diff options
| -rw-r--r-- | CVSROOT/checkoutlist | 13 | ||||
| -rw-r--r-- | CVSROOT/commitinfo | 15 | ||||
| -rw-r--r-- | CVSROOT/editinfo | 21 | ||||
| -rw-r--r-- | CVSROOT/loginfo | 26 | ||||
| -rw-r--r-- | CVSROOT/notify | 12 | ||||
| -rw-r--r-- | CVSROOT/rcsinfo | 13 | ||||
| -rw-r--r-- | CVSROOT/taginfo | 20 | ||||
| -rw-r--r-- | CVSROOT/verifymsg | 21 |
8 files changed, 141 insertions, 0 deletions
diff --git a/CVSROOT/checkoutlist b/CVSROOT/checkoutlist new file mode 100644 index 0000000..b04b350 --- /dev/null +++ b/CVSROOT/checkoutlist @@ -0,0 +1,13 @@ +# The "checkoutlist" file is used to support additional version controlled +# administrative files in $CVSROOT/CVSROOT, such as template files. +# +# The first entry on a line is a filename which will be checked out from +# the corresponding RCS file in the $CVSROOT/CVSROOT directory. +# The remainder of the line is an error message to use if the file cannot +# be checked out. +# +# File format: +# +# [<whitespace>]<filename><whitespace><error message><end-of-line> +# +# comment lines begin with '#' diff --git a/CVSROOT/commitinfo b/CVSROOT/commitinfo new file mode 100644 index 0000000..b19e7b7 --- /dev/null +++ b/CVSROOT/commitinfo @@ -0,0 +1,15 @@ +# The "commitinfo" file is used to control pre-commit checks. +# The filter on the right is invoked with the repository and a list +# of files to check. A non-zero exit of the filter program will +# cause the commit to be aborted. +# +# The first entry on a line is a regular expression which is tested +# against the directory that the change is being committed to, relative +# to the $CVSROOT. For the first match that is found, then the remainder +# of the line is the name of the filter to run. +# +# If the repository name does not match any of the regular expressions in this +# file, the "DEFAULT" line is used, if it is specified. +# +# If the name "ALL" appears as a regular expression it is always used +# in addition to the first matching regex or "DEFAULT". diff --git a/CVSROOT/editinfo b/CVSROOT/editinfo new file mode 100644 index 0000000..d78886c --- /dev/null +++ b/CVSROOT/editinfo @@ -0,0 +1,21 @@ +# The "editinfo" file is used to allow verification of logging +# information. It works best when a template (as specified in the +# rcsinfo file) is provided for the logging procedure. Given a +# template with locations for, a bug-id number, a list of people who +# reviewed the code before it can be checked in, and an external +# process to catalog the differences that were code reviewed, the +# following test can be applied to the code: +# +# Making sure that the entered bug-id number is correct. +# Validating that the code that was reviewed is indeed the code being +# checked in (using the bug-id number or a seperate review +# number to identify this particular code set.). +# +# If any of the above test failed, then the commit would be aborted. +# +# Actions such as mailing a copy of the report to each reviewer are +# better handled by an entry in the loginfo file. +# +# One thing that should be noted is the the ALL keyword is not +# supported. There can be only one entry that matches a given +# repository. diff --git a/CVSROOT/loginfo b/CVSROOT/loginfo new file mode 100644 index 0000000..5a59f0a --- /dev/null +++ b/CVSROOT/loginfo @@ -0,0 +1,26 @@ +# The "loginfo" file controls where "cvs commit" log information +# is sent. The first entry on a line is a regular expression which must match +# the directory that the change is being made to, relative to the +# $CVSROOT. If a match is found, then the remainder of the line is a filter +# program that should expect log information on its standard input. +# +# If the repository name does not match any of the regular expressions in this +# file, the "DEFAULT" line is used, if it is specified. +# +# If the name ALL appears as a regular expression it is always used +# in addition to the first matching regex or DEFAULT. +# +# You may specify a format string as part of the +# filter. The string is composed of a `%' followed +# by a single format character, or followed by a set of format +# characters surrounded by `{' and `}' as separators. The format +# characters are: +# +# s = file name +# V = old version number (pre-checkin) +# v = new version number (post-checkin) +# +# For example: +#DEFAULT (echo ""; id; echo %s; date; cat) >> $CVSROOT/CVSROOT/commitlog +# or +#DEFAULT (echo ""; id; echo %{sVv}; date; cat) >> $CVSROOT/CVSROOT/commitlog diff --git a/CVSROOT/notify b/CVSROOT/notify new file mode 100644 index 0000000..34f0bc2 --- /dev/null +++ b/CVSROOT/notify @@ -0,0 +1,12 @@ +# The "notify" file controls where notifications from watches set by +# "cvs watch add" or "cvs edit" are sent. The first entry on a line is +# a regular expression which is tested against the directory that the +# change is being made to, relative to the $CVSROOT. If it matches, +# then the remainder of the line is a filter program that should contain +# one occurrence of %s for the user to notify, and information on its +# standard input. +# +# "ALL" or "DEFAULT" can be used in place of the regular expression. +# +# For example: +#ALL mail %s -s "CVS notification" diff --git a/CVSROOT/rcsinfo b/CVSROOT/rcsinfo new file mode 100644 index 0000000..49e59f4 --- /dev/null +++ b/CVSROOT/rcsinfo @@ -0,0 +1,13 @@ +# The "rcsinfo" file is used to control templates with which the editor +# is invoked on commit and import. +# +# The first entry on a line is a regular expression which is tested +# against the directory that the change is being made to, relative to the +# $CVSROOT. For the first match that is found, then the remainder of the +# line is the name of the file that contains the template. +# +# If the repository name does not match any of the regular expressions in this +# file, the "DEFAULT" line is used, if it is specified. +# +# If the name "ALL" appears as a regular expression it is always used +# in addition to the first matching regex or "DEFAULT". diff --git a/CVSROOT/taginfo b/CVSROOT/taginfo new file mode 100644 index 0000000..274a46d --- /dev/null +++ b/CVSROOT/taginfo @@ -0,0 +1,20 @@ +# The "taginfo" file is used to control pre-tag checks. +# The filter on the right is invoked with the following arguments: +# +# $1 -- tagname +# $2 -- operation "add" for tag, "mov" for tag -F, and "del" for tag -d +# $3 -- repository +# $4-> file revision [file revision ...] +# +# A non-zero exit of the filter program will cause the tag to be aborted. +# +# The first entry on a line is a regular expression which is tested +# against the directory that the change is being committed to, relative +# to the $CVSROOT. For the first match that is found, then the remainder +# of the line is the name of the filter to run. +# +# If the repository name does not match any of the regular expressions in this +# file, the "DEFAULT" line is used, if it is specified. +# +# If the name "ALL" appears as a regular expression it is always used +# in addition to the first matching regex or "DEFAULT". diff --git a/CVSROOT/verifymsg b/CVSROOT/verifymsg new file mode 100644 index 0000000..86f747c --- /dev/null +++ b/CVSROOT/verifymsg @@ -0,0 +1,21 @@ +# The "verifymsg" file is used to allow verification of logging +# information. It works best when a template (as specified in the +# rcsinfo file) is provided for the logging procedure. Given a +# template with locations for, a bug-id number, a list of people who +# reviewed the code before it can be checked in, and an external +# process to catalog the differences that were code reviewed, the +# following test can be applied to the code: +# +# Making sure that the entered bug-id number is correct. +# Validating that the code that was reviewed is indeed the code being +# checked in (using the bug-id number or a seperate review +# number to identify this particular code set.). +# +# If any of the above test failed, then the commit would be aborted. +# +# Actions such as mailing a copy of the report to each reviewer are +# better handled by an entry in the loginfo file. +# +# One thing that should be noted is the the ALL keyword is not +# supported. There can be only one entry that matches a given +# repository. |