/****************************************************************************** * * * * Copyright (C) 1997-2001 by Dimitri van Heesch. * * Permission to use, copy, modify, and distribute this software and its * documentation under the terms of the GNU General Public License is hereby * granted. No representations are made about the suitability of this software * for any purpose. It is provided "as is" without express or implied warranty. * See the GNU General Public License for more details. * * Documents produced by Doxygen are derivative works derived from the * input used in their production; they are not affected by this license. * */ /*! \page config Configuration \subsection config_format Format A configuration file is a free-form ASCII text file with a structure that is similar to that of a Makefile. It is parsed by \c doxygen. The file may contain tabs and newlines for formatting purposes. The statements in the file are case-sensitive. Comments may be placed anywhere within the file (except within quotes). Comments begin with the \# character and end at the end of the line. The file essentially consists of a list of assignment statements. Each statement consists of a \c TAG_NAME written in capitals, followed by the = character and one or more values. If the same tag is assigned more than once, the last assignment overwrites any earlier assignment. For options that take a list as their argument, the += operator can be used instead of = to append new values to the list. Values are sequences of non-blanks. If the value should contain one or more blanks it must be surrounded by quotes ("..."). Multiple lines can be concatenated by inserting a backslash (\\) as the last character of a line. Environment variables can be expanded using the pattern \c $(ENV_VARIABLE_NAME). You can also include part of a configuration file from another configuration file using a \@INCLUDE tag as follows: \verbatim @INCLUDE = config_file_name \endverbatim The include file is searched in the current working directory. You can also specify a list of directories that should be searched before looking in the current working directory. Do this by putting a \@INCLUDE_PATH tag with these paths before the \@INCLUDE tag, e.g: \verbatim @INCLUDE_PATH = my_config_dir \endverbatim The configuration options can be divided into several categories. Below is an alphabetical index of the tags that are recognized followed by the descriptions of the tags grouped by category. \htmlonly \endhtmlonly \latexonly \end{CompactList} \end{multicols} \normalsize \endlatexonly \subsection config_general General options \anchor cfg_project_name
\c PROJECT_NAME
\addindex PROJECT_NAME The \c PROJECT_NAME tag is a single word (or a sequence of words surrounded by double-quotes) that should identify the project for which the documentation is generated. This name is used in the title of most generated pages and in a few other places. \anchor cfg_project_number
\c PROJECT_NUMBER
\addindex PROJECT_NUMBER The \c PROJECT_NUMBER tag can be used to enter a project or revision number. This could be handy for archiving the generated documentation or if some version control system is used. \anchor cfg_output_directory
\c OUTPUT_DIRECTORY
\addindex OUTPUT_DIRECTORY The \c OUTPUT_DIRECTORY tag is used to specify the (relative or absolute) path into which the generated documentation will be written. If a relative path is entered, it will be relative to the location where doxygen was started. If left blank the current directory will be used. \anchor cfg_output_language
\c OUTPUT_LANGUAGE
\addindex OUTPUT_LANGUAGE The \c OUTPUT_LANGUAGE tag is used to specify the language in which all documentation generated by doxygen is written. Doxygen will use this information to generate all constant output in the proper language. The default language is English, other supported languages are: Dutch, French, Italian, Czech, Swedish, German, Finnish, Hungarian, Japanese, Korean, Spanish, Russian, Croatian, Polish and Portuguese. \anchor cfg_extract_all
\c EXTRACT_ALL
\addindex EXTRACT_ALL If the \c EXTRACT_ALL tag is set to \c YES doxygen will assume all entities in documentation are documented, even if no documentation was available. Private class members and static file members will be hidden unless the \c EXTRACT_PRIVATE and \c EXTRACT_STATIC tags are set to \c YES \par Note: This will also disable the warnings about undocumented members that are normally produced when \c WARNINGS is set to \c YES \anchor cfg_extract_private
\c EXTRACT_PRIVATE
\addindex EXTRACT_PRIVATE If the \c EXTRACT_PRIVATE tag is set to \c YES all private members of a class will be included in the documentation. \anchor cfg_extract_static
\c EXTRACT_STATIC
\addindex EXTRACT_STATIC If the \c EXTRACT_STATIC tag is set to \c YES all static members of a file will be included in the documentation. \anchor cfg_hide_undoc_members
\c HIDE_UNDOC_MEMBERS
\addindex HIDE_UNDOC_MEMBERS If the \c HIDE_UNDOC_MEMBERS tag is set to \c YES, doxygen will hide all undocumented members inside documented classes or files. If set to \c NO (the default) these members will be included in the various overviews, but no documentation section is generated. This option has no effect if \c EXTRACT_ALL is enabled. \anchor cfg_hide_undoc_classes
\c HIDE_UNDOC_CLASSES
\addindex HIDE_UNDOC_CLASSES If the \c HIDE_UNDOC_CLASSESS tag is set to \c YES, doxygen will hide all undocumented classes. If set to \c NO (the default) these classes will be included in the various overviews. This option has no effect if \c EXTRACT_ALL is enabled. \anchor cfg_brief_member_desc
\c BRIEF_MEMBER_DESC
\addindex BRIEF_MEMBER_DESC If the \c BRIEF_MEMBER_DESC tag is set to \c YES (the default) doxygen will include brief member descriptions after the members that are listed in the file and class documentation (similar to JavaDoc). Set to NO to disable this. \anchor cfg_repeat_brief
\c REPEAT_BRIEF
\addindex REPEAT_BRIEF If the \c REPEAT_BRIEF tag is set to \c YES (the default) doxygen will prepend the brief description of a member or function before the detailed description \par Note: If both \c HIDE_UNDOC_MEMBERS and \c BRIEF_MEMBER_DESC are set to \c NO, the brief descriptions will be completely suppressed. \anchor cfg_always_detailed_sec
\c ALWAYS_DETAILED_SEC
\addindex ALWAYS_DETAILED_SEC If the \c ALWAYS_DETAILED_SEC and \c REPEAT_BRIEF tags are both set to \c YES then doxygen will generate a detailed section even if there is only a brief description. \anchor cfg_full_path_names
\c FULL_PATH_NAMES
\addindex FULL_PATH_NAMES If the \c FULL_PATH_NAMES tag is set to \c YES doxygen will prepend the full path before files name in the file list and in the header files. If set to NO the shortest path that makes the file name unique will be used \anchor cfg_strip_from_path
\c STRIP_FROM_PATH
\addindex STRIP_FROM_PATH If the \c FULL_PATH_NAMES tag is set to \c YES then the \c STRIP_FROM_PATH tag can be used to strip a user defined part of the path. Stripping is only done if one of the specified strings matches the left-hand part of the path. \anchor cfg_internal_docs
\c INTERNAL_DOCS
\addindex INTERNAL_DOCS The \c INTERNAL_DOCS tag determines if documentation that is typed after a \\internal command is included. If the tag is set to \c NO (the default) then the documentation will be excluded. Set it to \c YES to include the internal documentation. \anchor cfg_class_diagrams
\c CLASS_DIAGRAMS
\addindex CLASS_DIAGRAMS If the \c CLASS_DIAGRAMS tag is set to \c YES (the default) doxygen will generate a class diagram (in HTML and \f$\mbox{\LaTeX}\f$) for classes with base or super classes. Setting the tag to \c NO turns the diagrams off. \anchor cfg_source_browser
\c SOURCE_BROWSER
\addindex SOURCE_BROWSER If the \c SOURCE_BROWSER tag is set to \c YES then a list of source files will be generated. Documented entities will be cross-referenced with these sources. \anchor cfg_inline_sources
\c INLINE_SOURCES
\addindex INLINE_SOURCES Setting the \c INLINE_SOURCES tag to \c YES will include the body of functions, classes and enums directly into the documentation. \anchor cfg_strip_code_comments
\c STRIP_CODE_COMMENTS
\addindex STRIP_CODE_COMMENTS Setting the \c STRIP_CODE_COMMENTS tag to \c YES (the default) will instruct doxygen to hide any special comment blocks from generated source code fragments. Normal C and C++ comments will always remain visible. \anchor cfg_case_sense_names
\c CASE_SENSE_NAMES
\addindex CASE_SENSE_NAMES If the \c CASE_SENSE_NAMES tag is set to \c NO (the default) then doxygen will only generate file names in lower case letters. If set to \c YES upper case letters are also allowed. This is useful if you have classes or files whose names only differ in case and if your file system supports case sensitive file names. \anchor cfg_short_names
\c SHORT_NAMES
\addindex SHORT_NAMES If the \c SHORT_NAMES tag is set to \c YES, doxygen will generate much shorter (but less readable) file names. This can be useful is your file systems doesn't support long names like on DOS, Mac, or CD-ROM. \anchor cfg_hide_scope_names
\c HIDE_SCOPE_NAMES
\addindex HIDE_SCOPE_NAMES If the \c HIDE_SCOPE_NAMES tag is set to \c NO (the default) then doxygen will show members with their full class and namespace scopes in the documentation. If set to \c YES the scope will be hidden. \anchor cfg_verbatim_headers
\c VERBATIM_HEADERS
\addindex VERBATIM_HEADERS If the \c VERBATIM_HEADERS tag is set the \c YES (the default) then doxygen will generate a verbatim copy of the header file for each class for which an include is specified. Set to NO to disable this. \sa Section \ref cmdclass "\\class". \anchor cfg_show_include_files
\c SHOW_INCLUDE_FILES
\addindex SHOW_INCLUDE_FILES If the SHOW_INCLUDE_FILES tag is set to YES (the default) then doxygen will put list of the files that are included by a file in the documentation of that file. \anchor cfg_javadoc_autobrief
\c JAVADOC_AUTOBRIEF
\addindex JAVADOC_AUTOBRIEF If the \c JAVADOC_AUTOBRIEF is set to \c YES then doxygen will interpret the first line (until the first dot) of a JavaDoc-style comment as the brief description. If set to NO (the default), the Javadoc-style will behave just like the Qt-style comments. \anchor cfg_inherit_docs
\c INHERIT_DOCS
\addindex INHERIT_DOCS If the \c INHERIT_DOCS tag is set to \c YES (the default) then an undocumented member inherits the documentation from any documented member that it reimplements. \anchor cfg_inline_info
\c INLINE_INFO
\addindex INLINE_INFO If the \c INLINE_INFO tag is set to \c YES (the default) then a tag [inline] is inserted in the documentation for inline members. \anchor cfg_sort_member_docs
\c SORT_MEMBER_DOCS
\addindex SORT_MEMBER_DOCS If the \c SORT_MEMBER_DOCS tag is set to \c YES (the default) then doxygen will sort the (detailed) documentation of file and class members alphabetically by member name. If set to \c NO the members will appear in declaration order. \anchor cfg_distribute_group_doc
\c DISTRIBUTE_GROUP_DOC
\addindex DISTRIBUTE_GROUP_DOC If member grouping is used in the documentation and the DISTRIBUTE_GROUP_DOC tag is set to YES, then doxygen will reuse the documentation of the first member in the group (if any) for the other members of the group. By default all members of a group must be documented explicitly. \anchor cfg_tab_size
\c TAB_SIZE
\addindex TAB_SIZE the \c TAB_SIZE tag can be used to set the number of spaces in a tab. Doxygen uses this value to replace tabs by spaces in code fragments. \anchor cfg_enabled_sections
\c ENABLED_SECTIONS
\addindex ENABLED_SECTIONS The \c ENABLED_SECTIONS tag can be used to enable conditional documentation sections, marked by \ref cmdif "\\if" \ ... \ref cmdendif "\\endif" blocks. \anchor cfg_generate_todolist
\c GENERATE_TODOLIST
\addindex GENERATE_TODOLIST The GENERATE_TODOLIST tag can be used to enable (YES) or disable (NO) the todo list. This list is created by putting \ref cmdtodo "\\todo" commands in the documentation. \anchor cfg_generate_testlist
\c GENERATE_TESTLIST
\addindex GENERATE_TESTLIST The GENERATE_TESTLIST tag can be used to enable (YES) or disable (NO) the test list. This list is created by putting \ref cmdtest "\\test" commands in the documentation. \anchor cfg_generate_buglist
\c GENERATE_BUGLIST
\addindex GENERATE_BUGLIST The GENERATE_BUGLIST tag can be used to enable (YES) or disable (NO) the bug list. This list is created by putting \ref cmdbug "\\bug" commands in the documentation. \anchor cfg_aliases
\c ALIASES
\addindex ALIASES This tag can be used to specify a number of aliases that acts as commands in the documentation. An alias has the form \verbatim name=value \endverbatim For example adding \verbatim "sideeffect=\par Side Effects:\n" \endverbatim will allow you to put the command \\sideeffect (or \@sideeffect) in the documentation, which will result in a user defined paragraph with heading "Side Effects:". You can put \\n's in the value part of an alias to insert newlines. \anchor cfg_max_initializer_lines
\c MAX_INITIALIZER_LINES
\addindex MAX_INITIALIZER_LINES The \c MAX_INITIALIZER_LINES tag determines the maximum number of lines that the initial value of a variable or define can be. If the initializer consists of more lines than specified here it will be hidden. Use a value of 0 to hide initializers completely. The appearance of the value of individual variables and defines can be controlled using \ref cmdshowinitializer "\\showinitializer" or \ref cmdhideinitializer "\hideinitializer" command in the documentation. \anchor cfg_optimize_output_for_c
\c OPTIMIZE_OUTPUT_FOR_C
\addindex OPTIMIZE_OUTPUT_FOR_C Set the \c OPTIMIZE_OUTPUT_FOR_C tag to \c YES if your project consists of C sources only. Doxygen will then generate output that is more tailored for C. For instance some of the names that are used will be different. The list of all members will be omitted, etc. \anchor cfg_show_used_files
\c SHOW_USED_FILES
\addindex SHOW_USED_FILES Set the \c SHOW_USED_FILES tag to \c NO to disable the list of files generated at the bottom of the documentation of classes and structs. If set to \c YES the list will mention the files that were used to generate the documentation.
\subsection messages_input Options related to warning and progress messages \anchor cfg_quiet
\c QUIET
\addindex QUIET The \c QUIET tag can be used to turn on/off the messages that are generated to standard output by doxygen. Possible values are \c YES and \c NO, where \c YES implies that the messages are off. If left blank \c NO is used. \anchor cfg_warnings
\c WARNINGS
\addindex WARNINGS The \c WARNINGS tag can be used to turn on/off the warning messages that are generated to standard error by doxygen. Possible values are \c YES and \c NO, where \c YES implies that the warnings are on. If left blank \c NO is used. \b Tip: Turn warnings on while writing the documentation. \anchor cfg_warn_if_undocumented
\c WARN_IF_UNDOCUMENTED
\addindex WARN_IF_UNDOCUMENTED If \c WARN_IF_UNDOCUMENTED is set to \c YES, then doxygen will generate warnings for undocumented members. If \c EXTRACT_ALL is set to \c YES then this flag will automatically be disabled. \anchor cfg_warn_format
\c WARN_FORMAT
\addindex WARN_FORMAT The \c WARN_FORMAT tag determines the format of the warning messages that doxygen can produce. The string should contain the \$file, \$line, and \$text tags, which will be replaced by the file and line number from which the warning originated and the warning text. \anchor cfg_warn_logfile
\c WARN_LOGFILE
\addindex WARN_LOGFILE The \c WARN_LOGFILE tag can be used to specify a file to which warning and error messages should be written. If left blank the output is written to stderr.
\subsection config_input Input related options \anchor cfg_input
\c INPUT
\addindex INPUT The \c INPUT tag is used to specify the files and/or directories that contain documented source files. You may enter file names like \c myfile.cpp or directories like \c /usr/src/myproject. Separate the files or directories with spaces.
\b Note: This tag (and only this tag) is \e required. \anchor cfg_file_patterns
\c FILE_PATTERNS
\addindex FILE_PATTERNS If the value of the \c INPUT tag contains directories, you can use the \c FILE_PATTERNS tag to specify one or more wildcard patterns (like \c *.cpp and \c *.h ) to filter out the source-files in the directories. If left blank all files are included (i.e. wildcard *). \anchor cfg_recursive
\c RECURSIVE
\addindex RECURSIVE The \c RECURSIVE tag can be used to specify whether or not subdirectories should be searched for input files as well. Possible values are \c YES and \c NO. If left blank \c NO is used. \anchor cfg_exclude
\c EXCLUDE
\addindex EXCLUDE The \c EXCLUDE tag can be used to specify files and/or directories that should excluded from the \c INPUT source files. This way you can easily exclude a subdirectory from a directory tree whose root is specified with the \c INPUT tag. \anchor cfg_exclude_patterns
\c EXCLUDE_PATTERNS
\addindex EXCLUDE_PATTERNS If the value of the \c INPUT tag contains directories, you can use the \c EXCLUDE_PATTERNS tag to specify one or more wildcard patterns to exclude certain files from those directories. \anchor cfg_example_path
\c EXAMPLE_PATH
\addindex EXAMPLE_PATH The \c EXAMPLE_PATH tag can be used to specify one or more files or directories that contain example code fragments that are included (see the \\include command in section \ref cmdinclude "\\include"). \anchor cfg_example_patterns
\c EXAMPLE_PATTERNS
\addindex EXAMPLE_PATTERNS If the value of the \c EXAMPLE_PATH tag contains directories, you can use the \c EXAMPLE_PATTERNS tag to specify one or more wildcard pattern (like *.cpp and *.h) to filter out the source-files in the directories. If left blank all files are included. \anchor cfg_image_path
\c IMAGE_PATH
\addindex IMAGE_PATH The \c IMAGE_PATH tag can be used to specify one or more files or directories that contain images that are to be included in the documentation (see the \ref cmdimage "\image" command). \anchor cfg_input_filter
\c INPUT_FILTER
\addindex INPUT_FILTER The \c INPUT_FILTER tag can be used to specify a program that doxygen should invoke to filter for each input file. Doxygen will invoke the filter program by executing (via popen()) the command: \verbatim \endverbatim where \ is the value of the \c INPUT_FILTER tag, and \ is the name of an input file. Doxygen will then use the output that the filter program writes to standard output. \anchor cfg_filter_source_files
\c FILTER_SOURCE_FILES
\addindex FILTER_SOURCE_FILES If the \c FILTER_SOURCE_FILES tag is set to \c YES, the input filter (if set using \c INPUT_FILTER ) will be used to filter the input files when producing source files to browse.
\subsection alphabetical_index Alphabetical index options \anchor cfg_alphabetical_index
\c ALPHABETICAL_INDEX
\addindex ALPHABETICAL_INDEX If the \c ALPHABETICAL_INDEX tag is set to \c YES, an alphabetical index of all compounds will be generated. Enable this if the project contains a lot of classes, structs, unions or interfaces. \anchor cfg_cols_in_alpha_index
\c COLS_IN_ALPHA_INDEX
\addindex COLS_IN_ALPHA_INDEX If the alphabetical index is enabled (see \c ALPHABETICAL_INDEX) then the \c COLS_IN_ALPHA_INDEX tag can be used to specify the number of columns in which this list will be split (can be a number in the range [1..20]) \anchor cfg_ignore_prefix
\c IGNORE_PREFIX
\addindex IGNORE_PREFIX In case all classes in a project start with a common prefix, all classes will be put under the same header in the alphabetical index. The \c IGNORE_PREFIX tag can be used to specify a prefix (or a list of prefixes) that should be ignored while generating the index headers.
\subsection html_output HTML related options \anchor cfg_generate_html
\c GENERATE_HTML
\addindex GENERATE_HTML If the \c GENERATE_HTML tag is set to \c YES (the default) doxygen will generate HTML output \anchor cfg_html_output
\c HTML_OUTPUT
\addindex HTML_OUTPUT The \c HTML_OUTPUT tag is used to specify where the HTML docs will be put. If a relative path is entered the value of \c OUTPUT_DIRECTORY will be put in front of it. If left blank `html' will be used as the default path. \anchor cfg_html_header
\c HTML_HEADER
\addindex HTML_HEADER The \c HTML_HEADER tag can be used to specify a user defined HTML header file for each generated HTML page. To get valid HTML the header file should contain at least a \c and a \c tag, but it is good idea to include the style sheet that is generated by doxygen as well. Minimal example: \verbatim My title \endverbatim If the tag is left blank doxygen will generate a standard header. The following commands have a special meaning inside the header: \$title, \$datetime, \$date, \$doxygenversion, \$projectname, \$projectnumber. Doxygen will replace them by respectively the title of the page, the current date and time, only the current date, the version number of doxygen, the project name (see \c PROJECT_NAME), or the project number (see \c PROJECT_NUMBER). See also section \ref doxygen_usage for information on how to generate the default header that doxygen normally uses. \anchor cfg_html_footer
\c HTML_FOOTER
\addindex HTML_FOOTER The \c HTML_FOOTER tag can be used to specify a user defined HTML footer for each generated HTML page. To get valid HTML the header file should contain at least a \c and a \c tag. A minimal example: \verbatim \endverbatim If the tag is left blank doxygen will generate a standard footer. The following commands have a special meaning inside the header: \$title, \$datetime, \$date, \$doxygenversion, \$projectname, \$projectnumber. Doxygen will replace them by respectively the title of the page, the current date and time, only the current date, the version number of doxygen, the project name (see \c PROJECT_NAME), or the project number (see \c PROJECT_NUMBER). See also section \ref doxygen_usage for information on how to generate the default footer that doxygen normally uses. \anchor cfg_html_stylesheet
\c HTML_STYLESHEET
\addindex HTML_STYLESHEET The \c HTML_STYLESHEET tag can be used to specify a user defined cascading style sheet that is used by each HTML page. It can be used to fine-tune the look of the HTML output. If the tag is left blank doxygen will generate a default style sheet. See also section \ref doxygen_usage for information on how to generate the style sheet that doxygen normally uses. \anchor cfg_html_align_members
\c HTML_ALIGN_MEMBERS
\addindex HTML_ALIGN_MEMBERS If the \c HTML_ALIGN_MEMBERS tag is set to \c YES, the members of classes, files or namespaces will be aligned in HTML using tables. If set to \c NO a bullet list will be used. Note: Setting this tag to \c NO will become obsolete in the future, since I only intent to support and test the aligned representation. \anchor cfg_generate_htmlhelp
\c GENERATE_HTMLHELP
\addindex GENERATE_HTMLHELP If the \c GENERATE_HTMLHELP tag is set to \c YES then doxygen generates three additional HTML index files: \c index.hhp, \c index.hhc, and \c index.hhk. The \c index.hhp is a project file that can be read by Microsoft HTML Help Workshop \latexonly (see http://msdn.microsoft.com/library/tools/htmlhelp/wkshp/download\_main.htm) \endlatexonly on Windows. The HTML Help Workshop contains a compiler that can convert all HTML output generated by doxygen into a single compressed HTML file (.chm). Compressed HTML files are now used as the Windows 98 help format, and will replace the old Windows help format (.hlp) on all Windows platforms in the future. Compressed HTML files also contain an index, a table of contents, and you can search for words in the documentation (which basically renders \c doxysearch obsolete on Windows). The HTML workshop also contains a viewer for compressed HTML files. \anchor cfg_generate_chi
\c GENERATE_CHI
\addindex GENERATE_CHI If the \c GENERATE_HTMLHELP tag is set to \c YES, the \c GENERATE_CHI flag controls if a separate .chi index file is generated (YES) or that it should be included in the master .chm file (NO). \anchor cfg_binary_toc
\c BINARY_TOC
\addindex BINARY_TOC If the \c GENERATE_HTMLHELP tag is set to \c YES, the \c BINARY_TOC flag controls whether a binary table of contents is generated (YES) or a normal table of contents (NO) in the .chm file. \anchor cfg_toc_expand
\c TOC_EXPAND
\addindex TOC_EXPAND The \c TOC_EXPAND flag can be set to YES to add extra items for group members to the table of contents of the HTML help documentation and to the tree view. \anchor cfg_disable_index
\c DISABLE_INDEX
\addindex DISABLE_INDEX If you want full control over the layout of the generated HTML pages it might be necessary to disable the index and replace it with your own. The \c DISABLE_INDEX tag can be used to turn on/off the condensed index at top of each page. A value of NO (the default) enables the index and the value YES disables it. \anchor cfg_enum_values_per_line
\c ENUM_VALUES_PER_LINE
\addindex ENUM_VALUES_PER_LINE This tag can be used to set the number of enum values (range [1..20]) that doxygen will group on one line in the generated HTML documentation. \anchor cfg_generate_treeview
\c GENERATE_TREEVIEW
\addindex GENERATE_TREEVIEW If the \c GENERATE_TREEVIEW tag is set to YES, a side pannel will be generated containing a tree-like index structure (just like the one that is generated for HTML Help). For this to work a browser that supports JavaScript and frames is required (for instance Netscape 4.0+ or Internet explorer 4.0+). \anchor cfg_treeview_width
\c TREEVIEW_WIDTH
\addindex TREEVIEW_WIDTH If the treeview is enabled (see \c GENERATE_TREEVIEW) then this tag can be used to set the initial width (in pixels) of the frame in which the tree is shown.
\subsection latex_output LaTeX related options \anchor cfg_generate_latex
\c GENERATE_LATEX
\addindex GENERATE_LATEX If the \c GENERATE_LATEX tag is set to \c YES (the default) doxygen will generate \f$\mbox{\LaTeX}\f$ output. \anchor cfg_latex_output
\c LATEX_OUTPUT
\addindex LATEX_OUTPUT The \c LATEX_OUTPUT tag is used to specify where the \f$\mbox{\LaTeX}\f$ docs will be put. If a relative path is entered the value of \c OUTPUT_DIRECTORY will be put in front of it. If left blank `latex' will be used as the default path. \anchor cfg_compact_latex
\c COMPACT_LATEX
\addindex COMPACT_LATEX If the \c COMPACT_LATEX tag is set to \c YES doxygen generates more compact \f$\mbox{\LaTeX}\f$ documents. This may be useful for small projects and may help to save some trees in general. \anchor cfg_paper_type
\c PAPER_TYPE
\addindex PAPER_TYPE The \c PAPER_TYPE tag can be used to set the paper type that is used by the printer. Possible values are: If left blank a4wide will be used. \anchor cfg_extra_packages
\c EXTRA_PACKAGES
\addindex EXTRA_PACKAGES The \c EXTRA_PACKAGES tag can be used to specify one or more \f$\mbox{\LaTeX}\f$ package names that should be included in the \f$\mbox{\LaTeX}\f$ output. To get the times font for instance you can specify \verbatim EXTRA_PACKAGES = times \endverbatim If left blank no extra packages will be included. \anchor cfg_latex_header
\c LATEX_HEADER
\addindex LATEX_HEADER The \c LATEX_HEADER tag can be used to specify a personal \f$\mbox{\LaTeX}\f$ header for the generated \f$\mbox{\LaTeX}\f$ document. The header should contain everything until the first chapter. If it is left blank doxygen will generate a standard header. See section \ref doxygen_usage for information on how to let doxygen write the default header to a separate file. \par Note: Only use a user defined header if you know what you are doing! The following commands have a special meaning inside the header: \$title, \$datetime, \$date, \$doxygenversion, \$projectname, \$projectnumber. Doxygen will replace them by respectively the title of the page, the current date and time, only the current date, the version number of doxygen, the project name (see \c PROJECT_NAME), or the project number (see \c PROJECT_NUMBER). \anchor cfg_pdf_hyperlinks
\c PDF_HYPERLINKS
\addindex PDF_HYPERLINKS If the \c PDF_HYPERLINKS tag is set to \c YES, the \f$\mbox{\LaTeX}\f$ that is generated is prepared for conversion to PDF (using ps2pdf). The PDF file will contain links (just like the HTML output) instead of page references This makes the output suitable for online browsing using a PDF viewer. \anchor cfg_latex_batchmode
\c LATEX_BATCHMODE
\addindex LATEX_BATCHMODE If the \c LATEX_BATCHMODE tag is set to \c YES, doxygen will add the \\batchmode. command to the generated \f$\mbox{\LaTeX}\f$ files. This will instruct \f$\mbox{\LaTeX}\f$ to keep running if errors occur, instead of asking the user for help. This option is also used when generating formulas in HTML.
\subsection rtf_output RTF related options \anchor cfg_generate_rtf
\c GENERATE_RTF
\addindex GENERATE_RTF If the \c GENERATE_RTF tag is set to \c YES doxygen will generate RTF output. The RTF output is optimised for Word 97 and may not look too pretty with other readers/editors. \anchor cfg_rtf_output
\c RTF_OUTPUT
\addindex RTF_OUTPUT The \c RTF_OUTPUT tag is used to specify where the RTF docs will be put. If a relative path is entered the value of \c OUTPUT_DIRECTORY will be put in front of it. If left blank \c rtf will be used as the default path. \anchor cfg_compact_rtf
\c COMPACT_RTF
\addindex COMPACT_RTF If the \c COMPACT_RTF tag is set to \c YES doxygen generates more compact RTF documents. This may be useful for small projects and may help to save some trees in general. \anchor cfg_rtf_hyperlinks
\c RTF_HYPERLINKS
\addindex RTF_HYPERLINKS If the \c RTF_HYPERLINKS tag is set to \c YES, the RTF that is generated will contain hyperlink fields. The RTF file will contain links (just like the HTML output) instead of page references. This makes the output suitable for online browsing using Word or some other Word compatible reader that support those fields. \par note: WordPad (write) and others do not support links. \anchor cfg_rtf_stylesheet_file
\c RTF_STYLESHEET_FILE
\addindex RTF_STYLESHEET_FILE Load stylesheet definitions from file. Syntax is similar to doxygen's config file, i.e. a series of assigments. You only have to provide replacements, missing definitions are set to their default value. See also section \ref doxygen_usage for information on how to generate the default style sheet that doxygen normally uses. \anchor cfg_rtf_extensions_file
\c RTF_EXTENSIONS_FILE
Set optional variables used in the generation of an RTF document. Syntax is similar to doxygen's config file. A template extensions file can be generated using doxygen -e rtf extensionFile.
\subsection man_output Man page related options \anchor cfg_generate_man
\c GENERATE_MAN
\addindex GENERATE_MAN If the \c GENERATE_MAN tag is set to \c YES (the default) doxygen will generate man pages for classes and files. \anchor cfg_man_output
\c MAN_OUTPUT
\addindex MAN_OUTPUT The \c MAN_OUTPUT tag is used to specify where the man pages will be put. If a relative path is entered the value of \c OUTPUT_DIRECTORY will be put in front of it. If left blank `man' will be used as the default path. A directory man3 will be created inside the directory specified by \c MAN_OUTPUT. \anchor cfg_man_extension
\c MAN_EXTENSION
\addindex MAX_EXTENSION The \c MAN_EXTENSION tag determines the extension that is added to the generated man pages (default is the subroutine's section .3) \anchor cfg_man_links
\c MAN_LINKS
\addindex MAN_LINKS If the \c MAN_LINKS tag is set to \c YES and doxygen generates man output, then it will generate one additional man file for each entity documented in the real man page(s). These additional files only source the real man page, but without them the man command would be unable to find the correct page. The default is \c NO.
\subsection config_prepro Preprocessor related options \anchor cfg_enable_preprocessing
\c ENABLE_PREPROCESSING
\addindex ENABLE_PREPROCESSING If the \c ENABLE_PREPROCESSING tag is set to \c YES (the default) doxygen will evaluate all C-preprocessor directives found in the sources and include files. \anchor cfg_macro_expansion
\c MACRO_EXPANSION
\addindex MACRO_EXPANSION If the \c MACRO_EXPANSION tag is set to \c YES doxygen will expand all macro names in the source code. If set to \c NO (the default) only conditional compilation will be performed. Macro expansion can be done in a controlled way by setting \c EXPAND_ONLY_PREDEF to \c YES. \anchor cfg_expand_only_predef
\c EXPAND_ONLY_PREDEF
\addindex EXPAND_ONLY_PREDEF If the \c EXPAND_ONLY_PREDEF and \c MACRO_EXPANSION tags are both set to YES then the macro expansion is limited to the macros specified with the \c PREDEFINED and \c EXPAND_AS_DEFINED tags. \anchor cfg_search_includes
\c SEARCH_INCLUDES
\addindex SEARCH_INCLUDES If the \c SEARCH_INCLUDES tag is set to \c YES (the default) the includes files in the \c INCLUDE_PATH (see below) will be searched if a \#include is found. \anchor cfg_include_path
\c INCLUDE_PATH
\addindex INCLUDE_PATH The \c INCLUDE_PATH tag can be used to specify one or more directories that contain include files that are not input files but should be processed by the preprocessor. \anchor cfg_predefined
\c PREDEFINED
\addindex PREDEFINED The \c PREDEFINED tag can be used to specify one or more macro names that are defined before the preprocessor is started (similar to the -D option of gcc). The argument of the tag is a list of macros of the form: name or name=definition (no spaces). If the definition and the = are omitted =1 is assumed. \anchor cfg_expand_as_defined
\c EXPAND_AS_DEFINED
\addindex EXPAND_AS_DEFINED If the \c MACRO_EXPANSION and \c EXPAND_PREDEF_ONLY tags are set to \c YES then this tag can be used to specify a list of macro names that should be expanded. The macro definition that is found in the sources will be used. Use the \c PREDEFINED tag if you want to use a different macro definition.
\subsection config_extref External reference options \anchor cfg_tagfiles
\c TAGFILES
\addindex TAGFILES The \c TAGFILES tag can be used to specify one or more tagfiles. See section \ref doxytag_usage for more information about the usage of tag files. Optionally an initial location of the external documentation can be added for each tagfile. The format of a tag file without this location is as follows:
TAGFILES = file1 file2 ... 
Adding location for the tag files is done as follows:
TAGFILES = file1=loc1 "file2 = loc2" ... 
where \c loc1 and \c loc2 can be relative or absolute paths or URLs, If a location is present for each tag, the installdox tool (see section \ref installdox_usage for more information) does not have to be run to correct the links. \par Note: Each tag file must have a unique name (where the name does \e not include the path) If a tag file is not located in the directory in which doxygen is run, you must also specify the path to the tagfile here. \anchor cfg_generate_tagfile
\c GENERATE_TAGFILE
\addindex GENERATE_TAGFILE When a file name is specified after \c GENERATE_TAGFILE, doxygen will create a tag file that is based on the input files it reads. See section \ref doxytag_usage for more information about the usage of tag files. \anchor cfg_allexternals
\c ALLEXTERNALS
\addindex ALLEXTERNALS If the \c ALLEXTERNALS tag is set to \c YES all external class will be listed in the class index. If set to \c NO only the inherited external classes will be listed. \anchor cfg_perl_path
\c PERL_PATH
\addindex PERL_PATH The \c PERL_PATH should be the absolute path and name of the perl script interpreter (i.e. the result of `which perl').
\subsection config_dot Dot options \anchor cfg_have_dot
\c HAVE_DOT
\addindex HAVE_DOT If you set the \c HAVE_DOT tag to \c YES then doxygen will assume the dot tool is available from the path. This tool is part of Graphviz, a graph visualization toolkit from AT&T and Lucent Bell Labs. The other options in this section have no effect if this option is set to \c NO (the default) \anchor cfg_class_graph
\c CLASS_GRAPH
\addindex CLASS_GRAPH If the \c CLASS_GRAPH and \c HAVE_DOT tags are set to \c YES then doxygen will generate a graph for each documented class showing the direct and indirect inheritance relations. Setting this tag to \c YES will force the the \c CLASS_DIAGRAMS tag to NO. \anchor cfg_collaboration_graph
\c COLLABORATION_GRAPH
\addindex COLLABORATION_GRAPH If the \c COLLABORATION_GRAPH and \c HAVE_DOT tags are set to \c YES then doxygen will generate a graph for each documented class showing the direct and indirect implementation dependencies (inheritance, containment, and class references variables) of the class with other documented classes. \anchor cfg_include_graph
\c INCLUDE_GRAPH
\addindex INCLUDE_GRAPH If the \c ENABLE_PREPROCESSING, \c SEARCH_INCLUDES, \c INCLUDE_GRAPH, and \c HAVE_DOT tags are set to \c YES then doxygen will generate a graph for each documented file showing the direct and indirect include dependencies of the file with other documented files. \anchor cfg_included_by_graph
\c INCLUDED_BY_GRAPH
\addindex INCLUDED_BY_GRAPH If the \c ENABLE_PREPROCESSING, \c SEARCH_INCLUDES, \c INCLUDED_BY_GRAPH, and \c HAVE_DOT tags are set to \c YES then doxygen will generate a graph for each documented header file showing the documented files that directly or indirectly include this file. \anchor cfg_graphical_hierarchy
\c GRAPHICAL_HIERARCHY
\addindex GRAPHICAL_HIERARCHY If the \c GRAPHICAL_HIERARCHY and \c HAVE_DOT tags are set to \c YES then doxygen will graphical hierarchy of all classes instead of a textual one. \anchor cfg_dot_path
\c DOT_PATH
\addindex DOT_PATH This tag can be used to specify the path where the dot tool can be found. If left blank, it is assumed the dot tool can be found on the path. \anchor cfg_max_dot_graph_height
\c MAX_DOT_GRAPH_HEIGHT
\addindex MAX_DOT_GRAPH_HEIGHT The \c MAX_DOT_GRAPH_HEIGHT tag can be used to set the maximum allows height (in pixels) of the graphs generated by dot. If a graph becomes larger than this value, doxygen will try to truncate the graph, so that it fits within the specified constraint. Beware that most browsers cannot cope with very large images. \anchor cfg_max_dot_graph_width
\c MAX_DOT_GRAPH_WIDTH
\addindex MAX_DOT_GRAPH_WIDTH The \c MAX_DOT_GRAPH_WIDTH tag can be used to set the maximum allowed width (in pixels) of the graphs generated by dot. If a graph becomes larger than this value, doxygen will try to truncate the graph, so that it fits within the specified constraint. Beware that most browsers cannot cope with very large images. \anchor cfg_generate_legend
\c GENERATE_LEGEND
\addindex GENERATE_LEGEND If the \c GENERATE_LEGEND tag is set to \c YES (the default) doxygen will generate a legend page explaining the meaning of the various boxes and arrows in the dot generated graphs.
\subsection config_search Search engine options \anchor cfg_searchengine
\c SEARCHENGINE
\addindex SEARCHENGINE The \c SEARCHENGINE tag specifies whether or not a search should be used. Possible values are \c YES and \c NO. If set to \c NO or left blank, the values of all other tags in this section will be ignored. \anchor cfg_cgi_name
\c CGI_NAME
\addindex CGI_NAME The \c CGI_NAME tag should be the name of the CGI script that starts the search engine (doxysearch) with the correct parameters. A script with this name will be generated by doxygen. \anchor cfg_cgi_url
\c CGI_URL
\addindex CGI_URL The \c CGI_URL tag should be the absolute URL to the directory where the cgi binaries are located. See the documentation of your HTTP daemon for details. \anchor cfg_doc_url
\c DOC_URL
\addindex DOC_URL The \c DOC_URL tag should be the absolute URL to the directory where the documentation is located. If left blank the absolute path to the documentation, with \c file:// prepended to it, will be used. This is correct for local viewing only. \anchor cfg_doc_abspath
\c DOC_ABSPATH
\addindex DOC_ABSPATH The \c DOC_ABSPATH tag should be the absolute path to the directory where the documentation is located. If left blank the directory on the local machine will be used. \anchor cfg_bin_abspath
\c BIN_ABSPATH
\addindex BIN_ABSPATH The \c BIN_ABSPATH tag must point to the directory where the doxysearch binary is installed. \anchor cfg_ext_doc_paths
\c EXT_DOC_PATHS
\addindex EXT_DOC_PATHS The \c EXT_DOC_PATHS tag can be used to specify one or more paths to documentation generated for other projects. This allows doxysearch to search the documentation for these projects as well. All paths must be absolute.

Examples

Suppose you have a simple project consisting of two files: a source file \c example.cc and a header file \c example.h. Then a minimal configuration file is as simple as: \verbatim INPUT = example.cc example.h \endverbatim Assuming the example makes use of Qt classes and perl is located in /usr/bin, a more realistic configuration file would be: \verbatim PROJECT_NAME = Example INPUT = example.cc example.h WARNINGS = YES TAGFILES = qt.tag PERL_PATH = /usr/bin/perl SEARCHENGINE = NO \endverbatim To generate the documentation for the QdbtTabular package I have used the following configuration file: \verbatim PROJECT_NAME = QdbtTabular OUTPUT_DIRECTORY = html WARNINGS = YES INPUT = examples/examples.doc src FILE_PATTERNS = *.cc *.h INCLUDE_PATH = examples TAGFILES = qt.tag PERL_PATH = /usr/local/bin/perl SEARCHENGINE = YES CGI_NAME = search.cgi CGI_URL = http://www.stack.nl/~dimitri/cgi-bin DOC_URL = http://www.stack.nl/~dimitri/qdbttabular DOC_ABSPATH = /home/dimitri/.html/qdbttabular BIN_ABSPATH = /home/dimitri/bin \endverbatim To regenerate the Qt-1.44 documentation from the sources, you could use the following config file: \verbatim PROJECT_NAME = Qt OUTPUT_DIRECTORY = qt_docs HIDE_UNDOC_MEMBERS = YES HIDE_UNDOC_CLASSES = YES ENABLE_PREPROCESSING = YES MACRO_EXPANSION = YES EXPAND_ONLY_PREDEF = YES SEARCH_INCLUDES = YES FULL_PATH_NAMES = YES STRIP_FROM_PATH = $(QTDIR)/ PREDEFINED = USE_TEMPLATECLASS Q_EXPORT= \ QArrayT:=QArray \ QListT:=QList \ QDictT:=QDict \ QQueueT:=QQueue \ QVectorT:=QVector \ QPtrDictT:=QPtrDict \ QIntDictT:=QIntDict \ QStackT:=QStack \ QDictIteratorT:=QDictIterator \ QListIteratorT:=QListIterator \ QCacheT:=QCache \ QCacheIteratorT:=QCacheIterator \ QIntCacheT:=QIntCache \ QIntCacheIteratorT:=QIntCacheIterator \ QIntDictIteratorT:=QIntDictIterator \ QPtrDictIteratorT:=QPtrDictIterator INPUT = $(QTDIR)/doc \ $(QTDIR)/src/widgets \ $(QTDIR)/src/kernel \ $(QTDIR)/src/dialogs \ $(QTDIR)/src/tools FILE_PATTERNS = *.cpp *.h q*.doc INCLUDE_PATH = $(QTDIR)/include RECURSIVE = YES \endverbatim For the Qt-2.1 sources I recommand to use the following settings: \verbatim PROJECT_NAME = Qt PROJECT_NUMBER = 2.1 HIDE_UNDOC_MEMBERS = YES HIDE_UNDOC_CLASSES = YES SOURCE_BROWSER = YES INPUT = $(QTDIR)/src FILE_PATTERNS = *.cpp *.h q*.doc RECURSIVE = YES EXCLUDE_PATTERNS = *codec.cpp moc_* */compat/* */3rdparty/* ALPHABETICAL_INDEX = YES COLS_IN_ALPHA_INDEX = 3 IGNORE_PREFIX = Q ENABLE_PREPROCESSING = YES MACRO_EXPANSION = YES INCLUDE_PATH = $(QTDIR)/include PREDEFINED = Q_PROPERTY(x)= \ Q_OVERRIDE(x)= \ Q_EXPORT= \ Q_ENUMS(x)= \ "QT_STATIC_CONST=static const " \ _WS_X11_ \ INCLUDE_MENUITEM_DEF EXPAND_ONLY_PREDEF = YES EXPAND_AS_DEFINED = Q_OBJECT_FAKE Q_OBJECT ACTIVATE_SIGNAL_WITH_PARAM \ Q_VARIANT_AS \endverbatim Here doxygen's preprocessor is used to substitute some macro names that are normally substituted by the C preprocessor, but without doing full macro expansion. */