#include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #if defined(Q_OS_MACX) #include #include #undef check #endif #include "doxywizard.h" #include "expert.h" #include "config.h" #include "version.h" const int messageTimeout = 5000; //!< status bar message timeout in millisec. #if defined(Q_OS_MACX) QCString getResourcePath() { // todo: use qApp->applicationDirPath() QCString result; CFURLRef pluginRef = CFBundleCopyBundleURL(CFBundleGetMainBundle()); CFStringRef macPath = CFURLCopyFileSystemPath(pluginRef, kCFURLPOSIXPathStyle); result = CFStringGetCStringPtr(macPath, CFStringGetSystemEncoding()); result+="/Contents/Resources/"; return result; } void setDotPath() { Config_getString("DOT_PATH")=getResourcePath(); } void setMscgenPath() { Config_getString("MSCGEN_PATH")=getResourcePath(); } #endif //========================================================================== Step1::Step1(QWidget *parent) : QWidget(parent,"Step1") { QVBoxLayout *layout = new QVBoxLayout(this); layout->setMargin(4); layout->setSpacing(8); layout->addWidget(new QLabel( "Provide some information " "about the project you are documenting",this)); QWidget *w = new QWidget( this ); QHBoxLayout *bl = new QHBoxLayout(w,10); QVBox *col1 = new QVBox( w ); col1->setSpacing(8); (new QLabel("Project name:",col1))->setAlignment(Qt::AlignRight|Qt::AlignVCenter); (new QLabel("Project version or id:",col1))->setAlignment(Qt::AlignRight|Qt::AlignVCenter); QVBox *col2 = new QVBox( w ); col2->setSpacing(8); m_projName = new QLineEdit(col2); m_projNumber = new QLineEdit(col2); bl->addWidget(col1); bl->addWidget(col2); layout->addWidget(w); //--------------------------------------------------- QFrame *f = new QFrame( this ); f->setFrameStyle( QFrame::HLine | QFrame::Sunken ); layout->addWidget(f); layout->addWidget(new QLabel( "Specify the directory to " "scan for source code", this)); QHBox *row = new QHBox( this ); row->setSpacing(10); new QLabel("Source code directory:",row); m_sourceDir = new QLineEdit(row); m_srcSelectDir = new QPushButton("Select...",row); layout->addWidget(row); m_recursive = new QCheckBox("Scan recursively",this); m_recursive->setChecked(TRUE); layout->addWidget(m_recursive); //--------------------------------------------------- f = new QFrame( this ); f->setFrameStyle( QFrame::HLine | QFrame::Sunken ); layout->addWidget(f); layout->addWidget(new QLabel( "Specify the directory where doxygen should " "put the generated documentation",this )); row = new QHBox( this ); row->setSpacing(10); new QLabel("Destination directory:",row); m_destDir = new QLineEdit(row); m_dstSelectDir = new QPushButton("Select...",row); layout->addWidget(row); layout->addStretch(1); connect(m_srcSelectDir,SIGNAL(clicked()), this,SLOT(selectSourceDir())); connect(m_dstSelectDir,SIGNAL(clicked()), this,SLOT(selectDestinationDir())); } void Step1::selectSourceDir() { m_sourceDir->setText(QFileDialog::getExistingDirectory(m_sourceDir->text(),this)); } void Step1::selectDestinationDir() { m_destDir->setText(QFileDialog::getExistingDirectory(m_destDir->text(),this)); } QString Step1::getProjectName() const { return m_projName->text(); } QString Step1::getProjectNumber() const { return m_projNumber->text(); } QString Step1::getSourceDir() const { return m_sourceDir->text(); } bool Step1::scanRecursively() const { return m_recursive->isChecked(); } QString Step1::getDestinationDir() const { return m_destDir->text(); } void Step1::setProjectName(const QString &name) { m_projName->setText(name); } void Step1::setProjectNumber(const QString &num) { m_projNumber->setText(num); } void Step1::setSourceDir(const QString &dir) { m_sourceDir->setText(dir); } void Step1::setRecursiveScan(bool enable) { m_recursive->setChecked(enable); } void Step1::setDestinationDir(const QString &dir) { m_destDir->setText(dir); } //========================================================================== Step2::Step2(QWidget *parent) : QWidget(parent,"Step2") { QVBoxLayout *layout = new QVBoxLayout(this); layout->setSpacing(8); m_extractMode = new QButtonGroup("Select the desired extraction mode:",this); QGridLayout *gbox = new QGridLayout( m_extractMode, 4, 1, 8, 0 ); gbox->addRowSpacing( 0, fontMetrics().lineSpacing()+2 ); gbox->addWidget(new QRadioButton("Documented entities only",m_extractMode),1,0); gbox->addWidget(new QRadioButton("All entities",m_extractMode),2,0); gbox->addWidget(m_crossRef = new QCheckBox("Include cross-referenced source code in the output",m_extractMode),3,0); m_extractMode->setButton(0); layout->addWidget(m_extractMode); //--------------------------------------------------- QFrame *f = new QFrame( this ); f->setFrameStyle( QFrame::HLine | QFrame::Sunken ); layout->addWidget(f); m_optimizeLang = new QButtonGroup("Select programming language to optimize the results for",this); gbox = new QGridLayout( m_optimizeLang, 5, 1, 8, 0 ); gbox->addRowSpacing( 0, fontMetrics().lineSpacing()+2 ); gbox->addWidget(new QRadioButton("Optimize for C++ output",m_optimizeLang),1,0); gbox->addWidget(new QRadioButton("Optimize for Java output",m_optimizeLang),2,0); gbox->addWidget(new QRadioButton("Optimize for C output",m_optimizeLang),3,0); gbox->addWidget(new QRadioButton("Optimize for C# output",m_optimizeLang),4,0); m_optimizeLang->setButton(0); layout->addWidget(m_optimizeLang); layout->addStretch(1); connect(m_crossRef,SIGNAL(stateChanged(int)), parent,SLOT(changeCrossRefState(int))); } bool Step2::crossReferencingEnabled() const { //printf("Step2::crossReferencingEnabled()=%d\n",m_crossRef->isOn()); return m_crossRef->isOn(); } void Step2::enableCrossReferencing() { //printf("Step2::enableCrossReferencing()\n"); m_crossRef->setChecked(TRUE); } bool Step2::extractAll() const { //printf("Step2::extractAll()=%d\n",m_extractMode->find(1)->isOn()); return m_extractMode->find(1)->isOn(); } bool Step2::crossReferencing() const { return m_crossRef->isChecked(); } OptLang Step2::optimizeFor() const { switch (m_optimizeLang->selectedId()) { case 0: return Lang_Cpp; case 1: return Lang_Java; case 2: return Lang_C; case 3: return Lang_CS; } return Lang_Cpp; } void Step2::setExtractAll(bool enable) { //printf("Step2::setExtractAll(%d)\n",enable); m_extractMode->setButton(enable?1:0); } void Step2::setCrossReferencing(bool enable) { //printf("Step2::setCrossReferencing(%d)\n",enable); m_crossRef->setChecked(enable); } void Step2::setOptimizeFor(OptLang lang) { switch (lang) { case Lang_Cpp: m_optimizeLang->setButton(0); break; case Lang_Java: m_optimizeLang->setButton(1); break; case Lang_C: m_optimizeLang->setButton(2); break; case Lang_CS: m_optimizeLang->setButton(3); break; } } //========================================================================== Step3::Step3(QWidget *parent) : QWidget(parent,"Step3") { QVBoxLayout *layout = new QVBoxLayout(this); QButtonGroup *bg = new QButtonGroup("Output format(s) to generate",this); QGridLayout *gbox = new QGridLayout( bg, 8, 1, 8, 0 ); gbox->addRowSpacing( 0, fontMetrics().lineSpacing()+2 ); gbox->addWidget(m_htmlEnabled=new QCheckBox("HTML",bg),1,0); QWidget *w = new QWidget(bg); QHBoxLayout *bl = new QHBoxLayout(w); m_htmlOptions = new QButtonGroup(w); m_htmlOptions->hide(); m_htmlOptionBox = new QVBox(w); m_htmlOptions->insert(new QRadioButton("plain HTML",m_htmlOptionBox)); m_htmlOptions->insert(new QRadioButton("with frames and a navigation tree",m_htmlOptionBox)); m_htmlOptions->insert(new QRadioButton("prepare for compressed HTML (.chm)",m_htmlOptionBox)); m_htmlOptions->insert(m_searchEnabled=new QCheckBox("With search function (requires PHP enabled web server)",m_htmlOptionBox)); bl->addSpacing(30); bl->addWidget(m_htmlOptionBox); m_htmlOptions->setButton(0); m_htmlOptionBox->setEnabled(TRUE); gbox->addWidget(w,2,0); gbox->addWidget(m_latexEnabled=new QCheckBox("LaTeX",bg),3,0); w = new QWidget(bg); bl = new QHBoxLayout(w); m_texOptions = new QButtonGroup(w); m_texOptions->hide(); m_texOptionBox = new QVBox(w); m_texOptions->insert(new QRadioButton("as intermediate format for hyperlinked PDF",m_texOptionBox)); m_texOptions->insert(new QRadioButton("as intermediate format for PDF",m_texOptionBox)); m_texOptions->insert(new QRadioButton("as intermediate format for PostScript",m_texOptionBox)); bl->addSpacing(30); bl->addWidget(m_texOptionBox); m_texOptions->setButton(0); m_texOptionBox->setEnabled(FALSE); gbox->addWidget(w,4,0); gbox->addWidget(m_manEnabled=new QCheckBox("Man pages",bg),5,0); gbox->addWidget(m_rtfEnabled=new QCheckBox("Rich Text Format (RTF)",bg),6,0); gbox->addWidget(m_xmlEnabled=new QCheckBox("XML",bg),7,0); bg->setButton(0); layout->addWidget(bg); layout->addStretch(1); connect(m_latexEnabled,SIGNAL(stateChanged(int)), this,SLOT(latexStateChange(int))); connect(m_htmlEnabled,SIGNAL(stateChanged(int)), this,SLOT(htmlStateChange(int))); } void Step3::latexStateChange(int state) { if (state==QButton::On) { m_texOptionBox->setEnabled(TRUE); } else if (state==QButton::Off) { m_texOptionBox->setEnabled(FALSE); } } void Step3::htmlStateChange(int state) { if (state==QButton::On) { m_htmlOptionBox->setEnabled(TRUE); } else if (state==QButton::Off) { m_htmlOptionBox->setEnabled(FALSE); } } bool Step3::htmlEnabled() const { return m_htmlEnabled->isChecked(); } bool Step3::latexEnabled() const { return m_latexEnabled->isChecked(); } bool Step3::manEnabled() const { return m_manEnabled->isChecked(); } bool Step3::rtfEnabled() const { return m_rtfEnabled->isChecked(); } bool Step3::xmlEnabled() const { return m_xmlEnabled->isChecked(); } bool Step3::searchEnabled() const { return m_searchEnabled->isChecked(); } HtmlStyle Step3::htmlStyle() const { if (m_htmlOptions->find(0)->isOn()) { return HS_Plain; } else if (m_htmlOptions->find(1)->isOn()) { return HS_TreeView; } else if (m_htmlOptions->find(2)->isOn()) { return HS_CHM; } // broken radio button logic return HS_Plain; } TexStyle Step3::texStyle() const { switch (m_texOptions->selectedId()) { case 0: return TS_PDFHyper; case 1: return TS_PDF; case 2: return TS_PS; } return TS_PDFHyper; } void Step3::setHtmlEnabled(bool enable) { m_htmlEnabled->setChecked(enable); } void Step3::setLatexEnabled(bool enable) { m_latexEnabled->setChecked(enable); } void Step3::setManEnabled(bool enable) { m_manEnabled->setChecked(enable); } void Step3::setRtfEnabled(bool enable) { m_rtfEnabled->setChecked(enable); } void Step3::setXmlEnabled(bool enable) { m_xmlEnabled->setChecked(enable); } void Step3::setSearchEnabled(bool enable) { m_searchEnabled->setChecked(enable); } void Step3::setHtmlStyle(HtmlStyle style) { switch(style) { case HS_Plain: m_htmlOptions->setButton(0); break; case HS_TreeView: m_htmlOptions->setButton(1); break; case HS_CHM: m_htmlOptions->setButton(2); break; } } void Step3::setTexStyle(TexStyle style) { switch(style) { case TS_PDFHyper: m_texOptions->setButton(0); break; case TS_PDF: m_texOptions->setButton(1); break; case TS_PS: m_texOptions->setButton(2); break; } } //========================================================================== Step4::Step4(QWidget *parent) : QWidget(parent,"Step4") { QVBoxLayout *layout = new QVBoxLayout(this); m_diagramMode = new QButtonGroup("Diagrams to generate",this); QGridLayout *gbox = new QGridLayout( m_diagramMode, 5, 1, 8, 0 ); gbox->addRowSpacing( 0, fontMetrics().lineSpacing()+2 ); gbox->addWidget(new QRadioButton("No diagrams",m_diagramMode),1,0); gbox->addWidget(new QRadioButton("Use built-in class diagram generator",m_diagramMode),2,0); gbox->addWidget(new QRadioButton("Use dot tool from the GraphViz package to generate",m_diagramMode),3,0); QWidget *w = new QWidget(m_diagramMode); QHBoxLayout *bl = new QHBoxLayout(w); QButtonGroup *dotGroup = new QButtonGroup(w); dotGroup->hide(); m_dotOptions = new QVBox(w); dotGroup->insert(m_dotClass=new QCheckBox("Class diagrams",m_dotOptions)); dotGroup->insert(m_dotCollaboration=new QCheckBox("Collaboration diagrams",m_dotOptions)); dotGroup->insert(m_dotInclude=new QCheckBox("Include dependency graphs",m_dotOptions)); dotGroup->insert(m_dotIncludedBy=new QCheckBox("Included by dependency graphs",m_dotOptions)); dotGroup->insert(m_dotInheritance=new QCheckBox("Overall Class hierarchy",m_dotOptions)); dotGroup->insert(m_dotCall=new QCheckBox("Call graphs",m_dotOptions)); bl->addSpacing(30); bl->addWidget(m_dotOptions); dotGroup->setButton(0); m_dotOptions->setEnabled(FALSE); gbox->addWidget(w,4,0); #if defined(Q_OS_MACX) // we bundle dot with the mac package m_diagramMode->setButton(2); #else m_diagramMode->setButton(1); #endif layout->addWidget(m_diagramMode); layout->addStretch(1); connect(m_diagramMode,SIGNAL(clicked(int)), this,SLOT(diagramModeChanged(int))); connect(m_dotCall,SIGNAL(stateChanged(int)), parent,SLOT(changeCallGraphState(int))); } void Step4::diagramModeChanged(int buttonId) { m_dotOptions->setEnabled(buttonId==2); } void Step4::disableCallGraphs() { m_dotCall->setChecked(FALSE); } bool Step4::callGraphEnabled() const { return m_dotCall->isOn(); } DiagramMode Step4::diagramMode() const { switch(m_diagramMode->selectedId()) { case 0: return DM_None; case 1: return DM_Builtin; case 2: return DM_Dot; } return DM_None; } bool Step4::classDiagram() const { return m_dotClass->isChecked(); } bool Step4::collaborationDiagram() const { return m_dotCollaboration->isChecked(); } bool Step4::includeGraph() const { return m_dotInclude->isChecked(); } bool Step4::includedByGraph() const { return m_dotIncludedBy->isChecked(); } bool Step4::inheritanceGraph() const { return m_dotInheritance->isChecked(); } bool Step4::callGraph() const { return m_dotCall->isChecked(); } void Step4::setDiagramMode(DiagramMode mode) { switch(mode) { case DM_None: m_diagramMode->setButton(0); diagramModeChanged(0); break; case DM_Builtin: m_diagramMode->setButton(1); diagramModeChanged(1); break; case DM_Dot: m_diagramMode->setButton(2); diagramModeChanged(2); break; } } void Step4::setClassDiagram(bool enable) { m_dotClass->setChecked(enable); } void Step4::setCollaborationDiagram(bool enable) { m_dotCollaboration->setChecked(enable); } void Step4::setIncludeGraph(bool enable) { m_dotInclude->setChecked(enable); } void Step4::setIncludedByGraph(bool enable) { m_dotIncludedBy->setChecked(enable); } void Step4::setInheritanceGraph(bool enable) { m_dotInheritance->setChecked(enable); } void Step4::setCallGraph(bool enable) { m_dotCall->setChecked(enable); } //========================================================================== Wizard::Wizard(QWidget *parent=0) : QTabDialog(parent) { addTab( m_step1 = new Step1(this),"Project"); addTab( m_step2 = new Step2(this),"Mode"); addTab( m_step3 = new Step3(this),"Output"); addTab( m_step4 = new Step4(this),"Diagrams"); setCancelButton(); } void Wizard::changeCallGraphState(int state) { if (state==QButton::On && !m_step2->crossReferencingEnabled()) { if (QMessageBox::question(this,"This option depends on another option", "The call graph option requires that cross-referencing " "of source code is enabled.\nDo you want to enable this " "option?",QMessageBox::Yes,QMessageBox::No)==QMessageBox::Yes) { m_step2->enableCrossReferencing(); } else { m_step4->disableCallGraphs(); } } } void Wizard::changeCrossRefState(int state) { if (state==QButton::Off && m_step4->callGraphEnabled()) { if (QMessageBox::question(this,"Another option depends on this one", "The call graph option requires that cross-referencing " "of source code is enabled.\nDo you want to disable the call " "graph option?",QMessageBox::Yes,QMessageBox::No )==QMessageBox::Yes ) { m_step4->disableCallGraphs(); } else { m_step2->enableCrossReferencing(); } } } //========================================================================== MainWidget::MainWidget(QWidget *parent) : QMainWindow(parent,"MainWidget") { setCaption("Doxygen GUI frontend"); // initialize config settings Config::instance()->init(); Config::instance()->check(); Config_getBool("HAVE_DOT")=TRUE; #if defined(Q_OS_MACX) setDotPath(); setMscgenPath(); #endif QWidget *w = new QWidget(this); setCentralWidget(w); QVBoxLayout *layout = new QVBoxLayout(w); layout->setMargin(10); QPopupMenu *file = new QPopupMenu(this); file->insertItem("Open...", this, SLOT(loadConfigFile()), CTRL+Key_O); file->insertItem("Save As...", this, SLOT(saveConfigFile()), CTRL+Key_S); m_recentMenu = new QPopupMenu; file->insertItem( "&Recent configurations", m_recentMenu ); connect(m_recentMenu,SIGNAL(activated(int)),this,SLOT(openRecent(int))); file->insertItem("Set as default...",this,SLOT(saveDefaults()) ); file->insertItem("Reset...",this,SLOT(resetConfig()) ); file->insertItem("Quit", this, SLOT(quit()), CTRL+Key_Q); QPopupMenu *help = new QPopupMenu(this); #if defined(Q_OS_MACX) help->insertItem("Online manual", this, SLOT(manual()), Key_F1); #endif help->insertItem("About", this, SLOT(about()) ); menuBar()->insertItem("File",file); menuBar()->insertItem("Help",help); //--------------------------------------------------- QVBox *heading = new QVBox(w); QLabel *l = new QLabel("Step 1: Configure doxygen",heading); QFrame *f = new QFrame( heading ); f->setFrameStyle( QFrame::HLine | QFrame::Sunken ); //f->setFixedSize(l->sizeHint().width(),f->sizeHint().height()); layout->addWidget(heading); layout->addSpacing(10); l = new QLabel("Choose one of the following ways to configure doxygen",w); layout->addWidget(l); layout->addSpacing(5); QHBoxLayout *hbl = new QHBoxLayout(layout); hbl->setSpacing(8); m_wizard = new QPushButton("Wizard...",w); QToolTip::add(m_wizard,"Quickly configure the most important settings"); hbl->addWidget(m_wizard); m_expert = new QPushButton("Expert...",w); QToolTip::add(m_expert,"Determine all configuration settings in detail"); hbl->addWidget(m_expert); m_load = new QPushButton("Load...",w); QToolTip::add(m_load,"Load the configuration settings from file"); hbl->addWidget(m_load); hbl->addStretch(1); //--------------------------------------------------- heading = new QVBox(w); l = new QLabel("Step 2: Save the configuration file",heading); f = new QFrame( heading ); f->setFrameStyle( QFrame::HLine | QFrame::Sunken ); //f->setFixedSize(l->sizeHint().width(),f->sizeHint().height()); layout->addSpacing(15); layout->addWidget(heading); layout->addSpacing(5); QGridLayout *grid = new QGridLayout(layout,1,2,10); m_save = new QPushButton("Save...",w); m_save->setFixedSize(m_save->sizeHint()); grid->addWidget(m_save,0,0); grid->addWidget(m_saveStatus=new QLabel(w),0,1); m_saveStatus->setTextFormat(Qt::RichText); //--------------------------------------------------- heading = new QVBox(w); l = new QLabel("Step 3: Specify the directory from which to run doxygen",heading); f = new QFrame( heading ); f->setFrameStyle( QFrame::HLine | QFrame::Sunken ); //f->setFixedSize(l->sizeHint().width(),f->sizeHint().height()); layout->addSpacing(15); layout->addWidget(heading); layout->addSpacing(5); QHBoxLayout *row = new QHBoxLayout( layout ); row->setSpacing(10); row->addWidget(new QLabel("Working directory:",w)); m_workingDir = new QLineEdit(w); m_selWorkingDir = new QPushButton("Select...",w); row->addWidget(m_workingDir,1); row->addWidget(m_selWorkingDir); //--------------------------------------------------- heading = new QVBox(w); l = new QLabel("Step 4: Run doxygen",heading); f = new QFrame( heading ); f->setFrameStyle( QFrame::HLine | QFrame::Sunken ); //f->setFixedSize(l->sizeHint().width(),f->sizeHint().height()); layout->addSpacing(15); layout->addWidget(heading); layout->addSpacing(5); row = new QHBoxLayout( layout ); row->setSpacing(10); m_run = new QPushButton("Start",w); row->addWidget(m_run); row->addWidget(m_runStatus = new QLabel("Status: not running",w)); row->addStretch(1); m_run->setEnabled(FALSE); m_runStatus->setEnabled(FALSE); m_saveLog = new QPushButton("Save log...",w); m_saveLog->setEnabled(FALSE); row->addWidget(m_saveLog); layout->addSpacing(8); layout->addWidget(m_outputHeading=new QLabel("Output produced by doxygen",w)); grid = new QGridLayout(layout,1,1,3); m_outputLog = new QTextEdit(w); m_outputLog->setReadOnly(TRUE); m_outputLog->setMinimumWidth(600); grid->addWidget(m_outputLog,0,0); grid->setColStretch(0,1); grid->setRowStretch(0,1); m_outputLog->setEnabled(FALSE); m_outputHeading->setEnabled(FALSE); // make connections connect(m_wizard,SIGNAL(clicked()), this,SLOT(launchWizard())); connect(m_expert,SIGNAL(clicked()), this,SLOT(launchExpert())); connect(m_load,SIGNAL(clicked()), this,SLOT(loadConfigFile())); connect(m_save,SIGNAL(clicked()), this,SLOT(saveConfigFile())); connect(m_selWorkingDir,SIGNAL(clicked()), this,SLOT(selectWorkingDir())); connect(m_workingDir,SIGNAL(textChanged(const QString&)), this,SLOT(updateRunnable(const QString&))); connect(m_run,SIGNAL(clicked()), this,SLOT(runDoxygen())); connect(m_saveLog,SIGNAL(clicked()), this,SLOT(saveLog())); // load default settings m_settings.setPath("www.doxygen.org","Doxygen GUI"); bool ok; QString config = m_settings.readEntry("/doxywizard/config/default",QString::null,&ok); if (ok && !config.isEmpty()) { Config::instance()->parseString("default settings",config); } QString workingDir = m_settings.readEntry("/doxywizard/config/workingdir",QString::null,&ok); if (ok && !workingDir.isEmpty()) { m_workingDir->setText(workingDir); } setConfigSaved(FALSE); for (int i=0;i<10;i++) { QString entry = m_settings.readEntry(QString().sprintf("/doxywizard/recent/config%d",i)); if (!entry.isEmpty()) { addRecentFile(entry); } } m_runProcess = new QProcess; connect(m_runProcess,SIGNAL(readyReadStdout()),this,SLOT(readStdout())); connect(m_runProcess,SIGNAL(processExited()),this,SLOT(runComplete())); m_running = FALSE; m_timer = new QTimer; connect(m_timer,SIGNAL(timeout()),this,SLOT(readStdout())); statusBar()->message("Welcome to Doxygen",messageTimeout); } MainWidget::~MainWidget() { delete m_runProcess; } void MainWidget::selectWorkingDir() { QString selectedDir = QFileDialog::getExistingDirectory(m_workingDir->text()); if (!selectedDir.isEmpty()) { m_workingDir->setText(selectedDir); } } void MainWidget::updateRunnable(const QString &newDirName) { if (m_running) return; QFileInfo fi(newDirName); bool isRunnable = fi.exists() && fi.isDir() && m_configSaved; m_run->setEnabled(isRunnable); m_runStatus->setEnabled(isRunnable); m_outputHeading->setEnabled(isRunnable); m_outputLog->setEnabled(isRunnable); m_saveLog->setEnabled(isRunnable && !m_outputLog->text().isEmpty()); } void MainWidget::launchWizard() { Wizard wizard(this); // -------- Initialize the dialog ---------------- // step1 wizard.setProjectName(QString::fromLocal8Bit(Config_getString("PROJECT_NAME"))); wizard.setProjectNumber(QString::fromLocal8Bit(Config_getString("PROJECT_NUMBER"))); if (Config_getList("INPUT").count()>0) { QString dirName=Config_getList("INPUT").getFirst(); QFileInfo fi(dirName); if (fi.exists() && fi.isDir()) { wizard.setSourceDir(dirName); } } wizard.setRecursiveScan(Config_getBool("RECURSIVE")); wizard.setDestinationDir(QString::fromLocal8Bit(Config_getString("OUTPUT_DIRECTORY"))); // step2 wizard.setExtractAll(Config_getBool("EXTRACT_ALL")); wizard.setCrossReferencing(Config_getBool("SOURCE_BROWSER")); if (Config_getBool("OPTIMIZE_OUTPUT_JAVA")) { wizard.setOptimizeFor(Lang_Java); } else if (Config_getBool("OPTIMIZE_OUTPUT_FOR_C")) { wizard.setOptimizeFor(Lang_C); } else { wizard.setOptimizeFor(Lang_Cpp); } // step3 wizard.setHtmlEnabled(Config_getBool("GENERATE_HTML")); wizard.setLatexEnabled(Config_getBool("GENERATE_LATEX")); wizard.setManEnabled(Config_getBool("GENERATE_MAN")); wizard.setRtfEnabled(Config_getBool("GENERATE_RTF")); wizard.setXmlEnabled(Config_getBool("GENERATE_XML")); wizard.setSearchEnabled(Config_getBool("SEARCHENGINE")); if (Config_getBool("GENERATE_HTMLHELP")) { wizard.setHtmlStyle(HS_CHM); } else if (Config_getBool("GENERATE_TREEVIEW")) { wizard.setHtmlStyle(HS_TreeView); } else { wizard.setHtmlStyle(HS_Plain); } if (Config_getBool("USE_PDFLATEX")) { if (Config_getBool("PDF_HYPERLINKS")) { wizard.setTexStyle(TS_PDFHyper); } else { wizard.setTexStyle(TS_PDF); } } else { wizard.setTexStyle(TS_PS); } // step4 if (Config_getBool("HAVE_DOT")) { wizard.setDiagramMode(DM_Dot); } else if (Config_getBool("CLASS_DIAGRAMS")) { wizard.setDiagramMode(DM_Builtin); } else { wizard.setDiagramMode(DM_None); } wizard.setClassDiagram(Config_getBool("CLASS_GRAPH")); wizard.setCollaborationDiagram(Config_getBool("COLLABORATION_GRAPH")); wizard.setIncludeGraph(Config_getBool("INCLUDE_GRAPH")); wizard.setIncludedByGraph(Config_getBool("INCLUDED_BY_GRAPH")); wizard.setInheritanceGraph(Config_getBool("GRAPHICAL_HIERARCHY")); wizard.setCallGraph(Config_getBool("CALL_GRAPH")); // -------- Run the dialog ---------------- if (wizard.exec()==QDialog::Accepted) { // -------- Store the results ---------------- // step1 Config_getString("PROJECT_NAME")=wizard.getProjectName().local8Bit(); Config_getString("PROJECT_NUMBER")=wizard.getProjectNumber(); Config_getList("INPUT").clear(); Config_getList("INPUT").append(wizard.getSourceDir()); Config_getBool("RECURSIVE")=wizard.scanRecursively(); Config_getString("OUTPUT_DIRECTORY")=wizard.getDestinationDir().local8Bit(); // step2 if (wizard.extractAll()) { Config_getBool("EXTRACT_ALL")=TRUE; Config_getBool("EXTRACT_PRIVATE")=TRUE; Config_getBool("EXTRACT_STATIC")=TRUE; Config_getBool("EXTRACT_LOCAL_CLASSES")=TRUE; Config_getBool("HIDE_UNDOC_MEMBERS")=FALSE; Config_getBool("HIDE_UNDOC_CLASSES")=FALSE; } else { Config_getBool("EXTRACT_ALL")=FALSE; Config_getBool("EXTRACT_PRIVATE")=FALSE; Config_getBool("EXTRACT_STATIC")=FALSE; Config_getBool("EXTRACT_LOCAL_CLASSES")=TRUE; Config_getBool("HIDE_UNDOC_MEMBERS")=TRUE; Config_getBool("HIDE_UNDOC_CLASSES")=TRUE; } if (wizard.crossReferencing()) { Config_getBool("SOURCE_BROWSER")=TRUE; Config_getBool("REFERENCED_BY_RELATION")=TRUE; Config_getBool("REFERENCES_RELATION")=TRUE; Config_getBool("VERBATIM_HEADERS")=TRUE; } else { Config_getBool("SOURCE_BROWSER")=FALSE; Config_getBool("REFERENCED_BY_RELATION")=FALSE; Config_getBool("REFERENCES_RELATION")=FALSE; Config_getBool("VERBATIM_HEADERS")=FALSE; } switch(wizard.optimizeFor()) { case Lang_Cpp: Config_getBool("OPTIMIZE_OUTPUT_FOR_C")=FALSE; Config_getBool("OPTIMIZE_OUTPUT_JAVA")=FALSE; break; case Lang_Java: Config_getBool("OPTIMIZE_OUTPUT_FOR_C")=FALSE; Config_getBool("OPTIMIZE_OUTPUT_JAVA")=TRUE; break; case Lang_C: Config_getBool("OPTIMIZE_OUTPUT_FOR_C")=TRUE; Config_getBool("OPTIMIZE_OUTPUT_JAVA")=FALSE; break; case Lang_CS: Config_getBool("OPTIMIZE_OUTPUT_FOR_C")=FALSE; Config_getBool("OPTIMIZE_OUTPUT_JAVA")=TRUE; Config_getBool("EXTRACT_STATIC")=TRUE; Config_getBool("EXTRACT_LOCAL_CLASSES")=TRUE; break; } // step3 Config_getBool("GENERATE_HTML")=wizard.htmlEnabled(); Config_getBool("GENERATE_LATEX")=wizard.latexEnabled(); Config_getBool("GENERATE_MAN")=wizard.manEnabled(); Config_getBool("GENERATE_RTF")=wizard.rtfEnabled(); Config_getBool("GENERATE_XML")=wizard.xmlEnabled(); Config_getBool("SEARCHENGINE")=wizard.searchEnabled(); if (wizard.htmlEnabled()) { switch (wizard.htmlStyle()) { case HS_Plain: Config_getBool("GENERATE_HTMLHELP")=FALSE; Config_getBool("GENERATE_TREEVIEW")=FALSE; break; case HS_TreeView: Config_getBool("GENERATE_HTMLHELP")=FALSE; Config_getBool("GENERATE_TREEVIEW")=TRUE; break; case HS_CHM: Config_getBool("GENERATE_HTMLHELP")=TRUE; Config_getBool("GENERATE_TREEVIEW")=FALSE; break; } } if (wizard.latexEnabled()) { switch (wizard.texStyle()) { case TS_PDFHyper: Config_getBool("USE_PDFLATEX")=TRUE; Config_getBool("PDF_HYPERLINKS")=TRUE; break; case TS_PDF: Config_getBool("USE_PDFLATEX")=TRUE; Config_getBool("PDF_HYPERLINKS")=FALSE; break; case TS_PS: Config_getBool("USE_PDFLATEX")=FALSE; Config_getBool("PDF_HYPERLINKS")=FALSE; break; } } // step4 switch (wizard.diagramMode()) { case DM_None: Config_getBool("CLASS_DIAGRAMS")=FALSE; Config_getBool("HAVE_DOT")=FALSE; break; case DM_Builtin: Config_getBool("CLASS_DIAGRAMS")=TRUE; Config_getBool("HAVE_DOT")=FALSE; break; case DM_Dot: Config_getBool("CLASS_DIAGRAMS")=FALSE; Config_getBool("HAVE_DOT")=TRUE; Config_getBool("CLASS_GRAPH")=wizard.classDiagram(); Config_getBool("COLLABORATION_GRAPH")=wizard.collaborationDiagram(); Config_getBool("INCLUDE_GRAPH")=wizard.includeGraph(); Config_getBool("INCLUDED_BY_GRAPH")=wizard.includedByGraph(); Config_getBool("GRAPHICAL_HIERARCHY")=wizard.inheritanceGraph(); Config_getBool("CALL_GRAPH")=wizard.callGraph(); break; } #if defined(Q_OS_MACX) if (Config_getString("DOT_PATH").isEmpty()) { setDotPath(); } if (Config_getString("MSCGEN_PATH").isEmpty()) { setMscgenPath(); } #endif setConfigSaved(FALSE); } } void MainWidget::loadConfigFromFile(const QString &fn) { if (!Config::instance()->parse(fn)) { QMessageBox::warning(0,"Warning", "Could not open or read config file "+fn+"!", "abort" ); } else { Config::instance()->convertStrToVal(); #if 0 //defined(Q_OS_MACX) if (checkIfDotInstalled() && qstricmp(Config_getString("DOT_PATH"),DOT_PATH)!=0 ) { Config_getString("DOT_PATH")=DOT_PATH; setConfigSaved(FALSE); } else { setConfigSaved(TRUE); } #else setConfigSaved(TRUE); #endif addRecentFile(fn); m_workingDir->setText(QFileInfo(fn).dirPath(TRUE)); m_configFileName = fn; #if defined(Q_OS_MACX) if (Config_getString("DOT_PATH").isEmpty()) { setDotPath(); setConfigSaved(FALSE); } if (Config_getString("MSCGEN_PATH").isEmpty()) { setMscgenPath(); setConfigSaved(FALSE); } #endif statusBar()->message("New configuration loaded",messageTimeout); } } void MainWidget::loadConfigFile() { QString fn = QFileDialog::getOpenFileName(m_workingDir->text(),QString::null,this); if (!fn.isEmpty()) { loadConfigFromFile(fn); // set current dir to where the config file is located QDir::setCurrent(QFileInfo(fn).dirPath(TRUE)); } } void MainWidget::launchExpert() { Expert expert(this); expert.init(); expert.exec(); //#if defined(Q_OS_MACX) // setDotPath(); //#endif if (expert.hasChanged()) setConfigSaved(FALSE); } void MainWidget::saveDefaults() { if (QMessageBox::question(this,"Store settings as defaults", "Do you wish to use the " "current configuration settings as the default settings?", QMessageBox::Yes, QMessageBox::No)==QMessageBox::Yes) { QString newConfig; QTextStream t(&newConfig,IO_WriteOnly); Config::instance()->writeTemplate(t,TRUE,FALSE); m_settings.writeEntry("/doxywizard/config/default",newConfig); m_settings.writeEntry("/doxywizard/config/workingdir",m_workingDir->text()); statusBar()->message("Current configuration saved as default",messageTimeout); } } void MainWidget::saveConfigFile() { QString fn = QFileDialog::getSaveFileName(m_workingDir->text()+"/Doxyfile",QString::null,this); if (!fn.isEmpty()) { QFile f(fn); if (f.exists() && QMessageBox::question(this, "Overwrite file? -- Doxywizard", "A file called "+fn+" already exists. Do you want to overwrite it?", "&Yes","&no", QString::null, 0, 1) ) { statusBar()->message("Save request aborted",messageTimeout); return; } if (f.open(IO_WriteOnly)) { QTextStream t(&f); Config::instance()->writeTemplate(t,TRUE,FALSE); m_configFileName = fn; setConfigSaved(TRUE); addRecentFile(fn); statusBar()->message("Configuration saved",messageTimeout); } else { QMessageBox::warning(0,"Warning", "Cannot open file "+fn+" for writing. Nothing saved!","ok"); } } } void MainWidget::resetConfig() { if (QMessageBox::question(this,"Reset settings to their defaults", "Do you wish to reset the " "current configuration settings to their factory defaults?", QMessageBox::Yes, QMessageBox::No)==QMessageBox::Yes) { // initialize config settings Config::instance()->init(); #if defined(Q_OS_MACX) setDotPath(); setMscgenPath(); #endif m_configFileName = ""; setConfigSaved(FALSE); statusBar()->message("Configuration settings reset to their defaults",messageTimeout); } } void MainWidget::setConfigSaved(bool enable) { m_configSaved=enable; if (m_configSaved) { m_saveStatus->setText("Status: saved"); } else { m_saveStatus->setText("Status: not saved"); } updateRunnable(m_workingDir->text()); } void MainWidget::runDoxygen() { if (!m_running) { QString doxygenPath; #if defined(Q_OS_MACX) doxygenPath = getResourcePath(); #else // TODO: get the right value if not in the search path #endif //printf("Trying to run doxygen from path %s\n",doxygenPath.data()); m_runProcess->setCommunication(QProcess::Stdout| QProcess::Stderr| QProcess::DupStderr ); m_runProcess->setWorkingDirectory(QDir(m_workingDir->text())); m_runProcess->clearArguments(); m_runProcess->addArgument(doxygenPath+"doxygen"); m_runProcess->addArgument("-b"); m_runProcess->addArgument(m_configFileName); m_outputLog->clear(); if (!m_runProcess->start()) { m_outputLog->append(QString("*** Failed to run doxygen\n")); } else { m_running=TRUE; m_run->setText("Cancel"); m_runStatus->setText("Status: running"); m_timer->start(1000); } } else { m_running=FALSE; m_run->setText("Start"); m_runStatus->setText("Status: not running"); m_runProcess->kill(); m_timer->stop(); updateRunnable(m_workingDir->text()); } } void MainWidget::readStdout() { m_outputLog->append(QString(m_runProcess->readStdout())); } void MainWidget::runComplete() { if (m_running) { m_outputLog->append(QString("*** Doxygen has finished\n")); } else { m_outputLog->append(QString("*** Cancelled by user\n")); } m_run->setText("Start"); m_runStatus->setText("Status: not running"); m_running=FALSE; updateRunnable(m_workingDir->text()); } void MainWidget::about() { QString msg; QTextStream t(&msg,IO_WriteOnly); t << QString("
A tool to configure and run doxygen version ")+versionString+ " on your source files.


" "

Written by
Dimitri van Heesch
© 2000-2006

" ""; QMessageBox::about(this,"Doxygen GUI",msg); } void MainWidget::manual() { #if defined(Q_OS_MACX) const char *urlBytes = "http://www.doxygen.org/manual.html"; CFURLRef url = CFURLCreateWithBytes ( NULL, // allocator (UInt8*)urlBytes, // bytes strlen(urlBytes), // length kCFStringEncodingASCII, // encoding NULL // baseURL ); LSOpenCFURLRef(url,0); CFRelease(url); #endif } void MainWidget::addRecentFile(const QString &file) { QStringList::Iterator it = m_recentFiles.find(file); if (it!=m_recentFiles.end()) { // already found => move to top m_recentFiles.remove(it); m_recentFiles.prepend(file); } else { // not found if (m_recentFiles.count() < 10) // append { m_recentFiles.prepend(file); } else // add + drop last item { m_recentFiles.remove(m_recentFiles.last()); m_recentFiles.prepend(file); } } m_recentMenu->clear(); int i=0; for ( it = m_recentFiles.begin(); it != m_recentFiles.end(); ++it, ++i ) { m_recentMenu->insertItem(*it); m_settings.writeEntry(QString().sprintf("/doxywizard/recent/config%d",i),*it); } } void MainWidget::openRecent(int id) { loadConfigFromFile(m_recentMenu->text(id)); } void MainWidget::quit() { if (!m_configSaved && QMessageBox::warning( this, "DoxyWizard", "Quit and lose changes?", QMessageBox::Yes, QMessageBox::No)==QMessageBox::No ) return; // Quit cancelled by user qApp->quit(); } void MainWidget::saveLog() { QString fn = QFileDialog::getSaveFileName(m_workingDir->text()+"/doxygen_log.txt",QString::null,this); if (!fn.isEmpty()) { QFile f(fn); if (f.open(IO_WriteOnly)) { QTextStream t(&f); t << m_outputLog->text(); statusBar()->message("Output log saved",messageTimeout); } else { QMessageBox::warning(0,"Warning", "Cannot open file "+fn+" for writing. Nothing saved!","ok"); } } } //========================================================================== int main(int argc,char **argv) { QApplication a(argc,argv); MainWidget main; if (argc==2 && argv[1][0]!='-') // name of config file as an argument { main.loadConfigFromFile(argv[1]); } else if (argc>1) { printf("Usage: %s [config file]\n",argv[0]); exit(1); } a.setMainWidget(&main); main.show(); return a.exec(); }