expect test to fail
      SET_TESTS_PROPERTIES(kwsys.testFail PROPERTIES WILL_FAIL ON)
      GET_TEST_PROPERTY(kwsys.testFail WILL_FAIL wfv)
      SET_TESTS_PROPERTIES(kwsys.testRegistry PROPERTIES FAIL_REGULAR_EXPRESSION "ERROR;FAIL;Test failed")
      SET_TESTS_PROPERTIES(kwsys.testRegistry PROPERTIES PASS_REGULAR_EXPRESSION "Test passed")
      SET_TESTS_PROPERTIES(kwsys.testFail PROPERTIES MEASUREMENT "Some Key=Some Value")
      MESSAGE(STATUS "GET_TEST_PROPERTY returned: ${wfv}")
    ENDIF(COMMAND SET_TESTS_PROPERTIES AND COMMAND GET_TEST_PROPERTY AND KWSYS_STANDALONE)
  ENDIF(BUILD_TESTING)
ENDIF(KWSYS_STANDALONE OR CMake_SOURCE_DIR)