Release-1.1.3-20000528

1 files changed, 81 insertions, 78 deletions

diff --git a/doc/config.doc b/doc/config.doc
index bc27a16..cfd41d9 100644
--- a/doc/config.doc
+++ b/doc/config.doc
@@ -148,9 +148,9 @@ followed by the descriptions of the tags grouped by category.
 \endlatexonly
 
 \subsection config_general General options
+\anchor cfg_project_name
 <dl>
 
-\anchor cfg_project_name
 <dt>\c PROJECT_NAME <dd>
  \addindex PROJECT_NAME
  The \c PROJECT_NAME tag is a single word (or a sequence of words
@@ -269,9 +269,9 @@ followed by the descriptions of the tags grouped by category.
 
 \anchor cfg_always_detailed_sec
 <dt>\c ALWAYS_DETAILED_SEC <dd>
-If the \c ALWAYS_DETAILED_SEC and \c REPEAT_BRIEF tags are both set to \c YES then
-Doxygen will generate a detailed section even if there is only a brief
-description.
+ If the \c ALWAYS_DETAILED_SEC and \c REPEAT_BRIEF tags are both set to \c YES then
+ Doxygen will generate a detailed section even if there is only a brief
+ description.
 
 \anchor cfg_full_path_names
 <dt>\c FULL_PATH_NAMES <dd>
@@ -369,23 +369,23 @@ description.
 
 \anchor cfg_tab_size
 <dt>\c TAB_SIZE <dd>
-  \addindex TAB_SIZE
-  the \c TAB_SIZE tag can be used to set the number of spaces in a tab.
-  Doxygen uses this value to replace tabs by spaces in code fragments.
+ \addindex TAB_SIZE
+ the \c TAB_SIZE tag can be used to set the number of spaces in a tab.
+ Doxygen uses this value to replace tabs by spaces in code fragments.
 
 \anchor cfg_enabled_sections
 <dt>\c ENABLED_SECTIONS <dd>
-  \addindex ENABLED_SECTIONS
-  The \c ENABLE_SECTIONS tag can be used to enable conditional
-  documentation sections, marked by \ref cmdif "\\if" \<section-label\> ... 
-  \ref cmdendif "\\endif" blocks.
+ \addindex ENABLED_SECTIONS
+ The \c ENABLE_SECTIONS tag can be used to enable conditional
+ documentation sections, marked by \ref cmdif "\\if" \<section-label\> ... 
+ \ref cmdendif "\\endif" blocks.
 
 </dl>
 
 \subsection config_input Input related options
+\anchor cfg_input
 <dl>
 
-\anchor cfg_input
 <dt>\c INPUT <dd>
  \addindex INPUT
  The \c INPUT tag is used to specify the files and/or directories that contain 
@@ -465,9 +465,9 @@ description.
 </dl>
 
 \subsection html_output HTML related options
+\anchor cfg_generate_html
 <dl>
 
-\anchor cfg_generate_html
 <dt>\c GENERATE_HTML <dd>
  \addindex GENERATE_HTML
  If the \c GENERATE_HTML tag is set to \c YES (the default) Doxygen will
@@ -553,7 +553,7 @@ TD.md { background-color: #f2f2ff }
 DIV.groupHeader { margin-left: 16; margin-top: 12; margin-bottom: 6; font-weight
 DIV.groupText { margin-left: 16; font-style: italic; font-size: smaller }
 FONT.keyword       { color: #008000 }
-FONT.keywordtype   { color: #008060 }
+FONT.keywordtype   { color: #604020 }
 FONT.keywordflow   { color: #e08000 }
 FONT.comment       { color: #800000 }
 FONT.preprocessor  { color: #806020 }
@@ -563,66 +563,70 @@ FONT.charliteral   { color: #008080 }
 
 \anchor cfg_html_align_members
 <dt>\c HTML_ALIGN_MEMBERS <dd>
-If the \c HTML_ALIGN_MEMBERS tag is set to \c YES, the members of classes,
-files or namespaces will be aligned in HTML using tables. If set to
-NO a bullet list will be used. 
+ \addindex HTML_ALIGN_MEMBERS
+ If the \c HTML_ALIGN_MEMBERS tag is set to \c YES, the members of classes,
+ files or namespaces will be aligned in HTML using tables. If set to
+ NO a bullet list will be used. 
 
-<b>Note:</b>
-Setting this tag to NO will become obsolete in the future, since I only
-intent to support and test the aligned representation.
+ <b>Note:</b>
+ Setting this tag to NO will become obsolete in the future, since I only
+ intent to support and test the aligned representation.
 
 \anchor cfg_generate_htmlhelp
 <dt>\c GENERATE_HTMLHELP <dd>
-If the \c GENERATE_HTMLHELP tag is set to \c YES then
-doxygen generates three additional HTML index files: 
-\c index.hhp, \c index.hhc, and \c index.hhk. The \c index.hhp is a 
-project file that can be read by 
-<a href="http://msdn.microsoft.com/workshop/author/htmlhelp">
-Microsoft HTML help workshop</a>
-\latexonly
-(see http://msdn.microsoft.com/workshop/author/htmlhelp)
-\endlatexonly
-on Windows.
-
-The HTML workshop contains a compiler that can convert all HTML output 
-generated by doxygen into a single compressed HTML file (.chm). Compressed
-HTML files are now used as the Windows 98 help format, and will replace
-the old windows help format (.hlp) on all Windows platforms in the future.
-Compressed HTML files also contain an index, a table of contents,
-and you can search for words in the documentation 
-(which basically renders \c doxysearch obsolete on Windows). 
-The HTML workshop also contains a viewer for compressed HTML files.
+ \addindex GENERATE_HTMLHELP
+ If the \c GENERATE_HTMLHELP tag is set to \c YES then
+ doxygen generates three additional HTML index files: 
+ \c index.hhp, \c index.hhc, and \c index.hhk. The \c index.hhp is a 
+ project file that can be read by 
+ <a href="http://msdn.microsoft.com/workshop/author/htmlhelp">
+ Microsoft HTML help workshop</a>
+ \latexonly
+ (see http://msdn.microsoft.com/workshop/author/htmlhelp)
+ \endlatexonly
+ on Windows.
+
+ The HTML workshop contains a compiler that can convert all HTML output 
+ generated by doxygen into a single compressed HTML file (.chm). Compressed
+ HTML files are now used as the Windows 98 help format, and will replace
+ the old windows help format (.hlp) on all Windows platforms in the future.
+ Compressed HTML files also contain an index, a table of contents,
+ and you can search for words in the documentation 
+ (which basically renders \c doxysearch obsolete on Windows). 
+ The HTML workshop also contains a viewer for compressed HTML files.
 
 </dl>
 \subsection alphabetical_index Alphabetical index options
+\anchor cfg_alphabetical_index
 <dl>
 
-\anchor cfg_alphabetical_index
 <dt>\c ALPHABETICAL_INDEX <dd>
-If the \c ALPHABETICAL_INDEX tag is set to \c YES, an alphabetical index
-of all compounds will be generated. Enable this if the project contains 
-a lot of classes, structs, unions or interfaces.
+ \addindex ALPHABETICAL_INDEX
+ If the \c ALPHABETICAL_INDEX tag is set to \c YES, an alphabetical index
+ of all compounds will be generated. Enable this if the project contains 
+ a lot of classes, structs, unions or interfaces.
 
 \anchor cfg_cols_in_alpha_index
 <dt>\c COLS_IN_ALPHA_INDEX <dd>
-If the alphabetical index is enabled 
-(see \c ALPHABETICAL_INDEX) then the \c COLS_IN_ALPHA_INDEX tag can be 
-used to specify the number of columns in which this list will be split (can be a number in the range [1..20])
+ \addindex COLS_IN_ALPHA_INDEX
+ If the alphabetical index is enabled 
+ (see \c ALPHABETICAL_INDEX) then the \c COLS_IN_ALPHA_INDEX tag can be 
+ used to specify the number of columns in which this list will be split (can be a number in the range [1..20])
 
 \anchor cfg_ignore_prefix
 <dt>\c IGNORE_PREFIX <dd>
-In case all classes in a project start with a common prefix, all classes will 
-be put under the same header in the alphabetical index.
-The \c IGNORE_PREFIX tag can be used to specify a prefix 
-(or a list of prefixes) that should be ignored while generating the index 
-headers.
+ \addindex IGNORE_PREFIX
+ In case all classes in a project start with a common prefix, all classes will 
+ be put under the same header in the alphabetical index.
+ The \c IGNORE_PREFIX tag can be used to specify a prefix 
+ (or a list of prefixes) that should be ignored while generating the index 
+ headers.
 
 </dl>
-
 \subsection latex_output LaTeX related options
+\anchor cfg_generate_latex
 <dl>
 
-\anchor cfg_generate_latex
 <dt>\c GENERATE_LATEX <dd>
  \addindex GENERATE_LATEX
  If the \c GENERATE_LATEX tag is set to \c YES (the default) Doxygen will
@@ -716,32 +720,32 @@ EXTRA_PACKAGES = times
 <dt>\c PDF_HYPERLINKS <dd>
  \addindex PDF_HYPERLINKS
 
-If the \c PDF_HYPERLINKS tag is set to \c YES, the LaTeX that is generated
-is prepared for conversion to pdf (using ps2pdf). The pdf file will
-contain links (just like the HTML output) instead of page references
-This makes the output suitable for online browsing using a pdf viewer.
+ If the \c PDF_HYPERLINKS tag is set to \c YES, the LaTeX that is generated
+ is prepared for conversion to pdf (using ps2pdf). The pdf file will
+ contain links (just like the HTML output) instead of page references
+ This makes the output suitable for online browsing using a pdf viewer.
 
 \anchor cfg_latex_batchmode
 <dt>\c LATEX_BATCHMODE <dd>
  \addindex LATEX_BATCHMODE
 
-If the \c LATEX_BATCHMODE tag is set to \c YES, doxygen will add the \\batchmode.
-command to the generated \f$\mbox{\LaTeX}\f$ files. This will 
-instruct \f$\mbox{\LaTeX}\f$ to keep running if errors occur, instead of 
-asking the user for help. This option is also used when generating formulas 
-in HTML.
+ If the \c LATEX_BATCHMODE tag is set to \c YES, doxygen will add the \\batchmode.
+ command to the generated \f$\mbox{\LaTeX}\f$ files. This will 
+ instruct \f$\mbox{\LaTeX}\f$ to keep running if errors occur, instead of 
+ asking the user for help. This option is also used when generating formulas 
+ in HTML.
 
 </dl>
-
 \subsection rtf_output RTF related options
-<dl>
 \anchor cfg_generate_rtf
+<dl>
+
 <dt>\c GENERATE_RTF <dd>
  \addindex GENERATE_RTF
-  If the \c GENERATE_RTF tag is set to \c YES Doxygen will generate RTF output.
-  For now this is experimental and is disabled by default. The RTF
-  output is optimised for Word 97 and may not look too pretty with
-  other readers/editors.
+ If the \c GENERATE_RTF tag is set to \c YES Doxygen will generate RTF output.
+ For now this is experimental and is disabled by default. The RTF
+ output is optimised for Word 97 and may not look too pretty with
+ other readers/editors.
 
 \anchor cfg_rtf_output
 <dt>\c RTF_OUTPUT <dd>
@@ -772,9 +776,9 @@ in HTML.
 </dl>
 
 \subsection man_output Man page related options
+\anchor cfg_generate_man
 <dl>
 
-\anchor cfg_generate_man
 <dt>\c GENERATE_MAN <dd>
  \addindex GENERATE_MAN
  If the \c GENERATE_MAN tag is set to \c YES (the default) Doxygen will
@@ -797,9 +801,9 @@ in HTML.
 </dl>
 
 \subsection config_prepro Preprocessor related options
+\anchor cfg_enable_preprocessing
 <dl>
 
-\anchor cfg_enable_preprocessing
 <dt>\c ENABLE_PREPROCESSING <dd>
  \addindex ENABLE_PREPROCESSING
  If the \c ENABLE_PREPROCESSING tag is set to \c YES (the default) Doxygen will
@@ -843,11 +847,10 @@ in HTML.
  \c PREDEFINED tag.
 
 </dl>
-
 \subsection config_extref External reference options
+\anchor cfg_tagfiles
 <dl>
 
-\anchor cfg_tagfiles
 <dt>\c TAGFILES <dd> 
  \addindex TAGFILES
  The \c TAGFILES tag can be used to specify one or more tagfiles. 
@@ -896,9 +899,9 @@ TAGFILES = file1=loc1 "file2 = loc2" ... </pre>
 
 </dl>
 \subsection config_dot Dot options
+\anchor cfg_have_dot
 <dl>
 
-\anchor cfg_have_dot
 <dt>\c HAVE_DOT <dd>
  \addindex HAVE_DOT
  If you set the \c HAVE_DOT tag to \c YES then doxygen will assume the dot tool is
@@ -910,10 +913,10 @@ TAGFILES = file1=loc1 "file2 = loc2" ... </pre>
 \anchor cfg_class_graph
 <dt>\c CLASS_GRAPH <dd>
  \addindex CLASS_GRAPH
-If the \c CLASS_GRAPH and \c HAVE_DOT tags are set to \c YES then doxygen
-will generate a graph for each documented class showing the direct and
-indirect inheritance relations. Setting this tag to \c YES will force the
-the \c CLASS_DIAGRAMS tag to NO.
+ If the \c CLASS_GRAPH and \c HAVE_DOT tags are set to \c YES then doxygen
+ will generate a graph for each documented class showing the direct and
+ indirect inheritance relations. Setting this tag to \c YES will force the
+ the \c CLASS_DIAGRAMS tag to NO.
 
 \anchor cfg_collaboration_graph
 <dt>\c COLLABORATION_GRAPH <dd>
@@ -939,9 +942,9 @@ the \c CLASS_DIAGRAMS tag to NO.
 
 </dl>
 \subsection config_search Search engine options
+\anchor cfg_searchengine
 <dl>
 
-\anchor cfg_searchengine
 <dt>\c SEARCHENGINE <dd>
  \addindex SEARCHENGINE
  The \c SEARCHENGINE tag specifies whether or not a