diff options
Diffstat (limited to 'src/config.xml')
| -rw-r--r-- | src/config.xml | 1383 |
1 files changed, 1383 insertions, 0 deletions
diff --git a/src/config.xml b/src/config.xml new file mode 100644 index 0000000..90b77b2 --- /dev/null +++ b/src/config.xml @@ -0,0 +1,1383 @@ +<doxygenconfig> + <group name='Project' docs='Project related configuration options'> + <option type='string' id='DOXYFILE_ENCODING' format='string' docs=' +This tag specifies the encoding used for all characters in the config file +that follow. The default is UTF-8 which is also the encoding used for all +text before the first occurrence of this tag. Doxygen uses libiconv (or the +iconv built into libc) for the transcoding. See +http://www.gnu.org/software/libiconv for the list of possible encodings. +' defval='UTF-8'/> + <option type='string' id='PROJECT_NAME' format='string' docs=' +The PROJECT_NAME tag is a single word (or a sequence of words surrounded +by quotes) that should identify the project. ' defval=''/> + <option type='string' id='PROJECT_NUMBER' format='string' docs=' +The PROJECT_NUMBER tag can be used to enter a project or revision number. +This could be handy for archiving the generated documentation or +if some version control system is used. +' defval=''/> + <option type='string' id='OUTPUT_DIRECTORY' format='dir' docs=' +The OUTPUT_DIRECTORY tag is used to specify the (relative or absolute) +base path where the generated documentation will be put. +If a relative path is entered, it will be relative to the location +where doxygen was started. If left blank the current directory will be used. +' defval=''/> + <option type='bool' id='CREATE_SUBDIRS' docs=' +If the CREATE_SUBDIRS tag is set to YES, then doxygen will create +4096 sub-directories (in 2 levels) under the output directory of each output +format and will distribute the generated files over these directories. +Enabling this option can be useful when feeding doxygen a huge amount of +source files, where putting all generated files in the same directory would +otherwise cause performance problems for the file system. +' defval='0'/> + <option type='enum' id='OUTPUT_LANGUAGE' defval='English' docs=' +The OUTPUT_LANGUAGE tag is used to specify the language in which all +documentation generated by doxygen is written. Doxygen will use this +information to generate all constant output in the proper language. +The default language is English, other supported languages are: +Afrikaans, Arabic, Brazilian, Catalan, Chinese, Chinese-Traditional, +Croatian, Czech, Danish, Dutch, Farsi, Finnish, French, German, Greek, +Hungarian, Italian, Japanese, Japanese-en (Japanese with English messages), +Korean, Korean-en, Lithuanian, Norwegian, Macedonian, Persian, Polish, +Portuguese, Romanian, Russian, Serbian, Serbian-Cyrilic, Slovak, Slovene, +Spanish, Swedish, and Ukrainian. +'> + <value name='Afrikaans'/> + <value name='Arabic'/> + <value name='Brazilian'/> + <value name='Catalan'/> + <value name='Chinese'/> + <value name='Chinese-Traditional'/> + <value name='Croatian'/> + <value name='Czech'/> + <value name='Danish'/> + <value name='Dutch'/> + <value name='English'/> + <value name='Finnish'/> + <value name='French'/> + <value name='German'/> + <value name='Greek'/> + <value name='Hungarian'/> + <value name='Italian'/> + <value name='Japanese'/> + <value name='Japanese-en'/> + <value name='Korean'/> + <value name='Korean-en'/> + <value name='Norwegian'/> + <value name='Farsi'/> + <value name='Persian'/> + <value name='Polish'/> + <value name='Portuguese'/> + <value name='Romanian'/> + <value name='Russian'/> + <value name='Serbian'/> + <value name='Slovak'/> + <value name='Slovene'/> + <value name='Spanish'/> + <value name='Swedish'/> + <value name='Ukrainian'/> + </option> + <option type='bool' id='BRIEF_MEMBER_DESC' docs=' +If the BRIEF_MEMBER_DESC tag is set to YES (the default) Doxygen will +include brief member descriptions after the members that are listed in +the file and class documentation (similar to JavaDoc). +Set to NO to disable this. +' defval='1'/> + <option type='bool' id='REPEAT_BRIEF' docs=' +If the REPEAT_BRIEF tag is set to YES (the default) Doxygen will prepend +the brief description of a member or function before the detailed description. +Note: if both HIDE_UNDOC_MEMBERS and BRIEF_MEMBER_DESC are set to NO, the +brief descriptions will be completely suppressed. +' defval='1'/> + <option type='list' id='ABBREVIATE_BRIEF' format='string' docs=' +This tag implements a quasi-intelligent brief description abbreviator +that is used to form the text in various listings. Each string +in this list, if found as the leading text of the brief description, will be +stripped from the text and the result after processing the whole list, is +used as the annotated text. Otherwise, the brief description is used as-is. +If left blank, the following values are used ("$name" is automatically +replaced with the name of the entity): "The $name class" "The $name widget" +"The $name file" "is" "provides" "specifies" "contains" +"represents" "a" "an" "the" +'> + <value name='The $name class'/> + <value name='The $name widget'/> + <value name='The $name file'/> + <value name='is'/> + <value name='provides'/> + <value name='specifies'/> + <value name='contains'/> + <value name='represents'/> + <value name='a'/> + <value name='an'/> + <value name='the'/> + </option> + <option type='bool' id='ALWAYS_DETAILED_SEC' docs=' +If the ALWAYS_DETAILED_SEC and REPEAT_BRIEF tags are both set to YES then +Doxygen will generate a detailed section even if there is only a brief +description. +' defval='0'/> + <option type='bool' id='INLINE_INHERITED_MEMB' docs=' +If the INLINE_INHERITED_MEMB tag is set to YES, doxygen will show all +inherited members of a class in the documentation of that class as if those +members were ordinary class members. Constructors, destructors and assignment +operators of the base classes will not be shown. +' defval='0'/> + <option type='bool' id='FULL_PATH_NAMES' docs=' +If the FULL_PATH_NAMES tag is set to YES then Doxygen will prepend the full +path before files name in the file list and in the header files. If set +to NO the shortest path that makes the file name unique will be used. +' defval='1'/> + <option type='list' id='STRIP_FROM_PATH' format='string' docs=' +If the FULL_PATH_NAMES tag is set to YES then the STRIP_FROM_PATH tag +can be used to strip a user-defined part of the path. Stripping is +only done if one of the specified strings matches the left-hand part of +the path. The tag can be used to show relative paths in the file list. +If left blank the directory from which doxygen is run is used as the +path to strip. +' depends='FULL_PATH_NAMES'> + <value name='/Users/dimitri/doxygen/mail/1.5.7/doxywizard/'/> + </option> + <option type='list' id='STRIP_FROM_INC_PATH' format='string' docs=' +The STRIP_FROM_INC_PATH tag can be used to strip a user-defined part of +the path mentioned in the documentation of a class, which tells +the reader which header file to include in order to use a class. +If left blank only the name of the header file containing the class +definition is used. Otherwise one should specify the include paths that +are normally passed to the compiler using the -I flag. +'> + </option> + <option type='bool' id='SHORT_NAMES' docs=' +If the SHORT_NAMES tag is set to YES, doxygen will generate much shorter +(but less readable) file names. This can be useful is your file systems +doesn't support long names like on DOS, Mac, or CD-ROM. +' defval='0'/> + <option type='bool' id='JAVADOC_AUTOBRIEF' docs=' +If the JAVADOC_AUTOBRIEF tag is set to YES then Doxygen +will interpret the first line (until the first dot) of a JavaDoc-style +comment as the brief description. If set to NO, the JavaDoc +comments will behave just like regular Qt-style comments +(thus requiring an explicit @brief command for a brief description.) +' defval='0'/> + <option type='bool' id='QT_AUTOBRIEF' docs=' +If the QT_AUTOBRIEF tag is set to YES then Doxygen will +interpret the first line (until the first dot) of a Qt-style +comment as the brief description. If set to NO, the comments +will behave just like regular Qt-style comments (thus requiring +an explicit \brief command for a brief description.) +' defval='0'/> + <option type='bool' id='MULTILINE_CPP_IS_BRIEF' docs=' +The MULTILINE_CPP_IS_BRIEF tag can be set to YES to make Doxygen +treat a multi-line C++ special comment block (i.e. a block of //! or /// +comments) as a brief description. This used to be the default behaviour. +The new default is to treat a multi-line C++ comment block as a detailed +description. Set this tag to YES if you prefer the old behaviour instead. +' defval='0'/> + <option type='bool' id='INHERIT_DOCS' docs=' +If the INHERIT_DOCS tag is set to YES (the default) then an undocumented +member inherits the documentation from any documented member that it +re-implements. +' defval='1'/> + <option type='bool' id='SEPARATE_MEMBER_PAGES' docs=' +If the SEPARATE_MEMBER_PAGES tag is set to YES, then doxygen will produce +a new page for each member. If set to NO, the documentation of a member will +be part of the file/class/namespace that contains it. +' defval='0'/> + <option type='int' id='TAB_SIZE' docs=' +The TAB_SIZE tag can be used to set the number of spaces in a tab. +Doxygen uses this value to replace tabs by spaces in code fragments. +' minval='1' maxval='16' defval='8'/> + <option type='list' id='ALIASES' format='string' docs=' +This tag can be used to specify a number of aliases that acts +as commands in the documentation. An alias has the form "name=value". +For example adding "sideeffect=\par Side Effects:\n" will allow you to +put the command \sideeffect (or @sideeffect) in the documentation, which +will result in a user-defined paragraph with heading "Side Effects:". +You can put \n's in the value part of an alias to insert newlines. +'> + </option> + <option type='bool' id='OPTIMIZE_OUTPUT_FOR_C' docs=' +Set the OPTIMIZE_OUTPUT_FOR_C tag to YES if your project consists of C +sources only. Doxygen will then generate output that is more tailored for C. +For instance, some of the names that are used will be different. The list +of all members will be omitted, etc. +' defval='0'/> + <option type='bool' id='OPTIMIZE_OUTPUT_JAVA' docs=' +Set the OPTIMIZE_OUTPUT_JAVA tag to YES if your project consists of Java +sources only. Doxygen will then generate output that is more tailored for +Java. For instance, namespaces will be presented as packages, qualified +scopes will look different, etc. +' defval='0'/> + <option type='bool' id='OPTIMIZE_FOR_FORTRAN' docs=' +Set the OPTIMIZE_FOR_FORTRAN tag to YES if your project consists of Fortran +sources only. Doxygen will then generate output that is more tailored for +Fortran. +' defval='0'/> + <option type='bool' id='OPTIMIZE_OUTPUT_VHDL' docs=' +Set the OPTIMIZE_OUTPUT_VHDL tag to YES if your project consists of VHDL +sources. Doxygen will then generate output that is tailored for +VHDL. +' defval='0'/> + <option type='list' id='EXTENSION_MAPPING' format='string' docs=' +Doxygen selects the parser to use depending on the extension of the files it parses. +With this tag you can assign which parser to use for a given extension. +Doxygen has a built-in mapping, but you can override or extend it using this tag. +The format is ext=language, where ext is a file extension, and language is one of +the parsers supported by doxygen: IDL, Java, Javascript, C#, C, C++, D, PHP, +Objective-C, Python, Fortran, VHDL, C, C++. For instance to make doxygen treat +.inc files as Fortran files (default is PHP), and .f files as C (default is Fortran), +use: inc=Fortran f=C +'> + </option> + <option type='bool' id='BUILTIN_STL_SUPPORT' docs=' +If you use STL classes (i.e. std::string, std::vector, etc.) but do not want +to include (a tag file for) the STL sources as input, then you should +set this tag to YES in order to let doxygen match functions declarations and +definitions whose arguments contain STL classes (e.g. func(std::string); v.s. +func(std::string) {}). This also make the inheritance and collaboration +diagrams that involve STL classes more complete and accurate. +' defval='0'/> + <option type='bool' id='CPP_CLI_SUPPORT' docs=' +If you use Microsoft's C++/CLI language, you should set this option to YES to +enable parsing support. +' defval='0'/> + <option type='bool' id='SIP_SUPPORT' docs=' +Set the SIP_SUPPORT tag to YES if your project consists of sip sources only. +Doxygen will parse them like normal C++ but will assume all classes use public +instead of private inheritance when no explicit protection keyword is present. +' defval='0'/> + <option type='bool' id='IDL_PROPERTY_SUPPORT' docs=' +For Microsoft's IDL there are propget and propput attributes to indicate getter +and setter methods for a property. Setting this option to YES (the default) +will make doxygen to replace the get and set methods by a property in the +documentation. This will only work if the methods are indeed getting or +setting a simple type. If this is not the case, or you want to show the +methods anyway, you should set this option to NO. +' defval='1'/> + <option type='bool' id='DISTRIBUTE_GROUP_DOC' docs=' +If member grouping is used in the documentation and the DISTRIBUTE_GROUP_DOC +tag is set to YES, then doxygen will reuse the documentation of the first +member in the group (if any) for the other members of the group. By default +all members of a group must be documented explicitly. +' defval='0'/> + <option type='bool' id='SUBGROUPING' docs=' +Set the SUBGROUPING tag to YES (the default) to allow class member groups of +the same type (for instance a group of public functions) to be put as a +subgroup of that type (e.g. under the Public Functions section). Set it to +NO to prevent subgrouping. Alternatively, this can be done per class using +the \nosubgrouping command. +' defval='1'/> + <option type='bool' id='TYPEDEF_HIDES_STRUCT' docs=' +When TYPEDEF_HIDES_STRUCT is enabled, a typedef of a struct, union, or enum +is documented as struct, union, or enum with the name of the typedef. So +typedef struct TypeS {} TypeT, will appear in the documentation as a struct +with name TypeT. When disabled the typedef will appear as a member of a file, +namespace, or class. And the struct will be named TypeS. This can typically +be useful for C code in case the coding convention dictates that all compound +types are typedef'ed and only the typedef is referenced, never the tag name. +' defval='0'/> + <option type='int' id='SYMBOL_CACHE_SIZE' docs=' +The SYMBOL_CACHE_SIZE determines the size of the internal cache use to +determine which symbols to keep in memory and which to flush to disk. +When the cache is full, less often used symbols will be written to disk. +For small to medium size projects (<1000 input files) the default value is +probably good enough. For larger projects a too small cache size can cause +doxygen to be busy swapping symbols to and from disk most of the time +causing a significant performance penality. +If the system has enough physical memory increasing the cache will improve the +performance by keeping more symbols in memory. Note that the value works on +a logarithmic scale so increasing the size by one will rougly double the +memory usage. The cache size is given by this formula: +2^(16+SYMBOL_CACHE_SIZE). The valid range is 0..9, the default is 0, +corresponding to a cache size of 2^16 = 65536 symbols +' minval='0' maxval='9' defval='0'/> + </group> + <group name='Build' docs='Build related configuration options'> + <option type='bool' id='EXTRACT_ALL' docs=' +If the EXTRACT_ALL tag is set to YES doxygen will assume all entities in +documentation are documented, even if no documentation was available. +Private class members and static file members will be hidden unless +the EXTRACT_PRIVATE and EXTRACT_STATIC tags are set to YES +' defval='0'/> + <option type='bool' id='EXTRACT_PRIVATE' docs=' +If the EXTRACT_PRIVATE tag is set to YES all private members of a class +will be included in the documentation. +' defval='0'/> + <option type='bool' id='EXTRACT_STATIC' docs=' +If the EXTRACT_STATIC tag is set to YES all static members of a file +will be included in the documentation. +' defval='0'/> + <option type='bool' id='EXTRACT_LOCAL_CLASSES' docs=' +If the EXTRACT_LOCAL_CLASSES tag is set to YES classes (and structs) +defined locally in source files will be included in the documentation. +If set to NO only classes defined in header files are included. +' defval='1'/> + <option type='bool' id='EXTRACT_LOCAL_METHODS' docs=' +This flag is only useful for Objective-C code. When set to YES local +methods, which are defined in the implementation section but not in +the interface are included in the documentation. +If set to NO (the default) only methods in the interface are included. +' defval='0'/> + <option type='bool' id='EXTRACT_ANON_NSPACES' docs=' +If this flag is set to YES, the members of anonymous namespaces will be +extracted and appear in the documentation as a namespace called +'anonymous_namespace{file}', where file will be replaced with the base +name of the file that contains the anonymous namespace. By default +anonymous namespace are hidden. +' defval='0'/> + <option type='bool' id='HIDE_UNDOC_MEMBERS' docs=' +If the HIDE_UNDOC_MEMBERS tag is set to YES, Doxygen will hide all +undocumented members of documented classes, files or namespaces. +If set to NO (the default) these members will be included in the +various overviews, but no documentation section is generated. +This option has no effect if EXTRACT_ALL is enabled. +' defval='0'/> + <option type='bool' id='HIDE_UNDOC_CLASSES' docs=' +If the HIDE_UNDOC_CLASSES tag is set to YES, Doxygen will hide all +undocumented classes that are normally visible in the class hierarchy. +If set to NO (the default) these classes will be included in the various +overviews. This option has no effect if EXTRACT_ALL is enabled. +' defval='0'/> + <option type='bool' id='HIDE_FRIEND_COMPOUNDS' docs=' +If the HIDE_FRIEND_COMPOUNDS tag is set to YES, Doxygen will hide all +friend (class|struct|union) declarations. +If set to NO (the default) these declarations will be included in the +documentation. +' defval='0'/> + <option type='bool' id='HIDE_IN_BODY_DOCS' docs=' +If the HIDE_IN_BODY_DOCS tag is set to YES, Doxygen will hide any +documentation blocks found inside the body of a function. +If set to NO (the default) these blocks will be appended to the +function's detailed documentation block. +' defval='0'/> + <option type='bool' id='INTERNAL_DOCS' docs=' +The INTERNAL_DOCS tag determines if documentation +that is typed after a \internal command is included. If the tag is set +to NO (the default) then the documentation will be excluded. +Set it to YES to include the internal documentation. +' defval='0'/> + <option type='bool' id='CASE_SENSE_NAMES' docs=' +If the CASE_SENSE_NAMES tag is set to NO then Doxygen will only generate +file names in lower-case letters. If set to YES upper-case letters are also +allowed. This is useful if you have classes or files whose names only differ +in case and if your file system supports case sensitive file names. Windows +and Mac users are advised to set this option to NO. +' defval='0' altdefval='portable_fileSystemIsCaseSensitive()'/> + <option type='bool' id='HIDE_SCOPE_NAMES' docs=' +If the HIDE_SCOPE_NAMES tag is set to NO (the default) then Doxygen +will show members with their full class and namespace scopes in the +documentation. If set to YES the scope will be hidden. +' defval='0'/> + <option type='bool' id='SHOW_INCLUDE_FILES' docs=' +If the SHOW_INCLUDE_FILES tag is set to YES (the default) then Doxygen +will put a list of the files that are included by a file in the documentation +of that file. +' defval='1'/> + <option type='bool' id='INLINE_INFO' docs=' +If the INLINE_INFO tag is set to YES (the default) then a tag [inline] +is inserted in the documentation for inline members. +' defval='1'/> + <option type='bool' id='SORT_MEMBER_DOCS' docs=' +If the SORT_MEMBER_DOCS tag is set to YES (the default) then doxygen +will sort the (detailed) documentation of file and class members +alphabetically by member name. If set to NO the members will appear in +declaration order. +' defval='1'/> + <option type='bool' id='SORT_BRIEF_DOCS' docs=' +If the SORT_BRIEF_DOCS tag is set to YES then doxygen will sort the +brief documentation of file, namespace and class members alphabetically +by member name. If set to NO (the default) the members will appear in +declaration order. +' defval='0'/> + <option type='bool' id='SORT_GROUP_NAMES' docs=' +If the SORT_GROUP_NAMES tag is set to YES then doxygen will sort the +hierarchy of group names into alphabetical order. If set to NO (the default) +the group names will appear in their defined order. +' defval='0'/> + <option type='bool' id='SORT_BY_SCOPE_NAME' docs=' +If the SORT_BY_SCOPE_NAME tag is set to YES, the class list will be +sorted by fully-qualified names, including namespaces. If set to +NO (the default), the class list will be sorted only by class name, +not including the namespace part. +Note: This option is not very useful if HIDE_SCOPE_NAMES is set to YES. +Note: This option applies only to the class list, not to the +alphabetical list. +' defval='0'/> + <option type='bool' id='GENERATE_TODOLIST' docs=' +The GENERATE_TODOLIST tag can be used to enable (YES) or +disable (NO) the todo list. This list is created by putting \todo +commands in the documentation. +' defval='1'/> + <option type='bool' id='GENERATE_TESTLIST' docs=' +The GENERATE_TESTLIST tag can be used to enable (YES) or +disable (NO) the test list. This list is created by putting \test +commands in the documentation. +' defval='1'/> + <option type='bool' id='GENERATE_BUGLIST' docs=' +The GENERATE_BUGLIST tag can be used to enable (YES) or +disable (NO) the bug list. This list is created by putting \bug +commands in the documentation. +' defval='1'/> + <option type='bool' id='GENERATE_DEPRECATEDLIST' docs=' +The GENERATE_DEPRECATEDLIST tag can be used to enable (YES) or +disable (NO) the deprecated list. This list is created by putting +\deprecated commands in the documentation. +' defval='1'/> + <option type='list' id='ENABLED_SECTIONS' format='string' docs=' +The ENABLED_SECTIONS tag can be used to enable conditional +documentation sections, marked by \if sectionname ... \endif. +'> + </option> + <option type='int' id='MAX_INITIALIZER_LINES' docs=' +The MAX_INITIALIZER_LINES tag determines the maximum number of lines +the initial value of a variable or define consists of for it to appear in +the documentation. If the initializer consists of more lines than specified +here it will be hidden. Use a value of 0 to hide initializers completely. +The appearance of the initializer of individual variables and defines in the +documentation can be controlled using \showinitializer or \hideinitializer +command in the documentation regardless of this setting. +' minval='0' maxval='10000' defval='30'/> + <option type='bool' id='SHOW_USED_FILES' docs=' +Set the SHOW_USED_FILES tag to NO to disable the list of files generated +at the bottom of the documentation of classes and structs. If set to YES the +list will mention the files that were used to generate the documentation. +' defval='1'/> + <option type='bool' id='SHOW_DIRECTORIES' docs=' +If the sources in your project are distributed over multiple directories +then setting the SHOW_DIRECTORIES tag to YES will show the directory hierarchy +in the documentation. The default is NO. +' defval='0'/> + <option type='bool' id='SHOW_FILES' docs=' +Set the SHOW_FILES tag to NO to disable the generation of the Files page. +This will remove the Files entry from the Quick Index and from the +Folder Tree View (if specified). The default is YES. +' defval='1'/> + <option type='bool' id='SHOW_NAMESPACES' docs=' +Set the SHOW_NAMESPACES tag to NO to disable the generation of the +Namespaces page. This will remove the Namespaces entry from the Quick Index +and from the Folder Tree View (if specified). The default is YES. +' defval='1'/> + <option type='string' id='FILE_VERSION_FILTER' format='file' docs=' +The FILE_VERSION_FILTER tag can be used to specify a program or script that +doxygen should invoke to get the current version for each file (typically from +the version control system). Doxygen will invoke the program by executing (via +popen()) the command <command> <input-file>, where <command> is the value of +the FILE_VERSION_FILTER tag, and <input-file> is the name of an input file +provided by doxygen. Whatever the program writes to standard output +is used as the file version. See the manual for examples. +' defval=''/> + <option type='string' id='LAYOUT_FILE' format='file' docs=' +The LAYOUT_FILE tag can be used to specify a layout file which will be parsed by +doxygen. The layout file controls the global structure of the generated output files +in an output format independent way. The create the layout file that represents +doxygen's defaults, run doxygen with the -l option. You can optionally specify a +file name after the option, if omitted DoxygenLayout.xml will be used as the name +of the layout file. +' defval=''/> + </group> + <group name='Messages' docs='configuration options related to warning and progress messages'> + <option type='bool' id='QUIET' docs=' +The QUIET tag can be used to turn on/off the messages that are generated +by doxygen. Possible values are YES and NO. If left blank NO is used. +' defval='0'/> + <option type='bool' id='WARNINGS' docs=' +The WARNINGS tag can be used to turn on/off the warning messages that are +generated by doxygen. Possible values are YES and NO. If left blank +NO is used. +' defval='1'/> + <option type='bool' id='WARN_IF_UNDOCUMENTED' docs=' +If WARN_IF_UNDOCUMENTED is set to YES, then doxygen will generate warnings +for undocumented members. If EXTRACT_ALL is set to YES then this flag will +automatically be disabled. +' defval='1'/> + <option type='bool' id='WARN_IF_DOC_ERROR' docs=' +If WARN_IF_DOC_ERROR is set to YES, doxygen will generate warnings for +potential errors in the documentation, such as not documenting some +parameters in a documented function, or documenting parameters that +don't exist or using markup commands wrongly. +' defval='1'/> + <option type='bool' id='WARN_NO_PARAMDOC' docs=' +This WARN_NO_PARAMDOC option can be abled to get warnings for +functions that are documented, but have no documentation for their parameters +or return value. If set to NO (the default) doxygen will only warn about +wrong or incomplete parameter documentation, but not about the absence of +documentation. +' defval='0'/> + <option type='string' id='WARN_FORMAT' format='string' docs=' +The WARN_FORMAT tag determines the format of the warning messages that +doxygen can produce. The string should contain the $file, $line, and $text +tags, which will be replaced by the file and line number from which the +warning originated and the warning text. Optionally the format may contain +$version, which will be replaced by the version of the file (if it could +be obtained via FILE_VERSION_FILTER) +' defval='$file:$line: $text'/> + <option type='string' id='WARN_LOGFILE' format='file' docs=' +The WARN_LOGFILE tag can be used to specify a file to which warning +and error messages should be written. If left blank the output is written +to stderr. +' defval=''/> + </group> + <group name='Input' docs='configuration options related to the input files'> + <option type='list' id='INPUT' format='filedir' docs=' +The INPUT tag can be used to specify the files and/or directories that contain +documented source files. You may enter file names like "myfile.cpp" or +directories like "/usr/src/myproject". Separate the files or directories +with spaces. +'> + <value name='/Users/dimitri/doxygen/mail/1.5.7/doxywizard'/> + </option> + <option type='string' id='INPUT_ENCODING' format='string' docs=' +This tag can be used to specify the character encoding of the source files +that doxygen parses. Internally doxygen uses the UTF-8 encoding, which is +also the default input encoding. Doxygen uses libiconv (or the iconv built +into libc) for the transcoding. See http://www.gnu.org/software/libiconv for +the list of possible encodings. +' defval='UTF-8'/> + <option type='list' id='FILE_PATTERNS' format='string' docs=' +If the value of the INPUT tag contains directories, you can use the +FILE_PATTERNS tag to specify one or more wildcard pattern (like *.cpp +and *.h) to filter out the source-files in the directories. If left +blank the following patterns are tested: +*.c *.cc *.cxx *.cpp *.c++ *.java *.ii *.ixx *.ipp *.i++ *.inl *.h *.hh *.hxx +*.hpp *.h++ *.idl *.odl *.cs *.php *.php3 *.inc *.m *.mm *.py *.f90 +'> + <value name='*.c'/> + <value name='*.cc'/> + <value name='*.cxx'/> + <value name='*.cpp'/> + <value name='*.c++'/> + <value name='*.d'/> + <value name='*.java'/> + <value name='*.ii'/> + <value name='*.ixx'/> + <value name='*.ipp'/> + <value name='*.i++'/> + <value name='*.inl'/> + <value name='*.h'/> + <value name='*.hh'/> + <value name='*.hxx'/> + <value name='*.hpp'/> + <value name='*.h++'/> + <value name='*.idl'/> + <value name='*.odl'/> + <value name='*.cs'/> + <value name='*.php'/> + <value name='*.php3'/> + <value name='*.inc'/> + <value name='*.m'/> + <value name='*.mm'/> + <value name='*.dox'/> + <value name='*.py'/> + <value name='*.f90'/> + <value name='*.f'/> + <value name='*.vhd'/> + <value name='*.vhdl'/> + </option> + <option type='bool' id='RECURSIVE' docs=' +The RECURSIVE tag can be used to turn specify whether or not subdirectories +should be searched for input files as well. Possible values are YES and NO. +If left blank NO is used. +' defval='0'/> + <option type='list' id='EXCLUDE' format='filedir' docs=' +The EXCLUDE tag can be used to specify files and/or directories that should +excluded from the INPUT source files. This way you can easily exclude a +subdirectory from a directory tree whose root is specified with the INPUT tag. +'> + </option> + <option type='bool' id='EXCLUDE_SYMLINKS' docs=' +The EXCLUDE_SYMLINKS tag can be used select whether or not files or +directories that are symbolic links (a Unix filesystem feature) are excluded +from the input. +' defval='0'/> + <option type='list' id='EXCLUDE_PATTERNS' format='string' docs=' +If the value of the INPUT tag contains directories, you can use the +EXCLUDE_PATTERNS tag to specify one or more wildcard patterns to exclude +certain files from those directories. Note that the wildcards are matched +against the file with absolute path, so to exclude all test directories +for example use the pattern */test/* +'> + </option> + <option type='list' id='EXCLUDE_SYMBOLS' format='string' docs=' +The EXCLUDE_SYMBOLS tag can be used to specify one or more symbol names +(namespaces, classes, functions, etc.) that should be excluded from the +output. The symbol name can be a fully qualified name, a word, or if the +wildcard * is used, a substring. Examples: ANamespace, AClass, +AClass::ANamespace, ANamespace::*Test +'> + </option> + <option type='list' id='EXAMPLE_PATH' format='dir' docs=' +The EXAMPLE_PATH tag can be used to specify one or more files or +directories that contain example code fragments that are included (see +the \include command). +'> + </option> + <option type='list' id='EXAMPLE_PATTERNS' format='string' docs=' +If the value of the EXAMPLE_PATH tag contains directories, you can use the +EXAMPLE_PATTERNS tag to specify one or more wildcard pattern (like *.cpp +and *.h) to filter out the source-files in the directories. If left +blank all files are included. +'> + <value name='*'/> + </option> + <option type='bool' id='EXAMPLE_RECURSIVE' docs=' +If the EXAMPLE_RECURSIVE tag is set to YES then subdirectories will be +searched for input files to be used with the \include or \dontinclude +commands irrespective of the value of the RECURSIVE tag. +Possible values are YES and NO. If left blank NO is used. +' defval='0'/> + <option type='list' id='IMAGE_PATH' format='dir' docs=' +The IMAGE_PATH tag can be used to specify one or more files or +directories that contain image that are included in the documentation (see +the \image command). +'> + </option> + <option type='string' id='INPUT_FILTER' format='file' docs=' +The INPUT_FILTER tag can be used to specify a program that doxygen should +invoke to filter for each input file. Doxygen will invoke the filter program +by executing (via popen()) the command <filter> <input-file>, where <filter> +is the value of the INPUT_FILTER tag, and <input-file> is the name of an +input file. Doxygen will then use the output that the filter program writes +to standard output. If FILTER_PATTERNS is specified, this tag will be +ignored. +' defval=''/> + <option type='list' id='FILTER_PATTERNS' format='file' docs=' +The FILTER_PATTERNS tag can be used to specify filters on a per file pattern +basis. Doxygen will compare the file name with each pattern and apply the +filter if there is a match. The filters are a list of the form: +pattern=filter (like *.cpp=my_cpp_filter). See INPUT_FILTER for further +info on how filters are used. If FILTER_PATTERNS is empty, INPUT_FILTER +is applied to all files. +'> + </option> + <option type='bool' id='FILTER_SOURCE_FILES' docs=' +If the FILTER_SOURCE_FILES tag is set to YES, the input filter (if set using +INPUT_FILTER) will be used to filter the input files when producing source +files to browse (i.e. when SOURCE_BROWSER is set to YES). +' defval='0'/> + </group> + <group name='Source Browser' docs='configuration options related to source browsing'> + <option type='bool' id='SOURCE_BROWSER' docs=' +If the SOURCE_BROWSER tag is set to YES then a list of source files will +be generated. Documented entities will be cross-referenced with these sources. +Note: To get rid of all source code in the generated output, make sure also +VERBATIM_HEADERS is set to NO. +' defval='0'/> + <option type='bool' id='INLINE_SOURCES' docs=' +Setting the INLINE_SOURCES tag to YES will include the body +of functions and classes directly in the documentation. +' defval='0'/> + <option type='bool' id='STRIP_CODE_COMMENTS' docs=' +Setting the STRIP_CODE_COMMENTS tag to YES (the default) will instruct +doxygen to hide any special comment blocks from generated source code +fragments. Normal C and C++ comments will always remain visible. +' defval='1'/> + <option type='bool' id='REFERENCED_BY_RELATION' docs=' +If the REFERENCED_BY_RELATION tag is set to YES +then for each documented function all documented +functions referencing it will be listed. +' defval='0'/> + <option type='bool' id='REFERENCES_RELATION' docs=' +If the REFERENCES_RELATION tag is set to YES +then for each documented function all documented entities +called/used by that function will be listed. +' defval='0'/> + <option type='bool' id='REFERENCES_LINK_SOURCE' docs=' +If the REFERENCES_LINK_SOURCE tag is set to YES (the default) +and SOURCE_BROWSER tag is set to YES, then the hyperlinks from +functions in REFERENCES_RELATION and REFERENCED_BY_RELATION lists will +link to the source code. Otherwise they will link to the documentation. +' defval='1'/> + <option type='bool' id='USE_HTAGS' docs=' +If the USE_HTAGS tag is set to YES then the references to source code +will point to the HTML generated by the htags(1) tool instead of doxygen +built-in source browser. The htags tool is part of GNU's global source +tagging system (see http://www.gnu.org/software/global/global.html). You +will need version 4.8.6 or higher. +' defval='0' depends='SOURCE_BROWSER'/> + <option type='bool' id='VERBATIM_HEADERS' docs=' +If the VERBATIM_HEADERS tag is set to YES (the default) then Doxygen +will generate a verbatim copy of the header file for each class for +which an include is specified. Set to NO to disable this. +' defval='1'/> + </group> + <group name='Index' docs='configuration options related to the alphabetical class index'> + <option type='bool' id='ALPHABETICAL_INDEX' docs=' +If the ALPHABETICAL_INDEX tag is set to YES, an alphabetical index +of all compounds will be generated. Enable this if the project +contains a lot of classes, structs, unions or interfaces. +' defval='0'/> + <option type='int' id='COLS_IN_ALPHA_INDEX' docs=' +If the alphabetical index is enabled (see ALPHABETICAL_INDEX) then +the COLS_IN_ALPHA_INDEX tag can be used to specify the number of columns +in which this list will be split (can be a number in the range [1..20]) +' minval='1' maxval='20' defval='5'/> + <option type='list' id='IGNORE_PREFIX' format='string' docs=' +In case all classes in a project start with a common prefix, all +classes will be put under the same header in the alphabetical index. +The IGNORE_PREFIX tag can be used to specify one or more prefixes that +should be ignored while generating the index headers. +'> + </option> + </group> + <group name='HTML' docs='configuration options related to the HTML output'> + <option type='bool' id='GENERATE_HTML' docs=' +If the GENERATE_HTML tag is set to YES (the default) Doxygen will +generate HTML output. +' defval='1'/> + <option type='string' id='HTML_OUTPUT' format='dir' docs=' +The HTML_OUTPUT tag is used to specify where the HTML docs will be put. +If a relative path is entered the value of OUTPUT_DIRECTORY will be +put in front of it. If left blank `html' will be used as the default path. +' defval='html' depends='GENERATE_HTML'/> + <option type='string' id='HTML_FILE_EXTENSION' format='string' docs=' +The HTML_FILE_EXTENSION tag can be used to specify the file extension for +each generated HTML page (for example: .htm,.php,.asp). If it is left blank +doxygen will generate files with .html extension. +' defval='.html' depends='GENERATE_HTML'/> + <option type='string' id='HTML_HEADER' format='file' docs=' +The HTML_HEADER tag can be used to specify a personal HTML header for +each generated HTML page. If it is left blank doxygen will generate a +standard header. +' defval='' depends='GENERATE_HTML'/> + <option type='string' id='HTML_FOOTER' format='file' docs=' +The HTML_FOOTER tag can be used to specify a personal HTML footer for +each generated HTML page. If it is left blank doxygen will generate a +standard footer. +' defval='' depends='GENERATE_HTML'/> + <option type='string' id='HTML_STYLESHEET' format='file' docs=' +The HTML_STYLESHEET tag can be used to specify a user-defined cascading +style sheet that is used by each HTML page. It can be used to +fine-tune the look of the HTML output. If the tag is left blank doxygen +will generate a default style sheet. Note that doxygen will try to copy +the style sheet file to the HTML output directory, so don't put your own +stylesheet in the HTML output directory as well, or it will be erased! +' defval='' depends='GENERATE_HTML'/> + <option type='bool' id='HTML_ALIGN_MEMBERS' docs=' +If the HTML_ALIGN_MEMBERS tag is set to YES, the members of classes, +files or namespaces will be aligned in HTML using tables. If set to +NO a bullet list will be used. +' defval='1' depends='GENERATE_HTML'/> + <option type='bool' id='HTML_DYNAMIC_SECTIONS' docs=' +If the HTML_DYNAMIC_SECTIONS tag is set to YES then the generated HTML +documentation will contain sections that can be hidden and shown after the +page has loaded. For this to work a browser that supports +JavaScript and DHTML is required (for instance Mozilla 1.0+, Firefox +Netscape 6.0+, Internet explorer 5.0+, Konqueror, or Safari). +' defval='0' depends='GENERATE_HTML'/> + <option type='bool' id='GENERATE_DOCSET' docs=' +If the GENERATE_DOCSET tag is set to YES, additional index files +will be generated that can be used as input for Apple's Xcode 3 +integrated development environment, introduced with OSX 10.5 (Leopard). +To create a documentation set, doxygen will generate a Makefile in the +HTML output directory. Running make will produce the docset in that +directory and running "make install" will install the docset in +~/Library/Developer/Shared/Documentation/DocSets so that Xcode will find +it at startup. +See http://developer.apple.com/tools/creatingdocsetswithdoxygen.html for more information. +' defval='0' depends='GENERATE_HTML'/> + <option type='string' id='DOCSET_FEEDNAME' format='string' docs=' +When GENERATE_DOCSET tag is set to YES, this tag determines the name of the +feed. A documentation feed provides an umbrella under which multiple +documentation sets from a single provider (such as a company or product suite) +can be grouped. +' defval='Doxygen generated docs' depends='GENERATE_DOCSET'/> + <option type='string' id='DOCSET_BUNDLE_ID' format='string' docs=' +When GENERATE_DOCSET tag is set to YES, this tag specifies a string that +should uniquely identify the documentation set bundle. This should be a +reverse domain-name style string, e.g. com.mycompany.MyDocSet. Doxygen +will append .docset to the name. +' defval='org.doxygen.Project' depends='GENERATE_DOCSET'/> + <option type='bool' id='GENERATE_HTMLHELP' docs=' +If the GENERATE_HTMLHELP tag is set to YES, additional index files +will be generated that can be used as input for tools like the +Microsoft HTML help workshop to generate a compiled HTML help file (.chm) +of the generated HTML documentation. +' defval='0' depends='GENERATE_HTML'/> + <option type='string' id='CHM_FILE' format='file' docs=' +If the GENERATE_HTMLHELP tag is set to YES, the CHM_FILE tag can +be used to specify the file name of the resulting .chm file. You +can add a path in front of the file if the result should not be +written to the html output directory. +' defval='' depends='GENERATE_HTMLHELP'/> + <option type='string' id='HHC_LOCATION' format='file' docs=' +If the GENERATE_HTMLHELP tag is set to YES, the HHC_LOCATION tag can +be used to specify the location (absolute path including file name) of +the HTML help compiler (hhc.exe). If non-empty doxygen will try to run +the HTML help compiler on the generated index.hhp. +' defval='' depends='GENERATE_HTMLHELP'/> + <option type='bool' id='GENERATE_CHI' docs=' +If the GENERATE_HTMLHELP tag is set to YES, the GENERATE_CHI flag +controls if a separate .chi index file is generated (YES) or that +it should be included in the master .chm file (NO). +' defval='0' depends='GENERATE_HTMLHELP'/> + <option type='string' id='CHM_INDEX_ENCODING' format='string' docs=' +If the GENERATE_HTMLHELP tag is set to YES, the CHM_INDEX_ENCODING +is used to encode HtmlHelp index (hhk), content (hhc) and project file +content. +' defval='' depends='GENERATE_HTMLHELP'/> + <option type='bool' id='BINARY_TOC' docs=' +If the GENERATE_HTMLHELP tag is set to YES, the BINARY_TOC flag +controls whether a binary table of contents is generated (YES) or a +normal table of contents (NO) in the .chm file. +' defval='0' depends='GENERATE_HTMLHELP'/> + <option type='bool' id='TOC_EXPAND' docs=' +The TOC_EXPAND flag can be set to YES to add extra items for group members +to the contents of the HTML help documentation and to the tree view. +' defval='0' depends='GENERATE_HTMLHELP'/> + <option type='bool' id='GENERATE_QHP' docs=' +If the GENERATE_QHP tag is set to YES and both QHP_NAMESPACE and QHP_VIRTUAL_FOLDER +are set, an additional index file will be generated that can be used as input for +Qt's qhelpgenerator to generate a Qt Compressed Help (.qch) of the generated +HTML documentation. +' defval='0' depends='GENERATE_HTML'/> + <option type='string' id='QCH_FILE' format='file' docs=' +If the QHG_LOCATION tag is specified, the QCH_FILE tag can +be used to specify the file name of the resulting .qch file. +The path specified is relative to the HTML output folder. +' defval='' depends='GENERATE_QHP'/> + <option type='string' id='QHP_NAMESPACE' format='string' docs=' +The QHP_NAMESPACE tag specifies the namespace to use when generating +Qt Help Project output. For more information please see +http://doc.trolltech.com/qthelpproject.html#namespace +' defval='' depends='GENERATE_QHP'/> + <option type='string' id='QHP_VIRTUAL_FOLDER' format='string' docs=' +The QHP_VIRTUAL_FOLDER tag specifies the namespace to use when generating +Qt Help Project output. For more information please see +http://doc.trolltech.com/qthelpproject.html#virtual-folders +' defval='doc' depends='GENERATE_QHP'/> + <option type='string' id='QHP_CUST_FILTER_NAME' format='string' docs=' +If QHP_CUST_FILTER_NAME is set, it specifies the name of a custom filter to add. +For more information please see +http://doc.trolltech.com/qthelpproject.html#custom-filters +' defval='' depends='GENERATE_QHP'/> + <option type='string' id='QHP_CUST_FILTER_ATTRS' format='string' docs=' +The QHP_CUST_FILT_ATTRS tag specifies the list of the attributes of the custom filter to add.For more information please see +<a href="http://doc.trolltech.com/qthelpproject.html#custom-filters">Qt Help Project / Custom Filters</a>. +' defval='' depends='GENERATE_QHP'/> + <option type='string' id='QHP_SECT_FILTER_ATTRS' format='string' docs=' +The QHP_SECT_FILTER_ATTRS tag specifies the list of the attributes this project's +filter section matches. +<a href="http://doc.trolltech.com/qthelpproject.html#filter-attributes">Qt Help Project / Filter Attributes</a>. +' defval='' depends='GENERATE_QHP'/> + <option type='string' id='QHG_LOCATION' format='file' docs=' +If the GENERATE_QHP tag is set to YES, the QHG_LOCATION tag can +be used to specify the location of Qt's qhelpgenerator. +If non-empty doxygen will try to run qhelpgenerator on the generated +.qhp file. +' defval='' depends='GENERATE_QHP'/> + <option type='bool' id='DISABLE_INDEX' docs=' +The DISABLE_INDEX tag can be used to turn on/off the condensed index at +top of each HTML page. The value NO (the default) enables the index and +the value YES disables it. +' defval='0' depends='GENERATE_HTML'/> + <option type='int' id='ENUM_VALUES_PER_LINE' docs=' +This tag can be used to set the number of enum values (range [1..20]) +that doxygen will group on one line in the generated HTML documentation. +' minval='1' maxval='20' defval='4' depends='GENERATE_HTML'/> + <option type='enum' id='GENERATE_TREEVIEW' defval='NONE' docs=' +The GENERATE_TREEVIEW tag is used to specify whether a tree-like index +structure should be generated to display hierarchical information. +If the tag value is set to FRAME, a side panel will be generated +containing a tree-like index structure (just like the one that +is generated for HTML Help). For this to work a browser that supports +JavaScript, DHTML, CSS and frames is required (for instance Mozilla 1.0+, +Netscape 6.0+, Internet explorer 5.0+, or Konqueror). Windows users are +probably better off using the HTML help feature. Other possible values +for this tag are: HIERARCHIES, which will generate the Groups, Directories, +and Class Hierarchy pages using a tree view instead of an ordered list; +ALL, which combines the behavior of FRAME and HIERARCHIES; and NONE, which +disables this behavior completely. For backwards compatibility with previous +releases of Doxygen, the values YES and NO are equivalent to FRAME and NONE +respectively. +' depends='GENERATE_HTML'> + <value name='NONE'/> + <value name='FRAME'/> + <value name='HIERARCHIES'/> + <value name='ALL'/> + </option> + <option type='int' id='TREEVIEW_WIDTH' docs=' +If the treeview is enabled (see GENERATE_TREEVIEW) then this tag can be +used to set the initial width (in pixels) of the frame in which the tree +is shown. +' minval='0' maxval='1500' defval='250' depends='GENERATE_HTML'/> + <option type='int' id='FORMULA_FONTSIZE' docs=' +Use this tag to change the font size of Latex formulas included +as images in the HTML documentation. The default is 10. Note that +when you change the font size after a successful doxygen run you need +to manually remove any form_*.png images from the HTML output directory +to force them to be regenerated. +' minval='8' maxval='50' defval='10' depends='GENERATE_HTML'/> + </group> + <group name='LaTeX' docs='configuration options related to the LaTeX output'> + <option type='bool' id='GENERATE_LATEX' docs=' +If the GENERATE_LATEX tag is set to YES (the default) Doxygen will +generate Latex output. +' defval='1'/> + <option type='string' id='LATEX_OUTPUT' format='dir' docs=' +The LATEX_OUTPUT tag is used to specify where the LaTeX docs will be put. +If a relative path is entered the value of OUTPUT_DIRECTORY will be +put in front of it. If left blank `latex' will be used as the default path. +' defval='latex' depends='GENERATE_LATEX'/> + <option type='string' id='LATEX_CMD_NAME' format='file' docs=' +The LATEX_CMD_NAME tag can be used to specify the LaTeX command name to be +invoked. If left blank `latex' will be used as the default command name. +' defval='latex' depends='GENERATE_LATEX'/> + <option type='string' id='MAKEINDEX_CMD_NAME' format='file' docs=' +The MAKEINDEX_CMD_NAME tag can be used to specify the command name to +generate index for LaTeX. If left blank `makeindex' will be used as the +default command name. +' defval='makeindex' depends='GENERATE_LATEX'/> + <option type='bool' id='COMPACT_LATEX' docs=' +If the COMPACT_LATEX tag is set to YES Doxygen generates more compact +LaTeX documents. This may be useful for small projects and may help to +save some trees in general. +' defval='0' depends='GENERATE_LATEX'/> + <option type='enum' id='PAPER_TYPE' defval='a4wide' docs=' +The PAPER_TYPE tag can be used to set the paper type that is used +by the printer. Possible values are: a4, a4wide, letter, legal and +executive. If left blank a4wide will be used. +' depends='GENERATE_LATEX'> + <value name='a4'/> + <value name='a4wide'/> + <value name='letter'/> + <value name='legal'/> + <value name='executive'/> + </option> + <option type='list' id='EXTRA_PACKAGES' format='string' docs=' +The EXTRA_PACKAGES tag can be to specify one or more names of LaTeX +packages that should be included in the LaTeX output. +' depends='GENERATE_LATEX'> + </option> + <option type='string' id='LATEX_HEADER' format='file' docs=' +The LATEX_HEADER tag can be used to specify a personal LaTeX header for +the generated latex document. The header should contain everything until +the first chapter. If it is left blank doxygen will generate a +standard header. Notice: only use this tag if you know what you are doing! +' defval='' depends='GENERATE_LATEX'/> + <option type='bool' id='PDF_HYPERLINKS' docs=' +If the PDF_HYPERLINKS tag is set to YES, the LaTeX that is generated +is prepared for conversion to pdf (using ps2pdf). The pdf file will +contain links (just like the HTML output) instead of page references +This makes the output suitable for online browsing using a pdf viewer. +' defval='1' depends='GENERATE_LATEX'/> + <option type='bool' id='USE_PDFLATEX' docs=' +If the USE_PDFLATEX tag is set to YES, pdflatex will be used instead of +plain latex in the generated Makefile. Set this option to YES to get a +higher quality PDF documentation. +' defval='1' depends='GENERATE_LATEX'/> + <option type='bool' id='LATEX_BATCHMODE' docs=' +If the LATEX_BATCHMODE tag is set to YES, doxygen will add the \\batchmode. +command to the generated LaTeX files. This will instruct LaTeX to keep +running if errors occur, instead of asking the user for help. +This option is also used when generating formulas in HTML. +' defval='0' depends='GENERATE_LATEX'/> + <option type='bool' id='LATEX_HIDE_INDICES' docs=' +If LATEX_HIDE_INDICES is set to YES then doxygen will not +include the index chapters (such as File Index, Compound Index, etc.) +in the output. +' defval='0' depends='GENERATE_LATEX'/> + </group> + <group name='RTF' docs='configuration options related to the RTF output'> + <option type='bool' id='GENERATE_RTF' docs=' +If the GENERATE_RTF tag is set to YES Doxygen will generate RTF output +The RTF output is optimized for Word 97 and may not look very pretty with +other RTF readers or editors. +' defval='0'/> + <option type='string' id='RTF_OUTPUT' format='dir' docs=' +The RTF_OUTPUT tag is used to specify where the RTF docs will be put. +If a relative path is entered the value of OUTPUT_DIRECTORY will be +put in front of it. If left blank `rtf' will be used as the default path. +' defval='rtf' depends='GENERATE_RTF'/> + <option type='bool' id='COMPACT_RTF' docs=' +If the COMPACT_RTF tag is set to YES Doxygen generates more compact +RTF documents. This may be useful for small projects and may help to +save some trees in general. +' defval='0' depends='GENERATE_RTF'/> + <option type='bool' id='RTF_HYPERLINKS' docs=' +If the RTF_HYPERLINKS tag is set to YES, the RTF that is generated +will contain hyperlink fields. The RTF file will +contain links (just like the HTML output) instead of page references. +This makes the output suitable for online browsing using WORD or other +programs which support those fields. +Note: wordpad (write) and others do not support links. +' defval='0' depends='GENERATE_RTF'/> + <option type='string' id='RTF_STYLESHEET_FILE' format='file' docs=' +Load stylesheet definitions from file. Syntax is similar to doxygen's +config file, i.e. a series of assignments. You only have to provide +replacements, missing definitions are set to their default value. +' defval='' depends='GENERATE_RTF'/> + <option type='string' id='RTF_EXTENSIONS_FILE' format='file' docs=' +Set optional variables used in the generation of an rtf document. +Syntax is similar to doxygen's config file. +' defval='' depends='GENERATE_RTF'/> + </group> + <group name='Man' docs='configuration options related to the man page output'> + <option type='bool' id='GENERATE_MAN' docs=' +If the GENERATE_MAN tag is set to YES (the default) Doxygen will +generate man pages +' defval='0'/> + <option type='string' id='MAN_OUTPUT' format='dir' docs=' +The MAN_OUTPUT tag is used to specify where the man pages will be put. +If a relative path is entered the value of OUTPUT_DIRECTORY will be +put in front of it. If left blank `man' will be used as the default path. +' defval='man' depends='GENERATE_MAN'/> + <option type='string' id='MAN_EXTENSION' format='string' docs=' +The MAN_EXTENSION tag determines the extension that is added to +the generated man pages (default is the subroutine's section .3) +' defval='.3' depends='GENERATE_MAN'/> + <option type='bool' id='MAN_LINKS' docs=' +If the MAN_LINKS tag is set to YES and Doxygen generates man output, +then it will generate one additional man file for each entity +documented in the real man page(s). These additional files +only source the real man page, but without them the man command +would be unable to find the correct page. The default is NO. +' defval='0' depends='GENERATE_MAN'/> + </group> + <group name='XML' docs='configuration options related to the XML output'> + <option type='bool' id='GENERATE_XML' docs=' +If the GENERATE_XML tag is set to YES Doxygen will +generate an XML file that captures the structure of +the code including all documentation. +' defval='0'/> + <option type='string' id='XML_OUTPUT' format='dir' docs=' +The XML_OUTPUT tag is used to specify where the XML pages will be put. +If a relative path is entered the value of OUTPUT_DIRECTORY will be +put in front of it. If left blank `xml' will be used as the default path. +' defval='xml' depends='GENERATE_XML'/> + <option type='string' id='XML_SCHEMA' format='string' docs=' +The XML_SCHEMA tag can be used to specify an XML schema, +which can be used by a validating XML parser to check the +syntax of the XML files. +' defval='' depends='GENERATE_XML'/> + <option type='string' id='XML_DTD' format='string' docs=' +The XML_DTD tag can be used to specify an XML DTD, +which can be used by a validating XML parser to check the +syntax of the XML files. +' defval='' depends='GENERATE_XML'/> + <option type='bool' id='XML_PROGRAMLISTING' docs=' +If the XML_PROGRAMLISTING tag is set to YES Doxygen will +dump the program listings (including syntax highlighting +and cross-referencing information) to the XML output. Note that +enabling this will significantly increase the size of the XML output. +' defval='1' depends='GENERATE_XML'/> + </group> + <group name='DEF' docs='configuration options for the AutoGen Definitions output'> + <option type='bool' id='GENERATE_AUTOGEN_DEF' docs=' +If the GENERATE_AUTOGEN_DEF tag is set to YES Doxygen will +generate an AutoGen Definitions (see autogen.sf.net) file +that captures the structure of the code including all +documentation. Note that this feature is still experimental +and incomplete at the moment. +' defval='0'/> + </group> + <group name='PerlMod' docs='configuration options related to the Perl module output'> + <option type='bool' id='GENERATE_PERLMOD' docs=' +If the GENERATE_PERLMOD tag is set to YES Doxygen will +generate a Perl module file that captures the structure of +the code including all documentation. Note that this +feature is still experimental and incomplete at the +moment. +' defval='0'/> + <option type='bool' id='PERLMOD_LATEX' docs=' +If the PERLMOD_LATEX tag is set to YES Doxygen will generate +the necessary Makefile rules, Perl scripts and LaTeX code to be able +to generate PDF and DVI output from the Perl module output. +' defval='0' depends='GENERATE_PERLMOD'/> + <option type='bool' id='PERLMOD_PRETTY' docs=' +If the PERLMOD_PRETTY tag is set to YES the Perl module output will be +nicely formatted so it can be parsed by a human reader. This is useful +if you want to understand what is going on. On the other hand, if this +tag is set to NO the size of the Perl module output will be much smaller +and Perl will parse it just the same. +' defval='1' depends='GENERATE_PERLMOD'/> + <option type='string' id='PERLMOD_MAKEVAR_PREFIX' format='string' docs=' +The names of the make variables in the generated doxyrules.make file +are prefixed with the string contained in PERLMOD_MAKEVAR_PREFIX. +This is useful so different doxyrules.make files included by the same +Makefile don't overwrite each other's variables.' defval='' depends='GENERATE_PERLMOD'/> + </group> + <group name='Preprocessor' docs='Configuration options related to the preprocessor '> + <option type='bool' id='ENABLE_PREPROCESSING' docs=' +If the ENABLE_PREPROCESSING tag is set to YES (the default) Doxygen will +evaluate all C-preprocessor directives found in the sources and include +files. +' defval='1'/> + <option type='bool' id='MACRO_EXPANSION' docs=' +If the MACRO_EXPANSION tag is set to YES Doxygen will expand all macro +names in the source code. If set to NO (the default) only conditional +compilation will be performed. Macro expansion can be done in a controlled +way by setting EXPAND_ONLY_PREDEF to YES. +' defval='0' depends='ENABLE_PREPROCESSING'/> + <option type='bool' id='EXPAND_ONLY_PREDEF' docs=' +If the EXPAND_ONLY_PREDEF and MACRO_EXPANSION tags are both set to YES +then the macro expansion is limited to the macros specified with the +PREDEFINED and EXPAND_AS_DEFINED tags. +' defval='0' depends='ENABLE_PREPROCESSING'/> + <option type='bool' id='SEARCH_INCLUDES' docs=' +If the SEARCH_INCLUDES tag is set to YES (the default) the includes files +in the INCLUDE_PATH (see below) will be search if a #include is found. +' defval='1' depends='ENABLE_PREPROCESSING'/> + <option type='list' id='INCLUDE_PATH' format='dir' docs=' +The INCLUDE_PATH tag can be used to specify one or more directories that +contain include files that are not input files but should be processed by +the preprocessor. +' depends='ENABLE_PREPROCESSING'> + </option> + <option type='list' id='INCLUDE_FILE_PATTERNS' format='string' docs=' +You can use the INCLUDE_FILE_PATTERNS tag to specify one or more wildcard +patterns (like *.h and *.hpp) to filter out the header-files in the +directories. If left blank, the patterns specified with FILE_PATTERNS will +be used. +' depends='ENABLE_PREPROCESSING'> + </option> + <option type='list' id='PREDEFINED' format='string' docs=' +The PREDEFINED tag can be used to specify one or more macro names that +are defined before the preprocessor is started (similar to the -D option of +gcc). The argument of the tag is a list of macros of the form: name +or name=definition (no spaces). If the definition and the = are +omitted =1 is assumed. To prevent a macro definition from being +undefined via #undef or recursively expanded use the := operator +instead of the = operator. +' depends='ENABLE_PREPROCESSING'> + </option> + <option type='list' id='EXPAND_AS_DEFINED' format='string' docs=' +If the MACRO_EXPANSION and EXPAND_ONLY_PREDEF tags are set to YES then +this tag can be used to specify a list of macro names that should be expanded. +The macro definition that is found in the sources will be used. +Use the PREDEFINED tag if you want to use a different macro definition. +' depends='ENABLE_PREPROCESSING'> + </option> + <option type='bool' id='SKIP_FUNCTION_MACROS' docs=' +If the SKIP_FUNCTION_MACROS tag is set to YES (the default) then +doxygen's preprocessor will remove all function-like macros that are alone +on a line, have an all uppercase name, and do not end with a semicolon. Such +function macros are typically used for boiler-plate code, and will confuse +the parser if not removed. +' defval='1' depends='ENABLE_PREPROCESSING'/> + </group> + <group name='External' docs='Configuration::additions related to external references '> + <option type='list' id='TAGFILES' format='file' docs=' +The TAGFILES option can be used to specify one or more tagfiles. +Optionally an initial location of the external documentation +can be added for each tagfile. The format of a tag file without +this location is as follows: + TAGFILES = file1 file2 ... +Adding location for the tag files is done as follows: + TAGFILES = file1=loc1 "file2 = loc2" ... +where "loc1" and "loc2" can be relative or absolute paths or +URLs. If a location is present for each tag, the installdox tool +does not have to be run to correct the links. +Note that each tag file must have a unique name +(where the name does NOT include the path) +If a tag file is not located in the directory in which doxygen +is run, you must also specify the path to the tagfile here. +'> + </option> + <option type='string' id='GENERATE_TAGFILE' format='file' docs=' +When a file name is specified after GENERATE_TAGFILE, doxygen will create +a tag file that is based on the input files it reads. +' defval=''/> + <option type='bool' id='ALLEXTERNALS' docs=' +If the ALLEXTERNALS tag is set to YES all external classes will be listed +in the class index. If set to NO only the inherited external classes +will be listed. +' defval='0'/> + <option type='bool' id='EXTERNAL_GROUPS' docs=' +If the EXTERNAL_GROUPS tag is set to YES all external groups will be listed +in the modules index. If set to NO, only the current project's groups will +be listed. +' defval='1'/> + <option type='string' id='PERL_PATH' format='dir' docs=' +The PERL_PATH should be the absolute path and name of the perl script +interpreter (i.e. the result of `which perl'). +' defval='/usr/bin/perl'/> + </group> + <group name='Dot' docs='Configuration options related to the dot tool '> + <option type='bool' id='CLASS_DIAGRAMS' docs=' +If the CLASS_DIAGRAMS tag is set to YES (the default) Doxygen will +generate a inheritance diagram (in HTML, RTF and LaTeX) for classes with base +or super classes. Setting the tag to NO turns the diagrams off. Note that +this option is superseded by the HAVE_DOT option below. This is only a +fallback. It is recommended to install and use dot, since it yields more +powerful graphs. +' defval='1'/> + <option type='string' id='MSCGEN_PATH' format='string' docs=' +You can define message sequence charts within doxygen comments using the \msc +command. Doxygen will then run the mscgen tool (see +http://www.mcternan.me.uk/mscgen/) to produce the chart and insert it in the +documentation. The MSCGEN_PATH tag allows you to specify the directory where +the mscgen tool resides. If left empty the tool is assumed to be found in the +default search path. +' defval=''/> + <option type='bool' id='HIDE_UNDOC_RELATIONS' docs=' +If set to YES, the inheritance and collaboration graphs will hide +inheritance and usage relations if the target is undocumented +or is not a class. +' defval='1'/> + <option type='bool' id='HAVE_DOT' docs=' +If you set the HAVE_DOT tag to YES then doxygen will assume the dot tool is +available from the path. This tool is part of Graphviz, a graph visualization +toolkit from AT&T and Lucent Bell Labs. The other options in this section +have no effect if this option is set to NO (the default) +' defval='0'/> + <option type='string' id='DOT_FONTNAME' format='string' docs=' +By default doxygen will write a font called FreeSans.ttf to the output +directory and reference it in all dot files that doxygen generates. This +font does not include all possible unicode characters however, so when you need +these (or just want a differently looking font) you can specify the font name +using DOT_FONTNAME. You need need to make sure dot is able to find the font, +which can be done by putting it in a standard location or by setting the +DOTFONTPATH environment variable or by setting DOT_FONTPATH to the directory +containing the font. +' defval='FreeSans' depends='HAVE_DOT'/> + <option type='int' id='DOT_FONTSIZE' docs=' +The DOT_FONTSIZE tag can be used to set the size of the font of dot graphs. +The default size is 10pt. +' minval='4' maxval='24' defval='10' depends='HAVE_DOT'/> + <option type='string' id='DOT_FONTPATH' format='string' docs=' +By default doxygen will tell dot to use the output directory to look for the +FreeSans.ttf font (which doxygen will put there itself). If you specify a +different font using DOT_FONTNAME you can set the path where dot +can find it using this tag. +' defval='' depends='HAVE_DOT'/> + <option type='bool' id='CLASS_GRAPH' docs=' +If the CLASS_GRAPH and HAVE_DOT tags are set to YES then doxygen +will generate a graph for each documented class showing the direct and +indirect inheritance relations. Setting this tag to YES will force the +the CLASS_DIAGRAMS tag to NO. +' defval='1' depends='HAVE_DOT'/> + <option type='bool' id='COLLABORATION_GRAPH' docs=' +If the COLLABORATION_GRAPH and HAVE_DOT tags are set to YES then doxygen +will generate a graph for each documented class showing the direct and +indirect implementation dependencies (inheritance, containment, and +class references variables) of the class with other documented classes. +' defval='1' depends='HAVE_DOT'/> + <option type='bool' id='GROUP_GRAPHS' docs=' +If the GROUP_GRAPHS and HAVE_DOT tags are set to YES then doxygen +will generate a graph for groups, showing the direct groups dependencies +' defval='1' depends='HAVE_DOT'/> + <option type='bool' id='UML_LOOK' docs=' +If the UML_LOOK tag is set to YES doxygen will generate inheritance and +collaboration diagrams in a style similar to the OMG's Unified Modeling +Language. +' defval='0' depends='HAVE_DOT'/> + <option type='bool' id='TEMPLATE_RELATIONS' docs=' +If set to YES, the inheritance and collaboration graphs will show the +relations between templates and their instances. +' defval='0' depends='HAVE_DOT'/> + <option type='bool' id='INCLUDE_GRAPH' docs=' +If the ENABLE_PREPROCESSING, SEARCH_INCLUDES, INCLUDE_GRAPH, and HAVE_DOT +tags are set to YES then doxygen will generate a graph for each documented +file showing the direct and indirect include dependencies of the file with +other documented files. +' defval='1' depends='HAVE_DOT'/> + <option type='bool' id='INCLUDED_BY_GRAPH' docs=' +If the ENABLE_PREPROCESSING, SEARCH_INCLUDES, INCLUDED_BY_GRAPH, and +HAVE_DOT tags are set to YES then doxygen will generate a graph for each +documented header file showing the documented files that directly or +indirectly include this file. +' defval='1' depends='HAVE_DOT'/> + <option type='bool' id='CALL_GRAPH' docs=' +If the CALL_GRAPH and HAVE_DOT options are set to YES then +doxygen will generate a call dependency graph for every global function +or class method. Note that enabling this option will significantly increase +the time of a run. So in most cases it will be better to enable call graphs +for selected functions only using the \callgraph command. +' defval='0' depends='HAVE_DOT'/> + <option type='bool' id='CALLER_GRAPH' docs=' +If the CALLER_GRAPH and HAVE_DOT tags are set to YES then +doxygen will generate a caller dependency graph for every global function +or class method. Note that enabling this option will significantly increase +the time of a run. So in most cases it will be better to enable caller +graphs for selected functions only using the \callergraph command. +' defval='0' depends='HAVE_DOT'/> + <option type='bool' id='GRAPHICAL_HIERARCHY' docs=' +If the GRAPHICAL_HIERARCHY and HAVE_DOT tags are set to YES then doxygen +will graphical hierarchy of all classes instead of a textual one. +' defval='1' depends='HAVE_DOT'/> + <option type='bool' id='DIRECTORY_GRAPH' docs=' +If the DIRECTORY_GRAPH, SHOW_DIRECTORIES and HAVE_DOT tags are set to YES +then doxygen will show the dependencies a directory has on other directories +in a graphical way. The dependency relations are determined by the #include +relations between the files in the directories. +' defval='1' depends='HAVE_DOT'/> + <option type='enum' id='DOT_IMAGE_FORMAT' defval='png' docs=' +The DOT_IMAGE_FORMAT tag can be used to set the image format of the images +generated by dot. Possible values are png, jpg, or gif +If left blank png will be used. +' depends='HAVE_DOT'> + <value name='png'/> + <value name='jpg'/> + <value name='gif'/> + </option> + <option type='string' id='DOT_PATH' format='dir' docs=' +The tag DOT_PATH can be used to specify the path where the dot tool can be +found. If left blank, it is assumed the dot tool can be found in the path. +' defval='' depends='HAVE_DOT'/> + <option type='list' id='DOTFILE_DIRS' format='dir' docs=' +The DOTFILE_DIRS tag can be used to specify one or more directories that +contain dot files that are included in the documentation (see the +\dotfile command). +' depends='HAVE_DOT'> + </option> + <option type='int' id='DOT_GRAPH_MAX_NODES' docs=' +The DOT_GRAPH_MAX_NODES tag can be used to set the maximum number of +nodes that will be shown in the graph. If the number of nodes in a graph +becomes larger than this value, doxygen will truncate the graph, which is +visualized by representing a node as a red box. Note that doxygen if the +number of direct children of the root node in a graph is already larger than +DOT_GRAPH_MAX_NODES then the graph will not be shown at all. Also note +that the size of a graph can be further restricted by MAX_DOT_GRAPH_DEPTH. +' minval='0' maxval='10000' defval='50' depends='HAVE_DOT'/> + <option type='int' id='MAX_DOT_GRAPH_DEPTH' docs=' +The MAX_DOT_GRAPH_DEPTH tag can be used to set the maximum depth of the +graphs generated by dot. A depth value of 3 means that only nodes reachable +from the root by following a path via at most 3 edges will be shown. Nodes +that lay further from the root node will be omitted. Note that setting this +option to 1 or 2 may greatly reduce the computation time needed for large +code bases. Also note that the size of a graph can be further restricted by +DOT_GRAPH_MAX_NODES. Using a depth of 0 means no depth restriction. +' minval='0' maxval='1000' defval='0' depends='HAVE_DOT'/> + <option type='bool' id='DOT_TRANSPARENT' docs=' +Set the DOT_TRANSPARENT tag to YES to generate images with a transparent +background. This is disabled by default, because dot on Windows does not +seem to support this out of the box. Warning: Depending on the platform used, +enabling this option may lead to badly anti-aliased labels on the edges of +a graph (i.e. they become hard to read). +' defval='0' depends='HAVE_DOT'/> + <option type='bool' id='DOT_MULTI_TARGETS' docs=' +Set the DOT_MULTI_TARGETS tag to YES allow dot to generate multiple output +files in one run (i.e. multiple -o and -T options on the command line). This +makes dot run faster, but since only newer versions of dot (>1.8.10) +support this, this feature is disabled by default. +' defval='0' depends='HAVE_DOT'/> + <option type='bool' id='GENERATE_LEGEND' docs=' +If the GENERATE_LEGEND tag is set to YES (the default) Doxygen will +generate a legend page explaining the meaning of the various boxes and +arrows in the dot generated graphs. +' defval='1' depends='HAVE_DOT'/> + <option type='bool' id='DOT_CLEANUP' docs=' +If the DOT_CLEANUP tag is set to YES (the default) Doxygen will +remove the intermediate dot files that are used to generate +the various graphs. +' defval='1' depends='HAVE_DOT'/> + </group> + <group name='Search' docs='Options related to the search engine'> + <option type='bool' id='SEARCHENGINE' docs=' +The SEARCHENGINE tag specifies whether or not a search engine should be +used. If set to NO the values of all tags below this one will be ignored. +' defval='0'/> + <option type='obsolete' id='USE_WINDOWS_ENCODING'/> + <option type='obsolete' id='DETAILS_AT_TOP'/> + <option type='obsolete' id='QTHELP_FILE'/> + <option type='obsolete' id='QTHELP_CONFIG'/> + <option type='obsolete' id='DOXYGEN2QTHELP_LOC'/> + <option type='obsolete' id='MAX_DOT_GRAPH_WIDTH'/> + <option type='obsolete' id='MAX_DOT_GRAPH_HEIGHT'/> + <option type='obsolete' id='CGI_NAME'/> + <option type='obsolete' id='CGI_URL'/> + <option type='obsolete' id='DOC_URL'/> + <option type='obsolete' id='DOC_ABSPATH'/> + <option type='obsolete' id='BIN_ABSPATH'/> + <option type='obsolete' id='EXT_DOC_PATHS'/> + </group> +</doxygenconfig> |