summaryrefslogtreecommitdiffstats
path: root/CVSROOT
diff options
context:
space:
mode:
author(no author) <(no author)@afe2bf4a-e733-0410-8a33-86f594647bc7>2001-03-11 19:23:58 (GMT)
committer(no author) <(no author)@afe2bf4a-e733-0410-8a33-86f594647bc7>2001-03-11 19:23:58 (GMT)
commit7f1463aafa6cd274c5febc2bf22d9ace6e791fb9 (patch)
treeb552ea61569f4151b38432bafa9db2db5fcc0c5f /CVSROOT
parentf280bea9dedf210e59b80f486bb016e348a387a6 (diff)
downloadDoxygen-7f1463aafa6cd274c5febc2bf22d9ace6e791fb9.zip
Doxygen-7f1463aafa6cd274c5febc2bf22d9ace6e791fb9.tar.gz
Doxygen-7f1463aafa6cd274c5febc2bf22d9ace6e791fb9.tar.bz2
This commit was manufactured by cvs2svn to create tagRelease_1_2_6
'Release_1_2_6'.
Diffstat (limited to 'CVSROOT')
-rw-r--r--CVSROOT/checkoutlist13
-rw-r--r--CVSROOT/commitinfo15
-rw-r--r--CVSROOT/config9
-rw-r--r--CVSROOT/cvswrappers23
-rw-r--r--CVSROOT/editinfo21
-rw-r--r--CVSROOT/loginfo26
-rw-r--r--CVSROOT/modules27
-rw-r--r--CVSROOT/notify12
-rw-r--r--CVSROOT/rcsinfo13
-rw-r--r--CVSROOT/taginfo20
-rw-r--r--CVSROOT/verifymsg21
11 files changed, 0 insertions, 200 deletions
diff --git a/CVSROOT/checkoutlist b/CVSROOT/checkoutlist
deleted file mode 100644
index b04b350..0000000
--- a/CVSROOT/checkoutlist
+++ /dev/null
@@ -1,13 +0,0 @@
-# The "checkoutlist" file is used to support additional version controlled
-# administrative files in $CVSROOT/CVSROOT, such as template files.
-#
-# The first entry on a line is a filename which will be checked out from
-# the corresponding RCS file in the $CVSROOT/CVSROOT directory.
-# The remainder of the line is an error message to use if the file cannot
-# be checked out.
-#
-# File format:
-#
-# [<whitespace>]<filename><whitespace><error message><end-of-line>
-#
-# comment lines begin with '#'
diff --git a/CVSROOT/commitinfo b/CVSROOT/commitinfo
deleted file mode 100644
index b19e7b7..0000000
--- a/CVSROOT/commitinfo
+++ /dev/null
@@ -1,15 +0,0 @@
-# The "commitinfo" file is used to control pre-commit checks.
-# The filter on the right is invoked with the repository and a list
-# of files to check. A non-zero exit of the filter program will
-# cause the commit to be aborted.
-#
-# The first entry on a line is a regular expression which is tested
-# against the directory that the change is being committed to, relative
-# to the $CVSROOT. For the first match that is found, then the remainder
-# of the line is the name of the filter to run.
-#
-# If the repository name does not match any of the regular expressions in this
-# file, the "DEFAULT" line is used, if it is specified.
-#
-# If the name "ALL" appears as a regular expression it is always used
-# in addition to the first matching regex or "DEFAULT".
diff --git a/CVSROOT/config b/CVSROOT/config
deleted file mode 100644
index 8817419..0000000
--- a/CVSROOT/config
+++ /dev/null
@@ -1,9 +0,0 @@
-# Set this to "no" if pserver shouldn't check system users/passwords
-#SystemAuth=no
-
-# Set `PreservePermissions' to `yes' to save file status information
-# in the repository.
-#PreservePermissions=no
-
-TopLevelAdmin=yes
-#LockDir=/u/kp3softd/cvslocks/
diff --git a/CVSROOT/cvswrappers b/CVSROOT/cvswrappers
deleted file mode 100644
index 0c725ea..0000000
--- a/CVSROOT/cvswrappers
+++ /dev/null
@@ -1,23 +0,0 @@
-# This file affects handling of files based on their names.
-#
-# The -t/-f options allow one to treat directories of files
-# as a single file, or to transform a file in other ways on
-# its way in and out of CVS.
-#
-# The -m option specifies whether CVS attempts to merge files.
-#
-# The -k option specifies keyword expansion (e.g. -kb for binary).
-#
-# Format of wrapper file ($CVSROOT/CVSROOT/cvswrappers or .cvswrappers)
-#
-# wildcard [option value][option value]...
-#
-# where option is one of
-# -f from cvs filter value: path to filter
-# -t to cvs filter value: path to filter
-# -m update methodology value: MERGE or COPY
-# -k expansion mode value: b, o, kkv, &c
-#
-# and value is a single-quote delimited value.
-# For example:
-*.gif -k 'b' -m 'COPY'
diff --git a/CVSROOT/editinfo b/CVSROOT/editinfo
deleted file mode 100644
index d78886c..0000000
--- a/CVSROOT/editinfo
+++ /dev/null
@@ -1,21 +0,0 @@
-# The "editinfo" file is used to allow verification of logging
-# information. It works best when a template (as specified in the
-# rcsinfo file) is provided for the logging procedure. Given a
-# template with locations for, a bug-id number, a list of people who
-# reviewed the code before it can be checked in, and an external
-# process to catalog the differences that were code reviewed, the
-# following test can be applied to the code:
-#
-# Making sure that the entered bug-id number is correct.
-# Validating that the code that was reviewed is indeed the code being
-# checked in (using the bug-id number or a seperate review
-# number to identify this particular code set.).
-#
-# If any of the above test failed, then the commit would be aborted.
-#
-# Actions such as mailing a copy of the report to each reviewer are
-# better handled by an entry in the loginfo file.
-#
-# One thing that should be noted is the the ALL keyword is not
-# supported. There can be only one entry that matches a given
-# repository.
diff --git a/CVSROOT/loginfo b/CVSROOT/loginfo
deleted file mode 100644
index 5a59f0a..0000000
--- a/CVSROOT/loginfo
+++ /dev/null
@@ -1,26 +0,0 @@
-# The "loginfo" file controls where "cvs commit" log information
-# is sent. The first entry on a line is a regular expression which must match
-# the directory that the change is being made to, relative to the
-# $CVSROOT. If a match is found, then the remainder of the line is a filter
-# program that should expect log information on its standard input.
-#
-# If the repository name does not match any of the regular expressions in this
-# file, the "DEFAULT" line is used, if it is specified.
-#
-# If the name ALL appears as a regular expression it is always used
-# in addition to the first matching regex or DEFAULT.
-#
-# You may specify a format string as part of the
-# filter. The string is composed of a `%' followed
-# by a single format character, or followed by a set of format
-# characters surrounded by `{' and `}' as separators. The format
-# characters are:
-#
-# s = file name
-# V = old version number (pre-checkin)
-# v = new version number (post-checkin)
-#
-# For example:
-#DEFAULT (echo ""; id; echo %s; date; cat) >> $CVSROOT/CVSROOT/commitlog
-# or
-#DEFAULT (echo ""; id; echo %{sVv}; date; cat) >> $CVSROOT/CVSROOT/commitlog
diff --git a/CVSROOT/modules b/CVSROOT/modules
deleted file mode 100644
index 2754201..0000000
--- a/CVSROOT/modules
+++ /dev/null
@@ -1,27 +0,0 @@
-# Three different line formats are valid:
-# key -a aliases...
-# key [options] directory
-# key [options] directory files...
-#
-# Where "options" are composed of:
-# -i prog Run "prog" on "cvs commit" from top-level of module.
-# -o prog Run "prog" on "cvs checkout" of module.
-# -e prog Run "prog" on "cvs export" of module.
-# -t prog Run "prog" on "cvs rtag" of module.
-# -u prog Run "prog" on "cvs update" of module.
-# -d dir Place module in directory "dir" instead of module name.
-# -l Top-level directory only -- do not recurse.
-#
-# NOTE: If you change any of the "Run" options above, you'll have to
-# release and re-checkout any working directories of these modules.
-#
-# And "directory" is a path to a directory relative to $CVSROOT.
-#
-# The "-a" option specifies an alias. An alias is interpreted as if
-# everything on the right of the "-a" had been typed on the command line.
-#
-# You can encode a module within a module by using the special '&'
-# character to interpose another module into the current module. This
-# can be useful for creating a module that consists of many directories
-# spread out over the entire source repository.
-doxygen -a addon bin doc examples html lib objects packages qtools src tmake wintools
diff --git a/CVSROOT/notify b/CVSROOT/notify
deleted file mode 100644
index 34f0bc2..0000000
--- a/CVSROOT/notify
+++ /dev/null
@@ -1,12 +0,0 @@
-# The "notify" file controls where notifications from watches set by
-# "cvs watch add" or "cvs edit" are sent. The first entry on a line is
-# a regular expression which is tested against the directory that the
-# change is being made to, relative to the $CVSROOT. If it matches,
-# then the remainder of the line is a filter program that should contain
-# one occurrence of %s for the user to notify, and information on its
-# standard input.
-#
-# "ALL" or "DEFAULT" can be used in place of the regular expression.
-#
-# For example:
-#ALL mail %s -s "CVS notification"
diff --git a/CVSROOT/rcsinfo b/CVSROOT/rcsinfo
deleted file mode 100644
index 49e59f4..0000000
--- a/CVSROOT/rcsinfo
+++ /dev/null
@@ -1,13 +0,0 @@
-# The "rcsinfo" file is used to control templates with which the editor
-# is invoked on commit and import.
-#
-# The first entry on a line is a regular expression which is tested
-# against the directory that the change is being made to, relative to the
-# $CVSROOT. For the first match that is found, then the remainder of the
-# line is the name of the file that contains the template.
-#
-# If the repository name does not match any of the regular expressions in this
-# file, the "DEFAULT" line is used, if it is specified.
-#
-# If the name "ALL" appears as a regular expression it is always used
-# in addition to the first matching regex or "DEFAULT".
diff --git a/CVSROOT/taginfo b/CVSROOT/taginfo
deleted file mode 100644
index 274a46d..0000000
--- a/CVSROOT/taginfo
+++ /dev/null
@@ -1,20 +0,0 @@
-# The "taginfo" file is used to control pre-tag checks.
-# The filter on the right is invoked with the following arguments:
-#
-# $1 -- tagname
-# $2 -- operation "add" for tag, "mov" for tag -F, and "del" for tag -d
-# $3 -- repository
-# $4-> file revision [file revision ...]
-#
-# A non-zero exit of the filter program will cause the tag to be aborted.
-#
-# The first entry on a line is a regular expression which is tested
-# against the directory that the change is being committed to, relative
-# to the $CVSROOT. For the first match that is found, then the remainder
-# of the line is the name of the filter to run.
-#
-# If the repository name does not match any of the regular expressions in this
-# file, the "DEFAULT" line is used, if it is specified.
-#
-# If the name "ALL" appears as a regular expression it is always used
-# in addition to the first matching regex or "DEFAULT".
diff --git a/CVSROOT/verifymsg b/CVSROOT/verifymsg
deleted file mode 100644
index 86f747c..0000000
--- a/CVSROOT/verifymsg
+++ /dev/null
@@ -1,21 +0,0 @@
-# The "verifymsg" file is used to allow verification of logging
-# information. It works best when a template (as specified in the
-# rcsinfo file) is provided for the logging procedure. Given a
-# template with locations for, a bug-id number, a list of people who
-# reviewed the code before it can be checked in, and an external
-# process to catalog the differences that were code reviewed, the
-# following test can be applied to the code:
-#
-# Making sure that the entered bug-id number is correct.
-# Validating that the code that was reviewed is indeed the code being
-# checked in (using the bug-id number or a seperate review
-# number to identify this particular code set.).
-#
-# If any of the above test failed, then the commit would be aborted.
-#
-# Actions such as mailing a copy of the report to each reviewer are
-# better handled by an entry in the loginfo file.
-#
-# One thing that should be noted is the the ALL keyword is not
-# supported. There can be only one entry that matches a given
-# repository.