#include #include "doxywizard.h" #include "version.h" #include "expert.h" #include "wizard.h" #ifdef WIN32 #include #endif #define MAX_RECENT_FILES 10 const int messageTimeout = 5000; //!< status bar message timeout in millisec. MainWindow &MainWindow::instance() { static MainWindow *theInstance = new MainWindow; return *theInstance; } MainWindow::MainWindow() : m_settings(QString::fromAscii("Doxygen.org"), QString::fromAscii("Doxywizard")) { QMenu *file = menuBar()->addMenu(tr("File")); file->addAction(tr("Open..."), this, SLOT(openConfig()), Qt::CTRL+Qt::Key_O); m_recentMenu = file->addMenu(tr("Open recent")); file->addAction(tr("Save"), this, SLOT(saveConfig()), Qt::CTRL+Qt::Key_S); file->addAction(tr("Save as..."), this, SLOT(saveConfigAs()), Qt::SHIFT+Qt::CTRL+Qt::Key_S); file->addAction(tr("Quit"), this, SLOT(quit()), Qt::CTRL+Qt::Key_Q); QMenu *settings = menuBar()->addMenu(tr("Settings")); settings->addAction(tr("Reset to factory defaults"), this,SLOT(resetToDefaults())); settings->addAction(tr("Use current settings at startup"), this,SLOT(makeDefaults())); settings->addAction(tr("Clear recent list"), this,SLOT(clearRecent())); QMenu *help = menuBar()->addMenu(tr("Help")); help->addAction(tr("Online manual"), this, SLOT(manual()), Qt::Key_F1); help->addAction(tr("About"), this, SLOT(about()) ); m_expert = new Expert; m_wizard = new Wizard(m_expert->modelData()); // ----------- top part ------------------ QWidget *topPart = new QWidget; QVBoxLayout *rowLayout = new QVBoxLayout(topPart); // select working directory QHBoxLayout *dirLayout = new QHBoxLayout; m_workingDir = new QLineEdit; m_selWorkingDir = new QPushButton(tr("Select...")); dirLayout->addWidget(m_workingDir); dirLayout->addWidget(m_selWorkingDir); //------------- bottom part -------------- QWidget *runTab = new QWidget; QVBoxLayout *runTabLayout = new QVBoxLayout(runTab); // run doxygen QHBoxLayout *runLayout = new QHBoxLayout; m_run = new QPushButton(tr("Run doxygen")); m_run->setEnabled(false); m_runStatus = new QLabel(tr("Status: not running")); m_saveLog = new QPushButton(tr("Save log...")); m_saveLog->setEnabled(false); QPushButton *showSettings = new QPushButton(tr("Show configuration")); runLayout->addWidget(m_run); runLayout->addWidget(m_runStatus); runLayout->addStretch(1); runLayout->addWidget(showSettings); runLayout->addWidget(m_saveLog); // output produced by doxygen runTabLayout->addLayout(runLayout); runTabLayout->addWidget(new QLabel(tr("Output produced by doxygen"))); QGridLayout *grid = new QGridLayout; m_outputLog = new QTextEdit; m_outputLog->setReadOnly(true); m_outputLog->setFontFamily(QString::fromAscii("courier")); m_outputLog->setMinimumWidth(600); grid->addWidget(m_outputLog,0,0); grid->setColumnStretch(0,1); grid->setRowStretch(0,1); QHBoxLayout *launchLayout = new QHBoxLayout; m_launchHtml = new QPushButton(tr("Show HTML output")); launchLayout->addWidget(m_launchHtml); launchLayout->addStretch(1); grid->addLayout(launchLayout,1,0); runTabLayout->addLayout(grid); QTabWidget *tabs = new QTabWidget; tabs->addTab(m_wizard,tr("Wizard")); tabs->addTab(m_expert,tr("Expert")); tabs->addTab(runTab,tr("Run")); rowLayout->addWidget(new QLabel(tr("Step 1: Specify the working directory from which doxygen will run"))); rowLayout->addLayout(dirLayout); rowLayout->addWidget(new QLabel(tr("Step 2: Configure doxygen using the Wizard and/or Expert tab, then switch to the Run tab to generate the documentation"))); rowLayout->addWidget(tabs); setCentralWidget(topPart); statusBar()->showMessage(tr("Welcome to Doxygen"),messageTimeout); m_runProcess = new QProcess; m_running = false; m_timer = new QTimer; // connect signals and slots connect(tabs,SIGNAL(currentChanged(int)),SLOT(selectTab(int))); connect(m_selWorkingDir,SIGNAL(clicked()),SLOT(selectWorkingDir())); connect(m_recentMenu,SIGNAL(triggered(QAction*)),SLOT(openRecent(QAction*))); connect(m_workingDir,SIGNAL(returnPressed()),SLOT(updateWorkingDir())); connect(m_runProcess,SIGNAL(readyReadStandardOutput()),SLOT(readStdout())); connect(m_runProcess,SIGNAL(finished(int, QProcess::ExitStatus)),SLOT(runComplete())); connect(m_timer,SIGNAL(timeout()),SLOT(readStdout())); connect(m_run,SIGNAL(clicked()),SLOT(runDoxygen())); connect(m_launchHtml,SIGNAL(clicked()),SLOT(showHtmlOutput())); connect(m_saveLog,SIGNAL(clicked()),SLOT(saveLog())); connect(showSettings,SIGNAL(clicked()),SLOT(showSettings())); connect(m_expert,SIGNAL(changed()),SLOT(configChanged())); loadSettings(); updateLaunchButtonState(); m_modified = false; updateTitle(); m_wizard->refresh(); } void MainWindow::closeEvent(QCloseEvent *event) { if (discardUnsavedChanges()) { saveSettings(); event->accept(); } else { event->ignore(); } } void MainWindow::quit() { if (discardUnsavedChanges()) { saveSettings(); } QApplication::exit(0); } void MainWindow::setWorkingDir(const QString &dirName) { QDir::setCurrent(dirName); m_workingDir->setText(dirName); m_run->setEnabled(!dirName.isEmpty()); } void MainWindow::selectWorkingDir() { QString dirName = QFileDialog::getExistingDirectory(this, tr("Select working directory"),m_workingDir->text()); if (!dirName.isEmpty()) { setWorkingDir(dirName); } } void MainWindow::updateWorkingDir() { setWorkingDir(m_workingDir->text()); } void MainWindow::manual() { QDesktopServices::openUrl(QUrl(QString::fromAscii("http://www.doxygen.org/manual.html"))); } void MainWindow::about() { QString msg; QTextStream t(&msg,QIODevice::WriteOnly); t << QString::fromAscii("
A tool to configure and run doxygen version ")+ QString::fromAscii(versionString)+ QString::fromAscii(" on your source files.


" "

Written by
Dimitri van Heesch
© 2000-2013

" ""); QMessageBox::about(this,tr("Doxygen GUI"),msg); } void MainWindow::openConfig() { if (discardUnsavedChanges(false)) { QString fn = QFileDialog::getOpenFileName(this, tr("Open configuration file"), m_workingDir->text()); if (!fn.isEmpty()) { loadConfigFromFile(fn); } } } void MainWindow::updateConfigFileName(const QString &fileName) { if (m_fileName!=fileName) { m_fileName = fileName; QString curPath = QFileInfo(fileName).path(); setWorkingDir(curPath); addRecentFile(fileName); updateTitle(); } } void MainWindow::loadConfigFromFile(const QString & fileName) { m_expert->loadConfig(fileName); m_wizard->refresh(); updateConfigFileName(fileName); updateLaunchButtonState(); m_modified = false; updateTitle(); } void MainWindow::saveConfig(const QString &fileName) { if (fileName.isEmpty()) return; QFile f(fileName); if (!f.open(QIODevice::WriteOnly)) { QMessageBox::warning(this, tr("Error saving"), tr("Error: cannot open the file ")+fileName+tr(" for writing!\n")+ tr("Reason given: ")+f.error()); return; } QTextStream t(&f); m_expert->writeConfig(t,false); updateConfigFileName(fileName); m_modified = false; updateTitle(); } bool MainWindow::saveConfig() { if (m_fileName.isEmpty()) { return saveConfigAs(); } else { saveConfig(m_fileName); return true; } } bool MainWindow::saveConfigAs() { QString fileName = QFileDialog::getSaveFileName(this, QString(), m_workingDir->text()+QString::fromAscii("/Doxyfile")); if (fileName.isEmpty()) return false; saveConfig(fileName); return true; } void MainWindow::makeDefaults() { if (QMessageBox::question(this,tr("Use current setting at startup?"), tr("Do you want to save the current settings " "and use them next time Doxywizard starts?"), QMessageBox::Save| QMessageBox::Cancel)==QMessageBox::Save) { //printf("MainWindow:makeDefaults()\n"); m_expert->saveSettings(&m_settings); m_settings.setValue(QString::fromAscii("wizard/loadsettings"), true); m_settings.sync(); } } void MainWindow::clearRecent() { if (QMessageBox::question(this,tr("Clear the list of recent files?"), tr("Do you want to clear the list of recently " "loaded configuration files?"), QMessageBox::Yes| QMessageBox::Cancel)==QMessageBox::Yes) { m_recentMenu->clear(); m_recentFiles.clear(); for (int i=0;iresetToDefaults(); m_settings.setValue(QString::fromAscii("wizard/loadsettings"), false); m_settings.sync(); m_wizard->refresh(); } } void MainWindow::loadSettings() { QVariant geometry = m_settings.value(QString::fromAscii("main/geometry"), QVariant::Invalid); QVariant state = m_settings.value(QString::fromAscii("main/state"), QVariant::Invalid); QVariant wizState = m_settings.value(QString::fromAscii("wizard/state"), QVariant::Invalid); QVariant loadSettings = m_settings.value(QString::fromAscii("wizard/loadsettings"), QVariant::Invalid); QVariant workingDir = m_settings.value(QString::fromAscii("wizard/workingdir"), QVariant::Invalid); if (geometry !=QVariant::Invalid) restoreGeometry(geometry.toByteArray()); if (state !=QVariant::Invalid) restoreState (state.toByteArray()); if (wizState !=QVariant::Invalid) m_wizard->restoreState(wizState.toByteArray()); if (loadSettings!=QVariant::Invalid && loadSettings.toBool()) { m_expert->loadSettings(&m_settings); if (workingDir!=QVariant::Invalid && QDir(workingDir.toString()).exists()) { setWorkingDir(workingDir.toString()); } } for (int i=0;isaveState()); m_settings.setValue(QString::fromAscii("wizard/workingdir"), m_workingDir->text()); } void MainWindow::selectTab(int id) { if (id==0) m_wizard->refresh(); } void MainWindow::addRecentFile(const QString &fileName) { int i=m_recentFiles.indexOf(fileName); if (i!=-1) m_recentFiles.removeAt(i); // not found if (m_recentFiles.count() < MAX_RECENT_FILES) // append { m_recentFiles.prepend(fileName); } else // add + drop last item { m_recentFiles.removeLast(); m_recentFiles.prepend(fileName); } m_recentMenu->clear(); i=0; foreach( QString str, m_recentFiles ) { m_recentMenu->addAction(str); m_settings.setValue(QString().sprintf("recent/config%d",i++),str); } for (;itext()); } } void MainWindow::runDoxygen() { if (!m_running) { QString doxygenPath; #if defined(Q_OS_MACX) doxygenPath = qApp->applicationDirPath()+QString::fromAscii("/../Resources/"); qDebug() << tr("Doxygen path: ") << doxygenPath; if ( !QFile(doxygenPath + QString::fromAscii("doxygen")).exists() ) { // No doygen binary in the resources, if there is a system doxygen binary, use that instead if ( QFile(QString::fromAscii("/usr/local/bin/doxygen")).exists() ) { doxygenPath = QString::fromAscii("/usr/local/bin/"); } else { qDebug() << tr("Can't find the doxygen command, make sure it's in your $$PATH"); doxygenPath = QString::fromAscii(""); } } qDebug() << tr("Getting doxygen from: ") << doxygenPath; #endif m_runProcess->setReadChannel(QProcess::StandardOutput); m_runProcess->setProcessChannelMode(QProcess::MergedChannels); m_runProcess->setWorkingDirectory(m_workingDir->text()); QStringList env=QProcess::systemEnvironment(); // set PWD environment variable to m_workingDir env.replaceInStrings(QRegExp(QString::fromAscii("^PWD=(.*)"),Qt::CaseInsensitive), QString::fromAscii("PWD=")+m_workingDir->text()); m_runProcess->setEnvironment(env); QStringList args; args << QString::fromAscii("-b"); // make stdout unbuffered args << QString::fromAscii("-"); // read config from stdin m_outputLog->clear(); m_runProcess->start(doxygenPath + QString::fromAscii("doxygen"), args); if (!m_runProcess->waitForStarted()) { m_outputLog->append(QString::fromAscii("*** Failed to run doxygen\n")); return; } QTextStream t(m_runProcess); m_expert->writeConfig(t,false); m_runProcess->closeWriteChannel(); if (m_runProcess->state() == QProcess::NotRunning) { m_outputLog->append(QString::fromAscii("*** Failed to run doxygen\n")); } else { m_saveLog->setEnabled(false); m_running=true; m_run->setText(tr("Stop doxygen")); m_runStatus->setText(tr("Status: running")); m_timer->start(1000); } } else { m_running=false; m_run->setText(tr("Run doxygen")); m_runStatus->setText(tr("Status: not running")); m_runProcess->kill(); m_timer->stop(); //updateRunnable(m_workingDir->text()); } } void MainWindow::readStdout() { if (m_running) { QByteArray data = m_runProcess->readAllStandardOutput(); QString text = QString::fromLocal8Bit(data); if (!text.isEmpty()) { m_outputLog->append(text.trimmed()); } } } void MainWindow::runComplete() { if (m_running) { m_outputLog->append(tr("*** Doxygen has finished\n")); } else { m_outputLog->append(tr("*** Cancelled by user\n")); } m_outputLog->ensureCursorVisible(); m_run->setText(tr("Run doxygen")); m_runStatus->setText(tr("Status: not running")); m_running=false; updateLaunchButtonState(); //updateRunnable(m_workingDir->text()); m_saveLog->setEnabled(true); } void MainWindow::updateLaunchButtonState() { m_launchHtml->setEnabled(m_expert->htmlOutputPresent(m_workingDir->text())); #if 0 m_launchPdf->setEnabled(m_expert->pdfOutputPresent(m_workingDir->text())); #endif } void MainWindow::showHtmlOutput() { QString indexFile = m_expert->getHtmlOutputIndex(m_workingDir->text()); QFileInfo fi(indexFile); // TODO: the following doesn't seem to work with IE #ifdef WIN32 //QString indexUrl(QString::fromAscii("file:///")); ShellExecute(NULL, L"open", (LPCWSTR)fi.absoluteFilePath().utf16(), NULL, NULL, SW_SHOWNORMAL); #else QString indexUrl(QString::fromAscii("file://")); indexUrl+=fi.absoluteFilePath(); QDesktopServices::openUrl(QUrl(indexUrl)); #endif } void MainWindow::saveLog() { QString fn = QFileDialog::getSaveFileName(this, tr("Save log file"), m_workingDir->text()+ QString::fromAscii("/doxygen_log.txt")); if (!fn.isEmpty()) { QFile f(fn); if (f.open(QIODevice::WriteOnly)) { QTextStream t(&f); t << m_outputLog->toPlainText(); statusBar()->showMessage(tr("Output log saved"),messageTimeout); } else { QMessageBox::warning(0,tr("Warning"), tr("Cannot open file ")+fn+tr(" for writing. Nothing saved!"),tr("ok")); } } } void MainWindow::showSettings() { QString text; QTextStream t(&text); m_expert->writeConfig(t,true); m_outputLog->clear(); m_outputLog->append(text); m_outputLog->ensureCursorVisible(); m_saveLog->setEnabled(true); } void MainWindow::configChanged() { m_modified = true; updateTitle(); } void MainWindow::updateTitle() { QString title = tr("Doxygen GUI frontend"); if (m_modified) { title+=QString::fromAscii(" +"); } if (!m_fileName.isEmpty()) { title+=QString::fromAscii(" (")+m_fileName+QString::fromAscii(")"); } setWindowTitle(title); } bool MainWindow::discardUnsavedChanges(bool saveOption) { if (m_modified) { QMessageBox::StandardButton button; if (saveOption) { button = QMessageBox::question(this, tr("Unsaved changes"), tr("Unsaved changes will be lost! Do you want to save the configuration file?"), QMessageBox::Save | QMessageBox::Discard | QMessageBox::Cancel ); if (button==QMessageBox::Save) { return saveConfig(); } } else { button = QMessageBox::question(this, tr("Unsaved changes"), tr("Unsaved changes will be lost! Do you want to continue?"), QMessageBox::Discard | QMessageBox::Cancel ); } return button==QMessageBox::Discard; } return true; } //----------------------------------------------------------------------- int main(int argc,char **argv) { QApplication a(argc,argv); MainWindow &main = MainWindow::instance(); if (argc==2 && argv[1][0]!='-') // name of config file as an argument { main.loadConfigFromFile(QString::fromLocal8Bit(argv[1])); } else if (argc>1) { printf("Usage: %s [config file]\n",argv[0]); exit(1); } main.show(); return a.exec(); }