Release-1.3.3

5 files changed, 1157 insertions, 17 deletions

diff --git a/doc/Doxyfile b/doc/Doxyfile
index c25878e..acfec34 100644
--- a/doc/Doxyfile
+++ b/doc/Doxyfile
@@ -26,6 +26,7 @@ GENERATE_LATEX    = YES
 GENERATE_HTML     = YES
 GENERATE_HTMLHELP = YES
 GENERATE_RTF      = NO
+GENERATE_XML      = NO
 ENABLED_SECTIONS  = logo_on
 ENABLE_PREPROCESSING = NO
 CASE_SENSE_NAMES  = NO
diff --git a/doc/commands.doc b/doc/commands.doc
index 950d4e5..073e3d9 100644
--- a/doc/commands.doc
+++ b/doc/commands.doc
@@ -391,8 +391,15 @@ doxygen. Unrecognized commands are treated as normal text.
   
   \addindex \\internal
   This command writes the message `For internal use only' to the output and
-  all text \e after a \c \\internal command until the end of the
-  comment block is ignored. 
+  all text \e after an \c \\internal command until the end of the
+  comment block or the end of the section (whichever comes first) is 
+  marked as "internal". 
+
+  If the \\internal command is put inside a section 
+  (see for example \ref cmdsection "\\section") all subsection after the 
+  command are considered to be internal as well. Only a new section at the 
+  same level will be visible again. 
+
   You can use \ref cfg_internal_docs "INTERNAL_DOCS" in the config file
   to show or hide the internal documentation.
 
diff --git a/doc/install.doc b/doc/install.doc
index 2dbbf51..3dfc2e7 100644
--- a/doc/install.doc
+++ b/doc/install.doc
@@ -376,9 +376,21 @@ perl script in <code>wintools/make.pl</code> a bit.
 Let me know what you had to change if you got Doxygen working with another 
 compiler. 
 
+If you have Visual C++ 6.0, and the source distribution, you can easily
+build doxygen using the project files in the \c wintools directory. If
+you want to build the CVS sources, or want to build from the command line,
+or with another compiler, you have to follow the steps below.
+
+Thomas Baust reported that if you have Visual Studio.NET (2003) then 
+you should be aware that there is a problem with the _popen() and _pclose() 
+implementation, which currently leaks handles, so if you build doxygen with 
+it and use the INPUT_FILTER, you will run to risk of crashing Windows! 
+The problem is reported to and confirmed by Microsoft so maybe it will 
+fixed in the next service pack.
+
 Since Windows comes without all the nice tools that Unix users are
-used to, you need to install a number of these tools before you can compile 
-doxygen for Windows.
+used to, you'll need to install a number of these tools before you can compile 
+doxygen for Windows from the command-line.
 
 Here is what is required:
 <ul>
diff --git a/doc/language.doc b/doc/language.doc
index 9b0e4dd..d3c9db1 100644
--- a/doc/language.doc
+++ b/doc/language.doc
@@ -25,7 +25,7 @@ Doxygen has built-in support for multiple languages. This means
 that the text fragments that doxygen generates can be produced in
 languages other than English (the default) at configuration time.
 
-Currently (version 1.3.2), 28 languages 
+Currently (version 1.3.2-20030717), 28 languages 
 are supported (sorted alphabetically): 
 Brazilian Portuguese, Catalan, Chinese, Chinese Traditional, Croatian, 
 Czech, Danish, Dutch, English, Finnish, 
@@ -55,7 +55,7 @@ when the translator was updated.
       <TD>Brazilian Portuguese</TD>  
       <TD>Fabio "FJTC" Jun Takada Chino</TD>
       <TD>chino@NOSPAM.icmc.sc.usp.br</TD>
-      <TD>1.3.1</TD>
+      <TD>up-to-date</TD>
   </TR>
   <TR BGCOLOR="#ffffff">
       <TD>Catalan</TD>  
@@ -71,9 +71,9 @@ when the translator was updated.
   </TR>
   <TR BGCOLOR="#ffffff">
       <TD>Chinese Traditional</TD>  
-      <TD>Gary Lee</TD>
-      <TD>garylee@NOSPAM.ecosine.com.tw</TD>
-      <TD>1.2.16</TD>
+      <TD>Daniel YC Lin<br>Gary Lee</TD>
+      <TD>daniel@NOSPAM.twpda.com<br>garylee@NOSPAM.ecosine.com.tw</TD>
+      <TD>up-to-date</TD>
   </TR>
   <TR BGCOLOR="#ffffff">
       <TD>Croatian</TD>  
@@ -145,7 +145,7 @@ when the translator was updated.
       <TD>Japanese</TD>  
       <TD>Ryunosuke Satoh<br>Kenji Nagamatsu</TD>
       <TD>sun594@NOSPAM.hotmail.com<br>naga@NOSPAM.joyful.club.ne.jp</TD>
-      <TD>strange</TD>
+      <TD>obsolete</TD>
   </TR>
   <TR BGCOLOR="#ffffff">
       <TD>Korean</TD>  
@@ -169,7 +169,7 @@ when the translator was updated.
       <TD>Portuguese</TD>  
       <TD>Rui Godinho Lopes</TD>
       <TD>ruiglopes@NOSPAM.yahoo.com</TD>
-      <TD>1.3.1</TD>
+      <TD>up-to-date</TD>
   </TR>
   <TR BGCOLOR="#ffffff">
       <TD>Romanian</TD>  
@@ -187,7 +187,7 @@ when the translator was updated.
       <TD>Serbian</TD>  
       <TD>Dejan Milosavljevic</TD>
       <TD>dmilos@NOSPAM.email.com</TD>
-      <TD>1.3.1</TD>
+      <TD>up-to-date</TD>
   </TR>
   <TR BGCOLOR="#ffffff">
       <TD>Slovak</TD>  
@@ -230,14 +230,15 @@ when the translator was updated.
   {\bf Language} & {\bf Maintainer} & {\bf Contact address} & {\bf Status} \\
   \hline
   \hline
-  Brazilian Portuguese & Fabio "FJTC" Jun Takada Chino & {\tt chino@icmc.sc.usp.br} & 1.3.1 \\
+  Brazilian Portuguese & Fabio "FJTC" Jun Takada Chino & {\tt chino@icmc.sc.usp.br} & up-to-date \\
   \hline
   Catalan & Albert Mora & {\tt amora@iua.upf.es} & 1.2.17 \\
   \hline
   Chinese & Wei Liu & {\tt liuwei@asiainfo.com} & 1.2.13 \\
    & Wang Weihan & {\tt wangweihan@capinfo.com.cn} &  \\
   \hline
-  Chinese Traditional & Gary Lee & {\tt garylee@ecosine.com.tw} & 1.2.16 \\
+  Chinese Traditional & Daniel YC Lin & {\tt daniel@twpda.com} & up-to-date \\
+   & Gary Lee & {\tt garylee@ecosine.com.tw} &  \\
   \hline
   Croatian & Boris Bralo & {\tt boris.bralo@zg.tel.hr} & 1.3.1 \\
   \hline
@@ -262,7 +263,7 @@ when the translator was updated.
   Italian & Alessandro Falappa & {\tt alessandro@falappa.net} & up-to-date \\
    & Ahmed Aldo Faisal & {\tt aaf23@cam.ac.uk} &  \\
   \hline
-  Japanese & Ryunosuke Satoh & {\tt sun594@hotmail.com} & strange \\
+  Japanese & Ryunosuke Satoh & {\tt sun594@hotmail.com} & obsolete \\
    & Kenji Nagamatsu & {\tt naga@joyful.club.ne.jp} &  \\
   \hline
   Korean & Richard Kim & {\tt ryk@dspwiz.com} & strange \\
@@ -272,13 +273,13 @@ when the translator was updated.
   Polish & Piotr Kaminski & {\tt Piotr.Kaminski@ctm.gdynia.pl} & strange \\
    & Grzegorz Kowal & {\tt g\_kowal@poczta.onet.pl} &  \\
   \hline
-  Portuguese & Rui Godinho Lopes & {\tt ruiglopes@yahoo.com} & 1.3.1 \\
+  Portuguese & Rui Godinho Lopes & {\tt ruiglopes@yahoo.com} & up-to-date \\
   \hline
   Romanian & Alexandru Iosup & {\tt aiosup@yahoo.com} & 1.2.16 \\
   \hline
   Russian & Alexandr Chelpanov & {\tt cav@cryptopro.ru} & strange \\
   \hline
-  Serbian & Dejan Milosavljevic & {\tt dmilos@email.com} & 1.3.1 \\
+  Serbian & Dejan Milosavljevic & {\tt dmilos@email.com} & up-to-date \\
   \hline
   Slovak & Stanislav Kudl\'{a}\v{c} & {\tt skudlac@pobox.sk} & 1.2.18 \\
   \hline
diff --git a/doc/translator.py b/doc/translator.py
new file mode 100644
index 0000000..177db97
--- /dev/null
+++ b/doc/translator.py
@@ -0,0 +1,1119 @@
+"""Script to generate reports on translator classes from Doxygen sources.
+
+  The main purpose of the script is to extract the information from sources
+  related to internationalization (the translator classes). It uses the
+  information to generate documentation (language.doc,
+  translator_report.txt) from templates (language.tpl, maintainers.txt).
+  
+  Simply run the script without parameters to get the reports and
+  documentation for all supported languages. If you want to generate the
+  translator report only for some languages, pass their codes as arguments
+  to the script. In that case, the language.doc will not be generated.
+  Example:
+      
+    python translator.py en nl cz
+  
+  Originally, the script was written in Perl and was known as translator.pl.
+  The last Perl version was dated 2002/05/21
+ 
+                               Petr Prikryl (prikrylp@skil.cz)
+"""                               
+                               
+# History:
+# --------
+# 2002/05/21
+#  - This was the last Perl version. 
+# 2003/05/16
+#  - If the script is given list of languages, only the translator report
+#    is generated and only for those languages.
+# 
+################################################################
+
+import os, re, sys
+
+# Global informations are stored in the global 'info' dictionary.
+# This dictionary should be accessed only via GetInfo() because the first
+# call initializes the empty dictionary. (I was too lazy to create 
+# a singleton.)
+#
+info = {}
+
+def GetInfo():
+    """Returns reference to the info dictionary.
+    
+    If the dictionary is empty, it will be filled with some initial values.
+    """
+    
+    global info
+    
+    # If the dictionary with globally shared information is empty, then
+    # fill the static values.
+    if not info:
+        # Get the name of the script without the path and the path without name.
+        scriptpath, scriptname = os.path.split(os.path.abspath(sys.argv[0]))
+        info['scriptname'] = scriptname
+
+        # Determine the Doxygen's doc directory. If the DOXYGEN_DOCDIR
+        # environment variable is defined, then it says where the directory
+        # is. If it is not, then it will be directory where this script is
+        # placed.
+        docdir = os.getenv('DOXYGEN_DOCDIR', '*')
+        if docdir == '*':
+            docdir = scriptpath
+            
+        docdir = os.path.abspath(docdir)
+        info['docdir'] = docdir
+
+        # Doxygen's root directory is just one above the docdir.
+        doxygenrootdir = os.path.abspath(os.path.join(docdir, '..'))
+        info['doxygenrootdir'] = doxygenrootdir
+        
+        # Doxygen's src directory is just below its root.
+        info['srcdir'] = os.path.join(doxygenrootdir, 'src')
+        
+        # Doxygen's current version is read from the 'version' file in the root.
+        try:
+            fver = file(os.path.join(doxygenrootdir, 'version'))
+            doxversion = fver.readline().strip()
+            fver.close()
+            info['doxversion'] = doxversion
+        except IOError:
+            info['doxversion'] = 'unknown'
+            
+        
+        # Names of the template files and other intput files (template for 
+        # language.doc and the database of local language maintainers).
+        info['flangtplname'] = 'language.tpl'
+        info['flangtpl'] = os.path.join(docdir, info['flangtplname'])  
+        info['fmaintainersname'] = 'maintainers.txt' 
+        info['fmaintainers'] = os.path.join(docdir, info['fmaintainersname']) 
+
+        # Names of the output files.
+        info['ftranslatortxtname'] = 'translator_rep.txt'
+        info['ftranslatortxt'] = os.path.join(docdir, info['ftranslatortxtname'])
+        info['flangdocname'] = 'language.doc'
+        info['flangdoc'] = os.path.join(docdir, info['flangdocname'])
+        
+        # If the script is given one or more arguments, they should be codes
+        # of languages (two letters). Convert them into lower case and
+        # build the list of them. Empty list will be interpreted as the request
+        # for processing all languages.
+        langlist = []
+        if len(sys.argv) > 1:
+            langlist = sys.argv[1:]
+        info['languages'] = langlist
+            
+        # Create the dictionary of the required method. Keys will be the unified
+        # method prototypes, values will be True (for easy testing).
+        info['required_methods'] = {}
+            
+    return info
+
+    
+def CopyTemplateToLanguageDoc():
+    """'flangtpl' + no src --> 'flangdoc' 
+    
+    The function takes the 'flangtpl' template and generates 'flangdoc'
+    without using information from other sources. This function is called
+    when source files were not found. The marks inside the template are
+    replaced by warning-like explanations that something could not be done
+    because sources were not available. Writes directly to the file, returns
+    nothing.
+    
+    If the script was called only for selected languages, the documentation
+    is not generated.
+    """
+
+    # Get the reference to the initialized info dictionary. If the script was
+    # called for selected languages, return immediately.
+    info = GetInfo()
+    if not info['langlist']:
+        return
+    
+    # Read the content of the template file.
+    fin = file(info['flangtpl'])
+    cont = fin.read()
+    fin.close()
+            
+    # Replace the template marks by some notices.
+    cont = re.sub(r'(?s)<notice>.+?</notice>', 
+           """Warning: this file was generated from the %(flangtplname)s template
+ *          by the %(scriptname)s script.  As doxygen sources were not available 
+ *          in that time, some information could not be extracted 
+ *          and inserted into this file.
+ *
+ *          Do not edit this file.  Edit the above mentioned files!""", cont)
+    
+    cont = re.sub(r'(?s)\$version', '%(doxversion)s', cont)
+    cont = re.sub(r'(?s)\$numlang', 
+        '<b>[number of supported languages could not be extracted -- no sources]</b>',
+        cont)
+            
+    cont = re.sub(r'(?s)\$languages', 
+        '<b>[names of languages could not be extracted -- no sources]</b>', cont)
+            
+    cont = re.sub(r'(?s)\$information_table',
+        '<b>[Information table could not be extracted -- no sources.]</b>', cont)
+            
+    cont = re.sub(r'(?s)\$translator_report_file_name',
+        '%(ftranslatortxt)s <b>[translator report could not be generated -- no sources]</b>',
+        cont)
+            
+    cont = re.sub(r'(?s)\$translator_report_link',
+        '<b>[no sources, no link]</b>', cont)
+
+    # Replace the generated marks by the info from the info dictionary.
+    #
+    cont = cont % info
+       
+    # Write the template with replacements to the output doc.
+    fout = file(info['flangdoc'], 'w')
+    fout.write(cont)
+    fout.close()
+
+    
+def GetPureVirtualFrom(filename):
+    """Returns the list of pure virtual method prototypes from the filename.
+    
+    Each method prototype is returned as one string, one line, one list item).
+    The input argument is the full name of the source file."""
+
+    # Read the content of the file to one string and remove C comments, 
+    # one line comments, leading text to the first 'virtual' keyword, 
+    # text behind the class, and finally empty lines.  
+    f = file(filename)
+    cont = f.read()
+    f.close()
+    
+    cont = re.sub(r'(?s)/\*.+?\*/', '', cont)   # C comments
+    cont = re.sub(r'(?m)//.*$', '', cont)       # C++ comments
+    cont = 'virtual ' + re.sub(r'(?s)^.+?virtual\s', '', cont) # prefix
+    cont = re.sub(r'(?s)};.+$', '', cont)       # suffix
+    cont = re.sub(r'(?s)\n\s*\n', r'\n', cont)  # empty lines
+    
+    # Remove the empty implementation of the updateNeededMessage() method
+    # which is to be implemented by adapters only, not by translators.
+    cont = re.sub(r'(?s)\s*virtual\s+QCString\s+updateNeededMessage.+?}.*?\n',
+                  '', cont)
+
+    # Erase anything between "=0;" and "virtual". Only the pure virtual 
+    # methods will remain.  Remove also the text behind the last "= 0;"
+    cont = re.sub(r'(?s)(=\s*0\s*;).*?(?P<vir>virtual)', r'=0;\n\g<vir>', cont)
+    cont = re.sub(r'(?s)^(?P<x>.+=\s*0\s*;).*$', r'\g<x>', cont)
+
+    # Replace all consequent white spaces (including \n) by a single 
+    # space. Strip also the leading and the trailing space.
+    cont = re.sub(r'(?s)\s+', ' ', cont)
+    cont = cont.strip()
+    
+    # Split internally the string into lines by replacing the '= 0;' by '\n'.
+    # Keep the string stil as one multiline string.
+    cont = re.sub(r'(?s)\s*=\s*0\s*;\s*', r'\n', cont)
+
+    # Remove the keyword 'virtual' because the derived classes may not use it.
+    cont = re.sub(r'(?m)^virtual\s+', '', cont)
+
+    # Split the string to the list of striped lines. Do strip the string 
+    # first so that no empty line list item is generated.
+    L = cont.strip().split('\n')
+    
+    # Build the list of unified prototypes and return it. 
+    return L 
+    
+def StripArgIdentifiers(prototype):
+    """Returns the method prototype without argument identifiers.
+    
+    The goal of the function is to get only the necessary, single form 
+    of the method prototype. This way the prototypes from derived classes
+    can be compared one by one with the methods in the base class."""
+    
+    # Parse the prototype, and split the string of arguments it can be empty).
+    m = re.match(r'^(?P<prefix>.+?)\((?P<args>.*?)\)(?P<suffix>.*)$', prototype)
+    str_prefix = m.group('prefix')
+    str_args = m.group('args')
+    str_suffix = m.group('suffix')
+    args = str_args.split(',')
+        
+    # Each argument will be stripped and put to the new list. Only the types
+    # are important. Using the spaces has to be normalized because people
+    # differ in opinion where to put spaces. Let's prepare regular 
+    # expressions for the tasks.
+    rex_type = re.compile(r'''^(?P<type>        # name of the type group
+                                \s*             # there can be spaces behind comma,
+                                (const\s+)?     # possibly const at the beginning
+                                [A-Za-z0-9_:]+  # type identifier can be qualified
+                                (\s*[*&])?      # could be reference or pointer
+                               )                # ... the above is important,
+                              .*$''',           # the rest contains the identifier
+                          re.VERBOSE)
+                          
+    # People may differ in opinion whether a space should or should not 
+    # be written between a type identifier and  the '*' or '&' (when 
+    # the argument is a pointer or a reference).
+    rex_norm = re.compile(r'\s*(?P<x>[*&])')
+                                  
+    # Strip each of the arguments and put them to the 'stripped' list.
+    # Only the type of the identifier is important. Extract it, normalize 
+    # the using of spaces, and append the result to the list of striped
+    # arguments. (Sequence of more than one space is solved later.)
+    stripped = []
+    for arg in args:
+        arg = rex_type.sub(r'\g<type>', arg)
+        arg = rex_norm.sub(r' \g<x>', arg)
+        stripped.append(arg)
+    
+    # Join the stripped arguments into one line again, and build the striped
+    # form of the prototype. Remove the duplicit spaces.
+    result = re.sub(r'\s+', ' ', 
+                    str_prefix + '(' + ', '.join(stripped) + ')' + str_suffix) 
+
+    return result
+
+def GetInfoFrom(input_filename):
+    """Returns list of info related to the parsed file.
+    
+    GetInfoFrom returns the list of information related to the
+    parsed source file.  The input argument is the name of the 
+    translator_xx.h file including path. 
+    
+    The output list contains the following items:
+     - class identifier
+     - base class identifier
+     - method prototypes (each in a separate item)"""
+     
+    # Let's open the file and read it into a single string.
+    f = file(input_filename)
+    cont = f.read()
+    f.close()
+    
+    # Remove comments and empty lines.
+    cont = re.sub(r'(?m)//.*$', '', cont)       # C++ comments
+    cont = re.sub(r'(?s)/\*.+?\*/', '', cont)   # C comments
+    cont = re.sub(r'(?s)\n\s*\n', r'\n', cont)  # empty lines
+
+    # Extract the class and base class identifiers.
+    rex = re.compile(r'''^.*class\s+
+                         (?P<class>Translator\w+?)\s*:
+                         \s*public\s+(?P<base>\w+)\b
+                         ''', re.VERBOSE | re.DOTALL)
+    m = rex.match(cont)
+    assert(m)
+    assert(m.group('class'))
+    assert(m.group('base'))
+    
+    # Put the class and the base class into the output list.
+    result = [m.group('class'), m.group('base')]
+    
+    # Remove the opening curly brace.  Remove also the first "public:"
+    cont = re.sub(r'(?s)^.*?{', '', cont)
+    cont = re.sub(r'(?s)(^.*\spublic:\s+)?', '', cont)
+    
+    # Cut the things after the class.
+    cont = re.sub(r'(?s)}\s*;\s*#endif\s*$', '', cont)
+    
+    # Remove the "virtual" keyword, because the derived class is not forced 
+    # to use it.
+    cont = re.sub(r'\bvirtual\s+', '', cont)
+
+    # Remove all strings from lines.
+    cont = re.sub(r'(?s)".*?"', '', cont)
+    
+    # Remove all bodies of methods
+    while cont.find('{') >= 0:
+        cont = re.sub(r'(?s){[^{}]+?}', '', cont)
+    
+    # Remove all private methods, i.e. from "private:" to "public:"
+    # included.  Later, remove also all from "private:" to the end.
+    cont = re.sub(r'(?s)\bprivate\s*:.*?\bpublic\s*:', '', cont)
+    cont = re.sub(r'(?s)\bprivate\s*:.*$', '', cont)
+
+    # Some of the translators use conditional compilation where 
+    # the branches define the body of the method twice.  Remove
+    # the ifdef/endif block content.
+    cont = re.sub(r'(?s)#ifdef.*?#endif', '', cont)
+    
+    # Now the string should containt only method prototypes. Let's unify
+    # their format by removing all spaces that are not necessary.
+    cont = re.sub(r'\s+', ' ', cont)
+    cont = re.sub(r'^\s+', '', cont)
+    cont = re.sub(r'\s+$', '', cont)
+    
+    # Then let's put all of them on separate lines (one protototype -- 
+    # one line; no empty lines).
+    cont = re.sub(r'\s+\(', '(', cont)
+    cont = re.sub(r'(?s)\)\s*', ')\n', cont)
+
+    # Split the string, add it to the output list, and return the result.
+    result.extend(cont.strip().split('\n'))
+    return result
+    
+    
+def GetAdapterClassesInfo(required):
+    """Returns the list of strings with information  related to the adapter classes.
+    
+    Each one-line string contains the identifier of the adapter class and
+    the number of required methods that are implemented by the adapter.
+    
+    The function takes one agument -- the reference to the hash with
+    stripped prototypes of the required methods."""
+
+    # Let's open the file with the translator adapter classes.
+    info = GetInfo()
+    filename = os.path.join(info['srcdir'], 'translator_adapter.h')
+    f = file(filename)
+    cont = f.read()
+    f.close()
+
+    # Remove the preprocessor directives.
+    cont = re.sub(r'(?m)^\s*#\w+.+$', '', cont)
+    
+    # Remove comments and empty lines.
+    cont = re.sub(r'(?m)//.*$', '', cont)       # C++ comments
+    cont = re.sub(r'(?s)/\*.+?\*/', '', cont)   # C comments
+    cont = re.sub(r'(?s)\n\s*\n', r'\n', cont)  # empty lines
+
+    # Place delimiters to separate the classes, and remove 
+    # the TranslatorAdapterBase class.
+    #
+    cont = re.sub(r'(?s)};\s*class\s+', '<class>', cont)
+    cont = re.sub(r'(?s)class\s+TranslatorAdapterBase\s+.+?<class>', '<class>', cont)
+    cont = re.sub(r'(?s)};', '', cont)
+    
+    # Remove the base classes and the beginning of the the class definitions.
+    cont = re.sub(r'(?s)(TranslatorAdapter[_0-9]+)\s*:.+?{\s*(public\s*:)?', 
+                  '\g<1>', cont)
+
+    # Remove all bodies of methods
+    while cont.find('{') >= 0:
+        cont = re.sub(r'(?s){[^{}]+?}', '', cont)
+
+    # Remove the "virtual" keywords.
+    cont = re.sub(r'(?m)^\s*virtual\s+', '', cont)
+
+    # Remove the empty lines.
+    cont = re.sub(r'(?s)\n\s*\n', '\n', cont)
+
+    # Trim the spaces.
+    cont = re.sub(r'(?m)^\s+', '', cont)
+    cont = re.sub(r'(?m)\s+$', '', cont)
+    
+    # Split the string into the lines again.
+    content = cont.split('\n')
+
+    # Now the list contains only two kinds of lines.  The first
+    # kind of lines starts with the <class> tag and contains the
+    # identifier of the class.  The following lines list the
+    # non-stripped prototypes of implemented methods without the
+    # "virtual" keyword.
+    #
+    # Now we will produce the result by looping through all the
+    # lines and counting the prototypes of the required methods
+    # that are implemented by the adapter class.
+    #
+    cinfo = ''
+    cnt = 0
+    methods = ''
+    result = []
+
+    rex_class = re.compile(r'^<class>(?P<class>\w+)\s*$')     
+    for line in content:
+        m = rex_class.match(line)
+        if m:
+            # Another adapter class found. 
+            adapter_class = m.group('class')
+            
+            # If the cinfo is not empty then it contains partial
+            # information about the previously processed adapter. 
+            if cinfo !=  '':
+                # Complete the cinfo and push it into the result.
+                s = ''
+                if cnt != 1: 
+                    s = 's'
+                cinfo += '\timplements %2d required method%s...\n' % (cnt, s)
+                result.append(cinfo + methods)
+            
+            # Initialize the counter and store the adapter class identifier
+            # in the cinfo.
+            #
+            cinfo = adapter_class
+            cnt = 0;
+            methods = ''
+        else:
+            # The line contains the prototype of the implemented method.
+            # If it is the required method, count it, and add it to the 
+            # string of methods.
+            stripped_prototype = StripArgIdentifiers(line)
+
+            if required.has_key(stripped_prototype): 
+                cnt += 1
+                methods += '    %s\n' % line
+    
+    # If the cinfo is not empty then it contains partial
+    # information about the last processed adapter. 
+    if cinfo != '':
+        # Complete the cinfo and push it into the @result.
+        s = ''
+        if cnt != 1: 
+            s = 's'
+        cinfo += '\timplements %2d required method%s...\n' % (cnt, s)
+        result.append(cinfo + methods)
+
+    # Return the result list.
+    return result
+
+
+def GetLanguagesInfo(seq_or_dic):
+    """Returns (numlang, langlst, formated langstr).
+    
+    The numlang is the number of supported languages. The langlst is the 
+    list of pairs like ('TranslatorBrazilian', 'Brazilian Portuguese')
+    """
+    
+    languages = []               
+    for k in seq_or_dic:
+        # Remove the 'Translator' prefix from the class name to obtain
+        # the brief name of the language.
+        assert(k[:len('Translator')] == 'Translator')
+        lang = k[len('Translator'):]
+        
+        # Do correction of the language name for the selected languages.
+        if lang == 'Brazilian':           lang = 'Brazilian Portuguese'
+        if lang == 'Chinesetraditional':  lang = 'Chinese Traditional'
+
+        # Append the language to the list.
+        languages.append((k, lang))
+        
+    # Sort the languages and construct the output string. Insert new line
+    # after each line. Add the 'and' before the last language
+    languages.sort()
+    count = 0
+    output = ''
+    for L in languages:
+        output += L[1]                     # readable form of the language
+        count += 1
+        
+        if count < len(languages) - 1:     # separate by comma
+            output += ', '
+        elif count == len(languages) - 1:  # separate by comma and 'and'
+            output += ', and '
+        
+        if count % 5 == 0:
+            output += '\n'
+
+    return (len(languages), languages, output)
+    
+    
+def GenerateLanguageDoc(cb):
+    """Generates the content as expected in the 'flangdoc' file.
+    
+    GenerateLanguageDoc takes document templates and code sources
+    generates the content as expected in the 'flangdoc' file (the
+    part of the Doxygen documentation), and returns the result as a
+    string.
+    
+    The input parameter is the reference to the class/base dictionary."""
+    
+    # Define templates for HTML table parts of the documentation.
+    htmlTableHead = r'''\htmlonly
+<TABLE ALIGN=center CELLSPACING=0 CELLPADDING=0 BORDER=0>
+<TR BGCOLOR="#000000">
+<TD>
+  <TABLE CELLSPACING=1 CELLPADDING=2 BORDER=0>
+  <TR BGCOLOR="#4040c0">
+  <TD ><b><font size=+1 color="#ffffff"> Language </font></b></TD>
+  <TD ><b><font size=+1 color="#ffffff"> Maintainer </font></b></TD>
+  <TD ><b><font size=+1 color="#ffffff"> Contact address </font>
+          <font size=-2 color="#ffffff">(remove the NOSPAM.)</font></b></TD>
+  <TD ><b><font size=+1 color="#ffffff"> Status </font></b></TD>
+  </TR>
+'''
+  
+    htmlTableRow = r'''  <TR BGCOLOR="#ffffff">
+      <TD>$lang</TD>  
+      <TD>$maintainer</TD>
+      <TD>$email</TD>
+      <TD>$status</TD>
+  </TR>
+'''
+
+    htmlTableFoot = r'''  </TABLE>
+</TD>
+</TR>
+</TABLE>
+\endhtmlonly
+'''
+    
+    # Define templates for LaTeX table parts of the documentation.
+    latexTableHead = r'''\latexonly
+\begin{tabular}{|l|l|l|l|}
+  \hline 
+  {\bf Language} & {\bf Maintainer} & {\bf Contact address} & {\bf Status} \\
+  \hline
+'''
+  
+    latexTableRow = r'''  $lang & $maintainer & {\tt $email} & $status \\
+'''
+
+    latexTableFoot = r'''  \hline
+\end{tabular}
+\endlatexonly
+'''
+
+    # Read the template of the documentation, and join the content
+    # to a single string.
+    info = GetInfo()
+    filename = os.path.join(info['docdir'], info['flangtpl'])
+    f = file(filename)
+    output = f.read()
+    f.close()
+    
+    # Get the number of languages, list of their names and formated string
+    # with the list in human readable English form.
+    (numlang, langlst, langstr) = GetLanguagesInfo(cb)
+    
+    # Substitute the marks inside the template.
+    output = re.sub(r'(?s)\$version', info['doxversion'], output)
+    output = re.sub(r'(?s)\$numlang', str(numlang), output)
+    output = re.sub(r'(?s)\$languages', langstr, output)
+
+    # Create the dictionary for info for each language.
+    langinfo = {}
+    for (trClass, langname) in langlst:
+        langinfo[langname] = cb[trClass] + '<msep/>unknown: unknown'
+
+    # Read the information related to maintainers into the
+    # string using suitable separators -- one line, one language. #{{{
+    filename = os.path.join(info['docdir'], info['fmaintainers'])
+    print filename
+    f = file(filename)
+    maintainers = f.read()
+    f.close()
+    
+    # Trim the spaces on the lines.  Strip the comment lines that
+    # start with % sign.
+    maintainers = re.sub(r'(?m)^[ \t]+', '', maintainers)    
+    maintainers = re.sub(r'(?m)[ \t]+$', '', maintainers)    
+    maintainers = re.sub(r'(?m)^%.*$', '', maintainers)    
+    
+    # Join the information for one language into one line,
+    # and remove empty lines.
+    maintainers = re.sub(r'(?s)\b\n\b', '<sep/>', maintainers)
+    maintainers = re.sub(r'(?s)\n{2,}', '\n', maintainers)
+    maintainers = re.sub(r'(?s)^\n+', '', maintainers)
+    maintainers = re.sub(r'(?s)\n+$', '', maintainers)
+    
+    # Split the string back to the list, and update the information
+    # in the hash with information for languages.
+    lst = maintainers.split('\n')
+    lst.sort()
+    for line in lst:
+        # Split the line for one language to separate lines for
+        # the language and one or more maintainers.  Ensure that the language
+        # starts with uppercase and continues with lowercase. (It will be used
+        # for reconstructing the translator class identifier.)
+        linfo = line.split('<sep/>')
+        lang = linfo[0].capitalize()
+        del linfo[0]
+        
+        # Add information to the langinfo dictionary.  If the language
+        # was not defined in sources, add the question mark to the
+        # language identifier.
+        # 
+        if langinfo.has_key(lang): 
+            langinfo[lang] = cb['Translator' + lang] + '<msep/>' + \
+                             '<sep/>'.join(linfo)
+        else:
+            lang += ' (?)'
+            langinfo[lang] = 'unknown<msep/>' + '<sep/>'.join(linfo)
+
+    # Now, the langinfo dictionary contains all the information needed for
+    # generating the tables (HTML and LaTeX).  Define string variables
+    # for each of the tables, and initialize them.
+    #
+    tableHTML = htmlTableHead
+    tableLATEX = latexTableHead
+    
+    # Loop through sorted keys for the languages, parse the
+    # information, and add it to the tables.
+    langs = langinfo.keys()
+    langs.sort()
+    for lang in langs:
+        # Transform the key for the language into more human readable
+        # form.  Basically, only languages with two words are going to be
+        # corrected.
+        if lang == 'Brazilian':
+            lang_readable = 'Brazilian Portuguese'
+        elif lang == 'Chinesetraditional':
+            lang_readable = 'Chinese Traditional'
+        else:
+            lang_readable = lang
+            
+        print lang, lang_readable            
+    """
+        
+        # Read the line with info for the language and separate 
+        # the status. #{{{
+        #
+        my @list = split(/<msep\/>/, $language{$lang});
+        my $status = shift @list;
+        
+        my $i = $status =~ s{^Translator$}{up-to-date};
+
+        if ($i == 0) { 
+            $i = $status =~ s{^TranslatorAdapter_(\d)_(\d)_(\d)}
+                             {$1.$2.$3}x;
+        }
+        
+        if ($i == 0) { 
+            $i = $status =~ s{^TranslatorEnglish$}
+                             {obsolete}x;
+        }
+        
+        if ($i == 0) { $status = 'strange'; }
+        
+        ##}}}
+        
+        # Split the rest of the list (should be a single item) into
+        # the list with one or more maintainers -- one line, one
+        # maintainer. #{{{
+        #
+        my $rest = shift @list;
+        @list = split(/<sep\/>/, $rest);
+        ##}}}
+        
+        # In HTML table, maintainer names are placed in the same
+        # cell.  Also their e-mails are placed in a single cell.
+        # Extract the string with concatenated names and the string
+        # with concatenated e-mails.  Add the row to the HTML
+        # table. #{{{
+        #
+        my $name = '';
+        my $email = '';
+
+        foreach my $maintainer (@list) {
+        
+            if ($name ne '') { $name .= '<br>'; }
+            if ($email ne '') { $email .= '<br>'; }
+
+            $maintainer =~ m{^\s*(.+?)\s*:\s*(.+?)\s*$};
+        
+            $name .= $1;
+            $email .= $2;
+        }
+        
+        # Prepare the HTML row template, modify it, and add the
+        # result to the HTML table.
+        #
+        my $item = $htmlTableRow;
+        
+        $item =~ s{\$lang}{$lang_readable};
+        $item =~ s{\$maintainer}{$name};
+        $item =~ s{\$email}{$email};
+        $item =~ s{\$status}{$status};
+        
+        $tableHTML .= $item;        
+        
+        ##}}}
+        
+        # For LaTeX, more maintainers for the same language are
+        # placed on separate rows in the table.  The line separator
+        # in the table is placed explicitly above the first
+        # maintainer.  Add rows for all maintainers to the LaTeX
+        # table. #{{{
+        #
+        # Prepare the LATEX row template, modify it, and add the
+        # result to the LATEX table.
+        #
+        $item = $latexTableRow;
+
+        my $first = shift @list;  # the first maintainer.
+        $first =~ m{^\s*(.+?)\s*:\s*(.+?)\s*$};
+        
+        $name = $1;
+        $email = $2;
+        
+        $item =~ s{\$lang}{$lang_readable};
+        $item =~ s{\$maintainer}{$name};
+        $item =~ s{\$email}{$email};
+        $item =~ s{\$status}{$status};
+        
+        $tableLATEX .= "  \\hline\n" . $item;        
+        
+        # List the other maintainers for the language. Do not set
+        # lang and status for them.
+        #
+        while (@list) {
+            my $next = shift @list;
+            $next =~ m{^\s*(.+?)\s*:\s*(.+?)\s*$};
+        
+            my $name = $1;
+            my $email = $2;
+            my $item = $latexTableRow;
+        
+            $item =~ s{\$lang}{};
+            $item =~ s{\$maintainer}{$name};
+            $item =~ s{\$email}{$email};
+            $item =~ s{\$status}{};
+        
+            $tableLATEX .= $item;        
+        }
+        ##}}}
+    }
+    ##}}}
+    
+    # Finish the tables, and substitute the mark in the doc
+    # template by the concatenation of the tables.  Add NOSPAM to
+    # email addresses in the HTML table.  Replace the special
+    # character sequences. #{{{
+    #
+    $tableHTML .= $htmlTableFoot;
+    $tableLATEX .= $latexTableFoot;
+
+    $tableHTML =~ s{@}{\@NOSPAM.}sg; 
+    $tableHTML =~ s{&ccaron;}{&#x010d;}sg; 
+    $tableHTML =~ s{&rcaron;}{&#x0159;}sg; 
+    
+    $tableLATEX =~ s/&aacute;/\\'{a}/sg;
+    $tableLATEX =~ s/&auml;/\\"{a}/sg;
+    $tableLATEX =~ s/&ouml;/\\"{o}/sg;
+    $tableLATEX =~ s/&oslash;/\\o{}/sg;
+    $tableLATEX =~ s/&ccaron;/\\v{c}/sg;
+    $tableLATEX =~ s/&rcaron;/\\v{r}/sg;
+    $tableLATEX =~ s/_/\\_/sg;
+    
+    $output =~ s{\$information_table}{$tableHTML$tableLATEX};
+
+    ##}}}
+
+    # Replace the other symbols in the template by the expected
+    # information. ##{{{
+    #
+    $output =~ s{\$version}{$doxversion};
+
+    $output =~ s{\$translator_report_file_name}
+                {<code>doxygen/doc/$ftranslatortxt</code>}x;
+
+    $output =~ s{\$translator_report_link}
+                {<a href=\"../doc/$ftranslatortxt\">
+                 <code>doxygen/doc/$ftranslatortxt</code></a>}x;
+    ##}}}
+
+    # Replace the introduction notice in the output. #{{{
+    #
+    $output =~ s{<notice>.+?</notice>}
+{Warning: this file was generated from the $flangtpl template
+ *          and the $fmaintainers files by the $0 script.  
+ *
+ *          Do not edit this file.  Edit the above mentioned files!}sx;
+    ##}}}
+
+    # Return the content of the generated output file.
+    #
+    return $output;
+}
+"""
+    return output
+    
+    
+################################################################# Body
+if __name__ == '__main__':
+    # Get the reference to the initialized dictionary with the shared info. 
+    info = GetInfo()
+    
+    # File with the translator base class must be present.  Exit otherwise,
+    # but be kind to those who already have the documentation
+    # generated by this script ready, but who do not have sources. 
+    # If no 'flangdoc' is present, copy the template to it.
+    if not os.path.isfile(os.path.join(info['srcdir'], 'translator.h')):
+        sys.stderr.write(('\nThe %(scriptname)s warning:\n' +
+                         '\tThe translator.h not found in %(srcdir)s.\n' +
+                         '\tThe %(ftranslatortxtname)s will not be ' +
+                         "generated (you don't need it).\n") % info)
+
+        # $flangdoc is not present, copy the template to it, and do the simplified
+        # replacement of the markers inside the template. Generate the warning
+        # about 'flangdoc' content.
+        if not os.path.isfile(info['flangdoc']):
+            CopyTemplateToLanguageDoc();
+            sys.stderr.write(('\nThe %(scriptname)s warning:\n' +
+                  "\tThe %(flangdoc)s not found in the '%(docdir)s' directory.\n" +
+                  '\tThe %(flangtpl)s template content copied into it.\n' +
+                  '\tAs the sources are not available, some information\n' +
+                  '\tcould not be extracted and inserted into %(flangdoc)s.\n') % info)
+
+        # Exit as if nothing happened.
+        sys.exit(0)
+
+    # Create the list of all translator_xxxx.h file names. If the script was
+    # given a list of languages (two letters for each language), then fill
+    # the list only by the translator files for the languages.
+    directory = info['srcdir']
+    langlist = info['languages']
+    if langlist:
+        files = [os.path.join(directory, 'translator_%s.h' % lang)
+                 for lang in langlist
+                 if os.path.isfile(os.path.join(directory, 
+                                                'translator_%s.h' % lang))]
+    else:
+        rex_tr = re.compile(r'^translator_\w\w\w?\.h$', re.IGNORECASE)
+        files = [os.path.join(directory, f) 
+                 for f in os.listdir(directory) 
+                 if os.path.isfile(os.path.join(directory, f)) 
+                    and rex_tr.match(f)]
+
+    # Get only the pure virtual methods from the Translator class
+    # into a list for later testing present/not present.
+    expected_lst = GetPureVirtualFrom(os.path.join(info['srcdir'], 
+                                                   'translator.h'))
+    # Fill the 'required_methods' dictionary for unified form 
+    # of the prototypes.
+    required = info['required_methods']
+    for method in expected_lst:
+        prototype = StripArgIdentifiers(method)
+        required[prototype] = True
+
+    # The details for translators will be collected into the output
+    # string. If some details are listed for a translator, the flag
+    # will be set to produce possible warning to the list of
+    # up-to-date translators.
+    output = ''
+    details = {}
+    
+    # Collect base classes of translators in the hash. CB stands
+    # for Class and Base.
+    cb = {}
+        
+    # Loop through all translator files.  Extract the implemented
+    # virtual methods and compare it with the requirements. Prepare
+    # the output.
+    rex_trAdapter = re.compile(r'^TranslatorAdapter_')
+    rex_trEN = re.compile(r'^TranslatorEnglish$')
+    
+    for filename in files:
+        # Get the information from the sources.  Remember the base
+        # class for each of the classes.  Clear the flag for
+        # details for the class.
+        finfo = GetInfoFrom(filename)
+        (class_, base_) = finfo[0:2]
+        cb[class_] = base_
+        details[class_] = False
+        
+        # Set the value of the required methods to 1 (true).  Let
+        # this indicate that the method was not defined in the
+        # translator class.
+        for method in required:
+            required[method] = True
+
+        # Loop through all items and compare the prototypes. Mark
+        # the implemented method and collect the old ones.
+        old_methods = []
+        for method in finfo[2:]:
+            # Get only the necessary form of the prototype.
+            prototype = StripArgIdentifiers(method)
+            
+            # Mark as recognized when the prototype is required.
+            # Otherwise, remember it as old method which is
+            # implemented, but not required.
+            if (required.has_key(prototype)): 
+                required[prototype] = False       # satisfaction
+            else:
+                old_methods.append(method)
+        
+        # Loop through the list of expected methods and collect 
+        # the missing (new) methods.  Do this only when it derives
+        # from Translator or TranslatorAdapter classes (i.e. ignore
+        # any unusual kind of TranslatorXxxx implementation). 
+        # Accept also deriving from TranslatorEnglish, that can
+        # be done by doxygen developers to solve problems with
+        # some really outdated translators.
+        missing_methods = []
+        if rex_trAdapter.match(base_) or rex_trEN.match(base_):
+            
+            for method in expected_lst:
+                # Get the stripped version of the prototype.
+                prototype = StripArgIdentifiers(method) 
+                
+                # If the prototype is stored in the required
+                # table, and if it was not marked as implemented,
+                # then it should be.  It is a missing method.
+                #try:
+                if required[prototype]:
+                    missing_methods.append(method)
+
+        # The detailed output will be produced only when it is needed.
+        if old_methods or missing_methods or rex_trAdapter.match(base_):
+            output += '\n\n\n'
+            output += '%s (%s)\n%s\n' % (class_, base_, '-' * len(class_))
+            
+            if rex_trEN.match(base_):
+                output += '''
+This translator is implemented via deriving from the English translator.
+This should be done only in the case when the language maintainer
+or the doxygen developers need to update some really old-dated translator.
+Otherwise, deriving from the translator adapter classes should be used
+for obsolete translators.  If you still want some texts to be in English
+copy the sources of the English translator.
+
+The obsolete and missing method lists (below) reflect what have to be done
+to derive directly from the Translator class (i.e. to reach up-to-date status).
+'''
+
+            elif not rex_trAdapter.match(base_):
+                output += '''
+This is some unusual implementation of the translator class.  It is derived
+from the %s base class. The usual translator class derives
+or from the Translator class or from some TranslatorAdapter_x_x_x classes.
+Because of that, nothing can be guessed about missing or obsolete methods.
+''' % base_
+                
+            if missing_methods:
+                output += '\nMissing methods (should be implemented):\n\n'
+                for m in missing_methods:
+                    output += '  ' + m + '\n'
+
+            if old_methods:
+                output += '\nObsolete methods (should be removed):\n\n'
+                old_methods.sort()
+                for m in old_methods:
+                    output += '  ' + m + '\n'
+                
+            # Some details were listed, set the details flag for the class.
+            details[class_] = 1;
+
+
+    # Generate the ASCII output file.
+    fout_name = info['ftranslatortxt']
+    
+    # Open it first, and output the version information.
+    fout = file(fout_name, 'w')
+    fout.write('(version %s)\n\n' % info['doxversion'])
+
+    # List the supported languages.
+    (numlang, langlst, langstr) = GetLanguagesInfo(cb)
+    fout.write('Doxygen supports the following (' + str(numlang) +
+               ') languages (sorted alphabetically):\n\n')
+    fout.write(langstr + '.\n')
+    
+    # If there are up-to-date translators, list them.
+    L = [k for k in cb if cb[k] == 'Translator']
+    L.sort()
+    
+    if L:
+        fout.write('\n' + '-' * 70 + '\n')
+        fout.write('''The \
+following translator classes are up-to-date (sorted alphabetically).
+This means that they derive from the Translator class.  Anyway, there still
+may be some details listed even for the up-to-date translators.
+Please, check the text below if the translator is marked so.
+
+''')
+        for tr in L: 
+            # Print the class name.  If some details were listed for 
+            # the translator class, add a notice.
+            fout.write('  ' + tr)
+            if details[tr]:
+                fout.write('\t-- see details below in the report') 
+            fout.write('\n')
+            
+    # If there are obsolete translators, list them.
+    L = [k for k in cb if rex_trAdapter.match(cb[k])]
+    L.sort()
+
+    if L:
+        fout.write('\n' + '-' * 70 + '\n')
+        fout.write('''The \
+following translator classes are obsolete (sorted alphabetically).
+This means that they derive from some of the adapter classes.
+
+''')
+        for tr in L:
+            fout.write('  %s\t(%s)\n' % (tr, cb[tr]))        
+
+    # If there are translators derived from TranslatorEnglish, list them
+    # and name them as really obsolete.
+    L = [k for k in cb if cb[k] == 'TranslatorEnglish']
+    L.sort()
+    if L:
+        fout.write('\n' + '-' * 70 + '\n')
+        fout.write('''The \
+following translator classes are implemented via deriving
+from the English translator.  This should be done only in the case
+when the language maintainer or the doxygen developers need to update
+some really outdated translator.  Otherwise, deriving from
+the translator adapter classes should be prefered for obsolete translators.
+See details below in the report.
+
+''')
+        for tr in L:
+            fout.write('  %s\t(%s)\n' % (tr, cb[tr]))        
+
+    # If there are other translators, list them. #{{{
+    #
+    L = [k for k in cb 
+         if not rex_trAdapter.match(cb[k])
+            and cb[k] != 'TranslatorEnglish'
+            and cb[k] != 'Translator'
+        ]
+    L.sort()
+    
+    if L:
+        fout.write('\n' + '-' * 70 + '\n')
+        fout.write('''The \
+following translator classes are somehow different
+(sorted alphabetically).  This means that they do not derive from
+the Translator class, nor from some of the adapter classes,
+nor from the TranslatorEnglish.  Nothing can be guessed about the methods.
+
+''')
+        for tr in L:
+            fout.write('  %s\t(%s)\n' % (tr, cb[tr]))        
+
+    # List all the translator adapter classes to show for which versions
+    # the adapters had to be created.  Show, how many and what new methods
+    # are implemented by the adapters.
+    #
+    fout.write('\n' + '-' * 70 + '\n')
+    fout.write('''The \
+following translator adapter classes are implemented -- the older (with
+lower number) are always derived from the newer. They implement the
+listed required methods. Notice that some versions of doxygen did not
+introduce any changes related to the language translators.  From here you may
+guess how much work should be done to update your translator:
+
+''')
+    adapter_info = GetAdapterClassesInfo(required)
+    
+    for ad in adapter_info:
+        fout.write('  %s\n' % ad)
+    
+    # List the methods that are expected to be implemented.
+    fout.write('\n' + '-' * 70 + '\n')
+    fout.write('''Localized \
+translators are expected to implement the following methods
+(prototypes sorted aplhabetically):
+
+''')
+
+    expected_lst.sort()
+    for m in expected_lst:
+        fout.write('%s\n' % m)
+
+    # If there are some details for the translators, show them.
+    if output != '':
+        fout.write('\n\n' + '=' * 70 + '\n')
+        fout.write('Details related to specific translator classes follow.\n')
+        fout.write(output + '\n')
+
+    # Close the ASCII output file
+    fout.close()
+        
+    # Generate the same using the original perl script.
+    os.system('translator.pl')    
+        
+    # Generate the language.doc file.  
+    filename = os.path.join(info['docdir'], info['flangdoc'])
+    f = file(filename, 'w')
+    f.write(GenerateLanguageDoc(cb))
+    f.close()
+
+    sys.exit(0)